NETGEAR-RADLAN-OSPFV3-LSDB-MIB
124 objects
The private MIB module definition for OSPF LSA Database MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.17.222 | IdentityrlOspfv3Lsdb | The private MIB module definition for OSPF LSA Database MIB. | ||
| 1.3.6.1.4.1.4526.17.222.1 | TablerlOspfv3RouterLsaTable | not-accessible | current | Router Link State Advertisement. |
| 1.3.6.1.4.1.4526.17.222.1.1 | RowrlOspfv3RouterLsaEntry | not-accessible | current | A single entry from Router LSA. |
| 1.3.6.1.4.1.4526.17.222.1.1.1 | ColumnrlOspfv3RouterLsaProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPFv3 process. |
| 1.3.6.1.4.1.4526.17.222.1.1.2 | ColumnrlOspfv3RouterLsaAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.4526.17.222.1.1.3 | ColumnrlOspfv3RouterLsaLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.4526.17.222.1.1.4 | ColumnrlOspfv3RouterLsaRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4526.17.222.1.1.5 | ColumnrlOspfv3RouterLsaIdx | read-only | current | The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimit… |
| 1.3.6.1.4.1.4526.17.222.1.1.6 | ColumnrlOspfv3RouterLsaCount | read-only | current | Number of entries containg is the LSA. |
| 1.3.6.1.4.1.4526.17.222.1.1.7 | ColumnrlOspfv3RouterLsaSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.4526.17.222.1.1.8 | ColumnrlOspfv3RouterLsaAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.4526.17.222.1.1.9 | ColumnrlOspfv3RouterLsaChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4526.17.222.1.1.10 | ColumnrlOspfv3RouterLsaLength | read-only | current | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| 1.3.6.1.4.1.4526.17.222.1.1.11 | ColumnrlOspfv3RouterLsaBitW | read-only | current | When set, the router is a wild-card multicast receiver. When running MOSPF, these routers receive all multicast datagrams, regardless of destination. |
| 1.3.6.1.4.1.4526.17.222.1.1.12 | ColumnrlOspfv3RouterLsaBitV | read-only | current | When set, the router is an endpoint of one or more fully adjacent virtual links having the described area as Transit area (V is for virtual link endpoint). |
| 1.3.6.1.4.1.4526.17.222.1.1.13 | ColumnrlOspfv3RouterLsaBitE | read-only | current | When set, the router is an AS boundary router (E is for external). |
| 1.3.6.1.4.1.4526.17.222.1.1.14 | ColumnrlOspfv3RouterLsaBitB | read-only | current | When set, the router is an area border router (B is for border). |
| 1.3.6.1.4.1.4526.17.222.1.1.15 | ColumnrlOspfv3RouterLsaOptions | read-only | current | The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain. |
| 1.3.6.1.4.1.4526.17.222.1.1.16 | ColumnrlOspfv3RouterLsaType | read-only | current | A quick description of the router link. |
| 1.3.6.1.4.1.4526.17.222.1.1.17 | ColumnrlOspfv3RouterLsaMetric | read-only | current | The cost of using this router link. |
| 1.3.6.1.4.1.4526.17.222.1.1.18 | ColumnrlOspfv3RouterLsaInterfaceID | read-only | current | The Interface ID assigned to the interface being described. |
| 1.3.6.1.4.1.4526.17.222.1.1.19 | ColumnrlOspfv3RouterLsaNeighborInterfaceID | read-only | current | The Interface ID the neighbor router (or the attached link's Designated Router, for Type 2 interfaces) has been advertising in hello packets sent on the attach… |
| 1.3.6.1.4.1.4526.17.222.1.1.20 | ColumnrlOspfv3RouterLsaNeighborRouterID | read-only | current | The Router ID the neighbor router (or the attached link's Designated Router, for Type 2 interfaces). |
| 1.3.6.1.4.1.4526.17.222.2 | TablerlOspfv3NetworkLsaTable | not-accessible | current | Network Link State Advertisement. |
| 1.3.6.1.4.1.4526.17.222.2.1 | RowrlOspfv3NetworkLsaEntry | not-accessible | current | A single entry from Network LSA. |
| 1.3.6.1.4.1.4526.17.222.2.1.1 | ColumnrlOspfv3NetworkLsaProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPFv3 process. |
| 1.3.6.1.4.1.4526.17.222.2.1.2 | ColumnrlOspfv3NetworkLsaAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.4526.17.222.2.1.3 | ColumnrlOspfv3NetworkLsaLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.4526.17.222.2.1.4 | ColumnrlOspfv3NetworkLsaRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4526.17.222.2.1.5 | ColumnrlOspfv3NetworkLsaIdx | read-only | current | The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimit… |
| 1.3.6.1.4.1.4526.17.222.2.1.6 | ColumnrlOspfv3NetworkLsaCount | read-only | current | Number of entries containg is the LSA. |
| 1.3.6.1.4.1.4526.17.222.2.1.7 | ColumnrlOspfv3NetworkLsaSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.4526.17.222.2.1.8 | ColumnrlOspfv3NetworkLsaAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.4526.17.222.2.1.9 | ColumnrlOspfv3NetworkLsaChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4526.17.222.2.1.10 | ColumnrlOspfv3NetworkLsaLength | read-only | current | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| 1.3.6.1.4.1.4526.17.222.2.1.11 | ColumnrlOspfv3NetworkLsaOptions | read-only | current | The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain. |
| 1.3.6.1.4.1.4526.17.222.2.1.12 | ColumnrlOspfv3NetworkLsaAttRouter | read-only | current | The Router IDs of each of the routers attached to the link. |
| 1.3.6.1.4.1.4526.17.222.3 | TablerlOspfv3InterAreaPrefixLsaTable | not-accessible | current | Inter Area Prefix Link State Advertisement. |
| 1.3.6.1.4.1.4526.17.222.3.1 | RowrlOspfv3InterAreaPrefixLsaEntry | not-accessible | current | A single entry from Network LSA. |
| 1.3.6.1.4.1.4526.17.222.3.1.1 | ColumnrlOspfv3InterAreaPrefixLsaProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPFv3 process. |
| 1.3.6.1.4.1.4526.17.222.3.1.2 | ColumnrlOspfv3InterAreaPrefixLsaAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.4526.17.222.3.1.3 | ColumnrlOspfv3InterAreaPrefixLsaLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.4526.17.222.3.1.4 | ColumnrlOspfv3InterAreaPrefixLsaRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4526.17.222.3.1.5 | ColumnrlOspfv3InterAreaPrefixLsaSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.4526.17.222.3.1.6 | ColumnrlOspfv3InterAreaPrefixLsaAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.4526.17.222.3.1.7 | ColumnrlOspfv3InterAreaPrefixLsaChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4526.17.222.3.1.8 | ColumnrlOspfv3InterAreaPrefixLsaLength | read-only | current | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| 1.3.6.1.4.1.4526.17.222.3.1.9 | ColumnrlOspfv3InterAreaPrefixLsaMetric | read-only | current | The cost of this route. Expressed in the same units as the interface costs in the router-LSAs. |
| 1.3.6.1.4.1.4526.17.222.3.1.10 | ColumnrlOspfv3InterAreaPrefixLsaPrefixLength | read-only | current | IPv6 address prefix length. |
| 1.3.6.1.4.1.4526.17.222.3.1.11 | ColumnrlOspfv3InterAreaPrefixLsaPrefixOptions | read-only | current | IPv6 address prefix options. |
| 1.3.6.1.4.1.4526.17.222.3.1.12 | ColumnrlOspfv3InterAreaPrefixLsaAddressPrefix | read-only | current | IPv6 address prefix - bit strings of length 128. |
| 1.3.6.1.4.1.4526.17.222.4 | TablerlOspfv3InterAreaRouterLsaTable | not-accessible | current | Inter Area Router Link State Advertisement. |
| 1.3.6.1.4.1.4526.17.222.4.1 | RowrlOspfv3InterAreaRouterLsaEntry | not-accessible | current | A single entry from Network LSA. |
| 1.3.6.1.4.1.4526.17.222.4.1.1 | ColumnrlOspfv3InterAreaRouterLsaProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPFv3 process. |
| 1.3.6.1.4.1.4526.17.222.4.1.2 | ColumnrlOspfv3InterAreaRouterLsaAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.4526.17.222.4.1.3 | ColumnrlOspfv3InterAreaRouterLsaLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.4526.17.222.4.1.4 | ColumnrlOspfv3InterAreaRouterLsaRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4526.17.222.4.1.5 | ColumnrlOspfv3InterAreaRouterLsaSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.4526.17.222.4.1.6 | ColumnrlOspfv3InterAreaRouterLsaAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.4526.17.222.4.1.7 | ColumnrlOspfv3InterAreaRouterLsaChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4526.17.222.4.1.8 | ColumnrlOspfv3InterAreaRouterLsaLength | read-only | current | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| 1.3.6.1.4.1.4526.17.222.4.1.9 | ColumnrlOspfv3InterAreaRouterLsaOptions | read-only | current | The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain. |
| 1.3.6.1.4.1.4526.17.222.4.1.10 | ColumnrlOspfv3InterAreaRouterLsaMetric | read-only | current | The cost of this route. Expressed in the same units as the interface costs in the router-LSAs. |
| 1.3.6.1.4.1.4526.17.222.4.1.11 | ColumnrlOspfv3InterAreaRouterLsaDestinationRouterId | read-only | current | The Router ID of the router being described by the LSA. |
| 1.3.6.1.4.1.4526.17.222.5 | TablerlOspfv3AsExternalLsaTable | not-accessible | current | AS External Link State Advertisement. |
| 1.3.6.1.4.1.4526.17.222.5.1 | RowrlOspfv3AsExternalLsaEntry | not-accessible | current | A single entry from Router LSA. |
| 1.3.6.1.4.1.4526.17.222.5.1.1 | ColumnrlOspfv3AsExternalLsaProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPFv3 process. |
| 1.3.6.1.4.1.4526.17.222.5.1.2 | ColumnrlOspfv3AsExternalLsaAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.4526.17.222.5.1.3 | ColumnrlOspfv3AsExternalLsaLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.4526.17.222.5.1.4 | ColumnrlOspfv3AsExternalLsaRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4526.17.222.5.1.5 | ColumnrlOspfv3AsExternalLsaSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.4526.17.222.5.1.6 | ColumnrlOspfv3AsExternalLsaAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.4526.17.222.5.1.7 | ColumnrlOspfv3AsExternalLsaChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4526.17.222.5.1.8 | ColumnrlOspfv3AsExternalLsaLength | read-only | current | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| 1.3.6.1.4.1.4526.17.222.5.1.9 | ColumnrlOspfv3AsExternalLsaBitE | read-only | current | The type of external metric. If bit E is set, the metric specified is a Type 2 external metric. |
| 1.3.6.1.4.1.4526.17.222.5.1.10 | ColumnrlOspfv3AsExternalLsaBitF | read-only | current | If set, a Forwarding Address has been included in the LSA. |
| 1.3.6.1.4.1.4526.17.222.5.1.11 | ColumnrlOspfv3AsExternalLsaBitT | read-only | current | If set, an External Route Tag has been included in the LSA. |
| 1.3.6.1.4.1.4526.17.222.5.1.12 | ColumnrlOspfv3AsExternalLsaMetric | read-only | current | The cost of this route. Interpretation depends on the external type indication (bit E above). |
| 1.3.6.1.4.1.4526.17.222.5.1.13 | ColumnrlOspfv3AsExternalLsaReferencedLsType | read-only | current | If non-zero, an LSA with this LS type is to be associated with this LSA (see Referenced Link State ID below). |
| 1.3.6.1.4.1.4526.17.222.5.1.14 | ColumnrlOspfv3AsExternalLsaPrefixLength | read-only | current | IPv6 address prefix length. |
| 1.3.6.1.4.1.4526.17.222.5.1.15 | ColumnrlOspfv3AsExternalLsaPrefixOptions | read-only | current | IPv6 address prefix options. |
| 1.3.6.1.4.1.4526.17.222.5.1.16 | ColumnrlOspfv3AsExternalLsaAddressPrefix | read-only | current | IPv6 address prefix - bit strings of length 128. |
| 1.3.6.1.4.1.4526.17.222.5.1.17 | ColumnrlOspfv3AsExternalLsaForwardingAddress | read-only | current | A fully qualified IPv6 address (128 bits). Included in the LSA if and only if bit F has been set. |
| 1.3.6.1.4.1.4526.17.222.5.1.18 | ColumnrlOspfv3AsExternalLsaExternalRouteTag | read-only | current | A 32-bit field which may be used to communicate additional information between AS boundary routers. |
| 1.3.6.1.4.1.4526.17.222.5.1.19 | ColumnrlOspfv3AsExternalLsaReferencedLinkStateId | read-only | current | Included if and only if Reference LS Type is non-zero. |
| 1.3.6.1.4.1.4526.17.222.6 | TablerlOspfv3LinkLsaTable | not-accessible | current | Link (Type 8) Link State Advertisement. |
| 1.3.6.1.4.1.4526.17.222.6.1 | RowrlOspfv3LinkLsaEntry | not-accessible | current | A single entry from Network LSA. |
| 1.3.6.1.4.1.4526.17.222.6.1.1 | ColumnrlOspfv3LinkLsaProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPFv3 process. |
| 1.3.6.1.4.1.4526.17.222.6.1.2 | ColumnrlOspfv3LinkLsaIfIndex | not-accessible | current | The identifier of the link from which the LSA was received. |
| 1.3.6.1.4.1.4526.17.222.6.1.3 | ColumnrlOspfv3LinkLsaIfInstId | not-accessible | current | OSPFv3 protocol instance ID specified in the OSPF header of the packet in which this LSA was received. |
| 1.3.6.1.4.1.4526.17.222.6.1.4 | ColumnrlOspfv3LinkLsaLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.4526.17.222.6.1.5 | ColumnrlOspfv3LinkLsaRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4526.17.222.6.1.6 | ColumnrlOspfv3LinkLsaIdx | read-only | current | The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimit… |
| 1.3.6.1.4.1.4526.17.222.6.1.7 | ColumnrlOspfv3LinkLsaCount | read-only | current | Number of entries containg is the LSA. |
| 1.3.6.1.4.1.4526.17.222.6.1.8 | ColumnrlOspfv3LinkLsaSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.4526.17.222.6.1.9 | ColumnrlOspfv3LinkLsaAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.4526.17.222.6.1.10 | ColumnrlOspfv3LinkLsaChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4526.17.222.6.1.11 | ColumnrlOspfv3LinkLsaLength | read-only | current | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| 1.3.6.1.4.1.4526.17.222.6.1.12 | ColumnrlOspfv3LinkLsaRtrPri | read-only | current | The Router Priority of the interface attaching the originating router to the link. |
| 1.3.6.1.4.1.4526.17.222.6.1.13 | ColumnrlOspfv3LinkLsaOptions | read-only | current | The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain. |
| 1.3.6.1.4.1.4526.17.222.6.1.14 | ColumnrlOspfv3LinkLsaLinkLocalInterfaceAddress | read-only | current | Link Local Interface Address. The originating router's link-local interface address on the link. |
| 1.3.6.1.4.1.4526.17.222.6.1.15 | ColumnrlOspfv3LinkLsaPrefixLength | read-only | current | IPv6 address prefix length. |
| 1.3.6.1.4.1.4526.17.222.6.1.16 | ColumnrlOspfv3LinkLsaPrefixOptions | read-only | current | IPv6 address prefix options. |
| 1.3.6.1.4.1.4526.17.222.6.1.17 | ColumnrlOspfv3LinkLsaAddressPrefix | read-only | current | IPv6 address prefix - bit strings of length 128. |
| 1.3.6.1.4.1.4526.17.222.7 | TablerlOspfv3IntraAreaPrefixLsaTable | not-accessible | current | Intra Area Prefix Link State Advertisement. |
| 1.3.6.1.4.1.4526.17.222.7.1 | RowrlOspfv3IntraAreaPrefixLsaEntry | not-accessible | current | A single entry from Network LSA. |
| 1.3.6.1.4.1.4526.17.222.7.1.1 | ColumnrlOspfv3IntraAreaPrefixLsaProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPFv3 process. |
| 1.3.6.1.4.1.4526.17.222.7.1.2 | ColumnrlOspfv3IntraAreaPrefixLsaAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.4526.17.222.7.1.3 | ColumnrlOspfv3IntraAreaPrefixLsaLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.4526.17.222.7.1.4 | ColumnrlOspfv3IntraAreaPrefixLsaRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4526.17.222.7.1.5 | ColumnrlOspfv3IntraAreaPrefixLsaIdx | read-only | current | The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimit… |
| 1.3.6.1.4.1.4526.17.222.7.1.6 | ColumnrlOspfv3IntraAreaPrefixLsaCount | read-only | current | Number of entries containg is the LSA. |
| 1.3.6.1.4.1.4526.17.222.7.1.7 | ColumnrlOspfv3IntraAreaPrefixLsaSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.4526.17.222.7.1.8 | ColumnrlOspfv3IntraAreaPrefixLsaAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.4526.17.222.7.1.9 | ColumnrlOspfv3IntraAreaPrefixLsaChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4526.17.222.7.1.10 | ColumnrlOspfv3IntraAreaPrefixLsaLength | read-only | current | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| 1.3.6.1.4.1.4526.17.222.7.1.11 | ColumnrlOspfv3IntraAreaPrefixLsaNumPrefixes | read-only | current | Number of IPv6 address prefixes contained in the LSA. |
| 1.3.6.1.4.1.4526.17.222.7.1.12 | ColumnrlOspfv3IntraAreaPrefixLsaReferenceLsType | read-only | current | Referenced LS Type: If the Referenced LS type is 1, the prefixes are associated with a router-LSA. If Referenced LS type is 2, the prefixes are associated with… |
| 1.3.6.1.4.1.4526.17.222.7.1.13 | ColumnrlOspfv3IntraAreaPrefixLsaReferenceLsId | read-only | current | Referenced Link State ID: If the prefixes are associated with a router-LSA, the Referenced Link State ID should be 0. If the prefixes are associated with a net… |
| 1.3.6.1.4.1.4526.17.222.7.1.14 | ColumnrlOspfv3IntraAreaPrefixLsaReferenceAdvRouter | read-only | current | Referenced Advertising Router: If the prefixes are associated with a router-LSA, the Referenced Advertising Router should be the originating router's Router ID… |
| 1.3.6.1.4.1.4526.17.222.7.1.15 | ColumnrlOspfv3IntraAreaPrefixLsaMetric | read-only | current | The cost of this route. Expressed in the same units as the interface costs in the router-LSAs. |
| 1.3.6.1.4.1.4526.17.222.7.1.16 | ColumnrlOspfv3IntraAreaPrefixLsaPrefixLength | read-only | current | IPv6 address prefix length. |
| 1.3.6.1.4.1.4526.17.222.7.1.17 | ColumnrlOspfv3IntraAreaPrefixLsaPrefixOptions | read-only | current | IPv6 address prefix options. |
| 1.3.6.1.4.1.4526.17.222.7.1.18 | ColumnrlOspfv3IntraAreaPrefixLsaAddressPrefix | read-only | current | IPv6 address prefix - bit strings of length 128. |