TN-ETHSOAM-PM-MIB
98 objects
This MIB module contains the Performance Monitoring objects for the management of Ethernet Services Operations, Administration and Maintenance in TN platform products.
Imported Objects
| IF-MIB | ifIndex |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus TimeInterval |
| TN-ETHSOAM-MIB | tnEthSoaminstance |
| TN-EVC-MIB | tnEvcEceId tnEvcIndex |
| TRANSITION-SMI | tnProducts |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.868.2.5.143 | IdentitytnEthSoamPmMIB | This MIB module contains the Performance Monitoring objects for the management of Ethernet Services Operations, Administration and Maintenance in TN platform p… | ||
| 1.3.6.1.4.1.868.2.5.143.0 | NodetnEthSoamPmNotifications | |||
| 1.3.6.1.4.1.868.2.5.143.1 | NodetnEthSoamPmCfgMIBObjects | |||
| 1.3.6.1.4.1.868.2.5.143.1.1 | NodetnEthSoamPmSessionCfgObjects | |||
| 1.3.6.1.4.1.868.2.5.143.1.1.1 | TabletnEthSoamPmSessionCfgTable | not-accessible | current | This table configure the Performance monitor session and storage settings. |
| 1.3.6.1.4.1.868.2.5.143.1.1.1.1 | RowtnEthSoamPmSessionCfgEntry | not-accessible | current | Entries in this table configure the Performance monitor session and storage settings. |
| 1.3.6.1.4.1.868.2.5.143.1.1.1.1.1 | ColumntnEthSoamPmSessionCfgId | not-accessible | current | An index to the Performce Monitor Configuration table which indicates the specific session to be configured. |
| 1.3.6.1.4.1.868.2.5.143.1.1.1.1.2 | ColumntnEthSoamPmSessionCfgType | read-only | current | The Perfmonce Monitor session type: - lossMeasurement SOAM PM loss measurement collect and storage. - delayMeasurement SOAM PM delay measurement collect and st… |
| 1.3.6.1.4.1.868.2.5.143.1.1.1.1.3 | ColumntnEthSoamPmSessionCfgSessionMode | read-write | current | Enable or disable this performance monitor session. |
| 1.3.6.1.4.1.868.2.5.143.1.1.1.1.4 | ColumntnEthSoamPmSessionCfgStorageMode | read-write | current | Enable or disable the performance monitor local storage. |
| 1.3.6.1.4.1.868.2.5.143.1.1.1.1.5 | ColumntnEthSoamPmSessionCfgInterval | read-write | current | The measurement interval for the performance monitor. The interval unit is minute, the valid range is system defined. A typical range would be 1 - 60(mins) |
| 1.3.6.1.4.1.868.2.5.143.1.2 | NodetnEthSoamPmTransferCfgObjects | |||
| 1.3.6.1.4.1.868.2.5.143.1.2.1 | TabletnEthSoamPmTransferCfgTable | not-accessible | current | This table configure the Performance Monitor data transfer related settings. |
| 1.3.6.1.4.1.868.2.5.143.1.2.1.1 | RowtnEthSoamPmTransferCfgEntry | not-accessible | current | Entry in this table configure the Performance Monitor data transfer related settings. |
| 1.3.6.1.4.1.868.2.5.143.1.2.1.1.1 | ColumntnEthSoamPmTransferCfgId | not-accessible | current | Indicate the performance monitor data transfer table index. |
| 1.3.6.1.4.1.868.2.5.143.1.2.1.1.2 | ColumntnEthSoamPmTransferCfgMode | read-write | current | Configure the performance monitor transfer mode per system. Possible modes are: - Enabled: Transfer data is enabled. - Disabled: Transfer data is disabled. |
| 1.3.6.1.4.1.868.2.5.143.1.2.1.1.3 | ColumntnEthSoamPmTransferCfgSchedHrs | read-write | current | It must be possible to select one or more of the 24 hours in a day, when PM data transfer will happen. 00:00 01:00 02:00 03:00 04:00 05:00 06:00 07:00 08:00 09… |
| 1.3.6.1.4.1.868.2.5.143.1.2.1.1.4 | ColumntnEthSoamPmTransferCfgSchedMins | read-write | current | It must be possible to select one or more of the four 15 min. in an hour, when PM data transfer will happen. 00:00 00:15 00:30 00:45 Default is none selected. |
| 1.3.6.1.4.1.868.2.5.143.1.2.1.1.5 | ColumntnEthSoamPmTransferCfgSchedOffset | read-write | current | It must be possible to configure a fixed offset that is added to the scheduled transfer time. The rage is 0-15 minutes. Default is 0 min. The sum of Scheduled … |
| 1.3.6.1.4.1.868.2.5.143.1.2.1.1.6 | ColumntnEthSoamPmTransferCfgRandomOffset | read-write | current | It must be possible to configure a random offset that is added to the scheduled transfer time. The offset added to the scheduled transfer time must be a random… |
| 1.3.6.1.4.1.868.2.5.143.1.2.1.1.7 | ColumntnEthSoamPmTransferCfgServerAddr | read-write | current | It must be possible to configure the full URL of the server and the corresponding directory (if any) for uploading. The supported protocols are HTTP and TFTP. … |
| 1.3.6.1.4.1.868.2.5.143.1.2.1.1.8 | ColumntnEthSoamPmTransferCfgIntervalMode | read-write | current | There are three supported interval modes. All available intervals: To enable transfer of all completed Measurement Intervals. New intervals since last transfer… |
| 1.3.6.1.4.1.868.2.5.143.1.2.1.1.9 | ColumntnEthSoamPmTransferCfgIntervalNum | read-write | current | When Fixed number of interval selected, this value is used to determine the number of intervals to send. The range is 1 to 96 Intervals. |
| 1.3.6.1.4.1.868.2.5.143.1.2.1.1.10 | ColumntnEthSoamPmTransferCfgIncludeIncomplete | read-write | current | When this option is checked, PM data transfer will include the suspended (incomplete) transmission. - Enabled: PM data transfer will include the suspended (inc… |
| 1.3.6.1.4.1.868.2.5.143.2 | NodetnEthSoamPmStatsMIBObjects | |||
| 1.3.6.1.4.1.868.2.5.143.2.1 | NodetnEthSoamPmLmStatsObjects | |||
| 1.3.6.1.4.1.868.2.5.143.2.1.1 | TabletnEthSoamPmLmHistoryStatsTable | not-accessible | current | This table contains the results for availability history Measurement Intervals in a SOAM Loss Measurement session. Rows of this table object are created automa… |
| 1.3.6.1.4.1.868.2.5.143.2.1.1.1 | RowtnEthSoamPmLmHistoryStatsEntry | not-accessible | current | The conceptual row of tnEthSoamPmLmHistoryStatsTable |
| 1.3.6.1.4.1.868.2.5.143.2.1.1.1.1 | ColumntnEthSoamPmLmHistoryStatsIndex | not-accessible | current | The index for the Measurement Interval within this PM session. Measurement Interval indexes are assigned sequentially by the device. The first Measurement Inte… |
| 1.3.6.1.4.1.868.2.5.143.2.1.1.1.2 | ColumntnEthSoamPmLmHistoryStatsEndTime | read-only | current | The time that this Measurement Interval ended. |
| 1.3.6.1.4.1.868.2.5.143.2.1.1.1.3 | ColumntnEthSoamPmLmHistoryStatsElapsedTime | read-only | current | The time that this Measurement Interval has been running, in 0.01 seconds. |
| 1.3.6.1.4.1.868.2.5.143.2.1.1.1.4 | ColumntnEthSoamPmLmHistoryStatsTxCount | read-only | current | This object contains the number of outbound frames in this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.1.1.1.5 | ColumntnEthSoamPmLmHistoryStatsRxCount | read-only | current | This object contains the number of inbound frames in this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.1.1.1.6 | ColumntnEthSoamPmLmHistoryStatsNELossCount | read-only | current | This object contains the number of frames lossed in the near end of this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.1.1.1.7 | ColumntnEthSoamPmLmHistoryStatsFELossCount | read-only | current | This object contains the number of frames lossed in the far end of this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.1.1.1.8 | ColumntnEthSoamPmLmHistoryStatsNEAvgFlr | read-only | current | This object contains the average frame loss ratio in the near end of this MEP calculated for this Measurement Interval. The value is a ratio that is expressed … |
| 1.3.6.1.4.1.868.2.5.143.2.1.1.1.9 | ColumntnEthSoamPmLmHistoryStatsFEAvgFlr | read-only | current | This object contains the average frame loss ratio in the far end of this MEP calculated for this Measurement Interval. The value is a ratio that is expressed a… |
| 1.3.6.1.4.1.868.2.5.143.2.2 | NodetnEthSoamPmDmStatsObjects | |||
| 1.3.6.1.4.1.868.2.5.143.2.2.1 | TabletnEthSoamPmDmHistoryStatsTable | not-accessible | current | This table contains the results for history Measurement Intervals in a SOAM Delay Measurement session. Rows of this table are created automatically by the SNMP… |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1 | RowtnEthSoamPmDmHistoryStatsEntry | not-accessible | current | The conceptual row of tnEthSoamPmDmHistoryStatsTable |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.1 | ColumntnEthSoamPmDmHistoryStatsIndex | not-accessible | current | The index for the Measurement Interval within this PM session. Measurement Interval indexes are assigned sequentially by the device. The first Measurement Inte… |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.2 | ColumntnEthSoamPmDmHistoryStatsEndTime | read-only | current | The time that this Measurement Interval ended. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.3 | ColumntnEthSoamPmDmHistoryStatsElapsedTime | read-only | current | The time that this Measurement Interval has been running, in 0.01 seconds. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.4 | ColumntnEthSoamPmDmHistoryStatsTxCount | read-only | current | This object contains the number of frames transmitted in this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.5 | ColumntnEthSoamPmDmHistoryStatsRxCount | read-only | current | This object contains the number of frames received in this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.6 | ColumntnEthSoamPmDmHistoryStatsFNAvgFrameDelay | read-only | current | This object contains the average one-way frame delay in the far end to near end direction calculated by this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.7 | ColumntnEthSoamPmDmHistoryStatsFNAvgFrameDV | read-only | current | This object contains the average one-way inter-frame delay interval in the far end to near end direction calculated by this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.8 | ColumntnEthSoamPmDmHistoryStatsFNMinFrameDelay | read-only | current | This object contains the minimum one-way inter-frame delay interval in the far end to near end direction calculated by this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.9 | ColumntnEthSoamPmDmHistoryStatsFNMaxFrameDelay | read-only | current | This object contains the maximum one-way inter-frame delay interval in the far end to near end direction calculated by this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.10 | ColumntnEthSoamPmDmHistoryStatsNFAvgFrameDelay | read-only | current | This object contains the average one-way frame delay in the near end to far end direction calculated by this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.11 | ColumntnEthSoamPmDmHistoryStatsNFAvgFrameDV | read-only | current | This object contains the average one-way inter-frame delay interval in the near end to far end direction calculated by this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.12 | ColumntnEthSoamPmDmHistoryStatsNFMinFrameDelay | read-only | current | This object contains the minimum one-way inter-frame delay interval in the near end to far end direction calculated by this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.13 | ColumntnEthSoamPmDmHistoryStatsNFMaxFrameDelay | read-only | current | This object contains the maximum one-way inter-frame delay interval in the near end to far end direction calculated by this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.14 | ColumntnEthSoamPmDmHistoryStatsTwoWayAvgFrameDelay | read-only | current | This object contains the average two-way inter-frame delay interval direction calculated by this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.15 | ColumntnEthSoamPmDmHistoryStatsTwoWayAvgFrameDV | read-only | current | This object contains the average two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.16 | ColumntnEthSoamPmDmHistoryStatsTwoWayMinFrameDelay | read-only | current | This object contains the minimum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.2.1.1.17 | ColumntnEthSoamPmDmHistoryStatsTwoWayMaxFrameDelay | read-only | current | This object contains the maximum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3 | NodetnEthSoamPmEvcStatsObjects | |||
| 1.3.6.1.4.1.868.2.5.143.2.3.1 | TabletnEthSoamPmEvcHistoryStatsTable | not-accessible | current | This table contains the results for history Measurement Intervals in a SOAM EVC Measurement session. Rows of this table object are created automatically by the… |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1 | RowtnEthSoamPmEvcHistoryStatsEntry | not-accessible | current | The conceptual row of tnEthSoamPmEvcHistoryStatsTable |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.1 | ColumntnEthSoamPmEvcHistoryStatsIndex | not-accessible | current | The index for the Measurement Interval within this PM session. Measurement Interval indexes are assigned sequentially by the device. The first Measurement Inte… |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.2 | ColumntnEthSoamPmEvcHistoryStatsEndTime | read-only | current | The time that this Measurement Interval ended. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.3 | ColumntnEthSoamPmEvcHistoryStatsElapsedTime | read-only | current | The time that this Measurement Interval has been running, in 0.01 seconds. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.4 | ColumntnEthSoamPmEvcHistoryStatsGreenFramesTx | read-only | current | This object contains the number of outbound frames within the CIR / CBS compliance level in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.5 | ColumntnEthSoamPmEvcHistoryStatsGreenFramesRx | read-only | current | This object contains the number of inbound frames within the CIR / CBS compliance level in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.6 | ColumntnEthSoamPmEvcHistoryStatsGreenBytesTx | read-only | current | This object contains the number of outbound bytes, where frames are within the CIR / CBS compliance level in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.7 | ColumntnEthSoamPmEvcHistoryStatsGreenBytesRx | read-only | current | This object contains the number of inbound bytes, where frames are within the CIR / CBS compliance level in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.8 | ColumntnEthSoamPmEvcHistoryStatsYellowFramesTx | read-only | current | This object contains the number of outbound frames exceeding the CIR/CBS but within the EIR/EBS in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.9 | ColumntnEthSoamPmEvcHistoryStatsYellowFramesRx | read-only | current | This object contains the number of inbound frames exceeding the CIR/CBS but within the EIR/EBS in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.10 | ColumntnEthSoamPmEvcHistoryStatsYellowBytesTx | read-only | current | This object contains the number of outbound bytes, where frames exceed the CIR/CBS but are within the EIR/EBS in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.11 | ColumntnEthSoamPmEvcHistoryStatsYellowBytesRx | read-only | current | This object contains the number of inbound bytes, where frames exceed the CIR/CBS but are within the EIR/EBS in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.12 | ColumntnEthSoamPmEvcHistoryStatsRedFramesRx | read-only | current | This object contains the number of inbound frames not conforming to either the CIR/CBS or the EIR/EBS in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.13 | ColumntnEthSoamPmEvcHistoryStatsRedBytesRx | read-only | current | This object contains the number of inbound bytes, where frames do not conform to either the CIR/CBS or the EIR/EBS in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.14 | ColumntnEthSoamPmEvcHistoryStatsDiscardFramesTx | read-only | current | This object contains the number of outbound frames which were chosen to be discarded in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.15 | ColumntnEthSoamPmEvcHistoryStatsDiscardFramesRx | read-only | current | This object contains the number of inbound frames which were chosen to be discarded in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.16 | ColumntnEthSoamPmEvcHistoryStatsDiscardBytesTx | read-only | current | This object contains the number of outbound bytes which were chosen to be discarded in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.3.1.1.17 | ColumntnEthSoamPmEvcHistoryStatsDiscardBytesRx | read-only | current | This object contains the number of inbound bytes which were chosen to be discarded in this EVC for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4 | NodetnEthSoamPmEceStatsObjects | |||
| 1.3.6.1.4.1.868.2.5.143.2.4.1 | TabletnEthSoamPmEceHistoryStatsTable | not-accessible | current | This table contains the results for history Measurement Intervals in a SOAM EVC Extention (ECE) Measurement session. It provides port statistics for the UNI po… |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1 | RowtnEthSoamPmEceHistoryStatsEntry | not-accessible | current | The conceptual row of tnEthSoamPmEceHistoryStatsTable |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.1 | ColumntnEthSoamPmEceHistoryStatsIndex | not-accessible | current | The index for the Measurement Interval within this PM session. Measurement Interval indexes are assigned sequentially by the device. The first Measurement Inte… |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.2 | ColumntnEthSoamPmEceHistoryStatsEndTime | read-only | current | The time that this Measurement Interval ended. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.3 | ColumntnEthSoamPmEceHistoryStatsElapsedTime | read-only | current | The time that this Measurement Interval has been running, in 0.01 seconds. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.4 | ColumntnEthSoamPmEceHistoryStatsGreenFramesTx | read-only | current | This object contains the number of outbound frames within the CIR / CBS compliance level in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.5 | ColumntnEthSoamPmEceHistoryStatsGreenFramesRx | read-only | current | This object contains the number of inbound frames within the CIR / CBS compliance level in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.6 | ColumntnEthSoamPmEceHistoryStatsGreenBytesTx | read-only | current | This object contains the number of outbound bytes, where frames are within the CIR / CBS compliance level in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.7 | ColumntnEthSoamPmEceHistoryStatsGreenBytesRx | read-only | current | This object contains the number of inbound bytes, where frames are within the CIR / CBS compliance level in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.8 | ColumntnEthSoamPmEceHistoryStatsYellowFramesTx | read-only | current | This object contains the number of outbound frames exceeding the CIR/CBS but within the EIR/EBS in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.9 | ColumntnEthSoamPmEceHistoryStatsYellowFramesRx | read-only | current | This object contains the number of inbound frames exceeding the CIR/CBS but within the EIR/EBS in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.10 | ColumntnEthSoamPmEceHistoryStatsYellowBytesTx | read-only | current | This object contains the number of outbound bytes, where frames exceed the CIR/CBS but are within the EIR/EBS in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.11 | ColumntnEthSoamPmEceHistoryStatsYellowBytesRx | read-only | current | This object contains the number of inbound bytes, where frames exceed the CIR/CBS but are within the EIR/EBS in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.12 | ColumntnEthSoamPmEceHistoryStatsRedFramesRx | read-only | current | This object contains the number of inbound frames not conforming to either the CIR/CBS or the EIR/EBS in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.13 | ColumntnEthSoamPmEceHistoryStatsRedBytesRx | read-only | current | This object contains the number of inbound bytes, where frames do not conform to either the CIR/CBS or the EIR/EBS in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.14 | ColumntnEthSoamPmEceHistoryStatsDiscardFramesTx | read-only | current | This object contains the number of outbound frames which were chosen to be discarded in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.15 | ColumntnEthSoamPmEceHistoryStatsDiscardFramesRx | read-only | current | This object contains the number of inbound frames which were chosen to be discarded in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.16 | ColumntnEthSoamPmEceHistoryStatsDiscardBytesTx | read-only | current | This object contains the number of outbound bytes which were chosen to be discarded in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.2.4.1.1.17 | ColumntnEthSoamPmEceHistoryStatsDiscardBytesRx | read-only | current | This object contains the number of inbound bytes which were chosen to be discarded in this ECE for this Measurement Interval. |
| 1.3.6.1.4.1.868.2.5.143.3 | NodetnEthSoamPmNotificationMIBObjects |