NTN-QOS-POLICY-EVOL-PIB
683 objects
An Avaya Network's management module containing data definitions related to QoS components and services supported by network devices.
Imported Objects
| BN-IF-EXTENSIONS-MIB | bnIfExtnPort bnIfExtnSlot |
| DIFFSERV-DSCP-TC | Dscp DscpOrAny |
| DIFFSERV-MIB | IndexInteger IndexIntegerNextFree |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressIPv4 InetAddressPrefixLength InetAddressType InetPortNumber |
| INTEGRATED-SERVICES-MIB | BurstSize |
| POLICY-FRAMEWORK-PIB | Role RoleCombination |
| Q-BRIDGE-MIB | PortList VlanId |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 zeroDotZero |
| SNMPv2-TC | AutonomousType MacAddress RowPointer RowStatus StorageType TEXTUAL-CONVENTION TruthValue |
| SYNOPTICS-ROOT-MIB | policy |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.7 | IdentityntnQosPolicyEvolPib | An Avaya Network's management module containing data definitions related to QoS components and services supported by network devices. | ||
| 1.3.6.1.4.1.45.4.7.1 | NodentnQosPolicyEvolPibClasses | |||
| 1.3.6.1.4.1.45.4.7.1.1 | TablentnQosInterfaceTypeTable | not-accessible | current | Interface type definitions. This class describes the types of interfaces that exist on the device. An interface type is denoted by its designated role identifi… |
| 1.3.6.1.4.1.45.4.7.1.1.1 | RowntnQosInterfaceTypeEntry | not-accessible | current | An instance of this class describes the characteristics of a type of an interface. Interface type characteristics include a role combination identifier, an int… |
| 1.3.6.1.4.1.45.4.7.1.1.1.1 | ColumnntnQosInterfaceTypeId | not-accessible | current | An arbitrary integer index that uniquely identifies a instance of the ntnQosInterfaceType class. Class instances may not be contiguous. |
| 1.3.6.1.4.1.45.4.7.1.1.1.2 | ColumnntnQosInterfaceTypeRoles | read-create | current | The role combination that is used to identify interfaces with the characteristics specified by the attributes of this class instance. Interface role combinatio… |
| 1.3.6.1.4.1.45.4.7.1.1.1.3 | ColumnntnQosInterfaceTypeIfClass | read-create | current | A value describing the overall classification of traffic received on interfaces with the given role combination. Traffic received on trusted interfaces may be … |
| 1.3.6.1.4.1.45.4.7.1.1.1.4 | ColumnntnQosInterfaceTypeCapabilities | read-create | current | An enumeration of interface capabilities. Used by the PDP or network manager to select which policies and configuration it should push to the PEP. |
| 1.3.6.1.4.1.45.4.7.1.1.1.5 | ColumnntnQosInterfaceTypeStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.1.1.6 | ColumnntnQosInterfaceTypeStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.2 | TablentnQosQsetPriAssignmentTable | not-accessible | current | Supports the assignment of 802.1p user priority values to a queue for each interface with a specific queue set. There will be 8 instances of this class for eac… |
| 1.3.6.1.4.1.45.4.7.1.2.1 | RowntnQosQsetPriAssignmentEntry | not-accessible | current | An instance of the ntnQosQsetPriAssignment class. |
| 1.3.6.1.4.1.45.4.7.1.2.1.1 | ColumnntnQosQsetPriAssignmentId | not-accessible | current | An index that is used to uniquely identify the instance of the ntnQosQsetPriAssignment class. |
| 1.3.6.1.4.1.45.4.7.1.2.1.2 | ColumnntnQosQsetPriAssignmentQset | read-create | current | The queue set with which an interface must be configured to support the Pri-to-queue assignment described by this instance. The specified queue set must be def… |
| 1.3.6.1.4.1.45.4.7.1.2.1.3 | ColumnntnQosQsetPriAssignmentPri | read-create | current | The 802.1p user priority to which this class instance applies. |
| 1.3.6.1.4.1.45.4.7.1.2.1.4 | ColumnntnQosQsetPriAssignmentQueue | read-create | current | The specific queue, within the queue set that is associated with the interface set identified by the ntnQosQsetPriAssignmentRoles tag, on which traffic with th… |
| 1.3.6.1.4.1.45.4.7.1.2.1.5 | ColumnntnQosQsetPriAssignmentStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.2.1.6 | ColumnntnQosQsetPriAssignmentStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.3 | TablentnQosQsetDscpAssignmentTable | not-accessible | current | Supports the assignment of DSCP values to a queue for each interface with a specific queue set. There will be 64 instances of this class for each supported que… |
| 1.3.6.1.4.1.45.4.7.1.3.1 | RowntnQosQsetDscpAssignmentEntry | not-accessible | current | An instance of the ntnQosQsetDscpAssignment class. |
| 1.3.6.1.4.1.45.4.7.1.3.1.1 | ColumnntnQosQsetDscpAssignmentId | not-accessible | current | An index that is used to uniquely identify the instance of the ntnQosQsetDscpAssignment class. |
| 1.3.6.1.4.1.45.4.7.1.3.1.2 | ColumnntnQosQsetDscpAssignmentQset | read-create | current | The queue set with which an interface must be configured to support the Dscp-to-queue assignment described by this instance. The specified queue set must be de… |
| 1.3.6.1.4.1.45.4.7.1.3.1.3 | ColumnntnQosQsetDscpAssignmentDscp | read-create | current | The DSCP value to which this class instance applies. |
| 1.3.6.1.4.1.45.4.7.1.3.1.4 | ColumnntnQosQsetDscpAssignmentQueue | read-create | current | The specific queue, within the queue set that is associated with the interface set identified by the ntnQosQsetDscpAssignmentRoles tag, on which traffic with t… |
| 1.3.6.1.4.1.45.4.7.1.3.1.5 | ColumnntnQosQsetDscpAssignmentStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.3.1.6 | ColumnntnQosQsetDscpAssignmentStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.4 | TablentnQosShapingParamsTable | not-accessible | current | Supports the definition of shaping parameters that can be applied to individual flows. Shaping criteria is associated with a flow using the qosTargetShaper att… |
| 1.3.6.1.4.1.45.4.7.1.4.1 | RowntnQosShapingParamsEntry | not-accessible | current | An instance of the ntnQosShapingParams class. |
| 1.3.6.1.4.1.45.4.7.1.4.1.1 | ColumnntnQosShapingParamsId | not-accessible | current | An index that is used to uniquely identify the instance of the ntnQosShapingParams class. |
| 1.3.6.1.4.1.45.4.7.1.4.1.2 | ColumnntnQosShapingParamsRate | read-create | current | The maximum rate, in kilobits per second, at which traffic shaped using this rate criteria will be transmitted over a given period of time. Transmitted traffic… |
| 1.3.6.1.4.1.45.4.7.1.4.1.3 | ColumnntnQosShapingParamsBurstSize | read-create | current | The maximum traffic burst size, in bytes, that can be transmitted without experiencing a shaping delay. Typically, this value represents the maximum number of … |
| 1.3.6.1.4.1.45.4.7.1.4.1.4 | ColumnntnQosShapingParamsQueueSize | read-create | current | The amount of traffic, in packets, that may exceed the maximum burst size and still be queued for transmission. This value specifies the size of a shaping queu… |
| 1.3.6.1.4.1.45.4.7.1.4.1.5 | ColumnntnQosShapingParamsStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.4.1.6 | ColumnntnQosShapingParamsStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.4.1.7 | ColumnntnQosShapingParamsLabel | read-create | current | A label used to reference the entry in a textual manner. |
| 1.3.6.1.4.1.45.4.7.1.5 | NodentnClassifierClasses | |||
| 1.3.6.1.4.1.45.4.7.1.5.1 | ScalarntnDsMultiFieldClfrNextFree | read-only | current | This object contains an unused value for ntnDsMultiFieldClfrId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.5.2 | TablentnDsMultiFieldClfrTable | not-accessible | current | A table of IP Multi-Field Classifier filter entries that a system may use to identify IP traffic. |
| 1.3.6.1.4.1.45.4.7.1.5.2.1 | RowntnDsMultiFieldClfrEntry | not-accessible | current | An IP Multi-Field Classifier entry describes a single filter. |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.1 | ColumnntnDsMultiFieldClfrId | not-accessible | current | An index that enumerates the Multi-Field Classifier filter entries. Managers obtain new values for row creation in this table by reading ntnDsMultiFieldClfrNex… |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.2 | ColumnntnDsMultiFieldClfrAddrType | read-create | current | The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a cl… |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.3 | ColumnntnDsMultiFieldClfrDstAddr | read-create | current | The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnDsMultiFieldClfrDstPrefi… |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.4 | ColumnntnDsMultiFieldClfrDstPrefixLength | read-create | current | The length of the CIDR Prefix carried in ntnDsMultiFieldClfrDstAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicate… |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.5 | ColumnntnDsMultiFieldClfrSrcAddr | read-create | current | The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnDsMultiFieldClfrSrcPrefixLeng… |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.6 | ColumnntnDsMultiFieldClfrSrcPrefixLength | read-create | current | The length of the CIDR Prefix carried in ntnDsMultiFieldClfrSrcAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicate… |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.7 | ColumnntnDsMultiFieldClfrDscp | read-create | current | The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not been defined and thus all DSCP … |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.8 | ColumnntnDsMultiFieldClfrFlowId | read-create | current | The flow identifier in an IPv6 header. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.9 | ColumnntnDsMultiFieldClfrProtocol | read-create | current | The IP protocol to match against the IPv4 protocol number or the IPv6 Next-Header number in the packet. A value of 255 means match all. Note the protocol numbe… |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.10 | ColumnntnDsMultiFieldClfrDstL4PortMin | read-create | current | The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.11 | ColumnntnDsMultiFieldClfrDstL4PortMax | read-create | current | The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or grea… |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.12 | ColumnntnDsMultiFieldClfrSrcL4PortMin | read-create | current | The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.13 | ColumnntnDsMultiFieldClfrSrcL4PortMax | read-create | current | The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater t… |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.14 | ColumnntnDsMultiFieldClfrStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.15 | ColumnntnDsMultiFieldClfrStatus | read-create | current | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.16 | ColumnntnDsMultiFieldClfrLabel | read-create | current | A label used to reference the classifier entry in a textual manner. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.17 | ColumnntnDsMultiFieldClfrSessionId | read-create | current | A session identifier used to reference transitory (volatile) data. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.18 | ColumnntnDsMultiFieldClfrVersion | read-create | current | Version indicator for ntnDsMultiFieldClfrTable. |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.19 | ColumnntnDsMultiFieldClfrIpFlags | read-create | current | Represents the flags present in an IPv4 header. If a bit that is associated with a specific IP flag is set in this attribute, IPv4 packets with the specified f… |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.20 | ColumnntnDsMultiFieldClfrTcpCtrlFlags | read-create | current | Represents the control flags (code bits) present in an TCP header. If a bit that is associated with a specific TCP control flag is set in this attribute, TCP p… |
| 1.3.6.1.4.1.45.4.7.1.5.2.1.21 | ColumnntnDsMultiFieldClfrIpv4Options | read-create | current | This object indicates whether the presence, or lack thereof, of IPv4 options in an IPv4 packet should should be considered when looking for a match for this cl… |
| 1.3.6.1.4.1.45.4.7.1.5.3 | ScalarntnL2MultiFieldClfrNextFree | read-only | current | This object contains an unused value for ntnL2MultiFieldClfrId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.5.4 | TablentnL2MultiFieldClfrTable | not-accessible | current | IEEE 802-based classifier definitions. A class that contains attributes of IEEE 802 (e.g., 802.3) traffic that form an association that is used to perform traf… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1 | RowntnL2MultiFieldClfrEntry | not-accessible | current | IEEE 802-based classifier definitions. An entry specifies (potentially) several distinct matching components. Each component is tested against the data in a fr… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.1 | ColumnntnL2MultiFieldClfrId | not-accessible | current | An arbitrary integer index that uniquely identifies this 802 classifier among all of the 802 classifiers. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.2 | ColumnntnL2MultiFieldClfrDstAddr | read-create | current | The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical address specified by this objec… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.3 | ColumnntnL2MultiFieldClfrDstAddrMask | read-create | current | This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against the address specified in the … |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.4 | ColumnntnL2MultiFieldClfrSrcAddr | read-create | current | The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches the physical address specified b… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.5 | ColumnntnL2MultiFieldClfrSrcAddrMask | read-create | current | This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison against the address specified in t… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.6 | ColumnntnL2MultiFieldClfrVlanIdMin | read-create | current | The minimum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrVlanIdMin value must be l… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.7 | ColumnntnL2MultiFieldClfrVlanIdMax | read-create | current | The maximum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrVlanIdMax value must be g… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.8 | ColumnntnL2MultiFieldClfrVlanTag | read-create | current | This object indicates the data link layer packet format that frames must have to match this L2 classifier entry. A value of 'untagged(1)' indicates that only f… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.9 | ColumnntnL2MultiFieldClfrEtherType | read-create | current | This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Example settings would include '… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.10 | ColumnntnL2MultiFieldClfrUserPriority | read-create | current | The 802.1p user priority value against which the value contained in the user priority field of a tagged 802.1 frame is compared. A test for equality is perform… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.11 | ColumnntnL2MultiFieldClfrStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.12 | ColumnntnL2MultiFieldClfrStatus | read-create | current | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.13 | ColumnntnL2MultiFieldClfrLabel | read-create | current | A label used to reference the classifier entry in a textual manner. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.14 | ColumnntnL2MultiFieldClfrSessionId | read-create | current | A session identifier used to reference transitory (volatile) data. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.15 | ColumnntnL2MultiFieldClfrVersion | read-create | current | Version indicator for ntnL2MultiFieldClfrTable. |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.16 | ColumnntnL2MultiFieldClfrPktType | read-create | current | This object indicates the data link layer frame format that frames must have to match this L2 classifier entry. A value of 'ethernetII(1)' indicates that only … |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.17 | ColumnntnL2MultiFieldClfrIvidMin | read-create | current | The minimum value that the Inner VLAN ID (Ivid) in a double tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrIvidMin val… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.18 | ColumnntnL2MultiFieldClfrIvidMax | read-create | current | The maximum value that the Inner VLAN ID (Ivid) in a double tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrIvidMax val… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.19 | ColumnntnL2MultiFieldClfrTPID | read-create | current | This object specifies the value that will be compared against the value contained in the Ethertype field of the outer tag of a single or a double tagged (802.1… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.20 | ColumnntnL2MultiFieldClfrCFI | read-create | current | This object indicates the data link layer frame format that frames must have to match this L2 classifier entry. A value of 'cfiZero(1)' indicates that only tag… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.21 | ColumnntnL2MultiFieldClfrITPID | read-create | current | This object specifies the value that will be compared against the value contained in the Ethertype field of the inner tag of a double tagged (802.1ad QinQ) pac… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.22 | ColumnntnL2MultiFieldClfrICFI | read-create | current | This object indicates the data link layer frame format that frames must have to match this L2 classifier entry. A value of 'cfiZero(1)' indicates that only dou… |
| 1.3.6.1.4.1.45.4.7.1.5.4.1.23 | ColumnntnL2MultiFieldClfrIUserPriority | read-create | current | The 802.1p user priority value against which the value contained in the user priority field of the inner tag of a double tagged 802.1 frame is compared. A test… |
| 1.3.6.1.4.1.45.4.7.1.5.5 | ScalarntnSystemClfrNextFree | read-only | current | This object contains an unused value for ntnSystemClfrId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.5.6 | TablentnSystemClfrTable | not-accessible | current | The System Classifier Table defines classification data that is platform or hardware specific. |
| 1.3.6.1.4.1.45.4.7.1.5.6.1 | RowntnSystemClfrEntry | not-accessible | current | An entry in the System Classifier Table describes classification data that is specifically related to system or hardware capabilities. As such, support for thi… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.1 | ColumnntnSystemClfrId | not-accessible | current | An index that enumerates the system classifier entries. Managers can obtain new index values for row creation in this table by reading ntnSystemClfrNextFree. V… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.2 | ColumnntnSystemClfrUnknownUcastFrames | read-create | current | If 'true(1)', frames containing an unknown unicast destination address will match this classification entry. A value of 'false(2)' indicates that no classifica… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.3 | ColumnntnSystemClfrUnknownMcastFrames | read-create | current | If 'true(1)', frames containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classifi… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.4 | ColumnntnSystemClfrKnownUcastFrames | read-create | current | If 'true(1)', frames containing a known unicast destination address will match this classification entry. A value of 'false(2)' indicates that no classificatio… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.5 | ColumnntnSystemClfrKnownMcastFrames | read-create | current | If 'true(1)', frames containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classificat… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.6 | ColumnntnSystemClfrBcastFrames | read-create | current | If 'true(1)', frames containing a broadcast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.7 | ColumnntnSystemClfrPatternPosition | read-create | current | Supports arbitrary pattern match classification. Up to 128 bytes of data within the first 128 bytes of a packet can be identified for pattern matching purposes… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.8 | ColumnntnSystemClfrPatternData | read-create | current | Supports arbitrary pattern match classification. Up to 128 bytes of data within the first 128 bytes of a packet can be identified for pattern matching purposes… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.9 | ColumnntnSystemClfrStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.10 | ColumnntnSystemClfrStatus | read-create | current | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.11 | ColumnntnSystemClfrPatternFormat | read-create | current | This object indicates the data link layer packet format that is used when specifying pattern match data. A value of 'untagged(1)' indicates that the specified … |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.12 | ColumnntnSystemClfrLabel | read-create | current | A label used to reference the classifier entry in a textual manner. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.13 | ColumnntnSystemClfrSessionId | read-create | current | A session identifier used to reference transitory (volatile) data. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.14 | ColumnntnSystemClfrVersion | read-create | current | Version indicator for ntnSystemClfrTable. |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.15 | ColumnntnSystemClfrUnknownIpMcast | read-create | current | If 'true(1)', IP packets containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no clas… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.16 | ColumnntnSystemClfrKnownIpMcast | read-create | current | If 'true(1)', IP packets containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classif… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.17 | ColumnntnSystemClfrNonIpPkt | read-create | current | If 'true(1)', non IP packets will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this packet typ… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.18 | ColumnntnSystemClfrPatternIpVersion | read-create | current | This object indicates the IP packet format that is used when specifying pattern match data. A value of 'notApplicable(1)' is used when the pattern match data c… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.19 | ColumnntnSystemClfrUnknownNonIpMcast | read-create | current | If 'true(1)', non-IP packets containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no … |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.20 | ColumnntnSystemClfrKnownNonIpMcast | read-create | current | If 'true(1)', non-IP packets containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no cla… |
| 1.3.6.1.4.1.45.4.7.1.5.6.1.21 | ColumnntnSystemClfrPatternL2Format | read-create | current | This object indicates the L2 packet format that is used when specifying pattern match data. A value of 'notApplicable(1)' is used when the pattern match data c… |
| 1.3.6.1.4.1.45.4.7.1.5.7 | ScalarntnClfrComponentNextFree | read-only | current | This object contains an unused value for ntnClfrComponentId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.5.8 | TablentnClfrComponentTable | not-accessible | current | The Classifier Component Table identifies classification data from protocol, media and hardware specific tables and links the data to form a single classifier. |
| 1.3.6.1.4.1.45.4.7.1.5.8.1 | RowntnClfrComponentEntry | not-accessible | current | An entry in the Classifier Component Table describes a collection of classification data from a single protocol, media or hardware specific classifier table. E… |
| 1.3.6.1.4.1.45.4.7.1.5.8.1.1 | ColumnntnClfrComponentId | not-accessible | current | An index that enumerates the classifier component entries. Managers can obtain new index values for row creation in this table by reading ntnClfrComponentNextF… |
| 1.3.6.1.4.1.45.4.7.1.5.8.1.2 | ColumnntnClfrComponentSpecific | read-create | current | Identifies an entry containing classification data in a protocol, media or hardware specific classifier table. Entries are referenced using a RowPointer value … |
| 1.3.6.1.4.1.45.4.7.1.5.8.1.3 | ColumnntnClfrComponentSetId | read-create | current | Identifies a set of classifier data. Entries in this table with the same value for this attribute are considered components of the same classifier. This set id… |
| 1.3.6.1.4.1.45.4.7.1.5.8.1.4 | ColumnntnClfrComponentLabel | read-create | current | A label used to reference the classifier component set in a textual manner. All members of the same component set, as determined by the value of the ntnClfrCom… |
| 1.3.6.1.4.1.45.4.7.1.5.8.1.5 | ColumnntnClfrComponentStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.5.8.1.6 | ColumnntnClfrComponentStatus | read-create | current | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.8.1.7 | ColumnntnClfrComponentSessionId | read-create | current | A session identifier used to reference transitory (volatile) data. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.8.1.8 | ColumnntnClfrComponentVersion | read-create | current | Version indicator for ntnClfrComponentTable. Members of the same classifier component set must all have the same version information. |
| 1.3.6.1.4.1.45.4.7.1.5.9 | ScalarntnClfrBlockNextFree | read-only | current | This object contains an unused value for ntnClfrBlockId ,or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.5.10 | TablentnClfrBlockTable | not-accessible | current | The Classifier Block Table supports the ability to group individual classifiers into an unordered list, or block, of classifiers. |
| 1.3.6.1.4.1.45.4.7.1.5.10.1 | RowntnClfrBlockEntry | not-accessible | current | An entry in the Classifier Block Table describes a single member of a group of the classifiers. Each entry identifies classification data, defined through the … |
| 1.3.6.1.4.1.45.4.7.1.5.10.1.1 | ColumnntnClfrBlockId | not-accessible | current | An index that enumerates the classifier block entries. Managers can obtain new index values for row creation in this table by reading ntnClfrBlockNextFree. Ver… |
| 1.3.6.1.4.1.45.4.7.1.5.10.1.2 | ColumnntnClfrBlockNumber | read-create | current | Identifies a group of classification entries. Entries in this table with the same value for this attribute are considered members of the same group (i.e., clas… |
| 1.3.6.1.4.1.45.4.7.1.5.10.1.3 | ColumnntnClfrBlockClfrCompSetId | read-create | current | Identifies a classifier component set in the Classifier Component Table (ntnClfrComponentTable) containing classification data. Component entries must exist pr… |
| 1.3.6.1.4.1.45.4.7.1.5.10.1.4 | ColumnntnClfrBlockMeter | read-create | current | This attribute identifies the meter that is associated with this classifier block. Meters are specified in the ntnQosMeterTable and associated tables. The corr… |
| 1.3.6.1.4.1.45.4.7.1.5.10.1.5 | ColumnntnClfrBlockAction | read-create | current | This attribute identifies the action that is to be initiated for flows that are not being metered and that match the classification criteria specified through … |
| 1.3.6.1.4.1.45.4.7.1.5.10.1.6 | ColumnntnClfrBlockLabel | read-create | current | A label used to reference the classifier group in a textual manner. All members of the same group, as determined by the value of the ntnClfrBlockNumber attribu… |
| 1.3.6.1.4.1.45.4.7.1.5.10.1.7 | ColumnntnClfrBlockStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.5.10.1.8 | ColumnntnClfrBlockStatus | read-create | current | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.10.1.9 | ColumnntnClfrBlockSessionId | read-create | current | A session identifier used to reference transitory (volatile) data. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.5.10.1.10 | ColumnntnClfrBlockVersion | read-create | current | Version indicator for ntnClfrBlockTable. Members of the same classifier block must all have the same version information. |
| 1.3.6.1.4.1.45.4.7.1.5.10.1.11 | ColumnntnClfrBlockPrecedence | read-create | current | The relative order in which the classifier sets associated with this block are applied, with regard to other classifiers sets within the block. Higher numbers … |
| 1.3.6.1.4.1.45.4.7.1.5.11 | ScalarntnClfrComponentSetNextFree | read-only | current | This object contains an unused value for ntnClfrComponentSetId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.5.12 | ScalarntnClfrBlockNumberNextFree | read-only | current | This object contains an unused value for ntnClfrBlockNumber ,or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.6 | NodentnQosMeterClasses | |||
| 1.3.6.1.4.1.45.4.7.1.6.1 | ScalarntnQosMeterNextFree | read-only | current | This object contains an unused value for ntnQosMeterId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.6.2 | TablentnQosMeterTable | not-accessible | current | This table enumerates specific meters that a system may use to police a stream of traffic. Specific meter details are to be found in table entry referenced by … |
| 1.3.6.1.4.1.45.4.7.1.6.2.1 | RowntnQosMeterEntry | not-accessible | current | An entry in the meter table describes a single conformance level of a meter. |
| 1.3.6.1.4.1.45.4.7.1.6.2.1.1 | ColumnntnQosMeterId | not-accessible | current | An index that enumerates the Meter entries. Managers can obtain new index values for row creation in this table by reading ntnQosMeterNextFree. Version 1/2 att… |
| 1.3.6.1.4.1.45.4.7.1.6.2.1.2 | ColumnntnQosMeterSucceedNext | read-create | current | If the traffic being processed does conform, based on the traffic profile associated with this entry, this selects the next element to handle traffic for this … |
| 1.3.6.1.4.1.45.4.7.1.6.2.1.3 | ColumnntnQosMeterFailNext | read-create | current | If the traffic being processed does not conform, based on the traffic profile associated with this entry, this selects the next element to handle traffic for t… |
| 1.3.6.1.4.1.45.4.7.1.6.2.1.4 | ColumnntnQosMeterSpecific | read-create | current | This indicates the behavior of the meter by pointing to an entry containing detailed parameters. Note that entries in that specific table must be managed expli… |
| 1.3.6.1.4.1.45.4.7.1.6.2.1.5 | ColumnntnQosMeterOutOfProfileStats | read-create | current | Identifies an entry in the Count Action Table (ntnQosCountActTable) that is used to accumulate statistics related to traffic processed based on this meter data… |
| 1.3.6.1.4.1.45.4.7.1.6.2.1.6 | ColumnntnQosMeterLabel | read-create | current | A label used to reference the meter data in a textual manner. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.6.2.1.7 | ColumnntnQosMeterStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.6.2.1.8 | ColumnntnQosMeterStatus | read-create | current | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.6.2.1.9 | ColumnntnQosMeterSessionId | read-create | current | A session identifier used to reference transitory (volatile) data. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.6.2.1.10 | ColumnntnQosMeterVersion | read-create | current | Version indicator for ntnQosMeterTable. |
| 1.3.6.1.4.1.45.4.7.1.6.3 | ScalarntnQosTBParamNextFree | read-only | current | This object contains an unused value for ntnQosTBParamId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.6.4 | TablentnQosTBParamTable | not-accessible | current | Entries in this table enumerate a set of token bucket meter parameters that a system may use to police a stream of traffic. Such meters are modeled here as hav… |
| 1.3.6.1.4.1.45.4.7.1.6.4.1 | RowntnQosTBParamEntry | not-accessible | current | An entry that describes a single set of token bucket parameters. |
| 1.3.6.1.4.1.45.4.7.1.6.4.1.1 | ColumnntnQosTBParamId | not-accessible | current | An index that enumerates the Token Bucket Parameter entries. Managers can obtain new index values for row creation in this table by reading ntnQosTBParamNextFr… |
| 1.3.6.1.4.1.45.4.7.1.6.4.1.2 | ColumnntnQosTBParamType | read-create | current | The Metering algorithm associated with the Token Bucket parameters. The number and type of algorithms supported is implementation dependent. Potential algorith… |
| 1.3.6.1.4.1.45.4.7.1.6.4.1.3 | ColumnntnQosTBParamRate | read-create | current | The token-bucket rate, in kilobits per second (kbps). This attribute is used for: CIR for Simple Token Bucket CIR in RFC 2697 for srTCM CIR and PIR in RFC 2698… |
| 1.3.6.1.4.1.45.4.7.1.6.4.1.4 | ColumnntnQosTBParamBurstSize | read-create | current | The maximum number of bytes in a single transmission burst. This attribute is used for: Token bucket size for Simple Token Bucket CBS and EBS in RFC 2697 for s… |
| 1.3.6.1.4.1.45.4.7.1.6.4.1.5 | ColumnntnQosTBParamInterval | read-create | current | The time interval used with the token bucket. This attribute is used for: Average Rate Meter (Informal DS Model section 5.2.1) - Delta Simple Token Bucket Mete… |
| 1.3.6.1.4.1.45.4.7.1.6.4.1.6 | ColumnntnQosTBParamLabel | read-create | current | A label used to reference the token bucket data in a textual manner. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.6.4.1.7 | ColumnntnQosTBParamStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.6.4.1.8 | ColumnntnQosTBParamStatus | read-create | current | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.6.4.1.9 | ColumnntnQosTBParamSessionId | read-create | current | A session identifier used to reference transitory (volatile) data. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.6.4.1.10 | ColumnntnQosTBParamVersion | read-create | current | Version indicator for ntnQosTBParamTable. |
| 1.3.6.1.4.1.45.4.7.1.6.4.1.11 | ColumnntnQosTBParamMinRate | read-create | current | The minimum token-bucket rate, in kilobits per second (kbps). Version 2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.6.5 | NodentnQosTBMeters | |||
| 1.3.6.1.4.1.45.4.7.1.6.5.1 | IdentityntnQosTBParamSimpleTokenBucket | current | Two Parameter Token Bucket Meter as described in the Informal Differentiated Services Model section 5.2.3. | |
| 1.3.6.1.4.1.45.4.7.1.6.5.2 | IdentityntnQosTBParamAvgRate | current | Average Rate Meter as described in the Informal Differentiated Services Model section 5.2.1. | |
| 1.3.6.1.4.1.45.4.7.1.6.5.3 | IdentityntnQosTBParamSrTCMBlind | current | Single Rate Three Color Marker Metering as defined by RFC 2697,in the `Color Blind' mode as described by the RFC. | |
| 1.3.6.1.4.1.45.4.7.1.6.5.4 | IdentityntnQosTBParamSrTCMAware | current | Single Rate Three Color Marker Metering as defined by RFC 2697,in the `Color Aware' mode as described by the RFC. | |
| 1.3.6.1.4.1.45.4.7.1.6.5.5 | IdentityntnQosTBParamTrTCMBlind | current | Two Rate Three Color Marker Metering as defined by RFC 2698, in the `Color Blind' mode as described by the RFC. | |
| 1.3.6.1.4.1.45.4.7.1.6.5.6 | IdentityntnQosTBParamTrTCMAware | current | Two Rate Three Color Marker Metering as defined by RFC 2698, in the `Color Aware' mode as described by the RFC. | |
| 1.3.6.1.4.1.45.4.7.1.6.5.7 | IdentityntnQosTBParamTswTCM | current | Time Sliding Window Three Color Marker Metering as defined by RFC 2859. | |
| 1.3.6.1.4.1.45.4.7.1.7 | NodentnQosActionClasses | |||
| 1.3.6.1.4.1.45.4.7.1.7.1 | ScalarntnQosBaseActionNextFree | read-only | current | This object contains an unused value for ntnQosBaseActionId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.7.2 | TablentnQosBaseActionTable | not-accessible | current | Contains the current set of configured base actions. The actions are associated with classifiers, meters and interfaces through policies during operation. |
| 1.3.6.1.4.1.45.4.7.1.7.2.1 | RowntnQosBaseActionEntry | not-accessible | current | General action definitions. Each entry specifies an instance of the ntnQosBaseAction class which describes (potentially) several distinct action attributes. Ea… |
| 1.3.6.1.4.1.45.4.7.1.7.2.1.1 | ColumnntnQosBaseActionId | not-accessible | current | An index that enumerates the QoS Base Action entries. Managers can obtain new index values for row creation in this table by reading ntnQosBaseActionNextFree. … |
| 1.3.6.1.4.1.45.4.7.1.7.2.1.2 | ColumnntnQosBaseActionDrop | read-create | current | This action attribute is used to specify whether a packet should dropped, switched (i.e., not dropped) or whether the decision to drop the packet should be def… |
| 1.3.6.1.4.1.45.4.7.1.7.2.1.3 | ColumnntnQosBaseActionUpdateDscp | read-create | current | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram to be updated with… |
| 1.3.6.1.4.1.45.4.7.1.7.2.1.4 | ColumnntnQosBaseActionUpdateUserPriority | read-create | current | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated based on the value of this o… |
| 1.3.6.1.4.1.45.4.7.1.7.2.1.5 | ColumnntnQosBaseActionSetDropPrecedence | read-create | current | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop pr… |
| 1.3.6.1.4.1.45.4.7.1.7.2.1.6 | ColumnntnQosBaseActionCopyToCpu | read-create | current | This action attribute, when specified, has the ability to cause the packet being evaluated to be sent to the CPU for further processing. Extreme care should be… |
| 1.3.6.1.4.1.45.4.7.1.7.2.1.7 | ColumnntnQosBaseActionMirrorFrame | read-create | current | This action attribute, when specified, will cause the packet being evaluated to be sent to a predefined egress port for transmission in addition to the normal … |
| 1.3.6.1.4.1.45.4.7.1.7.2.1.8 | ColumnntnQosBaseActionExtension | read-create | current | Identifies an entry in an auxiliary action table containing additional actions to be performed on/applied to identified traffic. Entries are referenced using a… |
| 1.3.6.1.4.1.45.4.7.1.7.2.1.9 | ColumnntnQosBaseActionLabel | read-create | current | A label used to reference the action entry in a textual manner. |
| 1.3.6.1.4.1.45.4.7.1.7.2.1.10 | ColumnntnQosBaseActionStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.7.2.1.11 | ColumnntnQosBaseActionStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. |
| 1.3.6.1.4.1.45.4.7.1.7.2.1.12 | ColumnntnQosBaseActionSessionId | read-create | current | A session identifier used to reference transitory (volatile) data. |
| 1.3.6.1.4.1.45.4.7.1.7.3 | ScalarntnQosIfcActionNextFree | read-only | current | This object contains an unused value for ntnQosIfcActionId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.7.4 | TablentnQosIfcActionTable | not-accessible | current | Contains the current set of configured interface actions. The actions are associated with classifiers, meters and interfaces through policies during operation … |
| 1.3.6.1.4.1.45.4.7.1.7.4.1 | RowntnQosIfcActionEntry | not-accessible | current | Interface action definitions. Each entry specifies an instance of the ntnQosIfcAction class which describes (potentially) several distinct action attributes. E… |
| 1.3.6.1.4.1.45.4.7.1.7.4.1.1 | ColumnntnQosIfcActionId | not-accessible | current | An index that enumerates the QoS Interface Action entries. Managers can obtain new index values for row creation in this table by reading ntnQosIfcActionNextFr… |
| 1.3.6.1.4.1.45.4.7.1.7.4.1.2 | ColumnntnQosIfcActionUpdateVlanId | read-create | current | This action attribute, when specified, will cause the Vlan Id in the frame being processed to be updated using the specified value. The Vlan Id value will not … |
| 1.3.6.1.4.1.45.4.7.1.7.4.1.3 | ColumnntnQosIfcActionSetEgressMask | read-create | current | This action component, when specified, will cause the potential list of egress interfaces for a given packet to be limited to those interfaces that are include… |
| 1.3.6.1.4.1.45.4.7.1.7.4.1.4 | ColumnntnQosIfcActionSetEgressUcastIfc | read-create | current | This action attribute supports redirection of normally-switched, known unicast packets to a specific interface. An egress interface is identified for redirecti… |
| 1.3.6.1.4.1.45.4.7.1.7.4.1.5 | ColumnntnQosIfcActionSetEgressNUcastIfc | read-create | current | This action attribute supports redirection of normally-switched non-unicast (includes broadcast, multicast and flooded/unknown unicast) packets to a specific i… |
| 1.3.6.1.4.1.45.4.7.1.7.4.1.6 | ColumnntnQosIfcActionExtension | read-create | current | Identifies an entry in an auxiliary action table containing additional actions to be performed on/applied to identified traffic. Entries are referenced using a… |
| 1.3.6.1.4.1.45.4.7.1.7.4.1.7 | ColumnntnQosIfcActionLabel | read-create | current | A label used to reference the action entry in a textual manner. |
| 1.3.6.1.4.1.45.4.7.1.7.4.1.8 | ColumnntnQosIfcActionStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.7.4.1.9 | ColumnntnQosIfcActionStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. |
| 1.3.6.1.4.1.45.4.7.1.7.4.1.10 | ColumnntnQosIfcActionSessionId | read-create | current | A session identifier used to reference transitory (volatile) data. |
| 1.3.6.1.4.1.45.4.7.1.8 | NodentnQosPolicyClasses | |||
| 1.3.6.1.4.1.45.4.7.1.8.1 | ScalarntnQosPolicyNextFree | read-only | current | This object contains an unused value for ntnQosPolicyId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.8.2 | TablentnQosPolicyTable | not-accessible | current | A policy class that applies a set of classifiers to interfaces specifying, for each association, the precedence order of the classifier with respect to other c… |
| 1.3.6.1.4.1.45.4.7.1.8.2.1 | RowntnQosPolicyEntry | not-accessible | current | An instance of the ntnQosPolicy class. Instance creation may be prohibited based on the status of certain class attributes which must exist prior to class inst… |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.1 | ColumnntnQosPolicyId | not-accessible | current | An index that enumerates the QoS Policy entries. Managers can obtain new index values for row creation in this table by reading ntnQosPolicyNextFree. Version 1… |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.2 | ColumnntnQosPolicyClassifierType | read-create | current | The type of classification resources that are being referenced by this QoS policy. This classifier type indication, together with the corresponding ntnQosPolic… |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.3 | ColumnntnQosPolicyClassifierId | read-create | current | This attribute identifies the classification data that is associated with this policy. It identifies either an individual classifier or a block of classifiers,… |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.4 | ColumnntnQosPolicyInterfaceRoles | read-create | current | The interfaces to which this policy applies, specified in terms of a set of roles. The role combination specified by this attribute must exist in the ntnQosInt… |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.5 | ColumnntnQosPolicyPrecedence | read-create | current | The relative order in which the classifier elements associated with this policy are applied, with regard to other classifiers applied to the same group of inte… |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.6 | ColumnntnQosPolicyMeter | read-create | current | This attribute identifies the meter that is associated with this QoS Policy instance. Meters are specified in the ntnQosMeterTable and associated tables. The c… |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.7 | ColumnntnQosPolicyAction | read-create | current | This attribute identifies the action that is to be initiated for flows that are not being metered and that match the classification criteria specified via the … |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.8 | ColumnntnQosPolicyNonMatchAction | read-create | current | This attribute identifies the action that is to be initiated for flows that do not match the classification criteria being applied to the flow. Actions must be… |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.9 | ColumnntnQosPolicyLabel | read-create | current | A label used to reference the QoS policy entry in a textual manner. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.10 | ColumnntnQosPolicyStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.11 | ColumnntnQosPolicyStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.12 | ColumnntnQosPolicyStats | read-create | current | Identifies an entry in the Count Action Table (ntnQosCountActTable) that is used to accumulate statistics related to traffic processed based on this policy dat… |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.13 | ColumnntnQosPolicyStatsType | read-create | current | The type of statistics tracking used by this QoS policy. The value of this attribute dictates the amount of statistics tracking resources (i.e., counters) cons… |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.14 | ColumnntnQosPolicyInterfaceIndex | read-create | current | An ifIndex value that is used to identify an interface to which the policy is to be applied. A policy is associated with an interface explicitly using this att… |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.15 | ColumnntnQosPolicySessionId | read-create | current | A session identifier used to reference transitory (volatile) data. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.16 | ColumnntnQosPolicyVersion | read-create | current | Version indicator for ntnQosPolicyTable. |
| 1.3.6.1.4.1.45.4.7.1.8.2.1.17 | ColumnntnQosPolicyMeteringMode | read-only | current | Identifies the metering mode associated with the policy. A value of 'noMetering(1)' indicates that metering is not associated with this policy. A 'policyBasedM… |
| 1.3.6.1.4.1.45.4.7.1.8.3 | ScalarntnQosCountActNextFree | read-only | current | This object contains an unused value for ntnQosCountActId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.8.4 | TablentnQosCountActTable | not-accessible | current | This table contains counters for all the traffic passing through a processing element. |
| 1.3.6.1.4.1.45.4.7.1.8.4.1 | RowntnQosCountActEntry | not-accessible | current | An entry in the count action table describes a single set of traffic counters. |
| 1.3.6.1.4.1.45.4.7.1.8.4.1.1 | ColumnntnQosCountActId | not-accessible | current | An index that enumerates the Count Action entries. Managers can obtain new index values for row creation in this table by reading ntnQosCountActNextFree. |
| 1.3.6.1.4.1.45.4.7.1.8.4.1.2 | ColumnntnQosCountActOctets | read-only | current | The number of octets processed by the associated data path element (e.g., policy, meter). |
| 1.3.6.1.4.1.45.4.7.1.8.4.1.3 | ColumnntnQosCountActPkts | read-only | current | The number of packets processed by the associated data path element (e.g., policy, meter). |
| 1.3.6.1.4.1.45.4.7.1.8.4.1.4 | ColumnntnQosCountActStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.8.4.1.5 | ColumnntnQosCountActStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. |
| 1.3.6.1.4.1.45.4.7.1.8.4.1.6 | ColumnntnQosCountActSessionId | read-create | current | A session identifier used to reference transitory (volatile) data. |
| 1.3.6.1.4.1.45.4.7.1.8.5 | TablentnQosFilterStatsTable | not-accessible | current | This table contains counters for all the traffic passing through a processing element at the policy/filter level. |
| 1.3.6.1.4.1.45.4.7.1.8.5.1 | RowntnQosFilterStatsEntry | not-accessible | current | An entry in the filter statistics table describes a single set of traffic counters for a specific policy/filter/interface combination. |
| 1.3.6.1.4.1.45.4.7.1.8.5.1.1 | ColumnntnQosFilterStatsPolicyId | not-accessible | current | An index component that identifies the policy associated with this Filter Statistics entry. This attribute has the same value as the ntnQosPolicyId attribute w… |
| 1.3.6.1.4.1.45.4.7.1.8.5.1.2 | ColumnntnQosFilterStatsFilterId | not-accessible | current | An index component that identifies the filter instance within a specific policy (as identified by the ntnQosFilterStatsPolicyId attribute) that is associated w… |
| 1.3.6.1.4.1.45.4.7.1.8.5.1.3 | ColumnntnQosFilterStatsInterfaceId | not-accessible | current | An index component that identifies the interface index referenced by the specific policy (as identified by the ntnQosFilterStatsPolicyId attribute) that is ass… |
| 1.3.6.1.4.1.45.4.7.1.8.5.1.4 | ColumnntnQosFilterStatsInProfileOctets | read-only | current | The number of octets considered to be in-profile that have been processed by the associated data path classifier. |
| 1.3.6.1.4.1.45.4.7.1.8.5.1.5 | ColumnntnQosFilterStatsInProfilePkts | read-only | current | The number of packets considered to be in-profile that have been processed by the associated data path classifier. |
| 1.3.6.1.4.1.45.4.7.1.8.5.1.6 | ColumnntnQosFilterStatsOutOfProfileOctets | read-only | current | The number of octets considered to be out-of-profile that have been processed by the associated data path classifier. |
| 1.3.6.1.4.1.45.4.7.1.8.5.1.7 | ColumnntnQosFilterStatsOutOfProfilePkts | read-only | current | The number of packets considered to be out-of-profile that have been processed by the associated data path classifier. |
| 1.3.6.1.4.1.45.4.7.1.8.5.1.8 | ColumnntnQosFilterStatsStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.8.5.1.9 | ColumnntnQosFilterStatsStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. |
| 1.3.6.1.4.1.45.4.7.1.8.6 | TablentnQosPolicyDiagsTable | not-accessible | current | This table contains attributes used to track the current level of hardware resource consumption related to installed policy data on an interface. |
| 1.3.6.1.4.1.45.4.7.1.8.6.1 | RowntnQosPolicyDiagsEntry | not-accessible | current | An entry in the QoS policy diagnostics table describes a single set of resource utilization data, related to installed policy data and non-policy data that sti… |
| 1.3.6.1.4.1.45.4.7.1.8.6.1.1 | ColumnntnQosPolicyDiagsMasksConsumed | read-only | current | Tracks the current number of classification masks in-use, due to installed policy and filter data, for a given interface. |
| 1.3.6.1.4.1.45.4.7.1.8.6.1.2 | ColumnntnQosPolicyDiagsFiltersConsumed | read-only | current | Tracks the current number of filters (i.e., rules) in-use, due to installed filter data, for a given interface. |
| 1.3.6.1.4.1.45.4.7.1.8.6.1.3 | ColumnntnQosPolicyDiagsMetersConsumed | read-only | current | Tracks the current number of meters in-use, due to installed policy data, for a given interface. |
| 1.3.6.1.4.1.45.4.7.1.8.6.1.4 | ColumnntnQosPolicyDiagsNonQosMasksConsumed | read-only | current | Tracks the current number of classification masks in-use, not due to installed policy and filter data, for a given interface. |
| 1.3.6.1.4.1.45.4.7.1.8.6.1.5 | ColumnntnQosPolicyDiagsNonQosFiltersConsumed | read-only | current | Tracks the current number of filters (i.e., rules) in-use, not due to installed filter data, for a given interface. |
| 1.3.6.1.4.1.45.4.7.1.8.6.1.6 | ColumnntnQosPolicyDiagsNonQosMetersConsumed | read-only | current | Tracks the current number of meters in-use, not due to installed policy data, for a given interface. |
| 1.3.6.1.4.1.45.4.7.1.8.6.1.7 | ColumnntnQosPolicyDiagsCountersConsumed | read-only | current | Tracks the current number of counters in-use for a given interface. |
| 1.3.6.1.4.1.45.4.7.1.8.6.1.8 | ColumnntnQosPolicyDiagsTotalMasksAvail | read-only | current | Tracks the total number of classification masks available for a given interface. |
| 1.3.6.1.4.1.45.4.7.1.8.6.1.9 | ColumnntnQosPolicyDiagsTotalFiltersAvail | read-only | current | Tracks the total number of filters (i.e., rules) available for a given interface. |
| 1.3.6.1.4.1.45.4.7.1.8.6.1.10 | ColumnntnQosPolicyDiagsTotalMetersAvail | read-only | current | Tracks the total number of meters available for a given interface. |
| 1.3.6.1.4.1.45.4.7.1.8.6.1.11 | ColumnntnQosPolicyDiagsTotalCountersAvail | read-only | current | Tracks the total number of counters available for a given interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7 | TablentnQosPolicyPrecResDiagsTable | not-accessible | current | This table contains attributes used to track the current level of hardware resource consumption related to installed policy data for a given precedence level a… |
| 1.3.6.1.4.1.45.4.7.1.8.7.1 | RowntnQosPolicyPrecResDiagsEntry | not-accessible | current | An entry in the QoS policy precedence resource diagnostics table describes a single set of resource utilization data, related to installed policy data and non-… |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.1 | ColumnntnQosPolicyPrecResDiagsPrec | not-accessible | current | The precedence value for which resource data is being returned. In a centralized architecture, a specific precedence value is typically associated with a bank … |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.2 | ColumnntnQosPolicyPrecResDiagsInterface | not-accessible | current | The ifIndex value that is associated with this instance of the ntnQosPolicyPrecResDiagsEntry. The ifIndex value of this attribute corresponds to the ifTable en… |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.3 | ColumnntnQosPolicyPrecResDiagsKeysConsumed | read-only | current | Tracks the current number of classification keys in-use, due to installed policy and filter data, for a given precedence level and interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.4 | ColumnntnQosPolicyPrecResDiagsFiltersConsumed | read-only | current | Tracks the current number of filters (i.e., rules) in-use, due to installed filter data, for a given precedence level and interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.5 | ColumnntnQosPolicyPrecResDiagsMetersConsumed | read-only | current | Tracks the current number of meters in-use, due to installed policy data, for a given precedence level and interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.6 | ColumnntnQosPolicyPrecResDiagsNonQosKeysConsumed | read-only | current | Tracks the current number of classification keys in-use, not due to installed policy and filter data, for a given precedence level and interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.7 | ColumnntnQosPolicyPrecResDiagsNonQosFiltersConsumed | read-only | current | Tracks the current number of filters (i.e., rules) in-use, not due to installed filter data, for a given precedence level and interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.8 | ColumnntnQosPolicyPrecResDiagsNonQosMetersConsumed | read-only | current | Tracks the current number of meters in-use, not due to installed policy data, for a given precedence level and interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.9 | ColumnntnQosPolicyPrecResDiagsCountersConsumed | read-only | current | Tracks the current number of counters in-use for a given precedence level and interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.10 | ColumnntnQosPolicyPrecResDiagsTotalKeysAvail | read-only | current | Tracks the total number of classification keys available for a given precedence level and interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.11 | ColumnntnQosPolicyPrecResDiagsTotalFiltersAvail | read-only | current | Tracks the total number of filters (i.e., rules) available for a given precedence level and interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.12 | ColumnntnQosPolicyPrecResDiagsTotalMetersAvail | read-only | current | Tracks the total number of meters available for a given precedence level and interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.13 | ColumnntnQosPolicyPrecResDiagsTotalCountersAvail | read-only | current | Tracks the total number of counters available for a given precedence level and interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.14 | ColumnntnQosPolicyPrecResDiagsRangeChkElemsConsumed | read-only | current | Tracks the number of range check elements currently consumed for a given precedence level and interface. Note that range check resources may be centrally alloc… |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.15 | ColumnntnQosPolicyPrecResDiagsApplicationIdUsed | read-only | current | Tracks the Id of application in-use for a given precedence level and interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.16 | ColumnntnQosPolicyPrecResDiagsApplicationNameUsed | read-only | current | The name of application in-use for a given precedence level and interface. |
| 1.3.6.1.4.1.45.4.7.1.8.7.1.17 | ColumnntnQosPolicyPrecResDiagsRangeChkElemsAvail | read-only | current | Tracks the total number of range check elements available for a given port cluster. |
| 1.3.6.1.4.1.45.4.7.1.9 | NodentnQosInterfaceClasses | |||
| 1.3.6.1.4.1.45.4.7.1.9.1 | TablentnQosIfAssignmentTable | not-accessible | current | Contains interface index to interface role combination associations. |
| 1.3.6.1.4.1.45.4.7.1.9.1.1 | RowntnQosIfAssignmentEntry | not-accessible | current | A conceptual row in the ntnQosIfAssignmentTable. Each row identifies an interface value that corresponds to an entry in the ifTable (MIB-II) and a role combina… |
| 1.3.6.1.4.1.45.4.7.1.9.1.1.1 | ColumnntnQosIfAssignmentIfIndex | not-accessible | current | The ifIndex value that is associated with this instance of the ntnQosIfAssignmentEntry. The ifIndex value of this attribute must correspond to the ifTable entr… |
| 1.3.6.1.4.1.45.4.7.1.9.1.1.2 | ColumnntnQosIfAssignmentRoleCombination | read-create | current | The role combination that is associated with the interface with an ifIndex value that is equal to ntnQosIfAssignmentIfIndex. |
| 1.3.6.1.4.1.45.4.7.1.9.1.1.3 | ColumnntnQosIfAssignmentQueueSet | read-create | current | The queue set associated with this interface. A queue set must be defined in the ntnQosIfQueueTable prior to being referenced by this attribute. |
| 1.3.6.1.4.1.45.4.7.1.9.1.1.4 | ColumnntnQosIfAssignmentStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.9.1.1.5 | ColumnntnQosIfAssignmentStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.9.1.1.6 | ColumnntnQosIfAssignmentCapabilities | read-only | current | An enumeration of interface capabilities. Used by the PDP or network manager to select which policies and configuration it should push to the PEP. Also used to… |
| 1.3.6.1.4.1.45.4.7.1.9.2 | TablentnQosIfQueueTable | not-accessible | current | Contains information about the individual queues that comprise a queue set implemented on the device. |
| 1.3.6.1.4.1.45.4.7.1.9.2.1 | RowntnQosIfQueueEntry | not-accessible | current | A conceptual row in the ntnQosIfQueueTable. Each row identifies a specific queue within a given queue set and contains detailed information about the queue. Qu… |
| 1.3.6.1.4.1.45.4.7.1.9.2.1.1 | ColumnntnQosIfQueueId | not-accessible | current | An index that uniquely identifies an entry in the ntnQosIfQueueTable. |
| 1.3.6.1.4.1.45.4.7.1.9.2.1.2 | ColumnntnQosIfQueueSetId | read-create | current | An index that uniquely identifies a specific queue set. The queue set that is identified with this value is associated with an interface through the ntnQosIfAs… |
| 1.3.6.1.4.1.45.4.7.1.9.2.1.3 | ColumnntnQosIfQueueIndex | read-create | current | An arbitrary index that uniquely identifies a specific queue within a set of queues that is identified by the ntnQosIfQueueSetId value. |
| 1.3.6.1.4.1.45.4.7.1.9.2.1.4 | ColumnntnQosIfQueueDiscipline | read-create | current | This object identifies the queuing discipline that is associated with the specified queue. A value of fifo(1) indicates that the queue is serviced on a first-i… |
| 1.3.6.1.4.1.45.4.7.1.9.2.1.5 | ColumnntnQosIfQueueDrainSize | read-create | current | The maximum number of bytes that may be drained from the queue in one cycle. The percentage of the interface bandwidth allocated to this queue can be calculate… |
| 1.3.6.1.4.1.45.4.7.1.9.2.1.6 | ColumnntnQosIfQueueAbsBandwidth | read-create | current | The maximum interface bandwidth that is available for consumption when servicing this queue. This bandwidth is specified in terms of kilobits per second. This … |
| 1.3.6.1.4.1.45.4.7.1.9.2.1.7 | ColumnntnQosIfQueueBandwidthAllocation | read-create | current | This attribute specifies whether to configure the queue for an absolute bandwidth limit or one that is relative to other queues of the interface. i.e., whether… |
| 1.3.6.1.4.1.45.4.7.1.9.2.1.8 | ColumnntnQosIfQueueServiceOrder | read-create | current | This object is used to provide an additional level of priority that is required for certain queuing disciplines and when the different queues that comprise a q… |
| 1.3.6.1.4.1.45.4.7.1.9.2.1.9 | ColumnntnQosIfQueueSize | read-create | current | The size of the queue in bytes. Some devices set queue size in terms of packets. These devices must calculate the queue size in packets by assuming an average … |
| 1.3.6.1.4.1.45.4.7.1.9.2.1.10 | ColumnntnQosIfQueueStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.9.2.1.11 | ColumnntnQosIfQueueStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.9.3 | ScalarntnQosInterfaceRoleNextFree | read-only | current | This object contains an unused value for ntnQosInterfaceRoleId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.9.4 | TablentnQosInterfaceRoleTable | not-accessible | current | Interface role definitions. This class describes the interface roles that exist on the device. An interface role is denoted by its designated role identifier. |
| 1.3.6.1.4.1.45.4.7.1.9.4.1 | RowntnQosInterfaceRoleEntry | not-accessible | current | An instance of this class describes the characteristics of an interface role. Interface role characteristics include a role identifier, an interface class desi… |
| 1.3.6.1.4.1.45.4.7.1.9.4.1.1 | ColumnntnQosInterfaceRoleId | not-accessible | current | An arbitrary integer index that uniquely identifies a instance of the ntnQosInterfaceRole class. Class instances may not be contiguous. |
| 1.3.6.1.4.1.45.4.7.1.9.4.1.2 | ColumnntnQosInterfaceRoleRole | read-create | current | The role that is used to identify interfaces with the characteristics specified by the attributes of this class instance. Interface role combination identifier… |
| 1.3.6.1.4.1.45.4.7.1.9.4.1.3 | ColumnntnQosInterfaceRoleIfClass | read-create | current | A value describing the overall classification of traffic received on interfaces with the given role. Traffic received on trusted interfaces may be processed di… |
| 1.3.6.1.4.1.45.4.7.1.9.4.1.4 | ColumnntnQosInterfaceRoleCapabilities | read-create | current | An enumeration of interface capabilities. Used by the PDP or network manager to select which policies and configuration it should push to the PEP. |
| 1.3.6.1.4.1.45.4.7.1.9.4.1.5 | ColumnntnQosInterfaceRoleStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.9.4.1.6 | ColumnntnQosInterfaceRoleStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.9.4.1.7 | ColumnntnQosInterfaceRoleStatsTrackingType | read-write | current | The value of this attribute determines if statistics tracking is enabled for system-level policies associated with the designated role. The ntnQosConfigTrackSt… |
| 1.3.6.1.4.1.45.4.7.1.9.5 | TablentnQosUserRoleTable | not-accessible | current | User role definitions. This class describes the user roles that exist on the device. User roles associate a user and role with a single interface. |
| 1.3.6.1.4.1.45.4.7.1.9.5.1 | RowntnQosUserRoleEntry | not-accessible | current | An instance of this class describes the characteristics of an user role. User role characteristics include a role combination, a user and group name and user s… |
| 1.3.6.1.4.1.45.4.7.1.9.5.1.1 | ColumnntnQosUserRoleIfIndex | not-accessible | current | The ifIndex value that is associated with this instance of the ntnQosUserRoleEntry. The ifIndex value of this attribute must correspond to an ifTable entry wit… |
| 1.3.6.1.4.1.45.4.7.1.9.5.1.2 | ColumnntnQosUserRoleRoleCombination | read-create | current | The role combination that is associated with the interface with an ifIndex value that is equal to ntnQosUserRoleIfIndex and the user identified by the ntnQosUs… |
| 1.3.6.1.4.1.45.4.7.1.9.5.1.3 | ColumnntnQosUserRoleUserName | read-create | current | The user name identifying the user that is currently associated with this user role (i.e., ifIndex and role combination) information. |
| 1.3.6.1.4.1.45.4.7.1.9.5.1.4 | ColumnntnQosUserRoleUserGroup | read-create | current | The user group with which the user, identified by the ntnQosUserRoleUserName attribute, is associated. |
| 1.3.6.1.4.1.45.4.7.1.9.5.1.5 | ColumnntnQosUserRoleSessionId | read-only | current | The system-assigned session identifier used to track instances of this user role entry (i.e., the user role entry for a specific interface and user). |
| 1.3.6.1.4.1.45.4.7.1.9.5.1.6 | ColumnntnQosUserRoleSessionStart | read-only | current | The system-assigned session start timestamp. The value of this attribute corresponds to the value of the sysUpTime attribute, coverted to seconds, at the insta… |
| 1.3.6.1.4.1.45.4.7.1.9.5.1.7 | ColumnntnQosUserRoleSessionGroup | read-only | current | The system-assigned session group identifier. Multiple user sessions belong to the same group if they share the same role combination and have the same value f… |
| 1.3.6.1.4.1.45.4.7.1.9.5.1.8 | ColumnntnQosUserRoleStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.9.5.1.9 | ColumnntnQosUserRoleStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.9.6 | TablentnQosIfShapingTable | not-accessible | current | Identifies shaping criteria that is to be applied to a specific interface. |
| 1.3.6.1.4.1.45.4.7.1.9.6.1 | RowntnQosIfShapingEntry | not-accessible | current | A conceptual row in the ntnQosIfShapingTable. Each row identifies an interface value that corresponds to an entry in the ifTable (MIB-II) and shaping criteria … |
| 1.3.6.1.4.1.45.4.7.1.9.6.1.1 | ColumnntnQosIfShapingIfIndex | not-accessible | current | The ifIndex value that is associated with this instance of the ntnQosIfShapingEntry. The ifIndex value of this attribute must correspond to the ifTable entry w… |
| 1.3.6.1.4.1.45.4.7.1.9.6.1.2 | ColumnntnQosIfShapingSpecific | read-create | current | This indicates the shaping behavior to be applied by pointing to an entry containing detailed parameters. Note that entries in that specific table must be mana… |
| 1.3.6.1.4.1.45.4.7.1.9.6.1.3 | ColumnntnQosIfShapingLabel | read-create | current | A label used to reference the interface shaping data in a textual manner. |
| 1.3.6.1.4.1.45.4.7.1.9.6.1.4 | ColumnntnQosIfShapingStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.9.6.1.5 | ColumnntnQosIfShapingStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.9.7 | TablentnQosCosShapingTable | not-accessible | current | Identifies shaping criteria that is to be applied to a specific interface's CoS queues. |
| 1.3.6.1.4.1.45.4.7.1.9.7.1 | RowntnQosCosShapingEntry | not-accessible | current | A conceptual row in the ntnQosCosShapingTable. Each row identifies an interface value that corresponds to an entry in the ifTable (MIB-II), a CoS value and sha… |
| 1.3.6.1.4.1.45.4.7.1.9.7.1.1 | ColumnntnQosCosShapingIfIndex | not-accessible | current | The ifIndex value that is associated with this instance of the ntnQosCosShapingEntry. The ifIndex value of this attribute must correspond to the ifTable entry … |
| 1.3.6.1.4.1.45.4.7.1.9.7.1.2 | ColumnntnQosCosShapingCos | not-accessible | current | The IEEE 802 CoS value that is associated with this instance of the ntnQosCosShapingEntry. |
| 1.3.6.1.4.1.45.4.7.1.9.7.1.3 | ColumnntnQosCosShapingSpecific | read-create | current | This indicates the shaping behavior to be applied by pointing to an entry containing detailed parameters. Note that entries in that specific table must be mana… |
| 1.3.6.1.4.1.45.4.7.1.9.7.1.4 | ColumnntnQosCosShapingLabel | read-create | current | A label used to reference the CoS shaping data in a textual manner. |
| 1.3.6.1.4.1.45.4.7.1.9.7.1.5 | ColumnntnQosCosShapingStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.9.7.1.6 | ColumnntnQosCosShapingStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.9.8 | TablentnQosQueueShapingTable | not-accessible | current | Identifies shaping criteria that is to be applied to a specific interface's egress queues. |
| 1.3.6.1.4.1.45.4.7.1.9.8.1 | RowntnQosQueueShapingEntry | not-accessible | current | A conceptual row in the ntnQosQueueShapingTable. Each row identifies an interface value that corresponds to an entry in the ifTable (MIB-II), a queue identifie… |
| 1.3.6.1.4.1.45.4.7.1.9.8.1.1 | ColumnntnQosQueueShapingIfIndex | not-accessible | current | The ifIndex value that is associated with this instance of the ntnQosQueueShapingEntry. The ifIndex value of this attribute must correspond to the ifTable entr… |
| 1.3.6.1.4.1.45.4.7.1.9.8.1.2 | ColumnntnQosQueueShapingQueue | not-accessible | current | The specific queue, within the queue set that is associated with the interface identified by the ntnQosQueueShapingIfIndex value, on which traffic is to be sha… |
| 1.3.6.1.4.1.45.4.7.1.9.8.1.3 | ColumnntnQosQueueShapingSpecific | read-create | current | This indicates the shaping behavior to be applied by pointing to an entry containing detailed parameters. Note that entries in that specific table must be mana… |
| 1.3.6.1.4.1.45.4.7.1.9.8.1.4 | ColumnntnQosQueueShapingLabel | read-create | current | A label used to reference the queue shaping data in a textual manner. |
| 1.3.6.1.4.1.45.4.7.1.9.8.1.5 | ColumnntnQosQueueShapingStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.9.8.1.6 | ColumnntnQosQueueShapingStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.10 | NodentnQosMappingClasses | |||
| 1.3.6.1.4.1.45.4.7.1.10.1 | TablentnQosDscpToCosTable | not-accessible | current | Maps each DSCP to an IEEE COS value. |
| 1.3.6.1.4.1.45.4.7.1.10.1.1 | RowntnQosDscpToCosEntry | not-accessible | current | An instance of the ntnQosDscpToCos class. A total of 64 class instances are constantly maintained (i.e., entries may be modified but not added or deleted) in t… |
| 1.3.6.1.4.1.45.4.7.1.10.1.1.1 | ColumnntnQosDscpToCosId | not-accessible | current | A unique identifier for this DSCP-to-COS mapping. |
| 1.3.6.1.4.1.45.4.7.1.10.1.1.2 | ColumnntnQosDscpToCosDscp | read-create | current | The DSCP attribute that is used to determine the appropriate Layer 2 COS value for mapping purposes. DSCP values 0 through 63 (inclusive) are maintained in the… |
| 1.3.6.1.4.1.45.4.7.1.10.1.1.3 | ColumnntnQosDscpToCosCos | read-create | current | The IEEE 802 COS value to use when mapping the DSCP value specified by the ntnQosDscpToCosDscp attribute to a IEEE 802 COS. |
| 1.3.6.1.4.1.45.4.7.1.10.1.1.4 | ColumnntnQosDscpToCosDropPrec | read-create | current | The relative drop precedence value to use when mapping the DSCP value specified by the ntnQosDscpToCosDscp attribute to a drop precedence. During times of cong… |
| 1.3.6.1.4.1.45.4.7.1.10.1.1.5 | ColumnntnQosDscpToCosLabel | read-create | current | A label used to logically identify the mapping. |
| 1.3.6.1.4.1.45.4.7.1.10.1.1.6 | ColumnntnQosDscpToCosStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.10.1.1.7 | ColumnntnQosDscpToCosStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.10.1.1.8 | ColumnntnQosDscpToCosNewDscp | read-create | current | Specifies a new DSCP value to be used when DSCP mutation (i.e., translation) is required. |
| 1.3.6.1.4.1.45.4.7.1.10.2 | TablentnQosCosToDscpTable | not-accessible | current | Maps each of eight Layer 2 COS values to a DSCP. |
| 1.3.6.1.4.1.45.4.7.1.10.2.1 | RowntnQosCosToDscpEntry | not-accessible | current | An instance of the ntnQosCosToDscp class. A total of 8 class instances are constantly maintained (i.e., entries may be modified but not added or deleted) in th… |
| 1.3.6.1.4.1.45.4.7.1.10.2.1.1 | ColumnntnQosCosToDscpId | not-accessible | current | A unique identifier for this COS-to-DSCP mapping. |
| 1.3.6.1.4.1.45.4.7.1.10.2.1.2 | ColumnntnQosCosToDscpCos | read-create | current | The Layer 2 COS class instance attribute that is used to determine the appropriate DSCP mappings. COS values 0 through 7 (inclusive) are maintained in the tabl… |
| 1.3.6.1.4.1.45.4.7.1.10.2.1.3 | ColumnntnQosCosToDscpDscp | read-create | current | The DSCP value to use when mapping the Layer 2 COS value specified by the ntnQosCosToDscpCos attribute to a DSCP. |
| 1.3.6.1.4.1.45.4.7.1.10.2.1.4 | ColumnntnQosCosToDscpLabel | read-create | current | A label used to logically identify the mapping. |
| 1.3.6.1.4.1.45.4.7.1.10.2.1.5 | ColumnntnQosCosToDscpStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.10.2.1.6 | ColumnntnQosCosToDscpStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.10.3 | NodentnQosMappingClassesScalars | |||
| 1.3.6.1.4.1.45.4.7.1.10.3.1 | ScalarntnQosMappingRestoreDefault | read-write | current | The object is used to restore factory default values for the ntnQosDscpToCosTable and the ntnQosCosToDscpTable. Setting the object to dscpToCos(2) will restore… |
| 1.3.6.1.4.1.45.4.7.1.10.3.2 | ScalarntnQosMappingDscpToCosEnabled | read-write | current | This object controls whether the ntnQosDscpToCosTable is enabled. If the value is false(2), any configuration in that table will be ignored. |
| 1.3.6.1.4.1.45.4.7.1.10.3.3 | ScalarntnQosMappingCosToDscpEnabled | read-write | current | This object controls whether the ntnQosCosToDscpTable is enabled. If the value is false(2), any configuration in that table will be ignored. |
| 1.3.6.1.4.1.45.4.7.1.11 | NodentnQosPolicyAgtClasses | |||
| 1.3.6.1.4.1.45.4.7.1.11.1 | TablentnQosPrcSupportTable | not-accessible | current | Each instance of this class specifies a PRC that the device supports and a bit string to indicate the attributes of the class that are supported. |
| 1.3.6.1.4.1.45.4.7.1.11.1.1 | RowntnQosPrcSupportEntry | not-accessible | current | An instance of the ntnQosPrcSupport class that identifies a specific policy class and associated attributes as supported by the device. |
| 1.3.6.1.4.1.45.4.7.1.11.1.1.1 | ColumnntnQosPrcSupportId | not-accessible | current | An arbitrary integer index that uniquely identifies an instance of the ntnQosPrcSupport class. |
| 1.3.6.1.4.1.45.4.7.1.11.1.1.2 | ColumnntnQosPrcSupportSupportedPrc | read-only | current | The object identifier of a supported PRC. There may not be more than one instance of the ntnQosPrcSupport class with the same value of ntnQosPrcSupportSupporte… |
| 1.3.6.1.4.1.45.4.7.1.11.1.1.3 | ColumnntnQosPrcSupportSupportedAttrs | read-only | current | A bit string representing the supported attributes of the class that is identified by the ntnQosPrcSupportSupportedPrc object. Each bit of this bit mask corres… |
| 1.3.6.1.4.1.45.4.7.1.11.1.1.4 | ColumnntnQosPrcSupportMaxPris | read-only | current | A non-negative value indicating the maximum numbers of policy rule instances that can be installed in the identified policy rule class. Note that actual number… |
| 1.3.6.1.4.1.45.4.7.1.11.1.1.5 | ColumnntnQosPrcSupportCurrentPris | read-only | current | The current numbers of class instances. |
| 1.3.6.1.4.1.45.4.7.1.11.2 | TablentnQosPolicyDeviceIdentTable | not-accessible | current | This class contains a single policy rule instance that contains device-specific information. |
| 1.3.6.1.4.1.45.4.7.1.11.2.1 | RowntnQosPolicyDeviceIdentEntry | not-accessible | current | An instance of the ntnQosPolicyDeviceIdent class. Only one instance of this policy class is ever instantiated. |
| 1.3.6.1.4.1.45.4.7.1.11.2.1.1 | ColumnntnQosPolicyDeviceIdentId | not-accessible | current | An index to uniquely identify an instance of this policy class. |
| 1.3.6.1.4.1.45.4.7.1.11.2.1.2 | ColumnntnQosPolicyDeviceIdentDescr | read-only | current | A textual description of the policy agent. This value should include the name and version identification of the policy agent hardware and software. |
| 1.3.6.1.4.1.45.4.7.1.11.2.1.3 | ColumnntnQosPolicyDeviceIdentMaxMsg | read-only | current | The maximum message size, in octets, that the device is capable of processing. |
| 1.3.6.1.4.1.45.4.7.1.11.3 | ScalarntnQosConfigResetToDefaults | read-write | current | All installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this object to 'true(1)'. The value '… |
| 1.3.6.1.4.1.45.4.7.1.11.4 | ScalarntnQosConfigTrackStatistics | read-write | current | The value of this attribute determines if statistics tracking is enabled for system-level policies. System-level policies are created to enforce the default Qo… |
| 1.3.6.1.4.1.45.4.7.1.11.5 | ScalarntnQosConfigNVCommitDelay | read-write | current | Specifies the maximum amount of time, in seconds, before non-volatile QoS configuration data will be written to non-volatile storage. Delaying NV access can be… |
| 1.3.6.1.4.1.45.4.7.1.11.6 | ScalarntnQosConfigDefaultQueueCfg | read-write | current | The value of this attribute determines the queue set that is associated with all egress interfaces by default. A queue set is characterized by the number of qu… |
| 1.3.6.1.4.1.45.4.7.1.11.7 | ScalarntnQosConfigDefaultBufferingCaps | read-write | current | The value of this attribute determines the method through which buffering resources are allocated to ports sharing a pool of buffers. The buffering resources a… |
| 1.3.6.1.4.1.45.4.7.1.11.8 | ScalarntnQosConfigUBPSupportLevel | read-write | current | Determines whether QoS Agent User Based Policy (UBP) support is enabled and, if so, what level of support is enabled. Setting the value of this attribute to 'u… |
| 1.3.6.1.4.1.45.4.7.1.11.9 | ScalarntnQosConfigRoleAssocCompatLevel | read-write | current | Determines whether interface role associations are subject to loose or strict capabilities verification. Setting the value of this attribute to 'roleAssocCompa… |
| 1.3.6.1.4.1.45.4.7.1.11.10 | ScalarntnQosConfigDappEnable | read-write | current | Dictates whether the DoS Attack Prevention Package (DAPP) is enabled on all applicable ports and, when enabled, if resources will be allocated to track and rep… |
| 1.3.6.1.4.1.45.4.7.1.11.11 | ScalarntnQosConfigDappMinTcpHdrSize | read-write | current | DAPP minimum TCP header length allowed. Used when performing TCP fragment validation. IPv4 TCP first fragment packets will be dropped if the TCP header (IP pay… |
| 1.3.6.1.4.1.45.4.7.1.11.12 | ScalarntnQosConfigDappIpv4IcmpMaxLength | read-write | current | DAPP maximum IPv4 ICMP length. Used when performing ICMP validation. IPv4 ICMP packets will be dropped if the length (IP payload) exceeds this value. |
| 1.3.6.1.4.1.45.4.7.1.11.13 | ScalarntnQosConfigDappIpv6IcmpMaxLength | read-write | current | DAPP maximum IPv6 ICMP length. Used when performing ICMP validation. IPv6 ICMP packets will be dropped if the length exceeds this value. |
| 1.3.6.1.4.1.45.4.7.1.11.14 | ScalarntnQosConfigNtApplicationMode | read-write | current | Controls NT Application Mode processing. When enabled, identified NT application traffic will be given preferential treatment over non-NT application traffic. … |
| 1.3.6.1.4.1.45.4.7.1.11.15 | ScalarntnQosConfigQosOperMode | read-write | current | Controls overall QoS processing for the system. When enabled, all QoS functionality can be exercised by the user. When disabled, installed QoS components are t… |
| 1.3.6.1.4.1.45.4.7.1.11.16 | ScalarntnQosConfigTrustedProcessingMode | read-write | current | Controls filter usage related to Trusted interface class processing on platforms using filters to support treating traffic as trusted. A mode of 'partialDscpMa… |
| 1.3.6.1.4.1.45.4.7.1.11.17 | ScalarntnQosConfigResetToPartialDefaults | read-write | current | Most installed QoS policy state information can be deleted and reset to the device's default state by setting the value of this object to 'true(1)'. QoS data t… |
| 1.3.6.1.4.1.45.4.7.1.11.18 | ScalarntnQosConfigClearStats | read-write | current | All counters that are associated with QoS policies are reset to zero by setting the value of this object to 'true(1)'. The value 'false(2)' will always be retu… |
| 1.3.6.1.4.1.45.4.7.1.11.19 | ScalarntnQosConfigFcoeRedirOperMode | read-write | current | Controls the FCoE redirection service for the system. Enabling the service will initiate validation and possible reservation of the resources that are required… |
| 1.3.6.1.4.1.45.4.7.1.11.20 | ScalarntnQosConfigFcoeControllerMacAddr | read-write | current | The 802 MAC address of the FCoE Network Controller (FNC) that is used in conjunction with the FCoE redirection service. Must be defined prior to enabling the F… |
| 1.3.6.1.4.1.45.4.7.1.11.21 | ScalarntnQosConfigFcoeRedirAvail | read-write | current | Controls access to the FCoE Redirect functionality. A value of 'accessible(1)' indicates that the FCoE support can be accessed by an external FCoE Network Cont… |
| 1.3.6.1.4.1.45.4.7.1.11.22 | ScalarntnQosConfigFcoeControllerIfIndex | read-write | current | The interface index of the FCoE Network Controller (FNC) that is used in conjunction with the FCoE redirection service. Must be defined prior to enabling the F… |
| 1.3.6.1.4.1.45.4.7.1.11.23 | ScalarntnQosConfigFcoeControllerVlan | read-write | current | The VLAN associated with the FCoE Network Controller (FNC) that is used in conjunction with the FCoE redirection service. Must be defined prior to enabling the… |
| 1.3.6.1.4.1.45.4.7.1.12 | ScalarntnQosInterfaceTypeNextFree | read-only | current | This object contains an unused value for ntnQosInterfaceTypeId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.13 | NodentnQosApplicationClasses | |||
| 1.3.6.1.4.1.45.4.7.1.13.1 | ScalarntnQosDsAccessElemNextFree | read-only | current | This object contains an unused value for ntnQosDsAccessElemId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.13.2 | TablentnQosDsAccessElemTable | not-accessible | current | A table of IP access elements that a system may use to identify and manipulate IP traffic. |
| 1.3.6.1.4.1.45.4.7.1.13.2.1 | RowntnQosDsAccessElemEntry | not-accessible | current | An IP access element entry describes a single filter and one or more actions. |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.1 | ColumnntnQosDsAccessElemId | not-accessible | current | An index that enumerates the access element entries. Managers can obtain new values for row creation in this table by reading ntnQosDsAccessElemNextFree. |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.2 | ColumnntnQosDsAccessElemAddrType | read-create | current | The type of IP address used by this access element entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, … |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.3 | ColumnntnQosDsAccessElemDstAddr | read-create | current | The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnQosDsAccessElemDstPrefix… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.4 | ColumnntnQosDsAccessElemDstPrefixLength | read-create | current | The length of the CIDR Prefix carried in ntnQosDsAccessElemDstAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.5 | ColumnntnQosDsAccessElemSrcAddr | read-create | current | The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnQosDsAccessElemSrcPrefixLengt… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.6 | ColumnntnQosDsAccessElemSrcPrefixLength | read-create | current | The length of the CIDR Prefix carried in ntnQosDsAccessElemSrcAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicates… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.7 | ColumnntnQosDsAccessElemDscp | read-create | current | The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not been defined and thus all DSCP … |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.8 | ColumnntnQosDsAccessElemFlowId | read-create | current | The flow identifier in an IPv6 header. |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.9 | ColumnntnQosDsAccessElemProtocol | read-create | current | The IP protocol to match against the IPv4 protocol number or the IPv6 Next-Header number in the packet. A value of 255 means match all. Note the protocol numbe… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.10 | ColumnntnQosDsAccessElemDstL4PortMin | read-create | current | The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.11 | ColumnntnQosDsAccessElemDstL4PortMax | read-create | current | The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or grea… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.12 | ColumnntnQosDsAccessElemSrcL4PortMin | read-create | current | The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.13 | ColumnntnQosDsAccessElemSrcL4PortMax | read-create | current | The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater t… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.14 | ColumnntnQosDsAccessElemActionDrop | read-create | current | This action attribute is used to specify whether a packet should dropped or switched (i.e., not dropped). The value 'drop(1)', when specified, will cause the p… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.15 | ColumnntnQosDsAccessElemActionRemarkDscp | read-create | current | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram to be updated with… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.16 | ColumnntnQosDsAccessElemActionRemarkCos | read-create | current | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated based on the value of this o… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.17 | ColumnntnQosDsAccessElemActionSetPrec | read-create | current | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop pr… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.18 | ColumnntnQosDsAccessElemName | read-create | current | A label used to reference the access element in a textual manner. All related access elements (e.g., those that comprise an access-list) must have the same lab… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.19 | ColumnntnQosDsAccessElemBlock | read-create | current | A label used to identify access elements that are members of the same classification block. Access elements are members of the same block if they share the sam… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.20 | ColumnntnQosDsAccessElemType | read-create | current | Identifies the DS access element type. Designates the higher-level application through which this entry was created. |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.21 | ColumnntnQosDsAccessElemStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.22 | ColumnntnQosDsAccessElemStatus | read-create | current | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. |
| 1.3.6.1.4.1.45.4.7.1.13.2.1.23 | ColumnntnQosDsAccessElemEvalPrec | read-create | current | An evaluation order attribute used to order elements with the same name and to link elements across DS and L2 Access Element tables. Only used with NSNA applic… |
| 1.3.6.1.4.1.45.4.7.1.13.3 | ScalarntnQosL2AccessElemNextFree | read-only | current | This object contains an unused value for ntnQosL2AccessElemId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.13.4 | TablentnQosL2AccessElemTable | not-accessible | current | A table of IEEE 802-based access elements that a system may use to identify and manipulate Layer 2 traffic. |
| 1.3.6.1.4.1.45.4.7.1.13.4.1 | RowntnQosL2AccessElemEntry | not-accessible | current | A Layer 2 access element entry describes a single filter and one or more actions. |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.1 | ColumnntnQosL2AccessElemId | not-accessible | current | An index that enumerates the access element entries. Managers can obtain new values for row creation in this table by reading ntnQosL2AccessElemNextFree. |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.2 | ColumnntnQosL2AccessElemDstAddr | read-create | current | The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical address specified by this objec… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.3 | ColumnntnQosL2AccessElemDstAddrMask | read-create | current | This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against the address specified in the … |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.4 | ColumnntnQosL2AccessElemSrcAddr | read-create | current | The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches the physical address specified b… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.5 | ColumnntnQosL2AccessElemSrcAddrMask | read-create | current | This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison against the address specified in t… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.6 | ColumnntnQosL2AccessElemVlanIdMin | read-create | current | The minimum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosL2AccessElemVlanIdMin value must be le… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.7 | ColumnntnQosL2AccessElemVlanIdMax | read-create | current | The maximum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosL2AccessElemVlanIdMax value must be gr… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.8 | ColumnntnQosL2AccessElemVlanTag | read-create | current | This object indicates the data link layer packet format that frames must have to match this L2 classifier entry. A value of 'untagged(1)' indicates that only f… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.9 | ColumnntnQosL2AccessElemEtherType | read-create | current | This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Example settings would include '… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.10 | ColumnntnQosL2AccessElemUserPriority | read-create | current | The 802.1p user priority value against which the value contained in the user priority field of a tagged 802.1 frame is compared. A test for equality is perform… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.11 | ColumnntnQosL2AccessElemActionDrop | read-create | current | This action attribute is used to specify whether a packet should dropped or switched (i.e., not dropped). The value 'drop(1)', when specified, will cause the p… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.12 | ColumnntnQosL2AccessElemActionRemarkDscp | read-create | current | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram to be updated with… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.13 | ColumnntnQosL2AccessElemActionRemarkCos | read-create | current | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated based on the value of this o… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.14 | ColumnntnQosL2AccessElemActionSetPrec | read-create | current | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop pr… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.15 | ColumnntnQosL2AccessElemName | read-create | current | A label used to reference the access element in a textual manner. All related access elements (e.g., those that comprise an access-list) must have the same lab… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.16 | ColumnntnQosL2AccessElemBlock | read-create | current | A label used to identify access elements that are members of the same classification block. Access elements are members of the same block if they share the sam… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.17 | ColumnntnQosL2AccessElemType | read-create | current | Identifies the L2 access element type. Designates the higher-level application through which this entry was created. |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.18 | ColumnntnQosL2AccessElemStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.19 | ColumnntnQosL2AccessElemStatus | read-create | current | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. |
| 1.3.6.1.4.1.45.4.7.1.13.4.1.20 | ColumnntnQosL2AccessElemEvalPrec | read-create | current | An evaluation order attribute used to order elements with the same name and to link elements across DS and L2 Access Element tables. Only used with NSNA applic… |
| 1.3.6.1.4.1.45.4.7.1.13.5 | ScalarntnQosAccessAsgnNextFree | read-only | current | This object contains an unused value for ntnQosAccessAsgnId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.13.6 | TablentnQosAccessAsgnTable | not-accessible | current | A table of access assignments that are currently in place (i.e., access element/interface associations). |
| 1.3.6.1.4.1.45.4.7.1.13.6.1 | RowntnQosAccessAsgnEntry | not-accessible | current | An access assignment entry describes an access element/interface association. |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.1 | ColumnntnQosAccessAsgnId | not-accessible | current | An index that enumerates the access assignment entries. Managers can obtain new values for row creation in this table by reading ntnQosAccessAsgnNextFree. |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.2 | ColumnntnQosAccessAsgnAclType | read-create | current | Identifies the type of access element that is being referenced. |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.3 | ColumnntnQosAccessAsgnName | read-create | current | A label used to reference an access assignment in a textual manner. This label, coupled with the access element type identifier attribute (ntnQosAccessAsgnAclT… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.4 | ColumnntnQosAccessAsgnIfIndex | read-create | current | The interface to which the identified access element is to be applied, specified in terms of an ifIndex value. A value of 0 indicates that the entry represents… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.5 | ColumnntnQosAccessAsgnRate | read-create | current | The token-bucket rate, in kilobits per second (kbps). This attribute is used for: CIR for Simple Token Bucket CIR in RFC 2697 for srTCM CIR in RFC 2698 for trT… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.6 | ColumnntnQosAccessAsgnBurstSize | read-create | current | The maximum number of bytes in a single transmission burst. This attribute is used for: Token bucket size for Simple Token Bucket CBS in RFC 2697 for srTCM CBS… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.7 | ColumnntnQosAccessAsgnOutActionDrop | read-create | current | This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The value 'drop(1)', when speci… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.8 | ColumnntnQosAccessAsgnOutActionRemarkDscp | read-create | current | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram that is deemed to … |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.9 | ColumnntnQosAccessAsgnOutActionRemarkCos | read-create | current | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deemed to be out-of-profile to be … |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.10 | ColumnntnQosAccessAsgnOutActionSetPrec | read-create | current | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop pr… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.11 | ColumnntnQosAccessAsgnStatsType | read-create | current | The type of statistics tracking used by this access assignment. The value of this attribute dictates the amount of statistics tracking resources (i.e., counter… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.12 | ColumnntnQosAccessAsgnStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.13 | ColumnntnQosAccessAsgnStatus | read-create | current | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.14 | ColumnntnQosAccessAsgnNonMatchActionDrop | read-create | current | This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The value 'drop(1)', when speci… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.15 | ColumnntnQosAccessAsgnMeterType | read-create | current | The metering algorithm associated with the rate and burst parameters. The number and type of algorithms supported is implementation dependent. Potential algori… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.16 | ColumnntnQosAccessAsgnSecondaryRate | read-create | current | The token-bucket rate, in kilobits per second (kbps). This attribute is used for: PIR in RFC 2698 for trTCM A rate value equal to 0 indicates that no secondary… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.17 | ColumnntnQosAccessAsgnSecondaryBurstSize | read-create | current | The maximum number of bytes in a single transmission burst. This attribute is used for: EBS in RFC 2697 for srTCM PBS in RFC 2698 for trTCM. |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.18 | ColumnntnQosAccessAsgnYelActionDrop | read-create | current | This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The value 'drop(1)', when speci… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.19 | ColumnntnQosAccessAsgnYelActionRemarkDscp | read-create | current | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram that is deemed to … |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.20 | ColumnntnQosAccessAsgnYelActionRemarkCos | read-create | current | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deemed to be out-of-profile to be … |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.21 | ColumnntnQosAccessAsgnYelActionSetPrec | read-create | current | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop pr… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.22 | ColumnntnQosAccessAsgnSetPriority | read-create | current | Supports filter set prioritization when multiple filters sets may be associated with an entity (e.g., user, interface) but only one can be applied at the given… |
| 1.3.6.1.4.1.45.4.7.1.13.6.1.23 | ColumnntnQosAccessAsgnMeteringMode | read-create | current | Identifies the metering mode requested for the identified filter set. A value of 'noMetering(1)' indicates that metering is not requested for the components of… |
| 1.3.6.1.4.1.45.4.7.1.13.7 | TablentnQosIfAppsTable | not-accessible | current | Identifies QoS/security application criteria that is to be applied to a specific interface. |
| 1.3.6.1.4.1.45.4.7.1.13.7.1 | RowntnQosIfAppsEntry | not-accessible | current | A conceptual row in the ntnQosIfAppsTable. Each row identifies an interface value that corresponds to an entry in the ifTable (MIB-II) and application criteria… |
| 1.3.6.1.4.1.45.4.7.1.13.7.1.1 | ColumnntnQosIfAppsIfIndex | not-accessible | current | The ifIndex value that is associated with this instance of the ntnQosIfAppsEntry. The ifIndex value of this attribute must correspond to the ifTable entry with… |
| 1.3.6.1.4.1.45.4.7.1.13.7.1.2 | ColumnntnQosIfAppsAppEnable | read-create | current | An enumeration of interface applications. Indicates which applications, if any, apply to the associated interface. |
| 1.3.6.1.4.1.45.4.7.1.13.7.1.3 | ColumnntnQosIfAppsDefaultGateway | read-create | current | The IP address of the default gateway to be used when defining the policy criteria used by the ARP Spoofing support. |
| 1.3.6.1.4.1.45.4.7.1.13.7.1.4 | ColumnntnQosIfAppsIfType | read-create | current | A value describing the overall interface type. Used when determining whether the DHCP Blocking support should be applied to the associated interface. |
| 1.3.6.1.4.1.45.4.7.1.13.7.1.5 | ColumnntnQosIfAppsDHCPServer | read-create | current | The IP address of the DHCP Server to be used when defining the policy criteria used by the DHCP Spoofing support. |
| 1.3.6.1.4.1.45.4.7.1.13.7.1.6 | ColumnntnQosIfAppsStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.13.7.1.7 | ColumnntnQosIfAppsStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.13.8 | ScalarntnQosUserPolicyNextFree | read-only | current | This object contains an unused value for ntnQosUserPolicyId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.13.9 | TablentnQosUserPolicyTable | not-accessible | current | User policy definitions. This class describes the user policy data that exists on the device. User policy data associates a user and role with an interface. |
| 1.3.6.1.4.1.45.4.7.1.13.9.1 | RowntnQosUserPolicyEntry | not-accessible | current | An instance of this class describes the characteristics of a user policy data set. User policy data set components include a role combination, a user and group… |
| 1.3.6.1.4.1.45.4.7.1.13.9.1.1 | ColumnntnQosUserPolicyId | not-accessible | current | An index that enumerates the user policy entries. Managers can obtain new values for row creation in this table by reading ntnQosUserPolicyNextFree. |
| 1.3.6.1.4.1.45.4.7.1.13.9.1.2 | ColumnntnQosUserPolicyIfIndex | read-create | current | The ifIndex value that is associated with this instance of the ntnQosUserPolicyEntry. The ifIndex value of this attribute must correspond to an ifTable entry w… |
| 1.3.6.1.4.1.45.4.7.1.13.9.1.3 | ColumnntnQosUserPolicyRoleCombination | read-create | current | The role combination that is associated with the interface with an ifIndex value that is equal to ntnQosUserPolicyIfIndex and the user identified by the ntnQos… |
| 1.3.6.1.4.1.45.4.7.1.13.9.1.4 | ColumnntnQosUserPolicyUserName | read-create | current | The user name identifying the user that is currently associated with this user policy (i.e., ifIndex and role combination) information. |
| 1.3.6.1.4.1.45.4.7.1.13.9.1.5 | ColumnntnQosUserPolicyUserGroup | read-create | current | The user group with which the user, identified by the ntnQosUserPolicyUserName attribute, is associated. |
| 1.3.6.1.4.1.45.4.7.1.13.9.1.6 | ColumnntnQosUserPolicySessionId | read-only | current | The system-assigned session identifier used to track instances of this user policy entry (i.e., the user policy entry for a specific interface and user). |
| 1.3.6.1.4.1.45.4.7.1.13.9.1.7 | ColumnntnQosUserPolicySessionStart | read-only | current | The system-assigned session start timestamp. The value of this attribute corresponds to the value of the sysUpTime attribute, coverted to seconds, at the insta… |
| 1.3.6.1.4.1.45.4.7.1.13.9.1.8 | ColumnntnQosUserPolicySessionGroup | read-only | current | The system-assigned session group identifier. Multiple user sessions belong to the same group if they share the same role combination and have the same value f… |
| 1.3.6.1.4.1.45.4.7.1.13.9.1.9 | ColumnntnQosUserPolicyStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value permanent(4) need not allow write-access to any columnar objects in the row. This ob… |
| 1.3.6.1.4.1.45.4.7.1.13.9.1.10 | ColumnntnQosUserPolicyStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Row creation using only default v… |
| 1.3.6.1.4.1.45.4.7.1.13.9.1.11 | ColumnntnQosUserPolicySrcMacAddr | read-create | current | The 802 source MAC address associated with the identified user. If specified, this address will automatically be used in associated user policy criteria to uni… |
| 1.3.6.1.4.1.45.4.7.1.13.9.1.12 | ColumnntnQosUserPolicySrcMacAddrMask | read-create | current | This object specifies the bits in an 802 source MAC address that should be considered when performing a 802 MAC SA comparison against the address specified in … |
| 1.3.6.1.4.1.45.4.7.1.13.10 | ScalarntnQosDsL2AccessElemNextFree | read-only | current | This object contains an unused value for ntnQosDsL2AccessElemId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.13.11 | TablentnQosDsL2AccessElemTable | not-accessible | current | A table of IP/L2 access elements that a system may use to identify and manipulate IP/L2 traffic. |
| 1.3.6.1.4.1.45.4.7.1.13.11.1 | RowntnQosDsL2AccessElemEntry | not-accessible | current | An IP/L2 access element entry describes a single filter and one or more actions. |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.1 | ColumnntnQosDsL2AccessElemId | not-accessible | current | An index that enumerates the access element entries. Managers can obtain new values for row creation in this table by reading ntnQosDsL2AccessElemNextFree. Ver… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.2 | ColumnntnQosDsL2AccessElemAddrType | read-create | current | The type of IP address used by this access element entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, … |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.3 | ColumnntnQosDsL2AccessElemDstIpAddr | read-create | current | The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnQosDsL2AccessElemDstIpPr… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.4 | ColumnntnQosDsL2AccessElemDstIpPrefixLength | read-create | current | The length of the CIDR Prefix carried in ntnQosDsL2AccessElemDstIpAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indic… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.5 | ColumnntnQosDsL2AccessElemSrcIpAddr | read-create | current | The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. ntnQosDsL2AccessElemSrcIpPrefixL… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.6 | ColumnntnQosDsL2AccessElemSrcIpPrefixLength | read-create | current | The length of the CIDR Prefix carried in ntnQosDsL2AccessElemSrcIpAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indic… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.7 | ColumnntnQosDsL2AccessElemDscp | read-create | current | The value that the DSCP in the packet must have to match this entry. A value of -1 indicates that a specific DSCP value has not been defined and thus all DSCP … |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.8 | ColumnntnQosDsL2AccessElemFlowId | read-create | current | The flow identifier in an IPv6 header. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.9 | ColumnntnQosDsL2AccessElemProtocol | read-create | current | The IP protocol to match against the IPv4 protocol number or the IPv6 Next-Header number in the packet. A value of 255 means match all. Note the protocol numbe… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.10 | ColumnntnQosDsL2AccessElemDstL4PortMin | read-create | current | The minimum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.11 | ColumnntnQosDsL2AccessElemDstL4PortMax | read-create | current | The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or grea… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.12 | ColumnntnQosDsL2AccessElemSrcL4PortMin | read-create | current | The minimum value that the layer-4 source port number in the packet must have in order to match this classifier entry. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.13 | ColumnntnQosDsL2AccessElemSrcL4PortMax | read-create | current | The maximum value that the layer-4 source port number in the packet must have in order to match this classifier entry. This value must be equal to or greater t… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.14 | ColumnntnQosDsL2AccessElemDstMacAddr | read-create | current | The 802 address against which the 802 DA of incoming traffic streams will be compared. Frames whose 802 DA matches the physical address specified by this objec… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.15 | ColumnntnQosDsL2AccessElemDstMacAddrMask | read-create | current | This object specifies the bits in a 802 destination address that should be considered when performing a 802 DA comparison against the address specified in the … |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.16 | ColumnntnQosDsL2AccessElemSrcMacAddr | read-create | current | The 802 MAC address against which the 802 MAC SA of incoming traffic streams will be compared. Frames whose 802 MAC SA matches the physical address specified b… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.17 | ColumnntnQosDsL2AccessElemSrcMacAddrMask | read-create | current | This object specifies the bits in a 802 MAC source address that should be considered when performing a 802 MAC SA comparison against the address specified in t… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.18 | ColumnntnQosDsL2AccessElemVlanIdMin | read-create | current | The minimum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosDsL2AccessElemVlanIdMin value must be … |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.19 | ColumnntnQosDsL2AccessElemVlanIdMax | read-create | current | The maximum value that the VLAN ID (VID) in a tagged packet must have in order to match this classifier entry. The ntnQosDsL2AccessElemVlanIdMax value must be … |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.20 | ColumnntnQosDsL2AccessElemVlanTag | read-create | current | This object indicates the data link layer packet format that frames must have to match this L2 classifier entry. A value of 'untagged(1)' indicates that only f… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.21 | ColumnntnQosDsL2AccessElemEtherType | read-create | current | This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Example settings would include '… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.22 | ColumnntnQosDsL2AccessElemUserPriority | read-create | current | The 802.1p user priority value against which the value contained in the user priority field of a tagged 802.1 frame is compared. A test for equality is perform… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.23 | ColumnntnQosDsL2AccessElemActionDrop | read-create | current | This action attribute is used to specify whether a packet should dropped or switched (i.e., not dropped). The value 'drop(1)', when specified, will cause the p… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.24 | ColumnntnQosDsL2AccessElemActionRemarkDscp | read-create | current | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram to be updated with… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.25 | ColumnntnQosDsL2AccessElemActionRemarkCos | read-create | current | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame to be updated based on the value of this o… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.26 | ColumnntnQosDsL2AccessElemActionSetPrec | read-create | current | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop pr… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.27 | ColumnntnQosDsL2AccessElemName | read-create | current | A label used to reference the access element in a textual manner. All related access elements (e.g., those that comprise an access-list) must have the same lab… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.28 | ColumnntnQosDsL2AccessElemBlock | read-create | current | A label used to identify access elements that are members of the same classification block. Access elements are members of the same block if they share the sam… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.29 | ColumnntnQosDsL2AccessElemType | read-create | current | Identifies the DS/L2 access element type. Designates the higher-level application through which this entry was created. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.30 | ColumnntnQosDsL2AccessElemStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.31 | ColumnntnQosDsL2AccessElemStatus | read-create | current | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.32 | ColumnntnQosDsL2AccessElemEvalPrec | read-create | current | An evaluation order attribute used to order elements with the same name and to link elements across DS and L2 Access Element tables. Only used with NSNA applic… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.33 | ColumnntnQosDsL2AccessElemIpFlags | read-create | current | Represents the flags present in an IPv4 header. If a bit that is associated with a specific IP flag is set in this attribute, IPv4 packets with the specified f… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.34 | ColumnntnQosDsL2AccessElemTcpCtrlFlags | read-create | current | Represents the control flags (code bits) present in an TCP header. If a bit that is associated with a specific TCP control flag is set in this attribute, TCP p… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.35 | ColumnntnQosDsL2AccessElemIpv4Options | read-create | current | This object indicates whether the presence, or lack thereof, of IPv4 options in an IPv4 packet should should be considered when looking for a match for this cl… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.36 | ColumnntnQosDsL2AccessElemPktType | read-create | current | This object indicates the data link layer frame format that frames must have to match this L2 classifier entry. A value of 'ethernetII(1)' indicates that only … |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.37 | ColumnntnQosDsL2AccessElemIvidMin | read-create | current | The minimum value that the Inner VLAN ID (Ivid) in a double tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrIvidMin val… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.38 | ColumnntnQosDsL2AccessElemIvidMax | read-create | current | The maximum value that the Inner VLAN ID (Ivid) in a double tagged packet must have in order to match this classifier entry. The ntnL2MultiFieldClfrIvidMax val… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.39 | ColumnntnQosDsL2AccessElemUnknownUcastFrames | read-create | current | If 'true(1)', frames containing an unknown unicast destination address will match this classification entry. A value of 'false(2)' indicates that no classifica… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.40 | ColumnntnQosDsL2AccessElemUnknownMcastFrames | read-create | current | If 'true(1)', frames containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classifi… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.41 | ColumnntnQosDsL2AccessElemKnownUcastFrames | read-create | current | If 'true(1)', frames containing a known unicast destination address will match this classification entry. A value of 'false(2)' indicates that no classificatio… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.42 | ColumnntnQosDsL2AccessElemKnownMcastFrames | read-create | current | If 'true(1)', frames containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classificat… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.43 | ColumnntnQosDsL2AccessElemBcastFrames | read-create | current | If 'true(1)', frames containing a broadcast destination address will match this classification entry. A value of 'false(2)' indicates that no classification is… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.44 | ColumnntnQosDsL2AccessElemUnknownIpMcast | read-create | current | If 'true(1)', IP packets containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no clas… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.45 | ColumnntnQosDsL2AccessElemKnownIpMcast | read-create | current | If 'true(1)', IP packets containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no classif… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.46 | ColumnntnQosDsL2AccessElemNonIpPkt | read-create | current | If 'true(1)', non IP packets will match this classification entry. A value of 'false(2)' indicates that no classification is requested based on this packet typ… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.47 | ColumnntnQosDsL2AccessElemVersion | read-create | current | Version indicator for ntnQosDsL2AccessElemTable. |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.48 | ColumnntnQosDsL2AccessElemUnknownNonIpMcast | read-create | current | If 'true(1)', non-IP packets containing an unknown multicast destination address will match this classification entry. A value of 'false(2)' indicates that no … |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.49 | ColumnntnQosDsL2AccessElemKnownNonIpMcast | read-create | current | If 'true(1)', non-IP packets containing a known multicast destination address will match this classification entry. A value of 'false(2)' indicates that no cla… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.50 | ColumnntnQosDsL2AccessElemMasterBlockMember | read-create | current | If 'true(1)', attribute values in this DsL2Access element will take precedence over values in other entries when multiple elements are members of the same bloc… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.51 | ColumnntnQosDsL2AccessElemMeterType | read-create | current | The metering algorithm associated with the rate and burst parameters. Version 1/2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.52 | ColumnntnQosDsL2AccessElemRate | read-create | current | The token-bucket rate, in kilobits per second (kbps). This attribute is used for: CIR for Simple Token Bucket CIR in RFC 2697 for srTCM CIR in RFC 2698 for trT… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.53 | ColumnntnQosDsL2AccessElemBurstSize | read-create | current | The maximum number of bytes in a single transmission burst. This attribute is used for: Token bucket size for Simple Token Bucket CBS in RFC 2697 for srTCM CBS… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.54 | ColumnntnQosDsL2AccessElemOutActionDrop | read-create | current | This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The value 'drop(1)', when speci… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.55 | ColumnntnQosDsL2AccessElemOutActionRemarkDscp | read-create | current | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram that is deemed to … |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.56 | ColumnntnQosDsL2AccessElemOutActionRemarkCos | read-create | current | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deemed to be out-of-profile to be … |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.57 | ColumnntnQosDsL2AccessElemOutActionSetPrec | read-create | current | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop pr… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.58 | ColumnntnQosDsL2AccessElemSecondaryRate | read-create | current | The token-bucket rate, in kilobits per second (kbps). This attribute is used for: PIR in RFC 2698 for trTCM A rate value equal to 0 indicates that no secondary… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.59 | ColumnntnQosDsL2AccessElemSecondaryBurstSize | read-create | current | The maximum number of bytes in a single transmission burst. This attribute is used for: EBS in RFC 2697 for srTCM PBS in RFC 2698 for trTCM. Version 2 attribut… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.60 | ColumnntnQosDsL2AccessElemYelActionDrop | read-create | current | This action attribute is used to specify whether a packet deemed out-of-profile should dropped or switched (i.e., not dropped). The value 'drop(1)', when speci… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.61 | ColumnntnQosDsL2AccessElemYelActionRemarkDscp | read-create | current | This action component, when specified, will cause the value contained in the Differentiated Services (DS) field of an associated IP datagram that is deemed to … |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.62 | ColumnntnQosDsL2AccessElemYelActionRemarkCos | read-create | current | This action attribute, when specified, will cause the value contained in the user priority field of the 802.1Q frame that is deemed to be out-of-profile to be … |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.63 | ColumnntnQosDsL2AccessElemYelActionSetPrec | read-create | current | This action attribute, when specified, will cause the packet being evaluated to be associated with the specified relative drop precedence. The relative drop pr… |
| 1.3.6.1.4.1.45.4.7.1.13.11.1.64 | ColumnntnQosDsL2AccessElemStage | read-create | current | This attribute specifies the stage (ingress or egress) on which filters are applied. Version 2 attribute. |
| 1.3.6.1.4.1.45.4.7.1.13.12 | TablentnQosFilterSetStatsTable | not-accessible | current | This table contains counters for all the traffic passing through a processing element at the filter set/classifier level. |
| 1.3.6.1.4.1.45.4.7.1.13.12.1 | RowntnQosFilterSetStatsEntry | not-accessible | current | An entry in the filter set statistics table describes a single set of traffic counters for a specific filter set/precedence/evaluation order combination. |
| 1.3.6.1.4.1.45.4.7.1.13.12.1.1 | ColumnntnQosFilterSetStatsAccessAsgnId | not-accessible | current | An index component that identifies the Access Assignment element associated with this Filter Set Statistics entry. This attribute has the same value as the ntn… |
| 1.3.6.1.4.1.45.4.7.1.13.12.1.2 | ColumnntnQosFilterSetStatsPrecedence | not-accessible | current | An index component that identifies the precedence level associated with the filter set element for which statistics data is being returned. |
| 1.3.6.1.4.1.45.4.7.1.13.12.1.3 | ColumnntnQosFilterSetStatsEvalOrder | not-accessible | current | An index component that identifies the evaluation order associated with the filter set element for which statistics data is being returned. |
| 1.3.6.1.4.1.45.4.7.1.13.12.1.4 | ColumnntnQosFilterSetStatsInProfileOctets | read-only | current | The number of octets considered to be in-profile that have been processed by the associated data path classifier. |
| 1.3.6.1.4.1.45.4.7.1.13.12.1.5 | ColumnntnQosFilterSetStatsInProfilePkts | read-only | current | The number of packets considered to be in-profile that have been processed by the associated data path classifier. |
| 1.3.6.1.4.1.45.4.7.1.13.12.1.6 | ColumnntnQosFilterSetStatsOutOfProfileOctets | read-only | current | The number of octets considered to be out-of-profile that have been processed by the associated data path classifier. |
| 1.3.6.1.4.1.45.4.7.1.13.12.1.7 | ColumnntnQosFilterSetStatsOutOfProfilePkts | read-only | current | The number of packets considered to be out-of-profile that have been processed by the associated data path classifier. |
| 1.3.6.1.4.1.45.4.7.1.13.12.1.8 | ColumnntnQosFilterSetStatsAccessElemId | read-create | current | Identifies the individual Access Element that is a component of the referenced filter set and to which the statistics data associated with this filter set/prec… |
| 1.3.6.1.4.1.45.4.7.1.13.12.1.9 | ColumnntnQosFilterSetStatsStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.13.12.1.10 | ColumnntnQosFilterSetStatsStatus | read-create | current | The status of this row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. |
| 1.3.6.1.4.1.45.4.7.1.13.13 | ScalaravFcoeRedirNextFree | read-only | current | This object contains an unused value for avFcoeRedirId, or a zero to indicate that none exist. |
| 1.3.6.1.4.1.45.4.7.1.13.14 | TableavFcoeRedirTable | not-accessible | current | A table of FCoE streams that are being redirected through an external FCoE Network Controller (FNC). |
| 1.3.6.1.4.1.45.4.7.1.13.14.1 | RowavFcoeRedirEntry | not-accessible | current | An FCoE redirection entry contains the data necessary to redirect a specific FCoE stream through an external network controller. |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.1 | ColumnavFcoeRedirId | not-accessible | current | An index that enumerates the FCoE redirect entries. Managers can obtain new values for row creation in this table by reading avFcoeRedirNextFree. |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.2 | ColumnavFcoeRedirDstId | read-create | current | This object specifies the Fibre Channel (FC) destination ID (D_ID) that should be used when performing stream identification. |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.3 | ColumnavFcoeRedirIngressInterfaceList | read-create | current | This object identifies ingress interfaces, using an interface's ifIndex representation, to which the filter and action criteria specified in this entry should … |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.4 | ColumnavFcoeRedirVlanIdMin | read-create | current | The minimum value that the VLAN ID (VID) in a tagged packet must have in order to match this entry. The avFcoeRedirVlanIdMin value must be less than or equal t… |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.5 | ColumnavFcoeRedirVlanIdMax | read-create | current | The maximum value that the VLAN ID (VID) in a tagged packet must have in order to match this entry. The avFcoeRedirVlanIdMax value must be greater than or equa… |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.6 | ColumnavFcoeRedirUserPriority | read-create | current | The 802.1p user priority value against which the value contained in the user priority field of a tagged 802.1 frame is compared. A test for equality is perform… |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.7 | ColumnavFcoeRedirEtherType | read-create | current | This object specifies the value that will be compared against the value contained in the EtherType field of an IEEE 802 frame. Example settings would include '… |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.8 | ColumnavFcoeRedirSrcId | read-create | current | This object specifies the Fibre Channel (FC) source ID (D_ID) that should be used when performing stream identification. Setting this attribute to it's default… |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.9 | ColumnavFcoeRedirActionUpdateDstMac | read-create | current | The 802 MAC address that will be used to update the destination MAC address in frames that are identified based on filter data specified in this entry. |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.10 | ColumnavFcoeRedirActionUpdateSrcMac | read-create | current | The 802 MAC address that will be used to update the source MAC address in frames that are identified based on filter data specified in this entry. |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.11 | ColumnavFcoeRedirActionEgressInterface | read-create | current | The interface through which frames identified based on filter data specified in this entry will egress the device. An egress interface or an egress trunk must … |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.12 | ColumnavFcoeRedirName | read-create | current | A label used to reference the FCoE redirect entry in a textual manner. |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.13 | ColumnavFcoeRedirStorage | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This obj… |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.14 | ColumnavFcoeRedirStatus | read-create | current | The status of this conceptual row. An entry may not exist in the active state unless all objects in the entry have an appropriate value. |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.15 | ColumnavFcoeRedirProcessedFrames | read-only | current | Counts the frames that have matched the criteria specified in this entry. |
| 1.3.6.1.4.1.45.4.7.1.13.14.1.16 | ColumnavFcoeRedirActionEgressTrunkId | read-create | current | The trunk through which frames identified based on filter data specified in this entry will egress the device. An egress interface or an egress trunk must be s… |
| 1.3.6.1.4.1.45.4.7.1.14 | TablentnQosDEITable | not-accessible | current | Table to configure DEI support. DEI provides the user the option to set the packet color based on the CFI (used as DEI) bit in the packet 802.1Q tag. Also the … |
| 1.3.6.1.4.1.45.4.7.1.14.1 | RowntnQosDEIEntry | not-accessible | current | An instance of the ntnQoSDEI class that identifies an interface options for DEI. |
| 1.3.6.1.4.1.45.4.7.1.14.1.1 | ColumnntnQosDEIInterfaceId | not-accessible | current | An index that identifies the interface index associated with this table entry. |
| 1.3.6.1.4.1.45.4.7.1.14.1.2 | ColumnntnQosDEIIngressColorFromDEI | read-write | current | This option allows the user to enable ingress coloring if the packets based on DEI in the 802.1Q packet tag. |
| 1.3.6.1.4.1.45.4.7.1.14.1.3 | ColumnntnQosDEIEgressMarkDEI | read-write | current | This option allows the user to mark at egress the DEI bit in the 802.1Q tag if the packet is colored. |
| 1.3.6.1.4.1.45.4.7.1.15 | NodentnQosQuickPolicy | |||
| 1.3.6.1.4.1.45.4.7.1.15.1 | ScalarntnQosQuickPolicyControl | read-write | current | This object is used to create and delete quick policies. Setting the value to create(2) will create a quick policy based on the current values of the other obj… |
| 1.3.6.1.4.1.45.4.7.1.15.2 | ScalarntnQosQuickPolicyPortList | read-write | current | This object indicates the list of ports to which the quick policy will be applied. |
| 1.3.6.1.4.1.45.4.7.1.15.3 | ScalarntnQosQuickPolicyAction | read-write | current | This object indicates the main action of the quick-policy. |
| 1.3.6.1.4.1.45.4.7.1.15.4 | ScalarntnQosQuickPolicyId | read-write | current | This object indicates the ID of a policy to be deleted. |
| 1.3.6.1.4.1.45.4.7.1.15.5 | ScalarntnQosQuickPolicyPbitsValue | read-write | current | The pbits value for creating a quick policy. |
| 1.3.6.1.4.1.45.4.7.1.15.6 | ScalarntnQosQuickPolicyRate | read-write | current | The rate value of the simple meter associated with a quick policy. |
| 1.3.6.1.4.1.45.4.7.1.15.7 | ScalarntnQosQuickPolicyTrTCMType | read-write | current | The type of a trtc quick policy. This object is ignored if the value of ntnQosQuickPolicyAction is not trtcm(4). |
| 1.3.6.1.4.1.45.4.7.1.15.8 | ScalarntnQosQuickPolicyCIRRate | read-write | current | The CIR rate for creating a trtcm quick policy. |
| 1.3.6.1.4.1.45.4.7.1.15.9 | ScalarntnQosQuickPolicyPIRRate | read-write | current | The PIR rate for creating a trtcm quick policy. |
| 1.3.6.1.4.1.45.4.7.1.15.10 | ScalarntnQosQuickPolicyTrackQiQType | read-write | current | The QinQ type for a quick policy. |
| 1.3.6.1.4.1.45.4.7.1.15.11 | ScalarntnQosQuickPolicyDscp | read-write | current | The DSCP codepoint for a quick policy. |
| 1.3.6.1.4.1.45.4.7.1.15.12 | ScalarntnQosQuickPolicyPriority | read-write | current | The priority value for a quick policy. |
| 1.3.6.1.4.1.45.4.7.1.15.13 | ScalarntnQosQuickPolicyVid | read-write | current | The VLAN ID for a quick policy. |
| 1.3.6.1.4.1.45.4.7.1.15.14 | ScalarntnQosQuickPolicyTPID | read-write | current | The TPID value for a quick policy. |
| 1.3.6.1.4.1.45.4.7.1.15.15 | ScalarntnQosQuickPolicyIVid | read-write | current | The IVID value or a quick policy. |
| 1.3.6.1.4.1.45.4.7.1.15.16 | ScalarntnQosQuickPolicyITPID | read-write | current | The ITPID value for a quick policy. |
| 1.3.6.1.4.1.45.4.7.1.15.17 | ScalarntnQosQuickPolicyIPriority | read-write | current | The I-priority value for a quick policy. |
| 1.3.6.1.4.1.45.4.7.1.15.18 | ScalarntnQosQuickPolicyPrecedence | read-write | current | The precedence value for a quick policy. |
| 1.3.6.1.4.1.45.4.7.1.15.19 | ScalarntnQosQuickPolicyTrackStatistics | read-write | current | Indicates whether statistics should be tracked for this quick policy. |
| 1.3.6.1.4.1.45.4.7.1.16 | NodentnQosFilterLimiting | |||
| 1.3.6.1.4.1.45.4.7.1.16.1 | ScalarntnQosFilterLimitingAdminEnabled | read-write | current | This object indicates whether QoS filter limiting is administratively enabled. Note that changes to this object are not applied to the operational state until … |
| 1.3.6.1.4.1.45.4.7.1.16.2 | ScalarntnQosFilterLimitingOperEnabled | read-only | current | This object indicates whether QoS filter limiting is currently enabled. Note that this object will only change values (in response to changes to the value of n… |
| 1.3.6.1.4.1.45.4.7.2 | NodentnQosPolicyEvolPibConformance | |||
| 1.3.6.1.4.1.45.4.7.2.1 | NodentnQosPolicyEvolPibCompliances | |||
| 1.3.6.1.4.1.45.4.7.2.1.2 | CompliancentnQosPolicyEvolPibCompliance | read-only | current | Describes the requirements for conformance to the Nortel Networks QoS Policy Evolution PIB. |
| 1.3.6.1.4.1.45.4.7.2.2 | NodentnQosPolicyEvolPibGroups | |||
| 1.3.6.1.4.1.45.4.7.2.2.1 | GroupntnQosInterfaceTypeGroup | current | Objects from the ntnQosInterfaceTypeExtTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.2 | GroupntnQosQsetPriAssignmentGroup | current | Objects from the ntnQosQsetPriAssignmentTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.3 | GroupntnQosQsetDscpAssignmentGroup | current | Objects from the ntnQosQsetDscpAssignmentTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.4 | GroupntnQosShapingParamsGroup | current | Objects from the ntnQosShapingParamsTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.5 | GroupntnDsMultiFieldClfrGroup | current | Objects supporting and from the ntnDsMultiFieldClfrTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.6 | GroupntnL2MultiFieldClfrGroup | current | Objects supporting and from the ntnL2MultiFieldClfrTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.7 | GroupntnSystemClfrGroup | current | Objects supporting and from the ntnSystemClfrTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.8 | GroupntnClfrComponentGroup | current | Objects supporting and from the ntnClfrComponentTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.9 | GroupntnClfrBlockGroup | current | Objects supporting and from the ntnClfrBlockTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.10 | GroupntnQosMeterGroup | current | Objects supporting and from the ntnQosMeterTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.11 | GroupntnQosTBParamGroup | current | Objects supporting and from the ntnQosTBParamTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.12 | GroupntnQosBaseActionGroup | current | Objects supporting and from the ntnQosBaseActionTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.13 | GroupntnQosIfcActionGroup | current | Objects supporting and from the ntnQosIfcActionTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.14 | GroupntnQosPolicyGroup | current | Objects supporting and from the ntnQosPolicyTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.15 | GroupntnQosCountActGroup | current | Objects supporting and from the ntnCountActTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.16 | GroupntnQosFilterStatsGroup | current | Objects from the ntnQosFilterStatsTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.17 | GroupntnQosPolicyDiagsGroup | current | Objects from the ntnQosPolicyDiagsTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.18 | GroupntnQosIfAssignmentGroup | current | Objects from the ntnQosIfAssignmentTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.19 | GroupntnQosIfQueueGroup | current | Objects from the ntnQosIfQueueTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.20 | GroupntnQosDscpToCosGroup | current | Objects from the ntnQosDscpToCosTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.21 | GroupntnQosCosToDscpGroup | current | Objects from the ntnQosCosToDscpTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.22 | GroupntnQosPrcSupportGroup | current | Objects from the ntnQosPrcSupportTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.23 | GroupntnQosPolicyDeviceIdentGroup | current | Objects from the ntnQosPolicyDeviceIdentTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.24 | GroupntnQosAgentConfigGroup | current | Objects used for QoS Policy Agent configuration. | |
| 1.3.6.1.4.1.45.4.7.2.2.25 | GroupntnQosInterfaceRoleGroup | current | Objects from the ntnQosInterfaceRoleTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.26 | GroupntnQosUserRoleGroup | current | Objects from the ntnQosUserRoleTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.27 | GroupntnQosIfShapingGroup | current | Objects from the ntnQosIfShapingTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.28 | GroupntnQosDsAccessElemGroup | current | Objects supporting and from the ntnQosDsAccessElemTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.29 | GroupntnQosL2AccessElemGroup | current | Objects supporting and from the ntnQosL2AccessElemTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.30 | GroupntnQosAccessAsgnGroup | current | Objects supporting and from the ntnQosAccessAsgnTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.31 | GroupntnQosIfAppsGroup | current | Objects from the ntnQosIfAppsTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.32 | GroupntnQosUserPolicyGroup | current | Objects from the ntnQosUserPolicyTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.33 | GroupntnQosDsL2AccessElemGroup | current | Objects supporting and from the ntnQosDsL2AccessElemTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.34 | GroupntnQosCosShapingGroup | current | Objects from the ntnQosCosShapingTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.35 | GroupntnQosPolicyPrecResDiagsGroup | current | Objects from the ntnQosPolicyPrecResDiagsTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.36 | GroupntnQosQueueShapingGroup | current | Objects from the ntnQosQueueShapingTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.37 | GroupntnQosFilterSetStatsGroup | current | Objects from the ntnQosFilterSetStatsTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.38 | GroupavFcoeRedirGroup | current | Objects from the avFcoeRedirTable. | |
| 1.3.6.1.4.1.45.4.7.2.2.39 | GroupntnQosQuickPolicyGroup | current | Objects from the ntnQosQuickPolicy support. | |
| 1.3.6.1.4.1.45.4.7.2.2.40 | GroupntnQosFilterLimitingGroup | current | Objects from the ntnQosFilterLimiting support. | |
| 1.3.6.1.4.1.45.4.7.2.2.41 | GroupntnQosDEIGroup | current | Objects from the ntnQosDEI support. | |
| 1.3.6.1.4.1.45.4.7.2.2.42 | GroupntnQosMappingScalarsGroup | current | Objects from the ntnQosMapping support. | |
| 1.3.6.1.4.1.45.4.7.2.2.43 | GroupntnQosNotificationGroup | current | QoS-related notifications. | |
| 1.3.6.1.4.1.45.4.7.3 | NodentnQosPolicyEvolPibNotifications | |||
| 1.3.6.1.4.1.45.4.7.3.1 | NotificationntnQosPolicyEvolLocalUbpSessionFailure | current | Signifies that filter data associated with a user could not be installed in the context of local UBP support. The current UBP support level determines whether … | |
| 1.3.6.1.4.1.45.4.7.3.2 | NotificationntnQosPolicyEvolDosAttackDetected | current | Indicates that the DAPP support has detected an attack on the device generating this trap. A notification is generated once for each unit that contains ports o… | |
| 1.3.6.1.4.1.45.4.7.3.3 | NotificationavFcoeRedirEgressIssueDetected | current | Indicates that an event that impacts egress data that is associated with one or more FCoE Redirect entries has been detected. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DscpUpdate | Integer32 (-1 | 0..63 | 64) | current | The IP header Differentiated Services Code-Point that may be used for discriminating among traffic streams. The value -1 is used to indicate that the DSCP value should not be updated. The value 64 is used to indicate th… |
| FcId | OCTET STRING (SIZE (3)) | current | Represents a Fibre Channel address |
| FlowIdOrAny | Integer32 (-1 | 0..1048575) | current | The flow identifier in an IPv6 header that may be used to discriminate traffic flows. The value of -1 is used to indicate a wildcard, i.e., any value. |
| IndexIntegerOrZero | Unsigned32 (0..4294967295) | current | An integer which may be used as a table index. A value of zero indicates that no table index has been specified. |
| InterfaceList | OCTET STRING (SIZE (0..128)) | current | Each bit of this bit mask corresponds to an ifIndex value, with the most significant bit of the i-th octet of this octet string corresponding to the ((8*i) - 7)-th ifIndex, and the least significant bit of the i-th octe… |
| QosIeee802Cos | Integer32 (0..7) | current | An integer that is in the range of the IEEE 802 COS values. This corresponds to the 802.1p priority values. |
| VersionIndicator | INTEGER { version1(1), version2(2) } | current | A version indicator is used when different versions of a given table entry exist. The version itself specifies which attributes in an entry may be set to non-default values. Tables that include a version indicator attri… |