MIB Viewer

RAD-Clock-MIB

406 objects
Clock MIB.
Imported Objects
IF-MIBifAlias ifIndex
INET-ADDRESS-MIBInetAddress InetAddressType
Q-BRIDGE-MIBVlanIdOrAnyOrNone
RAD-GEN-MIBalarmEventAttrDescription alarmEventAttrName alarmEventConfigSeverity alarmEventLogAlarmOrEventId alarmEventLogDateAndTime alarmEventLogDescription alarmEventLogSeverity alarmEventLogSourceName alarmEventReason systemPort systemsEvents
RAD-Pw-MIBpeerAddress
RAD-SMI-MIBagnt
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-MIBsysName
SNMPv2-SMICounter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime MacAddress RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.164.6.1.0.28NotificationagnClkSrcStateChangeTrapcurrentThe trap is sent upon change in Recovery Clock State.
1.3.6.1.4.1.164.6.1.0.30NotificationagnCurrClkStateChangeTrapcurrentThe trap is sent upon change in the state of the current (active) clock, when it is a Recovery Clock.
1.3.6.1.4.1.164.6.1.0.31NotificationagnClkSrcFrequencyAlarmTrapcurrentThe trap is sent upon Recovered Clock Frequency alarm.
1.3.6.1.4.1.164.6.2.15.9NodegnssPort
1.3.6.1.4.1.164.6.2.15.9.0NodegnssEvents
1.3.6.1.4.1.164.6.2.15.9.0.1NotificationgnssNotLockedcurrentThis trap indicates GNSS state change.
1.3.6.1.4.1.164.6.2.15.9.0.2NotificationgnssHardwareFailurecurrentThis trap indicates Hardware Failure and its reason.
1.3.6.1.4.1.164.6.2.15.9.1TablegnssConfigTablenot-accessiblecurrentA table of GNSS configuration entries.
1.3.6.1.4.1.164.6.2.15.9.1.1RowgnssConfigEntrynot-accessiblecurrentGNSS configuration entry.
1.3.6.1.4.1.164.6.2.15.9.1.1.1ColumngnssConfigAntennaDelayread-writecurrentConfigure antenna cable delay
1.3.6.1.4.1.164.6.2.15.9.1.1.2ColumngnssConfigElevationMaskMinread-writecurrentMinimum elevation angle.
1.3.6.1.4.1.164.6.2.15.9.1.1.3ColumngnssConfigModePrimaryread-writecurrentGNSS selected as primary. The value notApplicable (1) is not allowed.
1.3.6.1.4.1.164.6.2.15.9.1.1.4ColumngnssConfigModeSecondaryread-writecurrentGNSS selected as secondary, if primary is not available.
1.3.6.1.4.1.164.6.2.15.9.1.1.5ColumngnssConfigPositionread-writecurrentPositioning mode
1.3.6.1.4.1.164.6.2.15.9.1.1.6ColumngnssConfigLatituderead-writecurrentApplicable only when gnssConfigPosition = manual.
1.3.6.1.4.1.164.6.2.15.9.1.1.7ColumngnssConfigLongituderead-writecurrentApplicable only when gnssConfigPosition = manual.
1.3.6.1.4.1.164.6.2.15.9.1.1.8ColumngnssConfigHeightread-writecurrentApplicable only when gnssConfigPosition = manual.
1.3.6.1.4.1.164.6.2.15.9.2TablegnssStatusTablenot-accessiblecurrentA table of GNSS status entries.
1.3.6.1.4.1.164.6.2.15.9.2.1RowgnssStatusEntrynot-accessiblecurrentPosition data and status
1.3.6.1.4.1.164.6.2.15.9.2.1.1ColumngnssStatusModeread-onlycurrentActual GNSS used
1.3.6.1.4.1.164.6.2.15.9.2.1.2ColumngnssStatusTrackingread-onlycurrentGNSS tracking status: notTracking (1): Not tracking satellite. trackingSatellites (2): Tracking satellite. gpsLocked (3): GNSS locked. todLocked (4): TOD locke…
1.3.6.1.4.1.164.6.2.15.9.2.1.3ColumngnssStatusLatituderead-onlycurrentLatitude coordinates, formatted ndd:mm:ss.sss or sdd:mm:ss.sss (n=north / s=south, dd=degrees, mm=minutes, ss=seconds)
1.3.6.1.4.1.164.6.2.15.9.2.1.4ColumngnssStatusLongituderead-onlycurrentLongitude coordinates, formatted eddd:mm:ss.sss or wddd:mm:ss.sss (e=east/ w=west, dd=degrees, mm=minutes, ss=seconds)
1.3.6.1.4.1.164.6.2.15.9.2.1.5ColumngnssStatusHeightread-onlycurrentAltitude in millimmeters
1.3.6.1.4.1.164.6.2.15.9.2.1.6ColumngnssStatusHardwareFailReasonread-onlycurrentEach bit represent poissible GNSS port hardware failure reason. when no failure, the value will be 0.
1.3.6.1.4.1.164.6.2.15.9.3TablegnssSatelliteTablenot-accessiblecurrentA table of GNSS satellites status entries.
1.3.6.1.4.1.164.6.2.15.9.3.1RowgnssSatelliteEntrynot-accessiblecurrentGNSS satellites status entry.
1.3.6.1.4.1.164.6.2.15.9.3.1.1ColumngnssSatelliteIndexnot-accessiblecurrentrunning index of the satellite table.
1.3.6.1.4.1.164.6.2.15.9.3.1.2ColumngnssSatelliteNumberread-onlycurrentSatelite number.
1.3.6.1.4.1.164.6.2.15.9.3.1.3ColumngnssSatelliteSnrread-onlycurrentSatellite Signal to Noise Ratio
1.3.6.1.4.1.164.6.2.15.9.3.1.4ColumngnssSatelliteHealthyread-onlycurrentSatellite health status.
1.3.6.1.4.1.164.6.2.15.9.3.1.5ColumngnssSatelliteAzimuthread-onlycurrentAzimuth to satellite
1.3.6.1.4.1.164.6.2.15.9.3.1.6ColumngnssSatelliteElevationread-onlycurrentSatellite elevation angle
1.3.6.1.4.1.164.6.2.52IdentityagnClockSourceClock MIB.
1.3.6.1.4.1.164.6.2.52.0NodeclockEvents
1.3.6.1.4.1.164.6.2.52.0.1NotificationclockDomainSystemClockUnlockcurrentDomain system clock state changed to one of: freerun, holdover or locked.
1.3.6.1.4.1.164.6.2.52.0.3NotificationclockDomainStationClockQlLowcurrentDomain clock quality level below minimum.
1.3.6.1.4.1.164.6.2.52.0.4NotificationsourceClockFailurecurrentSource Clock Failure.
1.3.6.1.4.1.164.6.2.52.0.7NotificationstationClockLoscurrentLoss of signal (LOS).
1.3.6.1.4.1.164.6.2.52.0.8NotificationclockDomainStationClockUnlockcurrentDomain station clock state changed to unlocked.
1.3.6.1.4.1.164.6.2.52.0.10NotificationptpRecoveredNoPtpMastercurrentThis Notification indicates No PTP Master
1.3.6.1.4.1.164.6.2.52.0.11NotificationptpRecoveredInvalidFreqAccuracycurrentThis Notification indicates Unacceptable Frequency Accuracy
1.3.6.1.4.1.164.6.2.52.0.12NotificationptpRecoveredInvalidTimeAccuracycurrentThis Notification indicates Unacceptable Time Accuracy
1.3.6.1.4.1.164.6.2.52.0.13NotificationptpRecoveredDisqualifiedMastercurrentThis Notification indicates Master Disqualification
1.3.6.1.4.1.164.6.2.52.0.14NotificationptpRecoveredMasterSyncFailcurrentThis Notification indicates Master Sync Failure
1.3.6.1.4.1.164.6.2.52.0.15NotificationptpRecoveredMasterAnnounceFailcurrentThis Notification indicates Master Announce Failure
1.3.6.1.4.1.164.6.2.52.0.16NotificationptpRecoveredMasterDelayRespFailcurrentThis Notification indicates Master Delay Response Failure
1.3.6.1.4.1.164.6.2.52.0.17NotificationptpRecoveredPtpStateChangecurrentThis Notification indicates that there was a change in the 1588 state machine.
1.3.6.1.4.1.164.6.2.52.0.18NotificationptpRecoveredSevereFreqConditioncurrentThis Notification indicates that network conditions might cause frequency recovery degradation.
1.3.6.1.4.1.164.6.2.52.0.19NotificationptpRecoveredSevereTimeConditioncurrentThis Notification indicates that network conditions might cause time recovery degradation.
1.3.6.1.4.1.164.6.2.52.0.20NotificationptpRecoveredMasterSwitchovercurrentThis Notification indicates that a switchover to another PTP master occured.
1.3.6.1.4.1.164.6.2.52.0.21NotificationptpRecoveredMasterUnicastNegFailcurrentThis Notification indicates unicast negotiation failure
1.3.6.1.4.1.164.6.2.52.0.22NotificationclockDomainSystemSrcClockChangecurrentThis Notification indicates that a switchover(change of reference clock) occurred.
1.3.6.1.4.1.164.6.2.52.0.23NotificationclockDomainStationSrcClockChangecurrentThis Notification indicates that the domain station source clock changed.
1.3.6.1.4.1.164.6.2.52.0.24NotificationptpMasterUnavailableTodcurrentThis Notification indicates unavailable time of day (TOD).
1.3.6.1.4.1.164.6.2.52.0.25NotificationptpMasterUnavailable1ppscurrentThis Notification indicates unavailable 1pps.
1.3.6.1.4.1.164.6.2.52.0.26NotificationptpMasterSlavesLimitReachedcurrentThis Notification indicates that slaves limit was reached.
1.3.6.1.4.1.164.6.2.52.0.27NotificationptpMasterGrantedServiceAbortedcurrentThis Notification indicates that the granted service was aborted.
1.3.6.1.4.1.164.6.2.52.0.28NotificationptpMasterSlaveRequestDeniedcurrentThis Notification indicates that slave request was denied.
1.3.6.1.4.1.164.6.2.52.0.29NotificationptpRecoveredSevereTimeConditionOdeprecatedThis Notification indicates that network conditions might cause time recovery degradation. The 'O' at the end of the trap name mean 'Old'.
1.3.6.1.4.1.164.6.2.52.0.30NotificationptpRecoveredMasterSwitchoverOdeprecatedThis Notification indicates that a switchover to another PTP master occured. The 'O' at the end of the trap name mean 'Old'.
1.3.6.1.4.1.164.6.2.52.0.31NotificationptpRecoveredMasterUnicastNegFailOdeprecatedThis Notification indicates unicast negotiation failure. The 'O' at the end of the trap name mean 'Old'.
1.3.6.1.4.1.164.6.2.52.0.32NotificationptpRecoveredNoPtpMasterOdeprecatedThis Notification indicates No PTP Master. The 'O' at the end of the trap name mean 'Old'.
1.3.6.1.4.1.164.6.2.52.0.33NotificationptpRecoveredInvalidTimeAccuracyOdeprecatedThis Notification indicates Unacceptable Time Accuracy. The 'O' at the end of the trap name mean 'Old'.
1.3.6.1.4.1.164.6.2.52.0.34NotificationptpRecoveredMasterSyncFailOdeprecatedThis Notification indicates Master Sync Failure. The 'O' at the end of the trap name mean 'Old'.
1.3.6.1.4.1.164.6.2.52.0.35NotificationptpRecoveredMasterAnnounceFailOdeprecatedThis Notification indicates Master Announce Failure. The 'O' at the end of the trap name mean 'Old'.
1.3.6.1.4.1.164.6.2.52.0.36NotificationptpRecoveredMasterDelayRespFailOdeprecatedThis Notification indicates Master Delay Response Failure. The 'O' at the end of the trap name mean 'Old'.
1.3.6.1.4.1.164.6.2.52.0.37NotificationsystemSourceClockFailurecurrentThis trap indicates Source clock failure.
1.3.6.1.4.1.164.6.2.52.0.38Notificationg82751MasterTxClkClassChangecurrentThis trap indicates G.8275.1 master clock Tx class change.
1.3.6.1.4.1.164.6.2.52.0.39Notificationg82751RecoveredFreqStateChangecurrentThis trap indicates G.8275.1 recovered (slave) clock frequency state change.
1.3.6.1.4.1.164.6.2.52.0.40Notificationg82751RecoveredTimeStateChangecurrentThis trap indicates G.8275.1 recovered (slave) clock time state change.
1.3.6.1.4.1.164.6.2.52.0.41Notificationg82751RecoveredRxClkClsChangecurrentThis trap indicates G.8275.1 recovered (slave) Rx clock class change.
1.3.6.1.4.1.164.6.2.52.0.42Notificationg82751RecoveredSlavePortChangecurrentThis trap indicates G.8275.1 recovered (slave) slave port change.
1.3.6.1.4.1.164.6.2.52.0.43Notificationg82751RecoveredGMChangecurrentThis trap indicates G.8275.1 recovered (slave) grand master change.
1.3.6.1.4.1.164.6.2.52.0.44Notificationg82751RecoveredNoMastercurrentThis trap indicates there is no Master clock for G.8275.1 recovered (slave) entity.
1.3.6.1.4.1.164.6.2.52.0.45Notificationg82751RecoveredFreqOutOfSpeccurrentThis trap indicates G.8275.1 recovered (slave) entity receives clock signal with frequency accuracy out of specification.
1.3.6.1.4.1.164.6.2.52.0.46Notificationg82751RecoveredTimeOutOfSpeccurrentThis trap indicates G.8275.1 recovered (slave) entity receives clock signal with bad time accuracy.
1.3.6.1.4.1.164.6.2.52.0.47Notificationg82751RecoveredDisqualMastercurrentThis trap indicates G.8275.1 recovered (slave) entity has no qualified Master.
1.3.6.1.4.1.164.6.2.52.0.48Notificationg82751RecoveredSyncFailcurrentThis trap indicates G.8275.1 recovered (slave) entity sync rate failure.
1.3.6.1.4.1.164.6.2.52.0.49Notificationg82751RecoveredAnnounceFailcurrentThis trap indicates G.8275.1 recovered (slave) entity announce rate failure.
1.3.6.1.4.1.164.6.2.52.0.50Notificationg82751RecoveredDelayRespFailcurrentThis trap indicates G.8275.1 recovered (slave) entity delay response rate failure.
1.3.6.1.4.1.164.6.2.52.0.51NotificationptpRecoveredTimeStateChangecurrentThis Notification indicates that there was a change in the 1588 time state machine.
1.3.6.1.4.1.164.6.2.52.1TableagnClkSrcPortTablenot-accessiblecurrentPool of Ports for the Master/Fallback Clock Source and of Recovered/Distributed Clock IDs. For devices with more than one configuration: Set operation is valid…
1.3.6.1.4.1.164.6.2.52.1.1RowagnClkSrcPortEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.52.1.1.1ColumnagnClkSrcPortCnfgIdxnot-accessiblecurrentThis object indicates the Idx of the Cnfg being accessed ; Idx of 255 relates to the TmpCnfg. For product supporting a single configuration, the value will be …
1.3.6.1.4.1.164.6.2.52.1.1.2ColumnagnClkSrcPortSrcIdxnot-accessiblecurrentClock Source Index. master - refers to Master clock fallback - refers to Fallback clock recovered - refers to Recovered PTP1588 clock distributed - refers to D…
1.3.6.1.4.1.164.6.2.52.1.1.3ColumnagnClkSrcPortIdxnot-accessiblecurrentThis object indicates the running Idx of the Port/Recovered/Distributed ID that is to be used as Clock Source, for each agnClkSrcPortSrcIdx instance.
1.3.6.1.4.1.164.6.2.52.1.1.4ColumnagnClkSrcPortread-createcurrentThis object indicates the Port/Interface/Recovered ID # that is to be used as Clock Source. In case of agnClkSrcPortSrcIdx = recovered(3): - When agnClkSrcPort…
1.3.6.1.4.1.164.6.2.52.1.1.5ColumnagnClkSrcPortRowStatusread-createcurrentThis object enables Creation/ Deletion of rows in the table.
1.3.6.1.4.1.164.6.2.52.1.1.6ColumnagnClkSrcPortAdminStatusread-createcurrentThis object indicates the Recovered/Distributed Clock Administrative Status.
1.3.6.1.4.1.164.6.2.52.1.1.7ColumnagnClkSrcPortTyperead-createcurrentThis object is relevant only in case of Recovered/Distributed Clock. It indicates the Clock Type. In case of value = ieee1588v2, it represents 1588v2 clocks as…
1.3.6.1.4.1.164.6.2.52.1.1.8ColumnagnClkSrcPortQualityread-createcurrentThis object indicates the Clock Source Quality.
1.3.6.1.4.1.164.6.2.52.1.1.9ColumnagnClkSrcPortNetTyperead-createcurrentThis object is relevant only in case of Recovered Clock. It indicates the Clock Network Type, i.e. the PSN network characteristics and behavior.
1.3.6.1.4.1.164.6.2.52.1.1.10ColumnagnClkSrcPortStateread-onlycurrentThis object indicates the Frequency Clock State. freeRun(1) - Clock recovery is not locked to any clock. frequencyAcquisition(2) - Adaptive clock recovery is l…
1.3.6.1.4.1.164.6.2.52.1.1.11ColumnagnClkSrcPortSrcTyperead-createcurrentThis object indicates the Src Type of each entry in the list of source instances, when agnClkSrcPortSrcIdx=master(1)or fallback(2). According to this type, agn…
1.3.6.1.4.1.164.6.2.52.1.1.12ColumnagnClkSrcPortTimeStateread-onlycurrentThis object indicates the Time Clock State. freeRun(1) - Clock recovery is not locked to any clock. acquisition(2) - Adaptive clock recovery is learning the ti…
1.3.6.1.4.1.164.6.2.52.1.1.13ColumnagnClkSrcPortDescrread-createcurrentBy default, agent will set the value of this object as follows: If agnClkSrcPortSrcIdx value is equal to distributed (4) -> PTP (1588) master name If agnClkSrc…
1.3.6.1.4.1.164.6.2.52.1.1.14ColumnagnClkSrcPortModeread-onlycurrentThis object indicates the Clock Mode when Clock type is G.8275.1 (meaning agnClkSrcPortSrcIdx=(5) or (6), and agnClkSrcPortType=5 notApplicable(1) - means agnC…
1.3.6.1.4.1.164.6.2.52.2TableagnCurrClkTablenot-accessiblecurrentCurrent Clock Source.
1.3.6.1.4.1.164.6.2.52.2.1RowagnCurrClkEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.52.2.1.1ColumnagnCurrClkObjIdxnot-accessiblecurrentThis MIB object identifies the object for which the Clock Source is used (System, Other System, Card).
1.3.6.1.4.1.164.6.2.52.2.1.2ColumnagnCurrClkModeread-onlycurrentCurrent Clock Source Mode. master - refers Master clock fallback - refers Fallback clock internal - only when both Master and Fallback Sources failed
1.3.6.1.4.1.164.6.2.52.2.1.3ColumnagnCurrClkSrcread-onlycurrentThis object indicates the Current Clock Source.
1.3.6.1.4.1.164.6.2.52.2.1.4ColumnagnCurrClkPortread-onlycurrentThis object indicates the Port/Interface/Recovered ID that is Currently used as Clock Source. - When agnCurrClkSrc=rxClock(3), this object indicates a Port ind…
1.3.6.1.4.1.164.6.2.52.2.1.5ColumnagnCurrClkHoldoverread-onlycurrentCurrent Clock Holdover State. As a last resort, in the absence of higher quality timing: - a SONET/SDH object can enter 'holdover' state, until higher quality …
1.3.6.1.4.1.164.6.2.52.2.1.6ColumnagnCurrClkSsmBasedread-onlycurrentThis parameter indicates whether clock source is selected based on receive clock quality. Clock quality is indicated in S1 byte inside SONET/SDH overhead, (enc…
1.3.6.1.4.1.164.6.2.52.2.1.7ColumnagnCurrClkStateread-onlycurrentThis object indicates the Current Clock State. freeRun(1) - Current clock state machine is not locked and run from the internal oscillator. rapidPhaseLock(2) -…
1.3.6.1.4.1.164.6.2.52.2.1.8ColumnagnCurrClkQualificationread-onlycurrentThis object indicates the Current Clock Qualification and defines whether the PLL can locked according to the stratum definitions.
1.3.6.1.4.1.164.6.2.52.3NodeagnClockMonitoring
1.3.6.1.4.1.164.6.2.52.3.1TableagnClkCurrentTablenot-accessiblecurrentThe Clock Current table.
1.3.6.1.4.1.164.6.2.52.3.1.1RowagnClkCurrentEntrynot-accessiblecurrentAn entry in the Clock Current table.
1.3.6.1.4.1.164.6.2.52.3.1.1.1ColumnagnClkCurrentIndexnot-accessiblecurrentAn Index that is uniquely represents the Clock.
1.3.6.1.4.1.164.6.2.52.3.1.1.2ColumnagnClkCurrentRxPacketsread-onlycurrentThe counter associated with the number of Received Packets, encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.6.2.52.3.1.1.3ColumnagnClkCurrentLostPacketsread-onlycurrentThe counter associated with the number of Lost Packets, encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.6.2.52.3.1.1.4ColumnagnClkCurrentOutOfOrderPacketsread-onlycurrentThe counter associated with the number of times Out-of-Order Packets encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.6.2.52.3.1.1.5ColumnagnClkCurrentBufferUnderflowread-onlycurrentThe counter associated with the number of times Underflow event encountered by a Bridge Port in the current 15 minute interval.
1.3.6.1.4.1.164.6.2.52.3.2TableagnClkIntervalTablenot-accessiblecurrentThe Clock Interval table.
1.3.6.1.4.1.164.6.2.52.3.2.1RowagnClkIntervalEntrynot-accessiblecurrentAn entry in the Clock Interval table.
1.3.6.1.4.1.164.6.2.52.3.2.1.1ColumnagnClkIntervalIndexnot-accessiblecurrentAn Index that is uniquely represents the Clock.
1.3.6.1.4.1.164.6.2.52.3.2.1.2ColumnagnClkIntervalNumbernot-accessiblecurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.6.2.52.3.2.1.3ColumnagnClkIntervalRxPacketsread-onlycurrentThe counter associated with the number of Received Packets, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.6.2.52.3.2.1.4ColumnagnClkIntervalLostPacketsread-onlycurrentThe counter associated with the number of Lost Packets, encountered by a Bridge Port in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.6.2.52.3.2.1.5ColumnagnClkIntervalOutOfOrderPacketsread-onlycurrentThe counter associated with the number of times Out-of-Order Packets are detected, encountered by a Bridge Port in one of the previous 96, individual 15 minute…
1.3.6.1.4.1.164.6.2.52.3.2.1.6ColumnagnClkIntervalBufferUnderflowread-onlycurrentThe counter associated with the number of times Underflow event is detected, encountered by a Bridge Port in one of the previous 96, individual 15 minute, inte…
1.3.6.1.4.1.164.6.2.52.4NodeagnPtpClk
1.3.6.1.4.1.164.6.2.52.4.1TableagnPtpClkTablenot-accessiblecurrentThe PTP (Precision Time Protocol, IEEE-1588v2) Clock table. Entries are created/deleted to/from this table upon a set of agnClkSrcPortRowStatus (from agnClkSrc…
1.3.6.1.4.1.164.6.2.52.4.1.1RowagnPtpClkEntrynot-accessiblecurrentAn entry in the PTP Clock table.
1.3.6.1.4.1.164.6.2.52.4.1.1.1ColumnagnPtpClkTypenot-accessiblecurrentThis object uniquely represents the PTP Clock Type(PTP1588 or, G.8275.1, or G.8275.2, Master or Slave, same as agnClkSrcPortSrcIdx (from agnClkSrcPortTable).
1.3.6.1.4.1.164.6.2.52.4.1.1.2ColumnagnPtpClkIdnot-accessiblecurrentThis object uniquely represents the PTP Clock ID, same as agnClkSrcPortIdx (from agnClkSrcPortTable).
1.3.6.1.4.1.164.6.2.52.4.1.1.3ColumnagnPtpClkSrcPrtClkIdread-writecurrentThis object indicates the Source Port Clock ID, within the Source Port Identity.
1.3.6.1.4.1.164.6.2.52.4.1.1.4ColumnagnPtpClkSrcPrtNumberread-writecurrentThis object indicates the Source Port Number, within the Source Port Identity.
1.3.6.1.4.1.164.6.2.52.4.1.1.5ColumnagnPtpClkSyncRateread-writecurrentThis object indicates the Sync Rate of the packet, which is transmitted from the master clock towards the slave clock.
1.3.6.1.4.1.164.6.2.52.4.1.1.6ColumnagnPtpClkQualityLogVarread-writecurrentThis object indicates the stability of the master clock.
1.3.6.1.4.1.164.6.2.52.4.1.1.7ColumnagnPtpClkAddrTyperead-writecurrentThis object indicates the Type of the Address, used by this PTP clock.
1.3.6.1.4.1.164.6.2.52.4.1.1.8ColumnagnPtpClkMcastAddrread-writecurrentThis object indicates the Multicast Address, according to agnPtpClkAddrType.
1.3.6.1.4.1.164.6.2.52.4.1.1.9ColumnagnPtpClkTosread-writecurrentThis object indicates the TOS value (range is 0..255) or the DSCP value (range is 0..64) of the PTP frame. 255 = not applicable
1.3.6.1.4.1.164.6.2.52.4.1.1.10ColumnagnPtpClkPbitread-writecurrentThis object indicates the Priority bit value (range is 0..7) of the PTP frame.
1.3.6.1.4.1.164.6.2.52.4.1.1.11ColumnagnPtpClkNumOfIntervalsread-onlycurrentThe number of previous 15-minutes intervals for which data was collected.
1.3.6.1.4.1.164.6.2.52.4.1.1.12ColumnagnPtpClkCurr15TimeElapsedread-onlycurrentThis object indicates the number of seconds that have elapsed since the beginning of the current error-measurement period (range is 0..899).
1.3.6.1.4.1.164.6.2.52.4.1.1.13ColumnagnPtpClkCurr15TxSyncPacketsread-onlycurrentThe counter associated with the number of Transmitted Sync Packets, encountered by this PTP clock in the current 15 minute interval.
1.3.6.1.4.1.164.6.2.52.4.1.1.14ColumnagnPtpClkCurr15RxSyncPacketsread-onlycurrentThe counter associated with the number of Received Sync Packets, encountered by this PTP clock in the current 15 minute interval.
1.3.6.1.4.1.164.6.2.52.4.1.1.15ColumnagnPtpClkCurr15RxFollowupPacketsread-onlycurrentThe counter associated with the number of Received Followup Packets, encountered by this PTP clock in the current 15 minute interval.
1.3.6.1.4.1.164.6.2.52.4.1.1.16ColumnagnPtpClkStateread-onlycurrentThis object indicates the PTP clock state. Failuer - The clock state is - Failuer OK - The clock state is - OK Lld - Lower Layer Down
1.3.6.1.4.1.164.6.2.52.4.1.1.17ColumnagnPtpClkIndicatedQlread-onlycurrentThis object indicates the PTP clock QL that transmit to the CSM.
1.3.6.1.4.1.164.6.2.52.4.1.1.18ColumnagnPtpClkClockIdentityread-writedeprecatedThe identity of the clock.
1.3.6.1.4.1.164.6.2.52.4.1.1.19ColumnagnPtpClkRecoveryModeread-writecurrentThis object defines the revertive mode.
1.3.6.1.4.1.164.6.2.52.4.1.1.20ColumnagnPtpClkWtrread-writecurrentWait to Restore (WTR) time in sec.
1.3.6.1.4.1.164.6.2.52.4.1.1.21ColumnagnPtpClkDomainread-writecurrentFor PTP Slave - The domain number in the send header message, use to verify that the domain number in the receive message is the same, otherwise the package wi…
1.3.6.1.4.1.164.6.2.52.4.1.1.22ColumnagnPtpClkIpAddressread-writecurrentThe IP Address of the Slave, used in NE with more then one Slaves.
1.3.6.1.4.1.164.6.2.52.4.1.1.23ColumnagnPtpClkActiveMasterread-onlycurrentThis object indicates the current active master per slave(recovered).
1.3.6.1.4.1.164.6.2.52.4.1.1.24ColumnagnPtpClkRecoveryModeSelectread-writecurrentThis object enables to combine between the 1588 and the syncE clock recovery. The actual frequency used from clock selector output to 1588 does not need to be …
1.3.6.1.4.1.164.6.2.52.4.1.1.25ColumnagnPtpClkPortMaxSlavesread-writecurrentThis object sets the maximum number of registered slaves per Master.
1.3.6.1.4.1.164.6.2.52.4.1.1.26ColumnagnPtpClkPortTxClockDomainread-writecurrentThis object set the community domain.
1.3.6.1.4.1.164.6.2.52.4.1.1.27ColumnagnPtpClkMasterStatusread-onlycurrentThis object indicates the Master Status.
1.3.6.1.4.1.164.6.2.52.4.1.1.28ColumnagnPtpClkIpAddressTyperead-writecurrentThis object indicates the Type of the Address for agnPtpClkIpAddress.
1.3.6.1.4.1.164.6.2.52.4.1.1.29ColumnagnPtpClkNetMetricsClearCountersread-writecurrentSetting this object to masterToSlave(2) or slaveToMaster(3), will enforce a clear operation for agnPtpClkNetMetricsCurrentTable (Master to Slave or Slave to Ma…
1.3.6.1.4.1.164.6.2.52.4.1.1.30ColumnagnPtpClkIdentityread-onlycurrentThe identity of the clock.
1.3.6.1.4.1.164.6.2.52.4.1.1.31ColumnagnPtpClkAsymmetryCorrectionread-writedeprecatedThe object use to compensate between TX and RX packet delay.
1.3.6.1.4.1.164.6.2.52.4.1.1.32ColumnagnPtpClkJointFrequencyTimeread-writecurrentThe object set the 1PPS algorithm to: enable - recovered frequency and time disable - recovered time only.
1.3.6.1.4.1.164.6.2.52.4.1.1.33ColumnagnPtpClkProfileTyperead-writecurrentThe object set the profile type.
1.3.6.1.4.1.164.6.2.52.4.1.1.34ColumnagnPtpClkPrtPriority2read-writecurrentThis object is relevant when agnPtpClkType=g82751Master(6). It is used in the execution of the best master clock algorithm. Lower values take precedence. It pr…
1.3.6.1.4.1.164.6.2.52.4.2TableagnPtpClkMasterStreamTablenot-accessiblecurrentThe PTP Master Clock Stream table.
1.3.6.1.4.1.164.6.2.52.4.2.1RowagnPtpClkMasterStreamEntrynot-accessiblecurrentAn entry in the PTP Master Clock Stream table.
1.3.6.1.4.1.164.6.2.52.4.2.1.1ColumnagnPtpClkMasterStreamClockIdnot-accessiblecurrentThis object uniquely represents the PTP Master Clock ID, same as agnPtpClkId when agnPtpClkType = ieee1588Master(4).
1.3.6.1.4.1.164.6.2.52.4.2.1.2ColumnagnPtpClkMasterStreamIdnot-accessiblecurrentThis object uniquely represents the Stream ID of the PTP master clock.
1.3.6.1.4.1.164.6.2.52.4.2.1.3ColumnagnPtpClkMasterStreamRowStatusread-createcurrentThis object enables the user to create/delete entries (streams) in this table.
1.3.6.1.4.1.164.6.2.52.4.2.1.4ColumnagnPtpClkMasterStreamAdminStatusread-createcurrentThis object indicates the Administrative Status of the stream.
1.3.6.1.4.1.164.6.2.52.4.2.1.5ColumnagnPtpClkMasterStreamNameread-createcurrentThis object indicates the Name of the stream.
1.3.6.1.4.1.164.6.2.52.4.2.1.6ColumnagnPtpClkMasterStreamPeerIdread-createcurrentThis object indicates the Peer ID of the stream.
1.3.6.1.4.1.164.6.2.52.4.2.1.7ColumnagnPtpClkMasterStreamNumOfIntervalsread-onlycurrentThe number of previous 15-minutes intervals for which data was collected.
1.3.6.1.4.1.164.6.2.52.4.2.1.8ColumnagnPtpClkMasterStreamCurr15TimeElapsedread-onlycurrentThis object indicates the number of seconds that have elapsed since the beginning of the current error-measurement period (range is 0..899).
1.3.6.1.4.1.164.6.2.52.4.2.1.9ColumnagnPtpClkMasterStreamCurr15TxSyncPacketsread-onlycurrentThe counter associated with the number of Transmitted Sync Packets, encountered by this stream in the current 15 minute interval.
1.3.6.1.4.1.164.6.2.52.4.3TableagnPtpClkIntervalTablenot-accessiblecurrentThe PTP Clock 15 minutes Intervals table.
1.3.6.1.4.1.164.6.2.52.4.3.1RowagnPtpClkIntervalEntrynot-accessiblecurrentAn entry in the PTP Clock 15 minutes Interval table.
1.3.6.1.4.1.164.6.2.52.4.3.1.1ColumnagnPtpClkIntNumbernot-accessiblecurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.6.2.52.4.3.1.2ColumnagnPtpClkIntTxSyncPacketsread-onlycurrentThe counter associated with the number of Transmitted Sync Packets, encountered by a PTP Clock in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.6.2.52.4.3.1.3ColumnagnPtpClkIntRxSyncPacketsread-onlycurrentThe counter associated with the number of Received Sync Packets, encountered by a PTP Clock in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.6.2.52.4.3.1.4ColumnagnPtpClkIntRxFollowupPacketsread-onlycurrentThe counter associated with the number of Received Followup Packets, encountered by a PTP Clock in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.6.2.52.4.4TableagnPtpClkMasterStreamIntTablenot-accessiblecurrentThe PTP Master Clock Stream Intervals Statistics table.
1.3.6.1.4.1.164.6.2.52.4.4.1RowagnPtpClkMasterStreamIntEntrynot-accessiblecurrentAn entry in the PTP Master Clock Interval table.
1.3.6.1.4.1.164.6.2.52.4.4.1.1ColumnagnPtpClkMasterStreamIntNumbernot-accessiblecurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.6.2.52.4.4.1.2ColumnagnPtpClkMasterStreamIntTxSyncPacketsread-onlycurrentThe counter associated with the number of Transmitted Sync Packets, encountered by this stream in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.6.2.52.4.5TableagnPtpClkCounterTablenot-accessiblecurrentThe table contains countars for PTP (1588) .
1.3.6.1.4.1.164.6.2.52.4.5.1RowagnPtpClkCounterEntrynot-accessiblecurrentAn entry in the PTP Clock.
1.3.6.1.4.1.164.6.2.52.4.5.1.1ColumnagnPtpClearCountersread-createcurrentSetting this object to on, will enforce a clear statistics counters. The command will clear statistics from all agnPtpClkCounterTable. Upon completion, the val…
1.3.6.1.4.1.164.6.2.52.4.5.1.2ColumnagnPtpUnicastAnnounceReqread-onlycurrentThe number of unicast Announce Message type requests that were sent from slave to master.
1.3.6.1.4.1.164.6.2.52.4.5.1.3ColumnagnPtpUnicastAnnounceAcceptread-onlycurrentThe number of unicast Announce Message type accepts that were sent from master to slave.
1.3.6.1.4.1.164.6.2.52.4.5.1.4ColumnagnPtpUnicastAnnounceRejectread-onlycurrentThe number of unicast Announce Message type rejects that were sent from master to slave. The durationField shall be equal to zero.
1.3.6.1.4.1.164.6.2.52.4.5.1.5ColumnagnPtpUnicastAnnounceTimeOutread-onlycurrentThe number of unicast Announce Message types that were received after timeout (60 Sec) from the master.
1.3.6.1.4.1.164.6.2.52.4.5.1.6ColumnagnPtpUnicastSyncReqread-onlycurrentThe number of unicast Sync Message type requests that were sent from slave to master.
1.3.6.1.4.1.164.6.2.52.4.5.1.7ColumnagnPtpUnicastSyncAcceptread-onlycurrentThe number of unicast Sync Message type accepts that were sent from master to slave.
1.3.6.1.4.1.164.6.2.52.4.5.1.8ColumnagnPtpUnicastSyncRejectread-onlycurrentThe number of unicast Sync Message type rejects that were sent from master to slave.
1.3.6.1.4.1.164.6.2.52.4.5.1.9ColumnagnPtpUnicastSyncTimeOutAcceptread-onlycurrentThe number of unicast Sync Message types that were received after timeout (60 Sec) from the master.
1.3.6.1.4.1.164.6.2.52.4.5.1.10ColumnagnPtpNoSyncTotalElapsedTimeread-onlycurrentThe accumulated seconds of agnPtpNoUnicastSyncElapsedTime object. This counter defines the cumulated elapsed time (in seconds) that the slave did not receive S…
1.3.6.1.4.1.164.6.2.52.4.5.1.11ColumnagnPtpNoSyncElapsedTimeread-onlycurrentThe number of seconds that the slave did not receive Sync Message from the master from the last Sync Message.
1.3.6.1.4.1.164.6.2.52.4.5.1.12ColumnagnPtpNoAnnounceTotalElapsedTimeread-onlycurrentThe accumulated seconds of agnPtpNoUnicastAnnounceElapsedTime object. This counter defines the cumulated elapsed time (in seconds) that the slave did not recei…
1.3.6.1.4.1.164.6.2.52.4.5.1.13ColumnagnPtpNoAnnounceElapsedTimeread-onlycurrentThe number of seconds that the slave did not receive Announce Message from the master from the last Announce Message.
1.3.6.1.4.1.164.6.2.52.4.5.1.14ColumnagnPtpRxSyncPacketsread-onlycurrentThe number of unicast Sync Message type that were received by the slave.
1.3.6.1.4.1.164.6.2.52.4.5.1.15ColumnagnPtpRxUnicastSyncMisOrderedread-onlycurrentThe number of unicast Sync Messages that were mis-ordered. e.g. Sync Message 5 was received before Sync Message 4.
1.3.6.1.4.1.164.6.2.52.4.5.1.16ColumnagnPtpRxSyncLostread-onlycurrentThe number of lost unicast Sync Messages from master to slave.
1.3.6.1.4.1.164.6.2.52.4.5.1.17ColumnagnPtpTxPacketsread-onlycurrentThe sum of all packet transmitted by the 1588 master (to all slaves).
1.3.6.1.4.1.164.6.2.52.4.5.1.18ColumnagnPtpTxSyncPacketsread-onlycurrentThe sum of only SYNC packets transmitted by master (to all slaves).
1.3.6.1.4.1.164.6.2.52.4.5.1.19ColumnagnPtpTXFollowUpPacketsread-onlycurrentThe sum of only FOLLOW UP packets transmitted by master (to all slaves).
1.3.6.1.4.1.164.6.2.52.4.5.1.20ColumnagnPtpTXDelayResponsePacketsread-onlycurrentThe sum of only DELAY RESPONSE packets transmitted by master (to all slaves).
1.3.6.1.4.1.164.6.2.52.4.5.1.21ColumnagnPtpTXAnnouncePacketsread-onlycurrentThe sum of only ANNOUNCE packets transmitted by master (to all slaves).
1.3.6.1.4.1.164.6.2.52.4.5.1.22ColumnagnPtpTXSignalingPacketsread-onlycurrentThe sum of only FOLLOW UP packets transmitted by master (to all slaves).
1.3.6.1.4.1.164.6.2.52.4.5.1.23ColumnagnPtpRxPacketsread-onlycurrentThe sum of all classified 1588 master received packets (Delay request and signaling packets from all slaves).
1.3.6.1.4.1.164.6.2.52.4.5.1.24ColumnagnPtpRXSignalingPacketsread-onlycurrentThe sum of only Signaling packets received by master (from all slaves).
1.3.6.1.4.1.164.6.2.52.4.5.1.25ColumnagnPtpRXDelayRequestread-onlycurrentThe sum of only DELAY REQUEST packets received by master (from all slaves).
1.3.6.1.4.1.164.6.2.52.4.5.1.26ColumnagnPtpDiscardedSignalingPacketsread-onlycurrentThe Counts only the SIGNALING packets that discarded by the master (from all slaves).
1.3.6.1.4.1.164.6.2.52.4.5.1.27ColumnagnPtpRXAnnouncePacketsread-onlycurrentThe sum of only ANNOUNCE packets received by master (from all slaves).
1.3.6.1.4.1.164.6.2.52.4.6TableagnPtpMultiMasterTablenot-accessiblecurrentThe table contains configuration and status for PTP Recovered (Slave) Masters. The table contains 2 indexes, first index is indicate the Recovered (Slave) ID f…
1.3.6.1.4.1.164.6.2.52.4.6.1RowagnPtpMultiMasterEntrynot-accessiblecurrentAn entry in the Table.
1.3.6.1.4.1.164.6.2.52.4.6.1.1ColumnagnPtpMultiMasterIdnot-accessiblecurrentThis index indicate the master number.
1.3.6.1.4.1.164.6.2.52.4.6.1.2ColumnagnPtpMultiMasterRowStatusread-createcurrentThis object enables the user to create/delete entries in this table.
1.3.6.1.4.1.164.6.2.52.4.6.1.3ColumnagnPtpMultiMasterClockIdread-createcurrentThis object uniquely represents the PTP Master Clock ID Default: clock-id = 0xFFFFFFFFFFFFFFFF.
1.3.6.1.4.1.164.6.2.52.4.6.1.4ColumnagnPtpMultiMasterPortNumberread-createcurrentThis object uniquely represents the PTP Master Port Number Default: port-number = 0xFFFF.
1.3.6.1.4.1.164.6.2.52.4.6.1.5ColumnagnPtpMultiMasterNumberread-onlycurrentThis object indicates the Master Clock Identity, the value of this object is a combination of agnPtpMultiMasterClockId and agnPtpMultiMasterPortNumber
1.3.6.1.4.1.164.6.2.52.4.6.1.6ColumnagnPtpMultiMasterPriorityread-createcurrentThe priority of the master clock. This parameter is used to in case that the masters have the same QL.
1.3.6.1.4.1.164.6.2.52.4.6.1.7ColumnagnPtpMultiMasterNetTyperead-createcurrentThe Network Type indicates the PSN network characteristics and behavior.
1.3.6.1.4.1.164.6.2.52.4.6.1.8ColumnagnPtpMultiMasterPeerread-createcurrentThis object represents the Peer Index (from peerTable).
1.3.6.1.4.1.164.6.2.52.4.6.1.9ColumnagnPtpMultiMasterSyncRateread-createcurrentThe sync message rate that the slave request from the master.
1.3.6.1.4.1.164.6.2.52.4.6.1.10ColumnagnPtpMultiMasterMinExpectedSyncRateread-createcurrentThe minimum sync message rate that the slave can request from the master.
1.3.6.1.4.1.164.6.2.52.4.6.1.11ColumnagnPtpMultiMasterSyncGrantPeriodread-createcurrentThe period of time (in seconds) that the slave ask from the master to send the sync message. 0 = disable.
1.3.6.1.4.1.164.6.2.52.4.6.1.12ColumnagnPtpMultiMasterAnnounceRateread-createcurrentThe announce message rate that the slave request from the master.
1.3.6.1.4.1.164.6.2.52.4.6.1.13ColumnagnPtpMultiMasterMinExpectedAnnounceRateread-createcurrentThe minimum announce message rate that the slave can request from the master.
1.3.6.1.4.1.164.6.2.52.4.6.1.14ColumnagnPtpMultiMasterAnnounceGrantPeriodread-createcurrentThe period of time (in seconds) that the slave ask from the master to send the announce message. 0 = disable.
1.3.6.1.4.1.164.6.2.52.4.6.1.15ColumnagnPtpMultiMasterQlread-createcurrentThe actual QL of csmDomainCurrentSourceId dependent on csmDomainSynchNetType.
1.3.6.1.4.1.164.6.2.52.4.6.1.16ColumnagnPtpMultiMasterEnableread-createcurrentThis object enable/disable the Master source.
1.3.6.1.4.1.164.6.2.52.4.6.1.17ColumnagnPtpMultiMasterReceivedQlread-onlycurrentThe QL that was received from the master.
1.3.6.1.4.1.164.6.2.52.4.6.1.18ColumnagnPtpMultiMasterGrantedSyncRateread-onlycurrentThe Sync Rate that was granted from the master.
1.3.6.1.4.1.164.6.2.52.4.6.1.19ColumnagnPtpMultiMasterGrantedSyncPeriodread-onlycurrentThe Sync Period that was granted from the master.
1.3.6.1.4.1.164.6.2.52.4.6.1.20ColumnagnPtpMultiMasterGrantedAnnounceRateread-onlycurrentThe Announce Rate that was granted from the master.
1.3.6.1.4.1.164.6.2.52.4.6.1.21ColumnagnPtpMultiMasterGrantedAnnouncePeriodread-onlycurrentThe Announce Period that was granted from the master.
1.3.6.1.4.1.164.6.2.52.4.6.1.22ColumnagnPtpMultiMasterPtsfStatusread-onlycurrentThis object indicates the status of the master clock. PSTF - Packet Timing Signal Fail.
1.3.6.1.4.1.164.6.2.52.4.6.1.23ColumnagnPtpMultiMasterDelayRespondRateread-createcurrentThis object set the delay-respond message rate that the slave request from the master. The delay-respond rate mast be equal or lower that the sync rate. Defaul…
1.3.6.1.4.1.164.6.2.52.4.6.1.24ColumnagnPtpMultiMasterMinExpectedDelayRespondRateread-createcurrentThe minimum Delay Respond message rate that the slave can request from the master. The minimum-expected must be lower or equal to the request-rate. Default: 12…
1.3.6.1.4.1.164.6.2.52.4.6.1.25ColumnagnPtpMultiMasterDelayRespondGrantPeriodread-createcurrentThe period of time (in seconds) that the slave ask from the master to send the delay-respond message. Default: 300 (sec).
1.3.6.1.4.1.164.6.2.52.4.6.1.26ColumnagnPtpMultiMasterDelayRespondGrantedRateread-onlycurrentThe Sync Period that was granted from the master.
1.3.6.1.4.1.164.6.2.52.4.6.1.27ColumnagnPtpMultiMasterGrantedDelayRespPeriodread-onlycurrentThe period of time (in seconds) that the slave ask from the master to send the delay-respond message.
1.3.6.1.4.1.164.6.2.52.4.6.1.28ColumnagnPtpMultiMasterAsymmetryCorrectionread-createcurrentThe object use to compensate between TX and RX packet delay.
1.3.6.1.4.1.164.6.2.52.4.7TableagnPtpMultiMasterCounterTablenot-accessiblecurrentThe table contains countars for PTP (1588) .
1.3.6.1.4.1.164.6.2.52.4.7.1RowagnPtpMultiMasterCounterEntrynot-accessiblecurrentAn entry in the PTP Clock.
1.3.6.1.4.1.164.6.2.52.4.7.1.1ColumnagnPtpMultiMasterClearCountersread-createcurrentSetting this object to on, will enforce a clear statistics Counters.Upon completion, the value will automatically chagne to off(2). Default=off(2).
1.3.6.1.4.1.164.6.2.52.4.7.1.2ColumnagnPtpMultiMasterUnicastAnnounceReqread-onlycurrentThe number of unicast Announce Message type requests that were sent from slave to master.
1.3.6.1.4.1.164.6.2.52.4.7.1.3ColumnagnPtpMultiMasterUnicastAnnounceAcceptread-onlycurrentThe number of unicast Announce Message type accepts that were sent from master to slave.
1.3.6.1.4.1.164.6.2.52.4.7.1.4ColumnagnPtpMultiMasterUnicastAnnounceRejectread-onlycurrentThe number of unicast Announce Message type rejects that were sent from master to slave. The durationField shall be equal to zero.
1.3.6.1.4.1.164.6.2.52.4.7.1.5ColumnagnPtpMultiMasterUnicastAnnounceTimeOutread-onlycurrentThe number of unicast Announce Message types that were received after timeout (60 Sec) from the master.
1.3.6.1.4.1.164.6.2.52.4.7.1.6ColumnagnPtpMultiMasterUnicastSyncReqread-onlycurrentThe number of unicast Sync Message type requests that were sent from slave to master.
1.3.6.1.4.1.164.6.2.52.4.7.1.7ColumnagnPtpMultiMasterUnicastSyncAcceptread-onlycurrentThe number of unicast Sync Message type accepts that were sent from master to slave.
1.3.6.1.4.1.164.6.2.52.4.7.1.8ColumnagnPtpMultiMasterUnicastSyncRejectread-onlycurrentThe number of unicast Sync Message type rejects that were sent from master to slave.
1.3.6.1.4.1.164.6.2.52.4.7.1.9ColumnagnPtpMultiMasterUnicastSyncTimeOutAcceptread-onlycurrentThe number of unicast Sync Message types that were received after timeout (60 Sec) from the master.
1.3.6.1.4.1.164.6.2.52.4.7.1.10ColumnagnPtpMultiMasterNoSyncTotalElapsedTimeread-onlycurrentThe accumulated seconds of agnPtpMultiMasterNoUnicastSyncElapsedTime object. This counter defines the cumulated elapsed time (in seconds) that the slave did no…
1.3.6.1.4.1.164.6.2.52.4.7.1.11ColumnagnPtpMultiMasterNoSyncElapsedTimeread-onlycurrentThe number of seconds that the slave did not receive Sync Message from the master from the last Sync Message.
1.3.6.1.4.1.164.6.2.52.4.7.1.12ColumnagnPtpMultiMasterNoAnnounceTotalElapsedTimeread-onlycurrentThe accumulated seconds of agnPtpMultiMasterNoAnnounceElapsedTime object. This counter defines the cumulated elapsed time (in seconds) that the slave did not r…
1.3.6.1.4.1.164.6.2.52.4.7.1.13ColumnagnPtpMultiMasterNoAnnounceElapsedTimeread-onlycurrentThe number of seconds that the slave did not receive Announce Message from the master from the last Announce Message.
1.3.6.1.4.1.164.6.2.52.4.7.1.14ColumnagnPtpMultiMasterRxSyncPacketsread-onlycurrentThe number of unicast Sync Message type that were received by the slave.
1.3.6.1.4.1.164.6.2.52.4.7.1.15ColumnagnPtpMultiMasterRxUnicastSyncMisOrderedread-onlycurrentThe number of unicast Sync Messages that were mis-ordered. e.g. Sync Message 5 was received before Sync Message 4.
1.3.6.1.4.1.164.6.2.52.4.7.1.16ColumnagnPtpMultiMasterRxSyncLostread-onlycurrentThe number of lost unicast Sync Messages from master to slave.
1.3.6.1.4.1.164.6.2.52.4.7.1.17ColumnagnPtpMultiMasterClearMeasuredCountersread-createcurrentSetting this object to on, will enforce a clear Sync statistics Counters. Upon completion, the value will automatically chagne to off(2). Default=off(2).
1.3.6.1.4.1.164.6.2.52.4.7.1.18ColumnagnPtpMultiMasterMeasuredSyncRateread-onlycurrentThe actual sync rate message that receive from the 1588 master.
1.3.6.1.4.1.164.6.2.52.4.7.1.19ColumnagnPtpMultiMasterMeasuredMaxSyncRateread-onlycurrentThe highest value that was measured in agnPtpMultiMasterMeasuredSyncRate.
1.3.6.1.4.1.164.6.2.52.4.7.1.20ColumnagnPtpMultiMasterMeasuredMinSyncRateread-onlycurrentThe lowest value that was measured in agnPtpMultiMasterMeasuredSyncRate.
1.3.6.1.4.1.164.6.2.52.4.7.1.21ColumnagnPtpMultiMasterUnicastDelayRespondReqread-onlycurrentThe number of unicast Delay Respond Message type requests that were sent from slave to master.
1.3.6.1.4.1.164.6.2.52.4.7.1.22ColumnagnPtpMultiMasterUnicastDelayRespondAcceptread-onlycurrentThe number of unicast Delay Respond Message type accepts, that were sent from master to slave.
1.3.6.1.4.1.164.6.2.52.4.7.1.23ColumnagnPtpMultiMasterUnicastDelayRespondRejectread-onlycurrentThe number of unicast Delay Respond Message type rejects that were sent from master to slave. The duration Field shall be equal to zero.
1.3.6.1.4.1.164.6.2.52.4.7.1.24ColumnagnPtpMultiMasterUnicastDelayRespondTimeOutread-onlycurrentThe number of unicast Delay Respond Message types that were received after timeout (60 Sec) from the master.
1.3.6.1.4.1.164.6.2.52.4.7.1.25ColumnagnPtpMultiMasterNoDelayRespondTotalElapsedTimeread-onlycurrentThe accumulated seconds of agnPtpMultiMasterNoDelayRespondElapsedTime object. This counter defines the cumulated elapsed time (in seconds) that the slave did n…
1.3.6.1.4.1.164.6.2.52.4.7.1.26ColumnagnPtpMultiMasterNoDelayRespondElapsedTimeread-onlycurrentThe number of seconds that the slave did not receive Delay Respond Message from the master from the last Delay Respond Message.
1.3.6.1.4.1.164.6.2.52.4.7.1.27ColumnagnPtpMultiMasterRxDelayRespondPacketsread-onlycurrentThe number of unicast Delay Respond Message type that were received by the slave.
1.3.6.1.4.1.164.6.2.52.4.7.1.28ColumnagnPtpMultiMasterEstimatedFreqErrread-onlycurrentThe number of unicast Delay Respond Message type that were received by the slave.
1.3.6.1.4.1.164.6.2.52.4.7.1.29ColumnagnPtpMultiMasterEstimatedTimeErrread-onlycurrentThe number of unicast Delay Respond Message type that were received by the slave.
1.3.6.1.4.1.164.6.2.52.4.7.1.30ColumnagnPtpMultiMasterMeasuredDelayRespondRateread-onlycurrentThe actual Delay Respond rate message that receive from the 1588 master.
1.3.6.1.4.1.164.6.2.52.4.7.1.31ColumnagnPtpMultiMasterMeasuredMaxDelayRespondRateread-onlycurrentThe highest value that was measured in agnPtpMultiMasterMeasuredDelayRespondRate.
1.3.6.1.4.1.164.6.2.52.4.7.1.32ColumnagnPtpMultiMasterMeasuredMinDelayRespondRateread-onlycurrentThe lowest value that was measured in agnPtpMultiMasterMeasuredDelayRespondRate.
1.3.6.1.4.1.164.6.2.52.4.7.1.33ColumnagnPtpMultiMasterDescrread-createcurrent.
1.3.6.1.4.1.164.6.2.52.4.7.1.34ColumnagnPtpMultiMasterTxDelayRequestPacketsread-onlycurrentThe number of unicast Delay Request Message type that were sent by the slave.
1.3.6.1.4.1.164.6.2.52.4.8TableagnPtpClkSlaveTablenot-accessiblecurrentThe table contains statuses and countars of the 1588 slave that registered on a 1588 master.
1.3.6.1.4.1.164.6.2.52.4.8.1RowagnPtpClkSlaveEntrynot-accessiblecurrentAn entry in the PTP Clock.
1.3.6.1.4.1.164.6.2.52.4.8.1.1ColumnagnPtpClkSlaveIpAddressTyperead-onlycurrentType of the IP Address designated by deviceAccessIpAddress
1.3.6.1.4.1.164.6.2.52.4.8.1.2ColumnagnPtpClkSlaveIpAddressnot-accessiblecurrentThe IP number of slave.
1.3.6.1.4.1.164.6.2.52.4.8.1.3ColumnagnPtpClkSlaveNumberClearCountersread-createcurrentThis object reset all the Master and the Slave counters. Setting this object to on, will enforce a clear statistics Counters.Upon completion, the value will au…
1.3.6.1.4.1.164.6.2.52.4.8.1.4ColumnagnPtpClkSlaveTxSyncPacketsread-onlycurrentThe number of Sync packets transmitted by master.
1.3.6.1.4.1.164.6.2.52.4.8.1.5ColumnagnPtpClkSlaveTXFollowUpPacketsread-onlycurrentThe number of delay response packets transmitted by master.
1.3.6.1.4.1.164.6.2.52.4.8.1.6ColumnagnPtpClkSlaveTXDelayResponsePacketsread-onlycurrentThe number of delay response packets transmitted by master .
1.3.6.1.4.1.164.6.2.52.4.8.1.7ColumnagnPtpClkSlaveTXAnnouncePacketsread-onlycurrentThe number of announce packets transmitted by master.
1.3.6.1.4.1.164.6.2.52.4.8.1.8ColumnagnPtpClkSlaveTXSignalingPacketsread-onlycurrentThe number of signaling packets transmitted by master .
1.3.6.1.4.1.164.6.2.52.4.8.1.9ColumnagnPtpClkSlaveRXSignalingPacketsread-onlycurrentThe number of signaling packets received by master .
1.3.6.1.4.1.164.6.2.52.4.8.1.10ColumnagnPtpClkSlaveRXDelayRequestread-onlycurrentThe number of delay request packets received by master .
1.3.6.1.4.1.164.6.2.52.4.8.1.11ColumnagnPtpClkSlaveDiscardedSignalingPacketsread-onlycurrentThe number of signaling packets that discarded by the SW.
1.3.6.1.4.1.164.6.2.52.4.8.1.12ColumnagnPtpClkSlaveValidityread-onlycurrentThis object indicates the validity of the slave.
1.3.6.1.4.1.164.6.2.52.4.8.1.13ColumnagnPtpClkSlaveOperationalModeread-onlycurrentIn this SYNC mode, the delay response and announce messages will be transmitted by the master to the salve.
1.3.6.1.4.1.164.6.2.52.4.8.1.14ColumnagnPtpClkSlaveClockIdentityread-onlycurrentThe 1588 PTP slave unique identifier.
1.3.6.1.4.1.164.6.2.52.4.8.1.15ColumnagnPtpClkSlaveAnnounceRateread-onlycurrentThe announce Interval is the rate (packets per second) of the Announce packets transmitted by the master to the slave
1.3.6.1.4.1.164.6.2.52.4.8.1.16ColumnagnPtpClkSlaveAnnouncePeriodread-onlycurrentThe number of seconds for which the Announce messages shall be transmitted
1.3.6.1.4.1.164.6.2.52.4.8.1.17ColumnagnPtpClkSlaveDelayRespondRateread-onlycurrentThe Delay Response Interval is the rate (packets per second) of the Delay Response packets transmitted by the master to the slave.
1.3.6.1.4.1.164.6.2.52.4.8.1.18ColumnagnPtpClkSlaveDelayRespondPeriodread-onlycurrentThe number of seconds for the Delay Response messages shall be transmitted
1.3.6.1.4.1.164.6.2.52.4.9TableagnPtpClkNetMetricsCurrentTablenot-accessiblecurrentThe Clock network metrics current statistics table.
1.3.6.1.4.1.164.6.2.52.4.9.1RowagnPtpClkNetMetricsCurrentEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.52.4.9.1.1ColumnagnPtpClkNetMetricsCurrentSlaveIndexnot-accessiblecurrentAn Index that is uniquely represents the Clock entity. The index shall be equal to agnPtpClkId.
1.3.6.1.4.1.164.6.2.52.4.9.1.2ColumnagnPtpClkNetMetricsCurrentDirectionnot-accessiblecurrentThis object indicates the direction of the statistics.
1.3.6.1.4.1.164.6.2.52.4.9.1.3ColumnagnPtpClkNetMetricsCurrentIdnot-accessiblecurrentThis object indicates the metrics ID.
1.3.6.1.4.1.164.6.2.52.4.9.1.4ColumnagnPtpClkNetMetricsCurrentTauread-onlycurrentThis object indicates the measuring window time of the statistics, ( The time is sec ).
1.3.6.1.4.1.164.6.2.52.4.9.1.5ColumnagnPtpClkNetMetricsCurrentTdevread-onlycurrentA Time Deviation metric based on Allan Variance. Measures standard deviation of a packet network frequency instability (caused by PDV) over a specific observat…
1.3.6.1.4.1.164.6.2.52.4.9.1.6ColumnagnPtpClkNetMetricsCurrentMinTdevread-onlycurrentA minimum Time Deviation metric based on Allan variance. Measures frequency instability standard deviation of the early arriving packets only (with minimum net…
1.3.6.1.4.1.164.6.2.52.4.9.1.7ColumnagnPtpClkNetMetricsCurrentElapsedTimeread-onlycurrentThe number of seconds that the statistics were accumulated from the last statistic reset.
1.3.6.1.4.1.164.6.2.52.4.10TableagnPtpClkNetMetricsIntervalTablenot-accessiblecurrentThe Clock Net Metrics Interval table The duration of each interval is 1 hour.
1.3.6.1.4.1.164.6.2.52.4.10.1RowagnPtpClkNetMetricsIntervalEntrynot-accessiblecurrentAn entry in the Clock Interval statistic table.
1.3.6.1.4.1.164.6.2.52.4.10.1.1ColumnagnPtpClkNetMetricsIntervalSlaveIndexnot-accessiblecurrentAn Index that is uniquely represents the Clock entity. The index shall be equal to agnPtpClkId.
1.3.6.1.4.1.164.6.2.52.4.10.1.2ColumnagnPtpClkNetMetricsIntervalDirectionnot-accessiblecurrentThis object indicates the direction of the statistics
1.3.6.1.4.1.164.6.2.52.4.10.1.3ColumnagnPtpClkNetMetricsIntervalIdnot-accessiblecurrentThis object indicates the metrics ID.
1.3.6.1.4.1.164.6.2.52.4.10.1.4ColumnagnPtpClkNetMetricsIntervalNumbernot-accessiblecurrentThe Interval Number. This number is between 1 and x, where 1 is the most recently completed interval and x is the least recently completed interval.
1.3.6.1.4.1.164.6.2.52.4.10.1.5ColumnagnPtpClkNetMetricsIntervalTauread-onlycurrentThis object indicates the measuring window time of the statistics ( The time is sec ).
1.3.6.1.4.1.164.6.2.52.4.10.1.6ColumnagnPtpClkNetMetricsIntervalTdevread-onlycurrentA Time Deviation metric based on Allan Variance. Measures standard deviation of a packet network frequency instability (caused by PDV) over a specific observat…
1.3.6.1.4.1.164.6.2.52.4.10.1.7ColumnagnPtpClkNetMetricsIntervalMinTdevread-onlycurrentA minimum Time Deviation metric based on Allan variance. Measures frequency instability standard deviation of the early arriving packets only (with minimum net…
1.3.6.1.4.1.164.6.2.52.4.10.1.8ColumnagnPtpClkNetMetricsIntervalElapsedTimeread-onlycurrentThe number of seconds that have elapsed since the beginning of the interval.
1.3.6.1.4.1.164.6.2.52.4.11TableagnPtpClkNetMetricsIntervalMasterTablenot-accessiblecurrentThis table includes the master ID that was active during the interval.
1.3.6.1.4.1.164.6.2.52.4.11.1RowagnPtpClkNetMetricsIntervalMasterEntrynot-accessiblecurrentAn entry in the Clock Interval table.
1.3.6.1.4.1.164.6.2.52.4.11.1.1ColumnagnPtpClkNetMetricsIntervalMasterIdread-onlycurrentThe Master ID that was active during the interval.
1.3.6.1.4.1.164.6.2.52.4.11.1.2ColumnagnPtpClkNetMetricsIntervalSamplingTimeread-onlycurrentThe date and time of the sampling that occurs during the interval.
1.3.6.1.4.1.164.6.2.52.4.12TableagnPtpClkPrtTablenot-accessiblecurrentG.8275.1 Port Table.
1.3.6.1.4.1.164.6.2.52.4.12.1RowagnPtpClkPrtEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.52.4.12.1.1ColumnagnPtpClkPrtIdxnot-accessiblecurrentThis object indicates the Idx of the ptp-port.
1.3.6.1.4.1.164.6.2.52.4.12.1.2ColumnagnPtpClkPrtSviIdread-createcurrentThis object indicates the Svi Id to which the ptp-port is associated to.
1.3.6.1.4.1.164.6.2.52.4.12.1.3ColumnagnPtpClkPrtLowerLayerIdread-createcurrentThis object indicates the IfIndex of the entity to which the SVI associated to.
1.3.6.1.4.1.164.6.2.52.4.12.1.4ColumnagnPtpClkPrtLocalPriorityread-createcurrentThis object indicates local priority of the ptp-port default value is 128.
1.3.6.1.4.1.164.6.2.52.4.12.1.5ColumnagnPtpClkPrtAsymmetryread-createcurrentThis object indicates clock signal Assymetry, in nano-seconds default value is 0.
1.3.6.1.4.1.164.6.2.52.4.12.1.6ColumnagnPtpClkPrtProvisionedStateread-createcurrentThis object indicates the ptp-port configured state.
1.3.6.1.4.1.164.6.2.52.4.12.1.7ColumnagnPtpClkPrtActualStateread-onlycurrentThis object indicates the ptp-port actual state.
1.3.6.1.4.1.164.6.2.52.4.12.1.8ColumnagnPtpClkPrtMacAddressread-createcurrentThis object indicates the ptp-port MAC Address.
1.3.6.1.4.1.164.6.2.52.4.12.1.9ColumnagnPtpClkPrtClkClassread-createcurrentThis object indicates Clock Class. In case the ptp-port actual state is 'Master'- this object will indicate transmitted Clock Class. In case the ptp-port actua…
1.3.6.1.4.1.164.6.2.52.4.12.1.10ColumnagnPtpClkPrtClkAccuracyread-createcurrentThis object indicates Clock Accuarcy. In case the ptp-port actual state is 'Master'- this object will indicate transmitted Clock Accuracy. In case the ptp-port…
1.3.6.1.4.1.164.6.2.52.4.12.1.11ColumnagnPtpClkPrtClkOffsetScaledLogVarread-createcurrentThis object indicates Clock Offset Scaled Variance. In case the ptp-port actual state is 'Master'- this object will indicate transmitted Clock offset scaled va…
1.3.6.1.4.1.164.6.2.52.4.12.1.12ColumnagnPtpClkPrtClkIdentityread-createcurrentThis object indicates Clock Identity. In case the ptp-port actual state is 'Master'- this object will indicate transmitted Clock Identity. In case the ptp-port…
1.3.6.1.4.1.164.6.2.52.4.12.1.13ColumnagnPtpClkPrtAnnounceRateread-createcurrentThis object indicates the Announce Rate of the packets, which are transmitted or received through this port.
1.3.6.1.4.1.164.6.2.52.4.12.1.14ColumnagnPtpClkPrtSyncRateread-createcurrentThis object indicates the Sync Rate of the packets, which are transmitted or received through this port.
1.3.6.1.4.1.164.6.2.52.4.12.1.15ColumnagnPtpClkPrtDelayRateread-createcurrentThis object indicates the Delay Rate of the packets, which are transmitted or received through this port.
1.3.6.1.4.1.164.6.2.52.4.12.1.16ColumnagnPtpClkPrtRowStatusread-createcurrentThis object enables creation and deletion of entries in the agnPtpClkPrtTable.
1.3.6.1.4.1.164.6.2.52.4.12.1.17ColumnagnPtpClkPrtRxSourcePortIdread-onlycurrentThis object is relevant for ptp-Port associated to Slave entity only. This object indicates received source port identity, as it is received in 1588 messages.
1.3.6.1.4.1.164.6.2.52.4.12.1.18ColumnagnPtpClkPrtGrandMasterIdentityread-onlycurrentThis object is relevant for ptp-Port associated to Slave entity only. This object indicates received source port identity, as it is received in 1588 announce m…
1.3.6.1.4.1.164.6.2.52.4.12.1.19ColumnagnPtpClkPrtFrequencyTraceableFlagread-createcurrentThe frequencyTraceable flag may be traceable or notTraceable, depending on the availability of a PRC-tracable physical layer frequency input signal.
1.3.6.1.4.1.164.6.2.52.4.13TableagnPtpClkPrtCounterTablenot-accessiblecurrentThe table contains counters for Hop by Hop Cloclc Ports (G.8275.1) .
1.3.6.1.4.1.164.6.2.52.4.13.1RowagnPtpClkPrtCounterEntrynot-accessiblecurrentAn entry in the Table.
1.3.6.1.4.1.164.6.2.52.4.13.1.1ColumnagnPtpClkPrtCounterIdxnot-accessiblecurrentThis object indicates the Idx of the ptp-port.
1.3.6.1.4.1.164.6.2.52.4.13.1.2ColumnagnPtpClkPrtCounterClearCountersread-createcurrentSetting this object to on, will enforce a clear statistics counters. The command will clear statistics from all agnPtpClkPrtCounterTable. Upon completion, the …
1.3.6.1.4.1.164.6.2.52.4.13.1.3ColumnagnPtpClkPrtCounterTxAnnouncePacketsread-onlycurrentThe sum of Announce packets transmitted by the port.
1.3.6.1.4.1.164.6.2.52.4.13.1.4ColumnagnPtpClkPrtCounterRxAnnouncePacketsread-onlycurrentThe sum of Announce packets received by the port.
1.3.6.1.4.1.164.6.2.52.4.13.1.5ColumnagnPtpClkPrtCounterTxSyncPacketsread-onlycurrentThe sum of Sync packets transmitted by the port.
1.3.6.1.4.1.164.6.2.52.4.13.1.6ColumnagnPtpClkPrtCounterRxSyncPacketsread-onlycurrentThe sum of Sync packets received by the port.
1.3.6.1.4.1.164.6.2.52.4.13.1.7ColumnagnPtpClkPrtCounterTxDelayReqPacketsread-onlycurrentThe sum of Delay Request packets transmitted by the port.
1.3.6.1.4.1.164.6.2.52.4.13.1.8ColumnagnPtpClkPrtCounterTxDelayResPacketsread-onlycurrentThe sum of Delay Response packets transmitted by the port.
1.3.6.1.4.1.164.6.2.52.4.13.1.9ColumnagnPtpClkPrtCounterRxDelayReqPacketsread-onlycurrentThe sum of Delay Request packets received by the port.
1.3.6.1.4.1.164.6.2.52.4.13.1.10ColumnagnPtpClkPrtCounterRxDelayResPacketsread-onlycurrentThe sum of Delay Response packets received by the port.
1.3.6.1.4.1.164.6.2.52.5Nodecsm
1.3.6.1.4.1.164.6.2.52.5.1TablecsmDomainTablenot-accessiblecurrentClock Selection Module (CSM) Table.
1.3.6.1.4.1.164.6.2.52.5.1.1RowcsmDomainEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.52.5.1.1.1ColumncsmDomainIdxnot-accessiblecurrentThis is the unique Clock Selection Module Domain index.
1.3.6.1.4.1.164.6.2.52.5.1.1.2ColumncsmDomainRowStatusread-createcurrentThis object enables creation and deletion of entries in the csmDomainTable.
1.3.6.1.4.1.164.6.2.52.5.1.1.3ColumncsmDomainModeread-createcurrentThis object determines Clock Selection operational mode. auto = CSM automatically selects the Clock Source. In this mode, CSM can be configured to work in the …
1.3.6.1.4.1.164.6.2.52.5.1.1.4ColumncsmDomainQlModeread-createcurrentThis object determines the QL (quality) mode. enable = clock selection is done according to quality of the clock sources. For clock sources having same quality…
1.3.6.1.4.1.164.6.2.52.5.1.1.5ColumncsmDomainSynchNetTyperead-createcurrentThis object determines the network synchronization type applicable to geographic area. Each type has possible quality levels (csmDomainCurrentSourceQl). Upon c…
1.3.6.1.4.1.164.6.2.52.5.1.1.6ColumncsmDomainQlMinimumread-createcurrentThis object determines the minimum Quality Level(QL) of the clock which is sent out via station clock connector. QL value is Set according to the defined type …
1.3.6.1.4.1.164.6.2.52.5.1.1.7ColumncsmDomainExternalCmdread-createcurrentAn external command . forced - It will override the currently clock source. csmDomainExtCmdParam determines the desired clock source. This clock source will be…
1.3.6.1.4.1.164.6.2.52.5.1.1.8ColumncsmDomainExtCmdParamread-createcurrentThis object determines the required clock source number when csmDomainExternalCmd is set to forced(3) or manual(4). When 'forced' value is Set, CSM will switch…
1.3.6.1.4.1.164.6.2.52.5.1.1.9ColumncsmDomainClearStatCountersread-createcurrentSetting this object to on, will enforce a clear operation of CSM statistics Counters. The command will clear statistics from all sources in csmSourceTable. Upo…
1.3.6.1.4.1.164.6.2.52.5.1.1.10ColumncsmDomainSysSourceIdread-onlycurrentSystem Clock Source ID. 0 = Source Clock is internal. Max value is Max number of existing Clock sources. For standard projects Max number of clock sources is 8…
1.3.6.1.4.1.164.6.2.52.5.1.1.11ColumncsmDomainCurrentSourceQlread-onlycurrentThe actual QL of csmDomainCurrentSourceId dependent on csmDomainSynchNetType.
1.3.6.1.4.1.164.6.2.52.5.1.1.12ColumncsmDomainStationOutSourceIdread-onlycurrentThe Clock Source ID, which is sent out via station clock connector. When equals 0, clock Source is internal. Applicable only when device contains station clock…
1.3.6.1.4.1.164.6.2.52.5.1.1.13ColumncsmDomainSysSourceStateread-onlycurrentThe system selected clock source state. freeRun - internal clock is in use. holdover - incoming reference is in signal fail state (SSF = true). locked - incomi…
1.3.6.1.4.1.164.6.2.52.5.1.1.14ColumncsmDomainStationOutSourceStateread-onlycurrentThe state of the Clock Source, which is sent out via station clock connector. locked - incoming reference to station clock is not in the signal fail state (SSF…
1.3.6.1.4.1.164.6.2.52.5.1.1.15ColumncsmDomainForceSwitchStateread-onlycurrentThe state of the Force Switch. active - The Force Switch action is active inActive - The Force Switch action is not active.
1.3.6.1.4.1.164.6.2.52.5.1.1.16ColumncsmDomainManualSwitchStateread-onlycurrentThe state of the Manual Switch. active - The Manual Switch action is active inActive - The Manual Switch action is not active.
1.3.6.1.4.1.164.6.2.52.5.1.1.17ColumncsmDomainForceT4AsT0read-createcurrentEnsure that t0 and t4 are derived from the same source (in case t4 is not driven from external source while t0 is).
1.3.6.1.4.1.164.6.2.52.5.1.1.18ColumncsmDomainMaxFrequencyDeviationread-createcurrentThis is the frequency deviation threshold. If the actual input clock frequency deviation exceeds this threshold, the given synchronization source is disqualifi…
1.3.6.1.4.1.164.6.2.52.5.1.1.19ColumncsmDomainDescrread-createcurrentThe description of the domain
1.3.6.1.4.1.164.6.2.52.5.1.1.20ColumncsmDomainLastSystemSrcClkSwitchReasonread-onlycurrentReason of the last system source clock switch. (1) Other (2) Manual Switch Command (3) Force Switch Command (4) Invalid Clock (5) Better Clock Availability (25…
1.3.6.1.4.1.164.6.2.52.5.1.1.21ColumncsmDomainLastStationSrcClkSwitchReasonread-onlycurrentReason of the last station source clock switch. (1) Other (2) Manual Switch Command (3) Force Switch Command (4) Invalid Clock (5) Better Clock Availability (2…
1.3.6.1.4.1.164.6.2.52.5.2TablecsmSourceTablenot-accessiblecurrentCSM Clock Sources Table.
1.3.6.1.4.1.164.6.2.52.5.2.1RowcsmSourceEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.6.2.52.5.2.1.1ColumncsmSourceDomainIdxnot-accessiblecurrentThis is the unique CSM Domain index that the current clock source is referenced to.
1.3.6.1.4.1.164.6.2.52.5.2.1.2ColumncsmSourceIdxnot-accessiblecurrentCSM Source running index. For standard projects Max number of clock sources is 8, and for non standard projects it is project dependent.
1.3.6.1.4.1.164.6.2.52.5.2.1.3ColumncsmSourceRowStatusread-createcurrentThis object enables creation and deletion of entries in the csmSourceTable. It will not be possible to add entries with csmSourceDomainIdx that doesn't exist i…
1.3.6.1.4.1.164.6.2.52.5.2.1.4ColumncsmSourceTyperead-createcurrentSource type.
1.3.6.1.4.1.164.6.2.52.5.2.1.5ColumncsmSourceIDread-createcurrentID of the clock source. ID depends on type as follows: rxPort - ifIndex of the interface configured for the csmSourceIdx. station - Station ID. recovered - Rec…
1.3.6.1.4.1.164.6.2.52.5.2.1.6ColumncsmSourceQLread-createcurrentThe configured quality level of csmSourceIdx. Default= ssmBased (type1SsmBased(6)/type2SsmBased(30)/type3SsmBased(43)) according to the type (csmDomainSynchNet…
1.3.6.1.4.1.164.6.2.52.5.2.1.7ColumncsmSourcePriorityread-createcurrentThe configured priority. Priority will be used for source selection when the Quality Levels of the clock sources cannot be used (for example when Quality Level…
1.3.6.1.4.1.164.6.2.52.5.2.1.8ColumncsmSourceHoldoffTimerread-createcurrentHoldoff Timer in msec. When Holdoff Timer>0, and the current clock source fails (SSF), timer is started and doesn't trigger the CSM immediately to switch to an…
1.3.6.1.4.1.164.6.2.52.5.2.1.9ColumncsmSourceWtrTimerread-createcurrentWait to Restore (WTR) time in msec. After failed clock source recovers, in order to prevent frequent clock source switchings of the CSM due to intermittent def…
1.3.6.1.4.1.164.6.2.52.5.2.1.10ColumncsmSourceWtrClearread-createcurrentSetting this object to on, will clear WTR, causing immediate return to recovered source. Upon completion, the value will automatically change to off(2). Defaul…
1.3.6.1.4.1.164.6.2.52.5.2.1.11ColumncsmSourceStatusread-onlycurrentClock Source Status. physicalFail(2)- Physical interface failure. monitoringFail(3)- Clock Selection HW failure (SSF = true). esmcFail(4)- Fail report received…
1.3.6.1.4.1.164.6.2.52.5.2.1.12ColumncsmSourceTxQLread-onlycurrentThe reported Quality Level(QL)from Clock Selection Module(CSM) to Clock Source.
1.3.6.1.4.1.164.6.2.52.5.2.1.13ColumncsmSourceRxQLread-onlycurrentThe reported Quality Level(QL)Clock Source to Clock Selection Module.
1.3.6.1.4.1.164.6.2.52.5.2.1.14ColumncsmSourceEsmcStateread-onlycurrentESMC Protocol state. unlock - Messages are not received as expected. lock- OK. Applicable only for Ethernet interfaces.
1.3.6.1.4.1.164.6.2.52.5.2.1.15ColumncsmSourceEsmcTxInfoFramesread-onlycurrentNumber of informational ESMC messages sent from Clock Selection Module(CSM) to Clock Source. Applicable only for Ethernet interfaces.
1.3.6.1.4.1.164.6.2.52.5.2.1.16ColumncsmSourceEsmcRxInfoFramesread-onlycurrentNumber of informational ESMC messages received by Clock Selection Module(CSM) . Applicable only for Ethernet interfaces.
1.3.6.1.4.1.164.6.2.52.5.2.1.17ColumncsmSourceEsmcFailuresread-onlycurrentNumber of times that ESMC messages were not received as expected. Applicable only for Ethernet interfaces.
1.3.6.1.4.1.164.6.2.52.5.2.1.18ColumncsmkSourceEsmcTxEventFramesread-onlycurrentNumber of ESMC messages that report status change of the clock source (csmSourceStatus) that were sent from Clock Selection Module(CSM) to Clock Source. Applic…
1.3.6.1.4.1.164.6.2.52.5.2.1.19ColumncsmSourceEsmcRxEventFramesread-onlycurrentNumber of ESMC messages that report status change of the clock source (csmSourceStatus) that were received by Clock Selection Module(CSM). Applicable only for …
1.3.6.1.4.1.164.6.2.52.5.2.1.20ColumncsmSourceWTRStateread-onlycurrentWait to restore state. Use the number (2) to indicate 'running' state, Use the number (3) to indicate 'inactive' state, All other numbers can be use to indicat…
1.3.6.1.4.1.164.6.2.52.6NodeagnClockPorts
1.3.6.1.4.1.164.6.2.52.6.1ScalaragnClkstationClkCableModeread-writecurrentThis configuration parameter indicates whether both Station clocks are designated to get their clocks from the same source (Y-Cable) or each one gets its clock…
1.3.6.1.4.1.164.6.2.52.6.2ScalaragnClkTodBaudrateread-writecurrentThis object TBD . Default: 4800pbs
Type Definitions
NameSyntaxStatusDescription
AnnounceRateINTEGER { r125msec (1), r250msec (2), r500msec (3), r1sec (4), r2sec (5), r4sec (6), r8sec (7), r16sec (8) }currentThis TEXTUAL CONVENTION defines the announce packet rate.
ClockQlListINTEGER { type1Prc (1), type1SsuA (2), type1SsuB (3), type1Sec (4), type1Dnu (5), type1SsmBased (6), type2Prs (21), type2Stu (22), type2St2 (23), type2Tnc (24), type2St3e (25), type2St3 (26), type2Smc (27), type2St4 (28), type2Dus (29), type2SsmBased (30), type2Prov (31), type3Unk (41), type3Sec (42), type3Dnu (43), type3SsmBased (44), notApplicable (255) }currentThis TEXTUAL CONVENTION defines the quality Level. The QL divided to 3 types: Type 1 - Type 2 - Type 3 -
GnssModeINTEGER { notApplicable (1), gps (2), glonass (3), galileo (4), beidou (5) }currentThis TEXTUAL CONVENTION defines the GNSS mode.
SyncRateINTEGER { r16pps (1), r32pps (2), r64pps (3), r128pps (4) }currentThis TEXTUAL CONVENTION defines the sync packet rate.
MIB Viewer