HP-ICF-OSPFV3-MIB
175 objects
The MIB module contains HP proprietary extensions to the OSPFV3-MIB module.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.44 | IdentityhpicfOspfv3MIB | The MIB module contains HP proprietary extensions to the OSPFV3-MIB module. | ||
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1 | NodehpicfOspfv3Objects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1 | NodehpicfOspfv3GeneralGroup | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.1 | ScalarhpicfOspfv3DefaultImportMetric | read-write | current | The default metric used for advertising external routes by this router. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.2 | ScalarhpicfOspfv3DefaultImportMetricType | read-write | current | The default metric type used for advertising external routes by this router. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.3 | ScalarhpicfOspfv3IntraAreaDistance | read-write | current | The administrative distance to associate with intra-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an adm… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.4 | ScalarhpicfOspfv3InterAreaDistance | read-write | current | The administrative distance to associate with inter-area routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an adm… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.5 | ScalarhpicfOspfv3ExternalDistance | read-write | current | The administrative distance to associate with AS-external routes learned by OSPF. Routes with lower distances are preferred. By default, OSPF routes have an ad… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.7 | ScalarhpicfOspfv3SpfThrottleStartInterval | read-write | current | Initial SPF schedule delay |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.8 | ScalarhpicfOspfv3SpfThrottleWaitInterval | read-write | current | Minimum wait time between two consecutive SPFs When spf throttle is triggered. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.9 | ScalarhpicfOspfv3SpfThrottleMaxWaitTime | read-write | current | Maximum time between two consecutive SPFs runs when spf throttling active. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.10 | ScalarhpicfOspfv3SpfThrottleCurrentSpfInterval | read-only | current | Current dynamic wait interval between SPF computations |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.11 | ScalarhpicfOspfv3AreaCount | read-only | current | Number of areas in a router |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.12 | ScalarhpicfOspfv3RestartHelper | read-only | current | Graceful restart helper status A value of true (1) indicates that Restart helper is enabled, false(2) indicates that Restart helper is disabled. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.13 | ScalarhpicfOspfv3ASscopeUnknownLsaCount | read-only | current | The total number of AS-scope unknown link state advertisements received. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.14 | ScalarhpicfOspfv3LinkLsdbStatLinkLsa | read-only | current | This object indicates total number of Link LSAs in the router. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.15 | ScalarhpicfOspfv3TotalUnknownLsa | read-only | current | This object indicates total number of LSAs received with Unknown type. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.1.16 | ScalarhpicfOspfv3ReferenceCost | read-write | current | The reference cost is used as global configuration for internal area cost & vlan cost. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2 | TablehpicfOspfv3AsLsdbTable | not-accessible | current | The OSPFv3 AS-Scope Link State Database (LSDB). The LSDB contains the AS-Scope Link State Advertisements from throughout the areas that the device is attached … |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1 | RowhpicfOspfv3AsLsdbEntry | not-accessible | current | A single AS-Scope Link State Advertisement. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.1 | ColumnhpicfOspfv3AsLsdbEFTFlags | read-only | current | A 32-bit integer Representing the E,F and T bit flags |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.2 | ColumnhpicfOspfv3AsLsdbMetric | read-only | current | The cost associated with this route. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.3 | ColumnhpicfOspfv3AsLsdbPrefixLength | read-only | current | The Prefix Length of the Address Prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.4 | ColumnhpicfOspfv3AsLsdbPrefixOptions | read-only | current | The Prefix Options associated with the Address Prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.5 | ColumnhpicfOspfv3AsLsdbRefLsType | read-only | current | If non-zero value, this refers to another LSA type in Link State Database further identified by the Reference Link State ID field |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.6 | ColumnhpicfOspfv3AsLsdbAddrPrefix | read-only | current | The advertised 16-byte Address Prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.7 | ColumnhpicfOspfv3AsLsdbFwdingAddress | read-only | current | If included, Data traffic for the advertised destination will be forwarded to this address. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.8 | ColumnhpicfOspfv3AsLsdbExtRouteTags | read-only | current | The 32-bit Route Tag for the advertised Route. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.9 | ColumnhpicfOspfv3AsLsdbRefLsId | read-only | current | The 32-bit Link state ID of the referenced LSA entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.10 | ColumnhpicfOspfv3AsLsdbLsaLength | read-only | current | This field describes the length of LSA. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3 | TablehpicfOspfv3AreaLsdbTable | not-accessible | current | The OSPFv3 Area-Scope link state database. The LSDB contains the Area-Scope Link State Advertisements from throughout the area that the device is attached to. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1 | RowhpicfOspfv3AreaLsdbEntry | not-accessible | current | A single Area-Scope Link State Advertisement. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.1 | ColumnhpicfOspfv3AreaLsdbRtrCapBits | read-only | current | This field is valid only for Router LSA. It represents the capabilities of the router in the Area. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.2 | ColumnhpicfOspfv3AreaLsdbOptions | read-only | current | The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers. This… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.3 | ColumnhpicfOspfv3AreaLsdbMetric | read-only | current | This field is valid only for Router LSA, a Inter-Area_prefix LSA or a NSSA LSA. This field indicates the cost involved in using the interface or route. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.4 | ColumnhpicfOspfv3AreaLsdbPrefixLength | read-only | current | The Prefix Length of the Address Prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.5 | ColumnhpicfOspfv3AreaLsdbPrefixOptions | read-only | current | The Prefix Options associated with the Address Prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.6 | ColumnhpicfOspfv3AreaLsdbAddrPrefix | read-only | current | The advertised 16-byte Address Prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.7 | ColumnhpicfOspfv3AreaLsdbDstRtrId | read-only | current | The Router ID of the router being described by the LSA. This field is valid if the LSA is a Inter-Area-Router LSA. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.8 | ColumnhpicfOspfv3AreaLsdbNumPrefixes | read-only | current | This field is valid only for Inter-Area-Prefix LSA and indicates the number of prefixes in the LSA. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.9 | ColumnhpicfOspfv3AreaLsdbRefLsType | read-only | current | This field is valid only for Inter-Area-Prefix LSA or a NSSA LSA. If non-zero, an LSA with this LS type is to be associated with this LSA. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.10 | ColumnhpicfOspfv3AreaLsdbRefLsId | read-only | current | This field is valid only for Inter-Area-Prefix LSA or a NSSA LSA. This field is included only if the Reference LS Type field is set and identifies the LSA with… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.11 | ColumnhpicfOspfv3AreaLsdbRefAdvRtrId | read-only | current | This field is valid only for Inter-Area-Prefix LSA or a NSSA LSA. This field is included only if the Reference LS Type field is set and identifies the LSA havi… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.12 | ColumnhpicfOspfv3AreaLsdbEFTFlags | read-only | current | This field is valid only for NSSA LSA. This field represents the E,F and T bit flags |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.13 | ColumnhpicfOspfv3AreaLsdbFwdingAddress | read-only | current | This field is valid only for NSSA LSA. This field is present only if the 'F' Bit is set in the EFT flags field and if included, the data traffic for the advert… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.14 | ColumnhpicfOspfv3AreaLsdbExtRouteTags | read-only | current | This field is valid only for NSSA LSA. This field is present only if the 'T' Bit is set in the EFT flags field. A 32-bit field which may be used to communicate… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.15 | ColumnhpicfOspfv3AreaLsdbLsaLength | read-only | current | This field describes the length of LSA. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.16 | ColumnhpicfOspfv3AreaLsdbLinks | read-only | current | This field describes the number of links. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.4 | TablehpicfOspfv3LinkLsdbTable | not-accessible | current | The OSPFv3 Link-Scope link state database(LSDB) for non-virtual interfaces. The LSDB contains the Link-Scope Link State Advertisements from the interfaces that… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1 | RowhpicfOspfv3LinkLsdbEntry | not-accessible | current | A single Link-Scope Link State Advertisement. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.1 | ColumnhpicfOspfv3LinkLsdbRtrPriority | read-only | current | This field is the OSPF priority set for this router |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.2 | ColumnhpicfOspfv3LinkLsdbOptions | read-only | current | The Options field enables OSPF routers to support (or not support) optional capabilities, and to communicate their capability level to other OSPF routers. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.3 | ColumnhpicfOspfv3LinkLsdbLocalAddress | read-only | current | The advertising router's link local IPv6 address |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.4 | ColumnhpicfOspfv3LinkLsdbNumPrefixes | read-only | current | The number of other links on the advertising router |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.5 | ColumnhpicfOspfv3LinkLsdbLsaLength | read-only | current | This field describes the length of LSA. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.5 | TablehpicfOspfv3IfTable | not-accessible | current | The table describes the Ospfv3 interfaces. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1 | RowhpicfOspfv3IfEntry | not-accessible | current | The Entry describes one Ospfv3 interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.1 | ColumnhpicfOspfv3IfPassive | read-create | current | The passive state configuration of the OSPF interface. In the passive mode no OSPF protocol messages are exchanged on this interface. true (1) - The interface … |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.2 | ColumnhpicfOspfv3IfNbrCount | read-only | current | This object specifies the number of OSPFv3 neighbors reachable via this interface. This counter should be incremented when a new neighbor is added in the netwo… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.10 | ColumnhpicfOspfv3IfDRAddr | read-only | current | This object specifies link local ipv6 address of Designated Router on the interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.11 | ColumnhpicfOspfv3IfBDRAddr | read-only | current | This object specifies link local ipv6 address of Backup Designated Router on the interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.12 | ColumnhpicfOspfv3IfHelloDueTime | read-only | current | This object specifies the time remaining for the hello timer for the particular Interface to expire. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.13 | ColumnhpicfOspfv3IfAdjNbrCount | read-only | current | This object specifies the number of fully adjacent neighbors present on this interface. This counter should be incremented when a new neighbor becomes fully ad… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.6 | TablehpicfOspfv3NbrTable | not-accessible | current | A table describing all neighbors of the of the OSPFv3 router. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1 | RowhpicfOspfv3NbrEntry | not-accessible | current | The information regarding a single neighbor. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.1 | ColumnhpicfOspfv3NbrUpTime | read-only | current | This object specifies the time duration in seconds for which the adjacency with a particular neighbor is active. This should be a monotonically increasing time… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.2 | ColumnhpicfOspfv3NbrTimeToExpiry | read-only | current | This object specifies the time remaining for the dead timer for the particular neighbor to expire. This counter thus specifies the time in seconds left for an … |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.3 | ColumnhpicfOspfv3NbrDataBaseSummary | read-only | current | The number of Link State Advertisements (LSA) sent in Database Description (DD)packet. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.4 | ColumnhpicfOspfv3NbrLinkStateRequest | read-only | current | The number of Link State Advertisements (LSA) in link state request list. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.5 | ColumnhpicfOspfv3NbrRestartState | read-only | current | Describes the Graceful Restart(GR) state. normal(0) - Indicates normal status helper(1) - Helper indicates the router is helping another router which is curren… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7 | TablehpicfOspfv3IfStatsTable | not-accessible | current | Table that contains OSPFv3 Interface traffic specific statistics. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1 | RowhpicfOspfv3IfStatsEntry | not-accessible | current | A list of statistics counters maintained for an OSPFv3 interface traffic information. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.1 | ColumnhpicfOspfv3IfSentHelloPkt | read-only | current | The number of OSPFv3 Hello packets sent on the interface. This number is incremented each time an OSPFv3 Hello packet is sent out of an OSPFv3 enabled interfac… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.2 | ColumnhpicfOspfv3IfSentDDPkt | read-only | current | The number of Database Description packets sent on the interface. This number is incremented each time an OSPFv3 DD packet is sent out of an OSPFv3 enabled int… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.3 | ColumnhpicfOspfv3IfSentLSRPkt | read-only | current | The number of Link State Request packets sent on the interface. This number is incremented each time OSPFv3 LSR packet is sent out of an OSPFv3 enabled interfa… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.4 | ColumnhpicfOspfv3IfSentLSUPkt | read-only | current | The number of Link State Update packets sent on the interface. This number is incremented each time OSPFv3 LSU packet is sent out of an OSPFv3 enabled interfac… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.5 | ColumnhpicfOspfv3IfSentLSAPkt | read-only | current | The number of Link State Acknowledgement packet sent on the interface. This number is incremented each time OSPFv3 LS Ack packet is sent out of an OSPFv3 enabl… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.6 | ColumnhpicfOspfv3IfRcvdHelloPkt | read-only | current | The number of Hello packets received on the interface. This number is incremented each time a hello packet is received on OSPFv3 enabled interface. Discontinui… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.7 | ColumnhpicfOspfv3IfRcvdDDPkt | read-only | current | The number of Database Description packets received on the interface. This number is incremented each time a OSPFv3 DD packet is received on OSPFv3 enabled int… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.8 | ColumnhpicfOspfv3IfRcvdLSRPkt | read-only | current | The number of Link State Request packets received on the interface. This number is incremented each time a OSPFv3 LSR packet is received on OSPFv3 enabled inte… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.9 | ColumnhpicfOspfv3IfRcvdLSUPkt | read-only | current | The number of Link State Update packets received on the interface. This number is incremented each time an OSPFv3 LSU packet is received on OSPFv3 enabled inte… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.10 | ColumnhpicfOspfv3IfRcvdLSAPkt | read-only | current | The number of Link State Acknowledgement packets received on the interface. This number is incremented each time a OSPF LS Ack packet is received on OSPFv3 ena… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.11 | ColumnhpicfOspfv3IfSentTotalErrorCount | read-only | current | This refers to the number of erroneous packets discarded on an OSPFv3 interface while sending errors. Discontinuities in the value of this counter can occur at… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.12 | ColumnhpicfOspfv3IfRcvdTotalErrorCount | read-only | current | This refers to the number of erroneous packets received on an OSPFv3 interface. Discontinuities in the value of this counter can occur at re-initialization of … |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.8 | TablehpicfOspfv3IfErrorTable | not-accessible | current | Table that contains OSPFv3 Interface traffic specific error information. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1 | RowhpicfOspfv3IfErrorEntry | not-accessible | current | A list of error counters maintained for an OSPFv3 interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1.1 | ColumnhpicfOspfv3IfErrorType | not-accessible | current | This refers to the type of errors in the OSPFv3 packet received on an OSPFv3 enabled interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1.2 | ColumnhpicfOspfv3IfErrorCount | read-only | current | This refers to the number of erroneous packets received on an OSPFv3 interface for each error type. Discontinuities in the value of this counter can occur at r… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.9 | TablehpicfOspfv3IfClearStatsTable | not-accessible | current | A list used to clear statistics information maintained for an OSPFv3 interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.9.1 | RowhpicfOspfv3IfClearStatsEntry | not-accessible | current | A list used to clear statistics information maintained for an OSPFv3 interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.9.1.1 | ColumnhpicfOspfv3ClearCounters | read-write | current | When this variable is set to true for a given vlan interface, correspondiing interface counters will be cleared. Read of this will always be false. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.10 | TablehpicfOspfv3SpfTable | not-accessible | current | Table that contains OSPFv3 SPF execution details. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1 | RowhpicfOspfv3SpfEntry | not-accessible | current | A list of OSPFv3 SPF algorithm execution details. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1.1 | ColumnhpicfOspfv3SpfIndex | not-accessible | current | The index in spf table. This can range from 1 to 100 as only last hundred SPF run's reasons will be saved. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1.2 | ColumnhpicfOspfv3SpfReason | read-only | current | The hpicfOspfv3SpfReason refers to the reasons for scheduling an SPF run. The Reasons could be OSPFv3 initialization, adding/deleting interface or link state u… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.11 | TablehpicfOspfv3LogTable | not-accessible | current | A table containing the configuration parameters for OSPFv3 event logging. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1 | RowhpicfOspfv3LogEntry | not-accessible | current | The configuration parameters for OSPFv3 event log entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1.1 | ColumnhpicfOspfv3LogType | not-accessible | current | The type of the event log in OSPFv3 routing protocol . |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1.2 | ColumnhpicfOspfv3LogAction | read-write | current | The mode of OSPFv3 event logging. If the OSPFv3 log type is set to neighborAdjacencyChanges, then meaning of this field is as follows: If enabled, it logs only… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12 | TablehpicfOspfv3RouterLSATable | not-accessible | current | This table represents details advertised in router LSA in addition to area LSDB table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1 | RowhpicfOspfv3RouterLSAEntry | not-accessible | current | A single Area-Scope Link State Advertisement. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.1 | ColumnhpicfOspfv3RouterLSANbrIfId | not-accessible | current | The Interface Id of the neighbor. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.2 | ColumnhpicfOspfv3RouterLSANbrRtrId | not-accessible | current | The Router ID the of the neighbor router. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.3 | ColumnhpicfOspfv3RouterLSAIfType | read-only | current | The kind of interface being described. One of the following: Type Description 1 Point-to-point connection to another router 2 Connection to a transit network 3… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.4 | ColumnhpicfOspfv3RouterLSAMetric | read-only | current | The cost of using this router interface for outbound traffic. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.5 | ColumnhpicfOspfv3RouterLSAIfId | read-only | current | The Interface ID assigned to the interface being described. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.13 | TablehpicfOspfv3NetworkLSATable | not-accessible | current | This table represents details advertised in a Network LSA in addition to area LSDB table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1 | RowhpicfOspfv3NetworkLSAEntry | not-accessible | current | A single Area-Scope Link State Advertisement. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1.1 | ColumnhpicfOspfv3NetworkLSASeqNum | not-accessible | current | The 32-bit LSA sequence number. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1.2 | ColumnhpicfOspfv3NetworkLSAAttachedRouter | read-only | current | The 32-bit Router identifier of the attached Router. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.14 | TablehpicfOspfv3IntraAPLSATable | not-accessible | current | This table represents details advertised in Intra AP LSA in addition to area LSDB table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1 | RowhpicfOspfv3IntraAPLSAEntry | not-accessible | current | A single Area-Scope Link State Advertisement. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.1 | ColumnhpicfOspfv3IntraAPAddrPrefix | not-accessible | current | The advertised 16-byte Address Prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.2 | ColumnhpicfOspfv3IntraAPPrefixLength | not-accessible | current | The Prefix Length of the Address Prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.3 | ColumnhpicfOspfv3IntraAPPrefixOptions | read-only | current | The Prefix Options associated with the Address Prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.4 | ColumnhpicfOspfv3IntraAPMetric | read-only | current | The Cost associated with the Address Prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.15 | TablehpicfOspfv3LinkLSATable | not-accessible | current | This table represents details advertised in link LSA in addition to link LSDB table. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1 | RowhpicfOspfv3LinkLSAEntry | not-accessible | current | A single Link-Scope Link State Advertisement. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.1 | ColumnhpicfOspfv3LinkAddrPrefix | not-accessible | current | The address prefix of link advertised in link LSA. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.2 | ColumnhpicfOspfv3LinkPrefixLength | not-accessible | current | The Prefix Length of the Address Prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.3 | ColumnhpicfOspfv3LinkPrefixOptions | read-only | current | The Prefix Options associated with the Address Prefix. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16 | NodehpicfOspfv3Trap | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.0 | NodehpicfOspfv3Traps | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1 | NodehpicfOspfv3TrapControl | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.16.1.1 | ScalarhpicfOspfv3SetTrap | read-write | current | A four-octet string serving as a bit map for the trap events defined by the OSPFv3 traps. This object is used to enable or disable specific OSPFv3 traps where … |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.17 | TablehpicfOspfv3AreaTable | not-accessible | current | This table describes Ospfv3 area. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1 | RowhpicfOspfv3AreaEntry | not-accessible | current | The object describes Ospfv3 area. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.8 | ColumnhpicfOspfv3AreaNbrDownCount | read-only | current | This object indicates the number of neighbor routers in this area that are in DOWN state. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.9 | ColumnhpicfOspfv3AreaNbrAttemptCount | read-only | current | This object indicates the number of neighbor routers in this area that are in ATTEMPT state. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.10 | ColumnhpicfOspfv3AreaNbrInitCount | read-only | current | This object indicates the number of neighbor routers in this area that are in INIT state. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.11 | ColumnhpicfOspfv3AreaNbr2wayCount | read-only | current | This object indicates the number of neighbor routers in this area that are in TWO WAY state. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.12 | ColumnhpicfOspfv3AreaNbrExstartCount | read-only | current | This object indicates the number of neighbor routers in this area that are in EX-START state. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.13 | ColumnhpicfOspfv3AreaNbrExchangeCount | read-only | current | This object indicates the number of neighbor routers in this area that are in EXCHANGE state. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.14 | ColumnhpicfOspfv3AreaNbrLoadingCount | read-only | current | This object indicates the number of neighbor routers in this area that are in LOADING state. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.15 | ColumnhpicfOspfv3AreaNbrFullCount | read-only | current | This object indicates the number of neighbor routers in this area that are in FULL state. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.16 | ColumnhpicfOspfv3AreaInterfaceCount | read-only | current | This object indicates the total number of OSPFv3 interfaces in this area. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.17 | ColumnhpicfOspfv3AreaScopeUnknownLsaCount | read-only | current | The total number of area-scope unknown link state advertisements in this area's link state database. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.19 | TablehpicfOspfv3AreaAggregateTable | not-accessible | current | HP proprietary extensions to ospfv3AreaAggregateTable |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.19.1 | RowhpicfOspfv3AreaAggregateEntry | not-accessible | current | Each entry is extension of ospfv3AreaAggregateEntry |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.19.1.1 | ColumnhpicfOspfv3AreaAggregateCost | read-create | current | Manually configured cost of the summary advertisement. A value of 0 indicates that the cost calculated by the OSPF standard should be used. Valid costs range f… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.20 | TablehpicfOspfv3AreaLsdbStatsTable | not-accessible | current | Table that contains OSPFv3 area link state database statistics specific information. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1 | RowhpicfOspfv3AreaLsdbStatsEntry | not-accessible | current | A list of statistics counters maintained for an OSPFv3 area link state database. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.1 | ColumnhpicfOspfv3AreaLsdbStatRtrLsaCnt | read-only | current | This object indicates number of router LSA per area. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.2 | ColumnhpicfOspfv3AreaLsdbStatNwLsaCnt | read-only | current | This object indicates number of network LSA per area. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.3 | ColumnhpicfOspfv3AreaLsdbStatInterPreLsaCnt | read-only | current | This object indicates number of inter-area prefix LSA per area. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.4 | ColumnhpicfOspfv3AreaLsdbStatInterRtrLsaCnt | read-only | current | This object indicates number of inter-area router LSA per area. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.5 | ColumnhpicfOspfv3AreaLsdbStatIntraPreLsaCnt | read-only | current | This object indicates number of intra-area prefix LSA per area. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.21 | TablehpicfOspfv3DistributeListTable | not-accessible | current | A table of route prefixes for filtering out intra-area routes that OSPFv3 should not install into local routing table. Any route that is contained by a range i… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.21.1 | RowhpicfOspfv3DistributeListEntry | not-accessible | current | A single entry in the table. Any intra-area route, which is contained within the specified range will not be installed into FIB by OSPFv3. Entries in this tabl… |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.21.1.1 | ColumnhpicfOspfv3DistributeListAddr | not-accessible | current | The IP address of the range of route entries to exclude from installing into FIB by OSPFv3. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.21.1.2 | ColumnhpicfOspfv3DistributeListPrefixLength | not-accessible | current | The mask for the range of route entries to exclude from installing into FIB by OSPFv3. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.21.1.3 | ColumnhpicfOspfv3DistributeListSeqNum | read-only | current | The sequence number of this entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.1.21.1.4 | ColumnhpicfOspfv3DistributeListStatus | read-create | current | The status of this entry. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2 | NodehpicfOspfv3Conformance | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1 | NodehpicfOspfv3Groups | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.1 | GrouphpicfOspfv3BasicGroup | current | These objects are used for managing/monitoring OSPFv3 global parameters. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.2 | GrouphpicfOspfv3AsLsdbGroup | current | These objects are used for OSPFv3 systems that display their AS-scope link state database. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.3 | GrouphpicfOspfv3AreaLsdbGroup | current | These objects are used for OSPFv3 systems that display their Area-scope link state database. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.4 | GrouphpicfOspfv3LinkLsdbGroup | current | These objects are used for OSPFv3 systems that display their Link-scope link state database for non-virtual interfaces. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.8 | GrouphpicfOspfv3LogGroup | current | A collection of objects for configuring the logging of OSPFv3 adjacency related events. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.9 | GrouphpicfOspfv3TrapControlGroup | current | A collection of object which is for controlling the hpicfOspfv3Traps. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.11 | GrouphpicfOspfv3AreaGroup | current | These Area objects used for managing/monitoring OSPFv3 Areas. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.13 | GrouphpicfOspfv3AreaLsdbStatsGroup | current | These lsdb objects used for monitoring OSPFv3 statistics per area. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.14 | GrouphpicfOspfv3NbrGroup1 | current | These neighbor objects are used for managing/monitoring OSPFv3 neighbors. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.15 | GrouphpicfOspfv3StatisticGroup1 | current | A collection of objects that contain OSPF interface and SPF statistics. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.16 | GrouphpicfOspfv3IfGroup1 | current | These interface objects are used for managing/monitoring OSPFv3 interfaces. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.17 | GrouphpicfOspfv3MetricGroup | current | Flags to identify global or manual OSPFv3 cost configuration. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.1.19 | GrouphpicfOspfv3DistributeListGroup | current | A collection of objects for controlling the installation of intra-area routes by OSPFv3. | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.2 | NodehpicfOspfv3Compliances | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.2.1 | CompliancehpicfOspfv3Compliance | deprecated | The compliance statement | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.2.2.2 | CompliancehpicfOspfv3Compliance2 | current | The compliance statement | |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.4 | NodehpicfOspfv3IfMetricObjects | |||
| 1.3.6.1.4.1.11.2.14.11.5.1.44.4.1 | TablehpicfOspfv3IfMetricTable | not-accessible | current | Extensions to the table that contains OSPF Metric specific information. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.4.1.1 | RowhpicfOspfv3IfMetricEntry | not-accessible | current | A list of extensions to the information maintained for an OSPF interface. |
| 1.3.6.1.4.1.11.2.14.11.5.1.44.4.1.1.1 | ColumnhpicfOspfv3IfFlagValue | read-write | current | This flag is defined to know the type of OSPF cost configuration.. -1 : Default configuration. 0 : Manual configuration. 1 : Global configuration (value taken … |