RAPID-CITY-VSP
5417 objects
Enterprise MIB for the Accelar product family.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4.1.2272 | IdentityrapidCity | Enterprise MIB for the Accelar product family. | ||
| 1.3.6.1.4.1.2272.1 | NodercMgmt | |||
| 1.3.6.1.4.1.2272.1.1 | NodercSystem | |||
| 1.3.6.1.4.1.2272.1.1.1 | ScalarrcSysIpAddr | read-only | current | This entity's IP address. |
| 1.3.6.1.4.1.2272.1.1.2 | ScalarrcSysNetMask | read-only | current | This entity's subnet mask. |
| 1.3.6.1.4.1.2272.1.1.3 | ScalarrcSysBroadcast | read-only | current | This entity's broadcast address. |
| 1.3.6.1.4.1.2272.1.1.7 | ScalarrcSysVersion | read-only | current | Software version running on device |
| 1.3.6.1.4.1.2272.1.1.9 | ScalarrcSysResult | read-only | current | Result from the last system action. |
| 1.3.6.1.4.1.2272.1.1.10 | ScalarrcSysLastChange | read-only | current | Last management initiated configuration change since sysUpTime. |
| 1.3.6.1.4.1.2272.1.1.11 | ScalarrcSysLastVlanChange | read-only | current | Last management initiated VLAN configuration change since sysUpTime. |
| 1.3.6.1.4.1.2272.1.1.12 | ScalarrcSysLastStatisticsReset | read-only | current | Last management initiated statistics reset since sysUpTime. |
| 1.3.6.1.4.1.2272.1.1.13 | ScalarrcSysBufferUtil | read-only | current | Buffer utilization as a percentage of the total amount of buffer space in the system. A high value indicates congestion. |
| 1.3.6.1.4.1.2272.1.1.14 | ScalarrcSysBufferUtilPeak | read-only | current | The largest buffer utilization since sysUpTime |
| 1.3.6.1.4.1.2272.1.1.15 | ScalarrcSysBufferUtilPeakTime | read-only | current | Timestamp for rcSysPeakBandwidth |
| 1.3.6.1.4.1.2272.1.1.16 | ScalarrcSysNVRamSize | read-only | current | Total Non-volatile RAM in Kbytes |
| 1.3.6.1.4.1.2272.1.1.17 | ScalarrcSysNVRamUsed | read-only | current | Non-volatile RAM in use in Kbytes |
| 1.3.6.1.4.1.2272.1.1.18 | ScalarrcSysLastSaveToNVRam | read-only | current | SysUpTime of the last time when NVRAM was written to. This could be a save of the system configuration or via a file transfer of a configuration file. |
| 1.3.6.1.4.1.2272.1.1.19 | ScalarrcSysLastSaveToStandbyNVRam | read-only | current | SysUpTime of the last time when the standby NVRAM (on the back-up CPU board) was written to. |
| 1.3.6.1.4.1.2272.1.1.20 | ScalarrcSysCpuUtil | read-only | deprecated | Percentage of CPU utilization. This object is not supported on VSP. VSP uses rcKhiSlotCpuCurrentUtil |
| 1.3.6.1.4.1.2272.1.1.22 | ScalarrcSysRmonMemSize | read-write | current | Amount of RAM in bytes to allocate for RMON to use when rcSysRmonEnable is TRUE. |
| 1.3.6.1.4.1.2272.1.1.23 | ScalarrcSysRmonEnable | read-write | current | Control whether the RMON feature should be enabled. To enable the RMON feature, set this variable to true. The RMON agent in the device will get started immedi… |
| 1.3.6.1.4.1.2272.1.1.25 | ScalarrcSysRmonTrapOption | read-write | current | Used to indicate whether RMON traps should be sent to only the owner of the RMON alarm (i.e., the manager that created the alarm entry) or all trap recipients … |
| 1.3.6.1.4.1.2272.1.1.26 | ScalarrcSysSupportRouting | read-only | current | Used to indicate whether routing is supported in this product. |
| 1.3.6.1.4.1.2272.1.1.27 | ScalarrcSysSupportWebServer | read-only | current | Used to indicate whether WebServer is supported in this product. |
| 1.3.6.1.4.1.2272.1.1.28 | ScalarrcSysLastIpAddrChange | read-only | current | Last management initiated IP address change since sysUpTime. Any addition or deletion of an IP address to a single routable port or a VLAN is time-stamped by t… |
| 1.3.6.1.4.1.2272.1.1.31 | ScalarrcSysAccessPolicyEnable | read-write | current | Used to configure the system access policy feature. if 'true', the rcSysAccessPolicyTable is examined to determine which packets should be allowed or denied ac… |
| 1.3.6.1.4.1.2272.1.1.32 | ScalarrcSysDefaultRuntimeConfigFileName | read-only | current | default config. |
| 1.3.6.1.4.1.2272.1.1.33 | ScalarrcSysDefaultBootConfigFileName | read-only | current | default boot config. |
| 1.3.6.1.4.1.2272.1.1.34 | ScalarrcSysConfigFileName | read-write | current | File name used in conjunction with rcSysAction. If rcSysAction is set to 'saveRuntimeConfig' or 'saveRuntimeConfigToSlave' then this file name will be used ins… |
| 1.3.6.1.4.1.2272.1.1.35 | ScalarrcSysLastRunTimeConfigSave | read-only | current | SysUpTime of the last time when the run time configuration was written to. |
| 1.3.6.1.4.1.2272.1.1.36 | ScalarrcSysLastRunTimeConfigSaveToSlave | read-only | current | SysUpTime of the last time when the run time configuration was written to slave NVRAM. |
| 1.3.6.1.4.1.2272.1.1.37 | ScalarrcSysLastBootConfigSave | read-only | current | SysUpTime of the last time when the boot configuration was written to. |
| 1.3.6.1.4.1.2272.1.1.38 | ScalarrcSysLastBootConfigSaveOnSlave | read-only | current | SysUpTime of the last time when the boot configuration was written on the slave NVRAM. |
| 1.3.6.1.4.1.2272.1.1.39 | ScalarrcSysRmonUtilizationMethod | read-write | current | Used to control whether RMON should use a half-duplex or full-duplex formula to calculate port utilization. When set to 'halfDuplex', RMON will use InOctets an… |
| 1.3.6.1.4.1.2272.1.1.41 | ScalarrcSysOtherBufferUtil | read-only | current | bw currently consumed |
| 1.3.6.1.4.1.2272.1.1.42 | ScalarrcSysOtherBufferUtilPeak | read-only | current | peak bw since reset |
| 1.3.6.1.4.1.2272.1.1.43 | ScalarrcSysOtherBufferUtilPeakTime | read-only | current | timestamp for rcSysPeakBw |
| 1.3.6.1.4.1.2272.1.1.44 | ScalarrcSysOtherCpuUtil | read-only | current | % cpu utilization |
| 1.3.6.1.4.1.2272.1.1.46 | ScalarrcSysDramSize | read-only | current | Dram size in mega-bytes |
| 1.3.6.1.4.1.2272.1.1.47 | ScalarrcSysDramUsed | read-only | current | Dram used in percentage |
| 1.3.6.1.4.1.2272.1.1.48 | ScalarrcSysDramFree | read-only | current | Dram free size in kilo-bytes |
| 1.3.6.1.4.1.2272.1.1.49 | ScalarrcSysDramMaxBlockFree | read-only | current | Dram max block free size in kilo-bytes |
| 1.3.6.1.4.1.2272.1.1.51 | ScalarrcSysVirtualIpAddr | read-write | current | Virtual IP is an IP address that owned and advertised only by the master CPU. So whichever CPU is master registers this IP address. Unlike the management IP ad… |
| 1.3.6.1.4.1.2272.1.1.52 | ScalarrcSysVirtualNetMask | read-write | current | Net mask of the management virtual Ip address |
| 1.3.6.1.4.1.2272.1.1.53 | ScalarrcSysReadWriteLevel | read-write | current | The status of the read/write level |
| 1.3.6.1.4.1.2272.1.1.55 | ScalarrcSysMTUSize | read-write | current | This is the maximum transmission size of frames that all the ports on the chassis support. |
| 1.3.6.1.4.1.2272.1.1.57 | ScalarrcSysForceTrapSender | read-write | current | This is a flag that if user wants to configured CLIP (Circuit Less IP) as trap originator. |
| 1.3.6.1.4.1.2272.1.1.58 | ScalarrcSysMrouteStrLimit | read-write | current | enable or disable mroute stream limit in system. |
| 1.3.6.1.4.1.2272.1.1.61 | TablercSysAccessPolicyTable | not-accessible | current | Management access policy table. This table is used to permit or deny access to this device via the specified source Id. |
| 1.3.6.1.4.1.2272.1.1.61.1 | RowrcSysAccessPolicyEntry | not-accessible | current | An access policy table entry. |
| 1.3.6.1.4.1.2272.1.1.61.1.1 | ColumnrcSysAccessPolicyId | read-only | current | Policy Id. |
| 1.3.6.1.4.1.2272.1.1.61.1.2 | ColumnrcSysAccessPolicyName | read-write | current | Name of this policy. |
| 1.3.6.1.4.1.2272.1.1.61.1.3 | ColumnrcSysAccessPolicyPolicyEnable | read-write | current | Indicate whether this policy is currently active. |
| 1.3.6.1.4.1.2272.1.1.61.1.4 | ColumnrcSysAccessPolicyMode | read-write | current | Used to indicate whether a packet having a source IP address that matches this entry should be permitted to enter the device or denied access. |
| 1.3.6.1.4.1.2272.1.1.61.1.5 | ColumnrcSysAccessPolicyService | read-write | current | Is represented as bitset to indicate which protocol this entry should be applied to. Value is one of multiple(logical 'OR') of the following values: telnet(1),… |
| 1.3.6.1.4.1.2272.1.1.61.1.6 | ColumnrcSysAccessPolicyPrecedence | read-write | current | Used to indicate the precedence of this policy. The Lower the number the higher the precedence. |
| 1.3.6.1.4.1.2272.1.1.61.1.10 | ColumnrcSysAccessPolicyTrustedHostUserName | read-write | current | User name on the trusted host performing a rlogin into the device. |
| 1.3.6.1.4.1.2272.1.1.61.1.11 | ColumnrcSysAccessPolicyAccessLevel | read-write | current | Access level of trusted host. |
| 1.3.6.1.4.1.2272.1.1.61.1.12 | ColumnrcSysAccessPolicyLog | read-write | current | Used to indicate whether logging should be performed if this policy was applied. |
| 1.3.6.1.4.1.2272.1.1.61.1.13 | ColumnrcSysAccessPolicyUsage | read-only | current | Usage Counter |
| 1.3.6.1.4.1.2272.1.1.61.1.14 | ColumnrcSysAccessPolicyRowStatus | read-write | current | Used to create/delete an entry |
| 1.3.6.1.4.1.2272.1.1.61.1.15 | ColumnrcSysAccessPolicyAccessStrict | read-write | current | Used to restrict the access level specified in the system access policy table to exactly the same access level as specified by user. If TRUE then only the acce… |
| 1.3.6.1.4.1.2272.1.1.61.1.16 | ColumnrcSysAccessPolicyNetInetAddrType | read-write | current | Source network Inet Address Type. |
| 1.3.6.1.4.1.2272.1.1.61.1.17 | ColumnrcSysAccessPolicyNetInetAddress | read-write | current | Source network Inet Address (prefix/network). |
| 1.3.6.1.4.1.2272.1.1.61.1.18 | ColumnrcSysAccessPolicyNetInetAddrPrefixLen | read-write | current | Source network Inet Address Prefix-Length/Mask. |
| 1.3.6.1.4.1.2272.1.1.61.1.19 | ColumnrcSysAccessPolicyTrustedHostInetAddress | read-write | current | Trusted Inet address of host performing a rlogin into the device. |
| 1.3.6.1.4.1.2272.1.1.62 | TablercSysTrapSenderTable | not-accessible | current | The trap sender table (0 to 25 entries). This table lists the addresses of Network Management Stations and the Source Address that should receive trap messages… |
| 1.3.6.1.4.1.2272.1.1.62.1 | RowrcSysTrapSenderEntry | not-accessible | current | A trap sender table entry. |
| 1.3.6.1.4.1.2272.1.1.62.1.1 | ColumnrcSysTrapSenderRecvAddress | read-only | current | IP address for trap receiver. |
| 1.3.6.1.4.1.2272.1.1.62.1.2 | ColumnrcSysTrapSenderSrcAddress | read-write | current | IP address for trap sender. |
| 1.3.6.1.4.1.2272.1.1.64 | TablercSysDnsServerListTable | not-accessible | current | DNS serever list table used to store the details of the DNS server configured. |
| 1.3.6.1.4.1.2272.1.1.64.1 | RowrcSysDnsServerListEntry | not-accessible | current | table entry. |
| 1.3.6.1.4.1.2272.1.1.64.1.1 | ColumnrcSysDnsServerListType | read-only | current | Type of the DNS server |
| 1.3.6.1.4.1.2272.1.1.64.1.3 | ColumnrcSysDnsServerListStatus | read-only | current | Status of DNS server |
| 1.3.6.1.4.1.2272.1.1.64.1.4 | ColumnrcSysDnsServerListRequestCount | read-only | current | Number of request send to this server |
| 1.3.6.1.4.1.2272.1.1.64.1.5 | ColumnrcSysDnsServerListSuccessCount | read-only | current | Number of request send to this server which are successful |
| 1.3.6.1.4.1.2272.1.1.64.1.6 | ColumnrcSysDnsServerListRowStatus | read-write | current | Used to create/delete DNS server entries in rcSysDnsServerListTable. |
| 1.3.6.1.4.1.2272.1.1.64.1.7 | ColumnrcSysDnsServerListAddressType | read-write | current | The address type of DNS Server. |
| 1.3.6.1.4.1.2272.1.1.64.1.8 | ColumnrcSysDnsServerListAddress | read-write | current | The address of the DNS Server |
| 1.3.6.1.4.1.2272.1.1.65 | TablercSysDnsHostTable | not-accessible | current | DNS Host table. |
| 1.3.6.1.4.1.2272.1.1.65.1 | RowrcSysDnsHostEntry | not-accessible | current | table entry. |
| 1.3.6.1.4.1.2272.1.1.65.1.1 | ColumnrcSysDnsHostData | read-only | current | Host Name or Host IP Address. |
| 1.3.6.1.4.1.2272.1.1.65.1.2 | ColumnrcSysDnsHostName | read-only | current | Host Name. |
| 1.3.6.1.4.1.2272.1.1.65.1.4 | ColumnrcSysDnsHostSource | read-only | obsolete | DNS Server IP or /etc/host file. |
| 1.3.6.1.4.1.2272.1.1.65.1.5 | ColumnrcSysDnsHostAddressType | read-only | current | Address Type of the Host. |
| 1.3.6.1.4.1.2272.1.1.65.1.6 | ColumnrcSysDnsHostAddress | read-only | current | Address of the Host. |
| 1.3.6.1.4.1.2272.1.1.66 | ScalarrcSysMsgLogFrequency | read-only | current | Used to specify the maximum frequency/count of the occurence of the Log Message. |
| 1.3.6.1.4.1.2272.1.1.67 | ScalarrcSysMsgLogText | read-only | current | A textual string containing the first four characters of the Log Message. |
| 1.3.6.1.4.1.2272.1.1.68 | ScalarrcSysForceIpHdrSender | read-write | current | Flag to decide if IP header source address will be matched with SNMP header sender networks. |
| 1.3.6.1.4.1.2272.1.1.70 | ScalarrcSysDnsDomainName | read-write | current | Default domain used for querying the DNS Server. |
| 1.3.6.1.4.1.2272.1.1.71 | ScalarrcSysDnsServerListIpAddr | read-only | current | DNS server's IP address |
| 1.3.6.1.4.1.2272.1.1.72 | ScalarrcSysDnsRequestType | read-only | current | DNS Type: Whether it was Dns Request or a Response |
| 1.3.6.1.4.1.2272.1.1.73 | ScalarrcSysSpanningTreeOperMode | read-only | current | This object indicates the current spanning-tree mode of the system. The meaning of specific values is: nortelStpg(1) .. The older proprietary mode which suppor… |
| 1.3.6.1.4.1.2272.1.1.74 | ScalarrcSysSpanningTreeAdminMode | read-write | current | This object indicates the desired spanning-tree mode of the system. The meaning of specific values is: nortelStpg(1) .. The older proprietary mode which suppor… |
| 1.3.6.1.4.1.2272.1.1.75 | ScalarrcSysAutoRecoverDelay | read-write | current | Time interval in seconds after which auto-recovery runs on ports to clear action taken by cp-limit, link flap or loop detect |
| 1.3.6.1.4.1.2272.1.1.76 | ScalarrcSysMacFlapLimitTime | read-write | current | Time limit in milliseconds for MAC flapping for loop-detect feature |
| 1.3.6.1.4.1.2272.1.1.77 | ScalarrcSysMacFlapLimitCount | read-only | current | Number of times mac flapping can happen for loop-detect feature |
| 1.3.6.1.4.1.2272.1.1.78 | ScalarrcSysExtCplimitEnable | read-write | current | enable or disable extended CP-LIMIT in system. |
| 1.3.6.1.4.1.2272.1.1.79 | ScalarrcSysExtCplimitMinCongTime | read-write | current | Minimum time for which System octapid should be congested to trigger congestion algorithm for extended CP-LIMIT in mSecs |
| 1.3.6.1.4.1.2272.1.1.80 | ScalarrcSysExtCplimitMaxPorts | read-write | current | Maximum number of ports which need to be monitored for congestion in Extended CP-LIMIT |
| 1.3.6.1.4.1.2272.1.1.81 | ScalarrcSysExtCplimitPortCongTime | read-write | current | Minimum time for which ingress traffic utilization rate of a monitored port should stay more than the allowed limits in order to disable the port for extended … |
| 1.3.6.1.4.1.2272.1.1.82 | ScalarrcSysExtCplimitTrapLevel | read-write | current | Indicates the trap level for extended CP-LIMIT |
| 1.3.6.1.4.1.2272.1.1.83 | ScalarrcSysExtCplimitSysOctapidCongested | read-only | current | Indicates whether system octapid congestion detected for extended cp-limit |
| 1.3.6.1.4.1.2272.1.1.84 | ScalarrcSysExtCplimitPortsMonitored | read-only | current | Indicates whether ports has been shutdown due to extended cp-limit |
| 1.3.6.1.4.1.2272.1.1.85 | ScalarrcSysExtCplimitPortsShutDown | read-only | current | Indicates whether ports has been shutdown due to extended Cp-limit |
| 1.3.6.1.4.1.2272.1.1.86 | ScalarrcSysActionL1 | read-write | current | Initiate a system action for layer1 user |
| 1.3.6.1.4.1.2272.1.1.87 | ScalarrcSysActionL2 | read-write | current | Initiate a system action for layer2 user |
| 1.3.6.1.4.1.2272.1.1.88 | ScalarrcSysActionL3 | read-write | current | Initiate a system action for layer3 user |
| 1.3.6.1.4.1.2272.1.1.89 | ScalarrcSysActionRwa | read-write | current | Initiate a system action. |
| 1.3.6.1.4.1.2272.1.1.90 | ScalarrcSysPowerUsage | read-only | current | The current power usage for the whole chassis. |
| 1.3.6.1.4.1.2272.1.1.91 | ScalarrcSysPowerAvailable | read-only | current | The current power available for the whole chassis. |
| 1.3.6.1.4.1.2272.1.1.94 | TablercSysFrcMsgControlTable | not-accessible | current | Management Force-msg Control table. This table is used to specify the pattern for Force-msg Control |
| 1.3.6.1.4.1.2272.1.1.94.1 | RowrcSysFrcMsgControlEntry | not-accessible | current | A Force-msg Control table entry. |
| 1.3.6.1.4.1.2272.1.1.94.1.1 | ColumnrcSysFrcMsgControlPatternId | not-accessible | current | Pattern Id. |
| 1.3.6.1.4.1.2272.1.1.94.1.2 | ColumnrcSysFrcMsgControlPattern | read-write | current | Pattern for filtering the force-msg for msg control |
| 1.3.6.1.4.1.2272.1.1.94.1.3 | ColumnrcSysFrcMsgControlRowStatus | read-write | current | Used to create/delete an entry |
| 1.3.6.1.4.1.2272.1.1.95 | TablercSysAccPolSnmpGrpTable | not-accessible | current | SNMP group list for access policy |
| 1.3.6.1.4.1.2272.1.1.95.1 | RowrcSysAccPolSnmpGrpEntry | not-accessible | current | The table entry which covers the groups under snmp service. |
| 1.3.6.1.4.1.2272.1.1.95.1.1 | ColumnrcSysAccPolSnmpGrpName | not-accessible | current | The snmp-v3 group name |
| 1.3.6.1.4.1.2272.1.1.95.1.2 | ColumnrcSysAccPolSnmpGrpModel | not-accessible | current | The snmp model |
| 1.3.6.1.4.1.2272.1.1.95.1.3 | ColumnrcSysAccPolSnmpGrpRowStatus | read-write | current | Row status |
| 1.3.6.1.4.1.2272.1.1.96 | ScalarrcSysVirtualIpv6Addr | read-write | current | Virtual IP is an IP address that owned and advertised only by the master CPU. So whichever CPU is master registers this IP address. |
| 1.3.6.1.4.1.2272.1.1.97 | ScalarrcSysVirtualIpv6PrefixLength | read-write | current | The length of the virtual ipv6 addr prefix (in bits). |
| 1.3.6.1.4.1.2272.1.1.100 | ScalarrcSysLicenseTrialDaysLeft | read-only | current | This indicates days left before License Trial Period will expire. |
| 1.3.6.1.4.1.2272.1.1.116 | ScalarrcSysTotalPower | read-only | current | The total power for the whole chassis. |
| 1.3.6.1.4.1.2272.1.1.117 | ScalarrcSysRedundantPower | read-only | current | Used to indicate the redundant power on the chassis. The redundant power is per power supply unit |
| 1.3.6.1.4.1.2272.1.1.118 | ScalarrcSysAuthSuccessTrapEnable | read-write | current | Used to enable/disable the trap send for authenticaion success trap rcnAuthenticationSuccess. It only allow to be set when snmpEnableAuthenTraps is enabled. I … |
| 1.3.6.1.4.1.2272.1.1.119 | ScalarrcSysUdpSrcByVirtualIpEnable | read-write | current | Used to enable/disable virtual ip as udp source. |
| 1.3.6.1.4.1.2272.1.2 | NodercTftp | |||
| 1.3.6.1.4.1.2272.1.2.1 | ScalarrcTftpHost | read-write | current | Name of source/destination host for the TFTP transfer. |
| 1.3.6.1.4.1.2272.1.2.2 | ScalarrcTftpFile | read-write | current | Name of file for the TFTP transfer. |
| 1.3.6.1.4.1.2272.1.2.3 | ScalarrcTftpAction | read-write | current | The action for the TFTP transfer. |
| 1.3.6.1.4.1.2272.1.2.4 | ScalarrcTftpResult | read-only | current | Contains result of the last Tftp action request. |
| 1.3.6.1.4.1.2272.1.3 | NodercVlan | |||
| 1.3.6.1.4.1.2272.1.3.1 | ScalarrcVlanNumVlans | read-only | current | The number of VLANs currently defined in the switch. |
| 1.3.6.1.4.1.2272.1.3.2 | TablercVlanTable | not-accessible | current | A list of Virtual LAN entries. The number of entries is given by rcVlanNumVlans. |
| 1.3.6.1.4.1.2272.1.3.2.1 | RowrcVlanEntry | not-accessible | current | Entry containing configuration information for a particular Virtual LAN. The relationship between the various port sets in a VLAN Entry are : o The set of port… |
| 1.3.6.1.4.1.2272.1.3.2.1.1 | ColumnrcVlanId | read-only | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.3.2.1.2 | ColumnrcVlanName | read-write | current | An administratively-assigned name for this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.3 | ColumnrcVlanColor | read-write | current | An administratively-assigned color code for this VLAN. The value of this object is used by the VLAN Manager GUI tool to select a color when it draws this VLAN … |
| 1.3.6.1.4.1.2272.1.3.2.1.6 | ColumnrcVlanIfIndex | read-only | current | When rcVlanRoutingEnable is set to true(1), this value indicates the 'logical' ifIndex assigned to this VLAN. Otherwise, this value is meaningless and should b… |
| 1.3.6.1.4.1.2272.1.3.2.1.7 | ColumnrcVlanAction | read-write | current | VLAN related actions. |
| 1.3.6.1.4.1.2272.1.3.2.1.8 | ColumnrcVlanResult | read-only | current | The result from the last VLAN action. |
| 1.3.6.1.4.1.2272.1.3.2.1.9 | ColumnrcVlanStgId | read-write | current | Indicates the Spanning Tree Group (STG) used by this VLAN to determine the state of its ports. If this VLAN is not associated with any STG, this value should b… |
| 1.3.6.1.4.1.2272.1.3.2.1.10 | ColumnrcVlanType | read-write | current | The type of VLAN, distinguished according to the policy used to define its port membership. VSP9000 does not support bySvlan(6) and ByIds(7). |
| 1.3.6.1.4.1.2272.1.3.2.1.11 | ColumnrcVlanPortMembers | read-write | current | The set of ports that are members (static or dynamic) of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.12 | ColumnrcVlanActiveMembers | read-only | current | The set of ports that are currently active in this VLAN. Active ports include all static ports and any dynamic ports where the VLAN policy was met. |
| 1.3.6.1.4.1.2272.1.3.2.1.13 | ColumnrcVlanStaticMembers | read-write | current | The set of ports that are static members of this VLAN. A static member of a VLAN is always active and is never aged out. |
| 1.3.6.1.4.1.2272.1.3.2.1.14 | ColumnrcVlanNotAllowToJoin | read-write | current | The set of ports that are not allowed to become members of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.15 | ColumnrcVlanProtocolId | read-write | current | The protocol identifier of this VLAN. This value is meaningful only if rcVlanType is equal to byProtocolId(3). For other VLAN types it should have the value no… |
| 1.3.6.1.4.1.2272.1.3.2.1.16 | ColumnrcVlanSubnetAddr | read-write | current | The IP subnet address of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.… |
| 1.3.6.1.4.1.2272.1.3.2.1.17 | ColumnrcVlanSubnetMask | read-write | current | The IP subnet mask of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0. |
| 1.3.6.1.4.1.2272.1.3.2.1.18 | ColumnrcVlanAgingTime | read-write | current | The timeout period (in seconds) used for aging out dynamic members of this VLAN. This field is only relevant for policy-based VLANs. |
| 1.3.6.1.4.1.2272.1.3.2.1.19 | ColumnrcVlanMacAddress | read-only | current | The MAC address assigned to the virtual router interface of this VLAN. This field is meaningful only if rcVlanRoutingEnable is equal to true(1). |
| 1.3.6.1.4.1.2272.1.3.2.1.20 | ColumnrcVlanRowStatus | read-write | current | Used to create/delete entries in the rcVlanTable. |
| 1.3.6.1.4.1.2272.1.3.2.1.26 | ColumnrcVlanUserDefinedPid | read-write | current | When rcVlanProtocolId is set to usrDefined(15) in a protocol-based VLAN, this field represents the 16-bit user defined protocol identifier. |
| 1.3.6.1.4.1.2272.1.3.2.1.28 | ColumnrcVlanProtocolIds | read-write | current | Bitfield of protocol ids. |
| 1.3.6.1.4.1.2272.1.3.2.1.34 | ColumnrcVlanTosValue | read-write | current | Tos value. |
| 1.3.6.1.4.1.2272.1.3.2.1.35 | ColumnrcVlanEncap | read-write | current | This is the encapsulation type for userdefined protocol based vlans. This is not meaningful for other types of vlan. The default value is null. |
| 1.3.6.1.4.1.2272.1.3.2.1.37 | ColumnrcVlanFdbAging | read-write | current | The timeout period (in seconds) used for aging out fdb entries of this VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.44 | ColumnrcVlanOspfPassivePortMember | read-write | current | The set of ports in the vlan that are designated as ospf passive |
| 1.3.6.1.4.1.2272.1.3.2.1.46 | ColumnrcVlanNlbMode | read-write | current | NLB mode set on a VLAN. |
| 1.3.6.1.4.1.2272.1.3.2.1.48 | ColumnrcVlanVrfId | read-write | current | Indicates the Virtual Router to which the VLAN belongs |
| 1.3.6.1.4.1.2272.1.3.2.1.49 | ColumnrcVlanVrfName | read-only | current | The Name of the Virtual Router to which the VLAN belongs |
| 1.3.6.1.4.1.2272.1.3.2.1.54 | ColumnrcVlanNodalMepList | read-write | current | List of nodal Meps assigned to this vlan. A mep consists of Domain Name, Association name and Mep Id separated by '.'. Each meps is separated by ',': <md1>.<ma… |
| 1.3.6.1.4.1.2272.1.3.2.1.55 | ColumnrcVlanNumOfNodalMep | read-only | current | Number of nodal meps assigned to this vlan |
| 1.3.6.1.4.1.2272.1.3.2.1.56 | ColumnrcVlanNodalMipLevelList | read-write | current | List of nodal Mip levels assigned to this vlan that allows Mip functionality to be enabled on a per level per vlan basis. A mip level is represented by an inte… |
| 1.3.6.1.4.1.2272.1.3.2.1.57 | ColumnrcVlanNumOfNodalMipLevel | read-only | current | Number of nodal mip levels assigned to this vlan that allows MIP functionality to be enabled on a per level per vlan basis. |
| 1.3.6.1.4.1.2272.1.3.2.1.61 | ColumnrcVlanPlsbIsid | read-write | current | Plsb i-sid number assigned to a C-vlan. Default 0 value indicates that no i-sid has been assinged. |
| 1.3.6.1.4.1.2272.1.3.3 | TablercVlanPortTable | not-accessible | current | A table used to maintain VLAN port related information. |
| 1.3.6.1.4.1.2272.1.3.3.1 | RowrcVlanPortEntry | not-accessible | current | Entry containing VLAN information regarding a particular port. |
| 1.3.6.1.4.1.2272.1.3.3.1.1 | ColumnrcVlanPortIndex | read-only | current | An unique index used to identify a particular port in the system. This index is equal to the ifIndex of the port. |
| 1.3.6.1.4.1.2272.1.3.3.1.2 | ColumnrcVlanPortNumVlanIds | read-only | current | Used to indicate the number of VLAN IDs that are stored in the rcVlanPortVlanIds variable. |
| 1.3.6.1.4.1.2272.1.3.3.1.4 | ColumnrcVlanPortType | read-write | current | The type of port: access(1) or trunk(2). |
| 1.3.6.1.4.1.2272.1.3.3.1.5 | ColumnrcVlanPortDiscardTaggedFrames | read-write | current | A flag used to determine how to process tagged frames received on this access port. When the flag is set, these frames are discarded by the forwarding process.… |
| 1.3.6.1.4.1.2272.1.3.3.1.6 | ColumnrcVlanPortDiscardUntaggedFrames | read-write | current | A flag used to determine how to process untagged frames received on this trunk port. When the flag is set, these frames are discarded by the forwarding process… |
| 1.3.6.1.4.1.2272.1.3.3.1.7 | ColumnrcVlanPortDefaultVlanId | read-write | current | The VLAN ID assigned to untagged frames received on this trunk port. This field is meaningless when the port is not a trunk port. |
| 1.3.6.1.4.1.2272.1.3.3.1.8 | ColumnrcVlanPortPerformTagging | read-write | current | Enable/disable the port on the current vlan to perform tagging on the incoming and outgoing traffic. |
| 1.3.6.1.4.1.2272.1.3.3.1.10 | ColumnrcVlanPortLoopDetect | read-write | current | Enable/disable loop detection on this port |
| 1.3.6.1.4.1.2272.1.3.3.1.11 | ColumnrcVlanPortFirstPortInOpid | read-only | current | This value gives the IfIndex of the first port in the octapid. This value is used to generate an error message when changing port type from normal to uni/nni a… |
| 1.3.6.1.4.1.2272.1.3.3.1.12 | ColumnrcVlanPortLastPortInOpid | read-only | current | This value gives the IfIndex of the first port in the octapid. This value is used to generate an error message when changing port type from normal to uni/nni a… |
| 1.3.6.1.4.1.2272.1.3.3.1.13 | ColumnrcVlanPortUntagDefaultVlan | read-write | current | enable/disable Egress Tagging on the Default Vlan of the port. |
| 1.3.6.1.4.1.2272.1.3.3.1.14 | ColumnrcVlanPortLoopDetectAction | read-write | current | This value is used to specify the action which needs to be taken once a loop is detected on a specific port. VlanBlock is not supported in VSP9000. |
| 1.3.6.1.4.1.2272.1.3.3.1.15 | ColumnrcVlanPortArpDetect | read-write | current | Enable/disable Arp detection on this port |
| 1.3.6.1.4.1.2272.1.3.3.1.16 | ColumnrcVlanPortSpoofDetect | read-write | current | Enable/disable spoof detection on this port |
| 1.3.6.1.4.1.2272.1.3.3.1.18 | ColumnrcVlanPortClassificationSubnet | read-write | current | Enable/disable Subnet based Vlan packets on this port. |
| 1.3.6.1.4.1.2272.1.3.3.1.19 | ColumnrcVlanPortClassificationProtocol | read-write | current | Enable/disable Protocol based Vlan packets on this port. |
| 1.3.6.1.4.1.2272.1.3.3.1.20 | ColumnrcVlanPortClassificationPrec | read-write | current | Sets the precedence for vlan classification. A value of 1 puts classification of packets to source mac vlans ahead of subnet based vlans. A value of 2 puts sub… |
| 1.3.6.1.4.1.2272.1.3.3.1.21 | ColumnrcVlanPortVlanIdList | read-write | current | This bitfield is used to identify which VLANs this port is assigned to. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vlan I… |
| 1.3.6.1.4.1.2272.1.3.3.1.22 | ColumnrcVlanPortClassificationSourceMac | read-write | current | Enable/disable SourceMac based Vlan packets on this port. |
| 1.3.6.1.4.1.2272.1.3.4 | TablercVlanMacTable | not-accessible | current | A table used to maintain MAC addresses assigned to a particular VLAN by MAC address. |
| 1.3.6.1.4.1.2272.1.3.4.1 | RowrcVlanMacEntry | not-accessible | current | Entry containing VLAN information regarding a particular port. |
| 1.3.6.1.4.1.2272.1.3.4.1.1 | ColumnrcVlanMacVlanId | read-only | current | An unique index used to identify a VLAN (by MAC address) in the system. |
| 1.3.6.1.4.1.2272.1.3.4.1.2 | ColumnrcVlanMacAddr | read-only | current | An unique index used to identify a MAC address assigned to a particular VLAN. |
| 1.3.6.1.4.1.2272.1.3.4.1.3 | ColumnrcVlanMacRowStatus | read-write | current | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.3.5 | ScalarrcVlanIgmpSnoopNumGroups | read-only | current | The number of entries (rows) in the rcVlanIgmpSnoopTable. |
| 1.3.6.1.4.1.2272.1.3.10 | TablercVlanLoopDetectedTable | not-accessible | current | A list of Vlans the port belongs to and the corresponding loop detected status. |
| 1.3.6.1.4.1.2272.1.3.10.1 | RowrcVlanLoopDetectedEntry | not-accessible | current | Loop-Detected Entry. |
| 1.3.6.1.4.1.2272.1.3.10.1.1 | ColumnrcVlanLoopDetectedPortIndex | read-only | current | Port Number. |
| 1.3.6.1.4.1.2272.1.3.10.1.2 | ColumnrcVlanLoopDetectedVlanId | read-only | current | Gives the VlanId to which the port belongs. |
| 1.3.6.1.4.1.2272.1.3.10.1.3 | ColumnrcVlanLoopDetectedValue | read-only | current | Gives the Loop Detected status of the port in a vlan. |
| 1.3.6.1.4.1.2272.1.3.11 | TablercVlanDsapSsapTable | not-accessible | current | A table used to maintain DSAP/SSAP values assigned to a sna802dot2 or userdefined vlan. |
| 1.3.6.1.4.1.2272.1.3.11.1 | RowrcVlanDsapSsapEntry | not-accessible | current | An entry in the rcVlanDsapSsap table. |
| 1.3.6.1.4.1.2272.1.3.11.1.1 | ColumnrcVlanDsapSsapVlanId | not-accessible | current | A unique index to identify a vlan. |
| 1.3.6.1.4.1.2272.1.3.11.1.2 | ColumnrcVlanDsapSsapPid | not-accessible | current | Values of DSAP/SSAP assigned to a particular vlan. |
| 1.3.6.1.4.1.2272.1.3.11.1.3 | ColumnrcVlanDsapSsapRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.2272.1.3.12 | TablercVlanNewLoopDetectedTable | not-accessible | current | A list of Vlans the port belongs to and the corresponding loop detected status. |
| 1.3.6.1.4.1.2272.1.3.12.1 | RowrcVlanNewLoopDetectedEntry | not-accessible | current | Loop-Detected Entry. |
| 1.3.6.1.4.1.2272.1.3.12.1.1 | ColumnrcVlanNewLoopDetectedPortIndex | not-accessible | current | Port Number. |
| 1.3.6.1.4.1.2272.1.3.12.1.2 | ColumnrcVlanNewLoopDetectedVlanId | not-accessible | current | Gives the VlanId to which the port belongs. |
| 1.3.6.1.4.1.2272.1.3.12.1.3 | ColumnrcVlanNewLoopDetectedMac | not-accessible | current | Mac address |
| 1.3.6.1.4.1.2272.1.3.12.1.4 | ColumnrcVlanNewLoopDetectedAction | read-only | current | This value is used to specify the action which needs to be taken once a loop is detected on a specific port. |
| 1.3.6.1.4.1.2272.1.3.12.1.5 | ColumnrcVlanNewLoopDetectedSmltRemote | read-only | current | A MAC address indicate for remote learnt, either local or remote. |
| 1.3.6.1.4.1.2272.1.4 | NodercChassis | |||
| 1.3.6.1.4.1.2272.1.4.1 | ScalarrcChasType | read-only | current | Chassis Type |
| 1.3.6.1.4.1.2272.1.4.2 | ScalarrcChasSerialNumber | read-only | current | Unique serial number for this chassis. |
| 1.3.6.1.4.1.2272.1.4.3 | ScalarrcChasHardwareRevision | read-only | current | Device hardware revision level |
| 1.3.6.1.4.1.2272.1.4.4 | ScalarrcChasNumSlots | read-only | current | The number of slots in the chassis available for plug-in cards. |
| 1.3.6.1.4.1.2272.1.4.5 | ScalarrcChasNumPorts | read-only | current | The total number of ports currently installed in the chassis. |
| 1.3.6.1.4.1.2272.1.4.7 | NodercChasFan | |||
| 1.3.6.1.4.1.2272.1.4.7.2 | TablercChasFanZoneTable | not-accessible | current | Table for the zones available on the chassis |
| 1.3.6.1.4.1.2272.1.4.7.2.1 | RowrcChasFanZoneEntry | not-accessible | current | Contains information regarding a zone unit |
| 1.3.6.1.4.1.2272.1.4.7.2.1.1 | ColumnrcChasFanZoneType | not-accessible | current | Type of the fan zone. |
| 1.3.6.1.4.1.2272.1.4.7.2.1.2 | ColumnrcChasFanZoneMode | read-only | current | Functional mode of the fan zone. |
| 1.3.6.1.4.1.2272.1.4.7.2.1.3 | ColumnrcChasFanZoneModeStatus | read-only | current | Bit set indicates the alarm type(s) |
| 1.3.6.1.4.1.2272.1.4.7.2.1.4 | ColumnrcChasFanZoneAlarmTimer | read-only | current | Alarm timer indicates the remaining time before system checks and shutdown module when fan is in the alarm state. Zero means the fan i snot in an alarm state |
| 1.3.6.1.4.1.2272.1.4.7.2.1.5 | ColumnrcChasFanZoneTemperature | read-only | current | Highest temperature measured in celsius degree from all the sensors (inlet and outlet) in the zone |
| 1.3.6.1.4.1.2272.1.4.7.2.1.6 | ColumnrcChasFanZoneTray1LedColor | read-only | current | Led color indicate fans operation status on tray off: Indicates no tray or power off. green: Indicates all fans are operational in a tray. red: Front Zone Tray… |
| 1.3.6.1.4.1.2272.1.4.7.2.1.7 | ColumnrcChasFanZoneTray2LedColor | read-only | current | Led color indicate fans operation status on tray off: Indicates no tray or power off. green: Indicates all fans are operational in a tray. red: Front Zone Tray… |
| 1.3.6.1.4.1.2272.1.4.7.3 | TablercChasFanInfoTable | not-accessible | current | This table contains information for all the fans on the chassis |
| 1.3.6.1.4.1.2272.1.4.7.3.1 | RowrcChasFanInfoEntry | not-accessible | current | Contains information regarding a fan unit |
| 1.3.6.1.4.1.2272.1.4.7.3.1.1 | ColumnrcChasFanInfoTray | not-accessible | current | Number of trays per zone in chassis |
| 1.3.6.1.4.1.2272.1.4.7.3.1.2 | ColumnrcChasFanInfoFan | not-accessible | current | Number of fans per tray |
| 1.3.6.1.4.1.2272.1.4.7.3.1.3 | ColumnrcChasFanInfoExpectedSpeed | read-only | current | The administrative setting for the fan speed low: Low speed set by software medium: Medium speed set by software high: High speed set by software hardware: Spe… |
| 1.3.6.1.4.1.2272.1.4.7.3.1.4 | ColumnrcChasFanInfoOperSpeed | read-only | current | Actual speed of the fan |
| 1.3.6.1.4.1.2272.1.4.7.3.1.5 | ColumnrcChasFanInfoStatus | read-only | current | The operational status of the fan. Details below: ok(1): Fan operating under normal condition(s) faulty(2): Fan not operating as expected |
| 1.3.6.1.4.1.2272.1.4.8 | NodercChasPowerSupply | |||
| 1.3.6.1.4.1.2272.1.4.8.1 | TablercChasPowerSupplyTable | not-accessible | current | This table contains information about power supplies. |
| 1.3.6.1.4.1.2272.1.4.8.1.1 | RowrcChasPowerSupplyEntry | not-accessible | current | Contains information regarding a power supply unit. |
| 1.3.6.1.4.1.2272.1.4.8.1.1.1 | ColumnrcChasPowerSupplyId | read-only | current | The power supply Id. |
| 1.3.6.1.4.1.2272.1.4.8.1.1.2 | ColumnrcChasPowerSupplyOperStatus | read-only | current | Actual status of the power supply: - unknown(1) - status can not be determined. - empty(2) - power supply not installed. - up(3) - present and supplying power.… |
| 1.3.6.1.4.1.2272.1.4.8.2 | TablercChasPowerSupplyDetailTable | not-accessible | current | This table contains detailed information about power supplies. |
| 1.3.6.1.4.1.2272.1.4.8.2.1 | RowrcChasPowerSupplyDetailEntry | not-accessible | current | Contains detailed info regarding a power supply unit. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.1 | ColumnrcChasPowerSupplyDetailId | read-only | current | The power supply Id. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.2 | ColumnrcChasPowerSupplyDetailType | read-only | current | The power supply type. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.3 | ColumnrcChasPowerSupplyDetailSerialNumber | read-only | current | The power supply serial number. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.4 | ColumnrcChasPowerSupplyDetailHardwareRevision | read-only | current | The hardware revision of the power supply. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.5 | ColumnrcChasPowerSupplyDetailPartNumber | read-only | current | The power supply part number. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.6 | ColumnrcChasPowerSupplyDetailDescription | read-only | current | The detail description of power supply. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.8 | ColumnrcChasPowerSupplyDetailInputLineVoltage | read-only | current | The power supply Input Line voltage. |
| 1.3.6.1.4.1.2272.1.4.8.2.1.10 | ColumnrcChasPowerSupplyDetailOutputWatts | read-only | current | The output power of this power supply |
| 1.3.6.1.4.1.2272.1.4.9 | NodercCard | |||
| 1.3.6.1.4.1.2272.1.4.9.1 | TablercCardTable | not-accessible | current | A table that contains information about the cards in this chassis. For those slots that do not contain a physical card, the table may be implemented to contain… |
| 1.3.6.1.4.1.2272.1.4.9.1.1 | RowrcCardEntry | not-accessible | current | Card attributes |
| 1.3.6.1.4.1.2272.1.4.9.1.1.1 | ColumnrcCardIndex | read-only | current | A unique value for each module within the chassis. This value is determined by the chassis slot number where the module is inserted. Valid entries are 1 to the… |
| 1.3.6.1.4.1.2272.1.4.9.1.1.2 | ColumnrcCardType | read-only | current | Used to indicate the card type. The value returned is defined by the description in rc2kCardTable. |
| 1.3.6.1.4.1.2272.1.4.9.1.1.9 | ColumnrcCardOxateCpld | read-only | current | Oxate CPLD version for CP card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.10 | ColumnrcCardOxideFpga | read-only | current | Oxide FGPA version for CP card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.11 | ColumnrcCardCatskillFpga | read-only | current | Catskill FPGA version for CP card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.12 | ColumnrcCardQE | read-only | current | QE version for CP card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.13 | ColumnrcCardK2Fpga | read-only | current | K2 FPGA version for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.14 | ColumnrcCardIoDateDC | read-only | current | IO Date DC CPLD for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.15 | ColumnrcCardIoDateBB | read-only | current | IO Date BaseBoard CPLD for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.16 | ColumnrcCardIoPimCpld | read-only | current | IO PIM CPLD for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.17 | ColumnrcCardLed0Cpld | read-only | current | LED0 CPLD for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.18 | ColumnrcCardLed1Cpld | read-only | current | LED1 CPLD for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.19 | ColumnrcCardZagrosFpga | read-only | current | Zagros FPGA for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.20 | ColumnrcCardRsp | read-only | current | RSP for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.21 | ColumnrcCardBcmMac | read-only | current | BCM Mac for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.22 | ColumnrcCardPhosphideFpga | read-only | current | Phosphide FPGA for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.23 | ColumnrcCardSulfideFpga | read-only | current | Sulfide FPGA for IO card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.24 | ColumnrcCardFluorateCpld | read-only | current | Fluorate Cpld for SF card |
| 1.3.6.1.4.1.2272.1.4.9.1.1.25 | ColumnrcCardBme | read-only | current | BME for SF card |
| 1.3.6.1.4.1.2272.1.4.10 | NodercPort | |||
| 1.3.6.1.4.1.2272.1.4.10.1 | TablercPortTable | not-accessible | current | Port table |
| 1.3.6.1.4.1.2272.1.4.10.1.1 | RowrcPortEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.1 | ColumnrcPortIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.2 | ColumnrcPortType | read-only | current | Port type |
| 1.3.6.1.4.1.2272.1.4.10.1.1.6 | ColumnrcPortAction | read-write | current | Port related actions. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.7 | ColumnrcPortResult | read-only | current | Result from the last Vlan action. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.11 | ColumnrcPortAutoNegotiate | read-write | current | Indicate whether this port enabled for auto negotiations or not. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.12 | ColumnrcPortAdminDuplex | read-write | current | Indicates the port duplex type |
| 1.3.6.1.4.1.2272.1.4.10.1.1.13 | ColumnrcPortOperDuplex | read-only | current | Indicate this port's current duplex value. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.14 | ColumnrcPortAdminSpeed | read-write | current | Indicate this port's speed. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.15 | ColumnrcPortOperSpeed | read-only | current | Indicate this port's current speed value. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.16 | ColumnrcPortMltId | read-only | current | Indicate which multi-link trunk (MLT) this port is assigned to. If this port is not associated with any MLT, this value will be set to zero(0). |
| 1.3.6.1.4.1.2272.1.4.10.1.1.17 | ColumnrcPortLocked | read-only | current | Indicate whether this port is locked. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.18 | ColumnrcPortAutoNegotiationSupported | read-only | current | Indicate whether this port can support auto-negotiation. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.19 | ColumnrcPortSingleRoutablePort | read-only | current | Indicate whether this port is a single routable port. If this value is true, the port functions like a traditional router port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.20 | ColumnrcPortUnknownMacDiscard | read-write | current | If rcUnknownMacDiscard is set to True, then a packet with an unknown source MAC address is dropped on that port, and other ports then will discard any packets … |
| 1.3.6.1.4.1.2272.1.4.10.1.1.21 | ColumnrcPortNumStateTransition | read-only | current | # state transitions. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.30 | ColumnrcPortQosLevel | read-write | current | Used to specify the Qos level packets, carried on this port, should be processed with. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.31 | ColumnrcPortDiffServEnable | read-write | current | Used to enable/disable the Differentiated Service feature on this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.32 | ColumnrcPortDiffServType | read-write | current | Used to specify the Differentiated Service type for this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.34 | ColumnrcPortVendorDescr | read-only | current | Used to show the name of the vendor of this port's connector. Only applicable to ports on a GBIC cards. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.35 | ColumnrcPortName | read-write | current | This port's name. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.43 | ColumnrcPortAdminRouting | read-write | current | Indicate whether the port is routable. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.44 | ColumnrcPortOperRouting | read-only | current | The status of the port whether is routable. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.46 | ColumnrcPortIeee8021POverrideEnable | read-write | current | Used to enable/disable IEEE 802.1P override. If it is enabled, 802.1p value from a tagged frame may not be honored. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.51 | ColumnrcPortHighSecureEnable | read-write | current | Enable/Disable high secure feature. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.55 | ColumnrcPortMrouteStrLimit | read-write | current | maximum number of multicast streams that are allowed to ingress to CPU through this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.56 | ColumnrcPortMrouteStrTimerCheck | read-write | current | sampling period to check number of multicast streams that has ingressed CPU through this port in seconds. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.57 | ColumnrcPortMrouteStrLimitEnable | read-write | current | enable or disable mroute stream limit on port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.62 | ColumnrcPortAutoNegAd | read-write | current | This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full … |
| 1.3.6.1.4.1.2272.1.4.10.1.1.64 | ColumnrcPortAutoRecoverPort | read-write | current | enable or disable auto recovery of port from action taken by cp-limit, link flap or loop detect features |
| 1.3.6.1.4.1.2272.1.4.10.1.1.67 | ColumnrcPortEgressRateLimit | read-write | current | Egress Rate Limit. for VSP 9000, range is 10000 to 10000000 |
| 1.3.6.1.4.1.2272.1.4.10.1.1.68 | ColumnrcPortEgressRateLimitState | read-write | current | Used to enable/disable shape/egress-rate-limit functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.85 | ColumnrcPortIngressRateLimit | read-write | current | Limits the amount of traffic from this Ingress port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.87 | ColumnrcPortVrfIdList | read-only | current | The set of VRF ids to which this port belongs. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.96 | ColumnrcPortVrfNameList | read-only | current | The set of VRF names to which this port belongs. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.97 | ColumnrcPortBrouterVrfId | read-write | current | Gives the VRF Id for this Brouter port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.98 | ColumnrcPortBrouterVrfName | read-only | current | Gives the VRF Name for this Brouter port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.99 | ColumnrcPortVrfCount | read-only | current | The total number of VRFs this port is associated to. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.108 | ColumnrcPortIngressRatePeak | read-write | current | Peak rate limit for this port. 0 means disable |
| 1.3.6.1.4.1.2272.1.4.10.1.1.109 | ColumnrcPortIngressRateSvc | read-write | current | Service rate limit for this port. 0 mean deisable |
| 1.3.6.1.4.1.2272.1.4.10.1.1.110 | ColumnrcPortCpLimitPktRate | read-write | current | Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.111 | ColumnrcPortCpLimitShutDownEnable | read-write | current | Used to indicate if the port should be shutdown when the CpLimitPktRate is exceeded. |
| 1.3.6.1.4.1.2272.1.4.10.2 | TablercPortPcapTable | not-accessible | current | Port pcap Table |
| 1.3.6.1.4.1.2272.1.4.10.2.1 | RowrcPortPcapEntry | not-accessible | current | Entry containing pcap info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.2.1.1 | ColumnrcPortPcapIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.4.10.2.1.2 | ColumnrcPortPcapEnable | read-write | current | To enable pcap for the port |
| 1.3.6.1.4.1.2272.1.4.10.2.1.3 | ColumnrcPortPcapMode | read-write | current | Mode in which pcap is enabled |
| 1.3.6.1.4.1.2272.1.4.10.4 | TablercPortLacpTable | not-accessible | current | Port LACP table |
| 1.3.6.1.4.1.2272.1.4.10.4.1 | RowrcPortLacpEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.4.1.1 | ColumnrcPortLacpAdminEnable | read-write | current | Administratively enable/disable LACP on a port |
| 1.3.6.1.4.1.2272.1.4.10.4.1.2 | ColumnrcPortLacpOperEnable | read-only | current | Indicates if LACP is operationally enabled or disabled on a port |
| 1.3.6.1.4.1.2272.1.4.10.4.1.3 | ColumnrcPortLacpFastPeriodicTime | read-write | current | The number of miliseconds between periodic transmissions using Short Timeouts. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.4 | ColumnrcPortLacpSlowPeriodicTime | read-write | current | The number of miliseconds between periodic transmissions using LONG Timeouts. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.5 | ColumnrcPortLacpTimeoutScale | read-write | current | Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale |
| 1.3.6.1.4.1.2272.1.4.10.4.1.6 | ColumnrcPortLacpAggrWaitTime | read-write | current | The number of mili seconds to delay aggregation to allow multiple links to aggregate simultaneously. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.7 | ColumnrcPortLacpFastPeriodicTimeOper | read-only | current | The operating value of fast periodic timer on the port. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.8 | ColumnrcPortLacpSlowPeriodicTimeOper | read-only | current | The operating value of slow periodic timer on the port. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.9 | ColumnrcPortLacpTimeoutScaleOper | read-only | current | The operating value of timeout scale on the port. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.10 | ColumnrcPortLacpAggrWaitTimeOper | read-only | current | The operating value of aggreagate wait time on port. |
| 1.3.6.1.4.1.2272.1.4.10.5 | TablercPortVLacpTable | not-accessible | current | Port Virtual LACP table |
| 1.3.6.1.4.1.2272.1.4.10.5.1 | RowrcPortVLacpEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.5.1.1 | ColumnrcPortVLacpAdminEnable | read-write | current | Administratively enable/disable Virtual LACP on a port |
| 1.3.6.1.4.1.2272.1.4.10.5.1.2 | ColumnrcPortVLacpOperEnable | read-only | current | Indicates if Virtual LACP is operationally enabled or disabled on a port |
| 1.3.6.1.4.1.2272.1.4.10.5.1.3 | ColumnrcPortVLacpFastPeriodicTimer | read-write | current | The number of miliseconds between periodic transmissions using Short Timeouts |
| 1.3.6.1.4.1.2272.1.4.10.5.1.4 | ColumnrcPortVLacpSlowPeriodicTimer | read-write | current | The number of miliseconds between periodic transmissions using LONG Timeouts. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.5 | ColumnrcPortVLacpTimeout | read-write | current | Timeout control value. Long or Short Timeout |
| 1.3.6.1.4.1.2272.1.4.10.5.1.6 | ColumnrcPortVLacpTimeoutScale | read-write | current | Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale |
| 1.3.6.1.4.1.2272.1.4.10.5.1.7 | ColumnrcPortVLacpEtherType | read-write | current | VLACP Protocol Identification. The id value is in Hex. Range in hex (0x600..0xffff) |
| 1.3.6.1.4.1.2272.1.4.10.5.1.8 | ColumnrcPortVLacpEtherMacAddress | read-write | current | Multicast Mac Address exclusively used for VLACPDU's |
| 1.3.6.1.4.1.2272.1.4.10.5.1.9 | ColumnrcPortVLacpPortState | read-only | current | Display the Vlacp Port State. |
| 1.3.6.1.4.1.2272.1.4.10.6 | TablercPortRemoteMirroringTable | not-accessible | current | Port Remote Mirroring Table |
| 1.3.6.1.4.1.2272.1.4.10.6.1 | RowrcPortRemoteMirroringEntry | not-accessible | current | Entry containing remote mirroring info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.6.1.1 | ColumnrcPortRemoteMirroringIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.4.10.6.1.2 | ColumnrcPortRemoteMirroringEnable | read-write | current | To enable remote Mirroring for the port |
| 1.3.6.1.4.1.2272.1.4.10.6.1.3 | ColumnrcPortRemoteMirroringMode | read-write | current | Mode in which remote mirroring is enabled |
| 1.3.6.1.4.1.2272.1.4.10.6.1.4 | ColumnrcPortRemoteMirroringSrcMac | read-write | current | Source Mac of the remote mirrored packet. Remote mirroring packet will be send with this source mac address |
| 1.3.6.1.4.1.2272.1.4.10.6.1.5 | ColumnrcPortRemoteMirroringDstMac | read-write | current | Destination Mac of the remote mirrored packet. Packets will be bridged to this mac address. Remote mirroring packet will be send to this mac address |
| 1.3.6.1.4.1.2272.1.4.10.6.1.6 | ColumnrcPortRemoteMirroringEtherType | read-write | current | Ethertype of the remote mirrored packet. Packets will be send with this ethertype |
| 1.3.6.1.4.1.2272.1.4.10.6.1.7 | ColumnrcPortRemoteMirroringVlanIdListSize | read-only | current | Used to indicate the number of VLAN IDs that are assigned to this port. |
| 1.3.6.1.4.1.2272.1.4.10.6.1.8 | ColumnrcPortRemoteMirroringVlanIdList | read-write | current | This field is used only if the port is assigned as remote mirroring termination port. Represents zero or more filter lists vlan in which the Destination Mac ad… |
| 1.3.6.1.4.1.2272.1.4.10.6.1.9 | ColumnrcPortRemoteMirroringRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.2272.1.4.10.13 | TablercPortLosslessEnetTable | not-accessible | current | Port Lossless Ethernet Table |
| 1.3.6.1.4.1.2272.1.4.10.13.1 | RowrcPortLosslessEnetEntry | not-accessible | current | Entry containing lossless Ethernet information for a particular port. |
| 1.3.6.1.4.1.2272.1.4.10.13.1.1 | ColumnrcPortLosslessEnetIndex | not-accessible | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. Lossless Ethernet will be limited to 10Gig ports. |
| 1.3.6.1.4.1.2272.1.4.10.13.1.2 | ColumnrcPortLosslessEnetConfigured | read-write | current | To enable lossless mode for the port |
| 1.3.6.1.4.1.2272.1.4.10.13.1.3 | ColumnrcPortLosslessEnetPauseType | read-write | current | Pause frame type. fc - Pause, pfc - priority-based flow control. |
| 1.3.6.1.4.1.2272.1.4.10.13.1.4 | ColumnrcPortLosslessEnetPfcBandwidth | read-write | current | Guaranteed bandwidth in Gbps when rcPortLosslessEnetPauseType is set to pfc(2). |
| 1.3.6.1.4.1.2272.1.4.11 | NodercPortLock | |||
| 1.3.6.1.4.1.2272.1.4.11.1 | ScalarrcPortLockEnable | read-write | current | Indicate whether the port lock feature is enabled. |
| 1.3.6.1.4.1.2272.1.4.11.2 | ScalarrcPortLockLockedPorts | read-write | current | The set of ports that are administratively locked. Locked ports cannot be modified in anyway until the port is unlocked first. |
| 1.3.6.1.4.1.2272.1.4.17 | ScalarrcChasBrouterPorts | read-only | current | Used to indicate which ports in the system are configured as Brouter ports. |
| 1.3.6.1.4.1.2272.1.4.26 | ScalarrcChasFtpDaemonInSecondaryCpu | read-write | current | Used to enable/disable FTP daemon in 2nd cpu. |
| 1.3.6.1.4.1.2272.1.4.28 | ScalarrcChasNewVlanOptmMode | read-write | current | Vlan Optimization mode. |
| 1.3.6.1.4.1.2272.1.4.29 | ScalarrcChasVlanOptmMode | read-only | current | Vlan Optimization mode the switch currently has booted and will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.4.35 | ScalarrcChasRspMode | read-write | current | This configuration is for enabling/disabling 256K mode. The change will take effect upon reboot. |
| 1.3.6.1.4.1.2272.1.4.36 | ScalarrcChasRspOperMode | read-only | current | R-mode the switch currently has booted and will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.4.37 | ScalarrcChasRspModeError | read-only | current | Used to indicate the r-mode error status |
| 1.3.6.1.4.1.2272.1.4.44 | ScalarrcChasNewMulticastResourceReservation | read-write | current | Used to reserve MGIDs for IP Multicast. The change will take effect upon reboot. |
| 1.3.6.1.4.1.2272.1.4.45 | ScalarrcChasMulticastResourceReservation | read-only | current | MGIDs the switch currently has reserved for IP Multicast; will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.4.46 | ScalarrcChasNewMaxVlanResourceReservation | read-write | current | A mode where all MGIDs are reserved for VLAN use only; no IPMC. The change will take effect upon reboot. |
| 1.3.6.1.4.1.2272.1.4.47 | ScalarrcChasMaxVlanResourceReservation | read-only | current | Tells if all MGIDs are reserved for VLAN use. Will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.4.48 | ScalarrcChasMgidUsageVlanCurrent | read-only | current | Number of MGIDs currently used for VLAN, including SMLT |
| 1.3.6.1.4.1.2272.1.4.49 | ScalarrcChasMgidUsageVlanRemaining | read-only | current | Number of MGIDs remaining allocated for VLAN |
| 1.3.6.1.4.1.2272.1.4.50 | ScalarrcChasMgidUsageMulticastCurrent | read-only | current | Number of MGIDs currently used for IPMC |
| 1.3.6.1.4.1.2272.1.4.51 | ScalarrcChasMgidUsageMulticastRemaining | read-only | current | Number of MGIDs remaining allocated for IPMC |
| 1.3.6.1.4.1.2272.1.4.53 | ScalarrcChasForceTopologyIpFlagEnable | read-write | current | Used to enable/disable flag which is used to set the CLIP-ip as topology ip |
| 1.3.6.1.4.1.2272.1.4.54 | ScalarrcChasCircuitlessIpId | read-write | current | The Clip-Id set by the user to be used as Topology-ip. '0' means no circuitless IP id while '1..256' is valid circuitless Id |
| 1.3.6.1.4.1.2272.1.5 | NodercMirror | |||
| 1.3.6.1.4.1.2272.1.6 | NodercDipSwitch | |||
| 1.3.6.1.4.1.2272.1.7 | NodercTblSize | |||
| 1.3.6.1.4.1.2272.1.7.1 | ScalarrcTblRmonStatSize | read-only | current | Used to indicate the current size of the RMON Statistic table. |
| 1.3.6.1.4.1.2272.1.7.2 | ScalarrcTblRmonHistoryControlSize | read-only | current | Used to indicate the current size of the RMON History Control table. |
| 1.3.6.1.4.1.2272.1.7.3 | ScalarrcTblRmonHistoryEnetSize | read-only | current | Used to indicate the current size of the RMON History Ethernet table. |
| 1.3.6.1.4.1.2272.1.7.4 | ScalarrcTblRmonAlarmSize | read-only | current | Used to indicate the current size of the RMON Alarm table. |
| 1.3.6.1.4.1.2272.1.7.5 | ScalarrcTblRmonEventSize | read-only | current | Used to indicate the current size of the RMON Event table. |
| 1.3.6.1.4.1.2272.1.7.6 | ScalarrcTblRmonLogSize | read-only | current | Used to indicate the current size of the RMON Log table. |
| 1.3.6.1.4.1.2272.1.7.7 | ScalarrcTblArTblSize | read-only | current | Used to indicate the size of the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.8 | ScalarrcTblArFree | read-only | current | Used to indicate the number of free entries that are available in the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.9 | ScalarrcTblArNoSpace | read-only | current | Used to indicate the number of entries that could not be added to the Address Translation (AR) table due to lack of space. |
| 1.3.6.1.4.1.2272.1.7.10 | ScalarrcTblArAdded | read-only | current | Used to indicate the number of entries added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.11 | ScalarrcTblArDeleted | read-only | current | Used to indicate the number of entries deleted to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.12 | ScalarrcTblArMacAdded | read-only | current | Used to indicate the number of MAC entries added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.13 | ScalarrcTblArMacDeleted | read-only | current | Used to indicate the number of MAC entries deleted to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.14 | ScalarrcTblArMacMoved | read-only | current | Used to indicate the number of MAC entries moved in the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.15 | ScalarrcTblArIpAdded | read-only | current | Used to indicate the number of IP entries added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.16 | ScalarrcTblArIpDeleted | read-only | current | Used to indicate the number of IP entries deleted to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.17 | ScalarrcTblArMcastTblSize | read-only | current | Used to indicate the size of the Multicast Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.18 | ScalarrcTblArFreeMcastGroups | read-only | current | Used to indicate the number of free multicast groups availabe in the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.19 | ScalarrcTblArIpMcastAdded | read-only | current | Used to indicate the number of Ip multicast entries that are added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.20 | ScalarrcTblArIpMcastDeleted | read-only | current | Used to indicate the number of Ip multicast entries that are deleted from the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.21 | ScalarrcTblArVlanByPortAdded | read-only | current | Used to indicate the number of VLAN by port entries that are added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.22 | ScalarrcTblArVlanByPortDeleted | read-only | current | Used to indicate the number of VLAN by port entries that are deleted from the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.23 | ScalarrcTblArVlanByProtocolAdded | read-only | current | Used to indicate the number of Vlans by Protocol Type entries that are added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.24 | ScalarrcTblArVlanByProtocolDeleted | read-only | current | Used to indicate the number of Vlans by Protocol Type entries that are deleted from the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.25 | ScalarrcTblArVlanByIpSubnetAdded | read-only | current | Used to indicate the number of VLAN by Ip entries that are added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.26 | ScalarrcTblArVlanByIpSubnetDeleted | read-only | current | Used to indicate the number of VLAN by Ip entries that are deleted from the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.27 | ScalarrcTblArIpSubnetsAdded | read-only | current | Used to indicate the number of Ip subnet entries that are added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.28 | ScalarrcTblArIpSubnetsDeleted | read-only | current | Used to indicate the number of Ip subnet entries that are deleted from the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.29 | ScalarrcTblArRsvpsAdded | read-only | current | Used to indicate the number of RSVP entries that are added to the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.30 | ScalarrcTblArRsvpsDeleted | read-only | current | Used to indicate the number of RSVP entries that are deleted from the Address Translation (AR) table. |
| 1.3.6.1.4.1.2272.1.7.31 | ScalarrcTblBrdgFdbSize | read-only | current | Used to indicate the number of entries in the dot1d forwarding database table. |
| 1.3.6.1.4.1.2272.1.7.32 | ScalarrcTblBrdgStaticSize | read-only | current | Used to indicate the number of entries in the dot1d Static Address Filtering table. |
| 1.3.6.1.4.1.2272.1.7.33 | ScalarrcTblIpAddrSize | read-only | current | Used to indicate the number of entries in the IP Address table. |
| 1.3.6.1.4.1.2272.1.7.34 | ScalarrcTblIpForwardingSize | read-only | current | Used to indicate the number of entries in the IP Forwarding/Best Route table. |
| 1.3.6.1.4.1.2272.1.7.35 | ScalarrcTblIpNetToMediaSize | read-only | current | Used to indicate the number of entries in the IP Net-to-media table. |
| 1.3.6.1.4.1.2272.1.7.36 | ScalarrcTblIpBestPlusAltRouteSize | read-only | current | |
| 1.3.6.1.4.1.2272.1.7.37 | ScalarrcTblIpBestPathSize | read-only | current | |
| 1.3.6.1.4.1.2272.1.7.38 | ScalarrcTblIpBestPlusAltPathSize | read-only | current | |
| 1.3.6.1.4.1.2272.1.8 | NodercIp | |||
| 1.3.6.1.4.1.2272.1.8.1 | NodercIpConf | |||
| 1.3.6.1.4.1.2272.1.8.1.1 | TablercIpConfTable | not-accessible | current | A table used to maintain IP routing information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1 | RowrcIpConfEntry | not-accessible | current | Entry containing IP routing information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is co… |
| 1.3.6.1.4.1.2272.1.8.1.1.1.1 | ColumnrcIpConfIfIndex | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.1.1.1.2 | ColumnrcIpConfAdvertDefRte | read-write | current | Used to indicate whether this interface should advertize a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.3 | ColumnrcIpConfAcceptDefRte | read-write | current | Used to indicate whether this interface should accept a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.4 | ColumnrcIpConfRowStatus | read-write | current | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.5 | ColumnrcIpConfRipEnable | read-write | current | Enable or disable RIP routing on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.6 | ColumnrcIpConfOspfEnable | read-write | current | Enable or disable OSPF routing on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.7 | ColumnrcIpConfIgmpEnable | read-write | current | Enable or disable IGMP on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.8 | ColumnrcIpConfAddrAssigned | read-only | current | Indicate whether IpAddress has been assigned for this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.9 | ColumnrcIpConfDhcpEnable | read-write | current | Enable or disable DHCP on the specified interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.10 | ColumnrcIpConfTriggeredUpdateEnable | read-write | current | Used to indicate whether the RIP triggered update feature should be enabled on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.11 | ColumnrcIpConfAutoAggrerateEnable | read-write | current | Used to indicate whether the auto aggregation feature should be enabled on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.12 | ColumnrcIpConfGenerateDefaultRoute | read-write | current | Used to indicate whether to generate a default RIP route on this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.13 | ColumnrcIpConfAdvertiseWhenDown | read-write | current | The value is used indicated whether vlan state change should be notified to layer 3 or not, provided the vlan is configured as routable interface. Also used fo… |
| 1.3.6.1.4.1.2272.1.8.1.1.1.14 | ColumnrcIpConfDirectBroadcastEnable | read-write | current | Used to indicate whether this interface should forward direct broadcast traffic |
| 1.3.6.1.4.1.2272.1.8.1.1.1.15 | ColumnrcIpConfRipInPolicy | read-write | current | Used to indicate whether this interface should advertize a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.16 | ColumnrcIpConfRipOutPolicy | read-write | current | Used to indicate whether this interface should accept a RIP default route. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.17 | ColumnrcIpConfOspfIfType | read-write | current | OSPF Interface Type. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.18 | ColumnrcIpConfRipCost | read-write | current | Used to indicate the rip cost for this interface. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.19 | ColumnrcIpConfRipHolddown | read-write | current | Used to indicate the rip holddown timer for this interface |
| 1.3.6.1.4.1.2272.1.8.1.1.1.20 | ColumnrcIpConfRipTimeout | read-write | current | Used to indicate the rip timeout interval for this interface |
| 1.3.6.1.4.1.2272.1.8.1.1.1.21 | ColumnrcIpConfRsmltEnable | read-write | current | Used to enable Route Smlt feature. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.22 | ColumnrcIpConfReversePathCheckEnable | read-write | current | Used to indicate whether this interface should perform Reverse Path Check |
| 1.3.6.1.4.1.2272.1.8.1.1.1.23 | ColumnrcIpConfReversePathCheckMode | read-write | current | Reverse Path Checking mode. |
| 1.3.6.1.4.1.2272.1.8.1.1.1.26 | ColumnrcIpConfIpVpnLiteEnable | read-create | current | Enable or disable ipvpn-lite capability on the specified circuitless ip interface. |
| 1.3.6.1.4.1.2272.1.8.1.2 | TablercIpConfOspfTable | not-accessible | current | A table used to maintain OSPF information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.1.2.1 | RowrcIpConfOspfEntry | not-accessible | current | Entry containing OSPF information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is configur… |
| 1.3.6.1.4.1.2272.1.8.1.2.1.1 | ColumnrcIpConfOspfIfIndex | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.1.2.1.2 | ColumnrcIpConfOspfRtrPriority | read-write | current | The priority of this interface. Used in multi- access networks, this field is used in the designated router election algorithm. The value 0 signifies that the … |
| 1.3.6.1.4.1.2272.1.8.1.2.1.3 | ColumnrcIpConfOspfMetric | read-write | current | The metric for this type of service (TOS) on this interface. The default value of the TOS 0 Metric is (10^9 / ifSpeed). The value FFFF means 'no route via this… |
| 1.3.6.1.4.1.2272.1.8.1.2.1.4 | ColumnrcIpConfOspfAuthKey | read-write | current | The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fi… |
| 1.3.6.1.4.1.2272.1.8.1.2.1.5 | ColumnrcIpConfOspfRowStatus | read-write | current | Row status for this entry. |
| 1.3.6.1.4.1.2272.1.8.1.2.1.6 | ColumnrcIpConfOspfHelloInterval | read-write | current | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.4.1.2272.1.8.1.2.1.7 | ColumnrcIpConfOspfRtrDeadInterval | read-write | current | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.4.1.2272.1.8.1.2.1.8 | ColumnrcIpConfOspfIfAreaId | read-write | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.2272.1.8.1.2.1.9 | ColumnrcIpConfOspfAuthType | read-write | current | The authentication type specified for an interface. Additional authentication types may be assigned locally. |
| 1.3.6.1.4.1.2272.1.8.1.2.1.10 | ColumnrcIpConfOspfPollInterval | read-write | current | OSPF NBMA Interface Poll Interval. |
| 1.3.6.1.4.1.2272.1.8.1.2.1.11 | ColumnrcIpConfOspfIfMtuIgnore | read-write | current | Mtu-ignore flag is for ignoring the mtu checking in ospf bdb |
| 1.3.6.1.4.1.2272.1.8.1.3 | NodercIpConfOspfDefaultMetric | |||
| 1.3.6.1.4.1.2272.1.8.1.3.1 | ScalarrcIpConfOspfDefaultMetric10MegPort | read-write | current | Used to indicate the cost associated with 10Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.8.1.3.2 | ScalarrcIpConfOspfDefaultMetric100MegPort | read-write | current | Used to indicate the cost associated with 100Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.8.1.3.3 | ScalarrcIpConfOspfDefaultMetric1000MegPort | read-write | current | Used to indicate the cost associated with 1000Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.8.1.3.4 | ScalarrcIpConfOspfDefaultMetric10000MegPort | read-write | current | Used to indicate the cost associated with 10000Meg Interface(Port). |
| 1.3.6.1.4.1.2272.1.8.1.4 | NodercIpConfOspf | |||
| 1.3.6.1.4.1.2272.1.8.1.4.1 | ScalarrcIpConfOspfTrapEnable | read-write | current | Used to indicate whether Ospf Traps should be sent. |
| 1.3.6.1.4.1.2272.1.8.1.4.2 | ScalarrcIpConfOspfAutoVirtLinkEnable | read-write | current | Used to indicate whether auto virtual link creation is enabled or not. If set to true OSPF will create virtual links between ABRs whether it is needed or not, … |
| 1.3.6.1.4.1.2272.1.8.1.4.3 | ScalarrcIpConfOspfSpfHoldDownTime | read-write | current | The SPF Hold Down Timer value. The SPF will run at most once per hold down timer value. |
| 1.3.6.1.4.1.2272.1.8.1.4.4 | ScalarrcIpConfOspfAction | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.1.4.5 | ScalarrcIpConfOspfRfc1583Compatibility | read-write | current | Controls the preference rules used when choosing among multiple AS-External-LSAs advertising the same destination. When this is enabled, the preference rule wi… |
| 1.3.6.1.4.1.2272.1.8.1.6 | NodercIpConfGlobal | |||
| 1.3.6.1.4.1.2272.1.8.1.6.1 | ScalarrcIpConfGlobalRipHoldDownTime | read-write | current | Used to set the system-wide RIP hold down time in seconds. |
| 1.3.6.1.4.1.2272.1.8.1.6.2 | ScalarrcIpConfGlobalIcmpNetUnreach | read-write | current | Used to set the icmp net unreach feature enable/disable. |
| 1.3.6.1.4.1.2272.1.8.1.6.3 | ScalarrcIpConfGlobalEcmpEnable | read-write | current | Used to set the ecmp enable/disable. |
| 1.3.6.1.4.1.2272.1.8.1.6.4 | ScalarrcIpConfGlobalEcmpMaxPath | read-write | current | Used to globally configure maximum ECMP paths number. |
| 1.3.6.1.4.1.2272.1.8.1.6.5 | ScalarrcIpConfGlobalAlternativeEnable | read-write | current | Used to globally configure alternative enable. |
| 1.3.6.1.4.1.2272.1.8.1.6.6 | ScalarrcIpConfGlobalRouteDiscoveryEnable | read-write | current | Enable/disable ICMP Route Discovery feature |
| 1.3.6.1.4.1.2272.1.8.1.6.8 | ScalarrcIpConfGlobalRipTimeOutInterval | read-write | current | Rip TimeOut Interval in seconds |
| 1.3.6.1.4.1.2272.1.8.1.6.9 | ScalarrcIpConfGlobalRipDefImportMetric | read-write | current | Rip def import metric |
| 1.3.6.1.4.1.2272.1.8.1.6.10 | ScalarrcIpConfGlobalEcmp1PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 1 ECMP path, irrespective of ecmp-max-path configuration |
| 1.3.6.1.4.1.2272.1.8.1.6.11 | ScalarrcIpConfGlobalEcmp2PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 2 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.12 | ScalarrcIpConfGlobalEcmp3PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 3 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.13 | ScalarrcIpConfGlobalEcmp4PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 4 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.14 | ScalarrcIpConfGlobalEcmpPathListApply | read-write | current | This is to apply any changes in ECMP path list configuration or in the prefix-lists configured to be used as path list |
| 1.3.6.1.4.1.2272.1.8.1.6.15 | ScalarrcIpConfGlobalIcmpRedirectMsg | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.1.6.17 | ScalarrcIpConfGlobalArpThreshold | read-write | current | Defines the maximum number of outstanding arp request a switch can generate. |
| 1.3.6.1.4.1.2272.1.8.1.6.18 | ScalarrcIpConfGlobalAllowMoreSpecificNonLocalRouteEnable | read-write | current | Used to determine whether more specific non local routes will go into the routing table. |
| 1.3.6.1.4.1.2272.1.8.1.6.19 | ScalarrcIpConfGlobalUdpCheckSumEnable | read-write | current | Enable/disable UDP checksum calculation |
| 1.3.6.1.4.1.2272.1.8.1.6.20 | ScalarrcIpConfGlobalSuperNetEnable | read-write | current | Used to globally enable Supernetting/ CIDR routing for IP |
| 1.3.6.1.4.1.2272.1.8.1.6.21 | ScalarrcIpConfGlobalEcmp5PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 5 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.22 | ScalarrcIpConfGlobalEcmp6PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 6 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.23 | ScalarrcIpConfGlobalEcmp7PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 7 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.24 | ScalarrcIpConfGlobalEcmp8PathList | read-write | current | Routes to networks specified in this prefix-list can have upto 8 ECMP path, irrespective of ecmp-max-path configuration. |
| 1.3.6.1.4.1.2272.1.8.1.6.26 | ScalarrcIpConfGlobalArpMcastMacFlooding | read-write | current | Enable/disable Ip Arp Multicast Mac Flooding feature. |
| 1.3.6.1.4.1.2272.1.8.1.7 | TablercIpConfOspfAreaTable | not-accessible | current | A table used to maintain OSPF information for a particular Area. |
| 1.3.6.1.4.1.2272.1.8.1.7.1 | RowrcIpConfOspfAreaEntry | not-accessible | current | Entry containing OSPF Area configuration information. An entry is automatically created in this table when an area is configured through ospfAreaTable in (rfc1… |
| 1.3.6.1.4.1.2272.1.8.1.7.1.1 | ColumnrcIpConfOspfAreaId | read-only | current | An unique value to identify an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.2272.1.8.1.7.1.2 | ColumnrcIpConfOspfAreaImportSummary | read-write | current | The area's support for importing Summary advertisements into a stub area. This field should be used only if ospfImportASExtern is set to FALSE |
| 1.3.6.1.4.1.2272.1.8.1.7.1.3 | ColumnrcIpConfOspfAreaActiveIfCount | read-only | current | This variable displays the number of active interfaces configured in this area. An area cannot be deleted if this value is > 0. |
| 1.3.6.1.4.1.2272.1.8.1.10 | TablercIpConfOspfAreaAggregateTable | not-accessible | current | A table used to maintain OSPF summary route metric parameter for a particular Area range. |
| 1.3.6.1.4.1.2272.1.8.1.10.1 | RowrcIpConfOspfAreaAggregateEntry | not-accessible | current | Entry containing OSPF summary route metric parameter for a particular Area range. An entry is automatically created in this table when an area range is configu… |
| 1.3.6.1.4.1.2272.1.8.1.10.1.1 | ColumnrcIpConfOspfAreaAggregateAreaID | read-only | current | The Area the Address Aggregate is to be found within. |
| 1.3.6.1.4.1.2272.1.8.1.10.1.2 | ColumnrcIpConfOspfAreaAggregateLsdbType | read-only | current | The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to. |
| 1.3.6.1.4.1.2272.1.8.1.10.1.3 | ColumnrcIpConfOspfAreaAggregateNet | read-only | current | The IP Address of the Net or Subnet indicated by the range. |
| 1.3.6.1.4.1.2272.1.8.1.10.1.4 | ColumnrcIpConfOspfAreaAggregateMask | read-only | current | The Subnet Mask that pertains to the Net or Subnet. |
| 1.3.6.1.4.1.2272.1.8.1.10.1.5 | ColumnrcIpConfOspfAreaAggregateAdvertiseMetric | read-write | current | Used to specify a metric for a Summary LSA (type 3) generated by OSPF through an area range. If this metric is set to 0, OSPF uses the cost to the farthest poi… |
| 1.3.6.1.4.1.2272.1.8.1.10.1.6 | ColumnrcIpConfOspfAreaAggregateEffect | read-write | current | Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnet's not being advertised at… |
| 1.3.6.1.4.1.2272.1.8.1.11 | TablercIpConfRsmltTable | not-accessible | current | A table used to maintain OSPF summary route metric parameter for a particular Area range. |
| 1.3.6.1.4.1.2272.1.8.1.11.1 | RowrcIpConfRsmltEntry | not-accessible | current | Entry containing OSPF summary route metric parameter for a particular Area range. An entry is automatically created in this table when an area range is configu… |
| 1.3.6.1.4.1.2272.1.8.1.11.1.1 | ColumnrcIpConfRsmltIfIndex | read-only | current | Interface Index, this is an index of the table. |
| 1.3.6.1.4.1.2272.1.8.1.11.1.2 | ColumnrcIpConfRsmltHoldDownTimer | read-write | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.8.1.11.1.3 | ColumnrcIpConfRsmltHoldUpTimer | read-write | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.8.1.11.1.4 | ColumnrcIpConfRsmltRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.2272.1.8.2 | TablercIpAddrTable | not-accessible | current | The table of addressing information relevant to this entity's IP addresses. This table is identical to the ipAddrTable in MIB2 except the columns rcIpAdEntIfIn… |
| 1.3.6.1.4.1.2272.1.8.2.1 | RowrcIpAddrEntry | not-accessible | current | The addressing information for one of this entity's IP addresses. |
| 1.3.6.1.4.1.2272.1.8.2.1.1 | ColumnrcIpAdEntIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.8.2.1.2 | ColumnrcIpAdEntAddr | read-only | current | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.2272.1.8.2.1.3 | ColumnrcIpAdEntNetMask | read-write | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.2272.1.8.2.1.4 | ColumnrcIpAdEntBcastAddrFormat | read-only | current | The IP broadcast address format used on this interface. |
| 1.3.6.1.4.1.2272.1.8.2.1.5 | ColumnrcIpAdEntReasmMaxSize | read-only | current | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.4.1.2272.1.8.2.1.6 | ColumnrcIpAdEntRowStatus | read-write | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.2.1.7 | ColumnrcIpAdEntVlanId | read-write | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.8.2.1.8 | ColumnrcIpAdEntBrouterPort | read-only | current | Used to indicate whether this entry correponds to a brouter port (as oppose to a routable VLAN). This value cannot be changed after the row is created. |
| 1.3.6.1.4.1.2272.1.8.2.1.9 | ColumnrcIpAdEntMacOffset | read-write | current | Used to translate the ip address into mac address. The system has 512 mac addresses of which 0-507 are reserved for Boardwalk box. 508-511 is reserved for MG. … |
| 1.3.6.1.4.1.2272.1.8.2.1.10 | ColumnrcIpAdEntIfType | read-only | current | The address entry IfType indicates the type of the interface. In the case of circuit-less-IP there is no association with any ports. In other words, it can be … |
| 1.3.6.1.4.1.2272.1.8.2.1.12 | ColumnrcIpAdEntVrfId | read-create | current | The VrfId used in this table is to associate VLANs or Brouter ports to a VRF after the creation of VLANs or Brouter ports. VRFID 0 is reserved for the Administ… |
| 1.3.6.1.4.1.2272.1.8.3 | TablercIpFlowTable | not-accessible | current | IpFlow Table. This table contain entries that correspond to RSVP records in the switching fabric Address Resolution table. A connection that has a matching ent… |
| 1.3.6.1.4.1.2272.1.8.3.1 | RowrcIpFlowEntry | not-accessible | current | Proprietary flow control variables. |
| 1.3.6.1.4.1.2272.1.8.3.1.1 | ColumnrcIpFlowSrcIpAddress | read-only | current | The source IP address of an IP packet. |
| 1.3.6.1.4.1.2272.1.8.3.1.2 | ColumnrcIpFlowSrcIpPort | read-only | current | The source port of an IP packet. A zero value in this field is used as a wildcard value. |
| 1.3.6.1.4.1.2272.1.8.3.1.3 | ColumnrcIpFlowDstIpAddress | read-only | current | The destination IP address of an IP packet. |
| 1.3.6.1.4.1.2272.1.8.3.1.4 | ColumnrcIpFlowDstIpPort | read-only | current | The destination port of an IP packet. A zero value in this field is used as a wildcard value. |
| 1.3.6.1.4.1.2272.1.8.3.1.5 | ColumnrcIpFlowProtocol | read-only | current | The protocol type of an IP packet. A zero value in this field is used as a wildcard value. |
| 1.3.6.1.4.1.2272.1.8.3.1.6 | ColumnrcIpFlowRowStatus | read-write | current | Status of entry. |
| 1.3.6.1.4.1.2272.1.8.7 | TablercIpRouteTable | not-accessible | current | This entity's IP Routing table. |
| 1.3.6.1.4.1.2272.1.8.7.1 | RowrcIpRouteEntry | not-accessible | current | A route to a particular destination. |
| 1.3.6.1.4.1.2272.1.8.7.1.1 | ColumnrcIpRouteDest | read-only | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.2272.1.8.7.1.2 | ColumnrcIpRouteMask | read-only | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not… |
| 1.3.6.1.4.1.2272.1.8.7.1.3 | ColumnrcIpRouteNextHop | read-write | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.2272.1.8.7.1.4 | ColumnrcIpRouteMetric | read-write | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. I… |
| 1.3.6.1.4.1.2272.1.8.7.1.5 | ColumnrcIpRouteIfIndex | read-only | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.2272.1.8.7.1.6 | ColumnrcIpRouteType | read-only | current | The type of route. |
| 1.3.6.1.4.1.2272.1.8.7.1.7 | ColumnrcIpRouteProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.2272.1.8.7.1.8 | ColumnrcIpRouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.2272.1.8.7.1.9 | ColumnrcIpRouteRowStatus | read-write | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.7.1.10 | ColumnrcIpRoutePref | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.7.1.11 | ColumnrcIpRouteAltSequence | read-only | current | Alternative Route Sequence. 0 denotes Best Route. |
| 1.3.6.1.4.1.2272.1.8.7.1.12 | ColumnrcIpRoutePathType | read-only | current | The type of route. It is a combination of direct, indirect, best, alternative and ECMP path. |
| 1.3.6.1.4.1.2272.1.8.7.1.13 | ColumnrcIpRouteSrcVrfId | read-write | current | srcVrfId of the next-hop address |
| 1.3.6.1.4.1.2272.1.8.7.1.14 | ColumnrcIpRouteNextHopId | read-only | current | Identifier of the next-hop, hostname or mac adress. |
| 1.3.6.1.4.1.2272.1.8.8 | TablercIpConfDhcpTable | not-accessible | current | DHCP configuration table |
| 1.3.6.1.4.1.2272.1.8.8.1 | RowrcIpConfDhcpEntry | not-accessible | current | Used to configure DHCP on a particular port. An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry wil… |
| 1.3.6.1.4.1.2272.1.8.8.1.1 | ColumnrcIpConfDhcpIfIndex | read-only | current | Interface number. The number can represent either a physical or logical(VLAN) interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.2 | ColumnrcIpConfDhcpMaxHop | read-write | current | Used to indicate the maximum number of hops a DHCP packet can take from the source device to the destination device (i.e., DHCP client to DHCP server). |
| 1.3.6.1.4.1.2272.1.8.8.1.3 | ColumnrcIpConfDhcpMinSec | read-write | current | Used to indicate the minimum number of seconds to wait between receiving a DHCP packet and actually forwarding the DHCP packet to the destination device. A val… |
| 1.3.6.1.4.1.2272.1.8.8.1.4 | ColumnrcIpConfDhcpMode | read-write | current | Used to indicate what type of DHCP packets this interface should support. A value of none(1) will result in all incoming DHCP and BOOTP packets to be dropped. |
| 1.3.6.1.4.1.2272.1.8.8.1.5 | ColumnrcIpConfDhcpRowStatus | read-write | current | An entry is created automatically when the variable rcIpConfDhcpEnable is set to TRUE. Once created this entry will only be deleted if the rcIpConfDhcpRowStatu… |
| 1.3.6.1.4.1.2272.1.8.8.1.6 | ColumnrcIpConfDhcpNumRequests | read-only | current | The total number of DHCP requests seen on this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.7 | ColumnrcIpConfDhcpNumReplies | read-only | current | The total number of DHCP replies seen on this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.8 | ColumnrcIpConfDhcpAlwaysBroadcast | read-write | current | Used to indicate if DHCP Reply packets should be broadcast to the DHCP client on this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.11 | ColumnrcIpConfDhcpCircuitId | read-write | current | Used to indicate if DHCP packets should have option82 circuitId info inserted before sent to servers, for this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.12 | ColumnrcIpConfDhcpRemoteId | read-write | current | Used to indicate if DHCP packets should have option82 remoteId info inserted before sent to servers, for this interface. |
| 1.3.6.1.4.1.2272.1.8.8.1.13 | ColumnrcIpConfDhcpTrusted | read-write | current | Used to indicate if DHCP packets come through a trusted dhcp circuit. This means that packets with giaddr set to 0 having option82 in it, will be forwarded if … |
| 1.3.6.1.4.1.2272.1.8.8.1.14 | ColumnrcIpConfDhcpAgentAddr | read-only | current | The IP address configured as relay on this interface; it is either the IP of the physical interface or the IP of the VRRP address |
| 1.3.6.1.4.1.2272.1.8.9 | TablercIpDhcpForwardTable | not-accessible | current | DHCP forwarding table. |
| 1.3.6.1.4.1.2272.1.8.9.1 | RowrcIpDhcpForwardEntry | not-accessible | current | An entry used represents a DHCP forwarding directive. |
| 1.3.6.1.4.1.2272.1.8.9.1.1 | ColumnrcIpDhcpForwardAgentAddr | read-only | current | The IP address configured on an interface (i.e., a locally configured IP address). |
| 1.3.6.1.4.1.2272.1.8.9.1.2 | ColumnrcIpDhcpForwardServerAddr | read-only | current | The IP address of the DHCP server. If this IP address corresponds to a locally configured IP network, the DHCP packet is broadcasted out the interface the IP a… |
| 1.3.6.1.4.1.2272.1.8.9.1.3 | ColumnrcIpDhcpForwardEnable | read-write | current | Used to indicate whether is entry should be used. |
| 1.3.6.1.4.1.2272.1.8.9.1.4 | ColumnrcIpDhcpForwardMode | read-write | current | Used to indicate whether this entry pertains to BOOTP packets, DHCP packets, or both. |
| 1.3.6.1.4.1.2272.1.8.9.1.5 | ColumnrcIpDhcpForwardRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.13 | NodercIpUdp | |||
| 1.3.6.1.4.1.2272.1.8.13.1 | ScalarrcIpUdpProtocolTableSize | read-only | current | Used to indicate the number of entries in the rcIpUdpProtocolTable. |
| 1.3.6.1.4.1.2272.1.8.13.2 | TablercIpUdpProtocolTable | not-accessible | current | list of UDP protocols. Used to determine whether to forward the UDP broadcast packet or not. |
| 1.3.6.1.4.1.2272.1.8.13.2.1 | RowrcIpUdpProtocolEntry | not-accessible | current | Used to include a particular UDP port in the table. An entry in this table indicates that the box might do forwarding of UDP broadcast packets if there is a ma… |
| 1.3.6.1.4.1.2272.1.8.13.2.1.1 | ColumnrcIpUdpProtocolPortNumber | read-only | current | well-known UDP Port number. Pre-assigned port number for this protocol. Port used by the server process as its contact port. It cannot be BOOTP/DHCP port#s 67,… |
| 1.3.6.1.4.1.2272.1.8.13.2.1.2 | ColumnrcIpUdpProtocolName | read-write | current | Used to indicate the name of the protocol that is running on top of UDP protocol. cannot change the name once created. This should be set while creating the en… |
| 1.3.6.1.4.1.2272.1.8.13.2.1.3 | ColumnrcIpUdpProtocolRowStatus | read-write | current | Rowstatus of this entry. |
| 1.3.6.1.4.1.2272.1.8.13.3 | ScalarrcIpUdpPortFwdTableSize | read-only | current | Used to indicate the number of entries in the rcIpUdpPortFwdTable. |
| 1.3.6.1.4.1.2272.1.8.13.4 | TablercIpUdpPortFwdTable | not-accessible | current | Udp forward entry table. |
| 1.3.6.1.4.1.2272.1.8.13.4.1 | RowrcIpUdpPortFwdEntry | not-accessible | current | An entry is configured to specify forwarding policy parameters. |
| 1.3.6.1.4.1.2272.1.8.13.4.1.1 | ColumnrcIpUdpPortFwdDestPort | read-only | current | The well-known port number defined for UDP/TCP depending on the value of IpProtoType field in this entry. This port number has to be defined in the rcIpUdpProt… |
| 1.3.6.1.4.1.2272.1.8.13.4.1.2 | ColumnrcIpUdpPortFwdDestAddr | read-only | current | Destination IP address. The IP addres to which the UDP/TCP broadcast should be forwarded. This IP address can be any IP server address or subnet broadcast addr… |
| 1.3.6.1.4.1.2272.1.8.13.4.1.3 | ColumnrcIpUdpPortFwdId | read-only | current | Identifier of this entry. Used internally to identify this entry. |
| 1.3.6.1.4.1.2272.1.8.13.4.1.4 | ColumnrcIpUdpPortFwdFwdListIdListSize | read-only | current | Used to indicate the number of id(s) in the rcIpUdpPortFwdListId variable. |
| 1.3.6.1.4.1.2272.1.8.13.4.1.5 | ColumnrcIpUdpPortFwdFwdListIdList | read-only | current | Used to indicate zero or more rcIpUdpPortFwdListEntry(s) that are referring to this entry. Each list-id identifier is stored as two bytes in this array startin… |
| 1.3.6.1.4.1.2272.1.8.13.4.1.6 | ColumnrcIpUdpPortFwdNumFwdPackets | read-only | current | The total number of UDP/TCP broadcast packets forwarded using this policy. |
| 1.3.6.1.4.1.2272.1.8.13.4.1.7 | ColumnrcIpUdpPortFwdNumDropPacketsTtlExpired | read-only | current | The total number of UDP/TCP broadcast packets dropped because the TTL has expired. |
| 1.3.6.1.4.1.2272.1.8.13.4.1.8 | ColumnrcIpUdpPortFwdNumDropPacketsDestUnreach | read-only | current | The total number of UDP/TCP broadcast packets dropped because the rcIpUdpPortFwdDestAddr specified in this policy was unreachable. |
| 1.3.6.1.4.1.2272.1.8.13.4.1.9 | ColumnrcIpUdpPortFwdRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.13.5 | ScalarrcIpUdpPortFwdListTableSize | read-only | current | Used to indicate the number of entries in the rcIpUdpPortFwdListTable. |
| 1.3.6.1.4.1.2272.1.8.13.6 | TablercIpUdpPortFwdListTable | not-accessible | current | A table used to group rcIpUdpPortFwdEntry(s) into a list. |
| 1.3.6.1.4.1.2272.1.8.13.6.1 | RowrcIpUdpPortFwdListEntry | not-accessible | current | Route entry attributes. |
| 1.3.6.1.4.1.2272.1.8.13.6.1.1 | ColumnrcIpUdpPortFwdListId | read-only | current | A value that uniquely identifies this list of rcIpUdpPortFwdListEntry. |
| 1.3.6.1.4.1.2272.1.8.13.6.1.3 | ColumnrcIpUdpPortFwdListName | read-write | current | An administratively-assigned name for this list. |
| 1.3.6.1.4.1.2272.1.8.13.6.1.4 | ColumnrcIpUdpPortFwdListFwdIdListSize | read-only | current | Used to indicate the number of rcIpUdpPortFwdNetEntry id(s) in the rcIpUdpPortFwdListIdList variable. |
| 1.3.6.1.4.1.2272.1.8.13.6.1.5 | ColumnrcIpUdpPortFwdListFwdIdList | read-write | current | Used to indicate zero or more UdpPortFwd entries that are associated to this list. Each entry identifier is stored as two bytes in this array starting from off… |
| 1.3.6.1.4.1.2272.1.8.13.6.1.6 | ColumnrcIpUdpPortFwdListRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.8.13.7 | ScalarrcIpUdpConfBroadcastIntfTableSize | read-only | current | Used to indicate the number of entries in the rcIpUdpBroadcastIntfTable. |
| 1.3.6.1.4.1.2272.1.8.13.8 | TablercIpUdpConfBroadcastIntfTable | not-accessible | current | IP broadcast forward configuration table |
| 1.3.6.1.4.1.2272.1.8.13.8.1 | RowrcIpUdpConfBroadcastIntfEntry | not-accessible | current | Used to configure UDP broadcast forward on a particular interface. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.1 | ColumnrcIpUdpConfBroadcastIntfLocalIfAddr | read-only | current | The ip address of the local interface that is partipating in the forwarding UDP broadcast packets. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.2 | ColumnrcIpUdpConfBroadcastIntfUdpPortFwdListId | read-write | current | Used to indicate the number UDP ports that this interface is configured to forward. A value of '0' indicates that this interface will not forward any UDP broad… |
| 1.3.6.1.4.1.2272.1.8.13.8.1.3 | ColumnrcIpUdpConfBroadcastIntfMaxTtl | read-write | current | Used to indicate the maximum number of hops an IP broadcast packet can take from the source device to the destination device. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.4 | ColumnrcIpUdpConfBroadcastIntfNumRxPkts | read-only | current | The total number of UDP/TCP broadcast packets received by this local interface. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.5 | ColumnrcIpUdpConfBroadcastIntfNumFwdPkts | read-only | current | The total number of UDP/TCP broadcast packets forwarded. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.6 | ColumnrcIpUdpConfBroadcastIntfNumDropPktsMaxTtlExpired | read-only | current | The total number of UDP/TCP broadcast packets dropped because the TTL has expired. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.7 | ColumnrcIpUdpConfBroadcastIntfNumDropPktsDestUnreach | read-only | current | The total number of UDP broadcast packets dropped because the destination was unreachable. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.8 | ColumnrcIpUdpConfBroadcastIntfNumDropPktsUnknownPort | read-only | current | The total number of UDP/TCP broadcast packets dropped because the destination port/protocol specified has no matching forwarding policy. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.9 | ColumnrcIpUdpConfBroadcastIntfRowStatus | read-write | current | Entry row status. |
| 1.3.6.1.4.1.2272.1.8.13.8.1.10 | ColumnrcIpUdpConfBroadcastIntfBroadCastMask | read-write | current | The subnet mask of the local interface that is used for broadcasting the UDP broadcast packets. |
| 1.3.6.1.4.1.2272.1.8.16 | NodercIpPim | |||
| 1.3.6.1.4.1.2272.1.8.16.1 | NodercIpPimGlobal | |||
| 1.3.6.1.4.1.2272.1.8.16.1.1 | ScalarrcIpPimGlobalEnable | read-write | current | enable feature |
| 1.3.6.1.4.1.2272.1.8.16.1.2 | ScalarrcIpPimGlobalMode | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.16.1.4 | ScalarrcIpPimGlobalRegisterSuppTimer | read-write | current | Each source's DR maintains, per (S,G), a Register- Suppression-timer in seconds. The Register- Suppression-timer is started by the Register-Stop message; upon … |
| 1.3.6.1.4.1.2272.1.8.16.1.5 | ScalarrcIpPimGlobalInterfaceTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.16.1.6 | ScalarrcIpPimGlobalUniRouteChgTimeOut | read-write | current | This timer allows a better tuning on how fast the routing information is going to get updated from RTM (the frequency at which the RTM is polled for routing in… |
| 1.3.6.1.4.1.2272.1.8.16.1.7 | ScalarrcIpPimGlobalDiscardDataTimeOut | read-write | current | This timer is used to discard data until the Join is received from the RP. A ipmc discard record is created and deleted once the timer expires and/or when a Jo… |
| 1.3.6.1.4.1.2272.1.8.16.1.8 | ScalarrcIpPimGlobalCRPADVTimeOut | read-write | current | Routers configured as candidate RPs use this timer to periodically send C-RP-Adv messages. Upon expiry, a C-RP-Adv message is sent to the elected BSR. |
| 1.3.6.1.4.1.2272.1.8.16.1.9 | ScalarrcIpPimGlobalBootStrapPeriod | read-write | current | At the elected BSR, this is the interval between originating Bootstrap messages. |
| 1.3.6.1.4.1.2272.1.8.16.1.10 | ScalarrcIpPimGlobalStaticRP | read-write | current | Enable/Disable Static RP feature. |
| 1.3.6.1.4.1.2272.1.8.16.1.12 | ScalarrcIpPimGlobalFwdCacheTimeOut | read-write | current | PIM forward cache expiry value in seconds.This value is going to be used in aging PIM mroutes in seconds. |
| 1.3.6.1.4.1.2272.1.8.16.1.13 | ScalarrcIpPimGlobalFastJoinPrune | read-write | current | Pim Fast Join Prune. |
| 1.3.6.1.4.1.2272.1.8.16.2 | TablercIpPimTable | not-accessible | current | IP Pim table |
| 1.3.6.1.4.1.2272.1.8.16.2.1 | RowrcIpPimEntry | not-accessible | current | An entry of Ip Pim Table. |
| 1.3.6.1.4.1.2272.1.8.16.2.1.1 | ColumnrcIpPimIfIndex | read-only | current | port |
| 1.3.6.1.4.1.2272.1.8.16.2.1.2 | ColumnrcIpPimEnable | read-write | current | enable interface |
| 1.3.6.1.4.1.2272.1.8.16.2.1.3 | ColumnrcIpPimMode | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.16.2.1.4 | ColumnrcIpPimHelloInterval | read-write | current | frq. at which hello sent. |
| 1.3.6.1.4.1.2272.1.8.16.2.1.5 | ColumnrcIpPimJoinPruneInterval | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.16.2.1.6 | ColumnrcIpPimCBSRPreference | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.16.2.1.7 | ColumnrcIpPimIntfType | read-write | current | Pim interface type. |
| 1.3.6.1.4.1.2272.1.8.16.3 | TablercIpPimInterfaceTable | not-accessible | current | IP Pim table |
| 1.3.6.1.4.1.2272.1.8.16.3.1 | RowrcIpPimInterfaceEntry | not-accessible | current | An entry of Ip Pim Interface Table. |
| 1.3.6.1.4.1.2272.1.8.16.3.1.1 | ColumnrcIpPimInterfaceIfIndex | read-only | current | port |
| 1.3.6.1.4.1.2272.1.8.16.3.1.2 | ColumnrcIpPimInterfaceOperState | read-only | current | The current operational state of this PIM interface. This object is deprecated in favor of ifOperStatus. |
| 1.3.6.1.4.1.2272.1.8.16.3.1.3 | ColumnrcIpPimInterfaceType | read-write | current | Pim interface type. |
| 1.3.6.1.4.1.2272.1.8.16.4 | TablercIpPimStaticRPTable | not-accessible | current | The table lists all the RPs configured statically for various IP multicast groups. |
| 1.3.6.1.4.1.2272.1.8.16.4.1 | RowrcIpPimStaticRPEntry | not-accessible | current | An entry (conceptual row) in the rcIpPimStaticRPTable. |
| 1.3.6.1.4.1.2272.1.8.16.4.1.1 | ColumnrcIpPimStaticRPGroupAddress | read-only | current | The IP multicast group address which, when combined with rcIpPimStaticRPGroupMask, identifies a group prefix for which rcIpPimStaticRPAddress is a static-RP. |
| 1.3.6.1.4.1.2272.1.8.16.4.1.2 | ColumnrcIpPimStaticRPGroupMask | read-only | current | The multicast group address mask which, when combined with rcIpPimStaticRPGroupAddress, identifies a group prefix for which rcIpPimStaticRPAddress is a static-… |
| 1.3.6.1.4.1.2272.1.8.16.4.1.3 | ColumnrcIpPimStaticRPAddress | read-only | current | The (unicast) address of the static-RP. |
| 1.3.6.1.4.1.2272.1.8.16.4.1.4 | ColumnrcIpPimStaticRPRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.2272.1.8.16.4.1.5 | ColumnrcIpPimStaticRPStatus | read-only | current | The status of StaticRP. |
| 1.3.6.1.4.1.2272.1.8.16.5 | NodercIpPimCurrBsr | |||
| 1.3.6.1.4.1.2272.1.8.16.5.1 | ScalarrcIpPimCurrBsrAddress | read-only | current | Current BSR address |
| 1.3.6.1.4.1.2272.1.8.16.5.2 | ScalarrcIpPimCurrBsrFragmentTag | read-only | current | Current BSR Fragment Tag |
| 1.3.6.1.4.1.2272.1.8.16.5.3 | ScalarrcIpPimCurrBsrHashMask | read-only | current | Current BSR Hash Mask value |
| 1.3.6.1.4.1.2272.1.8.16.5.4 | ScalarrcIpPimCurrBsrPriority | read-only | current | Current BSR Priority |
| 1.3.6.1.4.1.2272.1.8.16.5.5 | ScalarrcIpPimCurrBsrBootStrapTimer | read-only | current | Current BSR Boot Strap Timer |
| 1.3.6.1.4.1.2272.1.8.16.6 | TablercIpPimVirtualNbrTable | not-accessible | current | Table listing the router's virtual PIM neighbors |
| 1.3.6.1.4.1.2272.1.8.16.6.1 | RowrcIpPimVirtualNbrEntry | not-accessible | current | An entry in the virtual PIM neighbors' table. |
| 1.3.6.1.4.1.2272.1.8.16.6.1.1 | ColumnrcIpPimVirtualNbrAddress | not-accessible | current | The IP address of the virtual PIM neighbor for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.8.16.6.1.2 | ColumnrcIpPimVirtualNbrIfIndex | read-create | current | The value of ifIndex for the PIM interface in which this virtual neighbor is created. This value is mandatory while trying to create a virtual PIM neighbor. |
| 1.3.6.1.4.1.2272.1.8.16.6.1.3 | ColumnrcIpPimVirtualNbrRowStatus | read-create | current | To create/delete an entry in the virtual PIM neighbors' table. |
| 1.3.6.1.4.1.2272.1.8.17 | TablercIpMulticastArpTable | not-accessible | current | IP Multicast Arp table |
| 1.3.6.1.4.1.2272.1.8.17.1 | RowrcIpMulticastArpEntry | not-accessible | current | An entry of Ip Multicast Arp Table. |
| 1.3.6.1.4.1.2272.1.8.17.1.1 | ColumnrcIpMulticastArpVlanId | read-only | current | vlan id |
| 1.3.6.1.4.1.2272.1.8.17.1.2 | ColumnrcIpMulticastArpMacAddress | read-only | current | multicast mac address |
| 1.3.6.1.4.1.2272.1.8.17.1.3 | ColumnrcIpMulticastArpIpAddress | read-only | current | multicast ip address |
| 1.3.6.1.4.1.2272.1.8.17.1.4 | ColumnrcIpMulticastArpPorts | read-write | current | ports within a particular vlan |
| 1.3.6.1.4.1.2272.1.8.17.1.5 | ColumnrcIpMulticastArpNumMltIds | read-only | current | number of mlt ids |
| 1.3.6.1.4.1.2272.1.8.17.1.6 | ColumnrcIpMulticastArpMltIds | read-write | current | mlt id |
| 1.3.6.1.4.1.2272.1.8.17.1.7 | ColumnrcIpMulticastArpRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.8.20 | NodercIpRipInterface | |||
| 1.3.6.1.4.1.2272.1.8.20.1 | TablercIpRipInterfaceTable | not-accessible | current | IP Rip Interface table |
| 1.3.6.1.4.1.2272.1.8.20.1.1 | RowrcIpRipInterfaceEntry | not-accessible | current | An entry of Ip Rip Interface Table. |
| 1.3.6.1.4.1.2272.1.8.20.1.1.1 | ColumnrcIpRipInterfaceAddress | read-only | current | Ip Address |
| 1.3.6.1.4.1.2272.1.8.20.1.1.2 | ColumnrcIpRipInterfaceIfIndex | read-only | current | Rip Interface If Index. |
| 1.3.6.1.4.1.2272.1.8.20.1.1.3 | ColumnrcIpRipInterfaceRipEnable | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.4 | ColumnrcIpRipInterfaceAccDefRte | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.5 | ColumnrcIpRipInterfaceAdvDefRte | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.6 | ColumnrcIpRipInterfaceAutoAggregate | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.7 | ColumnrcIpRipInterfaceCost | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.8 | ColumnrcIpRipInterfaceListen | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.9 | ColumnrcIpRipInterfacePoison | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.10 | ColumnrcIpRipInterfaceSupply | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.11 | ColumnrcIpRipInterfaceTriggeredUpdate | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.12 | ColumnrcIpRipInterfaceInPolicy | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.13 | ColumnrcIpRipInterfaceOutPolicy | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.14 | ColumnrcIpRipInterfaceProxyAnnounceFlag | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.20.1.1.15 | ColumnrcIpRipInterfaceHolddown | read-write | current | Used to indicate the rip holddown timer for this interface |
| 1.3.6.1.4.1.2272.1.8.20.1.1.16 | ColumnrcIpRipInterfaceTimeout | read-write | current | Used to indicate the rip timeout interval for this interface |
| 1.3.6.1.4.1.2272.1.8.21 | TablercIpMulticastTimedPruneTable | not-accessible | current | This feature provides the ability for the user to create (S,G) Forwarding Entries that would not be pruned until a configurable timer expires. This feature is … |
| 1.3.6.1.4.1.2272.1.8.21.1 | RowrcIpMulticastTimedPruneEntry | not-accessible | current | An entry of Ip Multicast Timed Prune Table. |
| 1.3.6.1.4.1.2272.1.8.21.1.1 | ColumnrcIpMulticastTimedPruneGroupAddress | read-write | current | This field indicates the IP Multicast Group Address associated with the IP multicast stream. |
| 1.3.6.1.4.1.2272.1.8.21.1.2 | ColumnrcIpMulticastTimedPruneSourceAddress | read-write | current | This is the Source Subnet IP address of the sender of the IP multicast stream. |
| 1.3.6.1.4.1.2272.1.8.21.1.3 | ColumnrcIpMulticastTimedPruneSrcSubnetMask | read-write | current | This is the Source Subnet Mask IP address of the sender of the IP multicast stream. |
| 1.3.6.1.4.1.2272.1.8.21.1.4 | ColumnrcIpMulticastTimedPruneAgingTimer | read-write | current | This field represents the amount of time (in minutes) this timed prune entry will be kept in the forwarding table when there are no more receivers. After this … |
| 1.3.6.1.4.1.2272.1.8.21.1.5 | ColumnrcIpMulticastTimedPruneTimeLeft | read-only | current | This read-only field represents the remaining time for which this timed prune entry will be kept in the forwarding table. After this timer expires, this timed … |
| 1.3.6.1.4.1.2272.1.8.21.1.6 | ColumnrcIpMulticastTimedPruneLastActivity | read-only | current | This read-only field represents the actual time since the traffic has come from this Source, Group pair. |
| 1.3.6.1.4.1.2272.1.8.21.1.7 | ColumnrcIpMulticastTimedPruneRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.8.22 | TablercIpConfIcmpRdiscTable | not-accessible | current | A table used to maintain ICMP Route discovery information for a particular interface. |
| 1.3.6.1.4.1.2272.1.8.22.1 | RowrcIpConfIcmpRdiscEntry | not-accessible | current | Entry containing ICMP Rdisc information. An entry is automatically created in this table when routing is enabled for an interface -or- when an ip address is co… |
| 1.3.6.1.4.1.2272.1.8.22.1.1 | ColumnrcIpConfIcmpRdiscIfIndex | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN). |
| 1.3.6.1.4.1.2272.1.8.22.1.2 | ColumnrcIpConfIcmpRdiscAdvAddress | read-write | current | Advertisement address to which the route discovery advertisements transmitted on this interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.3 | ColumnrcIpConfIcmpRdiscAdvFlag | read-write | current | Flag to indicate whether or not the address is to be advertised on this interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.4 | ColumnrcIpConfIcmpRdiscAdvLifetime | read-write | current | The value to be placed in the lifetime field of Router Advertisements sent from the interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.5 | ColumnrcIpConfIcmpRdiscMaxAdvInterval | read-write | current | The maximum time allowed between sending Router Advertisements from this interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.6 | ColumnrcIpConfIcmpRdiscMinAdvInterval | read-write | current | The minimum time allowed between sending Router Advertisements from this interface. |
| 1.3.6.1.4.1.2272.1.8.22.1.7 | ColumnrcIpConfIcmpRdiscPreferenceLevel | read-write | current | Preferability of the router address as a default Router |
| 1.3.6.1.4.1.2272.1.8.23 | NodercIpMulticastSoftwareForwarding | |||
| 1.3.6.1.4.1.2272.1.8.23.1 | ScalarrcIpMulticastSoftwareForwardingEnable | read-write | current | Enable/Disable multicast software forwarding. |
| 1.3.6.1.4.1.2272.1.8.24 | NodercIpMrouteHw | |||
| 1.3.6.1.4.1.2272.1.8.24.1 | TablercIpMrouteHwTable | not-accessible | current | The (conceptual) table containing hardware entries of multicast routing information for all the Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.1.1 | RowrcIpMrouteHwEntry | not-accessible | current | An entry (conceptual row) containing hardware entries of multicast routing information for a particular Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.1.1.1 | ColumnrcIpMrouteHwGroupAddress | read-only | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.1.1.2 | ColumnrcIpMrouteHwSubnet | read-only | current | The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.1.1.3 | ColumnrcIpMrouteHwInvlan | read-only | current | The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.1.1.4 | ColumnrcIpMrouteHwPruned | read-only | current | This is to show weather the entry containing multicast routing information has received Prune message or not. |
| 1.3.6.1.4.1.2272.1.8.24.1.1.5 | ColumnrcIpMrouteHwIndex | read-only | current | This Index value keep tracks of the hardware record that has been accessed for displaying the entry containing multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.2 | TablercIpMrouteHwPrunesTable | not-accessible | current | The (conceptual) table containing prune entries of multicast routing information for the Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.2.1 | RowrcIpMrouteHwPrunesEntry | not-accessible | current | An entry (conceptual row) containing prune entries of multicast routing information for a particular Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.2.1.1 | ColumnrcIpMrouteHwPrunesGroupAddress | read-only | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.2.1.2 | ColumnrcIpMrouteHwPrunesSubnet | read-only | current | The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.2.1.3 | ColumnrcIpMrouteHwPrunesInvlan | read-only | current | The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.2.1.4 | ColumnrcIpMrouteHwPrunesNeighbor | read-only | current | The IpAddress from where the Prune message has been received. |
| 1.3.6.1.4.1.2272.1.8.24.2.1.5 | ColumnrcIpMrouteHwPrunesTimer | read-only | current | This is to show how much time is left for this particular entry containing multicast routing information during which the graft message can be sent. |
| 1.3.6.1.4.1.2272.1.8.24.3 | TablercIpMrouteHwSourcesTable | not-accessible | current | The (conceptual) table containing source entries of multicast routing information for the Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.3.1 | RowrcIpMrouteHwSourcesEntry | not-accessible | current | An entry (conceptual row) containing source entries of multicast routing information for a particular Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.3.1.1 | ColumnrcIpMrouteHwSourcesGroupAddress | read-only | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.3.1.2 | ColumnrcIpMrouteHwSourcesSubnet | read-only | current | The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.3.1.3 | ColumnrcIpMrouteHwSourcesInvlan | read-only | current | The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.3.1.4 | ColumnrcIpMrouteHwSourcesAddress | read-only | current | The Source Address from where the stream of traffic is reaching the corresponding Group Address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.3.1.5 | ColumnrcIpMrouteHwSourcesIngressPort | read-only | current | The Ingress vlan ports from where the traffic is coming, for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.4 | TablercIpMrouteHwEgressVlansTable | not-accessible | current | The (conceptual) table containing egress vlan entries of multicast routing information for the Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.4.1 | RowrcIpMrouteHwEgressVlansEntry | not-accessible | current | An entry (conceptual row) containing egress vlan entries of multicast routing information for a particular Group Address. |
| 1.3.6.1.4.1.2272.1.8.24.4.1.1 | ColumnrcIpMrouteHwEgressVlansGroupAddress | read-only | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.4.1.2 | ColumnrcIpMrouteHwEgressVlansSubnet | read-only | current | The network address from where the source is sending the stream of traffic for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.4.1.3 | ColumnrcIpMrouteHwEgressVlansInvlan | read-only | current | The Ingress vlan Id from where the traffic is coming for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.4.1.4 | ColumnrcIpMrouteHwEgressVlansId | read-only | current | The Egress vlan Id from where the traffic is going out for which this entry contains multicast routing information |
| 1.3.6.1.4.1.2272.1.8.24.4.1.5 | ColumnrcIpMrouteHwEgressVlansPorts | read-only | current | he Egress vlan ports from where the traffic is going out for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.24.4.1.6 | ColumnrcIpMrouteHwEgressVlansIndex | read-only | current | This Index value keep tracks of the hardware record that has been accessed for displaying the entry containing multicast routing information. |
| 1.3.6.1.4.1.2272.1.8.25 | NodercIpResourceUsage | |||
| 1.3.6.1.4.1.2272.1.8.25.1 | NodercIpResourceUsageGlobal | |||
| 1.3.6.1.4.1.2272.1.8.25.1.1 | ScalarrcIpResourceUsageGlobalIngressRecInUse | read-only | current | Used to get the Ingress Record Usage in the switch. (S-G usage). |
| 1.3.6.1.4.1.2272.1.8.25.1.2 | ScalarrcIpResourceUsageGlobalEgressRecInUse | read-only | current | Used to get the Egress Record Usage in the switch (pepstream count). |
| 1.3.6.1.4.1.2272.1.8.25.1.3 | ScalarrcIpResourceUsageGlobalIngressThreshold | read-write | current | Used to get the threshold count for Ingress records. |
| 1.3.6.1.4.1.2272.1.8.25.1.4 | ScalarrcIpResourceUsageGlobalEgressThreshold | read-write | current | Used to get threshold count for egress records. |
| 1.3.6.1.4.1.2272.1.8.25.1.5 | ScalarrcIpResourceUsageGlobalSendTrapAndLog | read-write | current | A means of alerting the user. If this bool is set, a message will be send to console and also a duReport will be logged. |
| 1.3.6.1.4.1.2272.1.8.25.1.6 | ScalarrcIpResourceUsageGlobalSendTrapOnly | read-write | current | A means of alerting the user. If this bool is set, a message will be send to console. |
| 1.3.6.1.4.1.2272.1.8.25.1.7 | ScalarrcIpResourceUsageGlobalLogMsgOnly | read-write | current | A means of alerting the user.If this bool is set, a duReport will be logged. |
| 1.3.6.1.4.1.2272.1.8.26 | NodercIpRsmlt | |||
| 1.3.6.1.4.1.2272.1.8.26.1 | NodercIpRsmltGlobal | |||
| 1.3.6.1.4.1.2272.1.8.26.1.2 | ScalarrcIpRsmltEdgeSupportEnable | read-write | current | Used to enable/disable RSMLT Edge Support feature |
| 1.3.6.1.4.1.2272.1.8.26.2 | TablercIpRsmltOperTable | not-accessible | current | Route Smlt Table |
| 1.3.6.1.4.1.2272.1.8.26.2.1 | RowrcIpRsmltOperEntry | not-accessible | current | An entry of Ip As Path Access List Table. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.1 | ColumnrcIpRsmltOperIfIndex | read-only | current | Route Smlt Oper IfIndex. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.2 | ColumnrcIpRsmltOperAdminStatus | read-write | current | is a enable/disable flag. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.3 | ColumnrcIpRsmltOperHoldDownTimer | read-write | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.4 | ColumnrcIpRsmltOperHoldDownTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldDownTimer. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.5 | ColumnrcIpRsmltOperHoldUpTimer | read-write | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.6 | ColumnrcIpRsmltOperHoldUpTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldUpTimer. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.7 | ColumnrcIpRsmltOperIpAddr | read-only | current | IP Interface with RSMLT on. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.8 | ColumnrcIpRsmltOperOperStatus | read-only | current | The operation status of Rsmlt, up or down. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.9 | ColumnrcIpRsmltOperSmltId | read-only | current | The id range for SMLT is 1-32. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.11 | ColumnrcIpRsmltOperVlanId | read-only | current | Vlan id. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.12 | ColumnrcIpRsmltOperMacAddr | read-only | current | Mac Address. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.13 | ColumnrcIpRsmltOperRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.14 | ColumnrcIpRsmltOperVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Oper instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.2.1.15 | ColumnrcIpRsmltOperVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Oper instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.3 | TablercIpRsmltPeerTable | not-accessible | current | Route Smlt Table |
| 1.3.6.1.4.1.2272.1.8.26.3.1 | RowrcIpRsmltPeerEntry | not-accessible | current | An entry of Ip As Path Access List Table. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.1 | ColumnrcIpRsmltPeerIfIndex | read-only | current | Route Smlt Oper IfIndex. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.2 | ColumnrcIpRsmltPeerAdminStatus | read-only | current | is a enable/disable flag. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.3 | ColumnrcIpRsmltPeerHoldDownTimer | read-only | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.4 | ColumnrcIpRsmltPeerHoldDownTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldDownTimer. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.5 | ColumnrcIpRsmltPeerHoldUpTimer | read-only | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.6 | ColumnrcIpRsmltPeerHoldUpTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldUpTimer. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.7 | ColumnrcIpRsmltPeerIpAddr | read-only | current | IP Interface with RSMLT on. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.8 | ColumnrcIpRsmltPeerOperStatus | read-only | current | The operation status of Rsmlt, up or down. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.9 | ColumnrcIpRsmltPeerSmltId | read-only | current | The id range for SMLT is 1-32. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.11 | ColumnrcIpRsmltPeerVlanId | read-only | current | Vlan id. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.12 | ColumnrcIpRsmltPeerMacAddr | read-only | current | Mac Address. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.13 | ColumnrcIpRsmltPeerVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.3.1.14 | ColumnrcIpRsmltPeerVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.4 | TablercIpRsmltEdgePeerTable | not-accessible | current | RSMLT Edge Support Peer Info table. This table consists of the RSMLT Peers for which the switch will act as a PeerForwarder. |
| 1.3.6.1.4.1.2272.1.8.26.4.1 | RowrcIpRsmltEdgePeerEntry | not-accessible | current | RSMLT Edge Support Peer Info Entry |
| 1.3.6.1.4.1.2272.1.8.26.4.1.1 | ColumnrcIpRsmltEdgeVlanId | not-accessible | current | A value that uniquely identifies the Virtual LAN associated with this entry. |
| 1.3.6.1.4.1.2272.1.8.26.4.1.2 | ColumnrcIpRsmltEdgePeerIpAddress | read-only | current | IP address of the Peer RSMLT Interface. |
| 1.3.6.1.4.1.2272.1.8.26.4.1.3 | ColumnrcIpRsmltEdgePeerMacAddress | read-only | current | The MAC address of the Peer RSMLT interface. |
| 1.3.6.1.4.1.2272.1.8.26.4.1.4 | ColumnrcIpRsmltEdgePeerVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Edge Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.4.1.5 | ColumnrcIpRsmltEdgePeerVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Edge Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.5 | TablercIpv6RsmltOperTable | not-accessible | current | Route Smlt Table |
| 1.3.6.1.4.1.2272.1.8.26.5.1 | RowrcIpv6RsmltOperEntry | not-accessible | current | A local IPv6 RSMLT entry |
| 1.3.6.1.4.1.2272.1.8.26.5.1.1 | ColumnrcIpv6RsmltOperIfIndex | not-accessible | current | Route Smlt Oper IfIndex. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.2 | ColumnrcIpv6RsmltOperIpv6Addr | not-accessible | current | IPv6 Interface with RSMLT on. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.3 | ColumnrcIpv6RsmltOperIpv6PrefixLength | not-accessible | current | IPv6 Prefix Length. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.4 | ColumnrcIpv6RsmltOperAdminStatus | read-write | current | is a enable/disable flag. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.5 | ColumnrcIpv6RsmltOperHoldDownTimer | read-write | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.7 | ColumnrcIpv6RsmltOperHoldUpTimer | read-write | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.9 | ColumnrcIpv6RsmltOperOperStatus | read-only | current | The operation status of Rsmlt, up or down. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.10 | ColumnrcIpv6RsmltOperSmltId | read-only | current | The id range for SMLT is 1-32. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.12 | ColumnrcIpv6RsmltOperVlanId | read-only | current | Vlan id. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.13 | ColumnrcIpv6RsmltOperMacAddr | read-only | current | Mac Address. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.14 | ColumnrcIpv6RsmltOperVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Oper instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.5.1.15 | ColumnrcIpv6RsmltOperVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Oper instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.6 | TablercIpv6RsmltPeerTable | not-accessible | current | Route Smlt Peer Table |
| 1.3.6.1.4.1.2272.1.8.26.6.1 | RowrcIpv6RsmltPeerEntry | not-accessible | current | An entry of Ip As Path Access List Table. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.1 | ColumnrcIpv6RsmltPeerIfIndex | not-accessible | current | Route Smlt Oper IfIndex. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.2 | ColumnrcIpv6RsmltPeerIpv6Addr | not-accessible | current | IP Interface with RSMLT on. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.3 | ColumnrcIpv6RsmltPeerIpv6PrefixLength | not-accessible | current | IPv6 Prefix Length |
| 1.3.6.1.4.1.2272.1.8.26.6.1.4 | ColumnrcIpv6RsmltPeerAdminStatus | read-only | current | is a enable/disable flag. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.5 | ColumnrcIpv6RsmltPeerHoldDownTimer | read-only | current | Timer value, the range of value is from 0 to 3600. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.6 | ColumnrcIpv6RsmltPeerHoldDownTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldDownTimer. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.7 | ColumnrcIpv6RsmltPeerHoldUpTimer | read-only | current | The range of value 0 to 3600 or 9999. 9999 means infinity. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.8 | ColumnrcIpv6RsmltPeerHoldUpTimeRemaining | read-only | current | The time value that indicate how much time remaining of HoldUpTimer. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.9 | ColumnrcIpv6RsmltPeerOperStatus | read-only | current | The operation status of Rsmlt, up or down. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.10 | ColumnrcIpv6RsmltPeerSmltId | read-only | current | The id range for SMLT is 1-32. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.12 | ColumnrcIpv6RsmltPeerVlanId | read-only | current | Vlan id. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.13 | ColumnrcIpv6RsmltPeerMacAddr | read-only | current | Mac Address. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.14 | ColumnrcIpv6RsmltPeerVrfId | read-only | current | Indicates the Virtual Router to which the RSMLT Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.6.1.15 | ColumnrcIpv6RsmltPeerVrfName | read-only | current | Name of the Virtual Router to which the RSMLT Peer instance belongs. |
| 1.3.6.1.4.1.2272.1.8.26.7 | TablercIpv6RsmltEdgePeerTable | not-accessible | current | RSMLT Edge Support Peer Info table. This table consists of the RSMLT Peers for which the switch will act as a PeerForwarder. |
| 1.3.6.1.4.1.2272.1.8.26.7.1 | RowrcIpv6RsmltEdgePeerEntry | not-accessible | current | RSMLT Edge Support Peer Info Entry |
| 1.3.6.1.4.1.2272.1.8.26.7.1.1 | ColumnrcIpv6RsmltEdgePeerVlanId | not-accessible | current | A value that uniquely identifies the Virtual LAN associated with this entry. |
| 1.3.6.1.4.1.2272.1.8.26.7.1.2 | ColumnrcIpv6RsmltEdgePeerIpv6Address | not-accessible | current | IP address of the Peer RSMLT Interface. |
| 1.3.6.1.4.1.2272.1.8.26.7.1.3 | ColumnrcIpv6RsmltEdgePeerIpv6PrefixLength | not-accessible | current | If set then this prefix can be used for address autoconfig, passed opaquely to Infinity |
| 1.3.6.1.4.1.2272.1.8.26.7.1.4 | ColumnrcIpv6RsmltEdgePeerMacAddress | read-only | current | The MAC address of the Peer RSMLT interface. |
| 1.3.6.1.4.1.2272.1.8.29 | TablercIpDhcpOp82StatsTable | not-accessible | current | DHCP statistics table for Relay Agent Information Option |
| 1.3.6.1.4.1.2272.1.8.29.1 | RowrcIpDhcpOp82StatsEntry | not-accessible | current | Used to see current statistics on interfaces that have DHCP Option 82 (Relay Agent Information) enabled. This table is read-only. |
| 1.3.6.1.4.1.2272.1.8.29.1.1 | ColumnrcIpDhcpOp82StatsIfIndex | not-accessible | current | Interface number. The number can represent either a physical or logical(VLAN) interface. |
| 1.3.6.1.4.1.2272.1.8.29.1.2 | ColumnrcIpDhcpOp82StatsFoundOp82 | read-only | current | Represents the number of packets received on the interface that already had Dhcp Option 82 inserted in them |
| 1.3.6.1.4.1.2272.1.8.29.1.3 | ColumnrcIpDhcpOp82StatsDropped | read-only | current | Represents the number of packets dropped because of reasons related to Dhcp Option 82. These reasons could be that the packet was received from an untrusted so… |
| 1.3.6.1.4.1.2272.1.8.29.1.4 | ColumnrcIpDhcpOp82StatsCircuitId | read-only | current | Represents the value of CircuitId inserted in the packets. This is the Port number of the Dhcp Relay. |
| 1.3.6.1.4.1.2272.1.8.29.1.5 | ColumnrcIpDhcpOp82StatsAddedCircuitId | read-only | current | Represents the number of packets which had CircuitId inserted on this interface |
| 1.3.6.1.4.1.2272.1.8.29.1.6 | ColumnrcIpDhcpOp82StatsRemovedCircuitId | read-only | current | Represents the number of packets which had CircuitId removed on this interface |
| 1.3.6.1.4.1.2272.1.8.29.1.7 | ColumnrcIpDhcpOp82StatsRemoteId | read-only | current | Represents the value of RemoteId inserted in the packets. This is the Mac address of the Dhcp Relay. |
| 1.3.6.1.4.1.2272.1.8.29.1.8 | ColumnrcIpDhcpOp82StatsAddedRemoteId | read-only | current | Represents the number of packets which had RemoteId inserted on this interface |
| 1.3.6.1.4.1.2272.1.8.29.1.9 | ColumnrcIpDhcpOp82StatsRemovedRemoteId | read-only | current | Represents the number of packets which had RemoteId removed on this interface |
| 1.3.6.1.4.1.2272.1.8.29.1.10 | ColumnrcIpDhcpOp82StatsAgentAddr | read-only | current | The IP address configured as relay on this interface; it is either the IP of the physical interface or the IP of the VRRP address |
| 1.3.6.1.4.1.2272.1.8.100 | NodercIpGenPolicy | |||
| 1.3.6.1.4.1.2272.1.8.100.1 | ScalarrcIpAsPathAccessListTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.2 | TablercIpAsPathAccessListTable | not-accessible | current | IP As Path Access List table |
| 1.3.6.1.4.1.2272.1.8.100.2.1 | RowrcIpAsPathAccessListEntry | not-accessible | current | An entry of Ip As Path Access List Table. |
| 1.3.6.1.4.1.2272.1.8.100.2.1.1 | ColumnrcIpAsPathAccessListId | read-only | current | Path Access List entry Id. |
| 1.3.6.1.4.1.2272.1.8.100.2.1.2 | ColumnrcIpAsPathAccessListMemberId | read-only | current | frq. at which hello sent. |
| 1.3.6.1.4.1.2272.1.8.100.2.1.3 | ColumnrcIpAsPathAccessListMode | read-write | current | Path Access List Mode, permit or deny. |
| 1.3.6.1.4.1.2272.1.8.100.2.1.4 | ColumnrcIpAsPathAccessListAsRegularExpression | read-write | current | IP Path Access List Regular Expression |
| 1.3.6.1.4.1.2272.1.8.100.2.1.5 | ColumnrcIpAsPathAccessListRowStatus | read-write | current | Table row status. |
| 1.3.6.1.4.1.2272.1.8.100.3 | ScalarrcIpCommunityAccessListTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.4 | TablercIpCommunityAccessListTable | not-accessible | current | IP CommunityAccess List table |
| 1.3.6.1.4.1.2272.1.8.100.4.1 | RowrcIpCommunityAccessListEntry | not-accessible | current | An entry of Ip CommunityAccess List Table. |
| 1.3.6.1.4.1.2272.1.8.100.4.1.1 | ColumnrcIpCommunityAccessListId | read-only | current | IP CommunityAccess entry List Id |
| 1.3.6.1.4.1.2272.1.8.100.4.1.2 | ColumnrcIpCommunityAccessListMemberId | read-only | current | frq. at which hello sent. |
| 1.3.6.1.4.1.2272.1.8.100.4.1.3 | ColumnrcIpCommunityAccessListMode | read-write | current | IP Community Access List Mode, permit or deny. |
| 1.3.6.1.4.1.2272.1.8.100.4.1.4 | ColumnrcIpCommunityAccessListCommunity | read-write | current | IP Community Access List Community string. |
| 1.3.6.1.4.1.2272.1.8.100.4.1.5 | ColumnrcIpCommunityAccessListRowStatus | read-write | current | IP Community Access Table Row Status. |
| 1.3.6.1.4.1.2272.1.8.100.5 | ScalarrcIpAccessListTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.6 | TablercIpAccessListTable | not-accessible | current | IP Access List table |
| 1.3.6.1.4.1.2272.1.8.100.6.1 | RowrcIpAccessListEntry | not-accessible | current | An entry of Ip Access List Table. |
| 1.3.6.1.4.1.2272.1.8.100.6.1.1 | ColumnrcIpAccessListId | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.6.1.2 | ColumnrcIpAccessListMode | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.6.1.3 | ColumnrcIpAccessListNetwork | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.6.1.4 | ColumnrcIpAccessListNetworkMask | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.6.1.5 | ColumnrcIpAccessListName | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.6.1.6 | ColumnrcIpAccessListRowStatus | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.7 | ScalarrcIpExtendedAccessListTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.8 | TablercIpExtendedAccessListTable | not-accessible | current | IP Extended Access List table |
| 1.3.6.1.4.1.2272.1.8.100.8.1 | RowrcIpExtendedAccessListEntry | not-accessible | current | An entry of Ip Extended Access List Table. |
| 1.3.6.1.4.1.2272.1.8.100.8.1.1 | ColumnrcIpExtendedAccessListId | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.2 | ColumnrcIpExtendedAccessListMode | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.3 | ColumnrcIpExtendedAccessListNetwork | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.4 | ColumnrcIpExtendedAccessListNetworkWildCard | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.5 | ColumnrcIpExtendedAccessListNetworkMask | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.6 | ColumnrcIpExtendedAccessListNetworkMaskWildCard | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.7 | ColumnrcIpExtendedAccessListName | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.8.1.8 | ColumnrcIpExtendedAccessListRowStatus | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.9 | ScalarrcIpPrefixListTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.10 | TablercIpPrefixListTable | not-accessible | current | IP Prefix List table |
| 1.3.6.1.4.1.2272.1.8.100.10.1 | RowrcIpPrefixListEntry | not-accessible | current | An entry of Ip Prefix List Table. |
| 1.3.6.1.4.1.2272.1.8.100.10.1.1 | ColumnrcIpPrefixListId | read-only | current | ListId |
| 1.3.6.1.4.1.2272.1.8.100.10.1.2 | ColumnrcIpPrefixListPrefix | read-only | current | Is a member of a specific prefix list. Adding the prefix to the given prefix list |
| 1.3.6.1.4.1.2272.1.8.100.10.1.3 | ColumnrcIpPrefixListPrefixMaskLen | read-only | current | prefix mask length |
| 1.3.6.1.4.1.2272.1.8.100.10.1.4 | ColumnrcIpPrefixListMaskLenFrom | read-write | current | used with mask len |
| 1.3.6.1.4.1.2272.1.8.100.10.1.5 | ColumnrcIpPrefixListMaskLenUpto | read-write | current | used with mask len |
| 1.3.6.1.4.1.2272.1.8.100.10.1.6 | ColumnrcIpPrefixListName | read-write | current | list name |
| 1.3.6.1.4.1.2272.1.8.100.10.1.7 | ColumnrcIpPrefixListRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.8.100.11 | ScalarrcIpRoutePolicyTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.12 | ScalarrcIpRoutePolicyApply | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.13 | TablercIpRoutePolicyTable | not-accessible | current | IP Route Map table |
| 1.3.6.1.4.1.2272.1.8.100.13.1 | RowrcIpRoutePolicyEntry | not-accessible | current | An entry of Ip Route Map Table. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.1 | ColumnrcIpRoutePolicyId | read-only | current | Index used to identify a group of policies in the route policy tableRoute map id |
| 1.3.6.1.4.1.2272.1.8.100.13.1.2 | ColumnrcIpRoutePolicySequenceNumber | read-only | current | second index used to identify a specific policy with in the route policy group (grouped by Id). This field allows users to specify different MATCH, SET paramet… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.3 | ColumnrcIpRoutePolicyName | read-write | current | Is used to group a set of policies with different sequence number. Id & Name have one-on-one relationship. Different policy groups can contain same sequence nu… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.4 | ColumnrcIpRoutePolicyEnable | read-write | current | Value specified here indicate whether this policy is enabled or not. If disabled policy sould not be used. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.5 | ColumnrcIpRoutePolicyMode | read-write | current | specifies the action to be taken when this policy is selected for a specific route. This can be permit or deny or continue. Permit indicates allow the route, d… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.6 | ColumnrcIpRoutePolicyMatchProtocol | read-write | current | Match protocol. Used for RIP and DVMRP announce policy only. Value is one of multiple (logical 'OR) of the following values: direct(1), static(2), rip(4), ospf… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.7 | ColumnrcIpRoutePolicyMatchAsPath | read-write | current | Applicable to BGP protocol only. Match the BGP autonomous system path. This will override the BGP neighbor filter list info. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.8 | ColumnrcIpRoutePolicyMatchCommunity | read-write | current | Applicable to BGP protocol only. Filter incoming/outgoing updates based on communities. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.9 | ColumnrcIpRoutePolicyMatchCommunityExact | read-write | current | If enabled indicates the match has be an exact (i.e., all of the communities specified in the path has to be matched). |
| 1.3.6.1.4.1.2272.1.8.100.13.1.10 | ColumnrcIpRoutePolicyMatchNetwork | read-write | current | can specify one or more prefix list name or id(s) |
| 1.3.6.1.4.1.2272.1.8.100.13.1.11 | ColumnrcIpRoutePolicyMatchIpRouteSource | read-write | current | In case of Rip routes this is equivalent to RipInterface. In case of DVMRP routes this is equivalent to DVMRP gateway. Can specify one or more prefix list name… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.12 | ColumnrcIpRoutePolicyMatchNextHop | read-write | current | In case of Rip routes this is equivalent to RipInterface. In case of DVMRP routes this is equivalent to DVMRP gateway. Can specify one or more prefix list name… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.13 | ColumnrcIpRoutePolicyMatchInterface | read-write | current | Match received interface. Only for rip routes. Ignored in all other cases. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.14 | ColumnrcIpRoutePolicyMatchRouteType | read-write | current | For BGP this choice refers to locally generated routes external routes learned via ebgp nbr. For OSPF internal refers to intra and inter area routes (belongs t… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.15 | ColumnrcIpRoutePolicyMatchMetric | read-write | current | Match mec field in the incoming advertisement. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.16 | ColumnrcIpRoutePolicyMatchTag | read-write | current | specifies a list of tag(s), that will be used during the match criteria process.contains one or more tag values.. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.17 | ColumnrcIpRoutePolicySetRoutePreference | read-write | current | if non-zero specifies the route preference value to be assigned to the routes that applies this policy.contains one or more tag values.. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.18 | ColumnrcIpRoutePolicySetAsPath | read-write | current | The AS path vaule to be used whether the SetAsPathMode is Tag or Prepend.as-path string.. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.19 | ColumnrcIpRoutePolicySetAsPathMode | read-write | current | It can be either tag or prepend tag. applicable only while redistributing routes to BGP.Converts the tag of a route into AS path. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.20 | ColumnrcIpRoutePolicySetAutomaticTag | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.13.1.21 | ColumnrcIpRoutePolicySetCommunityNumber | read-write | current | this value can be a number (1..42949672000) or no-export or no-advertise. Applicable to BGP advertisments.community number. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.22 | ColumnrcIpRoutePolicySetCommunityMode | read-write | current | this value can be either append or none unchanged - keep the community attribute in the route path as it is. none - remove the community in the route path addi… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.23 | ColumnrcIpRoutePolicySetMetricTypeInternal | read-write | current | Indicates to set the MED value for routes advertised to ebgp nbrs to the IGP metric value. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.24 | ColumnrcIpRoutePolicySetMetric | read-write | current | Value of the metric to be used while sending an update for the routes that match the matching criteria in this route policy. Default - 0 indicates the internal… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.25 | ColumnrcIpRoutePolicySetMetricType | read-write | current | Metric type for the routes to be imported into OSPF routing protocol, which passed the matching criteria configured in this route policy. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.26 | ColumnrcIpRoutePolicySetNextHop | read-write | current | IpAddress of the next hop router. Ignored for DVMRP routes. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.27 | ColumnrcIpRoutePolicySetOrigin | read-write | current | igp/egp/incomplete Applicable to BGP protocol only. If not set uses the route origin from the Ip routing table (protocol). |
| 1.3.6.1.4.1.2272.1.8.100.13.1.28 | ColumnrcIpRoutePolicySetLocalPref | read-write | current | this value will be used during route decision process in the BGP protocol. Applicable to BGP only. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.29 | ColumnrcIpRoutePolicySetOriginEgpAs | read-write | current | indicates the Remote autonomous sys number. Applicable to BGP only. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.30 | ColumnrcIpRoutePolicySetTag | read-write | current | Value to be used for setting tag of the destination routing protocol. If not specified forward the tag value in the source routing protocol. Value 0 indicates … |
| 1.3.6.1.4.1.2272.1.8.100.13.1.31 | ColumnrcIpRoutePolicySetWeight | read-write | current | Should be using with match as-path condition. Weight value for the routing table. For BGP this value will override the weight configured through NetworkTableEn… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.32 | ColumnrcIpRoutePolicySetInjectNetList | read-write | current | specifies the prefix list to be used either for injecting the routes into the routing table or to include the networks in the advertisement. Ignored for DVMRP. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.33 | ColumnrcIpRoutePolicyRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.8.100.13.1.34 | ColumnrcIpRoutePolicySetMask | read-write | current | Set Mask Ip Address |
| 1.3.6.1.4.1.2272.1.8.100.13.1.35 | ColumnrcIpRoutePolicyNssaPbit | read-write | current | Set/Reset P bit in specified type 7 LSA. By default P bit is always set in case user set it to disable state for particular route policy than all type 7 LSAs a… |
| 1.3.6.1.4.1.2272.1.8.100.13.1.36 | ColumnrcIpRoutePolicyMatchVrf | read-write | current | An array used to identify which source VRFs have leaked routes to the local VRF |
| 1.3.6.1.4.1.2272.1.8.100.13.1.37 | ColumnrcIpRoutePolicyMatchExtCommunity | read-create | current | Filter incoming/outgoing updates based on communities |
| 1.3.6.1.4.1.2272.1.8.100.13.1.38 | ColumnrcIpRoutePolicySetExtCommunity | read-create | current | Set Extended-community string. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.39 | ColumnrcIpRoutePolicySetExtCommunityMode | read-create | current | This value can be either additive, unchanged or overwrite. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.40 | ColumnrcIpRoutePolicyMatchLocalPref | read-create | current | Match Local Prefix value. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.41 | ColumnrcIpRoutePolicyMatchIpRouteDest | read-create | current | to match route destination, one can specify one or more prefix list name(s) or id(s) separated by comma. |
| 1.3.6.1.4.1.2272.1.8.100.13.1.42 | ColumnrcIpRoutePolicySetLevel | read-create | current | Level of the Ip routing policy |
| 1.3.6.1.4.1.2272.1.8.100.13.1.43 | ColumnrcIpRoutePolicyIpv6SetNextHop | read-create | current | Address of the ipv6 next hop router. Ignored for DVMRP routes. |
| 1.3.6.1.4.1.2272.1.8.100.14 | ScalarrcIpRedistributeTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.15 | ScalarrcIpRedistributeApply | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.16 | TablercIpRedistributeTable | not-accessible | current | IP Redistribute table |
| 1.3.6.1.4.1.2272.1.8.100.16.1 | RowrcIpRedistributeEntry | not-accessible | current | An entry of Ip Redistribute Table. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.1 | ColumnrcIpRedistributeProtocol | read-only | current | Protocol is any one of the dynamic routing protocol, which is interested in receiving the external routing info. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.2 | ColumnrcIpRedistributeRouteSource | read-only | current | equivalent to the owner field in the routing table. This field indicates that the protocol is interested in knowing/not-knowing the routes learned from this so… |
| 1.3.6.1.4.1.2272.1.8.100.16.1.3 | ColumnrcIpRedistributeEnable | read-write | current | Enable/Disable. By default this is enabled. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.4 | ColumnrcIpRedistributeMetric | read-write | current | value of the metric to be announced in the advertisment |
| 1.3.6.1.4.1.2272.1.8.100.16.1.5 | ColumnrcIpRedistributeMetricType | read-write | current | specifies the type of the metric type, useful for OSPF and BGP only. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.6 | ColumnrcIpRedistributeMatchRouteType | read-write | current | used to filter a route based on the route type. applicable to BGP. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.7 | ColumnrcIpRedistributeSetTag | read-write | current | Tag value to be set in the advertisment. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.8 | ColumnrcIpRedistributeSubnets | read-write | current | applicable to OSPF only. Indicates that all the subnets need to be advertised individually. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.9 | ColumnrcIpRedistributeRoutePolicy | read-write | current | specify the route policy to achieve the final granularity in filtering to determine whether or not a specific route should be advertised to the given protocol.… |
| 1.3.6.1.4.1.2272.1.8.100.16.1.10 | ColumnrcIpRedistributeASNumber | read-write | current | Autonomous system number. Used only for the BGP protocol. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.11 | ColumnrcIpRedistributeWeight | read-write | current | used only for the BGP protocol. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.12 | ColumnrcIpRedistributeDefaultOriginate | read-write | current | indicates the given protocol will originate/advertise a default route. |
| 1.3.6.1.4.1.2272.1.8.100.16.1.13 | ColumnrcIpRedistributeRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.8.100.17 | ScalarrcIpOspfInFilterTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.18 | ScalarrcIpOspfInFilterApply | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.19 | TablercIpOspfInFilterTable | not-accessible | current | IP Ospf In Filter table |
| 1.3.6.1.4.1.2272.1.8.100.19.1 | RowrcIpOspfInFilterEntry | not-accessible | current | An entry of Ip Ospf In Filter Table. |
| 1.3.6.1.4.1.2272.1.8.100.19.1.1 | ColumnrcIpOspfInFilterAdvertisingRtr | read-only | current | |
| 1.3.6.1.4.1.2272.1.8.100.19.1.2 | ColumnrcIpOspfInFilterEnable | read-write | current | IfIndex |
| 1.3.6.1.4.1.2272.1.8.100.19.1.3 | ColumnrcIpOspfInFilterMetricType | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.19.1.4 | ColumnrcIpOspfInFilterPolicyName | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.19.1.5 | ColumnrcIpOspfInFilterRowStatus | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.100.20 | ScalarrcIpRoutePrefTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.21 | TablercIpRoutePrefTable | not-accessible | current | IP Route Pref table |
| 1.3.6.1.4.1.2272.1.8.100.21.1 | RowrcIpRoutePrefEntry | not-accessible | current | An entry of Ip Route Pref Table. |
| 1.3.6.1.4.1.2272.1.8.100.21.1.1 | ColumnrcIpRoutePrefProtocol | read-only | current | Protocol |
| 1.3.6.1.4.1.2272.1.8.100.21.1.2 | ColumnrcIpRoutePrefDefault | read-only | current | Shows the default preference value for the given protocol. |
| 1.3.6.1.4.1.2272.1.8.100.21.1.3 | ColumnrcIpRoutePrefConfigured | read-write | current | This value is configurable by the user |
| 1.3.6.1.4.1.2272.1.8.100.22 | TablercIpRedistributeInterVrfTable | not-accessible | current | IP Redistribute table for Inter-VRFs |
| 1.3.6.1.4.1.2272.1.8.100.22.1 | RowrcIpRedistributeInterVrfEntry | not-accessible | current | An entry of Ip Redistribute Table.(new) |
| 1.3.6.1.4.1.2272.1.8.100.22.1.1 | ColumnrcIpRedistributeInterVrfDstVrfId | not-accessible | current | dst VRF id used in the redistribution |
| 1.3.6.1.4.1.2272.1.8.100.22.1.2 | ColumnrcIpRedistributeInterVrfProtocol | not-accessible | current | Protocol is any one of the dynamic routing protocol, which is interested in receiving the external routing info. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.3 | ColumnrcIpRedistributeInterVrfSrcVrfId | not-accessible | current | src VRF id used in the redistribution |
| 1.3.6.1.4.1.2272.1.8.100.22.1.4 | ColumnrcIpRedistributeInterVrfRouteSource | not-accessible | current | equivalent to the owner field in the routing table. This field indicates that the protocol is interested in knowing/not-knowing the routes learned from this so… |
| 1.3.6.1.4.1.2272.1.8.100.22.1.5 | ColumnrcIpRedistributeInterVrfEnable | read-write | current | Enable/Disable. By default this is enabled. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.6 | ColumnrcIpRedistributeInterVrfMetric | read-write | current | value of the metric to be announced in the advertisment |
| 1.3.6.1.4.1.2272.1.8.100.22.1.7 | ColumnrcIpRedistributeInterVrfMetricType | read-write | current | specifies the type of the metric type, useful for OSPF and BGP only. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.8 | ColumnrcIpRedistributeInterVrfMatchRouteType | read-write | current | used to filter a route based on the route type. applicable to BGP. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.9 | ColumnrcIpRedistributeInterVrfSetTag | read-write | current | Tag value to be set in the advertisment. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.10 | ColumnrcIpRedistributeInterVrfSubnets | read-write | current | applicable to OSPF only. Indicates that all the subnets need to be advertised individually. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.11 | ColumnrcIpRedistributeInterVrfRoutePolicy | read-write | current | specify the route policy to achieve the final granularity in filtering to determine whether or not a specific route should be advertised to the given protocol.… |
| 1.3.6.1.4.1.2272.1.8.100.22.1.12 | ColumnrcIpRedistributeInterVrfASNumber | read-write | current | Autonomous system number. Used only for the BGP protocol. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.13 | ColumnrcIpRedistributeInterVrfWeight | read-write | current | used only for the BGP protocol. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.14 | ColumnrcIpRedistributeInterVrfDefaultOriginate | read-write | current | indicates the given protocol will originate/advertise a default route. |
| 1.3.6.1.4.1.2272.1.8.100.22.1.15 | ColumnrcIpRedistributeInterVrfRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.8.100.23 | ScalarrcIpExtCommunityAccessListTableSize | read-only | current | IP Extended Community Access List table size. |
| 1.3.6.1.4.1.2272.1.8.100.24 | TablercIpExtCommunityAccessListTable | not-accessible | current | IP Extended Community Access List table. |
| 1.3.6.1.4.1.2272.1.8.100.24.1 | RowrcIpExtCommunityAccessListEntry | not-accessible | current | An entry of Ip Extended Community Access List Table. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.1 | ColumnrcIpExtCommunityAccessListId | not-accessible | current | IP extended Community Access List Id |
| 1.3.6.1.4.1.2272.1.8.100.24.1.2 | ColumnrcIpExtCommunityAccessListMemberId | not-accessible | current | Member Id for the extended-community list to be added |
| 1.3.6.1.4.1.2272.1.8.100.24.1.3 | ColumnrcIpExtCommunityAccessListRTType | read-only | current | The route target Type for IP Extended Community rule in the list |
| 1.3.6.1.4.1.2272.1.8.100.24.1.4 | ColumnrcIpExtCommunityAccessListRTAddress | read-create | current | Extended community Ip address for the route-target type entry. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.5 | ColumnrcIpExtCommunityAccessListRTAsNumber | read-create | current | Extended community Asnumber for the route-target type entry. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.6 | ColumnrcIpExtCommunityAccessListRTAssignedNum | read-create | current | Extended community assigned number for the route-target type entry. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.7 | ColumnrcIpExtCommunityAccessListSooType | read-only | current | The site of origin Type for IP Extended Community Access List |
| 1.3.6.1.4.1.2272.1.8.100.24.1.8 | ColumnrcIpExtCommunityAccessListSooAddress | read-create | current | Extended community Ip address for the site-of-origin type of entry. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.9 | ColumnrcIpExtCommunityAccessListSooAsNumber | read-create | current | Extended community AsNumber for the site-of-origin type of entry. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.10 | ColumnrcIpExtCommunityAccessListSooAssignedNum | read-create | current | Extended community assigned number for the site-of-origin type of entry. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.11 | ColumnrcIpExtCommunityAccessListVrfId | read-create | current | VrfId for the extended-community Access list. |
| 1.3.6.1.4.1.2272.1.8.100.24.1.12 | ColumnrcIpExtCommunityAccessListRowStatus | read-create | current | IP Ext Community Table Row Status. |
| 1.3.6.1.4.1.2272.1.8.100.26 | ScalarrcIpPrefixListNameTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.100.27 | TablercIpPrefixListNameTable | not-accessible | current | Prefix List Name table |
| 1.3.6.1.4.1.2272.1.8.100.27.1 | RowrcIpPrefixListNameEntry | not-accessible | current | An entry of Prefix List Name Table. |
| 1.3.6.1.4.1.2272.1.8.100.27.1.1 | ColumnrcIpPrefixListNameId | not-accessible | current | list id |
| 1.3.6.1.4.1.2272.1.8.100.27.1.2 | ColumnrcIpPrefixListNameName | read-only | current | list name |
| 1.3.6.1.4.1.2272.1.8.100.28 | TablercIpRoutePolicyNameTable | not-accessible | current | Route Policy Name table for all VRFs |
| 1.3.6.1.4.1.2272.1.8.100.28.1 | RowrcIpRoutePolicyNameEntry | not-accessible | current | An entry of Route Policy Name Table. |
| 1.3.6.1.4.1.2272.1.8.100.28.1.1 | ColumnrcIpRoutePolicyNameVrfId | not-accessible | current | route policy vrfId |
| 1.3.6.1.4.1.2272.1.8.100.28.1.2 | ColumnrcIpRoutePolicyNameId | not-accessible | current | route policy id |
| 1.3.6.1.4.1.2272.1.8.100.28.1.3 | ColumnrcIpRoutePolicyNameName | read-only | current | route policy name |
| 1.3.6.1.4.1.2272.1.8.101 | NodercIpBgp | |||
| 1.3.6.1.4.1.2272.1.8.101.1 | NodercIpBgpGeneralGroup | |||
| 1.3.6.1.4.1.2272.1.8.101.1.1 | ScalarrcIpBgpGeneralGroupLocalAs | read-write | current | Local Autonomous system number |
| 1.3.6.1.4.1.2272.1.8.101.1.2 | ScalarrcIpBgpGeneralGroupAdminStatus | read-write | current | Disable or Enable group administrative |
| 1.3.6.1.4.1.2272.1.8.101.1.3 | ScalarrcIpBgpGeneralGroupDefaultMetric | read-write | current | The default-metric is used in conjunction with the redistribute router configuration command to cause the bgp routing protocol to use this metric as MED |
| 1.3.6.1.4.1.2272.1.8.101.1.4 | ScalarrcIpBgpGeneralGroupDefaultLocalPreference | read-write | current | Default local preference attribute value to be used |
| 1.3.6.1.4.1.2272.1.8.101.1.5 | ScalarrcIpBgpGeneralGroupDefaultInformationOriginate | read-write | current | allows the redistribution of network 0.0.0.0 into BGP |
| 1.3.6.1.4.1.2272.1.8.101.1.6 | ScalarrcIpBgpGeneralGroupBestPathMissingAsWorst | read-write | current | Enable to consider a missing MED attribute in a path as having a value of infinity, making the path without a MED value the least desirable path. To return the… |
| 1.3.6.1.4.1.2272.1.8.101.1.7 | ScalarrcIpBgpGeneralGroupBestPathMedConfed | read-write | current | To enable MED comparison among paths learned from confederation peers. Disable to prevent considering the MED attribute in comparing paths |
| 1.3.6.1.4.1.2272.1.8.101.1.8 | ScalarrcIpBgpGeneralGroupIgnoreIllegalRouterId | read-write | current | Configures BGP to overlook an illegal router ID. Enables or disable accepting a connection from a peer that sends its open message with a router ID of 0. |
| 1.3.6.1.4.1.2272.1.8.101.1.9 | ScalarrcIpBgpGeneralGroupAlwaysCompareMed | read-write | current | Enable to allow the comparison of the Multi Exit Discriminator (MED) for paths from neighbors in different autonomous systems. |
| 1.3.6.1.4.1.2272.1.8.101.1.10 | ScalarrcIpBgpGeneralGroupAutoPeerRestart | read-write | current | Enable the feature that automatically restarts the connection to a BGP peer when the connection goes down. |
| 1.3.6.1.4.1.2272.1.8.101.1.11 | ScalarrcIpBgpGeneralGroupAutoSummary | read-write | current | Enable BGP to summarize networks based on class limlts (Class A,B,C networks). |
| 1.3.6.1.4.1.2272.1.8.101.1.12 | ScalarrcIpBgpGeneralGroupSynchronization | read-write | current | Enables and disables the router from accepting routes from BGP peers without waiting for an update from the IBGP. |
| 1.3.6.1.4.1.2272.1.8.101.1.13 | ScalarrcIpBgpGeneralGroupMaxEqualcostRoutes | read-write | current | Sets the number of maximum number of equal-cost routes that can be stored in the routing table. |
| 1.3.6.1.4.1.2272.1.8.101.1.14 | ScalarrcIpBgpGeneralGroupIbgpReportImportRoute | read-write | current | Configure BGP to report imported routes to an interior BGP peer. |
| 1.3.6.1.4.1.2272.1.8.101.1.15 | ScalarrcIpBgpGeneralGroupAggregate | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.101.1.16 | ScalarrcIpBgpGeneralGroupFlapDampEnable | read-write | current | Enabled or Disabled |
| 1.3.6.1.4.1.2272.1.8.101.1.17 | ScalarrcIpBgpGeneralGroupDebugMask | read-write | current | value is one of multiple (logically by 'OR' of following value: none (0), error(1), packet(2), event(4), trace(8), warning(16), state(32), init(64), filter(128… |
| 1.3.6.1.4.1.2272.1.8.101.1.18 | ScalarrcIpBgpGeneralGroupTrapEnable | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.101.1.19 | ScalarrcIpBgpGeneralGroupQuickStart | read-write | current | Enable the flag to avoid flap penalty and trigger the peer start event quickly |
| 1.3.6.1.4.1.2272.1.8.101.1.20 | ScalarrcIpBgpGeneralGroupDeterministicMed | read-write | current | Enable to allow the comparison of the Multi Exit Discriminator (MED) for paths from neighbors in same autonomous system. |
| 1.3.6.1.4.1.2272.1.8.101.1.21 | ScalarrcIpBgpGeneralGroupRouteRefresh | read-create | current | Route Refresh for Bgp. |
| 1.3.6.1.4.1.2272.1.8.101.1.22 | ScalarrcIpBgpGeneralGroupRoutePolicyIn | read-create | current | Route Policy Name that will be applied to all routes which enter the VRF table. |
| 1.3.6.1.4.1.2272.1.8.101.1.23 | ScalarrcIpBgpGeneralGroupRoutePolicyOut | read-create | current | Route policy name that will be applied to all routes which are sent out of this VRF instance. |
| 1.3.6.1.4.1.2272.1.8.101.1.24 | ScalarrcIpBgpGeneralGroupDefaultInformationOriginateIpv6 | read-write | current | allows the redistribution of default ipv6 network into BGP |
| 1.3.6.1.4.1.2272.1.8.101.1.25 | ScalarrcIpBgpGeneralGroupNewLocalAs | read-write | current | Local Autonomous system number |
| 1.3.6.1.4.1.2272.1.8.101.1.26 | ScalarrcIpBgpGeneralGroup4ByteAs | read-write | current | 4 Byte As number enable |
| 1.3.6.1.4.1.2272.1.8.101.1.27 | ScalarrcIpBgpGeneralGroupAsDot | read-write | current | As number in Dot format |
| 1.3.6.1.4.1.2272.1.8.101.2 | ScalarrcIpBgpAggregateTableSize | read-only | deprecated | Size of Aggregate Table |
| 1.3.6.1.4.1.2272.1.8.101.3 | TablercIpBgpAggregateTable | not-accessible | deprecated | To specify the list of aggregate prefixes to be created by the BGP routing process and the options to be used while aggregating. |
| 1.3.6.1.4.1.2272.1.8.101.3.1 | RowrcIpBgpAggregateEntry | not-accessible | current | An entry of rcIpBgp Aggregate Address In Table. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.1 | ColumnrcIpBgpAggregateAddress | read-only | current | Prefix to create an aggregate address in BGP routing table. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.2 | ColumnrcIpBgpAggregateMask | read-only | current | Mask for the aggregrate |
| 1.3.6.1.4.1.2272.1.8.101.3.1.3 | ColumnrcIpBgpAggregateAsSetGenerate | read-write | current | Enable Generates autonomous system set path information. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.4 | ColumnrcIpBgpAggregateSummaryOnly | read-write | current | Filters all more specific routes from updates. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.5 | ColumnrcIpBgpAggregateSuppressPolicy | read-write | current | Name of route policy used to select the routes to be suppressed. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.6 | ColumnrcIpBgpAggregateAdvertisePolicy | read-write | current | Name of route policy used to select the routes to create AS-SET origin communities. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.7 | ColumnrcIpBgpAggregateAttributePolicy | read-write | current | Name of route policy used to set the attribute of the aggregate route. |
| 1.3.6.1.4.1.2272.1.8.101.3.1.8 | ColumnrcIpBgpAggregateRowStatus | read-write | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.8.101.4 | NodercIpBgpConfederationGroup | |||
| 1.3.6.1.4.1.2272.1.8.101.4.1 | ScalarrcIpBgpConfederationIdentifier | read-write | current | Confederation AS identifier |
| 1.3.6.1.4.1.2272.1.8.101.4.2 | ScalarrcIpBgpConfederationPeers | read-write | current | The string represents ConfederatoinPeers as <length, value>. Maximum size 255,if any, will not be recorded by this object. The length is a 1-octet field contai… |
| 1.3.6.1.4.1.2272.1.8.101.5 | NodercIpBgpRouteReflectorGroup | |||
| 1.3.6.1.4.1.2272.1.8.101.5.1 | ScalarrcIpBgpRouteReflectionEnable | read-write | current | Enable Route Reflection on this router |
| 1.3.6.1.4.1.2272.1.8.101.5.2 | ScalarrcIpBgpRouteReflectorClusterId | read-write | current | Cluster ID of this router acting as a route reflector |
| 1.3.6.1.4.1.2272.1.8.101.5.3 | ScalarrcIpBgpRouteReflectorClientToClientReflection | read-write | current | When this router is configured as a route reflector, and the clients are fully meshed, a Disable value disables reflection of routes from one client to another. |
| 1.3.6.1.4.1.2272.1.8.101.5.4 | ScalarrcIpBgpRouteReflectionOperState | read-only | current | Displays the current route reflection operational state |
| 1.3.6.1.4.1.2272.1.8.101.6 | ScalarrcIpBgpNetworkTableSize | read-only | deprecated | Network Prefix table size |
| 1.3.6.1.4.1.2272.1.8.101.7 | TablercIpBgpNetworkTable | not-accessible | deprecated | The networks in this table are either static/directly connected or learned routes. Bgp advertises these network provided they are reachable and are in the IP r… |
| 1.3.6.1.4.1.2272.1.8.101.7.1 | RowrcIpBgpNetworkEntry | not-accessible | current | An entry In NetworkTable. |
| 1.3.6.1.4.1.2272.1.8.101.7.1.1 | ColumnrcIpBgpNetworkAddr | read-write | current | Network prefix that BGP will advertise. |
| 1.3.6.1.4.1.2272.1.8.101.7.1.2 | ColumnrcIpBgpNetworkMask | read-only | current | Network mask |
| 1.3.6.1.4.1.2272.1.8.101.7.1.3 | ColumnrcIpBgpNetworkRowStatus | read-write | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.8.101.7.1.4 | ColumnrcIpBgpNetworkMetric | read-write | current | Value of the metric to be used while sending an update for the routes from the network table. Indicates to set the MED value for the routes advertised to ebgp … |
| 1.3.6.1.4.1.2272.1.8.101.8 | ScalarrcIpBgpPeerTableSize | read-only | deprecated | BGP peer table size |
| 1.3.6.1.4.1.2272.1.8.101.9 | TablercIpBgpPeerTable | not-accessible | deprecated | IP BGP Peer table |
| 1.3.6.1.4.1.2272.1.8.101.9.1 | RowrcIpBgpPeerEntry | not-accessible | current | An entry of Ip rcIpBgp Peer Table. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.1 | ColumnrcIpBgpPeerEnable | read-write | current | Enable/Disable: controls whether the peer connection is enabled or disabled |
| 1.3.6.1.4.1.2272.1.8.101.9.1.2 | ColumnrcIpBgpPeerIpAddress | read-only | current | The Ip address of this peer |
| 1.3.6.1.4.1.2272.1.8.101.9.1.3 | ColumnrcIpBgpPeerRemoteAs | read-write | current | Remote Autonomous system number of this peer |
| 1.3.6.1.4.1.2272.1.8.101.9.1.4 | ColumnrcIpBgpPeerGroupName | read-write | current | Peer group name to which this peer belongs (optional) |
| 1.3.6.1.4.1.2272.1.8.101.9.1.5 | ColumnrcIpBgpPeerDefaultOriginate | read-write | current | To allow a BGP speaker (the local router) to send the default route 0.0.0.0 to a neighbor for use as a default route |
| 1.3.6.1.4.1.2272.1.8.101.9.1.6 | ColumnrcIpBgpPeerEbgpMultiHop | read-write | current | To accept and attempt BGP connections to external peers residing on networks that are not directly connected |
| 1.3.6.1.4.1.2272.1.8.101.9.1.7 | ColumnrcIpBgpPeerAdvertisementInterval | read-write | current | To set the minimum interval between the sending of BGP routing updates Time in seconds. Integer from 5 to 120. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.8 | ColumnrcIpBgpPeerPassword | read-write | current | To enable MD5 authentication on a TCP connection between two BGP peers Case-sensitive password of up to 80 character |
| 1.3.6.1.4.1.2272.1.8.101.9.1.9 | ColumnrcIpBgpPeerWeight | read-write | current | To assign an absolute weight to a BGP network. It can be an integer from 0 to 65535. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.10 | ColumnrcIpBgpPeerMaxPrefix | read-write | current | Sets a limit on the number of routes that will be accepted from a neighbor. A value of zero indicates no limit |
| 1.3.6.1.4.1.2272.1.8.101.9.1.11 | ColumnrcIpBgpPeerNextHopSelf | read-write | current | Set NextHop Attribute to local router address before sending updates to remote peer |
| 1.3.6.1.4.1.2272.1.8.101.9.1.12 | ColumnrcIpBgpPeerRoutePolicyIn | read-write | current | Route Policy Name that will be applied to all networks learned from this peer |
| 1.3.6.1.4.1.2272.1.8.101.9.1.13 | ColumnrcIpBgpPeerRoutePolicyOut | read-write | current | Route policy name that will be applied to all outgoing updates |
| 1.3.6.1.4.1.2272.1.8.101.9.1.14 | ColumnrcIpBgpPeerRouteReflectorClient | read-write | current | Indicates whether this peer is a route reflector client. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.15 | ColumnrcIpBgpPeerSoftReconfigurationIn | read-write | current | If Peer soft reconfiguration is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection. … |
| 1.3.6.1.4.1.2272.1.8.101.9.1.16 | ColumnrcIpBgpPeerSoftReconfiguration | read-write | current | If rcIpBgpPeerSoftReconfigurationIn is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp conne… |
| 1.3.6.1.4.1.2272.1.8.101.9.1.17 | ColumnrcIpBgpPeerRemovePrivateAs | read-write | current | Enable and disable private AS number from being stripped when sending an update |
| 1.3.6.1.4.1.2272.1.8.101.9.1.18 | ColumnrcIpBgpPeerRowStatus | read-write | current | Used to create/delete entries in the Table. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.19 | ColumnrcIpBgpPeerMD5Authentication | read-write | current | Enable and Disable MD5 authentication |
| 1.3.6.1.4.1.2272.1.8.101.9.1.20 | ColumnrcIpBgpPeerDebugMask | read-write | current | value is one of multiple (logically by 'OR' of following value: none (0), error(1), packet(2), event(4), trace(8), warning(16), state(32), init(64), filter(128… |
| 1.3.6.1.4.1.2272.1.8.101.9.1.21 | ColumnrcIpBgpPeerSendCommunity | read-write | current | |
| 1.3.6.1.4.1.2272.1.8.101.9.1.22 | ColumnrcIpBgpPeerUpdateSourceInterface | read-write | current | The IP address to be used for Circuitless IP. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.25 | ColumnrcIpBgpPeerState | read-only | current | The BGP peer connection state. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.26 | ColumnrcIpBgpPeerLastError | read-only | current | The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte … |
| 1.3.6.1.4.1.2272.1.8.101.9.1.27 | ColumnrcIpBgpPeerVpnv4Address | read-create | current | The vpnv4 routes specified. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.28 | ColumnrcIpBgpPeerIpvpnLiteCap | read-create | current | The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.29 | ColumnrcIpBgpPeerSooAddress | read-create | current | The site-of-origin ip address. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.30 | ColumnrcIpBgpPeerSooAsNumber | read-create | current | The asnum for the site-of-origin for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.31 | ColumnrcIpBgpPeerSooAssignedNum | read-create | current | The Assigned number required along with asnum or address to configure the site-of-origin for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.32 | ColumnrcIpBgpPeerSooType | read-only | current | The soo type can be asnum or ipaddress. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.33 | ColumnrcIpBgpPeerRouteRefresh | read-create | current | Route refresh for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.34 | ColumnrcIpBgpPeerAsOverride | read-create | current | The AS Override value can be enabled or disabled for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.9.1.35 | ColumnrcIpBgpPeerAllowAsIn | read-create | current | The number of as-in allowed for bgp peer |
| 1.3.6.1.4.1.2272.1.8.101.10 | ScalarrcIpBgpPeerGroupTableSize | read-only | current | BGP Peer Group table size |
| 1.3.6.1.4.1.2272.1.8.101.11 | TablercIpBgpPeerGroupTable | not-accessible | current | IP rcIpBgp Peer Group table. This table contains rows which are template configuration parameters which are shared by a group of peers. Peers belonging to the … |
| 1.3.6.1.4.1.2272.1.8.101.11.1 | RowrcIpBgpPeerGroupEntry | not-accessible | current | An entry of Ip rcIpBgp Peer Group Table. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.1 | ColumnrcIpBgpPeerGroupEnable | read-create | current | Allows disabling a group of peers |
| 1.3.6.1.4.1.2272.1.8.101.11.1.2 | ColumnrcIpBgpPeerGroupIndex | read-only | current | Index in to the Peer Group Table |
| 1.3.6.1.4.1.2272.1.8.101.11.1.3 | ColumnrcIpBgpPeerGroupGroupName | read-create | current | Name of the BGP peer group to which this neighbor belong |
| 1.3.6.1.4.1.2272.1.8.101.11.1.4 | ColumnrcIpBgpPeerGroupRemoteAs | read-create | current | Remote Autonomous system number of this peer group (optional) |
| 1.3.6.1.4.1.2272.1.8.101.11.1.5 | ColumnrcIpBgpPeerGroupDefaultOriginate | read-create | current | Enabling this attribute allows a BGP speaker (the local router) to send the default route 0.0.0.0 to the group of neighbors for use as a default route. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.6 | ColumnrcIpBgpPeerGroupEbgpMultiHop | read-create | current | To accept and attempt BGP connections to external peers residing on networks that are not directly connected |
| 1.3.6.1.4.1.2272.1.8.101.11.1.7 | ColumnrcIpBgpPeerGroupAdvertisementInterval | read-create | current | To set the minimum interval between the sending of BGP routing updates Time in seconds. Integer from 1 to 120. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.8 | ColumnrcIpBgpPeerGroupKeepAlive | read-create | current | To set the time interval in seconds between the sending of BGP keep alive messages to remote peers. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.9 | ColumnrcIpBgpPeerGroupHoldTime | read-create | current | To configure the hold time for the group of peers in seconds. Usually set to three times the value of the Keepalive time |
| 1.3.6.1.4.1.2272.1.8.101.11.1.10 | ColumnrcIpBgpPeerGroupWeight | read-create | current | To assign an absolute weight to a BGP network. Absolute weight, or importance. It can be an integer from 0 to 65535. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.11 | ColumnrcIpBgpPeerGroupMaxPrefix | read-create | current | Sets a limit on the number of routes that will be accepted from this group of neighbors. A value of zero indicates no limit |
| 1.3.6.1.4.1.2272.1.8.101.11.1.12 | ColumnrcIpBgpPeerGroupNextHopSelf | read-create | current | Set NextHop Attribute to local router address before sending updates to remote peers |
| 1.3.6.1.4.1.2272.1.8.101.11.1.13 | ColumnrcIpBgpPeerGroupRoutePolicyIn | read-create | current | Route Policy Name that will be applied to all networks learned from this group of peers |
| 1.3.6.1.4.1.2272.1.8.101.11.1.14 | ColumnrcIpBgpPeerGroupRoutePolicyOut | read-create | current | Route policy name that will be applied to all outgoing updates to this group of peers |
| 1.3.6.1.4.1.2272.1.8.101.11.1.15 | ColumnrcIpBgpPeerGroupRouteReflectorClient | read-create | current | Indicates whether this group of peers is a route reflector client. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.16 | ColumnrcIpBgpPeerGroupSoftReconfigurationIn | read-create | current | If Peer soft reconfiguration is enabled in the in bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection. … |
| 1.3.6.1.4.1.2272.1.8.101.11.1.17 | ColumnrcIpBgpPeerGroupSoftReconfiguration | read-write | current | If Peer soft reconfiguration-in is enabled in the in bound direction, policy can be changed and routes can re-learned without having to reset the bgp connectio… |
| 1.3.6.1.4.1.2272.1.8.101.11.1.18 | ColumnrcIpBgpPeerGroupPassword | read-create | current | To enable MD5 authentication on TCP connections between this local speaker and this group of BGP peers. Case-sensitive password of up to 80 character |
| 1.3.6.1.4.1.2272.1.8.101.11.1.19 | ColumnrcIpBgpPeerGroupRemovePrivateAs | read-create | current | Enable and disable private AS number from being stripped when sending an update |
| 1.3.6.1.4.1.2272.1.8.101.11.1.20 | ColumnrcIpBgpPeerGroupRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.2272.1.8.101.11.1.21 | ColumnrcIpBgpPeerGroupMD5Authentication | read-create | current | Enable and Disable MD5 authentication |
| 1.3.6.1.4.1.2272.1.8.101.11.1.22 | ColumnrcIpBgpPeerGroupSendCommunity | read-create | current | Enables or disables sending the update message community attribute to the specified peer. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.23 | ColumnrcIpBgpPeerGroupUpdateSourceInterface | read-create | current | The IP address to used for circuitless IP for this peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.24 | ColumnrcIpBgpPeerGroupVpnv4Address | read-create | current | The vpnv4 routes specified. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.25 | ColumnrcIpBgpPeerGroupIpvpnLiteCap | read-create | current | The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.30 | ColumnrcIpBgpPeerGroupRouteRefresh | read-create | current | Route refresh for bgp peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.31 | ColumnrcIpBgpPeerGroupAsOverride | read-create | current | The AS Override value can be enabled or disabled for bgp peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.32 | ColumnrcIpBgpPeerGroupAllowAsIn | read-create | current | The number of as-in allowed for bgp peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.33 | ColumnrcIpBgpPeerGroupDefaultOriginateIpv6 | read-create | current | Enabling this attribute allows a BGP speaker (the local router) to send the default route to the group of neighbors for use as a default route. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.34 | ColumnrcIpBgpPeerGroupAfUpdateSourceInterfaceType | read-create | current | The Inet address type used for circuitless IP for this peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.35 | ColumnrcIpBgpPeerGroupAfUpdateSourceInterface | read-create | current | The Inet address to used for circuitless IP for this peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.36 | ColumnrcIpBgpPeerGroupIpv6Cap | read-create | current | The ipv6 capability can be enabled or disabled on the bgp neighbor peer group. |
| 1.3.6.1.4.1.2272.1.8.101.11.1.37 | ColumnrcIpBgpPeerGroupIpv6RoutePolicyIn | read-create | current | Ipv6 Route Policy Name that will be applied to all networks learned from this group of peers |
| 1.3.6.1.4.1.2272.1.8.101.11.1.38 | ColumnrcIpBgpPeerGroupIpv6RoutePolicyOut | read-create | current | Ipv6 Route policy name that will be applied to all outgoing updates to this group of peers |
| 1.3.6.1.4.1.2272.1.8.101.12 | ScalarrcIpBgpRcvdDampenedPathAttrTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.101.13 | TablercIpBgpRcvdDampenedPathAttrTable | not-accessible | current | This table contains info about paths to destination networks received from all BGP-4 peers |
| 1.3.6.1.4.1.2272.1.8.101.13.1 | RowrcIpBgpDampenedPathAttrEntry | not-accessible | current | Information about a path to a networks |
| 1.3.6.1.4.1.2272.1.8.101.13.1.1 | ColumnrcIpBgpPathAttrPeer | read-only | current | The IP address of the peer where the path info was learned |
| 1.3.6.1.4.1.2272.1.8.101.13.1.2 | ColumnrcIpBgpPathAttrIpAddrPrefixLen | read-only | current | Length in bits of the IP address prefix in the network Layer Reachablity Information field. |
| 1.3.6.1.4.1.2272.1.8.101.13.1.3 | ColumnrcIpBgpPathAttrIpAddrPrefix | read-only | current | An Ip address prefix in the NLRI Information field. This object is an IP address containing the prefix with length specified by rcIpBgpPathAttrIpAddrPrefixLen … |
| 1.3.6.1.4.1.2272.1.8.101.13.1.4 | ColumnrcIpBgpPathAttrFlapPenalty | read-only | current | Penalty value based on number of route flaps |
| 1.3.6.1.4.1.2272.1.8.101.13.1.5 | ColumnrcIpBgpPathAttrFlapCount | read-only | current | Number of times a route flapped since the last time the penalty was reset to zero |
| 1.3.6.1.4.1.2272.1.8.101.13.1.6 | ColumnrcIpBgpPathAttrRouteDampened | read-only | current | Shows whether this route is currently suppressed from being announced |
| 1.3.6.1.4.1.2272.1.8.101.13.1.7 | ColumnrcIpBgpPathAttrReuseTime | read-only | current | Re use time is the system configured time for route reuse |
| 1.3.6.1.4.1.2272.1.8.101.13.1.8 | ColumnrcIpBgpPathAttrReuseTimeRemain | read-only | current | Re use time Remain is the number of seconds before the route will be reused |
| 1.3.6.1.4.1.2272.1.8.101.14 | ScalarrcIpBgp4PathAttrTableSize | read-only | current | table size |
| 1.3.6.1.4.1.2272.1.8.101.15 | TablercIpBgp4PathAttrTable | not-accessible | current | This table contains info about paths to destination networks received from all BGP-4 peers |
| 1.3.6.1.4.1.2272.1.8.101.15.1 | RowrcIpBgp4PathAttrEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.8.101.15.1.1 | ColumnrcIpBgp4PathAttrPeer | read-only | current | The IP address of the peer where the path info was learned |
| 1.3.6.1.4.1.2272.1.8.101.15.1.2 | ColumnrcIpBgp4PathAttrIpAddrPrefixLen | read-only | current | Length in bits of the IP address prefix in the network Layer Reachablity Information field. |
| 1.3.6.1.4.1.2272.1.8.101.15.1.3 | ColumnrcIpBgp4PathAttrIpAddrPrefix | read-only | current | An Ip address prefix in the NLRI Information field. This object is an IP address containing the prefix with length specified by rcIpBgpPathAttrIpAddrPrefixLen … |
| 1.3.6.1.4.1.2272.1.8.101.15.1.4 | ColumnrcIpBgp4PathAttrCommunities | read-only | current | The string represents community path attributes as <length,value> The length is a 1-octet field containing the numbner of community numbers in the value field.… |
| 1.3.6.1.4.1.2272.1.8.101.15.1.5 | ColumnrcIpBgp4PathAttrOriginateId | read-only | current | The IP address of the route who originates the routes |
| 1.3.6.1.4.1.2272.1.8.101.15.1.6 | ColumnrcIpBgp4PathAttrClusterId | read-only | current | The string represents Cluster Id path attributes as <length,value> The length is a 1-octet field containing the number of Cluster Id numbers in the value field… |
| 1.3.6.1.4.1.2272.1.8.101.16 | NodercIpBgpExt | |||
| 1.3.6.1.4.1.2272.1.8.101.16.1 | ScalarrcIpBgpExtAggregateAfTableSize | read-only | current | Size of address family independent bgp aggregate table |
| 1.3.6.1.4.1.2272.1.8.101.16.2 | TablercIpBgpExtAggregateAfTable | not-accessible | current | Replaces rcIpBgpAggregateTable. To specify the list of ipv4 and ipv6 aggregate prefixes to be created by the BGP routing process and the options to be used whi… |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1 | RowrcIpBgpExtAggregateAfEntry | not-accessible | current | An entry of v4/v6 aggregate prefix to be created by BGP routing process and the options to be used while aggregating. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.1 | ColumnrcIpBgpExtAggregateAfAddressType | not-accessible | current | Inet Address Type of aggregate address. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.2 | ColumnrcIpBgpExtAggregateAfAddress | not-accessible | current | V4 or V6 Prefix to create an aggregate address in BGP routing table. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.3 | ColumnrcIpBgpExtAggregateAfPrefixLen | not-accessible | current | Prefix length of the aggregate inet address |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.4 | ColumnrcIpBgpExtAggregateAfAsSetGenerate | read-create | current | Enable Generates autonomous system set path information. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.5 | ColumnrcIpBgpExtAggregateAfSummaryOnly | read-create | current | Filters all more specific routes from updates. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.6 | ColumnrcIpBgpExtAggregateAfSuppressPolicy | read-create | current | Name of route policy used to select the routes to be suppressed. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.7 | ColumnrcIpBgpExtAggregateAfAdvertisePolicy | read-create | current | Name of route policy used to select the routes to create AS-SET origin communities. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.8 | ColumnrcIpBgpExtAggregateAfAttributePolicy | read-create | current | Name of route policy used to set the attribute of the aggregate route. |
| 1.3.6.1.4.1.2272.1.8.101.16.2.1.9 | ColumnrcIpBgpExtAggregateAfRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.8.101.16.3 | ScalarrcIpBgpExtNetworkAfTableSize | read-only | current | Address family independent bgp Network Prefix table size |
| 1.3.6.1.4.1.2272.1.8.101.16.4 | TablercIpBgpExtNetworkAfTable | not-accessible | current | This table replaces rcIpBgpNetworkTable. This table supports V4 and V6 BGP networks. The networks in this table are either static/directly connected or learned… |
| 1.3.6.1.4.1.2272.1.8.101.16.4.1 | RowrcIpBgpExtNetworkAfEntry | not-accessible | current | An entry in bgp NetworkTable. |
| 1.3.6.1.4.1.2272.1.8.101.16.4.1.1 | ColumnrcIpBgpExtNetworkAfAddrType | not-accessible | current | Inet address type of the Network prefix that BGP will advertise. |
| 1.3.6.1.4.1.2272.1.8.101.16.4.1.2 | ColumnrcIpBgpExtNetworkAfAddr | not-accessible | current | v4/v6 Network prefix that BGP will advertise. |
| 1.3.6.1.4.1.2272.1.8.101.16.4.1.3 | ColumnrcIpBgpExtNetworkAfPrefixLen | not-accessible | current | Prefix length of the v4/v6 bgp network address |
| 1.3.6.1.4.1.2272.1.8.101.16.4.1.4 | ColumnrcIpBgpExtNetworkAfMetric | read-create | current | Value of the metric to be used while sending an update for the routes from the network table. Indicates to set the MED value for the routes advertised to ebgp … |
| 1.3.6.1.4.1.2272.1.8.101.16.4.1.5 | ColumnrcIpBgpExtNetworkAfRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.8.101.16.5 | ScalarrcIpBgpExtPeerAfTableSize | read-only | current | Size of Address family independent BGP Peer Table |
| 1.3.6.1.4.1.2272.1.8.101.16.6 | TablercIpBgpExtPeerAfTable | not-accessible | current | Extension to the BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP Peers, which is not supported by the s… |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1 | RowrcIpBgpExtPeerAfEntry | not-accessible | current | Entry containing miscelleneous information (info not present in the standard BGP peer table) about the connection with a remote BGP peer . |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.1 | ColumnrcIpBgpExtPeerAfGroupName | read-create | current | Peer group name to which this peer belongs (optional) |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.2 | ColumnrcIpBgpExtPeerAfDefaultOriginate | read-create | current | To allow a BGP speaker (the local router) to send the default route 0.0.0.0 to a neighbor for use as a default route |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.3 | ColumnrcIpBgpExtPeerAfDefaultOriginateIpv6 | read-create | current | To allow a BGP speaker (the local router) to Send the default ipv6 route to a neighbor for use as a default route |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.4 | ColumnrcIpBgpExtPeerAfEbgpMultiHop | read-create | current | To accept and attempt BGP connections to external peers residing on networks that are not directly connected |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.5 | ColumnrcIpBgpExtPeerAfAdvertisementInterval | read-create | current | To set the minimum interval between the sending Of BGP routing updates Time in seconds. Integer from 5 to 120. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.6 | ColumnrcIpBgpExtPeerAfPassword | read-create | current | To enable MD5 authentication on a TCP connection between two BGP Peers Case-sensitive password of up to 80 character |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.7 | ColumnrcIpBgpExtPeerAfWeight | read-create | current | To assign an absolute weight to a BGP network. It can be an integer from 0 to 65535. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.8 | ColumnrcIpBgpExtPeerAfMaxPrefix | read-create | current | Sets a limit on the number of routes that will be accepted from a neighbor. A value of zero indicates no limit |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.9 | ColumnrcIpBgpExtPeerAfNextHopSelf | read-create | current | Set NextHop Attribute to local router address Before sending updates to remote peer |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.10 | ColumnrcIpBgpExtPeerAfRoutePolicyIn | read-create | current | Route Policy Name that will be applied to all Networks learned from this peer |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.11 | ColumnrcIpBgpExtPeerAfRoutePolicyOut | read-create | current | Route policy name that will be applied to all outgoing updates |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.12 | ColumnrcIpBgpExtPeerAfRouteReflectorClient | read-create | current | Indicates whether this peer is a route reflector client. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.13 | ColumnrcIpBgpExtPeerAfSoftReconfigurationIn | read-create | current | If Peer soft reconfiguration is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp connection. … |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.14 | ColumnrcIpBgpExtPeerAfSoftReconfiguration | read-create | current | If rcIpBgpExtPeerAfSoftReconfigurationIn is enabled in the in-bound direction, policy can be changed and routes can re-learned without having to reset the bgp … |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.15 | ColumnrcIpBgpExtPeerAfRemovePrivateAs | read-create | current | Enable and disable private AS number from being stripped when sending an update |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.16 | ColumnrcIpBgpExtPeerAfMD5Authentication | read-create | current | Enable and Disable MD5 authentication |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.17 | ColumnrcIpBgpExtPeerAfDebugMask | read-create | current | value is one of multiple (logically by 'OR' of following value: none (0), error(1), packet(2), event(4), trace(8), warning(16), state(32), init(64), filter(128… |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.18 | ColumnrcIpBgpExtPeerAfSendCommunity | read-create | current | Enables or disables sending the update message community attribute to the specified peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.19 | ColumnrcIpBgpExtPeerAfUpdateSourceInterface | read-create | current | The Inet address to be used for Circuitless IP. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.20 | ColumnrcIpBgpExtPeerAfVpnv4Address | read-create | current | The vpnv4 routes specified. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.21 | ColumnrcIpBgpExtPeerAfIpv6Cap | read-create | current | The ipv6 capability can be enabled or disabled on the bgp neighbor peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.22 | ColumnrcIpBgpExtPeerAfIpvpnLiteCap | read-create | current | The IPVPN-lite capability can be enabled or disabled on the bgp neighbor peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.23 | ColumnrcIpBgpExtPeerAfSooAddress | read-create | current | The site-of-origin ip address. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.24 | ColumnrcIpBgpExtPeerAfSooAsNumber | read-create | current | The asnum for the site-of-origin for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.25 | ColumnrcIpBgpExtPeerAfSooAssignedNum | read-create | current | The Assigned number required along with asnum or address to configure the site-of-origin for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.26 | ColumnrcIpBgpExtPeerAfSooType | read-only | current | The soo type can be asnum or ipaddress. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.27 | ColumnrcIpBgpExtPeerAfRouteRefresh | read-create | current | Route refresh for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.28 | ColumnrcIpBgpExtPeerAfAsOverride | read-create | current | The AS Override value can be enabled or disabled for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.29 | ColumnrcIpBgpExtPeerAfAllowAsIn | read-create | current | The number of as-in allowed for bgp peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.30 | ColumnrcIpBgpExtPeerAfIpv6RoutePolicyIn | read-create | current | Ipv6 Route Policy Name that will be applied to all Networks learned from this peer |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.31 | ColumnrcIpBgpExtPeerAfIpv6RoutePolicyOut | read-create | current | Ipv6 Route policy name that will be applied to all outgoing updates |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.32 | ColumnrcIpBgpExtPeerAfEnable | read-create | current | Used to enable/disable bgp+ peer |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.33 | ColumnrcIpBgpExtPeerAfRemoteAs | read-create | current | Used to manually configure the remote as of the bgp+ peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.34 | ColumnrcIpBgpExtPeerAfConnectRetryInterval | read-create | current | Used to configure the ConnectRetry timer for the BGP+ peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.35 | ColumnrcIpBgpExtPeerAfHoldTimeConfigured | read-create | current | Used to configure the Hold Timer for the BGP+ peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.36 | ColumnrcIpBgpExtPeerAfKeepAliveConfigured | read-create | current | Used to configure the KeepAlive Timer for the BGP+ peer. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.37 | ColumnrcIpBgpExtPeerAfRowStatus | read-create | current | Used to create/delete entries in the Table. |
| 1.3.6.1.4.1.2272.1.8.101.16.6.1.38 | ColumnrcIpBgpExtPeerAfNewRemoteAs | read-create | current | Remote Autonomous system number of this peer |
| 1.3.6.1.4.1.2272.1.8.101.16.7 | TablercIpBgpExtAfPathAttrTable | not-accessible | current | Extension to rcIpBgpTmpAfPathAttrTable. This table contains info about additional BGP path attributes not covered in rcIpBgpTmpAfPathAttrTable. |
| 1.3.6.1.4.1.2272.1.8.101.16.7.1 | RowrcIpBgpExtAfPathAttrEntry | not-accessible | current | Each entry contains data about additional path attributes associated with a given prefix in the rcIpBgpTmpNlriTable. |
| 1.3.6.1.4.1.2272.1.8.101.16.7.1.1 | ColumnrcIpBgpExtAfPathAttrUnknown | read-only | current | Replaces bgp4PathAttrUnknown. One or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets… |
| 1.3.6.1.4.1.2272.1.8.101.16.7.1.2 | ColumnrcIpBgpExtAfPathAttrCommunities | read-only | current | The string represents BGP+ community path attributes as <length ,value>. The length is a 1-octet field containing the numbner of community numbers in the value… |
| 1.3.6.1.4.1.2272.1.8.101.16.7.1.3 | ColumnrcIpBgpExtAfPathAttrOriginateId | read-only | current | In a BGP+ context, the IP address of the router which originates the routes. |
| 1.3.6.1.4.1.2272.1.8.101.16.7.1.4 | ColumnrcIpBgpExtAfPathAttrClusterId | read-only | current | The string represents BGP+ Cluster Id path attributes as <length,value>. The length is a 1-octet field containing the number of Cluster Id numbers in the value… |
| 1.3.6.1.4.1.2272.1.8.101.17 | NodercIpBgpTmp | |||
| 1.3.6.1.4.1.2272.1.8.101.17.0 | NodercIpBgpTmpNotification | |||
| 1.3.6.1.4.1.2272.1.8.101.17.0.1 | NotificationrcIpBgpTmpEstablishedNotification | deprecated | The rcIpBgpTmpEstablishedNotification event is generated when the BGP FSM enters the established state. This Notification replaces the bgpEstablished Notificat… | |
| 1.3.6.1.4.1.2272.1.8.101.17.0.2 | NotificationrcIpBgpTmpBackwardTransNotification | deprecated | The rcIpBgpBackwardTransNotification event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. This Notification replac… | |
| 1.3.6.1.4.1.2272.1.8.101.17.0.3 | NotificationrcIpBgpTmpAfEstablishedNotification | current | The BGP Established event is generated when the BGP FSM enters the established state. | |
| 1.3.6.1.4.1.2272.1.8.101.17.0.4 | NotificationrcIpBgpTmpAfBackwardTransitionNotification | current | The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. Due to the nature of the BGP state … | |
| 1.3.6.1.4.1.2272.1.8.101.17.9 | ScalarrcIpBgpTmpLocalAsNew | read-only | current | The local autonomous system number. This object supports 4 byte ASes and replaces bgpLocalAs. |
| 1.3.6.1.4.1.2272.1.8.101.17.10 | NodercIpBgpTmpPeerAf | |||
| 1.3.6.1.4.1.2272.1.8.101.17.10.1 | TablercIpBgpTmpPeerAfTable | not-accessible | current | BGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers. This table replaces bgpPeerTable. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1 | RowrcIpBgpTmpPeerAfEntry | not-accessible | current | Entry containing information about the connection with a remote BGP peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.1 | ColumnrcIpBgpTmpPeerAfInstance | not-accessible | current | The routing instance index. Some BGP implementations permit the creation of multiple instances of a BGP routing process. An example includes routers running BG… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.2 | ColumnrcIpBgpTmpPeerAfLocalAddrType | not-accessible | current | The address family of the local end of the peering session. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.3 | ColumnrcIpBgpTmpPeerAfLocalAddr | not-accessible | current | The local IP address of this entry's BGP connection. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.4 | ColumnrcIpBgpTmpPeerAfRemoteAddrType | not-accessible | current | The address family of the remote end of the peering session. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.5 | ColumnrcIpBgpTmpPeerAfRemoteAddr | not-accessible | current | The remote IP address of this entry's BGP peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.6 | ColumnrcIpBgpTmpPeerAfLocalPort | read-only | current | The local port for the TCP connection between the BGP peers. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.7 | ColumnrcIpBgpTmpPeerAfLocalAs | read-only | current | Some implementations of BGP can represent themselves as multiple ASes. This is the AS that this peering session is representing itself as to the remote peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.8 | ColumnrcIpBgpTmpPeerAfRemotePort | read-only | current | The remote port for the TCP connection between the BGP peers. Note that the objects rcIpBgpTmpPeerAfLocalAddr, rcIpBgpTmpPeerAfLocalPort, rcIpBgpTmpPeerAfRemot… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.9 | ColumnrcIpBgpTmpPeerAfRemoteAs | read-only | current | The remote autonomous system number received in the BGP OPEN message. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.10 | ColumnrcIpBgpTmpPeerAfIdentifier | read-only | current | The BGP Identifier of this entry's remote BGP peer. This entry should be 0.0.0.0 unless the rcIpBgpTmpPeerAfPeerState is in the openconfirm or the established … |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.11 | ColumnrcIpBgpTmpPeerAfAdminStatus | read-only | current | Whether or not the BGP FSM for this remote peer is halted or running. The BGP FSM for a remote peer is halted after processing a Stop event. Likewise, it is in… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.12 | ColumnrcIpBgpTmpPeerAfPeerState | read-only | current | The BGP peer connection state. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.13 | ColumnrcIpBgpTmpPeerAfConfiguredVersion | read-only | current | The configured version to originally start with this remote peer. The BGP speaker may permit negotiation to a lower version number of the protocol. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.1.1.14 | ColumnrcIpBgpTmpPeerAfNegotiatedVersion | read-only | current | The negotiated version of BGP running between the two peers. This entry MUST be zero (0) unless the rcIpBgpTmpPeerAfState is in the openconfirm or the establis… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2 | NodercIpBgpTmpPeerAfErrors | |||
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1 | TablercIpBgpTmpPeerAfErrorsTable | not-accessible | current | On a per-peer basis, this table reflects the last protocol-defined error encountered and reported on the peer session. If no entry for a given peer exists in t… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1 | RowrcIpBgpTmpPeerAfErrorsEntry | not-accessible | current | Each entry contains information about errors sent and received for a particular BGP peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.1 | ColumnrcIpBgpTmpPeerAfLastErrorCodeReceived | read-only | current | The last error code received from this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.2 | ColumnrcIpBgpTmpPeerAfLastErrorSubCodeReceived | read-only | current | The last subcode received from this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.3 | ColumnrcIpBgpTmpPeerAfLastErrorReceivedTime | read-only | current | The timestamp that the last NOTIFICATION was received from this peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.4 | ColumnrcIpBgpTmpPeerAfLastErrorReceivedText | read-only | current | This object contains an implementation specific explanation of the error that was reported. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.5 | ColumnrcIpBgpTmpPeerAfLastErrorReceivedData | read-only | current | The last error code's data seen by this peer. Per RFC 2578, some implementations may have limitations dealing with OCTET STRINGS larger than 255. Thus, this da… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.6 | ColumnrcIpBgpTmpPeerAfLastErrorCodeSent | read-only | current | The last error code sent to this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.7 | ColumnrcIpBgpTmpPeerAfLastErrorSubCodeSent | read-only | current | The last subcode sent to this peer via NOTIFICATION message on this connection. If no error has occurred, this field is zero. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.8 | ColumnrcIpBgpTmpPeerAfLastErrorSentTime | read-only | current | The timestamp that the last NOTIFICATION was sent to this peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.9 | ColumnrcIpBgpTmpPeerAfLastErrorSentText | read-only | current | This object contains an implementation specific explanation of the error that is being reported. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.2.1.1.10 | ColumnrcIpBgpTmpPeerAfLastErrorSentData | read-only | current | The last error code's data sent to this peer. Per RFC 2578, some implementations may have limitations dealing with OCTET STRINGS larger than 255. Thus, this da… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3 | NodercIpBgpTmpPeerAfTimers | |||
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.1 | TablercIpBgpTmpPeerAfEventTimesTable | not-accessible | current | A table reporting the per-peering session amount of time elapsed and update events since the peering session advanced into the established state. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1 | RowrcIpBgpTmpPeerAfEventTimesEntry | not-accessible | current | Each row contains a set of statistics about time spent and events encountered in the peer session established state. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1.1 | ColumnrcIpBgpTmpPeerAfFsmEstablishedTime | read-only | current | This timer indicates how long (in seconds) this peer has been in the established state or how long since this peer was last in the established state. It is set… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.1.1.2 | ColumnrcIpBgpTmpPeerAfInUpdatesElapsedTime | read-only | current | Elapsed time (in seconds) since the last BGP UPDATE message was received from the peer. Each time bgpPeerInUpdates is incremented, the value of this object is … |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2 | TablercIpBgpTmpPeerAfConfiguredTimersTable | not-accessible | current | Per peer management data on BGP session timers. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1 | RowrcIpBgpTmpPeerAfConfiguredTimersEntry | not-accessible | current | Each entry corresponds to the current state of BGP timers on a given peering session. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.1 | ColumnrcIpBgpTmpPeerAfConnectRetryInterval | read-only | current | Time interval (in seconds) for the ConnectRetry timer. The suggested value for this timer is 120 seconds. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.2 | ColumnrcIpBgpTmpPeerAfHoldTimeConfigured | read-only | current | Time interval (in seconds) for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker, using the smaller of the v… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.3 | ColumnrcIpBgpTmpPeerAfKeepAliveConfigured | read-only | current | Time interval (in seconds) for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE m… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.4 | ColumnrcIpBgpTmpPeerAfMinASOrigInterval | read-only | current | Time interval (in seconds) for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.2.1.5 | ColumnrcIpBgpTmpPeerAfMinRouteAdverInterval | read-only | current | Time interval (in seconds) for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds for EBGP connections and 5 seconds for… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.3 | TablercIpBgpTmpPeerAfNegotiatedTimersTable | not-accessible | current | Configured values of per-peer timers are seen in the rcIpBgpTmpPeerAfConfiguredTimersTable. Values in this table reflect the current operational values, after … |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1 | RowrcIpBgpTmpPeerAfNegotiatedTimersEntry | not-accessible | current | Each entry reflects a value of the currently operational, negotiated timer as reflected in the rcIpBgpTmpPeerAfNegotiatedTimersEntry. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1.1 | ColumnrcIpBgpTmpPeerAfHoldTime | read-only | current | The value of this object is calculated by this BGP Speaker as being; zero (0) - if this was the value sent by the peer and this value is permitted by this BGP … |
| 1.3.6.1.4.1.2272.1.8.101.17.10.3.3.1.2 | ColumnrcIpBgpTmpPeerAfKeepAlive | read-only | current | Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared… |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4 | NodercIpBgpTmpPeerAfCounters | |||
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1 | TablercIpBgpTmpPeerAfCountersTable | not-accessible | current | The counters associated with a BGP Peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1 | RowrcIpBgpTmpPeerAfCountersEntry | not-accessible | current | Each entry contains counters of message transmissions and FSM transitions for a given BGP Peering session. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.1 | ColumnrcIpBgpTmpPeerAfInUpdates | read-only | current | The number of BGP UPDATE messages received on this connection. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.2 | ColumnrcIpBgpTmpPeerAfOutUpdates | read-only | current | The number of BGP UPDATE messages transmitted on this connection. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.3 | ColumnrcIpBgpTmpPeerAfInTotalMessages | read-only | current | The total number of messages received from the remote peer on this connection. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.4 | ColumnrcIpBgpTmpPeerAfOutTotalMessages | read-only | current | The total number of messages transmitted to the remote peer on this connection. |
| 1.3.6.1.4.1.2272.1.8.101.17.10.4.1.1.5 | ColumnrcIpBgpTmpPeerAfFsmEstablishedTransitions | read-only | current | The total number of times the BGP FSM transitioned into the established state for this peer. |
| 1.3.6.1.4.1.2272.1.8.101.17.11 | NodercIpBgpTmpRib | |||
| 1.3.6.1.4.1.2272.1.8.101.17.11.1 | TablercIpBgpTmpNlriTable | not-accessible | current | The BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers. Collectively, this represents th… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1 | RowrcIpBgpTmpNlriEntry | not-accessible | current | Information about a path to a network. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.1 | ColumnrcIpBgpTmpNlriIndex | not-accessible | current | This index allows for multiple instances of a base prefix for a certain AFI-SAFI from a given peer. This is currently useful for two things: 1. Allowing for a … |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.2 | ColumnrcIpBgpTmpNlriAfi | not-accessible | current | The address family of the prefix for this NLRI. Note that the AFI is not necessarily equivalent to the an InetAddressType. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.3 | ColumnrcIpBgpTmpNlriSafi | not-accessible | current | The subsequent address family of the prefix for this NLRI |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.4 | ColumnrcIpBgpTmpNlriPrefixType | read-only | current | The type of the IP address prefix in the Network Layer Reachability Information field. The value of this object is derived from the appropriate value from the … |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.5 | ColumnrcIpBgpTmpNlriPrefix | not-accessible | current | An IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by rcIpBgpTm… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.6 | ColumnrcIpBgpTmpNlriPrefixLen | not-accessible | current | Length in bits of the address prefix in the Network Layer Reachability Information field. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.7 | ColumnrcIpBgpTmpNlriBest | read-only | current | An indication of whether or not this route was chosen as the best BGP4 route for this destination. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.8 | ColumnrcIpBgpTmpNlriCalcLocalPref | read-only | current | The degree of preference calculated by the receiving BGP4 speaker for an advertised route. In the case where this prefix is ineligible, this object will be abs… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.9 | ColumnrcIpBgpTmpAfPathAttrIndex | read-only | current | This value is a unique index for entries in the rcIpBgpTmpAfPathAttrTable. It is assigned by the agent at the point of creation of the rcIpBgpTmpAfPathAttrTabl… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.1.1.10 | ColumnrcIpBgpTmpAfPathAttrUnknownIndex | read-only | current | This value is a unique index for entries in the rcIpBgpTmpAfPathAttrUnknownTable. It is assigned by the agent at the point of creation of the rcIpBgpTmpAfPathA… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.3 | ScalarrcIpBgpTmpAfPathAttrCounter | read-only | current | The number of entries in the rcIpBgpTmpAfPathAttrTable. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4 | TablercIpBgpTmpAfPathAttrTable | not-accessible | current | Provides per advertised network-prefix attribute data, as advertised over a peering session. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1 | RowrcIpBgpTmpAfPathAttrEntry | not-accessible | current | Each entry contains data about path attributes associated with a given prefix in the rcIpBgpTmpNlriTable. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.1 | ColumnrcIpBgpTmpAfPathAttrOrigin | read-only | current | The ultimate origin of the path information. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.2 | ColumnrcIpBgpTmpAfPathAttrNextHopAddrType | read-only | current | The address family of the address for the border router that should be used to access the destination network. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.3 | ColumnrcIpBgpTmpAfPathAttrNextHopAddr | read-only | current | The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet assoc… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.4 | ColumnrcIpBgpTmpAfPathAttrLinkLocalNextHopAddrType | read-only | current | The address type for IPv6 link local addresses. This is present only when receiving RFC 2545 style double nexthops. This object is optionally present in BGP im… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.5 | ColumnrcIpBgpTmpAfPathAttrLinkLocalNextHopAddr | read-only | current | This value contains an IPv6 link local address and is present only when receiving RFC 2545 style double nexthops. This object is optionally present in BGP impl… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.6 | ColumnrcIpBgpTmpAfPathAttrMedPresent | read-only | current | This value is true when the MED value was sent in the UPDATE message. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.7 | ColumnrcIpBgpTmpAfPathAttrMed | read-only | current | This metric is used to discriminate between multiple exit points to an adjacent autonomous system. When the MED value is absent but has a calculated default va… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.8 | ColumnrcIpBgpTmpAfPathAttrLocalPref | read-only | current | The originating BGP4 speakers degree of preference for an advertised route. If the route was not sent with a LOCAL_PREF value, this object will be absent. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.9 | ColumnrcIpBgpTmpAfPathAttrAtomicAggregate | read-only | current | When this object is set to atomicAggregatePresent, the ATOMIC_AGGREGATE Path Attribute is present and indicates that the NLRI MUST NOT be made more specific. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.10 | ColumnrcIpBgpTmpAfPathAttrAggregatorAS | read-only | current | The AS number of the last BGP4 speaker that performed route aggregation. If the AGGREGATOR path attribute is absent, this object will not be present in the con… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.11 | ColumnrcIpBgpTmpAfPathAttrAggregatorAddr | read-only | current | The IP address of the last BGP4 speaker that performed route aggregation. If the AGGREGATOR path attribute is absent, this object will not be present in the co… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.12 | ColumnrcIpBgpTmpAsPathCalcLength | read-only | current | This value represents the calculated length of the AS Path according to the rules of the BGP specification. This value is used in route selection. |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.13 | ColumnrcIpBgpTmpAsPathIndex | read-only | current | This value is a unique index for the decomposed AS Path in the rcIpBgpTmpAsPathTable. It is assigned by the agent at the point of creation of the rcIpBgpTmpAsP… |
| 1.3.6.1.4.1.2272.1.8.101.17.11.4.1.14 | ColumnrcIpBgpTmpAsPathString | read-only | current | This is a string depicting the autonomous system path to this network which was received from the peer which advertised it. The format of the string is impleme… |
| 1.3.6.1.4.1.2272.1.8.101.17.12 | NodercIpBgpTmpExtensions | |||
| 1.3.6.1.4.1.2272.1.8.103 | NodercIpInterVrfStaticRoute | |||
| 1.3.6.1.4.1.2272.1.8.103.1 | ScalarrcIpInterVrfStaticRouteTableSize | read-only | current | size of Ip Static Route Table. |
| 1.3.6.1.4.1.2272.1.8.103.2 | TablercIpInterVrfStaticRouteTable | not-accessible | current | This table is used to add static IP routes to the device. Routes added into this table will automatically show-up in the 'rcIpRouteTable' when the device is ac… |
| 1.3.6.1.4.1.2272.1.8.103.2.1 | RowrcIpInterVrfStaticRouteEntry | not-accessible | current | A static route to a particular destination. |
| 1.3.6.1.4.1.2272.1.8.103.2.1.1 | ColumnrcIpInterVrfStaticRouteOwnerVrfId | not-accessible | current | Owner VRF id of the static route |
| 1.3.6.1.4.1.2272.1.8.103.2.1.2 | ColumnrcIpInterVrfStaticRouteDest | not-accessible | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.3 | ColumnrcIpInterVrfStaticRouteMask | not-accessible | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpRouteDest field. For those systems that do not… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.4 | ColumnrcIpInterVrfStaticRouteNextHop | not-accessible | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.5 | ColumnrcIpInterVrfStaticRouteMetric | read-write | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rcIpRouteProto value. I… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.6 | ColumnrcIpInterVrfStaticRouteIfIndex | read-only | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.7 | ColumnrcIpInterVrfStaticRoutePreference | read-write | current | Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest pref… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.8 | ColumnrcIpInterVrfStaticRouteEnable | read-write | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.8.103.2.1.9 | ColumnrcIpInterVrfStaticRouteStatus | read-only | current | Used to indicate the current status of this entry. |
| 1.3.6.1.4.1.2272.1.8.103.2.1.10 | ColumnrcIpInterVrfStaticRouteRowStatus | read-write | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.8.103.2.1.11 | ColumnrcIpInterVrfStaticRouteLocalNextHop | read-write | current | Used to enable/disable this entry. True indicate that the static route becomes active only if switch has a local route to the network. False indicates that the… |
| 1.3.6.1.4.1.2272.1.8.103.2.1.12 | ColumnrcIpInterVrfStaticRouteNextHopVrfId | read-write | current | Used to indicate nhVrfId in inter-VRF static-route configuration |
| 1.3.6.1.4.1.2272.1.8.109 | NodercIpMulticastSquareSmlt | |||
| 1.3.6.1.4.1.2272.1.8.109.1 | ScalarrcIpMulticastSquareSmltEnable | read-write | current | Enable/Disable multicast Square Smlt. |
| 1.3.6.1.4.1.2272.1.9 | NodercArp | |||
| 1.3.6.1.4.1.2272.1.9.1 | ScalarrcArpExtLifeTime | read-write | current | The lifetime in minutues of an ARP entry within the system. |
| 1.3.6.1.4.1.2272.1.9.2 | TablercArpExtTable | not-accessible | current | ARP extension table. This table augments the standard ipNetToMediaTable defined in RFC1213. |
| 1.3.6.1.4.1.2272.1.9.2.1 | RowrcArpExtEntry | not-accessible | current | Entry containing Proprietary ARP information. An entry is automatically created in this table when an ip address is configured on an interface. |
| 1.3.6.1.4.1.2272.1.9.2.1.1 | ColumnrcArpExtEntIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.9.2.1.2 | ColumnrcArpExtEntDoProxy | read-write | current | Enable or disable ARP proxy responses on the specified interface. |
| 1.3.6.1.4.1.2272.1.9.2.1.3 | ColumnrcArpExtEntDoResp | read-write | current | Enable or disable the sending of ARP responses on the specified interface. |
| 1.3.6.1.4.1.2272.1.9.2.1.4 | ColumnrcArpExtEntDoFlood | read-write | current | Enable or disable flooding of ARP responses for NLBS Virtual Mac on the specified interface. |
| 1.3.6.1.4.1.2272.1.10 | NodercRip | |||
| 1.3.6.1.4.1.2272.1.10.1 | ScalarrcRipExtOperation | read-write | current | Enable or disable the operation of RIP on all Interfaces. |
| 1.3.6.1.4.1.2272.1.10.2 | ScalarrcRipExtUpdateTime | read-write | current | The time between transmission of RIP updates on all interfaces. |
| 1.3.6.1.4.1.2272.1.10.3 | TablercRipExtTable | not-accessible | current | RIP extension table. This table augments the standard IfConfTable table in RFC1389. |
| 1.3.6.1.4.1.2272.1.10.3.1 | RowrcRipExtEntry | not-accessible | current | Entry containing Proprietary RIP information. An entry is automatically created in this table when an ip address is configured on an interface. |
| 1.3.6.1.4.1.2272.1.10.3.1.1 | ColumnrcRipExtEntIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.10.3.1.2 | ColumnrcRipExtEntTalk | read-write | current | Enable or disable RIP transmission on the specified interface. |
| 1.3.6.1.4.1.2272.1.10.3.1.3 | ColumnrcRipExtEntListen | read-write | current | Enable or disable RIP reception on the specified interface. |
| 1.3.6.1.4.1.2272.1.10.3.1.4 | ColumnrcRipExtEntPoison | read-write | current | Enable or disable operation of poison reverse on the specified interface. If poison is disabled, split-horizon operation is enabled. |
| 1.3.6.1.4.1.2272.1.11 | NodercTest | |||
| 1.3.6.1.4.1.2272.1.11.1 | TablercTestExtTable | not-accessible | current | Test extension table. This table augments the standard ifTestTable table in RFC1573. |
| 1.3.6.1.4.1.2272.1.11.1.1 | RowrcTestEntry | not-accessible | current | Proprietary test variables. |
| 1.3.6.1.4.1.2272.1.11.1.1.1 | ColumnrcTestExtIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.11.1.1.2 | ColumnrcTestExtPassCount | read-only | current | The number of iterations of the test case that completed successfully. |
| 1.3.6.1.4.1.2272.1.11.1.1.3 | ColumnrcTestExtFailCount | read-only | current | The number of iterations of the test case that failed. |
| 1.3.6.1.4.1.2272.1.11.2 | NodercTestTypes | |||
| 1.3.6.1.4.1.2272.1.11.2.1 | NodercTestTypesFabric | |||
| 1.3.6.1.4.1.2272.1.11.2.2 | NodercTestTypesArTable | |||
| 1.3.6.1.4.1.2272.1.11.2.3 | NodercTestTypesExtLoopBack | |||
| 1.3.6.1.4.1.2272.1.11.3 | NodercTestCodes | |||
| 1.3.6.1.4.1.2272.1.11.3.1 | NodercTestCodesNoReceive | |||
| 1.3.6.1.4.1.2272.1.11.3.2 | NodercTestCodesBadSeq | |||
| 1.3.6.1.4.1.2272.1.11.3.3 | NodercTestCodesBadLen | |||
| 1.3.6.1.4.1.2272.1.11.3.4 | NodercTestCodesBadData | |||
| 1.3.6.1.4.1.2272.1.12 | NodercStat | |||
| 1.3.6.1.4.1.2272.1.12.1 | TablercStatTable | not-accessible | current | A table used to store port statistics. |
| 1.3.6.1.4.1.2272.1.12.1.1 | RowrcStatEntry | not-accessible | current | interface counters |
| 1.3.6.1.4.1.2272.1.12.1.1.1 | ColumnrcStatPortIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.12.1.1.2 | ColumnrcStatFrameTooShorts | read-only | current | The total number of frames that are too short that were encountered on this interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.3 | ColumnrcStatBridgeInUnicastFrames | read-only | current | The total number of incoming unicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.4 | ColumnrcStatBridgeInMulticastFrames | read-only | current | The total number of incoming multicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.5 | ColumnrcStatBridgeInBroadcastFrames | read-only | current | The total number of incoming broadcast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.6 | ColumnrcStatBridgeInDiscards | read-only | current | The total number of frames that were discarded by the bridging entity. |
| 1.3.6.1.4.1.2272.1.12.1.1.7 | ColumnrcStatBridgeOutUnicastFrames | read-only | current | The total number of outgoing unicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.8 | ColumnrcStatBridgeOutMulticastFrames | read-only | current | The total number of outgoing multicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.9 | ColumnrcStatBridgeOutBroadcastFrames | read-only | current | The total number of outgoing broadcast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.10 | ColumnrcStatRouteInUnicastFrames | read-only | current | The total number of incoming unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.12.1.1.11 | ColumnrcStatRouteInMulticastFrames | read-only | current | The total number of incoming multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.12.1.1.12 | ColumnrcStatRouteInDiscards | read-only | current | The total number of frames that were discarded by the routing entity. |
| 1.3.6.1.4.1.2272.1.12.1.1.13 | ColumnrcStatRouteOutUnicastFrames | read-only | current | The total number of outgoing unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.12.1.1.14 | ColumnrcStatRouteOutMulticastFrames | read-only | current | The total number of outgoing multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.12.1.1.15 | ColumnrcStatStgForwardTransitions | read-only | current | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.2272.1.12.1.1.16 | ColumnrcStatStgInConfigBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.12.1.1.17 | ColumnrcStatStgInTcnBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.12.1.1.18 | ColumnrcStatStgInBadBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.12.1.1.19 | ColumnrcStatStgOutConfigBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.12.1.1.20 | ColumnrcStatStgOutTcnBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.12.1.1.21 | ColumnrcStatBridgeOutFrames | read-only | current | Used by the Accelar 8000 product family to account for all transmitted bridge unicast, broadcast, and multicast packets. The individual counters are not suppor… |
| 1.3.6.1.4.1.2272.1.12.1.1.25 | ColumnrcStatPolicerTotalBytes | read-only | current | The total number of bytes received on the interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.26 | ColumnrcStatPolicerTotalPkts | read-only | current | The total number of packets received on the interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.27 | ColumnrcStatPolicerGreenBytes | read-only | current | The total number of bytes received on the interface that were below the committed rate. |
| 1.3.6.1.4.1.2272.1.12.1.1.28 | ColumnrcStatPolicerYellowBytes | read-only | current | The total number of bytes received on the interface that were above the committed rate but below the peak rate. |
| 1.3.6.1.4.1.2272.1.12.1.1.29 | ColumnrcStatPolicerRedBytes | read-only | current | The total number of bytes received on the interface that were above the peak rate. |
| 1.3.6.1.4.1.2272.1.12.2 | TablercStatGigTable | not-accessible | current | A table used to store Gigport error statistics. |
| 1.3.6.1.4.1.2272.1.12.2.1 | RowrcStatGigEntry | not-accessible | current | Gigabit interface error counters |
| 1.3.6.1.4.1.2272.1.12.2.1.1 | ColumnrcStatGigPortIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.12.2.1.2 | ColumnrcStatGigLinkFailures | read-only | current | The total number of link failures encountered on this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.3 | ColumnrcStatGigPacketErrors | read-only | current | The total number of packet errors encountered on this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.4 | ColumnrcStatGigCarrierErrors | read-only | current | The total number of carrier errors encountered on this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.5 | ColumnrcStatGigLinkInactiveErrors | read-only | current | The total number of link inactive errors encountered on this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.6 | ColumnrcStatGigInFlowCtrlPkts | read-only | deprecated | The total number of flow control packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.7 | ColumnrcStatGigOutFlowCtrlPkts | read-only | deprecated | The total number of flow control packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.8 | ColumnrcStatGigHCInPfcPkts | read-only | current | The total number of Priority Flow Control (PFC) packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.9 | ColumnrcStatGigHCOutPfcPkts | read-only | current | The total number of Priority Flow Control (PFC) packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.10 | ColumnrcStatGigHCInFlowCtrlPkts | read-only | current | The total number of flow control packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.2.1.11 | ColumnrcStatGigHCOutFlowCtrlPkts | read-only | current | The total number of flow control packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.3 | NodercStatOspf | |||
| 1.3.6.1.4.1.2272.1.12.3.1 | ScalarrcStatOspfBuffersAllocated | read-only | current | Used to indicate the number of buffers allocated for OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.2 | ScalarrcStatOspfBuffersFreed | read-only | current | Used to indicate the number of buffers that are freed by the OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.3 | ScalarrcStatOspfBufferAllocFailures | read-only | current | Used to indicate the number of times that OSPF has failed to allocate buffers. |
| 1.3.6.1.4.1.2272.1.12.3.4 | ScalarrcStatOspfBufferFreeFailures | read-only | current | Used to indicate the number of times that OSPF has failed to free buffers. |
| 1.3.6.1.4.1.2272.1.12.3.5 | ScalarrcStatOspfTxPackets | read-only | current | Used to indicate the number of packets transmitted by OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.6 | ScalarrcStatOspfRxPackets | read-only | current | Used to indicate the number of packets received by OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.7 | ScalarrcStatOspfTxDropPackets | read-only | current | Used to indicate the number of packets dropped before transmitted by OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.8 | ScalarrcStatOspfRxDropPackets | read-only | current | Used to indicate the number of packets dropped before received by OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.9 | ScalarrcStatOspfRxBadPackets | read-only | current | Used to indicate the number of packets received by OSPF that are bad. |
| 1.3.6.1.4.1.2272.1.12.3.10 | ScalarrcStatOspfSpfRuns | read-only | current | Used to indicate the total number of SPF calculatations performed by OSPF, which also includes the number of partial route table calculation for Incremental Up… |
| 1.3.6.1.4.1.2272.1.12.3.11 | ScalarrcStatOspfLastSpfRun | read-only | current | Used to indicate the time(SysUpTime) since the last spf calculated by OSPF. |
| 1.3.6.1.4.1.2272.1.12.3.12 | ScalarrcStatOspfLsdbTblSize | read-only | current | Used to indicate the number of entries in the linkstate database table. |
| 1.3.6.1.4.1.2272.1.12.3.13 | ScalarrcStatOspfRoutes | read-only | current | Used to indicate the number of OSPF routes added to RTM. |
| 1.3.6.1.4.1.2272.1.12.3.14 | ScalarrcStatOspfAdjacencies | read-only | current | Used to indicate the number of adjacencies existing. |
| 1.3.6.1.4.1.2272.1.12.3.15 | ScalarrcStatOspfAreas | read-only | current | Used to indicate the number of areas configured |
| 1.3.6.1.4.1.2272.1.12.4 | NodercStatIgmp | |||
| 1.3.6.1.4.1.2272.1.12.4.1 | ScalarrcStatIgmpInMsgs | read-only | current | Used to indicate the number of Igmp packets received by the device. |
| 1.3.6.1.4.1.2272.1.12.4.2 | ScalarrcStatIgmpInErrors | read-only | current | Used to indicate the number of Igmp packets received that are with checksum errors. |
| 1.3.6.1.4.1.2272.1.12.4.3 | ScalarrcStatIgmpInQueries | read-only | current | Used to indicate the number of Igmp queries received by the device. |
| 1.3.6.1.4.1.2272.1.12.4.4 | ScalarrcStatIgmpInReports | read-only | current | Used to indicate the number of Igmp reports received by the device. |
| 1.3.6.1.4.1.2272.1.12.4.5 | ScalarrcStatIgmpInLeaves | read-only | current | Used to indicate the number of Igmp Leaves received by the device. |
| 1.3.6.1.4.1.2272.1.12.4.6 | ScalarrcStatIgmpInvalid | read-only | current | Used to indicate the number of Igmp packets received by the device that contained invalid type. |
| 1.3.6.1.4.1.2272.1.12.4.7 | ScalarrcStatIgmpOutMsgs | read-only | current | Used to indicate the number of Igmp queries sent by the device. |
| 1.3.6.1.4.1.2272.1.12.5 | TablercStatOspfIfTable | not-accessible | current | A table used to store OSPF interface statistics. |
| 1.3.6.1.4.1.2272.1.12.5.1 | RowrcStatOspfIfEntry | not-accessible | current | Ospf interface statistics |
| 1.3.6.1.4.1.2272.1.12.5.1.1 | ColumnrcStatOspfIfIndex | read-only | current | An unique value that is used to identify a physical interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.2 | ColumnrcStatOspfIfRxHellos | read-only | current | Used to indicate the number hello packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.3 | ColumnrcStatOspfIfRxDBDescrs | read-only | current | Used to indicate the number database descriptor packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.4 | ColumnrcStatOspfIfRxLSUpdates | read-only | current | Used to indicate the number Link state update packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.5 | ColumnrcStatOspfIfRxLSReqs | read-only | current | Used to indicate the number Link state request packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.6 | ColumnrcStatOspfIfRxLSAcks | read-only | current | Used to indicate the number Link state acknowlege packets received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.7 | ColumnrcStatOspfIfTxHellos | read-only | current | Used to indicate the number hello packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.8 | ColumnrcStatOspfIfTxDBDescrs | read-only | current | Used to indicate the number database descriptor packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.9 | ColumnrcStatOspfIfTxLSUpdates | read-only | current | Used to indicate the number Link state update packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.10 | ColumnrcStatOspfIfTxLSReqs | read-only | current | Used to indicate the number Link state request packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.11 | ColumnrcStatOspfIfTxLSAcks | read-only | current | Used to indicate the number Link state acknowlege packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.12 | ColumnrcStatOspfIfVersionMismatches | read-only | current | Used to indicate the number version mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.13 | ColumnrcStatOspfIfAreaMismatches | read-only | current | Used to indicate the number area mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.14 | ColumnrcStatOspfIfAuthTypeMismatches | read-only | current | Used to indicate the number AuthType mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.15 | ColumnrcStatOspfIfAuthFailures | read-only | current | Used to indicate the number Authentication failures. |
| 1.3.6.1.4.1.2272.1.12.5.1.16 | ColumnrcStatOspfIfNetMaskMismatches | read-only | current | Used to indicate the number net mask mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.17 | ColumnrcStatOspfIfHelloIntervalMismatches | read-only | current | Used to indicate the number hello interval mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.18 | ColumnrcStatOspfIfDeadIntervalMismatches | read-only | current | Used to indicate the number dead interval mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.5.1.19 | ColumnrcStatOspfIfOptionMismatches | read-only | current | Used to indicate the number options mismatches received by this interface. |
| 1.3.6.1.4.1.2272.1.12.6 | NodercStatMlt | |||
| 1.3.6.1.4.1.2272.1.12.6.1 | TablercStatMltIfExtnTable | not-accessible | current | A table used to store Mlt interface statistics. |
| 1.3.6.1.4.1.2272.1.12.6.1.1 | RowrcStatMltIfExtnEntry | not-accessible | current | Mlt interface statistics |
| 1.3.6.1.4.1.2272.1.12.6.1.1.1 | ColumnrcStatMltIfExtnMltId | read-only | current | Mlt Id |
| 1.3.6.1.4.1.2272.1.12.6.1.1.2 | ColumnrcStatMltIfExtnIfInMulticastPkts | read-only | current | multi-pkts to upper |
| 1.3.6.1.4.1.2272.1.12.6.1.1.3 | ColumnrcStatMltIfExtnIfInBroadcastPkts | read-only | current | broad-pkts to upper |
| 1.3.6.1.4.1.2272.1.12.6.1.1.4 | ColumnrcStatMltIfExtnIfOutMulticastPkts | read-only | current | multi-pkts from upper |
| 1.3.6.1.4.1.2272.1.12.6.1.1.5 | ColumnrcStatMltIfExtnIfOutBroadcastPkts | read-only | current | broad-pkts from upper |
| 1.3.6.1.4.1.2272.1.12.6.1.1.6 | ColumnrcStatMltIfExtnIfHCInOctets | read-only | current | The total number of octets received on the MLT interface, including framing characters. |
| 1.3.6.1.4.1.2272.1.12.6.1.1.7 | ColumnrcStatMltIfExtnIfHCInUcastPkts | read-only | current | The number of packets delivered by this MLT to a higher MLT that were not addressed to a nulticast or broadcase address at this sublayer. |
| 1.3.6.1.4.1.2272.1.12.6.1.1.8 | ColumnrcStatMltIfExtnIfHCInMulticastPkt | read-only | current | The number of packets delivered to this MLT that were addressed to a nulticast address at this sublayer. For a MAC layer protocol, this number includes both Gr… |
| 1.3.6.1.4.1.2272.1.12.6.1.1.9 | ColumnrcStatMltIfExtnIfHCInBroadcastPkt | read-only | current | The number of packets delivered to this MLT that were addressed to a broadcast address at this sublayer. |
| 1.3.6.1.4.1.2272.1.12.6.1.1.10 | ColumnrcStatMltIfExtnIfHCOutOctets | read-only | current | The total number of octets transmitted out of the MLT interface, including framing characters. |
| 1.3.6.1.4.1.2272.1.12.6.1.1.11 | ColumnrcStatMltIfExtnIfHCOutUcastPkts | read-only | current | The number of packets that hight-level protocols requested be transmitted that were not addressed to a multicast address at this MLT. This total number include… |
| 1.3.6.1.4.1.2272.1.12.6.1.1.12 | ColumnrcStatMltIfExtnIfHCOutMulticast | read-only | current | The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a multicast address at this MLT, including those th… |
| 1.3.6.1.4.1.2272.1.12.6.1.1.13 | ColumnrcStatMltIfExtnIfHCOutBroadcast | read-only | current | The total number of packets that hight-level protocols requested be transmitted, and that were addressed to a broadcase address at this MLT, including those th… |
| 1.3.6.1.4.1.2272.1.12.6.1.1.14 | ColumnrcStatMltIfExtnIfHCInLsmPkts | read-only | current | The total number of Link State Messaging (LSM) packets delivered to this MLT. |
| 1.3.6.1.4.1.2272.1.12.6.1.1.15 | ColumnrcStatMltIfExtnIfHCOutLsmPkts | read-only | current | The total number of Link State Messaging (LSM) packets trasmitted on this MLT. |
| 1.3.6.1.4.1.2272.1.12.6.2 | TablercStatMltEtherTable | not-accessible | current | A table used to store Mlt Ethernet statistics. |
| 1.3.6.1.4.1.2272.1.12.6.2.1 | RowrcStatMltEtherEntry | not-accessible | current | Mlt enternet statistics |
| 1.3.6.1.4.1.2272.1.12.6.2.1.1 | ColumnrcStatMltEtherMltId | read-only | current | A value that uniquely identifies the Multi-Link Trunk associated with this entry. |
| 1.3.6.1.4.1.2272.1.12.6.2.1.2 | ColumnrcStatMltEtherAlignmentErrors | read-only | current | A count of frames received on a particular MLT that are not an integral number of octets in length and do not pass the FCS check. The count represented by an i… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.3 | ColumnrcStatMltEtherFCSErrors | read-only | current | A count of frames received on an MLT that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of thi… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.4 | ColumnrcStatMltEtherSingleCollFrames | read-only | current | A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by exactly one collision. A frame that is counted by an inst… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.5 | ColumnrcStatMltEtherMultipleCollFrames | read-only | current | A count of successfully transmitted frames on a particular MLT for which transmission is inhibited by more than one collision. A frame that is counted by an in… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.6 | ColumnrcStatMltEtherSQETestError | read-only | current | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular MLT. SQE stands for Signal Quality Error. |
| 1.3.6.1.4.1.2272.1.12.6.2.1.7 | ColumnrcStatMltEtherDeferredTransmiss | read-only | current | A count of frames for which the first transmission attempt on a particular MLT is delayed because the medium is busy. The count represented by an instance of t… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.8 | ColumnrcStatMltEtherLateCollisions | read-only | current | The number of times that a collision is detected on a particular MLT later than 512 bit-times (64 octets) into the transmission of a packet. Five hundred and t… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.9 | ColumnrcStatMltEtherExcessiveCollis | read-only | current | A count of frames for which transmission on a particular MLT fails due to excessive collisions. |
| 1.3.6.1.4.1.2272.1.12.6.2.1.10 | ColumnrcStatMltEtherIMacTransmitError | read-only | current | A count of frames for which transmission on a particular MLT fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of th… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.11 | ColumnrcStatMltEtherCarrierSenseError | read-only | current | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular MLT. The count represented … |
| 1.3.6.1.4.1.2272.1.12.6.2.1.12 | ColumnrcStatMltEtherFrameTooLong | read-only | current | A count of frames received on a particular MLT that exceed the maximum permitted size (1518 octets). The count represented by an instance os this object is inc… |
| 1.3.6.1.4.1.2272.1.12.6.2.1.13 | ColumnrcStatMltEtherIMacReceiveError | read-only | current | A count of frames for which reception on a particular MLT fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this o… |
| 1.3.6.1.4.1.2272.1.12.6.4 | ScalarrcStatSmltIstDownCnt | read-only | current | Counters that counts how the session between the two peering switches has done down since last boot. |
| 1.3.6.1.4.1.2272.1.12.6.5 | ScalarrcStatSmltHelloTxMsgCnt | read-only | current | Counters that counts the tx hello msg. |
| 1.3.6.1.4.1.2272.1.12.6.6 | ScalarrcStatSmltHelloRxMsgCnt | read-only | current | Counters that counts the rx hello msg. |
| 1.3.6.1.4.1.2272.1.12.6.7 | ScalarrcStatSmltLearnMacAddrTxMsgCnt | read-only | current | Counters that counts the tx learn Mac Address msg. |
| 1.3.6.1.4.1.2272.1.12.6.8 | ScalarrcStatSmltLearnMacAddrRxMsgCnt | read-only | current | Counters that counts the rx learn Mac Address msg. |
| 1.3.6.1.4.1.2272.1.12.6.9 | ScalarrcStatSmltMacAddrAgeOutTxMsgCnt | read-only | current | Counters that counts the tx Mac Address Aging Out msg. |
| 1.3.6.1.4.1.2272.1.12.6.10 | ScalarrcStatSmltMacAddrAgeOutRxMsgCnt | read-only | current | Counters that counts the rx Mac Address Aging Out msg. |
| 1.3.6.1.4.1.2272.1.12.6.11 | ScalarrcStatSmltMacAddrAgeExpTxMsgCnt | read-only | current | Counters that counts the tx Mac Address age expired msg. |
| 1.3.6.1.4.1.2272.1.12.6.12 | ScalarrcStatSmltMacAddrAgeExpRxMsgCnt | read-only | current | Counters that counts the rx Mac Address age expired msg. |
| 1.3.6.1.4.1.2272.1.12.6.13 | ScalarrcStatSmltStgInfoTxMsgCnt | read-only | current | Counters that counts the tx Stg information msg. |
| 1.3.6.1.4.1.2272.1.12.6.14 | ScalarrcStatSmltStgInfoRxMsgCnt | read-only | current | Counters that counts the rx Stg information msg. |
| 1.3.6.1.4.1.2272.1.12.6.15 | ScalarrcStatSmltDelMacAddrTxMsgCnt | read-only | current | Counters that counts the tx deleted MAC address msg. |
| 1.3.6.1.4.1.2272.1.12.6.16 | ScalarrcStatSmltDelMacAddrRxMsgCnt | read-only | current | Counters that counts the rx deleted MAC address msg. |
| 1.3.6.1.4.1.2272.1.12.6.17 | ScalarrcStatSmltSmltDownTxMsgCnt | read-only | current | Counters that counts the tx Smlt Down msg. |
| 1.3.6.1.4.1.2272.1.12.6.18 | ScalarrcStatSmltSmltDownRxMsgCnt | read-only | current | Counters that counts the rx Smlt Down msg. |
| 1.3.6.1.4.1.2272.1.12.6.19 | ScalarrcStatSmltSmltUpTxMsgCnt | read-only | current | Counters that counts the tx Smlt Up msg. |
| 1.3.6.1.4.1.2272.1.12.6.20 | ScalarrcStatSmltSmltUpRxMsgCnt | read-only | current | Counters that counts the rx Smlt Up msg. |
| 1.3.6.1.4.1.2272.1.12.6.21 | ScalarrcStatSmltSendMacTblTxMsgCnt | read-only | current | Counters that counts the tx Send Mac Table msg. |
| 1.3.6.1.4.1.2272.1.12.6.22 | ScalarrcStatSmltSendMacTblRxMsgCnt | read-only | current | Counters that counts the rx Send Mac Table msg. |
| 1.3.6.1.4.1.2272.1.12.6.23 | ScalarrcStatSmltIgmpTxMsgCnt | read-only | current | Counters that counts the tx Igmp msg. |
| 1.3.6.1.4.1.2272.1.12.6.24 | ScalarrcStatSmltIgmpRxMsgCnt | read-only | current | Counters that counts the rx Igmp msg. |
| 1.3.6.1.4.1.2272.1.12.6.25 | ScalarrcStatSmltPortDownTxMsgCnt | read-only | current | Counters that counts the tx port down msg. |
| 1.3.6.1.4.1.2272.1.12.6.26 | ScalarrcStatSmltPortDownRxMsgCnt | read-only | current | Counters that counts the rx port down msg. |
| 1.3.6.1.4.1.2272.1.12.6.27 | ScalarrcStatSmltReqMacTblTxMsgCnt | read-only | current | Counters that counts the tx request Mac table msg. |
| 1.3.6.1.4.1.2272.1.12.6.28 | ScalarrcStatSmltReqMacTblRxMsgCnt | read-only | current | Counters that counts the rx request Mac table msg. |
| 1.3.6.1.4.1.2272.1.12.6.29 | ScalarrcStatSmltRxUnknownMsgTypeCnt | read-only | current | Counters that counts the rx unknown msg type. |
| 1.3.6.1.4.1.2272.1.12.9 | NodercStatMulticast | |||
| 1.3.6.1.4.1.2272.1.12.9.1 | ScalarrcStatMulticastSourceGroupThresholdExceeded | read-only | current | The count of number of times the threshold of available IP Multicast (Source,Group) Records was reached. When this threshold is reached, a new IP Multicast str… |
| 1.3.6.1.4.1.2272.1.12.9.2 | ScalarrcStatMulticastEgressStreamThresholdExceeded | read-only | current | The count of number of times the threshold of available IP Multicast Egress Forwarding Records was reached. When this threshold is reached, a new IP Multicast … |
| 1.3.6.1.4.1.2272.1.12.10 | NodercStatBgp | |||
| 1.3.6.1.4.1.2272.1.12.10.1 | ScalarrcStatBgpStarts | read-only | current | Number of times BGP connection started |
| 1.3.6.1.4.1.2272.1.12.10.2 | ScalarrcStatBgpStops | read-only | current | Number of times BGP connection stopped |
| 1.3.6.1.4.1.2272.1.12.10.3 | ScalarrcStatBgpOpens | read-only | current | Number of times BGP opens TCP |
| 1.3.6.1.4.1.2272.1.12.10.4 | ScalarrcStatBgpCloses | read-only | current | Number of times BGP closes TCP |
| 1.3.6.1.4.1.2272.1.12.10.5 | ScalarrcStatBgpFails | read-only | current | Number of times TCP attempts failed |
| 1.3.6.1.4.1.2272.1.12.10.6 | ScalarrcStatBgpFatals | read-only | current | Number of times TCP crashes due to fatal error |
| 1.3.6.1.4.1.2272.1.12.10.7 | ScalarrcStatBgpConnExps | read-only | current | Number of times TCP retry timer expired |
| 1.3.6.1.4.1.2272.1.12.10.8 | ScalarrcStatBgpHoldExps | read-only | current | Number of times hold timer expired |
| 1.3.6.1.4.1.2272.1.12.10.9 | ScalarrcStatBgpKeepExps | read-only | current | Number of times keepalive timer expired |
| 1.3.6.1.4.1.2272.1.12.10.10 | ScalarrcStatBgpRxOpens | read-only | current | Number of OPENs BGP receives |
| 1.3.6.1.4.1.2272.1.12.10.11 | ScalarrcStatBgpRxKeeps | read-only | current | Number of KEEPALIVEs BGP recieves |
| 1.3.6.1.4.1.2272.1.12.10.12 | ScalarrcStatBgpRxUpdates | read-only | current | Number of UPDATEs BGP recieves |
| 1.3.6.1.4.1.2272.1.12.10.13 | ScalarrcStatBgpRxNotifys | read-only | current | Number NOTIFICATIONs BGP recieves |
| 1.3.6.1.4.1.2272.1.12.10.14 | ScalarrcStatBgpTxOpens | read-only | current | Number of OPENs BGP transmitted |
| 1.3.6.1.4.1.2272.1.12.10.15 | ScalarrcStatBgpTxKeeps | read-only | current | Number of KEEPALIVEs BGP transmitted |
| 1.3.6.1.4.1.2272.1.12.10.16 | ScalarrcStatBgpTxUpdates | read-only | current | Number of UPDATEs BGP transmits |
| 1.3.6.1.4.1.2272.1.12.10.17 | ScalarrcStatBgpTxNotifys | read-only | current | Number of NOTIFICATIONs BGP transmits |
| 1.3.6.1.4.1.2272.1.12.10.18 | ScalarrcStatBgpBadEvents | read-only | current | Number of invalid events FSM received |
| 1.3.6.1.4.1.2272.1.12.10.19 | ScalarrcStatBgpSyncFails | read-only | current | Number of times FDB sync failed |
| 1.3.6.1.4.1.2272.1.12.10.20 | ScalarrcStatBgpTrEvent | read-only | current | Trace event |
| 1.3.6.1.4.1.2272.1.12.10.21 | ScalarrcStatBgpRxECodeHeader | read-only | current | Total Header errors received |
| 1.3.6.1.4.1.2272.1.12.10.22 | ScalarrcStatBgpRxECodeOpen | read-only | current | Total Open errors received |
| 1.3.6.1.4.1.2272.1.12.10.23 | ScalarrcStatBgpRxECodeUpdate | read-only | current | Total Update errors received |
| 1.3.6.1.4.1.2272.1.12.10.24 | ScalarrcStatBgpRxECodeHoldtimer | read-only | current | Total Holdtimer errors received |
| 1.3.6.1.4.1.2272.1.12.10.25 | ScalarrcStatBgpRxECodeFSM | read-only | current | Total FSM errors received |
| 1.3.6.1.4.1.2272.1.12.10.26 | ScalarrcStatBgpRxECodeCease | read-only | current | Total Cease errors received |
| 1.3.6.1.4.1.2272.1.12.10.27 | ScalarrcStatBgpRxHdrCodeNoSync | read-only | current | Header Not Synchronized errors received |
| 1.3.6.1.4.1.2272.1.12.10.28 | ScalarrcStatBgpRxHdrCodeInvalidMsgLen | read-only | current | Header Invalid msg len errors received |
| 1.3.6.1.4.1.2272.1.12.10.29 | ScalarrcStatBgpRxHdrCodeInvalidMsgType | read-only | current | Header Invalid msg type errors received |
| 1.3.6.1.4.1.2272.1.12.10.30 | ScalarrcStatBgpRxOpCodeBadVer | read-only | current | Open errors received: Bad Version |
| 1.3.6.1.4.1.2272.1.12.10.31 | ScalarrcStatBgpRxOpCodeBadAs | read-only | current | Open errors received: Bad AS Number |
| 1.3.6.1.4.1.2272.1.12.10.32 | ScalarrcStatBgpRxOpCodeBadRtID | read-only | current | Open errors received: Bad BGP Rtr ID |
| 1.3.6.1.4.1.2272.1.12.10.33 | ScalarrcStatBgpRxOpCodeUnsuppOption | read-only | current | Open errors received: Unsupported Option |
| 1.3.6.1.4.1.2272.1.12.10.34 | ScalarrcStatBgpRxOpCodeAuthFail | read-only | current | Open errors received: Auth Failures |
| 1.3.6.1.4.1.2272.1.12.10.35 | ScalarrcStatBgpRxOpCodeBadHold | read-only | current | Open errors received: Bad Hold Value |
| 1.3.6.1.4.1.2272.1.12.10.36 | ScalarrcStatBgpRxUpdCodeMalformedAttrList | read-only | current | Update errors received:Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.10.37 | ScalarrcStatBgpRxUpdCodeWelknownAttrUnrecog | read-only | current | Update errors received: Welknown Attr Unrecog |
| 1.3.6.1.4.1.2272.1.12.10.38 | ScalarrcStatBgpRxUpdCodeWelknownAttrMiss | read-only | current | Update errors received: Welknown Attr Missing |
| 1.3.6.1.4.1.2272.1.12.10.39 | ScalarrcStatBgpRxUpdCodeAttrFlagError | read-only | current | Update errors received: Attr Flag Error |
| 1.3.6.1.4.1.2272.1.12.10.40 | ScalarrcStatBgpRxUpdCodeAttrLenError | read-only | current | Update errors received: Attr Len Error |
| 1.3.6.1.4.1.2272.1.12.10.41 | ScalarrcStatBgpRxUpdCodeBadORIGINAttr | read-only | current | Update errors received: Bad ORIGIN Attr |
| 1.3.6.1.4.1.2272.1.12.10.42 | ScalarrcStatBgpRxUpdCodeASRoutingLoop | read-only | current | Update errors received: AS Routing Loop |
| 1.3.6.1.4.1.2272.1.12.10.43 | ScalarrcStatBgpRxUpdCodeBadNHAttr | read-only | current | Update errors received: Bad NEXT-HOP Attr |
| 1.3.6.1.4.1.2272.1.12.10.44 | ScalarrcStatBgpRxUpdCodeOptionalAttrError | read-only | current | Update errors received: Optional Attr Error |
| 1.3.6.1.4.1.2272.1.12.10.45 | ScalarrcStatBgpRxUpdCodeBadNetworkField | read-only | current | Update errors received: Bad Network Field |
| 1.3.6.1.4.1.2272.1.12.10.46 | ScalarrcStatBgpRxUpdCodeMalformedASPath | read-only | current | Update errors received: Malformed AS Path |
| 1.3.6.1.4.1.2272.1.12.10.47 | ScalarrcStatBgpTxECodeHeader | read-only | current | Total Header errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.48 | ScalarrcStatBgpTxECodeOpen | read-only | current | Total Open errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.49 | ScalarrcStatBgpTxECodeUpdate | read-only | current | Total Update errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.50 | ScalarrcStatBgpTxECodeHoldtimer | read-only | current | Total Holdtimer errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.51 | ScalarrcStatBgpTxECodeFSM | read-only | current | Total FSM errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.52 | ScalarrcStatBgpTxECodeCease | read-only | current | Total Cease errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.53 | ScalarrcStatBgpTxHdrCodeNoSync | read-only | current | Header Not Synchronized errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.54 | ScalarrcStatBgpTxHdrCodeInvalidMsgLen | read-only | current | Header Invalid msg len errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.55 | ScalarrcStatBgpTxHdrCodeInvalidMsgType | read-only | current | Header Invalid msg type errors transmitted |
| 1.3.6.1.4.1.2272.1.12.10.56 | ScalarrcStatBgpTxOpCodeBadVer | read-only | current | Open errors transmitted: Bad Version |
| 1.3.6.1.4.1.2272.1.12.10.57 | ScalarrcStatBgpTxOpCodeBadAs | read-only | current | Open errors transmitted: Bad AS Number |
| 1.3.6.1.4.1.2272.1.12.10.58 | ScalarrcStatBgpTxOpCodeBadRtID | read-only | current | Open errors transmitted: Bad BGP Rtr ID |
| 1.3.6.1.4.1.2272.1.12.10.59 | ScalarrcStatBgpTxOpCodeUnsuppOption | read-only | current | Open errors transmitted: Unsupported Option |
| 1.3.6.1.4.1.2272.1.12.10.60 | ScalarrcStatBgpTxOpCodeAuthFail | read-only | current | Open errors transmitted: Auth Failures |
| 1.3.6.1.4.1.2272.1.12.10.61 | ScalarrcStatBgpTxOpCodeBadHold | read-only | current | Open errors transmitted: Bad Hold Value |
| 1.3.6.1.4.1.2272.1.12.10.62 | ScalarrcStatBgpTxUpdCodeMalformedAttrList | read-only | current | Update errors transmitted:Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.10.63 | ScalarrcStatBgpTxUpdCodeWelknownAttrUnrecog | read-only | current | Update errors transmitted: Welknown Attr Unrecog |
| 1.3.6.1.4.1.2272.1.12.10.64 | ScalarrcStatBgpTxUpdCodeWelknownAttrMiss | read-only | current | Update errors transmitted: Welknown Attr Missing |
| 1.3.6.1.4.1.2272.1.12.10.65 | ScalarrcStatBgpTxUpdCodeAttrFlagError | read-only | current | Update errors transmitted: Attr Flag Error |
| 1.3.6.1.4.1.2272.1.12.10.66 | ScalarrcStatBgpTxUpdCodeAttrLenError | read-only | current | Update errors transmitted: Attr Len Error |
| 1.3.6.1.4.1.2272.1.12.10.67 | ScalarrcStatBgpTxUpdCodeBadORIGINAttr | read-only | current | Update errors transmitted: Bad ORIGIN Attr |
| 1.3.6.1.4.1.2272.1.12.10.68 | ScalarrcStatBgpTxUpdCodeASRoutingLoop | read-only | current | Update errors transmitted: AS Routing Loop |
| 1.3.6.1.4.1.2272.1.12.10.69 | ScalarrcStatBgpTxUpdCodeBadNHAttr | read-only | current | Update errors transmitted: Bad NEXT-HOP Attr |
| 1.3.6.1.4.1.2272.1.12.10.70 | ScalarrcStatBgpTxUpdCodeOptionalAttrError | read-only | current | Update errors transmitted: Optional Attr Error |
| 1.3.6.1.4.1.2272.1.12.10.71 | ScalarrcStatBgpTxUpdCodeBadNetworkField | read-only | current | Update errors transmitted: Bad Network Field |
| 1.3.6.1.4.1.2272.1.12.10.72 | ScalarrcStatBgpTxUpdCodeMalformedASPath | read-only | current | Update errors transmitted: Malformed AS Path |
| 1.3.6.1.4.1.2272.1.12.10.73 | ScalarrcStatBgpReset | read-write | current | reset Bgp global stats |
| 1.3.6.1.4.1.2272.1.12.11 | TablercStatBgpPeerTable | not-accessible | current | A table used to store Bgp Peer statistics. |
| 1.3.6.1.4.1.2272.1.12.11.1 | RowrcStatBgpPeerEntry | not-accessible | current | Bgp Peer statistics |
| 1.3.6.1.4.1.2272.1.12.11.1.1 | ColumnrcStatBgpPeerAddr | read-only | current | |
| 1.3.6.1.4.1.2272.1.12.11.1.2 | ColumnrcStatBgpPeerStarts | read-only | current | Number of times peer BGP connection started |
| 1.3.6.1.4.1.2272.1.12.11.1.3 | ColumnrcStatBgpPeerStops | read-only | current | Number of times peer BGP connection stopped |
| 1.3.6.1.4.1.2272.1.12.11.1.4 | ColumnrcStatBgpPeerOpens | read-only | current | Number of times peer opens TCP |
| 1.3.6.1.4.1.2272.1.12.11.1.5 | ColumnrcStatBgpPeerCloses | read-only | current | Number of times peer closes TCP |
| 1.3.6.1.4.1.2272.1.12.11.1.6 | ColumnrcStatBgpPeerFails | read-only | current | Number of times peer TCP attempts failed |
| 1.3.6.1.4.1.2272.1.12.11.1.7 | ColumnrcStatBgpPeerFatals | read-only | current | Number of times peer TCP crashes due to fatal error |
| 1.3.6.1.4.1.2272.1.12.11.1.8 | ColumnrcStatBgpPeerConnExps | read-only | current | Number of times peer TCP retry timer expired |
| 1.3.6.1.4.1.2272.1.12.11.1.9 | ColumnrcStatBgpPeerHoldExps | read-only | current | Number of times peer hold timer expired |
| 1.3.6.1.4.1.2272.1.12.11.1.10 | ColumnrcStatBgpPeerKeepExps | read-only | current | Number of times peer keepalive timer expired |
| 1.3.6.1.4.1.2272.1.12.11.1.11 | ColumnrcStatBgpPeerTxMsgs | read-only | current | Total messages send by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.12 | ColumnrcStatBgpPeerTxOpens | read-only | current | Opens sent by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.13 | ColumnrcStatBgpPeerTxKeeps | read-only | current | Keepalives sent by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.14 | ColumnrcStatBgpPeerTxUpdates | read-only | current | Updates sent by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.15 | ColumnrcStatBgpPeerTxNotifys | read-only | current | Notifications sent by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.16 | ColumnrcStatBgpPeerRxMsgs | read-only | current | Total messages received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.17 | ColumnrcStatBgpPeerRxInCompPkts | read-only | current | Incomplete message received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.18 | ColumnrcStatBgpPeerRxOpens | read-only | current | Opens received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.19 | ColumnrcStatBgpPeerRxKeeps | read-only | current | Keepalives received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.20 | ColumnrcStatBgpPeerRxUpdates | read-only | current | Updates received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.21 | ColumnrcStatBgpPeerRxNotifys | read-only | current | Notifications received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.22 | ColumnrcStatBgpPeerBadEvents | read-only | current | Number of invalid events received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.23 | ColumnrcStatBgpPeerSyncFails | read-only | current | Number of times FDB sync failed of the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.24 | ColumnrcStatBgpPeerRcvdTooShort | read-only | current | Number of messages recieved by the peer that is too sho rt |
| 1.3.6.1.4.1.2272.1.12.11.1.25 | ColumnrcStatBgpPeerNoMarker | read-only | current | Number of messages without marker recieved by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.26 | ColumnrcStatBgpPeerDropped | read-only | current | Number of messages the peer has dropped |
| 1.3.6.1.4.1.2272.1.12.11.1.27 | ColumnrcStatBgpPeerBadMsgTypes | read-only | current | Number of messages with invalid message type |
| 1.3.6.1.4.1.2272.1.12.11.1.28 | ColumnrcStatBgpPeerTrEvent | read-only | current | Peer trace event |
| 1.3.6.1.4.1.2272.1.12.11.1.29 | ColumnrcStatBgpPeerTxRoutes | read-only | current | Number of NLRI sent by peer |
| 1.3.6.1.4.1.2272.1.12.11.1.30 | ColumnrcStatBgpPeerRxRoutesAdded | read-only | current | Number of routes added into loc_rib by this peer |
| 1.3.6.1.4.1.2272.1.12.11.1.31 | ColumnrcStatBgpPeerRxRoutesReplaced | read-only | current | Number of routes replaced by the routes received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.32 | ColumnrcStatBgpPeerRxNlri | read-only | current | Number of NLRI received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.33 | ColumnrcStatBgpPeerRxValidUpdates | read-only | current | Number of valid UPDATEs received by the peer |
| 1.3.6.1.4.1.2272.1.12.11.1.34 | ColumnrcStatBgpPeerRxECodeHeader | read-only | current | Total errors peer received: Header |
| 1.3.6.1.4.1.2272.1.12.11.1.35 | ColumnrcStatBgpPeerRxECodeOpen | read-only | current | Total errors peer received: Open |
| 1.3.6.1.4.1.2272.1.12.11.1.36 | ColumnrcStatBgpPeerRxECodeUpdate | read-only | current | Total errors peer received: Update |
| 1.3.6.1.4.1.2272.1.12.11.1.37 | ColumnrcStatBgpPeerRxECodeHoldtimer | read-only | current | Total errors peer received: Hold |
| 1.3.6.1.4.1.2272.1.12.11.1.38 | ColumnrcStatBgpPeerRxECodeFSM | read-only | current | Total errors peer received: Fsm |
| 1.3.6.1.4.1.2272.1.12.11.1.39 | ColumnrcStatBgpPeerRxECodeCease | read-only | current | Total errors peer received: Cease |
| 1.3.6.1.4.1.2272.1.12.11.1.40 | ColumnrcStatBgpPeerRxHdrCodeNoSync | read-only | current | Header errors peer received: Not Synchronized |
| 1.3.6.1.4.1.2272.1.12.11.1.41 | ColumnrcStatBgpPeerRxHdrCodeInvalidMsgLen | read-only | current | Header errors peer received: Invalid message length |
| 1.3.6.1.4.1.2272.1.12.11.1.42 | ColumnrcStatBgpPeerRxHdrCodeInvalidMsgType | read-only | current | Header errors peer received: Invalid message type |
| 1.3.6.1.4.1.2272.1.12.11.1.43 | ColumnrcStatBgpPeerRxOpCodeBadVer | read-only | current | Open errors peer received: Bad Version |
| 1.3.6.1.4.1.2272.1.12.11.1.44 | ColumnrcStatBgpPeerRxOpCodeBadAs | read-only | current | Open errors peer received: Bad AS number |
| 1.3.6.1.4.1.2272.1.12.11.1.45 | ColumnrcStatBgpPeerRxOpCodeBadRtID | read-only | current | Open errors peer received: Bad BGP ID |
| 1.3.6.1.4.1.2272.1.12.11.1.46 | ColumnrcStatBgpPeerRxOpCodeUnsuppOption | read-only | current | Open errors peer received: Unsupported Options |
| 1.3.6.1.4.1.2272.1.12.11.1.47 | ColumnrcStatBgpPeerRxOpCodeAuthFail | read-only | current | Open errors peer received: Authorization failures |
| 1.3.6.1.4.1.2272.1.12.11.1.48 | ColumnrcStatBgpPeerRxOpCodeBadHold | read-only | current | Open errors peer received: Bad Hold value |
| 1.3.6.1.4.1.2272.1.12.11.1.49 | ColumnrcStatBgpPeerRxUpdCodeMalformedAttrList | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.50 | ColumnrcStatBgpPeerRxUpdCodeWelknownAttrUnrecog | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.51 | ColumnrcStatBgpPeerRxUpdCodeWelknownAttrMiss | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.52 | ColumnrcStatBgpPeerRxUpdCodeAttrFlagError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.53 | ColumnrcStatBgpPeerRxUpdCodeAttrLenError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.54 | ColumnrcStatBgpPeerRxUpdCodeBadORIGINAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.55 | ColumnrcStatBgpPeerRxUpdCodeASRoutingLoop | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.56 | ColumnrcStatBgpPeerRxUpdCodeBadNHAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.57 | ColumnrcStatBgpPeerRxUpdCodeOptionalAttrError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.58 | ColumnrcStatBgpPeerRxUpdCodeBadNetworkField | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.59 | ColumnrcStatBgpPeerRxUpdCodeMalformedASPath | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.60 | ColumnrcStatBgpPeerTxECodeHeader | read-only | current | Total errors peer received: Header |
| 1.3.6.1.4.1.2272.1.12.11.1.61 | ColumnrcStatBgpPeerTxECodeOpen | read-only | current | Total errors peer received: Open |
| 1.3.6.1.4.1.2272.1.12.11.1.62 | ColumnrcStatBgpPeerTxECodeUpdate | read-only | current | Total errors peer received: Update |
| 1.3.6.1.4.1.2272.1.12.11.1.63 | ColumnrcStatBgpPeerTxECodeHoldtimer | read-only | current | Total errors peer received: Hold |
| 1.3.6.1.4.1.2272.1.12.11.1.64 | ColumnrcStatBgpPeerTxECodeFSM | read-only | current | Total errors peer received: Fsm |
| 1.3.6.1.4.1.2272.1.12.11.1.65 | ColumnrcStatBgpPeerTxECodeCease | read-only | current | Total errors peer received: Cease |
| 1.3.6.1.4.1.2272.1.12.11.1.66 | ColumnrcStatBgpPeerTxHdrCodeNoSync | read-only | current | Header errors peer received: Not Synchronized |
| 1.3.6.1.4.1.2272.1.12.11.1.67 | ColumnrcStatBgpPeerTxHdrCodeInvalidMsgLen | read-only | current | Header errors peer received: Invalid message length |
| 1.3.6.1.4.1.2272.1.12.11.1.68 | ColumnrcStatBgpPeerTxHdrCodeInvalidMsgType | read-only | current | Header errors peer received: Invalid message type |
| 1.3.6.1.4.1.2272.1.12.11.1.69 | ColumnrcStatBgpPeerTxOpCodeBadVer | read-only | current | Open errors peer received: Bad Version |
| 1.3.6.1.4.1.2272.1.12.11.1.70 | ColumnrcStatBgpPeerTxOpCodeBadAs | read-only | current | Open errors peer received: Bad AS number |
| 1.3.6.1.4.1.2272.1.12.11.1.71 | ColumnrcStatBgpPeerTxOpCodeBadRtID | read-only | current | Open errors peer received: Bad BGP ID |
| 1.3.6.1.4.1.2272.1.12.11.1.72 | ColumnrcStatBgpPeerTxOpCodeUnsuppOption | read-only | current | Open errors peer received: Unsupported Options |
| 1.3.6.1.4.1.2272.1.12.11.1.73 | ColumnrcStatBgpPeerTxOpCodeAuthFail | read-only | current | Open errors peer received: Authorization failures |
| 1.3.6.1.4.1.2272.1.12.11.1.74 | ColumnrcStatBgpPeerTxOpCodeBadHold | read-only | current | Open errors peer received: Bad Hold value |
| 1.3.6.1.4.1.2272.1.12.11.1.75 | ColumnrcStatBgpPeerTxUpdCodeMalformedAttrList | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.76 | ColumnrcStatBgpPeerTxUpdCodeWelknownAttrUnrecog | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.77 | ColumnrcStatBgpPeerTxUpdCodeWelknownAttrMiss | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.78 | ColumnrcStatBgpPeerTxUpdCodeAttrFlagError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.79 | ColumnrcStatBgpPeerTxUpdCodeAttrLenError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.80 | ColumnrcStatBgpPeerTxUpdCodeBadORIGINAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.81 | ColumnrcStatBgpPeerTxUpdCodeASRoutingLoop | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.82 | ColumnrcStatBgpPeerTxUpdCodeBadNHAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.83 | ColumnrcStatBgpPeerTxUpdCodeOptionalAttrError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.84 | ColumnrcStatBgpPeerTxUpdCodeBadNetworkField | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.85 | ColumnrcStatBgpPeerTxUpdCodeMalformedASPath | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.11.1.86 | ColumnrcStatBgpPeerReset | read-write | current | reset peer stats |
| 1.3.6.1.4.1.2272.1.12.13 | TablercStatBgpPeerAfTable | not-accessible | current | A table used to store v4/v6 Bgp Peer statistics. |
| 1.3.6.1.4.1.2272.1.12.13.1 | RowrcStatBgpPeerAfEntry | not-accessible | current | AF independent Bgp Peer statistics |
| 1.3.6.1.4.1.2272.1.12.13.1.1 | ColumnrcStatBgpPeerAfAddrType | not-accessible | current | Inet address type of the AF independent peer |
| 1.3.6.1.4.1.2272.1.12.13.1.2 | ColumnrcStatBgpPeerAfAddr | not-accessible | current | Inet address of the AF independent peer |
| 1.3.6.1.4.1.2272.1.12.13.1.3 | ColumnrcStatBgpPeerAfStarts | read-only | current | Number of times peer BGP connection started |
| 1.3.6.1.4.1.2272.1.12.13.1.4 | ColumnrcStatBgpPeerAfStops | read-only | current | Number of times peer BGP connection stopped |
| 1.3.6.1.4.1.2272.1.12.13.1.5 | ColumnrcStatBgpPeerAfOpens | read-only | current | Number of times peer opens TCP |
| 1.3.6.1.4.1.2272.1.12.13.1.6 | ColumnrcStatBgpPeerAfCloses | read-only | current | Number of times peer closes TCP |
| 1.3.6.1.4.1.2272.1.12.13.1.7 | ColumnrcStatBgpPeerAfFails | read-only | current | Number of times peer TCP attempts failed |
| 1.3.6.1.4.1.2272.1.12.13.1.8 | ColumnrcStatBgpPeerAfFatals | read-only | current | Number of times peer TCP crashes due to fatal error |
| 1.3.6.1.4.1.2272.1.12.13.1.9 | ColumnrcStatBgpPeerAfConnExps | read-only | current | Number of times peer TCP retry timer expired |
| 1.3.6.1.4.1.2272.1.12.13.1.10 | ColumnrcStatBgpPeerAfHoldExps | read-only | current | Number of times peer hold timer expired |
| 1.3.6.1.4.1.2272.1.12.13.1.11 | ColumnrcStatBgpPeerAfKeepExps | read-only | current | Number of times peer keepalive timer expired |
| 1.3.6.1.4.1.2272.1.12.13.1.12 | ColumnrcStatBgpPeerAfTxMsgs | read-only | current | Total messages send by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.13 | ColumnrcStatBgpPeerAfTxOpens | read-only | current | Opens sent by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.14 | ColumnrcStatBgpPeerAfTxKeeps | read-only | current | Keepalives sent by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.15 | ColumnrcStatBgpPeerAfTxUpdates | read-only | current | Updates sent by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.16 | ColumnrcStatBgpPeerAfTxNotifys | read-only | current | Notifications sent by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.17 | ColumnrcStatBgpPeerAfRxMsgs | read-only | current | Total messages received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.18 | ColumnrcStatBgpPeerAfRxInCompPkts | read-only | current | Incomplete message received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.19 | ColumnrcStatBgpPeerAfRxOpens | read-only | current | Opens received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.20 | ColumnrcStatBgpPeerAfRxKeeps | read-only | current | Keepalives received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.21 | ColumnrcStatBgpPeerAfRxUpdates | read-only | current | Updates received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.22 | ColumnrcStatBgpPeerAfRxNotifys | read-only | current | Notifications received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.23 | ColumnrcStatBgpPeerAfBadEvents | read-only | current | Number of invalid events received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.24 | ColumnrcStatBgpPeerAfSyncFails | read-only | current | Number of times FDB sync failed of the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.25 | ColumnrcStatBgpPeerAfRcvdTooShort | read-only | current | Number of messages recieved by the peer that is too sho rt |
| 1.3.6.1.4.1.2272.1.12.13.1.26 | ColumnrcStatBgpPeerAfNoMarker | read-only | current | Number of messages without marker recieved by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.27 | ColumnrcStatBgpPeerAfDropped | read-only | current | Number of messages the peer has dropped |
| 1.3.6.1.4.1.2272.1.12.13.1.28 | ColumnrcStatBgpPeerAfBadMsgTypes | read-only | current | Number of messages with invalid message type |
| 1.3.6.1.4.1.2272.1.12.13.1.29 | ColumnrcStatBgpPeerAfTrEvent | read-only | current | Peer trace event |
| 1.3.6.1.4.1.2272.1.12.13.1.30 | ColumnrcStatBgpPeerAfTxRoutes | read-only | current | Number of NLRI sent by peer |
| 1.3.6.1.4.1.2272.1.12.13.1.31 | ColumnrcStatBgpPeerAfRxRoutesAdded | read-only | current | Number of routes added into loc_rib by this peer |
| 1.3.6.1.4.1.2272.1.12.13.1.32 | ColumnrcStatBgpPeerAfRxRoutesReplaced | read-only | current | Number of routes replaced by the routes received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.33 | ColumnrcStatBgpPeerAfRxNlri | read-only | current | Number of NLRI received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.34 | ColumnrcStatBgpPeerAfRxValidUpdates | read-only | current | Number of valid UPDATEs received by the peer |
| 1.3.6.1.4.1.2272.1.12.13.1.35 | ColumnrcStatBgpPeerAfRxECodeHeader | read-only | current | Total errors peer received: Header |
| 1.3.6.1.4.1.2272.1.12.13.1.36 | ColumnrcStatBgpPeerAfRxECodeOpen | read-only | current | Total errors peer received: Open |
| 1.3.6.1.4.1.2272.1.12.13.1.37 | ColumnrcStatBgpPeerAfRxECodeUpdate | read-only | current | Total errors peer received: Update |
| 1.3.6.1.4.1.2272.1.12.13.1.38 | ColumnrcStatBgpPeerAfRxECodeHoldtimer | read-only | current | Total errors peer received: Hold |
| 1.3.6.1.4.1.2272.1.12.13.1.39 | ColumnrcStatBgpPeerAfRxECodeFSM | read-only | current | Total errors peer received: Fsm |
| 1.3.6.1.4.1.2272.1.12.13.1.40 | ColumnrcStatBgpPeerAfRxECodeCease | read-only | current | Total errors peer received: Cease |
| 1.3.6.1.4.1.2272.1.12.13.1.41 | ColumnrcStatBgpPeerAfRxHdrCodeNoSync | read-only | current | Header errors peer received: Not Synchronized |
| 1.3.6.1.4.1.2272.1.12.13.1.42 | ColumnrcStatBgpPeerAfRxHdrCodeInvalidMsgLen | read-only | current | Header errors peer received: Invalid message length |
| 1.3.6.1.4.1.2272.1.12.13.1.43 | ColumnrcStatBgpPeerAfRxHdrCodeInvalidMsgType | read-only | current | Header errors peer received: Invalid message type |
| 1.3.6.1.4.1.2272.1.12.13.1.44 | ColumnrcStatBgpPeerAfRxOpCodeBadVer | read-only | current | Open errors peer received: Bad Version |
| 1.3.6.1.4.1.2272.1.12.13.1.45 | ColumnrcStatBgpPeerAfRxOpCodeBadAs | read-only | current | Open errors peer received: Bad AS number |
| 1.3.6.1.4.1.2272.1.12.13.1.46 | ColumnrcStatBgpPeerAfRxOpCodeBadRtID | read-only | current | Open errors peer received: Bad BGP ID |
| 1.3.6.1.4.1.2272.1.12.13.1.47 | ColumnrcStatBgpPeerAfRxOpCodeUnsuppOption | read-only | current | Open errors peer received: Unsupported Options |
| 1.3.6.1.4.1.2272.1.12.13.1.48 | ColumnrcStatBgpPeerAfRxOpCodeAuthFail | read-only | current | Open errors peer received: Authorization failures |
| 1.3.6.1.4.1.2272.1.12.13.1.49 | ColumnrcStatBgpPeerAfRxOpCodeBadHold | read-only | current | Open errors peer received: Bad Hold value |
| 1.3.6.1.4.1.2272.1.12.13.1.50 | ColumnrcStatBgpPeerAfRxUpdCodeMalformedAttrList | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.51 | ColumnrcStatBgpPeerAfRxUpdCodeWelknownAttrUnrecog | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.52 | ColumnrcStatBgpPeerAfRxUpdCodeWelknownAttrMiss | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.53 | ColumnrcStatBgpPeerAfRxUpdCodeAttrFlagError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.54 | ColumnrcStatBgpPeerAfRxUpdCodeAttrLenError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.55 | ColumnrcStatBgpPeerAfRxUpdCodeBadORIGINAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.56 | ColumnrcStatBgpPeerAfRxUpdCodeASRoutingLoop | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.57 | ColumnrcStatBgpPeerAfRxUpdCodeBadNHAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.58 | ColumnrcStatBgpPeerAfRxUpdCodeOptionalAttrError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.59 | ColumnrcStatBgpPeerAfRxUpdCodeBadNetworkField | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.60 | ColumnrcStatBgpPeerAfRxUpdCodeMalformedASPath | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.61 | ColumnrcStatBgpPeerAfTxECodeHeader | read-only | current | Total errors peer received: Header |
| 1.3.6.1.4.1.2272.1.12.13.1.62 | ColumnrcStatBgpPeerAfTxECodeOpen | read-only | current | Total errors peer received: Open |
| 1.3.6.1.4.1.2272.1.12.13.1.63 | ColumnrcStatBgpPeerAfTxECodeUpdate | read-only | current | Total errors peer received: Update |
| 1.3.6.1.4.1.2272.1.12.13.1.64 | ColumnrcStatBgpPeerAfTxECodeHoldtimer | read-only | current | Total errors peer received: Hold |
| 1.3.6.1.4.1.2272.1.12.13.1.65 | ColumnrcStatBgpPeerAfTxECodeFSM | read-only | current | Total errors peer received: Fsm |
| 1.3.6.1.4.1.2272.1.12.13.1.66 | ColumnrcStatBgpPeerAfTxECodeCease | read-only | current | Total errors peer received: Cease |
| 1.3.6.1.4.1.2272.1.12.13.1.67 | ColumnrcStatBgpPeerAfTxHdrCodeNoSync | read-only | current | Header errors peer received: Not Synchronized |
| 1.3.6.1.4.1.2272.1.12.13.1.68 | ColumnrcStatBgpPeerAfTxHdrCodeInvalidMsgLen | read-only | current | Header errors peer received: Invalid message length |
| 1.3.6.1.4.1.2272.1.12.13.1.69 | ColumnrcStatBgpPeerAfTxHdrCodeInvalidMsgType | read-only | current | Header errors peer received: Invalid message type |
| 1.3.6.1.4.1.2272.1.12.13.1.70 | ColumnrcStatBgpPeerAfTxOpCodeBadVer | read-only | current | Open errors peer received: Bad Version |
| 1.3.6.1.4.1.2272.1.12.13.1.71 | ColumnrcStatBgpPeerAfTxOpCodeBadAs | read-only | current | Open errors peer received: Bad AS number |
| 1.3.6.1.4.1.2272.1.12.13.1.72 | ColumnrcStatBgpPeerAfTxOpCodeBadRtID | read-only | current | Open errors peer received: Bad BGP ID |
| 1.3.6.1.4.1.2272.1.12.13.1.73 | ColumnrcStatBgpPeerAfTxOpCodeUnsuppOption | read-only | current | Open errors peer received: Unsupported Options |
| 1.3.6.1.4.1.2272.1.12.13.1.74 | ColumnrcStatBgpPeerAfTxOpCodeAuthFail | read-only | current | Open errors peer received: Authorization failures |
| 1.3.6.1.4.1.2272.1.12.13.1.75 | ColumnrcStatBgpPeerAfTxOpCodeBadHold | read-only | current | Open errors peer received: Bad Hold value |
| 1.3.6.1.4.1.2272.1.12.13.1.76 | ColumnrcStatBgpPeerAfTxUpdCodeMalformedAttrList | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.77 | ColumnrcStatBgpPeerAfTxUpdCodeWelknownAttrUnrecog | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.78 | ColumnrcStatBgpPeerAfTxUpdCodeWelknownAttrMiss | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.79 | ColumnrcStatBgpPeerAfTxUpdCodeAttrFlagError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.80 | ColumnrcStatBgpPeerAfTxUpdCodeAttrLenError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.81 | ColumnrcStatBgpPeerAfTxUpdCodeBadORIGINAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.82 | ColumnrcStatBgpPeerAfTxUpdCodeASRoutingLoop | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.83 | ColumnrcStatBgpPeerAfTxUpdCodeBadNHAttr | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.84 | ColumnrcStatBgpPeerAfTxUpdCodeOptionalAttrError | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.85 | ColumnrcStatBgpPeerAfTxUpdCodeBadNetworkField | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.86 | ColumnrcStatBgpPeerAfTxUpdCodeMalformedASPath | read-only | current | Update errors peer received: Malformed Attr List |
| 1.3.6.1.4.1.2272.1.12.13.1.87 | ColumnrcStatBgpPeerAfReset | read-create | current | reset peer stats |
| 1.3.6.1.4.1.2272.1.13 | NodercStg | |||
| 1.3.6.1.4.1.2272.1.13.1 | ScalarrcStgMaxStgs | read-write | current | The maximum number of spanning tree groups this device can support concurrently. |
| 1.3.6.1.4.1.2272.1.13.2 | ScalarrcStgNumStgs | read-only | current | The number of spanning tree groups that are currently defined. |
| 1.3.6.1.4.1.2272.1.13.3 | ScalarrcStgUnassignedPorts | read-only | current | A bitfield used to identify which ports in the system currently not assigned to any STG. The bitfield is 32 octets long representing ports 0 to 255 (inclusive). |
| 1.3.6.1.4.1.2272.1.13.4 | TablercStgTable | not-accessible | current | A table used to store Spanning Tree Group (STG) information. Each row in the table specifies a different STG in the device. |
| 1.3.6.1.4.1.2272.1.13.4.1 | RowrcStgEntry | not-accessible | current | STG attributes |
| 1.3.6.1.4.1.2272.1.13.4.1.1 | ColumnrcStgId | read-only | current | An identifier used to identify a STG in the device. |
| 1.3.6.1.4.1.2272.1.13.4.1.2 | ColumnrcStgTaggedBpduAddress | read-write | current | The MAC address to be assigned to the destination mac address field in tagged BPDUs. The default address is the well known multicast group address 01-80-c2-00-… |
| 1.3.6.1.4.1.2272.1.13.4.1.3 | ColumnrcStgTaggedBpduVlanId | read-write | current | The VLAN ID to be used for tagging BPDUs. |
| 1.3.6.1.4.1.2272.1.13.4.1.4 | ColumnrcStgBridgeAddress | read-only | current | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.2272.1.13.4.1.5 | ColumnrcStgNumPorts | read-only | current | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.2272.1.13.4.1.6 | ColumnrcStgProtocolSpecification | read-only | current | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.2272.1.13.4.1.7 | ColumnrcStgPriority | read-write | current | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID ar… |
| 1.3.6.1.4.1.2272.1.13.4.1.8 | ColumnrcStgTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.2272.1.13.4.1.9 | ColumnrcStgTopChanges | read-only | current | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.2272.1.13.4.1.10 | ColumnrcStgDesignatedRoot | read-only | current | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.2272.1.13.4.1.11 | ColumnrcStgRootCost | read-only | current | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.2272.1.13.4.1.12 | ColumnrcStgRootPort | read-only | current | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.2272.1.13.4.1.13 | ColumnrcStgMaxAge | read-only | current | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.2272.1.13.4.1.14 | ColumnrcStgHelloTime | read-only | current | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.2272.1.13.4.1.15 | ColumnrcStgHoldTime | read-only | current | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.2272.1.13.4.1.16 | ColumnrcStgForwardDelay | read-only | current | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.2272.1.13.4.1.17 | ColumnrcStgBridgeMaxAge | read-write | current | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related … |
| 1.3.6.1.4.1.2272.1.13.4.1.18 | ColumnrcStgBridgeHelloTime | read-write | current | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second.… |
| 1.3.6.1.4.1.2272.1.13.4.1.19 | ColumnrcStgBridgeForwardDelay | read-write | current | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is re… |
| 1.3.6.1.4.1.2272.1.13.4.1.20 | ColumnrcStgEnableStp | read-write | current | Indicate whether the spanning tree protocol should be active in this STG. |
| 1.3.6.1.4.1.2272.1.13.4.1.21 | ColumnrcStgStpTrapEnable | read-write | current | Indicate whether traps relating to the spanning tree protocol should be sent for this STG. |
| 1.3.6.1.4.1.2272.1.13.4.1.22 | ColumnrcStgPortMembers | read-write | current | A bitfield used to identify which ports in the system are members this STG. The bitfield is 104 octets long representing ports 64 (1/1) to 831 (12/68) (inclusi… |
| 1.3.6.1.4.1.2272.1.13.4.1.23 | ColumnrcStgRowStatus | read-write | current | Row status. |
| 1.3.6.1.4.1.2272.1.13.4.1.24 | ColumnrcStgPortStpState | read-only | current | Every 2 bitfields used to identify a port state in this STG. Port state is cataloged as non-stp(0), blocking(1), learning(2), and forwarding(3). |
| 1.3.6.1.4.1.2272.1.13.5 | TablercStgPortTable | not-accessible | current | A table used to store Spanning Tree Group (STG) port related information. If a port is associated with more than one STGs, the port will have one entry in this… |
| 1.3.6.1.4.1.2272.1.13.5.1 | RowrcStgPortEntry | not-accessible | current | STG Port attributes |
| 1.3.6.1.4.1.2272.1.13.5.1.1 | ColumnrcStgPort | read-only | current | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.2272.1.13.5.1.2 | ColumnrcStgPortStgId | read-only | current | The STG identifier this port is assigned to. |
| 1.3.6.1.4.1.2272.1.13.5.1.3 | ColumnrcStgPortPriority | read-write | current | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.2272.1.13.5.1.4 | ColumnrcStgPortState | read-only | current | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.2272.1.13.5.1.5 | ColumnrcStgPortEnableStp | read-write | current | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.2272.1.13.5.1.6 | ColumnrcStgPortFastStart | read-write | current | When this flag is set, the port is moved straight to the forwarding(5) state upon being enabled. |
| 1.3.6.1.4.1.2272.1.13.5.1.7 | ColumnrcStgPortPathCost | read-write | current | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.2272.1.13.5.1.8 | ColumnrcStgPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.2272.1.13.5.1.9 | ColumnrcStgPortDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.2272.1.13.5.1.10 | ColumnrcStgPortDesignatedBridge | read-only | current | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.2272.1.13.5.1.11 | ColumnrcStgPortDesignatedPort | read-only | current | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.2272.1.13.5.1.12 | ColumnrcStgPortForwardTransitions | read-only | current | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.2272.1.13.5.1.13 | ColumnrcStgPortInConfigBpdus | read-only | current | The number of Config BPUDs received by this port. |
| 1.3.6.1.4.1.2272.1.13.5.1.14 | ColumnrcStgPortInTcnBpdus | read-only | current | The number of Topology Change Notification BPUDs received by this port. |
| 1.3.6.1.4.1.2272.1.13.5.1.15 | ColumnrcStgPortInBadBpdus | read-only | current | The number of Bad BPUDs received by this port. |
| 1.3.6.1.4.1.2272.1.13.5.1.16 | ColumnrcStgPortOutConfigBpdus | read-only | current | The number of Config BPUDs transmitted by this port. |
| 1.3.6.1.4.1.2272.1.13.5.1.17 | ColumnrcStgPortOutTcnBpdus | read-only | current | The number of Topology Change Notification BPUDs transmitted by this port. |
| 1.3.6.1.4.1.2272.1.13.5.1.18 | ColumnrcStgPortRowStatus | read-write | current | Row status. |
| 1.3.6.1.4.1.2272.1.13.5.1.19 | ColumnrcStgPortChangeDetection | read-write | current | If disabled, topology change notifications are not sent for the port. |
| 1.3.6.1.4.1.2272.1.13.5.1.20 | ColumnrcStgPortPathCost32 | read-write | current | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1998 recommends that the default value o… |
| 1.3.6.1.4.1.2272.1.14 | NodercBridge | |||
| 1.3.6.1.4.1.2272.1.14.2 | ScalarrcBridgeFdbTblSize | read-only | current | Used to indicate the number of entries in the bridge forwarding database table. |
| 1.3.6.1.4.1.2272.1.14.3 | TablercBridgeStaticTable | not-accessible | current | This table is a proprietary replacement to the standard dot1dStaticTable in rfc1493. |
| 1.3.6.1.4.1.2272.1.14.3.1 | RowrcBridgeStaticEntry | not-accessible | current | A table containing forwarding information about unicast entries configured into the bridge by management. This information is used by the transparent bridging … |
| 1.3.6.1.4.1.2272.1.14.3.1.1 | ColumnrcBridgeStaticAddress | read-only | current | The MAC address of this entry. |
| 1.3.6.1.4.1.2272.1.14.3.1.2 | ColumnrcBridgeStaticPort | read-only | current | Port on which the MAC address is found. |
| 1.3.6.1.4.1.2272.1.14.3.1.5 | ColumnrcBridgeStaticStatus | read-write | current | This object indicates the status of this entry. The default value is permanent(3). |
| 1.3.6.1.4.1.2272.1.14.3.1.7 | ColumnrcBridgeStaticVlanId | read-only | current | |
| 1.3.6.1.4.1.2272.1.14.4 | ScalarrcBridgeStaticTblSize | read-only | current | Used to indicate the number of entries in the bridge static table. |
| 1.3.6.1.4.1.2272.1.14.7 | TablercBridgeUnknownMacDiscardTable | not-accessible | current | This table is used to configure the 'unknown mac discard' feature. This feature applies to layer 2 and layer 3 packets coming from or going out to a specific p… |
| 1.3.6.1.4.1.2272.1.14.7.1 | RowrcBridgeUnknownMacDiscardEntry | not-accessible | current | A table containing information configuring the 'unknown mac discard' feature. |
| 1.3.6.1.4.1.2272.1.14.7.1.1 | ColumnrcBridgeUnknownMacDiscardIfIndex | read-only | current | Port on which this 'unknown mac discard' configuration applied to. |
| 1.3.6.1.4.1.2272.1.14.7.1.2 | ColumnrcBridgeUnknownMacDiscardAutoLearnEnable | read-write | current | This variable is used to enable/disable the auto-learn capability of a specific port. The default value is auto-learn disabled. |
| 1.3.6.1.4.1.2272.1.14.7.1.3 | ColumnrcBridgeUnknownMacDiscardAutoLearnMode | read-write | current | This variable is used to control the auto-learn mode to either one-shot or continuous. In one-shot mode, the first n MAC addresses will be learned. The number … |
| 1.3.6.1.4.1.2272.1.14.7.1.4 | ColumnrcBridgeUnknownMacDiscardAutoLearnTableMode | read-write | current | This MIB variable is used to lock or unlock the auto-learn MAC table. When the auto-learn table is lock neither new MAC will be learned nor the original learne… |
| 1.3.6.1.4.1.2272.1.14.7.1.5 | ColumnrcBridgeUnknownMacDiscardLogViolations | read-write | current | This variable controls the logging action that the system will take when a MAC address violation event was detected. The value 'enable' means a log record will… |
| 1.3.6.1.4.1.2272.1.14.7.1.6 | ColumnrcBridgeUnknownMacDiscardSendTrap | read-write | current | This variable controls the send trap action that system will take when a MAC address violation event was detected. The value 'enable' means a SNMP trap packet … |
| 1.3.6.1.4.1.2272.1.14.7.1.7 | ColumnrcBridgeUnknownMacDiscardDisablePort | read-write | current | This variable controls the 'disable-port' action that system will take when a MAC address violation event was detected. The value 'enable' means the specific p… |
| 1.3.6.1.4.1.2272.1.14.7.1.10 | ColumnrcBridgeUnknownMacDiscardMacCountMax | read-write | current | This variable represents the maxium number of MACc that can be added to some port. |
| 1.3.6.1.4.1.2272.1.14.7.1.11 | ColumnrcBridgeUnknownMacDiscardMacCountCur | read-only | current | This variable represents the current number of MACs that have been added to some port. |
| 1.3.6.1.4.1.2272.1.14.8 | TablercBridgeManualEditTable | not-accessible | current | This table is used to specify what MAC addresses can be learned on each port. |
| 1.3.6.1.4.1.2272.1.14.8.1 | RowrcBridgeManualEditEntry | not-accessible | current | A table containing information of MAC addresses that can be learned. |
| 1.3.6.1.4.1.2272.1.14.8.1.1 | ColumnrcBridgeManualEditAddress | read-only | current | This variable contains the source MAC address of an entry. |
| 1.3.6.1.4.1.2272.1.14.8.1.2 | ColumnrcBridgeManualEditPorts | read-write | current | This variable contains the allowed ports on which the MAC address of this entry can be learned. |
| 1.3.6.1.4.1.2272.1.14.8.1.3 | ColumnrcBridgeManualEditMonitor | read-write | current | This variable specifies the monitoring setting of the MAC address. The value 'true' means a copy of packet frame that send from or to the MAC address is forwar… |
| 1.3.6.1.4.1.2272.1.14.8.1.4 | ColumnrcBridgeManualEditPriority | read-write | current | This variable specifies the priority setting of the MAC address. The value 'low' means packet frames send from the MAC address is forwarded at low priority. Th… |
| 1.3.6.1.4.1.2272.1.14.8.1.5 | ColumnrcBridgeManualEditStatus | read-write | current | The variable controls the status of a MAC address in the table. The value 'active' is used to add the MAC address entry into the table. The value 'invalid' is … |
| 1.3.6.1.4.1.2272.1.14.9 | ScalarrcBridgeManualEditTblSize | read-only | current | Used to indicate the number of entries in the manual edit table. |
| 1.3.6.1.4.1.2272.1.14.10 | TablercBridgeAutoLearnTable | not-accessible | current | This table contains information of auto-learned MAC address when the 'unknow MAC discard' table's auto-learn is enabled. User must explicitly lock and save the… |
| 1.3.6.1.4.1.2272.1.14.10.1 | RowrcBridgeAutoLearnEntry | not-accessible | current | Entries in this table are created automatically when the user explicitly does a lock operation on the auto-learn-table (i.e., when 'AutoLearnTableMode' is set … |
| 1.3.6.1.4.1.2272.1.14.10.1.1 | ColumnrcBridgeAutoLearnAddress | read-only | current | This variable contains the source MAC address of the entries. |
| 1.3.6.1.4.1.2272.1.14.10.1.2 | ColumnrcBridgeAutoLearnPort | read-only | current | This variable contains the port where the MAC address was learned. |
| 1.3.6.1.4.1.2272.1.14.10.1.3 | ColumnrcBridgeAutoLearnMonitor | read-only | current | This variable contains the monitor setting of the MAC address. The value 'true' means a copy of packet frame that send from or to the MAC address is forwarded … |
| 1.3.6.1.4.1.2272.1.14.10.1.4 | ColumnrcBridgeAutoLearnPriority | read-only | current | This variable contains the priority setting of the MAC address. The value 'low' means packet frames send from the MAC address is forwarded at low priority. The… |
| 1.3.6.1.4.1.2272.1.14.10.1.5 | ColumnrcBridgeAutoLearnAction | read-write | current | This variable is for converting an auto-learned MAC address entry to a manual edit MAC address entry. This variable provides a mechanism for user to move a MAC… |
| 1.3.6.1.4.1.2272.1.14.11 | ScalarrcBridgeAutoLearnTblSize | read-only | current | Used to indicate the number of entries in the auto learn table. |
| 1.3.6.1.4.1.2272.1.14.13 | ScalarrcBridgeStaticMulticastTblSize | read-only | obsolete | Used to indicate the number of entries in the static multicast table. |
| 1.3.6.1.4.1.2272.1.14.14 | TablercRateLimitTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.14.14.1 | RowrcRateLimitEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.14.14.1.1 | ColumnrcRateLimitIfIndex | read-only | current | Port ifindex. |
| 1.3.6.1.4.1.2272.1.14.14.1.2 | ColumnrcRateLimitIfTrafficType | read-write | current | Type of traffic allowed. |
| 1.3.6.1.4.1.2272.1.14.14.1.4 | ColumnrcRateLimitIfEnable | read-write | current | Turn on/off rate limiting on this interface. |
| 1.3.6.1.4.1.2272.1.14.14.1.5 | ColumnrcRateLimitIfAllowedRatePps | read-write | current | Allowed traffic rate packets per second. 0 means disabled |
| 1.3.6.1.4.1.2272.1.14.15 | TablercBridgeStaticMcastTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.14.15.1 | RowrcBridgeStaticMcastEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.14.15.1.1 | ColumnrcBridgeStaticMcastVlanId | read-only | current | Vlan Id |
| 1.3.6.1.4.1.2272.1.14.15.1.2 | ColumnrcBridgeStaticMcastAddress | read-only | current | src mac addr. |
| 1.3.6.1.4.1.2272.1.14.15.1.3 | ColumnrcBridgeStaticMcastForwardingPorts | read-write | current | ports for forward this mac |
| 1.3.6.1.4.1.2272.1.14.15.1.4 | ColumnrcBridgeStaticMcastMltIds | read-write | current | list of mlts this mac will be forwarded on |
| 1.3.6.1.4.1.2272.1.14.15.1.5 | ColumnrcBridgeStaticMcastNumMltIds | read-only | current | number of mlts Ids |
| 1.3.6.1.4.1.2272.1.14.15.1.6 | ColumnrcBridgeStaticMcastRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.14.17 | TablercBridgeFdbProtectTable | not-accessible | current | This table gives information about the mac learning limits on a particular port. |
| 1.3.6.1.4.1.2272.1.14.17.1 | RowrcBridgeFdbProtectEntry | not-accessible | current | Information about a specific MAC address learning limits of a specific port. |
| 1.3.6.1.4.1.2272.1.14.17.1.1 | ColumnrcBridgeFdbProtectPortNum | read-only | current | This object is the interface on which MAC address learning limit is applied. |
| 1.3.6.1.4.1.2272.1.14.17.1.2 | ColumnrcBridgeFdbProtectMaxMacCount | read-write | current | Used to indicate maximum number of MAC address that can be learnt on the port. |
| 1.3.6.1.4.1.2272.1.14.17.1.3 | ColumnrcBridgeFdbProtectMinMacCount | read-write | current | Used to indicate minimum number of MAC address learnt which mac address learning will be re-enabled on the port. |
| 1.3.6.1.4.1.2272.1.14.17.1.4 | ColumnrcBridgeFdbProtectEnable | read-write | current | Used to enable or disable MAC learning limit feature on the port. |
| 1.3.6.1.4.1.2272.1.14.17.1.5 | ColumnrcBridgeFdbProtectCurrentMacCount | read-only | current | This object indicates the current number of MAC address learnt on the port. |
| 1.3.6.1.4.1.2272.1.14.17.1.6 | ColumnrcBridgeFdbProtectMacLearning | read-only | current | This object indicates whether the port can currrently learn new MAC addresses or not. |
| 1.3.6.1.4.1.2272.1.14.17.1.7 | ColumnrcBridgeFdbProtectViolationLogTrap | read-write | current | Used to enable or disable logging and sending of snmp trap, once MAC learning limit is reached for the port. |
| 1.3.6.1.4.1.2272.1.14.17.1.8 | ColumnrcBridgeFdbProtectViolationDownPort | read-write | current | Used to enable or disable the action of disabling the port, once MAC learning limit is reached for the port. |
| 1.3.6.1.4.1.2272.1.14.20 | TablercBridgeTpFdbTable | not-accessible | current | This table is an replacement to the standard dot1dTpFdbTable in rfc1493. |
| 1.3.6.1.4.1.2272.1.14.20.1 | RowrcBridgeTpFdbEntry | not-accessible | current | Information about a specific unicast MAC address for which the bridge has some forwarding information. |
| 1.3.6.1.4.1.2272.1.14.20.1.1 | ColumnrcBridgeTpFdbVlanId | not-accessible | current | Used to indicate the Vlan ID for this MAC address. |
| 1.3.6.1.4.1.2272.1.14.20.1.2 | ColumnrcBridgeTpFdbAddress | not-accessible | current | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2272.1.14.20.1.3 | ColumnrcBridgeTpFdbStatus | read-write | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.2272.1.14.20.1.4 | ColumnrcBridgeTpFdbPort | read-only | current | Either the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance of rcBridgeTpFdb… |
| 1.3.6.1.4.1.2272.1.14.20.1.5 | ColumnrcBridgeTpFdbSmltRemote | read-only | current | A MAC address indicate for remote learnt, either local or remote. |
| 1.3.6.1.4.1.2272.1.14.20.1.6 | ColumnrcBridgeTpFdbBMac | read-only | current | If the rcBridgeTpFdbEntry is learned from a SPBM network, instead of using port to track where the rcBridgeTpFdbAddress come from, the backbone MAC address is … |
| 1.3.6.1.4.1.2272.1.14.21 | TablercBridgeRemoteMacTable | not-accessible | current | This table is for PLSB cvlan UNI remote mac entries |
| 1.3.6.1.4.1.2272.1.14.21.1 | RowrcBridgeRemoteMacEntry | not-accessible | current | Information about a specific cvlan UNI remote MAC address for which the bridge has the forwarding information. |
| 1.3.6.1.4.1.2272.1.14.21.1.1 | ColumnrcBridgeRemoteMacVlanId | not-accessible | current | Used to indicate the Vlan ID for this MAC address. |
| 1.3.6.1.4.1.2272.1.14.21.1.2 | ColumnrcBridgeRemoteMacAddr | not-accessible | current | A customer MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2272.1.14.21.1.3 | ColumnrcBridgeRemoteMacStatus | read-only | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.2272.1.14.21.1.4 | ColumnrcBridgeRemoteMacDestAddr | read-only | current | A provider MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.2272.1.14.21.1.5 | ColumnrcBridgeRemoteMacPrimaryBVlanId | read-only | current | Used to indicate the BVlan ID for this MAC address. |
| 1.3.6.1.4.1.2272.1.14.21.1.6 | ColumnrcBridgeRemoteMacPrimaryDestSysName | read-only | current | Primary System name of the node where MAC address entry come from. |
| 1.3.6.1.4.1.2272.1.14.21.1.7 | ColumnrcBridgeRemoteMacPrimaryPort | read-only | current | Either the value '0', or the primary port on which a frame came from. |
| 1.3.6.1.4.1.2272.1.14.21.1.8 | ColumnrcBridgeRemoteMacSecondaryBVlanId | read-only | current | Used to indicate the BVlan ID for this MAC address. |
| 1.3.6.1.4.1.2272.1.14.21.1.9 | ColumnrcBridgeRemoteMacSecondaryDestSysName | read-only | current | Secondary System name of the node where MAC address entry come from. |
| 1.3.6.1.4.1.2272.1.14.21.1.10 | ColumnrcBridgeRemoteMacSecondaryPort | read-only | current | Either the value '0', or the secondary port on which a frame came from. |
| 1.3.6.1.4.1.2272.1.14.21.1.11 | ColumnrcBridgeRemoteMacSmltRemote | read-only | current | A MAC address indicate for remote learnt from ist peer |
| 1.3.6.1.4.1.2272.1.15 | NodercBoot | |||
| 1.3.6.1.4.1.2272.1.16 | NodercDevice | |||
| 1.3.6.1.4.1.2272.1.17 | NodercMlt | |||
| 1.3.6.1.4.1.2272.1.17.1 | ScalarrcMltNumMlts | read-only | current | The number of MLTs currently defined in the switch. |
| 1.3.6.1.4.1.2272.1.17.2 | ScalarrcMltPotentialMembers | read-only | current | The set of ports that are not members of any MLT. |
| 1.3.6.1.4.1.2272.1.17.3 | ScalarrcMltIstSessionEnable | read-write | current | Used to enable/disable mlt functionality. |
| 1.3.6.1.4.1.2272.1.17.4 | ScalarrcMltIstSessionStatus | read-only | current | Used to enable/disable mlt functionality. |
| 1.3.6.1.4.1.2272.1.17.5 | ScalarrcMltIstPeerIp | read-write | current | IST mlt Peer Ip address. |
| 1.3.6.1.4.1.2272.1.17.6 | ScalarrcMltIstVlanId | read-write | current | IST mlt Vlan Id. 0 is default when it is not set, VSP supports 0 to 4084 |
| 1.3.6.1.4.1.2272.1.17.10 | TablercMltTable | not-accessible | current | A list of Multi-Link Trunk entries. The number of entries is given by rcMltNumMlts. |
| 1.3.6.1.4.1.2272.1.17.10.1 | RowrcMltEntry | not-accessible | current | Entry containing configuration information for a particular Multi-Link Trunk. |
| 1.3.6.1.4.1.2272.1.17.10.1.1 | ColumnrcMltId | read-only | current | A value that uniquely identifies the Multi-Link Trunk associated with this entry. |
| 1.3.6.1.4.1.2272.1.17.10.1.2 | ColumnrcMltName | read-write | current | An administratively-assigned name for this MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.3 | ColumnrcMltPortMembers | read-write | current | The set of ports that are members of this MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.4 | ColumnrcMltPortType | read-write | current | The type of MLT port: access(1) or trunk(2). |
| 1.3.6.1.4.1.2272.1.17.10.1.5 | ColumnrcMltNumVlanIds | read-only | current | Used to indicate the number of VLAN IDs that are stored in the rcMltVlanIds variable. |
| 1.3.6.1.4.1.2272.1.17.10.1.7 | ColumnrcMltRowStatus | read-write | current | Used to create/delete entries in the rcMltTable. |
| 1.3.6.1.4.1.2272.1.17.10.1.8 | ColumnrcMltEnable | read-only | current | Enable the entry. |
| 1.3.6.1.4.1.2272.1.17.10.1.9 | ColumnrcMltLoadBalance | read-write | current | Perform load balance? |
| 1.3.6.1.4.1.2272.1.17.10.1.11 | ColumnrcMltIfIndex | read-only | current | Used to indicate the 'logical' ifIndex assigned to this MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.12 | ColumnrcMltMltType | read-write | current | MLT type. |
| 1.3.6.1.4.1.2272.1.17.10.1.14 | ColumnrcMltRunningType | read-only | current | Split MLT running type. |
| 1.3.6.1.4.1.2272.1.17.10.1.16 | ColumnrcMltMulticastDistribution | read-write | current | Enable/Disable multicast distribution per mlt. |
| 1.3.6.1.4.1.2272.1.17.10.1.18 | ColumnrcMltAggregatable | read-write | current | Enable/Disable link aggregation on a MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.19 | ColumnrcMltClearLinkAggregate | read-write | current | clear link aggregate, equivalent to disable and re-enable aggregatable on the MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.21 | ColumnrcMltDesignatedPort | read-only | current | Indicates the Designated port for the MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.22 | ColumnrcMltAggOperState | read-only | current | Link aggregation state on a MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.23 | ColumnrcMltAggTimeOfLastOperChange | read-only | current | The time value since the interface entered its current operational state. |
| 1.3.6.1.4.1.2272.1.17.10.1.39 | ColumnrcMltPeerPortMembers | read-only | current | The set of Peer ports which are connected to local ports (rcMltPortMember) of this MLT |
| 1.3.6.1.4.1.2272.1.17.10.1.40 | ColumnrcMltCpLimitPktRate | read-write | current | Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second. |
| 1.3.6.1.4.1.2272.1.17.10.1.41 | ColumnrcMltCpLimitShutDownEnable | read-write | current | Used to indicate if the mlt-ports should be shutdown when the CpLimitPktRate is exceeded. |
| 1.3.6.1.4.1.2272.1.17.10.1.42 | ColumnrcMltVlanIdList | read-write | current | This bitfield is used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a bit. The most-significant (left-most) bit represents Vla… |
| 1.3.6.1.4.1.2272.1.17.10.1.43 | ColumnrcMltEntryOwner | read-only | current | Defines the owner of the MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.44 | ColumnrcMltDatapathProgrammingState | read-only | current | Defines the datapath programming state of the MLT. |
| 1.3.6.1.4.1.2272.1.17.11 | NodercMltMcastDistribution | |||
| 1.3.6.1.4.1.2272.1.17.11.1 | ScalarrcMltMcastDistributionEnable | read-write | current | Used to enable/disable this feature to distribute multicast traffic on MLT ports. All the cards in the system must be E-Tickets. Cannot perform distribution in… |
| 1.3.6.1.4.1.2272.1.17.11.2 | ScalarrcMltMcastDistributionGrpMask | read-write | current | Group Mask. Create a MLT abstraction layer to distribute traffic basd on (source, group) information of the multicast packet. The algorithm to pick the actual … |
| 1.3.6.1.4.1.2272.1.17.11.3 | ScalarrcMltMcastDistributionSrcMask | read-write | current | Source Mask. |
| 1.3.6.1.4.1.2272.1.17.11.4 | ScalarrcMltMcastDistributionRedistributionEnable | read-write | current | Enable redistribution. |
| 1.3.6.1.4.1.2272.1.18 | NodercWeb | |||
| 1.3.6.1.4.1.2272.1.18.1 | ScalarrcWebEnableServer | read-write | current | Control whether the web server should be enabled. Setting this variable to true will make the server operational. Setting this variable to false will disable s… |
| 1.3.6.1.4.1.2272.1.18.2 | ScalarrcWebRWAUserName | read-write | current | User name for the read-write-all web-server account. |
| 1.3.6.1.4.1.2272.1.18.3 | ScalarrcWebRWAPassword | read-write | current | Password for the read-write-all web-server account. |
| 1.3.6.1.4.1.2272.1.18.4 | ScalarrcWebRWUserName | read-write | current | User name for the read-write web-server account. |
| 1.3.6.1.4.1.2272.1.18.5 | ScalarrcWebRWPassword | read-write | current | Password for the read-write web-server account. |
| 1.3.6.1.4.1.2272.1.18.6 | ScalarrcWebROUserName | read-write | current | User name for the read-only web-server account. |
| 1.3.6.1.4.1.2272.1.18.7 | ScalarrcWebROPassword | read-write | current | Password for the read-only web-server account. |
| 1.3.6.1.4.1.2272.1.18.8 | ScalarrcWebLastChange | read-only | current | Last web-browser initiated configuration change since sysUpTime. |
| 1.3.6.1.4.1.2272.1.18.9 | ScalarrcWebNumHits | read-only | current | Number of hits to the web-server |
| 1.3.6.1.4.1.2272.1.18.10 | ScalarrcWebNumAccessChecks | read-only | current | Number of access checks performed by the web-server |
| 1.3.6.1.4.1.2272.1.18.11 | ScalarrcWebNumAccessBlocks | read-only | current | Number of accesses blocked by the web-server |
| 1.3.6.1.4.1.2272.1.18.12 | ScalarrcWebNumRxErrors | read-only | current | Number of receive errors encountered by the web-server |
| 1.3.6.1.4.1.2272.1.18.13 | ScalarrcWebNumTxErrors | read-only | current | Number of transmit errors encountered by the web-server |
| 1.3.6.1.4.1.2272.1.18.14 | ScalarrcWebNumSetRequest | read-only | current | Number of set-request to the web-server |
| 1.3.6.1.4.1.2272.1.18.15 | ScalarrcWebPrimaryHtmlSourceDir | read-write | current | primary html source directory |
| 1.3.6.1.4.1.2272.1.18.16 | ScalarrcWebSecondaryHtmlSourceDir | read-write | current | secondary html source directory |
| 1.3.6.1.4.1.2272.1.18.17 | ScalarrcWebTertiaryHtmlSourceDir | read-write | current | tertiary html source directory |
| 1.3.6.1.4.1.2272.1.18.18 | ScalarrcWebRWL3UserName | read-write | current | user name for the L3 web server account |
| 1.3.6.1.4.1.2272.1.18.19 | ScalarrcWebRWL3Password | read-write | current | password for the L3 web server account |
| 1.3.6.1.4.1.2272.1.18.20 | ScalarrcWebRWL2UserName | read-write | current | user name for the L2 web server account |
| 1.3.6.1.4.1.2272.1.18.21 | ScalarrcWebRWL2Password | read-write | current | password for the L2 web server account |
| 1.3.6.1.4.1.2272.1.18.22 | ScalarrcWebDefaultDisplayRows | read-write | current | default display rows in html page. |
| 1.3.6.1.4.1.2272.1.18.23 | ScalarrcWebLastHostAccessBlocked | read-only | current | last host access blocked |
| 1.3.6.1.4.1.2272.1.18.24 | ScalarrcWebHelpTftpSourceDir | read-write | current | tftp source directory for help files |
| 1.3.6.1.4.1.2272.1.18.25 | ScalarrcWebHttpPort | read-write | current | the HTTP port for web access |
| 1.3.6.1.4.1.2272.1.18.26 | ScalarrcWebSecureOnly | read-write | current | Control whether the secure only should be enabled. Setting this variable to true will make the server support HTTPS only. Setting this variable to false will m… |
| 1.3.6.1.4.1.2272.1.18.27 | ScalarrcWebHttpsPort | read-write | current | the HTTPs port for web access |
| 1.3.6.1.4.1.2272.1.19 | NodercCli | |||
| 1.3.6.1.4.1.2272.1.19.1 | ScalarrcCliRWAUserName | read-write | current | User name for the read-write-all CLI account. |
| 1.3.6.1.4.1.2272.1.19.2 | ScalarrcCliRWAPassword | read-write | current | Password for the read-write-all CLI account. |
| 1.3.6.1.4.1.2272.1.19.3 | ScalarrcCliRWUserName | read-write | current | User name for the read-write CLI account. |
| 1.3.6.1.4.1.2272.1.19.4 | ScalarrcCliRWPassword | read-write | current | Password for the read-write CLI account. |
| 1.3.6.1.4.1.2272.1.19.5 | ScalarrcCliRWL3UserName | read-write | current | User name for the read-write layer-3 CLI account. |
| 1.3.6.1.4.1.2272.1.19.6 | ScalarrcCliRWL3Password | read-write | current | Password for the read-write layer-3 CLI account. |
| 1.3.6.1.4.1.2272.1.19.7 | ScalarrcCliRWL2UserName | read-write | current | User name for the read-write layer-2 CLI account. |
| 1.3.6.1.4.1.2272.1.19.8 | ScalarrcCliRWL2Password | read-write | current | Password for the read-write layer-2 CLI account. |
| 1.3.6.1.4.1.2272.1.19.9 | ScalarrcCliROUserName | read-write | current | User name for the read-only CLI account. |
| 1.3.6.1.4.1.2272.1.19.10 | ScalarrcCliROPassword | read-write | current | Password for the read-only CLI account. |
| 1.3.6.1.4.1.2272.1.19.11 | ScalarrcCliMaxTelnetSessions | read-write | current | Used to indicate the maximum number of telnet sessions the system will support. |
| 1.3.6.1.4.1.2272.1.19.12 | ScalarrcCliMaxRloginSessions | read-write | current | Used to indicate the maximum number of rlogin sessions the system will support. |
| 1.3.6.1.4.1.2272.1.19.13 | ScalarrcCliTimeout | read-write | current | Used to indicate the amount of idle time, in seconds to wait before timing out telnet and rlogin sessions. |
| 1.3.6.1.4.1.2272.1.19.14 | ScalarrcCliNumAccessViolations | read-only | current | Used to indicate the number of CLI access violations detected by the system. |
| 1.3.6.1.4.1.2272.1.19.15 | ScalarrcCliRWL1UserName | read-write | current | User name for the read-write layer-1 CLI account. |
| 1.3.6.1.4.1.2272.1.19.16 | ScalarrcCliRWL1Password | read-write | current | Password for the read-write layer-1 CLI account. |
| 1.3.6.1.4.1.2272.1.19.17 | ScalarrcCliPasswordChange | read-only | current | Used to indication which password is changed when sending a rcCliPasswordChange trap. |
| 1.3.6.1.4.1.2272.1.19.18 | ScalarrcCliPassChangeResult | read-only | current | Used to indication the result of changing password when sending a rcPasswordChange trap. |
| 1.3.6.1.4.1.2272.1.19.19 | ScalarrcCliRWEnable | read-write | current | Enable/Disable for the read-write CLI account. |
| 1.3.6.1.4.1.2272.1.19.20 | ScalarrcCliRWL1Enable | read-write | current | Enable/Disable for the read-write-layer1 CLI account. |
| 1.3.6.1.4.1.2272.1.19.21 | ScalarrcCliRWL2Enable | read-write | current | Enable/Disable for the read-write-layer2 CLI account. |
| 1.3.6.1.4.1.2272.1.19.22 | ScalarrcCliRWL3Enable | read-write | current | Enable/Disable for the read-write-layer3 CLI account. |
| 1.3.6.1.4.1.2272.1.19.23 | ScalarrcCliROEnable | read-write | current | Enable/Disable for the read-only CLI account. |
| 1.3.6.1.4.1.2272.1.20 | NodercError | |||
| 1.3.6.1.4.1.2272.1.20.1 | ScalarrcErrorLevel | read-only | current | Error level indicator for the last error reported in the system. The meaning of this value are : 0 = Informative Information 1 = Warning Condition 2 = Error Co… |
| 1.3.6.1.4.1.2272.1.20.2 | ScalarrcErrorCode | read-only | current | Error code indicator for the last error reported in the system. This is an encoded value that identifies the software module that generated the error message a… |
| 1.3.6.1.4.1.2272.1.20.3 | ScalarrcErrorText | read-only | current | Error string of the last error reported in the system. |
| 1.3.6.1.4.1.2272.1.20.4 | ScalarrcErrorReturnCode | read-only | current | This variable is used primarily as an enumeration to list the proprietary return codes that this device can send to a management station in response to a faile… |
| 1.3.6.1.4.1.2272.1.20.5 | ScalarrcErrorSendTrap | read-write | current | Indicates whether to send trap upon receiving an error in the system. |
| 1.3.6.1.4.1.2272.1.21 | NodercTraps | |||
| 1.3.6.1.4.1.2272.1.21.0 | NodercTrapsMib | |||
| 1.3.6.1.4.1.2272.1.21.0.1 | NotificationrcnCardDown | current | A rcnCardDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to tr… | |
| 1.3.6.1.4.1.2272.1.21.0.2 | NotificationrcnCardUp | current | A rcnCardUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to tran… | |
| 1.3.6.1.4.1.2272.1.21.0.3 | NotificationrcnErrorNotification | current | A rcnErrorNotification trap signifies that the SNMPv2 entity, acting in an agent role, has detected that an error condition has occured. | |
| 1.3.6.1.4.1.2272.1.21.0.4 | NotificationrcnStpNewRoot | current | A rcnStpNewRoot trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Spanning Tree Protocol has declared the device to be the new r… | |
| 1.3.6.1.4.1.2272.1.21.0.5 | NotificationrcnStpTopologyChange | current | A rcnStpTopologyChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Spanning Tree Protocol has gone due a topology change e… | |
| 1.3.6.1.4.1.2272.1.21.0.6 | NotificationrcnChasPowerSupplyDown | current | A rcnChasPowerSupplyDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasPowerSupplyOperStatus object for one of it… | |
| 1.3.6.1.4.1.2272.1.21.0.7 | NotificationrcnChasFanDown | current | A rcnChasFanDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasFanOperStatus object for one of its power supply u… | |
| 1.3.6.1.4.1.2272.1.21.0.8 | NotificationrcnLinkOscillation | current | A rcnLinkOscillation trap signifies that the SNMPv2 entity, acting in an agent role, has detected an excessive number of link state transitions on the specifie… | |
| 1.3.6.1.4.1.2272.1.21.0.9 | NotificationrcnMacViolation | current | A rcnMacViolation trap signifies that the SNMPv2 entity, acting in an agent role, has received a PDU with an invalid source MAC address. | |
| 1.3.6.1.4.1.2272.1.21.0.10 | NotificationrcnSonetTrap | current | A rcnSonetTrap trap signifies that the SNMPv2 entity, acting in an agent role, has detected a change of status on a Sonet port. | |
| 1.3.6.1.4.1.2272.1.21.0.11 | Notificationrcn2kCardDown | current | A rcnCardDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to tr… | |
| 1.3.6.1.4.1.2272.1.21.0.12 | Notificationrcn2kCardUp | current | A rcnCardUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcCardOperStatus object for one of its cards is about to tran… | |
| 1.3.6.1.4.1.2272.1.21.0.13 | Notificationrcn2kTemperature | current | A rcn2kTemperature trap signifies that the SNMPv2 entity, acting in an agent role, has detected the chassis is over-heating. | |
| 1.3.6.1.4.1.2272.1.21.0.14 | NotificationrcnChasPowerSupplyUp | current | A rcnChasPowerSupplyUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasPowerSupplyOperStatus object for one of its … | |
| 1.3.6.1.4.1.2272.1.21.0.15 | Notificationrcn2kAtmPvcLinkStateChange | current | A rcn2kAtmPvcLinkStateChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rc2kAtmPvcOamVcStatus object for one of PVC … | |
| 1.3.6.1.4.1.2272.1.21.0.16 | NotificationrcnStpTCN | current | A rcnStpTopologyChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Spanning Tree Protocol has gone due a topology change e… | |
| 1.3.6.1.4.1.2272.1.21.0.17 | NotificationrcnSmltIstLinkUp | current | A rcnSmltIstLinkUp trap signifies that the split MLT link is from down to up. | |
| 1.3.6.1.4.1.2272.1.21.0.18 | NotificationrcnSmltIstLinkDown | current | A rcnSmltIstLinkDown trap signifies that the split MLT link is from up to down. | |
| 1.3.6.1.4.1.2272.1.21.0.19 | NotificationrcnSmltLinkUp | current | A rcnMltSmltId trap signifies that the split SMLT link is up. | |
| 1.3.6.1.4.1.2272.1.21.0.20 | NotificationrcnSmltLinkDown | current | A rcMltSmltId trap signifies that the split SMLT link is down. | |
| 1.3.6.1.4.1.2272.1.21.0.21 | NotificationrcnChasFanUp | current | A rcnChasFanUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the rcChasFanOperStatus object for one of its power supply uni… | |
| 1.3.6.1.4.1.2272.1.21.0.22 | NotificationrcnPasswordChange | current | A rcnPasswordChange trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the one of the cli password is changed. | |
| 1.3.6.1.4.1.2272.1.21.0.23 | NotificationrcnEmError | current | A rcnEmError trap signifies that the SNMPv2 entity, acting in an agent role, has detected Em error. | |
| 1.3.6.1.4.1.2272.1.21.0.25 | NotificationrcnPcmciaCardRemoved | current | A rcnPcmciaRemoved trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the PCMCIA card is being removed. | |
| 1.3.6.1.4.1.2272.1.21.0.26 | NotificationrcnSmartCpldTimerFired | current | A rcnSmartCpldTimerFired trap signifies that the cpld timer fired. | |
| 1.3.6.1.4.1.2272.1.21.0.27 | NotificationrcnCardCpldNotUpDate | current | A rcnCardCpldNotUpDate trap signifies that the cpld is not up to date. | |
| 1.3.6.1.4.1.2272.1.21.0.28 | NotificationrcnIgapLogFileFull | current | A rcnIgapLogFileFull trap signifies that the Igap accounting time-out Log File reach the maximum. | |
| 1.3.6.1.4.1.2272.1.21.0.29 | NotificationrcnCpLimitShutDown | current | A rcnCpLimitShutDown trap signifies that the cp limit for the port is shutting down. | |
| 1.3.6.1.4.1.2272.1.21.0.30 | NotificationrcnSshServerEnabled | current | A rcnSshServerEnabled trap signifies that the SSH server is enabled. | |
| 1.3.6.1.4.1.2272.1.21.0.31 | NotificationrcnSshServerDisabled | current | A rcnSshServerDisabled trap signifies that the SSH server is disabled. | |
| 1.3.6.1.4.1.2272.1.21.0.32 | NotificationrcnSshSessionLogin | deprecated | A rcnSshSessionLogin trap signifies that there is a SSH session login. It's deprecated by rcnaSshSessionLogin. | |
| 1.3.6.1.4.1.2272.1.21.0.33 | NotificationrcnSshSessionLogout | deprecated | A rcnSshSessionLogout trap signifies that there is a SSH session logout. It's deprecated by rcnaSshSessionLogout. | |
| 1.3.6.1.4.1.2272.1.21.0.34 | NotificationrcnSshUnauthorizedAccess | deprecated | A rcnSshUnauthorizedAccess trap signifies that an unauthorized access has occured. It's deprecated by rcnaSshUnauthorizedAccess. | |
| 1.3.6.1.4.1.2272.1.21.0.35 | NotificationrcnHaCpuState | current | A rcnHaCpuState trap signifies that the state of the HA-CPU. | |
| 1.3.6.1.4.1.2272.1.21.0.36 | NotificationrcnInsufficientMemory | current | A rcnInsufficientMemory trap indicates insufficient memory on CPU blade for proper operation. Recommended memory = 256 MB available through Nortel Networks upg… | |
| 1.3.6.1.4.1.2272.1.21.0.37 | NotificationrcnSaveConfigAction | current | A rcnSaveConfigAction trap indicates the switch run time or boot configuration is being saved | |
| 1.3.6.1.4.1.2272.1.21.0.38 | NotificationrcnLoopDetectOnPort | current | A rcnLoopDetectOnPort trap indicates that a loop has been detected on a port. The vlan on that port will be disabled. | |
| 1.3.6.1.4.1.2272.1.21.0.39 | NotificationrcnbgpEstablished | current | The BGP Established event is generated when the BGP FSM enters the ESTABLISHED state. | |
| 1.3.6.1.4.1.2272.1.21.0.40 | NotificationrcnbgpBackwardTransition | current | The BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state. | |
| 1.3.6.1.4.1.2272.1.21.0.41 | NotificationrcnAggLinkUp | current | A rcnAggLinkUp trap is generated when the operational state of the aggregator changes from down to up. | |
| 1.3.6.1.4.1.2272.1.21.0.42 | NotificationrcnAggLinkDown | current | A rcnAggLinkDown trap is generated when the operational state of the aggregator changes from up to down. | |
| 1.3.6.1.4.1.2272.1.21.0.43 | NotificationrcnIgmpNewGroupMember | current | An IgmpNewGroupMember trap signifies that a new member has come on an interface. | |
| 1.3.6.1.4.1.2272.1.21.0.44 | NotificationrcnIgmpLossGroupMember | current | An IgmpLossGroupMember trap signifies that a group member has been lost on an interface. | |
| 1.3.6.1.4.1.2272.1.21.0.45 | NotificationrcnIgmpNewQuerier | current | An igmpNewQuerier trap signifies that a new querier has come up on an interface. | |
| 1.3.6.1.4.1.2272.1.21.0.46 | NotificationrcnIgmpQuerierChange | current | An rcnIgmpQuerierChange trap signifies that the querier has changed. | |
| 1.3.6.1.4.1.2272.1.21.0.47 | NotificationrcnDvmrpIfStateChange | current | A rcnDvmrpIfStateChange trap signifies that there has been a change in the state of a DVMRP interface. | |
| 1.3.6.1.4.1.2272.1.21.0.48 | NotificationrcnDvmrpNewNbrChange | current | A rcnDvmrpNewNbrChange trap signifies that a new neighbor has come up on a DVMRP interface. | |
| 1.3.6.1.4.1.2272.1.21.0.49 | NotificationrcnDvmrpNbrLossChange | current | A rcnDvmrpNbrLossChange trap signifies that a new neighbor has gone down on a DVMRP interface. | |
| 1.3.6.1.4.1.2272.1.21.0.59 | NotificationrcnFdbProtectViolation | current | The rcnFdbProtectViolation trap signifies that the has violated the user configured limit for total number of fdb-entries learned on that port. | |
| 1.3.6.1.4.1.2272.1.21.0.60 | NotificationrcnLogMsgControl | current | A rcnLogMsgControl trap signifies whether the number of times of repeatation of the particular Log message has exceeded the particular frequency/count or not. | |
| 1.3.6.1.4.1.2272.1.21.0.61 | NotificationrcnSaveConfigFile | current | A rcnSaveConfig trap signifies that either the runtime config or the boot config has been saved on the switch | |
| 1.3.6.1.4.1.2272.1.21.0.62 | NotificationrcnDNSRequestResponse | current | A rcnDnsRequestResponse trap signifies that the switch had sent a query to the DNS server or it had received a successful response from the DNS Server | |
| 1.3.6.1.4.1.2272.1.21.0.63 | NotificationrcnDuplicateIpAddress | current | A rcnDuplicateIpAddress trap signifies that a duplicate IP address is detected on the subnet. | |
| 1.3.6.1.4.1.2272.1.21.0.64 | NotificationrcnLoopDetectPortDown | current | A rcnLoopDetectPortDown trap signifies that a loop has been detected on a port and the port is going to shut down. | |
| 1.3.6.1.4.1.2272.1.21.0.67 | NotificationrcnLoopDetectMacDiscard | current | A rcnLoopDetectMacDiscard trap signifies that a loop has been Detected on a port and the mac address will be discarded on all ports in that vlan | |
| 1.3.6.1.4.1.2272.1.21.0.68 | NotificationrcnAutoRecoverPort | current | A rcnAutoRecoverPort trap signifies that autorecover has re-enabled a port disabled by link flap or cp limit | |
| 1.3.6.1.4.1.2272.1.21.0.69 | NotificationrcnAutoRecoverLoopDetectedPort | current | A rcnAutoRecoverPort trap signifies that autorecover has cleared the action taken on a port by loop detect | |
| 1.3.6.1.4.1.2272.1.21.0.70 | NotificationrcnExtCpLimitShutDown | current | A rcnExtCpLimitShutDown trap signifies that port is shut down due to Extended CP-Limit. | |
| 1.3.6.1.4.1.2272.1.21.0.71 | NotificationrcnExtCpLimitSopCongestion | current | A rcnExtCpLimitSopCongestion signifies that system octapid polling finds that system octapid is congested or not. rcSysExtCplimitSysOctapidCongested signifies … | |
| 1.3.6.1.4.1.2272.1.21.0.74 | NotificationrcnTacacsAuthFailure | current | TACACS+ authentication failed for user | |
| 1.3.6.1.4.1.2272.1.21.0.75 | NotificationrcnTacacsNoServers | current | Unable to use any TACACS+ servers for authentication | |
| 1.3.6.1.4.1.2272.1.21.0.76 | NotificationrcnTacacsRxUnsupportedFrame | current | Received unsupported frame from TACACS+ server | |
| 1.3.6.1.4.1.2272.1.21.0.77 | NotificationrcnTacacsExceededMaxLogins | current | Attempted to exceed the maximum number of allowed TACACS+ logins | |
| 1.3.6.1.4.1.2272.1.21.0.78 | NotificationrcnTacacsClientFailure | current | TACACS+ Client application is down | |
| 1.3.6.1.4.1.2272.1.21.0.80 | NotificationrcnVlacpPortDown | current | A rcnVlacpPortDown trap signifies that Vlacp is down on the port specified. | |
| 1.3.6.1.4.1.2272.1.21.0.81 | NotificationrcnVlacpPortUp | current | A rcnVlacpPortUp trap signifies that Vlacp is Up on the port specified. | |
| 1.3.6.1.4.1.2272.1.21.0.82 | NotificationrcnExtCpLimitShutDownNormal | current | An rcnExtCpLimitShutDownNormal trap signifies that Ports are shut down due to Extended CP-Limit in Normal mode. | |
| 1.3.6.1.4.1.2272.1.21.0.83 | NotificationrcnEapMacIntrusion | current | A rcnEapMacIntrusion trap signifies that an EAP MAC intrusion has occured on this Port. | |
| 1.3.6.1.4.1.2272.1.21.0.84 | NotificationrcnInterCpuCommStatus | current | A rcnInterCpuCommStatus trap signifies the current communication status between primary and secondary CPU. | |
| 1.3.6.1.4.1.2272.1.21.0.89 | NotificationrcPlugOptModTemperatureStatusTrap | current | Used to trap changes in the temperature status | |
| 1.3.6.1.4.1.2272.1.21.0.90 | NotificationrcPlugOptModVoltageStatusTrap | current | Used to trap changes in the voltage level | |
| 1.3.6.1.4.1.2272.1.21.0.91 | NotificationrcPlugOptModBiasStatusTrap | current | Used to trap changes in the laser bias status | |
| 1.3.6.1.4.1.2272.1.21.0.92 | NotificationrcPlugOptModTxPowerStatusTrap | current | Used to trap changes in the transmit power status | |
| 1.3.6.1.4.1.2272.1.21.0.93 | NotificationrcPlugOptModRxPowerStatusTrap | current | Used to trap changes in the received power status | |
| 1.3.6.1.4.1.2272.1.21.0.94 | NotificationrcPlugOptModAux1StatusTrap | current | Used to trap changes in the Aux1 status | |
| 1.3.6.1.4.1.2272.1.21.0.95 | NotificationrcPlugOptModAux2StatusTrap | current | Used to trap changes in the Aux2 status | |
| 1.3.6.1.4.1.2272.1.21.0.110 | NotificationrcnMaxRouteWarnClear | current | A rcnMaxRouteWarnClear trap signifies that the number of routes in the routing table of the Virtual Router has droped below its warning threshold. | |
| 1.3.6.1.4.1.2272.1.21.0.111 | NotificationrcnMaxRouteWarnSet | current | A rcnMaxRouteWarnSet trap signifies that the given Virtual Routers routing table is reaching its maximum size. Action should be taken to prevent this | |
| 1.3.6.1.4.1.2272.1.21.0.112 | NotificationrcnMaxRouteDropClear | current | A rcnMaxRouteDropClear signifies that the given Virtual Routers routing table is no longer dropping new routes as it is below its maximum size. | |
| 1.3.6.1.4.1.2272.1.21.0.113 | NotificationrcnMaxRouteDropSet | current | A rcnMaxRouteDropSet trap signifies that the given Virtual Routers routing table has reached its maximum size, and is now dropping all new non static routes. | |
| 1.3.6.1.4.1.2272.1.21.0.117 | NotificationrcnMstpNewCistRoot | current | A rcnMstpNewCistRoot trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Multiple Spanning Tree Protocol has declared the device t… | |
| 1.3.6.1.4.1.2272.1.21.0.118 | NotificationrcnMstpNewMstiRoot | current | A rcnMstpNewMstiRoot signifies that the SNMPv2 entity, acting in an agent role, has detected the Multiple Spanning Tree Protocol has declared the device to be … | |
| 1.3.6.1.4.1.2272.1.21.0.119 | NotificationrcnMstpNewCistRegionalRoot | current | A rcnMstpNewCistRegionalRoot trap signifies that the SNMPv2 entity, acting in an agent role, has detected the Multiple Spanning Tree Protocol has declared the … | |
| 1.3.6.1.4.1.2272.1.21.0.120 | NotificationrcnRstpNewRoot | current | A rcnRstpNewRoot signifies that the SNMPv2 entity, acting in an agent role, has detected the Rapid Spanning Tree Protocol has declared the device to be the new… | |
| 1.3.6.1.4.1.2272.1.21.0.124 | NotificationrcnRsmltEdgePeerModified | current | A rcnRsmltEdgePeerModified signifies that the RSMLT Peer address is different from that of the stored address. Save config is necessary if EdgeSupport has to u… | |
| 1.3.6.1.4.1.2272.1.21.0.165 | NotificationrcnTmuxParityError | current | A rcnTmuxParityError trap identifies a problem in the FAD /SWIP based on the number of parity errors. | |
| 1.3.6.1.4.1.2272.1.21.0.167 | NotificationrcnChasPowerSupplyNoRedundancy | current | A rcnChasPowerSupplyNoRedundancy signifies that the chassis is running on power supply without redundancy. | |
| 1.3.6.1.4.1.2272.1.21.0.168 | NotificationrcnChasPowerSupplyRedundancy | current | A rcnChasPowerSupplyRedundancy signifies that the chassis is running on power supply with redundancy. | |
| 1.3.6.1.4.1.2272.1.21.0.171 | NotificationrcnLicenseTrialPeriodExpired | current | A rcnLicenseTrialPeriodExpired signifies that Trial Period License has expired. | |
| 1.3.6.1.4.1.2272.1.21.0.172 | NotificationrcnLicenseTrialPeriodExpiry | current | A rcnLicenseTrialPeriodExpiry signifies the time remaining before License Trial Period expires in days. | |
| 1.3.6.1.4.1.2272.1.21.0.173 | NotificationrcnVrfUp | current | This notification is generated when the specified VRF's operational status is toggled from down to up. | |
| 1.3.6.1.4.1.2272.1.21.0.174 | NotificationrcnVrfDown | current | This notification is generated when the specified VRF's operational status is toggled from up to down. | |
| 1.3.6.1.4.1.2272.1.21.0.175 | NotificationrcnMrouteIngressThresholdExceeded | current | This notification is generated when the number of mroute ingress records exceeds the ingress threshold. | |
| 1.3.6.1.4.1.2272.1.21.0.176 | NotificationrcnMrouteEgressThresholdExceeded | current | This notification is generated when the number of mroute egress records exceeds the egress threshold. | |
| 1.3.6.1.4.1.2272.1.21.0.177 | NotificationrcnRemoteMirroringStatus | current | A rcnRemoteMirroringStatus trap signifies whether the remote mirroring is enabled or disabled on a particular port | |
| 1.3.6.1.4.1.2272.1.21.0.185 | NotificationrcnChasPowerSupplyRunningLow | current | A rcnChasPowerSupplyRunningLow signifies that the chassis is running on low power supply. | |
| 1.3.6.1.4.1.2272.1.21.0.192 | NotificationrcnIsisPlsbMetricMismatchTrap | current | A PLSB ISIS trap signifies that a LSP with a different value of l1-metric is received | |
| 1.3.6.1.4.1.2272.1.21.0.193 | NotificationrcnIsisPlsbDuplicateSysidTrap | current | A PLSB ISIS trap signifies that a Hello packet with a duplicate system-id is received | |
| 1.3.6.1.4.1.2272.1.21.0.194 | NotificationrcnIsisPlsbLsdbUpdateTrap | current | A PLSB ISIS trap signifies that LSDB information has changed | |
| 1.3.6.1.4.1.2272.1.21.0.196 | NotificationrcnChasFanCoolingLow | current | A rcnChasFanCoolingLow signifies that the chassis is running on low fan cooling. | |
| 1.3.6.1.4.1.2272.1.21.0.268 | NotificationrcnAuthenticationSuccess | deprecated | A rcnAuthenticationSuccess trap signifies that a login is success. Trap includes login username and host ip. It's deprecated by rcnaAuthenticationSuccess. | |
| 1.3.6.1.4.1.2272.1.21.0.269 | NotificationrcnCardInsert | current | A rcnCardInsert trap signifies that a card/module is inserted into the chassis | |
| 1.3.6.1.4.1.2272.1.21.0.270 | NotificationrcnCardRemove | current | A rcnCardRemove trap signifies that a card/module is removed from the chassis | |
| 1.3.6.1.4.1.2272.1.21.0.271 | NotificationrcnChasFanFail | current | A rcnChasFanFail trap indicates that a fan unit of a fan tray in a fan zone has fault. | |
| 1.3.6.1.4.1.2272.1.21.0.272 | NotificationrcnChasFanOk | current | A rcnChasFanOk trap indicates that a fan unit of a fan tray in a fan zone has recovered from previously detected fan fault. | |
| 1.3.6.1.4.1.2272.1.21.0.273 | NotificationrcnCardOverheat | current | A rcnCardOverheat trap indicates that a card temperature has exceeded the alarm threshold temperature. | |
| 1.3.6.1.4.1.2272.1.21.0.274 | NotificationrcnCardNormalTemp | current | A rcnCardNormalTemp trap indicates that a card temperature has been cool down from previously detected overheat condition. | |
| 1.3.6.1.4.1.2272.1.21.0.275 | NotificationrcnCardOverheatShutDown | current | A rcnCardOverheatShutDown trap indicates that a card has been shut down due to persistent temperature overheat for 15 minutes or temperature has exceeded the s… | |
| 1.3.6.1.4.1.2272.1.21.0.276 | NotificationrcnCardCpuUtilizationHigh | current | A rcnCardCpuUtilizationHigh trap indicates that 5-minute CPU utilization average on this slot is above 90%. | |
| 1.3.6.1.4.1.2272.1.21.0.277 | NotificationrcnCardCpuUtilizationNormal | current | A rcnCardCpuUtilizationNormal trap indicates that 5-minute CPU utilization average on this slot is below 75%. | |
| 1.3.6.1.4.1.2272.1.21.0.278 | NotificationrcnIsisPlsbBvidMismatchTrap | current | A PLSB ISIS trap signifies that a Hello packet with mismatched B-VIDs is received | |
| 1.3.6.1.4.1.2272.1.21.0.279 | NotificationrcnIsisPlsbSmltVirtBmacMismatchTrap | current | A PLSB ISIS trap signifies that Virtual BMAC configured in the switch is different from virtual BMAC configured in the IST peer | |
| 1.3.6.1.4.1.2272.1.21.0.280 | NotificationrcnIsisPlsbSmltPeerBmacMismatchTrap | current | A PLSB ISIS trap signifies that either the Smlt Peer BMAC configured in the IST peer is different from the ISIS SystemId of the local switch OR The Smlt peer B… | |
| 1.3.6.1.4.1.2272.1.21.0.281 | NotificationrcnIsisPlsbAdjStateTrap | current | A PLSB ISIS trap signifies ISIS adjacency state change. | |
| 1.3.6.1.4.1.2272.1.21.0.282 | NotificationrcnIsisPlsbDuplicateNnameTrap | current | A PLSB ISIS trap signifies that a LSP with duplicate nickname is received, this trap should be generated by all the switches in the network. | |
| 1.3.6.1.4.1.2272.1.21.0.283 | NotificationrcnIsisPlsbSmltSplitBebMismatchTrap | current | A PLSB ISIS trap signifies that the Smlt Split-Beb configured in the local switch and IST peer are same. One IST switch shoule be configured as Split-Beb prima… | |
| 1.3.6.1.4.1.2272.1.21.0.284 | NotificationrcnIsisPlsbMultiLinkAdjTrap | current | A PLSB ISIS trap signifies that multiple ISIS adjacencies are formed with the same ISIS node. | |
| 1.3.6.1.4.1.2272.1.21.0.285 | NotificationrcnaSshSessionLogout | current | A rcnaSshSessionLogout trap signifies that there is a SSH session logout. This trap deprecates the rcnSshSessionLogout trap. | |
| 1.3.6.1.4.1.2272.1.21.0.286 | NotificationrcnaSshUnauthorizedAccess | current | A rcnaSshUnauthorizedAccess trap signifies that an unauthorized access has occured. This trap deprecates the rcnSshUnauthorizedAccess trap. | |
| 1.3.6.1.4.1.2272.1.21.0.287 | NotificationrcnaAuthenticationSuccess | current | A rcnaAuthenticationSuccess trap signifies that a login is success. Trap includes login username and address type and inet address. This trap deprecates the rc… | |
| 1.3.6.1.4.1.2272.1.21.0.288 | NotificationrcnaSshSessionLogin | current | A rcnaSshSessionLogin trap signifies that there is a SSH session login. This trap deprecates the rcnSshSessionLogin trap. | |
| 1.3.6.1.4.1.2272.1.22 | NodercSyslog | |||
| 1.3.6.1.4.1.2272.1.22.1 | NodercSyslogGlobal | |||
| 1.3.6.1.4.1.2272.1.22.1.1 | ScalarrcSyslogGlobalEnable | read-write | current | Used to enable/disable the SysLog feature. When enabled this feature will send a message to a server on a network that this configured to receive and store dia… |
| 1.3.6.1.4.1.2272.1.22.1.2 | ScalarrcSyslogGlobalMaxHosts | read-write | current | Maximun number of remote hosts considered 'active' and able to receive messages from the Syslog service on the router. |
| 1.3.6.1.4.1.2272.1.22.1.3 | ScalarrcSyslogGlobalOperState | read-only | current | The operational state of the syslog service on the router. |
| 1.3.6.1.4.1.2272.1.22.1.4 | ScalarrcSyslogGlobalHeader | read-write | current | The IP Header Type for the Syslog Packet. |
| 1.3.6.1.4.1.2272.1.22.2 | TablercSyslogHostTbl | not-accessible | current | Table of remote host destinations for syslog. |
| 1.3.6.1.4.1.2272.1.22.2.1 | RowrcSyslogHostEntry | not-accessible | current | Entry containing information for a particular entry in rcSyslogHostTable. |
| 1.3.6.1.4.1.2272.1.22.2.1.1 | ColumnrcSyslogHostId | read-only | current | Host Id. |
| 1.3.6.1.4.1.2272.1.22.2.1.2 | ColumnrcSyslogHostIpAddr | read-write | deprecated | Host Ip Address |
| 1.3.6.1.4.1.2272.1.22.2.1.3 | ColumnrcSyslogHostUdpPort | read-write | current | Specifies the UDP port to use to send syslog messages to the host. |
| 1.3.6.1.4.1.2272.1.22.2.1.4 | ColumnrcSyslogHostFacility | read-write | current | Specifies the UNIX facility used in messages to the syslog host. Default is LOCAL7. |
| 1.3.6.1.4.1.2272.1.22.2.1.5 | ColumnrcSyslogHostModuleId | read-write | current | Specifies for which modules/tasks syslog messages should be sent. Default is all modules/tasks. |
| 1.3.6.1.4.1.2272.1.22.2.1.6 | ColumnrcSyslogHostModuleId2 | read-write | current | Specifies for which modules/tasks syslog messages should be sent. Default is all modules/tasks. |
| 1.3.6.1.4.1.2272.1.22.2.1.7 | ColumnrcSyslogHostSeverity | read-write | current | Specifies the severity level for which syslog messages should be sent for the modules specifies in 'SyslogHostModule'. Value is one of multiple (logical 'OR') … |
| 1.3.6.1.4.1.2272.1.22.2.1.8 | ColumnrcSyslogHostMapInfoSeverity | read-write | current | Specifies the syslog severity to use for Accelar INFO messages. Default is INFO. |
| 1.3.6.1.4.1.2272.1.22.2.1.9 | ColumnrcSyslogHostMapWarningSeverity | read-write | current | Specifies the syslog severity to use for Accelar WARNING messages. Default is WARNING. Should be <= INFO. |
| 1.3.6.1.4.1.2272.1.22.2.1.10 | ColumnrcSyslogHostMapErrorSeverity | read-write | current | Specifies the syslog severity to use for Accelar ERROR messages. Default is ERROR. Should be <= WARNING. |
| 1.3.6.1.4.1.2272.1.22.2.1.11 | ColumnrcSyslogHostMapMfgSeverity | read-write | current | Specifies the syslog severity to use for Accelar Manufactoring messages. Dafault is ERROR. |
| 1.3.6.1.4.1.2272.1.22.2.1.12 | ColumnrcSyslogHostMapFatalSeverity | read-write | current | Specifies the syslog severity to use for Accelar FATAL messages. Default is EMERGENCY. Should be <= ERROR. |
| 1.3.6.1.4.1.2272.1.22.2.1.13 | ColumnrcSyslogHostMapTraceMsg | read-write | current | Specifies the syslog severity to use for syslog trace messages. Default is DEBUG. |
| 1.3.6.1.4.1.2272.1.22.2.1.14 | ColumnrcSyslogHostMapTrapMsg | read-write | current | Specifies the UNIX severity code to use for syslog messages for SNMP traps sent to the syslog host. Default is INFO. |
| 1.3.6.1.4.1.2272.1.22.2.1.15 | ColumnrcSyslogHostLogTraceMsgs | read-write | current | Indicate whether to activate the host to log the syslog trace messages. |
| 1.3.6.1.4.1.2272.1.22.2.1.16 | ColumnrcSyslogHostLogTrapMsgs | read-write | current | Indicate whether to activate the host to log the syslog messages for SNMP traps. |
| 1.3.6.1.4.1.2272.1.22.2.1.17 | ColumnrcSyslogHostEnable | read-write | current | Enable/Disable messages to be sent to syslog host. |
| 1.3.6.1.4.1.2272.1.22.2.1.18 | ColumnrcSyslogHostRowStatus | read-write | current | Used to create/delete entries in the rcSyslogTable. |
| 1.3.6.1.4.1.2272.1.22.2.1.19 | ColumnrcSyslogHostAddressType | read-write | current | Address Type of the Host. |
| 1.3.6.1.4.1.2272.1.22.2.1.20 | ColumnrcSyslogHostAddress | read-write | current | Address of the Host. |
| 1.3.6.1.4.1.2272.1.23 | NodercDiag | |||
| 1.3.6.1.4.1.2272.1.23.1 | TablercDiagMirrorByPortTable | not-accessible | current | This table is used to configure the Mirror By Port feature. This feature allows the device to forward a copy of each packet seen on a particular port to a diff… |
| 1.3.6.1.4.1.2272.1.23.1.1 | RowrcDiagMirrorByPortEntry | not-accessible | current | Entry containing mirror by port information. |
| 1.3.6.1.4.1.2272.1.23.1.1.1 | ColumnrcDiagMirrorByPortId | read-only | current | Entry id. |
| 1.3.6.1.4.1.2272.1.23.1.1.2 | ColumnrcDiagMirrorByPortMirroredPort | read-write | current | Used to configure the 'mirrored' port. The port where packets are copied from. |
| 1.3.6.1.4.1.2272.1.23.1.1.3 | ColumnrcDiagMirrorByPortMirroringPort | read-write | current | Used to configure the 'mirroring' port. The port where packets are copied to. |
| 1.3.6.1.4.1.2272.1.23.1.1.4 | ColumnrcDiagMirrorByPortMode | read-write | current | Used to configure the 'mode' of the mirror operation. 'tx' means packets being transmitted on the 'mirrored' port will be copied. 'rx' means packets received o… |
| 1.3.6.1.4.1.2272.1.23.1.1.5 | ColumnrcDiagMirrorByPortEnable | read-write | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.23.1.1.6 | ColumnrcDiagMirrorByPortRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.23.1.1.8 | ColumnrcDiagMirrorByPortPid | read-only | current | Pid for a port. |
| 1.3.6.1.4.1.2272.1.23.1.1.9 | ColumnrcDiagMirrorRemoteMirrorVlanId | read-write | current | vlan-id to which mirrored packets needs to be send for remote mirroring. If set, this vlan id is used in mirror tag of the remote mirrored packet |
| 1.3.6.1.4.1.2272.1.23.1.1.12 | ColumnrcDiagMirrorByPortMirroredPortList | read-create | current | Used to configure the 'mirrored' port. The port where packets are copied from. |
| 1.3.6.1.4.1.2272.1.23.1.1.13 | ColumnrcDiagMirrorByPortMirroringPortList | read-create | current | Used to configure the 'mirroring' port. The port where packets are copied from. |
| 1.3.6.1.4.1.2272.1.23.1.1.14 | ColumnrcDiagMirrorMirroringVlanId | read-create | current | Destination is a VLAN. |
| 1.3.6.1.4.1.2272.1.23.1.1.15 | ColumnrcDiagMirrorMirroringMltId | read-create | current | Destination is an MLT. |
| 1.3.6.1.4.1.2272.1.23.1.1.16 | ColumnrcDiagMirrorMirroringMgId | read-only | current | Contains information about the MGID allocated. |
| 1.3.6.1.4.1.2272.1.23.1.1.17 | ColumnrcDiagMirrorMirroringIpAddr | read-write | current | Destination IP address. |
| 1.3.6.1.4.1.2272.1.23.1.1.18 | ColumnrcDiagMirrorMirroringIpTtl | read-write | current | Ttl value for the mirrored packet when mirror destination is IP. If other than default, the encapsulated packet will have the given ttl. |
| 1.3.6.1.4.1.2272.1.23.1.1.19 | ColumnrcDiagMirrorMirroringIpDscp | read-write | current | Dscp value for mirrored packets when mirror destination is IP. If other than default, the encapsulated packet will have the given Dscp value. |
| 1.3.6.1.4.1.2272.1.23.2 | TablercDiagPortConvSteeringTable | not-accessible | current | Diag Port Conv Steering Table |
| 1.3.6.1.4.1.2272.1.23.2.1 | RowrcDiagPortConvSteeringEntry | not-accessible | current | Entry containing information of Diag Port Conv Steering. |
| 1.3.6.1.4.1.2272.1.23.2.1.1 | ColumnrcDiagPortConvSteeringId | read-only | current | Entry id. |
| 1.3.6.1.4.1.2272.1.23.2.1.2 | ColumnrcDiagPortConvSteeringPortOne | read-write | current | IfIndex for port one |
| 1.3.6.1.4.1.2272.1.23.2.1.3 | ColumnrcDiagPortConvSteeringPortTwo | read-write | current | IfIndex for port two |
| 1.3.6.1.4.1.2272.1.23.2.1.4 | ColumnrcDiagPortConvSteeringMode | read-write | current | Used to specify the traffic flow that should be captured between ports one and two. |
| 1.3.6.1.4.1.2272.1.23.2.1.5 | ColumnrcDiagPortConvSteeringForwardPort | read-write | current | IfIndex of the port where captured traffic should be forwarded to. |
| 1.3.6.1.4.1.2272.1.23.2.1.6 | ColumnrcDiagPortConvSteeringEnable | read-write | current | Enable this entry. |
| 1.3.6.1.4.1.2272.1.23.2.1.7 | ColumnrcDiagPortConvSteeringRowStatus | read-write | current | Used to create/delete entries in the rcDiagMirrorByPortTable. |
| 1.3.6.1.4.1.2272.1.23.3 | TablercDiagMacConvSteeringTable | not-accessible | current | Diag Mac Conv Steering Table |
| 1.3.6.1.4.1.2272.1.23.3.1 | RowrcDiagMacConvSteeringEntry | not-accessible | current | Entry containing information of Diag Mac Conv Steering. |
| 1.3.6.1.4.1.2272.1.23.3.1.1 | ColumnrcDiagMacConvSteeringId | read-only | current | Entry id. |
| 1.3.6.1.4.1.2272.1.23.3.1.2 | ColumnrcDiagMacConvSteeringSrcMac | read-write | current | Source MAC address |
| 1.3.6.1.4.1.2272.1.23.3.1.3 | ColumnrcDiagMacConvSteeringDstMac | read-write | current | Destination MAC address |
| 1.3.6.1.4.1.2272.1.23.3.1.4 | ColumnrcDiagMacConvSteeringInPort | read-write | current | IfIndex of ingress port. |
| 1.3.6.1.4.1.2272.1.23.3.1.5 | ColumnrcDiagMacConvSteeringForwardPort | read-write | current | IfIndex of the port where captured traffic should be forwarded to. |
| 1.3.6.1.4.1.2272.1.23.3.1.6 | ColumnrcDiagMacConvSteeringEnable | read-write | current | Enable this entry. |
| 1.3.6.1.4.1.2272.1.23.3.1.7 | ColumnrcDiagMacConvSteeringRowStatus | read-write | current | Used to create/delete entries in the rcDiagMirrorByPortTable. |
| 1.3.6.1.4.1.2272.1.23.11 | ScalarrcDiagMirrorByPortTblSize | read-only | current | Used to indicate table size. |
| 1.3.6.1.4.1.2272.1.23.12 | ScalarrcDiagPortConvSteeringTblSize | read-only | current | Used to indicate table size. |
| 1.3.6.1.4.1.2272.1.23.13 | ScalarrcDiagMacConvSteeringTblSize | read-only | current | Used to indicate table size. |
| 1.3.6.1.4.1.2272.1.23.15 | NodercDiagPcap | |||
| 1.3.6.1.4.1.2272.1.23.15.1 | ScalarrcDiagPcapEnable | read-write | current | To enable pcap in secondary CPU |
| 1.3.6.1.4.1.2272.1.23.15.2 | ScalarrcDiagPcapBufferWrap | read-write | current | To enable buffer wrap-around when buffer is full. If set, pcap will continue to capture pkts, otherwise stops pkt storing |
| 1.3.6.1.4.1.2272.1.23.15.3 | ScalarrcDiagPcapPcmciaWrap | read-write | current | To wrap around the PCMCIA when saving data in PCMCIA. In Vsp,the name has been changed to wrap-auto-save-file. When this parameter is true it overwrites the fi… |
| 1.3.6.1.4.1.2272.1.23.15.4 | ScalarrcDiagPcapFrameSize | read-write | current | Number of bytes of pkts needs to be stored |
| 1.3.6.1.4.1.2272.1.23.15.5 | ScalarrcDiagPcapBufferSize | read-write | current | memory to be allocated for capturing the pkt |
| 1.3.6.1.4.1.2272.1.23.15.6 | ScalarrcDiagPcapAutoSave | read-write | current | To save data automatically when buffer is full |
| 1.3.6.1.4.1.2272.1.23.15.7 | ScalarrcDiagPcapAutoSaveFileName | read-write | current | Name of the file in which the pkt is to be stored |
| 1.3.6.1.4.1.2272.1.23.15.8 | ScalarrcDiagPcapAutoSaveDevice | read-write | current | Where to store the captured pkts. If the option is network, the user need to enter an IP address also |
| 1.3.6.1.4.1.2272.1.23.15.9 | ScalarrcDiagPcapAutoSaveNetworkIpAddress | read-write | current | ip address of the remote host where the data needs to be stored. This field is valid only if the device is network |
| 1.3.6.1.4.1.2272.1.23.15.10 | ScalarrcDiagPcapFilterTableSize | read-only | current | Used to indicate the number of entries in the Filter table |
| 1.3.6.1.4.1.2272.1.23.15.11 | TablercDiagPcapFilterTable | not-accessible | current | A table used to store pcap secondary filters |
| 1.3.6.1.4.1.2272.1.23.15.11.1 | RowrcDiagPcapFilterEntry | not-accessible | current | Pcap secondary filter desc |
| 1.3.6.1.4.1.2272.1.23.15.11.1.1 | ColumnrcDiagPcapFilterId | read-only | current | Unique ID that represents the filter |
| 1.3.6.1.4.1.2272.1.23.15.11.1.2 | ColumnrcDiagPcapFilterEnable | read-write | current | Filter is enabled or not |
| 1.3.6.1.4.1.2272.1.23.15.11.1.3 | ColumnrcDiagPcapFilterAction | read-write | current | Action to be takesn when policy is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.4 | ColumnrcDiagPcapFilterSrcMac | read-write | current | Soruce mac address to match |
| 1.3.6.1.4.1.2272.1.23.15.11.1.5 | ColumnrcDiagPcapFilterSrcMask | read-write | current | Soruce mac address mask. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.6 | ColumnrcDiagPcapFilterIsInverseSrcMac | read-write | current | Soruce mac address Inverse. when set the mac addresses otherthan specified is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.7 | ColumnrcDiagPcapFilterDstMac | read-write | current | Destination mac address |
| 1.3.6.1.4.1.2272.1.23.15.11.1.8 | ColumnrcDiagPcapFilterDstMask | read-write | current | Destination mac address mask. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.9 | ColumnrcDiagPcapFilterIsInverseDstMac | read-write | current | Destination mac address Inverse. when set the mac addresses otherthan specified is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.10 | ColumnrcDiagPcapFilterVlanId | read-write | current | Vlan-id of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.11 | ColumnrcDiagPcapFilterToVlanId | read-write | current | To Vlan-id. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.12 | ColumnrcDiagPcapFilterIsInverseVlanId | read-write | current | Vlan-Id Inverse. when set the Vlan-Id otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.13 | ColumnrcDiagPcapFilterPbit | read-write | current | pBit of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.14 | ColumnrcDiagPcapFilterToPbit | read-write | current | To pBit. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.15 | ColumnrcDiagPcapFilterIsInversePbit | read-write | current | pBit Inverse. when set the pBit otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.16 | ColumnrcDiagPcapFilterEtherType | read-write | current | EtherType of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.17 | ColumnrcDiagPcapFilterToEtherType | read-write | current | To EtherType. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.18 | ColumnrcDiagPcapFilterIsInverseEtherType | read-write | current | EtherType Inverse. when set the EtherType otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.19 | ColumnrcDiagPcapFilterProtocolType | read-write | current | ProtocolType of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.20 | ColumnrcDiagPcapFilterToProtocolType | read-write | current | To ProtocolType. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.21 | ColumnrcDiagPcapFilterIsInverseProtocolType | read-write | current | ProtocolType Inverse. when set the ProtocolType otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.22 | ColumnrcDiagPcapFilterSrcIp | read-write | current | Source IP address of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.23 | ColumnrcDiagPcapFilterToSrcIp | read-write | current | To Source IP address. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.24 | ColumnrcDiagPcapFilterIsInverseSrcIp | read-write | current | Source IP address Inverse. when set the source IP otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.25 | ColumnrcDiagPcapFilterDstIp | read-write | current | Destination IP address of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.26 | ColumnrcDiagPcapFilterToDstIp | read-write | current | To Destination IP address. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.27 | ColumnrcDiagPcapFilterIsInverseDstIp | read-write | current | Destination IP address Inverse. when set the Destination IP otherthan specified is range matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.28 | ColumnrcDiagPcapFilterDscp | read-write | current | DSCP value of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.29 | ColumnrcDiagPcapFilterToDscp | read-write | current | To DSCP. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.11.1.30 | ColumnrcDiagPcapFilterIsInverseDscp | read-write | current | DSCP Inverse. when set the DSCP otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.11.1.31 | ColumnrcDiagPcapFilterRowStatus | read-write | current | Row Status |
| 1.3.6.1.4.1.2272.1.23.15.11.1.32 | ColumnrcDiagPcapFilterDscpMatchZero | read-write | current | When this value is set to true, then 0 value of Pbit is not taken as disable value. The user will be allowed to capture packets with Pbit value of 0 also. Be d… |
| 1.3.6.1.4.1.2272.1.23.15.11.1.33 | ColumnrcDiagPcapFilterPbitMatchZero | read-write | current | When this value is set to true, then 0 value of Pbit is not taken as disable value. The user will be allowed to capture packets with Pbit value of 0 also. Be d… |
| 1.3.6.1.4.1.2272.1.23.15.12 | ScalarrcDiagPcapAdvancedFilterTableSize | read-only | current | Used to indicate the number of entries in the Filter table advanced parameter |
| 1.3.6.1.4.1.2272.1.23.15.13 | TablercDiagPcapAdvancedFilterTable | not-accessible | current | A table used to store pcap secondary filters |
| 1.3.6.1.4.1.2272.1.23.15.13.1 | RowrcDiagPcapAdvancedFilterEntry | not-accessible | current | Pcap secondary Advanced filter desc |
| 1.3.6.1.4.1.2272.1.23.15.13.1.1 | ColumnrcDiagPcapAdvancedFilterId | read-only | current | Unique ID that represents the filter |
| 1.3.6.1.4.1.2272.1.23.15.13.1.2 | ColumnrcDiagPcapAdvancedFilterUdpPort | read-write | current | UdpPort of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.3 | ColumnrcDiagPcapAdvancedFilterToUdpPort | read-write | current | To UdpPort. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.13.1.4 | ColumnrcDiagPcapAdvancedFilterIsInverseUdpPort | read-write | current | UdpPort Inverse. when set the UdpPort otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.5 | ColumnrcDiagPcapAdvancedFilterTcpPort | read-write | current | TcpPort of the packet to be matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.6 | ColumnrcDiagPcapAdvancedFilterToTcpPort | read-write | current | To TcpPort. Used to specify a range |
| 1.3.6.1.4.1.2272.1.23.15.13.1.7 | ColumnrcDiagPcapAdvancedFilterIsInverseTcpPort | read-write | current | TcpPort Inverse. when set the TcpPort otherthan specified range is matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.8 | ColumnrcDiagPcapAdvancedFilterUserDefinedData | read-write | current | User defined data to match with the packets received |
| 1.3.6.1.4.1.2272.1.23.15.13.1.9 | ColumnrcDiagPcapAdvancedFilterUserDefinedDataSize | read-write | current | Length of user defined data |
| 1.3.6.1.4.1.2272.1.23.15.13.1.10 | ColumnrcDiagPcapAdvancedFilterUserDefinedOffset | read-write | current | Offset from which match has to start |
| 1.3.6.1.4.1.2272.1.23.15.13.1.11 | ColumnrcDiagPcapAdvancedFilterIsInverseUserDefined | read-write | current | TcpPort Inverse. when set the Userdata otherthan specified is matched |
| 1.3.6.1.4.1.2272.1.23.15.13.1.12 | ColumnrcDiagPcapAdvancedFilterTimer | read-write | current | Timer to start the pcap capture window in ms |
| 1.3.6.1.4.1.2272.1.23.15.13.1.13 | ColumnrcDiagPcapAdvancedFilterPacketCount | read-write | current | Number of packets to be captured before disabling pcap |
| 1.3.6.1.4.1.2272.1.23.15.13.1.14 | ColumnrcDiagPcapAdvancedFilterRefreshTimer | read-write | current | Refresh timer in ms |
| 1.3.6.1.4.1.2272.1.23.15.13.1.15 | ColumnrcDiagPcapAdvancedFilterRowStatus | read-write | current | RowStatus |
| 1.3.6.1.4.1.2272.1.23.15.14 | ScalarrcDiagPcapCopyFileName | read-write | current | Used to indicate the file name. When set, the PCAP data from PCAP engine RAM is stored into this file in PCAP engine |
| 1.3.6.1.4.1.2272.1.23.15.15 | ScalarrcDiagPcapResetStat | read-write | current | To Reset PCAP statistics |
| 1.3.6.1.4.1.2272.1.23.15.16 | ScalarrcDiagPcapStatPacketCapacityCount | read-only | current | Packet Capacity Count |
| 1.3.6.1.4.1.2272.1.23.15.17 | ScalarrcDiagPcapStatNumberOfPacketsReceived | read-only | current | Number of packets received in PCAP engine |
| 1.3.6.1.4.1.2272.1.23.15.18 | ScalarrcDiagPcapStatNumberOfPacketsAccumulated | read-only | current | Number of packets captured in PCAP engine |
| 1.3.6.1.4.1.2272.1.23.15.19 | ScalarrcDiagPcapStatNumberOfPacketsDroppedInPcapEngine | read-only | current | Number of packets dropped in PCAP engine by filters |
| 1.3.6.1.4.1.2272.1.23.15.20 | ScalarrcDiagPcapStatNumberOfPacketsDroppedInHardware | read-only | current | Number of packets dropped in Hardware |
| 1.3.6.1.4.1.2272.1.23.15.21 | ScalarrcDiagPcapDataValid | read-only | current | A true/false value that indicate the return data whether is valid. |
| 1.3.6.1.4.1.2272.1.23.15.22 | ScalarrcDiagPcapEtherTypeForSvlanLevel | read-write | current | EtherType of svlan level. |
| 1.3.6.1.4.1.2272.1.24 | NodercIpx | |||
| 1.3.6.1.4.1.2272.1.26 | NodercPos | |||
| 1.3.6.1.4.1.2272.1.26.1 | TablercPosPppIpxTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.26.1.1 | RowrcPosPppIpxEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.26.1.1.1 | ColumnrcPosPppIpxIfIndex | read-only | current | port number. |
| 1.3.6.1.4.1.2272.1.26.1.1.2 | ColumnrcPosPppIpxIpxcpAdminStatus | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.1.1.3 | ColumnrcPosPppIpxOperStatus | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.1.1.4 | ColumnrcPosPppIpxNetAddr | read-write | current | IPX Network address. |
| 1.3.6.1.4.1.2272.1.26.1.1.5 | ColumnrcPosPppIpxRoutingProtocol | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.2 | TablercPosSonetTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.26.2.1 | RowrcPosSonetEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.1 | ColumnrcPosSonetIndex | read-only | current | pos ifIndex. |
| 1.3.6.1.4.1.2272.1.26.2.1.2 | ColumnrcPosSonetFraming | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.3 | ColumnrcPosSonetSectionTrace | read-write | current | config. J0 byte |
| 1.3.6.1.4.1.2272.1.26.2.1.4 | ColumnrcPosSonetSectionGrowth | read-write | current | config. Z0 byte |
| 1.3.6.1.4.1.2272.1.26.2.1.5 | ColumnrcPosSonetSyncronization | read-write | current | config. S1 byte |
| 1.3.6.1.4.1.2272.1.26.2.1.6 | ColumnrcPosSonetStsPathTrace | read-write | current | config. 64/16 byte. |
| 1.3.6.1.4.1.2272.1.26.2.1.7 | ColumnrcPosSonetPathSignalLabel | read-write | current | config. C2 byte |
| 1.3.6.1.4.1.2272.1.26.2.1.8 | ColumnrcPosSonetClockSource | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.9 | ColumnrcPosSonetScramble | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.10 | ColumnrcPosSonetOperStatusFraming | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.11 | ColumnrcPosSonetOperStatusClockSource | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.12 | ColumnrcPosSonetOperStatusScramble | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.13 | ColumnrcPosSonetOperStatusSectionTrace | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.2.1.14 | ColumnrcPosSonetOperStatusPathSignalLabel | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.3 | TablercPosLineStatusTable | not-accessible | current | Pos Line Status Table |
| 1.3.6.1.4.1.2272.1.26.3.1 | RowrcPosLineStatusEntry | not-accessible | current | Entry containing information of Pos Line Status. |
| 1.3.6.1.4.1.2272.1.26.3.1.1 | ColumnrcPosLineStatusIndex | read-only | current | pos ifIndex, same as rcPosPppIpxIfIndex. |
| 1.3.6.1.4.1.2272.1.26.3.1.2 | ColumnrcPosLineStatusLocalMACAddress | read-only | current | current local MAC address |
| 1.3.6.1.4.1.2272.1.26.3.1.3 | ColumnrcPosLineStatusRemoteMACAddress | read-only | current | current remote MAC address |
| 1.3.6.1.4.1.2272.1.26.3.1.4 | ColumnrcPosLineStatusLocalIpAddr | read-only | current | current local ip addr |
| 1.3.6.1.4.1.2272.1.26.3.1.5 | ColumnrcPosLineStatusRemoteIpAddr | read-only | current | current remote ip addr |
| 1.3.6.1.4.1.2272.1.26.3.1.6 | ColumnrcPosLineStatusOutQuality | read-only | current | current output quality. |
| 1.3.6.1.4.1.2272.1.26.3.1.7 | ColumnrcPosLineStatusLocalPeriod | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.3.1.8 | ColumnrcPosLineStatusDeviceType | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.3.1.9 | ColumnrcPosLineStatusDeviceRev | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.3.1.10 | ColumnrcPosLineStatusIpxRoutingProtocol | read-only | current | |
| 1.3.6.1.4.1.2272.1.26.4 | TablercPosLineConfigTable | not-accessible | current | Pos Line Config Table |
| 1.3.6.1.4.1.2272.1.26.4.1 | RowrcPosLineConfigEntry | not-accessible | current | Entry containing information of Pos Line Config. |
| 1.3.6.1.4.1.2272.1.26.4.1.1 | ColumnrcPosLineConfigIndex | read-only | current | pos ifIndex, same as rcPosPppIpxIfIndex. |
| 1.3.6.1.4.1.2272.1.26.4.1.2 | ColumnrcPosLineConfigLocalMACAddress | read-write | current | current local MAC address |
| 1.3.6.1.4.1.2272.1.26.4.1.3 | ColumnrcPosLineConfigRemoteMACAddress | read-write | current | current remote MAC address |
| 1.3.6.1.4.1.2272.1.26.4.1.4 | ColumnrcPosLineConfigLocalIpAddr | read-write | current | current local ip addr |
| 1.3.6.1.4.1.2272.1.26.4.1.5 | ColumnrcPosLineConfigRemoteIpAddr | read-write | current | current remote ip addr |
| 1.3.6.1.4.1.2272.1.26.4.1.6 | ColumnrcPosLineConfigRemoteReportPeriod | read-write | current | config. remote report period. |
| 1.3.6.1.4.1.2272.1.26.4.1.7 | ColumnrcPosLineConfigLqrThreshold | read-write | current | config. input quality. |
| 1.3.6.1.4.1.2272.1.26.4.1.8 | ColumnrcPosLineConfigOutQuality | read-write | current | config. output quality. |
| 1.3.6.1.4.1.2272.1.26.4.1.9 | ColumnrcPosLineConfigPppStp | read-write | current | STP PPP encoding enable T/F |
| 1.3.6.1.4.1.2272.1.26.4.1.10 | ColumnrcPosLineConfigLoopBack | read-write | current | perform loop-back. |
| 1.3.6.1.4.1.2272.1.26.4.1.11 | ColumnrcPosLineConfigIpxVlanMacAddress | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.4.1.12 | ColumnrcPosLineConfigIpxRemoteMacAddress | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.5 | NodercPosSonetTrap | |||
| 1.3.6.1.4.1.2272.1.26.5.1 | ScalarrcPosSonetTrapType | read-only | current | Used to indicate a particular type of Sonet trap. |
| 1.3.6.1.4.1.2272.1.26.5.2 | ScalarrcPosSonetTrapIndication | read-only | current | Used to indicate an indication for a Sonet trap. |
| 1.3.6.1.4.1.2272.1.26.6 | TablercPosSioCardConfigTable | not-accessible | current | Pos Sio Card Config Table |
| 1.3.6.1.4.1.2272.1.26.6.1 | RowrcPosSioCardConfigEntry | not-accessible | current | Entry containing information of Pos Sio Card Config. |
| 1.3.6.1.4.1.2272.1.26.6.1.1 | ColumnrcPosSioCardConfigSlotIndex | read-only | current | slot Index. |
| 1.3.6.1.4.1.2272.1.26.6.1.2 | ColumnrcPosSioCardConfigAction | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.6.1.3 | ColumnrcPosSioCardConfigTraceMode | read-write | current | |
| 1.3.6.1.4.1.2272.1.26.6.1.4 | ColumnrcPosSioCardConfigImageFileName | read-only | current | POS Image file name. |
| 1.3.6.1.4.1.2272.1.26.7 | TablercPosOperStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.26.7.1 | RowrcPosOperStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.26.7.1.1 | ColumnrcPosOperStatusIndex | read-only | current | pos ifIndex. |
| 1.3.6.1.4.1.2272.1.26.7.1.2 | ColumnrcPosOperStatusLqrStatus | read-only | current | Operational status of pppLqrConfigStatus. |
| 1.3.6.1.4.1.2272.1.26.7.1.3 | ColumnrcPosOperStatusLineLqrThreshold | read-only | current | . |
| 1.3.6.1.4.1.2272.1.26.7.1.4 | ColumnrcPosOperStatusLinkMagicNumber | read-only | current | . |
| 1.3.6.1.4.1.2272.1.26.7.1.5 | ColumnrcPosOperStatusLinePppStp | read-only | current | |
| 1.3.6.1.4.1.2272.1.27 | NodercLinkFlapDetect | |||
| 1.3.6.1.4.1.2272.1.27.1 | ScalarrcLinkFlapDetectAutoPortDownEnable | read-write | current | Used to enable/disable the Link Flap Detect feature. When enabled this feature will monitor the number of times a port goes down during a certain interval. If … |
| 1.3.6.1.4.1.2272.1.27.2 | ScalarrcLinkFlapDetectSendTrap | read-write | current | Used to configure whether a trap should be sent if the port is forced out-of-service. |
| 1.3.6.1.4.1.2272.1.27.3 | ScalarrcLinkFlapDetectFrequency | read-write | current | Used to configure the number of times the port can go down. |
| 1.3.6.1.4.1.2272.1.27.4 | ScalarrcLinkFlapDetectInterval | read-write | current | Used to configure the interval (in minutes). |
| 1.3.6.1.4.1.2272.1.28 | NodercV1Traps | |||
| 1.3.6.1.4.1.2272.1.29 | NodercRadius | |||
| 1.3.6.1.4.1.2272.1.29.1 | NodercRadiusGlobal | |||
| 1.3.6.1.4.1.2272.1.29.1.1 | ScalarrcRadiusGlobalEnable | read-write | current | Enable/disable this feature. |
| 1.3.6.1.4.1.2272.1.29.1.2 | ScalarrcRadiusGlobalMaxNumberServer | read-write | current | Maximum number of RADIUS servers. |
| 1.3.6.1.4.1.2272.1.29.1.3 | ScalarrcRadiusGlobalAttributeValue | read-write | current | Integer value for Access-Priority attribute. |
| 1.3.6.1.4.1.2272.1.29.1.4 | ScalarrcRadiusGlobalServerTableSize | read-only | current | Used to indicate the number of entries in the rcRadiusServerTable. |
| 1.3.6.1.4.1.2272.1.29.1.5 | ScalarrcRadiusGlobalAcctEnable | read-write | current | Enable/disable Radius Accounting feature. |
| 1.3.6.1.4.1.2272.1.29.1.6 | ScalarrcRadiusGlobalAcctAttributeValue | read-write | current | Integer value for User-Command attribute. |
| 1.3.6.1.4.1.2272.1.29.1.7 | ScalarrcRadiusGlobalAcctIncludeCli | read-write | current | Include/Exclude cli-commands in radius acccounting updates. |
| 1.3.6.1.4.1.2272.1.29.1.8 | ScalarrcRadiusGlobalClearStat | read-write | current | Clear Radius Statistic for all servers configured. |
| 1.3.6.1.4.1.2272.1.29.1.9 | ScalarrcRadiusGlobalMcastAttributeValue | read-write | current | Integer value for multicast address vendor specific attribute. |
| 1.3.6.1.4.1.2272.1.29.1.10 | ScalarrcRadiusGlobalAuthInfoAttributeValue | read-write | current | Integer value for Auth-Info vendor specific attribute. |
| 1.3.6.1.4.1.2272.1.29.1.11 | ScalarrcRadiusGlobalCommandAccess | read-write | current | Integer value for Command-Access attribute. |
| 1.3.6.1.4.1.2272.1.29.1.12 | ScalarrcRadiusGlobalCliCommands | read-write | current | Integer value for Cli-Command attribute. |
| 1.3.6.1.4.1.2272.1.29.1.13 | ScalarrcRadiusGlobalIgapLogFSize | read-write | current | Maximum size for the IGAP accounting time-out log file in KB. |
| 1.3.6.1.4.1.2272.1.29.1.14 | ScalarrcRadiusGlobalCliProfEnable | read-write | current | Enable/disable Radius CLI Profiling. |
| 1.3.6.1.4.1.2272.1.29.1.15 | ScalarrcRadiusGlobalAuthInvalidServerAddress | read-only | current | Number of Access Responses from unknown or invalid Radius servers. |
| 1.3.6.1.4.1.2272.1.29.1.16 | ScalarrcRadiusGlobalSourceIpFlag | read-write | current | Flag to include configured IP address as source address in RADIUS packets. |
| 1.3.6.1.4.1.2272.1.29.1.18 | ScalarrcRadiusGlobalCliCmdCount | read-write | current | Integer value for Cli-Command-count. |
| 1.3.6.1.4.1.2272.1.29.3 | TablercRadiusServTable | not-accessible | deprecated | The RADIUS table (0 to 10 entries). This table lists the information of the RADIUS server. |
| 1.3.6.1.4.1.2272.1.29.3.1 | RowrcRadiusServEntry | not-accessible | deprecated | A RADIUS server table entry. |
| 1.3.6.1.4.1.2272.1.29.3.1.1 | ColumnrcRadiusServPriority | read-write | deprecated | Server priority, used to control which server to choose first to send authentication. |
| 1.3.6.1.4.1.2272.1.29.3.1.2 | ColumnrcRadiusServAddress | read-write | deprecated | Server IP address of the RADIUS authentication server referred to in this table entry. |
| 1.3.6.1.4.1.2272.1.29.3.1.3 | ColumnrcRadiusServTimeOut | read-write | deprecated | The time interval in seconds before the client retransmit the packet. |
| 1.3.6.1.4.1.2272.1.29.3.1.4 | ColumnrcRadiusServEnable | read-write | deprecated | Enable or disable this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.5 | ColumnrcRadiusServMaxRetries | read-write | deprecated | Maximum number of retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.6 | ColumnrcRadiusServUdpPort | read-write | deprecated | The UDP port the client is using to send requests to this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.7 | ColumnrcRadiusServSecretKey | read-write | deprecated | The identifier of the RADIUS authentication client. |
| 1.3.6.1.4.1.2272.1.29.3.1.8 | ColumnrcRadiusServAccessRequests | read-only | deprecated | The number of RADIUS access-response packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.9 | ColumnrcRadiusServAccessAccepts | read-only | deprecated | The number of RADIUS access-accept packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.10 | ColumnrcRadiusServAccessRejects | read-only | deprecated | The number of RADIUS access-reject packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.11 | ColumnrcRadiusServBadResponses | read-only | deprecated | The number of RADIUS invalid access-response packets received from this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.12 | ColumnrcRadiusServPendingRequests | read-only | deprecated | The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an a… |
| 1.3.6.1.4.1.2272.1.29.3.1.13 | ColumnrcRadiusServClientRetries | read-only | deprecated | The number of authentication retransmission to this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.14 | ColumnrcRadiusServRowStatus | read-write | deprecated | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.29.3.1.15 | ColumnrcRadiusServAcctEnable | read-write | deprecated | Enable or disable Radius Accounting on this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.16 | ColumnrcRadiusServAcctUdpPort | read-write | deprecated | The UDP port the client used to send accounting requests to this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.17 | ColumnrcRadiusServAcctOnRequests | read-only | deprecated | The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.18 | ColumnrcRadiusServAcctOffRequests | read-only | deprecated | The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.19 | ColumnrcRadiusServAcctStartRequests | read-only | deprecated | The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.20 | ColumnrcRadiusServAcctStopRequests | read-only | deprecated | The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.21 | ColumnrcRadiusServAcctInterimRequests | read-only | deprecated | The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.3.1.22 | ColumnrcRadiusServAcctBadResponses | read-only | deprecated | The number of Invalid responses received from this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.23 | ColumnrcRadiusServAcctPendingRequests | read-only | deprecated | The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this s… |
| 1.3.6.1.4.1.2272.1.29.3.1.24 | ColumnrcRadiusServAcctClientRetries | read-only | deprecated | The number of RADIUS accounting packets retransmitted to this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.25 | ColumnrcRadiusServUsedBy | read-only | deprecated | cli(1): for cli login, igap(2): for igap,snmp(3): for snmp login, eap(4) for EAP PAE Authenticator web(5) for web-server(http/https) login. |
| 1.3.6.1.4.1.2272.1.29.3.1.26 | ColumnrcRadiusServNasIpAddress | read-only | deprecated | RADIUS Client NAS Identifier for this server. |
| 1.3.6.1.4.1.2272.1.29.3.1.27 | ColumnrcRadiusServRoundTripTime | read-only | deprecated | Time different between the instance when a RADIUS request is sent and the corresponding response is received. |
| 1.3.6.1.4.1.2272.1.29.3.1.28 | ColumnrcRadiusServAccessChallanges | read-only | deprecated | The number of RADIUS access-challanges packets sent to this server. This does not include retransmission. |
| 1.3.6.1.4.1.2272.1.29.3.1.29 | ColumnrcRadiusServSourceIpAddr | read-write | deprecated | source IP address RADIUS packets. |
| 1.3.6.1.4.1.2272.1.29.4 | NodercRadiusGlobalSnmp | |||
| 1.3.6.1.4.1.2272.1.29.4.1 | ScalarrcRadiusGlobalSnmpEnable | read-write | current | Enable/disable snmp radius authentication. |
| 1.3.6.1.4.1.2272.1.29.4.2 | ScalarrcRadiusGlobalSnmpAcctEnable | read-write | current | Enable/disable Radius Accounting for SNMP. |
| 1.3.6.1.4.1.2272.1.29.4.3 | ScalarrcRadiusGlobalSnmpReAuthenticateTimer | read-write | current | Integer value representing Re-Authenticate Timer in seconds. Timer to be used to Re- Authenticate a SNMP Session. |
| 1.3.6.1.4.1.2272.1.29.4.4 | ScalarrcRadiusGlobalSnmpAbortSessionTimer | read-write | current | Integer value representing the time in seconds after which the snmp session is considered expired and Radius Accounting Stop message is sent. |
| 1.3.6.1.4.1.2272.1.29.4.5 | ScalarrcRadiusGlobalSnmpUserName | read-write | current | User name for Radius SNMP Accounting. |
| 1.3.6.1.4.1.2272.1.29.4.6 | ScalarrcRadiusEapLastRejMac | read-only | current | Used to store the Last Rejected MAC address on an EAP enabled port. |
| 1.3.6.1.4.1.2272.1.29.4.7 | ScalarrcRadiusPaePortNumber | read-only | current | Used to store the Port Number on which the Mac Intrusion happened. |
| 1.3.6.1.4.1.2272.1.29.4.8 | ScalarrcRadiusEapLastAuthMac | read-only | current | Used to store the Last Authenticated MAC address on an EAP enabled port. |
| 1.3.6.1.4.1.2272.1.29.5 | TablercRadiusServHostTable | not-accessible | current | The RADIUS Server Host table (0 to 10 entries). This table lists the information of the RADIUS server. |
| 1.3.6.1.4.1.2272.1.29.5.1 | RowrcRadiusServHostEntry | not-accessible | current | A RADIUS server table entry. |
| 1.3.6.1.4.1.2272.1.29.5.1.1 | ColumnrcRadiusServHostAddressType | not-accessible | current | Inet Address Type of radius server host address. |
| 1.3.6.1.4.1.2272.1.29.5.1.2 | ColumnrcRadiusServHostAddress | not-accessible | current | Server IP address of the RADIUS authentication server referred to in this table entry. |
| 1.3.6.1.4.1.2272.1.29.5.1.3 | ColumnrcRadiusServHostUsedBy | not-accessible | current | cli(1): for cli login, igap(2): for igap,snmp(3): for snmp login, eap(4) for EAP PAE Authenticator web(5) for web-server(http/https) login. IGAP is not support… |
| 1.3.6.1.4.1.2272.1.29.5.1.4 | ColumnrcRadiusServHostPriority | read-create | current | Server priority, used to control which server to choose first to send authentication. |
| 1.3.6.1.4.1.2272.1.29.5.1.5 | ColumnrcRadiusServHostTimeOut | read-create | current | The time interval in seconds before the client retransmit the packet. |
| 1.3.6.1.4.1.2272.1.29.5.1.6 | ColumnrcRadiusServHostEnable | read-create | current | Enable or disable this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.7 | ColumnrcRadiusServHostMaxRetries | read-create | current | Maximum number of retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.8 | ColumnrcRadiusServHostUdpPort | read-create | current | The UDP port the client is using to send requests to this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.9 | ColumnrcRadiusServHostSecretKey | read-create | current | The identifier of the RADIUS authentication client. |
| 1.3.6.1.4.1.2272.1.29.5.1.10 | ColumnrcRadiusServHostAccessRequests | read-only | current | The number of RADIUS access-response packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.11 | ColumnrcRadiusServHostAccessAccepts | read-only | current | The number of RADIUS access-accept packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.12 | ColumnrcRadiusServHostAccessRejects | read-only | current | The number of RADIUS access-reject packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.13 | ColumnrcRadiusServHostBadResponses | read-only | current | The number of RADIUS invalid access-response packets received from this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.14 | ColumnrcRadiusServHostPendingRequests | read-only | current | The number of RADIUS access-request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an a… |
| 1.3.6.1.4.1.2272.1.29.5.1.15 | ColumnrcRadiusServHostClientRetries | read-only | current | The number of authentication retransmission to this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.16 | ColumnrcRadiusServHostRowStatus | read-create | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.29.5.1.17 | ColumnrcRadiusServHostAcctEnable | read-create | current | Enable or disable Radius Accounting on this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.18 | ColumnrcRadiusServHostAcctUdpPort | read-create | current | The UDP port the client used to send accounting requests to this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.19 | ColumnrcRadiusServHostAcctOnRequests | read-only | current | The number of RADIUS accounting-on packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.20 | ColumnrcRadiusServHostAcctOffRequests | read-only | current | The number of RADIUS accounting-off packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.21 | ColumnrcRadiusServHostAcctStartRequests | read-only | current | The number of RADIUS accounting-start packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.22 | ColumnrcRadiusServHostAcctStopRequests | read-only | current | The number of RADIUS accounting-stop packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.23 | ColumnrcRadiusServHostAcctInterimRequests | read-only | current | The number of RADIUS accounting-interim packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.2272.1.29.5.1.24 | ColumnrcRadiusServHostAcctBadResponses | read-only | current | The number of Invalid responses received from this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.25 | ColumnrcRadiusServHostAcctPendingRequests | read-only | current | The number of RADIUS accounting packets that are waiting be sent to this server. This variable is incremented whenever any accounting-request is sent to this s… |
| 1.3.6.1.4.1.2272.1.29.5.1.26 | ColumnrcRadiusServHostAcctClientRetries | read-only | current | The number of RADIUS accounting packets retransmitted to this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.27 | ColumnrcRadiusServHostNasIpAddress | read-only | current | RADIUS Client NAS Identifier for this server. |
| 1.3.6.1.4.1.2272.1.29.5.1.28 | ColumnrcRadiusServHostRoundTripTime | read-only | current | Time different between the instance when a RADIUS request is sent and the corresponding response is received. |
| 1.3.6.1.4.1.2272.1.29.5.1.29 | ColumnrcRadiusServHostAccessChallanges | read-only | current | The number of RADIUS access-challanges packets sent to this server. This does not include retransmission. |
| 1.3.6.1.4.1.2272.1.29.5.1.30 | ColumnrcRadiusServHostSourceIpAddr | read-create | current | source IP address RADIUS packets. |
| 1.3.6.1.4.1.2272.1.30 | NodercIgmp | |||
| 1.3.6.1.4.1.2272.1.30.1 | TablercIgmpInterfaceExtnTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.1.1 | RowrcIgmpInterfaceExtnEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.1.1.1 | ColumnrcIgmpInterfaceExtnIfIndex | read-only | current | ifindex. |
| 1.3.6.1.4.1.2272.1.30.1.1.2 | ColumnrcIgmpInterfaceExtnSnoopEnable | read-write | current | enable snoop. |
| 1.3.6.1.4.1.2272.1.30.1.1.3 | ColumnrcIgmpInterfaceExtnProxySnoopEnable | read-write | current | enable proxy snoop. |
| 1.3.6.1.4.1.2272.1.30.1.1.4 | ColumnrcIgmpInterfaceExtnMaxAdvertiseInterval | read-write | current | |
| 1.3.6.1.4.1.2272.1.30.1.1.5 | ColumnrcIgmpInterfaceExtnMinAdvertiseInterval | read-write | current | |
| 1.3.6.1.4.1.2272.1.30.1.1.6 | ColumnrcIgmpInterfaceExtnMaxInitialAdvertiseInterval | read-write | current | |
| 1.3.6.1.4.1.2272.1.30.1.1.7 | ColumnrcIgmpInterfaceExtnMaxInitialAdvertments | read-write | current | |
| 1.3.6.1.4.1.2272.1.30.1.1.8 | ColumnrcIgmpInterfaceExtnNeighborDeadInterval | read-write | current | |
| 1.3.6.1.4.1.2272.1.30.1.1.9 | ColumnrcIgmpInterfaceExtnFastLeaveEnable | read-write | current | Enable fast leave on this interface. |
| 1.3.6.1.4.1.2272.1.30.1.1.10 | ColumnrcIgmpInterfaceExtnFastLeavePortMembers | read-write | current | The set of ports that are enabled for fast leave. |
| 1.3.6.1.4.1.2272.1.30.1.1.11 | ColumnrcIgmpInterfaceExtnMrdiscEnable | read-write | current | Enable/disable multicast router discovery. |
| 1.3.6.1.4.1.2272.1.30.1.1.12 | ColumnrcIgmpInterfaceExtnDiscoveredRouterPorts | read-only | current | list of ports that discovered by IGMP Multicast router discovery (MRDISC) protocol. |
| 1.3.6.1.4.1.2272.1.30.1.1.13 | ColumnrcIgmpInterfaceExtnSnoopMRouterPorts | read-write | current | The set of ports in this interface that provide connectivity to an IP Multicast router. |
| 1.3.6.1.4.1.2272.1.30.1.1.14 | ColumnrcIgmpInterfaceExtnSnoopActiveMRouterPorts | read-only | current | Active ports. |
| 1.3.6.1.4.1.2272.1.30.1.1.15 | ColumnrcIgmpInterfaceExtnSnoopMRouterExpiration | read-only | current | Multicast querier router aging time out. |
| 1.3.6.1.4.1.2272.1.30.1.1.16 | ColumnrcIgmpInterfaceExtnFlushAction | read-write | current | IGMP flush action. |
| 1.3.6.1.4.1.2272.1.30.1.1.17 | ColumnrcIgmpInterfaceExtnRouterAlertEnable | read-write | current | Enable Router Alert Check. |
| 1.3.6.1.4.1.2272.1.30.1.1.18 | ColumnrcIgmpInterfaceExtnSsmEnable | read-write | current | enable SSM. |
| 1.3.6.1.4.1.2272.1.30.1.1.20 | ColumnrcIgmpInterfaceExtnAccntEnable | read-write | current | enable/disable accounting. |
| 1.3.6.1.4.1.2272.1.30.1.1.21 | ColumnrcIgmpInterfaceExtnAuthEnable | read-write | current | enable/disable authentication. |
| 1.3.6.1.4.1.2272.1.30.1.1.22 | ColumnrcIgmpInterfaceExtnStreamLimitEnable | read-write | current | Stream Limitation enable/disable. |
| 1.3.6.1.4.1.2272.1.30.1.1.23 | ColumnrcIgmpInterfaceExtnMaxStreams | read-write | current | Maximum number of stream. |
| 1.3.6.1.4.1.2272.1.30.1.1.24 | ColumnrcIgmpInterfaceExtnNumStreams | read-only | current | Current number of streams. |
| 1.3.6.1.4.1.2272.1.30.1.1.25 | ColumnrcIgmpInterfaceExtnNewQuerier | read-only | current | The address of the New IGMP Querier on the IP subnet to which this interface is attached. |
| 1.3.6.1.4.1.2272.1.30.1.1.26 | ColumnrcIgmpInterfaceExtnSnoopQuerierEnable | read-write | current | enable snoop querier. |
| 1.3.6.1.4.1.2272.1.30.1.1.27 | ColumnrcIgmpInterfaceExtnSnoopQuerierAddr | read-write | current | The pseudo address of the IGMP Snoop Querier. |
| 1.3.6.1.4.1.2272.1.30.1.1.28 | ColumnrcIgmpInterfaceExtnMvrEnable | read-write | current | Enable or disable mcast-vlan-registration on a vlan, it is used to specified a vlan works as a mcast-vlan, maximum 16 mcast-vlan is supported. |
| 1.3.6.1.4.1.2272.1.30.1.1.29 | ColumnrcIgmpInterfaceExtnMvrProxyEnable | read-write | current | enable or disable mcast-vlan-registration proxy on a vlan, you must enable mcast-vlan-registration at first. |
| 1.3.6.1.4.1.2272.1.30.1.1.30 | ColumnrcIgmpInterfaceExtnDynamicDowngradeEnable | read-write | current | enable dynamic downgrade the IGMP version when older version query message was received. |
| 1.3.6.1.4.1.2272.1.30.1.1.31 | ColumnrcIgmpInterfaceExtnCompatibilityModeEnable | read-write | current | enable v2 v3 compatible mode, which will handle the IGMP v2 message in v3 interface |
| 1.3.6.1.4.1.2272.1.30.1.1.32 | ColumnrcIgmpInterfaceExtnOperVersion | read-only | current | The operational version of IGMP which is running on this interface. |
| 1.3.6.1.4.1.2272.1.30.1.1.33 | ColumnrcIgmpInterfaceExtnExplicitHostTrackingEnable | read-write | current | Enable the IGMP protocol running in version 3 to track hosts per channels/groups. |
| 1.3.6.1.4.1.2272.1.30.2 | TablercIgmpStaticTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.2.1 | RowrcIgmpStaticEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.2.1.1 | ColumnrcIgmpStaticIfIndex | read-only | current | ifindex |
| 1.3.6.1.4.1.2272.1.30.2.1.2 | ColumnrcIgmpStaticGrpAddr | read-only | current | Ip multicast address. The GrpAddress holds the starting range for the address range. If the ToGrpAddress is not entered, the it is as good as entering a single… |
| 1.3.6.1.4.1.2272.1.30.2.1.3 | ColumnrcIgmpStaticMemberPorts | read-write | current | egressing ports. |
| 1.3.6.1.4.1.2272.1.30.2.1.4 | ColumnrcIgmpStaticNotAllowedToJoin | read-write | current | not allowed to join. |
| 1.3.6.1.4.1.2272.1.30.2.1.5 | ColumnrcIgmpStaticRowStatus | read-write | current | Used to create/delete entries in the rcIgmpStaticEntry. |
| 1.3.6.1.4.1.2272.1.30.2.1.6 | ColumnrcIgmpStaticToGrpAddr | read-write | current | To hold the range for the GrpAddress. |
| 1.3.6.1.4.1.2272.1.30.3 | TablercIgmpAccessTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.3.1 | RowrcIgmpAccessEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.3.1.1 | ColumnrcIgmpAccessIfIndex | read-only | current | ifindex |
| 1.3.6.1.4.1.2272.1.30.3.1.2 | ColumnrcIgmpAccessGrpAddr | read-only | current | ip multicast addr. |
| 1.3.6.1.4.1.2272.1.30.3.1.3 | ColumnrcIgmpAccessHostAddr | read-only | current | host addr. |
| 1.3.6.1.4.1.2272.1.30.3.1.4 | ColumnrcIgmpAccessMode | read-write | current | denyTX(1), denyRX(2), denyBOTH(3). |
| 1.3.6.1.4.1.2272.1.30.3.1.5 | ColumnrcIgmpAccessRowStatus | read-write | current | Used to create/delete entries in the rcIgmpAccessEntry. |
| 1.3.6.1.4.1.2272.1.30.3.1.6 | ColumnrcIgmpAccessHostMask | read-only | current | host mask. |
| 1.3.6.1.4.1.2272.1.30.4 | TablercIgmpSenderTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.4.1 | RowrcIgmpSenderEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.4.1.1 | ColumnrcIgmpSenderGrpAddr | read-only | current | ip multicast addr. |
| 1.3.6.1.4.1.2272.1.30.4.1.2 | ColumnrcIgmpSenderIfIndex | read-only | current | ifindex |
| 1.3.6.1.4.1.2272.1.30.4.1.3 | ColumnrcIgmpSenderMemberAddr | read-only | current | host addr. |
| 1.3.6.1.4.1.2272.1.30.4.1.4 | ColumnrcIgmpSenderAction | read-write | current | none(0), flushEntry(1), flushGrp(2). |
| 1.3.6.1.4.1.2272.1.30.4.1.5 | ColumnrcIgmpSenderTPort | read-only | current | Igmp Sender Tport. |
| 1.3.6.1.4.1.2272.1.30.4.1.6 | ColumnrcIgmpSenderState | read-only | current | Indicates if a sender exists because of an IGMP access filter or not. |
| 1.3.6.1.4.1.2272.1.30.5 | NodercIgmpSsmGlobal | |||
| 1.3.6.1.4.1.2272.1.30.5.1 | ScalarrcIgmpSsmGlobalDynamicLearning | read-write | current | Enable/disable dynamic learning or source/group pair from IGMPv3 report. |
| 1.3.6.1.4.1.2272.1.30.5.2 | ScalarrcIgmpSsmGlobalAdminAction | read-write | current | Set the admin status of all the Ssm entries to enable/disable at once. |
| 1.3.6.1.4.1.2272.1.30.5.3 | ScalarrcIgmpSsmGlobalRangeGroup | read-write | current | If multicast group address & RangeMask == RangeGroup, then RangeGroup is in Ssm Range. Else it is not in the range. |
| 1.3.6.1.4.1.2272.1.30.5.4 | ScalarrcIgmpSsmGlobalRangeMask | read-write | current | Used with RangeGroup. |
| 1.3.6.1.4.1.2272.1.30.6 | TablercIgmpSsmTable | not-accessible | deprecated | |
| 1.3.6.1.4.1.2272.1.30.6.1 | RowrcIgmpSsmEntry | not-accessible | deprecated | |
| 1.3.6.1.4.1.2272.1.30.6.1.1 | ColumnrcIgmpSsmIpMulticastGrp | read-only | deprecated | This is the IP multicast group address that has default range of 232/8. This parameter should be configured by the user. |
| 1.3.6.1.4.1.2272.1.30.6.1.2 | ColumnrcIgmpSsmIpSource | read-write | deprecated | This is the Source's IP address that will be sending traffic to the group source. This parameter should be configured by the user. |
| 1.3.6.1.4.1.2272.1.30.6.1.3 | ColumnrcIgmpSsmLearningMode | read-only | deprecated | This is a read only field that provides information if the entry is statically configured entry (Static) or a dynamically learned entry from IGMPv3 (Dynamic). … |
| 1.3.6.1.4.1.2272.1.30.6.1.4 | ColumnrcIgmpSsmActivity | read-only | deprecated | This is a read only field. It provides the activity on the corresponding (S,G). If the source is active and traffic is flowing to the switch, this field value … |
| 1.3.6.1.4.1.2272.1.30.6.1.5 | ColumnrcIgmpSsmAdminState | read-write | deprecated | The admin state provides information on whether the entry is to be used or not. If the value of this field is Enabled (default), then the entry can be used. If… |
| 1.3.6.1.4.1.2272.1.30.6.1.6 | ColumnrcIgmpSsmRowStatus | read-write | deprecated | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.30.7 | TablercIgmpNewAccessTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.7.1 | RowrcIgmpNewAccessEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.7.1.1 | ColumnrcIgmpNewAccessIfIndex | read-only | current | ifindex |
| 1.3.6.1.4.1.2272.1.30.7.1.2 | ColumnrcIgmpNewAccessPrefixListId | read-only | current | Prefix List ID. |
| 1.3.6.1.4.1.2272.1.30.7.1.3 | ColumnrcIgmpNewAccessPrefixListName | read-write | current | Prefix List name. |
| 1.3.6.1.4.1.2272.1.30.7.1.4 | ColumnrcIgmpNewAccessHostAddr | read-only | current | host addr. |
| 1.3.6.1.4.1.2272.1.30.7.1.5 | ColumnrcIgmpNewAccessHostMask | read-only | current | host mask. |
| 1.3.6.1.4.1.2272.1.30.7.1.6 | ColumnrcIgmpNewAccessActionMode | read-write | current | action mode. |
| 1.3.6.1.4.1.2272.1.30.7.1.7 | ColumnrcIgmpNewAccessRowStatus | read-write | current | Used to create/delete entries in the rcIgmpNewAccessEntry. |
| 1.3.6.1.4.1.2272.1.30.8 | TablercIgmpChannelLimitTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.8.1 | RowrcIgmpChannelLimitEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.8.1.1 | ColumnrcIgmpChannelLimitIfIndex | read-only | current | ifindex |
| 1.3.6.1.4.1.2272.1.30.8.1.2 | ColumnrcIgmpChannelLimitPort | read-only | current | The port belong to this vlan. |
| 1.3.6.1.4.1.2272.1.30.8.1.3 | ColumnrcIgmpChannelLimitMaxStreams | read-write | current | Maximum number of stream. |
| 1.3.6.1.4.1.2272.1.30.8.1.4 | ColumnrcIgmpChannelLimitNumStreams | read-only | current | Current number of streams. |
| 1.3.6.1.4.1.2272.1.30.8.1.5 | ColumnrcIgmpChannelLimitRowStatus | read-write | current | Row Status. |
| 1.3.6.1.4.1.2272.1.30.11 | NodercIgmpGlobalParams | |||
| 1.3.6.1.4.1.2272.1.30.11.1 | ScalarrcIgmpFastLeaveMode | read-write | current | Set the fast-leave mode to be used by for all fast-leave enabled IGMP interfaces. |
| 1.3.6.1.4.1.2272.1.30.11.2 | ScalarrcIgmpGenerateTrap | read-write | current | Enabling the IGMP to generate trap. |
| 1.3.6.1.4.1.2272.1.30.11.3 | ScalarrcIgmpGenerateLog | read-write | current | Enabling the IGMP to generate log. |
| 1.3.6.1.4.1.2272.1.30.12 | TablercIgmpCacheExtnTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.12.1 | RowrcIgmpCacheExtnEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.12.1.1 | ColumnrcIgmpCacheExtnType | read-only | current | It takes up either of the two values, dynamic or static depending upon whether the entry is learnt Dynamic or is added statically. |
| 1.3.6.1.4.1.2272.1.30.12.1.2 | ColumnrcIgmpCacheExtnStaticPorts | read-only | current | It displays the static ports for the static joins, this would be null for the dynamic entry. |
| 1.3.6.1.4.1.2272.1.30.13 | TablercIgmpSnoopTraceTable | not-accessible | current | The table listing the multicast groups traversing the snoop enabled router |
| 1.3.6.1.4.1.2272.1.30.13.1 | RowrcIgmpSnoopTraceEntry | not-accessible | current | The entry listing the multicast groups traversing the snoop enabled router |
| 1.3.6.1.4.1.2272.1.30.13.1.1 | ColumnrcIgmpSnoopGrpAddr | not-accessible | current | ip mcast addr of grp traversing the router |
| 1.3.6.1.4.1.2272.1.30.13.1.2 | ColumnrcIgmpSnoopSrcAddr | not-accessible | current | Ip src addr of the mcast grp address |
| 1.3.6.1.4.1.2272.1.30.13.1.3 | ColumnrcIgmpSnoopOutVlan | not-accessible | current | Egress vlan id for the mcast group |
| 1.3.6.1.4.1.2272.1.30.13.1.4 | ColumnrcIgmpSnoopInPort | read-only | current | Ingress port for the mcast grp |
| 1.3.6.1.4.1.2272.1.30.13.1.5 | ColumnrcIgmpSnoopInVlan | read-only | current | Ingress vlan id for the mcast source |
| 1.3.6.1.4.1.2272.1.30.13.1.6 | ColumnrcIgmpSnoopOutPort | read-only | current | Egress port of the mcast grp |
| 1.3.6.1.4.1.2272.1.30.14 | TablercIgmpNewGroupTable | not-accessible | current | The (conceptual) table listing the multicast groups configured in the device. |
| 1.3.6.1.4.1.2272.1.30.14.1 | RowrcIgmpNewGroupEntry | not-accessible | current | An entry (conceptual row) representing an Igmp group. |
| 1.3.6.1.4.1.2272.1.30.14.1.1 | ColumnrcIgmpNewGroupIpAddress | not-accessible | current | Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports. |
| 1.3.6.1.4.1.2272.1.30.14.1.2 | ColumnrcIgmpNewGroupMembers | not-accessible | current | IP Address of a source that has sent group report wishing to join this group. |
| 1.3.6.1.4.1.2272.1.30.14.1.3 | ColumnrcIgmpNewGroupInPort | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.30.14.1.4 | ColumnrcIgmpNewGroupExpiration | read-only | current | Time left before the group report expired on this port. Only one of this variable port. This variable is updated upon receiving a group report. |
| 1.3.6.1.4.1.2272.1.30.14.1.5 | ColumnrcIgmpNewGroupIfIndex | read-only | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.30.14.1.6 | ColumnrcIgmpNewGroupUserId | read-only | current | User-id sending this group |
| 1.3.6.1.4.1.2272.1.30.14.1.7 | ColumnrcIgmpNewGroupMemberState | read-only | current | Used for IGAP, to indicated member state. |
| 1.3.6.1.4.1.2272.1.30.14.1.8 | ColumnrcIgmpNewGroupSessionTime | read-only | current | Used for IGAP, to indicated the session time in seconds for the member. Session time is started after traffic is available to member. It can be also called Acc… |
| 1.3.6.1.4.1.2272.1.30.24 | TablercIgmpv3CacheTable | not-accessible | current | The (conceptual) table listing the Igmpv3 specific data corresponding to each interface, port and multicast group pair on a Router. |
| 1.3.6.1.4.1.2272.1.30.24.1 | RowrcIgmpv3CacheEntry | not-accessible | current | An entry (conceptual row) representing an Igmpv3 Group. |
| 1.3.6.1.4.1.2272.1.30.24.1.1 | ColumnrcIgmpv3CacheEntryGroupAddress | not-accessible | current | Multicast group Address (Class D) that others want to join. A group address can be the same for many incoming ports. |
| 1.3.6.1.4.1.2272.1.30.24.1.2 | ColumnrcIgmpv3CacheEntryIfIndex | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.30.24.1.3 | ColumnrcIgmpv3CacheEntryInPort | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports from various sources. |
| 1.3.6.1.4.1.2272.1.30.24.1.4 | ColumnrcIgmpv3CacheEntryModeExpiryTimer | read-only | current | This value is applicable only to IGMPv3-compatible nodes and represents the time remaining before the interface EXCLUDE state expires and the interface state t… |
| 1.3.6.1.4.1.2272.1.30.24.1.5 | ColumnrcIgmpv3CacheEntryVersion1HostTimer | read-only | current | The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. This ent… |
| 1.3.6.1.4.1.2272.1.30.24.1.6 | ColumnrcIgmpv3CacheEntryVersion2HostTimer | read-only | current | The time remaining until the local router will assume that there are no longer any IGMP version 2 members on the IP subnet attached to this interface. Upon hea… |
| 1.3.6.1.4.1.2272.1.30.24.1.7 | ColumnrcIgmpv3CacheEntrySourceFilterMode | read-only | current | The current group state, applicable to IGMPv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE. |
| 1.3.6.1.4.1.2272.1.30.25 | TablercIgmpRouterSrcListTable | not-accessible | current | The (conceptual) table listing the Source List entries corresponding to each interface and multicast group pair on a Router. |
| 1.3.6.1.4.1.2272.1.30.25.1 | RowrcIgmpRouterSrcListEntry | not-accessible | current | An entry (conceptual row) representing an Igmp Source. |
| 1.3.6.1.4.1.2272.1.30.25.1.1 | ColumnrcIgmpRouterSrcListGroupAddress | not-accessible | current | The IP multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.2272.1.30.25.1.2 | ColumnrcIgmpRouterSrcListIfIndex | not-accessible | current | The interface for which this entry contains information for an IP multicast group address. |
| 1.3.6.1.4.1.2272.1.30.25.1.3 | ColumnrcIgmpRouterSrcListInPort | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN), which has received Group reports for this source. |
| 1.3.6.1.4.1.2272.1.30.25.1.4 | ColumnrcIgmpRouterSrcListHostAddress | not-accessible | current | The host address to which this entry corresponds. |
| 1.3.6.1.4.1.2272.1.30.25.1.5 | ColumnrcIgmpRouterSrcListMemberAddress | not-accessible | current | IP Address of a member that has sent source specific report wishing to join this source. |
| 1.3.6.1.4.1.2272.1.30.25.1.6 | ColumnrcIgmpRouterSrcListExpire | read-only | current | This value indicates the relevance of the SrcList entry, whereby a non-zero value indicates this is an INCLUDE state value, and a zero value indicates this to … |
| 1.3.6.1.4.1.2272.1.30.25.1.7 | ColumnrcIgmpRouterSrcListMode | read-only | current | The current member state, applicable to IGMPv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE. |
| 1.3.6.1.4.1.2272.1.30.25.1.8 | ColumnrcIgmpRouterSrcListMemberExpire | read-only | current | This value indicates the time until the member for this source will expire |
| 1.3.6.1.4.1.2272.1.30.26 | TablercIgmpNewSsmTable | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.26.1 | RowrcIgmpNewSsmEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.30.26.1.1 | ColumnrcIgmpNewSsmIpMulticastGrp | not-accessible | current | This is the IP multicast group address that has default range of 232/8. This parameter should be configured by the user. |
| 1.3.6.1.4.1.2272.1.30.26.1.2 | ColumnrcIgmpNewSsmIpSource | not-accessible | current | This is the Source's IP address that will be sending traffic to the group source. This parameter should be configured by the user. |
| 1.3.6.1.4.1.2272.1.30.26.1.3 | ColumnrcIgmpNewSsmLearningMode | read-only | current | This is a read only field that provides information if the entry is statically configured entry (Static) or a dynamically learned entry from IGMPv3 (Dynamic). … |
| 1.3.6.1.4.1.2272.1.30.26.1.4 | ColumnrcIgmpNewSsmActivity | read-only | current | This is a read only field. It provides the activity on the corresponding (S,G). If the source is active and traffic is flowing to the switch, this field value … |
| 1.3.6.1.4.1.2272.1.30.26.1.5 | ColumnrcIgmpNewSsmAdminState | read-create | current | The admin state provides information on whether the entry is to be used or not. If the value of this field is Enabled (default), then the entry can be used. If… |
| 1.3.6.1.4.1.2272.1.30.26.1.6 | ColumnrcIgmpNewSsmRowStatus | read-create | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.31 | NodercUserSetTime | |||
| 1.3.6.1.4.1.2272.1.31.1 | ScalarrcUserSetTimeYear | read-write | current | Year of the time. |
| 1.3.6.1.4.1.2272.1.31.2 | ScalarrcUserSetTimeMonth | read-write | current | Month of the time. |
| 1.3.6.1.4.1.2272.1.31.3 | ScalarrcUserSetTimeDate | read-write | current | Date of the time. |
| 1.3.6.1.4.1.2272.1.31.4 | ScalarrcUserSetTimeHour | read-write | current | Hour of the time. |
| 1.3.6.1.4.1.2272.1.31.5 | ScalarrcUserSetTimeMinute | read-write | current | Minute of the time. |
| 1.3.6.1.4.1.2272.1.31.6 | ScalarrcUserSetTimeSecond | read-write | current | Second of the time. |
| 1.3.6.1.4.1.2272.1.31.7 | ScalarrcUserSetTimeTimezone | read-write | current | Timezone values. Since + is not a valid character inside enum declaration, E(ast) and W(est) are used to indicate + and - respectively. For example, etc-GMTE1 … |
| 1.3.6.1.4.1.2272.1.32 | NodercL2Redundancy | |||
| 1.3.6.1.4.1.2272.1.32.1 | ScalarrcL2RedundancyHaCpuState | read-only | current | Indicate the Ha-CPU state. initialization - indicate the CPU is in this state. oneWayActive - Modules that need to be synchronized have registered with the fra… |
| 1.3.6.1.4.1.2272.1.32.2 | ScalarrcL2RedundancyHaEvent | read-only | current | Indicate the Ha event status. restart (0) - Causes the state machine to restart systemRegistrationDone (1)- Causes the CPU to transfer to One Way or Two Way Ac… |
| 1.3.6.1.4.1.2272.1.32.3 | ScalarrcL2RedundancyEnable | read-write | current | Indicate the feature enable/disable. |
| 1.3.6.1.4.1.2272.1.32.4 | ScalarrcL2RedundancyStandbyCpu | read-only | current | Indicate if the L2 Redundancy is enabled on the standby CPU. |
| 1.3.6.1.4.1.2272.1.33 | NodercNtp | |||
| 1.3.6.1.4.1.2272.1.33.1 | NodercNtpGlobal | |||
| 1.3.6.1.4.1.2272.1.33.1.1 | ScalarrcNtpGlobalEnable | read-write | current | Enable/disable NTP feature |
| 1.3.6.1.4.1.2272.1.33.1.2 | ScalarrcNtpGlobalInterval | read-write | current | Time interval between successive NTP updates in minutes. |
| 1.3.6.1.4.1.2272.1.33.2 | TablercNtpServerTable | not-accessible | current | The NTP server table. This table lists the information of a NTP server |
| 1.3.6.1.4.1.2272.1.33.2.1 | RowrcNtpServerEntry | not-accessible | current | A NTP server table entry. |
| 1.3.6.1.4.1.2272.1.33.2.1.1 | ColumnrcNtpServerAddress | read-only | current | Server IP address of NTP time source referred to in this table entry. |
| 1.3.6.1.4.1.2272.1.33.2.1.2 | ColumnrcNtpServerEnable | read-write | current | Enable or disable this server for participation in time update. |
| 1.3.6.1.4.1.2272.1.33.2.1.3 | ColumnrcNtpServerAuthentication | read-write | current | Enable or disable the MD5 Authentication on this serve. |
| 1.3.6.1.4.1.2272.1.33.2.1.4 | ColumnrcNtpServerKeyId | read-write | current | Public Key used to generate MD5 digest for this server. |
| 1.3.6.1.4.1.2272.1.33.2.1.5 | ColumnrcNtpServerAccessAttempts | read-only | current | The number of NTP requests sent to this server |
| 1.3.6.1.4.1.2272.1.33.2.1.6 | ColumnrcNtpServerAccessSuccess | read-only | current | The number of times this server was selected to update the time |
| 1.3.6.1.4.1.2272.1.33.2.1.7 | ColumnrcNtpServerAccessFailure | read-only | current | The number of times this server was rejected from updating the time |
| 1.3.6.1.4.1.2272.1.33.2.1.8 | ColumnrcNtpServerRowStatus | read-write | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.33.2.1.9 | ColumnrcNtpServerStratum | read-only | current | Stratum of this server |
| 1.3.6.1.4.1.2272.1.33.2.1.10 | ColumnrcNtpServerVersion | read-only | current | NTP version of this server |
| 1.3.6.1.4.1.2272.1.33.2.1.11 | ColumnrcNtpServerRootDelay | read-only | current | Root Delay of this server |
| 1.3.6.1.4.1.2272.1.33.2.1.12 | ColumnrcNtpServerPrecision | read-only | current | NTP precision of this server in seconds |
| 1.3.6.1.4.1.2272.1.33.2.1.13 | ColumnrcNtpServerReachable | read-only | current | NTP Reachability of this server |
| 1.3.6.1.4.1.2272.1.33.2.1.14 | ColumnrcNtpServerSynchronized | read-only | current | Status of synchronization with this server |
| 1.3.6.1.4.1.2272.1.33.3 | TablercNtpKeyTable | not-accessible | current | The NTP key table. This table lists the private key of the public key Id |
| 1.3.6.1.4.1.2272.1.33.3.1 | RowrcNtpKeyEntry | not-accessible | current | A NTP key table entry. |
| 1.3.6.1.4.1.2272.1.33.3.1.1 | ColumnrcNtpKeyId | read-only | current | Public Key used to generate MD5 digest |
| 1.3.6.1.4.1.2272.1.33.3.1.2 | ColumnrcNtpKeySecret | read-write | current | Private Key used to generate MD5 Digest |
| 1.3.6.1.4.1.2272.1.33.3.1.3 | ColumnrcNtpKeyRowStatus | read-write | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.34 | NodercSsh | |||
| 1.3.6.1.4.1.2272.1.34.1 | NodercSshGlobal | |||
| 1.3.6.1.4.1.2272.1.34.1.1 | ScalarrcSshGlobalVersion | read-write | current | SSH version |
| 1.3.6.1.4.1.2272.1.34.1.2 | ScalarrcSshGlobalPort | read-write | current | SSH connection port. |
| 1.3.6.1.4.1.2272.1.34.1.3 | ScalarrcSshGlobalMaxSession | read-write | current | Number of session allowed. |
| 1.3.6.1.4.1.2272.1.34.1.4 | ScalarrcSshGlobalTimeout | read-write | current | SSH connection timeout in seconds. |
| 1.3.6.1.4.1.2272.1.34.1.5 | ScalarrcSshGlobalRsaKeySize | read-write | current | SSH Rsa key size. |
| 1.3.6.1.4.1.2272.1.34.1.6 | ScalarrcSshGlobalDsaKeySize | read-write | current | SSH Dsa key size. |
| 1.3.6.1.4.1.2272.1.34.1.7 | ScalarrcSshGlobalRsaAuth | read-write | current | Enable/disable SSH RSA authentication |
| 1.3.6.1.4.1.2272.1.34.1.8 | ScalarrcSshGlobalDsaAuth | read-write | current | Enable/disable SSH DSA authentication |
| 1.3.6.1.4.1.2272.1.34.1.9 | ScalarrcSshGlobalPassAuth | read-write | current | Enable/disable SSH RSA authentication |
| 1.3.6.1.4.1.2272.1.34.1.10 | ScalarrcSshGlobalKeyAction | read-write | current | SSH key action. |
| 1.3.6.1.4.1.2272.1.34.1.11 | ScalarrcSshGlobalEnable | read-write | current | Enable/disable, or securely enable SSH. Securely enable turns off other daemon flag, and it takes ffect afte reboot |
| 1.3.6.1.4.1.2272.1.34.1.12 | ScalarrcSshGlobalHostIpAddr | read-write | current | current remote ip addr |
| 1.3.6.1.4.1.2272.1.34.2 | TablercSslMipTable | not-accessible | current | This table would display the MIP of the SSL blade according to the slot number. |
| 1.3.6.1.4.1.2272.1.34.2.1 | RowrcSslMipTableEntry | not-accessible | current | This table get the MIP of the SSL blade on which the blade is in different cluster. |
| 1.3.6.1.4.1.2272.1.34.2.1.1 | ColumnrcSslMipSlot | read-only | current | Used as an index to find out the MIP of SSL blade. |
| 1.3.6.1.4.1.2272.1.34.2.1.2 | ColumnrcSslMipMip | read-only | current | Master IP of the SSL blade. |
| 1.3.6.1.4.1.2272.1.35 | NodercSvlan | |||
| 1.3.6.1.4.1.2272.1.50 | NodercTengEnet | |||
| 1.3.6.1.4.1.2272.1.50.1 | NodercTengEnetStats | |||
| 1.3.6.1.4.1.2272.1.50.1.1 | TablercTengDot3StatsTable | not-accessible | current | Statistics for a collection of ethernet-like interfaces attached to a particular system. |
| 1.3.6.1.4.1.2272.1.50.1.1.1 | RowrcTengDot3StatsEntry | not-accessible | current | Statistics for a particular interface to an ethernet-like medium. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.1 | ColumnrcTengDot3StatsIndex | read-only | current | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.2 | ColumnrcTengDot3StatsAlignmentErrors | read-only | current | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented b… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.3 | ColumnrcTengDot3StatsFCSErrors | read-only | current | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.4 | ColumnrcTengDot3StatsSingleCollisionFrames | read-only | current | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by a… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.5 | ColumnrcTengDot3StatsMultipleCollisionFrames | read-only | current | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.6 | ColumnrcTengDot3StatsSQETestErrors | read-only | current | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section … |
| 1.3.6.1.4.1.2272.1.50.1.1.1.7 | ColumnrcTengDot3StatsDeferredTransmissions | read-only | current | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instanc… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.8 | ColumnrcTengDot3StatsLateCollisions | read-only | current | The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve … |
| 1.3.6.1.4.1.2272.1.50.1.1.1.9 | ColumnrcTengDot3StatsExcessiveCollisions | read-only | current | A count of frames for which transmission on a particular interface fails due to excessive collisions. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.10 | ColumnrcTengDot3StatsInternalMacTransmitErrors | read-only | current | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.11 | ColumnrcTengDot3StatsCarrierSenseErrors | read-only | current | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count repres… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.13 | ColumnrcTengDot3StatsFrameTooLongs | read-only | current | A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incre… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.16 | ColumnrcTengDot3StatsInternalMacReceiveErrors | read-only | current | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of … |
| 1.3.6.1.4.1.2272.1.50.1.1.1.17 | ColumnrcTengDot3StatsEtherChipSet | read-only | current | This object contains an OBJECT IDENTIFIER which identifies the chipset used to realize the interface. Ethernet-like interfaces are typically built out of sever… |
| 1.3.6.1.4.1.2272.1.50.1.1.1.18 | ColumnrcTengDot3StatsLinkFailures | read-only | current | The total number of link failures enCounter32ed on this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.19 | ColumnrcTengDot3StatsPacketErrors | read-only | current | The total number of packet errors enCounter32ed on this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.20 | ColumnrcTengDot3StatsCarrierErrors | read-only | current | The total number of carrier errors enCounter32ed on this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.21 | ColumnrcTengDot3StatsLinkInactiveErrors | read-only | current | The total number of link inactive errors enCounter32ed on this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.22 | ColumnrcTengDot3StatsInFlowCtrlPkts | read-only | current | The total number of flow control packets received by this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.23 | ColumnrcTengDot3StatsOutFlowCtrlPkts | read-only | current | The total number of flow control packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.24 | ColumnrcTengDot3StatsFrameTooShorts | read-only | current | The total number of frames that are too short that were enCounter32ed on this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.26 | ColumnrcTengDot3StatsInPfcPkts | read-only | current | The total number of Priority Flow Control (PFC) packets received by this interface. |
| 1.3.6.1.4.1.2272.1.50.1.1.1.27 | ColumnrcTengDot3StatsOutPfcPkts | read-only | current | The total number of Priority Flow Control (PFC) packets transmitted by this interface. |
| 1.3.6.1.4.1.2272.1.50.1.2 | TablercTengStatTable | not-accessible | current | A table used to store port statistics. |
| 1.3.6.1.4.1.2272.1.50.1.2.1 | RowrcTengStatEntry | not-accessible | current | interface Counter32s |
| 1.3.6.1.4.1.2272.1.50.1.2.1.1 | ColumnrcTengStatIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.2 | ColumnrcTengStatBridgeInUnicastFrames | read-only | current | The total number of incoming unicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.3 | ColumnrcTengStatBridgeInMulticastFrames | read-only | current | The total number of incoming multicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.4 | ColumnrcTengStatBridgeInBroadcastFrames | read-only | current | The total number of incoming broadcast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.5 | ColumnrcTengStatBridgeInDiscards | read-only | current | The total number of frames that were discarded by the bridging entity. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.6 | ColumnrcTengStatBridgeOutUnicastFrames | read-only | current | The total number of outgoing unicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.7 | ColumnrcTengStatBridgeOutMulticastFrames | read-only | current | The total number of outgoing multicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.8 | ColumnrcTengStatBridgeOutBroadcastFrames | read-only | current | The total number of outgoing broadcast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.9 | ColumnrcTengStatRouteInUnicastFrames | read-only | current | The total number of incoming unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.10 | ColumnrcTengStatRouteInMulticastFrames | read-only | current | The total number of incoming multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.11 | ColumnrcTengStatRouteInDiscards | read-only | current | The total number of frames that were discarded by the routing entity. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.12 | ColumnrcTengStatRouteOutUnicastFrames | read-only | current | The total number of outgoing unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.13 | ColumnrcTengStatRouteOutMulticastFrames | read-only | current | The total number of outgoing multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.14 | ColumnrcTengStatStgForwardTransitions | read-only | current | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.2272.1.50.1.2.1.15 | ColumnrcTengStatStgInConfigBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.50.1.2.1.16 | ColumnrcTengStatStgInTcnBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.50.1.2.1.17 | ColumnrcTengStatStgInBadBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.50.1.2.1.18 | ColumnrcTengStatStgOutConfigBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.50.1.2.1.19 | ColumnrcTengStatStgOutTcnBpdus | read-only | current | |
| 1.3.6.1.4.1.2272.1.50.1.2.1.20 | ColumnrcTengStatBridgeOutFrames | read-only | current | Used by the Accelar 8000 product family to account for all transmitted bridge unicast, broadcast, and multicast packets. The individual Counter32s are not supp… |
| 1.3.6.1.4.1.2272.1.50.1.3 | TablercTengIfTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of engIfNumber. |
| 1.3.6.1.4.1.2272.1.50.1.3.1 | RowrcTengIfEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.2272.1.50.1.3.1.1 | ColumnrcTengIfIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.2 | ColumnrcTengIfDescr | read-only | current | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the i… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.3 | ColumnrcTengIfType | read-only | current | The type of interface. Additional values for IfType are assigned by the Internet Assigned Numbers Authority (IANA), through updating the syntax of the IANAifTy… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.4 | ColumnrcTengIfMtu | read-only | current | The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.5 | ColumnrcTengIfSpeed | read-only | current | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.6 | ColumnrcTengIfPhysAddress | read-only | current | The interface's address at its protocol sub-layer. The interface's media-specific MIB must define the bit and byte ordering and format of the value contained b… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.7 | ColumnrcTengIfAdminStatus | read-write | current | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.8 | ColumnrcTengIfOperStatus | read-only | current | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If IfAdminStatus is down(2) then IfOp… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.9 | ColumnrcTengIfLastChange | read-only | current | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re-initialization of… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.10 | ColumnrcTengIfInOctets | read-only | current | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.2272.1.50.1.3.1.11 | ColumnrcTengIfInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| 1.3.6.1.4.1.2272.1.50.1.3.1.13 | ColumnrcTengIfInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.14 | ColumnrcTengIfInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.15 | ColumnrcTengIfInUnknownProtos | read-only | current | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For charac… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.16 | ColumnrcTengIfOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.2272.1.50.1.3.1.17 | ColumnrcTengIfOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.19 | ColumnrcTengIfOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.2272.1.50.1.3.1.20 | ColumnrcTengIfOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.2272.1.50.1.4 | TablercTengIfXTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table. |
| 1.3.6.1.4.1.2272.1.50.1.4.1 | RowrcTengIfXEntry | not-accessible | current | An entry containing additional management information applicable to a particular interface. |
| 1.3.6.1.4.1.2272.1.50.1.4.1.1 | ColumnrcTengIfXIndex | read-only | current | A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface su… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.2 | ColumnrcTengIfName | read-only | current | The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use … |
| 1.3.6.1.4.1.2272.1.50.1.4.1.3 | ColumnrcTengIfInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.4 | ColumnrcTengIfInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| 1.3.6.1.4.1.2272.1.50.1.4.1.5 | ColumnrcTengIfOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.2272.1.50.1.4.1.6 | ColumnrcTengIfOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.2272.1.50.1.4.1.7 | ColumnrcTengIfHCInOctets | read-only | current | The total number of octets received on the interface, including framing characters. This object is a 64-bit version of rcTengIfInOctets. |
| 1.3.6.1.4.1.2272.1.50.1.4.1.8 | ColumnrcTengIfHCInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Thi… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.9 | ColumnrcTengIfHCInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.10 | ColumnrcTengIfHCInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.11 | ColumnrcTengIfHCOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of rcTengIfOutOctets. |
| 1.3.6.1.4.1.2272.1.50.1.4.1.12 | ColumnrcTengIfHCOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.13 | ColumnrcTengIfHCOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.2272.1.50.1.4.1.14 | ColumnrcTengIfHCOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.2272.1.50.1.4.1.15 | ColumnrcTengIfLinkUpDownTrapEnable | read-write | current | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which d… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.16 | ColumnrcTengIfHighSpeed | read-only | current | An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface i… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.17 | ColumnrcTengIfPromiscuousMode | read-write | current | This object has a value of false(2) If this interface only accepts packets/frames that are addressed to this station. This object has a value of true(1) when t… |
| 1.3.6.1.4.1.2272.1.50.1.4.1.18 | ColumnrcTengIfConnectorPresent | read-only | current | This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise. |
| 1.3.6.1.4.1.2272.1.50.2 | NodercWisTrap | |||
| 1.3.6.1.4.1.2272.1.50.2.1 | ScalarrcWisSonetTrapType | read-only | current | Used to indicate a particular type of 10GE Sonet trap. |
| 1.3.6.1.4.1.2272.1.50.2.2 | ScalarrcWisSonetTrapIndication | read-only | current | Used to indicate an indication for a 10GE Sonet trap. |
| 1.3.6.1.4.1.2272.1.51 | NodercRec | |||
| 1.3.6.1.4.1.2272.1.51.1 | TablercRecReservTable | not-accessible | current | This table would display the statistics of several HW record type used. This will also let the user reserve certain number of records for each type. |
| 1.3.6.1.4.1.2272.1.51.1.1 | RowrcRecReservTablEntry | not-accessible | current | |
| 1.3.6.1.4.1.2272.1.51.1.1.1 | ColumnrcRecReservRecordType | read-only | current | . |
| 1.3.6.1.4.1.2272.1.51.1.1.2 | ColumnrcRecReservUsed | read-only | current | Displayes the number of HW records actually usee by the recordType. |
| 1.3.6.1.4.1.2272.1.51.1.1.3 | ColumnrcRecReservReserved | read-only | current | Displayes the number of HW records reserved for the recordType. |
| 1.3.6.1.4.1.2272.1.51.1.1.4 | ColumnrcRecReservNewReserved | read-write | current | Displayes the number of HW records that w ill be reserved for this recordType after reset if the configuration is saved. |
| 1.3.6.1.4.1.2272.1.51.1.1.5 | ColumnrcRecReservDefReserved | read-only | current | Number of records reserved for this recordType if loaded with factory default. |
| 1.3.6.1.4.1.2272.1.53 | NodercLacp | |||
| 1.3.6.1.4.1.2272.1.53.1 | NodercLacpGlobal | |||
| 1.3.6.1.4.1.2272.1.53.1.1 | ScalarrcLacpGlobalEnable | read-write | current | globally enable/disable LACP |
| 1.3.6.1.4.1.2272.1.53.1.2 | ScalarrcLacpGlobalSystemPriority | read-write | current | set system priority to all the LACP enabled aggregators and prots |
| 1.3.6.1.4.1.2272.1.53.1.3 | ScalarrcLacpGlobalFastPeriodicTime | read-write | current | The number of miliseconds between periodic transmissions using Short Timeouts. Set this value to all LACP enabled ports. |
| 1.3.6.1.4.1.2272.1.53.1.4 | ScalarrcLacpGlobalSlowPeriodicTime | read-write | current | The number of miliseconds between periodic transmissions using LONG Timeouts. Set this value to all LACP enabled ports. |
| 1.3.6.1.4.1.2272.1.53.1.5 | ScalarrcLacpGlobalTimeoutScale | read-write | current | Scalar value used to calculate timeout time from periodic time. Set this value to all LACP enabled ports. |
| 1.3.6.1.4.1.2272.1.53.1.6 | ScalarrcLacpGlobalAggrWaitTime | read-write | current | The number of mili seconds to delay aggregation to allow multiple links to aggregate simultaneously. |
| 1.3.6.1.4.1.2272.1.53.1.7 | ScalarrcLacpGlobalVlacpEnable | read-write | current | globally enable/disable Virtual LACP |
| 1.3.6.1.4.1.2272.1.53.1.9 | ScalarrcLacpGlobalFastPeriodicTimeOper | read-only | current | The operating value of global fast periodic timer. |
| 1.3.6.1.4.1.2272.1.53.1.10 | ScalarrcLacpGlobalSlowPeriodicTimeOper | read-only | current | The operating value of global show periodic time. |
| 1.3.6.1.4.1.2272.1.53.1.11 | ScalarrcLacpGlobalTimeoutScaleOper | read-only | current | The operating value of global timeout scale. |
| 1.3.6.1.4.1.2272.1.53.1.12 | ScalarrcLacpGlobalAggrWaitTimeOper | read-only | current | The operating value of global aggregate wait time. |
| 1.3.6.1.4.1.2272.1.53.1.13 | ScalarrcLacpGlobalSmltSysId | read-write | current | LACP system ID for SMLT |
| 1.3.6.1.4.1.2272.1.56 | NodercLicense | |||
| 1.3.6.1.4.1.2272.1.56.1 | ScalarrcLicenseNumber | read-only | current | Bit position number of license bitmap |
| 1.3.6.1.4.1.2272.1.56.2 | ScalarrcLicenseBitMap | read-only | current | License bit map. Bitmap number is defined in rcLicenseNumber |
| 1.3.6.1.4.1.2272.1.57 | NodercEap | |||
| 1.3.6.1.4.1.2272.1.60 | NodercFdb | |||
| 1.3.6.1.4.1.2272.1.60.1 | TablercGlobalMacFilterTable | not-accessible | current | A list of Global Mac filter entries. |
| 1.3.6.1.4.1.2272.1.60.1.1 | RowrcGlobalMacFilterEntry | not-accessible | current | this entry is used for global mac filtering.Any Mac address configured here will be discarded globally by the switch. |
| 1.3.6.1.4.1.2272.1.60.1.1.1 | ColumnrcGlobalMacFilterAddress | not-accessible | current | A MAC address which will be discarded globally by the switch |
| 1.3.6.1.4.1.2272.1.60.1.1.2 | ColumnrcGlobalMacFilterRowStatus | read-write | current | Used to create/delete entries in rcGlobalMacFilterTable. |
| 1.3.6.1.4.1.2272.1.62 | NodercIpv6 | |||
| 1.3.6.1.4.1.2272.1.62.1 | NodercIpv6Mib | |||
| 1.3.6.1.4.1.2272.1.62.1.0 | NodercIpv6Notifications | |||
| 1.3.6.1.4.1.2272.1.62.1.1 | NodercIpv6Objects | |||
| 1.3.6.1.4.1.2272.1.62.1.1.1 | NodercIpv6Scalars | |||
| 1.3.6.1.4.1.2272.1.62.1.1.1.1 | ScalarrcIpv6IcmpErrorInterval | read-write | current | The rate (in milliseconds) at which ICMP error messages can be sent out. A value of zero means not be send any. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.3 | ScalarrcIpv6IcmpNetUnreach | read-write | current | Used to set icmp net unreach feature enable/ disable. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.4 | ScalarrcIpv6IcmpRedirectMsg | read-write | current | Used to set icmp redirect feature enable/ disable. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.5 | ScalarrcIpv6IcmpErrorQuota | read-write | current | The number of icmp error messages that can be sent during the icmp error interval. A value of zero means not be send any. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.8 | ScalarrcIpv6PrefixListTableSize | read-only | current | Size of Ipv6 Prefix List Table |
| 1.3.6.1.4.1.2272.1.62.1.1.1.10 | ScalarrcIpv6RouteStaticClear | read-write | current | Clear all IPv6 static routes. |
| 1.3.6.1.4.1.2272.1.62.1.1.1.11 | ScalarrcIpv6RouteStaticGlobalAdminEnabled | read-write | current | Used to globally enable/disable all IPv6 static routes. |
| 1.3.6.1.4.1.2272.1.62.1.1.2 | TablercIpv6InterfaceTable | not-accessible | current | This table contains list of IPv6 interfaces and per-interface IPv6-specific information. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1 | RowrcIpv6InterfaceEntry | not-accessible | current | An entry of ipv6 interface In Table containing per-interface information. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.1 | ColumnrcIpv6InterfaceIfIndex | not-accessible | current | An unique value to identify a physical interface or a logical interface (VLAN). For the brouter port it is the ifindex of the port and in the case of the vlan … |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.2 | ColumnrcIpv6InterfaceIdentifier | read-create | current | IPv6 address interface identifiers. This is a binary string of up to 8 octets in network byte-order. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.3 | ColumnrcIpv6InterfaceIdentifierLength | read-create | current | The length of the Interface Identifier in bits. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.4 | ColumnrcIpv6InterfaceDescr | read-create | current | A textual string containing information about the interface. This string may be set by network management system. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.5 | ColumnrcIpv6InterfaceVlanId | read-create | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.6 | ColumnrcIpv6InterfaceType | read-only | current | The interface type. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.7 | ColumnrcIpv6InterfaceReasmMaxSize | read-create | current | MTU for this IPv6 interface, this value should be same for all the ip addresses defined on this interface. In VSP9000, Supported range for IO interface, suppor… |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.8 | ColumnrcIpv6InterfacePhysAddress | read-only | current | The media-dependent `physical' address, for the ethernet media it is the MAC address |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.9 | ColumnrcIpv6InterfaceAdminStatus | read-create | current | The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its co… |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.10 | ColumnrcIpv6InterfaceOperStatus | read-only | current | Operating status of the interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.11 | ColumnrcIpv6InterfaceReachableTime | read-create | current | The time (in milliseconds) a neighbor is considered reachable after receiving a reachability confirmation. REFERENCE RFC2461, Section 6.3.2 |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.12 | ColumnrcIpv6InterfaceRetransmitTime | read-create | deprecated | Deprecated. Use rcIpv6InterfaceRetransmitTimer instead. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.13 | ColumnrcIpv6InterfaceMulticastAdminStatus | read-create | current | This indicates the admin status for multicast for this interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.14 | ColumnrcIpv6InterfaceRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.15 | ColumnrcIpv6InterfaceDhcpEnabled | read-create | current | Enable or disable DHCP on the specified interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.16 | ColumnrcIpv6InterfaceMacOffset | read-create | current | Used to request a particular MAC for an IPv6 VLAN. The system has 1536 mac addresses, last 4 are reserved for MG. One can either mention a mac offset while con… |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.17 | ColumnrcIpv6InterfaceRetransmitTimer | read-create | current | The time (in milliseconds) between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability … |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.18 | ColumnrcIpv6InterfaceCurHopLimit | read-create | current | The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diamete… |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.20 | ColumnrcIpv6InterfaceClearIcmpStats | read-create | current | Clear ICMP statistics for an interface |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.21 | ColumnrcIpv6InterfaceClearGeneralStats | read-create | current | Clear general statistics for an interface |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.22 | ColumnrcIpv6InterfaceClearNeighborCache | read-create | current | Clear Neighbor Cache for an interface |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.23 | ColumnrcIpv6InterfaceClearDestinationCache | read-create | current | Clear Destination Cache for an interface |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.24 | ColumnrcIpv6InterfaceReversePathCheckEnable | read-create | current | Used to indicate whether this interface should perform Reverse Path Check |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.25 | ColumnrcIpv6InterfaceReversePathCheckMode | read-create | current | Reverse Path Checking mode. |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.26 | ColumnrcIpv6InterfaceForwardingEnabled | read-create | current | Used to indicate whether this interface should perform forwarding |
| 1.3.6.1.4.1.2272.1.62.1.1.2.1.27 | ColumnrcIpv6InterfaceRsmltEnable | read-create | current | Used to indicate whether this interface has rsmlt enabled or not |
| 1.3.6.1.4.1.2272.1.62.1.1.3 | TablercIpv6AddressTable | not-accessible | current | This table contains addressing information relevant to the entity's interfaces. This table does not contain multicast address information. Tables for such info… |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1 | RowrcIpv6AddressEntry | not-accessible | current | An address mapping for a particular interface. Note that when an address is added to an interface the resulted prefix is added to that interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.1 | ColumnrcIpv6AddressIfIndex | not-accessible | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.2 | ColumnrcIpv6AddressAddr | not-accessible | current | The IPv6 address to which this entry's addressing information pertains. This is one of the ipv6 addresses that this interface(identified by the rcIpv6AddressIf… |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.3 | ColumnrcIpv6AddressType | read-write | current | The type of address. It is either unicast or anycast IPv6 addresses (RFC3513). |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.4 | ColumnrcIpv6AddressPrefixLength | read-write | current | Prefix Length value for this address. Cannot be changed after the creation. This field MUST be provided in order to create an entry in this table. |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.5 | ColumnrcIpv6AddressPrefix | read-only | current | A pointer to the row in the prefix table to which this address belongs. May be { 0 0 } if there is no such row. |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.6 | ColumnrcIpv6AddressOrigin | read-only | current | The origin of the address. The origin of the address, one of: other(1),manual(2), dhcp(4),linklayer(5), random(6) |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.7 | ColumnrcIpv6AddressStatus | read-only | current | The status of the address, describing if the address can be used for communication. It will One of: preferred(1), deprecated(2),invalid(3),inaccessible(4),unkn… |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.8 | ColumnrcIpv6AddressCreated | read-only | current | The value of sysUpTime at the time this entry was created. If this entry was created prior to the last re- initialization of the local network management subsy… |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.9 | ColumnrcIpv6AddressLastChanged | read-only | current | The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management … |
| 1.3.6.1.4.1.2272.1.62.1.1.3.1.10 | ColumnrcIpv6AddressRowStatus | read-create | current | The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be mod… |
| 1.3.6.1.4.1.2272.1.62.1.1.4 | TablercIpv6PrefixTable | not-accessible | current | This table allows the user to determine the source of an IP address or set of IP addresses and allows other tables to share the information via pointer rather … |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1 | RowrcIpv6PrefixEntry | not-accessible | current | An entry of ipv6 prefix In the Table. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.1 | ColumnrcIpv6PrefixIfIndex | not-accessible | current | An unique value to identify an ipv6 interface. For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.2 | ColumnrcIpv6PrefixAddr | not-accessible | current | Prefix to create an ipv6 address in ipv6 interface table. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.3 | ColumnrcIpv6PrefixLength | not-accessible | current | Mask to create an ipv6 prefix entry either will be advertised or suppressed |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.4 | ColumnrcIpv6PrefixVlanId | read-only | current | A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.5 | ColumnrcIpv6PrefixUseDefaultVal | read-write | current | Select one of the value to set/use it's value to default value. This is a bitmask field, setting all the bits means that all the options will be reverted to de… |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.8 | ColumnrcIpv6PrefixAtValidLife | read-write | current | Is the date and time, upon reaching this value the prefix will be expired, if configured this option will be included in the neighbor advertisement for this pr… |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.9 | ColumnrcIpv6PrefixAtPreferredLife | read-write | current | Is the date and time, upon reaching this value the prefix will be expired, if configured this option will be included in the neighbor advertisement for this pr… |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.10 | ColumnrcIpv6PrefixInfinite | read-write | current | if set the prefix's valid lifetime will not exprie. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.11 | ColumnrcIpv6PrefixOnLinkFlag | read-write | current | if set then this prefix can be used for onlink determination. This value be placed in the L-bit field in the prefix information option. It is a 1 bit flag. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.12 | ColumnrcIpv6PrefixAutoFlag | read-write | current | if set then this prefix can be used for autonomous address config. This value be placed in the auto-flag field in the prefix information option. It is a 1 bit … |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.13 | ColumnrcIpv6PrefixAddressEui | read-write | current | Use an EUI-64 interface ID in the low-order 64bits of the address when not specified in the address field. If enabled use EUI, otherwise use EUI-64 and complem… |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.14 | ColumnrcIpv6PrefixNoAdvertise | read-write | current | if set then this prefix can not be included in the neighbor advertisement. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.15 | ColumnrcIpv6PrefixRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.16 | ColumnrcIpv6PrefixValidLifetime | read-create | current | Valid lifetime in seconds, indicates how long this prefix advertised in the nbr advertisement is valid. Value of 4294967295 represents infinity. |
| 1.3.6.1.4.1.2272.1.62.1.1.4.1.17 | ColumnrcIpv6PrefixPreferredLifetime | read-create | current | Preferred lifetime in seconds, indicates how long this prefix advertised in advertisemt for this prefix. Value of 4294967295 represents infinity. |
| 1.3.6.1.4.1.2272.1.62.1.1.5 | TablercIpv6RouterAdvertTable | not-accessible | current | The table containing information used to construct router advertisements. |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1 | RowrcIpv6RouterAdvertEntry | not-accessible | current | An entry containing information used to construct router advertisements. |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.1 | ColumnrcIpv6RouterAdvertIfIndex | not-accessible | current | An unique value to identify an ipv6 interface. For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of the vlan. |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.2 | ColumnrcIpv6RouterAdvertSendAdverts | read-write | current | A flag indicating whether or not the router sends periodic router advertisements and responds to router solicitations on this interface. REFERENCE RFC2461 Sect… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.3 | ColumnrcIpv6RouterAdvertUseDefaultVal | read-write | current | Select one of the value to set/use it's value to default value, or set all the bits to indicate all the options will be set to their default value. |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.4 | ColumnrcIpv6RouterAdvertMaxInterval | read-write | current | Configure the max interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 4 seconds and n… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.5 | ColumnrcIpv6RouterAdvertMinInterval | read-write | current | Configure the min interval (in seconds) at which the transmission of route advertisments can occur on this interface. This must be no less than 3 seconds and n… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.6 | ColumnrcIpv6RouterAdvertReachableTime | read-write | current | The value (in milliseconds) to be placed in the router advertisement message sent by the router. The value zero means unspecified (by this router). Used to con… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.7 | ColumnrcIpv6RouterAdvertRetransmitTimer | read-only | deprecated | The value (in milliseconds) to be placed in the retransmit timer field in router advertisement message sent from this interface. The value zero means unspecifi… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.8 | ColumnrcIpv6RouterAdvertDefaultLifeTime | read-write | current | The value to be placed in the router lifetime field of router advertisements sent from this interface. This value MUST be either 0 or between rcIpv6RouterAdver… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.9 | ColumnrcIpv6RouterAdvertCurHopLimit | read-write | current | The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diamete… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.10 | ColumnrcIpv6RouterAdvertManagedFlag | read-write | current | if true then the M-bit(Managed address configureation) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1 |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.11 | ColumnrcIpv6RouterAdvertOtherConfigFlag | read-write | current | if true then the O-bit (Other stateful Configuration) in the router adverisement will be set. REFERENCE RFC2461 Section 6.2.1 |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.12 | ColumnrcIpv6RouterAdvertDadNsNum | read-write | current | The number of neighbor solicitation messages for DAD (Duplicate address detection). A value 0 is used to disable DAD process on this interface. A value 1 is us… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.13 | ColumnrcIpv6RouterAdvertLinkMTU | read-write | current | The value to be placed in MTU options sent by the router on this interface. A value of zero indicates that no MTU options are sent. REFERENCE RFC2461 Section 6… |
| 1.3.6.1.4.1.2272.1.62.1.1.5.1.14 | ColumnrcIpv6RouterAdvertRetransmitTime | read-write | current | The value (in milliseconds) to be placed in the retransmit timer field in router advertisement message sent from this interface. The value zero means unspecifi… |
| 1.3.6.1.4.1.2272.1.62.1.1.6 | TablercIpv6StaticRouteTable | not-accessible | current | This table contains list of routes that are created by the user to destination networks. |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1 | RowrcIpv6StaticRouteEntry | not-accessible | current | An entry in the static route table for IPv6 can be created for a destination with a specific prefix length; multiple entries to the same destination are create… |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.1 | ColumnrcIpv6StaticRouteDest | not-accessible | current | The destination IPv6 address of this route. The values for the index objects rcIpv6StaticRouteDest and rcIpv6StaticRoutePrefixLength must be consistent. When t… |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.2 | ColumnrcIpv6StaticRoutePrefixLength | not-accessible | current | Indicates the number of leading one bits which form the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpv6S… |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.3 | ColumnrcIpv6StaticRouteNextHop | not-accessible | current | Next hop IPv6 address for this destination. On remote routes, the address of the next system en route. For non-remote routes, a zero length string. |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.4 | ColumnrcIpv6StaticRouteIfIndex | not-accessible | current | The ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the sce… |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.5 | ColumnrcIpv6StaticRouteDistance | read-write | current | cost/distance to reach the destination for this node. |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.6 | ColumnrcIpv6StaticRouteStatus | read-only | current | (1)notReachable means the route is not reachable and no neighbor request entry is built to resolved the next-hop. It happens when there is no route or neighbor… |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.7 | ColumnrcIpv6StaticRoutePreference | read-write | current | Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest pref… |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.8 | ColumnrcIpv6StaticRouteEnable | read-write | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.6.1.9 | ColumnrcIpv6StaticRouteRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.62.1.1.7 | TablercIpv6NetToPhysicalTable | not-accessible | current | The IP Address Translation table used for mapping from IP addresses to physical addresses. The Address Translation tables contain the IP address to 'physical' … |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1 | RowrcIpv6NetToPhysicalEntry | not-accessible | current | Each entry contains one IP address to `physical' address equivalence. |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.1 | ColumnrcIpv6NetToPhysicalIfIndex | not-accessible | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.2 | ColumnrcIpv6NetToPhysicalNetAddress | not-accessible | current | The IP Address corresponding to the media-dependent `physical' address. The address type of this object is specified in rcIpv6NetToPhysicalAddressType. Impleme… |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.3 | ColumnrcIpv6NetToPhysicalPhysAddress | read-write | current | The media-dependent `physical' address. As the entries in this table are typically not persistent when this object is written the entity SHOULD NOT save the ch… |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.4 | ColumnrcIpv6NetToPhysicalInterface | read-write | current | The field represents either a physical port id or the MLT port id. This entry is associated either with a port or with a MLT in a VLAN/Brouter port. If the val… |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.5 | ColumnrcIpv6NetToPhysicalLastUpdated | read-only | current | The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management … |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.6 | ColumnrcIpv6NetToPhysicalType | read-write | current | The type of mapping. The 'dynamic(2)' type indicates that the IP address to physical addresses mapping has been dynamically resolved using e.g. IPv4 ARP or the… |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.8 | ColumnrcIpv6NetToPhysicalState | read-only | current | The Neighbor Unreachability Detection [4] state for the interface when the address mapping in this entry is used. If Neighbor Unreachability Detection is not i… |
| 1.3.6.1.4.1.2272.1.62.1.1.7.1.9 | ColumnrcIpv6NetToPhysicalRowStatus | read-create | current | The status of this conceptual row. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be mod… |
| 1.3.6.1.4.1.2272.1.62.1.1.8 | TablercIpv6PrefixListTable | not-accessible | current | IPv6 Prefix List table |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1 | RowrcIpv6PrefixListEntry | not-accessible | current | An entry of Ipv6 Prefix List Table. |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.1 | ColumnrcIpv6PrefixListId | not-accessible | current | Id of an IPv6 Prefix List |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.2 | ColumnrcIpv6PrefixListPrefix | not-accessible | current | Is a member of a specific ipv6 prefix list. Adding the prefix to the given ipv6 prefix list |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.3 | ColumnrcIpv6PrefixListPrefixMaskLen | not-accessible | current | Mask length of the ipv6 prefix added to the prefix list |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.4 | ColumnrcIpv6PrefixListMaskLenFrom | read-create | current | Lower bound of mask length of the ipv6 prefix added to the prefix list |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.5 | ColumnrcIpv6PrefixListMaskLenUpto | read-create | current | Higher bound of mask length of the ipv6 prefix added to the prefix list |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.6 | ColumnrcIpv6PrefixListName | read-create | current | Name of the Ipv6 prefix list |
| 1.3.6.1.4.1.2272.1.62.1.1.8.1.7 | ColumnrcIpv6PrefixListRowStatus | read-create | current | Used to create/delete entries in the ipv6 prefix list table |
| 1.3.6.1.4.1.2272.1.62.1.1.9 | TablercIpv6ConfDhcpRelayTable | not-accessible | current | DHCP Relay for Ipv6 configuration table |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1 | RowrcIpv6ConfDhcpRelayEntry | not-accessible | current | Used to configure DHCP on a particular L3 interface. An entry is created automatically when the variable rcIpv6InterfaceDhcpEnabled is set to TRUE. Once create… |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1.1 | ColumnrcIpv6ConfDhcpIfIndex | not-accessible | current | Interface number. The number can represent either a physical or logical(VLAN) interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1.2 | ColumnrcIpv6ConfDhcpMaxHop | read-write | current | Used to indicate the maximum number of hops a DHCP packet can take from the source device to the destination device (i.e., DHCP client to DHCP server). |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1.3 | ColumnrcIpv6ConfDhcpRemoteIdEnabled | read-write | current | Used to indicate if remote-id option is enabled. |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1.4 | ColumnrcIpv6ConfDhcpNumRequests | read-only | current | The total number of DHCP requests seen on this interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1.5 | ColumnrcIpv6ConfDhcpNumReplies | read-only | current | The total number of DHCP replies seen on this interface. |
| 1.3.6.1.4.1.2272.1.62.1.1.9.1.6 | ColumnrcIpv6ConfDhcpRowStatus | read-write | current | An entry is created automatically when the variable rcIpv6InterfaceDhcpEnabled is set to TRUE. Once created this entry will only be deleted if the rcIpv6ConfDh… |
| 1.3.6.1.4.1.2272.1.62.1.1.10 | TablercIpv6DhcpForwardTable | not-accessible | current | DHCP Relay forwarding table. |
| 1.3.6.1.4.1.2272.1.62.1.1.10.1 | RowrcIpv6DhcpForwardEntry | not-accessible | current | An entry used represents a DHCP Relayed message forwarding directive. |
| 1.3.6.1.4.1.2272.1.62.1.1.10.1.1 | ColumnrcIpv6DhcpForwardAgentAddr | not-accessible | current | The IP address configured on an interface (i.e., a locally configured IP address). |
| 1.3.6.1.4.1.2272.1.62.1.1.10.1.2 | ColumnrcIpv6DhcpForwardServerAddr | not-accessible | current | The IP address of the DHCP server. If this IP address corresponds to a local interface address, the DHCP packet is multicast out the interface the IP address i… |
| 1.3.6.1.4.1.2272.1.62.1.1.10.1.3 | ColumnrcIpv6DhcpForwardEnabled | read-write | current | Used to indicate whether the entry should be used. |
| 1.3.6.1.4.1.2272.1.62.1.1.10.1.4 | ColumnrcIpv6DhcpForwardRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.12 | TablercIpv6MgmtPortStaticRouteTable | not-accessible | current | This table contains list of routes that are created by the user to destination networks on the management port. |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1 | RowrcIpv6MgmtPortStaticRouteEntry | not-accessible | current | An entry in the static route table for IPv6 can be created for a destination with a specific prefix length; multiple entries to the same destination are create… |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.1 | ColumnrcIpv6MgmtPortStaticRouteIfIndex | not-accessible | current | The ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the sce… |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.2 | ColumnrcIpv6MgmtPortStaticRouteDest | not-accessible | current | The destination IPv6 address of this route. The values for the index objects rcIpv6StaticRouteDest and rcIpv6StaticRoutePrefixLength must be consistent. When t… |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.3 | ColumnrcIpv6MgmtPortStaticRoutePrefixLength | not-accessible | current | Indicates the number of leading one bits which form the mask to be logical-ANDed with the destination address before being compared to the value in the rcIpv6M… |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.4 | ColumnrcIpv6MgmtPortStaticRouteNextHop | not-accessible | current | Next hop IPv6 address for this destination. On remote routes, the address of the next system en route. For non-remote routes, a zero length string. |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.5 | ColumnrcIpv6MgmtPortStaticRouteDistance | read-create | current | cost/distance to reach the destination for this node. |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.6 | ColumnrcIpv6MgmtPortStaticRouteStatus | read-only | current | (1)notReachable means the route is not reachable and no neighbor request entry is built to resolved the next-hop. It happens when there is no route or neighbor… |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.7 | ColumnrcIpv6MgmtPortStaticRoutePreference | read-create | current | Used to indicate the route preference of this entry. If there are more than one route that can be used to forward IP traffic, the route that has a highest pref… |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.8 | ColumnrcIpv6MgmtPortStaticRouteEnable | read-create | current | Used to enable/disable this entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.12.1.9 | ColumnrcIpv6MgmtPortStaticRouteRowStatus | read-create | current | Row status for create/delete. |
| 1.3.6.1.4.1.2272.1.62.1.1.13 | TablercIpv6DestinationCacheTable | not-accessible | current | Ipv6 Destination Cache table |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1 | RowrcIpv6DestinationCacheEntry | not-accessible | current | Used to display Destination Cache |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.1 | ColumnrcIpv6DCacheDestAddr | not-accessible | current | IPv6 Destination Address from the Destination Cache. |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.2 | ColumnrcIpv6DCacheIfIndex | not-accessible | current | The last 16 bits of this object's value are interpreted as InterfaceIndex (it can represent either a physical, or a VLAN, or a tunnel interface); the first 16 … |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.3 | ColumnrcIpv6DCacheNextHop | read-only | current | Ipv6 Next Hop for a Destination Cache entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.4 | ColumnrcIpv6DCacheIfType | read-only | current | Interface type; it can be a real (i.e. VLAN, brouter, tunnel) or a virtual circuit (i.e. VRRP, RSMLT). |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.5 | ColumnrcIpv6DCacheIfData | read-only | current | Used to display additional information about virtual circuits (i.e. if it is a VRRP or RSMLT circuit, the vrId if it is a VRRP circuit); no information is disp… |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.6 | ColumnrcIpv6DCachePmtu | read-only | current | Path MTU for the entry. |
| 1.3.6.1.4.1.2272.1.62.1.1.13.1.7 | ColumnrcIpv6DCachePmtuAge | read-only | current | Indicates how much time (in seconds) has passed since the PMTU was updated the last time. |
| 1.3.6.1.4.1.2272.1.63 | NodercIsis | |||
| 1.3.6.1.4.1.2272.1.63.1 | NodercIsisGlobalGroup | |||
| 1.3.6.1.4.1.2272.1.63.1.1 | ScalarrcIsisGlobalAreaAuthType | read-write | current | The authentication type for the area |
| 1.3.6.1.4.1.2272.1.63.1.2 | ScalarrcIsisGlobalAreaKeyId | read-write | current | Authentication key-id for the area. This is required if the auth-type is hmac-md5 else it is not required. |
| 1.3.6.1.4.1.2272.1.63.1.3 | ScalarrcIsisGlobalAreaAuthKey | read-write | current | Authentication key, this key will be used to authenticate the LSP's received on the area |
| 1.3.6.1.4.1.2272.1.63.1.4 | ScalarrcIsisGlobalDomainAuthType | read-write | current | The authentication type for the domain |
| 1.3.6.1.4.1.2272.1.63.1.5 | ScalarrcIsisGlobalDomainKeyId | read-write | current | The authentication key-id for the domain. This is required if the auth-type is hmac-md5 else it is not required. |
| 1.3.6.1.4.1.2272.1.63.1.6 | ScalarrcIsisGlobalDomainAuthKey | read-write | current | Authentication key, this key will be used to authenticate the LSP's received on the domain |
| 1.3.6.1.4.1.2272.1.63.1.7 | ScalarrcIsisGlobalCsnpInt | read-write | current | Interval of time, in seconds, between periodic transmission of a complete set of CSNPs on multiaccess networks if this router is the designated router at this … |
| 1.3.6.1.4.1.2272.1.63.1.8 | ScalarrcIsisGlobalRxmtLspInt | read-write | current | Minimum interval, in seconds, between re-transmission of a LSP at this level. This object follows the resettingTimer behavior. For ResettingTimer description s… |
| 1.3.6.1.4.1.2272.1.63.1.9 | ScalarrcIsisGlobalPSNPInterval | read-write | current | Minimum interval in seconds between sending Partial Sequence Number PDUs at this level. This object follows the resettingTimer behavior. For ResettingTimer des… |
| 1.3.6.1.4.1.2272.1.63.1.10 | ScalarrcIsisGlobalHostName | read-write | current | The hostname listed in LSP, or the system name if host name is not configured. |
| 1.3.6.1.4.1.2272.1.63.1.11 | ScalarrcIsisGlobalSpfDelay | read-write | current | ISIS SPF delay in miliseconds |
| 1.3.6.1.4.1.2272.1.63.1.12 | ScalarrcIsisGlobalControlVlan | read-write | current | ISIS control vlan ID |
| 1.3.6.1.4.1.2272.1.63.1.13 | ScalarrcIsisGlobalIpSourceAddress | read-write | current | ISIS PLSB IP address. Define an existing router interface for management (ping/traceroute) |
| 1.3.6.1.4.1.2272.1.63.1.14 | ScalarrcIsisGlobalIpSourceAddressType | read-write | current | The type of address for existing router interface for management (ping/traceroute) |
| 1.3.6.1.4.1.2272.1.63.2 | TablercIsisCircuitTable | not-accessible | current | Table of IS-IS Circuit, this is extension to the isisCircTable defined in ISIS MIB |
| 1.3.6.1.4.1.2272.1.63.2.1 | RowrcIsisCircuitEntry | not-accessible | current | An entry of rcIsisCircuit Table. A Entry in table exists for each ISIS circuit created |
| 1.3.6.1.4.1.2272.1.63.2.1.1 | ColumnrcIsisCircuitIndex | not-accessible | current | The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need… |
| 1.3.6.1.4.1.2272.1.63.2.1.2 | ColumnrcIsisCircuitType | read-write | current | ISIS circuit type this is an extention to ISIS circuit table, this was required a standard MIB circuit type does not support passive type |
| 1.3.6.1.4.1.2272.1.63.2.1.3 | ColumnrcIsisCircuitAuthType | read-write | current | Authentication type for IIH to be sent/reveived on the circuit/interface |
| 1.3.6.1.4.1.2272.1.63.2.1.4 | ColumnrcIsisCircuitKeyId | read-write | current | Authentication key id related to IIH key This can be set only if the auth-type is hmac-md5 |
| 1.3.6.1.4.1.2272.1.63.2.1.5 | ColumnrcIsisCircuitAuthKey | read-write | current | Authentication key to be used to authenticate IIH sent/reveived on the circuit/interface |
| 1.3.6.1.4.1.2272.1.63.2.1.6 | ColumnrcIsisCircuitAddr | read-only | current | IP address associated with the interface |
| 1.3.6.1.4.1.2272.1.63.2.1.7 | ColumnrcIsisCircuitMask | read-only | current | IP mask associated with the interface |
| 1.3.6.1.4.1.2272.1.63.2.1.8 | ColumnrcIsisCircuitOperState | read-only | current | This variable tells the operating state of circ |
| 1.3.6.1.4.1.2272.1.63.2.1.9 | ColumnrcIsisCircuitNumAdj | read-only | current | NUmber of adjacencies |
| 1.3.6.1.4.1.2272.1.63.2.1.10 | ColumnrcIsisCircuitNumUpAdj | read-only | current | Number of adjancencies which are UP |
| 1.3.6.1.4.1.2272.1.63.3 | NodercIsisStats | |||
| 1.3.6.1.4.1.2272.1.63.3.1 | ScalarrcIsisStatsClearErrorCounters | read-write | current | Clear ISIS global and interface error counters. |
| 1.3.6.1.4.1.2272.1.63.3.2 | ScalarrcIsisStatsClearPacketCounters | read-write | current | Clear IS-IS control packets sent and received at each level on all the interface/circuits. |
| 1.3.6.1.4.1.2272.1.63.4 | TablercIsisPlsbTable | not-accessible | current | Table of PLSB under IS-IS |
| 1.3.6.1.4.1.2272.1.63.4.1 | RowrcIsisPlsbEntry | not-accessible | current | An entry of rcIsisPlsb Table. A Entry in table exists for each plsb instance created |
| 1.3.6.1.4.1.2272.1.63.4.1.1 | ColumnrcIsisPlsbId | not-accessible | current | PLSB instance ID |
| 1.3.6.1.4.1.2272.1.63.4.1.2 | ColumnrcIsisPlsbRowStatus | read-create | current | The state of the rcIsisPlsbEntry. |
| 1.3.6.1.4.1.2272.1.63.4.1.3 | ColumnrcIsisPlsbNodeNickName | read-create | current | PLSB node's nickname is used to calculate ISID multicast mac address. |
| 1.3.6.1.4.1.2272.1.63.4.1.4 | ColumnrcIsisPlsbVlans | read-create | current | PLSB ISIS vlans for a PLSB instance. |
| 1.3.6.1.4.1.2272.1.63.4.1.5 | ColumnrcIsisPlsbLsdbTrap | read-create | current | isis PLSB lsdb update trap enable on this plsb instance |
| 1.3.6.1.4.1.2272.1.63.4.1.6 | ColumnrcIsisPlsbState | read-create | current | enable/disable PLSB. |
| 1.3.6.1.4.1.2272.1.63.4.1.7 | ColumnrcIsisPlsbIpShortcut | read-create | current | ISIS PLSB IP shortcut enabled |
| 1.3.6.1.4.1.2272.1.63.4.1.8 | ColumnrcIsisPlsbPrimaryVlan | read-create | current | Primary Vlan Id for this plsb instance. |
| 1.3.6.1.4.1.2272.1.63.4.1.9 | ColumnrcIsisPlsbSmltSplitBEB | read-only | current | ISIS PLSB SMLT split BEB for this plsb instance. |
| 1.3.6.1.4.1.2272.1.63.4.1.10 | ColumnrcIsisPlsbSmltBmac | read-create | current | ISIS PLSB SMLT virtual MAC for this plsb instance. |
| 1.3.6.1.4.1.2272.1.63.4.1.11 | ColumnrcIsisPlsbSmltPeerSysId | read-create | current | ISIS PLSB SMLT Peer's system-id for this plsb instance. |
| 1.3.6.1.4.1.2272.1.63.5 | TablercIsisCircuitPlsbTable | not-accessible | current | Table of IS-IS Circuit PLSB instance |
| 1.3.6.1.4.1.2272.1.63.5.1 | RowrcIsisCircuitPlsbEntry | not-accessible | current | An entry of rcIsisCircuitPlsb Table. A Entry in table exists for each PLSB instance under a ISIS circuit created |
| 1.3.6.1.4.1.2272.1.63.5.1.1 | ColumnrcIsisCircuitPlsbIndex | not-accessible | current | The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need… |
| 1.3.6.1.4.1.2272.1.63.5.1.2 | ColumnrcIsisCircuitPlsbId | not-accessible | current | PLSB instance ID |
| 1.3.6.1.4.1.2272.1.63.5.1.3 | ColumnrcIsisCircuitPlsbRowStatus | read-create | current | The state of the rcIsisCircuitPlsbEntry. |
| 1.3.6.1.4.1.2272.1.63.5.1.4 | ColumnrcIsisCircuitPlsbState | read-create | current | PLSB functionality enable on this Plsb instance at this port |
| 1.3.6.1.4.1.2272.1.63.5.1.5 | ColumnrcIsisCircuitPlsbType | read-create | current | ISIS circuit type this is an extention to ISIS circuit table, this was required a standard MIB circuit type does not support passive type |
| 1.3.6.1.4.1.2272.1.63.5.1.6 | ColumnrcIsisCircuitPlsbL1Metric | read-create | current | The metric value of this circuit for this level. |
| 1.3.6.1.4.1.2272.1.63.5.1.7 | ColumnrcIsisCircuitPlsbWideL1Metric | read-create | current | The metric value of this circuit for this level. |
| 1.3.6.1.4.1.2272.1.63.9 | NodercIsisTrap | |||
| 1.3.6.1.4.1.2272.1.63.9.1 | ScalarrcIsisLocalLspId | read-only | current | The 8 byte Local LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number. |
| 1.3.6.1.4.1.2272.1.63.9.2 | ScalarrcIsisLocall1Metric | read-only | current | l1-metric for ISIS interface on local Node. |
| 1.3.6.1.4.1.2272.1.63.9.3 | ScalarrcIsisNgbLspId | read-only | current | The 8 byte neighbor LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number. |
| 1.3.6.1.4.1.2272.1.63.9.4 | ScalarrcIsisNgbl1Metric | read-only | current | l1-metric for ISIS interface on neighbor Node. |
| 1.3.6.1.4.1.2272.1.63.9.5 | ScalarrcIsisPlsbTrapType | read-only | current | |
| 1.3.6.1.4.1.2272.1.63.9.6 | ScalarrcIsisLocalSysId | read-only | current | ISIS local node system-id. |
| 1.3.6.1.4.1.2272.1.63.9.7 | ScalarrcIsisLocalInterface | read-only | current | ISIS local interface index. |
| 1.3.6.1.4.1.2272.1.63.9.8 | ScalarrcIsisTrapIndicator | read-only | current | indicates that an alarm has been Raised, or an alarm has been cleared. |
| 1.3.6.1.4.1.2272.1.63.9.9 | ScalarrcIsisLocalNickname | read-only | current | ISIS local node nick-name. |
| 1.3.6.1.4.1.2272.1.63.9.10 | ScalarrcIsisNgbNickname | read-only | current | ISIS neighbor node nick-name. |
| 1.3.6.1.4.1.2272.1.63.9.11 | ScalarrcIsisNgbSysId | read-only | current | ISIS neighbor node system-id. |
| 1.3.6.1.4.1.2272.1.63.9.12 | ScalarrcIsisLocalPrimaryBvid | read-only | current | ISIS local primary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.13 | ScalarrcIsisLocalPrimaryTieBrkAlg | read-only | current | The tie breaking algorithm applied to local primary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.14 | ScalarrcIsisLocalSecondaryBvid | read-only | current | ISIS local secondary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.15 | ScalarrcIsisLocalSecondaryTieBrkAlg | read-only | current | The tie breaking algorithm applied to local seconday B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.16 | ScalarrcIsisNgbPrimaryBvid | read-only | current | ISIS neighbor primary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.17 | ScalarrcIsisNgbPrimaryTieBrkAlg | read-only | current | The neighbor tie breaking algorithm applied to primary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.18 | ScalarrcIsisNgbSecondaryBvid | read-only | current | ISIS neighbor secondary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.19 | ScalarrcIsisNgbSecondaryTieBrkAlg | read-only | current | The neighbor tie breaking algorithm applied to secondary B-VID. |
| 1.3.6.1.4.1.2272.1.63.9.20 | ScalarrcIsisLocalVirtualBmac | read-only | current | The SMLT Virtual BMAC configured in the local IST switch. |
| 1.3.6.1.4.1.2272.1.63.9.21 | ScalarrcIsisPeerVirtualBmac | read-only | current | The SMLT Virtual BMAC configured in the IST Peer. |
| 1.3.6.1.4.1.2272.1.63.9.22 | ScalarrcIsisSysId | read-only | current | The isis system id configured in the local switch or IST peer. |
| 1.3.6.1.4.1.2272.1.63.9.23 | ScalarrcIsisSmltPeerSysId | read-only | current | The SMLT Peer system-id configured in the local switch or IST Peer. |
| 1.3.6.1.4.1.2272.1.63.9.24 | ScalarrcIsisAdjState | read-only | current | indicate different ISIS adjacency states. |
| 1.3.6.1.4.1.2272.1.63.9.25 | ScalarrcIsisDuplicateNnameCounter | read-only | current | indicate how many nodes in the network share the nick-name. |
| 1.3.6.1.4.1.2272.1.63.9.26 | ScalarrcIsisLocalBvidCounter | read-only | current | indicate how many b-vid configured on local nodes. |
| 1.3.6.1.4.1.2272.1.63.9.27 | ScalarrcIsisNgbBvidCounter | read-only | current | indicate how many b-vid configured on a neighbor nodes. |
| 1.3.6.1.4.1.2272.1.63.9.28 | ScalarrcIsisLocalSmltSplitBeb | read-only | current | The SMLT Split-BEB configured in the local IST switch. |
| 1.3.6.1.4.1.2272.1.63.9.29 | ScalarrcIsisPeerSmltSplitBeb | read-only | current | The SMLT Split-BEB configured in the IST Peer switch. |
| 1.3.6.1.4.1.2272.1.63.9.30 | ScalarrcIsisLocalHostName | read-only | current | ISIS local host name. |
| 1.3.6.1.4.1.2272.1.63.9.31 | ScalarrcIsisNgbHostName | read-only | current | ISIS neighbor host name. |
| 1.3.6.1.4.1.2272.1.63.9.32 | ScalarrcIsisPrevInterface | read-only | current | ISIS local interface index for previously found adj. |
| 1.3.6.1.4.1.2272.1.63.10 | TablercIsisAdjTable | not-accessible | current | Table of IS-IS Adjacency, this is extension to the isisISAdjTable defined in ISIS MIB |
| 1.3.6.1.4.1.2272.1.63.10.1 | RowrcIsisAdjEntry | not-accessible | current | An entry of rcIsisAdj Table. A Entry in table exists for each ISIS adjacency |
| 1.3.6.1.4.1.2272.1.63.10.1.1 | ColumnrcIsisAdjCircIndex | not-accessible | current | The identifier of this circuit, unique within the Intermediate System. This object follows the index behavior. This is for SNMP Indexing purposes only and need… |
| 1.3.6.1.4.1.2272.1.63.10.1.2 | ColumnrcIsisAdjIndex | not-accessible | current | A unique value identifying the IS adjacency from all other such adjacencies on this circuit. This value is automatically assigned by the system when the adjace… |
| 1.3.6.1.4.1.2272.1.63.10.1.3 | ColumnrcIsisAdjHostName | read-only | current | The hostname listed in LSP, or the system name if host name is not configured. |
| 1.3.6.1.4.1.2272.1.63.10.1.4 | ColumnrcIsisAdjIfIndex | read-only | current | The value of ifIndex for the interface to which this circuit corresponds. |
| 1.3.6.1.4.1.2272.1.63.11 | TablercIsisLSPTable | not-accessible | current | Table of IS-IS LSP, this is extension to the isisLSPSummaryTable defined in ISIS MIB |
| 1.3.6.1.4.1.2272.1.63.11.1 | RowrcIsisLSPEntry | not-accessible | current | An entry of rcIsisLSP Table. A Entry in table exists for each ISIS LSP |
| 1.3.6.1.4.1.2272.1.63.11.1.1 | ColumnrcIsisLSPLevel | not-accessible | current | At which level does this LSP appear? |
| 1.3.6.1.4.1.2272.1.63.11.1.2 | ColumnrcIsisLSPID | not-accessible | current | The 8 byte LSP ID, consisting of the SystemID, Circuit ID, and Fragment Number. |
| 1.3.6.1.4.1.2272.1.63.11.1.3 | ColumnrcIsisLSPSeq | read-only | current | The sequence number for this LSP. |
| 1.3.6.1.4.1.2272.1.63.11.1.4 | ColumnrcIsisLSPHostName | read-only | current | The hostname listed in LSP, or the system name if host name is not configured. |
| 1.3.6.1.4.1.2272.1.63.11.1.5 | ColumnrcIsisLSPNickName | read-only | current | PLSB node's nickname |
| 1.3.6.1.4.1.2272.1.63.11.1.6 | ColumnrcIsisLSPLifetimeRemain | read-only | current | The remaining lifetime in seconds for this LSP. |
| 1.3.6.1.4.1.2272.1.63.12 | TablercIsisPlsbIpUnicastFibTable | not-accessible | current | Table of IS-IS PLSB IP Unicast FIB |
| 1.3.6.1.4.1.2272.1.63.12.1 | RowrcIsisPlsbIpUnicastFibEntry | not-accessible | current | An entry of rcIsisPlsbIpUnicastFib Table. A Entry in table exists for each PLSB IP unicast forwarding entry. |
| 1.3.6.1.4.1.2272.1.63.12.1.1 | ColumnrcIsisPlsbIpUnicastFibVrfId | not-accessible | current | VRF ID of the IP unicast FIB entry, 0 indicates NRE. |
| 1.3.6.1.4.1.2272.1.63.12.1.2 | ColumnrcIsisPlsbIpUnicastFibDestinationIpAddrType | not-accessible | current | The address type of destination IP Address. |
| 1.3.6.1.4.1.2272.1.63.12.1.3 | ColumnrcIsisPlsbIpUnicastFibDestinationIpAddr | not-accessible | current | Destination IP Address of the IP unicast FIB entry. Support ipv4 size(4) and ipv6 size(16) |
| 1.3.6.1.4.1.2272.1.63.12.1.4 | ColumnrcIsisPlsbIpUnicastFibDestinationMask | not-accessible | current | Destination IP mask of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.12.1.5 | ColumnrcIsisPlsbIpUnicastFibNextHopBmac | not-accessible | current | the nexthop BMAC of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.12.1.6 | ColumnrcIsisPlsbIpUnicastFibVlan | not-accessible | current | Vlan of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.12.1.7 | ColumnrcIsisPlsbIpUnicastFibIsid | read-only | current | ISID of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.12.1.8 | ColumnrcIsisPlsbIpUnicastFibNextHopName | read-only | current | the nexthop hostname of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.12.1.9 | ColumnrcIsisPlsbIpUnicastFibOutgoingPort | read-only | current | Outgoing port of the IP unicast Fib entry. |
| 1.3.6.1.4.1.2272.1.63.12.1.10 | ColumnrcIsisPlsbIpUnicastFibPrefixCost | read-only | current | prefix cost of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.12.1.11 | ColumnrcIsisPlsbIpUnicastFibSpbmCost | read-only | current | bmac cost of the IP unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.13 | TablercIsisPlsbUcastFibTable | not-accessible | current | Table of IS-IS PLSB Unicast FIB |
| 1.3.6.1.4.1.2272.1.63.13.1 | RowrcIsisPlsbUcastFibEntry | not-accessible | current | An entry of rcIsisPlsbUcastFib Table. A Entry in table exists for each PLSB unicast forwarding entry generated by ISIS SPF computation |
| 1.3.6.1.4.1.2272.1.63.13.1.1 | ColumnrcIsisPlsbUcastFibSysId | not-accessible | current | System ID of the node where unicast FIB entry come from |
| 1.3.6.1.4.1.2272.1.63.13.1.2 | ColumnrcIsisPlsbUcastFibVlan | not-accessible | current | Vlan of the unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.13.1.3 | ColumnrcIsisPlsbUcastFibDestinationMacAddr | not-accessible | current | Destination Mac Address of the unicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.13.1.4 | ColumnrcIsisPlsbUcastFibOutgoingPort | read-only | current | Outgoing port of the unicast Fib entry. |
| 1.3.6.1.4.1.2272.1.63.13.1.5 | ColumnrcIsisPlsbUcastFibHostName | read-only | current | Host name of the node where unicast FIB entry come from |
| 1.3.6.1.4.1.2272.1.63.13.1.6 | ColumnrcIsisPlsbUcastFibCost | read-only | current | unicast FIB cost |
| 1.3.6.1.4.1.2272.1.63.14 | TablercIsisPlsbMcastFibTable | not-accessible | current | Table of IS-IS PLSB Multicast FIB |
| 1.3.6.1.4.1.2272.1.63.14.1 | RowrcIsisPlsbMcastFibEntry | not-accessible | current | An entry of rcIsisPlsbMcastFib Table. A Entry in table exists for each PLSB Multicast forwarding entry generated by ISIS SPF computation |
| 1.3.6.1.4.1.2272.1.63.14.1.1 | ColumnrcIsisPlsbMcastFibSysId | not-accessible | current | System ID of the node where multicast FIB entry come from |
| 1.3.6.1.4.1.2272.1.63.14.1.2 | ColumnrcIsisPlsbMcastFibVlan | not-accessible | current | Vlan of the multicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.14.1.3 | ColumnrcIsisPlsbMcastFibMcastDestMacAddr | not-accessible | current | Multicast destination Mac Address of the multicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.14.1.4 | ColumnrcIsisPlsbMcastFibIsid | read-only | current | Isid id of the multicast FIB entry |
| 1.3.6.1.4.1.2272.1.63.14.1.5 | ColumnrcIsisPlsbMcastFibNickName | read-only | current | nick name of node where this i-sid got configured or discovered |
| 1.3.6.1.4.1.2272.1.63.14.1.6 | ColumnrcIsisPlsbMcastFibType | read-only | current | PLSB i-sid type |
| 1.3.6.1.4.1.2272.1.63.14.1.7 | ColumnrcIsisPlsbMcastFibOutgoingPorts | read-only | current | Nni port of the multicast Fib entry. |
| 1.3.6.1.4.1.2272.1.63.14.1.8 | ColumnrcIsisPlsbMcastFibHostName | read-only | current | Host name of the node where multicast FIB entry come from |
| 1.3.6.1.4.1.2272.1.63.15 | TablercIsisPlsbNodeTable | not-accessible | current | Table of IS-IS PLSB Node |
| 1.3.6.1.4.1.2272.1.63.15.1 | RowrcIsisPlsbNodeEntry | not-accessible | current | An entry of rcIsisPlsbNode Table. A Entry in table exists for each node running PLSB ISIS in the setup. |
| 1.3.6.1.4.1.2272.1.63.15.1.1 | ColumnrcIsisPlsbNodeSysId | not-accessible | current | System ID of the PLSB node entry |
| 1.3.6.1.4.1.2272.1.63.15.1.2 | ColumnrcIsisPlsbNodePrimaryParentSysId | read-only | current | System ID of parent node of the PLSB node entry for primary bvlan |
| 1.3.6.1.4.1.2272.1.63.15.1.3 | ColumnrcIsisPlsbNodePrimaryBvlan | read-only | current | spbm primary b-vlan |
| 1.3.6.1.4.1.2272.1.63.15.1.4 | ColumnrcIsisPlsbNodeSecondaryParentSysId | read-only | current | System ID of parent node of the PLSB node entry for secondary bvlan |
| 1.3.6.1.4.1.2272.1.63.15.1.5 | ColumnrcIsisPlsbNodeSecondaryBvlan | read-only | current | spbm secondary b-vlan |
| 1.3.6.1.4.1.2272.1.64 | NodercSlpp | |||
| 1.3.6.1.4.1.2272.1.64.1 | NodercSlppMib | |||
| 1.3.6.1.4.1.2272.1.64.1.0 | NodercSlppNotifications | |||
| 1.3.6.1.4.1.2272.1.64.1.0.2 | NotificationrcnSlppPortDownEventNew | current | A port down event that has occurred due to SLPP. The trap includes the port and its Vlan which receives the packet, and along with the Vlan ID and source MAC a… | |
| 1.3.6.1.4.1.2272.1.64.1.1 | NodercSlppObjects | |||
| 1.3.6.1.4.1.2272.1.64.1.1.1 | NodercSlppScalars | |||
| 1.3.6.1.4.1.2272.1.64.1.1.1.1 | ScalarrcSlppGlobalEnable | read-write | current | Global enable/disable for the simple loop prevention protocol. |
| 1.3.6.1.4.1.2272.1.64.1.1.1.2 | ScalarrcSlppTransmissionInterval | read-write | current | The interval (in seconds) for which loop detection occurs. |
| 1.3.6.1.4.1.2272.1.64.1.1.1.3 | ScalarrcSlppEtherType | read-write | current | SLPP Protocol Identification. The value is normally in Hex. |
| 1.3.6.1.4.1.2272.1.64.1.1.2 | TablercSlppVlanTable | not-accessible | current | Table of VLANs for which simple loop detection occur on. |
| 1.3.6.1.4.1.2272.1.64.1.1.2.1 | RowrcSlppVlanEntry | not-accessible | current | SLPP VLAN entry. |
| 1.3.6.1.4.1.2272.1.64.1.1.2.1.1 | ColumnrcSlppVlanVlanId | not-accessible | current | Vlan id for which simple loop detection occurs on. |
| 1.3.6.1.4.1.2272.1.64.1.1.2.1.2 | ColumnrcSlppVlanSlppEnable | read-write | current | Flag to indicate whether the VLAN entry is active or not for SLPP. |
| 1.3.6.1.4.1.2272.1.64.1.1.2.1.3 | ColumnrcSlppVlanRowStatus | read-write | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.64.1.1.3 | TablercSlppPortTable | not-accessible | current | Table of ports for which simple loop detection occurs on. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1 | RowrcSlppPortEntry | not-accessible | current | SLPP Port entry. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.1 | ColumnrcSlppPortIfIndex | not-accessible | current | Port on which simple loop detection occurs on. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.2 | ColumnrcSlppPortPktRxThreshold | read-write | current | Once the number of SLPP packets received on this port reaches this threshold action will be taken.Normally, the port will be shutdown. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.3 | ColumnrcSlppPortSlppEnable | read-write | current | Flag to indicate whether the port entry is active or not for SLPP. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.5 | ColumnrcSlppPortIncomingVlanId | read-only | current | Vlan id of the classified packet on the port brought down by SLPP. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.6 | ColumnrcSlppPortSrcNodeType | read-only | current | The src node type of the received slpp Pkt. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.7 | ColumnrcSlppPortPktRxCount | read-only | current | Total number of SLPP packets received on the port. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.12 | ColumnrcSlppPortTimeToClrPktRxCount | read-write | current | Time to clear the SLPP Rx PDU counter. This has a default value of 21600 seconds. Once SLPP is enabled and port starts receiving SLPP PDUs, a timer is started … |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.13 | ColumnrcSlppPortRemainingTimeToClrPktRxCount | read-only | current | Remaining time to clear the SLPP Rx PDU counter. It is calculated using rcSlppPortTimeToClrPktRxCount and has a granularity of 5 seconds. |
| 1.3.6.1.4.1.2272.1.64.1.1.3.1.14 | ColumnrcSlppPortClearPktRxCount | read-write | current | Clear the SLPP Rx PDU counter. |
| 1.3.6.1.4.1.2272.1.64.1.2 | NodercSlppNotificationObjects | |||
| 1.3.6.1.4.1.2272.1.64.1.2.1 | ScalarrcSlppIncomingVlanId | accessible-for-notify | current | Vlan id of the classified packet on the port brought down by SLPP. |
| 1.3.6.1.4.1.2272.1.64.1.2.2 | ScalarrcSlppSrcMacAddress | accessible-for-notify | current | Source MAC address in the classified packet on the port brought down by SLPP. |
| 1.3.6.1.4.1.2272.1.64.1.2.3 | ScalarrcSlppRxPortIndex | accessible-for-notify | current | Port on which the SLPP packet is received. |
| 1.3.6.1.4.1.2272.1.64.1.2.4 | ScalarrcSlppRxVlanId | accessible-for-notify | current | Vlan on which the SLPP packet is received. |
| 1.3.6.1.4.1.2272.1.65 | NodercTacacs | |||
| 1.3.6.1.4.1.2272.1.65.1 | NodercTacacsGlobal | |||
| 1.3.6.1.4.1.2272.1.65.1.1 | ScalarrcTacacsGlobalEnable | read-write | current | Enable/disable this feature. |
| 1.3.6.1.4.1.2272.1.65.1.2 | ScalarrcTacacsGlobalLastUserName | read-only | current | The last user for which authentication was attempted using TACACS+. |
| 1.3.6.1.4.1.2272.1.65.1.3 | ScalarrcTacacsGlobalLastAddressType | read-only | current | The type of address for the TACACS+ server that was most recently accessed |
| 1.3.6.1.4.1.2272.1.65.1.4 | ScalarrcTacacsGlobalLastAddress | read-only | current | The address of the TACACS+ server that was most recently accessed |
| 1.3.6.1.4.1.2272.1.65.1.5 | ScalarrcTacacsAccounting | read-write | current | Determines which application will be accounted by tacacs+. |
| 1.3.6.1.4.1.2272.1.65.1.6 | ScalarrcTacacsAuthentication | read-write | current | Determines which application will be authenticated by tacacs+. |
| 1.3.6.1.4.1.2272.1.65.2 | TablercTacacsServerTable | not-accessible | current | The (conceptual) table listing the TACACS+ servers with which the client shares a secret. |
| 1.3.6.1.4.1.2272.1.65.2.1 | RowrcTacacsServerEntry | not-accessible | current | An entry (conceptual row) representing a TACACS+ server with which the client shares a secret. |
| 1.3.6.1.4.1.2272.1.65.2.1.1 | ColumnrcTacacsServerAddressType | not-accessible | current | Specifies the type of IP address used on the Tacacs+ server. |
| 1.3.6.1.4.1.2272.1.65.2.1.2 | ColumnrcTacacsServerAddress | not-accessible | current | The IP address of the TACACS+ server referred to in this table entry. |
| 1.3.6.1.4.1.2272.1.65.2.1.3 | ColumnrcTacacsServerPortNumber | read-create | current | The TCP port on which the client establishes a connection to the server. A value of 0 indicates that the system specified default value is used. |
| 1.3.6.1.4.1.2272.1.65.2.1.4 | ColumnrcTacacsServerConnectionType | read-create | current | Specifies TCP connection type between device and TACACS+ server. Either a single open connection between a device and server (SingleConnection), or open/close … |
| 1.3.6.1.4.1.2272.1.65.2.1.5 | ColumnrcTacacsServerConnectionStatus | read-only | current | Specifies status TCP connection type between device and TACACS+ server. |
| 1.3.6.1.4.1.2272.1.65.2.1.6 | ColumnrcTacacsServerTimeout | read-create | current | The maximum time (in seconds) to wait for this TACACS+ server to reply. |
| 1.3.6.1.4.1.2272.1.65.2.1.7 | ColumnrcTacacsServerKey | read-create | current | Secret key to be shared with this TACACS+ server. If the key length is zero that indicates no encryption is being used. |
| 1.3.6.1.4.1.2272.1.65.2.1.8 | ColumnrcTacacsServerSourceIpInterfaceEnabled | read-create | current | Specifies whether source address specification is enabled. |
| 1.3.6.1.4.1.2272.1.65.2.1.9 | ColumnrcTacacsServerSourceIpInterfaceType | read-create | current | Specifies the type of IP address used on the interface that connects to the Tacacs+ server. If this value is unknown(0), then a system-wide default value will … |
| 1.3.6.1.4.1.2272.1.65.2.1.10 | ColumnrcTacacsServerSourceIpInterface | read-create | current | IP address of the interface to use with this server. |
| 1.3.6.1.4.1.2272.1.65.2.1.11 | ColumnrcTacacsServerPriority | read-create | current | Determines the order in which the TACACS+ servers will be used, when 1 is the highest priority. If more than one server share the same priority - they will be … |
| 1.3.6.1.4.1.2272.1.65.2.1.12 | ColumnrcTacacsServerRowStatus | read-create | current | The row status variable, can be set to destroy or createAndGo. |
| 1.3.6.1.4.1.2272.1.66 | NodercIpfix | |||
| 1.3.6.1.4.1.2272.1.66.1 | NodercIpfixMib | |||
| 1.3.6.1.4.1.2272.1.66.1.1 | NodercIpfixConfGlobal | |||
| 1.3.6.1.4.1.2272.1.66.1.1.1 | ScalarrcIpfixConfState | read-write | current | Enables/Disables the state of ipfix on the box. |
| 1.3.6.1.4.1.2272.1.66.1.2 | NodercIpfixTable | |||
| 1.3.6.1.4.1.2272.1.66.1.2.1 | TablercIpfixConfSlotTable | not-accessible | current | A table to store the configuration details for IPFIX for each slot. This table is indexed by slot number. |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1 | RowrcIpfixConfSlotEntry | not-accessible | current | One Entry holding IPFIX config information on slot basis. |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.1 | ColumnrcIpfixConfSlotNum | not-accessible | current | Slot number |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.2 | ColumnrcIpfixConfSlotAgingIntv | read-write | current | Flow record aging interval (Value in seconds). |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.3 | ColumnrcIpfixConfSlotActiveTimeout | read-write | current | Flow record active timeout value (Value in mins). |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.4 | ColumnrcIpfixConfSlotExportIntv | read-write | current | Frequency of flow export to collector (Value in sec). |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.5 | ColumnrcIpfixConfSlotExportState | read-write | current | State of exporter. |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.6 | ColumnrcIpfixConfSlotTempRefIntvSec | read-write | current | Template refresh timeout. Template is sent out to the collector at least every x seconds or every y exported packets, whichever occurs first. |
| 1.3.6.1.4.1.2272.1.66.1.2.1.1.7 | ColumnrcIpfixConfSlotTempRefIntvPkts | read-write | current | Template refresh timeout. Template is sent out to the collector at least every x seconds or every y exported packets, whichever occurs first. |
| 1.3.6.1.4.1.2272.1.66.1.2.2 | TablercIpfixCollectorTable | not-accessible | current | Table to store the configuration details for IPFIX collector for each slot. This table is indexed by slot number and ip address. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1 | RowrcIpfixCollectorEntry | not-accessible | current | One entry holds IPFIX collector config information based on slot info and collector ip address. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.1 | ColumnrcIpfixCollectorSlotNum | not-accessible | current | Slot number. An index to the CollectorEntry. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.2 | ColumnrcIpfixCollectorAddressType | not-accessible | current | IP address type of the collector. An index to the CollectorEntry. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.3 | ColumnrcIpfixCollectorAddress | not-accessible | current | IP address of the collector. An index to the CollectorEntry. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.4 | ColumnrcIpfixCollectorProtocol | read-create | current | Protocol for export data from exporter to collector . |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.5 | ColumnrcIpfixCollectorDestPort | read-create | current | Dest port to send the requests. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.6 | ColumnrcIpfixCollectorExporterIpType | read-create | current | Ip address type of the exporter for collector. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.7 | ColumnrcIpfixCollectorExporterIp | read-create | current | Ip address of the exporter for collector. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.8 | ColumnrcIpfixCollectorProtoVer | read-create | current | This specifies the protocol version for ipfix. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.9 | ColumnrcIpfixCollectorState | read-create | current | State of the particular collector. Enable is true by default. |
| 1.3.6.1.4.1.2272.1.66.1.2.2.1.10 | ColumnrcIpfixCollectorRowStatus | read-create | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.66.1.2.3 | TablercIpfixConfPortTable | not-accessible | current | A table to store the configuration details for IPFIX for each port. This table is indexed by port number. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1 | RowrcIpfixConfPortEntry | not-accessible | current | Entry holding IPFIX config information per port. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.1 | ColumnrcIpfixConfPortId | not-accessible | current | An index to the IpfixConfPortEntry, a unique identifier of the portId |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.2 | ColumnrcIpfixConfPortSampleRate | read-write | current | Used to configure the sampling rate. Sample one in every N packets. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.3 | ColumnrcIpfixConfPortHashPolyCoeffs | read-write | current | Command to set hash polynomial coeffs. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.4 | ColumnrcIpfixConfPortHashPolySeed | read-write | current | Command to set hash polynomial seed. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.5 | ColumnrcIpfixConfPortFlush | read-write | current | This is used to delete all records stored in COP, or to initiate an export of all records and delete data base after the export is finished. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.6 | ColumnrcIpfixConfPortAllTraffic | read-write | current | This is used to enable/disable ipfix on all trafiic, for the specified port. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.7 | ColumnrcIpfixConfPortHashKeyId | read-write | current | hash key id. |
| 1.3.6.1.4.1.2272.1.66.1.2.3.1.8 | ColumnrcIpfixConfPortDynamicSampRate | read-only | current | Indicates the dynamic sampling rate. |
| 1.3.6.1.4.1.2272.1.66.1.2.4 | TablercIpfixHashStatsTable | not-accessible | current | A table of hash Statistics entries to store the statistics for each slot. This table is indexed by the slot number. |
| 1.3.6.1.4.1.2272.1.66.1.2.4.1 | RowrcIpfixHashStatsEntry | not-accessible | current | Entry containing hash statistics information for a particular slot. |
| 1.3.6.1.4.1.2272.1.66.1.2.4.1.1 | ColumnrcIpfixHashStatsSlotNum | not-accessible | current | A unique identifier for the table. |
| 1.3.6.1.4.1.2272.1.66.1.2.4.1.2 | ColumnrcIpfixHashStatsHashOverflows | read-only | current | Count of hash overflows per slot. |
| 1.3.6.1.4.1.2272.1.66.1.2.4.1.3 | ColumnrcIpfixHashStatsHashDrops | read-only | current | Count of hash drops per slot. |
| 1.3.6.1.4.1.2272.1.66.1.2.4.1.4 | ColumnrcIpfixHashStatsClear | read-write | current | Setting this object will clear hash statistics for a slot. |
| 1.3.6.1.4.1.2272.1.66.1.2.4.1.5 | ColumnrcIpfixHashStatsClearTime | read-only | current | The value of sysUpTime when the hash statistics were last cleared. |
| 1.3.6.1.4.1.2272.1.66.1.2.5 | TablercIpfixExporterStatsTable | not-accessible | current | A table of Exporter Statistics entries to store the statistics for each slot, each collector. This table is indexed by the slot number and collector address. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1 | RowrcIpfixExporterStatsEntry | not-accessible | current | Entry containing Exporter statistics information for a particular slot and particular collector. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.1 | ColumnrcIpfixExporterStatsSlotNum | not-accessible | current | Index for the table, slot number. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.2 | ColumnrcIpfixExporterStatsCollectorType | not-accessible | current | Collector IP address type. This is an index for the table. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.3 | ColumnrcIpfixExporterStatsCollector | not-accessible | current | Index for the table, collector address. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.4 | ColumnrcIpfixExporterStatsOutPkts | read-only | current | Number of Packets sent. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.5 | ColumnrcIpfixExporterStatsOutOctets | read-only | current | Number of Bytes sent. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.6 | ColumnrcIpfixExporterStatsPktsLoss | read-only | current | Number of Records lost. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.7 | ColumnrcIpfixExporterStatsClear | read-write | current | Setting this object will clear exporter statistics. |
| 1.3.6.1.4.1.2272.1.66.1.2.5.1.8 | ColumnrcIpfixExporterStatsClearTime | read-only | current | The value of sysUpTime when exporter statistics were last cleared. |
| 1.3.6.1.4.1.2272.1.67 | NodercOspfv3 | |||
| 1.3.6.1.4.1.2272.1.67.1 | NodercOspfv3Mib | |||
| 1.3.6.1.4.1.2272.1.67.1.1 | NodercOspfv3Objects | |||
| 1.3.6.1.4.1.2272.1.67.1.1.1 | NodercOspfv3GeneralGroup | |||
| 1.3.6.1.4.1.2272.1.67.1.1.1.1 | ScalarrcOspfv3RouterId | read-write | current | A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 inte… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.2 | ScalarrcOspfv3AdminStat | read-write | current | The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one inter- face; 'disabled' disabl… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.3 | ScalarrcOspfv3VersionNumber | read-only | current | The version number of OSPF for IPv6 is 3. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.4 | ScalarrcOspfv3AreaBdrRtrStatus | read-only | current | A flag to note whether this router is an area border router. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.5 | ScalarrcOspfv3ASBdrRtrStatus | read-write | current | A flag to note whether this router is config- ured as an Autonomous System border router. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.6 | ScalarrcOspfv3AsScopeLsaCount | read-only | current | The number of AS-Scope (e.g. AS-External) link-state advertisements in the link-state database. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.7 | ScalarrcOspfv3AsScopeLsaCksumSum | read-only | current | The 32-bit unsigned sum of the LS checksums of the AS-scoped link-state advertisements con- tained in the link-state database. This sum can be used to determin… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.8 | ScalarrcOspfv3OriginateNewLsas | read-only | current | The number of new link-state advertisements that have been originated. This number is in- cremented each time the router originates a new LSA. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.9 | ScalarrcOspfv3RxNewLsas | read-only | current | The number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated … |
| 1.3.6.1.4.1.2272.1.67.1.1.1.10 | ScalarrcOspfv3ExtLsaCount | read-only | current | The number of External(LS type 0x4005) in the link- state database |
| 1.3.6.1.4.1.2272.1.67.1.1.1.11 | ScalarrcOspfv3ExtAreaLsdbLimit | read-write | current | The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.12 | ScalarrcOspfv3MulticastExtensions | read-write | current | A Bit Mask indicating whether the router is forwarding IPv6 multicast datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. If intra… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.13 | ScalarrcOspfv3ExitOverflowInterval | read-write | current | The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default A… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.14 | ScalarrcOspfv3DemandExtensions | read-write | current | The router's support for demand routing. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.15 | ScalarrcOspfv3TrafficEngineeringSupport | read-write | current | The router's support for traffic engineering extensions. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.16 | ScalarrcOspfv3ReferenceBandwidth | read-write | current | Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS) |
| 1.3.6.1.4.1.2272.1.67.1.1.1.17 | ScalarrcOspfv3RestartSupport | read-write | current | The router's support for OSPF hitless restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.18 | ScalarrcOspfv3RestartInterval | read-write | current | Configured OSPF hitless restart timeout interval. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.19 | ScalarrcOspfv3RestartStatus | read-only | current | Current status of OSPF hitless restart. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.20 | ScalarrcOspfv3RestartAge | read-only | current | Remaining time in current OSPF hitless restart interval. |
| 1.3.6.1.4.1.2272.1.67.1.1.1.21 | ScalarrcOspfv3RestartExitReason | read-only | current | Describes the outcome of the last attempt at a hitless restart. If the value is 'none', no restart has yet been attempted. If the value is 'inProgress', a rest… |
| 1.3.6.1.4.1.2272.1.67.1.1.1.22 | ScalarrcOspfv3BadLsaIgnore | read-write | current | The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one inter- face; 'disabled' disabl… |
| 1.3.6.1.4.1.2272.1.67.1.1.2 | TablercOspfv3AreaTable | not-accessible | current | Information describing the configured parame- ters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1 | RowrcOspfv3AreaEntry | not-accessible | current | Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.1 | ColumnrcOspfv3AreaId | not-accessible | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPFv3 backbone. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.2 | ColumnrcOspfv3ImportAsExtern | read-write | current | Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as Typ… |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.3 | ColumnrcOspfv3AreaSpfRuns | read-only | current | The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.4 | ColumnrcOspfv3AreaBdrRtrCount | read-only | current | The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.5 | ColumnrcOspfv3AreaAsBdrRtrCount | read-only | current | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.6 | ColumnrcOspfv3AreaScopeLsaCount | read-only | current | The total number of Area-Scope link-state advertisements in this area's link-state database. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.7 | ColumnrcOspfv3AreaScopeLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Area-Scope link-state advertisements' LS checksums contained in this area's link-state database. The sum can be used to determin… |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.8 | ColumnrcOspfv3AreaSummary | read-write | current | The variable rcOspfv3AreaSummary controls the im- port of Inter-Area LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router … |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.9 | ColumnrcOspfv3AreaStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.10 | ColumnrcOspfv3StubMetric | read-write | current | The metric value advertised for the default route into Stub and NSSA areas. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.11 | ColumnrcOspfv3AreaNssaTranslatorRole | read-write | current | Indicates an NSSA Border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.12 | ColumnrcOspfv3AreaNssaTranslatorState | read-only | current | Indicates if and how an NSSA Border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object is set to enabled, the NSSA Border … |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.13 | ColumnrcOspfv3AreaNssaTranslatorStabilityInterval | read-write | current | The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.14 | ColumnrcOspfv3AreaNssaTranslatorEvents | read-only | current | Indicates the number of Translator State changes that have occurred since the last boot-up. |
| 1.3.6.1.4.1.2272.1.67.1.1.2.1.15 | ColumnrcOspfv3AreaStubMetricType | read-write | current | This variable displays the type of metric ad- vertised as a default route. |
| 1.3.6.1.4.1.2272.1.67.1.1.3 | TablercOspfv3AsLsdbTable | not-accessible | current | The OSPFv3 Process's AS-Scope Link State Database. |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1 | RowrcOspfv3AsLsdbEntry | not-accessible | current | A single AS-Scope Link State Advertisement. |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.1 | ColumnrcOspfv3AsLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. AS-Scope LSAs not recognized by the router may be stored … |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.2 | ColumnrcOspfv3AsLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.3 | ColumnrcOspfv3AsLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.4 | ColumnrcOspfv3AsLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.5 | ColumnrcOspfv3AsLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.6 | ColumnrcOspfv3AsLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.7 | ColumnrcOspfv3AsLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.2272.1.67.1.1.3.1.8 | ColumnrcOspfv3AsLsdbTypeKnown | read-only | current | Is the LSA type recognized by this Router? |
| 1.3.6.1.4.1.2272.1.67.1.1.4 | TablercOspfv3AreaLsdbTable | not-accessible | current | The OSPFv3 Process's Area-Scope Link State Database. |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1 | RowrcOspfv3AreaLsdbEntry | not-accessible | current | A single Area-Scope Link State Advertisement. |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.1 | ColumnrcOspfv3AreaLsdbAreaId | not-accessible | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.2 | ColumnrcOspfv3AreaLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. Area-Scope LSAs unrecognized by the router are also store… |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.3 | ColumnrcOspfv3AreaLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.4 | ColumnrcOspfv3AreaLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.5 | ColumnrcOspfv3AreaLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.6 | ColumnrcOspfv3AreaLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.7 | ColumnrcOspfv3AreaLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.8 | ColumnrcOspfv3AreaLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.2272.1.67.1.1.4.1.9 | ColumnrcOspfv3AreaLsdbTypeKnown | read-only | current | Is the LSA type recognized by this Router? |
| 1.3.6.1.4.1.2272.1.67.1.1.5 | TablercOspfv3LinkLsdbTable | not-accessible | current | The OSPFv3 Process's Link-Scope Link State Database. |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1 | RowrcOspfv3LinkLsdbEntry | not-accessible | current | A single Link-Scope Link State Advertisement. |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.1 | ColumnrcOspfv3LinkLsdbIfIndex | not-accessible | current | The identifier of the link from which the LSA was received. |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.2 | ColumnrcOspfv3LinkLsdbType | not-accessible | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. Link-Scope LSAs unrecognized by the router are also store… |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.3 | ColumnrcOspfv3LinkLsdbRouterId | not-accessible | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.4 | ColumnrcOspfv3LinkLsdbLsid | not-accessible | current | The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the adv… |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.5 | ColumnrcOspfv3LinkLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.6 | ColumnrcOspfv3LinkLsdbAge | read-only | current | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.7 | ColumnrcOspfv3LinkLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.8 | ColumnrcOspfv3LinkLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.2272.1.67.1.1.5.1.9 | ColumnrcOspfv3LinkLsdbTypeKnown | read-only | current | Indicates whether the LSA type is recognized by this Router. |
| 1.3.6.1.4.1.2272.1.67.1.1.6 | TablercOspfv3HostTable | not-accessible | current | The list of Hosts, and their metrics, that the router will advertise as host routes. |
| 1.3.6.1.4.1.2272.1.67.1.1.6.1 | RowrcOspfv3HostEntry | not-accessible | current | A metric to be advertised when a given host is reachable. |
| 1.3.6.1.4.1.2272.1.67.1.1.6.1.1 | ColumnrcOspfv3HostAddressType | not-accessible | current | The address type of rcOspfv3HostAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.2272.1.67.1.1.6.1.2 | ColumnrcOspfv3HostAddress | not-accessible | current | The IPv6 Address of the Host. Must be a Global or Site-local address. |
| 1.3.6.1.4.1.2272.1.67.1.1.6.1.3 | ColumnrcOspfv3HostMetric | read-write | current | The Metric to be advertised. |
| 1.3.6.1.4.1.2272.1.67.1.1.6.1.4 | ColumnrcOspfv3HostStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.2272.1.67.1.1.6.1.5 | ColumnrcOspfv3HostAreaID | read-write | current | The Area the Host Entry is to be found within. By default, the area that a subsuming OSPFv3 in- terface is in, or 0.0.0.0 |
| 1.3.6.1.4.1.2272.1.67.1.1.7 | TablercOspfv3IfTable | not-accessible | current | The OSPFv3 Interface Table describes the inter- faces from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1 | RowrcOspfv3IfEntry | not-accessible | current | The OSPFv3 Interface Entry describes one inter- face from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.1 | ColumnrcOspfv3IfIndex | not-accessible | current | The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.2 | ColumnrcOspfv3IfAreaId | read-write | current | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPFv3 backbone. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.3 | ColumnrcOspfv3IfType | read-write | current | The OSPFv3 interface type. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.4 | ColumnrcOspfv3IfAdminStat | read-write | current | The OSPFv3 interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The … |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.5 | ColumnrcOspfv3IfRtrPriority | read-write | current | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.6 | ColumnrcOspfv3IfTransitDelay | read-write | current | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.7 | ColumnrcOspfv3IfRetransInterval | read-write | current | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.8 | ColumnrcOspfv3IfHelloInterval | read-write | current | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a c… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.9 | ColumnrcOspfv3IfRtrDeadInterval | read-write | current | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.10 | ColumnrcOspfv3IfPollInterval | read-write | current | The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.11 | ColumnrcOspfv3IfState | read-only | current | The OSPFv3 Interface State. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.12 | ColumnrcOspfv3IfDesignatedRouter | read-only | current | The Router ID of the Designated Router. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.14 | ColumnrcOspfv3IfBackupDesignatedRouter | read-only | current | The Router ID of the Backup Designated Router. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.15 | ColumnrcOspfv3IfEvents | read-only | current | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.17 | ColumnrcOspfv3IfStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.18 | ColumnrcOspfv3IfMulticastForwarding | read-write | current | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multic… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.19 | ColumnrcOspfv3IfDemand | read-write | current | Indicates whether Demand OSPFv3 procedures (hel- lo suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be per- formed on th… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.20 | ColumnrcOspfv3IfMetricValue | read-write | current | The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by … |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.21 | ColumnrcOspfv3IfLinkScopeLsaCount | read-only | current | The total number of Link-Scope link-state advertisements in this link's link-state database. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.22 | ColumnrcOspfv3IfLinkLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this link's link-state database. The sum can be used to determin… |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.23 | ColumnrcOspfv3IfInstId | read-write | current | Enables multiple instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance … |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.24 | ColumnrcOspfv3IfDemandNbrProbe | read-write | current | Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.25 | ColumnrcOspfv3IfDemandNbrProbeRetxLimit | read-write | current | The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down. |
| 1.3.6.1.4.1.2272.1.67.1.1.7.1.26 | ColumnrcOspfv3IfDemandNbrProbeInterval | read-write | current | Defines how often the neighbor will be probed. |
| 1.3.6.1.4.1.2272.1.67.1.1.8 | TablercOspfv3VirtIfTable | not-accessible | current | Information about this router's virtual inter- faces. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1 | RowrcOspfv3VirtIfEntry | not-accessible | current | Information about a single Virtual Interface. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.1 | ColumnrcOspfv3VirtIfAreaId | not-accessible | current | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.2 | ColumnrcOspfv3VirtIfNeighbor | not-accessible | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.3 | ColumnrcOspfv3VirtIfIndex | read-only | current | The interface ID assigned to this OSPFv3 virtual interface. It is advertised in Hello's sent over the virtal link and in the router's router-LSAs. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.4 | ColumnrcOspfv3VirtIfTransitDelay | read-write | current | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.5 | ColumnrcOspfv3VirtIfRetransInterval | read-write | current | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.6 | ColumnrcOspfv3VirtIfHelloInterval | read-write | current | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.7 | ColumnrcOspfv3VirtIfRtrDeadInterval | read-write | current | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.8 | ColumnrcOspfv3VirtIfState | read-only | current | OSPF virtual interface states. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.9 | ColumnrcOspfv3VirtIfEvents | read-only | current | The number of state changes or error events on this Virtual Link |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.10 | ColumnrcOspfv3VirtIfStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.11 | ColumnrcOspfv3VirtIfLinkScopeLsaCount | read-only | current | The total number of Link-Scope link-state advertisements in this virtual link's link-state database. |
| 1.3.6.1.4.1.2272.1.67.1.1.8.1.12 | ColumnrcOspfv3VirtIfLinkLsaCksumSum | read-only | current | The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this virtual link's link-state database. The sum can be used to … |
| 1.3.6.1.4.1.2272.1.67.1.1.9 | TablercOspfv3NbrTable | not-accessible | current | A table of non-virtual neighbor information. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1 | RowrcOspfv3NbrEntry | not-accessible | current | The information regarding a single neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.1 | ColumnrcOspfv3NbrIfIndex | not-accessible | current | The local link ID of the link over which the neighbor can be reached. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.2 | ColumnrcOspfv3NbrRtrId | not-accessible | current | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.3 | ColumnrcOspfv3NbrAddressType | read-only | current | The address type of rcOspfv3NbrAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.4 | ColumnrcOspfv3NbrAddress | read-only | current | The IPv6 address of the neighbor associated with the local link. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.5 | ColumnrcOspfv3NbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's op- tions field. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.6 | ColumnrcOspfv3NbrPriority | read-only | current | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designat… |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.7 | ColumnrcOspfv3NbrState | read-only | current | The State of the relationship with this Neigh- bor. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.8 | ColumnrcOspfv3NbrEvents | read-only | current | The number of times this neighbor relationship has changed state, or an error has occurred. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.9 | ColumnrcOspfv3NbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.10 | ColumnrcOspfv3NbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.11 | ColumnrcOspfv3NbrIfId | read-only | current | The interface ID that the neighbor advertises in its Hello Packets on this link, that is, the neighbor's local interface index. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.12 | ColumnrcOspfv3NbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.13 | ColumnrcOspfv3NbrRestartHelperAge | read-only | current | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.14 | ColumnrcOspfv3NbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.9.1.15 | ColumnrcOspfv3NbrDeadIntCnt | read-only | current | This is a Dead interval Count or TTL (time to live) field that indicates how many seconds are left before the Neighbor is declared down. The starting value is … |
| 1.3.6.1.4.1.2272.1.67.1.1.10 | TablercOspfv3NbmaNbrTable | not-accessible | current | A table of configured non-virtual neighbor information and neighbors dynamically discovered by lower-level protocols such as Inverse Neighbor Discovery. |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1 | RowrcOspfv3NbmaNbrEntry | not-accessible | current | The information regarding a single configured neighbor or neighbor discovered by lower-level protocols such as Inverse Neighbor Discovery. |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.1 | ColumnrcOspfv3NbmaNbrIfIndex | not-accessible | current | The local link ID of the link over which the neighbor can be reached. |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.2 | ColumnrcOspfv3NbmaNbrAddress | not-accessible | current | The IPv6 address of the neighbor associated with the local link. |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.3 | ColumnrcOspfv3NbmaNbrPriority | read-write | current | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designat… |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.4 | ColumnrcOspfv3NbmaNbrRtrId | read-only | current | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. A value of 0.0.0.0 is returned until… |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.5 | ColumnrcOspfv3NbmaNbrState | read-only | current | The State of the relationship with this Neigh- bor. |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.6 | ColumnrcOspfv3NbmaNbrStorageType | read-write | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. Manually… |
| 1.3.6.1.4.1.2272.1.67.1.1.10.1.7 | ColumnrcOspfv3NbmaNbrStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.2272.1.67.1.1.11 | TablercOspfv3VirtNbrTable | not-accessible | current | A table of virtual neighbor information. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1 | RowrcOspfv3VirtNbrEntry | not-accessible | current | Virtual neighbor information. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.1 | ColumnrcOspfv3VirtNbrArea | not-accessible | current | The Transit Area Identifier. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.2 | ColumnrcOspfv3VirtNbrRtrId | not-accessible | current | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.3 | ColumnrcOspfv3VirtNbrIfIndex | read-only | current | The local interface ID for the virtual link over which the neighbor can be reached. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.4 | ColumnrcOspfv3VirtNbrAddressType | read-only | current | The address type of rcOspfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.5 | ColumnrcOspfv3VirtNbrAddress | read-only | current | The IPv6 address advertised by this Virtual Neighbor. It must be a Site-Local or Global scope address. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.6 | ColumnrcOspfv3VirtNbrOptions | read-only | current | A Bit Mask corresponding to the neighbor's op- tions field. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.7 | ColumnrcOspfv3VirtNbrState | read-only | current | The state of the Virtual Neighbor Relation- ship. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.8 | ColumnrcOspfv3VirtNbrEvents | read-only | current | The number of times this virtual link has changed its state, or an error has occurred. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.9 | ColumnrcOspfv3VirtNbrLsRetransQLen | read-only | current | The current length of the retransmission queue. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.10 | ColumnrcOspfv3VirtNbrHelloSuppressed | read-only | current | Indicates whether Hellos are being suppressed to the neighbor |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.11 | ColumnrcOspfv3VirtNbrIfId | read-only | current | The interface ID that the neighbor advertises in its Hello Packets on this virtual link, that is, the neighbor's local interface ID. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.12 | ColumnrcOspfv3VirtNbrRestartHelperStatus | read-only | current | Indicates whether the router is acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.13 | ColumnrcOspfv3VirtNbrRestartHelperAge | read-only | current | Remaining time in current OSPF hitless restart interval, if the router is acting as a restart helper for the neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.11.1.14 | ColumnrcOspfv3VirtNbrRestartHelperExitReason | read-only | current | Describes the outcome of the last attempt at acting as a hitless restart helper for the neighbor. |
| 1.3.6.1.4.1.2272.1.67.1.1.12 | TablercOspfv3AreaAggregateTable | not-accessible | current | A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range sub- sumes another range the most spe… |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1 | RowrcOspfv3AreaAggregateEntry | not-accessible | current | A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range sub- sumes another range the most spe… |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.1 | ColumnrcOspfv3AreaAggregateAreaID | not-accessible | current | The Area the Address Aggregate is to be found within. |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.2 | ColumnrcOspfv3AreaAggregateAreaLsdbType | not-accessible | current | The type of the Address Aggregate. This field specifies the Area Lsdb type that this Address Ag- gregate applies to. |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.3 | ColumnrcOspfv3AreaAggregatePrefix | not-accessible | current | The IPv6 Prefix. |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.4 | ColumnrcOspfv3AreaAggregatePrefixLength | not-accessible | current | The length of the prefix (in bits). A prefix can not be shorter than 3 bits. |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.5 | ColumnrcOspfv3AreaAggregateStatus | read-create | current | This variable controls the status of the en- try. The use of RowStatus is covered in more detail in [6]. |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.6 | ColumnrcOspfv3AreaAggregateEffect | read-write | current | Prefixes subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the prefix not being advertised at … |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.7 | ColumnrcOspfv3AreaAggregateRouteTag | read-write | current | This tag is advertised only in the summarized As-External LSA when summarizing from type-7 to type-5. |
| 1.3.6.1.4.1.2272.1.67.1.1.12.1.8 | ColumnrcOspfv3AreaAggregateAdvertiseMetric | read-write | current | Used to specify a metric for a Summary LSA (type 3) generated by OSPF through an area range. If this metric is set to 0, OSPF uses the cost to the farthest poi… |
| 1.3.6.1.4.1.2272.1.67.1.1.13 | NodercOspfv3Stats | |||
| 1.3.6.1.4.1.2272.1.67.1.1.13.1 | ScalarrcOspfv3StatsTxPackets | read-only | current | Used to indicate the number of packets transmitted by OSPF. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.2 | ScalarrcOspfv3StatsRxPackets | read-only | current | Used to indicate the number of packets received by OSPF. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.3 | ScalarrcOspfv3StatsTxDropPackets | read-only | current | Used to indicate the number of packets dropped before transmitted by OSPF. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.4 | ScalarrcOspfv3StatsRxDropPackets | read-only | current | Used to indicate the number of packets dropped before received by OSPF. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.5 | ScalarrcOspfv3StatsRxBadPackets | read-only | current | Used to indicate the number of packets received by OSPF that are bad. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.6 | ScalarrcOspfv3StatsSpfRuns | read-only | current | Used to indicate the total number of SPF calculations performed by OSPF, which also includes the number of partial route table calculation for Incremental Upda… |
| 1.3.6.1.4.1.2272.1.67.1.1.13.7 | ScalarrcOspfv3StatsLastSpfRun | read-only | current | Used to indicate the time(SysUpTime) since the last spf calculated by OSPF. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.8 | ScalarrcOspfv3StatsLsdbTblSize | read-only | current | Used to indicate the number of entries in the linkstate database table. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.9 | ScalarrcOspfv3StatsBadLsReqs | read-only | current | Used to indicate the number of bad ls requests. |
| 1.3.6.1.4.1.2272.1.67.1.1.13.10 | ScalarrcOspfv3StatsSeqMismatches | read-only | current | Used to indicate the number of sequence mismatched packets. |
| 1.3.6.1.4.1.2272.1.67.1.2 | NodercOspfv3Conformance | |||
| 1.3.6.1.4.1.2272.1.67.1.2.1 | NodercOspfv3Groups | |||
| 1.3.6.1.4.1.2272.1.67.1.2.1.1 | GrouprcOspfv3BasicGroup | current | These objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.2 | GrouprcOspfv3AreaGroup | current | These objects are required for OSPFv3 systems supporting areas. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.3 | GrouprcOspfv3AsLsdbGroup | current | These objects are required for OSPFv3 systems that display their AS-scope link state database. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.4 | GrouprcOspfv3AreaLsdbGroup | current | These objects are required for OSPFv3 systems that display their Area-scope link state database. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.5 | GrouprcOspfv3LinkLsdbGroup | current | These objects are required for OSPFv3 systems that display their Link-scope link state database. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.6 | GrouprcOspfv3HostGroup | current | These objects are required for OSPFv3 systems that support attached hosts. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.7 | GrouprcOspfv3IfGroup | current | These interface objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.8 | GrouprcOspfv3VirtIfGroup | current | These virtual interface objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.9 | GrouprcOspfv3NbrGroup | current | These neighbor objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.10 | GrouprcOspfv3NbmaNbrGroup | current | These NBMA neighbor objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.11 | GrouprcOspfv3VirtNbrGroup | current | These virtual neighbor objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.1.12 | GrouprcOspfv3AreaAggregateGroup | current | These area aggregate objects are required for OSPFv3 systems. | |
| 1.3.6.1.4.1.2272.1.67.1.2.2 | NodercOspfv3Compliances | |||
| 1.3.6.1.4.1.2272.1.67.1.2.2.1 | CompliancercOspfv3Compliance | current | The compliance statement | |
| 1.3.6.1.4.1.2272.1.69 | NodercCfm | |||
| 1.3.6.1.4.1.2272.1.69.1 | TablercCfmMaintenanceDomainTable | not-accessible | current | Connectivity Fault Management Maintenance Domain table |
| 1.3.6.1.4.1.2272.1.69.1.1 | RowrcCfmMaintenanceDomainEntry | not-accessible | current | Connectivity Fault Management Maintenance Domain entry. |
| 1.3.6.1.4.1.2272.1.69.1.1.1 | ColumnrcCfmMaintenanceDomainIndex | not-accessible | current | Maintenance Domain index |
| 1.3.6.1.4.1.2272.1.69.1.1.2 | ColumnrcCfmMaintenanceDomainName | read-create | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.1.1.3 | ColumnrcCfmMaintenanceDomainRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.1.1.4 | ColumnrcCfmMaintenanceDomainNumOfMa | read-only | current | Used to indicate the number of MAs belong to this maintenance domain |
| 1.3.6.1.4.1.2272.1.69.1.1.6 | ColumnrcCfmMaintenanceDomainLevel | read-create | current | To set the maintenance level in this domain |
| 1.3.6.1.4.1.2272.1.69.1.1.7 | ColumnrcCfmMaintenanceDomainNumOfMip | read-only | current | Used to indicate the number of Mips belong to this maintenance domain |
| 1.3.6.1.4.1.2272.1.69.1.1.8 | ColumnrcCfmMaintenanceDomainType | read-only | current | To indicate the type of domain |
| 1.3.6.1.4.1.2272.1.69.2 | TablercCfmMaintenanceAssociationTable | not-accessible | current | Connectivity Fault Management Maintenance Association table |
| 1.3.6.1.4.1.2272.1.69.2.1 | RowrcCfmMaintenanceAssociationEntry | not-accessible | current | Connectivity Fault Management Maintenance Association entry. |
| 1.3.6.1.4.1.2272.1.69.2.1.1 | ColumnrcCfmMaintenanceAssociationDomainIndex | not-accessible | current | Maintenance Association Domain Index |
| 1.3.6.1.4.1.2272.1.69.2.1.2 | ColumnrcCfmMaintenanceAssociationAssociationIndex | not-accessible | current | Maintenance Association Index |
| 1.3.6.1.4.1.2272.1.69.2.1.3 | ColumnrcCfmMaintenanceAssociationDomainName | read-only | current | Maintenance Association Domain Name |
| 1.3.6.1.4.1.2272.1.69.2.1.4 | ColumnrcCfmMaintenanceAssociationAssociationName | read-create | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.2.1.5 | ColumnrcCfmMaintenanceAssociationAdminState | read-create | current | Administratively enable or disable a maintenance association. |
| 1.3.6.1.4.1.2272.1.69.2.1.6 | ColumnrcCfmMaintenanceAssociationRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.2.1.12 | ColumnrcCfmMaintenanceAssociationNumOfMep | read-only | current | Used to indicate the number of MEPs belong to this maintenance association |
| 1.3.6.1.4.1.2272.1.69.3 | TablercCfmMaintenanceEndPointTable | not-accessible | current | Connectivity Fault Management Maintenance Association table |
| 1.3.6.1.4.1.2272.1.69.3.1 | RowrcCfmMaintenanceEndPointEntry | not-accessible | current | Connectivity Fault Management Maintenance EndPoint entry. |
| 1.3.6.1.4.1.2272.1.69.3.1.1 | ColumnrcCfmMaintenanceEndPointDomainIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.3.1.2 | ColumnrcCfmMaintenanceEndPointAssociationIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.3.1.3 | ColumnrcCfmMaintenanceEndPointId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.3.1.4 | ColumnrcCfmMaintenanceEndPointDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.3.1.5 | ColumnrcCfmMaintenanceEndPointAssociationName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.3.1.6 | ColumnrcCfmMaintenanceEndPointAdminState | read-create | current | Administratively enable or disable a maintenance EndPoint. |
| 1.3.6.1.4.1.2272.1.69.3.1.7 | ColumnrcCfmMaintenanceEndPointRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.1.69.3.1.11 | ColumnrcCfmMaintenanceEndPointMepType | read-only | current | Mep Type |
| 1.3.6.1.4.1.2272.1.69.3.1.13 | ColumnrcCfmMaintenanceEndPointServiceDescription | read-only | current | Used to specify what service this mep assigned to |
| 1.3.6.1.4.1.2272.1.69.3.1.15 | ColumnrcCfmMaintenanceEndPointMepStatus | read-only | current | Indicating if the mep status is active or inactive. Only Dual-Home Ring endpoint client meps can have active/inactive status. All other mep types have active s… |
| 1.3.6.1.4.1.2272.1.69.17 | TablercCfmTransmitLbmTable | not-accessible | current | Connectivity Fault Management transmit LBM table |
| 1.3.6.1.4.1.2272.1.69.17.1 | RowrcCfmTransmitLbmEntry | not-accessible | current | Connectivity Fault Management Maintenance EndPoint LBM entry. |
| 1.3.6.1.4.1.2272.1.69.17.1.1 | ColumnrcCfmTransmitLbmDomainIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.17.1.2 | ColumnrcCfmTransmitLbmAssociationIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.17.1.3 | ColumnrcCfmTransmitLbmIndex | not-accessible | current | Maintenance EndPoint Index |
| 1.3.6.1.4.1.2272.1.69.17.1.4 | ColumnrcCfmTransmitLbmDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.17.1.5 | ColumnrcCfmTransmitLbmAssociationName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.17.1.6 | ColumnrcCfmTransmitLbmDestMacAddress | read-write | current | An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address. |
| 1.3.6.1.4.1.2272.1.69.17.1.7 | ColumnrcCfmTransmitLbmDestMepId | read-write | current | An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenanc… |
| 1.3.6.1.4.1.2272.1.69.17.1.8 | ColumnrcCfmTransmitLbmDestIsMepId | read-write | current | True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used f… |
| 1.3.6.1.4.1.2272.1.69.17.1.9 | ColumnrcCfmTransmitLbmMessages | read-write | current | The number of loopback messages to be transmitted. |
| 1.3.6.1.4.1.2272.1.69.17.1.11 | ColumnrcCfmTransmitLbmVlanPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tsg, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.17.1.12 | ColumnrcCfmTransmitLbmVlanDropEnable | read-write | current | Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.17.1.13 | ColumnrcCfmTransmitLbmSeqNumber | read-only | current | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| 1.3.6.1.4.1.2272.1.69.17.1.14 | ColumnrcCfmTransmitLbmResultOk | read-only | current | Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.17.1.15 | ColumnrcCfmTransmitLbmStatus | read-write | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages.… |
| 1.3.6.1.4.1.2272.1.69.17.1.16 | ColumnrcCfmTransmitLbmResult | read-only | current | Display the LBM result. |
| 1.3.6.1.4.1.2272.1.69.17.1.18 | ColumnrcCfmTransmitLbmTimeoutInt | read-write | current | The interval to wait for an LBM time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| 1.3.6.1.4.1.2272.1.69.17.1.19 | ColumnrcCfmTransmitLbmInterFrameInt | read-write | current | The interval between LBM frames with a range of (0..1000) msecs with a default value of 500 msecs. The value of 0 msecs indicates to send the frames as fast as… |
| 1.3.6.1.4.1.2272.1.69.17.1.20 | ColumnrcCfmTransmitLbmTestPattern | read-write | current | The test pattern to use in the LBM PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a defau… |
| 1.3.6.1.4.1.2272.1.69.17.1.21 | ColumnrcCfmTransmitLbmDataSize | read-write | current | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| 1.3.6.1.4.1.2272.1.69.17.1.22 | ColumnrcCfmTransmitLbmFrameSize | read-write | current | If the frame size (64-500 for R-Mod and 64-9600 for RC-Mod)is specified then the data size shall be internally calculated and the calculated data size shall be… |
| 1.3.6.1.4.1.2272.1.69.17.1.23 | ColumnrcCfmTransmitLbmSourceMode | read-write | current | Source modes of the transmit loopback service. |
| 1.3.6.1.4.1.2272.1.69.18 | TablercCfmTransmitLtmTable | not-accessible | current | Connectivity Fault Management transmit LTM table |
| 1.3.6.1.4.1.2272.1.69.18.1 | RowrcCfmTransmitLtmEntry | not-accessible | current | Connectivity Fault Management Maintenance EndPoint LTM entry. |
| 1.3.6.1.4.1.2272.1.69.18.1.1 | ColumnrcCfmTransmitLtmDomainIndex | not-accessible | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.18.1.2 | ColumnrcCfmTransmitLtmAssociationIndex | not-accessible | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.18.1.3 | ColumnrcCfmTransmitLtmIndex | not-accessible | current | Maintenance EndPoint Index |
| 1.3.6.1.4.1.2272.1.69.18.1.4 | ColumnrcCfmTransmitLtmDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.18.1.5 | ColumnrcCfmTransmitLtmAssociationName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.18.1.6 | ColumnrcCfmTransmitLtmVlanPriority | read-write | current | Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.18.1.7 | ColumnrcCfmTransmitLtmDestMacAddress | read-write | current | An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address. |
| 1.3.6.1.4.1.2272.1.69.18.1.8 | ColumnrcCfmTransmitLtmDestMepId | read-write | current | An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenanc… |
| 1.3.6.1.4.1.2272.1.69.18.1.9 | ColumnrcCfmTransmitLtmDestIsMepId | read-write | current | True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used f… |
| 1.3.6.1.4.1.2272.1.69.18.1.10 | ColumnrcCfmTransmitLtmTtl | read-write | current | The number of hops remaining to this LTM. Decremented by 1 by each Bridge that handles the LTM. The decremented value is returned in the LTR. If 0 on output, t… |
| 1.3.6.1.4.1.2272.1.69.18.1.11 | ColumnrcCfmTransmitLtmSeqNumber | read-only | current | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| 1.3.6.1.4.1.2272.1.69.18.1.12 | ColumnrcCfmTransmitLtmResultOk | read-only | current | Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.18.1.13 | ColumnrcCfmTransmitLtmStatus | read-write | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages.… |
| 1.3.6.1.4.1.2272.1.69.18.1.14 | ColumnrcCfmTransmitLtmResult | read-only | obsolete | Display the LTM result. |
| 1.3.6.1.4.1.2272.1.69.18.1.15 | ColumnrcCfmTransmitLtmFlag | read-only | current | LTM result flag indicating LTM status or error code. Each enum value represents a status or error case. 1 - No error 2 - Ltm Internal Error 3 - Unknown Remote … |
| 1.3.6.1.4.1.2272.1.69.18.1.16 | ColumnrcCfmTransmitLtmSourceMode | read-write | current | Source modes of the transmit linktrace service. |
| 1.3.6.1.4.1.2272.1.69.33 | TablercCfmLtrReplyTable | not-accessible | current | This table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message. |
| 1.3.6.1.4.1.2272.1.69.33.1 | RowrcCfmLtrReplyEntry | not-accessible | current | The Linktrace Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.33.1.1 | ColumnrcCfmLtrReplyDomainIndex | not-accessible | current | Maintenance Domain Index |
| 1.3.6.1.4.1.2272.1.69.33.1.2 | ColumnrcCfmLtrReplyAssociationIndex | not-accessible | current | Maintenance Association Index |
| 1.3.6.1.4.1.2272.1.69.33.1.3 | ColumnrcCfmLtrReplyMepId | not-accessible | current | Maintenance EndPoint ID |
| 1.3.6.1.4.1.2272.1.69.33.1.4 | ColumnrcCfmLtrReplySeqNumber | not-accessible | current | The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which LTM's response is going to be returned. |
| 1.3.6.1.4.1.2272.1.69.33.1.5 | ColumnrcCfmLtrReplyHop | not-accessible | current | The number of hops away from LTM initiator |
| 1.3.6.1.4.1.2272.1.69.33.1.6 | ColumnrcCfmLtrReplyReceiveOrder | not-accessible | current | An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. This value is assigned sequentially from 1, in the order that… |
| 1.3.6.1.4.1.2272.1.69.33.1.7 | ColumnrcCfmLtrReplyTtl | read-only | current | Ttl field value for a returned LTR. |
| 1.3.6.1.4.1.2272.1.69.33.1.8 | ColumnrcCfmLtrReplyDomainName | read-only | current | Maintenance Domain Name |
| 1.3.6.1.4.1.2272.1.69.33.1.9 | ColumnrcCfmLtrReplyAssociationName | read-only | current | Maintenance Association Name |
| 1.3.6.1.4.1.2272.1.69.33.1.10 | ColumnrcCfmLtrReplyForwarded | read-only | current | Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. |
| 1.3.6.1.4.1.2272.1.69.33.1.11 | ColumnrcCfmLtrReplyTerminalMep | read-only | current | A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. |
| 1.3.6.1.4.1.2272.1.69.33.1.12 | ColumnrcCfmLtrReplyLastEgressIdentifier | read-only | current | An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace… |
| 1.3.6.1.4.1.2272.1.69.33.1.13 | ColumnrcCfmLtrReplyNextEgressIdentifier | read-only | current | An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Res… |
| 1.3.6.1.4.1.2272.1.69.33.1.14 | ColumnrcCfmLtrReplyRelayAction | read-only | current | Value returned in the Relay Action field. |
| 1.3.6.1.4.1.2272.1.69.33.1.15 | ColumnrcCfmLtrReplySrcMac | read-only | current | Mac address of the MP that respond to the LTM request for this LTR |
| 1.3.6.1.4.1.2272.1.69.33.1.16 | ColumnrcCfmLtrReplyIngressAction | read-only | current | The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(5) indicates that no Reply Ingress TLV was returned in the LTM. |
| 1.3.6.1.4.1.2272.1.69.33.1.17 | ColumnrcCfmLtrReplyIngressMac | read-only | current | Mac address returned in the ingress MAC address field. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are … |
| 1.3.6.1.4.1.2272.1.69.33.1.18 | ColumnrcCfmLtrReplyIngressPortIdSubtype | read-only | current | Format of the Ingress Port ID. If the rcCfmLtrReplyIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.2272.1.69.33.1.19 | ColumnrcCfmLtrReplyIngressPortId | read-only | current | Ingress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyIngressPortIdSubtype object. If the rcCfmLtrReplyIngress object conta… |
| 1.3.6.1.4.1.2272.1.69.33.1.20 | ColumnrcCfmLtrReplyEgressAction | read-only | current | The value returned in the Egress Action Field of the LTM. The value egrNoTlv(5) indicates that no Reply Egress TLV was returned in the LTM. |
| 1.3.6.1.4.1.2272.1.69.33.1.21 | ColumnrcCfmLtrReplyEgressMac | read-only | current | Mac address returned in the egress MAC address field. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are me… |
| 1.3.6.1.4.1.2272.1.69.33.1.22 | ColumnrcCfmLtrReplyEgressPortIdSubtype | read-only | current | Format of the Egress Port ID. If the rcCfmLtrReplyEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless. |
| 1.3.6.1.4.1.2272.1.69.33.1.23 | ColumnrcCfmLtrReplyEgressPortId | read-only | current | Egress Port ID. The format of this object is determined by the value of the rcCfmLtrReplyEgressPortIdSubtype object. If the rcCfmLtrReplyEgress object contains… |
| 1.3.6.1.4.1.2272.1.69.34 | TablercCfmTransmitL2PingTable | not-accessible | current | Connectivity Fault Management transmit L2Ping table |
| 1.3.6.1.4.1.2272.1.69.34.1 | RowrcCfmTransmitL2PingEntry | not-accessible | current | Connectivity Fault Management Maintenance EndPoint L2Ping entry. |
| 1.3.6.1.4.1.2272.1.69.34.1.1 | ColumnrcCfmTransmitL2PingVlanId | not-accessible | current | A value that uniquely identifies the Customer Vlan |
| 1.3.6.1.4.1.2272.1.69.34.1.2 | ColumnrcCfmTransmitL2PingDestMacAddress | read-write | current | An indication of the target MAC Address field to be transmitted |
| 1.3.6.1.4.1.2272.1.69.34.1.3 | ColumnrcCfmTransmitL2PingHostName | read-write | current | The target host name |
| 1.3.6.1.4.1.2272.1.69.34.1.4 | ColumnrcCfmTransmitL2PingDestIsHostName | read-write | current | True indicates that the host name is used for L2Ping transmission |
| 1.3.6.1.4.1.2272.1.69.34.1.5 | ColumnrcCfmTransmitL2PingMessages | read-write | current | The number of L2Ping messages to be transmitted. |
| 1.3.6.1.4.1.2272.1.69.34.1.6 | ColumnrcCfmTransmitL2PingPriority | read-write | current | Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.34.1.7 | ColumnrcCfmTransmitL2PingTimeoutInt | read-write | current | The interval to wait for an L2Ping time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| 1.3.6.1.4.1.2272.1.69.34.1.8 | ColumnrcCfmTransmitL2PingTestPattern | read-write | current | The test pattern to use in the L2Ping PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a de… |
| 1.3.6.1.4.1.2272.1.69.34.1.9 | ColumnrcCfmTransmitL2PingDataSize | read-write | current | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| 1.3.6.1.4.1.2272.1.69.34.1.10 | ColumnrcCfmTransmitL2PingFrameSize | read-write | current | If the frame size is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV. |
| 1.3.6.1.4.1.2272.1.69.34.1.11 | ColumnrcCfmTransmitL2PingSourceMode | read-write | current | Source modes of the transmit loopback service. |
| 1.3.6.1.4.1.2272.1.69.34.1.12 | ColumnrcCfmTransmitL2PingSeqNumber | read-only | current | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| 1.3.6.1.4.1.2272.1.69.34.1.13 | ColumnrcCfmTransmitL2PingResultOk | read-only | current | Indicates the result of the operation: -true. The L2Ping Message(s) will be (or have been) sent. -false. The L2Ping Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.34.1.14 | ColumnrcCfmTransmitL2PingStatus | read-write | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Ping messages. -… |
| 1.3.6.1.4.1.2272.1.69.34.1.15 | ColumnrcCfmTransmitL2PingResult | read-only | current | Display the L2Ping result. |
| 1.3.6.1.4.1.2272.1.69.35 | TablercCfmTransmitL2TraceTable | not-accessible | current | Connectivity Fault Management transmit L2Trace table |
| 1.3.6.1.4.1.2272.1.69.35.1 | RowrcCfmTransmitL2TraceEntry | not-accessible | current | Connectivity Fault Management Maintenance EndPoint L2Trace entry. |
| 1.3.6.1.4.1.2272.1.69.35.1.1 | ColumnrcCfmTransmitL2TraceVlanId | not-accessible | current | A value that uniquely identifies the Customer Vlan |
| 1.3.6.1.4.1.2272.1.69.35.1.2 | ColumnrcCfmTransmitL2TracePriority | read-write | current | Priority. 3 bit value to be used in the VLAN hdr, if present in the transmitted frame. |
| 1.3.6.1.4.1.2272.1.69.35.1.3 | ColumnrcCfmTransmitL2TraceDestMacAddress | read-write | current | An indication of the target MAC Address field to be transmitted |
| 1.3.6.1.4.1.2272.1.69.35.1.4 | ColumnrcCfmTransmitL2TraceHostName | read-write | current | The target host name |
| 1.3.6.1.4.1.2272.1.69.35.1.5 | ColumnrcCfmTransmitL2TraceIsid | read-write | current | Isid Id |
| 1.3.6.1.4.1.2272.1.69.35.1.6 | ColumnrcCfmTransmitL2TraceNickName | read-only | current | Local Node nick name |
| 1.3.6.1.4.1.2272.1.69.35.1.7 | ColumnrcCfmTransmitL2TraceDestIsHostName | read-write | current | True indicates that the host name is used for L2Trace transmission |
| 1.3.6.1.4.1.2272.1.69.35.1.8 | ColumnrcCfmTransmitL2TraceIsidTree | read-write | current | True indicates that the multicast tree will be traced. False indicates that the unicast path will be traced |
| 1.3.6.1.4.1.2272.1.69.35.1.9 | ColumnrcCfmTransmitL2TraceTtl | read-write | current | The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 … |
| 1.3.6.1.4.1.2272.1.69.35.1.10 | ColumnrcCfmTransmitL2TraceSourceMode | read-write | current | Source modes of the transmit loopback service. |
| 1.3.6.1.4.1.2272.1.69.35.1.11 | ColumnrcCfmTransmitL2TraceSeqNumber | read-only | current | The transaction identifier/sequence number of the first loopback message (to be) sent. |
| 1.3.6.1.4.1.2272.1.69.35.1.12 | ColumnrcCfmTransmitL2TraceResultOk | read-only | current | Indicates the result of the operation: -true. The L2Trace Message(s) will be (or have been) sent. -false. The L2Trace Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.35.1.13 | ColumnrcCfmTransmitL2TraceStatus | read-write | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. … |
| 1.3.6.1.4.1.2272.1.69.35.1.14 | ColumnrcCfmTransmitL2TraceFlag | read-only | current | L2Trace result flag indicating L2Trace status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Inv… |
| 1.3.6.1.4.1.2272.1.69.36 | TablercCfmL2TraceReplyTable | not-accessible | current | This table contains a list of l2trace replies received by a specific MEP in response to a linktrace message. |
| 1.3.6.1.4.1.2272.1.69.36.1 | RowrcCfmL2TraceReplyEntry | not-accessible | current | The Linktrace Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.36.1.1 | ColumnrcCfmL2TraceReplyVlanId | not-accessible | current | A value that uniquely identifies the Customer Vlan |
| 1.3.6.1.4.1.2272.1.69.36.1.2 | ColumnrcCfmL2TraceReplySeqNumber | not-accessible | current | The transaction identifier/sequence number returned by a previous transmit linktrace message command, indicating which L2Trace's response is going to be return… |
| 1.3.6.1.4.1.2272.1.69.36.1.3 | ColumnrcCfmL2TraceReplyHop | not-accessible | current | The number of hops away from L2Trace initiator. |
| 1.3.6.1.4.1.2272.1.69.36.1.4 | ColumnrcCfmL2TraceReplyReceiveOrder | not-accessible | current | An index to distinguish among multiple L2Trace responses with the same Transaction Identifier field value. This value is assigned sequentially from 1, in the o… |
| 1.3.6.1.4.1.2272.1.69.36.1.5 | ColumnrcCfmL2TraceReplyTtl | read-only | current | Ttl field value for a returned L2Trace response. |
| 1.3.6.1.4.1.2272.1.69.36.1.6 | ColumnrcCfmL2TraceReplySrcMac | read-only | current | Mac address of the MP that respond to the L2Trace request for this L2traceReply |
| 1.3.6.1.4.1.2272.1.69.36.1.7 | ColumnrcCfmL2TraceReplyHostName | read-only | current | The host name of the replying node |
| 1.3.6.1.4.1.2272.1.69.36.1.8 | ColumnrcCfmL2TraceReplyLastSrcMac | read-only | current | The MAC address of the node that forwarded the L2Trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.36.1.9 | ColumnrcCfmL2TraceReplyLastHostName | read-only | current | The host name of the node that forwarded the L2Trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.37 | TablercCfmTransmitL2IpPingTable | not-accessible | current | Connectivity Fault Management transmit L2IpPing table |
| 1.3.6.1.4.1.2272.1.69.37.1 | RowrcCfmTransmitL2IpPingEntry | not-accessible | current | L2IpPing entry. |
| 1.3.6.1.4.1.2272.1.69.37.1.1 | ColumnrcCfmTransmitL2IpPingIpAddrType | not-accessible | current | The address type of destination IP Address |
| 1.3.6.1.4.1.2272.1.69.37.1.2 | ColumnrcCfmTransmitL2IpPingIpAddr | not-accessible | current | Destination IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.37.1.3 | ColumnrcCfmTransmitL2IpPingVrfId | read-only | current | VRF ID |
| 1.3.6.1.4.1.2272.1.69.37.1.4 | ColumnrcCfmTransmitL2IpPingVrfName | read-only | current | The Name of the Virtual Router |
| 1.3.6.1.4.1.2272.1.69.37.1.5 | ColumnrcCfmTransmitL2IpPingMessages | read-create | current | The number of L2IpPing messages to be transmitted per mac/vlan pair. |
| 1.3.6.1.4.1.2272.1.69.37.1.6 | ColumnrcCfmTransmitL2IpPingTimeoutInt | read-create | current | The interval to wait for an L2IpPing time-out with a range of (1..10) seconds with a default value of 3 seconds. |
| 1.3.6.1.4.1.2272.1.69.37.1.7 | ColumnrcCfmTransmitL2IpPingTestPattern | read-create | current | The test pattern to use in the L2IpPing PDUs with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a… |
| 1.3.6.1.4.1.2272.1.69.37.1.8 | ColumnrcCfmTransmitL2IpPingDataSize | read-create | current | An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent. |
| 1.3.6.1.4.1.2272.1.69.37.1.9 | ColumnrcCfmTransmitL2IpPingStatus | read-create | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2IpPing messages.… |
| 1.3.6.1.4.1.2272.1.69.37.1.10 | ColumnrcCfmTransmitL2IpPingResultOk | read-only | current | Indicates the result of the operation: -true. L2IpPing Message(s) will be/have been sent. -false. L2IpPing Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.37.1.11 | ColumnrcCfmTransmitL2IpPingPathsFound | read-only | current | The number of paths found to execute l2ping command |
| 1.3.6.1.4.1.2272.1.69.37.1.12 | ColumnrcCfmTransmitL2IpPingRowStatus | read-create | current | Used to create/delete entries in the rcCfmTransmitL2IpPingTable. Deletion of an entry in this table results in corresponding rcCfmL2IpPingReplyTable entries be… |
| 1.3.6.1.4.1.2272.1.69.38 | TablercCfmL2IpPingReplyTable | not-accessible | current | This table contains a list of l2 ip ping replies received |
| 1.3.6.1.4.1.2272.1.69.38.1 | RowrcCfmL2IpPingReplyEntry | not-accessible | current | The L2 Ip Ping Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.38.1.1 | ColumnrcCfmL2IpPingReplyIpAddrType | not-accessible | current | The address type of destination IP Address |
| 1.3.6.1.4.1.2272.1.69.38.1.2 | ColumnrcCfmL2IpPingReplyIpAddr | not-accessible | current | Destination IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.38.1.3 | ColumnrcCfmL2IpPingReplySendOrder | not-accessible | current | An index to distinguish among multiple L2Ping sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to t… |
| 1.3.6.1.4.1.2272.1.69.38.1.4 | ColumnrcCfmL2IpPingReplyVrfId | read-only | current | VRF ID |
| 1.3.6.1.4.1.2272.1.69.38.1.5 | ColumnrcCfmL2IpPingReplyVlanId | read-only | current | Vlan found from L3 lookup and used for transmission |
| 1.3.6.1.4.1.2272.1.69.38.1.6 | ColumnrcCfmL2IpPingReplyDestMacAddress | read-only | current | An indication of the target MAC Address transmitted |
| 1.3.6.1.4.1.2272.1.69.38.1.7 | ColumnrcCfmL2IpPingReplyPortNum | read-only | current | Either the value '0', or the port number of the port used for the l2ping. |
| 1.3.6.1.4.1.2272.1.69.38.1.8 | ColumnrcCfmL2IpPingReplyDestHostName | read-only | current | The host name of the responding node |
| 1.3.6.1.4.1.2272.1.69.38.1.9 | ColumnrcCfmL2IpPingReplySize | read-only | current | The number of bytes of data sent |
| 1.3.6.1.4.1.2272.1.69.38.1.10 | ColumnrcCfmL2IpPingReplyPktsTx | read-only | current | Number of Packets transmitted for this vlan/mac |
| 1.3.6.1.4.1.2272.1.69.38.1.11 | ColumnrcCfmL2IpPingReplyPktsRx | read-only | current | Number of Packets received for this vlan/mac |
| 1.3.6.1.4.1.2272.1.69.38.1.12 | ColumnrcCfmL2IpPingReplyPercentLossWhole | read-only | current | Percentage of packet loss for this vlan/mac |
| 1.3.6.1.4.1.2272.1.69.38.1.13 | ColumnrcCfmL2IpPingReplyPercentLossFract | read-only | current | Percentage of packet loss for this vlan/mac |
| 1.3.6.1.4.1.2272.1.69.38.1.14 | ColumnrcCfmL2IpPingReplyMinRoundTrip | read-only | current | Min time for round-trip for this vlan/mac in us |
| 1.3.6.1.4.1.2272.1.69.38.1.15 | ColumnrcCfmL2IpPingReplyMaxRoundTrip | read-only | current | Max time for round-trip for this vlan/mac in us |
| 1.3.6.1.4.1.2272.1.69.38.1.16 | ColumnrcCfmL2IpPingReplyRttAvgWhole | read-only | current | Average time for round-trip for this vlan/mac in us |
| 1.3.6.1.4.1.2272.1.69.38.1.17 | ColumnrcCfmL2IpPingReplyRttAvgFract | read-only | current | Fractional portion of Average time for round-trip |
| 1.3.6.1.4.1.2272.1.69.38.1.18 | ColumnrcCfmL2IpPingReplyFlag | read-only | current | Result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - Internal Error 3 - Invalid Ip 4 - L2Trace comp… |
| 1.3.6.1.4.1.2272.1.69.39 | TablercCfmTransmitL2IpTraceTable | not-accessible | current | Connectivity Fault Management transmit L2IpTrace table |
| 1.3.6.1.4.1.2272.1.69.39.1 | RowrcCfmTransmitL2IpTraceEntry | not-accessible | current | L2IpTrace entry. |
| 1.3.6.1.4.1.2272.1.69.39.1.1 | ColumnrcCfmTransmitL2IpTraceIpAddrType | not-accessible | current | The address type of destination IP Address |
| 1.3.6.1.4.1.2272.1.69.39.1.2 | ColumnrcCfmTransmitL2IpTraceIpAddr | not-accessible | current | Destination IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.39.1.3 | ColumnrcCfmTransmitL2IpTraceVrfId | read-only | current | VRF ID |
| 1.3.6.1.4.1.2272.1.69.39.1.4 | ColumnrcCfmTransmitL2IpTraceVrfName | read-only | current | The Name of the Virtual Router |
| 1.3.6.1.4.1.2272.1.69.39.1.5 | ColumnrcCfmTransmitL2IpTraceTtl | read-create | current | The number of hops remaining to this L2Trace. Decremented by 1 by each Bridge that handles the L2Trace. The decremented value is returned in the L2Trace. If 0 … |
| 1.3.6.1.4.1.2272.1.69.39.1.6 | ColumnrcCfmTransmitL2IpTraceStatus | read-create | current | Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the L2Trace messages. … |
| 1.3.6.1.4.1.2272.1.69.39.1.7 | ColumnrcCfmTransmitL2IpTraceResultOk | read-only | current | Indicates the result of the operation: -true. The Trace Message(s) will be/have been sent. -false. The Trace Message(s) will not be sent. |
| 1.3.6.1.4.1.2272.1.69.39.1.8 | ColumnrcCfmTransmitL2IpTracePathsFound | read-only | current | The number of paths found to execute l2trace command |
| 1.3.6.1.4.1.2272.1.69.39.1.9 | ColumnrcCfmTransmitL2IpTraceRowStatus | read-create | current | Used to create/delete entries in the rcCfmTransmitL2IpTraceTable. Deletion of an entry in this table results in corresponding rcCfmL2IpTraceReplyTable entries … |
| 1.3.6.1.4.1.2272.1.69.40 | TablercCfmL2IpTraceReplyTable | not-accessible | current | This table contains a list of l2 ip trace replies received by a specific MEP in response to a linktrace message. |
| 1.3.6.1.4.1.2272.1.69.40.1 | RowrcCfmL2IpTraceReplyEntry | not-accessible | current | The L2 Ip Trace Reply table entry. |
| 1.3.6.1.4.1.2272.1.69.40.1.1 | ColumnrcCfmL2IpTraceReplyIpAddrType | not-accessible | current | The address type of destination IP Address |
| 1.3.6.1.4.1.2272.1.69.40.1.2 | ColumnrcCfmL2IpTraceReplyIpAddr | not-accessible | current | Destination IP Address. Support ipv4 at this time |
| 1.3.6.1.4.1.2272.1.69.40.1.3 | ColumnrcCfmL2IpTraceReplySendOrder | not-accessible | current | An index to distinguish among multiple L2Trace sessions This value is assigned sequentially from 1. It denotes order that sessions were sent. It correlates to … |
| 1.3.6.1.4.1.2272.1.69.40.1.4 | ColumnrcCfmL2IpTraceReplyHop | not-accessible | current | The number of L2 hops away from L2Trace initiator. |
| 1.3.6.1.4.1.2272.1.69.40.1.5 | ColumnrcCfmL2IpTraceReplyReceiveOrder | not-accessible | current | An index to distinguish among multiple L2Trace responses with the same Send Transaction Identifier field value. This value is assigned sequentially from 1, in … |
| 1.3.6.1.4.1.2272.1.69.40.1.6 | ColumnrcCfmL2IpTraceReplyTtl | read-only | current | Ttl field value for a returned L2Trace response. |
| 1.3.6.1.4.1.2272.1.69.40.1.7 | ColumnrcCfmL2IpTraceReplyVrfId | read-only | current | VRF ID |
| 1.3.6.1.4.1.2272.1.69.40.1.8 | ColumnrcCfmL2IpTraceReplyVlanId | read-only | current | Vlan found from L3 lookup and used for transmission |
| 1.3.6.1.4.1.2272.1.69.40.1.9 | ColumnrcCfmL2IpTraceReplyDestMacAddress | read-only | current | An indication of the target MAC Address transmitted |
| 1.3.6.1.4.1.2272.1.69.40.1.10 | ColumnrcCfmL2IpTraceReplySeqNumber | read-only | current | The transaction identifier/sequence number used in linktrace message packet |
| 1.3.6.1.4.1.2272.1.69.40.1.11 | ColumnrcCfmL2IpTraceReplyPortNum | read-only | current | Either the value '0', or the port number of the port used for the l2trace. |
| 1.3.6.1.4.1.2272.1.69.40.1.12 | ColumnrcCfmL2IpTraceReplySrcMac | read-only | current | Mac address of the MP that responded to L2Trace request for this L2traceReply |
| 1.3.6.1.4.1.2272.1.69.40.1.13 | ColumnrcCfmL2IpTraceReplyHostName | read-only | current | The host name of the replying node |
| 1.3.6.1.4.1.2272.1.69.40.1.14 | ColumnrcCfmL2IpTraceReplyLastSrcMac | read-only | current | The MAC address of the node that forwarded the L2Trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.40.1.15 | ColumnrcCfmL2IpTraceReplyLastHostName | read-only | current | The host name of the node that forwarded the L2Trace to the responding node |
| 1.3.6.1.4.1.2272.1.69.40.1.16 | ColumnrcCfmL2IpTraceReplyFlag | read-only | current | L2Trace result flag indicating status or error code. Each enum value represents a status or error case. 1 - No error 2 - L2Trace Internal Error 3 - Invalid Mac… |
| 1.3.6.1.4.1.2272.1.71 | NodercPlugOptMod | |||
| 1.3.6.1.4.1.2272.1.71.1 | TablercPlugOptModTable | not-accessible | current | Gibc SFF diagnostic info table |
| 1.3.6.1.4.1.2272.1.71.1.1 | RowrcPlugOptModEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.71.1.1.1 | ColumnrcPlugOptModPortIndex | read-only | current | An index value that uniquely identifies a port on a blade or line-card. |
| 1.3.6.1.4.1.2272.1.71.1.1.2 | ColumnrcPlugOptModDdmStatusMask | read-only | current | Each bit other than ddm-ok represents a specific error. Any combination of error bits is allowed. |
| 1.3.6.1.4.1.2272.1.71.1.1.3 | ColumnrcPlugOptModCalibration | read-only | current | The identifier value indicates type of calibration. |
| 1.3.6.1.4.1.2272.1.71.1.1.4 | ColumnrcPlugOptModPowerMeasure | read-only | current | The identifier value indicates type of external power. |
| 1.3.6.1.4.1.2272.1.71.1.1.5 | ColumnrcPlugOptModConnectorType | read-only | current | The connector type is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. This is an assigned name tha… |
| 1.3.6.1.4.1.2272.1.71.1.1.6 | ColumnrcPlugOptModVendorName | read-only | current | The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces. The vendor name shall be the fu… |
| 1.3.6.1.4.1.2272.1.71.1.1.7 | ColumnrcPlugOptModVendorPartNumber | read-only | current | The vendor part number is a 16 byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor part numb… |
| 1.3.6.1.4.1.2272.1.71.1.1.8 | ColumnrcPlugOptModVendorRevNumber | read-only | current | The vendor revision number is a 4-byte field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor produc… |
| 1.3.6.1.4.1.2272.1.71.1.1.9 | ColumnrcPlugOptModVendorSN | read-only | current | The vendor serial number is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces, defining the vendor se… |
| 1.3.6.1.4.1.2272.1.71.1.1.10 | ColumnrcPlugOptModVendorDateCode | read-only | current | The date code is an 8-byte field that contains the vendor's date code in ASCII. This field is mandatory and takes the form: YYMMDDLC where YY is the 2 low orde… |
| 1.3.6.1.4.1.2272.1.71.1.1.11 | ColumnrcPlugOptModPEC | read-only | current | This is a 16 byte left-justified ASCII field that records the Nortel Product Equipment Code order number for the module. Nortel part numbers are 9 bytes long, … |
| 1.3.6.1.4.1.2272.1.71.1.1.12 | ColumnrcPlugOptModCLEI | read-only | current | This is a 10 byte left-justified ASCII field that records the Nortel supplied Common Language Equipment Identifier code for the device. The CLEI code is a Telc… |
| 1.3.6.1.4.1.2272.1.71.1.1.13 | ColumnrcPlugOptModSupportsDDM | read-only | current | This boolean indicates whether or not the device supports the DDM capability. |
| 1.3.6.1.4.1.2272.1.71.1.1.14 | ColumnrcPlugOptModAux1Monitoring | read-only | current | This value tells what Aux1 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved 3 T… |
| 1.3.6.1.4.1.2272.1.71.1.1.15 | ColumnrcPlugOptModAux2Monitoring | read-only | current | This value tells you what AUX2 is measuring.The values are as follows: 0 Auxiliary monitoring not implemented 1 APD Bias Voltage mV (units of 10 mV) 2 Reserved… |
| 1.3.6.1.4.1.2272.1.71.1.1.16 | ColumnrcPlugOptModWaveLength | read-only | current | Nominal transmitter output wavelength at room temperature. It is expressed in nano-meters. |
| 1.3.6.1.4.1.2272.1.71.1.1.17 | ColumnrcPlugOptModTemperature | read-only | current | This value represents the internally measured module temperature. It is expressed in units of 1/256 of a degree Celsius and can range from -40C to +125C with 0… |
| 1.3.6.1.4.1.2272.1.71.1.1.18 | ColumnrcPlugOptModTemperatureHighAlarmThreshold | read-only | current | This value represents the vendor specified high temperature threshold. If the device temperature exceeds this value, a temperature high is asserted. It is expr… |
| 1.3.6.1.4.1.2272.1.71.1.1.19 | ColumnrcPlugOptModTemperatureLowAlarmThreshold | read-only | current | This value represents the vendor specified low temperature threshold. If the device temperature falls below this value, a temperature low is asserted. It is ex… |
| 1.3.6.1.4.1.2272.1.71.1.1.20 | ColumnrcPlugOptModTemperatureHighWarningThreshold | read-only | current | This value represents the vendor specified high temperature warning threshold. If the device temperature exceeds this value, a temperature high warning is asse… |
| 1.3.6.1.4.1.2272.1.71.1.1.21 | ColumnrcPlugOptModTemperatureLowWarningThreshold | read-only | current | This value represents the vendor specified low temperature warning threshold. If the device temperature falls below this value, a temperature low warning is as… |
| 1.3.6.1.4.1.2272.1.71.1.1.22 | ColumnrcPlugOptModVoltage | read-only | current | This value represents the internally measured supply voltage. It is a positive number expressed in microvolts and can range from 0 to 65535 mV. |
| 1.3.6.1.4.1.2272.1.71.1.1.23 | ColumnrcPlugOptModVoltageHighAlarmThreshold | read-only | current | This value represents the vendor specified high voltage threshold. If the measured voltage exceeds this value, a high voltage is asserted. It is a positive num… |
| 1.3.6.1.4.1.2272.1.71.1.1.24 | ColumnrcPlugOptModVoltageLowAlarmThreshold | read-only | current | This value represents the vendor specified low voltage threshold. If the measured voltage falls below this value, a low voltage is asserted. It is a positive n… |
| 1.3.6.1.4.1.2272.1.71.1.1.25 | ColumnrcPlugOptModVoltageHighWarningThreshold | read-only | current | This value represents the vendor specified high voltage warning threshold. If the measured voltage exceeds this value, a high voltage warning is asserted. It i… |
| 1.3.6.1.4.1.2272.1.71.1.1.26 | ColumnrcPlugOptModVoltageLowWarningThreshold | read-only | current | This value represents the vendor specified low voltage warning threshold. If the measured voltage falls below this value, a low voltage warning is asserted. It… |
| 1.3.6.1.4.1.2272.1.71.1.1.27 | ColumnrcPlugOptModBias | read-only | current | This value represents the internally measured transmitter laser bias current. It is a positive number expressed in units of 2 microamps and can range from 0 to… |
| 1.3.6.1.4.1.2272.1.71.1.1.28 | ColumnrcPlugOptModBiasHighAlarmThreshold | read-only | current | This value represents the vendor specified high current threshold. If the measured bias current exceeds this value, a high current alarm is asserted. It is a p… |
| 1.3.6.1.4.1.2272.1.71.1.1.29 | ColumnrcPlugOptModBiasLowAlarmThreshold | read-only | current | This value represents the vendor specified low current threshold. If the measured bias current falls below this value, a low current is asserted. It is a posit… |
| 1.3.6.1.4.1.2272.1.71.1.1.30 | ColumnrcPlugOptModBiasHighWarningThreshold | read-only | current | This value represents the vendor specified high current warning threshold. If the measured bias current exceeds this value, a high current warning is asserted.… |
| 1.3.6.1.4.1.2272.1.71.1.1.31 | ColumnrcPlugOptModBiasLowWarningThreshold | read-only | current | This value represents the vendor specified low current warning threshold. If the measured bias current falls below this value, a low current warning is asserte… |
| 1.3.6.1.4.1.2272.1.71.1.1.32 | ColumnrcPlugOptModTxPower | read-only | current | This value represents the internally measured coupled TX output power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535… |
| 1.3.6.1.4.1.2272.1.71.1.1.33 | ColumnrcPlugOptModTxPowerHighAlarmThreshold | read-only | current | This value represents the vendor specified high transmit power threshold. If the measured transmitter power exceeds this value, a transmitter power high is ass… |
| 1.3.6.1.4.1.2272.1.71.1.1.34 | ColumnrcPlugOptModTxPowerLowAlarmThreshold | read-only | current | This value represents the vendor specified low transmit power threshold. If the measured transmitter power falls below this value, a transmitter power low is a… |
| 1.3.6.1.4.1.2272.1.71.1.1.35 | ColumnrcPlugOptModTxPowerHighWarningThreshold | read-only | current | This value represents the vendor specified high transmit power warning threshold. If the measured transmitter power exceeds this value, a transmitter power hig… |
| 1.3.6.1.4.1.2272.1.71.1.1.36 | ColumnrcPlugOptModTxPowerLowWarningThreshold | read-only | current | This value represents the vendor specified low transmit power warning threshold. If the measured transmitter power falls below this value, a transmitter power … |
| 1.3.6.1.4.1.2272.1.71.1.1.37 | ColumnrcPlugOptModRxPower | read-only | current | This value represents the internally measured received power. It is a positive number expressed in units of micro watts and can range from 0 to 65.535 mW (-40 … |
| 1.3.6.1.4.1.2272.1.71.1.1.38 | ColumnrcPlugOptModRxPowerHighAlarmThreshold | read-only | current | This value represents the vendor specified high receiver power threshold. If the measured received power exceeds this value, a receiver power high is asserted.… |
| 1.3.6.1.4.1.2272.1.71.1.1.39 | ColumnrcPlugOptModRxPowerLowAlarmThreshold | read-only | current | This value represents the vendor specified low receiver power threshold. If the measured received power falls below this value, a receiver power low is asserte… |
| 1.3.6.1.4.1.2272.1.71.1.1.40 | ColumnrcPlugOptModRxPowerHighWarningThreshold | read-only | current | This value represents the vendor specified high receiver power warning threshold. If the measured received power exceeds this value, a receiver power high warn… |
| 1.3.6.1.4.1.2272.1.71.1.1.41 | ColumnrcPlugOptModRxPowerLowWarningThreshold | read-only | current | This value represents the vendor specified low receiver power warning threshold. If the measured received power falls below this value, a receiver power low wa… |
| 1.3.6.1.4.1.2272.1.71.1.1.42 | ColumnrcPlugOptModAux1 | read-only | current | This represents the internally measured A/D value specified. |
| 1.3.6.1.4.1.2272.1.71.1.1.43 | ColumnrcPlugOptModAux1HighAlarmThreshold | read-only | current | This value represents the vendor specified high Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.44 | ColumnrcPlugOptModAux1LowAlarmThreshold | read-only | current | This value represents the vendor specified low Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.45 | ColumnrcPlugOptModAux1HighWarningThreshold | read-only | current | This value represents the vendor specified high Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.46 | ColumnrcPlugOptModAux1LowWarningThreshold | read-only | current | This value represents the vendor specified low Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.47 | ColumnrcPlugOptModAux2 | read-only | current | This represents the internally measured A/D value specified. |
| 1.3.6.1.4.1.2272.1.71.1.1.48 | ColumnrcPlugOptModAux2HighAlarmThreshold | read-only | current | This value represents the vendor specified high Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.49 | ColumnrcPlugOptModAux2LowAlarmThreshold | read-only | current | This value represents the vendor specified low Aux1 threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.50 | ColumnrcPlugOptModAux2HighWarningThreshold | read-only | current | This value represents the vendor specified high Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.51 | ColumnrcPlugOptModAux2LowWarningThreshold | read-only | current | This value represents the vendor specified low Aux1 warning threshold. |
| 1.3.6.1.4.1.2272.1.71.1.1.52 | ColumnrcPlugOptModTemperatureStatus | read-only | current | Used to indicate the current temperature status |
| 1.3.6.1.4.1.2272.1.71.1.1.53 | ColumnrcPlugOptModVoltageStatus | read-only | current | Used to indicate the current voltage status |
| 1.3.6.1.4.1.2272.1.71.1.1.54 | ColumnrcPlugOptModBiasStatus | read-only | current | Used to indicate the current laser bias status |
| 1.3.6.1.4.1.2272.1.71.1.1.55 | ColumnrcPlugOptModTxPowerStatus | read-only | current | Used to indicate the current transmitter power status |
| 1.3.6.1.4.1.2272.1.71.1.1.56 | ColumnrcPlugOptModRxPowerStatus | read-only | current | Used to indicate the current receiver power status |
| 1.3.6.1.4.1.2272.1.71.1.1.57 | ColumnrcPlugOptModAux1Status | read-only | current | Used to indicate the current Aux1 status |
| 1.3.6.1.4.1.2272.1.71.1.1.58 | ColumnrcPlugOptModAux2Status | read-only | current | Used to indicate the current Aux2 status |
| 1.3.6.1.4.1.2272.1.71.2 | NodercPlugOptModScalars | |||
| 1.3.6.1.4.1.2272.1.71.2.1 | ScalarrcPlugOptModDdmMonitor | read-write | current | Enable/disable the global polling monitor for DDM |
| 1.3.6.1.4.1.2272.1.71.2.2 | ScalarrcPlugOptModDdmMonitorInterval | read-write | current | Indicate the interval in which the DDM alert registers is polled |
| 1.3.6.1.4.1.2272.1.71.2.3 | ScalarrcPlugOptModDdmTrapSend | read-write | current | Enable/disable the global ddm trap send to SNMP manager |
| 1.3.6.1.4.1.2272.1.71.2.4 | ScalarrcPlugOptModDdmAlarmPortdown | read-write | current | Enable/disable the global portdown option when ddm alarm occurs |
| 1.3.6.1.4.1.2272.1.73 | NodercVrrp | |||
| 1.3.6.1.4.1.2272.1.73.1 | NodercVrrpMib | |||
| 1.3.6.1.4.1.2272.1.73.1.1 | NodercVrrpObjects | |||
| 1.3.6.1.4.1.2272.1.73.1.1.1 | NodercVrrpScalars | |||
| 1.3.6.1.4.1.2272.1.73.1.1.1.1 | ScalarrcVrrpPingVirtualAddrEnable | read-write | current | Used to configure whether this device should respond to pings directed to a virtual router's IP address. |
| 1.3.6.1.4.1.2272.1.73.1.1.1.2 | ScalarrcVrrpTrapStateTransitionType | read-only | current | Potential types of state transitions. Used by rcVrrpTrapStateTransition trap. |
| 1.3.6.1.4.1.2272.1.73.1.1.1.3 | ScalarrcVrrpTrapStateTransitionCause | read-only | current | Potential types of causes that will generate a rcVrrpTrapStateTransition trap. |
| 1.3.6.1.4.1.2272.1.73.1.1.2 | TablercVrrpOperTable | not-accessible | current | Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'rcVrrpOperEntry' items. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1 | RowrcVrrpOperEntry | not-accessible | current | An entry in the rcVrrpOperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a com… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.1 | ColumnrcVrrpOperIfIndex | not-accessible | current | port interface index. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.2 | ColumnrcVrrpOperVrId | read-only | current | This object contains the Virtual Router Identifier (VRID). |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.3 | ColumnrcVrrpOperIpAddr | read-write | current | The assigned IP addresses that a virtual router is responsible for backing up. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.4 | ColumnrcVrrpOperVirtualMacAddr | read-only | current | The virtual MAC address of the virtual router. This is derived as follows: 00-00-5E-00-01-<VRID>. Where the first three octets consist of the IANA's OUI; The n… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.5 | ColumnrcVrrpOperState | read-only | current | The current state of the virtual router. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.6 | ColumnrcVrrpOperControl | read-write | current | This object will enable/disable the virtual router function. Setting the value to 'enabled', will transition the state of the router from 'initialize to 'backu… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.7 | ColumnrcVrrpOperPriority | read-write | current | This object specifies the priority for the virtual router (e.g., master election) with respect to other virtual routers that are backing up a one or more assoc… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.8 | ColumnrcVrrpOperIpAddrCount | read-only | current | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond … |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.9 | ColumnrcVrrpOperMasterIpAddr | read-only | current | The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.10 | ColumnrcVrrpOperAuthType | read-write | current | Authentication type used for VRRP protocol exchanges between virtual routers. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.11 | ColumnrcVrrpOperAuthKey | read-write | current | The Authentication Key. If the virtual router's Authorization Type is 'simpleTextPassword', and the key length is shorter than 8 octets, the agent will left ad… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.12 | ColumnrcVrrpOperHMACMD5Key | read-write | current | The Authentication Key. If the virtual router's 'Authorization Type' is 'ipAuthenticationHeader', and the key length is shorter than 16 octets, the agent will … |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.13 | ColumnrcVrrpOperAdvertisementInterval | read-write | current | This is the time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.14 | ColumnrcVrrpOperPreemptMode | read-write | current | Controls whether a higher priority virtual router will preempt a lower priority master. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.15 | ColumnrcVrrpOperVirtualRouterUpTime | read-only | current | This is the time interval (in hundredths of a second) since this virtual router was initialized. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.16 | ColumnrcVrrpOperRowStatus | read-write | current | The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to 'createAndGo' results in enabling t… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.17 | ColumnrcVrrpOperCriticalIpAddr | read-write | current | IP address of the interface that will cause a shutdown event. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.18 | ColumnrcVrrpOperHoldDownTimer | read-write | current | Used to configure the amount of time (in seconds) to wait before preempting the current vrrp master. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.19 | ColumnrcVrrpOperHoldDownState | read-only | current | Used to indicate the hold-down state of this vrrp interface. If the hold-down timer is operational this variable will be set to 'active'. 'dormant' otherwise. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.20 | ColumnrcVrrpOperHoldDownTimeRemaining | read-only | current | Used to indicate the amount of time (in seconds) left before the rcVrrpOperHoldDownTimer will expire. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.21 | ColumnrcVrrpOperAction | read-write | current | Used to trigger an action on this vrrp interface. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.22 | ColumnrcVrrpOperCriticalIpAddrEnable | read-write | current | Indicate if an user-defined critical IP address should be enabled. 'NO' = use the default IP address (0.0.0.0). No effect if an user-defined IP address does no… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.23 | ColumnrcVrrpOperBackUpMaster | read-write | current | Enable the backup VRRP switch traffic forwarding. This will reduce the traffic in IST link in the time of SMLT. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.24 | ColumnrcVrrpOperBackUpMasterState | read-only | current | Indicate whether backup VRRP switch traffic forwarding is enabled or not. |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.25 | ColumnrcVrrpOperFasterAdvInterval | read-write | current | This is the faster advertisement interval, in milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, t… |
| 1.3.6.1.4.1.2272.1.73.1.1.2.1.26 | ColumnrcVrrpOperFasterAdvIntervalEnable | read-write | current | Used to indicate if the Faster Advertisement Interval should be used. 'Disable' means use regular Advertisement interval. |
| 1.3.6.1.4.1.2272.1.73.1.1.3 | TablercVrrpRouterStatsTable | not-accessible | current | Table of virtual router statistics. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1 | RowrcVrrpRouterStatsEntry | not-accessible | current | An entry in the table, containing statistics information about a given virtual router. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.1 | ColumnrcVrrpStatsIfIndex | read-only | current | port interface index. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.2 | ColumnrcVrrpStatsVrId | read-only | current | This object contains the Virtual Router Identifier (VRID). |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.3 | ColumnrcVrrpStatsBecomeMaster | read-only | current | The total number of times that this virtual router's state has transitioned from BACKUP to MASTER. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.4 | ColumnrcVrrpStatsAdvertiseRcvd | read-only | current | The total number of VRRP advertisements received by this virtual router. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.5 | ColumnrcVrrpStatsAdvertiseIntervalErrors | read-only | current | The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.6 | ColumnrcVrrpStatsPasswdSecurityViolations | read-only | current | The total number of VRRP packets received that do not pass the simple text password authentification check. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.7 | ColumnrcVrrpStatsHmacSecurityViolations | read-only | current | The total number of VRRP packets received that do not pass the HMAC-MD5-96 authentification check. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.8 | ColumnrcVrrpStatsIpTtlErrors | read-only | current | The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.9 | ColumnrcVrrpStatsPriorityZeroPktsRcvd | read-only | current | The total number of VRRP packets received by the virtual router with a priority of '0'. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.10 | ColumnrcVrrpStatsPriorityZeroPktsSent | read-only | current | The total number of VRRP packets sent by the virtual router with a priority of '0'. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.11 | ColumnrcVrrpStatsInvalidTypePktsRcvd | read-only | current | The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.12 | ColumnrcVrrpStatsAddressListErrors | read-only | current | Packets received address list the address list does not match the locally configured list for the virtual router. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.13 | ColumnrcVrrpStatsUnknownAuthType | read-only | current | Packets received with an unknown authentication type. |
| 1.3.6.1.4.1.2272.1.73.1.1.3.1.14 | ColumnrcVrrpStatsAuthTypeErrors | read-only | current | Packets received with 'Auth Type' not equal to the locally configured authentication method ('vrrpOperAuthType'). |
| 1.3.6.1.4.1.2272.1.73.1.2 | NodercVrrpNotifications | |||
| 1.3.6.1.4.1.2272.1.73.1.2.1 | NotificationrcVrrpTrapStateTransition | current | A rcVrrpTrapStateTransition trap signifies a state transition has occurred on a particular vrrp interface. Implementation of this trap is optional. | |
| 1.3.6.1.4.1.2272.1.74 | NodercMpls | |||
| 1.3.6.1.4.1.2272.1.74.1 | NodercMplsMib | |||
| 1.3.6.1.4.1.2272.1.74.1.0 | NodercMplsNotifications | |||
| 1.3.6.1.4.1.2272.1.74.1.1 | NodercMplsObjects | |||
| 1.3.6.1.4.1.2272.1.74.1.1.1 | NodercMplsGlobalGroup | |||
| 1.3.6.1.4.1.2272.1.74.1.1.1.1 | NodercMplsGlobalScalars | |||
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.1 | ScalarrcMplsRouterId | read-write | current | IP address of the circuitless interface to be used as router-id |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.2 | ScalarrcMplsLdpAdminStatus | read-write | current | State of global LDP - enabled or disabled |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.3 | ScalarrcMplsLdpPenultimateHopPop | read-write | current | State of global LDP Penultimate Hop Popping. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.4 | ScalarrcMplsLdpHelloHoldTimer | read-write | current | The global Hello Hold Time in seconds. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.5 | ScalarrcMplsLdpSessionKeepAlive | read-write | current | The global Session Keep alive in seconds. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.6 | ScalarrcMplsLdpPathVectorLimit | read-write | current | The global path vector limit. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.7 | ScalarrcMplsLdpHopCountLimit | read-write | current | The global loop detect hop count limit. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.8 | ScalarrcMplsLdpEgressPolicyStatus | read-write | current | State of LDP Egress-policy enabled or disabled |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.9 | ScalarrcMplsRsvpAdminStatus | read-write | current | State of global RSVP - enabled or disabled |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.10 | ScalarrcMplsRsvpPenultimateHopPop | read-write | current | State of global RSVP Penultimate Hop Popping. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.11 | ScalarrcMplsRsvpHelloInterval | read-write | current | The global RSVP hello interval. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.12 | ScalarrcMplsRsvpRefreshReduction | read-write | current | State of global RSVP refresh reduction - enabled or disabled |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.13 | ScalarrcMplsRsvpRefreshInterval | read-write | current | The global value for RSVP refresh interval. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.14 | ScalarrcMplsRsvpRefreshMultiplier | read-write | current | The global value for RSVP refresh multiplier. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.15 | ScalarrcMplsRsvpMessageBundling | read-write | current | State of global RSVP message bundling - enabled or disabled |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.16 | ScalarrcMplsLspIngressStartLabel | read-write | current | The global ingress rsp start label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.17 | ScalarrcMplsLspEgressStartLabel | read-write | current | The global egress rsp start label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.18 | ScalarrcMplsLspIngressPktEnable | read-write | current | Enable/Disable ingress rsp pkt lsp stats |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.19 | ScalarrcMplsLspEgressPktEnable | read-write | current | Enable/Disable egress rsp pkt lsp stats |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.20 | ScalarrcMplsLdpClearStats | read-write | current | Clear global LDP Statistics. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.21 | ScalarrcMplsRsvpClearStats | read-write | current | Clear global RSVP Statistics. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.1.22 | ScalarrcMplsLspClearStats | read-write | current | Clear 'transmit' or 'receive' lsp statistics. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2 | TablercMplsIpStaticFecTable | not-accessible | current | This is the table of ip-static fec mappings for both RSVP and LDP . |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1 | RowrcMplsIpStaticFecEntry | not-accessible | current | A static fec mapping to an rsvp lsp or ldp egress IP address. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.1 | ColumnrcMplsIpStaticFecDest | not-accessible | current | The statically-configured destination IP address. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.2 | ColumnrcMplsIpStaticFecMask | not-accessible | current | The statically-configured destination IP mask. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.3 | ColumnrcMplsIpStaticFecTunnelName | read-create | current | The rsvp lsp tunnel name associated with rcMplsIpStaticFecTunnelId. This field will be null if the value of rcMplsIpStaticFecTunnelId is 0. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.4 | ColumnrcMplsIpStaticFecTunnelId | read-create | current | The rsvp lsp tunnel index (from mplsTunnelTable defined in rfc3812) if this is an rsvp Ip statically mapped address. This field will be 0 if this is an LDP Egr… |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.5 | ColumnrcMplsIpStaticFecEgressAddr | read-create | current | The LDP Egress IP Address. This field will be 0 if this is an rsvp tunnel fec mapping. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.6 | ColumnrcMplsIpStaticFecEgressMask | read-create | current | The LDP Egress IP Mask. This field will be 0 if this is an rsvp tunnel fec mapping. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.7 | ColumnrcMplsIpStaticFecState | read-only | current | Indicates the actual operational status of this static fec. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.2.1.8 | ColumnrcMplsIpStaticFecRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3 | TablercMplsIpFtnTable | not-accessible | current | This is the table of mpls Ip FTN. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1 | RowrcMplsIpFtnEntry | not-accessible | current | An mpls FTN entry . |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.1 | ColumnrcMplsIpFtnDest | not-accessible | current | The FTN destination IP address. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.2 | ColumnrcMplsIpFtnMask | not-accessible | current | The FTN destination IP mask. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.3 | ColumnrcMplsIpFtnType | read-only | current | The FTN next hop label type. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.4 | ColumnrcMplsIpFtnOutLabel | read-only | current | The FTN outgoing label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.5 | ColumnrcMplsIpFtnOutIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.74.1.1.1.3.1.6 | ColumnrcMplsIpFtnNextHop | read-only | current | The FTN next hop Ip Address. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4 | TablercMplsIpIlmTable | not-accessible | current | This is the table of mpls Incoming Label Mapping. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4.1 | RowrcMplsIpIlmEntry | not-accessible | current | An mpls Incoming Label Map entry . |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.1 | ColumnrcMplsIpIlmInLabel | not-accessible | current | The Incoming Label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.2 | ColumnrcMplsIpIlmInIfIndex | read-only | current | The index value which uniquely identifies the incoming interface to which this entry is applicable. The interface identified by a particular value of this inde… |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.3 | ColumnrcMplsIpIlmOutLabel | read-only | current | The Outgoing Label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.4 | ColumnrcMplsIpIlmOutIfIndex | read-only | current | The index value which uniquely identifies the outgoing interface to which this entry is applicable. The interface identified by a particular value of this inde… |
| 1.3.6.1.4.1.2272.1.74.1.1.1.4.1.5 | ColumnrcMplsIpIlmNextHop | read-only | current | The next hop Ip Address. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.5 | TablercMplsIngressLspStatTable | not-accessible | current | This is the table of mpls Incoming Label Stats. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.5.1 | RowrcMplsIngressLspStatEntry | not-accessible | current | An mpls Incoming Label Stat entry . |
| 1.3.6.1.4.1.2272.1.74.1.1.1.5.1.1 | ColumnrcMplsIngressLspPort | not-accessible | current | The incoming port for the lsp. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.5.1.2 | ColumnrcMplsIngressLspLabel | not-accessible | current | The Incoming Lsp Label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.5.1.3 | ColumnrcMplsIngressLspPkts | read-only | current | Count of incoming packets for the corresponding lsp and port. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.6 | TablercMplsEgressLspStatTable | not-accessible | current | This is the table of mpls OutGoing Label Stats. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.6.1 | RowrcMplsEgressLspStatEntry | not-accessible | current | An mpls OutGoing Label Stat entry . |
| 1.3.6.1.4.1.2272.1.74.1.1.1.6.1.1 | ColumnrcMplsEgressLspPort | not-accessible | current | The OutGoing port for the lsp. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.6.1.2 | ColumnrcMplsEgressLspLabel | not-accessible | current | The OutGoing Lsp Label. |
| 1.3.6.1.4.1.2272.1.74.1.1.1.6.1.3 | ColumnrcMplsEgressLspPkts | read-only | current | Count of outgoing packets for the corresponding lsp and port. |
| 1.3.6.1.4.1.2272.1.74.1.1.2 | NodercMplsRsvpGroup | |||
| 1.3.6.1.4.1.2272.1.74.1.1.2.1 | NodercMplsRsvpSummaryGroup | |||
| 1.3.6.1.4.1.2272.1.74.1.1.2.1.1 | ScalarrcMplsRsvpSummaryVersion | read-only | current | This is the RSVP version number. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.1.2 | ScalarrcMplsRsvpSummaryState | read-only | current | This is the RSVP protocol state. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.1.3 | ScalarrcMplsRsvpSummaryLSPRetryTimer | read-only | current | This is the retry timer (secs) for the LSPs starting from this node, in case of failure. A value of zero means no retry on LSPs. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.1.4 | ScalarrcMplsRsvpSummaryLSPRetryLimit | read-only | current | This is the retry limit for the LSPs starting from this node. It indicates how many times an LSP is retried before giving up. A value of zero means try infinit… |
| 1.3.6.1.4.1.2272.1.74.1.1.2.1.5 | ScalarrcMplsRsvpSummaryLSPDecayRate | read-only | current | This is the decay rate (percent) for LSPs starting on this node. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.1.6 | ScalarrcMplsRsvpSummaryPHP | read-only | current | This is the configured RSVP PHP support on this node. Possible values are implicit-null, explicit-null, or disabled. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2 | TablercMplsRsvpTunnelExtTable | not-accessible | current | This is the table of mpls rsvp tunnels. This table supplements the mplsTunnelTable from rfc3812. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1 | RowrcMplsRsvpTunnelExtEntry | not-accessible | current | An entry in the mpls tunnel table. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.1 | ColumnrcMplsRsvpTunnelExtIndex | not-accessible | current | The Tunnel Index. The value of this object should mimic the value of mplsTunnelIndex of the MplsTunnelEntry of the mpls tunnel for which this extended tunnel t… |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.2 | ColumnrcMplsRsvpTunnelExtInstance | not-accessible | current | The Tunnel Instance. The value of this object should mimic the value of mplsTunnelInstance of the MplsTunnelEntry of the mpls tunnel for which this extended tu… |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.3 | ColumnrcMplsRsvpTunnelExtIngressLSRId | not-accessible | current | The Rsvp Tunnel Ingress LSR Id. The value of this object should mimic the value of the mplsTunnelIngressLSRId of the MplsTunnelEntry of the mpls tunnel for whi… |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.4 | ColumnrcMplsRsvpTunnelExtEgressLSRId | not-accessible | current | The Rsvp Tunnel Egress LSR Id. The value of this object should mimic the value of the mplsTunnelEgressLSRId of the MplsTunnelEntry of the mpls tunnel for which… |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.5 | ColumnrcMplsRsvpTunnelExtName | read-write | current | The Name of the tunnel associated with this LSP. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.6 | ColumnrcMplsRsvpTunnelExtSwitchover | read-write | current | Switch this LSP from active status to inactive status or vice versa. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.7 | ColumnrcMplsRsvpTunnelExtActiveStatus | read-only | current | This is 'true' if this is the active LSP of the tunnel. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.8 | ColumnrcMplsRsvpTunnelExtResStyle | read-only | current | This is the reservation style of the tunnel. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.9 | ColumnrcMplsRsvpTunnelExtLspId | read-only | current | This is the LSP Id of this LSP. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.10 | ColumnrcMplsRsvpTunnelExtERO | read-only | current | This is the Explicit Route associated with this LSP. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.11 | ColumnrcMplsRsvpTunnelExtRRO | read-only | current | This is the Recorded Route associated with this LSP. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.12 | ColumnrcMplsRsvpTunnelExtInIfIndex | read-only | current | This is the incoming interface for the LSP. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.13 | ColumnrcMplsRsvpTunnelExtInLabel | read-only | current | This is the incoming Mpls Label. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.14 | ColumnrcMplsRsvpTunnelExtInNeighbor | read-only | current | This address of the previous-hop (upstream) router. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.15 | ColumnrcMplsRsvpTunnelExtOutIfIndex | read-only | current | This is the outgoing interface for the LSP. This applies to rows with mplsTunnelRole set to head(1) or transit(2). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.16 | ColumnrcMplsRsvpTunnelExtOutLabel | read-only | current | This is the outgoing Mpls Label. This applies to rows with mplsTunnelRole set to head(1) or transit(2). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.17 | ColumnrcMplsRsvpTunnelExtOutNeighbor | read-only | current | This address of the next-hop (downstream) router. This applies to rows with applies to rows with mplsTunnelRole set to head(1) or transit(2). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.18 | ColumnrcMplsRsvpTunnelExtTSpecRate | read-only | current | This is the primary LSP TSpec Rate. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.19 | ColumnrcMplsRsvpTunnelExtTSpecSize | read-only | current | This is the primary LSP TSpec Size. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.20 | ColumnrcMplsRsvpTunnelExtTSpecPeak | read-only | current | This is the primary LSP TSpec Peak. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.21 | ColumnrcMplsRsvpTunnelExtTSpecMin | read-only | current | This is the primary LSP TSpec Min. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.22 | ColumnrcMplsRsvpTunnelExtTSpecMax | read-only | current | This is the primary lsp TSpec Max. This applies to rows with mplsTunnelRole set to transit(2) or tail(3). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.23 | ColumnrcMplsRsvpTunnelExtInstanceUpTime | read-only | current | This is the time (in 100ths of a second) that this instance has been in the Oper 'Up' state. When the instance transitions out of the Oper 'Up' state the time … |
| 1.3.6.1.4.1.2272.1.74.1.1.2.2.1.24 | ColumnrcMplsRsvpTunnelExtLSPUpTime | read-only | current | This is the time (in 100ths of a second) that all instances of this LSP have been in the Oper Up state. The time is calculated based on the create time of the … |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3 | TablercMplsRsvpNeighborTable | not-accessible | current | This is the table of mpls rsvp neighbors. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1 | RowrcMplsRsvpNeighborEntry | not-accessible | current | An entry in the mpls rsvp tunnel table. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.1 | ColumnrcMplsRsvpNeighborAddress | not-accessible | current | This is the address of a learned neighbor. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.2 | ColumnrcMplsRsvpNeighborHelloState | read-only | current | This is the state of hello exchange with the neighbor. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.3 | ColumnrcMplsRsvpNeighborIfIndex | read-only | current | This is the interface index of the neighbor. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.4 | ColumnrcMplsRsvpNeighborTime | read-only | current | This is the time the neighbor was learned. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.5 | ColumnrcMplsRsvpNeighborPeriod | read-only | current | This is the RSVP Hello Interval. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.6 | ColumnrcMplsRsvpNeighborSendCnt | read-only | current | This is the number of Hello packets sent to the neighbor. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.7 | ColumnrcMplsRsvpNeighborRcvCnt | read-only | current | This is the number of Hellp packets received from the neighbor. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.8 | ColumnrcMplsRsvpNeighborLocalInstance | read-only | current | This is the identification sent to the remote router during Hello message exchange. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.9 | ColumnrcMplsRsvpNeighborRemoteInstance | read-only | current | This is the identification provided by the remote router during Hello message exchange. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.10 | ColumnrcMplsRsvpNeighborCreationTime | read-only | current | This is the time the neighbor instance was created. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.11 | ColumnrcMplsRsvpNeighborLastPktRxTime | read-only | current | This is the time that the last Hello message was received from the remote router. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.3.1.12 | ColumnrcMplsRsvpNeighborRefReduction | read-only | current | This is the refresh-reduction status between the local router and the neighbor. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4 | TablercMplsRsvpInterfaceTable | not-accessible | current | This is the table of mpls rsvp interfaces. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1 | RowrcMplsRsvpInterfaceEntry | not-accessible | current | An entry in the mpls rsvp interface table. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.1 | ColumnrcMplsRsvpInterfaceIfIndex | not-accessible | current | This is the interface index. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.2 | ColumnrcMplsRsvpInterfaceAddress | read-only | current | This is the address of the interface. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.3 | ColumnrcMplsRsvpInterfaceRefreshInterval | read-only | current | This is the RSVP refresh interval for the interface(seconds). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.4 | ColumnrcMplsRsvpInterfaceRefreshMult | read-only | current | This is the configured RSVP refresh multiplier for the interface(seconds). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.5 | ColumnrcMplsRsvpInterfaceHelloInterval | read-only | current | This is the configured RSVP Hello Interval of the interface (seconds). |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.6 | ColumnrcMplsRsvpInterfaceRefreshReduction | read-only | current | This is the configured RSVP refresh reduction support on the interface. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.4.1.7 | ColumnrcMplsRsvpInterfaceMessageBundling | read-only | current | This indicates state of message bundling on the interface. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5 | TablercMplsRsvpStatsTable | not-accessible | current | This is the table of mpls rsvp statistics. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1 | RowrcMplsRsvpStatsEntry | not-accessible | current | An entry in the mpls rsvp statistics table. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.1 | ColumnrcMplsRsvpStatsIfIndex | not-accessible | current | This is the interface index. This value can be 0 or a valid interface index. When 0 the global rsvp statistics are retrieved. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.2 | ColumnrcMplsRsvpStatsPathRcv | read-only | current | This is the path received count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.3 | ColumnrcMplsRsvpStatsPathSent | read-only | current | This is the path sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.4 | ColumnrcMplsRsvpStatsPathErrRcv | read-only | current | This is the path error receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.5 | ColumnrcMplsRsvpStatsPathErrSent | read-only | current | This is the path error sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.6 | ColumnrcMplsRsvpStatsPathTearRcv | read-only | current | This is the path tear receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.7 | ColumnrcMplsRsvpStatsPathTearSent | read-only | current | This is the path tear sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.8 | ColumnrcMplsRsvpStatsResvRcv | read-only | current | This is the reservation received count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.9 | ColumnrcMplsRsvpStatsResvSent | read-only | current | This is the reservation sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.10 | ColumnrcMplsRsvpStatsResvErrRcv | read-only | current | This is the reservation error receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.11 | ColumnrcMplsRsvpStatsResvErrSent | read-only | current | This is the reservation error sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.12 | ColumnrcMplsRsvpStatsResvTearRcv | read-only | current | This is the resv tear receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.13 | ColumnrcMplsRsvpStatsResvTearSent | read-only | current | This is the resv tear sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.14 | ColumnrcMplsRsvpStatsConfTearRcv | read-only | current | This is the conf tear receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.15 | ColumnrcMplsRsvpStatsConfTearSent | read-only | current | This is the conf tear sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.16 | ColumnrcMplsRsvpStatsAckRcv | read-only | current | This is the acks receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.17 | ColumnrcMplsRsvpStatsAckSent | read-only | current | This is the acks sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.18 | ColumnrcMplsRsvpStatsSRefreshRcv | read-only | current | This is the summary refresh receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.19 | ColumnrcMplsRsvpStatsSRefreshSent | read-only | current | This is the summary refresh sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.20 | ColumnrcMplsRsvpStatsHelloReqRcv | read-only | current | This is the hello request receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.21 | ColumnrcMplsRsvpStatsHelloReqSent | read-only | current | This is the hello request sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.22 | ColumnrcMplsRsvpStatsHelloAckRcv | read-only | current | This is the hello ack receives count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.23 | ColumnrcMplsRsvpStatsHelloAckSent | read-only | current | This is the hello ack sent count. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.24 | ColumnrcMplsRsvpStatsBadIpHdr | read-only | current | This is the count of pkts with bad IP Header. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.25 | ColumnrcMplsRsvpStatsBadVersion | read-only | current | This is the count of pkts with Bad Version. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.26 | ColumnrcMplsRsvpStatsBadRsvpLen | read-only | current | This is the count of pkts with Bad Rsvp length. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.27 | ColumnrcMplsRsvpStatsBadCksum | read-only | current | This is the count of pkts with Bad Checksum. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.28 | ColumnrcMplsRsvpStatsBadMsgType | read-only | current | This is the count of pkts with Bad Message type. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.29 | ColumnrcMplsRsvpStatsBadMsgForm | read-only | current | This is the count of pkts with Bad Message Form. |
| 1.3.6.1.4.1.2272.1.74.1.1.2.5.1.30 | ColumnrcMplsRsvpStatsBadIntf | read-only | current | This is the count of pkts received on a Bad Interface. |
| 1.3.6.1.4.1.2272.1.74.1.1.3 | NodercMplsLdpGroup | |||
| 1.3.6.1.4.1.2272.1.74.1.1.3.1 | NodercMplsLdpSummaryGroup | |||
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.1 | ScalarrcMplsLdpSummaryIntAdjCount | read-only | current | This is the LDP summary index. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.2 | ScalarrcMplsLdpSummaryExtAdjCount | read-only | current | This is the LDP summary index. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.3 | ScalarrcMplsLdpSummarySessionCount | read-only | current | This is the LDP summary session count. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.4 | ScalarrcMplsLdpSummaryRouteCount | read-only | current | This is the LDP summary route count. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.5 | ScalarrcMplsLdpSummaryLdpId | read-only | current | This is the LDP summary Local LDP Id. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.6 | ScalarrcMplsLdpSummaryLspCount | read-only | current | This is the LDP summary LSP count. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.7 | ScalarrcMplsLdpSummaryInSegCount | read-only | current | This is the LDP summary in segment count. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.8 | ScalarrcMplsLdpSummaryOutSegCount | read-only | current | This is the LDP summary out segment count. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.1.9 | ScalarrcMplsLdpSummaryRedistConn | read-only | current | This is the LDP policy redist enable flag. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2 | TablercMplsLdpDiscoveryTable | not-accessible | current | This is the table of mpls ldp discoveries. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1 | RowrcMplsLdpDiscoveryEntry | not-accessible | current | An entry in the mpls ldp discovery table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.1 | ColumnrcMplsLdpDiscoveryIfIndex | not-accessible | current | This is the interface index. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.2 | ColumnrcMplsLdpDiscoveryPeerLdpId | not-accessible | current | This is the peer ldp id. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.3 | ColumnrcMplsLdpDiscoveryPeerTransportAddr | read-only | current | This is the peer transport address to which an LDP session has been provisioned. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.4 | ColumnrcMplsLdpDiscoveryNegotiatedHoldTime | read-only | current | This is the hold time negotiated between peers. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.5 | ColumnrcMplsLdpDiscoveryConfSeqNum | read-only | current | This is the configured sequence number sent by the peer. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.2.1.6 | ColumnrcMplsLdpDiscoveryExtendedDiscovery | read-only | current | If set to 1, extended discovery is enabled. If set to 0, basic discovery is enabled. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3 | TablercMplsLdpPathTable | not-accessible | current | This is the table of mpls LDP Paths between a local peer and a remote peer. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3.1 | RowrcMplsLdpPathEntry | not-accessible | current | An entry in the mpls ldp path table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.1 | ColumnrcMplsLdpPathType | not-accessible | current | This is the path type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC_… |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.2 | ColumnrcMplsLdpPathAddrType | not-accessible | current | This is the path address type. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.3 | ColumnrcMplsLdpPathAddrPrefixLength | not-accessible | current | This is the path address prefix length. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.4 | ColumnrcMplsLdpPathAddr | not-accessible | current | This is the path address. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.3.1.5 | ColumnrcMplsLdpPathInLabel | read-only | current | This is the path address prefix length. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4 | TablercMplsLdpPathRemotePeerTable | not-accessible | current | This is the table of LDP paths to a given remote peer. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1 | RowrcMplsLdpPathRemotePeerEntry | not-accessible | current | An entry in the mpls ldp path remote peer table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.1 | ColumnrcMplsLdpPathRemotePeerType | not-accessible | current | This is the path type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC_… |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.2 | ColumnrcMplsLdpPathRemotePeerAddrType | not-accessible | current | This is the type of the path address. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.3 | ColumnrcMplsLdpPathRemotePeerAddrPrefixLength | not-accessible | current | This is the path address prefix length. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.4 | ColumnrcMplsLdpPathRemotePeerAddr | not-accessible | current | This is the path address. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.5 | ColumnrcMplsLdpPathRemotePeerId | not-accessible | current | This is the Id of the remote peer of the path. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.6 | ColumnrcMplsLdpPathRemotePeerLdpId | read-only | current | This is the LDP Id of the remote peer of the path. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.7 | ColumnrcMplsLdpPathRemotePeerOutLabel | read-only | current | This is the Out Label for this instance of the Remote Peer Id. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.4.1.8 | ColumnrcMplsLdpPathRemotePeerState | read-only | current | This is the state of the remote peer. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5 | TablercMplsLdpRouteTable | not-accessible | current | This is the table of mpls ldp routes. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1 | RowrcMplsLdpRouteEntry | not-accessible | current | An entry in the mpls ldp route table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.1 | ColumnrcMplsLdpRouteType | not-accessible | current | This is the route type. ATG_NHR_LDP_FEC_TYPE_NONE 0 ATG_NHR_LDP_FEC_TYPE_HOST 1 ATG_NHR_LDP_FEC_TYPE_PREFIX 2 ATG_NHR_LDP_FEC_TYPE_VC 3 ATG_NHR_LDP_FEC_TYPE_VC… |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.2 | ColumnrcMplsLdpRouteAddrType | not-accessible | current | This is the route address prefix length. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.3 | ColumnrcMplsLdpRouteAddrPrefixLength | not-accessible | current | This is the route address prefix length. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.4 | ColumnrcMplsLdpRouteAddr | not-accessible | current | This is the route address. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.5 | ColumnrcMplsLdpRouteIfIndex | read-only | current | This is the interface index of the route entry. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.6 | ColumnrcMplsLdpRouteNextHopAddrType | read-only | current | This is the address type of the next hop. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.5.1.7 | ColumnrcMplsLdpRouteNextHopAddr | read-only | current | This is the address of the next hop. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6 | TablercMplsLdpSessionTable | not-accessible | current | This is the table of mpls ldp sessions. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1 | RowrcMplsLdpSessionEntry | not-accessible | current | An entry in the mpls ldp session table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.1 | ColumnrcMplsLdpSessionEntityLdpId | not-accessible | current | This is the entity LDP ID for the session. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.2 | ColumnrcMplsLdpSessionEntityIndex | not-accessible | current | This is the entity LDP ID for the session. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.3 | ColumnrcMplsLdpSessionPeerLdpId | not-accessible | current | This is the peer LDP ID for the session. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.4 | ColumnrcMplsLdpSessionStateLastChange | read-only | current | The time this Session entered its current state as denoted by the rcMplsLdpSessionState object. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.5 | ColumnrcMplsLdpSessionState | read-only | current | The current state of the session, all of the states 1 to 5 are based on the state machine for session negotiation behavior 1- nonexistent, 2- initialized, 3- o… |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.6 | ColumnrcMplsLdpSessionRole | read-only | current | During session establishment the LSR/LER takes either the active role or the passive role based on address comparisons. This object indicates whether this LSR/… |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.7 | ColumnrcMplsLdpSessionProtocolVersion | read-only | current | This is the protocol version. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.8 | ColumnrcMplsLdpSessionKeepAliveHoldTimeRem | read-only | current | This is the session keep alive hold time remaining. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.9 | ColumnrcMplsLdpSessionKeepAliveTime | read-only | current | This is the session keep alive time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.10 | ColumnrcMplsLdpSessionMaxPduLength | read-only | current | This is the session's max pdu length. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.11 | ColumnrcMplsLdpSessionDiscontinuityTime | read-only | current | This is the session's discontinuity time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.12 | ColumnrcMplsLdpSessionHoldTime | read-only | current | This is the session's hold time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.13 | ColumnrcMplsLdpSessionUpTime | read-only | current | This is the session's up time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.14 | ColumnrcMplsLdpSessionMessagesSent | read-only | current | This is the session total messages sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.6.1.15 | ColumnrcMplsLdpSessionMessagesRecv | read-only | current | This is the session total messages received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7 | TablercMplsLdpInterfaceTable | not-accessible | current | This is the table of mpls ldp interface. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1 | RowrcMplsLdpInterfaceEntry | not-accessible | current | An entry in the mpls ldp interface table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.1 | ColumnrcMplsLdpInterfaceIfIndex | not-accessible | current | This is the LDP interface if index. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.2 | ColumnrcMplsLdpInterfaceNbrCount | read-only | current | This is the number of neighbors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.3 | ColumnrcMplsLdpInterfaceNextHello | read-only | current | This is the next hello time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.4 | ColumnrcMplsLdpInterfaceConfHoldTime | read-only | current | This is the configured hello hold time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.5 | ColumnrcMplsLdpInterfaceNegHoldTime | read-only | current | This is the negotiated hello hold time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.6 | ColumnrcMplsLdpInterfaceHelloInterval | read-only | current | This is one third of the negotiated hello hold time. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8 | TablercMplsLdpStatsTable | not-accessible | current | This is the table of mpls ldp statistics. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1 | RowrcMplsLdpStatsEntry | not-accessible | current | An entry in the mpls ldp statistics table. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.1 | ColumnrcMplsLdpStatsPeerAddress | not-accessible | current | This is the LDP Peer Address key for search. This value can be a valid peer address or 0.0.0.0. If 0.0.0.0 then global LDP statistics are retrieved. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.2 | ColumnrcMplsLdpStatsNotifyRecv | read-only | current | This is the count of notifications received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.3 | ColumnrcMplsLdpStatsNotifySent | read-only | current | This is the count of notifications sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.4 | ColumnrcMplsLdpStatsHelloRecv | read-only | current | This is the count of hellos received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.5 | ColumnrcMplsLdpStatsHelloSent | read-only | current | This is the count of hellos sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.6 | ColumnrcMplsLdpStatsInitRecv | read-only | current | This is the count of initializations received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.7 | ColumnrcMplsLdpStatsInitSent | read-only | current | This is the count of initializations sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.8 | ColumnrcMplsLdpStatsKeepRecv | read-only | current | This is the count of keep alives received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.9 | ColumnrcMplsLdpStatsKeepSent | read-only | current | This is the count of keep alives sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.10 | ColumnrcMplsLdpStatsAddrRecv | read-only | current | This is the count of addrs received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.11 | ColumnrcMplsLdpStatsAddrSent | read-only | current | This is the count of addrs sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.12 | ColumnrcMplsLdpStatsAddrWdrRecv | read-only | current | This is the count of addr withdraws received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.13 | ColumnrcMplsLdpStatsAddrWdrSent | read-only | current | This is the count of addr withdraws sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.14 | ColumnrcMplsLdpStatsLabelMapRecv | read-only | current | This is the count of label maps received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.15 | ColumnrcMplsLdpStatsLabelMapSent | read-only | current | This is the count of label maps sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.16 | ColumnrcMplsLdpStatsLabelReqRecv | read-only | current | This is the count of label reqs received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.17 | ColumnrcMplsLdpStatsLabelReqSent | read-only | current | This is the count of label reqs sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.18 | ColumnrcMplsLdpStatsLabelWdrRecv | read-only | current | This is the count of label withdraws received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.19 | ColumnrcMplsLdpStatsLabelWdrSent | read-only | current | This is the count of label withdraws sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.20 | ColumnrcMplsLdpStatsLabelRelRecv | read-only | current | This is the count of label withdraws received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.21 | ColumnrcMplsLdpStatsLabelRelSent | read-only | current | This is the count of label withdraws sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.22 | ColumnrcMplsLdpStatsLabelAbrRecv | read-only | current | This is the count of label aborts received. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.23 | ColumnrcMplsLdpStatsLabelAbrSent | read-only | current | This is the count of label aborts sent. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.24 | ColumnrcMplsLdpStatsSessionUp | read-only | current | This is the count of session up. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.25 | ColumnrcMplsLdpStatsSessionDown | read-only | current | This is the count of session down. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.26 | ColumnrcMplsLdpStatsBadLdpIdentifierErrors | read-only | current | This is the count of bad LDP ID errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.27 | ColumnrcMplsLdpStatsBadPduLengthErrors | read-only | current | This is the count of Bad PDU length errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.28 | ColumnrcMplsLdpStatsBadMessageLengthErrors | read-only | current | This is the count of bad message length errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.29 | ColumnrcMplsLdpStatsUnknownMessageErrors | read-only | current | This is the count of unknown message errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.30 | ColumnrcMplsLdpStatsUnknownTlvErrors | read-only | current | This is the count of unknown TLV errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.31 | ColumnrcMplsLdpStatsBadTlvLengthErrors | read-only | current | This is the count of bad TLV Length errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.32 | ColumnrcMplsLdpStatsMalformedTlvValueErrors | read-only | current | This is the count of Malinformed TLV value errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.33 | ColumnrcMplsLdpStatsHoldTimerExpErrors | read-only | current | This is the count of hold time expired errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.34 | ColumnrcMplsLdpStatsSessionRejectedNoHelloErrors | read-only | current | This is the count of session reject - no hello errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.35 | ColumnrcMplsLdpStatsSessionRejectedBadParmAdvErrors | read-only | current | This is the count of session reject - bad parameter advertisement errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.36 | ColumnrcMplsLdpStatsSessionRejectedMaxPduErrors | read-only | current | This is the count of session reject - Max PDU Errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.37 | ColumnrcMplsLdpStatsSessionRejectedBadLabelRangeErrors | read-only | current | This is the count of session reject - Bad Label Range errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.38 | ColumnrcMplsLdpStatsSessionRejectedSetupAbortErrors | read-only | current | This is the count of session reject - Setup Abort errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.39 | ColumnrcMplsLdpStatsSessionRejectedBadKeepaliveErrors | read-only | current | This is the count of session reject - Bad Keepalive Errors. |
| 1.3.6.1.4.1.2272.1.74.1.1.3.8.1.40 | ColumnrcMplsLdpStatsSessionOtherErrors | read-only | current | This is the count of other errors. |
| 1.3.6.1.4.1.2272.1.74.1.2 | NodercMplsNotificationObjects | |||
| 1.3.6.1.4.1.2272.1.74.1.2.1 | ScalarrcMplsLdpStatusNotificationEnable | read-write | current | If this object is true, then it enables the generation of LDP Session Up or Down Traps, otherwise these traps are not emitted. |
| 1.3.6.1.4.1.2272.1.74.1.2.2 | ScalarrcMplsLdpSessionThresholdNotificationEnable | read-write | current | If this object is true, then it enables the generation of LDP Session Threshold Exceeded Traps, otherwise these traps are not emitted. |
| 1.3.6.1.4.1.2272.1.74.1.2.3 | ScalarrcMplsLdpPathVectorLimitNotificationEnable | read-write | current | If this object is true, then it enables the generation of LDP Path Vector Limit Exceeded Traps, otherwise these traps are not emitted. |
| 1.3.6.1.4.1.2272.1.76 | NodercIpMRoute | |||
| 1.3.6.1.4.1.2272.1.76.1 | NodercIpMRouteMIBObjects | |||
| 1.3.6.1.4.1.2272.1.76.1.1 | NodercIpMRouteScalars | |||
| 1.3.6.1.4.1.2272.1.76.1.1.2 | ScalarrcIpMRouteStatsEnabled | read-write | current | The enabled status of IP Multicast statistics. |
| 1.3.6.1.4.1.2272.1.76.1.1.3 | ScalarrcIpMRouteStatsClear | read-write | current | Clear ip mroute stats. |
| 1.3.6.1.4.1.2272.1.76.1.6 | TablercIpMRouteStatsTable | not-accessible | current | the table containing IP Multicast statistics. |
| 1.3.6.1.4.1.2272.1.76.1.6.1 | RowrcIpMRouteStatsEntry | not-accessible | current | An entry containing the ip multicast statistics information for the specific group ip address. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.1 | ColumnrcIpMRouteStatsGroupAddress | not-accessible | current | the IP multicast group address for which this entry contains ip multicast statistics. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.2 | ColumnrcIpMRouteStatsSourceCount | read-only | current | The number of sources corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.3 | ColumnrcIpMRouteStatsPkts | read-only | current | The total number of frames that are processed corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.4 | ColumnrcIpMRouteStatsBytes | read-only | current | The total number of bytes that are processed corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.5 | ColumnrcIpMRouteStatsAverageSizePerPkt | read-only | current | The average length of packets that are processed corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.6 | ColumnrcIpMRouteStatsDropPkts | read-only | current | The total number of drop frames that are processed corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.7 | ColumnrcIpMRouteStatsDropBytes | read-only | current | The total number of drop bytes that are processed corresponding to the specific group and vrf. |
| 1.3.6.1.4.1.2272.1.76.1.6.1.8 | ColumnrcIpMRouteStatsPktsPerSecond | read-only | current | The number of packets that are processed corresponding to the specific group and vrf in one second. |
| 1.3.6.1.4.1.2272.1.78 | NodercPlsb | |||
| 1.3.6.1.4.1.2272.1.78.1 | NodercPlsbGlobal | |||
| 1.3.6.1.4.1.2272.1.78.1.1 | ScalarrcPlsbGlobalVlans | read-write | current | PLSB vlan entry. |
| 1.3.6.1.4.1.2272.1.78.1.2 | ScalarrcPlsbGlobalEnable | read-write | current | Enable/Disable PLSB global flag. |
| 1.3.6.1.4.1.2272.1.78.1.3 | ScalarrcPlsbGlobalMsti | read-write | current | MSTI instance ID for PLSB VLANS |
| 1.3.6.1.4.1.2272.1.78.1.4 | ScalarrcPlsbGlobalEtherType | read-write | current | SPBM Ethertype |
| 1.3.6.1.4.1.2272.1.85 | NodercKhi | |||
| 1.3.6.1.4.1.2272.1.85.1 | NodercKhiConfig | |||
| 1.3.6.1.4.1.2272.1.85.1.1 | ScalarrcKhiConfigKhiAdminState | read-write | current | Key Health Inidaction, this object is used turn off the KHI feature administratively. true(1) means On, false(2) means off. By default, it is always set to tru… |
| 1.3.6.1.4.1.2272.1.85.1.2 | ScalarrcKhiConfigKhiBootDelay | read-write | current | Time interval from system up and running to start the KHI feature. Set to 0 to disable to the time interval. |
| 1.3.6.1.4.1.2272.1.85.1.3 | ScalarrcKhiConfigClearAction | read-write | current | Clear action with bits set. 0 Bit means from left (most significant) bit to right (least significant) bit. |
| 1.3.6.1.4.1.2272.1.85.1.4 | ScalarrcKhiConfigPortKhiAdminState | read-write | current | Key Health Indication, this object is used to turn off the Port KHI feature administratively. true(1) means On, false(2) means off. By default, it is always se… |
| 1.3.6.1.4.1.2272.1.85.1.5 | ScalarrcKhiConfigPerfKhiAdminState | read-write | current | Key Health Indication, this object is used to turn off the Performance KHI feature administratively. true(1) means On, false(2) means off. By default, it is al… |
| 1.3.6.1.4.1.2272.1.85.1.6 | ScalarrcKhiConfigChasKhiAdminState | read-write | current | Key Health Inidcation, this object is used to turn off the Chassis KHI feature administratively. true(1) means On, false(2) means off. By default, it is always… |
| 1.3.6.1.4.1.2272.1.85.1.7 | ScalarrcKhiConfigForwardingKhiAdminState | read-write | current | Key Health Indication, this object is used to turn off the Forwarding KHI feature administratively. true(1) means On, false(2) means off. By default, it is alw… |
| 1.3.6.1.4.1.2272.1.85.1.9 | ScalarrcKhiConfigForwardingClearSlot | read-write | current | Clear KHI Forwarding stats for a particular Slot |
| 1.3.6.1.4.1.2272.1.85.10 | NodercKhiSlot | |||
| 1.3.6.1.4.1.2272.1.85.10.1 | TablercKhiSlotPerfTable | not-accessible | current | Slot Performance Information |
| 1.3.6.1.4.1.2272.1.85.10.1.1 | RowrcKhiSlotPerfEntry | not-accessible | current | Slot Performance Entry |
| 1.3.6.1.4.1.2272.1.85.10.1.1.1 | ColumnrcKhiSlotIndex | not-accessible | current | An unique index used to identify the slot |
| 1.3.6.1.4.1.2272.1.85.10.1.1.2 | ColumnrcKhiSlotCpuCurrentUtil | read-only | current | Percentage CPU utilization under current operating conditions. Value is in tenth's of a percent. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.3 | ColumnrcKhiSlotCpu5MinAve | read-only | current | Average percentage CPU utilization over the past 5 minutes. Value is in tenth's of a percent. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.4 | ColumnrcKhiSlotCpu5MinHi | read-only | current | Hi watermark for percentage CPU utilization over the past 5 minutes. Value is in tenth's of a percent. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.5 | ColumnrcKhiSlotCpu5MinHiTime | read-only | current | Last time at which sampling occured. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.6 | ColumnrcKhiSlotMemUsed | read-only | current | The amount of DRAM memory consumed in KB. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.7 | ColumnrcKhiSlotMemFree | read-only | current | The amount of DRAM memory available in KB. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.8 | ColumnrcKhiSlotMemUtil | read-only | current | Current percentage of memory utilization. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.9 | ColumnrcKhiSlotMem5MinAve | read-only | current | Average percentage of memory utilization over the past 5 minutes. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.10 | ColumnrcKhiSlotMem5MinHi | read-only | current | High watermark for percentage memory utilization over the past 5 minutes. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.11 | ColumnrcKhiSlotMem5MinHiTime | read-only | current | The last time memory information was registered. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.12 | ColumnrcKhiSlotUsedFbuf | read-only | current | The number of Fbufs in use. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.13 | ColumnrcKhiSlotFreeFbuf | read-only | current | The number of Fbufs available. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.14 | ColumnrcKhiSlotNoFbuf | read-only | current | The number of times when running out of Fbuff |
| 1.3.6.1.4.1.2272.1.85.10.1.1.15 | ColumnrcKhiSlotNetStackSysFreeMbuf | read-only | current | The number of network stack system Mbufs available. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.16 | ColumnrcKhiSlotNetStackDataFreeMbuf | read-only | current | The number of network stack data Mbufs available. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.17 | ColumnrcKhiSlotNetStackSysUsedMbuf | read-only | current | The number of network stack system Mbufs in use. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.18 | ColumnrcKhiSlotNetStackDataUsedMbuf | read-only | current | The number of network stack data Mbufs in use. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.19 | ColumnrcKhiSlotNetStackSysSocketMbuf | read-only | current | The number of network stack system sockets. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.20 | ColumnrcKhiSlotQHigh | read-only | current | The highest number of queue entries consumed for system messaging. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.21 | ColumnrcKhiSlotQNormal | read-only | current | The current number of queue entries consumed for system messaging. |
| 1.3.6.1.4.1.2272.1.85.10.1.1.22 | ColumnrcKhiSlotFreeQEntries | read-only | current | The current available number of queue entries for system messaging. |
| 1.3.6.1.4.1.2272.1.85.10.2 | TablercKhiSlotProcessTable | not-accessible | current | CP Process Information |
| 1.3.6.1.4.1.2272.1.85.10.2.1 | RowrcKhiSlotProcessEntry | not-accessible | current | Slot Process Entry |
| 1.3.6.1.4.1.2272.1.85.10.2.1.1 | ColumnrcKhiSlotProcessId | not-accessible | current | Process ID |
| 1.3.6.1.4.1.2272.1.85.10.2.1.2 | ColumnrcKhiSlotProcessParentId | read-only | current | Parent Process ID |
| 1.3.6.1.4.1.2272.1.85.10.2.1.3 | ColumnrcKhiSlotProcessName | read-only | current | Name of the process running |
| 1.3.6.1.4.1.2272.1.85.10.2.1.4 | ColumnrcKhiSlotProcessVmSize | read-only | current | The size of the virtual memory allocated to the process |
| 1.3.6.1.4.1.2272.1.85.10.2.1.5 | ColumnrcKhiSlotProcessVmLck | read-only | current | The amount of locked memory |
| 1.3.6.1.4.1.2272.1.85.10.2.1.6 | ColumnrcKhiSlotProcessVmRss | read-only | current | The amount of memory mapped in RAM ( instead of swapped out) |
| 1.3.6.1.4.1.2272.1.85.10.2.1.7 | ColumnrcKhiSlotProcessVmData | read-only | current | The size of the Data segment |
| 1.3.6.1.4.1.2272.1.85.10.2.1.8 | ColumnrcKhiSlotProcessVmStk | read-only | current | The stack size |
| 1.3.6.1.4.1.2272.1.85.10.2.1.9 | ColumnrcKhiSlotProcessVmExe | read-only | current | The size of the executable segment |
| 1.3.6.1.4.1.2272.1.85.10.2.1.10 | ColumnrcKhiSlotProcessVmLib | read-only | current | The size of the library code |
| 1.3.6.1.4.1.2272.1.85.10.3 | TablercKhiSlotPThreadTable | not-accessible | current | Slot pthread information |
| 1.3.6.1.4.1.2272.1.85.10.3.1 | RowrcKhiSlotPThreadEntry | not-accessible | current | Slot pthread entry |
| 1.3.6.1.4.1.2272.1.85.10.3.1.1 | ColumnrcKhiSlotPThreadTaskId | not-accessible | current | Task ID |
| 1.3.6.1.4.1.2272.1.85.10.3.1.2 | ColumnrcKhiSlotPThreadName | read-only | current | Name of the process running |
| 1.3.6.1.4.1.2272.1.85.10.3.1.3 | ColumnrcKhiSlotPThreadCpuCurrentUtil | read-only | current | Percentage CPU utilization under current operating conditions. Value is in tenth's of a percent. |
| 1.3.6.1.4.1.2272.1.85.10.3.1.4 | ColumnrcKhiSlotPThreadCpu5MinAve | read-only | current | Average percentage CPU utilization over the past 5 minutes. Value is in tenth's of a percent. |
| 1.3.6.1.4.1.2272.1.85.10.3.1.5 | ColumnrcKhiSlotPThreadCpu5MinHi | read-only | current | Hi watermark for percentage CPU utilization over the past 5 minutes. Value is in tenth's of a percent. |
| 1.3.6.1.4.1.2272.1.85.10.3.1.6 | ColumnrcKhiSlotPthread5MinHiTime | read-only | current | Last time at which sampling occured. |
| 1.3.6.1.4.1.2272.1.85.11 | NodercKhiForwardingCb | |||
| 1.3.6.1.4.1.2272.1.85.11.1 | TablercKhiForwardingCbIfTable | not-accessible | current | Forwarding Interface Key Health Indicator MIB - All Cobalt Blue Data. |
| 1.3.6.1.4.1.2272.1.85.11.1.1 | RowrcKhiForwardingCbIfEntry | not-accessible | current | Forwarding Interface KHI - Cobalt Blue table entry. |
| 1.3.6.1.4.1.2272.1.85.11.1.1.1 | ColumnrcKhiForwardingCbIfIndex | not-accessible | current | Interface index for CB's KHI Forwarding data. Indicies are essentially port based. |
| 1.3.6.1.4.1.2272.1.85.11.1.1.2 | ColumnrcKhiForwardingCbIfRxOk | read-only | current | Receieve OK Packets |
| 1.3.6.1.4.1.2272.1.85.11.1.1.3 | ColumnrcKhiForwardingCbIfTxOk | read-only | current | Transmit OK Packets |
| 1.3.6.1.4.1.2272.1.85.11.1.1.4 | ColumnrcKhiForwardingCbIfRxErr | read-only | current | Receive Error Packets |
| 1.3.6.1.4.1.2272.1.85.11.1.1.5 | ColumnrcKhiForwardingCbIfTxErr | read-only | current | Transmit Error Packets |
| 1.3.6.1.4.1.2272.1.85.11.1.1.6 | ColumnrcKhiForwardingCbIfRdbgc0 | read-only | current | RDBGC0 Packets |
| 1.3.6.1.4.1.2272.1.85.11.1.1.7 | ColumnrcKhiForwardingCbIfRdbgc0Mask | read-only | current | RDBGC0 Mask |
| 1.3.6.1.4.1.2272.1.85.11.1.1.8 | ColumnrcKhiForwardingCbIfTdbgc0 | read-only | current | TDBGC0 Packets |
| 1.3.6.1.4.1.2272.1.85.11.1.1.9 | ColumnrcKhiForwardingCbIfTdbgc0Mask | read-only | current | TDBGC0 Mask |
| 1.3.6.1.4.1.2272.1.85.11.1.1.10 | ColumnrcKhiForwardingCbIfK2IpmcDrops | read-only | current | IP Multicast Drops |
| 1.3.6.1.4.1.2272.1.85.11.2 | TablercKhiForwardingCbMachigigTable | not-accessible | current | Forwarding Mac-Higig Key Health Indicator MIB - All Cobalt Blue Data. |
| 1.3.6.1.4.1.2272.1.85.11.2.1 | RowrcKhiForwardingCbMachigigEntry | not-accessible | current | Forwarding Mac-Higig KHI - Cobalt Blue table entry. |
| 1.3.6.1.4.1.2272.1.85.11.2.1.1 | ColumnrcKhiForwardingCbMachigigIndex | not-accessible | current | Index for CB's Forwarding MAc-Higig Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested … |
| 1.3.6.1.4.1.2272.1.85.11.2.1.2 | ColumnrcKhiForwardingCbMachigigMacK2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.2.1.3 | ColumnrcKhiForwardingCbMachigigMacK2Mac | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.2.1.4 | ColumnrcKhiForwardingCbMachigigRDGBC0 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.2.1.5 | ColumnrcKhiForwardingCbMachigigRDGBC0mask | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.2.1.6 | ColumnrcKhiForwardingCbMachigigTDGBC0 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.2.1.7 | ColumnrcKhiForwardingCbMachigigTDGBC0mask | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.2.1.8 | ColumnrcKhiForwardingCbMachigigIFPDOSDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3 | TablercKhiForwardingCbK2Table | not-accessible | current | Forwarding K2 Key Health Indicator MIB - All Cobalt Blue Data. |
| 1.3.6.1.4.1.2272.1.85.11.3.1 | RowrcKhiForwardingCbK2Entry | not-accessible | current | Forwarding K2 KHI - Cobalt Blue table entry. |
| 1.3.6.1.4.1.2272.1.85.11.3.1.1 | ColumnrcKhiForwardingCbK2Index | not-accessible | current | Index for CB's Forwarding K2 Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all… |
| 1.3.6.1.4.1.2272.1.85.11.3.1.2 | ColumnrcKhiForwardingCbK2MacK2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.3 | ColumnrcKhiForwardingCbK2Zagros | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.4 | ColumnrcKhiForwardingCbK2ZagrosK2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.5 | ColumnrcKhiForwardingCbK2Mac | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.6 | ColumnrcKhiForwardingCbK2MacK2Err | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.7 | ColumnrcKhiForwardingCbK2ZagrosErr | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.8 | ColumnrcKhiForwardingCbK2ZagrosK2Err | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.3.1.9 | ColumnrcKhiForwardingCbK2MacErr | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4 | TablercKhiForwardingCbZagrosTable | not-accessible | current | Zagros Forwarding Zagros Key Health Indicator MIB - All Cobalt Blue Data. |
| 1.3.6.1.4.1.2272.1.85.11.4.1 | RowrcKhiForwardingCbZagrosEntry | not-accessible | current | Zagros Forwarding KHI - Cobalt Blue table entry. |
| 1.3.6.1.4.1.2272.1.85.11.4.1.1 | ColumnrcKhiForwardingCbZagrosIndex | not-accessible | current | Index for CB's Forwarding Zagros Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not… |
| 1.3.6.1.4.1.2272.1.85.11.4.1.2 | ColumnrcKhiForwardingCbZagrosK2Zagros | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.3 | ColumnrcKhiForwardingCbZagrosRsp | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.4 | ColumnrcKhiForwardingCbZagrosQe | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.5 | ColumnrcKhiForwardingCbZagrosQeZagros | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.6 | ColumnrcKhiForwardingCbZagrosK2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.7 | ColumnrcKhiForwardingCbZagrosPmmPoolLo | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.8 | ColumnrcKhiForwardingCbZagrosPmmPoolHigh | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.9 | ColumnrcKhiForwardingCbZagrosPmmRspDropCounters | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.10 | ColumnrcKhiForwardingCbZagrosPmmoutputDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.11 | ColumnrcKhiForwardingCbZagrosPmmAdmissionRspDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.12 | ColumnrcKhiForwardingCbZagrosPmmAdmissionErrDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.13 | ColumnrcKhiForwardingCbZagrosPmmPool1Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.14 | ColumnrcKhiForwardingCbZagrosPmmPool2Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.15 | ColumnrcKhiForwardingCbZagrosPmmPool3Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.16 | ColumnrcKhiForwardingCbZagrosPmmPool4Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.17 | ColumnrcKhiForwardingCbZagrosPmmPool5Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.18 | ColumnrcKhiForwardingCbZagrosPmmPool6Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.19 | ColumnrcKhiForwardingCbZagrosPmmPool7Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.20 | ColumnrcKhiForwardingCbZagrosPmmPool8Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.21 | ColumnrcKhiForwardingCbZagrosPmmPool9Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.22 | ColumnrcKhiForwardingCbZagrosPmmPool10Drop | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.23 | ColumnrcKhiForwardingCbZagrosHbeCommandDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.24 | ColumnrcKhiForwardingCbZagrosTcamSearchError | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.25 | ColumnrcKhiForwardingCbZagrosEhpAllPortDownIstCounter | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.26 | ColumnrcKhiForwardingCbZagrosEhpAllPortDownMltCounter | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.27 | ColumnrcKhiForwardingCbZagrosEhpErrorDropCounter | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.28 | ColumnrcKhiForwardingCbZagrosIgrFilterDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.29 | ColumnrcKhiForwardingCbZagrosZapTxCtl | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.30 | ColumnrcKhiForwardingCbZagrosZapTxDat | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.31 | ColumnrcKhiForwardingCbZagrosZapRxCtl | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.32 | ColumnrcKhiForwardingCbZagrosZapRxDat | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.33 | ColumnrcKhiForwardingCbZagrosZapTxHbe | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.34 | ColumnrcKhiForwardingCbZagrosTcamSearchVal | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.35 | ColumnrcKhiForwardingCbZagrosEmbDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.36 | ColumnrcKhiForwardingCbZagrosEhpFilterDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.37 | ColumnrcKhiForwardingCbZagrosEgrIpmcDropCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.38 | ColumnrcKhiForwardingCbZagrosEgressEsb1Count | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.39 | ColumnrcKhiForwardingCbZagrosEgressEsb2Count | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.40 | ColumnrcKhiForwardingCbZagrosEgressEsb3Count | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.41 | ColumnrcKhiForwardingCbZagrosEgressEsb4Count | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.42 | ColumnrcKhiForwardingCbZagrosEgressEsb5Count | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.43 | ColumnrcKhiForwardingCbZagrosEgressEsb6Count | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.44 | ColumnrcKhiForwardingCbZagrosRspRx | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.45 | ColumnrcKhiForwardingCbZagrosOpTx | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.46 | ColumnrcKhiForwardingCbZagrosRspTx | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.47 | ColumnrcKhiForwardingCbZagrosCifRqCount | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.48 | ColumnrcKhiForwardingCbZagrosCifRsCounter | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.49 | ColumnrcKhiForwardingCbZagrosPage1Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.50 | ColumnrcKhiForwardingCbZagrosPage2Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.51 | ColumnrcKhiForwardingCbZagrosPage3Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.52 | ColumnrcKhiForwardingCbZagrosPage4Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.53 | ColumnrcKhiForwardingCbZagrosPage5Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.54 | ColumnrcKhiForwardingCbZagrosPage6Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.55 | ColumnrcKhiForwardingCbZagrosPage7Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.56 | ColumnrcKhiForwardingCbZagrosPage8Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.57 | ColumnrcKhiForwardingCbZagrosPage9Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.58 | ColumnrcKhiForwardingCbZagrosPage10Count | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.59 | ColumnrcKhiForwardingCbZagrosShPp | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.60 | ColumnrcKhiForwardingCbZagrosFpCounts | read-only | obsolete | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.61 | ColumnrcKhiForwardingCbZagrosRspPlcThresholdReg | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.62 | ColumnrcKhiForwardingCbZagrosRePlc | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.63 | ColumnrcKhiForwardingCbZagrosNumPools | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.4.1.64 | ColumnrcKhiForwardingCbZagrosFpCntOPA | read-only | current | Free page counter for OPA(Output Packet Assembler) |
| 1.3.6.1.4.1.2272.1.85.11.4.1.65 | ColumnrcKhiForwardingCbZagrosFpCntRPA | read-only | current | Free page counter for RPA(RSP Packet Assembler) |
| 1.3.6.1.4.1.2272.1.85.11.4.1.66 | ColumnrcKhiForwardingCbZagrosFpCntFPM | read-only | current | Free page counter for FPM(Free Page Manager) |
| 1.3.6.1.4.1.2272.1.85.11.4.1.67 | ColumnrcKhiForwardingCbZagrosRspPlcPktCntPeak | read-only | current | RSP PLC Peak Packet Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.68 | ColumnrcKhiForwardingCbZagrosRspPlcPktCntCurr | read-only | current | RSP PLC Current Packet Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.69 | ColumnrcKhiForwardingCbZagrosRePlcPktCntPeak | read-only | current | RE PLC(Replica Engine Packet Limit Count)Peak Packet Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.70 | ColumnrcKhiForwardingCbZagrosRePlcPktCntCurr | read-only | current | RE PLC Current Packet Count |
| 1.3.6.1.4.1.2272.1.85.11.4.1.71 | ColumnrcKhiForwardingCbZagrosShPpPeak | read-only | current | PMM shared pool Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.72 | ColumnrcKhiForwardingCbZagrosShPpCurr | read-only | current | PMM shared pool Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.73 | ColumnrcKhiForwardingCbZagrosEgressMultiCastPeak | read-only | current | PMM EgressMultiCast Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.74 | ColumnrcKhiForwardingCbZagrosEgressMultiCastCurr | read-only | current | PMM EgressMultiCast Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.75 | ColumnrcKhiForwardingCbZagrosEgressOOBPeak | read-only | current | PMM EgressOOB(Out Of Band) Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.76 | ColumnrcKhiForwardingCbZagrosEgressOOBCurr | read-only | current | PMM EgressOOB Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.77 | ColumnrcKhiForwardingCbZagrosIngressHeartbeatPeak | read-only | current | PMM IngressHeartbeat Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.78 | ColumnrcKhiForwardingCbZagrosIngressHeartbeatCurr | read-only | current | PMM IngressHeartbeat Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.79 | ColumnrcKhiForwardingCbZagrosIngressCOPInsertPeak | read-only | current | PMM IngressCOPInsert Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.80 | ColumnrcKhiForwardingCbZagrosIngressCOPInsertCurr | read-only | current | PMM IngressCOPInsert Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.81 | ColumnrcKhiForwardingCbZagrosIngressEfCtlPeak | read-only | current | PMM Ingress EF/CTL(Expedited Forward/Control)Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.82 | ColumnrcKhiForwardingCbZagrosIngressEfCtlCurr | read-only | current | PMM Ingress EF/CTL Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.83 | ColumnrcKhiForwardingCbZagrosIngressAfBePeak | read-only | current | PMM Ingress AF/BE(Assured Forwarding/Best Effort)Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.84 | ColumnrcKhiForwardingCbZagrosIngressAfBeCurr | read-only | current | PMM Ingress AF/BE Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.85 | ColumnrcKhiForwardingCbZagrosEgressL2BcUcPeak | read-only | current | PMM Egress L2BC/UC(Layer 2 Broadcast/Unicast)Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.86 | ColumnrcKhiForwardingCbZagrosEgressL2BcUcCurr | read-only | current | PMM Egress L2BC/UC Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.87 | ColumnrcKhiForwardingCbZagrosEgressMirrorPeak | read-only | current | PMM Egress Mirror Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.88 | ColumnrcKhiForwardingCbZagrosEgressMirrorCurr | read-only | current | PMM Egress Mirror Current Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.89 | ColumnForwardingCbZagrosPool9Peak | read-only | current | PMM Pool9 Peak Value |
| 1.3.6.1.4.1.2272.1.85.11.4.1.90 | ColumnrcKhiForwardingCbZagrosPool9Curr | read-only | current | PMM Pool9 Current Value |
| 1.3.6.1.4.1.2272.1.85.11.5 | TablercKhiForwardingCbRspTable | not-accessible | current | Forwarding Rsp Key Health Indicator MIB - All Cobalt Blue Data. |
| 1.3.6.1.4.1.2272.1.85.11.5.1 | RowrcKhiForwardingCbRspEntry | not-accessible | current | Forwarding Rsp KHI - Cobalt Blue table entry. |
| 1.3.6.1.4.1.2272.1.85.11.5.1.1 | ColumnrcKhiForwardingCbRspIndex | not-accessible | current | Index for CB's Forwarding Rsp Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not al… |
| 1.3.6.1.4.1.2272.1.85.11.5.1.2 | ColumnrcKhiForwardingCbRspLsmDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.3 | ColumnrcKhiForwardingCbRspExceptionDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.4 | ColumnrcKhiForwardingCbRspFrameErrorDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.5 | ColumnrcKhiForwardingCbRspFdibFullDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.6 | ColumnrcKhiForwardingCbRspIngrMltAllPortDown | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.7 | ColumnrcKhiForwardingCbRspEgressMltAllPortDownDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.8 | ColumnrcKhiForwardingCbRspEgressIpMcastRecordsNotFound | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.9 | ColumnrcKhiForwardingCbRspEgressIpMcastMltWrongPort | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.10 | ColumnrcKhiForwardingCbRspEgressIpMcastSourceKnockout | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.11 | ColumnrcKhiForwardingCbRspIngressDaNotFoundDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.12 | ColumnrcKhiForwardingCbRspIngressUnknown | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.13 | ColumnrcKhiForwardingCbRspIngressDiscardDestIdDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.14 | ColumnrcKhiForwardingCbRspMacLearningPacketDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.15 | ColumnrcKhiForwardingCbRspIngrMltAllPortsDown | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.16 | ColumnrcKhiForwardingCbRspIngressIpmcSupressionDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.17 | ColumnrcKhiForwardingCbRspUnsupportedFeatureDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.18 | ColumnrcKhiForwardingCbRspAclDiscards | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.19 | ColumnrcKhiForwardingCbRspIngressIpmcLookupFails | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.20 | ColumnrcKhiForwardingCbRspIpv4DestIpLookupFails | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.21 | ColumnrcKhiForwardingCbRspIpv4SourceIpLookupFails | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.22 | ColumnrcKhiForwardingCbRspL3MirrorDrops | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.23 | ColumnrcKhiForwardingCbRspIpV6LookupFails | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.5.1.24 | ColumnrcKhiForwardingCbRspIpV6TunnelLookupV4Fails | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6 | TablercKhiForwardingCbQeTable | not-accessible | current | Forwarding Qe Key Health Indicator MIB - All Cobalt Blue Data. |
| 1.3.6.1.4.1.2272.1.85.11.6.1 | RowrcKhiForwardingCbQeEntry | not-accessible | current | Forwarding Qe KHI - Cobalt Blue table entry. |
| 1.3.6.1.4.1.2272.1.85.11.6.1.1 | ColumnrcKhiForwardingCbQeIndex | not-accessible | current | Index for CB's Forwarding Qe Health data. There are 6 indicies reserved on a per slot basis. Depending on the card present and the data being requested not all… |
| 1.3.6.1.4.1.2272.1.85.11.6.1.2 | ColumnrcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt0 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.3 | ColumnrcKhiForwardingCbQeIngressQmAgrMarkedPktCnt0 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.4 | ColumnrcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt1 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.5 | ColumnrcKhiForwardingCbQeIngressQmAgrMarkedPktCnt1 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.6 | ColumnrcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.7 | ColumnrcKhiForwardingCbQeIngressQmAgrMarkedPktCnt2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.8 | ColumnrcKhiForwardingCbQeIngressQmAgrAcceptedPktCnt3 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.9 | ColumnrcKhiForwardingCbQeIngressQmAgrDequeuedPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.10 | ColumnrcKhiForwardingCbQeIngressPmSwitchPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.11 | ColumnrcKhiForwardingCbQeIngressPmLocalPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.12 | ColumnrcKhiForwardingCbQeIngressPmSwitchTestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.13 | ColumnrcKhiForwardingCbQeIngressPmLocalTestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.14 | ColumnrcKhiForwardingCbQeIngressSr0RxP0PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.15 | ColumnrcKhiForwardingCbQeIngressSr1RxP0PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.16 | ColumnrcKhiForwardingCbQeIngressSr0RxP1PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.17 | ColumnrcKhiForwardingCbQeIngressSr1RxP1PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.18 | ColumnrcKhiForwardingCbQeIngressSr0RxP2PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.19 | ColumnrcKhiForwardingCbQeIngressSr1RxP2PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.20 | ColumnrcKhiForwardingCbQeIngressSr0RxP3PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.21 | ColumnrcKhiForwardingCbQeIngressSr1RxP3PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.22 | ColumnrcKhiForwardingCbQeIngressSr0RxP4PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.23 | ColumnrcKhiForwardingCbQeIngressSr1RxP4PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.24 | ColumnrcKhiForwardingCbQeIngressSr0RxP5PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.25 | ColumnrcKhiForwardingCbQeIngressSr1RxP5PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.26 | ColumnrcKhiForwardingCbQeIngressSr0RxP6PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.27 | ColumnrcKhiForwardingCbQeIngressSr1RxP6PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.28 | ColumnrcKhiForwardingCbQeIngressSr0RxP7PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.29 | ColumnrcKhiForwardingCbQeIngressSr1RxP7PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.30 | ColumnrcKhiForwardingCbQeIngressSr0RxP8PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.31 | ColumnrcKhiForwardingCbQeIngressSr1RxP8PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.32 | ColumnrcKhiForwardingCbQeIngressSr0RxP9PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.33 | ColumnrcKhiForwardingCbQeIngressSr1RxP9PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.34 | ColumnrcKhiForwardingCbQeIngressSr0RxP10PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.35 | ColumnrcKhiForwardingCbQeIngressSr1RxP10PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.36 | ColumnrcKhiForwardingCbQeIngressSr0RxP11PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.37 | ColumnrcKhiForwardingCbQeIngressSr1RxP11PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.38 | ColumnrcKhiForwardingCbQeIngressSr0RxP12PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.39 | ColumnrcKhiForwardingCbQeIngressSr1RxP12PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.40 | ColumnrcKhiForwardingCbQeIngressSr0RxP13PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.41 | ColumnrcKhiForwardingCbQeIngressSr1RxP13PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.42 | ColumnrcKhiForwardingCbQeIngressSr0RxP14PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.43 | ColumnrcKhiForwardingCbQeIngressSr1RxP14PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.44 | ColumnrcKhiForwardingCbQeIngressSr0RxP15PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.45 | ColumnrcKhiForwardingCbQeIngressSr1RxP15PktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.46 | ColumnrcKhiForwardingCbQeIngressSr0RxTestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.47 | ColumnrcKhiForwardingCbQeIngressSr1RxTestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.48 | ColumnrcKhiForwardingCbQeIngressRbIdp0RequestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.49 | ColumnrcKhiForwardingCbQeIngressRbIdp1RequestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.50 | ColumnrcKhiForwardingCbQeIngressRbIdp2RequestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.51 | ColumnrcKhiForwardingCbQeIngressRbIdp3RequestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.52 | ColumnrcKhiForwardingCbQeIngressRbIdp4RequestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.53 | ColumnrcKhiForwardingCbQeIngressRbEnqrespPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.54 | ColumnrcKhiForwardingCbQeEgressSvPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.55 | ColumnrcKhiForwardingCbQeEgressSt0P0TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.56 | ColumnrcKhiForwardingCbQeEgressSt1P0TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.57 | ColumnrcKhiForwardingCbQeEgressSt0P1TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.58 | ColumnrcKhiForwardingCbQeEgressSt1P1TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.59 | ColumnrcKhiForwardingCbQeEgressSt0P2TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.60 | ColumnrcKhiForwardingCbQeEgressSt1P2TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.61 | ColumnrcKhiForwardingCbQeEgressSt0P3TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.62 | ColumnrcKhiForwardingCbQeEgressSt1P3TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.63 | ColumnrcKhiForwardingCbQeEgressSt0P4TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.64 | ColumnrcKhiForwardingCbQeEgressSt1P4TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.65 | ColumnrcKhiForwardingCbQeEgressSt0P5TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.66 | ColumnrcKhiForwardingCbQeEgressSt1P5TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.67 | ColumnrcKhiForwardingCbQeEgressSt0P6TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.68 | ColumnrcKhiForwardingCbQeEgressSt1P6TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.69 | ColumnrcKhiForwardingCbQeEgressSt0P7TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.70 | ColumnrcKhiForwardingCbQeEgressSt1P7TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.71 | ColumnrcKhiForwardingCbQeEgressSt0P8TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.72 | ColumnrcKhiForwardingCbQeEgressSt1P8TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.73 | ColumnrcKhiForwardingCbQeEgressSt0P9TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.74 | ColumnrcKhiForwardingCbQeEgressSt1P9TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.75 | ColumnrcKhiForwardingCbQeEgressSt0P10TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.76 | ColumnrcKhiForwardingCbQeEgressSt1P10TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.77 | ColumnrcKhiForwardingCbQeEgressSt0P11TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.78 | ColumnrcKhiForwardingCbQeEgressSt1P11TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.79 | ColumnrcKhiForwardingCbQeEgressSt0P12TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.80 | ColumnrcKhiForwardingCbQeEgressSt1P12TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.81 | ColumnrcKhiForwardingCbQeEgressSt0P13TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.82 | ColumnrcKhiForwardingCbQeEgressSt1P13TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.83 | ColumnrcKhiForwardingCbQeEgressSt0P14TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.84 | ColumnrcKhiForwardingCbQeEgressSt1P14TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.85 | ColumnrcKhiForwardingCbQeEgressSt0P15TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.86 | ColumnrcKhiForwardingCbQeEgressSt1P15TxPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.87 | ColumnrcKhiForwardingCbQeEgressSt0TxTestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.88 | ColumnrcKhiForwardingCbQeEgressSt1TxTestPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.89 | ColumnrcKhiForwardingCbQeSvPartialPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.90 | ColumnrcKhiForwardingCbQeQmAgrWredDroppedPktCnt0 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.91 | ColumnrcKhiForwardingCbQeQmAgrWredDroppedPktCnt1 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.92 | ColumnrcKhiForwardingCbQeQmAgrWredDroppedPktCnt2 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.93 | ColumnrcKhiForwardingCbQeQmAgrPolicedDroppedPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.94 | ColumnrcKhiForwardingCbQeQmAgrNonWredDroppedPktCnt | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.6.1.95 | ColumnrcKhiForwardingCbQeQmError1 | read-only | current | |
| 1.3.6.1.4.1.2272.1.85.11.7 | TablercKhiForwardingIfpTable | not-accessible | deprecated | Forwarding Ifp Key Health Indicator MIB - All VSP Data. |
| 1.3.6.1.4.1.2272.1.85.11.7.1 | RowrcKhiForwardingIfpEntry | not-accessible | deprecated | Forwarding Ifp KHI - VSP table entry. |
| 1.3.6.1.4.1.2272.1.85.11.7.1.1 | ColumnrcKhiForwardingIfpSlot | not-accessible | deprecated | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.7.1.2 | ColumnrcKhiForwardingIfpIndex | not-accessible | deprecated | Index of the IFP Rule |
| 1.3.6.1.4.1.2272.1.85.11.7.1.3 | ColumnrcKhiForwardingIfpName | read-only | deprecated | Name of the IFP Rule |
| 1.3.6.1.4.1.2272.1.85.11.7.1.4 | ColumnrcKhiForwardingIfpSlice0Ports | read-only | deprecated | Range of Ports in slice0 of the slot. Display format will have Ports 1-24 or 1-8 based on the card type |
| 1.3.6.1.4.1.2272.1.85.11.7.1.5 | ColumnrcKhiForwardingIfpSlice0Cnt | read-only | deprecated | Counter for slice 0 |
| 1.3.6.1.4.1.2272.1.85.11.7.1.6 | ColumnrcKhiForwardingIfpSlice1Ports | read-only | deprecated | Range of Ports in slice1 of the slot. Display format will have Ports 25-48 or 9-16 based on the card type |
| 1.3.6.1.4.1.2272.1.85.11.7.1.7 | ColumnrcKhiForwardingIfpSlice1Cnt | read-only | deprecated | Counter for slice 1 |
| 1.3.6.1.4.1.2272.1.85.11.7.1.8 | ColumnrcKhiForwardingIfpSlice2Ports | read-only | deprecated | Range of Ports in slice2 of the slot. Display format will have Ports 0 or 17-24 based on the card type |
| 1.3.6.1.4.1.2272.1.85.11.7.1.9 | ColumnrcKhiForwardingIfpSlice2Cnt | read-only | deprecated | Counter for slice 2 |
| 1.3.6.1.4.1.2272.1.85.11.8 | TablercKhiForwardingIfpNewTable | not-accessible | current | Forwarding Ifp New Key Health Indicator MIB. This table replaces the old table rcKhiForwardingIfpTable |
| 1.3.6.1.4.1.2272.1.85.11.8.1 | RowrcKhiForwardingIfpNewEntry | not-accessible | current | Forwarding Ifp KHI - VSP table entry. |
| 1.3.6.1.4.1.2272.1.85.11.8.1.1 | ColumnrcKhiForwardingIfpNewSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.11.8.1.2 | ColumnrcKhiForwardingIfpNewTblType | not-accessible | current | Type of table IFP PCV for both 1G and 10G cards. IFP PCV MAC-in-MAC Tagged and Untagged are for 10G card |
| 1.3.6.1.4.1.2272.1.85.11.8.1.3 | ColumnrcKhiForwardingIfpNewIndex | not-accessible | current | Index of the IFP Rule |
| 1.3.6.1.4.1.2272.1.85.11.8.1.4 | ColumnrcKhiForwardingIfpNewName | read-only | current | Name of the IFP Rule |
| 1.3.6.1.4.1.2272.1.85.11.8.1.5 | ColumnrcKhiForwardingIfpNewSlice0Ports | read-only | current | Range of Ports in slice0 of the slot. Display format will have Ports 1-24 or 1-8 based on the card type |
| 1.3.6.1.4.1.2272.1.85.11.8.1.6 | ColumnrcKhiForwardingIfpNewSlice0Cnt | read-only | current | Counter for slice 0 |
| 1.3.6.1.4.1.2272.1.85.11.8.1.7 | ColumnrcKhiForwardingIfpNewSlice1Ports | read-only | current | Range of Ports in slice1 of the slot. Display format will have Ports 25-48 or 9-16 based on the card type |
| 1.3.6.1.4.1.2272.1.85.11.8.1.8 | ColumnrcKhiForwardingIfpNewSlice1Cnt | read-only | current | Counter for slice 1 |
| 1.3.6.1.4.1.2272.1.85.11.8.1.9 | ColumnrcKhiForwardingIfpNewSlice2Ports | read-only | current | Range of Ports in slice2 of the slot. Display format will have Ports 0 or 17-24 based on the card type |
| 1.3.6.1.4.1.2272.1.85.11.8.1.10 | ColumnrcKhiForwardingIfpNewSlice2Cnt | read-only | current | Counter for slice 2 |
| 1.3.6.1.4.1.2272.1.85.12 | NodercKhiCpp | |||
| 1.3.6.1.4.1.2272.1.85.12.1 | ScalarrcKhiCppPortStatsClear | read-write | current | Clear Khi Cpp Port Statistics MIB - All VSP Data. |
| 1.3.6.1.4.1.2272.1.85.12.2 | ScalarrcKhiCppIoCopStatsClear | read-write | current | Clear Khi Cpp Slot Statistics MIB - All VSP Data. |
| 1.3.6.1.4.1.2272.1.85.12.3 | TablercKhiCppPortStatsTable | not-accessible | current | Khi Cpp Port Statistics MIB - All VSP Data. |
| 1.3.6.1.4.1.2272.1.85.12.3.1 | RowrcKhiCppPortStatsEntry | not-accessible | current | Khi Cpp Port Statistics - VSP table entry. |
| 1.3.6.1.4.1.2272.1.85.12.3.1.1 | ColumnrcKhiCppPortStatsPort | not-accessible | current | Port Number-this entry contains information about packet type, count of Rx and Tx packet |
| 1.3.6.1.4.1.2272.1.85.12.3.1.2 | ColumnrcKhiCppPortStatsPacket | not-accessible | current | Packet Type |
| 1.3.6.1.4.1.2272.1.85.12.3.1.3 | ColumnrcKhiCppPortStatsPacketName | read-only | current | Name of the Packet |
| 1.3.6.1.4.1.2272.1.85.12.3.1.4 | ColumnrcKhiCppPortStatsRxPackets | read-only | current | Rx count for a particular Packet Type |
| 1.3.6.1.4.1.2272.1.85.12.3.1.5 | ColumnrcKhiCppPortStatsTxPackets | read-only | current | Tx count for a particular Packet Type |
| 1.3.6.1.4.1.2272.1.85.12.4 | TablercKhiCppIoCopStatsTable | not-accessible | current | Khi Cpp IoCop Statistics MIB - All VSP Data. |
| 1.3.6.1.4.1.2272.1.85.12.4.1 | RowrcKhiCppIoCopStatsEntry | not-accessible | current | Khi Cpp IoCop Statistics - VSP table entry. |
| 1.3.6.1.4.1.2272.1.85.12.4.1.1 | ColumnrcKhiCppIoCopStatsSlot | not-accessible | current | Slot Number |
| 1.3.6.1.4.1.2272.1.85.12.4.1.2 | ColumnrcKhiCppIoCopStatsMacMgmtRxPackets | read-only | current | MacMgmt Rx Packets |
| 1.3.6.1.4.1.2272.1.85.12.4.1.3 | ColumnrcKhiCppIoCopStatsIpFixRxPackets | read-only | current | IpFix Rx Packets |
| 1.3.6.1.4.1.2272.1.85.12.5 | NodercKhiCppProtocolDrops | |||
| 1.3.6.1.4.1.2272.1.85.12.5.1 | ScalarrcKhiCppProtocolDropsClear | read-write | current | Clear all protocol drop counters |
| 1.3.6.1.4.1.2272.1.85.12.5.2 | ScalarrcKhiCppProtocolDropsDataExpCnt | read-only | current | Data Exp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.3 | ScalarrcKhiCppProtocolDropsTtlExpCnt | read-only | current | Ttl Exp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.4 | ScalarrcKhiCppProtocolDropsIpmcDataCnt | read-only | current | Ipmc Data Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.5 | ScalarrcKhiCppProtocolDropsMacLearningCnt | read-only | current | Mac learning Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.6 | ScalarrcKhiCppProtocolDropsIsIsCnt | read-only | current | IsIs Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.7 | ScalarrcKhiCppProtocolDropsBgpCnt | read-only | current | Bgp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.8 | ScalarrcKhiCppProtocolDropsRipV1Cnt | read-only | current | RipV1 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.9 | ScalarrcKhiCppProtocolDropsRipV2Cnt | read-only | current | RipV2 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.10 | ScalarrcKhiCppProtocolDropsOspfMcCnt | read-only | current | Ospf Mc Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.11 | ScalarrcKhiCppProtocolDropsFtpCnt | read-only | current | Ftp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.12 | ScalarrcKhiCppProtocolDropsTftpCnt | read-only | current | Tftp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.13 | ScalarrcKhiCppProtocolDropsSnmpCnt | read-only | current | Snmp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.14 | ScalarrcKhiCppProtocolDropsTelnetCnt | read-only | current | Telnet Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.15 | ScalarrcKhiCppProtocolDropsSshCnt | read-only | current | Ssh Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.16 | ScalarrcKhiCppProtocolDropsRshCnt | read-only | current | Rsh Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.17 | ScalarrcKhiCppProtocolDropsIstCtlCnt | read-only | current | IstCtl Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.18 | ScalarrcKhiCppProtocolDropsRadiusCnt | read-only | current | Radius Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.19 | ScalarrcKhiCppProtocolDropsNtpCnt | read-only | current | Ntp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.20 | ScalarrcKhiCppProtocolDropsDhcpCnt | read-only | current | Dhcp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.21 | ScalarrcKhiCppProtocolDropsIcmpV4Cnt | read-only | current | IcmpV4 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.22 | ScalarrcKhiCppProtocolDropsIcmpV6Cnt | read-only | current | IcmpV6 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.23 | ScalarrcKhiCppProtocolDropsIgmpCnt | read-only | current | Igmp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.24 | ScalarrcKhiCppProtocolDropsPimMcCnt | read-only | current | Pim Mc Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.25 | ScalarrcKhiCppProtocolDropsVrrpCnt | read-only | current | Vrrp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.26 | ScalarrcKhiCppProtocolDropsArpReqCnt | read-only | current | Arp Req Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.27 | ScalarrcKhiCppProtocolDropsArpOtherCnt | read-only | current | Arp Other Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.28 | ScalarrcKhiCppProtocolDropsRarpReqCnt | read-only | current | Rarp Req Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.29 | ScalarrcKhiCppProtocolDropsRarpOtherCnt | read-only | current | Rarp Other Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.30 | ScalarrcKhiCppProtocolDropsSlppCnt | read-only | current | Slpp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.31 | ScalarrcKhiCppProtocolDropsBpduCnt | read-only | current | Bpdu Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.32 | ScalarrcKhiCppProtocolDropsTdpCnt | read-only | current | Tdp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.33 | ScalarrcKhiCppProtocolDropsEapCnt | read-only | current | Eap Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.34 | ScalarrcKhiCppProtocolDropsLacpCnt | read-only | current | Lacp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.35 | ScalarrcKhiCppProtocolDropsVlacpCnt | read-only | current | Vlacp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.36 | ScalarrcKhiCppProtocolDropsMldV2Cnt | read-only | current | Mld V2 Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.37 | ScalarrcKhiCppProtocolDropsLldpCnt | read-only | current | Lldp Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.38 | ScalarrcKhiCppProtocolDropsHttpCnt | read-only | current | Http Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.39 | ScalarrcKhiCppProtocolDropsPimUcCnt | read-only | current | Pim Uc Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.40 | ScalarrcKhiCppProtocolDropsOspfUcCnt | read-only | current | Ospf Uc Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.41 | ScalarrcKhiCppProtocolDropsDnsCnt | read-only | current | Dns Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.42 | ScalarrcKhiCppProtocolDropsIcmpBcCnt | read-only | current | Icmp Bc Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.43 | ScalarrcKhiCppProtocolDropsIpfixCnt | read-only | current | Ipfix Drop Counter |
| 1.3.6.1.4.1.2272.1.85.12.5.44 | ScalarrcKhiCppProtocolDropsTestPktCnt | read-only | current | Test Pkt Drop Counter |
| 1.3.6.1.4.1.2272.1.100 | Noderc2k | |||
| 1.3.6.1.4.1.2272.1.100.1 | Noderc2kChassis | |||
| 1.3.6.1.4.1.2272.1.100.1.1 | Scalarrc2kChassisPortOperStatus | read-only | current | A bit array that contains the oper-status of the ports in the device. 2 bits are used for each port. The high order 2 bits of the first octet represent port #0… |
| 1.3.6.1.4.1.2272.1.100.1.2 | Scalarrc2kChassisTemperature | read-only | current | Used to indicate the core operating temperature of the chassis. This value represents the degree in celsius of the air inside the chassis. |
| 1.3.6.1.4.1.2272.1.100.1.5 | Scalarrc2kChassisBaseMacAddr | read-only | current | base mac addr |
| 1.3.6.1.4.1.2272.1.100.1.6 | Scalarrc2kChassisMacAddrCapacity | read-only | current | Mac Address Capacity |
| 1.3.6.1.4.1.2272.1.100.1.10 | Scalarrc2kChassisSystemTempLedColor | read-only | current | Used to indicate the led color of the system temperature which is under or above the threshold. The threshold is 60 degree in celsius. 'green' menas normal. An… |
| 1.3.6.1.4.1.2272.1.100.3 | Tablerc2kCpuSerialPortTable | not-accessible | current | 2k CPU Serial Port table |
| 1.3.6.1.4.1.2272.1.100.3.1 | Rowrc2kCpuSerialPortEntry | not-accessible | current | Entry containing information of 2k CPU Serial Port |
| 1.3.6.1.4.1.2272.1.100.3.1.1 | Columnrc2kCpuSerialPortIfIndex | read-only | current | IfIndex for this port. |
| 1.3.6.1.4.1.2272.1.100.3.1.2 | Columnrc2kCpuSerialPortDescr | read-only | current | Port description. |
| 1.3.6.1.4.1.2272.1.100.3.1.3 | Columnrc2kCpuSerialPortMode | read-write | current | Used to configure the mode this port should operate in. |
| 1.3.6.1.4.1.2272.1.100.3.1.4 | Columnrc2kCpuSerialPortAdminStatus | read-write | current | Used to configure the administrative status setting for this port. |
| 1.3.6.1.4.1.2272.1.100.3.1.5 | Columnrc2kCpuSerialPortOperStatus | read-only | current | Used to indicate the operational status setting for this port. |
| 1.3.6.1.4.1.2272.1.100.3.1.6 | Columnrc2kCpuSerialPortBaudRate | read-write | current | Used to configure the baud rate of this port. |
| 1.3.6.1.4.1.2272.1.100.3.1.7 | Columnrc2kCpuSerialPortDataBits | read-write | current | Used to configure the number of data bits, per byte of data, this port should send/receive. |
| 1.3.6.1.4.1.2272.1.100.3.1.8 | Columnrc2kCpuSerialPortMyAddr | read-write | current | Used to configure this port's IP address. Used for both 'slip' and 'ppp' modes. |
| 1.3.6.1.4.1.2272.1.100.3.1.9 | Columnrc2kCpuSerialPortPeerAddr | read-write | current | Used to configure the peer's IP address. Used for both 'slip' and 'ppp' modes. |
| 1.3.6.1.4.1.2272.1.100.3.1.10 | Columnrc2kCpuSerialPortSlipMtu | read-write | current | Used to configure the MTU for this port. Used for slip only. |
| 1.3.6.1.4.1.2272.1.100.3.1.11 | Columnrc2kCpuSerialPortSlipTxRxCompress | read-write | current | Used to enable/disable compression of TCP/IP packet headers on this port. Used for slip only. |
| 1.3.6.1.4.1.2272.1.100.3.1.12 | Columnrc2kCpuSerialPortSlipRxCompress | read-write | current | Used to enable/disable compression for receiving packets on this port. Used for slip only. |
| 1.3.6.1.4.1.2272.1.100.3.1.13 | Columnrc2kCpuSerialPortPppConfigFile | read-write | current | Used to configure the configuration file to use for PPP. |
| 1.3.6.1.4.1.2272.1.100.4 | Noderc2kDevice | |||
| 1.3.6.1.4.1.2272.1.100.4.1 | Tablerc2kDeviceGlobalTable | not-accessible | current | 2k CPU Ethernet Port table |
| 1.3.6.1.4.1.2272.1.100.4.1.1 | Rowrc2kDeviceGlobalEntry | not-accessible | current | Entry containing information of 2k CPU Ethernet Port |
| 1.3.6.1.4.1.2272.1.100.4.1.1.1 | Columnrc2kDeviceGlobalSlot | read-only | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.1.1.2 | Columnrc2kDeviceGlobalFlashBytesUsed | read-only | current | bytes used |
| 1.3.6.1.4.1.2272.1.100.4.1.1.3 | Columnrc2kDeviceGlobalFlashBytesFree | read-only | current | bytes free |
| 1.3.6.1.4.1.2272.1.100.4.1.1.4 | Columnrc2kDeviceGlobalFlashNumFiles | read-only | current | # files in flash |
| 1.3.6.1.4.1.2272.1.100.4.1.1.5 | Columnrc2kDeviceGlobalPcmciaBytesUsed | read-only | current | bytes used |
| 1.3.6.1.4.1.2272.1.100.4.1.1.6 | Columnrc2kDeviceGlobalPcmciaBytesFree | read-only | current | bytes free |
| 1.3.6.1.4.1.2272.1.100.4.1.1.7 | Columnrc2kDeviceGlobalPcmciaNumFiles | read-only | current | # files in pcmcia |
| 1.3.6.1.4.1.2272.1.100.4.1.1.8 | Columnrc2kDeviceGlobalAction | read-write | current | none(1), resetPcmcia(2), .. |
| 1.3.6.1.4.1.2272.1.100.4.1.1.9 | Columnrc2kDeviceGlobalResult | read-only | current | Used to indicate the result of the last action performed on one of the system's device. |
| 1.3.6.1.4.1.2272.1.100.4.1.1.13 | Columnrc2kDeviceGlobalUsbBytesUsed | read-only | current | bytes used in USB |
| 1.3.6.1.4.1.2272.1.100.4.1.1.14 | Columnrc2kDeviceGlobalUsbBytesFree | read-only | current | bytes free in USB |
| 1.3.6.1.4.1.2272.1.100.4.1.1.15 | Columnrc2kDeviceGlobalUsbNumFiles | read-only | current | # files in USB |
| 1.3.6.1.4.1.2272.1.100.4.1.1.16 | Columnrc2kDeviceGlobalExtflashBytesUsed | read-only | current | bytes used in Extflash |
| 1.3.6.1.4.1.2272.1.100.4.1.1.17 | Columnrc2kDeviceGlobalExtflashBytesFree | read-only | current | bytes free in Extflash |
| 1.3.6.1.4.1.2272.1.100.4.1.1.18 | Columnrc2kDeviceGlobalExtflashNumFiles | read-only | current | # files in Extflash |
| 1.3.6.1.4.1.2272.1.100.4.2 | Scalarrc2kDeviceSeparator1 | read-only | current | This leaf is used to provide a separation between tables. No meaningful information is stored in this variable. |
| 1.3.6.1.4.1.2272.1.100.4.3 | Tablerc2kDeviceFlashFileTable | not-accessible | current | 2k Flash table |
| 1.3.6.1.4.1.2272.1.100.4.3.1 | Rowrc2kDeviceFlashFileEntry | not-accessible | current | Entry containing information of 2k CPU Serial Port |
| 1.3.6.1.4.1.2272.1.100.4.3.1.1 | Columnrc2kDeviceFlashFileSlot | read-only | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.3.1.2 | Columnrc2kDeviceFlashFileName | read-only | current | name of file |
| 1.3.6.1.4.1.2272.1.100.4.3.1.3 | Columnrc2kDeviceFlashFileDate | read-only | current | date |
| 1.3.6.1.4.1.2272.1.100.4.3.1.4 | Columnrc2kDeviceFlashFileSize | read-only | current | size in bytes |
| 1.3.6.1.4.1.2272.1.100.4.4 | Scalarrc2kDevicePcmciaPresent | read-only | current | pcmcia is a slower device. This leaf is used to stop the access into pcmcia file table when it got the end of flash file table. |
| 1.3.6.1.4.1.2272.1.100.4.6 | Scalarrc2kDeviceSeparator2 | read-only | current | This leaf is used to provide a separation between tables. No meaningful information is stored in this variable. |
| 1.3.6.1.4.1.2272.1.100.4.9 | Tablerc2kDeviceExtflashFileTable | not-accessible | current | 2k Flash table |
| 1.3.6.1.4.1.2272.1.100.4.9.1 | Rowrc2kDeviceExtflashFileEntry | not-accessible | current | Entry containing information of extflash files |
| 1.3.6.1.4.1.2272.1.100.4.9.1.1 | Columnrc2kDeviceExtflashFileSlot | not-accessible | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.9.1.2 | Columnrc2kDeviceExtflashFileName | not-accessible | current | name of file |
| 1.3.6.1.4.1.2272.1.100.4.9.1.3 | Columnrc2kDeviceExtflashFileDate | read-only | current | date |
| 1.3.6.1.4.1.2272.1.100.4.9.1.4 | Columnrc2kDeviceExtflashFileSize | read-only | current | size in bytes |
| 1.3.6.1.4.1.2272.1.100.4.10 | Tablerc2kDeviceUsbFileTable | not-accessible | current | 2k Usb table |
| 1.3.6.1.4.1.2272.1.100.4.10.1 | Rowrc2kDeviceUsbFileEntry | not-accessible | current | Entry containing information of USB files |
| 1.3.6.1.4.1.2272.1.100.4.10.1.1 | Columnrc2kDeviceUsbFileSlot | not-accessible | current | slot number |
| 1.3.6.1.4.1.2272.1.100.4.10.1.2 | Columnrc2kDeviceUsbFileName | not-accessible | current | name of file |
| 1.3.6.1.4.1.2272.1.100.4.10.1.3 | Columnrc2kDeviceUsbFileDate | read-only | current | date |
| 1.3.6.1.4.1.2272.1.100.4.10.1.4 | Columnrc2kDeviceUsbFileSize | read-only | current | size in bytes |
| 1.3.6.1.4.1.2272.1.100.5 | Tablerc2kBootConfigTable | not-accessible | current | 2k Boot Configuration table |
| 1.3.6.1.4.1.2272.1.100.5.1 | Rowrc2kBootConfigEntry | not-accessible | current | Entry containing boot configuration information. |
| 1.3.6.1.4.1.2272.1.100.5.1.1 | Columnrc2kBootConfigSlot | read-only | current | slot number, VSP uses 1,2 |
| 1.3.6.1.4.1.2272.1.100.5.1.2 | Columnrc2kBootConfigLastBootConfigSource | read-only | current | boot config source |
| 1.3.6.1.4.1.2272.1.100.5.1.3 | Columnrc2kBootConfigLastRuntimeImageSource | read-only | current | runtime image source |
| 1.3.6.1.4.1.2272.1.100.5.1.4 | Columnrc2kBootConfigLastRuntimeConfigSource | read-only | current | runtime config source |
| 1.3.6.1.4.1.2272.1.100.5.1.5 | Columnrc2kBootConfigPrimaryImageSource | read-write | current | image source |
| 1.3.6.1.4.1.2272.1.100.5.1.6 | Columnrc2kBootConfigPrimaryConfigSource | read-write | current | config source |
| 1.3.6.1.4.1.2272.1.100.5.1.7 | Columnrc2kBootConfigSecondaryImageSource | read-write | current | image source |
| 1.3.6.1.4.1.2272.1.100.5.1.8 | Columnrc2kBootConfigSecondaryConfigSource | read-write | current | config source |
| 1.3.6.1.4.1.2272.1.100.5.1.9 | Columnrc2kBootConfigTertiaryImageSource | read-write | current | image source |
| 1.3.6.1.4.1.2272.1.100.5.1.10 | Columnrc2kBootConfigTertiaryConfigSource | read-write | current | config source |
| 1.3.6.1.4.1.2272.1.100.5.1.11 | Columnrc2kBootConfigEnableAutoBoot | read-write | current | auto boot mode |
| 1.3.6.1.4.1.2272.1.100.5.1.12 | Columnrc2kBootConfigEnableFactoryDefaults | read-write | current | use factory default |
| 1.3.6.1.4.1.2272.1.100.5.1.13 | Columnrc2kBootConfigEnableDebugMode | read-write | current | debug mode |
| 1.3.6.1.4.1.2272.1.100.5.1.14 | Columnrc2kBootConfigEnableHwWatchDogTimer | read-write | current | hw watch dog timer |
| 1.3.6.1.4.1.2272.1.100.5.1.15 | Columnrc2kBootConfigEnableRebootOnError | read-write | current | reboot on error |
| 1.3.6.1.4.1.2272.1.100.5.1.16 | Columnrc2kBootConfigEnableTelnetServer | read-write | current | telnet server |
| 1.3.6.1.4.1.2272.1.100.5.1.17 | Columnrc2kBootConfigEnableRloginServer | read-write | current | rlogin server |
| 1.3.6.1.4.1.2272.1.100.5.1.18 | Columnrc2kBootConfigEnableFtpServer | read-write | current | ftp server |
| 1.3.6.1.4.1.2272.1.100.5.1.19 | Columnrc2kBootConfigEnableTftpServer | read-write | current | tftp server |
| 1.3.6.1.4.1.2272.1.100.5.1.20 | Columnrc2kBootConfigSwVersion | read-only | current | current sw version |
| 1.3.6.1.4.1.2272.1.100.5.1.21 | Columnrc2kBootConfigMulticastConfigProfile | read-only | current | multicast config |
| 1.3.6.1.4.1.2272.1.100.5.1.22 | Columnrc2kBootConfigEnableSshServer | read-write | current | ssh server |
| 1.3.6.1.4.1.2272.1.100.5.1.23 | Columnrc2kBootConfigEnableAltLed | read-write | current | Boot flag for enableing Alternate LED |
| 1.3.6.1.4.1.2272.1.100.5.1.24 | Columnrc2kBootConfigPrimaryBackupConfigSource | read-write | current | primary backup config source (safeconfig) |
| 1.3.6.1.4.1.2272.1.100.5.1.25 | Columnrc2kBootConfigSecondaryBackupConfigSource | read-write | current | secondary backup config source (safeconfig) |
| 1.3.6.1.4.1.2272.1.100.5.1.26 | Columnrc2kBootConfigTertiaryBackupConfigSource | read-write | current | tertiary backup config source (safeconfig) |
| 1.3.6.1.4.1.2272.1.100.5.1.27 | Columnrc2kBootConfigEnable8616ReAutoneg | read-write | current | Enable re-autoneg for 8616SX Cards (Intel GMAC fix) |
| 1.3.6.1.4.1.2272.1.100.5.1.28 | Columnrc2kBootConfigMezzImageSource | read-write | current | Mezz image source |
| 1.3.6.1.4.1.2272.1.100.5.1.29 | Columnrc2kBootConfigEnableMezz | read-write | current | Enable/disable Mezz Flag |
| 1.3.6.1.4.1.2272.1.100.6 | Tablerc2kCardTable | not-accessible | current | 2k Card table |
| 1.3.6.1.4.1.2272.1.100.6.1 | Rowrc2kCardEntry | not-accessible | current | Entry containing information of 2k Card |
| 1.3.6.1.4.1.2272.1.100.6.1.1 | Columnrc2kCardIndex | read-only | current | slot number. |
| 1.3.6.1.4.1.2272.1.100.6.1.2 | Columnrc2kCardFrontType | read-only | current | Used to indicate card types in the Accelar 8000 product families. For Accelar 8000 devices, all cards use an encoded value according to the following rule: | 6… |
| 1.3.6.1.4.1.2272.1.100.6.1.3 | Columnrc2kCardFrontDescription | read-only | current | description |
| 1.3.6.1.4.1.2272.1.100.6.1.4 | Columnrc2kCardFrontAdminStatus | read-write | current | Used to indicate the administrative status of this card |
| 1.3.6.1.4.1.2272.1.100.6.1.5 | Columnrc2kCardFrontOperStatus | read-only | current | Used to indicate the operational status of this card. |
| 1.3.6.1.4.1.2272.1.100.6.1.6 | Columnrc2kCardFrontSerialNum | read-only | current | manufacturer serial number of card |
| 1.3.6.1.4.1.2272.1.100.6.1.8 | Columnrc2kCardFrontPartNumber | read-only | current | manufacturer part number of card |
| 1.3.6.1.4.1.2272.1.100.6.1.9 | Columnrc2kCardFrontDateCode | read-only | current | manufacturer date code |
| 1.3.6.1.4.1.2272.1.100.6.1.10 | Columnrc2kCardFrontDeviations | read-only | current | deviations |
| 1.3.6.1.4.1.2272.1.100.6.1.11 | Columnrc2kCardFrontMacAddr | read-only | current | base mac address |
| 1.3.6.1.4.1.2272.1.100.6.1.12 | Columnrc2kCardBackType | read-only | current | Refer to rc2kCardFrontType for the encoding scheme |
| 1.3.6.1.4.1.2272.1.100.6.1.13 | Columnrc2kCardBackDescription | read-only | current | customer card description |
| 1.3.6.1.4.1.2272.1.100.6.1.14 | Columnrc2kCardBackSerialNum | read-only | current | customer serial number of card |
| 1.3.6.1.4.1.2272.1.100.6.1.15 | Columnrc2kCardBackHwVersion | read-only | current | hardware version |
| 1.3.6.1.4.1.2272.1.100.6.1.16 | Columnrc2kCardBackPartNumber | read-only | current | customer part number |
| 1.3.6.1.4.1.2272.1.100.6.1.17 | Columnrc2kCardBackDateCode | read-only | current | customer date code |
| 1.3.6.1.4.1.2272.1.100.6.1.18 | Columnrc2kCardBackDeviations | read-only | current | customer deviations |
| 1.3.6.1.4.1.2272.1.100.6.1.21 | Columnrc2kCardASICDescr | read-only | current | ASIC descriptor |
| 1.3.6.1.4.1.2272.1.100.6.1.23 | Columnrc2kCardSmltOnSingleCpSupported | read-only | current | Used to indicate whether an IO card is updated to support SMLT on single Cp feature or not. |
| 1.3.6.1.4.1.2272.1.100.6.1.29 | Columnrc2kCardSlotPriority | read-write | current | Used to indicate the priority of the slot for power management. It will take effect only after reboot. |
| 1.3.6.1.4.1.2272.1.100.6.1.30 | Columnrc2kCardSlotOriginalPriority | read-only | current | Priority of the slot for power management which the swtich has currently booted with. It will remain the same until the next reboot. |
| 1.3.6.1.4.1.2272.1.100.6.1.32 | Columnrc2kCardSlotPower | read-write | current | Administrately turn on or off power on this slot. it only applicable on Standby CP & IO and SF Card |
| 1.3.6.1.4.1.2272.1.100.7 | Noderc2kCopyFile | |||
| 1.3.6.1.4.1.2272.1.100.7.1 | Scalarrc2kCopyFileSource | read-write | current | source file |
| 1.3.6.1.4.1.2272.1.100.7.2 | Scalarrc2kCopyFileDestination | read-write | current | dest file |
| 1.3.6.1.4.1.2272.1.100.7.3 | Scalarrc2kCopyFileAction | read-write | current | start or cancell |
| 1.3.6.1.4.1.2272.1.100.7.4 | Scalarrc2kCopyFileResult | read-only | current | result |
| 1.3.6.1.4.1.2272.1.100.8 | Noderc2kQos | |||
| 1.3.6.1.4.1.2272.1.100.8.2 | Tablerc2kQosIngressTagToQosTable | not-accessible | current | This table is used to specify the 802.1P to QOS (802.1P->QOS) mapping on packet ingress. |
| 1.3.6.1.4.1.2272.1.100.8.2.1 | Rowrc2kQosIngressTagToQosEntry | not-accessible | current | Entry containing information of 8021P->Qos mapping |
| 1.3.6.1.4.1.2272.1.100.8.2.1.1 | Columnrc2kQosIngressTagToQosRow | read-only | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.2.1.2 | Columnrc2kQosIngressTagToQosInIeee8021P | read-only | current | 802.1P |
| 1.3.6.1.4.1.2272.1.100.8.2.1.3 | Columnrc2kQosIngressTagToQosQosLevel | read-write | current | Qos level |
| 1.3.6.1.4.1.2272.1.100.8.4 | Tablerc2kQosEgressQosToTagTable | not-accessible | current | This table is used to specify the QOS to 802.1P (QOS->802.1P) mapping on packet egress. |
| 1.3.6.1.4.1.2272.1.100.8.4.1 | Rowrc2kQosEgressQosToTagEntry | not-accessible | current | Entry containing information of Qos->Qos mapping |
| 1.3.6.1.4.1.2272.1.100.8.4.1.1 | Columnrc2kQosEgressQosToTagRow | read-only | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.4.1.2 | Columnrc2kQosEgressQosToTagQosLevel | read-only | current | qos level |
| 1.3.6.1.4.1.2272.1.100.8.4.1.3 | Columnrc2kQosEgressQosToTagOutIeee8021P | read-write | current | 802.1P |
| 1.3.6.1.4.1.2272.1.100.8.6 | Tablerc2kQosTrafficProfileTable | not-accessible | current | This table is used to specify traffic profiles for the system. These traffic profiles are used for policying purposes to guarantee streams of traffic do not eg… |
| 1.3.6.1.4.1.2272.1.100.8.6.1 | Rowrc2kQosTrafficProfileEntry | not-accessible | current | Entry containing information of Qos->Qos mapping |
| 1.3.6.1.4.1.2272.1.100.8.6.1.1 | Columnrc2kQosTrafficProfileId | read-only | current | Profile id |
| 1.3.6.1.4.1.2272.1.100.8.6.1.2 | Columnrc2kQosTrafficProfileName | read-write | current | Profile name |
| 1.3.6.1.4.1.2272.1.100.8.6.1.3 | Columnrc2kQosTrafficProfileEnable | read-write | current | Enable this entry |
| 1.3.6.1.4.1.2272.1.100.8.6.1.4 | Columnrc2kQosTrafficProfileTranslateDscpEnable | read-write | current | Used to specify whether translation of the DSCP field should be performed. If enabled, the value in the DSCP field for packets that fall within the traffic pro… |
| 1.3.6.1.4.1.2272.1.100.8.6.1.5 | Columnrc2kQosTrafficProfileInProfileDscp | read-write | current | Used to specify the DSCP value for 'good' packets. |
| 1.3.6.1.4.1.2272.1.100.8.6.1.6 | Columnrc2kQosTrafficProfileOutProfileDscp | read-write | current | Used to specify the DSCP value for 'violation' packets. |
| 1.3.6.1.4.1.2272.1.100.8.6.1.7 | Columnrc2kQosTrafficProfileDiscardEnable | read-write | current | Used to specify whether packets that fall outside the traffic profile should be discarded. |
| 1.3.6.1.4.1.2272.1.100.8.6.1.8 | Columnrc2kQosTrafficProfileAverageRate | read-write | current | Average rate in packets per second. |
| 1.3.6.1.4.1.2272.1.100.8.6.1.10 | Columnrc2kQosTrafficProfileRowStatus | read-write | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.100.8.7 | Tablerc2kQosIngressDscpToQosTable | not-accessible | current | This table is used to specify the DSCP to QOS (Dscp->QOS) mapping on packet ingress. |
| 1.3.6.1.4.1.2272.1.100.8.7.1 | Rowrc2kQosIngressDscpToQosEntry | not-accessible | current | Entry containing information of Dscp->Qos mapping |
| 1.3.6.1.4.1.2272.1.100.8.7.1.1 | Columnrc2kQosIngressDscpToQosRow | read-only | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.7.1.2 | Columnrc2kQosIngressDscpToQosInDscp | read-only | current | A 6-bit value used to define the Differentiated Service Code Point(DSCP). |
| 1.3.6.1.4.1.2272.1.100.8.7.1.3 | Columnrc2kQosIngressDscpToQosInDscpBinaryFormat | read-only | current | The 'rc2kQosIngressDscpToQosInDscp' value shown in a binary format (network order). |
| 1.3.6.1.4.1.2272.1.100.8.7.1.4 | Columnrc2kQosIngressDscpToQosQosLevel | read-write | current | qos level |
| 1.3.6.1.4.1.2272.1.100.8.8 | Tablerc2kQosEgressQosToDscpTable | not-accessible | current | This table is used to specify the QOS to DSCP field (QOS->DsField) mapping on packet egress. |
| 1.3.6.1.4.1.2272.1.100.8.8.1 | Rowrc2kQosEgressQosToDscpEntry | not-accessible | current | Entry containing information of Qos->Qos mapping |
| 1.3.6.1.4.1.2272.1.100.8.8.1.1 | Columnrc2kQosEgressQosToDscpRow | read-only | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.100.8.8.1.2 | Columnrc2kQosEgressQosToDscpQosLevel | read-only | current | qos level |
| 1.3.6.1.4.1.2272.1.100.8.8.1.3 | Columnrc2kQosEgressQosToDscpOutDscp | read-write | current | A 6-bit value used to define the Differentiated Service Code Point(DSCP). |
| 1.3.6.1.4.1.2272.1.100.8.8.1.4 | Columnrc2kQosEgressQosToDscpOutDscpBinaryFormat | read-only | current | The 'rc2kQosEgressQosToDscpOutDscp' value show in a binary format (network order). |
| 1.3.6.1.4.1.2272.1.100.9 | Noderc2kAtm | |||
| 1.3.6.1.4.1.2272.1.100.9.1 | Noderc2kAtmGlobal | |||
| 1.3.6.1.4.1.2272.1.100.9.2 | Tablerc2kAtmPortTable | not-accessible | current | ATM port table |
| 1.3.6.1.4.1.2272.1.100.9.2.1 | Rowrc2kAtmPortEntry | not-accessible | current | Entry containing information of ATM port |
| 1.3.6.1.4.1.2272.1.100.9.2.1.1 | Columnrc2kAtmPortIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.2.1.2 | Columnrc2kAtmPortNumVpiBits | read-write | current | # of vpi bits. For OC3, the max number of vpibits is 6. However, for OC12, it is 8. Both media types share the same MIB object. |
| 1.3.6.1.4.1.2272.1.100.9.2.1.3 | Columnrc2kAtmPortNumVciBits | read-write | current | # of vci bits |
| 1.3.6.1.4.1.2272.1.100.9.2.1.4 | Columnrc2kAtmPortMediaType | read-only | current | media type |
| 1.3.6.1.4.1.2272.1.100.9.2.1.5 | Columnrc2kAtmPortScrambleEnable | read-write | current | enable scramble |
| 1.3.6.1.4.1.2272.1.100.9.2.1.6 | Columnrc2kAtmPortFramingMode | read-write | current | port framing mode |
| 1.3.6.1.4.1.2272.1.100.9.2.1.7 | Columnrc2kAtmPortClockSource | read-write | current | clock source |
| 1.3.6.1.4.1.2272.1.100.9.2.1.8 | Columnrc2kAtmPortLineSpeed | read-only | current | line speed |
| 1.3.6.1.4.1.2272.1.100.9.2.1.9 | Columnrc2kAtmPortLoopBackMode | read-write | current | loop back mode |
| 1.3.6.1.4.1.2272.1.100.9.2.1.10 | Columnrc2kAtmPortMacAddress | read-only | current | XLR assigned MAC addr |
| 1.3.6.1.4.1.2272.1.100.9.3 | Tablerc2kAtmPvcTable | not-accessible | current | ATM Pvc table |
| 1.3.6.1.4.1.2272.1.100.9.3.1 | Rowrc2kAtmPvcEntry | not-accessible | current | Entry containing information of ATM Pvc |
| 1.3.6.1.4.1.2272.1.100.9.3.1.1 | Columnrc2kAtmPvcIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.3.1.2 | Columnrc2kAtmPvcVpi | read-only | current | vpi of this pvc |
| 1.3.6.1.4.1.2272.1.100.9.3.1.3 | Columnrc2kAtmPvcVci | read-only | current | vci of this pvc |
| 1.3.6.1.4.1.2272.1.100.9.3.1.4 | Columnrc2kAtmPvcPvcId | read-only | current | internal pvc id |
| 1.3.6.1.4.1.2272.1.100.9.3.1.5 | Columnrc2kAtmPvcName | read-write | current | name of pvc |
| 1.3.6.1.4.1.2272.1.100.9.3.1.6 | Columnrc2kAtmPvcEncapsulation | read-write | current | encapsulation |
| 1.3.6.1.4.1.2272.1.100.9.3.1.7 | Columnrc2kAtmPvcServiceType | read-write | current | service type |
| 1.3.6.1.4.1.2272.1.100.9.3.1.8 | Columnrc2kAtmPvcPeakCellRate | read-write | current | Peak cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. However… |
| 1.3.6.1.4.1.2272.1.100.9.3.1.9 | Columnrc2kAtmPvcSustainedCellRate | read-write | current | Sustained cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. Ho… |
| 1.3.6.1.4.1.2272.1.100.9.3.1.10 | Columnrc2kAtmPvcMaxBurstSize | read-write | current | max burst size |
| 1.3.6.1.4.1.2272.1.100.9.3.1.11 | Columnrc2kAtmPvcRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.100.9.3.1.12 | Columnrc2kAtmPvcOamLbMgmtEnable | read-write | current | Indicate whether end-to-end F5 OAM loopback is enabled. When it is enabled, OAM loopback request is sent periodically |
| 1.3.6.1.4.1.2272.1.100.9.3.1.13 | Columnrc2kAtmPvcOamLbSendFrequency | read-write | current | Number of seconds between transmitting OAM loopback request |
| 1.3.6.1.4.1.2272.1.100.9.3.1.14 | Columnrc2kAtmPvcOamLbRetryFrequency | read-write | current | Number of seconds between retry |
| 1.3.6.1.4.1.2272.1.100.9.3.1.15 | Columnrc2kAtmPvcOamLbUpCount | read-write | current | Number of consecutive end-to-end F5 OAM loopback cell responses that must be received in order to change a PVC connection state to up |
| 1.3.6.1.4.1.2272.1.100.9.3.1.16 | Columnrc2kAtmPvcOamLbDownCount | read-write | current | Number of consecutive end-to-end F5 OAM loopback cell responses that are not received in order to change a PVC state to down. |
| 1.3.6.1.4.1.2272.1.100.9.3.1.17 | Columnrc2kAtmPvcOamTrapEnable | read-write | current | Indicate whether OAM trap is enabled. When it is enabled, a trap is sent to the management station when rc2kAtmPvcOamVcStatus is going up or down. |
| 1.3.6.1.4.1.2272.1.100.9.3.1.18 | Columnrc2kAtmPvcOamVcStatus | read-only | current | Indicate the status of PVC link. Not Managed Down Verify loopback cells are sent at retry frequency to verify the VC is really down. After down-count unsuccess… |
| 1.3.6.1.4.1.2272.1.100.9.3.1.19 | Columnrc2kAtmPvcOamLbRequestSent | read-only | current | Number of OAM loopback request sent |
| 1.3.6.1.4.1.2272.1.100.9.3.1.20 | Columnrc2kAtmPvcOamLbReplySent | read-only | current | Number of OAM loopback reply sent |
| 1.3.6.1.4.1.2272.1.100.9.3.1.21 | Columnrc2kAtmPvcOamLbReplyReceived | read-only | current | Number of OAM loopback reply received |
| 1.3.6.1.4.1.2272.1.100.9.5 | Tablerc2kAtm1483ElanTable | not-accessible | current | ATM 1483Elan table |
| 1.3.6.1.4.1.2272.1.100.9.5.1 | Rowrc2kAtm1483ElanEntry | not-accessible | current | Entry containing information of ATM 1483Elan |
| 1.3.6.1.4.1.2272.1.100.9.5.1.1 | Columnrc2kAtm1483ElanIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.5.1.2 | Columnrc2kAtm1483ElanElanId | read-only | current | Elan Id |
| 1.3.6.1.4.1.2272.1.100.9.5.1.3 | Columnrc2kAtm1483ElanNumPvcIds | read-only | current | # pvc-ids in list |
| 1.3.6.1.4.1.2272.1.100.9.5.1.4 | Columnrc2kAtm1483ElanPvcIds | read-write | current | list of pvc-ids. each pvc-id is represented by a 32 bit value this field can contain a maximum of 64 pvc-ids. |
| 1.3.6.1.4.1.2272.1.100.9.5.1.5 | Columnrc2kAtm1483ElanVlanId | read-write | current | vlan tag for this 1483 |
| 1.3.6.1.4.1.2272.1.100.9.5.1.6 | Columnrc2kAtm1483ElanRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.100.9.5.1.7 | Columnrc2kAtm1483ElanConnectType | read-write | current | connection type |
| 1.3.6.1.4.1.2272.1.100.9.5.1.8 | Columnrc2kAtm1483ElanVlanMacAddress | read-only | current | mac for vlan |
| 1.3.6.1.4.1.2272.1.100.9.5.1.9 | Columnrc2kAtm1483ElanDummyMacAddress | read-only | current | dummy mac for the other router |
| 1.3.6.1.4.1.2272.1.100.9.5.1.10 | Columnrc2kAtm1483ElanLocalIpAddress | read-write | current | local ip, if ConnectType is ip(2) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.11 | Columnrc2kAtm1483ElanRemoteIpAddress | read-write | current | remote ip, if ConnectType is ip(2) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.12 | Columnrc2kAtm1483ElanInArpSendEnable | read-write | current | enable arp sending on the port, if ConnectType is ip(2) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.13 | Columnrc2kAtm1483ElanInArpSendInterval | read-write | current | interval of arp sending on the port, if ConnectType is ip(2) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.14 | Columnrc2kAtm1483ElanIpxVlanEncapMethod | read-write | current | vlan encapsulation method, if ConnectType is ipx(3) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.15 | Columnrc2kAtm1483ElanIpxNetworkNum | read-write | current | network number, if ConnectType is ipx(3) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.16 | Columnrc2kAtm1483ElanStgId | read-only | current | An identifier used to identify a STG in the device, only in bridge mode |
| 1.3.6.1.4.1.2272.1.100.9.5.1.17 | Columnrc2kAtm1483ElanrcStgTaggedBpduVlanId | read-only | current | The VLAN ID to be used for tagging BPDUs, only in bridge mode. |
| 1.3.6.1.4.1.2272.1.100.9.5.1.18 | Columnrc2kAtm1483ElanIpxNetworkAddr | read-write | current | network number, instead of rc2kAtm1483ElanIpxNetworkNum |
| 1.3.6.1.4.1.2272.1.100.9.8 | Tablerc2kAtmSioCardConfigTable | not-accessible | current | 2kAtm Sio Card Config Table |
| 1.3.6.1.4.1.2272.1.100.9.8.1 | Rowrc2kAtmSioCardConfigEntry | not-accessible | current | Entry containing information of 2kAtm Sio Card Config. |
| 1.3.6.1.4.1.2272.1.100.9.8.1.1 | Columnrc2kAtmSioCardConfigSlotIndex | read-only | current | slot Index. |
| 1.3.6.1.4.1.2272.1.100.9.8.1.2 | Columnrc2kAtmSioCardConfigAction | read-write | current | |
| 1.3.6.1.4.1.2272.1.100.9.8.1.3 | Columnrc2kAtmSioCardConfigTraceMode | read-write | current | |
| 1.3.6.1.4.1.2272.1.100.9.8.1.4 | Columnrc2kAtmSioCardConfigImageFileName | read-only | current | ATM Image file name. |
| 1.3.6.1.4.1.2272.1.100.9.8.1.5 | Columnrc2kAtmSioCardConfigElanStatsEnable | read-write | current | Enable/Disable Elan Statistics collection |
| 1.3.6.1.4.1.2272.1.100.9.8.1.6 | Columnrc2kAtmSioCardConfigStatsPollPeriod | read-write | current | Time interval after which Elan statistics would be polled |
| 1.3.6.1.4.1.2272.1.100.9.10 | Tablerc2kAtmPortStatsTable | not-accessible | current | ATM port statistics table |
| 1.3.6.1.4.1.2272.1.100.9.10.1 | Rowrc2kAtmPortStatsEntry | not-accessible | current | Entry containing information of ATM port statistics |
| 1.3.6.1.4.1.2272.1.100.9.10.1.1 | Columnrc2kAtmPortStatsIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.10.1.2 | Columnrc2kAtmPortStatsInCells | read-only | current | Number of Cells received from ATM interface |
| 1.3.6.1.4.1.2272.1.100.9.10.1.3 | Columnrc2kAtmPortStatsOutCells | read-only | current | Number of Cells transmitted by ATM interface |
| 1.3.6.1.4.1.2272.1.100.9.10.1.4 | Columnrc2kAtmPortStatsOutIdleCells | read-only | current | Number of Idle Cells transmitted |
| 1.3.6.1.4.1.2272.1.100.9.10.1.5 | Columnrc2kAtmPortStatsInHecCorrected | read-only | current | Number of received cells in which HCS was corrected |
| 1.3.6.1.4.1.2272.1.100.9.10.1.6 | Columnrc2kAtmPortStatsInHecUncorrected | read-only | current | Number of received cells dropped because HCS couldn't be corrected |
| 1.3.6.1.4.1.2272.1.100.9.10.1.7 | Columnrc2kAtmPortStatsInUnknownProtos | read-only | current | Number of received cells dropped with wrong VPI/VCI |
| 1.3.6.1.4.1.2272.1.100.9.10.1.8 | Columnrc2kAtmPortStatsInPkts | read-only | current | Number of AAL5 CPCS PDUs received |
| 1.3.6.1.4.1.2272.1.100.9.10.1.9 | Columnrc2kAtmPortStatsOutPkts | read-only | current | Number of AAL5 CPCS PDUs transmitted |
| 1.3.6.1.4.1.2272.1.100.9.10.1.10 | Columnrc2kAtmPortStatsInDroppedPkts | read-only | current | Number of AAL5 CPCS PDUs dropped due to resource exhaustion |
| 1.3.6.1.4.1.2272.1.100.9.10.1.11 | Columnrc2kAtmPortStatsOutDroppedPkts | read-only | current | Number of AAL5 CPCS PDUs dropped because the transmitter closed the channel |
| 1.3.6.1.4.1.2272.1.100.9.11 | Tablerc2kAtmVPortStatsTable | not-accessible | current | ATM Elan statistics table |
| 1.3.6.1.4.1.2272.1.100.9.11.1 | Rowrc2kAtmVPortStatsEntry | not-accessible | current | Entry containing information of ATM Elan statistics |
| 1.3.6.1.4.1.2272.1.100.9.11.1.1 | Columnrc2kAtmVPortStatsIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.11.1.2 | Columnrc2kAtmVPortStatsVlanId | read-only | current | Vlan Id |
| 1.3.6.1.4.1.2272.1.100.9.11.1.3 | Columnrc2kAtmVPortStatsClear | read-write | current | Clear Elan Stats |
| 1.3.6.1.4.1.2272.1.100.9.11.1.4 | Columnrc2kAtmVPortStatsInOctets | read-only | current | AAL5 CPCS PDU octects received from ATM interface |
| 1.3.6.1.4.1.2272.1.100.9.11.1.5 | Columnrc2kAtmVPortStatsOutOctets | read-only | current | AAL5 CPCS PDU octects transmitted out of ATM interface |
| 1.3.6.1.4.1.2272.1.100.9.11.1.6 | Columnrc2kAtmVPortStatsInErrors | read-only | current | AAL5 CPCS PDUs received with errors from ATM interface. These errors include CRC-32 errors,SAR time-out errors And oversized SDU errors |
| 1.3.6.1.4.1.2272.1.100.9.11.1.7 | Columnrc2kAtmVPortStatsOutErrors | read-only | current | Number of AAL5 CPCS PDUs that couldn't be transmitted due to errors |
| 1.3.6.1.4.1.2272.1.100.9.11.1.8 | Columnrc2kAtmVPortStatsInDiscards | read-only | current | Number of received AAL5 CPCS PDUs discarded |
| 1.3.6.1.4.1.2272.1.100.9.11.1.9 | Columnrc2kAtmVPortStatsOutDiscards | read-only | current | Number of AAL5 CPCS PDUs which are to be transmitted but discarded |
| 1.3.6.1.4.1.2272.1.100.9.11.1.10 | Columnrc2kAtmVPortStatsInUcastPkts | read-only | current | Received ethernet/IP/IPX packets whose destination address is neither a multicast nor a broadcast address |
| 1.3.6.1.4.1.2272.1.100.9.11.1.11 | Columnrc2kAtmVPortStatsOutUcastPkts | read-only | current | Forwarded ethernet/IP/IPX packets whose destination address is neither a multicast nor a broadcast address |
| 1.3.6.1.4.1.2272.1.100.9.11.1.12 | Columnrc2kAtmVPortStatsInMulticastPkts | read-only | current | Received ethernet/IP/IPX packets whose destination MAC address(or IP address in case of IP ELAN type) is multicast MAC address or class D IP address (in case o… |
| 1.3.6.1.4.1.2272.1.100.9.11.1.13 | Columnrc2kAtmVPortStatsOutMulticastPkts | read-only | current | Forwarded ethernet/IP/IPX packets whose destination MAC address(or IP address in case of IP ELAN type) is multicast MAC address or class D IP address (in case … |
| 1.3.6.1.4.1.2272.1.100.9.11.1.14 | Columnrc2kAtmVPortStatsInBroadcastPkts | read-only | current | Received ethernet/IP/IPX packets whose destination address in broadcast address |
| 1.3.6.1.4.1.2272.1.100.9.11.1.15 | Columnrc2kAtmVPortStatsOutBroadcastPkts | read-only | current | Forwarded ethernet/IP/IPX packets whose destination address in broadcast address |
| 1.3.6.1.4.1.2272.1.100.13 | Tablerc2kCpuEthernetPortIpv6RouteTable | not-accessible | current | 2k CPU Ethernet Port Route table for Ipv6 |
| 1.3.6.1.4.1.2272.1.100.13.1 | Rowrc2kCpuEthernetPortIpv6RouteEntry | not-accessible | current | Entry containing information of 2k CPU Ethernet Port Ipv6 |
| 1.3.6.1.4.1.2272.1.100.13.1.1 | Columnrc2kCpuEthernetPortIpv6RouteNetwork | not-accessible | current | Used to configure the ipv6 network that can be used to remotely manage this device. |
| 1.3.6.1.4.1.2272.1.100.13.1.2 | Columnrc2kCpuEthernetPortIpv6RoutePrefixLength | not-accessible | current | The length of the prefix (in bits). |
| 1.3.6.1.4.1.2272.1.100.13.1.3 | Columnrc2kCpuEthernetPortIpv6RouteGateway | not-accessible | current | Used to configure the the IPv6 address of the gateway that should be used to forward IPv6 traffic. |
| 1.3.6.1.4.1.2272.1.100.13.1.4 | Columnrc2kCpuEthernetPortIpv6RouteRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.2272.1.100.17 | Tablerc2kPowerConsumptionInfoTable | not-accessible | current | Power consumption info table for all slots |
| 1.3.6.1.4.1.2272.1.100.17.1 | Rowrc2kPowerConsumptionInfoEntry | not-accessible | current | Entry containing power consumption information of the slot |
| 1.3.6.1.4.1.2272.1.100.17.1.1 | Columnrc2kPowerConsumptionInfoIndex | not-accessible | current | Slot number. |
| 1.3.6.1.4.1.2272.1.100.17.1.2 | Columnrc2kPowerConsumptionInfoPowerStatus | read-only | current | Power operation status of this slot |
| 1.3.6.1.4.1.2272.1.100.17.1.3 | Columnrc2kPowerConsumptionInfoBasePower | read-only | current | The base power required for this slot |
| 1.3.6.1.4.1.2272.1.100.17.1.4 | Columnrc2kPowerConsumptionInfoConsumedPower | read-only | current | The actual consumed power of this slot. Value will be set zero when Power status is 'off' rc2kPowerConsumptionInfoPowerStatus |
| 1.3.6.1.4.1.2272.1.100.17.1.5 | Columnrc2kPowerConsumptionInfoPowerPriority | read-only | current | Used to indicate the priority of the slot for power management |
| 1.3.6.1.4.1.2272.1.100.17.1.6 | Columnrc2kPowerConsumptionInfoSlotDescription | read-only | current | User to indicate the slot type information. Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc |
| 1.3.6.1.4.1.2272.1.100.17.1.7 | Columnrc2kPowerConsumptionInfoCardDescription | read-only | current | Hardware description of this card |
| 1.3.6.1.4.1.2272.1.100.18 | Tablerc2kTemperatureTable | not-accessible | current | Table for retrieving the temperatures of each card (CP, IO, SF) on the chassis |
| 1.3.6.1.4.1.2272.1.100.18.1 | Rowrc2kTemperatureEntry | not-accessible | current | Contains information regarding the temperature of each slot (CP, IO and SF) on the chassis |
| 1.3.6.1.4.1.2272.1.100.18.1.1 | Columnrc2kTemperatureSlotIndex | not-accessible | current | Slot number of either a CP (1,2) or IO (3-12) or SF (21-26). |
| 1.3.6.1.4.1.2272.1.100.18.1.2 | Columnrc2kTemperatureSlotDescription | read-only | current | Used to indicate the slot type information. Such as, 'Slot1'..'Slot12', 'SF1'..'SF4'..etc. |
| 1.3.6.1.4.1.2272.1.100.18.1.3 | Columnrc2kTemperatureZone1Temperature | read-only | current | Zone 1 temperature measured in celsius degree |
| 1.3.6.1.4.1.2272.1.100.18.1.4 | Columnrc2kTemperatureZone2Temperature | read-only | current | Zone 2 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 2 is not available on this slot. |
| 1.3.6.1.4.1.2272.1.100.18.1.5 | Columnrc2kTemperatureZone3Temperature | read-only | current | Zone 3 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 3 is not available on this slot. |
| 1.3.6.1.4.1.2272.1.100.18.1.6 | Columnrc2kTemperatureZone4Temperature | read-only | current | Zone 4 temperature measured in celsius degree |
| 1.3.6.1.4.1.2272.1.100.18.1.7 | Columnrc2kTemperatureZone5Temperature | read-only | current | Zone 5 2 temperature measured in celsius degree. A value of 0 for this mib object indicates that Zone 5 is not available on this slot. |
| 1.3.6.1.4.1.2272.1.100.18.1.8 | Columnrc2kTemperatureHighTemperature | read-only | current | Highest temperature measured in celsius degree |
| 1.3.6.1.4.1.2272.1.100.18.1.9 | Columnrc2kTemperatureLowTemperature | read-only | current | Lowest temperature measured in celsius degree |
| 1.3.6.1.4.1.2272.1.100.18.1.10 | Columnrc2kTemperatureAlarmThreshold | read-only | current | When the card temperature crosses this threshold, an alarm will be set. |
| 1.3.6.1.4.1.2272.1.100.18.1.11 | Columnrc2kTemperatureShutdownThreshold | read-only | current | When the card temperature crosses this threshold, the card will be shutdown. |
| 1.3.6.1.4.1.2272.1.202 | NodercPowerRanger | |||
| 1.3.6.1.4.1.2272.1.202.1 | NodercPowerRangerMib | |||
| 1.3.6.1.4.1.2272.1.202.1.0 | NodercPowerRangerNotifications | |||
| 1.3.6.1.4.1.2272.1.202.1.1 | NodercPowerRangerObjects | |||
| 1.3.6.1.4.1.2272.1.202.1.1.1 | NodercPrQos | |||
| 1.3.6.1.4.1.2272.1.202.1.1.1.1 | NodercPrQosScalars | |||
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.1 | ScalarrcPrQosPolicyNumPolicies | read-only | current | A list of Global Policer (GPID) entries. The number of entries is given by rcPrQosPolicyNumPolicies. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.2 | ScalarrcPrQosTxQueueNumTemplates | read-only | current | The number of egress queue templates currently defined in the switch. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.3 | ScalarrcPrQosFlowPolicerStatsClear | read-write | current | Clear all box-wide policer statistics. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.4 | ScalarrcPrQosLossless8021p | read-write | current | The value used to map Ingress IEEE 1p to lossless internal Qos when lossless Ethernet mode is enabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.5 | ScalarrcPrQosLosslessPfcEnabled | read-only | current | If true then at least one lossless port in the switch has been configured with the value of rcPortLosslessEnetPauseType set to pfc(2). If false then either all… |
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.6 | ScalarrcPrQosLosslessPortsEnablePending | read-write | current | This object is used to inform the system which ports are pending lossless enable and is for internal use. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.1.7 | ScalarrcPrQosLosslessPortsOperPending | read-only | current | Indicates which ports which would be brought down operationally if the set of ports indicated in rcPrQosLosslessPortsEnablePending are configured for lossless … |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2 | TablercPrQosPolicyTable | not-accessible | current | A list of GPID entries. The number of entries is given by rcPrQosPolicyNumPolicies. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1 | RowrcPrQosPolicyEntry | not-accessible | current | Entry containing configuration information for a particular global policer. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.1 | ColumnrcPrQosPolicyGpId | read-only | current | A value that uniquely identifies Global Policer associated with this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.2 | ColumnrcPrQosPolicyName | read-write | current | An administratively-assigned name for this Global Policer. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.3 | ColumnrcPrQosPolicyPeakRate | read-write | current | Global Policer Peak Rate in Kilobit/sec. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.4 | ColumnrcPrQosPolicySvcRate | read-write | current | Global Policer Service Rate in Kilobit/sec. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.5 | ColumnrcPrQosPolicyLaneMembers | read-write | current | The set of lanes that are members of this Global Policer. The string is 4 octets long, for a total of 32 bits. Each bit corresponds to a laneId. Each I/O slot … |
| 1.3.6.1.4.1.2272.1.202.1.1.1.2.1.6 | ColumnrcPrQosPolicyRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3 | TablercPrQosLocalPolicyTable | not-accessible | current | A list of policer entries. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1 | RowrcPrQosLocalPolicyEntry | not-accessible | current | An entry containing configuration information for a particular local policer. This field will return 0 for CB as tap.lane.lpid is not used. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.1 | ColumnrcPrQosLocalPolicyGpId | read-only | current | A value of Global Policer ID corresponding to this local policer. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.2 | ColumnrcPrQosLocalPolicyIndex | read-only | current | The slot number of the VSP chassis on which stats are collected. Valid slots are IO slots which are in slots 3 to 12. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.3 | ColumnrcPrQosLocalPolicyPeakRate | read-only | current | Global Peak Rate in Kilobit/sec. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.4 | ColumnrcPrQosLocalPolicySvcRate | read-only | current | Global Policer Service Rate in Kilobit/sec. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.5 | ColumnrcPrQosLocalPolicyTotalPkts | read-only | current | Global Policer Total Packets Count. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.6 | ColumnrcPrQosLocalPolicyTotalBytes | read-only | current | Global Policer Total Bytes Count. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.7 | ColumnrcPrQosLocalPolicyBytesOverPeak | read-only | current | Global Policer Bytes over Peak Rate Count. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.8 | ColumnrcPrQosLocalPolicyBytesOverSvc | read-only | current | Global Policer Bytes over Service Rate Count. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.9 | ColumnrcPrQosLocalPolicyTotalPktsDropped | read-only | current | The count of Global Policer Total Packets dropped due to reasons other than policing, e.g. congestion. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.10 | ColumnrcPrQosLocalPolicyLaneMember | read-only | current | The lane that this Gpid has a local policing account on |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.11 | ColumnrcPrQosLocalPolicyGreenPackets | read-only | current | The total number of packets received that were below committed rate. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.12 | ColumnrcPrQosLocalPolicyGreenBytes | read-only | current | The total number of bytes received that were below the committed rate. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.13 | ColumnrcPrQosLocalPolicyYellowPackets | read-only | current | The total number of packets received that were above the committed rate but below the peak rate. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.14 | ColumnrcPrQosLocalPolicyYellowBytes | read-only | current | The total number of bytes received that were above the committed rate but below the peak rate. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.15 | ColumnrcPrQosLocalPolicyRedPackets | read-only | current | The total number of packets received that were above the peak rate. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.16 | ColumnrcPrQosLocalPolicyRedBytes | read-only | current | The total number of bytes received that were above the peak rate. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.3.1.17 | ColumnrcPrQosLocalPolicyStatsClear | read-write | current | Clear Qos Policy statistics. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4 | TablercPrQosTxQueueTemplateTable | not-accessible | current | A list of egress queue templates. The number of templates is given by rcPrQosTxQueueNumTemplates. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1 | RowrcPrQosTxQueueTemplateEntry | not-accessible | current | Entry containing configuration information for a particular egress queue template. Queue is a set of egress queues. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.1 | ColumnrcPrQosTxQueueTemplateId | read-only | current | A value that uniquely identifies Egress Queue Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.2 | ColumnrcPrQosTxQueueTemplateName | read-write | current | An administratively-assigned name for this egress Queue Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.3 | ColumnrcPrQosTxQueueTemplateMaxQueues | read-create | current | Maximum number of queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.4 | ColumnrcPrQosTxQueueTemplateBalancedQueues | read-write | current | Total number of Balanced Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.5 | ColumnrcPrQosTxQueueTemplateHiPriQueues | read-write | current | Total number of High Priority Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.6 | ColumnrcPrQosTxQueueTemplateLoPriQueues | read-write | current | Total number of Low Priority Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.7 | ColumnrcPrQosTxQueueTemplateTotalQueues | read-only | current | Total number of queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.8 | ColumnrcPrQosTxQueueTemplateBalancedQList | read-only | current | List of Balanced Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.9 | ColumnrcPrQosTxQueueTemplateHiPriQList | read-only | current | List of High Priority Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.10 | ColumnrcPrQosTxQueueTemplateLoPriQList | read-only | current | List of Low Priority Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.11 | ColumnrcPrQosTxQueueTemplateTotalQLists | read-only | current | List of Total Physical Queues in this Template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.12 | ColumnrcPrQosTxQueueTemplateMinRateTotal | read-only | current | Sum of minimum rate guarantees for this template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.13 | ColumnrcPrQosTxQueueTemplateMaxRateHiPri | read-only | current | Sum of maximum rate guarantees for high priority queues of this template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.14 | ColumnrcPrQosTxQueueTemplatePortMembers | read-write | current | Port members of this template. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.15 | ColumnrcPrQosTxQueueTemplateFlags | read-write | current | Bitset indicated template state. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.16 | ColumnrcPrQosTxQueueTemplateApply | read-write | current | When apply is issued by the administrator, the Egress Queue Set attributes are committed. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.4.1.17 | ColumnrcPrQosTxQueueTemplateRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5 | TablercPrQosTxQueueTable | not-accessible | current | A list of elementary Egress queue entries. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1 | RowrcPrQosTxQueueEntry | not-accessible | current | Entry containing configuration information for a particular elementary egress queue. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.1 | ColumnrcPrQosTxQueueTid | read-write | current | Template ID of the template this queue belongs to. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.2 | ColumnrcPrQosTxQueueQid | read-only | current | Queue Offset from the base queue for this port. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.3 | ColumnrcPrQosTxQueueName | read-write | current | An NNSC name for this egress queue. Allowed only for 8 NNSC queues. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.4 | ColumnrcPrQosTxQueueStyle | read-write | current | Egress queue style. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.5 | ColumnrcPrQosTxQueueWeight | read-only | current | Egress queue weight. Applicable for balanced queues and lo-pri queues only. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.6 | ColumnrcPrQosTxQueueMaxRate | read-write | current | Egress queue maximum rate, Kbs |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.7 | ColumnrcPrQosTxQueueMinRate | read-write | current | Egress queue minimun rate guarantee, Kbs. Applicable for balanced queues and lo-pri queues only. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.8 | ColumnrcPrQosTxQueueBquantum | read-only | current | Bandwidth allocation unit. Applicable for balanced queues and lo-pri queues only. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.9 | ColumnrcPrQosTxQueueMaxLength | read-write | current | Maximum queue length. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.10 | ColumnrcPrQosTxQueueWredCurveSet | read-write | current | Random Early Detection Number. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.5.1.11 | ColumnrcPrQosTxQueueRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6 | TablercPrQosTxQueueStatsTable | not-accessible | current | A list of elementary Egress queue stats entries. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6.1 | RowrcPrQosTxQueueStatsEntry | not-accessible | current | Entry containing statistics information for a particular elementary egress queue. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.1 | ColumnrcPrQosTxQueueStatsPort | read-only | current | Port index of the stats table. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.2 | ColumnrcPrQosTxQueueStatsQid | read-only | current | Queue Offset from the base queue for this port. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.3 | ColumnrcPrQosTxQueueStatsTotalPages | read-only | current | Total pages offered to the queue. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.4 | ColumnrcPrQosTxQueueStatsDroppedPages | read-only | current | Total pages dropped by the queue. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.6.1.5 | ColumnrcPrQosTxQueueStatsUtilization | read-only | current | Utilization percentage of the queue. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.7 | TablercPrQosIngressExpToQosTable | not-accessible | current | This table is used to specify the Mpls EXP to QOS (Exp bit->QOS) mapping on packet ingress. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.7.1 | RowrcPrQosIngressExpToQosEntry | not-accessible | current | Entry containing information of Exp bit->Qos mapping |
| 1.3.6.1.4.1.2272.1.202.1.1.1.7.1.1 | ColumnrcPrQosIngressExpToQosIndex | not-accessible | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.7.1.4 | ColumnrcPrQosIngressExpToQosRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.8 | TablercPrQosEgressQosToExpTable | not-accessible | current | This table is used to specify the QOS to Mpls EXP bit field (QOS->Exp bit) mapping on packet egress. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.8.1 | RowrcPrQosEgressQosToExpEntry | not-accessible | current | Entry containing information of Qos->Exp bit mapping |
| 1.3.6.1.4.1.2272.1.202.1.1.1.8.1.1 | ColumnrcPrQosEgressQosToExpIndex | not-accessible | current | Used to uniquely identify a row in this table. |
| 1.3.6.1.4.1.2272.1.202.1.1.1.8.1.4 | ColumnrcPrQosEgressQosToExpRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2 | NodercPrFilter | |||
| 1.3.6.1.4.1.2272.1.202.1.1.2.1 | NodercPrFilterScalars | |||
| 1.3.6.1.4.1.2272.1.202.1.1.2.1.2 | ScalarrcPrFilterAclTableSize | read-only | current | Used to indicate the number of Acl entries in the rcPrFilterAclTable. Default table size is 0 until the administrator configures any Acl entries. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.1.3 | ScalarrcPrFilterAceTableSize | read-only | current | Used to indicate the number of Ace entries in the rcPrFilterAceTable. Default table size is 0 until the administrator configures any Ace entries. The maximum s… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.1.4 | ScalarrcPrFilterAclBufferWrap | read-write | current | Used to enable or disable buffer wrapping for filters log. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.1.5 | ScalarrcPrFilterAclClearLog | read-write | current | Used to clear the filter Logs collected. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2 | NodercPrFilterAct | |||
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1 | TablercPrFilterActTable | not-accessible | current | A table of Acts to store information of each Act entry. This table is indexed by the Act Id. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1 | RowrcPrFilterActEntry | not-accessible | current | One Act Entry holding Act information. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.1 | ColumnrcPrFilterActId | read-only | current | A table of Acts to store information of each Act. This table is indexed by the Act Id. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.2 | ColumnrcPrFilterActName | read-write | current | A descriptive name chosen by the administrator for the Act Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.3 | ColumnrcPrFilterActArpAttrs | read-write | current | Value is one or multiple (logical 'OR' of the following): none(0), operation(1) none: No Arp Attrs are selected or to clear other choices. operation: Only vali… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.4 | ColumnrcPrFilterActEthernetAttrs | read-write | current | Value is one or multiple of the following: none(0), srcMac(1), dstMac(2), etherType(4), port(8), vlan(16), vlanTagPrio(32) none: If selected then unselect all … |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.5 | ColumnrcPrFilterActIpAttrs | read-write | current | Value is one or multiple of the following: none(0), srcIp(1), dstIp(2), ipFragFlag(4), ipOptions(8), ipProtoType(16), dscp(32) none: If selected then unselect … |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.6 | ColumnrcPrFilterActProtocolAttrs | read-write | current | Value is one or multiple of the following: none(0), tcpSrcPort(1), udpSrcPort(2), tcpDstPort(4), udpDstPort(8), tcpFlags(16), icmpMsgType(32) none: If selected… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.7 | ColumnrcPrFilterActApply | read-write | current | When apply is issued by the administrator, the ACT attributes cannot be modified. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.8 | ColumnrcPrFilterActRowStatus | read-write | current | Create/delete operations for this entry. The entry cannot be modified or deleted while there are Acls configured with this Act entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.1.1.9 | ColumnrcPrFilterActIpv6Attrs | read-write | current | Value is one or multiple of the following: none(0), srcIpv6(1), dstIpv6(4), nextHdr(16), none: If selected then unselect all other selections. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2 | TablercPrFilterActPatternTable | not-accessible | current | A table of user-defined parameters of Acls to store information of each Acl. This table is indexed by the Act Id and PatternIndex. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1 | RowrcPrFilterActPatternEntry | not-accessible | current | Entry containing Configuration information for a particular Act. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.1 | ColumnrcPrFilterActPatternActId | read-only | current | An index to the ActPatternEntry, a unique identifier for Act entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.2 | ColumnrcPrFilterActPatternIndex | read-only | current | Indexes each user defined field pattern in an Acl entry. In this release only 3 patterns are allowed per ACT but we can have multiple patterns per ACL. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.3 | ColumnrcPrFilterActPatternName | read-write | current | A descriptive name chosen by the administrator for the Acl Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.4 | ColumnrcPrFilterActPatternBase | read-write | current | User defined fields from headers to be used in the Aces of the Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.5 | ColumnrcPrFilterActPatternOffset | read-write | current | Set Offset in bytes to the beginning offset of the user defined field with selected header option as base. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.6 | ColumnrcPrFilterActPatternLength | read-write | current | The number of bytes to extract beginning from the offset is set in rcPrFilterActPatternLength. Only 1-15 are valid. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.2.2.1.7 | ColumnrcPrFilterActPatternRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3 | NodercPrFilterAcl | |||
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1 | TablercPrFilterAclTable | not-accessible | current | A table of Acls to store information of each Acl. This table is indexed by the Acl Id. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1 | RowrcPrFilterAclEntry | not-accessible | current | Entry containing Configuration information for a particular Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.1 | ColumnrcPrFilterAclId | read-only | current | A unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.3 | ColumnrcPrFilterAclName | read-write | current | A descriptive name chosen by the administrator for the Acl Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.4 | ColumnrcPrFilterAclType | read-write | current | An Acl can be vlan-based or port-based. An Ace has a capability to match packets classified as 'ingress' and 'egress'. An ingress packet is assigned a value 'i… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.5 | ColumnrcPrFilterAclAceListSize | read-only | current | Indicates the number of Aces in a particular Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.6 | ColumnrcPrFilterAclDefaultAction | read-write | current | Indicates action to be taken when none of the Aces in the Acl match. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.8 | ColumnrcPrFilterAclState | read-write | current | Enables/Disables the state of all Aces in the Acl |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.9 | ColumnrcPrFilterAclVlanList | read-write | current | An array used to indicate all the VLANs to be associated with this Acl Entry. At present, only 4k Vlans are supported. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.10 | ColumnrcPrFilterAclPortList | read-write | current | Indicates the ports to be added to this Acl Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.11 | ColumnrcPrFilterAclRowStatus | read-write | current | Create/delete operations for the entry. Deleting a non-empty Acl results in deletion of member Aces and then the Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.12 | ColumnrcPrFilterAclNumVlanIds | read-only | current | Used to Indicate the number of VLAN ID's that are stored in the rcPrFilterAclVlanList. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.13 | ColumnrcPrFilterAclPktType | read-write | current | Indicates the packet type that thsi ACL is applicable to. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.14 | ColumnrcPrFilterAclControlPktRule | read-write | current | When the rcPrFilterAclDefaultAction object is set to deny then control packets follow this rule. Otherwise, the object value can be ignored. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.15 | ColumnrcPrFilterAclVlanId | read-write | current | Destination Vlan Id for mirroring the packets. The value 0 means no vlan is being mirrored. When the value of rcPrFilterAclVlanId is non-zero, the values of rc… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.16 | ColumnrcPrFilterAclMltId | read-write | current | Destination Mlt Id for mirroring the packets. The value 0 means no mlt is being mirrored. When the value of rcPrFilterAclMltId is non-zero, the values of rcPrF… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.17 | ColumnrcPrFilterAclDstPortList | read-write | current | Destination Port List for mirroring the packets. The value 0 means no port(s) is being mirrored. When the value of rcPrFilterAclDstPortList is non-zero, the va… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.1.1.18 | ColumnrcPrFilterAclIpfixState | read-write | current | Value indicating whether ipfix option on the Acl is enabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2 | TablercPrFilterAclStatsTable | not-accessible | current | A table of Acls Statistics entries to store the Default Acl statistics for each Acl. This table is indexed by the Acl Id. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1 | RowrcPrFilterAclStatsEntry | not-accessible | current | Entry containing default statistics information for a particular Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.1 | ColumnrcPrFilterAclStatsAclId | read-only | current | A unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.4 | ColumnrcPrFilterAclStatsClear | read-write | current | Clear default statistics for ACL Filters. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.5 | ColumnrcPrFilterAclStatsMatchDefaultSecurityPkts | read-only | current | Security packet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.6 | ColumnrcPrFilterAclStatsMatchDefaultSecurityOctets | read-only | current | Security octet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.7 | ColumnrcPrFilterAclStatsMatchDefaultQosPkts | read-only | current | QOS packet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.8 | ColumnrcPrFilterAclStatsMatchDefaultQosOctets | read-only | current | QOS octet count of traffic not matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.9 | ColumnrcPrFilterAclStatsMatchGlobalSecurityPkts | read-only | current | Security packet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.10 | ColumnrcPrFilterAclStatsMatchGlobalSecurityOctets | read-only | current | Security octet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.11 | ColumnrcPrFilterAclStatsMatchGlobalQosPkts | read-only | current | QOS packet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.3.2.1.12 | ColumnrcPrFilterAclStatsMatchGlobalQosOctets | read-only | current | QOS octet count of traffic matching any of the ACE rules or hits on Default Action where the count bit is turned on in ACL Global Action. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4 | NodercPrFilterAce | |||
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1 | TablercPrFilterAceTable | not-accessible | current | A table of Aces to store information of each Ace in context of its parent Acl. This is indexed by AclId and AceId. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1 | RowrcPrFilterAceEntry | not-accessible | current | One Ace entry holding Ace information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.1 | ColumnrcPrFilterAceAclId | read-only | current | An index to the AceEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.2 | ColumnrcPrFilterAceId | read-only | current | AceId uniquely identifies one Ace entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.3 | ColumnrcPrFilterAceName | read-write | current | A descriptive name chosen by the administrator. System automatically assigns a name if the user has not assigned one. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.4 | ColumnrcPrFilterAceMode | read-write | current | Operating Mode associated with the Ace is effective on the packets matching this Ace. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.5 | ColumnrcPrFilterAceRemarkDscp | read-write | current | The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (li… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.6 | ColumnrcPrFilterAceRemarkDot1Priority | read-write | current | Dot1 Priority as described by Layer 2 standards, 802.1Q, 802.1P. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.7 | ColumnrcPrFilterAceRedirectNextHop | read-write | current | Redirect matching IP traffic to the next hop. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.8 | ColumnrcPrFilterAceRedirectUnreach | read-write | current | Set the desired behavior for redirected traffic in case the specified next-hop is not reachable. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.9 | ColumnrcPrFilterAcePolice | read-write | current | Policing profile Identifier. Set the desired policing profile identifier. Set the value to 0 when policing is not desired. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.10 | ColumnrcPrFilterAceAdminState | read-write | current | Value indicating whether the Ace is enabled. An Ace can only be modified if it is disabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.11 | ColumnrcPrFilterAceOperState | read-only | current | The current operational state of the Ace. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.18 | ColumnrcPrFilterAceMltIndex | read-write | current | If this action is specified, it will basically override the mlt-index picked by the mlt algorithm, when a packet is being sent out on MLT ports. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.19 | ColumnrcPrFilterAceRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.20 | ColumnrcPrFilterAceIpfixState | read-write | current | Value indicating whether ipfix option on the Ace is enabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.21 | ColumnrcPrFilterAceRedirectNextHopIpv6 | read-write | current | Redirect matching IPv6 traffic to the next hop. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.22 | ColumnrcPrFilterAceDstPortList | read-create | current | Destination Port List for mirroring the packets. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.23 | ColumnrcPrFilterAceDstVlanId | read-create | current | Destination Vlan to mirror the packets. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.24 | ColumnrcPrFilterAceDstMltId | read-create | current | Destination Mlt to mirror the packets. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.25 | ColumnrcPrFilterAceInternalQos | read-write | current | Internal QOS Level assigned to the packet flow DefVal = 8 is disable |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.26 | ColumnrcPrFilterAceCount | read-write | current | Value indicating whether Count option on the Ace is enabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.27 | ColumnrcPrFilterAceLog | read-write | current | Value indicating whether log option on the Ace is enabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.28 | ColumnrcPrFilterAceCopytoPcap | read-write | current | Value indicating whether copy to pcap option on the Ace is enabled. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.29 | ColumnrcPrFilterAceDstIp | read-write | current | Destination IP address to mirror the packets. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.30 | ColumnrcPrFilterAceDstIpTtl | read-write | current | Ttl value for the mirrored packet when mirror destination is IP. If other than default, the encapsulated packet will have the given ttl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.31 | ColumnrcPrFilterAceDstIpDscp | read-write | current | Dscp value for the mirrored packet when mirror destination is IP. The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffSer… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2 | TablercPrFilterAceEthSrcAddrTable | not-accessible | current | A table of Aces to store Ethernet Source MAC Address Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1 | RowrcPrFilterAceEthSrcAddrEntry | not-accessible | current | One Ace entry holding Ace Ethernet Source MAC Address information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.1 | ColumnrcPrFilterAceEthSrcAddrAclId | read-only | current | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.2 | ColumnrcPrFilterAceEthSrcAddrAceId | read-only | current | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.3 | ColumnrcPrFilterAceEthSrcAddrList | read-write | current | The list of ethernet source address to match. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.4 | ColumnrcPrFilterAceEthSrcAddrListCount | read-write | current | Count to store the number of discrete ranges entered for the ethernet src address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.5 | ColumnrcPrFilterAceEthSrcAddrOper | read-write | current | Operators for Ace Ethernet Source MAC Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.6 | ColumnrcPrFilterAceEthSrcAddrRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.2.1.7 | ColumnrcPrFilterAceEthSrcAddrOperMask | read-write | current | The Mac Address mask value in hex which can be set for the rcPrFilterAceEthSrcAddrOper when the option selected is mask. It will be empty or set to 00000000000… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3 | TablercPrFilterAceEthDstAddrTable | not-accessible | current | A table of Aces to store Ethernet Destination MAC Address Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1 | RowrcPrFilterAceEthDstAddrEntry | not-accessible | current | One Ace entry holding Ace Ethernet Destination MAC Address information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.1 | ColumnrcPrFilterAceEthDstAddrAclId | read-only | current | An index to the AceEthDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.2 | ColumnrcPrFilterAceEthDstAddrAceId | read-only | current | An index to the AceEthDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.3 | ColumnrcPrFilterAceEthDstAddrList | read-write | current | List of ethernet destination address to match. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.4 | ColumnrcPrFilterAceEthDstAddrListCount | read-write | current | Count to store the number of discrete ranges entered for the ethernet dst address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.5 | ColumnrcPrFilterAceEthDstAddrOper | read-write | current | Operators for Ace Ethernet Destination MAC Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.6 | ColumnrcPrFilterAceEthDstAddrRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.3.1.7 | ColumnrcPrFilterAceEthDstAddrOperMask | read-write | current | The Mac Address mask value in hex which can be set for the rcPrFilterAceEthDstAddrOper when the option selected is mask. It will be empty or set to 00000000000… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4 | TablercPrFilterAceEthEtherTable | not-accessible | current | A table of Aces to store Ethernet Ether Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1 | RowrcPrFilterAceEthEtherEntry | not-accessible | current | One Ace entry holding Ace Ethernet Ether information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.1 | ColumnrcPrFilterAceEthEtherAclId | read-only | current | An index to the AceEthEtherEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.2 | ColumnrcPrFilterAceEthEtherAceId | read-only | current | An index to the AceEthEtherEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.3 | ColumnrcPrFilterAceEthEtherTypeList | read-write | current | EtherType value from ethernet header. For example ARP uses 0x0806, IP uses 0x0800. The platform support determines the behavior for 802.1Q/p tagged packets. Th… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.4 | ColumnrcPrFilterAceEthEtherTypeListCount | read-write | current | Count to store the number of discrete ranges entered for the ethernet types. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.5 | ColumnrcPrFilterAceEthEtherTypeOper | read-write | current | Ethernet Type Operators. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.4.1.6 | ColumnrcPrFilterAceEthEtherRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5 | TablercPrFilterAceEthVlanTagPrioTable | not-accessible | current | A table of Aces to store Ethernet Vlan Tag Priority Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1 | RowrcPrFilterAceEthVlanTagPrioEntry | not-accessible | current | One Ace entry holding Ace Ethernet Vlan Tag Priority information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.1 | ColumnrcPrFilterAceEthVlanTagPrioAclId | read-only | current | An index to the AceEthVlanTagPrioEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.2 | ColumnrcPrFilterAceEthVlanTagPrioAceId | read-only | current | An index to the AceEthVlanTagPrioEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.3 | ColumnrcPrFilterAceEthVlanTagPrioVlanTagPrio | read-write | current | Priority bits (3-bit field) from the 802.1Q/p tag. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.4 | ColumnrcPrFilterAceEthVlanTagPrioOper | read-write | current | Operators for Ace Ethernet Vlan Tag Priority. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.5 | ColumnrcPrFilterAceEthVlanTagPrioRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.6 | ColumnrcPrFilterAceEthVlanTagPrioOperMask | read-write | current | The mask value in hex which can be set for the rcPrFilterAceEthVlanTagPrioOper when the option selected is masked. This object is applicable for VSP9000. Not f… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6 | TablercPrFilterAceEthPortTable | not-accessible | current | A table of Aces to store Ethernet Port Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1 | RowrcPrFilterAceEthPortEntry | not-accessible | current | One Ace entry holding Ace Ethernet Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.1 | ColumnrcPrFilterAceEthPortAclId | read-only | current | An index to the AceEthPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.2 | ColumnrcPrFilterAceEthPortAceId | read-only | current | An index to the AceEthPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.3 | ColumnrcPrFilterAceEthPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.4 | ColumnrcPrFilterAceEthPortOper | read-write | current | Operator for Ace Ethernet Port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.5 | ColumnrcPrFilterAceEthPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7 | TablercPrFilterAceEthVlanIdTable | not-accessible | current | A table of Aces to store Ethernet Vlan Id Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1 | RowrcPrFilterAceEthVlanIdEntry | not-accessible | current | One Ace entry holding Ace Ethernet Vlan Id information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.1 | ColumnrcPrFilterAceEthVlanIdAclId | read-only | current | An index to the AceEthVlanIdEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.2 | ColumnrcPrFilterAceEthVlanIdAceId | read-only | current | An index to the AceEthVlanIdEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.3 | ColumnrcPrFilterAceEthVlanIdVlanIdList | read-write | current | Vlan Id to match on. This is a ERS 8600 supported object. VSP9000 uses rcPrFilterAceEthVlanIdVlanId instead |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.4 | ColumnrcPrFilterAceEthVlanIdOper | read-write | current | Operator for Ace Ethernet VlanId. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.5 | ColumnrcPrFilterAceEthVlanIdRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.6 | ColumnrcPrFilterAceEthVlanIdOperMask | read-write | current | The mask value in hex which can be set for the rcPrFilterAceEthVlanIdOper when the option selected is mask. This object is used with rcPrFilterAceEthVlanIdVlan… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.7 | ColumnrcPrFilterAceEthVlanIdVlanId | read-write | current | Vlan Id to match on. VSP9000 use this object with object rcPrFilterAceEthVlanIdOperMask to replace the rcPrFilterAceEthVlanIdVlanIdList |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8 | TablercPrFilterAceArpTable | not-accessible | current | A table of Aces to store Arp Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1 | RowrcPrFilterAceArpEntry | not-accessible | current | One Ace entry holding Ace Arp Header information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.1 | ColumnrcPrFilterAceArpAclId | read-only | current | An index to the AceArpEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.2 | ColumnrcPrFilterAceArpAceId | read-only | current | An index to the AceArpEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.3 | ColumnrcPrFilterAceArpType | read-write | current | Ace Arp Operation. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.4 | ColumnrcPrFilterAceArpOper | read-write | current | Operator for Ace Arp Operation. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.5 | ColumnrcPrFilterAceArpValue | read-write | current | Ace Arp can be a request or a response. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.6 | ColumnrcPrFilterAceArpRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9 | TablercPrFilterAceIpSrcAddrTable | not-accessible | current | A table of Aces to store IP Source Address Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1 | RowrcPrFilterAceIpSrcAddrEntry | not-accessible | current | One Ace entry holding Ace IP Source Address Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.1 | ColumnrcPrFilterAceIpSrcAddrAclId | read-only | current | An index to the AceIpSrcAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.2 | ColumnrcPrFilterAceIpSrcAddrAceId | read-only | current | An index to the AceIpSrcAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.5 | ColumnrcPrFilterAceIpSrcAddrOper | read-write | current | Operators for Ace Ip Source Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.6 | ColumnrcPrFilterAceIpSrcAddrRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.7 | ColumnrcPrFilterAceIpSrcAddrIpAddr | read-write | current | IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.8 | ColumnrcPrFilterAceIpSrcAddrOperMaskRange | read-write | current | The IP Mask value or High IP address based on object rcPrFilterAceIpSrcAddrOper mask/range option is selected. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10 | TablercPrFilterAceIpDstAddrTable | not-accessible | current | A table of Aces to store IP Destination Address Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1 | RowrcPrFilterAceIpDstAddrEntry | not-accessible | current | One Ace entry holding Ace IP Destination Address Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.1 | ColumnrcPrFilterAceIpDstAddrAclId | read-only | current | An index to the AceIpDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.2 | ColumnrcPrFilterAceIpDstAddrAceId | read-only | current | An index to the AceIpDstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.5 | ColumnrcPrFilterAceIpDstAddrOper | read-write | current | Operators for Ace IP Destination Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.6 | ColumnrcPrFilterAceIpDstAddrRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.7 | ColumnrcPrFilterAceIpDstAddrIpAddr | read-write | current | IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.8 | ColumnrcPrFilterAceIpDstAddrOperMaskRange | read-write | current | The IP mask value or Hi Ip address based on object rcPrFilterAceIpDstAddrOper mask/range option is selected. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11 | TablercPrFilterAceIpDscpTable | not-accessible | current | A table of Aces to store IP Dscp Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1 | RowrcPrFilterAceIpDscpEntry | not-accessible | current | One Ace entry holding Ace IP Dscp Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.1 | ColumnrcPrFilterAceIpDscpAclId | read-only | current | An index to the AceIpDscpEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.2 | ColumnrcPrFilterAceIpDscpAceId | read-only | current | An index to the AceIpDscpEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.3 | ColumnrcPrFilterAceIpDscpList | read-write | current | The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (li… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.4 | ColumnrcPrFilterAceIpDscpListCount | read-write | current | Count to store the number of discrete ranges entered for the dscp values. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.5 | ColumnrcPrFilterAceIpDscpOper | read-write | current | Operators for Ace Ip Dscp. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.6 | ColumnrcPrFilterAceIpDscpRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.7 | ColumnrcPrFilterAceIpDscpOperMask | read-write | current | The mask value in hex which can be set for the rcPrFilterAceIpDscpOper when the option selected is mask. It will be set to 0 or be used when rcPrFilterAceIpDsc… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12 | TablercPrFilterAceIpProtoTable | not-accessible | current | A table of Aces to store IP Proto Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1 | RowrcPrFilterAceIpProtoEntry | not-accessible | current | One Ace entry holding Ace IP Proto Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.1 | ColumnrcPrFilterAceIpProtoAclId | read-only | current | An index to the AceIpProtoEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.2 | ColumnrcPrFilterAceIpProtoAceId | read-only | current | An index to the AceIpProtoEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.3 | ColumnrcPrFilterAceIpProtoList | read-write | current | Ip protocol Type from the ip header to be matched. Valid Ip protocol range is 0..255. Few of the Protocol Types are enumerated above. In case the desired proto… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.4 | ColumnrcPrFilterAceIpProtoListCount | read-write | current | Count to store the number of discrete ranges entered for the ethernet protocol ids. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.5 | ColumnrcPrFilterAceIpProtoOper | read-write | current | Operators for Ace Ip Protocols. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.6 | ColumnrcPrFilterAceIpProtoRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13 | TablercPrFilterAceIpOptionsTable | not-accessible | current | A table of Aces to store IP Options Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1 | RowrcPrFilterAceIpOptionsEntry | not-accessible | current | One Ace entry holding Ace IP Options Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.1 | ColumnrcPrFilterAceIpOptionsAclId | read-only | current | An index to the AceIpOptionsEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.2 | ColumnrcPrFilterAceIpOptionsAceId | read-only | current | An index to the AceIpOptionsEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.3 | ColumnrcPrFilterAceIpOptionsOptions | read-write | current | Ip options to be matched from the IP Header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.4 | ColumnrcPrFilterAceIpOptionsOper | read-write | current | Logical Operator - only 'any' is valid at present. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.5 | ColumnrcPrFilterAceIpOptionsRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14 | TablercPrFilterAceIpFragTable | not-accessible | current | A table of Aces to store IP Fragmentation Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1 | RowrcPrFilterAceIpFragEntry | not-accessible | current | One Ace entry holding Ace IP Fragmentation Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.1 | ColumnrcPrFilterAceIpFragAclId | read-only | current | An index to the AceIpFragEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.2 | ColumnrcPrFilterAceIpFragAceId | read-only | current | An index to the AceIpFragEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.3 | ColumnrcPrFilterAceIpFragFragmentation | read-write | current | Ip Fragmentation bits to be matched from the IP Header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.4 | ColumnrcPrFilterAceIpFragOper | read-write | current | Operator for Ip fragmentation. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.5 | ColumnrcPrFilterAceIpFragRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15 | TablercPrFilterAceProtoTcpSrcPortTable | not-accessible | current | A table of Aces to store TCP Source Port information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1 | RowrcPrFilterAceProtoTcpSrcPortEntry | not-accessible | current | One entry holding Ace Protocol TCP Source Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.1 | ColumnrcPrFilterAceProtoTcpSrcPortAclId | read-only | current | An index to the AceProtoTcpSrcPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.2 | ColumnrcPrFilterAceProtoTcpSrcPortAceId | read-only | current | An index to the AceProtoTcpSrcPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.3 | ColumnrcPrFilterAceProtoTcpSrcPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.4 | ColumnrcPrFilterAceProtoTcpSrcPortCount | read-write | current | Count to store the number of discrete ranges entered for the TCP source port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.5 | ColumnrcPrFilterAceProtoTcpSrcPortOper | read-write | current | Operator for Ace Protocol TcpSrcPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.6 | ColumnrcPrFilterAceProtoTcpSrcPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16 | TablercPrFilterAceProtoUdpSrcPortTable | not-accessible | current | A table of Aces to store UDP Source Port information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1 | RowrcPrFilterAceProtoUdpSrcPortEntry | not-accessible | current | One entry holding Ace Protocol UDP Source Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.1 | ColumnrcPrFilterAceProtoUdpSrcPortAclId | read-only | current | An index to the AceProtoUdpSrcPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.2 | ColumnrcPrFilterAceProtoUdpSrcPortAceId | read-only | current | An index to the AceProtoUdpSrcPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.3 | ColumnrcPrFilterAceProtoUdpSrcPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.4 | ColumnrcPrFilterAceProtoUdpSrcPortCount | read-write | current | Count to store the number of discrete ranges entered for the UDP source port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.5 | ColumnrcPrFilterAceProtoUdpSrcPortOper | read-write | current | Operator for Ace Protocol UdpSrcPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.6 | ColumnrcPrFilterAceProtoUdpSrcPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17 | TablercPrFilterAceProtoTcpDstPortTable | not-accessible | current | A table of Aces to store TCP Dest Port information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1 | RowrcPrFilterAceProtoTcpDstPortEntry | not-accessible | current | One entry holding Ace Protocol TCP Dest Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.1 | ColumnrcPrFilterAceProtoTcpDstPortAclId | read-only | current | An index to the AceProtoTcpDstPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.2 | ColumnrcPrFilterAceProtoTcpDstPortAceId | read-only | current | An index to the AceProtoTcpDstPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.3 | ColumnrcPrFilterAceProtoTcpDstPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.4 | ColumnrcPrFilterAceProtoTcpDstPortCount | read-write | current | Count to store the number of discrete ranges entered for the TCP dest port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.5 | ColumnrcPrFilterAceProtoTcpDstPortOper | read-write | current | Operator for Ace Protocol TcpDstPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.6 | ColumnrcPrFilterAceProtoTcpDstPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18 | TablercPrFilterAceProtoUdpDstPortTable | not-accessible | current | A table of Aces to store UDP Dest Port information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1 | RowrcPrFilterAceProtoUdpDstPortEntry | not-accessible | current | One entry holding Ace Protocol UDP Dest Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.1 | ColumnrcPrFilterAceProtoUdpDstPortAclId | read-only | current | An index to the AceProtoUdpDstPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.2 | ColumnrcPrFilterAceProtoUdpDstPortAceId | read-only | current | An index to the AceProtoUdpDstPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.3 | ColumnrcPrFilterAceProtoUdpDstPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.4 | ColumnrcPrFilterAceProtoUdpDstPortCount | read-write | current | Count to store the number of discrete ranges entered for the UDP dest port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.5 | ColumnrcPrFilterAceProtoUdpDstPortOper | read-write | current | Operator for Ace Protocol UdpDstPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.6 | ColumnrcPrFilterAceProtoUdpDstPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19 | TablercPrFilterAceProtoIcmpMsgTypeTable | not-accessible | current | A table of Aces to store ICMP message type information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1 | RowrcPrFilterAceProtoIcmpMsgTypeEntry | not-accessible | current | One entry holding Ace ICMP message type information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.1 | ColumnrcPrFilterAceProtoIcmpMsgTypeAclId | read-only | current | An index to the AceProtoIcmpMsgTypeEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.2 | ColumnrcPrFilterAceProtoIcmpMsgTypeAceId | read-only | current | An index to the AceProtoIcmpMsgTypeEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.3 | ColumnrcPrFilterAceProtoIcmpMsgTypeList | read-write | current | One or a list of Icmp messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid ra… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.4 | ColumnrcPrFilterAceProtoIcmpMsgTypeCount | read-write | current | Count to store the number of discrete ranges entered for the ICMP message types. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.5 | ColumnrcPrFilterAceProtoIcmpMsgTypeOper | read-write | current | Operator for Ace Protocol IcmpMsgTypes. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.6 | ColumnrcPrFilterAceProtoIcmpMsgTypeRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20 | TablercPrFilterAceProtoTcpFlagsTable | not-accessible | current | A table of Aces to store TCP Flags information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1 | RowrcPrFilterAceProtoTcpFlagsEntry | not-accessible | current | One entry holding Ace Protocol TCP flags information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.1 | ColumnrcPrFilterAceProtoTcpFlagsAclId | read-only | current | An index to the rcPrFilterAceProtoTcpFlagsEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.2 | ColumnrcPrFilterAceProtoTcpFlagsAceId | read-only | current | An index to the rcPrFilterAceProtoTcpFlagsEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.3 | ColumnrcPrFilterAceProtoTcpFlagsList | read-write | current | One or a list of Tcp flags to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range … |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.4 | ColumnrcPrFilterAceProtoTcpFlagsCount | read-write | current | Count to store the number of discrete ranges entered for the TCP flags. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.5 | ColumnrcPrFilterAceProtoTcpFlagsOper | read-write | current | Operator for Ace Protocol TcpFlags. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.6 | ColumnrcPrFilterAceProtoTcpFlagsRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.7 | ColumnrcPrFilterAceProtoTcpFlagsOperMask | read-write | current | The mask value in hex which can be set for the rcPrFilterAceProtoTcpFlagsOper when the option selected is mask. It will be set 0x0 when object rcPrFilterAcePro… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21 | TablercPrFilterAcePattern1Table | not-accessible | current | A table of pattern fields for Aces to manage the settings for each user defined field. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1 | RowrcPrFilterAcePattern1Entry | not-accessible | current | One Ace entry holding Ace User Defined Pattern information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.1 | ColumnrcPrFilterAcePattern1AclId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.2 | ColumnrcPrFilterAcePattern1AceId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.3 | ColumnrcPrFilterAcePattern1Name | read-write | current | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.4 | ColumnrcPrFilterAcePattern1Value | read-write | current | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of str… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.5 | ColumnrcPrFilterAcePattern1Oper | read-write | current | Operators for Ace Pattern. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.6 | ColumnrcPrFilterAcePattern1RowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22 | TablercPrFilterAcePattern2Table | not-accessible | current | A table of pattern fields for Aces to manage the settings for each user defined field. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1 | RowrcPrFilterAcePattern2Entry | not-accessible | current | One Ace entry holding Ace User Defined Pattern information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.1 | ColumnrcPrFilterAcePattern2AclId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.2 | ColumnrcPrFilterAcePattern2AceId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.3 | ColumnrcPrFilterAcePattern2Name | read-write | current | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.4 | ColumnrcPrFilterAcePattern2Value | read-write | current | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of str… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.5 | ColumnrcPrFilterAcePattern2Oper | read-write | current | Operators for Ace Pattern. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.6 | ColumnrcPrFilterAcePattern2RowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23 | TablercPrFilterAcePattern3Table | not-accessible | current | A table of pattern fields for Aces to manage the settings for each user defined field. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1 | RowrcPrFilterAcePattern3Entry | not-accessible | current | One Ace entry holding Ace User Defined Pattern information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.1 | ColumnrcPrFilterAcePattern3AclId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.2 | ColumnrcPrFilterAcePattern3AceId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.3 | ColumnrcPrFilterAcePattern3Name | read-write | current | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.4 | ColumnrcPrFilterAcePattern3Value | read-write | current | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of str… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.5 | ColumnrcPrFilterAcePattern3Oper | read-write | current | Operators for Ace Pattern. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.6 | ColumnrcPrFilterAcePattern3RowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24 | TablercPrFilterAceStatsTable | not-accessible | current | A table of ACE Statistics Entries to store per-ACE-per-Port Statistics |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1 | RowrcPrFilterAceStatsEntry | not-accessible | current | Ace Statistics entry holding per-ACE-per-port Statistics |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.1 | ColumnrcPrFilterAceStatsAclId | read-only | current | An index to the AceStatsEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.2 | ColumnrcPrFilterAceStatsAceId | read-only | current | An index to the AceStatsEntry, a unique identifier for ACE entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.3 | ColumnrcPrFilterAceStatsPortId | read-only | current | An index to the AceStatsEntry, a unique identifier of the portId. This object is not being used in VSP 9000. It should be alway in VVSP 9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.4 | ColumnrcPrFilterAceStatsMatchCountPkts | read-only | current | Count of packets that match this particular Ace on this particular port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.5 | ColumnrcPrFilterAceStatsMatchCountOctets | read-only | current | Byte count of traffic that match this particular Ace on this particular port |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.6 | ColumnrcPrFilterAceStatsClear | read-write | current | Clear Per-ACE-Per-Port statistics. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25 | TablercPrFilterAceEthShowTable | not-accessible | current | A table of Aces to store Ethernet Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1 | RowrcPrFilterAceEthShowEntry | not-accessible | current | One Ace entry holding Ace Ethernet information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.1 | ColumnrcPrFilterAceEthShowAclId | read-only | current | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.2 | ColumnrcPrFilterAceEthShowAceId | read-only | current | An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.3 | ColumnrcPrFilterAceEthShowSrcAddrList | read-only | current | The list of ethernet source address to match. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.4 | ColumnrcPrFilterAceEthShowSrcAddrOper | read-only | current | Operators for Ace Ethernet Source MAC Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.5 | ColumnrcPrFilterAceEthShowDstAddrList | read-only | current | List of ethernet destination address to match. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.6 | ColumnrcPrFilterAceEthShowDstAddrOper | read-only | current | Operators for Ace Ethernet Destination MAC Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.7 | ColumnrcPrFilterAceEthShowEtherTypeList | read-only | current | EtherType value from ethernet header. For example ARP uses 0x0806, IP uses 0x0800. The platform support determines the behavior for 802.1Q/p tagged packets. Th… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.8 | ColumnrcPrFilterAceEthShowEtherTypeOper | read-only | current | Ethernet Type Operators. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.9 | ColumnrcPrFilterAceEthShowVlanTagPrio | read-only | current | Priority bits (3-bit field) from the 802.1Q/p tag. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.10 | ColumnrcPrFilterAceEthShowVlanTagPrioOper | read-only | current | Operators for Ace Ethernet Vlan Tag Priority. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.11 | ColumnrcPrFilterAceEthShowPort | read-only | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.12 | ColumnrcPrFilterAceEthShowPortOper | read-only | current | Operator for Ace Ethernet Port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.14 | ColumnrcPrFilterAceEthShowVlanIdOper | read-only | current | Operator for Ace Ethernet VlanId. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.15 | ColumnrcPrFilterAceEthShowSrcAddrOperMask | read-only | current | The mask value in hex which can be set for the rcPrFilterAceEthSrcAddrOper when the option selected is mask. It will be empty or set to 000000000000 whenrcPrFi… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.16 | ColumnrcPrFilterAceEthShowDstAddrOperMask | read-only | current | The mask value in hex which can be set for the rcPrFilterAceEthDstAddrOper when the option selected is mask. It will be empty or set to 000000000000 whenrcPrFi… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.17 | ColumnrcPrFilterAceEthShowVlanTagPrioOperMask | read-only | current | The mask value in hex which can be set for the rcPrFilterAceEthVlanTagPrioOper when the option selected is masked. This object is applicable for VSP9000. Not f… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.18 | ColumnrcPrFilterAceEthShowVlanIdOperMask | read-only | current | The mask value in hex which can be set for the rcPrFilterAceEthVlanIdOper when the option selected is mask. This object is used with rcPrFilterAceEthVlanIdVlan… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.19 | ColumnrcPrFilterAceEthShowVlanId | read-only | current | Vlan Id to match on. VSP9000 use this object with object rcPrFilterAceEthVlanIdOperMask to replace the rcPrFilterAceEthVlanIdVlanIdList |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26 | TablercPrFilterAceIpShowTable | not-accessible | current | A table of Aces to store IP Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1 | RowrcPrFilterAceIpShowEntry | not-accessible | current | One Ace entry holding Ace IP information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.1 | ColumnrcPrFilterAceIpShowAclId | read-only | current | An index to the AceIpShowEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.2 | ColumnrcPrFilterAceIpShowAceId | read-only | current | An index to the AceIpShowEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.4 | ColumnrcPrFilterAceIpShowSrcAddrOper | read-only | current | Operators for Ace Ip Source Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.6 | ColumnrcPrFilterAceIpShowDstAddrOper | read-only | current | Operators for Ace Ip Destination Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.7 | ColumnrcPrFilterAceIpShowDscpList | read-only | current | The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (li… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.8 | ColumnrcPrFilterAceIpShowDscpOper | read-only | current | Operators for Ace Ip Dscp. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.9 | ColumnrcPrFilterAceIpShowProtoList | read-only | current | Ip protocol Type from the ip header to be matched. Valid Ip protocol range is 0..255. Few of the Protocol Types are enumerated above. In case the desired proto… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.10 | ColumnrcPrFilterAceIpShowProtoOper | read-only | current | Operators for Ace Ip Protocols. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.11 | ColumnrcPrFilterAceIpShowOptions | read-only | current | Ip options to be matched from the IP Header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.12 | ColumnrcPrFilterAceIpShowOptionsOper | read-only | current | Logical Operator - only 'any' is valid at present. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.13 | ColumnrcPrFilterAceIpShowFragmentation | read-only | current | Ip Fragmentation bits to be matched from the IP Header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.14 | ColumnrcPrFilterAceIpShowFragOper | read-only | current | Operator for Ip fragmentation. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.15 | ColumnrcPrFilterAceIpShowSrcAddrIpAddr | read-only | current | IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.16 | ColumnrcPrFilterAceIpShowSrcAddrOperMaskRange | read-only | current | The IP Mask value or High IP address based on object rcPrFilterAceIpSrcAddrOper mask/range option is selected. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.17 | ColumnrcPrFilterAceIpShowDstAddrIpAddr | read-only | current | IP Source Address to match from IP header. This object is defined and used to replace the rcPrFilterAceIpSrcAddrList by VSP 9000 |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.18 | ColumnrcPrFilterAceIpShowDstAddrOperMaskRange | read-only | current | The IP mask value or Hi Ip address based on object rcPrFilterAceIpDstAddrOper mask/range option is selected. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.19 | ColumnrcPrFilterAceIpShowDscpOperMask | read-only | current | The mask value in hex which can be set for the rcPrFilterAceIpDscpOper when the option selected is mask. It will be set to 0 or be used when rcPrFilterAceIpDsc… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27 | TablercPrFilterAceProtoShowTable | not-accessible | current | A table of Aces to store Protocol Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1 | RowrcPrFilterAceProtoShowEntry | not-accessible | current | One Ace entry holding Ace Ethernet information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.1 | ColumnrcPrFilterAceProtoShowAclId | read-only | current | An index to the AceProtoShowEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.2 | ColumnrcPrFilterAceProtoShowAceId | read-only | current | An index to the AceProtoShowEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.11 | ColumnrcPrFilterAceProtoShowIcmpMsgTypeList | read-only | current | One or a list of Icmp messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid ra… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.12 | ColumnrcPrFilterAceProtoShowIcmpMsgTypeOper | read-only | current | Operator for Ace Protocol IcmpMsgTypes. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.13 | ColumnrcPrFilterAceProtoShowTcpFlagsList | read-only | current | One or a list of Tcp flags to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range … |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.14 | ColumnrcPrFilterAceProtoShowTcpFlagsOper | read-only | current | Operator for Ace Protocol TcpFlags. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.15 | ColumnrcPrFilterAceProtoShowSrcPort | read-only | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.16 | ColumnrcPrFilterAceProtoShowSrcPortOper | read-only | current | Operator for Ace Protocol SrcPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.17 | ColumnrcPrFilterAceProtoShowSrcPortOperMaskRange | read-only | current | The value should be displayed in hex when rcPrFilterAceProtoSrcPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProt… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.18 | ColumnrcPrFilterAceProtoShowDstPort | read-only | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.19 | ColumnrcPrFilterAceProtoShowDstPortOper | read-only | current | Operator for Ace Protocol DstPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.20 | ColumnrcPrFilterAceProtoShowDstPortOperMaskRange | read-only | current | The value should be displayed in hex when rcPrFilterAceProtoDstPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProt… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.21 | ColumnrcPrFilterAceProtoShowTcpFlagsOperMask | read-only | current | The mask value in hex which can be set for the rcPrFilterAceProtoTcpFlagsOper when the option selected is mask. It will be set 0x0 when object rcPrFilterAcePro… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28 | TablercPrFilterAcePatternShowTable | not-accessible | current | A table of Aces to store Pattern 1, 2, 3 Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1 | RowrcPrFilterAcePatternShowEntry | not-accessible | current | One Ace entry holding Ace Pattern 1, 2, 3 information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.1 | ColumnrcPrFilterAcePatternShowAclId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.2 | ColumnrcPrFilterAcePatternShowAceId | read-only | current | An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.3 | ColumnrcPrFilterAcePatternShowPattern1Name | read-only | current | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.4 | ColumnrcPrFilterAcePatternShowPattern1Value | read-only | current | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of str… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.5 | ColumnrcPrFilterAcePatternShowPattern1Oper | read-only | current | Operators for Ace Pattern. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.6 | ColumnrcPrFilterAcePatternShowPattern2Name | read-only | current | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.7 | ColumnrcPrFilterAcePatternShowPattern2Value | read-only | current | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of str… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.8 | ColumnrcPrFilterAcePatternShowPattern2Oper | read-only | current | Operators for Ace Pattern. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.9 | ColumnrcPrFilterAcePatternShowPattern3Name | read-only | current | A descriptive name chosen by the administrator for the Ace Pattern Entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.10 | ColumnrcPrFilterAcePatternShowPattern3Value | read-only | current | Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of str… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.11 | ColumnrcPrFilterAcePatternShowPattern3Oper | read-only | current | Operators for Ace Pattern. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29 | TablercPrFilterAceIpv6SrcAddrTable | not-accessible | current | A table of Aces to store IPv6 Source Address Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1 | RowrcPrFilterAceIpv6SrcAddrEntry | not-accessible | current | One Ace entry holding Ace IPv6 Source Address Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.1 | ColumnrcPrFilterAceIpv6SrcAddrAclId | read-only | current | An index to the AceIpv6SrcAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.2 | ColumnrcPrFilterAceIpv6SrcAddrAceId | read-only | current | An index to the AceIpv6SrcAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.3 | ColumnrcPrFilterAceIpv6SrcAddrList | read-write | current | The list of ipv6 source address to match from IPv6 header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.4 | ColumnrcPrFilterAceIpv6SrcAddrListCount | read-write | current | Count to store the number of discrete ranges entered for the ipv6 src address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.5 | ColumnrcPrFilterAceIpv6SrcAddrOper | read-write | current | Operators for Ace Ipv6 Source Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.6 | ColumnrcPrFilterAceIpv6SrcAddrRowStatus | read-create | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30 | TablercPrFilterAceIpv6DstAddrTable | not-accessible | current | A table of Aces to store IPv6 Destination Address Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1 | RowrcPrFilterAceIpv6DstAddrEntry | not-accessible | current | One Ace entry holding Ace IPv6 Destination Address Header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.1 | ColumnrcPrFilterAceIpv6DstAddrAclId | read-only | current | An index to the AceIpv6DstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.2 | ColumnrcPrFilterAceIpv6DstAddrAceId | read-only | current | An index to the AceIpv6DstAddrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.3 | ColumnrcPrFilterAceIpv6DstAddrList | read-write | current | The list of ipv6 dst address to match from IPv6 header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.4 | ColumnrcPrFilterAceIpv6DstAddrListCount | read-write | current | Count to store the number of discrete ranges entered for the IPv6 Destination Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.5 | ColumnrcPrFilterAceIpv6DstAddrOper | read-write | current | Operators for Ace IPv6 Destination Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.6 | ColumnrcPrFilterAceIpv6DstAddrRowStatus | read-create | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31 | TablercPrFilterAceIpv6NextHdrTable | not-accessible | current | A table of Aces to store IPv6 Next header Header information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1 | RowrcPrFilterAceIpv6NextHdrEntry | not-accessible | current | One Ace entry holding Ace IPv6 Next header information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.1 | ColumnrcPrFilterAceIpv6NextHdrAclId | read-only | current | An index to the AceIpv6NextHdrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.2 | ColumnrcPrFilterAceIpv6NextHdrAceId | read-only | current | An index to the AceIpv6NextHdrEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.3 | ColumnrcPrFilterAceIpv6NextHdrNextHdr | read-write | current | The ipv6 next header to look for. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.4 | ColumnrcPrFilterAceIpv6NextHdrOper | read-write | current | Operators for Ace IPv6 Next header. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.5 | ColumnrcPrFilterAceIpv6NextHdrRowStatus | read-create | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32 | TablercPrFilterAceIpv6ShowTable | not-accessible | current | A table of Aces to display ipv6 information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1 | RowrcPrFilterAceIpv6ShowEntry | not-accessible | current | One Ace entry holding Ace ipv6 information. Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.1 | ColumnrcPrFilterAceIpv6ShowAclId | read-only | current | An index to the AceIpv6Entry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.2 | ColumnrcPrFilterAceIpv6ShowAceId | read-only | current | An index to the AceIpv6Entry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.3 | ColumnrcPrFilterAceIpv6ShowSrcAddrList | read-only | current | The list of v6 source address to display. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.4 | ColumnrcPrFilterAceIpv6ShowSrcAddrOper | read-only | current | Operators for Ace v6 Source Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.5 | ColumnrcPrFilterAceIpv6ShowDstAddrList | read-only | current | List of v6 destination address to display. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.6 | ColumnrcPrFilterAceIpv6ShowDstAddrOper | read-only | current | Operators for Ace v6 Destination Address. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.7 | ColumnrcPrFilterAceIpv6ShowNxtHdrNxtHdr | read-only | current | v6 next hdr to display. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.8 | ColumnrcPrFilterAceIpv6ShowNxtHdrOper | read-only | current | Operator for Ace v6 next hdr. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33 | TablercPrFilterAceProtoSrcPortTable | not-accessible | current | A table of Aces to store TCP/UDP Source Port information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1 | RowrcPrFilterAceProtoSrcPortEntry | not-accessible | current | One entry holding Ace Protocol TCP/UDP Source Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.1 | ColumnrcPrFilterAceProtoSrcPortAclId | read-only | current | An index to the AceProtoSrcPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.2 | ColumnrcPrFilterAceProtoSrcPortAceId | read-only | current | An index to the AceProtoSrcPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.3 | ColumnrcPrFilterAceProtoSrcPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.4 | ColumnrcPrFilterAceProtoSrcPortCount | read-write | current | Count to store the number of discrete ranges entered for the TCP source port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.5 | ColumnrcPrFilterAceProtoSrcPortOper | read-write | current | Operator for Ace Protocol SrcPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.6 | ColumnrcPrFilterAceProtoSrcPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.33.1.7 | ColumnrcPrFilterAceProtoSrcPortOperMaskRange | read-write | current | The value should be displayed in hex when rcPrFilterAceProtoSrcPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProt… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34 | TablercPrFilterAceProtoDstPortTable | not-accessible | current | A table of Aces to store TCP Dest Port information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1 | RowrcPrFilterAceProtoDstPortEntry | not-accessible | current | One entry holding Ace Protocol TCP Dest Port information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.1 | ColumnrcPrFilterAceProtoDstPortAclId | read-only | current | An index to the AceProtoDstPortEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.2 | ColumnrcPrFilterAceProtoDstPortAceId | read-only | current | An index to the AceProtoDstPortEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.3 | ColumnrcPrFilterAceProtoDstPortPort | read-write | current | Port Number or Port List to match on. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.4 | ColumnrcPrFilterAceProtoDstPortCount | read-write | current | Count to store the number of discrete ranges entered for the TCP dest port. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.5 | ColumnrcPrFilterAceProtoDstPortOper | read-write | current | Operator for Ace Protocol DstPort. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.6 | ColumnrcPrFilterAceProtoDstPortRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.34.1.7 | ColumnrcPrFilterAceProtoDstPortOperMaskRange | read-write | current | The value should be displayed in hex when rcPrFilterAceProtoDstPortOper is set to 'mask'. This object will be used as a Range high value when rcPrFilterAceProt… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35 | TablercPrFilterAceProtoTcpOptionTable | not-accessible | current | A table of Aces to store TCP Option information of each Ace in context of its parent Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1 | RowrcPrFilterAceProtoTcpOptionEntry | not-accessible | current | One entry holding Ace Protocol TCP option information. An Ace is a member of one Acl. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.1 | ColumnrcPrFilterAceProtoTcpOptionAclId | read-only | current | An index to the rcPrFilterAceProtoTcpOptionEntry, a unique identifier for Acl entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.2 | ColumnrcPrFilterAceProtoTcpOptionAceId | read-only | current | An index to the rcPrFilterAceProtoTcpOptionEntry, a unique identifier for Ace entry in the range of Table Size. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.3 | ColumnrcPrFilterAceProtoTcpOptionHeader | read-write | current | TCP options to be matched from the TCP Header. 1 No-Operation 2 MaximumSegmentSize 3 WSOPT - Window Scale 4 SACK Permitted 5 SACK 8 TSOPT - Time Stamp Option 9… |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.4 | ColumnrcPrFilterAceProtoTcpOptionOper | read-write | current | Logical Operator - only 'any' is valid at present. |
| 1.3.6.1.4.1.2272.1.202.1.1.2.4.35.1.5 | ColumnrcPrFilterAceProtoTcpOptionRowStatus | read-write | current | Create/delete operations for this entry. |
| 1.3.6.1.4.1.2272.1.203 | NodercVrf | |||
| 1.3.6.1.4.1.2272.1.203.1 | NodercVrfMib | |||
| 1.3.6.1.4.1.2272.1.203.1.0 | NodercVrfNotifications | |||
| 1.3.6.1.4.1.2272.1.203.1.1 | NodercVrfObjects | |||
| 1.3.6.1.4.1.2272.1.203.1.1.1 | NodercVrfConfig | |||
| 1.3.6.1.4.1.2272.1.203.1.1.1.1 | NodercVrfConfigScalars | |||
| 1.3.6.1.4.1.2272.1.203.1.1.1.1.1 | ScalarrcVrfConfigNextAvailableVrfId | read-only | current | The next available Virtual Router Id (index). This object provides a hint for the rcVrfId value to use when administratively creating a new rcVrfConfigEntry. A… |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2 | TablercVrfConfigTable | not-accessible | current | This table is for creating the new Virtual Routers. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1 | RowrcVrfConfigEntry | not-accessible | current | The entries in this table can be added/deleted using the rcVrfRowStatus. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.1 | ColumnrcVrfId | not-accessible | current | The unique id of this virtual router instance. A Virtual Router cannot not be created with rcVrfId = 0. VRFID 0 is reserved for the Administrative VRF. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.2 | ColumnrcVrfRowStatus | read-create | current | The status column has three defined values: - `active', which indicates that the conceptual row is available for use by the managed device; - `createAndGo', wh… |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.3 | ColumnrcVrfName | read-write | current | The Name of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.4 | ColumnrcVrfContextName | read-create | current | The SNMPv2 Community String or SNMPv3 contextName denotes the VRF 'context' and is used to logically separate the MIB module management. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.5 | ColumnrcVrfTrapEnable | read-create | current | This objects is used to enable the generation of the VrfUp and VrfDown traps. true(1) - VRF Traps Enabled false(2) - VRF Traps Disabled |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.6 | ColumnrcVrfMaxRoutes | read-create | current | This object specifies the maximum number of routes that this VRF can support. The default value is 10000. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.7 | ColumnrcVrfAdminStatus | read-create | current | The administrative state of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.8 | ColumnrcVrfVpnId | read-create | current | The Virtual Private Network Identifier of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.9 | ColumnrcVrfRpTrigger | read-create | current | This object represents Routing Protocol (RP) Triggers on a Virtual Router and it meant to be used to initiate or shutdown routing protocols on a VRF. Multiple … |
| 1.3.6.1.4.1.2272.1.203.1.1.1.2.1.10 | ColumnrcVrfMaxRoutesTrapEnable | read-create | current | This objects is used to enable the generation of the VRF Max Routes Exceeded traps. true(1) - VRF Max Routes Exceeded Traps Enabled false(2) - VRF Max Routes E… |
| 1.3.6.1.4.1.2272.1.203.1.1.2 | NodercVrfStat | |||
| 1.3.6.1.4.1.2272.1.203.1.1.2.1 | NodercVrfStatScalars | |||
| 1.3.6.1.4.1.2272.1.203.1.1.2.1.1 | ScalarrcVrfConfiguredVRFs | read-only | current | The number of VRFs configured on this network element. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.1.2 | ScalarrcVrfActiveVRFs | read-only | current | The number of VRFs that are active on the network element. These are VRFs for which the rcVrfStatOperStatus = up(1) |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2 | TablercVrfStatTable | not-accessible | current | This table contains statistics for the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1 | RowrcVrfStatEntry | not-accessible | current | Entries in this table are per rcVrfId. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.1 | ColumnrcVrfStatRouteEntries | read-only | current | Total number of routes for this VRF. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.2 | ColumnrcVrfStatFIBEntries | read-only | current | Total number of FIB Entries for this VRF. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.3 | ColumnrcVrfStatUpTime | read-only | current | The time in (in hundredths of a second) since this VRF entry has been operational. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.4 | ColumnrcVrfOperStatus | read-only | current | The operational status of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.5 | ColumnrcVrfRpStatus | read-only | current | This object represents the status of Routing Protocols on this VRF corresponding to the list of RP specified in rcVrfRpTrigger. The BITS represent an Action-co… |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.6 | ColumnrcVrfRouterAddressType | read-only | current | Router Address Type of this VRF. |
| 1.3.6.1.4.1.2272.1.203.1.1.2.2.1.7 | ColumnrcVrfRouterAddress | read-only | current | Router Address of this VRF. It is derived from one of the interfaces. If loopback interface is present, the loopback interface address can be used. However, lo… |
| 1.3.6.1.4.1.2272.1.203.1.1.3 | ScalarrcVrfIpVpnTableSize | read-only | current | Size of Vrf IpVpn Table |
| 1.3.6.1.4.1.2272.1.203.1.1.4 | TablercVrfIpVpnTable | not-accessible | current | Table required to configure vpn under ip. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1 | RowrcVrfIpVpnTableEntry | not-accessible | current | Entries in this table are per rcVrfId. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.1 | ColumnrcVrfIpVpnVrfId | not-accessible | current | The VrfId serves as the Index for the rcIpVpnVrfTable and also for the rcIpVpnRouteDistinguisherTable. It allows to connect to the vrf table to obtain other at… |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.2 | ColumnrcVrfIpVpnStatus | read-create | current | The status of IpVpn. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.3 | ColumnrcVrfIpVpnImportRTList | read-create | current | The Import RT list is a list of all the route-targets attached to a particular vrf behaving in the import mode. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.4 | ColumnrcVrfIpVpnExportRTList | read-create | current | The Export RT list is a list of all the route-targets attached to a particular vrf in the export mode. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.5 | ColumnrcVrfIpVpnSvcLblAllocOpt | read-create | current | The service label allocation option for the ipvpn |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.6 | ColumnrcVrfIpVpnRowStatus | read-create | current | RowStatus for the Vpn Entry. |
| 1.3.6.1.4.1.2272.1.203.1.1.4.1.7 | ColumnrcVrfIpVpnIsidNumber | read-create | current | IP VPN I-SID number.Default 0 value indicates that no i-sid has been assinged. |
| 1.3.6.1.4.1.2272.1.203.1.1.5 | TablercVrfNameTable | not-accessible | current | This table is for EDM and SNMP agent to get source vrf name for inter-vrf route redistribute. |
| 1.3.6.1.4.1.2272.1.203.1.1.5.1 | RowrcVrfNameEntry | not-accessible | current | Each entry has the vrfid and name for source vrf needed by inter-vrf route redistribute. |
| 1.3.6.1.4.1.2272.1.203.1.1.5.1.1 | ColumnrcVrfNameVrfId | not-accessible | current | The unique id of this virtual router instance. |
| 1.3.6.1.4.1.2272.1.203.1.1.5.1.2 | ColumnrcVrfNameVrfName | read-only | current | The Name of the Virtual Router. |
| 1.3.6.1.4.1.2272.1.203.1.2 | NodercVrfNotificationObjects | |||
| 1.3.6.1.4.1.2272.1.204 | NodercCobaltBlue | |||
| 1.3.6.1.4.1.2272.1.204.1 | NodercCobaltBlueMib | |||
| 1.3.6.1.4.1.2272.1.204.1.0 | NodercCbNotifications | |||
| 1.3.6.1.4.1.2272.1.204.1.0.1 | ScalarrcLoginUserName | accessible-for-notify | current | Used to inidcation the login user name for notification |
| 1.3.6.1.4.1.2272.1.204.1.0.2 | ScalarrcLoginHostIpAddress | accessible-for-notify | current | Used to inidcation the login host ip address for notification |
| 1.3.6.1.4.1.2272.1.204.1.0.3 | ScalarrcSlotType | accessible-for-notify | current | Used to inidcate the slot type |
| 1.3.6.1.4.1.2272.1.204.1.0.4 | ScalarrcFanZoneType | accessible-for-notify | current | Type of the fan zone. |
| 1.3.6.1.4.1.2272.1.204.1.0.5 | ScalarrcFanTrayId | accessible-for-notify | current | Fan tray number in the fan zone |
| 1.3.6.1.4.1.2272.1.204.1.0.6 | ScalarrcFanUnitId | accessible-for-notify | current | Fan unit number in the fan tray |
| 1.3.6.1.4.1.2272.1.204.1.0.7 | ScalarrcCardTemp | accessible-for-notify | current | Used to inidcate the card temperature |
| 1.3.6.1.4.1.2272.1.204.1.0.8 | ScalarrcCpuUtilization | accessible-for-notify | current | Used to inidcate the CPU utilization |
| 1.3.6.1.4.1.2272.1.204.1.0.9 | ScalarrcLoginHostAddressType | accessible-for-notify | current | Used to inidcation the login host address type for notification |
| 1.3.6.1.4.1.2272.1.204.1.0.10 | ScalarrcLoginHostInetAddress | accessible-for-notify | current | Used to inidcation the login host inet address for notification |
| 1.3.6.1.4.1.2272.1.204.1.1 | NodercCbObjects | |||
| 1.3.6.1.4.1.2272.1.204.1.1.1 | NodercCbSwitchFabric | |||
| 1.3.6.1.4.1.2272.1.204.1.1.1.1 | NodercCbSwitchFabricScalars | |||
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1 | NodercCbSwitchFabricStats | |||
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.1 | ScalarrcCbSwitchFabricDropPrec1AcceptedPackets | read-only | current | Accepted number of packets from drop precedence 1. The drop precedence is a function of the front end policer. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.2 | ScalarrcCbSwitchFabricDropPrec1AcceptedBytes | read-only | current | Accepted number of bytes from drop precedence 1 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.3 | ScalarrcCbSwitchFabricDropPrec1CongestionMarkedPackets | read-only | current | Congestion marked number of packets from drop precedence 1. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.4 | ScalarrcCbSwitchFabricDropPrec1CongestionMarkedBytes | read-only | current | Congestion marked number of bytes from drop precedence 1. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.5 | ScalarrcCbSwitchFabricDropPrec1DiscardDroppedPackets | read-only | current | WRED dropped number of packets from drop precedence 1. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.6 | ScalarrcCbSwitchFabricDropPrec1DiscardDroppedBytes | read-only | current | WRED dropped number of bytes from drop precedence 1. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.7 | ScalarrcCbSwitchFabricDropPrec2AcceptedPackets | read-only | current | Accepted number of packets from drop precedence 2 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.8 | ScalarrcCbSwitchFabricDropPrec2AcceptedBytes | read-only | current | Accepted number of bytes from drop precedence 2 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.9 | ScalarrcCbSwitchFabricDropPrec2CongestionMarkedPackets | read-only | current | Congestion marked number of packets from drop precedence 2. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.10 | ScalarrcCbSwitchFabricDropPrec2CongestionMarkedBytes | read-only | current | Congestion marked number of bytes from drop precedence 2. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.11 | ScalarrcCbSwitchFabricDropPrec2DiscardDroppedPackets | read-only | current | WRED dropped number of packets from drop precedence 2. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.12 | ScalarrcCbSwitchFabricDropPrec2DiscardDroppedBytes | read-only | current | WRED dropped number of bytes from drop precedence 2. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.13 | ScalarrcCbSwitchFabricDropPrec3AcceptedPackets | read-only | current | Accepted number of packets from drop precedence 3 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.14 | ScalarrcCbSwitchFabricDropPrec3AcceptedBytes | read-only | current | Accepted number of bytes from drop precedence 3 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.15 | ScalarrcCbSwitchFabricDropPrec3CongestionMarkedPackets | read-only | current | Congestion marked number of packets from drop precedence 3. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.16 | ScalarrcCbSwitchFabricDropPrec3CongestionMarkedBytes | read-only | current | Congestion marked number of bytes from drop precedence 3. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.17 | ScalarrcCbSwitchFabricDropPrec3DiscardDroppedPackets | read-only | current | WRED dropped number of packets from drop precedence 3. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.18 | ScalarrcCbSwitchFabricDropPrec3DiscardDroppedBytes | read-only | current | WRED dropped number of bytes from drop precedence 3. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.19 | ScalarrcCbSwitchFabricDropPrec4AcceptedPackets | read-only | current | Accepted number of packets from drop precedence 4 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.20 | ScalarrcCbSwitchFabricDropPrec4AcceptedBytes | read-only | current | Accepted number of bytes from drop precedence 4 |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.21 | ScalarrcCbSwitchFabricNonWredDroppedPackets | read-only | current | Dropped packets due to non Random Early Detection |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.22 | ScalarrcCbSwitchFabricNonWredDroppedBytes | read-only | current | Dropped packets bytes due to non Random Early Detection |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.23 | ScalarrcCbSwitchFabricDequeuedPackets | read-only | current | Packets dequeued once inside the switch fabric |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.24 | ScalarrcCbSwitchFabricDequeuedBytes | read-only | current | Packets bytes dequeued once inside the switch fabric |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.25 | ScalarrcCbSwitchFabricDropPrec1DroppedPackets | read-only | current | non-WRED dropped number of packets from drop precedence 1. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.26 | ScalarrcCbSwitchFabricDropPrec1DroppedBytes | read-only | current | non-WRED dropped number of bytes from drop precedence 1. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.27 | ScalarrcCbSwitchFabricDropPrec2DroppedPackets | read-only | current | non-WRED dropped number of packets from drop precedence 2. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.28 | ScalarrcCbSwitchFabricDropPrec2DroppedBytes | read-only | current | non-WRED dropped number of bytes from drop precedence 2. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.29 | ScalarrcCbSwitchFabricDropPrec3DroppedPackets | read-only | current | non-WRED dropped number of packets from drop precedence 3. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.30 | ScalarrcCbSwitchFabricDropPrec3DroppedBytes | read-only | current | non-WRED dropped number of bytes from drop precedence 3. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.31 | ScalarrcCbSwitchFabricDropPrec4CongestionMarkedPackets | read-only | current | Congestion marked number of packets from drop precedence 4. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.32 | ScalarrcCbSwitchFabricDropPrec4CongestionMarkedBytes | read-only | current | Congestion marked number of bytes from drop precedence 4. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.33 | ScalarrcCbSwitchFabricDropPrec4DiscardDroppedPackets | read-only | current | WRED dropped number of packets from drop precedence 4. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.34 | ScalarrcCbSwitchFabricDropPrec4DiscardDroppedBytes | read-only | current | WRED dropped number of bytes from drop precedence 4. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.35 | ScalarrcCbSwitchFabricDropPrec4DroppedPackets | read-only | current | non-WRED dropped number of packets from drop precedence 4. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.36 | ScalarrcCbSwitchFabricDropPrec4DroppedBytes | read-only | current | non-WRED dropped number of bytes from drop precedence 4. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.37 | ScalarrcCbSwitchFabricOverSubscribeTotalDroppedPkts | read-only | current | Dropped number of packets due to free list underflow. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.38 | ScalarrcCbSwitchFabricOverSubscribeTotalDroppedBytes | read-only | current | Dropped number of bytes due to free list underflow. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.39 | ScalarrcCbSwitchFabricOverSubscribeGuaranteeDroppedPkts | read-only | current | Dropped number of packets Gbl buf thres guarantee. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.40 | ScalarrcCbSwitchFabricOverSubscribeGuaranteeDroppedBytes | read-only | current | Dropped number of bytes Gbl buf thres guarantee. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.41 | ScalarrcCbSwitchFabricOutPkts | read-only | current | Number of packets out from egress interface. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.1.42 | ScalarrcCbSwitchFabricOutBytes | read-only | current | Number of bytes out from egress interface. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.2 | ScalarrcCbSwitchFabricStatsCapture | read-write | current | Control to turn stats collection on or off |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.3 | ScalarrcCbSwitchFabricStatsPortId | read-write | current | The port on which stats is to be collected on. Must select a data port. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.4 | ScalarrcCbSwitchFabricStatsCosId | read-write | current | The CoS or VOQ to collect Stats on |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.5 | ScalarrcCbBmeActiveBme | read-only | current | The location of the active BME in the system. BME stands for Bandwidth Manager Engine. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.6 | ScalarrcCbBmeRedundancyMode | read-only | current | Redundancy mode for BMEs. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.7 | ScalarrcCbProfileType | read-write | current | Switch fabric profile type. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.1.8 | ScalarrcCbSwitchFabricDeviceRead | read-write | current | If turned on statistics for switch fabric counters are collected directly from devices. Otherwise, a cached copy is returned. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.2 | TablercCbQueuingEngine2kTable | not-accessible | current | Table containing the 2k based queuing engine entries for the system. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.2.1 | RowrcCbQueuingEngine2kEntry | not-accessible | current | Entry for the QE Table |
| 1.3.6.1.4.1.2272.1.204.1.1.1.2.1.1 | ColumnrcCbQueuingEngine2kId | not-accessible | current | Index for an entry in the QE Table. Here is the layout of the IDs in relation to the system: Location ID(s) IO on slot 3: 1..3 IO on slot 4: 4..6 CP on slot 1:… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.2.1.2 | ColumnrcCbQueuingEngine2kStatus | read-only | current | Status of a given QE interface. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.3 | TablercCbSwitchingEngine4kTable | not-accessible | current | Table containing the 4k based switching engine entries for the system. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.3.1 | RowrcCbSwitchingEngine4kEntry | not-accessible | current | Entry for the SE Table. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.3.1.1 | ColumnrcCbSwitchingEngine4kId | not-accessible | current | Index for the SE Table. Here is the layout of the IDs in relation to the system: Location ID(s) SF on slot 13: 1..3 SF on slot 14: 4..6 ... SF on slot 18: 16..… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.3.1.2 | ColumnrcCbSwitchingEngine4kStatus | read-only | current | Status of a given SE Device. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.4 | TablercCbSwitchingEngine9600Table | not-accessible | current | Table containing the 9600 based switching engine entries for the system. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.4.1 | RowrcCbSwitchingEngine9600Entry | not-accessible | current | Entry for the SE 9600 Table. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.4.1.1 | ColumnrcCbSwitchingEngine9600Id | not-accessible | current | Index for the SE Table. Here is the layout of the IDs in relation to the system: Location ID(s) SF on slot 21: 1..2 SF on slot 22: 3..4 ... SF on slot 26: 11..… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.4.1.2 | ColumnrcCbSwitchingEngine9600Status | read-only | current | Status of a given Fast SE Device. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.4.1.3 | ColumnrcCbSwitchingEngine9600Mode | read-only | current | Mode of given Fast SE Device either BME or SE. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5 | TablercCbQe2kSerdesLinkTable | not-accessible | current | Table containing the Serdes Link Information for the system. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5.1 | RowrcCbQe2kSerdesLinkEntry | not-accessible | current | Entry for a QE based Serdes Link Interface. The combination of the QE ID and Serdes Link ID uniquely identifies a link. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.1 | ColumnrcCbQe2kSerdesLinkId | not-accessible | current | This ID maps to a particular serdes port number for the identified device. Here's the mapping: rcCbQe2kSerdesLinkId 1 = port 0; Slot 3; QE Device 1 ... rcCbQe2… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.2 | ColumnrcCbQe2kSerdesLinkType | read-only | current | Link type of the serdes interface |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.3 | ColumnrcCbQe2kSerdesLinkStatus | read-only | current | Interface Status |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.4 | ColumnrcCbQe2kSerdesLinkConnectedToDevice | read-only | current | The SE/BME ID to which the QE2k ID is attached to. Note that IDs 16 & 18 are unused. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.5.1.5 | ColumnrcCbQe2kSerdesLinkConnectedToSlot | read-only | current | The slot number of the switch fabric card to which the QE2k ID is attached to. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6 | TablercCbSESerdesLinkTable | not-accessible | current | Table containing the Serdes Link Information for the system. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6.1 | RowrcCbSESerdesLinkEntry | not-accessible | current | Entry for an SE based Serdes Link Interface. The combination of the QE ID and Serdes Link ID uniquely identifies a link. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.1 | ColumnrcCbSESerdesLinkId | not-accessible | current | This ID maps to a particular serdes port number for the identified device. Here's the mapping: SESerdesLinkId 1 = port 0; Slot 21; Device 1 SESerdesLinkId 33 =… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.2 | ColumnrcCbSESerdesLinkType | read-only | current | Link Type of the Serdes interface. Switch control interface is sci. Switch forwarding interface is sfi. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.3 | ColumnrcCbSESerdesLinkStatus | read-only | current | Interface Status |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.4 | ColumnrcCbSESerdesLinkConnectedToDevice | read-only | current | The QE2k ID to which the SE/BME ID is attached to. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.6.1.5 | ColumnrcCbSESerdesLinkConnectedToSlot | read-only | current | The slot number of the switch fabric card to which the QE2k ID is attached to. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7 | TablercCbSE9600SerdesLinkTable | not-accessible | current | Table containing the Fast Serdes Link Information for the system. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7.1 | RowrcCbSE9600SerdesLinkEntry | not-accessible | current | Entry for an SE based Serdes Link Interface. The combination of the QE ID and Serdes Link ID uniquely identifies a link. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.1 | ColumnrcCbSE9600SerdesLinkId | not-accessible | current | This ID maps to a particular serdes port number for the identified device. Here's the mapping: SESerdesLinkId 1 = port 0; Slot 21; Device 1 SESerdesLinkId 97 =… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.2 | ColumnrcCbSE9600SerdesLinkType | read-only | current | Link Type of the Serdes interface. Switch control interface is sci. Switch forwarding interface is sfi. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.3 | ColumnrcCbSE9600SerdesLinkStatus | read-only | current | Interface Status |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.4 | ColumnrcCbSE9600SerdesLinkConnectedToDevice | read-only | current | The QE2k ID to which the SE/BME ID is attached to. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.7.1.5 | ColumnrcCbSE9600SerdesLinkConnectedToSlot | read-only | current | The slot number of the switch fabric card to which the QE2k ID is attached to. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.8 | TablercCbSPITable | not-accessible | obsolete | Table containing the system peripheral interface info. |
| 1.3.6.1.4.1.2272.1.204.1.1.1.8.1 | RowrcCbSPIEntry | not-accessible | obsolete | SPI table entry |
| 1.3.6.1.4.1.2272.1.204.1.1.1.8.1.1 | ColumnrcCbSPIId | not-accessible | obsolete | The Index for the SPI Table. Here is the layout of the IDs in relation to the system: Location ID(s) Slot 1: 1..6 Slot 2: 7..12 ... Slot 12: 57..72 Current imp… |
| 1.3.6.1.4.1.2272.1.204.1.1.1.8.1.2 | ColumnrcCbSPIStatus | read-only | obsolete | SPI Status |
| 1.3.6.1.4.1.2272.1.206 | NodercVrrpv3 | |||
| 1.3.6.1.4.1.2272.1.206.1 | NodercVrrpTmpMib | |||
| 1.3.6.1.4.1.2272.1.206.1.0 | NodercVrrpTmpNotifications | |||
| 1.3.6.1.4.1.2272.1.206.1.0.1 | NotificationrcVrrpTmpTrapNewMaster | current | The newMaster trap indicates that the sending agent has transitioned to 'Master' state. | |
| 1.3.6.1.4.1.2272.1.206.1.0.3 | NotificationrcVrrpTmpTrapProtoError | current | The error trap indicates that the sending agent has encountered the protocol error indicated by rcVrrpTmpTrapProtoErrorReason. | |
| 1.3.6.1.4.1.2272.1.206.1.1 | NodercVrrpTmpOperations | |||
| 1.3.6.1.4.1.2272.1.206.1.1.2 | ScalarrcVrrpTmpNotificationCntl | read-write | current | Indicates whether the VRRP-enabled router will generate SNMP notifications for events defined in this MIB. 'Enabled' results in SNMP notifications; 'disabled',… |
| 1.3.6.1.4.1.2272.1.206.1.1.7 | TablercVrrpTmpOperationsTable | not-accessible | current | Unified Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'rcVrrpTmpOperationsEntry' items which describe … |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1 | RowrcVrrpTmpOperationsEntry | not-accessible | current | An entry in the rcVrrpTmpOperationsTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.1 | ColumnrcVrrpTmpOperationsIfIndex | not-accessible | current | port interface index. |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.2 | ColumnrcVrrpTmpOperationsInetAddrType | not-accessible | current | The IP address type of RcVrrpTmpOperationsEntry. This value applies to both rcVrrpTmpOperationsMasterIpAddr and rcVrrpTmpOperationsPrimaryIpAddr. |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.3 | ColumnrcVrrpTmpOperationsVrId | not-accessible | current | This object contains the Virtual Router Identifier (VRID). |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.4 | ColumnrcVrrpTmpOperationsVirtualMacAddr | read-only | current | The virtual MAC address of the virtual router. Although this object can be derived from the 'rcVrrpTmpOperationsVrId' object, it is defined so that it is easil… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.5 | ColumnrcVrrpTmpOperationsState | read-only | current | The current state of the virtual router. This object has three defined values: - `initialize', which indicates that the virtual router is waiting for a startup… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.6 | ColumnrcVrrpTmpOperationsPriority | read-create | current | This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although … |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.7 | ColumnrcVrrpTmpOperationsAddrCount | read-only | current | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the rcVrrpTmpAssociatedAddrTable that co… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.8 | ColumnrcVrrpTmpOperationsMasterIpAddr | read-only | current | The master router's real IP address. Master router would set this address to rcVrrpTmpOperationsPrimaryIpAddr while transitioning to master state. For backup r… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.9 | ColumnrcVrrpTmpOperationsPrimaryIpAddr | read-create | current | In the case where there are more than one IP Address (associated IP addresses) for a given `ifIndex', this object is used to specify the IP address that will b… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.10 | ColumnrcVrrpTmpOperationsAdvInterval | read-create | current | The time interval between sending advertisement messages. Only the master router sends VRRP advertisements. It is configured in seconds, but it is converted in… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.11 | ColumnrcVrrpTmpOperationsPreemptMode | read-create | current | Controls whether a higher priority virtual router will preempt a lower priority master. |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.12 | ColumnrcVrrpTmpOperationsAcceptMode | read-create | current | Controls whether a virtual router in Master state will accept packets addressed to the address owner's IPv6 address as its own if it is not the IPv6 address ow… |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.13 | ColumnrcVrrpTmpOperationsUpTime | read-only | current | This is the value of the `sysUpTime' object when this virtual router (i.e., the `rcVrrpTmpOperationsState') transitioned out of `initialized'. |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.14 | ColumnrcVrrpTmpOperationsStorageType | read-create | current | The storage type for this conceptual row. Write access is not required. It is optional to support nonVolatile StorageType enumeration. |
| 1.3.6.1.4.1.2272.1.206.1.1.7.1.15 | ColumnrcVrrpTmpOperationsRowStatus | read-create | current | The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. When `rcVrrpTmpOperationsRowStatus' is set to … |
| 1.3.6.1.4.1.2272.1.206.1.1.8 | TablercVrrpTmpAssociatedIpAddrTable | not-accessible | current | The table of addresses associated with this virtual router. |
| 1.3.6.1.4.1.2272.1.206.1.1.8.1 | RowrcVrrpTmpAssociatedIpAddrEntry | not-accessible | current | An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given IP version, VrID and ifIndex will equal t… |
| 1.3.6.1.4.1.2272.1.206.1.1.8.1.1 | ColumnrcVrrpTmpAssociatedIpAddr | not-accessible | current | The assigned IP addresses that a virtual router is responsible for backing up. The size of this object is either 4 or 16 depending on rcVrrpTmpOperationsInetAd… |
| 1.3.6.1.4.1.2272.1.206.1.1.8.1.2 | ColumnrcVrrpTmpAssociatedIpAddrPrefixLength | not-accessible | current | The length of the prefix (in bits). |
| 1.3.6.1.4.1.2272.1.206.1.1.8.1.3 | ColumnrcVrrpTmpAssociatedStorageType | read-create | current | The storage type for this conceptual row. Write access is not required. It is optional to support nonVolatile StorageType enumeration. |
| 1.3.6.1.4.1.2272.1.206.1.1.8.1.4 | ColumnrcVrrpTmpAssociatedIpAddrRowStatus | read-create | current | The RowStatus variable, used according to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object t… |
| 1.3.6.1.4.1.2272.1.206.1.1.9 | ScalarrcVrrpTmpNewMasterReason | read-only | current | This indicates the reason for rcVrrpTmpNewMaster trap. Used by rcVrrpTmpTrapNewMaster trap. The object can be polled if the rcVrrpTmpNewMaster trap is lost to … |
| 1.3.6.1.4.1.2272.1.206.1.1.10 | ScalarrcVrrpTmpTrapProtoErrReason | accessible-for-notify | current | This indicates the reason for protocol error trap. Used by rcVrrpTmpTrapProtoError trap. |
| 1.3.6.1.4.1.2272.1.206.1.2 | NodercVrrpTmpStatistics | |||
| 1.3.6.1.4.1.2272.1.206.1.2.1 | ScalarrcVrrpTmpRouterChecksumErrors | read-only | current | The total number of VRRP packets received with an invalid VRRP checksum value. |
| 1.3.6.1.4.1.2272.1.206.1.2.2 | ScalarrcVrrpTmpRouterVersionErrors | read-only | current | The total number of VRRP packets received with an unknown or unsupported version number. |
| 1.3.6.1.4.1.2272.1.206.1.2.3 | ScalarrcVrrpTmpRouterVrIdErrors | read-only | current | The total number of VRRP packets received with an invalid VRID for this virtual router. |
| 1.3.6.1.4.1.2272.1.206.1.2.5 | TablercVrrpTmpRouterStatisticsTable | not-accessible | current | Table of virtual router statistics. |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1 | RowrcVrrpTmpRouterStatisticsEntry | not-accessible | current | An entry in the table, containing statistics information about a given virtual router. |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.1 | ColumnrcVrrpTmpStatisticsMasterTransitions | read-only | current | The total number of times that this virtual router's state has transitioned to MASTER. Discontinuities in the value of this counter can occur at re-initializat… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.2 | ColumnrcVrrpTmpStatisticsRcvdAdvertisements | read-only | current | The total number of VRRP advertisements received by this virtual router. Discontinuities in the value of this counter can occur at re-initialization of the man… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.3 | ColumnrcVrrpTmpStatisticsAdvIntervalErrors | read-only | current | The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router.… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.4 | ColumnrcVrrpTmpStatisticsIpTtlErrors | read-only | current | The total number of VRRP packets received by the Virtual router with IPv4 TTL (for VRRP over IPv4) or IPv6 Hop Limit (for VRRP over IPv6) not equal to 255. Dis… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.5 | ColumnrcVrrpTmpStatisticsRcvdPriZeroPackets | read-only | current | The total number of VRRP packets received by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initializa… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.6 | ColumnrcVrrpTmpStatisticsSentPriZeroPackets | read-only | current | The total number of VRRP packets sent by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initialization… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.7 | ColumnrcVrrpTmpStatisticsRcvdInvalidTypePkts | read-only | current | The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. Discontinuities in the value of this counter can occur at … |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.8 | ColumnrcVrrpTmpStatisticsAddressListErrors | read-only | current | The total number of packets received for which the address list does not match the locally configured list for the virtual router. Discontinuities in the value… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.9 | ColumnrcVrrpTmpStatisticsPacketLengthErrors | read-only | current | The total number of packets received with a packet length less than the length of the VRRP header. Discontinuities in the value of this counter can occur at re… |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.10 | ColumnrcVrrpTmpStatisticsRcvdInvalidAuthentications | read-only | current | The total number of packets received with an unknown authentication type. |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.11 | ColumnrcVrrpTmpStatisticsDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have … |
| 1.3.6.1.4.1.2272.1.206.1.2.5.1.12 | ColumnrcVrrpTmpStatisticsRefreshRate | read-only | current | The minimum reasonable polling interval for this entry. This object provides an indication of the minimum Amount of time required to update the counters in thi… |
| 1.3.6.1.4.1.2272.1.206.2 | NodercVrrpExtMib | |||
| 1.3.6.1.4.1.2272.1.206.2.1 | NodercVrrpExtObjects | |||
| 1.3.6.1.4.1.2272.1.206.2.1.1 | NodercVrrpExtScalars | |||
| 1.3.6.1.4.1.2272.1.206.2.1.1.2 | ScalarrcVrrpExtVersionNumber | read-only | current | The version number of Vrrp for IPv6 is 3. |
| 1.3.6.1.4.1.2272.1.206.2.1.1.3 | ScalarrcVrrpExtTrapStateTransitionType | read-only | current | Potential types of state transitions.Used by rcVrrpv3TrapStateTransition trap. |
| 1.3.6.1.4.1.2272.1.206.2.1.1.4 | ScalarrcVrrpExtTrapStateTransitionCause | read-only | current | Potential types of causes that will generate a rcVrrpExtTrapStateTransition trap. |
| 1.3.6.1.4.1.2272.1.206.2.1.1.5 | ScalarrcVrrpExtOperationsVrId | read-only | current | This object contains the Virtual Router Identifier (VRID).This is used in rcVrrpExtTrapStateTransition. |
| 1.3.6.1.4.1.2272.1.206.2.2 | NodercVrrpExtNotifications | |||
| 1.3.6.1.4.1.2272.1.206.2.2.1 | NotificationrcVrrpExtTrapStateTransition | current | A rcVrrpExtTrapStateTransition trap signifies a state transition has occurred on a particular vrrp interface. Implementation of this trap is optional. | |
| 1.3.6.1.4.1.2272.1.206.2.3 | NodercVrrpExtOperations | |||
| 1.3.6.1.4.1.2272.1.206.2.3.11 | TablercVrrpExtOperationsTable | not-accessible | current | Unified Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'rcVrrpExtOperationsEntry'and 'rcVrrpTmpOperatio… |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1 | RowrcVrrpExtOperationsEntry | not-accessible | current | An entry in the rcVrrpExtOperationsTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified… |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.1 | ColumnrcVrrpExtOperationsAction | read-create | current | Used to trigger an action on this vrrp interface. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.2 | ColumnrcVrrpExtOperationsBackUpMaster | read-create | current | Enable the backup VRRP switch traffic forwarding. This will reduce the traffic in IST link in the time of SMLT. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.3 | ColumnrcVrrpExtOperationsBackUpMasterState | read-only | current | Indicate whether backup VRRP switch traffic forwarding is enabled or not. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.4 | ColumnrcVrrpExtOperationsCriticalIpAddr | read-create | current | IP address of the interface that will cause a shutdown event.Only IPv6 address is supported as of now. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.5 | ColumnrcVrrpExtOperationsCriticalIpAddrEnabled | read-create | current | Indicate if an user-defined critical IP address should be enabled. 'NO' = use the default IP address (::). No effect if an user-defined IP address does not exi… |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.6 | ColumnrcVrrpExtOperationsControl | read-create | current | This object will enable/disable the virtual router function. Setting the value to 'enabled', will transition the state of the router from 'initialize to 'backu… |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.7 | ColumnrcVrrpExtOperationsHoldDownTimer | read-create | current | Used to configure the amount of time (in seconds) to wait before preempting the current vrrp master. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.8 | ColumnrcVrrpExtOperationsHoldDownState | read-only | current | Used to indicate the hold-down state of this vrrp interface. If the hold-down timer is operational this variable will be set to 'active'. 'dormant' otherwise. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.9 | ColumnrcVrrpExtOperationsHoldDownTimeRemaining | read-only | current | Used to indicate the amount of time (in seconds) left before the rcVrrpExtOperationsHoldDownTimer will expire. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.10 | ColumnrcVrrpExtOperationsFasterAdvInterval | read-create | current | This is the faster advertisement interval, in milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, t… |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.11 | ColumnrcVrrpExtOperationsFasterAdvIntervalEnabled | read-create | current | Used to indicate if the Faster Advertisement Interval should be used.'Disable' means use regular Advertisement interval. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.12 | ColumnrcVrrpExtOperationsLinkLocalAddr | read-create | current | The assigned Linklocal addresses to the virtual router interface. This mib object support only IPv6 address as of now. |
| 1.3.6.1.4.1.2272.1.206.2.3.11.1.13 | ColumnrcVrrpExtOperationsGlobalIpAddr | read-create | current | The assigned Global addresses to the virtual router interface. This mib object support only IPv6 address as of now. |
| 1.3.6.1.4.1.2272.1.208 | NodercVspTalk | |||
| 1.3.6.1.4.1.2272.1.208.1 | NodercVspTalkObjects | |||
| 1.3.6.1.4.1.2272.1.208.1.1 | NodercVspTalkScalars | |||
| 1.3.6.1.4.1.2272.1.208.1.1.1 | ScalarrcVspTalkGlobalEnable | read-write | current | Create or destroy the VSPTalk related data structure and threads. When it is false, rcVspTalkGroupTable entry will be removed. |
| 1.3.6.1.4.1.2272.1.208.1.1.2 | ScalarrcVspTalkEndpointAddress | read-write | current | The assigned circuitless IP address of the application endpoint which must belong to the same subnet of existing IP interface on device. This object assignment… |
| 1.3.6.1.4.1.2272.1.208.1.1.3 | ScalarrcVspTalkEndpointVrfName | read-write | current | The name of the virtual Router which rcVspTalkEndpointAddress belong to. |
| 1.3.6.1.4.1.2272.1.208.1.1.4 | ScalarrcVspTalkNotificationEnable | read-write | current | Enable/disable the notifcation of the register events |
| 1.3.6.1.4.1.2272.1.208.1.2 | TablercVspTalkGroupTable | not-accessible | current | Vsp Talk Group includes IM configuraton and users |
| 1.3.6.1.4.1.2272.1.208.1.2.1 | RowrcVspTalkGroupEntry | not-accessible | current | Entry of the IM group |
| 1.3.6.1.4.1.2272.1.208.1.2.1.1 | ColumnrcVspTalkGroupType | not-accessible | current | Type of VSP messaging group |
| 1.3.6.1.4.1.2272.1.208.1.2.1.2 | ColumnrcVspTalkGroupServerAddress | read-create | current | Messaging server address |
| 1.3.6.1.4.1.2272.1.208.1.2.1.3 | ColumnrcVspTalkGroupServerPort | read-create | current | The TCP port for Messaging |
| 1.3.6.1.4.1.2272.1.208.1.2.1.4 | ColumnrcVspTalkGroupServerOldSslTypeEnable | read-create | current | Enable/disable using old style SSL interface |
| 1.3.6.1.4.1.2272.1.208.1.2.1.5 | ColumnrcVspTalkGroupServerEncryption | read-create | current | Encrytion option. |
| 1.3.6.1.4.1.2272.1.208.1.2.1.6 | ColumnrcVspTalkGroupServerProxy | read-create | current | Messaging server proxy |
| 1.3.6.1.4.1.2272.1.208.1.2.1.7 | ColumnrcVspTalkGroupClientUsername | read-create | current | Messaging client Username for this device |
| 1.3.6.1.4.1.2272.1.208.1.2.1.8 | ColumnrcVspTalkGroupClientPassword | read-create | current | Password for rcVspTalkGroupClientUsername which is registered in the server. |
| 1.3.6.1.4.1.2272.1.208.1.2.1.9 | ColumnrcVspTalkGroupClientMembers | read-create | current | A list of members of this messaging group. There is a max of 12 members, with names seperated by comma |
| 1.3.6.1.4.1.2272.1.208.1.2.1.10 | ColumnrcVspTalkGroupEnable | read-create | current | Adminstratively Enable/disable this messaging group |
| 1.3.6.1.4.1.2272.1.208.1.2.1.11 | ColumnrcVspTalkGroupRowStatus | read-create | current | Used to create/delete entries |
| 1.3.6.1.4.1.2272.2 | NodercA1100 | |||
| 1.3.6.1.4.1.2272.6 | NodercA1250 | |||
| 1.3.6.1.4.1.2272.7 | NodercA1150 | |||
| 1.3.6.1.4.1.2272.8 | NodercA1200 | |||
| 1.3.6.1.4.1.2272.9 | NodercA1050 | |||
| 1.3.6.1.4.1.2272.20 | NodercA740 | |||
| 1.3.6.1.4.1.2272.21 | NodercA750 | |||
| 1.3.6.1.4.1.2272.22 | NodercA790 | |||
| 1.3.6.1.4.1.2272.23 | NodercA750S | |||
| 1.3.6.1.4.1.2272.30 | NodercA8610 | |||
| 1.3.6.1.4.1.2272.31 | NodercA8606 | |||
| 1.3.6.1.4.1.2272.32 | NodercA8110 | |||
| 1.3.6.1.4.1.2272.33 | NodercA8106 | |||
| 1.3.6.1.4.1.2272.34 | NodercA8603 | |||
| 1.3.6.1.4.1.2272.35 | NodercA8103 | |||
| 1.3.6.1.4.1.2272.36 | NodercA8110co | |||
| 1.3.6.1.4.1.2272.37 | NodercA8610co | |||
| 1.3.6.1.4.1.2272.40 | NodercBayStack | |||
| 1.3.6.1.4.1.2272.42 | NodercA1424 | |||
| 1.3.6.1.4.1.2272.43 | NodercA1648 | |||
| 1.3.6.1.4.1.2272.44 | NodercA1612 | |||
| 1.3.6.1.4.1.2272.45 | NodercA1624 | |||
| 1.3.6.1.4.1.2272.46 | NodercRBS2402 | |||
| 1.3.6.1.4.1.2272.201 | NodercVSP9012 | |||
| 1.3.6.1.4.1.2272.280887555 | NodercA8003 | |||
| 1.3.6.1.4.1.2272.280887558 | NodercA8006 | |||
| 1.3.6.1.4.1.2272.280887562 | NodercA8010 | |||
| 1.3.6.1.4.1.2272.1623064842 | NodercA8010co | |||
| 1.3.6.1.6 | NodesnmpV2 | |||
| 1.3.6.1.6.3 | NodesnmpModules | |||
| 1.3.6.1.6.3.1 | NodesnmpMIB | |||
| 1.3.6.1.6.3.1.1 | NodesnmpMIBObjects | |||
| 1.3.6.1.6.3.1.1.5 | NodesnmpTraps |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BridgeId | OCTET STRING (SIZE (8)) | current | An identifier that identifies the Bridge Id |
| CfmEgressActionFieldValue | INTEGER { egrOk (1), egrDown (2), egrBlocked (3), egrVid (4), egrNoTlv (5) } | current | Possible values returned in the egress action field |
| CfmIngressActionFieldValue | INTEGER { ingOk (1), ingDown (2), ingBlocked (3), ingVid (4), ingNoTlv (5) } | current | Possible values returned in the ingress action field. |
| CfmRelayActionFieldValue | INTEGER { rlyHit (1), rlyFdb (2), rlyMpdb (3), unknown (4) } | current | Possible values the Relay action field can take. |
| DeviceStatus | INTEGER { invalid(1), down(2), up(3), disabled(4) } | current | Standard card states for slotted chassis based products |
| Dot1pValueSet | INTEGER { zero(0), one(1), two(2), three(3), four(4), five(5), six(6), seven(7), disable(8) } | current | 802.1p Values |
| DropPrecedence | INTEGER { low(0), medium(1), high(2) } | current | QOS Drop Precedence |
| DscpValueSet | INTEGER { phbcs0(0), val1(1), val2(2), val3(3), val4(4), val5(5), val6(6), val7(7), phbcs1(8), val9(9), phbaf11(10), val11(11), phbaf12(12), val13(13), phbaf13(14), val15(15), phbcs2(16), val17(17), phbaf21(18), val19(19), phbaf22(20), val21(21), phbaf23(22), val23(23), phbcs3(24), val25(25), phbaf31(26), val27(27), phbaf32(28), val29(29), phbaf33(30), val31(31), phbcs4(32), val33(33), phbaf41(34), val35(35), phbaf42(36), val37(37), phbaf43(38), val39(39), phbcs5(40), val41(41), val42(42), val43(43), val44(44), val45(45), phbef(46), val47(47), phbcs6(48), val49(49), val50(50), val51(51), val52(52), val53(53), val54(54), val55(55), phbcs7(56), val57(57), val58(58), val59(59), val60(60), val61(61), val62(62), val63(63), disableOrInvalid(64) } | current | DSCP Values |
| EnableValue | INTEGER { enable(1), disable(2) } | current | Enable/Disable value. |
| IdList | OCTET STRING | current | An identifier for a list of Ids. |
| InterfaceIndex | Integer32 | current | Port IfIndex. |
| InterfaceIndexOrZero | Integer32 (0..2147483647) | current | This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits t… |
| IpAddressOriginTC | INTEGER { other(1), manual(2), dhcp(4), linklayer(5), random(6) } | current | The origin of the address. manual(2) indicates that the address was manually configured to a specified address, e.g. by user configuration. dhcp(4) indicates an address that was assigned to this system by a DHCP server.… |
| IpAddressStatusTC | INTEGER { preferred(1), deprecated(2), invalid(3), inaccessible(4), unknown(5), tentative(6), duplicate(7) } | current | The status of an address. Most of the states correspond to states from the IPv6 Stateless Address Autoconfiguration protocol [5]. The preferred(1) state indicates that this is a valid address that can appear as the dest… |
| Ipv6NextHdr | INTEGER { hop-by-hop(0), icmpv4(1), igmpv4(2), ipInIp(4), tcp(6), egp(8), udp(17), ipv6(41), routing(43), frag(44), rsvp(46), ipsecESP(50), ipsecAh(51), icmpv6(58), noNxtHdr(59), destOptions(60), undefined(255) } | current | The ipv6 next header to look for. |
| IsisDefaultL1Metric | Integer32 (1..63) | current | Integer sub-range for default metric for single hop. ISO 10589 provides for 4 types of metric. Only the 'default' metric is used in practice. |
| IsisPlsbBvid | Integer32 (0..4084) | current | ISIS B-VLAN ID. |
| IsisPlsbBvidTieBrkAlg | INTEGER{ low-pathid(1), high-pathid(2) } | current | ISIS B-VLAN tie breaking algorithm. |
| IsisPlsbNodeNickName | OCTET STRING (SIZE(3)) | current | Plsb Node Nick name. |
| IsisSystemID | OCTET STRING (SIZE(6)) | current | A system ID. |
| IsisWideL1Metric | Integer32 (1..16777215) | current | Wide Metric for IS Neighbors. ISO 10589 provides a 6 bit metric. Traffic Engineering extensions provide 24 bit metrics. |
| LaneList | OCTET STRING (SIZE (8)) | current | The string is 8 octets long, for a total of 64 bits. Each bit corresponds to a lane. Each I/O slot can have 4 or 6 lanes based on the card type. When a bit has the value one(1), the corresponding lane is a member of the… |
| LaneSet | OCTET STRING (SIZE (4)) | current | The set of lanes that are members of this Global Policer. The string is 4 octets long, for a total of 32 bits. Each bit corresponds to a laneId. Each I/O slot has 4 laneIds. When a bit has the value one(1), the correspo… |
| LldpPortId | OCTET STRING (SIZE (1..255)) | current | This TC describes the format of a port identifier string. Objects of this type are always used with an associated LldpPortIdSubtype object, which identifies the format of the particular LldpPortId object instance. If th… |
| LldpPortIdSubtype | INTEGER { interfaceAlias(1), portComponent(2), macAddress(3), networkAddress(4), interfaceName(5), agentCircuitId(6), local(7) } | current | This TC describes the source of a particular type of Port identifier used in the LLDP MIB. The enumeration 'interfaceAlias(1)' represents a port identifier based on the ifAlias MIB object, defined in IETF RFC 2863. The … |
| MplsExpValueSet | INTEGER { zero(0), one(1), two(2), three(3), four(4), five(5), six(6), seven(7), disable(8) } | current | Mpls Exp Values |
| PortSet | OCTET STRING (SIZE (0..255)) | current | The string is 88 octets long, for a total of 704 bits. Each bit corresponds to a port, as represented by its ifIndex value . When a bit has the value one(1), the corresponding port is a member of the set. When a bit has… |
| QosLevelValueSet | INTEGER { zero(0), one(1), two(2), three(3), four(4), five(5), six(6), seven(7), disable(8) } | current | QOS Levels |
| RcIpBgpTmpAddressFamilyIdentifierTC | Unsigned32(0..65535) | current | The representation of a BGP AFI |
| RcIpBgpTmpIdentifierTC | OCTET STRING(SIZE (4)) | current | The representation of a BGP Identifier. BGP Identifiers are presented in the received network byte order. The BGP Identifier is displayed as if it is an IP address, even if it would be an illegal one. |
| RcIpBgpTmpSubsequentAddressFamilyIdentifierTC | Unsigned32(0..255) | current | The representation of a BGP SAFI |
| RcLongDisplayString | OCTET STRING (SIZE(0..65535)) | current | The semantics are identical to the standard DisplayString in RFC1213 and RFC2579, except for the longer length that is allowed with this TC. |
| RcVlanIdOrNone | INTEGER (1..4084) | current | Range of VLAN IDs supported for application |
| RouterDeadRange | Integer32 (1..'FFF'h) | current | The range of intervals in seconds that a routers hello must have not been seen before a neighbor declares the router down |
| SfDeviceMode | INTEGER { other (1), bme(2), se(3) } | current | Mode of given Fast SE Device either BME or SE |
| Timeout | Integer32 | current | An identifier that identifies the timeout value. |
| UpToRefreshInterval | Integer32 (1..1800) | current | The values one might be able to configure for variables bounded by the Refresh Interval |
| VPNId | OCTET STRING (SIZE (7)) | current | The purpose of a VPN-ID is to uniquely identify a VPN. The Global VPN Identifier format is: 3 octet VPN Authority, Organizationally Unique Identifier followed by 4 octet VPN index identifying VPN according to OUI |
| VrfIdentifier | Unsigned32 (0..512) | current | Virtual Router Identifier. VRFID 0 is reserved for the Administrative VRF and cannot be used to create VRF's. |
| VrfRpTriggerBitCode | BITS { rip (0), ospf(1), bgp (2) } | current | This object represents Routing Protocol (RP) Triggers on a Virtual Router. The BITS represent an Action-code that specifies the action on the Routing Protocols. The actions are: initiate or shutdown. When encoding the R… |