HUAWEI-NTEST-MIB
470 objects
This mib is used for defining the voip test MIB objects.
Imported Objects
| HUAWEI-COMMTEST-MIB | hwTestGroupNo |
| HUAWEI-DEVICE-MIB | hwFrameIndex |
| HUAWEI-MIB | huaweiUtility |
| IF-MIB | ifIndex |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.21 | NodehwTest | |||
| 1.3.6.1.4.1.2011.6.21.2 | IdentityhwNTest | This mib is used for defining the voip test MIB objects. | ||
| 1.3.6.1.4.1.2011.6.21.2.1 | NodehwNTestMib | |||
| 1.3.6.1.4.1.2011.6.21.2.1.1 | NodehwNTestMIBObjects | |||
| 1.3.6.1.4.1.2011.6.21.2.1.1.1 | TablehwPstnCircuitTestOprTable | not-accessible | current | Operation table for the PSTN subscriber circuit test: It realizes the function of the circuit test for analog subscribers in the system. The circuit test helps… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1 | RowhwPstnCircuitTestOprEntry | not-accessible | current | Operation table for the PSTN subscriber circuit test: It realizes the function of the circuit test for analog subscribers in the system. The circuit test helps… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.1 | ColumnhwPstnCircuitTestOprType | read-create | current | Describes the Circuit test-Operation Type. Options: 1. stop(1) -stop the test 2. start(2) -start the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.2 | ColumnhwPstnCircuitTestOffHook | read-create | current | Describes the Circuit test-Off hook. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.3 | ColumnhwPstnCircuitTestOffHookCount | read-create | current | Circuit test-Off hook count |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.4 | ColumnhwPstnCircuitTestDialTone | read-create | current | Describes the Circuit test-Dial tone. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.5 | ColumnhwPstnCircuitTestReceivePulse | read-create | current | Describes the Circuit test-Receiving pulse. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.6 | ColumnhwPstnCircuitTestReceiveDTMF | read-create | current | Describes the Circuit test-Receiving DTMF. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.7 | ColumnhwPstnCircuitTestRingBackTone | read-create | current | Describes the Circuit test-Ring back tone. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.8 | ColumnhwPstnCircuitTestBusyTone | read-create | current | Describes the Circuit test-Busy tone. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.9 | ColumnhwPstnCircuitTestBatteryFeed | read-create | current | Describes the Circuit test-Feeder . Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.10 | ColumnhwPstnCircuitTestPoleDetect | read-create | current | Describes the Circuit test-Polarity reversal. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.11 | ColumnhwPstnCircuitTestOnHook | read-create | current | Describes the Circuit test-On hook. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.12 | ColumnhwPstnCircuitTestRing | read-create | current | Describes the Circuit test-Ringing. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.13 | ColumnhwPstnCircuitTestStopRing | read-create | current | Describes the Circuit test-Stop ringing. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.14 | ColumnhwPstnCircuitTestFeedV | read-create | current | Describes the Circuit test-Feeder voltage. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.15 | ColumnhwPstnCircuitTestRingV | read-create | current | Describes the Circuit test-Ringing current voltage. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.16 | ColumnhwPstnCircuitTestBusyProcFlag | read-create | current | Describes the Circuit test-Busy control. Options: 1. busynotest(1) -indicates no test when busy 2. busytest(2) -indicates remedy test when busy 3. busystrentes… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.17 | ColumnhwPstnCircuitTestStatus | read-only | current | Describes the Circuit test-Inline Test Status. Options: 1. normal(1) -indicates normal 2. testfail(2) -indicates abnormal 3. portbusy(3) -indicates busy port 4… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.18 | ColumnhwPstnCircuitTestOffHookResult | read-only | current | Describes the Circuit Test Result-Off hook. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal 3. testouttime(3) -indicates time out 4.… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.19 | ColumnhwPstnCircuitTestDialToneResult | read-only | current | Describes the Circuit Test Result-dial tone. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal 3. testouttime(3) -indicates time out 4… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.20 | ColumnhwPstnCircuitTestReceivePulseResult | read-only | current | Describes the Circuit Test Result-Receiving pulse. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal 3. testouttime(3) -indicates time… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.21 | ColumnhwPstnCircuitTestReceiveDTMFResult | read-only | current | Describes the Circuit Test Result-Receiving DTMF. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal 3. testouttime(3) -indicates time … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.22 | ColumnhwPstnCircuitTestRingBackResult | read-only | current | Describes the Circuit Test Result-Ring back tone. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal 3. testouttime(3) -indicates time … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.23 | ColumnhwPstnCircuitTestBusyToneResult | read-only | current | Describes the Circuit Test Result-Busy tone. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal 3. testouttime(3) -indicates time out 4… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.24 | ColumnhwPstnCircuitTestBatteryFeedResult | read-only | current | Describes the Circuit Test Result-Feeder. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal 3. testouttime(3) -indicates time out 4. n… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.25 | ColumnhwPstnCircuitTestPoleDetectResult | read-only | current | Describes the Circuit Test Result-Polarity reversal. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal 3. testouttime(3) -indicates ti… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.26 | ColumnhwPstnCircuitTestOnHookResult | read-only | current | Describes the Circuit Test Result-On hook. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal 3. testouttime(3) -indicates time out 4. … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.27 | ColumnhwPstnCircuitTestRingResult | read-only | current | Describes the Circuit Test Result-Ringing. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal 3. testouttime(3) -indicates time out 4. … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.28 | ColumnhwPstnCircuitTestStopRingResult | read-only | current | Describes the Circuit Test Result-Stop ringing. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal 3. testouttime(3) -indicates time ou… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.29 | ColumnhwPstnCircuitTestFeedVValue | read-only | current | Describes the Circuit Test Result-Feeder voltage. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.30 | ColumnhwPstnCircuitTestFeedVResult | read-only | current | Describes the Circuit Test Result-Feeder voltage Result. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.31 | ColumnhwPstnCircuitTestRingVValue | read-only | current | Describes the Circuit Test Result-Ringing current voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.32 | ColumnhwPstnCircuitTestRingVResult | read-only | current | Describes the Circuit Test Result-Ringing current voltage Result. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.33 | ColumnhwPstnCircuitTestLoopCurrentValue | read-only | current | Describes the Circuit Test Result-Loop current. Unit: microampere, ab. uA |
| 1.3.6.1.4.1.2011.6.21.2.1.1.1.1.34 | ColumnhwPstnCircuitTestLoopCurrentResult | read-only | current | Describes the Circuit Test Result-Loop current Result. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2 | TablehwIsdnUserInTestOprTable | not-accessible | current | Describes the Operation table for the ISDN subscriber circuit test: It realizes the function of the circuit test for ISDN subscribers in the system. In the cir… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1 | RowhwIsdnUserInTestOprEntry | not-accessible | current | Describes the Operation table for the ISDN subscriber circuit test: It realizes the function of the circuit test for ISDN subscribers in the system. In the cir… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.1 | ColumnhwIsdnUserInTestOprType | read-create | current | Describes the Operation type. Options: 1. stop(1) -stop the test 2. start(2) -start the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.2 | ColumnhwIsdnUserInTestActive | read-create | current | Describes the ISDN subscriber circuit test-Active. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.3 | ColumnhwIsdnUserInTestDeactive | read-create | current | Describes the ISDN circuit test-Deactive. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.4 | ColumnhwIsdnUserInTestLtSupplyPowerVol | read-create | current | Describes the ISDN circuit test-LT supply power. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.5 | ColumnhwIsdnUserInTestLtCurrentProctect | read-create | current | Describes the ISDN circuit test-LT power supply overflow auto protection . Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.6 | ColumnhwIsdnUserInTestCutLineVol | read-create | current | Describes the ISDN circuit test-Manual switch-off line feeding voltage. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.7 | ColumnhwIsdnUserInTestSwitchOnVol | read-create | current | Describes the ISDN circuit test-Manual switch-on line feeding voltage . Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.8 | ColumnhwIsdnUserInTestBusyProcFlag | read-create | current | Describes the Busy control flag . Options: 1. busynotest(1) -no test when busy 2. busytest(2) -remedy test when busy 3. busystrentest(3) -forced test on busy |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.9 | ColumnhwIsdnUserInTestStatus | read-only | current | Describes the Test status . Options: 1. normal(1) -indicates normal 2. abnormal(2) -indicates abnormal 3. portbusy(3) -indicates busy port 4. outoftime(4) -ind… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.10 | ColumnhwIsdnUserInTestActiveResult | read-only | current | Describes the Activation result . Options: 1. normal(1) -indicates normal 2. abnormal(2) -indicates abnormal 3. outOfTime(3) -indicates timed-out 4. notest(4) … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.11 | ColumnhwIsdnUserInTestDeactiveResult | read-only | current | Describes the Deactivation result. Options: 1. normal(1) -indicates normal 2. abnormal(2) -indicates abnormal 3. outoftime(3) -indicates timed-out 4. notest(4)… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.12 | ColumnhwIsdnUserInTestLtSupplyPowerCap | read-only | current | LT power supply voltage Unit: millivolt |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.13 | ColumnhwIsdnUserInTestLtSupplyPowerCapResult | read-only | current | Describes the Test result-LT power supply voltage. Options: 1. normal(1) -indicates normal 2. abnormal(2) -indicates abnormal 3. outOfTime(3) -indicates timed-… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.14 | ColumnhwIsdnUserInTestLtCurrentProctectResult | read-only | current | Describes the LT over current auto-protection capability . Options: 1. outOfTime(1) -indicates timed-out 2. noProtect(2) -indicates not protected 3. protectNoR… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.15 | ColumnhwIsdnUserInTestCutLineVolVal | read-only | current | Describes the Manual switch-off line feeding voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.16 | ColumnhwIsdnUserInTestCutLineVolResult | read-only | current | Describes the Test result-Manual switch-off line feeding voltage. Options: 1. normal(1) -indicates normal 2. abnormal(2) -indicates abnormal 3. outOfTime(3) -i… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.17 | ColumnhwIsdnUserInTestSwitchOnVolVal | read-only | current | Describes the Switch on voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.2.1.18 | ColumnhwIsdnUserInTestSwitchOnVolResult | read-only | current | Describes the Test result-switch on voltage. Options: 1. normal(1) -indicates normal 2. abnormal(2) -indicates abnormal 3. outOfTime(3) -indicates timed-out 4.… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3 | TablehwIsdnUserOutTestOprTable | not-accessible | current | Operation table for the ISDN subscriber loop-line test: It realizes the function of the loop-line test for ISDN subscribers in the system. In the loop-line tes… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1 | RowhwIsdnUserOutTestOprEntry | not-accessible | current | Operation table for the ISDN subscriber loop-line test: It realizes the function of the loop-line test for ISDN subscribers in the system. In the loop-line tes… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1.1 | ColumnhwIsdnUserOutTestOprType | read-create | current | Describes the Operation type. Options: 1. stop(1) -stop the test 2. start(2) -start the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1.2 | ColumnhwIsdnUserOutTestActiveNT1 | read-create | current | Describes the ISDN loop line test-Activate NT1. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1.3 | ColumnhwIsdnUserOutTestDeactiveNT1 | read-create | current | Describes the ISDN loop line test-Deactivate NT1. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1.4 | ColumnhwIsdnUserOutTestTransBitError | read-create | current | Describes the ISDN loop line test-Transmission Bit Error Rate. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1.5 | ColumnhwIsdnUserOutTestErrCodeTestTime | read-create | current | Describes the Bit Error Rate Test Duration. Unit: s. Default: 120 s for the EMS |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1.6 | ColumnhwIsdnUserOutTestBusyProcessFlag | read-create | current | Describes the Busy control flag. Options: 1. busyNoTest(1) -indicates no test when busy 2. busyTest(2) -indicates remedy test when busy |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1.7 | ColumnhwIsdnUserOutTestStatus | read-only | current | Describes the Test status. Options: 1. normal(1) -indicates normal 2. abnormal(2) -indicates abnormal 3. portbusy(3) -indicates busy port 4. outoftime(4) -indi… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1.8 | ColumnhwIsdnUserOutTestActNT1Result | read-only | current | Describes the Activation NT1 result . Options: 1. normal(1) -indicates Normal 2. activeFail(2) -indicates failure 3. noNt1OrNt1NotUse(3) -indicates no NT1 or N… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1.9 | ColumnhwIsdnUserOutTestDeactNT1Result | read-only | current | Describes the Test result-Deactivate NT1. Options: 1. normal(1) -indicates normal 2. abnormal(2) -indicates abnormal 3. outoftime(3) -indicates timed-out 4. no… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1.10 | ColumnhwIsdnUserOutTestTransBitErrorResult | read-only | current | Describes the Test result-Transmission bit error rate. Options: 1. normal(1) -indicates normal 2. nt1BadOrNoTexist(2) -indicates NT1 is bad or no NT1 3. nt1Act… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1.11 | ColumnhwIsdnUserOutTestTotalSend | read-only | current | Describes the Total number of sent bits |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1.12 | ColumnhwIsdnUserOutTestCodeErrorNumber | read-only | current | Describes the Number of bit errors |
| 1.3.6.1.4.1.2011.6.21.2.1.1.3.1.13 | ColumnhwIsdnUserOutTestCodeErrorRate | read-only | current | Describes the Bit error rate |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4 | TablehwIsdnUserOutLineTestOprTable | not-accessible | current | Operation table for the ISDN subscriber loop-line test. It realizes the function of the loop-line test for ISDN subscribers in the system. In the loop-line tes… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1 | RowhwIsdnUserOutLineTestOprEntry | not-accessible | current | Operation table for the ISDN subscriber loop-line test. It realizes the function of the loop-line test for ISDN subscribers in the system. In the loop-line tes… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.1 | ColumnhwIsdnUserOutLineTestOprType | read-create | current | Describes the Operation type. Options: 1. stop(1) -stop the test 2. start(2) -start the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.2 | ColumnhwIsdnUserOutLineTestVoltage | read-create | current | ISDN loop line test-Voltage. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.3 | ColumnhwIsdnUserOutLineTestResistance | read-create | current | ISDN loop line test-Resistance. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.4 | ColumnhwIsdnUserOutLineTestCapacitance | read-create | current | ISDN loop line test-Capacitance. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.5 | ColumnhwIsdnUserOutLineTestBusyProcFlag | read-create | current | Busy control flag . Options: 1. busyNoTest(1) -indicates no test when busy 2. busyTest(2) -indicates remedy test when busy |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.6 | ColumnhwIsdnUserOutLineTestStatus | read-only | current | Test status. Options: 1. normal(1) -indicates normal 2. abnormal(2) -indicates abnormal 3. portbusy(3) -indicates busy port 4. outoftime(4) -indicates timed-ou… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.7 | ColumnhwIsdnUserOutLineTestConclusion | read-only | current | Conclusion Range:1-89 (Enumerated type. 1: Normal 2: Contact with the power line 3: A line mixed with others 4: B line mixed with others 5: Mixed with others (… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.8 | ColumnhwIsdnUserOutLineTestACAG | read-only | current | A->ground AC voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.9 | ColumnhwIsdnUserOutLineTestACBG | read-only | current | B->ground AC voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.10 | ColumnhwIsdnUserOutLineTestACAB | read-only | current | A->B AC voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.11 | ColumnhwIsdnUserOutLineTestDCAG | read-only | current | A->ground DC voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.12 | ColumnhwIsdnUserOutLineTestDCBG | read-only | current | B->ground DC voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.13 | ColumnhwIsdnUserOutLineTestDCAB | read-only | current | A->B DC voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.14 | ColumnhwIsdnUserOutLineTestRAG | read-only | current | A->ground insulation resistance. Unit: ohm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.15 | ColumnhwIsdnUserOutLineTestRBG | read-only | current | B->ground insulation resistance. Unit: ohm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.16 | ColumnhwIsdnUserOutLineTestRAB | read-only | current | A->B insulation resistance. Unit: ohm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.17 | ColumnhwIsdnUserOutLineTestCapAG | read-only | current | A->ground capacitance. Unit: nF |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.18 | ColumnhwIsdnUserOutLineTestCapBG | read-only | current | B->ground capacitance. Unit: nF |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.19 | ColumnhwIsdnUserOutLineTestCapAB | read-only | current | A->B capacitance. Unit: nF |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.20 | ColumnhwIsdnUserOutLineTestImpedance | read-create | current | Loop-Line Test-Impedance. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.21 | ColumnhwIsdnUserOutLineTestImpedanceAB | read-only | current | A->B impedance. Unit: ohm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.22 | ColumnhwIsdnUserOutLineTestImpedanceBA | read-only | current | B->A impedance. Unit: ohm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.23 | ColumnhwIsdnUserOutLineTestImpedanceAG | read-only | current | A->ground impedance. Unit: ohm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.24 | ColumnhwIsdnUserOutLineTestImpedanceBG | read-only | current | B->ground impedance. Unit: ohm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.25 | ColumnhwIsdnUserOutLineTestCurrent | read-create | current | Loop line test-Current. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.26 | ColumnhwIsdnUserOutLineTestACCurrentAG | read-only | current | A->ground AC current Unit: mA |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.27 | ColumnhwIsdnUserOutLineTestACCurrentBG | read-only | current | B->ground AC current. Unit: mA |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.28 | ColumnhwIsdnUserOutLineTestACCurrentAB | read-only | current | AB AC current. Unit: mA |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.29 | ColumnhwIsdnUserOutLineTestDCCurrentAG | read-only | current | A->ground DC current. Unit: mA |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.30 | ColumnhwIsdnUserOutLineTestDCCurrentBG | read-only | current | B->ground DC current. Unit: mA |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.31 | ColumnhwIsdnUserOutLineTestDCCurrentAB | read-only | current | AB DC current. Unit: mA |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.32 | ColumnhwIsdnUserOutLineTestLoopCurrent | read-create | current | Loop-Line Test-Loop Current. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.33 | ColumnhwIsdnUserOutLineTestLC | read-only | current | Loop Current. Unit: mA |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.34 | ColumnhwIsdnUserOutLineTestNoise | read-create | current | Loop-Line Test-Noise . Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.4.1.35 | ColumnhwIsdnUserOutLineTestN | read-only | current | Noise. Unit: dBm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.5 | TablehwIsdnPortStateSwitchTestOprTable | not-accessible | current | Operation table for the test on ISDN port status switching: It realizes the function of the test on ISDN port status switching in the system. In the test, the … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.5.1 | RowhwIsdnPortStateSwitchTestOprEntry | not-accessible | current | Operation table for the test on ISDN port status switching: It realizes the function of the test on ISDN port status switching in the system. In the test, the … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.5.1.1 | ColumnhwIsdnPortStateSwitchTestOprType | read-create | current | Operation type . Options: 1. switchNT1(1) -indicates Switch to NT1 2. switchLT(2) -indicates Switch to LT 3. switchnormal(3) -indicates Switch to the normal st… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.5.1.2 | ColumnhwIsdnPortStateSwitchTestStatus | read-only | current | Test status. Options: 1. success(1) -indicates normal 2. failure(2) -indicates abnormal 3. portBusy(3) -indicates busy port 4. timeOut(4) -indicates timed-out … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.6 | Tablehw112UserRingTestOprTable | not-accessible | current | Ringing test on the 112 analog subscriber phones: It realizes the function of the ringing test on the phones of subscribers in the system. This test helps chec… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.6.1 | Rowhw112UserRingTestOprEntry | not-accessible | current | Ringing test on the 112 analog subscriber phones: It realizes the function of the ringing test on the phones of subscribers in the system. This test helps chec… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.6.1.1 | Columnhw112UserRingTestOprType | read-create | current | Operation type . Options: 1. stop(1) -stop the test 2. start(2) -start the test Note:The 112 protocol does not define the stop command. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.6.1.2 | Columnhw112UserRingTestTime | read-create | current | Ringing duration. Unit: second |
| 1.3.6.1.4.1.2011.6.21.2.1.1.6.1.3 | Columnhw112UserRingTestResult | read-only | current | Test result. Options: 1. offhook(1) -indicates off hook 2. onhook(2) -indicates on hook The 112 protocol defines only two test results. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.7 | Tablehw112UserDialTestOprTable | not-accessible | current | Operation table for the test on the DTMF or pulse feature of the 112 analog subscriber phones: It realizes the test on the DTMF or pulse feature of the subscri… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.7.1 | Rowhw112UserDialTestOprEntry | not-accessible | current | Operation table for the test on the DTMF or pulse feature of the 112 analog subscriber phones: It realizes the test on the DTMF or pulse feature of the subscri… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.7.1.1 | Columnhw112UserDialTestOprType | read-create | current | Operation type . Options: 1. stop(1) -stop the test 2. start(2) -start the test Note:The 112 protocol does not define the stop command. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.7.1.2 | Columnhw112UserDialTestReceiveNumber | read-create | current | Number of received calls |
| 1.3.6.1.4.1.2011.6.21.2.1.1.7.1.3 | Columnhw112UserDialTestResult | read-only | current | Operation result. Options: 1. success(1) -indicates the test is successful 2. fail(2) -indicates the test fail |
| 1.3.6.1.4.1.2011.6.21.2.1.1.7.1.4 | Columnhw112UserDialTestDigit | read-only | current | Dialing numeral. Options: 1. n1(1) -indicates 1 2. n2(2) -indicates 2 3. n3(3) -indicates 3 4. n4(4) -indicates 4 5. n5(5) -indicates 5 6. n6(6) -indicates 6 7… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.7.1.5 | Columnhw112UserDialTestLowLevel | read-only | current | Digital low power level. Unit: dBm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.7.1.6 | Columnhw112UserDialTestHighLevel | read-only | current | Digital high power level. Unit: dBm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.7.1.7 | Columnhw112UserDialTestLowFreq | read-only | current | Digital low frequency. Unit: Hz |
| 1.3.6.1.4.1.2011.6.21.2.1.1.7.1.8 | Columnhw112UserDialTestHighFreq | read-only | current | Digital high frequency. Unit: Hz |
| 1.3.6.1.4.1.2011.6.21.2.1.1.7.1.9 | Columnhw112UserDialTestPulseLen | read-only | current | Pulse length. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.21.2.1.1.7.1.10 | Columnhw112UserDialTestMakeDur | read-only | current | Pulse duration. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.21.2.1.1.7.1.11 | Columnhw112UserDialTestBreakDur | read-only | current | Pulse break length. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.21.2.1.1.8 | Tablehw112UserHowlerTestOprrTable | not-accessible | current | Operation table for the howler tone test on 112 analog subscriber phones: It realizes the function of the howler tone test on the subscriber phones in the syst… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.8.1 | Rowhw112UserHowlerTestOprrEntry | not-accessible | current | Operation table for the howler tone test on 112 analog subscriber phones: It realizes the function of the howler tone test on the subscriber phones in the syst… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.8.1.1 | Columnhw112UserHowlerTestOprType | read-create | current | Operation type . Options: 1. stop(1) -stop the test 2. start(2) -start the test Note:The 112 protocol does not define the stop command. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.8.1.2 | Columnhw112UserHowlerTestTime | read-create | current | Howler tone length. Unit: second |
| 1.3.6.1.4.1.2011.6.21.2.1.1.8.1.3 | Columnhw112UserHowlerTestResult | read-only | current | Operation result. Options: 1. offhook(1) -indicates off hook 2. onhook(2) -indicates on hook The 112 protocol defines only two test results. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9 | Tablehw112IsdnDiagnoseTestOprTable | not-accessible | current | Operation table for the diagnosis test on the 112 ISDN subscribers: It realizes the function of the diagnosis test on the 112 ISDN subscribers in the system. I… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9.1 | Rowhw112IsdnDiagnoseTestOprEntry | not-accessible | current | Operation table for the diagnosis test on the 112 ISDN subscribers: It realizes the function of the diagnosis test on the 112 ISDN subscribers in the system. I… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9.1.1 | Columnhw112IsdnDiagnoseTestOprType | read-create | current | Operation type . Options: 1. start(1) -start the test 2. stop(2) -stop the test Note:The 112 protocol does not define the stop command. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9.1.2 | Columnhw112IsdnDiagnoseTestLoopType | read-create | current | Loopback type. Options: 1. nt1(1) -indicates NT1 2. ltet(2) -indicates LT/ET |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9.1.3 | Columnhw112IsdnDiagnoseTestLoopChannel | read-create | current | Loopback . Options: 1. bOne(1) -indicates B1 2. bTwo(2) -indicates B2 3. twoBAndD(3) -indicates 2B+D 4. pra(4) -indicates PRA |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9.1.4 | Columnhw112IsdnDiagnoseTestResult | read-only | current | Operation result. Options: 1. success(1) -indicates loopback success, and user stop the test manually; 2. failure(2) -indicates loopback failure; 3. timeoutsuc… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9.1.5 | Columnhw112IsdnDiagnoseTestLoopTime | read-create | current | Loop time. Unit: minute |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9.1.6 | Columnhw112IsdnDiagnoseTestLoopDirection | read-create | current | Loop direction. Options: 1. nearloop(1) -indicates loop direction is near loop 2. farloop(2) -indicates loop direction is far loop |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9.1.7 | Columnhw112IsdnDiagnoseTestLoopTs | read-create | current | Time slot to be looped back |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9.1.8 | Columnhw112IsdnDiagnoseTestDeferredTestFlag | read-create | current | deferred test flag: Options: 1. immediatetest(1) -immediate test; 2. deferredtest(2) -indicates deferred test: Initiated when the port is in service. If the po… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9.1.9 | Columnhw112IsdnDiagnoseTestDeferredTime | read-create | current | Deferred time(unit: minute): this leaf node is valid only when the value of hw112IsdnDiagnoseTestDeferredTestFlag is deferredtest(2). Default: 30(minute). |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9.1.10 | Columnhw112IsdnDiagnoseTestTimeoutProc | read-create | current | Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied Timeout proc: 1-when deferred time out, if the port is still in service, test will be c… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9.1.11 | Columnhw112IsdnDiagnoseTestIfIndex | read-only | current | Port IfIndex |
| 1.3.6.1.4.1.2011.6.21.2.1.1.9.1.12 | Columnhw112IsdnDiagnoseTestRequestID | read-only | current | Request ID |
| 1.3.6.1.4.1.2011.6.21.2.1.1.10 | TablehwPstnCallerEmulateOprTable | not-accessible | current | Operation table for the PSTN call emulation test (calling party): It realizes the function of the call emulation test (caller dial) in the system. This test he… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.10.1 | RowhwPstnCallerEmulateOprEntry | not-accessible | current | Operation table for the PSTN call emulation test (calling party): It realizes the function of the call emulation test (caller dial) in the system. This test he… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.10.1.1 | ColumnhwPstnCallerEmulateOprType | read-create | current | Operation type. Options: 1: stop(1) -indicates Stop test 2: start(2) -indicates Start test 3: offHookConfirm(3) -indicates Off hook confirmation 4: sendDTMF(4)… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.10.1.2 | ColumnhwPstnCallerEmulateCalledTelNo | read-create | current | Called telephone number (max length: 32) |
| 1.3.6.1.4.1.2011.6.21.2.1.1.10.1.3 | ColumnhwPstnCallerEmulateDialMode | read-create | current | Dial type (Enumerated type.) Options: 1. dtmf(1) -indicates the dial mode is DTMF 2. pulse(2) -indicates the dial mode is pulse |
| 1.3.6.1.4.1.2011.6.21.2.1.1.10.1.4 | ColumnhwPstnCallerEmulateTestStatus | read-only | current | Test Status. Options: 1. startSuccessfully(1) -indicates start successfully 2. stopSuccessfully(2) -indicates stop successfully 3. sendDTMFSuccessfully(3) -ind… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.10.1.5 | ColumnhwPstnCallerEmulateTestResult | read-only | current | Emulational Caller Test Result Options: 1. callerNoDialTone(1) -indicates the caller does not have dial tone 2. callerOffHookingBusy(2) -indicates the caller i… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.10.1.6 | ColumnhwPstnCallerEmulateTestDTMFDetected | read-only | current | Detected Dtmf Num List |
| 1.3.6.1.4.1.2011.6.21.2.1.1.10.1.7 | ColumnhwPstnCallerEmulateTestHoldTime | read-create | current | Caller Emulate test hold time, the test will auto ended when this time out. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.10.1.8 | ColumnhwPstnCallerEmulateReportNumber | read-only | current | The actual called number string checked and send to MGC or IMS. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.10.1.9 | ColumnhwPstnCallerEmulateLocalErrorCode | read-only | current | Error code send by Local side. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.10.1.10 | ColumnhwPstnCallerEmulateRemoteErrorCode | read-only | current | Error code received from remote side. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.10.1.11 | ColumnhwPstnCallerEmulateTestRequestID | read-only | current | Request ID |
| 1.3.6.1.4.1.2011.6.21.2.1.1.11 | TablehwPstnCalledEmulateOprTable | not-accessible | current | The operation table of the caller test of the PSTN call emulation test. It is used to realize the caller test of the PSTN call emulation test, which is used to… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.11.1 | RowhwPstnCalledEmulateOprEntry | not-accessible | current | The operation table of the caller test of the PSTN call emulation test. It is used to realize the caller test of the PSTN call emulation test, which is used to… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.11.1.1 | ColumnhwPstnCalledEmulateOprType | read-create | current | Operation type. Options: 1. stop(1) -indicates Stop test 2. start(2) -indicates Start test 3. dialConfirm(3) -indicates Dial number confirmation 4. sendDTMF(4)… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.11.1.2 | ColumnhwPstnCalledEmulateTestStatus | read-only | current | Test Status. Options: 1. startSuccessfully(1) -indicates start successfully 2. stopSuccessfully(2) -indicates stop successfully 3. sendDTMFSuccessfully(3) -ind… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.11.1.3 | ColumnhwPstnCalledEmulateTestResult | read-only | current | Emulational Called Test Result Options: 1. calledNoRing(1) -indicates the called user dose not ring 2. calledNoOffHook(2) -indicates the called user dose not o… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.11.1.4 | ColumnhwPstnCalledEmulateTestDTMFDetected | read-only | current | Detected Dtmf Num List |
| 1.3.6.1.4.1.2011.6.21.2.1.1.11.1.5 | ColumnhwPstnCalledEmulateTestWaitTime | read-create | current | Called Emulate test waiting time, the test will auto failed when this time out and called port not received ring. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.11.1.6 | ColumnhwPstnCalledEmulateTestHoldTime | read-create | current | Called Emulate test hold time, the test will auto ended when this time out. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.11.1.7 | ColumnhwPstnCalledEmulateLocalErrorCode | read-only | current | Error code send by Local side. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.11.1.8 | ColumnhwPstnCalledEmulateRemoteErrorCode | read-only | current | Error code received from remote side. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.11.1.9 | ColumnhwPstnCalledEmulateTestRequestID | read-only | current | Request ID |
| 1.3.6.1.4.1.2011.6.21.2.1.1.12 | TablehwPstnTelephoneTestOprTable | not-accessible | current | The operation table of the called test of the PSTN call emulation test. It is used to realize the called test of the PSTN call emulation test, which is used to… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.12.1 | RowhwPstnTelephoneTestOprEntry | not-accessible | current | The operation table of the called test of the PSTN call emulation test. It is used to realize the called test of the PSTN call emulation test, which is used to… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.12.1.1 | ColumnhwPstnTelephoneTestOprType | read-create | current | Operation type. Options: 1. stop(1) -indicates Stop test 2. start(2) -indicates Start test 3. ringing(3) -indicates Ring 4. stopRinging(4) -indicates Stop ring… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.12.1.2 | ColumnhwPstnTelephoneTestStatus | read-only | current | Test status. Options: 1. startSuccessfully(1) -indicates Start test successfully 2. stopSuccessfully(2) -indicates Stop test successfully 3. testOuttime(3) -in… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.12.1.3 | ColumnhwPstnTelephoneTestLoopResist | read-only | current | Loop resistance. Unit: ohm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.12.1.4 | ColumnhwPstnTelephoneTestHookingTime | read-only | current | Hookflash time. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.21.2.1.1.12.1.5 | ColumnhwPstnTelephoneTestReverse | read-only | current | Polarity reversal . Options: 1: aPositiveAndbNegative(1) -indicates A+ B- 2: aNegativeAndbPositive(2) -indicates A- B+ 3: noFeedVoltage(3) -indicates No feedin… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.12.1.6 | ColumnhwPstnTelephoneTestDialDigit | read-only | current | Dialing numeral Options: 1. n1(1) -indicates 1 2. n2(2) -indicates 2 3. n3(3) -indicates 3 4. n4(4) -indicates 4 5. n5(5) -indicates 5 6. n6(6) -indicates 6 7.… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.12.1.7 | ColumnhwPstnTelephoneTestPulseLen | read-only | current | Pulse length. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.21.2.1.1.12.1.8 | ColumnhwPstnTelephoneTestMakeDur | read-only | current | Pulse duration. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.21.2.1.1.12.1.9 | ColumnhwPstnTelephoneTestBreakDur | read-only | current | Pulse break length. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.21.2.1.1.12.1.10 | ColumnhwPstnTelephoneTestAssisTelno | read-only | current | Telephone number of the assistant port (the host sends the number to the EMS when the telephone test starts) |
| 1.3.6.1.4.1.2011.6.21.2.1.1.12.1.11 | ColumnhwPstnTelephoneTestRingTime | read-create | current | Ring time. Unit: second |
| 1.3.6.1.4.1.2011.6.21.2.1.1.13 | TablehwIsdnUserDiagnoseTestOprTable | not-accessible | current | Operation table for the diagnosis test on the ISDN subscribers: It realizes the diagnosis test on the ISDN subscribers in the system. This test helps check the… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.13.1 | RowhwIsdnUserDiagnoseTestOprEntry | not-accessible | current | Operation table for the diagnosis test on the ISDN subscribers: It realizes the diagnosis test on the ISDN subscribers in the system. This test helps check the… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.13.1.1 | ColumnhwIsdnUserDiagnoseTestOprType | read-create | current | Operation type. Options: 1: activate(1) -indicates Activate 2: deactivate(2) -indicates Deactivate 3: bbdLoopbackFromNT1(3) -indicates 2B+D loopback on NT1 4: … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.13.1.2 | ColumnhwIsdnUserDiagnoseTestStatus | read-only | current | Test status. Options: 1: startSuccessfully(1) -indicates Start test successfully (the EMS can activate or loop back a port without starting the test) 2: stopSu… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.14 | TablehwPstnSignalToneTestOprTable | not-accessible | current | Operation table for the PSTN signal tone test: It realizes the function of the PSTN signal tone test in the system. This test helps check whether the dial tone… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.14.1 | RowhwPstnSignalToneTestOprEntry | not-accessible | current | Operation table for the PSTN signal tone test: It realizes the function of the PSTN signal tone test in the system. This test helps check whether the dial tone… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.14.1.1 | ColumnhwPstnSignalToneTestOprType | read-create | current | Operation type. Options: 1. dialtone(1) -indicates Dial tone test 2. dailtoneDelay(2) -indicates Dial tone delay test 3. specialdailtone(3) -indicates Special … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.14.1.2 | ColumnhwPstnSignalToneTestBusyFlag | read-create | current | Signal tone test-Busy control. Options: 1. busynotest(1) -indicates no test when busy 2. busystrentest(2) -indicates forced test when busy 3. invalidvalue(-1) … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.14.1.3 | ColumnhwPstnSignalToneTestResult | read-only | current | Operation result. Options: 1. signaltoneNormal(1) -indicates Signal tone normal 2. noSignaltone(2) -indicates No signal tone 3. signaltoneAbnormal(3) -indicate… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.14.1.4 | ColumnhwPstnSignalToneTestDTDelayTime | read-only | current | Dial tone delay. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.21.2.1.1.14.1.5 | ColumnhwPstnSignalTonePlayTime | read-create | current | Tone play time. Default: 10 Unit: second |
| 1.3.6.1.4.1.2011.6.21.2.1.1.14.1.6 | ColumnhwPstnSignalToneActualDeferTime | read-only | current | Signal Actually Defer Timer. Unit: millisecond |
| 1.3.6.1.4.1.2011.6.21.2.1.1.14.1.7 | ColumnhwPstnSignalToneTestMode | read-create | current | Test Mode. Options: 1. outOfService(1) -Test port not need in service 2. inService(2) -Test port must be in servcie 3. invalidValue(-1) -Invalid value |
| 1.3.6.1.4.1.2011.6.21.2.1.1.14.1.8 | ColumnhwPstnSignalToneTestRequestID | read-only | current | Request ID |
| 1.3.6.1.4.1.2011.6.21.2.1.1.14.1.9 | ColumnhwPstnSignalToneTestDTStop | read-only | current | Detect stop dial tone. Options: 1.yes(1) -Detected stop dial tone 2.no(2) -Not detected stop dial tone 3.invalidValue(-1) -Invalid value |
| 1.3.6.1.4.1.2011.6.21.2.1.1.15 | TablehwIsdnMeterTestOprTable | not-accessible | current | Operation table for the ISDN meter test: It realizes the function of the ISDN meter test in the system. The test board provides, through the meter test functio… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.15.1 | RowhwIsdnMeterTestOprEntry | not-accessible | current | Operation table for the ISDN meter test: It realizes the function of the ISDN meter test in the system. The test board provides, through the meter test functio… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.15.1.1 | ColumnhwIsdnMeterTestOprType | read-create | current | Describes the Operation type. Options: 1. stop(1) -stop the test 2. start(2) -start the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.15.1.2 | ColumnhwIsdnMeterTestItem | read-create | current | Test item. Options: 1. inline(1) -indicates Circuit test 2. outline(2) -indicates Loop-line test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.15.1.3 | ColumnhwIsdnMeterTestStatus | read-only | current | Test status. Options: 1. success(1) -indicates normal 2. fail(2) -indicates abnormal 3. portbusy(3) -indicates busy port 4. outoftime(4) -indicates timed-out 5… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.16 | TablehwTestBusTestOprTable | not-accessible | current | Test on the circuit/loop-line test bus: It realizes the function of the test on the circuit/loop-line test bus. This test helps check whether the circuit/loop-… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.16.1 | RowhwTestBusTestOprEntry | not-accessible | current | Test on the circuit/loop-line test bus: It realizes the function of the test on the circuit/loop-line test bus. This test helps check whether the circuit/loop-… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.16.1.1 | ColumnhwTestBusTestOprType | read-create | current | Describes the Operation type. Options: 1. stop(1) -stop the test 2. start(2) -start the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.16.1.2 | ColumnhwTestBusTestBusType | read-create | current | Operation type. Options: 1. inbus(1) -indicates Circuit test bus 2. outbus(2) -indicates Loop-line test bus |
| 1.3.6.1.4.1.2011.6.21.2.1.1.16.1.3 | ColumnhwTestBusTestResult | read-only | current | Operation result. Options: 1. testbusNormal(1) -indicates Normal 2. voltageAbnormal(2) -indicates Voltage abnormal 3. resistanceAbnormal(3) -indicates Resistan… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.16.1.4 | ColumnhwTestBusTestVoltage | read-only | current | Voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.16.1.5 | ColumnhwTestBusTestResistance | read-only | current | Resistance. Unit: ohm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.16.1.6 | ColumnhwTestBusTestCapacitance | read-only | current | Capacitance. Unit: nF |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17 | TablehwFrameLooplineAdjustOprTable | not-accessible | current | The loop line test for get check value. The index of this table is hwFrameIndex |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1 | RowhwFrameLooplineAdjustOprEntry | not-accessible | current | The loop line test for get check value. The index of this entry is hwFrameIndex |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1.1 | ColumnhwFrameLooplineAdjustCutlineSlotID | read-create | current | Slot ID. Range:0-63 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1.2 | ColumnhwFrameLooplineAdjustCutlinePortID | read-create | current | Port ID. Range:0-63 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1.3 | ColumnhwFrameLooplineAdjustSelfMixedSlotID | read-create | current | Slot ID. Range:0-63 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1.4 | ColumnhwFrameLooplineAdjustSelfMixedPortID | read-create | current | Port ID. Range:0-63 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1.5 | ColumnhwFrameLooplineAdjustOprType | read-create | current | Operation type. Options: 1. test(1) -indicates test 2. modify(2) -indicates modify the test 3. restore(3) -indicates return to normal |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1.6 | ColumnhwFrameLooplineAdjustResult | read-only | current | Operation result. Options: 1: normal(1) -indicates Normal 2: outoftime(2) -indicates Timed-out 3: unknownError(3) -indicates Unknown error 4: notgetselfmixedva… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1.7 | ColumnhwFrameLooplineAdjustOprCab | read-create | current | A-B capacitance. Unit: nF |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1.8 | ColumnhwFrameLooplineAdjustOprCag | read-create | current | A-Ground capacitance. Unit: nF |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1.9 | ColumnhwFrameLooplineAdjustOprCbg | read-create | current | B-Ground capacitance. Unit: nF |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1.10 | ColumnhwFrameLooplineAdjustOprRab | read-create | current | A-B resistance.. Unit: ohm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1.11 | ColumnhwFrameLooplineAdjustFrameIndex | read-only | current | Frame index |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1.12 | ColumnhwFrameLooplineAdjustRequestID | read-only | current | Request ID |
| 1.3.6.1.4.1.2011.6.21.2.1.1.17.1.13 | ColumnhwFrameLooplineAdjustBusyFlag | read-create | current | Whether test or not when port is busy. Options: 1: cancel(1) -indicates notest 2: force(2) -indicates test 3: invalid(-1) -indicates invalid |
| 1.3.6.1.4.1.2011.6.21.2.1.1.18 | TablehwFrameLooplineAdjustTable | not-accessible | current | GET table for the shelf calibration values: It realizes the function of obtaining the shelf calibration values. The index of this table is hwFrameIndex. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.18.1 | RowhwFrameLooplineAdjustEntry | not-accessible | current | GET table for the shelf calibration values: It realizes the function of obtaining the shelf calibration values. The index of this entry is hwFrameIndex. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.18.1.1 | ColumnhwFrameLooplineAdjustFlag | read-only | current | Calibration value flag of the loop-line test. Options: 1: nosetflag(1) -indicates No calibration value is set 2: capacitanceflag(2) -indicates The capacitance … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.18.1.2 | ColumnhwFrameLooplineAdjustCab | read-only | current | A-B capacitance |
| 1.3.6.1.4.1.2011.6.21.2.1.1.18.1.3 | ColumnhwFrameLooplineAdjustCag | read-only | current | A-Ground capacitance |
| 1.3.6.1.4.1.2011.6.21.2.1.1.18.1.4 | ColumnhwFrameLooplineAdjustCbg | read-only | current | B-Ground capacitance |
| 1.3.6.1.4.1.2011.6.21.2.1.1.18.1.5 | ColumnhwFrameLooplineAdjustRab | read-only | current | A-B resistance |
| 1.3.6.1.4.1.2011.6.21.2.1.1.19 | ScalarhwQosTestIndexNext | read-only | current | This object contains an appropriate value to be used for hwQosTestIndex when creating entries in the hwQosTestTable. The value 0 indicates that no unassigned e… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20 | TablehwQosTestOprTable | not-accessible | current | Table for the QoS test. The index of this table is hwQosTestIndex. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1 | RowhwQosTestOprEntry | not-accessible | current | Table for the QoS test. The index of this entry is hwQosTestIndex. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.1 | ColumnhwQosTestIndex | not-accessible | current | Index of the a test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.2 | ColumnhwQosTestGWAddr | read-write | current | IP address of the local gateway |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.3 | ColumnhwQosTestPeerAddr | read-write | current | IP address of the peer gateway (or NAT, SAN) |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.4 | ColumnhwQosTestDuration | read-write | current | Test duration. By default, the test duration is one hour. Default:3600 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.5 | ColumnhwQosTestTick | read-write | current | Report cycle. By default, the report cycle is 60s. Default:60 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.6 | ColumnhwQosTestRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.7 | ColumnhwQosTestInPkts | read-only | current | Test In Pkts |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.8 | ColumnhwQosTestOutPkts | read-only | current | Test Out Pkts |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.9 | ColumnhwQosTestInOctets | read-only | current | Test In Octets |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.10 | ColumnhwQosTestOutOctets | read-only | current | Test Out Octets |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.11 | ColumnhwQosTestInDropPkts | read-only | current | Test In Drop Pkts |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.12 | ColumnhwQosTestStatsMaxDropPktsRate | read-only | current | Test Stats Max Drop Pkts Rate |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.13 | ColumnhwQosTestStatsMaxDropPktsPort | read-only | current | Test Stats Max Drop Pkts Port |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.14 | ColumnhwQosTestStatsMinDropPktsRate | read-only | current | Test Stats Min Drop Pkts Rate |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.15 | ColumnhwQosTestStatsMinDropPktsPort | read-only | current | Test Stats Min Drop Pkts Port |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.16 | ColumnhwQosTestStatsMaxDitherDelay | read-only | current | Test Stats Max Dither Delay |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.17 | ColumnhwQosTestStatsMaxDitherPort | read-only | current | Test Stats Max Dither Port |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.18 | ColumnhwQosTestStatsMinDitherDelay | read-only | current | Test Stats Min Dither Delay |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.19 | ColumnhwQosTestStatsMinDitherPort | read-only | current | Test Stats Min Dither Port |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.20 | ColumnhwQosTestStatsMaxLoopDelay | read-only | current | Test Stats Max Loop Delay |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.21 | ColumnhwQosTestStatsMaxLoopPort | read-only | current | Test Stats Max Loop Port |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.22 | ColumnhwQosTestStatsMinLoopDelay | read-only | current | Test Stats Min Loop Delay |
| 1.3.6.1.4.1.2011.6.21.2.1.1.20.1.23 | ColumnhwQosTestStatsMinLoopPort | read-only | current | Test Stats Min Loop Port |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21 | NodehwPotsLooplineThresholdTable | |||
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.1 | ScalarhwTouchThePowerVolThreshold | read-write | current | Hazardous AC voltage level Unit: V Default: 50 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.2 | ScalarhwLoopLineMixedVolThreshold | read-write | current | Foreign EMF DC voltage level. Unit: V Default: 10 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.3 | ScalarhwLoopLineGroundingVolThreshold | read-write | current | Loop line grounding: Ground resistance threshold. Unit: ohm Default: 20000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.4 | ScalarhwOffHookABMinThreshold | read-write | current | Off-hook: A-B resistance lower limit. Unit: ohm Default: 3000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.5 | ScalarhwOffHookABMaxThreshold | read-write | current | Off-hook: A-B resistance upper limit. Unit: ohm Default: 100000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.6 | ScalarhwOffHookLoopMinThreshold | read-write | current | Off-hook: loop resistance lower limit. Unit: ohm Initial value: 100 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.7 | ScalarhwOffHookLoopMaxThreshold | read-write | current | Off-hook: loop resistance upper limit. Unit: ohm Initial value: 3000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.8 | ScalarhwLoopLineMixedABThreshold | read-write | current | Loop line mixed with others: A-B resistance threshold. Unit: ohm Initial value: 2000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.9 | ScalarhwABPoorLineInsulationMinThreshold | read-write | current | A-B insulation difference: A-B resistance lower limit. Unit: ohm Initial value: 2000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.10 | ScalarhwABPoorLineInsulationMaxThreshold | read-write | current | A-B insulation difference: A-B resistance upper limit. Unit: ohm Default: 20000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.11 | ScalarhwLeakageGroundCapThreshold | read-write | current | Leakage: ground capacitance threshold. Unit: nF Default: 700 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.12 | ScalarhwNormalGroundCap1Threshold | read-write | current | Normal: ground capacitance threshold 1. Unit: nF Default: 200 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.13 | ScalarhwNormalGroundCap2Threshold | read-write | current | Normal: ground capacitance threshold 2. Unit: nF Default: 350 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.14 | ScalarhwNormalGroundCap3Threshold | read-write | current | Normal: ground capacitance threshold 3. Unit: nF Default: 50 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.15 | ScalarhwAbnormalImpedanceABhreshold | read-write | current | On hook: lower limit of the A-B abnormal impedance (ohm) Default: 10000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.16 | ScalarhwAbnormalACElectricCurrentThreshold | read-write | current | Abnormal AC current: threshold of the abnormal AC current (mA) Default: 1000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.17 | ScalarhwAbnormalDCElectricCurrentThreshold | read-write | current | Abnormal DC current: threshold of the abnormal DC current (mA) Default: 1000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.18 | ScalarhwAbnormalACVoltageThreshold | read-write | current | Abnormal AC voltage: threshold 1 of the abnormal AC voltage (V) Default: 10 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.19 | ScalarhwAbnormalDCVoltage1Threshold | read-write | current | Abnormal DC voltage: threshold 1 of the abnormal DC voltage (V) Default: 10 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.20 | ScalarhwAbnormalDCVoltage2Threshold | read-write | current | Abnormal DC voltage: threshold 2 of the abnormal DC voltage (V) Default: 55 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.21 | ScalarhwAbnormalOnhookLoopLineElectricCurrentMaxThreshold | read-write | current | Abnormal on-hook loop current: upper limit of the abnormal on-hook loop current (mA) Default: 30 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.22 | ScalarhwAbnormalOnhookLoopResistanceThreshold | read-write | current | Abnormal on-hook loop resistance: threshold of the abnormal on-hook loop resistance (ohm) Default: 250000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.23 | ScalarhwAbnormalOffhookLoopResistanceThreshold | read-write | current | Abnormal off-hook loop resistance: threshold of the abnormal off-hook loop resistance (ohm) Default: 250000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.24 | ScalarhwAbnormalGroundInsulationResistance1Threshold | read-write | current | Abnormal ground insulation resistance: threshold 1 of the abnormal ground insulation resistance (ohm) Default: 5000000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.25 | ScalarhwAbnormalGroundPoorLineInsulation1Threshold | read-write | current | Abnormal ground insulation difference: threshold 1 of the abnormal ground insulation difference (ohm) Default: 250000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.26 | ScalarhwAbnormalGroundCapacitanceThreshold | read-write | current | Abnormal ground capacitance: threshold of the abnormal ground capacitance (nF) Default: 200 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.27 | ScalarhwAbnormalCapacitanceABMinThreshold | read-write | current | Abnormal: lower limit of the abnormal A-B capacitance (nF) Default: 0 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.28 | ScalarhwAbnormalCapacitanceABMaxThreshold | read-write | current | Abnormal: upper limit of the abnormal A-B capacitance (nF) Default: 2000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.29 | ScalarhwAbnormalNoiseThreshold | read-write | current | Abnormal noise: threshold 1 of the abnormal noise (dBm) Default: 65 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.30 | ScalarhwLoopParamsCab | read-write | current | Cable characteristic capacitance per unit length between tip and ring Unit : nf per km Range: 0-100 Default: 19 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.31 | ScalarhwLoopParamsCagbg | read-write | current | Cable characteristic capacitance per unit length between tip and GND and ring and GND Unit : nf per km Range: 0-100 Default: 62 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.32 | ScalarhwLoopParamsRab | read-write | current | Cable loop DC resistance per unit length (sum of both wires) Unit : ohm per km Range: 50-600 Default: 295 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.33 | ScalarhwLrcThMaxsc | read-write | current | maximum resistance for tip or ring short-circuit to GND Unit : ohm Range: 0-1000000 Default: 2000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.34 | ScalarhwLrcThMaxLg | read-write | current | maximum resistance for tip or ring leakage to GND Unit : ohm Range: 0-1000000 Default: 200000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.35 | ScalarhwHdcvL | read-write | current | Hazardous DC voltage level Unit : mV Range: 0-500000 Default: 80000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.36 | ScalarhwFacvL | read-write | current | Foreign EMF AC voltage level Unit : mVrms Range: 0-200000 Default: 10000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.37 | ScalarhwMinetsiSc | read-write | current | minimum ETSI signature capacitance Unit : nf Range: 100-500 Default: 350 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.38 | ScalarhwMaxetsiSc | read-write | current | maximum ETSI signature capacitance Unit : nf Range: 500-1000 Default: 520 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.39 | ScalarhwMinetsiPr | read-write | current | minimum PPA resisitance Unit : ohm Range: 200000-400000 Default: 350000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.40 | ScalarhwMaxetsiPr | read-write | current | maximum PPA resistance Unit : ohm Range: 400000-700000 Default: 520000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.41 | ScalarhwMinZenerZv | read-write | current | minimum voltage to conduct current through the zener diode Unit : mV Range: 500-10000 Default: 1000 Step: 100 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.42 | ScalarhwMaxRcrTr | read-write | current | maximum RC network resistance between tip and ring Unit : ohm Range: 0-10000000 Default: 1000000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.43 | ScalarhwMinRcrTr | read-write | current | minimum RC network resistance between tip and ring Unit : ohm Range: 0-10000000 Default: 10000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.44 | ScalarhwCpeCab | read-write | current | minimum RC network capacitance between tip and ring Unit : nf Range: 0-5000 Default: 350 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.45 | ScalarhwMinhrTr | read-write | current | minimum high resistance between tip and ring Unit : ohm Range: 0-10000000 Default: 1000000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.46 | ScalarhwFvcLim | read-write | current | minimum foreign voltage Unit : mV Range: 0-50000 Default: 8000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.47 | ScalarhwMinOffhookR | read-write | current | minimum equivalent resistance when off-hook on zero kilometres Unit : ohm Range: 0-1000 Default: 200 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.48 | ScalarhwLepPar | read-write | current | line length windage for open wire failure Unit : m Range: 0-500 Default: 200 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.21.49 | ScalarhwLooplineThresholdOprType | read-write | current | Operation type. Options: 1. restore(1) -restore default threshold value 2. invalid(-1) -invalid |
| 1.3.6.1.4.1.2011.6.21.2.1.1.22 | NodehwResistEmendationThresholdTable | |||
| 1.3.6.1.4.1.2011.6.21.2.1.1.22.1 | ScalarhwAGroundResistanceEmendation | read-write | current | A-Ground resistance calibration value . Unit: ohm Default: 0 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.22.2 | ScalarhwBGroundResistanceEmendation | read-write | current | B-Ground resistance calibration value. Unit: ohm Default: 0 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.22.3 | ScalarhwABResistanceEmendation | read-write | current | A-B resistance calibration value. Unit: ohm Default: 0 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.22.4 | ScalarhwLoopResistanceEmendation | read-write | current | Loop resistance calibration value. Unit: ohm Default: 0 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.22.5 | ScalarhwPolarityReversalResistanceEmendation | read-write | current | Polarity reversal resistance calibration value. Unit: ohm Default: 0 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.23 | NodehwTestTimeLimitThresholdTable | |||
| 1.3.6.1.4.1.2011.6.21.2.1.1.23.1 | ScalarhwTelephoneTestWaitingAck | read-write | current | Timeout control parameter of the telephone test. Unit: minute Default: 15 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.23.2 | ScalarhwRemoteTestWaitingAck | read-write | current | Timeout control parameter of the call emulation test. Unit: minute Default: 15 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.23.3 | ScalarhwIsdnDiagnoseTestWaitingAck | read-write | current | Timeout control parameter of the digital subscriber diagnosis test. Unit: minute Default: 15 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.24 | TablehwSDLMeterTestOprTable | not-accessible | current | Operation table for the SDL meter test: It realizes the function of the SDL meter test in the system. The test board provides, through the meter test function,… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.24.1 | RowhwSDLMeterTestOprEntry | not-accessible | current | Operation table for the SDL meter test: It realizes the function of the SDL meter test in the system. The test board provides, through the meter test function,… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.24.1.1 | ColumnhwSDLMeterTestOprType | read-create | current | Operation type. Options: 1. stop(1) -stop the test 2. start(2) -start the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.24.1.2 | ColumnhwSDLMeterTestStatus | read-only | current | Test status. Options: 1. success(1) -indicates normal 2. fail(2) -indicates abnormal 3. portbusy(3) -indicates busy port 4. outoftime(4) -indicates timed-out 5… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25 | TablehwSDLDMMTestOprTable | not-accessible | current | Operation table for the SDL DMM test: It realizes the function of the SDL DMM test in the system. In the test, the voltage, resistance, and capacitance of the … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1 | RowhwSDLDMMTestOprEntry | not-accessible | current | Operation table for the SDL DMM test: It realizes the function of the SDL DMM test in the system. In the test, the voltage, resistance, and capacitance of the … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.1 | ColumnhwSDLDMMTestOprType | read-create | current | Describes the Operation type. Options: 1. stop(1) -stop the test 2. start(2) -start the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.2 | ColumnhwSDLDMMTestVoltage | read-create | current | SDL DMM test-Voltage . Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.3 | ColumnhwSDLDMMTestResistance | read-create | current | SDL DMM test-Resistance. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.4 | ColumnhwSDLDMMTestCapacitance | read-create | current | SDL DMM test-Capacitance. Options: 1. notest(1) -no test is applied 2. test(2) -a test is applied |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.5 | ColumnhwSDLDMMTestStatus | read-only | current | Test status. Options: 1. normal(1) -indicates Normal 2. abnormal(2) -indicates Abnormal 3. portbusy(3) -indicates Busy port 4. outoftime(4) -indicates Timed-ou… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.6 | ColumnhwSDLDMMTestConclusion | read-only | current | Conclusion. Options: 1. normal(1) -indicates Normal 2. powerline(2) -indicates Contact of power lines 3. amix(3) -indicates A line mixed with others 4. bmix(4)… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.7 | ColumnhwSDLDMMTestACAG | read-only | current | A->ground AC voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.8 | ColumnhwSDLDMMTestACBG | read-only | current | B->ground AC voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.9 | ColumnhwSDLDMMTestACAB | read-only | current | A->B AC voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.10 | ColumnhwSDLDMMTestDCAG | read-only | current | A->ground DC voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.11 | ColumnhwSDLDMMTestDCBG | read-only | current | B->ground DC voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.12 | ColumnhwSDLDMMTestDCAB | read-only | current | A->B DC voltage. Unit: millivolt, ab. mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.13 | ColumnhwSDLDMMTestRAG | read-only | current | A->ground insulation resistance. Unit: ohm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.14 | ColumnhwSDLDMMTestRBG | read-only | current | B->ground insulation resistance. Unit: ohm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.15 | ColumnhwSDLDMMTestRAB | read-only | current | A->B insulation resistance. Unit: ohm |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.16 | ColumnhwSDLDMMTestCapAG | read-only | current | A->ground capacitance. Unit: nF |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.17 | ColumnhwSDLDMMTestCapBG | read-only | current | B->ground capacitance. Unit: nF |
| 1.3.6.1.4.1.2011.6.21.2.1.1.25.1.18 | ColumnhwSDLDMMTestCapAB | read-only | current | A->B capacitance. Unit: nF |
| 1.3.6.1.4.1.2011.6.21.2.1.1.26 | TablehwLoopLineToneOprTable | not-accessible | current | Operation table for the loop-line tone test: It realizes the function of the test on the circuit and loop-line signals. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.26.1 | RowhwLoopLineToneOprEntry | not-accessible | current | Operation table for the loop-line tone test: It realizes the function of the test on the circuit and loop-line signals. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.26.1.1 | ColumnhwLoopLineToneOprType | read-create | current | Operation type. Options: 1. check(1) -indicates Detect the signal tone 2. send(2) -indicates Send the signal tone 3. stopsend(3) -indicates Stop sending the si… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.26.1.2 | ColumnhwLoopLineToneIntensity | read-create | current | Signal tone intensity. Options: 1. fivedB(1) -indicates 5 dB 2. tendB(2) -indicates 10 dB 3. fifteendB(3) -indicates 15 dB |
| 1.3.6.1.4.1.2011.6.21.2.1.1.26.1.3 | ColumnhwLoopLineToneBusyFlag | read-create | current | Busy control flag. Options: 1. busynotest(1) -indicates no test when busy 2. busystrentest(2) -indicates Forced test when busy |
| 1.3.6.1.4.1.2011.6.21.2.1.1.26.1.4 | ColumnhwLoopLineToneResult | read-only | current | Operation result. Options: 1. succeed(1) -indicates successful 2. failed(2) -indicates failed |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27 | TablehwPotsSelfCircuitTestOprTable | not-accessible | current | Operation table for the PSTN subscriber circuit test. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1 | RowhwPotsSelfCircuitTestOprEntry | not-accessible | current | Operation table for the PSTN subscriber circuit test. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.1 | ColumnhwPotsSelfCircuitTestOprType | read-create | current | Circuit test-Operation type. Options: 1. stop(1) -stop the test 2. start(2) -start the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.2 | ColumnhwPotsSelfCircuitTestBusyProcFlag | read-create | current | Circuit test-Busy control. Options: 1. busynotest(1) -indicates no test when busy 2. busytest(2) -indicates remedy test when busy 3. busystrentest(3) -indicate… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.3 | ColumnhwPotsSelfCircuitTestStatus | read-only | current | Circuit test-Test status. Options: 1. normal(1) -indicates Normal 2. testfail(2) -indicates Abnormal 3. portbusy(3) -indicates Busy port 4. outoftime(4) -indic… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.4 | ColumnhwPotsSelfCircuitTestVDDResult | read-only | current | Circuit test result-VDD result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal 3. notsupport(… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.5 | ColumnhwPotsSelfCircuitTestVBATLResult | read-only | current | Circuit test result-VBATL result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal 3. notsuppor… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.6 | ColumnhwPotsSelfCircuitTestVBATHResult | read-only | current | Circuit test result-VBATH result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal 3. notsuppor… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.7 | ColumnhwPotsSelfCircuitTestVBATRResult | read-only | current | Circuit test result-VBATR result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal 3. notsuppor… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.8 | ColumnhwPotsSelfCircuitTestLoopCurrentResult | read-only | current | Circuit test result-Loop current result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal 3. no… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.9 | ColumnhwPotsSelfCircuitTestFeedVResult | read-only | current | Circuit test result-Feeder voltage result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal 3. … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.10 | ColumnhwPotsSelfCircuitTestRingVResult | read-only | current | Circuit test result-Ring voltage result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal 3. no… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.11 | ColumnhwPotsSelfCircuitTestRingFResult | read-only | current | Circuit test result-Ring frequency result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal 3. … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.12 | ColumnhwPotsSelfCircuitTestVAGResult | read-only | current | Circuit test result-A->ground voltage result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.13 | ColumnhwPotsSelfCircuitTestVBGResult | read-only | current | Circuit test result-B->ground voltage result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.14 | ColumnhwPotsSelfCircuitTestDeferredTime | read-create | current | deferred time Unit: minute this leaf node is valid only when the value of hwPotsSelfCircuitTestBusyProcFlag is deferredtest(4). Default: 30(minute). |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.15 | ColumnhwPotsSelfCircuitTestTimeoutProc | read-create | current | timeout proc: Options: 1. notest(1) -indicates when deferred time out, if the port is still busy, test will be canceled 2. test(2) -indicates when deferred tim… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.16 | ColumnhwPotsSelfCircuitTestFeedVValue | read-only | current | Circuit Test Result-Feeder voltage Unit: millivolt, mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.17 | ColumnhwPotsSelfCircuitTestRingVValue | read-only | current | Circuit Test Result-Ringing current voltage Unit: millivolt, mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.18 | ColumnhwPotsSelfCircuitTestLoopCurrentValue | read-only | current | Circuit Test Result-Loop current Unit: millivolt, mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.19 | ColumnhwPotsSelfCircuitTestLoopIfIndex | read-only | current | Port Index |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.20 | ColumnhwPotsSelfCircuitTestLoopRequestID | read-only | current | Request ID |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.21 | ColumnhwPotsSelfCircuitTestOnHookDetectResult | read-only | current | Circuit test OnHookDetect result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal 3. notsuppor… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.22 | ColumnhwPotsSelfCircuitTestOffHookDetectResult | read-only | current | Circuit test OffHookDetect result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal 3. notsuppo… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.23 | ColumnhwPotsSelfCircuitTestStopRingResult | read-only | current | Circuit test StopRing result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal 3. notsupport(3)… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.24 | ColumnhwPotsSelfCircuitTestVPoleResult | read-only | current | Circuit test VPole result. Options: 1. normal(1) -indicates the test result is normal 2. abnormal(2) -indicates the test result is abnormal 3. notsupport(3) -i… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.25 | ColumnhwPotsSelfCircuitTestVBATLValue | read-only | current | Circuit Test VBATL Value Unit: mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.26 | ColumnhwPotsSelfCircuitTestVBATHValue | read-only | current | Circuit Test VBATH Value Unit: mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.27 | ColumnhwPotsSelfCircuitTestVBATRValue | read-only | current | Circuit Test VBATR Value Unit: mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.28 | ColumnhwPotsSelfCircuitTestRingFValue | read-only | current | Circuit Test Ring Frequency Value Unit: HZ |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.29 | ColumnhwPotsSelfCircuitTestVAGValue | read-only | current | Circuit Test A->Ground Value Unit: mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.30 | ColumnhwPotsSelfCircuitTestVBGValue | read-only | current | Circuit Test B->Ground Value Unit: mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.31 | ColumnhwPotsSelfCircuitTestVABPoleValue | read-only | current | Circuit Test A->B Pole Voltage Value Unit: mV |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.32 | ColumnhwPotsSelfCircuitTestABLCurrentValue | read-only | current | Circuit Test A->B Current Value Unit: uA |
| 1.3.6.1.4.1.2011.6.21.2.1.1.27.1.33 | ColumnhwPotsSelfCircuitTestSLICTempValue | read-only | current | Circuit SLIC Temp Value Unit: oC |
| 1.3.6.1.4.1.2011.6.21.2.1.1.28 | NodehwPstnCallTestOprTable | |||
| 1.3.6.1.4.1.2011.6.21.2.1.1.28.1 | ScalarhwPstnCallTestSerialNo | read-only | current | Serial number of the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.28.2 | ScalarhwPstnCallTestCommand | read-write | current | Test command. Options: 1. start(1) -start the test 2. stop(2) -stop the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.28.3 | ScalarhwPstnCallTestCmdType | read-write | current | Specifying the test range. Options: 1. fsp(1) -indicates By the shelf/slot/port 2. telno(2) -indicates By the telephone number 3. mgif(3) -indicates By the MG … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.28.4 | ScalarhwPstnCallTestStartFsp | read-write | current | Start shelf number/slot number/port number Range:0-65536 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.28.5 | ScalarhwPstnCallTestEndFsp | read-only | current | End shelf number/slot number/port number |
| 1.3.6.1.4.1.2011.6.21.2.1.1.28.6 | ScalarhwPstnCallTestStartTelNo | read-write | current | Start telephone number |
| 1.3.6.1.4.1.2011.6.21.2.1.1.28.7 | ScalarhwPstnCallTestEndTelNo | read-write | current | End telephone number |
| 1.3.6.1.4.1.2011.6.21.2.1.1.28.8 | ScalarhwPstnCallTestIfId | read-write | current | Interface ID Range: 0-7 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.28.9 | ScalarhwPstnCallTestDualCallFlag | read-write | current | Bi-directional call test flag. Options: 1. dualcall(1) -indicates Start the bi-directional call 2. notdualcall(2) -indicates Disable the bi-directional call |
| 1.3.6.1.4.1.2011.6.21.2.1.1.28.10 | ScalarhwPstnCallTestCalledTelNo | read-write | current | Telephone number of the called party |
| 1.3.6.1.4.1.2011.6.21.2.1.1.28.11 | ScalarhwPstnCallTestCallerId | read-write | current | ID of the subscriber under an interface. The subscriber under the MG interface uses the TID as its ID and the subscriber under the V5 interface uses the L3 add… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.29 | TablehwPstnCallTestResultTable | not-accessible | current | Table for the result of the query test The index of this table is hwPstnCallTestResultIndex |
| 1.3.6.1.4.1.2011.6.21.2.1.1.29.1 | RowhwPstnCallTestResultEntry | not-accessible | current | Table for the result of the query test The index of this entry is hwPstnCallTestResultIndex |
| 1.3.6.1.4.1.2011.6.21.2.1.1.29.1.1 | ColumnhwPstnCallTestResultIndex | not-accessible | current | Index. Range: 0-8000 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.29.1.2 | ColumnhwPstnCallTestResultSerialNo | read-only | current | Serial number of the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.29.1.3 | ColumnhwPstnCallTestResultFrameid | read-only | current | ID of the shelf where the tested port is located |
| 1.3.6.1.4.1.2011.6.21.2.1.1.29.1.4 | ColumnhwPstnCallTestResultSlotid | read-only | current | ID of the slot where the tested port is located |
| 1.3.6.1.4.1.2011.6.21.2.1.1.29.1.5 | ColumnhwPstnCallTestResultPortid | read-only | current | ID of the tested port |
| 1.3.6.1.4.1.2011.6.21.2.1.1.29.1.6 | ColumnhwPstnCallTestResult | read-only | current | Test result: 1. Normal 2. No dial tone 3. The called telephone does not ring 4. The voice circuit cannot get through 5. TSS is abnormal 6. The tested port is n… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.29.1.7 | ColumnhwPstnCallTestResultIfId | read-only | current | Interface ID |
| 1.3.6.1.4.1.2011.6.21.2.1.1.29.1.8 | ColumnhwPstnCallTestResultCallerId | read-only | current | Caller ID |
| 1.3.6.1.4.1.2011.6.21.2.1.1.29.1.9 | ColumnhwPstnCallTestResultTelNo | read-only | current | Telephone number of the tested port |
| 1.3.6.1.4.1.2011.6.21.2.1.1.30 | Tablehw112UserInDialTestOprTable | not-accessible | current | This table is used to check whether a subscriber telephone can work in the normal state. The method is that the operator emulates a tested port to make calls. … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.30.1 | Rowhw112UserInDialTestOprEntry | not-accessible | current | This table is used to check whether a subscriber telephone can work in the normal state. The method is that the operator emulates a tested port to make calls. … |
| 1.3.6.1.4.1.2011.6.21.2.1.1.30.1.1 | Columnhw112UserInDialTestOprType | read-create | current | Operation type. Options: 1. stop(1) -stop the test 2. start(2) -start the test The 112 protocol does not define the stop command. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.30.1.2 | Columnhw112UserInDialTestTime | read-create | current | Test duration Unit: second |
| 1.3.6.1.4.1.2011.6.21.2.1.1.30.1.3 | Columnhw112UserInDialTestResult | read-only | current | Operation result. Options: 1. over(1) -indicates Success |
| 1.3.6.1.4.1.2011.6.21.2.1.1.31 | TablehwISDNDiagnoseTestTable | not-accessible | current | User fault test table. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.31.1 | RowhwISDNDiagnoseTestEntry | not-accessible | current | User fault test table. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.31.1.1 | ColumnhwISDNDiagnoseTestPortIndex | not-accessible | current | Port index |
| 1.3.6.1.4.1.2011.6.21.2.1.1.31.1.2 | ColumnhwISDNDiagnoseTestOprType | read-create | current | Test operation . Options: 1. start(1) -indicates start the test 2. stop(2) -indicates stop the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.31.1.3 | ColumnhwISDNDiagnoseTestType | read-create | current | Test type. Options: 1. routinetest(1) -indicates routine test needs the port must be IS state, it only supports immediate test mode; 2. diagnosestest(2) -indic… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.31.1.4 | ColumnhwISDNDiagnoseTestItemType | read-create | current | Test item. Options: 1. lineActiveTest(1) -indicates line active test 2. lineActiveAndCRCSendTest(2) -indicates line active test and CRC send test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.31.1.5 | ColumnhwISDNDiagnoseTestResult | read-only | current | Test Result. Options: 1. activeok(1) -indicates line active ok 2. selfcheckfault(2) -indicates board selfcheck fault 3. loopback1operfault(3) -indicates loopba… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.31.1.6 | ColumnhwISDNDiagnoseTestCRCErrNum | read-only | current | Indicates the CRC error's number. |
| 1.3.6.1.4.1.2011.6.21.2.1.1.31.1.7 | ColumnhwISDNDiagnoseTestDeferredTestFlag | read-create | current | deferred test flag. Options: 1. immediatetest(1) -indicates immediate test; 2. deferredtest(2) -indicates deferred test: Initiated when the port is in service.… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.31.1.8 | ColumnhwISDNDiagnoseTestDeferredTime | read-create | current | Deferred time(Unit: minute): this leaf node is valid only when the value of hwISDNDiagnoseTestDeferredTestFlag is deferredtest(2). Range: 1-1440 Default: 30(mi… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.31.1.9 | ColumnhwISDNDiagnoseTestTimeoutProc | read-create | current | timeout proc: Options: 1. notest(1) -when deferred time out, if the port is still in service, line diagnose test will be canceled; 2. test(2) -when deferred ti… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.31.1.10 | ColumnhwISDNDiagnoseTestCrcDetectPeriod | read-create | current | The CRC Check Period in Test. Unit:second Range:10-86400 |
| 1.3.6.1.4.1.2011.6.21.2.1.1.31.1.11 | ColumnhwISDNDiagnoseTestRequestID | read-only | current | Request ID |
| 1.3.6.1.4.1.2011.6.21.2.1.1.32 | TablehwPstnCallEmulateOprTable | not-accessible | current | Operation table for the PSTN call emulation test (called party). It realizes the function of the PSTN call emulation test (called party). This test helps check… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.32.1 | RowhwPstnCallEmulateOprEntry | not-accessible | current | Operation table for the PSTN call emulation test (called party). It realizes the function of the PSTN call emulation test (called party). This test helps check… |
| 1.3.6.1.4.1.2011.6.21.2.1.1.32.1.1 | ColumnhwPstnCallEmulateIndex | read-create | current | Call emulation index |
| 1.3.6.1.4.1.2011.6.21.2.1.1.32.1.2 | ColumnhwPstnCallEmulateOprType | read-create | current | Operation type. Options: 1. stop(1) -stop the test 2. start(2) -start the test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.32.1.3 | ColumnhwPstnCallEmulateCallerIfindex | read-create | current | Calling port of the call emulation test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.32.1.4 | ColumnhwPstnCallEmulateCalledIfindex | read-create | current | Called port of the call emulation test |
| 1.3.6.1.4.1.2011.6.21.2.1.1.32.1.5 | ColumnhwPstnCallEmulateCalledTelNo | read-create | current | Called telephone number (max length: 32) |
| 1.3.6.1.4.1.2011.6.21.2.1.1.32.1.6 | ColumnhwPstnCallEmulateTestStatus | read-only | current | Test Status. Options: 1. nodialtone(1) -indicates No dial tone 2. dialfailed(2) -indicates Dialup fails 3. callednumbernotmatch(3) -indicates The called number… |
| 1.3.6.1.4.1.2011.6.21.2.2 | NodehwNTestTraps | |||
| 1.3.6.1.4.1.2011.6.21.2.2.1 | NodehwNTestTrapVbOids | |||
| 1.3.6.1.4.1.2011.6.21.2.2.1.2 | NodehwNTestVbOidsReason | |||
| 1.3.6.1.4.1.2011.6.21.2.2.3 | NodehwNTestGeneralTraps | |||
| 1.3.6.1.4.1.2011.6.21.2.2.3.0 | NodehwNTestGeneralTrapsOIDs | |||
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.50 | NotificationhwPstnCircuitTestTrap | current | PSTN subscriber circuit test result trap: 1. hwPstnCircuitTestStatus 2. hwPstnCircuitTestOffHookResult 3. hwPstnCircuitTestDialToneResult 4. hwPstnCircuitTestR… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.51 | Notificationhw112UserRingTestTrap | current | This notification indicates that the 112 PSTN subscriber ring test result trap: 1: hw112UserRingTestResult | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.52 | Notificationhw112UserDialTestTrap | current | This notification indicates the 112 PSTN subscriber dial test result trap: 1: hw112UserDialTestResult; 2: hw112UserDialTestDigit; 3: hw112UserDialTestLowLevel;… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.53 | Notificationhw112UserHowlerTestTrap | current | This notification indicates that the 112 PSTN subscriber howler test result trap: 1:hw112UserHowlerTestResult | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.54 | NotificationhwIsdnUserInTestTrap | current | This notification indicates the ISDN subscriber circuit test result trap: 1: hwIsdnUserInTestStatus; 2: hwIsdnUserInTestActiveResult; 3: hwIsdnUserInTestDeacti… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.55 | NotificationhwIsdnUserOutTestTrap | current | This notification indicates that the ISDN subscriber loop-line test result trap: 1: hwIsdnUserOutTestStatus; 2: hwIsdnUserOutTestActNT1Result; 3: hwIsdnUserOut… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.56 | NotificationhwIsdnUserOutLineTestTrap | current | This notification indicates that the ISDN subscriber loop-line test result trap: 1: hwIsdnUserOutLineTestStatus; 2: hwIsdnUserOutLineTestConclusion; 3: hwIsdnU… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.57 | NotificationhwIsdnPortStateSwitchTestTrap | current | This notification indicates that the trap for the result of switching the ISDN subscriber port: 1: hwIsdnPortStateSwitchTestStatus | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.58 | Notificationhw112IsdnDiagnoseTrap | current | This notification indicates that the trap for the result of 112 ISDN subscriber diagnosis test: 1: hw112IsdnDiagnoseTestRequestID; 2: hw112IsdnDiagnoseTestResu… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.59 | NotificationhwPstnCallerEmulateOperatorTrap | current | This notification indicates that the trap for the result of the PSTN call emulation test (calling party): 1: hwPstnCallerEmulateTestRequestID 2: hwPstnCallerEm… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.60 | NotificationhwPstnCalledEmulateOperatorTrap | current | This notification indicates that the trap for the result of the PSTN call emulation test (called party): 1: hwPstnCalledEmulateTestRequestID 2: hwPstnCalledEmu… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.61 | NotificationhwPstnTelephoneTestOperatorTrap | current | This notification indicates that the trap for the result of the PSTN telephone test: 1: hwPstnTelephoneTestStatus; 2: hwPstnTelephoneTestLoopResist; 3: hwPstnT… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.62 | NotificationhwIsdnUserDiagnoseTestOperatorTrap | current | This notification indicates that the trap for the ISDN subscriber diagnosis test: 1: hwIsdnUserDiagnoseTestStatus | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.63 | NotificationhwPstnSignalToneTestOperatorTrap | current | This notification indicates that the trap for the result of the PSTN signal tone test: 1: hwPstnSignalToneTestRequestID; 2: hwPstnSignalToneTestResult; 3: hwPs… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.64 | NotificationhwIsdnMeterTestOperatorTrap | current | This notification indicates that the trap for the result of the ISDN meter test: 1: hwIsdnMeterTestStatus | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.65 | NotificationhwTestBusTestTrap | current | This notification indicates that the trap for the result of the bus test: 1: hwTestBusTestResult; 2: hwTestBusTestVoltage; 3: hwTestBusTestResistance; 4: hwTes… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.66 | NotificationhwFrameLooplineAdjustTrap | current | This notification indicates that the trap for the result of the loop-line test calibration value: 1: hwFrameLooplineAdjustRequestID; 2: hwFrameLooplineAdjustRe… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.67 | NotificationhwSDLMeterTestOperatorTrap | current | This notification indicates that the trap for the result of the SDL meter test: 1: hwSDLMeterTestStatus | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.68 | NotificationhwSDLDMMTestTrap | current | This notification indicates that the trap for the result of the SDL DMM test: 1:hwSDLDMMTestStatus; 2: hwSDLDMMTestConclusion; 3: hwSDLDMMTestACAG; 4: hwSDLDMM… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.69 | NotificationhwQosTestOperatorTrap | current | This notification indicates that the trap for the QoS test result | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.70 | NotificationhwLoopLineToneOperatorTrap | current | This notification indicates that the trap for the result of the signal tone test: 1: hwLoopLineToneResult | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.71 | NotificationhwPotsSelfCircuitTestTrap | current | Trap for the result of the PSTN circuit test: 1: hwPotsSelfCircuitTestLoopRequestID; 2: hwPotsSelfCircuitTestStatus; 3: hwPotsSelfCircuitTestVDDResult; 4: hwPo… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.72 | NotificationhwPstnCallEmulateOperatorTrap | current | PSTN call emulation test: 1: hwPstnCallEmulateTestRequestID; 2: Test status (Enumerated type. 1: No dial tone; 2: Dialup fails; 3: The called number does not m… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.73 | NotificationhwISDNDiagnoseTestTrap | current | This notification indicates that the trap for the result of the ISDN diagnose test: 1: hwISDNDiagnoseTestRequestID; 2: hwISDNDiagnoseTestResult; 3: hwISDNDiagn… | |
| 1.3.6.1.4.1.2011.6.21.2.2.3.0.74 | NotificationhwPstnLoopTestTrap | current | This notification indicates that the trap for the result of the PSTN loop test: 1: hwPstnLoopTestRequestID; 2: hwPstnLoopTestResult; 3: hwPstnLoopTestAssistIfI… |