RAD-SubRtr-MIB
289 objects
Router MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.1.11.0.1 | NotificationrtrFACSViolation | current | The trap is sent for every violation of a FACS filter. | |
| 1.3.6.1.4.1.164.6.1.11.0.2 | NotificationrtrSwDwnLoadTrap | current | The trap is sent after the tftp download of the software and before the decompression and reset operations. | |
| 1.3.6.1.4.1.164.6.1.11.0.6 | NotificationipBfdDetectionTimeExpired | current | The trap alarm is sent when IP-BFD session detection Time has expired . | |
| 1.3.6.1.4.1.164.6.1.11.0.7 | NotificationipBfdNeighborShutdown | current | The trap event is sent when IP-BFD session was shut down by neighbor, meaning bfgSessXRemoteDiag=administrativelyDown(7) | |
| 1.3.6.1.4.1.164.6.1.11.0.8 | NotificationipBfdNeighborAddressChange | current | The trap is sent when IP-BFD session neighbor's IP Address was changed. | |
| 1.3.6.1.4.1.164.11 | IdentityradRouter | Router MIB. | ||
| 1.3.6.1.4.1.164.11.0 | NodertrEvents | |||
| 1.3.6.1.4.1.164.11.0.1 | NotificationsystemTraceMsgProtoMemAllocErr | current | Protocol Allocation Memory Error | |
| 1.3.6.1.4.1.164.11.1 | NodertrInterfaces | |||
| 1.3.6.1.4.1.164.11.1.1 | TablertrConfigIfTable | not-accessible | current | Table of configured interfaces. |
| 1.3.6.1.4.1.164.11.1.1.1 | RowrtrConfigIfEntry | not-accessible | current | Each entry defines a configured interface. |
| 1.3.6.1.4.1.164.11.1.1.1.1 | ColumnrtrConfigIfIndex | read-only | current | This variable uniquely identifies the interface. It is used as a cross reference in other system tables |
| 1.3.6.1.4.1.164.11.1.1.1.2 | ColumnrtrConfigIfType | read-create | current | This variable identifies the type of the specific entry in the rtrDynamicIfConfigTable. This field is writable only at creation time (i.e., when value of statu… |
| 1.3.6.1.4.1.164.11.1.1.1.3 | ColumnrtrConfigIfName | read-create | current | This variable provides a logical name to a specific entry in rtrConfigIfTable. It is also used in identifying the Driver interfaces. |
| 1.3.6.1.4.1.164.11.1.1.1.4 | ColumnrtrConfigIfStatus | read-create | current | The status of the ConfigEntry. The choices are those defined in SNMPv2-TC. Only: active, createAndWait, and destroy will be used. active - The conceptual row i… |
| 1.3.6.1.4.1.164.11.1.2 | TablertrIfCfgTable | not-accessible | current | Router Interface Configuration Table. |
| 1.3.6.1.4.1.164.11.1.2.1 | RowrtrIfCfgEntry | not-accessible | current | An entry in the Router Interface Configuration Table. |
| 1.3.6.1.4.1.164.11.1.2.1.1 | ColumnrtrIfCfgIndex | read-only | current | This object indicates the Router Interface Index. (In some cases it will be equal to the Router Interface ifIndex). |
| 1.3.6.1.4.1.164.11.1.2.1.2 | ColumnrtrIfCfgIpAddress | read-only | current | IP Address of the Router Interface. - original description - deprecated. For new applications, this object will be dummy index with constant value 0.0.0.0 . |
| 1.3.6.1.4.1.164.11.1.2.1.3 | ColumnrtrIfCfgRowStatus | read-create | current | This object enables the user to create/delete entries of this table. |
| 1.3.6.1.4.1.164.11.1.2.1.4 | ColumnrtrIfCfgIpMask | read-create | deprecated | IP Mask Address Router Interface. |
| 1.3.6.1.4.1.164.11.1.2.1.5 | ColumnrtrIfCfgIfIndex | read-create | current | ifIndex of the device interface connected to this Router Interface. |
| 1.3.6.1.4.1.164.11.1.2.1.6 | ColumnrtrIfCfgType | read-create | current | The Router Interface Type. By default it shall be notApplicabe(1). atm - ATM router interface lis - Logical IP Subnet router interface. ethernet - Ethernet rou… |
| 1.3.6.1.4.1.164.11.1.2.1.7 | ColumnrtrIfCfgVlanId | read-create | current | The VLAN ID assigned to Tagged frames transmitted from this Router Interface. The value inserted should be a defined VLAN. |
| 1.3.6.1.4.1.164.11.1.2.1.8 | ColumnrtrIfCfgMtu | read-create | current | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram… |
| 1.3.6.1.4.1.164.11.1.2.1.9 | ColumnrtrIfCfgName | read-create | current | The Router Interface Name. |
| 1.3.6.1.4.1.164.11.1.2.1.10 | ColumnrtrIfCfgConnectionPointer | read-create | current | This parameter represents the entity that is connected to this Router Interface. The value of this parameter is a pointer to an existing row of a table, where … |
| 1.3.6.1.4.1.164.11.1.2.1.11 | ColumnrtrIfCfgVlanTagging | read-create | current | The VLAN Tagging. |
| 1.3.6.1.4.1.164.11.1.2.1.12 | ColumnrtrIfCfgVlanPriority | read-create | current | The VLAN Priority. |
| 1.3.6.1.4.1.164.11.1.2.1.13 | ColumnrtrIfCfgParams | read-create | current | This object represents one or more parameters of the Router Interface. Each group of bits (one or more bits) represents a specific parameter and its possible v… |
| 1.3.6.1.4.1.164.11.1.2.1.14 | ColumnrtrIfCfgMngAccess | read-create | current | This object represents Management Access availability via this Router Interface. disable (2) - the access is disabled enable (3) - the access is enabled pingAl… |
| 1.3.6.1.4.1.164.11.1.2.1.15 | ColumnrtrIfCfgLlcSnapEncaps | read-create | current | This object represents the LLC/SNAP Encapsulation. |
| 1.3.6.1.4.1.164.11.1.2.1.16 | ColumnrtrIfCfgDhcp | read-create | current | This object indicates whether DHCP is enabled for this Router Interface. |
| 1.3.6.1.4.1.164.11.1.2.1.17 | ColumnrtrIfCfgIfIpAddressType | read-create | deprecated | This object indicates IP Address Type (v4, v6) of rtrIfIpAddress for this Router Interface. |
| 1.3.6.1.4.1.164.11.1.2.1.18 | ColumnrtrIfCfgIfIpAddress | read-create | deprecated | This object indicates IP address of this Router Interface. |
| 1.3.6.1.4.1.164.11.1.2.1.19 | ColumnrtrIfCfgICMPUnreachable | read-create | current | This object indicates whether sending ICMP Unreachable message is enabled for this Router Interface. |
| 1.3.6.1.4.1.164.11.1.2.1.20 | ColumnrtrIfCfgIpv6AutoConfig | read-create | current | This object determines whether IPv6 auto-configuration is enabled for this Router Interface. disable (2) - IPv6 auto-configuration is disabled enable (3) - IPv… |
| 1.3.6.1.4.1.164.11.1.2.1.26 | ColumnrtrIfCfgDhcpRelay | read-create | current | This object indicates whether DHCP Relay is enabled for this Router Interface. |
| 1.3.6.1.4.1.164.11.1.2.1.27 | ColumnrtrIfCfgDhcpv6ClientAdminStatus | read-create | current | This object defines the administrative status of DHCPv6 client for Router Interface. |
| 1.3.6.1.4.1.164.11.1.2.1.28 | ColumnrtrIfCfgIpForwarding | read-create | current | This object defines whether received traffic into specific interface is forwarded to other Router Interfaces or not. |
| 1.3.6.1.4.1.164.11.1.3 | TablertrStaticRouteTable | not-accessible | current | This entity's IP Routing table. |
| 1.3.6.1.4.1.164.11.1.3.1 | RowrtrStaticRouteEntry | not-accessible | current | A particular route to a particular destination, under a particular policy (as reflected in the rtrStaticRoutePolicy object). Dynamically created rows will surv… |
| 1.3.6.1.4.1.164.11.1.3.1.1 | ColumnrtrStaticRouteDestType | not-accessible | current | The type of the rtrStaticRouteDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are allowed … |
| 1.3.6.1.4.1.164.11.1.3.1.2 | ColumnrtrStaticRouteDest | not-accessible | current | The destination IP address of this route. The type of this address is determined by the value of the rtrStaticRouteDestType object. The values for the index ob… |
| 1.3.6.1.4.1.164.11.1.3.1.3 | ColumnrtrStaticRoutePfxLen | not-accessible | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the rtrStati… |
| 1.3.6.1.4.1.164.11.1.3.1.4 | ColumnrtrStaticRoutePolicy | not-accessible | current | This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to th… |
| 1.3.6.1.4.1.164.11.1.3.1.5 | ColumnrtrStaticRouteNextHopType | not-accessible | current | The type of the rtrStaticRouteNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those address t… |
| 1.3.6.1.4.1.164.11.1.3.1.6 | ColumnrtrStaticRouteNextHop | not-accessible | current | On remote routes, the address of the next system en route. For non-remote routes, a zero length string. The type of this address is determined by the value of … |
| 1.3.6.1.4.1.164.11.1.3.1.7 | ColumnrtrStaticRouteRtRIfIndex | read-create | current | This object is the Router IP Interface corresponding to rtrIfCfgEntry.rtrIfCfgIndex in opposite to the RFC4292 that define the object inetCidrRouteIfIndex - wh… |
| 1.3.6.1.4.1.164.11.1.3.1.8 | ColumnrtrStaticRouteType | read-only | current | The static Routing table shall have the type of route equal to remote(4) by default and cannot be changed by the user. Note that the other values are specified… |
| 1.3.6.1.4.1.164.11.1.3.1.9 | ColumnrtrStaticRouteProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.164.11.1.3.1.10 | ColumnrtrStaticRouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied, except throu… |
| 1.3.6.1.4.1.164.11.1.3.1.11 | ColumnrtrStaticRouteNextHopAS | read-create | current | The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's rtrStaticRouteProto… |
| 1.3.6.1.4.1.164.11.1.3.1.12 | ColumnrtrStaticRouteMetric1 | read-create | current | The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rtrStaticRouteProto va… |
| 1.3.6.1.4.1.164.11.1.3.1.13 | ColumnrtrStaticRouteMetric2 | read-create | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rtrStaticRouteProto v… |
| 1.3.6.1.4.1.164.11.1.3.1.14 | ColumnrtrStaticRouteMetric3 | read-create | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rtrStaticRouteProto v… |
| 1.3.6.1.4.1.164.11.1.3.1.15 | ColumnrtrStaticRouteMetric4 | read-create | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rtrStaticRouteProto v… |
| 1.3.6.1.4.1.164.11.1.3.1.16 | ColumnrtrStaticRouteMetric5 | read-create | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's rtrStaticRouteProto v… |
| 1.3.6.1.4.1.164.11.1.3.1.17 | ColumnrtrStaticRouteStatus | read-create | current | The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1). |
| 1.3.6.1.4.1.164.11.1.3.1.18 | ColumnrtrStaticRouteNoInstall | read-create | current | Static Route entry option to not install the route into forwarding table. |
| 1.3.6.1.4.1.164.11.1.4 | TableipIfStatsXTable | not-accessible | current | An Augment of RFC4293.ipIfStatsTable |
| 1.3.6.1.4.1.164.11.1.4.1 | RowipIfStatsXEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.11.1.4.1.1 | ColumnipIfStatsXClearStatisticsCmd | read-create | current | Indicates a user command to clear all counters in row. |
| 1.3.6.1.4.1.164.11.1.5 | TableipSystemStatsXTable | not-accessible | current | An Augment of RFC4293.ipSystemStatsTable |
| 1.3.6.1.4.1.164.11.1.5.1 | RowipSystemStatsXEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.11.1.5.1.1 | ColumnipSystemStatsXClearStatisticsCmd | read-create | current | Indicates a user command to clear all counters in row. |
| 1.3.6.1.4.1.164.11.1.5.1.2 | ColumnipSystemStatsXClearAllStatisticsCmd | read-create | current | Clear action to be performed on one of the router's componenet's Statistics, or on all router component statistics. |
| 1.3.6.1.4.1.164.11.1.7 | TableifIpAddressTable | not-accessible | current | This table associates IP Address to Router Interface. |
| 1.3.6.1.4.1.164.11.1.7.1 | RowifIpAddressEntry | not-accessible | current | An entry in the Table. |
| 1.3.6.1.4.1.164.11.1.7.1.1 | ColumnifIpAddressAddrType | not-accessible | current | The address type of IP Address associated to a Router Interface. |
| 1.3.6.1.4.1.164.11.1.7.1.2 | ColumnifIpAddressAddr | not-accessible | current | The IP address associated to the Router Interface. |
| 1.3.6.1.4.1.164.11.1.7.1.3 | ColumnifIpAddressPrefixLength | not-accessible | current | The prefix length associated with this prefix. |
| 1.3.6.1.4.1.164.11.1.7.1.4 | ColumnifIpAddressIfIndex | not-accessible | current | The ifIndex of the Router Interface to which the IP Address is associated. |
| 1.3.6.1.4.1.164.11.1.7.1.5 | ColumnifIpAddressRowStatus | read-create | current | The status of this conceptual row. This object allows creating and deleting rows in this table. |
| 1.3.6.1.4.1.164.11.1.7.1.6 | ColumnifIpAddressPrefix | read-only | current | Indicates a the Prefix of the configured Address. IP Address and Prefix must have the same type (IPv4/IPv6). The address type of this object is specified in ip… |
| 1.3.6.1.4.1.164.11.1.7.1.7 | ColumnifIpAddressOrigin | read-only | current | The Origin of the IP Address. manual (2) indicates that the address was manually configured to a specified address, e.g., by user configuration. dhcp (4) indic… |
| 1.3.6.1.4.1.164.11.1.8 | TablertrIfCfgBfdSessTable | not-accessible | current | The Router Interface BFD Session Table specifies information on BFD sessions attached to this Router Interface. |
| 1.3.6.1.4.1.164.11.1.8.1 | RowrtrIfCfgBfdSessEntry | not-accessible | current | The Router Interface BFD Session Table specifies information on BFD sessions attached to this Router Interface. |
| 1.3.6.1.4.1.164.11.1.8.1.1 | ColumnrtrIfCfgBfdSessDesiredMinTxInterval | read-create | current | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. The value of zero(0… |
| 1.3.6.1.4.1.164.11.1.8.1.2 | ColumnrtrIfCfgBfdSessReqMinRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. The value of zero(… |
| 1.3.6.1.4.1.164.11.1.8.1.3 | ColumnrtrIfCfgBfdSessDetectMult | read-create | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.4.1.164.11.2 | NodeipSpec | |||
| 1.3.6.1.4.1.164.11.2.1 | TablertrIpAddrTable | not-accessible | current | This table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects. |
| 1.3.6.1.4.1.164.11.2.1.1 | RowrtrIpAddrEntry | not-accessible | current | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.164.11.2.1.1.1 | ColumnrtrIpAdEntAddr | read-only | current | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.164.11.2.1.1.2 | ColumnrtrIpAdEntIfIndex | read-create | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.164.11.2.1.1.3 | ColumnrtrIpAdEntNetMask | read-create | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.164.11.2.1.1.4 | ColumnrtrIpAdEntForwardIpBroadcast | read-create | current | This variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net). |
| 1.3.6.1.4.1.164.11.2.1.1.5 | ColumnrtrIpAdEntBackupAddr | read-create | current | |
| 1.3.6.1.4.1.164.11.2.1.1.6 | ColumnrtrIpAdEntStatus | read-create | current | The Status variable is used to create and destroy a Ip Addresses. |
| 1.3.6.1.4.1.164.11.2.2 | NodeicmpSpec | |||
| 1.3.6.1.4.1.164.11.2.2.1 | ScalarrtrIcmpGenErrMsgEnable | read-write | current | This variable controlls the ability to generate ICMP error messages |
| 1.3.6.1.4.1.164.11.2.2.2 | TablertrIcmpRdTable | not-accessible | current | This table contains ICMP Router Discovery parameters configurated per IP interface. |
| 1.3.6.1.4.1.164.11.2.2.2.1 | RowrtrIcmpRdEntry | not-accessible | current | The ICMP parameters configurated for IP interface. |
| 1.3.6.1.4.1.164.11.2.2.2.1.1 | ColumnrtrIcmpRdIpAddr | read-only | current | The IP address to which this entry's information pertains. |
| 1.3.6.1.4.1.164.11.2.2.2.1.2 | ColumnrtrIcmpRdIpAdvertAddr | read-write | current | The IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast ad… |
| 1.3.6.1.4.1.164.11.2.2.2.1.3 | ColumnrtrIcmpRdMaxAdvertInterval | read-write | current | The maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 180… |
| 1.3.6.1.4.1.164.11.2.2.2.1.4 | ColumnrtrIcmpRdMinAdvertInterval | read-write | current | The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no grea… |
| 1.3.6.1.4.1.164.11.2.2.2.1.5 | ColumnrtrIcmpRdAdvertLifetime | read-write | current | The maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rtrIcmpRdMaxAdvertInterval and no greater than 900… |
| 1.3.6.1.4.1.164.11.2.2.2.1.6 | ColumnrtrIcmpRdAdvertise | read-write | current | A flag indicating whether or not the address is to be advertised. |
| 1.3.6.1.4.1.164.11.2.2.2.1.7 | ColumnrtrIcmpRdPreferenceLevel | read-write | current | The preferability of the address as a default router address, relative to other router addresses on the same subnet. |
| 1.3.6.1.4.1.164.11.2.2.2.1.8 | ColumnrtrIcmpRdEntStatus | read-write | current | Setting of any value to this object set values of all fields to the default values. |
| 1.3.6.1.4.1.164.11.2.3 | Noderip2Spec | |||
| 1.3.6.1.4.1.164.11.2.3.1 | TablertrRip2IfConfTable | not-accessible | current | This table is an extension of rip2IfConfTable (RFC 1724 ,RIP 2). It means that every time somebody creates/destroys a row in the rip2IfConfTable, the same row … |
| 1.3.6.1.4.1.164.11.2.3.1.1 | RowrtrRip2IfConfEntry | not-accessible | current | An entry in table rtrRip2IfConfTable. |
| 1.3.6.1.4.1.164.11.2.3.1.1.1 | ColumnrtrRip2IfConfAddress | read-only | current | The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for… |
| 1.3.6.1.4.1.164.11.2.3.1.1.2 | ColumnrtrRip2IfConfVirtualDis | read-write | deprecated | This variable defines the virtual number of hops assigned to the interface specified by rtrIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm. |
| 1.3.6.1.4.1.164.11.2.3.1.1.3 | ColumnrtrRip2IfConfAutoSend | read-write | deprecated | When set to enable only the default route is sent through the interface. When set to disable, regular RIPs are sent. |
| 1.3.6.1.4.1.164.11.2.3.1.1.4 | ColumnrtrRip2IfConfRipEnable | read-write | current | This object shows whether RIP Protocol is enabled on the current interface. |
| 1.3.6.1.4.1.164.11.2.4 | NodearpSpec | |||
| 1.3.6.1.4.1.164.11.2.4.1 | ScalarrtrArpDeleteTable | read-write | current | Setting this object to any not-null value has the effect of deleting all entries of the ARP table. |
| 1.3.6.1.4.1.164.11.2.4.2 | ScalarrtrArpInactiveTimeOut | read-write | current | This variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the … |
| 1.3.6.1.4.1.164.11.2.4.3 | ScalarrtrArpProxy | read-write | current | When ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router … |
| 1.3.6.1.4.1.164.11.2.5 | NodertrNat | |||
| 1.3.6.1.4.1.164.11.2.5.1 | TablertrNatIfConfTable | not-accessible | current | A list of interfaces which require separate NAT configuration. |
| 1.3.6.1.4.1.164.11.2.5.1.1 | RowrtrNatIfConfEntry | not-accessible | current | A single routing domain in a single subnet. |
| 1.3.6.1.4.1.164.11.2.5.1.1.1 | ColumnrtrNatIfVirtualAddress | read-only | current | The IP Address of the virtual subnet to be translated by the 'NAT box' attached to this interface. For some devices/cases, it might represent the Virtual Lowes… |
| 1.3.6.1.4.1.164.11.2.5.1.1.2 | ColumnrtrNatIfVirtualMask | read-only | current | The subnet Mask of the virtual subnet. For some devices/cases, it might represent the Virtual Highest IP Address. |
| 1.3.6.1.4.1.164.11.2.5.1.1.3 | ColumnrtrNatIfConfStatus | read-create | current | Writing 'destroy' has the effect of deleting this interface. |
| 1.3.6.1.4.1.164.11.2.5.1.1.4 | ColumnrtrNatIfRealAddress | read-create | current | The IP Address of the real subnet which is used by 'NAT box' for translation. For some devices/cases, it might represent the Real Lowest IP Address. |
| 1.3.6.1.4.1.164.11.2.5.1.1.5 | ColumnrtrNatIfRealMask | read-create | current | The subnet Mask of the real subnet. For some devices/cases, it might represent the Real Highest IP Address. |
| 1.3.6.1.4.1.164.11.2.5.1.1.6 | ColumnrtrNatIfType | read-create | current | NAT type. static - Translate a specific virtual IP network to a specific real IP network. TCP, UDP and ICMP sessions originated both in real and virtual networ… |
| 1.3.6.1.4.1.164.11.2.5.2 | TablertrPatTable | not-accessible | current | Port Address Translation (PAT - single IP NAT) configuration Table. |
| 1.3.6.1.4.1.164.11.2.5.2.1 | RowrtrPatEntry | not-accessible | current | Each entry describe unique mapping between real IP address, range of ports and protocol, to local (virtual) IP address. Ports are used in the TCP (rfc793) to n… |
| 1.3.6.1.4.1.164.11.2.5.2.1.1 | ColumnrtrPatIdx | read-only | current | Running index for PAT table. |
| 1.3.6.1.4.1.164.11.2.5.2.1.2 | ColumnrtrPatRealAddress | read-create | current | The real IP Address used for translation |
| 1.3.6.1.4.1.164.11.2.5.2.1.3 | ColumnrtrPatVirtualAddress | read-create | current | The virtual IP Address used for translation |
| 1.3.6.1.4.1.164.11.2.5.2.1.4 | ColumnrtrPatLowestPort | read-create | current | Lowest Port number for this PAT entry |
| 1.3.6.1.4.1.164.11.2.5.2.1.5 | ColumnrtrPatHighestPort | read-create | current | Highest Port number for this PAT entry |
| 1.3.6.1.4.1.164.11.2.5.2.1.6 | ColumnrtrPatProtocol | read-create | current | Protocol selected. This Protocol and port range (lowest port - highest port) define the application (FTP, Telnet, SMTP etc.). Protocol enumaration numbers corr… |
| 1.3.6.1.4.1.164.11.2.5.2.1.7 | ColumnrtrPatStatus | read-create | current | This object enables creating and deleting entries of the table. |
| 1.3.6.1.4.1.164.11.3 | TablertrInformationTable | not-accessible | current | This table traces the agent fatal error. |
| 1.3.6.1.4.1.164.11.3.1 | RowrtrInformationEntry | not-accessible | current | This table has a single row entry and provides Information related to the last reboot. |
| 1.3.6.1.4.1.164.11.3.1.1 | ColumnrtrInformationId | not-accessible | current | rtrInformationId =1 |
| 1.3.6.1.4.1.164.11.3.1.2 | ColumnrtrInformationProtMemAllocStatus | read-only | current | Protocol Memory Allocation Alarm Status. |
| 1.3.6.1.4.1.164.11.3.1.3 | ColumnrtrInformationProtMemAllocInfo | read-only | current | Protocol Memory Allocation Alarm additional information. |
| 1.3.6.1.4.1.164.11.5 | NodertrFACS | |||
| 1.3.6.1.4.1.164.11.5.1 | ScalarrtrFACSDefaultAction | read-write | current | Used to define the default action for the device, when no FACS statements applicable to a given frame are defined. |
| 1.3.6.1.4.1.164.11.5.2 | TablertrFACSActTable | not-accessible | current | The table of FACS action. |
| 1.3.6.1.4.1.164.11.5.2.1 | RowrtrFACSActEntry | not-accessible | current | Each rtrFACSActEntry consist of the following parameters |
| 1.3.6.1.4.1.164.11.5.2.1.1 | ColumnrtrFACSActType | read-only | current | This parameter indicates on which FACS Table the FACS action will preform. |
| 1.3.6.1.4.1.164.11.5.2.1.2 | ColumnrtrFACSActIfIndex | read-only | current | The interface to which this FACS entry is applicable. |
| 1.3.6.1.4.1.164.11.5.2.1.3 | ColumnrtrFACSAction | read-write | current | The management station that sends a SET request for one of these actions with indexes rtrFACSType and rtrFACSIfIndex defines the type and the interface Id for … |
| 1.3.6.1.4.1.164.11.5.2.1.4 | ColumnrtrFACSActiveDB | read-write | current | This parameter will point on which Facs DataBase the SNMP agent read. The Active dataBase is Read Only. The user may change FACS statements in the temporary Da… |
| 1.3.6.1.4.1.164.11.5.3 | TablertrFACSTable | not-accessible | current | The table of FACS statment. |
| 1.3.6.1.4.1.164.11.5.3.1 | RowrtrFACSEntry | not-accessible | current | Each FACS statment consists of the following parameters |
| 1.3.6.1.4.1.164.11.5.3.1.1 | ColumnrtrFACSIfIndex | read-only | current | The interface to which this FACS entry is applicable. For applications this variables is always 0. |
| 1.3.6.1.4.1.164.11.5.3.1.2 | ColumnrtrFACSProtocolType | read-only | current | This parameter define the protocol the Security Access Control is applicable. |
| 1.3.6.1.4.1.164.11.5.3.1.3 | ColumnrtrFACSType | read-only | current | The Mode of in which this FACS statement operates. For applications this variable is always rx(2). |
| 1.3.6.1.4.1.164.11.5.3.1.4 | ColumnrtrFACSIndex | read-only | current | Index to the FACS Table. |
| 1.3.6.1.4.1.164.11.5.3.1.5 | ColumnrtrFACSSrcAdd | read-write | current | The size of the octet string will be according to the protocol type defined in rtrFACSProtocolType. |
| 1.3.6.1.4.1.164.11.5.3.1.6 | ColumnrtrFACSSrcAddMask | read-write | current | Source-address mask . |
| 1.3.6.1.4.1.164.11.5.3.1.7 | ColumnrtrFACSDesAdd | read-write | current | Destination-address The size of the octet string will be according to the protocol type define in rtrFACSProtocolType . |
| 1.3.6.1.4.1.164.11.5.3.1.8 | ColumnrtrFACSDesAddMask | read-write | current | Destination-address mask . |
| 1.3.6.1.4.1.164.11.5.3.1.9 | ColumnrtrFACSOperation | read-write | current | ... . |
| 1.3.6.1.4.1.164.11.5.3.1.10 | ColumnrtrFACSNetFiltering | read-write | current | ... . |
| 1.3.6.1.4.1.164.11.5.3.1.11 | ColumnrtrFACSSocketNum | read-write | current | Port/socket number for different applications 0 is default meaning not applicable. none(1), ftp(21), telnet(23), smtp(25), tftp(69), snmp(161), snmpTrap(162), … |
| 1.3.6.1.4.1.164.11.5.3.1.12 | ColumnrtrFACSMask1Id | read-write | current | Index into RND mask table FACS/COD Type) . |
| 1.3.6.1.4.1.164.11.5.3.1.13 | ColumnrtrFACSMask2Id | read-write | current | Index into RND mask table FACS/COD according to the value of rtrFACSType . |
| 1.3.6.1.4.1.164.11.5.3.1.14 | ColumnrtrFACSStatus | read-write | current | The status of a table entry. |
| 1.3.6.1.4.1.164.11.5.4 | ScalarrtrFACSFrameData | read-only | current | Data from the frame that violated a FACS Filter. |
| 1.3.6.1.4.1.164.11.6 | TablertrRtmEntityTable | not-accessible | current | The table of RTM entities. |
| 1.3.6.1.4.1.164.11.6.1 | RowrtrRtmEntityEntry | not-accessible | current | Each entry represents an instance of the RTM entity. |
| 1.3.6.1.4.1.164.11.6.1.1 | ColumnrtrRtmEntityAfiType | not-accessible | current | The AFI index of the rtrRtmEntityTable. |
| 1.3.6.1.4.1.164.11.6.1.2 | ColumnrtrRtmEntitySafi | not-accessible | current | The SAFI index of the rtrRtmEntityTable. |
| 1.3.6.1.4.1.164.11.6.1.3 | ColumnrtrRtmEntityDsStatDf | read-create | current | The default administrative distance used for statically defined routes in the static routes MIB table. It can be overridden for individual static routes. The l… |
| 1.3.6.1.4.1.164.11.6.1.4 | ColumnrtrRtmEntityDsOspfInt | read-create | current | The administrative distance used for OSPF internal routes. The lower the distance for a given type of route, the more likely a route of this type is to be used… |
| 1.3.6.1.4.1.164.11.6.1.5 | ColumnrtrRtmEntityDsOspfExt | read-create | current | The administrative distance used for OSPF Autonomous System external routes. The lower the distance for a given type of route, the more likely a route of this … |
| 1.3.6.1.4.1.164.11.6.1.6 | ColumnrtrRtmEntityDsIntBgp | read-create | current | The administrative distance used for internal and VPN BGP routes. The lower the distance for a given type of route, the more likely a route of this type is to … |
| 1.3.6.1.4.1.164.11.6.1.7 | ColumnrtrRtmEntityDsExtBgp | read-create | current | The administrative distance used for external BGP routes. The lower the distance for a given type of route, the more likely a route of this type is to be used … |
| 1.3.6.1.4.1.164.11.7.1 | TablertrBridgePortConfigTable | not-accessible | current | Table of the bridge ports |
| 1.3.6.1.4.1.164.11.7.1.1 | RowrtrBridgePortConfigEntry | not-accessible | current | Each entry defines a bridge port |
| 1.3.6.1.4.1.164.11.7.1.1.1 | ColumnrtrBridgePortCIndex | read-only | current | This is the index of the bridge port. It is the same as 'dot1dBasePort' of the Bridge MIB. |
| 1.3.6.1.4.1.164.11.7.1.1.2 | ColumnrtrBridgePortCIf | read-create | current | The config ifIndex the bridge port is sitting on. |
| 1.3.6.1.4.1.164.11.7.1.1.3 | ColumnrtrBridgePortCStatus | read-create | current | The status of the RtrBridgePortConfigEntry. Creating and destroying the bridge port is done by this variable. |
| 1.3.6.1.4.1.164.11.9 | NoderadRouterConfig | |||
| 1.3.6.1.4.1.164.11.9.1 | TablertrConfigTable | not-accessible | current | The Router's Configuration table. |
| 1.3.6.1.4.1.164.11.9.1.1 | RowrtrConfigEntry | not-accessible | current | An entry in the Router's Configuration table. |
| 1.3.6.1.4.1.164.11.9.1.1.1 | ColumnrtrConfigIndex | read-only | current | This object indicates the Router's Index. |
| 1.3.6.1.4.1.164.11.9.1.1.2 | ColumnrtrConfigDefaultGateway | read-create | current | Router Default Gateway. |
| 1.3.6.1.4.1.164.11.9.1.1.3 | ColumnrtrConfigArpAgingTime | read-create | current | ARP Aging Time. |
| 1.3.6.1.4.1.164.11.9.1.1.5 | ColumnrtrConfigClassifierTosMask | read-create | current | This object indicates the Classifier's TOS Mask, as follows: 0x1C for DTR 0x1E for Cisco 0xE0 for Precedence 0xFC for Diffserv Else for Manual . |
| 1.3.6.1.4.1.164.11.9.1.1.6 | ColumnrtrConfigRIPMode | read-create | current | This object determines the Router Information Protocol to measure the shortest path between 2 positions on the network. |
| 1.3.6.1.4.1.164.11.9.1.1.7 | ColumnrtrConfigRoutingName | read-create | current | The unique name given to a specific virtual Router instance. |
| 1.3.6.1.4.1.164.11.9.1.1.8 | ColumnrtrConfigRowStatus | read-create | current | This object enables creating and deleting rows in table. |
| 1.3.6.1.4.1.164.11.9.1.1.9 | ColumnrtrConfigDhcpClientOpHostNameType | read-create | current | DHCP Host Name type according to option 12 This parameters holds the type of the name. (the name itself is set in dhcpClientOpHostName). 0 - user-configured id… |
| 1.3.6.1.4.1.164.11.9.1.1.10 | ColumnrtrConfigDhcpClientOpHostName | read-create | current | The DHCP Host Name. Name should include at least 1 character. |
| 1.3.6.1.4.1.164.11.9.1.1.11 | ColumnrtrConfigDhcpClientOpVendorClassIdType | read-create | current | DHCP Vendor ClassId type This parameters holds the type of the name. (the name itself is set in dhcpClientOpVendorClassId). 0 - user-configured identifier 1 - … |
| 1.3.6.1.4.1.164.11.9.1.1.12 | ColumnrtrConfigDhcpClientOpVendorClassId | read-create | current | The Vendor Class Identifier. Identifier should include at least 1 character. |
| 1.3.6.1.4.1.164.11.9.1.1.13 | ColumnrtrConfigDhcpClientOpControl | read-create | current | The Administrative Status of the different options. Bit=1 means that respective option is enabled/activated. |
| 1.3.6.1.4.1.164.11.9.1.1.14 | ColumnrtrConfigClearIpv4ArpCmd | read-create | current | Clear action to be performed on IPv4 ARP Table associate to the Router. |
| 1.3.6.1.4.1.164.11.9.1.1.15 | ColumnrtrConfigClearIpv6NeighborCmd | read-create | current | Clear action to be performed on IPv6 Neighbor Table associate to the Router. |
| 1.3.6.1.4.1.164.11.9.1.1.16 | ColumnrtrConfigRouterDscp | read-create | current | The DSCP value of any packet generated in the related Router Entity. Router Entity traffic includes control protocols. |
| 1.3.6.1.4.1.164.11.9.2 | ScalarrtrSystemAddress | read-write | current | This object represents the System Address. |
| 1.3.6.1.4.1.164.11.9.3 | TablertrFwdTable | not-accessible | current | The Router's Forwarding Table. |
| 1.3.6.1.4.1.164.11.9.3.1 | RowrtrFwdEntry | not-accessible | current | An entry in the Router's Forwarding table. |
| 1.3.6.1.4.1.164.11.9.3.1.1 | ColumnrtrFwdIdx | read-only | current | This object indicates the Router Index. |
| 1.3.6.1.4.1.164.11.9.3.1.2 | ColumnrtrFwdIpAddress | read-only | current | This object indicates the Destination IP Address. |
| 1.3.6.1.4.1.164.11.9.3.1.3 | ColumnrtrFwdIpMask | read-only | current | This object indicates the Mask IP address. |
| 1.3.6.1.4.1.164.11.9.3.1.4 | ColumnrtrFwdRuleIdx | read-only | current | This object indicates the Rule's Number. |
| 1.3.6.1.4.1.164.11.9.3.1.5 | ColumnrtrFwdRowStatus | read-create | current | This object enables the user to create/delete entries in this table. Entry of Type rtrFwdType = staticRouting(3) are created by the user. Only this type of ent… |
| 1.3.6.1.4.1.164.11.9.3.1.6 | ColumnrtrFwdNextHop | read-create | current | This object indicates the IP Address of the Next Hop. |
| 1.3.6.1.4.1.164.11.9.3.1.7 | ColumnrtrFwdIfIndex | read-only | current | This object indicates the Interface Index. |
| 1.3.6.1.4.1.164.11.9.3.1.8 | ColumnrtrFwdType | read-create | current | The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is … |
| 1.3.6.1.4.1.164.11.9.3.1.9 | ColumnrtrFwdProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.164.11.9.3.1.10 | ColumnrtrFwdEthQueue | read-create | current | This object indicates the ETH Queue number. |
| 1.3.6.1.4.1.164.11.9.3.1.11 | ColumnrtrFwdMetric1 | read-create | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtrFwdProto value. If t… |
| 1.3.6.1.4.1.164.11.9.4 | TablertrPbrTable | not-accessible | current | The Router's Forwarding Table. |
| 1.3.6.1.4.1.164.11.9.4.1 | RowrtrPbrEntry | not-accessible | current | An entry in the Router's Policy Based Routing (PBR) table. |
| 1.3.6.1.4.1.164.11.9.4.1.1 | ColumnrtrPbrIdx | not-accessible | current | This object indicates the Router Index. |
| 1.3.6.1.4.1.164.11.9.4.1.2 | ColumnrtrPbrInterface | not-accessible | current | Router interface for which this match-set rule applies. |
| 1.3.6.1.4.1.164.11.9.4.1.3 | ColumnrtrPbrRuleIdx | not-accessible | current | This object indicates the Policy Based Routing (PBR) match-set rule index. |
| 1.3.6.1.4.1.164.11.9.4.1.4 | ColumnrtrPbrRowStatus | read-create | current | This object enables the user to create/delete entries of this table. |
| 1.3.6.1.4.1.164.11.9.4.1.5 | ColumnrtrPbrMatchAllFrames | read-create | current | Forwarding decision is made regardless PBR Rule (as if all conditions are matched) |
| 1.3.6.1.4.1.164.11.9.4.1.6 | ColumnrtrPbrSourceIpAddress | read-create | current | Received frame source IP Address. |
| 1.3.6.1.4.1.164.11.9.4.1.7 | ColumnrtrPbrSourceIpMask | read-create | current | The subnet mask of the source IP Address. |
| 1.3.6.1.4.1.164.11.9.4.1.8 | ColumnrtrPbrDestIpAddress | read-create | current | Received frame destination IP Address. |
| 1.3.6.1.4.1.164.11.9.4.1.9 | ColumnrtrPbrDestIpMask | read-create | current | The subnet mask of the destination IP Address. |
| 1.3.6.1.4.1.164.11.9.4.1.10 | ColumnrtrPbrIpProtocol | read-create | current | Value of Protocol field in IP Frame header. |
| 1.3.6.1.4.1.164.11.9.4.1.11 | ColumnrtrPbrMinFrameLength | read-create | current | . |
| 1.3.6.1.4.1.164.11.9.4.1.12 | ColumnrtrPbrMaxFrameLength | read-create | current | . |
| 1.3.6.1.4.1.164.11.9.4.1.13 | ColumnrtrPbrDiscardFrame | read-create | current | Discard a frame when rule is matched . |
| 1.3.6.1.4.1.164.11.9.4.1.14 | ColumnrtrPbrForwardingInterface | read-create | current | The router Interface through which the frame should be forwarded, when rule is matched. If there's no forwarding interface, then this object has a value of zero |
| 1.3.6.1.4.1.164.11.9.4.1.15 | ColumnrtrPbrNextHop | read-create | current | IP Address of Next Hop, when Forwarding Interface is LAN, or has BridgePDU (BVI) encapsulation. |
| 1.3.6.1.4.1.164.11.9.6 | TablertrSourceAddressTable | not-accessible | current | The Source Address Table. |
| 1.3.6.1.4.1.164.11.9.6.1 | RowrtrSourceAddressEntry | not-accessible | current | An entry in the Source Address Table. |
| 1.3.6.1.4.1.164.11.9.6.1.1 | ColumnrtrSourceAddressApp | not-accessible | current | This object indicates the Application Type. |
| 1.3.6.1.4.1.164.11.9.6.1.2 | ColumnrtrSourceAddressType | not-accessible | current | This object indicates the Address Type. Value of 'unknown(0)' means that address is irrelevant. |
| 1.3.6.1.4.1.164.11.9.6.1.3 | ColumnrtrSourceAddress | not-accessible | current | This object indicates the Address. Value of '0' means that address is irrelevant. |
| 1.3.6.1.4.1.164.11.9.6.1.4 | ColumnrtrSourceAddressIfIndex | not-accessible | current | This object indicates the ifIndex of the Interface, whose address will be used. Value of '0' means that ifIndex is irrelevant. |
| 1.3.6.1.4.1.164.11.9.6.1.5 | ColumnrtrSourceAddressRowStatus | read-create | current | This object enables the user to create/delete entries in this table. |
| 1.3.6.1.4.1.164.11.9.7 | TablertrRedistTable | not-accessible | current | The table of rtr redistribution information entries. This table is used to determine how routing information is redistributed to routing protocol managers (RPM… |
| 1.3.6.1.4.1.164.11.9.7.1 | RowrtrRedistEntry | not-accessible | current | Information defining how routing information is redistributed to routing protocol managers (RPMs)by rtr on its Routing Protocol Input interface. There are two … |
| 1.3.6.1.4.1.164.11.9.7.1.1 | ColumnrtrRedistAfiType | not-accessible | current | The AFI index into the rtr redistribute table. |
| 1.3.6.1.4.1.164.11.9.7.1.2 | ColumnrtrRedistSafi | not-accessible | current | The SAFI index into the rtr redistribute table. |
| 1.3.6.1.4.1.164.11.9.7.1.3 | ColumnrtrRedistInfoSrc | not-accessible | current | The source of the routing information. This is one of: - an RPM, joined to rtr on the Routing Protocol Input interface - statically defined routes, defined in … |
| 1.3.6.1.4.1.164.11.9.7.1.4 | ColumnrtrRedistInfoDest | not-accessible | current | The destination of the routing information. This is usually an RPM, joined to rtr on the Routing Protocol Input interface. It can also be set to 'all', meaning… |
| 1.3.6.1.4.1.164.11.9.7.1.5 | ColumnrtrRedistRowStatus | read-create | current | Used to create and delete a rtr redistribution table entry. |
| 1.3.6.1.4.1.164.11.13 | NodertrPolicy | |||
| 1.3.6.1.4.1.164.11.13.1 | TablertrPolicyMainTable | not-accessible | current | Router Policy Configuration Table. |
| 1.3.6.1.4.1.164.11.13.1.1 | RowrtrPolicyMainEntry | not-accessible | current | An entry in the Router Policy main table |
| 1.3.6.1.4.1.164.11.13.1.1.1 | ColumnrtrPolicyName | not-accessible | current | Router Policy profile name |
| 1.3.6.1.4.1.164.11.13.1.1.2 | ColumnrtrPolicyNumberOfRules | read-only | current | Number of policy rule entries in this policy profile |
| 1.3.6.1.4.1.164.11.13.1.1.3 | ColumnrtrPolicyLastSeqeunceNumber | read-only | current | Sequence Number of the last Rule in this policy profile. |
| 1.3.6.1.4.1.164.11.13.1.1.4 | ColumnrtrPolicyResequenceCmd | read-create | current | Resequence Command, specifying step between policy rule sequence numbers. For example, when resequence command with value of 100 is given, new sequence number … |
| 1.3.6.1.4.1.164.11.13.1.1.5 | ColumnrtrPolicyType | read-create | current | Router Policy profile type. |
| 1.3.6.1.4.1.164.11.13.1.1.6 | ColumnrtrPolicyRowStatus | read-create | current | Create/Destroy Router Policy profile. When removing policy profile which has associated policy rule entries, all associated entries (in rtrPolicyRuleTable and … |
| 1.3.6.1.4.1.164.11.13.2 | TablertrPolicyRuleTable | not-accessible | current | Router policy rule Table |
| 1.3.6.1.4.1.164.11.13.2.1 | RowrtrPolicyRuleEntry | not-accessible | current | Policy rule entry - general policy rule parameters , and pointer to Auxillary table. |
| 1.3.6.1.4.1.164.11.13.2.1.1 | ColumnrtrPolicyRuleIdx | not-accessible | current | Policy rule running Index . |
| 1.3.6.1.4.1.164.11.13.2.1.2 | ColumnrtrPolicyRuleName | read-create | current | The name of the policy profile to which this policy rule belongs. Policy profile Name MUST exists in rtrPolicyMainTable. Upon deletion of an policy profile, al… |
| 1.3.6.1.4.1.164.11.13.2.1.3 | ColumnrtrPolicyRuleSequenceNumber | read-create | current | Policy rule Sequence Number |
| 1.3.6.1.4.1.164.11.13.2.1.4 | ColumnrtrPolicyRuleType | read-create | current | This object specify policy rule type: Remark, Deny or Permit. Remark type policy rule must include pointer (rtrPolicyRulePointer) to rtrPolicyRuleRemarkTable P… |
| 1.3.6.1.4.1.164.11.13.2.1.5 | ColumnrtrPolicyRulePointer | read-create | current | Pointer to entry in one of the auxilary tables: bgp route map table. When an entry is created in this table, Agent must create associated entry in one of the a… |
| 1.3.6.1.4.1.164.11.13.2.1.6 | ColumnrtrPolicyRuleRowStatus | read-create | current | Create or Destroy router policy rule |
| 1.3.6.1.4.1.164.11.13.3 | TablertrPolicyInvRuleTable | not-accessible | current | Inverse table for Policy Rule Table. This table is used for displaying policy rules ordered according their sequence number. |
| 1.3.6.1.4.1.164.11.13.3.1 | RowrtrPolicyInvRuleEntry | not-accessible | current | Policy Rule Table inverse entry - general Policy Rule parameters, indexed by policy profile Name and Sequence Number, used for display sorted according to sequ… |
| 1.3.6.1.4.1.164.11.13.3.1.1 | ColumnrtrPolicyInvRuleIdx | read-only | current | Policy Rule running Index . |
| 1.3.6.1.4.1.164.11.13.3.1.2 | ColumnrtrPolicyInvRuleType | read-only | current | This object specify policy rule type: Remark, Deny or Permit. Remark type policy rule must include pointer (rtrPolicyRulePointer) to rtrPolicyRuleRemarkTable P… |
| 1.3.6.1.4.1.164.11.13.3.1.3 | ColumnrtrPolicyInvRulePointer | read-only | current | Pointer to entry in one of the auxilary tables: bgp route map table. |
| 1.3.6.1.4.1.164.11.13.4 | TablertrPolicyRuleRemarkTable | not-accessible | current | Policy Rules remark Table. This table containing all remarks (free text which may describe Policy Rules) for all Policy Profiles |
| 1.3.6.1.4.1.164.11.13.4.1 | RowrtrPolicyRuleRemarkEntry | not-accessible | current | Policy Rules remarks |
| 1.3.6.1.4.1.164.11.13.4.1.1 | ColumnrtrPolicyRuleRemark | read-create | current | Free text describing following Policy Rules |
| 1.3.6.1.4.1.164.11.15 | NodertrDhcp | |||
| 1.3.6.1.4.1.164.11.15.1 | NodertrDhcpRelay | |||
| 1.3.6.1.4.1.164.11.15.1.2 | TabledhcpRelayServerTable | not-accessible | current | DHCP Relay Server Table. |
| 1.3.6.1.4.1.164.11.15.1.2.1 | RowdhcpRelayServerEntry | not-accessible | current | An entry in the DHCP Relay Server Table. |
| 1.3.6.1.4.1.164.11.15.1.2.1.1 | ColumndhcpRelayServerRtrIfIndex | not-accessible | current | The ifIndex of the Router Interface to which the DHCP Relay Server is associated. Value of 0x00000001 represents a server definition per router entity, serving… |
| 1.3.6.1.4.1.164.11.15.1.2.1.2 | ColumndhcpRelayServerAddrType | not-accessible | current | The address type of IP Address associated to the DHCP Relay Server. |
| 1.3.6.1.4.1.164.11.15.1.2.1.3 | ColumndhcpRelayServerAddr | not-accessible | current | The IP address associated to the DHCP Relay Server. |
| 1.3.6.1.4.1.164.11.15.1.2.1.4 | ColumndhcpRelayServerRowStatus | read-create | current | This object enables the user to create/delete entries of this table. |
| 1.3.6.1.4.1.164.11.16 | NodertrRouterEntity | |||
| 1.3.6.1.4.1.164.11.16.1 | TablertrRibTable | not-accessible | current | Router entity RIB (Routing Information Base) table. |
| 1.3.6.1.4.1.164.11.16.1.1 | RowrtrRibEntry | not-accessible | current | Route entry in Router entity RIB table. |
| 1.3.6.1.4.1.164.11.16.1.1.1 | ColumnrtrRibDestType | not-accessible | current | The type of the address used as the destination IP address for this route. |
| 1.3.6.1.4.1.164.11.16.1.1.2 | ColumnrtrRibDest | not-accessible | current | Destination internetwork address or subnet address. The destination prefix length is applied to this value, and to a particular destination address, to determi… |
| 1.3.6.1.4.1.164.11.16.1.1.3 | ColumnrtrRibDestLen | not-accessible | current | Prefix length (in bits) to apply to the rtmRibDest object, to obtain the set of addresses to which this route applies. If the prefix length is L, then applying… |
| 1.3.6.1.4.1.164.11.16.1.1.4 | ColumnrtrRibTos | not-accessible | current | The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specif… |
| 1.3.6.1.4.1.164.11.16.1.1.5 | ColumnrtrRibNextHopType | not-accessible | current | The type of the address used as the next-hop address for this route. |
| 1.3.6.1.4.1.164.11.16.1.1.6 | ColumnrtrRibNextHop | not-accessible | current | On remote routes, the address of the next system en route; Otherwise, zero. |
| 1.3.6.1.4.1.164.11.16.1.1.7 | ColumnrtrRibIfIndex | not-accessible | current | The ifIndex value which identifies the local interface through which the next hop of this route should be reached. |
| 1.3.6.1.4.1.164.11.16.1.1.8 | ColumnrtrRibProto | not-accessible | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.164.11.16.1.1.9 | ColumnrtrRibRpmIndex | not-accessible | current | The HAF entity index for the RPM that supplied this route, or zero for static routes or automatically configured routes. This is used to distinguish routes in … |
| 1.3.6.1.4.1.164.11.16.1.1.10 | ColumnrtrRibMetric1 | read-only | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtmRibProto value. If t… |
| 1.3.6.1.4.1.164.11.16.1.1.11 | ColumnrtrRibFibRoute | read-only | current | Flag indicating whether or not this route has been programmed either to a forwarding table, or to a partner that queries route information (such as BGP or PIM)… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdminDistance | Integer32 (0..255) | current | The adminstrative distance used in prioritizing routes from different sources when selecting active routes in RTM. The active route is chosen from those available routes which have the lowest associated administrative d… |
| InfoSourceDest | INTEGER { infoSourceAll(0), infoSourceAllInclConnected(1), infoSourceOther(65536), infoSourceConnected(131072), infoSourceStatic(196608), infoSourceIcmp(262144), infoSourceEgp(327680), infoSourceGgp(393216), infoSourceHello(458752), infoSourceRip(524288), infoSourceIsis(589824), infoSourceEsis(655360), infoSourceIgrp(720896), infoSourceBbnSpfIgp(786432), infoSourceOspf(851968), infoSourceBgp(917504), infoSourceIdpr(983040), infoSourceEigrp(1048576), infoSourceDvmrp(1114112), infoSourceDdrp(1179648) } | current | A source of, or destination for, routing information. These values are used when redistributing routing information. |
| RtrIfConfigTYPE | INTEGER { other(1), ethernetLan(6), iso88023Csmacd(7), tokenRingLan(9), fddi(15), basicISDN(20), primaryISDN(21), propPointToPoint(22), slip(28), ppp(23), frameRelay(32), rs232(33), atm(37), x25ple(40), v35(45), fastEther(62), fastEtherFX(69), virtualNet(500), cod(1001), backUp(1002), dialUp(1004), b1isdn(1010), b2isdn(1011), ipBcst(1020), ipPtp(1021), ipxRaw(1022), ipxEtType(1023), ipxLlcSap(1024), ipxLlcSnap(1025), ipxPtp(1026), brgUnder(1027), wanDriver(1060), ethernetDriver(1061), tokenRingDriver(1062), fddiDriver (1064), virtualLan(1080), unknown(1100) } | current | This type defines what type of sub-layer is used in each entr of rtrDynamicIfConfigTable. It should contain values from IANAifType type for standard sub-layer, and values (starting from 999 decimal) for private sub-laye… |
| RtrSafi | INTEGER { unicast(1), multicast(2), both(3), mplsBgpVpn(128) } | current | The representation of a Router Safi (Sub-Address Family Identifier) |