RC-PORT-MIB
319 objects
Enterprise MIB for the Accelar product family.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.4.10.0 | IdentityrcPortMib | for | Enterprise MIB for the Accelar product family. | |
| 1.3.6.1.4.1.2272.1.4.10.1 | TablercPortTable | not-accessible | current | Port table |
| 1.3.6.1.4.1.2272.1.4.10.1.1 | RowrcPortEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.1 | ColumnrcPortIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.2 | ColumnrcPortType | read-only | current | Port type |
| 1.3.6.1.4.1.2272.1.4.10.1.1.3 | ColumnrcPortConnectorType | read-only | current | Type of connector installed on this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.4 | ColumnrcPortPerformRouting | read-write | deprecated | Indicate whether this port should perform routing |
| 1.3.6.1.4.1.2272.1.4.10.1.1.5 | ColumnrcPortHighPriority | read-write | deprecated | Indicate whether this port should be treated with high priority |
| 1.3.6.1.4.1.2272.1.4.10.1.1.6 | ColumnrcPortAction | read-write | current | Port related actions. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.7 | ColumnrcPortResult | read-only | current | Result from the last Vlan action. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.8 | ColumnrcPortPrimaryConnector | read-write | current | For ports configured with redundant connectors, this value is used to indicate which connector should be used as the 'active' connector on this port the next t… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.9 | ColumnrcPortActiveConnector | read-only | current | For ports configured with redundant connectors, this value is used to indicate which connector is currently the active one. Only one connector can be active an… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.10 | ColumnrcPortBackupConnectorStatus | read-only | current | Indicate the status of the link attached to the back-up (non-active) connector. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.11 | ColumnrcPortAutoNegotiate | read-write | current | Indicate whether this port enabled for auto negotiations or not. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.12 | ColumnrcPortAdminDuplex | read-write | current | Indicates the port duplex type |
| 1.3.6.1.4.1.2272.1.4.10.1.1.13 | ColumnrcPortOperDuplex | read-only | current | Indicate this port's current duplex value. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.14 | ColumnrcPortAdminSpeed | read-write | current | Indicate this port's speed. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.15 | ColumnrcPortOperSpeed | read-only | current | Indicate this port's current speed value. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.16 | ColumnrcPortMltId | read-only | current | Indicate which multi-link trunk (MLT) this port is assigned to. If this port is not associated with any MLT, this value will be set to zero(0). |
| 1.3.6.1.4.1.2272.1.4.10.1.1.17 | ColumnrcPortLocked | read-only | current | Indicate whether this port is locked. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.18 | ColumnrcPortAutoNegotiationSupported | read-only | current | Indicate whether this port can support auto-negotiation. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.19 | ColumnrcPortSingleRoutablePort | read-only | current | Indicate whether this port is a single routable port. If this value is true, the port functions like a traditional router port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.20 | ColumnrcPortUnknownMacDiscard | read-write | current | If rcUnknownMacDiscard is set to True, then a packet with an unknown source MAC address is dropped on that port, and other ports then will discard any packets … |
| 1.3.6.1.4.1.2272.1.4.10.1.1.21 | ColumnrcPortNumStateTransition | read-only | current | # state transitions. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.22 | ColumnrcPortUserPriority | read-write | deprecated | User priority level. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.23 | ColumnrcPortAllowOversizeFrame | read-write | deprecated | Used to specify whether over-size frames should be processed or dropped. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.30 | ColumnrcPortQosLevel | read-write | current | Used to specify the Qos level packets, carried on this port, should be processed with. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.31 | ColumnrcPortDiffServEnable | read-write | current | Used to enable/disable the Differentiated Service feature on this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.32 | ColumnrcPortDiffServType | read-write | current | Used to specify the Differentiated Service type for this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.33 | ColumnrcPortDiffServIeee8021POverrideEnable | read-write | deprecated | Used to enable/disable the Differentiated Service IEEE 802.1P over-ride feature. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.34 | ColumnrcPortVendorDescr | read-only | current | Used to show the name of the vendor of this port's connector. Only applicable to ports on a GBIC cards. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.35 | ColumnrcPortName | read-write | current | This port's name. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.36 | ColumnrcPortOctapidId | read-only | deprecated | The octapid id of the mirrored port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.37 | ColumnrcPortWan | read-write | current | Indicatie this port's current WAN/LAN mode. Valid for 10 GE only |
| 1.3.6.1.4.1.2272.1.4.10.1.1.38 | ColumnrcPortTransport | read-write | current | Indicatie this port's current tranport layer. Valid for 10 GE only |
| 1.3.6.1.4.1.2272.1.4.10.1.1.39 | ColumnrcPortMultimediaFilterEnable | read-write | current | Used to enable/disable the Telephony device selected on this port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.40 | ColumnrcPortMultimediaDevSelection | read-write | current | Used to set/get the selected Multimedia & Telephony Devices on this port. The String is the name of the device in the rcIpFilterMediaDevTable |
| 1.3.6.1.4.1.2272.1.4.10.1.1.41 | ColumnrcPortServiceType | read-write | current | Indicates the port functionality. 12uni is used to configure the port to be part of Martini service, tls is used to configure the port to be part of Any2Any VP… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.42 | ColumnrcPortMode | read-write | current | The port mode for l2uni service type.If the port is configured for l2uni service type, then the mode can be transparent or switched. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.43 | ColumnrcPortAdminRouting | read-write | current | Indicate whether the port is routable. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.44 | ColumnrcPortOperRouting | read-only | current | The status of the port whether is routable. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.45 | ColumnrcPortPid | read-only | current | The pid of the mirrored port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.46 | ColumnrcPortIeee8021POverrideEnable | read-write | current | Used to enable/disable IEEE 802.1P override. If it is enabled, 802.1p vlaue from a tagged frame may not honor. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.47 | ColumnrcPortShaperEnable | read-write | current | Used to enable/disable shaper on the port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.48 | ColumnrcPortShaperMaxRate | read-write | current | Shaping rate in mega bits per second. Note that actual shaping rate might be different from the configured rate due to the rate granularity of the shaper. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.49 | ColumnrcPortShaperBurstSize | read-write | current | Burst size in kilo bytes per second. Note that actual burst size might be different from the configured size due to the granularity of the shaper. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.50 | ColumnrcPortCpLimitShutDown | read-only | current | A TRUE value indicates if CP Limit shut down the interface. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.51 | ColumnrcPortHighSecureEnable | read-write | current | Enable/Disable high secure. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.52 | ColumnrcPortTlsPriorityOverride | read-write | current | Enable/Disable tls port priority override feature. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.53 | ColumnrcPortVctAbility | read-only | current | If this object is TRUE, then the specified port is hardware-capable of doing the VCT test, if the rcPortAdminStatus is also true. If this object is FALSE, then… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.54 | ColumnrcPortVctAdminStatus | read-write | current | Admin status for port VCT test. If this object is set to TRUE, then the VCT test can be performed. If it is set to FALSE, then the test cannot be performed, ev… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.55 | ColumnrcPortMrouteStrLimit | read-write | current | maximum number of multicast streams that are allowed to ingress to CPU through this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.56 | ColumnrcPortMrouteStrTimerCheck | read-write | current | sampling period to check number of multicast streams that has ingressed CPU through this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.57 | ColumnrcPortMrouteStrLimitEnable | read-write | current | enable or disable mroute stream limit on port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.58 | ColumnrcPortUpdateDynamicMacQosLevel | read-write | current | It is used to indicate whether to update qos level for dynamic learned mac add resses associated with a port-based vlan when port qos level changes. If it is s… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.59 | ColumnrcPortVplsDualHoming | read-write | current | The VPLS dual homing is for VPLS service type only. It can be disable, firstNNI or secondNNI. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.60 | ColumnrcPortVplsMgmtVlan | read-write | current | Management Vlan is configured on this port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.61 | ColumnrcPortTlsManagedBySp | read-write | current | True/False tls devices on port Managed By Service Provider. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.62 | ColumnrcPortAutoNegAd | read-write | current | This object is used to specify the port speed and duplex abilities to be advertised during link negotiation. bit 0 - 10 half duplex advertised bit 1 - 10 full … |
| 1.3.6.1.4.1.2272.1.4.10.1.1.63 | ColumnrcPortAutoNegAdCapability | read-only | current | This object indicates the port speed and duplex capabilities that hardware can actually support on a port, and which may be advertised by the port using auto-n… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.64 | ColumnrcPortAutoRecoverPort | read-write | current | enable or disable auto recovery of port from action taken by cp-limit, link flap or loop detect features |
| 1.3.6.1.4.1.2272.1.4.10.1.1.65 | ColumnrcPortExtCplimitConf | read-write | current | Indicates the port configuration for extended CP-LIMIT |
| 1.3.6.1.4.1.2272.1.4.10.1.1.66 | ColumnrcPortExtCplimitUtilRate | read-write | current | Threshold for Ingress traffic utilization rate of the port for extended CP-LIMIT |
| 1.3.6.1.4.1.2272.1.4.10.1.1.67 | ColumnrcPortEgressRateLimit | read-write | current | Egress Rate Limit. 0 means disabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.68 | ColumnrcPortEgressRateLimitState | read-write | current | Used to enable/disable shape/egress-rate-limit functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.69 | ColumnrcPortBpduFilteringTimerCount | read-only | obsolete | The remaining time the port will be disabled due to a BPDU received when BPDU filtering is enabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.70 | ColumnrcPortBpduFilteringTimeout | read-write | obsolete | The time the port will be disabled when a BPDU is received when BPDU filtering is enabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.71 | ColumnrcPortBpduFilteringAdminEnabled | read-write | obsolete | Used to enable/disable BPDU filtering. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.72 | ColumnrcPortBpduFilteringOperEnabled | read-only | obsolete | Indicates whether BPDU filtering is actually enabled or disabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.73 | ColumnrcPortQinqEtherType | read-write | current | The qinq ether type value. It is hex value. It should be displayed and input as Hex value. It is only be used when port is associated with QnQ service UNI. Oth… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.74 | ColumnrcPortTrustDscp | read-write | current | Used to enable/disable the trusted DSCP feature. If enabled, the internal qos-level and 802.1p value are derived from the received packet's DSCP value. This MI… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.75 | ColumnrcPortCpLimitEnable | read-write | current | Used to enable/disable the control packet rate limit. Specifies whether or not rate limiting is currently in operation for multicast and broadcast packets for … |
| 1.3.6.1.4.1.2272.1.4.10.1.1.76 | ColumnrcPortCpMulticastLimit | read-write | current | Used to limit Multicast traffic on the specified port. Sets the limit in packets per second. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.77 | ColumnrcPortCpBroadcastLimit | read-write | current | Used to limit Broadcast traffic on the specified port. Sets the limit in packets per second. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.78 | ColumnrcPortSmartAutoNegotiate | read-write | current | This object indicates whether 'smart' autonegotiation is enabled on a port (smart autonegotiation indicates that the port can sense whether its partner has aut… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.79 | ColumnrcPortMepList | read-write | current | List of Meps assigned to this entry. A mep is consist of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.' A list of mep is consist o… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.80 | ColumnrcPortNumOfMep | read-only | current | Used to indicate the number of Meps is assigned to this entry |
| 1.3.6.1.4.1.2272.1.4.10.1.1.81 | ColumnrcPortAdacStatus | read-write | current | If enabled, the Nortel IP phones connected to the port will be configured in the voice VLAN. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.82 | ColumnrcPortPvid | read-write | current | A port Vlan Id associates with ESM and RModule port for OEL2/MIM traffic |
| 1.3.6.1.4.1.2272.1.4.10.1.1.83 | ColumnrcPortTdp | read-write | current | This attribute allows to Enable/Disable Transparent Domain Protocol at the port level on the ESM and Power Ranger Card. For the TDP packet to go out on the por… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.84 | ColumnrcPortClockSource | read-write | current | Indicates this port's current WAN clock source. Valid for 10 GE WAN only |
| 1.3.6.1.4.1.2272.1.4.10.1.1.85 | ColumnrcPortIngressRateLimit | read-write | current | Limits the amount of traffic from this Ingress port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.86 | ColumnrcPortIngressRateLimitState | read-write | current | Used to enable/disable police/ingress-rate-limit functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.87 | ColumnrcPortVrfIdList | read-only | current | The set of VRF ids to which this port belongs. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.88 | ColumnrcPortCfmVid | read-write | current | CFM default port vid |
| 1.3.6.1.4.1.2272.1.4.10.1.1.89 | ColumnrcPortUserLabel1 | read-write | current | User provided field. Used to give extra management information/data |
| 1.3.6.1.4.1.2272.1.4.10.1.1.90 | ColumnrcPortUserLabel2 | read-write | current | User provided additional field. Used to give extra management information/data |
| 1.3.6.1.4.1.2272.1.4.10.1.1.91 | ColumnrcPortClearCfmStats | read-write | current | To clear the port counter |
| 1.3.6.1.4.1.2272.1.4.10.1.1.92 | ColumnrcPortInterfaceType | read-write | current | This value indicates whether a port is of type <normal/si lent/uni>. A port can be included in any EVPN service only if this attribute is set to uni. If the po… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.93 | ColumnrcPortCfmControlMep | read-write | current | MEP assigned for CFM Control. A mep consists of <md>.<ma>.<mep_id>. Domain Name, Association and Mep Id is separated by '.' |
| 1.3.6.1.4.1.2272.1.4.10.1.1.94 | ColumnrcPortMtu | read-write | current | Port Mtu |
| 1.3.6.1.4.1.2272.1.4.10.1.1.95 | ColumnrcPortMtuState | read-write | current | Used to enable/disable Port Mtu functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.96 | ColumnrcPortVrfNameList | read-only | current | The set of VRF names to which this port belongs. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.97 | ColumnrcPortBrouterVrfId | read-write | current | Gives the VRF Id for this Brouter port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.98 | ColumnrcPortBrouterVrfName | read-only | current | Gives the VRF Name for this Brouter port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.99 | ColumnrcPortVrfCount | read-only | current | The total number of VRFs this port is associated to. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.100 | ColumnrcPortCtrlPktDropLimitEnable | read-write | current | Used to enable/disable Control Packets Drop Rate Limiter functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.101 | ColumnrcPortCtrlPktDropLimit | read-write | current | Indicates the Control Packet drop rate limit value |
| 1.3.6.1.4.1.2272.1.4.10.1.1.102 | ColumnrcPortCtrlPktShutdownLimitEnable | read-write | current | Used to enable/disable Control Packets Shutdown Rate Limiter functionality. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.103 | ColumnrcPortCtrlPktShutdownLimit | read-write | current | Indicates the Control Packet shutdown rate Limit value |
| 1.3.6.1.4.1.2272.1.4.10.1.1.104 | ColumnrcPortCtrlPktShutdownRtExceeded | read-write | current | Indicates if the Shutdown rate has been exceeded on the port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.105 | ColumnrcPortCtrlPktDropRtExceeded | read-write | current | Indicates if the Drop rate has been exceeded on the port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.106 | ColumnrcPortDhcpOption82SubscriberId | read-write | current | This object contains the DHCP option 82 subscriber ID string to be used in sub-option 6. If the value is an empty string, then sub-option 6 is not included in … |
| 1.3.6.1.4.1.2272.1.4.10.1.1.107 | ColumnrcPortServiceCardType | read-only | current | Port Hardware type, which includes PowerRanger, ESM port and other |
| 1.3.6.1.4.1.2272.1.4.10.1.1.108 | ColumnrcPortIngressRatePeak | read-write | current | Peak rate limit for this port. 0 means disable. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.109 | ColumnrcPortIngressRateSvc | read-write | current | Service rate limit for this port. 0 means disable. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.110 | ColumnrcPortCpLimitPktRate | read-write | current | Used to limit Control packets on the port to qos-levels 6 and 7. Sets the limit in packets per second. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.111 | ColumnrcPortCpLimitShutDownEnable | read-write | current | Used to indicate if the port should be shutdown when the CpLimitPktRate is exceeded. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.112 | ColumnrcPortRmonEnable | read-write | current | Used to set Remote Monitoring enable/disable |
| 1.3.6.1.4.1.2272.1.4.10.1.1.113 | ColumnrcPortIpsecEnable | read-write | deprecated | Used to set IPSEC enable/disable. at place of this value use RcIpConfEntry for IPV4 and use RcIpv6InterfaceEntry for IPV6. This field changed to deprecated |
| 1.3.6.1.4.1.2272.1.4.10.1.1.114 | ColumnrcPortShutdownReason | read-only | current | The port shutdown can happen due to many reason. It indicates the reason for the port state change. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.115 | ColumnrcPortMdixMode | read-write | current | Defines the MDI crossover (MDIX) modes for the port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.116 | ColumnrcPortFlexUniEnable | read-write | current | Used to set Flex UNI enable/disable on port |
| 1.3.6.1.4.1.2272.1.4.10.1.1.117 | ColumnrcPortBpduGuardTimerCount | read-only | current | The remaining time the port will be disabled due to a BPDU received when BPDU guard is enabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.118 | ColumnrcPortBpduGuardTimeout | read-write | current | The time the port will be disabled when a BPDU is received when BPDU Guard is enabled. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.119 | ColumnrcPortBpduGuardAdminEnabled | read-write | current | Used to enable/disable BPDU guard. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.120 | ColumnrcPortLicenseControlStatus | read-only | current | This object show the license conrol status of a port. It is only applicable to a port which reuqires PORT license file to be adminstratively enabled (ifAdminSt… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.121 | ColumnrcPortTxFlowControl | read-write | current | Used to enable/disable Tx flow control. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.122 | ColumnrcPortTxFlowControlOperState | read-only | current | Used to indicate the Tx flow control operational state. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.123 | ColumnrcPortCarrierDelayEnable | read-write | current | Used to enable/disable carrier delay feature on this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.124 | ColumnrcPortCarrierDelayInterval | read-write | current | Used to configure the carrier delay interval in milliseconds on this port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.125 | ColumnrcPortForwardErrorCorrection | read-write | current | Forward error correction |
| 1.3.6.1.4.1.2272.1.4.10.1.1.126 | ColumnrcPortForwardErrorCorrectionApplicability | read-only | current | Object to inidcate the valid of object rcPortForwardErrorCorrection is applicable to this interface or not |
| 1.3.6.1.4.1.2272.1.4.10.1.1.127 | ColumnrcPortMacsecMKAProfileName | read-write | current | Associate the port to the MACSec mka profile |
| 1.3.6.1.4.1.2272.1.4.10.1.1.128 | ColumnrcPortOperAutoNegotiate | read-only | current | Indicate the operational state of auto negotiation. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.129 | ColumnrcPortOperForwardErrorCorrection | read-only | current | Indicate the operation value of Forward error correction. cl91 - when FEC is applicable, port is up and negotiated/admin config to CLAUSE91. cl108 - when FEC i… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.130 | ColumnrcPortAutoSense | read-write | current | Set the operation value of AutoSense configuration on port. disable - AutoSense is disabled. All configuration done by AutoSense (ZTF) will be erased/discarded… |
| 1.3.6.1.4.1.2272.1.4.10.1.1.131 | ColumnrcPortAutoSenseKeepAutoConfig | read-write | current | When set to true, all port configuration made by ZTF will be kept if AutoSense is disabled on port. |
| 1.3.6.1.4.1.2272.1.4.10.1.1.132 | ColumnrcPortCustomAutoNegAdOrigin | read-only | current | Indicates how the Custom Auto Negotiation Advertisements were configured. Supported values: config - set by user radius - set by radius atribute |
| 1.3.6.1.4.1.2272.1.4.10.1.1.133 | ColumnrcPortBpduGuardOrigin | read-only | current | Indicates how bpdu guard was configured. Supported values: config - set by user radius - set by radius atribute |
| 1.3.6.1.4.1.2272.1.4.10.1.1.134 | ColumnrcPortAutoSenseState | read-only | current | The state of the auto-sense port, when auto-sense is enabled |
| 1.3.6.1.4.1.2272.1.4.10.2 | TablercPortPcapTable | not-accessible | current | Port pcap Table |
| 1.3.6.1.4.1.2272.1.4.10.2.1 | RowrcPortPcapEntry | not-accessible | current | Entry containing pcap info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.2.1.1 | ColumnrcPortPcapIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.4.10.2.1.2 | ColumnrcPortPcapEnable | read-write | current | To enable pcap for the port |
| 1.3.6.1.4.1.2272.1.4.10.2.1.3 | ColumnrcPortPcapMode | read-write | current | Mode in which pcap is enabled |
| 1.3.6.1.4.1.2272.1.4.10.2.1.4 | ColumnrcPortPcapFilterListSize | read-only | current | Used to indicate the number of filter list(s) that are assigned to this port. |
| 1.3.6.1.4.1.2272.1.4.10.2.1.5 | ColumnrcPortPcapFilterList | read-write | current | Used to indicate zero or more filter lists that are associated with this port for pcap. Each filter list identifier is stored as two bytes in this array starti… |
| 1.3.6.1.4.1.2272.1.4.10.2.1.6 | ColumnrcPortPcapAclFilterListSize | read-only | current | Used to indicate the number of ACL filter(s) that are assigned to this port which has mirror set as global-action. |
| 1.3.6.1.4.1.2272.1.4.10.2.1.7 | ColumnrcPortPcapAclFilterList | read-write | current | Used to indicate zero or more ACL filter lists that are associated with this port for pcap (has mirror set as global-action). Each ACL filter list identifier i… |
| 1.3.6.1.4.1.2272.1.4.10.3 | NodercPortPoe | |||
| 1.3.6.1.4.1.2272.1.4.10.3.1 | TablercPortPoePseIndexTable | not-accessible | current | Port table |
| 1.3.6.1.4.1.2272.1.4.10.3.1.1 | RowrcPortPoePseIndexEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.3.1.1.1 | ColumnrcPortPoePseIndexIfIndex | read-only | current | An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface a… |
| 1.3.6.1.4.1.2272.1.4.10.3.1.1.2 | ColumnrcPortPoePseIndexGroupIndex | read-only | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.1.1.3 | ColumnrcPortPoePseIndexPortIndex | read-only | current | This variable uniquely identifies the power Ethernet PSE port within group rcPoePseGroupIndex to which the power Ethernet PSE entry is connected. |
| 1.3.6.1.4.1.2272.1.4.10.3.2 | TablercPortPoeMainPseExtnTable | not-accessible | current | Port table |
| 1.3.6.1.4.1.2272.1.4.10.3.2.1 | RowrcPortPoeMainPseExtnEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.3.2.1.1 | ColumnrcPortPoeMainPseExtnGroupIndex | read-only | current | An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface a… |
| 1.3.6.1.4.1.2272.1.4.10.3.2.1.2 | ColumnrcPortPoeMainPseExtnPwrAdmin | read-write | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.2.1.3 | ColumnrcPortPoeMainPseExtnPwrPriority | read-write | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.2.1.4 | ColumnrcPortPoeMainPseExtnDeviceDetectType | read-write | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.2.1.5 | ColumnrcPortPoeMainPseExtnPwrLimit | read-write | current | The maximum available PoE power of the main PSE expressed in Watts. |
| 1.3.6.1.4.1.2272.1.4.10.3.3 | TablercPortPoePsePortExtnTable | not-accessible | current | Port table |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1 | RowrcPortPoePsePortExtnEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1.1 | ColumnrcPortPoePsePortExtnGroupIndex | read-only | current | An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface a… |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1.2 | ColumnrcPortPoePsePortExtnPortIndex | read-only | current | An index value that uniquely identifies an interface to a PSE port device. The interface identified by a particular value of this index is the same interface a… |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1.3 | ColumnrcPortPoePsePortExtnPwrLimit | read-write | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1.4 | ColumnrcPortPoePsePortExtnMeasuredVolt | read-only | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1.5 | ColumnrcPortPoePsePortExtnMeasuredCurrent | read-only | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.3.3.1.6 | ColumnrcPortPoePsePortExtnPwrConsumpt | read-only | current | An index value that uniquely identifies the group containing the port to which a power Etherenet PSE is connected. Group means box in the stack, module in a ra… |
| 1.3.6.1.4.1.2272.1.4.10.4 | TablercPortLacpTable | not-accessible | current | Port LACP table |
| 1.3.6.1.4.1.2272.1.4.10.4.1 | RowrcPortLacpEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.4.1.1 | ColumnrcPortLacpAdminEnable | read-write | current | Administratively enable/disable LACP on a port |
| 1.3.6.1.4.1.2272.1.4.10.4.1.2 | ColumnrcPortLacpOperEnable | read-only | current | Indicates if LACP is operationally enabled or disabled on a port |
| 1.3.6.1.4.1.2272.1.4.10.4.1.3 | ColumnrcPortLacpFastPeriodicTime | read-write | current | The number of miliseconds between periodic transmissions using Short Timeouts. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.4 | ColumnrcPortLacpSlowPeriodicTime | read-write | current | The number of miliseconds between periodic transmissions using LONG Timeouts. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.5 | ColumnrcPortLacpTimeoutScale | read-write | current | Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale |
| 1.3.6.1.4.1.2272.1.4.10.4.1.6 | ColumnrcPortLacpAggrWaitTime | read-write | current | The number of mili seconds to delay aggregation to allow multiple links to aggregate simultaneously. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.7 | ColumnrcPortLacpFastPeriodicTimeOper | read-only | current | The operating value of fast periodic timer on the port. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.8 | ColumnrcPortLacpSlowPeriodicTimeOper | read-only | current | The operating value of slow periodic timer on the port. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.9 | ColumnrcPortLacpTimeoutScaleOper | read-only | current | The operating value of timeout scale on the port. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.10 | ColumnrcPortLacpAggrWaitTimeOper | read-only | current | The operating value of aggreagate wait time on port. |
| 1.3.6.1.4.1.2272.1.4.10.4.1.11 | ColumnrcPortLacpSuppressMisConfigLog | read-write | current | Enable/Disable Suppression of misconfiguration logs. |
| 1.3.6.1.4.1.2272.1.4.10.5 | TablercPortVLacpTable | not-accessible | current | Port Virtual LACP table |
| 1.3.6.1.4.1.2272.1.4.10.5.1 | RowrcPortVLacpEntry | not-accessible | current | Entry containing info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.5.1.1 | ColumnrcPortVLacpAdminEnable | read-write | current | Administratively enable/disable Virtual LACP on a port |
| 1.3.6.1.4.1.2272.1.4.10.5.1.2 | ColumnrcPortVLacpOperEnable | read-only | current | Indicates if Virtual LACP is operationally enabled or disabled on a port |
| 1.3.6.1.4.1.2272.1.4.10.5.1.3 | ColumnrcPortVLacpFastPeriodicTimer | read-write | current | The number of miliseconds between periodic transmissions using Short Timeouts |
| 1.3.6.1.4.1.2272.1.4.10.5.1.4 | ColumnrcPortVLacpSlowPeriodicTimer | read-write | current | The number of miliseconds between periodic transmissions using LONG Timeouts. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.5 | ColumnrcPortVLacpTimeout | read-write | current | Timeout control value. Long or Short Timeout |
| 1.3.6.1.4.1.2272.1.4.10.5.1.6 | ColumnrcPortVLacpTimeoutScale | read-write | current | Scalar value used to calculate timeout time from periodic time. Timeout = PeriodicTime * TimeoutScale |
| 1.3.6.1.4.1.2272.1.4.10.5.1.7 | ColumnrcPortVLacpEtherType | read-write | current | VLACP Protocol Identification. The id value is in Hex |
| 1.3.6.1.4.1.2272.1.4.10.5.1.8 | ColumnrcPortVLacpEtherMacAddress | read-write | current | Multicast Mac Address exclusively used for VLACPDU's |
| 1.3.6.1.4.1.2272.1.4.10.5.1.9 | ColumnrcPortVLacpPortState | read-only | current | Display the Vlacp Port State. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.10 | ColumnrcPortVLacpDualHomingEnable | read-write | current | Enable/Disable Dual homing on Virtual LACP on a port |
| 1.3.6.1.4.1.2272.1.4.10.5.1.11 | ColumnrcPortVLacpFlapDetectEnable | read-write | current | Administratively enable/disable VLACP flap detect on a port. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.12 | ColumnrcPortVLacpFlapFrequency | read-write | current | The number of VLACP flaps on a port. If they occur within rcPortVLacpFlapInterval seconds, the port is shutdown. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.13 | ColumnrcPortVLacpFlapInterval | read-write | current | The time interval in seconds within which VLACP flaps on a port are monitored. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.14 | ColumnrcPortVLacpTotalFlapCount | read-only | current | The total number of VLACP flaps detected on this port since either enabling VLACP or clearing the counter. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.15 | ColumnrcPortVLacpFirstFlapTimeStamp | read-only | current | Timestamp for the first VLACP flap detected on this port since either enabling VLACP or clearing the timer. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.16 | ColumnrcPortVLacpLastFlapTimeStamp | read-only | current | Timestamp for the last VLACP flap detected on this port since either enabling VLACP or clearing the timer. |
| 1.3.6.1.4.1.2272.1.4.10.5.1.17 | ColumnrcPortVLacpFlapClearStats | read-write | current | Clear VLACP Flap counters and timers. |
| 1.3.6.1.4.1.2272.1.4.10.6 | TablercPortRemoteMirroringTable | not-accessible | current | Port Remote Mirroring Table |
| 1.3.6.1.4.1.2272.1.4.10.6.1 | RowrcPortRemoteMirroringEntry | not-accessible | current | Entry containing remote mirroring info. for a particular port |
| 1.3.6.1.4.1.2272.1.4.10.6.1.1 | ColumnrcPortRemoteMirroringIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.4.10.6.1.2 | ColumnrcPortRemoteMirroringEnable | read-create | current | To enable remote Mirroring for the port |
| 1.3.6.1.4.1.2272.1.4.10.6.1.3 | ColumnrcPortRemoteMirroringMode | read-create | current | Mode in which remote mirroring is enabled |
| 1.3.6.1.4.1.2272.1.4.10.6.1.4 | ColumnrcPortRemoteMirroringSrcMac | read-create | current | Source Mac of the remote mirrored packet. Remote mirroring packet will be send with this source mac address |
| 1.3.6.1.4.1.2272.1.4.10.6.1.5 | ColumnrcPortRemoteMirroringDstMac | read-create | current | Destination Mac of the remote mirrored packet. Packets will be bridged to this mac address. Remote mirroring packet will be send to this mac address |
| 1.3.6.1.4.1.2272.1.4.10.6.1.6 | ColumnrcPortRemoteMirroringEtherType | read-create | current | Ethertype of the remote mirrored packet. Packets will be send with this ethertype |
| 1.3.6.1.4.1.2272.1.4.10.6.1.7 | ColumnrcPortRemoteMirroringVlanIdListSize | read-only | current | Used to indicate the number of VLAN IDs that are assigned to this port. |
| 1.3.6.1.4.1.2272.1.4.10.6.1.8 | ColumnrcPortRemoteMirroringVlanIdList | read-create | current | This field is used only if the port is assigned as remote mirroring termination port. Represents zero or more filter lists vlan in which the Destination Mac ad… |
| 1.3.6.1.4.1.2272.1.4.10.6.1.9 | ColumnrcPortRemoteMirroringRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.2272.1.4.10.7 | TablercPortVlacpSessionTable | not-accessible | current | A table used to maintain Vlacp session values. |
| 1.3.6.1.4.1.2272.1.4.10.7.1 | RowrcPortVlacpSessionEntry | not-accessible | current | Entry containing Vlacp Session information regarding a particular port or mlt. |
| 1.3.6.1.4.1.2272.1.4.10.7.1.1 | ColumnrcPortVlacpSessionIfIndex | not-accessible | current | IfIndex of the port or Mlt |
| 1.3.6.1.4.1.2272.1.4.10.7.1.2 | ColumnrcPortVlacpSessionSesNumber | not-accessible | current | Session number of an IfIndex |
| 1.3.6.1.4.1.2272.1.4.10.7.1.3 | ColumnrcPortVlacpSessionSrcMacAddress | read-only | current | Mac Address for the session |
| 1.3.6.1.4.1.2272.1.4.10.7.1.4 | ColumnrcPortVlacpSessionRxTimer | read-only | current | The Rx timer for the session |
| 1.3.6.1.4.1.2272.1.4.10.7.1.5 | ColumnrcPortVlacpSessionValidbit | read-only | current | The valid bit for the session |
| 1.3.6.1.4.1.2272.1.4.10.7.1.6 | ColumnrcPortVlacpSessionInPktCount | read-only | current | The In packet count for the session |
| 1.3.6.1.4.1.2272.1.4.10.8 | TablercPortMgmtLinkTable | not-accessible | current | Port card mgmt port link table |
| 1.3.6.1.4.1.2272.1.4.10.8.1 | RowrcPortMgmtLinkEntry | not-accessible | current | Entry containing info. for a particular mgmt port in I/O card |
| 1.3.6.1.4.1.2272.1.4.10.8.1.1 | ColumnrcPortMgmtLinkIndex | read-only | current | IfIndex of the port. |
| 1.3.6.1.4.1.2272.1.4.10.8.1.2 | ColumnrcPortMgmtLinkDescr | read-only | current | Port description |
| 1.3.6.1.4.1.2272.1.4.10.8.1.3 | ColumnrcPortMgmtLinkOperStatus | read-only | current | admin status of the mgmt port |
| 1.3.6.1.4.1.2272.1.4.10.8.1.4 | ColumnrcPortMgmtLinkAutoNegotiate | read-only | current | Auto-negotiation status of the port |
| 1.3.6.1.4.1.2272.1.4.10.8.1.5 | ColumnrcPortMgmtLinkDuplex | read-only | current | duplex setting for the port |
| 1.3.6.1.4.1.2272.1.4.10.8.1.6 | ColumnrcPortMgmtLinkSpeed | read-only | current | speed setting for this port. |
| 1.3.6.1.4.1.2272.1.4.10.9 | TablercPortFlushFdbTable | not-accessible | current | Port Flush Fdbtable |
| 1.3.6.1.4.1.2272.1.4.10.9.1 | RowrcPortFlushFdbEntry | not-accessible | current | port based deletion of mac addresses learned or discarded on that port |
| 1.3.6.1.4.1.2272.1.4.10.9.1.1 | ColumnrcPortFlushFdbAddress | read-write | current | Mac Address to be deleted. |
| 1.3.6.1.4.1.2272.1.4.10.9.1.2 | ColumnrcPortFlushFdbVlanId | read-write | current | vlan Id associated with the Mac Address |
| 1.3.6.1.4.1.2272.1.4.10.10 | TablercPortRemotePortShutdownTable | not-accessible | current | A list of RemotePortShutdown port info. |
| 1.3.6.1.4.1.2272.1.4.10.10.1 | RowrcPortRemotePortShutdownEntry | not-accessible | current | A RemotePortShutdown table entry. |
| 1.3.6.1.4.1.2272.1.4.10.10.1.1 | ColumnrcPortRemotePortShutdownIfIndex | not-accessible | current | The ifIndex value for a port. |
| 1.3.6.1.4.1.2272.1.4.10.10.1.2 | ColumnrcPortRemotePortShutdownEnabled | read-write | current | This object controls whether the Remote-Port-Shutdown feature is enabled or disabled on a port. |
| 1.3.6.1.4.1.2272.1.4.10.10.1.3 | ColumnrcPortRemotePortShutdownHoldTimer | read-write | current | Indicates the time period after a port has been shutdown during which it will remain down, regardless of any CCMs received during that time period. |
| 1.3.6.1.4.1.2272.1.4.10.10.1.4 | ColumnrcPortRemotePortShutdownStatus | read-only | current | This object indicates whether a port is shutdown by the remote port shutdown feature. |
| 1.3.6.1.4.1.2272.1.4.10.10.1.5 | ColumnrcPortRemotePortShutdownLocalMacAddress | read-only | current | Local MAC address. |
| 1.3.6.1.4.1.2272.1.4.10.10.1.6 | ColumnrcPortRemotePortShutdownRemoteMacAddress | read-only | current | Remote MAC address. |
| 1.3.6.1.4.1.2272.1.4.10.11 | TablercPortFlushMacTable | not-accessible | current | Flush MAC entry on a port. |
| 1.3.6.1.4.1.2272.1.4.10.11.1 | RowrcPortFlushMacEntry | not-accessible | current | Port mac flush table entry. |
| 1.3.6.1.4.1.2272.1.4.10.11.1.1 | ColumnrcPortFlushMacPortNum | not-accessible | current | Port number where the mac record exists. |
| 1.3.6.1.4.1.2272.1.4.10.11.1.2 | ColumnrcPortFlushMacAddr | read-write | current | Mac Address that needs to be removed. |
| 1.3.6.1.4.1.2272.1.4.10.11.1.3 | ColumnrcPortFlushMacVlanId | read-write | current | Vlan Id associated with the Mac Address. |
| 1.3.6.1.4.1.2272.1.4.10.12 | TablercLldpXMedLocMediaPolicyTable | not-accessible | current | This table contains one row per policy type per port of media policy information (as a part of the MED organizational extension) on the local system known to t… |
| 1.3.6.1.4.1.2272.1.4.10.12.1 | RowrcLldpXMedLocMediaPolicyEntry | not-accessible | current | Information about a particular policy on a specific port component. |
| 1.3.6.1.4.1.2272.1.4.10.12.1.1 | ColumnrcLldpXMedLocMediaPolicyPortNum | not-accessible | current | . |
| 1.3.6.1.4.1.2272.1.4.10.12.1.2 | ColumnrcLldpXMedLocMediaPolicyAppType | not-accessible | current | The media type that defines the primary function of the application for the policy advertised by an endpoint. |
| 1.3.6.1.4.1.2272.1.4.10.12.1.3 | ColumnrcLldpXMedLocMediaPolicyVlanID | read-create | current | An extension of the VLAN Identifier for the port, as defined in IEEE 802.1P-1998. A value of 1 through 4094 is used to define a valid PVID. A value of 0 shall … |
| 1.3.6.1.4.1.2272.1.4.10.12.1.4 | ColumnrcLldpXMedLocMediaPolicyPriority | read-create | current | This object contains the value of the 802.1p priority which is associated with the given port on the local system. |
| 1.3.6.1.4.1.2272.1.4.10.12.1.5 | ColumnrcLldpXMedLocMediaPolicyDscp | read-create | current | This object contains the value of the Differentiated Service Code Point (DSCP) as defined in IETF RFC 2474 and RFC 2475 which is associated with the given port… |
| 1.3.6.1.4.1.2272.1.4.10.12.1.6 | ColumnrcLldpXMedLocMediaPolicyUnknown | read-create | current | A value of 'true' indicates that the network policy for the specified application type is currently unknown. In this case, the VLAN ID, the layer 2 priority an… |
| 1.3.6.1.4.1.2272.1.4.10.12.1.7 | ColumnrcLldpXMedLocMediaPolicyTagged | read-create | current | A value of 'true' indicates that the application is using a tagged VLAN. A value of 'false' indicates that for the specific application the device either is us… |
| 1.3.6.1.4.1.2272.1.4.10.12.1.8 | ColumnrcLldpXMedLocMediaPolicyRowStatus | read-create | current | Used to create/delete entries. |
| 1.3.6.1.4.1.2272.1.4.10.13 | TablercPortLosslessEnetTable | not-accessible | current | Port Lossless Ethernet Table |
| 1.3.6.1.4.1.2272.1.4.10.13.1 | RowrcPortLosslessEnetEntry | not-accessible | current | Entry containing lossless Ethernet information for a particular port. |
| 1.3.6.1.4.1.2272.1.4.10.13.1.1 | ColumnrcPortLosslessEnetIndex | not-accessible | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. Lossless Ethernet will be limited to 10Gig ports. |
| 1.3.6.1.4.1.2272.1.4.10.13.1.2 | ColumnrcPortLosslessEnetConfigured | read-write | current | To enable lossless mode for the port |
| 1.3.6.1.4.1.2272.1.4.10.13.1.3 | ColumnrcPortLosslessEnetPauseType | read-write | current | Pause frame type. fc - Pause, pfc - priority-based flow control. |
| 1.3.6.1.4.1.2272.1.4.10.13.1.4 | ColumnrcPortLosslessEnetPfcBandwidth | read-write | current | Guaranteed bandwidth in Gbps when rcPortLosslessEnetPauseType is set to pfc(2). |
| 1.3.6.1.4.1.2272.1.4.10.14 | TablercChannelizedPortTable | not-accessible | current | Port table for all channelized capable ports. |
| 1.3.6.1.4.1.2272.1.4.10.14.1 | RowrcChannelizedPortEntry | not-accessible | current | Entry containing info for a key port of channelized capable port. |
| 1.3.6.1.4.1.2272.1.4.10.14.1.1 | ColumnrcChannelizedPortIndex | not-accessible | current | An index value that uniquely identifies a port which is channelized capable. |
| 1.3.6.1.4.1.2272.1.4.10.14.1.2 | ColumnrcChannelizedPortChannelType | read-only | current | port channelized type. Either 40G or 100G. |
| 1.3.6.1.4.1.2272.1.4.10.14.1.3 | ColumnrcChannelizedPortAdminMode | read-write | current | Administratively enable/disable the port channelized mode. |
| 1.3.6.1.4.1.2272.1.4.10.15 | TablercPortExtendTable | not-accessible | current | Port extend table. |
| 1.3.6.1.4.1.2272.1.4.10.15.1 | RowrcPortExtendEntry | not-accessible | current | Entry containing info for a key port. |
| 1.3.6.1.4.1.2272.1.4.10.15.1.1 | ColumnrcPortExtendPortDisplayFormat | read-only | current | The port format to display. |
| 1.3.6.1.4.1.2272.1.4.10.16 | TablercPortVlacpStatsTable | not-accessible | current | A table that contains VLACP information about every port that is associated with this device. A row appears in this table for each physical port. |
| 1.3.6.1.4.1.2272.1.4.10.16.1 | RowrcPortVlacpStatsEntry | not-accessible | current | A list of Virtual Link Aggregation Control Protocol statistics for each port on this device. |
| 1.3.6.1.4.1.2272.1.4.10.16.1.1 | ColumnrcPortVlacpIndex | not-accessible | current | The ifIndex of VLACP ports |
| 1.3.6.1.4.1.2272.1.4.10.16.1.2 | ColumnrcPortVlacpStatsLACPDUsRx | read-only | current | The number of valid VLACPDUs received on this Aggregation Port. This value is read-only. |
| 1.3.6.1.4.1.2272.1.4.10.16.1.3 | ColumnrcPortVlacpStatsLACPDUsTx | read-only | current | The number of VLACPDUs transmitted on this Aggregation Port. This value is read-only. |
| 1.3.6.1.4.1.2272.1.4.10.16.1.4 | ColumnrcPortVlacpStatsLACPDUsMismatch | read-only | current | The number of mismatched VLACPDUs in terms of seq-num RX'ed on this Port. This value is read-only. |
| 1.3.6.1.4.1.2272.1.4.11 | NodercPortLock | |||
| 1.3.6.1.4.1.2272.1.4.11.1 | ScalarrcPortLockEnable | read-write | current | Indicate whether the port lock feature is enabled. |
| 1.3.6.1.4.1.2272.1.4.11.2 | ScalarrcPortLockLockedPorts | read-write | current | The set of ports that are administratively locked. Locked ports cannot be modified in anyway until the port is unlocked first. |
| 1.3.6.1.4.1.2272.1.11.1 | TablercTestExtTable | not-accessible | current | Test extension table. This table augments the standard ifTestTable table in RFC1573. |
| 1.3.6.1.4.1.2272.1.11.1.1 | RowrcTestEntry | not-accessible | current | Proprietary test variables. |
| 1.3.6.1.4.1.2272.1.11.1.1.1 | ColumnrcTestExtIfIndex | read-only | current | The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the … |
| 1.3.6.1.4.1.2272.1.11.1.1.2 | ColumnrcTestExtPassCount | read-only | current | The number of iterations of the test case that completed successfully. |
| 1.3.6.1.4.1.2272.1.11.1.1.3 | ColumnrcTestExtFailCount | read-only | current | The number of iterations of the test case that failed. |
| 1.3.6.1.4.1.2272.1.11.2 | NodercTestTypes | |||
| 1.3.6.1.4.1.2272.1.11.2.1 | NodercTestTypesFabric | |||
| 1.3.6.1.4.1.2272.1.11.2.2 | NodercTestTypesArTable | |||
| 1.3.6.1.4.1.2272.1.11.2.3 | NodercTestTypesExtLoopBack | |||
| 1.3.6.1.4.1.2272.1.11.3 | NodercTestCodes | |||
| 1.3.6.1.4.1.2272.1.11.3.1 | NodercTestCodesNoReceive | |||
| 1.3.6.1.4.1.2272.1.11.3.2 | NodercTestCodesBadSeq | |||
| 1.3.6.1.4.1.2272.1.11.3.3 | NodercTestCodesBadLen | |||
| 1.3.6.1.4.1.2272.1.11.3.4 | NodercTestCodesBadData | |||
| 1.3.6.1.4.1.2272.1.12.1 | TablercStatTable | not-accessible | current | A table used to store port statistics. |
| 1.3.6.1.4.1.2272.1.12.1.1 | RowrcStatEntry | not-accessible | current | interface counters |
| 1.3.6.1.4.1.2272.1.12.1.1.1 | ColumnrcStatPortIndex | read-only | current | An index value that uniquely identifies a port. This value is similar to ifIndex in MIB2. |
| 1.3.6.1.4.1.2272.1.12.1.1.2 | ColumnrcStatFrameTooShorts | read-only | current | The total number of frames that are too short that were encountered on this interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.3 | ColumnrcStatBridgeInUnicastFrames | read-only | current | The total number of incoming unicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.4 | ColumnrcStatBridgeInMulticastFrames | read-only | current | The total number of incoming multicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.5 | ColumnrcStatBridgeInBroadcastFrames | read-only | current | The total number of incoming broadcast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.6 | ColumnrcStatBridgeInDiscards | read-only | current | The total number of frames that were discarded by the bridging entity. |
| 1.3.6.1.4.1.2272.1.12.1.1.7 | ColumnrcStatBridgeOutUnicastFrames | read-only | current | The total number of outgoing unicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.8 | ColumnrcStatBridgeOutMulticastFrames | read-only | current | The total number of outgoing multicast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.9 | ColumnrcStatBridgeOutBroadcastFrames | read-only | current | The total number of outgoing broadcast frames that were bridged. |
| 1.3.6.1.4.1.2272.1.12.1.1.10 | ColumnrcStatRouteInUnicastFrames | read-only | current | The total number of incoming unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.12.1.1.11 | ColumnrcStatRouteInMulticastFrames | read-only | current | The total number of incoming multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.12.1.1.12 | ColumnrcStatRouteInDiscards | read-only | current | The total number of frames that were discarded by the routing entity. |
| 1.3.6.1.4.1.2272.1.12.1.1.13 | ColumnrcStatRouteOutUnicastFrames | read-only | current | The total number of outgoing unicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.12.1.1.14 | ColumnrcStatRouteOutMulticastFrames | read-only | current | The total number of outgoing multicast frames that were routed. |
| 1.3.6.1.4.1.2272.1.12.1.1.15 | ColumnrcStatStgForwardTransitions | read-only | current | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.2272.1.12.1.1.16 | ColumnrcStatStgInConfigBpdus | read-only | current | Received Config BPDUs |
| 1.3.6.1.4.1.2272.1.12.1.1.17 | ColumnrcStatStgInTcnBpdus | read-only | current | Received TCN BPDUs |
| 1.3.6.1.4.1.2272.1.12.1.1.18 | ColumnrcStatStgInBadBpdus | read-only | current | Received bad BPDUs |
| 1.3.6.1.4.1.2272.1.12.1.1.19 | ColumnrcStatStgOutConfigBpdus | read-only | current | Transmitted config BPDUs |
| 1.3.6.1.4.1.2272.1.12.1.1.20 | ColumnrcStatStgOutTcnBpdus | read-only | current | Transmitted TCN BPDUs |
| 1.3.6.1.4.1.2272.1.12.1.1.21 | ColumnrcStatBridgeOutFrames | read-only | current | Used by the Accelar 8000 product family to account for all transmitted bridge unicast, broadcast, and multicast packets. The individual counters are not suppor… |
| 1.3.6.1.4.1.2272.1.12.1.1.22 | ColumnrcStatPbtUnknownDropCount | read-only | current | Count of PBT packets dropped due to unknown destination MAC |
| 1.3.6.1.4.1.2272.1.12.1.1.23 | ColumnrcStatCtrlPktRtLimitTotalCnt | read-only | current | Total count of control packets that is passed for rate limiting |
| 1.3.6.1.4.1.2272.1.12.1.1.24 | ColumnrcStatCtrlPktRtLimitDropCnt | read-only | current | Count of control packets dropped after rate limiting |
| 1.3.6.1.4.1.2272.1.12.1.1.25 | ColumnrcStatPolicerTotalBytes | read-only | current | The total number of bytes received on the interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.26 | ColumnrcStatPolicerTotalPkts | read-only | current | The total number of packets received on the interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.27 | ColumnrcStatPolicerGreenBytes | read-only | current | The total number of bytes received on the interface that were below the committed rate. |
| 1.3.6.1.4.1.2272.1.12.1.1.28 | ColumnrcStatPolicerYellowBytes | read-only | current | The total number of bytes received on the interface that were above the committed rate but below the peak rate. |
| 1.3.6.1.4.1.2272.1.12.1.1.29 | ColumnrcStatPolicerRedBytes | read-only | current | The total number of bytes received on the interface that were above the peak rate. |
| 1.3.6.1.4.1.2272.1.12.1.1.30 | ColumnrcStatRateLimitDropPktRate | read-only | current | The total number of packets dropped per second on the interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.31 | ColumnrcStatRateLimitDropByteRate | read-only | current | The total number of bytes dropped per second on the interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.32 | ColumnrcStatRateLimitDropTotalBytes | read-only | current | The total number of bytes dropped on the interface. |
| 1.3.6.1.4.1.2272.1.12.1.1.33 | ColumnrcStatRateLimitDropTotalPkts | read-only | current | The total number of packets dropped on the interface. |