FSM7326-ROUTING-MIB
107 objects
No module-level DESCRIPTION found.
Imported Objects
| FSM7326-REF-MIB | fsm7326 |
| OSPF-MIB | ospfAreaEntry ospfIfEntry ospfVirtIfEntry |
| RFC1155-SMI | TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| RIPv2-MIB | rip2IfConfEntry |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.1.9.2 | Identityfsm7326Routing | |||
| 1.3.6.1.4.1.4526.1.9.2.1 | NodeagentSwitchArpGroup | |||
| 1.3.6.1.4.1.4526.1.9.2.1.1 | ScalaragentSwitchArpAgeoutTime | read-write | current | Configures the ARP entry ageout time in seconds. Allowable range: 15-21600 |
| 1.3.6.1.4.1.4526.1.9.2.1.2 | ScalaragentSwitchArpResponseTime | read-write | current | Configures the ARP request response timeout in seconds. Allowable range: 1-10 |
| 1.3.6.1.4.1.4526.1.9.2.1.3 | ScalaragentSwitchArpMaxRetries | read-write | current | Configures the ARP count of maximum request for retries. Allowable range: 0-10 |
| 1.3.6.1.4.1.4526.1.9.2.1.4 | ScalaragentSwitchArpCacheSize | read-write | current | Configures the ARP maximum number of entries in the cache. Allowable range is platform-specific. |
| 1.3.6.1.4.1.4526.1.9.2.1.5 | ScalaragentSwitchArpDynamicRenew | read-write | current | This indicates the current setting of ARP dynamic renew mode. |
| 1.3.6.1.4.1.4526.1.9.2.1.6 | ScalaragentSwitchArpTotalEntryCountCurrent | read-only | current | Current number of entries in the ARP cache. |
| 1.3.6.1.4.1.4526.1.9.2.1.7 | ScalaragentSwitchArpTotalEntryCountPeak | read-only | current | Peak number of entries recorded in the ARP cache over time. This value is restarted whenever the ARP cache size is changed. |
| 1.3.6.1.4.1.4526.1.9.2.1.8 | ScalaragentSwitchArpStaticEntryCountCurrent | read-only | current | Current number of configured static ARP entries. |
| 1.3.6.1.4.1.4526.1.9.2.1.9 | ScalaragentSwitchArpStaticEntryCountMax | read-only | current | Maximum number of configurable static ARP entries. |
| 1.3.6.1.4.1.4526.1.9.2.1.10 | TableagentSwitchArpTable | not-accessible | current | This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information. |
| 1.3.6.1.4.1.4526.1.9.2.1.10.1 | RowagentSwitchArpEntry | not-accessible | current | |
| 1.3.6.1.4.1.4526.1.9.2.1.10.1.1 | ColumnagentSwitchArpAge | read-only | current | This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries a… |
| 1.3.6.1.4.1.4526.1.9.2.1.10.1.2 | ColumnagentSwitchArpIpAddress | read-only | current | The IP Address assigned to each interface. |
| 1.3.6.1.4.1.4526.1.9.2.1.10.1.3 | ColumnagentSwitchArpMacAddress | read-create | current | The hardware MAX Address that each interface maps to. |
| 1.3.6.1.4.1.4526.1.9.2.1.10.1.4 | ColumnagentSwitchArpInterface | read-only | current | The Associated IfIndex which identified the ARP Entry. |
| 1.3.6.1.4.1.4526.1.9.2.1.10.1.5 | ColumnagentSwitchArpType | read-only | current | The type of ARP entry. |
| 1.3.6.1.4.1.4526.1.9.2.1.10.1.6 | ColumnagentSwitchArpStatus | read-write | current | The status of this ARP entry. Setting this object destroy will remove the entry. |
| 1.3.6.1.4.1.4526.1.9.2.2 | NodeagentSwitchIpGroup | |||
| 1.3.6.1.4.1.4526.1.9.2.2.1 | ScalaragentSwitchIpRoutingMode | read-write | current | Administratively enables/disables routing on the switch. |
| 1.3.6.1.4.1.4526.1.9.2.2.3 | TableagentSwitchIpInterfaceTable | not-accessible | current | |
| 1.3.6.1.4.1.4526.1.9.2.2.3.1 | RowagentSwitchIpInterfaceEntry | not-accessible | current | |
| 1.3.6.1.4.1.4526.1.9.2.2.3.1.1 | ColumnagentSwitchIpInterfaceIfIndex | read-only | current | The IfIndex associated with this instance. |
| 1.3.6.1.4.1.4526.1.9.2.2.3.1.2 | ColumnagentSwitchIpInterfaceIpAddress | read-write | current | The IpAddress assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceNetMask must be set at the same time. |
| 1.3.6.1.4.1.4526.1.9.2.2.3.1.3 | ColumnagentSwitchIpInterfaceNetMask | read-write | current | The NetMask assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceIpAddress must be set at the same time. |
| 1.3.6.1.4.1.4526.1.9.2.2.3.1.4 | ColumnagentSwitchIpInterfaceClearIp | read-write | current | Sets the interfaces IpAddress and NetMask back to 0.0.0.0 |
| 1.3.6.1.4.1.4526.1.9.2.2.3.1.5 | ColumnagentSwitchIpInterfaceRoutingMode | read-write | current | Enables or disables routing for this interface. |
| 1.3.6.1.4.1.4526.1.9.2.2.4 | TableagentSwitchIpRouterDiscoveryTable | not-accessible | current | There is no global administrative flag for router discovery. The global routing flag (agentSwitchIpRoutingMode) will be used for this purpose. If routing is di… |
| 1.3.6.1.4.1.4526.1.9.2.2.4.1 | RowagentSwitchIpRouterDiscoveryEntry | not-accessible | current | |
| 1.3.6.1.4.1.4526.1.9.2.2.4.1.1 | ColumnagentSwitchIpRouterDiscoveryIfIndex | read-only | current | Interface Number to configure Router Discovery on. |
| 1.3.6.1.4.1.4526.1.9.2.2.4.1.2 | ColumnagentSwitchIpRouterDiscoveryAdvertiseMode | read-write | current | Enable or disable router discovery on the interface. |
| 1.3.6.1.4.1.4526.1.9.2.2.4.1.3 | ColumnagentSwitchIpRouterDiscoveryMaxAdvertisementInterval | read-write | current | Maximum time allowed between sending router advertisements from the interface. |
| 1.3.6.1.4.1.4526.1.9.2.2.4.1.4 | ColumnagentSwitchIpRouterDiscoveryMinAdvertisementInterval | read-write | current | Minimum time allowed between sending router advertisements from the interface. This value must be less than or equal to agentSwitchIpRouterDiscoveryMaxAdvertis… |
| 1.3.6.1.4.1.4526.1.9.2.2.4.1.5 | ColumnagentSwitchIpRouterDiscoveryAdvertisementLifetime | read-write | current | Value of lifetime field of router advertsisement sent from the interface. This value must be greater than or equal to agentSwitchIpRouterDiscoveryMaxAdvertisem… |
| 1.3.6.1.4.1.4526.1.9.2.2.4.1.6 | ColumnagentSwitchIpRouterDiscoveryPreferenceLevel | read-write | current | Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher t… |
| 1.3.6.1.4.1.4526.1.9.2.2.4.1.7 | ColumnagentSwitchIpRouterDiscoveryAdvertisementAddress | read-write | current | Address used when sending router advertisements from the interface. |
| 1.3.6.1.4.1.4526.1.9.2.2.5 | TableagentSwitchIpVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.4526.1.9.2.2.5.1 | RowagentSwitchIpVlanEntry | not-accessible | current | A Static VLAN for which routing can be enabled/disabled |
| 1.3.6.1.4.1.4526.1.9.2.2.5.1.1 | ColumnagentSwitchIpVlanId | read-only | current | The Vlan's Id. |
| 1.3.6.1.4.1.4526.1.9.2.2.5.1.2 | ColumnagentSwitchIpVlanIfIndex | read-only | current | The IfIndex associated with this VLAN. |
| 1.3.6.1.4.1.4526.1.9.2.2.5.1.3 | ColumnagentSwitchIpVlanRoutingStatus | read-create | current | Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing |
| 1.3.6.1.4.1.4526.1.9.2.3 | NodeagentRouterRipConfigGroup | |||
| 1.3.6.1.4.1.4526.1.9.2.3.1 | ScalaragentRouterRipAdminState | read-write | current | Sets the administrative mode of RIP in the router. |
| 1.3.6.1.4.1.4526.1.9.2.3.2 | ScalaragentRouterRipSplitHorizonMode | read-write | current | Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split… |
| 1.3.6.1.4.1.4526.1.9.2.3.3 | ScalaragentRouterRipAutoSummaryMode | read-write | current | Sets the RIP auto summarization mode in the router. A value of enable(1) means that routes advertized by this RIP router are combined, or summarized, whenever … |
| 1.3.6.1.4.1.4526.1.9.2.3.4 | ScalaragentRouterRipHostRoutesAcceptMode | read-write | current | Sets the RIP host route acceptance mode in the router. A value of enable(1) means that host routes advertized to this RIP router will be accepted (learned) int… |
| 1.3.6.1.4.1.4526.1.9.2.3.5 | ScalaragentRouterRipDefaultMetric | read-write | current | Default metric of redistributed routes, when RIP redistributes from other protocols. |
| 1.3.6.1.4.1.4526.1.9.2.3.6 | ScalaragentRouterRipDefaultMetricConfigured | read-write | current | Flag to determine whether RIP default-metric is configured or not. |
| 1.3.6.1.4.1.4526.1.9.2.3.7 | ScalaragentRouterRipDefaultInfoOriginate | read-write | current | Flag to determine, whether RIP can advertise a default-route learned from another protocol. |
| 1.3.6.1.4.1.4526.1.9.2.3.8 | TableagentRipRouteRedistTable | not-accessible | current | This table contains the MIB objects required to configure route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be a… |
| 1.3.6.1.4.1.4526.1.9.2.3.8.1 | RowagentRipRouteRedistEntry | not-accessible | current | |
| 1.3.6.1.4.1.4526.1.9.2.3.8.1.1 | ColumnagentRipRouteRedistSource | read-only | current | Source route, from which RIP can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry. |
| 1.3.6.1.4.1.4526.1.9.2.3.8.1.2 | ColumnagentRipRouteRedistMode | read-write | current | User enabels/disables route-redistribution for a particular source protocol. |
| 1.3.6.1.4.1.4526.1.9.2.3.8.1.3 | ColumnagentRipRouteRedistMetric | read-write | current | Metric used for redistributing a particular source protocol route into RIP. |
| 1.3.6.1.4.1.4526.1.9.2.3.8.1.4 | ColumnagentRipRouteRedistMetricConfigured | read-write | current | Flag to determine whether RIP redistribute-metric is configured or not. |
| 1.3.6.1.4.1.4526.1.9.2.3.8.1.5 | ColumnagentRipRouteRedistMatchInternal | read-write | current | If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.4526.1.9.2.3.8.1.6 | ColumnagentRipRouteRedistMatchExternal1 | read-write | current | If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.4526.1.9.2.3.8.1.7 | ColumnagentRipRouteRedistMatchExternal2 | read-write | current | If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.4526.1.9.2.3.8.1.8 | ColumnagentRipRouteRedistMatchNSSAExternal1 | read-write | current | If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.4526.1.9.2.3.8.1.9 | ColumnagentRipRouteRedistMatchNSSAExternal2 | read-write | current | If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.4526.1.9.2.3.8.1.10 | ColumnagentRipRouteRedistDistList | read-write | current | Access-list number of the access-list, which filters routes received from a source-protocol. |
| 1.3.6.1.4.1.4526.1.9.2.3.8.1.11 | ColumnagentRipRouteRedistDistListConfigured | read-write | current | Flag to determine whether Access-list is configured or not. |
| 1.3.6.1.4.1.4526.1.9.2.3.9 | TableagentRip2IfConfTable | not-accessible | current | A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable in the RIPv2-MIB. |
| 1.3.6.1.4.1.4526.1.9.2.3.9.1 | RowagentRip2IfConfEntry | not-accessible | current | A Single Routing Domain in a single Subnet. Augments rip2IfConfEntry in RIPv2-MIB. |
| 1.3.6.1.4.1.4526.1.9.2.3.9.1.1 | ColumnagentRip2IfConfAuthKeyId | read-create | current | The identifier for the authentication key used on this interface. This field is only meaningful when the RIPv2-MIB rip2IfConfAuthType is md5(3); otherwise, the… |
| 1.3.6.1.4.1.4526.1.9.2.4 | NodeagentRouterOspfConfigGroup | |||
| 1.3.6.1.4.1.4526.1.9.2.4.1 | ScalaragentOspfDefaultMetric | read-write | current | Default metric of redistributed routes, when OSPF redistributes from other protocols. |
| 1.3.6.1.4.1.4526.1.9.2.4.2 | ScalaragentOspfDefaultMetricConfigured | read-write | current | Flag to determine whether OSPF default-metric is configured or not. |
| 1.3.6.1.4.1.4526.1.9.2.4.3 | ScalaragentOspfDefaultInfoOriginate | read-write | current | Flag to determine, whether OSPF can advertise a default-route learned from another protocol. |
| 1.3.6.1.4.1.4526.1.9.2.4.4 | ScalaragentOspfDefaultInfoOriginateAlways | read-write | current | When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding … |
| 1.3.6.1.4.1.4526.1.9.2.4.5 | ScalaragentOspfDefaultInfoOriginateMetric | read-write | current | Metric of the default route,which OSPF advertises when learned from other protocol. |
| 1.3.6.1.4.1.4526.1.9.2.4.6 | ScalaragentOspfDefaultInfoOriginateMetricConfigured | read-write | current | Flag to determine whether OSPF default-info originate metric is configured or not. |
| 1.3.6.1.4.1.4526.1.9.2.4.7 | ScalaragentOspfDefaultInfoOriginateMetricType | read-write | current | Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2). |
| 1.3.6.1.4.1.4526.1.9.2.4.8 | TableagentOspfRouteRedistTable | not-accessible | current | This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be… |
| 1.3.6.1.4.1.4526.1.9.2.4.8.1 | RowagentOspfRouteRedistEntry | not-accessible | current | |
| 1.3.6.1.4.1.4526.1.9.2.4.8.1.1 | ColumnagentOspfRouteRedistSource | read-only | current | Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry. |
| 1.3.6.1.4.1.4526.1.9.2.4.8.1.2 | ColumnagentOspfRouteRedistMode | read-write | current | User enabels/disables route-redistribution for a particular source protocol. |
| 1.3.6.1.4.1.4526.1.9.2.4.8.1.3 | ColumnagentOspfRouteRedistMetric | read-write | current | Metric used for redistributing a particular source protocol route into OSPF. |
| 1.3.6.1.4.1.4526.1.9.2.4.8.1.4 | ColumnagentOspfRouteRedistMetricConfigured | read-write | current | Flag to determine whether OSPF redistribute-metric is configured or not. |
| 1.3.6.1.4.1.4526.1.9.2.4.8.1.5 | ColumnagentOspfRouteRedistMetricType | read-write | current | Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2). |
| 1.3.6.1.4.1.4526.1.9.2.4.8.1.6 | ColumnagentOspfRouteRedistTag | read-write | current | It specifies the tag field in routes redistributed by OSPF. |
| 1.3.6.1.4.1.4526.1.9.2.4.8.1.7 | ColumnagentOspfRouteRedistSubnets | read-write | current | If this value is false, then OSPF will not redistribute subnetted routes. |
| 1.3.6.1.4.1.4526.1.9.2.4.8.1.8 | ColumnagentOspfRouteRedistDistList | read-write | current | Access-list number of the access-list, which filters routes received from a source-protocol. |
| 1.3.6.1.4.1.4526.1.9.2.4.8.1.9 | ColumnagentOspfRouteRedistDistListConfigured | read-write | current | Flag to determine whether Access-list is configured or not. |
| 1.3.6.1.4.1.4526.1.9.2.4.9 | TableagentOspfIfTable | not-accessible | current | The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB. |
| 1.3.6.1.4.1.4526.1.9.2.4.9.1 | RowagentOspfIfEntry | not-accessible | current | The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB. |
| 1.3.6.1.4.1.4526.1.9.2.4.9.1.1 | ColumnagentOspfIfAuthKeyId | read-create | current | The identifier for the authentication key used on this interface. This field is only meaningful when the OSPF-MIB ospfIfAuthType is md5(2); otherwise, the valu… |
| 1.3.6.1.4.1.4526.1.9.2.4.10 | TableagentOspfVirtIfTable | not-accessible | current | Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB. |
| 1.3.6.1.4.1.4526.1.9.2.4.10.1 | RowagentOspfVirtIfEntry | not-accessible | current | Information about a single Virtual Interface. Augments ospfVirtIfEntry in OSPF-MIB. |
| 1.3.6.1.4.1.4526.1.9.2.4.10.1.1 | ColumnagentOspfVirtIfAuthKeyId | read-create | current | The identifier for the authentication key used on this virtual interface. This field is only meaningful when the OSPF-MIB ospfVirtIfAuthType is md5(2); otherwi… |
| 1.3.6.1.4.1.4526.1.9.2.4.11 | ScalaragentRouterOspfRFC1583CompatibilityMode | read-write | current | From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'e… |
| 1.3.6.1.4.1.4526.1.9.2.4.12 | TableagentOspfAreaTable | not-accessible | current | Information describing the additional configured parameters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.4526.1.9.2.4.12.1 | RowagentOspfAreaEntry | not-accessible | current | Information describing the additional configured parameters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.4526.1.9.2.4.12.1.2 | ColumnagentOspfAuthType | read-write | current | The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis. |
| 1.3.6.1.4.1.4526.1.9.2.5 | NodeagentSnmpTrapFlagsConfigGroupLayer3 | |||
| 1.3.6.1.4.1.4526.1.9.2.5.1 | ScalaragentSnmpVRRPNewMasterTrapFlag | read-write | current | This flag enables the sending of VRRP new master notification traps. |
| 1.3.6.1.4.1.4526.1.9.2.5.2 | ScalaragentSnmpVRRPAuthFailureTrapFlag | read-write | current | This flag enables the sending of VRRP authentication failure notification traps. |
| 1.3.6.1.4.1.4526.1.9.2.6 | NodeagentBootpDhcpRelayGroup | |||
| 1.3.6.1.4.1.4526.1.9.2.6.1 | ScalaragentBootpDhcpRelayMaxHopCount | read-write | current | The BOOTP/DHCP Max Hop Count. The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16 assuming that the request is looped … |
| 1.3.6.1.4.1.4526.1.9.2.6.2 | ScalaragentBootpDhcpRelayForwardingIp | read-write | current | The BOOTP/DHCP Server IP Address. All the requests will be forwarded and the replies expected from this address. |
| 1.3.6.1.4.1.4526.1.9.2.6.3 | ScalaragentBootpDhcpRelayForwardMode | read-write | current | The BOOTP/DHCP Admin Mode. The relaying functionality can be administratively enabled or disabled by this object |
| 1.3.6.1.4.1.4526.1.9.2.6.4 | ScalaragentBootpDhcpRelayMinWaitTime | read-write | current | The BOOTP/DHCP Minimum Wait Time. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs' (seconds since client began boo… |
| 1.3.6.1.4.1.4526.1.9.2.6.5 | ScalaragentBootpDhcpRelayCircuitIdOptionMode | read-write | current | The BOOTP/DHCP Circuit ID Option Mode. This flag is set to enable/disable the network element to add/remove the DHCP Relay agent Circuit ID sub-options. |
| 1.3.6.1.4.1.4526.1.9.2.6.6 | ScalaragentBootpDhcpRelayNumOfRequestsReceived | read-only | current | The Number of BOOTP/DHCP Requests Received. Total number of BOOTREQUESTs received from all clients. |
| 1.3.6.1.4.1.4526.1.9.2.6.7 | ScalaragentBootpDhcpRelayNumOfRequestsForwarded | read-only | current | The Number of BOOTP/DHCP Requests Forwarded. Total number of BOOTREQUESTs forwarded to the next agents/servers. |
| 1.3.6.1.4.1.4526.1.9.2.6.8 | ScalaragentBootpDhcpRelayNumOfDiscards | read-only | current | The Number of BOOTP/DHCP Discards. Total number of packets discarded by the network element because of error in the packet. |