SL-PM-MIB
33 objects
This PM module
Imported Objects
| IF-MIB | ifIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount PerfTotalCount |
| SL-MAIN-MIB | slMain |
| SL-XPDR-MIB | XpdrServiceType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE transmission |
| SNMPv2-TC | DateAndTime DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.3.25 | IdentityslPmMib | This PM module | ||
| 1.3.6.1.4.1.4515.1.3.25.1 | NodeslPmIntervals | |||
| 1.3.6.1.4.1.4515.1.3.25.1.1 | TableslPmIntervalTable | not-accessible | current | The PM Interval table. |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1 | RowslPmIntervalEntry | not-accessible | current | An entry in the PM Interval table. |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.1 | ColumnslPmType | not-accessible | current | The PM type |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.2 | ColumnslPmDirectionType | not-accessible | current | The PM direction near-end/far-end. |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.3 | ColumnslPmIntervalType | not-accessible | current | The type of the PM interval 15min/day |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.4 | ColumnslPmIntervalNumber | not-accessible | current | A number between 1 to 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently complet… |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.5 | ColumnslPmIntervalCVs | read-only | current | The counter associated with the number of Coding Violations encountered in a particular 15-minute interval in the past 24 hours. |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.6 | ColumnslPmIntervalESs | read-only | current | The counter associated with the number of Errored Seconds encountered in a particular 15-minute interval in the past 24 hours. |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.7 | ColumnslPmIntervalSESs | read-only | current | The counter associated with the number of Severely Errored Seconds encountered in a particular 15-minute interval in the past 24 hours. |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.8 | ColumnslPmIntervalSEFSs | read-only | current | The counter associated with the number of Severely Errored Framing Seconds encountered in a particular 15-minute interval in the past 24 hours. |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.9 | ColumnslPmIntervalUASs | read-only | current | The counter associated with the number of Unavailable Seconds encountered in a particular 15-minute interval in the past 24 hours. |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.10 | ColumnslPmIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.11 | ColumnslPmIntervalTcaFlag | read-only | current | TRUE if one of the counters crossed the threshold during the 15 minutes interval. |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.12 | ColumnslPmIntervalReset | read-write | current | Writing to this object reset the PM counters in this interval. |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.13 | ColumnslPmIntervalStartTime | read-only | current | This variable indicates the date and time at which this interval of measurements began on this interface. |
| 1.3.6.1.4.1.4515.1.3.25.1.1.1.14 | ColumnslPmServiceType | read-only | current | This variable indicates the XPDR service type of the port during the PM interval. |
| 1.3.6.1.4.1.4515.1.3.25.2 | NodeslPmL2Intervals | |||
| 1.3.6.1.4.1.4515.1.3.25.2.1 | TableslPmL2Table | not-accessible | current | The Layer 2 PM table. |
| 1.3.6.1.4.1.4515.1.3.25.2.1.1 | RowslPmL2Entry | not-accessible | current | An entry in the Layer 2 PM table. |
| 1.3.6.1.4.1.4515.1.3.25.2.1.1.1 | ColumnslPmL2CounterType | not-accessible | current | The PM Layer 2 counter type |
| 1.3.6.1.4.1.4515.1.3.25.2.1.1.2 | ColumnslPmL2IntervalType | not-accessible | current | The type of the PM interval 15min/day |
| 1.3.6.1.4.1.4515.1.3.25.2.1.1.3 | ColumnslPmL2IntervalNumber | not-accessible | current | A number between 1 to 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently complet… |
| 1.3.6.1.4.1.4515.1.3.25.2.1.1.4 | ColumnslPmL2Count | read-only | current | The counter associated with the number of Coding Violations encountered in a particular 15-minute interval in the past 24 hours. |
| 1.3.6.1.4.1.4515.1.3.25.2.1.1.5 | ColumnslPmL2ValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.4515.1.3.25.2.1.1.6 | ColumnslPmL2Reset | read-write | current | Writing to this object reset the PM counters in this interval. |
| 1.3.6.1.4.1.4515.1.3.25.2.1.1.7 | ColumnslPmL2StartTime | read-only | current | This variable indicates the date and time at which this interval of measurements began on this interface. |
| 1.3.6.1.4.1.4515.1.3.25.2.1.1.8 | ColumnslPmL2ServiceType | read-only | current | This variable indicates the XPDR service type of the port during the PM interval. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SlPmDirectionType | INTEGER { near(1), far(2) } | current | The PM direction type. This relevant only to OTU or ODU types |
| SlPmIntervalType | INTEGER { fifteen(1), day(2) } | current | The PM interval types. |
| SlPmL2Type | INTEGER { rxPackets(1), txPackets(2), rxBytes(3), txBytes(4), rxCrc(5), txCrc(6), rxMaxBitRate(7), txMaxBitRate(8) } | current | The PM types |
| SlPmType | INTEGER { native(1) } | current | The PM types: Native types: GBE - ifType=117, Path=0 FC - ifType=56, Path=0 SONET - ifType=39, Path=0 OTU - ifType=195, Path=0 ODU - ifType=195, Path=1..4 FEC - ifType=195, Path=5..6 OPT - ifType=196, Path=0 |