NETGEAR-RADLAN-OSPFV3-MIB
264 objects
The private MIB module definition for Multi Instance OSPF V3 for IPv6 MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.17.216 | IdentityrlOspfv3 | The private MIB module definition for Multi Instance OSPF V3 for IPv6 MIB. | ||
| 1.3.6.1.4.1.4526.17.216.1 | ScalarrlOspfv3Instance | read-write | current | Selected OSPFv3 Process ID. Additional key value for old fashion usage of OSPF standard MIB to support multi OSPF instance. |
| 1.3.6.1.4.1.4526.17.216.2 | TablerlOspfv3GeneralGroupTable | not-accessible | current | OSPFv3 Instance General Variables |
| 1.3.6.1.4.1.4526.17.216.2.1 | RowrlOspfv3GeneralGroupEntry | not-accessible | current | Information describing the configured global parame- ters to the Router OSPFv3 Process. |
| 1.3.6.1.4.1.4526.17.216.2.1.1 | ColumnrlOspfv3ProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPFv3 process. |
| 1.3.6.1.4.1.4526.17.216.2.1.2 | ColumnrlOspfv3RouterId | read-write | current | A 32-bit unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the 32-bit unsigned integer repre… |
| 1.3.6.1.4.1.4526.17.216.2.1.3 | ColumnrlOspfv3AdminStatus | read-write | current | The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one interface; 'disabled' disables… |
| 1.3.6.1.4.1.4526.17.216.2.1.4 | ColumnrlOspfv3VersionNumber | read-only | current | The version number of OSPF for IPv6 is 3. |
| 1.3.6.1.4.1.4526.17.216.2.1.5 | ColumnrlOspfv3AreaBdrRtrStatus | read-only | current | A flag to denote whether this router is an area border router. The value of this object is true (1) when the router is an area border router. |
| 1.3.6.1.4.1.4526.17.216.2.1.6 | ColumnrlOspfv3ASBdrRtrStatus | read-write | current | A flag to note whether this router is configured as an Autonomous System border router. This object is persistent, and when written, the entity SHOULD save the… |
| 1.3.6.1.4.1.4526.17.216.2.1.7 | ColumnrlOspfv3AsScopeLsaCount | read-only | current | The number of AS-scope (e.g., AS-External) link state advertisements in the link state database. |
| 1.3.6.1.4.1.4526.17.216.2.1.8 | ColumnrlOspfv3AsScopeLsaCksumSum | read-only | current | The 32-bit unsigned sum of the LS checksums of the AS-scoped link state advertisements contained in the link state database. This sum can be used to determine … |
| 1.3.6.1.4.1.4526.17.216.2.1.9 | ColumnrlOspfv3OriginateNewLsas | read-only | current | The number of new link state advertisements that have been originated. This number is incremented each time the router originates a new LSA. Discontinuities in… |
| 1.3.6.1.4.1.4526.17.216.2.1.10 | ColumnrlOspfv3RxNewLsas | read-only | current | The number of link state advertisements received that are determined to be new instantiations. This number does not include newer instantiations of self-origin… |
| 1.3.6.1.4.1.4526.17.216.2.1.11 | ColumnrlOspfv3ExtLsaCount | read-only | current | The number of External (LS type 0x4005) in the link state database. |
| 1.3.6.1.4.1.4526.17.216.2.1.12 | ColumnrlOspfv3ExtAreaLsdbLimit | read-write | current | The maximum number of non-default AS-external-LSA entries that can be stored in the link state database. If the value is -1, then there is no limit. When the n… |
| 1.3.6.1.4.1.4526.17.216.2.1.13 | ColumnrlOspfv3ExitOverflowInterval | read-write | current | The number of seconds that, after entering Overflow state, a router will attempt to leave Overflow state. This allows the router to again originate non-default… |
| 1.3.6.1.4.1.4526.17.216.2.1.14 | ColumnrlOspfv3DemandExtensions | read-write | current | The router's support for demand circuits. The value of this object is true (1) when demand circuits are supported. This object is persistent, and when written,… |
| 1.3.6.1.4.1.4526.17.216.2.1.15 | ColumnrlOspfv3ReferenceBandwidth | read-write | current | Reference bandwidth in kilobits per second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS). This object is persistent, … |
| 1.3.6.1.4.1.4526.17.216.2.1.16 | ColumnrlOspfv3RestartSupport | read-write | current | The router's support for OSPF graceful restart. Options include no restart support, only planned restarts, or both planned and unplanned restarts. This object … |
| 1.3.6.1.4.1.4526.17.216.2.1.17 | ColumnrlOspfv3RestartInterval | read-write | current | Configured OSPF graceful restart timeout interval. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage. |
| 1.3.6.1.4.1.4526.17.216.2.1.18 | ColumnrlOspfv3RestartStrictLsaChecking | read-write | current | Indicates if strict LSA checking is enabled for graceful restart. A value of true (1) indicates that strict LSA checking is enabled. This object is persistent,… |
| 1.3.6.1.4.1.4526.17.216.2.1.19 | ColumnrlOspfv3RestartStatus | read-only | current | The current status of OSPF graceful restart capability. |
| 1.3.6.1.4.1.4526.17.216.2.1.20 | ColumnrlOspfv3RestartAge | read-only | current | Remaining time in the current OSPF graceful restart interval. |
| 1.3.6.1.4.1.4526.17.216.2.1.21 | ColumnrlOspfv3RestartExitReason | read-only | current | Describes the outcome of the last attempt at a graceful restart. none: no restart has yet been attempted. inProgress: a restart attempt is currently underway. … |
| 1.3.6.1.4.1.4526.17.216.2.1.22 | ColumnrlOspfv3NotificationEnable | read-write | current | This object provides a coarse level of control over the generation of OSPFv3 notifications. If this object is set to true (1), then it enables the generation o… |
| 1.3.6.1.4.1.4526.17.216.2.1.23 | ColumnrlOspfv3StubRouterSupport | read-only | current | The router's support for stub router functionality. An object value of true (1) indicates that stub router functionality is supported. |
| 1.3.6.1.4.1.4526.17.216.2.1.24 | ColumnrlOspfv3StubRouterAdvertisement | read-write | current | This object controls the advertisement of stub LSAs by the router. The value doNotAdvertise (1) will result in the advertisement of standard LSAs and is the de… |
| 1.3.6.1.4.1.4526.17.216.2.1.25 | ColumnrlOspfv3DiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one of this MIB's counters suffered a discontinuity. If no such discontinuities have occurred s… |
| 1.3.6.1.4.1.4526.17.216.2.1.26 | ColumnrlOspfv3RestartTime | read-only | current | The value of sysUpTime on the most recent occasion at which the ospfv3RestartExitReason was updated. |
| 1.3.6.1.4.1.4526.17.216.2.1.27 | ColumnrlOspfv3OperStatus | read-only | current | The current operational state of the OSPF in the router. |
| 1.3.6.1.4.1.4526.17.216.2.1.28 | ColumnrlOspfv3RowStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.4526.17.216.2.1.29 | ColumnrlOspfv3LogAdjacencyChanges | read-write | current | Configure the router to send a syslog message when an OSPF neighbor goes up or down. detail � sends a syslog message for each state change, not just when a n… |
| 1.3.6.1.4.1.4526.17.216.2.1.30 | ColumnrlOspfv3PassiveInterface | read-write | current | A flag to note whether to disable sending OSPF routing updates on all OSPF IP interfaces. |
| 1.3.6.1.4.1.4526.17.216.2.1.31 | ColumnrlOspfv3DefaultMetric | read-write | current | A default metric helps solve the problem of redistributing routes with incompatible metrics. Whenever metrics do not convert, using a default metric provides a… |
| 1.3.6.1.4.1.4526.17.216.2.1.32 | ColumnrlOspfv3MaximumRedistPrefixNum | read-write | current | Specifies the maximum number of IP prefixes that can be redistributed into OSPF. |
| 1.3.6.1.4.1.4526.17.216.2.1.33 | ColumnrlOspfv3MaximumRedistPrefixThreshold | read-write | current | Threshold value, as a percentage, at which a warning message should be generated. |
| 1.3.6.1.4.1.4526.17.216.2.1.34 | ColumnrlOspfv3MaximumRedistPrefixWarningOnly | read-write | current | Causes a warning message to be logged when the number of prefixes defined by the maximum argumenthas been exceeded. Additional redistribution is not prevented. |
| 1.3.6.1.4.1.4526.17.216.2.1.35 | ColumnrlOspfv3NextRouterId | read-only | current | A 32-bit integer uniquely identifying the of router in the Autonomous System after restart. By convention, to ensure uniqueness, this should default to the val… |
| 1.3.6.1.4.1.4526.17.216.2.1.36 | ColumnrlOspfv3RouterIdType | read-only | current | Type of router identifier - default value or manually set by user. |
| 1.3.6.1.4.1.4526.17.216.2.1.37 | ColumnrlOspfv3NextRouterIdType | read-only | current | Type of router identifier after restart - default value or manually set by user. |
| 1.3.6.1.4.1.4526.17.216.2.1.38 | ColumnrlOspfv3ASBdrRtrActualStatus | read-only | current | A flag to note whether this router is an Autonomous System Border Router. note: rlOspfASBdrRtrStatus field is the configuration and this filed is the actual AS… |
| 1.3.6.1.4.1.4526.17.216.2.1.39 | ColumnrlOspfv3CalcMaxDelay | read-write | current | The maximum delay before the Routing Table is recalculated following a change to the Link State Database. (Recalculation is delayed to reduce the frequency of … |
| 1.3.6.1.4.1.4526.17.216.2.1.40 | ColumnrlOspfv3RteMaxEqCostPaths | read-write | current | The maximum number of equal cost paths that are stored for each destination in the Routing Table. |
| 1.3.6.1.4.1.4526.17.216.3 | TablerlOspfv3AreaTable | not-accessible | current | Information describing the configured parameters and cumulative statistics of the router's attached areas. The interfaces and virtual links are configured as p… |
| 1.3.6.1.4.1.4526.17.216.3.1 | RowrlOspfv3AreaEntry | not-accessible | current | Information describing the configured parameters and cumulative statistics of one of the router's attached areas. The information in this table is persistent, … |
| 1.3.6.1.4.1.4526.17.216.3.1.1 | ColumnrlOspfv3AreaProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPF process. |
| 1.3.6.1.4.1.4526.17.216.3.1.2 | ColumnrlOspfv3AreaId | not-accessible | current | A 32-bit unsigned integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone. |
| 1.3.6.1.4.1.4526.17.216.3.1.3 | ColumnrlOspfv3AreaImportAsExtern | read-create | current | Indicates whether an area is a stub area, NSSA, or standard area. AS-scope LSAs are not imported into stub areas or NSSAs. NSSAs import AS-External data as NSS… |
| 1.3.6.1.4.1.4526.17.216.3.1.4 | ColumnrlOspfv3AreaSpfRuns | read-only | current | The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.4.1.4526.17.216.3.1.5 | ColumnrlOspfv3AreaBdrRtrCount | read-only | current | The total number of area border routers reachable within this area. This is initially zero, and is calculated in each Shortest Path First (SPF) pass. |
| 1.3.6.1.4.1.4526.17.216.3.1.6 | ColumnrlOspfv3AreaAsBdrRtrCount | read-only | current | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF pass. |
| 1.3.6.1.4.1.4526.17.216.3.1.7 | ColumnrlOspfv3AreaScopeLsaCount | read-only | current | The total number of Area-scope link state advertisements in this area's link state database. |
| 1.3.6.1.4.1.4526.17.216.3.1.8 | ColumnrlOspfv3AreaScopeLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Area-scope link state advertisements' LS checksums contained in this area's link state database. The sum can be used to determin… |
| 1.3.6.1.4.1.4526.17.216.3.1.9 | ColumnrlOspfv3AreaSummary | read-create | current | The variable rlOspfv3AreaSummary controls the import of Inter-Area LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the … |
| 1.3.6.1.4.1.4526.17.216.3.1.10 | ColumnrlOspfv3AreaRowStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.4.1.4526.17.216.3.1.11 | ColumnrlOspfv3AreaStubMetric | read-create | current | The metric value advertised for the default route into stub and NSSA areas. By default, this equals the least metric among the interfaces to other areas. |
| 1.3.6.1.4.1.4526.17.216.3.1.12 | ColumnrlOspfv3AreaNssaTranslatorRole | read-create | current | Indicates an NSSA border router's policy to perform NSSA translation of NSSA-LSAs into AS-External-LSAs. |
| 1.3.6.1.4.1.4526.17.216.3.1.13 | ColumnrlOspfv3AreaNssaTranslatorState | read-only | current | Indicates if and how an NSSA border router is performing NSSA translation of NSSA-LSAs into AS-External-LSAs. When this object is set to 'enabled', the NSSA bo… |
| 1.3.6.1.4.1.4526.17.216.3.1.14 | ColumnrlOspfv3AreaNssaTranslatorStabInterval | read-create | current | The stability interval defined as the number of seconds after an elected translator determines its services are no longer required that it should continue to p… |
| 1.3.6.1.4.1.4526.17.216.3.1.15 | ColumnrlOspfv3AreaNssaTranslatorEvents | read-only | current | Indicates the number of Translator state changes that have occurred since the last start-up of the OSPFv3 routing process. Discontinuities in the value of this… |
| 1.3.6.1.4.1.4526.17.216.3.1.16 | ColumnrlOspfv3AreaStubMetricType | read-create | current | This variable assigns the type of metric advertised as a default route. |
| 1.3.6.1.4.1.4526.17.216.3.1.17 | ColumnrlOspfv3AreaTEEnabled | read-create | current | Indicates whether or not traffic engineering is enabled in the area. The object is set to the value true (1) to enable traffic engineering. Traffic engineering… |
| 1.3.6.1.4.1.4526.17.216.3.1.18 | ColumnrlOspfv3AreaAdminStat | read-create | current | The OSPF Area's administrative status. The value formed on the area, and the in- terfaces associated with the area. The value 'disabled' denotes that the area … |
| 1.3.6.1.4.1.4526.17.216.3.1.19 | ColumnrlOspfv3AreaOperStatus | read-only | current | The current operational state of the OSPF Area. |
| 1.3.6.1.4.1.4526.17.216.3.1.20 | ColumnrlOspfv3AreaFilterPrefixListIn | read-write | current | The prefix list is applied to prefixes advertised to the specified area from other areas. |
| 1.3.6.1.4.1.4526.17.216.3.1.21 | ColumnrlOspfv3AreaFilterPrefixListOut | read-write | current | The prefix list is applied to prefixes advertised out of the specified area to other areas. |
| 1.3.6.1.4.1.4526.17.216.4 | TablerlOspfv3AsLsdbTable | not-accessible | current | The OSPFv3 Process's AS-scope link state database (LSDB). The LSDB contains the AS-scope link state advertisements from throughout the areas that the device is… |
| 1.3.6.1.4.1.4526.17.216.4.1 | RowrlOspfv3AsLsdbEntry | not-accessible | current | A single AS-scope link state advertisement. |
| 1.3.6.1.4.1.4526.17.216.4.1.1 | ColumnrlOspfv3AsLsdbProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPF process. |
| 1.3.6.1.4.1.4526.17.216.4.1.2 | ColumnrlOspfv3AsLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. AS-scope LSAs not recognized by the router may be stored in… |
| 1.3.6.1.4.1.4526.17.216.4.1.3 | ColumnrlOspfv3AsLsdbRouterId | not-accessible | current | The 32-bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4526.17.216.4.1.4 | ColumnrlOspfv3AsLsdbLsid | not-accessible | current | The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.4526.17.216.4.1.5 | ColumnrlOspfv3AsLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.4526.17.216.4.1.6 | ColumnrlOspfv3AsLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-deman… |
| 1.3.6.1.4.1.4526.17.216.4.1.7 | ColumnrlOspfv3AsLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4526.17.216.4.1.8 | ColumnrlOspfv3AsLsdbAdvertisement | read-only | current | The entire link state advertisement, including its header. |
| 1.3.6.1.4.1.4526.17.216.4.1.9 | ColumnrlOspfv3AsLsdbTypeKnown | read-only | current | The value true (1) indicates that the LSA type is recognized by this router. |
| 1.3.6.1.4.1.4526.17.216.5 | TablerlOspfv3AreaLsdbTable | not-accessible | current | The OSPFv3 Process's Area-scope LSDB. The LSDB contains the Area-scope link state advertisements from throughout the area that the device is attached to. |
| 1.3.6.1.4.1.4526.17.216.5.1 | RowrlOspfv3AreaLsdbEntry | not-accessible | current | A single Area-scope link state advertisement. |
| 1.3.6.1.4.1.4526.17.216.5.1.1 | ColumnrlOspfv3AreaLsdbProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPF process. |
| 1.3.6.1.4.1.4526.17.216.5.1.2 | ColumnrlOspfv3AreaLsdbAreaId | not-accessible | current | The 32-bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.4526.17.216.5.1.3 | ColumnrlOspfv3AreaLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. Area-scope LSAs unrecognized by the router are also stored … |
| 1.3.6.1.4.1.4526.17.216.5.1.4 | ColumnrlOspfv3AreaLsdbRouterId | not-accessible | current | The 32-bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4526.17.216.5.1.5 | ColumnrlOspfv3AreaLsdbLsid | not-accessible | current | The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.4526.17.216.5.1.6 | ColumnrlOspfv3AreaLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.4526.17.216.5.1.7 | ColumnrlOspfv3AreaLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-deman… |
| 1.3.6.1.4.1.4526.17.216.5.1.8 | ColumnrlOspfv3AreaLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4526.17.216.5.1.9 | ColumnrlOspfv3AreaLsdbAdvertisement | read-only | current | The entire link state advertisement, including its header. |
| 1.3.6.1.4.1.4526.17.216.5.1.10 | ColumnrlOspfv3AreaLsdbTypeKnown | read-only | current | The value true (1) indicates that the LSA type is recognized by this router. |
| 1.3.6.1.4.1.4526.17.216.6 | TablerlOspfv3LinkLsdbTable | not-accessible | current | The OSPFv3 Process's Link-scope LSDB for non-virtual interfaces. The LSDB contains the Link-scope link state advertisements from the interfaces that the device… |
| 1.3.6.1.4.1.4526.17.216.6.1 | RowrlOspfv3LinkLsdbEntry | not-accessible | current | A single Link-scope link state advertisement. |
| 1.3.6.1.4.1.4526.17.216.6.1.1 | ColumnrlOspfv3LinkLsdbProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPF process. |
| 1.3.6.1.4.1.4526.17.216.6.1.2 | ColumnrlOspfv3LinkLsdbIfIndex | not-accessible | current | The identifier of the link from which the LSA was received. |
| 1.3.6.1.4.1.4526.17.216.6.1.3 | ColumnrlOspfv3LinkLsdbIfInstId | not-accessible | current | The identifier of the interface instance from which the LSA was received. |
| 1.3.6.1.4.1.4526.17.216.6.1.4 | ColumnrlOspfv3LinkLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. Link-scope LSAs unrecognized by the router are also stored … |
| 1.3.6.1.4.1.4526.17.216.6.1.5 | ColumnrlOspfv3LinkLsdbRouterId | not-accessible | current | The 32-bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4526.17.216.6.1.6 | ColumnrlOspfv3LinkLsdbLsid | not-accessible | current | The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.4526.17.216.6.1.7 | ColumnrlOspfv3LinkLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.4526.17.216.6.1.8 | ColumnrlOspfv3LinkLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-deman… |
| 1.3.6.1.4.1.4526.17.216.6.1.9 | ColumnrlOspfv3LinkLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4526.17.216.6.1.10 | ColumnrlOspfv3LinkLsdbAdvertisement | read-only | current | The entire link state advertisement, including its header. |
| 1.3.6.1.4.1.4526.17.216.6.1.11 | ColumnrlOspfv3LinkLsdbTypeKnown | read-only | current | The value true (1) indicates that the LSA type is recognized by this router. |
| 1.3.6.1.4.1.4526.17.216.7 | TablerlOspfv3HostTable | not-accessible | current | The Host/Metric Table indicates what hosts are directly attached to the router and their corresponding metrics. |
| 1.3.6.1.4.1.4526.17.216.7.1 | RowrlOspfv3HostEntry | not-accessible | current | A metric to be advertised when a given host is reachable. The information in this table is persistent, and when written, the entity SHOULD save the change to n… |
| 1.3.6.1.4.1.4526.17.216.7.1.1 | ColumnrlOspfv3HostProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPF process. |
| 1.3.6.1.4.1.4526.17.216.7.1.2 | ColumnrlOspfv3HostAddressType | not-accessible | current | The address type of rlOspfv3HostAddress. Only IPv6 global address type is expected. |
| 1.3.6.1.4.1.4526.17.216.7.1.3 | ColumnrlOspfv3HostAddress | not-accessible | current | The IPv6 address of the host. Must be an IPv6 global address. |
| 1.3.6.1.4.1.4526.17.216.7.1.4 | ColumnrlOspfv3HostMetric | read-create | current | The metric to be advertised. |
| 1.3.6.1.4.1.4526.17.216.7.1.5 | ColumnrlOspfv3HostRowStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.4.1.4526.17.216.7.1.6 | ColumnrlOspfv3HostAreaID | read-create | current | The Area the host entry is to be found within. By default, the area for the subsuming OSPFv3 interface, or Area 0 if there is no subsuming interface. |
| 1.3.6.1.4.1.4526.17.216.8 | TablerlOspfv3IfTable | not-accessible | current | The OSPFv3 Interface Table describes the interfaces from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.4526.17.216.8.1 | RowrlOspfv3IfEntry | not-accessible | current | The OSPFv3 Interface Entry describes one interface from the viewpoint of OSPFv3. The information in this table is persistent, and when written, the entity SHOU… |
| 1.3.6.1.4.1.4526.17.216.8.1.1 | ColumnrlOspfv3IfProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPF process. |
| 1.3.6.1.4.1.4526.17.216.8.1.2 | ColumnrlOspfv3IfIndex | not-accessible | current | The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured. |
| 1.3.6.1.4.1.4526.17.216.8.1.3 | ColumnrlOspfv3IfInstId | not-accessible | current | Enables multiple interface instances of OSPFv3 to be run over a single link. Each interface instance would be assigned a separate ID. This ID has local link si… |
| 1.3.6.1.4.1.4526.17.216.8.1.4 | ColumnrlOspfv3IfAreaId | read-create | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone. |
| 1.3.6.1.4.1.4526.17.216.8.1.5 | ColumnrlOspfv3IfType | read-create | current | The OSPFv3 interface type. |
| 1.3.6.1.4.1.4526.17.216.8.1.6 | ColumnrlOspfv3IfAdminStatus | read-create | current | The OSPFv3 interface's administrative status. The value formed on the interface; the interface will be advertised as an internal route to some area. The value … |
| 1.3.6.1.4.1.4526.17.216.8.1.7 | ColumnrlOspfv3IfRtrPriority | read-create | current | The priority of this interface. Used in multi-access networks, this field is used in the designated-router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.4526.17.216.8.1.8 | ColumnrlOspfv3IfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a Link State Update packet over this interface. LSAs contained in the update packet must have their age in… |
| 1.3.6.1.4.1.4526.17.216.8.1.9 | ColumnrlOspfv3IfRetransInterval | read-create | current | The number of seconds between link state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting… |
| 1.3.6.1.4.1.4526.17.216.8.1.10 | ColumnrlOspfv3IfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.4526.17.216.8.1.11 | ColumnrlOspfv3IfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multi… |
| 1.3.6.1.4.1.4526.17.216.8.1.12 | ColumnrlOspfv3IfPollInterval | read-create | current | The larger time interval, in seconds, between the Hello packets sent to an inactive, non-broadcast multi-access neighbor. |
| 1.3.6.1.4.1.4526.17.216.8.1.13 | ColumnrlOspfv3IfState | read-only | current | The OSPFv3 interface state. An interface may be in standby state if there are multiple interfaces on the link and another interface is active. The interface ma… |
| 1.3.6.1.4.1.4526.17.216.8.1.14 | ColumnrlOspfv3IfDesignatedRouter | read-only | current | The Router ID of the Designated Router. |
| 1.3.6.1.4.1.4526.17.216.8.1.15 | ColumnrlOspfv3IfBackupDesignatedRouter | read-only | current | The Router ID of the Backup Designated Router. |
| 1.3.6.1.4.1.4526.17.216.8.1.16 | ColumnrlOspfv3IfEvents | read-only | current | The number of times this OSPFv3 interface has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initiali… |
| 1.3.6.1.4.1.4526.17.216.8.1.17 | ColumnrlOspfv3IfRowStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.4.1.4526.17.216.8.1.18 | ColumnrlOspfv3IfDemand | read-create | current | Indicates whether Demand OSPFv3 procedures (Hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this i… |
| 1.3.6.1.4.1.4526.17.216.8.1.19 | ColumnrlOspfv3IfMetricValue | read-create | current | The metric assigned to this interface. The default value of the metric is 'Reference Bandwidth / ifSpeed'. The value of the reference bandwidth can be set in t… |
| 1.3.6.1.4.1.4526.17.216.8.1.20 | ColumnrlOspfv3IfLinkScopeLsaCount | read-only | current | The total number of Link-scope link state advertisements in this link's link state database. |
| 1.3.6.1.4.1.4526.17.216.8.1.21 | ColumnrlOspfv3IfLinkLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Link-scope link state advertisements' LS checksums contained in this link's link state database. The sum can be used to determin… |
| 1.3.6.1.4.1.4526.17.216.8.1.22 | ColumnrlOspfv3IfDemandNbrProbe | read-create | current | Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default. |
| 1.3.6.1.4.1.4526.17.216.8.1.23 | ColumnrlOspfv3IfDemandNbrProbeRetransLimit | read-create | current | The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down. |
| 1.3.6.1.4.1.4526.17.216.8.1.24 | ColumnrlOspfv3IfDemandNbrProbeInterval | read-create | current | Defines how often the neighbor will be probed. |
| 1.3.6.1.4.1.4526.17.216.8.1.25 | ColumnrlOspfv3IfTEDisabled | read-create | current | Indicates whether or not traffic engineering is disabled on the interface when traffic engineering is enabled in the area where the interface is attached. The … |
| 1.3.6.1.4.1.4526.17.216.8.1.26 | ColumnrlOspfv3IfLinkLSASuppression | read-create | current | Specifies whether or not link LSA origination is suppressed for broadcast or NBMA interface types. The object is set to value true (1) to suppress the originat… |
| 1.3.6.1.4.1.4526.17.216.8.1.27 | ColumnrlOspfv3IfOperStatus | read-only | current | The current operational state of the OSPF interface. |
| 1.3.6.1.4.1.4526.17.216.8.1.28 | ColumnrlOspfv3IfPassive | read-write | current | Indicates whether this interface is a passive interface. If set to TRUE, we suppress HELLO packets sent on and received from this interface. We will therefore … |
| 1.3.6.1.4.1.4526.17.216.8.1.29 | ColumnrlOspfv3IfLsaRefreshIntvl | read-write | current | Self-originated LSAs are periodically reflooded into the routing domain, to add to the robustness of the OSPF protocol. This value determines the interval betw… |
| 1.3.6.1.4.1.4526.17.216.8.1.30 | ColumnrlOspfv3IfFastHelloMultiplier | read-create | current | The number of Hellos that should be sent within 1 second when using Fast Hellos on this interface. This value does not have to be same for all routers attached… |
| 1.3.6.1.4.1.4526.17.216.8.1.31 | ColumnrlOspfv3IfMtuIgnore | read-write | current | This object controls whether DC-OSPF checks the MTU size on incoming Database Description packets. By default, if the received MTU size in a DB Description pac… |
| 1.3.6.1.4.1.4526.17.216.8.1.32 | ColumnrlOspfv3IfNameLookup | read-write | current | A flag to note whether to look up Domain Name System (DNS) names for use in all OSPF show EXEC command displays. |
| 1.3.6.1.4.1.4526.17.216.9 | TablerlOspfv3VirtIfTable | not-accessible | current | Information about this router's virtual interfaces that the OSPFv3 Process is configured to carry on. |
| 1.3.6.1.4.1.4526.17.216.9.1 | RowrlOspfv3VirtIfEntry | not-accessible | current | Information about a single virtual interface. The information in this table is persistent, and when written, the entity SHOULD save the change to non-volatile … |
| 1.3.6.1.4.1.4526.17.216.9.1.1 | ColumnrlOspfv3VirtIfProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPF process. |
| 1.3.6.1.4.1.4526.17.216.9.1.2 | ColumnrlOspfv3VirtIfAreaId | not-accessible | current | The transit area that the virtual link traverses. By definition, this is not Area 0. |
| 1.3.6.1.4.1.4526.17.216.9.1.3 | ColumnrlOspfv3VirtIfNeighbor | not-accessible | current | The Router ID of the virtual neighbor. |
| 1.3.6.1.4.1.4526.17.216.9.1.4 | ColumnrlOspfv3VirtIfIndex | read-only | current | The local interface index assigned by the OSPFv3 Process to this OSPFv3 virtual interface. It is advertised in Hellos sent over the virtual link and in the rou… |
| 1.3.6.1.4.1.4526.17.216.9.1.5 | ColumnrlOspfv3VirtIfInstId | read-only | current | The local Interface Instance ID assigned by the OSPFv3 Process to this OSPFv3 virtual interface. |
| 1.3.6.1.4.1.4526.17.216.9.1.6 | ColumnrlOspfv3VirtIfTransitDelay | read-create | current | The estimated number of seconds it takes to transmit a Link State Update packet over this interface. |
| 1.3.6.1.4.1.4526.17.216.9.1.7 | ColumnrlOspfv3VirtIfRetransInterval | read-create | current | The number of seconds between link state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting… |
| 1.3.6.1.4.1.4526.17.216.9.1.8 | ColumnrlOspfv3VirtIfHelloInterval | read-create | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.4.1.4526.17.216.9.1.9 | ColumnrlOspfv3VirtIfRtrDeadInterval | read-create | current | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello … |
| 1.3.6.1.4.1.4526.17.216.9.1.10 | ColumnrlOspfv3VirtIfState | read-only | current | OSPF virtual interface states. The same encoding as the ospfV3IfTable is used. |
| 1.3.6.1.4.1.4526.17.216.9.1.11 | ColumnrlOspfv3VirtIfEvents | read-only | current | The number of state changes or error events on this virtual link. Discontinuities in the value of this counter can occur at re-initialization of the management… |
| 1.3.6.1.4.1.4526.17.216.9.1.12 | ColumnrlOspfv3VirtIfRowStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.4.1.4526.17.216.9.1.13 | ColumnrlOspfv3VirtIfLinkScopeLsaCount | read-only | current | The total number of Link-scope link state advertisements in this virtual link's link state database. |
| 1.3.6.1.4.1.4526.17.216.9.1.14 | ColumnrlOspfv3VirtIfLinkLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Link-scope link state advertisements' LS checksums contained in this virtual link's link state database. The sum can be used to … |
| 1.3.6.1.4.1.4526.17.216.9.1.15 | ColumnrlOspfv3VirtIfAdminStatus | read-create | current | The desired administrative state of this virtual interface. |
| 1.3.6.1.4.1.4526.17.216.9.1.16 | ColumnrlOspfv3VirtIfOperStatus | read-only | current | The current operational state of this virtual interface. |
| 1.3.6.1.4.1.4526.17.216.10 | TablerlOspfv3NbrTable | not-accessible | current | A table describing all neighbors in the locality of the OSPFv3 router. |
| 1.3.6.1.4.1.4526.17.216.10.1 | RowrlOspfv3NbrEntry | not-accessible | current | The information regarding a single neighbor. |
| 1.3.6.1.4.1.4526.17.216.10.1.1 | ColumnrlOspfv3NbrProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPF process. |
| 1.3.6.1.4.1.4526.17.216.10.1.2 | ColumnrlOspfv3NbrIfIndex | not-accessible | current | The Local Link ID of the link over which the neighbor can be reached. |
| 1.3.6.1.4.1.4526.17.216.10.1.3 | ColumnrlOspfv3NbrIfInstId | not-accessible | current | Interface instance over which the neighbor can be reached. This ID has local link significance only. |
| 1.3.6.1.4.1.4526.17.216.10.1.4 | ColumnrlOspfv3NbrRtrId | not-accessible | current | A 32-bit unsigned integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.4526.17.216.10.1.5 | ColumnrlOspfv3NbrAddressType | read-only | current | The address type of rlOspfv3NbrAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.4526.17.216.10.1.6 | ColumnrlOspfv3NbrAddress | read-only | current | The IPv6 address of the neighbor associated with the local link. |
| 1.3.6.1.4.1.4526.17.216.10.1.7 | ColumnrlOspfv3NbrOptions | read-only | current | A bit mask corresponding to the neighbor's options field. |
| 1.3.6.1.4.1.4526.17.216.10.1.8 | ColumnrlOspfv3NbrPriority | read-only | current | The priority of this neighbor in the designated- router election algorithm. The value 0 signifies that the neighbor is not eligible to become the Designated Ro… |
| 1.3.6.1.4.1.4526.17.216.10.1.9 | ColumnrlOspfv3NbrState | read-only | current | The state of the relationship with this neighbor. |
| 1.3.6.1.4.1.4526.17.216.10.1.10 | ColumnrlOspfv3NbrEvents | read-only | current | The number of times this neighbor relationship has changed state or an error has occurred. Discontinuities in the value of this counter can occur at re-initial… |
| 1.3.6.1.4.1.4526.17.216.10.1.11 | ColumnrlOspfv3NbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.4526.17.216.10.1.12 | ColumnrlOspfv3NbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor. |
| 1.3.6.1.4.1.4526.17.216.10.1.13 | ColumnrlOspfv3NbrIfId | read-only | current | The Interface ID that the neighbor advertises in its Hello packets on this link, that is, the neighbor's local interface index. |
| 1.3.6.1.4.1.4526.17.216.10.1.14 | ColumnrlOspfv3NbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.4.1.4526.17.216.10.1.15 | ColumnrlOspfv3NbrRestartHelperAge | read-only | current | Remaining time in current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.4526.17.216.10.1.16 | ColumnrlOspfv3NbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. none: no restart has yet been attempted. inProgress: a resta… |
| 1.3.6.1.4.1.4526.17.216.10.1.17 | ColumnrlOspfv3NbrDeadTime | read-only | current | The time remaining in seconds within which we need to receive a hello packet from the neighbor or we declare the adjacency down. If fast hellos area in use, th… |
| 1.3.6.1.4.1.4526.17.216.10.1.18 | ColumnrlOspfv3NbrAreaId | read-only | current | The area to which the neighbor belongs. If the oper_status is down, then this value is set to zero and the field is not valid. |
| 1.3.6.1.4.1.4526.17.216.11 | TablerlOspfv3CfgNbrTable | not-accessible | current | A table describing all configured neighbors. The Configured Neighbors table just gives OSPFv3 information for sending OSPFv3 packets to potential neighbors and… |
| 1.3.6.1.4.1.4526.17.216.11.1 | RowrlOspfv3CfgNbrEntry | not-accessible | current | The information regarding a single configured neighbor. The information in this table is persistent, and when written, the entity SHOULD save the change to non… |
| 1.3.6.1.4.1.4526.17.216.11.1.1 | ColumnrlOspf3CfgNbrProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPF process. |
| 1.3.6.1.4.1.4526.17.216.11.1.2 | ColumnrlOspfv3CfgNbrIfIndex | not-accessible | current | The Local Link ID of the link over which the neighbor can be reached. |
| 1.3.6.1.4.1.4526.17.216.11.1.3 | ColumnrlOspfv3CfgNbrIfInstId | not-accessible | current | Interface instance over which the neighbor can be reached. This ID has local link significance only. |
| 1.3.6.1.4.1.4526.17.216.11.1.4 | ColumnrlOspfv3CfgNbrAddressType | not-accessible | current | The address type of rlOspfv3NbrAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.4526.17.216.11.1.5 | ColumnrlOspfv3CfgNbrAddress | not-accessible | current | The IPv6 address of the neighbor associated with the local link. |
| 1.3.6.1.4.1.4526.17.216.11.1.6 | ColumnrlOspfv3CfgNbrPriority | read-create | current | The priority of this neighbor in the designated- router election algorithm. The value 0 signifies that the neighbor is not eligible to become the Designated Ro… |
| 1.3.6.1.4.1.4526.17.216.11.1.7 | ColumnrlOspfv3CfgNbrRowStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.4.1.4526.17.216.12 | TablerlOspfv3VirtNbrTable | not-accessible | current | A table describing all virtual neighbors. |
| 1.3.6.1.4.1.4526.17.216.12.1 | RowrlOspfv3VirtNbrEntry | not-accessible | current | Virtual neighbor information. |
| 1.3.6.1.4.1.4526.17.216.12.1.1 | ColumnrlOspfv3VirtNbrProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPF process. |
| 1.3.6.1.4.1.4526.17.216.12.1.2 | ColumnrlOspfv3VirtNbrArea | not-accessible | current | The transit area Identifier. |
| 1.3.6.1.4.1.4526.17.216.12.1.3 | ColumnrlOspfv3VirtNbrRtrId | not-accessible | current | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.4526.17.216.12.1.4 | ColumnrlOspfv3VirtNbrIfIndex | read-only | current | The local Interface ID for the virtual link over which the neighbor can be reached. |
| 1.3.6.1.4.1.4526.17.216.12.1.5 | ColumnrlOspfv3VirtNbrIfInstId | read-only | current | The interface instance for the virtual link over which the neighbor can be reached. |
| 1.3.6.1.4.1.4526.17.216.12.1.6 | ColumnrlOspfv3VirtNbrAddressType | read-only | current | The address type of rlOspfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.4526.17.216.12.1.7 | ColumnrlOspfv3VirtNbrAddress | read-only | current | The IPv6 address advertised by this virtual neighbor. It must be a global scope address. |
| 1.3.6.1.4.1.4526.17.216.12.1.8 | ColumnrlOspfv3VirtNbrOptions | read-only | current | A bit mask corresponding to the neighbor's options field. |
| 1.3.6.1.4.1.4526.17.216.12.1.9 | ColumnrlOspfv3VirtNbrState | read-only | current | The state of the virtual neighbor relationship. |
| 1.3.6.1.4.1.4526.17.216.12.1.10 | ColumnrlOspfv3VirtNbrEvents | read-only | current | The number of times this virtual link has changed its state or an error has occurred. Discontinuities in the value of this counter can occur at re-initializati… |
| 1.3.6.1.4.1.4526.17.216.12.1.11 | ColumnrlOspfv3VirtNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.4526.17.216.12.1.12 | ColumnrlOspfv3VirtNbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor. |
| 1.3.6.1.4.1.4526.17.216.12.1.13 | ColumnrlOspfv3VirtNbrIfId | read-only | current | The Interface ID that the neighbor advertises in its Hello packets on this virtual link, that is, the neighbor's local Interface ID. |
| 1.3.6.1.4.1.4526.17.216.12.1.14 | ColumnrlOspfv3VirtNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a graceful restart helper for the neighbor. |
| 1.3.6.1.4.1.4526.17.216.12.1.15 | ColumnrlOspfv3VirtNbrRestartHelperAge | read-only | current | Remaining time in the current OSPF graceful restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.4526.17.216.12.1.16 | ColumnrlOspfv3VirtNbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a graceful restart helper for the neighbor. none: no restart has yet been attempted. inProgress: a resta… |
| 1.3.6.1.4.1.4526.17.216.12.1.17 | ColumnrlOspfv3VirtNbrDeadTime | read-only | current | The time remaining in seconds within which we need to receive a hello packet from the neighbor or we declare the adjacency down. If fast hellos area in use, th… |
| 1.3.6.1.4.1.4526.17.216.13 | TablerlOspfv3AreaAggregateTable | not-accessible | current | The Area Aggregate Table acts as an adjunct to the Area Table. It describes those address aggregates that are configured to be propagated from an area. Its pur… |
| 1.3.6.1.4.1.4526.17.216.13.1 | RowrlOspfv3AreaAggregateEntry | not-accessible | current | A single area aggregate entry. Information in this table is persistent, and when this object is written, the entity SHOULD save the change to non-volatile stor… |
| 1.3.6.1.4.1.4526.17.216.13.1.1 | ColumnrlOspfv3AreaAggregateProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPF process. |
| 1.3.6.1.4.1.4526.17.216.13.1.2 | ColumnrlOspfv3AreaAggregateAreaID | not-accessible | current | The area the Address Aggregate is to be found within. |
| 1.3.6.1.4.1.4526.17.216.13.1.3 | ColumnrlOspfv3AreaAggregateAreaLsdbType | not-accessible | current | The type of the Address Aggregate. This field specifies the Area LSDB type that this Address Aggregate applies to. |
| 1.3.6.1.4.1.4526.17.216.13.1.4 | ColumnrlOspfv3AreaAggregatePrefixType | not-accessible | current | The prefix type of rlOspfv3AreaAggregatePrefix. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.4526.17.216.13.1.5 | ColumnrlOspfv3AreaAggregatePrefix | not-accessible | current | The IPv6 prefix. |
| 1.3.6.1.4.1.4526.17.216.13.1.6 | ColumnrlOspfv3AreaAggregatePrefixLength | not-accessible | current | The length of the prefix (in bits). A prefix can not be shorter than 3 bits. |
| 1.3.6.1.4.1.4526.17.216.13.1.7 | ColumnrlOspfv3AreaAggregateRowStatus | read-create | current | This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect… |
| 1.3.6.1.4.1.4526.17.216.13.1.8 | ColumnrlOspfv3AreaAggregateEffect | read-create | current | Prefixes subsumed by ranges will either trigger the advertisement of the indicated aggregate (advertiseMatching) or result in the prefix not being advertised a… |
| 1.3.6.1.4.1.4526.17.216.13.1.9 | ColumnrlOspfv3AreaAggregateRouteTag | read-create | current | This tag is advertised only in the summarized As-External LSA when summarizing from NSSA-LSAs to AS-External-LSAs. |
| 1.3.6.1.4.1.4526.17.216.14 | TablerlOspfv3VirtLinkLsdbTable | not-accessible | current | The OSPFv3 Process's Link-scope LSDB for virtual interfaces. The LSDB contains the Link-scope link state advertisements from virtual interfaces. |
| 1.3.6.1.4.1.4526.17.216.14.1 | RowrlOspfv3VirtLinkLsdbEntry | not-accessible | current | A single Link-scope link state advertisement for a virtual interface. |
| 1.3.6.1.4.1.4526.17.216.14.1.1 | ColumnrlOspfv3VirtLinkLsdbProcessId | read-only | current | A 32-bit integer uniquely identifying an OSPF process. |
| 1.3.6.1.4.1.4526.17.216.14.1.2 | ColumnrlOspfv3VirtLinkLsdbIfAreaId | not-accessible | current | The transit area that the virtual link traverses. By definition, this is not Area 0. |
| 1.3.6.1.4.1.4526.17.216.14.1.3 | ColumnrlOspfv3VirtLinkLsdbIfNeighbor | not-accessible | current | The Router ID of the virtual neighbor. |
| 1.3.6.1.4.1.4526.17.216.14.1.4 | ColumnrlOspfv3VirtLinkLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertisement format. Link-scope LSAs unrecognized by the router are also stored … |
| 1.3.6.1.4.1.4526.17.216.14.1.5 | ColumnrlOspfv3VirtLinkLsdbRouterId | not-accessible | current | The 32-bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4526.17.216.14.1.6 | ColumnrlOspfv3VirtLinkLsdbLsid | not-accessible | current | The Link State ID is an LS type-specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.4526.17.216.14.1.7 | ColumnrlOspfv3VirtLinkLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.4.1.4526.17.216.14.1.8 | ColumnrlOspfv3VirtLinkLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. The high-order bit of the LS age field is considered the DoNotAge bit for support of on-deman… |
| 1.3.6.1.4.1.4526.17.216.14.1.9 | ColumnrlOspfv3VirtLinkLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4526.17.216.14.1.10 | ColumnrlOspfv3VirtLinkLsdbAdvertisement | read-only | current | The entire link state advertisement, including its header. |
| 1.3.6.1.4.1.4526.17.216.14.1.11 | ColumnrlOspfv3VirtLinkLsdbTypeKnown | read-only | current | The value true (1) indicates that the LSA type is recognized by this router. |
| 1.3.6.1.4.1.4526.17.216.15 | NoderlOspfv3NotificationEntry | |||
| 1.3.6.1.4.1.4526.17.216.15.1 | ScalarrlOspfv3ConfigErrorType | accessible-for-notify | current | Potential types of configuration conflicts. Used by the rlOspfv3ConfigError and rlOspfv3ConfigVirtError notifications. |
| 1.3.6.1.4.1.4526.17.216.15.2 | ScalarrlOspfv3PacketType | accessible-for-notify | current | OSPFv3 packet types. |
| 1.3.6.1.4.1.4526.17.216.15.3 | ScalarrlOspfv3PacketSrc | accessible-for-notify | current | The IPv6 address of an inbound packet that cannot be identified by a neighbor instance. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.4526.17.216.16 | NoderlOspfv3Notifications | |||
| 1.3.6.1.4.1.4526.17.216.16.1 | NotificationrlOspfv3VirtIfStateChange | current | An rlOspfv3VirtIfStateChange notification signifies that there has been a change in the state of an OSPFv3 virtual interface. This notification should be gener… | |
| 1.3.6.1.4.1.4526.17.216.16.2 | NotificationrlOspfv3NbrStateChange | current | An rlOspfv3NbrStateChange notification signifies that there has been a change in the state of a non-virtual OSPFv3 neighbor. This notification should be genera… | |
| 1.3.6.1.4.1.4526.17.216.16.3 | NotificationrlOspfv3VirtNbrStateChange | current | An rlOspfv3VirtNbrStateChange notification signifies that there has been a change in the state of an OSPFv3 virtual neighbor. This notification should be gener… | |
| 1.3.6.1.4.1.4526.17.216.16.4 | NotificationrlOspfv3IfConfigError | current | An rlOspfv3IfConfigError notification signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflic… | |
| 1.3.6.1.4.1.4526.17.216.16.5 | NotificationrlOspfv3VirtIfConfigError | current | An rlOspfv3VirtIfConfigError notification signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflic… | |
| 1.3.6.1.4.1.4526.17.216.16.6 | NotificationrlOspfv3IfRxBadPacket | current | An rlOspfv3IfRxBadPacket notification signifies that an OSPFv3 packet that cannot be parsed has been received on a non-virtual interface. | |
| 1.3.6.1.4.1.4526.17.216.16.7 | NotificationrlOspfv3VirtIfRxBadPacket | current | An rlOspfv3VirtIfRxBadPacket notification signifies that an OSPFv3 packet that cannot be parsed has been received on a virtual interface. | |
| 1.3.6.1.4.1.4526.17.216.16.8 | NotificationrlOspfv3LsdbOverflow | current | An rlOspfv3LsdbOverflow notification signifies that the number of LSAs in the router's link state database has exceeded rlOspfv3ExtAreaLsdbLimit. | |
| 1.3.6.1.4.1.4526.17.216.16.9 | NotificationrlOspfv3LsdbApproachingOverflow | current | An rlOspfv3LsdbApproachingOverflow notification signifies that the number of LSAs in the router's link state database has exceeded ninety percent of rlOspfv3Ex… | |
| 1.3.6.1.4.1.4526.17.216.16.10 | NotificationrlOspfv3IfStateChange | current | An rlOspfv3IfStateChange notification signifies that there has been a change in the state of a non-virtual OSPFv3 interface. This notification should be genera… | |
| 1.3.6.1.4.1.4526.17.216.16.11 | NotificationrlOspfv3NssaTranslatorStatusChange | current | An rlOspfv3NssaTranslatorStatusChange notification indicates that there has been a change in the router's ability to translate OSPFv3 NSSA LSAs into OSPFv3 Ext… | |
| 1.3.6.1.4.1.4526.17.216.16.12 | NotificationrlOspfv3RestartStatusChange | current | An rlOspfv3RestartStatusChange notification signifies that there has been a change in the graceful restart state for the router. This notification should be ge… | |
| 1.3.6.1.4.1.4526.17.216.16.13 | NotificationrlOspfv3NbrRestartHelperStatusChange | current | An rlOspfv3NbrRestartHelperStatusChange notification signifies that there has been a change in the graceful restart helper state for the neighbor. This notific… | |
| 1.3.6.1.4.1.4526.17.216.16.14 | NotificationrlOspfv3VirtNbrRestartHelperStatusChange | current | An rlOspfv3VirtNbrRestartHelperStatusChange notification signifies that there has been a change in the graceful restart helper state for the virtual neighbor. … | |
| 1.3.6.1.4.1.4526.17.216.17 | ScalarrlOspfv3EnableNotificationsOspfEvents | read-write | current | A bit mask indicating enable SNMP notifications for OSPF errors. Bit 0, if set, for authenticationFailure trap. enables only the ospfIfFailure trap. Allows SNM… |
| 1.3.6.1.4.1.4526.17.216.18 | ScalarrlOspfv3EnableNotificationsOspfRateLimitSeconds | read-write | current | Sets the rate limit window size, in seconds. A number from 2 to 60. The default value is 10. |
| 1.3.6.1.4.1.4526.17.216.19 | ScalarrlOspfv3EnableNotificationsOspfRateLimitTrapNumber | read-write | current | Sets the maximum number of traps sent during the window time. A number from 0 to 300. The default number is 7. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RlLsID | Unsigned32 | current | A unique 32-bit identifier of the piece of the routing domain that is being described by a link state advertisement. In contrast to OSPFv2, the Link State ID (LSID) has no addressing semantics. |
| RlOspfv3FastHelloMultiplierRange | Integer32 (3..20) | current | The range of hello multipliers that determine how often Fast Hellos are exchanged. |
| RlOspfv3RestartExitReason | INTEGER { none (1), inProgress (2), completed (3), timedOut (4), topologyChanged (5) } | current | The reason for exiting an attempted graceful restart. |
| RlOspfv3RestartHelperStatus | INTEGER { notHelping(1), helping(2) } | current | Indicates whether the router is acting as a hitless restart helper for a neighbor. |
| RlOspfv3UpToRefreshInterval | Integer32 (1..1800) | current | The values configurable for variables bounded by the Refresh Interval. |
| RlOspfv3UpToRefreshIntervalTC | Unsigned32 (1..'FFFF'h) | current | The values one might be able to configure for variables bounded by the Refresh Interval. |
| RlRouterID | Unsigned32 | current | A 32-bit, unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses if IPv4 is configured on the router. |