IBM-LES-BUS-MIB
58 objects
No module-level DESCRIPTION found.
Imported Objects
| LAN-EMULATION-CLIENT-MIB | AtmLaneAddress |
| LAN-EMULATION-LES-MIB | lesConfEntry lesConfIndex |
| NWAYSMSS-MIB | AtmPrivateAddrEsi AtmSelector AtmVccTrafficType Bandwidth mssServerLanE |
| RFC-1212 | OBJECT-TYPE |
| SNMPv2-SMI-v1 | Counter32 |
| SNMPv2-TC-v1 | MacAddress TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.118.1.2.1.1 | NodeibmLesBusMIB | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1 | NodeibmLesBusConfGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1 | TableibmLesBusConfTable | not-accessible | mandatory | This table contains configuration information for the LESs within the scope of the agent. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1 | RowibmLesBusConfEntry | not-accessible | mandatory | Each entry in this table represents a LES. The parameters in each entry apply to one emulated LAN served by one LES. Objects lesLanType and lesMaxFrameSize are… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.1 | ColumnatmDevNum | read-write | mandatory | Identifies ATM device to be used by LES/BUS. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.2 | ColumnuseBurnedInEsi | read-write | mandatory | Specifies whether a MAC Address burned into the ATM device should be used as the End System Identifier component of the LES/BUS ATM Address. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.3 | ColumnconfiguredEsi | read-only | mandatory | Locally Administered End System Identifier that is to be used as the ESI component of the LES/BUS ATM Address. If this object is used do not use the ATM Forum … |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.4 | ColumnconfiguredSelector | read-only | mandatory | Specifies value to be used as Selector field component of LES/BUS ATM Address. If this object is used do not use the ATM Forum elanLecAtmMask. If both are used… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.5 | ColumnleArpResponseDest | read-write | mandatory | When the value is ALL_CLIENTS, LE_ARP_RESPONSE frames initiated or forwarded by the LES are sent to all clients on the Point-to-Multipoint Control Distribute V… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.6 | Columnuse2ControlDistributeVccs | read-write | mandatory | When TRUE, proxy clients are placed on one Point-to-Multipoint Control Distribute VCC and all other clients are placed on another Point-to-Multipoint Control D… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.7 | Columnuse2MulticastForwardVccs | read-write | mandatory | When TRUE: - proxy clients are placed on one Point-to-Multipoint Multicast Forward VCC and all other clients are placed on another Point-to-Multipoint Multicas… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.8 | ColumnvalidateBestEffortPcr | read-write | mandatory | When false, Best Effort Control Direct or Multicast Send VCCs will be accepted without regard to the signalled forward Peak Cell Rate (PCR). When true, Best Ef… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.9 | ColumncontrolDirectMaxReservedBw | read-write | mandatory | Defines the maximum acceptable Sustained Cell Rate (SCR) for a Control Direct VCC; if SCR is not specified on the incoming call, then this parameter defines th… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.10 | ColumnmulticastSendMaxReservedBw | read-write | mandatory | Defines the maximum acceptable Sustained Cell Rate (SCR) for a Multicast Send VCC; if SCR is not specified on the incoming call, then this parameter defines th… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.11 | ColumncontrolDistributeVccType | read-write | mandatory | Specifies type of traffic characteristics to be associated with Control Distribute VCC(s). Bandwidth is not reserved for best effort traffic. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.12 | ColumncontrolDistributePcr | read-write | mandatory | Specifies the Peak Cell Rate (PCR) Traffic Parameter for the Control Distribute VCC(s). Since the Control Distribute is a point-to-multipoint VCC, the specifie… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.13 | ColumncontrolDistributeScr | read-write | mandatory | Specifies the Sustained Cell Rate (SCR) Traffic Parameter for the Control Distribute VCC(s). Since the Control Distribute is a point-to-multipoint VCC, the spe… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.14 | ColumnmulticastForwardVccType | read-write | mandatory | Specifies type of traffic characteristics to be associated with Multicast Forward VCC(s). Bandwidth is not reserved for best effort traffic. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.15 | ColumnmulticastForwardPcr | read-write | mandatory | Specifies the Peak Cell Rate (PCR) Traffic Parameter for the Multicast Forward VCC(s). Since the Multicast Multicast Forward is a point-to-multipoint VCC, the … |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.16 | ColumnmulticastForwardScr | read-write | mandatory | Specifies the Sustained Cell Rate (SCR) Traffic Parameter for the Multicast Forward VCC(s). Since the Multicast Forward is a point-to-multipoint VCC, the speci… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.17 | ColumnvalidateJoinsWithLecs | read-write | mandatory | Specifies whether clients that attempt to join the ELAN must be validated by the LECS. The default value is taken from the corresponding object in the ELAN MIB… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.18 | ColumnredundancyEnabled | read-write | mandatory | Redundancy support allows clients to be assigned to a backup LES/BUS in the event that the primary LES/BUS for the ELAN fails. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.19 | ColumnredundancyRole | read-write | mandatory | Redundancy Protocol Role. Specifies whether this LES/BUS instance is to serve as the primary or backup LES/BUS for the ELAN. This object is only valid when red… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.20 | ColumnredundancyAtmAddr | read-write | mandatory | ATM Address of Backup LES/BUS. Specifies the ATM address of the backup LES/BUS for the ELAN. Currently, only the private address formats defined by the ATM For… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.21 | ColumnbmonEnabled | read-write | mandatory | Enable BUS Monitor for ELAN. When TRUE, host usage of the Broadcast and Unknown Server is monitored. Periodic sampling is performed to provide information on t… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.22 | ColumnnumTopMacs | read-write | mandatory | Number of Top MAC Addresses to Record. Specifies the number of MACs to be recorded with the highest quantity of sampled frames sent to the BUS in a sample inte… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.23 | ColumnsampleDuration | read-write | mandatory | Number of seconds in each Sample Interval. Specifies the number of seconds in each BUS Monitor sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.24 | ColumninterSampleTime | read-write | mandatory | Minutes between start of one sample and the next sample. Specifies the number of minutes between the start of one BUS Monitor sample interval and the start of … |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.25 | ColumnsampleRate | read-write | mandatory | Specifies the rate at which the BUS Monitor samples frames sent to the BUS during a sample interval. A value of 1 indicates that every frame sent to the BUS is… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.26 | ColumnbusMode | read-write | mandatory | With the Fast Bus Feature the BUS can run now run in one of three modes: systemBusMode(1) - Frames from BUS are buffered into system memory. All intelligent BU… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.2 | NodeibmLesBusStatGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1 | TableibmLesBusStatTable | not-accessible | mandatory | This table contains all counters ???. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1 | RowibmLesBusStatEntry | not-accessible | mandatory | Each entry in this table contains a LES and its counters. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.1 | ColumnredundancyVccRefused | read-only | mandatory | Number of Redundancy VCC call setup requests rejected by the LES for any reason. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.2 | ColumnredundancyVccReleased | read-only | mandatory | Number of times a Redundancy VCC has been released by LEC/network for any reason. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.3 | ColumnredundancyVccFailure | read-only | mandatory | Number of Redundancy VCC requests made by LES that failed. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3 | NodeibmBusMonStatGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1 | TablebmonSampleInfoTable | not-accessible | mandatory | This table contains the BUS Monitor (BMON) information for the last complete sample processed. The following information is maintained for each BUS instance us… |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1 | RowbmonSampleInfoEntry | not-accessible | mandatory | Each entry in this table contains BMON information for the last complete sample processed for a specific BUS instance. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.1 | ColumnbmonSampleStartTime | read-only | mandatory | Timestamp for the start of the last complete BUS Monitor sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.2 | ColumnbmonSampleDuration | read-only | mandatory | Duration of the last complete sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.3 | ColumnbmonNumTopMacs | read-only | mandatory | The number of top hosts actually recorded during the last complete sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.4 | ColumnbmonReceivedFrames | read-only | mandatory | The total number of frames received during the last complete sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.5 | ColumnbmonSampledFrames | read-only | mandatory | The number of frames actually sampled during the last complete sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.6 | ColumnbmonSamplingRate | read-only | mandatory | The frame sampling rate given as N where the rate is 1 out of every N frames will be sampled. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2 | TablebmonStatTable | not-accessible | mandatory | This table contains the BUS Monitor (BMON) counters for the top N heaviest users of a BUS (i.e., the N MAC addresses that originate the most data frames. Each … |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1 | RowbmonStatEntry | not-accessible | mandatory | Each entry in this table contains BMON statistics for the top users of the indicated BUS instance. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.1 | ColumnbmonTopNRank | read-only | mandatory | Rank for the indicated host (i.e., MAC address) given as N where 1 is the host originating the most frames. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.2 | ColumnbmonTopNSrcMacAddr | read-only | mandatory | Source MAC Address for this host. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.3 | ColumnbmonTopNLecAtmAddr | read-only | mandatory | Associated LEC ATM Address for this host. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.4 | ColumnbmonTopNFramesSampled | read-only | mandatory | Number of frames sampled from this host during last complete sample interval. |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4 | NodeibmLesBusMIBConformance | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4.1 | NodeibmLesBusMIBGroups | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4.1.1 | NodeibmLesBusCConfGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4.1.2 | NodeibmLesBusCStatGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4.1.3 | NodeibmBusMonCStatGroup | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4.2 | NodeibmLesBusMIBCompliances | |||
| 1.3.6.1.4.1.2.6.118.1.2.1.1.4.2.1 | NodeibmLesBusMIBCompliance |