Juniper-UNI-ATM-MIB
426 objects
The ATM MIB for the Juniper enterprise.
Imported Objects
| ATM-FORUM-SNMP-M4-MIB | atmfM4VcTestCode atmfM4VcTestId atmfM4VcTestObject atmfM4VcTestResult atmfM4VcTestType atmfM4VpTestCode atmfM4VpTestId atmfM4VpTestObject atmfM4VpTestResult atmfM4VpTestType |
| ATM-MIB | atmVclVci atmVclVpi atmVplVpi |
| ATM-TC-MIB | AtmAddr AtmVcIdentifier AtmVorXAdminStatus AtmVpIdentifier |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| Juniper-MIBs | juniMibs |
| Juniper-TC | JuniEnable JuniInterfaceLocationType JuniInterfaceLocationValue JuniNextIfIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.8 | IdentityjuniAtmMIB | The ATM MIB for the Juniper enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.8.1 | NodejuniAtmObjects | |||
| 1.3.6.1.4.1.4874.2.2.8.1.1 | NodejuniAtmIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.8.1.1.1 | ScalarjuniAtmNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniAtmIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry … |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2 | TablejuniAtmIfTable | not-accessible | current | This table contains entries for ATM interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1 | RowjuniAtmIfEntry | not-accessible | current | Each entry describes the characteristics of an ATM interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in if… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.1 | ColumnjuniAtmIfIndex | not-accessible | current | The ifIndex of the ATM interface. When creating entries in this table, suitable values for this object are determined by reading juniAtmNextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.2 | ColumnjuniAtmIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.3 | ColumnjuniAtmIfLowerIfIndex | read-create | current | The ifIndex of an interface over which this ATM interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.4 | ColumnjuniAtmIfIlmiVpi | read-create | current | The VPI of the ILMI of a major ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.5 | ColumnjuniAtmIfIlmiVci | read-create | current | The VCI of the ILMI of a major ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.6 | ColumnjuniAtmIfIlmiVcd | read-create | current | An integer identifier for the ILMI, used in conjunction with the command-line interface. The value must be unique among VCs configured on the same ATM interfac… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.7 | ColumnjuniAtmIfIlmiPollFrequency | read-create | current | The amount of time in seconds between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The d… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.8 | ColumnjuniAtmIfIlmiAdminState | read-create | current | The administrative status of ILMI in the ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.9 | ColumnjuniAtmIfUniVersion | read-create | current | Use to specify the User Network Interface (UNI) the router should use when ILMI link auto determination is unsuccesful or ILMI is disabled. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.10 | ColumnjuniAtmIfOamCellRxAdminState | read-create | current | Use to specify the OAM Cell Receive Administrative state on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.11 | ColumnjuniAtmIfInCells | read-only | current | The total number of cells received on this major interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.12 | ColumnjuniAtmIfOutCells | read-only | current | The total number of cells transmitted on this major interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.13 | ColumnjuniAtmIfVcCount | read-only | current | The total number of circuits configured on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.14 | ColumnjuniAtmIfMapGroup | read-create | current | The NBMA map group this interface is associated with. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.15 | ColumnjuniAtmIfCacAdminState | read-create | current | The administrative staus of CAC on this ATM major interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.16 | ColumnjuniAtmIfCacUbrWeight | read-create | current | The bandwidth associated with every UBR and UBR with PCR connection configured on the ATM major interface. This value is used for CAC computation. The units ar… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.17 | ColumnjuniAtmIfCacSubscriptionBandwidth | read-create | current | The subscribed bandwidth of the ATM major interface. If this value is not specified or set to 0, the effective port bandwidth is used. When a Get operation is … |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.18 | ColumnjuniAtmIfCacAvailableBandwidth | read-only | current | The available bandwidth in Tx direction of the ATM major interface. As connections are added or deleted on the interface, this value is updated. The units are … |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.19 | ColumnjuniAtmIfCacAvailableBandwidthRx | read-only | deprecated | The available bandwidth in Rx direction of the ATM major interface. As connections are added or deleted on the interface, this value is updated. The units are … |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.20 | ColumnjuniAtmIfE164Autoconversion | read-create | obsolete | The status of E164 autoconversion feature in the ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.21 | ColumnjuniAtmIfE164Gateway | read-create | obsolete | The status of E164 gateway feature in the ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.22 | ColumnjuniAtmIfE164OneToOneAddrTrans | read-create | obsolete | The status of E164 one-to-one address translation feature in the ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.23 | ColumnjuniAtmIfOamCellFilter | read-create | current | The type of OAM cells to discard when juniAtmIfOamCellRxAdminState is set to oamCellAdminStateDisabled. The value oamCellFilterAlarm discards received OAM AIS … |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.24 | ColumnjuniAtmIfCacUsedBandwidthUpper | read-only | current | The most significant 32 bits of the CAC used bandwidth on the ATM major interface. The least significant 32 bits of the CAC used bandwidth are specified by jun… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.25 | ColumnjuniAtmIfCacUsedBandwidthLower | read-only | current | The least significant 32 bits of the CAC used bandwidth on the ATM major interface. The most significant 32 bits of the CAC used bandwidth are specified by jun… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.26 | ColumnjuniAtmIfAssociatedVcClassId | read-create | current | The integer identifier of the ATM VC class associated with this ATM interface. A value for this identifier is determined by locating or creating an ATM VC clas… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3 | TablejuniAtmPvcStatisticsTable | not-accessible | current | This table contains statistics for PVC entries. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1 | RowjuniAtmPvcStatisticsEntry | not-accessible | current | Each entry provides statistics on an ATM PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.1 | ColumnjuniAtmPvcStatsIfIndex | not-accessible | current | The ifIndex of the ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.2 | ColumnjuniAtmPvcStatsVpi | not-accessible | current | The VPI of the ATM VCC used by this ATM interface and PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.3 | ColumnjuniAtmPvcStatsVci | not-accessible | current | The VCI of the ATM VCC used by this ATM interface and PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.4 | ColumnjuniAtmPvcStatsInCells | read-only | current | Received cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.5 | ColumnjuniAtmPvcStatsInCellOctets | read-only | current | Received cells octets. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.6 | ColumnjuniAtmPvcStatsInPackets | read-only | current | Received AAL PDUs. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.7 | ColumnjuniAtmPvcStatsInPacketOctets | read-only | current | Received AAL PDU octets. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.8 | ColumnjuniAtmPvcStatsOutCells | read-only | current | Transmitted cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.9 | ColumnjuniAtmPvcStatsOutCellOctets | read-only | current | Transmitted cell octets. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.10 | ColumnjuniAtmPvcStatsOutPackets | read-only | current | Transmitted AAL PDUs. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.11 | ColumnjuniAtmPvcStatsOutPacketOctets | read-only | current | Transmitted AAL PDU octets. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.12 | ColumnjuniAtmPvcStatsInCellErrors | read-only | current | Received cells dropped due to errors. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.13 | ColumnjuniAtmPvcStatsinPacketErrors | read-only | current | Received packets dropped due to errors. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.14 | ColumnjuniAtmPvcStatsOutCellErrors | read-only | current | Cells not transmitted due to errors. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.15 | ColumnjuniAtmPvcStatsOutPacketErrors | read-only | current | Packets not transmitted due to errors. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.16 | ColumnjuniAtmPvcStatsInPacketDiscards | read-only | current | Received packets w/o errors discarded. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.17 | ColumnjuniAtmPvcStatsInPacketOctetDiscards | read-only | current | Received bytes w/o errors discarded. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.18 | ColumnjuniAtmPvcStatsInPacketUnknownProtocol | read-only | current | Received packets that are discarded because the interface can not discern or is not configured to support this protocol. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4 | TablejuniAtmVpTunnelTable | not-accessible | current | This table contains entries for ATM VP Tunnels present in the system. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4.1 | RowjuniAtmVpTunnelEntry | not-accessible | current | Each entry describes the characteristics of an ATM VP Tunnel. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.1 | ColumnjuniAtmVpTunnelIfIndex | not-accessible | current | The ifIndex of the ATM interface. The value of this object is the same as the juniAtmIfIndex object in the juniAtmIfTable. Entries in this table cannot be crea… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.2 | ColumnjuniAtmVpTunnelVpi | not-accessible | current | The VPI value for this VP tunnel entry. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.3 | ColumnjuniAtmVpTunnelKbps | read-create | current | The tunnel rate in kilobits per second (kbps) for this entry. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.4 | ColumnjuniAtmVpTunnelRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.5 | ColumnjuniAtmVpTunnelServiceCategory | read-create | current | The ATM service category for the tunnel. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5 | TablejuniAtmIfCapabilityTable | not-accessible | current | This table contains entries for ATM interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1 | RowjuniAtmIfCapabilityEntry | not-accessible | current | Each entry describes the capabilities of an ATM interface. A management client can use this table to determine differences in the configurable level of support… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.1 | ColumnjuniAtmIfCapabilityIndex | not-accessible | current | The ifIndex of the ATM interface. The value of this object is the same as juniAtmIfIndex in the juniAtmIfTable. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.2 | ColumnjuniAtmIfCapabilityTrafficShaping | read-only | current | Indicates whether traffic shaping is supported on this interface; true(1) indicates that it is, false(2) indicates that it is not. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.3 | ColumnjuniAtmIfCapabilityOam | read-only | current | Indicates whether OAM is supported on this interface; true(1) indicates that it is, false(2) indicates that it is not. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.4 | ColumnjuniAtmIfCapabilityDefaultVcPerVp | read-only | current | The default number of VCs per VP for this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.5 | ColumnjuniAtmIfCapabilityNumVpiVciBits | read-only | current | The total range of bits used for constructing VPI/VCI identifiers for this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.6 | ColumnjuniAtmIfCapabilityMaxVcd | read-only | current | The maximum configurable value for a VCD on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.7 | ColumnjuniAtmIfCapabilityMaxVpi | read-only | current | The maximum configurable value for a VPI on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.8 | ColumnjuniAtmIfCapabilityMaxVci | read-only | current | The maximum configurable value for a VCI on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.9 | ColumnjuniAtmIfCapabilityOamCellFilter | read-only | current | Indicates whether OAM cell filter is supported on this interface; true(1) indicates that it is, false(2) indicates that it is not. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.6 | TablejuniAtmIfSvcSignallingTable | not-accessible | deprecated | This table contains entries for extending the juniAtmIfTable for configuring signalling information for switched virtual connection (SVC). |
| 1.3.6.1.4.1.4874.2.2.8.1.1.6.1 | RowjuniAtmIfSvcSignallingEntry | not-accessible | deprecated | Each entry provides configuration parameters for ATM signalling on the interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.1 | ColumnjuniAtmIfSvcSignallingVpi | read-write | deprecated | The VPI identifier of the ATM circuit used for signalling for this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.2 | ColumnjuniAtmIfSvcSignallingVci | read-write | deprecated | The VCI identifier of the ATM circuit used for signalling for this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.3 | ColumnjuniAtmIfSvcSignallingVcd | read-write | deprecated | An integer identifier for the ATM circuit used for signalling on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.4 | ColumnjuniAtmIfSvcSignallingAdminStatus | read-write | deprecated | The administrative status of signalling on the ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.7 | TablejuniAtmIfPnniRccTable | not-accessible | obsolete | This table contains entries for extending the juniAtmIfTable for configuring PNNI RCC information. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.7.1 | RowjuniAtmIfPnniRccEntry | not-accessible | obsolete | Each entry provides configuration parameters for PNNI RCC on the interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.7.1.1 | ColumnjuniAtmIfPnniRccVpi | read-write | obsolete | The VPI identifier of the ATM circuit used for PNNI RCC on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.7.1.2 | ColumnjuniAtmIfPnniRccVci | read-write | obsolete | The VCI identifier of the ATM circuit used for PNNI RCC on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.7.1.3 | ColumnjuniAtmIfPnniRccVcd | read-write | obsolete | An integer identifier for the ATM circuit used for PNNI RCC on this interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.7.1.4 | ColumnjuniAtmIfPnniRccAdminStatus | read-write | obsolete | The administrative status of PNNI on the ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8 | TablejuniAtmOamF4FlowEndToEndCfgTable | not-accessible | current | This table contains entries for F4 OAM end-to-end flows configured. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1 | RowjuniAtmOamF4FlowEndToEndCfgEntry | not-accessible | current | Each entry provides configuration parameters for one F4 OAM end-to-end flow configured for each VPI. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.1 | ColumnjuniAtmOamF4FlowEndToEndIfIndex | not-accessible | current | The ifIndex of the ATM interface to configure the F4 OAM end-to-end flow. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.2 | ColumnjuniAtmOamF4FlowEndToEndVpi | not-accessible | current | Select the VPI for F4 OAM end-to-end flow configuration. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.3 | ColumnjuniAtmOamF4FlowEndToEndLoopbackTimer | read-create | current | Configure the timer for sending the F4 flow end-to-end loopback OAM cells. Setting this value will enable sending the F4 end cells on the circuit. It is not al… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.4 | ColumnjuniAtmOamF4FlowEndToEndCCSink | read-create | current | Enable/Disable F4 flow end-to-end continuity check sink end point for this VP. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.5 | ColumnjuniAtmOamF4FlowEndToEndCCSource | read-create | current | Enable/Disable F4 flow end-to-end continuity check source end point for this VP. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.8.1.6 | ColumnjuniAtmOamF4FlowEndToEndRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.9 | TablejuniAtmOamF4FlowSegmentCfgTable | not-accessible | current | This table contains entries for F4 OAM Segment flows configured. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.9.1 | RowjuniAtmOamF4FlowSegmentCfgEntry | not-accessible | current | Each entry provides configuration parameters for one F4 OAM Segment flow configured for each VPI. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.9.1.1 | ColumnjuniAtmOamF4FlowSegmentIfIndex | not-accessible | current | The ifIndex of the ATM interface to configure the F4 OAM segment flow. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.9.1.2 | ColumnjuniAtmOamF4FlowSegmentVpi | not-accessible | current | Select the VPI for F4 OAM segment flow configuration. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.9.1.3 | ColumnjuniAtmOamF4FlowSegmentCCSink | read-create | current | Enable/Disable F4 flow segment continuity check sink end point for this VP. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.9.1.4 | ColumnjuniAtmOamF4FlowSegmentCCSource | read-create | current | Enable/Disable F4 flow segment continuity check source end point for this VP. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.9.1.5 | ColumnjuniAtmOamF4FlowSegmentRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.10 | TablejuniAtmVpDescrTable | not-accessible | current | This table contains entries for ATM VP Description present in the system. The user can configure a description of up to 32 characters for every VP in the ATM i… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.10.1 | RowjuniAtmVpDescrEntry | not-accessible | current | Each entry contains the description of the VP. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.10.1.1 | ColumnjuniAtmVpDescription | read-write | current | The description for this VP. The default value of this object is null string. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11 | TablejuniAtmF4FlowOamEndToEndStatsTable | not-accessible | current | This table contains entries for F4 flow EndToEnd OAM circuits stats. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1 | RowjuniAtmF4FlowOamEndToEndStatsEntry | not-accessible | current | Each entry provides stats for one F4 OAM circuit for each VPI. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.1 | ColumnjuniAtmF4FlowInOamEndAisCells | read-only | current | Received end-to-end OAM F4 AIS cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.2 | ColumnjuniAtmF4FlowInOamEndRdiCells | read-only | current | Received end-to-end OAM F4 RDI cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.3 | ColumnjuniAtmF4FlowInOamEndCCCells | read-only | current | Received end-to-end OAM F4 CC cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.4 | ColumnjuniAtmF4FlowInOamEndCCActDeActCells | read-only | current | Received end-to-end OAM F4 activation/de-activation cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.5 | ColumnjuniAtmF4FlowInOamEndLoopbackCells | read-only | current | Total received OAM F4 end-to-end loopback cells. Aggregate of juniAtmF4FlowEndToEndInLoopbackCmds and juniAtmF4FlowEndToEndInLoopbackRsps |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.6 | ColumnjuniAtmF4FlowOutEndRdiCells | read-only | current | Transmitted end-to-end OAM F4 RDI cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.7 | ColumnjuniAtmF4FlowOutEndCCCells | read-only | current | Transmitted end-to-end OAM F4 CC cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.8 | ColumnjuniAtmF4FlowOutEndCCActDeActCells | read-only | current | Transmitted end-to-end OAM F4 activation/de-activation cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.9 | ColumnjuniAtmF4FlowOutEndToEndLoopbackCells | read-only | current | Total transmitted OAM F4 end-to-end loopback cells. Aggregate of juniAtmF4FlowEndToEndOutLoopbackCmds and juniAtmF4FlowEndToEndOutLoopbackRsps |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.10 | ColumnjuniAtmF4FlowEndActualLoopbackFreq | read-only | current | Actual end-to-end loopback Frequecy calculated for OAM cells transmission. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.11 | ColumnjuniAtmF4FlowEndLastTimeChanged | read-only | current | Last time end-to-end F4 OAM flow got changed. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.12 | ColumnjuniAtmF4FlowOamEndVpOperationState | read-only | current | Represents the F4 end-to-end OAM flow VP operation states. It can take one of the following operational state values: vcAisState - AIS cell received or underly… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.13 | ColumnjuniAtmF4FlowOamEndVpAdminState | read-only | current | End-to-end VP admin state. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.14 | ColumnjuniAtmF4FlowEndInOamCells | read-only | current | Received end-to-end OAM F4 loopback cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.15 | ColumnjuniAtmF4FlowEndOutOamCells | read-only | current | Transmitted end-to-end OAM F4 loopback cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.16 | ColumnjuniAtmF4FlowEndInOamCellsDropped | read-only | current | Received end-to-end OAM cells that were dropped. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.17 | ColumnjuniAtmF4FlowEndToEndInLoopbackCmds | read-only | current | Received OAM F4 end-to-end loopback commands. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.18 | ColumnjuniAtmF4FlowEndToEndInLoopbackRsps | read-only | current | Received OAM F4 end-to-end loopback responses. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.19 | ColumnjuniAtmF4FlowEndToEndOutLoopbackCmds | read-only | current | Transmitted OAM F4 end-to-end loopback commands. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.11.1.20 | ColumnjuniAtmF4FlowEndToEndOutLoopbackRsps | read-only | current | Transmitted OAM F4 end-to-end loopback responses. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12 | TablejuniAtmF4FlowOamSegmentStatsTable | not-accessible | current | This table contains entries for F4 flow Segment OAM circuits stats. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1 | RowjuniAtmF4FlowOamSegmentStatsEntry | not-accessible | current | Each entry provides stats for one F4 OAM circuit for each VPI. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.1 | ColumnjuniAtmF4FlowInOamSegmentAisCells | read-only | current | Received end-to-end OAM F4 AIS cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.2 | ColumnjuniAtmF4FlowInOamSegmentRdiCells | read-only | current | Received end-to-end OAM F4 RDI cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.3 | ColumnjuniAtmF4FlowInOamSegmentCCCells | read-only | current | Received end-to-end OAM F4 CC cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.4 | ColumnjuniAtmF4FlowInOamSegmentCCActDeActCells | read-only | current | Received end-to-end OAM F4 activation/de-activation cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.5 | ColumnjuniAtmF4FlowInOamSegmentLoopbackCells | read-only | current | Total received OAM F4 segment loopback cells. Aggregate of juniAtmF4FlowSegmentInLoopbackCmds and juniAtmF4FlowSegmentInLoopbackRsps |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.6 | ColumnjuniAtmF4FlowOutSegmentRdiCells | read-only | current | Transmitted end-to-end OAM F4 RDI cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.7 | ColumnjuniAtmF4FlowOutSegmentCCCells | read-only | current | Transmitted end-to-end OAM F4 CC cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.8 | ColumnjuniAtmF4FlowOutSegmentCCActDeActCells | read-only | current | Transmitted end-to-end OAM F4 activation/de-activation cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.9 | ColumnjuniAtmF4FlowOutSegmentLoopbackCells | read-only | current | Total transmitted OAM F4 segment loopback cells. Aggregate of juniAtmF4FlowSegmentOutLoopbackCmds and juniAtmF4FlowSegmentOutLoopbackRsps |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.10 | ColumnjuniAtmF4FlowSegmentLastTimeChanged | read-only | current | Last time end-to-end F4 OAM flow got changed. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.11 | ColumnjuniAtmF4FlowOamSegmentVpOperationState | read-only | current | Represents the F4 end-to-end OAM flow VP operation states. It can take one of the following operational state values: vcAisState - AIS cell received or underly… |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.12 | ColumnjuniAtmF4FlowOamSegmentVpAdminState | read-only | current | Segment VP admin state. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.13 | ColumnjuniAtmF4FlowSegmentInOamCells | read-only | current | Received end-to-end OAM F4 loopback cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.14 | ColumnjuniAtmF4FlowSegmentOutOamCells | read-only | current | Transmitted end-to-end OAM F4 loopback cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.15 | ColumnjuniAtmF4FlowSegmentInOamCellsDropped | read-only | current | Received end-to-end OAM cells that were dropped. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.16 | ColumnjuniAtmF4FlowSegmentInLoopbackCmds | read-only | current | Received OAM F4 segment loopback commands. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.17 | ColumnjuniAtmF4FlowSegmentInLoopbackRsps | read-only | current | Received OAM F4 segment loopback responses. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.18 | ColumnjuniAtmF4FlowSegmentOutLoopbackCmds | read-only | current | Transmitted OAM F4 segment loopback commands. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.12.1.19 | ColumnjuniAtmF4FlowSegmentOutLoopbackRsps | read-only | current | Transmitted OAM F4 segment loopback responses. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.13 | TablejuniAtmMartiniTimeoutTimerTable | not-accessible | current | This table contains entries for ATM Martini cell aggregation timeout detection. The user can configure timeout values for three timers. A row exists for every … |
| 1.3.6.1.4.1.4874.2.2.8.1.1.13.1 | RowjuniAtmMartiniTimeoutTimerEntry | not-accessible | current | Each entry contains the timeout value of ATM Martini cell aggregation timer. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.13.1.1 | ColumnjuniAtmMartiniTimeoutTimerIndex | not-accessible | current | The ATM Martini cell aggregation timeout timer identifier. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.13.1.2 | ColumnjuniAtmMartiniTimeoutTimerValue | read-write | current | The ATM Martini cell aggregation timeout timer value in microseconds. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14 | TablejuniAtmVpStatsTable | not-accessible | current | This table contains entries for ATM VP statistics present in the system. A row exists for every VP on the ATM interface. These rows get created as soon as the … |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1 | RowjuniAtmVpStatsEntry | not-accessible | current | Each entry contain the VP statistics. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.1 | ColumnjuniAtmVpStatsIfIndex | not-accessible | current | The ifIndex of the ATM interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.2 | ColumnjuniAtmVpStatsVpi | not-accessible | current | The VPI value of the virtual path for which statistics are retrieved. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.3 | ColumnjuniAtmVpStatsInCells | read-only | current | Received cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.4 | ColumnjuniAtmVpStatsInPackets | read-only | current | Received AAL5 PDUs. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.5 | ColumnjuniAtmVpStatsInPacketOctets | read-only | current | Received AAL5 PDU octets. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.6 | ColumnjuniAtmVpStatsOutCells | read-only | current | Transmitted cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.7 | ColumnjuniAtmVpStatsOutPackets | read-only | current | Transmitted AAL5 PDUs |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.8 | ColumnjuniAtmVpStatsOutPacketOctets | read-only | current | Transmitted AAL5 PDU octets. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.9 | ColumnjuniAtmVpStatsInPacketErrors | read-only | current | Received packets dropped due to errors. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.10 | ColumnjuniAtmVpStatsOutPacketErrors | read-only | current | Packets not transmitted due to errors. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.11 | ColumnjuniAtmVpStatsInPacketDiscards | read-only | current | Received packets without errors discarded. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.12 | ColumnjuniAtmVpStatsInPacketOctetDiscards | read-only | current | Received bytes without errors discarded. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.13 | ColumnjuniAtmVpStatsInPacketUnknownProtocol | read-only | current | Received packets that are discarded because the interface can not discern or is not configured to support this protocol. |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.14 | ColumnjuniAtmVpStatsCrcErrors | read-only | current | Received packets that are discarded because of check sum erros |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.15 | ColumnjuniAtmVpStatsSarTimeouts | read-only | current | Received packets that are discarded because of SAR timeout |
| 1.3.6.1.4.1.4874.2.2.8.1.1.14.1.16 | ColumnjuniAtmVpStatsOverSizedPackets | read-only | current | Over sized packets that are received on this VP. |
| 1.3.6.1.4.1.4874.2.2.8.1.2 | NodejuniAtmAal5IfLayer | |||
| 1.3.6.1.4.1.4874.2.2.8.1.2.1 | ScalarjuniAtmAal5NextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniAtmAal5IfTable. A GET of this object returns the next available ifIndex value to be used to create an en… |
| 1.3.6.1.4.1.4874.2.2.8.1.2.2 | TablejuniAtmAal5IfTable | not-accessible | current | This table contains entries for ATM AAL5 interfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.2.1 | RowjuniAtmAal5IfEntry | not-accessible | current | Each entry describes the characteristics of an ATM AAL5 interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted … |
| 1.3.6.1.4.1.4874.2.2.8.1.2.2.1.1 | ColumnjuniAtmAal5IfIndex | not-accessible | current | The ifIndex of the ATM AAL5 interface. When creating entries in this table, suitable values for this object are determined by reading juniAtmAal5NextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.2.1.2 | ColumnjuniAtmAal5IfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.2.2.1.3 | ColumnjuniAtmAal5IfLowerIfIndex | read-create | current | The ifIndex of an ATM interface over which this ATM AAL5 interface is to be layered. A value of zero indicates no layering. An implementation may choose to req… |
| 1.3.6.1.4.1.4874.2.2.8.1.2.3 | TablejuniAtmBulkCircuitsNameTable | not-accessible | current | The entries in this table provide mappings of ATM bulk virtual circuit range names to local integer identifiers for those profiles. These integers are used as … |
| 1.3.6.1.4.1.4874.2.2.8.1.2.3.1 | RowjuniAtmBulkCircuitsNameEntry | not-accessible | current | A mapping of a ATM bulk virtual circuit range name to an integer identifier for that name. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.3.1.1 | ColumnjuniAtmBulkCircuitsNameAal5IfIndex | not-accessible | current | The ifIndex of the ATM AAL5 interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.3.1.2 | ColumnjuniAtmBulkCircuitsNameName | not-accessible | current | The ATM bulk virtual circuit range name uniquely identifying this entry. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.3.1.3 | ColumnjuniAtmBulkCircuitsNameRowStatus | read-create | current | Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. Creating an entry in this table creates correspond… |
| 1.3.6.1.4.1.4874.2.2.8.1.2.3.1.4 | ColumnjuniAtmBulkCircuitsNameId | read-only | current | The integer identifier associated with this ATM bulk virtual circuit range name. This value of this identifier is assigned by the device when an entry in this … |
| 1.3.6.1.4.1.4874.2.2.8.1.2.4 | TablejuniAtmBulkCircuitsIdTable | not-accessible | current | Provides inverse mapping of ATM bulk virtual circuit IDs to ATM bulk virtual circuit names. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.4.1 | RowjuniAtmBulkCircuitsIdEntry | not-accessible | current | A mapping of an integer identifier to a ATM bulk virtual circuit name. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.4.1.1 | ColumnjuniAtmBulkCircuitsIdAal5IfIndex | not-accessible | current | The ifIndex of the ATM AAL5 interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.4.1.2 | ColumnjuniAtmBulkCircuitsIdId | not-accessible | current | The integer identifier associated with this ATM bulk virtual circuit name. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.4.1.3 | ColumnjuniAtmBulkCircuitsIdName | read-only | current | The ATM bulk virtual circuit name having the associated identifier. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.4.1.4 | ColumnjuniAtmBulkCircuitsIdNextInstance | read-only | current | The next available instance value for juniAtmBulkCircuitsEntry. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.5 | TablejuniAtmBulkCircuitsTable | not-accessible | current | This table contains bulk virtual circuit range parameters. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.5.1 | RowjuniAtmBulkCircuitsEntry | not-accessible | current | Each entry describes the characteristics of VC range. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.1 | ColumnjuniAtmBulkCircuitsAal5IfIndex | not-accessible | current | The ifIndex of the ATM AAL5 interface on which this bulk virtual circuit sub-range is created. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.2 | ColumnjuniAtmBulkCircuitsId | not-accessible | current | The integer identifier associated with this ATM bulk virtual circuit name. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.3 | ColumnjuniAtmBulkCircuitsInstance | not-accessible | current | The unique identifier of the ATM bulk virtual circuit sub-range. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.4 | ColumnjuniAtmBulkCircuitsRowStatus | read-create | current | Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. Since none of the VPI/VCI minimum and maximum valu… |
| 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.5 | ColumnjuniAtmBulkCircuitsMinVpi | read-create | current | The minimum value of VPI for this circuit sub-range. This value must be less than or equal to the value of juniAtmBulkCircuitsMaxVpi. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.6 | ColumnjuniAtmBulkCircuitsMaxVpi | read-create | current | The maximum value of VPI for this cicuit sub-range. This value must be equal to or greater than the value of juniAtmBulkCircuitsMinVpi. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.7 | ColumnjuniAtmBulkCircuitsMinVci | read-create | current | The minimum value of VCI for this circuit sub-range. This value must be less than or equal to the value of juniAtmBulkCircuitsMaxVci. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.8 | ColumnjuniAtmBulkCircuitsMaxVci | read-create | current | The maximum value of VCI for this circuit sub-range. This value must be equal to or greater than the value of juniAtmBulkCircuitsMinVci. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.5.1.9 | ColumnjuniAtmBulkCircuitsAdminState | read-create | current | The administrative status of this circuit sub-range. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.6 | TablejuniAtmProfileOverrideAssignIfCircuitTable | not-accessible | current | Table providing overriding profile assignment to a circuit configured as part of bulk-configuration. Circuit is identified by interface index and vpi, vci. The… |
| 1.3.6.1.4.1.4874.2.2.8.1.2.6.1 | RowjuniAtmProfileOverrideAssignIfCircuitEntry | not-accessible | current | An assignment of a profile to a circuit configured as part of bulk-configuration on an AAL5 interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.1 | ColumnjuniAtmProfileOverrideAssignIfCircuitAal5Index | not-accessible | current | The ifIndex of the AAL5 interface to which the profile is assigned. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.2 | ColumnjuniAtmProfileOverrideAssignIfCircuitRangeId | not-accessible | current | The integer identifier associated with the ATM bulk circuit configuration. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.3 | ColumnjuniAtmProfileOverrideAssignIfCircuitVpi | not-accessible | current | The VPI value of the circuit to which the profile is assigned. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.4 | ColumnjuniAtmProfileOverrideAssignIfCircuitVci | not-accessible | current | The VCI value of the circuit to which the profile is assigned. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.5 | ColumnjuniAtmProfileOverrideAssignIfCircuitRowStatus | read-create | current | Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. Since the VPI, VCI and profileId values do not hav… |
| 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.6 | ColumnjuniAtmProfileOverrideAssignIfCircuitProfileId | read-create | current | The ID of the profile assigned to the circuit configured as part of bulk-configuration. Circuit is identified by interface index and vpi, vci. |
| 1.3.6.1.4.1.4874.2.2.8.1.2.6.1.7 | ColumnjuniAtmProfileOverrideAssignIfCircuitOperStatus | read-only | current | The operational status of the profile override assignment identified by this entry. It returns inactive(0), if a static ATM circuit with identical VPI/VCI valu… |
| 1.3.6.1.4.1.4874.2.2.8.1.3 | NodejuniAtmSubIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.8.1.3.1 | ScalarjuniAtmSubIfNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in juniAtmSubIfTable. A GET of this object returns the next available ifIndex value to be used to create an ent… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2 | TablejuniAtmSubIfTable | not-accessible | current | This table contains entries for ATM Subinterfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1 | RowjuniAtmSubIfEntry | not-accessible | current | Each entry describes the characteristics of an ATM Subinterface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.1 | ColumnjuniAtmSubIfIndex | not-accessible | current | The ifIndex of the ATM Subinterface. When creating entries in this table, suitable values for this object are determined by reading juniAtmSubNextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.2 | ColumnjuniAtmSubIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.3 | ColumnjuniAtmSubIfDistinguisher | read-create | current | An integer identifier for the subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The val… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.4 | ColumnjuniAtmSubIfLowerIfIndex | read-create | current | The ifIndex of an ATM AAL5 interface over which this ATM subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to … |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.5 | ColumnjuniAtmSubIfNbma | read-create | current | The NBMA administrative setting. Setting this value of this object to true(1) will enable multipoint access on this interface. Setting the value to false(2), w… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.6 | ColumnjuniAtmSubIfAddress | read-create | deprecated | Specifies the local ATM NSAP address of the circuit. A GET operation returns a full 20-octet NSAP. A SET operation only requires 7 octets, since the prefix can… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.7 | ColumnjuniAtmSubIfMtu | read-create | current | The size of the largest packet which can be sent/received on the interface, specified in octets. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.8 | ColumnjuniAtmSubIfAdvisoryRxSpeed | read-create | current | Advisory receive speed, in kilobits per second (kbps), of this subinterface. This object has no impact on forwarding performance but may be used as a hint for … |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.9 | ColumnjuniAtmSubIfMartiniMaxCellsPerPacket | read-create | current | The number of cells that can be aggregated in a single ATM Martini packet in cell-relay mode. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.10 | ColumnjuniAtmSubIfMartiniTimeoutTimerId | read-create | current | The timer identifier used to abandon cell aggregation when no cells are supplied for transmission in ATM Martini cell-relay mode. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.11 | ColumnjuniAtmSubIfAssociatedVcClassId | read-create | current | The integer identifier of the ATM VC class associated with this ATM sub interface. A value for this identifier is determined by locating or creating an ATM VC … |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3 | TablejuniAtmSubIfVccTable | not-accessible | current | This table contains entries for ATM VCCs configured on ATM subinterfaces present in the system. An implementation may constrain the number of VCCs permitted to… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1 | RowjuniAtmSubIfVccEntry | not-accessible | current | Each entry describes the characteristics of an ATM subinterface VCC. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.1 | ColumnjuniAtmSubIfVccVpi | not-accessible | current | The VPI of the ATM VCC used by this subinterface. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.2 | ColumnjuniAtmSubIfVccVci | not-accessible | current | The VCI of the ATM VCC used by this subinterface. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.3 | ColumnjuniAtmSubIfVccRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.4 | ColumnjuniAtmSubIfVccVcd | read-create | current | An integer identifier for the circuit, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value mu… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.5 | ColumnjuniAtmSubIfVccType | read-create | current | Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. The 'aut… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.6 | ColumnjuniAtmSubIfVccServiceCategory | read-create | current | Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-RealTime Variable … |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.7 | ColumnjuniAtmSubIfVccPcr | read-create | current | Peak Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAtmSubIfVccServiceCategory is configured to have one o… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.8 | ColumnjuniAtmSubIfVccScr | read-create | current | Sustained Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAtmSubIfVccServiceCategory is configured to have … |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.9 | ColumnjuniAtmSubIfVccMbs | read-create | current | Maximum Burst Size, in cells, of this circuit. This parameter is only required when juniAtmSubIfVccServiceCategory is configured to have the following value: n… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.10 | ColumnjuniAtmSubIfInverseArp | read-create | current | Enables the inverse ARP protocol on this VCC; true(1) enables the protocol, false(2) disables it. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.11 | ColumnjuniAtmSubIfInverseArpRefresh | read-create | current | The refresh rate in minutes between inverse ARP protocol messages. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.12 | ColumnjuniAtmSubIfVccAssociatedVcClassId | read-create | current | The integer identifier of the ATM VC class associated with this ATM sub interface. A value for this identifier is determined by locating or creating an ATM VC … |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4 | TablejuniAtmCircuitOamTable | not-accessible | current | This table contains circuit OAM data for a PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1 | RowjuniAtmCircuitOamEntry | not-accessible | current | Each entry provides OAM data on an ATM PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.1 | ColumnjuniAtmCircuitOamIfIndex | not-accessible | current | The ifIndex of the ATM subinterface. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.2 | ColumnjuniAtmCircuitOamVpi | not-accessible | current | The VPI of the ATM VCC used by this ATM interface and PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.3 | ColumnjuniAtmCircuitOamVci | not-accessible | current | The VCI of the ATM VCC used by this ATM interface and PVC. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.4 | ColumnjuniAtmCircuitOamAdminStatus | read-write | current | The administrative state of OAM for the interface identified by this entry. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.5 | ColumnjuniAtmCircuitOamLoopbackOperStatus | read-only | current | The operational status of OAM for the interface identified by this entry. oamOperStatusNotSupported(0) - OAM not supported on this interface oamOperStatusDisab… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.6 | ColumnjuniAtmCircuitVcOamOperStatus | read-only | current | The OAM VC operational status of this entry. oamVcOperStateAisState(0) - AIS cell received or underlying physical layer reporting transmission path AIS oamVcOp… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.7 | ColumnjuniAtmCircuitOamLoopbackFrequency | read-write | current | The OAM loopback frequency in seconds. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.8 | ColumnjuniAtmCircuitInOamF5Cells | read-only | current | Received OAM F5 cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.9 | ColumnjuniAtmCircuitInOamCellsDropped | read-only | current | Received OAM cells that were dropped. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.10 | ColumnjuniAtmCircuitOutOamF5Cells | read-only | current | Transmitted OAM F5 cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.11 | ColumnjuniAtmCircuitInOamF5EndToEndLoopbackCells | read-only | current | Total received OAM F5 end-to-end loopback cells. Aggregate of juniAtmCircuitInOamF5EndToEndLoopbackCmds and juniAtmCircuitInOamF5EndToEndLoopbackRsps |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.12 | ColumnjuniAtmCircuitInOamF5SegmentLoopbackCells | read-only | current | Total received OAM F5 segment loopback cells. Aggregate of juniAtmCircuitInOamF5SegmentLoopbackCmds and juniAtmCircuitInOamF5SegmentLoopbackRsps |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.13 | ColumnjuniAtmCircuitInOamF5AisCells | read-only | current | Received OAM F5 AIS cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.14 | ColumnjuniAtmCircuitInOamF5RdiCells | read-only | current | Received OAM F5 RDI cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.15 | ColumnjuniAtmCircuitOutOamF5EndToEndLoopbackCells | read-only | current | Total transmitted OAM F5 end-to-end loopback cells. Aggregate of juniAtmCircuitOutOamF5EndToEndLoopbackCmds and juniAtmCircuitOutOamF5EndToEndLoopbackRsps |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.16 | ColumnjuniAtmCircuitOutOamF5SegmentLoopbackCells | read-only | current | Total transmitted OAM F5 segment loopback cells. Aggregate of juniAtmCircuitOutOamF5SegmentLoopbackCmds and juniAtmCircuitOutOamF5SegmentLoopbackRsps |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.17 | ColumnjuniAtmCircuitOutOamF5RdiCells | read-only | current | Transmitted OAM F5 RDI cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.18 | ColumnjuniAtmCircuitInOamF5EndToEndLoopbackCmds | read-only | current | Received OAM F5 end-to-end loopback commands. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.19 | ColumnjuniAtmCircuitInOamF5EndToEndLoopbackRsps | read-only | current | Received OAM F5 end-to-end loopback responses. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.20 | ColumnjuniAtmCircuitInOamF5SegmentLoopbackCmds | read-only | current | Received OAM F5 segment loopback commands. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.21 | ColumnjuniAtmCircuitInOamF5SegmentLoopbackRsps | read-only | current | Received OAM F5 segment loopback responses. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.22 | ColumnjuniAtmCircuitOutOamF5EndToEndLoopbackCmds | read-only | current | Transmitted OAM F5 end-to-end loopback commands. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.23 | ColumnjuniAtmCircuitOutOamF5EndToEndLoopbackRsps | read-only | current | Transmitted OAM F5 end-to-end loopback responses. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.24 | ColumnjuniAtmCircuitOutOamF5SegmentLoopbackCmds | read-only | current | Transmitted OAM F5 segment loopback commands. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.25 | ColumnjuniAtmCircuitOutOamF5SegmentLoopbackRsps | read-only | current | Transmitted OAM F5 segment loopback responses. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.26 | ColumnjuniAtmCircuitOamUpCount | read-write | current | Specifies the number of successive loopback cell responses to receive before a PVC is up for connectivity verification. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.27 | ColumnjuniAtmCircuitOamDownCount | read-write | current | Specifies the number of successive loopback cell responses not received before declaring a PVC down for connectivity verification. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.28 | ColumnjuniAtmCircuitOamRetryFrequency | read-write | current | Specifies the frequency (in seconds) to transmit loopback cells when verifying PVC state (up or down) for connectivity verification. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.29 | ColumnjuniAtmCircuitOamAlarmDownCount | read-write | current | Specifies the number of successive alarm (AIS or RDI) cells to receive before declaring a PVC down. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.30 | ColumnjuniAtmCircuitOamAlarmClearTimeout | read-write | current | Specifies how long to wait (in seconds) before declaring a PVC up after it has stopped receiving alarm cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5 | TablejuniAtmSubIfVccTrafficShapingTable | not-accessible | current | This table contains entries for traffic shaping of ATM VCCs configured on ATM subinterfaces present in the system. This table augments the juniAtmSubIfVccTable… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5.1 | RowjuniAtmSubIfVccTrafficShapingEntry | not-accessible | current | Each entry describes the traffic shping characteristics of an ATM subinterface VCC. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.1 | ColumnjuniAtmSubIfVccTrafficShapingCdvt | read-create | current | The network cell delay variation tolerance (CDVT) in tenths of a microsecond. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.2 | ColumnjuniAtmSubIfVccTrafficShapingClp0 | read-create | current | Specifies whether or not only CLP0 cells are to be policed according to the traffic contract. CLP1 cells are forwarded on a best-effort basis CLP-significant m… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.3 | ColumnjuniAtmSubIfVccTrafficShapingTagging | read-create | current | Specifies whether or not CLP0 cells should be tagged for SCR policing (VBR.3 conformance). Applicable only for VBR circuits. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.4 | ColumnjuniAtmSubIfVccTrafficShapingPoliceObserve | read-create | current | Specifies whether of not no policing action is to be taken (note the double negative; if true(1) then no policing action will be taken; if false(2) then polici… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.5 | ColumnjuniAtmSubIfVccTrafficShapingPacketShaping | read-create | current | Specifies whether of not to shape output traffic on a packet boundary. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6 | TablejuniAtmSubIfSvcConfigTable | not-accessible | deprecated | This table contains entries for extending the juniAtmSubIfTable to configure switched virtual connection (SVC) on the subinterfaces. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1 | RowjuniAtmSubIfSvcConfigEntry | not-accessible | deprecated | Each entry provides configuration parameters for an ATM SVC on the subinterface. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.1 | ColumnjuniAtmSubIfSvcRowStatus | read-create | deprecated | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.2 | ColumnjuniAtmSubIfSvcConfigDestAtmAddress | read-create | deprecated | Specifies the destination ATM NSAP address of the circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.3 | ColumnjuniAtmSubIfSvcConfigCircuitType | read-create | deprecated | Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.4 | ColumnjuniAtmSubIfSvcConfigServiceCategory | read-create | deprecated | Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-RealTime Variable … |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.5 | ColumnjuniAtmSubIfSvcConfigPcr | read-create | deprecated | Peak Cell Rate, in kilo-bits per second (kbps), of this circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.6 | ColumnjuniAtmSubIfSvcConfigScr | read-create | deprecated | Sustained Cell Rate, in kilo-bits per second (kbps), of this circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.7 | ColumnjuniAtmSubIfSvcConfigMbs | read-create | deprecated | Maximum Burst Size, in cells, of this circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.8 | ColumnjuniAtmSubIfSvcConfigCdvt | read-create | obsolete | Specify the network Cell Delay Variation Tolerance. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.9 | ColumnjuniAtmSubIfSvcConfigClp0 | read-create | deprecated | Specify that only CLP0 cells are to be policed according to the traffic contract. CLP1 cells are forwarded on a best-effort basis CLP-significant model for (VB… |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.10 | ColumnjuniAtmSubIfSvcConfigTagging | read-create | deprecated | Specify that CLP0 cells should be tagged for SCR policing (VBR.3 conformance). |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.11 | ColumnjuniAtmSubIfSvcConfigObserve | read-create | obsolete | Specify that no policing action is to be taken; only counters are incremented. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.12 | ColumnjuniAtmSubIfSvcConfigPacketDiscard | read-create | deprecated | Enable early packet Discard for this circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.13 | ColumnjuniAtmSubIfSvcConfigDestE164Address | read-create | obsolete | Specifies the destination ATM E164 address of the circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.3.7 | ScalarjuniAtmSubIfDescriptionExport | read-write | current | Enabling of this object will program the subinterface description down to the applicable line card. Note, the subinterface description sent down to the line ca… |
| 1.3.6.1.4.1.4874.2.2.8.1.4 | NodejuniAtmNbma | |||
| 1.3.6.1.4.1.4874.2.2.8.1.4.1 | TablejuniAtmNbmaMapTable | not-accessible | current | This table contains entries for ATM NBMA maps. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1 | RowjuniAtmNbmaMapEntry | not-accessible | current | Each entry describes the characteristics of an ATM NBMA map. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.1 | ColumnjuniAtmNbmaMapName | not-accessible | current | The NBMA map name. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.2 | ColumnjuniAtmNbmaMapVcd | not-accessible | current | An integer identifier for the ATM circuit, used in conjunction with the command-line interface. The value must be unique among VCs configured on the same ATM i… |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.3 | ColumnjuniAtmNbmaMapIpAddress | read-create | current | The IP address associated with this entry. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.4 | ColumnjuniAtmNbmaMapVpi | read-only | current | The VPI identifier of the ATM circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.5 | ColumnjuniAtmNbmaMapVci | read-only | current | The VCI identifier of the ATM circuit. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.6 | ColumnjuniAtmNbmaMapIfIndex | read-only | current | The ifIndex of the ATM major interface associated with this entry. The value of this object will be zero when the map is not applied to an interface. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.7 | ColumnjuniAtmNbmaMapBroadcast | read-create | current | The broadcast enable/disable setting for this entry. The value true(1) enable broadcast support; disable(2) disabled broadcast support for this entry. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.8 | ColumnjuniAtmNbmaMapRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.4.2 | TablejuniAtmNbmaMapListTable | not-accessible | current | This table contains entries for ATM NBMA map lists. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.2.1 | RowjuniAtmNbmaMapListEntry | not-accessible | current | Each entry describes the characteristics of an ATM NBMA map. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.2.1.1 | ColumnjuniAtmNbmaMapListName | not-accessible | current | The NBMA Map List name. |
| 1.3.6.1.4.1.4874.2.2.8.1.4.2.1.2 | ColumnjuniAtmNbmaMapListRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.8.1.5 | NodejuniAtmPing | |||
| 1.3.6.1.4.1.4874.2.2.8.1.5.1 | NodejuniAtmPingTestTypes | |||
| 1.3.6.1.4.1.4874.2.2.8.1.5.1.1 | IdentityjuniAtmPingTestOamSeg | current | This identifies an OAM Ping (multiple loopbacks) Test on a VPL, VPC, VCL, or VCC termination point, using segment OAM cells. The test type must have appended t… | |
| 1.3.6.1.4.1.4874.2.2.8.1.5.1.2 | IdentityjuniAtmPingTestOamE2E | current | This identifies an OAM Ping (multiple loopbacks) Test on a VPL, VPC, VCL, or VCC termination point, using end-to-end OAM cells. | |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2 | TablejuniAtmVpPingTable | not-accessible | current | This table contains entries for extending the ATM-FORUM-SNMP-M4-MIB atmM4VpTestTable to do ping (multiple loopback) type testing. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1 | RowjuniAtmVpPingEntry | not-accessible | current | Each entry describes the characteristics, status and results of the most recent ATM ping test. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.1 | ColumnjuniAtmVpPingProbeCount | read-write | current | The number of ping probes (OAM cells) to be sent to complete the test. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.2 | ColumnjuniAtmVpPingTimeOut | read-write | current | Specifies the time-out value, in seconds, for a remote ping operation. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.3 | ColumnjuniAtmVpPingCtlTrapGeneration | read-write | current | The value of this object determines when and if to generate a notification for this entry: testCompletion(0) - Generate a juniPingTestCompleted notification. T… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.4 | ColumnjuniAtmVpPingSentProbes | read-only | current | The number of ping probes (OAM cells) that have been sent thus far for this test. The value of this object MUST be set to zero when the atmfM4VpTestStatus obje… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.5 | ColumnjuniAtmVpPingProbeResponses | read-only | current | The number of ping responses that have been received thus far for this test. The value of this object MUST be set to zero when the atmfM4VpTestStatus object tr… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.6 | ColumnjuniAtmVpPingStartTime | read-only | current | The time (sysUpTime) when the test started. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.7 | ColumnjuniAtmVpPingMinRtt | read-only | current | The shortest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VpTestStatus object … |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.8 | ColumnjuniAtmVpPingMaxRtt | read-only | current | The longest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VpTestStatus object t… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.9 | ColumnjuniAtmVpPingAverageRtt | read-only | current | The average round-trip-time (RTT) for all the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VpTestStatus obje… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3 | TablejuniAtmVcPingTable | not-accessible | current | This table contains entries for extending the ATM-FORUM-SNMP-M4-MIB atmM4VcTestTable to do ping (multiple loopback) type testing. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1 | RowjuniAtmVcPingEntry | not-accessible | current | Each entry describes the characteristics, status and results of the most recent ATM ping test. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.1 | ColumnjuniAtmVcPingProbeCount | read-write | current | The number of ping probes (OAM cells) to be sent to complete the test. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.2 | ColumnjuniAtmVcPingTimeOut | read-write | current | Specifies the time-out value, in seconds, for a remote ping operation. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.3 | ColumnjuniAtmVcPingCtlTrapGeneration | read-write | current | The value of this object determines when and if to generate a notification for this entry: testCompletion(0) - Generate a juniPingTestCompleted notification. T… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.4 | ColumnjuniAtmVcPingSentProbes | read-only | current | The number of ping probes (OAM cells) that have been sent thus far for this test. The value of this object MUST be set to zero when the atmfM4VcTestStatus obje… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.5 | ColumnjuniAtmVcPingProbeResponses | read-only | current | The number of ping responses that have been received thus far for this test. The value of this object MUST be set to zero when the atmfM4VcTestStatus object tr… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.6 | ColumnjuniAtmVcPingStartTime | read-only | current | The time (sysUpTime) when the test started. |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.7 | ColumnjuniAtmVcPingMinRtt | read-only | current | The shortest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VcTestStatus object … |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.8 | ColumnjuniAtmVcPingMaxRtt | read-only | current | The longest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VcTestStatus object t… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.9 | ColumnjuniAtmVcPingAverageRtt | read-only | current | The average round-trip-time (RTT) for all the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VcTestStatus obje… |
| 1.3.6.1.4.1.4874.2.2.8.1.5.4 | NodejuniAtmPingTestCode | |||
| 1.3.6.1.4.1.4874.2.2.8.1.5.4.1 | IdentityjuniAtmPingTestCodeOamDisabled | current | This test code indicates that the ATM ping operation cannot be initiated or is aborted because the juniAtmIfOamCellRxAdminState is set to disabled. | |
| 1.3.6.1.4.1.4874.2.2.8.1.5.4.2 | IdentityjuniAtmPingTestCodeCircuitDown | current | This test code indicates that the ATM ping operation cannot be initiated or is aborted because the operational status of the ATM circuit is down. | |
| 1.3.6.1.4.1.4874.2.2.8.1.5.4.3 | IdentityjuniAtmPingTestCodeStopped | current | This test code indicates that the ATM ping operation is administratively stopped by an External Management. | |
| 1.3.6.1.4.1.4874.2.2.8.1.5.4.4 | IdentityjuniAtmPingTestCodeOamVcOperState | current | This test code indicates that the ATM ping operation cannot be initiated or is aborted because the circuit is down because of a OAM fault condition. This is po… | |
| 1.3.6.1.4.1.4874.2.2.8.1.5.4.5 | IdentityjuniAtmPingTestCodeMaxPingCountReached | current | This test code indicates that the ping operation cannot be initiated as the maximum number of ping possible on this interfaces exceeds the allowable limit. | |
| 1.3.6.1.4.1.4874.2.2.8.1.5.4.6 | IdentityjuniAtmPingTestCodeInvalidParams | current | This Test Code identities the Ping operation cannot be initiated as one or more of the Ping Parameters is Invalid. | |
| 1.3.6.1.4.1.4874.2.2.8.1.6 | NodejuniAtmLocation | |||
| 1.3.6.1.4.1.4874.2.2.8.1.6.1 | ScalarjuniAtmSubIfLocationType | read-only | current | Describes the interpretation of JuniInterfaceLocationValue object values into platform-dependent interface location components, e.g., 'slot.port' on an ERX. |
| 1.3.6.1.4.1.4874.2.2.8.1.6.2 | TablejuniAtmSubIfLocationTable | not-accessible | current | The entries in this table report the ifIndex of ATM Subinterfaces by location. |
| 1.3.6.1.4.1.4874.2.2.8.1.6.2.1 | RowjuniAtmSubIfLocationEntry | not-accessible | current | A specification of ATM subinterfaces by location. |
| 1.3.6.1.4.1.4874.2.2.8.1.6.2.1.1 | ColumnjuniAtmSubIfLocationIndex | not-accessible | current | The value of a platform interface location. |
| 1.3.6.1.4.1.4874.2.2.8.1.6.2.1.2 | ColumnjuniAtmSubIfLocationIfIndex | read-only | current | The ifIndex value of this subinterface. |
| 1.3.6.1.4.1.4874.2.2.8.1.7 | NodejuniAtmVcClass | |||
| 1.3.6.1.4.1.4874.2.2.8.1.7.1 | TablejuniAtmVcClassNameTable | not-accessible | current | The entries in this table provide mappings of ATM VC class names to local integer identifiers. These integers are used as indexes into other MIB tables contain… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.1.1 | RowjuniAtmVcClassNameEntry | not-accessible | current | A mapping of ATM VC class name to an integer identifier for the ATM VC class. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.1.1.1 | ColumnjuniAtmVcClassName | read-only | current | The ATM VC class name uniquely identifying this entry. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.1.1.2 | ColumnjuniAtmVcClassNameRowStatus | read-create | current | Controls creation/deletion of entries in this table. Only the values 'createAndGo' ,'destroy', 'active' and 'notInService' may be SET. The SNMP manager would s… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.1.1.3 | ColumnjuniAtmVcClassNameId | read-only | current | The integer identifier associated with this VC class name. The value of this identifier is assigned by the device when an entry in this table is created. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.2 | TablejuniAtmVcClassIdTable | not-accessible | current | Provides inverse mapping of ATM VC class IDs to ATM VC class names. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.2.1 | RowjuniAtmVcClassIdEntry | not-accessible | current | A mapping of an integer identifier to an ATM VC class name. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.2.1.1 | ColumnjuniAtmVcClassIdId | not-accessible | current | The integer identifier associated with this ATM VC class name. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.2.1.2 | ColumnjuniAtmVcClassIdName | read-only | current | The ATM VC class name having the associated identifier. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3 | TablejuniAtmVcClassTable | not-accessible | current | This table contains Juniper ATM VC Class entries which can be used to specify the ATM PVC attributes either at creation or modification time. A row in this tab… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1 | RowjuniAtmVcClassEntry | not-accessible | current | Each entry contains the attributes of the ATM VC which would be applied to the VC either at creation or modification time when this ATM VC class is associated … |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.1 | ColumnjuniAtmVcClassId | not-accessible | current | The integer identifier associated with this ATM VC class. A value for this identifier is determined by locating or creating an ATM VC class name in the juniAtm… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.2 | ColumnjuniAtmVcClassVccType | read-write | current | Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. The 'aut… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.3 | ColumnjuniAtmVcClassVccServiceCategory | read-write | current | Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-RealTime Variable … |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.4 | ColumnjuniAtmVcClassVccPcr | read-write | current | Peak Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAtmVcClassVccServiceCategory is configured to have one… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.5 | ColumnjuniAtmVcClassVccScr | read-write | current | Sustained Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAtmVcClassVccServiceCategory is configured to hav… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.6 | ColumnjuniAtmVcClassVccMbs | read-write | current | Maximum Burst Size, in cells, of this circuit. This parameter is only required when juniAtmVcClassVccServiceCategory is configured to have the following value:… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.7 | ColumnjuniAtmVcClassVccOamAdminStatus | read-write | current | The OAM VC integrity administrative state of the ATM VC associated with this class. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.8 | ColumnjuniAtmVcClassVccOamLoopbackFrequency | read-write | current | The OAM loopback frequency in seconds. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.9 | ColumnjuniAtmVcClassVccOamUpCount | read-write | current | Specifies the number of successive loopback cell responses to receive before the ATM VC associated with this class is declared up for connectivity verification. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.10 | ColumnjuniAtmVcClassVccOamDownCount | read-write | current | Specifies the number of successive loopback cell responses not received before declaring the ATM VC associated with this class as down for connectivity verific… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.11 | ColumnjuniAtmVcClassVccOamRetryFrequency | read-write | current | Specifies the frequency (in seconds) to transmit loopback cells when verifying the ATM VC operational state associated with this class (up or down) for connect… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.12 | ColumnjuniAtmVcClassVccOamAlarmDownCount | read-write | current | Specifies the number of successive alarm (AIS or RDI) cells to receive before declaring the ATM VC associated with class as down. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.13 | ColumnjuniAtmVcClassVccOamAlarmClearTimeout | read-write | current | Specifies how long to wait (in seconds) before declaring the ATM VC associated with class as up after it has stopped receiving alarm cells. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.14 | ColumnjuniAtmVcClassVccInverseArp | read-write | current | Enables the inverse ARP protocol on the ATM VC associated with this class; true(1) enables the protocol, false(2) disables it. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.15 | ColumnjuniAtmVcClassVccInverseArpRefresh | read-write | current | The refresh rate in minutes between inverse ARP protocol messages. |
| 1.3.6.1.4.1.4874.2.2.8.3 | NodejuniAtmTraps | |||
| 1.3.6.1.4.1.4874.2.2.8.3.0 | NodejuniAtmTrapPrefix | |||
| 1.3.6.1.4.1.4874.2.2.8.3.0.1 | NotificationjuniAtmVpPingTestCompleted | current | Generated at the completion of a AtmfM4VpTest when the corresponding juniAtmVpPingCtlTrapGeneration object has the testCompletion(0) bit set. | |
| 1.3.6.1.4.1.4874.2.2.8.3.0.2 | NotificationjuniAtmVcPingTestCompleted | current | Generated at the completion of a AtmfM4VcTest when the corresponding juniAtmVcPingCtlTrapGeneration object has the testCompletion(0) bit set. | |
| 1.3.6.1.4.1.4874.2.2.8.4 | NodejuniAtmConformance | |||
| 1.3.6.1.4.1.4874.2.2.8.4.1 | NodejuniAtmCompliances | |||
| 1.3.6.1.4.1.4874.2.2.8.4.1.1 | CompliancejuniAtmCompliance | obsolete | Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when support was added for NBMA map lists and AT… | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.2 | CompliancejuniAtmCompliance2 | obsolete | Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when support was added for traffic shapping on V… | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.3 | CompliancejuniAtmCompliance3 | obsolete | Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when support was added for connection admission … | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.4 | CompliancejuniAtmCompliance4 | obsolete | Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when ATM SVC, CAC used bandwidth and sub-interfa… | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.5 | CompliancejuniAtmCompliance5 | obsolete | Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when CAC recieve bandwith and E164 public addres… | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.6 | CompliancejuniAtmCompliance6 | obsolete | Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when F4 flow OAM circuit config and stats tables… | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.7 | CompliancejuniAtmCompliance7 | obsolete | Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when the juniAtmLocationGroup was added. | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.8 | CompliancejuniAtmCompliance8 | obsolete | Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when support was added to export the subinterfac… | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.9 | CompliancejuniAtmCompliance9 | obsolete | Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement was obsoleted when the juniAtmMartiniGroup was added. | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.10 | CompliancejuniAtmCompliance10 | obsolete | Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when juniAtmIfCacAvailableBandwidthRx, juniAtmIf… | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.11 | CompliancejuniAtmCompliance11 | obsolete | Obsolete compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when juniAtmGroup8 was added. | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.12 | CompliancejuniAtmCompliance12 | obsolete | The compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when juniAtmVpStatsGroup was added. | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.13 | CompliancejuniAtmCompliance13 | obsolete | The compliance statement for entities which implement the Juniper ATM MIB. This statement became obsolete when SVC support was removed. | |
| 1.3.6.1.4.1.4874.2.2.8.4.1.14 | CompliancejuniAtmCompliance14 | current | The compliance statement for entities which implement the Juniper ATM MIB. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2 | NodejuniAtmGroups | |||
| 1.3.6.1.4.1.4874.2.2.8.4.2.1 | GroupjuniAtmGroup | obsolete | Obsolete collection of objects providing management of ATM interfaces in a Juniper product. This group became obsolete when the juniAtmIfMapGroup object was ad… | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.2 | GroupjuniAtmAal5Group | current | A collection of objects providing management of AAL5 interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.3 | GroupjuniAtmSubIfGroup | obsolete | Obsolete collection of objects providing management of ATM subinterfaces in a Juniper product. This group became obsolete when juniAtmSubIfNbma, juniAtmSubIfIn… | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.4 | GroupjuniAtmVpTunnelGroup | current | A collection of objects providing management of VP tunnels in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.5 | GroupjuniAtmNbmaMapGroup | current | A collection of object providing management of NBMA in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.6 | GroupjuniAtmSubIfGroup2 | obsolete | Obsolete collection of objects providing management of ATM subinterfaces in a Juniper product. This group became obsolete when juniAtmSubIfAddress was added. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.7 | GroupjuniAtmVpPingControlGroup | current | A collection of object providing management of ATM VPL Ping testing in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.8 | GroupjuniAtmVcPingControlGroup | current | A collection of object providing management of ATM VCL Ping testing in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.9 | GroupjuniAtmPingTrapGroup | current | A collection of notifications supporting ATM Ping testing in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.10 | GroupjuniAtmGroup2 | obsolete | Obsolete collection of objects providing management of ATM interfaces in a Juniper product. This group became obsolete when support was added for connection ad… | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.11 | GroupjuniAtmTrafficShapingGroup | current | A collection of objects providing management of ATM traffic shaping in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.12 | GroupjuniAtmGroup3 | obsolete | Obsolete collection of objects providing management of ATM interfaces in a Juniper product. This group became obsolete when support was added for connection ad… | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.13 | GroupjuniAtmGroup4 | obsolete | Obsolete collection of objects providing management of ATM interfaces in a Juniper product. This group became obsolete when CAC recieve bandwith and E164 publi… | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.14 | GroupjuniAtmSvcGroup | obsolete | Obsolete collection of objects providing management of ATM SVC interfaces in a Juniper product. This group became obsolete when E164 public addressing support … | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.15 | GroupjuniAtmSubIfGroup3 | obsolete | Obsolete collection of objects providing management of ATM subinterfaces in a Juniper product. This group became obsolete when juniAtmSubIfMtu was added. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.16 | GroupjuniAtmGroup5 | obsolete | Obsolete collection of objects providing management of ATM interfaces in a Juniper product. This group became obsolete when ATM VP description support was adde… | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.17 | GroupjuniAtmSvcGroup2 | current | A collection of objects providing management of ATM SVC interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.18 | GroupjuniAtmPnniGroup | current | A collection of objects providing management of PNNI Routing Control Channels in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.19 | GroupjuniAtmSubIfGroup4 | obsolete | Obsolete collection of objects providing management of ATM subinterfaces in a Juniper product. This group became obsolete when support was added to export the … | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.20 | GroupjuniAtmF4OamCircuitGroup | obsolete | Obsolete collection of objects providing management of ATM F4 flow OAM circuits in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.21 | GroupjuniAtmGroup6 | obsolete | Obsolete collection of objects providing management of ATM interfaces in a Juniper product. This group became obsolete when bulk-configuration profile override… | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.22 | GroupjuniAtmLocationGroup | current | A collection of objects providing interface location information in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.23 | GroupjuniAtmSubIfGroup5 | obsolete | Obsolete collection of objects providing management of ATM subinterfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.24 | GroupjuniAtmMartiniGroup | current | A collection of objects providing ATM Martini cell aggregation configuration. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.25 | GroupjuniAtmGroup7 | obsolete | Obsolete collection of objects providing management of ATM interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.26 | GroupjuniAtmGroup8 | obsolete | A collection of objects providing management of ATM interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.27 | GroupjuniAtmVpStatsGroup | current | A collection of objects providing ATM VP level statistics. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.28 | GroupjuniAtmSubIfGroup6 | obsolete | Obsolete collection of objects providing management of ATM subinterfaces in a Juniper product. This group became obsolete when ATM SVC support was removed. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.29 | GroupjuniAtmF4OamCircuitGroup2 | current | A collection of objects providing management of ATM F4 flow OAM circuits in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.30 | GroupjuniAtmGroup9 | current | A collection of objects providing management of ATM interfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.31 | GroupjuniAtmSubIfGroup7 | current | A collection of objects providing management of ATM subinterfaces in a Juniper product. | |
| 1.3.6.1.4.1.4874.2.2.8.4.2.32 | GroupjuniAtmVcClassGroup | current | A collection of objects providing management of ATM VC class in a Juniper product. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| JuniAtmLocationType | INTEGER { unknown(0), slotPort(1) } | obsolete | Obsolete description of the platform-dependent interpretation of a JuniAtmLocationValue object. This textual convention has been relpaced by Juniper-TC.JuniInterfaceLocationType. |
| JuniAtmLocationValue | OCTET STRING (SIZE(1..16)) | obsolete | Obsolete value of a platform-dependent interface location, represented as an OCTET STRING. A corresponding JuniAtmLocationType object identified the mapping of octets to location elements, e.g. 'slot.port'. This textual… |
| JuniAtmNbmaMapName | OCTET STRING (SIZE(1..32)) | current | An administratively assigned map name. Represents textual information taken from the NVT ASCII character set. The name must be unique per system. |
| JuniAtmNbmaMapNameOrNull | OCTET STRING (SIZE(0..32)) | current | An administratively assigned map name. Represents textual information taken from the NVT ASCII character set. The name must be unique per system. Differs from JuniAtmNbmaMapName in that it permits a zero-length string. |