RAD-TEST-MIB
448 objects
Test MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.6.1.15 | IdentityradTest | Test MIB. | ||
| 1.3.6.1.4.1.164.6.1.15.0 | NoderadTestPrefRepEvents | |||
| 1.3.6.1.4.1.164.6.1.15.0.2 | NotificationsystemRfc2544TestStart | current | This Trap Indicates that the test was started. The Test Id (tstNePerfRepTestId) shall be taken from the tstNePerfRepTestType OID. | |
| 1.3.6.1.4.1.164.6.1.15.0.3 | NotificationsystemRfc2544TestEnd | current | This Trap Indicates that the test was ended. The Test Id (tstNePerfRepTestId) shall be taken from the tstNePerfRepTestType OID. | |
| 1.3.6.1.4.1.164.6.1.15.0.4 | NotificationsystemItuSatTestStart | current | This trap indicates that a Y.1564 test was started. The generator ID (ituSatGeneratorIndex) shall be taken from the ituSatGeneratorStatus OID. | |
| 1.3.6.1.4.1.164.6.1.15.0.5 | NotificationsystemItuSatConfigurationTestEnd | current | This trap indicates that a Y.1564 configuration test has ended. The generator ID (ituSatGeneratorIndex) shall be taken from the ituSatGeneratorConfResult OID. | |
| 1.3.6.1.4.1.164.6.1.15.0.6 | NotificationsystemItuSatPerformanceTestEnd | current | This trap indicates that a Y.1564 performance test has ended. The generator ID (ituSatGeneratorIndex) shall be taken from the ituSatGeneratorPerfResult OID. | |
| 1.3.6.1.4.1.164.6.1.15.0.7 | NotificationsystemItuSatResponderActivated | current | This trap indicates that a Y.1564 responder was activated. The responder ID (ituSatResponderIndex) shall be taken from the ituSatResponderStatus OID. | |
| 1.3.6.1.4.1.164.6.1.15.0.8 | NotificationsystemItuSatResponderDeactivated | current | This trap indicates that a Y.1564 responder was deactivated (either by the operator or by the device due to external conditions). The responder ID (ituSatRespo… | |
| 1.3.6.1.4.1.164.6.1.15.0.9 | NotificationtwampPeerTestStarted | current | This event indicates that a test started. | |
| 1.3.6.1.4.1.164.6.1.15.0.10 | NotificationtwampPeerTestStopped | current | This event indicates that a test stopped. | |
| 1.3.6.1.4.1.164.6.1.15.0.11 | NotificationtwampSessionLossRatioTca | current | This event indicates a Loss Ratio threshold crossing alert. | |
| 1.3.6.1.4.1.164.6.1.15.0.12 | NotificationtwampSessionDelayTca | current | This event indicates a delay threshold crossing alert. | |
| 1.3.6.1.4.1.164.6.1.15.0.13 | NotificationtwampSessionDelayVarTca | current | This event indicates a delay variation threshold crossing alert. | |
| 1.3.6.1.4.1.164.6.1.15.0.14 | NotificationtwampSessionUnavailable | current | This alarm indicates that TWAMP session is unavailable. TWAMP session is considered as unavailable when last Rollup Period has more than 75% packet loss ratio.… | |
| 1.3.6.1.4.1.164.6.1.15.0.15 | NotificationtwampSessionForwardUnavailable | current | This alarm indicates that TWAMP session is unavailable in the forward direction. TWAMP session is considered as unavailable when last Rollup Period has more th… | |
| 1.3.6.1.4.1.164.6.1.15.0.16 | NotificationtwampSessionBackwardUnavailable | current | This alarm indicates that TWAMP session is unavailable in the backward direction. TWAMP session is considered as unavailable when last Rollup Period has more t… | |
| 1.3.6.1.4.1.164.6.1.15.0.17 | NotificationtwampSessionForwardLossRatioTca | current | This event indicates a Loss Ratio threshold crossing alert in the forward direction. | |
| 1.3.6.1.4.1.164.6.1.15.0.18 | NotificationtwampSessionForwardDelayTca | current | This event indicates a delay threshold crossing alert in the forward direction. | |
| 1.3.6.1.4.1.164.6.1.15.0.19 | NotificationtwampSessionForwardDelayVarTca | current | This event indicates a delay variation threshold crossing alert in the Forward direction. | |
| 1.3.6.1.4.1.164.6.1.15.0.20 | NotificationtwampSessionBackwardLossRatioTca | current | This event indicates a Loss Ratio threshold crossing alert in the backward direction. | |
| 1.3.6.1.4.1.164.6.1.15.0.21 | NotificationtwampSessionBackwardDelayTca | current | This event indicates a delay threshold crossing alert in the backward direction. | |
| 1.3.6.1.4.1.164.6.1.15.0.22 | NotificationtwampSessionBackwardDelayVarTca | current | This event indicates a delay variation threshold crossing alert in the backward direction. | |
| 1.3.6.1.4.1.164.6.1.15.0.37 | NotificationtwampPeerTodAccuracyOutOfLimit | current | This alarm indicates that TWAMP responder TOD is out of sync. TWAMP peer is considered as 'responder TOD out of sync' when a controller get out-of-sync indicat… | |
| 1.3.6.1.4.1.164.6.1.15.1 | NoderadTestPrefRepProfile | |||
| 1.3.6.1.4.1.164.6.1.15.1.1 | TabletstNePerfRepProfileTable | not-accessible | current | This table includes the profiles for 'Test Network Element Performance'. |
| 1.3.6.1.4.1.164.6.1.15.1.1.1 | RowtstNePerfRepProfileEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.1 | ColumntstNePerfRepProfileId | not-accessible | current | The profile ID index |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.2 | ColumntstNePerfRepProfileName | read-create | current | The profile Name |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.3 | ColumntstNePerfRepProfileRowStatus | read-create | current | This object enables creation and deletion of Profiles |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.4 | ColumntstNePerfRepProfileFrameSize | read-create | current | Frame size in Bytes units. |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.5 | ColumntstNePerfRepProfilePattern | read-create | current | The pattern at the test frame payload. |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.6 | ColumntstNePerfRepProfileDirection | read-create | current | The direction of the test |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.7 | ColumntstNePerfRepProfileTlv | read-create | current | The type of date to test. test - The NE shall check if the frame exist data - The NE shall check the frames was damaged. |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.8 | ColumntstNePerfRepProfileNumberOfFramesInOneBurst | read-create | current | The number of frames that shall be send in one burst. |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.9 | ColumntstNePerfRepProfileFrameLossTolerance | read-create | current | Frame Loss Tolerance in thousandth (1/1000) |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.10 | ColumntstNePerfRepProfileBinarySearchResolution | read-create | current | Binary Search Resolution in thousandth (1/1000) the minimal step in the binary search (for throughput test) |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.11 | ColumntstNePerfRepProfileNumberOfTrials | read-create | current | Number of repetition of the test |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.12 | ColumntstNePerfRepProfileLearningFramesMode | read-create | current | Learning Frames Mode |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.13 | ColumntstNePerfRepProfileLearningFrames | read-create | current | Number of learning frames |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.14 | ColumntstNePerfRepProfileCustomSize | read-create | current | A user configurable frame size to be used in the tests. Relevant only when the scustom (13) bit is set to tstNePerfRepProfileFrameSize. |
| 1.3.6.1.4.1.164.6.1.15.1.1.1.15 | ColumntstNePerfRepProfileTransmitLck | read-create | current | This Object determines whether Lock indication will be sent in user direction during the test. |
| 1.3.6.1.4.1.164.6.1.15.1.2 | TabletstMepFlowTable | not-accessible | current | This is an helping table that defines the flows that are associated to a MEP having same MEP's classification characteristics. |
| 1.3.6.1.4.1.164.6.1.15.1.2.1 | RowtstMepFlowEntry | not-accessible | current | The agent is creating entries in this table. |
| 1.3.6.1.4.1.164.6.1.15.1.2.1.1 | ColumntstMepFlowIndex | not-accessible | current | A running index. |
| 1.3.6.1.4.1.164.6.1.15.1.2.1.2 | ColumntstMepFlowFlowIdx | read-only | current | This attribute defines a unique Flow. The value points to MEF-R.flowIdx1 and MEF-R.flowIdx2 indices. |
| 1.3.6.1.4.1.164.6.1.15.1.3 | TableituSatProfileTable | not-accessible | current | This table contains configuration profiles to be used in Y.1564 tests. In general a profile is suitable for both generators and responders, however a few attri… |
| 1.3.6.1.4.1.164.6.1.15.1.3.1 | RowituSatProfileEntry | not-accessible | current | An entry in Y.1564 profile table. A row cannot be deleted if the profile is associated to a test. A row cannot be modified if the profile is associated to a te… |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.1 | ColumnituSatProfileIndex | not-accessible | current | A unique number as profile identifier. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.2 | ColumnituSatProfileName | read-create | current | A meaningful printable profile name. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.3 | ColumnituSatProfileRowStatus | read-create | current | This object enables creation and deletion of profiles. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.4 | ColumnituSatProfileEtherType | read-create | current | The EtherType of the test frames. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.5 | ColumnituSatProfileFrameSize | read-create | current | The size of test frames. This size refers to the total number of bytes in the frame including the header and trailer of the frame but excluding the tag structu… |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.6 | ColumnituSatProfileUniFlrThreshold | read-create | current | The service acceptance criteria for unidirectional Frame Loss Ratio. This object is relevant only for generators. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.7 | ColumnituSatProfileUniFtdThreshold | read-create | current | The service acceptance criteria for unidirectional Frame Transfer Delay. This object is relevant only for generators. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.8 | ColumnituSatProfileUniFdvThreshold | read-create | current | The service acceptance criteria for unidirectional Frame Delay Variation. This object is relevant only for generators. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.9 | ColumnituSatProfileUniAvailThreshold | read-create | current | The service acceptance criteria for unidirectional Availability. This object is relevant only for generators. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.10 | ColumnituSatProfileBiFlrThreshold | read-create | current | The service acceptance criteria for bidirectional Frame Loss Ratio. This object is relevant only for generators. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.11 | ColumnituSatProfileBiFtdThreshold | read-create | current | The service acceptance criteria for bidirectional Frame Transfer Delay. This object is relevant only for generators. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.12 | ColumnituSatProfileBiFdvThreshold | read-create | current | The service acceptance criteria for bidirectional Frame Delay Variation. This object is relevant only for generators. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.13 | ColumnituSatProfileBiAvailThreshold | read-create | current | The service acceptance criteria for bidirectional Availability. This object is relevant only for generators. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.14 | ColumnituSatProfileScope | read-create | current | The scope of the test: configuration test, performance test, or both phases. This object is relevant only for generators. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.15 | ColumnituSatProfileDirection | read-create | current | The direction in which the test is performed. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.16 | ColumnituSatProfileColorMode | read-create | current | The color mode that is used for the test. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.17 | ColumnituSatProfileTrafficPolicing | read-create | current | Allows to include or exclude the traffic policing sub-test from the configuration phase. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.18 | ColumnituSatProfileCirSteps | read-create | current | The transmission rate in each step of the CIR sub-test, configurable as percentage of CIR. The last transmission rate must be 100% CIR therefore only up to 3 a… |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.19 | ColumnituSatProfileConfDuration | read-create | current | The duration of the configuration test. This duration is used for each tested P-bit. This object is relevant only for generators. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.20 | ColumnituSatProfilePerfDuration | read-create | current | The duration of the performance test. This object is relevant only for generators. |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.21 | ColumnituSatProfileRateConvention | read-create | current | Indicates whether rate measurements are be shown in the test report as 'data-rate' (IR) or converted to 'line rate' (ULR). This object is relevant only for gen… |
| 1.3.6.1.4.1.164.6.1.15.1.3.1.22 | ColumnituSatProfileResponderType | read-create | current | The type of the responder. This object is relevant only for generators. |
| 1.3.6.1.4.1.164.6.1.15.1.4 | TableituSatProfilePbitTable | not-accessible | current | This table contains configuration profiles, at the P-bit level, to be used in Y.1564 tests. The values in a row of this table override the values of the corres… |
| 1.3.6.1.4.1.164.6.1.15.1.4.1 | RowituSatProfilePbitEntry | not-accessible | current | An entry in Y.1564 profile P-bit table. When a row is created, the ituSatProfileIndex must point to an already existing row of ituSatProfileTable. A row cannot… |
| 1.3.6.1.4.1.164.6.1.15.1.4.1.1 | ColumnituSatProfilePbitIndex | not-accessible | current | A single P-bit to which the configuration in this table applies. |
| 1.3.6.1.4.1.164.6.1.15.1.4.1.2 | ColumnituSatProfilePbitRowStatus | read-create | current | This object enables creation and deletion of P-bit profiles. |
| 1.3.6.1.4.1.164.6.1.15.1.4.1.3 | ColumnituSatProfilePbitFrameSize | read-create | current | The size of test frames. This size refers to the total number of bytes in the frame including the header and trailer of the frame but excluding the tag structu… |
| 1.3.6.1.4.1.164.6.1.15.1.4.1.4 | ColumnituSatProfilePbitUniFlrThreshold | read-create | current | The service acceptance criteria for unidirectional Frame Loss Ratio. |
| 1.3.6.1.4.1.164.6.1.15.1.4.1.5 | ColumnituSatProfilePbitUniFtdThreshold | read-create | current | The service acceptance criteria for unidirectional Frame Transfer Delay. |
| 1.3.6.1.4.1.164.6.1.15.1.4.1.6 | ColumnituSatProfilePbitUniFdvThreshold | read-create | current | The service acceptance criteria for unidirectional Frame Delay Variation. |
| 1.3.6.1.4.1.164.6.1.15.1.4.1.7 | ColumnituSatProfilePbitUniAvailThreshold | read-create | current | The service acceptance criteria for unidirectional Availability. |
| 1.3.6.1.4.1.164.6.1.15.1.4.1.8 | ColumnituSatProfilePbitBiFlrThreshold | read-create | current | The service acceptance criteria for bidirectional Frame Loss Ratio. |
| 1.3.6.1.4.1.164.6.1.15.1.4.1.9 | ColumnituSatProfilePbitBiFtdThreshold | read-create | current | The service acceptance criteria for bidirectional Frame Transfer Delay. |
| 1.3.6.1.4.1.164.6.1.15.1.4.1.10 | ColumnituSatProfilePbitBiFdvThreshold | read-create | current | The service acceptance criteria for bidirectional Frame Delay Variation. |
| 1.3.6.1.4.1.164.6.1.15.1.4.1.11 | ColumnituSatProfilePbitBiAvailThreshold | read-create | current | The service acceptance criteria for bidirectional Availability. |
| 1.3.6.1.4.1.164.6.1.15.1.5 | TabletwampTestProfileTable | not-accessible | current | This table includes the profiles for TWAMP test sessions. |
| 1.3.6.1.4.1.164.6.1.15.1.5.1 | RowtwampTestProfileEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.1.5.1.1 | ColumntwampTestProfileId | not-accessible | current | A unique number as test profile identifier. |
| 1.3.6.1.4.1.164.6.1.15.1.5.1.2 | ColumntwampTestProfileRowStatus | read-create | current | This object enables creation and deletion of Profiles. |
| 1.3.6.1.4.1.164.6.1.15.1.5.1.3 | ColumntwampTestProfileName | read-create | current | The profile Name and the profile index. |
| 1.3.6.1.4.1.164.6.1.15.1.5.1.4 | ColumntwampTestProfilePayloadLength | read-create | current | Test session packets payload size in Bytes units. |
| 1.3.6.1.4.1.164.6.1.15.1.5.1.5 | ColumntwampTestProfileTxRate | read-create | current | Test session packets transmit rate in PPS. |
| 1.3.6.1.4.1.164.6.1.15.1.5.1.6 | ColumntwampTestProfileLossTimeout | read-create | current | Test session loss timeout in micro-sec. |
| 1.3.6.1.4.1.164.6.1.15.1.5.1.7 | ColumntwampTestProfileLossRatioThreshold | read-create | current | Test session loss timeout in PPM. |
| 1.3.6.1.4.1.164.6.1.15.1.5.1.8 | ColumntwampTestProfileDelayThreshold | read-create | current | Test session delay threshold loss in micro-sec. |
| 1.3.6.1.4.1.164.6.1.15.1.5.1.9 | ColumntwampTestProfileDelayVarThreshold | read-create | current | Test session delay thresholdloss in micro-sec. |
| 1.3.6.1.4.1.164.6.1.15.1.5.1.10 | ColumntwampTestProfileDelayVarEventType | read-create | current | Delay variation event type to define on which metric the delay threshold will be operated. Event options: pdvMax - pdv value. ipdvMax - ipdv max value. |
| 1.3.6.1.4.1.164.6.1.15.2 | NoderadTestPrefRepTest | |||
| 1.3.6.1.4.1.164.6.1.15.2.1 | TabletstNePerfRepTestTable | not-accessible | current | This table contains configuration for RFC2544 tests. |
| 1.3.6.1.4.1.164.6.1.15.2.1.1 | RowtstNePerfRepTestEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.1 | ColumntstNePerfRepTestId | not-accessible | current | The Test ID |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.2 | ColumntstNePerfRepTestRowStatus | read-create | current | This object enables creation and deletion of entries. |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.3 | ColumntstNePerfRepTestType | read-create | current | The type of the test. |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.4 | ColumntstNePerfRepTestProfileId | read-create | current | The index of the test Profile. |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.5 | ColumntstNePerfRepTestEntity | read-create | current | The OID number of the fifth index from ethOamDestNeTable that the test shall run on. |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.6 | ColumntstNePerfRepTestActivation | read-create | current | The cmd to run the test. The test can be activate in future time using the parameter dateAndTime (3) or daily (4). |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.7 | ColumntstNePerfRepTestStatus | read-only | current | The current status of the test: adminOff - Canceled by the user. inProgress - The test is in progress. pending - The test will be run according to the dateAndT… |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.8 | ColumntstNePerfRepTestActivationDateAndTime | read-create | current | Date And Time in which Test will be carried. |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.9 | ColumntstNePerfRepTestActivationRecurrenceTime | read-create | current | Time of Day in which test will be recurrence. Date fields (Year/Month/Date) may be discarded |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.10 | ColumntstNePerfRepTestMaxRate | read-create | current | The maximal theoretical FPS (Frames per second) for this run, set by the user to reflect the limitation on this Channel. |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.11 | ColumntstNePerfRepTestElapsedTime | read-only | current | The number of hundredths of seconds that have elapsed since the beginning of the Test. |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.12 | ColumntstNePerfRepTestResetResults | read-create | current | Reset all test's iteration results. |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.13 | ColumntstNePerfRepTestRateConvention | read-create | current | Indicates whether the tstNePerfRepTestMaxRate is expressed in line-rate or in data-rate. Default value is dataRate(3). |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.14 | ColumntstNePerfRepTestFrameCompensation | read-create | current | The number of bytes to add to the actual transmitted frame size. This addition is not taken into consideration in the throughput bit rate result. Default value… |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.15 | ColumntstNePerfRepTestMaxTestDuration | read-create | current | An upper limit to the test duration in minutes. |
| 1.3.6.1.4.1.164.6.1.15.2.1.1.16 | ColumntstNePerfRepTestAssociatedFlow | read-create | current | The OID number of the 2 indexes of the flow associated with the test. The BW profile and QoS of this flow is taken into account in the test. Default value is z… |
| 1.3.6.1.4.1.164.6.1.15.2.2 | TableituSatGeneratorTable | not-accessible | current | This table contains a list of generator entities used in Y.1564 tests. The table allows creation, configuration and activation of test sessions. For each test … |
| 1.3.6.1.4.1.164.6.1.15.2.2.1 | RowituSatGeneratorEntry | not-accessible | current | An entry in Y.1564 generator table. A row cannot be modified or deleted while the test is running (indicated by ituSatGeneratorStatus = inProgress(3)). When a … |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.1 | ColumnituSatGeneratorIndex | not-accessible | current | A unique number as generator identifier. |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.2 | ColumnituSatGeneratorName | read-create | current | A meaningful printable generator name. |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.3 | ColumnituSatGeneratorRowStatus | read-create | current | This object enables creation and deletion of Y.1564 generators. |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.4 | ColumnituSatGeneratorServicePointer | read-create | current | The service under test. The service can be represented by: 1. An MA that contains one or more MEPs 2. A single multi-CoS flow 3. Mutiple single-CoS flows 4. Se… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.5 | ColumnituSatGeneratorProvisionedPbits | read-create | current | A list of the P-bit values that are requested to be tested. When no P-bits where specified all the P-bits that were pre-configured for the service are tested (… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.6 | ColumnituSatGeneratorProfile | read-create | current | The profile used in the test. |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.7 | ColumnituSatGeneratorCmd | read-create | current | A command to activate or de-activate the test at the generator side. If sanity checks prevent the test activation then a set to start(1) shall be rejected with… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.8 | ColumnituSatGeneratorConfChanged | read-only | current | Indication whether the configuration of the test was changed after the test was completed. If the configuration was changed then threshold values should not be… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.9 | ColumnituSatGeneratorStatus | read-only | current | The current status of the test (generator): Idle - some of the mandatory attributes were not configured yet. Ready - all the mandatory configurations were done… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.10 | ColumnituSatGeneratorTimeRemaining | read-only | current | The time remaining till the end of the test. If the test is not in progress a value of zero is returned. |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.11 | ColumnituSatGeneratorCurrentPhase | read-only | current | The current phase of the test. If the test is not in progress the value idle(1) is returned. |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.12 | ColumnituSatGeneratorDestination | read-only | current | A MAC address that identifies the responder side. Is equal to the provisioned destination when the value of ituSatGeneratorProvisionedDestination is not zero. … |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.13 | ColumnituSatGeneratorSource | read-only | current | The MAC address of the local MEP. If the MAC is unknown a value of '000000000000'H is returned. |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.14 | ColumnituSatGeneratorInnerTag | read-only | current | The value of the inner VLAN (usually C-Tag). If there is no inner tag or its value is not known, a value of zero is returned. |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.15 | ColumnituSatGeneratorOuterTag | read-only | current | The value of the outer VLAN (usually S-Tag). If there is no outer tag or its value is not known, a value of zero is returned. |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.16 | ColumnituSatGeneratorTestedPbits | read-only | current | A list of the P-bit values that were actually tested. For untagged EVC a value of zero is returned. If the P-bit values are not known a value of zero is return… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.17 | ColumnituSatGeneratorStartTime | read-only | current | The date and time at the last test activation. If the test was never activated a null value is returned. |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.18 | ColumnituSatGeneratorEndTime | read-only | current | The date and time when the last test was ended (regardless of the end result passed/failed/aborted). If the test is in progress or was never activated a null v… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.19 | ColumnituSatGeneratorTimeElapsed | read-only | current | For an in progress test - the elapsed time of the current test. For a completed test - the duration of the last test. If the test was never activated a zero va… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.20 | ColumnituSatGeneratorConfResult | read-only | current | The result of the last configuration test. The value notApplicable(1) is returned in the following cases: - The configuration test was not performed in the las… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.21 | ColumnituSatGeneratorPerfResult | read-only | current | The result of the last performance test. The value notApplicable(1) is returned in the following cases: - The performance test was not performed in the last te… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.22 | ColumnituSatGeneratorConfDuration | read-only | current | The duration of the configuration test. This object is a copy of the corresponding object in the profile. The duplication is done to keep the report valid even… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.23 | ColumnituSatGeneratorPerfDuration | read-only | current | The duration of the performance test. This object is a copy of the corresponding object in the profile and is used for availability calculation. The duplicatio… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.24 | ColumnituSatGeneratorScope | read-only | current | The scope of the test: configuration test, performance test, or both phases. This object is a copy of the corresponding object in the profile. The duplication … |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.25 | ColumnituSatGeneratorServiceBinding | read-create | current | The method used to associate the EVC to the test. The EVC can be represented by: 1. An MA that contains one or more MEPs 2. A single multi-CoS flow 3. Mutiple … |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.26 | ColumnituSatGeneratorServiceName | read-create | current | The name of the tested service. The combined values of this object, the ituSatGeneratorEgressPort and ituSatGeneratorProvisionedPbits are used to find the corr… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.27 | ColumnituSatGeneratorEgressPort | read-create | current | The physical or logical port through which the tested service is transmitted towards the network. The combined values of this object, the ituSatGeneratorServic… |
| 1.3.6.1.4.1.164.6.1.15.2.2.1.28 | ColumnituSatGeneratorProvisionedDestination | read-create | current | A configurable MAC address that identifies the responder side. Either this object or ituSatGeneratorRemoteMep may be set to a value different than zero, but no… |
| 1.3.6.1.4.1.164.6.1.15.2.3 | TableituSatGeneratorFlowTable | not-accessible | current | This table contains information about pre-configured flows and MEPs that are used by each Y.1564 generator. |
| 1.3.6.1.4.1.164.6.1.15.2.3.1 | RowituSatGeneratorFlowEntry | not-accessible | current | An entry in Y.1564 generator flow table. Rows are automatically created when the status of the corresponding generator in the ituSatGeneratorTable changes to r… |
| 1.3.6.1.4.1.164.6.1.15.2.3.1.1 | ColumnituSatGeneratorFlowPbitIndex | not-accessible | current | This index allows to show flow/MEP per P-bit. One entry for each set P-bit in the ituSatGeneratorTestedPbits. If the ituSatGeneratorTestedPbits is zero i.e. un… |
| 1.3.6.1.4.1.164.6.1.15.2.3.1.2 | ColumnituSatGeneratorFlowNameTx | read-only | current | The name of the egress flow. |
| 1.3.6.1.4.1.164.6.1.15.2.3.1.3 | ColumnituSatGeneratorFlowNameRx | read-only | current | The name of the ingress flow. |
| 1.3.6.1.4.1.164.6.1.15.2.3.1.4 | ColumnituSatGeneratorFlowCir | read-only | current | The Committed Information Rate provisioned for the egress flow. The value is taken from the associated bandwith profile. |
| 1.3.6.1.4.1.164.6.1.15.2.3.1.5 | ColumnituSatGeneratorFlowEir | read-only | current | The Excessive Information Rate provisioned for the egress flow. The value is taken from the associated bandwith profile. |
| 1.3.6.1.4.1.164.6.1.15.2.3.1.6 | ColumnituSatGeneratorFlowAssociatedMEP | read-only | current | The identifier of the MEP that is associated with the generator and specific P-bit. |
| 1.3.6.1.4.1.164.6.1.15.2.3.1.7 | ColumnituSatGeneratorFlowAssociatedService | read-only | current | The identifier of the service that is associated with the generator and specific P-bit. A value of zero is reserved for the case of automatic CoS completion. |
| 1.3.6.1.4.1.164.6.1.15.2.3.1.8 | ColumnituSatGeneratorFlowBwpInUse | read-only | current | Indicates what is the origin of the associated bandwidth profile for the EVC.CoS. |
| 1.3.6.1.4.1.164.6.1.15.2.4 | TableituSatResponderTable | not-accessible | current | This table contains a list of responder entities used in Y.1564 tests. The table allows creation, configuration and activation of test responders. |
| 1.3.6.1.4.1.164.6.1.15.2.4.1 | RowituSatResponderEntry | not-accessible | current | An entry in Y.1564 responder table. A row cannot be modified while the test is enabled (indicated by ituSatResponderStatus = inProgress(3)). When a row is dele… |
| 1.3.6.1.4.1.164.6.1.15.2.4.1.1 | ColumnituSatResponderIndex | not-accessible | current | A unique number as responder identifier. |
| 1.3.6.1.4.1.164.6.1.15.2.4.1.2 | ColumnituSatResponderName | read-create | current | A meaningful printable responder name. |
| 1.3.6.1.4.1.164.6.1.15.2.4.1.3 | ColumnituSatResponderRowStatus | read-create | current | This object enables creation and deletion of Y.1564 responders. |
| 1.3.6.1.4.1.164.6.1.15.2.4.1.4 | ColumnituSatResponderServicePointer | read-create | current | The service under test. The service can be represented by: 1. An MA that contains one or more MEPs 2. A single multi-CoS flow 3. Mutiple single-CoS flows 4. Se… |
| 1.3.6.1.4.1.164.6.1.15.2.4.1.5 | ColumnituSatResponderProfile | read-create | current | The profile used in the test. |
| 1.3.6.1.4.1.164.6.1.15.2.4.1.6 | ColumnituSatResponderCmd | read-create | current | A command to activate or de-activate the test at the responder side. If sanity checks prevent the test activation then a set to start(1) shall be rejected with… |
| 1.3.6.1.4.1.164.6.1.15.2.4.1.7 | ColumnituSatResponderStatus | read-only | current | The current status of the test (responder): Idle - some of the mandatory attributes were not configured yet. Ready - all the mandatory configurations were done… |
| 1.3.6.1.4.1.164.6.1.15.2.4.1.8 | ColumnituSatResponderServiceBinding | read-create | current | The method used to associate the EVC to the test. The EVC can be represented by: 1. An MA that contains one or more MEPs 2. A single multi-CoS flow 3. Mutiple … |
| 1.3.6.1.4.1.164.6.1.15.2.4.1.9 | ColumnituSatResponderServiceName | read-create | current | The name of the tested service. The combined values of this object and ituSatResponderEgressPort are used to find the corresponding flows in the flowTable. Thi… |
| 1.3.6.1.4.1.164.6.1.15.2.4.1.10 | ColumnituSatResponderEgressPort | read-create | current | The physical or logical port through which the tested service is transmitted towards the network. The combined values of this object and ituSatResponderService… |
| 1.3.6.1.4.1.164.6.1.15.2.5 | TableituSatGeneratorPolicerTable | not-accessible | current | This table contains bandwidth profiles, at the P-bit level, to be used in Y.1564 tests. A bandwidth profile defined in this table overrides the policer configu… |
| 1.3.6.1.4.1.164.6.1.15.2.5.1 | RowituSatGeneratorPolicerEntry | not-accessible | current | An entry in Y.1564 policer profile P-bit table. When a row is created, the ituSatGeneratorIndex must point to an already existing row of ituSatGeneratorTable. … |
| 1.3.6.1.4.1.164.6.1.15.2.5.1.1 | ColumnituSatGeneratorPolicerPbitIndex | not-accessible | current | A single P-bit to which the configuration in this table applies. |
| 1.3.6.1.4.1.164.6.1.15.2.5.1.2 | ColumnituSatGeneratorPolicerRowStatus | read-create | current | This object enables creation and deletion of per P-bit bandwidth profiles. |
| 1.3.6.1.4.1.164.6.1.15.2.5.1.3 | ColumnituSatGeneratorPolicerCir | read-create | current | This attribute defines the Committed Information Rate for the EVC.CoS. Ignored when the value of ituSatGeneratorPolicerProfile is not zero. |
| 1.3.6.1.4.1.164.6.1.15.2.5.1.4 | ColumnituSatGeneratorPolicerCbs | read-create | current | This attribute defines the Committed Burst Size for the EVC.CoS. Ignored when the value of ituSatGeneratorPolicerProfile is not zero. |
| 1.3.6.1.4.1.164.6.1.15.2.5.1.5 | ColumnituSatGeneratorPolicerEir | read-create | current | This attribute defines the Excessive Information Rate for the EVC.CoS. Ignored when the value of ituSatGeneratorPolicerProfile is not zero. |
| 1.3.6.1.4.1.164.6.1.15.2.5.1.6 | ColumnituSatGeneratorPolicerEbs | read-create | current | This attribute defines the Excessive Burst Size for the EVC.CoS. Ignored when the value of ituSatGeneratorPolicerProfile is not zero. |
| 1.3.6.1.4.1.164.6.1.15.2.5.1.7 | ColumnituSatGeneratorPolicerProfile | read-create | current | An optional pre-defined policer profile to be used in the test. May be set to the value of an existing instance of bwProfileIndex in MEF-R.bwProfileTable. In t… |
| 1.3.6.1.4.1.164.6.1.15.2.6 | TabletwampControllerTable | not-accessible | current | This table includes controller parameters. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1 | RowtwampControllerEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.1 | ColumntwampControllerId | not-accessible | current | A unique number as controller identifier. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.2 | ColumntwampControllerRowStatus | read-create | current | This object enables creation and deletion of Controllers |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.3 | ColumntwampControllerName | read-create | current | The controller Name and the controller index |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.4 | ColumntwampControllerStatus | read-only | current | The current status of a controller. Status options: adminOff - Cancelled by the user. idle - some of the mandatory attributes were not configured yet. ready - … |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.5 | ColumntwampControllerType | read-create | current | Indicates twamp controller's type. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.6 | ColumntwampControllerL2Probe | read-create | current | Enables L2 probe mode. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.7 | ColumntwampControllerIngressEgressPort | read-create | current | Ingress and egress port ifIndex for layer 2 service definition in L2-probe mode. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.8 | ColumntwampControllerOuterVlan | read-create | current | Outer VLAN definition for layer 2 service definition in L2-probe mode. Value 4294967295 (0xFFFFFFFF) = Not Applicable. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.9 | ColumntwampControllerInnerVlan | read-create | current | Inner VLAN definition for layer 2 service definition in L2-probe mode. Value 4294967295 (0xFFFFFFFF) = Not Applicable. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.10 | ColumntwampControllerOuterPbit | read-create | current | Outer VLAN Pbit definition for layer 2 service definition in L2-probe mode. Values (0..7) represents a different 802.1 fixed P-bit value. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.11 | ColumntwampControllerInnerPbit | read-create | current | Inner VLAN Pbit definition for layer 2 service definition in L2-probe mode. Values (0..7) represents a different 802.1 fixed P-bit value. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.12 | ColumntwampControllerRouterEntity | read-create | current | The router entity which the controller belongs to. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.13 | ColumntwampControllerLocalAddrType | read-create | current | The address type of IP Address associated to twamp controller. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.14 | ColumntwampControllerLocalAddr | read-create | current | The IP Address associated to twamp controller. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.15 | ColumntwampControllerAssociatedRI | read-only | current | The ifIndex of the Router Interface associated with TWAMP controller. |
| 1.3.6.1.4.1.164.6.1.15.2.6.1.16 | ColumntwampControllerTodStatus | read-only | current | The TOD (Time Of Day) status of the controller in one-way calculation mode. Status options: outOfSync - TOD is out of sync. sync - TOD is sync. unknown - TOD s… |
| 1.3.6.1.4.1.164.6.1.15.2.7 | TabletwampPeerTable | not-accessible | current | This table includes controller's peer parameters. |
| 1.3.6.1.4.1.164.6.1.15.2.7.1 | RowtwampPeerEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.2.7.1.1 | ColumntwampPeerAddrType | not-accessible | current | The address type of IP Address associated to twamp peer responder and an entry index. |
| 1.3.6.1.4.1.164.6.1.15.2.7.1.2 | ColumntwampPeerAddr | not-accessible | current | The IP Address associated to twamp peer responder and and an entry index. |
| 1.3.6.1.4.1.164.6.1.15.2.7.1.3 | ColumntwampPeerRowStatus | read-create | current | This object enables creation and deletion of Controller's peers. |
| 1.3.6.1.4.1.164.6.1.15.2.7.1.4 | ColumntwampPeerActivateCmd | read-create | current | Command to activate all Peer's test sessions. off - initial mode, peer's tests are not active. on - peer's tests are active. |
| 1.3.6.1.4.1.164.6.1.15.2.7.1.5 | ColumntwampPeerActivateDuration | read-create | current | Duration test sessions in minutes. Zero value presents for ever test duration. Duration parameter value distinguish between test in continuous or non-continuou… |
| 1.3.6.1.4.1.164.6.1.15.2.7.1.6 | ColumntwampPeerStartDateAndTime | read-only | current | The date and time when peer activation had started. If the peer was never activated a null value is returned. |
| 1.3.6.1.4.1.164.6.1.15.2.7.1.7 | ColumntwampPeerCalcMode | read-create | current | Peer metrics calculation mode - round-trip, one-way or one-way - Responder Agnostic Delay Measurements. This parameter is not relevant when using ICMP-Echo pro… |
| 1.3.6.1.4.1.164.6.1.15.2.7.1.8 | ColumntwampPeerResponderSeqNum | read-create | current | Peer metrics calculation awareness to a responder that transmits independent sequence number. This parameter is not relevant when using ICMP-Echo protocol. |
| 1.3.6.1.4.1.164.6.1.15.2.7.1.9 | ColumntwampPeerResponderTodStatus | read-only | current | The TOD (Time Of Day) status of the peer's responder in one-way calculation mode. Status options: outOfSync - TOD is out of sync. sync - TOD is sync. unknown -… |
| 1.3.6.1.4.1.164.6.1.15.2.7.1.10 | ColumntwampPeerElapsedTime | read-only | current | The number of seconds that have elapsed since activation of the peer. |
| 1.3.6.1.4.1.164.6.1.15.2.7.1.11 | ColumntwampPeerDescr | read-create | current | Description of the current peer entry. Default description will be: '' (peer's ipv4/ipv6 address) |
| 1.3.6.1.4.1.164.6.1.15.2.7.1.12 | ColumntwampPeerLastCalcMode | read-only | current | Peer's calculation mode configuration for last active sessions. Copy of twampPeerCalcMode on peer activation. |
| 1.3.6.1.4.1.164.6.1.15.2.7.1.13 | ColumntwampPeerLastResponderSeqNum | read-only | current | Peer's 'responder sequence number' configuration for last active sessions. copy of twampPeerResponderSeqNum on peer activation. |
| 1.3.6.1.4.1.164.6.1.15.2.8 | TabletwampContSessionTable | not-accessible | current | This table includes controller's test session parameters. |
| 1.3.6.1.4.1.164.6.1.15.2.8.1 | RowtwampContSessionEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.1 | ColumntwampContSessionId | not-accessible | current | A unique number as controller test session identifier. |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.2 | ColumntwampContSessionRowStatus | read-create | current | This object enables creation and deletion of test session (controller side). |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.3 | ColumntwampContSessionName | read-create | current | The test session Name and and an entry index (controller side). |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.4 | ColumntwampContSessionStartDateAndTime | read-only | current | The date and time when test session had started. If the test was never activated a null value is returned. |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.5 | ColumntwampContSessionStatus | read-only | current | The current status of a test session. Status options: idle - the controller which the test session related to is in 'notReady' status. ready - all the mandator… |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.6 | ColumntwampContSessionLocalL4PortNumber | read-only | current | The layer 4 source port number associated to twamp controller. This parameter is not relevant when using ICMP-Echo protocol. |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.7 | ColumntwampContSessionPeerL4PortNumber | read-create | current | The layer 4 port number associated to twamp peer responder. This parameter is not relevant when using ICMP-Echo protocol. In case TWAMP control protocol is use… |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.8 | ColumntwampContSessionPeerDscp | read-create | current | The DSCP value to be use in the test session packets. |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.9 | ColumntwampContSessionTestProfileId | read-create | current | The identifier of test profile to be use by the test session. |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.10 | ColumntwampContSessionTxPackets | read-only | current | The number packets related to the test session that where transmitted successfully (controller side). |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.11 | ColumntwampContSessionRxPackets | read-only | current | The number packets related to the test session that where received successfully (controller side). |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.12 | ColumntwampContSessionResult | read-only | current | Bit map representing current interval test results related to Threshold Crossing Alerts (TCA). A bit is set when specific test has crossed its threshold. |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.13 | ColumntwampContSessionConfChanged | read-only | current | Indication whether the configuration of the test was changed after the test was completed. |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.14 | ColumntwampContSessionConvertedIndex | read-only | current | This attribute defines the converted index assigned to this TWAMP Session. |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.15 | ColumntwampContSessionResultFwd | read-only | current | Bit map representing current interval forward path test results related to Threshold Crossing Alerts (TCA). A bit is set when specific test has crossed its thr… |
| 1.3.6.1.4.1.164.6.1.15.2.8.1.16 | ColumntwampContSessionResultBck | read-only | current | Bit map representing current interval backward path test results related to Threshold Crossing Alerts (TCA). A bit is set when specific test has crossed its th… |
| 1.3.6.1.4.1.164.6.1.15.2.9 | TabletwampResponderTable | not-accessible | current | This table includes responder parameters. |
| 1.3.6.1.4.1.164.6.1.15.2.9.1 | RowtwampResponderEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.1 | ColumntwampResponderId | not-accessible | current | A unique number as responder identifier. |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.2 | ColumntwampResponderRowStatus | read-create | current | This object enables creation and deletion of Responders |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.3 | ColumntwampResponderName | read-create | current | The responder Name and the responder index |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.4 | ColumntwampResponderStatus | read-only | current | The current status of a responder. Status options: adminOff - Cancelled by the user. notReady - some of the mandatory attributes were not configured yet. idle … |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.5 | ColumntwampResponderType | read-create | current | Indicates twamp responder's type. |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.6 | ColumntwampResponderL2Probe | read-create | current | Enables L2 probe mode. |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.7 | ColumntwampResponderIngressEgressPort | read-create | current | Ingress and egress port for layer 2 service definition in L2-probe mode. |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.8 | ColumntwampResponderOuterVlan | read-create | current | Outer VLAN definition for layer 2 service definition in L2-probe mode. Value 4294967295 (0xFFFFFFFF) = Not Applicable. |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.9 | ColumntwampResponderInnerVlan | read-create | current | Inner VLAN definition for layer 2 service definition in L2-probe mode. Value 4294967295 (0xFFFFFFFF) = Not Applicable. |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.10 | ColumntwampResponderOuterPbit | read-create | current | Outer VLAN Pbit definition for layer 2 service definition in L2-probe mode. Values (0..7) represents a different 802.1 fixed P-bit value. Value 254 represents … |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.11 | ColumntwampResponderInnerPbit | read-create | current | Inner VLAN Pbit definition for layer 2 service definition in L2-probe mode. Values (0..7) represents a different 802.1 fixed P-bit value. Value 254 represents … |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.12 | ColumntwampResponderRouterEntity | read-create | current | The router entity which the responder belongs to. |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.13 | ColumntwampResponderLocalAddrType | read-create | current | The address type of IP Address associated to twamp responder. |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.14 | ColumntwampResponderLocalAddr | read-create | current | The IP Address associated to twamp responder. |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.15 | ColumntwampResponderAssociatedRI | read-only | current | The ifIndex of the Router Interface associated with TWAMP responder. |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.16 | ColumntwampResponderTxSeqNum | read-create | current | Responder definition to transmit independent sequence number. |
| 1.3.6.1.4.1.164.6.1.15.2.9.1.17 | ColumntwampResponderTxExtendedInfo | read-create | current | Responder definition to interop mode. A responder with enabled interop mode sends proprietary information in TWAMP payload. |
| 1.3.6.1.4.1.164.6.1.15.2.10 | TabletwampResSessionTable | not-accessible | current | This table includes responder's test session parameters. |
| 1.3.6.1.4.1.164.6.1.15.2.10.1 | RowtwampResSessionEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.2.10.1.1 | ColumntwampResSessionId | not-accessible | current | A unique number as responder test session identifier. |
| 1.3.6.1.4.1.164.6.1.15.2.10.1.2 | ColumntwampResSessionRowStatus | read-create | current | This object enables creation and deletion of responder's test session. |
| 1.3.6.1.4.1.164.6.1.15.2.10.1.3 | ColumntwampResSessionName | read-create | current | The responder test session Name and and an entry index. |
| 1.3.6.1.4.1.164.6.1.15.2.10.1.4 | ColumntwampResSessionLocalL4PortNumber | read-create | current | The layer 4 port number associated to twamp responder. This object is not relevant in case twampResponderType is configured to 'twamp', where session layer 4 p… |
| 1.3.6.1.4.1.164.6.1.15.2.10.1.5 | ColumntwampResSessionTxPackets | read-only | current | The number packets related to the test session that where transmitted successfully (responder side). |
| 1.3.6.1.4.1.164.6.1.15.2.10.1.6 | ColumntwampResSessionRxPackets | read-only | current | The number packets related to the test session that where received successfully (responder side). |
| 1.3.6.1.4.1.164.6.1.15.2.15 | TableituSatSingleCosFlowTable | not-accessible | current | This table specifies the flows that should be used in Y.1564 tests. The flows that are pointed by this table must be single CoS flows. The table is relevant fo… |
| 1.3.6.1.4.1.164.6.1.15.2.15.1 | RowituSatSingleCosFlowEntry | not-accessible | current | An entry in Y.1564 single CoS flow table. When a row is created, if the value of ituSatSingleCosFlowFunction is generator(1): 1. The ituSatSingleCosFlowFunctio… |
| 1.3.6.1.4.1.164.6.1.15.2.15.1.1 | ColumnituSatSingleCosFlowFunction | not-accessible | current | The type of the Y.1564 function. This inex object allows to define a single common table that can be used by both generators and responders. |
| 1.3.6.1.4.1.164.6.1.15.2.15.1.2 | ColumnituSatSingleCosFlowFunctionIndex | not-accessible | current | The identifier of the generator or responder. |
| 1.3.6.1.4.1.164.6.1.15.2.15.1.3 | ColumnituSatSingleCosFlowIdx1 | not-accessible | current | The value of rad.flowIdx1 of the associated flow. |
| 1.3.6.1.4.1.164.6.1.15.2.15.1.4 | ColumnituSatSingleCosFlowIdx2 | not-accessible | current | The value of rad.flowIdx2 of the associated flow. |
| 1.3.6.1.4.1.164.6.1.15.2.15.1.5 | ColumnituSatSingleCosFlowRowStatus | read-create | current | This object enables addition and deletion of single CoS flows to/from the Y.1564 test. |
| 1.3.6.1.4.1.164.6.1.15.3 | NoderadTestPerfRepResults | |||
| 1.3.6.1.4.1.164.6.1.15.3.1 | TabletstNePerfRepGeneralResultsTable | not-accessible | current | This table includes the general status of each trial. An entry in this table will be created upon activating a test and shall be removed upon deleting a test. |
| 1.3.6.1.4.1.164.6.1.15.3.1.1 | RowtstNePerfRepGeneralResultsEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.3.1.1.1 | ColumntstNePerfRepGeneralResultsTestType | read-only | current | The type of the test. The value of this object shall be populated by the NE according to tstNePerfRepTestType |
| 1.3.6.1.4.1.164.6.1.15.3.1.1.2 | ColumntstNePerfRepGeneralResultsTrialNumber | not-accessible | current | The test trail number. |
| 1.3.6.1.4.1.164.6.1.15.3.1.1.3 | ColumntstNePerfRepGeneralResultsStatus | read-only | current | The status of the trial. |
| 1.3.6.1.4.1.164.6.1.15.3.1.1.4 | ColumntstNePerfRepGeneralResultsDuration | read-only | current | The duration of the trial (hundredths of seconds). |
| 1.3.6.1.4.1.164.6.1.15.3.2 | TablethroughputReportTable | not-accessible | current | This table indicates the throughput Report. An entry in this table will be created upon activating the test and only if the tstNePerfRepTestType = throughput (… |
| 1.3.6.1.4.1.164.6.1.15.3.2.1 | RowthroughputReportEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.3.2.1.1 | ColumnthroughputReportTrialNumber | not-accessible | current | The test trail number. |
| 1.3.6.1.4.1.164.6.1.15.3.2.1.2 | ColumnthroughputReportPacketSize | not-accessible | current | The packet size that was tested. |
| 1.3.6.1.4.1.164.6.1.15.3.2.1.3 | ColumnthroughputReportThroughputTheoretical | read-only | current | The max theoretical Throughput (FPS) on this media. |
| 1.3.6.1.4.1.164.6.1.15.3.2.1.4 | ColumnthroughputReportResults | read-only | current | The actual measured Throughput (FPS). |
| 1.3.6.1.4.1.164.6.1.15.3.2.1.5 | ColumnthroughputReportDataPattern | read-only | current | The pattern at the test frame payload. |
| 1.3.6.1.4.1.164.6.1.15.3.2.1.6 | ColumnthroughputReportResultsBps | read-only | current | The actual measured Throughput (BPS). Note, the conversion between PPS to BPS depends on the value of tstNePerfRepTestRateConvention. |
| 1.3.6.1.4.1.164.6.1.15.3.2.1.7 | ColumnthroughputReportCustomPacketSize | read-create | current | A user configurable frame size to be used in the tests. Relevant only when the scustom (14) is set to RadTestPerfresultFrameSize. |
| 1.3.6.1.4.1.164.6.1.15.3.3 | TablelatencyReportTable | not-accessible | current | This table indicates the throughput Report. An entry in this table will be created upon activating the test and only if the tstNePerfRepTestType = latency (2) … |
| 1.3.6.1.4.1.164.6.1.15.3.3.1 | RowlatencyReportEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.3.3.1.1 | ColumnlatencyReportTrialNumber | not-accessible | current | The test trail number. |
| 1.3.6.1.4.1.164.6.1.15.3.3.1.2 | ColumnlatencyReportPacketSize | not-accessible | current | The packet size that was tested. |
| 1.3.6.1.4.1.164.6.1.15.3.3.1.3 | ColumnlatencyReportType | read-only | current | RFC1245 definition: store and forward devices: The time interval starting when the last bit of the input frame reaches the input port and ending when the first… |
| 1.3.6.1.4.1.164.6.1.15.3.3.1.4 | ColumnlatencyReportResult | read-only | current | The Latency result in microseconds. |
| 1.3.6.1.4.1.164.6.1.15.3.3.1.5 | ColumnlatencyReportCustomPacketSize | read-create | current | A user configurable frame size to be used in the tests. Relevant only when the scustom (14) is set to RadTestPerfresultFrameSize. |
| 1.3.6.1.4.1.164.6.1.15.3.4 | TableframelossRateReportTable | not-accessible | current | This table indicates the Frame loss result. An entry in this table will be created upon activating the test and only if the tstNePerfRepTestType = frameloss (1… |
| 1.3.6.1.4.1.164.6.1.15.3.4.1 | RowframelossRateReportEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.3.4.1.1 | ColumnframelossRateReportTrialNumber | not-accessible | current | The test trail number. |
| 1.3.6.1.4.1.164.6.1.15.3.4.1.2 | ColumnframelossRateReportPacketSize | not-accessible | current | The packet size that was tested. |
| 1.3.6.1.4.1.164.6.1.15.3.4.1.3 | ColumnframelossRateReportInputRate | not-accessible | current | The input frame rate (in percentage) of the theoretical rate at the specific frame size. |
| 1.3.6.1.4.1.164.6.1.15.3.4.1.4 | ColumnframelossRateReportResults | read-only | current | The number of error frames. |
| 1.3.6.1.4.1.164.6.1.15.3.4.1.5 | ColumnframelossRateReportCustomPacketSize | read-create | current | A user configurable frame size to be used in the tests. Relevant only when the scustom (14) is set to RadTestPerfresultFrameSize. |
| 1.3.6.1.4.1.164.6.1.15.3.5 | TabletstNePerfRepStatusTable | not-accessible | current | This table includes the status of each iteration of test x. An entry in this table will be created upon activating a test and shall be removed upon deleting a … |
| 1.3.6.1.4.1.164.6.1.15.3.5.1 | RowtstNePerfRepStatusEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.3.5.1.1 | ColumntstNePerfRepIteration | read-only | current | The iteration index is used to distinguish between the tests iterations. i.e. if the user activates 'test 1' twice, the NE shall the store the results of both … |
| 1.3.6.1.4.1.164.6.1.15.3.5.1.2 | ColumntstNePerfRepStartTime | read-only | current | The object indicate the Date And Time of the iteration. |
| 1.3.6.1.4.1.164.6.1.15.3.5.1.3 | ColumntstNePerfRepDuration | read-only | current | The object indicate the duration of the test. |
| 1.3.6.1.4.1.164.6.1.15.3.5.1.4 | ColumntstNePerfRepStatus | read-only | current | The status of the test. |
| 1.3.6.1.4.1.164.6.1.15.3.5.1.5 | ColumntstNePerfRepType | read-only | current | The type of the current running test. |
| 1.3.6.1.4.1.164.6.1.15.3.5.1.6 | ColumntstNePerfRepIterationNum | read-only | current | The number of iteration in the current running test Use only if tstNePerfRepIteration = 0. |
| 1.3.6.1.4.1.164.6.1.15.3.5.1.7 | ColumntstNePerfRepTrial | read-only | current | The number of trial in iteration in the current running test. |
| 1.3.6.1.4.1.164.6.1.15.3.5.1.8 | ColumntstNePerfRepAttemptNum | read-only | current | The attempt number in the current running test. |
| 1.3.6.1.4.1.164.6.1.15.3.5.1.9 | ColumntstNePerfRepFrameSize | read-only | current | The Frame Size in the current running test. |
| 1.3.6.1.4.1.164.6.1.15.3.5.1.10 | ColumntstNePerfRepLatencyNum | read-only | current | The actual number of Latency iterations that were performed. |
| 1.3.6.1.4.1.164.6.1.15.3.6 | TableituSatReportTable | not-accessible | current | This table holds the measurements and results for each Y.1564 test that was performed. |
| 1.3.6.1.4.1.164.6.1.15.3.6.1 | RowituSatReportEntry | not-accessible | current | An entry in Y.1564 report table. Rows are automatically created when the corresponding generator in the ituSatGeneratorTable is successfully activated - for de… |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.1 | ColumnituSatReportPbitIndex | not-accessible | current | The P-bit index of the report. Allows holding measurements and result per P-bit. One entry for each set P-bit in the ituSatGeneratorTestedPbits. If the ituSatG… |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.2 | ColumnituSatReportTestTypeIndex | not-accessible | current | The sub-test type index of the report. Allows holding measurements and result per sub-test type. Entries are created according to the associated configuration … |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.3 | ColumnituSatReportDirectionIndex | not-accessible | current | The direction index of the report. Allows holding measurements per direction. For unidirectional test only the forward(1) entry is created. For bidirectional t… |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.4 | ColumnituSatReportResult | read-only | current | The result of the sub-test. The initial value is notApplicable(1). Upon completion of the sub-test the value changes to passed(2) or failed(3). If the test is … |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.5 | ColumnituSatReportTxRate | read-only | current | The transmission rate that the generator was configured to in the sub-test. |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.6 | ColumnituSatReportIrMin | read-only | current | The minimum measured information rate. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.7 | ColumnituSatReportIrAverage | read-only | current | The average calculated information rate. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.8 | ColumnituSatReportIrMax | read-only | current | The maximum measured information rate. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.9 | ColumnituSatReportTxFrames | read-only | current | The number of transmitted frames. The initial value is one. |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.10 | ColumnituSatReportLostFrames | read-only | current | The number of frames lost. The FLR is calculated by: (ituSatReportLostFrames / ituSatReportTxFrames) The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.11 | ColumnituSatReportFtdMin | read-only | current | The minimum measured frame transfer delay. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.12 | ColumnituSatReportFtdAverage | read-only | current | The average calculated frame transfer delay. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.13 | ColumnituSatReportFtdMax | read-only | current | The maximum measured frame transfer delay. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.14 | ColumnituSatReportFtdStd | read-only | current | The calculated standard deviation of the frame transfer delay. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.15 | ColumnituSatReportFdvAverage | read-only | current | The average calculated frame delay variation. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.16 | ColumnituSatReportFdvMax | read-only | current | The maximum calculated frame delay variation. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.17 | ColumnituSatReportUas | read-only | current | The number of unavailable seconds. This object is relevant only for the performance test. For the other test type entries the value is zero. The initial value … |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.18 | ColumnituSatReportAvailability | read-only | current | The percentage of available time. The availability is calculated by: (ituSatGeneratorPerfDuration - ituSatReportUas) * 10000 / ituSatGeneratorPerfDuration This… |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.19 | ColumnituSatReportTotalTxRate | read-only | current | The total transmission rate (i.e. green and yellow frames) that the generator was configured to in the sub-test. This object is relevant only for the color-awa… |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.20 | ColumnituSatReportTotalIrAverage | read-only | current | The average calculated total information rate (i.e. green and yellow frames). This object is relevant only for the color-aware EIR and color-aware traffic poli… |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.21 | ColumnituSatReportTotalTxFrames | read-only | current | The total number of transmitted frames (i.e. green and yellow frames). This object is relevant only for the color-aware EIR and color-aware traffic policing te… |
| 1.3.6.1.4.1.164.6.1.15.3.6.1.22 | ColumnituSatReportTotalLostFrames | read-only | current | The total number of frames lost (i.e. green and yellow frames). The total FLR is calculated by: (ituSatReportTotalLostFrames / ituSatReportTotalTxFrames) This … |
| 1.3.6.1.4.1.164.6.1.15.3.7 | TableituSatResponderPerfTable | not-accessible | current | This table holds packet counters for Y.1564 test responders. |
| 1.3.6.1.4.1.164.6.1.15.3.7.1 | RowituSatResponderPerfEntry | not-accessible | current | An entry in Y.1564 responder performance table. Rows are automatically created when the corresponding responder in the ituSatResponderTable is successfully ena… |
| 1.3.6.1.4.1.164.6.1.15.3.7.1.1 | ColumnituSatResponderPerfPbitIndex | not-accessible | current | The P-bit index of the responder performance. Allows holding counts per P-bit. One entry for each P-bit that participates in the test at the responder side. Fo… |
| 1.3.6.1.4.1.164.6.1.15.3.7.1.2 | ColumnituSatResponderPerfRxFrames | read-only | current | The number of frames received by the responder. |
| 1.3.6.1.4.1.164.6.1.15.3.7.1.3 | ColumnituSatResponderPerfTxFrames | read-only | current | The number of frames transmitted by the responder. |
| 1.3.6.1.4.1.164.6.1.15.3.7.1.4 | ColumnituSatResponderPerfAssociatedMEP | read-only | current | The identifier of the MEP that is associated with the responder and specific P-bit. |
| 1.3.6.1.4.1.164.6.1.15.3.7.1.5 | ColumnituSatResponderPerfAssociatedService | read-only | current | The identifier of the service that is associated with the responder and specific P-bit. A value of zero is reserved for the case of automatic CoS completion. |
| 1.3.6.1.4.1.164.6.1.15.3.8 | TableituSatConfPbitTable | not-accessible | current | This table holds the results of the configuration test per generator, P-bit and direction. Note: ituSatReportResult and ituSatBurstReportResult hold results pe… |
| 1.3.6.1.4.1.164.6.1.15.3.8.1 | RowituSatConfPbitEntry | not-accessible | current | An entry in Y.1564 configuration test P-bit table. Rows are automatically created when the corresponding generator in the ituSatGeneratorTable is successfully … |
| 1.3.6.1.4.1.164.6.1.15.3.8.1.1 | ColumnituSatConfPbitIndex | not-accessible | current | The P-bit index of the configuration test. Allows holding configuration test results per P-bit. One entry for each P-bit that participates in the test at the g… |
| 1.3.6.1.4.1.164.6.1.15.3.8.1.2 | ColumnituSatConfPbitDirectionIndex | not-accessible | current | The direction index of the configuration test. Allows holding configuration test results per direction. For unidirectional test only the forward(1) entry is cr… |
| 1.3.6.1.4.1.164.6.1.15.3.8.1.3 | ColumnituSatConfPbitResult | read-only | current | The result of the last configuration test. The value notApplicable(1) is returned in the following cases: - The configuration test was not performed in the las… |
| 1.3.6.1.4.1.164.6.1.15.3.9 | TabletwampReportCurrentTable | not-accessible | current | TWAMP report table to show current interval. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1 | RowtwampReportCurrentEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.1 | ColumntwampReportCurrentStartDateAndTime | read-only | current | The date and time when current interval had started. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.2 | ColumntwampReportCurrentElapsedTime | read-only | current | The number of seconds that have elapsed since the beginning of current interval of the test session. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.3 | ColumntwampReportCurrentTxPackets | read-only | current | The number of packets related to the test session that where transmitted successfully. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.4 | ColumntwampReportCurrentRxValidPackets | read-only | current | The number of packets related to the test session that are valid (e.g. their delay less than 'loss timeout'). |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.5 | ColumntwampReportCurrentLossPackets | read-only | current | The number of packets related to the test session that where loss. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.6 | ColumntwampReportCurrentAvailableSeconds | read-only | current | The number of available seconds in current interval. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.7 | ColumntwampReportCurrentDelayMin | read-only | current | The minimum measured delay of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.8 | ColumntwampReportCurrentDelayMax | read-only | current | The maximum measured delay of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.9 | ColumntwampReportCurrentDelaySum | read-only | current | The sum of delay of all valid packets for current interval. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.10 | ColumntwampReportCurrentDelayAverage | read-only | current | The average calculated delay of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.11 | ColumntwampReportCurrentDelayedPackets | read-only | current | The number of received valid packets with delay more than delay threshold. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.12 | ColumntwampReportCurrentPdvMax | read-only | current | The calculated PDV of received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.13 | ColumntwampReportCurrentIpdvMax | read-only | current | The calculated IPDV max of received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.14 | ColumntwampReportCurrentIpdvSum | read-only | current | The sum of calculated IPDV max of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.15 | ColumntwampReportCurrentIpdvValidResults | read-only | current | The number of valid calculated IPDV results (result is valid only when IPDV is calculated between 2 valid packets). |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.16 | ColumntwampReportCurrentIpdvFwdMax | read-only | current | The calculated IPDV forward max (one way) of received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.17 | ColumntwampReportCurrentIpdvFwdSum | read-only | current | The sum of calculated IPDV forward max (one way) of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.18 | ColumntwampReportCurrentIpdvFwdValidResults | read-only | current | The number of valid calculated IPDV Fwd results (result is valid only when IPDV is calculated between 2 valid packets). |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.19 | ColumntwampReportCurrentIpdvBckMax | read-only | current | The calculated IPDV backwards max (one way) of received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.20 | ColumntwampReportCurrentIpdvBckSum | read-only | current | The sum of calculated IPDV backwards max (one way) of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.21 | ColumntwampReportCurrentIpdvBckValidResults | read-only | current | The number of valid calculated IPDV Bck results (result is valid only when IPDV is calculated between 2 valid packets). |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.22 | ColumntwampReportCurrentReorderedFwd | read-only | current | The number of packets related to a test session that where reordered during the forward path. A reordered packet means a 'late' arrived packet with sequence nu… |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.23 | ColumntwampReportCurrentReorderedBck | read-only | current | The number of packets related to a test session that where reordered during the backward path. A reordered packet means a 'late' arrived packet with sequence n… |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.24 | ColumntwampReportCurrentDuplicateFwd | read-only | current | The number of packets related to a test session that where duplicated during the forward path. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.25 | ColumntwampReportCurrentDuplicateBck | read-only | current | The number of packets related to a test session that where duplicated during the backward path. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.26 | ColumntwampReportCurrentFragmentedFwd | read-only | current | The number of packets related to a test session that where fragmented during the forward path. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.27 | ColumntwampReportCurrentFragmentedBck | read-only | current | The number of packets related to a test session that where fragmented during the backward path. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.28 | ColumntwampReportCurrentDelayFwdMin | read-only | current | The minimum measured delay on the forward path of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.29 | ColumntwampReportCurrentDelayFwdMax | read-only | current | The maximum measured delay on the forward path of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.30 | ColumntwampReportCurrentDelayFwdSum | read-only | current | The sum of delay on the forward path of all valid packets for current interval. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.31 | ColumntwampReportCurrentDelayBckMin | read-only | current | The minimum measured delay on the backward path of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.32 | ColumntwampReportCurrentDelayBckMax | read-only | current | The maximum measured delay on the backward path of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.33 | ColumntwampReportCurrentDelayBckSum | read-only | current | The sum of delay on the backward path of all valid packets for current interval. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.34 | ColumntwampReportCurrentDelayedPacketsFwd | read-only | current | The number of received valid packets on the forward path with delay more than delay threshold. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.35 | ColumntwampReportCurrentDelayedPacketsBck | read-only | current | The number of received valid packets on the backward path with delay more than delay threshold. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.36 | ColumntwampReportCurrentPdvMaxFwd | read-only | current | The calculated PDV of received valid packets for the forward path . The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.37 | ColumntwampReportCurrentPdvMaxBck | read-only | current | The calculated PDV of received valid packets for the backward path . The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.38 | ColumntwampReportCurrentTxPacketsFwd | read-only | current | The number of packets related to the forward path of the test session that where transmitted successfully. Forward direction counter is based on twampReportCur… |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.39 | ColumntwampReportCurrentTxPacketsBck | read-only | current | The number of packets related to the backward path of the test session that where transmitted successfully. Backward direction counter is based on responder's … |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.40 | ColumntwampReportCurrentRxValidPacketsFwd | read-only | current | The number of packets related to the forward path of the test session that are valid (e.g. their delay less than 'loss timeout'). |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.41 | ColumntwampReportCurrentRxValidPacketsBck | read-only | current | The number of packets related to the backward path of the test session that are valid (e.g. their delay less than 'loss timeout'). |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.42 | ColumntwampReportCurrentLossPacketsFwd | read-only | current | The number of packets related to the test session that where loss during the forward path. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.43 | ColumntwampReportCurrentLossPacketsBck | read-only | current | The number of packets related to the test session that where loss during the backward path. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.44 | ColumntwampReportCurrentAvailableSecondsFwd | read-only | current | The number of available seconds for the forward path in current interval. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.45 | ColumntwampReportCurrentAvailableSecondsBck | read-only | current | The number of available seconds for the backward path in current interval. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.46 | ColumntwampReportCurrentRxSyncValidPacketsFwd | read-only | current | The number of packets related to the forward path of the test session during sync period (synchronization of date-and-time between controller and responder). |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.47 | ColumntwampReportCurrentRxSyncValidPacketsBck | read-only | current | The number of packets related to the backward path of the test session during sync period (synchronization of date-and-time between controller and responder). |
| 1.3.6.1.4.1.164.6.1.15.3.9.1.48 | ColumntwampReportCurrentSyncSeconds | read-only | current | The number of sync seconds of test session in current interval (synchronization of date-and-time between controller and responder). The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10 | TabletwampReportIntervalTable | not-accessible | current | TWAMP report table to show intervals. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1 | RowtwampReportIntervalEntry | not-accessible | current | An entry in table. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.1 | ColumntwampReportIntervalNumber | not-accessible | current | The Interval index, which is actualy the Interval number, where 1 is the most recently completed interval, and MAX_Number_OF_INTERVALS is the least recently co… |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.2 | ColumntwampReportIntervalStartDateAndTime | read-only | current | The date and time when the interval had started. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.3 | ColumntwampReportIntervalElapsedTime | read-only | current | The number of seconds that have elapsed since the beginning of the interval. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.4 | ColumntwampReportIntervalTxPackets | read-only | current | The number of packets related to the test session that where transmitted successfully. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.5 | ColumntwampReportIntervalRxValidPackets | read-only | current | The number of packets related to the test session that are valid (e.g. their delay less than 'loss timeout'). |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.6 | ColumntwampReportIntervalLossPackets | read-only | current | The number of packets related to the test session that where loss. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.7 | ColumntwampReportIntervalAvailableSeconds | read-only | current | The number of available seconds in an interval. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.8 | ColumntwampReportIntervalDelayMin | read-only | current | The minimum measured delay of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.9 | ColumntwampReportIntervalDelayMax | read-only | current | The maximum measured delay of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.10 | ColumntwampReportIntervalDelaySum | read-only | current | The sum of delay of all valid packets for the interval. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.11 | ColumntwampReportIntervalDelayAverage | read-only | current | The average calculated delay of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.12 | ColumntwampReportIntervalDelayedPackets | read-only | current | The number of received valid packets with delay more than delay threshold. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.13 | ColumntwampReportIntervalPdvMax | read-only | current | The calculated PDV of received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.14 | ColumntwampReportIntervalIpdvMax | read-only | current | The calculated IPDV max of received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.15 | ColumntwampReportIntervalIpdvSum | read-only | current | The sum of calculated IPDV max of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.16 | ColumntwampReportIntervalIpdvValidResults | read-only | current | The number of valid calculated IPDV results (result is valid only when IPDV is calculated between 2 valid packets). |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.17 | ColumntwampReportIntervalIpdvFwdMax | read-only | current | The calculated IPDV forward max (one way) of received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.18 | ColumntwampReportIntervalIpdvFwdSum | read-only | current | The sum of calculated IPDV forward max (one way) of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.19 | ColumntwampReportIntervalIpdvFwdValidResults | read-only | current | The number of valid calculated IPDV Fwd results (result is valid only when IPDV is calculated between 2 valid packets). |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.20 | ColumntwampReportIntervalIpdvBckMax | read-only | current | The calculated IPDV backwards max (one way) of received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.21 | ColumntwampReportIntervalIpdvBckSum | read-only | current | The sum of calculated IPDV backwards max (one way) of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.22 | ColumntwampReportIntervalIpdvBckValidResults | read-only | current | The number of valid calculated IPDV Bck results (result is valid only when IPDV is calculated between 2 valid packets). |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.23 | ColumntwampReportIntervalReorderedFwd | read-only | current | The number of packets related to a test session that where reordered during the forward path. A reordered packet means a 'late' arrived packet with sequence nu… |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.24 | ColumntwampReportIntervalReorderedBck | read-only | current | The number of packets related to a test session that where reordered during the backward path. A reordered packet means a 'late' arrived packet with sequence n… |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.25 | ColumntwampReportIntervalDuplicateFwd | read-only | current | The number of packets related to a test session that where duplicated during the forward path. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.26 | ColumntwampReportIntervalDuplicateBck | read-only | current | The number of packets related to a test session that where duplicated during the backward path. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.27 | ColumntwampReportIntervalFragmentedFwd | read-only | current | The number of packets related to a test session that where fragmented during the forward path. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.28 | ColumntwampReportIntervalFragmentedBck | read-only | current | The number of packets related to a test session that where fragmented during the backward path. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.29 | ColumntwampReportIntervalDelayFwdMin | read-only | current | The minimum measured delay on the forward path of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.30 | ColumntwampReportIntervalDelayFwdMax | read-only | current | The maximum measured delay on the forward path of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.31 | ColumntwampReportIntervalDelayFwdSum | read-only | current | The sum of delay on the forward path of all valid packets for this interval. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.32 | ColumntwampReportIntervalDelayBckMin | read-only | current | The minimum measured delay on the backward path of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.33 | ColumntwampReportIntervalDelayBckMax | read-only | current | The maximum measured delay on the backward path of all received valid packets. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.34 | ColumntwampReportIntervalDelayBckSum | read-only | current | The sum of delay on the backward path of all valid packets for this interval. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.35 | ColumntwampReportIntervalDelayedPacketsFwd | read-only | current | The number of received valid packets on the forward path with delay more than delay threshold. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.36 | ColumntwampReportIntervalDelayedPacketsBck | read-only | current | The number of received valid packets on the backward path with delay more than delay threshold. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.37 | ColumntwampReportIntervalPdvMaxFwd | read-only | current | The calculated PDV of received valid packets for the forward path . The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.38 | ColumntwampReportIntervalPdvMaxBck | read-only | current | The calculated PDV of received valid packets for the backward path . The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.39 | ColumntwampReportIntervalTxPacketsFwd | read-only | current | The number of packets related to the forward path of the test session that where transmitted successfully. Forward direction counter is based on twampReportInt… |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.40 | ColumntwampReportIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.41 | ColumntwampReportIntervalTxPacketsBck | read-only | current | The number of packets related to the backward path of the test session that where transmitted successfully. Backward direction counter is based on responder's … |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.42 | ColumntwampReportIntervalRxValidPacketsFwd | read-only | current | The number of packets related to the forward path of the test session that are valid (e.g. their delay less than 'loss timeout'). |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.43 | ColumntwampReportIntervalRxValidPacketsBck | read-only | current | The number of packets related to the backward path of the test session that are valid (e.g. their delay less than 'loss timeout'). |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.44 | ColumntwampReportIntervalLossPacketsFwd | read-only | current | The number of packets related to the test session that where loss during the forward path. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.45 | ColumntwampReportIntervalLossPacketsBck | read-only | current | The number of packets related to the test session that where loss during the backward path. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.46 | ColumntwampReportIntervalAvailableSecondsFwd | read-only | current | The number of available seconds for the forward path in this interval. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.47 | ColumntwampReportIntervalAvailableSecondsBck | read-only | current | The number of available seconds for the backward path in this interval. The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.48 | ColumntwampReportIntervalRxSyncValidPacketsFwd | read-only | current | The number of packets related to the forward path of the test session during sync period (synchronization of date-and-time between controller and responder). |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.49 | ColumntwampReportIntervalRxSyncValidPacketsBck | read-only | current | The number of packets related to the backward path of the test session during sync period (synchronization of date-and-time between controller and responder). |
| 1.3.6.1.4.1.164.6.1.15.3.10.1.50 | ColumntwampReportIntervalSyncSeconds | read-only | current | The number of sync seconds of test session in this interval (synchronization of date-and-time between controller and responder). The initial value is zero. |
| 1.3.6.1.4.1.164.6.1.15.3.12 | TabletstNeThroughputIterationTable | not-accessible | current | This table contains an information about the number of loss packets in each attempt of throughput rate repetition. |
| 1.3.6.1.4.1.164.6.1.15.3.12.1 | RowtstNeThroughputIterationEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.164.6.1.15.3.12.1.1 | ColumntstNeThroughputIteration | not-accessible | current | The . |
| 1.3.6.1.4.1.164.6.1.15.3.12.1.2 | ColumntstNeThroughputIterationBPS | read-only | current | The tested measured Throughput (in BPS) . |
| 1.3.6.1.4.1.164.6.1.15.3.12.1.3 | ColumntstNeThroughputLossPacket | read-only | current | The number of Lost Frames in the repetition. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RadTestPbitIndex | INTEGER { pbit0 (0), pbit1 (1), pbit2 (2), pbit3 (3), pbit4 (4), pbit5 (5), pbit6 (6), pbit7 (7) } | current | This TC is used to index a table according to the range of P-bit values. |
| RadTestPerfRepFrameSize | BITS { s64 (0), s128 (1), s256 (2), s512 (3), s1024 (4), s1280 (5), s1518 (6), s1700 (7), s1900 (8), s2000 (9), s2048 (10), s4096 (11), s9600 (12), custom (13) } | current | This TC indicates the size of the frames to be tested. |
| RadTestPerfresultFrameSize | INTEGER { s64 (1), s128 (2), s256 (3), s512 (4), s1024 (5), s1280 (6), s1518 (7), s1700 (8), s1900 (9), s2000 (10), s2048 (11), s4096 (12), s9600 (13), custom (14) } | current | This TC indicates the size of the frames for the reports only. |