MIB Viewer

RAD-RadBgp-MIB

129 objects
Router BGP MIB.
Imported Objects
INET-ADDRESS-MIBInetAddress InetAddressPrefixLength InetAddressType InetPortNumber
RAD-GEN-MIBalarmEventLogAlarmOrEventId alarmEventLogDateAndTime alarmEventLogDescription alarmEventLogSeverity alarmEventLogSourceName alarmEventReason radSysRtrEvents
RAD-SubRtr-MIBradRouter rtrConfigRoutingName RtrSafi
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-SMIGauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.164.6.1.11.0.3NotificationbgpSessionFailurecurrentThe trap is sent when the BGP session fail.
1.3.6.1.4.1.164.6.1.11.0.4NotificationbgpTcpSessionAuthFailurecurrentThe trap is sent when BGP TCP session authentication fail.
1.3.6.1.4.1.164.6.1.11.0.5NotificationbgpSessionPrefixOverflowcurrentThe trap is sent when BGP session received prefix list reached 90% of its maximum .
1.3.6.1.4.1.164.11.4IdentityrtrBgpRouter BGP MIB.
1.3.6.1.4.1.164.11.4.1TablebgpRibManagerTablenot-accessiblecurrentEach entry in this table represents a RIB Manager entity.
1.3.6.1.4.1.164.11.4.1.1RowbgpRibManagerEntrynot-accessiblecurrentEach entry represents a RIB Manager entity.
1.3.6.1.4.1.164.11.4.1.1.1ColumnbgpRibManagerIndexnot-accessiblecurrentIdentifies a RIB Manager entity.
1.3.6.1.4.1.164.11.4.1.1.2ColumnbgpRibManagerRowStatusread-createcurrentThe row status for this RIB Manager Entity Table entry, used to create and destroy table entries.
1.3.6.1.4.1.164.11.4.1.1.3ColumnbgpRibManagerLocalAsread-createcurrentThe local autonomous system number. If the bgpAsSize is twoOctet, then the range is constrained to be 0-65535. A non-mappable 4-octet AS number should only be …
1.3.6.1.4.1.164.11.4.1.1.4ColumnbgpRibManagerLocalIdentifierread-createcurrentThe BGP Identifier of the local system. This is a generic identifier and not necessarily an IP address. This field can only be changed when the BGP entity is n…
1.3.6.1.4.1.164.11.4.2TablebgpPeerTablenot-accessiblecurrentBGP peer table. This table contains, one entry per BGP peer, and information about the connections with BGP peers.
1.3.6.1.4.1.164.11.4.2.1RowbgpPeerEntrynot-accessiblecurrentEntry containing information about the connection with a BGP peer.
1.3.6.1.4.1.164.11.4.2.1.1ColumnbgpPeerRemoteAddrTypenot-accessiblecurrentThe address family of the remote end of the peering session.
1.3.6.1.4.1.164.11.4.2.1.2ColumnbgpPeerRemoteAddrnot-accessiblecurrentThe address of the remote end of the peering session.
1.3.6.1.4.1.164.11.4.2.1.3ColumnbgpPeerFsmStateread-onlycurrentThe BGP peer's FSM state.
1.3.6.1.4.1.164.11.4.2.1.4ColumnbgpPeerRowStatusread-createcurrentThis object type reflects the status of the row within the agent. An instance of this row is returned by the agent to reflect the validity of the current state…
1.3.6.1.4.1.164.11.4.2.1.5ColumnbgpPeerLocalAddrTyperead-createcurrentThe address family of the local end of the peering session.
1.3.6.1.4.1.164.11.4.2.1.6ColumnbgpPeerLocalAddrread-createcurrentThe address of the local end of the peering session. If a zero length address is used, DC-BGP will not bind a specific address but use whatever is available. I…
1.3.6.1.4.1.164.11.4.2.1.7ColumnbgpPeerRemoteAsread-createcurrentThe remote autonomous system number. This field can only be changed when the BGP peer entry is not active.
1.3.6.1.4.1.164.11.4.2.1.8ColumnbgpPeerLastErrorread-onlycurrentThe last error code and subcode sent or received on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte O…
1.3.6.1.4.1.164.11.4.2.1.9ColumnbgpPeerFsmEstablishedTimeread-onlycurrentThis timer indicates how long this peer has been in the Established state or how long since this peer was last in the Established state. It is set to zero when…
1.3.6.1.4.1.164.11.4.2.1.10ColumnbgpPeerHoldTimeConfigread-createcurrentTime interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BG…
1.3.6.1.4.1.164.11.4.2.1.11ColumnbgpPeerKeepAliveConfigread-createcurrentTime interval in seconds for the KeepAlive configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages'…
1.3.6.1.4.1.164.11.4.2.1.12ColumnbgpPeerHoldTimeread-onlycurrentTime interval in seconds for the Hold Timer established with the peer. The value of this is calculated by this BGP speaker by using the smaller of the value in…
1.3.6.1.4.1.164.11.4.2.1.13ColumnbgpPeerKeepAliveread-onlycurrentTime interval in seconds for the KeepAlive timer established with the peer. The value of this is calculated by this BGP speaker such that, when compared with b…
1.3.6.1.4.1.164.11.4.2.1.14ColumnbgpPeerConfigMaxPrefixread-createcurrentThis object is used to limit the number of prefixes that can be accepted from this peer. Setting bgpPeerConfigMaxPrfx to a non-zero value sets the maximum numb…
1.3.6.1.4.1.164.11.4.2.1.15ColumnbgpPeerPasswordread-createcurrentThe password used by this peer.
1.3.6.1.4.1.164.11.4.2.1.16ColumnbgpPeerCapabilitySentread-onlycurrentThe capabilities announced to the peer on the most recent Open message sent to the peer. This field is set to zero before the first Open message is sent to the…
1.3.6.1.4.1.164.11.4.2.1.17ColumnbgpPeerCapabilityRcvread-onlycurrentThe capabilities received on the most recent Open message received from the peer. This field is set to zero before the first Open message is received from the …
1.3.6.1.4.1.164.11.4.2.1.18ColumnbgpPeerCapabilityNegotiatedread-onlycurrentThe capabilities negotiated for the session with the peer. This field is set to zero before Open messages have been exchanged with the peer, and is unchanged i…
1.3.6.1.4.1.164.11.4.2.1.19ColumnbgpPeerSelectedLocalAddrread-onlycurrentThe address selected for the local end of the peering session. If a connection exists and bgpPeerLocalAddr is specified then these two fields will be identical.
1.3.6.1.4.1.164.11.4.2.1.20ColumnbgpPeerSelectedLocalPortread-onlycurrentThe local port selected for transport connection between the BGP peers. A value of zero implies that there is currently no connection to this peer.
1.3.6.1.4.1.164.11.4.2.1.21ColumnbgpPeerSelectedRemotePortread-onlycurrentThe remote port selected for the transport connection between the BGP peers. A value of zero implies that there is currently no connection to this peer.
1.3.6.1.4.1.164.11.4.2.1.22ColumnbgpPeerClearCmdread-createcurrentReset action to be performed on BGP session.
1.3.6.1.4.1.164.11.4.2.1.23ColumnbgpPeerDescrread-createcurrentThis object is used as a varbind in the BGP Traps the value of this object should be the IP address contained in the remote peer 'bgpPeerRemoteAddr'
1.3.6.1.4.1.164.11.4.3TablebgpPeerAfiSafiTablenot-accessiblecurrentPeer <AFI, SAFI> configuration table. This table allows a user to configure peer characteristics on a per AFI/SAFI basis. Rows in this table cannot be created …
1.3.6.1.4.1.164.11.4.3.1RowbgpPeerAfiSafiEntrynot-accessiblecurrentPeer <AFI, SAFI> configuration table entry.
1.3.6.1.4.1.164.11.4.3.1.1ColumnbgpPeerAfiSafiAfiTypenot-accessiblecurrentThe AFI index into the peer <AFI, SAFI> table.
1.3.6.1.4.1.164.11.4.3.1.2ColumnbgpPeerAfiSafiSafinot-accessiblecurrentThe SAFI index into the peer <AFI, SAFI> table.
1.3.6.1.4.1.164.11.4.3.1.3ColumnbgpPeerAfiSafiStatusread-writecurrentWhen bgpPeerAfiSafiStatus is 'Disable', BGP will not advertise Multiprotocol support to the peer for this address family. When bgpPeerAfiSafiStatus is 'Enable'…
1.3.6.1.4.1.164.11.4.4TablebgpNlriTablenot-accessiblecurrentThe BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. It is equivalent to the bgpM2Nlr…
1.3.6.1.4.1.164.11.4.4.1RowbgpNlriEntrynot-accessiblecurrentInformation about a path to a network.
1.3.6.1.4.1.164.11.4.4.1.1ColumnbgpNlriAfiTypenot-accessiblecurrentThe address family of the prefix for this NLRI.
1.3.6.1.4.1.164.11.4.4.1.2ColumnbgpNlriSafinot-accessiblecurrentThe subsequent address family of the prefix for this NLRI.
1.3.6.1.4.1.164.11.4.4.1.3ColumnbgpNlriPerfixAddressnot-accessiblecurrentAn address prefix in the Network Layer Reachability Information field. This object is an address containing the prefix with length specified by bgpNlriPrfxLen.…
1.3.6.1.4.1.164.11.4.4.1.4ColumnbgpNlriPrefixLennot-accessiblecurrentLength in bits of the IP address prefix in the Network Layer Reachability Information field.
1.3.6.1.4.1.164.11.4.4.1.5ColumnbgpNlriASPathStrread-onlycurrentThis is a string depicting the autonomous system path to this network which was received from the peer which advertised it. If bgpRibManagerAsSize is four-octe…
1.3.6.1.4.1.164.11.4.4.1.6ColumnbgpNlriNextHopread-onlycurrentThe address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The …
1.3.6.1.4.1.164.11.4.4.1.7ColumnbgpNlriAsSizeread-onlycurrentWhether the bgpNlriASPathStr field contains two or four byte AS numbers.
1.3.6.1.4.1.164.11.4.4.1.8ColumnbgpNlriPathAttrMultiExitDiscread-onlycurrentThis metric is used to discriminate between multiple exit points to an adjacent autonomous system. Valid only if bgpNlriPathAttrMEDPrsnt is TRUE.
1.3.6.1.4.1.164.11.4.4.1.9ColumnbgpNlriPathAttrLocalPrefread-onlycurrentThe originating BGP4 speaker's degree of preference for an advertised route.
1.3.6.1.4.1.164.11.4.4.1.10ColumnbgpNlriBestread-onlycurrentAn indication of whether or not this route was chosen as the best BGP4 route.
1.3.6.1.4.1.164.11.4.4.1.11ColumnbgpNlriPathAttrMEDPrsntread-onlycurrentIf true, then the route has an associated MED attribute, whose value is given in bgpNlriPathAttrMultiExitDisc. If false, the route has no MED attribute, and th…
1.3.6.1.4.1.164.11.4.5TablebgpAdjRibOutTablenot-accessiblecurrentThe BGP Adjacent Routing Information Base (Adj-RIB-Out) Table contains the set of routes advertised to each peer.
1.3.6.1.4.1.164.11.4.5.1RowbgpAdjRibOutEntrynot-accessiblecurrentInformation about a path to a network that has been advertised to a peer. The route has been explicitly advertised in an UPDATE message sent to the peer.
1.3.6.1.4.1.164.11.4.5.1.1ColumnbgpAdjRibOutAfiTypenot-accessiblecurrentThe address family of the prefix for this Adj-RIB Out route.
1.3.6.1.4.1.164.11.4.5.1.2ColumnbgpAdjRibOutSafinot-accessiblecurrentThe subsequent address family of the prefix for this Adj-RIB Out route.
1.3.6.1.4.1.164.11.4.5.1.3ColumnbgpAdjRibOutPrefixnot-accessiblecurrentThe address prefix of this Adj-RIB Out route. The length is specified by bgpAdjRibOutPrefixLen. Any bits beyond the length specified by bgpAdjRibOutPrefixLen a…
1.3.6.1.4.1.164.11.4.5.1.4ColumnbgpAdjRibOutPrefixLennot-accessiblecurrentLength in bits of the address prefix contained in the bgpAdjRibOutPrefix object.
1.3.6.1.4.1.164.11.4.5.1.5ColumnbgpAdjRibOutAdvertStatusread-onlycurrentThis object indicates the current state of advertisement of the route to the peer. A value of advertised(1) indicates that the route has been advertised to the…
1.3.6.1.4.1.164.11.4.5.1.6ColumnbgpAdjRibOutASPathStrread-onlycurrentThis is a string containing the autonomous system path sent to this peer in the AS_PATH attribute for this Adj-RIB-Out route. If this path contains four-octet …
1.3.6.1.4.1.164.11.4.5.1.7ColumnbgpAdjRibOutNextHopread-onlycurrentThe next hop address transmitted in the UPDATE packet. The address family of this object is the same as that of bgpAdjRibOutPrfx.
1.3.6.1.4.1.164.11.4.5.1.8ColumnbgpAdjRibOutAsSizeread-onlycurrentWhether the bgpAdjRibOutASPathStr object contains two or four byte AS numbers.
1.3.6.1.4.1.164.11.4.5.1.9ColumnbgpAdjRibOutMultiExitDiscread-onlycurrentThis metric is used to discriminate between multiple exit points to an adjacent autonomous system. Valid only if bgpAdjRibOutMEDPrsnt is TRUE.
1.3.6.1.4.1.164.11.4.5.1.10ColumnbgpAdjRibOutLocalPrefread-onlycurrentThe local preference for this Adj-RIB-Out route, as transmitted in the UPDATE message sent to the peer.
1.3.6.1.4.1.164.11.4.5.1.11ColumnbgpAdjRibOutMEDPrsntread-onlycurrentIf true, then the route has an associated MED attribute, whose value is given in bgpAdjRibOutMultiExitDisc. If false, the route has no MED attribute, and the v…
1.3.6.1.4.1.164.11.4.6TablebgpNetworkTablenot-accessiblecurrentNetwork prefix to announce via BGP configuration table. This table allows a user to configure network prefixes to announce via BGP on a per AFI/SAFI basis.
1.3.6.1.4.1.164.11.4.6.1RowbgpNetworkEntrynot-accessiblecurrentNetwork prefix to announce via BGP configuration table entry.
1.3.6.1.4.1.164.11.4.6.1.1ColumnbgpNetworkAfiTypenot-accessiblecurrentThe AFI index into the network table.
1.3.6.1.4.1.164.11.4.6.1.2ColumnbgpNetworkSafinot-accessiblecurrentThe SAFI index into the network table.
1.3.6.1.4.1.164.11.4.6.1.3ColumnbgpNetworkAddrTypenot-accessiblecurrentThe type of the address used as the network prefix.
1.3.6.1.4.1.164.11.4.6.1.4ColumnbgpNetworkPrefixAddrnot-accessiblecurrentDestination IP address filter. Do not match the source routing information to this entry if one of these fails: - the destination IP address in the source rout…
1.3.6.1.4.1.164.11.4.6.1.5ColumnbgpNetworkPrefixLennot-accessiblecurrentDestination IP address filter prefix length (in bits). Do not match the source routing information to this entry if one of these fails: - the destination IP ad…
1.3.6.1.4.1.164.11.4.6.1.6ColumnbgpNetworkRowStatusread-createcurrentUsed to create and delete a network table entry to announce via BGP.
1.3.6.1.4.1.164.11.4.7TablebgpRouteMapTablenot-accessiblecurrentPolicy Rule BGP Table.
1.3.6.1.4.1.164.11.4.7.1RowbgpRouteMapEntrynot-accessiblecurrentBGP policy route map table (match criteria and set options)
1.3.6.1.4.1.164.11.4.7.1.1ColumnbgpRouteMapIndexnot-accessiblecurrentThe index of this bgpRouteMapEntry. This is the Index used by Neighbors to reference the Route Map. Route map indexes 0xFFnnnnnn, are reserved for representing…
1.3.6.1.4.1.164.11.4.7.1.2ColumnbgpRouteMapNumbernot-accessiblecurrentThe index of this bgpRouteMapEntry. This is a number used to reference more than one filter per route map index.
1.3.6.1.4.1.164.11.4.7.1.3ColumnbgpRouteMapTyperead-onlycurrentThe type of route map entry. This is only relevant for policy filtering route maps. It indicates the action which should apply to a route which matches the rou…
1.3.6.1.4.1.164.11.4.7.1.4ColumnbgpRouteMapMaCommread-createcurrentIf not representing one or more ORF entries this contains the regular expression to use when matching elements of the community list for a route. If representi…
1.3.6.1.4.1.164.11.4.7.1.5ColumnbgpRouteMapSeCommread-createcurrentContains the regular expression used when executing the action defined by bgpRouteMapSeCommAct. Allowed values depend on the value of bgpRouteMapSeCommAct - se…
1.3.6.1.4.1.164.11.4.7.1.6ColumnbgpRouteMapSeCommActread-createcurrentThe action to take on the community list if this route map matches the route. Note that if the action is AMB_BGP_SET_SPECIFIC or AMB_BGP_REMOVE_ALL_AND_SET, th…
1.3.6.1.4.1.164.11.4.7.1.7ColumnbgpRouteMapSeLocPrefread-createcurrentThe value to set the Local Pref to if there is a match. This value is only used if bgpRouteMapSeLocPrefDef is TRUE.
1.3.6.1.4.1.164.11.4.7.1.8ColumnbgpRouteMapSeLocPrefDefread-createcurrentWhether or not the value in bgpRouteMapSeLocPref should be used for updating attributes.
1.3.6.1.4.1.164.11.4.7.1.9ColumnbgpRouteMapSeMedread-createcurrentThe value to set the MED to if there is a match. A value of 0 indicates that the MED should be removed. This value is only used if bgpRouteMapSeMedDef is TRUE.
1.3.6.1.4.1.164.11.4.7.1.10ColumnbgpRouteMapSeMedDefread-createcurrentWhether or not the value in bgpRouteMapSeMed should be used for updating attributes.
1.3.6.1.4.1.164.11.4.7.1.11ColumnbgpRouteMapSeAsPrependCountread-createcurrentTo prepend AS numbers to the AS-Path, set bgpRouteMapSeAsPrependCount to the count of the AS numbers to prepend, set bgpRouteMapSeAsPrependSize to indicate whe…
1.3.6.1.4.1.164.11.4.7.1.12ColumnbgpRouteMapSeAsPrependSizeread-createcurrentThe size of AS numbers in the field bgpRouteMapSeAsPrependAsVals to prepend to the AS path if there is a match. This field is only used if bgpRouteMapSeAsPrepe…
1.3.6.1.4.1.164.11.4.7.1.13ColumnbgpRouteMapSeAsPrependAsValsread-createcurrentAn array containing the AS numbers to prepend to the AS path if there is a match. The length of each AS number is given by bgpRouteMapSeAsPrependSize. This fie…
1.3.6.1.4.1.164.11.4.7.1.14ColumnbgpRouteMapMaPrefixListNameread-createcurrentThe name of prefix-list profile that includes network prefixes to be matched in a route-map policy rule.
1.3.6.1.4.1.164.11.4.7.1.15ColumnbgpRouteMapMaAsExpread-createcurrentContains the regular expression to use when matching the AS-Path for a route. This is stored here in ASCII format. AS numbers are matched as decimal numbers. F…
1.3.6.1.4.1.164.11.4.8TablebgpIpPreTablenot-accessiblecurrentPolicy Rule BGP IP Prefix Table.
1.3.6.1.4.1.164.11.4.8.1RowbgpIpPreEntrynot-accessiblecurrentBGP policy IP prefix table
1.3.6.1.4.1.164.11.4.8.1.1ColumnbgpIpPreMatchnot-accessiblecurrentThe index of this bgpIpPreEntry. This decides what match command is used by the route map this list is tied to.
1.3.6.1.4.1.164.11.4.8.1.2ColumnbgpIpPreNumbernot-accessiblecurrentThe index of this bgpIpPreEntry. This number is used to reference more than one filter per route map index.
1.3.6.1.4.1.164.11.4.8.1.3ColumnbgpIpPreAfiread-writecurrentThe AFI of the address prefix.
1.3.6.1.4.1.164.11.4.8.1.4ColumnbgpIpPreSafiread-writecurrentThe SAFI of the address prefix.
1.3.6.1.4.1.164.11.4.8.1.5ColumnbgpIpPreAddrread-writecurrentThe Address part of the prefix.
1.3.6.1.4.1.164.11.4.8.1.6ColumnbgpIpPreLenread-writecurrentThe Length (in bits) part of the prefix (as in the 16 in a 128.128/16 prefix).
1.3.6.1.4.1.164.11.4.8.1.7ColumnbgpIpPreGeread-writecurrentThe GE value of the prefix. GE and LE allow the range of the prefix length to be matched on to be varied. The range is assumed to be from ge-value to the addre…
1.3.6.1.4.1.164.11.4.8.1.8ColumnbgpIpPreLeread-writecurrentThe LE value of the prefix. GE and LE allow the range of the prefix length to be matched on to be varied. The range is assumed to be from ge-value to the addre…
1.3.6.1.4.1.164.11.4.8.1.9ColumnbgpIpPreTyperead-writecurrentThe type of this prefix. This is only applicable if this prefix is linked to a route map with an ORF association and allows the entry to override the action of…
1.3.6.1.4.1.164.11.4.9TablebgpPolicyBindTablenot-accessiblecurrentBGP policy profile Bind to BGP peer, AFI, SAFI Entitity.
1.3.6.1.4.1.164.11.4.9.1RowbgpPolicyBindEntrynot-accessiblecurrentEntry defines BGP policy profile bind to BGP peer, AFI, SAFI entity
1.3.6.1.4.1.164.11.4.9.1.1ColumnbgpPolicyBindDirectionnot-accessiblecurrentThis object indicates the direction on which the bgp policy works, which may be either inbound (for traffic entering the entity) or outbound (for traffic trans…
1.3.6.1.4.1.164.11.4.9.1.2ColumnbgpPolicyBindTypenot-accessiblecurrentBGP policy profile type.
1.3.6.1.4.1.164.11.4.9.1.3ColumnbgpPolicyBindNumbernot-accessiblecurrentThe index of this bgp policy profile. This is a number used to reference more than one bgp policy profile per same peer-afi-safi-direction-type entity.
1.3.6.1.4.1.164.11.4.9.1.4ColumnbgpPolicyBindNameread-createcurrentThis object indicates the name of BGP policy profile bound to this entity.
1.3.6.1.4.1.164.11.4.9.1.5ColumnbgpPolicyBindClearStatisticsCmdread-createcurrentClear statistics command. All Matches counters (of all policy rules) of policy profile bound to entity are cleared.
1.3.6.1.4.1.164.11.4.9.1.6ColumnbgpPolicyBindRowStatusread-createcurrentCreate or delete BGP policy profile bind to entity
1.3.6.1.4.1.164.11.4.10TablebgpPolicyRuleStatsTablenot-accessiblecurrentStatistics table
1.3.6.1.4.1.164.11.4.10.1RowbgpPolicyRuleStatsEntrynot-accessiblecurrentStatistics entry
1.3.6.1.4.1.164.11.4.10.1.1ColumnbgpPolicyRuleStatsMatchesread-onlycurrentCounts the number of packets that matched a policy rule which is bound to specific peer, address family (afi) and sub address family (safi) with direction and …
1.3.6.1.4.1.164.11.4.10.1.2ColumnbgpPolicyRuleStatsClearCmdread-createcurrentClear statistics command. Rule Matches counter (bgpPolicyRuleStatsMatches) is cleared. Soft Clear option (3) is to update Policy without BGP session re-establi…
1.3.6.1.4.1.164.11.4.11NodebgpPathAttrExtensions
1.3.6.1.4.1.164.11.4.11.1TablebgpPathAttrCommTablenot-accessiblecurrentThe BGP-4 Path Attribute Community Table contains the per network path (NLRI) data on the community membership advertised with a route. The absence of row data…
1.3.6.1.4.1.164.11.4.11.1.1RowbgpPathAttrCommEntrynot-accessiblecurrentInformation about a community association provided with a path to a network.
1.3.6.1.4.1.164.11.4.11.1.1.1ColumnbgpPathAttrCommIndexnot-accessiblecurrentAn integer index for a row in this table.
1.3.6.1.4.1.164.11.4.11.1.1.2ColumnbgpPathAttrCommValueread-onlycurrentA value representing a community. There are certain 4-octet long values which could be returned in this columnar row data that carry additional semantics.
Type Definitions
NameSyntaxStatusDescription
BgpAsSizeINTEGER { twoOctet(1), fourOctet(2) }currentThe size of the AS number.
BgpAutonomousSystemNumberUnsigned32currentAn autonomous System Number. If bgpAsSize is two-octet, the range is 0..65535. If it is four-octet, it is the full range of Unsigned32.
BgpCapabilitiesBITS { reserved0(0), mpIpv4Unicast(1), mpIpv4Multicast(2), mpIpv4Vpn(3), reserved4(4), mpIpv6Unicast(5), mpIpv6Multicast(6), mpIpv6Vpn(7), reserved8(8), routeRefresh(9), gracefulRestart(10), routeRefreshCisco(11), outboundRouteFilter(12), outboundRouteFilterCisco(13), fourOctetAs(14) }currentThe capabilities advertised by a BGP instance.
BgpCommunityOCTET STRING (SIZE(4))currentThe representation of a BGP Community.
BgpCommunityActionINTEGER { none(0), removeAll(1), removeSpecific(2), setSpecific(3), removeAllAndSet(4) }currentHow to handle adding a community attribute.
BgpIdentifierOCTET STRING (SIZE (4))currentThe representation of a BGP Identifier.
BgpIpMatchTypeINTEGER { nlriAddr(1), sourceAddr(2), nextHopAddr(3) }currentThe type of match carried out by the route map for this IP prefix list.
BgpPeerStatesINTEGER { idle(1), connect(2), active(3), opensent(4), openconfirm(5), established(6) }currentThe current state of a connection to a BGP peer.
BgpPermitOrDenyINTEGER { permit(1), deny(2) }currentWhether the behavior is to permit or deny.
BgpSafiINTEGER { unicast(1), multicast(2), both(3), mplsBgpVpn(128) }currentThe representation of a BGP Safi (Sub-Address Family Identifier)
MIB Viewer