OS-PROV-SOAM-PM-MIB
318 objects
This MIB module contains the management objects for the management of Ethernet Services Operations, Administration and Maintenance for Performance Monitoring of Provision Services (high-level for MEF-SOAM-PM-MIB).
Imported Objects
| IEEE8021-CFM-MIB | -- RFC 2580 Dot1afCfmIndexIntegerNextFree |
| MEF-SOAM-TC-MIB MISSING | 1ag MefSoamTcOperationTimeType MefSoamTcAvailabilityType MefSoamTcDataPatternType MefSoamTcDelayMeasurementBinType MefSoamTcMeasurementPeriodType MefSoamTcStatusType MefSoamTcTestPatternType |
| OS-COMMON-TC-MIB | EntityName EntryValidator OsCfmMepIdOrZero ProfileStatus |
| OS-ETH-SERV-MIB | osEthServ osEthServFlowEntry osEthServFlowId osEthServId |
| OS-PROV-BINS-MIB | osProvBinCfgBinIndex |
| SNMPv2-CONF | -- RFC 2579 OBJECT-GROUP MODULE-COMPLIANCE NOTIFICATION-GROUP |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC 2578 TEXTUAL-CONVENTION DateAndTime DisplayString MacAddress RowStatus TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6926.2.10.33 | IdentityosSoamPmMib | This MIB module contains the management objects for the management of Ethernet Services Operations, Administration and Maintenance for Performance Monitoring o… | ||
| 1.3.6.1.4.1.6926.2.10.33.0 | NodeosSoamPmNotifs | |||
| 1.3.6.1.4.1.6926.2.10.33.0.1 | NotificationosSoamAvailabilityChangeAlarm | current | An osSoamAvailabilityChangeAlarm notification is sent when the state of osSoamLmMeasStatsAvailFwStatus or osSoamLmMeasStatsAvailBwStatus changes. The managemen… | |
| 1.3.6.1.4.1.6926.2.10.33.0.2 | NotificationosSoamLmSessionStartStopAlarm | current | An osSoamLmSessionStartStopAlarm notification is sent when the state of osSoamLmCfgSessionStatus changes. The management entity that receives the notification … | |
| 1.3.6.1.4.1.6926.2.10.33.0.3 | NotificationosSoamDmSessionStartStopAlarm | current | An osSoamDmSessionStartStopAlarm notification is sent when the state of osSoamDmCfgSessionStatus changes. The management entity that receives the notification … | |
| 1.3.6.1.4.1.6926.2.10.33.0.4 | NotificationosSoamPmThrCrossingAlarm | current | An osSoamPmThrCrossingAlarm notification is sent if the following conditions are met for a particular type. For an aboveAlarm five conditions need to be met: a… | |
| 1.3.6.1.4.1.6926.2.10.33.1 | NodeosSoamPmMibObjects | |||
| 1.3.6.1.4.1.6926.2.10.33.1.1 | NodeosSoamPmFlow | |||
| 1.3.6.1.4.1.6926.2.10.33.1.1.1 | TableosSoamPmFlowTable | not-accessible | current | This table is an extension of the osEthServFlowTable and rows are automatically added or deleted from this table based upon row creation and destruction of the… |
| 1.3.6.1.4.1.6926.2.10.33.1.1.1.1 | RowosSoamPmFlowEntry | not-accessible | current | The conceptual row of osSoamPmFlowTable. |
| 1.3.6.1.4.1.6926.2.10.33.1.1.1.1.1 | ColumnosSoamPmFlowOperNextIndex | read-only | current | This object contains an unused value for a PM session number on a Flow that can be used for either LM or DM sessions, or a zero to indicate that none exist. Th… |
| 1.3.6.1.4.1.6926.2.10.33.1.1.1.1.2 | ColumnosSoamPmFlowLmSinglEndResponder | read-write | current | This attribute specifies whether the Loss Measurement (LMM) single ended responder is enabled. The value 'true' indicates the single ended Loss Measurement res… |
| 1.3.6.1.4.1.6926.2.10.33.1.1.1.1.3 | ColumnosSoamPmFlowSlmSinglEndResponder | read-write | current | This attribute specifies whether the Synthetic Loss Measurement (SLM) single ended responder is enabled. The value 'true' indicates the single ended SLM respon… |
| 1.3.6.1.4.1.6926.2.10.33.1.1.1.1.4 | ColumnosSoamPmFlowDmSinglEndResponder | read-write | current | This attribute specifies whether the Delay Measurement (DMM) single ended responder is enabled. The value 'true' indicates the single ended Delay Measurement r… |
| 1.3.6.1.4.1.6926.2.10.33.1.2 | NodeosSoamPmProfiles | |||
| 1.3.6.1.4.1.6926.2.10.33.1.2.1 | TableosSoamPmGenPrflTable | not-accessible | current | This table contains Configuration Profiles both for LM and DM. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1 | RowosSoamPmGenPrflEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1.1 | ColumnosSoamPmGenPrflId | not-accessible | current | Id of the profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1.2 | ColumnosSoamPmGenPrflMessagePeriod | read-write | current | This attribute specifies the interval between Los/Delay Measurement OAM message transmission. For Los/Delay Measurement monitoring applications the default val… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1.4 | ColumnosSoamPmGenPrflFrameSize | read-write | current | This attribute specifies the size between 64 bytes and the maximum transmission unit of the EVC. The range of frame sizes from 64 through 2000 octets, in 4 oct… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1.5 | ColumnosSoamPmGenPrflDataPattern | read-write | current | This attribute specifies the data pattern included in a Data TLV when the size of the LM frame is determined by the osSoamLmFrameSize object and osSoamLmTestTl… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1.6 | ColumnosSoamPmGenPrflTestTlvIncluded | read-write | current | Indicates whether a Test TLV or Data TLV is included when the size of the LM frame is determined by the osSoamLmFrameSize object. A value of 'true' indicates t… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1.7 | ColumnosSoamPmGenPrflTestTlvPattern | read-write | current | This attribute specifies the type of test pattern to be sent in the LM frame Test TLV when the size of LM PDU is determined by the osSoamLmFrameSize object and… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1.8 | ColumnosSoamPmGenPrflMeasurementInt | read-write | current | This attribute specifies a measurement interval in minutes. A measurement interval of 15 minutes is to be supported, other intervals can be supported. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1.9 | ColumnosSoamPmGenPrflNumIntsStored | read-write | current | This attribute specifies the number of completed measurement intervals to store in the history statistic table. At least 32 completed measurement intervals are… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1.10 | ColumnosSoamPmGenPrflRepetitionPeriod | read-write | current | This object specifies a configurable repetition time between Measurement Intervals in a Loss Measurement session, in seconds. If the value is 0, there is no ti… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1.11 | ColumnosSoamPmGenPrflAlignMeasInts | read-write | current | This attribute specifies whether the measurement intervals for the Loss Measurement session are aligned with a zero offset to real time. The value 'true' indic… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1.97 | ColumnosSoamPmGenPrflLastError | read-only | current | Last configuration error description. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1.98 | ColumnosSoamPmGenPrflAdminStatus | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.33.1.2.1.1.99 | ColumnosSoamPmGenPrflOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2 | TableosSoamPmLmPrflTable | not-accessible | current | This table contains Configuration Profiles for Ethernet Loss Measurement. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2.1 | RowosSoamPmLmPrflEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2.1.1 | ColumnosSoamPmLmPrflId | not-accessible | current | Id of the profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2.1.2 | ColumnosSoamPmLmPrflType | read-write | current | This attribute specifies what type of Loss Measurement will be performed. lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked lmSlm(2) SLM SOAM … |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2.1.3 | ColumnosSoamPmLmPrflVersion | read-write | current | This attribute indicates the version of the PDUs used to perform Loss Measurement. Version 0 indicates the PDU formats defined in Y.1731-2008. Version 1 indica… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2.1.4 | ColumnosSoamPmLmPrflMeasurementEnable | read-write | current | Indicates LM Measurement values supported by the LM Profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2.1.6 | ColumnosSoamPmLmPrflAvailMeasInt | read-write | current | This attribute specifies the availability measurement interval in minutes. A measurement interval of 15 minutes is to be supported, other intervals can be supp… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2.1.8 | ColumnosSoamPmLmPrflAvailFlrThr | read-write | current | This attribute specifies a configurable availability threshold to be used in evaluating the availability/unavailability status of an availability indicator per… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2.1.9 | ColumnosSoamPmLmPrflAvailNumConsInts | read-write | current | This object specifies a configurable number of consecutive availability indicators to be used to determine a change in the availability status as indicated by … |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2.1.10 | ColumnosSoamPmLmPrflAvailNumConHighFlr | read-write | current | This attribute specifies a configurable number of consecutive FLR measurements to be used for assessing CHLI. This parameter is equivalent to the Resilency par… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2.1.11 | ColumnosSoamPmLmPrflNumSynthFramesFlr | read-write | current | This object specifies the number of consecutive synthetic loss measurement frames to use in order to calculate the frame loss ratio. This object is only valid … |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2.1.97 | ColumnosSoamPmLmPrflLastError | read-only | current | Last configuration error description. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2.1.98 | ColumnosSoamPmLmPrflAdminStatus | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.33.1.2.2.1.99 | ColumnosSoamPmLmPrflOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3 | TableosSoamPmLmThrPrflTable | not-accessible | current | This table contains the list of Loss Measurement configuration threshold values for LM Performance Monitoring. Instances of this managed object are created aut… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1 | RowosSoamPmLmThrPrflEntry | not-accessible | current | The conceptual row of osSoamPmLmThrPrflTable. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.1 | ColumnosSoamPmLmThrPrflId | not-accessible | current | Id of the profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.2 | ColumnosSoamPmLmThrPrflEnable | read-write | current | Indicates LM Thresholds notifications supported by the profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.4 | ColumnosSoamPmLmThrPrflMaxFlrFwThr | read-write | current | This object is used to set the maximum Fw frame loss ratio threshold value that will be used to determine if a threshold notification generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.5 | ColumnosSoamPmLmThrPrflAvgFlrFwThr | read-write | current | This object is used to set the average Fw frame loss ratio threshold value that will be used to determine if a threshold notification generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.7 | ColumnosSoamPmLmThrPrflMaxFlrBwThr | read-write | current | This object is used to set the maximum Bw frame loss ratio threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.8 | ColumnosSoamPmLmThrPrflAvgFlrBwThr | read-write | current | This object is used to set the average Bw frame loss ratio threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.9 | ColumnosSoamPmLmThrPrflFwHiLosThr | read-write | current | This object is used to set the Fw high loss threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.10 | ColumnosSoamPmLmThrPrflFwConHiLosThr | read-write | current | This object is used to set the consecutive Fw high loss threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.11 | ColumnosSoamPmLmThrPrflBwHiLosThr | read-write | current | This object is used to set the Bw high loss threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.12 | ColumnosSoamPmLmThrPrflBwConHiLosThr | read-write | current | This object is used to set the consecutive Bw high loss threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.13 | ColumnosSoamPmLmThrPrflFwUnavCountThr | read-write | current | This object is used to set the Fw unavailability threshold value that will be used to determine if a threshold notification generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.14 | ColumnosSoamPmLmThrPrflFwAvailRatioThr | read-write | current | This object is used to set the Fw availability/total time ratio threshold value that will be used to determine if a threshold notification generated if the rat… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.15 | ColumnosSoamPmLmThrPrflBwUnavCountThr | read-write | current | This object is used to set the Bw unavailability threshold value that will be used to determine if a threshold notification generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.16 | ColumnosSoamPmLmThrPrflBwAvailRatioThr | read-write | current | This object is used to set the Bw availability/total time ratio threshold value that will be used to determine if a threshold notification generated if the rat… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.97 | ColumnosSoamPmLmThrPrflLastError | read-only | current | Last configuration error description. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.98 | ColumnosSoamPmLmThrPrflAdminStatus | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.33.1.2.3.1.99 | ColumnosSoamPmLmThrPrflOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.33.1.2.4 | TableosSoamPmDmPrflTable | not-accessible | current | This table contains Cinfiguration Profiles for Ethernet Delay Measurement. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.4.1 | RowosSoamPmDmPrflEntry | not-accessible | current | Contains an entry of the table. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.4.1.1 | ColumnosSoamPmDmPrflId | not-accessible | current | Id of the profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.4.1.2 | ColumnosSoamPmDmPrflType | read-write | current | This attribute indicates what type of Delay Measurement to be performed. dmDmm(1) DMM SOAM PDU generated, DMR responses received (1-way or 2-way measurements) … |
| 1.3.6.1.4.1.6926.2.10.33.1.2.4.1.3 | ColumnosSoamPmDmPrflVersion | read-write | current | This attribute indicates the version of the PDUs used to perform Delay Measurement. Version 0 indicates the PDU formats defined in Y.1731-2008. Version 1 indic… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.4.1.4 | ColumnosSoamPmDmPrflMeasurementEnable | read-write | current | Indicates DM Measurement values supported by the DM Profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.4.1.5 | ColumnosSoamPmDmPrflIfdvSelOffset | read-write | current | This attribute specifies the selection offset for Inter-Frame Delay Variation measurements. If this value is set to n, then the IFDV is calculated by taking th… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.4.1.6 | ColumnosSoamPmDmPrflNuMeasBinPrFdInt | read-write | current | This attribute specifies the number of measurement bins per measurement interval for Frame Delay measurements. At least 3 bins are to be supported; at least 10… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.4.1.7 | ColumnosSoamPmDmPrflNuMeasBinPrIfdvInt | read-write | current | This attribute specifies the number of measurement bins per measurement interval for Inter-Frame Delay Variation measurements. The minimum number of measuremen… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.4.1.97 | ColumnosSoamPmDmPrflLastError | read-only | current | Last configuration error description. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.4.1.98 | ColumnosSoamPmDmPrflAdminStatus | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.33.1.2.4.1.99 | ColumnosSoamPmDmPrflOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5 | TableosSoamPmDmThrPrflTable | not-accessible | current | This table contains the list of Delay Measurement threshold configuration values for DM Performance Monitoring. Instances of this managed object are created au… |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1 | RowosSoamPmDmThrPrflEntry | not-accessible | current | The conceptual row of osSoamPmDmThrPrflTable. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.1 | ColumnosSoamPmDmThrPrflId | not-accessible | current | Id of the profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.2 | ColumnosSoamPmDmThrPrflEnable | read-write | current | Indicates DM Thresholds notifications supported by the profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.4 | ColumnosSoamPmDmThrPrflMaxFdTwThr | read-write | current | This object is used to set the maximum two-way delay threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.5 | ColumnosSoamPmDmThrPrflAvgFdTwThr | read-write | current | This object is used to set the average two-way delay threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.10 | ColumnosSoamPmDmThrPrflMaxFdFwThr | read-write | current | This object is used to set the maximum Fw delay threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.11 | ColumnosSoamPmDmThrPrflAvgFdFwThr | read-write | current | This object is used to set the average Fw delay threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.13 | ColumnosSoamPmDmThrPrflMaxIfdvFwThr | read-write | current | This object is used to set the maximum IFDV threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.14 | ColumnosSoamPmDmThrPrflAvgIfdvFwThr | read-write | current | This object is used to set the average IFDV threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.16 | ColumnosSoamPmDmThrPrflMaxFdBwThr | read-write | current | This object is used to set the maximum Bw delay threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.17 | ColumnosSoamPmDmThrPrflAvgFdBwThr | read-write | current | This object is used to set the average Bw delay threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.19 | ColumnosSoamPmDmThrPrflMaxIfdvBwThr | read-write | current | This object is used to set the maximum Bw IFDV threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.20 | ColumnosSoamPmDmThrPrflAvgIfdvBwThr | read-write | current | This object is used to set the average Bw IFDV threshold value that will be used to determine if a threshold notification is generated. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.97 | ColumnosSoamPmDmThrPrflLastError | read-only | current | Last configuration error description. |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.98 | ColumnosSoamPmDmThrPrflAdminStatus | read-write | current | . |
| 1.3.6.1.4.1.6926.2.10.33.1.2.5.1.99 | ColumnosSoamPmDmThrPrflOperStatus | read-only | current | . |
| 1.3.6.1.4.1.6926.2.10.33.1.3 | NodeosSoamPmLmObjects | |||
| 1.3.6.1.4.1.6926.2.10.33.1.3.1 | TableosSoamLmCfgTable | not-accessible | current | This table includes configuration attributes and operations for the Frame Loss Measurement function defined in [Y.1731] and [MEF SOAM-PM]. Each row in the tabl… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1 | RowosSoamLmCfgEntry | not-accessible | current | The conceptual row of osSoamLmCfgTable. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.1 | ColumnosSoamLmCfgIndex | not-accessible | current | An index to the Loss Measurement Configuration table which indicates the specific measurement session for the Flow. osSoamPmFlowOperNextIndex needs to be inspe… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.2 | ColumnosSoamLmCfgEnabled | read-create | current | This attribute specifies whether the Loss Measurement session is enabled. The value 'true' indicates the Loss Measurement session is enabled and SOAM PDUs are … |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.3 | ColumnosSoamLmCfgGenPrfl | read-create | current | Name of General Pm configuration profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.4 | ColumnosSoamLmCfgLmPrfl | read-create | current | Name of Lm Availability configuration profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.5 | ColumnosSoamLmCfgLmThrPrfl | read-create | current | Name of Lm Thrs configuration profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.6 | ColumnosSoamLmCfgDestMacAddress | read-create | current | The Target or Destination MAC Address Field to be transmitted. If osSoamPmLmPrflType is 'lmCcm', the destination MAC address is always a multicast address indi… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.7 | ColumnosSoamLmCfgDestMepId | read-create | current | The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM LM frame is to be sent. This address will… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.8 | ColumnosSoamLmCfgDestIsMepId | read-create | current | A value of 'true' indicates that MEPID of the target MEP is used for SOAM LM frame transmission. A value of 'false' indicates that the MAC address of the targe… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.9 | ColumnosSoamLmCfgStartTimeType | read-create | current | This attribute specifies the type of start time of the SOAM LM session. The start time can be disabled (none), immediate, relative, or fixed. The value of 'non… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.10 | ColumnosSoamLmCfgFixedStartDateAndTime | read-create | current | This attribute specifies the fixed start date/time for the SOAM Loss Measurement session. This attribute is used only used if osSoamLmStartTimeType is 'fixed' … |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.11 | ColumnosSoamLmCfgRelativeStartTime | read-create | current | This attribute specifies the relative start time, from the current system time, for the SOAM LM session. This attribute is used only if osSoamLmStartTimeType i… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.12 | ColumnosSoamLmCfgStopTimeType | read-create | current | This attribute specifies the type of stop time to terminate the SOAM LM session. The stop time can be forever (none), relative, or fixed. The value of 'none' i… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.13 | ColumnosSoamLmCfgFixedStopDateAndTime | read-create | current | This attribute specifies the fixed stop date/time for the SOAM Loss Measurement session. This attribute is used only used if osSoamLmStopTimeType is 'fixed' an… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.14 | ColumnosSoamLmCfgRelativeStopTime | read-create | current | This attribute specifies the relative stop time, from the session start time, to stop the SOAM LM session. This attribute is used only if osSoamLmStopTimeType … |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.15 | ColumnosSoamLmCfgSessionStatus | read-only | current | This object indicates the current status of the LM session. A value of 'active' indicates the current LM session is active. A value of 'notActive' indicates th… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.16 | ColumnosSoamLmCfgHistClear | read-create | current | This object when written clears the Loss Measurement history Table (osSoamLmHistStatsTable) - all rows are deleted. When read the value always returns 'false'.… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.17 | ColumnosSoamLmCfgRowStatus | read-create | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns are to have a valid value before a row can be activate… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.18 | ColumnosSoamLmCfgLastError | read-only | current | Last configuration error description. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.19 | ColumnosSoamLmCfgSessionStatusEx | read-only | current | This object indicates the current extended status of the LM session. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.1.1.20 | ColumnosSoamLmCfgLastHistIndx | read-only | current | The last relevant index in osSoamLmHistAvailStatsTable (osSoamLmHistAvailStatsIndex) and osSoamLmHistStatsTable (osSoamLmHistStatsIndex). |
| 1.3.6.1.4.1.6926.2.10.33.1.3.2 | TableosSoamLmMeasStatsTable | not-accessible | current | This object contains the last measured results for a SOAM Los Measurement session gathered during from the last SOAM PDU received. Each row in the table repres… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.2.1 | RowosSoamLmMeasStatsEntry | not-accessible | current | The conceptual row of osSoamLmMeasStatsTable |
| 1.3.6.1.4.1.6926.2.10.33.1.3.2.1.3 | ColumnosSoamLmMeasStatsAvailFwStatus | read-only | current | This attribute indicates the availability status (the outcome of the last availability indicator) in the Fw direction based upon the last received SOAM PDU. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.2.1.4 | ColumnosSoamLmMeasStatsAvailBwStatus | read-only | current | This attribute indicates the availability status (the outcome of the last availability indicator) in the Bw direction based upon the last received SOAM PDU. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.2.1.5 | ColumnosSoamLmMeasStatsAvailFwLastTr | read-only | current | This object indicates the time of the last transition between available and unavailable in the Fw direction. If there have been no transitions since the Loss M… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.2.1.6 | ColumnosSoamLmMeasStatsAvailBwLastTr | read-only | current | This object indicates the time of the last transition between available and unavailable in the Bw direction. If there have been no transitions since the Loss M… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.3 | TableosSoamLmLastAvailStatsTable | not-accessible | current | This object contains the last results for a SOAM Loss Measurement session for availability statistics gathered during the interval indicated by osSoamLmCfgAvai… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.3.1 | RowosSoamLmLastAvailStatsEntry | not-accessible | current | The conceptual row of osSoamLmLastAvailStatsTable |
| 1.3.6.1.4.1.6926.2.10.33.1.3.3.1.2 | ColumnosSoamLmLastAvailStatsEndTime | read-only | current | The time that the measurement interval ended. This object applies regardless of the value of osSoamPmLmPrflType. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.3.1.3 | ColumnosSoamLmLastAvailStatsElapTime | read-only | current | The length of time that the measurement interval ran for, in 0.01 seconds. This object applies regardless of the value of osSoamPmLmPrflType. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.3.1.4 | ColumnosSoamLmLastAvailStatsSuspect | read-only | current | Whether the measurement interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.3.1.5 | ColumnosSoamLmLastAvailStatsFwHiLos | read-only | current | This object is the number of high loss intervals (HLI) over time in the Fw direction. The value starts at 0 and increments for every HLI that occurs. This para… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.3.1.6 | ColumnosSoamLmLastAvailStatsBwHiLos | read-only | current | This object is the number of high loss intervals (HLI) over time in the Bw direction. The value starts at 0 and increments for every HLI that occurs. This para… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.3.1.7 | ColumnosSoamLmLastAvailStatsFwConHiLos | read-only | current | This object is the number of consecutive high loss intervals (CHLI) over time in the Fw direction. The value starts at 0 and increments for every HLI that occu… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.3.1.8 | ColumnosSoamLmLastAvailStatsBwConHiLos | read-only | current | This object is the number of consecutive high loss intervals (CHLI) over time in the Fw direction. The value starts at 0 and increments for every HLI that occu… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.3.1.9 | ColumnosSoamLmLastAvailStatsFwAvail | read-only | current | This object contains the number of availability indicators evaluated as available in the Fw direction by this Flow during this measurement interval. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.3.1.10 | ColumnosSoamLmLastAvailStatsBwAvail | read-only | current | This object contains the number of availability indicators evaluated as available in the Bw direction by this Flow during this measurement interval. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.3.1.11 | ColumnosSoamLmLastAvailStatsFwUnav | read-only | current | This object contains the number of availability indicators evaluated as unavailable in the Fw direction by this Flow during this measurement interval. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.3.1.12 | ColumnosSoamLmLastAvailStatsBwUnav | read-only | current | This object contains the number of availability indicators evaluated as unavailable in the Bw direction by this Flow during this measurement interval. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4 | TableosSoamLmLastStatsTable | not-accessible | current | This table contains the results for the current Measurement Interval in a SOAM Loss Measurement session gathered during the interval indicated by osSoamLmCfgMe… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1 | RowosSoamLmLastStatsEntry | not-accessible | current | The conceptual row of osSoamLmLastStatsTable |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.1 | ColumnosSoamLmLastStatsIndex | not-accessible | current | The index for the measurement interval within this PM session. Measurement Int indexes are assigned sequentially by the SNMP Agent. The first Measurement Int t… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.2 | ColumnosSoamLmLastStatsEndTime | read-only | current | The time that the measurement interval ended. This object applies regardless of the value of osSoamPmLmPrflType. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.3 | ColumnosSoamLmLastStatsElapTime | read-only | current | The length of time that the measurement interval ran for, in 0.01 seconds. This object applies regardless of the value of osSoamPmLmPrflType. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.4 | ColumnosSoamLmLastStatsSuspect | read-only | current | Whether the measurement interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.5 | ColumnosSoamLmLastStatsFwTxFrames | read-only | current | This attribute contains the number of frames transmitted in the Fw direction by this Flow. For a PM Session of types lmLmm and lmCcm this includes Ethernet Ser… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.6 | ColumnosSoamLmLastStatsFwRxFrames | read-only | current | This attribute contains the number of frames received in the Fw direction by this Flow. For a PM Session of types lmLmm and lmCcm this includes Ethernet Servic… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.7 | ColumnosSoamLmLastStatsFwMinFlr | read-only | current | This attribute contains the minimum one-way frame loss ratio in the Fw direction calculated by this Flow for this measurement interval. The FLR value is a rati… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.8 | ColumnosSoamLmLastStatsFwMaxFlr | read-only | current | This attribute contains the maximum one-way frame loss ratio in the Fw direction calculated by this Flow for this measurement interval. The FLR value is a rati… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.9 | ColumnosSoamLmLastStatsFwAvgFlr | read-only | current | This attribute contains the average one-way frame loss ratio in the Fw direction calculated by this Flow for this measurement interval. The FLR value is a rati… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.10 | ColumnosSoamLmLastStatsBwTxFrames | read-only | current | This attribute contains the number of frames transmitted in the Bw direction by this Flow. This attribute only applies when osSoamPmLmPrflType is lmLmm or lmSl… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.11 | ColumnosSoamLmLastStatsBwRxFrames | read-only | current | This attribute contains the number of frames received in the Bw direction by this Flow. This attribute only applies when osSoamPmLmPrflType is lmLmm or lmSlm a… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.12 | ColumnosSoamLmLastStatsBwMinFlr | read-only | current | This attribute contains the minimum one-way frame loss ratio in the Bw direction calculated by this Flow for this measurement interval. The FLR value is a rati… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.13 | ColumnosSoamLmLastStatsBwMaxFlr | read-only | current | This attribute contains the maximum one-way frame loss ratio in the Bw direction calculated by this Flow for this measurement interval. The FLR value is a rati… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.14 | ColumnosSoamLmLastStatsBwAvgFlr | read-only | current | This attribute contains the average one-way frame loss ratio in the Bw direction calculated by this Flow for this measurement interval. The FLR value is a rati… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.15 | ColumnosSoamLmLastStatsInitiatedMeas | read-only | current | This attribute contains the count of the number of measurements initiated during this measurement interval. This attribute applies when osSoamPmLmPrflType is l… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.4.1.16 | ColumnosSoamLmLastStatsReceivedMeas | read-only | current | This attribute contains the count of the number of measurements initiated in this measurement interval that have completed. This attribute only applies when os… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5 | TableosSoamLmHistAvailStatsTable | not-accessible | current | This table contains the results for availability history Measurement Ints in a SOAM Loss Measurement session. Rows of this table object are created automatical… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5.1 | RowosSoamLmHistAvailStatsEntry | not-accessible | current | The conceptual row of osSoamLmHistAvailStatsTable |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5.1.1 | ColumnosSoamLmHistAvailStatsIndex | not-accessible | current | The index for the measurement interval within this PM session. Measurement Int indexes are assigned sequentially by the SNMP Agent. The first Measurement Int t… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5.1.2 | ColumnosSoamLmHistAvailStatsEndTime | read-only | current | The time that the measurement interval ended. This object applies regardless of the value of osSoamPmLmPrflType. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5.1.3 | ColumnosSoamLmHistAvailStatsElapTime | read-only | current | The length of time that the measurement interval ran for, in 0.01 seconds. This object applies regardless of the value of osSoamPmLmPrflType. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5.1.4 | ColumnosSoamLmHistAvailStatsSuspect | read-only | current | Whether the measurement interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5.1.5 | ColumnosSoamLmHistAvailStatsFwHiLos | read-only | current | This object is the number of high loss intervals (HLI) over time in the Fw direction. The value starts at 0 and increments for every HLI that occurs. This para… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5.1.6 | ColumnosSoamLmHistAvailStatsBwHiLos | read-only | current | This object is the number of high loss intervals (HLI) over time in the Bw direction. The value starts at 0 and increments for every HLI that occurs. This para… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5.1.7 | ColumnosSoamLmHistAvailStatsFwConHiLos | read-only | current | This object is the number of consecutive high loss intervals (CHLI) over time in the Fw direction. The value starts at 0 and increments for every HLI that occu… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5.1.8 | ColumnosSoamLmHistAvailStatsBwConHiLos | read-only | current | This object is the number of consecutive high loss intervals (CHLI) over time in the Fw direction. The value starts at 0 and increments for every HLI that occu… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5.1.9 | ColumnosSoamLmHistAvailStatsFwAvail | read-only | current | This object contains the number of availability indicators evaluated as available in the Fw direction by this Flow during this measurement interval. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5.1.10 | ColumnosSoamLmHistAvailStatsBwAvail | read-only | current | This object contains the number of availability indicators evaluated as available in the Bw direction by this Flow during this measurement interval. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5.1.11 | ColumnosSoamLmHistAvailStatsFwUnav | read-only | current | This object contains the number of availability indicators evaluated as unavailable in the Fw direction by this Flow during this measurement interval. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.5.1.12 | ColumnosSoamLmHistAvailStatsBwUnav | read-only | current | This object contains the number of availability indicators evaluated as unavailable in the Bw direction by this Flow during this measurement interval. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6 | TableosSoamLmHistStatsTable | not-accessible | current | This table contains the results for history Measurement Ints in a SOAM Loss Measurement session. Rows of this table object are created automatically by the SNM… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1 | RowosSoamLmHistStatsEntry | not-accessible | current | The conceptual row of osSoamLmHistStatsTable |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.1 | ColumnosSoamLmHistStatsIndex | not-accessible | current | The index for the measurement interval within this PM session. Measurement Int indexes are assigned sequentially by the SNMP Agent. The first Measurement Int t… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.2 | ColumnosSoamLmHistStatsEndTime | read-only | current | The time that the measurement interval ended. This object applies regardless of the value of osSoamPmLmPrflType. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.3 | ColumnosSoamLmHistStatsElapTime | read-only | current | The length of time that the measurement interval ran for, in 0.01 seconds. This object applies regardless of the value of osSoamPmLmPrflType. |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.4 | ColumnosSoamLmHistStatsSuspect | read-only | current | Whether the measurement interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.5 | ColumnosSoamLmHistStatsFwTxFrames | read-only | current | This attribute contains the number of frames transmitted in the Fw direction by this Flow. For a PM Session of types lmLmm and lmCcm this includes Ethernet Ser… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.6 | ColumnosSoamLmHistStatsFwRxFrames | read-only | current | This attribute contains the number of frames received in the Fw direction by this Flow. For a PM Session of types lmLmm and lmCcm this includes Ethernet Servic… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.7 | ColumnosSoamLmHistStatsFwMinFlr | read-only | current | This attribute contains the minimum one-way frame loss ratio in the Fw direction calculated by this Flow for this measurement interval. The FLR value is a rati… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.8 | ColumnosSoamLmHistStatsFwMaxFlr | read-only | current | This attribute contains the maximum one-way frame loss ratio in the Fw direction calculated by this Flow for this measurement interval. The FLR value is a rati… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.9 | ColumnosSoamLmHistStatsFwAvgFlr | read-only | current | This attribute contains the average one-way frame loss ratio in the Fw direction calculated by this Flow for this measurement interval. The FLR value is a rati… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.10 | ColumnosSoamLmHistStatsBwTxFrames | read-only | current | This attribute contains the number of frames transmitted in the Bw direction by this Flow. This attribute only applies when osSoamPmLmPrflType is lmLmm or lmSl… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.11 | ColumnosSoamLmHistStatsBwRxFrames | read-only | current | This attribute contains the number of frames received in the Bw direction by this Flow. This attribute only applies when osSoamPmLmPrflType is lmLmm or lmSlm a… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.12 | ColumnosSoamLmHistStatsBwMinFlr | read-only | current | This attribute contains the minimum one-way frame loss ratio in the Bw direction calculated by this Flow for this measurement interval. The FLR value is a rati… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.13 | ColumnosSoamLmHistStatsBwMaxFlr | read-only | current | This attribute contains the maximum one-way frame loss ratio in the Bw direction calculated by this Flow for this measurement interval. The FLR value is a rati… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.14 | ColumnosSoamLmHistStatsBwAvgFlr | read-only | current | This attribute contains the average one-way frame loss ratio in the Bw direction calculated by this Flow for this measurement interval. The FLR value is a rati… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.15 | ColumnosSoamLmHistStatsInitiatedMeas | read-only | current | This attribute contains the count of the number of measurements initiated during this measurement interval. This attribute applies when osSoamPmLmPrflType is l… |
| 1.3.6.1.4.1.6926.2.10.33.1.3.6.1.16 | ColumnosSoamLmHistStatsReceivedMeas | read-only | current | This attribute contains the count of the number of measurements initiated in this measurement interval that have completed. This attribute only applies when os… |
| 1.3.6.1.4.1.6926.2.10.33.1.4 | NodeosSoamPmDmObjects | |||
| 1.3.6.1.4.1.6926.2.10.33.1.4.1 | TableosSoamDmCfgTable | not-accessible | current | This table includes configuration attributes and operations for the Delay Measurement function. Each row in the table represents a Delay Measurement session fo… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1 | RowosSoamDmCfgEntry | not-accessible | current | The conceptual row of osSoamDmCfgTable. |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.1 | ColumnosSoamDmCfgIndex | not-accessible | current | An index to the Delay Measurement Configuration table which indicates the specific measurement session for the Flow. osSoamPmFlowOperNextIndex needs to be insp… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.2 | ColumnosSoamDmCfgEnabled | read-create | current | This attribute specifies whether the Delay Measurement session is enabled. The value 'true' indicates the Delay Measurement session is enabled AND SOAM PDUs ar… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.3 | ColumnosSoamDmCfgGenPrfl | read-create | current | Name of General Pm configuration profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.4 | ColumnosSoamDmCfgDmPrfl | read-create | current | Name of Dm configuration profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.5 | ColumnosSoamDmCfgDmThrPrfl | read-create | current | Name of Dm Thr configuration profile. |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.6 | ColumnosSoamDmCfgDestMacAddress | read-create | current | The Target or Destination MAC Address Field to be transmitted. If osSoamPmDmPrflType is 'dmDmm', the destination address is to be the unicast address of the de… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.7 | ColumnosSoamDmCfgDestMepId | read-create | current | The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM DM frame is to be sent. This address will… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.8 | ColumnosSoamDmCfgDestIsMepId | read-create | current | A value of 'true' indicates that MEPID of the target MEP is used for SOAM LM frame transmission. A value of 'false' indicates that the MAC address of the targe… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.9 | ColumnosSoamDmCfgSourceMacAddress | read-create | current | The Source MAC Address Field of the received SOAM DM session PDUs. If osSoamPmDmPrflType is dm1DmRx this object indicates the source address of the dm1DmTx DM … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.10 | ColumnosSoamDmCfgStartTimeType | read-create | current | This object specifies the type of start time of the SOAM DM session. The start time can be disabled (none), immediate, relative, or fixed. The value of 'none' … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.11 | ColumnosSoamDmCfgFixedStartDateAndTime | read-create | current | This object specifies the fixed start date/time for the SOAM Delay Measurement session. This object is used only used if osSoamDmCfgStartTimeType is 'fixed' an… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.12 | ColumnosSoamDmCfgRelativeStartTime | read-create | current | This object specifies the relative start time, from the current system time, for the SOAM DM session. This object is used only if osSoamDmCfgStartTimeType is '… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.13 | ColumnosSoamDmCfgStopTimeType | read-create | current | This object specifies the type of stop time to terminate the SOAM DM session. The stop time can be forever (none), relative, or fixed. The value of 'none' indi… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.14 | ColumnosSoamDmCfgFixedStopDateAndTime | read-create | current | This object specifies the fixed stop date/time for the SOAM Delay Measurement session. This object is used only used if osSoamDmCfgStopTimeType is 'fixed' and … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.15 | ColumnosSoamDmCfgRelativeStopTime | read-create | current | This object specifies the relative stop time, from the session start time, to stop the SOAM DM session. This object is used only if osSoamDmCfgStopTimeType is … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.16 | ColumnosSoamDmCfgSessionStatus | read-only | current | This object indicates the current status of the DM session. A value of 'active' indicates the current DM session is active. A value of 'notActive' indicates th… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.17 | ColumnosSoamDmCfgHistClear | read-create | current | This object when written clears the Delay Measurement history tables (osSoamDmHistStatsTable and osSoamDmHistStatsBinsTable) - all rows are deleted. When read … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.18 | ColumnosSoamDmCfgRowStatus | read-create | current | The status of the row. The writable columns in a row cannot be changed if the row is active. All columns are to have a valid value before a row can be activate… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.19 | ColumnosSoamDmCfgLastError | read-only | current | Last configuration error description. |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.20 | ColumnosSoamDmCfgSessionStatusEx | read-only | current | This object indicates the current extended status of the DM session. |
| 1.3.6.1.4.1.6926.2.10.33.1.4.1.1.21 | ColumnosSoamDmCfgLastHistIndx | read-only | current | The last relevant index in osSoamDmHistStatsTable (osSoamDmHistStatsIndex). |
| 1.3.6.1.4.1.6926.2.10.33.1.4.2 | TableosSoamDmCfgMeasBinTable | not-accessible | current | This table includes configuration attributes for the Delay Measurement bins to collect stats. Each row in the table is automatically created when the Delay Mea… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.2.1 | RowosSoamDmCfgMeasBinEntry | not-accessible | current | The conceptual row of osSoamDmCfgMeasBinTable. |
| 1.3.6.1.4.1.6926.2.10.33.1.4.2.1.1 | ColumnosSoamDmCfgMeasBinType | not-accessible | current | This attribute specifies whether the bin number is for Frame Delay or Inter-Frame Delay Variation. |
| 1.3.6.1.4.1.6926.2.10.33.1.4.2.1.2 | ColumnosSoamDmCfgMeasBinPrflId | read-create | current | Name of Bins configuration profile that is found in osProvBinPrflTable. |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4 | TableosSoamDmLastStatsTable | not-accessible | current | This table contains the results for the current Measurement Interval in a SOAM Delay Measurement session gathered. A row of this table is created or updated au… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1 | RowosSoamDmLastStatsEntry | not-accessible | current | The conceptual row of osSoamDmLastStatsTable |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.1 | ColumnosSoamDmLastStatsIndex | read-only | current | The last relevant index in osSoamDmHistStatsTable (osSoamDmHistStatsIndex). |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.2 | ColumnosSoamDmLastStatsEndTime | read-only | current | The time that the measurement interval ended. This object applies regardless of the value of osSoamPmDmPrflType. |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.3 | ColumnosSoamDmLastStatsElapTime | read-only | current | The length of time that the measurement interval ran for, in 0.01 seconds. This object applies regardless of the value of osSoamPmDmPrflType. |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.4 | ColumnosSoamDmLastStatsSuspect | read-only | current | Whether the measurement interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.5 | ColumnosSoamDmLastStatsFdTwMin | read-only | current | This attribute contains the minimum two-way frame delay calculated by this Flow for this measurement interval. This attribute is undefined is osSoamPmDmPrflTyp… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.6 | ColumnosSoamDmLastStatsFdTwMax | read-only | current | This attribute contains the maximum two-way frame delay calculated by this Flow for this measurement interval. This attribute is undefined is osSoamPmDmPrflTyp… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.7 | ColumnosSoamDmLastStatsFdTwAvg | read-only | current | This attribute contains the average two-way frame delay calculated by this Flow for this measurement interval. This attribute is undefined is osSoamPmDmPrflTyp… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.8 | ColumnosSoamDmLastStatsFdFwMin | read-only | current | This attribute contains the minimum one-way frame delay in the Fw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyn… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.9 | ColumnosSoamDmLastStatsFdFwMax | read-only | current | This attribute contains the maximum one-way frame delay in the Fw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyn… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.10 | ColumnosSoamDmLastStatsFdFwAvg | read-only | current | This attribute contains the average one-way frame delay in the Fw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyn… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.11 | ColumnosSoamDmLastStatsFdBwMin | read-only | current | This attribute contains the minimum one-way frame delay in the Bw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyn… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.12 | ColumnosSoamDmLastStatsFdBwMax | read-only | current | This attribute contains the maximum one-way frame delay in the Bw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyn… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.13 | ColumnosSoamDmLastStatsFdBwAvg | read-only | current | This attribute contains the average one-way frame delay in the Bw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyn… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.14 | ColumnosSoamDmLastStatsIfdvFwMin | read-only | current | This attribute contains the minimum one-way inter-frame delay interval in the Fw direction calculated by this Flow for this measurement interval. The value of … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.15 | ColumnosSoamDmLastStatsIfdvFwMax | read-only | current | This attribute contains the maximum one-way inter-frame delay interval in the Fw direction calculated by this Flow for this measurement interval. The value of … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.16 | ColumnosSoamDmLastStatsIfdvFwAvg | read-only | current | This attribute contains the average one-way inter-frame delay interval in the Fw direction calculated by this Flow for this measurement interval. The value of … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.17 | ColumnosSoamDmLastStatsIfdvBwMin | read-only | current | This attribute contains the minimum one-way inter-frame delay interval in the Bw direction calculated by this Flow for this measurement interval. The value of … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.18 | ColumnosSoamDmLastStatsIfdvBwMax | read-only | current | This attribute contains the maximum one-way inter-frame delay interval in the Bw direction calculated by this Flow for this measurement interval. The value of … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.19 | ColumnosSoamDmLastStatsIfdvBwAvg | read-only | current | This attribute contains the average one-way inter-frame delay interval in the Bw direction calculated by this Flow for this measurement interval. The value of … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.23 | ColumnosSoamDmLastStatsInitiatedMeas | read-only | current | This attribute contains the count of the number of measurements initiated during this measurement interval. This attribute applies when osSoamPmDmPrflType is d… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.4.1.24 | ColumnosSoamDmLastStatsReceivedMeas | read-only | current | This attribute contains the count of the number of measurements initiated in this measurement interval that have completed. This attribute applies when osSoamP… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.5 | TableosSoamDmLastStatsBinsTable | not-accessible | current | This table contains the result bins for the current Measurement Interval in a SOAM Delay Measurement session. Each row in the table represents the current bin … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.5.1 | RowosSoamDmLastStatsBinsEntry | not-accessible | current | The conceptual row of osSoamDmLastStatsBinsTable |
| 1.3.6.1.4.1.6926.2.10.33.1.4.5.1.1 | ColumnosSoamDmLastStatsBinsCounter | read-only | current | This attribute contains the count of the number of completed measurements initiated in this measurement interval whose value falls within the range specified f… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6 | TableosSoamDmHistStatsTable | not-accessible | current | This table contains the results for history Measurement Ints in a SOAM Delay Measurement session. Rows of this table are created automatically by the SNMP Agen… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1 | RowosSoamDmHistStatsEntry | not-accessible | current | The conceptual row of osSoamDmHistStatsTable |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.1 | ColumnosSoamDmHistStatsIndex | not-accessible | current | The index for the measurement interval within this PM session. Measurement Int indexes are assigned sequentially by the SNMP Agent. The first Measurement Int t… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.2 | ColumnosSoamDmHistStatsEndTime | read-only | current | The time that the measurement interval ended. This object applies regardless of the value of osSoamPmDmPrflType. |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.3 | ColumnosSoamDmHistStatsElapTime | read-only | current | The length of time that the measurement interval ran for, in 0.01 seconds. This object applies regardless of the value of osSoamPmDmPrflType. |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.4 | ColumnosSoamDmHistStatsSuspect | read-only | current | Whether the measurement interval has been marked as suspect. The object is set to true when there is a discontinuity in the performance measurements during the… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.5 | ColumnosSoamDmHistStatsFdTwMin | read-only | current | This attribute contains the minimum two-way frame delay calculated by this Flow for this measurement interval. This attribute is undefined is osSoamPmDmPrflTyp… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.6 | ColumnosSoamDmHistStatsFdTwMax | read-only | current | This attribute contains the maximum two-way frame delay calculated by this Flow for this measurement interval. This attribute is undefined is osSoamPmDmPrflTyp… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.7 | ColumnosSoamDmHistStatsFdTwAvg | read-only | current | This attribute contains the average two-way frame delay calculated by this Flow for this measurement interval. This attribute is undefined is osSoamPmDmPrflTyp… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.8 | ColumnosSoamDmHistStatsFdFwMin | read-only | current | This attribute contains the minimum one-way frame delay in the Fw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyn… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.9 | ColumnosSoamDmHistStatsFdFwMax | read-only | current | This attribute contains the maximum one-way frame delay in the Fw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyn… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.10 | ColumnosSoamDmHistStatsFdFwAvg | read-only | current | This attribute contains the average one-way frame delay in the Fw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyn… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.11 | ColumnosSoamDmHistStatsFdBwMin | read-only | current | This attribute contains the minimum one-way frame delay in the Bw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyn… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.12 | ColumnosSoamDmHistStatsFdBwMax | read-only | current | This attribute contains the maximum one-way frame delay in the Bw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyn… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.13 | ColumnosSoamDmHistStatsFdBwAvg | read-only | current | This attribute contains the average one-way frame delay in the Bw direction calculated by this Flow for this measurement interval if the osSoamPmDmPrflClockSyn… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.14 | ColumnosSoamDmHistStatsIfdvFwMin | read-only | current | This attribute contains the minimum one-way inter-frame delay interval in the Fw direction calculated by this Flow for this measurement interval. The value of … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.15 | ColumnosSoamDmHistStatsIfdvFwMax | read-only | current | This attribute contains the maximum one-way inter-frame delay interval in the Fw direction calculated by this Flow for this measurement interval. The value of … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.16 | ColumnosSoamDmHistStatsIfdvFwAvg | read-only | current | This attribute contains the average one-way inter-frame delay interval in the Fw direction calculated by this Flow for this measurement interval. The value of … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.17 | ColumnosSoamDmHistStatsIfdvBwMin | read-only | current | This attribute contains the minimum one-way inter-frame delay interval in the Bw direction calculated by this Flow for this measurement interval. The value of … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.18 | ColumnosSoamDmHistStatsIfdvBwMax | read-only | current | This attribute contains the maximum one-way inter-frame delay interval in the Bw direction calculated by this Flow for this measurement interval. The value of … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.19 | ColumnosSoamDmHistStatsIfdvBwAvg | read-only | current | This attribute contains the average one-way inter-frame delay interval in the Bw direction calculated by this Flow for this measurement interval. The value of … |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.23 | ColumnosSoamDmHistStatsInitiatedMeas | read-only | current | This attribute contains the count of the number of measurements initiated during this measurement interval. This attribute applies when osSoamPmDmPrflType is d… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.6.1.24 | ColumnosSoamDmHistStatsReceivedMeas | read-only | current | This attribute contains the count of the number of measurements initiated in this measurement interval that have completed. This attribute applies when osSoamP… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.7 | TableosSoamDmHistStatsBinsTable | not-accessible | current | This table contains the result bins for the history Measurement Ints in a SOAM Delay Measurement session. Rows of this table are created automatically by the S… |
| 1.3.6.1.4.1.6926.2.10.33.1.4.7.1 | RowosSoamDmHistStatsBinsEntry | not-accessible | current | The conceptual row of osSoamDmHistStatsBinsTable |
| 1.3.6.1.4.1.6926.2.10.33.1.4.7.1.1 | ColumnosSoamDmHistStatsBinsCounter | read-only | current | This attribute contains the count of the number of completed measurements initiated in this measurement interval whose value falls within the range specified f… |
| 1.3.6.1.4.1.6926.2.10.33.1.5 | NodeosSoamPmNotifCfg | |||
| 1.3.6.1.4.1.6926.2.10.33.1.5.1 | ScalarosSoamPmNotifCfgAlarmInt | read-write | current | A value indicating the shortest time interval in seconds between the generation of the same notification type per PM session to the list of notification destin… |
| 1.3.6.1.4.1.6926.2.10.33.1.5.2 | ScalarosSoamPmNotifCfgAlarmEnable | read-write | current | A vector of bits that indicates whether a specific notification is enabled. A bit set to '1' enables the specific notification generation. A bit set to '0' dis… |
| 1.3.6.1.4.1.6926.2.10.33.1.6 | NodeosSoamPmNotifObj | |||
| 1.3.6.1.4.1.6926.2.10.33.1.6.1 | ScalarosSoamPmNotifObjDateAndTime | accessible-for-notify | current | This object contains the time and date at the time that the notification event is detected, not the time of the notification generation. This object is used on… |
| 1.3.6.1.4.1.6926.2.10.33.1.6.2 | ScalarosSoamPmNotifObjThrId | accessible-for-notify | current | The Object Identifier of the object that caused the generation of the notification from the osSoamLmThrEntry or osSoamDmThrEntry. This object is only used for … |
| 1.3.6.1.4.1.6926.2.10.33.1.6.3 | ScalarosSoamPmNotifObjThrConfig | accessible-for-notify | current | The configured threshold value of the object that caused the generation of the notification. This object is only used for the notification. |
| 1.3.6.1.4.1.6926.2.10.33.1.6.4 | ScalarosSoamPmNotifObjThrValue | accessible-for-notify | current | The measured value of the object at the time of the generation of the Notification, from the osSoamLmMeasStatsTable, osSoamLmCurStatsTable, osSoamLmCurAvailSta… |
| 1.3.6.1.4.1.6926.2.10.33.1.6.5 | ScalarosSoamPmNotifObjSuspect | accessible-for-notify | current | The suspect flag for the current measurement interval in which the notification was generated from the osSoamLmCurStatsTable, osSoamLmCurAvailStatsTable, or os… |
| 1.3.6.1.4.1.6926.2.10.33.1.6.6 | ScalarosSoamPmNotifObjCrossingType | accessible-for-notify | current | The Notification Crossing Type of the object that caused the generation of the notification from the osSoamLmThrEntry or osSoamDmThrEntry. aboveAlarm(1) indica… |
| 1.3.6.1.4.1.6926.2.10.33.2 | NodeosSoamPmMibConformance | |||
| 1.3.6.1.4.1.6926.2.10.33.2.1 | NodeosSoamPmMibCompliances | |||
| 1.3.6.1.4.1.6926.2.10.33.2.1.1 | ComplianceosSoamPmMibCompliance | current | The compliance statement for the Ethernet Service OAM PM MIB. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2 | NodeosSoamPmMibGroups | |||
| 1.3.6.1.4.1.6926.2.10.33.2.2.1 | GrouposSoamPmFlowMandGroup | current | Mandatory objects for the Service OAM PM Flow group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.2 | GrouposSoamPmFlowOptGroup | current | Optional objects for the Service OAM Service OAM PM Flow group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.3 | GrouposSoamPmGenPrflMandGroup | current | Mandatory objects for the Service OAM General (LM and DM) Profile group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.4 | GrouposSoamPmGenPrflOptGroup | current | Optional objects for the Service OAM General (LM and DM) Profile group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.5 | GrouposSoamPmLmPrflMandGroup | current | Mandatory objects for the Service OAM LM Profile group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.6 | GrouposSoamPmLmPrflOptGroup | current | Optional objects for the Service OAM LM Profile group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.7 | GrouposSoamPmLmThrPrflMandGroup | current | Mandatory objects for the Service OAM LM Thr Profile group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.8 | GrouposSoamPmLmThrPrflOptGroup | current | Optional objects for the Service OAM LM Thr Profile group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.9 | GrouposSoamPmDmPrflMandGroup | current | Mandatory objects for the Service OAM DM Profile group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.10 | GrouposSoamPmDmPrflOptGroup | current | Optional objects for the Service OAM DM Profile group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.11 | GrouposSoamPmDmThrPrflMandGroup | current | Mandatory objects for the Service OAM DM Thr Profile group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.13 | GrouposSoamLmCfgMandGroup | current | Mandatory objects for the Service OAM LM Configuration group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.15 | GrouposSoamLmMeasStatsMandGroup | current | Mandatory objects for the Service OAM LM MeasuredStats group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.16 | GrouposSoamLmMeasStatsOptGroup | current | Optional objects for the Service OAM LM MeasuredStats group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.21 | GrouposSoamLmHistAvailStatsMandGroup | current | Mandatory objects for the Service OAM Availability LM history statistics group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.22 | GrouposSoamLmHistAvailStatsOptGroup | current | Optional objects for the Service OAM Availability LM history statistics group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.23 | GrouposSoamLmHistStatsMandGroup | current | Mandatory objects for the Service OAM LM history statistics group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.24 | GrouposSoamLmHistStatsOptGroup | current | Optional objects for the Service OAM LM Hist Stats group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.25 | GrouposSoamDmCfgMandGroup | current | Mandatory objects for the Service OAM DM configuration group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.26 | GrouposSoamDmCfgOptGroup | current | Optional objects for the Service OAM DM Configuration group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.27 | GrouposSoamDmCfgMeasBinMandGroup | current | Mandatory objects for the Service OAM DM measurement bin configuration group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.32 | GrouposSoamDmHistStatsMandGroup | current | Mandatory objects for the Service OAM DM history statistics group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.34 | GrouposSoamDmHistStatsBinsMandGroup | current | Mandatory objects for the Service OAM DM history statistics bin group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.39 | GrouposSoamPmNotifsMandGroup | current | Mandatory notifications for the SOAM PM Notifications group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.40 | GrouposSoamPmNotifsOptGroup | current | Optional objects for the Service OAM PM Notifications group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.41 | GrouposSoamPmNotifCfgMandGroup | current | Mandatory objects for the SOAM PM Notification Configuration group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.42 | GrouposSoamPmNotifObjMandGroup | current | Mandatory objects for the SOAM PM Notification Object group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.43 | GrouposSoamPmNotifObjOptGroup | current | Optional objects for the Service OAM PM Notifications group. | |
| 1.3.6.1.4.1.6926.2.10.33.2.2.44 | GrouposSoamPmCapabilMandGroup | current | Mandatory objects for the Service OAM PM Capabilities group. | |
| 1.3.6.1.4.1.6926.2.10.33.3 | NodeosSoamPmCapabilities | |||
| 1.3.6.1.4.1.6926.2.10.33.3.1 | ScalarosSoamPmSupported | read-only | current | Indicates if SOAM PM test is supported by hardware or not: false - hardware doesn't support SOAM PM test true - hardware supports SOAM PM test |
| 1.3.6.1.4.1.6926.2.10.33.3.2 | ScalarosSoamPmLmCaps | read-only | current | Indicates supported values of LM Measurement. |
| 1.3.6.1.4.1.6926.2.10.33.3.3 | ScalarosSoamPmLmThrCaps | read-only | current | Indicates supported values for LM Thresholds notification. |
| 1.3.6.1.4.1.6926.2.10.33.3.4 | ScalarosSoamPmDmCaps | read-only | current | Indicates supported values for DM Measurement. |
| 1.3.6.1.4.1.6926.2.10.33.3.5 | ScalarosSoamPmDmThrCaps | read-only | current | Indicates supported values for DM Thresholds notification. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SoamDmCapabilities | BITS { bInitiatedMeasurementCounter(0), bReceivedMeasurementCounter(1), bFdTwBins(2), bFdTwMin(3), bFdTwMax(4), bFdTwAvg(5), bFdFwBins(6), bFdFwMin(7), bFdFwMax(8), bFdFwAvg(9), bFdBwBins(10), bFdBwMin(11), bFdBwMax(12), bFdBwAvg(13), bIfdvFwBins(14), bIfdvFwMin(15), bIfdvFwMax(16), bIfdvFwAvg(17), bIfdvBwBins(18), bIfdvBwMin(19), bIfdvBwMax(20), bIfdvBwAvg(21), bIfdvTwBins(22), bIfdvTwMin(23), bIfdvTwMax(24), bIfdvTwAvg(25), bMeasStatsFdTw(26), bMeasStatsFdFw(27), bMeasStatsFdBw(28), bMeasStatsIfdvTw(29), bMeasStatsIfdvFw(30), bMeasStatsIfdvBw(31) } | current | A vector of bits that indicates the type of SOAM DM counters that are enabled. A bit set to '1' enables the specific SOAM DM counter. A bit set to '0' disables the SOAM DM counter. If a particular SOAM DM counter is not… |
| SoamDmThrCapabilities | BITS { bOsSoamDmMaxFdTwThr(0), bOsSoamDmAvgFdTwThr(1), bOsSoamDmMaxFdFwThr(2), bOsSoamDmAvgFdFwThr(3), bOsSoamDmMaxFdBwThr(4), bOsSoamDmAvgFdBwThr(5), bOsSoamDmMaxIfdvFwThr(6), bOsSoamDmAvgIfdvFwThr(7), bOsSoamDmMaxIfdvBwThr(8), bOsSoamDmAvgIfdvBwThr(9) } | current | A vector of bits that indicates the type of SOAM DM threshold notifications that are enabled. A bit set to '1' enables the specific SOAM DM threshold notification and when the specific counter is enabled and the thresho… |
| SoamLmCapabilities | BITS { bForwardTransmitedFrames(0), bForwardReceivedFrames(1), bForwardMinFlr(2), bForwardMaxFlr(3), bForwardAvgFlr(4), bBackwardTransmitedFrames(5), bBackwardReceivedFrames(6), bBackwardMinFlr(7), bBackwardMaxFlr(8), bBackwardAvgFlr(9), bInitiatedMeasurements(10), bReceivedMeasurements (11), bAvailForwardHighLoss(12), bAvailForwardConsHighLoss(13), bAvailForwardAvailable(14), bAvailForwardUnavailable(15), bAvailBackwardHighLoss(16), bAvailBackwardConsHighLoss(17), bAvailBackwardAvailable(18), bAvailBackwardUnavailable(19), bMeasStatsForwardMeasuredFlr(20), bMeasStatsBackwardMeasuredFlr(21), bMeasStatsAvailForwardStatus(22), bMeasStatsAvailBackwardStatus(23) } | current | A vector of bits that indicates the type of SOAM LM counters found in the osSoamLmHistStatsTable that are enabled. A bit set to '1' enables the specific SOAM LM counter. A bit set to '0' disables the SOAM LM counter. If… |
| SoamLmThrCapabilities | BITS { bOsSoamLmMaxFlrFwThr(0), bOsSoamLmAvgFlrFwThr(1), bOsSoamLmMaxFlrBwThr(2), bOsSoamLmAvgFlrBwThr(3), bOsSoamLmFwHiLosThr(4), bOsSoamLmBwHiLosThr(5), bOsSoamLmFwConHiLosThr(6), bOsSoamLmBwConHiLosThr(7), bOsSoamLmUnavFwThr(8), bOsSoamLmUnavBwThr(9), bOsSoamLmAvailRatioFwThr(10), bOsSoamLmAvailRatioBwThr(11) } | current | A vector of bits that indicates the type of SOAM LM thresholds notifications that are enabled. A bit set to '1' enables the specific SOAM LM threshold notification and when the specific counter is enabled and the thresh… |
| SoamTcStatusExType | INTEGER { active(1), notActive(2), waitForTimeAlign(3), waitForPortInit(4), waitForRmep(5), waitForFpgaUpgrade(6), waitForLmResponder(7) } | current | This enumeration data type defines the extension status of PM session of a MEP. The valid enumerated values associated with this type are: active(1) - the test is active notActive(2) - the test is not active, because it… |