SUPERMICRO-OSPFV3-MIB
115 objects
Changed the Enterprises MIB from SNMPv1 syntax MIB to SNMPv2 syntax MIB
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10876.101.1.90 | Identityfutospfv3 | Changed the Enterprises MIB from SNMPv1 syntax MIB to SNMPv2 syntax MIB | ||
| 1.3.6.1.4.1.10876.101.1.90.1 | Nodefutospfv3GeneralGroup | |||
| 1.3.6.1.4.1.10876.101.1.90.1.1 | ScalarfutOspfv3OverFlowState | read-only | current | Indicates whether router is in overflow state or not. |
| 1.3.6.1.4.1.10876.101.1.90.1.2 | ScalarfutOspfv3TraceLevel | read-write | current | |
| 1.3.6.1.4.1.10876.101.1.90.1.3 | ScalarfutOspfv3ABRType | read-write | current | Different Types of ABRs supported |
| 1.3.6.1.4.1.10876.101.1.90.1.4 | ScalarfutOspfv3NssaAsbrDefRtTrans | read-write | current | Specifies the P-Bit setting for the default Type-7 LSA generated by ASBR(which is not ABR).When set disabled, P-Bit is clear in the generated default Lsa. When… |
| 1.3.6.1.4.1.10876.101.1.90.1.5 | ScalarfutOspfv3DefaultPassiveInterface | read-write | current | When set to true all OSPF interfaces created after this setting will be passive interfaces. If set to false OSPF interfaces created after this setting will not… |
| 1.3.6.1.4.1.10876.101.1.90.1.6 | ScalarfutOspfv3SpfDelay | read-write | current | The Delay at which routing calculation is carried after a topology change. |
| 1.3.6.1.4.1.10876.101.1.90.1.7 | ScalarfutOspfv3SpfHoldTime | read-write | current | The minimum time between two consecutive SPF calculations. |
| 1.3.6.1.4.1.10876.101.1.90.1.8 | ScalarfutOspfv3RTStaggeringInterval | read-write | current | This object denotes the time interval in milliseconds after which the route calculation is suspended for doing all other OSPFv3 operations. Refault value of th… |
| 1.3.6.1.4.1.10876.101.1.90.1.9 | ScalarfutOspfv3RTStaggeringStatus | read-write | current | This object indicates the status of route table calculation staggering option |
| 1.3.6.1.4.1.10876.101.1.90.1.10 | ScalarfutOspfv3RestartStrictLsaChecking | read-write | current | Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile … |
| 1.3.6.1.4.1.10876.101.1.90.1.11 | ScalarfutOspfv3HelperSupport | read-write | current | The router's helper support for OSPFv3 graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. futOspfv3HelperSupport is… |
| 1.3.6.1.4.1.10876.101.1.90.1.12 | ScalarfutOspfv3HelperGraceTimeLimit | read-write | current | Configured OSPFv3 graceful restart interval limit in helper side. Time is configured in seconds. If this object is set to 0, then the helper accepts the restar… |
| 1.3.6.1.4.1.10876.101.1.90.1.13 | ScalarfutOspfv3RestartAckState | read-write | current | Indicates Reception required / not-required . whether GraceLSAs sent by this router are expected to be acknowledged by peers. This object is persistent and whe… |
| 1.3.6.1.4.1.10876.101.1.90.1.14 | ScalarfutOspfv3GraceLsaRetransmitCount | read-write | current | Number of retransmissions for unacknowledged GraceLSAs |
| 1.3.6.1.4.1.10876.101.1.90.1.15 | ScalarfutOspfv3RestartReason | read-write | current | The router's restarter reason code of OSPFv3 graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. This object is pers… |
| 1.3.6.1.4.1.10876.101.1.90.1.16 | ScalarfutOspfv3ExtTraceLevel | read-write | current | |
| 1.3.6.1.4.1.10876.101.1.90.1.17 | ScalarfutOspfv3SetTraps | read-write | current | This object is used to enable and disable specific OSPFv3 traps. Currently the following are defined 0x00000000 - Traps are not enabled. 0x00000001 - Restartin… |
| 1.3.6.1.4.1.10876.101.1.90.1.18 | ScalarfutOspfv3HotStandbyAdminStatus | read-only | current | High Availabilty feature enabled or disabled in OSPFv3 |
| 1.3.6.1.4.1.10876.101.1.90.1.19 | ScalarfutOspfv3HotStandbyState | read-only | current | Internal State of the OSPFv3 instance. init(1) - OSPFv3 instance is up and RM State is undetermined. activeStandbyUp(2) - The RM state is active & standby is u… |
| 1.3.6.1.4.1.10876.101.1.90.1.20 | ScalarfutOspfv3DynamicBulkUpdStatus | read-only | current | Status of dynamic bulk update between active and dynamic OSPFv3 instance. notStarted(1): Dynamic Bulk Update has not yet been started. inProgress(2): Dynamic B… |
| 1.3.6.1.4.1.10876.101.1.90.1.21 | ScalarfutOspfv3StandbyHelloSyncCount | read-only | current | Total number of hello packets synced to standby node. |
| 1.3.6.1.4.1.10876.101.1.90.1.22 | ScalarfutOspfv3StandbyLsaSyncCount | read-only | current | Total number of LSAs synced to standby node. |
| 1.3.6.1.4.1.10876.101.1.90.2 | TablefutOspfv3IfTable | not-accessible | current | The OSPFv3 Interface Table describes the inter- faces from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.10876.101.1.90.2.1 | RowfutOspfv3IfEntry | not-accessible | current | The OSPFv3 Interface Entry describes one inter- face from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.1 | ColumnfutOspfv3IfIndex | not-accessible | current | The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.2 | ColumnfutOspfv3IfOperState | read-only | current | This gives the Operational Status of the Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.3 | ColumnfutOspfv3IfPassive | read-write | current | This object is used to make the inteface as passive. If set to TRUE, then interface will be passive If set to FALSE then interface will be normal |
| 1.3.6.1.4.1.10876.101.1.90.2.1.4 | ColumnfutOspfv3IfNbrCount | read-only | current | This gives the Total number of Neighbour's through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.5 | ColumnfutOspfv3IfAdjCount | read-only | current | This gives the Total number of Adjacencies through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.6 | ColumnfutOspfv3IfHelloRcvd | read-only | current | This gives the Total number of Hello packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.7 | ColumnfutOspfv3IfHelloTxed | read-only | current | This gives the Total number of Hello packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.8 | ColumnfutOspfv3IfHelloDisd | read-only | current | This gives the Total number of Hello packets discarded through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.9 | ColumnfutOspfv3IfDdpRcvd | read-only | current | This gives the Total number of Ddp packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.10 | ColumnfutOspfv3IfDdpTxed | read-only | current | This gives the Total number of Ddp packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.11 | ColumnfutOspfv3IfDdpDisd | read-only | current | This gives the Total number of Ddp packets discarded through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.12 | ColumnfutOspfv3IfLrqRcvd | read-only | current | This gives the Total number of Lrq packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.13 | ColumnfutOspfv3IfLrqTxed | read-only | current | This gives the Total number of Lrq packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.14 | ColumnfutOspfv3IfLrqDisd | read-only | current | This gives the Total number of Lrq packets discarded through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.15 | ColumnfutOspfv3IfLsuRcvd | read-only | current | This gives the Total number of Lsu packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.16 | ColumnfutOspfv3IfLsuTxed | read-only | current | This gives the Total number of Lsu packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.17 | ColumnfutOspfv3IfLsuDisd | read-only | current | This gives the Total number of Lsu packets discarded through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.18 | ColumnfutOspfv3IfLakRcvd | read-only | current | This gives the Total number of Lak packets received through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.19 | ColumnfutOspfv3IfLakTxed | read-only | current | This gives the Total number of Lak packets transmitted through that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.20 | ColumnfutOspfv3IfLakDisd | read-only | current | This gives the Total number of Lak packets discarded on that Interface. |
| 1.3.6.1.4.1.10876.101.1.90.2.1.21 | ColumnfutOspfv3IfLinkLSASuppression | read-write | current | Specifies whether or not link LSA origination is suppressed for networks other than broadcast or NBMA. The object is set to value true (1) to suppress the orig… |
| 1.3.6.1.4.1.10876.101.1.90.3 | TablefutOspfv3RoutingTable | not-accessible | current | A table of routing information. |
| 1.3.6.1.4.1.10876.101.1.90.3.1 | RowfutOspfv3RoutingEntry | not-accessible | current | The information regarding a single route. |
| 1.3.6.1.4.1.10876.101.1.90.3.1.1 | ColumnfutOspfv3RouteDestType | not-accessible | current | The prefix type of futOspfv3RouteDestType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.10876.101.1.90.3.1.2 | ColumnfutOspfv3RouteDest | not-accessible | current | The Desitnation IPv6 Address of this route. |
| 1.3.6.1.4.1.10876.101.1.90.3.1.3 | ColumnfutOspfv3RoutePfxLength | not-accessible | current | Indicates the prefix length of the destination Address. |
| 1.3.6.1.4.1.10876.101.1.90.3.1.4 | ColumnfutOspfv3RouteNextHopType | not-accessible | current | The prefix type offutOspfv3RouteNextHopType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.10876.101.1.90.3.1.5 | ColumnfutOspfv3RouteNextHop | not-accessible | current | Next Hop IPv6 Address for this route. For direct routes it has the value ::0. |
| 1.3.6.1.4.1.10876.101.1.90.3.1.6 | ColumnfutOspfv3RouteType | read-only | current | Type of the route |
| 1.3.6.1.4.1.10876.101.1.90.3.1.7 | ColumnfutOspfv3RouteAreaId | read-only | current | Area ID associated with the route |
| 1.3.6.1.4.1.10876.101.1.90.3.1.8 | ColumnfutOspfv3RouteCost | read-only | current | It is a Type 1 external metrics which is expressed in the same units as OSPF interface cost ie. in terms of the OSPF link state metric. If Type1 and Type2 cost… |
| 1.3.6.1.4.1.10876.101.1.90.3.1.9 | ColumnfutOspfv3RouteType2Cost | read-only | current | Type 2 external metrics are configured with the cost greater than any path internal to the AS. Use of Type 2 external metrics assumes that routing between AS i… |
| 1.3.6.1.4.1.10876.101.1.90.3.1.10 | ColumnfutOspfv3RouteInterfaceIndex | read-only | current | Interface Index associated with the route |
| 1.3.6.1.4.1.10876.101.1.90.4 | TablefutOspfv3AsExternalAggregationTable | not-accessible | current | Indicates whether for the specified address range Type-7/Type-5 LSA will be aggregated or not generated. |
| 1.3.6.1.4.1.10876.101.1.90.4.1 | RowfutOspfv3AsExternalAggregationEntry | not-accessible | current | Supports configuration of Type-5,Type-7 Address Range specifying whether for the configured range, Type-5,Type-7 LSA will be generated or not, and if generated… |
| 1.3.6.1.4.1.10876.101.1.90.4.1.1 | ColumnfutOspfv3AsExternalAggregationNetType | not-accessible | current | The prefix type of futOspfv3AsExternalAggregationNetType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.10876.101.1.90.4.1.2 | ColumnfutOspfv3AsExternalAggregationNet | not-accessible | current | The IPv6 address of the Net indicated by the range. |
| 1.3.6.1.4.1.10876.101.1.90.4.1.3 | ColumnfutOspfv3AsExternalAggregationPfxLength | not-accessible | current | The prefix length that pertains to the range. |
| 1.3.6.1.4.1.10876.101.1.90.4.1.4 | ColumnfutOspfv3AsExternalAggregationAreaId | not-accessible | current | Refer to description in futOspfv3AsExternalAggregationEffect. |
| 1.3.6.1.4.1.10876.101.1.90.4.1.5 | ColumnfutOspfv3AsExternalAggregationEffect | read-create | current | Indicates whether Type-5/Type-7 will be aggregated or not generated for the specified range. When set to 'allowAll' (3) and associated areaId is 0.0.0.0 aggreg… |
| 1.3.6.1.4.1.10876.101.1.90.4.1.6 | ColumnfutOspfv3AsExternalAggregationTranslation | read-create | current | This when set to enabled, P Bit is set in the generated Type-7 LSA. When set disabled P Bit is clear in the generated Type-7 LSA for the range. |
| 1.3.6.1.4.1.10876.101.1.90.4.1.7 | ColumnfutOspfv3AsExternalAggregationStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. |
| 1.3.6.1.4.1.10876.101.1.90.5 | TablefutOspfv3BRRouteTable | not-accessible | current | A table of routing information. |
| 1.3.6.1.4.1.10876.101.1.90.5.1 | RowfutOspfv3BRRouteEntry | not-accessible | current | The information regarding a single route. |
| 1.3.6.1.4.1.10876.101.1.90.5.1.1 | ColumnfutOspfv3BRRouteDest | not-accessible | current | Router Id of the destination router. ABR/ASBR entries will have Router Id as the destination network Id |
| 1.3.6.1.4.1.10876.101.1.90.5.1.2 | ColumnfutOspfv3BRRouteNextHopType | not-accessible | current | The prefix type of futOspfv3BRRouteNextHopType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.10876.101.1.90.5.1.3 | ColumnfutOspfv3BRRouteNextHop | not-accessible | current | Next Hop IPv6 Address for this route. For direct routes it has the value ::0. |
| 1.3.6.1.4.1.10876.101.1.90.5.1.4 | ColumnfutOspfv3BRRouteDestType | not-accessible | current | Type of the route. The route can be ABR route entry or ASBR route entry |
| 1.3.6.1.4.1.10876.101.1.90.5.1.5 | ColumnfutOspfv3BRRouteType | read-only | current | Type of the route |
| 1.3.6.1.4.1.10876.101.1.90.5.1.6 | ColumnfutOspfv3BRRouteAreaId | read-only | current | Area ID associated with the route |
| 1.3.6.1.4.1.10876.101.1.90.5.1.7 | ColumnfutOspfv3BRRouteCost | read-only | current | The cost associated with the route |
| 1.3.6.1.4.1.10876.101.1.90.5.1.8 | ColumnfutOspfv3BRRouteInterfaceIndex | read-only | current | Interface Index associated with the route |
| 1.3.6.1.4.1.10876.101.1.90.6 | TablefutOspfv3RedistRouteCfgTable | not-accessible | current | A table describing the configuration of Metric Cost and Route Type information to be applied to the routes learnt from the RTM. |
| 1.3.6.1.4.1.10876.101.1.90.6.1 | RowfutOspfv3RedistRouteCfgEntry | not-accessible | current | Information describing the configuration of single route entry. |
| 1.3.6.1.4.1.10876.101.1.90.6.1.1 | ColumnfutOspfv3RedistRouteDestType | not-accessible | current | The prefix type of futOspfv3RedistRouteDestType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.10876.101.1.90.6.1.2 | ColumnfutOspfv3RedistRouteDest | not-accessible | current | IPv6 Address of the Destination route. |
| 1.3.6.1.4.1.10876.101.1.90.6.1.3 | ColumnfutOspfv3RedistRoutePfxLength | not-accessible | current | Prefix Length of the Destination route. |
| 1.3.6.1.4.1.10876.101.1.90.6.1.4 | ColumnfutOspfv3RedistRouteMetric | read-write | current | The Metric value applied to the route before it is adv. into the OSPFv3 Domain. |
| 1.3.6.1.4.1.10876.101.1.90.6.1.5 | ColumnfutOspfv3RedistRouteMetricType | read-write | current | The Metric Type applied to the route before it is adv. into the OSPFv3 Domain |
| 1.3.6.1.4.1.10876.101.1.90.6.1.6 | ColumnfutOspfv3RedistRouteTagType | read-write | current | The Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the futOspfv3R… |
| 1.3.6.1.4.1.10876.101.1.90.6.1.7 | ColumnfutOspfv3RedistRouteTag | read-write | current | The Route Tag in case the user configures a Manual option for the tags. |
| 1.3.6.1.4.1.10876.101.1.90.6.1.8 | ColumnfutOspfv3RedistRouteStatus | read-create | current | The variable dispalys the status of the entry.Setting it to 'invalid' has the effect of rendering it inoperative. |
| 1.3.6.1.4.1.10876.101.1.90.7 | Nodefutospfv3RRDGroup | |||
| 1.3.6.1.4.1.10876.101.1.90.7.1 | NodefutOspfv3RRDGeneralGroup | |||
| 1.3.6.1.4.1.10876.101.1.90.7.1.1 | ScalarfutOspfv3RRDStatus | read-write | current | This MIB object enables/disables OSPFv3 to participate in Route Redistribution. If set to enabled, OSPFv3 will start advertising the routes learned by other pr… |
| 1.3.6.1.4.1.10876.101.1.90.7.1.2 | ScalarfutOspfv3RRDSrcProtoMask | read-write | current | The bit mask of source protocols from which routes are imported to OSPFv3. Bit 1, if set, indicates that local routes are redistributed into OSPFv3. (value = 2… |
| 1.3.6.1.4.1.10876.101.1.90.7.1.3 | ScalarfutOspfv3RRDRouteMapName | read-write | current | Name Identifies the specified route-map in the list of route-maps. |
| 1.3.6.1.4.1.10876.101.1.90.8 | Nodefutospfv3DistInOutRouteMap | |||
| 1.3.6.1.4.1.10876.101.1.90.8.1 | TablefutOspfv3DistInOutRouteMapTable | not-accessible | current | A table describing the configuration of filtering for route map. |
| 1.3.6.1.4.1.10876.101.1.90.8.1.1 | RowfutOspfv3DistInOutRouteMapEntry | not-accessible | current | Information describing the filtering configuration of single entry. |
| 1.3.6.1.4.1.10876.101.1.90.8.1.1.1 | ColumnfutOspfv3DistInOutRouteMapName | not-accessible | current | Route map name. |
| 1.3.6.1.4.1.10876.101.1.90.8.1.1.2 | ColumnfutOspfv3DistInOutRouteMapType | not-accessible | current | Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out |
| 1.3.6.1.4.1.10876.101.1.90.8.1.1.3 | ColumnfutOspfv3DistInOutRouteMapValue | read-write | current | Distance value ( this will be unused for distribute list ) |
| 1.3.6.1.4.1.10876.101.1.90.8.1.1.4 | ColumnfutOspfv3DistInOutRouteMapRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.10876.101.1.90.9 | Nodefutospf3PreferenceGroup | |||
| 1.3.6.1.4.1.10876.101.1.90.9.1 | ScalarfutOspf3PreferenceValue | read-write | current | Preference value for OSPFv3 routes. Use '0' to set default value |
| 1.3.6.1.4.1.10876.101.1.90.101 | NodefutOspfv3Notification | |||
| 1.3.6.1.4.1.10876.101.1.90.101.0 | NodefutOspfv3Traps | |||
| 1.3.6.1.4.1.10876.101.1.90.101.0.1 | NotificationfutOspfv3RestartStatusChange | current | An ospfv3RestartStatusChange trap signifies that there has been a change in the graceful restart state for the router. This trap should be generated when the r… | |
| 1.3.6.1.4.1.10876.101.1.90.101.0.2 | NotificationfutOspfv3NbrRestartHelperStatusChange | current | An futOspfv3NbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the neighbor. This trap should be… | |
| 1.3.6.1.4.1.10876.101.1.90.101.0.3 | NotificationfutOspfv3VirtNbrRestartHelperStatusChange | current | An futOspfv3VirtNbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the virtual neighbor. This tr… | |
| 1.3.6.1.4.1.10876.101.1.90.101.0.4 | NotificationfutOspfv3HotStandbyStateChgTrap | current | A notification is sent to the management entity whenever there is a state change in the OSPFv3 hotstandby Module. | |
| 1.3.6.1.4.1.10876.101.1.90.101.0.5 | NotificationfutOspfv3HotStandbyBulkUpdAbortTrap | current | A notification is sent to the management entity whenever the bulk update is aborted | |
| 1.3.6.1.4.1.10876.101.1.90.101.1 | NodefutOspfv3TrapObject | |||
| 1.3.6.1.4.1.10876.101.1.90.101.1.1 | ScalarfutOspfv3TrapNbrIfIndex | accessible-for-notify | current | The local link ID of the link over which the neighbor can be reached. This is used for Trap |
| 1.3.6.1.4.1.10876.101.1.90.101.1.2 | ScalarfutOspfv3TrapVirtNbrRtrId | accessible-for-notify | current | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. This is used for Trap |
| 1.3.6.1.4.1.10876.101.1.90.101.1.3 | ScalarfutOspfv3TrapNbrRtrId | accessible-for-notify | current | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. This is used for Trap |
| 1.3.6.1.4.1.10876.101.1.90.101.1.4 | ScalarfutOspfv3TrapVirtNbrArea | accessible-for-notify | current | The Transit Area Identifier. This is used for Trap |
| 1.3.6.1.4.1.10876.101.1.90.101.1.5 | ScalarfutOspfv3TrapBulkUpdAbortReason | accessible-for-notify | current | The reason for the failure of particular Bulk Update Abort. |