HUAWEI-QOS-MIB
244 objects
The mib is used for configuring QoS such as queue scheduling, rate limiting, rate mirroring and so on.
Imported Objects
| HUAWEI-DEVICE-MIB | hwFrameIndex hwPortIndex hwSlotIndex |
| HUAWEI-DSLAM-ACL-MIB | hwAclNumGroupAclNum |
| HUAWEI-MIB | huaweiMgmt |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.2 | IdentityhwAaa | The mib is used for configuring QoS such as queue scheduling, rate limiting, rate mirroring and so on. | ||
| 1.3.6.1.4.1.2011.5.2.2 | TablehwQueueTable | not-accessible | current | Indicates the queue scheduling feature, there is only one item. The index of this table is hwQueuePortIfIndex. |
| 1.3.6.1.4.1.2011.5.2.2.1 | RowhwQueueEntry | not-accessible | current | Indicates the queue scheduling feature, there is only one item. The index of this entry is hwQueuePortIfIndex. |
| 1.3.6.1.4.1.2011.5.2.2.1.1 | ColumnhwQueuePortIfIndex | read-only | current | The index of the table, it is used to configure the interface index for queue scheduling. Range: 1-255 0 indicates global. |
| 1.3.6.1.4.1.2011.5.2.2.1.2 | ColumnhwQueueScheduleMode | read-write | current | The flag indicates the queue scheduling mode. Options: 1. sp(1) -indicates the strict priority queue scheduling mode 2. wrr(2) -indicates the weighted round ro… |
| 1.3.6.1.4.1.2011.5.2.2.1.3 | ColumnhwQueueWeight1 | read-write | current | In the WRR mode, it indicates the weight of queue 1; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 1. |
| 1.3.6.1.4.1.2011.5.2.2.1.4 | ColumnhwQueueWeight2 | read-write | current | In the WRR mode, it indicates the weight of queue 2; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 2. |
| 1.3.6.1.4.1.2011.5.2.2.1.5 | ColumnhwQueueWeight3 | read-write | current | In the WRR mode, it indicates the weight of queue 3; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 3. |
| 1.3.6.1.4.1.2011.5.2.2.1.6 | ColumnhwQueueWeight4 | read-write | current | In the WRR mode, it indicates the weight of queue 4; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 4. |
| 1.3.6.1.4.1.2011.5.2.2.1.7 | ColumnhwQueueWeight5 | read-write | current | In the WRR mode, it indicates the weight of queue 5; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 5. |
| 1.3.6.1.4.1.2011.5.2.2.1.8 | ColumnhwQueueWeight6 | read-write | current | In the WRR mode, it indicates the weight of queue 6; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 6. |
| 1.3.6.1.4.1.2011.5.2.2.1.9 | ColumnhwQueueWeight7 | read-write | current | In the WRR mode, it indicates the weight of queue 7; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 7. |
| 1.3.6.1.4.1.2011.5.2.2.1.10 | ColumnhwQueueWeight8 | read-write | current | In the WRR mode, it indicates the weight of queue 8; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 8. |
| 1.3.6.1.4.1.2011.5.2.2.1.11 | ColumnhwWFQMaxWeight1 | read-write | current | Maximum bandwidth quota of queue 1 |
| 1.3.6.1.4.1.2011.5.2.2.1.12 | ColumnhwWFQMaxWeight2 | read-write | current | Maximum bandwidth quota of queue 2 |
| 1.3.6.1.4.1.2011.5.2.2.1.13 | ColumnhwWFQMaxWeight3 | read-write | current | Maximum bandwidth quota of queue 3 |
| 1.3.6.1.4.1.2011.5.2.2.1.14 | ColumnhwWFQMaxWeight4 | read-write | current | Maximum bandwidth quota of queue 4 |
| 1.3.6.1.4.1.2011.5.2.2.1.15 | ColumnhwWFQMaxWeight5 | read-write | current | Maximum bandwidth quota of queue 5 |
| 1.3.6.1.4.1.2011.5.2.2.1.16 | ColumnhwWFQMaxWeight6 | read-write | current | Maximum bandwidth quota of queue 6 |
| 1.3.6.1.4.1.2011.5.2.2.1.17 | ColumnhwWFQMaxWeight7 | read-write | current | Maximum bandwidth quota of queue 7 |
| 1.3.6.1.4.1.2011.5.2.2.1.18 | ColumnhwWFQMaxWeight8 | read-write | current | Maximum bandwidth quota of queue 8 |
| 1.3.6.1.4.1.2011.5.2.2.1.19 | ColumnhwQueueMaxDelay | read-only | current | Maximum delay. 0 indicates an invalid value, invalid in current version. |
| 1.3.6.1.4.1.2011.5.2.3 | TablehwRateLimitTable | not-accessible | current | Describes the traffic limitation on packets that are received by a specified port or a specified slot and that match the ACL rule. The indexes of this table ar… |
| 1.3.6.1.4.1.2011.5.2.3.1 | RowhwRateLimitEntry | not-accessible | current | Describes the traffic limitation on packets that are received by a specified port or a specified slot and that match the ACL rule. The indexes of this entry ar… |
| 1.3.6.1.4.1.2011.5.2.3.1.1 | ColumnhwRateLimitAclIndex | read-only | current | The delivery entry index of an ACL rule used for traffic limitation is a delivery record entry index used by software, which is meaningless to users. The index… |
| 1.3.6.1.4.1.2011.5.2.3.1.2 | ColumnhwRateLimitIfIndex | read-only | current | Specifies the index of a port or a slot for traffic limitation. It uniquely identifies a port or a slot. The value and algorithm are the same as those of ifInd… |
| 1.3.6.1.4.1.2011.5.2.3.1.3 | ColumnhwRateLimitDirection | read-only | current | Indicates the direction where an ACL rule used for traffic limitation takes effect. Currently, only the inbound direction is supported. Options: 1. invalid(0) … |
| 1.3.6.1.4.1.2011.5.2.3.1.4 | ColumnhwRateLimitUserAclNum | read-create | current | Describes the user-defined ACL rule group that is used when a user-defined ACL rule for traffic limitation is delivered to a specified port or a specified slot… |
| 1.3.6.1.4.1.2011.5.2.3.1.5 | ColumnhwRateLimitUserAclSubitem | read-create | current | Describes the user-defined ACL rule that is used when a user-defined ACL rule for traffic limitation is delivered to a specified port or a specified slot. This… |
| 1.3.6.1.4.1.2011.5.2.3.1.6 | ColumnhwRateLimitIpAclNum | read-create | current | Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for traffic limitation is delivered to a specified port or a spec… |
| 1.3.6.1.4.1.2011.5.2.3.1.7 | ColumnhwRateLimitIpAclSubitem | read-create | current | Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for traffic limitation is delivered to a specified port or a specified … |
| 1.3.6.1.4.1.2011.5.2.3.1.8 | ColumnhwRateLimitLinkAclNum | read-create | current | Describes the L2 ACL rule group that is used when an L2 ACL rule for traffic limitation is delivered to a specified port or a specified slot. Range: 0, 4000-49… |
| 1.3.6.1.4.1.2011.5.2.3.1.9 | ColumnhwRateLimitLinkAclSubitem | read-create | current | Describes the L2 ACL rule that is used when an L2 ACL rule for traffic limitation is delivered to a specified port or a specified slot. This leaf must be used … |
| 1.3.6.1.4.1.2011.5.2.3.1.10 | ColumnhwRateLimitTargetRate | read-create | current | Indicates the target value of traffic limitation on a port or a specified slot. Range: 64-10000000 (which must be an integer multiple of 64) Unit: Kbit/s. 0 in… |
| 1.3.6.1.4.1.2011.5.2.3.1.11 | ColumnhwRateLimitExceedDrop | read-create | current | Indicates the action when traffic exceeds the target value. Options: 1.true(1) -discard 2.false(2) -not discard If this leaf is not specified, the default valu… |
| 1.3.6.1.4.1.2011.5.2.3.1.12 | ColumnhwRateLimitExceedDscp | read-create | current | Describes the specified DSCP priority when configuring the DSCP priority of the packets that match the ACL rule. The larger the DSCP value is, the higher the p… |
| 1.3.6.1.4.1.2011.5.2.3.1.13 | ColumnhwRateLimitRuntime | read-only | current | Describes whether the ACL rule for traffic limitation delivered to a specified port or a specified slot takes effect. This leaf is read-only. Options: 1. true(… |
| 1.3.6.1.4.1.2011.5.2.3.1.14 | ColumnhwRateLimitRowStatus | read-create | current | Indicates the row status. It is used for delivering an ACL rule for traffic limitation to a specified port or a specified slot and deleting the delivered ACL r… |
| 1.3.6.1.4.1.2011.5.2.3.1.15 | ColumnhwRateLimitCir | read-create | current | Indicates the Committed information rate for rate limiting. Value Rage: 0, 64-10240000. 0 indicates an invalid value. unit: Kbit/s |
| 1.3.6.1.4.1.2011.5.2.3.1.16 | ColumnhwRateLimitCbs | read-create | current | Indicates the Committed burst size for rate limiting. Value Rage: 0, 2000-10240000. If not set, the value is min(2000+hwRateLimitCir*32, 1024000). 0 indicates … |
| 1.3.6.1.4.1.2011.5.2.3.1.17 | ColumnhwRateLimitPir | read-create | current | Indicates the Peak information rate for rate limiting. If not set, the value is min(hwRateLimitCir*2, 10240000). PIR must not be less than CIR. Value Rage: 0, … |
| 1.3.6.1.4.1.2011.5.2.3.1.18 | ColumnhwRateLimitPbs | read-create | current | Indicates the Committed information rate for rate limiting. If not set, the value is min(2000+hwRateLimitPir*32, 1024000). Value Rage: 0, 2000-10240000. 0 indi… |
| 1.3.6.1.4.1.2011.5.2.3.1.19 | ColumnhwRateLimitIpv6AclNum | read-create | current | Indicates the basic or advanced ACLv6 rule group that is used when a basic or advanced ACLv6 rule for traffic limitation is delivered to a specified port or a … |
| 1.3.6.1.4.1.2011.5.2.3.1.20 | ColumnhwRateLimitIpv6AclSubitem | read-create | current | Indicates the basic or advanced ACLv6 rule that is used when a basic or advanced ACLv6 rule for traffic limitation is delivered to a specified port or a specif… |
| 1.3.6.1.4.1.2011.5.2.3.1.21 | ColumnhwRateLimitRedDrop | read-create | current | Indicates the action when traffic is marked to red. TRUE(1): discard the packets. FALSE(2): don't discard the packets |
| 1.3.6.1.4.1.2011.5.2.3.1.22 | ColumnhwRateLimitRedRemarkDscp | read-create | current | Indicates the new DSCP value that is preset when the preset traffic is marked to red. -1 indicates an invalid value |
| 1.3.6.1.4.1.2011.5.2.3.1.23 | ColumnhwRateLimitYellowDrop | read-create | current | Indicates the action when traffic is marked to yellow. TRUE(1): discard the packets. FALSE(2): don't discard the packets |
| 1.3.6.1.4.1.2011.5.2.3.1.24 | ColumnhwRateLimitYellowRemarkDscp | read-create | current | Indicates the new DSCP value that is preset when the preset traffic is marked to yellow. -1 indicates an invalid value |
| 1.3.6.1.4.1.2011.5.2.4 | TablehwPriorityTable | not-accessible | current | Describes the priority marking for packets that match the ACL rule on a specified port or a specified slot. The indexes of this table are hwPriorityAclIndex, h… |
| 1.3.6.1.4.1.2011.5.2.4.1 | RowhwPriorityEntry | not-accessible | current | Describes the priority marking for packets that match the ACL rule on a specified port or a specified slot. The indexes of this entry are hwPriorityAclIndex, h… |
| 1.3.6.1.4.1.2011.5.2.4.1.1 | ColumnhwPriorityAclIndex | read-only | current | Indicates the delivery entry index of an ACL rule for priority marking. It is a delivery record entry index used by software, which is meaningless to users. Th… |
| 1.3.6.1.4.1.2011.5.2.4.1.2 | ColumnhwPriorityIfIndex | read-only | current | Indicates the port index or the slot index when the device delivers an ACL rule for priority marking to a specified port or a specified slot. The index uniquel… |
| 1.3.6.1.4.1.2011.5.2.4.1.3 | ColumnhwPriorityDirection | read-only | current | Indicates the direction where an ALC rule for priority marking takes effect when the device delivers an ACL rule to a specified port or a specified slot. Optio… |
| 1.3.6.1.4.1.2011.5.2.4.1.4 | ColumnhwPriorityUserAclNum | read-create | current | Describes the user-defined ACL rule group that is used when a user-defined ACL rule for priority marking is delivered to a specified port or a specified slot. … |
| 1.3.6.1.4.1.2011.5.2.4.1.5 | ColumnhwPriorityUserAclSubitem | read-create | current | Describes the user-defined ACL rule that is used when a user-defined ACL rule for priority marking is delivered to a specified port or a specified slot. This l… |
| 1.3.6.1.4.1.2011.5.2.4.1.6 | ColumnhwPriorityIpAclNum | read-create | current | Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for priority marking is delivered to a specified port or a specif… |
| 1.3.6.1.4.1.2011.5.2.4.1.7 | ColumnhwPriorityIpAclSubitem | read-create | current | Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for priority marking is delivered to a specified port or a specified sl… |
| 1.3.6.1.4.1.2011.5.2.4.1.8 | ColumnhwPriorityLinkAclNum | read-create | current | Describes the L2 ACL rule group that is used when an L2 ACL rule for priority marking is delivered to a specified port or a specified slot. Range: 0, 4000-4999… |
| 1.3.6.1.4.1.2011.5.2.4.1.9 | ColumnhwPriorityLinkAclSubitem | read-create | current | Describes the L2 ACL rule that is used when an L2 ACL rule for priority marking is delivered to a specified port or a specified slot. This leaf must be used to… |
| 1.3.6.1.4.1.2011.5.2.4.1.10 | ColumnhwPriorityDscp | read-create | current | Describes the specified DSCP priority when configuring the DSCP priority for the packets that match the ACL rule for priority marking. The larger the DSCP valu… |
| 1.3.6.1.4.1.2011.5.2.4.1.11 | ColumnhwPriorityIpPreValue | read-create | current | Describes the specified IP precedence when configuring the IP precedence for the packets that match the ACL rule for precedence marking. Range: 0-7, 255 The la… |
| 1.3.6.1.4.1.2011.5.2.4.1.12 | ColumnhwPriorityIpPreFromCos | read-create | current | Indicates whether to set the IP priority the same as the 802.1p priority, that is, copy the 802.1p priority. Options: 1. true(1) -copy 2. false(2) -not copy If… |
| 1.3.6.1.4.1.2011.5.2.4.1.13 | ColumnhwPriorityCosValue | read-create | current | Describes the specified 802.1p priority when configuring the 802.1p priority for the packets that match the ACL rule for priority marking. Range: 0-7, 255 The … |
| 1.3.6.1.4.1.2011.5.2.4.1.14 | ColumnhwPriorityCosFromIpPre | read-create | current | Indicates whether to set the IP priority the same as the 802.1p priority, that is, copy the IP priority. Options: 1. true(1) -copy 2. false(2) -not copy If thi… |
| 1.3.6.1.4.1.2011.5.2.4.1.15 | ColumnhwPriorityLocalPre | read-create | current | Describes the specified local priority when configuring the local priority for the packets that match the ACL rule for priority marking. Range: 0-7, 255 The la… |
| 1.3.6.1.4.1.2011.5.2.4.1.16 | ColumnhwPriorityRuntime | read-only | current | Describes whether the ACL rule for priority marking delivered to a specified port or a specified slot takes effect. This leaf is read-only. Options: 1. true(1)… |
| 1.3.6.1.4.1.2011.5.2.4.1.17 | ColumnhwPriorityRowStatus | read-create | current | Indicates the row status. It is used for delivering an ACL rule for priority marking to a specified port or a specified slot and deleting the delivered ACL rul… |
| 1.3.6.1.4.1.2011.5.2.4.1.18 | ColumnhwPriorityIpv6AclNum | read-create | current | Indicates the basic or advanced ACLv6 rule group that is used when a basic or advanced ACLv6 rule for priority marking is delivered to a specified port or a sp… |
| 1.3.6.1.4.1.2011.5.2.4.1.19 | ColumnhwPriorityIpv6AclSubitem | read-create | current | Indicates the basic or advanced ACLv6 rule that is used when a basic or advanced ACLv6 rule for priority marking is delivered to a specified port or a specifie… |
| 1.3.6.1.4.1.2011.5.2.5 | TablehwRedirectTable | not-accessible | current | Describes the redirection for packets that match the ACL rule from a port to another port. The indexes of this table are hwRedirectAclIndex, hwRedirectIfIndex … |
| 1.3.6.1.4.1.2011.5.2.5.1 | RowhwRedirectEntry | not-accessible | current | Describes the redirection for packets that match the ACL rule from a port to another port. The indexes of this entry are hwRedirectAclIndex, hwRedirectIfIndex … |
| 1.3.6.1.4.1.2011.5.2.5.1.1 | ColumnhwRedirectAclIndex | read-only | current | The delivery entry index of an ACL rule for redirecting packets is a delivery record entry index used by software, which is meaningless to users. The index is … |
| 1.3.6.1.4.1.2011.5.2.5.1.2 | ColumnhwRedirectIfIndex | read-only | current | Indicates the port index when the device delivers an ACL rule for redirecting packets to a specified port. The index uniquely identifies a port. The value and … |
| 1.3.6.1.4.1.2011.5.2.5.1.3 | ColumnhwRedirectDirection | read-only | current | Indicates the direction where an ACL rule for redirecting packets takes effect when the device delivers an ACL rule to a specified port. Options: 1. invalid(0)… |
| 1.3.6.1.4.1.2011.5.2.5.1.4 | ColumnhwRedirectUserAclNum | read-create | current | Describes the user-defined ACL rule group that is used when a user-defined ACL rule for redirecting packets is delivered to a specified port. Range: 0, 5000-59… |
| 1.3.6.1.4.1.2011.5.2.5.1.5 | ColumnhwRedirectUserAclSubitem | read-create | current | Describes the user-defined ACL rule that is used when a user-defined ACL rule for redirecting packets is delivered to a specified port. This leaf must be used … |
| 1.3.6.1.4.1.2011.5.2.5.1.6 | ColumnhwRedirectIpAclNum | read-create | current | Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for redirecting packets is delivered to a specified port. Range: … |
| 1.3.6.1.4.1.2011.5.2.5.1.7 | ColumnhwRedirectIpAclSubitem | read-create | current | Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for redirecting packets is delivered to a specified port. This leaf mus… |
| 1.3.6.1.4.1.2011.5.2.5.1.8 | ColumnhwRedirectLinkAclNum | read-create | current | Describes the L2 ACL rule group that is used when an L2 ACL rule for redirecting packets is delivered to a specified port. Range: 0, 4000-4999 Make sure that t… |
| 1.3.6.1.4.1.2011.5.2.5.1.9 | ColumnhwRedirectLinkAclSubitem | read-create | current | Describes the L2 ACL rule that is used when an L2 ACL rule for redirecting packets is delivered to a specified port. This leaf must be used together with hwRed… |
| 1.3.6.1.4.1.2011.5.2.5.1.10 | ColumnhwRedirectToCpu | read-create | current | Indicates whether to redirect packets to the CPU. After the packets are redirected to the CPU, they cannot be forwarded. Options: 1. true(1) -indicates to redi… |
| 1.3.6.1.4.1.2011.5.2.5.1.11 | ColumnhwRedirectToIfIndex | read-create | current | Indicates the index for redirecting the packet to the destination port. The value and algorithm are the same as those of ifIndex. Range: 0-4294967295 |
| 1.3.6.1.4.1.2011.5.2.5.1.12 | ColumnhwRedirectRuntime | read-only | current | Describes whether the ACL rule for redirecting packets delivered to a specified port takes effect. This leaf is read-only. Options: 1. true(1) -if the ACL rule… |
| 1.3.6.1.4.1.2011.5.2.5.1.13 | ColumnhwRedirectRowStatus | read-create | current | Indicates the row status. It is used for delivering an ACL rule for redirecting packets to a specified port and deleting the delivered ACL rule on a port. Opti… |
| 1.3.6.1.4.1.2011.5.2.5.1.14 | ColumnhwRedirectIpv6AclNum | read-create | current | Indicates the basic or advanced ACLv6 rule group that is used when a basic or advanced ACLv6 rule for redirecting packets is delivered to a specified port. Ran… |
| 1.3.6.1.4.1.2011.5.2.5.1.15 | ColumnhwRedirectIpv6AclSubitem | read-create | current | Indicates the basic or advanced ACLv6 rule that is used when a basic or advanced ACLv6 rule for redirecting packets is delivered to a specified port. This leaf… |
| 1.3.6.1.4.1.2011.5.2.6 | TablehwStatisticTable | not-accessible | current | Describes the statistics of packets that match the ACL rule on a specified port. The indexes of this table are hwStatisticAclIndex, hwStatisticIfIndex, and hwS… |
| 1.3.6.1.4.1.2011.5.2.6.1 | RowhwStatisticEntry | not-accessible | current | Describes the statistics of packets that match the ACL rule on a specified port. The indexes of this entry are hwStatisticAclIndex, hwStatisticIfIndex, and hwS… |
| 1.3.6.1.4.1.2011.5.2.6.1.1 | ColumnhwStatisticAclIndex | read-only | current | Indicates the delivery entry index of an ACL rule for traffic measurement. It is a delivery record entry index used by software, which is meaningless to users.… |
| 1.3.6.1.4.1.2011.5.2.6.1.2 | ColumnhwStatisticIfIndex | read-only | current | Indicates the port index when the device delivers an ACL rule for traffic measurement to a specified port. The index uniquely identifies a port. The value and … |
| 1.3.6.1.4.1.2011.5.2.6.1.3 | ColumnhwStatisticDirection | read-only | current | Indicates the direction where an ACL rule for traffic measurement takes effect when the device delivers an ACL rule to a specified port. Options: 1. invalid(0)… |
| 1.3.6.1.4.1.2011.5.2.6.1.4 | ColumnhwStatisticUserAclNum | read-create | current | Describes the user-defined ACL rule group that is used when a user-defined ACL rule for traffic measurement is delivered to a specified port. Range: 0, 5000-59… |
| 1.3.6.1.4.1.2011.5.2.6.1.5 | ColumnhwStatisticUserAclSubitem | read-create | current | Describes the user-defined ACL rule that is used when a user-defined ACL rule for traffic measurement is delivered to a specified port. This leaf must be used … |
| 1.3.6.1.4.1.2011.5.2.6.1.6 | ColumnhwStatisticIpAclNum | read-create | current | Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for traffic measurement is delivered to a specified port. Range: … |
| 1.3.6.1.4.1.2011.5.2.6.1.7 | ColumnhwStatisticIpAclSubitem | read-create | current | Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for traffic measurement is delivered to a specified port. This leaf mus… |
| 1.3.6.1.4.1.2011.5.2.6.1.8 | ColumnhwStatisticLinkAclNum | read-create | current | Describes the L2 ACL rule group that is used when an L2 ACL rule for traffic measurement is delivered to a specified port. Range: 0, 4000-4999 Make sure that t… |
| 1.3.6.1.4.1.2011.5.2.6.1.9 | ColumnhwStatisticLinkAclSubitem | read-create | current | Describes the L2 ACL rule that is used when an L2 ACL rule for traffic measurement is delivered to a specified port. This leaf must be used together with hwSta… |
| 1.3.6.1.4.1.2011.5.2.6.1.10 | ColumnhwStatisticRuntime | read-only | current | Describes whether the ACL rule for traffic measurement delivered to a specified port takes effect. This leaf is read-only. Options: 1. true(1) -if the ACL rule… |
| 1.3.6.1.4.1.2011.5.2.6.1.11 | ColumnhwStatisticPacketCount | read-only | current | Describes the statistics of packets that matches an ACL rule on a specified port. |
| 1.3.6.1.4.1.2011.5.2.6.1.12 | ColumnhwStatisticCountClear | read-write | current | Used for deleting the statistics of packets that matches an ACL rule on a specified port. To clear hwStatisticPacketCount, you can set this leaf to cleared(1).… |
| 1.3.6.1.4.1.2011.5.2.6.1.13 | ColumnhwStatisticRowStatus | read-create | current | Indicates the row status. It is used for delivering an ACL rule for traffic measurement to a specified port and deleting the delivered ACL rule on a port. Opti… |
| 1.3.6.1.4.1.2011.5.2.6.1.14 | ColumnhwStatisticUnit | read-create | current | Indicates Unit of a standard or extended ACLv6 for traffic measurement. Options: 1. packet(1) -measure by packet 2. byte(2) -measure by byte Default: packet(1) |
| 1.3.6.1.4.1.2011.5.2.6.1.15 | ColumnhwStatisticByteCount | read-only | current | Indicates the count of matched bytes. |
| 1.3.6.1.4.1.2011.5.2.6.1.16 | ColumnhwStatisticIpv6AclNum | read-create | current | Indicates the basic or advanced ACLv6 rule group that is used when a basic or advanced ACLv6 rule for traffic measurement is delivered to a specified port. Ran… |
| 1.3.6.1.4.1.2011.5.2.6.1.17 | ColumnhwStatisticIpv6AclSubitem | read-create | current | Indicates the basic or advanced ACLv6 rule that is used when a basic or advanced ACLv6 rule for traffic measurement is delivered to a specified port. This leaf… |
| 1.3.6.1.4.1.2011.5.2.7 | TablehwMirrorTable | not-accessible | current | Describes the mirroring for packets that match the ACL rule from a port or a slot to another port. The indexes of this table are hwMirrorAclIndex, hwMirrorIfIn… |
| 1.3.6.1.4.1.2011.5.2.7.1 | RowhwMirrorEntry | not-accessible | current | Describes the mirroring for packets that match the ACL rule from a port or a slot to another port. The indexes of this entry are hwMirrorAclIndex, hwMirrorIfIn… |
| 1.3.6.1.4.1.2011.5.2.7.1.1 | ColumnhwMirrorAclIndex | read-only | current | Indicates the delivery entry index of an ACL rule for mirroring packets. It is a delivery record entry index used by software, which is meaningless to users. T… |
| 1.3.6.1.4.1.2011.5.2.7.1.2 | ColumnhwMirrorIfIndex | read-only | current | Indicates the port or the slot index when the device delivers an ACL rule for mirroring packets to a specified port. The index uniquely identifies a port or a … |
| 1.3.6.1.4.1.2011.5.2.7.1.3 | ColumnhwMirrorDirection | read-only | current | Indicates the direction where an ACL rule for mirroring packets takes effect when the device delivers an ACL rule to a specified port or a specified slot. Opti… |
| 1.3.6.1.4.1.2011.5.2.7.1.4 | ColumnhwMirrorUserAclNum | read-create | current | Describes the user-defined ACL rule group that is used when a user-defined ACL rule for mirroring packets is delivered to a specified port or a specified slot.… |
| 1.3.6.1.4.1.2011.5.2.7.1.5 | ColumnhwMirrorUserAclSubitem | read-create | current | Describes the user-defined ACL rule that is used when a user-defined ACL rule for mirroring packets is delivered to a specified port or a specified slot. This … |
| 1.3.6.1.4.1.2011.5.2.7.1.6 | ColumnhwMirrorIpAclNum | read-create | current | Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for mirroring packets is delivered to a specified port or a speci… |
| 1.3.6.1.4.1.2011.5.2.7.1.7 | ColumnhwMirrorIpAclSubitem | read-create | current | Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for mirroring packets is delivered to a specified port or a specified s… |
| 1.3.6.1.4.1.2011.5.2.7.1.8 | ColumnhwMirrorLinkAclNum | read-create | current | Describes the L2 ACL rule group that is used when an L2 ACL rule for mirroring packets is delivered to a specified port or a specified slot. Range: 0, 4000-499… |
| 1.3.6.1.4.1.2011.5.2.7.1.9 | ColumnhwMirrorLinkAclSubitem | read-create | current | Describes the L2 ACL rule that is used when an L2 ACL rule for mirroring packets is delivered to a specified port or a specified slot. This leaf must be used t… |
| 1.3.6.1.4.1.2011.5.2.7.1.10 | ColumnhwMirrorToIfIndex | read-create | current | Indicates the index for mirroring the packets to the destination port. The value and algorithm are the same as those of ifIndex. Range: 0-4294967295 |
| 1.3.6.1.4.1.2011.5.2.7.1.11 | ColumnhwMirrorRuntime | read-only | current | Describes whether the ACL rule for mirroring packets delivered to a specified port or a specified slot takes effect. This leaf is read-only. Options: 1. true(1… |
| 1.3.6.1.4.1.2011.5.2.7.1.12 | ColumnhwMirrorRowStatus | read-create | current | Indicates the row status. It is used for delivering an ACL rule for mirroring packets to a specified port or a specified slot and deleting the delivered ACL ru… |
| 1.3.6.1.4.1.2011.5.2.7.1.13 | ColumnhwMirrorIpv6AclNum | read-create | current | Indicates the basic or advanced ACLv6 rule group that is used when a basic or advanced ACLv6 rule for mirroring packets is delivered to a specified port or a s… |
| 1.3.6.1.4.1.2011.5.2.7.1.14 | ColumnhwMirrorIpv6AclSubitem | read-create | current | Indicates the basic or advanced ACLv6 rule that is used when a basic or advanced ACLv6 rule for mirroring packets is delivered to a specified port or a specifi… |
| 1.3.6.1.4.1.2011.5.2.9 | TablehwLineRateTable | not-accessible | current | Describes the rate limitation on packets that match the ACL rule on a specified port. The index of this table is hwLineRateIfIndex. |
| 1.3.6.1.4.1.2011.5.2.9.1 | RowhwLineRateEntry | not-accessible | current | Describes the rate limitation on packets that match the ACL rule on a specified port. The index of this entry is hwLineRateIfIndex. |
| 1.3.6.1.4.1.2011.5.2.9.1.1 | ColumnhwLineRateIfIndex | read-only | current | Indicates the index of the port on which rate limitation is configured. The value and algorithm are the same as those of ifIndex. Range: 0-4294967295 |
| 1.3.6.1.4.1.2011.5.2.9.1.2 | ColumnhwLineRateValue | read-create | current | Indicates the outbound rate limitation of a port. Range: -1, 64-10000000 (which must be an integer multiple of 64) Unit: Kbit/s. when the value is set to -1 an… |
| 1.3.6.1.4.1.2011.5.2.9.1.3 | ColumnhwLineRateRowStatus | read-create | current | Indicates the row status. It is used to configure, modify, or delete an ACL rule for rate limitation on a specified port. Options: 1. active(1) -when this leaf… |
| 1.3.6.1.4.1.2011.5.2.9.1.4 | ColumnhwLineRateInboundValue | read-create | current | Indicates the inbound rate limitation of a port. Range: -1, 64-10000000 (which must be an integer multiple of 64) Unit: Kbit/s. when the value is set to -1 and… |
| 1.3.6.1.4.1.2011.5.2.9.1.5 | ColumnhwLineRateInboundCarValue | read-create | current | Indicates the inbound rate limitation of a port in CAR mode. Range: -1, 64-10000000 (which must be an integer multiple of 64) Unit: Kbit/s. when the value is s… |
| 1.3.6.1.4.1.2011.5.2.10 | NodehwQosTraps | |||
| 1.3.6.1.4.1.2011.5.2.10.1 | NodehwQosCommonTraps | |||
| 1.3.6.1.4.1.2011.5.2.10.1.0 | NodehwQosCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.5.2.10.1.0.1 | NotificationhwAddRateLimitAclTrap | current | The hwAddRateLimitAclTrap will be sent when the rate limit acl is added. | |
| 1.3.6.1.4.1.2011.5.2.10.1.0.2 | NotificationhwDeleteRateLimitAclTrap | current | The hwDeleteRateLimitAclTrap will be sent when the rate limit acl is deleted. | |
| 1.3.6.1.4.1.2011.5.2.10.1.0.3 | NotificationhwAddPriorityAclTrap | current | The hwAddPriorityAclTrap will be sent when the priority acl is added. | |
| 1.3.6.1.4.1.2011.5.2.10.1.0.4 | NotificationhwDeletePriorityAclTrap | current | The hwDeletePriorityAclTrap will be sent when the priority acl is deleted. | |
| 1.3.6.1.4.1.2011.5.2.10.1.0.5 | NotificationhwAddRedirectAclTrap | current | The hwAddRedirectAclTrap will be sent when the redirect acl is added. | |
| 1.3.6.1.4.1.2011.5.2.10.1.0.6 | NotificationhwDeleteRedirectAclTrap | current | The hwDeleteRedirectAclTrap will be sent when the redirect acl is deleted. | |
| 1.3.6.1.4.1.2011.5.2.10.1.0.7 | NotificationhwAddStatisticAclTrap | current | The hwAddStatisticAclTrap will be sent when the statistic acl added. | |
| 1.3.6.1.4.1.2011.5.2.10.1.0.8 | NotificationhwDeleteStatisticAclTrap | current | The hwDeleteStatisticAclTrap will be sent when the statistic acl is deleted. | |
| 1.3.6.1.4.1.2011.5.2.10.1.0.9 | NotificationhwAddMirrorAclTrap | current | The hwAddMirrorAclTrap will be sent when the mirror acl is added. | |
| 1.3.6.1.4.1.2011.5.2.10.1.0.10 | NotificationhwDeleteMirrorAclTrap | current | The hwDeleteMirrorAclTrap will be sent when the mirror acl is deleted. | |
| 1.3.6.1.4.1.2011.5.2.10.1.0.11 | NotificationhwAclEnableTrafficMirrorTrap | current | The hwAclEnableTrafficMirrorTrap will be sent when the mirror ACL is configured. The first hwFrameIndex, hwSlotIndex and hwPortIndex identify the source port o… | |
| 1.3.6.1.4.1.2011.5.2.10.1.0.12 | NotificationhwAclDisableTrafficMirrorTrap | current | The hwAclDisableTrafficMirrorTrap will be sent when the mirror ACL is cancelled. If hwPortIndex is 255, it means traffic mirror by board. | |
| 1.3.6.1.4.1.2011.5.2.10.2 | NodehwQosAlarmTraps | |||
| 1.3.6.1.4.1.2011.5.2.11 | NodehwMirrorEthHead | |||
| 1.3.6.1.4.1.2011.5.2.11.1 | ScalarhwMirrorEthHeadDMAC | read-write | current | Describes the destination MAC address, which is contained in the Ethernet packet head, added into the mirrored packet. the value obtained is not the boradcast … |
| 1.3.6.1.4.1.2011.5.2.11.2 | ScalarhwMirrorEthHeadSMAC | read-write | current | Describes the source MAC address, which is contained in the Ethernet packet head, added into the mirrored packet. the value obtained is not the boradcast addre… |
| 1.3.6.1.4.1.2011.5.2.11.3 | ScalarhwMirrorEthHeadEthType | read-write | current | Describes the ether type value, which is contained in the Ethernet packet head, added into the mirrored packet. Range: 0-65535 Default value: 0x8100 |
| 1.3.6.1.4.1.2011.5.2.11.4 | ScalarhwMirrorEthHeadVlanID | read-write | current | Describes the vlan Id, which is contained in the Ethernet packet head, added into the mirrored packet. Range: 1-4093 Default value: 1 |
| 1.3.6.1.4.1.2011.5.2.11.5 | ScalarhwMirrorEthHeadProtocolDot1pPriority | read-write | current | Describes the priority of vlan, which is contained in the Ethernet packet head, added into the mirrored packet. Range: 0-7 Default value: 0 |
| 1.3.6.1.4.1.2011.5.2.12 | TablehwOntRateLimitTable | not-accessible | current | Indicates the ONT down stream traffic table. It is used to add, query, modify or delete an ONT down stream traffic table. The indexes of this table are hwOntRa… |
| 1.3.6.1.4.1.2011.5.2.12.1 | RowhwOntRateLimitEntry | not-accessible | current | Indicates the ONT down stream traffic table. It is used to add, query, modify or delete an ONT down stream traffic table. The indexes of this entry are hwOntRa… |
| 1.3.6.1.4.1.2011.5.2.12.1.1 | ColumnhwOntRateLimitIfIndex | not-accessible | current | It is one of the table indexes. Specifies the index of a port for ONT traffic limitation. It uniquely identifies a port. The value and algorithm are the same a… |
| 1.3.6.1.4.1.2011.5.2.12.1.2 | ColumnhwOntRateLimitOntId | not-accessible | current | It is one of the table indexes. Indicates the ONT ID. |
| 1.3.6.1.4.1.2011.5.2.12.1.3 | ColumnhwOntRateLimitDSTrafficTableId | read-create | current | Indicates the down stream traffic table ID. |
| 1.3.6.1.4.1.2011.5.2.12.1.4 | ColumnhwOntRateLimitRowStatus | read-create | current | Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -deliver a traffic table ID to a… |
| 1.3.6.1.4.1.2011.5.2.17 | ScalarhwAclUserSideActionmode | read-write | current | Sets the action mode of user-side ACL of the system. Options: 1. port(1) -indicating port-based action mode of user-side ACL 2. slot(2) -indicating slot-based … |
| 1.3.6.1.4.1.2011.5.2.18 | TablehwAclResourceTable | not-accessible | current | Describes the ACL resources in current system. The indexes of this table are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.5.2.18.1 | RowhwAclResourceEntry | not-accessible | current | Describes the ACL resources in current system. The indexes of this entry are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.5.2.18.1.1 | ColumnhwAclResourceRemainUserAclNum | read-only | current | Describes the number of remaining user rules in the system. |
| 1.3.6.1.4.1.2011.5.2.18.1.2 | ColumnhwAclResourceUserConfigedUserAclNum | read-only | current | Describes the number of user rules configured by users. |
| 1.3.6.1.4.1.2011.5.2.18.1.3 | ColumnhwAclResourceSysUsedUserAclNum | read-only | current | Describes the number of user rules used by the system. |
| 1.3.6.1.4.1.2011.5.2.18.1.4 | ColumnhwAclResourceRemainIpv4AclNum | read-only | current | Describes the number of remaining Ipv4 and Link rules in the system. |
| 1.3.6.1.4.1.2011.5.2.18.1.5 | ColumnhwAclResourceUserConfigedIpv4AclNum | read-only | current | Describes the number of Ipv4 and Link rules configured by users. |
| 1.3.6.1.4.1.2011.5.2.18.1.6 | ColumnhwAclResourceSysUsedIpv4AclNum | read-only | current | Describes the number of Ipv4 and Link rules used by the system. |
| 1.3.6.1.4.1.2011.5.2.18.1.7 | ColumnhwAclResourceRemainIpv6AclNum | read-only | current | Describes the number of remaining Ipv6 rules in the system. |
| 1.3.6.1.4.1.2011.5.2.18.1.8 | ColumnhwAclResourceUserConfigedIpv6AclNum | read-only | current | Describes the number of Ipv6 rules configured by users. |
| 1.3.6.1.4.1.2011.5.2.18.1.9 | ColumnhwAclResourceSysUsedIpv6AclNum | read-only | current | Describes the number of Ipv6 rules used by the system. |
| 1.3.6.1.4.1.2011.5.2.19 | TablehwHQoSModeTable | not-accessible | current | Used to query and modify the HQoS mode of current board. The indexes of this table are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.5.2.19.1 | RowhwHQoSModeEntry | not-accessible | current | Used to query and modify the HQoS mode of current board. The indexes of this entry are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.5.2.19.1.1 | ColumnhwHQoSMode | read-write | current | Describes the HQoS mode of current board. Options: 1. basic(1) -indicates the board HQoS mode is basic. 2. bandwidth(2) -indicates the board HQoS mode is bandw… |
| 1.3.6.1.4.1.2011.5.2.20 | TablehwSubscriberProfileTable | not-accessible | current | Indicates the HQoS subscriber profile table. It is used to add, modify, query, or delete a subscriber profile. The index of this table is hwSubscriberProfileNa… |
| 1.3.6.1.4.1.2011.5.2.20.1 | RowhwSubscriberProfileEntry | not-accessible | current | Indicates the HQoS subscriber profile table. It is used to add, modify, query, or delete a subscriber profile. The index of this entry is hwSubscriberProfileNa… |
| 1.3.6.1.4.1.2011.5.2.20.1.1 | ColumnhwSubscriberProfileName | not-accessible | current | Indicates the name of the HQoS subscriber profile. Range: a string of 1-32 characters The input index consists of the subscriber profile name and the length of… |
| 1.3.6.1.4.1.2011.5.2.20.1.2 | ColumnhwSubscriberProfileOutboundTrafficTableIndex | read-write | current | Indicates the index of the IP traffic table used by downstream packets. Range: 1-1024 The IP traffic table must exist in hwIpTrafficParamTable. -1 indicates un… |
| 1.3.6.1.4.1.2011.5.2.20.1.3 | ColumnhwSubscriberProfileOutboundTrafficTableName | read-write | current | Indicates the name of the IP traffic table used by downstream packets. The IP traffic table must exist in hwIpTrafficParamTable. |
| 1.3.6.1.4.1.2011.5.2.20.1.4 | ColumnhwSubscriberProfileMergeQueueProfileId | read-write | current | Indicates the HQoS merge queue profile ID. 4294967295 indicates unbinding merge queue profile. |
| 1.3.6.1.4.1.2011.5.2.20.1.5 | ColumnhwSubscriberProfileMergeQueueOutboundTrafficTableIndex | read-write | current | Indicates the index of the IP traffic table used by downstream packets. Range: 1-1024 The IP traffic table must exist in hwIpTrafficParamTable. -1 indicates un… |
| 1.3.6.1.4.1.2011.5.2.20.1.6 | ColumnhwSubscriberProfileMergeQueueOutboundTrafficTableName | read-write | current | Indicates the name of the IP traffic table used by downstream packets. The IP traffic table must exist in hwIpTrafficParamTable. |
| 1.3.6.1.4.1.2011.5.2.20.1.7 | ColumnhwSubscriberProfileRowStatus | read-create | current | Indicates the row status. Options: 1. active(1) 2. createAndGo(4) 3. destroy(6) |
| 1.3.6.1.4.1.2011.5.2.21 | TablehwSubscriberTable | not-accessible | current | Indicates the HQoS subscriber table. It is used to add, modify, query, or delete a subscriber. The indexes of this table are hwSubscriberIfIndex, hwSubscriberO… |
| 1.3.6.1.4.1.2011.5.2.21.1 | RowhwSubscriberEntry | not-accessible | current | Indicates the HQoS subscriber table. It is used to add, modify, query, or delete a subscriber. The indexes of this entry are hwSubscriberIfIndex, hwSubscriberO… |
| 1.3.6.1.4.1.2011.5.2.21.1.1 | ColumnhwSubscriberIfIndex | not-accessible | current | It is one of the table indexes. Specifies the index of a port for HQoS subscriber. It uniquely identifies a port. The value and algorithm are the same as those… |
| 1.3.6.1.4.1.2011.5.2.21.1.2 | ColumnhwSubscriberOntId | not-accessible | current | It is one of the table indexes. Indicates the ONT ID. |
| 1.3.6.1.4.1.2011.5.2.21.1.3 | ColumnhwSubscriberId | not-accessible | current | It is one of the table indexes. Indicates the subscriber ID. The subscriber ID is not unique between different ONTs. |
| 1.3.6.1.4.1.2011.5.2.21.1.4 | ColumnhwSubscriberBoundProfileName | read-create | current | Indicates the name of the subscriber profile. The subscriber profile must exist in hwSubscriberProfileTable. |
| 1.3.6.1.4.1.2011.5.2.21.1.5 | ColumnhwSubscriberRowStatus | read-create | current | Indicates the row status. Options: 1. active(1) -indicates the query operation. 2. createAndGo(4) -indicates creating an HQoS subscriber. 3. destroy(6) -indica… |
| 1.3.6.1.4.1.2011.5.2.22 | TablehwSubscriberMemberTable | not-accessible | current | Indicates the HQoS subscriber member table. It is used to add, modify, query, or delete a subscriber member. The indexes of this table are hwSubscriberMemberIf… |
| 1.3.6.1.4.1.2011.5.2.22.1 | RowhwSubscriberMemberEntry | not-accessible | current | Indicates the HQoS subscriber member table. It is used to add, modify, query, or delete a subscriber member. The indexes of this entry are hwSubscriberMemberIf… |
| 1.3.6.1.4.1.2011.5.2.22.1.1 | ColumnhwSubscriberMemberIfIndex | not-accessible | current | It is one of the table indexes. Specifies the index of a port for HQoS subscriber. It uniquely identifies a port. The value and algorithm are the same as those… |
| 1.3.6.1.4.1.2011.5.2.22.1.2 | ColumnhwSubscriberMemberOntId | not-accessible | current | It is one of the table indexes. Indicates the ONT ID. |
| 1.3.6.1.4.1.2011.5.2.22.1.3 | ColumnhwSubscriberMemberGroupId | not-accessible | current | It is one of the table indexes. Indicates the subscriber ID. The subscriber ID is not unique between different ONTs. |
| 1.3.6.1.4.1.2011.5.2.22.1.4 | ColumnhwSubscriberMemberFlowIndex | not-accessible | current | It is one of the table indexes. Indicates the service port index. The service port indicated by this index must exist in hwExtSrvFlowTable. |
| 1.3.6.1.4.1.2011.5.2.22.1.5 | ColumnhwSubscriberMemberOperType | read-write | current | Indicates the operation type. Options: 1. add(1) -Add a service port to a subscriber. 2. del(2) -Delete a service port from a subscriber. To add a service port… |
| 1.3.6.1.4.1.2011.5.2.23 | TablehwMergeQueueProfileTable | not-accessible | current | Indicates the configuration of the HQoS merge queue profile. The index of this table is hwMergeQueueProfileIndex. |
| 1.3.6.1.4.1.2011.5.2.23.1 | RowhwMergeQueueProfileEntry | not-accessible | current | Indicates the configuration of the HQoS merge queue profile. The index of this entry is hwMergeQueueProfileIndex. |
| 1.3.6.1.4.1.2011.5.2.23.1.1 | ColumnhwMergeQueueProfileIndex | not-accessible | current | Indicates the index of the HQoS merge queue profile. |
| 1.3.6.1.4.1.2011.5.2.23.1.2 | ColumnhwMergeQueueProfileStartQueueId | read-write | current | Indicates the start queue ID of the HQoS merge queue. |
| 1.3.6.1.4.1.2011.5.2.23.1.3 | ColumnhwMergeQueueProfileEndQueueId | read-write | current | Indicates the end queue ID of the HQoS merge queue. |
| 1.3.6.1.4.1.2011.5.2.24 | TablehwSubscriberQueueShapingTable | not-accessible | current | Indicates the HQoS subscriber queue shaping table. It is used to add, modify, query, or delete configurations of subscriber queue shaping. The indexes of this … |
| 1.3.6.1.4.1.2011.5.2.24.1 | RowhwSubscriberQueueShapingEntry | not-accessible | current | Indicates the HQoS subscriber queue shaping table. It is used to add, modify, query, or delete configurations of subscriber queue shaping. The indexes of this … |
| 1.3.6.1.4.1.2011.5.2.24.1.1 | ColumnhwSubscriberQueueShapingQueueId | not-accessible | current | Indicates the ID of the queue to be shaped in the HQoS subscriber profile. Range: 0-7 |
| 1.3.6.1.4.1.2011.5.2.24.1.2 | ColumnhwSubscriberQueueShapingDSTrafficIndex | read-write | current | Indicates the index of the IP traffic table referenced by the queue to be shaped in the HQoS subscriber profile. -1 indicates unbinding IP traffic table. |
| 1.3.6.1.4.1.2011.5.2.24.1.3 | ColumnhwSubscriberQueueShapingDSTrafficName | read-write | current | Indicates the name of the IP traffic table used by downstream packets. The IP traffic table must exist in hwIpTrafficParamTable. |
| 1.3.6.1.4.1.2011.5.2.25 | NodehwQosTrapsVbOids | |||
| 1.3.6.1.4.1.2011.5.2.25.1 | ScalarhwAclDirection | accessible-for-notify | current | Indicates the direction for which an ACL rule takes effect. If this leaf object outputs character string 'inbound', it indicates the inbound direction. If this… |
| 1.3.6.1.4.1.2011.5.2.25.2 | ScalarhwAclIpVersion | accessible-for-notify | current | Indicates the type of the ACL rule group. If this leaf object outputs character string 'IPv4', it indicates that an IPv4 ACL rule is used. If this leaf object … |
| 1.3.6.1.4.1.2011.5.2.25.3 | ScalarhwAclSubitem | accessible-for-notify | current | Indicates an ACL rule ID in an ACL rule group. Range: 0-4294967295. If this leaf object outputs the value 4294967295, it indicates all ACL rules in the ACL rul… |
| 1.3.6.1.4.1.2011.5.2.26 | TablehwTrafficBurstDetectInstanceTable | not-accessible | current | Indicates the LQoS traffic burst detection instance table. It is used to add, modify, query, or delete configurations of a traffic burst detection instance. Th… |
| 1.3.6.1.4.1.2011.5.2.26.1 | RowhwTrafficBurstDetectInstanceEntry | not-accessible | current | Indicates the LQoS traffic burst detection instance table. It is used to add, modify, query, or delete configurations of a traffic burst detection instance. Th… |
| 1.3.6.1.4.1.2011.5.2.26.1.1 | ColumnhwTrafficBurstDetectInstanceId | not-accessible | current | Indicates the index of a traffic burst detection Instance. |
| 1.3.6.1.4.1.2011.5.2.26.1.2 | ColumnhwTrafficBurstDetectDirection | read-write | current | Indicates the direction where an ACL rule for traffic burst detection takes effect when the device delivers an ACL rule to a specified port or a specified slot… |
| 1.3.6.1.4.1.2011.5.2.26.1.3 | ColumnhwTrafficBurstDetectPeriod | read-write | current | Indicates the period during which the traffic burst detection takes effect. If this node is not configured, the period during which the traffic burst detection… |
| 1.3.6.1.4.1.2011.5.2.26.1.4 | ColumnhwTrafficBurstDetectThreshold | read-write | current | Indicates the threshold for burst traffic detection. If the burst traffic exceeds this value, a traffic burst record is generated. Range: 64-10240000 kbit/s. U… |
| 1.3.6.1.4.1.2011.5.2.26.1.5 | ColumnhwTrafficBurstDetectFrameIndex | read-write | current | The index of a shelf in the device. |
| 1.3.6.1.4.1.2011.5.2.26.1.6 | ColumnhwTrafficBurstDetectSlotIndex | read-write | current | A slot index is used to identify the location of a board in a shelf. You can locate a board in a shelf according to hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.5.2.26.1.7 | ColumnhwTrafficBurstDetectPortIndex | read-write | current | Port index, indicating the physical number of the port on a board. |
| 1.3.6.1.4.1.2011.5.2.26.1.8 | ColumnhwTrafficBurstDetectIfType | read-write | current | Indicates the type of traffic burst detection. Options: 1.invalid(-1) 2.port(1) 3.linkAggregationGroup(2) 4.protectGroup(3) |
| 1.3.6.1.4.1.2011.5.2.26.1.9 | ColumnhwTrafficBurstDetectOntId | read-write | current | Indicates the ONT ID. |
| 1.3.6.1.4.1.2011.5.2.26.1.10 | ColumnhwTrafficBurstDetectOntPortType | read-write | current | Indicates the ONT port type. Options: 1. invalid(-1) -indicates this parameter is invalid 2. eth(47) -indicates the eth port |
| 1.3.6.1.4.1.2011.5.2.26.1.11 | ColumnhwTrafficBurstDetectOntPortId | read-write | current | Indicates the ONT port ID. |
| 1.3.6.1.4.1.2011.5.2.26.1.12 | ColumnhwTrafficBurstDetectServiceportIndex | read-write | current | Indicats the service port index of traffic burst detection. |
| 1.3.6.1.4.1.2011.5.2.26.1.13 | ColumnhwTrafficBurstDetectUserAclNum | read-write | current | Describes the user-defined ACL rule group that is used when a user-defined ACL rule for traffic burst detection is delivered to a specified port or a specified… |
| 1.3.6.1.4.1.2011.5.2.26.1.14 | ColumnhwTrafficBurstDetectUserAclSubitem | read-write | current | Describes the user-defined ACL rule that is used when a user-defined ACL rule for traffic burst detection is delivered to a specified port or a specified slot.… |
| 1.3.6.1.4.1.2011.5.2.26.1.15 | ColumnhwTrafficBurstDetectIpAclNum | read-write | current | Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for traffic burst detection is delivered to a specified port or a… |
| 1.3.6.1.4.1.2011.5.2.26.1.16 | ColumnhwTrafficBurstDetectIpAclSubitem | read-write | current | Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for traffic burst detection is delivered to a specified port. Range: 0-… |
| 1.3.6.1.4.1.2011.5.2.26.1.17 | ColumnhwTrafficBurstDetectIpv6AclNum | read-write | current | Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for traffic burst detection is delivered to a specified port or a… |
| 1.3.6.1.4.1.2011.5.2.26.1.18 | ColumnhwTrafficBurstDetectIpv6AclSubitem | read-write | current | Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for traffic burst detection is delivered to a specified port. Range: 0-… |
| 1.3.6.1.4.1.2011.5.2.26.1.19 | ColumnhwTrafficBurstDetectLinkAclNum | read-write | current | Describes the L2 ACL rule group that is used when an L2 ACL rule for traffic burst detection is delivered to a specified port or a specified slot. Range: 0, 40… |
| 1.3.6.1.4.1.2011.5.2.26.1.20 | ColumnhwTrafficBurstDetectLinkAclSubitem | read-write | current | Describes the L2 ACL rule that is used when an L2 ACL rule for traffic burst detection is delivered to a specified port or a specified slot. This leaf must be … |
| 1.3.6.1.4.1.2011.5.2.26.1.21 | ColumnhwTrafficBurstDetectInstanceState | read-write | current | Indicates the state of traffic burst detection. Options: 1.active(1) 2.stop(2) 3.idle(3) |
| 1.3.6.1.4.1.2011.5.2.26.1.22 | ColumnhwTrafficBurstDetectStartTime | read-write | current | Indicates the start time of traffic burst detection. If this time is not set, traffic burst detection is enabled immediately by default. |
| 1.3.6.1.4.1.2011.5.2.26.1.23 | ColumnhwTrafficBurstDetectStopTime | read-write | current | Indicates the end time of traffic burst detection. If this time is not set, traffic burst detection lasts all the time. |
| 1.3.6.1.4.1.2011.5.2.26.1.24 | ColumnhwTrafficBurstDetectRowStatus | read-create | current | Row status, used to query, create, modify, and delete a traffic burst detection table. It supports the active(1), createAndGo(4), and destroy(6) operations. Du… |
| 1.3.6.1.4.1.2011.5.2.26.1.25 | ColumnhwTrafficBurstDetectTime | read-write | current | Indicates the duration of traffic burst detection. 0 indicates continuous detection, which does not automatically stop. -1 indicates the duration of traffic bu… |
| 1.3.6.1.4.1.2011.5.2.27 | ScalarhwHQosNoShapingColor | read-write | current | Sets HQoS no shaping object packet color. Options: 1. green(1) -indicates HQoS no shaping object packet color is green 2. yellow(2) -indicates HQoS no shaping … |
| 1.3.6.1.4.1.2011.5.2.28 | ScalarhwHQosNoShapingWrrWeightYellow | read-write | current | Sets HQoS no shaping object yellow packet WRR weight. Range: 0, 1-12 Default: 0 0 indicates yellow WRR weight is not config. |
| 1.3.6.1.4.1.2011.5.2.29 | ScalarhwHQosMulticastColor | read-write | current | Sets HQoS multicast packet color. Options: 1. green(1) -indicates HQoS multicast packet color is green 2. yellow(2) -indicates HQoS multicast packet color is y… |
| 1.3.6.1.4.1.2011.5.2.30 | TablehwPortShapingTable | not-accessible | current | Indicates the port shaping table. It is used to add, modify, query, or delete configurations of port shaping. The index of this table is hwPortShapingIfIndex. |
| 1.3.6.1.4.1.2011.5.2.30.1 | RowhwPortShapingEntry | not-accessible | current | Indicates the port shaping entry. It is used to add, modify, query, or delete configurations of port shaping. The index of this table is hwPortShapingIfIndex. |
| 1.3.6.1.4.1.2011.5.2.30.1.1 | ColumnhwPortShapingIfIndex | not-accessible | current | It is one of the table indexes. Specifies the index of a port for port shaping. It uniquely identifies a port. The value and algorithm are the same as those of… |
| 1.3.6.1.4.1.2011.5.2.30.1.2 | ColumnhwPortShapingOutboundTrafficTableId | read-write | current | Indicates the index of the IP traffic table referenced by the port to be shaped. -1 indicates unbinding IP traffic table. |
| 1.3.6.1.4.1.2011.5.2.30.1.3 | ColumnhwPortShapingOutboundTrafficTableName | read-write | current | Indicates the name of the IP traffic table referenced by the port to be shaped. The IP traffic table must exist in hwIpTrafficParamTable. |
| 1.3.6.1.4.1.2011.5.2.31 | ScalarhwHQosNoShapingWrrWeightGreen | read-write | current | Sets HQoS no shaping object green packet WRR weight. Range: 0, 1-12 Default: 0 0 indicates green WRR weight is not config. |