ZYXEL-XGS4700-48F-MIB
1134 objects
Fault event table definitions
Imported Objects
| BRIDGE-MIB | BridgeId dot1dBasePort Timeout |
| DISMAN-PING-MIB | -- RFC2851 OperationResponseStatus |
| IEEE8021-CFM-MIB | dot1agCfmMaIndex dot1agCfmMdIndex dot1agCfmMepIdentifier |
| IF-MIB | ifIndex InterfaceIndexOrZero -- RFC2863 |
| INET-ADDRESS-MIB | -- RFC2571 InetAddressType InetAddress |
| OSPF-MIB | ospfAddressLessIf ospfAreaId ospfIfIpAddress ospfLsdbAreaId ospfLsdbLsid ospfLsdbRouterId ospfLsdbType ospfNbrAddressLessIndex ospfNbrIpAddr ospfVirtIfAreaId ospfVirtIfNeighbor |
| P-BRIDGE-MIB | EnabledStatus |
| Q-BRIDGE-MIB | PortList |
| RFC1155-SMI | Counter enterprises TimeTicks |
| RFC1213-MIB | -- RFC2579 DisplayString sysObjectID |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | -- RFC2863 NOTIFICATION-TYPE Counter32 Counter64 Integer32 IpAddress OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | -- RFC2578 RowStatus DateAndTime MacAddress StorageType TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.890 | Nodezyxel | |||
| 1.3.6.1.4.1.890.1 | Nodeproducts | |||
| 1.3.6.1.4.1.890.1.5 | NodeaccessSwitch | |||
| 1.3.6.1.4.1.890.1.5.8 | NodeesSeries | |||
| 1.3.6.1.4.1.890.1.5.8.54 | Nodexgs4700-48f | |||
| 1.3.6.1.4.1.890.1.5.8.54.1 | NodesysInfo | |||
| 1.3.6.1.4.1.890.1.5.8.54.1.1 | ScalarsysSwPlatformMajorVers | read-only | mandatory | SW platform major version, e.g. 3. |
| 1.3.6.1.4.1.890.1.5.8.54.1.2 | ScalarsysSwPlatformMinorVers | read-only | mandatory | SW platform minor version, e.g. 50. |
| 1.3.6.1.4.1.890.1.5.8.54.1.3 | ScalarsysSwModelString | read-only | mandatory | Model letters, e.g. TJ |
| 1.3.6.1.4.1.890.1.5.8.54.1.4 | ScalarsysSwVersionControlNbr | read-only | mandatory | Version control number, e.g. 0. |
| 1.3.6.1.4.1.890.1.5.8.54.1.5 | ScalarsysSwDay | read-only | mandatory | SW compilation day, e.g. 19. |
| 1.3.6.1.4.1.890.1.5.8.54.1.6 | ScalarsysSwMonth | read-only | mandatory | SW compilation month, e.g. 8. |
| 1.3.6.1.4.1.890.1.5.8.54.1.7 | ScalarsysSwYear | read-only | mandatory | SW compilation year, e.g. 2004. |
| 1.3.6.1.4.1.890.1.5.8.54.1.8 | ScalarsysHwMajorVers | read-only | mandatory | HW major version number, e.g. 1. |
| 1.3.6.1.4.1.890.1.5.8.54.1.9 | ScalarsysHwMinorVers | read-only | mandatory | HW minor version number, e.g. 0. |
| 1.3.6.1.4.1.890.1.5.8.54.1.10 | ScalarsysSerialNumber | read-only | mandatory | Serial number |
| 1.3.6.1.4.1.890.1.5.8.54.2 | NoderateLimitSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.2.1 | ScalarrateLimitState | read-write | mandatory | Ingress/egress rate limiting enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.54.2.2 | TablerateLimitPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.2.2.1 | RowrateLimitPortEntry | not-accessible | mandatory | An entry in rateLimitPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.2.2.1.1 | ColumnrateLimitPortState | read-write | mandatory | Ingress/egress rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.2.2.1.2 | ColumnrateLimitPortCommitRate | read-write | mandatory | Commit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000. |
| 1.3.6.1.4.1.890.1.5.8.54.2.2.1.3 | ColumnrateLimitPortPeakRate | read-write | mandatory | Peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000. |
| 1.3.6.1.4.1.890.1.5.8.54.2.2.1.4 | ColumnrateLimitPortEgrRate | read-write | mandatory | Egress rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000. |
| 1.3.6.1.4.1.890.1.5.8.54.2.2.1.5 | ColumnrateLimitPortPeakState | read-write | mandatory | Ingress peak rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.2.2.1.6 | ColumnrateLimitPortEgrState | read-write | mandatory | Egress rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.2.2.1.7 | ColumnrateLimitPortCommitState | read-write | mandatory | Ingress commit rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.3 | NodebrLimitSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.3.1 | ScalarbrLimitState | read-write | mandatory | Broadcast/multicast/DLF rate limiting enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.54.3.2 | TablebrLimitPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.3.2.1 | RowbrLimitPortEntry | not-accessible | mandatory | An entry in brLimitPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.3.2.1.1 | ColumnbrLimitPortBrState | read-write | mandatory | Broadcast rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.3.2.1.2 | ColumnbrLimitPortBrRate | read-write | mandatory | Allowed broadcast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
| 1.3.6.1.4.1.890.1.5.8.54.3.2.1.3 | ColumnbrLimitPortMcState | read-write | mandatory | Multicast rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.3.2.1.4 | ColumnbrLimitPortMcRate | read-write | mandatory | AAllowed mullticast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
| 1.3.6.1.4.1.890.1.5.8.54.3.2.1.5 | ColumnbrLimitPortDlfState | read-write | mandatory | Destination lookup failure frames rate limiting enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.3.2.1.6 | ColumnbrLimitPortDlfRate | read-write | mandatory | Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
| 1.3.6.1.4.1.890.1.5.8.54.4 | NodeportSecuritySetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.4.1 | ScalarportSecurityState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.4.2 | TableportSecurityPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.4.2.1 | RowportSecurityPortEntry | not-accessible | mandatory | An entry in portSecurityPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.4.2.1.1 | ColumnportSecurityPortState | read-write | mandatory | Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynami… |
| 1.3.6.1.4.1.890.1.5.8.54.4.2.1.2 | ColumnportSecurityPortLearnState | read-write | mandatory | MAC address learning enabled/disable on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.4.2.1.3 | ColumnportSecurityPortCount | read-write | mandatory | Number of (dynamic) MAC addresses that may be learned on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.4.3 | ScalarportSecurityMacFreeze | read-write | mandatory | This entry is used to execute MacFreeze action to port. It's meaningless while reading this entry. |
| 1.3.6.1.4.1.890.1.5.8.54.4.4 | TableportSecurityVMLTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.4.4.1 | RowportSecurityVMLEntry | not-accessible | mandatory | An entry in portSecurityVMLTable. |
| 1.3.6.1.4.1.890.1.5.8.54.4.4.1.1 | ColumnportSecurityVMLPort | read-only | mandatory | The configured port number of VLAN MAC Limit. |
| 1.3.6.1.4.1.890.1.5.8.54.4.4.1.2 | ColumnportSecurityVMLVID | read-only | mandatory | The configured VLAN number of VLAN MAC Limit. |
| 1.3.6.1.4.1.890.1.5.8.54.4.4.1.3 | ColumnportSecurityVMLMacLimit | read-write | mandatory | The MAC limit of specific port and VLAN. |
| 1.3.6.1.4.1.890.1.5.8.54.4.4.1.4 | ColumnportSecurityVMLRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.5 | NodevlanTrunkSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.5.1 | TablevlanTrunkPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.5.1.1 | RowvlanTrunkPortEntry | not-accessible | mandatory | An entry in vlanTrunkPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.5.1.1.1 | ColumnvlanTrunkPortState | read-write | mandatory | VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch. |
| 1.3.6.1.4.1.890.1.5.8.54.6 | NodectlProtTransSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.6.1 | ScalarctlProtTransState | read-write | mandatory | Bridge control protocol transparency enabled/disabled for the switch |
| 1.3.6.1.4.1.890.1.5.8.54.6.2 | TablectlProtTransTunnelPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.6.2.1 | RowctlProtTransTunnelPortEntry | not-accessible | mandatory | An entry in ctlProtTransTunnelPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.6.2.1.1 | ColumnctlProtTransTunnelMode | read-write | mandatory | Bridge control protocol transparency mode for the port. Modes: Peer(0), Tunnel(1), Discard(2), Network(3) |
| 1.3.6.1.4.1.890.1.5.8.54.7 | NodevlanStackSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.7.1 | ScalarvlanStackState | read-write | mandatory | VLAN Stacking enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.54.7.3 | TablevlanStackPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.7.3.1 | RowvlanStackPortEntry | not-accessible | mandatory | An entry in vlanStackPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.7.3.1.1 | ColumnvlanStackPortMode | read-write | mandatory | Mode of the port. Set Normal to have the switch ignore frames received (or transmitted) on this port with VLAN stacking tags. Anything you configure in SPVID a… |
| 1.3.6.1.4.1.890.1.5.8.54.7.3.1.2 | ColumnvlanStackPortVid | read-write | mandatory | VLAN ID used in service provider tag. |
| 1.3.6.1.4.1.890.1.5.8.54.7.3.1.3 | ColumnvlanStackPortPrio | read-write | mandatory | Priority value for service provider tag. 0 is the lowest priority level and 7 is the highest. |
| 1.3.6.1.4.1.890.1.5.8.54.7.3.1.4 | ColumnvlanStackTunnelPortTpid | read-write | mandatory | Tunnel Port TPID in hex format, e.g. 8100. |
| 1.3.6.1.4.1.890.1.5.8.54.7.4 | TableselectiveQinQTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.7.4.1 | RowselectiveQinQEntry | not-accessible | mandatory | An entry in selective qinq table |
| 1.3.6.1.4.1.890.1.5.8.54.7.4.1.1 | ColumnselectiveQinQName | read-write | mandatory | The name of selective qinq entry |
| 1.3.6.1.4.1.890.1.5.8.54.7.4.1.2 | ColumnselectiveQinQPort | read-only | mandatory | interface port id |
| 1.3.6.1.4.1.890.1.5.8.54.7.4.1.3 | ColumnselectiveQinQCvid | read-only | mandatory | inner vid |
| 1.3.6.1.4.1.890.1.5.8.54.7.4.1.4 | ColumnselectiveQinQSpvid | read-write | mandatory | outer vid |
| 1.3.6.1.4.1.890.1.5.8.54.7.4.1.5 | ColumnselectiveQinQPriority | read-write | mandatory | priority |
| 1.3.6.1.4.1.890.1.5.8.54.7.4.1.6 | ColumnselectiveQinQRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.8 | Nodedot1xSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.8.3 | ScalarportAuthState | read-write | mandatory | 802.1x port authentication enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.54.8.4 | TableportAuthTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.8.4.1 | RowportAuthEntry | not-accessible | mandatory | An entry in portAuthTable. |
| 1.3.6.1.4.1.890.1.5.8.54.8.4.1.1 | ColumnportAuthEntryState | read-write | mandatory | 802.1x port authentication enabled or disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.8.4.1.2 | ColumnportReAuthEntryState | read-write | mandatory | 802.1x port re-authentication enabled or disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.8.4.1.3 | ColumnportReAuthEntryTimer | read-write | mandatory | Re-authentication timer in seconds. |
| 1.3.6.1.4.1.890.1.5.8.54.8.4.1.4 | ColumnportAuthQuietPeriod | read-write | mandatory | Quiet period in seconds. |
| 1.3.6.1.4.1.890.1.5.8.54.8.4.1.5 | ColumnportAuthTxPeriod | read-write | mandatory | Tx period in seconds. |
| 1.3.6.1.4.1.890.1.5.8.54.8.4.1.6 | ColumnportAuthSupplicantTimeout | read-write | mandatory | Supplicant Timeout in seconds. |
| 1.3.6.1.4.1.890.1.5.8.54.8.4.1.7 | ColumnportAuthMaxRequest | read-write | mandatory | Max request. |
| 1.3.6.1.4.1.890.1.5.8.54.8.4.1.8 | ColumnportAuthGuestVlanState | read-write | mandatory | Guest Vlan State. |
| 1.3.6.1.4.1.890.1.5.8.54.8.4.1.9 | ColumnportAuthGuestVlan | read-write | mandatory | Guest Vlan ID. |
| 1.3.6.1.4.1.890.1.5.8.54.8.4.1.10 | ColumnportAuthGuestVlanHostMode | read-write | mandatory | Guest Vlan Host Mode. |
| 1.3.6.1.4.1.890.1.5.8.54.8.4.1.11 | ColumnportAuthGuestVlanHostModeMultiSecureNumber | read-write | mandatory | Guest Vlan Host Mode Multi-Secure number. |
| 1.3.6.1.4.1.890.1.5.8.54.9 | NodehwMonitorInfo | |||
| 1.3.6.1.4.1.890.1.5.8.54.9.1 | TablefanRpmTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.54.9.1.1 | RowfanRpmEntry | not-accessible | current | An entry in fanRpmTable. |
| 1.3.6.1.4.1.890.1.5.8.54.9.1.1.1 | ColumnfanRpmIndex | read-only | current | Index of FAN. |
| 1.3.6.1.4.1.890.1.5.8.54.9.1.1.2 | ColumnfanRpmCurValue | read-only | current | Current speed in Revolutions Per Minute (RPM) on the fan. |
| 1.3.6.1.4.1.890.1.5.8.54.9.1.1.3 | ColumnfanRpmMaxValue | read-only | current | Maximum speed measured in Revolutions Per Minute (RPM) on the fan. |
| 1.3.6.1.4.1.890.1.5.8.54.9.1.1.4 | ColumnfanRpmMinValue | read-only | current | Minimum speed measured in Revolutions Per Minute (RPM) on the fan. |
| 1.3.6.1.4.1.890.1.5.8.54.9.1.1.5 | ColumnfanRpmLowThresh | read-only | current | The minimum speed at which a normal fan should work. |
| 1.3.6.1.4.1.890.1.5.8.54.9.1.1.6 | ColumnfanRpmDescr | read-only | current | 'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed. |
| 1.3.6.1.4.1.890.1.5.8.54.9.2 | TabletempTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.54.9.2.1 | RowtempEntry | not-accessible | current | An entry in tempTable. |
| 1.3.6.1.4.1.890.1.5.8.54.9.2.1.1 | ColumntempIndex | read-only | current | Index of temperature unit. 1:MAC, 2:CPU, 3:PHY |
| 1.3.6.1.4.1.890.1.5.8.54.9.2.1.2 | ColumntempCurValue | read-only | current | The current temperature measured at this sensor. |
| 1.3.6.1.4.1.890.1.5.8.54.9.2.1.3 | ColumntempMaxValue | read-only | current | The maximum temperature measured at this sensor. |
| 1.3.6.1.4.1.890.1.5.8.54.9.2.1.4 | ColumntempMinValue | read-only | current | The minimum temperature measured at this sensor. |
| 1.3.6.1.4.1.890.1.5.8.54.9.2.1.5 | ColumntempHighThresh | read-only | current | The upper temperature limit at this sensor. |
| 1.3.6.1.4.1.890.1.5.8.54.9.2.1.6 | ColumntempDescr | read-only | current | 'Normal' indicates temperatures below the threshold and 'Error' for those above. |
| 1.3.6.1.4.1.890.1.5.8.54.9.3 | TablevoltageTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.54.9.3.1 | RowvoltageEntry | not-accessible | current | An entry in voltageTable. |
| 1.3.6.1.4.1.890.1.5.8.54.9.3.1.1 | ColumnvoltageIndex | read-only | current | Index of voltage. |
| 1.3.6.1.4.1.890.1.5.8.54.9.3.1.2 | ColumnvoltageCurValue | read-only | current | The current voltage reading. |
| 1.3.6.1.4.1.890.1.5.8.54.9.3.1.3 | ColumnvoltageMaxValue | read-only | current | The maximum voltage measured at this point. |
| 1.3.6.1.4.1.890.1.5.8.54.9.3.1.4 | ColumnvoltageMinValue | read-only | current | The minimum voltage measured at this point. |
| 1.3.6.1.4.1.890.1.5.8.54.9.3.1.5 | ColumnvoltageNominalValue | read-only | current | The normal voltage at wchich the switch work. |
| 1.3.6.1.4.1.890.1.5.8.54.9.3.1.6 | ColumnvoltageLowThresh | read-only | current | The minimum voltage at which the switch should work. |
| 1.3.6.1.4.1.890.1.5.8.54.9.3.1.7 | ColumnvoltageDescr | read-only | current | 'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed. |
| 1.3.6.1.4.1.890.1.5.8.54.10 | NodesnmpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.10.1 | ScalarsnmpGetCommunity | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.10.2 | ScalarsnmpSetCommunity | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.10.3 | ScalarsnmpTrapCommunity | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.10.4 | TablesnmpTrapDestTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.10.4.1 | RowsnmpTrapDestEntry | not-accessible | mandatory | An entry in snmpTrapDestTable. |
| 1.3.6.1.4.1.890.1.5.8.54.10.4.1.1 | ColumnsnmpTrapDestIP | read-only | mandatory | IP address of trap destination. |
| 1.3.6.1.4.1.890.1.5.8.54.10.4.1.2 | ColumnsnmpTrapDestRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.10.4.1.3 | ColumnsnmpTrapDestPort | read-write | mandatory | The UDP port of the trap destination. |
| 1.3.6.1.4.1.890.1.5.8.54.10.4.1.4 | ColumnsnmpTrapVersion | read-write | mandatory | The SNMP protocol version to send traps. |
| 1.3.6.1.4.1.890.1.5.8.54.10.4.1.5 | ColumnsnmpTrapUserName | read-write | mandatory | The user name for sending SNMPv3 traps. |
| 1.3.6.1.4.1.890.1.5.8.54.10.5 | ScalarsnmpVersion | read-write | mandatory | The SNMP version to be used. v3v2c means that the manager can get/set by SNMPv3 and can get by SNMPv2c. |
| 1.3.6.1.4.1.890.1.5.8.54.10.6 | TablesnmpUserTable | not-accessible | current | A table that contains SNMPv3 user information. |
| 1.3.6.1.4.1.890.1.5.8.54.10.6.1 | RowsnmpUserEntry | not-accessible | current | An entry of snmpUserTable. |
| 1.3.6.1.4.1.890.1.5.8.54.10.6.1.1 | ColumnsnmpUserName | read-only | current | The user name. |
| 1.3.6.1.4.1.890.1.5.8.54.10.6.1.2 | ColumnsnmpUserSecurityLevel | read-write | current | The level of security at which SNMP messages can be sent or with which operations are being processed. |
| 1.3.6.1.4.1.890.1.5.8.54.10.6.1.3 | ColumnsnmpUserAuthProtocol | read-write | current | The type of authentication protocol to be used. |
| 1.3.6.1.4.1.890.1.5.8.54.10.6.1.4 | ColumnsnmpUserPrivProtocol | read-write | current | The type of privacy protocol to be used. |
| 1.3.6.1.4.1.890.1.5.8.54.10.6.1.5 | ColumnsnmpUserGroup | read-only | current | The group name which this user belongs to. |
| 1.3.6.1.4.1.890.1.5.8.54.10.7 | TablesnmpTrapGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.10.7.1 | RowsnmpTrapGroupEntry | not-accessible | mandatory | An entry in snmpTrapGroupTable. |
| 1.3.6.1.4.1.890.1.5.8.54.10.7.1.1 | ColumnsnmpTrapSystemGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.10.7.1.2 | ColumnsnmpTrapInterfaceGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.10.7.1.3 | ColumnsnmpTrapAAAGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.10.7.1.4 | ColumnsnmpTrapIPGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.10.7.1.5 | ColumnsnmpTrapSwitchGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.11 | NodedateTimeSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.11.1 | ScalardateTimeServerType | read-write | mandatory | The time service protocol. |
| 1.3.6.1.4.1.890.1.5.8.54.11.2 | ScalardateTimeServerIP | read-write | mandatory | IP address of time server. |
| 1.3.6.1.4.1.890.1.5.8.54.11.3 | ScalardateTimeZone | read-write | mandatory | The time difference between UTC. Ex: +01 |
| 1.3.6.1.4.1.890.1.5.8.54.11.4 | ScalardateTimeNewDateYear | read-write | mandatory | The new date in year. |
| 1.3.6.1.4.1.890.1.5.8.54.11.5 | ScalardateTimeNewDateMonth | read-write | mandatory | The new date in month. |
| 1.3.6.1.4.1.890.1.5.8.54.11.6 | ScalardateTimeNewDateDay | read-write | mandatory | The new date in day. |
| 1.3.6.1.4.1.890.1.5.8.54.11.7 | ScalardateTimeNewTimeHour | read-write | mandatory | The new time in hour. |
| 1.3.6.1.4.1.890.1.5.8.54.11.8 | ScalardateTimeNewTimeMinute | read-write | mandatory | The new time in minute. |
| 1.3.6.1.4.1.890.1.5.8.54.11.9 | ScalardateTimeNewTimeSecond | read-write | mandatory | The new time in second. |
| 1.3.6.1.4.1.890.1.5.8.54.11.10 | NodedateTimeDaylightSavingTimeSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.11.10.1 | ScalardaylightSavingTimeState | read-write | mandatory | Daylight saving time service enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.54.11.10.2 | ScalardaylightSavingTimeStartDateWeek | read-write | mandatory | Daylight saving time service start week. |
| 1.3.6.1.4.1.890.1.5.8.54.11.10.3 | ScalardaylightSavingTimeStartDateDay | read-write | mandatory | Daylight saving time service start day. |
| 1.3.6.1.4.1.890.1.5.8.54.11.10.4 | ScalardaylightSavingTimeStartDateMonth | read-write | mandatory | Daylight saving time service start month. |
| 1.3.6.1.4.1.890.1.5.8.54.11.10.5 | ScalardaylightSavingTimeStartDateHour | read-write | mandatory | Daylight saving time service start time. |
| 1.3.6.1.4.1.890.1.5.8.54.11.10.6 | ScalardaylightSavingTimeEndDateWeek | read-write | mandatory | Daylight saving time service end week. |
| 1.3.6.1.4.1.890.1.5.8.54.11.10.7 | ScalardaylightSavingTimeEndDateDay | read-write | mandatory | Daylight saving time service end day. |
| 1.3.6.1.4.1.890.1.5.8.54.11.10.8 | ScalardaylightSavingTimeEndDateMonth | read-write | mandatory | Daylight saving time service end month. |
| 1.3.6.1.4.1.890.1.5.8.54.11.10.9 | ScalardaylightSavingTimeEndDateHour | read-write | mandatory | Daylight saving time service end time. |
| 1.3.6.1.4.1.890.1.5.8.54.12 | NodesysMgmt | |||
| 1.3.6.1.4.1.890.1.5.8.54.12.1 | ScalarsysMgmtConfigSave | read-write | mandatory | If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config w… |
| 1.3.6.1.4.1.890.1.5.8.54.12.2 | ScalarsysMgmtBootupConfig | read-write | mandatory | The setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to read index initially. You can ch… |
| 1.3.6.1.4.1.890.1.5.8.54.12.3 | ScalarsysMgmtReboot | read-write | mandatory | Reboot switch from SNMP. 1:Reboot, 0:Nothing |
| 1.3.6.1.4.1.890.1.5.8.54.12.4 | ScalarsysMgmtDefaultConfig | read-write | mandatory | Erase running config and reset to default. Note: This action can access all configuration includes user account and AA configuration. |
| 1.3.6.1.4.1.890.1.5.8.54.12.5 | ScalarsysMgmtLastActionStatus | read-only | mandatory | Display status of last mgmt action. |
| 1.3.6.1.4.1.890.1.5.8.54.12.6 | ScalarsysMgmtSystemStatus | read-only | mandatory | This variable indicates the status of the system. The sysMgmtAlarmStatus is a bit map represented a sum, therefore, it can represent multiple defects simultane… |
| 1.3.6.1.4.1.890.1.5.8.54.12.7 | ScalarsysMgmtCPUUsage | read-only | mandatory | Show device CPU load in %, it's the snapshot of CPU load when getting the values. |
| 1.3.6.1.4.1.890.1.5.8.54.12.8 | ScalarsysMgmtBootupImage | read-write | mandatory | The setting value (read index) will be written into non-volatile memory. When rebooting, the selected image will be used. You can change the value of write ind… |
| 1.3.6.1.4.1.890.1.5.8.54.12.9 | ScalarsysMgmtCounterReset | read-write | mandatory | Reset all port counters. |
| 1.3.6.1.4.1.890.1.5.8.54.12.10 | NodesysMgmtTftpServiceSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.12.10.1 | ScalarsysMgmtTftpServerIp | read-write | mandatory | IP address of TFTP server |
| 1.3.6.1.4.1.890.1.5.8.54.12.10.2 | ScalarsysMgmtTftpRemoteFileName | read-write | mandatory | The file name that you want to backup to or restore from TFTP server |
| 1.3.6.1.4.1.890.1.5.8.54.12.10.3 | ScalarsysMgmtTftpConfigIndex | read-write | mandatory | Index of system configuration which you want to restore. |
| 1.3.6.1.4.1.890.1.5.8.54.12.10.4 | ScalarsysMgmtTftpAction | read-write | mandatory | Action of tftp service. 1: Backup running-config to tftp server, 2: Restore config from tftp server, 3: Merge config from tftp server. Note: This action can ac… |
| 1.3.6.1.4.1.890.1.5.8.54.12.10.5 | ScalarsysMgmtTftpActionStatus | read-only | mandatory | Display status of mgmt action. |
| 1.3.6.1.4.1.890.1.5.8.54.12.10.113 | ScalarsysMgmtTftpActionPrivilege13 | read-write | mandatory | Action of tftp service. 1: Backup running-config to tftp server, 2: Restore config from tftp server, 3: Merge config from tftp server. Note: This action can ac… |
| 1.3.6.1.4.1.890.1.5.8.54.12.113 | ScalarsysMgmtConfigSavePrivilege13 | read-write | mandatory | If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config w… |
| 1.3.6.1.4.1.890.1.5.8.54.12.213 | ScalarsysMgmtDefaultConfigPrivilege13 | read-write | mandatory | Erase running config and reset to default. Note: This action can access configuration with privilege 13. |
| 1.3.6.1.4.1.890.1.5.8.54.13 | Nodelayer2Setup | |||
| 1.3.6.1.4.1.890.1.5.8.54.13.1 | ScalarvlanTypeSetup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.2 | ScalarigmpSnoopingStateSetup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.3 | ScalartagVlanPortIsolationState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.4 | ScalarstpState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.5 | ScalarigmpFilteringStateSetup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.6 | ScalarunknownMulticastFrameForwarding | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.7 | ScalarmulticastGrpHostTimeout | read-write | mandatory | Specify host timeout for all multicast groups when the specific port is in auto mode. |
| 1.3.6.1.4.1.890.1.5.8.54.13.9 | ScalarreservedMulticastFrameForwarding | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.10 | Scalarigmpsnp8021pPriority | read-write | mandatory | Set the 802.1p priority of control messages for igmp-snooping(0~8, 8-No Change) |
| 1.3.6.1.4.1.890.1.5.8.54.13.11 | ScalarigmpsnpVlanMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.12 | ScalarstpMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.13 | TableigmpsnpVlanTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.13.1 | RowigmpsnpVlanEntry | not-accessible | mandatory | An entry in IgmpsnpVlanTable. |
| 1.3.6.1.4.1.890.1.5.8.54.13.13.1.1 | ColumnigmpsnpVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.13.1.2 | ColumnigmpsnpVlanName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.13.1.3 | ColumnigmpsnpVlanRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.14 | ScalarigmpsnpQuerierMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.15 | ScalarethernetCfmStateSetup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.16 | ScalarlldpStateSetup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.13.17 | ScalarigmpSnpReportProxySetup | read-write | mandatory | IGMP Snooping report-proxy mode |
| 1.3.6.1.4.1.890.1.5.8.54.13.18 | ScalarsmartIsolationState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.14 | NodeipSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.14.1 | ScalardnsIpAddress | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.14.2 | ScalardefaultMgmt | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.14.3 | ScalardefaultGateway | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.14.4 | NodeoutOfBandIpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.14.4.1 | ScalaroutOfBandIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.14.4.2 | ScalaroutOfBandSubnetMask | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.14.4.3 | ScalaroutOfBandGateway | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.14.5 | ScalarmaxNumOfInbandIp | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.14.6 | TableinbandIpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.14.6.1 | RowinbandIpEntry | not-accessible | mandatory | An entry in inbandIpTable. |
| 1.3.6.1.4.1.890.1.5.8.54.14.6.1.1 | ColumninbandEntryIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.14.6.1.2 | ColumninbandEntrySubnetMask | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.14.6.1.3 | ColumninbandEntryVid | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.14.6.1.4 | ColumninbandEntryRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.15 | NodefilterSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.15.1 | TablefilterTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.15.1.1 | RowfilterEntry | not-accessible | mandatory | An entry in filterTable. |
| 1.3.6.1.4.1.890.1.5.8.54.15.1.1.1 | ColumnfilterName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.15.1.1.2 | ColumnfilterActionState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.15.1.1.3 | ColumnfilterMacAddr | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.15.1.1.4 | ColumnfilterVid | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.15.1.1.5 | ColumnfilterRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.16 | NodemirrorSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.16.1 | ScalarmirrorState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.16.2 | ScalarmirrorMonitorPort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.16.3 | TablemirrorTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.16.3.1 | RowmirrorEntry | not-accessible | mandatory | An entry in mirrorTable. |
| 1.3.6.1.4.1.890.1.5.8.54.16.3.1.1 | ColumnmirrorMirroredState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.16.3.1.2 | ColumnmirrorDirection | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.17 | NodeaggrSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.17.1 | ScalaraggrState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.17.2 | ScalaraggrSystemPriority | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.17.3 | TableaggrGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.17.3.1 | RowaggrGroupEntry | not-accessible | mandatory | An entry in aggrGroupTable. |
| 1.3.6.1.4.1.890.1.5.8.54.17.3.1.1 | ColumnaggrGroupIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.17.3.1.2 | ColumnaggrGroupState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.17.3.1.3 | ColumnaggrGroupDynamicState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.17.3.1.4 | ColumnaggrGroupCriteria | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.17.4 | TableaggrPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.17.4.1 | RowaggrPortEntry | not-accessible | mandatory | An entry in aggrPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.17.4.1.1 | ColumnaggrPortGroup | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.17.4.1.2 | ColumnaggrPortDynamicStateTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.18 | NodeaccessCtlSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.18.1 | TableaccessCtlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.18.1.1 | RowaccessCtlEntry | not-accessible | mandatory | An entry in accessCtlTable. |
| 1.3.6.1.4.1.890.1.5.8.54.18.1.1.1 | ColumnaccessCtlService | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.18.1.1.2 | ColumnaccessCtlEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.18.1.1.3 | ColumnaccessCtlServicePort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.18.1.1.4 | ColumnaccessCtlTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.18.2 | TablesecuredClientTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.18.2.1 | RowsecuredClientEntry | not-accessible | mandatory | An entry in securedClientTable. |
| 1.3.6.1.4.1.890.1.5.8.54.18.2.1.1 | ColumnsecuredClientIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.18.2.1.2 | ColumnsecuredClientEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.18.2.1.3 | ColumnsecuredClientStartIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.18.2.1.4 | ColumnsecuredClientEndIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.18.2.1.5 | ColumnsecuredClientService | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.19 | NodequeuingMethodSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.19.1 | TableportQueuingMethodTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.19.1.1 | RowportQueuingMethodEntry | not-accessible | mandatory | An entry in portQueuingMethodTable. |
| 1.3.6.1.4.1.890.1.5.8.54.19.1.1.1 | ColumnportQueuingMethodQueue | read-only | mandatory | 0...7 |
| 1.3.6.1.4.1.890.1.5.8.54.19.1.1.2 | ColumnportQueuingMethodWeight | read-write | mandatory | 0...15 |
| 1.3.6.1.4.1.890.1.5.8.54.19.1.1.3 | ColumnportQueuingMethodMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.19.2 | TableportQueuingMethodHybridSpqTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.19.2.1 | RowportQueuingMethodHybridSpqEntry | not-accessible | mandatory | An entry in portQueuingMethodTable. |
| 1.3.6.1.4.1.890.1.5.8.54.19.2.1.1 | ColumnportQueuingMethodHybridSpq | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20 | NodedhcpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.20.1 | NodeglobalDhcpRelay | |||
| 1.3.6.1.4.1.890.1.5.8.54.20.1.1 | ScalarglobalDhcpRelayEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.1.2 | ScalarglobalDhcpRelayOption82Enable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.1.3 | ScalarglobalDhcpRelayInfoEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.1.4 | ScalarglobalDhcpRelayInfoData | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.1.5 | ScalarmaxNumberOfGlobalDhcpRelayRemoteServer | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.1.6 | TableglobalDhcpRelayRemoteServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.1.6.1 | RowglobalDhcpRelayRemoteServerEntry | not-accessible | mandatory | An entry in globalDhcpRelayRemoteServerTable. |
| 1.3.6.1.4.1.890.1.5.8.54.20.1.6.1.1 | ColumnglobalDhcpRelayRemoteServerIp | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.1.6.1.2 | ColumnglobalDhcpRelayRemoteServerRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.2 | NodedhcpServer | |||
| 1.3.6.1.4.1.890.1.5.8.54.20.2.1 | ScalarmaxNumberOfDhcpServers | read-only | mandatory | The maximum number of DHCP server entries that can be created. A value of 0 for this object implies that there exists settings for global DHCP relay. |
| 1.3.6.1.4.1.890.1.5.8.54.20.2.2 | TabledhcpServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.2.2.1 | RowdhcpServerEntry | not-accessible | mandatory | An entry in dhcpServerTable. |
| 1.3.6.1.4.1.890.1.5.8.54.20.2.2.1.1 | ColumndhcpServerVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.2.2.1.2 | ColumndhcpServerStartAddr | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.2.2.1.3 | ColumndhcpServerPoolSize | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.2.2.1.4 | ColumndhcpServerMask | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.2.2.1.5 | ColumndhcpServerGateway | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.2.2.1.6 | ColumndhcpServerPrimaryDNS | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.2.2.1.7 | ColumndhcpServerSecondaryDNS | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.2.2.1.8 | ColumndhcpServerRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.3 | NodedhcpRelay | |||
| 1.3.6.1.4.1.890.1.5.8.54.20.3.1 | ScalardhcpRelayInfoData | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.3.2 | ScalarmaxNumberOfDhcpRelay | read-only | mandatory | The maximum number of DHCP relay entries that can be created. A value of 0 for this object implies that there exists settings for global DHCP relay. |
| 1.3.6.1.4.1.890.1.5.8.54.20.3.3 | ScalarmaxNumberOfDhcpRelayRemoteServer | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.3.4 | TabledhcpRelayRemoteServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.3.4.1 | RowdhcpRelayRemoteServerEntry | not-accessible | mandatory | An entry in dhcpRelayRemoteServerTable. |
| 1.3.6.1.4.1.890.1.5.8.54.20.3.4.1.1 | ColumndhcpRelayVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.3.4.1.2 | ColumndhcpRelayRemoteServerIp | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.3.4.1.3 | ColumndhcpRelayRemoteServerRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.3.5 | TabledhcpRelayTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.3.5.1 | RowdhcpRelayEntry | not-accessible | mandatory | An entry in dhcpRelayTable. |
| 1.3.6.1.4.1.890.1.5.8.54.20.3.5.1.1 | ColumndhcpRelayOption82Enable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.20.3.5.1.2 | ColumndhcpRelayInfoEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.22 | NodearpInfo | |||
| 1.3.6.1.4.1.890.1.5.8.54.22.1 | TablearpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.22.1.1 | RowarpEntry | not-accessible | mandatory | An entry in arpTable. |
| 1.3.6.1.4.1.890.1.5.8.54.22.1.1.1 | ColumnarpIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.22.1.1.2 | ColumnarpIpAddr | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.22.1.1.3 | ColumnarpMacAddr | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.22.1.1.4 | ColumnarpMacVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.22.1.1.5 | ColumnarpType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.23 | NodeportOpModeSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.23.1 | TableportOpModePortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.23.1.1 | RowportOpModePortEntry | not-accessible | mandatory | An entry in portOpModePortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.23.1.1.1 | ColumnportOpModePortSpeedDuplex | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.23.1.1.2 | ColumnportOpModePortFlowCntl | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.23.1.1.3 | ColumnportOpModePortName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.23.1.1.4 | ColumnportOpModePortModuleType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.23.1.1.5 | ColumnportOpModePortLinkUpType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.23.1.1.7 | ColumnportOpModePortLBTestStatus | read-only | mandatory | This entry display latest loopback test status of port while performing loopback test. |
| 1.3.6.1.4.1.890.1.5.8.54.23.1.1.8 | ColumnportOpModePortCounterReset | read-write | mandatory | This entry resets port counter. |
| 1.3.6.1.4.1.890.1.5.8.54.23.1.1.9 | ColumnportOpModePortCX4CableLength | read-write | optional | The length of CX4 Cable. |
| 1.3.6.1.4.1.890.1.5.8.54.24 | NodeportBasedVlanSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.24.1 | TableportBasedVlanPortListTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.24.1.1 | RowportBasedVlanPortListEntry | not-accessible | mandatory | An entry in portBasedVlanPortListTable. |
| 1.3.6.1.4.1.890.1.5.8.54.24.1.1.1 | ColumnportBasedVlanPortListMembers | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.25 | NodemulticastPortSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.25.1 | TablemulticastPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.25.1.1 | RowmulticastPortEntry | not-accessible | mandatory | An entry in multicastPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.25.1.1.2 | ColumnmulticastPortMaxGroupLimited | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.25.1.1.3 | ColumnmulticastPortMaxOfGroup | read-write | mandatory | 0..255 |
| 1.3.6.1.4.1.890.1.5.8.54.25.1.1.4 | ColumnmulticastPortIgmpFilteringProfile | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.25.1.1.5 | ColumnmulticastPortQuerierMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.25.1.1.6 | ColumnmulticastPortThrottlingAction | read-write | mandatory | Specify throttling action for each port |
| 1.3.6.1.4.1.890.1.5.8.54.25.1.1.7 | ColumnmulticastPortLeaveMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.25.1.1.8 | ColumnmulticastPortLeaveTimeout | read-write | mandatory | 200..6348800 |
| 1.3.6.1.4.1.890.1.5.8.54.25.1.1.9 | ColumnmulticastPortFastLeaveTimeout | read-write | mandatory | 200..6348800 |
| 1.3.6.1.4.1.890.1.5.8.54.26 | NodemulticastStatus | |||
| 1.3.6.1.4.1.890.1.5.8.54.26.1 | TablemulticastStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.1.1 | RowmulticastStatusEntry | not-accessible | mandatory | An entry in multicastStatusTable. |
| 1.3.6.1.4.1.890.1.5.8.54.26.1.1.1 | ColumnmulticastStatusIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.1.1.2 | ColumnmulticastStatusVlanID | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.1.1.3 | ColumnmulticastStatusPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.1.1.4 | ColumnmulticastStatusGroup | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.2 | TablemulticastVlanStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.2.1 | RowmulticastVlanStatusEntry | not-accessible | mandatory | An entry in multicastVlanStatusTable. |
| 1.3.6.1.4.1.890.1.5.8.54.26.2.1.1 | ColumnmulticastVlanStatusVlanID | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.2.1.2 | ColumnmulticastVlanStatusType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.2.1.3 | ColumnmulticastVlanQueryPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3 | TableigmpSnpCountTable | not-accessible | mandatory | A count table of igmp query/report/leave message. |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1 | RowigmpSnpCountEntry | not-accessible | mandatory | An entry in igmpSnpCountTable. |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.1 | ColumnigmpSnpCountIndex | read-only | mandatory | Index of IgmpCountEntry. 0 means total count in whole system |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.2 | ColumnigmpSnpV2CountQueryRx | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.3 | ColumnigmpSnpV2CountReportRx | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.4 | ColumnigmpSnpV2CountLeaveRx | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.5 | ColumnigmpSnpV2CountQueryRxDrop | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.6 | ColumnigmpSnpV2CountReportRxDrop | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.7 | ColumnigmpSnpV2CountLeaveRxDrop | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.8 | ColumnigmpSnpV2CountQueryTx | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.9 | ColumnigmpSnpV2CountReportTx | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.10 | ColumnigmpSnpV2CountLeaveTx | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.11 | ColumnigmpSnpV3CountQueryRx | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.12 | ColumnigmpSnpV3CountReportRx | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.13 | ColumnigmpSnpV3CountQueryRxDrop | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.14 | ColumnigmpSnpV3CountReportRxDrop | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.15 | ColumnigmpSnpV3CountQueryTx | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.3.1.16 | ColumnigmpSnpV3CountReportTx | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.4 | TableigmpSnpCountVlanTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1 | RowigmpSnpCountVlanEntry | not-accessible | mandatory | An entry in igmpGroupVlanStatus. |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.1 | ColumnigmpSnpCountVlanIndex | read-only | mandatory | Input vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.2 | ColumnigmpSnpV2CountVlanQueryRx | read-only | mandatory | show igmpsnp Query Rx counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.3 | ColumnigmpSnpV2CountVlanReportRx | read-only | mandatory | show igmpsnp Report Rx counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.4 | ColumnigmpSnpV2CountVlanLeaveRx | read-only | mandatory | show igmpsnp Leave Rx counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.5 | ColumnigmpSnpV2CountVlanQueryRxDrop | read-only | mandatory | show igmpsnp Query Rx Error counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.6 | ColumnigmpSnpV2CountVlanReportRxDrop | read-only | mandatory | show igmpsnp Report Rx Error counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.7 | ColumnigmpSnpV2CountVlanLeaveRxDrop | read-only | mandatory | show igmpsnp Leave Rx Error counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.8 | ColumnigmpSnpV2CountVlanQueryTx | read-only | mandatory | show igmpsnp Query Tx counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.9 | ColumnigmpSnpV2CountVlanReportTx | read-only | mandatory | show igmpsnp Report Tx counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.10 | ColumnigmpSnpV2CountVlanLeaveTx | read-only | mandatory | show igmpsnp Leave Tx counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.11 | ColumnigmpSnpV3CountVlanQueryRx | read-only | mandatory | show igmpsnp Query Rx counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.12 | ColumnigmpSnpV3CountVlanReportRx | read-only | mandatory | show igmpsnp Report Rx counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.13 | ColumnigmpSnpV3CountVlanQueryRxDrop | read-only | mandatory | show igmpsnp Query Rx Error counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.14 | ColumnigmpSnpV3CountVlanReportRxDrop | read-only | mandatory | show igmpsnp Report Rx Error counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.15 | ColumnigmpSnpV3CountVlanQueryTx | read-only | mandatory | show igmpsnp Query Tx counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.4.1.16 | ColumnigmpSnpV3CountVlanReportTx | read-only | mandatory | show igmpsnp Report Tx counters for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.5 | TableigmpSnpCountPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.5.1 | RowigmpSnpCountPortEntry | not-accessible | mandatory | An entry in igmpSnpCountPortStatus. |
| 1.3.6.1.4.1.890.1.5.8.54.26.5.1.1 | ColumnigmpSnpV2CountPortQueryRx | read-only | mandatory | show igmpsnp Query Rx counters for port |
| 1.3.6.1.4.1.890.1.5.8.54.26.5.1.2 | ColumnigmpSnpV2CountPortReportRx | read-only | mandatory | show igmpsnp Report Rx counters for port |
| 1.3.6.1.4.1.890.1.5.8.54.26.5.1.3 | ColumnigmpSnpV2CountPortLeaveRx | read-only | mandatory | show igmpsnp Leave Rx counters for port |
| 1.3.6.1.4.1.890.1.5.8.54.26.5.1.4 | ColumnigmpSnpV2CountPortReportRxDrop | read-only | mandatory | show igmpsnp Report Rx Error counters for port |
| 1.3.6.1.4.1.890.1.5.8.54.26.5.1.5 | ColumnigmpSnpV2CountPortLeaveRxDrop | read-only | mandatory | show igmpsnp Leave Rx Error counters for port |
| 1.3.6.1.4.1.890.1.5.8.54.26.5.1.6 | ColumnigmpSnpV2CountPortReportTx | read-only | mandatory | show igmpsnp Report Tx counters for port |
| 1.3.6.1.4.1.890.1.5.8.54.26.5.1.7 | ColumnigmpSnpV2CountPortLeaveTx | read-only | mandatory | show igmpsnp Leave Tx counters for port |
| 1.3.6.1.4.1.890.1.5.8.54.26.5.1.8 | ColumnigmpSnpV3CountPortQueryRx | read-only | mandatory | show igmpsnp Query Rx counters for port |
| 1.3.6.1.4.1.890.1.5.8.54.26.5.1.9 | ColumnigmpSnpV3CountPortReportRx | read-only | mandatory | show igmpsnp Report Rx counters for port |
| 1.3.6.1.4.1.890.1.5.8.54.26.5.1.10 | ColumnigmpSnpV3CountPortReportRxDrop | read-only | mandatory | show igmpsnp Report Rx Error counters for port |
| 1.3.6.1.4.1.890.1.5.8.54.26.5.1.11 | ColumnigmpSnpV3CountPortReportTx | read-only | mandatory | show igmpsnp Report Tx counters for port |
| 1.3.6.1.4.1.890.1.5.8.54.26.6 | NodeigmpSnpGroupCountStatus | |||
| 1.3.6.1.4.1.890.1.5.8.54.26.6.1 | ScalarigmpSnpGroupCountNum | read-only | mandatory | Show total IGMP snooping group number |
| 1.3.6.1.4.1.890.1.5.8.54.26.6.2 | TableigmpSnpGroupCountVlanTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.6.2.1 | RowigmpSnpGroupCountVlanEntry | not-accessible | mandatory | An entry in igmpSnpGroupVlanStatus. |
| 1.3.6.1.4.1.890.1.5.8.54.26.6.2.1.1 | ColumnigmpSnpGroupCountVlanIndex | read-only | mandatory | Show IGMP snooping group index for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.6.2.1.2 | ColumnigmpSnpGroupCountVlanNum | read-only | mandatory | Show IGMP snooping group number for vlan |
| 1.3.6.1.4.1.890.1.5.8.54.26.6.3 | TableigmpSnpGroupCountPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.26.6.3.1 | RowigmpSnpGroupCountPortEntry | not-accessible | mandatory | An entry in igmpGroupCountPortStatus. |
| 1.3.6.1.4.1.890.1.5.8.54.26.6.3.1.1 | ColumnigmpSnpGroupCountPortNum | read-only | mandatory | Show IGMP snooping group number for port |
| 1.3.6.1.4.1.890.1.5.8.54.27 | NodeigmpFilteringProfileSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.27.1 | ScalarigmpFilteringMaxNumberOfProfile | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.27.2 | TableigmpFilteringProfileTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.27.2.1 | RowigmpFilteringProfileEntry | not-accessible | mandatory | An entry in igmpFilteringProfileTable. |
| 1.3.6.1.4.1.890.1.5.8.54.27.2.1.1 | ColumnigmpFilteringProfileName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.27.2.1.2 | ColumnigmpFilteringProfileStartAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.27.2.1.3 | ColumnigmpFilteringProfileEndAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.27.2.1.4 | ColumnigmpFilteringProfileRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28 | NodemvrSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.28.1 | ScalarmaxNumberOfMVR | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28.2 | TablemvrTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28.2.1 | RowmvrEntry | not-accessible | mandatory | An entry in mvrTable. |
| 1.3.6.1.4.1.890.1.5.8.54.28.2.1.1 | ColumnmvrVlanID | read-only | mandatory | 1..4094 |
| 1.3.6.1.4.1.890.1.5.8.54.28.2.1.2 | ColumnmvrName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28.2.1.3 | ColumnmvrMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28.2.1.4 | ColumnmvrRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28.2.1.5 | Columnmvr8021pPriority | read-write | mandatory | Set the 802.1p priority of control messages within MVR (0~7) |
| 1.3.6.1.4.1.890.1.5.8.54.28.3 | TablemvrPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28.3.1 | RowmvrPortEntry | not-accessible | mandatory | An entry in mvrPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.28.3.1.1 | ColumnmvrPortRole | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28.3.1.2 | ColumnmvrPortTagging | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28.4 | ScalarmaxNumberOfMvrGroup | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28.5 | TablemvrGroupTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28.5.1 | RowmvrGroupEntry | not-accessible | mandatory | An entry in mvrGroupTable. |
| 1.3.6.1.4.1.890.1.5.8.54.28.5.1.1 | ColumnmvrGroupName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28.5.1.2 | ColumnmvrGroupStartAddress | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28.5.1.3 | ColumnmvrGroupEndAddress | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.28.5.1.4 | ColumnmvrGroupRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29 | NodeclusterSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.29.1 | NodeclusterManager | |||
| 1.3.6.1.4.1.890.1.5.8.54.29.1.1 | ScalarclusterMaxNumOfManager | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.1.2 | TableclusterManagerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.1.2.1 | RowclusterManagerEntry | not-accessible | mandatory | An entry in clusterManagerTable. |
| 1.3.6.1.4.1.890.1.5.8.54.29.1.2.1.1 | ColumnclusterManagerVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.1.2.1.2 | ColumnclusterManagerName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.1.2.1.3 | ColumnclusterManagerRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.2 | NodeclusterMembers | |||
| 1.3.6.1.4.1.890.1.5.8.54.29.2.1 | ScalarclusterMaxNumOfMember | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.2.2 | TableclusterMemberTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.2.2.1 | RowclusterMemberEntry | not-accessible | mandatory | An entry in clusterMemberTable. |
| 1.3.6.1.4.1.890.1.5.8.54.29.2.2.1.1 | ColumnclusterMemberMac | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.2.2.1.2 | ColumnclusterMemberName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.2.2.1.3 | ColumnclusterMemberModel | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.2.2.1.4 | ColumnclusterMemberPassword | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.2.2.1.5 | ColumnclusterMemberRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.3 | NodeclusterCandidates | |||
| 1.3.6.1.4.1.890.1.5.8.54.29.3.1 | TableclusterCandidateTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.3.1.1 | RowclusterCandidateEntry | not-accessible | mandatory | An entry in clusterCandidateTable. |
| 1.3.6.1.4.1.890.1.5.8.54.29.3.1.1.1 | ColumnclusterCandidateMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.3.1.1.2 | ColumnclusterCandidateName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.3.1.1.3 | ColumnclusterCandidateModel | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.4 | NodeclusterStatus | |||
| 1.3.6.1.4.1.890.1.5.8.54.29.4.1 | ScalarclusterStatusRole | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.4.2 | ScalarclusterStatusManager | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.4.3 | ScalarclsuterStatusMaxNumOfMember | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.4.4 | TableclusterStatusMemberTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.4.4.1 | RowclusterStatusMemberEntry | not-accessible | mandatory | An entry in clusterStatusMemberTable. |
| 1.3.6.1.4.1.890.1.5.8.54.29.4.4.1.1 | ColumnclusterStatusMemberMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.4.4.1.2 | ColumnclusterStatusMemberName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.4.4.1.3 | ColumnclusterStatusMemberModel | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.29.4.4.1.4 | ColumnclusterStatusMemberStatus | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.30 | IdentityfaultMIB | Fault event table definitions | ||
| 1.3.6.1.4.1.890.1.5.8.54.30.1 | NodeeventObjects | |||
| 1.3.6.1.4.1.890.1.5.8.54.30.1.1 | TableeventTable | not-accessible | current | A list of currently active fault events. All faults of normal type regardless of their severity level are recorded in the event table. When a normal type fault… |
| 1.3.6.1.4.1.890.1.5.8.54.30.1.1.1 | RoweventEntry | not-accessible | current | An entry containing information about an event in the event table. |
| 1.3.6.1.4.1.890.1.5.8.54.30.1.1.1.1 | ColumneventSeqNum | read-only | current | This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps a… |
| 1.3.6.1.4.1.890.1.5.8.54.30.1.1.1.2 | ColumneventEventId | read-only | current | This variable represents the event ID which uniquely identifies the event in the entire system. |
| 1.3.6.1.4.1.890.1.5.8.54.30.1.1.1.3 | ColumneventName | read-only | current | This variable represents the name of the event, for example 'Ethernet Link Down' |
| 1.3.6.1.4.1.890.1.5.8.54.30.1.1.1.4 | ColumneventInstanceType | read-only | current | This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generat… |
| 1.3.6.1.4.1.890.1.5.8.54.30.1.1.1.5 | ColumneventInstanceId | read-only | current | This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this e… |
| 1.3.6.1.4.1.890.1.5.8.54.30.1.1.1.6 | ColumneventInstanceName | read-only | current | This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooli… |
| 1.3.6.1.4.1.890.1.5.8.54.30.1.1.1.7 | ColumneventSeverity | read-only | current | This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events a… |
| 1.3.6.1.4.1.890.1.5.8.54.30.1.1.1.8 | ColumneventSetTime | read-only | current | This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM. |
| 1.3.6.1.4.1.890.1.5.8.54.30.1.1.1.9 | ColumneventDescription | read-only | current | This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating… |
| 1.3.6.1.4.1.890.1.5.8.54.30.1.1.1.10 | ColumneventServAffective | read-only | current | This variable indicates whether the event is service affective or not |
| 1.3.6.1.4.1.890.1.5.8.54.30.1.1.1.11 | ColumneventInstanceIdNumber | read-only | current | This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this e… |
| 1.3.6.1.4.1.890.1.5.8.54.31 | IdentityfaultTrapsMIB | Fault event trap definitions | ||
| 1.3.6.1.4.1.890.1.5.8.54.31.1 | NodetrapInfoObjects | |||
| 1.3.6.1.4.1.890.1.5.8.54.31.1.1 | ScalartrapRefSeqNum | read-only | current | Indicates the former sequence number of a cleared event in the event table. Not intended to read but only used in trap notifications. |
| 1.3.6.1.4.1.890.1.5.8.54.31.1.2 | ScalartrapPersistence | read-only | current | Indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). Not intended to read but only used in trap … |
| 1.3.6.1.4.1.890.1.5.8.54.31.1.3 | ScalartrapSenderNodeId | read-only | current | Represents the node ID of the sending network element. If not supported should be set to 0. Not intended to read but only used in trap notifications. |
| 1.3.6.1.4.1.890.1.5.8.54.31.1.4 | ScalartrapSenderStatus | read-only | current | Represents the trap status. 0 means cleared, 1 means happened. |
| 1.3.6.1.4.1.890.1.5.8.54.31.2 | NodetrapNotifications | |||
| 1.3.6.1.4.1.890.1.5.8.54.31.2.1 | NotificationeventOnTrap | current | This trap is used to inform network management system that a delta fault event (events that are automatically cleared) has occured or a normal fault event (not… | |
| 1.3.6.1.4.1.890.1.5.8.54.31.2.2 | NotificationeventClearedTrap | current | This trap is used to inform network management system that a normal type fault event has been cleared (state set off). Objects are used as follows: - eventSeqN… | |
| 1.3.6.1.4.1.890.1.5.8.54.32 | NodeprotoBasedVlanSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.32.1 | TableprotoBasedVlanTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.32.1.1 | RowprotoBasedVlanEntry | not-accessible | mandatory | An entry in protoBasedVlanTable. |
| 1.3.6.1.4.1.890.1.5.8.54.32.1.1.1 | ColumnprotoBasedVlanPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.32.1.1.2 | ColumnprotoBasedVlanPacketType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.32.1.1.3 | ColumnprotoBasedVlanEtherType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.32.1.1.4 | ColumnprotoBasedVlanName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.32.1.1.5 | ColumnprotoBasedVlanVid | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.32.1.1.6 | ColumnprotoBasedVlanPriority | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.32.1.1.7 | ColumnprotoBasedVlanState | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.33 | NodesysLogSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.33.1 | ScalarsysLogState | read-write | mandatory | sysLog enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.54.33.2 | TablesysLogTypeTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.33.2.1 | RowsysLogTypeEntry | not-accessible | mandatory | An entry in sysLogTypeTable. |
| 1.3.6.1.4.1.890.1.5.8.54.33.2.1.1 | ColumnsysLogTypeIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.33.2.1.2 | ColumnsysLogTypeName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.33.2.1.3 | ColumnsysLogTypeState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.33.2.1.4 | ColumnsysLogTypeFacility | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.33.3 | TablesysLogServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.33.3.1 | RowsysLogServerEntry | not-accessible | mandatory | An entry in sysLogServerTable. |
| 1.3.6.1.4.1.890.1.5.8.54.33.3.1.1 | ColumnsysLogServerAddress | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.33.3.1.2 | ColumnsysLogServerLogLevel | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.33.3.1.3 | ColumnsysLogServerRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.34 | NodediffservSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.34.1 | ScalardiffservState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.34.2 | TablediffservMapTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.34.2.1 | RowdiffservMapEntry | not-accessible | mandatory | An entry in diffservMapTable. |
| 1.3.6.1.4.1.890.1.5.8.54.34.2.1.1 | ColumndiffservMapDscp | read-only | mandatory | 0-63 |
| 1.3.6.1.4.1.890.1.5.8.54.34.2.1.2 | ColumndiffservMapPriority | read-write | mandatory | 0-7 |
| 1.3.6.1.4.1.890.1.5.8.54.34.3 | TablediffservPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.34.3.1 | RowdiffservPortEntry | not-accessible | mandatory | An entry in diffservPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.34.3.1.1 | ColumndiffservPortState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.35 | Nodelayer3Setup | |||
| 1.3.6.1.4.1.890.1.5.8.54.35.1 | ScalarrouterRipState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.35.2 | ScalarrouterIgmpState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.35.3 | ScalarrouterDvmrpState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.35.4 | ScalarrouterDvmrpThreshold | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.35.5 | ScalarloadSharing | read-write | mandatory | Enable/Disable IP load-sharing on the Switch |
| 1.3.6.1.4.1.890.1.5.8.54.35.6 | ScalarloadSharingCriteria | read-write | mandatory | the IP load-sharing distribution Criteria |
| 1.3.6.1.4.1.890.1.5.8.54.35.7 | ScalarloadSharingAgingTime | read-write | mandatory | The polling time of resolved next-hops for equal-cost multipath routes |
| 1.3.6.1.4.1.890.1.5.8.54.35.8 | ScalarloadSharingDiscoverTime | read-write | mandatory | The polling time of unresolved next-hops for equal-cost multipath routes |
| 1.3.6.1.4.1.890.1.5.8.54.35.9 | ScalarrouterRipDistance | read-write | mandatory | The administrative distance of RIP routes |
| 1.3.6.1.4.1.890.1.5.8.54.36 | NoderouterVrrpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.36.1 | ScalarrouterVrrpMaxNumber | read-only | mandatory | Always set it as 14. |
| 1.3.6.1.4.1.890.1.5.8.54.36.2 | TablerouterVrrpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.36.2.1 | RowrouterVrrpEntry | not-accessible | mandatory | An entry in routerVrrpTable. |
| 1.3.6.1.4.1.890.1.5.8.54.36.2.1.1 | ColumnrouterVrrpVirtualID | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.36.2.1.2 | ColumnrouterVrrpUplinkGateway | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.36.2.1.3 | ColumnrouterVrrpPreempt | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.36.2.1.4 | ColumnrouterVrrpInterval | read-write | mandatory | 1-255 |
| 1.3.6.1.4.1.890.1.5.8.54.36.2.1.5 | ColumnrouterVrrpPriority | read-write | mandatory | 1-254 |
| 1.3.6.1.4.1.890.1.5.8.54.36.2.1.6 | ColumnrouterVrrpPrimaryVirtualIP | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.36.2.1.7 | ColumnrouterVrrpName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.36.2.1.8 | ColumnrouterVrrpSecondaryVirtualIP | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.36.2.1.9 | ColumnrpVrrpRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.36.3 | TablerouterVrrpDomainTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.36.3.1 | RowrouterVrrpDomainEntry | not-accessible | mandatory | An entry in routerVrrpTable. |
| 1.3.6.1.4.1.890.1.5.8.54.36.3.1.1 | ColumnrouterVrrpAuthType | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.36.3.1.2 | ColumnrouterVrrpAuthKey | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.37 | NoderouterVrrpStatus | |||
| 1.3.6.1.4.1.890.1.5.8.54.37.1 | TablerouterVrrpStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.37.1.1 | RowrouterVrrpStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.37.1.1.1 | ColumnrouterVrrpStatusIpAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.37.1.1.2 | ColumnrouterVrrpStatusIpMaskBits | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.37.1.1.3 | ColumnrouterVrrpStatusVirtualID | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.37.1.1.4 | ColumnrouterVrrpStatusVRStatus | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.37.1.1.5 | ColumnrouterVrrpStatusUpLinkStatus | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.38 | NoderouterDomainSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.38.1 | TablerouterDomainTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.38.1.1 | RowrouterDomainEntry | not-accessible | mandatory | An entry in routerDomainTable. |
| 1.3.6.1.4.1.890.1.5.8.54.38.1.1.1 | ColumnrouterDomainIpAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.38.1.1.2 | ColumnrouterDomainIpMaskBits | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.38.1.1.3 | ColumnrouterDomainVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.38.2 | TablerouterDomainIpTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.38.2.1 | RowrouterDomainIpEntry | not-accessible | mandatory | An entry in routerDomainIpTable. |
| 1.3.6.1.4.1.890.1.5.8.54.38.2.1.1 | ColumnrouterDomainIpRipDirection | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.38.2.1.2 | ColumnrouterDomainIpRipVersion | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.38.2.1.3 | ColumnrouterDomainIpIgmpVersion | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.38.2.1.4 | ColumnrouterDomainIpDvmrp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.39 | NodeipStatus | |||
| 1.3.6.1.4.1.890.1.5.8.54.39.1 | TableipStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.39.1.1 | RowipStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.39.1.1.1 | ColumnipStatusIPAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.39.1.1.2 | ColumnipStatusVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.39.1.1.3 | ColumnipStatusPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.39.1.1.4 | ColumnipStatusType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41 | NodeospfExt | |||
| 1.3.6.1.4.1.890.1.5.8.54.41.1 | TableospfInterfaceTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.1.1 | RowospfInterfaceEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.1.1.1 | ColumnospfIfKeyId | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.1.1.2 | ColumnospfIfMaskbits | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.1.1.3 | ColumnospfIfDesignatedRouterID | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.1.1.4 | ColumnospfIfBackupDesignatedRouterID | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.1.1.5 | ColumnospfIfNbrCount | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.1.1.6 | ColumnospfIfAdjacentNbrCount | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.1.1.7 | ColumnospfIfHelloDueTime | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.2 | TableospfAreaExtTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.2.1 | RowospfAreaExtEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.2.1.1 | ColumnospfAreaExtName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.3 | TableospfRedistributeRouteTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.3.1 | RowospfRedistributeRouteEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.3.1.1 | ColumnospfRedistributeRouteProtocol | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.3.1.2 | ColumnospfRedistributeRouteState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.3.1.3 | ColumnospfRedistributeRouteType | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.3.1.4 | ColumnospfRedistributeRouteMetric | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.4 | TableospfNbrExtTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.4.1 | RowospfNbrExtEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.4.1.1 | ColumnospfNbrExtRole | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.4.1.2 | ColumnospfNbrExtDeadtime | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.4.1.3 | ColumnospfNbrExtInterface | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.4.1.4 | ColumnospfNbrExtRXmtL | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.4.1.5 | ColumnospfNbrExtRqstL | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.4.1.6 | ColumnospfNbrExtDBsmL | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.5 | TableospfLsdbExtTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.5.1 | RowospfLsdbExtEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.5.1.1 | ColumnospfLsdbExtLinkCount | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.5.1.2 | ColumnospfLsdbExtRouteAddress | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.5.1.3 | ColumnospfLsdbExtRouteMaskbits | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.6 | TableospfVirtualLinkTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.6.1 | RowospfVirtualLinkEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.6.1.1 | ColumnospfVirtualLinkName | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.6.1.2 | ColumnospfVirtualLinkKeyId | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.7 | TableospfSummaryAddrTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.7.1 | RowospfSummaryAddrEntry | not-accessible | mandatory | An entry in ospfSummaryAddrTable. |
| 1.3.6.1.4.1.890.1.5.8.54.41.7.1.1 | ColumnospfSummaryAddress | read-only | mandatory | ip address for ospf summary address entry |
| 1.3.6.1.4.1.890.1.5.8.54.41.7.1.2 | ColumnospfSummaryAddrMaskBit | read-only | mandatory | mask-bits for ospf summary address entry |
| 1.3.6.1.4.1.890.1.5.8.54.41.7.1.3 | ColumnospfSummaryAddrRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.41.8 | NodeospfGeneralExtGroup | |||
| 1.3.6.1.4.1.890.1.5.8.54.41.8.1 | ScalarospfDistance | read-write | mandatory | The administrative distance of OSPF routes |
| 1.3.6.1.4.1.890.1.5.8.54.42 | Nodemrstp | |||
| 1.3.6.1.4.1.890.1.5.8.54.42.1 | NodemrstpSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1 | TablemrstpBridgeTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1 | RowmrstpBridgeEntry | not-accessible | mandatory | An entry in mrstpBridgeTable. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.1 | ColumnmrstpBridgeIndex | read-only | mandatory | The tree index of the MRSTP. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.2 | ColumnmrstpState | read-write | mandatory | Enabled/disabled on the mrstp bridge. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.3 | ColumnmrstpProtocolSpecification | read-only | mandatory | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.4 | ColumnmrstpPriority | read-write | mandatory | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID ar… |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.5 | ColumnmrstpTimeSinceTopologyChange | read-only | mandatory | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.6 | ColumnmrstpTopChanges | read-only | mandatory | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.7 | ColumnmrstpDesignatedRoot | read-only | mandatory | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.8 | ColumnmrstpRootCost | read-only | mandatory | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.9 | ColumnmrstpRootPort | read-only | mandatory | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.10 | ColumnmrstpMaxAge | read-only | mandatory | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.11 | ColumnmrstpHelloTime | read-only | mandatory | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.12 | ColumnmrstpHoldTime | read-only | mandatory | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.13 | ColumnmrstpForwardDelay | read-only | mandatory | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.14 | ColumnmrstpBridgeMaxAge | read-write | mandatory | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related … |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.15 | ColumnmrstpBridgeHelloTime | read-write | mandatory | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second.… |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.1.1.16 | ColumnmrstpBridgeForwardDelay | read-write | mandatory | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is re… |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2 | TablemrstpPortTable | not-accessible | mandatory | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1 | RowmrstpPortEntry | not-accessible | mandatory | A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1.1 | ColumnmrstpPort | read-only | mandatory | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1.2 | ColumnmrstpPortPriority | read-write | mandatory | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1.3 | ColumnmrstpPortState | read-only | mandatory | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1.4 | ColumnmrstpPortEnable | read-write | mandatory | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1.5 | ColumnmrstpPortPathCost | read-write | mandatory | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1.6 | ColumnmrstpPortDesignatedRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1.7 | ColumnmrstpPortDesignatedCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1.8 | ColumnmrstpPortDesignatedBridge | read-only | mandatory | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1.9 | ColumnmrstpPortDesignatedPort | read-only | mandatory | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1.10 | ColumnmrstpPortForwardTransitions | read-only | mandatory | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1.11 | ColumnmrstpPortOnBridgeIndex | read-write | mandatory | Indetify the bridge index that this port joined to in MRSTP. |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1.12 | ColumnmrstpPortAdminEdgePort | read-write | mandatory | The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) ind… |
| 1.3.6.1.4.1.890.1.5.8.54.42.1.2.1.13 | ColumnmrstpPortOperEdgePort | read-only | mandatory | The operational value of the Edge Port parameter. The object is initialized to the value of the corresponding instance of dot1dStpPortAdminEdgePort. When the c… |
| 1.3.6.1.4.1.890.1.5.8.54.42.2 | NodemrstpNotifications | |||
| 1.3.6.1.4.1.890.1.5.8.54.100 | NodedhcpSnp | |||
| 1.3.6.1.4.1.890.1.5.8.54.100.1 | TabledhcpSnpVlanTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.1.1 | RowdhcpSnpVlanEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.1.1.1 | ColumndhcpSnpVlanEntryVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.1.1.2 | ColumndhcpSnpVlanEntryEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.1.1.3 | ColumndhcpSnpVlanEntryOption82Enable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.1.1.4 | ColumndhcpSnpVlanEntryInfo | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.2 | TabledhcpSnpPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.2.1 | RowdhcpSnpPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.2.1.1 | ColumndhcpSnpPortEntryPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.2.1.2 | ColumndhcpSnpPortEntryTrust | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.2.1.3 | ColumndhcpSnpPortEntryRate | read-write | mandatory | 0 means unlimited |
| 1.3.6.1.4.1.890.1.5.8.54.100.3 | TabledhcpSnpBindTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.3.1 | RowdhcpSnpBindEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.3.1.1 | ColumndhcpSnpBindEntryMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.3.1.2 | ColumndhcpSnpBindEntryVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.3.1.3 | ColumndhcpSnpBindEntryIP | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.3.1.4 | ColumndhcpSnpBindEntryLease | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.3.1.5 | ColumndhcpSnpBindEntryType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.3.1.6 | ColumndhcpSnpBindEntryPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.4 | ScalardhcpSnpEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5 | NodedhcpSnpDb | |||
| 1.3.6.1.4.1.890.1.5.8.54.100.5.1 | ScalardhcpSnpDbAbort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.2 | ScalardhcpSnpDbWriteDelay | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.3 | ScalardhcpSnpDbUrl | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.4 | ScalardhcpSnpDbUrlRenew | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5 | NodedhcpSnpDbStat | |||
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.1 | ScalardhcpSnpDbStatClear | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.2 | ScalardhcpSnpDbStatAgentRunning | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.3 | ScalardhcpSnpDbStatDelayExpiry | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.4 | ScalardhcpSnpDbStatAbortExpiry | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.5 | ScalardhcpSnpDbStatLastSuccTime | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.6 | ScalardhcpSnpDbStatLastFailTime | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.7 | ScalardhcpSnpDbStatLastFailReason | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.8 | ScalardhcpSnpDbStatTotalAttempt | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.9 | ScalardhcpSnpDbStatStartupFail | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.10 | ScalardhcpSnpDbStatSuccTrans | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.11 | ScalardhcpSnpDbStatFailTrans | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.12 | ScalardhcpSnpDbStatSuccRead | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.13 | ScalardhcpSnpDbStatFailRead | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.14 | ScalardhcpSnpDbStatSuccWrite | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.15 | ScalardhcpSnpDbStatFailWrite | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.16 | ScalardhcpSnpDbStatFirstSuccAccess | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.17 | ScalardhcpSnpDbStatLastIgnoreBindCol | read-only | mandatory | Last ignored: binding collision |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.18 | ScalardhcpSnpDbStatLastIgnoreExpireLease | read-only | mandatory | Last ignored: expired leases |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.19 | ScalardhcpSnpDbStatLastIgnoreInvalidIntf | read-only | mandatory | Last ignored: invalid interface |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.20 | ScalardhcpSnpDbStatLastIgnoreUnsuppVlan | read-only | mandatory | Last ignored: unsupported vlans |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.21 | ScalardhcpSnpDbStatLastIgnoreParse | read-only | mandatory | Last ignored: parsing error |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.22 | ScalardhcpSnpDbStatTotalIgnoreBindCol | read-only | mandatory | Total ignored: binding collision |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.23 | ScalardhcpSnpDbStatTotalIgnoreExpireLease | read-only | mandatory | Total ignored: expired leases |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.24 | ScalardhcpSnpDbStatTotalIgnoreInvalidIntf | read-only | mandatory | Total ignored: invalid interface |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.25 | ScalardhcpSnpDbStatTotalIgnoreUnsuppVlan | read-only | mandatory | Total ignored: unsupported vlans |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.26 | ScalardhcpSnpDbStatTotalIgnoreParse | read-only | mandatory | Total ignored: parsing error |
| 1.3.6.1.4.1.890.1.5.8.54.100.5.5.27 | ScalardhcpSnpDbStatFirstSuccessAccess | read-only | mandatory | First Success Access |
| 1.3.6.1.4.1.890.1.5.8.54.100.6 | NodedhcpSnpDhcpVlan | |||
| 1.3.6.1.4.1.890.1.5.8.54.100.6.1 | ScalardhcpSnpDhcpVlanVid | read-write | mandatory | 0: disable DHCP VLAN. |
| 1.3.6.1.4.1.890.1.5.8.54.101 | Nodeipsg | |||
| 1.3.6.1.4.1.890.1.5.8.54.101.1 | TableipsgTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.101.1.1 | RowipsgEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.101.1.1.1 | ColumnipsgEntryMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.101.1.1.2 | ColumnipsgEntryVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.101.1.1.3 | ColumnipsgEntryIp | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.101.1.1.4 | ColumnipsgEntryLease | read-only | mandatory | second |
| 1.3.6.1.4.1.890.1.5.8.54.101.1.1.5 | ColumnipsgEntryType | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.101.1.1.6 | ColumnipsgEntryPort | read-write | mandatory | 0 means any port |
| 1.3.6.1.4.1.890.1.5.8.54.101.1.1.7 | ColumnipsgEntryState | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102 | NodearpInspect | |||
| 1.3.6.1.4.1.890.1.5.8.54.102.1 | NodearpInspectSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.102.1.1 | ScalararpInspectState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.2 | ScalararpInspectFilterAgingTime | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.3 | NodearpInspectLog | |||
| 1.3.6.1.4.1.890.1.5.8.54.102.1.3.1 | ScalararpInspectLogEntries | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.3.2 | ScalararpInspectLogRate | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.3.3 | ScalararpInspectLogInterval | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.4 | TablearpInspectVlanTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.4.1 | RowarpInspectVlanEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.4.1.1 | ColumnarpInspectVlanVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.4.1.2 | ColumnarpInspectVlanLog | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.4.1.3 | ColumnarpInspectVlanStatus | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.5 | TablearpInspectPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.5.1 | RowarpInspectPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.5.1.1 | ColumnarpInspectPortIndex | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.5.1.2 | ColumnarpInspectPortTrust | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.5.1.3 | ColumnarpInspectPortRate | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.1.5.1.4 | ColumnarpInspectPortInterval | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2 | NodearpInspectStatus | |||
| 1.3.6.1.4.1.890.1.5.8.54.102.2.1 | ScalararpInspectFilterClear | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.2 | ScalararpInspectLogClear | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.3 | TablearpInspectFilterTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.3.1 | RowarpInspectFilterEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.3.1.1 | ColumnarpInspectFilterMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.3.1.2 | ColumnarpInspectFilterVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.3.1.3 | ColumnarpInspectFilterPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.3.1.4 | ColumnarpInspectFilterExpiry | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.3.1.5 | ColumnarpInspectFilterReason | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.3.1.6 | ColumnarpInspectFilterRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.4 | TablearpInspectLogTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.4.1 | RowarpInspectLogEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.4.1.1 | ColumnarpInspectLogMac | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.4.1.2 | ColumnarpInspectLogVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.4.1.3 | ColumnarpInspectLogPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.4.1.4 | ColumnarpInspectLogIp | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.4.1.5 | ColumnarpInspectLogNumPkt | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.4.1.6 | ColumnarpInspectLogReason | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.4.1.7 | ColumnarpInspectLogTime | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.5 | TablearpInspectStatisticsTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.5.1 | RowarpInspectStatisticsEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.5.1.1 | ColumnarpInspectStatisticsVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.5.1.2 | ColumnarpInspectStatisticsReceived | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.5.1.3 | ColumnarpInspectStatisticsRequest | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.5.1.4 | ColumnarpInspectStatisticsReply | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.5.1.5 | ColumnarpInspectStatisticsForward | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.5.1.6 | ColumnarpInspectStatisticsDrop | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.102.2.5.1.7 | ColumnarpInspectStatisticsClear | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.103 | NodetrTCMSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.103.1 | ScalartrTCMState | read-write | mandatory | Two-rate three color marker enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.54.103.2 | ScalartrTCMMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.103.3 | TabletrTCMPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.103.3.1 | RowtrTCMPortEntry | not-accessible | mandatory | An entry in trTCMPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.103.3.1.1 | ColumntrTCMPortState | read-create | mandatory | Two-rate three color marker enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.103.3.1.2 | ColumntrTCMPortCIR | read-write | mandatory | Allowed CIR in pkts/s. |
| 1.3.6.1.4.1.890.1.5.8.54.103.3.1.3 | ColumntrTCMPortPIR | read-write | mandatory | Allowed PIR in pkts/s. |
| 1.3.6.1.4.1.890.1.5.8.54.103.3.1.4 | ColumntrTCMPortDscpGreen | read-write | mandatory | 0-63 |
| 1.3.6.1.4.1.890.1.5.8.54.103.3.1.5 | ColumntrTCMPortDscpYellow | read-write | mandatory | 0-63 |
| 1.3.6.1.4.1.890.1.5.8.54.103.3.1.6 | ColumntrTCMPortDscpRed | read-write | mandatory | 0-63 |
| 1.3.6.1.4.1.890.1.5.8.54.104 | NodeloopGuardSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.104.1 | ScalarloopGuardState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.104.2 | TableloopGuardPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.104.2.1 | RowloopGuardPortEntry | not-accessible | mandatory | An entry in loopGuardPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.104.2.1.1 | ColumnloopGuardPortState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.105 | NodesubnetBasedVlanSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.105.1 | ScalarsubnetBasedVlanState | read-write | mandatory | subnet-based vlan feature enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.54.105.2 | ScalardhcpVlanOverrideState | read-write | mandatory | dhcp vlan override enabled/disabled when subnet-based vlan is enabled. |
| 1.3.6.1.4.1.890.1.5.8.54.105.3 | TablesubnetBasedVlanTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.105.3.1 | RowsubnetBasedVlanEntry | not-accessible | mandatory | An entry in subnetBasedVlanTable. |
| 1.3.6.1.4.1.890.1.5.8.54.105.3.1.1 | ColumnsubnetBasedVlanSrcIp | read-only | mandatory | source ip for subnet-based vlan entry |
| 1.3.6.1.4.1.890.1.5.8.54.105.3.1.2 | ColumnsubnetBasedVlanSrcMaskBit | read-only | mandatory | source ip mask-bits for subnet-based vlan entry |
| 1.3.6.1.4.1.890.1.5.8.54.105.3.1.3 | ColumnsubnetBasedVlanName | read-write | mandatory | name for subnet-based vlan entry |
| 1.3.6.1.4.1.890.1.5.8.54.105.3.1.4 | ColumnsubnetBasedVlanVid | read-write | mandatory | vid for subnet-based vlan entry |
| 1.3.6.1.4.1.890.1.5.8.54.105.3.1.5 | ColumnsubnetBasedVlanPriority | read-write | mandatory | priority for subnet-based vlan entry |
| 1.3.6.1.4.1.890.1.5.8.54.105.3.1.6 | ColumnsubnetBasedVlanEntryState | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.106 | NodemacAuthenticationSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.106.1 | ScalarmacAuthenticationState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.106.2 | ScalarmacAuthenticationNamePrefix | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.106.3 | ScalarmacAuthenticationPassword | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.106.4 | ScalarmacAuthenticationTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.106.5 | TablemacAuthenticationPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.106.5.1 | RowmacAuthenticationPortEntry | not-accessible | mandatory | An entry in macAuthenticationPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.106.5.1.1 | ColumnmacAuthenticationPortState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.107 | Nodemstp | |||
| 1.3.6.1.4.1.890.1.5.8.54.107.1 | NodemstpGen | |||
| 1.3.6.1.4.1.890.1.5.8.54.107.1.1 | ScalarmstpGenState | read-write | mandatory | Enabled/disabled on the mrstp bridge. |
| 1.3.6.1.4.1.890.1.5.8.54.107.1.2 | ScalarmstpGenCfgIdName | read-write | mandatory | The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier. |
| 1.3.6.1.4.1.890.1.5.8.54.107.1.3 | ScalarmstpGenCfgIdRevLevel | read-write | mandatory | This object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier. |
| 1.3.6.1.4.1.890.1.5.8.54.107.1.4 | ScalarmstpGenCfgIdCfgDigest | read-only | mandatory | Configuration Digest. |
| 1.3.6.1.4.1.890.1.5.8.54.107.1.5 | ScalarmstpGenHelloTime | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.107.1.6 | ScalarmstpGenMaxAge | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.107.1.7 | ScalarmstpGenForwardDelay | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.107.1.8 | ScalarmstpGenMaxHops | read-write | mandatory | 13.22.f) |
| 1.3.6.1.4.1.890.1.5.8.54.107.1.9 | ScalarmstpGenCistRootPathCost | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.1.10 | ScalarmstpGenCistRootBrid | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.20 | TablemstMapTable | not-accessible | mandatory | This table contains one entry for each instance of MSTP. |
| 1.3.6.1.4.1.890.1.5.8.54.107.20.1 | RowmstMapEntry | not-accessible | mandatory | A conceptual row containing the status of the MSTP instance. |
| 1.3.6.1.4.1.890.1.5.8.54.107.20.1.1 | ColumnmstMapIndex | not-accessible | mandatory | Uniquely identifies an instance. The entry of this table with index 0 presents always, represents CIST. When SET operation |
| 1.3.6.1.4.1.890.1.5.8.54.107.20.1.2 | ColumnmstMapVlans1k | read-write | mandatory | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.890.1.5.8.54.107.20.1.3 | ColumnmstMapVlans2k | read-write | mandatory | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 10… |
| 1.3.6.1.4.1.890.1.5.8.54.107.20.1.4 | ColumnmstMapVlans3k | read-write | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of… |
| 1.3.6.1.4.1.890.1.5.8.54.107.20.1.5 | ColumnmstMapVlans4k | read-write | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 30… |
| 1.3.6.1.4.1.890.1.5.8.54.107.20.1.6 | ColumnmstMapRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.107.30 | TablemstVlanTable | not-accessible | mandatory | This table contains one entry for each VlanId. |
| 1.3.6.1.4.1.890.1.5.8.54.107.30.1 | RowmstVlanEntry | not-accessible | mandatory | Information regarding the instance to which each Vlan is mapped. |
| 1.3.6.1.4.1.890.1.5.8.54.107.30.1.1 | ColumnmstVlanIndex | not-accessible | mandatory | The VlanId for which this entry contains the instance mapped. |
| 1.3.6.1.4.1.890.1.5.8.54.107.30.1.2 | ColumnmstVlanMstIndex | read-only | mandatory | An integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped |
| 1.3.6.1.4.1.890.1.5.8.54.107.40 | TablemstpPortTable | not-accessible | mandatory | A table that contains generic information about every port that is associated with this bridge. |
| 1.3.6.1.4.1.890.1.5.8.54.107.40.1 | RowmstpPortEntry | not-accessible | mandatory | A list of information for each port of the bridge. |
| 1.3.6.1.4.1.890.1.5.8.54.107.40.1.1 | ColumnmstpPortIndex | not-accessible | mandatory | A unique value, greater than zero, for each Port. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity… |
| 1.3.6.1.4.1.890.1.5.8.54.107.40.1.2 | ColumnmstpPortOperEdgePort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.107.40.1.3 | ColumnmstpPortOperPointToPointMAC | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.107.40.1.4 | ColumnmstpPortAdminEdgePort | read-write | mandatory | The administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port, and a value of false(2) ind… |
| 1.3.6.1.4.1.890.1.5.8.54.107.50 | TablemstpXstTable | not-accessible | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.50.1 | RowmstpXstEntry | not-accessible | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.50.1.1 | ColumnmstpXstId | read-only | mandatory | 0 means CIST. |
| 1.3.6.1.4.1.890.1.5.8.54.107.50.1.2 | ColumnmstpXstBridgePriority | read-write | mandatory | Bridge priority, in steps of 4096. |
| 1.3.6.1.4.1.890.1.5.8.54.107.50.1.3 | ColumnmstpXstBridgeId | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.50.1.4 | ColumnmstpXstInternalRootCost | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.50.1.5 | ColumnmstpXstRootPort | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.50.1.6 | ColumnmstpXstTimeSinceTopologyChange | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.50.1.7 | ColumnmstpXstTopologyChangesCount | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.60 | TablemstpXstPortTable | not-accessible | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.60.1 | RowmstpXstPortEntry | not-accessible | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.60.1.1 | ColumnmstpXstPortXstId | not-accessible | mandatory | 0 means CIST. |
| 1.3.6.1.4.1.890.1.5.8.54.107.60.1.2 | ColumnmstpXstPortIndex | read-only | mandatory | The value of mstpPortIndex of the Port in mstpPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.107.60.1.3 | ColumnmstpXstPortEnable | read-write | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.60.1.4 | ColumnmstpXstPortPriority | read-write | mandatory | Port priority, in steps of 16. |
| 1.3.6.1.4.1.890.1.5.8.54.107.60.1.5 | ColumnmstpXstPortPathCost | read-write | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.60.1.6 | ColumnmstpXstPortState | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.60.1.7 | ColumnmstpXstPortDesignatedRoot | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.60.1.8 | ColumnmstpXstPortDesignatedCost | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.60.1.9 | ColumnmstpXstPortDesignatedBridge | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.60.1.10 | ColumnmstpXstPortDesignatedPort | read-only | mandatory | . |
| 1.3.6.1.4.1.890.1.5.8.54.107.70 | NodemstpNotifications | |||
| 1.3.6.1.4.1.890.1.5.8.54.107.70.1 | NotificationnewRoot | current | ||
| 1.3.6.1.4.1.890.1.5.8.54.107.70.2 | NotificationtopologyChange | current | ||
| 1.3.6.1.4.1.890.1.5.8.54.108 | NoderadiusServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.108.1 | NoderadiusAuthServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.108.1.1 | ScalarradiusAuthServerMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.108.1.2 | ScalarradiusAuthServerTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.108.1.3 | TableradiusAuthServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.108.1.3.1 | RowradiusAuthServerEntry | not-accessible | mandatory | An entry in radiusAuthServerTable. |
| 1.3.6.1.4.1.890.1.5.8.54.108.1.3.1.1 | ColumnradiusAuthServerIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.108.1.3.1.2 | ColumnradiusAuthServerIpAddr | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.108.1.3.1.3 | ColumnradiusAuthServerUdpPort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.108.1.3.1.4 | ColumnradiusAuthServerSharedSecret | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.108.2 | NoderadiusAcctServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.108.2.1 | ScalarradiusAcctServerTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.108.2.2 | TableradiusAcctServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.108.2.2.1 | RowradiusAcctServerEntry | not-accessible | mandatory | An entry in radiusAcctServerTable. |
| 1.3.6.1.4.1.890.1.5.8.54.108.2.2.1.1 | ColumnradiusAcctServerIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.108.2.2.1.2 | ColumnradiusAcctServerIpAddr | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.108.2.2.1.3 | ColumnradiusAcctServerUdpPort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.108.2.2.1.4 | ColumnradiusAcctServerSharedSecret | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.109 | NodetacacsServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.109.1 | NodetacacsAuthServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.109.1.1 | ScalartacacsAuthServerMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.109.1.2 | ScalartacacsAuthServerTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.109.1.3 | TabletacacsAuthServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.109.1.3.1 | RowtacacsAuthServerEntry | not-accessible | mandatory | An entry in tacacsAuthServerTable. |
| 1.3.6.1.4.1.890.1.5.8.54.109.1.3.1.1 | ColumntacacsAuthServerIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.109.1.3.1.2 | ColumntacacsAuthServerIpAddr | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.109.1.3.1.3 | ColumntacacsAuthServerTcpPort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.109.1.3.1.4 | ColumntacacsAuthServerSharedSecret | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.109.2 | NodetacacsAcctServerSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.109.2.1 | ScalartacacsAcctServerTimeout | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.109.2.2 | TabletacacsAcctServerTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.109.2.2.1 | RowtacacsAcctServerEntry | not-accessible | mandatory | An entry in tacacsAcctServerTable. |
| 1.3.6.1.4.1.890.1.5.8.54.109.2.2.1.1 | ColumntacacsAcctServerIndex | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.109.2.2.1.2 | ColumntacacsAcctServerIpAddr | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.109.2.2.1.3 | ColumntacacsAcctServerTcpPort | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.109.2.2.1.4 | ColumntacacsAcctServerSharedSecret | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110 | NodeaaaSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.110.1 | NodeauthenticationSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.110.1.1 | TableauthenticationTypeTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.1.1.1 | RowauthenticationTypeEntry | not-accessible | mandatory | An entry in authenticationTypeTable. |
| 1.3.6.1.4.1.890.1.5.8.54.110.1.1.1.1 | ColumnauthenticationTypeName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.1.1.1.2 | ColumnauthenticationTypeMethodList | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.2 | NodeaccountingSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.110.2.1 | ScalaraccountingUpdatePeriod | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.2.2 | TableaccountingTypeTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.2.2.1 | RowaccountingTypeEntry | not-accessible | mandatory | An entry in accountingTypeTable. |
| 1.3.6.1.4.1.890.1.5.8.54.110.2.2.1.1 | ColumnaccountingTypeName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.2.2.1.2 | ColumnaccountingTypeActive | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.2.2.1.3 | ColumnaccountingTypeBroadcast | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.2.2.1.4 | ColumnaccountingTypeMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.2.2.1.5 | ColumnaccountingTypeMethod | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.2.2.1.6 | ColumnaccountingTypePrivilege | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.3 | NodeauthorizationSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.110.3.1 | TableauthorizationTypeTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.3.1.1 | RowauthorizationTypeEntry | not-accessible | mandatory | An entry in authorizationTypeTable. |
| 1.3.6.1.4.1.890.1.5.8.54.110.3.1.1.1 | ColumnauthorizationTypeName | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.3.1.1.2 | ColumnauthorizationTypeActive | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.110.3.1.1.3 | ColumnauthorizationTypeMethod | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.112 | NodeportIsolationSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.112.1 | TableportIsolationTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.112.1.1 | RowportIsolationEntry | not-accessible | mandatory | An entry in portIsolationTable. |
| 1.3.6.1.4.1.890.1.5.8.54.112.1.1.1 | ColumnportIsolationState | read-write | mandatory | Port isolation enabled/disabled on the port. Enable(1) to be isolated and not exchange packets. |
| 1.3.6.1.4.1.890.1.5.8.54.115 | Nodel2ptSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.115.1 | Scalarl2ptState | read-write | mandatory | L2PT feature enabled/disabled for the switch |
| 1.3.6.1.4.1.890.1.5.8.54.115.2 | Scalarl2ptMacAddr | read-write | mandatory | L2PT destination mac address |
| 1.3.6.1.4.1.890.1.5.8.54.115.3 | Tablel2ptTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.115.3.1 | Rowl2ptEntry | not-accessible | mandatory | An entry in l2ptTable. |
| 1.3.6.1.4.1.890.1.5.8.54.115.3.1.1 | Columnl2ptProtocolGroup | read-write | mandatory | L2PT protocols enabled/disabled on the port |
| 1.3.6.1.4.1.890.1.5.8.54.115.3.1.2 | Columnl2ptPointToPointProtocolGroup | read-write | mandatory | L2PT point-to-point protocols enabled/disabled on the port |
| 1.3.6.1.4.1.890.1.5.8.54.115.3.1.3 | Columnl2ptMode | read-write | mandatory | L2PT port role on the port |
| 1.3.6.1.4.1.890.1.5.8.54.116 | NodevlanMappingSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.116.1 | ScalarvlanMappingState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.116.2 | TablevlanMappingPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.116.2.1 | RowvlanMappingPortEntry | not-accessible | mandatory | An entry in vlanMappingPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.116.2.1.1 | ColumnvlanMappingPortState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.116.3 | TablevlanMappingRuleTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.116.3.1 | RowvlanMappingRuleEntry | not-accessible | mandatory | An entry in vlan-mapping rule table |
| 1.3.6.1.4.1.890.1.5.8.54.116.3.1.1 | ColumnvlanMappingRuleName | read-write | mandatory | The name of vlan-mapping entry |
| 1.3.6.1.4.1.890.1.5.8.54.116.3.1.2 | ColumnvlanMappingRulePort | read-only | mandatory | interface port id |
| 1.3.6.1.4.1.890.1.5.8.54.116.3.1.3 | ColumnvlanMappingRuleVid | read-only | mandatory | inner vid |
| 1.3.6.1.4.1.890.1.5.8.54.116.3.1.4 | ColumnvlanMappingRuleTransVid | read-write | mandatory | translated vid |
| 1.3.6.1.4.1.890.1.5.8.54.116.3.1.5 | ColumnvlanMappingRulePriority | read-write | mandatory | priority |
| 1.3.6.1.4.1.890.1.5.8.54.116.3.1.6 | ColumnvlanMappingRuleRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.117 | NodetransceiverInfo | |||
| 1.3.6.1.4.1.890.1.5.8.54.117.1 | TabletransceiverSerialInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.54.117.1.1 | RowtransceiverSerialInfoEntry | not-accessible | current | An entry in transceiverSerialInfoTable. |
| 1.3.6.1.4.1.890.1.5.8.54.117.1.1.1 | ColumntransceiverSerialInfoEntryPort | read-only | current | Index of transceiverSerialInfo. It is referred to dot1dBasePort |
| 1.3.6.1.4.1.890.1.5.8.54.117.1.1.2 | ColumntransceiverSerialInfoEntryStatus | read-only | current | Transceiver module status. |
| 1.3.6.1.4.1.890.1.5.8.54.117.1.1.3 | ColumntransceiverSerialInfoEntryVendor | read-only | current | Transceiver module vendor name. |
| 1.3.6.1.4.1.890.1.5.8.54.117.1.1.4 | ColumntransceiverSerialInfoEntryPartNo | read-only | current | Part number provided by transceiver module vendor. |
| 1.3.6.1.4.1.890.1.5.8.54.117.1.1.5 | ColumntransceiverSerialInfoEntrySerialNo | read-only | current | Serial number provided by transceiver module vendor. |
| 1.3.6.1.4.1.890.1.5.8.54.117.1.1.6 | ColumntransceiverSerialInfoEntryRevision | read-only | current | Revision level for part number provided by transceiver module vendor. |
| 1.3.6.1.4.1.890.1.5.8.54.117.1.1.7 | ColumntransceiverSerialInfoEntryDateCode | read-only | current | Transceiver module vendor's manufacturing date code |
| 1.3.6.1.4.1.890.1.5.8.54.117.1.1.8 | ColumntransceiverSerialInfoEntryTransceiver | read-only | current | Transceiver module type names |
| 1.3.6.1.4.1.890.1.5.8.54.117.2 | TabletransceiverDdmInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.54.117.2.1 | RowtransceiverDdmInfoEntry | not-accessible | current | An entry in transceiverDdmInfoTable. |
| 1.3.6.1.4.1.890.1.5.8.54.117.2.1.1 | ColumntransceiverDdmInfoEntryPort | read-only | current | Index of transceiverDdmInfo. This will be referred to dot1dBasePort |
| 1.3.6.1.4.1.890.1.5.8.54.117.2.1.2 | ColumntransceiverDdmInfoEntryType | read-only | current | Transceiver DDM information type. 1: Temperature 2: Voltage 3: TX Bias 4: TX power 5: RX power |
| 1.3.6.1.4.1.890.1.5.8.54.117.2.1.3 | ColumntransceiverDdmInfoEntryAlarmMax | read-only | current | Transceiver high alarm threshold. The unit for temperature is 0.01C The unit for voltage is 0.01V The unit for TX bias is 0.01mA The unit for TX/RX power is 0.… |
| 1.3.6.1.4.1.890.1.5.8.54.117.2.1.4 | ColumntransceiverDdmInfoEntryAlarmMin | read-only | current | Transceiver low alarm threshold. The unit for temperature is 0.01C The unit for voltage is 0.01V The unit for TX bias is 0.01mA The unit for TX/RX power is 0.0… |
| 1.3.6.1.4.1.890.1.5.8.54.117.2.1.5 | ColumntransceiverDdmInfoEntryWarnMax | read-only | current | Transceiver high warn threshold. The unit for temperature is 0.01C The unit for voltage is 0.01V The unit for TX bias is 0.01mA The unit for TX/RX power is 0.0… |
| 1.3.6.1.4.1.890.1.5.8.54.117.2.1.6 | ColumntransceiverDdmInfoEntryWarnMin | read-only | current | Transceiver low warn threshold. The unit for temperature is 0.01C The unit for voltage is 0.01V The unit for TX bias is 0.01mA The unit for TX/RX power is 0.01… |
| 1.3.6.1.4.1.890.1.5.8.54.117.2.1.7 | ColumntransceiverDdmInfoEntryCurrent | read-only | current | Transceiver current DDM value. The unit for temperature is 0.01C The unit for voltage is 0.01V The unit for TX bias is 0.01mA The unit for TX/RX power is 0.01d… |
| 1.3.6.1.4.1.890.1.5.8.54.117.2.1.8 | ColumntransceiverDdmInfoEntryDescription | read-only | current | Transceiver DDM information description. Show N/A if transceiver DDM information is not available. |
| 1.3.6.1.4.1.890.1.5.8.54.118 | Nodedot3OamSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.118.1 | Scalardot3OamState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.118.2 | Tabledot3OamPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.118.2.1 | Rowdot3OamPortEntry | not-accessible | mandatory | An entry in dot3OamPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.118.2.1.1 | Columndot3OamFunctionsSupported | read-write | mandatory | The OAM functions supported on this Ethernet-like interface. OAM consists of separate functional sets beyond the basic discovery process that is always require… |
| 1.3.6.1.4.1.890.1.5.8.54.119 | Nodedot1agCfmSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.119.1 | Nodedot1agCfmMIBObjects | |||
| 1.3.6.1.4.1.890.1.5.8.54.119.1.7 | Nodedot1agCfmMep | |||
| 1.3.6.1.4.1.890.1.5.8.54.119.1.7.1 | Tablezyswdot1agCfmMepTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.119.1.7.1.1 | Rowzyswdot1agCfmMepEntry | not-accessible | mandatory | The dot1agCfmMep table entry |
| 1.3.6.1.4.1.890.1.5.8.54.119.1.7.1.1.1 | Columnzyswdot1agCfmMepTransmitLbmDataTlvSize | read-write | mandatory | Size of data to be included in the LBM Data TLV |
| 1.3.6.1.4.1.890.1.5.8.54.122 | NodevlanCounterSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.122.1 | TablevlanCounterTable | not-accessible | current | Defines the Vlan Counter Table for providing, via SNMP, the capability of performing vlan counting operations at a remote host and having their results of thes… |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1 | RowvlanCounterEntry | not-accessible | current | Defines an entry in the VlanCounterTable. |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.1 | ColumnvlanCounterVlanID | read-only | current | VlanID where the vlan counter applies. |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.2 | ColumnvlanCounterHCOctets | read-only | current | Average receive Octets |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.3 | ColumnvlanCounterHCPkts | read-only | current | Total received packet number |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.4 | ColumnvlanCounterHCMulticastPkts | read-only | current | Total received multicast-packet number |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.5 | ColumnvlanCounterHCBroadcastPkts | read-only | current | Total received Broadcast-packet number |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.6 | ColumnvlanCounterHCTaggedPkts | read-only | current | Total received tagged-packet number |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.7 | ColumnvlanCounterHCPkts64Octets | read-only | current | Total received packet number in size of 0 to 64 Octets |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.8 | ColumnvlanCounterHCPkts65to127Octets | read-only | current | Total received packet number in size of 65 to127 Octets |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.9 | ColumnvlanCounterHCPkts128to255Octets | read-only | current | Total received packet number in size of 128 to 255Octets |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.10 | ColumnvlanCounterHCPkts256to511Octets | read-only | current | Total received packet number in size of 256 to 511 Octets |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.11 | ColumnvlanCounterHCPkts512to1023Octets | read-only | current | Total received packet number in size of 512 to 1023 Octets |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.12 | ColumnvlanCounterHCPkts1024to1518Octets | read-only | current | Total received packet number in size of 1024 to 1518 Octets |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.13 | ColumnvlanCounterHCOversizePkts | read-only | current | Total received packet number in size larger than 1519 Octets |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.14 | ColumnvlanCounterTimeout | read-write | current | Specifies the time-out value, in seconds, for a vlan counter operation. |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.15 | ColumnvlanCounterRowStatus | read-write | current | Specifies the time-out value, in seconds, for a vlan counter operation. |
| 1.3.6.1.4.1.890.1.5.8.54.122.1.1.16 | ColumnvlanCounterPort | read-write | current | Port where the vlan counter applies. (Only support one or all bit setting now) |
| 1.3.6.1.4.1.890.1.5.8.54.124 | NodesysMemoryPool | |||
| 1.3.6.1.4.1.890.1.5.8.54.124.1 | TablesysMemoryPoolTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.54.124.1.1 | RowsysMemoryPoolEntry | not-accessible | current | A system memory pool entry |
| 1.3.6.1.4.1.890.1.5.8.54.124.1.1.1 | ColumnsysMemoryPoolId | read-only | current | The memory pool id |
| 1.3.6.1.4.1.890.1.5.8.54.124.1.1.2 | ColumnsysMemoryPoolName | read-only | current | Name of the memory pool |
| 1.3.6.1.4.1.890.1.5.8.54.124.1.1.3 | ColumnsysMemoryPoolTotal | read-only | current | Total size of memory pool in bytes |
| 1.3.6.1.4.1.890.1.5.8.54.124.1.1.4 | ColumnsysMemoryPoolUsed | read-only | current | Used size of memory pool in bytes |
| 1.3.6.1.4.1.890.1.5.8.54.124.1.1.5 | ColumnsysMemoryPoolUtil | read-only | current | Utilization of memory pool in bytes |
| 1.3.6.1.4.1.890.1.5.8.54.125 | Nodepppoe | |||
| 1.3.6.1.4.1.890.1.5.8.54.125.1 | NodepppoeIaSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.125.1.1 | ScalarpppoeIaState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.2 | ScalarpppoeIaAccessNodeIdentifierString | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.3 | ScalarpppoeIaFlexibleCircuitIDSyntaxActive | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.4 | ScalarpppoeIaFlexibleCircuitIDSyntaxIdentifierString | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.5 | ScalarpppoeIaFlexibleCircuitIDSyntaxOption | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.6 | ScalarpppoeIaFlexibleCircuitIDSyntaxDelimiter | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.7 | TablepppoeIaPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.7.1 | RowpppoeIaPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.7.1.1 | ColumnpppoeIaPortEntryPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.7.1.2 | ColumnpppoeIaPortEntryTrust | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.7.1.3 | ColumnpppoeIaPortEntryCircuitIDString | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.7.1.4 | ColumnpppoeIaPortEntryRemoteIDString | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.8 | TablepppoeIaVlanTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.8.1 | RowpppoeIaVlanEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.8.1.1 | ColumnpppoeIaVlanEntryVid | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.8.1.2 | ColumnpppoeIaVlanEntryCircuitID | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.8.1.3 | ColumnpppoeIaVlanEntryRemoteID | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.8.1.4 | ColumnpppoeIaVlanEntryRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.9 | TablepppoeIaPortVlanTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.9.1 | RowpppoeIaPortVlanEntry | not-accessible | mandatory | An entry in pppoe ia port & vlan table |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.9.1.1 | ColumnpppoeIaPortVlanEntryPort | read-only | mandatory | interface port id |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.9.1.2 | ColumnpppoeIaPortVlanEntryVid | read-only | mandatory | vid |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.9.1.3 | ColumnpppoeIaPortVlanEntryCircuitIDString | read-write | mandatory | The circuit-id string of pppoe ia port & vlan entry |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.9.1.4 | ColumnpppoeIaPortVlanEntryRemoteIDString | read-write | mandatory | The remote-id string of pppoe ia port & vlan entry |
| 1.3.6.1.4.1.890.1.5.8.54.125.1.9.1.5 | ColumnpppoeIaPortVlanEntryRowStatus | read-create | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.126 | NodearpLearningSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.126.1 | TablearpLearningPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.126.1.1 | RowarpLearningPortEntry | not-accessible | mandatory | An entry in arpLearningPortTable. Modes: arp-reply(0), gratuitous-arp(1), arp-request(2) |
| 1.3.6.1.4.1.890.1.5.8.54.126.1.1.1 | ColumnarpLearningPortMode | read-write | mandatory | ArpLearning Mode on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.127 | NodestaticRouteSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.127.1 | ScalarmaxNumberOfStaticRoutes | read-only | mandatory | The maximum number of static route entries that can be created |
| 1.3.6.1.4.1.890.1.5.8.54.127.2 | TablestaticRouteTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.127.2.1 | RowstaticRouteEntry | not-accessible | mandatory | The static route table entry. |
| 1.3.6.1.4.1.890.1.5.8.54.127.2.1.1 | ColumnstaticRouteName | read-write | mandatory | The name of the static route entry |
| 1.3.6.1.4.1.890.1.5.8.54.127.2.1.2 | ColumnstaticRouteIp | not-accessible | mandatory | The destination ip address of the static route entry |
| 1.3.6.1.4.1.890.1.5.8.54.127.2.1.3 | ColumnstaticRouteMask | not-accessible | mandatory | The mask of the static route entry |
| 1.3.6.1.4.1.890.1.5.8.54.127.2.1.4 | ColumnstaticRouteGateway | not-accessible | mandatory | The gateway of the static route entry |
| 1.3.6.1.4.1.890.1.5.8.54.127.2.1.5 | ColumnstaticRouteMetric | read-write | mandatory | The metric of the static route entry |
| 1.3.6.1.4.1.890.1.5.8.54.127.2.1.6 | ColumnstaticRouteRowStatus | read-create | mandatory | The status of the static route entry. |
| 1.3.6.1.4.1.890.1.5.8.54.128 | NoderoutingStatus | |||
| 1.3.6.1.4.1.890.1.5.8.54.128.1 | TableroutingStatusTable | not-accessible | mandatory | The routing table |
| 1.3.6.1.4.1.890.1.5.8.54.128.1.1 | RowroutingStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.128.1.1.1 | ColumnroutingStatusDestAddress | read-only | mandatory | The destination ip address of the route entry |
| 1.3.6.1.4.1.890.1.5.8.54.128.1.1.2 | ColumnroutingStatusDestMaskbits | read-only | mandatory | The mask of the route entry |
| 1.3.6.1.4.1.890.1.5.8.54.128.1.1.3 | ColumnroutingStatusGateway | read-only | mandatory | The gateway of the route entry |
| 1.3.6.1.4.1.890.1.5.8.54.128.1.1.4 | ColumnroutingStatusInterface | read-only | mandatory | The interface of the route entry |
| 1.3.6.1.4.1.890.1.5.8.54.128.1.1.5 | ColumnroutingStatusMetric | read-only | mandatory | The metric of the route entry |
| 1.3.6.1.4.1.890.1.5.8.54.128.1.1.6 | ColumnroutingStatusType | read-only | mandatory | The type of the route entry. |
| 1.3.6.1.4.1.890.1.5.8.54.130 | Nodeerrdisable | |||
| 1.3.6.1.4.1.890.1.5.8.54.130.1 | Noderecovery | |||
| 1.3.6.1.4.1.890.1.5.8.54.130.1.1 | NodeerrdisableRecoverySetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.130.1.1.1 | ScalarerrdisableRecoveryState | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.1.1.2 | TableerrdisableRecoveryReasonTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.1.1.2.1 | RowerrdisableRecoveryReasonEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.1.1.2.1.1 | ColumnerrdisableRecoveryReason | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.1.1.2.1.2 | ColumnerrdisableRecoveryReasonActive | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.1.1.2.1.3 | ColumnerrdisableRecoveryReasonInterval | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.1.1.3 | TableerrdisableRecoveryIfStatusTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.1.1.3.1 | RowerrdisableRecoveryIfStatusEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.1.1.3.1.1 | ColumnerrdisableRecoveryIfStatusReason | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.1.1.3.1.2 | ColumnerrdisableRecoveryIfStatusPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.1.1.3.1.3 | ColumnerrdisableRecoveryIfStatusTimeToRecover | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.2 | Nodedetect | |||
| 1.3.6.1.4.1.890.1.5.8.54.130.2.1 | TableerrdisableDetectReasonTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.2.1.1 | RowerrdisableDetectReasonEntry | not-accessible | mandatory | An entry in errdisableDetectReasonTable. |
| 1.3.6.1.4.1.890.1.5.8.54.130.2.1.1.1 | ColumnerrdisableDetectReason | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.2.1.1.2 | ColumnerrdisableDetectReasonEnable | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.2.1.1.3 | ColumnerrdisableDetectReasonMode | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.3 | NodeerrdisableTrapInfoObject | |||
| 1.3.6.1.4.1.890.1.5.8.54.130.3.1 | ScalarerrdisableTrapPort | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.3.2 | ScalarerrdisableTrapReason | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.3.3 | ScalarerrdisableTrapMode | read-only | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.130.4 | NodeerrdisableTrapNotifications | |||
| 1.3.6.1.4.1.890.1.5.8.54.130.4.1 | NotificationerrdisableDetectTrap | current | ||
| 1.3.6.1.4.1.890.1.5.8.54.130.4.2 | NotificationerrdisableRecoveryTrap | current | ||
| 1.3.6.1.4.1.890.1.5.8.54.131 | NodecpuProtectionSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.131.1 | TablecpuProtectionTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.131.1.1 | RowcpuProtectionEntry | not-accessible | mandatory | An entry in CPUProtectionTable. |
| 1.3.6.1.4.1.890.1.5.8.54.131.1.1.1 | ColumncpuProtectionPort | read-only | mandatory | The Protected Port |
| 1.3.6.1.4.1.890.1.5.8.54.131.1.1.2 | ColumncpuProtectionReason | read-only | mandatory | The Protected Reason |
| 1.3.6.1.4.1.890.1.5.8.54.131.1.1.3 | ColumncpuProtectionRateLimitSet | read-write | mandatory | The rate limit of a reason on a port |
| 1.3.6.1.4.1.890.1.5.8.54.132 | NodepolicyRouteSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.132.1 | TablepolicyRouteProfileTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.132.1.1 | RowpolicyRouteProfileEntry | not-accessible | mandatory | An profile entry in policyRouteTable. |
| 1.3.6.1.4.1.890.1.5.8.54.132.1.1.1 | ColumnpolicyRouteProfileEnable | read-write | mandatory | Profile enabled/disabled status. |
| 1.3.6.1.4.1.890.1.5.8.54.132.1.1.2 | ColumnpolicyRouteProfileName | read-only | mandatory | Profile name of policy route profile. |
| 1.3.6.1.4.1.890.1.5.8.54.132.1.1.3 | ColumnpolicyRouteProfileRowStatus | read-create | mandatory | Row Status for policy route profile. |
| 1.3.6.1.4.1.890.1.5.8.54.132.2 | TablepolicyRouteRuleTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.132.2.1 | RowpolicyRouteRuleEntry | not-accessible | mandatory | An rule entry in policyRouteTable. |
| 1.3.6.1.4.1.890.1.5.8.54.132.2.1.1 | ColumnpolicyRouteRuleProfileName | read-only | mandatory | Profile name of policy route rule. |
| 1.3.6.1.4.1.890.1.5.8.54.132.2.1.2 | ColumnpolicyRouteRuleSequence | read-only | mandatory | Sequence number of policy route rule. |
| 1.3.6.1.4.1.890.1.5.8.54.132.2.1.3 | ColumnpolicyRouteRuleStatement | read-write | mandatory | Statement of policy route rule. |
| 1.3.6.1.4.1.890.1.5.8.54.132.2.1.4 | ColumnpolicyRouteRuleCalssifier | read-write | mandatory | Classifier of policy route rule. |
| 1.3.6.1.4.1.890.1.5.8.54.132.2.1.5 | ColumnpolicyRouteRuleSetNextHop | read-write | mandatory | Next hop IP address if the incoming packets match the criteria. 0.0.0.0 means do nothing. |
| 1.3.6.1.4.1.890.1.5.8.54.132.2.1.6 | ColumnpolicyRouteRuleRowStatus | read-create | mandatory | Row Status for policy route rule. |
| 1.3.6.1.4.1.890.1.5.8.54.133 | NodeprivateVLANSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.133.1 | TableprivateVLANTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.133.1.1 | RowprivateVLANEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.133.1.1.1 | ColumnprivateVLANName | read-write | mandatory | Private VLAN name. |
| 1.3.6.1.4.1.890.1.5.8.54.133.1.1.2 | ColumnprivateVLANVid | read-only | mandatory | Private VLAN ID. |
| 1.3.6.1.4.1.890.1.5.8.54.133.1.1.3 | ColumnprivateVLANPromiscuousPorts | read-write | mandatory | Private VLAN promiscuous ports. |
| 1.3.6.1.4.1.890.1.5.8.54.133.1.1.4 | ColumnprivateVLANRowStatus | read-write | mandatory | |
| 1.3.6.1.4.1.890.1.5.8.54.134 | NodesFlowSetup | |||
| 1.3.6.1.4.1.890.1.5.8.54.134.1 | ScalarsFlowState | read-write | mandatory | Sflow enabled/disabled for the switch. |
| 1.3.6.1.4.1.890.1.5.8.54.134.2 | TablesFlowCollectorTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.54.134.2.1 | RowsFlowCollectorEntry | not-accessible | current | An entry in sflowCollectorTable. |
| 1.3.6.1.4.1.890.1.5.8.54.134.2.1.1 | ColumnsFlowCollectorAddressType | read-only | current | The Type of IP address for sflow collector entry. |
| 1.3.6.1.4.1.890.1.5.8.54.134.2.1.2 | ColumnsFlowCollectorAddress | read-only | current | The IP address for sflow collector entry. |
| 1.3.6.1.4.1.890.1.5.8.54.134.2.1.3 | ColumnsFlowCollectorUdpPort | read-write | current | The UDP port for sflow collector entry. The range of UDP port is between 1 and 65535. |
| 1.3.6.1.4.1.890.1.5.8.54.134.2.1.4 | ColumnsFlowCollectorRowStatus | read-write | current | |
| 1.3.6.1.4.1.890.1.5.8.54.134.3 | TablesFlowPortTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.54.134.3.1 | RowsFlowPortEntry | not-accessible | current | An entry in sflowPortTable. |
| 1.3.6.1.4.1.890.1.5.8.54.134.3.1.1 | ColumnsFlowPortState | read-write | mandatory | Sflow enabled/disabled on the port. |
| 1.3.6.1.4.1.890.1.5.8.54.134.4 | TablesFlowPortCollectorTable | not-accessible | current | |
| 1.3.6.1.4.1.890.1.5.8.54.134.4.1 | RowsFlowPortCollectorEntry | not-accessible | current | An entry in sflowCollectorTable. |
| 1.3.6.1.4.1.890.1.5.8.54.134.4.1.1 | ColumnsFlowPortCollectorAddressType | read-only | current | The Type of IP address for sflow port collector entry. |
| 1.3.6.1.4.1.890.1.5.8.54.134.4.1.2 | ColumnsFlowPortCollectorAddress | read-only | current | The IP address for sflow port collector entry. |
| 1.3.6.1.4.1.890.1.5.8.54.134.4.1.3 | ColumnsFlowPortCollectorSampleRate | read-write | current | The sample rate. The range of samle rate is beteen 256 and 65535. |
| 1.3.6.1.4.1.890.1.5.8.54.134.4.1.4 | ColumnsFlowPortCollectorPollInterval | read-write | current | The poll interval. The range of poll interval is between 20 and 120. |
| 1.3.6.1.4.1.890.1.5.8.54.134.4.1.5 | ColumnsFlowPortCollectorRowStatus | read-write | current |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| EventIdNumber | Integer32 | current | This textual convention describes the index that uniquely identifies a fault event type in the entire system. Every fault event type, e.g. link down, has a unique EventIdNumber. |
| EventPersistence | INTEGER{ normal (1), delta (2) } | current | This textual convention indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). |
| EventServiceAffective | INTEGER{ noServiceAffected (1), serviceAffected (2) } | current | This textual convention indicates whether an event is immediately service affecting or not. |
| EventSeverity | INTEGER{ critical (1), major (2), minor (3), informational (4) } | current | This textual convention describes the severity of a fault event. The decreasing order of severity is shown in the textual convention. |
| InstanceType | INTEGER { unknown (1), node (2), shelf (3), line (4), switch (5), lsp (6), l2Interface(7), l3Interface(8), rowIndex(9) } | current | This textual convention describes the type of an instanceId associated with each event and by that means specifies how the instanceId variable should be intepreted. Various instanceId types are specified below to enable… |
| MstiOrCistInstanceIndex | Integer32 (0..16) | current | This textual convention is an extension of the MstiInstanceIndex convention. This extension permits the additional value of zero, which means Common and Internal Spanning Tree (CIST). |
| UtcTimeStamp | Unsigned32 | current | Universal Time Coordinated as a 32-bit value that designates the number of seconds since Jan 1, 1970 12:00AM. |