MIB Viewer

ACE202-MIB

1373 objects
No module-level DESCRIPTION found.
Imported Objects
ATM-MIBaal5VccEntry atmVclEntry atmVclVci atmVclVpi atmVplVpi
DS1-MIBdsx1CurrentIndex dsx1IntervalIndex dsx1IntervalNumber dsx1LineIndex dsx1LineStatus dsx1LineStatusLastChange dsx1LoopbackStatus dsx1TotalIndex
FR-ATM-PVC-SERVICE-IWF-MIB MISSINGfrAtmIwfConnectionEntry
IF-MIBifAlias ifIndex InterfaceIndex
IMA-MIBimaGroupFailureStatus imaGroupIndex imaLinkIfIndex
ISDN-MIBisdnSignalingEntry
PerfHist-TC-MIBPerfCurrentCount PerfIntervalCount PerfTotalCount
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-SMICounter32 enterprises Gauge32 Integer32 IpAddress NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks
SNMPv2-TCDateAndTime DisplayString RowStatus TimeStamp
OIDNameAccessStatusDescription
1.3.6.1.4.1.164Noderad
1.3.6.1.4.1.164.1NoderadTokenRing
1.3.6.1.4.1.164.2NoderadFddi
1.3.6.1.4.1.164.3NoderadWan
1.3.6.1.4.1.164.3.1NodewanGen
1.3.6.1.4.1.164.3.1.6NodediverseIfWanGen
1.3.6.1.4.1.164.3.1.6.2NodesonetInterface
1.3.6.1.4.1.164.3.1.6.2.1NodeprtSonetPerfHistory
1.3.6.1.4.1.164.3.1.6.2.1.1TableprtSonetMediumTablenot-accessiblecurrentThe SONET Medium table.
1.3.6.1.4.1.164.3.1.6.2.1.1.1RowprtSonetMediumEntrynot-accessiblecurrentAn entry in the SONET Medium table. ifIndex of the lowest SONET layer of type sonet(39).
1.3.6.1.4.1.164.3.1.6.2.1.1.1.1ColumnprtSonetMediumTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the near end current error- measurement period.
1.3.6.1.4.1.164.3.1.6.2.1.1.1.2ColumnprtSonetMediumValidIntervalsread-onlycurrentThe number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 h…
1.3.6.1.4.1.164.3.1.6.2.1.2TableprtSonetSectionLineCurrentTablenot-accessiblecurrentThe SONET Section/Line Current table.
1.3.6.1.4.1.164.3.1.6.2.1.2.1RowprtSectionLineCurrentEntrynot-accessiblecurrentAn entry in the SONET Section/Line Current table. ifIndex of the section/line SONET layer of type sonet(39).
1.3.6.1.4.1.164.3.1.6.2.1.2.1.1ColumnprtSonetCurrentLOSread-onlycurrentThe counter associated with the number of LOS seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.2ColumnprtSonetCurrentLOFread-onlycurrentThe counter associated with the number of LOF seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.3ColumnprtSonetCurrentLineAISread-onlycurrentThe counter associated with the number of Line AIS seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.4ColumnprtSonetCurrentLineFERFread-onlycurrentThe counter associated with the number of Line FERF seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.5ColumnprtSonetCurrentSectionBIPread-onlycurrentThe counter associated with the number of Section BIP errors, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.6ColumnprtSonetCurrentLineBIPread-onlycurrentThe counter associated with the number of Line BIP errors, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.7ColumnprtSonetCurrentLineFEBEread-onlycurrentThe counter associated with the number of Line FEBE errors, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.8ColumnprtSonetCurrentUASread-onlycurrentThe counter associated with the number of UAS encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.9ColumnprtSonetCurrentSESread-onlycurrentThe counter associated with the number of SES encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.10ColumnprtSonetCurrentESread-onlycurrentThe number of Errored Seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.11ColumnprtSonetCurrentStatusread-onlycurrentThe statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.12ColumnprtSonetCurrentLSVread-onlycurrentThe counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.3TableprtSonetSectionLineIntervalTablenot-accessiblecurrentThe Section/Line Interval table.
1.3.6.1.4.1.164.3.1.6.2.1.3.1RowprtSectionLineIntervalEntrynot-accessiblecurrentAn entry in the SONET Section/Line Interval table. ifIndex of the section/line SONET layer of type sonet(39).
1.3.6.1.4.1.164.3.1.6.2.1.3.1.1ColumnprtSonetLineIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.3.1.6.2.1.3.1.2ColumnprtSonetIntervalLOSread-onlycurrentThe counter associated with the number of LOS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.3ColumnprtSonetIntervalLOFread-onlycurrentThe counter associated with the number of LOF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.4ColumnprtSonetIntervalLineAISread-onlycurrentThe counter associated with the number of Line AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.5ColumnprtSonetIntervalLineFERFread-onlycurrentThe counter associated with the number of Line FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.6ColumnprtSonetIntervalSectionBIPread-onlycurrentThe counter associated with the number of Section BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.7ColumnprtSonetIntervalLineBIPread-onlycurrentThe counter associated with the number of Line BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.8ColumnprtSonetIntervalLineFEBEread-onlycurrentThe counter associated with the number of Line FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.9ColumnprtSonetIntervalUASread-onlycurrentThe counter associated with the number of UAS encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.10ColumnprtSonetIntervalSESread-onlycurrentThe counter associated with the number of SES encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.11ColumnprtSonetIntervalESread-onlycurrentThe number of Errored Seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.12ColumnprtSonetIntervalStatusread-onlycurrentThe statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.13ColumnprtSonetIntervalLSVread-onlycurrentThe counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in one of the previous 96, individual 15 minute…
1.3.6.1.4.1.164.3.1.6.2.1.4TableprtSonetPathCurrentTablenot-accessiblecurrentThe SONET Path Current table.
1.3.6.1.4.1.164.3.1.6.2.1.4.1RowprtPathCurrentEntrynot-accessiblecurrentAn entry in the SONET Path Current table. ifIndex of the Path SONET layer of type sonetPath(50).
1.3.6.1.4.1.164.3.1.6.2.1.4.1.1ColumnprtSonetCurrentPathAISread-onlycurrentThe counter associated with the number of Path AIS seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.4.1.2ColumnprtSonetCurrentPathFERFread-onlycurrentThe counter associated with the number of Path FERF seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.4.1.3ColumnprtSonetCurrentLOPread-onlycurrentThe counter associated with the number LOP seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.4.1.4ColumnprtSonetCurrentSLMread-onlycurrentThe counter associated with the number of SLM seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.4.1.5ColumnprtSonetCurrentLOCread-onlycurrentThe counter associated with the number of LOC seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.4.1.6ColumnprtSonetCurrentPathBIPread-onlycurrentThe counter associated with the number of Path BIP errors, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.4.1.7ColumnprtSonetCurrentPathFEBEread-onlycurrentThe counter associated with the number of Path FEBE errors, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.5TableprtSonetPathIntervalTablenot-accessiblecurrentThe Path Interval table.
1.3.6.1.4.1.164.3.1.6.2.1.5.1RowprtPathIntervalEntrynot-accessiblecurrentAn entry in the SONET Path Interval table.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.1ColumnprtSonetPathIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.3.1.6.2.1.5.1.2ColumnprtSonetIntervalPathAISread-onlycurrentThe counter associated with the number of Path AIS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.3ColumnprtSonetIntervalPathFERFread-onlycurrentThe counter associated with the number of Path FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.4ColumnprtSonetIntervalLOPread-onlycurrentThe counter associated with the number of LOP seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.5ColumnprtSonetIntervalSLMread-onlycurrentThe counter associated with the number of SLM seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.6ColumnprtSonetIntervalLOCread-onlycurrentThe counter associated with the number of LOC seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.7ColumnprtSonetIntervalPathBIPread-onlycurrentThe counter associated with the number of Path BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.8ColumnprtSonetIntervalPathFEBEread-onlycurrentThe counter associated with the number of Path FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.2NodeprtSonetConfig
1.3.6.1.4.1.164.3.1.6.2.2.1NodeprtSonetGen
1.3.6.1.4.1.164.3.1.6.2.2.1.1TableprtSonetGenTablenot-accessiblecurrentSonet/SDH general port configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.1.1.1RowprtSonetGenEntrynot-accessiblecurrentAn entry in the Sonet/SDH general port configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.1ColumnprtSonetGenCnfgIdxread-onlycurrentThis object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati…
1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.2ColumnprtSonetGenIdxread-onlycurrentThis object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.
1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.3ColumnprtSonetGenSdThresholdread-writecurrentSD=Signal Degraded Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10E-4 n5= …
1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.4ColumnprtSonetGenEedThresholdread-writecurrentEED=Excessive Error Defect Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10…
1.3.6.1.4.1.164.3.1.6.2.2.2NodeprtSonetStm1
1.3.6.1.4.1.164.3.1.6.2.2.2.1TableprtSonetStm1Tablenot-accessiblecurrentSonet/SDH STM-1 port configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1RowprtSonetStm1Entrynot-accessiblecurrentAn entry in the Sonet/SDH STM-1 port configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.1ColumnprtSonetStm1CnfgIdxread-onlycurrentThis object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati…
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.2ColumnprtSonetStm1Idxread-onlycurrentThis object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.3ColumnprtSonetStm1ClockSrcread-writecurrentClock Source of the STM-1 port. lbt = Loop Back Timing.
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.4ColumnprtSonetStm1DccModeread-writecurrentDCC Mode. DCC=Data Communication Channel. d1ToD3 = D1-D3 bytes are used (RS=Regeneration Section). d4ToD12= D4-D12 bytes are used (MS=Multiplexing Section).
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.5ColumnprtSonetStm1RoutingProtread-writecurrentRouting Protocol.
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.6ColumnprtSonetStm1MngProtread-writecurrentManagement Protocol over DCC: Proprietary, PPP or Frame Relay.
1.3.6.1.4.1.164.3.1.6.2.2.3NodeprtSonetVc
1.3.6.1.4.1.164.3.1.6.2.2.3.1TableprtSonetVcTablenot-accessiblecurrentSonet/SDH VC port configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1RowprtSonetVcEntrynot-accessiblecurrentAn entry in the Sonet/SDH VC port configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.1ColumnprtSonetVcCnfgIdxread-onlycurrentThis object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati…
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.2ColumnprtSonetVcIdxread-onlycurrentThis object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.3ColumnprtSonetVcJTxPathTraceEnableread-writecurrentEnable/Disable Transmitting Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer.
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.4ColumnprtSonetVcJRxPathTraceEnableread-writecurrentEnable/Disable checking Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer.
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.5ColumnprtSonetVcJPathTraceread-writecurrentJy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer. This object is applicable only if one of the previous 2 objects is 'enable'.
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.6ColumnprtSonetVcConnectread-writecurrentConnect VCn (n - 11,12,2,3,4) port (yes/no).
1.3.6.1.4.1.164.3.1.6.2.2.3.2TableprtSonetTuTablenot-accessiblecurrentThe write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch).
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1RowprtSonetTuEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.1ColumnprtSonetTuCnfgIdxread-onlycurrentThis object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati…
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.2ColumnprtSonetTuPrtIdxread-onlycurrentThis object indicates a unique port or interface number. For port numbering, see product's spec. For some products, the numbering can equal ifIndex.
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.3ColumnprtSonetTuIdxread-onlycurrentThis object indicates a unique TU (Tributary Unit) within VC-4. The valid TUs are 1..63.
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.4ColumnprtSonetTuConPrtIdxread-onlycurrentThis object indicates the connected port, when prtSonetTuType=connect. For port numbering, see product's spec. For some products, the numbering can equal ifInd…
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.5ColumnprtSonetTuTyperead-createcurrentThe type of TU (Tributary Unit). connect - connected to one of the E1 ports. TUs that are not connected will not exist in this table.
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.6ColumnprtSonetTuModeread-createcurrentTU Mode of connection. addAndDrop - Add & Drop add - Add (TU receives from the E1 ports).
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.7ColumnprtSonetTuRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.3.1.6.2.3NodeprtSonetXConnect
1.3.6.1.4.1.164.3.1.6.2.3.1TableprtSonetXConnectTablenot-accessiblecurrentThe write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch).
1.3.6.1.4.1.164.3.1.6.2.3.1.1RowprtSonetXConnectEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.6.2.3.1.1.1ColumnprtSonetXConnectCnfgIdxread-onlycurrentThis object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati…
1.3.6.1.4.1.164.3.1.6.2.3.1.1.2ColumnprtSonetXConnectPrtIdxread-onlycurrentThis object indicates a unique port or interface number. For port numbering, see product's spec. For some products, the numbering can equal ifIndex.
1.3.6.1.4.1.164.3.1.6.2.3.1.1.3ColumnprtSonetXConnectConPrtIdxread-onlycurrentThis object indicates the connected port. For port numbering, see product's spec. For some products, the numbering can equal ifIndex. notApplicable - will be i…
1.3.6.1.4.1.164.3.1.6.2.3.1.1.4ColumnprtSonetXConnectAUGIdxread-onlycurrentThis object indicates an AUG (Administrative Unit Group) within STM-N. The valid AUGs values are: 1 for STM-1 1...4 for STM-4, 1..16 for STM-16 and 1..64 for S…
1.3.6.1.4.1.164.3.1.6.2.3.1.1.5ColumnprtSonetXConnectTUG3Idxread-onlycurrentThis object indicates a TUG-3 (Tributary Unit Group 3) within VC-4. The valid TUG3s are values are 1..3. and 255 which designates NA
1.3.6.1.4.1.164.3.1.6.2.3.1.1.6ColumnprtSonetXConnectTUG2Idxread-onlycurrentThis object indicates a TUG2 (Tributary Unit Group 2 ) within VC-3. The valid TUG2's values are 1..7 and 255 which designates NA
1.3.6.1.4.1.164.3.1.6.2.3.1.1.7ColumnprtSonetXConnectTUnIdxread-onlycurrentThis object indicates a TUn within TUG-2 or TUG-3 (Tributary Unit n, where n is 2, 12 or 11 within TUG-2, or 3 within TUG-3) valid values are 1 for TU-2 1 for …
1.3.6.1.4.1.164.3.1.6.2.3.1.1.8ColumnprtSonetXConnectRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.3.1.6.2.3.1.1.9ColumnprtSonetXConnectDirectionread-createcurrentTU direction of connection. rx=Drop tx=Add both = Add & Drop
1.3.6.1.4.1.164.3.1.6.2.3.1.1.10ColumnprtSonetXConnectTuNumberread-createcurrentThis object indicates which TU is used in prtSonetXConnectTUnIdx
1.3.6.1.4.1.164.3.1.6.3Nodeds3Interface
1.3.6.1.4.1.164.3.1.6.3.1NodeprtDs3PerfHistory
1.3.6.1.4.1.164.3.1.6.3.1.1TableprtSDs3IfTablenot-accessiblecurrentThe DS3 interface table.
1.3.6.1.4.1.164.3.1.6.3.1.1.1RowprtDs3IfEntrynot-accessiblecurrentAn entry in the DS3 interface table.
1.3.6.1.4.1.164.3.1.6.3.1.1.1.1ColumnprtDs3IfTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the near end current error- measurement period.
1.3.6.1.4.1.164.3.1.6.3.1.1.1.2ColumnprtDs3IfValidIntervalsread-onlycurrentThe number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 h…
1.3.6.1.4.1.164.3.1.6.3.1.2TableprtDs3CurrentTablenot-accessiblecurrentThe DS3 Current table.
1.3.6.1.4.1.164.3.1.6.3.1.2.1RowprtDs3CurrentEntrynot-accessiblecurrentAn entry in the DS3 Current table.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.1ColumnprtDs3CurrentLOSread-onlycurrentThe counter associated with the number of LOS seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.2ColumnprtDs3CurrentOOFread-onlycurrentThe counter associated with the number of OOF seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.3ColumnprtDs3CurrentLOCread-onlycurrentThe counter associated with the number of LOC seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.4ColumnprtDs3CurrentAISread-onlycurrentThe counter associated with the number of AIS seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.5ColumnprtDs3CurrentRDIread-onlycurrentThe counter associated with the number of RDI seconds, encountered by a DS3 interface.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.6ColumnprtDs3CurrentUASread-onlycurrentThe counter associated with the number of UAS, encountered by a SONET interface.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.7ColumnprtDs3CurrentBIPread-onlycurrentThe counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.8ColumnprtDs3CurrentFEBEread-onlycurrentThe counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.9ColumnprtDs3CurrentSLMread-onlycurrentThe counter associated with the number of SLM seconds, encountered by an E3 (only ) interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.10ColumnprtDs3CurrentSESread-onlycurrentThe counter associated with the number of SES encountered by a E3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.11ColumnprtDs3CurrentESread-onlycurrentThe number of Errored Seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.12ColumnprtDs3CurrentBitParityread-onlycurrentBit Parity Error counter. Relevant to T3 only.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.13ColumnprtDs3CurrentPlcpLOFread-onlycurrentThe counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter …
1.3.6.1.4.1.164.3.1.6.3.1.2.1.14ColumnprtDs3CurrentPlcpRAIread-onlycurrentReceiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.15ColumnprtDs3CurrentPlcpBIPread-onlycurrentThe counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (exte…
1.3.6.1.4.1.164.3.1.6.3.1.2.1.16ColumnprtDs3CurrentPlcpFEBEread-onlycurrentThe counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (ext…
1.3.6.1.4.1.164.3.1.6.3.1.2.1.17ColumnprtDs3CurrentBPVread-onlycurrentNumber of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Electrical Line of Fo…
1.3.6.1.4.1.164.3.1.6.3.1.2.1.18ColumnprtDs3CurrentLCEread-onlycurrentNumber of LCE (Link Code Errors) encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.19ColumnprtDs3CurrentStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.3.1.3TableprtDs3IntervalTablenot-accessiblecurrentThe DS3 Interval table.
1.3.6.1.4.1.164.3.1.6.3.1.3.1RowprtDs3IntervalEntrynot-accessiblecurrentAn entry in the DS3 Interval table.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.1ColumnprtDs3IntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.3.1.6.3.1.3.1.2ColumnprtDs3IntervalLOSread-onlycurrentThe counter associated with the number of LOS seconds , encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.3ColumnprtDs3IntervalOOFread-onlycurrentThe counter associated with the number of OOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.4ColumnprtDs3IntervalLOCread-onlycurrentThe counter associated with the number of LOC seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.5ColumnprtDs3IntervalAISread-onlycurrentThe counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.6ColumnprtDs3IntervalRDIread-onlycurrentThe counter associated with the number of RDI seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.7ColumnprtDs3IntervalUASread-onlycurrentThe counter associated with the number of UAS, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.8ColumnprtDs3IntervalBIPread-onlycurrentThe counter associated with the number of BIP errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.9ColumnprtDs3IntervalFEBEread-onlycurrentThe counter associated with the number of FEBE errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.10ColumnprtDs3IntervalSLMread-onlycurrentThe counter associated with the number of SLM seconds, encountered by an E3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.11ColumnprtDs3IntervalSESread-onlycurrentThe counter associated with the number of SES encountered by a E3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.12ColumnprtDs3IntervalESread-onlycurrentThe number of Errored Seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.13ColumnprtDs3IntervalBitParityread-onlycurrentBit Parity Error counter. Relevant to T3 only.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.14ColumnprtDs3IntervalPlcpLOFread-onlycurrentThe counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter …
1.3.6.1.4.1.164.3.1.6.3.1.3.1.15ColumnprtDs3IntervalPlcpRAIread-onlycurrentReceiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.16ColumnprtDs3IntervalPlcpBIPread-onlycurrentThe counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (exte…
1.3.6.1.4.1.164.3.1.6.3.1.3.1.17ColumnprtDs3IntervalPlcpFEBEread-onlycurrentThe counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (ext…
1.3.6.1.4.1.164.3.1.6.3.1.3.1.18ColumnprtDs3IntervalBPVread-onlycurrentNumber of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Electrical Line of …
1.3.6.1.4.1.164.3.1.6.3.1.3.1.19ColumnprtDs3IntervalLCEread-onlycurrentNumber of LCE (Link Code Errors) encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/…
1.3.6.1.4.1.164.3.1.6.3.1.3.1.20ColumnprtDs3IntervalStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.3.1.4TableprtDs3TotalTablenot-accessiblecurrentA list of Total entries.
1.3.6.1.4.1.164.3.1.6.3.1.4.1RowprtDs3TotalEntrynot-accessiblecurrentAn entry of Total table.
1.3.6.1.4.1.164.3.1.6.3.1.4.1.6ColumnprtDs3TotalUASread-onlycurrentNumber of UASs (Unavailable Seconds) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
1.3.6.1.4.1.164.3.1.6.3.1.4.1.17ColumnprtDs3TotalBPVread-onlycurrentNumber of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
1.3.6.1.4.1.164.3.1.6.3.1.4.1.18ColumnprtDs3TotalLCEread-onlycurrentNumber of LCE (Link Code Errors) encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
1.3.6.1.4.1.164.3.1.6.4Nodeds1Interface
1.3.6.1.4.1.164.3.1.6.4.1NodeprtDs1PerfHistory
1.3.6.1.4.1.164.3.1.6.4.1.2Tabledsx1XCurrentTablenot-accessiblecurrentA list of current statistics entries. This table contains additional objects for the current table.
1.3.6.1.4.1.164.3.1.6.4.1.2.1Rowdsx1XCurrentEntrynot-accessiblecurrentAn entry containing additional statistical counters applicable to a particular current table.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.1Columndsx1CurrentLOSread-onlycurrentThe counter associated with the number of LOS seconds, encountered by a DS1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.2Columndsx1CurrentLOFread-onlycurrentThe counter associated with the number of LOF seconds, encountered by a DS1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.3Columndsx1CurrentLOCread-onlycurrentLoss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation .
1.3.6.1.4.1.164.3.1.6.4.1.2.1.4Columndsx1CurrentAISread-onlycurrentThe counter associated with the number of AIS seconds, encountered by a DS1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.5Columndsx1CurrentRAIread-onlycurrentRemote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received…
1.3.6.1.4.1.164.3.1.6.4.1.2.1.6Columndsx1CurrentLOMFread-onlycurrentLoss of Multi-Frame sequence in E1 time slot 16.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.7Columndsx1CurrentFEBEread-onlycurrentFar End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.8Columndsx1CurrentStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.4.1.2.1.9Columndsx1CurrentBPVread-onlycurrentThe counter associated with the number of BPVs (Bi-Polar Violations) encountered by a DS1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.10Columndsx1CurrentLOCRCMFread-onlycurrentLoss of CRC4 Multi-Frame sequence in E1.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.11Columndsx1CurrentLOFCread-onlycurrentCounts the number of loss of frame events measured. encountered in the current 15 minute interval
1.3.6.1.4.1.164.3.1.6.4.1.3Tabledsx1XIntervalTablenot-accessiblecurrentA list of Interval entries. This table contains additional objects for the interval table.
1.3.6.1.4.1.164.3.1.6.4.1.3.1Rowdsx1XIntervalEntrynot-accessiblecurrentAn entry containing additional statistical counters applicable to a particular interval table.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.1Columndsx1IntervalLOSread-onlycurrentThe counter associated with the number of LOS seconds , encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.2Columndsx1IntervalLOFread-onlycurrentThe counter associated with the number of OOF seconds, encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.3Columndsx1IntervalLOCread-onlycurrentLoss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation .
1.3.6.1.4.1.164.3.1.6.4.1.3.1.4Columndsx1IntervalAISread-onlycurrentThe counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.5Columndsx1IntervalRAIread-onlycurrentRemote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received…
1.3.6.1.4.1.164.3.1.6.4.1.3.1.6Columndsx1IntervalLOMFread-onlycurrentLoss of Multi-Frame sequence in E1 time slot 16.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.7Columndsx1IntervalFEBEread-onlycurrentFar End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in one of the previous 96, individual, 15 minute inte…
1.3.6.1.4.1.164.3.1.6.4.1.3.1.8Columndsx1IntervalStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.4.1.3.1.9Columndsx1IntervalBPVread-onlycurrentThe counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.10Columndsx1IntervalLOCRCMFread-onlycurrentLoss of CRC4 Multi-Frame sequence in E1.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.11Columndsx1IntervalLOFCread-onlycurrentCounts the number of loss of frame events measured in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.4Tabledsx1XTotalTablenot-accessiblecurrentA list of Total statistics entries. This table contains additional objects for the Total table.
1.3.6.1.4.1.164.3.1.6.4.1.4.1Rowdsx1XTotalEntrynot-accessiblecurrentAn entry containing additional statistical counters applicable to a particular current table.
1.3.6.1.4.1.164.3.1.6.4.1.4.1.9Columndsx1TotalBPVread-onlycurrentThe counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute interval…
1.3.6.1.4.1.164.3.1.6.4.1.4.1.11Columndsx1TotalLOFCread-onlycurrentThe counter associated with the number loss of frames encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.4.1.164.3.1.6.4.2Tabledsx1XConfigTablenot-accessiblecurrentAn extension to the DS1 Configuration table.
1.3.6.1.4.1.164.3.1.6.4.2.1Rowdsx1XConfigEntrynot-accessiblecurrentAn entry containing additional configuration parameters.
1.3.6.1.4.1.164.3.1.6.4.2.1.1Columndsx1IdleCoderead-writecurrentByte pattern of the data received/transmitted in the E1T1 framer idle timeslots. Valid range: (0 - FF HEX).
1.3.6.1.4.1.164.3.1.6.4.2.1.2Columndsx1LineModeread-writecurrentT1 device operation mode. Valid for T1 only.
1.3.6.1.4.1.164.3.1.6.4.2.1.3Columndsx1dBTxGainread-writecurrentTransmit line Gain for T1 CSU line mode.
1.3.6.1.4.1.164.3.1.6.4.2.1.4Columndsx1RxSensitivityread-writecurrentDetermine the maximum attenuation of the receive signal that can be compensated for by the interface receive path. Not applicable for T1.
1.3.6.1.4.1.164.3.1.6.4.2.1.5Columndsx1RestoreTimeread-writecurrentUsed to change the sync. algorithms to reduce the time required for the port to return to normal operation after a RED alarm.
1.3.6.1.4.1.164.3.1.6.4.2.1.6Columndsx1TcFirstSignalread-writecurrentTrunk conditioning signal - value to be sent as a signal during the first 2.5 seconds after alarm detection. Range is 0x0..0xF. 0xFF is a NULL value. Valid for…
1.3.6.1.4.1.164.3.1.6.4.2.1.7Columndsx1TcSignalread-writecurrentTrunk conditioning signal value after alarm detection. Range is 0x1..0xF for E1, and 0x0..0xF for T1.
1.3.6.1.4.1.164.3.1.6.4.2.1.8Columndsx1TcPatternread-writecurrentTrunk conditioning data pattern to be sent upon a DS0 fail. Range is 0x0..0xFF.
1.3.6.1.4.1.164.3.1.6.4.2.1.9Columndsx1Scrambleread-writecurrentScrambling is an operation that randomizes the bits of the payload of the ATM cell by a polynom. This operation helps with the error detection mechanism of the…
1.3.6.1.4.1.164.3.1.6.4.2.1.10Columndsx1LineAdaptiveTimingModeread-writecurrentEnables end to end clock synchronization. Default value - off.
1.3.6.1.4.1.164.3.1.6.4.2.1.11Columndsx1TxClockSourceread-writecurrentThe source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock…
1.3.6.1.4.1.164.3.1.6.4.2.1.12Columndsx1AisEnableread-writecurrentEnable/ disable AIS transmit when Ethernet cable (for TDMoIP) is out (disconnected).
1.3.6.1.4.1.164.3.1.6.4.2.1.13Columndsx1TsEchoCancelread-writecurrentThis parameter defines for each TS whether Echo-Cancellation is on. Each bit represents one TS as follows: First octet bit'0'=not in use bit'1'= TS#1, bit'7' =…
1.3.6.1.4.1.164.3.1.6.4.2.1.14Columndsx1EchoCancelerModuleread-onlycurrentThis parameter indicates whether echo-cancellation module exists for this line.
1.3.6.1.4.1.164.3.1.6.5NodehdlcMibObjects
1.3.6.1.4.1.164.3.1.6.5.1TablehdlcTablenot-accessiblecurrentThe HDLC configuration table.
1.3.6.1.4.1.164.3.1.6.5.1.1RowhdlcEntrynot-accessiblecurrentDefines the contents of each line in the RAD HDLC Table.
1.3.6.1.4.1.164.3.1.6.5.1.1.1ColumnhdlcProtocolread-writecurrentThe HDLC protocol type V35 - HDLC encapsulated over V35 X21 - HDLC encapsulated over X21 RS530 - HDLC encapsulated over RS530
1.3.6.1.4.1.164.3.1.6.5.1.1.2ColumnhdlcRateResolutionread-writecurrentThe baud rate of the internal clock.
1.3.6.1.4.1.164.3.1.6.5.1.1.3ColumnhdlcTxClockSourceread-writecurrentThe baud rate of the internal clock.
1.3.6.1.4.1.164.3.1.6.5.1.1.4ColumnhdlcTerminalModeread-writecurrent.
1.3.6.1.4.1.164.3.1.6.5.1.1.5ColumnhdlcLoopbackStateread-writecurrentinternal - All data coming from the network port is looped back external - All data comming from the line is looped back.
1.3.6.1.4.1.164.3.1.6.5.1.1.6ColumnhdlcTxClockPolarityread-writecurrentnormal - The transmitted data is sampled at the middle of bit time inverse - The transmitted data is sampled at the end of the bit time (high data rate/long ca…
1.3.6.1.4.1.164.3.1.6.5.1.1.7ColumnhdlcFlowControlread-writecurrentEnable/Disable the CTS/RTS flow control signals.
1.3.6.1.4.1.164.3.1.6.5.1.1.8ColumnhdlcLineRateread-writecurrentThe rate values for HDLC are n*56/64Kbps, where 1<=n<=32, 64, 128 and the following values: 1544, 3088, 6176. The rate values for HSSI is nMbps, where 1<=n<=52.
1.3.6.1.4.1.164.3.1.6.5.1.1.9ColumnhdlcRxClockModeread-writecurrent.
1.3.6.1.4.1.164.3.1.6.5.1.1.10ColumnhdlcLOFread-onlycurrentTotal number of seconds the port is in Loss Of Frame state.
1.3.6.1.4.1.164.3.1.6.5.1.1.11ColumnhdlcRxClockPolarityread-writecurrentnormal - The received data is sampled at the middle of bit time inverse - The received data is sampled at the end of the bit time (high data rate/long cable).
1.3.6.1.4.1.164.3.3NodedacsMux
1.3.6.1.4.1.164.3.3.1NodesystemDacsMux
1.3.6.1.4.1.164.3.3.1.3NodesysStatus
1.3.6.1.4.1.164.3.3.1.3.7ScalarsysSClkSrcread-onlycurrentThis entry indicates the source of the system clock.
1.3.6.1.4.1.164.3.3.1.6NodesysConfig
1.3.6.1.4.1.164.3.3.1.6.1TablesysCClkSrcTablenot-accessiblecurrentAll the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. The write operation into the Table Ob…
1.3.6.1.4.1.164.3.3.1.6.1.1RowsysCClkSrcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.6.1.1.1ColumnsysCClkCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.3.1.6.1.1.2ColumnsysCClkSrcIdxread-onlycurrentAn index in the table. There are only two entries in the table. master - refers Master clock parameters fallback - refers Fallback clock parameters
1.3.6.1.4.1.164.3.3.1.6.1.1.3ColumnsysCClkSrcModeread-writecurrentThis entry indicates the source the nodal timing is locked to. none - is an invalid option for Master clock. internal - is an invalid option for Fallback clock…
1.3.6.1.4.1.164.3.3.1.6.1.1.4ColumnsysCClkSrcPrtread-writecurrentThis entry is valid only when working in rxClk mode. For invalid entry the return value will be 9999. The valid port number depends on the IO slot no., the ins…
1.3.6.1.4.1.164.3.3.1.6.1.1.5ColumnsysCClkStationFreqread-writecurrentThis entry indicates the frequency of the station clock when the source is 'station'. The value will be applicable only when the sysCClkSrcMode is 'station'.
1.3.6.1.4.1.164.3.3.1.6.1.1.6ColumnsysCClkRevertiveTimeoutread-writecurrentThe time in seconds in which the system will monitor the higher level clock source, before decision to revert to that clock. In case the time is zero, revertiv…
1.3.6.1.4.1.164.4NoderadBridges
1.3.6.1.4.1.164.4.1NodegenBridge
1.3.6.1.4.1.164.4.1.1ScalarradBridgeActionread-writecurrentThis variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions are not currently imple…
1.3.6.1.4.1.164.4.1.2ScalarradBridgeInactiveArpTimeOutread-writecurrentThis variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is del…
1.3.6.1.4.1.164.4.1.3TableradBridgeMaskTablenot-accessiblecurrentMask tables enable definition of forwarding restrictions and control of message flow in the internetwork. Each entry in this table defines a mask statement con…
1.3.6.1.4.1.164.4.1.3.1RowradBridgeMaskEntrynot-accessiblecurrentAn entry in table radBridgeMaskTable.
1.3.6.1.4.1.164.4.1.3.1.1ColumnradBridgeMaskTyperead-writecurrentDefines the type of mask entry.
1.3.6.1.4.1.164.4.1.3.1.2ColumnradBridgeMaskIfIndexread-writecurrentSpecifies the if Index of the interface to which the mask is applied.
1.3.6.1.4.1.164.4.1.3.1.3ColumnradBridgeMaskNumread-writecurrentThe Mask entry number, defined by its line number in the mask table.
1.3.6.1.4.1.164.4.1.3.1.4ColumnradBridgeMaskDestread-writecurrentSpecifies the type of destination address carried by the frame to which the mask will be applied. Unassigned-condition deactivates the mask entry.
1.3.6.1.4.1.164.4.1.3.1.5ColumnradBridgeMaskPat1read-writecurrentDescribes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern.
1.3.6.1.4.1.164.4.1.3.1.6ColumnradBridgeMaskActiveBit1read-writecurrentSpecifies the positions of the wild card characters (*) in the radBridgeMaskPat1 field.
1.3.6.1.4.1.164.4.1.3.1.7ColumnradBridgeMaskFrom1read-writecurrentOffset base of radBridgeMaskPat1 within the frame. Net can be in some cases the data start point.
1.3.6.1.4.1.164.4.1.3.1.8ColumnradBridgeMaskOffset1read-writecurrentSpecifies the radBridgeMaskPat1 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm1.The mask offset is an even decimal number in …
1.3.6.1.4.1.164.4.1.3.1.9ColumnradBridgeMaskCond1read-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset1 the packet contains data th…
1.3.6.1.4.1.164.4.1.3.1.10ColumnradBridgeMaskPat2read-writecurrentDescribes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern.
1.3.6.1.4.1.164.4.1.3.1.11ColumnradBridgeMaskActiveBit2read-writecurrentSpecifies the positions of the wild card characters (*) in the radBridgeMaskPat2 field.
1.3.6.1.4.1.164.4.1.3.1.12ColumnradBridgeMaskFrom2read-writecurrentOffset base of radBridgeMaskPat2 within the frame. Net can be in some cases the data start point.
1.3.6.1.4.1.164.4.1.3.1.13ColumnradBridgeMaskOffset2read-writecurrentSpecifies the radBridgeMaskPat2 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm2.The mask offset is an even decimal number in …
1.3.6.1.4.1.164.4.1.3.1.14ColumnradBridgeMaskCond2read-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset2 the packet contains data th…
1.3.6.1.4.1.164.4.1.3.1.15ColumnradBridgeMaskPat3read-writecurrentDescribes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern.
1.3.6.1.4.1.164.4.1.3.1.16ColumnradBridgeMaskActiveBit3read-writecurrentSpecifies the positions of the wild card characters (*) in the radBridgeMaskPat3 field.
1.3.6.1.4.1.164.4.1.3.1.17ColumnradBridgeMaskFrom3read-writecurrentOffset base of radBridgeMaskPat3 within the frame. Net can be in some cases the data start point.
1.3.6.1.4.1.164.4.1.3.1.18ColumnradBridgeMaskOffset3read-writecurrentSpecifies the radBridgeMaskPat3 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm3. The mask offset is an even decimal number in…
1.3.6.1.4.1.164.4.1.3.1.19ColumnradBridgeMaskCond3read-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset3 the packet contains data th…
1.3.6.1.4.1.164.4.1.3.1.20ColumnradBridgeMaskOperread-writecurrentThe type of action to be taken if the frame meets the conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is remove…
1.3.6.1.4.1.164.4.1.4NoderadBridgeCOD
1.3.6.1.4.1.164.4.1.4.1TableradBridgeCODParamTablenot-accessiblecurrentThe table of COD parameters
1.3.6.1.4.1.164.4.1.4.1.1RowradBridgeCODEntrynot-accessiblecurrentEach radBridgeCODEntry consists of the following parameters
1.3.6.1.4.1.164.4.1.4.1.1.1ColumnradBridgeCODIfIndexread-onlycurrentThe interface to which this COD entry is applicable.
1.3.6.1.4.1.164.4.1.4.1.1.2ColumnradBridgeCODManualConnectread-writecurrentThe management station can start connection manually by setting this parameter
1.3.6.1.4.1.164.4.1.4.1.1.3ColumnradBridgeCODModeread-writecurrentIn answer mode only one incoming call may be accepted at a time. Other nodes attempting to access the local modem will receive a busy signal until the connecti…
1.3.6.1.4.1.164.4.1.4.1.1.4ColumnradBridgeCODConnectDelayread-writecurrentThe connect delay defines the minimum time period that the link must stay disconnected, between 2 succesive connections (in seconds).
1.3.6.1.4.1.164.4.1.4.1.1.5ColumnradBridgeCODisConnectDelayread-writecurrentThe disconnect delay defines the minimum time period the link must stay connected, between 2 succesive disconnections (in seconds).
1.3.6.1.4.1.164.4.1.4.1.1.6ColumnradBridgeCODImplicitSwitchread-writecurrentThe inplicit switch allows the user to ignore implicit triggers provided by the COD software.
1.3.6.1.4.1.164.4.1.4.1.1.7ColumnradBridgeCODNumAccessread-onlycurrentThe number of successful connections that have been established since the COD has been reset.
1.3.6.1.4.1.164.4.1.4.1.1.8ColumnradBridgeCODTotalConnecTimeread-onlycurrentThe sum of all the connect time intervals since the COD was reset.
1.3.6.1.4.1.164.4.1.4.2TableradBridgeCODTimeTriggerTablenot-accessiblecurrentThe table of COD parameters
1.3.6.1.4.1.164.4.1.4.2.1RowradBridgeCODTimeTriggerEntrynot-accessiblecurrentEach radBridgeCODTimeTriggerEntry consists of the following parameters
1.3.6.1.4.1.164.4.1.4.2.1.1ColumnradBridgeCODTimeIfIndexread-onlycurrentThe interface to which this COD Time Trigger entry is applicable.
1.3.6.1.4.1.164.4.1.4.2.1.2ColumnradBridgeCODDayread-onlycurrentThe day of the week in which the dial up connection operates.
1.3.6.1.4.1.164.4.1.4.2.1.3ColumnradBridgeCODTimeTriggerNumread-onlycurrentEvery day of the week the user can configure 3 dial up connections.
1.3.6.1.4.1.164.4.1.4.2.1.4ColumnradBridgeCODTimeTriggerFromread-writecurrentTime to start Dial Up connection, in format hh:mm.
1.3.6.1.4.1.164.4.1.4.2.1.5ColumnradBridgeCODTimeTriggerToread-writecurrentTime to terminate Dial Up connection, in format HH:MM.
1.3.6.1.4.1.164.4.1.4.2.1.6ColumnradBridgeCODTimeTriggerStatusread-writecurrentThe status of a table entry.
1.3.6.1.4.1.164.4.1.4.3NoderadBridgeCODTraffic
1.3.6.1.4.1.164.4.1.4.3.1TableradBridgeCODTrafficTablenot-accessiblecurrentThe table of COD Traffic trigger
1.3.6.1.4.1.164.4.1.4.3.1.1RowradBridgeCODTrafficEntrynot-accessiblecurrentEach radBridgeCODTrafficEntry consists of the following parameters.
1.3.6.1.4.1.164.4.1.4.3.1.1.1ColumnradBridgeCODProtocolTyperead-writecurrentThe Protocol Type of the Traffic Table
1.3.6.1.4.1.164.4.1.4.3.1.1.2ColumnradBridgeCODTrafficTriggerStatusread-writecurrentCommand of Status of the Protocol Traffic Trigger
1.3.6.1.4.1.164.4.1.4.3.2ScalarradBridgeCODRemoteIPAddrread-writecurrentThis is the Remote IP Address
1.3.6.1.4.1.164.4.1.4.3.3ScalarradBridgeCODIPMaskread-writecurrentThis is the Mask of the Remote IP Address
1.3.6.1.4.1.164.4.1.4.3.4ScalarradBridgeCODTrafficTriggerProtTyperead-writecurrentProtocol Type for the User Defined Protocol Traffic Trigger (3).
1.3.6.1.4.1.164.4.1.4.4TableradBridgeCODCondTablenot-accessiblecurrentThe table of COD Condition parameters
1.3.6.1.4.1.164.4.1.4.4.1RowradBridgeCODCondEntrynot-accessiblecurrentEach radBridgeCODCondEntry consists of the following parameters
1.3.6.1.4.1.164.4.1.4.4.1.1ColumnradBridgeCODCondIfIndexread-onlycurrentThe interface, this COD entry is applicable to.
1.3.6.1.4.1.164.4.1.4.4.1.2ColumnradBridgeCODOriginateConnectConditionread-writecurrentThis condition, allows the user to specify the condition under which the link is connected. The options are onPowerOn - On power on. whenAnyStationOnLan - When…
1.3.6.1.4.1.164.4.1.4.4.1.3ColumnradBridgeCODOriginateDisConnectConditionread-writecurrentThis condition allows the user to specify the condition under which the link is disconnected. The options are: noStationOnLan - When there is no station on lan…
1.3.6.1.4.1.164.4.1.4.4.1.4ColumnradBridgeCODOriginateDisConnectDelayread-writecurrentDelay time in seconds.
1.3.6.1.4.1.164.4.1.4.4.1.5ColumnradBridgeCODAnswerConnectConditionread-writecurrentCODCondAnswerConnect allows the user to specify the condition under which the link is connected. The options are: onPowerOn - On power on. whenAnyStationOnLan …
1.3.6.1.4.1.164.4.1.4.4.1.6ColumnradBridgeCODSpecificOnTrafficOIDConditionread-onlycurrentA reference to a specific entry in the radBridgeMaskTable, which describes the particular COD condition . If Connect or Disconnect Conditions are not onTraffic…
1.3.6.1.4.1.164.4.1.4.4.1.7ColumnradBridgeCODDisConnectMinimunFramesNumberread-writecurrentFrames rate.
1.3.6.1.4.1.164.4.1.5NoderadBridgeIPX
1.3.6.1.4.1.164.4.1.5.1NoderadBridgeIPXdriver
1.3.6.1.4.1.164.4.1.5.1.1ScalarradBridgeIPXForwardingread-writecurrentThe indication of whether this entity is acting as an IPX gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPX…
1.3.6.1.4.1.164.4.1.5.2NoderadBridgeIPXRip
1.3.6.1.4.1.164.4.1.5.2.1ScalarradBridgeIPXRipOutPacketsread-onlycurrentThe total number of packets transmitted by RIP.
1.3.6.1.4.1.164.4.1.5.2.2ScalarradBridgeIPXRipInPacketsread-onlycurrentThe total number of packets received by RIP. This will include any packets that are subsequently discarded.
1.3.6.1.4.1.164.4.1.5.2.3ScalarradBridgeIPXRipInDiscardsread-onlycurrentThe number of received packets discarded by RIP.
1.3.6.1.4.1.164.4.1.5.2.4ScalarradBridgeIPXRipTblNoOfEntriesread-onlycurrentThe max number of entries that exist in the RIP routing table.
1.3.6.1.4.1.164.4.1.5.2.5ScalarradBridgeIPXRipTblBcastTrigUpdateIntervalread-writecurrentThe default time interval (in seconds)between triggered RIP updates on a broadcast type interface. A triggered update occurs when a change is detected in the r…
1.3.6.1.4.1.164.4.1.5.2.6TableradBridgeIPXRipTablenot-accessiblecurrentThe routing table used by RIP to calculate routes to remote desination networks.
1.3.6.1.4.1.164.4.1.5.2.6.1RowradBridgeIPXRipTableEntrynot-accessiblecurrentThe routing information for one of this entity's destination networks.
1.3.6.1.4.1.164.4.1.5.2.6.1.1ColumnradBridgeIPXRipDestNetworkread-onlycurrentThe destination network address to which this entry's routing information pertains.
1.3.6.1.4.1.164.4.1.5.2.6.1.2ColumnradBridgeIPXRipPolicyread-onlycurrentA value specifying the precidence of the route. A value of zero means that the route is the best route, a value of one means that the route is the second best …
1.3.6.1.4.1.164.4.1.5.2.6.1.3ColumnradBridgeIPXRipForwardingRouterread-writecurrentThe IPX node address of the next hop (router) for the entry's associated destination network.
1.3.6.1.4.1.164.4.1.5.2.6.1.4ColumnradBridgeIPXRipNICread-writecurrentAn interface identifier specifying what IPX interface the next hop can be found on.
1.3.6.1.4.1.164.4.1.5.2.6.1.5ColumnradBridgeIPXRipTickMetricread-writecurrentThe metric, in terms of transit time, associated with the route given by the entry. This time is in terms of 1/18ths of a second.
1.3.6.1.4.1.164.4.1.5.2.6.1.6ColumnradBridgeIPXRipHopMetricread-writecurrentThe metric, in terms of distance , associated with the route given by the entry.
1.3.6.1.4.1.164.4.1.5.2.6.1.7ColumnradBridgeIPXRipAgingTimeread-onlycurrentThe last time that the entry was updated. The time will be provided in terms of the MIB-I object sysUpTime.
1.3.6.1.4.1.164.4.1.5.2.6.1.8ColumnradBridgeIPXRipValueStatusread-writecurrentThe entry status value; whether the entry is permanent (added statically), reachable or unreachable. In the latter two cases it would be added by RIP. A semiDy…
1.3.6.1.4.1.164.4.1.5.2.6.1.9ColumnradBridgeIPXRipForwardTyperead-writecurrentThe type of route. Note that local(2) refers to a route for which the next hop is the final destination; remote(3) refers to a route for which the next hop is …
1.3.6.1.4.1.164.4.1.5.2.7TableradBridgeIPXRipInfTablenot-accessiblecurrentThe RIP interface table.
1.3.6.1.4.1.164.4.1.5.2.7.1RowradBridgeIPXRipInfEntrynot-accessiblecurrentEach entry corresponds to one ifindex.
1.3.6.1.4.1.164.4.1.5.2.7.1.1ColumnradBridgeIPXRipInfIfIndexread-onlycurrentThis value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table.
1.3.6.1.4.1.164.4.1.5.2.7.1.2ColumnradBridgeIPXRipInfBcastUpdateread-writecurrentThe RIP periodic update interval, in seconds. Zero value corresponds to infinite interval.
1.3.6.1.4.1.164.4.1.5.2.7.1.3ColumnradBridgeIPXRipInfAgeMultiplierread-writecurrentThe holding multiplier for information received in RIP periodic updates. Zero value corresponds to infinite aging time.
1.3.6.1.4.1.164.4.1.5.3NoderadBridgeIPXSap
1.3.6.1.4.1.164.4.1.5.3.1ScalarradBridgeIPXSapOutPacketsread-onlycurrentThe total number of packets transmitted by SAP.
1.3.6.1.4.1.164.4.1.5.3.2ScalarradBridgeIPXSapInPacketsread-onlycurrentThe total number of packets received by SAP. This will include any packets that are subsequently discarded.
1.3.6.1.4.1.164.4.1.5.3.3ScalarradBridgeIPXSapInDiscardsread-onlycurrentThe number of received packets discarded by SAP.
1.3.6.1.4.1.164.4.1.5.3.4ScalarradBridgeIPXSapTblNoOfEntriesread-onlycurrentThe max number of entries that exist in the SAP Server Information table.
1.3.6.1.4.1.164.4.1.5.3.5ScalarradBridgeIPXSapTblBcastTrigUpdateIntervalread-writecurrentThe default time interval (in seconds) between triggered SAP updates on a broadcast style interface. A triggered update occurs when a change is detected in the…
1.3.6.1.4.1.164.4.1.5.3.6TableradBridgeIPXSapTablenot-accessiblecurrentThe Server Information table is used by SAP to store information of services which are available on the internetwork.
1.3.6.1.4.1.164.4.1.5.3.6.1RowradBridgeIPXSapTableEntrynot-accessiblecurrentThe server information for one of this entity's server entries.
1.3.6.1.4.1.164.4.1.5.3.6.1.1ColumnradBridgeIPXSapServerTyperead-onlycurrentThe type of the server for which this entry pertains.
1.3.6.1.4.1.164.4.1.5.3.6.1.2ColumnradBridgeIPXSapNameread-onlycurrentThe name of the server for which this entry pertains.
1.3.6.1.4.1.164.4.1.5.3.6.1.3ColumnradBridgeIPXSapNetworkread-writecurrentThe IPX network address of the host on which this server exists.
1.3.6.1.4.1.164.4.1.5.3.6.1.4ColumnradBridgeIPXSapNoderead-writecurrentThe IPX node address of the host on which this server exists.
1.3.6.1.4.1.164.4.1.5.3.6.1.5ColumnradBridgeIPXSapSocketread-writecurrentThe IPX socket number that is being used by the server to which this entry pertains.
1.3.6.1.4.1.164.4.1.5.3.6.1.6ColumnradBridgeIPXSapHopsToServerread-writecurrentThe number of hops to the entity on which this server exists.
1.3.6.1.4.1.164.4.1.5.3.6.1.7ColumnradBridgeIPXSapNICread-writecurrentAn Network Interface Card identifier specifying what IPX interface the next hop can be found on.
1.3.6.1.4.1.164.4.1.5.3.6.1.8ColumnradBridgeIPXSapAgingTimeread-onlycurrentThe last time that the entry was updated. The time will be provided in terms of the MIB-I object sysUpTime.
1.3.6.1.4.1.164.4.1.5.3.6.1.9ColumnradBridgeIPXSapStatusread-writecurrentThe status of the entry.
1.3.6.1.4.1.164.4.1.5.3.7TableradBridgeIPXSapInfTablenot-accessiblecurrentThe Sap interface table.
1.3.6.1.4.1.164.4.1.5.3.7.1RowradBridgeIPXSapInfEntrynot-accessiblecurrentEach entry corresponds to one ifindex.
1.3.6.1.4.1.164.4.1.5.3.7.1.1ColumnradBridgeIPXSapInfIfIndexread-onlycurrentThis value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table.
1.3.6.1.4.1.164.4.1.5.3.7.1.2ColumnradBridgeIPXSapInfBcastUpdateread-writecurrentThe SAP periodic update interval, in seconds. Zero value corresponds to infinite interval.
1.3.6.1.4.1.164.4.1.5.3.7.1.3ColumnradBridgeIPXSapInfAgeMultiplierread-writecurrentThe holding multiplier for information received in SAP periodic updates. Zero value corresponds to infinite aging time.
1.3.6.1.4.1.164.4.1.6NodenewMasking
1.3.6.1.4.1.164.4.1.6.1ScalarmaskingMaxEntriesread-onlycurrentThe maximum number of entries in the masking table.
1.3.6.1.4.1.164.4.1.6.2ScalarmaskingCurrentEntriesread-onlycurrentThe number of entries in the mask table.
1.3.6.1.4.1.164.4.1.6.3TablemaskingTablenot-accessiblecurrentThis is the new masking scheme. Mask tables enable definition of forwarding restrictions and control of message flow in the internetwork. Each entry in this ta…
1.3.6.1.4.1.164.4.1.6.3.1RowmaskingEntrynot-accessiblecurrentDefines the contents of each line in the mask table.
1.3.6.1.4.1.164.4.1.6.3.1.1ColumnmaskingTyperead-writecurrentDefines the type of mask entry.
1.3.6.1.4.1.164.4.1.6.3.1.2ColumnmaskingIfIndexread-writecurrentSpecifies the ifIndex of the interface to which the mask is applied.
1.3.6.1.4.1.164.4.1.6.3.1.3ColumnmaskingIndexread-writecurrentAn index to the masking table. This number should not be greater than maskingMaxEntries
1.3.6.1.4.1.164.4.1.6.3.1.4ColumnmaskingProtocolTyperead-writecurrentThe base protocol for masking. IPX, IP, others.
1.3.6.1.4.1.164.4.1.6.3.1.5ColumnmaskingSmartMaskOIDread-onlycurrentA reference to a specific Smart mask table (old radBridgeMaskTable) which enables a more specific mask type. If this information is not available, its value sh…
1.3.6.1.4.1.164.4.1.6.3.1.6ColumnmaskingFrameTyperead-writecurrentEnables the user to decide about frame type * all frame * just broadcast * just multicast.
1.3.6.1.4.1.164.4.1.6.3.1.7ColumnmaskingFrameTypeConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingFrameType the packet contains data that m…
1.3.6.1.4.1.164.4.1.6.3.1.8ColumnmaskingSourceAddressread-writecurrentThe source address is according to the maskingMacOrNet and maskingProtocolType variables. In case of 'MAC' enter 6 bytes (48 bit) of source address. In case of…
1.3.6.1.4.1.164.4.1.6.3.1.9ColumnmaskingSourceActiveBitsread-writecurrentSpecifies the positions of the wild card characters (*) in the maskingSourceAddress field. Only the 1's bit will be taken in considerations.
1.3.6.1.4.1.164.4.1.6.3.1.10ColumnmaskingSourceMacOrNetread-writecurrentThe variable maskingSourceAddress and maskingSourceActiveBits will be treated as MAC, or NET address. - If maskingProtocolType = 'all', 'sna', 'netbios', dec o…
1.3.6.1.4.1.164.4.1.6.3.1.11ColumnmaskingSourceConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingSourceAddress (in conjunction with maskin…
1.3.6.1.4.1.164.4.1.6.3.1.12ColumnmaskingDestAddressread-writecurrentIf maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. The destination a…
1.3.6.1.4.1.164.4.1.6.3.1.13ColumnmaskingDestActiveBitsread-writecurrentIf maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the pos…
1.3.6.1.4.1.164.4.1.6.3.1.14ColumnmaskingDestMacOrNetread-writecurrentIf maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. - If maskingProto…
1.3.6.1.4.1.164.4.1.6.3.1.15ColumnmaskingDestConditionread-writecurrentIf maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the log…
1.3.6.1.4.1.164.4.1.6.3.1.16ColumnmaskingLowLevelProtread-writecurrentThis field is set in conjunction with the maskingProtocolType variable. This variable specifies the low level protocol. The IPX socket entered in maskingDestAd…
1.3.6.1.4.1.164.4.1.6.3.1.17ColumnmaskingLowLevelProtConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingLowLevelProt the packet contains data tha…
1.3.6.1.4.1.164.4.1.6.3.1.18ColumnmaskingHighLevelProtread-writecurrentThis field is set in connection to the maskingProtocolType variable. This variable specifies the high level protocols (application). As for today it supports j…
1.3.6.1.4.1.164.4.1.6.3.1.19ColumnmaskingHighLevelProtConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingHighLevelProt the packet contains data th…
1.3.6.1.4.1.164.4.1.6.3.1.20ColumnmaskingPortNumread-writecurrentThe port number is the same as in high level protocol. It specifies the dest. port in IP case or the dest. socket in case of IPX & apple protocols. IP - This o…
1.3.6.1.4.1.164.4.1.6.3.1.21ColumnmaskingPortNumConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingPortNum the packet contains data that mat…
1.3.6.1.4.1.164.4.1.6.3.1.22ColumnmaskingOperationread-writecurrentThe type of action to be taken if the frame meets the conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is remove…
1.3.6.1.4.1.164.4.1.6.3.1.23ColumnmaskingSrcPortNumread-writecurrentThe source port number. For IP: No Condition. For IPX: This object is applicable only if the socket entered in maskingSourceAddress is don't care (00) and mask…
1.3.6.1.4.1.164.4.1.6.3.1.24ColumnmaskingSrcPortNumConditionread-writecurrentThe same as 'maskingPortNumCondition'. Relates to source port.
1.3.6.1.4.1.164.5NoderadConverters
1.3.6.1.4.1.164.6NoderadGen
1.3.6.1.4.1.164.6.1Nodesystems
1.3.6.1.4.1.164.6.1.0IdentitysystemsEventscurrentThe events for RAD products.
1.3.6.1.4.1.164.6.1.0.1NotificationtftpStatusChangeTrapcurrentThis trap is sent whenever the status of tftp changed.
1.3.6.1.4.1.164.6.1.0.2NotificationagnStatusChangeTrapcurrentThis trap is sent whenever the state of the entity the agent is responsible for changed. TDM devices will send agnTestStatus variable to indicate the current t…
1.3.6.1.4.1.164.6.1.0.3NotificationprtStatusChangeTrapcurrentThis trap is sent whenever the state of a port changed. Attached, will be parameter/s that indicate the new port status. The attached variables will be specifi…
1.3.6.1.4.1.164.6.1.0.4NotificationswdlStatusResultcurrentThis notification is sent when Software Down Load is finished. The attached object indicates the File Name.
1.3.6.1.4.1.164.6.1.0.5NotificationintSwdlSlotFileMismatchcurrentThis notification is sent when the card in the chosen slot doesn't match the chosen file. The attached object indicates the File Name.
1.3.6.1.4.1.164.6.1.0.6NotificationagnCounterChangecurrentThis notification is sent when the value of a specific Counter is changed. Agent can send as attached object the updated Counter. For details about this Counte…
1.3.6.1.4.1.164.6.1.0.7NotificationprtClkSrcChangeTrapcurrentThis trap is sent upon any port clock change.
1.3.6.1.4.1.164.6.1.0.8NotificationmoduleFailTrapcurrentThis trap is sent upon a module failure.
1.3.6.1.4.1.164.6.1.0.9NotificationmoduleInitFailTrapcurrentThis trap is sent upon a module initialization failure.
1.3.6.1.4.1.164.6.1.0.10NotificationclkSrcChangeTrapcurrentThis trap is sent upon any change in Clock Source.
1.3.6.1.4.1.164.6.1.0.11NotificationagnUploadDataTrapcurrentThis trap is sent upon an upload data session termination. For more details see product specification.
1.3.6.1.4.1.164.6.1.0.12NotificationenrollmentTrapcurrentThis trap is a periodically trap, which sent to manager untill Agent get any response (Get or Set) from this manager.
1.3.6.1.4.1.164.6.1.0.13NotificationagnPowerFailureTrapcurrentThis trap is sent upon power failure. It is applicable for devices having one PS unit, which sense in advance the failure, and still have time to send this tra…
1.3.6.1.4.1.164.6.1.1NoderadSysTR
1.3.6.1.4.1.164.6.1.1.1NoderadRADring
1.3.6.1.4.1.164.6.1.1.2NoderadTMA
1.3.6.1.4.1.164.6.1.1.3NoderadRingMonitor
1.3.6.1.4.1.164.6.1.2NoderadSysFddi
1.3.6.1.4.1.164.6.1.2.1NoderadFDX100
1.3.6.1.4.1.164.6.1.3NoderadSysWan
1.3.6.1.4.1.164.6.1.3.0IdentityradSysWanEventscurrentThe events for RAD Wan products.
1.3.6.1.4.1.164.6.1.3.1NoderadMP2100
1.3.6.1.4.1.164.6.1.3.2NoderadMP2104
1.3.6.1.4.1.164.6.1.3.3NoderadMP2100B
1.3.6.1.4.1.164.6.1.3.4NoderadMP2100F
1.3.6.1.4.1.164.6.1.3.5NoderadMP2100H
1.3.6.1.4.1.164.6.1.3.6NoderadMP2104H
1.3.6.1.4.1.164.6.1.3.7NoderadMP2200B
1.3.6.1.4.1.164.6.1.3.8NoderadMP2200F
1.3.6.1.4.1.164.6.1.3.9NoderadMX3000
1.3.6.1.4.1.164.6.1.3.10NoderadMX3004
1.3.6.1.4.1.164.6.1.3.11NoderadMX30
1.3.6.1.4.1.164.6.1.3.12NoderadMX300
1.3.6.1.4.1.164.6.1.3.13NoderadVOIP
1.3.6.1.4.1.164.6.1.3.15NoderadKM2100
1.3.6.1.4.1.164.6.1.3.16NoderadKM2104
1.3.6.1.4.1.164.6.1.3.20NoderadDXC30
1.3.6.1.4.1.164.6.1.3.21NoderadDXC10A
1.3.6.1.4.1.164.6.1.3.22NoderadDXC8R
1.3.6.1.4.1.164.6.1.3.23NoderadDXC30E
1.3.6.1.4.1.164.6.1.3.24NoderadDXC3000
1.3.6.1.4.1.164.6.1.3.25NoderadDXC8RNew
1.3.6.1.4.1.164.6.1.3.29NoderadFcdE1L
1.3.6.1.4.1.164.6.1.3.30NoderadFcdT1
1.3.6.1.4.1.164.6.1.3.31NoderadFcdE1
1.3.6.1.4.1.164.6.1.3.32NoderadFcdE1I
1.3.6.1.4.1.164.6.1.3.33NoderadFcdT1M
1.3.6.1.4.1.164.6.1.3.34NoderadFcdE1M
1.3.6.1.4.1.164.6.1.3.35NoderadFcdIP
1.3.6.1.4.1.164.6.1.3.36NoderadFcdT1A
1.3.6.1.4.1.164.6.1.3.37NoderadFcdE1A
1.3.6.1.4.1.164.6.1.3.38NoderadFcdW
1.3.6.1.4.1.164.6.1.3.39NoderadFcdSTM
1.3.6.1.4.1.164.6.1.3.40NoderadHtuE1Sa
1.3.6.1.4.1.164.6.1.3.41NoderadHtuE1
1.3.6.1.4.1.164.6.1.3.42NoderadHtu2Sa
1.3.6.1.4.1.164.6.1.3.43NoderadHtu2
1.3.6.1.4.1.164.6.1.3.44NoderadAsmi450R768Sa
1.3.6.1.4.1.164.6.1.3.45NoderadAsmi450R768
1.3.6.1.4.1.164.6.1.3.46NoderadAsmi450R1152Sa
1.3.6.1.4.1.164.6.1.3.47NoderadAsmi450R1152
1.3.6.1.4.1.164.6.1.3.48NoderadLrs12F
1.3.6.1.4.1.164.6.1.3.49NoderadLrs12B
1.3.6.1.4.1.164.6.1.3.51NoderadHcdE1Sa
1.3.6.1.4.1.164.6.1.3.52NoderadHcdE1
1.3.6.1.4.1.164.6.1.3.53NoderadHtuT1Sa
1.3.6.1.4.1.164.6.1.3.54NoderadHtuT1
1.3.6.1.4.1.164.6.1.3.55NoderadOptimux4E1
1.3.6.1.4.1.164.6.1.3.56NoderadOptimux4T1
1.3.6.1.4.1.164.6.1.3.57NoderadOptimuxXLE1
1.3.6.1.4.1.164.6.1.3.58NoderadOptimuxXLT1
1.3.6.1.4.1.164.6.1.3.59NoderadOptimuxXL16E1
1.3.6.1.4.1.164.6.1.3.60NoderadImx64
1.3.6.1.4.1.164.6.1.3.61NoderadImx6L
1.3.6.1.4.1.164.6.1.3.62NoderadImx2
1.3.6.1.4.1.164.6.1.3.63NoderadImx4T1
1.3.6.1.4.1.164.6.1.3.64NoderadImx4E1
1.3.6.1.4.1.164.6.1.3.65NoderadImx2T1E1
1.3.6.1.4.1.164.6.1.3.68NoderadOptimux4T1L
1.3.6.1.4.1.164.6.1.3.69NoderadOptimux4E1L
1.3.6.1.4.1.164.6.1.3.70NoderadHtuE1SaV2
1.3.6.1.4.1.164.6.1.3.71NoderadHtuE1V2
1.3.6.1.4.1.164.6.1.3.72NoderadFomiE3
1.3.6.1.4.1.164.6.1.3.73NoderadFomiT3
1.3.6.1.4.1.164.6.1.3.74NoderadOpt4E1C
1.3.6.1.4.1.164.6.1.3.75NoderadOpt4T1C
1.3.6.1.4.1.164.6.1.3.76NoderadPrbiE3
1.3.6.1.4.1.164.6.1.3.77NoderadPrbiT3
1.3.6.1.4.1.164.6.1.3.78NoderadHcd4Sa
1.3.6.1.4.1.164.6.1.3.79NoderadOptimuxT3
1.3.6.1.4.1.164.6.1.3.80NoderadFRmon
1.3.6.1.4.1.164.6.1.3.81NoderadIpMux4
1.3.6.1.4.1.164.6.1.3.82NoderadIpMux1
1.3.6.1.4.1.164.6.1.3.83NoderadIpMux16
1.3.6.1.4.1.164.6.1.3.84NoderadIpMux1E
1.3.6.1.4.1.164.6.1.3.85NoderadVmux2100
1.3.6.1.4.1.164.6.1.4NoderadSysBRG
1.3.6.1.4.1.164.6.1.4.1NoderadTRE1
1.3.6.1.4.1.164.6.1.4.2NoderadTRE1D
1.3.6.1.4.1.164.6.1.4.3NoderadTRE8
1.3.6.1.4.1.164.6.1.4.4NoderadTRE8D
1.3.6.1.4.1.164.6.1.4.5NoderadMBE1
1.3.6.1.4.1.164.6.1.4.6NoderadMBE1D
1.3.6.1.4.1.164.6.1.4.7NoderadMBE8
1.3.6.1.4.1.164.6.1.4.8NoderadMBE8D
1.3.6.1.4.1.164.6.1.4.9NoderadMLBT
1.3.6.1.4.1.164.6.1.4.10NoderadFEB4DAS
1.3.6.1.4.1.164.6.1.4.11NoderadTrimBrg10
1.3.6.1.4.1.164.6.1.4.12NoderadTrimBrg16
1.3.6.1.4.1.164.6.1.4.13NoderadRRTRE8
1.3.6.1.4.1.164.6.1.4.14NoderadRRTRE8D
1.3.6.1.4.1.164.6.1.4.15NoderadRRMLBT
1.3.6.1.4.1.164.6.1.4.16NoderadRRMLBTF
1.3.6.1.4.1.164.6.1.4.17NoderadRRTRE1D
1.3.6.1.4.1.164.6.1.4.18NoderadTRERAS
1.3.6.1.4.1.164.6.1.4.19NoderadTRERASa
1.3.6.1.4.1.164.6.1.4.20NoderadMBERAS
1.3.6.1.4.1.164.6.1.4.21NoderadMBERASa
1.3.6.1.4.1.164.6.1.4.22NoderadFEB4FDX
1.3.6.1.4.1.164.6.1.4.23NoderadFEB4SAS
1.3.6.1.4.1.164.6.1.4.24NoderadRRFTBDAS
1.3.6.1.4.1.164.6.1.4.25NoderadRRFTBSAS
1.3.6.1.4.1.164.6.1.4.26NoderadFTBDAS
1.3.6.1.4.1.164.6.1.4.27NoderadFTBSAS
1.3.6.1.4.1.164.6.1.4.28NoderadFastWay100
1.3.6.1.4.1.164.6.1.5NoderadSysCnvrtr
1.3.6.1.4.1.164.6.1.5.1NoderadSTC1
1.3.6.1.4.1.164.6.1.5.3NoderadSTC2
1.3.6.1.4.1.164.6.1.5.4NoderadSTC1UDP
1.3.6.1.4.1.164.6.1.5.6NoderadSTC2UDP
1.3.6.1.4.1.164.6.1.5.10NoderadFTC1
1.3.6.1.4.1.164.6.1.5.12NoderadFTC2
1.3.6.1.4.1.164.6.1.5.13NoderadFTC1UDP
1.3.6.1.4.1.164.6.1.5.15NoderadFTC2UDP
1.3.6.1.4.1.164.6.1.5.20NoderadSEC1
1.3.6.1.4.1.164.6.1.5.22NoderadSEC2
1.3.6.1.4.1.164.6.1.5.23NoderadSEC1UDP
1.3.6.1.4.1.164.6.1.5.25NoderadSEC2UDP
1.3.6.1.4.1.164.6.1.5.30NoderadFEC1
1.3.6.1.4.1.164.6.1.5.32NoderadFEC2
1.3.6.1.4.1.164.6.1.5.33NoderadFEC1UDP
1.3.6.1.4.1.164.6.1.5.35NoderadFEC2UDP
1.3.6.1.4.1.164.6.1.7NoderadSysStkHub
1.3.6.1.4.1.164.6.1.7.1NoderadRBHE
1.3.6.1.4.1.164.6.1.7.1.0IdentityradRBHEEventscurrentThe events for RAD Stackable products.
1.3.6.1.4.1.164.6.1.7.2NoderadRBHT
1.3.6.1.4.1.164.6.1.7.2.0IdentityradRBHTEventscurrentThe events for RAD Stackable products.
1.3.6.1.4.1.164.6.1.7.3NoderadETS4fddiDAS
1.3.6.1.4.1.164.6.1.7.4NoderadETS4fddiSAS
1.3.6.1.4.1.164.6.1.7.5NoderadSAHEMX
1.3.6.1.4.1.164.6.1.7.6NoderadSAHTM
1.3.6.1.4.1.164.6.1.7.7NoderadETS4
1.3.6.1.4.1.164.6.1.7.8NoderadSAHEMU
1.3.6.1.4.1.164.6.1.7.9Nodeunknown
1.3.6.1.4.1.164.6.1.7.10NoderadSAH16Eint
1.3.6.1.4.1.164.6.1.7.11NoderadSAH16Tint
1.3.6.1.4.1.164.6.1.7.12NoderadSAH16Eext
1.3.6.1.4.1.164.6.1.7.13NoderadSAH16Text
1.3.6.1.4.1.164.6.1.8NoderadSysPS
1.3.6.1.4.1.164.6.1.8.0IdentityradSysPSEventscurrentThe events for RAD Packet Switch (PS) products.
1.3.6.1.4.1.164.6.1.8.1NoderadSPS2
1.3.6.1.4.1.164.6.1.8.2NoderadSPS3
1.3.6.1.4.1.164.6.1.8.3NoderadSPS6
1.3.6.1.4.1.164.6.1.8.4NoderadSPS9
1.3.6.1.4.1.164.6.1.8.5NoderadSPS12
1.3.6.1.4.1.164.6.1.8.6NoderadAPD2
1.3.6.1.4.1.164.6.1.8.7NoderadAPD8
1.3.6.1.4.1.164.6.1.8.8NoderadAPS8
1.3.6.1.4.1.164.6.1.8.9NoderadAPS16
1.3.6.1.4.1.164.6.1.8.10NoderadAPS24
1.3.6.1.4.1.164.6.1.8.11NoderadSPS3S
1.3.6.1.4.1.164.6.1.8.12NoderadFPS8
1.3.6.1.4.1.164.6.1.8.13NoderadFPS12
1.3.6.1.4.1.164.6.1.8.14NoderadSPS3ScSL
1.3.6.1.4.1.164.6.1.8.15NoderadSPS3Sc2S
1.3.6.1.4.1.164.6.1.8.16NoderadFPS8c
1.3.6.1.4.1.164.6.1.8.17NoderadFPS4
1.3.6.1.4.1.164.6.1.9NoderadSysEth
1.3.6.1.4.1.164.6.1.9.1NoderadEP8T
1.3.6.1.4.1.164.6.1.9.2NoderadEP4TAUI
1.3.6.1.4.1.164.6.1.9.3NoderadEP4T2FL
1.3.6.1.4.1.164.6.1.9.4NoderadEP4TFL
1.3.6.1.4.1.164.6.1.9.5NoderadEP4FL
1.3.6.1.4.1.164.6.1.9.7NoderadEPR8T
1.3.6.1.4.1.164.6.1.9.8NoderadEPR4TAUI
1.3.6.1.4.1.164.6.1.9.9NoderadEPR4T2FL
1.3.6.1.4.1.164.6.1.9.10NoderadEPR4TFL
1.3.6.1.4.1.164.6.1.9.11NoderadEPR4FL
1.3.6.1.4.1.164.6.1.11NoderadSysRtr
1.3.6.1.4.1.164.6.1.11.0IdentityradSysRtrEventscurrentThe events for RAD Router products.
1.3.6.1.4.1.164.6.1.11.1NoderadRTED
1.3.6.1.4.1.164.6.1.11.2NoderadRTEM
1.3.6.1.4.1.164.6.1.11.3NoderadRTEC
1.3.6.1.4.1.164.6.1.11.4NoderadWebRanger
1.3.6.1.4.1.164.6.1.11.5NoderadTinyRouter
1.3.6.1.4.1.164.6.1.11.6NoderadLA240
1.3.6.1.4.1.164.6.1.11.7NoderadSuperLan
1.3.6.1.4.1.164.6.1.11.8NoderadLA240I
1.3.6.1.4.1.164.6.1.11.9NoderadFcdIsdn
1.3.6.1.4.1.164.6.1.11.10NoderadEFcdIp
1.3.6.1.4.1.164.6.1.11.11NoderadFcdIpD
1.3.6.1.4.1.164.6.1.11.12NoderadFcdIpM
1.3.6.1.4.1.164.6.1.12NoderadSysAtm
1.3.6.1.4.1.164.6.1.12.0IdentityradSysAtmEventscurrentThe events for RAD ATM products.
1.3.6.1.4.1.164.6.1.12.0.6NotificationatmAceSystemTrapcurrentThis trap alerts of major problems in the device.
1.3.6.1.4.1.164.6.1.12.0.16NotificationatmAceAlarmLOScurrentThis trap indicates Loss Of Signal.
1.3.6.1.4.1.164.6.1.12.0.17NotificationatmAceAlarmLOFcurrentThis trap indicates Loss Of Frame.
1.3.6.1.4.1.164.6.1.12.0.18NotificationatmAceAlarmLCDcurrentThis trap indicates Loss of Cell Delineation.
1.3.6.1.4.1.164.6.1.12.0.19NotificationatmAceAlarmSLMcurrentThis trap indicates Signal Line Mismatch.
1.3.6.1.4.1.164.6.1.12.0.20NotificationatmAceAlarmLOPcurrentThis trap indicates Loss of Pointer.
1.3.6.1.4.1.164.6.1.12.0.21NotificationatmAceAlarmLineAIScurrentThis trap indicates Line AIS.
1.3.6.1.4.1.164.6.1.12.0.22NotificationatmAceAlarmPathAIScurrentThis trap indicates Path AIS.
1.3.6.1.4.1.164.6.1.12.0.23NotificationatmAceAlarmLineRDIcurrentThis trap indicates Line RDI.
1.3.6.1.4.1.164.6.1.12.0.24NotificationatmAceAlarmPathRDIcurrentThis trap indicates Path RDIand Path RAI(Yellow) for DS1 interfaces.
1.3.6.1.4.1.164.6.1.12.0.25NotificationatmAceAlarmSectionBIPcurrentThis trap indicates Section Bit Interleave Parity.
1.3.6.1.4.1.164.6.1.12.0.26NotificationatmAceAlarmLineBIPcurrentThis trap indicates Line Bit Interleave Parity.
1.3.6.1.4.1.164.6.1.12.0.27NotificationatmAceAlarmPathBIPcurrentThis trap indicates Path Bit Interleave Parity.
1.3.6.1.4.1.164.6.1.12.0.28NotificationatmAceAlarmLineFEBEcurrentThis trap indicates Line Far End Block Error.
1.3.6.1.4.1.164.6.1.12.0.29NotificationatmAceAlarmPathFEBEcurrentThis trap indicates Path Far End Block Error.
1.3.6.1.4.1.164.6.1.12.0.30NotificationatmAceAlarmPlcpLOFcurrentThis trap indicates T3 PLCP Loss Of Frame.
1.3.6.1.4.1.164.6.1.12.0.31NotificationatmAceAlarmPlcpYELLOWcurrentThis trap indicates T3 Plcp Yellow.
1.3.6.1.4.1.164.6.1.12.0.32NotificationatmAceAlarmPlcpBIPcurrentThis trap indicates T3 Plcp Bit Interleave Parity.
1.3.6.1.4.1.164.6.1.12.0.33NotificationatmAceAlarmPlcpFEBEcurrentThis trap indicates T3 Plcp Far End Block Error.
1.3.6.1.4.1.164.6.1.12.0.34NotificationatmAceAlarmPlcpP1P2currentThis trap indicates T3 Plcp Parity errors in P1/P2 bytes.
1.3.6.1.4.1.164.6.1.12.0.35NotificationatmAceAlarmUAScurrentThis trap is sent upon UAS start or end per port.
1.3.6.1.4.1.164.6.1.12.0.36NotificationatmAceAlarmClustercurrentThis trap is sent upon atmNteAlarmType start or end, for a cluster of VPs/VCs (according to atmNteLevel) with the same alarm on the same physical port. This tr…
1.3.6.1.4.1.164.6.1.12.0.40NotificationatmAceAlarmVpContinuityLosscurrentThis trap indicates Loss of Continuity Check on a VP Connection.
1.3.6.1.4.1.164.6.1.12.0.41NotificationatmAceAlarmVpAISReceptioncurrentThis trap indicates AIS Reception on a VP Connection.
1.3.6.1.4.1.164.6.1.12.0.42NotificationatmAceAlarmVpRDIReceptioncurrentThis trap indicates RDI Reception on a VP Connection.
1.3.6.1.4.1.164.6.1.12.0.43NotificationatmAceAlarmVpErroredCellscurrentThis trap indicates Errored Cells on a VP Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.44NotificationatmAceAlarmVpLostCellscurrentThis trap indicates Lost Cells on a VP Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.45NotificationatmAceAlarmVpMisinsertedCellscurrentThis trap indicates Misinserted Cells on a VP Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.46NotificationatmAceAlarmVpUAScurrentThis trap is sent upon UAS start or end per VP.
1.3.6.1.4.1.164.6.1.12.0.47NotificationatmAceAlarmVpLoopbackcurrentThis trap is sent upon OAM LoopBack fail status per VP.
1.3.6.1.4.1.164.6.1.12.0.48NotificationatmAceAlarmVpGCRAViolationcurrentThis trap indicates GCRA violation on a VP Connection reported by UPC device.
1.3.6.1.4.1.164.6.1.12.0.56NotificationatmAceAlarmVcContinuityLosscurrentThis trap indicates Loss of Continuity Check on a VC Connection.
1.3.6.1.4.1.164.6.1.12.0.57NotificationatmAceAlarmVcAISReceptioncurrentThis trap indicates AIS Reception on a VC.
1.3.6.1.4.1.164.6.1.12.0.58NotificationatmAceAlarmVcRDIReceptioncurrentThis trap indicates RDI Reception on a VC Connection.
1.3.6.1.4.1.164.6.1.12.0.59NotificationatmAceAlarmVcErroredCellscurrentThis trap indicates Errored Cells on a VC Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.60NotificationatmAceAlarmVcLostCellscurrentThis trap indicates Lost Cells on a VC Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.61NotificationatmAceAlarmVcMisinsertedCellscurrentThis trap indicates Misinserted Cells on a VC Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.62NotificationatmAceAlarmVcUnexpectedCellcurrentThis trap indicates an unexpected cell from user or network port.
1.3.6.1.4.1.164.6.1.12.0.63NotificationatmAceAlarmVcUAScurrentThis trap is sent upon UAS start or end per VC.
1.3.6.1.4.1.164.6.1.12.0.64NotificationatmAceAlarmVcLoopbackcurrentThis trap is sent upon OAM LoopBack fail status per VC.
1.3.6.1.4.1.164.6.1.12.0.65NotificationatmAceAlarmVcGCRAViolationcurrentThis trap indicates GCRA violation on a VC Connection reported by UPC device.
1.3.6.1.4.1.164.6.1.12.0.80NotificationatmImaGroupStatusChangeTrapcurrentThis trap indicates IMA Group status change.
1.3.6.1.4.1.164.6.1.12.1NoderadStarSwitch
1.3.6.1.4.1.164.6.1.12.1.1NoderadStarSwitchATM25
1.3.6.1.4.1.164.6.1.12.1.2NoderadStarSwitchATM25L
1.3.6.1.4.1.164.6.1.12.1.3NoderadStarSwitchATM155
1.3.6.1.4.1.164.6.1.12.2NoderadAtmCsuDsu
1.3.6.1.4.1.164.6.1.12.2.1NoderadAmcdE1
1.3.6.1.4.1.164.6.1.12.2.2NoderadAmcdT1
1.3.6.1.4.1.164.6.1.12.2.3NoderadAce20E
1.3.6.1.4.1.164.6.1.12.2.4NoderadAce20T
1.3.6.1.4.1.164.6.1.12.2.5NoderadAce2005
1.3.6.1.4.1.164.6.1.12.2.6NoderadAce2002
1.3.6.1.4.1.164.6.1.12.2.7NoderadAce2002E
1.3.6.1.4.1.164.6.1.12.2.8NoderadAce2E
1.3.6.1.4.1.164.6.1.12.2.9NoderadAce2T
1.3.6.1.4.1.164.6.1.12.2.10NoderadMlAtmE1
1.3.6.1.4.1.164.6.1.12.2.11NoderadMlAtmT1
1.3.6.1.4.1.164.6.1.12.2.12NoderadAmc102
1.3.6.1.4.1.164.6.1.12.2.13NoderadAmc102c
1.3.6.1.4.1.164.6.1.12.2.14NoderadAce202
1.3.6.1.4.1.164.6.1.12.3NoderadAce
1.3.6.1.4.1.164.6.1.12.3.1NoderadAce101
1.3.6.1.4.1.164.6.1.12.3.2NoderadAce102
1.3.6.1.4.1.164.6.1.12.3.3NoderadAce50
1.3.6.1.4.1.164.6.1.13NoderadSysLA
1.3.6.1.4.1.164.6.1.13.1NoderadLA140
1.3.6.1.4.1.164.6.1.13.2NoderadLA110
1.3.6.1.4.1.164.6.2Nodeagnt
1.3.6.1.4.1.164.6.2.1ScalaragnHwVersionread-writecurrentASCII string for description and display of the agent hardware version, as it is known by the agent software.The user can update the version upon request when …
1.3.6.1.4.1.164.6.2.2ScalaragnTrapMaskread-writecurrentThe value of this attribute determines the type of traps the agent should mask and not send to the management console. The value is differently determined for …
1.3.6.1.4.1.164.6.2.3ScalaragnTrapValueread-onlydeprecatedThe value of the trap decoded in internal RAD format. Full description is given in the Trap definition file
1.3.6.1.4.1.164.6.2.4ScalaragnChangeCntread-onlycurrentThe number of changes in system configuration that were reported to the manager since last cold start
1.3.6.1.4.1.164.6.2.5ScalaragnSpecificread-onlycurrentObject identifier of entity containing additional information regarding this instance.
1.3.6.1.4.1.164.6.2.6ScalaragnConfigMsgread-onlycurrentFull configuration message coded in internal RAD application format. This entry describes agent's configuration. For MP-2200 R3, this object describes agent's …
1.3.6.1.4.1.164.6.2.7TablemngTrapIpTablenot-accessiblecurrentThis table indicates the destination address of the traps. Internally it will be limited to ten addresses.
1.3.6.1.4.1.164.6.2.7.1RowmngEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.7.1.1ColumnmngIDread-onlycurrentThis value indicates an index of a specific IP address
1.3.6.1.4.1.164.6.2.7.1.2ColumnmngIPread-writecurrentThis value indicates the destination address of the traps. IP 0.0.0.0 removes the entry.
1.3.6.1.4.1.164.6.2.7.1.3ColumnmngIPMaskread-writedeprecatedThis value indicates the mask of the destination addresses of the traps.
1.3.6.1.4.1.164.6.2.7.1.4ColumnmngTrapMaskread-writecurrentThe value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different prod…
1.3.6.1.4.1.164.6.2.8ScalaragnIndicationread-onlycurrentAttribute describing the state of the entity the agent is responsible for. In case of a modular entity, the value of this attribute will be according to the co…
1.3.6.1.4.1.164.6.2.9ScalaragnMonitorModeCmdread-writecurrentSetting this attribute to ON, will enforce the agent to change its mode of operation to Monitor Mode
1.3.6.1.4.1.164.6.2.10ScalaragnLedread-onlycurrentThis entry specifies the LEDs status of the agent module . Each led will be represented by 4 bits where the first 2 bits (left) will specify the status : (00=N…
1.3.6.1.4.1.164.6.2.11TabletrapTablenot-accessiblecurrentThis table includes the last few traps generated by the agent, for future retrieval. The table has a limited capacity. If traps are not retrieved in proper tim…
1.3.6.1.4.1.164.6.2.11.1RowtrapEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.11.1.1ColumntrapIDread-onlycurrentThis value indicates an index of a specific trap
1.3.6.1.4.1.164.6.2.11.1.2ColumntrapValread-onlycurrentThis value is the actual ASCII description of the trap.
1.3.6.1.4.1.164.6.2.11.1.3ColumntrapTimeSinceOccurrenceread-onlycurrentThis value indicates the amount of time passed since the occurrence of the event that trigger this trap.
1.3.6.1.4.1.164.6.2.12NodefileTransfer
1.3.6.1.4.1.164.6.2.12.1ScalarfileServerIPread-writecurrentThe IP address of the server from which the file is loaded
1.3.6.1.4.1.164.6.2.12.2ScalarfileNameread-writecurrentThe name of the file to be loaded. For protection, read returns NULL.
1.3.6.1.4.1.164.6.2.12.3ScalarfileTransCmdread-writecurrentThe command to be executed on fileName at fileServerIP.
1.3.6.1.4.1.164.6.2.12.4ScalartftpRetryTimeOutread-writecurrentGeneral Retransmission time-out value (seconds)
1.3.6.1.4.1.164.6.2.12.5ScalartftpTotalTimeOutread-writecurrentTotal Retransmission time-out value (seconds)
1.3.6.1.4.1.164.6.2.12.6ScalartftpStatusread-writecurrentStatus of tftp session. When a session ended with success, the tftpStatus should be endedOk(6). Before restarting a tftp session, the NMS should set the tftpSt…
1.3.6.1.4.1.164.6.2.12.7ScalartftpErrorread-onlycurrentThe MSB represents the standard error code. The LSB represents the private error code. 0x0000 is No Error 0x0100 is File Not Found 0x0400 is Illegal TFTP opera…
1.3.6.1.4.1.164.6.2.12.8ScalarfileTransferToSubSystemsread-writecurrentThis object represents the sub-systems the fileTransCmd refers to. It should be used when a system is divided to sub-systems and each sub-system (or part of th…
1.3.6.1.4.1.164.6.2.12.9ScalarfileNameWithinProductread-writecurrentThe file name used by the product within the product file system.
1.3.6.1.4.1.164.6.2.12.10TableintSwdlTablenot-accessiblecurrentThis parameters table is for internal Software down load. It also includes data about all files contained in the Object from which down-load is performed.
1.3.6.1.4.1.164.6.2.12.10.1RowintSwdlEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.12.10.1.1ColumnintSwdlObjIdxread-onlycurrentThe index of the object from which down-load is performed.
1.3.6.1.4.1.164.6.2.12.10.1.2ColumnintSwdlFileIdxread-onlycurrentThe index of the files included in intSwdlObjIdx. One of these files can be selected to be internally downloaded.
1.3.6.1.4.1.164.6.2.12.10.1.3ColumnintSwdlFileNameread-onlycurrentThe name of the file.
1.3.6.1.4.1.164.6.2.12.10.1.4ColumnintSwdlFileSwVerread-onlycurrentThe software version of the file.
1.3.6.1.4.1.164.6.2.12.10.1.5ColumnintSwdlSwDateread-onlycurrentThe software version date of the file.
1.3.6.1.4.1.164.6.2.12.10.1.6ColumnintSwdlSizeread-onlycurrentThe size of the file.
1.3.6.1.4.1.164.6.2.12.10.1.7ColumnintSwdlCmdread-writecurrentThe command to down-load a SW file to an object. The Agent will change the value of this MIB object to off(2) automatically, after accepting the command.
1.3.6.1.4.1.164.6.2.12.10.1.8ColumnintSwdlToSubSystemread-writecurrentThis object defines the subsystem for download. Bit='1'- APPLY to respective sub system. Bit='0'- DO NOT APPLY to respective sub system. For more details see p…
1.3.6.1.4.1.164.6.2.12.11TableswdlStatusTablenot-accessiblecurrentThis parameters table is for software download status. It also includes data about the files down-loaded or attempted to be down-loaded.
1.3.6.1.4.1.164.6.2.12.11.1RowswdlStatusEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.12.11.1.1ColumnswdlStatusTypeIdxread-onlycurrentThe index of the down-load type (e.g. external (1) or internal (2)).
1.3.6.1.4.1.164.6.2.12.11.1.2ColumnswdlStatusIdxread-onlycurrentThe index of the status rows.
1.3.6.1.4.1.164.6.2.12.11.1.3ColumnswdlStatusFileNameread-onlycurrentThe name of the file.
1.3.6.1.4.1.164.6.2.12.11.1.4ColumnswdlStatusSlotread-onlycurrentThe slot of the updated (or attempted to be updated) object.
1.3.6.1.4.1.164.6.2.12.11.1.5ColumnswdlStatusSubSystemread-onlycurrentThe subsystem that updated (or attempted to be updated).
1.3.6.1.4.1.164.6.2.12.11.1.6ColumnswdlStatusStatusread-onlycurrentThe status of the down load process. Value: Fail (2), OK (3), InProcess (4).
1.3.6.1.4.1.164.6.2.12.11.1.7ColumnswdlStatusTimeread-onlycurrentThis MIB parameter indicates the time SW download was finished. The format shuld be YYYY-MM-DD, hh:mm:ss
1.3.6.1.4.1.164.6.2.12.12ScalarclearDwldStatusLogread-writecurrentThis object clears the status log. Value: off(2), external(3), internal(4) The Agent will change the value of this MIB object to off(2) automatically, after ac…
1.3.6.1.4.1.164.6.2.13ScalarsystemResetread-writecurrentReset action to be performed on the system.
1.3.6.1.4.1.164.6.2.14NodesystemTiming
1.3.6.1.4.1.164.6.2.14.1ScalarsystemDateread-writecurrentSystem date.
1.3.6.1.4.1.164.6.2.14.2ScalarsystemTimeread-writecurrentSystem time.
1.3.6.1.4.1.164.6.2.15NodesystemPort
1.3.6.1.4.1.164.6.2.15.1TablephysicalConnectorTablenot-accessiblecurrentThis table includes the connector type of ports or interfaces.
1.3.6.1.4.1.164.6.2.15.1.1RowphysicalConnectorEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.1.1.1ColumnportIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.1.1.2ColumnphysicalConnectorread-onlycurrentThe connector of the port/interface. other - none of the specified connectors none - no connector.
1.3.6.1.4.1.164.6.2.15.1.1.3ColumnportOptWaveLengthread-onlycurrentWave Length of an Optical interface/port in [nm] and specification if Laser or not. notApplicable - for non-optical ports.
1.3.6.1.4.1.164.6.2.15.1.1.4ColumnportOptModeread-onlycurrentLaser Mode of an Optical Laser interface/port. notApplicable - for non-Laser ports.
1.3.6.1.4.1.164.6.2.15.2NodeprtSupervisory
1.3.6.1.4.1.164.6.2.15.2.1TableprtSpTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.6.2.15.2.1.1RowprtSpEntrynot-accessiblecurrentSupervisory port parameter table.
1.3.6.1.4.1.164.6.2.15.2.1.1.1ColumnprtSupervisoryIndexread-onlycurrentThe SP port index. The LS byte of the integer is the port index 1..255. The MS byte is different than 0 only if the port belongs to a module. In that case it i…
1.3.6.1.4.1.164.6.2.15.2.1.1.2ColumnprtSupervisoryRateread-writecurrentThis attribute indicates the operation rate (speed) of the port. auto - automatic rate selection, by the agent.
1.3.6.1.4.1.164.6.2.15.2.1.1.3ColumnprtSupervisoryDataBitsread-writecurrentThis attribute indicates the number of data bits in an async frame
1.3.6.1.4.1.164.6.2.15.2.1.1.4ColumnprtSupervisoryParityread-writecurrentThis attribute indicates the parity mode in an async frame
1.3.6.1.4.1.164.6.2.15.2.1.1.5ColumnprtSupervisoryStopBitsread-onlycurrentThis attribute indicates the parity mode in an async frame.
1.3.6.1.4.1.164.6.2.15.2.1.1.6ColumnprtSupervisoryUsageread-writecurrentThis attribute indicates the usage of the SP port.
1.3.6.1.4.1.164.6.2.15.2.1.1.7ColumnprtSupervisoryInterfaceread-writecurrentThis attribute indicates the supervisory port interface.
1.3.6.1.4.1.164.6.2.15.2.1.1.8ColumnprtSupervisoryCTSread-writecurrentCTS line state.
1.3.6.1.4.1.164.6.2.15.2.1.1.9ColumnprtSupervisoryDcdDelayread-writecurrentDCD delay in msec.
1.3.6.1.4.1.164.6.2.15.2.1.1.10ColumnprtSupervisoryDSRread-writecurrentDSR line state.
1.3.6.1.4.1.164.6.2.15.2.1.1.11ColumnprtSupervisoryRoutProtocolread-writecurrentThis attribute indicates the routing protocol of the port. notApplicable - for DP.
1.3.6.1.4.1.164.6.2.15.3NodeprtPerformance
1.3.6.1.4.1.164.6.2.15.3.1TableprtPerfTablenot-accessiblecurrentThis table includes G.826 ports or interfaces.
1.3.6.1.4.1.164.6.2.15.3.1.1RowprtPerfEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.3.1.1.1ColumnprtPerfIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.3.1.1.2ColumnprtPerfPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last prtPerfSaveAndResetCmd received…
1.3.6.1.4.1.164.6.2.15.3.1.1.3ColumnprtPerfElapsedTimeread-onlycurrentElapsed Time in seconds. - for prtPerfPeriodRef=currentPeriod: The period since last prtPerfSaveAndResetCmd received or since Start-up (if no prtPerfSaveAndRes…
1.3.6.1.4.1.164.6.2.15.3.1.1.4ColumnprtPerfUASread-onlycurrentNumber of Unavailable Seconds for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.5ColumnprtPerfESread-onlycurrentNumber of Errored Seconds for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.6ColumnprtPerfSESread-onlycurrentNumber of Severely Errored Seconds for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.7ColumnprtPerfBBEread-onlycurrentNumber of Background Block (or Frame) Errors for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.8ColumnprtPerfBlocksPerSecread-onlycurrentBlocks per second (or frames per second) of the port/interface indicated by portIdx. This object is constant for a certain port/interface. It is not affected b…
1.3.6.1.4.1.164.6.2.15.3.1.1.9ColumnprtPerfTimeTagread-onlycurrentTime Tag of Last Period: sysUpTime when last prtPerfSaveAndResetCmd was executed. This object is applicable only for prtPerfPeriodRef=lastPeriod. For prtPerfPe…
1.3.6.1.4.1.164.6.2.15.3.1.1.10ColumnprtPerfSaveAndResetCmdread-writecurrentA command per port/interface, to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. This object is applica…
1.3.6.1.4.1.164.6.2.15.4NodeprtTest
1.3.6.1.4.1.164.6.2.15.4.1TableprtTestTablenot-accessiblecurrentThis table includes test data for ports or interfaces.
1.3.6.1.4.1.164.6.2.15.4.1.1RowprtTestEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.4.1.1.1ColumnprtTestIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.4.1.1.2ColumnprtTestCmdAndStatusread-writecurrentSetting this object to a value as detailed further on (except 0) will initiate a test on the specific port. The test/s requested will be set according to the r…
1.3.6.1.4.1.164.6.2.15.4.1.1.3ColumnprtBertCounterread-onlycurrentThis object indicates the number of BERT errors encountered during the BERT operation. It is valid only when BERT (Bit Error Rate Test) is active on the specif…
1.3.6.1.4.1.164.6.2.15.4.1.1.4ColumnprtTestInitiatorread-onlycurrentThis object indicates who initiated this port's test/s.
1.3.6.1.4.1.164.6.2.15.5NodeprtParam
1.3.6.1.4.1.164.6.2.15.5.1TableprtParamTablenot-accessiblecurrentThis table includes general port parameters. The meaning is different for every product that supports it due to a general parameter - prtControlCnfg. For ACE20…
1.3.6.1.4.1.164.6.2.15.5.1.1RowprtParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.5.1.1.1ColumnprtParamIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.5.1.1.2ColumnprtControlCnfgread-writecurrentThis object may be used for port RW general parameter/s. For detailed meaning, see product's spec. Supported by: PRBi-E3/T3. For ACE2002: This parameter will i…
1.3.6.1.4.1.164.6.2.15.5.1.1.3ColumnprtParamClkSrcread-writecurrentThe source of Transmit Clock. 'loopTiming' or 'loopback' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' or 'internal' …
1.3.6.1.4.1.164.6.2.15.5.1.1.4ColumnprtParamPhantomread-writecurrentPower feeding to another device.
1.3.6.1.4.1.164.6.2.15.5.1.1.5ColumnprtParamResetStatsCmdread-writecurrentReset statistics of the selected port.
1.3.6.1.4.1.164.6.2.15.5.1.1.6ColumnprtParamLastResetStatsTimeread-onlycurrentThe value of MIB II's sysUpTime object at the last time that prtParamResetStatsCmd was Set to on(3) for this port. If prtParamResetStatsCmd was never Set to on…
1.3.6.1.4.1.164.6.2.15.6NodeprtIP
1.3.6.1.4.1.164.6.2.15.6.1TableprtIpParamTablenot-accessiblecurrentA table - Parameters for IP Ports.
1.3.6.1.4.1.164.6.2.15.6.1.1RowprtIpParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.6.1.1.1ColumnprtIpParamConfigIdxread-onlycurrentThis object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). For products having Agent and Edit configuratio…
1.3.6.1.4.1.164.6.2.15.6.1.1.2ColumnprtIpParamSlotIdxread-onlycurrentThis object indicates a unique number of the slot position in which the module is inserted. notApplicable = 255 (for products that don't have slots). For KM: k…
1.3.6.1.4.1.164.6.2.15.6.1.1.3ColumnprtIpParamIdxread-onlycurrentThis object indicates a unique Port Index.
1.3.6.1.4.1.164.6.2.15.6.1.1.4ColumnprtIpParamHostIPread-writecurrentThe host interface IP address.
1.3.6.1.4.1.164.6.2.15.6.1.1.5ColumnprtIpParamHostMaskread-writecurrentThe host interface subnet mask.
1.3.6.1.4.1.164.6.2.15.6.1.1.6ColumnprtIpParamDefaultGatewayread-writecurrentDefault Gateway's IP Address.
1.3.6.1.4.1.164.6.2.15.6.1.1.7ColumnprtIpParamMediaModeread-onlycurrentThis object indicates the real Media Mode.
1.3.6.1.4.1.164.6.2.15.6.1.1.8ColumnprtIpParamMediaRateread-onlycurrentThis object indicates the real Media Rate (Mbps).
1.3.6.1.4.1.164.6.2.15.6.1.1.9ColumnprtIpParamMngVlanSupportread-writecurrentManagement VLAN support (Tagging). no - No support of VLAN Tagging. yes - 4 VLAN bytes will be added to the frame.
1.3.6.1.4.1.164.6.2.15.6.1.1.10ColumnprtIpParamMngVlanIdread-writecurrentManagement VLAN ID.
1.3.6.1.4.1.164.6.2.15.6.1.1.11ColumnprtIpParamMngVlanPriorityread-writecurrentManagement VLAN Frame priority.
1.3.6.1.4.1.164.6.2.15.6.1.1.12ColumnprtIpParamRingModeread-writecurrentThis object indicates If Ring Mode is enabled or not.
1.3.6.1.4.1.164.6.2.16ScalarsystemResetAllStatsCmdread-writecurrentReset statistics of all ports and connections of the device.
1.3.6.1.4.1.164.6.2.17ScalarsystemClearTablesCmdread-writecurrenttempCnfgTables - Set *RowStatus = destroy for all entries of some tables having *RowStatus object, for temporary configuration only! (255). For the relevant ta…
1.3.6.1.4.1.164.6.2.18ScalarsystemParameterread-writecurrentThis parameter can be used for different purposes: - TELNET session time-out in seconds. - Ace20: when trying to create row in a table that already has row wit…
1.3.6.1.4.1.164.6.2.19ScalaragnGlobalAlarmMaskread-writecurrentThe value of this attribute determines the alarm traps the agent should mask and not send to the managers. Each bit from a certain octet represents a certain a…
1.3.6.1.4.1.164.6.2.20ScalaralarmSeverityread-onlycurrentThis object specifies the severity of the alarms.
1.3.6.1.4.1.164.6.2.21ScalaralarmStateread-onlycurrent.
1.3.6.1.4.1.164.6.2.22ScalaragnTestStatusread-onlycurrentIndicates the current test status (for all levels: system, card, port). This attribute will be set to: on(3): when there is at least one test in progress on th…
1.3.6.1.4.1.164.6.2.23ScalarsystemSaveAndResetAllStatsCmdread-writecurrenton - a command to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. off - agent will automatically change…
1.3.6.1.4.1.164.6.2.24ScalarsystemDefaultGatewayread-writecurrentDefault Gateway's IP Address.
1.3.6.1.4.1.164.6.2.25TablesystemPsTablenot-accessiblecurrentThis table describes the PS types of a device. Usage of this table is specified in the device's NMS SRS
1.3.6.1.4.1.164.6.2.25.1RowsystemPsEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.25.1.1ColumnsystemPsIndex1read-onlycurrentFirst Index. In HUBs: 1 = PS-A slot 2 = PS-B slot. In SA units: 1 = PS1 2 = PS2 Default = 1
1.3.6.1.4.1.164.6.2.25.1.2ColumnsystemPsIndex2read-onlycurrentSecond Index. In HUBs: 1 always. In SA units: 1 = Local 2 = Remote Default = 1.
1.3.6.1.4.1.164.6.2.25.1.3ColumnsystemPsTyperead-onlycurrentThe type of PS, for a stand-alone product. acDc - AC with rj45 DC. acPF - Power Feeding (phantom) box that is feeding another box by external AC. dcPF - Power …
1.3.6.1.4.1.164.6.2.25.1.4ColumnsystemPsStatusread-onlycurrentThe Status of the PS unit.
1.3.6.1.4.1.164.6.2.30ScalarxcIndexNextread-onlycurrentThis object contains an appropriate value to be used for xcIndex when creating entries in the xcTable. The value 0 indicates that no unassigned entries are ava…
1.3.6.1.4.1.164.6.2.31TablexcTablenot-accessiblecurrentConfiguration of system cross-connect entries. The table follows the behavior described in RFC 2515, RFC 1604 regarding the creation deletion and modification …
1.3.6.1.4.1.164.6.2.31.1RowxcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.31.1.1ColumnxcIndexnot-accessiblecurrentCross Connect Identifier.
1.3.6.1.4.1.164.6.2.31.1.2ColumnxcIfIndex1not-accessiblecurrentThe interface Index from the ifTable, which identify one side of the connection.
1.3.6.1.4.1.164.6.2.31.1.3ColumnxcVpiread-createcurrent.
1.3.6.1.4.1.164.6.2.31.1.4ColumnxcVciread-createcurrent.
1.3.6.1.4.1.164.6.2.31.1.5ColumnxcIfIndex2read-createcurrentThe interface Index from the ifTable, which identifies the other side of the connection.
1.3.6.1.4.1.164.6.2.31.1.6ColumnxcRowStatusread-createcurrentThis parameter allows NMS to create/delete entries of this table.
1.3.6.1.4.1.164.6.2.31.1.7ColumnxcDescrread-createcurrentA textual string containing information about the xc entry.
1.3.6.1.4.1.164.6.2.31.1.8ColumnxcAdminStatusread-createcurrentThe desired administrative status of this bi-directional cross-connect.
1.3.6.1.4.1.164.6.2.31.1.9ColumnxcOperStatusread-onlycurrentThe operational status of this bi-directional cross-connect.
1.3.6.1.4.1.164.6.2.32NodesystemModule
1.3.6.1.4.1.164.6.2.32.1NodemodlParam
1.3.6.1.4.1.164.6.2.32.1.1TablemodlParamTablenot-accessiblecurrentThis table include parameters for system modules.
1.3.6.1.4.1.164.6.2.32.1.1.1RowmodlParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.32.1.1.1.1ColumnmodlParamIndexread-onlycurrentThe module index.
1.3.6.1.4.1.164.6.2.32.1.1.1.2ColumnmodlParamResetread-writecurrentReset action to be performed on the module. Set the parameter will be done always to on(3) or factory (4). After performing the Reset operation, Agent will aut…
1.3.6.1.4.1.164.6.2.32.1.1.1.3ColumnmodlParamSwdlStatusread-onlycurrentThis parameter indicates whatever the swdl is in process or not.
1.3.6.1.4.1.164.6.2.33ScalaragnNearFarConnectionread-onlycurrentThis parameter describes the connection between near-end and far-end agents.
1.3.6.1.4.1.164.7NoderadStkHub
1.3.6.1.4.1.164.11NoderadRouter
1.3.6.1.4.1.164.11.7NodertrBridge
1.3.6.1.4.1.164.11.7.3NodeipRouter
1.3.6.1.4.1.164.11.7.3.1TablertrIfIpTablenot-accessiblecurrentRouter interfaces table.
1.3.6.1.4.1.164.11.7.3.1.1RowrtrIfIpEntrynot-accessiblecurrentAn entry in table rtrIfIpTable.
1.3.6.1.4.1.164.11.7.3.1.1.1ColumnrtrIfIpread-createcurrentIP Address.
1.3.6.1.4.1.164.11.7.3.1.1.2ColumnrtrIfRowStatusread-createcurrent.
1.3.6.1.4.1.164.11.7.3.1.1.3ColumnrtrIfIpMaskread-createcurrentIP mask Address.
1.3.6.1.4.1.164.11.7.3.1.1.4ColumnrtrIfIndexread-createcurrentThe ifIndex connection, on which the IP is determined.
1.3.6.1.4.1.164.11.7.3.1.1.5ColumnrtrIfMngread-createcurrentAn IP interface might be determined as a management connection (under the product limitations).
1.3.6.1.4.1.164.11.7.3.2TablebrtrIfTablenot-accessiblecurrentLAN interface table.
1.3.6.1.4.1.164.11.7.3.2.1RowbrtrIfEntrynot-accessiblecurrentThe entries of this table will be created by agent .
1.3.6.1.4.1.164.11.7.3.2.1.1ColumnbrtrIfIndexread-onlycurrentThe index of the interface (LAN or ATM).
1.3.6.1.4.1.164.11.7.3.2.1.2ColumnbrtrIfModeread-writecurrentConnection Mode.
1.3.6.1.4.1.164.11.7.3.2.1.3ColumnbrtrIfMaxFrameSizeread-writecurrentFrame Max Size.
1.3.6.1.4.1.164.11.7.3.3ScalarrtrArpAgingTimeread-writecurrentARP Aging Time. Applicable for a Router Mode and for a Brouter Mode.
1.3.6.1.4.1.164.11.7.3.4TablebrtrLanIfTablenot-accessiblecurrentLAN interface table.
1.3.6.1.4.1.164.11.7.3.4.1RowbrtrLanIfEntrynot-accessiblecurrentThe entries of this table will be created by agent .
1.3.6.1.4.1.164.11.7.3.4.1.1ColumnbrtrLanIfIndexread-onlycurrentThe index of the LAN entity (physical interface).
1.3.6.1.4.1.164.11.7.3.4.1.2ColumnbrtrLanIpAddressread-writecurrentHost IP address. Applicable for bridge mode connection only.
1.3.6.1.4.1.164.11.7.3.4.1.3ColumnbrtrLanIpMaskread-writecurrentHost IP Mask. Applicable for bridge mode connection only.
1.3.6.1.4.1.164.11.7.3.4.1.4ColumnbrtrLanMaxRateEnableread-onlycurrentThis parameter determines the HW ability of the LAN card according to HW.
1.3.6.1.4.1.164.11.7.3.4.1.5ColumnbrtrLanMaxRateread-writecurrentMax Rate.
1.3.6.1.4.1.164.11.7.3.4.1.6ColumnbrtrLanMngread-writecurrentAn IP interface might be determined as a management connection (under the product limitations).
1.3.6.1.4.1.164.11.7.3.4.1.7ColumnbrtrLanDefaultRouterread-writecurrentDefault Router's (Gateway's) IP Address. For each LAN interface there may be a different Default Router.
1.3.6.1.4.1.164.11.7.3.5TablertrIsdnIfTablenot-accessiblecurrentThis table contains ISDN parameters that do not appear in the standard MIBs.
1.3.6.1.4.1.164.11.7.3.5.1RowrtrIsdnIfEntrynot-accessiblecurrentEntries for ISDN parameters that do not appear in the standard MIBs.
1.3.6.1.4.1.164.11.7.3.5.1.1ColumnrtrIsdnIfMinNumBchansread-createcurrentMinimum number of B channels that the ISDN Dialer of the router will use for Dialing out. This parameter will be used for the BOD (Bandwidth On Demand) feature…
1.3.6.1.4.1.164.11.7.3.5.1.2ColumnrtrIsdnIfMaxNumBchansread-createcurrentMaximum number of B channels that the ISDN Dialer of the router will use for Dialing out. This parameter will be used for the BOD (Bandwidth On Demand) feature…
1.3.6.1.4.1.164.11.7.3.6TablertrLcrTablenot-accessiblecurrentLeast Cost Routing Table. The user will be able to set a prefix for an outgoing number that arrives with a predefined prefix in order to redirect the number fo…
1.3.6.1.4.1.164.11.7.3.6.1RowrtrLcrEntrynot-accessiblecurrentLeast Cost Routing Entry.
1.3.6.1.4.1.164.11.7.3.6.1.1ColumnrtrLcrOutIfIndexnot-accessiblecurrentThe outgoing interface Number of the current route. The incoming interface number is the value of ifIndex.
1.3.6.1.4.1.164.11.7.3.6.1.2ColumnrtrLcrRowStatusread-createcurrentRow Status for adding/destroying rows.
1.3.6.1.4.1.164.11.7.3.6.1.3ColumnrtrLcrInPrefixread-createcurrentThis prefix is part of the called number existing in the incoming packet.
1.3.6.1.4.1.164.11.7.3.6.1.4ColumnrtrLcrOutPrefixread-createcurrentThis prefix will be inserted into the outgoing packet.
1.3.6.1.4.1.164.11.8NodemulticastGen
1.3.6.1.4.1.164.11.8.1ScalarmulticastModeread-writecurrentAccording to this mode the packets will be forwarded. If disable (2) is selected, there will be no multicast.
1.3.6.1.4.1.164.12NoderadAtm
1.3.6.1.4.1.164.12.2NodeatmGen
1.3.6.1.4.1.164.12.2.1NodeatmPerfHistory
1.3.6.1.4.1.164.12.2.1.1NodeatmIfPerformance
1.3.6.1.4.1.164.12.2.1.1.1TableatmIfDataTablenot-accessiblecurrentThe ATM interface Data table.
1.3.6.1.4.1.164.12.2.1.1.1.1RowatmIfDataEntrynot-accessiblecurrentAn entry in the ATM interface Data table.
1.3.6.1.4.1.164.12.2.1.1.1.1.1ColumnatmIfTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the near end current error- measurement period.
1.3.6.1.4.1.164.12.2.1.1.1.1.2ColumnatmIfValidIntervalsread-onlycurrentThe number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 h…
1.3.6.1.4.1.164.12.2.1.1.2TableatmIfCurrentTablenot-accessiblecurrentThe ATM interface Current table.
1.3.6.1.4.1.164.12.2.1.1.2.1RowatmIfCurrentEntrynot-accessiblecurrentAn entry in the ATM interface Current table.
1.3.6.1.4.1.164.12.2.1.1.2.1.1ColumnatmIfCurrentTxCellsread-onlycurrentThe counter associated with the number of transmitted cells, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.2.1.2ColumnatmIfCurrentRxCellsread-onlycurrentThe counter associated with the number of received cells, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.2.1.3ColumnatmIfCurrentCorrectedHecsread-onlycurrentThe counter associated with the number of cells with corrected HEC errors, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.2.1.4ColumnatmIfCurrentUncorrectedHecsread-onlycurrentThe counter associated with the number of cells with uncorrected HEC errors, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.3TableatmIfIntervalTablenot-accessiblecurrentThe ATM interface Interval table.
1.3.6.1.4.1.164.12.2.1.1.3.1RowatmIfIntervalEntrynot-accessiblecurrentAn entry in the ATM interface Interval table.
1.3.6.1.4.1.164.12.2.1.1.3.1.1ColumnatmIfIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.1.3.1.2ColumnatmIfIntervalTxCellsread-onlycurrentThe counter associated with the number of transmitted cells , encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.1.3.1.3ColumnatmIfIntervalRxCellsread-onlycurrentThe counter associated with the number of received cells, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.1.3.1.4ColumnatmIfIntervalCorrectedHecsread-onlycurrentThe counter associated with the number of cells with corrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, int…
1.3.6.1.4.1.164.12.2.1.1.3.1.5ColumnatmIfIntervalUncorrectedHecsread-onlycurrentThe counter associated with the number of cells with uncorrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, i…
1.3.6.1.4.1.164.12.2.1.1.4Tableaal5VccXTablenot-accessiblecurrentThis table is an extension to AAL5 VCC Table.
1.3.6.1.4.1.164.12.2.1.1.4.1Rowaal5VccXEntrynot-accessiblecurrentThis list contains the additional AAL5 VCC performance parameters and is indexed by ifIndex values of AAL5 interfaces and the associated VPI/VCI values.
1.3.6.1.4.1.164.12.2.1.1.4.1.1Columnaal5VccInFramesread-onlycurrentThe number of frames received via this interface.
1.3.6.1.4.1.164.12.2.1.1.4.1.2Columnaal5VccOutFramesread-onlycurrentThe total number of frames transmitted out of the interface.
1.3.6.1.4.1.164.12.2.1.1.4.1.3Columnaal5VccUnknownProtocolFramesread-onlycurrentThe number of frames that were discarded due to unsupported protocol encapsulation on this VCC.
1.3.6.1.4.1.164.12.2.1.2NodeatmPvcPerformance
1.3.6.1.4.1.164.12.2.1.2.1NodeatmVpPerformance
1.3.6.1.4.1.164.12.2.1.2.1.1TableatmVpCurrentTablenot-accessiblecurrentThe ATM VP Current table.
1.3.6.1.4.1.164.12.2.1.2.1.1.1RowatmVpCurrentEntrynot-accessiblecurrentAn entry in the ATM VP Current table.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.1ColumnatmVpCurrentVpiread-onlycurrentThe VPI of the VPL.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.2ColumnatmVpCurrentRxCellsClp01read-onlycurrentThe counter associated with the number of transmitted cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.3ColumnatmVpCurrentRxCellsClp0read-onlycurrentThe counter associated with the number of received cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.4ColumnatmVpCurrentGcra0Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA0, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.5ColumnatmVpCurrentGcra1Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA1, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.6ColumnatmVpCurrentRxAISread-onlycurrentThe counter associated with the number of received AIS cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.7ColumnatmVpCurrentTxAISread-onlycurrentThe counter associated with the number of transmitted AIS cells, encountered by the VPL of this ATM interface in the current 15 minute interval. Not Supported …
1.3.6.1.4.1.164.12.2.1.2.1.1.1.8ColumnatmVpCurrentRxRDIread-onlycurrentThe counter associated with the number of received RDI cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.9ColumnatmVpCurrentTxRDIread-onlycurrentThe counter associated with the number of transmitted RDI cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.10ColumnatmVpCurrentContinuityLossread-onlycurrentThe counter associated with the number of loss of continuity cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.11ColumnatmVpCurrentUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.12ColumnatmVpCurrentSESread-onlycurrentThe counter associated with the number of Severerly Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.13ColumnatmVpCurrentCDCread-onlycurrentAmount of cells dropped in the current 15 minute interval of the VP connection.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.14ColumnatmVpCurrentTotalDiscardsread-onlycurrentThe total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.15ColumnatmVpCurrentClp0Discardsread-onlycurrentThe total number of valid ATM cells received with CLP=0 and discarded by the traffic policing entity.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.16ColumnatmVpCurrentTotalCellOutsread-onlycurrentThe total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.17ColumnatmVpCurrentClp0CellOutsread-onlycurrentThe total number of valid ATM cells transmitted with CLP=0 by this VPL.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.18ColumnatmVpCurrentTaggedOutsread-onlycurrentThe total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.19ColumnatmVpCurrentPCRread-onlycurrentThe maximum traffic rate encountered in the last interval of the VP connection (monitored once a second).
1.3.6.1.4.1.164.12.2.1.2.1.1.1.20ColumnatmVpCurrentSCRread-onlycurrentThe average traffic rate during the last interval of the VP connection.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.21ColumnatmVpCurrentMCRread-onlycurrentMCR - The minimum traffic rate encountered in the last interval of the VP connection (monitored once a second).
1.3.6.1.4.1.164.12.2.1.2.1.2TableatmVpPMCurrentTablenot-accessiblecurrentThe ATM VP Current table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.1.2.1RowatmVpPMCurrentEntrynot-accessiblecurrentAn entry in the ATM VP Current table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.1ColumnatmVpPMCurrentVpiread-onlycurrentThe VPI of the VPL.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.2ColumnatmVpPMCurrentDirread-onlycurrentThe direction of performance management.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.3ColumnatmVpPMCurrentTxClp01read-onlycurrentThe counter associated with the number of transmitted CLP 0+1 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.4ColumnatmVpPMCurrentTxClp0read-onlycurrentThe counter associated with the number of transmitted CLP 0 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.5ColumnatmVpPMCurrentRxClp01read-onlycurrentThe counter associated with the number of received CLP 0+1 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.6ColumnatmVpPMCurrentRxClp0read-onlycurrentThe counter associated with the number of received CLP 0 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.7ColumnatmVpPMCurrentErroredCellsread-onlycurrentThe counter associated with the number of errored cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.8ColumnatmVpPMCurrentLostCellsread-onlycurrentThe counter associated with the number of lost cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.9ColumnatmVpPMCurrentMisinsertedCellsread-onlycurrentThe counter associated with the number of misinserted cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.10ColumnatmVpPMCurrentECBread-onlycurrentThe counter associated with the number of ECB, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.11ColumnatmVpPMCurrentSECBread-onlycurrentThe counter associated with the number of SECB, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.12ColumnatmVpPMCurrentESread-onlycurrentThe counter associated with the number of Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.13ColumnatmVpPMCurrentSESread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.14ColumnatmVpPMCurrentUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.15ColumnatmVpPMCurrentIntervalQualityread-onlycurrentIf the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.16ColumnatmVpPMCurrentLastDayQualityread-onlycurrentIf the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.
1.3.6.1.4.1.164.12.2.1.2.1.3TableatmVpIntervalTablenot-accessiblecurrentThe ATM Vp Interval table.
1.3.6.1.4.1.164.12.2.1.2.1.3.1RowatmVpIntervalEntrynot-accessiblecurrentAn entry in the ATM Vp Interval table.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.1ColumnatmVpIntervalVpiread-onlycurrentThe VPI of the VPL.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.2ColumnatmVpIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.2.1.3.1.3ColumnatmVpIntervalRxCellsClp01read-onlycurrentThe counter associated with the number of transmitted cells , encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.4ColumnatmVpIntervalRxCellsClp0read-onlycurrentThe counter associated with the number of received cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.5ColumnatmVpIntervalGcra0Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA0, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.6ColumnatmVpIntervalGcra1Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA1, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.7ColumnatmVpIntervalRxAISread-onlycurrentThe counter associated with the number of received AIS cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.8ColumnatmVpIntervalTxAISread-onlycurrentThe counter associated with the number of transmitted AIS cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.9ColumnatmVpIntervalRxRDIread-onlycurrentThe counter associated with the number of received RDI cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.10ColumnatmVpIntervalTxRDIread-onlycurrentThe counter associated with the number of transmitted RDI cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.11ColumnatmVpIntervalContinuityLossread-onlycurrentThe counter associated with the number of Continuity Loss cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.12ColumnatmVpIntervalUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.13ColumnatmVpIntervalSESread-onlycurrentThe counter associated with the number of Severerly Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interv…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.14ColumnatmVpIntervalCDCread-onlycurrentAmount of cells dropped in the 15 minute interval of the VP connection.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.15ColumnatmVpIntervalTotalDiscardsread-onlycurrentThe total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.16ColumnatmVpIntervalClp0Discardsread-onlycurrentThe total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.17ColumnatmVpIntervalTotalCellOutsread-onlycurrentThe total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.18ColumnatmVpIntervalClp0CellOutsread-onlycurrentThe total number of valid ATM cells transmitted with CLP=0 by this VPL.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.19ColumnatmVpIntervalTaggedOutsread-onlycurrentThe total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.20ColumnatmVpIntervalPCRread-onlycurrentThe maximum traffic rate encountered in the last interval of the VP connection (monitored once a second) encountered by an ATM interface/VP in one of the previ…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.21ColumnatmVpIntervalSCRread-onlycurrentThe average traffic rate during the last interval of the VP connection , encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, in…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.22ColumnatmVpIntervalMCRread-onlycurrentMCR - The minimum traffic rate encountered in the last interval of the VP connection (monitored once a second) encountered by an ATM interface/VP in one of the…
1.3.6.1.4.1.164.12.2.1.2.1.4TableatmVpPMIntervalTablenot-accessiblecurrentThe ATM Vp Interval table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.1.4.1RowatmVpPMIntervalEntrynot-accessiblecurrentAn entry in the ATM Vp Interval table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.1ColumnatmVpPMIntervalVpiread-onlycurrentThe VPI of the VPL.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.2ColumnatmVpPMIntervalDirread-onlycurrentThe direction of performance management.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.3ColumnatmVpPMIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.2.1.4.1.4ColumnatmVpPMIntervalTxClp01read-onlycurrentThe counter associated with the number of transmitted CLP 0+1 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interv…
1.3.6.1.4.1.164.12.2.1.2.1.4.1.5ColumnatmVpPMIntervalTxClp0read-onlycurrentThe counter associated with the number of transmitted CLP 0 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interval…
1.3.6.1.4.1.164.12.2.1.2.1.4.1.6ColumnatmVpPMIntervalRxClp01read-onlycurrentThe counter associated with the number of received CLP 0+1 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.7ColumnatmVpPMIntervalRxClp0read-onlycurrentThe counter associated with the number of received CLP 0 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.8ColumnatmVpPMIntervalErroredCellsread-onlycurrentThe counter associated with the number of Errored cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.9ColumnatmVpPMIntervalLostCellsread-onlycurrentThe counter associated with the number of Lost cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.10ColumnatmVpPMIntervalMisinsertedCellsread-onlycurrentThe counter associated with the number of Misinserted cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.11ColumnatmVpPMIntervalECBread-onlycurrentThe counter associated with the number of ECBs encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.12ColumnatmVpPMIntervalSECBread-onlycurrentThe counter associated with the number of SECBs encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.13ColumnatmVpPMIntervalESread-onlycurrentThe counter associated with the number of Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.14ColumnatmVpPMIntervalSESread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interva…
1.3.6.1.4.1.164.12.2.1.2.1.4.1.15ColumnatmVpPMIntervalUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.16ColumnatmVpPMIntervalQualityread-onlycurrentIf the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.17ColumnatmVpPMIntervalLastDayQualityread-onlycurrentIf the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.
1.3.6.1.4.1.164.12.2.1.2.1.5TableatmVpQoSTablenot-accessiblecurrentThe VP QoS table.
1.3.6.1.4.1.164.12.2.1.2.1.5.1RowatmVpQoSEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.2.1.2.1.5.1.1ColumnatmVpQoSPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 2 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received…
1.3.6.1.4.1.164.12.2.1.2.1.5.1.2ColumnatmVpQoSElapsedTimeread-onlycurrentElapsed Time in seconds. - for atmVpQoSPeriodRef = currentPeriod: The period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAll…
1.3.6.1.4.1.164.12.2.1.2.1.5.1.3ColumnatmVpQoSUASread-onlycurrentNumber of Unavailable Seconds for the reference period (atmVpQoSPeriodRef).
1.3.6.1.4.1.164.12.2.1.2.1.6TableatmVpPMQoSTablenot-accessiblecurrentThe PM VP QoS table.
1.3.6.1.4.1.164.12.2.1.2.1.6.1RowatmVpPMQoSEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.2.1.2.1.6.1.1ColumnatmVpPMQoSDirectionread-onlycurrentThe direction of performance management.
1.3.6.1.4.1.164.12.2.1.2.1.6.1.2ColumnatmVpPMQoSPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received…
1.3.6.1.4.1.164.12.2.1.2.1.6.1.3ColumnatmVpPMQoSCLRread-onlycurrentCell Loss Ratio counter for the reference period (atmVpPMQoSPeriodRef)- defined in accordance with I.356 , in %. The value will be multipuled by 100.
1.3.6.1.4.1.164.12.2.1.2.1.6.1.4ColumnatmVpPMQoSCERread-onlycurrentCell Error Ratio counter for the reference period (atmVpPMQoSPeriodRef) defined in accordance with I.356 , in %. The value will be multipuled by 100.
1.3.6.1.4.1.164.12.2.1.2.1.6.1.5ColumnatmVpPMQoSCMRread-onlycurrentCell Misinsertion Ratio counter for the reference period (atmVpPMQoSPeriodRef) defined in accordance with I.356 , cells/sec .
1.3.6.1.4.1.164.12.2.1.2.1.7TableatmVpShaperStatTablenot-accessiblecurrentThe ATM VP shaper statistics table.
1.3.6.1.4.1.164.12.2.1.2.1.7.1RowatmVpShaperStatEntrynot-accessiblecurrentAn entry in the ATM VP shaper statistics table.
1.3.6.1.4.1.164.12.2.1.2.1.7.1.1ColumnatmVpShaperDiscardedread-onlycurrentThe number of Cells that were discarded in the shaper on that VPC due to buffer overflow. This counter counts till it reaches its MAX value (20 bits) and then …
1.3.6.1.4.1.164.12.2.1.2.1.7.1.2ColumnatmVpShaperOccupationread-onlycurrentThe number of Cells that are currently stored in the buffer. This parameter is limited to 20 bits.
1.3.6.1.4.1.164.12.2.1.2.1.7.1.3ColumnatmVpShaperMaxOccupationread-onlycurrentThe Maximum number of Cells that were stored in the buffer, since this VP was activated. This parameter is limited to 20 bits.
1.3.6.1.4.1.164.12.2.1.2.1.7.1.4ColumnatmVpShaperLevelread-onlycurrentThe occupation of the buffer according to a predefined threshold. empty - buffer is Empty full - buffer is Full below - buffer is Below the threshold above - b…
1.3.6.1.4.1.164.12.2.1.2.1.7.1.5ColumnatmVpShaperEpdDroppedread-onlycurrentThe number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last second. This parameter is limited to 24 bits. Applicable f…
1.3.6.1.4.1.164.12.2.1.2.1.7.1.6ColumnatmVpShaperTotalEpdDroppedread-onlycurrentThe Total number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last 15 minutes. This counter automatically reset itself …
1.3.6.1.4.1.164.12.2.1.2.2NodeatmVcPerformance
1.3.6.1.4.1.164.12.2.1.2.2.1TableatmVcCurrentTablenot-accessiblecurrentThe ATM VC Current table.
1.3.6.1.4.1.164.12.2.1.2.2.1.1RowatmVcCurrentEntrynot-accessiblecurrentAn entry in the ATM VC Current table.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.1ColumnatmVcCurrentVpiread-onlycurrentThe VPI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.2ColumnatmVcCurrentVciread-onlycurrentThe VCI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.3ColumnatmVcCurrentRxCellsClp01read-onlycurrentThe counter associated with the number of transmitted cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.4ColumnatmVcCurrentRxCellsClp0read-onlycurrentThe counter associated with the number of received cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.5ColumnatmVcCurrentGcra0Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA0, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.6ColumnatmVcCurrentGcra1Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA1, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.7ColumnatmVcCurrentRxAISread-onlycurrentThe counter associated with the number of received AIS cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.8ColumnatmVcCurrentTxAISread-onlycurrentThe counter associated with the number of transmitted AIS cells, encountered by the VCL of this ATM interface in the current 15 minute interval. Not Supported …
1.3.6.1.4.1.164.12.2.1.2.2.1.1.9ColumnatmVcCurrentRxRDIread-onlycurrentThe counter associated with the number of received RDI cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.10ColumnatmVcCurrentTxRDIread-onlycurrentThe counter associated with the number of transmitted RDI cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.11ColumnatmVcCurrentContinuityLossread-onlycurrentThe counter associated with the number of loss of continuity cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.12ColumnatmVcCurrentUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.13ColumnatmVcCurrentSESread-onlycurrentThe counter associated with the number of Severerly Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.14ColumnatmVcCurrentCDCread-onlycurrentAmount of cells dropped in the current 15 minute interval of the VC connection.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.15ColumnatmVcCurrentTotalDiscardsread-onlycurrentThe total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.16ColumnatmVcCurrentClp0Discardsread-onlycurrentThe total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.17ColumnatmVcCurrentTotalCellOutsread-onlycurrentThe total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.18ColumnatmVcCurrentClp0CellOutsread-onlycurrentThe total number of valid ATM cells transmitted with CLP=0 by this VPL.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.19ColumnatmVcCurrentTaggedOutsread-onlycurrentThe total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.20ColumnatmVcCurrentPCRread-onlycurrentThe maximum traffic rate encountered in the last interval of the VC connection (monitored once a second).
1.3.6.1.4.1.164.12.2.1.2.2.1.1.21ColumnatmVcCurrentSCRread-onlycurrentThe average traffic rate during the last interval of the VC connection.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.22ColumnatmVcCurrentMCRread-onlycurrentMCR - The minimum traffic rate encountered in the last interval of the VC connection (monitored once a second).
1.3.6.1.4.1.164.12.2.1.2.2.2TableatmVcPMCurrentTablenot-accessiblecurrentThe ATM VC Current table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.2.1RowatmVcPMCurrentEntrynot-accessiblecurrentAn entry in the ATM VC Current table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.1ColumnatmVcPMCurrentVpiread-onlycurrentThe VPI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.2ColumnatmVcPMCurrentVciread-onlycurrentThe VCI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.3ColumnatmVcPMCurrentDirread-onlycurrentThe direction of Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.4ColumnatmVcPMCurrentTxClp01read-onlycurrentThe counter associated with the number of transmitted CLP 0+1 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.5ColumnatmVcPMCurrentTxClp0read-onlycurrentThe counter associated with the number of transmitted CLP 0 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.6ColumnatmVcPMCurrentRxClp01read-onlycurrentThe counter associated with the number of received CLP 0+1 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.7ColumnatmVcPMCurrentRxClp0read-onlycurrentThe counter associated with the number of received CLP 0 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.8ColumnatmVcPMCurrentErroredCellsread-onlycurrentThe counter associated with the number of errored cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.9ColumnatmVcPMCurrentLostCellsread-onlycurrentThe counter associated with the number of lost cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.10ColumnatmVcPMCurrentMisinsertedCellsread-onlycurrentThe counter associated with the number of misinserted cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.11ColumnatmVcPMCurrentECBread-onlycurrentThe counter associated with the number of ECBs encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.12ColumnatmVcPMCurrentSECBread-onlycurrentThe counter associated with the number of SECBs encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.13ColumnatmVcPMCurrentESread-onlycurrentThe counter associated with the number of Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.14ColumnatmVcPMCurrentSESread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.15ColumnatmVcPMCurrentUASread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.16ColumnatmVcPMCurrentIntervalQualityread-onlycurrentIf the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.17ColumnatmVcPMCurrentLastDayQualityread-onlycurrentIf the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.
1.3.6.1.4.1.164.12.2.1.2.2.3TableatmVcIntervalTablenot-accessiblecurrentThe ATM Vc Interval table.
1.3.6.1.4.1.164.12.2.1.2.2.3.1RowatmVcIntervalEntrynot-accessiblecurrentAn entry in the ATM Vc Interval table.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.1ColumnatmVcIntervalVpiread-onlycurrentThe VPI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.2ColumnatmVcIntervalVciread-onlycurrentThe VCI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.3ColumnatmVcIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.2.2.3.1.4ColumnatmVcIntervalRxCellsClp01read-onlycurrentThe counter associated with the number of transmitted cells , encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.5ColumnatmVcIntervalRxCellsClp0read-onlycurrentThe counter associated with the number of received cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.6ColumnatmVcIntervalGcra0Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA0, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.7ColumnatmVcIntervalGcra1Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA1, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.8ColumnatmVcIntervalRxAISread-onlycurrentThe counter associated with the number of received AIS cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.9ColumnatmVcIntervalTxAISread-onlycurrentThe counter associated with the number of transmitted AIS cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.10ColumnatmVcIntervalRxRDIread-onlycurrentThe counter associated with the number of received RDI cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.11ColumnatmVcIntervalTxRDIread-onlycurrentThe counter associated with the number of transmitted RDI cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.12ColumnatmVcIntervalContinuityLossread-onlycurrentThe counter associated with the number of Continuity Loss cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.13ColumnatmVcIntervalUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.14ColumnatmVcIntervalSESread-onlycurrentThe counter associated with the number of Severerly Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interv…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.15ColumnatmVcIntervalCDCread-onlycurrentAmount of cells dropped in the 15 minute interval of the VC connection.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.16ColumnatmVcIntervalTotalDiscardsread-onlycurrentThe total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.17ColumnatmVcIntervalClp0Discardsread-onlycurrentThe total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.18ColumnatmVcIntervalTotalCellOutsread-onlycurrentThe total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.19ColumnatmVcIntervalClp0CellOutsread-onlycurrentThe total number of valid ATM cells transmitted with CLP=0 by this VPL.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.20ColumnatmVcIntervalTaggedOutsread-onlycurrentThe total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.21ColumnatmVcIntervalPCRread-onlycurrentThe maximum traffic rate encountered in the last interval of the VC connection (monitored once a second) encountered by an ATM interface/VC in one of the previ…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.22ColumnatmVcIntervalSCRread-onlycurrentThe average traffic rate during the last interval of the VC connection, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, int…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.23ColumnatmVcIntervalMCRread-onlycurrentMCR - The minimum traffic rate encountered in the last interval of the VC connection (monitored once a second) encountered by an ATM interface/VC in one of the…
1.3.6.1.4.1.164.12.2.1.2.2.4TableatmVcPMIntervalTablenot-accessiblecurrentThe ATM Vc Interval table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.4.1RowatmVcPMIntervalEntrynot-accessiblecurrentAn entry in the ATM Vc Interval table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.1ColumnatmVcPMIntervalVpiread-onlycurrentThe VPI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.2ColumnatmVcPMIntervalVciread-onlycurrentThe VCI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.3ColumnatmVcPMIntervalDirread-onlycurrentThe direction of Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.4ColumnatmVcPMIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.2.2.4.1.5ColumnatmVcPMIntervalTxClp01read-onlycurrentThe counter associated with the number of transmitted CLP 0+1 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interv…
1.3.6.1.4.1.164.12.2.1.2.2.4.1.6ColumnatmVcPMIntervalTxClp0read-onlycurrentThe counter associated with the number of transmitted CLP 0 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interval…
1.3.6.1.4.1.164.12.2.1.2.2.4.1.7ColumnatmVcPMIntervalRxClp01read-onlycurrentThe counter associated with the number of received CLP 0+1 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.8ColumnatmVcPMIntervalRxClp0read-onlycurrentThe counter associated with the number of received CLP 0 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.9ColumnatmVcPMIntervalErroredCellsread-onlycurrentThe counter associated with the number of Errored cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.10ColumnatmVcPMIntervalLostCellsread-onlycurrentThe counter associated with the number of Lost cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.11ColumnatmVcPMIntervalMisinsertedCellsread-onlycurrentThe counter associated with the number of Misinserted cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.12ColumnatmVcPMIntervalECBread-onlycurrentThe counter associated with the number of ECBs encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.13ColumnatmVcPMIntervalSECBread-onlycurrentThe counter associated with the number of SECBs encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.14ColumnatmVcPMIntervalESread-onlycurrentThe counter associated with the number of Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.15ColumnatmVcPMIntervalSESread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interva…
1.3.6.1.4.1.164.12.2.1.2.2.4.1.16ColumnatmVcPMIntervalUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.17ColumnatmVcPMIntervalQualityread-onlycurrentIf the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.18ColumnatmVcPMIntervalLastDayQualityread-onlycurrentIf the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.
1.3.6.1.4.1.164.12.2.1.2.2.6TableatmVcQoSTablenot-accessiblecurrentThe ATM VP QoS table.
1.3.6.1.4.1.164.12.2.1.2.2.6.1RowatmVcQoSEntrynot-accessiblecurrentAn entry in the ATM VP table.
1.3.6.1.4.1.164.12.2.1.2.2.6.1.1ColumnatmVcQoSPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 2 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received…
1.3.6.1.4.1.164.12.2.1.2.2.6.1.2ColumnatmVcQoSElapsedTimeread-onlycurrentElapsed Time in seconds. - for atmVcQoSPeriodRef = currentPeriod: The period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAll…
1.3.6.1.4.1.164.12.2.1.2.2.6.1.3ColumnatmVcQoSUASread-onlycurrentNumber of Unavailable Seconds for the reference period (atmVcQoSPeriodRef).
1.3.6.1.4.1.164.12.2.1.2.2.7TableatmVcPMQoSTablenot-accessiblecurrentThe PM VC QoS table.
1.3.6.1.4.1.164.12.2.1.2.2.7.1RowatmVcPMQoSEntrynot-accessiblecurrentAn entry in the VC PM QoS table.
1.3.6.1.4.1.164.12.2.1.2.2.7.1.1ColumnatmVcPMQoSDirectionread-onlycurrentThe direction of performance management.
1.3.6.1.4.1.164.12.2.1.2.2.7.1.2ColumnatmVcPMQoSPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received…
1.3.6.1.4.1.164.12.2.1.2.2.7.1.3ColumnatmVcPMQoSCLRread-onlycurrentCell Loss Ratio counter for the reference period (atmVcPMQoSPeriodRef)- defined in accordance with I.356 , in %. The value will be multipuled by 100.
1.3.6.1.4.1.164.12.2.1.2.2.7.1.4ColumnatmVcPMQoSCERread-onlycurrentCell Error Ratio counter for the reference period (atmVcPMQoSPeriodRef) defined in accordance with I.356 , in %. The value will be multipuled by 100.
1.3.6.1.4.1.164.12.2.1.2.2.7.1.5ColumnatmVcPMQoSCMRread-onlycurrentCell Miss-insertion Ratio counter for the reference period (atmVcPMQoSPeriodRef) defined in accordance with I.356 , cells/sec .
1.3.6.1.4.1.164.12.2.1.2.2.8TableatmVcShaperStatTablenot-accessiblecurrentThe ATM VC shaper statistics table.
1.3.6.1.4.1.164.12.2.1.2.2.8.1RowatmVcShaperStatEntrynot-accessiblecurrentAn entry in the ATM VC shaper statistics table.
1.3.6.1.4.1.164.12.2.1.2.2.8.1.1ColumnatmVcShaperDiscardedread-onlycurrentThe number of Cells that were discarded in the shaper on that VCC due to buffer overflow. This counter counts till it reaches its MAX value (20 bits) and then …
1.3.6.1.4.1.164.12.2.1.2.2.8.1.2ColumnatmVcShaperOccupationread-onlycurrentThe number of Cells that are currently stored in the buffer. This parameter is limited to 20 bits.
1.3.6.1.4.1.164.12.2.1.2.2.8.1.3ColumnatmVcShaperMaxOccupationread-onlycurrentThe Maximum number of Cells that were stored in the buffer, since this VC was activated. This parameter is limited to 20 bits.
1.3.6.1.4.1.164.12.2.1.2.2.8.1.4ColumnatmVcShaperLevelread-onlycurrentThe occupation of the buffer according to a predefined threshold. empty - buffer is Empty full - buffer is Full below - buffer is Below the threshold above - b…
1.3.6.1.4.1.164.12.2.1.2.2.8.1.5ColumnatmVcShaperEpdDroppedread-onlycurrentThe number of Cells that were dropped in the shaper on that VCC due to EPD\PPD mechanism in the last second. This parameter is limited to 24 bits. Applicable f…
1.3.6.1.4.1.164.12.2.1.2.2.8.1.6ColumnatmVcShaperTotalEpdDroppedread-onlycurrentThe Total number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last 15 minutes. This counter automatically reset itself …
1.3.6.1.4.1.164.12.2.1.3TableatmIntervalDateTablenot-accessiblecurrentThe agent will keep in this group the date & time corresponding to each interval.
1.3.6.1.4.1.164.12.2.1.3.1RowatmIntervalDateEntrynot-accessiblecurrentThe date & time for the given interval.
1.3.6.1.4.1.164.12.2.1.3.1.1ColumnatmIntervalDateIntervalread-onlycurrentThe interval number defining this entry.
1.3.6.1.4.1.164.12.2.1.3.1.2ColumnatmIntervalDateDateread-onlycurrentThe date corresponding to this interval.
1.3.6.1.4.1.164.12.2.1.3.1.3ColumnatmIntervalDateTimeread-onlycurrentThe time corresponding to this interval.
1.3.6.1.4.1.164.12.2.2NodeatmGenSystem
1.3.6.1.4.1.164.12.2.2.1NodeatmGenSysGen
1.3.6.1.4.1.164.12.2.2.1.1TableatmGenSysSelfTestTablenot-accessiblecurrentA table containing the results of the initial testing of the device.
1.3.6.1.4.1.164.12.2.2.1.1.1RowatmGenSysSelfTestEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.2.2.1.1.1.1ColumnatmGenSysSelfTestIndexread-onlycurrentA running index for the table.
1.3.6.1.4.1.164.12.2.2.1.1.1.2ColumnatmGenSysSelfTestResultread-onlycurrentThe results of the initial testing of the device.
1.3.6.1.4.1.164.12.2.2.1.2ScalaratmGenSysLogClearAllread-writecurrentSetting the variable to clear(3) removes all entries in the Log Buffer of the agent. The agent will immediately reset the variable to off(2).
1.3.6.1.4.1.164.12.2.2.1.3TableatmGenSysLogTablenot-accessiblecurrentA copy of the log buffer.
1.3.6.1.4.1.164.12.2.2.1.3.1RowatmGenSysLogEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.2.2.1.3.1.1ColumnatmGenSysLogIndexread-onlycurrentThe index of the log buffer.
1.3.6.1.4.1.164.12.2.2.1.3.1.2ColumnatmGenSysLogMessageread-onlycurrentThe log buffer entry message text.
1.3.6.1.4.1.164.12.2.2.1.4ScalaratmGenSysSetDefaultConfgread-writecurrentWhen set to on(3), the agent will set all the configuration parameters to their default values. The variable is then reset to off(2) by the agent. The agent mu…
1.3.6.1.4.1.164.12.2.2.1.5TableatmGenSysCxRefTablenot-accessiblecurrentA Cross Reference table. The table maintains an index of an object which is also the table index, and a counter that indicates how many times this object was r…
1.3.6.1.4.1.164.12.2.2.1.5.1RowatmGenSysCxRefEntrynot-accessiblecurrentThe entries will be added by the agent upon an entry addition in the referenced tables (TD table, FR Descriptor etc.)
1.3.6.1.4.1.164.12.2.2.1.5.1.1ColumnatmGenSysCxRefIndexread-onlycurrentThe index specifies an entry in the table of the object.
1.3.6.1.4.1.164.12.2.2.1.5.1.2ColumnatmGenSysCxRefCounterread-onlycurrentThe counter counts the number of references that have been made to the object .
1.3.6.1.4.1.164.12.3NodeatmNte
1.3.6.1.4.1.164.12.3.0IdentityatmNteEventscurrentThe events for RAD ATM products.
1.3.6.1.4.1.164.12.3.0.1NotificationatmAceStatusChangecurrentThe trap is sent every time there is a change in the state of one of the LEDs.
1.3.6.1.4.1.164.12.3.0.2NotificationatmAceAlarmTrapcurrentThe trap is sent whenever there is a transition from a no alarm state to a state with at least one active alarm. An active alarm state exists if: 1) The atmInt…
1.3.6.1.4.1.164.12.3.0.3NotificationatmAceModuleChangeTrapcurrentThe trap is sent every time a module is changed (Hot swapping). The second variable will be atmNteCardType to indicate the type of card that was inserted. The …
1.3.6.1.4.1.164.12.3.0.4NotificationatmAceRedundancyTrapcurrentThe trap is sent upon change in link as a result of redundancy. The ifIndex parameter indicates the current active link.
1.3.6.1.4.1.164.12.3.1NodeatmNteSys
1.3.6.1.4.1.164.12.3.1.1NodeatmNteSysConfig
1.3.6.1.4.1.164.12.3.1.1.1TableatmNteManagerTablenot-accessiblecurrentThe Manager Table includes all the NMSs that receive traps from this agent. A single manager can receive traps on more than one PVC. The PVCs must be from the …
1.3.6.1.4.1.164.12.3.1.1.1.1RowatmNteManagerEntrynot-accessiblecurrentA single manager and the PVC for receiving traps.
1.3.6.1.4.1.164.12.3.1.1.1.1.1ColumnatmNteManagerIPread-onlycurrentThe IP address of the NMS.
1.3.6.1.4.1.164.12.3.1.1.1.1.2ColumnatmNteManagerPvcread-onlycurrentA PVC index. The range is 1..8. There are four PVCs on the User Port and four PVCs on the Network Port. The default VPI, VCI values are specified below.
1.3.6.1.4.1.164.12.3.1.1.1.1.3ColumnatmNteManagerIfIndexread-createcurrentThe ATM interface index of the management port.
1.3.6.1.4.1.164.12.3.1.1.1.1.4ColumnatmNteManagerVpiread-createcurrentThe VPI of the management VCL. Default: 0.
1.3.6.1.4.1.164.12.3.1.1.1.1.5ColumnatmNteManagerVciread-createcurrentThe VCI of the management VCL. Defaults: 32,33,34,35.
1.3.6.1.4.1.164.12.3.1.1.1.1.6ColumnatmNteManagerTrapMaskread-createcurrentThe value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different prod…
1.3.6.1.4.1.164.12.3.1.1.1.1.7ColumnatmNteManagerRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.1.1.1.1.8ColumnatmNteManagerNextHopread-createcurrentThis parameter is relevant to Ethernet out of band host only (PVC=10). The Next Hop IP address of the entry route.
1.3.6.1.4.1.164.12.3.1.1.1.1.9ColumnatmNteManagerVlanSupportread-createcurrentVLAN support (Tagging). no - No support to VLAN. yes - 4 VLAN bytes will be added to the frame.
1.3.6.1.4.1.164.12.3.1.1.1.1.10ColumnatmNteManagerVlanIdentifierread-createcurrentVLAN ID. Range is 0..4095.
1.3.6.1.4.1.164.12.3.1.1.1.1.11ColumnatmNteManagerVlanFramePriorityread-createcurrentVLAN Frame priority.Range is 0..7.
1.3.6.1.4.1.164.12.3.1.1.2ScalaratmNteUPLTCRread-writecurrentThe Unacceptable ES Limit threshold for Performance Management.
1.3.6.1.4.1.164.12.3.1.1.3ScalaratmNteDPLTCRread-writecurrentThe Degraded ES Limit threshold for Performance Management.
1.3.6.1.4.1.164.12.3.1.1.4ScalaratmNteSysLogClearAllread-writecurrentSetting the variable to clear(3) removes all entries in the Log Buffer of the agent. The agent will immediately reset the variable to off(2).
1.3.6.1.4.1.164.12.3.1.1.5ScalaratmNteUSESLTCRread-writecurrentThe Unacceptable SES Limit threshold for Performance Management.
1.3.6.1.4.1.164.12.3.1.1.6ScalaratmNteDSESLTCRread-writecurrentThe Degraded ES Limit threshold for Performance Management.
1.3.6.1.4.1.164.12.3.1.1.8NodeatmNteProtection
1.3.6.1.4.1.164.12.3.1.1.8.1ScalaratmNteProtectionModeread-writecurrentProtection Mode. MspOn - Multiplex section protection. pathOn - High order path protection. mspUniOn - Multiplex section Uni-directional protection. mspOneToN …
1.3.6.1.4.1.164.12.3.1.1.8.2ScalaratmNteProtectionWorkingLinkread-writecurrentSelects the working link when atmNteProtectionMode is off.
1.3.6.1.4.1.164.12.3.1.1.8.3ScalaratmNteProtectionSwitchLinkread-writecurrentForceSwitch - will force Switching from the working link to the backup link. Afterwards the agent will set atmNteProtectionSwitchLink back to off(1). atmNtePro…
1.3.6.1.4.1.164.12.3.1.1.9NodeatmNteConfOam
1.3.6.1.4.1.164.12.3.1.1.9.1ScalaratmNteConfOamSupportread-writecurrentOAM support mode, which determines the device location in a segment wise.
1.3.6.1.4.1.164.12.3.1.1.9.2NodeatmNteConfOamTransmission
1.3.6.1.4.1.164.12.3.1.1.9.2.1ScalaratmNteConfOamAISread-writecurrentDefines if a F4 segment OAM cell is transmitted due to problems in the other port, i.e. physical layer alarm or F4 defect. This is valid only when the ACE101 h…
1.3.6.1.4.1.164.12.3.1.1.9.2.2ScalaratmNteConfOamRDIread-writecurrentDefines if an F4 OAM RDI cell is transmitted due to physical layer problems in the port (in addition to F4 RDI cells transmitted due to ATM layer problems). Th…
1.3.6.1.4.1.164.12.3.1.1.9.3NodeatmNteConfOamAddressing
1.3.6.1.4.1.164.12.3.1.1.9.3.1ScalaratmNteConfLoopbackAddModeread-writecurrentLoopback addressing mode. on - will enable loopback addressing. off - will disable loopback addressing.
1.3.6.1.4.1.164.12.3.1.1.9.3.2ScalaratmNteConfLoopbackSourceAddread-writecurrentLoopback source address. This field is relevant when atmNteConfOamAddMode is on.
1.3.6.1.4.1.164.12.3.1.1.9.4TableatmNteConfOamIfTablenot-accessiblecurrentOAM support per ATM interface.
1.3.6.1.4.1.164.12.3.1.1.9.4.1RowatmNteConfOamIfEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.3.1.1.9.4.1.1ColumnatmNteConfOamIfAisRdiread-writecurrentThis parameter controls the generation of F4/F5 AIS and RDI due to lower order problems such as physical layer problems. For AIS: Defines if F4/F5 AIS cell is …
1.3.6.1.4.1.164.12.3.1.1.10NodeatmNteConfCAC
1.3.6.1.4.1.164.12.3.1.1.10.1ScalaratmNteConfCACModeread-writecurrentCAC support mode. For ACE2002, the following are the applicable values: disable(1), enable(2), 10 - 1000.
1.3.6.1.4.1.164.12.3.1.1.11TableatmNteHostIfTablenot-accessiblecurrentHost IP interface table.
1.3.6.1.4.1.164.12.3.1.1.11.1RowatmNteHostIfEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.3.1.1.11.1.1ColumnatmNteHostPvcIndexread-onlycurrentA PVC index. The range is 1..8. There are four PVCs on the User Port and four PVCs on the Network Port.
1.3.6.1.4.1.164.12.3.1.1.11.1.2ColumnatmNteHostIPread-createcurrentThe host interface IP address.
1.3.6.1.4.1.164.12.3.1.1.11.1.3ColumnatmNteHostMaskread-createcurrentThe host interface subnet mask.
1.3.6.1.4.1.164.12.3.1.1.11.1.4ColumnatmNteHostAtmIfIndexread-createcurrentATM interface index. Will be 1 for user port, and 2 for network port.
1.3.6.1.4.1.164.12.3.1.1.11.1.5ColumnatmNteHostVpiread-createcurrentVPI of the PVC connected to that host interface.
1.3.6.1.4.1.164.12.3.1.1.11.1.6ColumnatmNteHostVciread-createcurrentVCI of the PVC connected to that host interface.
1.3.6.1.4.1.164.12.3.1.1.11.1.7ColumnatmNteHostRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.1.1.11.1.8ColumnatmNteHostRdnVpiread-createcurrentThe VPI of the redundant management VCL. This parameter is applicable only if atmNteRdnManagement=enable(3).
1.3.6.1.4.1.164.12.3.1.1.11.1.9ColumnatmNteHostRdnVciread-createcurrentThe VCI of the redundant management VCL. This parameter is applicable only if atmNteRdnManagement=enable(3).
1.3.6.1.4.1.164.12.3.1.1.12ScalaratmNteShaperModeread-writecurrentShaper Mode. vpInbandMng - Vcc within a Vp for management.
1.3.6.1.4.1.164.12.3.1.1.13ScalaratmNteOutputRateread-writecurrentAggregate shaping output rate in Cells per Seconds units. Default value is the Network port rate.
1.3.6.1.4.1.164.12.3.1.1.14ScalaratmNteTosModeread-writecurrentTOS Mode.
1.3.6.1.4.1.164.12.3.1.1.15ScalaratmNteTosMaskread-writecurrentThis parameter determines the seqence of bits that will be used for TOS. This parameter is applicable only if atmNteTosMode = enable. Valid only for IP-TOS pro…
1.3.6.1.4.1.164.12.3.1.1.16ScalaratmNteTosHighPriorityread-writecurrentPriorities options are High or Low. High priority will be represented by bit = 1. Low priority will be represented by bit = 0. Each TOS value will be represent…
1.3.6.1.4.1.164.12.3.1.1.17ScalaratmNtePlugAndPlayActivityread-writecurrentActivity control for Manager Plug And Play. disable - disable the feature. offline - Automatic learn IP address into offline memory. online - Automatic learn I…
1.3.6.1.4.1.164.12.3.1.1.18ScalaratmNteSlotUsageread-writecurrentApplicable to ace2002. Slot 2 might be configured as user slot or as network slot.
1.3.6.1.4.1.164.12.3.1.1.19ScalaratmNteConnectionsMaxNumberread-writecurrentThe MAX number of connections supported by system. Setting this parameter will affect the number of MAX intervals supported. This parameter will affect the sys…
1.3.6.1.4.1.164.12.3.1.1.20ScalaratmNteDefaultVpiread-writecurrentDefault Vpi for management.
1.3.6.1.4.1.164.12.3.1.1.21ScalaratmNteDefaultVciread-writecurrentDefault Vci for management.
1.3.6.1.4.1.164.12.3.1.1.22ScalaratmNteReservedVpiread-writecurrentInternal use VPI, where shaperMode=vpInbandMng.
1.3.6.1.4.1.164.12.3.1.1.23ScalaratmNteRdnManagementread-onlycurrentThe redundancy management status.
1.3.6.1.4.1.164.12.3.1.1.24ScalaratmNtePlugAndPlayIfIndexread-writecurrentThe ifIndex of the Plug and Play VCC.
1.3.6.1.4.1.164.12.3.1.1.25ScalaratmNteLoopbackTimeoutread-writecurrentThe Loopback state timeout in minutes. A value of zero means no timeout (for ever). Default is 5 min.
1.3.6.1.4.1.164.12.3.1.1.26TableatmNteOamTablenot-accessiblecurrentThis table is a static table, which is created by agent once upon initialization. The created entries are actually, only the supported OAM features. This table…
1.3.6.1.4.1.164.12.3.1.1.26.1RowatmNteOamEntrynot-accessiblecurrentAn entry in the OAM table. Each entry in this table will indicate a special OAM.
1.3.6.1.4.1.164.12.3.1.1.26.1.1ColumnatmNteOamModeread-onlycurrentThe OAM cell path. endToEnd(1) - the entire path.
1.3.6.1.4.1.164.12.3.1.1.26.1.2ColumnatmNteOamCellTyperead-onlycurrentThis object indicates a unique Indication Signal. aisAndRdi(1) - Alarm Indication Signal (AIS) and Remote Defect Indication (RDI) cell. loopback(2) - Loopback …
1.3.6.1.4.1.164.12.3.1.1.26.1.3ColumnatmNteOamLevelread-onlycurrentThe level of the OAM cell. f5 (3) - VC level.
1.3.6.1.4.1.164.12.3.1.1.26.1.4ColumnatmNteOamEnableread-writecurrentThis parameter determines if the specified OAM cells will be enabled.
1.3.6.1.4.1.164.12.3.1.2NodeatmNteSysInfo
1.3.6.1.4.1.164.12.3.1.2.1TableatmNteIdTablenot-accessiblecurrentThe IDs of the cards and of the system.
1.3.6.1.4.1.164.12.3.1.2.1.1RowatmNteIdEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.3.1.2.1.1.1ColumnatmNteIdIndexread-onlycurrentAn Index of the Unit ID table. The following units have IDs in this table: 1 - System 2 - ATM Board 3 - User Card 4 - Trunk 1 card 5 - Trunk 2 card 6 - Shaper …
1.3.6.1.4.1.164.12.3.1.2.1.1.2ColumnatmNteUnitIdread-onlycurrentThe ID of the Unit. For index = 6, the id will describe the validity of a shaper in the system: 0 - Shaper Not exist 1 - Shaper exist. For index = 7, the id wi…
1.3.6.1.4.1.164.12.3.1.2.1.1.3ColumnatmNteUnitVersionread-onlycurrentHardware and Software version of the module.
1.3.6.1.4.1.164.12.3.1.2.1.1.4ColumnatmNteCardTyperead-onlycurrentThe card type.
1.3.6.1.4.1.164.12.3.1.2.2ScalaratmSysPSunitsread-onlycurrentThe number of power supply units.
1.3.6.1.4.1.164.12.3.1.2.3ScalaratmSysPSunitsInUseread-onlycurrentThe main power supply in this unit.
1.3.6.1.4.1.164.12.3.1.2.4ScalaratmSysFanUnitsread-onlycurrentThe number of fan units.
1.3.6.1.4.1.164.12.3.1.2.5ScalaratmSysNetPrtsread-onlycurrentThe number of network ports.
1.3.6.1.4.1.164.12.3.1.2.6ScalaratmSysNetPrtInUseread-onlycurrentThe network port in use.
1.3.6.1.4.1.164.12.3.1.2.7ScalaratmNteBridgingModeread-writecurrentBridging mode can be one of the following: ATM <> Ethernet - Bridging is between the Ethernet port and the ATM port (there is no bridging between VCs). ATM <> …
1.3.6.1.4.1.164.12.3.1.2.8NodeatmSysStats
1.3.6.1.4.1.164.12.3.1.2.8.1ScalaratmSysCurrentCdcread-onlycurrentSeconds in which cells dropped was occured in the current 15 minutes interval.
1.3.6.1.4.1.164.12.3.1.2.8.2TableatmSysIntervalTablenot-accessiblecurrentThe system level Interval table.
1.3.6.1.4.1.164.12.3.1.2.8.2.1RowatmSysIntervalEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.3.1.2.8.2.1.1ColumnatmSysIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.3.1.2.8.2.1.2ColumnatmSysIntervalCdcread-onlycurrentSeconds in which cells dropped was occured in 15 minutes interval.
1.3.6.1.4.1.164.12.3.1.2.9ScalaratmNteEventTyperead-onlycurrentThis parameter identifies the event. On - the problem exist. Off - the problem not exist. InvalidLogin - Invalid login on local console. CorrectLogin - Success…
1.3.6.1.4.1.164.12.3.1.2.10ScalaratmNteIntervalMaxNumberread-onlycurrentThe MAX number of connections intervals supported by system. This parameter value is a function of atmNteConnectionsMaxNumber parameter. This parameter should …
1.3.6.1.4.1.164.12.3.1.2.11ScalaratmNteAlarmTyperead-onlycurrentThis object specifies the type of the alarm.
1.3.6.1.4.1.164.12.3.1.2.12ScalaratmNteLevelread-onlycurrentThis object specifies the ATM level.
1.3.6.1.4.1.164.12.3.1.2.13ScalaratmNteConnectionsNumberread-onlycurrentThis object specifies a quantity of connections.
1.3.6.1.4.1.164.12.3.2NodeatmNtePrt
1.3.6.1.4.1.164.12.3.2.1NodeatmNtePrtConfig
1.3.6.1.4.1.164.12.3.2.1.1TableatmNteConfIfTablenot-accessiblecurrentThe Physical interface configuration table.
1.3.6.1.4.1.164.12.3.2.1.1.1RowatmNteConfIfEntrynot-accessiblecurrentAn entry in the Physical interface configuration table. The ifIndex is of the lowest physical layer.
1.3.6.1.4.1.164.12.3.2.1.1.1.1ColumnatmConfIfTransmitClkread-writecurrentThe transmit clock of the port.
1.3.6.1.4.1.164.12.3.2.1.1.1.2ColumnatmConfIfLoopbackread-writecurrentInterface Loopback.
1.3.6.1.4.1.164.12.3.2.1.1.1.3ColumnatmConfIfFrameTyperead-writecurrentThe frame type. Valid values for a 155M interface: sonet(2), sdh(3). Valid values for a T3 interface: direct(4), plcpInternal(5), plcpExternal(6), directNoScrm…
1.3.6.1.4.1.164.12.3.2.1.1.1.4ColumnatmConfIfCardTyperead-onlydeprecatedThe card type.
1.3.6.1.4.1.164.12.3.2.1.1.1.5ColumnatmConfAtmIfVpiVciLimitread-onlycurrentThe limit on the sum of the VPI+VCI bits for this interface.
1.3.6.1.4.1.164.12.3.2.1.1.1.6ColumnatmConfIfHwFeaturesread-writecurrentHW features command.
1.3.6.1.4.1.164.12.3.2.1.1.1.7ColumnatmConfIfOutputRateread-writecurrentThis parameter indicates the output rate in cells/sec, which is supported per port. Successfully setting this parameter is dependent on all other ports values …
1.3.6.1.4.1.164.12.3.2.1.1.1.8ColumnatmConfIfInputRateread-writecurrentThis parameter indicates the input rate in cells/sec, which is supported per port. Successfully setting this parameter is dependent on all other ports values c…
1.3.6.1.4.1.164.12.3.2.1.1.1.9ColumnatmConfAlarmForwardingread-writecurrentEnables Path AIS Alarm forwarding upon a failure detection. The following might be considered as a failure: LOS, LOF, LOC, SLM, LOP, Path AIS and Line AIS. dis…
1.3.6.1.4.1.164.12.3.2.1.2TableatmNteAlarmIfTablenot-accessiblecurrentThe interface Alarm table.
1.3.6.1.4.1.164.12.3.2.1.2.1RowatmNteAlarmIfEntrynot-accessiblecurrentAn entry in the interface Alarm table.
1.3.6.1.4.1.164.12.3.2.1.2.1.1ColumnatmInterfaceActiveAlarmsread-onlycurrentA Bit String of the active alarms on this interface. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. Th…
1.3.6.1.4.1.164.12.3.2.1.2.1.2ColumnatmThresholdSectionBIPread-writecurrentWhen Section BIPs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface.
1.3.6.1.4.1.164.12.3.2.1.2.1.3ColumnatmThresholdLineBIPread-writecurrentWhen Line BIPs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface.
1.3.6.1.4.1.164.12.3.2.1.2.1.4ColumnatmThresholdLineFEBEread-writecurrentWhen Line FEBEs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface.
1.3.6.1.4.1.164.12.3.2.1.2.1.5ColumnatmThresholdPathBIPread-writecurrentWhen Path BIPs are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.6ColumnatmThresholdPathFEBEread-writecurrentWhen Path FEBEs are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.7ColumnatmThresholdErroredCellsread-writecurrentWhen Errored Cells are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.8ColumnatmThresholdLostCellsread-writecurrentWhen Lost Cells are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.9ColumnatmThresholdMisinsertedCellsread-writecurrentWhen Misinserted Cells are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.10ColumnatmInterfaceAlarmStatusread-onlycurrentThe variable is on(3) when there is any active alarm on this interface.
1.3.6.1.4.1.164.12.3.2.1.2.1.11ColumnatmInterfaceMaskAlarmsread-writecurrentA Bit String of alarms mask on this interface. An up bit (1) means that the respective alarm is masked. A down bit (0) means no mask. The mask is supported for…
1.3.6.1.4.1.164.12.3.2.1.3TableatmNteConfVpTablenot-accessiblecurrentThe ATM VP configuration table. The table is an extension to the atmVplTable of RFC-1695.
1.3.6.1.4.1.164.12.3.2.1.3.1RowatmNteConfVpEntrynot-accessiblecurrentAn entry in the ATM VP configuration table. ifIndex of the ATM layer.
1.3.6.1.4.1.164.12.3.2.1.3.1.1ColumnatmConfVpPolicingread-writecurrentPolicing method desired for this VPL.
1.3.6.1.4.1.164.12.3.2.1.3.1.2ColumnatmConfVpCCAdminStatusread-writecurrentup(2) - Activate Continuity Check (CC). down(3) - Deactivate CC. source(4) - Activate OAM CC(Continuity Check) of local agent ( start sending Oam cells to the …
1.3.6.1.4.1.164.12.3.2.1.3.1.3ColumnatmConfVpLoopbackAdminStatusread-writecurrentup(2) - Start loopback OAM cells. down(3) - Stop sending loopback OAM cells. For ace2002: up(2) - Transmitting LB cells with llid all ones (i.e. FFFF..FF) down…
1.3.6.1.4.1.164.12.3.2.1.3.1.4ColumnatmConfVpLoopbackSinkAddressread-writecurrentDestination address. For ace101: 2 bytes are used. For ace2002: 16 bytes are used.
1.3.6.1.4.1.164.12.3.2.1.3.1.5ColumnatmConfVpCongestionControlread-writecurrentEach bit indicates a selection of one option as the following description. All combinations are possible and legal. The codes are: 1 - EPD 2 - CLP 4 - EFCI
1.3.6.1.4.1.164.12.3.2.1.3.1.6ColumnatmConfVpCCDirectionread-writecurrentboth(2) - Agent send OAM CC cells and check received OAM CC cells source(4)- Agent send OAM CC cells. sink(5) - Agent checks received OAM CC cells.
1.3.6.1.4.1.164.12.3.2.1.3.1.7ColumnatmConfVpCreationTimeread-onlycurrentA date-time in which the VP was created.
1.3.6.1.4.1.164.12.3.2.1.3.1.8ColumnatmConfVpOamSupportread-writecurrentOAM support mode, which determines the device location in a segment wise.
1.3.6.1.4.1.164.12.3.2.1.3.1.9ColumnatmConfVpCCOperStatusread-onlycurrentinitial(1) - The CC activation process is not started. source(4) - Agent sends OAM CC cells. sink(5) - Agent checks received OAM CC cells. both (8) - OAM CC of…
1.3.6.1.4.1.164.12.3.2.1.3.1.10ColumnatmConfVpLoopbackTrafficread-writecurrentThis parameter has both command and status meanings: off(2) - Set to 'Off' will Stop traffic loop. Getting this value means that the loop is not running. on (3…
1.3.6.1.4.1.164.12.3.2.1.3.1.11ColumnatmConfVpLoopbackFailureIndread-writecurrentThis object allows user to define the Indication that will be created upon a LB cell failure. disabled(2) - no indication will be created. segmentAis(3) - will…
1.3.6.1.4.1.164.12.3.2.1.3.1.12ColumnatmConfVpLoopbackFailureThresholdread-writecurrentThe number of the LB failures before starting transmission of the Indication defined by atmConfVcLoopbackFailureInd. Range: 1..16. Default: 1.
1.3.6.1.4.1.164.12.3.2.1.3.1.13ColumnatmConfVpOamDirectionread-writecurrentThe direction of OAM cell insertion. downStream(2) - The OAM cell will be inserted in downStream. upStream(3) - The OAM cell will be inserted in upStream.
1.3.6.1.4.1.164.12.3.2.1.4TableatmNteConfVcTablenot-accessiblecurrentThe ATM VC configuration table. The table is an extension to the atmVclTable of RFC-1695.
1.3.6.1.4.1.164.12.3.2.1.4.1RowatmNteConfVcEntrynot-accessiblecurrentAn entry in the ATM VC configuration table. ifIndex of the ATM layer.
1.3.6.1.4.1.164.12.3.2.1.4.1.1ColumnatmConfVcPolicingread-writecurrentPolicing method desired for this VCL.
1.3.6.1.4.1.164.12.3.2.1.4.1.2ColumnatmConfVcCCAdminStatusread-writecurrentup(2) - Activate Continuity Check (CC). down(3) - Deactivate CC. source(4) - Activate OAM CC(Continuity Check) of local agent ( start sending Oam cells to the …
1.3.6.1.4.1.164.12.3.2.1.4.1.3ColumnatmConfVcLoopbackAdminStatusread-writecurrentup(2) - Start loopback OAM cells. down(3) - Stop sending loopback OAM cells. For ace2002: up(2) - Transmitting LB cells with llid all ones (i.e. FFFF..FF) down…
1.3.6.1.4.1.164.12.3.2.1.4.1.4ColumnatmConfVcLoopbackSinkAddressread-writecurrentDestination address. For ace101: 2 bytes are used. For ace2002: 16 bytes are used.
1.3.6.1.4.1.164.12.3.2.1.4.1.5ColumnatmConfVcCongestionControlread-writecurrentEach bit indicates a selection of one option as the following description. All combinations are possible and legal. The codes are: 1 - EPD 2 - CLP 4 - EFCI. Fo…
1.3.6.1.4.1.164.12.3.2.1.4.1.6ColumnatmConfVcCCDirectionread-writecurrentboth(2) - Agent send OAM CC cells and check receivev OAM CC cells source(4)- Agent send OAM CC cells. sink(5) - Agent checks received OAM CC cells.
1.3.6.1.4.1.164.12.3.2.1.4.1.7ColumnatmConfVcCreationTimeread-onlycurrentA date-time in which the VC was created.
1.3.6.1.4.1.164.12.3.2.1.4.1.8ColumnatmConfVcOamSupportread-writecurrentOAM support mode, which determines the device location in a segment wise.
1.3.6.1.4.1.164.12.3.2.1.4.1.9ColumnatmConfVcCCActivationCtrlread-writecurrentmanual(1) - CC Activation process is disable activator(2) - ACE-101 initiate CC Activation process listener(3) - ACE-101 wait to CC Activation request from rem…
1.3.6.1.4.1.164.12.3.2.1.4.1.10ColumnatmConfVcCCOperStatusread-onlycurrentinitial (1) - The CC activation process is not started. up (2) - Continuity Check (CC) activated. down (3) - CC deactivated. source (4) - OAM CC(Continuity Che…
1.3.6.1.4.1.164.12.3.2.1.4.1.11ColumnatmConfVcLoopbackTrafficread-writecurrentThis parameter has both command and status meanings: off(2) - Set to 'Off' will Stop traffic loop. Getting this value means that the loop is not running. on (3…
1.3.6.1.4.1.164.12.3.2.1.4.1.12ColumnatmConfVcLoopbackFailureIndread-writecurrentThis object allows user to define the Indication that will be created upon a LB cell failure. disabled(2) - no indication will be created. segmentAis(3) - will…
1.3.6.1.4.1.164.12.3.2.1.4.1.13ColumnatmConfVcLoopbackFailureThresholdread-writecurrentThe number of the LB failures before starting transmission of the Indication defined by atmConfVcLoopbackFailureInd. Range: 1..16. Default: 1.
1.3.6.1.4.1.164.12.3.2.1.4.1.14ColumnatmConfVcOamDirectionread-writecurrentThe direction of OAM cell insertion. downStream(2) - The OAM cell will be inserted in downStream. upStream(3) - The OAM cell will be inserted in upStream.
1.3.6.1.4.1.164.12.3.2.1.5TableatmNteAlarmVpTablenot-accessiblecurrentThe ATM VP Alarm table.
1.3.6.1.4.1.164.12.3.2.1.5.1RowatmNteAlarmVpEntrynot-accessiblecurrentAn entry in the ATM VP Alarm table. ifIndex of the ATM layer.
1.3.6.1.4.1.164.12.3.2.1.5.1.1ColumnatmNteVpAlarmVpiread-onlycurrentThe VPI on which there is an active alarm.
1.3.6.1.4.1.164.12.3.2.1.5.1.2ColumnatmNteVpActiveAlarmsread-onlycurrentA Bit String of the active alarms on this VP. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meani…
1.3.6.1.4.1.164.12.3.2.1.6TableatmNteAlarmVcTablenot-accessiblecurrentThe ATM VC Alarm table.
1.3.6.1.4.1.164.12.3.2.1.6.1RowatmNteAlarmVcEntrynot-accessiblecurrentAn entry in the ATM VC Alarm table. ifIndex of the ATM layer.
1.3.6.1.4.1.164.12.3.2.1.6.1.1ColumnatmNteVcAlarmVpiread-onlycurrentThe VPI of the VC on which there is an active alarm.
1.3.6.1.4.1.164.12.3.2.1.6.1.2ColumnatmNteVcAlarmVciread-onlycurrentThe VCI of the VC on which there is an active alarm.
1.3.6.1.4.1.164.12.3.2.1.6.1.3ColumnatmNteVcActiveAlarmsread-onlycurrentA Bit String of the active alarms on this VC. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meani…
1.3.6.1.4.1.164.12.3.2.2NodeatmNteLoopback
1.3.6.1.4.1.164.12.3.2.2.1TableatmLoopbackVpTablenot-accessiblecurrentThis table contains parameters for an OAM VP loopback test.
1.3.6.1.4.1.164.12.3.2.2.1.1RowatmLoopbackVpEntrynot-accessiblecurrentAn entry in table atmLoopbackVpTable.
1.3.6.1.4.1.164.12.3.2.2.1.1.1ColumnatmLoopbackVpIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.2.1.1.2ColumnatmLoopbackVpVpiread-onlycurrentThe VPI of the OAM VPL.
1.3.6.1.4.1.164.12.3.2.2.1.1.3ColumnatmLoopbackVpOperStatusread-onlycurrent-noActive(1) means that the loopback test has not been activated for this VP. -inProgress(2) means that the test has been activated and there is currently no p…
1.3.6.1.4.1.164.12.3.2.2.1.1.4ColumnatmLoopbackVpCDVread-onlycurrentCell Delay Variation for this sampling.
1.3.6.1.4.1.164.12.3.2.2.1.1.5ColumnatmLoopbackVpAverageDelayread-onlycurrentAverage delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.1.1.6ColumnatmLoopbackVpMaxDelayread-onlycurrentMaximum delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.1.1.7ColumnatmLoopbackVpMinDelayread-onlycurrentMinimum delay.
1.3.6.1.4.1.164.12.3.2.2.1.1.8ColumnatmLoopbackVpErrSessionsread-onlycurrentErrored Sessions. Will be updated once in 5 seconds.
1.3.6.1.4.1.164.12.3.2.2.2TableatmLoopbackVcTablenot-accessiblecurrentThis table contains parameters for an OAM VC loopback test.
1.3.6.1.4.1.164.12.3.2.2.2.1RowatmLoopbackVcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.2.2.1.1ColumnatmLoopbackVcIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.2.2.1.2ColumnatmLoopbackVcVpiread-onlycurrentThe VPI of the OAM VCL.
1.3.6.1.4.1.164.12.3.2.2.2.1.3ColumnatmLoopbackVcVciread-onlycurrentThe VCI of the OAM VCL.
1.3.6.1.4.1.164.12.3.2.2.2.1.4ColumnatmLoopbackVcOperStatusread-onlycurrent-noActive(1) means that the loopback test has not been activated for this VP. -inProgress(2) means that the test has been activated and there is currently no p…
1.3.6.1.4.1.164.12.3.2.2.2.1.5ColumnatmLoopbackVcCDVread-onlycurrentCell Delay Variation for this sampling.
1.3.6.1.4.1.164.12.3.2.2.2.1.6ColumnatmLoopbackVcAverageDelayread-onlycurrentAverage delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.2.1.7ColumnatmLoopbackVcMaxDelayread-onlycurrentThe maximum delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.2.1.8ColumnatmLoopbackVcMinDelayread-onlycurrentThe minimum delay.
1.3.6.1.4.1.164.12.3.2.2.2.1.9ColumnatmLoopbackVcErrSessionsread-onlycurrentErrored Sessions. Will be updated once in 5 seconds.
1.3.6.1.4.1.164.12.3.2.2.3TableatmLoopbackVpIvlTablenot-accessiblecurrentThis table contains parameters for an OAM VP loopback test, according interval number.
1.3.6.1.4.1.164.12.3.2.2.3.1RowatmLoopbackVpIvlEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.2.3.1.1ColumnatmLoopbackVpIvlIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.2.3.1.2ColumnatmLoopbackVpIvlVpiread-onlycurrentThe VPI of the OAM VPL.
1.3.6.1.4.1.164.12.3.2.2.3.1.3ColumnatmLoopbackVpIvlIvlread-onlycurrentThe relevant interval number.
1.3.6.1.4.1.164.12.3.2.2.3.1.4ColumnatmLoopbackVpIvlOperStatusread-onlycurrent-noActive(1) means that the loopback test has not been activated for this VP during this interval. -inProgress(2) has no meaning for an ended interval. -failed…
1.3.6.1.4.1.164.12.3.2.2.3.1.5ColumnatmLoopbackVpIvlCDVread-onlycurrentCell Delay Variation for this interval.
1.3.6.1.4.1.164.12.3.2.2.3.1.6ColumnatmLoopbackVpIvlAverageDelayread-onlycurrentAverage delay without including lost cells for this interval.
1.3.6.1.4.1.164.12.3.2.2.3.1.7ColumnatmLoopbackVpIvlMaxDelayread-onlycurrentThe maximum delay without including lost cells for this interval.
1.3.6.1.4.1.164.12.3.2.2.3.1.8ColumnatmLoopbackVpIvlMinDelayread-onlycurrentThe minimum delay for this interval.
1.3.6.1.4.1.164.12.3.2.2.3.1.9ColumnatmLoopbackVpIvlErrSessionsread-onlycurrentErrored Sessions. Will be updated once in 5 seconds.
1.3.6.1.4.1.164.12.3.2.2.4TableatmLoopbackVcIvlTablenot-accessiblecurrentThis table contains parameters for an OAM VC loopback test.
1.3.6.1.4.1.164.12.3.2.2.4.1RowatmLoopbackVcIvlEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.2.4.1.1ColumnatmLoopbackVcIvlIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.2.4.1.2ColumnatmLoopbackVcIvlVpiread-onlycurrentThe VPI of the OAM VCL.
1.3.6.1.4.1.164.12.3.2.2.4.1.3ColumnatmLoopbackVcIvlVciread-onlycurrentThe VCI of the OAM VCL.
1.3.6.1.4.1.164.12.3.2.2.4.1.4ColumnatmLoopbackVcIvlIvlread-onlycurrentThe relevant interval number.
1.3.6.1.4.1.164.12.3.2.2.4.1.5ColumnatmLoopbackVcIvlOperStatusread-onlycurrent-noActive(1) means that the loopback test has not been activated for this VC during this interval. -inProgress(2) has no meaning per interval. -failed(3) means…
1.3.6.1.4.1.164.12.3.2.2.4.1.6ColumnatmLoopbackVcIvlCDVread-onlycurrentCell Delay Variation for this interval.
1.3.6.1.4.1.164.12.3.2.2.4.1.7ColumnatmLoopbackVcIvlAverageDelayread-onlycurrentAverage delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.4.1.8ColumnatmLoopbackVcIvlMaxDelayread-onlycurrentThe maximum delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.4.1.9ColumnatmLoopbackVcIvlMinDelayread-onlycurrentThe minimum delay.
1.3.6.1.4.1.164.12.3.2.2.4.1.10ColumnatmLoopbackVcIvlErrSessionsread-onlycurrentErrored Sessions. Will be updated once in 5 seconds.
1.3.6.1.4.1.164.12.3.2.3NodeatmNtePM
1.3.6.1.4.1.164.12.3.2.3.1TableatmVpPmTablenot-accessiblecurrentThis table contains parameters for VP performance monitoring.
1.3.6.1.4.1.164.12.3.2.3.1.1RowatmVpPmEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.3.1.1.1ColumnatmVpPmIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.3.1.1.2ColumnatmVpPmVpiread-onlycurrentThe VPI of the Performance Monitoring VPL.
1.3.6.1.4.1.164.12.3.2.3.1.1.3ColumnatmVpPmAdminStatusread-createcurrentup(2) - Activate PM. down(3) - Deactivate PM. listenToActivationCells(4) - . originateActivationCells(5) - .
1.3.6.1.4.1.164.12.3.2.3.1.1.4ColumnatmVpPmDirectionread-createcurrentThe direction of PM.
1.3.6.1.4.1.164.12.3.2.3.1.1.5ColumnatmVpPmBlockSizeread-createcurrentValid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768.
1.3.6.1.4.1.164.12.3.2.3.1.1.6ColumnatmVpPmRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.2.3.1.1.7ColumnatmVpPmSinkread-createcurrentoff (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.
1.3.6.1.4.1.164.12.3.2.3.1.1.8ColumnatmVpPmSourceread-createcurrentoff (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.
1.3.6.1.4.1.164.12.3.2.3.2TableatmVcPmTablenot-accessiblecurrentThis table contains parameters for VC performance monitoring.
1.3.6.1.4.1.164.12.3.2.3.2.1RowatmVcPmEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.3.2.1.1ColumnatmVcPmIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.3.2.1.2ColumnatmVcPmVpiread-onlycurrentThe VPI of the Performance Monitoring VCL.
1.3.6.1.4.1.164.12.3.2.3.2.1.3ColumnatmVcPmVciread-onlycurrentThe VCI of the PM VCL.
1.3.6.1.4.1.164.12.3.2.3.2.1.4ColumnatmVcPmAdminStatusread-createcurrentup(2) - Activate PM. down(3) - Deactivate PM. listenToActivationCells(4) - . originateActivationCells(5) - .
1.3.6.1.4.1.164.12.3.2.3.2.1.5ColumnatmVcPmDirectionread-createcurrentThe direction of PM.
1.3.6.1.4.1.164.12.3.2.3.2.1.6ColumnatmVcPmBlockSizeread-createcurrentValid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768.
1.3.6.1.4.1.164.12.3.2.3.2.1.7ColumnatmVcPmRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.2.3.2.1.8ColumnatmVcPmSinkread-createcurrentoff (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.
1.3.6.1.4.1.164.12.3.2.3.2.1.9ColumnatmVcPmSourceread-createcurrentoff (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.
1.3.6.1.4.1.164.12.5NoderadAtmIma
1.3.6.1.4.1.164.12.5.1ScalarimaPrimaryClkread-writecurrentClock source to be transmitted to the user side, where user module is in 'External' clock source.
1.3.6.1.4.1.164.12.5.2TableimaXLinkTablenot-accessiblecurrentThe IMA Link Status and Configuration table. This table contains additional objects for the link table.
1.3.6.1.4.1.164.12.5.2.1RowimaXLinkEntrynot-accessiblecurrentAn entry in the IMA Link table.
1.3.6.1.4.1.164.12.5.2.1.1ColumnimaLinkDirectionread-writecurrentthe Link direction.
1.3.6.1.4.1.164.12.5.2.1.2ColumnimaLinkItcLBClkSrcread-writecurrentClock source for the current Tx-line.
1.3.6.1.4.1.164.12.5.3TableimaXGroupTablenot-accessiblecurrentThe IMA group Status and Configuration table. This table contains additional objects for the Group table.
1.3.6.1.4.1.164.12.5.3.1RowimaXGroupEntrynot-accessiblecurrentAn entry in the IMA Group table.
1.3.6.1.4.1.164.12.5.3.1.1ColumnimaGroupVersionread-writecurrentIMA Version.
1.3.6.1.4.1.164.12.5.3.1.2ColumnimaGroupCtcTxClkSrcread-writecurrentThe source of the transmited, common, Clock Source. Applicable if imaGroupNeTxClkMode=ctc(1). Automatic - Dynamic source, taken from the currently reference li…
1.3.6.1.4.1.164.12.7NodeatmLayer2
1.3.6.1.4.1.164.12.7.1TableatmLayer2XVclTablenot-accessiblecurrentThis table is an extension of VCL table, which is created for each LAN VCC.
1.3.6.1.4.1.164.12.7.1.1RowatmLayer2XVclEntrynot-accessiblecurrentConceptual row in atmVclTable. This table augments the RFC2515 VCL table.
1.3.6.1.4.1.164.12.7.1.1.1ColumnatmLayer2XVclConnModeread-createcurrentEach valid LAN VCC is either Main or Sub. This parameter is configured only once on creation of a LAN VCC. It can not be changed after creation. In order to ch…
1.3.6.1.4.1.164.12.7.1.1.2ColumnatmLayer2XVclGroupIdxread-onlycurrentThe group identifier. A VCC Group identifier = 0 if the VCC was not associated with a group yet. This value is updated according to the group identifier set by…
1.3.6.1.4.1.164.12.7.2TableatmLayer2GroupTablenot-accessiblecurrentThis table contains groups and their members. A group is a bundle of VCCs, which acts as different queues. Main and Sub VCCs should have the same ATM slot and …
1.3.6.1.4.1.164.12.7.2.1RowatmLayer2GroupEntrynot-accessiblecurrentConceptual row in atmLayer2GroupTable. The indexes: ifIndex, atmVclVpi and atmVclVci indicate the Network ATM End-Point. Upon a group creation, one Main VCC mu…
1.3.6.1.4.1.164.12.7.2.1.1ColumnatmLayer2GroupIdxread-onlycurrentThe group identifier. 0 is not a valid index.
1.3.6.1.4.1.164.12.7.2.1.2ColumnatmLayer2GroupRowStatusread-createcurrentCreation/Deletion of rows in the table, and indication of the entry's status.
1.3.6.1.4.1.164.12.7.2.1.3ColumnatmLayer2GroupConnModeread-onlycurrentEach valid LAN VCC is either Main or Sub as configured in atmLayer2XVclTable.
1.3.6.1.4.1.164.12.7.2.1.4ColumnatmLayer2GroupConnPriorityread-onlycurrentThis parameter is configured by atmLayer2PriorityRx from atmLayer2PriorityTable. Each bit in the Octet represents a specific priority as follows: MSB 7 6 5 4 3…
1.3.6.1.4.1.164.12.7.2.1.5ColumnatmLayer2GroupNameread-createcurrentGroup name. Configured by the user. The name is unique per system. For atmLayer2GroupIdx=0, the name will be null.
1.3.6.1.4.1.164.12.7.3TableatmLayer2PriorityTablenot-accessiblecurrentThis table maps all priorities inside a group. Several priorities might be mapped to the same VCC. Upon priority change, the agent will update the VCCs of the …
1.3.6.1.4.1.164.12.7.3.1RowatmLayer2PriorityEntrynot-accessiblecurrentConceptual row in atmLayer2PriorityTable. Each entry is a Network ATM End-Point per priority. Upon a group creation, all priorities are mapped to the Main VCC.…
1.3.6.1.4.1.164.12.7.3.1.1ColumnatmLayer2PriorityGroupIdxread-onlycurrentThe group identifier.
1.3.6.1.4.1.164.12.7.3.1.2ColumnatmLayer2PriorityRxread-onlycurrentThe priority values. The used values are 0-7, but since this value is part of the index of the table, and in order to avoid '0' as an index, the index syntax i…
1.3.6.1.4.1.164.12.7.3.1.3ColumnatmLayer2PriorityIfIndexread-createcurrentATM ifIndex of the network End-Point.
1.3.6.1.4.1.164.12.7.3.1.4ColumnatmLayer2PriorityVclVpiread-createcurrentVpi of the network End-Point.
1.3.6.1.4.1.164.12.7.3.1.5ColumnatmLayer2PriorityVclVciread-createcurrentVci of the network End-Point.
1.3.6.1.4.1.164.12.7.4ScalaratmLayer2GroupIndexNextread-onlycurrentThis object contains an appropriate value to be used for atmLayer2GroupIdx when creating entries in the atmLayer2GroupTable. The value 0 indicates that no unas…
1.3.6.1.4.1.164.12.8NoderadAtmFr
1.3.6.1.4.1.164.12.8.1TablefrAtmIwfXConnectionTablenot-accessiblecurrentThis table is an extension of frAtmIwfXConnectionTable from RFC2955.
1.3.6.1.4.1.164.12.8.1.1RowfrAtmIwfXConnectionEntrynot-accessiblecurrentConceptual row in frAtmIwfXConnectionTable. This table augments the RFC2955.
1.3.6.1.4.1.164.12.8.1.1.1ColumnfrAtmIwfXConnModeread-createcurrentFR IWF Mode. service - Service InterWorking (FRF.8), network - Network InterWorking (FRF.5).
1.3.6.1.4.1.164.12.8.1.1.2ColumnfrAtmIwfXConnSscsDlciread-createcurrentThis parameter is relevant for frAtmIwfXConnMode=network (FRF.5) only. This parameter allow configuration of the FR SSCS DLCI that is transferred to the remote…
1.3.6.1.4.1.164.20NoderadExperimental
MIB Viewer