CADANT-CMTS-SYSTEM-MIB
348 objects
Arris E6000 system parameters and constants
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4998.1.1.5.1 | IdentitycadSystemMib | Arris E6000 system parameters and constants | ||
| 1.3.6.1.4.1.4998.1.1.5.1.1 | NodecadSysParams | |||
| 1.3.6.1.4.1.4998.1.1.5.1.1.1 | ScalarcadSysSyncInterval | read-only | current | Nominal time between transmission of SYNC messages. (ref 6.3.2) |
| 1.3.6.1.4.1.4998.1.1.5.1.1.2 | ScalarcadSysUCDInterval | read-only | current | Time between transmission of UCD messages. (ref 6.3.3) |
| 1.3.6.1.4.1.4998.1.1.5.1.1.3 | ScalarcadSysMaxMAPPending | read-only | current | The number of mini-slots that a CMTS is allowed to map into the future. (ref 6.3.4) |
| 1.3.6.1.4.1.4998.1.1.5.1.1.4 | ScalarcadSysRangingInterval | read-only | current | Time between transmission of broadcast Ranging requests. (ref 7.3.3) |
| 1.3.6.1.4.1.4998.1.1.5.1.1.5 | ScalarcadSysInvitedRangingRetries | read-only | current | Number of retries on inviting ranging requests. (ref 9.2.4) |
| 1.3.6.1.4.1.4998.1.1.5.1.1.6 | ScalarcadSysRegistrationRequestRetries | read-only | current | Number of retries on registration requests/responses. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.7 | ScalarcadSysCMMAPProcessingTime | read-only | current | Time provided between arrival of the last bit of a MAP at a CM and effectiveness of that MAP. (ref 7.1.1) |
| 1.3.6.1.4.1.4998.1.1.5.1.1.8 | ScalarcadSysCMRangingResponseProcessingTime | read-only | current | Minimum tile allowed fro a CM following receipt of a rangin response before it is expected to reply to an invited ranging request. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.9 | ScalarcadSysCMConfiguration | read-write | current | Maximum time allowed for a CM, following receipt of a configuration file, to send a Registration Request to a CMTS. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.10 | ScalarcadSysT5Timeout | read-only | current | Wait for Upstream CHannel Change response. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.11 | ScalarcadSysT6Timeout | read-only | current | Wait for REG-RSP and REG-ACK |
| 1.3.6.1.4.1.4998.1.1.5.1.1.12 | ScalarcadSysMiniSlotSize | read-only | current | Size of mini-slotfor upstream transmission. Must be a power of 2 (in units of the Timebase Tick). |
| 1.3.6.1.4.1.4998.1.1.5.1.1.13 | ScalarcadSysDSxRequestRetries | read-only | current | Number of Timeout Retries on DSA/DSC/DSD Requests. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.14 | ScalarcadSysDSxResponseRetries | read-only | current | Number of Timeout Retries on DSA/DSC/DSD Responses. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.15 | ScalarcadSysT7Timeout | read-only | current | Wait for DSA/DSC/DSD Response timeout. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.16 | ScalarcadSysT8Timeout | read-only | current | Wait for DSA/DSC/DSD Acknowledge timeout. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.17 | ScalarcadSysT9Timeout | read-only | current | Registration timeout, the time allowed between the CMTS sending a RNG-RSP(success) to a CM, and receiving a REG-REQ from that same CM. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.18 | ScalarcadSysT10Timeout | read-only | current | Wait for Transaction End timeout. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.19 | ScalarcadSysT11Timeout | read-only | current | Wait for a DCC Response on the old channel. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.20 | ScalarcadSysT13Timeout | read-only | current | Maximum holding time for QOS resources for DCC. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.21 | ScalarcadSysDCCREQRetries | read-only | current | Number of retries on Dynamic Channel Change Request. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.22 | ScalarcadSysMICEnable | read-write | current | Enable MIC checking on the CMTS. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.23 | ScalarcadSysMICAuthString | read-write | current | Encrypted MIC Authentication |
| 1.3.6.1.4.1.4998.1.1.5.1.1.24 | ScalarcadSysAutoRecoveryEnable | read-write | current | Enable automatic recovery of card/port/software in case of component failure. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.25 | ScalarcadSysActiveIpAddress | read-write | current | Ip Address of the active control complex. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.26 | ScalarcadSysSpOperMode | read-write | current | Special operational mode. Value of 1 indicates the mode is enabled. dqossf10cms - Allow 1.0 CMs to be stored in DocsQosServiceFlowEntry adjrxpwrctl - Allow rx … |
| 1.3.6.1.4.1.4998.1.1.5.1.1.27 | ScalarcadSysCountsCollectionRate | read-write | current | The period, in minutes, in which every count in the CMTS is to be collected. If this object is set to 0, counts collection will be disabled. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.28 | ScalarcadSysMaxQoSActiveTimeout | read-write | current | Defines the maximum QoS Active Timeout the E6000 is willing to allow. If a larger value is received in a CM request the E6000 will return this value instead in… |
| 1.3.6.1.4.1.4998.1.1.5.1.1.29 | ScalarcadSysMaxQoSAdmittedTimeout | read-write | current | Defines the maximum QoS Admitted Timeout the E6000 is willing to allow. If a larger value is received in a CM request the E6000 will return this value instead … |
| 1.3.6.1.4.1.4998.1.1.5.1.1.30 | ScalarcadSysAllow10CmConcatenation | read-write | current | Defines whether or not the E6000 will allow a modem operating in DOCSIS 1.0 mode to utilize concatenation. If this value is false and a modem operating in 1.0 … |
| 1.3.6.1.4.1.4998.1.1.5.1.1.31 | ScalarcadSysAllow10CmFragmentation | read-write | current | Defines whether or not the E6000 will allow a modem operating in DOCSIS 1.0 mode to utilize fragmentation. If this value is false and a modem operating in 1.0 … |
| 1.3.6.1.4.1.4998.1.1.5.1.1.32 | ScalarcadSysPercentAddtlDsBwAllocated | read-write | current | This value of this setting is used to make a percentage increase to a dynamic downstream service flows maximum traffic rate. This is flexiblity actually causes… |
| 1.3.6.1.4.1.4998.1.1.5.1.1.33 | ScalarcadSysMaxTrafBurstFor11CMs | read-write | current | This is the default value that will be used to populate the Maximum Traffic Burst for a 1.1 modem unless the maximum traffic burst TLV is explicitly provided i… |
| 1.3.6.1.4.1.4998.1.1.5.1.1.34 | ScalarcadSysFanSpeedControlEnable | read-write | obsolete | Enable automatic fan speed control. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.35 | ScalarcadSysFlaplistPowerAdjustThreshold | read-write | current | The threshold is used to monitor the power adjust in the flap list. For a range request received that results in a power adjust exceeding the threshold value w… |
| 1.3.6.1.4.1.4998.1.1.5.1.1.36 | ScalarcadSysRemoteFSEnable | read-write | current | Indicates whether the active SCM should allow mounting the the filesystems of the standby SCM. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.37 | ScalarcadSysRemotePortEnable | read-write | current | Indicates whether the active SCM should allow redirection of the serial console of the standby SCM. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.38 | ScalarcadSysTcpSmoothingValue1D8U | read-write | current | TCP smoothing value to be programmed into hardware on 1D8U CAMs. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.39 | ScalarcadSysTcpSmoothingValue2D12U | read-write | current | TCP smoothing value to be programmed into hardware on 2D12U CAMs. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.40 | ScalarcadSysModemLossThreshold | read-write | deprecated | Minimum modem threshold triggering detection of an upstream channel lockup. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.41 | ScalarcadSysPeakTrafRateFor11CMs | read-write | obsolete | This is the default value that will be used to populate the Peak Traffic Rate for a 1.1 modem configuration file unless the peak traffic rate is explicitly pro… |
| 1.3.6.1.4.1.4998.1.1.5.1.1.44 | ScalarcadSysCpeHostAuthorization | read-write | current | This variable enables the CPE Host Authorization feature. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.46 | ScalarcadSysMaxUcdBurstLength | read-write | current | This variable limits the maximum UCD burst length. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.47 | ScalarcadSysLO1LeakDetect | read-write | current | This variable controls LO1 leak detection on the DMM. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.48 | ScalarcadMtcmConditionalOverride | read-write | current | If set to 'true', for a MAC Domain configured for MTCM enabled operation, the E6000 will set a registering MTCM-capable CM to be MTCM disabled (via REG-RSP mes… |
| 1.3.6.1.4.1.4998.1.1.5.1.1.49 | ScalarcadSysDelayedCpeLearning | read-write | current | This setting only applies to modems that have BPI enabled. When set to false(2), CPE learning is enabled during registration when BPI initialization is initiat… |
| 1.3.6.1.4.1.4998.1.1.5.1.1.52 | ScalarcadSysModPriDsInRccEnabled | read-write | current | Enable modifying primary Downstream channel in RCC of Reg-Rsp-MP. Refer ECN 690. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.53 | ScalarcadSysSendTccRefIdPerFragment | read-write | current | Settings for sending the Transmit Channel Configuration (TCC) Reference sub-type 46.1 for type 46 TCC fragmentation. If 'true', sends 46.1 Ref ID in every type… |
| 1.3.6.1.4.1.4998.1.1.5.1.1.54 | ScalarcadSysPeakTrRateUpstream | read-write | current | This object enables support for Peak Traffic Rate in the upstream direction. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.55 | ScalarcadSysAllowAmbiguityOverride | read-write | current | This object enables ambiguity resolution channel-override actions. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.56 | ScalarcadSysUnicastNpUsAcquisition | read-write | current | This object enables unicast non-primary upstream channel acquisition. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.57 | ScalarcadSysMacMoveBlockedOnRcptDhcpPkt | read-write | current | MAC movement is blocked on receipt of DHCP packets |
| 1.3.6.1.4.1.4998.1.1.5.1.1.58 | ScalarcadSysTftpProxy | read-write | current | This parameter provides a global enable for the TFTP Enforce and Dynamic Shared Secret features. In order for the cadIfMacDomainTftpEnforce and cadIfMacDomainD… |
| 1.3.6.1.4.1.4998.1.1.5.1.1.59 | ScalarcadSysFanSpeedLevel | read-write | current | Set the fan speed for the chassis. |
| 1.3.6.1.4.1.4998.1.1.5.1.1.60 | ScalarcadSys1x1onCmAcPwrLossEnabled | read-write | current | This object enables/disables the CMTS reaction to a AC Power Loss CM-STATUS. If true, the CMTS will wait until cadSys1x1onCmAcPwrLossHoldoff expires, and then … |
| 1.3.6.1.4.1.4998.1.1.5.1.1.61 | ScalarcadSysFlapListInsertionThreshold | read-write | current | This object shows the number of seconds between successive ranging attempts that must pass before the modem is counted as flapped. The modem must have also bee… |
| 1.3.6.1.4.1.4998.1.1.5.1.1.62 | ScalarcadSysAES128Enable | read-write | current | Enables AES-128 Cryptography Suite for BPI+ when true. |
| 1.3.6.1.4.1.4998.1.1.5.1.2 | NodecadSysSystem | |||
| 1.3.6.1.4.1.4998.1.1.5.1.2.1 | ScalarcadSysContact | read-only | current | The textual identification of the contact person for this managed node, together with information on how to contact this person. If no contact information is k… |
| 1.3.6.1.4.1.4998.1.1.5.1.2.2 | ScalarcadSysName | read-only | current | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. If the name is unknown, the value is th… |
| 1.3.6.1.4.1.4998.1.1.5.1.2.3 | ScalarcadSysLocation | read-only | current | The physical location of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string. |
| 1.3.6.1.4.1.4998.1.1.5.1.3 | NodecadSysControl | |||
| 1.3.6.1.4.1.4998.1.1.5.1.3.1 | ScalarcadSysWriteMem | read-write | current | This variable always returns FALSE upon reading. When set to TRUE, the configuration data currently resident in volatile memory (RAM) is written to persistent … |
| 1.3.6.1.4.1.4998.1.1.5.1.3.2 | ScalarcadSysEraseMem | read-write | current | This variable always returns FALSE upon reading. When set to TRUE, the configuration data currently resident in persistent memory (NVRAM) is erased. |
| 1.3.6.1.4.1.4998.1.1.5.1.4 | NodecadSysSnmp | |||
| 1.3.6.1.4.1.4998.1.1.5.1.4.1 | ScalarcadSysEnableAuthenTraps | read-write | current | Indicates whether the SNMP entity is permitted to generate authentication traps. |
| 1.3.6.1.4.1.4998.1.1.5.1.4.2 | ScalarcadSysSnmpReadAheadMax | read-write | current | This value is the maximum number of records to read ahead |
| 1.3.6.1.4.1.4998.1.1.5.1.4.3 | ScalarcadSysSnmpRefreshTime | read-write | current | This value represents how old a database record can be to be used. |
| 1.3.6.1.4.1.4998.1.1.5.1.4.4 | TablecadSnmpRemoteEngineTable | not-accessible | deprecated | Table containing information of remote SNMP engines. |
| 1.3.6.1.4.1.4998.1.1.5.1.4.4.1 | RowcadSnmpRemoteEngineEntry | not-accessible | current | Entry containing information of remote SNMP engines. |
| 1.3.6.1.4.1.4998.1.1.5.1.4.4.1.1 | ColumncadSnmpRemoteEngineIpAddress | not-accessible | current | The IP address of a remote SNMP engine with which this user can communicate. |
| 1.3.6.1.4.1.4998.1.1.5.1.4.4.1.2 | ColumncadSnmpRemoteEnginePortNumber | not-accessible | current | The UDP port of a remote SNMP engine with which this user can communicate. |
| 1.3.6.1.4.1.4998.1.1.5.1.4.4.1.3 | ColumncadSnmpRemoteEngineID | read-create | deprecated | An SNMP engine's administratively-unique identifier of a remote SNMP engine with which this user can communicate. |
| 1.3.6.1.4.1.4998.1.1.5.1.4.4.1.4 | ColumncadSnmpRemoteUserName | read-create | current | A human readable string representing the name of the user of a remote SNMP engine. |
| 1.3.6.1.4.1.4998.1.1.5.1.4.4.1.5 | ColumncadSnmpRemoteEngineType | read-only | current | The type to indicate the remote engineID is manually configured or internally detected via SNMP V3 Informs probe response. |
| 1.3.6.1.4.1.4998.1.1.5.1.4.4.1.6 | ColumncadSnmpRemoteEngineStatus | read-create | current | The status of this conceptual row. |
| 1.3.6.1.4.1.4998.1.1.5.1.5 | NodecadSysBootParams | |||
| 1.3.6.1.4.1.4998.1.1.5.1.5.1 | ScalarcadSysBootMacAddress | read-only | current | Mac address of system controller |
| 1.3.6.1.4.1.4998.1.1.5.1.5.2 | ScalarcadSysBootFpIpAddress | read-write | current | Ip address of E6000 front panel ethernet port |
| 1.3.6.1.4.1.4998.1.1.5.1.5.3 | ScalarcadSysBootFpSubnetMask | read-write | current | E6000 front port interface subnet mask |
| 1.3.6.1.4.1.4998.1.1.5.1.5.6 | ScalarcadSysBootDefaultGateway | read-write | current | Default gateway |
| 1.3.6.1.4.1.4998.1.1.5.1.5.7 | ScalarcadSysBootTimeOffset | read-only | current | Time offset (seconds) from UTC |
| 1.3.6.1.4.1.4998.1.1.5.1.5.8 | ScalarcadSysBootTimeServer | read-only | current | Ip address of TOD server |
| 1.3.6.1.4.1.4998.1.1.5.1.5.9 | ScalarcadSysBootTimeServerConnType | read-only | current | Protocol (tcp/udp) used to connect to TOD server |
| 1.3.6.1.4.1.4998.1.1.5.1.5.10 | ScalarcadSysBootStartupApplication | read-only | current | Startup mode of the E6000 |
| 1.3.6.1.4.1.4998.1.1.5.1.5.11 | ScalarcadSysBootStartupDelay | read-only | current | Delay (in seconds) allowing changes before booting application |
| 1.3.6.1.4.1.4998.1.1.5.1.5.12 | ScalarcadSysBootSelection | read-only | current | Bootloader to use (1 or 2) |
| 1.3.6.1.4.1.4998.1.1.5.1.5.13 | ScalarcadSysBootBaud | read-only | deprecated | Baud rate of front panel serial port |
| 1.3.6.1.4.1.4998.1.1.5.1.5.15 | ScalarcadSysBootFpBIpAddress | read-write | current | Ip address of E6000 side B front panel ethernet port |
| 1.3.6.1.4.1.4998.1.1.5.1.5.16 | ScalarcadSysBootParity | read-only | current | Serial parity of console port. Valid values are N (no parity), E (even parity), and O (odd parity). |
| 1.3.6.1.4.1.4998.1.1.5.1.6 | NodecadSysReload | |||
| 1.3.6.1.4.1.4998.1.1.5.1.6.1 | ScalarcadSysReloadOperation | read-write | current | Control object for E6000 reload, reading this object always returns none(99) |
| 1.3.6.1.4.1.4998.1.1.5.1.6.2 | ScalarcadSysReloadImageName | read-write | current | Image name to use in reloadImage operation |
| 1.3.6.1.4.1.4998.1.1.5.1.6.3 | ScalarcadSysReloadStatus | read-only | current | Status object for E6000 reload |
| 1.3.6.1.4.1.4998.1.1.5.1.6.4 | ScalarcadSysReloadStatusDescription | read-write | current | Textual description of reload status |
| 1.3.6.1.4.1.4998.1.1.5.1.6.5 | ScalarcadSysReloadPatchName | read-write | current | Patch image name to use in patch operations |
| 1.3.6.1.4.1.4998.1.1.5.1.7 | NodecadSysImage | |||
| 1.3.6.1.4.1.4998.1.1.5.1.7.1 | ScalarcadSysImageFile | read-only | current | Image filename for current E6000 image |
| 1.3.6.1.4.1.4998.1.1.5.1.7.2 | ScalarcadSysImageId | read-only | current | Image identifier for current E6000 image |
| 1.3.6.1.4.1.4998.1.1.5.1.7.3 | ScalarcadSysImageName | read-only | current | Image name for current E6000 image |
| 1.3.6.1.4.1.4998.1.1.5.1.7.4 | ScalarcadSysImageComponentCount | read-only | current | Image component count for current E6000 image |
| 1.3.6.1.4.1.4998.1.1.5.1.8 | NodecadSysDictionary | |||
| 1.3.6.1.4.1.4998.1.1.5.1.8.1 | TablecadSysDictionaryTable | not-accessible | current | Table describing internal state of database. |
| 1.3.6.1.4.1.4998.1.1.5.1.8.1.1 | RowcadSysDictionaryEntry | not-accessible | current | Describes the internal state of an individual table. |
| 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.1 | ColumncadSysDictionaryTableId | not-accessible | current | Internal identifier for this MIB data. |
| 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.2 | ColumncadSysDictionaryName | read-only | current | Internal name for this MIB data. |
| 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.3 | ColumncadSysDictionaryDynamic | read-only | current | Indicates whether table is persistent or volatile only. |
| 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.4 | ColumncadSysDictionaryNumberEntries | read-only | current | Current number of rows contained in the MIB table. |
| 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.5 | ColumncadSysDictionaryCurrentVer | read-only | current | Current internal dynamic version number of the MIB table. |
| 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.6 | ColumncadSysDictionaryPersistentVer | read-only | current | Current internal version number of the MIB table on flash. |
| 1.3.6.1.4.1.4998.1.1.5.1.8.1.1.7 | ColumncadSysDictionaryModuleVer | read-only | current | Current internal version number of the schema of the MIB table. |
| 1.3.6.1.4.1.4998.1.1.5.1.9 | NodecadSysConfiguration | |||
| 1.3.6.1.4.1.4998.1.1.5.1.9.1 | ScalarcadSysConfigSaveTime | read-only | current | The date and time of the last write of the configuration to nvram. |
| 1.3.6.1.4.1.4998.1.1.5.1.10 | NodecadCosToQosMapping | |||
| 1.3.6.1.4.1.4998.1.1.5.1.10.9 | TablecadCosToQosMappingTable | not-accessible | current | Table of COS to QOS Mapping data |
| 1.3.6.1.4.1.4998.1.1.5.1.10.9.1 | RowcadCosToQosMappingEntry | not-accessible | current | This entry contains all of the data to map 1.0 COS to 1.1 QOS parameters. |
| 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.1 | ColumncadCosToQosMappingIndex | not-accessible | current | The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMaxTrafficBurst |
| 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.2 | ColumncadCosUpMaxTrafficBurst | read-write | current | The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMaxTrafficBurst |
| 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.3 | ColumncadCosDnMaxTrafficBurst | read-write | current | The downstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMaxTrafficBurst |
| 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.4 | ColumncadCosDnMinReservedRate | read-write | current | The downstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMinReservedRate |
| 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.5 | ColumncadCosUpMinReservedPkt | read-write | current | The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMinReservedPkt |
| 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.6 | ColumncadCosDnMinReservedPkt | read-write | current | The downstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMinReservedPkt |
| 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.7 | ColumncadCosUpTosAndMask | read-write | current | The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetTosAndMask |
| 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.8 | ColumncadCosUpTosOrMask | read-write | current | The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetTosOrMask |
| 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.9 | ColumncadCosDnMaxLatency | read-write | current | The upstream 1.0 equivalent of the (1.1) DOCS-QOS3-MIB object docsQosParamSetMaxLatency |
| 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.10 | ColumncadCosDnPriority | read-write | current | The downstream channel priority to use. A -1 indicates that the current method of using the upstream channel priority should be used. |
| 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.11 | ColumncadCosDnPeakTrafficRate | read-write | current | Peak traffic rate shaped to while traffic still conforms to the policing parameters (Tmax and Burst). If the peak rate is set to a value greater than Tmax, the… |
| 1.3.6.1.4.1.4998.1.1.5.1.10.9.1.12 | ColumncadCosUpPeakTrafficRate | read-write | current | Peak traffic rate shaped to while traffic still conforms to the policing parameters (Tmax and Burst). If the peak rate is set to a value greater than Tmax, the… |
| 1.3.6.1.4.1.4998.1.1.5.1.11 | NodecadSysKeyChain | |||
| 1.3.6.1.4.1.4998.1.1.5.1.11.1 | TablecadSysKeyChainKeyTable | not-accessible | current | Table describing key-chain key provisioned data. |
| 1.3.6.1.4.1.4998.1.1.5.1.11.1.1 | RowcadSysKeyChainKeyEntry | not-accessible | current | Describes the provisioned data for a key in a key-chain. |
| 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.1 | ColumncadSysKeyChainName | not-accessible | current | The key-chain name. |
| 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.2 | ColumncadSysKeyChainKeySequenceId | not-accessible | current | The sequence id of the key. |
| 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.3 | ColumncadSysKeyChainKey | read-create | current | The key string. |
| 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.4 | ColumncadSysKeyChainKeyAcceptStartTime | read-create | current | The start time when this key is valid for received packets. |
| 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.5 | ColumncadSysKeyChainKeyAcceptStopTime | read-create | current | The stop time when this key is no longer valid for received packets. |
| 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.6 | ColumncadSysKeyChainKeyAcceptInfiniteLifetime | read-create | current | If this value is set to true, the key has an infinite lifetime for received packets. Otherwise use the accept start and stop time to determine the lifetime. |
| 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.7 | ColumncadSysKeyChainKeySendStartTime | read-create | current | The start time when this key is valid for sending packets. |
| 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.8 | ColumncadSysKeyChainKeySendStopTime | read-create | current | The stop time when this key is no longer valid for sending packets. |
| 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.9 | ColumncadSysKeyChainKeySendInfiniteLifetime | read-create | current | If this value is set to true, the key has an infinite lifetime for sending packets. Otherwise use the send start and stop time to determine the lifetime. |
| 1.3.6.1.4.1.4998.1.1.5.1.11.1.1.10 | ColumncadSysKeyChainKeyRowStatus | read-create | current | The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following stat… |
| 1.3.6.1.4.1.4998.1.1.5.1.12 | NodecadSystemMibConformance | |||
| 1.3.6.1.4.1.4998.1.1.5.1.12.1 | NodecadSystemCompliances | |||
| 1.3.6.1.4.1.4998.1.1.5.1.12.1.1 | CompliancecadSystemCompliance | current | Compliance statement for entities implementing the Cadant System Mib. | |
| 1.3.6.1.4.1.4998.1.1.5.1.12.2 | NodecadSystemGroups | |||
| 1.3.6.1.4.1.4998.1.1.5.1.12.2.1 | GroupcadSysParamsGroup | current | System parameter objects | |
| 1.3.6.1.4.1.4998.1.1.5.1.12.2.2 | GroupcadSysSystemGroup | current | System description objects | |
| 1.3.6.1.4.1.4998.1.1.5.1.12.2.3 | GroupcadSysControlGroup | deprecated | System control objects | |
| 1.3.6.1.4.1.4998.1.1.5.1.12.2.4 | GroupcadSysSnmpGroup | current | System snmp control object | |
| 1.3.6.1.4.1.4998.1.1.5.1.12.2.5 | GroupcadSysBootParamsGroup | current | System boot parameters objects | |
| 1.3.6.1.4.1.4998.1.1.5.1.12.2.6 | GroupcadSysReloadGroup | current | System reload control objects | |
| 1.3.6.1.4.1.4998.1.1.5.1.12.2.7 | GroupcadSysImageGroup | current | System image status objects | |
| 1.3.6.1.4.1.4998.1.1.5.1.12.2.8 | GroupcadSysConfigurationGroup | current | Configuration objects | |
| 1.3.6.1.4.1.4998.1.1.5.1.12.2.9 | GroupcadSysDataServerGroup | current | Configuration objects | |
| 1.3.6.1.4.1.4998.1.1.5.1.12.2.10 | GroupcadSysSourceAddressGroup | current | Source Interface objects. | |
| 1.3.6.1.4.1.4998.1.1.5.1.13 | NodecadSysProcPolicingConfig | |||
| 1.3.6.1.4.1.4998.1.1.5.1.13.1 | ScalarcadSysProcRouterControlGlobalPacketRate | read-write | current | The maximum permitted global protocol packet throttle rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.2 | ScalarcadSysProcArpPacketRate | read-write | current | The maximum permitted ARP packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.3 | ScalarcadSysProcDhcpPacketRate | read-write | current | The maxmimu permitted DHCP packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.4 | ScalarcadSysProcIcmpPacketRate | read-write | current | The maximum permitted ICMP(IPv4) packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.5 | ScalarcadSysProcOspfPacketRate | read-write | current | The maximum permitted OSPFv2 packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.6 | ScalarcadSysProcRipPacketRate | read-write | current | The maximum permitted RIP packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.7 | ScalarcadSysProcIgmpPacketRate | read-write | current | The maximum permitted IGMP packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.8 | ScalarcadSysProcRouterControlOtherPacketRate | read-write | current | The other protocol packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.10 | ScalarcadSysProcSnmpPacketRate | read-write | current | The SNMP packet rate to the System Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.11 | ScalarcadSysProcTftpPacketRate | read-write | current | The TFTP packet rate to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.12 | ScalarcadSysProcIsisPacketRate | read-write | current | The IS-IS packet rate to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.13 | ScalarcadSysProcNdPacketRate | read-write | current | The maximum permitted Neighbor Discover (ND) packet throttle rate to the Router Control processor. This includes IPv6 Router Solicitation, Router Advertise, Ne… |
| 1.3.6.1.4.1.4998.1.1.5.1.13.14 | ScalarcadSysProcDhcpIpv6PacketRate | read-write | current | The maximum permitted DHCP (Ipv6) packet throttle rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.15 | ScalarcadSysProcIcmpIpv6PacketRate | read-write | current | The maximum permitted ICMP (Ipv6 other than Neighbor Discover and MLD) packet throttle rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.16 | ScalarcadSysProcMldPacketRate | read-write | current | The maximum permitted MLD (version 1 and version 2) packet throttle rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.17 | ScalarcadSysProcBgpPacketRate | read-write | current | The maximum permitted BGP packet throttle rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.18 | ScalarcadSysProcPimPacketRate | read-write | current | The maximum permitted PIM packet throttle rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.19 | ScalarcadSysProcSnmpCmPacketRate | read-write | current | The maximum permitted SNMP (from CMs) packet throttle rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.20 | ScalarcadSysProcCopsPacketRate | read-write | current | The maximum permitted Cops packet throttle rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.21 | ScalarcadSysProcTelnetPacketRate | read-write | current | The maximum permitted Telnet packet throttle rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.22 | ScalarcadSysProcOspfv3PacketRate | read-write | current | The maximum permitted OSPFv3 packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.23 | ScalarcadSysProcTftpIpv6PacketRate | read-write | current | The TFTP (IPv6) packet rate to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.24 | ScalarcadSysProcEventIcmpPacketRate | read-write | current | The maximum permitted ICMP event packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.25 | ScalarcadSysProcEventNoRoutePacketRate | read-write | current | The maximum permitted No Route event packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.26 | ScalarcadSysProcEventIcmpIpv6PacketRate | read-write | current | The maximum permitted ICMP (IPv6) event packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.27 | ScalarcadSysProcEventNoRouteIpv6PacketRate | read-write | current | The maximum permitted No Route (IPv6) event packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.28 | ScalarcadSysProcEventArpPacketRate | read-write | current | The maximum permitted ARP event packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.29 | ScalarcadSysProcEventNdPacketRate | read-write | current | The maximum permitted ND event packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.30 | ScalarcadSysProcEventTtlPacketRate | read-write | current | The maximum permitted TTL event packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.31 | ScalarcadSysProcEventTtlIpv6PacketRate | read-write | current | The maximum permitted TTL (IPv6) event packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.32 | ScalarcadSysProcEventDadPacketRate | read-write | current | The maximum permitted DAD event packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.33 | ScalarcadSysProcEventDefaultPacketRate | read-write | current | The maximum permitted Default event packet rate to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.34 | ScalarcadSysProcLdpPacketRate | read-write | current | The LDP (UDP and TCP) packet rate to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.35 | ScalarcadSysProcClearPolicingCounts | read-write | current | This variable always returns false(2) upon reading. When set to true(1), all objects under cadSysProcPolicingCounts are cleared. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.36 | ScalarcadSysProcLacpPacketRate | read-write | current | The total LACP packet rate to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.37 | ScalarcadSysProcVrepPacketRate | read-write | current | The maximum permitted D6/VREP packet rate to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.38 | ScalarcadSysProcVpmePacketRate | read-write | current | The maximum permitted VPME packet rate to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.13.39 | ScalarcadSysProcErmRpcPacketRate | read-write | current | The maximum permitted RPC packet rate from an RPC ERM processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14 | NodecadSysProcPolicingCounts | |||
| 1.3.6.1.4.1.4998.1.1.5.1.14.1 | ScalarcadSysProcRouterControlGlobalPacketsReceivedPassed | read-only | current | The number of packets received passed to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.2 | ScalarcadSysProcRouterControlGlobalPacketsReceivedDropped | read-only | current | The number of packets received that are dropped by the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.4 | ScalarcadSysProcArpPacketsReceivedPassed | read-only | current | The number of ARP packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.5 | ScalarcadSysProcArpPacketsReceivedDropped | read-only | current | The number of ARP packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.7 | ScalarcadSysProcDhcpPacketsReceivedPassed | read-only | current | The number of DHCP packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.8 | ScalarcadSysProcDhcpPacketsReceivedDropped | read-only | current | The number of DHCP packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.10 | ScalarcadSysProcIcmpPacketsReceivedPassed | read-only | current | The number of ICMP packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.11 | ScalarcadSysProcIcmpPacketsReceivedDropped | read-only | current | The number of ICMP packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.13 | ScalarcadSysProcOspfPacketsReceivedPassed | read-only | current | The number of OSPFv2 packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.14 | ScalarcadSysProcOspfPacketsReceivedDropped | read-only | current | The number of OSPFv2 packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.16 | ScalarcadSysProcRipPacketsReceivedPassed | read-only | current | The number of RIP packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.17 | ScalarcadSysProcRipPacketsReceivedDropped | read-only | current | The number of RIP packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.19 | ScalarcadSysProcIgmpPacketsReceivedPassed | read-only | current | The number of IGMP packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.20 | ScalarcadSysProcIgmpPacketsReceivedDropped | read-only | current | The number of IGMP packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.22 | ScalarcadSysProcRouterControlOtherPacketsReceivedPassed | read-only | current | The number of other packets received passed to the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.23 | ScalarcadSysProcRouterControlOtherPacketsReceivedDropped | read-only | current | The number of other packets received that are dropped by the Router Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.25 | ScalarcadSysProcSnmpPacketsReceivedPassed | read-only | current | The number of SNMP packets received passed to the System Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.26 | ScalarcadSysProcSnmpPacketsReceivedDropped | read-only | current | The number of SNMP packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.28 | ScalarcadSysProcTftpPacketsReceivedPassed | read-only | current | The number of TFTP packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.29 | ScalarcadSysProcTftpPacketsReceivedDropped | read-only | current | The number of TFTP packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.31 | ScalarcadSysProcIsisPacketsReceivedPassed | read-only | current | The number of IS-IS packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.32 | ScalarcadSysProcIsisPacketsReceivedDropped | read-only | current | The number of IS-IS packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.37 | ScalarcadSysProcNdPacketsReceivedPassed | read-only | current | The number of Neighbor Discover packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.38 | ScalarcadSysProcNdPacketsReceivedDropped | read-only | current | The number of Neighbor Discover packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.40 | ScalarcadSysProcDhcpIpv6PacketsReceivedPassed | read-only | current | The number of DHCP(Ipv6) packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.41 | ScalarcadSysProcDhcpIpv6PacketsReceivedDropped | read-only | current | The number of DHCP(IPv6) packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.43 | ScalarcadSysProcIcmpIpv6PacketsReceivedPassed | read-only | current | The number of ICMP(Ipv6) packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.44 | ScalarcadSysProcIcmpIpv6PacketsReceivedDropped | read-only | current | The number of ICMP(IPv6) packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.46 | ScalarcadSysProcMldPacketsReceivedPassed | read-only | current | The number of MLD packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.47 | ScalarcadSysProcMldPacketsReceivedDropped | read-only | current | The number of MLD packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.49 | ScalarcadSysProcBgpPacketsReceivedPassed | read-only | current | The number of BGP packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.50 | ScalarcadSysProcBgpPacketsReceivedDropped | read-only | current | The number of BGP packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.52 | ScalarcadSysProcPimPacketsReceivedPassed | read-only | current | The number of PIM packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.53 | ScalarcadSysProcPimPacketsReceivedDropped | read-only | current | The number of PIM packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.55 | ScalarcadSysProcSnmpCmPacketsReceivedPassed | read-only | current | The number of SNMP (from CMs) packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.56 | ScalarcadSysProcSnmpCmPacketsReceivedDropped | read-only | current | The number of SNMP (from CMs) packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.58 | ScalarcadSysProcCopsPacketsReceivedPassed | read-only | current | The number of COPS packets received passed to the System Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.59 | ScalarcadSysProcCopsPacketsReceivedDropped | read-only | current | The number of COPS packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.61 | ScalarcadSysProcTelnetPacketsReceivedPassed | read-only | current | The number of TELNET packets received passed to the System Control processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.62 | ScalarcadSysProcTelnetPacketsReceivedDropped | read-only | current | The number of TELNET packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.64 | ScalarcadSysProcOspfv3PacketsReceivedPassed | read-only | current | The number of OSPFv3 packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.65 | ScalarcadSysProcOspfv3PacketsReceivedDropped | read-only | current | The number of OSPFv3 packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.67 | ScalarcadSysProcTftpIpv6PacketsReceivedPassed | read-only | current | The number of TFTP (IPv6) packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.68 | ScalarcadSysProcTftpIpv6PacketsReceivedDropped | read-only | current | The number of TFTP (IPv6) packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.70 | ScalarcadSysProcLdpPacketsReceivedPassed | read-only | current | The number of LDP (UDP and TCP) packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.71 | ScalarcadSysProcLdpPacketsReceivedDropped | read-only | current | The number of LDP (UDP and TCP) packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.73 | ScalarcadSysProcEventIcmpPacketsReceivedPassed | read-only | current | The number of ICMP event packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.74 | ScalarcadSysProcEventIcmpPacketsReceivedDropped | read-only | current | The number of ICMP event packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.75 | ScalarcadSysProcEventNoRoutePacketsReceivedPassed | read-only | current | The number of No Route event packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.76 | ScalarcadSysProcEventNoRoutePacketsReceivedDropped | read-only | current | The number of No Route event packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.77 | ScalarcadSysProcEventIcmpIpv6PacketsReceivedPassed | read-only | current | The number of ICMP (IPv6) event packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.78 | ScalarcadSysProcEventIcmpIpv6PacketsReceivedDropped | read-only | current | The number of ICMP (IPv6) event packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.79 | ScalarcadSysProcEventNoRouteIpv6PacketsReceivedPassed | read-only | current | The number of No Route (IPv6) event packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.80 | ScalarcadSysProcEventNoRouteIpv6PacketsReceivedDropped | read-only | current | The number of No Route (IPv6) event packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.81 | ScalarcadSysProcEventArpPacketsReceivedPassed | read-only | current | The number of ARP event packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.82 | ScalarcadSysProcEventArpPacketsReceivedDropped | read-only | current | The number of ARP event packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.83 | ScalarcadSysProcEventNdPacketsReceivedPassed | read-only | current | The number of ND event packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.84 | ScalarcadSysProcEventNdPacketsReceivedDropped | read-only | current | The number of ND event packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.85 | ScalarcadSysProcEventTtlPacketsReceivedPassed | read-only | current | The number of TTL event packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.86 | ScalarcadSysProcEventTtlPacketsReceivedDropped | read-only | current | The number of TTL event packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.87 | ScalarcadSysProcEventTtlIpv6PacketsReceivedPassed | read-only | current | The number of TTL (IPv6) event packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.88 | ScalarcadSysProcEventTtlIpv6PacketsReceivedDropped | read-only | current | The number of TTL (IPv6) event packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.89 | ScalarcadSysProcEventDadPacketsReceivedPassed | read-only | current | The number of DAD event packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.90 | ScalarcadSysProcEventDadPacketsReceivedDropped | read-only | current | The number of DAD event packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.91 | ScalarcadSysProcEventDefaultPacketsReceivedPassed | read-only | current | The number of Default event packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.92 | ScalarcadSysProcEventDefaultPacketsReceivedDropped | read-only | current | The number of Default event packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.93 | ScalarcadSysProcLacpPacketsReceivedPassed | read-only | current | The number of LACP packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.94 | ScalarcadSysProcLacpPacketsReceivedDropped | read-only | current | The number of LACP packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.95 | ScalarcadSysProcVrepPacketsReceivedPassed | read-only | current | The number of D6/VREP packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.96 | ScalarcadSysProcVrepPacketsReceivedDropped | read-only | current | The number of D6/VREP packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.97 | ScalarcadSysProcVpmePacketsReceivedPassed | read-only | current | The number of VPME packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.98 | ScalarcadSysProcVpmePacketsReceivedDropped | read-only | current | The number of VPME packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.99 | ScalarcadSysProcErmRpcPacketsReceivedPassed | read-only | current | The number of ERM RPC packets received passed to the processor. |
| 1.3.6.1.4.1.4998.1.1.5.1.14.100 | ScalarcadSysProcErmRpcPacketsReceivedDropped | read-only | current | The number of ERM RPC packets received that are dropped. |
| 1.3.6.1.4.1.4998.1.1.5.1.15 | NodecadSysBanner | |||
| 1.3.6.1.4.1.4998.1.1.5.1.15.1 | TablecadSysBannerMotdTable | not-accessible | current | Table describing the MOTD banner that is displayed before the login: prompt |
| 1.3.6.1.4.1.4998.1.1.5.1.15.1.1 | RowcadSysBannerMotdEntry | not-accessible | current | Describes a line in the MOTD banner |
| 1.3.6.1.4.1.4998.1.1.5.1.15.1.1.1 | ColumncadSysBannerMotdLine | not-accessible | current | The line number |
| 1.3.6.1.4.1.4998.1.1.5.1.15.1.1.2 | ColumncadSysBannerMotdText | read-create | current | The MOTD banner text |
| 1.3.6.1.4.1.4998.1.1.5.1.15.1.1.3 | ColumncadSysBannerMotdRowStatus | read-create | current | The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following stat… |
| 1.3.6.1.4.1.4998.1.1.5.1.15.2 | TablecadSysBannerLoginTable | not-accessible | current | Table describing the login banner that is displayed after the MOTD banner and before the login: prompt |
| 1.3.6.1.4.1.4998.1.1.5.1.15.2.1 | RowcadSysBannerLoginEntry | not-accessible | current | Describes a line in the login banner |
| 1.3.6.1.4.1.4998.1.1.5.1.15.2.1.1 | ColumncadSysBannerLoginLine | not-accessible | current | The line number |
| 1.3.6.1.4.1.4998.1.1.5.1.15.2.1.2 | ColumncadSysBannerLoginText | read-create | current | The login banner text |
| 1.3.6.1.4.1.4998.1.1.5.1.15.2.1.3 | ColumncadSysBannerLoginRowStatus | read-create | current | The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following stat… |
| 1.3.6.1.4.1.4998.1.1.5.1.15.3 | TablecadSysBannerExecTable | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.5.1.15.3.1 | RowcadSysBannerExecEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.5.1.15.3.1.1 | ColumncadSysBannerExecLine | not-accessible | current | Index of this banner line. |
| 1.3.6.1.4.1.4998.1.1.5.1.15.3.1.2 | ColumncadSysBannerExecText | read-create | current | Ascii text of this banner line. |
| 1.3.6.1.4.1.4998.1.1.5.1.15.3.1.3 | ColumncadSysBannerExecRowStatus | read-create | current | The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following stat… |
| 1.3.6.1.4.1.4998.1.1.5.1.15.4 | TablecadSysBannerIncomingTable | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.5.1.15.4.1 | RowcadSysBannerIncomingEntry | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.5.1.15.4.1.1 | ColumncadSysBannerIncomingLine | not-accessible | current | |
| 1.3.6.1.4.1.4998.1.1.5.1.15.4.1.2 | ColumncadSysBannerIncomingText | read-create | current | |
| 1.3.6.1.4.1.4998.1.1.5.1.15.4.1.3 | ColumncadSysBannerIncomingRowStatus | read-create | current | The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following stat… |
| 1.3.6.1.4.1.4998.1.1.5.1.16 | NodecadSysServer | |||
| 1.3.6.1.4.1.4998.1.1.5.1.16.1 | TablecadSysServerTable | not-accessible | current | Table describing the (INET) services that should run on the SCM. |
| 1.3.6.1.4.1.4998.1.1.5.1.16.1.1 | RowcadSysServerEntry | not-accessible | current | Describes an INET service and whether it is enabled |
| 1.3.6.1.4.1.4998.1.1.5.1.16.1.1.1 | ColumncadSysServerType | not-accessible | current | The service type |
| 1.3.6.1.4.1.4998.1.1.5.1.16.1.1.2 | ColumncadSysServerAdminState | read-create | current | The administrative state of the server. |
| 1.3.6.1.4.1.4998.1.1.5.1.17 | NodecadSysPatchParams | |||
| 1.3.6.1.4.1.4998.1.1.5.1.17.1 | TablecadSysPatchParamTable | not-accessible | current | Table of patch parameters. |
| 1.3.6.1.4.1.4998.1.1.5.1.17.1.1 | RowcadSysPatchParamEntry | not-accessible | current | Entry of an individual patch parameter. |
| 1.3.6.1.4.1.4998.1.1.5.1.17.1.1.1 | ColumncadSysPatchParamIndex | not-accessible | current | The patch parameter index. |
| 1.3.6.1.4.1.4998.1.1.5.1.17.1.1.2 | ColumncadSysPatchParamName | read-create | current | The patch parameter name. |
| 1.3.6.1.4.1.4998.1.1.5.1.17.1.1.3 | ColumncadSysPatchParamValue | read-create | current | The patch parameter value. |
| 1.3.6.1.4.1.4998.1.1.5.1.17.1.1.4 | ColumncadSysPatchParamDescription | read-create | current | The patch parameter description. |
| 1.3.6.1.4.1.4998.1.1.5.1.17.1.1.5 | ColumncadSysPatchParamRowStatus | read-create | current | The row status variable used according to row installation and removal convention. In our case, we have simplified this to the usage of only the following stat… |
| 1.3.6.1.4.1.4998.1.1.5.1.19 | NodecadSysMtceParams | |||
| 1.3.6.1.4.1.4998.1.1.5.1.19.8 | ScalarcadSysMtceStatusCloneMonitorThreshold | read-write | current | Timeout during normal operation. |
| 1.3.6.1.4.1.4998.1.1.5.1.19.9 | ScalarcadSysMtceStatusCloneInitThreshold | read-write | current | Timeout on initialization for first status message. |
| 1.3.6.1.4.1.4998.1.1.5.1.19.10 | ScalarcadSysMtceStatusCloneRcvyThreshold | read-write | current | Timeout following clone side recovery. |
| 1.3.6.1.4.1.4998.1.1.5.1.19.11 | ScalarcadSysMtceBasePingRate | read-write | current | Interval between system maintenance polling of monitored threads. |
| 1.3.6.1.4.1.4998.1.1.5.1.19.12 | ScalarcadSysMtceOvSensitivity | read-write | current | Defines the sensitivity of user overload to changes in internal work load. Higher sensitivity results in more rapid change of user overload in response to a ch… |
| 1.3.6.1.4.1.4998.1.1.5.1.19.13 | ScalarcadSysMtceOvThreshold | read-write | current | Defines the overall threshold of user overload transitions. Higher thresholds require a longer time in an internal overload state before user overload transiti… |
| 1.3.6.1.4.1.4998.1.1.5.1.19.14 | ScalarcadSysMtceDULPacketInterval | read-write | current | Interval between maintenance polling of monitored BroadCom devices. Setting the value to zero will disable BroadCom device monitoring. |
| 1.3.6.1.4.1.4998.1.1.5.1.21 | NodecadSysDataServer | |||
| 1.3.6.1.4.1.4998.1.1.5.1.21.1 | ScalarcadSysDataServerDataTimeout | read-write | current | Time allowed for Data Query/Update to be processed. |
| 1.3.6.1.4.1.4998.1.1.5.1.21.2 | ScalarcadSysDataServerDataEventsPerCycle | read-write | current | Number of data events allowed per cycle. |
| 1.3.6.1.4.1.4998.1.1.5.1.21.3 | ScalarcadSysDataServerDataSyncTimeout | read-write | current | Number of data events allowed per cycle. |
| 1.3.6.1.4.1.4998.1.1.5.1.21.4 | ScalarcadSysDataServerSnmpReadAheadEnable | read-write | current | When this value is set to true Snmp read ahead is performed. |
| 1.3.6.1.4.1.4998.1.1.5.1.21.5 | ScalarcadSysDataServerSnmpReadAheadMax | read-write | current | This value is the maximum number of records to read ahead |
| 1.3.6.1.4.1.4998.1.1.5.1.21.6 | ScalarcadSysDataServerSnmpRefreshTime | read-write | current | This value represents how old a database record can be to be used. |
| 1.3.6.1.4.1.4998.1.1.5.1.21.7 | ScalarcadSysDataServerSyncDataEventsPerCycle | read-write | current | This value is the maximum number of Sync events that will be processed per cycle. |
| 1.3.6.1.4.1.4998.1.1.5.1.21.8 | ScalarcadSysDataServerLoPriDataEventsPerCycle | read-write | current | This value is the maximum number of Low Priority Sync events to be processed per cycle. |
| 1.3.6.1.4.1.4998.1.1.5.1.22 | NodecadSysSourceAddress | |||
| 1.3.6.1.4.1.4998.1.1.5.1.22.1 | TablecadSysSourceAddressTable | not-accessible | current | Table of source interface addresses for administrative services |
| 1.3.6.1.4.1.4998.1.1.5.1.22.1.1 | RowcadSysSourceAddressEntry | not-accessible | current | This entry contains the configured source IPv4 and/or IPv6 address for each administrative service. If configured, it also contains the global default address. |
| 1.3.6.1.4.1.4998.1.1.5.1.22.1.1.1 | ColumncadSysSourceAddressIndex | not-accessible | current | The type of administrative service. |
| 1.3.6.1.4.1.4998.1.1.5.1.22.1.1.2 | ColumncadSysSourceInterfaceIpv4IfIndex | read-write | current | The ifIndex of the interface from which all IPv4 packets are sourced. For a server service, it is also the only DIP allowed for incoming requests. A value of 0… |
| 1.3.6.1.4.1.4998.1.1.5.1.22.1.1.3 | ColumncadSysSourceAddressIpv4Address | read-only | current | The IPv4 address of the IPv4 interface at the time the row ipv4 ifIndex was populated. Used as the source address for the service if the state is in-service. F… |
| 1.3.6.1.4.1.4998.1.1.5.1.22.1.1.4 | ColumncadSysSourceInterfaceIpv6IfIndex | read-write | current | The ifIndex of the interface from which all IPv6 packets are sourced (not currently supported). For a server service, it is also the only DIP allowed for incom… |
| 1.3.6.1.4.1.4998.1.1.5.1.22.1.1.5 | ColumncadSysSourceAddressIpv6Address | read-only | current | The IPv6 address of the IPv6 interface at the time the ipv6 ifIndex was populated. Used as the source address for the service if the state is in-service. For a… |
| 1.3.6.1.4.1.4998.1.1.5.1.23 | NodecadSysLicenseControl | |||
| 1.3.6.1.4.1.4998.1.1.5.1.23.1 | ScalarcadSysLicenseCardId | not-accessible | current | CAM to be licensed. |
| 1.3.6.1.4.1.4998.1.1.5.1.23.2 | ScalarcadSysLicenseKey | not-accessible | current | License key to apply to the CAM. |
| 1.3.6.1.4.1.4998.1.1.5.1.23.3 | ScalarcadSysLicensePorts | not-accessible | current | Number of CAM ports associated with the license. |
| 1.3.6.1.4.1.4998.1.1.5.1.23.4 | ScalarcadSysLicenseAnnex | not-accessible | current | This attribute defines the ITU-J-83 Annex being used for this E6000 CMTS License. |
| 1.3.6.1.4.1.4998.1.1.5.1.23.5 | ScalarcadSysLicenseStatus | read-only | current | Current status of licensing operation. |
| 1.3.6.1.4.1.4998.1.1.5.1.24 | NodecadLaesMdTimestampMode | |||
| 1.3.6.1.4.1.4998.1.1.5.1.24.1 | TablecadLaesMdTimestampModeTable | not-accessible | current | Table of LAES Mediation Device Timestamp mode table |
| 1.3.6.1.4.1.4998.1.1.5.1.24.1.1 | RowcadLaesMdTimestampModeEntry | not-accessible | current | This entry contains the configured MD IPv4. If configured, then all encapsulated tap packets going to that MD will contain a timestamp in the tap header. |
| 1.3.6.1.4.1.4998.1.1.5.1.24.1.1.1 | ColumncadLaesMdTimestampModeInetAddrType | not-accessible | current | The IP Address type of Mediation Device |
| 1.3.6.1.4.1.4998.1.1.5.1.24.1.1.2 | ColumncadLaesMdTimestampModeInetAddr | not-accessible | current | The IP Address of the Mediation Device. |
| 1.3.6.1.4.1.4998.1.1.5.1.24.1.1.3 | ColumncadLaesMdTimestampModRowStatus | read-create | current | The row status of this entry |
| 1.3.6.1.4.1.4998.1.1.5.1.25 | NodecadSysSharedSecret | |||
| 1.3.6.1.4.1.4998.1.1.5.1.25.1 | TablecadSysMICSecondarySecretTable | not-accessible | current | Table containing secondary shared secret strings for cable modem configuration file authentication. This table is not used unless cadSysMICEnable is set to tru… |
| 1.3.6.1.4.1.4998.1.1.5.1.25.1.1 | RowcadSysMICSecondarySecretEntry | not-accessible | current | Entry containing secondary shared secret strings for cable modem configuration file authentication. |
| 1.3.6.1.4.1.4998.1.1.5.1.25.1.1.1 | ColumncadSysMICSecondarySecretIndex | not-accessible | current | Internal index for this MIB row. |
| 1.3.6.1.4.1.4998.1.1.5.1.25.1.1.2 | ColumncadSysMICSecondarySecretString | read-create | current | Encrypted MIC Authentication shared secret string. |
| 1.3.6.1.4.1.4998.1.1.5.1.25.1.1.3 | ColumncadSysMICSecondarySecretStatus | read-create | current | The status of this conceptual row. |