MPLS-LDP-ATM-STD-MIB
37 objects
Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3815. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB contains managed object definitions for configuring and monitoring the Multiprotocol Label Switching (MPLS), Label Distribution Protocol (LDP), utilizing Asynchronous Transfer Mode (ATM) as the Layer 2 media.
Imported Objects
| ATM-TC-MIB | AtmVpIdentifier |
| IF-MIB | InterfaceIndexOrZero |
| MPLS-LDP-STD-MIB | mplsLdpEntityIndex mplsLdpEntityLdpId mplsLdpPeerLdpId |
| MPLS-TC-STD-MIB | MplsAtmVcIdentifier mplsStdMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.166.5 | IdentitymplsLdpAtmStdMIB | Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3815. For full legal notices see the RFC itself or see: … | ||
| 1.3.6.1.2.1.10.166.5.1 | NodemplsLdpAtmObjects | |||
| 1.3.6.1.2.1.10.166.5.1.1 | NodemplsLdpEntityAtmObjects | |||
| 1.3.6.1.2.1.10.166.5.1.1.1 | TablemplsLdpEntityAtmTable | not-accessible | current | This table contains ATM specific information which could be used in the 'Optional Parameters' and other ATM specific information. This table 'sparse augments' … |
| 1.3.6.1.2.1.10.166.5.1.1.1.1 | RowmplsLdpEntityAtmEntry | not-accessible | current | An entry in this table represents the ATM parameters and ATM information for this LDP entity. |
| 1.3.6.1.2.1.10.166.5.1.1.1.1.1 | ColumnmplsLdpEntityAtmIfIndexOrZero | read-create | current | This value represents either the InterfaceIndex or 0 (zero). The value of zero means that the InterfaceIndex is not known. However, if the InterfaceIndex is kn… |
| 1.3.6.1.2.1.10.166.5.1.1.1.1.2 | ColumnmplsLdpEntityAtmMergeCap | read-create | current | Denotes the Merge Capability of this Entity. This is the EXACT value for the ATM Session Parameter, field M (for ATM Merge Capabilities). The ATM Session Param… |
| 1.3.6.1.2.1.10.166.5.1.1.1.1.3 | ColumnmplsLdpEntityAtmLRComponents | read-only | current | Number of Label Range Components in the Initialization message. This also represents the number of entries in the mplsLdpEntityAtmLRTable which correspond to t… |
| 1.3.6.1.2.1.10.166.5.1.1.1.1.4 | ColumnmplsLdpEntityAtmVcDirectionality | read-create | current | If the value of this object is 'bidirectional(0)', a given VCI, within a given VPI, is used as a label for both directions independently. If the value of this … |
| 1.3.6.1.2.1.10.166.5.1.1.1.1.5 | ColumnmplsLdpEntityAtmLsrConnectivity | read-create | current | The peer LSR may be connected indirectly by means of an ATM VP so that the VPI values may be different on either endpoint so the label MUST be encoded entirely… |
| 1.3.6.1.2.1.10.166.5.1.1.1.1.6 | ColumnmplsLdpEntityAtmDefaultControlVpi | read-create | current | The default VPI value for the non-MPLS connection. The default value of this is 0 (zero) but other values may be configured. This object allows a different val… |
| 1.3.6.1.2.1.10.166.5.1.1.1.1.7 | ColumnmplsLdpEntityAtmDefaultControlVci | read-create | current | The Default VCI value for a non-MPLS connection. The default value of this is 32 but other values may be configured. This object allows a different value to be… |
| 1.3.6.1.2.1.10.166.5.1.1.1.1.8 | ColumnmplsLdpEntityAtmUnlabTrafVpi | read-create | current | VPI value of the VCC supporting unlabeled traffic. This non-MPLS connection is used to carry unlabeled (IP) packets. The default value is the same as the defau… |
| 1.3.6.1.2.1.10.166.5.1.1.1.1.9 | ColumnmplsLdpEntityAtmUnlabTrafVci | read-create | current | VCI value of the VCC supporting unlabeled traffic. This non-MPLS connection is used to carry unlabeled (IP) packets. The default value is the same as the defau… |
| 1.3.6.1.2.1.10.166.5.1.1.1.1.10 | ColumnmplsLdpEntityAtmStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.10.166.5.1.1.1.1.11 | ColumnmplsLdpEntityAtmRowStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Chan… |
| 1.3.6.1.2.1.10.166.5.1.1.2 | TablemplsLdpEntityAtmLRTable | not-accessible | current | The MPLS LDP Entity ATM Label Range (LR) Table. The purpose of this table is to provide a mechanism for configuring a contiguous range of vpi's with a contiguo… |
| 1.3.6.1.2.1.10.166.5.1.1.2.1 | RowmplsLdpEntityAtmLREntry | not-accessible | current | A row in the LDP Entity ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and… |
| 1.3.6.1.2.1.10.166.5.1.1.2.1.1 | ColumnmplsLdpEntityAtmLRMinVpi | not-accessible | current | The minimum VPI number configured for this range. The value of zero is a valid value for the VPI portion of the label. |
| 1.3.6.1.2.1.10.166.5.1.1.2.1.2 | ColumnmplsLdpEntityAtmLRMinVci | not-accessible | current | The minimum VCI number configured for this range. |
| 1.3.6.1.2.1.10.166.5.1.1.2.1.3 | ColumnmplsLdpEntityAtmLRMaxVpi | read-create | current | The maximum VPI number configured for this range. |
| 1.3.6.1.2.1.10.166.5.1.1.2.1.4 | ColumnmplsLdpEntityAtmLRMaxVci | read-create | current | The maximum VCI number configured for this range. |
| 1.3.6.1.2.1.10.166.5.1.1.2.1.5 | ColumnmplsLdpEntityAtmLRStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.2.1.10.166.5.1.1.2.1.6 | ColumnmplsLdpEntityAtmLRRowStatus | read-create | current | The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Chan… |
| 1.3.6.1.2.1.10.166.5.1.2 | NodemplsLdpAtmSessionObjects | |||
| 1.3.6.1.2.1.10.166.5.1.2.1 | TablemplsLdpAtmSessionTable | not-accessible | current | A table which relates sessions in the 'mplsLdpSessionTable' and their label range intersections. There could be one or more label range intersections between a… |
| 1.3.6.1.2.1.10.166.5.1.2.1.1 | RowmplsLdpAtmSessionEntry | not-accessible | current | An entry in this table represents information on a single label range intersection between an LDP Entity and LDP Peer. The information contained in a row is re… |
| 1.3.6.1.2.1.10.166.5.1.2.1.1.1 | ColumnmplsLdpSessionAtmLRLowerBoundVpi | not-accessible | current | The minimum VPI number for this range. |
| 1.3.6.1.2.1.10.166.5.1.2.1.1.2 | ColumnmplsLdpSessionAtmLRLowerBoundVci | not-accessible | current | The minimum VCI number for this range. |
| 1.3.6.1.2.1.10.166.5.1.2.1.1.3 | ColumnmplsLdpSessionAtmLRUpperBoundVpi | read-only | current | The maximum VPI number for this range. |
| 1.3.6.1.2.1.10.166.5.1.2.1.1.4 | ColumnmplsLdpSessionAtmLRUpperBoundVci | read-only | current | The maximum VCI number for this range. |
| 1.3.6.1.2.1.10.166.5.2 | NodemplsLdpAtmConformance | |||
| 1.3.6.1.2.1.10.166.5.2.1 | NodemplsLdpAtmGroups | |||
| 1.3.6.1.2.1.10.166.5.2.1.1 | GroupmplsLdpAtmGroup | current | Objects that apply to all MPLS LDP implementations using ATM as the Layer 2. | |
| 1.3.6.1.2.1.10.166.5.2.2 | NodemplsLdpAtmCompliances | |||
| 1.3.6.1.2.1.10.166.5.2.2.1 | CompliancemplsLdpAtmModuleFullCompliance | current | The Module is implemented with support for read-create and read-write. In other words, both monitoring and configuration are available when using this MODULE-C… | |
| 1.3.6.1.2.1.10.166.5.2.2.2 | CompliancemplsLdpAtmModuleReadOnlyCompliance | read-only | current | The Module is implemented with support for read-only. In other words, only monitoring is available by implementing this MODULE-COMPLIANCE. |