FOUNDRY-SN-STACKING-MIB
64 objects
Management Information for stacking system configuration and operational status. Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1991.1.1.3.31 | IdentitysnStacking | Management Information for stacking system configuration and operational status. Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. … | ||
| 1.3.6.1.4.1.1991.1.1.3.31.1 | NodesnStackingGlobalObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.31.1.1 | ScalarsnStackingGlobalConfigState | read-write | current | Configure stack state for stacking feature on the global level. none: neutral, receive packets only enable: stacking is enable, send and receive packets disabl… |
| 1.3.6.1.4.1.1991.1.1.3.31.1.2 | ScalarsnStackingGlobalMacAddress | read-write | current | Management MAC address of the stacking system. This is available to change management MAC address of stack for administrative purpose. It is strongly recommend… |
| 1.3.6.1.4.1.1991.1.1.3.31.1.3 | ScalarsnStackingGlobalPersistentMacTimerState | read-write | current | Configure persistent MAC timer state for stacking feature on the global level. enable: the persistent MAC timer is active and configured. The persistent MAC ti… |
| 1.3.6.1.4.1.1991.1.1.3.31.1.4 | ScalarsnStackingGlobalPersistentMacTimer | read-write | current | Persistent MAC timer in minutes for the stacking system Number of minutes to retain original active stack unit's base MAC address in event of active unit crash… |
| 1.3.6.1.4.1.1991.1.1.3.31.1.5 | ScalarsnStackingGlobalTopology | read-only | current | The topology of the stacking system |
| 1.3.6.1.4.1.1991.1.1.3.31.1.6 | ScalarsnStackingGlobalMode | read-only | current | The stacking mode of the system. stackingMode: the system has been installed STK EEPROM, and it is in stacking mode. nonStackingMode:the system has not been in… |
| 1.3.6.1.4.1.1991.1.1.3.31.1.7 | ScalarsnStackingGlobalMixedMode | read-only | current | The mixed stacking mode of the system. mixedStackingMode: the system is in mixed stacking mode (heterogeneous stacking). classicStackingMode: the system is not… |
| 1.3.6.1.4.1.1991.1.1.3.31.1.8 | ScalarsnStackingGlobalMaxUnitNumber | read-only | current | The max number of units in the stacking system. 1 as default value for no-stacking device |
| 1.3.6.1.4.1.1991.1.1.3.31.1.9 | ScalarsnStackingGlobalHighestPriority | read-only | current | The highest stack priority that can be configured in the stacking system. 0 as default value for no-stacking device |
| 1.3.6.1.4.1.1991.1.1.3.31.2 | NodesnStackingTableObjects | |||
| 1.3.6.1.4.1.1991.1.1.3.31.2.1 | TablesnStackingConfigUnitTable | not-accessible | current | Stacking configuration unit table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1 | RowsnStackingConfigUnitEntry | not-accessible | current | An entry in the stacking configuration table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.1 | ColumnsnStackingConfigUnitIndex | not-accessible | current | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.2 | ColumnsnStackingConfigUnitPriority | read-write | current | The priority in Active/backup eclection. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.3 | ColumnsnStackingConfigUnitConfigStackPort | read-write | current | The IfIndex for the configured stacking port. If no stacking port is configured, it will be displayed zero and the first two 10G ports as the default stacking … |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.4 | ColumnsnStackingConfigUnitRowStatus | read-write | current | This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists,… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.5 | ColumnsnStackingConfigUnitType | read-only | current | A description of the configured/active system type for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.6 | ColumnsnStackingConfigUnitState | read-only | current | A state for each unit |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.7 | ColumnsnStackingConfigUnitStackPort1 | read-only | current | First stack port for each unit. It returns 0 if stack port does not exist. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.8 | ColumnsnStackingConfigUnitStackPort2 | read-only | current | Second stack port for each unit. It returns 0 if stack port does not exist. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.9 | ColumnsnStackingConfigUnitConnectPort1 | read-write | current | First connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are sugges… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.1.1.10 | ColumnsnStackingConfigUnitConnectPort2 | read-write | current | second connect port for a peripheral unit in a mixed stacking system. A peripheral unit can have up to two connect ports that is is conected to. They are sugge… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2 | TablesnStackingOperUnitTable | not-accessible | current | Stacking operation unit table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1 | RowsnStackingOperUnitEntry | not-accessible | current | An entry in the stacking operation table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.1 | ColumnsnStackingOperUnitIndex | not-accessible | current | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.2 | ColumnsnStackingOperUnitRole | read-only | current | A role for each unit |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.3 | ColumnsnStackingOperUnitMac | read-only | current | A MAC address for each unit |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.4 | ColumnsnStackingOperUnitPriority | read-only | current | The priority in Active/backup eclection. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.5 | ColumnsnStackingOperUnitState | read-only | current | A state for each unit |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.6 | ColumnsnStackingOperUnitDescription | read-only | current | Describes the stacking state for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.7 | ColumnsnStackingOperUnitStackPort1 | read-only | current | First stack port for each unit. It returns 0 if stack port does not exist. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.8 | ColumnsnStackingOperUnitStackPort1State | read-only | current | The first stack port state for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.9 | ColumnsnStackingOperUnitStackPort2 | read-only | current | Second stack port for each unit. It returns 0 if stack port does not exist. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.10 | ColumnsnStackingOperUnitStackPort2State | read-only | current | The second stack port state for each unit. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.11 | ColumnsnStackingOperUnitNeighbor1 | read-only | current | Stacking neighbor unit (left) number. If there is no neighbor unit, then it returns 0. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.12 | ColumnsnStackingOperUnitNeighbor2 | read-only | current | Stacking neighbor unit (left) number. If there is no neighbor unit, then it returns 0. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.13 | ColumnsnStackingOperUnitImgVer | read-only | current | The version of the running software image |
| 1.3.6.1.4.1.1991.1.1.3.31.2.2.1.14 | ColumnsnStackingOperUnitBuildlVer | read-only | current | The version of the running software build |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3 | TablesnStackingConfigStackTrunkTable | not-accessible | current | Stacking configuration stack trunk table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1 | RowsnStackingConfigStackTrunkEntry | not-accessible | current | An entry in the stacking configuration Stack trunk table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.1 | ColumnsnStackingConfigStackTrunkUnit | not-accessible | current | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.2 | ColumnsnStackingConfigStackTrunkPort1 | not-accessible | current | The IfIndex for the first (primary) port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain more tha… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.3 | ColumnsnStackingConfigStackTrunkPort2 | not-accessible | current | The IfIndex for the second port of the configured stack trunk. There are two ports per stack trunk. In some case, a physical port may contain more than one log… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.4 | ColumnsnStackingConfigStackTrunkRowStatus | read-write | current | This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists,… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.5 | ColumnsnStackingConfigStackTrunkNumPort1 | read-only | current | Number of logical ports for the first (primary) port of the configured stack trunk. In some case, a physical port may contain more than one logical port, e.g. … |
| 1.3.6.1.4.1.1991.1.1.3.31.2.3.1.6 | ColumnsnStackingConfigStackTrunkNumPort2 | read-only | current | Number of logical ports for the second port of the configured stack trunk. In some case, a physical port may contain more than one logical port, e.g. one 40G (… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.4 | TablesnStackingConfigPeriPortTable | not-accessible | current | Stacking configuration peripheral port table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.4.1 | RowsnStackingConfigPeriPortEntry | not-accessible | current | An entry in the stacking configuration peripheral port table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.4.1.1 | ColumnsnStackingConfigPeriPortUnit | not-accessible | current | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.3.31.2.4.1.2 | ColumnsnStackingConfigPeriPortPort | not-accessible | current | The IfIndex for the configured mixed stacking peripheral port. It is up to eight peripheral ports per unit. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.4.1.3 | ColumnsnStackingConfigPeriPortRowStatus | read-write | current | This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists,… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.5 | TablesnStackingConfigPeriTrunkTable | not-accessible | current | Stacking configuration peripheral trunk table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.5.1 | RowsnStackingConfigPeriTrunkEntry | not-accessible | current | An entry in the stacking configuration peripheral trunk table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.1 | ColumnsnStackingConfigPeriTrunkUnit | not-accessible | current | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.2 | ColumnsnStackingConfigPeriTrunkPort1 | not-accessible | current | The IfIndex for the first port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks … |
| 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.3 | ColumnsnStackingConfigPeriTrunkPort2 | not-accessible | current | The IfIndex for the second port of the configured mixed stacking peripheral trunk. There are two ports per peripheral trunk. It is up to four peripheral trunks… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.5.1.4 | ColumnsnStackingConfigPeriTrunkRowStatus | read-write | current | This object is used to delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row If the row exists,… |
| 1.3.6.1.4.1.1991.1.1.3.31.2.6 | TablesnStackingNeighborPortTable | not-accessible | current | Stacking neighbor port table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.6.1 | RowsnStackingNeighborPortEntry | not-accessible | current | An entry in the stacking neighborport table. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.6.1.1 | ColumnsnStackingNeighborPortUnit | not-accessible | current | The stacking unit Id |
| 1.3.6.1.4.1.1991.1.1.3.31.2.6.1.2 | ColumnsnStackingNeighborPortStackPort | not-accessible | current | The IfIndex for the stack port on this unit. It is up to ten stack ports and peripheral ports per unit. |
| 1.3.6.1.4.1.1991.1.1.3.31.2.6.1.3 | ColumnsnStackingNeighborPortNeighborPort | read-only | current | The IfIndex for the neighbor port of the stack port on this unit. It returns 0 if neighbor port does not exist for this stack port. |