RAD-Pw-MIB
146 objects
PW MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.14 | IdentityradPw | PW MIB. | ||
| 1.3.6.1.4.1.164.14.0 | NoderadPwNotifications | |||
| 1.3.6.1.4.1.164.14.0.1 | NotificationpwConfigMismatch | current | This trap indicates that a configuration mismatch was detected on the PW. Mismatches can be detected for example in: TDMoIP frame format, received frame length… | |
| 1.3.6.1.4.1.164.14.0.2 | NotificationpwOamFailure | current | This trap indicates that the OAM PW is disconnected. | |
| 1.3.6.1.4.1.164.14.0.3 | NotificationpwRdi | current | This trap indicates that a Remote Defect indication at the far end device was detected on the PW. | |
| 1.3.6.1.4.1.164.14.0.4 | NotificationpwRxFailure | current | This trap indicates that Ethernet frames were not received on the PW. | |
| 1.3.6.1.4.1.164.14.0.9 | NotificationpwJitterBufferOverflow | current | This trap indicates that PW Jitter Buffer Overflow . | |
| 1.3.6.1.4.1.164.14.0.10 | NotificationpwJitterBufferUnderflow | current | This trap indicates that PW Jitter Buffer Underflow . | |
| 1.3.6.1.4.1.164.14.0.11 | NotificationpwOamDelayTca | current | This trap indicates that OAM PW Delay threshold crossing alert. | |
| 1.3.6.1.4.1.164.14.0.12 | NotificationpwOamDelayTcaOff | current | This trap indicates that OAM PW Delay is in the permitted range. | |
| 1.3.6.1.4.1.164.14.1 | NoderadPwCfgObjects | |||
| 1.3.6.1.4.1.164.14.1.1 | NoderadPwGenCfgObjects | |||
| 1.3.6.1.4.1.164.14.1.1.1 | TablepwGenTable | not-accessible | current | This table contains general configuration for PW connection. |
| 1.3.6.1.4.1.164.14.1.1.1.1 | RowpwGenEntry | not-accessible | current | This table is indexed by pwIdx, the value of which is equal to the same index that was created for the associated entry in the PW Table (in the PW-STD-MIB)- th… |
| 1.3.6.1.4.1.164.14.1.1.1.1.1 | ColumnpwIdx | not-accessible | current | Index of this table. The value for this object is equal to the value of pwIndex from the pwTable of PW-STD-MIB |
| 1.3.6.1.4.1.164.14.1.1.1.1.2 | ColumnpwGenPeerIdx | read-write | current | This object indicates the Index of the Peer (as it is defined in the Peer Table), which terminated this PW. |
| 1.3.6.1.4.1.164.14.1.1.1.1.3 | ColumnpwGenAttachmentCircuit | read-write | current | This is a unique index within the ifTable. It represents the attached circuit interface (e.g ATM VC, HDLC) attached to this PW connection (from service initiat… |
| 1.3.6.1.4.1.164.14.1.1.1.1.4 | ColumnpwGenOutgoingInterface | read-write | current | This is a unique index within the ifTable. It represents the outgoing interface (towards the PSN ) attached to this PW connection. This object is applicable on… |
| 1.3.6.1.4.1.164.14.1.1.1.1.5 | ColumnpwGenOamMode | read-write | current | This objects defines whether OAM will be enabled on this PW. notApplicable(1) value will be used when PW type does not support OAM. |
| 1.3.6.1.4.1.164.14.1.1.1.1.6 | ColumnpwGenOamType | read-write | current | This objects defines the failure detection mechanism used on this PW. BFD - Bidirectional Forwarding Detection notApplicable(1) value will be used when pwGenOa… |
| 1.3.6.1.4.1.164.14.1.1.1.1.7 | ColumnpwGenSequenceNumberField | read-write | current | This object defines whether processing of Sequence Number field (ATM cell encapsulation) will be done by device, on this PW. |
| 1.3.6.1.4.1.164.14.1.1.1.1.8 | ColumnpwGenNextHopType | read-write | current | Indicates address type of the Next Hop. Not applicable for device with router. |
| 1.3.6.1.4.1.164.14.1.1.1.1.9 | ColumnpwGenNextHop | read-write | current | Not applicable (=0) when pwMplsEgressTunnelNextHopType=notApplicable. When applicable, represents ATM VC, Bridge Port, according to pwMplsEgressTunnelNextHopTy… |
| 1.3.6.1.4.1.164.14.1.1.1.1.10 | ColumnpwGenIpNextHop | read-write | current | This object defines local Next Hop IP Address for this PW. 0.0.0.0 - means - not applicable. This object is applicable only when pwGenNextHopType=ipV4 |
| 1.3.6.1.4.1.164.14.1.1.1.1.11 | ColumnpwGenMacNextHop | read-write | current | This object defines local Next Hop MAC Address for this PW. 0:0:0:0:0:0 - means - not applicable. This object is applicable only when pwGenNextHopType=bridgePo… |
| 1.3.6.1.4.1.164.14.1.1.1.1.12 | ColumnpwGenEnableVlanTag | read-write | current | This object enables or disables a VLAN tag on every transmitted packet via this PW connection |
| 1.3.6.1.4.1.164.14.1.1.1.1.13 | ColumnpwGenVlanId | read-write | current | This object indicates the VLAN ID tag attached to every transmitted packet via this PW connection. This entry is applicable only if pwGenEnableVlanTag=enabled(… |
| 1.3.6.1.4.1.164.14.1.1.1.1.14 | ColumnpwGenVlanPriority | read-write | current | This object indicates the VLAN priority assigned to every transmitted packet via this PW connection. This entry is applicable only if pwGenEnableVlanTag=enable… |
| 1.3.6.1.4.1.164.14.1.1.1.1.15 | ColumnpwGenIpTos | read-write | current | This object indicates TOS field value for PW having pwPsnType= ip(3) |
| 1.3.6.1.4.1.164.14.1.1.1.1.16 | ColumnpwGenSourceUdpPort | read-write | current | This object indicates source UDP port (1...65535) value for pw having pwPsnType= ip (3) |
| 1.3.6.1.4.1.164.14.1.1.1.1.17 | ColumnpwGenSubType | read-write | current | This object indicates the PW Sub Type (i.e. Sub Type of 'pwType' from 'pwTable'). For ACE-3000 devices: It is applicable only when pwType = basicCesPsn(21). |
| 1.3.6.1.4.1.164.14.1.1.1.1.18 | ColumnpwGenSourceIpAddress | read-write | current | Source IP Address per PW |
| 1.3.6.1.4.1.164.14.1.1.1.1.19 | ColumnpwGenSourceIpMask | read-write | current | Source IP Mask per PW |
| 1.3.6.1.4.1.164.14.1.1.1.1.21 | ColumnpwGenUdpMuxMethod | read-write | current | This objects defines the method in which the UDP header is used to multiplex between different PWs, as follows: sourcePort - validate the destination port valu… |
| 1.3.6.1.4.1.164.14.1.1.1.1.23 | ColumnpwGenOamStatus | read-only | current | This objects indicates the status of the PW OAM: disabled - the PW is shutdown and/or OAM is disabled for the PW. connected - OAM is enabled and is synchronize… |
| 1.3.6.1.4.1.164.14.1.1.1.1.24 | ColumnpwGenMismatchReason | read-only | current | This object details the PW configuration mismatch. |
| 1.3.6.1.4.1.164.14.1.1.1.1.27 | ColumnpwGenOamDelayThreshold | read-write | current | This objects defines a Delay Threshold in microseconds when this value is exceeded an event is sent. (used as rising threshold) Rising threshold range of value… |
| 1.3.6.1.4.1.164.14.1.1.1.1.28 | ColumnpwGencasFramesPerPacket | read-write | current | This objects defines the Frames Per Packet: 4 - E1/T1 frames per packet, packetization delay of 0.5 m.s. 8 - E1/T1 frames per packet, packetization delay of 1 … |
| 1.3.6.1.4.1.164.14.1.1.1.1.29 | ColumnpwGenOamDelayThresholdFalling | read-write | current | This objects defines a PW OAM Delay falling Threshold in microseconds units. When delay reach below this value, event is cleared. Falling threshold range of va… |
| 1.3.6.1.4.1.164.14.1.1.2 | ScalarpwGenTimeout | read-write | current | This object defines the Timeout period, measured in usec. This object is relevant only for ATM service. |
| 1.3.6.1.4.1.164.14.1.1.3 | ScalarpwGenMisorderWindowSize | read-write | current | This object defines the Window Size (in packets), in which the device will attempt to reorder packets. Packets having sequence number with gap greater than the… |
| 1.3.6.1.4.1.164.14.1.1.4 | ScalarpwGenFixMisorderSupport | read-write | current | This object defines whether the process of reorder, within the Window Size (pwGenMisorderWindowSize), should be activated or not. This object is relevant only … |
| 1.3.6.1.4.1.164.14.1.1.5 | TablepwGenLabelTable | not-accessible | current | This table defines supported range of PW labels. |
| 1.3.6.1.4.1.164.14.1.1.5.1 | RowpwGenLabelEntry | not-accessible | current | Entry in this table defines range of PW labels in the direction and type indicated by pwGenLabelType and pwGenLabelDirection. |
| 1.3.6.1.4.1.164.14.1.1.5.1.1 | ColumnpwGenLabelType | not-accessible | current | This object defines type of label. |
| 1.3.6.1.4.1.164.14.1.1.5.1.2 | ColumnpwGenLabelDirection | not-accessible | current | This object defines PW direction. |
| 1.3.6.1.4.1.164.14.1.1.5.1.3 | ColumnpwGenLabelMinValue | read-write | current | This object defines minimum value of PW labels, in the direction and type indicated by pwGenLabelType and pwGenLabelDirection. |
| 1.3.6.1.4.1.164.14.1.1.5.1.4 | ColumnpwGenLabelMaxValue | read-write | current | This object define maximum value of PW labels, in the direction and type indicated by pwGenLabelType and pwGenLabelDirection. |
| 1.3.6.1.4.1.164.14.1.1.6 | TablepeerTable | not-accessible | current | The Peer Table |
| 1.3.6.1.4.1.164.14.1.1.6.1 | RowpeerEntry | not-accessible | current | An entry in this table. |
| 1.3.6.1.4.1.164.14.1.1.6.1.1 | ColumnpeerIndex | not-accessible | current | This object represents the Peer Index. |
| 1.3.6.1.4.1.164.14.1.1.6.1.2 | ColumnpeerRowStatus | read-create | current | This object is used for creating, modifying and deleting a row of this table. |
| 1.3.6.1.4.1.164.14.1.1.6.1.3 | ColumnpeerAddressType | read-create | current | This object represents the Address Type of the Peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. T… |
| 1.3.6.1.4.1.164.14.1.1.6.1.4 | ColumnpeerAddress | read-create | current | This object represents the Peer node Address. of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (pee… |
| 1.3.6.1.4.1.164.14.1.1.6.1.5 | ColumnpeerName | read-create | current | This object represents the Peer Name. |
| 1.3.6.1.4.1.164.14.1.1.6.1.6 | ColumnpeerNoOfUsages | read-only | current | This object indicates the number of times this Peer is used (by PWs, Egress LSP Tunnels etc). |
| 1.3.6.1.4.1.164.14.1.1.6.1.7 | ColumnpeerTargeted | read-create | current | This object indicates whether the Peer is configured as a Targeted Peer or not. |
| 1.3.6.1.4.1.164.14.1.1.6.1.8 | ColumnpeerNextHopAddressType | read-create | current | This object represents the Address Type of the Peer Next Hop node. It should be set to 'unknown' if the address is unknown. |
| 1.3.6.1.4.1.164.14.1.1.6.1.9 | ColumnpeerNextHopAddress | read-create | current | This object represents the Peer Next Hop node Address. This object SHOULD contain a value of all zeroes if not applicable (peerAddrType is 'unknown'). |
| 1.3.6.1.4.1.164.14.1.1.6.1.10 | ColumnpeerAddressClass | read-create | current | This object defines if the Peer address is given as an IP address or a MAC address. The value of peerAddressClass indicates whether the relevant objects are pe… |
| 1.3.6.1.4.1.164.14.1.1.6.1.11 | ColumnpeerMacAddress | read-create | current | This object defines the address of the peer node when layer 2 forwarding is used (MEF8) |
| 1.3.6.1.4.1.164.14.1.1.6.1.12 | ColumnpeerRouterInstance | read-create | current | This object defines the instance of the routing domain that this peer belongs to. |
| 1.3.6.1.4.1.164.14.1.2 | NoderadPwPsnCfgObjects | |||
| 1.3.6.1.4.1.164.14.1.2.1 | NoderadPwPsnCfgMpls | |||
| 1.3.6.1.4.1.164.14.1.2.1.1 | TablepwMplsCfgTable | not-accessible | current | This table contains MPLS PSN related configuration for PW connection. |
| 1.3.6.1.4.1.164.14.1.2.1.1.1 | RowpwMplsCfgEntry | not-accessible | current | This table is indexed by pwIdx, the value of which is equal to the same index that was created for the associated entry in the PW Table (in the PW-STD-MIB)- th… |
| 1.3.6.1.4.1.164.14.1.2.1.1.1.1 | ColumnpwMplsCfgIngressTunnel | read-create | current | This object points to an entry of pwMplsIngressTunnelTable. Its value is equal to pwMplsIngressTunnelIndex |
| 1.3.6.1.4.1.164.14.1.2.1.1.1.2 | ColumnpwMplsCfgEgressTunnel | read-create | current | This object points to an entry of pwMplsEgressTunnelTable. Its value is equal to pwMplsEgressTunnelIndex. |
| 1.3.6.1.4.1.164.14.1.3 | NoderadPwServiceCfgObjects | |||
| 1.3.6.1.4.1.164.14.1.3.1 | NoderadPwServiceCfgTDMoIp | |||
| 1.3.6.1.4.1.164.14.1.3.1.1 | TablepwTDMoIpTable | not-accessible | current | This table contains TDMoIP Service related configuration for PW connection. |
| 1.3.6.1.4.1.164.14.1.3.1.1.1 | RowpwTDMoIpEntry | not-accessible | current | This table is indexed by pwIdx, the value of which is equal to the same index that was created for the associated entry in the PW Table (in the PW-STD-MIB)- th… |
| 1.3.6.1.4.1.164.14.1.3.1.1.1.1 | ColumnpwTDMoIpCfgIndex | read-write | current | Index to TDMoIP table below. Multiple TDMoIP PWs MAY share a single pwTDMoIpCfgEntry |
| 1.3.6.1.4.1.164.14.1.3.1.2 | ScalarpwTDMoIpIndexNext | read-only | current | This object contains an unused value for pwTDMoIpCfgTableIndex, or a zero to indicate that none exist. Negative values are not allowed, as they do not correspo… |
| 1.3.6.1.4.1.164.14.1.3.1.3 | TablepwTDMoIpCfgTable | not-accessible | current | This table contains TDM over IP service configuration for PW connection. |
| 1.3.6.1.4.1.164.14.1.3.1.3.1 | RowpwTDMoIpCfgEntry | not-accessible | current | This table is indexed by pwIdx, the value of which is equal to the same index that was created for the associated entry in the PW Table (in the PW-STD-MIB)- th… |
| 1.3.6.1.4.1.164.14.1.3.1.3.1.1 | ColumnpwTDMoIpCfgTableIndex | not-accessible | current | Index to an entry in this table |
| 1.3.6.1.4.1.164.14.1.3.1.3.1.2 | ColumnpwTDMoIpCfgRowStatus | read-create | current | Object used for creating, modifying, and deleting a row of this table. |
| 1.3.6.1.4.1.164.14.1.3.1.3.1.3 | ColumnpwTDMoIpCfgPayloadFormat | read-create | current | determine TDM over IP proprietary payload format. |
| 1.3.6.1.4.1.164.14.1.3.1.3.1.4 | ColumnpwTDMoIpCfgFarEndType | read-create | current | Determines TDM over IP Far End type. |
| 1.3.6.1.4.1.164.14.1.3.1.3.1.5 | ColumnpwTDMoIpCfgDelaySensitivity | read-create | current | Determines whether to optimize the clock for accurateness or for constant delay: o Disable (Accurate clock is more important than constant delay) o Enable (Con… |
| 1.3.6.1.4.1.164.14.1.3.1.3.1.6 | ColumnpwTDMoIpCfgFramesInPacket | read-create | current | UDP payload length - determines the ethernet packet size |
| 1.3.6.1.4.1.164.14.1.3.2 | NoderadPwServiceCfgAtm | |||
| 1.3.6.1.4.1.164.14.1.3.2.1 | TablepwAtmCfgXTable | not-accessible | current | This table is an extension of pwAtmCfgTable of PW-ATM-R-MIB. Each row that is added/removed there will be added/removed in this table. |
| 1.3.6.1.4.1.164.14.1.3.2.1.1 | RowpwAtmCfgXEntry | not-accessible | current | This table is indexed by pwIdx, the value of which is equal to the same index that was created for the associated entry in the PW Table (in the PW-STD-MIB)- th… |
| 1.3.6.1.4.1.164.14.1.3.2.1.1.1 | ColumnpwAtmCfgAal5Mode | read-write | current | This objects defines whether AAL5 Mode is enabled for this PW. |
| 1.3.6.1.4.1.164.14.1.3.2.1.1.2 | ColumnpwAtmCfgAal5SduTermType | read-write | current | This objects defines the AAL5-SDU Termination Type. It means - where should the AAL5-SDU PW frame, received from PSN, be forwarded: atm(2) - forwarded into ATM… |
| 1.3.6.1.4.1.164.14.1.3.2.1.1.3 | ColumnpwAtmCfgTimeout | read-write | current | This object defines the Timeout period, measured in usec. Timeout mechanism is used in order to send out a packet before the maximum concatenated cells limit h… |
| 1.3.6.1.4.1.164.14.1.3.3 | NoderadPwServiceCfgFr | |||
| 1.3.6.1.4.1.164.14.1.3.3.1 | TablepwFrCfgTable | not-accessible | current | This table contains a set of parameters for Frame Relay PW in the pwFrTable. |
| 1.3.6.1.4.1.164.14.1.3.3.1.1 | RowpwFrCfgEntry | not-accessible | current | These parameters define the characteristics of a Frame Relay PW. This table is indexed by pwIdx, the value of which is equal to the same index that was created… |
| 1.3.6.1.4.1.164.14.1.3.3.1.1.1 | ColumnpwFrCfgDlciFieldLength | read-write | current | DLCI Field length in bytes. Possible values ae 10, 17 or 24 |
| 1.3.6.1.4.1.164.14.1.3.3.1.1.2 | ColumnpwFrCfgBitMarking | read-write | current | This object defines which Frame Relay bits are copied into the outgoing interface or from the incoming interface. When labeled bit is 1, FR bit is copied. For … |
| 1.3.6.1.4.1.164.14.1.3.3.1.1.3 | ColumnpwFrCfgDlci | read-write | current | DLCI value of Frame Relay VC associated with this PW. |
| 1.3.6.1.4.1.164.14.2 | NoderadPwPerfMonitoring | |||
| 1.3.6.1.4.1.164.14.2.1 | TablepwPerfCurrentXTable | not-accessible | current | This table is an extension of pwPerfCurrentTable (PW-STD-R-MIB). |
| 1.3.6.1.4.1.164.14.2.1.1 | RowpwPerfCurrentXEntry | not-accessible | current | An entry in a table. |
| 1.3.6.1.4.1.164.14.2.1.1.1 | ColumnpwPerfCurrentInCongestDropPackets | read-only | current | The counter for number of received packets that are dropped due to congestion by the PW (from the PSN) in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.1.1.2 | ColumnpwPerfCurrentOutCongestDropPackets | read-only | current | The counter for number of transmitted packets that are dropped due to congestion by the PW (to the PSN) in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.1.1.3 | ColumnpwPerfCurrentInLostPackets | read-only | current | The counter for number of incoming lost packets that are lost due to any reason in the current 15-minute interval. The counter takes into account both missing … |
| 1.3.6.1.4.1.164.14.2.2 | TablepwPerfIntervalXTable | not-accessible | current | This table is an extension of pwPerfIntervalTable (PW-STD-R-MIB). |
| 1.3.6.1.4.1.164.14.2.2.1 | RowpwPerfIntervalXEntry | not-accessible | current | An entry in a table. |
| 1.3.6.1.4.1.164.14.2.2.1.1 | ColumnpwPerfIntervalXNumber | not-accessible | current | A number N, between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently com… |
| 1.3.6.1.4.1.164.14.2.2.1.2 | ColumnpwPerfIntervalInCongestDropPackets | read-only | current | The counter for number of received packets that are dropped due to congestion by the PW (to the PSN) during the interval. |
| 1.3.6.1.4.1.164.14.2.2.1.3 | ColumnpwPerfIntervalOutCongestDropPackets | read-only | current | The counter for number of transmitted packets that are dropped due to congestion by the PW (to the PSN) during the interval. |
| 1.3.6.1.4.1.164.14.2.2.1.4 | ColumnpwPerfIntervalInLostPackets | read-only | current | The counter for number of incoming lost packets that are lost due to any reason in the 15-minute interval. The counter takes into account both missing packets … |
| 1.3.6.1.4.1.164.14.2.3 | TablepwAtmPerfCurrentXTable | not-accessible | current | This table is an extension of pwArmPerfCurrentTable (PW-ATM-R-MIB). |
| 1.3.6.1.4.1.164.14.2.3.1 | RowpwAtmPerfCurrentXEntry | not-accessible | current | An entry in a table. |
| 1.3.6.1.4.1.164.14.2.3.1.1 | ColumnpwAtmPerfCurrentInDiscardTotalCells | read-only | current | The number of total received cells (CLP0 and CLP1) that were discarded by the traffic policer, in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.3.1.2 | ColumnpwAtmPerfCurrentInDiscardClp0Cells | read-only | current | The number of received CLP0 cells that were discarded by the traffic policer, in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.3.1.3 | ColumnpwAtmPerfCurrentTaggedCells | read-only | current | The number of cells that were tagged by the traffic policer from CLP=0 to CLP=1, in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.4 | TablepwAtmPerfIntervalXTable | not-accessible | current | This table is an extension of pwAtmPerfIntervalTable (PW-ATM-R-MIB). |
| 1.3.6.1.4.1.164.14.2.4.1 | RowpwAtmPerfIntervalXEntry | not-accessible | current | An entry in a table. |
| 1.3.6.1.4.1.164.14.2.4.1.1 | ColumnpwAtmPerfIntervalXNumber | not-accessible | current | A number N, between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently com… |
| 1.3.6.1.4.1.164.14.2.4.1.2 | ColumnpwAtmPerfIntervalInDiscardTotalCells | read-only | current | The number of total received cells (CLP0 and CLP1) that were discarded by the traffic policer, during the interval. |
| 1.3.6.1.4.1.164.14.2.4.1.3 | ColumnpwAtmPerfIntervalInDiscardClp0Cells | read-only | current | The number of received CLP0 cells that were discarded by the traffic policer, during the interval. |
| 1.3.6.1.4.1.164.14.2.4.1.4 | ColumnpwAtmPerfIntervalTaggedCells | read-only | current | The number of cells that were tagged by the traffic policer from CLP=0 to CLP=1, during the interval. |
| 1.3.6.1.4.1.164.14.2.5 | TablepwPerfConnTable | not-accessible | current | This table provides connectivity statistics for PW troubleshooting. |
| 1.3.6.1.4.1.164.14.2.5.1 | RowpwPerfConnEntry | not-accessible | current | An entry in a table. |
| 1.3.6.1.4.1.164.14.2.5.1.1 | ColumnpwPerfConnJitterBufferLevel | read-only | current | The gauge that shows the current level (depth), in microseconds, of the jitter buffer. |
| 1.3.6.1.4.1.164.14.2.5.1.2 | ColumnpwPerfConnMinJitterBufferLevel | read-only | current | The gauge that shows the minimum level (depth), in microseconds, of the jitter buffer since the last statistics reset. |
| 1.3.6.1.4.1.164.14.2.5.1.3 | ColumnpwPerfConnMaxJitterBufferLevel | read-only | current | The gauge that shows the maximum level (depth), in microseconds, of the jitter buffer since the last statistics reset. |
| 1.3.6.1.4.1.164.14.2.5.1.4 | ColumnpwPerfConnRoundTripDelay | read-only | current | The gauge that shows the current round trip delay (RTD), in microseconds. |
| 1.3.6.1.4.1.164.14.2.5.1.5 | ColumnpwPerfConnMinRoundTripDelay | read-only | current | The gauge that shows the minimum round trip delay (RTD), in microseconds, since the last statistics reset. |
| 1.3.6.1.4.1.164.14.2.5.1.6 | ColumnpwPerfConnMaxRoundTripDelay | read-only | current | The gauge that shows the maximum round trip delay (RTD), in microseconds, since the last statistics reset. |
| 1.3.6.1.4.1.164.14.2.5.1.7 | ColumnpwPerfConnClearStats | read-write | current | A command that instructs the agent to clear the connectivity statistics i.e. to reset the values of the minimum and maximum jitter buffer levels and RTDs. Sett… |
| 1.3.6.1.4.1.164.14.2.6 | TablepwPerfConnCurrentTable | not-accessible | current | This table provides per-PW connectivity statistics for the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.6.1 | RowpwPerfConnCurrentEntry | not-accessible | current | An entry in this table is created by the agent for every PW. After 15 minutes, the contents of this table entry are copied to a new entry in the pwPerfConnInte… |
| 1.3.6.1.4.1.164.14.2.6.1.1 | ColumnpwPerfConnCurrentMinJitterBufferLevel | read-only | current | The gauge that shows the minimum level (depth), in microseconds, of the jitter buffer in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.6.1.2 | ColumnpwPerfConnCurrentAvgJitterBufferLevel | read-only | current | The gauge that shows the average level (depth), in microseconds, of the jitter buffer in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.6.1.3 | ColumnpwPerfConnCurrentMaxJitterBufferLevel | read-only | current | The gauge that shows the maximum level (depth), in microseconds, of the jitter buffer in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.6.1.4 | ColumnpwPerfConnCurrentMinRoundTripDelay | read-only | current | The gauge that shows the minimum round trip delay (RTD), in microseconds, in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.6.1.5 | ColumnpwPerfConnCurrentAvgRoundTripDelay | read-only | current | The gauge that shows the average round trip delay (RTD), in microseconds, in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.6.1.6 | ColumnpwPerfConnCurrentMaxRoundTripDelay | read-only | current | The gauge that shows the maximum round trip delay (RTD), in microseconds, in the current 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.7 | TablepwPerfConnIntervalTable | not-accessible | current | This table provides per-PW connectivity statistics for the history 15-minute intervals. |
| 1.3.6.1.4.1.164.14.2.7.1 | RowpwPerfConnIntervalEntry | not-accessible | current | An entry in this table is created by the agent for every pwPerfConnCurrentEntry that is 15 minutes old. The contents of the current entry are copied to the new… |
| 1.3.6.1.4.1.164.14.2.7.1.1 | ColumnpwPerfConnIntervalNumber | not-accessible | current | A number N, between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently com… |
| 1.3.6.1.4.1.164.14.2.7.1.2 | ColumnpwPerfConnIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.164.14.2.7.1.3 | ColumnpwPerfConnIntervalTimeElapsed | read-only | current | The duration of this interval in seconds. Adjustments in the system's time-of-day clock may cause the interval to be greater or less than the normal value. The… |
| 1.3.6.1.4.1.164.14.2.7.1.4 | ColumnpwPerfConnIntervalStartTime | read-only | current | The date and time of start of this interval. Time zone octets are not used (OCTET STRING (SIZE (8)). |
| 1.3.6.1.4.1.164.14.2.7.1.5 | ColumnpwPerfConnIntervalMinJitterBufferLevel | read-only | current | The gauge that shows the minimum level (depth), in microseconds, of the jitter buffer during the history 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.7.1.6 | ColumnpwPerfConnIntervalAvgJitterBufferLevel | read-only | current | The gauge that shows the average level (depth), in microseconds, of the jitter buffer during the history 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.7.1.7 | ColumnpwPerfConnIntervalMaxJitterBufferLevel | read-only | current | The gauge that shows the maximum level (depth), in microseconds, of the jitter buffer during the history 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.7.1.8 | ColumnpwPerfConnIntervalMinRoundTripDelay | read-only | current | The gauge that shows the minimum round trip delay (RTD), in microseconds, during the history 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.7.1.9 | ColumnpwPerfConnIntervalAvgRoundTripDelay | read-only | current | The gauge that shows the average round trip delay (RTD), in microseconds, during the history 15-minute interval. |
| 1.3.6.1.4.1.164.14.2.7.1.10 | ColumnpwPerfConnIntervalMaxRoundTripDelay | read-only | current | The gauge that shows the maximum round trip delay (RTD), in microseconds, during the history 15-minute interval. |