FL-MGD-INFRASTRUCT-MIB
1230 objects
Phoenix Contact private SNMP objects of the FL Managed Infrastructure Product Group.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| OSPF-MIB | ospfAreaEntry ospfIfEntry ospfVirtIfEntry RouterID |
| Q-BRIDGE-MIB | dot1qStaticMulticastEntry dot1qVlanIndex PortList |
| RIPv2-MIB | rip2IfConfEntry |
| SNMPv2-SMI | enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| VRRP-MIB | vrrpOperVrId |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4346 | NodephoenixContact | |||
| 1.3.6.1.4.1.4346.1 | NodepxcModules | |||
| 1.3.6.1.4.1.4346.1.8 | IdentityflMgdInfrastructureMibModule | Phoenix Contact private SNMP objects of the FL Managed Infrastructure Product Group. | ||
| 1.3.6.1.4.1.4346.2 | NodepxcGlobal | |||
| 1.3.6.1.4.1.4346.2.1 | NodepxcBasic | |||
| 1.3.6.1.4.1.4346.2.1.1 | ScalarpxcBasicName | read-only | current | The device will always return the company name: Phoenix Contact GmbH & Co. KG |
| 1.3.6.1.4.1.4346.2.1.2 | ScalarpxcBasicDescr | read-only | current | The device will always return the company description: Phoenix Contact GmbH & Co. KG, D-32823 Blomberg |
| 1.3.6.1.4.1.4346.2.1.3 | ScalarpxcBasicURL | read-only | current | The device will always return the URL of company web page of Phoenix Contact: http://www.phoenixcontact.com/ |
| 1.3.6.1.4.1.4346.11 | NodepxcFactoryLine | |||
| 1.3.6.1.4.1.4346.11.1 | NodeflGlobal | |||
| 1.3.6.1.4.1.4346.11.1.1 | NodeflBasic | |||
| 1.3.6.1.4.1.4346.11.1.1.1 | ScalarflBasicName | read-only | current | The device will always return the product group name: Factory Line |
| 1.3.6.1.4.1.4346.11.1.1.2 | ScalarflBasicDescr | read-only | current | The device will always return the product group description: Ethernet Installation System |
| 1.3.6.1.4.1.4346.11.1.1.3 | ScalarflBasicURL | read-only | current | The device will always return the URL of product group web page within the web space of Phoenix Contact: http://www.factoryline.de/ |
| 1.3.6.1.4.1.4346.11.1.1.4 | ScalarflBasicCompCapacity | read-only | current | This objects indicates the number of available components of the product group Factory Line, which can be used together with this administrable component. |
| 1.3.6.1.4.1.4346.11.1.2 | NodeflComponents | |||
| 1.3.6.1.4.1.4346.11.1.2.1 | TableflComponentsTable | not-accessible | current | Table of descriptive information about the available components of the product group Factory Line, which can be used together with this administrable component. |
| 1.3.6.1.4.1.4346.11.1.2.1.1 | RowflComponentsEntry | not-accessible | current | An entry in the table, containing information about a single component (product) from Factory Line. |
| 1.3.6.1.4.1.4346.11.1.2.1.1.1 | ColumnflComponentsIndex | read-only | current | This object identifies the component within the product group Factory Line for which this entry contains information. |
| 1.3.6.1.4.1.4346.11.1.2.1.1.2 | ColumnflComponentsName | read-only | current | This object contains the component name. |
| 1.3.6.1.4.1.4346.11.1.2.1.1.3 | ColumnflComponentsDescr | read-only | current | This object contains the component description. |
| 1.3.6.1.4.1.4346.11.1.2.1.1.4 | ColumnflComponentsURL | read-only | current | This object contains the URL of component's web page within the web space of Phoenix Contact. |
| 1.3.6.1.4.1.4346.11.1.2.1.1.5 | ColumnflComponentsOrderNumber | read-only | current | This object contains the component order number. |
| 1.3.6.1.4.1.4346.11.11 | NodeflWorkDevice | |||
| 1.3.6.1.4.1.4346.11.11.1 | NodeflWorkBasic | |||
| 1.3.6.1.4.1.4346.11.11.1.1 | ScalarflWorkBasicName | read-write | current | The device will always return his name. At the delivery time to the customer an default value is already present. After an firmware update it may be possible t… |
| 1.3.6.1.4.1.4346.11.11.1.2 | ScalarflWorkBasicDescr | read-write | current | The device will always return his description. At the delivery time to the customer an default value is already present. After an firmware update it may be pos… |
| 1.3.6.1.4.1.4346.11.11.1.3 | ScalarflWorkBasicURL | read-only | current | The device will always return the web page URL of itself: http://ip_addr/ In further kinds it may be that instead of the ip_addr the full qualified domain name… |
| 1.3.6.1.4.1.4346.11.11.1.4 | ScalarflWorkBasicSerialNumber | read-only | current | The device will always return the serial number of itself. That are eight or twelve digits presented as string value. |
| 1.3.6.1.4.1.4346.11.11.1.5 | ScalarflWorkBasicHWRevision | read-only | current | The device will always return the hardware revision code of itself. |
| 1.3.6.1.4.1.4346.11.11.1.6 | ScalarflWorkBasicPowerStat | read-only | current | This object presents power status of itself. |
| 1.3.6.1.4.1.4346.11.11.1.7 | ScalarflWorkBasicSystemBusRevision | read-only | current | The device will always return revision code of the system bus. |
| 1.3.6.1.4.1.4346.11.11.1.11 | ScalarflWorkBasicCompMaxCapacity | read-only | current | The device will always return the maximum of interfaces which theoretical may be connected. |
| 1.3.6.1.4.1.4346.11.11.1.12 | ScalarflWorkBasicCompCapacity | read-only | current | The device will alway return the number of really connected interfaces. This value is never greater than flWorkBasicCompMaxCapacity. |
| 1.3.6.1.4.1.4346.11.11.1.13 | ScalarflWorkBasicLogicRevision | read-only | current | This will deliver the actual revision of several logic devices inside the system. |
| 1.3.6.1.4.1.4346.11.11.1.14 | ScalarflWorkBasicPlatformID | read-only | current | This will return the actual revision of the platform ID. |
| 1.3.6.1.4.1.4346.11.11.1.15 | ScalarflWorkBasicFwGeneration | read-only | current | This will return the actual revision of the firmware generation. |
| 1.3.6.1.4.1.4346.11.11.1.16 | ScalarflWorkBasicCfGeneration | read-only | current | This will return the actual revision of the configuration generation. |
| 1.3.6.1.4.1.4346.11.11.1.17 | TableflWorkBasicPortTable | not-accessible | current | Table which shows information about the user interfaces. |
| 1.3.6.1.4.1.4346.11.11.1.17.1 | RowflWorkBasicPortEntry | not-accessible | current | Each entry in this table represents an information instance about a single user interface. |
| 1.3.6.1.4.1.4346.11.11.1.17.1.1 | ColumnflWorkBasicPortIdx | read-only | current | Each index is the number of an information instance about a single user interface. |
| 1.3.6.1.4.1.4346.11.11.1.17.1.2 | ColumnflWorkBasicPortService | read-only | current | User interface service |
| 1.3.6.1.4.1.4346.11.11.1.17.1.3 | ColumnflWorkBasicPortProtocol | read-only | current | Used protocol |
| 1.3.6.1.4.1.4346.11.11.1.17.1.4 | ColumnflWorkBasicPortTransport | read-only | current | Used transport protocol |
| 1.3.6.1.4.1.4346.11.11.1.17.1.5 | ColumnflWorkBasicPort | read-only | current | Used port |
| 1.3.6.1.4.1.4346.11.11.2 | NodeflWorkComponents | |||
| 1.3.6.1.4.1.4346.11.11.2.1 | TableflWorkComponentsTable | not-accessible | current | Table of information about the available interface modules of the current device union. |
| 1.3.6.1.4.1.4346.11.11.2.1.1 | RowflWorkComponentsEntry | not-accessible | current | An entry in the table, containing information about a single interface module of current device union. |
| 1.3.6.1.4.1.4346.11.11.2.1.1.1 | ColumnflWorkComponentsIndex | read-only | current | This object identifies the interface module within the device union for which this entry contains information. |
| 1.3.6.1.4.1.4346.11.11.2.1.1.2 | ColumnflWorkComponentsOID | read-only | current | This OID points to the correspondent component entry in flComponents group. |
| 1.3.6.1.4.1.4346.11.11.2.1.1.3 | ColumnflWorkComponentsURL | read-only | current | The device will always return the web page URL of itself within the devices web space which contains information about the component: http://ip_addr/ In furthe… |
| 1.3.6.1.4.1.4346.11.11.2.1.1.4 | ColumnflWorkComponentsDevSign | read-only | current | Reports the device sign of the interface module like defined by the vendor. |
| 1.3.6.1.4.1.4346.11.11.3 | NodeflWorkTraps | |||
| 1.3.6.1.4.1.4346.11.11.3.0 | NodeflWorkTrapsDelemeter | |||
| 1.3.6.1.4.1.4346.11.11.3.0.1 | NotificationtrapPasswdAccess | current | Every write access to the device's password send out this trap to all known trap destination named in table flWorkFWCtrlTrapDestTable. So it informs the manage… | |
| 1.3.6.1.4.1.4346.11.11.3.0.2 | NotificationtrapFWHealth | current | The trap trapFWHealth conveys information related to the operational status of the firmware. This trap is send when the display changes and that is equivalent … | |
| 1.3.6.1.4.1.4346.11.11.3.0.3 | NotificationtrapFWConf | current | Every time the device's component configuration was saved this trap is sending out to inform the management system about successful operation (configSaved). Fu… | |
| 1.3.6.1.4.1.4346.11.11.3.0.4 | NotificationtrapPowerSupply | current | Every time the redundant power supply has been lost this trap is sending out to inform the management system about the event. | |
| 1.3.6.1.4.1.4346.11.11.3.0.5 | NotificationtrapSecurityPort | current | Every time a not allowed mac address is received at a port with active mac based security for the first time this trap is sending out to inform the management … | |
| 1.3.6.1.4.1.4346.11.11.3.0.6 | NotificationtrapRstpRingFailure | current | Every time the Rapid Spanning Tree Fast Ring Detection detects a link failure at a ring port this trap is sending out to inform the management system about the… | |
| 1.3.6.1.4.1.4346.11.11.3.0.7 | NotificationtrapPofScrjPort | current | Every time the interface status of a POF SCRJ port changes into a critical state or leaves a critical state this trap is sent out to inform the management syst… | |
| 1.3.6.1.4.1.4346.11.11.3.0.8 | NotificationtrapPoEPort | current | Every time the fault status of a PoE port changes this trap is sent out to inform the management system about the event. | |
| 1.3.6.1.4.1.4346.11.11.3.0.9 | NotificationtrapMrpStatusChange | current | Manager-only: It reports a ring-state change. | |
| 1.3.6.1.4.1.4346.11.11.3.0.10 | NotificationtrapTemperatureManagement | current | This is a trap that shows that an under- or overtemperature condition did occour on the device. | |
| 1.3.6.1.4.1.4346.11.11.3.0.11 | NotificationtrapDigitalInput | current | This is a trap that shows that one of the digital inputs of the device did change its status. | |
| 1.3.6.1.4.1.4346.11.11.3.0.12 | NotificationtrapSDcardPluggedin | current | This trap informs the manager that an SD card is plugged in to the device which is sending this trap. | |
| 1.3.6.1.4.1.4346.11.11.3.0.13 | NotificationtrapSDcardPluggedout | current | This trap informs the manager that an SD card is plugged out of the device which is sending this trap. | |
| 1.3.6.1.4.1.4346.11.11.3.0.16 | NotificationtrapConfSaved | current | Every time the device's component configuration was saved this trap is sending out to inform the management system about successful operation (configSaved). | |
| 1.3.6.1.4.1.4346.11.11.3.0.18 | NotificationtrapIPconflict | current | Reports ip conflict only when flWorkNetACDStatus has the value noConflict(2) before the conflict was detected. | |
| 1.3.6.1.4.1.4346.11.11.3.0.19 | NotificationtrapDLRRingChange | current | This trap informs the manager that a DLR supervisor has discovered a change in the ring state. | |
| 1.3.6.1.4.1.4346.11.11.3.0.20 | NotificationtrapPowerSupplyLow | current | Every time the device detects, that the power supply voltage is below the warning level, the management system is informed about this by this trap. | |
| 1.3.6.1.4.1.4346.11.11.3.0.21 | NotificationtrapConfigDiff | current | This trap informs the manager that an Configuration Difference has been detected between Memory Module and internal memory. | |
| 1.3.6.1.4.1.4346.11.11.3.0.25 | NotificationtrapCrcOk | current | The crc port status changed to Ok. | |
| 1.3.6.1.4.1.4346.11.11.3.0.26 | NotificationtrapCrcWarning | current | The crc port status changed to Warning. | |
| 1.3.6.1.4.1.4346.11.11.3.0.27 | NotificationtrapCrcCritical | current | The crc port status changed to Critical. | |
| 1.3.6.1.4.1.4346.11.11.3.0.28 | NotificationtrapCrcPeakIncreased | current | The crc proportion peak increased. | |
| 1.3.6.1.4.1.4346.11.11.3.0.29 | NotificationtrapEventTableOverflow | current | Event Table Overflow. | |
| 1.3.6.1.4.1.4346.11.11.3.0.30 | NotificationtrapUserConfigChanged | current | User Config Changed. | |
| 1.3.6.1.4.1.4346.11.11.3.0.31 | NotificationtrapConfigParamChanged | current | Config Param Changed. | |
| 1.3.6.1.4.1.4346.11.11.3.0.99 | NotificationtrapManagerConnection | current | This is a trap to test the connection from the device to the trap manager(s). | |
| 1.3.6.1.4.1.4346.11.11.4 | NodeflWorkNet | |||
| 1.3.6.1.4.1.4346.11.11.4.1 | NodeflWorkNetIfParameter | |||
| 1.3.6.1.4.1.4346.11.11.4.1.1 | ScalarflWorkNetIfParamPhyAddress | read-only | current | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.4.1.4346.11.11.4.1.2 | ScalarflWorkNetIfParamIpAddress | read-write | current | The ip address of this device. Changing this object will take effect after setting the object flWorkNetIfParamSave to apply(2). Note: For some products a reboo… |
| 1.3.6.1.4.1.4346.11.11.4.1.3 | ScalarflWorkNetIfParamSubnetmask | read-write | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.4346.11.11.4.1.4 | ScalarflWorkNetIfParamGwIpAddress | read-write | current | IP address of the default gateway. Changing this object will take effect after setting the object flWorkNetIfParamSave to appFor some products a reboot is requ… |
| 1.3.6.1.4.1.4346.11.11.4.1.5 | ScalarflWorkNetIfParamStatus | read-only | current | This object is used to synchronize the modification of the IP parameters used by the protocol stack based on the flWorkNetIfParameter MIB objects. If flWorkNet… |
| 1.3.6.1.4.1.4346.11.11.4.1.6 | ScalarflWorkNetIfParamSave | read-write | current | This object is used to save the modification of the IP parameters used by the protocol stack based on the flWorkNetIfParameter MIB objects. This allows the use… |
| 1.3.6.1.4.1.4346.11.11.4.1.7 | ScalarflWorkNetIfParamAssignment | read-write | current | Kind of the IP address assignment. The supported options of the device are described in the user manual of the product. Some options become effective after res… |
| 1.3.6.1.4.1.4346.11.11.4.1.8 | ScalarflWorkNetIfParamManagementVlanId | read-write | current | Vlan ID of the management agent in the case the device is running in mode VLAN Tagging. |
| 1.3.6.1.4.1.4346.11.11.4.1.9 | ScalarflWorkNetIfParamConflictDetection | read-write | current | Kind of mechanism to detect IP address conflict. |
| 1.3.6.1.4.1.4346.11.11.4.1.10 | TableflWorkNetIfParamDnsServerTable | not-accessible | current | Table of host ip addresses for available DNS servers. |
| 1.3.6.1.4.1.4346.11.11.4.1.10.1 | RowflWorkNetIfParamDnsServerEntry | not-accessible | current | Each entry in the table contains one host ip address for a DNS server. |
| 1.3.6.1.4.1.4346.11.11.4.1.10.1.1 | ColumnflWorkNetIfParamDnsServerIndex | read-only | current | This object identifies the DNS server over host ip address which this entry named. |
| 1.3.6.1.4.1.4346.11.11.4.1.10.1.2 | ColumnflWorkNetIfParamDnsServerIPAddr | read-write | current | DNS server IP address. This must be configured if hostnames are used on the device. |
| 1.3.6.1.4.1.4346.11.11.4.2 | NodeflWorkNetPort | |||
| 1.3.6.1.4.1.4346.11.11.4.2.1 | ScalarflWorkNetPortCapacity | read-only | current | This object will always return the number of network ports. |
| 1.3.6.1.4.1.4346.11.11.4.2.2 | TableflWorkNetPortTable | not-accessible | current | Table of network ports. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1 | RowflWorkNetPortEntry | not-accessible | current | An entry in the table, containing information of one network port. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.1 | ColumnflWorkNetPortIndex | read-only | current | This object identifies the port. This value is never greater then flWorkNetPortCapacity. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.2 | ColumnflWorkNetPortLinkState | read-only | current | Get back the current state of the port link. The state farEndFault(3) indicates that this fiber optic port receives a signal but the other port of the path don… |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.3 | ColumnflWorkNetPortSpeed | read-only | current | The current interface's bandwidth in bits per second. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.4 | ColumnflWorkNetPortDuplexMode | read-only | current | The current duplex mode of this port. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.5 | ColumnflWorkNetPortNegotiation | read-only | current | This object gives an information if auto negotiation is active or not. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.6 | ColumnflWorkNetPortName | read-write | current | The textual name of this interface, e.g., 'robot 1'. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.7 | ColumnflWorkNetPortEnable | read-write | current | This object is enable(2) when this interface is enabled and disable(1) when it is disabled. A disabled interfaces doesn't send any data packets. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.8 | ColumnflWorkNetPortLinkMonitoring | read-write | current | Setting this object to enable(2) activates the link monitoring for this. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.9 | ColumnflWorkNetPortModus | read-write | current | The modus of this port defined by the user: autonegotiation(1) - auto negotiation half-10(2) - 10 MBit Half Duplex full-10(3) - 10 MBit Full Duplex half-100(4)… |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.10 | ColumnflWorkNetPortSTPEnable | read-write | deprecated | Firmware with Rapid Spanning Tree: The value of this object is equal to the status of the object dot1dStpPortEnable. When Rapid Spanning Tree is operating this… |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.11 | ColumnflWorkNetPortIfIndex | read-only | current | The ifIndex of this application 'logical port' (see interface table of the mib2). |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.12 | ColumnflWorkNetPortLLWHPort | read-only | current | A value that uniquely identifies a application 'logical port' (i.e., IEEE 802.3ad Aggregator) in the stack. This is a 'Layered Linear With Holes' (LLWH) port n… |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.13 | ColumnflWorkNetPortType | read-only | current | The media type of this port. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.14 | ColumnflWorkNetPortModuleName | read-only | current | The textual name of this module. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.15 | ColumnflWorkNetPortInterfaceName | read-only | current | The textual name of this interface according to the labeling of the device. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.16 | ColumnflWorkNetPortPriorityLevel | read-write | current | Choose the priority level for the incoming packets of one port in the switch by selecting a level in the range from 0 to 7. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.17 | ColumnflWorkNetPortPofTransmittingPower | read-only | current | This objects shows the selected transmitting power of POF ports. For polymer fiber (POF) paths < 20 m (65.62 ft.) the transmission power must be reduced by sli… |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.18 | ColumnflWorkNetPortStpMode | read-only | current | The mode of Spanning Tree Protocol the port is currently running. The value stp(1) indicates the Spanning Tree Protocol, rstp(2) indicates the Rapid Spanning T… |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.20 | ColumnflWorkNetPortFlowControl | read-write | current | Setting this object to disable(1) inactivates the flow control mechanism for this port. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.21 | ColumnflWorkNetPortMaxFrameSize | read-write | current | This object configures the maximum transmission unit(MTU) or the size of the largest packet that can be sent/received on the interface. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.22 | ColumnflWorkNetPortJumboFrame | read-write | current | This object enables/disables jumbo frames on an interface. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.23 | ColumnflWorkNetPortCableLength | read-only | current | The length of the table connected to this port in meters. |
| 1.3.6.1.4.1.4346.11.11.4.2.2.1.24 | ColumnflWorkNetPortPHYcompatibility | read-write | current | This object activates some compatibility modes for PHY. |
| 1.3.6.1.4.1.4346.11.11.4.2.3 | TableflWorkNetPortPoETable | not-accessible | current | Table of PoE (Pover over Ethernet) properties of network ports. |
| 1.3.6.1.4.1.4346.11.11.4.2.3.1 | RowflWorkNetPortPoEEntry | not-accessible | current | An entry in the table, containing information of PoE of one network port. |
| 1.3.6.1.4.1.4346.11.11.4.2.3.1.1 | ColumnflWorkNetPortPoEIndex | read-only | current | This object identifies the port. This value is never greater then flWorkNetPortCapacity. |
| 1.3.6.1.4.1.4346.11.11.4.2.3.1.2 | ColumnflWorkNetPortPoEPowerEnable | read-write | current | Get back or set the current state of the PoE device on this port. enabled(1) = power on this port is/should be enabled disabled(2) = power on this port is/shou… |
| 1.3.6.1.4.1.4346.11.11.4.2.3.1.3 | ColumnflWorkNetPortPoECurrentLimitation | read-write | current | Get back or set the current limitation state of the PoE device on this port. on(1) = limits output current to 90mA if a class 1 device is connected off(2) = cu… |
| 1.3.6.1.4.1.4346.11.11.4.2.3.1.4 | ColumnflWorkNetPortPoEDeviceClass | read-only | current | Get back the device class type of the device connected to this port or recently connected to this port. class0(0) class1(1) class2(2) class3(3) class4(4) Devic… |
| 1.3.6.1.4.1.4346.11.11.4.2.3.1.5 | ColumnflWorkNetPortPoEOutputCurrent | read-only | current | Get back output current in mA actually delivered on this port |
| 1.3.6.1.4.1.4346.11.11.4.2.3.1.6 | ColumnflWorkNetPortPoEOutputVoltage | read-only | current | Get back output voltage in mV actually delivered on this port |
| 1.3.6.1.4.1.4346.11.11.4.2.3.1.7 | ColumnflWorkNetPortPoEFaultStatus | read-only | current | Get back the fault status of the PoE device on this port noFault(0) = no fault status detected at all voltage(1) = external supply voltage fault thermal(2) = o… |
| 1.3.6.1.4.1.4346.11.11.4.2.3.1.8 | ColumnflWorkNetPortPoeFaultMonitoring | read-write | current | This object can be set to 'enable' if the user wants any error concerning an PoE module on this port to be monitored. If errors are monitored and if any malfun… |
| 1.3.6.1.4.1.4346.11.11.4.2.4 | TableflWorkNetPortPofScrjIfTable | not-accessible | current | Table of POF SCRJ port properties. |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1 | RowflWorkNetPortPofScrjIfEntry | not-accessible | current | An entry in the table, containing information about one POF SCRJ port. |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.1 | ColumnflWorkNetPortPofScrjIfIndex | read-only | current | This object identifies the port. This value is never greater then flWorkNetPortCapacity. |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.2 | ColumnflWorkNetPortPofScrjIfStatus | read-only | current | This delivers the current status of the POF SCRJ interface on the selected port. Meanings are: notSupported(1) = The actual hw does not support POF SCRJ interf… |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.4 | ColumnflWorkNetPortPofScrjIfSupplyVoltage | read-only | current | Delivers the actual supply voltage of the transceiver device on the given port in 0.1 Volt. (i.e. range is von 0 to 6,5V) |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.6 | ColumnflWorkNetPortPofScrjIfTxPower | read-only | current | Delivers the actual transmission power of the transceiver device on the given port in 0.1uW. (i.e. range is von 0 to 0,006553 W) |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.7 | ColumnflWorkNetPortPofScrjIfRxPower | read-only | current | Delivers the actual reception power of the transceiver device on the given port in 0.1uW. (i.e. range is von 0 to 0,006553 W) |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.8 | ColumnflWorkNetPortPofScrjIfSystemReserve | read-only | current | Delivers the remaining system reserve in units of 0.1dB |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.9 | ColumnflWorkNetPortPofScrjIfRxPowerHighAlarm | read-only | current | Deliverst if the Rx power high alarm for a given port is set (present(2)) or not set (notPresent(1)) |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.10 | ColumnflWorkNetPortPofScrjIfRxPowerLowAlarm | read-only | current | Deliverst if the Rx power low alarm for a given port is set (present(2)) or not set (notPresent(1)) |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.11 | ColumnflWorkNetPortPofScrjIfRxPowerHighWarning | read-only | current | Deliverst if the Rx power high warning for a given port is set (present(2)) or not set (notPresent(1)) |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.12 | ColumnflWorkNetPortPofScrjIfRxPowerLowWarning | read-only | current | Delivers if the Rx power low warning for a given port is set (present(2)) or not set (notPresent(1)) |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.13 | ColumnflWorkNetPortPofScrjIfManufacturer | read-only | current | Delivers the name of the manufacturer that did produce the POF SCRJ transceiver device on the given port |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.14 | ColumnflWorkNetPortPofScrjIfManufactOui | read-only | current | Delivers the IEEE manufacturer ID of the manufacturer that did produce the POF SCRJ transceiver device on the given port |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.16 | ColumnflWorkNetPortPofScrjIfRevision | read-only | current | Delivers the revision of the POF SCRJ transceiver device on the given port |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.17 | ColumnflWorkNetPortPofScrjIfWavelength | read-only | current | Delivers the wavelength in units of nm the POF SCRJ transceiver device on the given port is using for signal generation |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.18 | ColumnflWorkNetPortPofScrjIfTransceiverOptions | read-only | current | Gives detailed informations about the implemented features of th POF SCRJ transceiver on the given port. You have to take a look at the binary representation o… |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.19 | ColumnflWorkNetPortPofScrjIfSerialNumber | read-only | current | Delivers the serial number of the POF SCRJ transceiver device on the given port |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.20 | ColumnflWorkNetPortPofScrjIfDatecodeAndLot | read-only | current | Delivers the manufacturing date an lot number of the POF SCRJ transceiver on the given port. BYTE 1 + 2: Year BYTE 3 + 4: MONTH BYTE 5 + 6: DAY BYTE 7 + 8: LOT… |
| 1.3.6.1.4.1.4346.11.11.4.2.4.1.21 | ColumnflWorkNetPortPofScrjIfAlarmContactEnable | read-write | current | If this object is switched to enable the alarm contact will open if this POF SCRJ transceiver reaches a critical RX power state. See object flWorkFWCtrlAlarmCo… |
| 1.3.6.1.4.1.4346.11.11.4.2.5 | TableflWorkNetSFPModuleTable | not-accessible | current | Table of available sfp modules. |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1 | RowflWorkNetSFPModuleEntry | not-accessible | current | An entry in the table, containing information of one sfp module. |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1.1 | ColumnflWorkNetSFPModuleIndex | read-only | current | This object identifies the sfp slot. This value is never greater then flWorkNetPortCapacity. |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1.2 | ColumnflWorkNetSFPModuleType | read-only | current | This object identifies the gigabit ethernet compliance type. |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1.3 | ColumnflWorkNetSFPModuleMedia | read-only | current | This object identifies the media type which should be used with this module. Multi-mode types can be differed by the core diameter 50um or 62,5 um. Some module… |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1.4 | ColumnflWorkNetSFPModuleVendor | read-only | current | This object represent the vendor name string. |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1.5 | ColumnflWorkNetSFPModulePartNo | read-only | current | This object represent the part number of this kind of module. |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1.6 | ColumnflWorkNetSFPModuleSerialNo | read-only | current | This object represent the serial number. |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1.7 | ColumnflWorkNetSFPModuleRev | read-only | current | This object represent the revision string. |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1.8 | ColumnflWorkNetSFPModuleLinkLength | read-only | current | This object represents the link length in meter which is supported by this module. |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1.9 | ColumnflWorkNetSFPModuleBitrate | read-only | current | This object represents the nominal bitrate in units of 100MBit/s. |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1.10 | ColumnflWorkNetSFPModuleTransceiverCode | read-only | current | This object returns the unchanged transceiver identify code of the SFP module. |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1.11 | ColumnflWorkNetSFPModuleEncoding | read-only | current | This object represents the encoding mechanism used by this module. |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1.12 | ColumnflWorkNetSFPPortTxPower | read-only | current | This object represents the current optical power of the Transmitter unit in increments of 0,1dBm. |
| 1.3.6.1.4.1.4346.11.11.4.2.5.1.13 | ColumnflWorkNetSFPPortRxPower | read-only | current | This object represents the current received optical power in increments of 0,1dBm. |
| 1.3.6.1.4.1.4346.11.11.4.3 | NodeflWorkNetIfList | |||
| 1.3.6.1.4.1.4346.11.11.4.3.1 | TableflWorkNetIfTable | not-accessible | current | Table of descriptive information about the available components of the product group Factory Line, which can be used together with this administrable component. |
| 1.3.6.1.4.1.4346.11.11.4.3.1.1 | RowflWorkNetIfEntry | not-accessible | current | An entry in the table, containing information about a single component (product) from Factory Line. |
| 1.3.6.1.4.1.4346.11.11.4.3.1.1.1 | ColumnflWorkNetIfPhyAddress | read-only | current | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.4.1.4346.11.11.4.3.1.1.2 | ColumnflWorkNetIfIpAddress | read-write | current | The ip address of this device. Changing this object will take effect after setting the object flWorkNetIfParamSave to apply(2). Note: For some products a reboo… |
| 1.3.6.1.4.1.4346.11.11.4.3.1.1.3 | ColumnflWorkNetIfSubnetmask | read-write | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.4346.11.11.4.3.1.1.4 | ColumnflWorkNetIfGwIpAddress | read-write | current | IP address of the default gateway. Changing this object will take effect after setting the object flWorkNetIfParamSave to appFor some products a reboot is requ… |
| 1.3.6.1.4.1.4346.11.11.4.3.1.1.5 | ColumnflWorkNetIfStatus | read-only | current | This object is used to synchronize the modification of the IP parameters used by the protocol stack based on the flWorkNetIfParameter MIB objects. If flWorkNet… |
| 1.3.6.1.4.1.4346.11.11.4.3.1.1.6 | ColumnflWorkNetIfSave | read-write | current | This object is used to save the modification of the IP parameters used by the protocol stack based on the flWorkNetIfParameter MIB objects. This allows the use… |
| 1.3.6.1.4.1.4346.11.11.4.3.1.1.7 | ColumnflWorkNetIfAssignment | read-write | current | Kind of the IP address assignment. Setting the kind of assignment to bootp(2) or dcp(4) become effective after a restart of the device. |
| 1.3.6.1.4.1.4346.11.11.4.3.1.1.8 | ColumnflWorkNetIfManagementVlanId | read-write | current | Vlan ID of the management agent in the case the device is running in mode VLAN Tagging. |
| 1.3.6.1.4.1.4346.11.11.4.5 | NodeflWorkNetACD | |||
| 1.3.6.1.4.1.4346.11.11.4.5.1 | ScalarflWorkNetACDStatus | read-only | current | Status of the detection mechanism. |
| 1.3.6.1.4.1.4346.11.11.4.5.2 | ScalarflWorkNetACDIP | read-only | current | IP address of the last detected conflict. |
| 1.3.6.1.4.1.4346.11.11.4.5.3 | ScalarflWorkNetACDMAC | read-only | current | MAC address of the last detected conflict. |
| 1.3.6.1.4.1.4346.11.11.11 | NodeflWorkFirmware | |||
| 1.3.6.1.4.1.4346.11.11.11.1 | NodeflWorkFWInfo | |||
| 1.3.6.1.4.1.4346.11.11.11.1.1 | ScalarflWorkFWInfoVersion | read-only | current | This object represents the version string of the firmware release. |
| 1.3.6.1.4.1.4346.11.11.11.1.2 | ScalarflWorkFWInfoState | read-only | current | This object represent the current status string of the firmware release. |
| 1.3.6.1.4.1.4346.11.11.11.1.3 | ScalarflWorkFWInfoDate | read-only | current | This object represent the compiling date string of the firmware release. |
| 1.3.6.1.4.1.4346.11.11.11.1.4 | ScalarflWorkFWInfoTime | read-only | current | This object represent the compiling time string of the firmware release. |
| 1.3.6.1.4.1.4346.11.11.11.1.5 | ScalarflWorkFWInfoCopyright | read-only | current | This object represent the current copyright string of the firmware release like next: Copyright by Phoenix Contact GmbH & Co. KG, 2003 All alphanumeric charact… |
| 1.3.6.1.4.1.4346.11.11.11.1.6 | ScalarflWorkFWInfoBootVersion | read-only | current | This object represents the version string of the boot loader release. |
| 1.3.6.1.4.1.4346.11.11.11.1.7 | ScalarflWorkFWInfoBootState | read-only | current | This object represent the current status string of the boot loader release. |
| 1.3.6.1.4.1.4346.11.11.11.1.8 | ScalarflWorkFWInfoBootDate | read-only | current | This object represent the compiling date string of the boot loader release. |
| 1.3.6.1.4.1.4346.11.11.11.1.9 | ScalarflWorkFWInfoBootTime | read-only | current | This object represent the compiling time string of the boot loader release. |
| 1.3.6.1.4.1.4346.11.11.11.1.11 | ScalarflWorkFWInfoOperStatus | read-only | current | This object indicates the operational state of the firmware. You get the state ok(2) if the device is in the normal operation mode 'running'. The state notOk(3… |
| 1.3.6.1.4.1.4346.11.11.11.1.12 | ScalarflWorkFWInfoHealthText | read-only | current | The health text object is a text string that provides information relevant to the operational state of the firmware. The firmware may use this string to provid… |
| 1.3.6.1.4.1.4346.11.11.11.1.13 | ScalarflWorkFWInfoDisplay | read-only | current | Output to the display at the point of time of the access to this object. |
| 1.3.6.1.4.1.4346.11.11.11.1.14 | NodeflWorkFWInfoEvent | |||
| 1.3.6.1.4.1.4346.11.11.11.1.14.1 | TableflWorkFWInfoEventTable | not-accessible | current | Table of Events. |
| 1.3.6.1.4.1.4346.11.11.11.1.14.1.1 | RowflWorkFWInfoEventEntry | not-accessible | current | Each entry in the table contains one host ip address for a trap destination. |
| 1.3.6.1.4.1.4346.11.11.11.1.14.1.1.1 | ColumnflWorkFWInfoEventIndex | read-only | current | This object contains a consecutive number between 1 and 400 for the event table entries. |
| 1.3.6.1.4.1.4346.11.11.11.1.14.1.1.2 | ColumnflWorkFWInfoEventCode | read-only | current | This object contains the event code assigned to every event. |
| 1.3.6.1.4.1.4346.11.11.11.1.14.1.1.3 | ColumnflWorkFWInfoEventDescription | read-only | current | This object contains a description string which explains the kind of event. |
| 1.3.6.1.4.1.4346.11.11.11.1.14.1.1.4 | ColumnflWorkFWInfoEventSystemUpTime | read-only | current | This object contains the system up time at which an event occured. |
| 1.3.6.1.4.1.4346.11.11.11.1.14.1.1.5 | ColumnflWorkFWInfoEventSntpTime | read-only | current | This object contains the UTC time at which an event occured. |
| 1.3.6.1.4.1.4346.11.11.11.1.14.1.1.6 | ColumnflWorkFWInfoEventSntpDate | read-only | current | This object contains the UTC date at which an event occured. |
| 1.3.6.1.4.1.4346.11.11.11.1.14.1.1.7 | ColumnflWorkFWInfoEventSntpSeconds | read-only | current | This object contains the UTC seconds used in NTP at which an event occured. |
| 1.3.6.1.4.1.4346.11.11.11.1.14.1.1.8 | ColumnflWorkFWInfoEventSntpFractionalSeconds | read-only | current | This object contains the UTC fractional seconds used in NTP at which an event occured. |
| 1.3.6.1.4.1.4346.11.11.11.1.14.2 | ScalarflWorkFWInfoEventTableClear | read-write | current | Setting this object to clear(2) causes a deletion of all objects in the event table. Setting this object to noClear(1) has no effect. The firmware will always … |
| 1.3.6.1.4.1.4346.11.11.11.2 | NodeflWorkFWCtrl | |||
| 1.3.6.1.4.1.4346.11.11.11.2.1 | NodeflWorkFWCtrlBasic | |||
| 1.3.6.1.4.1.4346.11.11.11.2.1.1 | ScalarflWorkFWCtrlReset | read-write | current | Setting this object to reset(2) causes a hardware reset of the device and all components. Setting this object to noReset(1) has no effect. The firmware will al… |
| 1.3.6.1.4.1.4346.11.11.11.2.1.2 | ScalarflWorkFWCtrlTrapDestCapacity | read-only | obsolete | This object hold the number of trap destination entries (host ip addresses) contained in the table flWorkFWCtrlTrapDestTable. |
| 1.3.6.1.4.1.4346.11.11.11.2.1.3 | ScalarflWorkFWCtrlWatchdog | read-write | current | Setting this object to enable(2) activates the watchdog during the next restart. This Watchdog monitors the reliable operation of the device. If the reliable o… |
| 1.3.6.1.4.1.4346.11.11.11.2.1.6 | ScalarflWorkFWCtrlHTTP | read-write | deprecated | Setting this object to disable(1) disables the web server of the device. For some products, the modified adjustments become effective after a restart of the de… |
| 1.3.6.1.4.1.4346.11.11.11.2.1.7 | ScalarflWorkFWCtrlTelnet | read-write | deprecated | Setting this object to disable(1) disables the telnet server of the device. For some products, the modified adjustments become effective after a restart of the… |
| 1.3.6.1.4.1.4346.11.11.11.2.1.8 | ScalarflWorkFWCtrlWebPageRefresh | read-write | current | The refresh interval in seconds for refreshing the web pages by the web browser. The granularity of this timer is 1 second. A value of zero disables the refres… |
| 1.3.6.1.4.1.4346.11.11.11.2.1.9 | ScalarflWorkFWCtrlSNMP | read-write | deprecated | Setting this object to disable(1) disables the snmp agent of the device. For some products, the modified adjustments become effective after a restart of the de… |
| 1.3.6.1.4.1.4346.11.11.11.2.1.10 | ScalarflWorkFWCtrlOperatingMode | read-write | current | This object allows the user to preselect a configuration for a special application. Please read the manual for additional information about the various setting… |
| 1.3.6.1.4.1.4346.11.11.11.2.1.11 | ScalarflWorkFWCtrlIfCounters | read-write | current | When set this object to clear(2), the statistic counters of all ports will be cleared. Setting this object to noClear(1) has no effect. Reading this object you… |
| 1.3.6.1.4.1.4346.11.11.11.2.1.12 | ScalarflWorkFWCtrlHTTPSecure | read-write | deprecated | Setting this object enables or disables the HTTPS server on this device. |
| 1.3.6.1.4.1.4346.11.11.11.2.1.13 | ScalarflWorkFWCtrlSSH | read-write | deprecated | Setting this object enables or disables the SSH server on this device. |
| 1.3.6.1.4.1.4346.11.11.11.2.1.14 | ScalarflWorkFWCtrlSNMPv3 | read-write | deprecated | Setting this object enables or disables version 3 of of SNMP which is used for secure connection to the device. |
| 1.3.6.1.4.1.4346.11.11.11.2.1.15 | ScalarflWorkFwCtrlCpuOverloadStopForwarding | read-write | current | When set to stopForwarding(2) the device will stop forwarding packets if a CPU overload condition occurs which is shown by errorcode 89 in the display. If set … |
| 1.3.6.1.4.1.4346.11.11.11.2.1.16 | ScalarflWorkFWCtrlDisplayRights | read-write | current | Setting this object enables or disables configuration settings via display. |
| 1.3.6.1.4.1.4346.11.11.11.2.1.17 | ScalarflWorkFWCtrlDisplayContrast | read-write | current | Set or get the current display contrast of the device display |
| 1.3.6.1.4.1.4346.11.11.11.2.1.18 | ScalarflWorkFWCtrlCLIIPSock | read-write | current | Setting this object enables or disables CLI IP-Socket Interface. |
| 1.3.6.1.4.1.4346.11.11.11.2.1.20 | ScalarflWorkFWCtrlLEDsOff | read-write | current | Enable or disable LEDs Off Mode on the Device. In LEDs Off Mode no LEDs will be active. |
| 1.3.6.1.4.1.4346.11.11.11.2.1.21 | ScalarflWorkFWCtrlWebServerMode | read-write | current | Control the mode of the web server. The following modes exist: DISABLE (Deactivates the web interface!) HTTP (standard, unsecured), HTTPS (secured, use https:/… |
| 1.3.6.1.4.1.4346.11.11.11.2.1.22 | ScalarflWorkFWCtrlSnmpAgentMode | read-write | current | Control the mode of the snmp agent. The following modes exist: DISABLE (Deactivates the snmp agent!) SNMPv2c (unsecured) SNMPv3 (secured, Authentication protoc… |
| 1.3.6.1.4.1.4346.11.11.11.2.1.23 | ScalarflWorkFWCtrlCliServiceMode | read-write | current | Control the mode of the snmp agent. The following modes exist: DISABLE (Deactivates the cli service!) TELNET (unsecured) SSH (secured) |
| 1.3.6.1.4.1.4346.11.11.11.2.1.24 | ScalarflWorkFWCtrlPersistentEventLoggingMode | read-write | current | Enable or disable persistent storage of event table entries |
| 1.3.6.1.4.1.4346.11.11.11.2.1.25 | ScalarflWorkFWCtrlSmartModeGblEnable | read-write | current | Enable or disable the smart mode functionality (mode button) |
| 1.3.6.1.4.1.4346.11.11.11.2.1.26 | ScalarflWorkFWCtrlHostnameResolutionEnable | read-write | current | Enable or disable the hostname resolution via mDNS and LLMNR |
| 1.3.6.1.4.1.4346.11.11.11.2.1.27 | ScalarflWorkFWCtrlHostname | read-write | current | The device will always return his hostname. At the delivery time to the customer a default value is already present. The default value consists of the device t… |
| 1.3.6.1.4.1.4346.11.11.11.2.1.28 | ScalarflWorkFWCtrlSdCardGblEnable | read-write | current | Enable or disable the SD card slot. |
| 1.3.6.1.4.1.4346.11.11.11.2.1.29 | ScalarflWorkFWCtrlWebLoginRequired | read-write | current | Enable or disable a required user login for the web server. |
| 1.3.6.1.4.1.4346.11.11.11.2.1.30 | ScalarflWorkFWCtrlTopologyBasedIpPort | read-write | current | The port on which topology based ip is activated. Setting the port to zero disables the feature. |
| 1.3.6.1.4.1.4346.11.11.11.2.1.31 | ScalarflWorkFWCtrlTopologyBasedIpState | read-only | current | The state of the topology based ip feature (disabled/client/root). |
| 1.3.6.1.4.1.4346.11.11.11.2.2 | NodeflWorkFWCtrlTrapDest | |||
| 1.3.6.1.4.1.4346.11.11.11.2.2.1 | TableflWorkFWCtrlTrapDestTable | not-accessible | current | Table of host ip addresses for available trap destinations. |
| 1.3.6.1.4.1.4346.11.11.11.2.2.1.1 | RowflWorkFWCtrlTrapDestEntry | not-accessible | current | Each entry in the table contains one host ip address for a trap destination. |
| 1.3.6.1.4.1.4346.11.11.11.2.2.1.1.1 | ColumnflWorkFWCtrlTrapDestIndex | read-only | current | This object identifies the trap destination over host ip address which this entry named. This value is never greater then flWorkFWCtrlTrapDestCapacity. |
| 1.3.6.1.4.1.4346.11.11.11.2.2.1.1.2 | ColumnflWorkFWCtrlTrapDestIPAddr | read-write | current | This ip address named a trap destination host who is using to receive trap events. Values in the form 0.0.0.0 are non valid ip addresses and will be understand… |
| 1.3.6.1.4.1.4346.11.11.11.2.2.1.1.4 | ColumnflWorkFWCtrlTrapDestName | read-write | current | Hostname of a trap destination host who is used to receive trap events. The maximum size of the string is 255 characters. |
| 1.3.6.1.4.1.4346.11.11.11.2.2.2 | ScalarflWorkFWCtrlTrapDestCapacityMax | read-only | current | This object hold the maximal number of trap destination entries (host ip addresses) contained in the table flWorkFWCtrlTrapDestTable. |
| 1.3.6.1.4.1.4346.11.11.11.2.2.3 | ScalarflWorkFWCtrlTrapDestEnable | read-write | current | Determines whether this device will transmit traps to SNMP management stations. If this object is set to disable(1) no traps will be sent. |
| 1.3.6.1.4.1.4346.11.11.11.2.2.4 | ScalarflWorkFWCtrlTrapLink | read-write | current | Setting this object to phyPortNumber(1) the link up and link down traps contain as binding 'ifIndex' the physikal port number. The binding is set to the interf… |
| 1.3.6.1.4.1.4346.11.11.11.2.2.5 | ScalarflWorkFWCtrlTrapConnectionTest | read-write | current | Setting this object to sendTrap(2) the snmp agent sends the trap trapManagerConnection. Setting this object to noTrap(1) has no effect. |
| 1.3.6.1.4.1.4346.11.11.11.2.2.10 | TableflWorkFWCtrlTrapEnableTable | not-accessible | current | Table to enable/disable the different kind of traps. |
| 1.3.6.1.4.1.4346.11.11.11.2.2.10.1 | RowflWorkFWCtrlTrapEnableEntry | not-accessible | current | Each entry in the table contains information for one trap. |
| 1.3.6.1.4.1.4346.11.11.11.2.2.10.1.1 | ColumnflWorkFWCtrlTrapEnableIndex | read-only | current | This object identifies the trap by the last part of the trap oid (see list of traps in group flWorkTrapsDelemeter). |
| 1.3.6.1.4.1.4346.11.11.11.2.2.10.1.2 | ColumnflWorkFWCtrlTrapEnableOid | read-only | current | OID of the trap (see list of traps in group flWorkTrapsDelemeter). |
| 1.3.6.1.4.1.4346.11.11.11.2.2.10.1.3 | ColumnflWorkFWCtrlTrapEnableName | read-only | current | The name of this trap to identify the trap. |
| 1.3.6.1.4.1.4346.11.11.11.2.2.10.1.4 | ColumnflWorkFWCtrlTrapEnableStatus | read-write | current | Status of sending this kind of trap. Each trap can be disabled separately when the sending traps is enabled for the snmp agent (see object flWorkFWCtrlTrapDest… |
| 1.3.6.1.4.1.4346.11.11.11.2.3 | NodeflWorkFWCtrlPasswd | |||
| 1.3.6.1.4.1.4346.11.11.11.2.3.1 | ScalarflWorkFWCtrlPasswdSet | read-write | current | This write only object changes the current password to a given new password. The character mask is defined as below: 1.) The password length is min. 8 and max.… |
| 1.3.6.1.4.1.4346.11.11.11.2.3.2 | ScalarflWorkFWCtrlPasswdSuccess | read-only | current | The firmware will always return the last access result to the object flWorkFWCtrlPasswdSet. In case of new system startup without any try of manipulations onto… |
| 1.3.6.1.4.1.4346.11.11.11.2.3.3 | ScalarflWorkFWCtrlLoginExpire | read-write | current | When the user configures the device using the web interface it is necessary to enter the password. After the first authentication the user is registered for th… |
| 1.3.6.1.4.1.4346.11.11.11.2.4 | NodeflWorkFWCtrlUpdate | |||
| 1.3.6.1.4.1.4346.11.11.11.2.4.2 | ScalarflWorkFWCtrlTftpIPAddr | read-write | current | Write to this object sets the IP address for the TFTP server needed by the update process. |
| 1.3.6.1.4.1.4346.11.11.11.2.4.3 | ScalarflWorkFWCtrlTftpFile | read-write | current | Write to this object sets the file name on the TFTP server needed by the update process. |
| 1.3.6.1.4.1.4346.11.11.11.2.4.4 | ScalarflWorkFWCtrlUpdateStatus | read-only | current | Information about the update process before the last restart of the device. |
| 1.3.6.1.4.1.4346.11.11.11.2.4.5 | ScalarflWorkFWCtrlUpdateExecute | read-write | current | Setting this object to startFwUpdate(2) causes a tftp download to update the current firmware. The object flWorkFWCtrlRunningUpdate gives additional informatio… |
| 1.3.6.1.4.1.4346.11.11.11.2.4.6 | ScalarflWorkFWCtrlRunningUpdate | read-only | current | Provides status on the running tftp file download progress. |
| 1.3.6.1.4.1.4346.11.11.11.2.4.7 | ScalarflWorkFWCtrlAutoUpdate | read-write | current | Setting this object to startAutoFwUpdate(2) causes a tftp download to update the current firmware. When the update will be finished, the device initiates a res… |
| 1.3.6.1.4.1.4346.11.11.11.2.4.8 | ScalarflWorkFWCtrlTftpImage | read-write | current | This object sets the image that should be updated. If there are 2 different images available on the device, the one which should be updated (overwritten) is sp… |
| 1.3.6.1.4.1.4346.11.11.11.2.5 | NodeflWorkFWCtrlConf | |||
| 1.3.6.1.4.1.4346.11.11.11.2.5.1 | ScalarflWorkFWCtrlConfStatus | read-only | current | A GET of this object will return the status of the current device configuration. The status configOK(1) shows that the current configuration is equal to the sa… |
| 1.3.6.1.4.1.4346.11.11.11.2.5.2 | ScalarflWorkFWCtrlConfSave | read-write | current | When set to save(2), all non volatile configuration parameters are saved to NVM (Nonvolatile Memory). Setting this object to noSave(1) has no effect. The firmw… |
| 1.3.6.1.4.1.4346.11.11.11.2.5.3 | ScalarflWorkFWCtrlDefaultUponDelivery | read-write | current | Setting this object to default upon delivery(2) brings the device into the default upon delivery. For example: - the IP addresses is set on 0.0.0.0, - the pass… |
| 1.3.6.1.4.1.4346.11.11.11.2.5.4 | ScalarflWorkFWCtrlConfName | read-write | current | This object informs about the descriptive name of the non volatile configuration. A set operation to this object sets the name of the stored configuration. |
| 1.3.6.1.4.1.4346.11.11.11.2.5.5 | ScalarflWorkFWCtrlConfSource | read-only | current | This object informs about the storage location from which the device reads the configuration at startup. |
| 1.3.6.1.4.1.4346.11.11.11.2.5.6 | ScalarflWorkFWCtrlLoginSessions | read-write | current | close all telnet sessions |
| 1.3.6.1.4.1.4346.11.11.11.2.5.7 | ScalarflWorkFWCtrlPasswords | read-write | current | reset passwords |
| 1.3.6.1.4.1.4346.11.11.11.2.5.8 | ScalarflWorkFWCtrlSwitchStats | read-write | current | clear all switch statistics |
| 1.3.6.1.4.1.4346.11.11.11.2.5.9 | ScalarflWorkFWCtrlTrapLog | read-write | current | clear trap log |
| 1.3.6.1.4.1.4346.11.11.11.2.5.10 | NodeflWorkFWConfig | |||
| 1.3.6.1.4.1.4346.11.11.11.2.5.10.2 | ScalarflWorkFWConfigTftpIPAddr | read-write | current | Write to this object sets the IP address for the TFTP server needed by the file transfer process. |
| 1.3.6.1.4.1.4346.11.11.11.2.5.10.3 | ScalarflWorkFWConfigTftpFile | read-write | current | Writing to this object sets the file name for the file transfer process. |
| 1.3.6.1.4.1.4346.11.11.11.2.5.10.4 | ScalarflWorkFWConfigStatus | read-only | current | Information about the last file transfer process. |
| 1.3.6.1.4.1.4346.11.11.11.2.5.10.5 | ScalarflWorkFWConfigExecute | read-write | current | Setting this object to hostToDevice(2) causes a download of the configuration file from a TFTP server (host) to this device. Setting this object to deviceToHos… |
| 1.3.6.1.4.1.4346.11.11.11.2.5.10.6 | ScalarflWorkFWRunningConfig | read-only | current | Provides status on the running tftp configuration file transfer progress. |
| 1.3.6.1.4.1.4346.11.11.11.2.5.11 | NodeflWorkFWCtrlConfigPluggable | |||
| 1.3.6.1.4.1.4346.11.11.11.2.5.11.1 | ScalarflWorkFWCtrlConfPluggableStatus | read-only | current | This object informs about the status of the pluggable memory module. |
| 1.3.6.1.4.1.4346.11.11.11.2.5.11.2 | ScalarflWorkFWCtrlConfPluggableClear | read-write | current | When set this object to clear(2), the memory module will be cleared. A switch with an empty memory module loads the configuration out of the non volatile memor… |
| 1.3.6.1.4.1.4346.11.11.11.2.5.11.3 | ScalarflWorkFWCtrlConfPluggableCompare | read-write | current | Setting this object to compare(2) starts a comparison between the configuration in module module and the non volatile memory of head station. Setting this obje… |
| 1.3.6.1.4.1.4346.11.11.11.2.5.11.4 | ScalarflWorkFWCtrlConfPluggableCompareStatus | read-only | current | This object informs about the result of comparing the configuration in the memory module and in the non volatile memory of the head station. You get the value … |
| 1.3.6.1.4.1.4346.11.11.11.2.5.11.5 | NodeflWorkFWCtrlConfigMemInfo | |||
| 1.3.6.1.4.1.4346.11.11.11.2.5.11.5.1 | ScalarflWorkFWCtrlConfigMemConfName | read-only | current | This object informs about the descriptive name of the configuration stored in the memory module. The object will be set to the current configuration name each … |
| 1.3.6.1.4.1.4346.11.11.11.2.5.11.5.2 | ScalarflWorkFWCtrlConfigMemFwVersion | read-only | current | This object informs about the firmware version with which the configuration was stored. |
| 1.3.6.1.4.1.4346.11.11.11.2.5.11.5.3 | ScalarflWorkFWCtrlConfigMemIpAddress | read-only | current | IP address of the device writing the configuration file into the memory module. |
| 1.3.6.1.4.1.4346.11.11.11.2.5.11.5.4 | ScalarflWorkFWCtrlConfigMemMrmFunctionality | read-only | current | Indicates if the plugable memory module carries MRP master functionality that can be used on the system. |
| 1.3.6.1.4.1.4346.11.11.11.2.5.11.5.5 | ScalarflWorkFWCtrlConfigMemSerialNumber | read-only | current | This is the one-to-one serial number of the plugable memory module. |
| 1.3.6.1.4.1.4346.11.11.11.2.5.11.5.6 | ScalarflWorkFWCtrlConfigMemManufacturingId | read-only | current | This is the manufacturing id of the plugable memory module. |
| 1.3.6.1.4.1.4346.11.11.11.2.5.11.5.7 | ScalarflWorkFWCtrlConfigMemType | read-only | current | Indicates the type of configuration memory beeing used. |
| 1.3.6.1.4.1.4346.11.11.11.2.5.11.5.8 | ScalarflWorkFWCtrlConfigMemL3License | read-only | current | Indicates if the plugable memory module carries an Layer 3 license that will enable this functionality on the system. |
| 1.3.6.1.4.1.4346.11.11.11.2.6 | NodeflWorkFWCtrlSerial | |||
| 1.3.6.1.4.1.4346.11.11.11.2.6.1 | ScalarflWorkFWCtrlSerialBaud | read-only | current | The serial port baud rate. |
| 1.3.6.1.4.1.4346.11.11.11.2.6.2 | ScalarflWorkFWCtrlSerialDataBits | read-only | current | The serial port number of data bits. |
| 1.3.6.1.4.1.4346.11.11.11.2.6.3 | ScalarflWorkFWCtrlSerialStopBits | read-only | current | The serial port number of stop bits. |
| 1.3.6.1.4.1.4346.11.11.11.2.6.4 | ScalarflWorkFWCtrlSerialParity | read-only | current | The serial port parity. |
| 1.3.6.1.4.1.4346.11.11.11.2.6.5 | ScalarflWorkFWCtrlSerialFlowControl | read-only | current | The serial port flow control. |
| 1.3.6.1.4.1.4346.11.11.11.2.6.6 | ScalarflWorkFWCtrlSerialTimeout | read-only | current | flWorkFWCtrlSerialTimeout specifies the maximum connect time(in minutes) without console activity. A value of 0 indicates that a console can be connected indef… |
| 1.3.6.1.4.1.4346.11.11.11.2.7 | NodeflWorkFWCtrlAlarmContact | |||
| 1.3.6.1.4.1.4346.11.11.11.2.7.1 | NodeflWorkFWCtrlAlarmContactEvents | |||
| 1.3.6.1.4.1.4346.11.11.11.2.7.1.1 | ScalarflWorkFWCtrlAlarmContactEventPowerSupply | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if only one power supply is present. |
| 1.3.6.1.4.1.4346.11.11.11.2.7.1.2 | ScalarflWorkFWCtrlAlarmContactEventLinkState | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if at least one port with an activated link monitoring (see object flWorkNetPortLinkMoni… |
| 1.3.6.1.4.1.4346.11.11.11.2.7.1.3 | ScalarflWorkFWCtrlAlarmContactEventSecurityPortBlocked | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if the device receives at one port a not allowed mac address and the port security based… |
| 1.3.6.1.4.1.4346.11.11.11.2.7.1.4 | ScalarflWorkFWCtrlAlarmContactEventPoeFaultDetected | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if the device detects a fault on any Power over Ethernet enabled port that has the objec… |
| 1.3.6.1.4.1.4346.11.11.11.2.7.1.5 | ScalarflWorkFWCtrlAlarmContactEventMrpRingFailure | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if an activated MRP Manager detects a ring failure. |
| 1.3.6.1.4.1.4346.11.11.11.2.7.1.6 | ScalarflWorkFWCtrlAlarmContactEventConfigMemFail | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if a mem plug is missing or the configuration on it is invalid. |
| 1.3.6.1.4.1.4346.11.11.11.2.7.1.7 | ScalarflWorkFWCtrlAlarmContactEventPoFScrjTransCritical | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if any POF SCRJ transceiver in the system has reached a critical low rx power level. See… |
| 1.3.6.1.4.1.4346.11.11.11.2.7.1.8 | ScalarflWorkFWCtrlAlarmContactEventDlrRingFailure | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if an activated DLR supervisor detects a ring failure. |
| 1.3.6.1.4.1.4346.11.11.11.2.7.2 | ScalarflWorkFWCtrlAlarmContactEnable | read-write | current | Setting this object to enable(2) activates the monitoring of the events which are listed in the group flWorkFWCtrlAlarmContactEvents. |
| 1.3.6.1.4.1.4346.11.11.11.2.7.3 | ScalarflWorkFWCtrlAlarmContactStatus | read-only | current | The object flWorkFWCtrlAlarmContactStatus presents information about the status of the alarm contact. |
| 1.3.6.1.4.1.4346.11.11.11.2.7.4 | ScalarflWorkFWCtrlAlarmContactReason | read-only | current | The reason the alarm contact has been activated. |
| 1.3.6.1.4.1.4346.11.11.11.2.7.11 | NodeflWorkFWCtrlAlarmContact2Events | |||
| 1.3.6.1.4.1.4346.11.11.11.2.7.11.1 | ScalarflWorkFWCtrlAlarmContact2EventPowerSupply | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if only one power supply is present. |
| 1.3.6.1.4.1.4346.11.11.11.2.7.11.2 | ScalarflWorkFWCtrlAlarmContact2EventLinkState | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if at least one port with an activated link monitoring (see object flWorkNetPortLinkMoni… |
| 1.3.6.1.4.1.4346.11.11.11.2.7.11.3 | ScalarflWorkFWCtrlAlarmContact2EventSecurityPortBlocked | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if the device receives at one port a not allowed mac address and the port security based… |
| 1.3.6.1.4.1.4346.11.11.11.2.7.11.4 | ScalarflWorkFWCtrlAlarmContact2EventPoeFaultDetected | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if the device detects a fault on any Power over Ethernet enabled port that has the objec… |
| 1.3.6.1.4.1.4346.11.11.11.2.7.11.5 | ScalarflWorkFWCtrlAlarmContact2EventMrpRingFailure | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if an activated MRP Manager detects a ring failure. |
| 1.3.6.1.4.1.4346.11.11.11.2.7.11.6 | ScalarflWorkFWCtrlAlarmContact2EventConfigMemFail | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if a mem plug is missing or the configuration on it is invalid. |
| 1.3.6.1.4.1.4346.11.11.11.2.7.11.7 | ScalarflWorkFWCtrlAlarmContact2EventPoFScrjTransCritical | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if any POF SCRJ transceiver in the system has reached a critical low rx power level. See… |
| 1.3.6.1.4.1.4346.11.11.11.2.7.11.8 | ScalarflWorkFWCtrlAlarmContact2EventDlrRingFailure | read-write | current | Setting this object to enable(2) leads to releasing the alarm contact, if an activated DLR supervisor detects a ring failure. |
| 1.3.6.1.4.1.4346.11.11.11.2.7.12 | ScalarflWorkFWCtrlAlarmContact2Enable | read-write | current | Setting this object to enable(2) activates the monitoring of the events which are listed in the group flWorkFWCtrlAlarmContactEvents. |
| 1.3.6.1.4.1.4346.11.11.11.2.7.13 | ScalarflWorkFWCtrlAlarmContact2Status | read-only | current | The object flWorkFWCtrlAlarmContactStatus presents information about the status of the alarm contact. |
| 1.3.6.1.4.1.4346.11.11.11.2.7.14 | ScalarflWorkFWCtrlAlarmContact2Reason | read-only | current | The reason the alarm contact has been activated. |
| 1.3.6.1.4.1.4346.11.11.11.2.8 | NodeflWorkFWCtrlSecurity | |||
| 1.3.6.1.4.1.4346.11.11.11.2.8.1 | NodeflWorkFWCtrlSecurityAccess | |||
| 1.3.6.1.4.1.4346.11.11.11.2.8.1.1 | TableflWorkFWCtrlSecurityAccessTable | not-accessible | current | Table of client ip addresses for the access control for the user interfaces of the device based on ip addresses. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.1.1.1 | RowflWorkFWCtrlSecurityAccessEntry | not-accessible | current | An entry in the table contains one client ip address of the access control list. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.1.1.1.1 | ColumnflWorkFWCtrlSecurityAccessIndex | read-only | current | This object identifies the entry in the access control list. This value is never greater then flWorkFWCtrlSecurityAccessTableCapacityMax. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.1.1.1.2 | ColumnflWorkFWCtrlSecurityAccessAddr | read-write | current | This ip address named a client who have access rights to this device. Values in the form 0.0.0.0 are non valid ip addresses and will be understanding as an ina… |
| 1.3.6.1.4.1.4346.11.11.11.2.8.1.1.1.3 | ColumnflWorkFWCtrlSecurityAccessDescr | read-write | current | A description of this client. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.1.1.1.4 | ColumnflWorkFWCtrlSecurityAccessRight | read-write | current | Access rights of the client named by the ip address (see object flWorkFWCtrlSecurityAccessAddr). |
| 1.3.6.1.4.1.4346.11.11.11.2.8.1.2 | ScalarflWorkFWCtrlSecurityAccessTableCapacityMax | read-only | current | Maximal number of entries in the security table for access control to the management interfaces. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.1.3 | ScalarflWorkFWCtrlSecurityAccessEnable | read-write | current | Status of the access control to management interfaces based on client ip addresses. Setting the object to disable(1) disables the access control to management … |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2 | NodeflWorkFWCtrlSecurityPort | |||
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.1 | TableflWorkFWCtrlSecurityPortTable | not-accessible | current | Table of port parameters to be configured for port security based on source addresses. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.1.1 | RowflWorkFWCtrlSecurityPortEntry | not-accessible | current | An entry in the table contains information of one port of the device. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.1.1.1 | ColumnflWorkFWCtrlSecurityPortIndex | read-only | current | This object identifies the entry in the port list. This value is never greater then flWorkFWCtrlSecurityPortTableCapacityMax. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.1.1.2 | ColumnflWorkFWCtrlSecurityPortLastMacAddr | read-only | current | This mac address is the last source mac address the device received at the port. The corresponding Vlan Id is added to the end. + |Mac Address |Vlan Id| + |xx:… |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.1.1.3 | ColumnflWorkFWCtrlSecurityPortMode | read-write | current | Get back or set the current security mode of the port. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.1.1.4 | ColumnflWorkFWCtrlSecurityPortState | read-write | current | Get back the security operational state of the port. The state blocking(2) indicates that this port has received a not allowed mac address and is blocked now. … |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.1.1.5 | ColumnflWorkFWCtrlSecurityPortIllegalAddrCounter | read-only | current | Number of received illegal mac addresses at the port. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.2 | TableflWorkFWCtrlSecurityPortMacTable | not-accessible | current | Table of allowed mac addresses for each port. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.2.1 | RowflWorkFWCtrlSecurityPortMacEntry | not-accessible | current | An entry in the table contains information about one allowed source mac address. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.2.1.1 | ColumnflWorkFWCtrlSecurityPortMacIndex | read-only | current | This object identifies the number of the for one port. This value is never greater then flWorkFWCtrlSecurityPortMacTableCapacityMax. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.2.1.2 | ColumnflWorkFWCtrlSecurityPortMacAddr | read-write | current | A allowed mac address at the port. Values in the form 00:00:00:00:00:00 are non valid addresses and will be understanding as an inactive entries. Please take n… |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.2.1.3 | ColumnflWorkFWCtrlSecurityPortMacDescr | read-write | current | A description of the allowed mac address. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.2.1.4 | ColumnflWorkFWCtrlSecurityPortMacVlanID | read-write | current | This object is only relevant for vlan tagging mode, to setup the vlan ID for this entry. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.2.1.5 | ColumnflWorkFWCtrlSecurityPortMacDelete | read-write | current | When set this object to deleteMAC(2), the corresponding MAC entry will be deleted. Setting this object to keepMAC(1) has no effect. Reading this object you get… |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.3 | ScalarflWorkFWCtrlSecurityPortTableCapacityMax | read-only | current | Maximal number of entries in the security port table. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.4 | ScalarflWorkFWCtrlSecurityPortMacTableCapacityMax | read-only | current | Maximal number of allowed mac addresses for each port. The maximal number of the entries in the flWorkFWCtrlSecurityPortMacTable is the result of the multiplic… |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.5 | ScalarflWorkFWCtrlSecurityPortEnable | read-write | current | Status of the access control to the network based on destination mac addresses received by the device in ethernet packets. Setting the object to disable(1) dis… |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.6 | ScalarflWorkFWCtrlSecurityPortIllegalAddrCounterClear | read-write | current | Setting this object to clear(2) sets all counter flWorkFWCtrlSecurityPortIllegalAddrCounter to zero. Setting this object to noClear(1) has no effect. Reading t… |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.7 | TableflWorkFWCtrlSecurityPortIpFilterTable | not-accessible | current | Table of allowed Ip addresses for each port. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.7.1 | RowflWorkFWCtrlSecurityPortIpFilterEntry | not-accessible | current | An entry in the table contains information about one allowed destination Ip address. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.7.1.1 | ColumnflWorkFWCtrlSecurityPortIpFilterIndex | read-only | current | This object identifies the number of the entry index for one port. This value is never greater then flWorkFWCtrlSecurityPortIpFilterTableCapacityMax. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.7.1.2 | ColumnflWorkFWCtrlSecurityPortIpFilterAddr | read-write | current | An allowed destination Ip address (whitelist) at the port in the form 0.0.0.0 |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.7.1.3 | ColumnflWorkFWCtrlSecurityPortIpFilterDescr | read-write | current | A description of the allowed Ip address. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.7.1.4 | ColumnflWorkFWCtrlSecurityPortIpFilterPort | read-write | current | The combination of destination IP address from flWorkFWCtrlSecurityPortIpFilterAddr in combination with the destination Port (TCP/UDP Portnumber) forms a white… |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.8 | ScalarflWorkFWCtrlSecurityPortIpFilterTableCapacityMax | read-only | current | Maximal number of allowed Ip addresses for each port. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.2.9 | ScalarflWorkFWCtrlSecurityMAConMultiplePorts | read-write | current | |
| 1.3.6.1.4.1.4346.11.11.11.2.8.3 | NodeflWorkFWCtrlSecurityDot1x | |||
| 1.3.6.1.4.1.4346.11.11.11.2.8.3.1 | TableflWorkFWCtrlSecurityDot1xPortTable | not-accessible | current | Table of guest Vlan Ids in 802.1x configuration for each port. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.3.1.1 | RowflWorkFWCtrlSecurityDot1xPortEntry | not-accessible | current | An entry in the table contains information about guest Vlan Ids and reauthentication time. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.3.1.1.1 | ColumnflWorkFWCtrlSecurityDot1xGuestVlanId | read-write | current | This object sets the configurable guest vlan id for the current port. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.3.1.1.2 | ColumnflWorkFWCtrlSecurityDot1xAssignTimeout | read-write | current | The value, in seconds, of the guestVlanPeriod constant currently in use for Guest Vlan Assignment for the interface . |
| 1.3.6.1.4.1.4346.11.11.11.2.8.3.2 | ScalarflWorkFWCtrlSecurityDot1xVlanAssign | read-write | current | When this object is enabled the authentication server is able to assign the user to a specicified VLAN. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.3.3 | TableflWorkFWCtrlSecurityRadiusAuthServTable | not-accessible | current | The table is listing RADIUS authentication servers with which the client shares a secret. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.3.3.1 | RowflWorkFWCtrlSecurityRadiusAuthServEntry | not-accessible | current | An entry in the table represents RADIUS authentication server with which the client shares a secret. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.3.3.1.1 | ColumnflWorkFWCtrlSecurityRadiusServIndex | read-only | current | A number uniquly identifying each RADIUS authentication server. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.3.3.1.2 | ColumnflWorkFWCtrlSecurityRadiusServAddress | read-write | current | IP address of the RADIUS authentication server. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.3.3.1.3 | ColumnflWorkFWCtrlSecurityRadiusServPort | read-write | current | UDP port the this server is using to accept requests from the client. |
| 1.3.6.1.4.1.4346.11.11.11.2.8.3.3.1.4 | ColumnflWorkFWCtrlSecurityRadiusServSharedSecret | read-write | current | This write only object changes the current shared secret to a given new shared secret. The character mask is defined as below: 1.) The shared secret length is … |
| 1.3.6.1.4.1.4346.11.11.11.2.8.3.3.1.5 | ColumnflWorkFWCtrlSecurityRadiusServName | read-write | current | Hostname of the RADIUS authentication server. The maximum size of the string is 255 characters. |
| 1.3.6.1.4.1.4346.11.11.11.2.9 | NodeflWorkFWCtrlProfinet | |||
| 1.3.6.1.4.1.4346.11.11.11.2.9.1 | NodeflWorkFWCtrlProfinetAlarm | |||
| 1.3.6.1.4.1.4346.11.11.11.2.9.1.1 | TableflWorkFWCtrlProfinetAlarmPortTable | not-accessible | current | Table of network ports and the related profinet alarm configuration. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.1.1.1 | RowflWorkFWCtrlProfinetAlarmPortEntry | not-accessible | current | An entry in the table containing information of one network port and his profinet alarm configuration. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.1.1.1.1 | ColumnflWorkFWCtrlProfinetAlarmPortIndex | read-only | current | This object identifies the port. This value is never greater then flWorkNetPortCapacity. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.1.1.1.2 | ColumnflWorkFWCtrlProfinetAlarmPortLinkMonitoring | read-write | current | In the operation mode Profinet a slot is able to send an alarm when the link status (see object flWorkNetPortLinkState) changes from connected(1) to notConnect… |
| 1.3.6.1.4.1.4346.11.11.11.2.9.1.1.1.3 | ColumnflWorkFWCtrlProfinetAlarmPortPofScrjDiag | read-write | current | In the operation mode Profinet a slot is able to send an alarm when the receive power of a POF SCRJ port reaches a the warning threshold or changes into a crit… |
| 1.3.6.1.4.1.4346.11.11.11.2.9.1.1.1.4 | ColumnflWorkFWCtrlProfinetAlarmPortSFPMissing | read-write | current | In the operation mode Profinet a slot is able to send an alarm when the SFP module is missing. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.1.10 | ScalarflWorkFWCtrlProfinetAlarmPowerSupply | read-write | current | In the operation mode Profinet the device is able to send an alarm when one redundant power supply has been lost. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.1.11 | ScalarflWorkFWCtrlProfinetAlarmModuleRemove | read-write | current | In the operation mode Profinet the device is able to send an alarm when one interface module has been removed. Only the FL SWITCH MM HS support this profinet a… |
| 1.3.6.1.4.1.4346.11.11.11.2.9.1.12 | ScalarflWorkFWCtrlProfinetAlarmPlugableMemory | read-write | current | In the operation mode Profinet the device is able to send an alarm when the plug mem or SD card is missing. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.1.20 | ScalarflWorkFWCtrlProfinetAlarmMRPRingFailure | read-write | current | In the operation mode Profinet the device is able to send an alarm when this device works as MRP Manager and has detected an failure in the ring. Only the devi… |
| 1.3.6.1.4.1.4346.11.11.11.2.9.2 | NodeflWorkFWCtrlProfinetStatus | |||
| 1.3.6.1.4.1.4346.11.11.11.2.9.2.1 | ScalarflWorkFWCtrlProfinetStatusActiveARs | read-only | current | The count of currentlcy active application relations. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.2.2 | ScalarflWorkFWCtrlProfinetStatusConReqCount | read-only | current | The count of connect requests received by this switch. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.2.3 | ScalarflWorkFWCtrlProfinetStatusDiagStatus | read-only | current | The current diagnosis status of the device. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.3 | NodeflWorkFWCtrlProfinetBoundarySettings | |||
| 1.3.6.1.4.1.4346.11.11.11.2.9.3.1 | TableflWorkFWCtrlProfinetBoundarySettingsTable | not-accessible | current | Table of profinet boundary settings. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.3.1.1 | RowflWorkFWCtrlProfinetBoundarySettingsEntry | not-accessible | current | An entry in the table, containing profinet boundary settings of one physical port. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.3.1.1.1 | ColumnflWorkFWCtrlProfinetBoundarySettingsPortIndex | read-only | current | Number of the physical port for which the profinet boundary settings are made. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.3.1.1.2 | ColumnflWorkFWCtrlProfinetBoundarySettingsDcpIdentify | read-write | current | Decide if DCP identify frames should be dropped (active(2)) or forwarded (notActive (1)) for the dedicated port. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.3.1.1.3 | ColumnflWorkFWCtrlProfinetBoundarySettingsDcpHello | read-write | current | Decide if DCP hello frames should be dropped (active(2)) or forwarded (notActive (1)) for the dedicated port. |
| 1.3.6.1.4.1.4346.11.11.11.2.9.3.1.1.4 | ColumnflWorkFWCtrlProfinetBoundarySettingsLLDP | read-write | current | Decide if receiving and transmitting lldp frames is disabled (active(2)) or enabled (notActive (1)) for the dedicated port. |
| 1.3.6.1.4.1.4346.11.11.11.2.10 | NodeflWorkFWCtrlMRP | |||
| 1.3.6.1.4.1.4346.11.11.11.2.10.1 | NodeflWorkFWCtrlMRPConfig | |||
| 1.3.6.1.4.1.4346.11.11.11.2.10.1.1 | TableflWorkFWCtrlMRPConfigDomainTable | not-accessible | current | Every entry into the table contains information about a MRP domain. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.1.1.1 | RowflWorkFWCtrlMRPConfigDomainEntry | not-accessible | current | An entry in the flWorkFWCtrlMRPConfigDomainTable. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.1.1.1.1 | ColumnflWorkFWCtrlMRPConfigDomainIdx | read-only | current | The Index of the entry |
| 1.3.6.1.4.1.4346.11.11.11.2.10.1.1.1.2 | ColumnflWorkFWCtrlMRPConfigDomainUdid | read-write | current | The IEC 61158-5-10 defines the structure of the UUID as a data type numberic identifier 1025 |
| 1.3.6.1.4.1.4346.11.11.11.2.10.1.1.1.3 | ColumnflWorkFWCtrlMRPConfigDomainName | read-write | current | A logical name for the domain to ease the management of MRP domains |
| 1.3.6.1.4.1.4346.11.11.11.2.10.1.1.1.4 | ColumnflWorkFWCtrlMRPConfigDomainRole | read-write | current | Control the MRP behaviour of the system per domain. Setting this value to disable(0) disables the MRP entity of this domain. If the value is set to client(1) t… |
| 1.3.6.1.4.1.4346.11.11.11.2.10.1.1.1.5 | ColumnflWorkFWCtrlMRPConfigDomainManagerPriority | read-write | current | The priority of this MRP entity. If the device is client only, the value of this object will be ignored by the MRP entity. Only the four most significant bits … |
| 1.3.6.1.4.1.4346.11.11.11.2.10.1.1.1.6 | ColumnflWorkFWCtrlMRPConfigDomainVlanID | read-write | current | VlanID used by MRP To activate the new settings, create(4) of flWorkFWCtrlMRPConfigDomainRole have to been used. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.1.1.1.7 | ColumnflWorkFWCtrlMRPConfigDomainRingPort1 | read-write | current | First Ring-Port Number of this device. To activate the new settings, create(4) of flWorkFWCtrlMRPConfigDomainRole have to been used. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.1.1.1.8 | ColumnflWorkFWCtrlMRPConfigDomainRingPort2 | read-write | current | Second Ring-Port Number of this device. To activate the new settings, create(4) of flWorkFWCtrlMRPConfigDomainRole have to been used. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.1.1.1.9 | ColumnflWorkFWCtrlMRPConfigDomainResetRoundTripDelays | read-write | current | Reset the max/min round trip delays |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2 | NodeflWorkFWCtrlMRPInfo | |||
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1 | TableflWorkFWCtrlMRPInfoDomainTable | not-accessible | current | This table contains variables to define an entry in the mrpInfo database. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1 | RowflWorkFWCtrlMRPInfoDomainEntry | not-accessible | current | An entry in flWorkFWCtrlMRPInfoDomainTable |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.1 | ColumnflWorkFWCtrlMRPInfoDomainIdx | read-only | current | Index number of the Mrp-Domain. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.2 | ColumnflWorkFWCtrlMRPInfoDomainUuid | read-only | current | The IEC 61158-5-10 defines the structure of the UUID as a data type numberic identifier 1025 |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.3 | ColumnflWorkFWCtrlMRPInfoDomainName | read-only | current | A logical name for the domain to ease the management of MRP domains |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.4 | ColumnflWorkFWCtrlMRPInfoDomainAdminRole | read-only | current | Control the MRP behaviour of the system per domain. Setting this value to disable(0) disables the MRP entity of this domain. If the value is set to client(1) t… |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.5 | ColumnflWorkFWCtrlMRPInfoDomainOperRole | read-only | current | The operational role of a MRP entity per domain. A value of disabled(0) signals that the entity doesn't work (whatever reason). A value of client(1) signals th… |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.6 | ColumnflWorkFWCtrlMRPInfoDomainManagerPriority | read-only | current | The priority of this MRP entity. If the device is client only, the value of this object will be ignored by the MRP entity. Only the four most significant bits … |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.7 | ColumnflWorkFWCtrlMRPInfoDomainRingPort1 | read-only | current | The ifIndex of the layer 2 interface which is used as ring port 1. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.8 | ColumnflWorkFWCtrlMRPInfoDomainRingPort1State | read-only | current | Status of the first Ring-Port. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.9 | ColumnflWorkFWCtrlMRPInfoDomainRingPort2 | read-only | current | The ifIndex of the layer 2 interface which is used as ring port 2. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.10 | ColumnflWorkFWCtrlMRPInfoDomainRingPort2State | read-only | current | Status of the second Ring-Port |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.11 | ColumnflWorkFWCtrlMRPInfoDomainState | read-only | current | Operational status of the MRP entity. disabled(0) - MRP switched off invalid(1) - value not valid because of client role ringClosed (2) - MRP ring redundancy o… |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.12 | ColumnflWorkFWCtrlMRPInfoDomainError | read-only | current | If the device couldn't switch to the desired administrative state (thus the value of 'pnoMRPDomainState' is not the expected one), this value provides the reas… |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.13 | ColumnflWorkFWCtrlMRPInfoDomainRingOpenCount | read-only | current | Manager-only: Counter for ring-state changes. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.14 | ColumnflWorkFWCtrlMRPInfoDomainLastRingOpenChange | read-only | current | Manager-only: Timeticks since last change of ring-state. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.15 | ColumnflWorkFWCtrlMRPInfoDomainRoundTripDelayMax | read-only | current | Manager-only: The max. Round-Trip-Delay (in microseconds) which was measured since startup. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.1.1.16 | ColumnflWorkFWCtrlMRPInfoDomainRoundTripDelayMin | read-only | current | Manager-only: The min. Round-Trip-Delay (in microseconds) which was measured since startup. |
| 1.3.6.1.4.1.4346.11.11.11.2.10.2.2 | ScalarflWorkFWCtrlMRPInfoDeviceBlockingSupport | read-only | current | Reads out the supported mechanism of the device. |
| 1.3.6.1.4.1.4346.11.11.11.2.11 | NodeflWorkFWCtrlTemp | |||
| 1.3.6.1.4.1.4346.11.11.11.2.11.1 | ScalarflWorkFWCtrlActualDeviceTemperature | read-only | current | Actual device temperature in Centigrade |
| 1.3.6.1.4.1.4346.11.11.11.2.11.2 | ScalarflWorkFWCtrlMinOperTemperature | read-only | current | Minimum allowed operational temperature of device in Centigrade |
| 1.3.6.1.4.1.4346.11.11.11.2.11.3 | ScalarflWorkFWCtrlMaxOperTemperature | read-only | current | Maximum allowed operational temperature of device in Centigrade |
| 1.3.6.1.4.1.4346.11.11.11.2.11.4 | ScalarflWorkFWCtrlUserTempWarningThreshold | read-write | current | A trap and display event will be generated if the actual device temperature exceeds this value (value is in Centigrade). |
| 1.3.6.1.4.1.4346.11.11.11.2.11.5 | ScalarflWorkFWCtrlTempShutdownPrevention | read-write | current | If this object is set to on(2) then the device will NOT shut down if device temperature goes above values that might cause serious damage to the device. NOTE: … |
| 1.3.6.1.4.1.4346.11.11.11.2.12 | NodeflWorkFWCtrlTelnetGroup | |||
| 1.3.6.1.4.1.4346.11.11.11.2.12.1 | ScalarflWorkFWCtrlTelnetLoginTimeout | read-write | current | Telnet login timeout (minutes) Config telnet timeout will set the telnet session timeout value. A session is active as long as the session has not remained idl… |
| 1.3.6.1.4.1.4346.11.11.11.2.12.2 | ScalarflWorkFWCtrlTelnetMaxSessions | read-write | current | Maximum number of Telnet Sessions Config telnet maxsessions is an integer value from 0 to 5 that specifies the maximum number of telnet sessions that can be es… |
| 1.3.6.1.4.1.4346.11.11.11.2.12.3 | ScalarflWorkFWCtrlTelnetAllowNewMode | read-write | current | Allow new telnet sessions (enable or disable) Config telnet disable means that no new Telnet sessions are to be established. Any already established session re… |
| 1.3.6.1.4.1.4346.11.11.11.2.13 | NodeflWorkFWCtrlImage | |||
| 1.3.6.1.4.1.4346.11.11.11.2.13.1 | ScalarflWorkFWCtrlImage1 | read-only | current | The image1 softwate version . |
| 1.3.6.1.4.1.4346.11.11.11.2.13.2 | ScalarflWorkFWCtrlImage2 | read-only | current | The image2 software version. |
| 1.3.6.1.4.1.4346.11.11.11.2.13.3 | ScalarflWorkFWCtrlActiveImage | read-only | current | The active image name. image1 or image2. |
| 1.3.6.1.4.1.4346.11.11.11.2.13.4 | ScalarflWorkFWCtrlNextActiveImage | read-write | current | The next active image name. This image is loaded when the system is reset user assigns either image1 or image2. |
| 1.3.6.1.4.1.4346.11.11.11.2.14 | NodeflWorkFWCtrlUserConfigGroup | |||
| 1.3.6.1.4.1.4346.11.11.11.2.14.1 | ScalarflWorkFWCtrlUserConfigCreate | read-write | current | Create a new user. When set with a non-empty string, a new user with that name will be created. This object will only return an empty string. This string is li… |
| 1.3.6.1.4.1.4346.11.11.11.2.14.2 | TableflWorkFWCtrlUserConfigTable | not-accessible | current | User Config Table |
| 1.3.6.1.4.1.4346.11.11.11.2.14.2.1 | RowflWorkFWCtrlUserConfigEntry | not-accessible | current | User Config Entry |
| 1.3.6.1.4.1.4346.11.11.11.2.14.2.1.1 | ColumnflWorkFWCtrlUserIndex | not-accessible | current | Agent User Config Index |
| 1.3.6.1.4.1.4346.11.11.11.2.14.2.1.2 | ColumnflWorkFWCtrlUserName | read-write | current | Agent User Name. This string is limited to alpha-numeric strings (including the '-' and '_' characters). |
| 1.3.6.1.4.1.4346.11.11.11.2.14.2.1.3 | ColumnflWorkFWCtrlUserPassword | read-write | current | Agent User Password This object will return an empty string even if a password is set. |
| 1.3.6.1.4.1.4346.11.11.11.2.14.2.1.4 | ColumnflWorkFWCtrlUserAccessMode | read-only | current | Agent User Access Mode |
| 1.3.6.1.4.1.4346.11.11.11.2.14.2.1.5 | ColumnflWorkFWCtrlUserStatus | read-write | current | Agent User Status. active(1) - This user account is active. destroy(6) - Set to this value to remove this user account. |
| 1.3.6.1.4.1.4346.11.11.11.2.14.2.1.6 | ColumnflWorkFWCtrlUserAuthenticationType | read-write | current | SNMPv3 User Authentication. The user passsword must be set to a string greater than or equal to 8 characters for this to be set to anything but none(1). none(1… |
| 1.3.6.1.4.1.4346.11.11.11.2.14.2.1.7 | ColumnflWorkFWCtrlUserEncryptionType | read-write | current | SNMPv3 User Encryption Can not be set to des(2) if agentUserAuthenticationType is set to none(1). none(1) - no encryption used des(2) - DES encryption used |
| 1.3.6.1.4.1.4346.11.11.11.2.14.2.1.8 | ColumnflWorkFWCtrlUserEncryptionPassword | read-write | current | SNMPv3 User Encryption Password This object will return an empty string even if a password is set. agentUserEncryptionType must be set to des(2) before this ob… |
| 1.3.6.1.4.1.4346.11.11.11.2.14.2.1.9 | ColumnflWorkFWCtrlUserLockoutStatus | read-only | current | Displays whether the user account is locked due to excessive failed login attempts. |
| 1.3.6.1.4.1.4346.11.11.11.2.14.2.1.10 | ColumnflWorkFWCtrlUserPasswordExpireTime | read-only | current | Date and time when the user's password expires (past or present). Only valid when password aging is enabled. |
| 1.3.6.1.4.1.4346.11.11.11.2.15 | NodeflWorkFWCtrlDigitalInput | |||
| 1.3.6.1.4.1.4346.11.11.11.2.15.1 | TableflWorkFWCtrlDigitalInputTable | not-accessible | current | Table to control digital inputs |
| 1.3.6.1.4.1.4346.11.11.11.2.15.1.1 | RowflWorkFWCtrlDigitalInputEntry | not-accessible | current | An entry in the table, containing information of regarding digital inputs |
| 1.3.6.1.4.1.4346.11.11.11.2.15.1.1.1 | ColumnflWorkFWCtrlDigitalInputIndex | read-only | current | This object identifies the digital input |
| 1.3.6.1.4.1.4346.11.11.11.2.15.1.1.2 | ColumnflWorkFWCtrlDigitalInputStatus | read-only | current | Get back the current state of a digital input. on(1) = signal present at input off(2) = signal not present at input unknown(3) = signal status is unkonwn |
| 1.3.6.1.4.1.4346.11.11.11.2.15.1.1.3 | ColumnflWorkFWCtrlDigitalInputEvents | read-only | current | Configuration of digital input events. none(0) = no event configured wlan(1) = if the digital input changes from low to high the wlan interface is enabled if t… |
| 1.3.6.1.4.1.4346.11.11.11.2.17 | NodeflWorkFWCtrlEnergy | |||
| 1.3.6.1.4.1.4346.11.11.11.2.17.1 | ScalarflWorkFWCtrlEnergyTest | read-write | current | This object identifies the Energy Saving mode |
| 1.3.6.1.4.1.4346.11.11.11.2.17.2 | TableflWorkEnergyPortTable | not-accessible | current | Table of network ports. |
| 1.3.6.1.4.1.4346.11.11.11.2.17.2.1 | RowflWorkEnergyPortEntry | not-accessible | current | An entry in the table, containing information about energy savig mode of one network port. |
| 1.3.6.1.4.1.4346.11.11.11.2.17.2.1.1 | ColumnflWorkEnergyPortIndex | read-only | current | This object identifies the port. This value is never greater then flWorkNetPortCapacity. |
| 1.3.6.1.4.1.4346.11.11.11.2.17.2.1.2 | ColumnflWorkEnergyPortModus | read-write | current | The modus of this port defined by the user: ignore(1) - Energy Saving settings are ignored for this port switch-off(2) - Port is switched off if global Energy … |
| 1.3.6.1.4.1.4346.11.11.11.2.18 | NodeflWorkFWCtrlDigitalOutput | |||
| 1.3.6.1.4.1.4346.11.11.11.2.18.1 | TableflWorkFWCtrlDigitalOutputTable | not-accessible | current | Table to control digital outputs |
| 1.3.6.1.4.1.4346.11.11.11.2.18.1.1 | RowflWorkFWCtrlDigitalOutputEntry | not-accessible | current | An entry in the table, containing information and settings regarding digital outputs |
| 1.3.6.1.4.1.4346.11.11.11.2.18.1.1.1 | ColumnflWorkFWCtrlDigitalOutputIndex | read-only | current | This object identifies the digital output |
| 1.3.6.1.4.1.4346.11.11.11.2.18.1.1.2 | ColumnflWorkFWCtrlDigitalOutputStatus | read-write | current | Get back or set the current state of a digital output. on(1) = signal present at output off(2) = signal not present at output unknown(3) = signal status is unk… |
| 1.3.6.1.4.1.4346.11.11.11.2.18.1.1.3 | ColumnflWorkFWCtrlDigitalOutputEnable | read-write | current | Setting this object to disable(1) disables the direct access to the digital output from WEB, CLI and SNMP. Regardless of that, the digital out might be control… |
| 1.3.6.1.4.1.4346.11.11.11.2.18.1.1.4 | ColumnflWorkFWCtrlDigitalOutputEventDigitalInState | read-write | current | Setting this object to enable(2) leads to activating the digital output, if the digital input drives high state. |
| 1.3.6.1.4.1.4346.11.11.11.2.18.1.1.5 | ColumnflWorkFWCtrlDigitalOutputEventWlanState | read-write | current | Setting this object to enable(2) leads to activating the digital output, if the WLAN interface is activated. |
| 1.3.6.1.4.1.4346.11.11.11.2.18.1.1.6 | ColumnflWorkFWCtrlDigitalOutputEventWlanConnection | read-write | current | Setting this object to enable(2) leads to activating the digital output, if the device is associated to an access point |
| 1.3.6.1.4.1.4346.11.11.11.2.19 | NodeflWorkFWCtrlDLR | |||
| 1.3.6.1.4.1.4346.11.11.11.2.19.1 | TableflWorkFWCtrlDLRDomainTable | not-accessible | current | Every entry into the table contains information about a DLR domain. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1 | RowflWorkFWCtrlDLRDomainEntry | not-accessible | current | An entry in the flWorkFWCtrlDLRDomainTable. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.1 | ColumnflWorkFWCtrlDLRDomainIdx | read-only | current | Index number of the DLR-Domain. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.2 | ColumnflWorkFWCtrlDLRMode | read-write | current | Configured DLR role of this device. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.3 | ColumnflWorkFWCtrlDLRPort1 | read-write | current | First ring port of DLR. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.4 | ColumnflWorkFWCtrlDLRPort2 | read-write | current | Second ring port of DLR. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.5 | ColumnflWorkFWCtrlDLRBeaconInterval | read-write | current | Beacon Interval in microseconds if device acts as supervisor. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.6 | ColumnflWorkFWCtrlDLRBeaconTimeout | read-write | current | Beacon Timeout value in microseconds if device acts as supervisor. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.7 | ColumnflWorkFWCtrlDLRSupervisorPrecedence | read-write | current | Configured Supervisor precedence value for this device. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.8 | ColumnflWorkFWCtrlDLRVlanId | read-write | current | Configured VLAN ID which is used for DLR messages. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.9 | ColumnflWorkFWCtrlDLRRingStatus | read-only | current | Current status of the DLR ring. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.10 | ColumnflWorkFWCtrlDLRDeviceStatus | read-only | current | Current status of the DLR device. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.11 | ColumnflWorkFWCtrlDLRRingFaultCounter | read-only | current | Number of ring faults since last startup of the device. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.12 | ColumnflWorkFWCtrlDLRRingFaultCntClear | read-write | current | Sets the Ring fault counter to zero. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.13 | ColumnflWorkFWCtrlDLRActiveSupervisorIP | read-only | current | IP address of the active supervisor in the ring. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.14 | ColumnflWorkFWCtrlDLRActiveSupervisorMAC | read-only | current | MAC address of the active supervisor in the ring. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.15 | ColumnflWorkFWCtrlDLRLastNodePort1IP | read-only | current | IP address of the last node reachable from first ring port. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.16 | ColumnflWorkFWCtrlDLRLastNodePort1MAC | read-only | current | MAC address of the last node reachable from first ring port. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.17 | ColumnflWorkFWCtrlDLRLastNodePort2IP | read-only | current | IP address of the last node reachable from second ring port. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.18 | ColumnflWorkFWCtrlDLRLastNodePort2MAC | read-only | current | MAC address of the last node reachable from second ring port. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.19 | ColumnflWorkFWCtrlDLRRapidFaultClear | read-write | current | If device is in Rapid Fault State, it can be set back into normal state by using this object. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.20 | ColumnflWorkFWCtrlDLRActivePrecedence | read-only | current | Precedenc value of the active supervisor in the ring. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.21 | ColumnflWorkFWCtrlDLRVerifyFaultLocation | read-write | current | Discover the last active nodes of the ring in case of ring failure. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.1.1.22 | ColumnflWorkFWCtrlDLRRestartSignOn | read-write | current | Update the node table. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.2 | TableflWorkFWCtrlDLRNodeTable | not-accessible | current | Every entry into the table contains information about a node within the DLR ring. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.2.1 | RowflWorkFWCtrlDLRNodeEntry | not-accessible | current | An entry in the flWorkFWCtrlDLRNodeTable. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.2.1.2 | ColumnflWorkFWCtrlDLRNodeIdx | read-only | current | Index number of the DLR-Node in the ring. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.2.1.3 | ColumnflWorkFWCtrlDLRNodeIP | read-only | current | IP address of the node in the ring. |
| 1.3.6.1.4.1.4346.11.11.11.2.19.2.1.4 | ColumnflWorkFWCtrlDLRNodeMAC | read-only | current | MAC address of the node in the ring. |
| 1.3.6.1.4.1.4346.11.11.11.2.22 | NodeflWorkFWCtrlFileTransfer | |||
| 1.3.6.1.4.1.4346.11.11.11.2.22.1 | ScalarflWorkFWCtrlFileTransferTftpIPAddr | read-write | current | Write to this object sets the IP address for the TFTP server needed by the file transfer process. |
| 1.3.6.1.4.1.4346.11.11.11.2.22.2 | ScalarflWorkFWCtrlFileTransferTftpVapID | read-write | current | Sets the virtual access point to which the file will be transferred.(write-only object) |
| 1.3.6.1.4.1.4346.11.11.11.2.22.3 | ScalarflWorkFWCtrlFileTransferTftpProfileID | read-write | current | Sets the profile for which the file should be used. Only profile 1 is currently supported. |
| 1.3.6.1.4.1.4346.11.11.11.2.22.4 | ScalarflWorkFWCtrlFileTransferTftpFileType | read-write | current | Sets the file type which should be transferred. (write only object) |
| 1.3.6.1.4.1.4346.11.11.11.2.22.5 | ScalarflWorkFWCtrlFileTransferTftpFile | read-write | current | Writing to this object sets the file name for the file transfer process. |
| 1.3.6.1.4.1.4346.11.11.11.2.22.6 | ScalarflWorkFWCtrlFileTransferStatus | read-only | current | Information about the last file transfer process. |
| 1.3.6.1.4.1.4346.11.11.11.2.22.7 | ScalarflWorkFWCtrlFileTransferExecute | read-write | current | Setting this object to hostToDevice(2) causes a download of the configuration file from a TFTP server (host) to this device. Setting this object to deviceToHos… |
| 1.3.6.1.4.1.4346.11.11.11.2.23 | NodeflWorkFWCtrlDiag | |||
| 1.3.6.1.4.1.4346.11.11.11.2.23.1 | NodeflWorkFWCtrlDiagSurveillance | |||
| 1.3.6.1.4.1.4346.11.11.11.2.23.1.1 | TableflWorkFWCtrlDiagSurveillanceCrcMonitoringTable | not-accessible | current | Table of surveillance information. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.1.1.1 | RowflWorkFWCtrlDiagSurveillanceCrcMonitoringEntry | not-accessible | current | An entry in the flWorkFWCtrlDiagSurveillanceCrcMonitoringTable, containing surveillance information. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.1.1.1.1 | ColumnflWorkFWCtrlDiagSurveillanceCrcMonitoringPortIndex | read-only | current | This object identifies the port. This value is never greater than flWorkNetPortCapacity. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.1.1.1.2 | ColumnflWorkFWCtrlDiagSurveillanceCrcMonitoringProportionPeak | read-only | current | This is the highest proportion of crc errors in parts per million for a sample interval. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.1.1.1.3 | ColumnflWorkFWCtrlDiagSurveillanceCrcMonitoringPortStatus | read-only | current | The current status of the port. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.1.1.1.4 | ColumnflWorkFWCtrlDiagSurveillanceCrcMonitoringWarningThreshold | read-only | current | The warning threshold of the port in parts per million. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.1.1.1.5 | ColumnflWorkFWCtrlDiagSurveillanceCrcMonitoringCriticalThreshold | read-write | current | The critical threshold of the port in parts per million. A value between 1000 ppm (0,1%) and 1000000 ppm (100%) can be assignd. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.1.2 | ScalarflWorkFWCtrlDiagSurveillanceResetCrcValues | read-write | current | When set this object to clear(2), the crc proportion peak and crc port status of all ports will be cleared. Setting this object to noClear(1) has no effect. Re… |
| 1.3.6.1.4.1.4346.11.11.11.2.23.2 | NodeflWorkFWCtrlDiagSnapshot | |||
| 1.3.6.1.4.1.4346.11.11.11.2.23.2.1 | ScalarflWorkFWCtrlDiagSnapshotTrigger | read-write | current | When set this object to snap(2), a snapshot of the current runtime parameters will be taken. Setting this object to noSnap(1) has no effect. Reading this objec… |
| 1.3.6.1.4.1.4346.11.11.11.2.23.2.2 | ScalarflWorkFWCtrlDiagSnapshotStatus | read-only | current | Reading this object you get the status of the snapshot file. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.2.3 | ScalarflWorkFWCtrlDiagSnapshotTimeStamp | read-only | current | Reading this object you get the timestamp of the last snapshot. The value may be 'invalid' if no snapshot have been executed. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.3 | NodeflWorkFWCtrlDiagSyslog | |||
| 1.3.6.1.4.1.4346.11.11.11.2.23.3.1 | ScalarflWorkFWCtrlDiagSyslogEnable | read-write | current | Determines whether this device will sent messages to configured syslog servers. If this object is set to disable(1) no message will be sent. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.3.2 | TableflWorkFWCtrlDiagSyslogServTable | not-accessible | current | Display available syslog servers. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.3.2.1 | RowflWorkFWCtrlDiagSyslogServEntry | not-accessible | current | Each entry in this table represents an syslog server. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.3.2.1.1 | ColumnflWorkFWCtrlDiagSyslogServIndex | read-only | current | Each index is the identification number of a syslog server. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.3.2.1.2 | ColumnflWorkFWCtrlDiagSyslogServIP | read-write | current | IP address of the syslog server. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.3.2.1.3 | ColumnflWorkFWCtrlDiagSyslogServPort | read-write | current | Port number of the syslog server. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.3.2.1.4 | ColumnflWorkFWCtrlDiagSyslogServName | read-write | current | Name of the syslog server. The maximum size of the string is 255 characters. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.3.3 | ScalarflWorkFWCtrlDiagSyslogTestMsg | read-write | current | Setting this object to sendTestMsg(2) a syslog test message will be sent to the configured syslog servers. Setting this object to noTestMsg(1) has no effect. (… |
| 1.3.6.1.4.1.4346.11.11.11.2.23.3.4 | TableflWorkFWCtrlDiagSyslogMsgGroupTable | not-accessible | current | Display available syslog message groups. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.3.4.1 | RowflWorkFWCtrlDiagSyslogMsgGroupEntry | not-accessible | current | Each entry in this table represents a group of syslog messages. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.3.4.1.1 | ColumnflWorkFWCtrlDiagSyslogMsgGroupIndex | read-only | current | Each index is the identification number of a syslog message group. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.3.4.1.2 | ColumnflWorkFWCtrlDiagSyslogMsgGroupName | read-only | current | Name of the message group. |
| 1.3.6.1.4.1.4346.11.11.11.2.23.3.4.1.3 | ColumnflWorkFWCtrlDiagSyslogMsgGroupState | read-write | current | Determines whether this device will sent a message from this message group to the syslog servers. If this object is set to disable(1) no message from this grou… |
| 1.3.6.1.4.1.4346.11.11.15 | NodeflSwitch | |||
| 1.3.6.1.4.1.4346.11.11.15.1 | NodeflSwitchCtrl | |||
| 1.3.6.1.4.1.4346.11.11.15.1.1 | ScalarflSwitchCtrlSpanTree | read-write | current | Enable/ disable the (Rapid) Spanning Tree Protocol for the bridge. When 'disable(1)', all ports of the device are placed in the forwarding mode, regardless of … |
| 1.3.6.1.4.1.4346.11.11.15.1.2 | ScalarflSwitchCtrlRedundancy | read-write | current | This object shows the chosen redundancy mechanism. The value of 'noRedunduncy(1)' disables all redundancy mechanism, sets all redundancy parameters to default … |
| 1.3.6.1.4.1.4346.11.11.15.1.3 | ScalarflSwitchCtrlMulticast | read-write | current | Enable/ disable the web pages for the multicast configuration. When 'disable(1)', all multicast web pages for the multicast support are hidden. When 'enable(2)… |
| 1.3.6.1.4.1.4346.11.11.15.1.4 | ScalarflSwitchCtrlVlan | read-write | current | Enable/ disable the web pages for the vlan configuration. When 'disable(1)', all vlan web pages for the vlan support are hidden. When 'enable(2)', the you get … |
| 1.3.6.1.4.1.4346.11.11.15.1.5 | ScalarflSwitchCtrlVlanTagMode | read-write | current | In the mode vlanTransparent(1) the switch ignores the vlan id of incomming ethernet packets and uses only the priority information out of receiving frames. The… |
| 1.3.6.1.4.1.4346.11.11.15.1.6 | ScalarflSwitchCtrlVlanTagStatus | read-only | current | Information about the VLAN mode the switch is using. In the mode vlanTransparent(1) the switch ignores the vlan id of incomming ethernet packets and uses only … |
| 1.3.6.1.4.1.4346.11.11.15.1.7 | ScalarflSwitchCtrlLldp | read-write | current | Enable/ disable the link layer discovery protocol for the bridge. |
| 1.3.6.1.4.1.4346.11.11.15.1.8 | ScalarflSwitchCtrlRSTPLargeTreeSupport | read-write | current | Enable/ disable the Large Tree enhancement of the Rapid-Spanning-Tree- Protocol. When 'disable(1)', only 7 Switches under the root can be placed. When 'enable(… |
| 1.3.6.1.4.1.4346.11.11.15.1.9 | ScalarflSwitchCtrlMacHashMode | read-write | current | This object enables the user to optimize the hash mode used for mac address table lookup in the switch controllers. One algorithm is optimized for random mac a… |
| 1.3.6.1.4.1.4346.11.11.15.1.10 | ScalarflSwitchCtrlDhcpRelayAgentUi | read-write | current | Enable/ disable web based user interface for the DHCP relay agent. You may configure the DHCP relay agent at any time using SNMP. If you want to configure the … |
| 1.3.6.1.4.1.4346.11.11.15.1.11 | ScalarflSwitchCtrlMacTableErase | read-write | current | This object will request the device, to delete all his entries in the mac-address-table. |
| 1.3.6.1.4.1.4346.11.11.15.1.14 | ScalarflSwitchCtrlRmonHistory | read-write | current | Enable or disable the rmon history for the device. |
| 1.3.6.1.4.1.4346.11.11.15.1.15 | ScalarflSwitchCtrlLldpFlooding | read-write | current | Enable/ disable flooding of LLDP BPDUs on all ports if LLDP is not enabled or not supported. |
| 1.3.6.1.4.1.4346.11.11.15.1.18 | ScalarflSwitchCtrlQosProfile | read-write | current | For several traffic classes, predefined QoS scheme can be used, which will reconfigure priority mapping and queue usage to optimize the switch performance and … |
| 1.3.6.1.4.1.4346.11.11.15.2 | NodeflSwitchPortMirr | |||
| 1.3.6.1.4.1.4346.11.11.15.2.1 | ScalarflSwitchPortMirrDestinationPort | read-write | current | Switch port that acts as mirror (destination). Don't set the same port as mirror and mirrored. |
| 1.3.6.1.4.1.4346.11.11.15.2.2 | ScalarflSwitchPortMirrSourcePort | read-write | current | Switch port that is mirrored (source). Value of 0 means not set. The object flSwitchPortMirrStatus becomes then the value disable(1) automatically. |
| 1.3.6.1.4.1.4346.11.11.15.2.3 | ScalarflSwitchPortMirrStatus | read-write | current | The status of the port mirroring. The value enable(2)activates port mirroing for the ports given by the objects flSwitchPortMirrDestination and flSwitchPortMir… |
| 1.3.6.1.4.1.4346.11.11.15.2.4 | ScalarflSwitchPortMirrIngressSourcePort | read-write | current | All switch ports the ingress traffic should be mirrored (source). Setup a mask where 1/0 means enabled/disabled for each port. The mask beginns with the first … |
| 1.3.6.1.4.1.4346.11.11.15.2.5 | ScalarflSwitchPortMirrEgressSourcePort | read-write | current | Switch ports which egress traffic should be mirrored (source). Setup a mask where 1/0 means enabled/disabled for each port. The mask beginns with the first por… |
| 1.3.6.1.4.1.4346.11.11.15.3 | NodeflSwitchIgmp | |||
| 1.3.6.1.4.1.4346.11.11.15.3.1 | NodeflSwitchIgmpSnoop | |||
| 1.3.6.1.4.1.4346.11.11.15.3.1.1 | ScalarflSwitchIgmpSnoopEnable | read-write | current | Setting this object to enable(2) enables IGMP Snooping. Setting it to disable(1) disables IGMP Snooping. |
| 1.3.6.1.4.1.4346.11.11.15.3.1.3 | ScalarflSwitchIgmpSnoopAging | read-write | current | The timeout period in seconds for aging out Multicast Groups dynamically learned with IGMP Snooping. Note that aging operates on a per interface per VLAN per m… |
| 1.3.6.1.4.1.4346.11.11.15.3.1.4 | TableflSwitchIgmpSnoopTable | not-accessible | current | This table, which provides IGMP Snooping information, augments the 'dot1qStaticMulticastTable' in the Q-MIB (RFC2674). |
| 1.3.6.1.4.1.4346.11.11.15.3.1.4.1 | RowflSwitchIgmpSnoopEntry | not-accessible | current | Displays by VLAN ID and Multicast Group the set of ports enabled to forward Multicast Group traffic as determined by the IGMP Snooping task. |
| 1.3.6.1.4.1.4346.11.11.15.3.1.4.1.1 | ColumnflSwitchIgmpSnoopEgressPorts | read-only | current | This read-only object displays the set of ports enabled to forward specific Multicast Group traffic as determined by the IGMP Snooping task. It should be noted… |
| 1.3.6.1.4.1.4346.11.11.15.3.1.5 | NodeflSwitchIgmpSnoopExtended | |||
| 1.3.6.1.4.1.4346.11.11.15.3.1.5.1 | ScalarflSwitchBlockUnknownMulticastAtQuerier | read-write | current | When this object is set to enable(2) the switch doesn't forward multicast packets of groups he received no igmp membership report before. Setting this object t… |
| 1.3.6.1.4.1.4346.11.11.15.3.1.5.2 | ScalarflSwitchForwardUnknownMulticastToQuerier | read-write | current | Setting this object to enable(2) causes the switch to forward multicast packets of groups he saw no membership reports before only at ports receiving queries. … |
| 1.3.6.1.4.1.4346.11.11.15.3.1.5.3 | ScalarflSwitchIGMPAutoQueryPort | read-write | current | Setting this object to enable(2) causes the switch to use autodetection of additional query ports by other protocols like RSTP-Fast-Ring-Detection or Media Red… |
| 1.3.6.1.4.1.4346.11.11.15.3.1.5.4 | ScalarflSwitchIGMPAutoQueryPortsClear | read-write | current | Setting this object to cleanr(2) causes the switch to remove all ports from the Auto Query Port list. After the IGMP Aging time has expired, the ports may be r… |
| 1.3.6.1.4.1.4346.11.11.15.3.1.5.5 | ScalarflSwitchIGMPStaticQueryPorts | read-write | current | This object reflects the configuration of static Query Ports, where each bit of the value represents the state of one port. If a port is configured as query po… |
| 1.3.6.1.4.1.4346.11.11.15.3.2 | NodeflSwitchIgmpQuery | |||
| 1.3.6.1.4.1.4346.11.11.15.3.2.1 | TableflSwitchIgmpQueryTable | not-accessible | current | A table displaying the IGMP Router Query PDU ports. |
| 1.3.6.1.4.1.4346.11.11.15.3.2.1.1 | RowflSwitchIgmpQueryEntry | not-accessible | current | A table displaying the IGMP Router Query PDU ports. These are maintained on a per VLAN basis. |
| 1.3.6.1.4.1.4346.11.11.15.3.2.1.1.1 | ColumnflSwitchIgmpQueryPorts | read-only | current | This read-only object displays the set of ports that have received IGMP Router Query PDUs for this VLAN as determined by the IGMP Snooping task. |
| 1.3.6.1.4.1.4346.11.11.15.3.2.2 | ScalarflSwitchIgmpQueryEnable | read-write | current | Setting this object to version1(2) or version2(3) the device sends igmp queries depending of the selected protocol version. IGMP Snooping must be enabled too (… |
| 1.3.6.1.4.1.4346.11.11.15.3.2.3 | ScalarflSwitchIgmpQueryInterval | read-write | current | The query interval is the interval between General Queries sent by the querier. The granularity of this timer is 1 second. |
| 1.3.6.1.4.1.4346.11.11.15.3.2.4 | ScalarflSwitchIgmpQueryActiveIP | read-only | current | The device ip address of the last query which has been received on this device and selected as active querier. If the device itself is active querier, 0 is ret… |
| 1.3.6.1.4.1.4346.11.11.15.3.3 | ScalarflSwitchIgmpTablesErase | read-write | current | When set this object to eraseIgmpTables(2), all learned igmp information will be erased. Setting this object to doNothing(1) has no effect. Reading this object… |
| 1.3.6.1.4.1.4346.11.11.15.4 | NodeflSwitchRedundancy | |||
| 1.3.6.1.4.1.4346.11.11.15.4.1 | ScalarflSwitchCtrlRSTPFastRingDetection | read-write | current | Enable/ disable the Fast Ring Detection enhancement of the Rapid-Spanning-Tree-Protocol. When 'disable(1)', the normal RSTP will be used. When 'enable(2)', it … |
| 1.3.6.1.4.1.4346.11.11.15.4.2 | TableflSwitchRSTPRingTable | not-accessible | current | Table of information about the identified rings in the RSTP tree. |
| 1.3.6.1.4.1.4346.11.11.15.4.2.1 | RowflSwitchRSTPRingEntry | not-accessible | current | An entry in the table, containing information about the identified rings in the RSTP tree. |
| 1.3.6.1.4.1.4346.11.11.15.4.2.1.1 | ColumnflSwitchRSTPRingIndex | read-only | current | This object identifies the ring identifier for which this entry contains information. |
| 1.3.6.1.4.1.4346.11.11.15.4.2.1.2 | ColumnflSwitchRSTPRingMAC | read-only | current | This is the Macaddress of the Switch with the Alternate Port of this ring. |
| 1.3.6.1.4.1.4346.11.11.15.4.2.1.3 | ColumnflSwitchRSTPRingBlockPort | read-only | current | This is the number of the Alternate Port of this ring. |
| 1.3.6.1.4.1.4346.11.11.15.4.2.1.4 | ColumnflSwitchRSTPRingRootPort | read-only | current | The Portnumber of the Root Port which belongs to the Ring |
| 1.3.6.1.4.1.4346.11.11.15.4.2.1.5 | ColumnflSwitchRSTPRingDesPort | read-only | current | The Portnumber of the Designated Port which belongs to the Ring |
| 1.3.6.1.4.1.4346.11.11.15.4.2.1.6 | ColumnflSwitchRSTPRingStatus | read-only | current | This reports the current status of the ring detection. |
| 1.3.6.1.4.1.4346.11.11.15.4.3 | ScalarflSwitchRSTPRingFailedPort | read-only | current | This reports the port number of a failed link. If no error have occured, it contains '0' |
| 1.3.6.1.4.1.4346.11.11.15.4.4 | TableflSwitchRSTPextPortTable | not-accessible | current | Table of extended RSTP port objects. |
| 1.3.6.1.4.1.4346.11.11.15.4.4.1 | RowflSwitchRSTPextPortEntry | not-accessible | current | An entry in the table, containing extended information and configuration objects about Spanning-Tree. |
| 1.3.6.1.4.1.4346.11.11.15.4.4.1.1 | ColumnflSwitchRSTPextPortNum | read-only | current | This object identifies the port number. |
| 1.3.6.1.4.1.4346.11.11.15.4.4.1.2 | ColumnflSwitchRSTPextAutoEdge | read-write | current | This object does reflect the Auto-Edge Parameter of Spanning-Tree. When this object is set to disable, the attribute of dot1dStpPortAdminEdgePort becomes activ… |
| 1.3.6.1.4.1.4346.11.11.15.4.4.1.3 | ColumnflSwitchRSTPextBPDUFlood | read-write | current | This object does reflect the BPDU Flood mode on the port. If enabled the BPDU traffic arriving on this port when STP is disabled is flooded. If disabled the BP… |
| 1.3.6.1.4.1.4346.11.11.15.5 | NodeflSwitchRelayAgentDhcp | |||
| 1.3.6.1.4.1.4346.11.11.15.5.1 | ScalarflSwitchRelayAgentDhcpCtrl | read-write | current | Status of the DHCP Relay Agent given by the user. This object will be stored in the configuration file. Please note that the dhcp relay agent is not active if … |
| 1.3.6.1.4.1.4346.11.11.15.5.2 | ScalarflSwitchRelayAgentDhcpIpAddress | read-write | current | DHCP Server IP Address for the DHCP Relay Agent. |
| 1.3.6.1.4.1.4346.11.11.15.5.3 | ScalarflSwitchRelayAgentDhcpStatus | read-only | current | The verbal current status of the DHCP Relay Agent. This status is influenced by flSwitchRelayAgentDhcpCtrl and the IP address assignment in this system. If the… |
| 1.3.6.1.4.1.4346.11.11.15.5.4 | ScalarflSwitchRelayAgentDhcpRIdType | read-write | current | This object indicates if the DHCP relay agent uses its own mac address or its own ip address as Remote ID value when inserting DHCP option 82 fields into the r… |
| 1.3.6.1.4.1.4346.11.11.15.5.5 | TableflSwitchRelayAgentDhcpPortTable | not-accessible | current | Table with port based control information and settings concerning the DHCP relay agent. |
| 1.3.6.1.4.1.4346.11.11.15.5.5.1 | RowflSwitchRelayAgentDhcpPortEntry | not-accessible | current | An entry in the table, containing information and settings concerning port based configuration of the DHCP relay agent. |
| 1.3.6.1.4.1.4346.11.11.15.5.5.1.1 | ColumnflSwitchRelayAgentDhcpPortCtrlIndex | read-only | current | The port number referenced by this table line. |
| 1.3.6.1.4.1.4346.11.11.15.5.5.1.2 | ColumnflSwitchRelayAgentDhcpPortCtrlOperation | read-write | current | The operational status of the DHCP relay agent for this port. The relay agent will only care about DHCP messages received on this port if the operational statu… |
| 1.3.6.1.4.1.4346.11.11.15.6 | NodeflSwitchRateCtrl | |||
| 1.3.6.1.4.1.4346.11.11.15.6.1 | ScalarflSwitchRateCtrlBroadcast | read-write | current | Enable/ disable the Broadcast limitation of rate control. |
| 1.3.6.1.4.1.4346.11.11.15.6.2 | ScalarflSwitchRateCtrlMulticast | read-write | current | Enable/ disable the Multicast limitation of rate control. |
| 1.3.6.1.4.1.4346.11.11.15.6.3 | ScalarflSwitchRateCtrlBitrate | read-write | current | Bit rate configuration for all the ports. Value ranges in kbps. It will be rounded to the last valid value. |
| 1.3.6.1.4.1.4346.11.11.15.6.4 | ScalarflSwitchDot3FlowControlMode | read-write | current | Config switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports. |
| 1.3.6.1.4.1.4346.11.11.15.6.5 | ScalarflSwitchBroadcastControlMode | read-write | current | The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadca… |
| 1.3.6.1.4.1.4346.11.11.15.6.6 | ScalarflSwitchBroadcastControlThreshold | read-write | current | Configures the broadcast storm recovery threshold for this port in packets-per-second. |
| 1.3.6.1.4.1.4346.11.11.15.6.7 | ScalarflSwitchMulticastControlMode | read-write | current | The switch config multicast allows you to enable or disable multicast storm recovery mode. When you specify Enable for multicast Storm Recovery and the multica… |
| 1.3.6.1.4.1.4346.11.11.15.6.8 | ScalarflSwitchMulticastControlThreshold | read-write | current | Configures the multicast storm recovery threshold for this port in packets-per-second. |
| 1.3.6.1.4.1.4346.11.11.15.6.9 | ScalarflSwitchUnicastControlMode | read-write | current | The switch config unicast allows you to enable or disable unicast storm recovery mode. When you specify Enable for unicast Storm Recovery and the unknown unica… |
| 1.3.6.1.4.1.4346.11.11.15.6.10 | ScalarflSwitchUnicastControlThreshold | read-write | current | Configures the unicast storm recovery threshold for this port in packets-per-second. |
| 1.3.6.1.4.1.4346.11.11.15.6.11 | TableflSwitchStormCtrlTable | not-accessible | current | Table of information about the Storm control for each port. |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1 | RowflSwitchStormCtrlEntry | not-accessible | current | An entry in the table, containing information about the storm control for each port. |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.1 | ColumnflSwitchStormCtrlPortNum | read-only | current | This object identifies the port number. |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.2 | ColumnflSwitchStormCtrlBroadcast | read-write | current | Enable/ disable the broadcast storm control function for the port. When 'disable(1)', the broadcast storm control disabled. When 'enable(2)', the broadcast sto… |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.3 | ColumnflSwitchStormCtrlMulticast | read-write | current | Enable/ disable the multicast storm control function for the port. When 'disable(1)', the multicast storm control disabled. When 'enable(2)', the multicast sto… |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.4 | ColumnflSwitchStormCtrlUnicast | read-write | current | Enable/ disable the unknown unicast storm control function for the port. When 'disable(1)', the unknown unicast storm control disabled. When 'enable(2)', the u… |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.5 | ColumnflSwitchStormCtrlThreshold | read-write | current | Set the storm control threshold percentage for broadcast, multicast and unknown unicast. The storm control take place whenever the specific packet rate over th… |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.6 | ColumnflSwitchStormCtrlThresholdUnicast | read-write | current | Set the storm control threshold percentage for unknown unicast. The storm control take place whenever the specific packet rate over the threshold. Acceptable p… |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.7 | ColumnflSwitchStormCtrlThresholdBroadcast | read-write | current | Set the storm control threshold percentage broadcast The storm control take place whenever the specific packet rate over the threshold. Acceptable percentage v… |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.8 | ColumnflSwitchStormCtrlThresholdMulticast | read-write | current | Set the storm control threshold percentage for multicast. The storm control take place whenever the specific packet rate over the threshold. Acceptable percent… |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.9 | ColumnflSwitchStormCtrlBandwidthUnicast | read-write | current | Configures the unicast storm recovery threshold for this port in kilobits-per-second. |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.10 | ColumnflSwitchStormCtrlBandwidthBroadcast | read-write | current | Configures the broadcast storm recovery threshold for this port in kilobits-per-second. |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.11 | ColumnflSwitchStormCtrlBandwidthMulticast | read-write | current | Configures the multicast storm recovery threshold for this port in kilobits-per-second. |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.12 | ColumnflSwitchStormCtrlFrameLimitUnicast | read-write | current | Configures the unicast storm recovery threshold for this port in packets-per-second. |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.13 | ColumnflSwitchStormCtrlFrameLimitBroadcast | read-write | current | Configures the broadcast storm recovery threshold for this port in packets-per-second. |
| 1.3.6.1.4.1.4346.11.11.15.6.11.1.14 | ColumnflSwitchStormCtrlFrameLimitMulticast | read-write | current | Configures the multicast storm recovery threshold for this port in packets-per-second. |
| 1.3.6.1.4.1.4346.11.11.15.7 | NodeflSwitchTrafficShaping | |||
| 1.3.6.1.4.1.4346.11.11.15.7.1 | TableflSwitchTrafficShapingTable | not-accessible | current | Table of class-of-service queue configuration controls for the specified interface. |
| 1.3.6.1.4.1.4346.11.11.15.7.1.1 | RowflSwitchTrafficShapingEntry | not-accessible | current | Provides a general control mechanism that affects all queues on a given interface. |
| 1.3.6.1.4.1.4346.11.11.15.7.1.1.1 | ColumnflSwitchTrafficShapingIntfIndex | not-accessible | current | A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable. A value of zero represents global configuration, which in turn cau… |
| 1.3.6.1.4.1.4346.11.11.15.7.1.1.2 | ColumnflSwitchTrafficShapingIntfRate | read-create | current | Maximum bandwidth allowed for this interface as a whole, typically used to shape the outbound transmission rate. The value is specified in terms of percentage … |
| 1.3.6.1.4.1.4346.11.11.15.8 | NodeflSwitchLagConfig | |||
| 1.3.6.1.4.1.4346.11.11.15.8.1 | ScalarflSwitchLagCreate | read-write | current | When this object is set with a non-empty string, a new LAG will be created if possible, with the entered string as its name. Get operation on this MIB object r… |
| 1.3.6.1.4.1.4346.11.11.15.8.2 | TableflSwitchLagSummaryTable | not-accessible | current | A summary table of the switch's LAG config entries |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1 | RowflSwitchLagSummaryEntry | not-accessible | current | Switch's LAG config entry |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.1 | ColumnflSwitchLagIndex | read-only | current | This value corresponds with the LAG interface in the ifTable. |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.2 | ColumnflSwitchLagName | read-write | current | The associated name of the LAG used during creation. |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.4 | ColumnflSwitchLagLinkTrap | read-write | current | Configures sending Link Up/Down traps when the LAG interface goes Up or Down. |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.5 | ColumnflSwitchLagAdminMode | read-write | current | Administratively enables or disables this LAG interface. |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.6 | ColumnflSwitchLagStpMode | read-write | current | If Dot1d is enabled, the valid values are: dot1d(1), fast(2), and off(3) If Dot1s is enabled, the valid values are: off(3) and dot1s(4) |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.7 | ColumnflSwitchLagAddPort | read-write | current | Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: The duplex type for the port to be added must be full … |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.8 | ColumnflSwitchLagDeletePort | read-write | current | Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable. |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.9 | ColumnflSwitchLagStatus | read-write | current | active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG. |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.10 | ColumnflSwitchLagType | read-only | current | static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained. |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.11 | ColumnflSwitchLagStaticCapability | read-write | current | enable(1) - Static capability is enabled for this LAG interface disable(2) - Static capability is disabled for this LAG interface |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.12 | ColumnflSwitchLagHashOption | read-write | current | Valid values correspond to 1 (=Source MAC, VLAN, EtherType, and incoming port associated with the packet) 2 (=Destination MAC, VLAN, EtherType, and incoming po… |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.13 | ColumnflSwitchLagMaxFrameSize | read-write | current | This object configures the maximum transmission unit(MTU) or the size of the largest packet that can be sent/received on the interface. |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.14 | ColumnflSwitchLagJumboFrame | read-write | current | This object enables/disables jumbo frames on an interface. |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.15 | ColumnflSwitchLagLinkStatus | read-only | current | The current operational state of the LAG interface. |
| 1.3.6.1.4.1.4346.11.11.15.8.2.1.16 | ColumnflSwitchLagMode | read-write | current | static(2) - This LAG is staticly maintained. lacp-passiv(3) - This LAG is dynamicly maintained.Pdus are only send when the partner does. lacp-activ(4) - This L… |
| 1.3.6.1.4.1.4346.11.11.15.8.3 | TableflSwitchLagConfigTable | not-accessible | current | A detailed table of the switch's LAG config entries |
| 1.3.6.1.4.1.4346.11.11.15.8.3.1 | RowflSwitchLagConfigEntry | not-accessible | current | Switch's LAG config entry |
| 1.3.6.1.4.1.4346.11.11.15.8.3.1.1 | ColumnflSwitchLagConfigIndex | read-only | current | LAG index |
| 1.3.6.1.4.1.4346.11.11.15.8.3.1.2 | ColumnflSwitchLagConfigIfIndex | read-only | current | LAG port index |
| 1.3.6.1.4.1.4346.11.11.15.8.3.1.3 | ColumnflSwitchLagConfigPortSpeed | read-only | current | LAG port speed. See agentPortType for a description and list of valid values. |
| 1.3.6.1.4.1.4346.11.11.15.8.3.1.4 | ColumnflSwitchLagConfigPortStatus | read-only | current | LAG port status. active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG. |
| 1.3.6.1.4.1.4346.11.11.15.8.4 | ScalarflSwitchLagGlobalHashOption | read-write | current | Valid values correspond to 1 (=Source MAC, VLAN, EtherType, and incoming port associated with the packet) 2 (=Destination MAC, VLAN, EtherType, and incoming po… |
| 1.3.6.1.4.1.4346.11.11.15.9 | NodeflSwitchDhcpServerConfig | |||
| 1.3.6.1.4.1.4346.11.11.15.9.1 | ScalarflSwitchDhcpServerCtrl | read-write | current | Status of the DHCP server given by the user. |
| 1.3.6.1.4.1.4346.11.11.15.9.2 | ScalarflSwitchDhcpServerStartAddress | read-write | current | The IPv4 address of the first address in the range. The value of dhcpv4ServerRangeStartAddress MUST be less than or equal to the value of flSwitchDhcpServerEnd… |
| 1.3.6.1.4.1.4346.11.11.15.9.3 | ScalarflSwitchDhcpServerEndAddress | read-write | current | The IPv4 address of the last address in the range. The value of dhcpv4ServerRangeEndAddress MUST be greater than or equal to the value of flSwitchDhcpServerSta… |
| 1.3.6.1.4.1.4346.11.11.15.9.4 | ScalarflSwitchDhcpServerSubnetmask | read-write | current | The subnet address mask. |
| 1.3.6.1.4.1.4346.11.11.15.9.5 | ScalarflSwitchDhcpServerGatewayAddress | read-write | current | IP address of the default gateway. |
| 1.3.6.1.4.1.4346.11.11.15.9.6 | ScalarflSwitchDhcpServerDnsAddress | read-write | current | IP address of the DNS. |
| 1.3.6.1.4.1.4346.11.11.15.9.7 | ScalarflSwitchDhcpServerLeaseTime | read-write | current | Lease time in units of seconds. Valid values are 1 hour, 1 day, 1 week or 1 month. |
| 1.3.6.1.4.1.4346.11.11.15.9.8 | ScalarflSwitchDhcpServerStatus | read-only | current | This object is used to synchronize the modification of the DHCP server parameters used by the protocol stack based on the flSwitchDhcpServerConfig MIB objects.… |
| 1.3.6.1.4.1.4346.11.11.15.9.9 | ScalarflSwitchDhcpServerApply | read-write | current | This object is used to apply the modification of the DHCP server parameters used by the protocol stack based on the flSwitchDhcpServerConfig MIB objects. This … |
| 1.3.6.1.4.1.4346.11.11.15.9.10 | ScalarflSwitchDhcpServerAddressPoolSize | read-write | current | This object specifies the pool size of IP addresses which will be distributed by the DHCP server |
| 1.3.6.1.4.1.4346.11.11.15.9.11 | ScalarflSwitchDhcpServerAcceptBootp | read-write | current | This object specifies, if the DHCP Server accepts BOOTP requests (enable) or not (disable). |
| 1.3.6.1.4.1.4346.11.11.15.9.12 | ScalarflSwitchDhcpServerRunning | read-only | current | This object returns the current state of the DHCP server. If the pool is not configured correctly, the server may go into inactive state. |
| 1.3.6.1.4.1.4346.11.11.15.9.100 | NodeflSwitchDhcpPortLocalService | |||
| 1.3.6.1.4.1.4346.11.11.15.9.100.1 | TableflSwitchDhcpPortLocalTable | not-accessible | current | Table with port based control information and settings concerning the Port local DHCP service. |
| 1.3.6.1.4.1.4346.11.11.15.9.100.1.1 | RowflSwitchDhcpPortLocalEntry | not-accessible | current | An entry in the table, containing information and settings concerning port based configuration of Port local DHCP service. |
| 1.3.6.1.4.1.4346.11.11.15.9.100.1.1.1 | ColumnflSwitchDhcpPortLocalIndex | read-only | current | The port number referenced by this table line. |
| 1.3.6.1.4.1.4346.11.11.15.9.100.1.1.2 | ColumnflSwitchDhcpPortLocalOperation | read-write | current | The operational status of the Port local DHCP service for this port. NOTE: There will be no general DHCP service or Relay Agent functionality on this port if e… |
| 1.3.6.1.4.1.4346.11.11.15.9.100.1.1.3 | ColumnflSwitchDhcpPortLocalLeaseIP | read-write | current | The IPv4 address which will be offered to the client requesting on this port. |
| 1.3.6.1.4.1.4346.11.11.15.9.100.1.1.4 | ColumnflSwitchDhcpPortLocalNetmask | read-write | current | The netmask which will be offered to the client requesting on this port. |
| 1.3.6.1.4.1.4346.11.11.15.9.100.1.1.5 | ColumnflSwitchDhcpPortLocalGateway | read-write | current | The router address which will be offered to the client requesting on this port. |
| 1.3.6.1.4.1.4346.11.11.15.9.100.1.1.6 | ColumnflSwitchDhcpPortLocalDns | read-write | current | The dns address which will be offered to the client requesting on this port. |
| 1.3.6.1.4.1.4346.11.11.15.9.100.2 | ScalarflSwitchDhcpPortLocalClear | read-write | current | This object allows to delete all configured local bindings. Port local service will be disabled. |
| 1.3.6.1.4.1.4346.11.11.15.9.101 | NodeflSwitchDhcpCurrentLeases | |||
| 1.3.6.1.4.1.4346.11.11.15.9.101.1 | TableflSwitchDhcpCurrentLeaseTable | not-accessible | current | Table with current leases of lokal DHCP server. |
| 1.3.6.1.4.1.4346.11.11.15.9.101.1.1 | RowflSwitchDhcpCurrentLeaseEntry | not-accessible | current | An entry in the table does contain information about an address-lease. |
| 1.3.6.1.4.1.4346.11.11.15.9.101.1.1.1 | ColumnflSwitchDhcpCurrentLeaseIP | read-only | current | The IP address which has been leased. |
| 1.3.6.1.4.1.4346.11.11.15.9.101.1.1.2 | ColumnflSwitchDhcpCurrentLeaseClientID | read-only | current | The identifier of the client which holds the lease. |
| 1.3.6.1.4.1.4346.11.11.15.9.101.1.1.3 | ColumnflSwitchDhcpCurrentLeaseSystemUpTime | read-only | current | This object contains the system up time at which an event occured. |
| 1.3.6.1.4.1.4346.11.11.15.9.101.1.1.4 | ColumnflSwitchDhcpCurrentLeaseTime | read-only | current | This object contains the UTC time at which an event occured. |
| 1.3.6.1.4.1.4346.11.11.15.9.101.1.1.5 | ColumnflSwitchDhcpCurrentLeaseDate | read-only | current | This object contains the UTC date at which an event occured. |
| 1.3.6.1.4.1.4346.11.11.15.9.101.1.1.6 | ColumnflSwitchDhcpCurrentLeaseSeconds | read-only | current | This object contains the UTC seconds used in NTP at which an event occured. |
| 1.3.6.1.4.1.4346.11.11.15.9.101.1.1.7 | ColumnflSwitchDhcpCurrentLeaseStatus | read-only | current | The status of the current lease. |
| 1.3.6.1.4.1.4346.11.11.15.9.101.1.1.8 | ColumnflSwitchDhcpCurrentLeaseLocalPort | read-only | current | The port on which the lease has been registered. If 0 no port is associated to this entry. |
| 1.3.6.1.4.1.4346.11.11.15.9.101.2 | ScalarflSwitchDhcpCurrentLeasesRelease | read-write | current | This object starts the release process if set to (release). The release process will ping every dynamically allocated IP and frees the lease if no answer is re… |
| 1.3.6.1.4.1.4346.11.11.15.9.102 | NodeflSwitchDhcpStaticBinding | |||
| 1.3.6.1.4.1.4346.11.11.15.9.102.1 | TableflSwitchDhcpStaticBindingTable | not-accessible | current | Table with configured bindings of lokal DHCP server. |
| 1.3.6.1.4.1.4346.11.11.15.9.102.1.1 | RowflSwitchDhcpStaticBindingEntry | not-accessible | current | An entry in the table does contain information about an address-lease. |
| 1.3.6.1.4.1.4346.11.11.15.9.102.1.1.1 | ColumnflSwitchDhcpStaticBindingIP | read-write | current | The IP address reserved for static entry. setting this object to 0.0.0.0 will delete the static entry. |
| 1.3.6.1.4.1.4346.11.11.15.9.102.1.1.2 | ColumnflSwitchDhcpStaticBindingClientID | read-write | current | The client to which the IP has been bound to. |
| 1.3.6.1.4.1.4346.11.11.15.9.102.2 | ScalarflSwitchDhcpStaticBindingClear | read-write | current | This object allows to delete all configured static binds on this server. |
| 1.3.6.1.4.1.4346.11.11.15.9.103 | NodeflSwitchDhcpPortServerService | |||
| 1.3.6.1.4.1.4346.11.11.15.9.103.1 | TableflSwitchDhcpPortServerTable | not-accessible | current | Table with port based control information and settings concerning the Port Server DHCP service. |
| 1.3.6.1.4.1.4346.11.11.15.9.103.1.1 | RowflSwitchDhcpPortServerEntry | not-accessible | current | An entry in the table, containing information and settings concerning port based configuration of Port Server DHCP service. |
| 1.3.6.1.4.1.4346.11.11.15.9.103.1.1.1 | ColumnflSwitchDhcpPortServerIndex | read-only | current | The port number referenced by this table line. |
| 1.3.6.1.4.1.4346.11.11.15.9.103.1.1.2 | ColumnflSwitchDhcpPortServerOperation | read-write | current | The operational status of the Port Server DHCP service. |
| 1.3.6.1.4.1.4346.11.11.15.9.103.1.1.3 | ColumnflSwitchDhcpPortServerStartAddress | read-write | current | The IPv4 address of the first address in the range. The value of flSwitchDhcpPortServerStartAddress MUST be less than or equal to the value of flSwitchDhcpPort… |
| 1.3.6.1.4.1.4346.11.11.15.9.103.1.1.4 | ColumnflSwitchDhcpPortServerAddressPoolSize | read-write | current | This object specifies the pool size of IP addresses which will be distributed by the Port DHCP server |
| 1.3.6.1.4.1.4346.11.11.15.9.103.1.1.5 | ColumnflSwitchDhcpPortServerSubnetmask | read-write | current | The subnet address mask. |
| 1.3.6.1.4.1.4346.11.11.15.9.103.1.1.6 | ColumnflSwitchDhcpPortServerGatewayAddress | read-write | current | IP address of the default gateway. |
| 1.3.6.1.4.1.4346.11.11.15.9.103.1.1.7 | ColumnflSwitchDhcpPortServerDnsAddress | read-write | current | IP address of the DNS. |
| 1.3.6.1.4.1.4346.11.11.15.9.103.1.1.8 | ColumnflSwitchDhcpPortServerLeaseTime | read-write | current | Lease time in units of seconds. Valid values are 1 hour, 1 day, 1 week or 1 month. |
| 1.3.6.1.4.1.4346.11.11.15.15 | NodeflSwitchDiffServConfig | |||
| 1.3.6.1.4.1.4346.11.11.15.15.1 | ScalarflSwitchDiffServEnable | read-write | current | DiffServ Admin Mode |
| 1.3.6.1.4.1.4346.11.11.15.15.2 | TableflSwitchDiffServConfigTable | not-accessible | current | A detailed table of the switch's created DiffServ Rules |
| 1.3.6.1.4.1.4346.11.11.15.15.2.1 | RowflSwitchDiffServConfigEntry | not-accessible | current | Switch's DiffServ config entry |
| 1.3.6.1.4.1.4346.11.11.15.15.2.1.1 | ColumnflSwitchDiffServCSIndex | read-only | current | DiffServ Rule Index |
| 1.3.6.1.4.1.4346.11.11.15.15.2.1.2 | ColumnflSwitchDiffServCSName | read-create | current | Name of the DiffServ Rule |
| 1.3.6.1.4.1.4346.11.11.15.15.2.1.3 | ColumnflSwitchDiffServCriType | read-create | current | This object must be created before the attributes or the match objects are created. Choose one of the following criteria types: ethertype(1) Match ethertype fi… |
| 1.3.6.1.4.1.4346.11.11.15.15.2.1.4 | ColumnflSwitchDiffServCriEtypeValue | read-create | current | Ethertype keyword match value for the rule - only valid if the flSwitchDiffServCriType is set to ethertype(1). A keyword of user-value(0) requires that the flS… |
| 1.3.6.1.4.1.4346.11.11.15.15.2.1.5 | ColumnflSwitchDiffServCriEtypeValueCustom | read-create | current | Ethertype match value for the class - only valid if the flSwitchDiffServCriType is set to ethertype(1) and the flSwitchDiffServCriEtypeValue is set to user-val… |
| 1.3.6.1.4.1.4346.11.11.15.15.2.1.6 | ColumnflSwitchDiffServCriIpTosBits | read-create | current | IP TOS bits match value for the rule - only valid if the flSwitchDiffServCriType is set to ipTos(8). The TOS bits are defined as all eight bits of the Service … |
| 1.3.6.1.4.1.4346.11.11.15.15.2.1.7 | ColumnflSwitchDiffServCriIpTosMask | read-create | current | IP TOS bits mask match value for the rule - only valid if the flSwitchDiffServCriType is set to ipTos(8). This mask value identifies the portion of flSwitchDif… |
| 1.3.6.1.4.1.4346.11.11.15.15.2.1.8 | ColumnflSwitchDiffServCriIpPrecedence | read-create | current | IP Precedence match value for the rule - only valid if the flSwitchDiffServCriType is set to ipPrecedence(7). The Precedence bits are defined as the high-order… |
| 1.3.6.1.4.1.4346.11.11.15.15.2.1.9 | ColumnflSwitchDiffServServiceType | read-create | current | This object allows configuration of the service provided to the packets that match the defined criteria. |
| 1.3.6.1.4.1.4346.11.11.15.15.2.1.10 | ColumnflSwitchDiffServServiceAssignQueueID | read-create | current | Queue identifier to which all inbound packets belonging to this class-instance are directed. This attribute is only valid if the value of flSwitchDiffServServi… |
| 1.3.6.1.4.1.4346.11.11.15.15.2.1.11 | ColumnflSwitchDiffServIncludedPorts | read-create | current | This object allows configuration of the list of ports to which this rule and the corresponding service is applicable to. This is a long strings of 0 and 1 posi… |
| 1.3.6.1.4.1.4346.11.11.15.15.2.1.12 | ColumnflSwitchDiffServRowStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this obj… |
| 1.3.6.1.4.1.4346.11.11.20 | NodeflWorkSecGateway | |||
| 1.3.6.1.4.1.4346.11.11.20.1 | NodeflWorkSecurityCtrl | |||
| 1.3.6.1.4.1.4346.11.11.20.1.5 | NodeflWorkSecurityCtrlClientAuth | |||
| 1.3.6.1.4.1.4346.11.11.20.1.5.3 | ScalarflWorkSecurityCtrlGenSecurityContext | read-write | current | If set this object to generate(2), a new security context will be generated. This inlcudes a new a server CA, a new server certificate and SSH-key. |
| 1.3.6.1.4.1.4346.11.11.21 | NodeflWorkTimeSynch | |||
| 1.3.6.1.4.1.4346.11.11.21.1 | NodeflWorkTimeSynchSntp | |||
| 1.3.6.1.4.1.4346.11.11.21.1.1 | ScalarflWorkTimeSynchSntpEnable | read-write | current | The status of the simple network time protocol. The value enable(2) activates sntp. The value disable(1) deactivates sntp. |
| 1.3.6.1.4.1.4346.11.11.21.1.2 | ScalarflWorkTimeSynchSntpMode | read-write | current | The mode the simple network time protocol runs in. unicast(1) for the unicast mode, broadcast(2) for the broadcast mode, manycast(3) for the manycast mode. |
| 1.3.6.1.4.1.4346.11.11.21.1.3 | ScalarflWorkTimeSynchSntpPollInterval | read-write | current | Size of the interval the server is polled. This value is used as an exponent of two, where the resulting value is the interval between synchronization messages… |
| 1.3.6.1.4.1.4346.11.11.21.1.4 | ScalarflWorkTimeSynchSntpServerIpAddress | read-write | current | Writing to this object sets the IP address of the first ntp or sntp server needed for time synchronization |
| 1.3.6.1.4.1.4346.11.11.21.1.5 | ScalarflWorkTimeSynchSntpBackupServerIpAddress | read-write | current | Writing to this object sets the IP address of the second ntp or sntp server which is used as backup for the first server. |
| 1.3.6.1.4.1.4346.11.11.21.1.6 | ScalarflWorkTimeSynchSntpBroadcastIpAddress | read-write | current | Writing to this object sets the broadcast IP address to locate local sntp or ntp servers in manycast mode and choose the best one. |
| 1.3.6.1.4.1.4346.11.11.21.1.7 | ScalarflWorkTimeSynchSntpStratum | read-only | current | Read out the current stratum value. |
| 1.3.6.1.4.1.4346.11.11.21.1.8 | ScalarflWorkTimeSynchSntpTime | read-only | current | Read out the current system time. |
| 1.3.6.1.4.1.4346.11.11.21.1.9 | ScalarflWorkTimeSynchSntpDate | read-only | current | Read out the current system date. |
| 1.3.6.1.4.1.4346.11.11.21.1.10 | ScalarflWorkTimeSynchSntpSeconds | read-only | current | Read out the current NTP seconds. |
| 1.3.6.1.4.1.4346.11.11.21.1.11 | ScalarflWorkTimeSynchSntpFractionalSeconds | read-only | current | Read out the current NTP fractional seconds. |
| 1.3.6.1.4.1.4346.11.11.21.1.12 | ScalarflWorkTimeSynchSntpUtcOffset | read-write | current | Hours to adjust the UTC time to the local time zone. |
| 1.3.6.1.4.1.4346.11.11.21.1.24 | ScalarflWorkTimeSynchSntpServerDesc | read-write | current | Writing to this object sets the description of the primary sntp server. The maximum size of the string is 255 characters. |
| 1.3.6.1.4.1.4346.11.11.21.1.25 | ScalarflWorkTimeSynchSntpBackupServerDesc | read-write | current | Writing to this object sets the description of the backup sntp server. The maximum size of the string is 255 characters. |
| 1.3.6.1.4.1.4346.11.11.21.1.26 | ScalarflWorkTimeSynchSntpServerName | read-write | current | Writing to this object sets the name of the primary sntp server. The maximum size of the string is 255 characters. |
| 1.3.6.1.4.1.4346.11.11.21.1.27 | ScalarflWorkTimeSynchSntpBackupServerName | read-write | current | Writing to this object sets the name of the backup sntp server. The maximum size of the string is 255 characters. |
| 1.3.6.1.4.1.4346.11.11.21.2 | NodeflWorkTimeSynchRTC | |||
| 1.3.6.1.4.1.4346.11.11.21.2.1 | ScalarflWorkTimeSynchRTCDateTime | read-write | current | The Date and Time stored in the Real Time Clock. To set Real Time Clock use Format: YYYY/MM/DD hh:mm:ss |
| 1.3.6.1.4.1.4346.11.11.21.2.2 | ScalarflWorkTimeSynchRTCSeconds | read-write | current | The Seconds stored in the Real Time Clock. |
| 1.3.6.1.4.1.4346.11.11.21.3 | NodeflWorkTimeSynchPTP | |||
| 1.3.6.1.4.1.4346.11.11.21.3.1 | TableflWorkTimeSynchPTPPortTable | not-accessible | current | Table of network ports with Precision time protocol informational or configuration objects. |
| 1.3.6.1.4.1.4346.11.11.21.3.1.1 | RowflWorkTimeSynchPTPPortEntry | not-accessible | current | An entry in the table, containing information of one network port concerning precistion time protocol. |
| 1.3.6.1.4.1.4346.11.11.21.3.1.1.1 | ColumnflWorkTimeSynchPTPPortIndex | read-only | current | This object identifies the port. This value is never greater then flWorkNetPortCapacity. |
| 1.3.6.1.4.1.4346.11.11.21.3.1.1.2 | ColumnflWorkTimeSynchPTPPortAdminStatus | read-write | current | Determines if the precision time protocol is fully enabled on this port or not. rxAndTx means that the protocol is operational on this port. rxOnly means that … |
| 1.3.6.1.4.1.4346.11.11.22 | NodeflWorkWlan | |||
| 1.3.6.1.4.1.4346.11.11.22.10 | ScalarflWorkWlanOpMode | read-write | current | Operational mode of the device. When operating as a transparent bridge, the device is acting like a layer2 bridge and is invisible to clients. |
| 1.3.6.1.4.1.4346.11.11.22.11 | ScalarflWorkWlanSetOnlyMode | read-write | current | Enabling this variable enables the set only mode of the FL WLAN AP/EC/DAP devices. In this mode, the automatic consistency check of the device configuration is… |
| 1.3.6.1.4.1.4346.11.11.22.12 | ScalarflWorkWlanCountry | read-write | current | Country setting of the device |
| 1.3.6.1.4.1.4346.11.11.22.20 | NodeflWorkWlanIf1 | |||
| 1.3.6.1.4.1.4346.11.11.22.20.1 | NodeflWorkWlanIf1Parameter | |||
| 1.3.6.1.4.1.4346.11.11.22.20.1.1 | ScalarflWorkWlanIf1ParamState | read-write | current | State of this interface. It may be enabled or disabled. |
| 1.3.6.1.4.1.4346.11.11.22.20.1.2 | ScalarflWorkWlanIf1ParamOpMode | read-write | current | This textual convention is used to distinguish the WIFI operation mode of a device. station: 0 access point (master): 1 single client bridge (scb): 2 multi cli… |
| 1.3.6.1.4.1.4346.11.11.22.20.1.3 | ScalarflWorkWlanIf1ParamSSID | read-write | current | SSID (Service Set Identifier) for this interface. An SSID can be up to 32 characters long. Only letters, digits and the special characters: '@!$%&/()=?{}[]+*~#… |
| 1.3.6.1.4.1.4346.11.11.22.20.1.4 | ScalarflWorkWlanIf1ParamMode | read-write | current | Operation mode of this interface. 1=802.11a, 2=802.11b. 3=802.11b/g, 4=802.11a/n and 5=802.11g/n for master only. |
| 1.3.6.1.4.1.4346.11.11.22.20.1.5 | ScalarflWorkWlanIf1ParamChannel | read-write | current | |
| 1.3.6.1.4.1.4346.11.11.22.20.1.6 | ScalarflWorkWlanIf1ParamOutdoor | read-write | current | If this interface is operating in 802.11a mode it must be distinguished between outdoor or indoor operation. |
| 1.3.6.1.4.1.4346.11.11.22.20.1.7 | ScalarflWorkWlanIf1AntennaOutput | read-write | current | Mask for rx/tx-Antenna X5(1),X6(2),X7(4). e.g. Set (6) to enable x6 and x7 for rx and tx. |
| 1.3.6.1.4.1.4346.11.11.22.20.1.8 | ScalarflWorkWlanIf1OutputPower | read-write | current | Set output power of WLAN interface. Current output power can be lower as defined due to regulatory limitations. |
| 1.3.6.1.4.1.4346.11.11.22.20.1.9 | ScalarflWorkWlanIf1STBC | read-write | current | Set output power of WLAN interface. Current output power can be lower as defined due to regulatory limitations. |
| 1.3.6.1.4.1.4346.11.11.22.20.1.10 | ScalarflWorkWlanIf1Fragmentation | read-write | current | Set fragmentation thresholds. |
| 1.3.6.1.4.1.4346.11.11.22.20.1.11 | ScalarflWorkWlanIf1RtsCts | read-write | current | Set RTS/CTS values. |
| 1.3.6.1.4.1.4346.11.11.22.20.1.12 | ScalarflWorkWlanIf1LongDistance | read-write | current | Set Parameters for long distance link (meter). This Parameter must be equal at master and station. Normal mode: 3000 meters. |
| 1.3.6.1.4.1.4346.11.11.22.20.1.13 | ScalarflWorkWlanIf1ScbMacAddress | read-write | current | Mac address of the Device in SCB Mode. |
| 1.3.6.1.4.1.4346.11.11.22.20.1.14 | ScalarflWorkWlanIf1ScbManMacMode | read-write | current | Mac-Address assignment method in SCB Mode disable(0) = Automatic mode. The device adopts the Mac-Address from the connected ethernet device. enable(1) = Manual… |
| 1.3.6.1.4.1.4346.11.11.22.20.1.15 | ScalarflWorkWlanIf1IAPP | read-write | current | 802.11f Inter Accesspoint Protocol (IAPP) disable(0) = IAPP disabled enable(1) = IAPP enabled |
| 1.3.6.1.4.1.4346.11.11.22.20.1.16 | NodeflWorkWlanIf1MachineAdmin | |||
| 1.3.6.1.4.1.4346.11.11.22.20.1.16.1 | ScalarflWorkWlanIf1MachineAdminSSID | read-write | current | SSID (Service Set Identifier) for the Machine Admin WLAN. An SSID can be up to 32 characters long. Only letters, digits and the special characters: '@!$%&/()=?… |
| 1.3.6.1.4.1.4346.11.11.22.20.1.16.2 | ScalarflWorkWlanIf1MachineAdminPsk | read-write | current | Passphrase for the Machine Admin SSID. NOTE: You should use a randomly generated alphanumeric sequence (up to 63 at least 8 characters) for maximum security. |
| 1.3.6.1.4.1.4346.11.11.22.20.1.16.3 | ScalarflWorkWlanIf1MachineAdminIp | read-write | current | The IPv4 address of the device which should be accessible vie the Machine Admin SSID |
| 1.3.6.1.4.1.4346.11.11.22.20.2 | NodeflWorkWlanIf1Security | |||
| 1.3.6.1.4.1.4346.11.11.22.20.2.1 | ScalarflWorkWlanIf1SecMode | read-write | current | Type of encryption of the wireless link. One of 'none', 'wpa-psk', 'wep64', 'wep128','wpa2-psk', 'wpa2-eap'. |
| 1.3.6.1.4.1.4346.11.11.22.20.2.2 | ScalarflWorkWlanIf1SecWpaEncryptionAlgorithm | read-write | current | Encryption algorithm. 1=TKIP is used on old hardware not supporting AES. 2=AES is more secure and faster on station roaming. 3=both. |
| 1.3.6.1.4.1.4346.11.11.22.20.2.3 | ScalarflWorkWlanIf1SecWpaPsk | read-write | current | Initial key for WPA encryption. NOTE: You should use a randomly generated alphanumeric sequence (up to 63 at least 8 characters) for maximum security. |
| 1.3.6.1.4.1.4346.11.11.22.20.2.4 | ScalarflWorkWlanIf1SecWepAuthType | read-write | current | 1=Open-System, 2=Shared-Key and 3=Automatic, the default. |
| 1.3.6.1.4.1.4346.11.11.22.20.2.5 | ScalarflWorkWlanIf1SecWepKeyEncoding | read-write | current | If this WEP passphrase is 'hex' or 'ascii'. |
| 1.3.6.1.4.1.4346.11.11.22.20.2.6 | ScalarflWorkWlanIf1SecWepKey | read-write | current | The WEP passphrase. |
| 1.3.6.1.4.1.4346.11.11.22.20.3 | NodeflWorkWlanIf1FastRoaming | |||
| 1.3.6.1.4.1.4346.11.11.22.20.3.1 | TableflWorkWlanIf1FastRoamingTable | not-accessible | current | Fast roaming table for all wlan interfaces. |
| 1.3.6.1.4.1.4346.11.11.22.20.3.1.1 | RowflWorkWlanIf1FastRoamingEntry | not-accessible | current | An entry (conceptual row) in the wlanFastRoamingFilterTable. |
| 1.3.6.1.4.1.4346.11.11.22.20.3.1.1.1 | ColumnflWorkWlanIf1FastRoamingEntryIdx | not-accessible | current | Index in the wlanFastRoamingFilterTable. |
| 1.3.6.1.4.1.4346.11.11.22.20.3.1.1.2 | ColumnflWorkWlanIf1FastRoamingEntryThreshold | read-write | current | SNR threshold when to this access point should be roamed. |
| 1.3.6.1.4.1.4346.11.11.22.20.3.1.1.3 | ColumnflWorkWlanIf1FastRoamingEntryChannel | read-write | current | Channel for this entry. 0 for any. |
| 1.3.6.1.4.1.4346.11.11.22.20.3.1.1.4 | ColumnflWorkWlanIf1FastRoamingEntryAddress | read-write | current | MAC address of this entry. |
| 1.3.6.1.4.1.4346.11.11.22.20.3.2 | ScalarflWorkWlanIf1FastRoamingEnabled | read-write | current | Enables the client its Modbus/TCP API. A PLC may then query the current position in the list or explicitly trigger fast roaming to any position. |
| 1.3.6.1.4.1.4346.11.11.22.20.3.3 | ScalarflWorkWlanIf1FastRoamToAP | read-write | current | Triggers immedeately fast roaming to the access point with the specified index. |
| 1.3.6.1.4.1.4346.11.11.22.20.4 | NodeflWorkWlanIf1Mcast | |||
| 1.3.6.1.4.1.4346.11.11.22.20.4.1 | ScalarflWorkWlanIf1McastEnhance | read-write | current | Sets the multicast enhancement mode to either tunneling, translating or adv_tunnel. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.2 | ScalarflWorkWlanIf1McastDrop | read-write | current | Allows different levels of dropping unknown or unneeded IP multicast traffic. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.3 | ScalarflWorkWlanIf1McastAutoAdd | read-write | current | Enabling this function leads to an automatic adding of newly connected WLAN clients to all already learned multicast groups. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.4 | ScalarflWorkWlanIf1McastAdvSnooping | read-write | current | By enabling this option also snooping of normal ongoing multicast traffic on the Ethernet interface is done to learn multicast groups. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.10 | TableflWorkWlanIf1McastTable | not-accessible | current | Table of all multicast groups learned for the WLAN interface via IGMP snooping. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.10.1 | RowflWorkWlanIf1McastEntry | not-accessible | current | An entry (conceptual row) in the flWorkWlanIf1McastTable. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.10.1.1 | ColumnflWorkWlanIf1McastTableEntryIdx | not-accessible | current | Index of the flWorkWlanIf1McastTable. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.10.1.2 | ColumnflWorkWlanIf1McastTableEntryGroup | read-only | current | Group MAC address learned via snooping. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.10.1.3 | ColumnflWorkWlanIf1McastTableEntryMember | read-only | current | MAC address of a member of the learned multicast group. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.10.1.4 | ColumnflWorkWlanIf1McastTableEntrySta | read-only | current | MAC address of the wlan station/client the member is connected to. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.20 | NodeflWorkWlanIf1McastDenyConfig | |||
| 1.3.6.1.4.1.4346.11.11.22.20.4.20.1 | ScalarflWorkWlanIf1McastDenyCreate | read-write | current | Add an IP Multicast Group to the Denylist. This multicast group is then exempted form special multicast handling. Get operation is meaningless, as this object … |
| 1.3.6.1.4.1.4346.11.11.22.20.4.20.2 | TableflWorkWlanIf1McastDenyTable | not-accessible | current | Table of IP multicast groups which are exempted from the special multicast enhancements. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.20.2.1 | RowflWorkWlanIf1McastDenyEntry | not-accessible | current | An entry (conceptual row) in the flWorkWlanIf1McastDenyTable. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.20.2.1.1 | ColumnflWorkWlanIf1McastDenyTableEntryIdx | not-accessible | current | Index of the flWorkWlanIf1McastTable. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.20.2.1.2 | ColumnflWorkWlanIf1McastDenyTableEntryGroup | read-only | current | IP group address which is exempted from special wlan multicast treatment. |
| 1.3.6.1.4.1.4346.11.11.22.20.4.20.2.1.3 | ColumnflWorkWlanIf1McastDenyTableEntryStatus | read-write | current | active(1) - This multicast group is active. destroy(6) - Set to this value to remove the multicast group from the list. |
| 1.3.6.1.4.1.4346.11.11.22.20.10 | TableflWorkWlanIf1StationsTable | not-accessible | current | Table of all associated stations to this interface. |
| 1.3.6.1.4.1.4346.11.11.22.20.10.1 | RowflWorkWlanIf1StationsEntry | not-accessible | current | An entry (conceptual row) in the wlanStationTable. |
| 1.3.6.1.4.1.4346.11.11.22.20.10.1.1 | ColumnflWorkWlanIf1StationEntryIdx | not-accessible | current | Index in the wlanStationTableIf1. |
| 1.3.6.1.4.1.4346.11.11.22.20.10.1.2 | ColumnflWorkWlanIf1StationEntrySNR | read-only | current | SNR of this station. |
| 1.3.6.1.4.1.4346.11.11.22.20.10.1.3 | ColumnflWorkWlanIf1StationEntryRate | read-only | current | TX-Rate of this station. |
| 1.3.6.1.4.1.4346.11.11.22.20.10.1.4 | ColumnflWorkWlanIf1StationEntryPower | read-only | current | TX-Power of this station. |
| 1.3.6.1.4.1.4346.11.11.22.20.10.1.5 | ColumnflWorkWlanIf1StationEntryAddress | read-only | current | MAC address of this station. |
| 1.3.6.1.4.1.4346.11.11.22.20.20 | TableflWorkWlanIf1VisibleAccessPointTable | not-accessible | current | Table of all VisibleAccessPoints to this interface. |
| 1.3.6.1.4.1.4346.11.11.22.20.20.1 | RowflWorkWlanIf1VisibleAccessPointEntry | not-accessible | current | An entry (conceptual row) in the wlanVisibleAccessPointTable. |
| 1.3.6.1.4.1.4346.11.11.22.20.20.1.1 | ColumnflWorkWlanIf1VisibleAccessPointEntryIdx | not-accessible | current | Index in the wlanVisibleAccessPointTableIf1. |
| 1.3.6.1.4.1.4346.11.11.22.20.20.1.2 | ColumnflWorkWlanIf1VisibleAccessPointEntrySNR | read-only | current | SNR of this visible access point. |
| 1.3.6.1.4.1.4346.11.11.22.20.20.1.3 | ColumnflWorkWlanIf1VisibleAccessPointEntryChannel | read-only | current | TX-Rate of this visible access point. |
| 1.3.6.1.4.1.4346.11.11.22.20.20.1.4 | ColumnflWorkWlanIf1VisibleAccessPointEntryPower | read-only | current | TX-Power of this visible access point. |
| 1.3.6.1.4.1.4346.11.11.22.20.20.1.5 | ColumnflWorkWlanIf1VisibleAccessPointEntrySSID | read-only | current | SSID of this visible access point. |
| 1.3.6.1.4.1.4346.11.11.22.20.20.1.6 | ColumnflWorkWlanIf1VisibleAccessPointEntrySecurity | read-only | current | Security of this visible access point. |
| 1.3.6.1.4.1.4346.11.11.22.20.20.1.7 | ColumnflWorkWlanIf1VisibleAccessPointEntryAddress | read-only | current | MAC address of this visible access point. |
| 1.3.6.1.4.1.4346.11.11.22.20.20.1.8 | ColumnflWorkWlanIf1VisibleAccessPointEntryConnected | read-only | current | This object shows, if the client is connected to this visible access point. |
| 1.3.6.1.4.1.4346.11.11.22.20.20.1.9 | ColumnflWorkWlanIf1VisibleAccessPointEntryRSSI | read-only | current | This object gives back the RSSI value, i.e. the signal strength of the visible AP. |
| 1.3.6.1.4.1.4346.11.11.22.20.20.1.10 | ColumnflWorkWlanIf1VisibleAccessPointEntryNoise | read-only | current | This value shows the noise floor for the connection to the visible AP. |
| 1.3.6.1.4.1.4346.11.11.22.30 | NodeflWorkWlanIf2 | |||
| 1.3.6.1.4.1.4346.11.11.22.30.1 | NodeflWorkWlanIf2Parameter | |||
| 1.3.6.1.4.1.4346.11.11.22.30.1.1 | ScalarflWorkWlanIf2ParamState | read-write | current | State of this interface. It may be enabled or disabled. |
| 1.3.6.1.4.1.4346.11.11.22.30.1.2 | ScalarflWorkWlanIf2ParamOpMode | read-write | current | This textual convention is used to distinguish the WIFI operation mode of a device. station: 0 access point (master): 1 single client bridge (scb): 2 multi cli… |
| 1.3.6.1.4.1.4346.11.11.22.30.1.3 | ScalarflWorkWlanIf2ParamSSID | read-write | current | SSID (Service Set Identifier) for this interface. An SSID can be up to 32 characters long. Only letters, digits and the special characters: '@!$%&/()=?{}[]+*~#… |
| 1.3.6.1.4.1.4346.11.11.22.30.1.4 | ScalarflWorkWlanIf2ParamMode | read-write | current | Operation mode of this interface. 1=802.11a, 2=802.11b. 3=802.11b/g, 4=802.11a/n and 5=802.11g/n for master only. |
| 1.3.6.1.4.1.4346.11.11.22.30.1.5 | ScalarflWorkWlanIf2ParamChannel | read-write | current | |
| 1.3.6.1.4.1.4346.11.11.22.30.1.6 | ScalarflWorkWlanIf2ParamOutdoor | read-write | current | If this interface is operating in 802.11a mode it must be distinguished between outdoor or indoor operation. |
| 1.3.6.1.4.1.4346.11.11.22.30.1.7 | ScalarflWorkWlanIf2AntennaOutput | read-write | current | Mask for rx/tx-Antenna X5(1),X6(2),X7(4). e.g. Set (6) to enable x6 and x7 for rx and tx. |
| 1.3.6.1.4.1.4346.11.11.22.30.1.8 | ScalarflWorkWlanIf2OutputPower | read-write | current | Set output power of WLAN interface. Current output power can be lower as defined due to regulatory limitations. |
| 1.3.6.1.4.1.4346.11.11.22.30.1.9 | ScalarflWorkWlanIf2STBC | read-write | current | Set output power of WLAN interface. Current output power can be lower as defined due to regulatory limitations. |
| 1.3.6.1.4.1.4346.11.11.22.30.1.10 | ScalarflWorkWlanIf2Fragmentation | read-write | current | Set fragmentation thresholds. |
| 1.3.6.1.4.1.4346.11.11.22.30.1.11 | ScalarflWorkWlanIf2RtsCts | read-write | current | Set RTS/CTS values. |
| 1.3.6.1.4.1.4346.11.11.22.30.1.12 | ScalarflWorkWlanIf2LongDistance | read-write | current | Set Parameters for long distance link (meter). This Parameter must be equal at master and station. Normal mode: 3000 meters. |
| 1.3.6.1.4.1.4346.11.11.22.30.1.13 | ScalarflWorkWlanIf2ScbMacAddress | read-write | current | Mac address of the Device in SCB Mode. |
| 1.3.6.1.4.1.4346.11.11.22.30.1.14 | ScalarflWorkWlanIf2ScbManMacMode | read-write | current | Mac-Address assignment method in SCB Mode disable(0) = Automatic mode. The device adopts the Mac-Address from the connected ethernet device. enable(1) = Manual… |
| 1.3.6.1.4.1.4346.11.11.22.30.1.15 | ScalarflWorkWlanIf2IAPP | read-write | current | 802.11f Inter Accesspoint Protocol (IAPP) disable(0) = IAPP disabled enable(1) = IAPP enabled |
| 1.3.6.1.4.1.4346.11.11.22.30.1.16 | NodeflWorkWlanIf2MachineAdmin | |||
| 1.3.6.1.4.1.4346.11.11.22.30.1.16.1 | ScalarflWorkWlanIf2MachineAdminSSID | read-write | current | SSID (Service Set Identifier) for the Machine Admin WLAN. An SSID can be up to 32 characters long. Only letters, digits and the special characters: '@!$%&/()=?… |
| 1.3.6.1.4.1.4346.11.11.22.30.1.16.2 | ScalarflWorkWlanIf2MachineAdminPsk | read-write | current | Passphrase for the Machine Admin SSID. NOTE: You should use a randomly generated alphanumeric sequence (up to 63 at least 8 characters) for maximum security. |
| 1.3.6.1.4.1.4346.11.11.22.30.1.16.3 | ScalarflWorkWlanIf2MachineAdminIp | read-write | current | The IPv4 address of the device which should be accessible vie the Machine Admin SSID |
| 1.3.6.1.4.1.4346.11.11.22.30.2 | NodeflWorkWlanIf2Security | |||
| 1.3.6.1.4.1.4346.11.11.22.30.2.1 | ScalarflWorkWlanIf2SecMode | read-write | current | Type of encryption of the wireless link. One of 'none', 'wpa-psk', 'wep64' or 'wep128'. |
| 1.3.6.1.4.1.4346.11.11.22.30.2.2 | ScalarflWorkWlanIf2SecWpaEncryptionAlgorithm | read-write | current | Encryption algorithm. 1=TKIP is used on old hardware not supporting AES. 2=AES is more secure and faster on station roaming. 3=both. |
| 1.3.6.1.4.1.4346.11.11.22.30.2.3 | ScalarflWorkWlanIf2SecWpaPsk | read-write | current | Initial key for WPA encryption. NOTE: You should use a randomly generated alphanumeric sequence (up to 63 at least 8 characters) for maximum security. |
| 1.3.6.1.4.1.4346.11.11.22.30.2.4 | ScalarflWorkWlanIf2SecWepAuthType | read-write | current | 1=Open-System, 2=Shared-Key and 3=Automatic, the default. |
| 1.3.6.1.4.1.4346.11.11.22.30.2.5 | ScalarflWorkWlanIf2SecWepKeyEncoding | read-write | current | If this WEP passphrase is 'hex' or 'ascii'. |
| 1.3.6.1.4.1.4346.11.11.22.30.2.6 | ScalarflWorkWlanIf2SecWepKey | read-write | current | The WEP passphrase. |
| 1.3.6.1.4.1.4346.11.11.22.40 | NodeflWorkWlanMacFilter | |||
| 1.3.6.1.4.1.4346.11.11.22.40.1 | TableflWorkWlanMacFilterTable | not-accessible | current | Mac filter table for all wlan interfaces. |
| 1.3.6.1.4.1.4346.11.11.22.40.1.1 | RowflWorkWlanMacFilterEntry | not-accessible | current | An entry (conceptual row) in the wlanMacFilterTable. |
| 1.3.6.1.4.1.4346.11.11.22.40.1.1.1 | ColumnflWorkWlanMacEntryIdx | not-accessible | current | Index in the wlanMacFilterTable. |
| 1.3.6.1.4.1.4346.11.11.22.40.1.1.2 | ColumnflWorkWlanMacEntryInterfaceName | read-write | current | Interface on which this entry should be applied. |
| 1.3.6.1.4.1.4346.11.11.22.40.1.1.3 | ColumnflWorkWlanMacEntryAction | read-write | current | If this entry is 'active' or 'inactive'. |
| 1.3.6.1.4.1.4346.11.11.22.40.1.1.4 | ColumnflWorkWlanMacEntryAddress | read-write | current | MAC address of this entry. |
| 1.3.6.1.4.1.4346.11.11.22.40.2 | ScalarflWorkWlanMacPolicyIf1 | read-write | current | Mac filter table policy for this interface. Block any not specified clients or allow all not specified clients on WLAN-1 |
| 1.3.6.1.4.1.4346.11.11.22.40.3 | ScalarflWorkWlanMacPolicyIf2 | read-write | current | Mac filter table policy for this interface. Block any not specified clients or allow all not specified clients on WLAN-2 |
| 1.3.6.1.4.1.4346.11.11.22.40.4 | ScalarflWorkWlanMacFilterSyslog | read-write | current | Enable syslog warnings for default policy of Mac filter table. |
| 1.3.6.1.4.1.4346.11.11.23 | NodeflWorkRouting | |||
| 1.3.6.1.4.1.4346.11.11.23.1 | NodeflWorkRoutingIp | |||
| 1.3.6.1.4.1.4346.11.11.23.1.1 | ScalarflWorkRoutingIpRoutingMode | read-write | current | Administratively enables/disables routing on the switch. |
| 1.3.6.1.4.1.4346.11.11.23.1.3 | TableflWorkRoutingIpInterfaceTable | not-accessible | current | |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1 | RowflWorkRoutingIpInterfaceEntry | not-accessible | current | |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.1 | ColumnflWorkRoutingIpInterfaceIfIndex | read-only | current | The IfIndex associated with this instance. |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.2 | ColumnflWorkRoutingIpInterfaceIpAddress | read-write | current | The IpAddress assigned to this interface. When setting this value, the value of flWorkRoutingIpInterfaceNetMask must be set at the same time. |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.3 | ColumnflWorkRoutingIpInterfaceNetMask | read-write | current | The NetMask assigned to this interface. When setting this value, the value of flWorkRoutingIpInterfaceIpAddress must be set at the same time. |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.4 | ColumnflWorkRoutingIpInterfaceClearIp | read-write | current | Sets the interfaces IpAddress and NetMask back to 0.0.0.0 |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.5 | ColumnflWorkRoutingIpInterfaceRoutingMode | read-write | current | Enables or disables routing for this interface. |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.6 | ColumnflWorkRoutingIpInterfaceProxyARPMode | read-write | current | Enables or disables Proxy ARP for this interface. |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.7 | ColumnflWorkRoutingIpInterfaceMtuValue | read-write | current | Configures the MTU value for this interface. If the value returned is 0 this interface is not enabled for routing. It is not valid to set this value to 0 if ro… |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.8 | ColumnflWorkRoutingIpInterfaceBandwidth | read-write | current | Configures the Bandwidth value for this interface. If the value returned is 0 bandwidth for this interface is not Configured. |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.9 | ColumnflWorkRoutingIpInterfaceUnnumberedIfIndex | read-only | current | If this object is non-zero, it indicates that the interface is unnumbered, and specifies which interface the address is borrowed from. |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.10 | ColumnflWorkRoutingIpInterfaceIcmpUnreachables | read-write | current | If this object is enable, it indicates that ICMP unreachables can be sent on this interface. |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.11 | ColumnflWorkRoutingIpInterfaceIcmpRedirects | read-write | current | If this object is enable and flWorkRoutingIpIcmpRedirectsMode is also enable ICMP Redirects can be sent on this interface. |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.12 | ColumnflWorkRoutingIpInterfaceManagementAccess | read-write | current | If this object is enable, Management Interfaces can be accessed via this Interface |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.13 | ColumnflWorkRoutingIpInterfaceAssignMode | read-write | current | this object contains the IP Assignment Mode of this Interface |
| 1.3.6.1.4.1.4346.11.11.23.1.3.1.14 | ColumnflWorkRoutingIpInterfaceMapIdx2IfTable | read-only | current | The mapping to the Interface Index used in MIB-2 ifTable. OID 1.3.6.1.2.1.2.2 |
| 1.3.6.1.4.1.4346.11.11.23.1.4 | TableflWorkRoutingIpRouterDiscoveryTable | not-accessible | current | There is no global administrative flag for router discovery. The global routing flag (flWorkRoutingIpRoutingMode) will be used for this purpose. If routing is … |
| 1.3.6.1.4.1.4346.11.11.23.1.4.1 | RowflWorkRoutingIpRouterDiscoveryEntry | not-accessible | current | |
| 1.3.6.1.4.1.4346.11.11.23.1.4.1.1 | ColumnflWorkRoutingIpRouterDiscoveryIfIndex | read-only | current | Interface Number to configure Router Discovery on. |
| 1.3.6.1.4.1.4346.11.11.23.1.4.1.2 | ColumnflWorkRoutingIpRouterDiscoveryAdvertiseMode | read-write | current | Enable or disable router discovery on the interface. |
| 1.3.6.1.4.1.4346.11.11.23.1.4.1.3 | ColumnflWorkRoutingIpRouterDiscoveryMaxAdvertisementInterval | read-write | current | Maximum time allowed between sending router advertisements from the interface. |
| 1.3.6.1.4.1.4346.11.11.23.1.4.1.4 | ColumnflWorkRoutingIpRouterDiscoveryMinAdvertisementInterval | read-write | current | Minimum time allowed between sending router advertisements from the interface. This value must be less than or equal to flWorkRoutingIpRouterDiscoveryMaxAdvert… |
| 1.3.6.1.4.1.4346.11.11.23.1.4.1.5 | ColumnflWorkRoutingIpRouterDiscoveryAdvertisementLifetime | read-write | current | Value of lifetime field of router advertsisement sent from the interface. This value must be greater than or equal to flWorkRoutingIpRouterDiscoveryMaxAdvertis… |
| 1.3.6.1.4.1.4346.11.11.23.1.4.1.6 | ColumnflWorkRoutingIpRouterDiscoveryPreferenceLevel | read-write | current | Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher t… |
| 1.3.6.1.4.1.4346.11.11.23.1.4.1.7 | ColumnflWorkRoutingIpRouterDiscoveryAdvertisementAddress | read-write | current | Address used when sending router advertisements from the interface. |
| 1.3.6.1.4.1.4346.11.11.23.1.5 | TableflWorkRoutingIpVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.4346.11.11.23.1.5.1 | RowflWorkRoutingIpVlanEntry | not-accessible | current | A Static VLAN for which routing can be enabled/disabled |
| 1.3.6.1.4.1.4346.11.11.23.1.5.1.1 | ColumnflWorkRoutingIpVlanId | read-only | current | The Vlan's Id. |
| 1.3.6.1.4.1.4346.11.11.23.1.5.1.2 | ColumnflWorkRoutingIpVlanIfIndex | read-only | current | The IfIndex associated with this VLAN. |
| 1.3.6.1.4.1.4346.11.11.23.1.5.1.3 | ColumnflWorkRoutingIpVlanRoutingStatus | read-create | current | Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing |
| 1.3.6.1.4.1.4346.11.11.23.1.6 | TableflWorkRoutingSecondaryAddressTable | not-accessible | current | Contains a list of secondary IP Addresses associated with an interface. |
| 1.3.6.1.4.1.4346.11.11.23.1.6.1 | RowflWorkRoutingSecondaryAddressEntry | not-accessible | current | A secondary IP Address for a given interface. This IP Address must not conflict with the IP Address configured in the flWorkRoutingIpInterfaceTable. |
| 1.3.6.1.4.1.4346.11.11.23.1.6.1.1 | ColumnflWorkRoutingSecondaryIpAddress | not-accessible | current | The Secondary IP Address assigned to this interface. |
| 1.3.6.1.4.1.4346.11.11.23.1.6.1.2 | ColumnflWorkRoutingSecondaryNetMask | read-create | current | The Secondary Net Mask assigned to this interface. This value must be set during creation, and can not be changed. |
| 1.3.6.1.4.1.4346.11.11.23.1.6.1.3 | ColumnflWorkRoutingSecondaryStatus | read-create | current | Creates a new entry in the Secondary Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given i… |
| 1.3.6.1.4.1.4346.11.11.23.1.7 | TableflWorkRoutingHelperAddressTable | not-accessible | current | Contains a list of Helper IP Addresses associated with an interface. |
| 1.3.6.1.4.1.4346.11.11.23.1.7.1 | RowflWorkRoutingHelperAddressEntry | not-accessible | current | A Helper IP Address for a given interface. |
| 1.3.6.1.4.1.4346.11.11.23.1.7.1.1 | ColumnflWorkRoutingHelperIpAddress | not-accessible | current | The Helper IP Address assigned to this interface. |
| 1.3.6.1.4.1.4346.11.11.23.1.7.1.2 | ColumnflWorkRoutingHelperStatus | read-create | current | Creates a new entry in the Helper Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given inte… |
| 1.3.6.1.4.1.4346.11.11.23.1.8 | NodeflWorkRoutingIpIcmpControl | |||
| 1.3.6.1.4.1.4346.11.11.23.1.8.1 | ScalarflWorkRoutingIpIcmpEchoReplyMode | read-write | current | Sets the administrative Echo Reply Mode. |
| 1.3.6.1.4.1.4346.11.11.23.1.8.2 | ScalarflWorkRoutingIpIcmpRedirectsMode | read-write | current | Sets the administrative Mode for sending Redirects. |
| 1.3.6.1.4.1.4346.11.11.23.1.8.3 | ScalarflWorkRoutingIpIcmpRateLimitInterval | read-write | current | Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit. |
| 1.3.6.1.4.1.4346.11.11.23.1.8.4 | ScalarflWorkRoutingIpIcmpRateLimitBurstSize | read-write | current | Specifies the number of tokens to be placed after timeout. |
| 1.3.6.1.4.1.4346.11.11.23.1.9 | TableflWorkRoutingStaticRouteTable | not-accessible | current | Contains a List of Static Routes. |
| 1.3.6.1.4.1.4346.11.11.23.1.9.1 | RowflWorkRoutingStaticRouteEntry | not-accessible | current | An entry in the table does contain information about an static route entry. |
| 1.3.6.1.4.1.4346.11.11.23.1.9.1.1 | ColumnflWorkRoutingStaticRouteTableIndex | read-only | current | Index of this entry. |
| 1.3.6.1.4.1.4346.11.11.23.1.9.1.2 | ColumnflWorkRoutingStaticRouteTableDestNetwork | read-write | current | Network IP Address of the destination Network. |
| 1.3.6.1.4.1.4346.11.11.23.1.9.1.3 | ColumnflWorkRoutingStaticRouteTableDestSubnetMask | read-write | current | Network Subnet Mask of the destination Network. |
| 1.3.6.1.4.1.4346.11.11.23.1.9.1.4 | ColumnflWorkRoutingStaticRouteTableNextHop | read-write | current | IP Address of the Next Hop Router to the Destination network. |
| 1.3.6.1.4.1.4346.11.11.23.1.9.1.5 | ColumnflWorkRoutingStaticRouteTablePreference | read-write | current | Preference value for the Route. |
| 1.3.6.1.4.1.4346.11.11.23.1.9.1.6 | ColumnflWorkRoutingStaticRouteTableActive | read-write | current | This object shows the status of this Route. |
| 1.3.6.1.4.1.4346.11.11.23.1.9.1.7 | ColumnflWorkRoutingStaticRouteTableStatus | read-create | current | Status of Routing Table Entry. active(1) - Routing Table entry is present createAndGo(4) - Adds static routing entry destroy(6) - Removes static routing entry |
| 1.3.6.1.4.1.4346.11.11.23.2 | NodeflWorkRoutingArp | |||
| 1.3.6.1.4.1.4346.11.11.23.2.1 | ScalarflWorkRoutingArpAgeoutTime | read-write | current | Configures the ARP entry ageout time in seconds. Allowable range: 15-21600 |
| 1.3.6.1.4.1.4346.11.11.23.2.2 | ScalarflWorkRoutingArpResponseTime | read-write | current | Configures the ARP request response timeout in seconds. Allowable range: 1-10 |
| 1.3.6.1.4.1.4346.11.11.23.2.3 | ScalarflWorkRoutingArpMaxRetries | read-write | current | Configures the ARP count of maximum request for retries. Allowable range: 0-10 |
| 1.3.6.1.4.1.4346.11.11.23.2.4 | ScalarflWorkRoutingArpCacheSize | read-write | current | Configures the ARP maximum number of entries in the cache. Allowable range is platform-specific. |
| 1.3.6.1.4.1.4346.11.11.23.2.5 | ScalarflWorkRoutingArpDynamicRenew | read-write | current | This indicates the current setting of ARP dynamic renew mode. |
| 1.3.6.1.4.1.4346.11.11.23.2.6 | ScalarflWorkRoutingArpTotalEntryCountCurrent | read-only | current | Current number of entries in the ARP cache. |
| 1.3.6.1.4.1.4346.11.11.23.2.7 | ScalarflWorkRoutingArpTotalEntryCountPeak | read-only | current | Peak number of entries recorded in the ARP cache over time. This value is restarted whenever the ARP cache size is changed. |
| 1.3.6.1.4.1.4346.11.11.23.2.8 | ScalarflWorkRoutingArpStaticEntryCountCurrent | read-only | current | Current number of configured static ARP entries. |
| 1.3.6.1.4.1.4346.11.11.23.2.9 | ScalarflWorkRoutingArpStaticEntryCountMax | read-only | current | Maximum number of configurable static ARP entries. |
| 1.3.6.1.4.1.4346.11.11.23.2.11 | TableflWorkRoutingLocalProxyArpTable | not-accessible | current | This table contains the per-interface configuration parameters for Local Proxy Arp. |
| 1.3.6.1.4.1.4346.11.11.23.2.11.1 | RowflWorkRoutingLocalProxyArpEntry | not-accessible | current | Represents a logical row in the flWorkRoutingLocalProxyArpTable |
| 1.3.6.1.4.1.4346.11.11.23.2.11.1.1 | ColumnflWorkRoutingLocalProxyArpMode | read-write | current | The Local Proxy Arp Mode for the interface. |
| 1.3.6.1.4.1.4346.11.11.23.2.12 | TableflWorkRoutingIntfArpTable | not-accessible | current | This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information. |
| 1.3.6.1.4.1.4346.11.11.23.2.12.1 | RowflWorkRoutingIntfArpEntry | not-accessible | current | |
| 1.3.6.1.4.1.4346.11.11.23.2.12.1.1 | ColumnflWorkRoutingIntfArpIpAddress | read-only | current | The Type of Address assigned to this interface. |
| 1.3.6.1.4.1.4346.11.11.23.2.12.1.2 | ColumnflWorkRoutingIntfArpIfIndex | read-create | current | The Associated IfIndex which identified the ARP Entry. This value must be specified for static ARP entries on an unnumbered interface |
| 1.3.6.1.4.1.4346.11.11.23.2.12.1.3 | ColumnflWorkRoutingIntfArpAge | read-only | current | This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries a… |
| 1.3.6.1.4.1.4346.11.11.23.2.12.1.4 | ColumnflWorkRoutingIntfArpMacAddress | read-create | current | The hardware MAX Address that each interface maps to. |
| 1.3.6.1.4.1.4346.11.11.23.2.12.1.5 | ColumnflWorkRoutingIntfArpType | read-only | current | The type of ARP entry. |
| 1.3.6.1.4.1.4346.11.11.23.2.12.1.6 | ColumnflWorkRoutingIntfArpStatus | read-write | current | The status of this ARP entry. Setting this object destroy will remove the entry. |
| 1.3.6.1.4.1.4346.11.11.23.3 | NodeflWorkRoutingVrrp | |||
| 1.3.6.1.4.1.4346.11.11.23.3.1 | ScalarflWorkRoutingVrrpAdminState | read-write | current | Sets the administrative mode of VRRP in the router. |
| 1.3.6.1.4.1.4346.11.11.23.3.2 | TableflWorkRoutingVrrpOperTable | not-accessible | current | Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of `flWorkRoutingVrrpOperEntry' items. |
| 1.3.6.1.4.1.4346.11.11.23.3.2.1 | RowflWorkRoutingVrrpOperEntry | not-accessible | current | An entry in the table contains operational priority that is associated with a virtual router. |
| 1.3.6.1.4.1.4346.11.11.23.3.2.1.1 | ColumnflWorkRoutingVrrpOperPriority | read-only | current | This object specifies the operational priority of the VRRP router. This value will be afftected by both the tracking process and the configured priority set by… |
| 1.3.6.1.4.1.4346.11.11.23.3.3 | TableflWorkRoutingVrrpTrackIntfTable | not-accessible | current | Tracking table for a VRRP router which consists of flWorkRoutingVrrpTrackIntfEntry items. |
| 1.3.6.1.4.1.4346.11.11.23.3.3.1 | RowflWorkRoutingVrrpTrackIntfEntry | not-accessible | current | An entry in the table contains tracked IP interfaces associated with a virtual router. |
| 1.3.6.1.4.1.4346.11.11.23.3.3.1.1 | ColumnflWorkRoutingVrrpTrackIntf | read-create | current | This object specifies the interface to be tracked. |
| 1.3.6.1.4.1.4346.11.11.23.3.3.1.2 | ColumnflWorkRoutingVrrpTrackIfPrioDec | read-create | current | This object specifies the decrement priority of the VRRP router. |
| 1.3.6.1.4.1.4346.11.11.23.3.3.1.3 | ColumnflWorkRoutingVrrpTrackIfState | read-only | current | This object specifies the IP state of the tracked interface for the virtual router. |
| 1.3.6.1.4.1.4346.11.11.23.3.3.1.4 | ColumnflWorkRoutingVrrpTrackIfStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this obj… |
| 1.3.6.1.4.1.4346.11.11.23.3.4 | TableflWorkRoutingVrrpTrackRouteTable | not-accessible | current | Tracking table for a VRRP router which consists of a 'flWorkRoutingVrrpTrackRouteEntry' items. |
| 1.3.6.1.4.1.4346.11.11.23.3.4.1 | RowflWorkRoutingVrrpTrackRouteEntry | not-accessible | current | An entry in the table contains tracked Routes associated with a virtual router. |
| 1.3.6.1.4.1.4346.11.11.23.3.4.1.1 | ColumnflWorkRoutingVrrpTrackRtPfx | read-create | current | This object specifies the prefix of the route to be tracked. |
| 1.3.6.1.4.1.4346.11.11.23.3.4.1.2 | ColumnflWorkRoutingVrrpTrackRtPfxLen | read-create | current | This object specifies prefix length of the route to be tracked. |
| 1.3.6.1.4.1.4346.11.11.23.3.4.1.3 | ColumnflWorkRoutingVrrpTrackRtPrioDec | read-create | current | This object specifies the decrement priority of the VRRP router. |
| 1.3.6.1.4.1.4346.11.11.23.3.4.1.4 | ColumnflWorkRoutingVrrpTrackRtReachable | read-only | current | This object specifies the reachability of the tracked route. |
| 1.3.6.1.4.1.4346.11.11.23.3.4.1.5 | ColumnflWorkRoutingVrrpTrackRtStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this obj… |
| 1.3.6.1.4.1.4346.11.11.23.3.5 | ScalarflWorkRoutingVrrpIcmpEcho | read-write | current | Sets and shows the ICMP ECHO state of VRRP in the router. If enabled, the router will answer to ICMP Echo requestes issued to a virtual router IP address if th… |
| 1.3.6.1.4.1.4346.11.11.23.4 | NodeflWorkRoutingRip | |||
| 1.3.6.1.4.1.4346.11.11.23.4.1 | ScalarflWorkRoutingRipAdminState | read-write | current | Sets the administrative mode of RIP in the router. |
| 1.3.6.1.4.1.4346.11.11.23.4.2 | ScalarflWorkRoutingRipSplitHorizonMode | read-write | current | Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split… |
| 1.3.6.1.4.1.4346.11.11.23.4.3 | ScalarflWorkRoutingRipAutoSummaryMode | read-write | current | Sets the RIP auto summarization mode in the router. A value of enable(1) means that routes advertized by this RIP router are combined, or summarized, whenever … |
| 1.3.6.1.4.1.4346.11.11.23.4.4 | ScalarflWorkRoutingRipHostRoutesAcceptMode | read-write | current | Sets the RIP host route acceptance mode in the router. A value of enable(1) means that host routes advertized to this RIP router will be accepted (learned) int… |
| 1.3.6.1.4.1.4346.11.11.23.4.5 | ScalarflWorkRoutingRipDefaultMetric | read-write | current | Default metric of redistributed routes, when RIP redistributes from other protocols. |
| 1.3.6.1.4.1.4346.11.11.23.4.6 | ScalarflWorkRoutingRipDefaultMetricConfigured | read-write | current | Flag to determine whether RIP default-metric is configured or not. |
| 1.3.6.1.4.1.4346.11.11.23.4.7 | ScalarflWorkRoutingRipDefaultInfoOriginate | read-write | current | Flag to determine, whether RIP can advertise a default-route learned from another protocol. |
| 1.3.6.1.4.1.4346.11.11.23.4.8 | TableflWorkRoutingRipRouteRedistTable | not-accessible | current | This table contains the MIB objects required to configure route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be a… |
| 1.3.6.1.4.1.4346.11.11.23.4.8.1 | RowflWorkRoutingRipRouteRedistEntry | not-accessible | current | |
| 1.3.6.1.4.1.4346.11.11.23.4.8.1.1 | ColumnflWorkRoutingRipRouteRedistSource | read-only | current | Source route, from which RIP can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry. |
| 1.3.6.1.4.1.4346.11.11.23.4.8.1.2 | ColumnflWorkRoutingRipRouteRedistMode | read-write | current | User enabels/disables route-redistribution for a particular source protocol. |
| 1.3.6.1.4.1.4346.11.11.23.4.8.1.3 | ColumnflWorkRoutingRipRouteRedistMetric | read-write | current | Metric used for redistributing a particular source protocol route into RIP. |
| 1.3.6.1.4.1.4346.11.11.23.4.8.1.4 | ColumnflWorkRoutingRipRouteRedistMetricConfigured | read-write | current | Flag to determine whether RIP redistribute-metric is configured or not. |
| 1.3.6.1.4.1.4346.11.11.23.4.8.1.5 | ColumnflWorkRoutingRipRouteRedistMatchInternal | read-write | current | If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.4346.11.11.23.4.8.1.6 | ColumnflWorkRoutingRipRouteRedistMatchExternal1 | read-write | current | If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.4346.11.11.23.4.8.1.7 | ColumnflWorkRoutingRipRouteRedistMatchExternal2 | read-write | current | If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.4346.11.11.23.4.8.1.8 | ColumnflWorkRoutingRipRouteRedistMatchNSSAExternal1 | read-write | current | If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.4346.11.11.23.4.8.1.9 | ColumnflWorkRoutingRipRouteRedistMatchNSSAExternal2 | read-write | current | If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.4346.11.11.23.4.8.1.10 | ColumnflWorkRoutingRipRouteRedistDistList | read-write | current | Access-list number of the access-list, which filters routes received from a source-protocol. |
| 1.3.6.1.4.1.4346.11.11.23.4.8.1.11 | ColumnflWorkRoutingRipRouteRedistDistListConfigured | read-write | current | Flag to determine whether Access-list is configured or not. |
| 1.3.6.1.4.1.4346.11.11.23.4.9 | TableflWorkRoutingRip2IfConfTable | not-accessible | current | A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable in the RIPv2-MIB. |
| 1.3.6.1.4.1.4346.11.11.23.4.9.1 | RowflWorkRoutingRip2IfConfEntry | not-accessible | current | A Single Routing Domain in a single Subnet. Augments rip2IfConfEntry in RIPv2-MIB. |
| 1.3.6.1.4.1.4346.11.11.23.4.9.1.1 | ColumnflWorkRoutingRip2IfConfAuthKeyId | read-create | current | The identifier for the authentication key used on this interface. This field is only meaningful when the RIPv2-MIB rip2IfConfAuthType is md5(3); otherwise, the… |
| 1.3.6.1.4.1.4346.11.11.23.5 | NodeflWorkRoutingOspf | |||
| 1.3.6.1.4.1.4346.11.11.23.5.1 | ScalarflWorkRoutingOspfDefaultMetric | read-write | current | Default metric of redistributed routes, when OSPF redistributes from other protocols. |
| 1.3.6.1.4.1.4346.11.11.23.5.2 | ScalarflWorkRoutingOspfDefaultMetricConfigured | read-write | current | Flag to determine whether OSPF default-metric is configured or not. |
| 1.3.6.1.4.1.4346.11.11.23.5.3 | ScalarflWorkRoutingOspfDefaultInfoOriginate | read-write | current | Flag to determine, whether OSPF can advertise a default-route learned from another protocol. |
| 1.3.6.1.4.1.4346.11.11.23.5.4 | ScalarflWorkRoutingOspfDefaultInfoOriginateAlways | read-write | current | When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding … |
| 1.3.6.1.4.1.4346.11.11.23.5.5 | ScalarflWorkRoutingOspfDefaultInfoOriginateMetric | read-write | current | Metric of the default route,which OSPF advertises when learned from other protocol. |
| 1.3.6.1.4.1.4346.11.11.23.5.6 | ScalarflWorkRoutingOspfDefaultInfoOriginateMetricConfigured | read-write | current | Flag to determine whether OSPF default-info originate metric is configured or not. |
| 1.3.6.1.4.1.4346.11.11.23.5.7 | ScalarflWorkRoutingOspfDefaultInfoOriginateMetricType | read-write | current | Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2). |
| 1.3.6.1.4.1.4346.11.11.23.5.8 | TableflWorkRoutingOspfRouteRedistTable | not-accessible | current | This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be… |
| 1.3.6.1.4.1.4346.11.11.23.5.8.1 | RowflWorkRoutingOspfRouteRedistEntry | not-accessible | current | |
| 1.3.6.1.4.1.4346.11.11.23.5.8.1.1 | ColumnflWorkRoutingOspfRouteRedistSource | read-only | current | Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry. |
| 1.3.6.1.4.1.4346.11.11.23.5.8.1.2 | ColumnflWorkRoutingOspfRouteRedistMode | read-write | current | User enabels/disables route-redistribution for a particular source protocol. |
| 1.3.6.1.4.1.4346.11.11.23.5.8.1.3 | ColumnflWorkRoutingOspfRouteRedistMetric | read-write | current | Metric used for redistributing a particular source protocol route into OSPF. |
| 1.3.6.1.4.1.4346.11.11.23.5.8.1.4 | ColumnflWorkRoutingOspfRouteRedistMetricConfigured | read-write | current | Flag to determine whether OSPF redistribute-metric is configured or not. |
| 1.3.6.1.4.1.4346.11.11.23.5.8.1.5 | ColumnflWorkRoutingOspfRouteRedistMetricType | read-write | current | Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2). |
| 1.3.6.1.4.1.4346.11.11.23.5.8.1.6 | ColumnflWorkRoutingOspfRouteRedistTag | read-write | current | It specifies the tag field in routes redistributed by OSPF. |
| 1.3.6.1.4.1.4346.11.11.23.5.8.1.7 | ColumnflWorkRoutingOspfRouteRedistSubnets | read-write | current | If this value is false, then OSPF will not redistribute subnetted routes. |
| 1.3.6.1.4.1.4346.11.11.23.5.8.1.8 | ColumnflWorkRoutingOspfRouteRedistDistList | read-write | current | Access-list number of the access-list, which filters routes received from a source-protocol. |
| 1.3.6.1.4.1.4346.11.11.23.5.8.1.9 | ColumnflWorkRoutingOspfRouteRedistDistListConfigured | read-write | current | Flag to determine whether Access-list is configured or not. |
| 1.3.6.1.4.1.4346.11.11.23.5.9 | TableflWorkRoutingOspfIfTable | not-accessible | current | The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB. |
| 1.3.6.1.4.1.4346.11.11.23.5.9.1 | RowflWorkRoutingOspfIfEntry | not-accessible | current | The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB. |
| 1.3.6.1.4.1.4346.11.11.23.5.9.1.1 | ColumnflWorkRoutingOspfIfAuthKeyId | read-create | current | The identifier for the authentication key used on this interface. This field is only meaningful when the OSPF-MIB ospfIfAuthType is md5(2); otherwise, the valu… |
| 1.3.6.1.4.1.4346.11.11.23.5.9.1.2 | ColumnflWorkRoutingOspfIfIpMtuIgnoreFlag | read-write | current | Configures the IP MTU Ignore Flag value for this OSPF interface. |
| 1.3.6.1.4.1.4346.11.11.23.5.9.1.3 | ColumnflWorkRoutingOspfIfPassiveMode | read-write | current | Flag to determine whether the interface is passive. A passive interface will not participate in the OSPF adjacency formation. |
| 1.3.6.1.4.1.4346.11.11.23.5.10 | TableflWorkRoutingOspfVirtIfTable | not-accessible | current | Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB. |
| 1.3.6.1.4.1.4346.11.11.23.5.10.1 | RowflWorkRoutingOspfVirtIfEntry | not-accessible | current | Information about a single Virtual Interface. Augments ospfVirtIfEntry in OSPF-MIB. |
| 1.3.6.1.4.1.4346.11.11.23.5.10.1.1 | ColumnflWorkRoutingOspfVirtIfAuthKeyId | read-create | current | The identifier for the authentication key used on this virtual interface. This field is only meaningful when the OSPF-MIB ospfVirtIfAuthType is md5(2); otherwi… |
| 1.3.6.1.4.1.4346.11.11.23.5.11 | ScalarflWorkRoutingOspfRFC1583CompatibilityMode | read-write | current | From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'e… |
| 1.3.6.1.4.1.4346.11.11.23.5.12 | ScalarflWorkRoutingOspfSpfDelayTime | read-write | current | Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. It can be an integer from 0 to 65535. The default t… |
| 1.3.6.1.4.1.4346.11.11.23.5.13 | ScalarflWorkRoutingOspfSpfHoldTime | read-write | current | Minimum time (in seconds) between two consecutive SPF calculations. It can be an integer from 0 to 65535. The default time is 10 seconds. A value of 0 means th… |
| 1.3.6.1.4.1.4346.11.11.23.5.14 | ScalarflWorkRoutingOspfAutoCostRefBw | read-write | current | Auto cost refernece bandwidth of the router interfaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is… |
| 1.3.6.1.4.1.4346.11.11.23.5.15 | ScalarflWorkRoutingOspfOpaqueLsaSupport | read-write | current | The router's support for Opaque LSA types. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. |
| 1.3.6.1.4.1.4346.11.11.23.5.16 | TableflWorkRoutingOspfAreaOpaqueLsdbTable | not-accessible | current | The OSPF Process's Area Link State Database (LSDB). The LSDB contains type-10 Link State Advertisements from throughout the areas that the device is attached t… |
| 1.3.6.1.4.1.4346.11.11.23.5.16.1 | RowflWorkRoutingOspfAreaOpaqueLsdbEntry | not-accessible | current | A single AreaOpaque Link State Advertisement. |
| 1.3.6.1.4.1.4346.11.11.23.5.16.1.1 | ColumnflWorkRoutingOspfAreaOpaqueLsdbAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.4346.11.11.23.5.16.1.2 | ColumnflWorkRoutingOspfAreaOpaqueLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.4.1.4346.11.11.23.5.16.1.3 | ColumnflWorkRoutingOspfAreaOpaqueLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.4346.11.11.23.5.16.1.4 | ColumnflWorkRoutingOspfAreaOpaqueLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4346.11.11.23.5.16.1.5 | ColumnflWorkRoutingOspfAreaOpaqueLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.4.1.4346.11.11.23.5.16.1.6 | ColumnflWorkRoutingOspfAreaOpaqueLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.4346.11.11.23.5.16.1.7 | ColumnflWorkRoutingOspfAreaOpaqueLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4346.11.11.23.5.16.1.8 | ColumnflWorkRoutingOspfAreaOpaqueLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size |
| 1.3.6.1.4.1.4346.11.11.23.5.17 | TableflWorkRoutingOspfLocalLsdbTable | not-accessible | current | The OSPF Process's Link-Local Link State Database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only Link-Local… |
| 1.3.6.1.4.1.4346.11.11.23.5.17.1 | RowflWorkRoutingOspfLocalLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.4346.11.11.23.5.17.1.1 | ColumnflWorkRoutingOspfLocalLsdbIpAddress | read-only | current | The IP Address of the interface from which the LSA was received if the interface is numbered. |
| 1.3.6.1.4.1.4346.11.11.23.5.17.1.2 | ColumnflWorkRoutingOspfLocalLsdbAddressLessIf | read-only | current | The Interface Index of the interface from which the LSA was received if the interface is unnumbered. |
| 1.3.6.1.4.1.4346.11.11.23.5.17.1.3 | ColumnflWorkRoutingOspfLocalLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.4346.11.11.23.5.17.1.4 | ColumnflWorkRoutingOspfLocalLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being… |
| 1.3.6.1.4.1.4346.11.11.23.5.17.1.5 | ColumnflWorkRoutingOspfLocalLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4346.11.11.23.5.17.1.6 | ColumnflWorkRoutingOspfLocalLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.4.1.4346.11.11.23.5.17.1.7 | ColumnflWorkRoutingOspfLocalLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.4346.11.11.23.5.17.1.8 | ColumnflWorkRoutingOspfLocalLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4346.11.11.23.5.17.1.9 | ColumnflWorkRoutingOspfLocalLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size. |
| 1.3.6.1.4.1.4346.11.11.23.5.18 | TableflWorkRoutingOspfAsLsdbTable | not-accessible | current | The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is … |
| 1.3.6.1.4.1.4346.11.11.23.5.18.1 | RowflWorkRoutingOspfAsLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.4346.11.11.23.5.18.1.1 | ColumnflWorkRoutingOspfAsLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.4346.11.11.23.5.18.1.2 | ColumnflWorkRoutingOspfAsLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.4346.11.11.23.5.18.1.3 | ColumnflWorkRoutingOspfAsLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4346.11.11.23.5.18.1.4 | ColumnflWorkRoutingOspfAsLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.4.1.4346.11.11.23.5.18.1.5 | ColumnflWorkRoutingOspfAsLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.4346.11.11.23.5.18.1.6 | ColumnflWorkRoutingOspfAsLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4346.11.11.23.5.18.1.7 | ColumnflWorkRoutingOspfAsLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.4346.11.11.23.5.19 | ScalarflWorkRoutingOspfDefaultPassiveMode | read-write | current | Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation. |
| 1.3.6.1.4.1.4346.11.11.23.6 | NodeflWorkRoutingLoopback | |||
| 1.3.6.1.4.1.4346.11.11.23.6.1 | TableflWorkRoutingLoopbackTable | not-accessible | current | A summary table of the Loopback instances |
| 1.3.6.1.4.1.4346.11.11.23.6.1.1 | RowflWorkRoutingLoopbackEntry | not-accessible | current | |
| 1.3.6.1.4.1.4346.11.11.23.6.1.1.1 | ColumnflWorkRoutingLoopbackID | not-accessible | current | The Loopback ID is associated with Internal Interface number which will be generated when we create a loopback. |
| 1.3.6.1.4.1.4346.11.11.23.6.1.1.2 | ColumnflWorkRoutingLoopbackIfIndex | read-only | current | This is external interface associated with inetrnal interface of loopback. The Loopback ID is associated with Internal Interface number which will be generated… |
| 1.3.6.1.4.1.4346.11.11.23.6.1.1.3 | ColumnflWorkRoutingLoopbackIPAddress | read-write | current | The IP Address configured for the respective loopback |
| 1.3.6.1.4.1.4346.11.11.23.6.1.1.4 | ColumnflWorkRoutingLoopbackIPSubnet | read-write | current | The Subnet mask configured for the respective loopback |
| 1.3.6.1.4.1.4346.11.11.23.6.1.1.5 | ColumnflWorkRoutingLoopbackStatus | read-create | current | Status of this instance. The rows can be added/deleted in the table by setting createAndGo/destroy respectively active(1) - this loopback instance is active cr… |
| 1.3.6.1.4.1.4346.11.11.23.7 | NodeflWorkRoutingNAT | |||
| 1.3.6.1.4.1.4346.11.11.23.7.1 | NodeflWorkRoutingNATIntfCtrl | |||
| 1.3.6.1.4.1.4346.11.11.23.7.1.1 | TableflWorkRoutingNATIntfCtrlTable | not-accessible | current | Contains a List of NAT Interface configuration parameters. |
| 1.3.6.1.4.1.4346.11.11.23.7.1.1.1 | RowflWorkRoutingNATIntfCtrlEntry | not-accessible | current | An entry in the table does contain information about NAT Interface control parameters. |
| 1.3.6.1.4.1.4346.11.11.23.7.1.1.1.1 | ColumnflWorkRoutingNATIntfCtrlIntfIndex | read-only | current | Interface Index of this entry. |
| 1.3.6.1.4.1.4346.11.11.23.7.1.1.1.2 | ColumnflWorkRoutingNATIntfCtrlIntfMode | read-write | current | NAT Mode of this Interface. |
| 1.3.6.1.4.1.4346.11.11.23.7.2 | NodeflWorkRoutingNATIntfForwarding | |||
| 1.3.6.1.4.1.4346.11.11.23.7.2.1 | TableflWorkRoutingNATIntfForwardingTable | not-accessible | current | Contains a List of Interface Port Forwarding rules. |
| 1.3.6.1.4.1.4346.11.11.23.7.2.1.1 | RowflWorkRoutingNATIntfForwardingEntry | not-accessible | current | An entry in the table does contain information about Interface Port Forwarding rules. |
| 1.3.6.1.4.1.4346.11.11.23.7.2.1.1.1 | ColumnflWorkRoutingNATIntfForwardingIntfIndex | read-only | current | Interface Index of this entry. |
| 1.3.6.1.4.1.4346.11.11.23.7.2.1.1.2 | ColumnflWorkRoutingNATIntfForwardingTableIndex | read-only | current | Table Index of this entry. |
| 1.3.6.1.4.1.4346.11.11.23.7.2.1.1.3 | ColumnflWorkRoutingNATIntfForwardingTableProtocol | read-write | current | Protocol of the connection to forward. |
| 1.3.6.1.4.1.4346.11.11.23.7.2.1.1.4 | ColumnflWorkRoutingNATIntfForwardingTableDirection | read-write | current | direction for the Forwarding rule. |
| 1.3.6.1.4.1.4346.11.11.23.7.2.1.1.5 | ColumnflWorkRoutingNATIntfForwardingTableInboundAddr | read-write | current | Inbound IP Address. |
| 1.3.6.1.4.1.4346.11.11.23.7.2.1.1.6 | ColumnflWorkRoutingNATIntfForwardingTableInboundPort | read-write | current | Inbound Port Number. |
| 1.3.6.1.4.1.4346.11.11.23.7.2.1.1.7 | ColumnflWorkRoutingNATIntfForwardingTableOutboundAddr | read-write | current | Outbound IP Address. |
| 1.3.6.1.4.1.4346.11.11.23.7.2.1.1.8 | ColumnflWorkRoutingNATIntfForwardingTableOutboundPort | read-write | current | Outbound Port Number. |
| 1.3.6.1.4.1.4346.11.11.23.7.2.1.1.9 | ColumnflWorkRoutingNATIntfForwardingTableActive | read-write | current | This object shows the status of this forwarding entry. |
| 1.3.6.1.4.1.4346.11.11.23.7.2.1.1.10 | ColumnflWorkRoutingNATIntfForwardingTableStatus | read-create | current | Status of NAT Forwarding Table entry. active(1) - NAT Forwarding Table entry is present createAndGo(4) - Adds NAT Forwarding entry destroy(6) - Removes NAT For… |
| 1.3.6.1.4.1.4346.11.11.23.7.3 | NodeflWorkRoutingNATIntf1to1 | |||
| 1.3.6.1.4.1.4346.11.11.23.7.3.1 | TableflWorkRoutingNATIntf1to1Table | not-accessible | current | Contains a List of Interface 1:1 NAT rules. |
| 1.3.6.1.4.1.4346.11.11.23.7.3.1.1 | RowflWorkRoutingNATIntf1to1Entry | not-accessible | current | An entry in the table does contain information about 1:1 NAT rules. |
| 1.3.6.1.4.1.4346.11.11.23.7.3.1.1.1 | ColumnflWorkRoutingNATIntf1to1IntfIndex | read-only | current | Interface Index of this entry. |
| 1.3.6.1.4.1.4346.11.11.23.7.3.1.1.2 | ColumnflWorkRoutingNATIntf1to1TableIndex | read-only | current | Table Index of this entry. |
| 1.3.6.1.4.1.4346.11.11.23.7.3.1.1.3 | ColumnflWorkRoutingNATIntf1to1TableExternalNetwork | read-write | current | IP Address of the external Network or Device Address. |
| 1.3.6.1.4.1.4346.11.11.23.7.3.1.1.4 | ColumnflWorkRoutingNATIntf1to1TableInternalNetwork | read-write | current | IP Address of the internal Network or Device Address. |
| 1.3.6.1.4.1.4346.11.11.23.7.3.1.1.5 | ColumnflWorkRoutingNATIntf1to1TableRange | read-write | current | Subnet Bits of the network. Examples: Class C Network: 255.255.255.0 ->24 Class B Network: 255.255.0.0 ->16 Class A Network: 255.0.0.0 ->8 Single Device: ->32 |
| 1.3.6.1.4.1.4346.11.11.23.7.3.1.1.6 | ColumnflWorkRoutingNATIntf1to1TableActive | read-write | current | This object shows the status of this 1:1 Nat entry. |
| 1.3.6.1.4.1.4346.11.11.23.7.3.1.1.7 | ColumnflWorkRoutingNATIntf1to1TableStatus | read-create | current | Status of NAT 1-to-1 Table entry. active(1) - NAT 1-to-1 Table entry is present createAndGo(4) - Adds NAT 1-to-1 entry destroy(6) - Removes NAT 1-to-1 entry |
| 1.3.6.1.4.1.4346.11.11.23.7.4 | NodeflWorkRoutingNATIntfVirtual | |||
| 1.3.6.1.4.1.4346.11.11.23.7.4.1 | TableflWorkRoutingNATIntfVirtualTable | not-accessible | current | Contains a List of Interface Virtual NAT rules. |
| 1.3.6.1.4.1.4346.11.11.23.7.4.1.1 | RowflWorkRoutingNATIntfVirtualEntry | not-accessible | current | An entry in the table does contain information about Virtual NAT rules. |
| 1.3.6.1.4.1.4346.11.11.23.7.4.1.1.1 | ColumnflWorkRoutingNATIntfVirtualIntfIndex | read-only | current | Interface Index of this entry. |
| 1.3.6.1.4.1.4346.11.11.23.7.4.1.1.2 | ColumnflWorkRoutingNATIntfVirtualTableIndex | read-only | current | Table Index of this entry. |
| 1.3.6.1.4.1.4346.11.11.23.7.4.1.1.3 | ColumnflWorkRoutingNATIntfVirtualTableVirtualNetwork | read-write | current | Start IP Address of the Virtual Network. |
| 1.3.6.1.4.1.4346.11.11.23.7.4.1.1.4 | ColumnflWorkRoutingNATIntfVirtualTableInternalNetwork | read-write | current | Start IP Address of the Internal Network. |
| 1.3.6.1.4.1.4346.11.11.23.7.4.1.1.5 | ColumnflWorkRoutingNATIntfVirtualTableRange | read-write | current | Subnet Bits of the network. Examples: Class C Network: 255.255.255.0 ->24 Class B Network: 255.255.0.0 ->16 Class A Network: 255.0.0.0 ->8 Single Device: ->32 |
| 1.3.6.1.4.1.4346.11.11.25 | NodeflWorkCip | |||
| 1.3.6.1.4.1.4346.11.11.25.1 | NodeflWorkCipInfo | |||
| 1.3.6.1.4.1.4346.11.11.25.1.1 | ScalarflWorkCipActiveIOConns | read-only | current | Gets the number of currently active CIP I/O Connections. |
| 1.3.6.1.4.1.4346.11.11.25.1.2 | ScalarflWorkCipActiveExpMsgConns | read-only | current | Gets the number of currently active CIP Explicit Message Connections. |
| 1.3.6.1.4.1.4346.11.11.25.1.3 | ScalarflWorkCipActiveMcastGroups | read-only | current | Gets the number of currently active multicast groups. |
| 1.3.6.1.4.1.4346.11.11.25.1.4 | ScalarflWorkCipOpenRequestsRcvd | read-only | current | Gets the number of open connection requests received after device startup. |
| 1.3.6.1.4.1.4346.11.11.25.1.5 | ScalarflWorkCipOpenResourceRejects | read-only | current | Gets the number of open connection requests rejected due to lack of resource. |
| 1.3.6.1.4.1.4346.11.11.25.1.6 | ScalarflWorkCipOpenFormatRejects | read-only | current | Gets the number of open connection requests rejected due to bad format. |
| 1.3.6.1.4.1.4346.11.11.25.1.7 | ScalarflWorkCipOpenOtherRejects | read-only | current | Gets the number of open connection requests rejected due to other reasons. |
| 1.3.6.1.4.1.4346.11.11.25.1.8 | ScalarflWorkCipCloseRequests | read-only | current | Gets the number of close connection requests received after device startup. |
| 1.3.6.1.4.1.4346.11.11.25.1.9 | ScalarflWorkCipCloseFormatRejects | read-only | current | Gets the number of close connection requests rejected due to bad format. |
| 1.3.6.1.4.1.4346.11.11.25.1.10 | ScalarflWorkCipCloseOtherRejects | read-only | current | Gets the number of close connection requests rejected due to other reasons. |
| 1.3.6.1.4.1.4346.11.11.25.1.11 | ScalarflWorkCipConnectionTimeouts | read-only | current | Gets the number of connection timeouts happened after device startup. |
| 1.3.6.1.4.1.4346.11.11.25.1.12 | ScalarflWorkCipNetworkStatus | read-only | current | Describes network status. |
| 1.3.6.1.4.1.4346.11.11.25.1.13 | ScalarflWorkCipModuleStatus | read-only | current | Describes Module status. |
| 1.3.6.1.4.1.4346.11.11.25.1.14 | ScalarflWorkCipClearStats | read-write | current | Clears the following CIP Connection manager statistics - flWorkCipOpenRequestsRcvd - flWorkCipOpenResourceRejects - flWorkCipOpenFormatRejects - flWorkCipOpenO… |
| 1.3.6.1.4.1.4346.11.11.25.2 | TableflWorkCipConnectionTable | not-accessible | current | List current CIP connections where each entry consists of a 'flWorkCipConnectionEntry' items. |
| 1.3.6.1.4.1.4346.11.11.25.2.1 | RowflWorkCipConnectionEntry | not-accessible | current | Each entry in this table consists of details about current CIP Connections. |
| 1.3.6.1.4.1.4346.11.11.25.2.1.1 | ColumnflWorkCipConnectionID | read-only | current | This object specifies the sessionID of the connection. |
| 1.3.6.1.4.1.4346.11.11.25.2.1.2 | ColumnflWorkCipConnectionOwnerIP | read-only | current | This object specifies the originator IP address of the connection. |
| 1.3.6.1.4.1.4346.11.11.25.2.1.3 | ColumnflWorkCipConnectionTransportClass | read-only | current | This object specifies the connection class Class 1 - I/O Connection Class 3 - Explicit Connection. |
| 1.3.6.1.4.1.4346.11.11.27 | NodeflWlan | |||
| 1.3.6.1.4.1.4346.11.11.27.1 | NodeflWlanRadio | |||
| 1.3.6.1.4.1.4346.11.11.27.1.1 | TableflWlanRadioHwTable | not-accessible | current | Wlan hardware table |
| 1.3.6.1.4.1.4346.11.11.27.1.1.1 | RowflWlanRadioHwEntry | not-accessible | current | Each entry in this table represents a wlan hardware instance |
| 1.3.6.1.4.1.4346.11.11.27.1.1.1.1 | ColumnflWlanRadioHwID | read-only | current | Each HwID is the identification number of a wlan hardware instance {1, 2, ...} |
| 1.3.6.1.4.1.4346.11.11.27.1.1.1.2 | ColumnflWlanRadioHwAntMask | read-write | current | Configure the used antenna of a specific wlan radio hardware (1) enables antenna port 1 (2) enables antenna port 2 (3) enables antenna port 1 AND port 2 |
| 1.3.6.1.4.1.4346.11.11.27.1.1.1.3 | ColumnflWlanRadioHwAggMode | read-write | current | Configure wlan aggregation for a specific wlan radio hardware instance |
| 1.3.6.1.4.1.4346.11.11.27.2 | NodeflWlanWifi | |||
| 1.3.6.1.4.1.4346.11.11.27.2.1 | TableflWlanWifiVapTable | not-accessible | current | Virtual access point table |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1 | RowflWlanWifiVapEntry | not-accessible | current | Each entry in this table represents a virtual access point instance |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.1 | ColumnflWlanWifiVapID | read-only | current | Each VapID is the identification number of a virtual accesspoint instance {101, 102, ...} |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.2 | ColumnflWlanWifiVapFastEapolRetry | read-write | current | Configure the fast eapol retry mode. Just available in access point mode. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.3 | ColumnflWlanWifiVapHideSsid | read-write | current | Configure the hide ssid mode. Default: disable (meaning the ssid is broadcasted via beacon frames) |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.4 | ColumnflWlanWifiVapExcessiveRetries | read-write | current | Configure the number of max. consecutive excessive retries before drop of connection. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.5 | ColumnflWlanWifiVapWdsBroadcast | read-write | current | Broadcast frames with unknown unicast destination to all ftb devices. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.6 | ColumnflWlanWifiVapWdsAgingTime | read-write | current | The aging time in seconds for addresses learned from behind FTB devices can be configured. Min Value: 60 seconds Max Value: 4294967 seconds Note: This option i… |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.7 | ColumnflWlanWifiVapEnableState | read-write | current | Configure the vap wlan enable / disable state. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.8 | ColumnflWlanWifiVapChScanlist | read-write | current | Configures the channel scan list. all(all channels), 1(channel-1), 2(channel-2), 3(channel-3), 4(channel-4), 5(channel-5), 6(channel-6), 7(channel-7), 8(channe… |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.9 | ColumnflWlanWifiVapMaxNumClients | read-write | current | Configures the maximal number of connectable clients. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.10 | ColumnflWlanWifiVapStartScanning | read-write | current | Starts a scan process |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.11 | ColumnflWlanWifiVapNetworkId | read-write | current | Configure the Layer 3 instance the wifi device will be added to. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.12 | ColumnflWlanWifiVapManRoaming | read-write | current | Format: {normal 00:00:00:00:00:00} {bssid xx:xx:xx:xx:xx:xx} Examples: 1) Start a common scan process based on the best accesspoint using the current configure… |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.13 | ColumnflWlanWifiVapBgScanIdle | read-write | current | Configure the roaming parameter for the wifi device. Network idle time in milliseconds (ms). |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.14 | ColumnflWlanWifiVapRssiThrshForceScan | read-write | current | Configure the roaming parameter for the wifi device. Forced scan threshold in dBm. RSSI value below which the device starts a forced scan (without respecting t… |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.15 | ColumnflWlanWifiVapRssiChangeRoam | read-write | current | Configure the roaming parameter for the wifi device. Roaming threshold in dBm. Difference in RSSI values for current AP and new AP before considering a roaming… |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.16 | ColumnflWlanWifiVapRssiChangeBgScan | read-write | current | Configure the roaming parameter for the wifi device. Background scan - RSSI change threshold in dBm Difference in RSSI value for the current AP communication b… |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.17 | ColumnflWlanWifiVapRssiThrshBgScan | read-write | current | Configure the roaming parameter for the wifi device. Background scan threshold in dBm. RSSI value below which the device starts background scans, if the networ… |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.18 | ColumnflWlanWifiVapScbManMac | read-write | current | Configure the mac address, the device uses in scb mode. Format of the value: {xx:xx:xx:xx:xx:xx} |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.19 | ColumnflWlanWifiVapScbMode | read-write | current | Configure the way the device adopts its mac address. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.20 | ColumnflWlanWifiVapFragThreshold | read-write | current | Configure the wlan fragmentation threshold of the wifi device. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.21 | ColumnflWlanWifiVapTxPowerRadiated | read-write | current | Configure the wlan transmission power in dBm of the wifi device. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.22 | ColumnflWlanWifiVapCurrentTxPowerRadiated | read-only | current | Shows the radiated transmit power in dBm. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.23 | ColumnflWlanWifiVapChBandwidth | read-write | current | Configure the wlan channel bandwidth in MHz of the wifi device. The wlan channel bandwidth can be set to 20 MHz or to 40 MHz, if higher throuput is required. T… |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.24 | ColumnflWlanWifiVapWlanCh | read-write | current | Configure the wlan channel of the wifi device. 2.4 GHz: (1-14) 5 GHz:(36) (40) (44) (48) (52) (56) (60) (64) (132) (136) (140) (149) (153) (157) (161) (165) (i… |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.25 | ColumnflWlanWifiVap80211Mode | read-write | current | Configure the wlan ieee 802.11 mode of the wifi device. {a 5 GHz | b 2.4 GHz | bg 2.4 GHz | an 5 GHz | gn 2.4 GHz} |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.26 | ColumnflWlanWifiVapHwID | read-only | current | Shows the wlan radio hardware instance the wifi is derived from. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.27 | ColumnflWlanWifiVapOpMode | read-write | current | Configure the operation mode of the wifi device. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.28 | ColumnflWlanWifiVapStatus | read-only | current | Shows if the wifi interface is scanning or ready. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.29 | ColumnflWlanWifiVapActiveProfile | read-only | current | Shows the active profile for this virtual access point. |
| 1.3.6.1.4.1.4346.11.11.27.2.1.1.30 | ColumnflWlanWifiVapRowStatus | read-create | current | createAndGo(4) - create a new row/virtual access point entity. destroy(6) - Removes a row/virtual access point entity. |
| 1.3.6.1.4.1.4346.11.11.27.2.2 | TableflWlanWifiVapProfileTable | not-accessible | current | Virtual access point profile table. Two Indices: vapID and vapProfileID. There can be many profiles defined for a single vap. |
| 1.3.6.1.4.1.4346.11.11.27.2.2.1 | RowflWlanWifiVapProfileEntry | not-accessible | current | Each entry in this table represents a vap wlan profile. |
| 1.3.6.1.4.1.4346.11.11.27.2.2.1.1 | ColumnflWlanWifiVapProfileVapID | read-only | current | First index: Each VapID is the identification number of a wlan virtual access point (101,102..). |
| 1.3.6.1.4.1.4346.11.11.27.2.2.1.2 | ColumnflWlanWifiVapProfileID | read-only | current | Second index: Each VapProfileID is the identification number of a wlan virtual access point profile (1,2..). |
| 1.3.6.1.4.1.4346.11.11.27.2.2.1.3 | ColumnflWlanWifiVapProfileEapClientcertPsKey | read-write | current | Configure the client certificate preshared key for the given profile. This write only object changes the current password to a given new password. The characte… |
| 1.3.6.1.4.1.4346.11.11.27.2.2.1.4 | ColumnflWlanWifiVapProfileEapUserPw | read-write | current | Configure the eap-user password of a specific profile for the wifi device. This write only object changes the current password to a given new password. The cha… |
| 1.3.6.1.4.1.4346.11.11.27.2.2.1.5 | ColumnflWlanWifiVapProfileEapIdentity | read-write | current | Configure the eap-identity of a specific profile for the wifi device. |
| 1.3.6.1.4.1.4346.11.11.27.2.2.1.6 | ColumnflWlanWifiVapProfileEapPhase2Auth | read-write | current | Configure the eap-phase 2 authentication mode of a specific profile for the wifi device. |
| 1.3.6.1.4.1.4346.11.11.27.2.2.1.7 | ColumnflWlanWifiVapProfileEapPairwiseMode | read-write | current | Configure the eap-pairwise mode of a specific profile for the wifi device. |
| 1.3.6.1.4.1.4346.11.11.27.2.2.1.8 | ColumnflWlanWifiVapProfileEapMode | read-write | current | Configure the eap-mode of a specific profile for the wifi device. |
| 1.3.6.1.4.1.4346.11.11.27.2.2.1.9 | ColumnflWlanWifiVapProfilePsKey | read-write | current | Configure the preshared key of a specific profile for the wifi device. This write only object changes the current password to a given new password. The charact… |
| 1.3.6.1.4.1.4346.11.11.27.2.2.1.10 | ColumnflWlanWifiVapProfileEnc | read-write | current | Configure the encryption mode of a specific profile for the wifi device. |
| 1.3.6.1.4.1.4346.11.11.27.2.2.1.11 | ColumnflWlanWifiVapProfileAuth | read-write | current | Configure the authentication mode of a specific profile for the wifi device. |
| 1.3.6.1.4.1.4346.11.11.27.2.2.1.12 | ColumnflWlanWifiVapProfileSsid | read-write | current | Configure the ssid of a specific profile for the wifi device. |
| 1.3.6.1.4.1.4346.11.11.27.2.3 | TableflWlanWifiScanResultsTable | not-accessible | current | Shows the results of a wlan scan. Note! This command requires that a scan process has been processed before. 1) Start a scan process with: flWlanWifiVapStartSc… |
| 1.3.6.1.4.1.4346.11.11.27.2.3.1 | RowflWlanWifiScanResultsEntry | not-accessible | current | Each entry in this table shows a single wlan network in the environment of the device. |
| 1.3.6.1.4.1.4346.11.11.27.2.3.1.1 | ColumnflWlanWifiScanResultsVapID | read-only | current | Each ScanResultsVapID is the identification number of a virtual access point. Every vap has its own scan results. |
| 1.3.6.1.4.1.4346.11.11.27.2.3.1.2 | ColumnflWlanWifiScanResultsID | read-only | current | Each ScanResultsID is the identification number of a wlan network in the environment of the device. |
| 1.3.6.1.4.1.4346.11.11.27.2.3.1.3 | ColumnflWlanWifiScanResultsEssid | read-only | current | The Essid (Extended Service Set Identifier) is the identifier of the found wlan network. |
| 1.3.6.1.4.1.4346.11.11.27.2.3.1.4 | ColumnflWlanWifiScanResultsBssid | read-only | current | The Bssid (Basic Service Set Identifier) is the basic identifier of the found wlan network. |
| 1.3.6.1.4.1.4346.11.11.27.2.3.1.5 | ColumnflWlanWifiScanResultsCh | read-only | current | Shows the channel on which the found wlan network is operating. |
| 1.3.6.1.4.1.4346.11.11.27.2.3.1.6 | ColumnflWlanWifiScanResultsSignal | read-only | current | Shows the signal power of the found wlan network in dBm {-0dBm..-xxdBm} (-0dBm is the best result) |
| 1.3.6.1.4.1.4346.11.11.27.2.3.1.7 | ColumnflWlanWifiScanResultsSecurity | read-only | current | Shows the security authentication methode of the found wlan network. {none | wpa-psk | wep64 | wep128 | wpa2-psk | wpa-wpa2-psk | wpa2-eap } |
| 1.3.6.1.4.1.4346.11.11.27.2.3.1.8 | ColumnflWlanWifiScanResultsEnc | read-only | current | Shows if the tkip or aes encription methode is enabled. |
| 1.3.6.1.4.1.4346.11.11.27.2.3.1.9 | ColumnflWlanWifiScanResultsMode | read-only | current | Shows the mode of the found wlan network. {Master-mode | client/managed-mode | Ad-hoc-mode | Monitor-mode} |
| 1.3.6.1.4.1.4346.11.11.27.2.4 | TableflWlanWifiConnectionTable | not-accessible | current | Shows the connected wlan network in client mode. Shows the connected clients in accesspoint mode |
| 1.3.6.1.4.1.4346.11.11.27.2.4.1 | RowflWlanWifiConnectionEntry | not-accessible | current | Each entry in this table represents a connected wlan network/wlan client. |
| 1.3.6.1.4.1.4346.11.11.27.2.4.1.1 | ColumnflWlanWifiConnectionVapID | read-only | current | Each ConnectionVapID is the identification number of a virtual access point. Every vap has a maximum of one entry in client mode and multiple entries in access… |
| 1.3.6.1.4.1.4346.11.11.27.2.4.1.2 | ColumnflWlanWifiConnectionID | read-only | current | Each ConnectionID is the identification number of a connected wlan network/wlan client (depending on client or access point mode). |
| 1.3.6.1.4.1.4346.11.11.27.2.4.1.3 | ColumnflWlanWifiConnectionOpMode | read-only | current | Shows the operation mode of the wifi device. |
| 1.3.6.1.4.1.4346.11.11.27.2.4.1.4 | ColumnflWlanWifiConnectionSsid | read-only | current | The Ssid (Extended Service Set Identifier) is the identifier of a connected wlan network. |
| 1.3.6.1.4.1.4346.11.11.27.2.4.1.5 | ColumnflWlanWifiConnectionMac | read-only | current | Shows the mac address of the connected device. |
| 1.3.6.1.4.1.4346.11.11.27.2.4.1.6 | ColumnflWlanWifiConnectionRssi | read-only | current | The Received Signal Strength Indication (RSSI) is a reference value for the signal power of a connected wlan network/wlan client. |
| 1.3.6.1.4.1.4346.11.11.27.2.4.1.7 | ColumnflWlanWifiConnectionBitRate | read-only | current | The bit rate shows the data transfer rate in Mbps of a connected wlan network/wlan client. |
| 1.3.6.1.4.1.4346.11.11.27.2.4.1.8 | ColumnflWlanWifiConnectionFreq | read-only | current | The frequency shows the operating wlan frequency band. |
| 1.3.6.1.4.1.4346.11.11.27.2.4.1.9 | ColumnflWlanWifiConnectionCh | read-only | current | Shows the operating channel of a connected wlan network/wlan client. |
| 1.3.6.1.4.1.4346.11.11.27.3 | ScalarflWlanApplySettings | read-write | current | Enable applies changes in the configuration. Note: Without enabling this command changes in the configuration are not active |
| 1.3.6.1.4.1.4346.11.11.27.4 | ScalarflWlanSettingsApplyState | read-only | current | Get last wlan apply state. After configuration the changes must be applied by flWlanApplySettings. |
| 1.3.6.1.4.1.4346.11.11.27.5 | ScalarflWlanManagementAccess | read-write | current | Configure if access to the management interface via wlan is enabled or not |
| 1.3.6.1.4.1.4346.11.11.27.6 | ScalarflWlanPtcpLldpFilter | read-write | current | Configure wlan global mode for PTCP/LLDP filter |
| 1.3.6.1.4.1.4346.11.11.27.7 | ScalarflWlanCountry | read-write | current | Configure country domain as string value (e.g. Germany) |
| 1.3.6.1.4.1.4346.11.11.27.8 | TableflWlanCountryTable | not-accessible | current | Display available country settings |
| 1.3.6.1.4.1.4346.11.11.27.8.1 | RowflWlanCountryEntry | not-accessible | current | Each entry in this table represents an available country. |
| 1.3.6.1.4.1.4346.11.11.27.8.1.1 | ColumnflWlanCountryID | read-only | current | Each country ID is the identification number of a available country. |
| 1.3.6.1.4.1.4346.11.11.27.8.1.2 | ColumnflWlanCountryName | read-only | current | Name of the available countries. |
| 1.3.6.1.4.1.4346.11.11.27.9 | ScalarflWlanOutdoorMode | read-write | current | Configure wlan global mode for outdoor operation |
| 1.3.6.1.4.1.4346.11.11.27.10 | ScalarflWlanGlobalActivation | read-write | current | Configure wlan global mode. |
| 1.3.6.1.4.1.4346.11.11.27.11 | ScalarflWlanCyclicRssiTracking | read-write | current | Cyclic generation of connection information in wlan client mode. Deactivate to reduce cpu load. Output via syslog: configure server, activate message group Dia… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EnabledDisabledStatus | INTEGER { disableStatus(0), enableStatus(1) } | current | This textual convention is used to some variables on the device that only permit two states. enableStatus : The status of the variable is enabled or true. disableStatus : The status of the variable is disabled or false |
| EtypeValue | Unsigned32 (1536..65535) | current | Ethertype value of a packet. The allowed value is 0x0600 to 0xFFFF. |
| OpModeType | INTEGER { station(0), master(1), scb(2), mcb(3), ftb(4), repeater(5), machine-admin(6) } | current | This textual convention is used to distinguish the WIFI operation mode of a device. station: 0 access point (master): 1 single client bridge (scb): 2 multi client bridge (mcb): 3 fully transparent bridge (ftb): 4 repeat… |