HP-PAGEWIDE-PRO-477DW-MFP-MIB
779 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3 | Nodeorg | |||
| 1.3.6 | Nodedod | |||
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.2 | Nodemgmt | |||
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.2.1.1 | Nodesystem | |||
| 1.3.6.1.2.1.1.1 | ScalarsysDescr | read-only | mandatory | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-syste… |
| 1.3.6.1.2.1.1.2 | ScalarsysObjectID | read-only | mandatory | The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtr… |
| 1.3.6.1.2.1.1.3 | ScalarsysUpTime | read-only | mandatory | The time (in hundredths of a second) since the network management portion of the system was last re-initialized. |
| 1.3.6.1.2.1.1.4 | ScalarsysContact | read-write | mandatory | The textual identification of the contact person for this managed node, together with information on how to contact this person. |
| 1.3.6.1.2.1.1.5 | ScalarsysName | read-write | mandatory | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| 1.3.6.1.2.1.1.6 | ScalarsysLocation | read-write | mandatory | The physical location of this node (e.g., `telephone closet, 3rd floor'). |
| 1.3.6.1.2.1.1.7 | ScalarsysServices | read-only | mandatory | A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each laye… |
| 1.3.6.1.2.1.1.8 | ScalarsysORLastChange | read-only | current | The value of sysUpTime at the time of the most recent change in state or value of any instance of sysORID. |
| 1.3.6.1.2.1.2 | Nodeinterfaces | |||
| 1.3.6.1.2.1.2.1 | ScalarifNumber | read-only | current | The number of network interfaces (regardless of their current state) present on this system. |
| 1.3.6.1.2.1.2.2 | NodeifTable | |||
| 1.3.6.1.2.1.2.2.1 | NodeifEntry | |||
| 1.3.6.1.2.1.2.2.1.1 | ScalarifIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.2.1.2.2.1.2 | ScalarifDescr | read-only | current | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the i… |
| 1.3.6.1.2.1.2.2.1.3 | ScalarifType | read-only | current | The type of interface. Additional values for ifType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifTy… |
| 1.3.6.1.2.1.2.2.1.4 | ScalarifMtu | read-only | current | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram… |
| 1.3.6.1.2.1.2.2.1.5 | ScalarifSpeed | read-only | current | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.2.1.2.2.1.6 | ScalarifPhysAddress | read-only | current | The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-spec… |
| 1.3.6.1.2.1.2.2.1.7 | ScalarifAdminStatus | read-write | current | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces… |
| 1.3.6.1.2.1.2.2.1.8 | ScalarifOperStatus | read-only | current | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If ifAdminStatus is down(2) then ifOp… |
| 1.3.6.1.2.1.2.2.1.9 | ScalarifLastChange | read-only | current | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of… |
| 1.3.6.1.2.1.2.2.1.10 | ScalarifInOctets | read-only | current | The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization… |
| 1.3.6.1.2.1.2.2.1.11 | ScalarifInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Dis… |
| 1.3.6.1.2.1.2.2.1.12 | ScalarifInNUcastPkts | read-only | deprecated | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discont… |
| 1.3.6.1.2.1.2.2.1.13 | ScalarifInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.2.1.2.2.1.14 | ScalarifInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.2.1.2.2.1.15 | ScalarifInUnknownProtos | read-only | current | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For charac… |
| 1.3.6.1.2.1.2.2.1.16 | ScalarifOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initial… |
| 1.3.6.1.2.1.2.2.1.17 | ScalarifOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.2.1.2.2.1.18 | ScalarifOutNUcastPkts | read-only | deprecated | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-laye… |
| 1.3.6.1.2.1.2.2.1.19 | ScalarifOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.2.1.2.2.1.20 | ScalarifOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.2.1.2.2.1.21 | ScalarifOutQLen | read-only | deprecated | The length of the output packet queue (in packets). |
| 1.3.6.1.2.1.2.2.1.22 | ScalarifSpecific | read-only | deprecated | A reference to MIB definitions specific to the particular media being used to realize the interface. It is recommended that this value point to an instance of … |
| 1.3.6.1.2.1.4 | Nodeip | |||
| 1.3.6.1.2.1.4.1 | ScalaripForwarding | read-write | mandatory | The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP g… |
| 1.3.6.1.2.1.4.2 | ScalaripDefaultTTL | read-write | mandatory | The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the tra… |
| 1.3.6.1.2.1.4.3 | ScalaripInReceives | read-only | mandatory | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.2.1.4.4 | ScalaripInHdrErrors | read-only | mandatory | The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live … |
| 1.3.6.1.2.1.4.5 | ScalaripInAddrErrors | read-only | mandatory | The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. Th… |
| 1.3.6.1.2.1.4.6 | ScalaripForwDatagrams | read-only | mandatory | The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the… |
| 1.3.6.1.2.1.4.7 | ScalaripInUnknownProtos | read-only | mandatory | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.2.1.4.8 | ScalaripInDiscards | read-only | mandatory | The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buff… |
| 1.3.6.1.2.1.4.9 | ScalaripInDelivers | read-only | mandatory | The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). |
| 1.3.6.1.2.1.4.10 | ScalaripOutRequests | read-only | mandatory | The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not in… |
| 1.3.6.1.2.1.4.11 | ScalaripOutDiscards | read-only | mandatory | The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for … |
| 1.3.6.1.2.1.4.12 | ScalaripOutNoRoutes | read-only | mandatory | The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted… |
| 1.3.6.1.2.1.4.13 | ScalaripReasmTimeout | read-only | mandatory | The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity. |
| 1.3.6.1.2.1.4.14 | ScalaripReasmReqds | read-only | mandatory | The number of IP fragments received which needed to be reassembled at this entity. |
| 1.3.6.1.2.1.4.15 | ScalaripReasmOKs | read-only | mandatory | The number of IP datagrams successfully re- assembled. |
| 1.3.6.1.2.1.4.16 | ScalaripReasmFails | read-only | mandatory | The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of di… |
| 1.3.6.1.2.1.4.17 | ScalaripFragOKs | read-only | mandatory | The number of IP datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.2.1.4.18 | ScalaripFragFails | read-only | mandatory | The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment fl… |
| 1.3.6.1.2.1.4.19 | ScalaripFragCreates | read-only | mandatory | The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. |
| 1.3.6.1.2.1.4.20 | NodeipAddrTable | |||
| 1.3.6.1.2.1.4.20.1 | NodeipAddrEntry | |||
| 1.3.6.1.2.1.4.20.1.1 | ScalaripAdEntAddr | read-only | mandatory | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.2.1.4.20.1.2 | ScalaripAdEntIfIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.2.1.4.20.1.3 | ScalaripAdEntNetMask | read-only | mandatory | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.2.1.4.20.1.4 | ScalaripAdEntBcastAddr | read-only | mandatory | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.2.1.4.21 | NodeipRouteTable | |||
| 1.3.6.1.2.1.4.21.1 | NodeipRouteEntry | |||
| 1.3.6.1.2.1.4.21.1.1 | ScalaripRouteDest | read-write | mandatory | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.2.1.4.21.1.2 | ScalaripRouteIfIndex | read-write | mandatory | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.2.1.4.21.1.3 | ScalaripRouteMetric1 | read-write | mandatory | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If … |
| 1.3.6.1.2.1.4.21.1.7 | ScalaripRouteNextHop | read-write | mandatory | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.2.1.4.21.1.8 | ScalaripRouteType | read-write | mandatory | The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this objec… |
| 1.3.6.1.2.1.4.21.1.9 | ScalaripRouteProto | read-only | mandatory | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.2.1.4.21.1.11 | ScalaripRouteMask | read-write | mandatory | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not s… |
| 1.3.6.1.2.1.4.21.1.13 | ScalaripRouteInfo | read-only | mandatory | A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the rou… |
| 1.3.6.1.2.1.4.22 | NodeipNetToMediaTable | |||
| 1.3.6.1.2.1.4.22.1 | NodeipNetToMediaEntry | |||
| 1.3.6.1.2.1.4.22.1.1 | ScalaripNetToMediaIfIndex | read-write | mandatory | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.2.1.4.22.1.2 | ScalaripNetToMediaPhysAddress | read-write | mandatory | The media-dependent `physical' address. |
| 1.3.6.1.2.1.4.22.1.3 | ScalaripNetToMediaNetAddress | read-write | mandatory | The IpAddress corresponding to the media- dependent `physical' address. |
| 1.3.6.1.2.1.4.22.1.4 | ScalaripNetToMediaType | read-write | mandatory | The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipNetToMediaTable. That is, it e… |
| 1.3.6.1.2.1.4.23 | ScalaripRoutingDiscards | read-only | mandatory | The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-u… |
| 1.3.6.1.2.1.11 | Nodesnmp | |||
| 1.3.6.1.2.1.11.1 | ScalarsnmpInPkts | read-only | mandatory | The total number of Messages delivered to the SNMP entity from the transport service. |
| 1.3.6.1.2.1.11.2 | ScalarsnmpOutPkts | read-only | mandatory | The total number of SNMP Messages which were passed from the SNMP protocol entity to the transport service. |
| 1.3.6.1.2.1.11.3 | ScalarsnmpInBadVersions | read-only | mandatory | The total number of SNMP Messages which were delivered to the SNMP protocol entity and were for an unsupported SNMP version. |
| 1.3.6.1.2.1.11.4 | ScalarsnmpInBadCommunityNames | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which used a SNMP community name not known to said entity. |
| 1.3.6.1.2.1.11.5 | ScalarsnmpInBadCommunityUses | read-only | mandatory | The total number of SNMP Messages delivered to the SNMP protocol entity which represented an SNMP operation which was not allowed by the SNMP community named i… |
| 1.3.6.1.2.1.11.6 | ScalarsnmpInASNParseErrs | read-only | mandatory | The total number of ASN.1 or BER errors encountered by the SNMP protocol entity when decoding received SNMP Messages. |
| 1.3.6.1.2.1.11.8 | ScalarsnmpInTooBigs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `tooBig'. |
| 1.3.6.1.2.1.11.9 | ScalarsnmpInNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `noSuchName'. |
| 1.3.6.1.2.1.11.10 | ScalarsnmpInBadValues | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.2.1.11.11 | ScalarsnmpInReadOnlys | read-only | mandatory | The total number valid SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `readOnly'. It should be… |
| 1.3.6.1.2.1.11.12 | ScalarsnmpInGenErrs | read-only | mandatory | The total number of SNMP PDUs which were delivered to the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.2.1.11.13 | ScalarsnmpInTotalReqVars | read-only | mandatory | The total number of MIB objects which have been retrieved successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and Get-Ne… |
| 1.3.6.1.2.1.11.14 | ScalarsnmpInTotalSetVars | read-only | mandatory | The total number of MIB objects which have been altered successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request PDUs. |
| 1.3.6.1.2.1.11.15 | ScalarsnmpInGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.16 | ScalarsnmpInGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.17 | ScalarsnmpInSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.18 | ScalarsnmpInGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.19 | ScalarsnmpInTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been accepted and processed by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.20 | ScalarsnmpOutTooBigs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `tooBig.' |
| 1.3.6.1.2.1.11.21 | ScalarsnmpOutNoSuchNames | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status is `noSuchName'. |
| 1.3.6.1.2.1.11.22 | ScalarsnmpOutBadValues | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `badValue'. |
| 1.3.6.1.2.1.11.24 | ScalarsnmpOutGenErrs | read-only | mandatory | The total number of SNMP PDUs which were generated by the SNMP protocol entity and for which the value of the error-status field is `genErr'. |
| 1.3.6.1.2.1.11.25 | ScalarsnmpOutGetRequests | read-only | mandatory | The total number of SNMP Get-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.26 | ScalarsnmpOutGetNexts | read-only | mandatory | The total number of SNMP Get-Next PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.27 | ScalarsnmpOutSetRequests | read-only | mandatory | The total number of SNMP Set-Request PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.28 | ScalarsnmpOutGetResponses | read-only | mandatory | The total number of SNMP Get-Response PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.29 | ScalarsnmpOutTraps | read-only | mandatory | The total number of SNMP Trap PDUs which have been generated by the SNMP protocol entity. |
| 1.3.6.1.2.1.11.30 | ScalarsnmpEnableAuthenTraps | read-write | mandatory | Indicates whether the SNMP agent process is permitted to generate authentication-failure traps. The value of this object overrides any configuration informatio… |
| 1.3.6.1.2.1.11.31 | ScalarsnmpSilentDrops | read-only | current | The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered… |
| 1.3.6.1.2.1.11.32 | ScalarsnmpProxyDrops | read-only | current | The total number of Confirmed Class PDUs (such as GetRequest-PDUs, GetNextRequest-PDUs, GetBulkRequest-PDUs, SetRequest-PDUs, and InformRequest-PDUs) delivered… |
| 1.3.6.1.2.1.25 | Nodehost | |||
| 1.3.6.1.2.1.25.1 | NodehrSystem | |||
| 1.3.6.1.2.1.25.1.1 | ScalarhrSystemUptime | read-only | current | The amount of time since this host was last initialized. Note that this is different from sysUpTime in the SNMPv2-MIB [RFC1907] because sysUpTime is the uptime… |
| 1.3.6.1.2.1.25.1.2 | ScalarhrSystemDate | read-write | current | The host's notion of the local date and time of day. |
| 1.3.6.1.2.1.25.1.3 | ScalarhrSystemInitialLoadDevice | read-write | current | The index of the hrDeviceEntry for the device from which this host is configured to load its initial operating system configuration (i.e., which operating syst… |
| 1.3.6.1.2.1.25.1.4 | ScalarhrSystemInitialLoadParameters | read-write | current | This object contains the parameters (e.g. a pathname and parameter) supplied to the load device when requesting the initial operating system configuration from… |
| 1.3.6.1.2.1.25.1.5 | ScalarhrSystemNumUsers | read-only | current | The number of user sessions for which this host is storing state information. A session is a collection of processes requiring a single act of user authenticat… |
| 1.3.6.1.2.1.25.1.6 | ScalarhrSystemProcesses | read-only | current | The number of process contexts currently loaded or running on this system. |
| 1.3.6.1.2.1.25.1.7 | ScalarhrSystemMaxProcesses | read-only | current | The maximum number of process contexts this system can support. If there is no fixed maximum, the value should be zero. On systems that have a fixed maximum, t… |
| 1.3.6.1.2.1.25.2 | NodehrStorage | |||
| 1.3.6.1.2.1.25.2.2 | ScalarhrMemorySize | read-only | current | The amount of physical read-write main memory, typically RAM, contained by the host. |
| 1.3.6.1.2.1.25.2.3 | NodehrStorageTable | |||
| 1.3.6.1.2.1.25.2.3.1 | NodehrStorageEntry | |||
| 1.3.6.1.2.1.25.2.3.1.1 | ScalarhrStorageIndex | read-only | current | A unique value for each logical storage area contained by the host. |
| 1.3.6.1.2.1.25.2.3.1.2 | ScalarhrStorageType | read-only | current | The type of storage represented by this entry. |
| 1.3.6.1.2.1.25.2.3.1.3 | ScalarhrStorageDescr | read-only | current | A description of the type and instance of the storage described by this entry. |
| 1.3.6.1.2.1.25.2.3.1.4 | ScalarhrStorageAllocationUnits | read-only | current | The size, in bytes, of the data objects allocated from this pool. If this entry is monitoring sectors, blocks, buffers, or packets, for example, this number wi… |
| 1.3.6.1.2.1.25.2.3.1.5 | ScalarhrStorageSize | read-write | current | The size of the storage represented by this entry, in units of hrStorageAllocationUnits. This object is writable to allow remote configuration of the size of t… |
| 1.3.6.1.2.1.25.2.3.1.6 | ScalarhrStorageUsed | read-only | current | The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits. |
| 1.3.6.1.2.1.25.3 | NodehrDevice | |||
| 1.3.6.1.2.1.25.3.2 | NodehrDeviceTable | |||
| 1.3.6.1.2.1.25.3.2.1 | NodehrDeviceEntry | |||
| 1.3.6.1.2.1.25.3.2.1.1 | ScalarhrDeviceIndex | read-only | current | A unique value for each device contained by the host. The value for each device must remain constant at least from one re-initialization of the agent to the ne… |
| 1.3.6.1.2.1.25.3.2.1.2 | ScalarhrDeviceType | read-only | current | An indication of the type of device. If this value is `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry exists in the hrProcessorTable which corresponds to… |
| 1.3.6.1.2.1.25.3.2.1.3 | ScalarhrDeviceDescr | read-only | current | A textual description of this device, including the device's manufacturer and revision, and optionally, its serial number. |
| 1.3.6.1.2.1.25.3.2.1.4 | ScalarhrDeviceID | read-only | current | The product ID for this device. |
| 1.3.6.1.2.1.25.3.2.1.5 | ScalarhrDeviceStatus | read-only | current | The current operational state of the device described by this row of the table. A value unknown(1) indicates that the current state of the device is unknown. r… |
| 1.3.6.1.2.1.25.3.2.1.6 | ScalarhrDeviceErrors | read-only | current | The number of errors detected on this device. It should be noted that as this object has a SYNTAX of Counter32, that it does not have a defined initial value. … |
| 1.3.6.1.2.1.25.3.5 | NodehrPrinterTable | |||
| 1.3.6.1.2.1.25.3.5.1 | NodehrPrinterEntry | |||
| 1.3.6.1.2.1.25.3.5.1.1 | ScalarhrPrinterStatus | read-only | current | The current status of this printer device. |
| 1.3.6.1.2.1.25.3.5.1.2 | ScalarhrPrinterDetectedErrorState | read-only | current | This object represents any error conditions detected by the printer. The error conditions are encoded as bits in an octet string, with the following definition… |
| 1.3.6.1.2.1.31 | NodeifMIB | |||
| 1.3.6.1.2.1.31.1 | NodeifMIBObjects | |||
| 1.3.6.1.2.1.31.1.5 | ScalarifTableLastChange | read-only | current | The value of sysUpTime at the time of the last creation or deletion of an entry in the ifTable. If the number of entries has been unchanged since the last re-i… |
| 1.3.6.1.2.1.43 | Nodeprintmib | |||
| 1.3.6.1.2.1.43.5 | NodeprtGeneral | |||
| 1.3.6.1.2.1.43.5.1 | NodeprtGeneralTable | |||
| 1.3.6.1.2.1.43.5.1.1 | NodeprtGeneralEntry | |||
| 1.3.6.1.2.1.43.5.1.1.1 | ScalarprtGeneralConfigChanges | read-only | current | Counts configuration changes within the printer. A configuration change is defined to be an action that results in a change to any MIB object other than those … |
| 1.3.6.1.2.1.43.5.1.1.2 | ScalarprtGeneralCurrentLocalization | read-write | current | The value of the prtLocalizationIndex corresponding to the current language, country, and character set to be used for localized string values that are identif… |
| 1.3.6.1.2.1.43.5.1.1.3 | ScalarprtGeneralReset | read-write | current | Setting this value to 'powerCycleReset', 'resetToNVRAM', or 'resetToFactoryDefaults' will result in the resetting of the printer. When read, this object will a… |
| 1.3.6.1.2.1.43.5.1.1.4 | ScalarprtGeneralCurrentOperator | read-write | current | The name of the person who is responsible for operating this printer. It is suggested that this string include information that would enable other humans to re… |
| 1.3.6.1.2.1.43.5.1.1.5 | ScalarprtGeneralServicePerson | read-write | current | The name of the person responsible for servicing this printer. It is suggested that this string include information that would enable other humans to reach the… |
| 1.3.6.1.2.1.43.5.1.1.6 | ScalarprtInputDefaultIndex | read-write | current | The value of prtInputIndex corresponding to the default input sub-unit: that is, this object selects the default source of input media. |
| 1.3.6.1.2.1.43.5.1.1.7 | ScalarprtOutputDefaultIndex | read-write | current | The value of prtOutputIndex corresponding to the default output sub-unit; that is, this object selects the default output destination. |
| 1.3.6.1.2.1.43.5.1.1.8 | ScalarprtMarkerDefaultIndex | read-write | current | The value of prtMarkerIndex corresponding to the default marker sub-unit; that is, this object selects the default marker. |
| 1.3.6.1.2.1.43.5.1.1.9 | ScalarprtMediaPathDefaultIndex | read-write | current | The value of prtMediaPathIndex corresponding to the default media path; that is, the selection of the default media path. |
| 1.3.6.1.2.1.43.5.1.1.10 | ScalarprtConsoleLocalization | read-write | current | The value of the prtLocalizationIndex corresponding to the language, country, and character set to be used for the console. This localization applies both to t… |
| 1.3.6.1.2.1.43.5.1.1.11 | ScalarprtConsoleNumberOfDisplayLines | read-only | current | The number of lines on the printer's physical display. This value is 0 if there are no lines on the physical display or if there is no physical display |
| 1.3.6.1.2.1.43.5.1.1.16 | ScalarprtGeneralPrinterName | read-write | current | An administrator-specified name for this printer. Depending upon implementation of this printer, the value of this object may or may not be same as the value f… |
| 1.3.6.1.2.1.43.5.1.1.17 | ScalarprtGeneralSerialNumber | read-write | current | A recorded serial number for this device that indexes some type device catalog or inventory. This value is usually set by the device manufacturer but the MIB s… |
| 1.3.6.1.2.1.43.6 | NodeprtCover | |||
| 1.3.6.1.2.1.43.6.1 | NodeprtCoverTable | |||
| 1.3.6.1.2.1.43.6.1.1 | NodeprtCoverEntry | |||
| 1.3.6.1.2.1.43.6.1.1.2 | ScalarprtCoverDescription | read-only | current | The manufacturer provided cover sub-mechanism name in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.2.1.43.6.1.1.3 | ScalarprtCoverStatus | read-only | current | The status of this cover sub-unit. |
| 1.3.6.1.2.1.43.7 | NodeprtLocalization | |||
| 1.3.6.1.2.1.43.7.1 | NodeprtLocalizationTable | |||
| 1.3.6.1.2.1.43.7.1.1 | NodeprtLocalizationEntry | |||
| 1.3.6.1.2.1.43.7.1.1.2 | ScalarprtLocalizationLanguage | read-only | current | A two character language code from ISO 639. Examples en, es, fr, de. NOTE: These examples were shown as upper case in RFC 1759 and are now shown as lower case … |
| 1.3.6.1.2.1.43.7.1.1.3 | ScalarprtLocalizationCountry | read-only | current | A two character country code from ISO 3166, a blank string (two space characters) shall indicate that the country is not defined. Examples: US, GB, FR, DE, ... |
| 1.3.6.1.2.1.43.7.1.1.4 | ScalarprtLocalizationCharacterSet | read-only | current | The coded character set used for this localization. |
| 1.3.6.1.2.1.43.8 | NodeprtInput | |||
| 1.3.6.1.2.1.43.8.2 | NodeprtInputTable | |||
| 1.3.6.1.2.1.43.8.2.1 | NodeprtInputEntry | |||
| 1.3.6.1.2.1.43.8.2.1.2 | ScalarprtInputType | read-only | current | The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Input Class provides for a descri… |
| 1.3.6.1.2.1.43.8.2.1.3 | ScalarprtInputDimUnit | read-only | current | The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.4 | ScalarprtInputMediaDimFeedDirDeclared | read-write | current | This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. Th… |
| 1.3.6.1.2.1.43.8.2.1.5 | ScalarprtInputMediaDimXFeedDirDeclared | read-write | current | This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or will be) in this input sub-un… |
| 1.3.6.1.2.1.43.8.2.1.6 | ScalarprtInputMediaDimFeedDirChosen | read-only | current | The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this value will be used even if the… |
| 1.3.6.1.2.1.43.8.2.1.7 | ScalarprtInputMediaDimXFeedDirChosen | read-only | current | The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even … |
| 1.3.6.1.2.1.43.8.2.1.8 | ScalarprtInputCapacityUnit | read-only | current | The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.9 | ScalarprtInputMaxCapacity | read-write | current | The maximum capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so thi… |
| 1.3.6.1.2.1.43.8.2.1.10 | ScalarprtInputCurrentLevel | read-write | current | The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can reliably sense this value, the valu… |
| 1.3.6.1.2.1.43.8.2.1.11 | ScalarprtInputStatus | read-only | current | The current status of this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.12 | ScalarprtInputMediaName | read-write | current | A description of the media contained in this input sub-unit; This description is to be used by a client to format and Localize a string for display to a human … |
| 1.3.6.1.2.1.43.8.2.1.13 | ScalarprtInputName | read-write | current | The name assigned to this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.14 | ScalarprtInputVendorName | read-only | current | The vendor name of this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.15 | ScalarprtInputModel | read-only | current | The model name of this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.16 | ScalarprtInputVersion | read-only | current | The version of this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.17 | ScalarprtInputSerialNumber | read-only | current | The serial number assigned to this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.18 | ScalarprtInputDescription | read-only | current | A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.2.1.43.8.2.1.19 | ScalarprtInputSecurity | read-write | current | Indicates if this input sub-unit has some security associated with it. |
| 1.3.6.1.2.1.43.8.2.1.20 | ScalarprtInputMediaWeight | read-write | current | The weight of the medium associated with this input sub-unit in grams / per meter squared. The value (-2) means unknown. |
| 1.3.6.1.2.1.43.8.2.1.21 | ScalarprtInputMediaType | read-write | current | The name of the type of medium associated with this input sub unit. This name need not be processed by the printer; it might simply be displayed to an operator… |
| 1.3.6.1.2.1.43.8.2.1.22 | ScalarprtInputMediaColor | read-write | current | The name of the color of the medium associated with this input sub-unit using standardized string values. NOTE: The above description has been modified from RF… |
| 1.3.6.1.2.1.43.8.2.1.23 | ScalarprtInputMediaFormParts | read-write | current | The number of parts associated with the medium associated with this input sub-unit if the medium is a multi-part form. The value (-1) means other and specifica… |
| 1.3.6.1.2.1.43.8.2.1.24 | ScalarprtInputMediaLoadTimeout | read-write | current | When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer will wait for the duration (in s… |
| 1.3.6.1.2.1.43.9 | NodeprtOutput | |||
| 1.3.6.1.2.1.43.9.2 | NodeprtOutputTable | |||
| 1.3.6.1.2.1.43.9.2.1 | NodeprtOutputEntry | |||
| 1.3.6.1.2.1.43.9.2.1.2 | ScalarprtOutputType | read-only | current | The type of technology supported by this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.3 | ScalarprtOutputCapacityUnit | read-only | current | The unit of measurement for use in calculating and relaying capacity values for this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.4 | ScalarprtOutputMaxCapacity | read-write | current | The maximum capacity of this output sub-unit in output sub- unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so… |
| 1.3.6.1.2.1.43.9.2.1.5 | ScalarprtOutputRemainingCapacity | read-write | current | The remaining capacity of the possible output sub-unit capacity in output sub-unit capacity units (PrtCapacityUnitTC)of this output sub-unit. If this output su… |
| 1.3.6.1.2.1.43.9.2.1.6 | ScalarprtOutputStatus | read-only | current | The current status of this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.7 | ScalarprtOutputName | read-write | current | The name assigned to this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.8 | ScalarprtOutputVendorName | read-only | current | The vendor name of this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.9 | ScalarprtOutputModel | read-only | current | The model name assigned to this output sub-unit. NOTE: The above description has been modified from RFC 1759 for clarification. |
| 1.3.6.1.2.1.43.9.2.1.10 | ScalarprtOutputVersion | read-only | current | The version of this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.11 | ScalarprtOutputSerialNumber | read-only | current | The serial number assigned to this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.12 | ScalarprtOutputDescription | read-only | current | A free-form text description of this output sub-unit in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.2.1.43.9.2.1.13 | ScalarprtOutputSecurity | read-write | current | Indicates if this output sub-unit has some security associated with it and if that security is enabled or not. |
| 1.3.6.1.2.1.43.9.2.1.14 | ScalarprtOutputDimUnit | read-only | current | The unit of measurement for use in calculating and relaying dimensional values for this output sub-unit. |
| 1.3.6.1.2.1.43.9.2.1.15 | ScalarprtOutputMaxDimFeedDir | read-write | current | The maximum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output… |
| 1.3.6.1.2.1.43.9.2.1.16 | ScalarprtOutputMaxDimXFeedDir | read-write | current | The maximum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in … |
| 1.3.6.1.2.1.43.9.2.1.17 | ScalarprtOutputMinDimFeedDir | read-write | current | The minimum dimensions supported by this output sub-unit for measurements taken parallel relative to the feed direction associated with that sub-unit in output… |
| 1.3.6.1.2.1.43.9.2.1.18 | ScalarprtOutputMinDimXFeedDir | read-write | current | The minimum dimensions supported by this output sub-unit for measurements taken ninety degrees relative to the feed direction associated with that sub-unit in … |
| 1.3.6.1.2.1.43.9.2.1.19 | ScalarprtOutputStackingOrder | read-write | current | The current state of the stacking order for the associated output sub-unit. 'FirstToLast' means that as pages are output the front of the next page is placed a… |
| 1.3.6.1.2.1.43.9.2.1.20 | ScalarprtOutputPageDeliveryOrientation | read-write | current | The reading surface that will be 'up' when pages are delivered to the associated output sub-unit. Values are faceUp and faceDown. (Note: interpretation of thes… |
| 1.3.6.1.2.1.43.9.2.1.21 | ScalarprtOutputBursting | read-write | current | This object indicates that the outputting sub-unit supports bursting, and if so, whether the feature is enabled. Bursting is the process by which continuous me… |
| 1.3.6.1.2.1.43.9.2.1.22 | ScalarprtOutputDecollating | read-write | current | This object indicates that the output supports decollating, and if so, whether the feature is enabled. Decollating is the process by which the individual parts… |
| 1.3.6.1.2.1.43.9.2.1.23 | ScalarprtOutputPageCollated | read-write | current | This object indicates that the output sub-unit supports page collation, and if so, whether the feature is enabled. See RFC 3805 Appendix A, Glossary Of Terms, … |
| 1.3.6.1.2.1.43.9.2.1.24 | ScalarprtOutputOffsetStacking | read-write | current | This object indicates that the output supports offset stacking,and if so, whether the feature is enabled. See RFC 3805 Appendix A, Glossary Of Terms, for how O… |
| 1.3.6.1.2.1.43.10 | NodeprtMarker | |||
| 1.3.6.1.2.1.43.10.2 | NodeprtMarkerTable | |||
| 1.3.6.1.2.1.43.10.2.1 | NodeprtMarkerEntry | |||
| 1.3.6.1.2.1.43.10.2.1.2 | ScalarprtMarkerMarkTech | read-only | current | The type of marking technology used for this marking sub-unit. |
| 1.3.6.1.2.1.43.10.2.1.3 | ScalarprtMarkerCounterUnit | read-only | current | The unit that will be used by the printer when reporting counter values for this marking sub-unit. The time units of measure are provided for a device like a s… |
| 1.3.6.1.2.1.43.10.2.1.4 | ScalarprtMarkerLifeCount | read-only | current | The count of the number of units of measure counted during the life of printer using units of measure as specified by prtMarkerCounterUnit. Note: This object s… |
| 1.3.6.1.2.1.43.10.2.1.5 | ScalarprtMarkerPowerOnCount | read-only | current | The count of the number of units of measure counted since the equipment was most recently powered on using units of measure as specified by prtMarkerCounterUni… |
| 1.3.6.1.2.1.43.10.2.1.6 | ScalarprtMarkerProcessColorants | read-only | current | The number of process colors supported by this marker. A process color of 1 implies monochrome. The value of this object and prtMarkerSpotColorants cannot both… |
| 1.3.6.1.2.1.43.10.2.1.7 | ScalarprtMarkerSpotColorants | read-only | current | The number of spot colors supported by this marker. The value of this object and prtMarkerProcessColorants cannot both be 0. Must be 0 or greater. NOTE: The ab… |
| 1.3.6.1.2.1.43.10.2.1.8 | ScalarprtMarkerAddressabilityUnit | read-only | current | The unit of measure of distances, as applied to the marker's resolution. NOTE: The above description has been modified from RFC 1759 for clarification. |
| 1.3.6.1.2.1.43.10.2.1.9 | ScalarprtMarkerAddressabilityFeedDir | read-only | current | The maximum number of addressable marking positions in the feed direction per 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of (-1) … |
| 1.3.6.1.2.1.43.10.2.1.10 | ScalarprtMarkerAddressabilityXFeedDir | read-only | current | The maximum number of addressable marking positions in the cross feed direction in 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of … |
| 1.3.6.1.2.1.43.10.2.1.11 | ScalarprtMarkerNorthMargin | read-only | current | The margin, in units identified by prtMarkerAddressabilityUnit, from the leading edge of the medium as the medium flows through the marking engine with the sid… |
| 1.3.6.1.2.1.43.10.2.1.12 | ScalarprtMarkerSouthMargin | read-only | current | The margin from the South edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by… |
| 1.3.6.1.2.1.43.10.2.1.13 | ScalarprtMarkerWestMargin | read-only | current | The margin from the West edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by … |
| 1.3.6.1.2.1.43.10.2.1.14 | ScalarprtMarkerEastMargin | read-only | current | The margin from the East edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by … |
| 1.3.6.1.2.1.43.10.2.1.15 | ScalarprtMarkerStatus | read-only | current | The current status of this marker sub-unit. |
| 1.3.6.1.2.1.43.11 | NodeprtMarkerSupplies | |||
| 1.3.6.1.2.1.43.11.1 | NodeprtMarkerSuppliesTable | |||
| 1.3.6.1.2.1.43.11.1.1 | NodeprtMarkerSuppliesEntry | |||
| 1.3.6.1.2.1.43.11.1.1.2 | ScalarprtMarkerSuppliesMarkerIndex | read-only | current | The value of prtMarkerIndex corresponding to the marking sub unit with which this marker supply sub-unit is associated. |
| 1.3.6.1.2.1.43.11.1.1.3 | ScalarprtMarkerSuppliesColorantIndex | read-only | current | The value of prtMarkerColorantIndex corresponding to the colorant with which this marker supply sub-unit is associated. This value shall be 0 if there is no co… |
| 1.3.6.1.2.1.43.11.1.1.4 | ScalarprtMarkerSuppliesClass | read-only | current | Indicates whether this supply entity represents a supply that is consumed or a receptacle that is filled. NOTE: The above description has been modified from RF… |
| 1.3.6.1.2.1.43.11.1.1.5 | ScalarprtMarkerSuppliesType | read-only | current | The type of this supply. |
| 1.3.6.1.2.1.43.11.1.1.6 | ScalarprtMarkerSuppliesDescription | read-only | current | The description of this supply container/receptacle in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.2.1.43.11.1.1.7 | ScalarprtMarkerSuppliesSupplyUnit | read-only | current | Unit of measure of this marker supply container/receptacle. NOTE: The above description has been modified from RFC 1759 for clarification. |
| 1.3.6.1.2.1.43.11.1.1.8 | ScalarprtMarkerSuppliesMaxCapacity | read-write | current | The maximum capacity of this supply container/receptacle expressed in prtMarkerSuppliesSupplyUnit. If this supply container/receptacle can reliably sense this … |
| 1.3.6.1.2.1.43.11.1.1.9 | ScalarprtMarkerSuppliesLevel | read-write | current | The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense thi… |
| 1.3.6.1.2.1.43.12 | NodeprtMarkerColorant | |||
| 1.3.6.1.2.1.43.12.1 | NodeprtMarkerColorantTable | |||
| 1.3.6.1.2.1.43.12.1.1 | NodeprtMarkerColorantEntry | |||
| 1.3.6.1.2.1.43.12.1.1.2 | ScalarprtMarkerColorantMarkerIndex | read-only | current | The value of prtMarkerIndex corresponding to the marker sub unit with which this colorant entry is associated. |
| 1.3.6.1.2.1.43.12.1.1.3 | ScalarprtMarkerColorantRole | read-only | current | The role played by this colorant. |
| 1.3.6.1.2.1.43.12.1.1.4 | ScalarprtMarkerColorantValue | read-only | current | The name of the color of this colorant using standardized string names from ISO 10175 (DPA) and ISO 10180 (SPDL) such as: other unknown white red green blue cy… |
| 1.3.6.1.2.1.43.12.1.1.5 | ScalarprtMarkerColorantTonality | read-only | current | The distinct levels of tonality realizable by a marking sub unit when using this colorant. This value does not include the number of levels of tonal difference… |
| 1.3.6.1.2.1.43.13 | NodeprtMediaPath | |||
| 1.3.6.1.2.1.43.13.4 | NodeprtMediaPathTable | |||
| 1.3.6.1.2.1.43.13.4.1 | NodeprtMediaPathEntry | |||
| 1.3.6.1.2.1.43.13.4.1.2 | ScalarprtMediaPathMaxSpeedPrintUnit | read-only | current | The unit of measure used in specifying the speed of all media paths in the printer. |
| 1.3.6.1.2.1.43.13.4.1.3 | ScalarprtMediaPathMediaSizeUnit | read-only | current | The units of measure of media size for use in calculating and relaying dimensional values for all media paths in the printer. |
| 1.3.6.1.2.1.43.13.4.1.4 | ScalarprtMediaPathMaxSpeed | read-only | current | The maximum printing speed of this media path expressed in prtMediaPathMaxSpeedUnit's. A value of (-1) implies 'other'. |
| 1.3.6.1.2.1.43.13.4.1.5 | ScalarprtMediaPathMaxMediaFeedDir | read-only | current | The maximum physical media size in the feed direction of this media path expressed in units of measure specified by PrtMediaPathMediaSizeUnit. A value of (-1) … |
| 1.3.6.1.2.1.43.13.4.1.6 | ScalarprtMediaPathMaxMediaXFeedDir | read-only | current | The maximum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (… |
| 1.3.6.1.2.1.43.13.4.1.7 | ScalarprtMediaPathMinMediaFeedDir | read-only | current | The minimum physical media size in the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (-2) … |
| 1.3.6.1.2.1.43.13.4.1.8 | ScalarprtMediaPathMinMediaXFeedDir | read-only | current | The minimum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (… |
| 1.3.6.1.2.1.43.13.4.1.9 | ScalarprtMediaPathType | read-only | current | The type of the media path for this media path. |
| 1.3.6.1.2.1.43.13.4.1.10 | ScalarprtMediaPathDescription | read-only | current | The manufacturer-provided description of this media path in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.2.1.43.13.4.1.11 | ScalarprtMediaPathStatus | read-only | current | The current status of this media path. |
| 1.3.6.1.2.1.43.14 | NodeprtChannel | |||
| 1.3.6.1.2.1.43.14.1 | NodeprtChannelTable | |||
| 1.3.6.1.2.1.43.14.1.1 | NodeprtChannelEntry | |||
| 1.3.6.1.2.1.43.14.1.1.2 | ScalarprtChannelType | read-only | current | The type of this print data channel. This object provides the linkage to ChannelType-specific groups that may (conceptually) extend the prtChannelTable with ad… |
| 1.3.6.1.2.1.43.14.1.1.3 | ScalarprtChannelProtocolVersion | read-only | current | The version of the protocol used on this channel. The format used for version numbering depends on prtChannelType. |
| 1.3.6.1.2.1.43.14.1.1.4 | ScalarprtChannelCurrentJobCntlLangIndex | read-write | current | The value of prtInterpreterIndex corresponding to the Control Language Interpreter for this channel. This interpreter defines the syntax used for control funct… |
| 1.3.6.1.2.1.43.14.1.1.5 | ScalarprtChannelDefaultPageDescLangIndex | read-write | current | The value of prtInterpreterIndex corresponding to the Page Description Language Interpreter for this channel. This interpreter defines the default Page Descrip… |
| 1.3.6.1.2.1.43.14.1.1.6 | ScalarprtChannelState | read-write | current | The state of this print data channel. The value determines whether control information and print data is allowed through this channel or not. |
| 1.3.6.1.2.1.43.14.1.1.7 | ScalarprtChannelIfIndex | read-write | current | The value of ifIndex in the ifTable; see the Interfaces Group MIB [RFC2863] which corresponds to this channel. When more than one row of the ifTable is relevan… |
| 1.3.6.1.2.1.43.14.1.1.8 | ScalarprtChannelStatus | read-only | current | The current status of the channel. |
| 1.3.6.1.2.1.43.14.1.1.9 | ScalarprtChannelInformation | read-only | current | Auxiliary information to allow a printing application to use the channel for data submission to the printer. An application capable of using a specific PrtChan… |
| 1.3.6.1.2.1.43.15 | NodeprtInterpreter | |||
| 1.3.6.1.2.1.43.15.1 | NodeprtInterpreterTable | |||
| 1.3.6.1.2.1.43.15.1.1 | NodeprtInterpreterEntry | |||
| 1.3.6.1.2.1.43.15.1.1.2 | ScalarprtInterpreterLangFamily | read-only | current | The family name of a Page Description Language (PDL) or control language which this interpreter in the printer can interpret or emulate. NOTE: The above descri… |
| 1.3.6.1.2.1.43.15.1.1.3 | ScalarprtInterpreterLangLevel | read-only | current | The level of the language which this interpreter is interpreting or emulating. This might contain a value like '5e'for an interpreter which is emulating level … |
| 1.3.6.1.2.1.43.15.1.1.4 | ScalarprtInterpreterLangVersion | read-only | current | The date code or version of the language which this interpreter is interpreting or emulating. |
| 1.3.6.1.2.1.43.15.1.1.5 | ScalarprtInterpreterDescription | read-only | current | A string to identify this interpreter in the localization specified by prtGeneralCurrentLocalization as opposed to the language which is being interpreted. It … |
| 1.3.6.1.2.1.43.15.1.1.6 | ScalarprtInterpreterVersion | read-only | current | The date code, version number, or other product specific information tied to this interpreter. This value is associated with the interpreter, rather than with … |
| 1.3.6.1.2.1.43.15.1.1.7 | ScalarprtInterpreterDefaultOrientation | read-write | current | The current orientation default for this interpreter. This value may be overridden for a particular job (e.g., by a command in the input data stream). |
| 1.3.6.1.2.1.43.15.1.1.8 | ScalarprtInterpreterFeedAddressability | read-only | current | The maximum interpreter addressability in the feed direction in 10000 prtMarkerAddressabilityUnits (as specified by prtMarkerDefaultIndex) for this interpreter… |
| 1.3.6.1.2.1.43.15.1.1.9 | ScalarprtInterpreterXFeedAddressability | read-only | current | The maximum interpreter addressability in the cross feed direction in 10000 prtMarkerAddressabilityUnits (as specified by prtMarkerDefaultIndex) for this inter… |
| 1.3.6.1.2.1.43.15.1.1.10 | ScalarprtInterpreterDefaultCharSetIn | read-write | current | The default coded character set for input octets encountered outside a context in which the Page Description Language established the interpretation of the oct… |
| 1.3.6.1.2.1.43.15.1.1.11 | ScalarprtInterpreterDefaultCharSetOut | read-write | current | The default character set for data coming from this interpreter through the printer's output channel (i.e. the 'backchannel'). |
| 1.3.6.1.2.1.43.15.1.1.12 | ScalarprtInterpreterTwoWay | read-only | current | Indicates whether or not this interpreter returns information back to the host. |
| 1.3.6.1.2.1.43.16 | NodeprtConsoleDisplayBuffer | |||
| 1.3.6.1.2.1.43.16.5 | NodeprtConsoleDisplayBufferTable | |||
| 1.3.6.1.2.1.43.16.5.1 | NodeprtConsoleDisplayBufferEntry | |||
| 1.3.6.1.2.1.43.16.5.1.2 | ScalarprtConsoleDisplayBufferText | read-write | current | The content of a line in the logical display buffer of the operator's console of the printer. When a write operation occurs, normally a critical message, to on… |
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.11 | NodehpPrintServer | |||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.3 | Nodenm-system | |||
| 1.3.6.1.4.1.11.2.3.9 | NodenetPeripheral | |||
| 1.3.6.1.4.1.11.2.3.9.1 | NodenetPrinter | |||
| 1.3.6.1.4.1.11.2.3.9.1.1 | NodegeneralDeviceStatus | |||
| 1.3.6.1.4.1.11.2.3.9.1.1.2 | NodegdStatusEntry | |||
| 1.3.6.1.4.1.11.2.3.9.1.1.2.1 | ScalargdStatusLineState | read-only | current | This describes the line state of the peripheral. When non-zero, the peripheral is off-line. When zero the peripheral is on-line. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.8 | ScalargdStatusPaperOut | read-only | current | This indicates that the peripheral is out of paper. off (0), paper-out-or-paper-mount (1), manual-paper-feed-needed (2) |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.9 | ScalargdStatusPaperJam | read-only | current | This indicates that the peripheral has a paper jam. off (0), paper-jam(1) |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.14 | ScalargdStatusBusy | read-only | current | This indicates that the peripheral is busy processing print/plot data. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.15 | ScalargdStatusWait | read-only | current | This indicates that the peripheral is waiting for print/plot data to process. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.16 | ScalargdStatusInitialize | read-only | current | This indicates that the peripheral is initializing or warming up. off (0), initializing (1), warm-up(2) |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.17 | ScalargdStatusDoorOpen | read-only | current | This indicates that the peripheral cover or door is open. |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.18 | ScalargdStatusPrinting | read-only | current | This indicates that the peripheral is printing or otherwise marking or moving paper. off (0), ordinary-page (1), test-fonts-config-or-start-page (2) |
| 1.3.6.1.4.1.11.2.3.9.1.1.2.19 | ScalargdStatusPaperOutput | read-only | current | This indicates that the peripheral has a paper output problem such as the output storage bin being full. off (0), output-storage-full (1) |
| 1.3.6.1.4.1.11.2.3.9.1.1.3 | ScalargdStatusDisplay | read-only | current | The string diplayed on the peripheral front panel. |
| 1.3.6.1.4.1.11.2.3.9.1.1.7 | ScalargdStatusId | read-only | current | A formatted string of NVT ASCII charactersdescribing this peripheral. |
| 1.3.6.1.4.1.11.2.3.9.1.1.10 | ScalargdStatusJobTimeout | read-write | obsolete | This value represents (in seconds) the maximum time of inactivity which must elapse before the print server card switches from the current network protocol to … |
| 1.3.6.1.4.1.11.2.3.9.1.1.13 | ScalargdPasswords | read-write | current | This object is used as a 256 byte NVRAM area for JetAdmin. It is completely managed by JetAdmin. Initially it is initialized to all zeros. A coldboot will re-i… |
| 1.3.6.1.4.1.11.2.3.9.4 | NodenetPML | |||
| 1.3.6.1.4.1.11.2.3.9.4.2 | NodenetPMLmgmt | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1 | Nodedevice | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1 | Nodedevice-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1 | Nodesettings-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.1 | Scalarenergy-star | read-write | optional | Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.2 | Scalarsleep-mode | read-write | optional | Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the device to wake up, if it is in sl… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.50 | Scalarspeed-energy-usage | read-write | optional | Option to keep the engine in a pre-warmed state to speed up first page out. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.99 | Scalarstart-engine-early-warmup | write-only | mandatory | This PML object is used by HP SW drivers to signal the printer that a job is coming, and to start the warm-up process early.The effect of warming up early will… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.1.101 | Scalarenable-engine-early-warmup | read-write | optional | This PML object is used by HP SW to enable/disable the printer to send the signal of warm-up process early to engine. The effect of warming up early will reduc… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2 | Nodestatus-system | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.8 | Scalarinstall-date | read-write | optional | Identifies the date that the device was installed. The format of the string is 'YYYYMMDDHHmmZ'. Where: YYYY is the year. MM is the month (1-12). DD is the day … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.2.17 | Scalardate-and-time | read-write | optional | A C structure containing the following fields: typedef struct { ubyte yr; /* year: 0 to 99 */ ubyte mon; /* month: 1 to 12 */ ubyte day; /* day: 1 to 31 */ uby… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3 | Nodeid | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.1 | Scalarmodel-number | read-only | optional | Identifies the device model number as listed in the HP corporate price list (e.g. C2121A for DeskJet 500C). The string is as specific as possible. Products sho… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.2 | Scalarmodel-name | read-only | optional | Identifies the device model name (e.g. ''DeskJet 1200C''). The string is as specific as possible. Capitalization and spacing should match family naming convent… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.3 | Scalarserial-number | read-only | optional | Identifies the serial number for the device. If the SERIAL-NUMBER object is set by the user, then setting the object does not need to be protected. If the SERI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.5 | Scalarfw-rom-datecode | read-only | optional | Identifies the base system firmware date code. The date code will be encoded in the yyyymmdd format. There may be several versions of the base system firmware.… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.6 | Scalarfw-rom-revision | read-only | optional | This identifies the system code firmware ROM revision code. The format for a revision is major_revision.minor_revision. There may be other ROM revision code ob… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.10 | Scalardevice-name | read-write | optional | User defined device name. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.11 | Scalardevice-location | read-write | optional | User defined device location. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as muc… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.3.12 | Scalarasset-number | read-write | optional | User defined asset number. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much a… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5 | Nodetest | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.5.2 | Scalarprint-internal-page | read-write | optional | Writing this object to a value other than eNotPrintingAnInternalPage causes the device to attempt to print an internally generated page. Reading this object pr… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6 | Nodejob | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1 | Nodesettings-job | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.2 | Scalarcancel-job | write-only | optional | Cancels the print job whose ID matches the value written to the CANCEL-JOB object. The host first learns the job ID using the CURRENT-JOB-PARSING-ID command. I… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.15 | Scalarencryption-password-type | read-write | optional | This Object will allow the Customer to query for the supported encryption type. Its value will be set to AlphaNumeric (Value as 1) if password can be alphanume… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.16 | Scalarencryption-password-max-length | read-write | optional | This Object will allow the Customer to query for the max password length of a secure encrypted job supported by the device. Its value will be set to 12 for 4-l… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.17 | Scalarencryption-password-min-length | read-write | optional | This Object will allow the Customer to query for the min password length of a secure encrypted job supported by the device. Its value will be set to 4. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.18 | Scalarjob-storage-supported | read-write | optional | This object returns eTrue(1) if job storage is supported on this device and eFalse(0) if job storage is not supported. USE: The client or driver can query this… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.19 | Scalarjob-storage-type | read-write | optional | This object indicates what kind of stored job types this device supports. A returned value of none indicates that the job storage is not supported. A returned … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.20 | Scalarjob-storage-mode | read-write | optional | This object indicates what kind of stored job modes this device supports. A returned value of none indicates that the device does not support job storage. A re… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.21 | Scalarjob-storage-available | read-write | optional | This object indicates whether job storage is available on the device. The default is eTrue(1) but if storage is not available for any reason the return value w… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.22 | Scalarjob-storage-encryption | read-write | optional | This object indicates the kind of encryption supported by device. USE The client or driver can query this object to determine the kind of encryption supported … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2 | Nodeactive-print-jobs | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1 | Nodejob-being-parsed | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.2.1.1 | Scalarcurrent-job-parsing-id | read-only | optional | Contains the printer assigned job identification for the job currently being processed by the processing PDL sub-system. The job ID is a monotonically increasi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11 | Nodeerrorlog | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1 | Nodeerror1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.1 | Scalarerror1-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 1 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.2 | Scalarerror1-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.1.3 | Scalarerror1-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2 | Nodeerror2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.1 | Scalarerror2-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 2 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.2 | Scalarerror2-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.2.3 | Scalarerror2-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3 | Nodeerror3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.1 | Scalarerror3-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 3 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.2 | Scalarerror3-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.3.3 | Scalarerror3-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4 | Nodeerror4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.1 | Scalarerror4-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 4 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.2 | Scalarerror4-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.4.3 | Scalarerror4-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5 | Nodeerror5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.1 | Scalarerror5-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 5 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.2 | Scalarerror5-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.5.3 | Scalarerror5-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6 | Nodeerror6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.1 | Scalarerror6-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 6 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.2 | Scalarerror6-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.6.3 | Scalarerror6-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7 | Nodeerror7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.1 | Scalarerror7-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 7 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.2 | Scalarerror7-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.7.3 | Scalarerror7-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8 | Nodeerror8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.1 | Scalarerror8-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 8 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.2 | Scalarerror8-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.8.3 | Scalarerror8-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9 | Nodeerror9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.1 | Scalarerror9-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 9 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 197… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.2 | Scalarerror9-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.9.3 | Scalarerror9-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10 | Nodeerror10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.1 | Scalarerror10-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 10 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.2 | Scalarerror10-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.10.3 | Scalarerror10-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11 | Nodeerror11 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.1 | Scalarerror11-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 11 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.2 | Scalarerror11-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.11.3 | Scalarerror11-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12 | Nodeerror12 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.1 | Scalarerror12-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 12 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.2 | Scalarerror12-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.12.3 | Scalarerror12-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13 | Nodeerror13 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.1 | Scalarerror13-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 13 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.2 | Scalarerror13-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.13.3 | Scalarerror13-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14 | Nodeerror14 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.1 | Scalarerror14-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 14 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.2 | Scalarerror14-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.14.3 | Scalarerror14-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15 | Nodeerror15 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.1 | Scalarerror15-time-stamp | read-only | optional | Contains some sort of time stamp indicating when error 15 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 19… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.2 | Scalarerror15-code | read-only | optional | Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.11.15.3 | Scalarerror15-date-time | read-only | optional | This item contains the date and the time at which an error occurred. The values returned will be in hexadecimal. If the date is 2004-Jul-13 and the time is 03:… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16 | Nodeaccounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1 | Nodeprinter-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1 | Nodeprinted-media-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.1 | Scalarprinted-media-simplex-count | read-only | optional | Total number of simplex pages printed in this media size. Additional information: The 5 usage (simplex/duplex count, simplex/duplex click charge and paper size… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.1.3 | Scalarprinted-media-duplex-count | read-only | optional | Total number of duplex pages printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.2 | Scalarusage-printer-total-charge | read-only | optional | Total printer charge for all paper sizes printed. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.3 | Scalarusage-average-toner-coverage | read-only | optional | Reports the average toner area coverage of all pages printed over the life of the device. Counts pixels on each page, divides pixel count by pixels possible on… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.4 | Scalarusage-staple-count | read-only | optional | Total number of staples used. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.12 | Scalarusage-printer-mono-total-charge | read-only | optional | Total printer charge for all paper sizes printed in monochrome only. Additional information: This is the total charge over the range of all supported media siz… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.13 | Scalarusage-printer-color-total-charge | read-only | optional | Total printer charge for all paper sizes printed in color only. Additional information: This is the total charge over the range of all supported media sizes fo… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.1.44 | Scalarprint-meter-equivalent-impression-count | read-only | optional | This object reports the equivalent number of impressions by category and media size for all pages printed on this device. All printed impressions are normalize… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2 | Nodescanner-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.2.2 | Scalarusage-scanner-total-charge | read-only | optional | Total scanner charge or cost for all paper sizes scanned. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3 | Nodeprinter-color-accounting | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1 | Nodeprinted-media-color-usage | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.1 | Scalarprinted-media-color-simplex-count | read-only | optional | Total number of color simplex pages printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.1.16.3.1.3 | Scalarprinted-media-color-duplex-count | read-only | optional | Total number of color duplex pages printed in this media size. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2 | Nodesource-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2 | Nodescanner | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1 | Nodesettings-scanner | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.20 | Scalarscanner-accessory-adf-sheet-count | read-only | optional | Total number of sheets that have been fed through the Automatic Document Feed (ADF) accessory. Additional information: The Automatic Document Feed (ADF) count … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.21 | Scalarscanner-accessory-flatbed-scan-count | read-only | optional | Total number of scans performed by a flatbed scanner accessory. Additional information: The count is only incremented when a sheet is scanned on the FLATBED. T… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.61 | Scalarscanner-accessory-copy-job-scan-count | read-only | optional | This relates to the number of pages scanned for copying. This item is incremented by 2 for each sheet scanned through the ADF in 2-sided scan mode, and it is i… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.62 | Scalarscanner-accessory-send-job-scan-count | read-only | optional | This relates to the number of pages scanned for fax/send. This item is incremented by 2 for each sheet scanned through the ADF in 2-sided scan mode, and it is … |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.63 | Scalarscanner-accessory-total-copy-pages-printed | read-only | optional | This relates to the number of copy pages printed on a device. The output sheet that is duplexed (made 2- sided) should be counted as 2 pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.89 | Scalarscan-to-folder-count | read-only | optional | The number of scan-to-folder scan jobs. Additional information: The number of scan-to-folder scan jobs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.90 | Scalarfax-job-scan-count | read-only | optional | The number of fax scan jobs. Additional information: The number of fax scan jobs. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.122 | Scalarscanner-accessory-total-copy-mono-pages-printed | read-only | optional | This relates to the number of copy mono pages printed on a device.The output sheet that is duplexed (made 2-sided) should be counted as 2 pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.2.2.1.123 | Scalarscanner-accessory-total-copy-color-pages-printed | read-only | optional | This relates to the number of copy color pages printed on a device.The output sheet that is duplexed (made 2-sided) should be counted as 2 pages. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3 | Nodeprocessing-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3 | Nodepdl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3 | Nodepdl-pcl | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.3.5 | Scalarpcl-total-page-count | read-only | optional | Total number of PCL pages printed by the device. Additional information: The page count is incremented when a sheet of media is pulled from an input tray. A du… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4 | Nodepdl-postscript | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.3.4.5 | Scalarpostscript-total-page-count | read-only | optional | Total number of PostScript pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7 | Nodefax-proc-sub | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1 | Nodesettings-fax-proc-sub | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.1.32 | Scalarfax-print-page-count | read-write | optional | This object tracks the page count for the pages sent to the print engine for fax jobs. In order to write this object SERVICE-PASSWORD must be set correctly. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2 | Nodestatus-fax-proc-sub | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.11 | Scalarafax-send-page-count | read-write | optional | Keeps the total number of pages sent successfully via the analog fax modem. This count would be synchronised with the number of fax jobs sent successfully. The… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.3.7.2.12 | Scalarafax-recv-page-count | read-write | optional | Keeps the total number of pages received successfully via the analog fax modem. This count would be synchronised with the number of fax jobs received successfu… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4 | Nodedestination-subsystem | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1 | Nodeprint-engine | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2 | Nodestatus-prt-eng | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.5 | Scalartotal-engine-page-count | read-write | optional | Total number of pages printed by the device. POS indicates if the total engine page count is kept in NVRAM, and the maximum supported value before the page cou… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.6 | Scalartotal-mono-page-count | read-only | optional | Total number of black pages printed by the device. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.7 | Scalartotal-color-page-count | read-only | optional | Total number of color pages printed by the device. Additional information: Any page with one or more color pixels is counted as a color page. Pages that only c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.2.22 | Scalarduplex-page-count | read-only | optional | Total number of sheets of media that have been duplex printed. A sheet is counted if it travels through the duplex page path, regardless of whether or not mark… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3 | Nodeintray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.2 | Nodestatus-intray | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.2.2 | Scalarnot-ready-tray-empty | read-only | optional | Indicates which trays contain no media causing the device to be not ready. Some devices may treat tray missing as a tray empty condition. Additional informatio… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3 | Nodeintrays | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1 | Nodeintray1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.1 | Scalartray1-media-size-loaded | read-write | optional | Returns the media size that is currently configuredconfigured in tray #1. This object can be set to indicate the media size currently loaded, if the printer su… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.4 | Scalartray1-media-name | read-write | optional | Contains a string identifying the media that is currently loaded in tray #1. The media name string is the name associated with the loaded media. The strings id… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.10 | Scalartray1-custom-media-width | read-only | optional | Width of media (in decipoints) loaded in tray 1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.11 | Scalartray1-custom-media-length | read-only | optional | Length of media (in decipoints) loaded in tray 1. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.17 | Scalartray1-type | read-write | optional | Indicates the type of input media support installed. eTray (1) if the paper source is a tray eManualRoll (2) if the paper source is a manually loaded roll eArs… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.1.20 | Scalartray1-media-key | read-only | optional | Contains the media key (index) in the database. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2 | Nodeintray2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.1 | Scalartray2-media-size-loaded | read-write | optional | Returns the media size that is currently configured in tray #2. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.4 | Scalartray2-media-name | read-write | optional | Contains a string identifying the media that is currently loaded in tray 2. See TRAY1-MEDIA-NAME for a complete description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.10 | Scalartray2-custom-media-width | read-only | optional | Width of media (in decipoints) loaded in tray 2. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.11 | Scalartray2-custom-media-length | read-only | optional | Length of media (in decipoints) loaded in tray 2. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.17 | Scalartray2-type | read-write | optional | Indicates the type of input media support installed. eTray (1) if the paper source is a tray eManualRoll (2) if the paper source is a manually loaded roll eArs… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.2.20 | Scalartray2-media-key | read-only | optional | Contains the media key (index) in the database. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3 | Nodeintray3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.1 | Scalartray3-media-size-loaded | read-write | optional | Returns the media size that is currently configured in tray #3. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.4 | Scalartray3-media-name | read-write | optional | Contains a string identifying the media that is currently loaded in tray 3. See TRAY1-MEDIA-NAME for a complete description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.10 | Scalartray3-custom-media-width | read-only | optional | Width of media (in decipoints) loaded in tray 3. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.11 | Scalartray3-custom-media-length | read-only | optional | Length of media (in decipoints) loaded in tray 3. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.17 | Scalartray3-type | read-write | optional | Indicates the type of input media support installed. eTray (1) if the paper source is a tray eManualRoll (2) if the paper source is a manually loaded roll eArs… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.3.20 | Scalartray3-media-key | read-only | optional | Contains the media key (index) in the database. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5 | Nodeintray5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.1 | Scalartray5-media-size-loaded | read-write | optional | Returns the media size that is currently configured in tray #4. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.4 | Scalartray5-media-name | read-write | optional | Contains a string identifying the media that is currently loaded in tray 4. See TRAY1-MEDIA-NAME for a complete description. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.10 | Scalartray5-custom-media-width | read-only | optional | Width of media (in decipoints) loaded in tray 4. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.11 | Scalartray5-custom-media-length | read-only | optional | Length of media (in decipoints) loaded in tray 4. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.17 | Scalartray5-type | read-write | optional | Indicates the type of input media support installed. eTray (1) if the paper source is a tray eManualRoll (2) if the paper source is a manually loaded roll eArs… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.3.3.5.20 | Scalartray5-media-key | read-only | optional | Contains the media key (index) in the database. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8 | Nodeprint-media | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1 | Nodesettings-print-media | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.1.3 | Scalarmedia-names-enabled | read-write | optional | The value of this object controls whish of the MEDIAx-NAME objects are supported. Of a bit is set to zero then the attempt to get or set the corresponding MEDI… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3 | Nodemedia-info | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1 | Nodemedia1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.1.1 | Scalarmedia1-name | read-write | optional | Media 1 name. Additional information: The symbol set for this string is Roman-8. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2 | Nodemedia2 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.2.1 | Scalarmedia2-name | read-write | optional | Media 2 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3 | Nodemedia3 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.3.1 | Scalarmedia3-name | read-write | optional | Media 3 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4 | Nodemedia4 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.4.1 | Scalarmedia4-name | read-write | optional | Media 4 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5 | Nodemedia5 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.5.1 | Scalarmedia5-name | read-write | optional | Media 5 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6 | Nodemedia6 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.6.1 | Scalarmedia6-name | read-write | optional | Media 6 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7 | Nodemedia7 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.7.1 | Scalarmedia7-name | read-write | optional | Media 7 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8 | Nodemedia8 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.8.1 | Scalarmedia8-name | read-write | optional | Media 8 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9 | Nodemedia9 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.9.1 | Scalarmedia9-name | read-write | optional | Media 9 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10 | Nodemedia10 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.10.1 | Scalarmedia10-name | read-write | optional | Media 10 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11 | Nodemedia11 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.11.1 | Scalarmedia11-name | read-write | optional | Media 11 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12 | Nodemedia12 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.12.1 | Scalarmedia12-name | read-write | optional | Media 12 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13 | Nodemedia13 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.13.1 | Scalarmedia13-name | read-write | optional | Media 13 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14 | Nodemedia14 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.14.1 | Scalarmedia14-name | read-write | optional | Media 14 name. Additional information: See MEDIA1-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15 | Nodemedia15 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.15.1 | Scalarmedia15-name | read-write | optional | Media 15 name. Additional information: The maximum supported string length is 24 bytes. If the user entered string is too long, the device will store the first… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16 | Nodemedia16 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.16.1 | Scalarmedia16-name | read-write | optional | Media 16 name. Additional information: See MEDIA15-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17 | Nodemedia17 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.17.1 | Scalarmedia17-name | read-write | optional | Media 17 name. Additional information: See MEDIA15-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18 | Nodemedia18 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.18.1 | Scalarmedia18-name | read-write | optional | Media 18 name. Additional information: See MEDIA15-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19 | Nodemedia19 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.8.3.19.1 | Scalarmedia19-name | read-write | optional | Media 19 name. Additional information: See MEDIA15-NAME. |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10 | Nodeconsumables | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1 | Nodeconsumables-1 | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1 | Nodeconsumable-status | |||
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.1 | Scalarconsumable-status-cartridge-model | read-only | optional | This object is used to read the cartridge model number associated with this consumable. Additional information: This object will only exist for Authentic HP co… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.2 | Scalarconsumable-status-manufacturing-date | read-only | optional | This object is used to report the date on which this consumable was manufactured. The format of the string is 'YYYYMMDD', where YYYY is the year, MM is the mon… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.3 | Scalarconsumable-status-serial-number | read-only | optional | This object is used to report the serial number for this consumable. Additional information: This object will only exist for Authentic HP consumables. If the c… |
| 1.3.6.1.4.1.11.2.3.9.4.2.1.4.1.10.1.1.8 | Scalarconsumable-status-first-install-date | read-only | optional | This object is used to report the date on which this consumable was first installed. The format of the string is 'YYYYMMDD'. Where: YYYY is the year. MM is the… |
| 1.3.6.1.4.1.11.2.4 | Nodeinterface | |||
| 1.3.6.1.4.1.11.2.4.3 | NodenpCard | |||
| 1.3.6.1.4.1.11.2.4.3.1 | NodenpSys | |||
| 1.3.6.1.4.1.11.2.4.3.1.10 | ScalarnpSysModelNumber | read-only | current | The HP model number of the device. |
| 1.3.6.1.4.1.11.2.4.3.1.16 | ScalarnpSysCardServices1 | read-only | current | This object is a bitmap showing what services are available on the card. Bit 0 - IPX/SPX/NCP protocol stack Bit 1 - IP/TCP protocol stack Bit 2 - LLC/DLC proto… |
| 1.3.6.1.4.1.11.2.4.3.1.17 | ScalarnpSysCardServices2 | read-only | current | This object is a bitmap showing what services are available on the card. Bit 0 - XIP2 Bit 1 - PML Get/Set Bit 2 - PML Traps Bit 3 - Scan to Web Browser Bit 4 -… |
| 1.3.6.1.4.1.11.2.4.3.1.22 | ScalarnpSysCardServices3 | read-only | current | This object is a bitmap showing what services are available on the card. Bit 0 - 100T Bit 1 - Token Ring 802.5 Bit 2 - 802.11b Bit 3 - 80211.a Bit 4 - Bluetoot… |
| 1.3.6.1.4.1.11.2.4.3.5 | NodenpCfg | |||
| 1.3.6.1.4.1.11.2.4.3.5.1 | ScalarnpCfgSource | read-write | current | This object indicates how the device obtained its IP configuration. |
| 1.3.6.1.4.1.11.2.4.3.5.2 | ScalarnpCfgYiaddr | read-write | current | The IP address assigned to the card from the BOOTP reply yiaddr field. |
| 1.3.6.1.4.1.11.2.4.3.5.3 | ScalarnpCfgSiaddr | read-only | current | The IP address of the TFTP server from the BOOTP reply siaddr field. |
| 1.3.6.1.4.1.11.2.4.3.5.5 | ScalarnpCfgLogServer | read-write | current | The IP address of the Syslog Server. If set via BOOTP (Tag: 7 field, lg=<ipaddress> ) then SNMP set will fail. If not set via BOOTP then SNMP set will succeed.… |
| 1.3.6.1.4.1.11.2.4.3.5.12 | ScalarnpCfgSubnetMask | read-write | current | The subnet mask associated with the IP address of this card. |
| 1.3.6.1.4.1.11.2.4.3.5.13 | ScalarnpCfgDefaultGateway | read-write | current | This variable contains the IP address of the default router for this card. |
| 1.3.6.1.4.1.11.2.4.3.5.16 | ScalarnpCfgDomainName | read-write | current | The print server domain name. |
| 1.3.6.1.4.1.11.2.4.3.5.18 | ScalarnpCfgIPP | read-write | current | Below are the different values accepted by this OID. 0 - Disable IPP and IPP-S 1 - Enable IPP and IPP-S 2 - Enable IPP-S only 3 - Enable IPP only |
| 1.3.6.1.4.1.11.2.4.3.5.21 | ScalarnpCfgDNSNameServerId | read-write | current | IP address of Primary DNS name-server. |
| 1.3.6.1.4.1.11.2.4.3.5.22 | ScalarnpCfgWINSNameServerIdPri | read-write | current | Primary name server for NetBIOS over TCP/IP. |
| 1.3.6.1.4.1.11.2.4.3.5.23 | ScalarnpCfgWINSNameServerIdSec | read-write | current | Secondary name server for NetBIOS over TCP/IP. |
| 1.3.6.1.4.1.11.2.4.3.5.29 | ScalarnpCfgPasswd1 | read-write | current | Password for root or administrator. Get request returns either 'SET' or 'NOT_SET'. |
| 1.3.6.1.4.1.11.2.4.3.5.35 | ScalarnpCfgLinkType | read-write | current | Network link speed and communication mode. |
| 1.3.6.1.4.1.11.2.4.3.5.40 | ScalarnpCfgSnmpDefaultReadCmnty | read-write | current | Controls Default Read Community Name access. (0) = Disabled, i.e., default get community names FAIL to access target. (1) = Enabled, i.e., default get communit… |
| 1.3.6.1.4.1.11.2.4.3.5.44 | ScalarnpCfgBonjourServiceName | read-write | current | The name by which all the Jetdirect services will be advertised by Multicast Domain Name System (Bonjour). Must set a non empty string |
| 1.3.6.1.4.1.11.2.4.3.5.45 | ScalarnpCfgBonjourHighestPriorityService | read-write | current | This object specifies the highest priority service advertised by Bonjour. When this object is change, all services will be re-advertised with the changed prior… |
| 1.3.6.1.4.1.11.2.4.3.5.46 | ScalarnpCfgBonjourDomainName | read-only | current | The name used as the 'target name' in the DNS SRV records by Multicast Domain Name System (Bonjour). |
| 1.3.6.1.4.1.11.2.4.3.5.47 | ScalarnpCfgDNSNameServerIdSecondary | read-write | current | IP address of Secondary DNS name-server. |
| 1.3.6.1.4.1.11.2.4.3.5.50 | ScalarnpCfgIPv6ConfigState | read-only | current | IPv6 stack status event; IPv6 enabled/disabled. |
| 1.3.6.1.4.1.11.2.4.3.5.56 | ScalarnpCfgIPv6DNSAddr1 | read-write | current | IPv6 DNS Address, priority 1. |
| 1.3.6.1.4.1.11.2.4.3.5.57 | ScalarnpCfgIPv6DNSAddr2 | read-write | current | IPv6 DNS Address, priority 2. |
| 1.3.6.1.4.1.11.2.4.3.5.59 | ScalarnpCfgIPConfigPrecedence | read-write | current | Allows to set uniform rules for parameter overwrite by different configuration methods. 0 - Manual 1 - TFTP 2 - DHCPv4/Bootp 3 - DHCPv6 - only if ipv6 is suppo… |
| 1.3.6.1.4.1.11.2.4.3.5.72 | ScalarnpCfgSTAWirelessMode | read-write | current | Different standardized 802.11 wireless modes. The following values are defined: 0 - b/g/n-mode (Default) 1 - n-mode only Note: Guard Interval, AMSDU, Block Ack… |
| 1.3.6.1.4.1.11.2.4.3.5.85 | ScalarnpCfgWiFiDirectChannelNumber | read-write | current | The WiFi channel number used for Wireless/Wi-Fi Direct. Region Allowed Channels US & Worldwide Safe 1 - 11 Rest of the world 1 - 13 If wireless station is enab… |
| 1.3.6.1.4.1.11.2.4.3.5.86 | ScalarnpCfgWiFiDirectSSIDPrefix | read-only | current | The prefix of the network name (SSID) used for Wireless/Wi-Fi Direct. The value is 'HP-Print-XY-' where XY is the last two hex characters from the wireless MAC… |
| 1.3.6.1.4.1.11.2.4.3.5.87 | ScalarnpCfgWiFiDirectSSIDSuffix | read-write | current | The modifiable suffix of the network name (SSID) used for Wireless/Wi-Fi Direct. The default is '<sub brand> <hp model>', but it can be different depending on … |
| 1.3.6.1.4.1.11.2.4.3.5.88 | ScalarnpCfgWiFiDirectConnectionSecurity | read-write | optional | This is used to select the Wi-Fi Direct connection security method which differentiates how the connection is done between a mobile client and the printer. The… |
| 1.3.6.1.4.1.11.2.4.3.5.97 | ScalarnpCfgSysLogProtocol | read-write | current | Protocol used by SysLog server for communication. Default set to UDP |
| 1.3.6.1.4.1.11.2.4.3.5.98 | ScalarnpCfgSysLogPort | read-write | current | Sys Log Server Port. Default set to port number 514 |
| 1.3.6.1.4.1.11.2.4.3.5.99 | ScalarnpCfgHpDAPAgentManualServerAddr | read-write | current | Zero when Empty |
| 1.3.6.1.4.1.11.2.4.3.6 | NodenpTcp | |||
| 1.3.6.1.4.1.11.2.4.3.6.11 | ScalarnpTcpSyslogMax | read-write | current | Maximum number of syslog packets to be sent per minute. 0 = Disabled. |
| 1.3.6.1.4.1.11.2.4.3.6.12 | ScalarnpTcpAppSyslogPriority | read-write | current | Priority below which the syslog messages will not be sent. Valid priority levels = 0 through 7. Disabled = 8. |
| 1.3.6.1.4.1.11.2.4.3.7 | NodenpCtl | |||
| 1.3.6.1.4.1.11.2.4.3.7.21 | ScalarnpCtlSLP | read-write | current | Configure Service Location Protocol (SLP) service. (0) = SLP disabled (1) = SLP enabled |
| 1.3.6.1.4.1.11.2.4.3.7.22 | ScalarnpCtlLPD | read-write | current | Configure Line Printer Daemon Protocol (LPD) service. (0) = LPD disabled (1) = LPD enabled |
| 1.3.6.1.4.1.11.2.4.3.7.24 | ScalarnpCtl9100 | read-write | current | Configure TCP port 9100 printing. (0) = port 9100 printing disabled (1) = port 9100 printing enabled |
| 1.3.6.1.4.1.11.2.4.3.7.26 | ScalarnpCtlSysLog | read-write | current | Configure Syslog service. (0) = Syslog service disabled (1) = Syslog service enabled Enabled by default. |
| 1.3.6.1.4.1.11.2.4.3.7.27 | ScalarnpCtlSnmpVersionAccess | read-write | current | Manages an SNMP version's read and write access to the MIB. |
| 1.3.6.1.4.1.11.2.4.3.7.28 | ScalarnpCtlSnmpV3InitAccount | read-write | current | Used to create initial SNMPv3 account. The following rules apply: 0 = clear init account, only if previously 0. 4 = Block init account, only cold reset will cl… |
| 1.3.6.1.4.1.11.2.4.3.7.29 | ScalarnpCtlBonjour | read-write | current | Configure Multicast Domain Name Service. (0) = Bonjour disabled (1) = Bonjour enabled |
| 1.3.6.1.4.1.11.2.4.3.7.32 | ScalarnpCtlNetworkConnectionMode | read-write | current | This object controls the selection of the active network interface used for communication. This is applicable to products supporting dual wired and wireless ne… |
| 1.3.6.1.4.1.11.2.4.3.7.36 | ScalarnpCtlWSDiscovery | read-write | current | Web Services Discovery enable/disable. |
| 1.3.6.1.4.1.11.2.4.3.7.37 | ScalarnpCtlWSPrint | read-write | current | Web Services Print enable/disable. |
| 1.3.6.1.4.1.11.2.4.3.7.38 | ScalarnpCtlLLMNR | read-write | current | Link-Local Multicast Name Resolution( LLMNR ) enable/disable. |
| 1.3.6.1.4.1.11.2.4.3.7.39 | ScalarnpCtlWPAD | read-write | current | Used to Disable and Enable Web-Proxy Auto Discovery. |
| 1.3.6.1.4.1.11.2.4.3.7.47 | ScalarnpCtlFpDot11WirelessState | read-write | current | Use for enabling and disabling Wireless Radio. The following values are defined: Disable = 0 Enable = 1 Default = 1(Enabled) |
| 1.3.6.1.4.1.11.2.4.3.7.51 | ScalarnpCtlDot11nSTAGuardInterval | read-write | current | The guard interval is the space between symbols (characters) being transmitted. The guard interval is there to eliminate intersymbol interference, which is ref… |
| 1.3.6.1.4.1.11.2.4.3.7.52 | ScalarnpCtlDot11nSTAAMSDUAggregation | read-write | current | 802.11n can send multiple frames per single access to the medium by combining frames together into one larger frame. There are two forms of frame aggregation: … |
| 1.3.6.1.4.1.11.2.4.3.7.53 | ScalarnpCtlDot11nSTABlockACKs | read-write | current | This mechanism allows each of the aggregated data frames to be individually acknowledged or retransmitted if affected by an error. Block acknowledgement compil… |
| 1.3.6.1.4.1.11.2.4.3.7.54 | ScalarnpCtlDot11nSTAAMPDUAggregation | read-write | current | 802.11n can send multiple frames per single access to the medium by combining frames together into one larger frame. There are two forms of frame aggregation: … |
| 1.3.6.1.4.1.11.2.4.3.7.57 | ScalarnpCtlWiFiDirectSSIDBroadcast | read-write | current | This is used to allow or hide broadcasting of the SSID (Network name). Allowed(Default) = 1 Not Allowed = 0 Not Allowed (0) only takes effect when npCfgWiFiDir… |
| 1.3.6.1.4.1.11.2.4.3.7.58 | ScalarnpCtlWiFiDirectHidePassphrase | read-write | optional | This controls display of the Wireless passphrase on configuration reports/pages or on the control panel. Show = 0 Hide = 1 This object also controls whether or… |
| 1.3.6.1.4.1.11.2.4.3.7.59 | ScalarnpCtlWiFiDirectHideSsid | read-write | optional | This controls display of the network name (SSID) on configuration reports/pages or on the control panel. Show = 0 Hide = 1 Hide (1) only takes effect when npCf… |
| 1.3.6.1.4.1.11.2.4.3.7.65 | ScalarnpCtlHpDAPAgentAnnounceState | read-write | current | Disable(Default) = 0 Enable = 1 |
| 1.3.6.1.4.1.11.2.4.3.7.66 | ScalarnpCtlHpDAPAgentRequireTrustedAuth | read-write | current | Disable(Default) = 0 Enable = 1 |
| 1.3.6.1.4.1.11.2.4.3.7.67 | ScalarnpCtlDeviceMode | read-only | current | Use to check the current state of the device. WiredStationMode = 1 WirelessStationMode = 2 AccessPointMode = 3 |
| 1.3.6.1.4.1.11.2.4.3.7.68 | ScalarnpCtlAirPrintStatus | read-write | current | Use to Enabled/Disabled AirPrint functionality. Disable = 0 Enable(Default) = 1 |
| 1.3.6.1.4.1.11.2.4.3.7.73 | ScalarnpCtlWirelessSTAState | read-write | current | Configure 802.11 wireless station (STA) functionality 0 = Wireless station is disabled 1 = Wireless station is enabled |
| 1.3.6.1.4.1.11.2.4.3.7.74 | ScalarnpCtlWiFiDirectState | read-write | current | Configure 802.11 Wireless/Wi-Fi Direct functionality 0 = Wireless/Wi-Fi Direct is disabled 1 = Wireless/Wi-Fi Direct is enabled |
| 1.3.6.1.4.1.11.2.4.3.7.79 | ScalarnpCtlAirScan | read-write | optional | Used to Enable/Disable the AirScan and Secure AirScan service. The value for this OID is a bit map with the following assignment Bit 0 - AirScan Bit 1 - Secure… |
| 1.3.6.1.4.1.11.2.4.3.7.80 | ScalarnpCtlAirFax | read-write | optional | Used to Enable/Disable the AirFax service. Disable = 0 Enable (Default) = 1 |
| 1.3.6.1.4.1.11.2.4.3.7.81 | ScalarnpCtlGCPrint | read-write | optional | Used to Enable/Disable/Remove(Hide) the GC Print service. Disable = 0 Enable (Default) = 1 Remove = 2 If disable is specified and the device is registered for … |
| 1.3.6.1.4.1.11.2.4.3.7.83 | ScalarnpCtlRebootMode | read-write | optional | Used to set a reboot mode on the device. normal = 0 (default) recovery = 1 (firmware with minimal features, once in this mode, device will check a web URL for … |
| 1.3.6.1.4.1.11.2.4.3.8 | NodenpNpi | |||
| 1.3.6.1.4.1.11.2.4.3.8.3 | NodenpNpiPeripheralAttributeEntry | |||
| 1.3.6.1.4.1.11.2.4.3.8.3.2 | ScalarnpNpiPaeClass | read-only | current | The class assigned to the peripheral onto which this card is plugged. |
| 1.3.6.1.4.1.11.2.4.3.8.3.3 | ScalarnpNpiPaeIdentification | read-only | current | The Identification number of the peripheral. These values are defined in the MIO spec. DesignJet, PaintJet XL300, and DesignJet/600 peripherals will identify t… |
| 1.3.6.1.4.1.11.2.4.3.10 | NodenpIpx | |||
| 1.3.6.1.4.1.11.2.4.3.10.6 | ScalarnpIpxSapInfo | read-only | current | This is a 50 byte array that contains the following information. 2 bytes: bindery object type (always 030c in hi-lo order) 12 bytes: Mac address of card (ASCII… |
| 1.3.6.1.4.1.11.2.4.3.13 | NodenpPort | |||
| 1.3.6.1.4.1.11.2.4.3.13.1 | ScalarnpPortNumPorts | read-only | current | The number of peripheral interfaces supported by this device. |
| 1.3.6.1.4.1.11.2.4.3.16 | NodenpDhcp | |||
| 1.3.6.1.4.1.11.2.4.3.16.4 | ScalarnpDhcpFQDNBehavior | read-write | current | This object defines the FQDN behavior in Jetdirect. Set this to ( 0 ) - Present Jetdirect Behavior ( 1 ) - RFC 4702 compliant behavior |
| 1.3.6.1.4.1.11.2.4.3.18 | NodenpWeb | |||
| 1.3.6.1.4.1.11.2.4.3.18.12 | ScalarnpWebProxyServerId | read-write | current | IP address or hostname of web proxy server. |
| 1.3.6.1.4.1.11.2.4.3.18.13 | ScalarnpWebProxyServerPort | read-write | current | IP port of web proxy server |
| 1.3.6.1.4.1.11.2.4.3.18.14 | ScalarnpWebProxyUserName | read-write | current | Proxy web user identification |
| 1.3.6.1.4.1.11.2.4.3.18.15 | ScalarnpWebProxyUserPasswd | read-write | current | Proxy web user password |
| 1.3.6.1.4.1.11.2.4.3.20 | NodenpSecurity | |||
| 1.3.6.1.4.1.11.2.4.3.20.1 | ScalarnpSecurityDot11ServerAuthentication | read-write | current | Server-Based Authentication with the following bitwise values: None(0), EAP-MD5(1), EAP-TLS(2), LEAP(4), PEAP(8), TTLS(16) |
| 1.3.6.1.4.1.11.2.4.3.20.2 | ScalarnpSecurityDot1xEapMd5Identity | read-write | current | Radius MD5 authentication User Name. |
| 1.3.6.1.4.1.11.2.4.3.20.3 | ScalarnpSecurityDot1xTLSAuthServerId | read-write | current | TLS authentication Server ID. |
| 1.3.6.1.4.1.11.2.4.3.20.4 | ScalarnpSecurityPublicKey | read-only | current | The public key of a public/private key pair to be used by applications to set encrypted values. |
| 1.3.6.1.4.1.11.2.4.3.20.6 | ScalarnpSecurityDot11EncryptedDot1xEapMd5Secret | write-only | current | The encrypted dot1xEapMD5Secret authentication password. Use the npSecurityPublicKey to encrypt this value. Setting this object will cause the card to reconfig… |
| 1.3.6.1.4.1.11.2.4.3.20.7 | NodenpSecurityDot11EncryptedWEPKeyTable | |||
| 1.3.6.1.4.1.11.2.4.3.20.7.1 | NodenpSecurityDot11EncryptedWEPKeyEntry | |||
| 1.3.6.1.4.1.11.2.4.3.20.7.1.2 | ScalarnpSecurityDot11EncryptedWEPKey | write-only | current | The encrypted WEP Key value. Use the npSecurityDot11PublicKey to encrypt this value. Setting this object will cause the card to reconfigure. |
| 1.3.6.1.4.1.11.2.4.3.20.8 | ScalarnpSecurityDot11SignalStrength | read-only | current | A weighted average over time of the signal strength between the access point and the print server in infrastructure mode. Not applicable when in ad hoc mode. |
| 1.3.6.1.4.1.11.2.4.3.20.9 | NodenpSecurityDot11SSIDTable | |||
| 1.3.6.1.4.1.11.2.4.3.20.9.1 | NodenpSecurityDot11SSIDEntry | |||
| 1.3.6.1.4.1.11.2.4.3.20.9.1.2 | ScalarnpSecurityDot11SSID | read-only | current | A discovered SSID value. |
| 1.3.6.1.4.1.11.2.4.3.20.10 | ScalarnpSecurityDot11SSIDTableNumEntries | read-only | current | Displays the number of discovered SSIDs in the SSID Table. |
| 1.3.6.1.4.1.11.2.4.3.20.13 | ScalarnpSecuritySnmpV3EncryptedUserName | write-only | current | The encrypted SNMPv3 User Name. Use the npSecurityPublicKey to encrypt this value. The new SNMPv3 User Account will be installed after the npSecuritySnmpV3Encr… |
| 1.3.6.1.4.1.11.2.4.3.20.14 | ScalarnpSecuritySnmpV3AuthKeyPassPhrase | write-only | current | The encrypted SNMPv3 Authentication passphrase or key . Use the npSecurityPublicKey to encrypt this value. The new SNMPv3 User Account will be installed after … |
| 1.3.6.1.4.1.11.2.4.3.20.15 | ScalarnpSecuritySnmpV3PrivKeyPassPhrase | write-only | current | The encrypted SNMPv3 Privacy passphrase or key. Use the npSecurityPublicKey to encrypt this value. When setting this object, all three user account objects (np… |
| 1.3.6.1.4.1.11.2.4.3.20.19 | ScalarnpSecurityDot11ExactMatchServerId | read-write | current | Indicates if an exact match is required on the EAP Server ID. |
| 1.3.6.1.4.1.11.2.4.3.20.20 | ScalarnpSecurityDot11EncryptionStrength | read-write | current | Indicates the EAP encrytpion strength. |
| 1.3.6.1.4.1.11.2.4.3.20.23 | ScalarnpSecuritySslRedirection | read-write | current | Setting this object causes the SSL redirection connection to be enabled or disabled. |
| 1.3.6.1.4.1.11.2.4.3.20.27 | ScalarnpSecurityServicesSupported | read-only | current | BITWISE indication of the 802.11 security services this device supports. The following bits are defined: MD5 (0) TLS (1) TTLS (2) LEAP (3) PEAP (4) Reserved (5… |
| 1.3.6.1.4.1.11.2.4.3.20.28 | ScalarnpSecurityDot11Encryption | read-write | current | 802.11 encryption method currently enabled. The following values are defined: NONE (0x00) SSN/WEP (0x01) TKIP (0x02) AES (0x03) AUTO (0x04) Reserved (5 - 31) I… |
| 1.3.6.1.4.1.11.2.4.3.20.29 | ScalarnpSecurityDot11MulticastCipher | read-write | current | BITWISE indication of the multicast cipher method currently enabled. At minimum, one bit must be set. The following bits are defined: WEP (0) WPA (1) Reserved … |
| 1.3.6.1.4.1.11.2.4.3.20.36 | ScalarnpSecurityDot11EncryptedWPAConfigPSKPassPhrase | write-only | current | The encrypted WPA Config PSK PassPhrase. Use the npSecurityPublicKey to encrypt this value |
| 1.3.6.1.4.1.11.2.4.3.20.40 | ScalarnpSecuritySslEncryptionStrength | read-write | current | The SSL Encryption Strength. Setting to Low, Medium or High decides the set of Cipher Suites that would be supported by the device. |
| 1.3.6.1.4.1.11.2.4.3.20.42 | ScalarnpSecurityDot11DynamicEncryption | read-write | current | WPA mode. (0x00) = NONE (0x01) = BASIC (0x02) = WPA (0x03) = WPA2 (0x04) = AUTO |
| 1.3.6.1.4.1.11.2.4.3.20.43 | ScalarnpSecurityDot11LinkAuthentication | read-write | current | DOT11 Link Authentication modes. (1) = OPEN (2) = SHARED-KEY (128) = LEAP (143) = AUTO We can set the Link Authentication using the object dot11AuthenticationA… |
| 1.3.6.1.4.1.11.2.4.3.20.44 | ScalarnpSecuritySnmpV3AuthAlgorithm | read-write | current | Indicates the Authentication Algorithm used. It can have the value MD5 or SHA-1. This key will have a default value set to MD5. The following values are define… |
| 1.3.6.1.4.1.11.2.4.3.20.45 | ScalarnpSecuritySnmpV3PrivAlgorithm | read-write | current | Indicates the Privacy Algorithm used. It can have the value DES or AES-128. This key will have a default value set to DES. The following values are defined: DE… |
| 1.3.6.1.4.1.11.2.4.3.20.46 | ScalarnpSecuritySnmpV3PassPhrase | read-write | current | Indicates whether npSecuritySnmpV3AuthKeyPassPhrase and npSecuritySnmpV3PrivKeyPassPharse OIDs will have Passphrase or key value. Key Value 0 Passphrase 1 |
| 1.3.6.1.4.1.11.2.4.3.20.55 | ScalarnpSecurityWirelessDirectEncryptedPassPhrase | write-only | current | The WPA2 Passphrase or pre-shared key for secure Wireless Direct. The values allowed are 8 to 63 printable ASCII characters for passphrase or a 64 character he… |
| 1.3.6.1.4.1.11.2.4.3.20.57 | ScalarnpSecurityDot1xFailSafe | read-write | current | After configuring 802.1x on the printer and switching it over to a secured network, if authentication is successful printer retains connectivity and if it fail… |
| 1.3.6.1.4.1.11.2.4.3.20.58 | ScalarnpSecuritySSLProtocol | read-write | current | Different SSL Protocols can be selected with the following bitwise values: SSL 3.0 (1) TLS 1.0 (2) TLS 1.1 (4) TLS 1.2 (8) |
| 1.3.6.1.4.1.11.2.13 | Nodetrap | |||
| 1.3.6.1.4.1.11.2.13.1 | NodetrapDest | |||
| 1.3.6.1.4.1.11.2.13.1.1 | ScalartrapDestinationNum | read-only | current | The number of trap destinations. |
| 1.3.6.1.4.1.11.2.13.1.3 | ScalartrapTest | read-write | current | Causes agent to send an snmp trap to hosts registered in the trap destination table. Value specified will be used as the specific trap id. |
| 1.3.6.1.4.1.11.2.13.1.4 | ScalartrapSource | read-only | current | Sets the agent internal source for traps. Possibilities are as follows: 0 = ALL_TRAPS_ON 1 = ASYNC_PERIPHERAL_STATUS traps only 2 = proprietary PML traps only … |
| 1.3.6.1.4.1.11.2.13.1.5 | ScalartrapFilterDelay | read-write | current | The purpose of the trap filter feature is to prevent multiple traps of the same specificTrapId to be sent within a short period of time. This object assigns th… |
| 1.3.6.1.4.1.11.2.13.1.6 | ScalartrapFQDNNum | read-only | current | Number of trapFQDNTable rows. |
| 1.3.6.1.4.1.11.2.15 | NodesnmpAccess | |||
| 1.3.6.1.4.1.11.2.15.1 | Nodecommunity | |||
| 1.3.6.1.4.1.11.2.15.1.1 | ScalarsetCommunityName | read-write | current | This object controls access of snmp read-write requests. Factory default configuration provides authentication of incoming packets with community names: intern… |
| 1.3.6.1.4.1.11.2.15.1.2 | ScalargetCommunityName | read-write | current | This object controls access of snmp read requests. Factory default configuration provides authentication of incoming packets with community names: internal and… |
| 1.3.6.1.4.1.2699.1.2 | NodeppmMIB | |||
| 1.3.6.1.4.1.2699.1.2.1 | NodeppmMIBObjects | |||
| 1.3.6.1.4.1.2699.1.2.1.1 | NodeppmGeneral | |||
| 1.3.6.1.4.1.2699.1.2.1.1.1 | ScalarppmGeneralNaturalLanguage | read-only | current | The natural language tag (RFC 3066), specified in US-ASCII, for all localized text string objects defined in this MIB (syntax of 'SnmpAdminString'), or the emp… |
| 1.3.6.1.4.1.2699.1.2.1.1.2 | ScalarppmGeneralNumberOfPrinters | read-only | current | The number of printers supported on this network system, i.e., the number of entries in the 'ppmPrinterTable' below, or zero if no printers are currently confi… |
| 1.3.6.1.4.1.2699.1.2.1.1.3 | ScalarppmGeneralNumberOfPorts | read-only | current | The number of printer ports supported on this network system, i.e., the number of entries in the 'ppmPortTable' below, or zero if no printer ports are currentl… |
| 1.3.6.1.4.1.2699.1.2.1.2 | NodeppmPrinter | |||
| 1.3.6.1.4.1.2699.1.2.1.2.1 | NodeppmPrinterTable | |||
| 1.3.6.1.4.1.2699.1.2.1.2.1.1 | NodeppmPrinterEntry | |||
| 1.3.6.1.4.1.2699.1.2.1.2.1.1.2 | ScalarppmPrinterName | read-only | current | A user friendly name for this printer that may be used to facilitate user selection of a printer supported by a network system, in the locale specified by 'ppm… |
| 1.3.6.1.4.1.2699.1.2.1.2.1.1.3 | ScalarppmPrinterIEEE1284DeviceId | read-only | current | The IEEE 1284 device ID for this printer, a set of capabilities (keys and values) specified in the US-ASCII charset and the format 'key1: value {, value }; ...… |
| 1.3.6.1.4.1.2699.1.2.1.2.1.1.4 | ScalarppmPrinterNumberOfPorts | read-only | current | The number of printer ports supported on this network printer, i.e., the number of entries in the 'ppmPortTable' below with a first index of 'ppmPrinterIndex',… |
| 1.3.6.1.4.1.2699.1.2.1.2.1.1.5 | ScalarppmPrinterPreferredPortIndex | read-only | current | The value of 'ppmPortIndex' for the preferred port for this printer (configured by vendor or site administrator), or zero if not specified. Compatibility Note:… |
| 1.3.6.1.4.1.2699.1.2.1.2.1.1.6 | ScalarppmPrinterHrDeviceIndex | read-only | current | The value of 'hrDeviceIndex' in the IETF Host Resources MIB (RFC 1514/2790), or zero if not specified. This value of 'hrDeviceIndex' MAY be used for status que… |
| 1.3.6.1.4.1.2699.1.2.1.2.1.1.7 | ScalarppmPrinterSnmpCommunityName | read-only | current | The SNMP read community name, an opaque binary string, for access to status information in IETF Host Resources MIB (RFC 1514/2790) and IETF Printer MIB (RFC 17… |
| 1.3.6.1.4.1.2699.1.2.1.2.1.1.8 | ScalarppmPrinterSnmpQueryEnabled | read-only | current | The status query mode for this printer, for queries by monitoring applications in the IETF Host Resources MIB (RFC 1514/2790) and/or IETF Printer MIB (RFC 1759… |
| 1.3.6.1.4.1.2699.1.2.1.3 | NodeppmPort | |||
| 1.3.6.1.4.1.2699.1.2.1.3.1 | NodeppmPortTable | |||
| 1.3.6.1.4.1.2699.1.2.1.3.1.1 | NodeppmPortEntry | |||
| 1.3.6.1.4.1.2699.1.2.1.3.1.1.2 | ScalarppmPortEnabled | read-only | current | The current administrative configuration mode for this port. If this object is 'false', then applications MUST NOT attempt installation of this port and SHOULD… |
| 1.3.6.1.4.1.2699.1.2.1.3.1.1.3 | ScalarppmPortName | read-only | current | A user friendly name for this port that may be used to facilitate user selection of a port on a multi-port network system, in the locale specified by 'ppmGener… |
| 1.3.6.1.4.1.2699.1.2.1.3.1.1.4 | ScalarppmPortServiceNameOrURI | read-only | current | The service name or URI for this port, specified in UTF-8 (RFC 3629), in the locale specified by 'ppmGeneralNaturalLanguage'. The service name is typically a q… |
| 1.3.6.1.4.1.2699.1.2.1.3.1.1.5 | ScalarppmPortProtocolType | read-only | current | The protocol type of this printer port, specified as a value from 'PrtChannelTypeTC' in the IANA Printer MIB (e.g., 'chLPDServer(8)' for LPR (RFC 1179) or 'chP… |
| 1.3.6.1.4.1.2699.1.2.1.3.1.1.6 | ScalarppmPortProtocolTargetPort | read-only | current | The transport (TCP, UDP, etc.) target port number for this protocol, i.e., an alternate port from the protocol default, or zero if not specified (use protocol … |
| 1.3.6.1.4.1.2699.1.2.1.3.1.1.7 | ScalarppmPortProtocolAltSourceEnabled | read-only | current | The alternate transport source port mode for this protocol. If this object is 'true', then transport source ports outside the standard range MAY be used (e.g.,… |
| 1.3.6.1.4.1.2699.1.2.1.3.1.1.8 | ScalarppmPortPrtChannelIndex | read-only | current | The value of 'prtChannelIndex' in IETF Printer MIB (RFC 1759/3805) that corresponds to this printer port, or zero if not specified. Compatibility Note: The val… |
| 1.3.6.1.4.1.2699.1.2.1.3.1.1.9 | ScalarppmPortLprByteCountEnabled | read-only | current | The current LPR byte counting mode for this port if applicable. If the value of 'ppmPortProtocolType' is NOT 'chLPDServer(8)', then monitoring applications MUS… |
| 1.3.6.1.6 | NodesnmpV2 | |||
| 1.3.6.1.6.3 | NodesnmpModules | |||
| 1.3.6.1.6.3.10 | NodesnmpFrameworkMIB | |||
| 1.3.6.1.6.3.10.2 | NodesnmpFrameworkMIBObjects | |||
| 1.3.6.1.6.3.10.2.1 | NodesnmpEngine | |||
| 1.3.6.1.6.3.10.2.1.1 | ScalarsnmpEngineID | read-only | current | An SNMP engine's administratively-unique identifier. This information SHOULD be stored in non-volatile storage so that it remains constant across re-initializa… |
| 1.3.6.1.6.3.10.2.1.2 | ScalarsnmpEngineBoots | read-only | current | The number of times that the SNMP engine has (re-)initialized itself since snmpEngineID was last configured. |
| 1.3.6.1.6.3.10.2.1.3 | ScalarsnmpEngineTime | read-only | current | The number of seconds since the value of the snmpEngineBoots object last changed. When incrementing this object's value would cause it to exceed its maximum, s… |
| 1.3.6.1.6.3.10.2.1.4 | ScalarsnmpEngineMaxMessageSize | read-only | current | The maximum length in octets of an SNMP message which this SNMP engine can send or receive and process, determined as the minimum of the maximum message size v… |
| 1.3.6.1.6.3.11 | NodesnmpMPDMIB | |||
| 1.3.6.1.6.3.11.2 | NodesnmpMPDMIBObjects | |||
| 1.3.6.1.6.3.11.2.1 | NodesnmpMPDStats | |||
| 1.3.6.1.6.3.11.2.1.1 | ScalarsnmpUnknownSecurityModels | read-only | current | The total number of packets received by the SNMP engine which were dropped because they referenced a securityModel that was not known to or supported by the SN… |
| 1.3.6.1.6.3.11.2.1.2 | ScalarsnmpInvalidMsgs | read-only | current | The total number of packets received by the SNMP engine which were dropped because there were invalid or inconsistent components in the SNMP message. |
| 1.3.6.1.6.3.11.2.1.3 | ScalarsnmpUnknownPDUHandlers | read-only | current | The total number of packets received by the SNMP engine which were dropped because the PDU contained in the packet could not be passed to an application respon… |
| 1.3.6.1.6.3.15 | NodesnmpUsmMIB | |||
| 1.3.6.1.6.3.15.1 | NodeusmMIBObjects | |||
| 1.3.6.1.6.3.15.1.1 | NodeusmStats | |||
| 1.3.6.1.6.3.15.1.1.1 | ScalarusmStatsUnsupportedSecLevels | read-only | current | The total number of packets received by the SNMP engine which were dropped because they requested a securityLevel that was unknown to the SNMP engine or otherw… |
| 1.3.6.1.6.3.15.1.1.2 | ScalarusmStatsNotInTimeWindows | read-only | current | The total number of packets received by the SNMP engine which were dropped because they appeared outside of the authoritative SNMP engine's window. |
| 1.3.6.1.6.3.15.1.1.3 | ScalarusmStatsUnknownUserNames | read-only | current | The total number of packets received by the SNMP engine which were dropped because they referenced a user that was not known to the SNMP engine. |
| 1.3.6.1.6.3.15.1.1.4 | ScalarusmStatsUnknownEngineIDs | read-only | current | The total number of packets received by the SNMP engine which were dropped because they referenced an snmpEngineID that was not known to the SNMP engine. |
| 1.3.6.1.6.3.15.1.1.5 | ScalarusmStatsWrongDigests | read-only | current | The total number of packets received by the SNMP engine which were dropped because they didn't contain the expected digest value. |
| 1.3.6.1.6.3.15.1.1.6 | ScalarusmStatsDecryptionErrors | read-only | current | The total number of packets received by the SNMP engine which were dropped because they could not be decrypted. |
| 1.3.6.1.6.3.15.1.2 | NodeusmUser | |||
| 1.3.6.1.6.3.15.1.2.1 | ScalarusmUserSpinLock | read-write | current | An advisory lock used to allow several cooperating Command Generator Applications to coordinate their use of facilities to alter secrets in the usmUserTable. |
| 1.3.6.1.6.3.15.1.2.2 | NodeusmUserTable | |||
| 1.3.6.1.6.3.15.1.2.2.1 | NodeusmUserEntry | |||
| 1.3.6.1.6.3.15.1.2.2.1.3 | ScalarusmUserSecurityName | read-only | current | A human readable string representing the user in Security Model independent format. The default transformation of the User-based Security Model dependent secur… |
| 1.3.6.1.6.3.15.1.2.2.1.4 | ScalarusmUserCloneFrom | read-create | current | A pointer to another conceptual row in this usmUserTable. The user in this other conceptual row is called the clone-from user. When a new user is created (i.e.… |
| 1.3.6.1.6.3.15.1.2.2.1.5 | ScalarusmUserAuthProtocol | read-create | current | An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be authenticated, and if so, the type … |
| 1.3.6.1.6.3.15.1.2.2.1.6 | ScalarusmUserAuthKeyChange | read-create | current | An object, which when modified, causes the secret authentication key used for messages sent on behalf of this user to/from the SNMP engine identified by usmUse… |
| 1.3.6.1.6.3.15.1.2.2.1.7 | ScalarusmUserOwnAuthKeyChange | read-create | current | Behaves exactly as usmUserAuthKeyChange, with one notable difference: in order for the set operation to succeed, the usmUserName of the operation requester mus… |
| 1.3.6.1.6.3.15.1.2.2.1.8 | ScalarusmUserPrivProtocol | read-create | current | An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be protected from disclosure, and if s… |
| 1.3.6.1.6.3.15.1.2.2.1.9 | ScalarusmUserPrivKeyChange | read-create | current | An object, which when modified, causes the secret encryption key used for messages sent on behalf of this user to/from the SNMP engine identified by usmUserEng… |
| 1.3.6.1.6.3.15.1.2.2.1.10 | ScalarusmUserOwnPrivKeyChange | read-create | current | Behaves exactly as usmUserPrivKeyChange, with one notable difference: in order for the Set operation to succeed, the usmUserName of the operation requester mus… |
| 1.3.6.1.6.3.15.1.2.2.1.11 | ScalarusmUserPublic | read-create | current | A publicly-readable value which can be written as part of the procedure for changing a user's secret authentication and/or privacy key, and later read to deter… |
| 1.3.6.1.6.3.15.1.2.2.1.12 | ScalarusmUserStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' must allow write-access at a minimum to: - usmUserAuthKeyChange, usmUser… |
| 1.3.6.1.6.3.15.1.2.2.1.13 | ScalarusmUserStatus | read-create | current | The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the us… |
| 1.3.6.1.6.3.16 | NodesnmpVacmMIB | |||
| 1.3.6.1.6.3.16.1 | NodevacmMIBObjects | |||
| 1.3.6.1.6.3.16.1.1 | NodevacmContextTable | |||
| 1.3.6.1.6.3.16.1.1.1 | NodevacmContextEntry | |||
| 1.3.6.1.6.3.16.1.1.1.1 | ScalarvacmContextName | read-only | current | A human readable name identifying a particular context at a particular SNMP entity. The empty contextName (zero length) represents the default context. |
| 1.3.6.1.6.3.16.1.2 | NodevacmSecurityToGroupTable | |||
| 1.3.6.1.6.3.16.1.2.1 | NodevacmSecurityToGroupEntry | |||
| 1.3.6.1.6.3.16.1.2.1.3 | ScalarvacmGroupName | read-create | current | The name of the group to which this entry (e.g., the combination of securityModel and securityName) belongs. This groupName is used as index into the vacmAcces… |
| 1.3.6.1.6.3.16.1.2.1.4 | ScalarvacmSecurityToGroupStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.6.3.16.1.2.1.5 | ScalarvacmSecurityToGroupStatus | read-create | current | The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the va… |
| 1.3.6.1.6.3.16.1.4 | NodevacmAccessTable | |||
| 1.3.6.1.6.3.16.1.4.1 | NodevacmAccessEntry | |||
| 1.3.6.1.6.3.16.1.4.1.4 | ScalarvacmAccessContextMatch | read-create | current | If the value of this object is exact(1), then all rows where the contextName exactly matches vacmAccessContextPrefix are selected. If the value of this object … |
| 1.3.6.1.6.3.16.1.4.1.5 | ScalarvacmAccessReadViewName | read-create | current | The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes read access. The identified MIB vie… |
| 1.3.6.1.6.3.16.1.4.1.6 | ScalarvacmAccessWriteViewName | read-create | current | The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes write access. The identified MIB vi… |
| 1.3.6.1.6.3.16.1.4.1.7 | ScalarvacmAccessNotifyViewName | read-create | current | The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes access for notifications. The ident… |
| 1.3.6.1.6.3.16.1.4.1.8 | ScalarvacmAccessStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.6.3.16.1.4.1.9 | ScalarvacmAccessStatus | read-create | current | The status of this conceptual row. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row … |
| 1.3.6.1.6.3.16.1.5 | NodevacmMIBViews | |||
| 1.3.6.1.6.3.16.1.5.1 | ScalarvacmViewSpinLock | read-write | current | An advisory lock used to allow cooperating SNMP Command Generator applications to coordinate their use of the Set operation in creating or modifying views. Whe… |
| 1.3.6.1.6.3.16.1.5.2 | NodevacmViewTreeFamilyTable | |||
| 1.3.6.1.6.3.16.1.5.2.1 | NodevacmViewTreeFamilyEntry | |||
| 1.3.6.1.6.3.16.1.5.2.1.3 | ScalarvacmViewTreeFamilyMask | read-create | current | The bit mask which, in combination with the corresponding instance of vacmViewTreeFamilySubtree, defines a family of view subtrees. Each bit of this bit mask c… |
| 1.3.6.1.6.3.16.1.5.2.1.4 | ScalarvacmViewTreeFamilyType | read-create | current | Indicates whether the corresponding instances of vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask define a family of view subtrees which is included in or … |
| 1.3.6.1.6.3.16.1.5.2.1.5 | ScalarvacmViewTreeFamilyStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.6.3.16.1.5.2.1.6 | ScalarvacmViewTreeFamilyStatus | read-create | current | The status of this conceptual row. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row … |