ROUTING6-MIB
162 objects
The Quanta Private MIB for FastPath Ipv6 Routing
Imported Objects
| IPV6-TC | Ipv6Address Ipv6AddressIfIdentifier Ipv6AddressPrefix Ipv6IfIndex Ipv6IfIndexOrZero |
| OSPF-MIB | AreaID RouterID |
| OSPFV3-MIB | ospfv3AreaEntry ospfv3IfEntry ospfv3VirtIfEntry |
| QUANTA-SWITCH-MIB | switch |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress PhysAddress RowPointer RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7244.2.30 | IdentityroutingIpv6 | The Quanta Private MIB for FastPath Ipv6 Routing | ||
| 1.3.6.1.4.1.7244.2.30.1 | NodeagentIpv6Group | |||
| 1.3.6.1.4.1.7244.2.30.1.1 | ScalaragentIpv6RoutingMode | read-write | current | Administratively enables/disables ipv6 unicast routing on the switch. |
| 1.3.6.1.4.1.7244.2.30.1.2 | TableagentIpv6InterfaceTable | not-accessible | current | |
| 1.3.6.1.4.1.7244.2.30.1.2.1 | RowagentIpv6InterfaceEntry | not-accessible | current | |
| 1.3.6.1.4.1.7244.2.30.1.2.1.1 | ColumnagentIpv6InterfaceIfIndex | read-only | current | The IfIndex associated with this instance. |
| 1.3.6.1.4.1.7244.2.30.1.2.1.2 | ColumnagentIpv6InterfaceMtuValue | read-write | current | Configures the MTU value for this interface.If it is not yet configured, retrieving the value of this object results in a zero value. Setting the value zero to… |
| 1.3.6.1.4.1.7244.2.30.1.2.1.3 | ColumnagentIpv6InterfaceDadTransmits | read-write | current | Configures the dad transmits value for this interface. |
| 1.3.6.1.4.1.7244.2.30.1.2.1.4 | ColumnagentIpv6InterfaceLinkLocalOnly | read-write | current | When enabled, interface is capable of ipv6 operation without a global address. In this case, an eui-64 based link-local address is used. |
| 1.3.6.1.4.1.7244.2.30.1.2.1.5 | ColumnagentIpv6InterfaceIcmpUnreachables | read-write | current | If this object is enable, it indicates that ICMPv6 unreachables can be sent on this interface. |
| 1.3.6.1.4.1.7244.2.30.1.2.1.6 | ColumnagentIpv6InterfaceAutoconfig | read-write | current | If this object is enabled, it indicates that the IPv6 address is automatically generated using IPv6 stateless address auto configuration. |
| 1.3.6.1.4.1.7244.2.30.1.2.1.7 | ColumnagentIpv6InterfaceDhcpClient | read-write | current | If this object is enabled, the interface uses DHCPv6 Client protocol to acquire an IPv6 address. |
| 1.3.6.1.4.1.7244.2.30.1.3 | TableagentIpv6RouterAdvertisementTable | not-accessible | current | There is no global administrative flag for router advertisement. The global routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing is di… |
| 1.3.6.1.4.1.7244.2.30.1.3.1 | RowagentIpv6RouterAdvertisementEntry | not-accessible | current | |
| 1.3.6.1.4.1.7244.2.30.1.3.1.1 | ColumnagentIpv6RouterAdvertisementIfIndex | read-only | current | Interface Number to configure Router Advertisement on. |
| 1.3.6.1.4.1.7244.2.30.1.3.1.2 | ColumnagentIpv6RouterAdvertisementSuppressMode | read-write | current | Enable or disable router advertisement suppression on the interface. |
| 1.3.6.1.4.1.7244.2.30.1.3.1.3 | ColumnagentIpv6RouterAdvertisementMaxAdvertisementInterval | read-write | current | Maximum time allowed between sending router advertisements from the interface. (Max * 0.75 >= Min) |
| 1.3.6.1.4.1.7244.2.30.1.3.1.4 | ColumnagentIpv6RouterAdvertisementMinAdvertisementInterval | read-write | current | Mimimum time allowed between sending router advertisements from the interface. (Max * 0.75 >= Min) |
| 1.3.6.1.4.1.7244.2.30.1.3.1.5 | ColumnagentIpv6RouterAdvertisementAdvertisementLifetime | read-write | current | Value of lifetime field of router advertisement sent from the interface. This value must be greater than or equal to agentIpv6RouterAdvertisementMaxAdvertiseme… |
| 1.3.6.1.4.1.7244.2.30.1.3.1.6 | ColumnagentIpv6RouterAdvertisementNbrSolicitInterval | read-write | current | Value of retrans time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval. The valid value ran… |
| 1.3.6.1.4.1.7244.2.30.1.3.1.7 | ColumnagentIpv6RouterAdvertisementReachableTime | read-write | current | Value of reachable time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval. |
| 1.3.6.1.4.1.7244.2.30.1.3.1.8 | ColumnagentIpv6RouterAdvertisementManagedFlag | read-write | current | Value of managed config field of router advertisement sent from the interface. |
| 1.3.6.1.4.1.7244.2.30.1.3.1.9 | ColumnagentIpv6RouterAdvertisementOtherFlag | read-write | current | Value of other config field of router advertisement sent from the interface. |
| 1.3.6.1.4.1.7244.2.30.1.4 | TableagentIpv6AddrPrefixTable | not-accessible | current | The list of IPv6 address prefixes of IPv6 interfaces. |
| 1.3.6.1.4.1.7244.2.30.1.4.1 | RowagentIpv6AddrPrefixEntry | not-accessible | current | An interface entry containing objects of a particular IPv6 address prefix. |
| 1.3.6.1.4.1.7244.2.30.1.4.1.1 | ColumnagentIpv6AddrPrefix | not-accessible | current | The prefix associated with the this interface. |
| 1.3.6.1.4.1.7244.2.30.1.4.1.2 | ColumnagentIpv6AddrPrefixLength | not-accessible | current | The length of the prefix (in bits). |
| 1.3.6.1.4.1.7244.2.30.1.4.1.3 | ColumnagentIpv6AddrPrefixOnLinkFlag | read-write | current | This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise. |
| 1.3.6.1.4.1.7244.2.30.1.4.1.4 | ColumnagentIpv6AddrPrefixAutonomousFlag | read-write | current | Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a lo… |
| 1.3.6.1.4.1.7244.2.30.1.4.1.5 | ColumnagentIpv6AddrPrefixAdvPreferredLifetime | read-write | current | It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The addr… |
| 1.3.6.1.4.1.7244.2.30.1.4.1.6 | ColumnagentIpv6AddrPrefixAdvValidLifetime | read-write | current | It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address… |
| 1.3.6.1.4.1.7244.2.30.1.5 | TableagentIpv6AddrTable | not-accessible | current | The table of addressing information relevant to this node's interface addresses. |
| 1.3.6.1.4.1.7244.2.30.1.5.1 | RowagentIpv6AddrEntry | not-accessible | current | The addressing information for one of this node's interface addresses. |
| 1.3.6.1.4.1.7244.2.30.1.5.1.1 | ColumnagentIpv6AddrAddress | not-accessible | current | The IPv6 address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.7244.2.30.1.5.1.2 | ColumnagentIpv6AddrPfxLength | read-create | current | The length of the prefix (in bits) associated with the IPv6 address of this entry. |
| 1.3.6.1.4.1.7244.2.30.1.5.1.3 | ColumnagentIpv6AddrEui64Flag | read-create | current | This object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise. |
| 1.3.6.1.4.1.7244.2.30.1.5.1.4 | ColumnagentIpv6AddrStatus | read-create | current | Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. … |
| 1.3.6.1.4.1.7244.2.30.1.6 | TableagentIpv6StaticRouteTable | not-accessible | current | IPv6 Static Routing table. This table contains an entry for each valid IPv6 static unicast route that can be used for packet forwarding determination. |
| 1.3.6.1.4.1.7244.2.30.1.6.1 | RowagentIpv6StaticRouteEntry | not-accessible | current | A routing entry. |
| 1.3.6.1.4.1.7244.2.30.1.6.1.1 | ColumnagentIpv6StaticRouteDest | not-accessible | current | The destination IPv6 address of this route. This object may not take a Multicast address value. |
| 1.3.6.1.4.1.7244.2.30.1.6.1.2 | ColumnagentIpv6StaticRoutePfxLength | not-accessible | current | Indicates the prefix length of the destination address. |
| 1.3.6.1.4.1.7244.2.30.1.6.1.3 | ColumnagentIpv6StaticRouteIfIndex | not-accessible | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.7244.2.30.1.6.1.4 | ColumnagentIpv6StaticRouteNextHop | not-accessible | current | The address of the next system en route. |
| 1.3.6.1.4.1.7244.2.30.1.6.1.5 | ColumnagentIpv6StaticRoutePreference | read-create | current | The routing preference metric for this route. A lower value is more preferred. |
| 1.3.6.1.4.1.7244.2.30.1.6.1.6 | ColumnagentIpv6StaticRouteStatus | read-create | current | Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated route from t… |
| 1.3.6.1.4.1.7244.2.30.1.7 | NodeagentIpv6ServicePortGroup | |||
| 1.3.6.1.4.1.7244.2.30.1.7.1 | TableagentIpv6ServicePortPrefixTable | not-accessible | current | IPv6 Service Port Prefix Table. This table contains an entry for each valid IPv6 prefix configured on the Service Port. |
| 1.3.6.1.4.1.7244.2.30.1.7.1.1 | RowagentIpv6ServicePortPrefixEntry | not-accessible | current | An IPv6 Service Port Prefix entry. |
| 1.3.6.1.4.1.7244.2.30.1.7.1.1.1 | ColumnagentIpv6ServicePortPrefixIndex | not-accessible | current | The index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values to be reassigned. |
| 1.3.6.1.4.1.7244.2.30.1.7.1.1.2 | ColumnagentIpv6ServicePortPrefix | read-only | current | The Ipv6 Prefix Address configured on the Service Port. |
| 1.3.6.1.4.1.7244.2.30.1.7.1.1.3 | ColumnagentIpv6ServicePortPrefixLength | read-only | current | The length of the IPv6 Prefix Address. |
| 1.3.6.1.4.1.7244.2.30.1.7.2 | TableagentIpv6ServicePortDefaultRouterTable | not-accessible | current | IPv6 Service Port Default Router Table. This table contains an entry for each valid IPv6 Default Router configured on the Service Port. |
| 1.3.6.1.4.1.7244.2.30.1.7.2.1 | RowagentIpv6ServicePortDefaultRouterEntry | not-accessible | current | An IPv6 Service Port Default Router entry. |
| 1.3.6.1.4.1.7244.2.30.1.7.2.1.1 | ColumnagentIpv6ServicePortDefaultRouterIndex | not-accessible | current | The index of the IPv6 Default Router Address configured on the Service Port. Removal of a row will cause index values to be reassigned. |
| 1.3.6.1.4.1.7244.2.30.1.7.2.1.2 | ColumnagentIpv6ServicePortDefaultRouter | read-only | current | The Address of the IPv6 Default Router configured on the Service Port. |
| 1.3.6.1.4.1.7244.2.30.1.7.3 | TableagentIpv6ServicePortNbrTable | not-accessible | current | IPv6 Service Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Service Port. |
| 1.3.6.1.4.1.7244.2.30.1.7.3.1 | RowagentIpv6ServicePortNbrEntry | not-accessible | current | An IPv6 Service Port Neighbor entry. |
| 1.3.6.1.4.1.7244.2.30.1.7.3.1.1 | ColumnagentIpv6ServicePortNbrAddr | not-accessible | current | The Ipv6 Address of a neighbor switch visible to the Service Port. |
| 1.3.6.1.4.1.7244.2.30.1.7.3.1.2 | ColumnagentIpv6ServicePortNbrPhysAddr | read-only | current | The MacAddress of the neighboring switch. |
| 1.3.6.1.4.1.7244.2.30.1.7.3.1.3 | ColumnagentIpv6ServicePortNbrState | read-only | current | The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deleti… |
| 1.3.6.1.4.1.7244.2.30.1.7.3.1.4 | ColumnagentIpv6ServicePortNbrUpdated | read-only | current | The last sysUpTime that this neighbor has been updated. |
| 1.3.6.1.4.1.7244.2.30.1.7.3.1.5 | ColumnagentIpv6ServicePortNbrIsRouter | read-only | current | Returns true(1) if the neighbor machine is a router, false(2) otherwise. |
| 1.3.6.1.4.1.7244.2.30.1.7.4 | ScalaragentIpv6ServicePortConfigProtocol | read-write | current | The switch's ServicePort IPv6 config protocol |
| 1.3.6.1.4.1.7244.2.30.1.7.5 | ScalaragentIpv6ServicePortDhcpRestart | read-write | current | The switch's ServicePort IPv6 DHCP Restart |
| 1.3.6.1.4.1.7244.2.30.1.9 | NodeagentIpv6NeighborGroup | |||
| 1.3.6.1.4.1.7244.2.30.1.9.1 | TableagentIpv6NeighborTable | not-accessible | current | IPv6 Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured |
| 1.3.6.1.4.1.7244.2.30.1.9.1.1 | RowagentIpv6NeighborEntry | not-accessible | current | An IPv6 Neighbor entry. |
| 1.3.6.1.4.1.7244.2.30.1.9.1.1.1 | ColumnagentIpv6NeighborIfIndex | read-only | current | A unique non-zero value identifying the particular IPv6 interface. |
| 1.3.6.1.4.1.7244.2.30.1.9.1.1.2 | ColumnagentIpv6NeighborAddress | read-only | current | The Ipv6 Address of a neighbor switch visible |
| 1.3.6.1.4.1.7244.2.30.1.9.1.1.3 | ColumnagentIpv6NeighborMacAddress | read-only | current | The MacAddress of the neighboring switch. |
| 1.3.6.1.4.1.7244.2.30.1.9.1.1.4 | ColumnagentIpv6NeighborIsRouter | read-only | current | Returns true(1) if the neighbor machine is a router, false(2) otherwise. |
| 1.3.6.1.4.1.7244.2.30.1.9.1.1.5 | ColumnagentIpv6NeighborState | read-only | current | The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deleti… |
| 1.3.6.1.4.1.7244.2.30.1.9.1.1.6 | ColumnagentIpv6NeighborLastUpdated | read-only | current | The last sysUpTime that this neighbor has been updated. |
| 1.3.6.1.4.1.7244.2.30.1.9.2 | TableagentIpv6StaticNeighbor | not-accessible | current | IPv6 static Neighbor Table. This table contains an entry for each valid IPv6 static Neighbor configured |
| 1.3.6.1.4.1.7244.2.30.1.9.2.1 | RowagentIpv6StaticNeighborEntry | not-accessible | current | An IPv6 static Neighbor entry. |
| 1.3.6.1.4.1.7244.2.30.1.9.2.1.1 | ColumnagentIpv6StaticNeighborIfIndex | not-accessible | current | A unique non-zero value identifying the particular IPv6 interface. |
| 1.3.6.1.4.1.7244.2.30.1.9.2.1.2 | ColumnagentIpv6StaticNeighborAddress | read-only | current | The Ipv6 Address of a static neighbor switch visible |
| 1.3.6.1.4.1.7244.2.30.1.9.2.1.3 | ColumnagentIpv6StaticNeighborMacAddress | read-only | current | The MacAddress of the static neighboring switch. |
| 1.3.6.1.4.1.7244.2.30.1.9.3 | ScalaragentIpv6StaticNeighborRowAddress | read-write | current | The Ipv6 Address of a static neighbor switch visible |
| 1.3.6.1.4.1.7244.2.30.1.9.4 | ScalaragentIpv6StaticNeighborRowMacAddress | read-write | current | The MacAddress of the static neighboring switch. |
| 1.3.6.1.4.1.7244.2.30.1.9.5 | ScalaragentIpv6StaticNeighborRowStatus | read-write | current | Creates a new entry in the Neighbor table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated address fro… |
| 1.3.6.1.4.1.7244.2.30.1.10 | NodeagentIpv6IcmpControlGroup | |||
| 1.3.6.1.4.1.7244.2.30.1.10.1 | ScalaragentIpv6IcmpRateLimitInterval | read-write | current | Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit. |
| 1.3.6.1.4.1.7244.2.30.1.10.2 | ScalaragentIpv6IcmpRateLimitBurstSize | read-write | current | Specifies the number of tokens to be placed after timeout. |
| 1.3.6.1.4.1.7244.2.30.1.11 | TableagentDhcp6ClientParametersTable | not-accessible | current | Information about the DHCPv6 Client parameters on the interfaces. |
| 1.3.6.1.4.1.7244.2.30.1.11.1 | RowagentDhcp6ClientParametersEntry | not-accessible | current | DHCPv6 Client information on an interface. |
| 1.3.6.1.4.1.7244.2.30.1.11.1.1 | ColumnagentDhcp6ClientInterfaceIndex | read-only | current | The Interface index on which the IPv6 address is leased by the DHCPv6 Server. |
| 1.3.6.1.4.1.7244.2.30.1.11.1.2 | ColumnagentDhcp6ClientPrefix | read-only | current | The IPv6 Prefix leased by the DHCPv6 Server. |
| 1.3.6.1.4.1.7244.2.30.1.11.1.3 | ColumnagentDhcp6ClientPrefixlength | read-only | current | The Prefix length corresponding to the IPv6 Prefix leased by the DHCPv6 Server. |
| 1.3.6.1.4.1.7244.2.30.1.11.1.4 | ColumnagentDhcp6ClientState | read-only | current | The State of the DHCPv6 Client on this interface. |
| 1.3.6.1.4.1.7244.2.30.1.11.1.5 | ColumnagentDhcp6ClientServerDUID | read-only | current | The DHCPv6 Unique Identifier of the DHCPv6 Server on this interface. |
| 1.3.6.1.4.1.7244.2.30.1.11.1.6 | ColumnagentDhcp6ClientT1Time | read-only | current | The T1 (in seconds) time as indicated by the DHCPv6 Server. T1 value indicates the time interval after which the address is requested for renewal. |
| 1.3.6.1.4.1.7244.2.30.1.11.1.7 | ColumnagentDhcp6ClientT2Time | read-only | current | The T2 (in seconds) time as indicated by the DHCPv6 Server. T2 value indicates the time interval after which the Client sends Rebind message to the Server inca… |
| 1.3.6.1.4.1.7244.2.30.1.11.1.8 | ColumnagentDhcp6ClientIAID | read-only | current | An identifier for an identity association chosen by this Client. |
| 1.3.6.1.4.1.7244.2.30.1.11.1.9 | ColumnagentDhcp6ClientPreferredLifeTime | read-only | current | The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server. |
| 1.3.6.1.4.1.7244.2.30.1.11.1.10 | ColumnagentDhcp6ClientValidLifeTime | read-only | current | The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server. |
| 1.3.6.1.4.1.7244.2.30.1.11.1.11 | ColumnagentDhcp6ClientRenewTime | read-only | current | The time (in seconds) remaining to send a DHCPv6 Renew request to DHCPv6 Server for the leased address. |
| 1.3.6.1.4.1.7244.2.30.1.11.1.12 | ColumnagentDhcp6ClientExpireTime | read-only | current | The time (in seconds) when the DHCPv6 leased address expires. |
| 1.3.6.1.4.1.7244.2.30.2 | NodeagentRouterRipngConfigGroup | |||
| 1.3.6.1.4.1.7244.2.30.2.1 | ScalaragentRouterRipngAdminState | read-write | current | Sets the administrative mode of RIPng in the router. |
| 1.3.6.1.4.1.7244.2.30.2.2 | ScalaragentRouterRipngSplitHorizonMode | read-write | current | Sets the RIPng split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple spl… |
| 1.3.6.1.4.1.7244.2.30.2.5 | ScalaragentRouterRipngDefaultMetric | read-write | current | Default metric of redistributed routes, when RIPng redistributes from other protocols. {0} indicates that the parameter is not configured, this value should no… |
| 1.3.6.1.4.1.7244.2.30.2.6 | ScalaragentRouterRipngDefaultMetricConfigured | read-write | current | Flag to determine whether RIPng default-metric is configured or not. Set to 'false' to unconfigure the default route metric. Set to 'true' is not allowed. |
| 1.3.6.1.4.1.7244.2.30.2.7 | ScalaragentRouterRipngDefaultInfoOriginate | read-write | current | Flag to determine, whether RIPng can advertise a default-route learned from another protocol. |
| 1.3.6.1.4.1.7244.2.30.2.8 | ScalaragentRouterRipngDistance | read-write | current | Configure the distance value for RIPng routes. |
| 1.3.6.1.4.1.7244.2.30.2.9 | TableagentRipngRouteRedistTable | not-accessible | current | This table contains the MIB objects required to configure route-redistribution for RIPng. Here, RIPng is the Destination protocol and the source protocols can … |
| 1.3.6.1.4.1.7244.2.30.2.9.1 | RowagentRipngRouteRedistEntry | not-accessible | current | |
| 1.3.6.1.4.1.7244.2.30.2.9.1.1 | ColumnagentRipngRouteRedistSource | read-only | current | Source route, from which RIPng can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry. |
| 1.3.6.1.4.1.7244.2.30.2.9.1.2 | ColumnagentRipngRouteRedistMode | read-write | current | User enabels/disables route-redistribution for a particular source protocol. |
| 1.3.6.1.4.1.7244.2.30.2.9.1.3 | ColumnagentRipngRouteRedistMetric | read-write | current | Metric used for redistributing a particular source protocol route into RIPng. {0} indicates that the parameter is not configured, this value should not be set.… |
| 1.3.6.1.4.1.7244.2.30.2.9.1.4 | ColumnagentRipngRouteRedistMetricConfigured | read-write | current | Flag to determine whether RIPng redistribute-metric is configured or not. Set to 'false' to unconfigure redistribute metric. Set to 'true' is not allowed. |
| 1.3.6.1.4.1.7244.2.30.2.10 | ScalaragentRouterRipngUpdateTime | read-write | current | Configure the Ripng update time. |
| 1.3.6.1.4.1.7244.2.30.2.11 | ScalaragentRouterRipngGarbageTime | read-write | current | Configure the Ripng garbage time. |
| 1.3.6.1.4.1.7244.2.30.2.12 | ScalaragentRouterRipngTimeoutTime | read-write | current | Configure the Ripng timeout time. |
| 1.3.6.1.4.1.7244.2.30.2.13 | TableagentRipngIfTable | not-accessible | current | The Ripng Interface Table describes the inter- faces from the viewpoint of Ripng. |
| 1.3.6.1.4.1.7244.2.30.2.13.1 | RowagentRipngIfEntry | not-accessible | current | The Ripng Interface Entry describes one inter- face from the viewpoint of Ripng. |
| 1.3.6.1.4.1.7244.2.30.2.13.1.1 | ColumnagentRipngIfIndex | read-only | current | The IfIndex associated with this instance. |
| 1.3.6.1.4.1.7244.2.30.2.13.1.2 | ColumnagentRipngIfAdminMode | read-write | current | Configures interface mode of Ripng. |
| 1.3.6.1.4.1.7244.2.30.2.13.1.3 | ColumnagentRipngIfPassiveMode | read-write | current | Flag to determine whether the interface is passive. A passive interface will not participate in the Ripng adjacency formation. |
| 1.3.6.1.4.1.7244.2.30.3 | NodeagentRouterOspfv3ConfigGroup | |||
| 1.3.6.1.4.1.7244.2.30.3.1 | ScalaragentOspfv3DefaultMetric | read-write | current | Default metric of redistributed routes, when OSPFv3 redistributes from other protocols. |
| 1.3.6.1.4.1.7244.2.30.3.2 | ScalaragentOspfv3DefaultMetricConfigured | read-write | current | Flag to determine whether OSPFv3 default-metric is configured or not. |
| 1.3.6.1.4.1.7244.2.30.3.3 | ScalaragentOspfv3DefaultInfoOriginate | read-write | current | Flag to determine, whether OSPFv3 can advertise a default-route learned from another protocol. |
| 1.3.6.1.4.1.7244.2.30.3.4 | ScalaragentOspfv3DefaultInfoOriginateAlways | read-write | current | When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding … |
| 1.3.6.1.4.1.7244.2.30.3.5 | ScalaragentOspfv3DefaultInfoOriginateMetric | read-write | current | Metric of the default route,which OSPF advertises when learned from other protocol. |
| 1.3.6.1.4.1.7244.2.30.3.6 | ScalaragentOspfv3DefaultInfoOriginateMetricConfigured | read-write | current | Flag to determine whether OSPF default-info originate metric is configured or not. |
| 1.3.6.1.4.1.7244.2.30.3.7 | ScalaragentOspfv3DefaultInfoOriginateMetricType | read-write | current | Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2). |
| 1.3.6.1.4.1.7244.2.30.3.8 | TableagentOspfv3RouteRedistTable | not-accessible | current | This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be… |
| 1.3.6.1.4.1.7244.2.30.3.8.1 | RowagentOspfv3RouteRedistEntry | not-accessible | current | |
| 1.3.6.1.4.1.7244.2.30.3.8.1.1 | ColumnagentOspfv3RouteRedistSource | read-only | current | Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry. |
| 1.3.6.1.4.1.7244.2.30.3.8.1.2 | ColumnagentOspfv3RouteRedistMode | read-write | current | User enabels/disables route-redistribution for a particular source protocol. |
| 1.3.6.1.4.1.7244.2.30.3.8.1.3 | ColumnagentOspfv3RouteRedistMetric | read-write | current | Metric used for redistributing a particular source protocol route into OSPF. |
| 1.3.6.1.4.1.7244.2.30.3.8.1.4 | ColumnagentOspfv3RouteRedistMetricConfigured | read-write | current | Flag to determine whether OSPF redistribute-metric is configured or not. |
| 1.3.6.1.4.1.7244.2.30.3.8.1.5 | ColumnagentOspfv3RouteRedistMetricType | read-write | current | Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2). |
| 1.3.6.1.4.1.7244.2.30.3.8.1.6 | ColumnagentOspfv3RouteRedistTag | read-write | current | It specifies the tag field in routes redistributed by OSPF. |
| 1.3.6.1.4.1.7244.2.30.3.9 | TableagentOspfv3IfTable | not-accessible | current | The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB. |
| 1.3.6.1.4.1.7244.2.30.3.9.1 | RowagentOspfv3IfEntry | not-accessible | current | The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB. |
| 1.3.6.1.4.1.7244.2.30.3.9.1.2 | ColumnagentOspfv3IfIpMtuIgnoreFlag | read-write | current | Configures the IP MTU Ignore Flag value for this OSPF interface. |
| 1.3.6.1.4.1.7244.2.30.3.9.1.3 | ColumnagentOspfv3IfPassiveMode | read-write | current | Flag to determine whether the interface is passive. A passive interface will not participate in the OSPF adjacency formation. |
| 1.3.6.1.4.1.7244.2.30.3.10 | TableagentOspfv3LsdbTable | not-accessible | current | The OSPF Process's Link State Database. |
| 1.3.6.1.4.1.7244.2.30.3.10.1 | RowagentOspfv3LsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.7244.2.30.3.10.1.1 | ColumnagentOspfv3LsdbAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.4.1.7244.2.30.3.10.1.2 | ColumnagentOspfv3LsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.7244.2.30.3.10.1.3 | ColumnagentOspfv3LsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.7244.2.30.3.10.1.4 | ColumnagentOspfv3LsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.7244.2.30.3.10.1.5 | ColumnagentOspfv3LsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.7244.2.30.3.10.1.6 | ColumnagentOspfv3LsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.7244.2.30.3.10.1.7 | ColumnagentOspfv3LsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.7244.2.30.3.10.1.8 | ColumnagentOspfv3LsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.7244.2.30.3.14 | ScalaragentOspfv3AutoCostRefBw | read-write | current | Auto cost refernece bandwidth of the router interafaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth i… |
| 1.3.6.1.4.1.7244.2.30.3.18 | TableagentOspfv3AsLsdbTable | not-accessible | current | The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is … |
| 1.3.6.1.4.1.7244.2.30.3.18.1 | RowagentOspfv3AsLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.7244.2.30.3.18.1.1 | ColumnagentOspfv3AsLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.7244.2.30.3.18.1.2 | ColumnagentOspfv3AsLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.7244.2.30.3.18.1.3 | ColumnagentOspfv3AsLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.7244.2.30.3.18.1.4 | ColumnagentOspfv3AsLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical … |
| 1.3.6.1.4.1.7244.2.30.3.18.1.5 | ColumnagentOspfv3AsLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.7244.2.30.3.18.1.6 | ColumnagentOspfv3AsLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.7244.2.30.3.18.1.7 | ColumnagentOspfv3AsLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.7244.2.30.3.19 | ScalaragentOspfv3DefaultPassiveMode | read-write | current | Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPFv3 adjacency formation. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AutoCostRefBw | Unsigned32 (1..4294967) | current | The value of reference bandwidth from which ospf calculates metric cost. |
| SpfTimerRange | Integer32 (0..65535) | current | The range of intervals on which Spf timers can be configured. |