MWRM-PM-MIB
535 objects
No module-level DESCRIPTION found.
Imported Objects
| IPV6-TC | -- Ipv6Address |
| MWRM-RADIO-MIB | genEquipRadioCfgRadioId |
| MWRM-UNIT-MIB | AllowedNotAllowed BerLevel ClockSrc DownUp EnableDisable EnableDisableSMI2 GreenYellow HalfFull InputSeverity Integrity LoopbackType MetricImperial NoYes OffOn PmTableType ProgressStatus QueueName RadioId RateMbps RfuId Severity SignalLevel SlotId SwCommand SwCommandTimer TrailIfType TrailProtectedType |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | -- Counter Gauge |
| RFC1213-MIB | DisplayString ifIndex |
| SNMPv2-SMI | Counter32 enterprises Gauge32 IpAddress OBJECT-TYPE |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2281 | Nodemicrowave-radio | |||
| 1.3.6.1.4.1.2281.10 | NodegenEquip | |||
| 1.3.6.1.4.1.2281.10.1 | NodegenEquipUnit | |||
| 1.3.6.1.4.1.2281.10.6 | NodegenEquipPM | |||
| 1.3.6.1.4.1.2281.10.6.1 | NodegenEquipPmRfu | |||
| 1.3.6.1.4.1.2281.10.6.1.1 | NodegenEquipPmRfuCommon | |||
| 1.3.6.1.4.1.2281.10.6.1.1.1 | TablegenEquipPmRfuCommonSL15minTable | not-accessible | mandatory | This table indicates the RFU Signal Level PM data. |
| 1.3.6.1.4.1.2281.10.6.1.1.1.1 | RowgenEquipPmRfuCommonSL15minEntry | not-accessible | mandatory | Entry containing the data of the RFU SL PM. |
| 1.3.6.1.4.1.2281.10.6.1.1.1.1.1 | ColumngenEquipPmRfuCommonSL15minId | read-only | mandatory | This value indicates an index of a specific RFU |
| 1.3.6.1.4.1.2281.10.6.1.1.1.1.2 | ColumngenEquipPmRfuCommonSL15minIfIndex | read-only | mandatory | This value indicates the interface index of a specific RFU (as appears in the ifTable) |
| 1.3.6.1.4.1.2281.10.6.1.1.1.1.3 | ColumngenEquipPmRfuCommonSL15minTimeAndDate | read-only | mandatory | This value indicates the Time and date for the specific PM. |
| 1.3.6.1.4.1.2281.10.6.1.1.1.1.4 | ColumngenEquipPmRfuCommonSL15minMinRsl | read-only | mandatory | This value indicates the minimum RSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.1.1.5 | ColumngenEquipPmRfuCommonSL15minMaxRsl | read-only | mandatory | This value indicates the maximum RSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.1.1.6 | ColumngenEquipPmRfuCommonSL15minRslExceed1 | read-only | mandatory | This value indicates the number of seconds RSL exceeded threshold number 1. |
| 1.3.6.1.4.1.2281.10.6.1.1.1.1.7 | ColumngenEquipPmRfuCommonSL15minRslExceed2 | read-only | mandatory | This value indicates the number of seconds RSL exceeded threshold number 2. |
| 1.3.6.1.4.1.2281.10.6.1.1.1.1.8 | ColumngenEquipPmRfuCommonSL15minMinTsl | read-only | mandatory | This value indicates the Min TSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.1.1.9 | ColumngenEquipPmRfuCommonSL15minMaxTsl | read-only | mandatory | This value indicates the Max TSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.1.1.10 | ColumngenEquipPmRfuCommonSL15minTslExceed | read-only | mandatory | This value indicates the number of seconds TSL exceeded the threshold |
| 1.3.6.1.4.1.2281.10.6.1.1.1.1.11 | ColumngenEquipPmRfuCommonSL15minIDF | read-only | mandatory | This value indicates the IDF (Invalid Data Flag) of the interval. integrity(0), nointegrity(1). |
| 1.3.6.1.4.1.2281.10.6.1.1.2 | TablegenEquipPmRfuCommonSL15minCurrTable | not-accessible | mandatory | This table indicates the RFU Signal Level PM data for the current 15 min. interval. |
| 1.3.6.1.4.1.2281.10.6.1.1.2.1 | RowgenEquipPmRfuCommonSL15minCurrEntry | not-accessible | mandatory | Entry containing the data of the Rfu SL PM. |
| 1.3.6.1.4.1.2281.10.6.1.1.2.1.1 | ColumngenEquipPmRfuCommonSL15minCurrId | read-only | mandatory | This value indicates an index of a specific RFU |
| 1.3.6.1.4.1.2281.10.6.1.1.2.1.2 | ColumngenEquipPmRfuCommonSL15minCurrIfIndex | read-only | mandatory | This value indicates the interface index of a specific RFU (as appears in the ifTable) |
| 1.3.6.1.4.1.2281.10.6.1.1.2.1.3 | ColumngenEquipPmRfuCommonSL15minCurrTimeAndDate | read-only | mandatory | This value indicates the Time and date for the specific PM. |
| 1.3.6.1.4.1.2281.10.6.1.1.2.1.4 | ColumngenEquipPmRfuCommonSL15minCurrMinRsl | read-only | mandatory | This value indicates the minimum RSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.2.1.5 | ColumngenEquipPmRfuCommonSL15minCurrMaxRsl | read-only | mandatory | This value indicates the maximum RSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.2.1.6 | ColumngenEquipPmRfuCommonSL15minCurrRslExceed1 | read-only | mandatory | This value indicates the number of seconds RSL exceeded threshold number 1. |
| 1.3.6.1.4.1.2281.10.6.1.1.2.1.7 | ColumngenEquipPmRfuCommonSL15minCurrRslExceed2 | read-only | mandatory | This value indicates the number of seconds RSL exceeded threshold number 2. |
| 1.3.6.1.4.1.2281.10.6.1.1.2.1.8 | ColumngenEquipPmRfuCommonSL15minCurrMinTsl | read-only | mandatory | This value indicates the Min TSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.2.1.9 | ColumngenEquipPmRfuCommonSL15minCurrMaxTsl | read-only | mandatory | This value indicates the Max TSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.2.1.10 | ColumngenEquipPmRfuCommonSL15minCurrTslExceed | read-only | mandatory | This value indicates the number of seconds TSL exceeded the threshold |
| 1.3.6.1.4.1.2281.10.6.1.1.2.1.11 | ColumngenEquipPmRfuCommonSL15minCurrIDF | read-only | mandatory | This value indicates the IDF (Invalid Data Flag) of the current interval. integrity(0), nointegrity(1). |
| 1.3.6.1.4.1.2281.10.6.1.1.3 | TablegenEquipPmRfuCommonSL24hrTable | not-accessible | mandatory | This table indicates the RFU Signal Level 24 hr PM data. |
| 1.3.6.1.4.1.2281.10.6.1.1.3.1 | RowgenEquipPmRfuCommonSL24hrEntry | not-accessible | mandatory | Entry containing the data of the RFU SL PM. |
| 1.3.6.1.4.1.2281.10.6.1.1.3.1.1 | ColumngenEquipPmRfuCommonSL24hrId | read-only | mandatory | This value indicates an index of a specific RFU |
| 1.3.6.1.4.1.2281.10.6.1.1.3.1.2 | ColumngenEquipPmRfuCommonSL24hrIfIndex | read-only | mandatory | This value indicates the interface index of a specific RFU (as appears in the ifTable) |
| 1.3.6.1.4.1.2281.10.6.1.1.3.1.3 | ColumngenEquipPmRfuCommonSL24hrTimeAndDate | read-only | mandatory | This value indicates the time and date for the specific PM. |
| 1.3.6.1.4.1.2281.10.6.1.1.3.1.4 | ColumngenEquipPmRfuCommonSL24hrMinRsl | read-only | mandatory | This value indicates the min RSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.3.1.5 | ColumngenEquipPmRfuCommonSL24hrMaxRsl | read-only | mandatory | This value indicates the max RSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.3.1.6 | ColumngenEquipPmRfuCommonSL24hrRslExceed1 | read-only | mandatory | This value indicates the number of seconds RSL exceeded threshold number 1. |
| 1.3.6.1.4.1.2281.10.6.1.1.3.1.7 | ColumngenEquipPmRfuCommonSL24hrRslExceed2 | read-only | mandatory | This value indicates the number of seconds RSL exceeded threshold number 2. |
| 1.3.6.1.4.1.2281.10.6.1.1.3.1.8 | ColumngenEquipPmRfuCommonSL24hrMinTsl | read-only | mandatory | This value indicates the Min TSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.3.1.9 | ColumngenEquipPmRfuCommonSL24hrMaxTsl | read-only | mandatory | This value indicates the Max TSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.3.1.10 | ColumngenEquipPmRfuCommonSL24hrTslExceed | read-only | mandatory | This value indicates the number of seconds RSL exceeded the threshold |
| 1.3.6.1.4.1.2281.10.6.1.1.3.1.11 | ColumngenEquipPmRfuCommonSL24hrIDF | read-only | mandatory | This value indicates the IDF (Invalid Data Flag) of the interval. integrity(0), nointegrity(1). |
| 1.3.6.1.4.1.2281.10.6.1.1.4 | TablegenEquipPmRfuCommonSL24hrCurrTable | not-accessible | mandatory | This table indicates the RFU Signal Level PM data for the current 24 hour interval. |
| 1.3.6.1.4.1.2281.10.6.1.1.4.1 | RowgenEquipPmRfuCommonSL24hrCurrEntry | not-accessible | mandatory | Entry containing the data of the RFU SL PM. |
| 1.3.6.1.4.1.2281.10.6.1.1.4.1.1 | ColumngenEquipPmRfuCommonSL24hrCurrId | read-only | mandatory | This value indicates an index of a specific RFU |
| 1.3.6.1.4.1.2281.10.6.1.1.4.1.2 | ColumngenEquipPmRfuCommonSL24hrCurrIfIndex | read-only | mandatory | This value indicates the interface index of a specific RFU (as appears in the ifTable) |
| 1.3.6.1.4.1.2281.10.6.1.1.4.1.3 | ColumngenEquipPmRfuCommonSL24hrCurrTimeAndDate | read-only | mandatory | This value indicates the time and date for the specific PM. |
| 1.3.6.1.4.1.2281.10.6.1.1.4.1.4 | ColumngenEquipPmRfuCommonSL24hrCurrMinRsl | read-only | mandatory | This value indicates the min RSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.4.1.5 | ColumngenEquipPmRfuCommonSL24hrCurrMaxRsl | read-only | mandatory | This value indicates the Max RSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.4.1.6 | ColumngenEquipPmRfuCommonSL24hrCurrRslExceed1 | read-only | mandatory | This value indicates the number of seconds RSL exceeded threshold number 1. |
| 1.3.6.1.4.1.2281.10.6.1.1.4.1.7 | ColumngenEquipPmRfuCommonSL24hrCurrRslExceed2 | read-only | mandatory | This value indicates the number of seconds RSL exceeded threshold number 2. |
| 1.3.6.1.4.1.2281.10.6.1.1.4.1.8 | ColumngenEquipPmRfuCommonSL24hrCurrMinTsl | read-only | mandatory | This value indicates the Min TSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.4.1.9 | ColumngenEquipPmRfuCommonSL24hrCurrMaxTsl | read-only | mandatory | This value indicates the Max TSL value. |
| 1.3.6.1.4.1.2281.10.6.1.1.4.1.10 | ColumngenEquipPmRfuCommonSL24hrCurrTslExceed | read-only | mandatory | This value indicates the number of seconds TSL exceeded the threshold |
| 1.3.6.1.4.1.2281.10.6.1.1.4.1.11 | ColumngenEquipPmRfuCommonSL24hrCurrIDF | read-only | mandatory | This value indicates the IDF (Invalid Data Flag) of the interval. integrity(0), nointegrity(1). |
| 1.3.6.1.4.1.2281.10.6.2 | NodegenEquipPmTraffic | |||
| 1.3.6.1.4.1.2281.10.6.2.1 | TablegenEquipPmTrafficRadioAgg15minTable | not-accessible | mandatory | This table indicates the Radio Aggregate PM data for all 15 min intervals. |
| 1.3.6.1.4.1.2281.10.6.2.1.1 | RowgenEquipPmTrafficRadioAgg15minEntry | not-accessible | mandatory | This table indicates the Radio Aggregate PM data for all 15 min intervals. |
| 1.3.6.1.4.1.2281.10.6.2.1.1.1 | ColumngenEquipPmTrafficRadioAgg15minId | read-only | mandatory | This value indicates an index of a specific RFU |
| 1.3.6.1.4.1.2281.10.6.2.1.1.2 | ColumngenEquipPmTrafficRadioAgg15minIfIndex | read-only | mandatory | This value indicates the interface index of a specific RFU (as appears in the ifTable) |
| 1.3.6.1.4.1.2281.10.6.2.1.1.3 | ColumngenEquipPmTrafficRadioAgg15minTimeAndDate | read-only | mandatory | This value indicates the time and date for the specific PM. |
| 1.3.6.1.4.1.2281.10.6.2.1.1.4 | ColumngenEquipPmTrafficRadioAgg15minES | read-only | mandatory | This value indicates the ES value. |
| 1.3.6.1.4.1.2281.10.6.2.1.1.5 | ColumngenEquipPmTrafficRadioAgg15minSES | read-only | mandatory | This value indicates the SES value. |
| 1.3.6.1.4.1.2281.10.6.2.1.1.6 | ColumngenEquipPmTrafficRadioAgg15minUAS | read-only | mandatory | This value indicates the UAS value. |
| 1.3.6.1.4.1.2281.10.6.2.1.1.7 | ColumngenEquipPmTrafficRadioAgg15minBBE | read-only | mandatory | This value indicates the BBE value. |
| 1.3.6.1.4.1.2281.10.6.2.1.1.8 | ColumngenEquipPmTrafficRadioAgg15minIDF | read-only | mandatory | This value indicates the IDF (Invalid Data Flag) of the interval. integrity(0), nointegrity(1). |
| 1.3.6.1.4.1.2281.10.6.2.2 | TablegenEquipPmTrafficRadioAgg15minCurrTable | not-accessible | mandatory | This table indicates the Radio Aggregate PM data for all 15 min intervals. |
| 1.3.6.1.4.1.2281.10.6.2.2.1 | RowgenEquipPmTrafficRadioAgg15minCurrEntry | not-accessible | mandatory | This table indicates the Radio Aggregate PM data for all 15 min intervals. |
| 1.3.6.1.4.1.2281.10.6.2.2.1.1 | ColumngenEquipPmTrafficRadioAgg15minCurrId | read-only | mandatory | This value indicates an index of a specific RFU |
| 1.3.6.1.4.1.2281.10.6.2.2.1.2 | ColumngenEquipPmTrafficRadioAgg15minCurrIfIndex | read-only | mandatory | This value indicates the interface index of a specific RFU (as appears in the ifTable) |
| 1.3.6.1.4.1.2281.10.6.2.2.1.3 | ColumngenEquipPmTrafficRadioAgg15minCurrTimeAndDate | read-only | mandatory | This value indicates the time and date for the specific PM. |
| 1.3.6.1.4.1.2281.10.6.2.2.1.4 | ColumngenEquipPmTrafficRadioAgg15minCurrES | read-only | mandatory | This value indicates the ES value. |
| 1.3.6.1.4.1.2281.10.6.2.2.1.5 | ColumngenEquipPmTrafficRadioAgg15minCurrSES | read-only | mandatory | This value indicates the SES value. |
| 1.3.6.1.4.1.2281.10.6.2.2.1.6 | ColumngenEquipPmTrafficRadioAgg15minCurrUAS | read-only | mandatory | This value indicates the UAS value. |
| 1.3.6.1.4.1.2281.10.6.2.2.1.7 | ColumngenEquipPmTrafficRadioAgg15minCurrBBE | read-only | mandatory | This value indicates the BBE value. |
| 1.3.6.1.4.1.2281.10.6.2.2.1.8 | ColumngenEquipPmTrafficRadioAgg15minCurrIDF | read-only | mandatory | This value indicates the IDF (Invalid Data Flag) of the interval. integrity(0), nointegrity(1). |
| 1.3.6.1.4.1.2281.10.6.2.3 | TablegenEquipPmTrafficRadioAgg24hrTable | not-accessible | mandatory | This table indicates the Radio Aggregate PM data for all 15 min intervals. |
| 1.3.6.1.4.1.2281.10.6.2.3.1 | RowgenEquipPmTrafficRadioAgg24hrEntry | not-accessible | mandatory | This table indicates the Radio Aggregate PM data for all 15 min intervals. |
| 1.3.6.1.4.1.2281.10.6.2.3.1.1 | ColumngenEquipPmTrafficRadioAgg24hrId | read-only | mandatory | This value indicates an index of a specific RFU |
| 1.3.6.1.4.1.2281.10.6.2.3.1.2 | ColumngenEquipPmTrafficRadioAgg24hrIfIndex | read-only | mandatory | This value indicates the interface index of a specific RFU (as appears in the ifTable) |
| 1.3.6.1.4.1.2281.10.6.2.3.1.3 | ColumngenEquipPmTrafficRadioAgg24hrTimeAndDate | read-only | mandatory | This value indicates the time and date for the specific PM. |
| 1.3.6.1.4.1.2281.10.6.2.3.1.4 | ColumngenEquipPmTrafficRadioAgg24hrES | read-only | mandatory | This value indicates the ES value. |
| 1.3.6.1.4.1.2281.10.6.2.3.1.5 | ColumngenEquipPmTrafficRadioAgg24hrSES | read-only | mandatory | This value indicates the SES value. |
| 1.3.6.1.4.1.2281.10.6.2.3.1.6 | ColumngenEquipPmTrafficRadioAgg24hrUAS | read-only | mandatory | This value indicates the UAS value. |
| 1.3.6.1.4.1.2281.10.6.2.3.1.7 | ColumngenEquipPmTrafficRadioAgg24hrBBE | read-only | mandatory | This value indicates the BBE value. |
| 1.3.6.1.4.1.2281.10.6.2.3.1.8 | ColumngenEquipPmTrafficRadioAgg24hrIDF | read-only | mandatory | This value indicates the IDF (Invalid Data Flag) of the interval. integrity(0), nointegrity(1). |
| 1.3.6.1.4.1.2281.10.6.2.4 | TablegenEquipPmTrafficRadioAgg24hrCurrTable | not-accessible | mandatory | This table indicates the Radio Aggregate PM data for all 15 min intervals. |
| 1.3.6.1.4.1.2281.10.6.2.4.1 | RowgenEquipPmTrafficRadioAgg24hrCurrEntry | not-accessible | mandatory | This table indicates the Radio Aggregate PM data for all 15 min intervals. |
| 1.3.6.1.4.1.2281.10.6.2.4.1.1 | ColumngenEquipPmTrafficRadioAgg24hrCurrId | read-only | mandatory | This value indicates an index of a specific RFU |
| 1.3.6.1.4.1.2281.10.6.2.4.1.2 | ColumngenEquipPmTrafficRadioAgg24hrCurrIfIndex | read-only | mandatory | This value indicates the interface index of a specific RFU (as appears in the ifTable) |
| 1.3.6.1.4.1.2281.10.6.2.4.1.3 | ColumngenEquipPmTrafficRadioAgg24hrCurrTimeAndDate | read-only | mandatory | This value indicates the time and date for the specific PM. |
| 1.3.6.1.4.1.2281.10.6.2.4.1.4 | ColumngenEquipPmTrafficRadioAgg24hrCurrES | read-only | mandatory | This value indicates the ES value. |
| 1.3.6.1.4.1.2281.10.6.2.4.1.5 | ColumngenEquipPmTrafficRadioAgg24hrCurrSES | read-only | mandatory | This value indicates the SES value. |
| 1.3.6.1.4.1.2281.10.6.2.4.1.6 | ColumngenEquipPmTrafficRadioAgg24hrCurrUAS | read-only | mandatory | This value indicates the UAS value. |
| 1.3.6.1.4.1.2281.10.6.2.4.1.7 | ColumngenEquipPmTrafficRadioAgg24hrCurrBBE | read-only | mandatory | This value indicates the BBE value. |
| 1.3.6.1.4.1.2281.10.6.2.4.1.8 | ColumngenEquipPmTrafficRadioAgg24hrCurrIDF | read-only | mandatory | This value indicates the IDF (Invalid Data Flag) of the current interval. integrity(0), nointegrity(1). |
| 1.3.6.1.4.1.2281.10.6.3 | NodegenEquipPmAll | |||
| 1.3.6.1.4.1.2281.10.6.3.1 | ScalargenEquipPmClear | read-write | mandatory | Clear All values for PM tables. |
| 1.3.6.1.4.1.2281.10.6.3.2 | NodegenEquipPmTrafficSL | |||
| 1.3.6.1.4.1.2281.10.6.3.2.1 | TablegenEquipPmTrafficSLTable | not-accessible | mandatory | This table indicates the RFU Signal Level PM data. |
| 1.3.6.1.4.1.2281.10.6.3.2.1.1 | RowgenEquipPmTrafficSLEntry | not-accessible | mandatory | Entry containing the data of the RFU signal level PM. |
| 1.3.6.1.4.1.2281.10.6.3.2.1.1.1 | ColumngenEquipPmTrafficSLPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours |
| 1.3.6.1.4.1.2281.10.6.3.2.1.1.2 | ColumngenEquipPmTrafficSLId | read-only | mandatory | This value indicates an index of a specific RFU |
| 1.3.6.1.4.1.2281.10.6.3.2.1.1.3 | ColumngenEquipPmTrafficSLInterval | read-only | mandatory | This value indicates an index of a specific PM Interval |
| 1.3.6.1.4.1.2281.10.6.3.2.1.1.4 | ColumngenEquipPmTrafficSLMinRsl | read-only | mandatory | This value indicates the min RSL value. |
| 1.3.6.1.4.1.2281.10.6.3.2.1.1.5 | ColumngenEquipPmTrafficSLMaxRsl | read-only | mandatory | This value indicates the max RSL value. |
| 1.3.6.1.4.1.2281.10.6.3.2.1.1.6 | ColumngenEquipPmTrafficSLRslExceed1 | read-only | mandatory | This value indicates the number of seconds RSL exceeded threshold number 1. |
| 1.3.6.1.4.1.2281.10.6.3.2.1.1.7 | ColumngenEquipPmTrafficSLRslExceed2 | read-only | mandatory | This value indicates the number of seconds RSL exceeded threshold number 2. |
| 1.3.6.1.4.1.2281.10.6.3.2.1.1.8 | ColumngenEquipPmTrafficSLMinTsl | read-only | mandatory | This value indicates the Minimum TSL value. |
| 1.3.6.1.4.1.2281.10.6.3.2.1.1.9 | ColumngenEquipPmTrafficSLMaxTsl | read-only | mandatory | This value indicates the Maximum TSL value. |
| 1.3.6.1.4.1.2281.10.6.3.2.1.1.10 | ColumngenEquipPmTrafficSLTslExceed | read-only | mandatory | This value indicates the number of seconds TSL exceeded the threshold |
| 1.3.6.1.4.1.2281.10.6.3.2.1.1.11 | ColumngenEquipPmTrafficSLIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.3 | NodegenEquipPmTrafficAggregate | |||
| 1.3.6.1.4.1.2281.10.6.3.3.1 | TablegenEquipPmTrafficAggTable | not-accessible | mandatory | This table indicates the Radio Aggregate PM data. |
| 1.3.6.1.4.1.2281.10.6.3.3.1.1 | RowgenEquipPmTrafficAggEntry | not-accessible | mandatory | This table indicates the Radio Aggregate PM data. |
| 1.3.6.1.4.1.2281.10.6.3.3.1.1.1 | ColumngenEquipPmTrafficAggPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours |
| 1.3.6.1.4.1.2281.10.6.3.3.1.1.2 | ColumngenEquipPmTrafficAggInterval | read-only | mandatory | This value indicates an index of a specific PM Interval |
| 1.3.6.1.4.1.2281.10.6.3.3.1.1.3 | ColumngenEquipPmTrafficAggES | read-only | mandatory | This value indicates the ES value (Errored seconds). |
| 1.3.6.1.4.1.2281.10.6.3.3.1.1.4 | ColumngenEquipPmTrafficAggSES | read-only | mandatory | This value indicates the SES value (Severe Errored seconds). |
| 1.3.6.1.4.1.2281.10.6.3.3.1.1.5 | ColumngenEquipPmTrafficAggUAS | read-only | mandatory | This value indicates the UAS value. (Unavailable Seconds) |
| 1.3.6.1.4.1.2281.10.6.3.3.1.1.6 | ColumngenEquipPmTrafficAggBBE | read-only | mandatory | This value indicates the BBE value. (Background Block Error) |
| 1.3.6.1.4.1.2281.10.6.3.3.1.1.7 | ColumngenEquipPmTrafficAggIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.4 | NodegenEquipPmRadio | |||
| 1.3.6.1.4.1.2281.10.6.3.4.1 | NodegenEquipPmRadioMRMC | |||
| 1.3.6.1.4.1.2281.10.6.3.4.1.1 | TablegenEquipPmRadioMRMCTable | not-accessible | mandatory | The MRMC PM table |
| 1.3.6.1.4.1.2281.10.6.3.4.1.1.1 | RowgenEquipPmRadioMRMCEntry | not-accessible | mandatory | The MRMC PM table |
| 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.1 | ColumngenEquipPmRadioMRMCPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours |
| 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.2 | ColumngenEquipPmRadioMRMCId | read-only | mandatory | This value indicates an index of a specific RFU |
| 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.3 | ColumngenEquipPmRadioMRMCInterval | read-only | mandatory | This value indicates an index of a specific PM Interval |
| 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.4 | ColumngenEquipPmRadioMRMCIfIndex | read-only | mandatory | This value indicates the interface index of a specific RFU interface (as appears in the ifTable) |
| 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.5 | ColumngenEquipPmRadioMRMCMinProfile | read-only | mandatory | Minimum MRMC profile. |
| 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.6 | ColumngenEquipPmRadioMRMCMaxProfile | read-only | mandatory | The maximum profile (Kbps) that was measured during the interva |
| 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.7 | ColumngenEquipPmRadioMRMCMinBitrate | read-only | mandatory | Minimum MRMC nominal bitrate (Units are Kbps) |
| 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.8 | ColumngenEquipPmRadioMRMCMaxBitrate | read-only | mandatory | Maximum MRMC nominal bitrate (Units are Kbps) |
| 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.9 | ColumngenEquipPmRadioMRMCMinTDMIf | read-only | mandatory | Minimum number of allocated TDM channels |
| 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.10 | ColumngenEquipPmRadioMRMCMaxTDMIf | read-only | mandatory | Maximum number of allocated TDM channels |
| 1.3.6.1.4.1.2281.10.6.3.4.1.1.1.11 | ColumngenEquipPmRadioMRMCIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.4.2 | NodegenEquipPmRadioTDM | |||
| 1.3.6.1.4.1.2281.10.6.3.4.2.1 | TablegenEquipPmRadioTDMTable | not-accessible | mandatory | The PM table of logical TDM channels within the Radio link |
| 1.3.6.1.4.1.2281.10.6.3.4.2.1.1 | RowgenEquipPmRadioTDMEntry | not-accessible | mandatory | The PM table of logical TDM channels within the Radio link |
| 1.3.6.1.4.1.2281.10.6.3.4.2.1.1.1 | ColumngenEquipPmRadioTDMPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours |
| 1.3.6.1.4.1.2281.10.6.3.4.2.1.1.2 | ColumngenEquipPmRadioTDMInterval | read-only | mandatory | The interval of the PM |
| 1.3.6.1.4.1.2281.10.6.3.4.2.1.1.3 | ColumngenEquipPmRadioTDMRadioUAS | read-only | mandatory | TDM channel UAS (unavailable seconds) |
| 1.3.6.1.4.1.2281.10.6.3.4.2.1.1.4 | ColumngenEquipPmRadioTDMIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.4.3 | NodegenEquipPmRadioEthernet | |||
| 1.3.6.1.4.1.2281.10.6.3.4.3.1 | TablegenEquipPmRadioEthernetTable | not-accessible | mandatory | The Ethernet PMs on the radio link |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1 | RowgenEquipPmRadioEthernetEntry | not-accessible | mandatory | The Ethernet PMs on the radio link |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.1 | ColumngenEquipPmRadioEthernetPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.2 | ColumngenEquipPmRadioEthernetInterval | read-only | mandatory | The interval of the PM |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.3 | ColumngenEquipPmRadioEthernetFrameErrorRate | read-only | mandatory | Ethernet Frame Error Rate PM |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.4 | ColumngenEquipPmRadioEthernetPeakThroughput | read-only | mandatory | Ethernet Peak throughput PM (Units are bits per second) |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.5 | ColumngenEquipPmRadioEthernetAverageThroughput | read-only | mandatory | Ethernet Average throughput PM (Units are bits per second) |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.6 | ColumngenEquipPmRadioEthernetExceedThroughput | read-only | mandatory | Ethernet Exceed throughput PM |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.7 | ColumngenEquipPmRadioEthernetPeakCapacity | read-only | mandatory | Ethernet Peak capacity PM (in bps) |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.8 | ColumngenEquipPmRadioEthernetAverageCapacity | read-only | mandatory | Ethernet Average capacity PM (in bps) |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.9 | ColumngenEquipPmRadioEthernetExceedCapacity | read-only | mandatory | Ethernet Exceed capacity PM |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.10 | ColumngenEquipPmRadioEthernetPeakUtilization | read-only | mandatory | Ethernet Peak utilization PM (%) |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.11 | ColumngenEquipPmRadioEthernetAverageUtilization | read-only | mandatory | Ethernet Average utilization PM (%) |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.12 | ColumngenEquipPmRadioEthernetExceedUtilization | read-only | mandatory | Ethernet Exceed utilization PM |
| 1.3.6.1.4.1.2281.10.6.3.4.3.1.1.13 | ColumngenEquipPmRadioEthernetIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.2 | TablegenEquipPmRadioEthernetThresholdTable | not-accessible | mandatory | The Ethernet PMs on the radio link |
| 1.3.6.1.4.1.2281.10.6.3.4.3.2.1 | RowgenEquipPmRadioEthernetThresholdEntry | not-accessible | mandatory | The Ethernet PMs on the radio link |
| 1.3.6.1.4.1.2281.10.6.3.4.3.2.1.1 | ColumngenEquipPmRadioEthernetThresholdThroughput | read-write | mandatory | Ethernet Throughput threshold (in Mbps) |
| 1.3.6.1.4.1.2281.10.6.3.4.3.2.1.2 | ColumngenEquipPmRadioEthernetThresholdCapacity | read-write | mandatory | Ethernet capacity threshold (in Mbps) |
| 1.3.6.1.4.1.2281.10.6.3.4.3.2.1.3 | ColumngenEquipPmRadioEthernetThresholdUtilization | read-write | mandatory | Ethernet utilization threshold (in percentage). |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3 | TablegenEquipPmRadioEthernetEtmTable | not-accessible | mandatory | The Ethernet PMs on the radio link |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1 | RowgenEquipPmRadioEthernetEtmEntry | not-accessible | mandatory | The entry of Ethernet ETM PMs on the radio link |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.1 | ColumngenEquipPmRadioEthernetEtmPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.2 | ColumngenEquipPmRadioEthernetEtmPmQueueIndex | read-only | mandatory | Queue index |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.3 | ColumngenEquipPmRadioEthernetEtmInterval | read-only | mandatory | The interval of the PM. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.4 | ColumngenEquipPmRadioEthernetEtmPmMaxGreenBytesPassed | read-only | mandatory | Maximum Green Traffic Passed Bytes. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.5 | ColumngenEquipPmRadioEthernetEtmPmAvgGreenBytesPassed | read-only | mandatory | Average Green Traffic Passed Bytes. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.6 | ColumngenEquipPmRadioEthernetEtmPmMaxGreenFramesDropped | read-only | mandatory | Maximum Green Traffic Frames Droped by WRED. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.7 | ColumngenEquipPmRadioEthernetEtmPmAvgGreenFramesDropped | read-only | mandatory | Average Green Traffic Frames Droped by WRED. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.8 | ColumngenEquipPmRadioEthernetEtmPmMaxYellowBytesPassed | read-only | mandatory | Maximum Yellow Traffic Passed Bytes. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.9 | ColumngenEquipPmRadioEthernetEtmPmAvgYellowBytesPassed | read-only | mandatory | Average Yellow Traffic Passed Bytes. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.10 | ColumngenEquipPmRadioEthernetEtmPmMaxYellowFramesDropped | read-only | mandatory | Maximum Yellow Traffic Frames Droped by WRED. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.11 | ColumngenEquipPmRadioEthernetEtmPmAvgYellowFramesDropped | read-only | mandatory | Average Yellow Traffic Frames Droped by WRED. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.12 | ColumngenEquipPmRadioEthernetEtmPmMaxRedFramesDropped | read-only | mandatory | Maximum Red Traffic Frames Dropped. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.13 | ColumngenEquipPmRadioEthernetEtmPmAvgRedFramesDropped | read-only | mandatory | Average Red Traffic Frames Dropped. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.14 | ColumngenEquipPmRadioEthernetEtmPmIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.17 | ColumngenEquipPmRadioEthernetEtmPmMaxGreenFramesPassed | read-only | mandatory | Maximum Green Traffic Frames Passed. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.18 | ColumngenEquipPmRadioEthernetEtmPmAvgGreenFramesPassed | read-only | mandatory | Average Green Traffic Frames Passed. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.21 | ColumngenEquipPmRadioEthernetEtmPmMaxYellowFramesPassed | read-only | mandatory | Maximum Yellow Traffic Frames Passed. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.22 | ColumngenEquipPmRadioEthernetEtmPmAvgYellowFramesPassed | read-only | mandatory | Average Yellow Traffic Frames Passed. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.23 | ColumngenEquipPmRadioEthernetEtmPmMaxRedBytesDropped | read-only | mandatory | Maximum Red Traffic Bytes Dropped. |
| 1.3.6.1.4.1.2281.10.6.3.4.3.3.1.24 | ColumngenEquipPmRadioEthernetEtmPmAvgRedBytesDropped | read-only | mandatory | Average Red Traffic Bytes Dropped. |
| 1.3.6.1.4.1.2281.10.6.3.4.4 | TablegenEquipPmRadioMSETable | not-accessible | mandatory | Radio MSE PM |
| 1.3.6.1.4.1.2281.10.6.3.4.4.1 | RowgenEquipPmRadioMSEEntry | not-accessible | mandatory | Radio MSE PM |
| 1.3.6.1.4.1.2281.10.6.3.4.4.1.1 | ColumngenEquipPmRadioMSEPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours |
| 1.3.6.1.4.1.2281.10.6.3.4.4.1.2 | ColumngenEquipPmRadioMSEInterval | read-only | mandatory | The interval of the PM |
| 1.3.6.1.4.1.2281.10.6.3.4.4.1.3 | ColumngenEquipPmRadioMSEMinMse | read-only | mandatory | This parameter holds the minimum MSE value detected in the interval. |
| 1.3.6.1.4.1.2281.10.6.3.4.4.1.4 | ColumngenEquipPmRadioMSEMaxMse | read-only | mandatory | This parameter holds the maximum MSE value detected in the interval. |
| 1.3.6.1.4.1.2281.10.6.3.4.4.1.5 | ColumngenEquipPmRadioMSEexceeded | read-only | mandatory | This parameter holds the number of seconds that the MSE exceeded the configured threshold. |
| 1.3.6.1.4.1.2281.10.6.3.4.4.1.6 | ColumngenEquipPmRadioMSEIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.4.5 | TablegenEquipPmRadioThresholdTable | not-accessible | mandatory | Radio MSE PM |
| 1.3.6.1.4.1.2281.10.6.3.4.5.1 | RowgenEquipPmRadioThresholdEntry | not-accessible | mandatory | Radio MSE PM |
| 1.3.6.1.4.1.2281.10.6.3.4.5.1.1 | ColumngenEquipPmRadioThresholdMSE | read-write | mandatory | The threshold above which MSE (Mean Square Error) exceeded seconds will be counted |
| 1.3.6.1.4.1.2281.10.6.3.4.5.1.2 | ColumngenEquipPmRadioThresholdRSL1 | read-write | mandatory | The threshold below which RSL 1 exceeded seconds will be counted |
| 1.3.6.1.4.1.2281.10.6.3.4.5.1.3 | ColumngenEquipPmRadioThresholdRSL2 | read-write | mandatory | The threshold below which RSL 2 exceeded seconds will be counted |
| 1.3.6.1.4.1.2281.10.6.3.4.5.1.4 | ColumngenEquipPmRadioThresholdTSL | read-write | mandatory | The threshold above which TSL exceeded seconds will be counted |
| 1.3.6.1.4.1.2281.10.6.3.4.5.1.5 | ColumngenEquipPmRadioThresholdXPI | read-write | mandatory | The threshold above which XPI (Cross Polar Interference) exceeded seconds will be counted |
| 1.3.6.1.4.1.2281.10.6.3.4.6 | TablegenEquipPmRadioXPITable | not-accessible | mandatory | Radio XPIC PM |
| 1.3.6.1.4.1.2281.10.6.3.4.6.1 | RowgenEquipPmRadioXPIEntry | not-accessible | mandatory | Radio XPIC PM |
| 1.3.6.1.4.1.2281.10.6.3.4.6.1.1 | ColumngenEquipPmRadioXPIPmType | read-only | mandatory | The interval of the PM |
| 1.3.6.1.4.1.2281.10.6.3.4.6.1.2 | ColumngenEquipPmRadioXPIPmInterval | read-only | mandatory | The number of the interval: 1-30 in case the interval is 24 hours or 1-900 in case the interval is 15 minutes |
| 1.3.6.1.4.1.2281.10.6.3.4.6.1.3 | ColumngenEquipPmRadioXPIPmMinXPI | read-only | mandatory | This parameter holds the minimum XPI value detected in the interval |
| 1.3.6.1.4.1.2281.10.6.3.4.6.1.4 | ColumngenEquipPmRadioXPIPmMaxXPI | read-only | mandatory | This parameter holds the maximum XPI value detected in the interval |
| 1.3.6.1.4.1.2281.10.6.3.4.6.1.5 | ColumngenEquipPmRadioXPIBelowThreshold | read-only | mandatory | This parameter holds the number of seconds in the interval that the XPI value was below the configured threshold. |
| 1.3.6.1.4.1.2281.10.6.3.4.6.1.6 | ColumngenEquipPmRadioXPIIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.4.7 | ScalargenEquipPmRadioClear | read-write | mandatory | Clear all radio PMs (Performance Monitoring). |
| 1.3.6.1.4.1.2281.10.6.3.5 | NodegenEquipPmTDM | |||
| 1.3.6.1.4.1.2281.10.6.3.5.1 | TablegenEquipPmTdmTable | not-accessible | mandatory | The line TDM PM table |
| 1.3.6.1.4.1.2281.10.6.3.5.1.1 | RowgenEquipPmTdmEntry | not-accessible | mandatory | The line TDM PM table |
| 1.3.6.1.4.1.2281.10.6.3.5.1.1.1 | ColumngenEquipPmTdmPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours |
| 1.3.6.1.4.1.2281.10.6.3.5.1.1.2 | ColumngenEquipPmTdmInterval | read-only | mandatory | The interval of the PM |
| 1.3.6.1.4.1.2281.10.6.3.5.1.1.3 | ColumngenEquipPmTdmES | read-only | mandatory | ES PM (Errored second) |
| 1.3.6.1.4.1.2281.10.6.3.5.1.1.4 | ColumngenEquipPmTdmSES | read-only | mandatory | SES PM (Severe Errored Seconds) |
| 1.3.6.1.4.1.2281.10.6.3.5.1.1.5 | ColumngenEquipPmTdmUAS | read-only | mandatory | UAS PM (Unavailable Seconds). |
| 1.3.6.1.4.1.2281.10.6.3.5.1.1.6 | ColumngenEquipPmTdmBBE | read-only | mandatory | BBE PM (Background Block Errors) |
| 1.3.6.1.4.1.2281.10.6.3.5.1.1.7 | ColumngenEquipPmTdmIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.6 | NodegenEquipPmSDH | |||
| 1.3.6.1.4.1.2281.10.6.3.6.1 | TablegenEquipPmSdhTable | not-accessible | mandatory | The line SDH PM table. |
| 1.3.6.1.4.1.2281.10.6.3.6.1.1 | RowgenEquipPmSdhEntry | not-accessible | mandatory | The line SDH PM table. |
| 1.3.6.1.4.1.2281.10.6.3.6.1.1.1 | ColumngenEquipPmSdhPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours. |
| 1.3.6.1.4.1.2281.10.6.3.6.1.1.2 | ColumngenEquipPmSdhInterval | read-only | mandatory | The interval of the PM. |
| 1.3.6.1.4.1.2281.10.6.3.6.1.1.3 | ColumngenEquipPmSdhES | read-only | mandatory | ES STM-1/OC-3 PM. |
| 1.3.6.1.4.1.2281.10.6.3.6.1.1.4 | ColumngenEquipPmSdhSES | read-only | mandatory | SES STM-1/OC-3 PM. |
| 1.3.6.1.4.1.2281.10.6.3.6.1.1.5 | ColumngenEquipPmSdhEB | read-only | mandatory | EB STM-1/OC-3 PM (Errored block). |
| 1.3.6.1.4.1.2281.10.6.3.6.1.1.6 | ColumngenEquipPmSdhBBE | read-only | mandatory | BBE PM (background errored block STM-1/OC-3 PM or CVL PM (code violation line) when using OC-3. |
| 1.3.6.1.4.1.2281.10.6.3.6.1.1.7 | ColumngenEquipPmSdhIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.6.1.1.8 | ColumngenEquipPmSdhIfIndex | read-only | mandatory | Port Number. |
| 1.3.6.1.4.1.2281.10.6.3.6.1.1.9 | ColumngenEquipPmSdhTimeStamp | read-only | mandatory | This value indicates the time stamp of the interval. |
| 1.3.6.1.4.1.2281.10.6.3.6.1.1.10 | ColumngenEquipPmSdhUAS | read-only | mandatory | Un-Available Seconds STM-1/OC-3 PM. |
| 1.3.6.1.4.1.2281.10.6.3.6.2 | TablegenEquipPmSdhRstLRTable | not-accessible | mandatory | SONET/STM-1 interface-level PMs for line to radio direction. |
| 1.3.6.1.4.1.2281.10.6.3.6.2.1 | RowgenEquipPmSdhRstLREntry | not-accessible | mandatory | SONET/STM-1 interface-level PMs for line to radio direction entry. |
| 1.3.6.1.4.1.2281.10.6.3.6.2.1.1 | ColumngenEquipPmSdhRstLRPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours. |
| 1.3.6.1.4.1.2281.10.6.3.6.2.1.2 | ColumngenEquipPmSdhRstLRIfIndex | read-only | mandatory | Port number. |
| 1.3.6.1.4.1.2281.10.6.3.6.2.1.3 | ColumngenEquipPmSdhRstLRInterval | read-only | mandatory | The interval of the PM. |
| 1.3.6.1.4.1.2281.10.6.3.6.2.1.4 | ColumngenEquipPmSdhRstLRTimeStamp | read-only | mandatory | This value indicates the time stamp of the interval. |
| 1.3.6.1.4.1.2281.10.6.3.6.2.1.5 | ColumngenEquipPmSdhRstLRES | read-only | mandatory | Errored Seconds PM for STM-1/OC-3 on line to radio direction. |
| 1.3.6.1.4.1.2281.10.6.3.6.2.1.6 | ColumngenEquipPmSdhRstLRSES | read-only | mandatory | Severely Errored Seconds PM for STM-1/OC-3 on line to radio direction. |
| 1.3.6.1.4.1.2281.10.6.3.6.2.1.7 | ColumngenEquipPmSdhRstLRUAS | read-only | mandatory | Unavailable Seconds PM for STM-1/OC-3. |
| 1.3.6.1.4.1.2281.10.6.3.6.2.1.8 | ColumngenEquipPmSdhRstLREB | read-only | mandatory | Errored Blocks PM for STM-1/OC-3 on line to radio direction. |
| 1.3.6.1.4.1.2281.10.6.3.6.2.1.9 | ColumngenEquipPmSdhRstLRCV | read-only | mandatory | Code Viloations PM for STM-1/OC-3 on line to radio direction. |
| 1.3.6.1.4.1.2281.10.6.3.6.2.1.10 | ColumngenEquipPmSdhRstLRBBE | read-only | mandatory | Background Block Error PM for STM-1/OC-3 on line to radio direction. |
| 1.3.6.1.4.1.2281.10.6.3.6.2.1.11 | ColumngenEquipPmSdhRstLRIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.6.3 | TablegenEquipPmSdhRstRLTable | not-accessible | mandatory | SONET/STM-1 interface-level PMs for radio to line direction. |
| 1.3.6.1.4.1.2281.10.6.3.6.3.1 | RowgenEquipPmSdhRstRLEntry | not-accessible | mandatory | SONET/STM-1 interface-level PMs for radio to line direction entry. |
| 1.3.6.1.4.1.2281.10.6.3.6.3.1.1 | ColumngenEquipPmSdhRstRLPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours. |
| 1.3.6.1.4.1.2281.10.6.3.6.3.1.2 | ColumngenEquipPmSdhRstRLIfIndex | read-only | mandatory | Port number. |
| 1.3.6.1.4.1.2281.10.6.3.6.3.1.3 | ColumngenEquipPmSdhRstRLInterval | read-only | mandatory | The interval of the PM. |
| 1.3.6.1.4.1.2281.10.6.3.6.3.1.4 | ColumngenEquipPmSdhRstRLTimeStamp | read-only | mandatory | This value indicates the time stamp of the interval. |
| 1.3.6.1.4.1.2281.10.6.3.6.3.1.5 | ColumngenEquipPmSdhRstRLES | read-only | mandatory | Errored Seconds PM for STM-1/OC-3 on radio to line direction. |
| 1.3.6.1.4.1.2281.10.6.3.6.3.1.6 | ColumngenEquipPmSdhRstRLSES | read-only | mandatory | Severely Errored Seconds PM for STM-1/OC-3 on radio to line direction. |
| 1.3.6.1.4.1.2281.10.6.3.6.3.1.7 | ColumngenEquipPmSdhRstRLUAS | read-only | mandatory | Unavailable Seconds PM for STM-1/OC-3. |
| 1.3.6.1.4.1.2281.10.6.3.6.3.1.8 | ColumngenEquipPmSdhRstRLEB | read-only | mandatory | Errored Blocks PM for STM-1/OC-3 on radio to line direction. |
| 1.3.6.1.4.1.2281.10.6.3.6.3.1.9 | ColumngenEquipPmSdhRstRLCV | read-only | mandatory | Code Viloations PM for STM-1/OC-3 on radio to line direction. |
| 1.3.6.1.4.1.2281.10.6.3.6.3.1.10 | ColumngenEquipPmSdhRstRLBBE | read-only | mandatory | Background Block Error PM for STM-1/OC-3 on radio to line direction. |
| 1.3.6.1.4.1.2281.10.6.3.6.3.1.11 | ColumngenEquipPmSdhRstRLIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.7 | NodegenEquipPmTrails | |||
| 1.3.6.1.4.1.2281.10.6.3.7.1 | TablegenEquipPmTrailsEndPointTable | not-accessible | mandatory | PM table of the E1/T1 trails. |
| 1.3.6.1.4.1.2281.10.6.3.7.1.1 | RowgenEquipPmTrailsEndPointEntry | not-accessible | mandatory | PM table of the E1/T1 trails. |
| 1.3.6.1.4.1.2281.10.6.3.7.1.1.1 | ColumngenEquipPmTrailsEndPointPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours. |
| 1.3.6.1.4.1.2281.10.6.3.7.1.1.2 | ColumngenEquipPmTrailsEndPointId | read-only | mandatory | This value indicates the trail id. |
| 1.3.6.1.4.1.2281.10.6.3.7.1.1.3 | ColumngenEquipPmTrailsEndPointEPId | read-only | mandatory | This value indicates the end point number for this trail. If the trail is protected, there will be two end points for the trail (primary path and the secondary… |
| 1.3.6.1.4.1.2281.10.6.3.7.1.1.4 | ColumngenEquipPmTrailsEndPointInterval | read-only | mandatory | The interval of the PM. |
| 1.3.6.1.4.1.2281.10.6.3.7.1.1.5 | ColumngenEquipPmTrailsEndPointES | read-only | mandatory | ES PM (Errored Seconds). |
| 1.3.6.1.4.1.2281.10.6.3.7.1.1.6 | ColumngenEquipPmTrailsEndPointSES | read-only | mandatory | SES PM (Severe Errored Seconds). |
| 1.3.6.1.4.1.2281.10.6.3.7.1.1.7 | ColumngenEquipPmTrailsEndPointUAS | read-only | mandatory | UAS PM (Unavailable Seconds). |
| 1.3.6.1.4.1.2281.10.6.3.7.1.1.8 | ColumngenEquipPmTrailsEndPointBBE | read-only | mandatory | BBE PM (Background Block Errors). |
| 1.3.6.1.4.1.2281.10.6.3.7.1.1.9 | ColumngenEquipPmTrailsEndPointNoOfSwitches | read-only | mandatory | A counter of the number of SNCP switches (between primary and secondary paths) that trail had in the relevant interval. |
| 1.3.6.1.4.1.2281.10.6.3.7.1.1.10 | ColumngenEquipPmTrailsEndPointActivePathCounts | read-only | mandatory | Active path seconds. |
| 1.3.6.1.4.1.2281.10.6.3.7.1.1.11 | ColumngenEquipPmTrailsEndPointIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.8 | NodegenEquipPmPW | |||
| 1.3.6.1.4.1.2281.10.6.3.8.1 | TablegenEquipPmPWTable | not-accessible | mandatory | This table shows standard pseudowire-level PM measurements. Notice that PMs at the TDM port level are maintained separately. |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1 | RowgenEquipPmPWEntry | not-accessible | mandatory | This table shows standard pseudowire-level PM measurements. Notice that PMs at the TDM port level are maintained separately. |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1.1 | ColumngenEquipPmPWPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours. |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1.2 | ColumngenEquipPmPWId | read-only | mandatory | This value indicates the trail id. |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1.3 | ColumngenEquipPmPWInterval | read-only | mandatory | The interval of the PM. |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1.4 | ColumngenEquipPmPWMissingPkts | read-only | mandatory | Number of missing packets (as detected via control word sequence number gaps). |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1.5 | ColumngenEquipPmPWPktsReOrder | read-only | mandatory | Number of packets detected out of sequence (via control word sequence number) but successfully re-ordered. |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1.6 | ColumngenEquipPmPWtrBfrUnderruns | read-only | mandatory | Number of times a packet needed to be played out and the jitter buffer was empty. |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1.7 | ColumngenEquipPmPWMisOrderDropped | read-only | mandatory | Number of packets detected out of order (via control word sequence numbers) that could not be re-ordered or could not fit in the jitter buffer. |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1.8 | ColumngenEquipPmPWMalformedPkt | read-only | mandatory | Number of packets detected with unexpected size, or bad headers' stack. |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1.9 | ColumngenEquipPmPWES | read-only | mandatory | ES PM (Errored Seconds). |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1.10 | ColumngenEquipPmPWSES | read-only | mandatory | SES PM (Severe Errored Seconds). |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1.11 | ColumngenEquipPmPWUAS | read-only | mandatory | UAS PM (Unavailable Seconds). |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1.12 | ColumngenEquipPmPWFC | read-only | mandatory | FC (Failure Counts) PM. A failure is a LOPS event. |
| 1.3.6.1.4.1.2281.10.6.3.8.1.1.13 | ColumngenEquipPmPWIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.8.2 | TablegenEquipPmNGPWTable | not-accessible | mandatory | This table contains PW Performance Monitoring counters. |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1 | RowgenEquipPmNGPWEntry | not-accessible | mandatory | This table entry contains PW Performance Monitoring counters. |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1.1 | ColumngenEquipPmNGPWPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours. |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1.2 | ColumngenEquipPmNGPWIfIndex | read-only | mandatory | This value indicates the interface Index. |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1.3 | ColumngenEquipPmNGPWInterval | read-only | mandatory | The interval of the PM. |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1.4 | ColumngenEquipPmNGPWES | read-only | mandatory | ES (Errored Seconds) PM. |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1.5 | ColumngenEquipPmNGPWSES | read-only | mandatory | SES (Severe Errored Seconds) PM. |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1.6 | ColumngenEquipPmNGPWUAS | read-only | mandatory | UAS (Unavailable Seconds) PM. |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1.7 | ColumngenEquipPmNGPWFC | read-only | mandatory | FC (Failure Counts) PM. A failure is a LOPS event. |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1.8 | ColumngenEquipPmNGPWFER | read-only | mandatory | Frame Error Ratio. |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1.9 | ColumngenEquipPmNGPWMissingPkts | read-only | mandatory | Number of missing packets (as detected via control word sequence number gaps). |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1.10 | ColumngenEquipPmNGPWPktsReOrder | read-only | mandatory | Number of packets detected out of sequence (via control word sequence number) but successfully re-ordered. |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1.11 | ColumngenEquipPmNGPWMisOrderDropped | read-only | mandatory | Number of packets detected out of order (via control word sequence numbers) that could not be re-ordered or could not fit in the jitter buffer. |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1.12 | ColumngenEquipPmNGPWMalformedPkt | read-only | mandatory | Number of packets detected with unexpected size, or bad headers' stack. |
| 1.3.6.1.4.1.2281.10.6.3.8.2.1.13 | ColumngenEquipPmNGPWIdf | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.9 | NodegenEquipPmEthUtilization | |||
| 1.3.6.1.4.1.2281.10.6.3.9.1 | ScalargenEquipPmEthUtilizationAdmin | read-write | mandatory | Ethernet port utilization PM admin |
| 1.3.6.1.4.1.2281.10.6.3.9.2 | ScalargenEquipPmEthUtilizationThreshold | read-write | mandatory | User defined threshold for Ethernet port utilization PM. |
| 1.3.6.1.4.1.2281.10.6.3.9.3 | TablegenEquipPmEthUtilizationTable | not-accessible | mandatory | The Ethernet ports Utilization PMs |
| 1.3.6.1.4.1.2281.10.6.3.9.3.1 | RowgenEquipPmEthUtilizationEntry | not-accessible | mandatory | The Ethernet ports Utilization PMs |
| 1.3.6.1.4.1.2281.10.6.3.9.3.1.1 | ColumngenEquipPmEthUtilizationPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours |
| 1.3.6.1.4.1.2281.10.6.3.9.3.1.2 | ColumngenEquipPmEthUtilizationInterval | read-only | mandatory | The interval of the PM |
| 1.3.6.1.4.1.2281.10.6.3.9.3.1.3 | ColumngenEquipPmEthUtilizationPeakUtilization | read-only | mandatory | Peak Ethernet port utilization of the current interval. |
| 1.3.6.1.4.1.2281.10.6.3.9.3.1.4 | ColumngenEquipPmEthUtilizationAverageUtilization | read-only | mandatory | Average Ethernet port utilization of the current interval. |
| 1.3.6.1.4.1.2281.10.6.3.9.3.1.5 | ColumngenEquipPmEthUtilizationExceedUtilization | read-only | mandatory | Number of seconds in current interval when Ethernet port utilization exceeded the user defined threshold. |
| 1.3.6.1.4.1.2281.10.6.3.9.3.1.6 | ColumngenEquipPmEthUtilizationIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.10 | NodegenEquipPmEthernetIngressPolicer | |||
| 1.3.6.1.4.1.2281.10.6.3.10.1 | TablegenEquipPmEthernetIngressPolicerUnicastStatisticsTable | not-accessible | mandatory | logical Interface unicast policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.10.1.1 | RowgenEquipPmEthernetIngressPolicerUnicastStatisticsEntry | not-accessible | mandatory | logical Interface unicast policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.10.1.1.1 | ColumngenEquipPmEthernetIngressPolicerUnicastStatisticsIfIndex | read-only | mandatory | Ethernet Logical port if-index table key |
| 1.3.6.1.4.1.2281.10.6.3.10.1.1.2 | ColumngenEquipPmEthernetIngressPolicerUnicastStatisticsClearOnRead | read-write | mandatory | Clear counter statistics after reading. |
| 1.3.6.1.4.1.2281.10.6.3.10.1.1.3 | ColumngenEquipPmEthernetIngressPolicerUnicastStatisticsGreenPacket | read-only | mandatory | The number of packets that were counted as green. |
| 1.3.6.1.4.1.2281.10.6.3.10.1.1.4 | ColumngenEquipPmEthernetIngressPolicerUnicastStatisticsGreenBytes | read-only | mandatory | The number of bytes that were counted as green. |
| 1.3.6.1.4.1.2281.10.6.3.10.1.1.5 | ColumngenEquipPmEthernetIngressPolicerUnicastStatisticsYellowPacket | read-only | mandatory | The number of packets that were counted as yellow. |
| 1.3.6.1.4.1.2281.10.6.3.10.1.1.6 | ColumngenEquipPmEthernetIngressPolicerUnicastStatisticsYellowBytes | read-only | mandatory | The number of bytes that were counted as yellow. |
| 1.3.6.1.4.1.2281.10.6.3.10.1.1.7 | ColumngenEquipPmEthernetIngressPolicerUnicastStatisticsRedPacket | read-only | mandatory | The number of packets that were counted as red. |
| 1.3.6.1.4.1.2281.10.6.3.10.1.1.8 | ColumngenEquipPmEthernetIngressPolicerUnicastStatisticsRedBytes | read-only | mandatory | The number of bytes that were counted as red. |
| 1.3.6.1.4.1.2281.10.6.3.10.2 | TablegenEquipPmEthernetIngressPolicerMulticastStatisticsTable | not-accessible | mandatory | Logical Port multicast policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.10.2.1 | RowgenEquipPmEthernetIngressPolicerMulticastStatisticsEntry | not-accessible | mandatory | Logical Port multicast policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.10.2.1.1 | ColumngenEquipPmEthernetIngressPolicerMulticastStatisticsIfIndex | read-only | mandatory | Ethernet Logical port if-index table key |
| 1.3.6.1.4.1.2281.10.6.3.10.2.1.2 | ColumngenEquipPmEthernetIngressPolicerMulticastStatisticsClearOnRead | read-write | mandatory | Clear counter statistics after reading. |
| 1.3.6.1.4.1.2281.10.6.3.10.2.1.3 | ColumngenEquipPmEthernetIngressPolicerMulticastStatisticsGreenPacket | read-only | mandatory | The number of packets that were counted as green. |
| 1.3.6.1.4.1.2281.10.6.3.10.2.1.4 | ColumngenEquipPmEthernetIngressPolicerMulticastStatisticsGreenBytes | read-only | mandatory | The number of bytes that were counted as green. |
| 1.3.6.1.4.1.2281.10.6.3.10.2.1.5 | ColumngenEquipPmEthernetIngressPolicerMulticastStatisticsYellowPacket | read-only | mandatory | The number of packets that were counted as yellow. |
| 1.3.6.1.4.1.2281.10.6.3.10.2.1.6 | ColumngenEquipPmEthernetIngressPolicerMulticastStatisticsYellowBytes | read-only | mandatory | The number of bytes that were counted as yellow. |
| 1.3.6.1.4.1.2281.10.6.3.10.2.1.7 | ColumngenEquipPmEthernetIngressPolicerMulticastStatisticsRedPacket | read-only | mandatory | The number of packets that were counted as red. |
| 1.3.6.1.4.1.2281.10.6.3.10.2.1.8 | ColumngenEquipPmEthernetIngressPolicerMulticastStatisticsRedBytes | read-only | mandatory | The number of bytes that were counted as red. |
| 1.3.6.1.4.1.2281.10.6.3.10.3 | TablegenEquipPmEthernetIngressPolicerBroadcastStatisticsTable | not-accessible | mandatory | Interface Logical Port broadcast policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.10.3.1 | RowgenEquipPmEthernetIngressPolicerBroadcastStatisticsEntry | not-accessible | mandatory | Interface Logical Port broadcast policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.10.3.1.1 | ColumngenEquipPmEthernetIngressPolicerBroadcastStatisticsIfIndex | read-only | mandatory | Ethernet Logical port if-index table key |
| 1.3.6.1.4.1.2281.10.6.3.10.3.1.2 | ColumngenEquipPmEthernetIngressPolicerBroadcastStatisticsClearOnRead | read-write | mandatory | Clear counter statistics after reading. |
| 1.3.6.1.4.1.2281.10.6.3.10.3.1.3 | ColumngenEquipPmEthernetIngressPolicerBroadcastStatisticsGreenPacket | read-only | mandatory | The number of packets that were counted as green. |
| 1.3.6.1.4.1.2281.10.6.3.10.3.1.4 | ColumngenEquipPmEthernetIngressPolicerBroadcastStatisticsGreenBytes | read-only | mandatory | The number of bytes that were counted as green. |
| 1.3.6.1.4.1.2281.10.6.3.10.3.1.5 | ColumngenEquipPmEthernetIngressPolicerBroadcastStatisticsYellowPacket | read-only | mandatory | The number of packets that were counted as yellow. |
| 1.3.6.1.4.1.2281.10.6.3.10.3.1.6 | ColumngenEquipPmEthernetIngressPolicerBroadcastStatisticsYellowBytes | read-only | mandatory | The number of bytes that were counted as yellow. |
| 1.3.6.1.4.1.2281.10.6.3.10.3.1.7 | ColumngenEquipPmEthernetIngressPolicerBroadcastStatisticsRedPacket | read-only | mandatory | The number of packets that were counted as red. |
| 1.3.6.1.4.1.2281.10.6.3.10.3.1.8 | ColumngenEquipPmEthernetIngressPolicerBroadcastStatisticsRedBytes | read-only | mandatory | The number of bytes that were counted as red. |
| 1.3.6.1.4.1.2281.10.6.3.10.4 | TablegenEquipPmEthernetIngressPolicerEtherType1StatisticsTable | not-accessible | mandatory | Interface Logical Port ether Type 1 policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.10.4.1 | RowgenEquipPmEthernetIngressPolicerEtherType1StatisticsEntry | not-accessible | mandatory | Interface Logical Port ether Type 1 policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.10.4.1.1 | ColumngenEquipPmEthernetIngressPolicerEtherType1StatisticsIfIndex | read-only | mandatory | Ethernet Logical port if-index table key |
| 1.3.6.1.4.1.2281.10.6.3.10.4.1.2 | ColumngenEquipPmEthernetIngressPolicerEtherType1StatisticsClearOnRead | read-write | mandatory | Clear counter statistics after reading. |
| 1.3.6.1.4.1.2281.10.6.3.10.4.1.3 | ColumngenEquipPmEthernetIngressPolicerEtherType1StatisticsGreenPacket | read-only | mandatory | The number of packets that were counted as green. |
| 1.3.6.1.4.1.2281.10.6.3.10.4.1.4 | ColumngenEquipPmEthernetIngressPolicerEtherType1StatisticsGreenBytes | read-only | mandatory | The number of bytes that were counted as green. |
| 1.3.6.1.4.1.2281.10.6.3.10.4.1.5 | ColumngenEquipPmEthernetIngressPolicerEtherType1StatisticsYellowPacket | read-only | mandatory | The number of packets that were counted as yellow. |
| 1.3.6.1.4.1.2281.10.6.3.10.4.1.6 | ColumngenEquipPmEthernetIngressPolicerEtherType1StatisticsYellowBytes | read-only | mandatory | The number of bytes that were counted as yellow. |
| 1.3.6.1.4.1.2281.10.6.3.10.4.1.7 | ColumngenEquipPmEthernetIngressPolicerEtherType1StatisticsRedPacket | read-only | mandatory | The number of packets that were counted as red. |
| 1.3.6.1.4.1.2281.10.6.3.10.4.1.8 | ColumngenEquipPmEthernetIngressPolicerEtherType1StatisticsRedBytes | read-only | mandatory | The number of bytes that were counted as red. |
| 1.3.6.1.4.1.2281.10.6.3.10.5 | TablegenEquipPmEthernetIngressPolicerEtherType2StatisticsTable | not-accessible | mandatory | Interface Logical Port ether Type 2 policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.10.5.1 | RowgenEquipPmEthernetIngressPolicerEtherType2StatisticsEntry | not-accessible | mandatory | Interface Logical Port ether Type 2 policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.10.5.1.1 | ColumngenEquipPmEthernetIngressPolicerEtherType2StatisticsIfIndex | read-only | mandatory | Ethernet Logical port if-index table key |
| 1.3.6.1.4.1.2281.10.6.3.10.5.1.2 | ColumngenEquipPmEthernetIngressPolicerEtherType2StatisticsClearOnRead | read-write | mandatory | Clear counter statistics after reading. |
| 1.3.6.1.4.1.2281.10.6.3.10.5.1.3 | ColumngenEquipPmEthernetIngressPolicerEtherType2StatisticsGreenPacket | read-only | mandatory | The number of packets that were counted as green. |
| 1.3.6.1.4.1.2281.10.6.3.10.5.1.4 | ColumngenEquipPmEthernetIngressPolicerEtherType2StatisticsGreenBytes | read-only | mandatory | The number of bytes that were counted as green. |
| 1.3.6.1.4.1.2281.10.6.3.10.5.1.5 | ColumngenEquipPmEthernetIngressPolicerEtherType2StatisticsYellowPacket | read-only | mandatory | The number of packets that were counted as yellow. |
| 1.3.6.1.4.1.2281.10.6.3.10.5.1.6 | ColumngenEquipPmEthernetIngressPolicerEtherType2StatisticsYellowBytes | read-only | mandatory | The number of bytes that were counted as yellow. |
| 1.3.6.1.4.1.2281.10.6.3.10.5.1.7 | ColumngenEquipPmEthernetIngressPolicerEtherType2StatisticsRedPacket | read-only | mandatory | The number of packets that were counted as red. |
| 1.3.6.1.4.1.2281.10.6.3.10.5.1.8 | ColumngenEquipPmEthernetIngressPolicerEtherType2StatisticsRedBytes | read-only | mandatory | The number of bytes that were counted as red. |
| 1.3.6.1.4.1.2281.10.6.3.10.6 | TablegenEquipPmEthernetIngressPolicerEtherType3StatisticsTable | not-accessible | mandatory | Interface Logical Port ether Type 3 policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.10.6.1 | RowgenEquipPmEthernetIngressPolicerEtherType3StatisticsEntry | not-accessible | mandatory | Interface Logical Port ether Type 3 policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.10.6.1.1 | ColumngenEquipPmEthernetIngressPolicerEtherType3StatisticsIfIndex | read-only | mandatory | Ethernet Logical port if-index table key |
| 1.3.6.1.4.1.2281.10.6.3.10.6.1.2 | ColumngenEquipPmEthernetIngressPolicerEtherType3StatisticsClearOnRead | read-write | mandatory | Clear counter statistics after reading. |
| 1.3.6.1.4.1.2281.10.6.3.10.6.1.3 | ColumngenEquipPmEthernetIngressPolicerEtherType3StatisticsGreenPacket | read-only | mandatory | The number of packets that were counted as green. |
| 1.3.6.1.4.1.2281.10.6.3.10.6.1.4 | ColumngenEquipPmEthernetIngressPolicerEtherType3StatisticsGreenBytes | read-only | mandatory | The number of bytes that were counted as green. |
| 1.3.6.1.4.1.2281.10.6.3.10.6.1.5 | ColumngenEquipPmEthernetIngressPolicerEtherType3StatisticsYellowPacket | read-only | mandatory | The number of packets that were counted as yellow. |
| 1.3.6.1.4.1.2281.10.6.3.10.6.1.6 | ColumngenEquipPmEthernetIngressPolicerEtherType3StatisticsYellowBytes | read-only | mandatory | The number of bytes that were counted as yellow. |
| 1.3.6.1.4.1.2281.10.6.3.10.6.1.7 | ColumngenEquipPmEthernetIngressPolicerEtherType3StatisticsRedPacket | read-only | mandatory | The number of packets that were counted as red. |
| 1.3.6.1.4.1.2281.10.6.3.10.6.1.8 | ColumngenEquipPmEthernetIngressPolicerEtherType3StatisticsRedBytes | read-only | mandatory | The number of bytes that were counted as red. |
| 1.3.6.1.4.1.2281.10.6.3.11 | TablegenEquipPmEthernetRmonStatisticsTable | not-accessible | mandatory | Interface physical Port RMON statistics. |
| 1.3.6.1.4.1.2281.10.6.3.11.1 | RowgenEquipPmEthernetRmonStatisticsEntry | not-accessible | mandatory | Interface physical Port RMON statistics. |
| 1.3.6.1.4.1.2281.10.6.3.11.1.1 | ColumngenEquipPmEthernetRmonStatisticsIfIndex | read-only | mandatory | Ethernet Physical port if-index table key |
| 1.3.6.1.4.1.2281.10.6.3.11.1.2 | ColumngenEquipPmEthernetRmonStatisticsClearOnRead | read-write | mandatory | Clear on read |
| 1.3.6.1.4.1.2281.10.6.3.11.1.3 | ColumngenEquipPmEthernetRmonStatisticsTxByteCount | read-only | mandatory | TX byte count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.4 | ColumngenEquipPmEthernetRmonStatisticsTxFrameCount | read-only | mandatory | TX frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.5 | ColumngenEquipPmEthernetRmonStatisticsTxMulticastFrameCount | read-only | mandatory | TX multicast frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.6 | ColumngenEquipPmEthernetRmonStatisticsTxBroadcastFrameCount | read-only | mandatory | TX broadcast frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.7 | ColumngenEquipPmEthernetRmonStatisticsTxControlFrameCount | read-only | mandatory | TX control frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.8 | ColumngenEquipPmEthernetRmonStatisticsTxPauseFrameCount | read-only | mandatory | TX pause frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.9 | ColumngenEquipPmEthernetRmonStatisticsTxFcsErrorFrameCount | read-only | mandatory | TX fcs error frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.10 | ColumngenEquipPmEthernetRmonStatisticsTxLengthErrorFrameCount | read-only | mandatory | TX length error frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.11 | ColumngenEquipPmEthernetRmonStatisticsTxOversizeFrameCount | read-only | mandatory | TX oversize frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.12 | ColumngenEquipPmEthernetRmonStatisticsTxUndersizeFrameCount | read-only | mandatory | TX undersize frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.13 | ColumngenEquipPmEthernetRmonStatisticsTxFragmentFrameCount | read-only | mandatory | TX fragment frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.14 | ColumngenEquipPmEthernetRmonStatisticsTxJabberFrameCount | read-only | mandatory | TX jabber frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.15 | ColumngenEquipPmEthernetRmonStatisticsTx64FrameCount | read-only | mandatory | TX 64 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.16 | ColumngenEquipPmEthernetRmonStatisticsTx65-127FrameCount | read-only | mandatory | TX 65-127 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.17 | ColumngenEquipPmEthernetRmonStatisticsTx128-255FrameCount | read-only | mandatory | TX 128-255 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.18 | ColumngenEquipPmEthernetRmonStatisticsTx256-511FrameCount | read-only | mandatory | TX 256-511 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.19 | ColumngenEquipPmEthernetRmonStatisticsTx512-1023FrameCount | read-only | mandatory | TX 512-1023 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.20 | ColumngenEquipPmEthernetRmonStatisticsTx1024-1518FrameCount | read-only | mandatory | TX 1024-1518 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.21 | ColumngenEquipPmEthernetRmonStatisticsTx1519-1522FrameCount | read-only | mandatory | TX 1519-1522 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.22 | ColumngenEquipPmEthernetRmonStatisticsRxByteCount | read-only | mandatory | RX byte count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.23 | ColumngenEquipPmEthernetRmonStatisticsRxFrameCount | read-only | mandatory | RX frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.24 | ColumngenEquipPmEthernetRmonStatisticsRxMulticastFrameCount | read-only | mandatory | RX multicast frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.25 | ColumngenEquipPmEthernetRmonStatisticsRxBroadcastFrameCount | read-only | mandatory | RX broadcast frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.26 | ColumngenEquipPmEthernetRmonStatisticsRxControlFrameCount | read-only | mandatory | RX control frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.27 | ColumngenEquipPmEthernetRmonStatisticsRxPauseFrameCount | read-only | mandatory | RX pause frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.28 | ColumngenEquipPmEthernetRmonStatisticsRxFcsErrorFrameCount | read-only | mandatory | RX fcs error frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.29 | ColumngenEquipPmEthernetRmonStatisticsRxLengthErrorFrameCount | read-only | mandatory | RX length error frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.30 | ColumngenEquipPmEthernetRmonStatisticsRxcode-ErrorCount | read-only | mandatory | RX code error count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.31 | ColumngenEquipPmEthernetRmonStatisticsRxoversizeFrameCount | read-only | mandatory | RX oversize frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.32 | ColumngenEquipPmEthernetRmonStatisticsRxundersize-ErrorFrameCount | read-only | mandatory | RX undersize error frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.33 | ColumngenEquipPmEthernetRmonStatisticsRxFragmentFrameCount | read-only | mandatory | RX fragment frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.35 | ColumngenEquipPmEthernetRmonStatisticsRx64FrameCount | read-only | mandatory | RX 64 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.36 | ColumngenEquipPmEthernetRmonStatisticsRx65-127FrameCount | read-only | mandatory | RX 65-127 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.37 | ColumngenEquipPmEthernetRmonStatisticsRx128-255FrameCount | read-only | mandatory | RX 128-255 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.38 | ColumngenEquipPmEthernetRmonStatisticsRx256-511FrameCount | read-only | mandatory | RX 256-511 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.39 | ColumngenEquipPmEthernetRmonStatisticsRx512-1023FrameCount | read-only | mandatory | RX 512-1023 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.40 | ColumngenEquipPmEthernetRmonStatisticsRx1024-1518FrameCount | read-only | mandatory | RX 1024-1518 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.41 | ColumngenEquipPmEthernetRmonStatisticsRx1519-1522FrameCount | read-only | mandatory | RX 1519-1522 frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.42 | ColumngenEquipPmEthernetRmonStatisticsRxExceedmaxFrameCount | read-only | mandatory | RX exceed max frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.43 | ColumngenEquipPmEthernetRmonStatisticsRxExceedMaxWithErrorFrameCount | read-only | mandatory | RX exceed max with error frame count |
| 1.3.6.1.4.1.2281.10.6.3.11.1.44 | ColumngenEquipPmEthernetRmonStatisticsRxJabberFrameCount | read-only | mandatory | RX jabber frame count - frames with length > 1518 bytes (1522 bytes for VLAN tagged frames) with errors |
| 1.3.6.1.4.1.2281.10.6.3.12 | TablegenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTable | not-accessible | mandatory | Service queues aggragation statistics. |
| 1.3.6.1.4.1.2281.10.6.3.12.1 | RowgenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsEntry | not-accessible | mandatory | Service queues aggragation statistics. |
| 1.3.6.1.4.1.2281.10.6.3.12.1.1 | ColumngenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsIfIndex | read-only | mandatory | ifIndex |
| 1.3.6.1.4.1.2281.10.6.3.12.1.2 | ColumngenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsServiceIndex | read-only | mandatory | Egress service bundle ID |
| 1.3.6.1.4.1.2281.10.6.3.12.1.3 | ColumngenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsClearOnRead | read-write | mandatory | clear on read |
| 1.3.6.1.4.1.2281.10.6.3.12.1.4 | ColumngenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTransmittedGreenPacket | read-only | mandatory | transmitted green packet |
| 1.3.6.1.4.1.2281.10.6.3.12.1.5 | ColumngenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTransmittedGreenBytes | read-only | mandatory | transmitted green bytes |
| 1.3.6.1.4.1.2281.10.6.3.12.1.6 | ColumngenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTransmittedGreenBitsPerSecond | read-only | mandatory | transmitted green bits per second |
| 1.3.6.1.4.1.2281.10.6.3.12.1.7 | ColumngenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsDroppedGreenPacket | read-only | mandatory | dropped green packet |
| 1.3.6.1.4.1.2281.10.6.3.12.1.8 | ColumngenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsDroppedGreenBytes | read-only | mandatory | dropped green bytes |
| 1.3.6.1.4.1.2281.10.6.3.12.1.9 | ColumngenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTransmittedYellowPacket | read-only | mandatory | transmitted yellow packet |
| 1.3.6.1.4.1.2281.10.6.3.12.1.10 | ColumngenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTransmittedYellowBytes | read-only | mandatory | transmitted yellow bytes |
| 1.3.6.1.4.1.2281.10.6.3.12.1.11 | ColumngenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsTransmittedYellowBitsPerSecond | read-only | mandatory | transmitted yellow bits per second |
| 1.3.6.1.4.1.2281.10.6.3.12.1.12 | ColumngenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsDroppedYellowPacket | read-only | mandatory | Tdropped yellow packet |
| 1.3.6.1.4.1.2281.10.6.3.12.1.13 | ColumngenEquipServicesCETTmPmSpEgressQueuesAggragateStatisticsDroppedYellowBytes | read-only | mandatory | dropped yellow bytes |
| 1.3.6.1.4.1.2281.10.6.3.13 | TablegenEquipServicesCetSpPmCosIngressPolicerStatisticsTable | not-accessible | mandatory | Cos Service Point ingress Policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.13.1 | RowgenEquipServicesCetSpPmCosIngressPolicerStatisticsEntry | not-accessible | mandatory | Cos Service Point ingress Policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.13.1.1 | ColumngenEquipServicesCetSpPmCosIngressPolicerStatiServiceIndex | read-only | mandatory | service-index |
| 1.3.6.1.4.1.2281.10.6.3.13.1.2 | ColumngenEquipServicesCetSpPmCosIngressPolicerStatiSpIndex | read-only | mandatory | sp-index |
| 1.3.6.1.4.1.2281.10.6.3.13.1.3 | ColumngenEquipServicesCetSpPmCosIngressPolicerStatiCos | read-only | mandatory | cos index |
| 1.3.6.1.4.1.2281.10.6.3.13.1.4 | ColumngenEquipServicesCetSpPmCosIngressPolicerStatiClearOnRead | read-write | mandatory | Clear on read |
| 1.3.6.1.4.1.2281.10.6.3.13.1.5 | ColumngenEquipServicesCetSpPmCosIngressPolicerStatiGreenPacket | read-only | mandatory | green-packet |
| 1.3.6.1.4.1.2281.10.6.3.13.1.6 | ColumngenEquipServicesCetSpPmCosIngressPolicerStatiGreenBytes | read-only | mandatory | green-bytes |
| 1.3.6.1.4.1.2281.10.6.3.13.1.7 | ColumngenEquipServicesCetSpPmCosIngressPolicerStatiYellowPacket | read-only | mandatory | yellow-packet |
| 1.3.6.1.4.1.2281.10.6.3.13.1.8 | ColumngenEquipServicesCetSpPmCosIngressPolicerStatiYellowBytes | read-only | mandatory | yellow-bytes |
| 1.3.6.1.4.1.2281.10.6.3.13.1.9 | ColumngenEquipServicesCetSpPmCosIngressPolicerStatiRedPacket | read-only | mandatory | red-packet |
| 1.3.6.1.4.1.2281.10.6.3.13.1.10 | ColumngenEquipServicesCetSpPmCosIngressPolicerStatiRedBytes | read-only | mandatory | red-bytes |
| 1.3.6.1.4.1.2281.10.6.3.14 | TablegenEquipServicesCetSpPmIngressPolicerStatisticsTable | not-accessible | mandatory | Service Point ingress Policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.14.1 | RowgenEquipServicesCetSpPmIngressPolicerStatisticsEntry | not-accessible | mandatory | Service Point ingress Policer statistics. |
| 1.3.6.1.4.1.2281.10.6.3.14.1.1 | ColumngenEquipServicesCetSpPmIngressPolicerStatiServiceIndex | read-only | mandatory | service-index |
| 1.3.6.1.4.1.2281.10.6.3.14.1.2 | ColumngenEquipServicesCetSpPmIngressPolicerStatiSpIndex | read-only | mandatory | sp-index |
| 1.3.6.1.4.1.2281.10.6.3.14.1.3 | ColumngenEquipServicesCetSpPmIngressPolicerStatiClearOnRead | read-write | mandatory | Clear on read |
| 1.3.6.1.4.1.2281.10.6.3.14.1.4 | ColumngenEquipServicesCetSpPmIngressPolicerStatiGreenPacket | read-only | mandatory | green-packet |
| 1.3.6.1.4.1.2281.10.6.3.14.1.5 | ColumngenEquipServicesCetSpPmIngressPolicerStatiGreenBytes | read-only | mandatory | green-bytes |
| 1.3.6.1.4.1.2281.10.6.3.14.1.6 | ColumngenEquipServicesCetSpPmIngressPolicerStatiYellowPacket | read-only | mandatory | yellow-packet |
| 1.3.6.1.4.1.2281.10.6.3.14.1.7 | ColumngenEquipServicesCetSpPmIngressPolicerStatiYellowBytes | read-only | mandatory | yellow-bytes |
| 1.3.6.1.4.1.2281.10.6.3.14.1.8 | ColumngenEquipServicesCetSpPmIngressPolicerStatiRedPacket | read-only | mandatory | red-packet |
| 1.3.6.1.4.1.2281.10.6.3.14.1.9 | ColumngenEquipServicesCetSpPmIngressPolicerStatiRedBytes | read-only | mandatory | red-bytes |
| 1.3.6.1.4.1.2281.10.6.3.15 | TablegenEquipServicesCETTmPmSpEgressQueueStatisticsTable | not-accessible | mandatory | Service Point egress queue statistics. |
| 1.3.6.1.4.1.2281.10.6.3.15.1 | RowgenEquipServicesCETTmPmSpEgressQueueStatisticsEntry | not-accessible | mandatory | Service Point egress queue statistics. |
| 1.3.6.1.4.1.2281.10.6.3.15.1.1 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsIfIndex | read-only | mandatory | ifindex |
| 1.3.6.1.4.1.2281.10.6.3.15.1.2 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsServiceIndex | read-only | mandatory | Servic class ID |
| 1.3.6.1.4.1.2281.10.6.3.15.1.3 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsCosQueueIndex | read-only | mandatory | cos-queue-index |
| 1.3.6.1.4.1.2281.10.6.3.15.1.4 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsClearOnRead | read-write | mandatory | Clear on read |
| 1.3.6.1.4.1.2281.10.6.3.15.1.5 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsTransmittedGreenPacket | read-only | mandatory | transmitted-green-packet |
| 1.3.6.1.4.1.2281.10.6.3.15.1.6 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsTransmittedGreenBytes | read-only | mandatory | transmitted-green-bytes |
| 1.3.6.1.4.1.2281.10.6.3.15.1.7 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsTransmittedGreenBitsPerSecond | read-only | mandatory | transmitted-green-bits-per-second |
| 1.3.6.1.4.1.2281.10.6.3.15.1.8 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsDroppedGreenPacket | read-only | mandatory | dropped-green-packet |
| 1.3.6.1.4.1.2281.10.6.3.15.1.9 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsDroppedGreenBytes | read-only | mandatory | dropped-green-bytes |
| 1.3.6.1.4.1.2281.10.6.3.15.1.10 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsTransmittedYellowPacket | read-only | mandatory | transmitted-yellow-packet |
| 1.3.6.1.4.1.2281.10.6.3.15.1.11 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsTransmittedYellowBytes | read-only | mandatory | transmitted-yellow-bytes |
| 1.3.6.1.4.1.2281.10.6.3.15.1.12 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsTransmittedYellowBitsPerSecond | read-only | mandatory | transmitted-yellow-bits-per-second |
| 1.3.6.1.4.1.2281.10.6.3.15.1.13 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsDroppedYellowPacket | read-only | mandatory | dropped-yellow-packet |
| 1.3.6.1.4.1.2281.10.6.3.15.1.14 | ColumngenEquipServicesCETTmPmSpEgressQueueStatisticsDroppedYellowBytes | read-only | mandatory | dropped-yellow-bytes |
| 1.3.6.1.4.1.2281.10.6.3.16 | NodegenEquipPmUtilization | |||
| 1.3.6.1.4.1.2281.10.6.3.16.1 | NodegenEquipPmUtilizationCPU | |||
| 1.3.6.1.4.1.2281.10.6.3.16.1.1 | ScalargenEquipPmUtilizationCPUAdmin | read-write | mandatory | CPU utilization PM admin |
| 1.3.6.1.4.1.2281.10.6.3.16.1.2 | ScalargenEquipPmUtilizationCPUThreshold | read-write | mandatory | User defined threshold for CPU utilization PM. |
| 1.3.6.1.4.1.2281.10.6.3.16.1.3 | TablegenEquipPmUtilizationCPUTable | not-accessible | mandatory | The CPU Utilization PMs |
| 1.3.6.1.4.1.2281.10.6.3.16.1.3.1 | RowgenEquipPmUtilizationCPUEntry | not-accessible | mandatory | The CPU Utilization PMs |
| 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.1 | ColumngenEquipPmUtilizationCPUPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours |
| 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.2 | ColumngenEquipPmUtilizationCPUInterval | read-only | mandatory | The interval of the PM |
| 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.3 | ColumngenEquipPmUtilizationCPUPeakUtilization | read-only | mandatory | Peak CPU utilization of the current interval. |
| 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.4 | ColumngenEquipPmUtilizationCPUAverageUtilization | read-only | mandatory | Average CPU utilization of the current interval. |
| 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.5 | ColumngenEquipPmUtilizationCPUMinimumUtilization | read-only | mandatory | Minimal CPU utilization of the current interval. |
| 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.6 | ColumngenEquipPmUtilizationCPUExceedUtilization | read-only | mandatory | Number of seconds in the current interval when CPU utilization exceeded user defined threshold. |
| 1.3.6.1.4.1.2281.10.6.3.16.1.3.1.7 | ColumngenEquipPmUtilizationCPUIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.16.2 | NodegenEquipPmUtilizationMem | |||
| 1.3.6.1.4.1.2281.10.6.3.16.2.1 | ScalargenEquipPmUtilizationMemAdmin | read-write | mandatory | Memory utilization PM admin |
| 1.3.6.1.4.1.2281.10.6.3.16.2.2 | ScalargenEquipPmUtilizationMemThreshold | read-write | mandatory | Memory threshold for Ethernet port utilization PM. |
| 1.3.6.1.4.1.2281.10.6.3.16.2.3 | TablegenEquipPmUtilizationMemTable | not-accessible | mandatory | The Memory Utilization PMs |
| 1.3.6.1.4.1.2281.10.6.3.16.2.3.1 | RowgenEquipPmUtilizationMemEntry | not-accessible | mandatory | The Memory Utilization PMs |
| 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.1 | ColumngenEquipPmUtilizationMemPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours |
| 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.2 | ColumngenEquipPmUtilizationMemInterval | read-only | mandatory | The interval of the PM |
| 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.3 | ColumngenEquipPmUtilizationMemPeakUtilization | read-only | mandatory | Peak Memory utilization of the current interval. |
| 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.4 | ColumngenEquipPmUtilizationMemAverageUtilization | read-only | mandatory | Average Memory utilization of the current interval. |
| 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.5 | ColumngenEquipPmUtilizationMemMinimumUtilization | read-only | mandatory | Number of seconds in current interval when Memory utilization exceeded the user defined threshold. |
| 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.6 | ColumngenEquipPmUtilizationMemExceedUtilization | read-only | mandatory | Number of seconds in current interval when Memory utilization exceeded the user defined threshold. |
| 1.3.6.1.4.1.2281.10.6.3.16.2.3.1.7 | ColumngenEquipPmUtilizationMemIDF | read-only | mandatory | This value indicates if the IDF (Invalid Data Flag), was set. |
| 1.3.6.1.4.1.2281.10.6.3.17 | NodegenEquipPmEthernet | |||
| 1.3.6.1.4.1.2281.10.6.3.17.1 | TablegenEquipPmEthernetPortTable | not-accessible | mandatory | PM on Ethernet port counters. |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1 | RowgenEquipPmEthernetPortEntry | not-accessible | mandatory | PM on Ethernet port counters entry. |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.1 | ColumngenEquipPmEthernetPortPmType | read-only | mandatory | This value indicates the PM Type table to access, 15 min, current 15 min, 24 hours or current 24 hours |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.2 | ColumngenEquipPmEthernetPortPmInterval | read-only | mandatory | The number of the interval: 1-30 in case the interval is 24 hours or 1-96 in case the interval is 15 minutes |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.3 | ColumngenEquipPmEthernetPortRxAvgBcastPackets | read-only | mandatory | Average received broadcast packets |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.4 | ColumngenEquipPmEthernetPortRxPeakBcastPackets | read-only | mandatory | Peak received broadcast packets |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.5 | ColumngenEquipPmEthernetPortRxBytesLayer1ExcedThSecCnt | read-only | mandatory | Counter of seconds in interval when received bytes in Layer1 exceeded threshold |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.6 | ColumngenEquipPmEthernetPortRxAvgBytesLayer1 | read-only | mandatory | Average received bytes in Layer1 |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.7 | ColumngenEquipPmEthernetPortRxPeakBytesLayer1 | read-only | mandatory | Peak received bytes in Layer1 |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.8 | ColumngenEquipPmEthernetPortRxAvgBytesLayer2 | read-only | mandatory | Average received bytes in Layer2 |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.9 | ColumngenEquipPmEthernetPortRxPeakBytesLayer2 | read-only | mandatory | Peak received bytes in Layer2 |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.10 | ColumngenEquipPmEthernetPortRxAvgMcastPackets | read-only | mandatory | Average received multicast packets |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.11 | ColumngenEquipPmEthernetPortRxPeakMcastPackets | read-only | mandatory | Peak received multicast packets |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.12 | ColumngenEquipPmEthernetPortRxAvgPackets | read-only | mandatory | Average received packets |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.13 | ColumngenEquipPmEthernetPortRxPeakPackets | read-only | mandatory | Peak received packets |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.14 | ColumngenEquipPmEthernetPortTxAvgBcastPackets | read-only | mandatory | Average transmitted broadcast packets |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.15 | ColumngenEquipPmEthernetPortTxPeakBcastPackets | read-only | mandatory | Peak transmitted broadcast packets |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.16 | ColumngenEquipPmEthernetPortTxBytesLayer1ExcedThSecCnt | read-only | mandatory | Counter of seconds in interval when transmitted bytes in Layer1 exceeded threshold |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.17 | ColumngenEquipPmEthernetPortTxAvgBytesLayer1 | read-only | mandatory | Average transmitted bytes in Layer1 |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.18 | ColumngenEquipPmEthernetPortTxPeakBytesLayer1 | read-only | mandatory | Peak transmitted bytes in Layer1 |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.19 | ColumngenEquipPmEthernetPortTxAvgBytesLayer2 | read-only | mandatory | Average transmitted bytes in Layer2 |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.20 | ColumngenEquipPmEthernetPortTxPeakBytesLayer2 | read-only | mandatory | Peak transmitted bytes in Layer2 |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.21 | ColumngenEquipPmEthernetPortTxAvgMcastPackets | read-only | mandatory | Average transmitted multicast packets |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.22 | ColumngenEquipPmEthernetPortTxPeakMcastPackets | read-only | mandatory | Peak transmitted multicast packets |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.23 | ColumngenEquipPmEthernetPortTxAvgPackets | read-only | mandatory | Average transmitted packets |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.24 | ColumngenEquipPmEthernetPortTxPeakPackets | read-only | mandatory | Peak transmitted packets |
| 1.3.6.1.4.1.2281.10.6.3.17.1.1.25 | ColumngenEquipPmEthernetPortPmIDF | read-only | mandatory | Indicates if the performance values of the interval can be trusted |
| 1.3.6.1.4.1.2281.10.6.4 | NodegenEquipPMStatistics | |||
| 1.3.6.1.4.1.2281.10.6.4.1 | ScalargenEquipRMONResetCounters | read-write | mandatory | Clear all Ethernet RMON counters. |
| 1.3.6.1.4.1.2281.10.6.4.2 | ScalargenEquipPMStatisticsResetAllL2PortPm | read-write | mandatory | Clear all L2 port PMs. |