HM2-PLATFORM-ROUTING-MIB
450 objects
The Hirschmann Platform2 MIB for Layer3 Switching. Copyright (C) 2011. All Rights Reserved.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.12.2 | Identityhm2PlatformRouting | The Hirschmann Platform2 MIB for Layer3 Switching. Copyright (C) 2011. All Rights Reserved. | ||
| 1.3.6.1.4.1.248.12.2.1 | Nodehm2AgentSwitchArpGroup | |||
| 1.3.6.1.4.1.248.12.2.1.1 | Scalarhm2AgentSwitchArpAgeoutTime | read-write | current | HiOS: Configures the exact ARP entry age-out time in seconds. HiSecOS: Configures the average ARP entry age-out time in seconds, with each entry aging out afte… |
| 1.3.6.1.4.1.248.12.2.1.2 | Scalarhm2AgentSwitchArpResponseTime | read-write | current | Configures the ARP request response timeout in seconds. Allowable range: 1-10 |
| 1.3.6.1.4.1.248.12.2.1.3 | Scalarhm2AgentSwitchArpMaxRetries | read-write | current | Configures the ARP count of maximum request for retries. Allowable range: 0-10 |
| 1.3.6.1.4.1.248.12.2.1.4 | Scalarhm2AgentSwitchArpCacheSize | read-write | current | Configures the ARP maximum number of entries in the cache. Allowable range is platform specific. |
| 1.3.6.1.4.1.248.12.2.1.5 | Scalarhm2AgentSwitchArpDynamicRenew | read-write | current | This indicates the current setting of ARP dynamic renew mode. |
| 1.3.6.1.4.1.248.12.2.1.6 | Scalarhm2AgentSwitchArpTotalEntryCountCurrent | read-only | current | Current number of entries in the ARP cache. |
| 1.3.6.1.4.1.248.12.2.1.7 | Scalarhm2AgentSwitchArpTotalEntryCountPeak | read-only | current | Peak number of entries recorded in the ARP cache over time. This value is restarted whenever the ARP cache size is changed. |
| 1.3.6.1.4.1.248.12.2.1.8 | Scalarhm2AgentSwitchArpStaticEntryCountCurrent | read-only | current | Current number of configured static ARP entries. |
| 1.3.6.1.4.1.248.12.2.1.9 | Scalarhm2AgentSwitchArpStaticEntryCountMax | read-only | current | Maximum number of configurable static ARP entries. |
| 1.3.6.1.4.1.248.12.2.1.11 | Tablehm2AgentSwitchLocalProxyArpTable | not-accessible | current | This table contains the per-interface configuration parameters for local proxy ARP. |
| 1.3.6.1.4.1.248.12.2.1.11.1 | Rowhm2AgentSwitchLocalProxyArpEntry | not-accessible | current | Represents a logical row in the hm2AgentSwitchLocalProxyArpTable. |
| 1.3.6.1.4.1.248.12.2.1.11.1.1 | Columnhm2AgentSwitchLocalProxyArpMode | read-write | current | The local proxy ARP mode for the interface. |
| 1.3.6.1.4.1.248.12.2.1.12 | Tablehm2AgentSwitchIntfArpTable | not-accessible | current | This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information. |
| 1.3.6.1.4.1.248.12.2.1.12.1 | Rowhm2AgentSwitchIntfArpEntry | not-accessible | current | This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information. |
| 1.3.6.1.4.1.248.12.2.1.12.1.1 | Columnhm2AgentSwitchIntfArpIpAddress | not-accessible | current | The Type of Address assigned to this interface. |
| 1.3.6.1.4.1.248.12.2.1.12.1.2 | Columnhm2AgentSwitchIntfArpIfIndex | not-accessible | current | The Associated IfIndex which identified the ARP Entry. This value must be specified for static ARP entries on an unnumbered interface |
| 1.3.6.1.4.1.248.12.2.1.12.1.3 | Columnhm2AgentSwitchIntfArpAge | read-only | current | This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries a… |
| 1.3.6.1.4.1.248.12.2.1.12.1.4 | Columnhm2AgentSwitchIntfArpMacAddress | read-create | current | The hardware MAX Address that each interface maps to. |
| 1.3.6.1.4.1.248.12.2.1.12.1.5 | Columnhm2AgentSwitchIntfArpType | read-only | current | The type of ARP entry. |
| 1.3.6.1.4.1.248.12.2.1.12.1.6 | Columnhm2AgentSwitchIntfArpStatus | read-create | current | The status of this ARP entry. Setting this object destroy will remove the entry. |
| 1.3.6.1.4.1.248.12.2.1.100 | Scalarhm2AgentSwitchArpSparseLearn | read-write | current | This indicates the current setting of ARP sparse learn mode. |
| 1.3.6.1.4.1.248.12.2.1.101 | Scalarhm2AgentSwitchArpCacheClear | read-write | current | Setting the object to 'flushARP' will flush the ARP cache. Setting the object to 'flushARPWithGateway' will also flush the ARP cache but includes the ARP entri… |
| 1.3.6.1.4.1.248.12.2.1.248 | Scalarhm2AgentSwitchProxyArpMaxResponseDelay | read-write | current | Configures the maximum time in ms to wait before a proxy response is sent. Setting this to 0 determines a response to be sent immediately. |
| 1.3.6.1.4.1.248.12.2.2 | Nodehm2AgentSwitchIpGroup | |||
| 1.3.6.1.4.1.248.12.2.2.1 | Scalarhm2AgentSwitchIpRoutingMode | read-write | current | Administratively enables/disables routing on the switch. |
| 1.3.6.1.4.1.248.12.2.2.2 | Scalarhm2AgentSwitchIpDefaultGateway | read-write | current | Specifies the default gateway manually configured. |
| 1.3.6.1.4.1.248.12.2.2.3 | Tablehm2AgentSwitchIpInterfaceTable | not-accessible | current | IP interface table. |
| 1.3.6.1.4.1.248.12.2.2.3.1 | Rowhm2AgentSwitchIpInterfaceEntry | not-accessible | current | IP interface entry. |
| 1.3.6.1.4.1.248.12.2.2.3.1.1 | Columnhm2AgentSwitchIpInterfaceIfIndex | read-only | current | The IfIndex associated with this instance. |
| 1.3.6.1.4.1.248.12.2.2.3.1.2 | Columnhm2AgentSwitchIPAddressConfigMethod | read-write | current | The source of the IP address. User can set the object to none(0) or dhcp(2). Option dhcp(2) enables DHCP client on the interface. Option none(0) disables DHCP … |
| 1.3.6.1.4.1.248.12.2.2.3.1.3 | Columnhm2AgentSwitchIpInterfaceIpAddress | read-write | current | The IP address assigned to this interface. When setting this value, the value of hm2AgentSwitchIpInterfaceNetMask must be set at the same time. |
| 1.3.6.1.4.1.248.12.2.2.3.1.4 | Columnhm2AgentSwitchIpInterfaceNetMask | read-write | current | The netmask assigned to this interface. When setting this value, the value of hm2AgentSwitchIpInterfaceIpAddress must be set at the same time. |
| 1.3.6.1.4.1.248.12.2.2.3.1.5 | Columnhm2AgentSwitchIpInterfaceClearIp | read-write | current | When setting this object to 'enable(1)' the interfaces IP address and netmask will be set back to 0.0.0.0. Reading this object always returns 'disable(2). |
| 1.3.6.1.4.1.248.12.2.2.3.1.6 | Columnhm2AgentSwitchIpInterfaceRoutingMode | read-write | current | Enables or disables routing for this interface. |
| 1.3.6.1.4.1.248.12.2.2.3.1.7 | Columnhm2AgentSwitchIpInterfaceProxyARPMode | read-write | current | Enables or disables proxy ARP for this interface. |
| 1.3.6.1.4.1.248.12.2.2.3.1.8 | Columnhm2AgentSwitchIpInterfaceMtuValue | read-write | current | Configures the MTU value for this interface. The applicable range is 68 to the <interface MTU value - 18>, in bytes. Get of this object returns the effective M… |
| 1.3.6.1.4.1.248.12.2.2.3.1.9 | Columnhm2AgentSwitchIpInterfaceBandwidth | read-write | current | Configures the bandwidth value for this interface. If the returned value is 0, bandwidth for this interface is not configured. |
| 1.3.6.1.4.1.248.12.2.2.3.1.10 | Columnhm2AgentSwitchIpInterfaceUnnumberedIfIndex | read-only | current | If this object is non-zero, it indicates that the interface is unnumbered and specifies which interface the address is borrowed from. |
| 1.3.6.1.4.1.248.12.2.2.3.1.11 | Columnhm2AgentSwitchIpInterfaceIcmpUnreachables | read-write | current | If this object is enabled, it indicates that ICMP unreachables can be sent on this interface. |
| 1.3.6.1.4.1.248.12.2.2.3.1.12 | Columnhm2AgentSwitchIpInterfaceIcmpRedirects | read-write | current | If this object is enabled and hm2AgentSwitchIpIcmpRedirectsMode is also enabled, ICMP redirects can be sent on this interface. |
| 1.3.6.1.4.1.248.12.2.2.3.1.13 | Columnhm2AgentSwitchDhcpOperation | read-write | current | Renew or release the IP address learned through DHCP. Get on this object always gives none. None means no operation is performed on DHCP. |
| 1.3.6.1.4.1.248.12.2.2.3.1.14 | Columnhm2AgentSwitchIpInterfaceSuppressed | read-only | current | This mib variable contains the following values, which has the meaning as: 'unsuppressed' - The interface is not suppressed 'suppressed' - The interface is sup… |
| 1.3.6.1.4.1.248.12.2.2.3.1.15 | Columnhm2AgentSwitchIpInterfaceNumberOfFlaps | read-only | current | This mib variable displays the number of flaps occurred on the interface |
| 1.3.6.1.4.1.248.12.2.2.3.1.16 | Columnhm2AgentSwitchIpInterfaceCurrentPenalty | read-only | current | This mib variable displays the current penalty of an interface |
| 1.3.6.1.4.1.248.12.2.2.3.1.17 | Columnhm2AgentSwitchIpInterfaceReUseTime | read-only | current | This mib variable displays the number of seconds until the interface is allowed to come up |
| 1.3.6.1.4.1.248.12.2.2.3.1.248 | Columnhm2AgentSwitchIpInterfaceNetdirectedBCMode | read-write | current | Enables or disables netdirected broadcasts for this interface. |
| 1.3.6.1.4.1.248.12.2.2.4 | Tablehm2AgentSwitchIpRouterDiscoveryTable | not-accessible | current | There is no global administrative flag for router discovery. The global routing flag (hm2AgentSwitchIpRoutingMode) will be used for this purpose. If routing is… |
| 1.3.6.1.4.1.248.12.2.2.4.1 | Rowhm2AgentSwitchIpRouterDiscoveryEntry | not-accessible | current | . |
| 1.3.6.1.4.1.248.12.2.2.4.1.1 | Columnhm2AgentSwitchIpRouterDiscoveryIfIndex | read-only | current | Interface Number to configure Router Discovery on. |
| 1.3.6.1.4.1.248.12.2.2.4.1.2 | Columnhm2AgentSwitchIpRouterDiscoveryAdvertiseMode | read-write | current | Enable or disable router discovery on the interface. |
| 1.3.6.1.4.1.248.12.2.2.4.1.3 | Columnhm2AgentSwitchIpRouterDiscoveryMaxAdvertisementInterval | read-write | current | Maximum time allowed between sending router advertisements from the interface. |
| 1.3.6.1.4.1.248.12.2.2.4.1.4 | Columnhm2AgentSwitchIpRouterDiscoveryMinAdvertisementInterval | read-write | current | Minimum time allowed between sending router advertisements from the interface. This value must be less than or equal to hm2AgentSwitchIpRouterDiscoveryMaxAdver… |
| 1.3.6.1.4.1.248.12.2.2.4.1.5 | Columnhm2AgentSwitchIpRouterDiscoveryAdvertisementLifetime | read-write | current | Value of lifetime field of router advertsisement sent from the interface. This value must be greater than or equal to hm2AgentSwitchIpRouterDiscoveryMaxAdverti… |
| 1.3.6.1.4.1.248.12.2.2.4.1.6 | Columnhm2AgentSwitchIpRouterDiscoveryPreferenceLevel | read-write | current | Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher t… |
| 1.3.6.1.4.1.248.12.2.2.4.1.7 | Columnhm2AgentSwitchIpRouterDiscoveryAdvertisementAddress | read-write | current | Address used when sending router advertisements from the interface. |
| 1.3.6.1.4.1.248.12.2.2.5 | Tablehm2AgentSwitchIpVlanTable | not-accessible | current | A static VLAN for which routing can be enabled/disabled. |
| 1.3.6.1.4.1.248.12.2.2.5.1 | Rowhm2AgentSwitchIpVlanEntry | not-accessible | current | A static VLAN for which routing can be enabled/disabled. |
| 1.3.6.1.4.1.248.12.2.2.5.1.1 | Columnhm2AgentSwitchIpVlanId | read-only | current | The VLAN's ID. |
| 1.3.6.1.4.1.248.12.2.2.5.1.2 | Columnhm2AgentSwitchIpVlanIfIndex | read-write | current | The IfIndex associated with this VLAN. |
| 1.3.6.1.4.1.248.12.2.2.5.1.3 | Columnhm2AgentSwitchIpVlanRoutingStatus | read-create | current | Status of Routing mode per VLAN. active(1) - VLAN is enabled for routing createAndGo(4) - Adds VLAN entry for routing createAndWait(5) - Adds VLAN entry for ro… |
| 1.3.6.1.4.1.248.12.2.2.6 | Tablehm2AgentSwitchSecondaryAddressTable | not-accessible | current | Contains a list of secondary IP addresses associated with an interface. |
| 1.3.6.1.4.1.248.12.2.2.6.1 | Rowhm2AgentSwitchSecondaryAddressEntry | not-accessible | current | A secondary IP address for a given interface. This IP address must not conflict with the IP address configured in the hm2AgentSwitchIpInterfaceTable. |
| 1.3.6.1.4.1.248.12.2.2.6.1.1 | Columnhm2AgentSwitchSecondaryIpAddress | not-accessible | current | The secondary IP address assigned to this interface. |
| 1.3.6.1.4.1.248.12.2.2.6.1.2 | Columnhm2AgentSwitchSecondaryNetMask | read-create | current | The secondary netmask assigned to this interface. This value must be set during creation and can not be changed. |
| 1.3.6.1.4.1.248.12.2.2.6.1.3 | Columnhm2AgentSwitchSecondaryStatus | read-create | current | Creates a new entry in the secondary address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given i… |
| 1.3.6.1.4.1.248.12.2.2.8 | Nodehm2AgentSwitchIpIcmpControlGroup | |||
| 1.3.6.1.4.1.248.12.2.2.8.1 | Scalarhm2AgentSwitchIpIcmpEchoReplyMode | read-write | current | Sets the administrative Echo Reply Mode. |
| 1.3.6.1.4.1.248.12.2.2.8.2 | Scalarhm2AgentSwitchIpIcmpRedirectsMode | read-write | current | Sets the administrative Mode for sending Redirects. |
| 1.3.6.1.4.1.248.12.2.2.8.3 | Scalarhm2AgentSwitchIpIcmpRateLimitInterval | read-write | current | HiOS: Specifies the burst-interval parameter to calculate the average rate (determined as interval/burst-size) which is the minimum time between subsequent ICM… |
| 1.3.6.1.4.1.248.12.2.2.8.4 | Scalarhm2AgentSwitchIpIcmpRateLimitBurstSize | read-write | current | HiOS: Specifies the burst-size parameter to calculate the average rate (interval/burst-size). A granularity of less than 10ms is not guaranteed. HiSecOS: The s… |
| 1.3.6.1.4.1.248.12.2.2.10 | Tablehm2AgentSwitchIntfIpHelperAddressTable | not-accessible | current | Contains a list of IP helper addresses associated with an interface. |
| 1.3.6.1.4.1.248.12.2.2.10.1 | Rowhm2AgentSwitchIntfIpHelperAddressEntry | not-accessible | current | An IP helper address for a given interface. |
| 1.3.6.1.4.1.248.12.2.2.10.1.1 | Columnhm2AgentSwitchIntfIpHelperUdpPort | not-accessible | current | UDP port number. Received packets with this destination UDP port number are forwarded to the helper address in this entry. A relay entry with port 0 allows dhc… |
| 1.3.6.1.4.1.248.12.2.2.10.1.2 | Columnhm2AgentSwitchIntfIpHelperIpAddress | not-accessible | current | An IP helper address for packets received on this interface. An address of 0.0.0.0 identifies the entry as a discard entry. Packets that match a discard entry … |
| 1.3.6.1.4.1.248.12.2.2.10.1.4 | Columnhm2AgentSwitchIntfIpHelperHitCount | read-only | current | The number of times a packet has been forwarded or discarded according to this entry. |
| 1.3.6.1.4.1.248.12.2.2.10.1.5 | Columnhm2AgentSwitchIntfIpHelperStatus | read-create | current | Creates a new entry in the Helper Address table. Allowed values are: createAndGo(4) - Creates an IP helper entry in this table. destroy(6) - Removes the IP hel… |
| 1.3.6.1.4.1.248.12.2.2.11 | Scalarhm2AgentSwitchClearIpDefaultGateway | read-write | current | Resets the Global Default Gateway address. |
| 1.3.6.1.4.1.248.12.2.2.248 | Scalarhm2AgentSwitchIpFirstActiveAddressType | read-only | current | The type of hm2AgentSwitchIpFirstActiveAddress. |
| 1.3.6.1.4.1.248.12.2.2.249 | Scalarhm2AgentSwitchIpFirstActiveAddress | read-only | current | The lowest ip address of any active routing interface. |
| 1.3.6.1.4.1.248.12.2.2.250 | Scalarhm2AgentSwitchIpStaticDefaultPref | read-write | current | The default preference for static routes. |
| 1.3.6.1.4.1.248.12.2.2.251 | Scalarhm2AgentSwitchIpRouteCount | read-only | current | Number of routes configured on the switch. |
| 1.3.6.1.4.1.248.12.2.2.252 | Scalarhm2AgentSwitchIpBestRouteCount | read-only | current | Number of best routes active on the switch. |
| 1.3.6.1.4.1.248.12.2.2.253 | Scalarhm2AgentSwitchIpSourceRoutingMode | read-write | current | Administratively enables/disables source routing on the switch. |
| 1.3.6.1.4.1.248.12.2.3 | Nodehm2AgentRouterRipConfigGroup | |||
| 1.3.6.1.4.1.248.12.2.3.1 | Scalarhm2AgentRouterRipAdminState | read-write | current | Sets the administrative mode of RIP in the router. |
| 1.3.6.1.4.1.248.12.2.3.2 | Scalarhm2AgentRouterRipSplitHorizonMode | read-write | current | Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split… |
| 1.3.6.1.4.1.248.12.2.3.3 | Scalarhm2AgentRouterRipAutoSummaryMode | read-write | current | Sets the RIP auto summarization mode in the router. A value of enable(1) means that routes advertized by this RIP router are combined, or summarized, whenever … |
| 1.3.6.1.4.1.248.12.2.3.4 | Scalarhm2AgentRouterRipHostRoutesAcceptMode | read-write | current | Sets the RIP host route acceptance mode in the router. A value of enable(1) means that host routes advertized to this RIP router will be accepted (learned) int… |
| 1.3.6.1.4.1.248.12.2.3.5 | Scalarhm2AgentRouterRipDefaultMetric | read-write | current | Default metric of redistributed routes, when RIP redistributes from other protocols. {0} indicates that the parameter is not configured, this value should not … |
| 1.3.6.1.4.1.248.12.2.3.6 | Scalarhm2AgentRouterRipDefaultMetricConfigured | read-write | current | Flag to determine whether RIP default-metric is configured or not. Set to 'false' to unconfigure the default route metric. Set to 'true' is not allowed. |
| 1.3.6.1.4.1.248.12.2.3.7 | Scalarhm2AgentRouterRipDefaultInfoOriginate | read-write | current | Flag to determine, whether RIP can advertise a default-route learned from another protocol. |
| 1.3.6.1.4.1.248.12.2.3.8 | Tablehm2AgentRipRouteRedistTable | not-accessible | current | This table contains the MIB objects required to configure route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be a… |
| 1.3.6.1.4.1.248.12.2.3.8.1 | Rowhm2AgentRipRouteRedistEntry | not-accessible | current | The entries of the table. |
| 1.3.6.1.4.1.248.12.2.3.8.1.1 | Columnhm2AgentRipRouteRedistSource | read-only | current | Source route, from which RIP can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry. |
| 1.3.6.1.4.1.248.12.2.3.8.1.2 | Columnhm2AgentRipRouteRedistMode | read-write | current | User enabels/disables route-redistribution for a particular source protocol. |
| 1.3.6.1.4.1.248.12.2.3.8.1.3 | Columnhm2AgentRipRouteRedistMetric | read-write | current | Metric used for redistributing a particular source protocol route into RIP. {0} indicates that the parameter is not configured, this value should not be set. V… |
| 1.3.6.1.4.1.248.12.2.3.8.1.4 | Columnhm2AgentRipRouteRedistMetricConfigured | read-write | current | Flag to determine whether RIP redistribute-metric is configured or not. Set to 'false' to unconfigure redistribute metric. Set to 'true' is not allowed. |
| 1.3.6.1.4.1.248.12.2.3.8.1.5 | Columnhm2AgentRipRouteRedistMatchInternal | read-write | current | If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.248.12.2.3.8.1.6 | Columnhm2AgentRipRouteRedistMatchExternal1 | read-write | current | If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.248.12.2.3.8.1.7 | Columnhm2AgentRipRouteRedistMatchExternal2 | read-write | current | If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.248.12.2.3.8.1.8 | Columnhm2AgentRipRouteRedistMatchNSSAExternal1 | read-write | current | If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.248.12.2.3.8.1.9 | Columnhm2AgentRipRouteRedistMatchNSSAExternal2 | read-write | current | If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.248.12.2.3.8.1.10 | Columnhm2AgentRipRouteRedistDistList | read-write | current | Access-list number of the access-list, which filters routes received from a source-protocol. |
| 1.3.6.1.4.1.248.12.2.3.8.1.11 | Columnhm2AgentRipRouteRedistDistListConfigured | read-write | current | Flag to determine whether Access-list is configured or not. |
| 1.3.6.1.4.1.248.12.2.3.9 | Tablehm2AgentRip2IfConfTable | not-accessible | current | A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable in the RIPv2-MIB. |
| 1.3.6.1.4.1.248.12.2.3.9.1 | Rowhm2AgentRip2IfConfEntry | not-accessible | current | A Single Routing Domain in a single Subnet. Augments rip2IfConfEntry in RIPv2-MIB. |
| 1.3.6.1.4.1.248.12.2.3.9.1.1 | Columnhm2AgentRip2IfConfAuthKeyId | read-create | current | The identifier for the authentication key used on this interface. This field is only meaningful when the RIPv2-MIB rip2IfConfAuthType is md5(3); otherwise, the… |
| 1.3.6.1.4.1.248.12.2.3.10 | Scalarhm2AgentRouterRipRoutePref | read-write | current | The route preference, sometimes called administrative distance, for RIP routes. A route with a preference of 255 is considered unreachable. |
| 1.3.6.1.4.1.248.12.2.3.248 | Scalarhm2AgentRouterRipUpdateTimerInterval | read-write | current | Sets the RIP update timer interval in the router. This is the time in seconds between two full routing table update packets. |
| 1.3.6.1.4.1.248.12.2.4 | Nodehm2AgentRouterOspfConfigGroup | |||
| 1.3.6.1.4.1.248.12.2.4.1 | Scalarhm2AgentOspfDefaultMetric | read-write | current | Default metric of redistributed routes, when OSPF redistributes from other protocols. {0} indicates that the parameter is not configured, this value should not… |
| 1.3.6.1.4.1.248.12.2.4.2 | Scalarhm2AgentOspfDefaultMetricConfigured | read-write | current | Flag to determine whether OSPF default-metric is configured or not. Set to 'false' to unconfigure the OSPF default-metric. Set to 'true' is not allowed. |
| 1.3.6.1.4.1.248.12.2.4.3 | Scalarhm2AgentOspfDefaultInfoOriginate | read-write | current | Flag to determine, whether OSPF can advertise a default-route learned from another protocol. |
| 1.3.6.1.4.1.248.12.2.4.4 | Scalarhm2AgentOspfDefaultInfoOriginateAlways | read-write | current | When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding … |
| 1.3.6.1.4.1.248.12.2.4.5 | Scalarhm2AgentOspfDefaultInfoOriginateMetric | read-write | current | Metric of the default route, which OSPF advertises when learned from other protocol. (0) indicates that the parameter is not configured, this value should not … |
| 1.3.6.1.4.1.248.12.2.4.6 | Scalarhm2AgentOspfDefaultInfoOriginateMetricConfigured | read-write | current | Flag to determine whether OSPF default-info originate metric is configured or not. Setting to false unconfigures the default route metric. Setting to true is n… |
| 1.3.6.1.4.1.248.12.2.4.7 | Scalarhm2AgentOspfDefaultInfoOriginateMetricType | read-write | current | Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2). |
| 1.3.6.1.4.1.248.12.2.4.8 | Tablehm2AgentOspfRouteRedistTable | not-accessible | current | This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be… |
| 1.3.6.1.4.1.248.12.2.4.8.1 | Rowhm2AgentOspfRouteRedistEntry | not-accessible | current | The entries of the table. |
| 1.3.6.1.4.1.248.12.2.4.8.1.1 | Columnhm2AgentOspfRouteRedistSource | read-only | current | Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry. |
| 1.3.6.1.4.1.248.12.2.4.8.1.2 | Columnhm2AgentOspfRouteRedistMode | read-write | current | User enables/disables route-redistribution for a particular source protocol. |
| 1.3.6.1.4.1.248.12.2.4.8.1.3 | Columnhm2AgentOspfRouteRedistMetric | read-write | current | Metric used for redistributing a particular source protocol route into OSPF. |
| 1.3.6.1.4.1.248.12.2.4.8.1.4 | Columnhm2AgentOspfRouteRedistMetricConfigured | read-write | current | Flag to determine whether OSPF redistribute-metric is configured or not. |
| 1.3.6.1.4.1.248.12.2.4.8.1.5 | Columnhm2AgentOspfRouteRedistMetricType | read-write | current | Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2). |
| 1.3.6.1.4.1.248.12.2.4.8.1.6 | Columnhm2AgentOspfRouteRedistTag | read-write | current | It specifies the tag field in routes redistributed by OSPF. |
| 1.3.6.1.4.1.248.12.2.4.8.1.7 | Columnhm2AgentOspfRouteRedistSubnets | read-write | current | If this value is false, then OSPF will not redistribute subnetted routes. |
| 1.3.6.1.4.1.248.12.2.4.8.1.8 | Columnhm2AgentOspfRouteRedistDistList | read-write | current | Access-list number of the access-list, which filters routes received from a source-protocol. HiOS: Valid access list numbers are between 1000 and 1099. HiSecOS… |
| 1.3.6.1.4.1.248.12.2.4.8.1.9 | Columnhm2AgentOspfRouteRedistDistListConfigured | read-write | current | Flag to determine whether Access-list is configured or not. |
| 1.3.6.1.4.1.248.12.2.4.9 | Tablehm2AgentOspfIfTable | not-accessible | current | The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB. |
| 1.3.6.1.4.1.248.12.2.4.9.1 | Rowhm2AgentOspfIfEntry | not-accessible | current | The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB. |
| 1.3.6.1.4.1.248.12.2.4.9.1.1 | Columnhm2AgentOspfIfAuthKeyId | read-create | current | The identifier for the authentication key used on this interface. This field is only meaningful when the OSPF-MIB ospfIfAuthType is md5(2); otherwise, the valu… |
| 1.3.6.1.4.1.248.12.2.4.9.1.2 | Columnhm2AgentOspfIfIpMtuIgnoreFlag | read-write | current | Configures the IP MTU Ignore Flag value for this OSPF interface. |
| 1.3.6.1.4.1.248.12.2.4.9.1.3 | Columnhm2AgentOspfIfPassiveMode | read-write | current | Flag to determine whether the interface is passive. A passive interface will not participate in the OSPF adjacency formation. |
| 1.3.6.1.4.1.248.12.2.4.9.1.4 | Columnhm2AgentOspfIfAdvertiseSecondaries | read-write | current | Configures the advertisability of the secondary addresses configured on this interface. |
| 1.3.6.1.4.1.248.12.2.4.9.1.248 | Columnhm2AgentOspfIfFastHelloMode | read-write | current | Configures the fast hello mode on this interface. If enabled, hello packets are sent every 250ms, ospfIfHelloInterval is ignored. The dead interval and spf del… |
| 1.3.6.1.4.1.248.12.2.4.10 | Tablehm2AgentOspfVirtIfTable | not-accessible | current | Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB. |
| 1.3.6.1.4.1.248.12.2.4.10.1 | Rowhm2AgentOspfVirtIfEntry | not-accessible | current | Information about a single Virtual Interface. Augments ospfVirtIfEntry in OSPF-MIB. |
| 1.3.6.1.4.1.248.12.2.4.10.1.1 | Columnhm2AgentOspfVirtIfAuthKeyId | read-create | current | The identifier for the authentication key used on this virtual interface. This field is only meaningful when the OSPF-MIB ospfVirtIfAuthType is md5(2); otherwi… |
| 1.3.6.1.4.1.248.12.2.4.11 | Scalarhm2AgentRouterOspfRFC1583CompatibilityMode | read-write | current | From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'e… |
| 1.3.6.1.4.1.248.12.2.4.12 | Scalarhm2AgentOspfSpfDelayTime | read-write | current | Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. It can be an integer from 0 to 65535. The default t… |
| 1.3.6.1.4.1.248.12.2.4.13 | Scalarhm2AgentOspfSpfHoldTime | read-write | current | Minimum time (in seconds) between two consecutive SPF calculations. It can be an integer from 0 to 65535. The default time is 10 seconds. A value of 0 means th… |
| 1.3.6.1.4.1.248.12.2.4.14 | Scalarhm2AgentOspfAutoCostRefBw | read-write | current | Auto cost reference bandwidth of the router interfaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is… |
| 1.3.6.1.4.1.248.12.2.4.15 | Scalarhm2AgentOspfOpaqueLsaSupport | read-write | current | The router's support for Opaque LSA types. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. |
| 1.3.6.1.4.1.248.12.2.4.16 | Tablehm2AgentOspfAreaOpaqueLsdbTable | not-accessible | current | The OSPF Process's Area Link State Database (LSDB). The LSDB contains type-10 Link State Advertisements from throughout the areas that the device is attached t… |
| 1.3.6.1.4.1.248.12.2.4.16.1 | Rowhm2AgentOspfAreaOpaqueLsdbEntry | not-accessible | current | A single AreaOpaque Link State Advertisement. |
| 1.3.6.1.4.1.248.12.2.4.16.1.1 | Columnhm2AgentOspfAreaOpaqueLsdbAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.248.12.2.4.16.1.2 | Columnhm2AgentOspfAreaOpaqueLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.4.1.248.12.2.4.16.1.3 | Columnhm2AgentOspfAreaOpaqueLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.248.12.2.4.16.1.4 | Columnhm2AgentOspfAreaOpaqueLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.248.12.2.4.16.1.5 | Columnhm2AgentOspfAreaOpaqueLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.4.1.248.12.2.4.16.1.6 | Columnhm2AgentOspfAreaOpaqueLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.248.12.2.4.16.1.7 | Columnhm2AgentOspfAreaOpaqueLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.248.12.2.4.16.1.8 | Columnhm2AgentOspfAreaOpaqueLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size |
| 1.3.6.1.4.1.248.12.2.4.17 | Tablehm2AgentOspfLocalLsdbTable | not-accessible | current | The OSPF Process's Link-Local Link State Database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only Link-Local… |
| 1.3.6.1.4.1.248.12.2.4.17.1 | Rowhm2AgentOspfLocalLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.248.12.2.4.17.1.1 | Columnhm2AgentOspfLocalLsdbIpAddress | read-only | current | The IP Address of the interface from which the LSA was received if the interface is numbered. |
| 1.3.6.1.4.1.248.12.2.4.17.1.2 | Columnhm2AgentOspfLocalLsdbAddressLessIf | read-only | current | The Interface Index of the interface from which the LSA was received if the interface is unnumbered. |
| 1.3.6.1.4.1.248.12.2.4.17.1.3 | Columnhm2AgentOspfLocalLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.248.12.2.4.17.1.4 | Columnhm2AgentOspfLocalLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being… |
| 1.3.6.1.4.1.248.12.2.4.17.1.5 | Columnhm2AgentOspfLocalLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.248.12.2.4.17.1.6 | Columnhm2AgentOspfLocalLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.4.1.248.12.2.4.17.1.7 | Columnhm2AgentOspfLocalLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.248.12.2.4.17.1.8 | Columnhm2AgentOspfLocalLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.248.12.2.4.17.1.9 | Columnhm2AgentOspfLocalLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size. |
| 1.3.6.1.4.1.248.12.2.4.18 | Tablehm2AgentOspfAsLsdbTable | not-accessible | current | The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is … |
| 1.3.6.1.4.1.248.12.2.4.18.1 | Rowhm2AgentOspfAsLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.248.12.2.4.18.1.1 | Columnhm2AgentOspfAsLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.248.12.2.4.18.1.2 | Columnhm2AgentOspfAsLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.248.12.2.4.18.1.3 | Columnhm2AgentOspfAsLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.248.12.2.4.18.1.4 | Columnhm2AgentOspfAsLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.4.1.248.12.2.4.18.1.5 | Columnhm2AgentOspfAsLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.248.12.2.4.18.1.6 | Columnhm2AgentOspfAsLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.248.12.2.4.18.1.7 | Columnhm2AgentOspfAsLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.248.12.2.4.19 | Scalarhm2AgentOspfDefaultPassiveMode | read-write | current | Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation. |
| 1.3.6.1.4.1.248.12.2.4.20 | Scalarhm2AgentOspfRoutePrefIntraArea | read-write | current | The route preference, sometimes called administrative distance, for intra-area OSPFv2 routes. A route with a preference of 255 is considered unreachable. |
| 1.3.6.1.4.1.248.12.2.4.21 | Scalarhm2AgentOspfRoutePrefInterArea | read-write | current | The route preference, sometimes called administrative distance, for inter-area OSPFv2 routes. A route with a preference of 255 is considered unreachable. |
| 1.3.6.1.4.1.248.12.2.4.22 | Scalarhm2AgentOspfRoutePrefExternal | read-write | current | The route preference, sometimes called administrative distance, for external OSPFv2 routes. A route with a preference of 255 is considered unreachable. |
| 1.3.6.1.4.1.248.12.2.4.248 | Tablehm2AgentOspfAreaNSSATable | not-accessible | current | Information about all the configured Not-So-Stubby-Area(NSSAs) in OSPF. Augments ospfAreaTable from the OSPF-MIB. |
| 1.3.6.1.4.1.248.12.2.4.248.1 | Rowhm2AgentOspfAreaNSSAEntry | not-accessible | current | Information about a single Not-So-Stubby-Area(NSSA). Augments ospfAreaEntry in OSPF-MIB. |
| 1.3.6.1.4.1.248.12.2.4.248.1.1 | Columnhm2AgentOspfAreaNSSAImportSummaries | read-write | current | When set to enabled, OSPF's summary routes are imported into the NSSA as Type-3 summary-LSAs. When set to disabled, summary routes are not imported into the NS… |
| 1.3.6.1.4.1.248.12.2.4.248.1.2 | Columnhm2AgentOspfAreaNSSARedistribute | read-write | current | When set to enabled NSSA ASBRs will not redistribute external routes into the NSSA and they will cease to originate Type-7 external LSAs for external routes. |
| 1.3.6.1.4.1.248.12.2.4.248.1.3 | Columnhm2AgentOspfAreaNSSADefaultInfoOriginate | read-write | current | Determines if the router will originate a Type-7 default LSA into the NSSA. This command will cause a default LSA to be originated only if the router is an NSS… |
| 1.3.6.1.4.1.248.12.2.4.248.1.4 | Columnhm2AgentOspfAreaNSSADefaultMetric | read-write | current | Defines the metric value advertised in the Type-7 default LSA originated by this router |
| 1.3.6.1.4.1.248.12.2.4.248.1.5 | Columnhm2AgentOspfAreaNSSADefaultMetricType | read-write | current | Defines the metric type advertised in the Type-7 default LSA originated by this router |
| 1.3.6.1.4.1.248.12.2.4.249 | Tablehm2AgentOspfIfMetricTable | not-accessible | current | Information about interface metrics. |
| 1.3.6.1.4.1.248.12.2.4.249.1 | Rowhm2AgentOspfIfMetricEntry | not-accessible | current | Information about interface metrics. |
| 1.3.6.1.4.1.248.12.2.4.249.1.1 | Columnhm2AgentOspfIfMetricCalculatedCost | read-only | current | Returns the actual cost value used by OSPF for this interface. |
| 1.3.6.1.4.1.248.12.2.5 | Nodehm2AgentSnmpTrapFlagsConfigGroupLayer3 | |||
| 1.3.6.1.4.1.248.12.2.5.1 | Scalarhm2AgentSnmpVRRPNewMasterTrapFlag | read-write | current | This flag enables the sending of VRRP new master notification traps. |
| 1.3.6.1.4.1.248.12.2.5.2 | Scalarhm2AgentSnmpVRRPAuthFailureTrapFlag | read-write | current | This flag enables the sending of VRRP authentication failure notification traps. |
| 1.3.6.1.4.1.248.12.2.6 | Nodehm2AgentBootpDhcpRelayGroup | |||
| 1.3.6.1.4.1.248.12.2.6.1 | Scalarhm2AgentBootpDhcpRelayMaxHopCount | read-write | current | The BOOTP/DHCP Max Hop Count. The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16 assuming that the request is looped … |
| 1.3.6.1.4.1.248.12.2.6.4 | Scalarhm2AgentBootpDhcpRelayMinWaitTime | read-write | current | The BOOTP/DHCP Minimum Wait Time. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs' (seconds since client began boo… |
| 1.3.6.1.4.1.248.12.2.6.5 | Scalarhm2AgentBootpDhcpRelayCircuitIdOptionMode | read-write | current | The BOOTP/DHCP Circuit ID Option Mode. This flag is set to enable/disable the network element to add/remove the DHCP Relay agent Circuit ID sub-options. |
| 1.3.6.1.4.1.248.12.2.7 | Nodehm2AgentECMPGroup | |||
| 1.3.6.1.4.1.248.12.2.7.1 | Scalarhm2AgentECMPOspfMaxPaths | read-write | current | It sets the number of paths that OSPF can report for a given destination where maxpaths is platform-dependent. |
| 1.3.6.1.4.1.248.12.2.8 | Nodehm2AgentRouterVrrpConfigGroup | |||
| 1.3.6.1.4.1.248.12.2.8.1 | Scalarhm2AgentRouterVrrpAdminState | read-write | current | Sets the administrative mode of VRRP in the router. |
| 1.3.6.1.4.1.248.12.2.9 | Nodehm2AgentVrrpOperations | |||
| 1.3.6.1.4.1.248.12.2.9.1 | Tablehm2AgentRouterVrrpOperTable | not-accessible | obsolete | Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of `hm2AgentRouterVrrpOperEntry' items. |
| 1.3.6.1.4.1.248.12.2.9.1.1 | Rowhm2AgentRouterVrrpOperEntry | not-accessible | obsolete | An entry in the table contains operational priority that is associated with a virtual router. |
| 1.3.6.1.4.1.248.12.2.9.1.1.1 | Columnhm2AgentRouterVrrpOperPriority | read-only | obsolete | This object specifies the operational priority of the VRRP router. This value will be afftected by both the tracking process and the configured priority set by… |
| 1.3.6.1.4.1.248.12.2.9.248 | Scalarhm2AgentRouterVrrpNumberOfFastInst | read-only | current | Number of VRRP instances with advertisement interval less than one second. |
| 1.3.6.1.4.1.248.12.2.11 | Nodehm2AgentIpHelperGroup | |||
| 1.3.6.1.4.1.248.12.2.11.1 | Scalarhm2AgentIpHelperAdminMode | read-write | current | Administratively enable or disable IP helper. |
| 1.3.6.1.4.1.248.12.2.11.2 | Scalarhm2AgentDhcpClientMsgsReceived | read-only | current | The Number of DHCP Requests Received. Total number of DHCP requests received from all clients. |
| 1.3.6.1.4.1.248.12.2.11.3 | Scalarhm2AgentDhcpClientMsgsRelayed | read-only | current | The Number of DHCP Requests Forwarded. Total number of DHCP requests relayed to a server. |
| 1.3.6.1.4.1.248.12.2.11.4 | Scalarhm2AgentDhcpServerMsgsReceived | read-only | current | The number of DHCP messages received from a server. |
| 1.3.6.1.4.1.248.12.2.11.5 | Scalarhm2AgentDhcpServerMsgsRelayed | read-only | current | The number of DHCP messages relayed to a server. |
| 1.3.6.1.4.1.248.12.2.11.6 | Scalarhm2AgentUdpClientMsgsReceived | read-only | current | The number of UDP messages received from all clients. |
| 1.3.6.1.4.1.248.12.2.11.7 | Scalarhm2AgentUdpClientMsgsRelayed | read-only | current | The number of UDP messages relayed to a server. |
| 1.3.6.1.4.1.248.12.2.11.8 | Tablehm2AgentSwitchIpHelperAddressTable | not-accessible | current | Contains a list of IP helper addresses configured globally. |
| 1.3.6.1.4.1.248.12.2.11.8.1 | Rowhm2AgentSwitchIpHelperAddressEntry | not-accessible | current | An IP Helper address that applies to packets received on any interface. |
| 1.3.6.1.4.1.248.12.2.11.8.1.1 | Columnhm2AgentSwitchIpHelperUdpPort | read-write | current | UDP port number. A relay entry with port 0 allows dhcp, time, winnameserver, tacacs, dns, tftp, netbios-ns and netbios-dgm relay. |
| 1.3.6.1.4.1.248.12.2.11.8.1.2 | Columnhm2AgentSwitchIpHelperAddress | read-write | current | The IP Helper address assigned to this interface. |
| 1.3.6.1.4.1.248.12.2.11.8.1.3 | Columnhm2AgentSwitchIpHelperHitCount | read-only | current | The number of times a packet has been forwarded or discarded according to this entry. |
| 1.3.6.1.4.1.248.12.2.11.8.1.4 | Columnhm2AgentSwitchIpHelperStatus | read-create | current | Creates a new entry in the global IP Helper address table. Allowed values are: createAndGo(4) - Creates an IP helper entry in this table. destroy(6) - Removes … |
| 1.3.6.1.4.1.248.12.2.11.9 | Scalarhm2AgentUdpClientMsgsTtlExpired | read-only | current | The number of UDP messages received with an expired TTL. |
| 1.3.6.1.4.1.248.12.2.11.10 | Scalarhm2AgentUdpClientMsgsDiscarded | read-only | current | The number of UDP messages that matched a discard entry. |
| 1.3.6.1.4.1.248.12.2.12 | Nodehm2AgentInternalVlanGroup | |||
| 1.3.6.1.4.1.248.12.2.12.1 | Scalarhm2AgentInternalVlanBase | read-write | current | The VLAN ID internally assigned to the first port-based routing interface. |
| 1.3.6.1.4.1.248.12.2.12.2 | Scalarhm2AgentInternalVlanPolicy | read-write | current | Whether to search up or down from the base VLAN ID for a free VLAN ID to assign to a port-based routing interface. |
| 1.3.6.1.4.1.248.12.2.12.3 | Tablehm2AgentSwitchInternalVlanTable | not-accessible | current | Contains a list of VLAN IDs used internally for port-based routing interfaces. |
| 1.3.6.1.4.1.248.12.2.12.3.1 | Rowhm2AgentSwitchInternalVlanEntry | not-accessible | current | A VLAN ID internally assigned to a port-based routing interface. |
| 1.3.6.1.4.1.248.12.2.12.3.1.1 | Columnhm2AgentSwitchInternalVlanId | not-accessible | current | A VLAN ID internally assigned to a port-based routing interface. |
| 1.3.6.1.4.1.248.12.2.12.3.1.2 | Columnhm2AgentSwitchInternalVlanIfIndex | read-only | current | Interface index of port-based routing interface using this VLAN ID. |
| 1.3.6.1.4.1.248.12.2.13 | Nodehm2AgentOspfQueueGroup | |||
| 1.3.6.1.4.1.248.12.2.13.1 | Tablehm2AgentOspfQueueTable | not-accessible | current | Table lists information about OSPFv2 message queue utilization. |
| 1.3.6.1.4.1.248.12.2.13.1.1 | Rowhm2AgentOspfQueueEntry | not-accessible | current | Information on a specific OSPFv2 message queue. |
| 1.3.6.1.4.1.248.12.2.13.1.1.1 | Columnhm2AgentOspfQueueIndex | not-accessible | current | Index value for this message queue. |
| 1.3.6.1.4.1.248.12.2.13.1.1.2 | Columnhm2AgentOspfQueueName | read-only | current | Name of an OSPFv2 message queue. |
| 1.3.6.1.4.1.248.12.2.13.1.1.3 | Columnhm2AgentOspfQueueLength | read-only | current | The number of messages currently in the message queue. |
| 1.3.6.1.4.1.248.12.2.13.1.1.4 | Columnhm2AgentOspfQueueHigh | read-only | current | The high water mark of the number of messages in the message queue. |
| 1.3.6.1.4.1.248.12.2.13.1.1.5 | Columnhm2AgentOspfQueueDrops | read-only | current | The number of items dropped because the message queue was full. |
| 1.3.6.1.4.1.248.12.2.13.1.1.6 | Columnhm2AgentOspfQueueLimit | read-only | current | The maximum number of messages this queue can hold. |
| 1.3.6.1.4.1.248.12.2.14 | Nodehm2AgentOspfPacketStatsGroup | |||
| 1.3.6.1.4.1.248.12.2.14.1 | Scalarhm2AgentOspfCountersCleared | read-only | current | The time since OSPFv2 counters were last cleared, in seconds. |
| 1.3.6.1.4.1.248.12.2.14.2 | Scalarhm2AgentOspfLsaRetxCount | read-only | current | The total number of LSAs retransmitted since OSPF counters were last cleared. If the same LSA is retransmitted to multiple neighbors, the count is incremented … |
| 1.3.6.1.4.1.248.12.2.14.3 | Scalarhm2AgentOspfHellosRx | read-only | current | The total number of OSPFv2 Hello packets received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.4 | Scalarhm2AgentOspfHellosTx | read-only | current | The total number of OSPFv2 Hello packets transmitted since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.5 | Scalarhm2AgentOspfDdRx | read-only | current | The total number of OSPFv2 Database Description packets received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.6 | Scalarhm2AgentOspfDdTx | read-only | current | The total number of OSPFv2 Database Description packets transmitted since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.7 | Scalarhm2AgentOspfLsReqRx | read-only | current | The total number of OSPFv2 LS Request packets received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.8 | Scalarhm2AgentOspfLsReqTx | read-only | current | The total number of OSPFv2 LS Request packets transmitted since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.9 | Scalarhm2AgentOspfLsUpdatesRx | read-only | current | The total number of OSPFv2 LS Update packets received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.10 | Scalarhm2AgentOspfLsUpdatesTx | read-only | current | The total number of OSPFv2 LS Update packets transmitted since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.11 | Scalarhm2AgentOspfLsAckRx | read-only | current | The total number of OSPFv2 LS Acknowledgement packets received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.12 | Scalarhm2AgentOspfLsAckTx | read-only | current | The total number of OSPFv2 LS Acknowledgement packets transmitted since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.13 | Scalarhm2AgentOspfLsUpdatesRxMax | read-only | current | The maximum rate of OSPFv2 LS Update packets received over any 5-second interval since OSPF counters were last cleared. The rate is given in packets per second… |
| 1.3.6.1.4.1.248.12.2.14.14 | Scalarhm2AgentOspfLsUpdatesTxMax | read-only | current | The maximum rate of OSPFv2 LS Update packets transmitted over any 5-second interval since OSPF counters were last cleared. The rate is given in packets per sec… |
| 1.3.6.1.4.1.248.12.2.14.15 | Scalarhm2AgentOspfType1LsasRx | read-only | current | The number of type 1 (router) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.16 | Scalarhm2AgentOspfType2LsasRx | read-only | current | The number of type 2 (network) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.17 | Scalarhm2AgentOspfType3LsasRx | read-only | current | The number of type 3 (network summary) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.18 | Scalarhm2AgentOspfType4LsasRx | read-only | current | The number of type 4 (ASBR summary) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.19 | Scalarhm2AgentOspfType5LsasRx | read-only | current | The number of type 5 (external) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.20 | Scalarhm2AgentOspfType7LsasRx | read-only | current | The number of type 7 (NSSA external) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.21 | Scalarhm2AgentOspfType9LsasRx | read-only | current | The number of type 9 (Link Opaque) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.22 | Scalarhm2AgentOspfType10LsasRx | read-only | current | The number of type 10 (Area Opaque) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.14.23 | Scalarhm2AgentOspfType11LsasRx | read-only | current | The number of type 11 (AS Opaque) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.15 | Tablehm2AgentOspfSpfStatsTable | not-accessible | current | Contains statistics for the twenty most recent SPF runs. Statistics are reported from the oldest SPF first to the most recent. |
| 1.3.6.1.4.1.248.12.2.15.1 | Rowhm2AgentOspfSpfStatsEntry | not-accessible | current | Statistics for a single SPF run. |
| 1.3.6.1.4.1.248.12.2.15.1.1 | Columnhm2AgentOspfSpfIndex | not-accessible | current | Integer that uniquely identifies an SPF run. This value is incremented each time OSPF runs a full routing table calculation. |
| 1.3.6.1.4.1.248.12.2.15.1.2 | Columnhm2AgentOspfSpfStatsDeltaT | read-only | current | How long since this routing table calculation ran. The time is given in seconds. |
| 1.3.6.1.4.1.248.12.2.15.1.3 | Columnhm2AgentOspfSpfStatsIntra | read-only | current | Number of milliseconds to compute intra-area routes. |
| 1.3.6.1.4.1.248.12.2.15.1.4 | Columnhm2AgentOspfSpfStatsSumm | read-only | current | Number of milliseconds to compute inter-area routes. |
| 1.3.6.1.4.1.248.12.2.15.1.5 | Columnhm2AgentOspfSpfStatsExt | read-only | current | Number of milliseconds to compute external routes. |
| 1.3.6.1.4.1.248.12.2.15.1.6 | Columnhm2AgentOspfSpfStatsSpfTotal | read-only | current | Number of milliseconds for entire routing table calculation. |
| 1.3.6.1.4.1.248.12.2.15.1.7 | Columnhm2AgentOspfSpfStatsRibUpdate | read-only | current | Number of milliseconds to update the common routing table. |
| 1.3.6.1.4.1.248.12.2.15.1.8 | Columnhm2AgentOspfSpfStatsReason | read-only | current | Reasons why a routing table calculation was required. R - new router LSA, N - new Network LSA, SN - new network summary LSA, SA - new ASBR summary LSA, X - new… |
| 1.3.6.1.4.1.248.12.2.16 | Nodehm2AgentRoutingHeapGroup | |||
| 1.3.6.1.4.1.248.12.2.16.1 | Scalarhm2AgentRoutingHeapSize | read-only | current | The size of the routing heap, in bytes. Unicast routing protocols and ARP allocate memory from the routing heap. |
| 1.3.6.1.4.1.248.12.2.16.2 | Scalarhm2AgentRoutingHeapInUse | read-only | current | The number of bytes currently allocated from the routing heap. |
| 1.3.6.1.4.1.248.12.2.16.3 | Scalarhm2AgentRoutingHeapHigh | read-only | current | High water mark for the number of bytes allocated from the routing heap. |
| 1.3.6.1.4.1.248.12.2.17 | Nodehm2AgentRoutingTableSummaryGroup | |||
| 1.3.6.1.4.1.248.12.2.17.1 | Scalarhm2AgentConnectedRoutes | read-only | current | The number of connected routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.2 | Scalarhm2AgentStaticRoutes | read-only | current | The number of static routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.3 | Scalarhm2AgentRipRoutes | read-only | current | The number of RIP routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.4 | Scalarhm2AgentOspfRoutes | read-only | current | The number of OSPFv2 routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.5 | Scalarhm2AgentOspfIntraRoutes | read-only | current | The number of OSPFv2 intra-area routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.6 | Scalarhm2AgentOspfInterRoutes | read-only | current | The number of OSPFv2 inter-area routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.7 | Scalarhm2AgentOspfExt1Routes | read-only | current | The number of OSPFv2 external type 1 routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.8 | Scalarhm2AgentOspfExt2Routes | read-only | current | The number of OSPFv2 external type 2 routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.9 | Scalarhm2AgentBgpRoutes | read-only | current | The number of BGP routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.10 | Scalarhm2AgentEbgpRoutes | read-only | current | The number of external BGP routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.11 | Scalarhm2AgentIbgpRoutes | read-only | current | The number of internal BGP routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.12 | Scalarhm2AgentLocalBgpRoutes | read-only | current | The number of local BGP routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.13 | Scalarhm2AgentRejectRoutes | read-only | current | The number of reject routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.14 | Scalarhm2AgentTotalRoutes | read-only | current | The number of routes in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.15 | Scalarhm2AgentBestRoutes | read-only | current | The number of IPv4 routes in the forwarding table. |
| 1.3.6.1.4.1.248.12.2.17.16 | Scalarhm2AgentBestRoutesHigh | read-only | current | The highest number of IPv4 routes in the forwarding table. |
| 1.3.6.1.4.1.248.12.2.17.17 | Scalarhm2AgentAlternateRoutes | read-only | current | The number of alternate routes in the IPv4 routing table. An alternate route is less preferred than the best route and is not used for forwarding. |
| 1.3.6.1.4.1.248.12.2.17.18 | Scalarhm2AgentRouteAdds | read-only | current | The number of routes added to the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.19 | Scalarhm2AgentRouteModifies | read-only | current | The number of routes changed in the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.20 | Scalarhm2AgentRouteDeletes | read-only | current | The number of routes removed from the IPv4 routing table. |
| 1.3.6.1.4.1.248.12.2.17.21 | Scalarhm2AgentUnresolvedRouteAdds | read-only | current | The number of IPv4 route adds that failed because none of the route's next hops were on a local subnet. |
| 1.3.6.1.4.1.248.12.2.17.22 | Scalarhm2AgentInvalidRouteAdds | read-only | current | The number of IPv4 routes adds that failed because the route was invalid. |
| 1.3.6.1.4.1.248.12.2.17.23 | Scalarhm2AgentFailedRouteAdds | read-only | current | The number of IPv4 routes adds that failed because of a resource limitation in the routing table |
| 1.3.6.1.4.1.248.12.2.17.24 | Scalarhm2AgentReservedLocals | read-only | current | The number of IPv4 routing table entries reserved for a local subnet on a routing interface that is down. |
| 1.3.6.1.4.1.248.12.2.17.25 | Scalarhm2AgentUniqueNextHops | read-only | current | The number of distinct next hops used among all IPv4 routes currently in the routing table. These include local interfaces for local routes and neighbors for i… |
| 1.3.6.1.4.1.248.12.2.17.26 | Scalarhm2AgentUniqueNextHopsHigh | read-only | current | The highest count of unique next hops since counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.17.27 | Scalarhm2AgentNextHopGroups | read-only | current | The current number of next hop groups in use by one or more routes. Each next hop group includes one or more next hops. |
| 1.3.6.1.4.1.248.12.2.17.28 | Scalarhm2AgentNextHopGroupsHigh | read-only | current | The highest count of next hop groups since counters were last cleared. |
| 1.3.6.1.4.1.248.12.2.17.29 | Scalarhm2AgentEcmpGroups | read-only | current | The number of next hop groups with multiple next hops. |
| 1.3.6.1.4.1.248.12.2.17.30 | Scalarhm2AgentEcmpGroupsHigh | read-only | current | The high water mark of the number of ECMP groups. |
| 1.3.6.1.4.1.248.12.2.17.31 | Scalarhm2AgentEcmpRoutes | read-only | current | The current number of IPv4 routes with multiple next hops. |
| 1.3.6.1.4.1.248.12.2.17.32 | Scalarhm2AgentTruncEcmpRoutes | read-only | current | The number of ECMP routes that are currently installed in the forwarding table with just one next hop. The forwarding table may limit the number of ECMP routes… |
| 1.3.6.1.4.1.248.12.2.17.33 | Scalarhm2AgentEcmpRetries | read-only | current | The number of ECMP routes that have been installed in the forwarding table after initially being installed with a single next hop. |
| 1.3.6.1.4.1.248.12.2.18 | Tablehm2AgentEcmpCountTable | not-accessible | current | A count of the number of routes with each number of ECMP next hops. |
| 1.3.6.1.4.1.248.12.2.18.1 | Rowhm2AgentEcmpCountEntry | not-accessible | current | Number of IPv4 routes with a given number of next hops. |
| 1.3.6.1.4.1.248.12.2.18.1.1 | Columnhm2AgentEcmpNextHopCount | not-accessible | current | The number of next hops in a route. From 0 to the maximum number of next hops in an ECMP route. The maximum varies by platform. |
| 1.3.6.1.4.1.248.12.2.18.1.2 | Columnhm2AgentEcmpRouteCount | read-only | current | The number of IPv4 routes with agentEcmpNextHopCount next hops. |
| 1.3.6.1.4.1.248.12.2.19 | Nodehm2AgentOspfStubRouterGroup | |||
| 1.3.6.1.4.1.248.12.2.19.1 | Scalarhm2AgentOspfStubRouterAdvertisement | read-only | current | Specifies how the router LSAs are advertised by the router. The value doNotAdvertise indicates the advertisement of a standard router LSA and is the default va… |
| 1.3.6.1.4.1.248.12.2.19.2 | Scalarhm2AgentOspfStubRouterReason | read-only | current | This indicates the reason because of which the router is in Stub mode. This is valid only if the agentOspfStubRouterMode is 'active'. |
| 1.3.6.1.4.1.248.12.2.19.3 | Scalarhm2AgentOspfStubRouterStartupTimeRemaining | read-only | current | The time remaining (in seconds) for the router to come out of the stub mode. This is valid only if the agentOspfStubRouterReason is 'startup'. |
| 1.3.6.1.4.1.248.12.2.19.4 | Scalarhm2AgentOspfStubRouterDuration | read-only | current | Time elapsed (in seconds) since the router last entered the stub router mode. This is valid only if the agentOspfStubRouterMode is 'active' and agentOspfStubRo… |
| 1.3.6.1.4.1.248.12.2.249 | Tablehm2AgentOspfNbrTable | not-accessible | current | Information about this router's neighbors. Augments ospfNbrTable from the OSPF-MIB. |
| 1.3.6.1.4.1.248.12.2.249.1 | Rowhm2AgentOspfNbrEntry | not-accessible | current | Information about a single neighbor. Augments ospfNbrEntry in OSPF-MIB. |
| 1.3.6.1.4.1.248.12.2.249.1.1 | Columnhm2AgentOspfNbrDeadTime | read-only | current | The neighbor's Dead Time is the amount of remaining time since the last OSPF hello packet received, before declaring the neighbor status as down. |
| 1.3.6.1.4.1.248.12.2.250 | Tablehm2AgentOspfRouteTable | not-accessible | current | Information about this router's OSPF routes. |
| 1.3.6.1.4.1.248.12.2.250.1 | Rowhm2AgentOspfRouteEntry | not-accessible | current | Information about a single route. |
| 1.3.6.1.4.1.248.12.2.250.1.1 | Columnhm2AgentOspfRouteNet | not-accessible | current | The IP Address of the Net or Subnet indicated by the route. |
| 1.3.6.1.4.1.248.12.2.250.1.2 | Columnhm2AgentOspfRouteMask | not-accessible | current | The Subnet Mask that pertains to the Net or Subnet. |
| 1.3.6.1.4.1.248.12.2.250.1.3 | Columnhm2AgentOspfRouteCost | read-only | current | The route cost calculated in the SPF algorithm to reach the network. |
| 1.3.6.1.4.1.248.12.2.250.1.4 | Columnhm2AgentOspfRouteProtoType | read-only | current | The type of route that was learned from OSPF. |
| 1.3.6.1.4.1.248.12.2.260 | Nodehm2AgentVrrpExtGroup | |||
| 1.3.6.1.4.1.248.12.2.260.1 | Tablehm2AgentVrrpTrackingTable | not-accessible | current | This table contains variables to define an entry in the VRRP Tracking database. |
| 1.3.6.1.4.1.248.12.2.260.1.1 | Rowhm2AgentVrrpTrackingEntry | not-accessible | current | The entries of the table. |
| 1.3.6.1.4.1.248.12.2.260.1.1.1 | Columnhm2AgentVrrpTrackIfIndex | not-accessible | current | DURABLE: { 1:all } The interface number of the virtual router |
| 1.3.6.1.4.1.248.12.2.260.1.1.2 | Columnhm2AgentVrrpTrackVrid | not-accessible | current | DURABLE: { 1:all } The virtual router id for this virtual router |
| 1.3.6.1.4.1.248.12.2.260.1.1.3 | Columnhm2AgentVrrpTrackId | not-accessible | current | DURABLE: { 1:all } The id of the object being tracked |
| 1.3.6.1.4.1.248.12.2.260.1.1.4 | Columnhm2AgentVrrpTrackDecrement | read-write | current | DURABLE: { 1:all } The value by wich the current priority of the virtual router is decremented when the tracked object goes DOWN. |
| 1.3.6.1.4.1.248.12.2.260.1.1.5 | Columnhm2AgentVrrpTrackOperStatus | read-only | current | Shows if the tracked object is currently UP or DOWN or NOT-READY |
| 1.3.6.1.4.1.248.12.2.260.1.1.6 | Columnhm2AgentVrrpTrackRowStatus | read-create | current | DURABLE: { 1:all } Defines the status of a vrrp tracking database entry. Set to createAndGo(4) to create a new row. Set to destroy(6) to delete an entry. Reads… |
| 1.3.6.1.4.1.248.12.2.260.2 | Tablehm2AgentVrrpExtTable | not-accessible | current | This table contains variables to define an entry in the VRRP enhancements database. |
| 1.3.6.1.4.1.248.12.2.260.2.1 | Rowhm2AgentVrrpExtEntry | not-accessible | current | The entry of the hm2AgentVrrpExtTable. |
| 1.3.6.1.4.1.248.12.2.260.2.1.1 | Columnhm2AgentVrrpExtIfIndex | not-accessible | current | The interface number of the virtual router |
| 1.3.6.1.4.1.248.12.2.260.2.1.2 | Columnhm2AgentVrrpExtVrid | not-accessible | current | The virtual router id for this virtual router |
| 1.3.6.1.4.1.248.12.2.260.2.1.3 | Columnhm2AgentVrrpExtDomainId | read-write | current | The domain this virtual router is a member of. If set to 0, the virtual router is not a member of any domain. |
| 1.3.6.1.4.1.248.12.2.260.2.1.4 | Columnhm2AgentVrrpExtDomainRole | read-write | current | The role of this virtual router in its domain. This is none(1) if the virtual router is not member of a domain, supervisor(3) if it is the supervisor of its do… |
| 1.3.6.1.4.1.248.12.2.260.2.1.5 | Columnhm2AgentVrrpExtDomainStatus | read-only | current | Shows if the domain configuration is correct for this virtual router |
| 1.3.6.1.4.1.248.12.2.260.2.1.6 | Columnhm2AgentVrrpExtAdvertAddress | read-write | current | The IP address advertisements of the virtual router are sent to |
| 1.3.6.1.4.1.248.12.2.260.2.1.7 | Columnhm2AgentVrrpExtAdvertTimer | read-write | current | This is used to set the interval between advertisements in milliseconds. This accesses the same value as vrrpOperAdvertisementInterval. |
| 1.3.6.1.4.1.248.12.2.260.2.1.8 | Columnhm2AgentVrrpExtCfgPriority | read-write | current | The configured priority of the virtual router. This can be different from the operating priority if tracked objects are down or the virtual router is the ip ad… |
| 1.3.6.1.4.1.248.12.2.260.2.1.9 | Columnhm2AgentVrrpExtNotifyAddress | read-write | current | The IP address notifications of the virtual router are sent to |
| 1.3.6.1.4.1.248.12.2.260.2.1.10 | Columnhm2AgentVrrpExtNotifyLinkdown | read-write | current | Enables or disables sending of notification messages if the virtual router's interface goes down. |
| 1.3.6.1.4.1.248.12.2.260.2.1.11 | Columnhm2AgentVrrpExtPreemptionDelay | read-write | current | Time (in seconds) after startup of the virtual router by which the preemption of a Master with a lower priority is delayed. |
| 1.3.6.1.4.1.248.12.2.260.2.1.12 | Columnhm2AgentVrrpPrimaryVirtualAddress | read-only | current | The virtual IP address in the subnet of the primary ip address on the interface. If no match is found, an unspecified virtual address is returned. If no virtua… |
| 1.3.6.1.4.1.248.12.2.260.2.1.13 | Columnhm2AgentVrrpExtMethod | read-write | current | The source of the VRRP instance. User can set the object to none(1), config(2), ttdp(3). |
| 1.3.6.1.4.1.248.12.2.260.2.1.14 | Columnhm2AgentVrrpExtProxyarp | read-write | current | This object specifies if proxy arp functionality must be associated with a vrrp instance. Possible values: - true: enable proxy arp on change of vrrpOperState … |
| 1.3.6.1.4.1.248.12.2.260.3 | Tablehm2AgentVrrpDomainTable | not-accessible | current | This table contains variables to define an entry in the VRRP domain database. |
| 1.3.6.1.4.1.248.12.2.260.3.1 | Rowhm2AgentVrrpDomainEntry | not-accessible | current | The entries of the table. |
| 1.3.6.1.4.1.248.12.2.260.3.1.1 | Columnhm2AgentVrrpDomainId | not-accessible | current | The domain ID. |
| 1.3.6.1.4.1.248.12.2.260.3.1.2 | Columnhm2AgentVrrpDomainMemberSendAdv | read-write | current | DURABLE: { 1:all } Determines if the members of this domain send advertisement packets. If set to disabled(2), only the supervisor of the domain sends packets. |
| 1.3.6.1.4.1.248.12.2.260.3.1.3 | Columnhm2AgentVrrpDomainStatus | read-only | current | Shows if the configuration of the domain is complete. |
| 1.3.6.1.4.1.248.12.2.260.3.1.4 | Columnhm2AgentVrrpDomainSupervisorIfIndex | read-only | current | The interface number of the supervisor of the domain |
| 1.3.6.1.4.1.248.12.2.260.3.1.5 | Columnhm2AgentVrrpDomainSupervisorVrid | read-only | current | The virtual router id of the supervisor of the domain. 0 if unconfigured |
| 1.3.6.1.4.1.248.12.2.260.3.1.6 | Columnhm2AgentVrrpDomainOperPriority | read-only | current | The current operating priority of the domain. This can be different from the configured priority if tracked objects are down. For domain members this is the pr… |
| 1.3.6.1.4.1.248.12.2.260.3.1.7 | Columnhm2AgentVrrpDomainSupervisorOperState | read-only | current | Shows the current operational state of the domain supervisor. |
| 1.3.6.1.4.1.248.12.2.270 | Nodehm2AgentNeighbourGroup | |||
| 1.3.6.1.4.1.248.12.2.270.10 | Tablehm2AgentStaticNeighbourTable | not-accessible | current | . |
| 1.3.6.1.4.1.248.12.2.270.10.1 | Rowhm2AgentStaticNeighbourEntry | not-accessible | current | . |
| 1.3.6.1.4.1.248.12.2.270.10.1.1 | Columnhm2AgentStaticNeighbourAddressType | not-accessible | current | . |
| 1.3.6.1.4.1.248.12.2.270.10.1.2 | Columnhm2AgentStaticNeighbourAddress | not-accessible | current | . |
| 1.3.6.1.4.1.248.12.2.270.10.1.3 | Columnhm2AgentStaticNeighbourPhysAddress | read-create | current | . |
| 1.3.6.1.4.1.248.12.2.270.10.1.4 | Columnhm2AgentStaticNeighbourIfIndex | read-only | current | . |
| 1.3.6.1.4.1.248.12.2.270.10.1.5 | Columnhm2AgentStaticNeighbourRowStatus | read-create | current | The status of this entry. Setting this object destroy will remove the entry. |
| 1.3.6.1.4.1.248.12.2.270.11 | Tablehm2AgentDynamicNeighbourTable | not-accessible | current | . |
| 1.3.6.1.4.1.248.12.2.270.11.1 | Rowhm2AgentDynamicNeighbourEntry | not-accessible | current | . |
| 1.3.6.1.4.1.248.12.2.270.11.1.1 | Columnhm2AgentDynamicNeighbourAddressType | not-accessible | current | . |
| 1.3.6.1.4.1.248.12.2.270.11.1.2 | Columnhm2AgentDynamicNeighbourAddress | not-accessible | current | . |
| 1.3.6.1.4.1.248.12.2.270.11.1.3 | Columnhm2AgentDynamicNeighbourPhysAddress | read-only | current | . |
| 1.3.6.1.4.1.248.12.2.270.11.1.4 | Columnhm2AgentDynamicNeighbourIfIndex | read-only | current | . |
| 1.3.6.1.4.1.248.12.2.270.11.1.5 | Columnhm2AgentDynamicNeighbourAction | read-write | current | . |
| 1.3.6.1.4.1.248.12.2.280 | Nodehm2AgentRoutingSNMPExtensionGroup | |||
| 1.3.6.1.4.1.248.12.2.280.1 | Identityhm2AgentIpHelperTableFullErrorReturn | current | The maximum number of IP helper entries has been reached | |
| 1.3.6.1.4.1.248.12.2.280.2 | Identityhm2AgentIpHelperInvalidServerAddrErrorReturn | current | Invalid IP server address. | |
| 1.3.6.1.4.1.248.12.2.280.3 | Identityhm2AgentRouterOspfDependenciesNotMet | current | Cannot modify OSPF admin state on this interface. Set primary IP address. | |
| 1.3.6.1.4.1.248.12.2.280.4 | Identityhm2AgentRouterOspfRangeTableFullErrorReturn | current | The maximum number of area-range entries has been reached. | |
| 1.3.6.1.4.1.248.12.2.280.5 | Identityhm2AgentRouterOspfVirtNbrTableFullErrorReturn | current | The maximum number of virtual neighbor entries has been reached. | |
| 1.3.6.1.4.1.248.12.2.280.8 | Identityhm2AgentRouterRIPDependenciesNotMet | current | Cannot modify RIP admin state on this interface. Set primary IP address. | |
| 1.3.6.1.4.1.248.12.2.280.9 | Identityhm2AgentIpHelperInvalidUdpPortErrorReturn | current | Invalid UDP port. | |
| 1.3.6.1.4.1.248.12.2.280.10 | Identityhm2AgentStaticNeighbourTableFullErrorReturn | current | Static Neighbour Table is full. | |
| 1.3.6.1.4.1.248.12.2.280.11 | Identityhm2AgentSecondaryAddrNoPrimaryErrorReturn | current | Cannot add the secondary IP address because the interface has no primary IP address. | |
| 1.3.6.1.4.1.248.12.2.280.12 | Identityhm2AgentSecondaryAddrDifferentPrimaryErrorReturn | current | The secondary IP address must be different from the primary IP address. | |
| 1.3.6.1.4.1.248.12.2.280.13 | Identityhm2AgentSecondaryAddrWrongIpClassErrorReturn | current | The network number of the secondary IP address is not valid to be used on a routing interface. | |
| 1.3.6.1.4.1.248.12.2.280.14 | Identityhm2AgentSecondaryAddrWrongSubnetErrorReturn | obsolete | All IP addresses on the interface must be from different subnets. | |
| 1.3.6.1.4.1.248.12.2.280.15 | Identityhm2AgentSecondaryAddrMaxIntfEntriesErrorReturn | current | The maximum number of secondary IP addresses on the interface has been reached. | |
| 1.3.6.1.4.1.248.12.2.280.16 | Identityhm2AgentSecondaryAddrMaxSystemEntriesErrorReturn | current | The maximum number of IP addresses on the system has been reached. | |
| 1.3.6.1.4.1.248.12.2.280.17 | Identityhm2AgentSecondaryAddrStaticRouteErrorReturn | current | The secondary IP address is same as the next hop address of a static route. | |
| 1.3.6.1.4.1.248.12.2.280.18 | Identityhm2AgentSecondaryAddrStaticARPErrorReturn | current | The secondary IP address is same as a static ARP entry. | |
| 1.3.6.1.4.1.248.12.2.280.19 | Identityhm2AgentSecondaryAddrAbsentEntryErrorReturn | current | The secondary IP address is not configured on the interface. | |
| 1.3.6.1.4.1.248.12.2.280.20 | Identityhm2AgentPrimaryAddrWrongIpClassErrorReturn | current | The primary IP address is out of the allowed IP class. | |
| 1.3.6.1.4.1.248.12.2.280.21 | Identityhm2AgentPrimaryAddrConflictErrorReturn | obsolete | The primary IP address conflicts with another IP address on a routing interface. | |
| 1.3.6.1.4.1.248.12.2.280.22 | Identityhm2AgentPrimaryAddrStaticRouteErrorReturn | current | The primary IP address is same as the next hop address of a static route. | |
| 1.3.6.1.4.1.248.12.2.280.23 | Identityhm2AgentPrimaryAddrStaticARPErrorReturn | current | The primary IP address is same as a static ARP entry. | |
| 1.3.6.1.4.1.248.12.2.280.24 | Identityhm2AgentPrimaryAddrExistingSecondaryErrorReturn | current | The primary IP address cannot be changed because the interface has secondary IP addresses configured. | |
| 1.3.6.1.4.1.248.12.2.280.25 | Identityhm2AgentPrimaryAddrNetworkConflictErrorReturn | obsolete | The primary IP address conflicts with the management IP address. | |
| 1.3.6.1.4.1.248.12.2.280.26 | Identityhm2AgentPrimaryAddrRoutingTableFullErrorReturn | current | The primary IP address cannot be added because there are no free entries in the routing table. | |
| 1.3.6.1.4.1.248.12.2.280.27 | Identityhm2AgentDstAddrHostBitSetErrorReturn | current | The route cannot be added. Host bits must not be set in the destination. Network address is {0}. | |
| 1.3.6.1.4.1.248.12.2.280.28 | Identityhm2AgentSamePrefRouteErrorReturn | current | Route cannot be added because reject route and next hop route cannot share the same preference. | |
| 1.3.6.1.4.1.248.12.2.280.29 | Identityhm2AgentVrrpAssoIpAddrRowStatusInconsistentAddress | current | The virtual address does not matching the current interface address configuration. | |
| 1.3.6.1.4.1.248.12.2.280.30 | Identityhm2AgentVrrpAssoIpAddrRowStatusInvalidAddress | current | The virtual address is not valid with the current interface address configuration. | |
| 1.3.6.1.4.1.248.12.2.280.31 | Identityhm2AgentVrrpAssoIpAddrRowStatusUnknownVRID | current | Unknown virtual router id. | |
| 1.3.6.1.4.1.248.12.2.280.32 | Identityhm2AgentSwitchIpRouterDiscMinMaxAdvtIntErrorRtrn | current | Min advertisement interval is bigger then max advertisement interval. | |
| 1.3.6.1.4.1.248.12.2.280.33 | Identityhm2AgentSwitchIpRouterDiscLifeTimeMaxAdvIntErrorRtrn | current | Max advertisement interval is bigger then advertisement life time. | |
| 1.3.6.1.4.1.248.12.2.280.34 | Identityhm2AgentSwitchIpIcmpRateLimitExceedingRatioErrorReturn | current | Rate limit ratio exceeds 100 packets per second. | |
| 1.3.6.1.4.1.248.12.2.280.35 | Identityhm2AgentRouterOspfMaxAreaErrorReturn | current | The maximum number of OSPF areas has been reached. | |
| 1.3.6.1.4.1.248.12.2.280.36 | Identityhm2AgentospfRouterIdChange | current | OSPF must be disabled to change the router ID. | |
| 1.3.6.1.4.1.248.12.2.280.37 | Identityhm2AgentOspfRedistDistList | current | Please add a redistribute list. | |
| 1.3.6.1.4.1.248.12.2.280.38 | Identityhm2AgentOspfDefaultAreaDeleteErrorReturn | current | The default area cannot be deleted. | |
| 1.3.6.1.4.1.248.12.2.280.39 | Identityhm2AgentLocalArpDeleteErrorReturn | current | Local ARP entries cannot be deleted. | |
| 1.3.6.1.4.1.248.12.2.280.40 | Identityhm2AgentDynamicVlanRoutingErrorReturn | current | Dynamic VLANs cannot be used for routing interfaces. | |
| 1.3.6.1.4.1.248.12.2.280.41 | Identityhm2AgentVlanUnawareRoutingErrorReturn | current | Routing cannot be used together with the vlan unaware mode. | |
| 1.3.6.1.4.1.248.12.2.280.42 | Identityhm2AgentRoutingInvalidNetworkAddress | current | Indicates that the routing table entry contains an invalid value for network address that cannot be processed. | |
| 1.3.6.1.4.1.248.12.2.280.43 | Identityhm2AgentRoutingTypeInvalidValue | current | Indicates that the type is invalid. | |
| 1.3.6.1.4.1.248.12.2.280.44 | Identityhm2AgentRoutingLocalRoutePreference | current | Indicates that the local type and local protocol should have the preference value zero. | |
| 1.3.6.1.4.1.248.12.2.280.45 | Identityhm2AgentRoutingMetricInvalid | current | Indicates that the routing table entry contains an invalid value for metric that cannot be processed. | |
| 1.3.6.1.4.1.248.12.2.280.46 | Identityhm2AgentRoutingMetricNotSupported | current | Indicates that the route metric except 1 is not supported and cannot be set. | |
| 1.3.6.1.4.1.248.12.2.280.47 | Identityhm2AgentRoutingNexthopAtLocalInterface | current | Indicates that the entry has Nexthop address that is set on a local interface. | |
| 1.3.6.1.4.1.248.12.2.280.48 | Identityhm2AgentRoutingNexthopInvalid | current | Indicates that the routing table entry contains an invalid value for next hop IP address that cannot be processed. | |
| 1.3.6.1.4.1.248.12.2.280.49 | Identityhm2AgentRoutingMaxEntryCountReached | current | Indicates that the route entry cannot be added as maximum count has reached. | |
| 1.3.6.1.4.1.248.12.2.280.50 | Identityhm2AgentRoutingNoPreferenceUpdate | current | Indicates that the preference value cannot be updated. | |
| 1.3.6.1.4.1.248.12.2.280.51 | Identityhm2AgentRoutingPortInvalid | current | Indicates that the routing table entry contains an invalid value for port that cannot be processed. | |
| 1.3.6.1.4.1.248.12.2.280.52 | Identityhm2AgentRoutingStaticRoutePreference | current | Indicates that the remote type and netmgmt protocol should have the preference value in range 1..255. | |
| 1.3.6.1.4.1.248.12.2.280.53 | Identityhm2AgentRoutingSameNetworkAddrErrorReturn | current | Indicates that the entry with same network address already exists. | |
| 1.3.6.1.4.1.248.12.2.280.54 | Identityhm2AgentRoutingTypeInvalid | current | Indicates that the routing table entry contains an invalid value for route type that cannot be processed. | |
| 1.3.6.1.4.1.248.12.2.280.55 | Identityhm2AgentRoutingMacAddressInvalid | current | Indicates that the entry contains an invalid value for MAC address that cannot be processed. | |
| 1.3.6.1.4.1.248.12.2.280.56 | Identityhm2AgentRoutingIPAddressExist | current | Indicates that IP address already exists. | |
| 1.3.6.1.4.1.248.12.2.280.57 | Identityhm2AgentRoutingPingPortInvalid | current | Indicates that the ping port contains an invalid value that cannot be processed. | |
| 1.3.6.1.4.1.248.12.2.280.58 | Identityhm2AgentRoutingIntervalTimeInvalid | current | Indicates that the tracking configuration entry contains invalid characters or is out of range for ping interval time that cannot be processed. The allowed ran… | |
| 1.3.6.1.4.1.248.12.2.280.59 | Identityhm2AgentRoutingPingLoseTimeInvalid | current | Indicates that the tracking configuration entry contains invalid characters or is out of range for ping replies to lose time that cannot be processed. The allo… | |
| 1.3.6.1.4.1.248.12.2.280.60 | Identityhm2AgentRoutingPingReceiveTimeInvalid | current | Indicates that the tracking configuration entry contains invalid characters or is out of range for ping replies to receive time that cannot be processed. The a… | |
| 1.3.6.1.4.1.248.12.2.280.61 | Identityhm2AgentRoutingPingTimeoutInvalid | current | Indicates that the tracking configuration entry contains invalid characters or is out of range for ping timeout that cannot be processed. The allowed range is … | |
| 1.3.6.1.4.1.248.12.2.280.62 | Identityhm2AgentRoutingPingTTLInvalid | current | Indicates that the tracking configuration entry contains invalid characters or is out of range for ping TTL that cannot be processed. The allowed range is 1..1… | |
| 1.3.6.1.4.1.248.12.2.280.63 | Identityhm2AgentRoutingLogicalOperandInvalid | current | Indicates that the tracking configuration entry contains an invalid value for logical operand A|B that cannot be processed. | |
| 1.3.6.1.4.1.248.12.2.280.64 | Identityhm2AgentRoutingOperatorInvalid | current | Indicates that the tracking configuration entry contains an invalid value for operator that cannot be processed. Possible values 'and' and 'or'. | |
| 1.3.6.1.4.1.248.12.2.280.65 | Identityhm2AgentRoutingLinkDelayInvalid | current | Indicates that the tracking configuration entry contains an invalid value for link up/down delay which is out of range and cannot be processed. The allowed ran… | |
| 1.3.6.1.4.1.248.12.2.280.66 | Identityhm2AgentRoutingL3RelayFunctionInvalid | current | Indicates that the L3 relay function contains an invalid value that cannot be processed. | |
| 1.3.6.1.4.1.248.12.2.280.67 | Identityhm2AgentRoutingBootpDhcpHopsInvalid | current | Indicates that L3 configuration entry contains invalid characters or is out of range for bootp/dhcp hops (max.) that cannot be processed. The allowed range is … | |
| 1.3.6.1.4.1.248.12.2.280.68 | Identityhm2AgentRoutingBootpDhcpWaitTimeInvalid | current | Indicates that L3 configuration entry contains invalid characters or is out of range for bootp/dhcp wait time (min.) that cannot be processed. The allowed rang… | |
| 1.3.6.1.4.1.248.12.2.280.69 | Identityhm2AgentRoutingCircuitIDInvalid | current | Indicates that the tracking configuration entry contains an invalid value for circuit ID that cannot be processed. | |
| 1.3.6.1.4.1.248.12.2.280.70 | Identityhm2AgentRoutingTrackTypeEnableError | current | Indicates that the process of enabling tracking instance {0} has failed because track type is invalid. | |
| 1.3.6.1.4.1.248.12.2.280.71 | Identityhm2AgentRoutingTrackingEnableErrorReturn | current | Indicates that the process of enabling tracking instance {0} admin state has failed. | |
| 1.3.6.1.4.1.248.12.2.280.72 | Identityhm2AgentRoutingTrackingDisableErrorReturn | current | Indicates that the process of disabling tracking instance {0} admin state has failed. | |
| 1.3.6.1.4.1.248.12.2.280.73 | Identityhm2AgentRoutingTrackTypeDisableError | current | Indicates that the process of disabling tracking instance {0} has failed because track type is invalid. | |
| 1.3.6.1.4.1.248.12.2.280.74 | Identityhm2AgentRoutingTrackIDCreateError | current | Indicates that the creation of tracking instance {0} has failed because track ID is invalid. | |
| 1.3.6.1.4.1.248.12.2.280.75 | Identityhm2AgentRoutingTrackTypeCreateError | current | Indicates that the creation of tracking instance {0} has failed because track type is invalid. |