RAD-Dacs-MIB
530 objects
Digital Access and Cross Connect System device MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.3 | IdentitydacsMux | Digital Access and Cross Connect System device MIB. | ||
| 1.3.6.1.4.1.164.3.3.0 | IdentitydacsMuxEvents | current | The events for DACS MUX. | |
| 1.3.6.1.4.1.164.3.3.0.1 | NotificationsanityCheckTrap | current | This trap is sent after a data base download attempt. It returns the sanity result status and the configuration no.checked. | |
| 1.3.6.1.4.1.164.3.3.0.2 | NotificationdacsMuxAlarmsTrap | current | This trap is sent when an alarm occurs. | |
| 1.3.6.1.4.1.164.3.3.0.3 | NotificationmdlConnectTrap | current | This trap is sent when a card is removed. | |
| 1.3.6.1.4.1.164.3.3.0.4 | NotificationsysAlrStatusTrap | current | This trap is sent upon any change in the value of any of the variables. | |
| 1.3.6.1.4.1.164.3.3.0.5 | NotificationsysStatusChangedTrap | current | This trap is sent when Leds status is changed. | |
| 1.3.6.1.4.1.164.3.3.0.6 | NotificationcnfgUpdateTrap | current | This trap is sent upon change of the active Configuration DB. | |
| 1.3.6.1.4.1.164.3.3.0.7 | NotificationsysRedundancyStatusTrap | current | The trap is sent upon change in Redundancy Status. | |
| 1.3.6.1.4.1.164.3.3.0.8 | NotificationsysRedundancyActiveCardTrap | current | The trap is sent upon change of Active Main/CL Card. | |
| 1.3.6.1.4.1.164.3.3.0.9 | NotificationsysRedundancyActivePortTrap | current | The trap is sent upon change of Active Port of Redundancy Group. | |
| 1.3.6.1.4.1.164.3.3.1 | NodesystemDacsMux | |||
| 1.3.6.1.4.1.164.3.3.1.1 | NodesysSa | |||
| 1.3.6.1.4.1.164.3.3.1.1.1 | ScalarsysSaSwchStatus | read-only | current | This object indicates the status of the switches on the SA unit. Each switch is represented by a bit. The status is a sum of 2**n, according to the bits. For S… |
| 1.3.6.1.4.1.164.3.3.1.1.2 | ScalarsysSaSwRevision | read-only | current | This object indicates the Software revision of the system. |
| 1.3.6.1.4.1.164.3.3.1.1.3 | ScalarsysSaHwVersion | read-only | current | This object indicates the Hardware version of the system. |
| 1.3.6.1.4.1.164.3.3.1.1.4 | ScalarsysSaPorts | read-only | current | This object indicates the ports that are present in the system. Each possible port is represented by a bit. The value of this object is a sum of 2**n, n=number… |
| 1.3.6.1.4.1.164.3.3.1.1.5 | ScalarsysSaReadSwch | read-write | current | This object indicates wether the configuration will be read from the DIP switches on the SA (stand alone) unit. Each switch is represented by a bit. If the bit… |
| 1.3.6.1.4.1.164.3.3.1.1.6 | ScalarsysSaBuActivePort | read-only | current | This object shows through which port the traffic is flowing (the current Active Port) when the Backup mechanism exists. When No Backup exists in the device, th… |
| 1.3.6.1.4.1.164.3.3.1.2 | NodesysHub | |||
| 1.3.6.1.4.1.164.3.3.1.2.1 | NodesysChas | |||
| 1.3.6.1.4.1.164.3.3.1.2.1.1 | ScalarchassTotalNoOfSlt | read-only | current | This object indicates the number of physical slots in the Hub chassis. |
| 1.3.6.1.4.1.164.3.3.1.2.1.2 | ScalarchassTotalNoOfIoSlt | read-only | current | This object indicates the total number of physical IO slots in the chassis, (not all slots must be occupied and active). |
| 1.3.6.1.4.1.164.3.3.1.2.1.3 | ScalarchassTotalNoOfPsSlt | read-only | current | This object indicates the number of physical Power Supply slots in the chassis. |
| 1.3.6.1.4.1.164.3.3.1.2.1.4 | ScalarchassTotalNoOfClSlt | read-only | current | This object indicates the number of physical Common Logic slots in the chassis. |
| 1.3.6.1.4.1.164.3.3.1.2.1.5 | ScalarchassTotalNoOfMlSlt | read-only | current | This object indicates the number of physical Main Link slots in the chassis (Kmux). |
| 1.3.6.1.4.1.164.3.3.1.2.2 | NodesysDcl | |||
| 1.3.6.1.4.1.164.3.3.1.2.2.1 | TablesysDclTable | not-accessible | current | All the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. The write operation into the Table Ob… |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1 | RowsysDclEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.1 | ColumnsysDclCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. This object is identical for all the configurations (1..2… |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.2 | ColumnsysDclRedundancy | read-write | current | DCL redundancy desired state. |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.3 | ColumnsysDclActiveCl | read-write | current | Active desired DCL. When 'auto' is selected, the system automatically selects the active DCL. |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.4 | ColumnsysDclFlipDelay | read-write | current | If one DCL flip occurred and a second one should be performed, the time from the previous flip is checked. If the time is shorter than the delay specified here… |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.5 | ColumnsysDclFlipUponStnClk | read-write | current | This object allows user to decide (yes/no) if Agent should Flip from one DCL card to another, when there is Station Clock Fail in the Online DCL card. |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.6 | ColumnsysDclChFailThreshold | read-write | current | This object indicates the number of failed channels that will trigger the redundancy procedure. |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.7 | ColumnsysDclChPriority | read-write | current | This object indicates the Priority for all the channels in the Main Access (Common Logic) card. Each channel is represented by 1 bit. The order of the bits in … |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.8 | ColumnsysDclConfigDownloadSrc | read-write | current | In case of mismatch between the 2 CL card's configuration, the user can decide which card has the suitable configuration. The selected configuration will be do… |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.9 | ColumnsysDclSwDownloadSrc | read-write | current | In case of mismatch between the 2 CL card's software, the user can decide which card has the suitable SW. The selected SW will be downloaded from card A to car… |
| 1.3.6.1.4.1.164.3.3.1.2.2.1.1.10 | ColumnsysDclRedundancyStatus | read-only | current | Bit map representing current Redundancy Status. bit 0 - Indicates mismatch between the 2 CL cards' Configuration bit 1 - Indicates mismatch between the 2 CL ca… |
| 1.3.6.1.4.1.164.3.3.1.2.2.2 | ScalarsysDclOnline | read-only | current | The active Dcl card of the agent. |
| 1.3.6.1.4.1.164.3.3.1.2.2.3 | TablesysDclCopyDbTable | not-accessible | current | This table enables to copy a cofiguration from the Offline Dcl to the Online Dcl. |
| 1.3.6.1.4.1.164.3.3.1.2.2.3.1 | RowsysDclCopyDbEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.2.2.3.1.1 | ColumnsysDclCopyDbIdx | read-only | current | This object indicates the Idx of the Cnfg(1..255) being accessed. |
| 1.3.6.1.4.1.164.3.3.1.2.2.3.1.2 | ColumnsysDclCopyDbCmd | read-write | current | When this command is sent to the agent, on(3), the Database specified (Db Idx), will be copied from the Offline Dcl to the Online Dcl. Afterwards the value of … |
| 1.3.6.1.4.1.164.3.3.1.2.2.4 | ScalarsysDclFlipCmd | read-write | current | When the 'flip(3)' command is received by Agent, it will flip (switch) between Offline Dcl and Online Dcl cards. Afterwards the value of this object will autom… |
| 1.3.6.1.4.1.164.3.3.1.3 | NodesysStatus | |||
| 1.3.6.1.4.1.164.3.3.1.3.1 | ScalarsysSDateFormat | read-write | current | This object indicates the date and time format used for the sysSDateAndTimeCmd and for the alarm buffer report. |
| 1.3.6.1.4.1.164.3.3.1.3.2 | ScalarsysSDateCmd | read-write | current | This object indicates the current date as it is known by the agent using its own real-time clock. The format would be as specified by the sysSDateFormat. This … |
| 1.3.6.1.4.1.164.3.3.1.3.3 | ScalarsysSTimeCmd | read-write | current | This object indicates the current time as it is known by the agent using its own real-time clock. This parameter can be set for time synchronization between th… |
| 1.3.6.1.4.1.164.3.3.1.3.4 | ScalarsysSActiveCnfg | read-only | current | This object specifies the configuration number, that is currently active and running. |
| 1.3.6.1.4.1.164.3.3.1.3.5 | ScalarsysSEditCnfg | read-only | current | This object indicates the unique configuration number that is currently loaded into the tmp working space for manipulation and update operations. Value of 255 … |
| 1.3.6.1.4.1.164.3.3.1.3.6 | ScalarsysSEditBy | read-only | current | This entry indicates which MMI application is working on the edited config. The editing phase starts at the first modify operation and ends after a load operat… |
| 1.3.6.1.4.1.164.3.3.1.3.7 | ScalarsysSClkSrc | read-only | current | This entry indicates the source of the system clock. |
| 1.3.6.1.4.1.164.3.3.1.3.8 | ScalarsysSAlrStatus | read-only | current | Indicates the current alarm state only for system level. This object will be : - critical(7): when there is at least one active (ON) critical alarm . - major (… |
| 1.3.6.1.4.1.164.3.3.1.3.9 | ScalarsysSAlrStatusAll | read-only | current | Indicates the current alarm state including all levels: system, card, port. - critical(7): when there is at least one active (ON) critical alarm . - major (3):… |
| 1.3.6.1.4.1.164.3.3.1.3.10 | ScalarsysSTestStatus | read-only | current | Indicates the current test status (for all levels: system, card, port). This attribute will be set to: - on(3): when there is at least one test in progress on … |
| 1.3.6.1.4.1.164.3.3.1.3.11 | ScalarsysSSanityCheckStatus | read-only | current | Upon completion of the Sanity Check process on the TmpCnfg this object will be set to: - fail(2): when there is at least one error (which is not just a warning… |
| 1.3.6.1.4.1.164.3.3.1.3.12 | ScalarsysSNoOfSanityCheckErr | read-only | current | This object indicates the number of errors/warnings discovered by the last Sanity Check process. |
| 1.3.6.1.4.1.164.3.3.1.3.13 | TablesysSErrListTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.1.3.13.1 | RowsysSErrListEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.3.13.1.1 | ColumnsysSErrType | read-only | current | The errors are recorded in the agent, in two separate lists, according to their type: error or warning. |
| 1.3.6.1.4.1.164.3.3.1.3.13.1.2 | ColumnsysSErrIdx | read-only | current | Unique index number to identify an entry in the error or warning list . The maximum value cannot exceed the value of 'sysSNoOfSanityCheckErr' (actually, the su… |
| 1.3.6.1.4.1.164.3.3.1.3.13.1.3 | ColumnsysSErrDescription | read-only | current | This object is a full text description of the sanity check error including error code, IO slot and port numbers related to the code . |
| 1.3.6.1.4.1.164.3.3.1.3.14 | ScalarsysSMaxNoOfCnfg | read-only | current | Maximum number of configurations that can be defined and stored in the DACS agent. If the DACS agent has a large capacity, the maximum will be limited to 254. |
| 1.3.6.1.4.1.164.3.3.1.3.15 | ScalarsysSSelfTestResult | read-only | current | The test is performed by the active Common Logic card. The result will be a sum of 2**n according to the following bit convention: For DXC: bit 0 Database 1 Ch… |
| 1.3.6.1.4.1.164.3.3.1.3.16 | ScalarsysSRelayState | read-only | current | Indicates the current state of the alarm relay. notApplicable - for agents that do not support this object. |
| 1.3.6.1.4.1.164.3.3.1.3.17 | ScalarsysSInvertedAlr | read-only | current | Indicates if there is any Inverted alarm at any level of the system (sys, card, port). notApplicable - for agents that do not support this object. |
| 1.3.6.1.4.1.164.3.3.1.3.18 | TablesysSRdnFlipTable | not-accessible | current | This table includes all the Flip events due to I/O Redundancy since last Clear command of this table. |
| 1.3.6.1.4.1.164.3.3.1.3.18.1 | RowsysSRdnFlipEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.3.18.1.1 | ColumnsysSRdnFlipIdx | read-only | current | Unique index number to identify an entry in the Redundancy Flip list. |
| 1.3.6.1.4.1.164.3.3.1.3.18.1.2 | ColumnsysSRdnFlipSlot | read-only | current | The slot number from which Flip was performed. |
| 1.3.6.1.4.1.164.3.3.1.3.18.1.3 | ColumnsysSRdnFlipPort | read-only | current | The port number from which Flip was performed. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last … |
| 1.3.6.1.4.1.164.3.3.1.3.18.1.4 | ColumnsysSRdnFlipCause | read-only | current | The last cause that caused the Flip from the Slot (Port) of sysSRdnSlot, sysSRdnPort. |
| 1.3.6.1.4.1.164.3.3.1.3.18.1.5 | ColumnsysSRdnFlipDate | read-only | current | Flip event Date. The format will be the one selected by user for sysSDateFormat. |
| 1.3.6.1.4.1.164.3.3.1.3.18.1.6 | ColumnsysSRdnFlipTime | read-only | current | Flip event Time. The format will be hh:mm:ss. |
| 1.3.6.1.4.1.164.3.3.1.3.19 | ScalarsysSRdnFlipTableClearCmd | read-write | current | This command, when Set to 'on', clears the Redundancy Flip table (sysSRdnFlipTable). After clear is performed, the agent will turn the value to 'off' automatic… |
| 1.3.6.1.4.1.164.3.3.1.3.20 | ScalarsysSRdnFlipCmd | read-write | current | This object enables the user to send a command to the Agent, to Flip from a current Online IO card to its Redundant card. The value sent will be an Object Iden… |
| 1.3.6.1.4.1.164.3.3.1.3.21 | TablesysSBusTable | not-accessible | current | This table includes data and status about the internal DXC BUS. |
| 1.3.6.1.4.1.164.3.3.1.3.21.1 | RowsysSBusEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.3.21.1.1 | ColumnsysSBusPortIdx | read-only | current | The DXC BUS port number: - first two digits will be: (IO slot number+10) - last one/two digits will be the Bus port number, in odd numbers: port1 = 1 port2 = 3… |
| 1.3.6.1.4.1.164.3.3.1.3.21.1.2 | ColumnsysSBusStatus | read-only | current | The Status of sysSBusPortIdx. free - not used physical - captured by the port of the card physically installed virtual - captured virtually by another port. Ex… |
| 1.3.6.1.4.1.164.3.3.1.3.21.1.3 | ColumnsysSBusCapturePort | read-only | current | The Port that Captured the sysSBusPortIdx. - if sysSBusStatus=free, the value will be 'none'=0 - else, if sysSBusStatus=fixed, the value will be: sysSBusPortId… |
| 1.3.6.1.4.1.164.3.3.1.3.21.1.4 | ColumnsysSBusUtilization | read-only | current | Utilization of sysSBusPortIdx resources, in percent [%]. |
| 1.3.6.1.4.1.164.3.3.1.3.22 | TablesysSRdnCmdTable | not-accessible | current | This table includes commands used for IO Redundancy. |
| 1.3.6.1.4.1.164.3.3.1.3.22.1 | RowsysSRdnCmdEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.3.22.1.1 | ColumnsysSRdnEnforcedChannel | read-write | current | This is a command to override all switching considerations and enforce use of primary/ secondary connection only. noEnforcement - cancels the state of override… |
| 1.3.6.1.4.1.164.3.3.1.3.22.1.2 | ColumnsysSRdnLockFlip | read-write | current | This is a command to lock the Redundancy flip for this redundancy couple. Default = off(2). |
| 1.3.6.1.4.1.164.3.3.1.3.22.1.3 | ColumnsysSRdnManualFlip | read-write | current | This is a command to move to manual Redundancy flip mode for this redundancy couple. Default = off(2). |
| 1.3.6.1.4.1.164.3.3.1.3.23 | ScalarsysSAlrAttrIndication | read-only | current | This object indicates the status of the Alarm Attributes for the whole device. It is a sum of 2**(Bit-1). A Bit will be '1', when any alarm in the device is Fi… |
| 1.3.6.1.4.1.164.3.3.1.4 | NodesysCurrentAlr | |||
| 1.3.6.1.4.1.164.3.3.1.4.1 | TablesysSAlrTable | not-accessible | current | List of system level current existing alarms . |
| 1.3.6.1.4.1.164.3.3.1.4.1.1 | RowsysSAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.1 | ColumnsysSAlrIdx | read-only | current | An index number of the current system alarms. |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.2 | ColumnsysSAlrCode | read-only | current | This object indicates a code related to a specific alarm description. The list of codes and their related descriptions will be sent to NMS request (for display… |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.3 | ColumnsysSAlrState | read-only | current | This object indicates the alarm Severity. |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.4 | ColumnsysSAlarmMask | read-only | current | Alarm Mask is : on/off. |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.5 | ColumnsysSAlarmInvert | read-only | current | Alarm Invert is : on/off. |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.6 | ColumnsysSAlarmOnOff | read-only | current | Alarm state is : on/off. |
| 1.3.6.1.4.1.164.3.3.1.4.1.1.7 | ColumnsysSAlarmCounter | read-only | current | A counter - how many times the alarm occured (ON) since last clear operation or since last Reset. |
| 1.3.6.1.4.1.164.3.3.1.4.2 | ScalarsysSAlrClearCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on the system level alarms . Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.1.4.3 | ScalarsysSAlrClearAllCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on all levels alarms . Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.1.4.4 | ScalarsysSAlrMaskAll | read-write | current | on(3) - will cause masking of all the system level alarms. These alarms will not be sent to NMS and will not be taken into account for Alarms Status. off(2) - … |
| 1.3.6.1.4.1.164.3.3.1.4.5 | ScalarsysSAlrMask | read-write | current | This object is a mask that indicates which system level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor tak… |
| 1.3.6.1.4.1.164.3.3.1.4.6 | ScalarsysSAlrDataUpdateCmd | read-write | current | on(3) - will cause Update of the Alarms Severity, Attributes and Report tables. off(2) - Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.1.5 | NodesysBufferAlr | |||
| 1.3.6.1.4.1.164.3.3.1.5.1 | TablesysBufferAlrTable | not-accessible | current | List of current existing alarms (of all levels). |
| 1.3.6.1.4.1.164.3.3.1.5.1.1 | RowsysBufferAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.1 | ColumnsysBufferAlrIdx | read-only | current | An index number of the current alarms. |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.2 | ColumnsysBufferAlrCode | read-only | current | This object indicates a code related to a specific alarm description. The list of codes and thir related descriptions will be known by the NMS (for display pur… |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.3 | ColumnsysBufferAlrState | read-only | current | This object indicates the alarm type. minor/major/warning/critical - indicates appearance of the problem and the type. event - indicates occurence of an event.… |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.4 | ColumnsysBufferAlrSlot | read-only | current | The slot number this alarm refers to. When the alarm refers to a system function OR the DACS agent is a stand-alone unit, the value will be 'notApplicable(255)… |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.5 | ColumnsysBufferAlrPort | read-only | current | The port number this alarm refers to. If the port number is irrelevant to this alarm (if it is a system/card level alarm) the value will be 9999. |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.6 | ColumnsysBufferAlrDate | read-only | current | The date when the alarm occured. The format will be according to sysSDateFormat. |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.7 | ColumnsysBufferAlrTime | read-only | current | The time when the alarm occured. |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.8 | ColumnsysBufferAlrUpTime | read-only | current | The time when the alarm occured. This parameter holds the sysUpTime value when the alarm occured. |
| 1.3.6.1.4.1.164.3.3.1.5.1.1.9 | ColumnsysBufferAlrInfo | read-only | current | This parameter includes information about the alarm (additional to the Description). |
| 1.3.6.1.4.1.164.3.3.1.5.2 | ScalarsysBufferAlrClearCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on the Alarms Buffer. Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.1.6 | NodesysConfig | |||
| 1.3.6.1.4.1.164.3.3.1.6.1 | TablesysCClkSrcTable | not-accessible | current | All the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. For devices with more than one config… |
| 1.3.6.1.4.1.164.3.3.1.6.1.1 | RowsysCClkSrcEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.1 | ColumnsysCClkCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg being accessed ; Idx of 255 relates to the TmpCnfg. It can be also a combination of the configuration number and t… |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.2 | ColumnsysCClkSrcIdx | read-only | current | An index in the table. There are only two entries in the table. master - refers Master clock parameters fallback - refers Fallback clock parameters |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.3 | ColumnsysCClkSrcMode | read-write | current | This entry indicates the source the nodal timing is locked to. none - is an invalid option for Master clock. internal - is an invalid option for Fallback clock… |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.4 | ColumnsysCClkSrcPrt | read-write | current | This entry is valid only when working in rxClk mode (for IPmux1000 this entry will be valid whe working in LBT mode). For ACE2002 in case of invalid entry the … |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.5 | ColumnsysCClkStationFreq | read-write | current | This entry indicates the frequency of the station clock when the source is 'station'. The value will be applicable only when the sysCClkSrcMode is 'station'. |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.6 | ColumnsysCClkRevertiveTimeout | read-write | current | The time in seconds in which the system will monitor the higher level clock source, before decision to revert to that clock. In case the time is zero, revertiv… |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.7 | ColumnsysCClkStationIf | read-write | current | This entry indicates the electrical interface connected to the station clock, when the source is 'station'. The value will be applicable only when the sysCClkS… |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.8 | ColumnsysCClkStationCableMode | read-write | current | This parameter indicates whether both Station clocks get their clock from the same source (Y Cable)or each one get its clock independently. The value will be a… |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.9 | ColumnsysCClkStationOutState | read-write | current | This parameter indicates whether station clock can send its clock to another device. The value will be applicable only when the sysCClkSrcMode is 'station'. |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.10 | ColumnsysCClkSsmBased | read-write | current | This parameter indicates whether clock source will be selected based on receive clock quality, indicated in S1 byte inside SONET/SDH overhead, (encoded as SSM … |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.11 | ColumnsysCClkSSubsystemSlot | read-write | current | This entry indicates the Slot from which the S Subsytem Source will be taken. The value will be applicable only when the sysCClkSrcMode is 'sSubsystem'. |
| 1.3.6.1.4.1.164.3.3.1.6.1.1.12 | ColumnsysCClkRecoveredID | read-write | current | This entry indicates the Recovered Clock ID. The value will be applicable only when sysCClkSrcMode is 'recovered'. |
| 1.3.6.1.4.1.164.3.3.1.6.2 | TablesysCnfgTable | not-accessible | current | All the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. The write operation into the Table Ob… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1 | RowsysCnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.1 | ColumnsysCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. For Gmux2000 the range limitation (1..255) was discard… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.2 | ColumnsysCMatrixMode | read-write | current | Indicates the TS Matrix Mode: bidirectional - TS Assignment Matrix is symmetric. unidirectional - TS Assignment Matrix can be asymmetric. notApplicable - for a… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.3 | ColumnsysCIsdnFormat | read-write | current | ISDN format. This parameter controls the operation mode of the ISDN ports. te - ISDN timing is derived from the signal received from the equipment it is connec… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.4 | ColumnsysCRoutingOnEth | read-write | current | Mng Routing Protocol on the online CL Ethernet port, or on device Ethernet port dedicated for mangement. |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.5 | ColumnsysCAutoConfigEnable | read-write | current | This object enables user to enable/disable activating the Auto Configuration. When Auto Configuration is activated, the device learns its configuration Automat… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.6 | ColumnsysCIntTsAllocMode | read-write | current | This object enables user to select the mode of Internal TS Allocation. static - user has to select for each Dynamic card port, the Maximum TSs expected to be c… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.7 | ColumnsysCBuPrimaryPort | read-write | current | This object enables the user to configure a Backup mechanism. If a backup mechanism exists, it is possible to configure the primary port. The traffic will flow… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.8 | ColumnsysCEnableLanOverTdm | read-write | current | This object enables/disables transferring traffic from the LAN port to the TDM port. It is possible to enable only part of the traffic on the TDM port for secu… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.9 | ColumnsysCSs7FisuSuppression | read-write | current | SS7 Suppresion is used for SS7 Spoofing. The SS7 spoofing terminates the keep alive messages from the local VMUX without sending them over the network, thus im… |
| 1.3.6.1.4.1.164.3.3.1.6.2.1.10 | ColumnsysCBuRecMode | read-write | current | Recovery Mode. This object determines if after recovery of the Primary Link (used in Vmux) it will become on-line again or not: auto - automatic. In this case,… |
| 1.3.6.1.4.1.164.3.3.1.6.3 | TablesysCRdnTable | not-accessible | current | Configuration of all Redundant I/O cards and ports. The write operation into the table objects is valid only for the TmpCnfg. A Slot/Port that have no Redundan… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1 | RowsysCRdnEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.1 | ColumnsysCRdnCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.2 | ColumnsysCRdnPrimeSlot | read-only | current | The slot number of the Primary card of Redundancy. The Primary card should be the card that user wishes to be the online card (usually the more important one).… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.3 | ColumnsysCRdnPrimePort | read-only | current | The port number. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the por… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.4 | ColumnsysCRdnSecSlot | read-create | current | The slot number of the Secondary card of Redundancy matching the Primary slot. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.5 | ColumnsysCRdnSecPort | read-create | current | The port number. For DXC: For external ports the convention used will be: - first two digits will be: (IO slot number+10) - last one/two digits will be the por… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.6 | ColumnsysCRdnMode | read-create | current | Redundancy Mode. DXC supports yCable(3), singleSlotProtection(6) and dualCableParallelTx(4) MP supports yCable(3), dualCableParallelTx(4), onePlusOne(7) and on… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.7 | ColumnsysCRdnRecMode | read-create | current | Recovery Mode. This object determines if after recovery of the failed Primary card/port it will become on-line again or not: auto - automatic . In this case, t… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.8 | ColumnsysCRdnRecTime | read-create | current | Redundancy Recovery Time (sec). After switching to the current online card, the next switch can be performed only after a minimum time, indicated by this objec… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.9 | ColumnsysCRdnHwSwFlip | read-create | current | HW or SW decision for Redundancy Flip. This object is applicable only for sysCRdnMode=singleSlotProtection. HW - decision is by I/O card SW - decision is by CL… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.10 | ColumnsysCRdnRowStatus | read-create | current | This parameter allows NMS to create/delete entries of this table. The possible supported RowStatus values are active (1) and destroy (6). For Vmux-2100 the sup… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.11 | ColumnsysCRdnOnline | read-only | current | Status - who is the Online (current) Redundancy Slot/Port. This object shows only the Online Slot/Port regarding the Redundancy. mdlSActivity or prtGenActiveSt… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.12 | ColumnsysCRdnSwitchingMode | read-create | current | This object defines which Self Healing Ring (SHR) SDH ring is used: Uni Directional or BiDirectional. The type of the ring is defined according to the directio… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.13 | ColumnsysCRdnFlipUponEvent | read-create | current | This object allows user to define if Flip to the other port will be performed (or not), for certain possible events. Each event is represented by a bit. The va… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.14 | ColumnsysCRdnLosOrLofTime | read-create | current | This parameter determines the time to wait before switching, e.g. after failure (as LOF or LOS) is detected on the TDM Line. For Ipmux time is counted in msec.… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.15 | ColumnsysCRdnEventsTimeWindow | read-create | current | This parameter determines the time window in which to count events to trigger protection switching. For Ipmux time is counted in seconds. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.16 | ColumnsysCRdnSequenceNumberThreshold | read-create | current | This parameter determines the number of Sequence Number errors that should occur in the time window in order to cause switching. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.17 | ColumnsysCRdnBufferErrorsThreshold | read-create | current | This parameter determines the number of Buffer undeflow/ overflow events occured in the time window that cause switching. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.18 | ColumnsysCRdnBuffUnderrunTime | read-create | current | This parameter determines how much time to wait before switching, after jitter buffer underrun. Switching occurs if no frame arrives within that time. For Ipmu… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.19 | ColumnsysCRdnPrimePriority | read-create | current | The Primary port priority. In ETX2xx/2xxA: When selecting sysCRdnMode = manual (10), this parameter determines the forced active port: low - means that the sec… |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.20 | ColumnsysCRdnSecPriority | read-create | current | The Secondary port priority. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.21 | ColumnsysCRdnWTR | read-create | current | Redundancy Wait to Restore (sec). Valid Values: 0..999, 65535. 65535=NA. When the value <> 65535, the value of sysCRdnRecTime must be 65535. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.22 | ColumnsysCRdnName | read-create | current | A textual name for the redundancy group. |
| 1.3.6.1.4.1.164.3.3.1.6.3.1.23 | ColumnsysCRdnTxDownDurationUponFlip | read-create | current | This object defines the duration (in seconds) the active port transmission is shut down after flip occurs. The transmission is shut down and then opened again … |
| 1.3.6.1.4.1.164.3.3.1.7 | NodesysDbase | |||
| 1.3.6.1.4.1.164.3.3.1.7.1 | ScalarsysDbaseSanityCheckCmd | read-write | current | Setting this attribute to on(3) will initiate the process of Sanity check on the TmpCnfg. Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.1.7.2 | ScalarsysDbaseDownloadCnfgIdxCmd | read-write | current | This attribute specifies the Id of the target RealCnfg to which the TmpCnfg should be transferred. Upon set command, the DACS agent will initiate the Sanity-Ch… |
| 1.3.6.1.4.1.164.3.3.1.7.3 | ScalarsysDbaseUploadCnfgIdxCmd | read-write | current | This attribute specifies the Id of the source Cnfg to be loaded into the TmpCnfg. Upon set operation the actual transfer will be initiated. The operation is va… |
| 1.3.6.1.4.1.164.3.3.1.7.4 | TablesysDbaseFlipTable | not-accessible | current | Dbase Flip time and activation for every configuration. |
| 1.3.6.1.4.1.164.3.3.1.7.4.1 | RowsysDbaseFlipEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.1.7.4.1.1 | ColumnsysDbaseFlipIdx | read-only | current | This attribute indicates the Idx of the Cnfg being the target Configuration. |
| 1.3.6.1.4.1.164.3.3.1.7.4.1.2 | ColumnsysDbaseFlipTime | read-write | current | This attribute indicates the time (HH:MM) when this data base will start being used by the Tmp config. |
| 1.3.6.1.4.1.164.3.3.1.7.4.1.3 | ColumnsysDbaseFlipActivation | read-write | current | This attribute indicates if the Dbase flip will be activated at the time specified for this configuration (enable) or not (disable). No more than one flip shou… |
| 1.3.6.1.4.1.164.3.3.2 | NodemdlDacsMux | |||
| 1.3.6.1.4.1.164.3.3.2.1 | NodemdlGen | |||
| 1.3.6.1.4.1.164.3.3.2.1.0 | NodecardEvents | |||
| 1.3.6.1.4.1.164.3.3.2.1.0.1 | NotificationcardHwFailure | current | This trap indicates HW failure in card indicated by mdlCActualCardType | |
| 1.3.6.1.4.1.164.3.3.2.1.0.2 | NotificationcardMismatch | current | This trap indicates that Card indicated by mdlCProgCardType is incompatible with active DB | |
| 1.3.6.1.4.1.164.3.3.2.1.0.3 | NotificationcardProvisionFailure | current | This trap indicates Provisioning failure of card indicated by mdlCActualCardType due to reason indicated by alarmEventReason | |
| 1.3.6.1.4.1.164.3.3.2.1.0.4 | NotificationcardUnsupportedSw | current | This trap indicates that Module software is not supported | |
| 1.3.6.1.4.1.164.3.3.2.1.0.5 | NotificationcardUnsupportedHw | current | This trap indicates that Module hardware is not supported | |
| 1.3.6.1.4.1.164.3.3.2.1.0.6 | NotificationcardImproperRemoval | current | This trap indicates Improper card removal | |
| 1.3.6.1.4.1.164.3.3.2.1.0.8 | NotificationcardNoResponse | current | This trap indicates Loss of communication with card | |
| 1.3.6.1.4.1.164.3.3.2.1.0.9 | NotificationcardInitFailure | current | This trap indicates that Software download to card indiacted by mdlCActualCardType failed | |
| 1.3.6.1.4.1.164.3.3.2.1.0.10 | NotificationcardReset | current | This trap indicates Card (mdlCActualCardType) Reset | |
| 1.3.6.1.4.1.164.3.3.2.1.0.11 | NotificationcardPluggedIn | current | This trap indicates that card (indicated by mdlCActualCardType) was inserted to slot | |
| 1.3.6.1.4.1.164.3.3.2.1.0.12 | NotificationcardPluggedOut | current | This trap indicates that card (indicated by mdlCProgCardType ) was removed from slot | |
| 1.3.6.1.4.1.164.3.3.2.1.0.14 | NotificationcardConfigurationMismatch | current | This trap indicates a mismatch in the card configuration. | |
| 1.3.6.1.4.1.164.3.3.2.1.1 | TablemdlSTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1 | RowmdlSEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.1 | ColumnmdlSSltIdx | read-only | current | A unique number to identify a slot position in the DACS. The Kilomux should use enumerated values starting with kmx. For IPmux100 use values 1-13, 20. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.2 | ColumnmdlSCardType | read-only | current | This attribute indicates the type of the card installed in the specific slot position. Only PS's are possible in the PS slots. Only CL's are possible in the CL… |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.3 | ColumnmdlSHwVer | read-only | current | This attribute indicates the Hardware version of the card installed in the specific slot position. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.4 | ColumnmdlSSwVer | read-only | current | This attribute indicates the Software version of the card installed in the specific slot position. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.5 | ColumnmdlSAlarmStatus | read-only | current | Indicates the current alarm state only for card level. This object will be set to: - critical(7): when there is at least one active (ON) critical alarm . - maj… |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.6 | ColumnmdlSAlarmStatusAll | read-only | current | Indicates the current card alarm state including the lower level: card, port. This object will be set to: - critical(7): when there is at least one active (ON)… |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.7 | ColumnmdlSTestStatus | read-only | current | This attribute will be on(3) when there is at least one test running on a port of the module; otherwise the value will be off(2). |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.8 | ColumnmdlSHwStatus | read-only | current | This attribute will be fail(2) when a HW FAIL exists on this module (discovered by periodic self test); otherwise the value will be ok(3). |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.9 | ColumnmdlSActivity | read-only | current | notApplicable - when the slot is empty (no module) offline(1) - when the module is not active (redundant) online (2) - when the module is active . |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.10 | ColumnmdlSAlrClearCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on the card level alarms . Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.11 | ColumnmdlSAlrClearAllCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on card and port level alarms . Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.12 | ColumnmdlSAlrMaskAll | read-write | current | on(3) - will cause masking of all the card level alarms. These alarms will not be sent to NMS and will not be taken into account for Alarms Status. off(2) - wi… |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.13 | ColumnmdlSCmd | read-write | current | General object for any special command at card level. 0=NotApplicable, for cards that don't support this object. For KML.10(ISDN) card of KM-2100, the object w… |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.14 | ColumnmdlSReset | read-write | current | Reset action to be performed on the module. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.15 | ColumnmdlSRebuildFrame | read-write | current | Applicable only for KiloMux Main Link cards only. '2' = off, this will be always the Get value. '3' = on, this is the Set command used to Rebuild the Frame. Up… |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.16 | ColumnmdlSBackupSwVer | read-only | current | This attribute indicates the Backup Software version of the card installed in the specific slot position. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.17 | ColumnmdlSSecondaryBackupSwVer | read-only | current | This attribute indicates the Secondary Backup Software version of the card installed in the specific slot position. |
| 1.3.6.1.4.1.164.3.3.2.1.1.1.18 | ColumnmdlSPiggybackVer | read-only | current | This attribute indicates the Piggyback version of the card installed in the specific slot position. |
| 1.3.6.1.4.1.164.3.3.2.1.2 | TablemdlCTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.2.1.2.1 | RowmdlCEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.1 | ColumnmdlCConfigIdx | read-only | current | This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.2 | ColumnmdlCSlotIdx | read-only | current | This object indicates a unique number of the slot position in which the module is inserted. The Kilomux should use enumerated values starting with kmx. |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.3 | ColumnmdlCProgCardType | read-write | current | This object indicates the card type assigned to the specific slot in the common configuration. This object is identical for all the configurations (1..255). On… |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.4 | ColumnmdlCNoOfExtPrt | read-only | current | Number of external ports in the programmed module of the specific slot position |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.5 | ColumnmdlCNoOfIntPrt | read-only | current | Number of internal ports in the programmed module of the specific slot position. |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.6 | ColumnmdlCParam | read-write | current | General configuration object at card level (per configuration). NotApplicable=0, for cards that don't support this object. For D8U and D16U cards of DXC, the o… |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.7 | ColumnmdlCAdminStatus | read-write | current | The desired state of the module. Module adminStatus should be managed for all modules in the shelf. When adminStatus is 'down', this module is not operational … |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.8 | ColumnmdlCActualCardType | read-only | current | This object defines actual card type. |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.9 | ColumnmdlCOperStatus | read-only | current | The current operational state of the module. up The physical module agrees with the pre-provisioned card type, and the configuration of the module succeeded. d… |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.10 | ColumnmdlCDetailedStatus | read-only | current | The module current status. When moduleOperStatus is down(2), but not as a result of setting the moduleAdminStatus to down(2), this object contains the failure … |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.11 | ColumnmdlCEntPhysicalIndex | read-only | current | The object contains index of the related entPhysicalEntry of the ENTITY-MIB, see RFC4133. It points the relevant card and not the card slot. The agent should b… |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.12 | ColumnmdlCReset | read-write | current | Reset action to be performed on the module. Agent should set mdlCReset to off (2) during initialization. |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.13 | ColumnmdlCConfigMismatchReason | read-only | current | This object details the card configuration mismatch in case the object mdlCDetailedStatus is equal to configurationMismatch(7) |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.14 | ColumnmdlCIpAddressType | read-write | current | The object defines type of the mdlCIpAddress as defined in the InetAddress MIB: IPv4 or IPv6. |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.15 | ColumnmdlCIpAddress | read-write | current | The object defines card IP address that will be associated with the card loopback IP interface. |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.16 | ColumnmdlCHardwareFailureReason | read-only | current | |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.22 | ColumnmdlCFanControl | read-write | current | The desired state of the fan. Module fan control shall manage all fans on the module, if there are more than one. When mdlCFanControl is 'up', all module's fan… |
| 1.3.6.1.4.1.164.3.3.2.1.2.1.23 | ColumnmdlCFanOperStatus | read-only | current | The current operational state of the module's fans. Provides the aggregated state of all fans, if there are more than one on the module. up All the fans on the… |
| 1.3.6.1.4.1.164.3.3.2.1.3 | NodemdlAlr | |||
| 1.3.6.1.4.1.164.3.3.2.1.3.1 | TablemdlAlrTable | not-accessible | current | The list of card alarms. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1 | RowmdlAlrEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.1 | ColumnmdlAlrIdx | read-only | current | A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecuti… |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.2 | ColumnmdlAlrSltIdx | read-only | current | This attribute indicates the desired slot position. The Kilomux should use enumerated values starting with kmx. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.3 | ColumnmdlAlrCode | read-only | current | This object indicates a code related to a specific alarm description. The list of codes and their related descriptions will be sent to NMS request (for display… |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.4 | ColumnmdlAlrState | read-only | current | This object indicates the card alarm severity. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.5 | ColumnmdlAlarmMask | read-only | current | Alarm Mask is : on/off. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.6 | ColumnmdlAlarmInvert | read-only | current | Alarm Invert is : on/off. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.7 | ColumnmdlAlarmOnOff | read-only | current | Alarm state is : on/off. |
| 1.3.6.1.4.1.164.3.3.2.1.3.1.1.8 | ColumnmdlAlarmCounter | read-only | current | A counter - how many times the alarm occured (ON) since last clear operation or since last Reset. |
| 1.3.6.1.4.1.164.3.3.2.1.3.2 | TablemdlAlrMaskTable | not-accessible | current | The list of card masked alarms. |
| 1.3.6.1.4.1.164.3.3.2.1.3.2.1 | RowmdlAlrMaskEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.2.1.3.2.1.1 | ColumnmdlAlrMaskSltIdx | read-only | current | This attribute indicates the desired slot position. The Kilomux should use enumerated values starting with kmx. |
| 1.3.6.1.4.1.164.3.3.2.1.3.2.1.2 | ColumnmdlAlrMask | read-write | current | This object is a mask that indicates which card level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor taken… |
| 1.3.6.1.4.1.164.3.3.2.2 | NodemdlCl | |||
| 1.3.6.1.4.1.164.3.3.2.2.1 | TablemdlClTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.2.2.1.1 | RowmdlClEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.2.2.1.1.1 | ColumnmdlClIdx | read-only | current | This object indicates the Cl slot referred. |
| 1.3.6.1.4.1.164.3.3.2.2.1.1.2 | ColumnmdlClSwchStatus | read-only | current | This object indicates the status of the switches on the referred DCL card. Each switch is represented by a bit. The status is a sum of 2**n, according to the b… |
| 1.3.6.1.4.1.164.3.3.2.2.1.1.3 | ColumnmdlClLastFlipDate | read-only | current | Date when last flip occured. The format would be as specified by the sysSDateFormat. |
| 1.3.6.1.4.1.164.3.3.2.2.1.1.4 | ColumnmdlClLastFlipTime | read-only | current | Time when last flip occured. |
| 1.3.6.1.4.1.164.3.3.2.2.1.1.5 | ColumnmdlClLastFlipCause | read-only | current | The cause of last flip. |
| 1.3.6.1.4.1.164.3.3.2.3 | NodemdlPs | |||
| 1.3.6.1.4.1.164.3.3.2.3.1 | TablemdlPsTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.2.3.1.1 | RowmdlPsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.2.3.1.1.1 | ColumnmdlPsIdx | read-only | current | This object indicates the PS card referred. |
| 1.3.6.1.4.1.164.3.3.2.3.1.1.2 | ColumnmdlPsStatus | read-only | current | This object indicates the status of the PS card. |
| 1.3.6.1.4.1.164.3.3.2.3.1.1.3 | ColumnmdlPsTestResult | read-only | current | This object indicates the result of the PS test. ok (1) - the test passed successfully. f12V (2) - 12V FAIL was detected. f5V (3) - 5V FAIL was detected. fMinu… |
| 1.3.6.1.4.1.164.3.3.2.3.1.1.4 | ColumnmdlPsVoltageCurrent | read-only | current | Current PS voltage is in Millivolt. |
| 1.3.6.1.4.1.164.3.3.2.3.1.1.5 | ColumnmdlPsVoltageMin | read-only | current | Minumum PS voltage in Millivolt. |
| 1.3.6.1.4.1.164.3.3.2.3.1.1.6 | ColumnmdlPsVoltageMax | read-only | current | Maximum PS voltage in Millivolt. |
| 1.3.6.1.4.1.164.3.3.3 | NodeprtDacsMux | |||
| 1.3.6.1.4.1.164.3.3.3.1 | NodeprtGen | |||
| 1.3.6.1.4.1.164.3.3.3.1.1 | TableprtGenParamTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.1.1.1 | RowprtGenEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.1 | ColumnprtGenPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.2 | ColumnprtGenSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.3 | ColumnprtGenExtInt | read-only | current | This attribute describes the type of the designated port. Exteral port is a port with a physical connector. Internal port might be of two types, one is a compo… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.4 | ColumnprtGenIfIndex | read-only | current | This attribute indicates the unique interface number assigned to the port. The specific interface of this attribute is the same as the interface identified by … |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.5 | ColumnprtGenActiveStatus | read-only | current | This attribute describes the activity status of the port. unknown(1) indicates that the information is not supported. notUsed(2) indicates that the port is not… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.6 | ColumnprtGenAlrStatus | read-only | current | Indicates the alarm state at port (ch) agent level. This object will be: - critical(7): when there is at least one active (ON) critical alarm . - major (3): wh… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.7 | ColumnprtGenTestStatus | read-only | current | This attribute will be on(3) when there is at least one test in progress (running) on the port; otherwise the value will be off(2). |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.8 | ColumnprtGenTestMask | read-only | current | This is a mask which indicates which tests from the 'prtGenTestCmd' list are allowed for the selected port. If a specific test is allowed, its respective bit w… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.9 | ColumnprtGenTestCmd | read-write | current | Setting this object to a value as detailed furter on (except 0) will initiate a test on the specific port, if the operation is allowed (according to TestMask).… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.10 | ColumnprtGenTestRunning | read-only | current | This object indicates which tests are running currently on the selected port (initiated by user and/or by the system). If a specific test is currently running … |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.11 | ColumnprtGenType | read-only | current | This object describes the type of the selected port. idsl - applicable for external ports of HS-U cards (of DXC) when interface is LT-1. |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.12 | ColumnprtGenInterfaceType | read-only | current | This attribute indicates a unique HW interface type of the selected port. Examples: - for T1 cards: DSU, CSU - for E1 cards: DSU, LTU - for HS cards: v35, rs42… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.13 | ColumnprtGenAlrClearCmd | read-write | current | Setting this attribute to ON, will enforce a clear operation on the port level alarms . Upon completion, the value will automatically change to off(2). noOp - … |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.14 | ColumnprtGenAlrMaskAll | read-write | current | on(3) - will mask all the alarms of the selected port off(2)- will unmask all alarms of the selected port except the ones selected by the prtAlrMaskTable. noOp… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.15 | ColumnprtGenParamStatus | read-only | current | This object indicates Status of parameters specific to the selected port. - For a port that has no special status or is supported by prtSExHsfStatTable - 1 Oct… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.16 | ColumnprtGenRdnStatus | read-only | current | This object indicates if this port is part of a redundant pair and in this case, if it is On or Off. none(1) - No redundancy or Not Applicable off (2) - the po… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.17 | ColumnprtGenTestMaskXP | read-only | current | This is an Expanded test mask of the prtGenTestMask object. The prtGenTestMask object reached its maximum, being an Integer with 31 bits. This object indicates… |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.18 | ColumnprtGenTestCmdXP | read-write | current | This is an Expanded test command of the prtGenTestCmd object. The prtGenTestCmd object reached its maximum, being an Integer with 31 bits. Setting this object … |
| 1.3.6.1.4.1.164.3.3.3.1.1.1.19 | ColumnprtGenTestRunningXP | read-only | current | This is an Expanded object of the prtGenTestRunning object. The prtGenTestRunning object reached its maximum, being an Integer with 31 bits. This object indica… |
| 1.3.6.1.4.1.164.3.3.3.1.2 | TableprtGenTestDurationTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.1.2.1 | RowprtGenTestDurationEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.2.1.1 | ColumnprtGenTestPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.1.2.1.2 | ColumnprtGenTestIdx | read-only | current | This attribute indicates the test, the duration refers. |
| 1.3.6.1.4.1.164.3.3.3.1.2.1.3 | ColumnprtGenTestDuration | read-write | current | This attribute indicates the maximum duration of executing a test on the specific port. This entry applies to the specified test . The resolution will be a min… |
| 1.3.6.1.4.1.164.3.3.3.1.3 | TableprtGenTsTable | not-accessible | current | The write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch),exept some products which enable direct writing to the ActiveCnfg. T… |
| 1.3.6.1.4.1.164.3.3.3.1.3.1 | RowprtGenTsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.3.1.1 | ColumnprtGenTsCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.3.3.1.3.1.2 | ColumnprtGenTsPrtIdx | read-only | current | This attribute indicates a unique port number. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP… |
| 1.3.6.1.4.1.164.3.3.3.1.3.1.3 | ColumnprtGenTsIdx | read-only | current | This attribute indicates a unique time slot position. The valid time slots are 1..25 for T1 Card (25=Fbit) 0..31 for E1 or HS Card . In G732S-E1 lines time slo… |
| 1.3.6.1.4.1.164.3.3.3.1.3.1.4 | ColumnprtGenTsType | read-write | current | The type of Timeslot. If the source or destination port is an HS port,'TS Type' must be 'data'. nc - means that this TimeSlot is not connected. voice, data, vc… |
| 1.3.6.1.4.1.164.3.3.3.1.3.1.5 | ColumnprtGenTsIConPrt | read-write | current | This attribute indicates the internally (In Mux) connected port. The valid port number depends on the IO slot no., the installed card type and the port type: o… |
| 1.3.6.1.4.1.164.3.3.3.1.3.1.6 | ColumnprtGenTsIConTs | read-write | current | This attribute indicates a unique time slot position. The valid time slots are 1..25 for T1 Card (25=Fbit) 0..31 for E1 (or HS) Card. In G732S-E1 lines time sl… |
| 1.3.6.1.4.1.164.3.3.3.1.4 | NodeprtAlr | |||
| 1.3.6.1.4.1.164.3.3.3.1.4.1 | TableprtSAlarmTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1 | RowprtSAlarmEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.1 | ColumnprtSAlarmIdx | read-only | current | A unique number to identify an entry in the alarm status table. Users should use the get next function to read this table because the indexes are not consecuti… |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.2 | ColumnprtSAlarmPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.3 | ColumnprtSAlarmCode | read-only | current | This object indicates a code related to a specific alarm description. The list of codes and their related descriptions will be sent to NMS request (for display… |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.4 | ColumnprtSAlarmState | read-only | current | This object indicates the port alarm severity. |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.5 | ColumnprtSAlarmMask | read-only | current | Alarm Mask is : on/off. |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.6 | ColumnprtSAlarmInvert | read-only | current | Alarm Invert is : on/off. |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.7 | ColumnprtSAlarmOnOff | read-only | current | Alarm state is : on/off. |
| 1.3.6.1.4.1.164.3.3.3.1.4.1.1.8 | ColumnprtSAlarmCounter | read-only | current | A counter - how many times the alarm occured (ON) since last clear operation or since last Reset. |
| 1.3.6.1.4.1.164.3.3.3.1.4.2 | TableprtAlrMaskTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.1.4.2.1 | RowprtAlrMaskEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.4.2.1.1 | ColumnprtAlrMaskPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.1.4.2.1.2 | ColumnprtAlrMask | read-write | current | This object is a mask that indicates which port level alarms are masked. The masked alarms (their bit is set to '1') are neither sent to the manager, nor taken… |
| 1.3.6.1.4.1.164.3.3.3.1.5 | TableprtBertTable | not-accessible | current | This table includes the BERT parameters, counters and commands. The configurable parameters: - prtBertPattern - prtBertInjectRate - prtBertTs - prtBertDirectio… |
| 1.3.6.1.4.1.164.3.3.3.1.5.1 | RowprtBertEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.1 | ColumnprtBertPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.2 | ColumnprtBertPattern | read-write | current | This object indicates the pattern of the BERT. p2Exxm1 = 2Exx-1. pxx = pattern xx. This object is the same for all configurations. notApplicable - when this ob… |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.3 | ColumnprtBertInjectRate | read-write | current | This object indicates the error rate injection of the BERT. r10Emx = 10E-x This object is the same for all configurations. single - single error injection. not… |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.4 | ColumnprtBertInjectErrRateCmd | read-write | current | This object controls activation/deactivation of the Error Rate Injection during BERT. |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.5 | ColumnprtBertInjectSingleErrCmd | read-write | current | This object enables to initiate a Single Error Injection during BERT (on). Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.6 | ColumnprtBertRunTime | read-only | current | This object indicates how much time (seconds) passed since BERT started to run. |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.7 | ColumnprtBertESs | read-only | current | How many Errored Seconds were detected since BERT started to run. Counter for Kmux and MP. |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.8 | ColumnprtBertSyncLoss | read-only | current | How many times Sync Loss was detected since BERT started to run. For some products: number of seconds in which Sync Loss occured since BERT started to run. See… |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.9 | ColumnprtBertErrorBits | read-only | current | How many Error Bits were detected since BERT started to run. |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.10 | ColumnprtBertClearCounters | read-write | current | Setting this object to ON, will enforce a clear operation of some BERT Counters. Upon completion, the value will automatically change to off(2). |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.11 | ColumnprtBertSyncStatus | read-only | current | Sync Status while BERT runs. |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.12 | ColumnprtBertTs | read-write | current | This object indicates on which TSs of the selected port, BERT should be applied. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will not be us… |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.13 | ColumnprtBertResult | read-only | current | This object indicates Result of BERT for the selected port (number of error bits divided to the total number of data bits.) Applicable only if BERT is running … |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.14 | ColumnprtBertTxBits | read-only | current | How many data bits were transmitted since BERT started to run, or since last counter clear (prtBertClearCounters set to on). |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.15 | ColumnprtBertRxBits | read-only | current | How many data bits were Received since BERT started to run, or since last counter clear (prtBertClearCounters set to on). |
| 1.3.6.1.4.1.164.3.3.3.1.5.1.16 | ColumnprtBertTxErrorBits | read-only | current | Number of injected error bits since BERT started to run, or since last counter clear (prtBertClearCounters set to on). |
| 1.3.6.1.4.1.164.3.3.3.1.6 | TableprtMonTable | not-accessible | current | For DXC, the write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch). |
| 1.3.6.1.4.1.164.3.3.3.1.6.1 | RowprtMonEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.6.1.1 | ColumnprtMonCnfgIdx | read-only | current | This object indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg. For products that do not support configurations, 1 will be… |
| 1.3.6.1.4.1.164.3.3.3.1.6.1.2 | ColumnprtMonitoringIdx | read-only | current | This object indicates the Monitoring Port Index. For DXC: The valid port number depends on the IO slot no., the installed card type and the port type: external… |
| 1.3.6.1.4.1.164.3.3.3.1.6.1.3 | ColumnprtMonitoringEnable | read-write | current | This object indicates if the prtMonitoringIdx is configured as a monitoring port or not. disabled = the port is NOT configured to monitor. Setting this object … |
| 1.3.6.1.4.1.164.3.3.3.1.6.1.4 | ColumnprtMonitoringTSs | read-write | current | This object indicates which TSs of the Monitoring port, the test equipment should monitor. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will… |
| 1.3.6.1.4.1.164.3.3.3.1.6.1.5 | ColumnprtMonitoredPort | read-write | current | This object indicates the MONITORED Port Index that the Monitoring port monitors. For DXC: The valid port number depends on the IO slot no., the installed card… |
| 1.3.6.1.4.1.164.3.3.3.1.6.1.6 | ColumnprtMonitoredTSs | read-write | current | This object indicates which TSs of the Monitored port, should be monitored. Each Bit of the Octet represents a TS: 31 ......0 MSB LSB Bit 0 will not be used. I… |
| 1.3.6.1.4.1.164.3.3.3.1.7 | NodeprtCfgParam | |||
| 1.3.6.1.4.1.164.3.3.3.1.7.1 | TableprtCfgParamTable | not-accessible | current | The write operation into the Table Objects is valid only to the TmpCnfg entry. KMUX parameters are for the cards: KMBE/New, KVF.6 family. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1 | RowprtCfgParamEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.1 | ColumnprtCfgParamCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.2 | ColumnprtCfgParamIdx | read-only | current | A unique identifier of the port (within the card when applicable). - For KM-2100: Slot*100+Ch external ports: Ch=1..10 internal ports (sub-channels): Ch=11..20… |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.3 | ColumnprtCfgParamSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not val… |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.4 | ColumnprtCfgParamOperatedMl | read-write | current | The main link for this channel. The field is relevant only for ML modes of Dual, Priority Bumping and Switched Backup. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.5 | ColumnprtCfgParamMlAtoMlBPrio | read-write | current | ML-A to ML-B Priority. The field is relevant only for ML modes of Priority Bumping and Switched Backup. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.6 | ColumnprtCfgParamMlBtoMlAPrio | read-write | current | ML-B to ML-A Priority. The field is relevant only for ML modes of Priority Bumping. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.7 | ColumnprtCfgParamInbandLoopDetection | read-write | current | Inband Loop Detection. The field is relevant for FCD-T1/E1(L) ports. |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.8 | ColumnprtCfgParamInbandLoopPatternCfg | read-write | current | This object indicates if Inband Loop polynomial pattern will be according to RDL Loop (the standard) or User Configurated according to prtCfgParamInbandLoopAct… |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.9 | ColumnprtCfgParamInbandLoopActPattern | read-write | current | This object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The st… |
| 1.3.6.1.4.1.164.3.3.3.1.7.1.1.10 | ColumnprtCfgParamInbandLoopDeactPattern | read-write | current | This object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The st… |
| 1.3.6.1.4.1.164.3.3.3.2 | NodeprtT1E1 | |||
| 1.3.6.1.4.1.164.3.3.3.2.1 | TableprtT1E1StatTable | not-accessible | current | T1/E1 port statistics table. |
| 1.3.6.1.4.1.164.3.3.3.2.1.1 | RowprtT1E1StatEntry | not-accessible | current | An entry in the T1/E1 port statistics table. |
| 1.3.6.1.4.1.164.3.3.3.2.1.1.1 | ColumnprtT1E1SPrtIdx | read-only | current | This attribute indicates a unique port number. The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card typ… |
| 1.3.6.1.4.1.164.3.3.3.2.1.1.2 | ColumnprtT1E1SSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.2.1.1.3 | ColumnprtT1E1OosCount | read-only | current | This object is applicable only for an E1 active port. It provides the number of red alarm events since the last count clearing. |
| 1.3.6.1.4.1.164.3.3.3.2.1.1.4 | ColumnprtT1E1BpvLastMin | read-only | current | This object is applicable only for an E1 active port. It provides the number of BPV (BiPolar Violation) events detected during the last minute. |
| 1.3.6.1.4.1.164.3.3.3.2.1.1.5 | ColumnprtT1E1BpvMax | read-only | current | This object is applicable only for an E1 active port. It provides the maximal number of BPV (BiPolar Violation) events (per minute), detected during the worst … |
| 1.3.6.1.4.1.164.3.3.3.2.2 | TableprtT1E1CnfgTable | not-accessible | current | T1/E1 port configuration table. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1 | RowprtT1E1CnfgEntry | not-accessible | current | An entry in the T1/E1 port configuration table. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.1 | ColumnprtT1E1CnfgIdx | read-only | current | This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.2 | ColumnprtT1E1PrtIdx | read-only | current | This attribute indicates a unique port number. The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card typ… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.3 | ColumnprtT1E1Slt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.4 | ColumnprtT1E1LineType | read-write | current | This variable indicates the variety of T1/E1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can rea… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.5 | ColumnprtT1E1LineCode | read-write | current | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. jbzs=b7zs refers the Jamm… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.6 | ColumnprtT1E1SignalMode | read-write | current | 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed Bit Signaling is in use. 'bitOriented' indicates… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.7 | ColumnprtT1E1Fdl | read-write | current | This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following i… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.8 | ColumnprtT1E1FdlMode | read-write | current | Fdl Mode of the T1 selected port. notApplicable - will be used for an E1 port. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.9 | ColumnprtT1E1Sync | read-write | current | This object enables returning to normal operation, after the end of a main/sub link red alarm event, in reduced time. 'tr62411' - complies with AT&T TR-62411 (… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.10 | ColumnprtT1E1CGA | read-write | current | This object selects the method used to signal the CGA state to the other end, through the main/sub link. 'none' - non-transparent mode. When one of the links (… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.11 | ColumnprtT1E1IdleCode | read-write | current | This object selects the code transmitted to fill idle (unused) time slots in the main link frame. Valid range: (0 - FF HEX) . |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.12 | ColumnprtT1E1OosSignal | read-write | current | 'idle' = '0' = on-hook, idle state 'busy' = '1' = off-hook, busy state 'forcedIdle' = SP = both A and B signaling bits are forced to '0' during out-of-service … |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.13 | ColumnprtT1E1VoiceOos | read-write | current | Voice Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.14 | ColumnprtT1E1DataOos | read-write | current | Data Out-Of-Service code. Valid range: (0 - FF HEX). For agents that do not support this feature, the value will always be 0. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.15 | ColumnprtT1E1LineLengthMask | read-write | current | This attribute is the line length mask parameter used only for T1/DSU interfaces. len400p533ft=length range: 400ft to 533ft 'fcc68' - provides compliance with … |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.16 | ColumnprtT1E1TxGainMask | read-write | current | This attribute is the tx gain mask parameter (dB), used only for T1/CSU interfaces. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.17 | ColumnprtT1E1InbandMng | read-write | current | A unique number to identify an Inband management over the link. internal - supported by KM-2100 only. It means that the management is internal to the frame. It… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.18 | ColumnprtT1E1InbandMngRate | read-write | current | A unique number to identify the rate of the Inband management. It is required only for E1 links and is applicable only when prtExT1E1InbandMng selected is FdlO… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.19 | ColumnprtT1E1DedicatedTs | read-write | current | The value is differently determined for different products. There are two methods: 1) A unique number to identify Dedicated TS of the T1/E1 port. It is applica… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.20 | ColumnprtT1E1InbandMngRoutProt | read-write | current | Inband Mng Routing Protocol of the port. When prtT1E1InbandMng is 'dedicatedPpp'-'proprietary' and 'rip2' are applicable. For other values - only 'proprietary'… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.21 | ColumnprtT1E1LinkMode | read-write | current | regular - TSs are connected by user via TS Assignment only transparent - when a port with this Link Mode is connected to an internal T1/E1 port of a T3/E3 card… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.22 | ColumnprtT1E1Multiplier | read-write | current | The data rate of each TS. The multiplier values can be 56 kbps or 64 kbps. For T1 only. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.23 | ColumnprtT1E1RxGain | read-write | current | This attribute is the rx volume (dB). |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.24 | ColumnprtT1E1RAI | read-write | current | Remote Alarm Signal |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.25 | ColumnprtT1E1LineMode | read-write | current | Interface type of the port. For T1 - csu, dsu are the valid values For E1 - dsu, ltu are the valid values |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.26 | ColumnprtT1E1TS0SaBits | read-write | current | This object is applicable only for E1 ports. For T1, string size will be 0. For E1, it enables user to select the use of TS0 Sa Bits 4..8, by 3 octets: The ord… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.27 | ColumnprtT1E1ConnectedTS | read-only | current | This parameter indicates if there is any connected TS for this interface. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.28 | ColumnprtT1E1Ts0SaBit | read-write | current | This parameter indicates whether to send TS 0, or not. noMng= TS 0 is looped, therefore not sent. mng= TS 0 isn't looped, therefore it is sent. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.29 | ColumnprtT1E1SameFeCnfg | read-write | current | This parameter indicates whether the same E1 configuration parameters and TS assignment are set both to the local and remote device. Read-Write access is appli… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.30 | ColumnprtT1E1RemCrc4 | read-write | current | This object indicates whether the E1 of the Remote device connected to this E1 port, will have CRC-4 or not. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.31 | ColumnprtT1E1MaxTSs | read-write | current | This object is applicable only for DXC D4T1, D4E1, D8T1, D8E1 external ports and D8GSL internal E1 ports. It is relevant only when sysCIntTsAllocMode=static(2)… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.32 | ColumnprtT1E1EocTsConfig | read-write | current | This object indicates whether the use of EOC for TS Configuration is enabled or not. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.33 | ColumnprtT1E1Role | read-write | current | This object indicates whether this port behaves as SUB or Main link. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.34 | ColumnprtT1E1PppEchoFailDetection | read-write | current | This object indicates whether the PPP Echo is taken into account for its Fail Detection. This object is relevant when Inband Mng between devices is Dedicated T… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.36 | ColumnprtT1E1CasOosPattern | read-write | current | This objects defines the Cas Out-Of-Service code space (1) - see prtT1E1CasOosSpaceCode below mark (2) - see prtT1E1CasOosMarkCode below spaceMark (3) - transm… |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.37 | ColumnprtT1E1CasOosSpaceCode | read-write | current | This objects defines the Cas Out-Of-Service code The value that will be transmitted when prtT1E1CasOosPattern = space (1). default = 14. |
| 1.3.6.1.4.1.164.3.3.3.2.2.1.38 | ColumnprtT1E1CasOosMarkCode | read-write | current | This objects defines the Cas Out-Of-Service code The value that will be transmitted when prtT1E1CasOosPattern = mark (2). default = 1. |
| 1.3.6.1.4.1.164.3.3.3.2.3 | TableprtT1E1FdlMsgTable | not-accessible | current | This table is applicable for a T1 interface with 'esf' LineType or E1 interface, when CRC is enabled (LineType). |
| 1.3.6.1.4.1.164.3.3.3.2.3.1 | RowprtT1E1FdlMsgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.2.3.1.1 | ColumnprtT1E1FdlMsgPrtIdx | read-only | current | This attribute indicates a unique port number. The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed card typ… |
| 1.3.6.1.4.1.164.3.3.3.2.3.1.2 | ColumnprtT1E1FdlMsgFdlType | read-only | current | The Fdl type reference of the Fdl message. |
| 1.3.6.1.4.1.164.3.3.3.2.3.1.3 | ColumnprtT1E1FdlMsgSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.2.3.1.4 | ColumnprtT1E1FdlMsg | read-only | current | FDL message. |
| 1.3.6.1.4.1.164.3.3.3.3 | NodeprtHS | |||
| 1.3.6.1.4.1.164.3.3.3.3.1 | TableprtHSParamTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1 | RowprtHSParamEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.1 | ColumnprtHSCnfgIdx | read-only | current | This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.2 | ColumnprtHSPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.3 | ColumnprtHSSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.4 | ColumnprtHSRate | read-write | current | This object indicates the port rate (speed). auto - rate is selected automatically by system. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.5 | ColumnprtHSFifoSize | read-write | current | This object selects the size of the user data channel buffer FIFO used in the DTE2 mode. In the other modes, buffer size is automatically set by the DACS agent… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.6 | ColumnprtHSClkMode | read-write | current | Clock Mode of the user data channel. dce - DACS operates as a DCE and provides transmit and receive clocks to the synchronous user DTE. dte1- DACS supplies the… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.7 | ColumnprtHSCTS | read-write | current | Selection of CTS line state in the user data channel. on - CTS continuously ON. rts - CTS line follows the RTS line. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.8 | ColumnprtHSRtsState | read-only | current | RTS state of the port. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.9 | ColumnprtHSInbandLoopback | read-write | current | This object indicates if Inband Loopback from the Network should be enabled or disabled. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.10 | ColumnprtHSInbandLoopPatternCfg | read-write | current | This object indicates if Inband Loop polynomial pattern will be according to RDL Loop (the standard) or User Configurated according to prtHSActivatePolyPattern… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.11 | ColumnprtHSInbandLoopActPattern | read-write | current | This object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The st… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.12 | ColumnprtHSInbandLoopDeactPattern | read-write | current | This object is a binary string of up to 8 bits. Though the syntax allows for any ASCII characters, for this object only '0' or '1' characters are valid. The st… |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.13 | ColumnprtHSDCD | read-write | current | Selection of DCD line state in the user data channel. linkOK - DCD line is ON only when active link is OK. on - DCD continuously ON. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.14 | ColumnprtHSClkPolarity | read-write | current | This object indicates the clock polarity. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.15 | ColumnprtHSInterfaceType | read-write | current | This object indicates the selected electrical interface type. |
| 1.3.6.1.4.1.164.3.3.3.3.1.1.16 | ColumnprtHSUnframed | read-write | current | Unframed line for HS ports. yes - means that all TSs must be transferred, including TS0. In this case, prtHSRate must be r31x56eq1736Kbps OR r31x64eq1984Kbps. |
| 1.3.6.1.4.1.164.3.3.3.3.2 | TableprtHSBertTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.3.2.1 | RowprtHSBertEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.3.2.1.1 | ColumnprtHSBertPrtIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.3.2.1.2 | ColumnprtHSBertSlt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.3.2.1.3 | ColumnprtHSBertCountClr | read-write | current | Setting this object (to on) initiate bert counter clear operation. Valid only when bert test is active on the specific port. (Every time a new bert test starts… |
| 1.3.6.1.4.1.164.3.3.3.3.2.1.4 | ColumnprtHSBertTestResult | read-only | current | This object indicates the number of Bit Error Rate indicated during the BERT test. Active only when bert test is running on the selected port. |
| 1.3.6.1.4.1.164.3.3.3.4 | NodeprtSP | |||
| 1.3.6.1.4.1.164.3.3.3.4.1 | TableprtSpCnfgTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1 | RowprtSpCnfgEntry | not-accessible | current | All the entries at this table are identical(have the same value) at all the configurations(1..255) except at the TmpCnfg. - For products supporting more than o… |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.1 | ColumnprtSpCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.2 | ColumnprtSpPrtIdx | read-only | current | This attribute indicates a unique port number of the SPor DP port. For DXC, it is the port in the active DCL card: - SP = 1 - NP ; DP = 2 For Kilomux, the port… |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.3 | ColumnprtSpUsage | read-write | current | This attribute indicates what is the usage of the port. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.4 | ColumnprtSpRate | read-write | current | This attribute indicates the operation rate (speed) of the port. auto - automatic rate selection, by the agent. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.5 | ColumnprtSpDataBits | read-write | current | This attribute indicates the number of data bits in async frame |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.6 | ColumnprtSpParity | read-write | current | This attribute indicates the parity mode in async frame |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.7 | ColumnprtSpCallOutMode | read-write | current | This attribute indicates the call-out mode. For DXC - this object is applicable only for the DP port (2). |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.8 | ColumnprtSpInterface | read-write | current | This attribute indicates the supervisory port interface. dce - the DACS appears as a DCE for the port. dte - the DACS operates as a DTE, for connection via mod… |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.9 | ColumnprtSpCTS | read-write | current | CTS line state. This object is applicable only for port (1) = SP |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.10 | ColumnprtSpDcdDelay | read-write | current | DCD delay in msec. d10 = delay of 10msec. This object is applicable only for port (1) = SP |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.11 | ColumnprtSpDsr | read-write | current | DSR line state. This object is applicable only for port (1) = SP |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.12 | ColumnprtSpNoOfRetries | read-write | current | For DXC - this object is applicable only for port (2) = DP. The number of dialing retries requested. Default = 0 |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.13 | ColumnprtSpWaitForConnect | read-write | current | For DXC - this object is applicable only for port (2) = DP. Waiting time for connect, in seconds. Default = 30 sec. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.14 | ColumnprtSpDialMode | read-write | current | For DXC - this object is applicable only for port (2) = DP. Dialing mode. Default=tone |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.15 | ColumnprtSpAltNumMode | read-write | current | For DXC - this object is applicable only for port (2) = DP. It determines wether to use the alternate number or not. Default = no. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.16 | ColumnprtSpPrimaryNum | read-write | current | For DXC - this object is applicable only for port (2) = DP. It is the Primary dialing number. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.17 | ColumnprtSpAltNum | read-write | current | For DXC - this object is applicable only for port (2) = DP. It is the Alternate dialing number. This number is applicable only if prtSpAltNumMode is 'yes'. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.18 | ColumnprtSpRoutProtocol | read-write | current | This attribute indicates the routing protocol of the port. notApplicable - for DP. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.19 | ColumnprtSpCmd | read-write | current | SP Command. For LRS this parameter will be used for a Modem Command. Upon NMS's Get operation for devices that this parameter is notApplicable, agent will send… |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.20 | ColumnprtSpActCallOut | read-write | current | This object indicates when to Activate Call-Out. It is used by FCD-T1/E1. always - to activate call-out always. linkFail - to activate call-out only when Link … |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.21 | ColumnprtSpAlrRelayMode | read-write | current | This attribute indicates the Alarm Relay Mode. notApplicable - for DP. |
| 1.3.6.1.4.1.164.3.3.3.4.1.1.22 | ColumnprtSpStopBits | read-write | current | This attribute indicates number of stop bits in an async frame. |
| 1.3.6.1.4.1.164.3.3.3.5 | NodeprtDim | |||
| 1.3.6.1.4.1.164.3.3.3.5.1 | TableprtDimCnfgTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.5.1.1 | RowprtDimCnfgEntry | not-accessible | current | The write operation into the Table Objects is valid only for the TmpCnfg entry (prtDimCnfgIdx=255). |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.1 | ColumnprtDimCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.2 | ColumnprtDimIdx | read-only | current | This attribute indicates a unique port number of the DIM card. The convention used for DXC: (IO slot number+10)*10 + 1 Example: port1 of IO slot 11 will be: 21… |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.3 | ColumnprtDimTxMode | read-write | current | Tx mode. regularTx - the links are connected to a similar outfit on the other side. In this mode, if a link fails, the transmitted bandwidth is decreased accor… |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.4 | ColumnprtDimPolarity | read-write | current | Polarity. |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.5 | ColumnprtDimClkMode | read-write | current | Clock Mode. smooth - a clock that is not 'pulsed'(has no 'gaps'). In this mode the DXC does NOT receive back the clock signal. extSmooth - same as 'smooth' but… |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.6 | ColumnprtDimMaxDelay | read-write | current | Max Delay permitted between the links, in msec. |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.7 | ColumnprtDimMng | read-write | current | Use of DIM port for management. disabled - no management on DIM ts1 - 1 bit of TS1 is used for management. |
| 1.3.6.1.4.1.164.3.3.3.5.1.1.8 | ColumnprtDimMngRoutProt | read-write | current | Mng Routing Protocol of the port. none - when prtDimMng is 'disabled'. |
| 1.3.6.1.4.1.164.3.3.3.5.2 | TableprtDimDestTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.5.2.1 | RowprtDimDestEntry | not-accessible | current | The write operation is valid only for the TmpCnfg entry (prtDimDestCnfgIdx=255). |
| 1.3.6.1.4.1.164.3.3.3.5.2.1.1 | ColumnprtDestCnfgIdx | read-only | current | This attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg. |
| 1.3.6.1.4.1.164.3.3.3.5.2.1.2 | ColumnprtDestDimIdx | read-only | current | This attribute indicates a unique port number of the DIM card. The convention used for DXC: (IO slot number+10) & 1 Example: port1 of IO slot 11 will be: 211 . |
| 1.3.6.1.4.1.164.3.3.3.5.2.1.3 | ColumnprtDestIdx | read-only | current | This attribute indicates a destination number of the DIM card. |
| 1.3.6.1.4.1.164.3.3.3.5.2.1.4 | ColumnprtDest | read-write | current | Destination port,(of a T1/E1 port), that is connected to the DIM card, for the specified Destination number. 0 = No destination port. Else: For external ports:… |
| 1.3.6.1.4.1.164.3.3.3.5.2.1.5 | ColumnprtDestConnect | read-only | current | Connection Status of the specified destination number. For a specified destination port, it depends both on the status of the port and on the status of the far… |
| 1.3.6.1.4.1.164.3.3.3.6 | NodeprtI | |||
| 1.3.6.1.4.1.164.3.3.3.6.1 | TableprtICnfgTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.3.6.1.1 | RowprtICnfgEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.6.1.1.1 | ColumnprtICnfgIdx | read-only | current | This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. |
| 1.3.6.1.4.1.164.3.3.3.6.1.1.2 | ColumnprtIIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.6.1.1.3 | ColumnprtIRate | read-write | current | This object indicates the port rate in bits. Each TS contains 8 bits. Thus, 1 bit is equivalent to 8Kbps rate. |
| 1.3.6.1.4.1.164.3.3.3.6.1.1.4 | ColumnprtIConnect | read-write | current | D channel connection. no - disconnected yes - connected. |
| 1.3.6.1.4.1.164.3.3.3.7 | NodeprtHdsl | |||
| 1.3.6.1.4.1.164.3.3.3.7.1 | TableprtHdslTable | not-accessible | current | HDSL port table. |
| 1.3.6.1.4.1.164.3.3.3.7.1.1 | RowprtHdslEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.1 | ColumnprtHdslIdx | read-only | current | This attribute indicates a unique number to identify a port. The valid port number depends on the IO slot no., the installed card type and the port type: outsi… |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.2 | ColumnprtHdslMode | read-write | current | This object indicates the HDSL mode. |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.3 | ColumnprtHdslRptrType | read-only | current | The Repeater between Near and Far modem. none - no repeater exists between the modems hrpt - HRPT repeater exists between the modems. |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.4 | ColumnprtHdslMaxRate | read-write | current | Maximum Rate of the xDSL Line, in Kbps units. This object can be Set only for a Central unit. |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.5 | ColumnprtHdslLinkType | read-only | current | The Link Type. msdsl2w - MSDSL 2 Wire hdsl2w - HDSL 2 Wire hdsl4w - HDSL 4 Wire gDsl - G.DSL |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.6 | ColumnprtHdslCompSwVer | read-only | current | This object indicates the Software Version of the component (Piggyback card) supporting this interface. |
| 1.3.6.1.4.1.164.3.3.3.7.1.1.7 | ColumnprtHdslCompHwVer | read-only | current | This object indicates the Hardware Version of the component (Piggyback card) supporting this interface. |
| 1.3.6.1.4.1.164.3.3.3.8 | NodeprtT3E3 | |||
| 1.3.6.1.4.1.164.3.3.3.8.1 | TableprtT3E3CnfgTable | not-accessible | current | T3/E3 port configuration table. |
| 1.3.6.1.4.1.164.3.3.3.8.1.1 | RowprtT3E3CnfgEntry | not-accessible | current | An entry in the T3/E3 port configuration table. |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.1 | ColumnprtT3E3CnfgIdx | read-only | current | This attribute indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For DXC, write operations can be performed… |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.2 | ColumnprtT3E3PrtIdx | read-only | current | This attribute indicates a unique port number. For DXC: The same numbering as for prtGenPrtIdx. The valid port number depends on the IO slot no., the installed… |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.3 | ColumnprtT3E3Slt | read-only | current | This attribute indicates a unique number to identify the slot where the card is inserted in. When the unit is stand-alone, this object is not applicable and 25… |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.4 | ColumnprtT3E3LineLength | read-write | current | This object is the length of the ds3 line in feet. It provides information for line build out circuitry if it exists and can use this object to adjust the line… |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.5 | ColumnprtT3E3InbandMng | read-write | current | A unique number to identify the Frame Type over the link. For Optimux-T3: only values (4), (7) are supported. |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.6 | ColumnprtT3E3AisFrame | read-write | current | This object is applicable only for Optimux-T3. It allows user to select whether the AIS sent will be framed or unframed. |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.7 | ColumnprtT3E3TxClockSource | read-write | current | Tx Clock Source. |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.8 | ColumnprtT3E3RoutProt | read-write | current | Routing Protocol of the port. This object is applicable only for T3 ports. |
| 1.3.6.1.4.1.164.3.3.3.8.1.1.9 | ColumnprtT3E3AisTransmit | read-write | current | Indicates if AIS signal will be transmitted over the tributary E3/DS3 upon failure. |
| 1.3.6.1.4.1.164.3.3.4 | NodegenDacsMux | |||
| 1.3.6.1.4.1.164.3.3.4.1 | TablecmprTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.4.1.1 | RowcmprEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.4.1.1.1 | ColumncmprTypeIdx | read-only | current | This object indicates the Type of the Compressed data referred (which table, which level, etc). The type is a code according to a convention between agent and … |
| 1.3.6.1.4.1.164.3.3.4.1.1.2 | ColumncmprCnfgIdx | read-only | current | This object indicates the configuration number the Compressed information relates to. |
| 1.3.6.1.4.1.164.3.3.4.1.1.3 | ColumncmprVersion | read-only | current | This object indicates the version of the internal format of the Compressed data (the version of the convention used). |
| 1.3.6.1.4.1.164.3.3.4.1.1.4 | ColumncmprSltIdx | read-only | current | This attribute indicates a unique number of the slot position where the card is inserted. When the unit is stand-alone or this object is not applicable, 255 wi… |
| 1.3.6.1.4.1.164.3.3.4.1.1.5 | ColumncmprPrtIdx | read-only | current | This object indicates a unique identifier of the port, the compressed information relates to. For DXC - according to the order in the card of cmprSltIdx: - fir… |
| 1.3.6.1.4.1.164.3.3.4.1.1.6 | ColumncmprObj | read-write | current | This object is the compressed information itself, according to a predefined format, both agent and NMS agreed about. |
| 1.3.6.1.4.1.164.3.3.4.2 | TablemapLinkTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.4.2.1 | RowmapLinkEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.4.2.1.1 | ColumnmapLinkIdx | read-only | current | A unique identifier of the link |
| 1.3.6.1.4.1.164.3.3.4.2.1.2 | ColumnmapLinkSlotIdx | read-write | current | This attribute indicates a unique slot position where the module is inserted. |
| 1.3.6.1.4.1.164.3.3.4.2.1.3 | ColumnmapLinkPortIdx | read-write | current | This attribute indicates a unique port number. The valid port number depends on the IO slot no., the installed card type and the port type: outside, inside, SP… |
| 1.3.6.1.4.1.164.3.3.4.2.1.4 | ColumnmapLinkState | read-only | current | This attribute indicates the status of the link between the two muxes |
| 1.3.6.1.4.1.164.3.3.4.3 | TablealrGenTable | not-accessible | current | A table. |
| 1.3.6.1.4.1.164.3.3.4.3.1 | RowalrGenEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.3.3.4.3.1.1 | ColumnalrGenCode | read-only | current | This object is a unique code number, identifying a certain alarm. |
| 1.3.6.1.4.1.164.3.3.4.3.1.2 | ColumnalrGenDescription | read-only | current | This entry is a unique text description, of the alarm corresponding to the specified code. |
| 1.3.6.1.4.1.164.3.3.4.3.1.3 | ColumnalrGenLevel | read-only | current | Alarm level. |
| 1.3.6.1.4.1.164.3.3.4.3.1.4 | ColumnalrGenSlotType | read-only | current | Slot type that the alarm is relevant to. clAndIo - an alarm that is relevant for both CL and IO slots. |
| 1.3.6.1.4.1.164.3.3.4.3.1.5 | ColumnalrGenSeverity | read-write | current | This object enables the user to select a severity for each alarm. The severity is set per alarm code (same for all slots/ports using this code). |
| 1.3.6.1.4.1.164.3.3.4.3.1.6 | ColumnalrGenDebounce | read-write | current | Debounce time for each alarm code, in seconds. The meaning is, that an alarm will be 'declared' as ON (or OFF), only after it was actually ON/OFF the Debouncin… |
| 1.3.6.1.4.1.164.3.3.4.3.1.7 | ColumnalrGenDefSeverity | read-only | current | This object reports the default severity of each alarm. User can change the severity of the alarms defined by this default via the alrGenSeverity object. |
| 1.3.6.1.4.1.164.6.1.0.73 | NotificationpowerDeliveryFailure | current | This Trap indicates that a power supply failure exists in the device. |