RC-2K-ATM-MIB
96 objects
Enterprise MIB for the Accelar product family.
Imported Objects
| IF-MIB | InterfaceIndex |
| RAPID-CITY | IdList |
| RC-2K-MIB | rc2kAtm |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.100.9.0 | Identityrc2kAtmMib | Enterprise MIB for the Accelar product family. | ||
| 1.3.6.1.4.1.2272.1.100.9.1 | Noderc2kAtmGlobal | |||
| 1.3.6.1.4.1.2272.1.100.9.1.1 | Scalarrc2kAtmElanStatsClearAll | read-write | current | Clear all Elan Statistics |
| 1.3.6.1.4.1.2272.1.100.9.2 | Tablerc2kAtmPortTable | not-accessible | current | ATM port table |
| 1.3.6.1.4.1.2272.1.100.9.2.1 | Rowrc2kAtmPortEntry | not-accessible | current | Entry containing infomation of ATM port |
| 1.3.6.1.4.1.2272.1.100.9.2.1.1 | Columnrc2kAtmPortIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.2.1.2 | Columnrc2kAtmPortNumVpiBits | read-write | current | # of vpi bits. For OC3, the max number of vpibits is 6. However, for OC12, it is 8. Both media types share the same MIB object. |
| 1.3.6.1.4.1.2272.1.100.9.2.1.3 | Columnrc2kAtmPortNumVciBits | read-write | current | # of vci bits |
| 1.3.6.1.4.1.2272.1.100.9.2.1.4 | Columnrc2kAtmPortMediaType | read-only | current | media type |
| 1.3.6.1.4.1.2272.1.100.9.2.1.5 | Columnrc2kAtmPortScrambleEnable | read-write | current | enable scramble |
| 1.3.6.1.4.1.2272.1.100.9.2.1.6 | Columnrc2kAtmPortFramingMode | read-write | current | port framing mode |
| 1.3.6.1.4.1.2272.1.100.9.2.1.7 | Columnrc2kAtmPortClockSource | read-write | current | clock source |
| 1.3.6.1.4.1.2272.1.100.9.2.1.8 | Columnrc2kAtmPortLineSpeed | read-only | current | line speed |
| 1.3.6.1.4.1.2272.1.100.9.2.1.9 | Columnrc2kAtmPortLoopBackMode | read-write | current | loop back mode |
| 1.3.6.1.4.1.2272.1.100.9.2.1.10 | Columnrc2kAtmPortMacAddress | read-only | current | XLR assigned MAC addr |
| 1.3.6.1.4.1.2272.1.100.9.3 | Tablerc2kAtmPvcTable | not-accessible | current | ATM Pvc table |
| 1.3.6.1.4.1.2272.1.100.9.3.1 | Rowrc2kAtmPvcEntry | not-accessible | current | Entry containing infomation of ATM Pvc |
| 1.3.6.1.4.1.2272.1.100.9.3.1.1 | Columnrc2kAtmPvcIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.3.1.2 | Columnrc2kAtmPvcVpi | read-only | current | vpi of this pvc |
| 1.3.6.1.4.1.2272.1.100.9.3.1.3 | Columnrc2kAtmPvcVci | read-only | current | vci of this pvc |
| 1.3.6.1.4.1.2272.1.100.9.3.1.4 | Columnrc2kAtmPvcPvcId | read-only | current | internal pvc id |
| 1.3.6.1.4.1.2272.1.100.9.3.1.5 | Columnrc2kAtmPvcName | read-write | current | name of pvc |
| 1.3.6.1.4.1.2272.1.100.9.3.1.6 | Columnrc2kAtmPvcEncapsulation | read-write | current | encapsulation |
| 1.3.6.1.4.1.2272.1.100.9.3.1.7 | Columnrc2kAtmPvcServiceType | read-write | current | service type |
| 1.3.6.1.4.1.2272.1.100.9.3.1.8 | Columnrc2kAtmPvcPeakCellRate | read-write | current | Peak cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. However… |
| 1.3.6.1.4.1.2272.1.100.9.3.1.9 | Columnrc2kAtmPvcSustainedCellRate | read-write | current | Sustained cell rate in cells per second. The maximum peak cell rate is half of the line rate. The peak cell rate for MDA type OC12 must be less than 733491. Ho… |
| 1.3.6.1.4.1.2272.1.100.9.3.1.10 | Columnrc2kAtmPvcMaxBurstSize | read-write | current | max burst size |
| 1.3.6.1.4.1.2272.1.100.9.3.1.11 | Columnrc2kAtmPvcRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.100.9.3.1.12 | Columnrc2kAtmPvcOamLbMgmtEnable | read-write | current | Indicate whether end-to-end F5 OAM loopback is enabled. When it is enabled, OAM loopback request is sent periodically |
| 1.3.6.1.4.1.2272.1.100.9.3.1.13 | Columnrc2kAtmPvcOamLbSendFrequency | read-write | current | Number of seconds between transmitting OAM loopback request |
| 1.3.6.1.4.1.2272.1.100.9.3.1.14 | Columnrc2kAtmPvcOamLbRetryFrequency | read-write | current | Number of seconds between retry |
| 1.3.6.1.4.1.2272.1.100.9.3.1.15 | Columnrc2kAtmPvcOamLbUpCount | read-write | current | Number of consecutive end-to-end F5 OAM loopback cell responses that must be received in order to change a PVC connection state to up |
| 1.3.6.1.4.1.2272.1.100.9.3.1.16 | Columnrc2kAtmPvcOamLbDownCount | read-write | current | Number of consecutive end-to-end F5 OAM loopback cell responses that are not received in order to change a PVC state to down. |
| 1.3.6.1.4.1.2272.1.100.9.3.1.17 | Columnrc2kAtmPvcOamTrapEnable | read-write | current | Indicate whether OAM trap is enabled. When it is enabled, a trap is sent to the management station when rc2kAtmPvcOamVcStatus is going up or down. |
| 1.3.6.1.4.1.2272.1.100.9.3.1.18 | Columnrc2kAtmPvcOamVcStatus | read-only | current | Indicate the status of PVC link. Not Managed Down Verify loopback cells are sent at retry frequency to verify the VC is really down. After down-count unsuccess… |
| 1.3.6.1.4.1.2272.1.100.9.3.1.19 | Columnrc2kAtmPvcOamLbRequestSent | read-only | current | Number of OAM loopback request sent |
| 1.3.6.1.4.1.2272.1.100.9.3.1.20 | Columnrc2kAtmPvcOamLbReplySent | read-only | current | Number of OAM loopback reply sent |
| 1.3.6.1.4.1.2272.1.100.9.3.1.21 | Columnrc2kAtmPvcOamLbReplyReceived | read-only | current | Number of OAM loopback reply received |
| 1.3.6.1.4.1.2272.1.100.9.5 | Tablerc2kAtm1483ElanTable | not-accessible | current | ATM 1483Elan table |
| 1.3.6.1.4.1.2272.1.100.9.5.1 | Rowrc2kAtm1483ElanEntry | not-accessible | current | Entry containing infomation of ATM 1483Elan |
| 1.3.6.1.4.1.2272.1.100.9.5.1.1 | Columnrc2kAtm1483ElanIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.5.1.2 | Columnrc2kAtm1483ElanElanId | read-only | current | Elan Id |
| 1.3.6.1.4.1.2272.1.100.9.5.1.3 | Columnrc2kAtm1483ElanNumPvcIds | read-only | current | # pvc-ids in list |
| 1.3.6.1.4.1.2272.1.100.9.5.1.4 | Columnrc2kAtm1483ElanPvcIds | read-write | current | list of pvc-ids. each pvc-id is represented by a 32 bit value this field can contain a maximum of 64 pvc-ids. |
| 1.3.6.1.4.1.2272.1.100.9.5.1.5 | Columnrc2kAtm1483ElanVlanId | read-write | current | vlan tag for this 1483 |
| 1.3.6.1.4.1.2272.1.100.9.5.1.6 | Columnrc2kAtm1483ElanRowStatus | read-write | current | row status |
| 1.3.6.1.4.1.2272.1.100.9.5.1.7 | Columnrc2kAtm1483ElanConnectType | read-write | current | connection type |
| 1.3.6.1.4.1.2272.1.100.9.5.1.8 | Columnrc2kAtm1483ElanVlanMacAddress | read-only | current | mac for vlan |
| 1.3.6.1.4.1.2272.1.100.9.5.1.9 | Columnrc2kAtm1483ElanDummyMacAddress | read-only | current | dummy mac for the other router |
| 1.3.6.1.4.1.2272.1.100.9.5.1.10 | Columnrc2kAtm1483ElanLocalIpAddress | read-write | current | local ip, if ConnectType is ip(2) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.11 | Columnrc2kAtm1483ElanRemoteIpAddress | read-write | current | remote ip, if ConnectType is ip(2) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.12 | Columnrc2kAtm1483ElanInArpSendEnable | read-write | current | enable arp sending on the port, if ConnectType is ip(2) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.13 | Columnrc2kAtm1483ElanInArpSendInterval | read-write | current | interval of arp sending on the port, if ConnectType is ip(2) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.14 | Columnrc2kAtm1483ElanIpxVlanEncapMethod | read-write | current | vlan encapsulation method, if ConnectType is ipx(3) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.15 | Columnrc2kAtm1483ElanIpxNetworkNum | read-write | current | network number, if ConnectType is ipx(3) |
| 1.3.6.1.4.1.2272.1.100.9.5.1.16 | Columnrc2kAtm1483ElanStgId | read-only | current | An identifier used to identify a STG in the device, only in bridge mode |
| 1.3.6.1.4.1.2272.1.100.9.5.1.17 | Columnrc2kAtm1483ElanrcStgTaggedBpduVlanId | read-only | current | The VLAN ID to be used for tagging BPDUs, only in bridge mode. |
| 1.3.6.1.4.1.2272.1.100.9.5.1.18 | Columnrc2kAtm1483ElanIpxNetworkAddr | read-write | current | network number, instead of rc2kAtm1483ElanIpxNetworkNum |
| 1.3.6.1.4.1.2272.1.100.9.8 | Tablerc2kAtmSioCardConfigTable | not-accessible | current | 2kAtm Sio Card Config Table |
| 1.3.6.1.4.1.2272.1.100.9.8.1 | Rowrc2kAtmSioCardConfigEntry | not-accessible | current | Entry containing infomation of 2kAtm Sio Card Config. |
| 1.3.6.1.4.1.2272.1.100.9.8.1.1 | Columnrc2kAtmSioCardConfigSlotIndex | read-only | current | slot Index. |
| 1.3.6.1.4.1.2272.1.100.9.8.1.2 | Columnrc2kAtmSioCardConfigAction | read-write | current | |
| 1.3.6.1.4.1.2272.1.100.9.8.1.3 | Columnrc2kAtmSioCardConfigTraceMode | read-write | current | |
| 1.3.6.1.4.1.2272.1.100.9.8.1.4 | Columnrc2kAtmSioCardConfigImageFileName | read-only | current | ATM Image file name. |
| 1.3.6.1.4.1.2272.1.100.9.8.1.5 | Columnrc2kAtmSioCardConfigElanStatsEnable | read-write | current | Enable/Disable Elan Statistics collection |
| 1.3.6.1.4.1.2272.1.100.9.8.1.6 | Columnrc2kAtmSioCardConfigStatsPollPeriod | read-write | current | Time interval after which Elan statistics would be polled |
| 1.3.6.1.4.1.2272.1.100.9.10 | Tablerc2kAtmPortStatsTable | not-accessible | current | ATM port statistics table |
| 1.3.6.1.4.1.2272.1.100.9.10.1 | Rowrc2kAtmPortStatsEntry | not-accessible | current | Entry containing infomation of ATM port statistics |
| 1.3.6.1.4.1.2272.1.100.9.10.1.1 | Columnrc2kAtmPortStatsIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.10.1.2 | Columnrc2kAtmPortStatsInCells | read-only | current | Number of Cells received from ATM interface |
| 1.3.6.1.4.1.2272.1.100.9.10.1.3 | Columnrc2kAtmPortStatsOutCells | read-only | current | Number of Cells transmitted by ATM interface |
| 1.3.6.1.4.1.2272.1.100.9.10.1.4 | Columnrc2kAtmPortStatsOutIdleCells | read-only | current | Number of Idle Cells transmitted |
| 1.3.6.1.4.1.2272.1.100.9.10.1.5 | Columnrc2kAtmPortStatsInHecCorrected | read-only | current | Number of received cells in which HCS was corrected |
| 1.3.6.1.4.1.2272.1.100.9.10.1.6 | Columnrc2kAtmPortStatsInHecUncorrected | read-only | current | Number of received cells dropped because HCS couldn't be corrected |
| 1.3.6.1.4.1.2272.1.100.9.10.1.7 | Columnrc2kAtmPortStatsInUnknownProtos | read-only | current | Number of received cells dropped with wrong VPI/VCI |
| 1.3.6.1.4.1.2272.1.100.9.10.1.8 | Columnrc2kAtmPortStatsInPkts | read-only | current | Number of AAL5 CPCS PDUs received |
| 1.3.6.1.4.1.2272.1.100.9.10.1.9 | Columnrc2kAtmPortStatsOutPkts | read-only | current | Number of AAL5 CPCS PDUs transmitted |
| 1.3.6.1.4.1.2272.1.100.9.10.1.10 | Columnrc2kAtmPortStatsInDroppedPkts | read-only | current | Number of AAL5 CPCS PDUs dropped due to resource exhaustion |
| 1.3.6.1.4.1.2272.1.100.9.10.1.11 | Columnrc2kAtmPortStatsOutDroppedPkts | read-only | current | Number of AAL5 CPCS PDUs dropped because the transmitter closed the channel |
| 1.3.6.1.4.1.2272.1.100.9.11 | Tablerc2kAtmVPortStatsTable | not-accessible | current | ATM Elan statistics table |
| 1.3.6.1.4.1.2272.1.100.9.11.1 | Rowrc2kAtmVPortStatsEntry | not-accessible | current | Entry containing infomation of ATM Elan statistics |
| 1.3.6.1.4.1.2272.1.100.9.11.1.1 | Columnrc2kAtmVPortStatsIfIndex | read-only | current | port number |
| 1.3.6.1.4.1.2272.1.100.9.11.1.2 | Columnrc2kAtmVPortStatsVlanId | read-only | current | Vlan Id |
| 1.3.6.1.4.1.2272.1.100.9.11.1.3 | Columnrc2kAtmVPortStatsClear | read-write | current | Clear Elan Stats |
| 1.3.6.1.4.1.2272.1.100.9.11.1.4 | Columnrc2kAtmVPortStatsInOctets | read-only | current | AAL5 CPCS PDU octects received from ATM interface |
| 1.3.6.1.4.1.2272.1.100.9.11.1.5 | Columnrc2kAtmVPortStatsOutOctets | read-only | current | AAL5 CPCS PDU octects transmitted out of ATM interface |
| 1.3.6.1.4.1.2272.1.100.9.11.1.6 | Columnrc2kAtmVPortStatsInErrors | read-only | current | AAL5 CPCS PDUs received with errors from ATM interface. These errors include CRC-32 errors,SAR time-out errors And oversized SDU errors |
| 1.3.6.1.4.1.2272.1.100.9.11.1.7 | Columnrc2kAtmVPortStatsOutErrors | read-only | current | Number of AAL5 CPCS PDUs that couldn't be transmitted due to errors |
| 1.3.6.1.4.1.2272.1.100.9.11.1.8 | Columnrc2kAtmVPortStatsInDiscards | read-only | current | Number of received AAL5 CPCS PDUs discarded |
| 1.3.6.1.4.1.2272.1.100.9.11.1.9 | Columnrc2kAtmVPortStatsOutDiscards | read-only | current | Number of AAL5 CPCS PDUs which are to be transmitted but discarded |
| 1.3.6.1.4.1.2272.1.100.9.11.1.10 | Columnrc2kAtmVPortStatsInUcastPkts | read-only | current | Received ethernet/IP/IPX packets whose destination address is neither a multicast nor a broadcast address |
| 1.3.6.1.4.1.2272.1.100.9.11.1.11 | Columnrc2kAtmVPortStatsOutUcastPkts | read-only | current | Forwarded ethernet/IP/IPX packets whose destination address is neither a multicast nor a broadcast address |
| 1.3.6.1.4.1.2272.1.100.9.11.1.12 | Columnrc2kAtmVPortStatsInMulticastPkts | read-only | current | Received ethernet/IP/IPX packets whose destination MAC address(or IP address in case of IP ELAN type) is multicast MAC address or class D IP address (in case o… |
| 1.3.6.1.4.1.2272.1.100.9.11.1.13 | Columnrc2kAtmVPortStatsOutMulticastPkts | read-only | current | Forwarded ethernet/IP/IPX packets whose destination MAC address(or IP address in case of IP ELAN type) is multicast MAC address or class D IP address (in case … |
| 1.3.6.1.4.1.2272.1.100.9.11.1.14 | Columnrc2kAtmVPortStatsInBroadcastPkts | read-only | current | Received ethernet/IP/IPX packets whose destination address in broadcast address |
| 1.3.6.1.4.1.2272.1.100.9.11.1.15 | Columnrc2kAtmVPortStatsOutBroadcastPkts | read-only | current | Forwarded ethernet/IP/IPX packets whose destination address in broadcast address |