HUAWEI-MNGT-MIB
105 objects
The MIB object implements the management of the CLI and NE users.
Imported Objects
| HUAWEI-DEVICE-MIB | hwConfigLockState hwDev |
| HUAWEI-MIB | huaweiUtility |
| HUAWEI-SNMP-NOTIFICATION-MIB | hwLogSynType |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.3.10 | IdentityhwCliUserMgmt | not-accessible | The MIB object implements the management of the CLI and NE users. | |
| 1.3.6.1.4.1.2011.6.3.10.1 | TablehwCliUserParaTable | not-accessible | current | User parameter configuration table, which supports the functions of querying, adding, deleting and modifying a user. The index of this table is hwCliUserName. |
| 1.3.6.1.4.1.2011.6.3.10.1.1 | RowhwCliUserParaEntry | not-accessible | current | User parameter configuration table, which supports the functions of querying, adding, deleting and modifying a user. The index of this entry is hwCliUserName. |
| 1.3.6.1.4.1.2011.6.3.10.1.1.1 | ColumnhwCliUserName | accessible-for-notify | current | Name of the CLI user. The user name is case insensitive and the user name consists of 6-15 characters. The minimum length of the name can be configured by user… |
| 1.3.6.1.4.1.2011.6.3.10.1.1.2 | ColumnhwCliUserPassword | read-create | current | Password of the CLI user. The user can directly modify the password of the CLI user and need not verify the original password of the CLI user. The user passwor… |
| 1.3.6.1.4.1.2011.6.3.10.1.1.3 | ColumnhwCliUserLevel | read-create | current | The levels of CLI users. Options: 1. common(1) -indicates the common user. 2. operator(2) -indicates the operator. 3. administrator(3) -indicates the administr… |
| 1.3.6.1.4.1.2011.6.3.10.1.1.4 | ColumnhwCliUserLogins | read-create | current | The number of user login attempts in one time. The same user name can be used for login to the device repeatedly. For example, when two users log in to the dev… |
| 1.3.6.1.4.1.2011.6.3.10.1.1.5 | ColumnhwCliUserDecr | read-create | current | Description of CLI user. You can add the basic information about the user, such as the email box, telephone number, or other contact information. |
| 1.3.6.1.4.1.2011.6.3.10.1.1.6 | ColumnhwCliUserRowStatus | read-create | current | Operation status of CLI user, the CLI user can be added, deleted and modified. The user level, number of times of re-login, user profile, available user passwo… |
| 1.3.6.1.4.1.2011.6.3.10.1.1.7 | ColumnhwCliUserprofile | read-create | current | The name of user profile that CLI user belongs to. |
| 1.3.6.1.4.1.2011.6.3.10.1.1.8 | ColumnhwCliUserAccessType | read-create | current | The user can log in to the device through the following three modes. Options: 1. cli(1) -indicates CLI terminal. 2. oss(2) -indicates OSS terminal. 3. web(4) -… |
| 1.3.6.1.4.1.2011.6.3.10.1.1.9 | ColumnhwCliUserTimeout | read-create | obsolete | This object is not used any longer. Login timeout duration of the user. If the CLI user performs no operation during a period, the user automatically quits the… |
| 1.3.6.1.4.1.2011.6.3.10.1.1.10 | ColumnhwCliUserNameLastDays | read-only | current | Service life of the user name. The hwCliUserNameLastDays value of -1 indicates the username expired. |
| 1.3.6.1.4.1.2011.6.3.10.1.1.11 | ColumnhwCliUserPwdLastDays | read-only | current | Service life of the user password. The hwCliUserPwdLastDays value of -1 indicates the user password expired. |
| 1.3.6.1.4.1.2011.6.3.10.2 | TablehwCliClientTable | not-accessible | current | CLI online user information table, which can be used to force an online user to go offline. The table cannot be created and deleted. The table supports only th… |
| 1.3.6.1.4.1.2011.6.3.10.2.1 | RowhwCliClientEntry | not-accessible | current | CLI online user information table, which can be used to force an online user to go offline. The table cannot be created and deleted. The table supports only th… |
| 1.3.6.1.4.1.2011.6.3.10.2.1.1 | ColumnhwCliClientID | not-accessible | current | Client ID(1..255). Index object, this ID is allocated by device. Value 255 indicates that the device does not allocate client IDs. |
| 1.3.6.1.4.1.2011.6.3.10.2.1.2 | ColumnhwCliClientUserName | read-only | current | User name of client. |
| 1.3.6.1.4.1.2011.6.3.10.2.1.3 | ColumnhwCliClientType | read-only | current | Type of client. The modes of login to the client are as follows: Options: 1. serial(1) -indicates serial port. 2. telnet(2) -indicates telnet. 3. proxy(3) -ind… |
| 1.3.6.1.4.1.2011.6.3.10.2.1.4 | ColumnhwCliClientIp | read-only | current | The IP address of client. |
| 1.3.6.1.4.1.2011.6.3.10.2.1.5 | ColumnhwCliClientLoginTime | read-only | current | The login time of client. |
| 1.3.6.1.4.1.2011.6.3.10.2.1.6 | ColumnhwCliClientAdminStatus | read-write | current | Admin status of client, can disconnect client. Options: 1. disconnect(1) -indicates the user who logs in to the system in the modes except serial port mode can… |
| 1.3.6.1.4.1.2011.6.3.10.2.1.7 | ColumnhwCliUserIdleTimeOut | read-write | current | This object is not used any longer.Idleness timeout duration of the online user. When the online user is idle for a period longer than the preset time, the onl… |
| 1.3.6.1.4.1.2011.6.3.10.3 | NodehwCliSysCmdTable | |||
| 1.3.6.1.4.1.2011.6.3.10.3.2 | ScalarhwCliUserManualUnlock | read-write | current | Unlock users manually. Enter the user name to unlock the user. |
| 1.3.6.1.4.1.2011.6.3.10.3.3 | ScalarhwCliUserDeclarSwitch | read-write | current | The object specifies whether show the declaration after users login successfully. Options: 1. show(1) -indicates that show the declaration after users login su… |
| 1.3.6.1.4.1.2011.6.3.10.3.4 | ScalarhwCliIPManualUnlock | read-write | current | Unlock IP manually. Enter the IP address of the user to unlock the user who uses the IP address to log in to the device. |
| 1.3.6.1.4.1.2011.6.3.10.4 | ScalarhwTelnetMaxSessionNum | read-write | current | The max number of simultaneous telnet sessions. This object is used to set the maximum number of users who can log in to the system through telnet at a time. I… |
| 1.3.6.1.4.1.2011.6.3.10.5 | TablehwCliUserProfileParaTable | not-accessible | current | User profile management table, which is used to query, modify, add and delete the user profile. The user profile is a set of public user attributes, including … |
| 1.3.6.1.4.1.2011.6.3.10.5.1 | RowhwCliUserProfileParaEntry | not-accessible | current | User profile management table, which is used to query, modify, add and delete the user profile. The user profile is a set of public user attributes, including … |
| 1.3.6.1.4.1.2011.6.3.10.5.1.1 | ColumnhwCliUserProfileName | not-accessible | current | The name of the user profile. The name of the new profile must be different from the names of the system profiles. The profile name consists of 1-15 characters. |
| 1.3.6.1.4.1.2011.6.3.10.5.1.4 | ColumnhwCliUserNameAvailableInterval | read-create | current | Validity period of user name. For example, if the validity period of the user name is 10, it indicates that the user name cannot be used for login after ten da… |
| 1.3.6.1.4.1.2011.6.3.10.5.1.5 | ColumnhwCliUserPwdAvailableInterval | read-create | current | Validity period of user password. For example, if the validity period of the user password is 10, it indicates that the user password cannot be used for login … |
| 1.3.6.1.4.1.2011.6.3.10.5.1.6 | ColumnhwCliUserLoginTime | read-create | current | Permitted earliest time of login. The user can log in to the system at any time between 00:00 and 23:59. |
| 1.3.6.1.4.1.2011.6.3.10.5.1.7 | ColumnhwCliUserLogoutTime | read-create | current | Permitted latest time of login. The user can log in to the system at the time from the permitted earliest time to the permitted latest time. In other periods, … |
| 1.3.6.1.4.1.2011.6.3.10.5.1.10 | ColumnhwCliUserProfileRowStatus | read-create | current | This object is used to operate the user profile. The system profile cannot be modified or deleted. When a user is bound with the user profile, the user profile… |
| 1.3.6.1.4.1.2011.6.3.10.6 | NodehwCliSysPara | |||
| 1.3.6.1.4.1.2011.6.3.10.6.1 | ScalarhwCliSyslockInterval | read-write | current | The time interval of user locked. When the number of times of login failure reaches the preset value for locking, the user is locked. This object is used to qu… |
| 1.3.6.1.4.1.2011.6.3.10.6.2 | ScalarhwCliSyslockCondition | read-write | current | The times of login failure. This object is used to query and set the times of login failure. When the number of login failure reaches the preset value, the use… |
| 1.3.6.1.4.1.2011.6.3.10.6.3 | ScalarhwCliSysLoginModifyPwd | read-write | current | The flag of whether the password need to be changed in the case of first login. Options: 1. enable(1) -indicates that the password needs to be changed for the … |
| 1.3.6.1.4.1.2011.6.3.10.6.4 | ScalarhwCliSysLockType | read-write | current | Lock type. When the number of times of repeated login failure exceeds the preset value, the system automatically locks the user. This object is used to set the… |
| 1.3.6.1.4.1.2011.6.3.10.6.5 | ScalarhwCliSysSecurityMode | read-write | current | The object specifies whether security mode is enable. Options: 1. enable(1) -indicates that the security administrator, whose name is security, can log in to t… |
| 1.3.6.1.4.1.2011.6.3.10.6.6 | ScalarhwCliAuthenDefaultDomainName | read-write | current | Domain name in the AAA authentication mode. When the value is null, it indicates that the authentication mode is local mode. If the AAA authentication mode is … |
| 1.3.6.1.4.1.2011.6.3.10.6.7 | ScalarhwCliSysUnlockType | read-only | current | Unlock type. When a user is unlocked manually using commands or the preset locking criteria times out, the system generates an unlock event. This object is use… |
| 1.3.6.1.4.1.2011.6.3.10.7 | TablehwSNMPUserTable | not-accessible | current | NMS user management table, which supports the login and logout of the NMS user and the function of querying the information about the online NMS user. The inde… |
| 1.3.6.1.4.1.2011.6.3.10.7.1 | RowhwSNMPUserEntry | not-accessible | current | NMS user management table, which supports the login and logout of the NMS user and the function of querying the information about the online NMS user. The inde… |
| 1.3.6.1.4.1.2011.6.3.10.7.1.1 | ColumnhwSNMPUserID | not-accessible | current | SNMP user ID(1..8) and index object. The value that the device returns to the NMS, which uniquely identifies a user. |
| 1.3.6.1.4.1.2011.6.3.10.7.1.2 | ColumnhwSNMPUserName | read-write | current | Name of the SNMP user. |
| 1.3.6.1.4.1.2011.6.3.10.7.1.3 | ColumnhwSNMPUserAdminStatus | read-write | current | SNMP user admin status(1:logon,2:logoff). Visual local craft terminal (LCT). Options: 1. logon(1) -indicates that the user can be set to go online. 2. logoff(2… |
| 1.3.6.1.4.1.2011.6.3.10.7.1.4 | ColumnhwSNMPUserType | read-write | current | SNMP user type(1:lct). Options: 1.lct(1) -indicates that visual LCT, which is an NMS user type. |
| 1.3.6.1.4.1.2011.6.3.10.7.1.5 | ColumnhwSNMPUserIP | read-only | current | IP address that SNMP user use. |
| 1.3.6.1.4.1.2011.6.3.10.8 | NodehwMngtUserAlarmTrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.3.10.8.1 | ScalarhwUserAdminStatus | accessible-for-notify | current | The Status of the user login. Options: 1. logon(0) -indicates that the user goes online. 2. logoff(1) -indicates that the user goes offline. 3. logonfail(2) -i… |
| 1.3.6.1.4.1.2011.6.3.10.8.2 | ScalarhwUserLogMode | accessible-for-notify | current | The modes of login to the client. Options: 1. serial(0) -serial mode. 2. clipry(1) -clipry mode. 3. telnet(2) -telnet mode. 4. ssh(3) -ssh mode. 5. web(4) -web… |
| 1.3.6.1.4.1.2011.6.3.10.8.3 | ScalarhwUserLogType | accessible-for-notify | current | Types of the user log. Currently, the logs are classified into two types. Options: 1. operating(0) -indicates the operating log. 2. security(1) -indicates the … |
| 1.3.6.1.4.1.2011.6.3.10.8.4 | ScalarhwCliSysOldUserLevel | accessible-for-notify | current | The levels of CLI users. Options: 1. common(1) -indicates the common user. 2. operator(2) -indicates the operator. 3. administrator(3) -indicates the administr… |
| 1.3.6.1.4.1.2011.6.3.10.8.5 | ScalarhwCliSysNewUserLevel | accessible-for-notify | current | The levels of CLI users after modification. Options: 1. common(1) -indicates the common user. 2. operator(2) -indicates the operator. 3. administrator(3) -indi… |
| 1.3.6.1.4.1.2011.6.3.10.8.6 | ScalarhwCliOnlineUserNum | accessible-for-notify | current | The number of online users. |
| 1.3.6.1.4.1.2011.6.3.10.9 | NodehwMngtUserTraps | |||
| 1.3.6.1.4.1.2011.6.3.10.9.1 | NodehwMngtUserCommonTraps | |||
| 1.3.6.1.4.1.2011.6.3.10.9.1.0 | NodehwMngtUserCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.3.10.9.1.0.1 | NotificationhwMngtUserLogonStateTrap | current | This trap message is reported when the user login or logoff. | |
| 1.3.6.1.4.1.2011.6.3.10.9.2 | NodehwMngtUserAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.3.10.9.2.0 | NodehwMngtUserAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.3.10.9.2.0.1 | NotificationhwUserLogWillFullTrap | current | This trap message is reported when the system log database will be full. | |
| 1.3.6.1.4.1.2011.6.3.10.9.2.0.2 | NotificationhwMngtUserLockedTrap | current | This trap message is reported when the managing user of the equipment is locked. | |
| 1.3.6.1.4.1.2011.6.3.10.9.2.0.3 | NotificationhwMngtUserStateChangeTrap | current | This trap message is reported when the maintenance user's state changes. | |
| 1.3.6.1.4.1.2011.6.3.10.9.2.0.4 | NotificationhwMngtUserNameWillExpireTrap | current | This trap message is reported when the user name will expire soon. | |
| 1.3.6.1.4.1.2011.6.3.10.9.2.0.5 | NotificationhwMngtUserPasswordWillExpireTrap | current | This trap message is reported when the user password will expire soon. | |
| 1.3.6.1.4.1.2011.6.3.10.9.2.0.6 | NotificationhwUserPasswordFaultTrap | current | This trap is sent when the default password for user root is not changed. | |
| 1.3.6.1.4.1.2011.6.3.10.9.2.0.7 | NotificationhwUserPasswordRestoreTrap | current | This trap is sent when the default password for user root is changed. | |
| 1.3.6.1.4.1.2011.6.3.10.9.2.0.8 | NotificationhwMngtUserUnlockedTrap | current | This trap message is reported when the managing user of the equipment is unlocked. | |
| 1.3.6.1.4.1.2011.6.3.10.9.2.0.9 | NotificationhwMngtUserModifyAuthTrap | current | This trap message is reported when the managing user change the permissions . | |
| 1.3.6.1.4.1.2011.6.3.10.9.2.0.10 | NotificationhwConfigLockStateTrap | current | This trap message is reported when user change the config lock state. | |
| 1.3.6.1.4.1.2011.6.3.10.10 | NodehwCliConsolePara | |||
| 1.3.6.1.4.1.2011.6.3.10.10.1 | ScalarhwCliConsoleSwitch | read-write | current | Enable/disable management serial port. Options: 1. enable(1) -indicates that the serial port is in the open state and the serial port is available. 2. disable(… |
| 1.3.6.1.4.1.2011.6.3.10.11 | NodehwModemCallbackMngt | |||
| 1.3.6.1.4.1.2011.6.3.10.11.1 | ScalarhwModemCallbackSwitch | read-write | current | The object specifies whether callback function is enable. Options: 1. enable(1) -indicates that the callback function is enable. 2. disable(2) -indicates that … |
| 1.3.6.1.4.1.2011.6.3.10.11.2 | TablehwModemCallbackMngtTable | not-accessible | current | The callback security configuration table. This table is used to manage the callback telephone numbers and passwords. The index of this table is hwModemCallbac… |
| 1.3.6.1.4.1.2011.6.3.10.11.2.1 | RowhwModemCallbackMngtEntry | not-accessible | current | The callback security configuration table. This table is used to manage the callback telephone numbers and passwords. The index of this entry is hwModemCallbac… |
| 1.3.6.1.4.1.2011.6.3.10.11.2.1.1 | ColumnhwModemTelNumber | not-accessible | current | Telephone number |
| 1.3.6.1.4.1.2011.6.3.10.11.2.1.2 | ColumnhwModemPassword | read-write | current | User password. The password must be cipher encrypted by MD5, it consists of 16 characters. |
| 1.3.6.1.4.1.2011.6.3.10.11.2.1.3 | ColumnhwModemCallbackRowStatus | read-create | current | Operation user configration of the modem callback function, the user configration can be added and deleted. The user telephone number and password must be boun… |
| 1.3.6.1.4.1.2011.6.3.12 | NodehwSysManFirewall | |||
| 1.3.6.1.4.1.2011.6.3.12.1 | TablehwFirewallSwitchTable | not-accessible | current | Firewall switch table, which supports the functions of querying, enabling and disabling the protocol-type firewall switch. The index of this table is hwFirewal… |
| 1.3.6.1.4.1.2011.6.3.12.1.1 | RowhwFirewallSwitchEntry | not-accessible | current | Firewall switch table, which supports the functions of querying, enabling and disabling the protocol-type firewall switch. The index of this entry is hwFirewal… |
| 1.3.6.1.4.1.2011.6.3.12.1.1.1 | ColumnhwFirewallProtocolType | not-accessible | current | Index object, index of the hwFirewallSwitchTable object. Options: 1.telnet(1) -indicates that the firewall protocols is telnet. 2.ssh(2) -indicates that the fi… |
| 1.3.6.1.4.1.2011.6.3.12.1.1.2 | ColumnhwFirewallSwitch | read-write | current | Firewall switch. Options: 1. enable(1) -indicates that when the device needs to control the protocol used to access the device, this command can be executed to… |
| 1.3.6.1.4.1.2011.6.3.12.2 | TablehwAccessIpTable | not-accessible | current | Access IP table, which supports the functions of querying, adding and deleting the access IP table of a specified protocol. The access IP table is used to conf… |
| 1.3.6.1.4.1.2011.6.3.12.2.1 | RowhwAccessIpEntry | not-accessible | current | Access IP table, which supports the functions of querying, adding and deleting the access IP table of a specified protocol. The access IP table is used to conf… |
| 1.3.6.1.4.1.2011.6.3.12.2.1.1 | ColumnhwAccessIpStartAddr | not-accessible | current | Start IP address of one record in access Ip table. The IP address in the new record of the table must be valid, that is, the IP address is not a class 0 addres… |
| 1.3.6.1.4.1.2011.6.3.12.2.1.2 | ColumnhwAccessIpEndAddr | read-create | current | End IP address of one record in access Ip table. The new IP address must be valid, that is, the IP address is not a class 0 address or class D address. The rec… |
| 1.3.6.1.4.1.2011.6.3.12.2.1.3 | ColumnhwAccessIpRowStatus | read-create | current | Operation status of row. The specified protocol type and the start and end addresses in the start address permitting table can be modified. createAndGo(4) is s… |
| 1.3.6.1.4.1.2011.6.3.12.3 | TablehwRefuseIpTable | not-accessible | current | Refuse IP table. The table is used to configure the address segment (under a specified protocol) with which the user cannot access the device. This can prevent… |
| 1.3.6.1.4.1.2011.6.3.12.3.1 | RowhwRefuseIpEntry | not-accessible | current | Refuse IP table. The table is used to configure the address segment (under a specified protocol) with which the user cannot access the device. This can prevent… |
| 1.3.6.1.4.1.2011.6.3.12.3.1.1 | ColumnhwRefuseIpStartAddr | not-accessible | current | Start IP address of one record in refuse Ip table. The IP address in the new record of the table must be valid, that is, the IP address is neither a class 0 ad… |
| 1.3.6.1.4.1.2011.6.3.12.3.1.2 | ColumnhwRefuseIpEndAddr | read-create | current | End IP address of one record in refuse Ip table. The IP address in the new record of the table must be valid, that is, the IP address is not a class 0 address … |
| 1.3.6.1.4.1.2011.6.3.12.3.1.3 | ColumnhwRefuseIpRowStatus | read-create | current | Operation status of row. The specified protocol type and the start and end addresses in the start address rejecting table can be modified. createAndGo(4) is su… |
| 1.3.6.1.4.1.2011.6.3.19 | NodehwSysManSourceInterface | |||
| 1.3.6.1.4.1.2011.6.3.19.1 | TablehwSysManSourceInterfaceTable | not-accessible | current | Sysman source interface table. The table is used to configure the source interfaces under the protocols such as SNMP trap, TFTP, FTP, SFTP, Telnet, Ping and Tr… |
| 1.3.6.1.4.1.2011.6.3.19.1.1 | RowhwSysManSourceInterfaceEntry | not-accessible | current | Sysman source interface table. The table is used to configure the source interfaces under the protocols such as SNMP trap, TFTP, FTP, SFTP, Telnet, Ping and Tr… |
| 1.3.6.1.4.1.2011.6.3.19.1.1.1 | ColumnhwSysManProtocolType | read-only | current | Application-layer packet type. Options: 1. trap(1) -indicates the trap packet. 2. syslog(2) -indicates the syslog packet. 3. tftp(3) -indicates the tftp packet… |
| 1.3.6.1.4.1.2011.6.3.19.1.1.2 | ColumnhwSourceInterfaceType | read-write | current | Source interface type, which is used with the interface number to determine the interface from which packets are sent. Options: 1. auto(1) -indicates the funct… |
| 1.3.6.1.4.1.2011.6.3.19.1.1.3 | ColumnhwSourceInterfaceNumber | read-write | current | Source interface number, which is the interface number under the source interface type object and is used with the interface type to determine the interface fr… |
| 1.3.6.1.4.1.2011.6.3.19.1.1.4 | ColumnhwSourceInterfaceIPAddress | read-write | current | Source interface ip address, which is the ip address set by user directly for the the source interface type object. Currently this node is only used for tftp-p… |