MPOA-MIB
272 objects
This module defines a portion of the management information base (MIB) for managing Multiprotocol Over ATM clients and servers which was revised based on MPOA Errata contained in MPOA v1.1. The difference between af-mpoa-0092.000 and this version is the mpcMpsMacAddressTable has been obsoleted. The mpcMpsMultipleMacAddressTable has been added. The mpcMpsMultipleMacAddressTable replaces the mpcMpsMacAddressTable.
Imported Objects
| ATM-TC-MIB | -- AtmAddr -- |
| LAN-EMULATION-CLIENT-MIB | lecIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TimeInterval TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353 | NodeatmForum | |||
| 1.3.6.1.4.1.353.5 | NodeatmForumNetworkManagement | |||
| 1.3.6.1.4.1.353.5.8 | NodeatmfMpoa | |||
| 1.3.6.1.4.1.353.5.8.1 | IdentitympoaMIB | This module defines a portion of the management information base (MIB) for managing Multiprotocol Over ATM clients and servers which was revised based on MPOA … | ||
| 1.3.6.1.4.1.353.5.8.1.1 | NodempoaMIBObjects | |||
| 1.3.6.1.4.1.353.5.8.1.1.1 | NodempoaCommonObjects | |||
| 1.3.6.1.4.1.353.5.8.1.1.1.1 | TabledeviceTypeTable | not-accessible | current | The device type table represents the mapping of the Lane Data ATM address to the MAC device capability. The unique key is the Lane data ATM address and Lec Ind… |
| 1.3.6.1.4.1.353.5.8.1.1.1.1.1 | RowdeviceTypeEntry | not-accessible | current | An entry in this table and corresponding entries in the deviceTypeMpsMacAddressTable represent a mapping of a MAC device capability (i.e. the set of MAC addres… |
| 1.3.6.1.4.1.353.5.8.1.1.1.1.1.1 | ColumndeviceTypeIndex | not-accessible | current | Index into this table and also used as one of the indices for the deviceTypeMpsMacAddressTable. This index has local significance within the mpoaDeviceGroup. E… |
| 1.3.6.1.4.1.353.5.8.1.1.1.1.1.2 | ColumndeviceTypeLecIndex | read-only | current | LecIndex of LEC that supports this data ATM address |
| 1.3.6.1.4.1.353.5.8.1.1.1.1.1.3 | ColumndeviceTypeRemoteLecAtmAddress | read-only | current | The ATM address learned by LE ARP. |
| 1.3.6.1.4.1.353.5.8.1.1.1.1.1.4 | ColumndeviceTypeType | read-only | current | same as the TLV |
| 1.3.6.1.4.1.353.5.8.1.1.1.1.1.5 | ColumndeviceTypeMpsAtmAddress | read-only | current | Associated MPS address, zeros for non-MPOA and mpc |
| 1.3.6.1.4.1.353.5.8.1.1.1.1.1.6 | ColumndeviceTypeMpcAtmAddress | read-only | current | Associated MPC address, zeros for non-MPOA & mps |
| 1.3.6.1.4.1.353.5.8.1.1.1.2 | TabledeviceTypeMpsMacAddressTable | not-accessible | current | This table contains MPS MAC Address information gathered from the MPOA DeviceTypeTLV. |
| 1.3.6.1.4.1.353.5.8.1.1.1.2.1 | RowdeviceTypeMpsMacAddressEntry | not-accessible | current | Each entry represents an MPS MAC Address. Each entry corresponds to a deviceTypeIndex value for which the deviceTypeType attribute is `mps' or `mpsAndMpc'. |
| 1.3.6.1.4.1.353.5.8.1.1.1.2.1.1 | ColumndeviceTypeMpsMacAddress | read-only | current | MPS MAC address contained in the Device Type TLV which is identified by the deviceTypeIndex in the deviceTypeTable. |
| 1.3.6.1.4.1.353.5.8.1.1.2 | NodempcObjects | |||
| 1.3.6.1.4.1.353.5.8.1.1.2.1 | ScalarmpcNextIndex | read-write | current | This object contains an appropriate value to be used for mpcIndex when creating entries in the mpcConfigTable. The value 0 indicates that no new rows can be cr… |
| 1.3.6.1.4.1.353.5.8.1.1.2.2 | TablempcConfigTable | not-accessible | current | The MPOA Client Configuration Table. This table contains configuration information for all MPOA Clients which this agent manages. |
| 1.3.6.1.4.1.353.5.8.1.1.2.2.1 | RowmpcConfigEntry | not-accessible | current | MPOA Client Configuration Entry. Each entry contains configuration information for one MPOA Client. The configuration information, including the mpcIndex, must… |
| 1.3.6.1.4.1.353.5.8.1.1.2.2.1.1 | ColumnmpcIndex | not-accessible | current | A value which uniquely identifies this conceptual row in the mpcConfigTable. The `mpcNextIndex' object needs to be used to determine the value of this object. … |
| 1.3.6.1.4.1.353.5.8.1.1.2.2.1.2 | ColumnmpcRowStatus | read-create | current | This object allows creation and deletion of MPOA Clients. Within each conceptual mpcConfigTable row, writable objects may be modified, regardless of the value … |
| 1.3.6.1.4.1.353.5.8.1.1.2.2.1.3 | ColumnmpcConfigMode | read-create | current | Indicates whether this MPC should auto-configure the next time it is (re-)initialized. During the (re-)initialization of this MPC, if the mode is automatic(1),… |
| 1.3.6.1.4.1.353.5.8.1.1.2.2.1.4 | ColumnmpcCtrlAtmAddr | read-create | current | The MPC's Control ATM Address. There exists one Control ATM Address per MPC, therefore, the value of this entry is unique within the table. The control ATM Add… |
| 1.3.6.1.4.1.353.5.8.1.1.2.2.1.5 | ColumnmpcSCSetupFrameCount | read-create | current | This represents the MPC-p1 Short-cut setup frame count parameter. The MPC-p1 value is frames measured over mpcSCFrameTime seconds. Flow detection is protocol i… |
| 1.3.6.1.4.1.353.5.8.1.1.2.2.1.6 | ColumnmpcSCSetupFrameTime | read-create | current | MPC-p2 Short-cut setup frame time, in seconds. |
| 1.3.6.1.4.1.353.5.8.1.1.2.2.1.7 | ColumnmpcInitialRetryTime | read-create | current | MPC-p4 is the initial value for the retry time out period used for timing out MPOA Resolution Requests in seconds. Retry time consists of this initial time-out… |
| 1.3.6.1.4.1.353.5.8.1.1.2.2.1.8 | ColumnmpcRetryTimeMaximum | read-create | current | MPC-p5 cumulative max value for Retry Time (MPC-p4). Retries are attempted at intervals determined by the algorithm described in the definition of mpcIntialRet… |
| 1.3.6.1.4.1.353.5.8.1.1.2.2.1.9 | ColumnmpcHoldDownTime | read-create | current | MPC-p6 Hold Down Time Minimum time to wait before reinitiating a failed resolution attempt. Default is mpcRetryTimeMaximum * 4. |
| 1.3.6.1.4.1.353.5.8.1.1.2.3 | TablempcActualTable | not-accessible | current | MPOA Client Actual Table. A read-only table which contains state information and reflects the actual values which these MPOA Clients are using. The actual valu… |
| 1.3.6.1.4.1.353.5.8.1.1.2.3.1 | RowmpcActualEntry | not-accessible | current | An entry in the MPC Actual Table. An entry represents a specific MPOA Client's state information and the actual values which are being used by the MPOA Client.… |
| 1.3.6.1.4.1.353.5.8.1.1.2.3.1.1 | ColumnmpcActualState | read-only | current | This object indicates the actual state of the MPOA Client. |
| 1.3.6.1.4.1.353.5.8.1.1.2.3.1.2 | ColumnmpcDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this MPC's counters experienced a discontinuity. The relevant counters are the s… |
| 1.3.6.1.4.1.353.5.8.1.1.2.3.1.3 | ColumnmpcActualConfigMode | read-only | current | Indicates whether this MPC auto-configured when it was last (re-)initialized. |
| 1.3.6.1.4.1.353.5.8.1.1.2.3.1.4 | ColumnmpcActualSCSetupFrameCount | read-only | current | MPC-p1 Short-cut setup frame count. In frames measured over mpcShortcutFrameTime seconds. Flow detection is protocol independent. i.e. all network layers mpcPr… |
| 1.3.6.1.4.1.353.5.8.1.1.2.3.1.5 | ColumnmpcActualSCSetupFrameTime | read-only | current | Actual MPC-p2 Short-cut setup frame time, in seconds. |
| 1.3.6.1.4.1.353.5.8.1.1.2.3.1.6 | ColumnmpcActualInitialRetryTime | read-only | current | Actual MPC-p4 is initial value for the retry time out. |
| 1.3.6.1.4.1.353.5.8.1.1.2.3.1.7 | ColumnmpcActualRetryTimeMaximum | read-only | current | MPC-p5 cumulative maximum value for Retry Time (MPC-p4). Retries are attempted at intervals determined by the algorithm described in the definition of mpcActua… |
| 1.3.6.1.4.1.353.5.8.1.1.2.3.1.8 | ColumnmpcActualHoldDownTime | read-only | current | MPC-p6 Hold Down Time Minimum time to wait before reinitiating a failed resolution attempt. The default value is mpcRetryTimeMaximum * 4. |
| 1.3.6.1.4.1.353.5.8.1.1.2.4 | TablempcDataAtmAddressTable | not-accessible | current | A table which shows all the data ATM addresses associated with all MPOA Clients. |
| 1.3.6.1.4.1.353.5.8.1.1.2.4.1 | RowmpcDataAtmAddressEntry | not-accessible | current | Each row defines one data ATM address associated with an MPC. NOTE: if an MPC has more than one data ATM address then there will be another entry which contain… |
| 1.3.6.1.4.1.353.5.8.1.1.2.4.1.1 | ColumnmpcDataAtmAddress | not-accessible | current | A data ATM Address which is associated with an MPOA Client specified by the mpcIndex. |
| 1.3.6.1.4.1.353.5.8.1.1.2.4.1.2 | ColumnmpcDataAtmAddressRowStatus | read-create | current | This object allows creation and deletion of an MPOA Client's Data ATM Addresses. The row can be created/deleted by either an NMS or by the SNMP agent. |
| 1.3.6.1.4.1.353.5.8.1.1.2.5 | TablempcStatisticsTable | not-accessible | current | A read-only table which contains statistical information for all MPOA Clients that this agent manages. |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1 | RowmpcStatisticsEntry | not-accessible | current | Each row in this table contains statistics for one MPOA Client. |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.1 | ColumnmpcStatTxMpoaResolveRequests | read-only | current | The number of MPOA Resolve Requests transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management syst… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.2 | ColumnmpcStatRxMpoaResolveReplyAcks | read-only | current | The number of positively acknowledged MPC Resolved Replies received by this MPC with an MPOA CIE Code of 0x00 (Success). Discontinuities in the value of this c… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.3 | ColumnmpcStatRxMpoaResolveReplyInsufECResources | read-only | current | The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x81, `Insufficient resources to accept egress cache entry'. Discontinuities in the val… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.4 | ColumnmpcStatRxMpoaResolveReplyInsufSCResources | read-only | current | The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x82, `Insufficient resources to accept the shortcut'. Discontinuities in the value of … |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.5 | ColumnmpcStatRxMpoaResolveReplyInsufEitherResources | read-only | current | The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x83, `Insufficient resources to accept either shortcut or egress cache entry'. Discont… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.6 | ColumnmpcStatRxMpoaResolveReplyUnsupportedInetProt | read-only | current | The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x84, `Unsupported Internework Layer protocol'. Discontinuities in the value of this co… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.7 | ColumnmpcStatRxMpoaResolveReplyUnsupportedMacEncaps | read-only | current | The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x85, `Unsupported MAC layer encapsulation'. Discontinuities in the value of this count… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.8 | ColumnmpcStatRxMpoaResolveReplyUnspecifiedOther | read-only | current | The number of MPOA Resolution Replies received with an MPOA CIE Code of 0x88, `Unspecified/Other'. Discontinuities in the value of this counter can occur at re… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.9 | ColumnmpcStatRxMpoaImpRequests | read-only | current | The number of MPOA Cache Imposition Requests received by this MPC. Discontinuities in the value of this counter can occur at re- initialization of the manageme… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.10 | ColumnmpcStatTxMpoaImpReplyAcks | read-only | current | The number of successful MPOA Cache Imposition replies transmitted by this MPC with an MPOA CIE Code of 0x00 `Success'. Discontinuities in the value of this co… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.11 | ColumnmpcStatTxMpoaImpReplyInsufECResources | read-only | current | The number of MPOA Cache Imposition Replies transmitted with an MPOA CIE Code of 0x81, `Insufficient resources to accept egress cache entry'. Discontinuities i… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.12 | ColumnmpcStatTxMpoaImpReplyInsufSCResources | read-only | current | The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x82, `Insufficient resources to accept shortcut'. Discontinuities in the value of t… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.13 | ColumnmpcStatTxMpoaImpReplyInsufEitherResources | read-only | current | The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x83, `Insufficient resources to accept either shortcut or egress cache entry'. Disc… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.14 | ColumnmpcStatTxMpoaImpReplyUnsupportedInetProt | read-only | current | The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x84, `Unsupported Internetwork Layer protocol'. Discontinuities in the value of thi… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.15 | ColumnmpcStatTxMpoaImpReplyUnsupportedMacEncaps | read-only | current | The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x85, `Unsupported MAC Layer encapsulation'. Discontinuities in the value of this co… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.16 | ColumnmpcStatTxMpoaImpReplyUnspecifiedOther | read-only | current | The number of MPOA Imposition Replies transmitted with an MPOA CIE Code of 0x88, `Unspecified/Other'. Discontinuities in the value of this counter can occur at… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.17 | ColumnmpcStatTxMpoaEgressCachePurgeRequests | read-only | current | The number of MPOA Egress Cache Purge Requests transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the mana… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.18 | ColumnmpcStatRxMpoaEgressCachePurgeReplies | read-only | current | The number of MPOA Egress Cache Purge Replies received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the manageme… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.19 | ColumnmpcStatRxMpoaKeepAlives | read-only | current | The number of MPOA Keep Alive messages received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management syst… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.20 | ColumnmpcStatRxMpoaTriggers | read-only | current | The number of MPOA Trigger messages received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system,… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.21 | ColumnmpcStatRxMpoaDataPlanePurges | read-only | current | The number of MPOA Data Plane Purge messages received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the managemen… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.22 | ColumnmpcStatTxMpoaDataPlanePurges | read-only | current | The number of MPOA Data Plane Purge messages transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the manage… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.23 | ColumnmpcStatRxNhrpPurgeRequests | read-only | current | The number of Purge Requests received by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.24 | ColumnmpcStatTxNhrpPurgeReplies | read-only | current | The number of Purge Replies transmitted by this MPC. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.25 | ColumnmpcStatRxErrUnrecognizedExtensions | read-only | current | The number of Error Indication packets received by this MPC with the error code `Unrecognized Extension'. Discontinuities in the value of this counter can occu… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.26 | ColumnmpcStatRxErrLoopDetecteds | read-only | current | The number of Error Indication packets received by this MPC with the error code `Loop Detected'. Discontinuities in the value of this counter can occur at re-i… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.27 | ColumnmpcStatRxErrProtoAddrUnreachables | read-only | current | The number of Error Indication packets received by this MPC with the error code `Protocol Address Unreachable'. Discontinuities in the value of this counter ca… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.28 | ColumnmpcStatRxErrProtoErrors | read-only | current | The number of Error Indication packets received by this MPC with the error code `Protocol Errors'. Discontinuities in the value of this counter can occur at re… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.29 | ColumnmpcStatRxErrSduSizeExceededs | read-only | current | The number of Error Indication packets received by this MPC with the error code `SDU Size Exceeded'. Discontinuities in the value of this counter can occur at … |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.30 | ColumnmpcStatRxErrInvalidExtensions | read-only | current | The number of Error Indication packets received by this MPC with the error code `Invalid Extensions'. Discontinuities in the value of this counter can occur at… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.31 | ColumnmpcStatRxErrInvalidReplies | read-only | current | The number of Error Indication packets received by this MPC with the error code `Invalid Reply'. Discontinuities in the value of this counter can occur at re-i… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.32 | ColumnmpcStatRxErrAuthenticationFailures | read-only | current | The number of Error Indication packets received by this MPC with the error code `Authentication Failure'. Discontinuities in the value of this counter can occu… |
| 1.3.6.1.4.1.353.5.8.1.1.2.5.1.33 | ColumnmpcStatRxErrHopCountExceededs | read-only | current | The number of Error Indication packets received by this MPC with the error code `Hop Count Exceeded'. Discontinuities in the value of this counter can occur at… |
| 1.3.6.1.4.1.353.5.8.1.1.2.6 | TablempcProtocolTable | not-accessible | current | List of protocols, per MPC, for which flow detection is enabled |
| 1.3.6.1.4.1.353.5.8.1.1.2.6.1 | RowmpcProtocolEntry | not-accessible | current | Each row indicates one protocol for which an MPC will do flow detection. If the LECS was contacted for configuration information, and the Control Octet of the … |
| 1.3.6.1.4.1.353.5.8.1.1.2.6.1.1 | ColumnmpcFlowDetectProtocol | not-accessible | current | The protocol on which flow detection is performed. If this value was obtained from the LECS then this value is one of the collection of values returned in the … |
| 1.3.6.1.4.1.353.5.8.1.1.2.6.1.2 | ColumnmpcLECSValue | read-only | current | This object reflects if the current entry is due to a retrieval from the LECS or not. If this entry is due to the LECS, then true(1) is the value for this obje… |
| 1.3.6.1.4.1.353.5.8.1.1.2.6.1.3 | ColumnmpcProtocolRowStatus | read-create | current | This object is used by an agent or manager to create, delete or modify a row in this table. |
| 1.3.6.1.4.1.353.5.8.1.1.2.7 | TablempcMappingTable | not-accessible | current | A table mapping the `lecIndex' values of LANE Clients to the `mpcIndex' values of corresponding MPOA Clients. |
| 1.3.6.1.4.1.353.5.8.1.1.2.7.1 | RowmpcMappingEntry | not-accessible | current | Each row defines one lecIndex The mpcIndex that a lecIndex maps to is not necessarily unique (an MPC can serve many LECs, however, a LEC cannot be served by mo… |
| 1.3.6.1.4.1.353.5.8.1.1.2.7.1.1 | ColumnmpcMappingRowStatus | read-create | current | This object is used by an agent or manager to create, delete or modify a row in this table. |
| 1.3.6.1.4.1.353.5.8.1.1.2.7.1.2 | ColumnmpcMappingIndex | read-create | current | The mpcIndex of the MPOA Client that is performing flow detection for the LANE Client represented by the lecIndex. |
| 1.3.6.1.4.1.353.5.8.1.1.2.8 | TablempcMpsTable | not-accessible | current | This is a read-only table which contains information about the MPSs that these MPCs know about. |
| 1.3.6.1.4.1.353.5.8.1.1.2.8.1 | RowmpcMpsEntry | not-accessible | current | A row created by an MPC. The MPC learns about an MPS and creates a row. |
| 1.3.6.1.4.1.353.5.8.1.1.2.8.1.1 | ColumnmpcMpsIndex | not-accessible | current | The MPS's index which is used to identify a row in this table. |
| 1.3.6.1.4.1.353.5.8.1.1.2.8.1.2 | ColumnmpcMpsAtmAddr | read-only | current | The Control ATM Address of the MPS |
| 1.3.6.1.4.1.353.5.8.1.1.2.9 | TablempcMpsMacAddressTable | not-accessible | obsolete | This is a read-only table which contains information about all the MPSs' MAC Addresses that these MPCs know about. |
| 1.3.6.1.4.1.353.5.8.1.1.2.9.1 | RowmpcMpsMacAddressEntry | not-accessible | obsolete | A row is created by an MPC. The MPC learns about an MPS's MAC Address and creates a row. |
| 1.3.6.1.4.1.353.5.8.1.1.2.9.1.1 | ColumnmpcLecIndex | not-accessible | obsolete | The lecIndex which represents the associated LEC. |
| 1.3.6.1.4.1.353.5.8.1.1.2.9.1.2 | ColumnmpcMpsMacAddress | read-only | obsolete | The MAC Address of the MPS. |
| 1.3.6.1.4.1.353.5.8.1.1.2.10 | ScalarmpcIngressCacheTxTotalPackets | read-only | current | The total number of packets transmitted over MPC Short Cuts. |
| 1.3.6.1.4.1.353.5.8.1.1.2.11 | ScalarmpcIngressCacheTxTotalOctets | read-only | current | The total number of octets transmitted over MPC Short Cuts. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12 | TablempcIngressCacheTable | not-accessible | current | This table contains information for MPC Caches for the ingress MPC. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1 | RowmpcIngressCacheEntry | not-accessible | current | An entry contains control information for a row in a MPC's Ingress Cache. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.1 | ColumnmpcIngressCacheDestInetworkAddrType | read-only | current | The type of the destination internetwork layer address. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.2 | ColumnmpcIngressCacheDestAddr | read-only | current | The destination internetwork layer address for which this entry is defined. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.3 | ColumnmpcIngressCachePrefixLen | read-only | current | Defines an equivalence class of addresses that match Prefix Length bit positions of the destination internetwork layer address. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.4 | ColumnmpcIngressCacheDestAtmAddr | read-only | current | The Destination ATM Address received in the MPOA Resolution Reply. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.5 | ColumnmpcIngressCacheSrcAtmAddr | read-only | current | The Source ATM Address for the MPOA Resolution Request. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.6 | ColumnmpcIngressCacheEntryState | read-only | current | The present state of this MPC ingress cache. The states are: doesNotExist (1) inactive (2) active. For an example, if using the Finite State Machine Appendix I… |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.7 | ColumnmpcIngressCacheEgressCacheTagValid | read-only | current | If the value of this object is true(1), then a valid Egress Cache Tag is present and the value of the Egress Cache Tag is in mpcIngressCacheEgressCacheTag. Oth… |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.8 | ColumnmpcIngressCacheEgressCacheTag | read-only | current | If a valid Egress Cache Tag is present, then this object contains the value of that tag. To determine if this object contains a valid value, mpcIngressCacheEgr… |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.9 | ColumnmpcIngressCacheLastNhrpCieCode | read-only | current | The last NHRP CIE code received for this entry. This value is valid only during the Hold Down period of the cache entry. This value is undefined otherwise. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.10 | ColumnmpcIngressCacheSigErrCode | read-only | current | Error code or Success of the last sinalling request for this cache entry. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.11 | ColumnmpcIngressCacheRetries | read-only | current | The current number of times this MPC has issued a resolution request since it received a valid reply. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.12 | ColumnmpcIngressCacheTimeUntilNextResolutionRequest | read-only | current | The amount of time the MPC must wait before issuing the next resolution request. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.13 | ColumnmpcIngressCacheHoldingTime | read-only | current | The time that this MPC's Ingress Cache Entry will remain valid. If the mpcIngressCacheEntryState is not active this value will be zero. |
| 1.3.6.1.4.1.353.5.8.1.1.2.12.1.14 | ColumnmpcIngressCacheServiceCategory | read-only | current | The service categories supported for this shortcut. |
| 1.3.6.1.4.1.353.5.8.1.1.2.13 | ScalarmpcEgressCacheRxTotalPackets | read-only | current | This counts the total number of packets received by MPC Short Cuts. |
| 1.3.6.1.4.1.353.5.8.1.1.2.14 | ScalarmpcEgressCacheRxTotalOctets | read-only | current | This counts the total number of octets received by MPC Short Cuts. |
| 1.3.6.1.4.1.353.5.8.1.1.2.15 | TablempcEgressCacheTable | not-accessible | current | This table contains Egress Cache information for all the MPCs which this agent manages. |
| 1.3.6.1.4.1.353.5.8.1.1.2.15.1 | RowmpcEgressCacheEntry | not-accessible | current | An entry in the MPOA Client's Egress Cache table. |
| 1.3.6.1.4.1.353.5.8.1.1.2.15.1.1 | ColumnmpcEgressCacheId | read-only | current | Cache ID Provided by the MPS in the Cache Imposition Request. |
| 1.3.6.1.4.1.353.5.8.1.1.2.15.1.2 | ColumnmpcEgressCacheInetworkAddrType | read-only | current | Type of Internetwork Address in this cache entry. |
| 1.3.6.1.4.1.353.5.8.1.1.2.15.1.3 | ColumnmpcEgressCacheIDestAddr | read-only | current | The destination internetwork layer address for which this entry is defined. |
| 1.3.6.1.4.1.353.5.8.1.1.2.15.1.4 | ColumnmpcEgressCachePrefixLen | read-only | current | Defines an equivalence class of addresses that match Prefix Length bit positions of the destination internetwork layer address. |
| 1.3.6.1.4.1.353.5.8.1.1.2.15.1.5 | ColumnmpcEgressCacheEntryState | read-only | current | The present state of this MPC egress cache entry. The states are: doesNotExist (1) inactive (2) active (3) For example,if using the Finite State Machine in App… |
| 1.3.6.1.4.1.353.5.8.1.1.2.15.1.6 | ColumnmpcEgressCacheEgressCacheTagValid | read-only | current | If the value of this object is true(1), then a valid Egress Cache Tag is present and the value of the Egress Cache Tag is in mpcEgressCacheEgressCacheTag. Othe… |
| 1.3.6.1.4.1.353.5.8.1.1.2.15.1.7 | ColumnmpcEgressCacheEgressCacheTag | read-only | current | If a valid Egress Cache Tag is present, then this object contains the value of that tag. To determine if this object contains a valid value, mpcEgressCacheEgre… |
| 1.3.6.1.4.1.353.5.8.1.1.2.15.1.8 | ColumnmpcEgressCacheHoldTime | read-only | current | The remaining time for which this entry is valid. |
| 1.3.6.1.4.1.353.5.8.1.1.2.15.1.9 | ColumnmpcEgressCacheDataLinkHeader | read-only | current | The DataLink header that the egress client rebuilds the original DataLink packet with. |
| 1.3.6.1.4.1.353.5.8.1.1.2.15.1.10 | ColumnmpcEgressCacheIngressMpcDataAtmAddr | read-only | current | The Data ATM Address of the ingress MPC that issued the MPOA Resolution request |
| 1.3.6.1.4.1.353.5.8.1.1.2.15.1.11 | ColumnmpcEgressCacheLecIndex | read-only | current | This is the lecIndex of the LANE Client that this flow is associated with. This can be used to get the ELAN name as well as other LANE parameters. |
| 1.3.6.1.4.1.353.5.8.1.1.2.15.1.12 | ColumnmpcEgressCacheServiceCategory | read-only | current | This is a bitmap describing the service categories supported for this shortcut. This value represents an inclusive OR of the bits: bit 1 - if rt-VBR is support… |
| 1.3.6.1.4.1.353.5.8.1.1.2.16 | NodempcMpsObjects | |||
| 1.3.6.1.4.1.353.5.8.1.1.2.16.1 | TablempcMpsMultipleMacAddressTable | not-accessible | current | This is a read-only table which contains information about all the MPSs' MAC Addresses that these MPCs use during flow detection. Note that due to the multinet… |
| 1.3.6.1.4.1.353.5.8.1.1.2.16.1.1 | RowmpcMpsMultipleMacAddressEntry | not-accessible | current | A row is created by an MPC. The MPC learns about a MPS and the one or more MAC Address of the MPS which the MPC uses during flow detection. Each row represents… |
| 1.3.6.1.4.1.353.5.8.1.1.2.16.1.1.1 | ColumnmpcFlowDetectLecIndex | not-accessible | current | The lecIndex which represents the associated LEC. |
| 1.3.6.1.4.1.353.5.8.1.1.2.16.1.1.2 | ColumnmpcMpsMacAddressIndex | not-accessible | current | This value is used to differentiate MAC Addresses from the same MPS used by the same MPC during flow detection. This value should be unique within the scope of… |
| 1.3.6.1.4.1.353.5.8.1.1.2.16.1.1.3 | ColumnmpcMpsFlowDetectMacAddress | read-only | current | An MPS MAC Address used by an MPC during flow detection. |
| 1.3.6.1.4.1.353.5.8.1.1.3 | NodempsObjects | |||
| 1.3.6.1.4.1.353.5.8.1.1.3.1 | ScalarmpsNextIndex | read-only | current | This object contains an appropriate value to be used for mpsIndex when creating entries in the mpsConfigTable. The value 0 indicates that no new rows can be cr… |
| 1.3.6.1.4.1.353.5.8.1.1.3.2 | TablempsConfigTable | not-accessible | current | The MPOA Server Configuration Table. This table represents the configuration information for all MPOA Servers which this agent manages. |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1 | RowmpsConfigEntry | not-accessible | current | MPOA Server Configuration Entry. Each entry contains configuration information for one MPOA Server. |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.1 | ColumnmpsIndex | not-accessible | current | A value which uniquely identifies this conceptual row in the mpsConfigTable. The `mpsNextIndex' object needs to be used to determine the value of this object. … |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.2 | ColumnmpsRowStatus | read-create | current | This object allows creation and deletion of MPOA Servers. Within each conceptual mpsConfigTable row, objects which are writable may be modified regardless of t… |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.3 | ColumnmpsConfigMode | read-create | current | Indicates whether this MPS should auto-configure the next time it is (re-)initialized. In automatic(1) mode the LECS is contacted and requests are made for the… |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.4 | ColumnmpsCtrlAtmAddr | read-create | current | The MPS's Control ATM Address. There exists one Control ATM Address per MPS, therefore, the value of this entry is unique within the table. |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.5 | ColumnmpsKeepAliveTime | read-create | current | MPS-p1 Keep-alive time is max interval between the MPS sending MPOA Keep-Alives in seconds. |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.6 | ColumnmpsKeepAliveLifeTime | read-create | current | MPS-p2 Keep-Alive Lifetime The length of time an MPC may consider a Keep-Alive valid in seconds. This value must be at least three times the mpsKeepAliveTime (… |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.7 | ColumnmpsInitialRetryTime | read-create | current | MPS-p4 is initial value in seconds for the MPOA retry mechanism. |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.8 | ColumnmpsRetryTimeMaximum | read-create | current | MPS-p5 cumulative max value in seconds for Retry Time (MPS-p4). |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.9 | ColumnmpsGiveupTime | read-create | current | MPS-p6 Give Up Time. Minimum time in seconds to wait before giving up on a pending resolution request. |
| 1.3.6.1.4.1.353.5.8.1.1.3.2.1.10 | ColumnmpsDefaultHoldingTime | read-create | current | MPS-p7 Default Holding Time in minutes. The default Holding Time used in NHRP Resolution Replies. An egress MPS may use local information to determine a more a… |
| 1.3.6.1.4.1.353.5.8.1.1.3.3 | TablempsActualTable | not-accessible | current | A read-only table containing identification, status, and operational information about the MPOA Servers this agent manages. |
| 1.3.6.1.4.1.353.5.8.1.1.3.3.1 | RowmpsActualEntry | not-accessible | current | An entry in the MPS Actual Table. An entry represents a specific MPOA Server's status and operation information. |
| 1.3.6.1.4.1.353.5.8.1.1.3.3.1.1 | ColumnmpsActualState | read-only | current | This object indicates the current operational status of the MPOA Server. |
| 1.3.6.1.4.1.353.5.8.1.1.3.3.1.2 | ColumnmpsDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this MPS's counters experienced a discontinuity. The relevant counters are the s… |
| 1.3.6.1.4.1.353.5.8.1.1.3.3.1.3 | ColumnmpsActualConfigMode | read-only | current | Indicates whether this MPS auto-configured when it was last (re-)initialized. |
| 1.3.6.1.4.1.353.5.8.1.1.3.3.1.5 | ColumnmpsActualKeepAlive | read-only | current | The maximum amount of time in seconds this MPS waits between sending MPOA Keep-Alives. |
| 1.3.6.1.4.1.353.5.8.1.1.3.3.1.6 | ColumnmpsActualKeepAliveLifeTime | read-only | current | The length of time in seconds this MPS considers a Keep-Alive valid. |
| 1.3.6.1.4.1.353.5.8.1.1.3.3.1.7 | ColumnmpsActualInitialRetryTime | read-only | current | The actual initial value in seconds for the MPOA retry mechanism. |
| 1.3.6.1.4.1.353.5.8.1.1.3.3.1.8 | ColumnmpsActualRetryTimeMaximum | read-only | current | The actual cumulative max value in seconds for Retry Time. |
| 1.3.6.1.4.1.353.5.8.1.1.3.3.1.9 | ColumnmpsActualGiveupTime | read-only | current | Minimum time in seconds that this MPS waits before giving up on a pending resolution request. |
| 1.3.6.1.4.1.353.5.8.1.1.3.3.1.10 | ColumnmpsActualDefaultHoldingTime | read-only | current | The actual Holding Time in minutes used in NHRP Resolution Replies. |
| 1.3.6.1.4.1.353.5.8.1.1.3.4 | TablempsStatisticsTable | not-accessible | current | This table represents the statistical information for the MPSs, which this agent manages. |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1 | RowmpsStatisticsEntry | not-accessible | current | Each row in this table contains statistics for one MPOA server. |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.1 | ColumnmpsStatRxMpoaResolveRequests | read-only | current | The number of MPOA Resolve Requests received by this MPS which are translated to NHRP resolve requests. Discontinuities in the value of this counter can occur … |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.2 | ColumnmpsStatTxMpoaResolveReplyAcks | read-only | current | The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE Code of 0x00, `Success'. Discontinuities in the value of this counter can… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.3 | ColumnmpsStatTxMpoaResolveReplyInsufECResources | read-only | current | The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE Code of 0x81, `Insufficient resources to accept egress cache entry'. Disc… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.4 | ColumnmpsStatTxMpoaResolveReplyInsufSCResources | read-only | current | The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE Code of 0x82, `Insufficient resources to accept shortcut'. Discontinuitie… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.5 | ColumnmpsStatTxMpoaResolveReplyInsufEitherResources | read-only | current | The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE CODE of 0x83, `Insufficient resources to accept either shortcut or egress… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.6 | ColumnmpsStatTxMpoaResolveReplyUnsupportedInetProt | read-only | current | The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE CODE of 0x84, `Unsupported Internetwork Layer protocol'. Discontinuities … |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.7 | ColumnmpsStatTxMpoaResolveReplyUnsupportedMacEncaps | read-only | current | The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE CODE of 0x85, `Unsupported MAC layer encapsulation'. Discontinuities in t… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.8 | ColumnmpsStatTxMpoaResolveReplyUnspecifiedOther | read-only | current | The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE CODE of 0x88, `Unspecified/Other'. Discontinuities in the value of this c… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.9 | ColumnmpsStatTxMpoaResolveReplyOther | read-only | current | The number of MPOA Resolve Replies transmitted by this MPS which are not counted above. NOTE: this would include NHRP errors. Discontinuities in the value of t… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.10 | ColumnmpsStatGiveupTimeExpireds | read-only | current | The number of times the MPS Give up Time (MPS-p6) has expired while waiting for a reply from a re-originated MPOA resolution request, i.e. a reply for a transl… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.11 | ColumnmpsStatTxMpoaImpRequests | read-only | current | The number of MPOA Cache Imposition Requests transmitted by this MPS. Discontinuities in the value of this counter can occur at re-initialization of the manage… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.12 | ColumnmpsStatRxMpoaImpReplyAcks | read-only | current | The number of successful MPOA Cache Imposition Replies received by this MPS which contain an MPOA CIE Code of 0x00, `Success'. Discontinuities in the value of … |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.13 | ColumnmpsStatRxMpoaImpReplyInsufECResources | read-only | current | The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x81, `Insufficient resources to accept egress cache entry'… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.14 | ColumnmpsStatRxMpoaImpReplyInsufSCResources | read-only | current | The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x82, `Insufficient resources to accept shortcut'. Disconti… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.15 | ColumnmpsStatRxMpoaImpReplyInsufEitherResources | read-only | current | The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x83, `Insufficient resources to accept either shortcut or … |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.16 | ColumnmpsStatRxMpoaImpReplyUnsupportedInetProt | read-only | current | The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x84, `Unsupported Internetwork Layer protocol'. Discontinu… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.17 | ColumnmpsStatRxMpoaImpReplyUnsupportedMacEncaps | read-only | current | The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x85, `Unsupported MAC layer encapsulation'. Discontinuitie… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.18 | ColumnmpsStatRxMpoaImpReplyUnspecifiedOther | read-only | current | The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x88, `Unspecified/Other'. Discontinuities in the value of … |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.19 | ColumnmpsStatRxMpoaImpReplyOther | read-only | current | The number of MPOA Cache Imposition Replies received by this MPS which are not counted previously. NOTE: this would include NHRP errors. Discontinuities in the… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.20 | ColumnmpsStatRxMpoaEgressCachePurgeRequests | read-only | current | The number of MPOA Egress Cache Purges Requests received by this MPS. Discontinuities in the value of this counter can occur at re-initialization of the manage… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.21 | ColumnmpsStatTxMpoaEgressCachePurgeReplies | read-only | current | The number of MPOA Egress Cache Purge Replies transmitted by this MPS. Discontinuities in the value of this counter can occur at re-initialization of the manag… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.22 | ColumnmpsStatTxMpoaTriggers | read-only | current | The number of MPOA Trigger messages transmitted by this MPS. Discontinuities in the value of this counter can occur at re-initialization of the management syst… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.23 | ColumnmpsStatTxNhrpResolveRequests | read-only | current | Total count of MPOA Resolution Requests received by the Ingress MPS which were translated to NHRP Resolution Requests and transmitted to the NHS. Discontinuiti… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.24 | ColumnmpsStatRxNhrpResolveReplies | read-only | current | Total count of NHRP Resolution Replies received by the Ingress. Discontinuities in the value of this counter can occur at re-initialization of the management s… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.25 | ColumnmpsStatRxNhrpResolveRequests | read-only | current | Total count of NHRP Resolution Requests received by the Egress MPS from the NHS. Discontinuities in the value of this counter can occur at re-initialization of… |
| 1.3.6.1.4.1.353.5.8.1.1.3.4.1.26 | ColumnmpsStatTxNhrpResolveReplies | read-only | current | Total count of NHRP Resolution Replies transmitted by the Egress MPS to the NHS. Discontinuities in the value of this counter can occur at re-initialization of… |
| 1.3.6.1.4.1.353.5.8.1.1.3.5 | TablempsProtocolTable | not-accessible | current | List of protocols, per MPS, for which MPOA resolution is enabled. |
| 1.3.6.1.4.1.353.5.8.1.1.3.5.1 | RowmpsProtocolEntry | not-accessible | current | Each row indicates one protocol for which an MPS will perform MPOA resolution. If the LECS was contacted for configuration information, and the MPS-p3's contro… |
| 1.3.6.1.4.1.353.5.8.1.1.3.5.1.1 | ColumnmpsInternetworkLayerProtocol | not-accessible | current | MPS-p3 A protocol on which to perform MPOA resolution. |
| 1.3.6.1.4.1.353.5.8.1.1.3.5.1.2 | ColumnmpsLECSValue | read-only | current | This object reflects if the current entry is due to a retrieval from the LECS or not. If this entry is due to the LECS, then true(1) is the value for this obje… |
| 1.3.6.1.4.1.353.5.8.1.1.3.5.1.3 | ColumnmpsProtocolRowStatus | read-create | current | This object allows network managers to enable resolution for the `mpsInternetworkLayerProtocol'. |
| 1.3.6.1.4.1.353.5.8.1.1.3.6 | TablempsMappingTable | not-accessible | current | A table mapping the `lecIndex' values of LANE Clients to the `mpsIndex' values of corresponding MPOA Servers. |
| 1.3.6.1.4.1.353.5.8.1.1.3.6.1 | RowmpsMappingEntry | not-accessible | current | Each row defines one lecIndex The mpsIndex that a lecIndex maps to is not necessarily unique. In other words, there can be multiple LECs associated with one MP… |
| 1.3.6.1.4.1.353.5.8.1.1.3.6.1.1 | ColumnmpsMappingRowStatus | read-create | current | Allows creation, enabling/disabling of this row. |
| 1.3.6.1.4.1.353.5.8.1.1.3.6.1.2 | ColumnmpsMappingIndex | read-create | current | The mpsMappingIndex of the MPOA Server that is associated with this LEC. The mpsMappingIndex corresponds to the mpsIndex. |
| 1.3.6.1.4.1.353.5.8.1.1.3.7 | TablempsIngressCacheTable | not-accessible | current | This table tracks all the Ingress Cache information of the MPSs which this agents manages. |
| 1.3.6.1.4.1.353.5.8.1.1.3.7.1 | RowmpsIngressCacheEntry | not-accessible | current | A entry contains parameters and state variables for a row in a MPS's Ingress Cache. |
| 1.3.6.1.4.1.353.5.8.1.1.3.7.1.1 | ColumnmpsIngressCacheDestInternetworkAddrType | read-only | current | The type of internetwork layer address of the Destination Address. |
| 1.3.6.1.4.1.353.5.8.1.1.3.7.1.2 | ColumnmpsIngressCacheDestAddr | read-only | current | The Ingress MPS Destination Internetwork Layer Address. |
| 1.3.6.1.4.1.353.5.8.1.1.3.7.1.3 | ColumnmpsIngressCachePrefixLen | read-only | current | The Prefix Length of the mpsIngressCacheDestAddr. |
| 1.3.6.1.4.1.353.5.8.1.1.3.7.1.4 | ColumnmpsIngressCacheEntryState | read-only | current | The state of this MPS Ingress cache. The states are: doesNotExist (1) inactive (2) For example,if using the Finite State Machine in Appendix I.3, the state res… |
| 1.3.6.1.4.1.353.5.8.1.1.3.7.1.5 | ColumnmpsIngressCacheSrcInternetworkAddrType | read-only | current | The type of internetwork layer address of the Source Address. |
| 1.3.6.1.4.1.353.5.8.1.1.3.7.1.6 | ColumnmpsIngressCacheSrcAddr | read-only | current | The Ingress MPS Source Internetwork Layer Address. |
| 1.3.6.1.4.1.353.5.8.1.1.3.7.1.7 | ColumnmpsIngressCacheSourceMpcCtrlAtmAddr | read-only | current | The ATM Address from the source of this MPOA request. In other words, the Ingress MPC's Control Atm Address. |
| 1.3.6.1.4.1.353.5.8.1.1.3.7.1.8 | ColumnmpsIngressCacheResolvedAtmAddr | read-only | current | The ATM Address which has been resolved by an Egress MPC. |
| 1.3.6.1.4.1.353.5.8.1.1.3.7.1.9 | ColumnmpsIngressCacheHoldTime | read-only | current | Time interval that this value is valid. |
| 1.3.6.1.4.1.353.5.8.1.1.3.7.1.10 | ColumnmpsIngressCacheMpoaRequestId | read-only | current | The request ID contained in the MPOA resolution request from the local Ingress MPC. |
| 1.3.6.1.4.1.353.5.8.1.1.3.7.1.11 | ColumnmpsIngressCacheNhrpRequestId | read-only | current | The request ID which this MPS generates to identify the NHRP resolution request. |
| 1.3.6.1.4.1.353.5.8.1.1.3.7.1.12 | ColumnmpsIngressCacheServiceCategory | read-only | current | The service categories supported for this shortcut. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8 | TablempsEgressCacheTable | not-accessible | current | This table contains information regarding the Egress MPOA Server Cache Table. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1 | RowmpsEgressCacheEntry | not-accessible | current | An entry represents an entry in the MPS's Egress cache Table which keeps track of the state of the impositions. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.1 | ColumnmpsEgressCacheId | read-only | current | The id which identifies this cache entry. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.2 | ColumnmpsEgressCacheDestInternetworkAddrType | read-only | current | The destination protocol address type. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.3 | ColumnmpsEgressCacheDestAddr | read-only | current | The destination protocol address. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.4 | ColumnmpsEgressCachePrefixLen | read-only | current | The destination prefix length. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.5 | ColumnmpsEgressCacheHoldTime | read-only | current | Time interval that this value is valid. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.6 | ColumnmpsEgressCacheEntryState | read-only | current | The present states of this MPS egress cache entry. The states are: doesNotExist (1) inactive (2) For example,if using the Finite State Machine in Appendix 1.4,… |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.7 | ColumnmpsEgressCacheDataLinkHeader | read-only | current | Data-Link Layer Header. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.8 | ColumnmpsEgressCacheElanId | read-only | current | The elan id that this Cache Imposition is sent on. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.9 | ColumnmpsEgressCacheSourceClientAtmAddr | read-only | current | The Ingress NHC's Atm Address used in the original cache imposition. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.10 | ColumnmpsEgressCacheNhrpRequestId | read-only | current | The request id from the original NHRP Resolution Request, may be only useful in the Resolving State. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.11 | ColumnmpsEgressCacheMpoaRequestId | read-only | current | The new request id which is generated for this imposition's request, may be only useful in the Resolving State. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.12 | ColumnmpsEgressCacheServiceCategory | read-only | current | The service categories supported for this shortcut. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.13 | ColumnmpsEgressCacheNextHopInternetworkAddrType | read-only | current | The NextHop protocol address type. |
| 1.3.6.1.4.1.353.5.8.1.1.3.8.1.14 | ColumnmpsEgressCacheNextHopAddr | read-only | current | The NextHop protocol address. |
| 1.3.6.1.4.1.353.5.8.1.1.3.9 | TablempsMpcTable | not-accessible | current | This read-only table contains information about the MPCs that these MPSs know about. |
| 1.3.6.1.4.1.353.5.8.1.1.3.9.1 | RowmpsMpcEntry | not-accessible | current | A row created by an MPS. The MPS learns about the MPC and creates a row. |
| 1.3.6.1.4.1.353.5.8.1.1.3.9.1.1 | ColumnmpsMpcIndex | not-accessible | current | The local index for the mpc represented by this entry |
| 1.3.6.1.4.1.353.5.8.1.1.3.9.1.2 | ColumnmpsMpcCtrlAtmAddr | read-only | current | MPC control ATM address |
| 1.3.6.1.4.1.353.5.8.1.2 | NodempoaMIBConformance | |||
| 1.3.6.1.4.1.353.5.8.1.2.1 | NodempoaMIBGroups | |||
| 1.3.6.1.4.1.353.5.8.1.2.1.1 | GroupmpoaDeviceTypeGroup | current | A collection of objects which exists when the MPOA device learns the MPOA device type and MPOA control addresses of neighboring MPOA devices using the LANEv2 D… | |
| 1.3.6.1.4.1.353.5.8.1.2.1.2 | GroupmpoaDeviceTypeMpsMacGroup | current | A collection of objects which is present when the MPOA device learns the MPOA device type and MPOA control addresses of neighboring MPOA devices using the LANE… | |
| 1.3.6.1.4.1.353.5.8.1.2.1.3 | GroupmpcConfigGroup | current | A collection of objects used for creating and configuring MPOA Clients. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.4 | GroupmpcActualGroup | current | A collection of objects describing the status and operational parameters of the managed MPC. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.5 | GroupmpcDataAtmAddressGroup | current | A collection of objects which describe the set of data ATM addresses for the MPCs. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.6 | GroupmpcStatisticsGroup | current | A collection of objects that provide statistics on the MPOA protocol parameters. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.7 | GroupmpcProtocolGroup | current | A collection of objects to specify which parameters this MPC is enabled for. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.8 | GroupmpcMappingGroup | current | A collection of objects to map from LEC to MPC | |
| 1.3.6.1.4.1.353.5.8.1.2.1.9 | GroupmpcMpsGroup | current | A collection of objects which aid the MPCs to track information for all the MPSs which are known by the MPCs. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.10 | GroupmpcMpsMacAddressGroup | obsolete | A collection of objects which aid the MPCs to track MAC Address information for all the MPSs which are known by the MPCs. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.11 | GroupmpcIngressCacheTotalPacketGroup | current | A collection of objects which count the total number of packets transmitted over MPC short cuts. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.12 | GroupmpcIngressCacheTotalOctetGroup | current | A collection of objects which count the total number of octets transmitted over MPC short cuts. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.13 | GroupmpcIngressCacheGroup | current | A collection of objects used to monitor the MPOA ingress cache. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.14 | GroupmpcEgressCacheTotalPacketGroup | current | A collection of objects which count the total number of packets received by MPC short cuts. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.15 | GroupmpcEgressCacheTotalOctetGroup | current | A collection of objects which count the total number of octets received by MPC short cuts. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.16 | GroupmpcEgressCacheGroup | current | A collection of objects used to monitor the MPOA egress cache. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.17 | GroupmpsConfigGroup | current | A collection of objects used for creating and configuring MPOA Servers. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.18 | GroupmpsActualGroup | current | A collection of objects describing the status and operational parameters of the managed MPS. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.19 | GroupmpsStatisticsGroup | current | A collection of objects that provide statistics on the MPOA Server protocol parameters. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.20 | GroupmpsProtocolGroup | current | A collection of objects to specify which parameters this MPS is enabled for. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.21 | GroupmpsMappingGroup | current | A collection of objects to map from MPSs to LECs. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.22 | GroupmpsMpcGroup | current | A collection of objects which aid the MPSs to track information for all the MPCs which are known by the MPSs. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.23 | GroupmpsIngressCacheGroup | current | A collection of objects to monitor the MPS ingress cache. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.24 | GroupmpsEgressCacheGroup | current | A collection of objects to monitor MPS's egress cache parameters. | |
| 1.3.6.1.4.1.353.5.8.1.2.1.25 | GroupmpcMpsMultipleMacAddressGroup | current | A collection of objects which aid the MPCs to track MAC Address information for all the MPSs which are used during flow detection by the MPCs. | |
| 1.3.6.1.4.1.353.5.8.1.2.2 | NodempoaMIBCompliances | |||
| 1.3.6.1.4.1.353.5.8.1.2.2.1 | CompliancempoaMpcMibBasicCompliance | read-only | current | The basic implementation requirements for SNMP entities which support MPOA Clients. |
| 1.3.6.1.4.1.353.5.8.1.2.2.2 | CompliancempoaMpcMibAdvancedCompliance | read-only | current | The advanced implementation requirements for SNMP entities which support MPOA Clients. |
| 1.3.6.1.4.1.353.5.8.1.2.2.3 | CompliancempoaMpcMibAdvancedPlusOctetsCompliance | read-only | current | The AdvancedPlusOctets implementation requirements for SNMP entities which support MPOA Clients. This includes supporting the 64 bit octet counters. |
| 1.3.6.1.4.1.353.5.8.1.2.2.4 | CompliancempoaMpsMibBasicCompliance | read-only | current | The implementation requirements for SNMP entities which support MPOA Servers. |
| 1.3.6.1.4.1.353.5.8.1.2.2.5 | CompliancempoaMpsMibAdvancedCompliance | read-only | current | The advanced implementation requirements for SNMP entities which support MPOA Servers. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmAddr | OCTET STRING (SIZE(0|8|20)) | current | The ATM address used by the network entity. The address types are: no address (0 octets), E.164 (8 octets), and NSAP (20 octets). Note: The E.164 address is encoded in BCD format. |
| AtmConfigAddr | OCTET STRING (SIZE(1|8|20)) | current | The ATM address used by the network entity. The address types are: NSAP SEL Byte (1 octet) E.164 (8 octets), and NSAP (20 octets). Note: If the 1 octet NSAP SEL is given, the other 19 octets of the NSAP are derived from… |
| InternetworkAddr | OCTET STRING (SIZE (0..60)) | current | The value of an internetwork layer address. |
| InternetworkAddrType | INTEGER { other(0), ipV4(1), ipV6(2), nsap(3), hdlc(4), bbn1822(5), ieee802(6), e163(7), e164(8), f69(9), x121(10), ipx(11), appleTalk(12), decnetIV(13), banyanVines(14), e164WithNsap(15) } | current | Internetwork Layer Address Types. Values are defined in Assigned Numbers, RFC1700. Note: not all of these values make sense in all contexts where this type is used in this MIB, but they are included for completeness. |
| LecIndex | INTEGER (1..2147483647) | current | The value of this object identifies the LEC for which the entry contains management information. The value of this object for a particular LAN Emulation Client (LEC) has the same value as the lecIndex object, defined in… |
| MpcIndex | Integer32 (1..2147483647) | current | A unique value, for each MPOA client which this SNMP agent manages. It is recommended that values are assigned contiguously starting from 1. The value for each MPOA Client must remain constant, even if the MPOA Client o… |
| MpsIndex | Integer32 (1..2147483647) | current | A unique value, for each MPOA Server which this SNMP agent manages. It is recommended that values are assigned contiguously starting from 1. The value for each MPOA Server must remain constant, even if the MPOA Server o… |