CADANT-DQOS-GATE-MIB
92 objects
This MIB Module supplies the management objects which are specific to the PacketCable DQoS Gate client of COPS. The objects for the management of the standard COPS protocol reside in RFC2940.
Imported Objects
| CADANT-CMTS-PACKETCABLE-MIB | cadPCMibObjects |
| CADANT-TC | InetAddressIPv4or6 |
| DOCS-QOS3-MIB | docsQosIfDirection |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4998.1.1.115.1.2 | IdentitycadDQoSMib | This MIB Module supplies the management objects which are specific to the PacketCable DQoS Gate client of COPS. The objects for the management of the standard … | ||
| 1.3.6.1.4.1.4998.1.1.115.1.2.1 | NodecadDQoSMibObjects | |||
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1 | NodecadDQoSConfigBase | |||
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1 | TablecadDQoSGateTable | not-accessible | current | Table of DQoS Gate Data |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1 | RowcadDQoSGateEntry | not-accessible | current | This entry contains all of the data (except for the Authorized flow specs) for one Gate. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.1 | ColumncadDQoSGateId | not-accessible | current | The GateID is 32 bit identifier that is allocated from the local space at the CMTS where the Gate resides. Up to two gates MAY share the same Gate-ID. Typicall… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.2 | ColumncadDQoSGateSubscriberID | read-write | current | The Subscriber-ID identifies the subscriber (cable modem) for this service request. Its main use is to prevent various denial-of-service attacks. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.3 | ColumncadDQoSGateClassifierProtoID | read-write | current | protocol ID (see http://www.iana.org/assignments/protocol-numbers) to match in the IP header for the classifier - 0 for no match |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.4 | ColumncadDQoSGateClassifierSrcIP | read-write | current | Source IP Address to match in the IP header for the classifier |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.5 | ColumncadDQoSGateClassifierDestIP | read-write | current | Destination IP Address to match in the IP header for the classifier |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.6 | ColumncadDQoSGateClassifierSrcPort | read-write | current | Source port number to match in the IP header for the classifier |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.7 | ColumncadDQoSGateClassifierDestPort | read-write | current | Source port number to match in the IP header for the classifier |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.8 | ColumncadDQoSMgmtGateCommitNotAllowed | read-write | current | If cadDQoSGateSource is policyServer(5), then when this field is TRUE, then the policy is in a transient state and the policy server does not wish for this pol… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.9 | ColumncadDQoSGateAutoCommit | read-write | current | When this flag is set, resources are immediately activated upon reservation. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.17 | ColumncadDQoSGateResourceID | read-write | current | The Resource-ID is a local 32-bit identifier that is allocated at the CMTS where the Gate resides. Any number of gates MAY share a resource-ID, and therefore s… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.18 | ColumncadDQoSGateSessionClass | read-write | current | Session class identifies the proper admission control policy or parameters to be applied for this gate. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.19 | ColumncadDQoSGateDSField | read-write | current | Access to the bandwidth and differentiated treatment is provided to packets with the appropriate encoding of bits in the field of the IP header specified for D… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.20 | ColumncadDQoSGateTimerT7 | read-write | current | The CMTS MUST set the Timeout for Admitted QoS Parameters for the service flow to the value specified by this timer. The timeout for Admitted QoS Parameters li… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.21 | ColumncadDQoSGateTimerT8 | read-write | current | The CMTS MUST set the Timeout for Active QoS Parameters for the service flow to the value specified by this timer. The Timeout for Active QoS Parameters limits… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.22 | ColumncadDQoSGateReserveRequest | read-write | current | Flag indicating that a reservation request has been received for this gate. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.23 | ColumncadDQoSGateCommited | read-write | current | Flag indicating that a reservation request has been received for this gate. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.24 | ColumncadDQoSTearFlows | read-write | current | Enumeration indicating whether the Flows for this Gate are to be torn down. If set to anything other than noReason by the CAM, then the flows have been torn do… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.25 | ColumncadDQoSGateESPDupContent | read-write | current | If set, CMTS MUST send a duplicate copy of all packets matching the classifier(s) for this gate to the DF-IP-Address-for-CCC. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.26 | ColumncadDQoSGateESPDfCCCIp | read-write | current | DF-IP-Address-for-CCC is the address of the Electronic Surveillance Delivery Function to whom the duplicated call content packets are to be sent. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.27 | ColumncadDQoSGateESPDfCCCPort | read-write | current | DF-Port-for-CCC is the port number of the Electronic Surveillance Delivery Function to whom the duplicated call content packets are to be sent. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.28 | ColumncadDQoSSFID | read-write | current | Service flow ID for this gate ID and flow direction |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.29 | ColumncadDQoSGateESPCCCId | read-write | current | CCC-ID is the call connection channel identifier to be used by the Elecronic Surveillance Delivery Function to correlate call content packets. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.30 | ColumncadDQoSGateESPSrcCCCIp | read-write | current | This is the source IP address of packets sent to the Electronic Surveillance Delivery Function to whom the duplicated call content packets are to be sent. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.31 | ColumncadDQoSGateServiceClassName | read-write | current | Service Class Name. DOCSIS specifies that the maximum size is 15 printable ASCII characters with a terminating zero. The terminating zero is not represented in… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.32 | ColumncadDQoSGateUsSFSchedType | read-write | current | Upstream Service Flows Scheduling Type (e.g. UGS) |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.33 | ColumncadDQoSGateUsNomGrantInterval | read-write | current | Upstream Nominal Grant Interval |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.34 | ColumncadDQoSGateUsTolGrantJitter | read-write | current | Upstream Tolerated Grant Jitter |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.35 | ColumncadDQoSGateUsGrantsPerInterval | read-write | current | Upstream Grants Per Interval |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.36 | ColumncadDQoSGateUsUnsolitedGrantSize | read-write | current | Upstream Unsolicited Grant Size |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.37 | ColumncadDQoSGateUsReqTransPolicy | read-write | current | Upstream Request Transmission Policy |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.38 | ColumncadDQoSGateUsNomPollingInterval | read-write | current | Upstream Nominal Polling Interval |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.39 | ColumncadDQoSGateUsTolPollJitter | read-write | current | Upstream Tolerated Poll Jitter |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.40 | ColumncadDQoSGateUsIpToSOverride | read-write | current | Upstream IP Type Of Service Override |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.41 | ColumncadDQoSGateUsMaxConcatBurst | read-write | current | Upstream Maximum Concatenated Burst |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.42 | ColumncadDQoSGateDsTrafficPriority | read-write | current | Downstream Traffic Priority |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.43 | ColumncadDQoSGateDsMaxSustainedRate | read-write | current | Downstream Maximum Sustained Traffic Rate |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.44 | ColumncadDQoSGateDsMaxTrafBurst | read-write | current | Downstream Maximum Traffic Burst |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.45 | ColumncadDQoSGateDsMinReservedTrafRate | read-write | current | Downstream Minimum Reserved Traffic Rate |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.46 | ColumncadDQoSGateDsMinPacketSize | read-write | current | Downstream Minimum Reserved Rate Packet Size |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.1.1.47 | ColumncadDQoSGateDsMaxLatency | read-write | current | Downstream Maximum Latency |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2 | TablecadDQoSMgmtGateTable | not-accessible | current | Table of DQoS Gate Data that is not needed on the CAM. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1 | RowcadDQoSMgmtGateEntry | not-accessible | current | This entry contains all of the data (except for the Authorized flow specs) for one Gate. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.1 | ColumncadDQoSMgmtGateControllerIP | read-write | current | IP Address of the Gate Controller which sourced this gate. If gate was created from another source, this field is 0. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.2 | ColumncadDQoSMgmtGateRemoteGateIP | read-write | current | IP Address for remote Gate coordinator |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.3 | ColumncadDQoSMgmtGateRemoteGatePort | read-write | current | Port number of remote Gate coordinator |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.4 | ColumncadDQoSMgmtGateRemoteGateNoRequireGateOpen | read-write | current | When this flag is set, the CMTS MUST not expect a Gate-Open message from a remote gate coordinator. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.5 | ColumncadDQoSMgmtGateRemoteGateNoSendGateOpen | read-write | current | When this flag is set, the CMTS MUST not send a Gate-Open message to a remote gate coordinator. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.6 | ColumncadDQoSMgmtGateRemoteGateID | read-write | current | Gate-ID used by remote gate coordinator. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.7 | ColumncadDQoSMgmtGateRemoteGateAlgorithm | read-write | current | Authentication algorithm for Gate Coordination messages |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.8 | ColumncadDQoSMgmtGateRemoteGateSecurityKey | read-write | current | A variable length key used in producing the authentication check in the gate coordination messages |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.9 | ColumncadDQoSMgmtGateEventGenPriRKSIP | read-write | current | Primary-Record-Keeping-Server-IP-Address is the address of the record keeper to whom event records are sent. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.10 | ColumncadDQoSMgmtGateEventGenPriRKSPort | read-write | current | Primary-Record-Keeping-Server-Port is the port number of the record keeper to whom event records are sent. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.11 | ColumncadDQoSMgmtGateEventGenBatchIndicator | read-write | current | If set, the CMTS MUST accumulate event records as part of a batch file and send to Record Keeping Server at periodic intervals. If clear, the CMTS MUST send th… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.12 | ColumncadDQoSMgmtGateEventGenSecRKSIP | read-write | current | Secondary-Record-Keeping-Server-IP-Address is the address of the secondary record keeper to whom records are sent if the primary record keeping server is unava… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.13 | ColumncadDQoSMgmtGateEventGenSecRKSPort | read-write | current | Secondary-Record-Keeping-Server-Port is the port number of the record keeper to whom event records are sent if the primary record keeping server is unavailable. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.14 | ColumncadDQoSMgmtGateEventGenBillCorrID | read-write | current | Billing-Correlation-ID is the identifier assigned by the CMS for all records related to this session. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.15 | ColumncadDQoSMgmtGateMediaConnCalledParty | read-write | current | E.164 formatted address specifying the actual dialed digits of the number of the terminating party. This field is a space-padded ASCII character string. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.16 | ColumncadDQoSMgmtGateMediaConnRoutingNum | read-write | current | E.164 formatted address specifying the routable number of the terminating party. This field is a space-padded ASCII character string. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.17 | ColumncadDQoSMgmtGateMediaConnChargeNum | read-write | current | E.164 formatted address specifying the number of the party to be charged. This field is a space-padded ASCII character string. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.18 | ColumncadDQoSMgmtGateMediaConnLocRouteNum | read-write | current | E.164 formatted address for local number portability use. This field is a space-padded ASCII character string. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.19 | ColumncadDQoSMgmtGateESPDfCDCIP | read-write | current | DF-IP-Address-for-CDC is the IP address of the Electronic Surveillance Delivery Function to whom the duplicated event messages are to be sent. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.20 | ColumncadDQoSMgmtGateESPDfCDCPort | read-write | current | DF-Port-for-CDC is the port number of the Electronic Surveillance Delivery Function to whom the duplicated event messages are to be sent. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.21 | ColumncadDQoSMgmtGateESPDupEvent | read-write | current | If set, CMTS MUST send a duplicate copy of all event messages related to this gate (e.g. QoS-Start, QoS-Stop, and possibly Call-Answer and Call-Disconnect) to … |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.25 | ColumncadDQoSMgmtGateSDPStrings | read-write | current | SDP-strings is the Session Description (SDP) of the upstream packet stream, followed by a NULL octet, followed by the Session Description (SDP) of the downstre… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.26 | ColumncadDQoSMgmtGateState | read-write | current | This is the current state of the Gate as defined in the Gate Transition Diagram of section 5.1.4 of [pkt-sp-dqos-i02-000818]. Allocated - The initial state of … |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.2.1.27 | ColumncadDQoSMgmtGateSource | read-write | current | This object indicates how the policy reached the CMTS. Other means that it originated from a source not identified above. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3 | TablecadDQoSAuthFlowSpecTable | not-accessible | current | The Authorized flow specification describes the envelope that the data flow is allowed to use. Issues such as subscribed level of service, account state, etc. … |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1 | RowcadDQoSAuthFlowSpecEntry | not-accessible | current | This entry contains one row in the table. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.1 | ColumncadDQoSAuthFlowSpecIdx | not-accessible | current | Index of flow specification within Gate |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.2 | ColumncadDQoSAuthFlowSpecBucketDepthb | read-write | current | Parameter 'b' in TSpec leaky bucket description. The token bucket size controls the maximum amount of data that the flow can send at the peak rate. More formal… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.3 | ColumncadDQoSAuthFlowSpecBucketRater | read-write | current | Parameter 'r' in TSpec leaky bucket description. The token bucket rate is the rate at which credits are placed into an imaginary token bucket. For each flow, a… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.4 | ColumncadDQoSAuthFlowSpecPeakRatep | read-write | current | Parameter 'p' in TSpec leaky bucket description. The maximum transmission rate limits how fast packets may be sent back to back from the host. Consider that if… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.5 | ColumncadDQoSAuthFlowSpecMinPolicedUnitm | read-write | current | Parameter 'm' in TSpec leaky bucket description. All IP datagrams less than size 'm' will be counted, when policed and tested for conformance to the TSpec, as … |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.6 | ColumncadDQoSAuthFlowSpecMaxPktSizeM | read-write | current | Parameter 'M' in TSpec leaky bucket description. This is the maximum packet size (including IP and header layers) that can be generated by the source. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.7 | ColumncadDQoSAuthFlowSpecReservedRateR | read-write | current | Parameter 'R' in RSpec. A service accepting an invocation request may be thought of as entering into a contract to provide the service described by the RSpec a… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.8 | ColumncadDQoSAuthFlowSpecSlackTermS | read-write | current | Parameter 'S' in RSpec. This is the maximum amount of slack (in microseconds) that can be added to the inherent delay to produce an acceptable delay bound. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.3.1.9 | ColumncadDQoSAuthFlowSpecSubscriberID | read-write | current | The Subscriber-ID identifies the subscriber (cable modem) for this service request. Its main use is to prevent various denial-of-service attacks. |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.4 | ScalarcadDQoSTimerT0 | read-write | current | This timer is implemented in the CMTS in the Gate state machine, and limits the period of time that a gate may be allocated without the gate parameters being s… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.5 | ScalarcadDQoSTimerT1 | read-write | current | This timer is implemented in the CMTS in the Gate state machine, and limits the period of time that may elapse between the authorization and a commit is perfor… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.6 | ScalarcadDQoSTimerT2 | read-write | current | This timer is implemented in the CMTS in the Gate state machine, and limits the time in the transient states of gate coordination. This timer is long enough to… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.7 | ScalarcadDQoSTimerT3 | read-write | current | This timer is implemented in the MTA or CMTS in the handling of RSVP reservations. It controls the total time that can elapse before the RSVP retransmit proces… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.8 | ScalarcadDQoSTimerT4 | read-write | current | This timer is implemented in the MTA in the handling of COMMIT messages. It controls the retransmission of COMMIT messages that may have been lost by the netwo… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.9 | ScalarcadDQoSTimerT5 | read-write | current | This timer is implemented in the CMTS (and CMTS-proxy) in the gate coordination processing. It controls the retransmission of GATE-OPEN and GATE-CLOSE messages… |
| 1.3.6.1.4.1.4998.1.1.115.1.2.1.1.10 | ScalarcadDQoSTimerT6 | read-write | current | This timer is implemented in the MTA or CMTS in the handling of RSVP reservations. It controls the initial delay used by the RSVP retransmit procedure. The def… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CadDQoSSource | INTEGER { snmp (1), configurationFile (2), externalDatabase (3), other (4), policyServer (5), compiledIntoCode (6) } | current | The origin of the database entry |
| PCReasonCode | INTEGER { noReason (-1), normal (0), resourceReassignment (1), reservationMaintFail (2), deregistration (3), timerT0Expiry (4), timerT1Expiry (5), timerT7Expiry (6), timerT8Expiry (7), newGateForFlows (8), unspecified (127) } | current | The reason why a call is being torn down |
| SDPString | OCTET STRING (SIZE (0..1024)) | current | A large (up to 1024 octets) string containing Session Description protocol for the call. Uses the same semantics as DisplayString but allows a larger size to handle the sizes allowable by the SDP protocol (see RFC2327). |