LANCOM-ROUTING-MIB
343 objects
The Broadcom Private MIB for FastPath Routing
Imported Objects
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| LANCOM-REF-MIB | fastPath |
| OSPF-MIB | ospfAreaEntry ospfIfEntry ospfVirtIfEntry RouterID |
| RFC1213-MIB | DisplayString PhysAddress |
| RIPv2-MIB | rip2IfConfEntry |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| VRRP-MIB | vrrpOperVrId |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2356.16.1.2 | IdentityfastPathRouting | The Broadcom Private MIB for FastPath Routing | ||
| 1.3.6.1.4.1.2356.16.1.2.1 | NodeagentSwitchArpGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.1.1 | ScalaragentSwitchArpAgeoutTime | read-write | current | Configures the ARP entry ageout time in seconds. Allowable range: 15-21600 |
| 1.3.6.1.4.1.2356.16.1.2.1.2 | ScalaragentSwitchArpResponseTime | read-write | current | Configures the ARP request response timeout in seconds. Allowable range: 1-10 |
| 1.3.6.1.4.1.2356.16.1.2.1.3 | ScalaragentSwitchArpMaxRetries | read-write | current | Configures the ARP count of maximum request for retries. Allowable range: 0-10 |
| 1.3.6.1.4.1.2356.16.1.2.1.4 | ScalaragentSwitchArpCacheSize | read-write | current | Configures the ARP maximum number of entries in the cache. Allowable range is platform-specific. |
| 1.3.6.1.4.1.2356.16.1.2.1.5 | ScalaragentSwitchArpDynamicRenew | read-write | current | This indicates the current setting of ARP dynamic renew mode. |
| 1.3.6.1.4.1.2356.16.1.2.1.6 | ScalaragentSwitchArpTotalEntryCountCurrent | read-only | current | Current number of entries in the ARP cache. |
| 1.3.6.1.4.1.2356.16.1.2.1.7 | ScalaragentSwitchArpTotalEntryCountPeak | read-only | current | Peak number of entries recorded in the ARP cache over time. This value is restarted whenever the ARP cache size is changed. |
| 1.3.6.1.4.1.2356.16.1.2.1.8 | ScalaragentSwitchArpStaticEntryCountCurrent | read-only | current | Current number of configured static ARP entries. |
| 1.3.6.1.4.1.2356.16.1.2.1.9 | ScalaragentSwitchArpStaticEntryCountMax | read-only | current | Maximum number of configurable static ARP entries. |
| 1.3.6.1.4.1.2356.16.1.2.1.10 | TableagentSwitchArpTable | not-accessible | obsolete | This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information. |
| 1.3.6.1.4.1.2356.16.1.2.1.10.1 | RowagentSwitchArpEntry | not-accessible | obsolete | |
| 1.3.6.1.4.1.2356.16.1.2.1.10.1.1 | ColumnagentSwitchArpAge | read-only | obsolete | This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries a… |
| 1.3.6.1.4.1.2356.16.1.2.1.10.1.2 | ColumnagentSwitchArpIpAddress | read-only | obsolete | The IP Address assigned to each interface. |
| 1.3.6.1.4.1.2356.16.1.2.1.10.1.3 | ColumnagentSwitchArpMacAddress | read-create | obsolete | The hardware MAX Address that each interface maps to. |
| 1.3.6.1.4.1.2356.16.1.2.1.10.1.4 | ColumnagentSwitchArpInterface | read-create | obsolete | The Associated IfIndex which identified the ARP Entry. |
| 1.3.6.1.4.1.2356.16.1.2.1.10.1.5 | ColumnagentSwitchArpType | read-only | obsolete | The type of ARP entry. |
| 1.3.6.1.4.1.2356.16.1.2.1.10.1.6 | ColumnagentSwitchArpStatus | read-write | obsolete | The status of this ARP entry. Setting this object destroy will remove the entry. |
| 1.3.6.1.4.1.2356.16.1.2.1.11 | TableagentSwitchLocalProxyArpTable | not-accessible | current | This table contains the per-interface configuration parameters for Local Proxy Arp. |
| 1.3.6.1.4.1.2356.16.1.2.1.11.1 | RowagentSwitchLocalProxyArpEntry | not-accessible | current | Represents a logical row in the agentSwitchLocalProxyArpTable |
| 1.3.6.1.4.1.2356.16.1.2.1.11.1.1 | ColumnagentSwitchLocalProxyArpMode | read-write | current | The Local Proxy Arp Mode for the interface. |
| 1.3.6.1.4.1.2356.16.1.2.1.12 | TableagentSwitchIntfArpTable | not-accessible | current | This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information. |
| 1.3.6.1.4.1.2356.16.1.2.1.12.1 | RowagentSwitchIntfArpEntry | not-accessible | current | |
| 1.3.6.1.4.1.2356.16.1.2.1.12.1.1 | ColumnagentSwitchIntfArpIpAddress | not-accessible | current | The Type of Address assigned to this interface. |
| 1.3.6.1.4.1.2356.16.1.2.1.12.1.2 | ColumnagentSwitchIntfArpIfIndex | not-accessible | current | The Associated IfIndex which identified the ARP Entry. This value must be specified for static ARP entries on an unnumbered interface |
| 1.3.6.1.4.1.2356.16.1.2.1.12.1.3 | ColumnagentSwitchIntfArpAge | read-only | current | This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries a… |
| 1.3.6.1.4.1.2356.16.1.2.1.12.1.4 | ColumnagentSwitchIntfArpMacAddress | read-create | current | The hardware MAX Address that each interface maps to. |
| 1.3.6.1.4.1.2356.16.1.2.1.12.1.5 | ColumnagentSwitchIntfArpType | read-only | current | The type of ARP entry. |
| 1.3.6.1.4.1.2356.16.1.2.1.12.1.6 | ColumnagentSwitchIntfArpStatus | read-create | current | The status of this ARP entry. Setting this object destroy will remove the entry. |
| 1.3.6.1.4.1.2356.16.1.2.2 | NodeagentSwitchIpGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.2.1 | ScalaragentSwitchIpRoutingMode | read-write | current | Administratively enables/disables routing on the switch. |
| 1.3.6.1.4.1.2356.16.1.2.2.2 | ScalaragentSwitchIpDefaultGateway | read-write | current | Specifies the Default Gateway manually configured. |
| 1.3.6.1.4.1.2356.16.1.2.2.3 | TableagentSwitchIpInterfaceTable | not-accessible | current | |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1 | RowagentSwitchIpInterfaceEntry | not-accessible | current | |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.1 | ColumnagentSwitchIpInterfaceIfIndex | read-only | current | The IfIndex associated with this instance. |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.2 | ColumnagentSwitchIPAddressConfigMethod | read-write | current | The Source of the IP Address. User can set the object to none(0) or dhcp(2). Option dhcp(2) enables Dhcp Client on the interface. Option none(0) disables Dhcp … |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.3 | ColumnagentSwitchIpInterfaceIpAddress | read-write | current | The IpAddress assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceNetMask must be set at the same time. |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.4 | ColumnagentSwitchIpInterfaceNetMask | read-write | current | The NetMask assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceIpAddress must be set at the same time. |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.5 | ColumnagentSwitchIpInterfaceClearIp | read-write | current | Sets the interfaces IpAddress and NetMask back to 0.0.0.0 |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.6 | ColumnagentSwitchIpInterfaceRoutingMode | read-write | current | Enables or disables routing for this interface. |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.7 | ColumnagentSwitchIpInterfaceProxyARPMode | read-write | current | Enables or disables Proxy ARP for this interface. |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.8 | ColumnagentSwitchIpInterfaceMtuValue | read-write | current | Configures the MTU value for this interface. The applicable range is 68 to the <interface MTU value - 18>, in bytes. Get of this object returns the effective M… |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.9 | ColumnagentSwitchIpInterfaceBandwidth | read-write | current | Configures the Bandwidth value for this interface. If the value returned is 0 bandwidth for this interface is not Configured. |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.10 | ColumnagentSwitchIpInterfaceUnnumberedIfIndex | read-write | current | If this object is non-zero, it indicates that the interface is unnumbered, and specifies which interface the address is borrowed from. |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.11 | ColumnagentSwitchIpInterfaceIcmpUnreachables | read-write | current | If this object is enable, it indicates that ICMP unreachables can be sent on this interface. |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.12 | ColumnagentSwitchIpInterfaceIcmpRedirects | read-write | current | If this object is enable and agentSwitchIpIcmpRedirectsMode is also enable ICMP Redirects can be sent on this interface. |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.13 | ColumnagentSwitchDhcpOperation | read-write | current | Renew or Release the IP Address learned through DHCP. Get on this object always gives none. none means no operation is performed on dhcp. |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.14 | ColumnagentSwitchIpInterfaceSuppressed | read-only | current | This mib variable contains the following values, which has the meaning as: 'unsuppressed' - The interface is not suppressed 'suppressed' - The interface is sup… |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.15 | ColumnagentSwitchIpInterfaceNumberOfFlaps | read-only | current | This mib variable displays the number of flaps occurred on the interface |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.16 | ColumnagentSwitchIpInterfaceCurrentPenalty | read-only | current | This mib variable displays the current penalty of an interface |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.17 | ColumnagentSwitchIpInterfaceReUseTime | read-only | current | This mib variable displays the number of seconds until the interface is allowed to come up |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.18 | ColumnagentSwitchIpInterfaceAutoStateMode | read-write | current | Enables or disables auto-state for this interface. This mode applies to VLAN routing interfaces only. |
| 1.3.6.1.4.1.2356.16.1.2.2.3.1.19 | ColumnagentSwitchIpInterfaceFptiName | read-only | current | A textual string containing the name of a FPTI Instance. |
| 1.3.6.1.4.1.2356.16.1.2.2.4 | TableagentSwitchIpRouterDiscoveryTable | not-accessible | current | There is no global administrative flag for router discovery. The global routing flag (agentSwitchIpRoutingMode) will be used for this purpose. If routing is di… |
| 1.3.6.1.4.1.2356.16.1.2.2.4.1 | RowagentSwitchIpRouterDiscoveryEntry | not-accessible | current | |
| 1.3.6.1.4.1.2356.16.1.2.2.4.1.1 | ColumnagentSwitchIpRouterDiscoveryIfIndex | read-only | current | Interface Number to configure Router Discovery on. |
| 1.3.6.1.4.1.2356.16.1.2.2.4.1.2 | ColumnagentSwitchIpRouterDiscoveryAdvertiseMode | read-write | current | Enable or disable router discovery on the interface. |
| 1.3.6.1.4.1.2356.16.1.2.2.4.1.3 | ColumnagentSwitchIpRouterDiscoveryMaxAdvertisementInterval | read-write | current | Maximum time allowed between sending router advertisements from the interface. |
| 1.3.6.1.4.1.2356.16.1.2.2.4.1.4 | ColumnagentSwitchIpRouterDiscoveryMinAdvertisementInterval | read-write | current | Minimum time allowed between sending router advertisements from the interface. This value must be less than or equal to agentSwitchIpRouterDiscoveryMaxAdvertis… |
| 1.3.6.1.4.1.2356.16.1.2.2.4.1.5 | ColumnagentSwitchIpRouterDiscoveryAdvertisementLifetime | read-write | current | Value of lifetime field of router advertsisement sent from the interface. This value must be greater than or equal to agentSwitchIpRouterDiscoveryMaxAdvertisem… |
| 1.3.6.1.4.1.2356.16.1.2.2.4.1.6 | ColumnagentSwitchIpRouterDiscoveryPreferenceLevel | read-write | current | Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher t… |
| 1.3.6.1.4.1.2356.16.1.2.2.4.1.7 | ColumnagentSwitchIpRouterDiscoveryAdvertisementAddress | read-write | current | Address used when sending router advertisements from the interface. |
| 1.3.6.1.4.1.2356.16.1.2.2.5 | TableagentSwitchIpVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.2356.16.1.2.2.5.1 | RowagentSwitchIpVlanEntry | not-accessible | current | A Static VLAN for which routing can be enabled/disabled |
| 1.3.6.1.4.1.2356.16.1.2.2.5.1.1 | ColumnagentSwitchIpVlanId | read-only | current | The Vlan's Id. |
| 1.3.6.1.4.1.2356.16.1.2.2.5.1.2 | ColumnagentSwitchIpVlanIfIndex | read-only | current | The IfIndex associated with this VLAN. |
| 1.3.6.1.4.1.2356.16.1.2.2.5.1.3 | ColumnagentSwitchIpVlanRoutingStatus | read-create | current | Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing |
| 1.3.6.1.4.1.2356.16.1.2.2.6 | TableagentSwitchSecondaryAddressTable | not-accessible | current | Contains a list of secondary IP Addresses associated with an interface. |
| 1.3.6.1.4.1.2356.16.1.2.2.6.1 | RowagentSwitchSecondaryAddressEntry | not-accessible | current | A secondary IP Address for a given interface. This IP Address must not conflict with the IP Address configured in the agentSwitchIpInterfaceTable. |
| 1.3.6.1.4.1.2356.16.1.2.2.6.1.1 | ColumnagentSwitchSecondaryIpAddress | not-accessible | current | The Secondary IP Address assigned to this interface. |
| 1.3.6.1.4.1.2356.16.1.2.2.6.1.2 | ColumnagentSwitchSecondaryNetMask | read-create | current | The Secondary Net Mask assigned to this interface. This value must be set during creation, and can not be changed. |
| 1.3.6.1.4.1.2356.16.1.2.2.6.1.3 | ColumnagentSwitchSecondaryStatus | read-create | current | Creates a new entry in the Secondary Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given i… |
| 1.3.6.1.4.1.2356.16.1.2.2.7 | TableagentSwitchHelperAddressTable | not-accessible | obsolete | Replaced by agentSwitchIntfIpHelperAddressTable. |
| 1.3.6.1.4.1.2356.16.1.2.2.7.1 | RowagentSwitchHelperAddressEntry | not-accessible | obsolete | A Helper IP Address for a given interface. |
| 1.3.6.1.4.1.2356.16.1.2.2.7.1.1 | ColumnagentSwitchHelperIpAddress | not-accessible | obsolete | The Helper IP Address assigned to this interface. |
| 1.3.6.1.4.1.2356.16.1.2.2.7.1.2 | ColumnagentSwitchHelperStatus | read-create | obsolete | Creates a new entry in the Helper Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given inte… |
| 1.3.6.1.4.1.2356.16.1.2.2.8 | NodeagentSwitchIpIcmpControlGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.2.8.1 | ScalaragentSwitchIpIcmpEchoReplyMode | read-write | current | Sets the administrative Echo Reply Mode. |
| 1.3.6.1.4.1.2356.16.1.2.2.8.2 | ScalaragentSwitchIpIcmpRedirectsMode | read-write | current | Sets the administrative Mode for sending Redirects. |
| 1.3.6.1.4.1.2356.16.1.2.2.8.3 | ScalaragentSwitchIpIcmpRateLimitInterval | read-write | current | Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit. |
| 1.3.6.1.4.1.2356.16.1.2.2.8.4 | ScalaragentSwitchIpIcmpRateLimitBurstSize | read-write | current | Specifies the number of tokens to be placed after timeout. |
| 1.3.6.1.4.1.2356.16.1.2.2.10 | TableagentSwitchIntfIpHelperAddressTable | not-accessible | current | Contains a list of IP helper addresses associated with an interface. |
| 1.3.6.1.4.1.2356.16.1.2.2.10.1 | RowagentSwitchIntfIpHelperAddressEntry | not-accessible | current | An IP helper address for a given interface. |
| 1.3.6.1.4.1.2356.16.1.2.2.10.1.1 | ColumnagentSwitchIntfIpHelperIpAddress | not-accessible | current | An IP helper address for packets received on this interface. An address of 0.0.0.0 identifies the entry as a discard entry. Packets that match a discard entry … |
| 1.3.6.1.4.1.2356.16.1.2.2.10.1.2 | ColumnagentSwitchIntfIpHelperUdpPort | not-accessible | current | UDP port number. Received packets with this destination UDP port number are forwarded to the helper address in this entry. |
| 1.3.6.1.4.1.2356.16.1.2.2.10.1.3 | ColumnagentSwitchIntfIpHelperDiscard | read-write | obsolete | Variable obsoleted. To create a discard entry, set the helper address to 0.0.0.0. |
| 1.3.6.1.4.1.2356.16.1.2.2.10.1.4 | ColumnagentSwitchIntfIpHelperHitCount | read-only | current | The number of times a packet has been forwarded or discarded according to this entry. |
| 1.3.6.1.4.1.2356.16.1.2.2.10.1.5 | ColumnagentSwitchIntfIpHelperStatus | read-create | current | Creates a new entry in the Helper Address table. Allowed values are: createAndGo(4) - Creates an IP helper entry in this table. destroy(6) - Removes the IP hel… |
| 1.3.6.1.4.1.2356.16.1.2.2.11 | ScalaragentSwitchClearIpDefaultGateway | read-write | current | Resets the Global Default Gateway address. |
| 1.3.6.1.4.1.2356.16.1.2.3 | NodeagentRouterRipConfigGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.3.1 | ScalaragentRouterRipAdminState | read-write | current | Sets the administrative mode of RIP in the router. |
| 1.3.6.1.4.1.2356.16.1.2.3.2 | ScalaragentRouterRipSplitHorizonMode | read-write | current | Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split… |
| 1.3.6.1.4.1.2356.16.1.2.3.3 | ScalaragentRouterRipAutoSummaryMode | read-write | current | Sets the RIP auto summarization mode in the router. A value of enable(1) means that routes advertized by this RIP router are combined, or summarized, whenever … |
| 1.3.6.1.4.1.2356.16.1.2.3.4 | ScalaragentRouterRipHostRoutesAcceptMode | read-write | current | Sets the RIP host route acceptance mode in the router. A value of enable(1) means that host routes advertized to this RIP router will be accepted (learned) int… |
| 1.3.6.1.4.1.2356.16.1.2.3.5 | ScalaragentRouterRipDefaultMetric | read-write | current | Default metric of redistributed routes, when RIP redistributes from other protocols. {0} indicates that the parameter is not configured, this value should not … |
| 1.3.6.1.4.1.2356.16.1.2.3.6 | ScalaragentRouterRipDefaultMetricConfigured | read-write | current | Flag to determine whether RIP default-metric is configured or not. Set to 'false' to unconfigure the default route metric. Set to 'true' is not allowed. |
| 1.3.6.1.4.1.2356.16.1.2.3.7 | ScalaragentRouterRipDefaultInfoOriginate | read-write | current | Flag to determine, whether RIP can advertise a default-route learned from another protocol. |
| 1.3.6.1.4.1.2356.16.1.2.3.8 | TableagentRipRouteRedistTable | not-accessible | current | This table contains the MIB objects required to configure route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be a… |
| 1.3.6.1.4.1.2356.16.1.2.3.8.1 | RowagentRipRouteRedistEntry | not-accessible | current | |
| 1.3.6.1.4.1.2356.16.1.2.3.8.1.1 | ColumnagentRipRouteRedistSource | read-only | current | Source route, from which RIP can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry. |
| 1.3.6.1.4.1.2356.16.1.2.3.8.1.2 | ColumnagentRipRouteRedistMode | read-write | current | User enabels/disables route-redistribution for a particular source protocol. |
| 1.3.6.1.4.1.2356.16.1.2.3.8.1.3 | ColumnagentRipRouteRedistMetric | read-write | current | Metric used for redistributing a particular source protocol route into RIP. {0} indicates that the parameter is not configured, this value should not be set. V… |
| 1.3.6.1.4.1.2356.16.1.2.3.8.1.4 | ColumnagentRipRouteRedistMetricConfigured | read-write | current | Flag to determine whether RIP redistribute-metric is configured or not. Set to 'false' to unconfigure redistribute metric. Set to 'true' is not allowed. |
| 1.3.6.1.4.1.2356.16.1.2.3.8.1.5 | ColumnagentRipRouteRedistMatchInternal | read-write | current | If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.2356.16.1.2.3.8.1.6 | ColumnagentRipRouteRedistMatchExternal1 | read-write | current | If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.2356.16.1.2.3.8.1.7 | ColumnagentRipRouteRedistMatchExternal2 | read-write | current | If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.2356.16.1.2.3.8.1.8 | ColumnagentRipRouteRedistMatchNSSAExternal1 | read-write | current | If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.2356.16.1.2.3.8.1.9 | ColumnagentRipRouteRedistMatchNSSAExternal2 | read-write | current | If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.2356.16.1.2.3.8.1.10 | ColumnagentRipRouteRedistDistList | read-write | current | Access-list number of the access-list, which filters routes received from a source-protocol. A value of 0 indicates no distribute list is configured. |
| 1.3.6.1.4.1.2356.16.1.2.3.8.1.11 | ColumnagentRipRouteRedistDistListConfigured | read-write | current | Flag to determine whether Access-list is configured or not. |
| 1.3.6.1.4.1.2356.16.1.2.3.9 | TableagentRip2IfConfTable | not-accessible | current | A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable in the RIPv2-MIB. |
| 1.3.6.1.4.1.2356.16.1.2.3.9.1 | RowagentRip2IfConfEntry | not-accessible | current | A Single Routing Domain in a single Subnet. Augments rip2IfConfEntry in RIPv2-MIB. |
| 1.3.6.1.4.1.2356.16.1.2.3.9.1.1 | ColumnagentRip2IfConfAuthKeyId | read-create | current | The identifier for the authentication key used on this interface. This field is only meaningful when the RIPv2-MIB rip2IfConfAuthType is md5(3); otherwise, the… |
| 1.3.6.1.4.1.2356.16.1.2.3.10 | ScalaragentRouterRipRoutePref | read-create | current | The route preference, sometimes called administrative distance, for RIP routes. A route with a preference of 255 is considered unreachable. |
| 1.3.6.1.4.1.2356.16.1.2.4 | NodeagentRouterOspfConfigGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.4.1 | ScalaragentOspfDefaultMetric | read-write | current | Default metric of redistributed routes, when OSPF redistributes from other protocols. {0} indicates that the parameter is not configured, this value should not… |
| 1.3.6.1.4.1.2356.16.1.2.4.2 | ScalaragentOspfDefaultMetricConfigured | read-write | current | Flag to determine whether OSPF default-metric is configured or not. Set to 'false' to unconfigure the OSPF default-metric. Set to 'true' is not allowed. |
| 1.3.6.1.4.1.2356.16.1.2.4.3 | ScalaragentOspfDefaultInfoOriginate | read-write | current | Flag to determine, whether OSPF can advertise a default-route learned from another protocol. |
| 1.3.6.1.4.1.2356.16.1.2.4.4 | ScalaragentOspfDefaultInfoOriginateAlways | read-write | current | When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding … |
| 1.3.6.1.4.1.2356.16.1.2.4.5 | ScalaragentOspfDefaultInfoOriginateMetric | read-write | current | Metric of the default route, which OSPF advertises when learned from other protocol. (0) indicates that the parameter is not configured, this value should not … |
| 1.3.6.1.4.1.2356.16.1.2.4.6 | ScalaragentOspfDefaultInfoOriginateMetricConfigured | read-write | current | Flag to determine whether OSPF default-info originate metric is configured or not. Setting to false unconfigures the default route metric. Setting to true is n… |
| 1.3.6.1.4.1.2356.16.1.2.4.7 | ScalaragentOspfDefaultInfoOriginateMetricType | read-write | current | Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2). |
| 1.3.6.1.4.1.2356.16.1.2.4.8 | TableagentOspfRouteRedistTable | not-accessible | current | This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be… |
| 1.3.6.1.4.1.2356.16.1.2.4.8.1 | RowagentOspfRouteRedistEntry | not-accessible | current | |
| 1.3.6.1.4.1.2356.16.1.2.4.8.1.1 | ColumnagentOspfRouteRedistSource | read-only | current | Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry. |
| 1.3.6.1.4.1.2356.16.1.2.4.8.1.2 | ColumnagentOspfRouteRedistMode | read-write | current | User enabels/disables route-redistribution for a particular source protocol. |
| 1.3.6.1.4.1.2356.16.1.2.4.8.1.3 | ColumnagentOspfRouteRedistMetric | read-write | current | Metric used for redistributing a particular source protocol route into OSPF. |
| 1.3.6.1.4.1.2356.16.1.2.4.8.1.4 | ColumnagentOspfRouteRedistMetricConfigured | read-write | current | Flag to determine whether OSPF redistribute-metric is configured or not. |
| 1.3.6.1.4.1.2356.16.1.2.4.8.1.5 | ColumnagentOspfRouteRedistMetricType | read-write | current | Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2). |
| 1.3.6.1.4.1.2356.16.1.2.4.8.1.6 | ColumnagentOspfRouteRedistTag | read-write | current | It specifies the tag field in routes redistributed by OSPF. |
| 1.3.6.1.4.1.2356.16.1.2.4.8.1.7 | ColumnagentOspfRouteRedistSubnets | read-write | current | If this value is false, then OSPF will not redistribute subnetted routes. |
| 1.3.6.1.4.1.2356.16.1.2.4.8.1.8 | ColumnagentOspfRouteRedistDistList | read-write | current | Access-list number of the access-list, which filters routes received from a source-protocol. |
| 1.3.6.1.4.1.2356.16.1.2.4.8.1.9 | ColumnagentOspfRouteRedistDistListConfigured | read-write | current | Flag to determine whether Access-list is configured or not. |
| 1.3.6.1.4.1.2356.16.1.2.4.9 | TableagentOspfIfTable | not-accessible | current | The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB. |
| 1.3.6.1.4.1.2356.16.1.2.4.9.1 | RowagentOspfIfEntry | not-accessible | current | The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB. |
| 1.3.6.1.4.1.2356.16.1.2.4.9.1.1 | ColumnagentOspfIfAuthKeyId | read-create | current | The identifier for the authentication key used on this interface. This field is only meaningful when the OSPF-MIB ospfIfAuthType is md5(2); otherwise, the valu… |
| 1.3.6.1.4.1.2356.16.1.2.4.9.1.2 | ColumnagentOspfIfIpMtuIgnoreFlag | read-write | current | Configures the IP MTU Ignore Flag value for this OSPF interface. |
| 1.3.6.1.4.1.2356.16.1.2.4.9.1.3 | ColumnagentOspfIfPassiveMode | read-write | current | Flag to determine whether the interface is passive. A passive interface will not participate in the OSPF adjacency formation. |
| 1.3.6.1.4.1.2356.16.1.2.4.9.1.4 | ColumnagentOspfIfAdvertiseSecondaries | read-write | current | Configures the advertisability of the secondary addresses configured on this interface. |
| 1.3.6.1.4.1.2356.16.1.2.4.10 | TableagentOspfVirtIfTable | not-accessible | current | Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB. |
| 1.3.6.1.4.1.2356.16.1.2.4.10.1 | RowagentOspfVirtIfEntry | not-accessible | current | Information about a single Virtual Interface. Augments ospfVirtIfEntry in OSPF-MIB. |
| 1.3.6.1.4.1.2356.16.1.2.4.10.1.1 | ColumnagentOspfVirtIfAuthKeyId | read-create | current | The identifier for the authentication key used on this virtual interface. This field is only meaningful when the OSPF-MIB ospfVirtIfAuthType is md5(2); otherwi… |
| 1.3.6.1.4.1.2356.16.1.2.4.11 | ScalaragentRouterOspfRFC1583CompatibilityMode | read-write | current | From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'e… |
| 1.3.6.1.4.1.2356.16.1.2.4.12 | ScalaragentOspfSpfDelayTime | read-write | current | Delay time (in seconds) between when OSPF receives a topology change and when it starts an SPF calculation. It can be an integer from 0 to 65535. The default t… |
| 1.3.6.1.4.1.2356.16.1.2.4.13 | ScalaragentOspfSpfHoldTime | read-write | current | Minimum time (in seconds) between two consecutive SPF calculations. It can be an integer from 0 to 65535. The default time is 10 seconds. A value of 0 means th… |
| 1.3.6.1.4.1.2356.16.1.2.4.14 | ScalaragentOspfAutoCostRefBw | read-write | current | Auto cost refernece bandwidth of the router interafaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth i… |
| 1.3.6.1.4.1.2356.16.1.2.4.15 | ScalaragentOspfOpaqueLsaSupport | read-write | current | The router's support for Opaque LSA types. This object is persistent and when written the entity SHOULD save the change to non-volatile storage. |
| 1.3.6.1.4.1.2356.16.1.2.4.16 | TableagentOspfAreaOpaqueLsdbTable | not-accessible | current | The OSPF Process's Area Link State Database (LSDB). The LSDB contains type-10 Link State Advertisements from throughout the areas that the device is attached t… |
| 1.3.6.1.4.1.2356.16.1.2.4.16.1 | RowagentOspfAreaOpaqueLsdbEntry | not-accessible | current | A single AreaOpaque Link State Advertisement. |
| 1.3.6.1.4.1.2356.16.1.2.4.16.1.1 | ColumnagentOspfAreaOpaqueLsdbAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.2356.16.1.2.4.16.1.2 | ColumnagentOspfAreaOpaqueLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.4.1.2356.16.1.2.4.16.1.3 | ColumnagentOspfAreaOpaqueLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.2356.16.1.2.4.16.1.4 | ColumnagentOspfAreaOpaqueLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.2356.16.1.2.4.16.1.5 | ColumnagentOspfAreaOpaqueLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.4.1.2356.16.1.2.4.16.1.6 | ColumnagentOspfAreaOpaqueLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.2356.16.1.2.4.16.1.7 | ColumnagentOspfAreaOpaqueLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.2356.16.1.2.4.16.1.8 | ColumnagentOspfAreaOpaqueLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size |
| 1.3.6.1.4.1.2356.16.1.2.4.17 | TableagentOspfLocalLsdbTable | not-accessible | current | The OSPF Process's Link-Local Link State Database for non-virtual links. This table is identical to the OSPF LSDB Table in format, but contains only Link-Local… |
| 1.3.6.1.4.1.2356.16.1.2.4.17.1 | RowagentOspfLocalLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.2356.16.1.2.4.17.1.1 | ColumnagentOspfLocalLsdbIpAddress | read-only | current | The IP Address of the interface from which the LSA was received if the interface is numbered. |
| 1.3.6.1.4.1.2356.16.1.2.4.17.1.2 | ColumnagentOspfLocalLsdbAddressLessIf | read-only | current | The Interface Index of the interface from which the LSA was received if the interface is unnumbered. |
| 1.3.6.1.4.1.2356.16.1.2.4.17.1.3 | ColumnagentOspfLocalLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.2356.16.1.2.4.17.1.4 | ColumnagentOspfLocalLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being… |
| 1.3.6.1.4.1.2356.16.1.2.4.17.1.5 | ColumnagentOspfLocalLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.2356.16.1.2.4.17.1.6 | ColumnagentOspfLocalLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.4.1.2356.16.1.2.4.17.1.7 | ColumnagentOspfLocalLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.2356.16.1.2.4.17.1.8 | ColumnagentOspfLocalLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.2356.16.1.2.4.17.1.9 | ColumnagentOspfLocalLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. Note that for variable length LSAs, SNMP agents may not be able to return the largest string size. |
| 1.3.6.1.4.1.2356.16.1.2.4.18 | TableagentOspfAsLsdbTable | not-accessible | current | The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is … |
| 1.3.6.1.4.1.2356.16.1.2.4.18.1 | RowagentOspfAsLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.2356.16.1.2.4.18.1.1 | ColumnagentOspfAsLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.2356.16.1.2.4.18.1.2 | ColumnagentOspfAsLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.2356.16.1.2.4.18.1.3 | ColumnagentOspfAsLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.2356.16.1.2.4.18.1.4 | ColumnagentOspfAsLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.4.1.2356.16.1.2.4.18.1.5 | ColumnagentOspfAsLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.2356.16.1.2.4.18.1.6 | ColumnagentOspfAsLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.2356.16.1.2.4.18.1.7 | ColumnagentOspfAsLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.2356.16.1.2.4.19 | ScalaragentOspfDefaultPassiveMode | read-write | current | Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPF adjacency formation. |
| 1.3.6.1.4.1.2356.16.1.2.4.20 | ScalaragentOspfRoutePrefIntraArea | read-write | current | The route preference, sometimes called administrative distance, for intra-area OSPFv2 routes. A route with a preference of 255 is considered unreachable. |
| 1.3.6.1.4.1.2356.16.1.2.4.21 | ScalaragentOspfRoutePrefInterArea | read-write | current | The route preference, sometimes called administrative distance, for inter-area OSPFv2 routes. A route with a preference of 255 is considered unreachable. |
| 1.3.6.1.4.1.2356.16.1.2.4.22 | ScalaragentOspfRoutePrefExternal | read-write | current | The route preference, sometimes called administrative distance, for external OSPFv2 routes. A route with a preference of 255 is considered unreachable. |
| 1.3.6.1.4.1.2356.16.1.2.5 | NodeagentSnmpTrapFlagsConfigGroupLayer3 | |||
| 1.3.6.1.4.1.2356.16.1.2.5.1 | ScalaragentSnmpVRRPNewMasterTrapFlag | read-write | current | This flag enables the sending of VRRP new master notification traps. |
| 1.3.6.1.4.1.2356.16.1.2.5.2 | ScalaragentSnmpVRRPAuthFailureTrapFlag | read-write | current | This flag enables the sending of VRRP authentication failure notification traps. |
| 1.3.6.1.4.1.2356.16.1.2.6 | NodeagentBootpDhcpRelayGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.6.1 | ScalaragentBootpDhcpRelayMaxHopCount | read-write | current | The BOOTP/DHCP Max Hop Count. The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16 assuming that the request is looped … |
| 1.3.6.1.4.1.2356.16.1.2.6.2 | ScalaragentBootpDhcpRelayForwardingIp | read-write | obsolete | DHCP server addresses are now configured through IP helper. |
| 1.3.6.1.4.1.2356.16.1.2.6.3 | ScalaragentBootpDhcpRelayForwardMode | read-write | obsolete | The DHCP relay admin mode is replaced by the IP helper admin mode. |
| 1.3.6.1.4.1.2356.16.1.2.6.4 | ScalaragentBootpDhcpRelayMinWaitTime | read-write | current | The BOOTP/DHCP Minimum Wait Time. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs' (seconds since client began boo… |
| 1.3.6.1.4.1.2356.16.1.2.6.5 | ScalaragentBootpDhcpRelayCircuitIdOptionMode | read-write | current | The BOOTP/DHCP Circuit ID Option Mode. This flag is set to enable/disable the network element to add/remove the DHCP Relay agent Circuit ID sub-options. |
| 1.3.6.1.4.1.2356.16.1.2.6.6 | ScalaragentBootpDhcpRelayNumOfRequestsReceived | read-only | obsolete | Replaced by IP helper statistics. |
| 1.3.6.1.4.1.2356.16.1.2.6.7 | ScalaragentBootpDhcpRelayNumOfRequestsForwarded | read-only | obsolete | Replaced by IP helper statistics. |
| 1.3.6.1.4.1.2356.16.1.2.6.8 | ScalaragentBootpDhcpRelayNumOfDiscards | read-only | obsolete | Replaced by IP helper statistics. |
| 1.3.6.1.4.1.2356.16.1.2.7 | NodeagentECMPGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.7.1 | ScalaragentECMPOspfMaxPaths | read-write | current | It sets the number of paths that OSPF can report for a given destination where maxpaths is platform-dependent. |
| 1.3.6.1.4.1.2356.16.1.2.8 | NodeagentRouterVrrpConfigGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.8.1 | ScalaragentRouterVrrpAdminState | read-write | current | Sets the administrative mode of VRRP in the router. |
| 1.3.6.1.4.1.2356.16.1.2.8.2 | TableagentRouterVrrpConfiguredTable | not-accessible | current | Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of `agentRouterVrrpConfiguredEntry' items. |
| 1.3.6.1.4.1.2356.16.1.2.8.2.1 | RowagentRouterVrrpConfiguredEntry | not-accessible | current | An entry in the table contains operational priority that is associated with a virtual router. |
| 1.3.6.1.4.1.2356.16.1.2.8.2.1.1 | ColumnagentRouterVrrpConfiguredPriority | read-only | current | This object specifies the value set by the vrrpOperPriority object. The GET operation on 'vrrpOperPriority' will be affected by both the tracking process and t… |
| 1.3.6.1.4.1.2356.16.1.2.9 | NodeagentVrrpOperations | |||
| 1.3.6.1.4.1.2356.16.1.2.9.1 | TableagentRouterVrrpOperTable | not-accessible | obsolete | Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of `agentRouterVrrpOperEntry' items. |
| 1.3.6.1.4.1.2356.16.1.2.9.1.1 | RowagentRouterVrrpOperEntry | not-accessible | obsolete | An entry in the table contains operational priority that is associated with a virtual router. |
| 1.3.6.1.4.1.2356.16.1.2.9.1.1.1 | ColumnagentRouterVrrpOperPriority | read-only | obsolete | This object specifies the operational priority of the VRRP router. This value will be afftected by both the tracking process and the configured priority set by… |
| 1.3.6.1.4.1.2356.16.1.2.10 | NodeagentRouterVrrpTrackGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.10.1 | TableagentRouterVrrpTrackIntfTable | not-accessible | current | Tracking table for a VRRP router which consists of agentRouterVrrpTrackIntfEntry items. |
| 1.3.6.1.4.1.2356.16.1.2.10.1.1 | RowagentRouterVrrpTrackIntfEntry | not-accessible | current | An entry in the table contains tracked IP interfaces associated with a virtual router. |
| 1.3.6.1.4.1.2356.16.1.2.10.1.1.1 | ColumnagentRouterVrrpTrackIntf | read-create | current | This object specifies the interface to be tracked. |
| 1.3.6.1.4.1.2356.16.1.2.10.1.1.2 | ColumnagentRouterVrrpTrackIfPrioDec | read-create | current | This object specifies the decrement priority of the VRRP router. |
| 1.3.6.1.4.1.2356.16.1.2.10.1.1.3 | ColumnagentRouterVrrpTrackIfState | read-only | current | This object specifies the IP state of the tracked interface for the virtual router. |
| 1.3.6.1.4.1.2356.16.1.2.10.1.1.4 | ColumnagentRouterVrrpTrackIfStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this obj… |
| 1.3.6.1.4.1.2356.16.1.2.10.2 | TableagentRouterVrrpTrackRouteTable | not-accessible | current | Tracking table for a VRRP router which consists of a 'agentRouterVrrpTrackRouteEntry' items. |
| 1.3.6.1.4.1.2356.16.1.2.10.2.1 | RowagentRouterVrrpTrackRouteEntry | not-accessible | current | An entry in the table contains tracked Routes associated with a virtual router. |
| 1.3.6.1.4.1.2356.16.1.2.10.2.1.1 | ColumnagentRouterVrrpTrackRtPfx | not-accessible | current | This object specifies the prefix of the route to be tracked. |
| 1.3.6.1.4.1.2356.16.1.2.10.2.1.2 | ColumnagentRouterVrrpTrackRtPfxLen | not-accessible | current | This object specifies prefix length of the route to be tracked. |
| 1.3.6.1.4.1.2356.16.1.2.10.2.1.3 | ColumnagentRouterVrrpTrackRtPrioDec | read-create | current | This object specifies the decrement priority of the VRRP router. |
| 1.3.6.1.4.1.2356.16.1.2.10.2.1.4 | ColumnagentRouterVrrpTrackRtReachable | read-only | current | This object specifies the reachability of the tracked route. |
| 1.3.6.1.4.1.2356.16.1.2.10.2.1.5 | ColumnagentRouterVrrpTrackRtStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this obj… |
| 1.3.6.1.4.1.2356.16.1.2.11 | NodeagentIpHelperGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.11.1 | ScalaragentIpHelperAdminMode | read-write | current | Administratively enable or disable IP helper. |
| 1.3.6.1.4.1.2356.16.1.2.11.2 | ScalaragentDhcpClientMsgsReceived | read-only | current | The Number of DHCP Requests Received. Total number of DHCP requests received from all clients. |
| 1.3.6.1.4.1.2356.16.1.2.11.3 | ScalaragentDhcpClientMsgsRelayed | read-only | current | The Number of DHCP Requests Forwarded. Total number of DHCP requests relayed to a server. |
| 1.3.6.1.4.1.2356.16.1.2.11.4 | ScalaragentDhcpServerMsgsReceived | read-only | current | The number of DHCP messages received from a server. |
| 1.3.6.1.4.1.2356.16.1.2.11.5 | ScalaragentDhcpServerMsgsRelayed | read-only | current | The number of DHCP messages relayed to a server. |
| 1.3.6.1.4.1.2356.16.1.2.11.6 | ScalaragentUdpClientMsgsReceived | read-only | current | The number of UDP messages received from all clients. |
| 1.3.6.1.4.1.2356.16.1.2.11.7 | ScalaragentUdpClientMsgsRelayed | read-only | current | The number of UDP messages relayed to a server. |
| 1.3.6.1.4.1.2356.16.1.2.11.8 | TableagentSwitchIpHelperAddressTable | not-accessible | current | Contains a list of IP helper addresses configured globally. |
| 1.3.6.1.4.1.2356.16.1.2.11.8.1 | RowagentSwitchIpHelperAddressEntry | not-accessible | current | An IP Helper address that applies to packets received on any interface. |
| 1.3.6.1.4.1.2356.16.1.2.11.8.1.1 | ColumnagentSwitchIpHelperAddress | read-write | current | The IP Helper address assigned to this interface. |
| 1.3.6.1.4.1.2356.16.1.2.11.8.1.2 | ColumnagentSwitchIpHelperUdpPort | read-write | current | UDP port number. |
| 1.3.6.1.4.1.2356.16.1.2.11.8.1.3 | ColumnagentSwitchIpHelperHitCount | read-only | current | The number of times a packet has been forwarded or discarded according to this entry. |
| 1.3.6.1.4.1.2356.16.1.2.11.8.1.4 | ColumnagentSwitchIpHelperStatus | read-create | current | Creates a new entry in the global IP Helper address table. Allowed values are: createAndGo(4) - Creates an IP helper entry in this table. destroy(6) - Removes … |
| 1.3.6.1.4.1.2356.16.1.2.11.9 | ScalaragentUdpClientMsgsTtlExpired | read-only | current | The number of UDP messages received with an expired TTL. |
| 1.3.6.1.4.1.2356.16.1.2.11.10 | ScalaragentUdpClientMsgsDiscarded | read-only | current | The number of UDP messages that matched a discard entry. |
| 1.3.6.1.4.1.2356.16.1.2.12 | NodeagentInternalVlanGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.12.1 | ScalaragentInternalVlanBase | read-write | current | The VLAN ID internally assigned to the first port-based routing interface. |
| 1.3.6.1.4.1.2356.16.1.2.12.2 | ScalaragentInternalVlanPolicy | read-write | current | Whether to search up or down from the base VLAN ID for a free VLAN ID to assign to a port-based routing interface. |
| 1.3.6.1.4.1.2356.16.1.2.12.3 | TableagentSwitchInternalVlanTable | not-accessible | current | Contains a list of VLAN IDs used internally for port-based routing interfaces. |
| 1.3.6.1.4.1.2356.16.1.2.12.3.1 | RowagentSwitchInternalVlanEntry | not-accessible | current | A VLAN ID internally assigned to a port-based routing interface. |
| 1.3.6.1.4.1.2356.16.1.2.12.3.1.1 | ColumnagentSwitchInternalVlanId | not-accessible | current | A VLAN ID internally assigned to a port-based routing interface. |
| 1.3.6.1.4.1.2356.16.1.2.12.3.1.2 | ColumnagentSwitchInternalVlanIfIndex | read-only | current | Interface index of port-based routing interface using this VLAN ID. |
| 1.3.6.1.4.1.2356.16.1.2.13 | NodeagentOspfQueueGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.13.1 | TableagentOspfQueueTable | not-accessible | current | Table lists information about OSPFv2 message queue utilization. |
| 1.3.6.1.4.1.2356.16.1.2.13.1.1 | RowagentOspfQueueEntry | not-accessible | current | Information on a specific OSPFv2 message queue. |
| 1.3.6.1.4.1.2356.16.1.2.13.1.1.1 | ColumnagentOspfQueueIndex | not-accessible | current | Index value for this message queue. |
| 1.3.6.1.4.1.2356.16.1.2.13.1.1.2 | ColumnagentOspfQueueName | read-only | current | Name of an OSPFv2 message queue. |
| 1.3.6.1.4.1.2356.16.1.2.13.1.1.3 | ColumnagentOspfQueueLength | read-only | current | The number of messages currently in the message queue. |
| 1.3.6.1.4.1.2356.16.1.2.13.1.1.4 | ColumnagentOspfQueueHigh | read-only | current | The high water mark of the number of messages in the message queue. |
| 1.3.6.1.4.1.2356.16.1.2.13.1.1.5 | ColumnagentOspfQueueDrops | read-only | current | The number of items dropped because the message queue was full. |
| 1.3.6.1.4.1.2356.16.1.2.13.1.1.6 | ColumnagentOspfQueueLimit | read-only | current | The maximum number of messages this queue can hold. |
| 1.3.6.1.4.1.2356.16.1.2.14 | NodeagentOspfPacketStatsGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.14.1 | ScalaragentOspfCountersCleared | read-only | current | The time since OSPFv2 counters were last cleared, in seconds. |
| 1.3.6.1.4.1.2356.16.1.2.14.2 | ScalaragentOspfLsaRetxCount | read-only | current | The total number of LSAs retransmitted since OSPF counters were last cleared. If the same LSA is retransmitted to multiple neighbors, the count is incremented … |
| 1.3.6.1.4.1.2356.16.1.2.14.3 | ScalaragentOspfHellosRx | read-only | current | The total number of OSPFv2 Hello packets received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.4 | ScalaragentOspfHellosTx | read-only | current | The total number of OSPFv2 Hello packets transmitted since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.5 | ScalaragentOspfDdRx | read-only | current | The total number of OSPFv2 Database Description packets received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.6 | ScalaragentOspfDdTx | read-only | current | The total number of OSPFv2 Database Description packets transmitted since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.7 | ScalaragentOspfLsReqRx | read-only | current | The total number of OSPFv2 LS Request packets received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.8 | ScalaragentOspfLsReqTx | read-only | current | The total number of OSPFv2 LS Request packets transmitted since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.9 | ScalaragentOspfLsUpdatesRx | read-only | current | The total number of OSPFv2 LS Update packets received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.10 | ScalaragentOspfLsUpdatesTx | read-only | current | The total number of OSPFv2 LS Update packets transmitted since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.11 | ScalaragentOspfLsAckRx | read-only | current | The total number of OSPFv2 LS Acknowledgement packets received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.12 | ScalaragentOspfLsAckTx | read-only | current | The total number of OSPFv2 LS Acknowledgement packets transmitted since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.13 | ScalaragentOspfLsUpdatesRxMax | read-only | current | The maximum rate of OSPFv2 LS Update packets received over any 5-second interval since OSPF counters were last cleared. The rate is given in packets per second… |
| 1.3.6.1.4.1.2356.16.1.2.14.14 | ScalaragentOspfLsUpdatesTxMax | read-only | current | The maximum rate of OSPFv2 LS Update packets transmitted over any 5-second interval since OSPF counters were last cleared. The rate is given in packets per sec… |
| 1.3.6.1.4.1.2356.16.1.2.14.15 | ScalaragentOspfType1LsasRx | read-only | current | The number of type 1 (router) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.16 | ScalaragentOspfType2LsasRx | read-only | current | The number of type 2 (network) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.17 | ScalaragentOspfType3LsasRx | read-only | current | The number of type 3 (network summary) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.18 | ScalaragentOspfType4LsasRx | read-only | current | The number of type 4 (ASBR summary) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.19 | ScalaragentOspfType5LsasRx | read-only | current | The number of type 5 (external) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.20 | ScalaragentOspfType7LsasRx | read-only | current | The number of type 7 (NSSA external) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.21 | ScalaragentOspfType9LsasRx | read-only | current | The number of type 9 (Link Opaque) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.22 | ScalaragentOspfType10LsasRx | read-only | current | The number of type 10 (Area Opaque) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.14.23 | ScalaragentOspfType11LsasRx | read-only | current | The number of type 11 (AS Opaque) LSAs received since OSPF counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.15 | TableagentOspfSpfStatsTable | not-accessible | current | Contains statistics for the twenty most recent SPF runs. Statistics are reported from the oldest SPF first to the most recent. |
| 1.3.6.1.4.1.2356.16.1.2.15.1 | RowagentOspfSpfStatsEntry | not-accessible | current | Statistics for a single SPF run. |
| 1.3.6.1.4.1.2356.16.1.2.15.1.1 | ColumnagentOspfSpfIndex | not-accessible | current | Integer that uniquely identifies an SPF run. This value is incremented each time OSPF runs a full routing table calculation. |
| 1.3.6.1.4.1.2356.16.1.2.15.1.2 | ColumnagentOspfSpfStatsDeltaT | read-only | current | How long since this routing table calculation ran. The time is given in seconds. |
| 1.3.6.1.4.1.2356.16.1.2.15.1.3 | ColumnagentOspfSpfStatsIntra | read-only | current | Number of milliseconds to compute intra-area routes. |
| 1.3.6.1.4.1.2356.16.1.2.15.1.4 | ColumnagentOspfSpfStatsSumm | read-only | current | Number of milliseconds to compute inter-area routes. |
| 1.3.6.1.4.1.2356.16.1.2.15.1.5 | ColumnagentOspfSpfStatsExt | read-only | current | Number of milliseconds to compute external routes. |
| 1.3.6.1.4.1.2356.16.1.2.15.1.6 | ColumnagentOspfSpfStatsSpfTotal | read-only | current | Number of milliseconds for entire routing table calculation. |
| 1.3.6.1.4.1.2356.16.1.2.15.1.7 | ColumnagentOspfSpfStatsRibUpdate | read-only | current | Number of milliseconds to update the common routing table. |
| 1.3.6.1.4.1.2356.16.1.2.15.1.8 | ColumnagentOspfSpfStatsReason | read-only | current | Reasons why a routing table calculation was required. R - new router LSA, N - new Network LSA, SN - new network summary LSA, SA - new ASBR summary LSA, X - new… |
| 1.3.6.1.4.1.2356.16.1.2.16 | NodeagentRoutingHeapGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.16.1 | ScalaragentRoutingHeapSize | read-only | current | The size of the routing heap, in bytes. Unicast routing protocols and ARP allocate memory from the routing heap. |
| 1.3.6.1.4.1.2356.16.1.2.16.2 | ScalaragentRoutingHeapInUse | read-only | current | The number of bytes currently allocated from the routing heap. |
| 1.3.6.1.4.1.2356.16.1.2.16.3 | ScalaragentRoutingHeapHigh | read-only | current | High water mark for the number of bytes allocated from the routing heap. |
| 1.3.6.1.4.1.2356.16.1.2.17 | NodeagentRoutingTableSummaryGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.17.1 | ScalaragentConnectedRoutes | read-only | current | The number of connected routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.2 | ScalaragentStaticRoutes | read-only | current | The number of static routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.3 | ScalaragentRipRoutes | read-only | current | The number of RIP routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.4 | ScalaragentOspfRoutes | read-only | current | The number of OSPFv2 routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.5 | ScalaragentOspfIntraRoutes | read-only | current | The number of OSPFv2 intra-area routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.6 | ScalaragentOspfInterRoutes | read-only | current | The number of OSPFv2 inter-area routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.7 | ScalaragentOspfExt1Routes | read-only | current | The number of OSPFv2 external type 1 routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.8 | ScalaragentOspfExt2Routes | read-only | current | The number of OSPFv2 external type 2 routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.9 | ScalaragentBgpRoutes | read-only | current | The number of BGP routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.10 | ScalaragentEbgpRoutes | read-only | current | The number of external BGP routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.11 | ScalaragentIbgpRoutes | read-only | current | The number of internal BGP routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.12 | ScalaragentLocalBgpRoutes | read-only | current | The number of local BGP routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.13 | ScalaragentRejectRoutes | read-only | current | The number of reject routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.14 | ScalaragentTotalRoutes | read-only | current | The number of routes in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.15 | ScalaragentBestRoutes | read-only | current | The number of IPv4 routes in the forwarding table. |
| 1.3.6.1.4.1.2356.16.1.2.17.16 | ScalaragentBestRoutesHigh | read-only | current | The highest number of IPv4 routes in the forwarding table. |
| 1.3.6.1.4.1.2356.16.1.2.17.17 | ScalaragentAlternateRoutes | read-only | current | The number of alternate routes in the IPv4 routing table. An alternate route is less preferred than the best route and is not used for forwarding. |
| 1.3.6.1.4.1.2356.16.1.2.17.18 | ScalaragentRouteAdds | read-only | current | The number of routes added to the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.19 | ScalaragentRouteModifies | read-only | current | The number of routes changed in the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.20 | ScalaragentRouteDeletes | read-only | current | The number of routes removed from the IPv4 routing table. |
| 1.3.6.1.4.1.2356.16.1.2.17.21 | ScalaragentUnresolvedRouteAdds | read-only | current | The number of IPv4 route adds that failed because none of the route's next hops were on a local subnet. |
| 1.3.6.1.4.1.2356.16.1.2.17.22 | ScalaragentInvalidRouteAdds | read-only | current | The number of IPv4 routes adds that failed because the route was invalid. |
| 1.3.6.1.4.1.2356.16.1.2.17.23 | ScalaragentFailedRouteAdds | read-only | current | The number of IPv4 routes adds that failed because of a resource limitation in the routing table |
| 1.3.6.1.4.1.2356.16.1.2.17.24 | ScalaragentReservedLocals | read-only | current | The number of IPv4 routing table entries reserved for a local subnet on a routing interface that is down. |
| 1.3.6.1.4.1.2356.16.1.2.17.25 | ScalaragentUniqueNextHops | read-only | current | The number of distinct next hops used among all IPv4 routes currently in the routing table. These include local interfaces for local routes and neighbors for i… |
| 1.3.6.1.4.1.2356.16.1.2.17.26 | ScalaragentUniqueNextHopsHigh | read-only | current | The highest count of unique next hops since counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.17.27 | ScalaragentNextHopGroups | read-only | current | The current number of next hop groups in use by one or more routes. Each next hop group includes one or more next hops. |
| 1.3.6.1.4.1.2356.16.1.2.17.28 | ScalaragentNextHopGroupsHigh | read-only | current | The highest count of next hop groups since counters were last cleared. |
| 1.3.6.1.4.1.2356.16.1.2.17.29 | ScalaragentEcmpGroups | read-only | current | The number of next hop groups with multiple next hops. |
| 1.3.6.1.4.1.2356.16.1.2.17.30 | ScalaragentEcmpGroupsHigh | read-only | current | The high water mark of the number of ECMP groups. |
| 1.3.6.1.4.1.2356.16.1.2.17.31 | ScalaragentEcmpRoutes | read-only | current | The current number of IPv4 routes with multiple next hops. |
| 1.3.6.1.4.1.2356.16.1.2.17.32 | ScalaragentTruncEcmpRoutes | read-only | current | The number of ECMP routes that are currently installed in the forwarding table with just one next hop. The forwarding table may limit the number of ECMP routes… |
| 1.3.6.1.4.1.2356.16.1.2.17.33 | ScalaragentEcmpRetries | read-only | current | The number of ECMP routes that have been installed in the forwarding table after initially being installed with a single next hop. |
| 1.3.6.1.4.1.2356.16.1.2.18 | TableagentEcmpCountTable | not-accessible | current | A count of the number of routes with each number of ECMP next hops. |
| 1.3.6.1.4.1.2356.16.1.2.18.1 | RowagentEcmpCountEntry | not-accessible | current | Number of IPv4 routes with a given number of next hops. |
| 1.3.6.1.4.1.2356.16.1.2.18.1.1 | ColumnagentEcmpNextHopCount | not-accessible | current | The number of next hops in a route. From 0 to the maximum number of next hops in an ECMP route. The maximum varies by platform. |
| 1.3.6.1.4.1.2356.16.1.2.18.1.2 | ColumnagentEcmpRouteCount | read-only | current | The number of IPv4 routes with agentEcmpNextHopCount next hops. |
| 1.3.6.1.4.1.2356.16.1.2.19 | NodeagentOspfStubRouterGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.19.1 | ScalarospfStubRouterAdvertisement | read-only | current | Specifies how the router LSAs are advertised by the router. The value doNotAdvertise indicates the advertisement of a standard router LSA and is the default va… |
| 1.3.6.1.4.1.2356.16.1.2.19.2 | ScalaragentOspfStubRouterReason | read-only | current | This indicates the reason because of which the router is in Stub mode. This is valid only if the agentOspfStubRouterMode is 'active'. |
| 1.3.6.1.4.1.2356.16.1.2.19.3 | ScalaragentOspfStubRouterStartupTimeRemaining | read-only | current | The time remaining (in seconds) for the router to come out of the stub mode. This is valid only if the agentOspfStubRouterReason is 'startup'. |
| 1.3.6.1.4.1.2356.16.1.2.19.4 | ScalaragentOspfStubRouterDuration | read-only | current | Time elapsed (in seconds) since the router last entered the stub router mode. This is valid only if the agentOspfStubRouterMode is 'active' and agentOspfStubRo… |
| 1.3.6.1.4.1.2356.16.1.2.150 | NodeagentRoutesConfigGroup | |||
| 1.3.6.1.4.1.2356.16.1.2.150.1 | TableagentStaticRoutesTable | not-accessible | current | Contains a list of statically configured routes |
| 1.3.6.1.4.1.2356.16.1.2.150.1.1 | RowagentStaticRoutesTableEntry | not-accessible | current | |
| 1.3.6.1.4.1.2356.16.1.2.150.1.1.1 | ColumnagentStaticRoutesNetworkAddress | read-only | current | The IP route prefix for the destination network |
| 1.3.6.1.4.1.2356.16.1.2.150.1.1.2 | ColumnagentStaticRoutesNetMask | read-write | current | The IP subnet mask |
| 1.3.6.1.4.1.2356.16.1.2.150.1.1.3 | ColumnagentStaticRoutesNextHop | read-write | current | Next Hop IP Address |
| 1.3.6.1.4.1.2356.16.1.2.150.1.1.4 | ColumnagentStaticRoutesType | read-only | current | The type of the route to configure |
| 1.3.6.1.4.1.2356.16.1.2.150.1.1.5 | ColumnagentStaticRoutesPreference | read-write | current | The preference of the route. A lower preference value indicates a more preferred route |
| 1.3.6.1.4.1.2356.16.1.2.150.1.1.6 | ColumnagentStaticRoutesStatus | read-create | current | The status of this route entry |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AutoCostRefBw | Unsigned32 (1..4294967) | current | The value of reference bandwidth from which ospf calculates metric cost. |
| SpfTimerRange | Integer32 (0..65535) | current | The range of intervals on which Spf timers can be configured. |