HUAWEI-CPE-MGMT-MIB
42 objects
CPE management MIB.The hwCpeMgmtPara table is used for managing PVC parameters. The hwCpeSelect table is used for establishing PVC and starting terminal device management.The hwCpeUpgrade table is used for software updating of terminal device.
Imported Objects
| HUAWEI-DEVICE-MIB | hwFrameIndex hwPortIndex hwSlotIndex |
| HUAWEI-LOAD-BACKUP-MIB | hwLoadFileName |
| HUAWEI-MIB | huaweiUtility |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.106 | IdentityhwCpeMgmt | CPE management MIB.The hwCpeMgmtPara table is used for managing PVC parameters. The hwCpeSelect table is used for establishing PVC and starting terminal device… | ||
| 1.3.6.1.4.1.2011.6.106.1 | NodehwCpeMgmtPara | |||
| 1.3.6.1.4.1.2011.6.106.1.1 | ScalarhwCpeMgmtIpAddr | read-write | current | IP address of CPE terminal. DSLAM uses this IP address to connect to CPE terminal. Default: 3232235777 (IP address 192.168.1.1) |
| 1.3.6.1.4.1.2011.6.106.1.2 | ScalarhwCpeMgmtVpi | read-write | current | VPI of terminal management channel. It is necessary to config VPI/VCI value when establish management channel. Default: 1 |
| 1.3.6.1.4.1.2011.6.106.1.3 | ScalarhwCpeMgmtVci | read-write | current | VCI of terminal management channel. It is necessary to config VPI/VCI value when establish management channel. Default: 39 |
| 1.3.6.1.4.1.2011.6.106.1.4 | ScalarhwCpeMgmtDslamVlan | read-write | current | VLAN ID of DSLAM's VLAN interface. It is necessary to config VLAN ID value when establish management channel. Default: 3999 |
| 1.3.6.1.4.1.2011.6.106.1.5 | ScalarhwCpeMgmtCpeVlan | read-write | current | VLAN ID of VDSL CPE's management VLAN. It is necessary to config VLAN ID value when establish management channel. Default: 4014 |
| 1.3.6.1.4.1.2011.6.106.1.6 | ScalarhwCpeMgmtFlowType | read-write | current | Flow type of VDSL CPE's management VLAN,the default value is cpevlan(1). Options: 1. cpevlan(1) - indicates that the Cpe management flow type is vlan 2. vlanet… |
| 1.3.6.1.4.1.2011.6.106.1.7 | ScalarhwCpeMgmtFlowPara | read-write | current | Flow parameter of VDSL CPE's management flow. While hwCpeMgmtFlowType equals to 1(cpevlan),this node will be invalid. While hwCpeMgmtFlowType equals to 2(vlane… |
| 1.3.6.1.4.1.2011.6.106.2 | NodehwCpeSelect | |||
| 1.3.6.1.4.1.2011.6.106.2.1 | ScalarhwCpeFrameIndex | read-write | current | Terminal's frame ID |
| 1.3.6.1.4.1.2011.6.106.2.2 | ScalarhwCpeSlotIndex | read-write | current | Terminal's slot ID |
| 1.3.6.1.4.1.2011.6.106.2.3 | ScalarhwCpePortIndex | read-write | current | Terminal's port ID,The invalid value -1 indicates that the CPE management parameter is not configured. |
| 1.3.6.1.4.1.2011.6.106.2.4 | ScalarhwCpeMgmtOper | read-write | current | Operation of terminal management. Options: 1. start(1) - terminal management start 2. stop(2) - terminal management end 3. invalid(-1) - returned to GET reques… |
| 1.3.6.1.4.1.2011.6.106.3 | NodehwCpeUpgrade | |||
| 1.3.6.1.4.1.2011.6.106.3.1 | ScalarhwCpeLoadServerIpAddr | read-write | current | Server IP address. DSLAM download files from this server. |
| 1.3.6.1.4.1.2011.6.106.3.2 | ScalarhwCpeLoadProtocol | read-write | current | Load protocol. Options: 1.tftp(1) - TFTP mode 2.ftp(2) - FTP mode 3.sftp(3) - SFTP mode 4.other(4) - Other mode 5.invalid(-1) - indicates that there is no CPE … |
| 1.3.6.1.4.1.2011.6.106.3.3 | ScalarhwCpeLoadFileName | read-write | current | Name of file to be loaded. Absolute path is needed if the file is not in the default path of FTP/TFTP server. |
| 1.3.6.1.4.1.2011.6.106.3.4 | ScalarhwCpeLoadUserName | read-write | current | User name,use to visit FTP server. User name is not needed if TFTP protocol is used. This value will be discarded if TFTP protocol is used. |
| 1.3.6.1.4.1.2011.6.106.3.5 | ScalarhwCpeLoadPassword | read-write | current | Password,use to visit FTP server. Password is not needed if TFTP protocol is used. This value will be discarded if TFTP protocol is used. |
| 1.3.6.1.4.1.2011.6.106.3.6 | ScalarhwCpeLoadAdminStatus | read-write | current | Load operation. Options: 1.start(1) - Start loading operation 2.stop(2) - Stop loading operation 3.invalid(-1) - is returned to GET request. NMS start update f… |
| 1.3.6.1.4.1.2011.6.106.3.7 | ScalarhwCpeLoadOperStatus | read-only | current | Load result. Options: 1.noLoadOperation(1) - No load operation 2.ready(2) - Wait to load 3.getingToDslam(3) - Geting to dslam 4.puttingToCpe(4) - Putting to cp… |
| 1.3.6.1.4.1.2011.6.106.3.8 | ScalarhwCpeLoadFileType | read-write | current | File Type. Options: 1.image(1) - software of CPE 2.cfgfile(2) - configuration file 3.otherfile(3) - other file |
| 1.3.6.1.4.1.2011.6.106.3.9 | ScalarhwCpeLoadServerPort | read-write | current | Cpe load server port in SFTP mode Default: 22 (SFTP's well-known port) |
| 1.3.6.1.4.1.2011.6.106.4 | TablehwBatchCpeSelectTable | not-accessible | current | Cpe Batch Management table(the max record number is 1024). The indexes of this table are hwBatchCpeFrameIndex,hwBatchCpeSlotIndex,hwBatchCpePortIndex and hwBat… |
| 1.3.6.1.4.1.2011.6.106.4.1 | RowhwBatchCpeSelectEntry | not-accessible | current | Cpe Batch Management table(the max record number is 1024). The indexes of this entry are hwBatchCpeFrameIndex,hwBatchCpeSlotIndex,hwBatchCpePortIndex and hwBat… |
| 1.3.6.1.4.1.2011.6.106.4.1.1 | ColumnhwBatchCpeFrameIndex | not-accessible | current | ID of the shelf to which the terminal is connected |
| 1.3.6.1.4.1.2011.6.106.4.1.2 | ColumnhwBatchCpeSlotIndex | not-accessible | current | ID of the slot to which the terminal is connected |
| 1.3.6.1.4.1.2011.6.106.4.1.3 | ColumnhwBatchCpePortIndex | not-accessible | current | ID of the port to which the terminal is connected |
| 1.3.6.1.4.1.2011.6.106.4.1.4 | ColumnhwBatchCpeid | not-accessible | current | Terminal ID such as ONT ID (0-63) |
| 1.3.6.1.4.1.2011.6.106.4.1.5 | ColumnhwBatchCpeAdminStatus | read-only | current | Current loading status of the terminal You can query this leaf, through the NMS, to learn the current loading status of a terminal. Loading result. Options: 1.… |
| 1.3.6.1.4.1.2011.6.106.4.1.6 | ColumnhwBatchCpeRowStatus | read-write | current | Terminal management. Options: 1. createAndGo(4) -Add this terminal to the sequence of terminals to be loaded 2. delete(6) -Remove this terminal from the sequen… |
| 1.3.6.1.4.1.2011.6.106.4.1.7 | ColumnhwBatchCpeLoadProgress | read-only | current | display ont load progress |
| 1.3.6.1.4.1.2011.6.106.5 | NodehwCpeTraps | |||
| 1.3.6.1.4.1.2011.6.106.5.1 | NodehwCpeTrapVbOids | |||
| 1.3.6.1.4.1.2011.6.106.5.1.1 | ScalarhwCpeLoadstate | accessible-for-notify | current | CPE load result. Options: 1. cpedownloadfail(1) - down load operation failed 2. cpeuploadfail(2) - up load operation failed 3. cpeloadsucceed(3) - load operati… |
| 1.3.6.1.4.1.2011.6.106.5.1.2 | ScalarhwCpeTelstate | accessible-for-notify | current | CPE telnet result. Options: 1.cpetelfail(1) - telnet operation failed 2.cpetelstop(2) - telnet operation stopped 3.cpetelpvcoccupied(3) - telnet pvc occupied w… |
| 1.3.6.1.4.1.2011.6.106.5.2 | NodehwCpeCommonTraps | |||
| 1.3.6.1.4.1.2011.6.106.5.2.0 | NodehwCpeCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.106.5.2.0.1 | NotificationhwCpeLoadStateTrap | current | This trap will send when CPE load operation is finished. CPE load result from the cpe terminal. | |
| 1.3.6.1.4.1.2011.6.106.5.2.0.2 | NotificationhwCpeTelStateTrap | current | This trap will send when telnet operation on CPE processed. CPE telnet result from the CPE terminal. | |
| 1.3.6.1.4.1.2011.6.106.5.3 | NodehwCpeAlarmTraps |