HUAWEI-VECTOR-MIB
152 objects
This mib is used for defining huawei's vectoring management MIB objects. The MIB is used for vectoring, vectoring is a transmission method that employs the coordination of line signals for reduction of crosstalk levels and improvement of performance.
Imported Objects
| HUAWEI-DEVICE-MIB | hwConfigChangeIP hwFrameIndex hwPortIndex hwSlotIndex |
| HUAWEI-MIB | huaweiUtility |
| HUAWEI-XDSL-COMMON-MIB | hwXdslPortFrequentRetrainControlTimes hwXdslRequestID |
| HUAWEI-XDSL-LINE-TC-MIB | HwXdslDirection |
| IF-MIB | ifIndex |
| SNMPv2-SMI | enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.171 | IdentityhwVectoringMIB | This mib is used for defining huawei's vectoring management MIB objects. The MIB is used for vectoring, vectoring is a transmission method that employs the coo… | ||
| 1.3.6.1.4.1.2011.6.171.1 | NodehwVectoringGlobalConfig | |||
| 1.3.6.1.4.1.2011.6.171.1.1 | ScalarhwVectoringSwitch | read-write | current | Enable/Disable the global vectoring configuration. Warning: this operation will reactivate all the VDSL ports supporting vectoring and may take several minutes… |
| 1.3.6.1.4.1.2011.6.171.1.2 | ScalarhwVectoringLegacyCpeActivatePolicy | read-write | current | Vectoring legacy cpe activate policy. Default values:limit. Options: 1. noLimit(1) - The legacy cpe is allowed to activated in G.993.2 operation mode 2. block(… |
| 1.3.6.1.4.1.2011.6.171.1.3 | ScalarhwVectoringBandplanType | read-write | current | Vectoring global frequency plan types. Default values:bandplan998ade. Options: 1. bandplanAnnexa(1) - The frequency plan types for the vectoring feature is Ann… |
| 1.3.6.1.4.1.2011.6.171.1.4 | ScalarhwVectoringUs0Type | read-write | current | Vectoring us0 type. Default values:us0TypeA. Options: 1. us0TypeA(1) - US0 type is US0-type A 2. us0TypeB(2) - US0 type is US0-type B 3. us0TypeM(3) - US0 type… |
| 1.3.6.1.4.1.2011.6.171.1.5 | ScalarhwVectoringAnnexALimitMask | read-write | current | AnnexA limit mask. Options: 1. d32(1) - AnnexA limit mask is D-32 2. d48(2) - AnnexA limit mask is D-48 3. d64(3) - AnnexA limit mask is D-64 4. d128(4) - Anne… |
| 1.3.6.1.4.1.2011.6.171.1.6 | ScalarhwVectoringLegacyCpeReservedBand | read-write | current | This object is used to set the reserved band of a legacy CPE. The PSD on the frequency band is not shaped and the frequency band can carry traffic. This object… |
| 1.3.6.1.4.1.2011.6.171.1.7 | ScalarhwVectoringLegacyCpeToneBlackoutBand | read-write | current | This object is used to set the blackout band of a legacy CPE. The blackout frequency band is disabled and cannot carry traffic. This object takes effect when h… |
| 1.3.6.1.4.1.2011.6.171.1.8 | ScalarhwVectoringLimitProfDsDataRateProf | read-write | current | The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table, (hwVOPDataRateConfProfTable) that applies to vectoring link when… |
| 1.3.6.1.4.1.2011.6.171.1.9 | ScalarhwVectoringLimitProfUsDataRateProf | read-write | current | The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table, (hwVOPDataRateConfProfTable) that applies to vectoring link when… |
| 1.3.6.1.4.1.2011.6.171.1.10 | ScalarhwVectoringLimitProfChanProf | read-write | current | The value of this object identifies the row in the VDSL2 Channel Configuration Profile Table, (Vdsl2ChanConfProfileTable) that applies to vectoring link when t… |
| 1.3.6.1.4.1.2011.6.171.1.11 | ScalarhwVectoringSingleWireInterruptionDetectionConfig | read-write | current | Enable/Disable the vectoring single-wire interruption detection. Default values:disable. Options: 1. enable(1) - Enables the vectoring detection configuration … |
| 1.3.6.1.4.1.2011.6.171.1.12 | ScalarhwVectoringCableType | read-write | current | Cable type. Default values: atis Options: 1. atis(1) - ATIS 2. quad(2) - Quad 3. paperInsulated(3) - Paper Insulated 4. tp100(4) - TP100 5. other(5) - Other |
| 1.3.6.1.4.1.2011.6.171.1.13 | ScalarhwVectoringLegacyCpeRatio | read-write | current | Legacy CPE ratio. Default values: 0 Options: 0: 1%~15% 1: 15%~25% 2: 25%~50% 3: >50% |
| 1.3.6.1.4.1.2011.6.171.1.14 | ScalarhwVectoringSingleWireInterruptionDectionMeltConfig | read-write | current | Enable/Disable the vectoring melt detection. This parameter must be used together with hwVectoringSingleWireInterruptionDetectionConfig. This parameter is conf… |
| 1.3.6.1.4.1.2011.6.171.1.16 | ScalarhwVectoringErbDetectLevel | read-write | current | The level of detecting ERB(Errorcode Report Bloack) decide that how to judge the valid ERB. Default values: 0 Options: 0: ERB validity detection. 1: ERB validi… |
| 1.3.6.1.4.1.2011.6.171.1.17 | ScalarhwVectoringReinEsDropThresholdDuringJoin | read-write | current | In the joining, when the rate of dropped ES(Errorcode Sample) is larger than the threshold, this line's percode coef don't be calculated and updated. Default v… |
| 1.3.6.1.4.1.2011.6.171.1.18 | ScalarhwVectoringReinEsDropThresholdDuringTrack | read-write | current | In the tracking, when the rate of dropped ES is larger than the threshold, this line's percode coef don't be calculated and updated. Default values: 7 |
| 1.3.6.1.4.1.2011.6.171.1.19 | ScalarhwVectoringLimitProfLineSpectrumProf | read-write | current | The value of this object identifies the row in the XDSL Line Spectrum Configuration Profile Table, (hwVOPLineSpectrumConfProfTable) that applies to vectoring l… |
| 1.3.6.1.4.1.2011.6.171.1.20 | ScalarhwVectoringLimitProfUpboProf | read-write | current | The value of this object identifies the row in the XDSL Upbo Configuration Profile Table, (hwVOPUPBOConfProfTable) that applies to vectoring link when the line… |
| 1.3.6.1.4.1.2011.6.171.1.21 | ScalarhwVectoringVpMode | read-write | current | The value of this object identifies the vector vp-mode. Default values:mode384. Options: 1. mode192(1) - The 192 mode of vectoring board 2. mode384(2) - The 38… |
| 1.3.6.1.4.1.2011.6.171.1.22 | ScalarhwVectoringLongLoopDectionConfig | read-write | current | Enable/Disable the long loop detection. This parameter must be used together with hwVectoringLongLoopPolicy when it is enabled. Default values:disable. Options… |
| 1.3.6.1.4.1.2011.6.171.1.23 | ScalarhwVectoringLongLoopInsertionLoss | read-write | current | The value of this object identifies the long loop insertion loss. This parameter must be used together with hwVectoringLongLoopDectionConfig. This parameter is… |
| 1.3.6.1.4.1.2011.6.171.1.24 | ScalarhwVectoringLongLoopPolicy | read-write | current | The value of this object identifies the long loop policy. This parameter must be used together with hwVectoringLongLoopDectionConfig. This parameter is configu… |
| 1.3.6.1.4.1.2011.6.171.1.25 | ScalarhwVectoringSingleWireInterruptionAutoShaping | read-write | current | Enable/Disable the global vectoring Single Wire Interruption Auto Shaping. This parameter must be used together with hwVectoringSingleWireInterruptionDetection… |
| 1.3.6.1.4.1.2011.6.171.2 | TablehwVectoringGroupTable | not-accessible | current | The table hwVectoringGroupTable contains the vectoring group configuration. The index of this table is hwVectoringGroupIndex. |
| 1.3.6.1.4.1.2011.6.171.2.1 | RowhwVectoringGroupEntry | not-accessible | current | The table hwVectoringGroupTable contains the vectoring group configuration. The index of this entry is hwVectoringGroupIndex. |
| 1.3.6.1.4.1.2011.6.171.2.1.1 | ColumnhwVectoringGroupIndex | not-accessible | current | This object identifies a row in this table. The vectoring group 1 is the default group, can not add and delete. |
| 1.3.6.1.4.1.2011.6.171.2.1.2 | ColumnhwVectoringGroupNotReqBandsUs | read-create | current | This configuration parameter shall be an array of pairs of sub-carrier indices for uptream . Each pair represents the start and stop sub-carrier index of a fre… |
| 1.3.6.1.4.1.2011.6.171.2.1.3 | ColumnhwVectoringGroupNotReqBandsDs | read-create | current | This configuration parameter shall be an array of pairs of sub-carrier indices for downstream . Each pair represents the start and stop sub-carrier index of a … |
| 1.3.6.1.4.1.2011.6.171.2.1.4 | ColumnhwVectoringGroupLinkList | read-create | current | This object defines the link list of the vectoring group. This is a string of 4 bytes of values indicates the port ifindex. It can contain as most as 1024 link. |
| 1.3.6.1.4.1.2011.6.171.2.1.5 | ColumnhwVectoringGroupRowStatus | read-create | current | This object is used to create a new row or delete an existing row in this table. |
| 1.3.6.1.4.1.2011.6.171.2.1.6 | ColumnhwVectoringGroupProtectionOfNotReqBandsDs | read-create | current | This object enable/disable the protection of vectoring lines downstream. This parameter must be used together with hwVectoringGroupNotReqBandsDs. hwVectoringGr… |
| 1.3.6.1.4.1.2011.6.171.2.1.7 | ColumnhwVectoringGroupProtectionOfNotReqBandsUs | read-create | current | This object enable/disable the protection of vectoring lines upstream. This parameter must be used together with hwVectoringGroupNotReqBandsUs. hwVectoringGrou… |
| 1.3.6.1.4.1.2011.6.171.3 | TablehwVectoringConfProfTable | not-accessible | current | The table hwVectoringConfProfTable contains the vectoring profile configuration. A default profile with an index of 'DEFVAL' will always exist and its paramete… |
| 1.3.6.1.4.1.2011.6.171.3.1 | RowhwVectoringConfProfEntry | not-accessible | current | The table hwVectoringConfProfTable contains the vectoring profile configuration. A default profile with an index of 'DEFVAL' will always exist and its paramete… |
| 1.3.6.1.4.1.2011.6.171.3.1.1 | ColumnhwVectoringProfName | accessible-for-notify | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.171.3.1.2 | ColumnhwVectoringEnableUs | read-create | current | Enable/Disable FEXT cancellation control upstream. Default values: enable. Options: 1. enable(1) - Enable FEXT cancellation in the upstream direction from all … |
| 1.3.6.1.4.1.2011.6.171.3.1.3 | ColumnhwVectoringEnableDs | read-create | current | Enable/Disable FEXT cancellation control downstream. Default values: enable. Options: 1. enable(1) - Enable FEXT cancellation in the downstream direction from … |
| 1.3.6.1.4.1.2011.6.171.3.1.4 | ColumnhwVectoringProfRowStatus | read-create | current | This object is used to create a new row or delete an existing row in this table. Before a profile can be deleted, it must be not referenced from all VDSL ports. |
| 1.3.6.1.4.1.2011.6.171.3.1.5 | ColumnhwVectoringProfLegacyCpeActivatePolicy | read-write | current | Vectoring legacy cpe activate policy. Default values:global. Options: 1. noLimit(1) - The legacy cpe is allowed to activated in G.993.2 operation mode 2. block… |
| 1.3.6.1.4.1.2011.6.171.3.1.6 | ColumnhwVectoringProfLegacyCpeReservedBand | read-write | current | This object is used to set the reserved band of a legacy CPE. The PSD on the frequency band is not shaped and the frequency band can carry traffic. This object… |
| 1.3.6.1.4.1.2011.6.171.3.1.7 | ColumnhwVectoringProfLegacyCpeToneBlackoutBand | read-write | current | This object is used to set the blackout band of a legacy CPE. The blackout frequency band is disabled and cannot carry traffic. This object takes effect when h… |
| 1.3.6.1.4.1.2011.6.171.3.1.8 | ColumnhwVectoringConfProfLimitProfDsDataRateProf | read-write | current | The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table, (hwVOPDataRateConfProfTable) that applies to vectoring link when… |
| 1.3.6.1.4.1.2011.6.171.3.1.9 | ColumnhwVectoringConfProfLimitProfUsDataRateProf | read-write | current | The value of this object identifies the row in the XDSL Data Rate Configuration Profile Table, (hwVOPDataRateConfProfTable) that applies to vectoring link when… |
| 1.3.6.1.4.1.2011.6.171.3.1.10 | ColumnhwVectoringConfProfLimitProfChanProf | read-write | current | The value of this object identifies the row in the VDSL2 Channel Configuration Profile Table, (Vdsl2ChanConfProfileTable) that applies to vectoring link when t… |
| 1.3.6.1.4.1.2011.6.171.3.1.11 | ColumnhwVectoringConfVectoringModeCfg | read-write | current | Indicates the access controlling of the type of friendly or vectoring cpe. Bit0 represent vectoring allowed or not allowed,0 represents not allowed,1 represent… |
| 1.3.6.1.4.1.2011.6.171.3.1.12 | ColumnhwVectoringProfCableType | read-write | current | Cable type. Options: 1. atis(1) - ATIS 2. quad(2) - Quad 3. paperInsulated(3) - Paper Insulated 4. tp100(4) - TP100 5. other(5) - Other |
| 1.3.6.1.4.1.2011.6.171.3.1.13 | ColumnhwVectoringProfLegacyCpeRatio | read-write | current | Legacy CPE ratio. Options: 0: 1%~15% 1: 15%~25% 2: 25%~50% 3: >50% |
| 1.3.6.1.4.1.2011.6.171.3.1.14 | ColumnhwVectoringProfDisorderLeavingThreshold | read-write | current | The time between observed loss of US signal and forced cutoff of the DS signal, expressed in DMT symbols. |
| 1.3.6.1.4.1.2011.6.171.3.1.15 | ColumnhwVectoringConfProfLimitProfLineSpectrumProf | read-write | current | The value of this object identifies the row in the XDSL Line Spectrum Configuration Profile Table, (hwVOPLineSpectrumConfProfTable) that applies to vectoring l… |
| 1.3.6.1.4.1.2011.6.171.3.1.16 | ColumnhwVectoringConfProfLimitProfUpboProf | read-write | current | The value of this object identifies the row in the XDSL Upbo Configuration Profile Table, (hwVOPUPBOConfProfTable) that applies to vectoring link when the line… |
| 1.3.6.1.4.1.2011.6.171.3.1.17 | ColumnhwVectoringConfProfGfastFextCanelControlDs | read-write | current | Defines whether FEXT cancellation in the downstream direction from all the other vectoring lines into the G.fast line in the vectoring group is enabled or disa… |
| 1.3.6.1.4.1.2011.6.171.3.1.18 | ColumnhwVectoringConfProfGfastFextCanelControlUs | read-write | current | Defines whether FEXT cancellation in the upstream direction from all the other vectoring lines into the G.fast line in the vectoring group is enabled or disabl… |
| 1.3.6.1.4.1.2011.6.171.4 | TablehwVectoringPortTable | not-accessible | current | The table hwVectoringPortTable contains port configuration about vectoring. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.171.4.1 | RowhwVectoringPortEntry | not-accessible | current | The table hwVectoringPortTable contains port configuration about vectoring. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.171.4.1.1 | ColumnhwVectoringLinkCfgProf | read-write | current | This object configures the vectoring link profile name. |
| 1.3.6.1.4.1.2011.6.171.4.1.2 | ColumnhwVectoringLinkBelongedVceId | read-write | current | The VCE ID uniquely identifies the VCE that manages and controls the vectored group to which the line belongs. It consists of one octet and valid ranges are fr… |
| 1.3.6.1.4.1.2011.6.171.4.1.3 | ColumnhwVectoringLinkVcePortIndex | read-only | current | The VCE port index is the physical index that uniquely identifies the VCE port to which the line is connected. It is an integer from 0 to the maximum number of… |
| 1.3.6.1.4.1.2011.6.171.4.1.4 | ColumnhwVectoringLinkBandPlanCompatible | read-only | current | Options: 1. compatible(1) - The vectoring line configured band plan is compatible with the vectoring band configuration 2. incompatible(2) - The vectoring line… |
| 1.3.6.1.4.1.2011.6.171.4.1.5 | ColumnhwVectoringLinkCPEType | read-only | current | If the port is activated, it is the type of the activated CPE. If the port was activated but is not currently activated, it is the type of previsouly activated… |
| 1.3.6.1.4.1.2011.6.171.4.1.6 | ColumnhwVectoringLinkLegacyPolicyUsed | read-only | current | Vectoring legacy cpe activate policy. Options: 1. noLimit(1) - The legacy cpe is allowed to activated in G.993.2 operation mode 2. block(2) - The legacy cpe is… |
| 1.3.6.1.4.1.2011.6.171.4.1.7 | ColumnhwVectoringLinkFallbackStatus | read-only | current | Options: 1. noFallback(1) - The fall back configuration is not in use, or the line works in vectoring mode or ADSL mode(G.992.x operation mode) 2. fallback(2) … |
| 1.3.6.1.4.1.2011.6.171.4.1.8 | ColumnhwVectoringLinkClearCoefficient | read-write | current | Clear current coefficient and history coefficient. Options: 1. clear(1) - Clear the current coefficient and history coefficient 2. invalidValue(-1) - Invalid v… |
| 1.3.6.1.4.1.2011.6.171.4.1.9 | ColumnhwVectoringLinkLongLoopControlState | read-only | current | Indicates the long loop control state. Options: 1. n(0) - Long loop control state is off 2. y(1) - Long loop control state is on 3. invalidValue(-1) - Invalid … |
| 1.3.6.1.4.1.2011.6.171.4.1.10 | ColumnhwVectoringLinkLongLoopPolicyUsed | read-only | current | Indicates the long loop policy used. Options: 1. nonVectoring(0) - Policy of non-vectoring. If a vectoring port meets long line control requirements, the vecto… |
| 1.3.6.1.4.1.2011.6.171.4.1.11 | ColumnhwVectoringLinkLongLoopControlRemove | read-write | current | Remove the current long loop control. If it is set to true, the control status is removed, and the system returns false upon a reading request. Options: 1. fal… |
| 1.3.6.1.4.1.2011.6.171.5 | TablehwVectoringAutoGroupingTable | not-accessible | current | The table hwVectoringAutoGroupingTable contains the vectoring auto group result. The indexes of this table are hwVectoringGroupIndex and hwVectoringAutoGroupin… |
| 1.3.6.1.4.1.2011.6.171.5.1 | RowhwVectoringAutoGroupingEntry | not-accessible | current | The table hwVectoringAutoGroupingTable contains the vectoring auto group result. The indexes of this entry are hwVectoringGroupIndex and hwVectoringAutoGroupin… |
| 1.3.6.1.4.1.2011.6.171.5.1.1 | ColumnhwVectoringAutoGroupingGroupIndex | not-accessible | current | This object identifies auto group index. |
| 1.3.6.1.4.1.2011.6.171.5.1.2 | ColumnhwVectoringAutoGroupingGroupLinkList | read-only | current | This object defines the link list of the vectoring auto group. This is a string of 4 bytes of values indicates the port ifindex. It can contain as most as 1024… |
| 1.3.6.1.4.1.2011.6.171.6 | TablehwVectoringCrosstalkCouplingMatrixTable | not-accessible | current | The table hwVectoringCrosstalkCouplingMatrixTable contains information of vectoring crosstalk coupling matrix about a port in a vectoring group. The indexes of… |
| 1.3.6.1.4.1.2011.6.171.6.1 | RowhwVectoringCrosstalkCouplingMatrixEntry | not-accessible | current | The table hwVectoringCrosstalkCouplingMatrixTable contains information of vectoring crosstalk coupling matrix about a port in a vectoring group. The indexes of… |
| 1.3.6.1.4.1.2011.6.171.6.1.1 | ColumnhwVectoringCrosstalkCouplingMatrixDirection | accessible-for-notify | current | The direction of the vectoring crosstalk coupling matrix either upstream or downstream. |
| 1.3.6.1.4.1.2011.6.171.6.1.2 | ColumnhwVectoringCrosstalkCoupingMatrixOperType | read-write | current | This object is used to start the vectoring crosstalk coupling matrix. Options: 1. start(1) - start the vectoring crosstalk coupling matrix 2. stop(2) - stop th… |
| 1.3.6.1.4.1.2011.6.171.6.1.3 | ColumnhwVectoringCrosstalkCoupingMatrixOperResult | accessible-for-notify | current | This object identifies the crosstalk coupling matrix operation result. Options: 1. normal(1) - The crosstalk coupling matrix operation result is normal. 2. fai… |
| 1.3.6.1.4.1.2011.6.171.6.1.4 | ColumnhwVectoringCrosstalkCouplingMatrixPortIfindexList | read-only | current | Ifindex list of port that effect another port in the same vectoring group. This is a string of 4 bytes of values indicates the port ifindex. |
| 1.3.6.1.4.1.2011.6.171.6.1.5 | ColumnhwVectoringCrosstalkCouplingMatrixAverageMagnitudeList | read-only | current | In this matrix must be seen all vectoring subscribers with disturberline. This is a string of 4 bytes of values indicates the port average magnitude. The units… |
| 1.3.6.1.4.1.2011.6.171.6.1.6 | ColumnhwVectoringCrosstalkCouplingMatrixCancellationStatusList | read-only | current | Indicates whether the impact on the port caused by a disturber port is canceled. The connected link of each port is 1 bit, and the connected link IDs of all th… |
| 1.3.6.1.4.1.2011.6.171.6.1.7 | ColumnhwVectoringCrosstalkCouplingMatrixPortLocationList | read-only | current | Indicates the connected link ID list of the device where the disturber ports locate. The connected link of each port is 1 bit. The byte value indicates: 1. loc… |
| 1.3.6.1.4.1.2011.6.171.7 | TablehwVectoringBoardVectoringStateTable | not-accessible | current | The table hwVectoringBoardVectoringStateTable contains the vectoring current running information. The indexes of this table are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.171.7.1 | RowhwVectoringBoardVectoringStateEntry | not-accessible | current | The table hwVectoringBoardVectoringStateTable contains the vectoring current running information. The indexes of this entry are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.171.7.1.1 | ColumnhwVectoringVpVectoringInterfaceState | read-only | current | The object indicates VCE vectoring interface state. Options: 1. down(1) - vectoring interface state is abnormal 2. up(2) - vectoring interface state is normal … |
| 1.3.6.1.4.1.2011.6.171.7.1.2 | ColumnhwVectoringVdslVectoringInterfaceState | read-only | current | The object indicates VDSL vectoring interface state. Options: 1. down(1) - vectoring interface state is abnormal 2. up(2) - vectoring interface state is normal… |
| 1.3.6.1.4.1.2011.6.171.7.1.3 | ColumnhwVectoringVdslVectoringSyncState | read-only | current | The object indicates Sync state between VCE and VDSL vectoring interface. Options: 1. noSync(1) - communication between VCE and VDSL is abnormal 2. sync(2) - c… |
| 1.3.6.1.4.1.2011.6.171.8 | NodehwVectoringTraps | |||
| 1.3.6.1.4.1.2011.6.171.8.1 | NodehwVectoringAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.171.8.1.1 | NodehwVectoringAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.171.8.1.1.1 | NotificationhwVectoringFaultAlarmTrap | current | This notification indicates that the vectoring service on the board fails. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.2 | NotificationhwVectoringRecoveryAlarmTrap | current | This notification indicates that the vectoring service on the board recovers. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.3 | NotificationhwVectoringVictCoefAbnormalVariationAlarmTrap | current | This notification indicates that the port receives abnormal crosstalk from other ports. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.4 | NotificationhwVectoringDistCoefAbnormalVariationAlarmTrap | current | This notification indicates that the port causes abnormal crosstalk to other ports. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.5 | NotificationhwVectoringReceivedESAbnormalAlarmTrap | current | This notification indicates that the port receives abnormal error sample messages. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.6 | NotificationhwXdslLegacyCpeActivatedAlarmTrap | current | This notification indicates that the port is activated in none-vectoring mode. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.7 | NotificationhwXdslFrequentlyRetrainTimesReachThresholdAlarmTrap | current | This notification indicates that the port frequently retrain times in 15 minutes reach the threshold. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.8 | NotificationhwVectoringReceivedESRecoverAlarmTrap | current | This notification indicates that the port error sample feedback recovers. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.9 | NotificationhwVectoringPSConfigAbnormalAlarmTrap | current | This notification indicates that port pilot sequence config abnormal messages. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.10 | NotificationhwVectoringPSConfigRecoverAlarmTrap | current | This notification indicates that the port pilot sequence config recovers. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.11 | NotificationhwVectoringLegacyCpeActivationAlarmTrap | current | This notification indicates that the port is activated in none-vectoring mode. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.12 | NotificationhwVectoringLegacyCpeActivationRecoveryTrap | current | This notification indicates that the port is activated in vectoring mode. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.13 | NotificationhwVectoringServiceFaultAlarmTrap | current | This notification indicates that the vectoring service in the system fails. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.14 | NotificationhwVectoringServiceRecoveryTrap | current | This notification indicates that the vectoring service in the system recovers. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.15 | NotificationhwVectoringSingleWireInterruptionAlarmTrap | current | This notification indicates that the single-wire on the port is disconnected. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.16 | NotificationhwVectoringSingleWireInterruptionRecoveryTrap | current | This notification indicates that the single-wire on the port is re-connected. | |
| 1.3.6.1.4.1.2011.6.171.8.1.1.17 | Notificationhwvdsl2FrequentlyRetrainReachFurtherControlThresholdAlarmTrap | current | This notification indicates that the port frequent retrain times in the detect period reach the further control threshold. | |
| 1.3.6.1.4.1.2011.6.171.8.2 | NodehwVectoringCommonTraps | |||
| 1.3.6.1.4.1.2011.6.171.8.2.1 | NodehwVectoringCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.171.8.2.1.1 | NotificationhwVectoringGlobalConfigChangeTrap | current | This notification indicates that the vectoring global configuration is changed. | |
| 1.3.6.1.4.1.2011.6.171.8.2.1.2 | NotificationhwVectoringCrosstalkCoupingMatrixOperResultTrap | current | This notification indicates that the vectoring crosstalk coupling matrix calculation result. | |
| 1.3.6.1.4.1.2011.6.171.8.2.1.3 | NotificationhwVectoringXlinChangeTrap | current | This notification indicates that the xlin is changed. | |
| 1.3.6.1.4.1.2011.6.171.8.2.1.4 | NotificationhwVectoringProfChangeTrap | current | This notification indicates that the vectoring profile configuration is changed. | |
| 1.3.6.1.4.1.2011.6.171.8.2.1.5 | NotificationhwVectoringProfIDChangeTrap | current | This notification indicates that the port's vectoring profile configuration is changed. | |
| 1.3.6.1.4.1.2011.6.171.8.2.1.6 | NotificationhwVectoringVceRunInfoCollectTrap | current | This trap is generated when vectoring running information collection is complete. | |
| 1.3.6.1.4.1.2011.6.171.9 | NodehwVectoringFastJoinConfig | |||
| 1.3.6.1.4.1.2011.6.171.9.1 | ScalarhwVectoringGainPhase | read-write | current | This object is used to set the mode for obtaining the vectoring gain during port activation. Default values:atInit. Options: 1. atInit(1) - The vectoring gain … |
| 1.3.6.1.4.1.2011.6.171.9.2 | ScalarhwVectoringTriggerAfterBoardReset | read-write | current | The vectoring gain is not obtained during port activation in board reset, but obtained during tracking in SRA. Default values:enable. Options: 1. enable(1) - E… |
| 1.3.6.1.4.1.2011.6.171.9.3 | ScalarhwVectoringTriggerDuringBulkNum | read-write | current | The vectoring gain achieved in showtime when the number of ports join in at a time exceeds the configured bulk init number. It ranges from 2 to 256. The invali… |
| 1.3.6.1.4.1.2011.6.171.9.4 | ScalarhwVectoringJoinMaxWaitTime | read-write | current | This object is used to set the total time for a joined port to wait for other ports in the batch to join. Default values:15. |
| 1.3.6.1.4.1.2011.6.171.9.5 | ScalarhwVectoringJoinGapWaitTime | read-write | current | This object is used to set the interval for a joined port to wait for a single port in the batch to join. Default values:5. |
| 1.3.6.1.4.1.2011.6.171.9.6 | ScalarhwVectoringTrackingPeriod | read-write | current | Vectoring tracking period. Default values:30. |
| 1.3.6.1.4.1.2011.6.171.9.7 | ScalarhwVectoringHistoryCoefficient | read-write | current | This object is used to set whether to use a historical coefficient. Default values:both. Options: 1. disable(1) - Indicates that a historical coefficient is no… |
| 1.3.6.1.4.1.2011.6.171.9.8 | ScalarhwVectoringJoinFdps | read-write | current | The vectoring frequency dependent pilot sequence configuration. Default values:disable. Options: 1. disable(1) - Indicates that the frequency dependent pilot s… |
| 1.3.6.1.4.1.2011.6.171.9.9 | ScalarhwVectoringHistoryCoefficientClear | read-write | current | The vectoring coefficient clear mode. Default values:noClear. Options: 1. noClear(1) - Do not clean up history coefficient 2. clearWhenWrong(2) - When detectin… |
| 1.3.6.1.4.1.2011.6.171.10 | NodehwVectoringTrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.171.10.1 | ScalarhwVectoringPortFrequentRetrainTimes | accessible-for-notify | current | The times that Xdsl port frequent retrain in 15 minutes. |
| 1.3.6.1.4.1.2011.6.171.10.2 | ScalarhwVectoringProfOperType | accessible-for-notify | current | Vectoring profile operate type. Options: 1.add(1) - Add a vectoring profile 2.modify(2) - Modify a vectoring profile 3.delete(3) - Delete a vectoring profile |
| 1.3.6.1.4.1.2011.6.171.10.3 | ScalarhwVectoringVceRunInfoCollectResult | accessible-for-notify | current | Indicates the status of vectoring running information collection. Options: 1. noFail(0) - Vectoring running information has been collected successfully. 2. mem… |
| 1.3.6.1.4.1.2011.6.171.10.4 | ScalarhwVectoringPortList | accessible-for-notify | current | This node is a list of ports activated in vectoring mode in the entire subrack. In the reported port list, first two bytes represent the number of boards that … |
| 1.3.6.1.4.1.2011.6.171.10.5 | Scalarhwxdsl2FrequentlyRetrainReachFurtherControlTime | accessible-for-notify | current | The trigger time when the port frequent retrain times in the detect period reach the further control threshold. |
| 1.3.6.1.4.1.2011.6.171.10.6 | Scalarhwxdsl2FrequentlyRetrainReachFurtherControlPolicy | read-write | current | Further control policy for frequent retrain. Values are as follows: Permanent-lock: indicates that activation is permanently disabled in any mode. Permanent-no… |
| 1.3.6.1.4.1.2011.6.171.11 | TablehwVectoringNlvTable | not-accessible | current | The table hwVectoringNlvTable contains status parameters of node level vectoring. The index of this table is hwVectoringNlvPeerId. |
| 1.3.6.1.4.1.2011.6.171.11.1 | RowhwVectoringNlvEntry | not-accessible | current | The table hwVectoringNlvTable contains status parameters of node level vectoring. The index of this entry is hwVectoringNlvPeerId. |
| 1.3.6.1.4.1.2011.6.171.11.1.1 | ColumnhwVectoringNlvPeerId | not-accessible | current | The value of this object identifies the node level vectoring peer equipment. |
| 1.3.6.1.4.1.2011.6.171.11.1.2 | ColumnhwVectoringNlvStatus | read-only | current | Indicates current status of node level vectoring. This is a bit-map of possible conditions. The various bit positions are: 1. noDefect(0) - This bit position p… |
| 1.3.6.1.4.1.2011.6.171.11.1.3 | ColumnhwVectoringNlvPeerEquipmentSysMac | read-only | current | A 6-octet read-only value carrying the individual MAC address of the node level vectoring peer equipment. |
| 1.3.6.1.4.1.2011.6.171.12 | NodehwVectoringXlinMonitorTable | |||
| 1.3.6.1.4.1.2011.6.171.12.1 | ScalarhwVectoringXlinMonitorEnable | read-write | current | Enable/Disable the vectoring xlin changing monitor functionality. Default values:disable. Options: 1. enable(1) - Enable the vectoring xlin changing monitor fu… |
| 1.3.6.1.4.1.2011.6.171.13 | TablehwVectoringVceRunInfoCollectTable | not-accessible | current | Indicates the configuration of vectoring running information collection. The indexes of this table are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.171.13.1 | RowhwVectoringVceRunInfoCollectEntry | not-accessible | current | Indicates the configuration of vectoring running information collection. The indexes of this entry are hwFrameIndex and hwSlotIndex. |
| 1.3.6.1.4.1.2011.6.171.13.1.1 | ColumnhwVectoringVceRunInfoCollectType | read-write | current | The leaf is used to set the vectoring running information collection type. Options: 1. crosstalkmatrix(1) - Collect information about crosstalk matrix for vect… |
| 1.3.6.1.4.1.2011.6.171.13.1.2 | ColumnhwVectoringVceRunInfoCollectStart | read-write | current | The leaf is used to start vectoring running information collection. Options: 1. start(1) - Start to collect vectoring running information. 2. invalid(-1) - Inv… |
| 1.3.6.1.4.1.2011.6.171.13.1.3 | ColumnhwVectoringVceRunInfoCollectState | read-only | current | Indicates the status of vectoring running information collection. Options: 1. nocollect(1) - The collection does not start. 2. collecting(2) - The colleciton i… |
| 1.3.6.1.4.1.2011.6.171.13.1.4 | ColumnhwVectoringVceRunInfoCollectTimes | read-write | current | Indicates vectoring running information collection times. 4294967295 represents invalid value. |
| 1.3.6.1.4.1.2011.6.171.13.1.5 | ColumnhwVectoringVceRunInfoCollectInterval | read-write | current | Indicates the interval at which vectoring running information is collected. 4294967295 represents invalid value. |
| 1.3.6.1.4.1.2011.6.171.13.1.6 | ColumnhwVectoringVceRunInfoCollectCurrentTime | read-only | current | Indicates the time at which vectoring running information is collected. |
| 1.3.6.1.4.1.2011.6.171.13.1.7 | ColumnhwVectoringVceRunInfoCollectAlgoParaVictimPort | read-write | current | Indicates the ifindex of the victim port. -1 represents invalid value. |
| 1.3.6.1.4.1.2011.6.171.13.1.8 | ColumnhwVectoringVceRunInfoCollectAlgoParaDisturberLocation | read-write | current | Indicates the connected link ID list of the device where the disturber ports locate. Options: 1. local(1) - Local device 2. peer(2) - Peer device 3. invalid(-1… |
| 1.3.6.1.4.1.2011.6.171.13.1.9 | ColumnhwVectoringVceRunInfoCollectAlgoParaDisturberPort | read-write | current | Indicates the ifindex of the disturber port. -1 represents invalid value. |
| 1.3.6.1.4.1.2011.6.171.13.1.10 | ColumnhwVectoringVceRunInfoCollectRequestId | read-write | current | The vce run info collect request ID, which identifies a collect request delivered by the NMS. An collect request ID can be any unsigned integer in the range of… |
| 1.3.6.1.4.1.2011.6.171.14 | NodehwVectoringVceRunInfoKeyRecordTable | |||
| 1.3.6.1.4.1.2011.6.171.14.1 | ScalarhwVectoringVceRunInfoKeyRecordPortList | read-write | current | Indicates the key record port list of vectoring run info. |