CM-FACILITY-MIB
1645 objects
This module defines the Facility MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.12.4 | IdentitycmFacilityMIB | This module defines the Facility MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||
| 1.3.6.1.4.1.2544.1.12.4.1 | NodecmFacilityObjects | |||
| 1.3.6.1.4.1.2544.1.12.4.1.1 | TablecmEthernetAccPortTable | not-accessible | current | A list of entries corresponding to Ethernet Access Port Facilities for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1 | RowcmEthernetAccPortEntry | not-accessible | current | A conceptual row in the cmEthernetAccPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.1 | ColumncmEthernetAccPortIndex | read-only | current | An integer index value used to uniquely identify this Ethernet Access Port within a card. Note that each Ethernet Access Port is uniquely identified by the ind… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.2 | ColumncmEthernetAccPortIfIndex | read-only | current | This object has the same value as ifIndex for Ethernet Access Port. An integer index value used to uniquely identify this Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.3 | ColumncmEthernetAccPortEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.4 | ColumncmEthernetAccPortAdminState | read-write | current | This object represents the Administrative State of the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.5 | ColumncmEthernetAccPortOperationalState | read-only | current | This object represents the Operational State of the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.6 | ColumncmEthernetAccPortSecondaryState | read-only | current | This object represents the Secondary State of the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.7 | ColumncmEthernetAccPortMTU | read-write | current | This object provides the MTU on the Ethernet Access Port. The object is made read-write for FSP150CC devices. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.8 | ColumncmEthernetAccPortMediaType | read-write | current | This object represents the type of Ethernet Media on the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.9 | ColumncmEthernetAccPortConfigSpeed | read-write | current | This object allows to configure the speed of the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.10 | ColumncmEthernetAccPortNegotiatedSpeed | read-only | current | This object provides the negotiated speed of the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.11 | ColumncmEthernetAccPortMDIXType | read-write | current | This object allows management of MDIX property on Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.12 | ColumncmEthernetAccPortJumboFramesEnabled | read-write | current | This object allows enabling/disabling jumbo frames support on the Ethernet Access Port. This object is only applicable for Ethernet Access Port on R3.1CM NTU C… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.13 | ColumncmEthernetAccPortSfpVendorName | read-only | current | This object provides the vendor name of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.14 | ColumncmEthernetAccPortSfpPartNumber | read-only | current | This object provides the part number of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.15 | ColumncmEthernetAccPortSfpSerialNumber | read-only | current | This object provides the serial number of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.16 | ColumncmEthernetAccPortSfpDateOfManufacture | read-only | current | This object provides the date of manufacture of the SFP. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.17 | ColumncmEthernetAccPortSfpConnectorValue | read-only | current | This object provides the SFP connector value. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.18 | ColumncmEthernetAccPortInitiateDiag | read-write | current | This object allows to initiate Etherjack diagnosis on the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.19 | ColumncmEthernetAccPortDiagnosePair1Cond | read-only | current | This object provides diagnosis results for the cable Pair 1 on Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.20 | ColumncmEthernetAccPortDiagnosePair2Cond | read-only | current | This object provides diagnosis results for the cable Pair 2 on Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.21 | ColumncmEthernetAccPortDiagnosePair3Cond | read-only | current | This object provides diagnosis results for the cable Pair 3 on Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.22 | ColumncmEthernetAccPortDiagnosePair4Cond | read-only | current | This object provides diagnosis results for the cable Pair 4 on Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.23 | ColumncmEthernetAccPortDiagnoseAutoNegCond | read-only | current | This object provides auto negotiation results of the diagnosis test on Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.24 | ColumncmEthernetAccPortDiagnoseLpbkCond | read-only | current | This object provides port loopback results of the diagnosis test on Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.25 | ColumncmEthernetAccPortDiagnoseEfmLpbkCond | read-only | current | This object provides remote EFM loopback results of the diagnosis test on Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.26 | ColumncmEthernetAccPortDiagnoseResult | read-only | current | This object provides results of the diagnosis test in string form on Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.27 | ColumncmEthernetAccPortDiagnoseTestStatus | read-only | current | This object provides the current status of the diagnosis test on Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.28 | ColumncmEthernetAccPortDiagnoseTestTime | read-only | current | This object provides the time when diagnosis test was last executed. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.29 | ColumncmEthernetAccPortLoopbackConfig | read-write | current | This object allows to initiate loopbacks on on the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.30 | ColumncmEthernetAccPortLoopbackStatus | read-only | current | This object provides status of the current loopback on the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.31 | ColumncmEthernetAccPortLoopbackTime | read-write | current | This object allows to specify time for timed-loopbacks on on the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.32 | ColumncmEthernetAccPortLoopbackSwapSADA | read-write | current | This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.33 | ColumncmEthernetAccPortOuterVlanLoopbackMask | read-write | current | This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be speci… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.34 | ColumncmEthernetAccPortOuterVlanLoopback1 | read-write | current | This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.35 | ColumncmEthernetAccPortOuterVlanLoopback2 | read-write | current | This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.36 | ColumncmEthernetAccPortOuterVlanLoopback3 | read-write | current | This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.37 | ColumncmEthernetAccPortInnerVlanLoopbackMask | read-write | current | This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be speci… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.38 | ColumncmEthernetAccPortInnerVlanLoopback1 | read-write | current | This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.39 | ColumncmEthernetAccPortInnerVlanLoopback2 | read-write | current | This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.40 | ColumncmEthernetAccPortInnerVlanLoopback3 | read-write | current | This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.41 | ColumncmEthernetAccPortLinkLossFwdEnabled | read-write | current | This object allows enabling/disabling link loss forwarding on the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.42 | ColumncmEthernetAccPortLinkLossFwdSignalType | read-write | deprecated | This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.43 | ColumncmEthernetAccPortLinkLossFwdTriggerTypes | read-write | current | This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.44 | ColumncmEthernetAccPortLinkLossFwdDelay | read-write | current | This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.45 | ColumncmEthernetAccPortLinkLossFwdActive | read-only | current | This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.46 | ColumncmEthernetAccPortLinkLossFwdPartnerEnabled | read-only | current | This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.47 | ColumncmEthernetAccPortLinkLossFwdLocalLinkId | read-write | current | This object allows configuration of the Local Link Id on Ethernet access port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.48 | ColumncmEthernetAccPortLinkLossFwdRemoteLinkIds | read-write | current | This object allows enabling/disabling Remote Link Ids on Ethernet access port. By setting the appropriate bit positions, the Ethernet access port is able to di… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.49 | ColumncmEthernetAccPortOamId | read-only | current | OAM Id. This is unique EFM OAM sublayer port id. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.50 | ColumncmEthernetAccPortOamAdminDisposition | read-write | deprecated | Ethernet Access Port's EFM OAM Disposition. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With FSP150CC Releas… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.51 | ColumncmEthernetAccPortOamDiscoveryState | read-only | current | Ethernet Access Port's OAM discovery state. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.52 | ColumncmEthernetAccPortOamLocalVarRtrvsEnabled | read-only | current | This object allows specification of whether the Ethernet Access Port supports sending variable response OAMPDUs. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.53 | ColumncmEthernetAccPortOamLocalLinkEventsEnabled | read-only | current | This object allows specification of whether the Ethernet Access Port supports interpreting Link Events. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.54 | ColumncmEthernetAccPortOamLocalOamLoopbacksSupported | read-write | current | This object allows specification of whether the Ethernet Access Port is capable of OAM remote loopback mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.55 | ColumncmEthernetAccPortOamLocalUnidirSupportEnabled | read-only | current | This object allows specification of whether the Ethernet Access Port is capable of sending OAMPDUs when the receive path is non-operational. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.56 | ColumncmEthernetAccPortOamLocalMaxPDUSize | read-only | current | This object represents the largest OAMPDU, in octets, supported by the Ethernet Access Port. This value is compared to the remote Maximum PDU Size and the smal… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.57 | ColumncmEthernetAccPortOamLocalMode | read-write | current | This object allows to configure the OAM sublayer entity in either Active or Passive mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.58 | ColumncmEthernetAccPortOamRemoteMacAddress | read-only | current | This object allows retrieval of the Remote Mac Address. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.59 | ColumncmEthernetAccPortOamRemoteVarRtrvsEnabled | read-only | current | This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.60 | ColumncmEthernetAccPortOamRemoteLinkEventsEnabled | read-only | current | This object allows retrieval of whether the remote OAM entity supports interpreting Link Events. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.61 | ColumncmEthernetAccPortOamRemoteOamLoopbacksSupported | read-only | current | This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.62 | ColumncmEthernetAccPortOamRemoteUnidirSupportEnabled | read-only | current | This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.63 | ColumncmEthernetAccPortOamRemoteMaxPDUSize | read-only | current | This object allows retrieval of the remote OAM entity maximum OAMPDU size. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.64 | ColumncmEthernetAccPortOamRemoteMode | read-only | current | This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.65 | ColumncmEthernetAccPortMode | read-write | current | This object allows specification of whether the Ethernet Access Port is in a connection-oriented (offering VLAN based services) mode or connection-less (offeri… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.66 | ColumncmEthernetAccPortSvcType | read-write | current | This object allows specification of whether the Ethernet Access Port provides transparent port based services, or multi-flow VLAN based services. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.67 | ColumncmEthernetAccPortRxPauseDisposition | read-write | deprecated | This object allows management of RX pause frames on Ethernet Access port. This object is applicable only for FSP150CM Release 3.1. This object is deprecated he… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.68 | ColumncmEthernetAccPortTxPauseEnabled | read-write | current | This object allows enabling/disabling transmit pause frames on Ethernet Access port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.69 | ColumncmEthernetAccPortAfpType | read-write | current | This object allows specification of the Acceptable Frame Policy on Ethernet Access port. Users can specify whether the port supports only tagged frames, only u… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.70 | ColumncmEthernetAccPortMDIXStatus | read-only | current | This object provides the current MDIX status of the Ethernet Access port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.71 | ColumncmEthernetAccPortSfpReach | read-only | current | This object provides the SFP Reach in meters. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.72 | ColumncmEthernetAccPortSfpLaserWaveLength | read-only | current | This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetAccPortMediaType is fiber. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.73 | ColumncmEthernetAccPortSfpMediaType | read-only | current | This object provides the SFP Media Type. This is applicable when cmEthernetAccPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.74 | ColumncmEthernetAccPortOamEnabled | read-write | current | This object allows to manage the EFM OAM on Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.75 | ColumncmEthernetAccPortOamAdminState | read-only | current | This object provides the EFM OAM Admin State. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.76 | ColumncmEthernetAccPortShapingEnabled | read-write | current | This object allows to manage the Access Port Shaping. When enabled, values in cmEthernetAccPortShapedSpeedLo and cmEthernetAccPortShapedSpeedHi are applicable. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.77 | ColumncmEthernetAccPortShapedSpeedLo | read-write | current | This object allows to specify the lower 32 bits of the Access Port Shaped speed. This value is applicable when cmEthernetAccPortShapingEnabled is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.78 | ColumncmEthernetAccPortShapedSpeedHi | read-write | current | This object allows to specify the higher 32 bits of the Access Port Shaped speed. This value is applicable when cmEthernetAccPortShapingEnabled is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.79 | ColumncmEthernetAccPortQinQEtherType | read-write | current | This object allows to specify the Q-in-Q Ether Type on the Access Port. Setting this value to 0 will disable the Q-in-Q override on the Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.80 | ColumncmEthernetAccPortRxPauseEnabled | read-write | current | This object allows to enable/disable the RX PAUSE on the Access Port. This object is not applicable for FSP150CM NTU Card. On NTU Card cmEthernetAccPortRxPause… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.81 | ColumncmEthernetAccPortAutoDiagEnabled | read-write | current | This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.82 | ColumncmEthernetAccPortLinkLossFwdTxActionType | read-write | current | This object allows to specify the Access Port's behavior when link loss forwarding trigger events occur on the Network Port. This provides ability to configure… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.83 | ColumncmEthernetAccPortLinkLossFwdRxRLDLinkIds | read-only | current | This object provides the received Remote Link IDs in EFM RLD messages on the Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.84 | ColumncmEthernetAccPortN2AVlanTrunkingEnabled | read-write | current | This object allows to enable or disable the VLAN trunking on Ethernet Access port. Disabling VLAN trunking removes all VLAN tags before transmitting traffic ou… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.85 | ColumncmEthernetAccPortA2NPushPVIDEnabled | read-write | current | This object allows to specify whether cmEthernetAccPortPortVlanId value will be PUSHed on untagged frames or not in the Access to Network direction. This objec… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.86 | ColumncmEthernetAccPortN2APopPVIDEnabled | read-write | current | This object allows to specify whether cmEthernetAccPortPortVlanId value will be POPed in the Network to Access direction. This object is only applicable for co… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.87 | ColumncmEthernetAccPortPortVlanId | read-write | current | This object allows to specify the Ethernet Access Port VLAN Id to PUSH on untagged frames in the Access to Network direction. This object is only applicable fo… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.88 | ColumncmEthernetAccPortPortVlanPriority | read-write | current | This object allows to specify the Ethernet Access Port VLAN Priority for the PUSHed VLAN tag (specified by cmEthernetAccPortPortVlanId) on untagged frames in t… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.89 | ColumncmEthernetAccPortPrioMapMode | read-write | current | This object allows to specify the Ethernet Access Port Priority Mapping Mode used for classification of frames. This object is only applicable for connection-o… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.90 | ColumncmEthernetAccPortSyncEEnabled | read-write | current | This object allows to specify whether the Ethernet Access Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.91 | ColumncmEthernetAccPortQLModeEnabled | read-write | current | This object allows to specify whether the Ethernet Access Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet cap… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.92 | ColumncmEthernetAccPortExpectedQL | read-write | current | This object allows to specify the expected QL when the Ethernet Access Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet cap… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.93 | ColumncmEthernetAccPortAssumedQL | read-write | current | This object allows to specify the assumed QL on the Ethernet Access Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.94 | ColumncmEthernetAccPortReceivedQL | read-only | current | This object provides the Received QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable.This… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.95 | ColumncmEthernetAccPortTransmitQL | read-only | current | This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable. … |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.96 | ColumncmEthernetAccPortDeiEnable | read-write | deprecated | This is a port level control to reset the DEI (Drop Eligibility Indicator) bit in the S-Tag, if the downstream equipment supports S-Tag TPID (EtherType) but ca… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.97 | ColumncmEthernetAccPortPcpDEEncType | read-write | current | This is a port level control that specifies the mode of drop eligibility encoding in PCP bits of the VLAN tag. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.98 | ColumncmEthernetAccPortPcpDEPairsAction | read-write | current | This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetAccPortPcpDEEncType is of type 7p1d, 6p2d, … |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.99 | ColumncmEthernetAccPortSSMRemoteMacAddress | read-only | current | This object allows retrieval of the Remote Mac Address, when the port is peering using SSM. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.100 | ColumncmEthernetAccPortXgePhyType | read-write | current | This object allows to specify the PHY type of 10G Ethernet Port. 10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY and port rate in… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.101 | ColumncmEthernetAccPortLoopbackSourceMacControlEnabled | read-write | current | This object allows to Enable/Disable the Acc Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remot… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.102 | ColumncmEthernetAccPortLoopbackDestMacControlEnabled | read-write | current | This object allows to Enable/Disable the Acc Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.103 | ColumncmEthernetAccPortLoopbackSourceMacAddress | read-write | current | This object allows to set Acc Port Source MAC Address for frame matching when Acc Port Source MAC Control is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.104 | ColumncmEthernetAccPortLoopbackDestMacAddress | read-write | current | This object allows to set Acc Port Destination MAC Address for frame matching when Acc Port Destination MAC Control is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.105 | ColumncmEthernetAccPortLoopbackBlockingEnabled | read-write | current | This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.106 | ColumncmEthernetAccPortRxDeiAction | read-write | current | This object allows to specify the Receive DEI Action. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.107 | ColumncmEthernetAccPortTxDeiAction | read-write | current | This object allows to specify the Transmit DEI Action. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.108 | ColumncmEthernetAccPortRxDeiOuterTagType | read-write | current | This object allows to specify the Receive DEI Outer Tag Type. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.109 | ColumncmEthernetAccPortTxDeiOuterTagType | read-write | current | This object allows to specify the Transmit DEI Outer Tag Type. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.110 | ColumncmEthernetAccPortLaserWDMChannel | read-write | current | Channel number of WDM tunable XFP setting. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.111 | ColumncmEthernetAccPortLaserIsTunable | read-only | current | Channel number of WDM tunable XFP setting. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.112 | ColumncmEthernetAccPortLaserFrequency | read-only | current | Channel number of WDM tunable XFP setting. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.113 | ColumncmEthernetAccPortMediaTypeAutoSelected | read-only | current | This object provides the auto selected Ethernet Media of the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.114 | ColumncmEthernetAccPortLowLatencyQueuingEnabled | read-write | current | This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.115 | ColumncmEthernetAccPortA2nSwapPriorityVIDEnabled | read-write | current | This object allows to Enable/Disable the Swapping of Priority Vlan Id in the A2N direction. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.116 | ColumncmEthernetAccPortN2aSwapPriorityVIDEnabled | read-write | current | This object allows to Enable/Disable the Swapping of Priority Vlan Id in the N2A direction. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.117 | ColumncmEthernetAccPortSwapPriorityVID | read-write | current | This object allows to specify the value of Vlan Id for the Swapping of Priority Vlan Id operation for both the A2N and N2A direction. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.118 | ColumncmEthernetAccPortDiagnosticMacAddress | read-only | current | This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc. |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.119 | ColumncmEthernetAccPortIngressCOSPriority | read-write | deprecated | Indicates which VLAN tag to use for PCP Priority to COS mapping when the port Priority Map Mode is 802.1p. Supported values are inner-vlantag and outer-vlantag… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.120 | ColumncmEthernetAccPortDefaultCOS | read-write | deprecated | The COS assigned to a frame that does not have a valid COS identifier for the Priority Map Mode of the port. This attribute is only applicable on products when… |
| 1.3.6.1.4.1.2544.1.12.4.1.1.1.121 | ColumncmEthernetAccPortTrafficModel | read-write | current | The Traffic Management connection model available for the port. - accessFlow: NID Traffic Connection model. - flowpoint: Multipoint and Aggregation Traffic Con… |
| 1.3.6.1.4.1.2544.1.12.4.1.2 | TablecmEthernetAccPortCpdTable | not-accessible | current | A list of entries corresponding to Ethernet Access Port Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x. |
| 1.3.6.1.4.1.2544.1.12.4.1.2.1 | RowcmEthernetAccPortCpdEntry | not-accessible | current | A conceptual row in the cmEthernetAccPortCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.2.1.1 | ColumncmEthernetAccPortCpdIndex | read-only | current | An arbitrary integer index value used to uniquely identify this CPD Service Entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.2.1.2 | ColumncmEthernetAccPortCpdFilterType | read-only | current | This enables specification of type of CPD Filter. |
| 1.3.6.1.4.1.2544.1.12.4.1.2.1.3 | ColumncmEthernetAccPortCpdFilterDescr | read-only | current | This provides description of CPD Filter. |
| 1.3.6.1.4.1.2544.1.12.4.1.2.1.4 | ColumncmEthernetAccPortCpdDispType | read-write | current | This enables specification of disposion type of CPD Filter. |
| 1.3.6.1.4.1.2544.1.12.4.1.2.1.5 | ColumncmEthernetAccPortCpdMacAddressMatch | read-write | current | This enables provides the Filter MAC Address to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.2.1.6 | ColumncmEthernetAccPortCpdMacAddressMask | read-write | current | This enables provides the Filter MAC Address Mask to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.2.1.7 | ColumncmEthernetAccPortCpdEthertype | read-write | current | This enables provides the Filter Ethertype to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.2.1.8 | ColumncmEthernetAccPortCpdEthertypeMask | read-write | current | This enables provides the Filter Ethertype Mask to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.2.1.9 | ColumncmEthernetAccPortCpdSubtype | read-write | current | This enables provides the Filter Subtype to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.2.1.10 | ColumncmEthernetAccPortCpdSubtypeMask | read-write | current | This enables provides the Filter Subtype Mask to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.3 | TablecmEthernetAccPortClbTable | not-accessible | current | A list of entries corresponding to Ethernet Access Port Cable Length Benchmark. |
| 1.3.6.1.4.1.2544.1.12.4.1.3.1 | RowcmEthernetAccPortClbEntry | not-accessible | current | A conceptual row in the cmEthernetAccPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.3.1.1 | ColumncmEthernetAccPortClbIndex | read-only | current | An integer index value used to uniquely identify this Cable Length Benchmark Entry specification. |
| 1.3.6.1.4.1.2544.1.12.4.1.3.1.2 | ColumncmEthernetAccPortClbEnabled | read-write | current | This enables specification of Cable Length Benchmark entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.3.1.3 | ColumncmEthernetAccPortClbLength | read-write | current | Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the … |
| 1.3.6.1.4.1.2544.1.12.4.1.3.1.4 | ColumncmEthernetAccPortClbDescr | read-write | current | A textual string containing description of cable span. |
| 1.3.6.1.4.1.2544.1.12.4.1.4 | TablecmFlowTable | not-accessible | current | A list of entries corresponding to Ethernet Flows for configuration purposes. If the corresponding Ethernet Access Port's cmEthernetAccPortMode is connection-o… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1 | RowcmFlowEntry | not-accessible | current | A conceptual row in the cmFlowTable. These entries represent an Ethernet Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.1 | ColumncmFlowIndex | read-create | current | The integer index value corresponding to an Ethernet Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.2 | ColumncmFlowCircuitName | read-create | current | This object allows SNMP management entities to provide a circuit identifier with the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.3 | ColumncmFlowAdminState | read-write | current | This object represents the Administrative State of the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.4 | ColumncmFlowOperationalState | read-only | current | This object represents the Operational State of the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.5 | ColumncmFlowSecondaryState | read-only | current | This object represents the Secondary State of the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.6 | ColumncmFlowType | read-create | current | This object represents the type of the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.7 | ColumncmFlowMultiCOS | read-create | current | This object allows specification of multiple COS (Class of Service) Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.8 | ColumncmFlowA2NCIR | read-create | current | This object represents the Commited Information Rate(CIR) of an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this o… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.9 | ColumncmFlowA2NEIR | read-create | current | This object represents the Excess Information Rate(EIR) on an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this obj… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.10 | ColumncmFlowN2ARateLimitingEnabled | read-create | current | This object allows management of the N2A rate limiting, independent of A2N rate limiting. When not enabled, N2A specification is the same as A2N. This object i… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.11 | ColumncmFlowN2ACIR | read-create | current | This object represents the Commited Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. For a portbased Flow, this object is not settabl… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.12 | ColumncmFlowN2AEIR | read-create | current | This object represents the Excess Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. For a portbased Flow, this object is not settable.… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.13 | ColumncmFlowStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.14 | ColumncmFlowRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.15 | ColumncmFlowTrafficType | read-only | current | This object provides information on the type of traffic flow supported by the system, i.e.'shaped-only' flows (support only shaping) or 'policed-shaped' (suppo… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.16 | ColumncmFlowCOS | read-create | current | This object allows specification of the COS (Class of Service) value for the Traffic Flow. This value is used at flow creation time to identify the COS level o… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.17 | ColumncmFlowVlanMemberList | read-create | current | This object is applicable only when Port is in connection-oriented evpl mode. This attribute is mandatory if creation of connection-oriented evpl regular flow … |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.18 | ColumncmFlowAction | read-write | current | This object is applicable only when Port is in connection-oriented evpl mode and the cmFlowType is regular. This object allows to add or remove the VLAN member… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.19 | ColumncmFlowActionVlan | read-create | current | This object is applicable only when Port is in connection-oriented evpl mode. This object allows adding/removing VLAN members to a connection-oriented evpl reg… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.20 | ColumncmFlowUntaggedMemberEnabled | read-create | current | This object is applicable only when Port is in connection-oriented evpl mode for a regular flow as well as default flow. This object allows to specify whether … |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.21 | ColumncmFlowA2NCIRHi | read-create | current | This object represents the Commited Information Rate(CIR) of an Flow in the Access to Network (A2N) direction. This value represents the upper 32 bits of CIR (… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.22 | ColumncmFlowA2NEIRHi | read-create | current | This object represents the Excess Information Rate(EIR) on an Flow in the Access to Network (A2N) direction. For a portbased Flow(FSP150CM NTU, CPMR), this obj… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.23 | ColumncmFlowN2ACIRHi | read-create | current | This object represents the Commited Information Rate(CIR) of an Flow in the Network to Access (N2A) direction. This value represents the upper 32 bits of CIR (… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.24 | ColumncmFlowN2AEIRHi | read-create | current | This object represents the Excess Information Rate(EIR) on an Flow in the Network to Access (N2A) direction. For a portbased Flow(FSP150CM NTU, CPMR), this obj… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.25 | ColumncmFlowHCOSMgmtEnabled | read-create | current | This object allows management of Hierarchical COS on the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.26 | ColumncmFlowGuaranteedA2NBandwidthLo | read-write | current | This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provis… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.27 | ColumncmFlowGuaranteedA2NBandwidthHi | read-write | current | This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provis… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.28 | ColumncmFlowMaximumA2NBandwidthLo | read-write | current | This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provis… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.29 | ColumncmFlowMaximumA2NBandwidthHi | read-write | current | This object supports the Hierarchical Class of Service (HCOS) feature. It is only applicable for a flow with multiple class of services. This allows the provis… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.30 | ColumncmFlowCTagControl | read-create | current | This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swapvid' and 'none'. If the type is 'pus… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.31 | ColumncmFlowCTagVlanId | read-create | current | This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowCTagControl. It is applicable for 'push', 'swapvid' and 'p… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.32 | ColumncmFlowCTagVlanPriority | read-create | current | This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowCTagControl. It is applicable for 'push' control typ… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.33 | ColumncmFlowCTagMatchRxPrio | read-create | current | This object is used to specify whether the C-TAG priority be used or ignored for traffic in the N2A direction. This is only applicable if cmFlowCTagControl is … |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.34 | ColumncmFlowSTagControl | read-create | current | This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'swapvid', and 'none'. If the type is 'push', the VL… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.35 | ColumncmFlowSTagVlanId | read-create | current | This object allows specification of the VLAN Id to be pushed, based on the value of cmFlowSTagControl. It is applicable for 'push' control type. This object is… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.36 | ColumncmFlowSTagVlanPriority | read-create | current | This object allows specification of the VLAN Priority to be pushed, based on the value of cmFlowSTagControl. It is applicable for 'push' control type. This obj… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.37 | ColumncmFlowOuterTagPrioEnabled | read-create | current | This object is used to specify whether the flow participates in outer-tag priority swap. The Priority Mapping Table cmPrioMapTable allows the A2N outer-tag pri… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.38 | ColumncmFlowN2ACOSPriorityTagType | read-create | current | This object is used to specify whether the flow uses the inner-tag or the outer-tag in determining the COS (Class of Service) in the N2A direction. This object… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.39 | ColumncmFlowESFramesLossThreshold | read-write | current | This object is used to specify the number of frames lost per flow that starts counting Errored Seconds (ES) on the flow. This functionality is applicable if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.40 | ColumncmFlowSESFramesLossThresholdRatio | read-write | current | This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flow. This functionality is applicable … |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.41 | ColumncmFlowPolicingEnabled | read-create | current | This object is applicable only when Port is in connection-oriented mode. This object is applicable to both epl and evpl mode flows. This object allows to enabl… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.42 | ColumncmFlowPreserveSTagProperties | read-create | current | This object is applicable only when Port is in connection-oriented mode. This object is applicable to evpl mode Regular flows, when S-TAG control is specified … |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.43 | ColumncmFlowInnerTagPrioEnabled | read-create | current | This object is used to specify whether the flow participates in inner-tag (second) priority swap. The Priority Mapping Table cmPrioMapTable allows the A2N inne… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.44 | ColumncmFlowN2AOuterTagPrioEnabled | read-create | current | This object is used to specify whether the flow participates in outer-tag priority swap in the A2N direction. The Priority Mapping Table cmNetPortPrioMapTable … |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.45 | ColumncmFlowA2NShapingType | read-create | current | This object is used to specify whether the traffic in A2N direction passing through this flow is shaped by port-level or flow-level Shapers. In case of portbas… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.46 | ColumncmFlowN2AShapingType | read-create | current | This object is used to specify whether the traffic in N2A direction passing through this flow is shaped by port-level or flow-level Shapers. In case of portbas… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.47 | ColumncmFlowSTagMatchRxPrio | read-create | current | This object indicates whether the S-TAG priority is used or ignored for traffic in the N2A direction. This is only applicable if cmFlowSTagControl is 'push'. T… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.48 | ColumncmFlowAutoBandwidthConfigEnabled | read-create | current | This object is applicable for Flows on the PWE3 Ethernet Backplane Port. When set to TRUE bandwidth of this Flow will be automatically adjusted when PWE3 SATOP… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.49 | ColumncmFlowPort1 | read-create | current | This object specifies a physical or logical port on the Access side of the Flow. This can be Access Port, Access LAG or Access Split Horizion Group. In case of… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.50 | ColumncmFlowPort2 | read-create | current | This object specifies a physical or logical port on the Network side of the Flow. This can be Network Port, Network LAG, Network Split Horizion Group ERP or Pr… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.51 | ColumncmFlowPolicingControl | read-create | current | This object specifies the direction(s) in which Poling is enabled on traffic within this Flow when cmFlowPolicingEnabled is TRUE. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.52 | ColumncmFlowAutoCIRPercentage | read-create | current | This object specifies the percentage of available CIR on the Network ports assigned to this Flow when cmFlowAutoBandwidthConfigEnabled is TRUE. The flow guaran… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.53 | ColumncmFlowLoopAvoidanceObject | read-create | current | This object specifies the Loop Avoidance instance to which this Flow belongs. This object is appicable only for Transparent Flow and should point to the ERP in… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.54 | ColumncmFlowConfigType | read-only | current | This object specifies if this Flow is an Access Flow or Pass-thru Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.55 | ColumncmFlowN2NForwardingEnabled | read-create | current | This object is used to specify whether n2n forwarding is enabled on particular Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.56 | ColumncmFlowA2NMulticastRateLimitControl | read-write | current | Whether multicast frames are limited per Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.57 | ColumncmFlowA2NMulticastRateLimitLo | read-write | current | The rate limit for multicast packets per Flow. When cmFlowA2NMulticastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.58 | ColumncmFlowA2NMulticastRateLimitHi | read-write | current | The rate limit for multicast packets per Flow. When cmFlowA2NMulticastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.59 | ColumncmFlowA2NBroadcastRateLimitControl | read-write | current | Whether broadcast frames are limited per Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.60 | ColumncmFlowA2NBroadcastRateLimitLo | read-write | current | The rate limit for multicast packets per Flow. When cmFlowA2NBroadcastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.61 | ColumncmFlowA2NBroadcastRateLimitHi | read-write | current | The rate limit for multicast packets per Flow. When cmFlowA2NBroadcastRateLimiteControl is set and value is 0, then all multicast frames are dropped. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.62 | ColumncmFlowA2NCombinedRateLimitControl | read-write | current | Whether both multicast and broadcast frames are limited per Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.63 | ColumncmFlowA2NCombinedRateLimitLo | read-write | current | The rate limit for multicast packets per Flow. When cmFlowA2NCombinedRateLimiteControl is set and value is 0, then all multicast frames are dropped. This objec… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.64 | ColumncmFlowA2NCombinedRateLimitHi | read-write | current | The rate limit for multicast packets per Flow. When cmFlowA2NCombinedRateLimiteControl is set and value is 0, then all multicast frames are dropped. This objec… |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.65 | ColumncmFlowRefPrioMapProfile | read-write | current | This object used to specify the flow's profile. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.66 | ColumncmFlowRefEoMplsPwObject | read-write | current | This object specifies EoMpls Pw object OID. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.67 | ColumncmFlowRefN2APrioMapProfile | read-write | current | This object used to specify the flow's N2A direction profile. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.68 | ColumncmFlowSecureBlockingEnabled | read-write | current | This object can be used to enable/disable secure block. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.69 | ColumncmFlowRefConnectGuardFlowList | read-write | current | This object specifies the secure flow list, it should be f3ConnectGuardFlowIndex value list split with comma. |
| 1.3.6.1.4.1.2544.1.12.4.1.4.1.70 | ColumncmFlowSecureStateList | read-only | current | This object specifies the secure state list, it should be secure state value list and split with comma. |
| 1.3.6.1.4.1.2544.1.12.4.1.5 | TablecmFlowCpdTable | not-accessible | current | A list of entries corresponding to Flow Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x. |
| 1.3.6.1.4.1.2544.1.12.4.1.5.1 | RowcmFlowCpdEntry | not-accessible | current | A conceptual row in the cmFlowCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.5.1.1 | ColumncmFlowCpdIndex | read-only | current | An arbitrary integer index value used to uniquely identify this CPD Service Entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.5.1.2 | ColumncmFlowCpdFilterType | read-only | current | This enables specification of type of CPD Filter. |
| 1.3.6.1.4.1.2544.1.12.4.1.5.1.3 | ColumncmFlowCpdFilterDescr | read-only | current | This provides description of CPD Filter. |
| 1.3.6.1.4.1.2544.1.12.4.1.5.1.4 | ColumncmFlowCpdDispType | read-write | current | This enables specification of disposion type of CPD Filter. |
| 1.3.6.1.4.1.2544.1.12.4.1.5.1.5 | ColumncmFlowCpdMacAddressMatch | read-write | current | This enables provides the Filter MAC Address to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.5.1.6 | ColumncmFlowCpdMacAddressMask | read-write | current | This enables provides the Filter MAC Address Mask to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.5.1.7 | ColumncmFlowCpdEthertype | read-write | current | This enables provides the Filter Ethertype to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.5.1.8 | ColumncmFlowCpdEthertypeMask | read-write | current | This enables provides the Filter Ethertype Mask to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.5.1.9 | ColumncmFlowCpdSubtype | read-write | current | This enables provides the Filter Subtype to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.5.1.10 | ColumncmFlowCpdSubtypeMask | read-write | current | This enables provides the Filter Subtype Mask to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.6 | TablecmQosShaperTable | not-accessible | current | A list of entries corresponding to Ethernet Quality of Service Shaper for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1 | RowcmQosShaperEntry | not-accessible | current | A conceptual row in the cmQosShaperTable. These entries represent a Quality of Service Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.1 | ColumncmQosShaperTypeIndex | read-create | current | The unique index value corresponding to a Quality of Service Shaper's direction. Values 1 and 2 are applicable to the Access Flow Shaper: - value of 1 stands f… |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.2 | ColumncmQosShaperIndex | read-create | current | The unique integer index value corresponding to a Quality of Service Shaper. In release 5.6CC the range is extended to 1..16 to support duplicate A2N shapers o… |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.3 | ColumncmQosShaperDirection | read-only | current | The direction of the Quality of Service Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.4 | ColumncmQosShaperAdminState | read-write | current | This object represents the Administrative State of the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.5 | ColumncmQosShaperOperationalState | read-only | current | This object represents the Operational State of the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.6 | ColumncmQosShaperSecondaryState | read-only | current | This object represents the Secondary State of the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.7 | ColumncmQosShaperCIR | read-create | current | This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.8 | ColumncmQosShaperCBS | read-create | current | This object represents the Commited Burst Size (CBS) of the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.9 | ColumncmQosShaperEIR | read-create | current | This object represents the Excess Information Rate(EIR) (Lower 32 bits) of a Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.10 | ColumncmQosShaperEBS | read-create | current | This object represents the Excess Burst Size (EBS) of the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.11 | ColumncmQosShaperBufferSize | read-create | current | This object represents the Buffer Size of the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.12 | ColumncmQosShaperStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.13 | ColumncmQosShaperRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.14 | ColumncmQosShaperCOS | read-only | current | This object provides the COS (Class of Service) value for the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.15 | ColumncmQosShaperCIRHi | read-create | current | This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.16 | ColumncmQosShaperEIRHi | read-create | current | This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.17 | ColumncmQosShaperSoamCIRLo | read-create | current | This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits) of a Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.18 | ColumncmQosShaperSoamCIRHi | read-create | current | This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) on the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.19 | ColumncmQosShaperSoamEIRLo | read-create | current | This object represents the Soam Excess Information Rate(SOAM-EIR) (Lower 32 bits) of a Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.20 | ColumncmQosShaperSoamEIRHi | read-create | current | This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.21 | ColumncmQosShaperWredGreenMinQueueThreshold | read-create | current | This object represents the Wred green packet min queue threshold value. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.22 | ColumncmQosShaperWredGreenMaxQueueThreshold | read-create | current | This object represents the Wred green packet max queue threshold value. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.23 | ColumncmQosShaperWredGreenDropProbability | read-create | current | This object represents the Wred green packet drop probability. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.24 | ColumncmQosShaperWredYellowMinQueueThreshold | read-create | current | This object represents the Wred yellow packet min queue threshold value. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.25 | ColumncmQosShaperWredYellowMaxQueueThreshold | read-create | current | This object represents the Wred yellow packet max queue threshold value. |
| 1.3.6.1.4.1.2544.1.12.4.1.6.1.26 | ColumncmQosShaperWredYellowDropProbability | read-create | current | This object represents the Wred yellow packet drop probability. |
| 1.3.6.1.4.1.2544.1.12.4.1.7 | TablecmEthernetNetPortTable | not-accessible | current | A list of entries corresponding to Ethernet Network Port Facilities for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1 | RowcmEthernetNetPortEntry | not-accessible | current | A conceptual row in the cmEthernetNetPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.1 | ColumncmEthernetNetPortIndex | read-only | current | An integer index value used to uniquely identify this Ethernet Network Port within a card. Note that each Ethernet Network Port is uniquely identified by the i… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.2 | ColumncmEthernetNetPortIfIndex | read-only | current | This object has the same value as ifIndex for Ethernet Network Port. An integer index value used to uniquely identify this Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.3 | ColumncmEthernetNetPortEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.4 | ColumncmEthernetNetPortAdminState | read-write | current | This object represents the Administrative State of the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.5 | ColumncmEthernetNetPortOperationalState | read-only | current | This object represents the Operational State of the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.6 | ColumncmEthernetNetPortSecondaryState | read-only | current | This object represents the Secondary State of the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.7 | ColumncmEthernetNetPortMTU | read-write | current | This object provides the MTU on the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.8 | ColumncmEthernetNetPortMediaType | read-write | current | This object represents the type of Ethernet Media on the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.9 | ColumncmEthernetNetPortConfigSpeed | read-write | current | This object allows to configure the speed of the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.10 | ColumncmEthernetNetPortNegotiatedSpeed | read-only | current | This object provides the negotiated speed of the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.11 | ColumncmEthernetNetPortMDIXType | read-write | current | This object allows management of MDIX property on Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.12 | ColumncmEthernetNetPortJumboFramesEnabled | read-write | current | This object allows enabling/disabling jumbo frames support on the Ethernet Network Port. This object is only applicable for Ethernet Network Port on R3.1CM NTU… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.13 | ColumncmEthernetNetPortSfpVendorName | read-only | current | This object provides the vendor name of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.14 | ColumncmEthernetNetPortSfpPartNumber | read-only | current | This object provides the part number of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.15 | ColumncmEthernetNetPortSfpSerialNumber | read-only | current | This object provides the serial number of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.16 | ColumncmEthernetNetPortSfpDateOfManufacture | read-only | current | This object provides the date of manufacture of the SFP. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.17 | ColumncmEthernetNetPortSfpConnectorValue | read-only | current | This object provides the SFP connector value. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.18 | ColumncmEthernetNetPortInitiateDiag | read-write | current | This object allows to initiate Etherjack diagnosis on the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.19 | ColumncmEthernetNetPortDiagnosePair1Cond | read-only | current | This object provides diagnosis results for the cable Pair 1 on Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.20 | ColumncmEthernetNetPortDiagnosePair2Cond | read-only | current | This object provides diagnosis results for the cable Pair 2 on Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.21 | ColumncmEthernetNetPortDiagnosePair3Cond | read-only | current | This object provides diagnosis results for the cable Pair 3 on Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.22 | ColumncmEthernetNetPortDiagnosePair4Cond | read-only | current | This object provides diagnosis results for the cable Pair 4 on Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.23 | ColumncmEthernetNetPortDiagnoseAutoNegCond | read-only | current | This object provides auto negotiation results of the diagnosis test on Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.24 | ColumncmEthernetNetPortDiagnoseLpbkCond | read-only | current | This object provides port loopback results of the diagnosis test on Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.25 | ColumncmEthernetNetPortDiagnoseEfmLpbkCond | read-only | current | This object provides remote EFM loopback results of the diagnosis test on Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.26 | ColumncmEthernetNetPortDiagnoseResult | read-only | current | This object provides results of the diagnosis test in string form on Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.27 | ColumncmEthernetNetPortDiagnoseTestStatus | read-only | current | This object provides the current status of the diagnosis test on Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.28 | ColumncmEthernetNetPortDiagnoseTestTime | read-only | current | This object provides the time when diagnosis test was last executed. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.29 | ColumncmEthernetNetPortLoopbackConfig | read-write | current | This object allows to initiate loopbacks on on the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.30 | ColumncmEthernetNetPortLoopbackStatus | read-only | current | This object provides status of the current loopback on the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.31 | ColumncmEthernetNetPortLoopbackTime | read-write | current | This object allows to specify time for timed-loopbacks on on the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.32 | ColumncmEthernetNetPortLoopbackSwapSADA | read-write | current | This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.33 | ColumncmEthernetNetPortOuterVlanLoopbackMask | read-write | current | This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be speci… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.34 | ColumncmEthernetNetPortOuterVlanLoopback1 | read-write | current | This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.35 | ColumncmEthernetNetPortOuterVlanLoopback2 | read-write | current | This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.36 | ColumncmEthernetNetPortOuterVlanLoopback3 | read-write | current | This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.37 | ColumncmEthernetNetPortInnerVlanLoopbackMask | read-write | current | This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be speci… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.38 | ColumncmEthernetNetPortInnerVlanLoopback1 | read-write | current | This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.39 | ColumncmEthernetNetPortInnerVlanLoopback2 | read-write | current | This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.40 | ColumncmEthernetNetPortInnerVlanLoopback3 | read-write | current | This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.41 | ColumncmEthernetNetPortLinkLossFwdEnabled | read-write | current | This object allows enabling/disabling link loss forwarding on the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.42 | ColumncmEthernetNetPortLinkLossFwdSignalType | read-write | deprecated | This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetNetPortLinkLossFwdEnabled is enabled. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.43 | ColumncmEthernetNetPortLinkLossFwdTriggerTypes | read-write | current | This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetAccPortLinkLossFwdEnabled is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.44 | ColumncmEthernetNetPortLinkLossFwdDelay | read-write | current | This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.45 | ColumncmEthernetNetPortLinkLossFwdActive | read-only | current | This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.46 | ColumncmEthernetNetPortLinkLossFwdPartnerEnabled | read-only | current | This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.47 | ColumncmEthernetNetPortLinkLossFwdLocalLinkId | read-write | current | This object allows configuration of the Local Link Id on Ethernet Network port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.48 | ColumncmEthernetNetPortLinkLossFwdRemoteLinkIds | read-write | current | This object allows enabling/disabling Remote Link Ids on Ethernet Network port. By setting the appropriate bit positions, the Ethernet Network port is able to … |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.49 | ColumncmEthernetNetPortOamId | read-only | current | OAM Id. This is unique EFM OAM sublayer port id. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.50 | ColumncmEthernetNetPortOamAdminDisposition | read-write | deprecated | Ethernet Network Port's EFM OAM Administrative Disposition. This object is applicable only for FSP150CM Release 3.1. This object is deprecated henceforth. With… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.51 | ColumncmEthernetNetPortOamDiscoveryState | read-only | current | Ethernet Network Port's OAM discovery state. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.52 | ColumncmEthernetNetPortOamLocalVarRtrvsEnabled | read-only | current | This object allows specification of whether the Ethernet Network Port supports sending variable response OAMPDUs. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.53 | ColumncmEthernetNetPortOamLocalLinkEventsEnabled | read-only | current | This object allows specification of whether the Ethernet Network Port supports interpreting Link Events. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.54 | ColumncmEthernetNetPortOamLocalOamLoopbacksSupported | read-write | current | This object allows specification of whether the Ethernet Network Port is capable of OAM remote loopback mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.55 | ColumncmEthernetNetPortOamLocalUnidirSupportEnabled | read-only | current | This object allows specification of whether the Ethernet Network Port is capable of sending OAMPDUs when the receive path is non-operational. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.56 | ColumncmEthernetNetPortOamLocalMaxPDUSize | read-only | current | This object represents the largest OAMPDU, in octets, supported by the Ethernet Network Port. This value is compared to the remote Maximum PDU Size and the sma… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.57 | ColumncmEthernetNetPortOamLocalMode | read-write | current | This object allows to configure the OAM sublayer entity in either Active or Passive mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.58 | ColumncmEthernetNetPortOamRemoteMacAddress | read-only | current | This object allows retrieval of the Remote Mac Address. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.59 | ColumncmEthernetNetPortOamRemoteVarRtrvsEnabled | read-only | current | This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.60 | ColumncmEthernetNetPortOamRemoteLinkEventsEnabled | read-only | current | This object allows retrieval of whether the remote OAM entity supports interpreting Link Events. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.61 | ColumncmEthernetNetPortOamRemoteOamLoopbacksSupported | read-only | current | This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.62 | ColumncmEthernetNetPortOamRemoteUnidirSupportEnabled | read-only | current | This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.63 | ColumncmEthernetNetPortOamRemoteMaxPDUSize | read-only | current | This object allows retrieval of the remote OAM entity maximum OAMPDU size. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.64 | ColumncmEthernetNetPortOamRemoteMode | read-only | current | This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.65 | ColumncmEthernetNetPortRxPauseDisposition | read-write | current | This object allows enabling/disabling receive pause frames on Ethernet Network port. This object is not applicable for FSP150CC Release 4.1 products. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.66 | ColumncmEthernetNetPortTxPauseEnabled | read-write | current | This object allows enabling/disabling transmit pause frames on Ethernet Network port. This object is not applicable for FSP150CC Release 4.1 products. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.67 | ColumncmEthernetNetPortAfpType | read-write | current | This object allows specification of the Acceptable Frame Policy on Ethernet Network port. Users can specify whether the port supports only tagged frames, only … |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.68 | ColumncmEthernetNetPortMDIXStatus | read-only | current | This object provides the current MDIX status of the Ethernet Network port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.69 | ColumncmEthernetNetPortSfpReach | read-only | current | This object provides the SFP Reach in meters. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.70 | ColumncmEthernetNetPortSfpLaserWaveLength | read-only | current | This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetNetPortMediaType is fiber. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.71 | ColumncmEthernetNetPortSfpMediaType | read-only | current | This object provides the SFP Media Type. This is applicable when cmEthernetNetPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.72 | ColumncmEthernetNetPortOamEnabled | read-write | current | This object allows to manage the EFM OAM on Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.73 | ColumncmEthernetNetPortOamAdminState | read-only | current | This object provides the EFM OAM Admin State. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.74 | ColumncmEthernetNetPortShapingEnabled | read-write | current | This object allows to manage the Network Port Shaping. When enabled, values in cmEthernetNetPortShapedSpeedLo and cmEthernetNetPortShapedSpeedHi are applicable. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.75 | ColumncmEthernetNetPortShapedSpeedLo | read-write | current | This object allows to specify the lower 32 bits of the Network Port Shaped speed. This value is applicable when cmEthernetNetPortShapingEnabled is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.76 | ColumncmEthernetNetPortShapedSpeedHi | read-write | current | This object allows to specify the higher 32 bits of the Network Port Shaped speed. This value is applicable when cmEthernetNetPortShapingEnabled is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.77 | ColumncmEthernetNetPortQinQEtherType | read-write | current | This object allows to specify the Q-in-Q Ether Type on the Network Port. Setting this value to 0 will disable the Q-in-Q override on the Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.78 | ColumncmEthernetNetPortLinkLossFwdTxActionType | read-write | current | This object allows to specify the Network Port's behavior when link loss forwarding trigger events occur on the Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.79 | ColumncmEthernetNetPortLinkLossFwdRxRLDLinkIds | read-only | current | This object provides the received Remote Link IDs in EFM RLD messages on the Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.80 | ColumncmEthernetNetPortAutoDiagEnabled | read-write | current | This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.81 | ColumncmEthernetNetPortSyncEEnabled | read-write | current | This object allows to specify whether the Ethernet Network Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronou… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.82 | ColumncmEthernetNetPortQLModeEnabled | read-write | current | This object allows to specify whether the Ethernet Network Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet ca… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.83 | ColumncmEthernetNetPortExpectedQL | read-write | current | This object allows to specify the expected QL when the Ethernet Network Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet ca… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.84 | ColumncmEthernetNetPortAssumedQL | read-write | current | This object allows to specify the assumed QL on the Ethernet Network Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed Q… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.85 | ColumncmEthernetNetPortReceivedQL | read-only | current | This object provides the Received QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable.This… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.86 | ColumncmEthernetNetPortTransmitQL | read-only | current | This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port's QL Mode is disabled, then the received QL value is not applicable. … |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.87 | ColumncmEthernetNetPortPrioMapMode | read-only | current | This object provides the Priority Mapping Mode used for classification of frames. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.88 | ColumncmEthernetNetPortDeiEnable | read-write | deprecated | This is a port level control to reset the DEI (Drop Eligibility Indicator) bit in the S-Tag, if the downstream equipment supports S-Tag TPID (EtherType) but ca… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.89 | ColumncmEthernetNetPortPcpDEEncType | read-write | current | This is a port level control that specifies the mode of drop eligibility encoding in PCP bits of the VLAN tag. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.90 | ColumncmEthernetNetPortPcpDEPairsAction | read-write | current | This object allows the SNMP user to manage the Priority Code Point (PCP) Drop Eligibility Pairs. When the cmEthernetNetPortPcpDEEncType is of type 7p1d, 6p2d, … |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.91 | ColumncmEthernetNetPortSSMRemoteMacAddress | read-only | current | This object allows retrieval of the Remote Mac Address, when the port is peering using SSM. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.92 | ColumncmEthernetNetPortXgePhyType | read-write | current | This object allows to specify the PHY type of 10G Ethernet Port. 10G ports can operate in LAN-PHY or WAN-PHY mode. The default mode is LAN-PHY and port rate in… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.93 | ColumncmEthernetNetPortLoopbackSourceMacControlEnabled | read-write | current | This object allows to Enable/Disable the Net Port Source MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-remot… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.94 | ColumncmEthernetNetPortLoopbackDestMacControlEnabled | read-write | current | This object allows to Enable/Disable the Net Port Destination MAC Address frame matching criteria for all streams. Not applicable for: efm-oam-remote, efm-oam-… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.95 | ColumncmEthernetNetPortLoopbackSourceMacAddress | read-write | current | This object allows to set Net Port Source MAC Address for frame matching when Net Port Source MAC Control is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.96 | ColumncmEthernetNetPortLoopbackDestMacAddress | read-write | current | This object allows to set Net Port Destination MAC Address for frame matching when Net Port Destination MAC Control is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.97 | ColumncmEthernetNetPortLoopbackBlockingEnabled | read-write | current | This object allows frame blocking when loopback is active. - True: Blocks frames in the non-loopback direction that match the PORT or VLAN received in the non-… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.98 | ColumncmEthernetNetPortRxDeiAction | read-write | current | This object allows to specify the Receive DEI Action. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.99 | ColumncmEthernetNetPortTxDeiAction | read-write | current | This object allows to specify the Transmit DEI Action. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.100 | ColumncmEthernetNetPortRxDeiOuterTagType | read-write | current | This object allows to specify the Receive DEI Outer Tag Type. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.101 | ColumncmEthernetNetPortTxDeiOuterTagType | read-write | current | This object allows to specify the Transmit DEI Outer Tag Type. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.102 | ColumncmEthernetNetPortLaserWDMChannel | read-write | current | Channel number of WDM tunable XFP setting. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.103 | ColumncmEthernetNetPortLaserIsTunable | read-only | current | Channel number of WDM tunable XFP setting. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.104 | ColumncmEthernetNetPortLaserFrequency | read-only | current | Channel number of WDM tunable XFP setting. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.105 | ColumncmEthernetNetPortMediaTypeAutoSelected | read-only | current | This object provides the auto selected Ethernet Media of the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.106 | ColumncmEthernetNetPortLowLatencyQueuingEnabled | read-write | current | This object allows to Enable/Disable the Low Latency Queuing on the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.107 | ColumncmEthernetNetPortDiagnosticMacAddress | read-only | current | This object describes the diagnose mac address for SAT, ECPA, JDSU, Loopback with Override SA etc. |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.108 | ColumncmEthernetNetPortIngressCOSPriority | read-write | deprecated | Indicates the VLAN tag to use for PCP Priority to COS mapping when the port Priority Map Mode is 802.1p. Supported values are inner-vlantag and outer-vlantag. … |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.109 | ColumncmEthernetNetPortDefaultCOS | read-write | deprecated | The COS assigned to a frame that does not have a valid COS identifier for the Priority Map Mode of the port. This attribute is only applicable on products when… |
| 1.3.6.1.4.1.2544.1.12.4.1.7.1.110 | ColumncmEthernetNetPortTrafficModel | read-write | current | The Traffic Management connection model available for the port. - accessFlow: NID Traffic Connection model. - flowpoint: Multipoint and Aggregation Traffic Con… |
| 1.3.6.1.4.1.2544.1.12.4.1.8 | TablecmEthernetNetPortCpdTable | not-accessible | current | A list of entries corresponding to Ethernet Network Port Control Protocol Disposition. This table is only applicable for FSP150CM Hub Shelf Release 3.x. |
| 1.3.6.1.4.1.2544.1.12.4.1.8.1 | RowcmEthernetNetPortCpdEntry | not-accessible | current | A conceptual row in the cmEthernetNetPortCpdTable. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.8.1.1 | ColumncmEthernetNetPortCpdIndex | read-only | current | An arbitrary integer index value used to uniquely identify this CPD Service Entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.8.1.2 | ColumncmEthernetNetPortCpdFilterType | read-only | current | This enables specification of type of CPD Filter. |
| 1.3.6.1.4.1.2544.1.12.4.1.8.1.3 | ColumncmEthernetNetPortCpdFilterDescr | read-only | current | This provides description of CPD Filter. |
| 1.3.6.1.4.1.2544.1.12.4.1.8.1.4 | ColumncmEthernetNetPortCpdDispType | read-write | current | This enables specification of disposion type of CPD Filter. |
| 1.3.6.1.4.1.2544.1.12.4.1.8.1.5 | ColumncmEthernetNetPortCpdMacAddressMatch | read-write | current | This enables provides the Filter MAC Address to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.8.1.6 | ColumncmEthernetNetPortCpdMacAddressMask | read-write | current | This enables provides the Filter MAC Address Mask to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.8.1.7 | ColumncmEthernetNetPortCpdEthertype | read-write | current | This enables provides the Filter Ethertype to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.8.1.8 | ColumncmEthernetNetPortCpdEthertypeMask | read-write | current | This enables provides the Filter Ethertype Mask to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.8.1.9 | ColumncmEthernetNetPortCpdSubtype | read-write | current | This enables provides the Filter Subtype to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.8.1.10 | ColumncmEthernetNetPortCpdSubtypeMask | read-write | current | This enables provides the Filter Subtype Mask to match. |
| 1.3.6.1.4.1.2544.1.12.4.1.9 | TablecmEthernetMgmtPortTable | not-accessible | current | A list of entries corresponding to Ethernet Management Port Facilities for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.9.1 | RowcmEthernetMgmtPortEntry | not-accessible | current | A conceptual row in the cmEthernetMgmtPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.9.1.1 | ColumncmEthernetMgmtPortIndex | read-only | current | An integer index value used to uniquely identify this Ethernet Management Port within a card. Note that each Ethernet Management Port is uniquely identified by… |
| 1.3.6.1.4.1.2544.1.12.4.1.9.1.2 | ColumncmEthernetMgmtPortEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.9.1.3 | ColumncmEthernetMgmtPortAdminState | read-write | current | This object represents the Administrative State of the Ethernet Management Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.9.1.4 | ColumncmEthernetMgmtPortOperationalState | read-only | current | This object represents the Operational State of the Ethernet Management Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.9.1.5 | ColumncmEthernetMgmtPortSecondaryState | read-only | current | This object represents the Secondary State of the Ethernet Management Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.9.1.6 | ColumncmEthernetMgmtPortMTU | read-only | current | This object provides the MTU on the Ethernet Management Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.9.1.7 | ColumncmEthernetMgmtPortConfigSpeed | read-write | current | This object allows to configure the speed of the Ethernet Management Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.9.1.8 | ColumncmEthernetMgmtPortNegotiatedSpeed | read-only | current | This object provides the negotiated speed of the Ethernet Management Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.9.1.9 | ColumncmEthernetMgmtPortMDIXType | read-write | current | This object allows management of MDIX property on Ethernet Management Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.9.1.10 | ColumncmEthernetMgmtPortMDIXStatus | read-only | current | This object provides the current MDIX status of the Ethernet Management port. |
| 1.3.6.1.4.1.2544.1.12.4.1.9.1.11 | ColumncmEthernetMgmtPortMediaType | read-only | current | This object represents the type of Ethernet Media on the Ethernet Management Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.10 | TablecmPrioMapTable | not-accessible | current | A list of entries corresponding to Ethernet Priority Mappings in multi Class of Service (COS) mode. This table is applicable only when the Access Port is in co… |
| 1.3.6.1.4.1.2544.1.12.4.1.10.1 | RowcmPrioMapEntry | not-accessible | current | A conceptual row in the cmPrioMapTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.10.1.1 | ColumncmPrioMapIndex | read-only | current | The integer index value corresponding to a priority value based on the cmEthernetAccPortPrioMapMode. In case of TOS and 8021P, valid indices are 1 to 8, in cas… |
| 1.3.6.1.4.1.2544.1.12.4.1.10.1.2 | ColumncmPrioMapInPriority | read-write | current | The integer index value corresponding to a priority value based on the cmEthernetAccPortPrioMapMode. In case of TOS and 8021P, valid indices are 0 to 7, in cas… |
| 1.3.6.1.4.1.2544.1.12.4.1.10.1.3 | ColumncmPrioMapXTagControl | read-write | current | This allows specification of whether the priority of incoming X-TAG should be swapped with cmPrioMapXTagPriority. |
| 1.3.6.1.4.1.2544.1.12.4.1.10.1.4 | ColumncmPrioMapXTagPriority | read-write | current | This allows specification of the VLAN priority that will replace the incoming X-TAG's priority. This is applicable with cmPrioMapXTagControl as 'swap'. |
| 1.3.6.1.4.1.2544.1.12.4.1.10.1.5 | ColumncmPrioMapCOS | read-write | current | This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.10.1.6 | ColumncmPrioMapOuterTagPriority | read-write | current | This allows specification of the VLAN priority that will replace the outgoing (A2N direction) outer-tag's priority. Note that, each flow participates or not in… |
| 1.3.6.1.4.1.2544.1.12.4.1.10.1.7 | ColumncmPrioMapInnerTagPriority | read-write | current | This allows specification of the VLAN priority that will replace the outgoing (A2N direction) inner-tag's (i.e. second tag) priority. Note that, each flow part… |
| 1.3.6.1.4.1.2544.1.12.4.1.11 | TablecmQosFlowPolicerTable | not-accessible | current | A list of entries corresponding to Ethernet Quality of Service Policer for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1 | RowcmQosFlowPolicerEntry | not-accessible | current | A conceptual row in the cmQosFlowPolicerTable. These entries represent a Quality of Service Policer. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.1 | ColumncmQosFlowPolicerTypeIndex | read-create | current | The unique index value corresponding to a Quality of Service Policer's direction. Values 1 and 2 are applicable to the Access Flow Policer - value of 1 stands … |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.2 | ColumncmQosFlowPolicerIndex | read-create | current | The Policer Index that represents the COS level. This is applicable in case of a Multi COS flow. Index 1 represents COS 0; Index 2 represents COS 1 and so on. … |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.3 | ColumncmQosFlowPolicerDirection | read-create | current | This object is allows specification of Policer direction as 'a2n' or 'n2a'. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.4 | ColumncmQosFlowPolicerAdminState | read-write | current | This object represents the Administrative State of the QOS Flow Policer. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.5 | ColumncmQosFlowPolicerOperationalState | read-only | current | This object represents the Operational State of the QOS Flow Policer. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.6 | ColumncmQosFlowPolicerSecondaryState | read-only | current | This object represents the Secondary State of the QOS Flow Policer. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.7 | ColumncmQosFlowPolicerCIRLo | read-create | current | This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the lower 32 bits of the CIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.8 | ColumncmQosFlowPolicerCIRHi | read-create | current | This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the upper 32 bits of the CIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.9 | ColumncmQosFlowPolicerEIRLo | read-create | current | This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the lower 32 bits of the EIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.10 | ColumncmQosFlowPolicerEIRHi | read-create | current | This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the upper 32 bits of the EIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.11 | ColumncmQosFlowPolicerCBS | read-create | current | This object allows specification of the Commited Burst Size (CBS) on Policer. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.12 | ColumncmQosFlowPolicerEBS | read-create | current | This object allows specification of the Excess Burst Size (EBS) on the Policer. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.13 | ColumncmQosFlowPolicerAlgorithm | read-only | current | This object allows specification of Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking). |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.14 | ColumncmQosFlowPolicerColorMode | read-create | current | This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.15 | ColumncmQosFlowPolicerColorMarkingFlag | read-create | deprecated | This object allows specification of Policer Color Marking Flag. The policer will set/clear the DEI (Drop Eligibility Indication) bit of the frame on an S-TAG i… |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.16 | ColumncmQosFlowPolicerCouplingFlag | read-create | current | This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bu… |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.17 | ColumncmQosFlowPolicerAssociatedShaper | read-create | current | This object allows specification of the QOS Shaper associated with this Policer. Multiple Policers can map to single Shaper. The corresponding row with the spe… |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.18 | ColumncmQosFlowPolicerStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.11.1.19 | ColumncmQosFlowPolicerRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.12 | TablecmAccPortQosShaperTable | not-accessible | current | A list of entries corresponding to Ethernet Access Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Access Port… |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1 | RowcmAccPortQosShaperEntry | not-accessible | current | A conceptual row in the cmAccPortQosShaperTable. These entries represent a Quality of Service Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.1 | ColumncmAccPortQosShaperIndex | read-create | current | The unique integer index value corresponding to a Quality of Service Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.2 | ColumncmAccPortQosShaperDirection | read-only | current | The direction of the Quality of Service Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.3 | ColumncmAccPortQosShaperAdminState | read-write | current | This object represents the Administrative State of the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.4 | ColumncmAccPortQosShaperOperationalState | read-only | current | This object represents the Operational State of the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.5 | ColumncmAccPortQosShaperSecondaryState | read-only | current | This object represents the Secondary State of the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.6 | ColumncmAccPortQosShaperCIRLo | read-create | current | This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.7 | ColumncmAccPortQosShaperCIRHi | read-create | current | This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.8 | ColumncmAccPortQosShaperEIRLo | read-create | current | This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.9 | ColumncmAccPortQosShaperEIRHi | read-create | current | This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.10 | ColumncmAccPortQosShaperCBS | read-create | current | This object represents the Commited Burst Size (CBS) of the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.11 | ColumncmAccPortQosShaperEBS | read-create | current | This object represents the Excess Burst Size (EBS) of the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.12 | ColumncmAccPortQosShaperBufferSize | read-create | current | This object represents the Buffer Size of the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.13 | ColumncmAccPortQosShaperCOS | read-only | current | This object provides the COS (Class of Service) value for the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.14 | ColumncmAccPortQosShaperSoamCIRLo | read-create | current | This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits)of a Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.15 | ColumncmAccPortQosShaperSoamCIRHi | read-create | current | This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) of a Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.16 | ColumncmAccPortQosShaperSoamEIRLo | read-create | current | This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.17 | ColumncmAccPortQosShaperSoamEIRHi | read-create | current | This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.18 | ColumncmAccPortQosShaperWredGreenMinQueueThreshold | read-create | current | This object represents the Wred green packet min queue threshold value. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.19 | ColumncmAccPortQosShaperWredGreenMaxQueueThreshold | read-create | current | This object represents the Wred green packet max queue threshold value. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.20 | ColumncmAccPortQosShaperWredGreenDropProbability | read-create | current | This object represents the Wred green packet drop probability. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.21 | ColumncmAccPortQosShaperWredYellowMinQueueThreshold | read-create | current | This object represents the Wred yellow packet min queue threshold value. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.22 | ColumncmAccPortQosShaperWredYellowMaxQueueThreshold | read-create | current | This object represents the Wred yellow packet max queue threshold value. |
| 1.3.6.1.4.1.2544.1.12.4.1.12.1.23 | ColumncmAccPortQosShaperWredYellowDropProbability | read-create | current | This object represents the Wred yellow packet drop probability. |
| 1.3.6.1.4.1.2544.1.12.4.1.13 | TablecmEthernetAccPortCpdV2Table | not-accessible | current | A list of entries corresponding to Ethernet Access Port Control Protocol Disposition (CPD) V2. This support of CPD is provided on the GE206/GE201 device. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1 | RowcmEthernetAccPortCpdV2Entry | not-accessible | current | A conceptual row in the cmEthernetAccPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Access Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.1 | ColumncmEthernetAccPortCpdV2Index | read-only | current | Unique Index value to access the CPD row. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.2 | ColumncmEthernetAccPortCpdV2CiscoGroupDispType | read-write | deprecated | Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, U… |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.3 | ColumncmEthernetAccPortCpdV2IslDispType | read-write | current | Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.4 | ColumncmEthernetAccPortCpdV2PagpDispType | read-write | current | Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.5 | ColumncmEthernetAccPortCpdV2UdldDispType | read-write | current | Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.6 | ColumncmEthernetAccPortCpdV2CdpDispType | read-write | current | Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.7 | ColumncmEthernetAccPortCpdV2VtpDispType | read-write | current | Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.8 | ColumncmEthernetAccPortCpdV2DtpDispType | read-write | current | Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.9 | ColumncmEthernetAccPortCpdV2PvstpPlusDispType | read-write | current | Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.10 | ColumncmEthernetAccPortCpdV2UplinkFastDispType | read-write | current | Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.11 | ColumncmEthernetAccPortCpdV2VlanBridgeDispType | read-write | current | Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.12 | ColumncmEthernetAccPortCpdV2L2PTDispType | read-write | current | Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.13 | ColumncmEthernetAccPortCpdV2BridgeGroupDispType | read-write | deprecated | Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Contro… |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.14 | ColumncmEthernetAccPortCpdV2BPDUDispType | read-write | current | Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C… |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.15 | ColumncmEthernetAccPortCpdV2PauseDispType | read-write | current | Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.16 | ColumncmEthernetAccPortCpdV2LACPDispType | read-write | current | Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.17 | ColumncmEthernetAccPortCpdV2LACPMarkerDispType | read-write | current | Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.18 | ColumncmEthernetAccPortCpdV2EfmOamDispType | read-write | current | Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.19 | ColumncmEthernetAccPortCpdV2SSMDispType | read-write | current | Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.20 | ColumncmEthernetAccPortCpdV2PortAuthenDispType | read-write | current | Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.21 | ColumncmEthernetAccPortCpdV2BridgeReservedDispType | read-write | deprecated | Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0… |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.22 | ColumncmEthernetAccPortCpdV2LANBridgesDispType | read-write | current | Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.23 | ColumncmEthernetAccPortCpdV2GARPGroupDispType | read-write | deprecated | Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to… |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.24 | ColumncmEthernetAccPortCpdV2GMRPDispType | read-write | current | Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.25 | ColumncmEthernetAccPortCpdV2GVRPDispType | read-write | current | Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21). |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.26 | ColumncmEthernetAccPortCpdV2GARPDispType | read-write | current | Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.27 | ColumncmEthernetAccPortCpdV2LLDPDispType | read-write | deprecated | Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:… |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.28 | ColumncmEthernetAccPortCpdV2ELMIDispType | read-write | current | ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.29 | ColumncmEthernetAccPortCpdV2L2PTTunnelMac | read-write | current | Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC a… |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.30 | ColumncmEthernetAccPortCpdV2Mac00DispType | read-write | current | MAC Address 01:80:C2:00:00:00 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.31 | ColumncmEthernetAccPortCpdV2Mac01DispType | read-write | current | MAC Address 01:80:C2:00:00:01 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.32 | ColumncmEthernetAccPortCpdV2Mac02DispType | read-write | current | MAC Address 01:80:C2:00:00:02 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.33 | ColumncmEthernetAccPortCpdV2Mac03DispType | read-write | current | MAC Address 01:80:C2:00:00:03 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.34 | ColumncmEthernetAccPortCpdV2Mac04DispType | read-write | current | MAC Address 01:80:C2:00:00:04 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.35 | ColumncmEthernetAccPortCpdV2Mac05DispType | read-write | current | MAC Address 01:80:C2:00:00:05 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.36 | ColumncmEthernetAccPortCpdV2Mac06DispType | read-write | current | MAC Address 01:80:C2:00:00:06 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.37 | ColumncmEthernetAccPortCpdV2Mac07DispType | read-write | current | MAC Address 01:80:C2:00:00:07 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.38 | ColumncmEthernetAccPortCpdV2Mac08DispType | read-write | current | MAC Address 01:80:C2:00:00:08 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.39 | ColumncmEthernetAccPortCpdV2Mac09DispType | read-write | current | MAC Address 01:80:C2:00:00:09 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.40 | ColumncmEthernetAccPortCpdV2Mac0ADispType | read-write | current | MAC Address 01:80:C2:00:00:0A Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.41 | ColumncmEthernetAccPortCpdV2Mac0BDispType | read-write | current | MAC Address 01:80:C2:00:00:0B Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.42 | ColumncmEthernetAccPortCpdV2Mac0CDispType | read-write | current | MAC Address 01:80:C2:00:00:0C Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.43 | ColumncmEthernetAccPortCpdV2Mac0DDispType | read-write | current | MAC Address 01:80:C2:00:00:0D Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.44 | ColumncmEthernetAccPortCpdV2Mac0EDispType | read-write | current | MAC Address 01:80:C2:00:00:0E Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.45 | ColumncmEthernetAccPortCpdV2Mac0FDispType | read-write | current | MAC Address 01:80:C2:00:00:0F Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.46 | ColumncmEthernetAccPortCpdV2NearestLLDPDispType | read-write | current | LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.47 | ColumncmEthernetAccPortCpdV2NonTpmrLLDPDispType | read-write | current | LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.48 | ColumncmEthernetAccPortCpdV2CustomerLLDPDispType | read-write | current | LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.49 | ColumncmEthernetAccPortCpdV2PtpUntaggedDispType | read-write | current | PTP untagged frame Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.13.1.50 | ColumncmEthernetAccPortCpdV2PtpTaggedDispType | read-write | current | PTP tagged frame Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14 | TablecmFlowCpdV2Table | not-accessible | current | A list of entries corresponding to Ethernet Flow Control Protocol Disposition V2. This table is supported for the GE206/GE201 devices. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1 | RowcmFlowCpdV2Entry | not-accessible | current | A conceptual row in the cmFlowCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.1 | ColumncmFlowCpdV2Index | read-only | current | Unique Index value to access the CPD row. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.2 | ColumncmFlowCpdV2CiscoGroupDispType | read-write | deprecated | Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, U… |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.3 | ColumncmFlowCpdV2IslDispType | read-write | current | Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.4 | ColumncmFlowCpdV2PagpDispType | read-write | current | Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.5 | ColumncmFlowCpdV2UdldDispType | read-write | current | Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.6 | ColumncmFlowCpdV2CdpDispType | read-write | current | Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.7 | ColumncmFlowCpdV2VtpDispType | read-write | current | Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.8 | ColumncmFlowCpdV2DtpDispType | read-write | current | Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.9 | ColumncmFlowCpdV2PvstpPlusDispType | read-write | current | Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.10 | ColumncmFlowCpdV2UplinkFastDispType | read-write | current | Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.11 | ColumncmFlowCpdV2VlanBridgeDispType | read-write | current | Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.12 | ColumncmFlowCpdV2L2PTDispType | read-write | current | Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.13 | ColumncmFlowCpdV2BridgeGroupDispType | read-write | deprecated | Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Contro… |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.14 | ColumncmFlowCpdV2BPDUDispType | read-write | current | Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C… |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.15 | ColumncmFlowCpdV2PauseDispType | read-write | current | Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.16 | ColumncmFlowCpdV2LACPDispType | read-write | current | Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.17 | ColumncmFlowCpdV2LACPMarkerDispType | read-write | current | Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.18 | ColumncmFlowCpdV2EfmOamDispType | read-write | current | Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.19 | ColumncmFlowCpdV2SSMDispType | read-write | current | Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.20 | ColumncmFlowCpdV2PortAuthenDispType | read-write | current | Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.21 | ColumncmFlowCpdV2BridgeReservedDispType | read-write | deprecated | Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0… |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.22 | ColumncmFlowCpdV2LANBridgesDispType | read-write | current | Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.23 | ColumncmFlowCpdV2GARPGroupDispType | read-write | deprecated | Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to… |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.24 | ColumncmFlowCpdV2GMRPDispType | read-write | current | Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.25 | ColumncmFlowCpdV2GVRPDispType | read-write | current | Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21). |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.26 | ColumncmFlowCpdV2GARPDispType | read-write | current | Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.27 | ColumncmFlowCpdV2ActiveControlProtocols | read-only | current | List of Active Control Protocol Dispositions. Note that if the Port Level Disposition control is set to PEER or DISCARD, the flow level disposition is no longe… |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.28 | ColumncmFlowCpdV2LLDPDispType | read-write | deprecated | Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:… |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.29 | ColumncmFlowCpdV2ELMIDispType | read-write | current | ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.30 | ColumncmFlowCpdV2Mac00DispType | read-write | current | MAC Address 01:80:C2:00:00:00 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.31 | ColumncmFlowCpdV2Mac01DispType | read-write | current | MAC Address 01:80:C2:00:00:01 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.32 | ColumncmFlowCpdV2Mac02DispType | read-write | current | MAC Address 01:80:C2:00:00:02 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.33 | ColumncmFlowCpdV2Mac03DispType | read-write | current | MAC Address 01:80:C2:00:00:03 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.34 | ColumncmFlowCpdV2Mac04DispType | read-write | current | MAC Address 01:80:C2:00:00:04 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.35 | ColumncmFlowCpdV2Mac05DispType | read-write | current | MAC Address 01:80:C2:00:00:05 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.36 | ColumncmFlowCpdV2Mac06DispType | read-write | current | MAC Address 01:80:C2:00:00:06 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.37 | ColumncmFlowCpdV2Mac07DispType | read-write | current | MAC Address 01:80:C2:00:00:07 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.38 | ColumncmFlowCpdV2Mac08DispType | read-write | current | MAC Address 01:80:C2:00:00:08 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.39 | ColumncmFlowCpdV2Mac09DispType | read-write | current | MAC Address 01:80:C2:00:00:09 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.40 | ColumncmFlowCpdV2Mac0ADispType | read-write | current | MAC Address 01:80:C2:00:00:0A Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.41 | ColumncmFlowCpdV2Mac0BDispType | read-write | current | MAC Address 01:80:C2:00:00:0B Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.42 | ColumncmFlowCpdV2Mac0CDispType | read-write | current | MAC Address 01:80:C2:00:00:0C Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.43 | ColumncmFlowCpdV2Mac0DDispType | read-write | current | MAC Address 01:80:C2:00:00:0D Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.44 | ColumncmFlowCpdV2Mac0EDispType | read-write | current | MAC Address 01:80:C2:00:00:0E Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.45 | ColumncmFlowCpdV2Mac0FDispType | read-write | current | MAC Address 01:80:C2:00:00:0F Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.46 | ColumncmFlowCpdV2NearestLLDPDispType | read-write | current | LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.47 | ColumncmFlowCpdV2NonTpmrLLDPDispType | read-write | current | LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.14.1.48 | ColumncmFlowCpdV2CustomerLLDPDispType | read-write | current | LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15 | TablecmEthernetNetPortCpdV2Table | not-accessible | current | A list of entries corresponding to Ethernet Network Port Control Protocol Disposition V2. This table is supported for the GE206/GE201 devices. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1 | RowcmEthernetNetPortCpdV2Entry | not-accessible | current | A conceptual row in the cmEthernetNetPortCpdV2Table. These entries represent a Control Protocol Disposition filtering criteria on the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.1 | ColumncmEthernetNetPortCpdV2Index | read-only | current | Unique Index value to access the CPD row. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.2 | ColumncmEthernetNetPortCpdV2CiscoGroupDispType | read-write | deprecated | Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, U… |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.3 | ColumncmEthernetNetPortCpdV2IslDispType | read-write | current | Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.4 | ColumncmEthernetNetPortCpdV2PagpDispType | read-write | current | Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.5 | ColumncmEthernetNetPortCpdV2UdldDispType | read-write | current | Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.6 | ColumncmEthernetNetPortCpdV2CdpDispType | read-write | current | Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.7 | ColumncmEthernetNetPortCpdV2VtpDispType | read-write | current | Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.8 | ColumncmEthernetNetPortCpdV2DtpDispType | read-write | current | Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.9 | ColumncmEthernetNetPortCpdV2PvstpPlusDispType | read-write | current | Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.10 | ColumncmEthernetNetPortCpdV2UplinkFastDispType | read-write | current | Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.11 | ColumncmEthernetNetPortCpdV2VlanBridgeDispType | read-write | current | Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.12 | ColumncmEthernetNetPortCpdV2L2PTDispType | read-write | current | Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.13 | ColumncmEthernetNetPortCpdV2BridgeGroupDispType | read-write | deprecated | Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Contro… |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.14 | ColumncmEthernetNetPortCpdV2BPDUDispType | read-write | current | Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C… |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.15 | ColumncmEthernetNetPortCpdV2PauseDispType | read-write | current | Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.16 | ColumncmEthernetNetPortCpdV2LACPDispType | read-write | current | Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.17 | ColumncmEthernetNetPortCpdV2LACPMarkerDispType | read-write | current | Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.18 | ColumncmEthernetNetPortCpdV2EfmOamDispType | read-write | current | Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.19 | ColumncmEthernetNetPortCpdV2SSMDispType | read-write | current | Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.20 | ColumncmEthernetNetPortCpdV2PortAuthenDispType | read-write | current | Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.21 | ColumncmEthernetNetPortCpdV2BridgeReservedDispType | read-write | deprecated | Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0… |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.22 | ColumncmEthernetNetPortCpdV2LANBridgesDispType | read-write | current | Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.23 | ColumncmEthernetNetPortCpdV2GARPGroupDispType | read-write | deprecated | Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to… |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.24 | ColumncmEthernetNetPortCpdV2GMRPDispType | read-write | current | Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.25 | ColumncmEthernetNetPortCpdV2GVRPDispType | read-write | current | Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:21). |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.26 | ColumncmEthernetNetPortCpdV2GARPDispType | read-write | current | Group Disposition type which includes GARP Reserved MAC Address from range 01:80:C2:00:00:22 to 01:80:C2:00:00:2F. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.27 | ColumncmEthernetNetPortCpdV2LLDPDispType | read-write | deprecated | Deprecated - each LLDP MAC protocol has its own disposition. LLDP (Link Layer Discovery Protocol) Disposition type. MAC Address 01:80:C2:00:00:0e, 01:80:C2:00:… |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.28 | ColumncmEthernetNetPortCpdV2ELMIDispType | read-write | current | ELMI (Ethernet Local Management Interface) Disposition type. MAC Address 01:80:C2:00:00:07 and EtherType of 0x88EE. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.29 | ColumncmEthernetNetPortCpdV2L2PTTunnelMac | read-write | current | Configurable Layer 2 Protocol Tunneling MAC Address. For protocols STP, CDP and VTP, with control protocol disposition as pass-thru-l2pt, this configured MAC a… |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.30 | ColumncmEthernetNetPortCpdV2Mac00DispType | read-write | current | MAC Address 01:80:C2:00:00:00 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.31 | ColumncmEthernetNetPortCpdV2Mac01DispType | read-write | current | MAC Address 01:80:C2:00:00:01 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.32 | ColumncmEthernetNetPortCpdV2Mac02DispType | read-write | current | MAC Address 01:80:C2:00:00:02 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.33 | ColumncmEthernetNetPortCpdV2Mac03DispType | read-write | current | MAC Address 01:80:C2:00:00:03 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.34 | ColumncmEthernetNetPortCpdV2Mac04DispType | read-write | current | MAC Address 01:80:C2:00:00:04 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.35 | ColumncmEthernetNetPortCpdV2Mac05DispType | read-write | current | MAC Address 01:80:C2:00:00:05 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.36 | ColumncmEthernetNetPortCpdV2Mac06DispType | read-write | current | MAC Address 01:80:C2:00:00:06 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.37 | ColumncmEthernetNetPortCpdV2Mac07DispType | read-write | current | MAC Address 01:80:C2:00:00:07 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.38 | ColumncmEthernetNetPortCpdV2Mac08DispType | read-write | current | MAC Address 01:80:C2:00:00:08 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.39 | ColumncmEthernetNetPortCpdV2Mac09DispType | read-write | current | MAC Address 01:80:C2:00:00:09 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.40 | ColumncmEthernetNetPortCpdV2Mac0ADispType | read-write | current | MAC Address 01:80:C2:00:00:0A Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.41 | ColumncmEthernetNetPortCpdV2Mac0BDispType | read-write | current | MAC Address 01:80:C2:00:00:0B Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.42 | ColumncmEthernetNetPortCpdV2Mac0CDispType | read-write | current | MAC Address 01:80:C2:00:00:0C Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.43 | ColumncmEthernetNetPortCpdV2Mac0DDispType | read-write | current | MAC Address 01:80:C2:00:00:0D Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.44 | ColumncmEthernetNetPortCpdV2Mac0EDispType | read-write | current | MAC Address 01:80:C2:00:00:0E Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.45 | ColumncmEthernetNetPortCpdV2Mac0FDispType | read-write | current | MAC Address 01:80:C2:00:00:0F Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.46 | ColumncmEthernetNetPortCpdV2NearestLLDPDispType | read-write | current | LLDP (Link Layer Discovery Protocol) Nearest Bridge Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.47 | ColumncmEthernetNetPortCpdV2NonTpmrLLDPDispType | read-write | current | LLDP (Link Layer Discovery Protocol) Non-TPMR Bridge Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.48 | ColumncmEthernetNetPortCpdV2CustomerLLDPDispType | read-write | current | LLDP (Link Layer Discovery Protocol) Customer Bridge Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.49 | ColumncmEthernetNetPortCpdV2PtpUntaggedDispType | read-write | current | PTP non forwarding untagged frame Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.15.1.50 | ColumncmEthernetNetPortCpdV2PtpTaggedDispType | read-write | current | PTP tagged frame Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.16 | TablebitsPortTable | not-accessible | current | A list of entries corresponding to BITS Port Facilities for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1 | RowbitsPortEntry | not-accessible | current | A conceptual row in the bitsPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.1 | ColumnbitsPortTypeIndex | read-only | current | An integer index value used to uniquely identify this BITS Port within the card. Value 1 stands for BITS-IN, 2 for BITS-OUT. |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.2 | ColumnbitsPortIndex | read-only | current | An integer index value used to uniquely identify this BITS Port within the card. Note that each BITs Port is uniquely identified by the indices neIndex, shelfI… |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.3 | ColumnbitsPortIfIndex | read-only | current | This object has the same value as ifIndex for Bits Port. An integer index value used to uniquely identify this Bits Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.4 | ColumnbitsPortEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.5 | ColumnbitsPortAdminState | read-write | current | This object represents the Administrative State of the BITS Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.6 | ColumnbitsPortOperationalState | read-only | current | This object represents the Operational State of the BITS Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.7 | ColumnbitsPortSecondaryState | read-only | current | This object represents the Secondary State of the BITS Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.8 | ColumnbitsPortType | read-only | current | This object represents the BITS Port Type. |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.9 | ColumnbitsPortLineType | read-write | current | This object represents the BITS Port Line Type. Determines whether the T1/E1 BITS port operates in T1, E1, or 2048kHz mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.10 | ColumnbitsPortLineCode | read-write | current | This object represents the BITS Port Line Code. When the port is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default valu… |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.11 | ColumnbitsPortFrameFormat | read-write | current | This object represents the BITS Port Frame Format. When the port is configured for a Line Type of T1, the valid values are t1-sf and t1-esf and the default val… |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.12 | ColumnbitsPortSaBitDesignation | read-write | current | This object represents the BITS Port Sa Bit Designation. Determines which E1 Sa Bit is used to transmit/receive the SSM. For T1 and 2048khz Line Types, the onl… |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.13 | ColumnbitsPortQLModeEnabled | read-write | current | This object allows to specify whether the BITS Port can be enabled/disabled for QL Mode. When enabled, on receive side -port shall PEER the SSM (Sync Status Me… |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.14 | ColumnbitsPortExpectedQL | read-write | current | This object allows to specify the expected QL when the BITS Port is enabled for QL Mode. This object allows the user to set a minimum expected received Quality… |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.15 | ColumnbitsPortAssumedQL | read-write | current | This object allows to specify the assumed QL on the BITS Port. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 a… |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.16 | ColumnbitsPortReceivedQL | read-only | current | This object provides the Received QL value for the BITS port. If the BITS port's QL Mode is disabled, then the received QL value is not applicable. |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.17 | ColumnbitsPortTransmitQL | read-only | current | This object provides the Transmitted QL value for the BITS port. If the BITS port's QL Mode is disabled, then the received QL value is not applicable. |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.18 | ColumnbitsPortSquelchQL | read-write | current | This object allows to set the Squelch QL for the BITS-OUT port. The Squelch QL is only meaningful if the QL Mode is Enabled. The Squelch QL is used to determin… |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.19 | ColumnbitsPortLineBuildOut | read-write | current | This object allows to manage the line build out on the BITS-OUT port when the Line Type is T1. |
| 1.3.6.1.4.1.2544.1.12.4.1.16.1.20 | ColumnbitsPortImpedance | read-only | current | This object provides the impedance mode for the BITS-OUT port. |
| 1.3.6.1.4.1.2544.1.12.4.1.17 | Tableieee1588EthernetPortTable | not-accessible | current | A list of entries corresponding to IEEE Ethernet Port Facilities for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.17.1 | Rowieee1588EthernetPortEntry | not-accessible | current | A conceptual row in the IEEE Ethernet Port Table. |
| 1.3.6.1.4.1.2544.1.12.4.1.17.1.1 | Columnieee1588EthernetPortIndex | read-only | current | An integer index value used to uniquely identify the IEEE Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.17.1.2 | Columnieee1588EthernetPortIfIndex | read-only | current | This object has the same value as ifIndex for the IEEE Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.17.1.3 | Columnieee1588EthernetPortEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.17.1.4 | Columnieee1588EthernetPortAdminState | read-write | current | This object represents the Administrative State of the Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.17.1.5 | Columnieee1588EthernetPortOperationalState | read-only | current | This object represents the Operational State of the Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.17.1.6 | Columnieee1588EthernetPortSecondaryState | read-only | current | This object represents the Secondary State of the Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.17.1.7 | Columnieee1588EthernetPortMTU | read-write | current | This object provides the MTU on the Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.17.1.8 | Columnieee1588EthernetPortMediaType | read-write | current | This object represents the type of Media. |
| 1.3.6.1.4.1.2544.1.12.4.1.17.1.9 | Columnieee1588EthernetPortConfigSpeed | read-write | current | This object allows to configure the speed of the Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.17.1.10 | Columnieee1588EthernetPortNegotiatedSpeed | read-only | current | This object provides the negotiated speed of the Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.17.1.11 | Columnieee1588EthernetPortMDIXType | read-write | current | This object allows management of MDIX property on Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.18 | Tablegps10MHzPortTable | not-accessible | current | A list of entries corresponding to GPS 10MHz Facilities for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1 | Rowgps10MHzPortEntry | not-accessible | current | A conceptual row in the GPS 10MHz Port Table. |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.1 | Columngps10MHzPortIndex | read-only | current | An integer index value used to uniquely identify the IEEE Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.2 | Columngps10MHzPortIfIndex | read-only | current | This object has the same value as ifIndex for the IEEE Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.3 | Columngps10MHzPortEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.4 | Columngps10MHzPortAdminState | read-write | current | This object represents the Administrative State of the Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.5 | Columngps10MHzPortOperationalState | read-only | current | This object represents the Operational State of the Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.6 | Columngps10MHzPortSecondaryState | read-only | current | This object represents the Secondary State of the Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.7 | Columngps10MHzPortSignalDirection | read-write | current | This object allows specification of the signal type (i.e. input or output). |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.8 | Columngps10MHzPortSquelchControl | read-write | current | This object allows to set the Squelch Control for the 10MHz port. The Squelch Control is used to determine the type of squelch control used to squelch the outp… |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.9 | Columngps10MHzPortSquelchQL | read-write | current | This object allows to set the Squelch QL for the 10MHz port. This value is used when f310MHzClockPortSquelchControl is squelch-ql. The Squelch QL is used to de… |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.10 | Columngps10MHzPortFrequencySource | read-write | current | This object allows to set the Frequency Source for the Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.11 | Columngps10MHzPortClockClass | read-only | deprecated | This object specify GPS port clock class. |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.12 | Columngps10MHzPortClockAccuracy | read-only | deprecated | This object specify GPS port clock accuracy. |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.13 | Columngps10MHzPortTimeSource | read-only | deprecated | This object specify GPS port time source. |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.14 | Columngps10MHzPortAssumedQL | read-write | current | This object allows to specify the assumed QL on the GPS Port. The Assumed QL is only meaningful if the Network Clock Type (see fsp150cm-sync.mib) is option1 an… |
| 1.3.6.1.4.1.2544.1.12.4.1.18.1.15 | Columngps10MHzPortAlias | read-write | current | This object allows SNMP management entities to provide an alias to the gps 10MHz Port entity. |
| 1.3.6.1.4.1.2544.1.12.4.1.19 | TablecmEthernetNetPortClbTable | not-accessible | current | A list of entries corresponding to Ethernet Network Port Cable Length Benchmark. |
| 1.3.6.1.4.1.2544.1.12.4.1.19.1 | RowcmEthernetNetPortClbEntry | not-accessible | current | A conceptual row in the cmEthernetNetPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Network Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.19.1.1 | ColumncmEthernetNetPortClbIndex | read-only | current | An integer index value used to uniquely identify this Cable Length Benchmark Entry specification. |
| 1.3.6.1.4.1.2544.1.12.4.1.19.1.2 | ColumncmEthernetNetPortClbEnabled | read-write | current | This enables specification of Cable Length Benchmark entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.19.1.3 | ColumncmEthernetNetPortClbLength | read-write | current | Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the … |
| 1.3.6.1.4.1.2544.1.12.4.1.19.1.4 | ColumncmEthernetNetPortClbDescr | read-write | current | A textual string containing description of cable span. |
| 1.3.6.1.4.1.2544.1.12.4.1.20 | TablecmNetPortPrioMapTable | not-accessible | current | A list of entries corresponding to Ethernet Network Port Priority Mappings in multi Class of Service (COS) mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.20.1 | RowcmNetPortPrioMapEntry | not-accessible | current | A conceptual row in the cmNetPortPrioMapTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.20.1.1 | ColumncmNetPortPrioMapIndex | read-only | current | The integer index value corresponding to a priority value. |
| 1.3.6.1.4.1.2544.1.12.4.1.20.1.2 | ColumncmNetPortPrioMapInPriority | read-write | current | The integer index value corresponding to a priority value. |
| 1.3.6.1.4.1.2544.1.12.4.1.20.1.3 | ColumncmNetPortPrioMapCOS | read-write | current | This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.20.1.4 | ColumncmNetPortPrioMapOuterTagPriority | read-write | current | This allows specification of the VLAN priority that will replace the outgoing (N2A direction) outer-tag's priority. Note that, each flow participates or not in… |
| 1.3.6.1.4.1.2544.1.12.4.1.21 | TablecmAccPortPcpDEEncTable | not-accessible | current | Ethernet Access Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the Access port. |
| 1.3.6.1.4.1.2544.1.12.4.1.21.1 | RowcmAccPortPcpDEEncEntry | not-accessible | current | A conceptual row in the ethernetPBPcpDEEncPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.21.1.1 | ColumncmAccPortPcpDEEncIndex | read-only | current | An integer index value used to uniquely identify a row in the PCP drop eligible encoding table. |
| 1.3.6.1.4.1.2544.1.12.4.1.21.1.2 | ColumncmAccPortPcpDEEncInPriority | read-write | current | This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority. |
| 1.3.6.1.4.1.2544.1.12.4.1.21.1.3 | ColumncmAccPortPcpDEEncDropIneligiblePrio | read-write | current | This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it. |
| 1.3.6.1.4.1.2544.1.12.4.1.21.1.4 | ColumncmAccPortPcpDEEncDropEligiblePrio | read-write | current | This object is the PCP value that has a priority value with implicit drop eligibility encoded into it. |
| 1.3.6.1.4.1.2544.1.12.4.1.22 | TablecmAccPortPcpDEDecTable | not-accessible | current | Ethernet Access Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port. |
| 1.3.6.1.4.1.2544.1.12.4.1.22.1 | RowcmAccPortPcpDEDecEntry | not-accessible | current | A conceptual row in the ethernetPBPcpDEDecPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.22.1.1 | ColumncmAccPortPcpDEDecIndex | read-only | current | An integer index value used to uniquely identify a row in the PCP drop eligible decoding table. |
| 1.3.6.1.4.1.2544.1.12.4.1.22.1.2 | ColumncmAccPortPcpDEDecInPriority | read-write | current | This object is the input priority that is decoded to get priority and the drop eligibility of a frame. |
| 1.3.6.1.4.1.2544.1.12.4.1.22.1.3 | ColumncmAccPortPcpDEDecOutPriority | read-write | current | This object is the priority value decoded from a incoming PCP value. |
| 1.3.6.1.4.1.2544.1.12.4.1.22.1.4 | ColumncmAccPortPcpDEDecDropEligible | read-write | current | This object is the drop eligibility decoded from a incoming PCP value. |
| 1.3.6.1.4.1.2544.1.12.4.1.23 | TablecmAccPortPcpDEPairTable | not-accessible | current | Ethernet Access Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending… |
| 1.3.6.1.4.1.2544.1.12.4.1.23.1 | RowcmAccPortPcpDEPairEntry | not-accessible | current | A conceptual row in the cmAccPortPcpDEPairEntry. |
| 1.3.6.1.4.1.2544.1.12.4.1.23.1.1 | ColumncmAccPortPcpDEPairIndex | read-only | current | An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table. |
| 1.3.6.1.4.1.2544.1.12.4.1.23.1.2 | ColumncmAccPortPcpDEDropIneligiblePrio | read-write | current | This object is the drop ineligible priority. |
| 1.3.6.1.4.1.2544.1.12.4.1.23.1.3 | ColumncmAccPortPcpDEDropEligiblePrio | read-write | current | This object is the drop eligible priority. |
| 1.3.6.1.4.1.2544.1.12.4.1.24 | TablecmNetPortPcpDEEncTable | not-accessible | current | Ethernet Network Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the Network port. |
| 1.3.6.1.4.1.2544.1.12.4.1.24.1 | RowcmNetPortPcpDEEncEntry | not-accessible | current | A conceptual row in the ethernetPBPcpDEEncPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.24.1.1 | ColumncmNetPortPcpDEEncIndex | read-only | current | An integer index value used to uniquely identify a row in the PCP drop eligible encoding table. |
| 1.3.6.1.4.1.2544.1.12.4.1.24.1.2 | ColumncmNetPortPcpDEEncInPriority | read-write | current | This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority. |
| 1.3.6.1.4.1.2544.1.12.4.1.24.1.3 | ColumncmNetPortPcpDEEncDropIneligiblePrio | read-write | current | This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it. |
| 1.3.6.1.4.1.2544.1.12.4.1.24.1.4 | ColumncmNetPortPcpDEEncDropEligiblePrio | read-write | current | This object is the PCP value that has a priority value with implicit drop eligibility encoded into it. |
| 1.3.6.1.4.1.2544.1.12.4.1.25 | TablecmNetPortPcpDEDecTable | not-accessible | current | Ethernet Network Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port. |
| 1.3.6.1.4.1.2544.1.12.4.1.25.1 | RowcmNetPortPcpDEDecEntry | not-accessible | current | A conceptual row in the ethernetPBPcpDEDecPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.25.1.1 | ColumncmNetPortPcpDEDecIndex | read-only | current | An integer index value used to uniquely identify a row in the PCP drop eligible decoding table. |
| 1.3.6.1.4.1.2544.1.12.4.1.25.1.2 | ColumncmNetPortPcpDEDecInPriority | read-write | current | This object is the input priority that is decoded to get priority and the drop eligibility of a frame. |
| 1.3.6.1.4.1.2544.1.12.4.1.25.1.3 | ColumncmNetPortPcpDEDecOutPriority | read-write | current | This object is the priority value decoded from a incoming PCP value. |
| 1.3.6.1.4.1.2544.1.12.4.1.25.1.4 | ColumncmNetPortPcpDEDecDropEligible | read-write | current | This object is the drop eligibility decoded from a incoming PCP value. |
| 1.3.6.1.4.1.2544.1.12.4.1.26 | TablecmNetPortPcpDEPairTable | not-accessible | current | Ethernet Network Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Dependin… |
| 1.3.6.1.4.1.2544.1.12.4.1.26.1 | RowcmNetPortPcpDEPairEntry | not-accessible | current | A conceptual row in the cmNetPortPcpDEPairEntry. |
| 1.3.6.1.4.1.2544.1.12.4.1.26.1.1 | ColumncmNetPortPcpDEPairIndex | read-only | current | An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table. |
| 1.3.6.1.4.1.2544.1.12.4.1.26.1.2 | ColumncmNetPortPcpDEDropIneligiblePrio | read-write | current | This object is the drop ineligible priority. |
| 1.3.6.1.4.1.2544.1.12.4.1.26.1.3 | ColumncmNetPortPcpDEDropEligiblePrio | read-write | current | This object is the drop eligible priority. |
| 1.3.6.1.4.1.2544.1.12.4.1.27 | TablecmEthernetTrafficPortTable | not-accessible | current | A list of entries corresponding to Ethernet Facilities for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1 | RowcmEthernetTrafficPortEntry | not-accessible | current | A conceptual row in the cmEthernetTrafficPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.1 | ColumncmEthernetTrafficPortIndex | read-only | current | An integer index value used to uniquely identify this Ethernet Port within a card. Note that each Ethernet Port is uniquely identified by the indices neIndex, … |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.2 | ColumncmEthernetTrafficPortIfIndex | read-only | current | This object has the same value as ifIndex for Ethernet Port. An integer index value used to uniquely identify this Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.3 | ColumncmEthernetTrafficPortEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.4 | ColumncmEthernetTrafficPortAdminState | read-write | current | This object represents the Administrative State of the Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.5 | ColumncmEthernetTrafficPortOperationalState | read-only | current | This object represents the Operational State of the Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.6 | ColumncmEthernetTrafficPortSecondaryState | read-only | current | This object represents the Secondary State of the Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.7 | ColumncmEthernetTrafficPortMTU | read-write | current | This object provides the MTU on the Ethernet Port. The object is made read-write for FSP150CC devices. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.8 | ColumncmEthernetTrafficPortMediaType | read-write | current | This object represents the type of Ethernet Media on the Ethernet Port. The media type includes, copper (1) fiber (2) coppersfp (3) CM Aggregation Product does… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.9 | ColumncmEthernetTrafficPortConfigSpeed | read-write | current | This object allows to configure the speed of the Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.10 | ColumncmEthernetTrafficPortNegotiatedSpeed | read-only | current | This object provides the negotiated speed of the Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.11 | ColumncmEthernetTrafficPortMDIXType | read-write | current | This object allows management of MDIX property on Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.12 | ColumncmEthernetTrafficPortMDIXStatus | read-only | current | This object provides the current MDIX status of the Ethernet port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.13 | ColumncmEthernetTrafficPortSfpVendorName | read-only | current | This object provides the vendor name of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.14 | ColumncmEthernetTrafficPortSfpPartNumber | read-only | current | This object provides the part number of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.15 | ColumncmEthernetTrafficPortSfpSerialNumber | read-only | current | This object provides the serial number of the SFP. This is shown only when cmEthernetTrafficPortMediaType is fiber. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.16 | ColumncmEthernetTrafficPortSfpDateOfManufacture | read-only | current | This object provides the date of manufacture of the SFP. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.17 | ColumncmEthernetTrafficPortSfpConnectorValue | read-only | current | This object provides the SFP connector value. This is applicable when cmEthernetTrafficPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.18 | ColumncmEthernetTrafficPortSfpLinkLength | read-only | current | This object provides the SFP Link Length. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.19 | ColumncmEthernetTrafficPortSfpLaserWaveLength | read-only | current | This object provides the SFP Laser Wave Length in nano meters. This is applicable only when cmEthernetTrafficPortMediaType is fiber. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.20 | ColumncmEthernetTrafficPortSfpMediaType | read-only | current | This object provides the SFP Media Type. This is applicable only when cmEthernetTrafficPortMediaType is fiber or coppersfp. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.21 | ColumncmEthernetTrafficPortLoopbackConfig | read-write | current | This object allows to initiate loopbacks on on the Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.22 | ColumncmEthernetTrafficPortLoopbackStatus | read-only | current | This object provides status of the current loopback on the Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.23 | ColumncmEthernetTrafficPortLoopbackTime | read-write | current | This object allows to specify time for timed-loopbacks on on the Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.24 | ColumncmEthernetTrafficPortLoopbackSwapSADA | read-write | current | This object allows to specify whether or not the loopbacked frame will have the Source Address and Destination Address swapped. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.25 | ColumncmEthernetTrafficPortOuterVlanLoopbackMask | read-write | current | This object allows specification of the outer VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be speci… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.26 | ColumncmEthernetTrafficPortOuterVlanLoopback1 | read-write | current | This object allows specification of the outer VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.27 | ColumncmEthernetTrafficPortOuterVlanLoopback2 | read-write | current | This object allows specification of the outer VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.28 | ColumncmEthernetTrafficPortOuterVlanLoopback3 | read-write | current | This object allows specification of the outer VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.29 | ColumncmEthernetTrafficPortLinkLossFwdEnabled | read-write | current | This object allows enabling/disabling link loss forwarding on the Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.30 | ColumncmEthernetTrafficPortLinkLossFwdSignalType | read-write | current | This object allows definition of the link loss forwarding signalling type. This is applicable only if cmEthernetTrafficPortLinkLossFwdEnabled is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.31 | ColumncmEthernetTrafficPortLinkLossFwdTriggerTypes | read-write | current | This object allows definition of the link loss forwarding trigger types. This is applicable only if cmEthernetTrafficPortLinkLossFwdEnabled is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.32 | ColumncmEthernetTrafficPortLinkLossFwdDelay | read-write | current | This object allows specification of the delay between detection of link loss and signalling of link loss forwarding. Time specified is in seconds. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.33 | ColumncmEthernetTrafficPortLinkLossFwdActive | read-only | current | This object provides the link loss forwarding status indicating if link loss forwarding is currently being signaled via the port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.34 | ColumncmEthernetTrafficPortLinkLossFwdPartnerEnabled | read-only | current | This object provides the indication of a link partners ability to support link loss forwarding via EFM, i.e. from received organization specific OAMPDUs. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.35 | ColumncmEthernetTrafficPortLinkLossFwdLocalLinkId | read-write | current | This object allows configuration of the Local Link Id on Ethernet port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.36 | ColumncmEthernetTrafficPortLinkLossFwdRemoteLinkIds | read-write | current | This object allows enabling/disabling Remote Link Ids on Ethernet port. the Ethernet port is able to distinguish the remote side client ports from the Remote L… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.37 | ColumncmEthernetTrafficPortLinkLossFwdTxActionType | read-write | current | This object allows to specify the Ethernet Port's behavior when link loss forwarding trigger events occur on the Port. This provides ability to configure per E… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.38 | ColumncmEthernetTrafficPortLinkLossFwdRxRLDLinkIds | read-only | current | This object provides the received Remote Link IDs in EFM RLD messages on the Ethernet Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.39 | ColumncmEthernetTrafficPortOamId | read-only | current | OAM Id. This is unique EFM OAM sublayer port id. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.40 | ColumncmEthernetTrafficPortOamDiscoveryState | read-only | current | Ethernet Port's OAM discovery state. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.41 | ColumncmEthernetTrafficPortOamLocalVarRtrvsEnabled | read-only | current | This object allows specification of whether the Ethernet Port supports sending variable response OAMPDUs. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.42 | ColumncmEthernetTrafficPortOamLocalLinkEventsEnabled | read-only | current | This object allows specification of whether the Ethernet Port supports interpreting Link Events. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.43 | ColumncmEthernetTrafficPortOamLocalOamLoopbacksSupported | read-write | current | This object allows specification of whether the Ethernet Port is capable of OAM remote loopback mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.44 | ColumncmEthernetTrafficPortOamLocalUnidirSupportEnabled | read-only | current | This object allows specification of whether the Ethernet Port is capable of sending OAMPDUs when the receive path is non-operational. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.45 | ColumncmEthernetTrafficPortOamLocalMaxPDUSize | read-only | current | This object represents the largest OAMPDU, in octets, supported by the Ethernet Port. This value is compared to the remote Maximum PDU Size and the smaller of … |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.46 | ColumncmEthernetTrafficPortOamLocalMode | read-write | current | This object allows to configure the OAM sublayer entity in either Active or Passive mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.47 | ColumncmEthernetTrafficPortOamRemoteMacAddress | read-only | current | This object allows retrieval of the Remote Mac Address. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.48 | ColumncmEthernetTrafficPortOamRemoteVarRtrvsEnabled | read-only | current | This object allows retrieval of whether the remote OAM entity supports sending variable response OAMPDUs. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.49 | ColumncmEthernetTrafficPortOamRemoteLinkEventsEnabled | read-only | current | This object allows retrieval of whether the remote OAM entity supports interpreting Link Events. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.50 | ColumncmEthernetTrafficPortOamRemoteOamLoopbacksSupported | read-only | current | This object allows retrieval of whether the remote OAM entity supports OAM remote loopback mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.51 | ColumncmEthernetTrafficPortOamRemoteUnidirSupportEnabled | read-only | current | This object allows retrieval of whether the remote OAM entity is capable of sending OAMPDUs when the receive path is non-operational. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.52 | ColumncmEthernetTrafficPortOamRemoteMaxPDUSize | read-only | current | This object allows retrieval of the remote OAM entity maximum OAMPDU size. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.53 | ColumncmEthernetTrafficPortOamRemoteMode | read-only | current | This object allows to retrieve whether the remote OAM sublayer entity is either in Active or Passive mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.54 | ColumncmEthernetTrafficPortOamEnabled | read-write | current | This object allows to manage the EFM OAM on Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.55 | ColumncmEthernetTrafficPortOamAdminState | read-only | current | This object provides the EFM OAM Admin State. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.56 | ColumncmEthernetTrafficPortSvcType | read-write | current | This object allows specification of whether the Ethernet Port is port based or vlan based. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.57 | ColumncmEthernetTrafficPortRxPauseEnabled | read-write | current | This object defines the RxPause enable or disable of the port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.58 | ColumncmEthernetTrafficPortTxPauseEnabled | read-write | current | This object allows enabling/disabling transmit pause frames on Ethernet port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.59 | ColumncmEthernetTrafficPortAfpType | read-write | current | This object allows specification of the Acceptable Frame Policy on Ethernet port. Users can specify whether the port supports only tagged frames, only untagged… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.60 | ColumncmEthernetTrafficPortShapingEnabled | read-write | current | This object allows to manage the Ethernet Port Shaping. When enabled, values in cmEthernetTrafficPortShapedSpeedLo and cmEthernetTrafficPortShapedSpeedHi are a… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.61 | ColumncmEthernetTrafficPortShapedSpeedLo | read-write | current | This object allows to specify the lower 32 bits of the Ethernet Port Shaped speed. This value is applicable when cmEthernetTrafficPortShapingEnabled is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.62 | ColumncmEthernetTrafficPortShapedSpeedHi | read-write | current | This object allows to specify the higher 32 bits of the Port Shaped speed. This value is applicable when cmEthernetTrafficPortShapingEnabled is enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.63 | ColumncmEthernetTrafficPortQinQEtherType | read-write | current | This object allows to specify the Q-in-Q Ether Type on the Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.64 | ColumncmEthernetTrafficPortTagFrameControl | read-write | current | This object defines if c-tag/s-tag frame is allowed to pass through, available only when AFP is set to Tagged. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.65 | ColumncmEthernetTrafficPortEgressVlanTrunkingEnabled | read-write | current | This object allows to enable or disable the VLAN trunking on Ethernet port. Disabling VLAN trunking removes all VLAN tags before transmitting traffic out of th… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.66 | ColumncmEthernetTrafficPortIngressPushPVIDEnabled | read-write | current | This object allows to specify whether cmEthernetTrafficPortPortVlanId value will be PUSHed on untagged frames or not in the ingress direction. This object is o… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.67 | ColumncmEthernetTrafficPortEgressPopPVIDEnabled | read-write | current | This object allows to specify whether cmEthernetTrafficPortPortVlanId value will be POPed in the egress direction. This object is only applicable for connectio… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.68 | ColumncmEthernetTrafficPortEgressPopPriorityVidEnabled | read-write | current | This object defines the egress PopPriorityVid enable or disable of the port. If it is enabled, the outgoing packets with VID=Priority VLAN ID will be swapped b… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.69 | ColumncmEthernetTrafficPortPortVlanId | read-write | current | This object allows to specify the Ethernet Port VLAN Id to PUSH on untagged frames in the to Network direction. This object is only applicable for connection-o… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.70 | ColumncmEthernetTrafficPortPortVlanPriority | read-write | current | This object allows to specify the Ethernet Port VLAN Priority for the PUSHed VLAN tag (specified by cmEthernetTrafficPortPortVlanId) on untagged frames in the … |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.71 | ColumncmEthernetTrafficPortPriorityVlanId | read-write | current | This object allows to specify the Ethernet Priority VLAN Id to replace the null-tagged or priority tagged frames in the to ingress direction. This object is on… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.72 | ColumncmEthernetTrafficPortIngressPrioMapMode | read-write | current | This object allows to specify the Ethernet Port Priority Mapping Mode used for classification of frames. This object is only applicable for connection-oriented… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.73 | ColumncmEthernetTrafficPortIngressCOSPriority | read-create | current | This object is used to specify whether the EthernetTrafficPort uses the inner-tag or the outer-tag in determining the COS (Class of Service). |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.74 | ColumncmEthernetTrafficPortSyncEEnabled | read-write | current | This object allows to specify whether the Ethernet Port can be enabled/disabled for Synchronous Ethernet. This object is only applicable for Synchronous Ethern… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.75 | ColumncmEthernetTrafficPortQLModeEnabled | read-write | current | This object allows to specify whether the Ethernet Port can be enabled/disabled for QL Mode. This object is only applicable for Synchronous Ethernet capable po… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.76 | ColumncmEthernetTrafficPortExpectedQL | read-write | current | This object allows to specify the expected QL when the Ethernet Port is enabled for QL Mode. This object is only applicable for Synchronous Ethernet capable po… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.77 | ColumncmEthernetTrafficPortAssumedQL | read-write | current | This object allows to specify the assumed QL on the Ethernet Port. This object is only applicable for Synchronous Ethernet capable ports. The Assumed QL is onl… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.78 | ColumncmEthernetTrafficPortReceivedQL | read-only | current | This object provides the Received QL value for the Ethernet port. If the Ethernet port TransmitQL Mode is disabled, then the received QL value is not applicabl… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.79 | ColumncmEthernetTrafficPortTransmitQL | read-only | current | This object provides the Transmitted QL value for the Ethernet port. If the Ethernet port TransmitQL Mode is disabled, then the received QL value is not applic… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.80 | ColumncmEthernetTrafficPortPhyType | read-write | current | This object is valid only to XGE card. And the value should be LAN or WAN when it is XGE card. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.81 | ColumncmEthernetTrafficPortSfpLaserWaveLengthPicometer | read-only | current | This object provide laser wavelength pico value. For example, laser wavelength is 1510.01, then cmEthernetTrafficPortSfpLaserWaveLength=1510 and cmTrafficPortS… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.82 | ColumncmEthernetTrafficPortRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.83 | ColumncmEthernetTrafficPortSSMRemoteMacAddress | read-only | current | This object allows retrieval of the Remote Mac Address, when the port is peering using SSM. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.84 | ColumncmEthernetTrafficPortInnerVlanLoopbackMask | read-write | current | This object allows specification of the inner VLANs to be looped back when port is in vlan(terminal/facility) loopback configuration. Only 3 VLANs can be speci… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.85 | ColumncmEthernetTrafficPortInnerVlanLoopback1 | read-write | current | This object allows specification of the inner VLAN 1 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.86 | ColumncmEthernetTrafficPortInnerVlanLoopback2 | read-write | current | This object allows specification of the inner VLAN 2 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.87 | ColumncmEthernetTrafficPortInnerVlanLoopback3 | read-write | current | This object allows specification of the inner VLAN 3 to be looped back when port is in vlan(terminal/facility) loopback configuration. This is valid only if th… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.88 | ColumncmEthernetTrafficPortLaserWDMChannel | read-write | current | Channel number of WDM tunable XFP setting. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.89 | ColumncmEthernetTrafficPortLaserIsTunable | read-only | current | This object means this module whether tunnable. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.90 | ColumncmEthernetTrafficPortLaserFrequency | read-only | current | This object describes this module's frequency, and the step is 1GHZ. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.91 | ColumncmEthernetTrafficPortDeiEnable | read-write | deprecated | This object describes whether use DEI bit in S-tag to recognize Drop Eligibility Parameter for ingress S-tag packets or Set DEI bit for egress S-tag Packets. T… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.92 | ColumncmEthernetTrafficPortPcpDEEncType | read-write | current | This object describes the PCP encoding mode for egress packets and the PCP decoding mode for ingress packets on this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.93 | ColumncmEthernetTrafficPortPcpDEPairsAction | read-write | current | This object describes this port pcp de pairs action. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.94 | ColumncmEthernetTrafficPortInitiateDiag | read-write | current | This object allows to initiate Etherjack diagnosis on the Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.95 | ColumncmEthernetTrafficPortDiagnosePair1Cond | read-only | current | This object provides diagnosis results for the cable Pair 1 on Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.96 | ColumncmEthernetTrafficPortDiagnosePair2Cond | read-only | current | This object provides diagnosis results for the cable Pair 2 on Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.97 | ColumncmEthernetTrafficPortDiagnosePair3Cond | read-only | current | This object provides diagnosis results for the cable Pair 3 on Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.98 | ColumncmEthernetTrafficPortDiagnosePair4Cond | read-only | current | This object provides diagnosis results for the cable Pair 4 on Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.99 | ColumncmEthernetTrafficPortDiagnoseAutoNegCond | read-only | current | This object provides auto negotiation results of the diagnosis test on Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.100 | ColumncmEthernetTrafficPortDiagnoseLpbkCond | read-only | current | This object provides port loopback results of the diagnosis test on Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.101 | ColumncmEthernetTrafficPortDiagnoseEfmLpbkCond | read-only | current | This object provides remote EFM loopback results of the diagnosis test on Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.102 | ColumncmEthernetTrafficPortDiagnoseResult | read-only | current | This object provides results of the diagnosis test in string form on Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.103 | ColumncmEthernetTrafficPortDiagnoseTestStatus | read-only | current | This object provides the current status of the diagnosis test on Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.104 | ColumncmEthernetTrafficPortDiagnoseTestTime | read-only | current | This object provides the time when diagnosis test was last executed. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.105 | ColumncmEthernetTrafficPortAutoDiagEnabled | read-write | current | This object allows to enable or disable the automatic Cable Diagnostic tests when the cable is removed from the port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.106 | ColumncmEthernetTrafficPortDeleteEntitiesAction | read-write | current | This object allows to delete esa entities relate this port and Cfm entities relate this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.107 | ColumncmEthernetTrafficPortMaxMpFpNum | read-write | current | This object allows to set the mpflow max fp number, and now only the ports on ethernet10x1GCard, ethernet1x10GCard, ethernet1x10GHighPerCard, ethernet10x1GHigh… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.108 | ColumncmEthernetTrafficPortJdsuLoopbackEnabled | read-write | deprecated | This object allows to enable or disable jdsu loopback on this port. Note: This object is deprecated. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.109 | ColumncmEthernetTrafficPortJdsuLoopbackVlanId | read-only | deprecated | This object allows to set the jdsu loopback vlan. if status is jdsu-terminal-port-tailend(19) or jdsu-facility-port-tailend(21), then VID is 0 means not applic… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.110 | ColumncmEthernetTrafficPortIngressPopPriorityVidEnabled | read-write | current | This object defines the Ingress PopPriorityVid enable or disable of the port. If it is enabled, then incoming priority tagged packet's VID is swapped to Priori… |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.111 | ColumncmEthernetTrafficPortRxDeiAction | read-write | current | This object allows to specify the Receive DEI Action. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.112 | ColumncmEthernetTrafficPortTxDeiAction | read-write | current | This object allows to specify the Transmit DEI Action. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.113 | ColumncmEthernetTrafficPortRxDeiOuterTagType | read-write | current | This object allows to specify the Receive DEI Outer Tag Type. |
| 1.3.6.1.4.1.2544.1.12.4.1.27.1.114 | ColumncmEthernetTrafficPortTxDeiOuterTagType | read-write | current | This object allows to specify the Transmit DEI Outer Tag Type. |
| 1.3.6.1.4.1.2544.1.12.4.1.28 | TablecmElineFlowTable | not-accessible | current | A list of entries corresponding to Flows for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.28.1 | RowcmElineFlowEntry | not-accessible | current | A conceptual row in the cmElineFlowTable. These entries represent an Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.28.1.1 | ColumncmElineFlowIndex | read-create | current | The integer index value corresponding to an Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.28.1.2 | ColumncmElineFlowCircuitName | read-create | current | This object allows SNMP management entities to provide a circuit identifier with the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.28.1.3 | ColumncmElineFlowAdminState | read-write | current | This object represents the Administrative State of the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.28.1.4 | ColumncmElineFlowOperationalState | read-only | current | This object represents the Operational State of the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.28.1.5 | ColumncmElineFlowSecondaryState | read-only | current | This object represents the Secondary State of the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.28.1.6 | ColumncmElineFlowFP1 | read-create | current | This object allows SNMP management entities to provide a flowpoint with the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.28.1.7 | ColumncmElineFlowFP2 | read-create | current | This object allows SNMP management entities to provide another flowpoint with the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.28.1.8 | ColumncmElineFlowStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.28.1.9 | ColumncmElineFlowRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.29 | TablecmFlowPointTable | not-accessible | current | A list of entries corresponding to FlowPoint for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1 | RowcmFlowPointEntry | not-accessible | current | A conceptual row in the cmFlowPointTable. These entries represent an FlowPoint. If the flowpoint attached to a lag, the slotIndex should be 255(255 is used to … |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.1 | ColumncmFlowPointIndex | read-create | current | The integer index value corresponding to an FlowPoint. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.2 | ColumncmFlowPointCircuitName | read-create | current | This object allows SNMP management entities to provide a circuit identifier with the FlowPoint. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.3 | ColumncmFlowPointAdminState | read-write | current | This object represents the Administrative State of the FlowPoint. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.4 | ColumncmFlowPointOperationalState | read-only | current | This object represents the Operational State of the FlowPoint. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.5 | ColumncmFlowPointSecondaryState | read-only | current | This object represents the Secondary State of the FlowPoint. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.6 | ColumncmFlowPointAssociatedFlowId | read-only | current | This object provides the association of an Flow with an FlowPoint. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.7 | ColumncmFlowPointIngressMultiCOS | read-create | current | This object allows specification of ingress multiple COS (Class of Service) FlowPoint. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.8 | ColumncmFlowPointIngressCOS | read-create | current | This object allows specification of ingress COS (Class of Service) FlowPoint. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.9 | ColumncmFlowPointIngressVlanMemberList | read-create | current | It allows specification of VLAN members of the FlowPoint. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. … |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.10 | ColumncmFlowPointVlanMemberAction | read-write | current | This object allows to add or remove the VLAN members specified by cmFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member to … |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.11 | ColumncmFlowPointVlanMemberActionVlan | read-create | current | This object allows adding/removing VLAN members to a flowpoint. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN members … |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.12 | ColumncmFlowPointIngressUntaggedFrameEnabled | read-create | current | This object allows to specify whether or not the flowpoint supports untagged frame. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.13 | ColumncmFlowPointCTagControl | read-create | current | This object allows specification of the tag management operation on the C-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the t… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.14 | ColumncmFlowPointCTagVlanId | read-create | current | This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowPointIngressCTagControl. It is applicable for 'push', 'swa… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.15 | ColumncmFlowPointCTagVlanPriority | read-create | current | This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowPointIngressCTagControl. It is applicable for 'push'… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.16 | ColumncmFlowPointSTagControl | read-create | current | This object allows specification of the tag management operation on the S-TAG. Supported types are 'push', 'pushvid', 'swaptag', 'swapvid' and 'none'. If the t… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.17 | ColumncmFlowPointSTagVlanId | read-create | current | This object allows specification of the VLAN Id to be pushed or swapped, based on the value of cmFlowPointIngressSTagControl. It is applicable for 'push', 'swa… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.18 | ColumncmFlowPointSTagVlanPriority | read-create | current | This object allows specification of the VLAN Priority to be pushed or swapped, based on the value of cmFlowPointIngressSTagControl. It is applicable for 'push'… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.19 | ColumncmFlowPointEgressOuterTagPrioMapEnabled | read-create | current | This object defines whether to use the Egress Prio Mapping to swap the priority of outer tag. When Enabled,it indicates that the operation specified in the Egr… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.20 | ColumncmFlowPointColorMarkingSupported | read-create | current | This object defines the egress color marking. If set to Enabled, the DEI bit of S-tag pushed will be remarked according the meter result. If set to Disabled, t… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.21 | ColumncmFlowPointAssociatedAclProfile | read-create | current | This object provides the association of an Flow with an ACL profile. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.22 | ColumncmFlowPointSESFramesLossThresholdRatio | read-write | current | This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the flowpoint. This functionality is applic… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.23 | ColumncmFlowPointStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.24 | ColumncmFlowPointRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.25 | ColumncmFlowPointDefaultMemberEnabled | read-write | current | defaultMemberEnabled with enabled means that on this FP, the membership is all the tag packets without match any other membership associated to the port. Untag… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.26 | ColumncmFlowPointMcastRateLimitEnabled | read-write | current | Whether multicast packets need be limited per FP. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.27 | ColumncmFlowPointMcastRateLimitSpeedLo | read-write | current | The rate limiting for multicast packets per FP When cmFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.28 | ColumncmFlowPointMcastRateLimitSpeedHi | read-write | current | The rate limiting for multicast packets per FP When cmFlowPointMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.29 | ColumncmFlowPointBcastRateLimitEnabled | read-write | current | Whether broadcast packets need be limited per FP. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.30 | ColumncmFlowPointBcastRateLimitSpeedLo | read-write | current | The rate limiting for broadcast packets per FP When cmFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.31 | ColumncmFlowPointBcastRateLimitSpeedHi | read-write | current | The rate limiting for broadcast packets per FP When cmFlowPointBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This objects… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.32 | ColumncmFlowPointSplitHorizonGroupOID | read-write | current | Specifies the Split-Horizon Group EID. If there is no SHG, the value is none. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.33 | ColumncmFlowPointLoopAvoidance | read-write | current | EID of this associated Loop Avoidance protocol entity. A value of NONE indicates there is no loop avoidance protocol. Currently ERP EID is filled when ELAN ser… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.34 | ColumncmFlowPointHierarchicalCosEnabled | read-write | current | Enable or Disable Hierarchical COS shaping (flow shaping). |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.35 | ColumncmFlowPointWfqQid | read-write | current | This attribute description the WFQ Qid. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.36 | ColumncmFlowPointWfqOutPriority | read-write | current | This attribute description the WFQ out priority. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.37 | ColumncmFlowPointMaximumBWLo | read-write | current | This attribute description the flow point maximum bandwidth. This objects only represents low 32 bits. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.38 | ColumncmFlowPointMaximumBWHi | read-write | current | This attribute description the flow point maximum bandwidth. This objects only represents high 32 bits. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.39 | ColumncmFlowPointGuaranteedBWLo | read-write | current | This attribute description the flow point guaranteed bandwidth. This objects only represents low 32 bits. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.40 | ColumncmFlowPointGuaranteedBWHi | read-write | current | This attribute description the flow point guaranteed bandwidth. This objects only represents high 32 bits. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.41 | ColumncmFlowPointRefPrioMapProfile | read-write | current | This object allows to set priority map profile. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.42 | ColumncmFlowPointMcastAndBcastRateLimitEnabled | read-write | current | Whether multicast packets and broadcast packets need be limited per FP. |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.43 | ColumncmFlowPointMcastAndBcastRateLimitSpeedLo | read-write | current | The rate limiting for multicast packets and broadcast packets per FP When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0, it means all multicast f… |
| 1.3.6.1.4.1.2544.1.12.4.1.29.1.44 | ColumncmFlowPointMcastAndBcastRateLimitSpeedHi | read-write | current | The rate limiting for multicast packets and broadcast packets per FP When cmFlowPointMcastAndBcastRateLimitEnabled and the value is 0, it means all multicast f… |
| 1.3.6.1.4.1.2544.1.12.4.1.30 | TablecmOAMFlowPointTable | not-accessible | current | A list of entries corresponding to OAMFlowPoint for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.30.1 | RowcmOAMFlowPointEntry | not-accessible | current | A conceptual row in the cmOAMFlowPointTable. These entries represent an FlowPoint. If the oam flowpoint attached to a lag, the slotIndex should be 255(255 is u… |
| 1.3.6.1.4.1.2544.1.12.4.1.30.1.1 | ColumncmOAMFlowPointIndex | read-create | current | The integer index value corresponding to an OAMFlowPoint. |
| 1.3.6.1.4.1.2544.1.12.4.1.30.1.2 | ColumncmOAMFlowPointCircuitName | read-create | current | This object allows SNMP management entities to provide a circuit identifier with the OAMFlowPoint. |
| 1.3.6.1.4.1.2544.1.12.4.1.30.1.3 | ColumncmOAMFlowPointAdminState | read-write | current | This object represents the Administrative State of the OAMFlowPoint. |
| 1.3.6.1.4.1.2544.1.12.4.1.30.1.4 | ColumncmOAMFlowPointOperationalState | read-only | current | This object represents the Operational State of the OAMFlowPoint. |
| 1.3.6.1.4.1.2544.1.12.4.1.30.1.5 | ColumncmOAMFlowPointSecondaryState | read-only | current | This object represents the Secondary State of the OAMFlowPoint. |
| 1.3.6.1.4.1.2544.1.12.4.1.30.1.6 | ColumncmOAMFlowPointIngressVlanMemberList | read-create | current | It allows specification of VLAN members of the OAMFlowPoint. VLAN members are comma separated, of the form X-Y where X is the VLAN Id and Y is the VLAN Priorit… |
| 1.3.6.1.4.1.2544.1.12.4.1.30.1.7 | ColumncmOAMFlowPointVlanMemberAction | read-write | current | This object allows to add or remove the VLAN members specified by cmOAMFlowPointVlanMemberActionVlan object. SNMP manager must first configure the VLAN member … |
| 1.3.6.1.4.1.2544.1.12.4.1.30.1.8 | ColumncmOAMFlowPointVlanMemberActionVlan | read-create | current | This object allows adding/removing VLAN members to a oam flowpoint. VLAN member is of the form X-Y where X is the VLAN Id and Y is the VLAN Priority. VLAN memb… |
| 1.3.6.1.4.1.2544.1.12.4.1.30.1.9 | ColumncmOAMFlowPointIngressUntaggedFrameSupported | read-create | current | This object allows to specify whether or not the OAMFlowPoint supports untagged frame. |
| 1.3.6.1.4.1.2544.1.12.4.1.30.1.10 | ColumncmOAMFlowPointSESFramesLossThresholdRatio | read-write | current | This object is used to specify the frame-loss ratio per flow that starts counting Severely Errored Seconds (SES) on the oam flowpoint. This functionality is ap… |
| 1.3.6.1.4.1.2544.1.12.4.1.30.1.11 | ColumncmOAMFlowPointStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.30.1.12 | ColumncmOAMFlowPointRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.31 | TablecmIngressPrioMapTable | not-accessible | current | A list of entries corresponding to Ingress Priority Mapping for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.31.1 | RowcmIngressPrioMapEntry | not-accessible | current | A conceptual row in the cmIngressPrioMapTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.31.1.1 | ColumncmIngressPrioMapIndex | read-only | current | The integer index value corresponding to a priority value based on the cmEthernetTrafficPortPrioMapMode. In case of TOS and 8021P, valid indices are 1 to 8, in… |
| 1.3.6.1.4.1.2544.1.12.4.1.31.1.2 | ColumncmIngressPrioMapInPriority | read-write | current | The integer index value corresponding to a priority value based on the cmEthernetTrafficPortIngressPrioMapMode. In case of TOS and 8021P, valid indices are 0 t… |
| 1.3.6.1.4.1.2544.1.12.4.1.31.1.3 | ColumncmIngressPrioMapCOS | read-write | current | This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.32 | TablecmEgressPrioMapTable | not-accessible | current | A list of entries corresponding to Egress Priority Mapping for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.32.1 | RowcmEgressPrioMapEntry | not-accessible | current | A conceptual row in the cmEgressPrioMapTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.32.1.1 | ColumncmEgressCOSIndex | read-only | current | The integer index used to uniquely identify this Egress Priority Map Entry |
| 1.3.6.1.4.1.2544.1.12.4.1.32.1.2 | ColumncmEgressCOS | read-write | current | This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.32.1.3 | ColumncmEgressOuterTagCtrl | read-write | current | This object defines the behavior of the Priority portion of the frame transmit out. If NONE is selected, the outgoing priority bits are left unchanged. If SWAP… |
| 1.3.6.1.4.1.2544.1.12.4.1.32.1.4 | ColumncmEgressOuterTagPriority | read-write | current | This object defines the new priority bits to be used, it is available only if Outer-Tag PRIOCTL is set to SWAP. |
| 1.3.6.1.4.1.2544.1.12.4.1.33 | TablecmPortCpdProfileTable | not-accessible | current | A list of entries corresponding to System Control Protocol Disposition V3 profile. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1 | RowcmPortCpdProfileEntry | not-accessible | current | A conceptual row in the cmPortCpdProfileTable. These entries represent a Control Protocol Disposition of a port filtering criteria of the System. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.1 | ColumncmPortCpdProfileIndex | read-only | current | Unique Index value to access the CPD profile row. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.2 | ColumncmPortCpdProfileName | read-write | current | This object describes the alias of the cpd V3 profile entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.3 | ColumncmPortCpdProfileCiscoGroupDispType | read-write | deprecated | Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, U… |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.4 | ColumncmPortCpdProfileIslDispType | read-write | current | Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.5 | ColumncmPortCpdProfilePagpDispType | read-write | current | Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.6 | ColumncmPortCpdProfileUdldDispType | read-write | current | Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.7 | ColumncmPortCpdProfileCdpDispType | read-write | current | Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.8 | ColumncmPortCpdProfileVtpDispType | read-write | current | Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.9 | ColumncmPortCpdProfileDtpDispType | read-write | current | Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.10 | ColumncmPortCpdProfilePvstpPlusDispType | read-write | current | Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.11 | ColumncmPortCpdProfileUplinkFastDispType | read-write | current | Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.12 | ColumncmPortCpdProfileVlanBridgeDispType | read-write | current | Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.13 | ColumncmPortCpdProfileL2PTDispType | read-write | current | Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.14 | ColumncmPortCpdProfileBridgeGroupDispType | read-write | deprecated | Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Contro… |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.15 | ColumncmPortCpdProfileBPDUDispType | read-write | current | Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C… |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.16 | ColumncmPortCpdProfilePauseDispType | read-write | current | Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.17 | ColumncmPortCpdProfileLACPDispType | read-write | current | Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.18 | ColumncmPortCpdProfileLACPMarkerDispType | read-write | current | Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.19 | ColumncmPortCpdProfileEfmOamDispType | read-write | current | Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.20 | ColumncmPortCpdProfileSSMDispType | read-write | current | Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.21 | ColumncmPortCpdProfilePortAuthenDispType | read-write | current | Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.22 | ColumncmPortCpdProfileBridgeReservedDispType | read-write | deprecated | Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0… |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.23 | ColumncmPortCpdProfileLANBridgesDispType | read-write | current | Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.24 | ColumncmPortCpdProfileGARPGroupDispType | read-write | deprecated | Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:22 to… |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.25 | ColumncmPortCpdProfileGMRPDispType | read-write | current | Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.26 | ColumncmPortCpdProfileGVRPDispType | read-write | current | Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:22). |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.27 | ColumncmPortCpdProfileGARPDispType | read-write | current | Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.28 | ColumncmPortCpdProfileLldpDispType | read-write | deprecated | Deprecated - each LLDP MAC protocol has its own disposition. Control Protocol Disposition for LLDP. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.29 | ColumncmPortCpdProfileStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.30 | ColumncmPortCpdProfileRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.31 | ColumncmPortCpdProfileMac00DispType | read-write | current | MAC Address 01:80:C2:00:00:00 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.32 | ColumncmPortCpdProfileMac01DispType | read-write | current | MAC Address 01:80:C2:00:00:01 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.33 | ColumncmPortCpdProfileMac02DispType | read-write | current | MAC Address 01:80:C2:00:00:02 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.34 | ColumncmPortCpdProfileMac03DispType | read-write | current | MAC Address 01:80:C2:00:00:03 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.35 | ColumncmPortCpdProfileMac04DispType | read-write | current | MAC Address 01:80:C2:00:00:04 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.36 | ColumncmPortCpdProfileMac05DispType | read-write | current | MAC Address 01:80:C2:00:00:05 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.37 | ColumncmPortCpdProfileMac06DispType | read-write | current | MAC Address 01:80:C2:00:00:06 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.38 | ColumncmPortCpdProfileMac07DispType | read-write | current | MAC Address 01:80:C2:00:00:07 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.39 | ColumncmPortCpdProfileMac08DispType | read-write | current | MAC Address 01:80:C2:00:00:08 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.40 | ColumncmPortCpdProfileMac09DispType | read-write | current | MAC Address 01:80:C2:00:00:09 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.41 | ColumncmPortCpdProfileMac0ADispType | read-write | current | MAC Address 01:80:C2:00:00:0A Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.42 | ColumncmPortCpdProfileMac0BDispType | read-write | current | MAC Address 01:80:C2:00:00:0B Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.43 | ColumncmPortCpdProfileMac0CDispType | read-write | current | MAC Address 01:80:C2:00:00:0C Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.44 | ColumncmPortCpdProfileMac0DDispType | read-write | current | MAC Address 01:80:C2:00:00:0D Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.45 | ColumncmPortCpdProfileMac0EDispType | read-write | current | MAC Address 01:80:C2:00:00:0E Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.46 | ColumncmPortCpdProfileMac0FDispType | read-write | current | MAC Address 01:80:C2:00:00:0F Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.47 | ColumncmPortCpdProfileNearestLLDPDispType | read-write | current | The nearest lldp Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.48 | ColumncmPortCpdProfileNonTpmrLLDPDispType | read-write | current | The non tp mr lldp Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.49 | ColumncmPortCpdProfileCustomerLLDPDispType | read-write | current | The customer lldp Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.33.1.50 | ColumncmPortCpdProfileELMIDispType | read-write | current | The ELMI Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34 | TablecmFlowPointCpdProfileTable | not-accessible | current | A list of entries corresponding to System Control Protocol Disposition V3 profile. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1 | RowcmFlowPointCpdProfileEntry | not-accessible | current | A conceptual row in the cmFlowPointCpdProfileTable. These entries represent a Control Protocol Disposition of a flow point filtering criteria of the System. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.1 | ColumncmFlowPointCpdProfileIndex | read-only | current | Unique Index value to access the CPD profile row. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.2 | ColumncmFlowPointCpdProfileName | read-write | current | This object describes the alias of the cpd V3 profile entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.3 | ColumncmFlowPointCpdProfileCiscoGroupDispType | read-write | deprecated | Deprecated - each Cisco protocol has its own disposition. Control Protocol Disposition for Cisco Group. This includes ISL, PAGP, UDLD, CDP, VTP, DTP, PSVTP+, U… |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.4 | ColumncmFlowPointCpdProfileIslDispType | read-write | current | Control Protocol Disposition for ISL (Inter Switch Link). MAC Address (01:00:0C:00:00:00). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.5 | ColumncmFlowPointCpdProfilePagpDispType | read-write | current | Control Protocol Disposition for PAGP (Port Aggregation Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x104). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.6 | ColumncmFlowPointCpdProfileUdldDispType | read-write | current | Control Protocol Disposition for UDLD (Unidirectional Link Detection). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x111). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.7 | ColumncmFlowPointCpdProfileCdpDispType | read-write | current | Control Protocol Disposition for CDP (Cisco Discovery Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2000). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.8 | ColumncmFlowPointCpdProfileVtpDispType | read-write | current | Control Protocol Disposition for VTP (VLAN Trunking Protocol). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2003). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.9 | ColumncmFlowPointCpdProfileDtpDispType | read-write | current | Control Protocol Disposition for DTP (Dynamic Trunking). MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x2004). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.10 | ColumncmFlowPointCpdProfilePvstpPlusDispType | read-write | current | Control Protocol Disposition for Spanning Tree PVSTP+. MAC Address (01:00:0C:CC:CC:CC), Ethertype(0x10B). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.11 | ColumncmFlowPointCpdProfileUplinkFastDispType | read-write | current | Control Protocol Disposition for STP UplinkFast. MAC Address (01:00:0C:CD:CD:CD), Ethertype(0x200A). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.12 | ColumncmFlowPointCpdProfileVlanBridgeDispType | read-write | current | Control Protocol Disposition for VLAN Bridge. MAC Address (01:00:0C:CD:CD:CE), Ethertype(0x10C). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.13 | ColumncmFlowPointCpdProfileL2PTDispType | read-write | current | Control Protocol Disposition for Layer 2 Protocol Tunnelling(L2PT). MAC Address (01:00:0C:CD:CD:D0). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.14 | ColumncmFlowPointCpdProfileBridgeGroupDispType | read-write | deprecated | Deprecated - individual dispositions available for each MAC. Bridge Group Control Protocol Disposition Type. This includes BPDU, PAUSE (IEEE 802.3x Flow Contro… |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.15 | ColumncmFlowPointCpdProfileBPDUDispType | read-write | current | Control Protocol Disposition for IEEE Spanning Tree(STP), MSTP (Multiple Spanning Tree) and RSTP (Rapid Reconfiguration of Spanning Tree). MAC Address (01:80:C… |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.16 | ColumncmFlowPointCpdProfilePauseDispType | read-write | current | Control Protocol Disposition for IEEE 802.3x Flow Control (PAUSE frames). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.17 | ColumncmFlowPointCpdProfileLACPDispType | read-write | current | Control Protocol Disposition for 802.3ad Link Aggregation Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(01). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.18 | ColumncmFlowPointCpdProfileLACPMarkerDispType | read-write | current | Control Protocol Disposition for IEEE 802.3ad Marker Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(02). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.19 | ColumncmFlowPointCpdProfileEfmOamDispType | read-write | current | Control Protocol Disposition for IEEE 802.3ah EFM OAM. MAC Address (01:80:C2:00:00:03), Ethertype (0x8809), Subtype(03). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.20 | ColumncmFlowPointCpdProfileSSMDispType | read-write | current | Control Protocol Disposition for Sync Status Messages. MAC Address (01:80:C2:00:00:02), Ethertype (0x19A7), Subtype(0A). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.21 | ColumncmFlowPointCpdProfilePortAuthenDispType | read-write | current | Control Protocol Disposition for IEEE 802.1x Protocol. MAC Address (01:80:C2:00:00:03), Ethertype (0x888E). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.22 | ColumncmFlowPointCpdProfileBridgeReservedDispType | read-write | deprecated | Deprecated - individual dispositions available for each MAC. Control Protocol Disposition for Range of MAC Addresses from 01:80:C2:00:00:04 to 01:80:C2:00:00:0… |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.23 | ColumncmFlowPointCpdProfileLANBridgesDispType | read-write | current | Control Protocol Disposition for IEEE 802.1d LAN Bridge Managment. MAC Address (01:80:C2:00:00:10). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.24 | ColumncmFlowPointCpdProfileGARPGroupDispType | read-write | deprecated | Deprecated - each GARP Group protocol has its own disposition. Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:22 to… |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.25 | ColumncmFlowPointCpdProfileGMRPDispType | read-write | current | Control Protocol Disposition for GARP Multicast Registration Protocol. MAC Address (01:80:C2:00:00:20). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.26 | ColumncmFlowPointCpdProfileGVRPDispType | read-write | current | Control Protocol Disposition for GARP VLAN Registration Protocol. MAC Address (01:80:C2:00:00:22). |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.27 | ColumncmFlowPointCpdProfileGARPDispType | read-write | current | Group Disposition type which includes GMRP, GVRP and MAC Address from range 01:80:C2:00:00:20 to 01:80:C2:00:00:2F. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.28 | ColumncmFlowPointCpdProfileLldpDispType | read-write | deprecated | Deprecated - each LLDP MAC protocol has its own disposition. Control Protocol Disposition for LLDP. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.29 | ColumncmFlowPointCpdProfileStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.30 | ColumncmFlowPointCpdProfileRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.31 | ColumncmFlowPointCpdProfileMac00DispType | read-write | current | MAC Address 01:80:C2:00:00:00 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.32 | ColumncmFlowPointCpdProfileMac01DispType | read-write | current | MAC Address 01:80:C2:00:00:01 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.33 | ColumncmFlowPointCpdProfileMac02DispType | read-write | current | MAC Address 01:80:C2:00:00:02 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.34 | ColumncmFlowPointCpdProfileMac03DispType | read-write | current | MAC Address 01:80:C2:00:00:03 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.35 | ColumncmFlowPointCpdProfileMac04DispType | read-write | current | MAC Address 01:80:C2:00:00:04 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.36 | ColumncmFlowPointCpdProfileMac05DispType | read-write | current | MAC Address 01:80:C2:00:00:05 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.37 | ColumncmFlowPointCpdProfileMac06DispType | read-write | current | MAC Address 01:80:C2:00:00:06 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.38 | ColumncmFlowPointCpdProfileMac07DispType | read-write | current | MAC Address 01:80:C2:00:00:07 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.39 | ColumncmFlowPointCpdProfileMac08DispType | read-write | current | MAC Address 01:80:C2:00:00:08 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.40 | ColumncmFlowPointCpdProfileMac09DispType | read-write | current | MAC Address 01:80:C2:00:00:09 Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.41 | ColumncmFlowPointCpdProfileMac0ADispType | read-write | current | MAC Address 01:80:C2:00:00:0A Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.42 | ColumncmFlowPointCpdProfileMac0BDispType | read-write | current | MAC Address 01:80:C2:00:00:0B Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.43 | ColumncmFlowPointCpdProfileMac0CDispType | read-write | current | MAC Address 01:80:C2:00:00:0C Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.44 | ColumncmFlowPointCpdProfileMac0DDispType | read-write | current | MAC Address 01:80:C2:00:00:0D Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.45 | ColumncmFlowPointCpdProfileMac0EDispType | read-write | current | MAC Address 01:80:C2:00:00:0E Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.46 | ColumncmFlowPointCpdProfileMac0FDispType | read-write | current | MAC Address 01:80:C2:00:00:0F Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.47 | ColumncmFlowPointCpdProfileNearestLLDPDispType | read-write | current | The nearest lldp Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.48 | ColumncmFlowPointCpdProfileNonTpmrLLDPDispType | read-write | current | The non tp mr lldp Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.49 | ColumncmFlowPointCpdProfileCustomerLLDPDispType | read-write | current | The customer lldp Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.34.1.50 | ColumncmFlowPointCpdProfileELMIDispType | read-write | current | The ELMI Disposition type. |
| 1.3.6.1.4.1.2544.1.12.4.1.35 | TablecmEthernetTrafficPortCpdTable | not-accessible | current | A list of entries corresponding to Ethernet Port CPD for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.35.1 | RowcmEthernetTrafficPortCpdEntry | not-accessible | current | A conceptual row in the cmEthernetTrafficPortCpdTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.35.1.1 | ColumncmEthernetTrafficPortCpdIndex | read-only | current | An arbitrary integer index value used to uniquely identify this CPD Service Entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.35.1.2 | ColumncmEthernetTrafficPortAssociatedCpdProfile | read-write | current | An integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex. |
| 1.3.6.1.4.1.2544.1.12.4.1.36 | TablecmEthernetFlowPointCpdTable | not-accessible | current | A list of entries corresponding to Ethernet Flow Point CPD for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.36.1 | RowcmEthernetFlowPointCpdEntry | not-accessible | current | A conceptual row in the cmEthernetFlowPointCpdTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.36.1.1 | ColumncmEthernetFlowPointCpdIndex | read-only | current | An arbitrary integer index value used to uniquely identify this CPD Service Entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.36.1.2 | ColumncmEthernetFlowPointAssociatedCpdProfile | read-write | current | An integer index value used to apply cmCpdProfile configure, corresponding to cmCpdProfileIndex. |
| 1.3.6.1.4.1.2544.1.12.4.1.37 | TablecmTrafficAclProfileTable | not-accessible | current | A list of entries corresponding to the Traffic Profile Rules Entry. It provides upto 4000 Traffic ACL Rules to be configured. |
| 1.3.6.1.4.1.2544.1.12.4.1.37.1 | RowcmTrafficAclProfileEntry | not-accessible | current | An entry containing information applicable to a system ACL Profile that can be configured. |
| 1.3.6.1.4.1.2544.1.12.4.1.37.1.1 | ColumncmTrafficAclProfileIndex | read-create | current | An arbitrary integer index value used to uniquely identify Traffic ACL profile entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.37.1.2 | ColumncmTrafficAclProfileName | read-write | current | This object describes the alias of the Acl profile entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.37.1.3 | ColumncmTrafficAclProfileStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.37.1.4 | ColumncmTrafficAclProfileRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.38 | TablecmTrafficAclRulesTable | not-accessible | current | A list of entries corresponding to the Traffic ACL Rules Entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1 | RowcmTrafficAclRulesEntry | not-accessible | current | An entry containing information applicable to a system ACL Rules that can be configured. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.1 | ColumncmTrafficAclRulesIndex | read-create | current | An arbitrary integer index value used to uniquely identify Traffic ACL profile entry. The manager may not assume any particular semantics or meaning to this in… |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.2 | ColumncmTrafficAclFilterAction | read-write | current | Currently, 'permit' and 'deny' are supported. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.3 | ColumncmTrafficAclFilterType | read-write | current | This object describes the Acl filter type. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.4 | ColumncmTrafficAclEnabled | read-write | current | This object enables/disables the Acl entity. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.5 | ColumncmTrafficAclSrcMacAddr | read-write | current | The source mac address of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.6 | ColumncmTrafficAclSrcMacAddrEnabled | read-write | current | This object enables/disables source MAC address of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.7 | ColumncmTrafficAclDstMacAddr | read-write | current | The destination MAC address of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.8 | ColumncmTrafficAclDstMacAddrEnabled | read-write | current | This object enables/disables destination MAC address of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.9 | ColumncmTrafficAclSrcIpFilterEnabled | read-write | current | This object enable/disable Source IPV4 or IPV6 address filter criteria. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.10 | ColumncmTrafficAclDstIpFilterEnabled | read-write | current | This object enable/disable Destination IPV4 or IPV6 address filter criteria. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.11 | ColumncmTrafficAclSrcIpV4Addr | read-write | current | The source IP address of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.12 | ColumncmTrafficAclSrcIpV4AddrMask | read-write | current | The source IP mask of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.13 | ColumncmTrafficAclDstIpV4Addr | read-write | current | The destination IP address of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.14 | ColumncmTrafficAclDstIpV4AddrMask | read-write | current | The destination IP mask of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.15 | ColumncmTrafficAclSrcIpV6Addr | read-write | current | The source IPV6 address of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.16 | ColumncmTrafficAclSrcIpV6AddrMask | read-write | current | The source IPV6 mask of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.17 | ColumncmTrafficAclDstIpV6Addr | read-write | current | The destination IPV6 address of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.18 | ColumncmTrafficAclDstIpV6AddrMask | read-write | current | The destination IPV6 mask of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.19 | ColumncmTrafficAclTcpUdpSrcPortNum | read-write | current | This object describes TCP/UDP minimum source port number of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.20 | ColumncmTrafficAclTcpUdpSrcPortMask | read-write | current | This object describes TCP/UDP maximum source port number of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.21 | ColumncmTrafficAclTcpUdpSrcPortEnabled | read-write | current | This object enables/disables TCP/UDP source port of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.22 | ColumncmTrafficAclTcpUdpDstPortNum | read-write | current | This object describes TCP/UDP minimum destination port number of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.23 | ColumncmTrafficAclTcpUdpDstPortMask | read-write | current | This object describes TCP/UDP maximum destination port number of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.24 | ColumncmTrafficAclTcpUdpDstPortEnabled | read-write | current | This object enables/disables TCP/UDP destination port of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.25 | ColumncmTrafficAclIpQosType | read-write | current | This object describes QosType Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.26 | ColumncmTrafficAclIpQosValue | read-write | current | This object describes QOS value of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.27 | ColumncmTrafficAclIpQosTypeEnabled | read-write | current | This object enables/disables qos type of acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.28 | ColumncmTrafficAclVlanId | read-write | current | This object describes the vlan Id of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.29 | ColumncmTrafficAclVlanIdEnabled | read-write | current | This object enables/disables Vlan Id of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.30 | ColumncmTrafficAclVlanPriority | read-write | current | This object describes the Vlan Priority of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.31 | ColumncmTrafficAclVlanPriorityEnabled | read-write | current | This object enables/disables Vlan Priority of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.32 | ColumncmTrafficAclProtocolType | read-write | current | This object describes protocol type of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.33 | ColumncmTrafficAclProtocolTypeEnabled | read-write | current | This object enables/disables protocol type of Acl entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.34 | ColumncmTrafficAclStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.38.1.35 | ColumncmTrafficAclRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.39 | TablecmQosPolicerProfileTable | not-accessible | current | A list of entries corresponding to Quality of Service Policer for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.39.1 | RowcmQosPolicerProfileEntry | not-accessible | current | A conceptual row in the cmQosPolicerProfileTable. These entries represent a Quality of Service Policer. |
| 1.3.6.1.4.1.2544.1.12.4.1.39.1.1 | ColumncmQosPolicerProfileIndex | read-create | current | This object defines the Policer profile ID. Up to 1000 profiles can be specified per system. |
| 1.3.6.1.4.1.2544.1.12.4.1.39.1.2 | ColumncmQosPolicerProfileName | read-create | current | This object defines the alias for this profile |
| 1.3.6.1.4.1.2544.1.12.4.1.39.1.3 | ColumncmQosPolicerProfileCIRLo | read-create | current | This object allows specification of the Commited Information Rate(CIR) on Policer Profile. This represents the lower 32 bits of the CIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.39.1.4 | ColumncmQosPolicerProfileCIRHi | read-create | current | This object allows specification of the Commited Information Rate(CIR) on Policer Profile. This represents the upper 32 bits of the CIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.39.1.5 | ColumncmQosPolicerProfileEIRLo | read-create | current | This object allows specification of the Excess Information Rate(EIR) on the Policer Profile. This represents the lower 32 bits of the EIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.39.1.6 | ColumncmQosPolicerProfileEIRHi | read-create | current | This object allows specification of the Excess Information Rate(EIR) on the Policer Profile. This represents the upper 32 bits of the EIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.39.1.7 | ColumncmQosPolicerProfileCBS | read-create | current | This object allows specification of the Commited Burst Size (CBS) on Policer Profile. |
| 1.3.6.1.4.1.2544.1.12.4.1.39.1.8 | ColumncmQosPolicerProfileEBS | read-create | current | This object allows specification of the Excess Burst Size (EBS) on the Policer Profile. |
| 1.3.6.1.4.1.2544.1.12.4.1.39.1.9 | ColumncmQosPolicerProfileColorMode | read-create | current | This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'. |
| 1.3.6.1.4.1.2544.1.12.4.1.39.1.10 | ColumncmQosPolicerProfileCouplingFlag | read-create | current | This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bu… |
| 1.3.6.1.4.1.2544.1.12.4.1.39.1.11 | ColumncmQosPolicerProfileStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.39.1.12 | ColumncmQosPolicerProfileRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.40 | TablecmQosQueueProfileTable | not-accessible | current | A list of entries corresponding to Quality of Service Queue for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.40.1 | RowcmQosQueueProfileEntry | not-accessible | current | A conceptual row in the cmQosQueueProfileTable. These entries represent a Quality of Service Queue. |
| 1.3.6.1.4.1.2544.1.12.4.1.40.1.1 | ColumncmQosQueueProfileIndex | read-create | current | This object defines the Queue profile ID. Up to 64 profiles can be specified per system. |
| 1.3.6.1.4.1.2544.1.12.4.1.40.1.2 | ColumncmQosQueueProfileName | read-create | current | This object defines the alias for this profile |
| 1.3.6.1.4.1.2544.1.12.4.1.40.1.3 | ColumncmQosQueueProfileBufferSize | read-create | current | This object defines the buffer size of the selected queues. |
| 1.3.6.1.4.1.2544.1.12.4.1.40.1.4 | ColumncmQosQueueProfileREDEnabled | read-create | current | This object defines whether the WRED is enabled as congestion algorithm or not. If disabled, then the following RED parameters (cmQueueProfileWREDDp0MinTh, cmQ… |
| 1.3.6.1.4.1.2544.1.12.4.1.40.1.5 | ColumncmQosQueueProfileStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.40.1.6 | ColumncmQosQueueProfileRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.41 | TablecmQosPolicerV2Table | not-accessible | current | A list of entries corresponding to Quality of Service Policer for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.41.1 | RowcmQosPolicerV2Entry | not-accessible | current | A conceptual row in the cmQosPolicerV2Table. These entries represent a Quality of Service Policer. |
| 1.3.6.1.4.1.2544.1.12.4.1.41.1.1 | ColumncmQosPolicerV2Index | read-create | current | The Policer Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on. |
| 1.3.6.1.4.1.2544.1.12.4.1.41.1.2 | ColumncmQosPolicerV2AdminState | read-write | current | This object represents the Administrative State of the QOS Policer. |
| 1.3.6.1.4.1.2544.1.12.4.1.41.1.3 | ColumncmQosPolicerV2OperationalState | read-only | current | This object represents the Operational State of the QOS Policer. |
| 1.3.6.1.4.1.2544.1.12.4.1.41.1.4 | ColumncmQosPolicerV2SecondaryState | read-only | current | This object represents the Secondary State of the QOS Policer. |
| 1.3.6.1.4.1.2544.1.12.4.1.41.1.5 | ColumncmQosPolicerV2ColorMarkingEnabled | read-only | current | This object indicates the colorMarking state of the QOS Policer. |
| 1.3.6.1.4.1.2544.1.12.4.1.41.1.6 | ColumncmQosPolicerV2AssociatedProfile | read-create | current | This object define the queue profile ID to be used, it is associated with the cmQosPolicerProfileIndex. |
| 1.3.6.1.4.1.2544.1.12.4.1.41.1.7 | ColumncmQosPolicerV2StorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.41.1.8 | ColumncmQosPolicerV2RowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.41.1.9 | ColumncmQosPolicerV2PolicingEnabled | read-write | current | Whether enable or disable the functionality of policing for this COS. |
| 1.3.6.1.4.1.2544.1.12.4.1.42 | TablecmQosShaperV2Table | not-accessible | current | A list of entries corresponding to Quality of Service ShaperV2 for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1 | RowcmQosShaperV2Entry | not-accessible | current | A conceptual row in the cmQosShaperV2Table. These entries represent a Quality of Service Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.1 | ColumncmQosShaperV2Index | read-create | current | The ShaperV2 Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.2 | ColumncmQosShaperV2AdminState | read-write | current | This object represents the Administrative State of the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.3 | ColumncmQosShaperV2OperationalState | read-only | current | This object represents the Operational State of the QOS ShaperV2. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.4 | ColumncmQosShaperV2SecondaryState | read-only | current | This object represents the Secondary State of the QOS QosShaperV2. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.5 | ColumncmQosShaperV2AssociatedQueueProfile | read-create | current | This object defines the queue profile ID to be used, it is associated with the cmQosQueueProfileIndex. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.6 | ColumncmQosShaperV2CIRLo | read-write | current | This object specifies the Lower 32 bits of CIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.7 | ColumncmQosShaperV2CIRHi | read-write | current | This object specifies the Higher 32 bits of CIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.8 | ColumncmQosShaperV2EIRLo | read-write | current | This object specifies the Lower 32 bits of EIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.9 | ColumncmQosShaperV2EIRHi | read-write | current | This object specifies the Higher 32 bits of EIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.10 | ColumncmQosShaperV2IngressAverageFrameSize | read-create | current | This object defines the average frame size for accounting for Meter/Shaping. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.11 | ColumncmQosShaperV2StorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.12 | ColumncmQosShaperV2RowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.13 | ColumncmQosShaperV2AdditionalCIRLo | read-write | current | This object specifies the Lower 32 bits of additional CIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.14 | ColumncmQosShaperV2AdditionalCIRHi | read-write | current | This object specifies the Higher 32 bits of additional CIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.15 | ColumncmQosShaperV2WFQWeight | read-write | current | Weight of queue to be scheduled by WFQ mechanism. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.16 | ColumncmQosShaperV2ActualCIR | read-only | current | This object specifies the actual CIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.17 | ColumncmQosShaperV2ActualEIR | read-only | current | This object specifies the actual EIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.42.1.18 | ColumncmQosShaperV2LowLatencyControl | read-write | current | This object specifies low latency control whether enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.43 | TablecmTrafficPortQosShaperTable | not-accessible | current | A list of entries corresponding to Quality of Service Shaper for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1 | RowcmTrafficPortQosShaperEntry | not-accessible | current | A conceptual row in the cmTrafficPortQosShaperTable. These entries represent a Quality of Service Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.1 | ColumncmTrafficPortQosShaperIndex | read-create | current | The ShaperV2 Index that represents the COS level. Index 1 represents COS 0; Index 2 represents COS 1 and so on. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.2 | ColumncmTrafficPortQosShaperAdminState | read-write | current | This object represents the Administrative State of the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.3 | ColumncmTrafficPortQosShaperOperationalState | read-only | current | This object represents the Operational State of the QOS ShaperV2. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.4 | ColumncmTrafficPortQosShaperSecondaryState | read-only | current | This object represents the Secondary State of the QOS LagQosShaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.5 | ColumncmTrafficPortQosShaperAssociatedQueueProfile | read-create | current | This object defines the queue profile ID to be used, it is associated with the cmQosQueueProfileIndex. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.6 | ColumncmTrafficPortQosShaperBufferSize | read-create | current | This object defines the buffer size of Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.7 | ColumncmTrafficPortQosShaperCIRLo | read-create | current | This object specifies the Lower 32 bits of CIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.8 | ColumncmTrafficPortQosShaperCIRHi | read-create | current | This object specifies the Higher 32 bits of CIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.9 | ColumncmTrafficPortQosShaperEIRLo | read-create | current | This object specifies the Lower 32 bits of EIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.10 | ColumncmTrafficPortQosShaperEIRHi | read-create | current | This object specifies the Higher 32 bits of EIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.11 | ColumncmTrafficPortQosShaperStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.12 | ColumncmTrafficPortQosShaperRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.13 | ColumncmTrafficPortQosShaperIngressAverageFrameSize | read-create | current | This object defines the average frame size for accounting for Meter/Shaping. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.14 | ColumncmTrafficPortQosShaperAdditionalCIRLo | read-create | current | This object specifies the Lower 32 bits of additional CIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.43.1.15 | ColumncmTrafficPortQosShaperAdditionalCIRHi | read-create | current | This object specifies the Higher 32 bits of additional CIR. |
| 1.3.6.1.4.1.2544.1.12.4.1.44 | ScalarcmTrafficAclRscAllocation | read-write | current | This object is defined to set traffic acl resource allocation. Supported actions are: all-bk-l2(1) - all bank allocated to l2. all-bk-l2-ipv4(2) - all bank all… |
| 1.3.6.1.4.1.2544.1.12.4.1.45 | Tablef3NetPortQosShaperTable | not-accessible | current | A list of entries corresponding to Ethernet Network Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Network Po… |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1 | Rowf3NetPortQosShaperEntry | not-accessible | current | A conceptual row in the f3NetPortQosShaperTable. These entries represent a Quality of Service Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.1 | Columnf3NetPortQosShaperIndex | read-create | current | The unique integer index value corresponding to a Quality of Service Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.2 | Columnf3NetPortQosShaperDirection | read-only | current | The direction of the Quality of Service Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.3 | Columnf3NetPortQosShaperAdminState | read-write | current | This object represents the Administrative State of the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.4 | Columnf3NetPortQosShaperOperationalState | read-only | current | This object represents the Operational State of the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.5 | Columnf3NetPortQosShaperSecondaryState | read-only | current | This object represents the Secondary State of the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.6 | Columnf3NetPortQosShaperCIRLo | read-create | current | This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.7 | Columnf3NetPortQosShaperCIRHi | read-create | current | This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.8 | Columnf3NetPortQosShaperEIRLo | read-create | current | This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.9 | Columnf3NetPortQosShaperEIRHi | read-create | current | This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.10 | Columnf3NetPortQosShaperCBS | read-create | current | This object represents the Commited Burst Size (CBS) of the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.11 | Columnf3NetPortQosShaperEBS | read-create | current | This object represents the Excess Burst Size (EBS) of the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.12 | Columnf3NetPortQosShaperBufferSize | read-create | current | This object represents the Buffer Size of the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.13 | Columnf3NetPortQosShaperCOS | read-only | current | This object provides the COS (Class of Service) value for the QOS Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.14 | Columnf3NetPortQosShaperSoamCIRLo | read-create | current | This object represents the Soam Commited Information Rate(SOAM-CIR) (Lower 32 bits)of a Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.15 | Columnf3NetPortQosShaperSoamCIRHi | read-create | current | This object represents the Soam Commited Information Rate(SOAM-CIR) (Higher 32 bits) of a Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.16 | Columnf3NetPortQosShaperSoamEIRLo | read-create | current | This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.17 | Columnf3NetPortQosShaperSoamEIRHi | read-create | current | This object represents the Soam Excess Information Rate(SOAM-EIR) (Higher 32 bits) on the Shaper. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.18 | Columnf3NetPortQosShaperWredGreenMinQueueThreshold | read-create | current | This object represents the Wred green packet min queue threshold value. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.19 | Columnf3NetPortQosShaperWredGreenMaxQueueThreshold | read-create | current | This object represents the Wred green packet max queue threshold value. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.20 | Columnf3NetPortQosShaperWredGreenDropProbability | read-create | current | This object represents the Wred green packet drop probability. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.21 | Columnf3NetPortQosShaperWredYellowMinQueueThreshold | read-create | current | This object represents the Wred yellow packet min queue threshold value. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.22 | Columnf3NetPortQosShaperWredYellowMaxQueueThreshold | read-create | current | This object represents the Wred yellow packet max queue threshold value. |
| 1.3.6.1.4.1.2544.1.12.4.1.45.1.23 | Columnf3NetPortQosShaperWredYellowDropProbability | read-create | current | This object represents the Wred yellow packet drop probability. |
| 1.3.6.1.4.1.2544.1.12.4.1.46 | Tablef3Usb3GDCNPortTable | not-accessible | current | 3G DCN Port table. The table contains parameters of 3G USB modem. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1 | Rowf3Usb3GDCNPortEntry | not-accessible | current | A conceptual row in the f3Usb3GDCNPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.1 | Columnf3Usb3GDCNPortIndex | read-only | current | An integer index value used to uniquely identify this Ethernet Access Port within a card. Note that each Ethernet Access Port is uniquely identified by the ind… |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.2 | Columnf3Usb3GDCNPortIfIndex | read-only | current | This object has the same value as ifIndex for G3 DCN Port. An integer index value used to uniquely identify this G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.3 | Columnf3Usb3GDCNPortEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.4 | Columnf3Usb3GDCNPortAdminState | read-write | current | This object represents the Administrative State of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.5 | Columnf3Usb3GDCNPortOperationalState | read-only | current | This object represents the Operational State of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.6 | Columnf3Usb3GDCNPortSecondaryState | read-only | current | This object represents the Secondary State of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.7 | Columnf3Usb3GDCNPortVendorName | read-only | current | This object provides the Vendor Name of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.8 | Columnf3Usb3GDCNPortModel | read-only | current | This object provides the Model of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.9 | Columnf3Usb3GDCNPortFSN | read-only | current | This object provides the Factory Serial Number of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.10 | Columnf3Usb3GDCNPortIMEI | read-only | current | This object provides the International Mobile Equipment Identity of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.11 | Columnf3Usb3GDCNPortHardwareVersion | read-only | current | This object provides the Hardware Version of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.12 | Columnf3Usb3GDCNPortFirmwareVersion | read-only | current | This object provides the Firmware Version of the G3 DCN Port.. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.13 | Columnf3Usb3GDCNPortSIMStatus | read-only | current | This object provides the SIM card Status of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.14 | Columnf3Usb3GDCNPortPINLeftChances | read-only | current | This object provides the Left Chances for PIN input of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.15 | Columnf3Usb3GDCNPortPUKLeftChances | read-only | current | This object provides the Left Chances for PUK input of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.16 | Columnf3Usb3GDCNPortConnectionStatus | read-only | current | This object provides the Wirless Connection Status of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.17 | Columnf3Usb3GDCNPortRSSI | read-only | current | This object provides the Received Signal Strength Indication of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.18 | Columnf3Usb3GDCNPortSpeed | read-only | current | This object provides the Connection Speed of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.19 | Columnf3Usb3GDCNPortMTU | read-only | current | This object provides the MTU of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.20 | Columnf3Usb3GDCNPortProviderName | read-only | current | This object provides the Wireless Service Provider Name of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.21 | Columnf3Usb3GDCNPortDNS1 | read-only | current | This first DNS of the interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.22 | Columnf3Usb3GDCNPortDNS2 | read-only | current | This second DNS of the interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.23 | Columnf3Usb3GDCNPortAPN | read-write | current | This object allows configure the Access Point Name of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.24 | Columnf3Usb3GDCNPortUserName | read-write | current | This object allows configure the User Name of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.25 | Columnf3Usb3GDCNPortPassword | read-write | current | This object allows configure the Password of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.26 | Columnf3Usb3GDCNPortDailNumber | read-write | current | This object allows configure the Dail Number of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.27 | Columnf3Usb3GDCNPortRedialTimer | read-write | current | This object allows configure the Retail Timer of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.28 | Columnf3Usb3GDCNPortCurrentPinCode | read-create | current | This object is the Current Pin Code. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.29 | Columnf3Usb3GDCNPortNewPinCode | read-create | current | This object is the New Pin code. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.30 | Columnf3Usb3GDCNPortConfirmPinCode | read-create | current | This object is the Confirm Pin Code. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.31 | Columnf3Usb3GDCNPortCurrentPukCode | read-create | current | This object is the Current Puk Code. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.32 | Columnf3Usb3GDCNPINCodeAction | read-create | current | This Action is for PIN code operation. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.33 | Columnf3Usb3GDCNPortStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.34 | Columnf3Usb3GDCNPortRowStatus | read-write | current | The status of this row. The f3Usb3GDCNPortRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or… |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.35 | Columnf3Usb3GDCNPortIMSI | read-only | current | This object provides the International Mobile Subscriber Identity of the G3 DCN Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.36 | Columnf3Usb3GDCNPortPINStatus | read-only | current | This status of PIN/PUK |
| 1.3.6.1.4.1.2544.1.12.4.1.46.1.37 | Columnf3UsbDCNPortMobileNetworkType | read-only | current | This object describe the mobile network type. |
| 1.3.6.1.4.1.2544.1.12.4.1.47 | TableocnStmTable | not-accessible | current | A list of entries corresponding to OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1 | RowocnStmEntry | not-accessible | current | A conceptual row in the ocnStmTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.1 | ColumnocnStmIndex | not-accessible | current | Unique index value associated with the OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.2 | ColumnocnStmIfIndex | read-only | current | This object has the same value as ifIndex for OCn/STM interface. An integer index value used to uniquely identify this OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.3 | ColumnocnStmEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.4 | ColumnocnStmAdminState | read-write | current | This object represents the Administrative State of the OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.5 | ColumnocnStmOperationalState | read-only | current | This object represents the Operational State of the OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.6 | ColumnocnStmSecondaryState | read-only | current | This object represents the Secondary State of the OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.7 | ColumnocnStmSfpVendorName | read-only | current | This object provides the vendor name of the SFP. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.8 | ColumnocnStmSfpPartNumber | read-only | current | This object provides the part number of the SFP. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.9 | ColumnocnStmSfpSerialNumber | read-only | current | This object provides the serial number of the SFP. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.10 | ColumnocnStmSfpDateOfManufacture | read-only | current | This object provides the date of manufacture of the SFP. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.11 | ColumnocnStmSfpConnectorValue | read-only | current | This object provides the SFP connector value. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.12 | ColumnocnStmSfpLinkLength | read-only | current | This object provides the SFP Link Length. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.13 | ColumnocnStmSfpLaserWaveLength | read-only | current | This object provides the SFP Laser Wave Length in nano meters. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.14 | ColumnocnStmSfpLaserWaveLengthPicometer | read-only | current | This object provide laser wavelength pico value. For example, laser wavelength is 1510.01, then ocnStmSfpLaserWaveLength=1510 and ocnStmSfpLaserWaveLengthPicom… |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.15 | ColumnocnStmSfpMediaType | read-only | current | This object provides the SFP Media Type. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.16 | ColumnocnStmMultiplexingStructures | read-write | current | This object provides the TDM Multiplexing Structure base on OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.17 | ColumnocnStmEoTDMMode | read-write | current | This object provides the TDM Mode base on OCn/STM interface. EoPDH means VCG container is PDH; EoTDM means VCG container is VC of SDH/SONET |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.18 | ColumnocnStmLoopbackConfig | read-write | current | This object allows to initiate loopbacks on on the OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.19 | ColumnocnStmLoopbackStatus | read-only | current | This object provides status of the current loopback on the OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.20 | ColumnocnStmLoopbackTime | read-write | current | This object allows to specify time for timed-loopbacks on on the OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.21 | ColumnocnStmInsertingAIS | read-write | current | This object allows to insert AIS-L out from OCn/STM interface when it is in maintenance state. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.22 | ColumnocnStmBerExcThreshold | read-write | current | This object provide the threshold of B2EXC. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.23 | ColumnocnStmBerDegThreshold | read-write | current | This object provides the threshold of B2DEG. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.24 | ColumnocnStmRxTrailTrace | read-only | current | This object provides the recevied J0 on the OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.25 | ColumnocnStmTxTrailTrace | read-write | current | This object provides the transmit J0 on the OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.26 | ColumnocnStmExpectedTrailTrace | read-write | current | This object provides the expected J0 on the OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.27 | ColumnocnStmTrailTraceFormat | read-write | current | This object provides the J0 length mode on the OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.28 | ColumnocnStmQLModeEnabled | read-write | current | This object allows to specify whether the OCn/STM interface can be enabled/disabled for QL Mode. This object is only applicable for Synchronous OCn/STM interfa… |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.29 | ColumnocnStmExpectedQL | read-write | current | This object allows to specify the expected QL when the OCn/STM interface is enabled for QL Mode. This object is only applicable for Synchronous OCn/STM interfa… |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.30 | ColumnocnStmAssumedQL | read-write | current | This object allows to specify the assumed QL on the OCn/STM interface. This object is only applicable for Synchronous OCn/STM interface. The Assumed QL is only… |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.31 | ColumnocnStmReceivedQL | read-only | current | This object provides the Received QL value for the OCn/STM interface. If the OCn/STM interface TransmitQL Mode is disabled, then the received QL value is not a… |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.32 | ColumnocnStmTransmitQL | read-only | current | This object provides the Transmitted QL value for the OCn/STM interface. If the OCn/STM interface TransmitQL Mode is disabled, then the received QL value is no… |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.33 | ColumnocnStmPortType | read-only | current | This object represents the OCN/STM Port Type. Determines whether the OCN/STM port operates in OC or STM mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.34 | ColumnocnStmFreqSourceType | read-write | current | This object represents the TDM Frequency source of OCN/STM port. |
| 1.3.6.1.4.1.2544.1.12.4.1.47.1.35 | ColumnocnStmHighOrderPathType | read-write | current | This object provides the High Order Path Type of the OCn/STM interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.48 | TablestsVcPathTable | not-accessible | current | A list of entries corresponding to OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1 | RowstsVcPathEntry | not-accessible | current | A conceptual row in the stsVcPathTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.1 | ColumnstsVcPathParentIfIndex | not-accessible | current | This object is its parent's ifindex. Based on the Multiplexing hierarchy, this object points to the container's interface index. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.2 | ColumnstsVcPathIndex | not-accessible | current | This object is his index. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.3 | ColumnstsVcPathIfIndex | read-only | current | This object has the same value as ifIndex for OCn Path. An integer index value used to uniquely identify this OCn Path interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.4 | ColumnstsVcPathAdminState | read-write | current | This object represents the Administrative State of the OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.5 | ColumnstsVcPathOperationalState | read-only | current | This object represents the Operational State of the OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.6 | ColumnstsVcPathSecondaryState | read-only | current | This object represents the Secondary State of the OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.7 | ColumnstsVcPathLoopbackConfig | read-write | current | This object allows to initiate loopbacks on on the OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.8 | ColumnstsVcPathLoopbackStatus | read-only | current | This object provides status of the current loopback on the OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.9 | ColumnstsVcPathLoopbackTime | read-write | current | This object allows to specify time for timed-loopbacks on on the OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.10 | ColumnstsVcPathInsertingAIS | read-write | current | This object allows to insert AIS-P out from OCn Path when it is in maintenance state. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.11 | ColumnstsVcPathBerExcThreshold | read-write | current | This object provide the threshold of B3EXC. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.12 | ColumnstsVcPathBerDegThreshold | read-write | current | This object provides the threshold of B3DEG. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.13 | ColumnstsVcPathTrailTraceFormat | read-write | current | This object provides the J1 length mode on the OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.14 | ColumnstsVcPathRxTrailTrace | read-only | current | This object provides the recevied J1 on the OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.15 | ColumnstsVcPathTxTrailTrace | read-write | current | This object provides the transmit J1 on the OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.16 | ColumnstsVcPathExpectedTrailTrace | read-write | current | This object provides the expected J1 on the OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.17 | ColumnstsVcPathRxSignalLabel | read-only | current | This object provides the recevied C2 on the OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.18 | ColumnstsVcPathTxSignalLabel | read-write | current | This object provides the transmit C2 on the OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.19 | ColumnstsVcPathExpectedSignalLabel | read-write | current | This object provides the expected C2 on the OCn Path. |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.20 | ColumnstsVcPathRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.48.1.21 | ColumnstsVcPathLowOrderPathType | read-write | current | This object provides the low Order Path Type of the sts vc interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.49 | TablevtVcPathTable | not-accessible | current | A list of entries corresponding to VT1.5/VC12. These represent the lower order path (LOP) entities. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1 | RowvtVcPathEntry | not-accessible | current | A conceptual row in the vtVcPathTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.1 | ColumnvtVcPathParentIfIndex | not-accessible | current | This object is its parent's ifindex. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.2 | ColumnvtVcPathIndex | not-accessible | current | This object represents the unique number of the Path within the parent container represented by vtvcPathParentIfIndex. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.3 | ColumnvtVcPathIfIndex | read-only | current | This object has the same value as ifIndex for OCn VT1.5/VC12. An integer index value used to uniquely identify this OCn VT1.5/VC12 interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.4 | ColumnvtVcPathAdminState | read-write | current | This object represents the Administrative State of the OCn VT1.5/VC12. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.5 | ColumnvtVcPathOperationalState | read-only | current | This object represents the Operational State of the OCn VT1.5/VC12. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.6 | ColumnvtVcPathSecondaryState | read-only | current | This object represents the Secondary State of the OCn VT1.5/VC12. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.7 | ColumnvtVcPathLoopbackConfig | read-write | current | This object allows to initiate loopbacks on on the OCn VT1.5/VC12. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.8 | ColumnvtVcPathLoopbackStatus | read-only | current | This object provides status of the current loopback on the OCn VT1.5/VC12. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.9 | ColumnvtVcPathLoopbackTime | read-write | current | This object allows to specify time for timed-loopbacks on on the OCn VT1.5/VC12. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.10 | ColumnvtVcPathInsertingAIS | read-write | current | This object allows to insert AIS-P out from OCn VT1.5/VC12 when it is in maintenance state. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.11 | ColumnvtVcPathBerExcThreshold | read-write | current | This object provide the threshold of BEREXC. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.12 | ColumnvtVcPathBerDegThreshold | read-write | current | This object provides the threshold of BERDEG. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.13 | ColumnvtVcPathTrailTraceFormat | read-only | current | This object provides the J2 length mode on the OCn VT1.5/VC12. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.14 | ColumnvtVcPathRxTrailTrace | read-only | current | This object provides the recevied J2 on the OCn VT1.5/VC12. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.15 | ColumnvtVcPathTxTrailTrace | read-write | current | This object provides the transmit J2 on the OCn VT1.5/VC12. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.16 | ColumnvtVcPathExpectedTrailTrace | read-write | current | This object provides the expected J2 on the OCn VT1.5/VC12. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.17 | ColumnvtVcPathRxSignalLabel | read-only | current | This object provides the recevied V5 byte(b5-b7) on the OCn VT1.5/VC12. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.18 | ColumnvtVcPathTxSignalLabel | read-write | current | This object provides the transmit V5 byte(b5-b7) on the OCn VT1.5/VC12. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.19 | ColumnvtVcPathExpectedSignalLabel | read-write | current | This object provides the expected V5 byte(b5-b7) on the OCn VT1.5/VC12. |
| 1.3.6.1.4.1.2544.1.12.4.1.49.1.20 | ColumnvtVcPathRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.50 | Tablee1t1Table | not-accessible | current | A list of entries corresponding to E1/T1. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1 | Rowe1t1Entry | not-accessible | current | A conceptual row in the e1t1Table. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.1 | Columne1t1ParentIfIndex | not-accessible | current | This object represents the parent (container) object's interface index. In the case when parent of E1T1Entry does not have a InterfaceIndex then the e1t1Parent… |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.2 | Columne1t1Index | not-accessible | current | Index value used to uniquely identify this E1/T1 interface, within the parent container specified by e1t1ParentIfIndex. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.3 | Columne1t1IfIndex | read-only | current | This object has the same value as ifIndex for E1/T1. An integer index value used to uniquely identify this E1/T1 interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.4 | Columne1t1EntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.5 | Columne1t1AdminState | read-write | current | This object represents the Administrative State of the E1/T1. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.6 | Columne1t1OperationalState | read-only | current | This object represents the Operational State of the E1/T1. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.7 | Columne1t1SecondaryState | read-only | current | This object represents the Secondary State of the E1/T1. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.8 | Columne1t1LoopbackConfig | read-write | current | This object allows to initiate loopbacks on on the E1/T1. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.9 | Columne1t1LoopbackStatus | read-only | current | This object provides status of the current loopback on the E1/T1. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.10 | Columne1t1LoopbackTime | read-write | current | This object allows to specify time for timed-loopbacks on on the E1/T1. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.11 | Columne1t1RemoteLoopbackRequest | read-write | current | This object allows to specify to repond the remote loopback request or not. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.12 | Columne1t1InsertingAIS | read-write | current | This object allows to insert AIS out from E1/T1 when it is in maintenance state. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.13 | Columne1t1RowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.14 | Columne1t1LineType | read-only | current | This object represents the E1/T1 Line Type. Determines whether the E1/T1 interface operates in T1 or E1 mode. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.15 | Columne1t1LineCode | read-write | current | This object represents the E1/T1 Port Line Code. When the port is configured for a Line Type of T1, the valid values are t1-b8zs and t1-ami and the default val… |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.16 | Columne1t1FrameFormat | read-write | current | This object represents the E1/T1 Port Frame Format. When the port is configured for a Line Type of T1, the valid values are t1-sf, t1-esf and t1-unframed and t… |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.17 | Columne1t1LineBuildOut | read-write | current | This object represents Line Build Out on E1/T1 port. |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.18 | Columne1t1TimingDomain | read-write | current | This object represents Timing Domain that the E1/T1 interface uses as timing source. The Timing Domain is a Synchronization Entity represented by an object in … |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.19 | Columne1t1RcvSensitivity | read-write | current | This object allows configuring the reciever sensitivity based on expected signal strength |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.20 | Columne1t1IdlePatternProfile | read-write | current | This object allows selecting Idle Pattern Profile for the E1/T1 interface. Idle Patter Profile is represented by an object in the f3Pwe3IdlePatternProfileTable |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.21 | Columne1t1LoopbackProfile | read-write | current | This object allows selecting Loopback Profile for the E1/T1 interface. Loopback Profile is represented by an object in the f3Pwe3LoopbackProfileTable |
| 1.3.6.1.4.1.2544.1.12.4.1.50.1.22 | Columne1t1RelatedContainerId | read-only | current | This object describes the related container VCG. |
| 1.3.6.1.4.1.2544.1.12.4.1.51 | Tablee3t3Table | not-accessible | current | A list of entries corresponding to E3/T3. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1 | Rowe3t3Entry | not-accessible | current | A conceptual row in the e3t3Table. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.1 | Columne3t3ParentIfIndex | not-accessible | current | This object is its parent's ifindex. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.2 | Columne3t3Index | not-accessible | current | This object is his index. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.3 | Columne3t3IfIndex | read-only | current | This object has the same value as ifIndex for E3/T3. An integer index value used to uniquely identify this E3/T3 interface. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.4 | Columne3t3EntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.5 | Columne3t3AdminState | read-write | current | This object represents the Administrative State of the E3/T3. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.6 | Columne3t3OperationalState | read-only | current | This object represents the Operational State of the E3/T3. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.7 | Columne3t3SecondaryState | read-only | current | This object represents the Secondary State of the E3/T3. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.8 | Columne3t3LoopbackConfig | read-write | current | This object allows to initiate loopbacks on on the E3/T3. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.9 | Columne3t3LoopbackStatus | read-only | current | This object provides status of the current loopback on the E3/T3. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.10 | Columne3t3LoopbackTime | read-write | current | This object allows to specify time for timed-loopbacks on on the E3/T3. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.11 | Columne3t3RemoteLoopbackRequest | read-write | current | This object allows to specify to repond the remote loopback request or not. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.12 | Columne3t3InsertingAIS | read-write | current | This object allows to insert AIS out from E3/T3 when it is in maintenance state. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.13 | Columne3t3CBitEnable | read-write | current | The object provides whether C-Bit Parity is enabled/disabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.14 | Columne3t3T3Channelized | read-write | current | The object provides whether the T3 tunnel is channlized with T1. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.15 | Columne3t3RowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.16 | Columne3t3FrameFormat | read-write | current | This object represents the Frame Format of the E3/T3. |
| 1.3.6.1.4.1.2544.1.12.4.1.51.1.17 | Columne3t3RelatedContainerId | read-only | current | This object describe the related contained VCG. |
| 1.3.6.1.4.1.2544.1.12.4.1.52 | TablecmEthernetTrafficPortExtTable | not-accessible | current | A list of entries corresponding to Ethernet Facilities for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.52.1 | RowcmEthernetTrafficPortExtEntry | not-accessible | current | A conceptual row in the cmEthernetTrafficPortExtTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.52.1.1 | ColumncmEthernetTrafficPortTDMEncapsulation | read-write | current | This object describes the GFP Encapsulation type of the traffic port. |
| 1.3.6.1.4.1.2544.1.12.4.1.52.1.2 | ColumncmEthernetTrafficPortRelatedVCG | read-only | current | This object describes the related VCG of the traffic port. |
| 1.3.6.1.4.1.2544.1.12.4.1.53 | Tablef3PulsePerSecondPortTable | not-accessible | current | A list of entries corresponding to Pulse Per Second Port Facilities. |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1 | Rowf3PulsePerSecondPortEntry | not-accessible | current | A conceptual row in the f3PulsePerSecondPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.1 | Columnf3PulsePerSecondPortIndex | not-accessible | current | An integer index value used to uniquely identify this Pulse Per Second Port within the card. |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.2 | Columnf3PulsePerSecondPortIfIndex | read-only | current | This object has the same value as ifIndex for Pulse Per Second Port. An integer index value used to uniquely identify this Pulse Per Second Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.3 | Columnf3PulsePerSecondPortEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.4 | Columnf3PulsePerSecondPortAdminState | read-write | current | This object represents the Administrative State of the Pulse Per Second Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.5 | Columnf3PulsePerSecondPortOperationalState | read-only | current | This object represents the Operational State of the Pulse Per Second Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.6 | Columnf3PulsePerSecondPortSecondaryState | read-only | current | This object represents the Secondary State of the Pulse Per Second Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.7 | Columnf3PulsePerSecondPortSquelchControl | read-write | current | This object allows to set the Squelch Control for the Pulse Per Second port. The Squelch Control is used to determine the type of squelch control used to squel… |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.8 | Columnf3PulsePerSecondPortSquelchQL | read-write | current | This object allows to set the Squelch QL for the Pulse Per Second port. This value is used when f3PulsePerSecondPortSquelchControl is squelch-ql. The Squelch Q… |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.9 | Columnf3PulsePerSecondPortTODSource | read-write | current | This object allows to set the Pulse Per Second Source for the Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.10 | Columnf3PulsePerSecondPortDirection | read-write | current | This object allows specification of the signal type (i.e. input or output). |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.11 | Columnf3PulsePerSecondPortInputRate | read-write | current | This object allows specification of the PPS Input Rate. |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.12 | Columnf3PulsePerSecondPortDelayCompensation | read-write | current | This object allows specification of the PPS external Delay Compensation in nanoseconds. The valid values are 0 to 96 in 8 nanoseconds steps. Values which are n… |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.13 | Columnf3PulsePerSecondPortClockClass | read-only | deprecated | This object specify PPS port clock class. |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.14 | Columnf3PulsePerSecondPortClockAccuracy | read-only | deprecated | This object specify PPS port clock accuracy. |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.15 | Columnf3PulsePerSecondPortTimeSource | read-only | deprecated | This object specify PPS port time source. |
| 1.3.6.1.4.1.2544.1.12.4.1.53.1.16 | Columnf3PulsePerSecondPortPhyInterfaceType | read-write | current | This object specify PPS physical interface type. |
| 1.3.6.1.4.1.2544.1.12.4.1.55 | Tablef3TimeOfDayPortTable | not-accessible | current | A list of entries corresponding to Time Of Day Port Facilities. |
| 1.3.6.1.4.1.2544.1.12.4.1.55.1 | Rowf3TimeOfDayPortEntry | not-accessible | current | A conceptual row in the f3TimeOfDayPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.55.1.1 | Columnf3TimeOfDayPortIndex | not-accessible | current | An integer index value used to uniquely identify this Time Of Day Port within the card. |
| 1.3.6.1.4.1.2544.1.12.4.1.55.1.2 | Columnf3TimeOfDayPortIfIndex | read-only | current | This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this Time Of Day Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.55.1.3 | Columnf3TimeOfDayPortEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.55.1.4 | Columnf3TimeOfDayPortAdminState | read-write | current | This object represents the Administrative State of the Time Of Day Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.55.1.5 | Columnf3TimeOfDayPortOperationalState | read-only | current | This object represents the Operational State of the Time Of Day Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.55.1.6 | Columnf3TimeOfDayPortSecondaryState | read-only | current | This object represents the Secondary State of the Time Of Day Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.55.1.7 | Columnf3TimeOfDayPortSquelchControl | read-write | current | This object allows to set the Squelch Control for the Time Of Day port. The Squelch Control is used to determine the type of squelch control used to squelch th… |
| 1.3.6.1.4.1.2544.1.12.4.1.55.1.8 | Columnf3TimeOfDayPortSquelchQL | read-write | current | This object allows to set the Squelch QL for the Time Of Day port. This value is used when f3TimeOfDayPortSquelchControl is squelch-ql. The Squelch QL is used … |
| 1.3.6.1.4.1.2544.1.12.4.1.55.1.9 | Columnf3TimeOfDayPortTODSource | read-write | current | This object allows to set the Time Of Day Source for the Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.56 | TablecmEthernetNetPortExtTable | not-accessible | current | A list of entries corresponding to Ethernet Network Port Facilities for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.56.1 | RowcmEthernetNetPortExtEntry | not-accessible | current | A conceptual row in the cmEthernetNetPortExtTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.56.1.1 | ColumncmEthernetNetPortTDMEncapsulation | read-write | current | This object describes the GFP Encapsulation type of the TDM network port. |
| 1.3.6.1.4.1.2544.1.12.4.1.56.1.2 | ColumncmEthernetNetPortAssociatedTdmEntity | read-write | current | This object describes the associated working path of TDM network port. |
| 1.3.6.1.4.1.2544.1.12.4.1.56.1.3 | ColumncmEthernetNetPortInsertingAIS | read-write | current | This object allows to insert AIS out from TDM network port when it is in maintenance state. |
| 1.3.6.1.4.1.2544.1.12.4.1.57 | Tablef3GPSReceiverPortTable | not-accessible | current | A list of entries corresponding to the GPS Receiver Port Facilities. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1 | Rowf3GPSReceiverPortEntry | not-accessible | current | A conceptual row in the f3GPSReceiverPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.1 | Columnf3GPSReceiverPortIndex | not-accessible | current | An integer index value used to uniquely identify this GPS Receiver Port within the card. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.2 | Columnf3GPSReceiverPortIfIndex | read-only | current | This object has the same value as ifIndex for Time Of Day Port. An integer index value used to uniquely identify this GPS Receiver Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.3 | Columnf3GPSReceiverPortEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.4 | Columnf3GPSReceiverPortAdminState | read-write | current | This object represents the Administrative State of the GPS Receiver Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.5 | Columnf3GPSReceiverPortOperationalState | read-only | current | This object represents the Operational State of the GPS Receiver Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.6 | Columnf3GPSReceiverPortSecondaryState | read-only | current | This object represents the Secondary State of the GPS Receiver Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.7 | Columnf3GPSReceiverPortPPSGenCondition | read-write | current | This object allows for configuration of the PPS generation condition. PPS is generated when at least one satellite is tracked or when at least three satellites… |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.8 | Columnf3GPSReceiverPortAntennaCableLength | read-write | current | This object allows for configuration of the GPS Antenna cable length in meters. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.9 | Columnf3GPSReceiverPortAntennaStatus | read-only | current | This object provides the GPS Receiver Port Antenna status. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.10 | Columnf3GPSReceiverPortSatellitesUsableFlag | read-only | current | This object provides information on whether the satellites are usable. It is set to TRUE, when ephemeris and health data for at least one satellite is availabl… |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.11 | Columnf3GPSReceiverPortNumTrackingSatellites | read-only | current | This object provides information on the number of tracking satellites. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.12 | Columnf3GPSReceiverPortSelfSurveyProgress | read-only | current | This object provides information on the percentage of fixes collected so far. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.13 | Columnf3GPSReceiverPortPPSGeneratedFlag | read-only | current | This object indicates whether there are enough usable satellites to provide accurate PPS output. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.14 | Columnf3GPSReceiverPortGnssSystem | read-write | current | This object configure Constellation Type of the GPS Antenna. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.15 | Columnf3GPSReceiverPortInstallationType | read-write | current | This object configure Installation Type of the GPS Antenna. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.16 | Columnf3GPSReceiverPortGnssTOD | read-only | current | This object provides the last time was executed. |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.17 | Columnf3GPSReceiverPortGnssSystemsBitMap | read-write | current | this object configures GNSS constellation types supported by a GNSS Receiver Port |
| 1.3.6.1.4.1.2544.1.12.4.1.57.1.18 | Columnf3GPSReceiverPortAlias | read-create | current | This object provides an alias to the GPS port |
| 1.3.6.1.4.1.2544.1.12.4.1.58 | TablecmPethPsePortExtTable | not-accessible | current | A list of entries corresponding to PsePortExtEntry. |
| 1.3.6.1.4.1.2544.1.12.4.1.58.1 | RowcmPethPsePortExtEntry | not-accessible | current | A conceptual row in the cmPethPsePortExtEntry. |
| 1.3.6.1.4.1.2544.1.12.4.1.58.1.1 | ColumncmPethPsePortExtGroupIndex | not-accessible | current | This object has the same value with the group index in pethPsePortTalbe. |
| 1.3.6.1.4.1.2544.1.12.4.1.58.1.2 | ColumncmPethPsePortExtIndex | not-accessible | current | This object has the same value with the port index in pethPsePortTalbe. |
| 1.3.6.1.4.1.2544.1.12.4.1.58.1.3 | ColumncmPethPsePortExtAssociatedPort | read-write | current | This object means the oid of associated physical port. |
| 1.3.6.1.4.1.2544.1.12.4.1.58.1.4 | ColumnpethPsePortExtPowerConsumption | read-only | current | This object means the power consumption of each port in mWatts. |
| 1.3.6.1.4.1.2544.1.12.4.1.58.1.5 | ColumnpethPsePortExtAvailablePowerLevel | read-write | current | This object means the pse port available power level. |
| 1.3.6.1.4.1.2544.1.12.4.1.59 | TablepethMainPseEXTTable | not-accessible | current | A list of entries corresponding to PethMainPseEXTEntry. |
| 1.3.6.1.4.1.2544.1.12.4.1.59.1 | RowpethMainPseEXTEntry | not-accessible | current | A conceptual row in the pethMainPseEXTEntry. |
| 1.3.6.1.4.1.2544.1.12.4.1.59.1.1 | ColumnpethMainPseExtGroupIndex | not-accessible | current | This object has the same value with the group index in pethMainPseEXTTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.59.1.2 | ColumnpethMainPseExtNonStandardPD | read-write | current | disabled: don't support non-standard PD, enabled: support non-standard PD |
| 1.3.6.1.4.1.2544.1.12.4.1.60 | TablecmMPFlowTable | not-accessible | current | A list of entries corresponding to MPFlow. |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1 | RowcmMPFlowEntry | not-accessible | current | A conceptual row in the cmMPFlowTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1.1 | ColumncmMPFlowIndex | not-accessible | current | An integer index value used to uniquely identify this MultiPointFlow. |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1.2 | ColumncmMPFlowCircuitName | read-write | current | This object allows SNMP management entities to provide a circuit identifier with the MPFlow. |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1.3 | ColumncmMPFlowAdminState | read-write | current | This object represents the Administrative State of the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1.4 | ColumncmMPFlowOperationalState | read-only | current | This object represents the Operational State of the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1.5 | ColumncmMPFlowSecondaryState | read-only | current | This object represents the Secondary State of the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1.6 | ColumncmMPFlowLearningEnabled | read-write | current | DISABLED: The forwarding function of the Flow does not dynamically learn MAC address to flowpoint mapping. ENABLED: The forwarding function of the Flow dynamic… |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1.7 | ColumncmMPFlowAgingTimer | read-write | current | MAC Table Entry will be removed from the forwarding table after an inactivity time represented by this entry. Not used in EG-X. |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1.8 | ColumncmMPFlowFwdTableSizeProfileID | read-write | current | Profile ID for Maximum number of MAC Table Entries for the flow |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1.9 | ColumncmMPFlowtableFullAction | read-write | current | Action on ingress frames when the number of MAC Table entires has reached the maximum defined by tableSize. BLOCK: A frame with a Source MAC address not in the… |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1.10 | ColumncmMPFlowStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1.11 | ColumncmMPFlowRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1.12 | ColumncmMPFlowLearningConfigAction | read-write | current | This objects allows performing user action on Learning Table. |
| 1.3.6.1.4.1.2544.1.12.4.1.60.1.13 | ColumncmMPFlowFPList | read-write | current | This object only used to display trap and Flow point list. Fp will be add in the cmMPFlowMemberTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.61 | TablecmMPFlowMemberTable | not-accessible | current | A list of entries corresponding to MPFlowMember. |
| 1.3.6.1.4.1.2544.1.12.4.1.61.1 | RowcmMPFlowMemberEntry | not-accessible | current | A conceptual row in the cmMPFlowMemberTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.61.1.1 | ColumncmMPFlowMemberFPIndex | not-accessible | current | This object describes the relate Flow point. |
| 1.3.6.1.4.1.2544.1.12.4.1.61.1.2 | ColumncmMPFlowPointRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.62 | TablecmEthernetTrafficPortPcpDEEncTable | not-accessible | current | EthernetTraffic Port PCP drop eligibility encoding table. This is applied to a frame that is egressing at the EthernetTraffic port. |
| 1.3.6.1.4.1.2544.1.12.4.1.62.1 | RowcmEthernetTrafficPortPcpDEEncEntry | not-accessible | current | A conceptual row in the ethernetPBPcpDEEncPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.62.1.1 | ColumncmEthernetTrafficPortPcpDEEncIndex | read-only | current | An integer index value used to uniquely identify a row in the PCP drop eligible encoding table. |
| 1.3.6.1.4.1.2544.1.12.4.1.62.1.2 | ColumncmEthernetTrafficPortPcpDEEncInPriority | read-write | current | This object is the input priority that is translated to a drop eligibility priority or a drop ineligibility priority. |
| 1.3.6.1.4.1.2544.1.12.4.1.62.1.3 | ColumncmEthernetTrafficPortPcpDEEncDropIneligiblePrio | read-write | current | This object is the PCP value that has a priority value with implicit drop ineligibility encoded into it. |
| 1.3.6.1.4.1.2544.1.12.4.1.62.1.4 | ColumncmEthernetTrafficPortPcpDEEncDropEligiblePrio | read-write | current | This object is the PCP value that has a priority value with implicit drop eligibility encoded into it. |
| 1.3.6.1.4.1.2544.1.12.4.1.63 | TablecmEthernetTrafficPortPcpDEDecTable | not-accessible | current | EthernetTraffic Port PCP drop eligibility decoding table. This is applied to a frame that is ingressing at a port. |
| 1.3.6.1.4.1.2544.1.12.4.1.63.1 | RowcmEthernetTrafficPortPcpDEDecEntry | not-accessible | current | A conceptual row in the ethernetPBPcpDEDecPortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.63.1.1 | ColumncmEthernetTrafficPortPcpDEDecIndex | read-only | current | An integer index value used to uniquely identify a row in the PCP drop eligible decoding table. |
| 1.3.6.1.4.1.2544.1.12.4.1.63.1.2 | ColumncmEthernetTrafficPortPcpDEDecInPriority | read-write | current | This object is the input priority that is decoded to get priority and the drop eligibility of a frame. |
| 1.3.6.1.4.1.2544.1.12.4.1.63.1.3 | ColumncmEthernetTrafficPortPcpDEDecOutPriority | read-write | current | This object is the priority value decoded from a incoming PCP value. |
| 1.3.6.1.4.1.2544.1.12.4.1.63.1.4 | ColumncmEthernetTrafficPortPcpDEDecDropEligible | read-write | current | This object is the drop eligibility decoded from a incoming PCP value. |
| 1.3.6.1.4.1.2544.1.12.4.1.64 | TablecmEthernetTrafficPortPcpDEPairTable | not-accessible | current | EthernetTraffic Port PCP drop eligibility priority pair table. The priority pair is encoded to same drop eligibility and drop ineligibility priority. Depending… |
| 1.3.6.1.4.1.2544.1.12.4.1.64.1 | RowcmEthernetTrafficPortPcpDEPairEntry | not-accessible | current | A conceptual row in the cmAccPortPcpDEPairEntry. |
| 1.3.6.1.4.1.2544.1.12.4.1.64.1.1 | ColumncmEthernetTrafficPortPcpDEPairIndex | read-only | current | An integer index value used to uniquely identify a row in the PCP drop eligible priority pair table. |
| 1.3.6.1.4.1.2544.1.12.4.1.64.1.2 | ColumncmEthernetTrafficPortPcpDEDropIneligiblePrio | read-write | current | This object is the drop ineligible priority. |
| 1.3.6.1.4.1.2544.1.12.4.1.64.1.3 | ColumncmEthernetTrafficPortPcpDEDropEligiblePrio | read-write | current | This object is the drop eligible priority. |
| 1.3.6.1.4.1.2544.1.12.4.1.65 | TablecmEthernetTrafficPortClbTable | not-accessible | current | A list of entries corresponding to Ethernet Traffic Port Cable Length Benchmark. |
| 1.3.6.1.4.1.2544.1.12.4.1.65.1 | RowcmEthernetTrafficPortClbEntry | not-accessible | current | A conceptual row in the cmEthernetTrafficPortClbTable. These entries represent Cable Length Benchmarks on the Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.65.1.1 | ColumncmEthernetTrafficPortClbIndex | read-only | current | An integer index value used to uniquely identify this Cable Length Benchmark Entry specification. |
| 1.3.6.1.4.1.2544.1.12.4.1.65.1.2 | ColumncmEthernetTrafficPortClbEnabled | read-write | current | This enables specification of Cable Length Benchmark entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.65.1.3 | ColumncmEthernetTrafficPortClbLength | read-write | current | Cable length of Cable Points Entry. The cable length is of the form XXX[.YY] where XX can be any integer value and YY allows precision of 2 decimals after the … |
| 1.3.6.1.4.1.2544.1.12.4.1.65.1.4 | ColumncmEthernetTrafficPortClbDescr | read-write | current | A textual string containing description of cable span. |
| 1.3.6.1.4.1.2544.1.12.4.1.66 | TablenetworkElementTMParamsTable | not-accessible | current | Entries may be auto discovered, or can be explicitly created by SNMP Manager. Each remotely discovered shelf is represented as a row in this table. |
| 1.3.6.1.4.1.2544.1.12.4.1.66.1 | RownetworkElementTMParamsEntry | not-accessible | current | A conceptual row in the networkElementTMParamsTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.66.1.1 | ColumnneTMParamsBandwidthProfileMode | read-create | current | A Network Element level Bandwidth Profile Mode shall be supported which will indicate if the CIR/EIR is interpreted as Information Rate (IR) or Line Rate (LR).… |
| 1.3.6.1.4.1.2544.1.12.4.1.66.1.2 | ColumnneTMParamsAgingtime | read-create | current | The object describe the system aging time. |
| 1.3.6.1.4.1.2544.1.12.4.1.67 | TablecmEthernetAccPortJdsuExtTable | not-accessible | current | A list of entries corresponding to Ethernet Access Port Facilities for JDSU configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.67.1 | RowcmEthernetAccPortJdsuExtEntry | not-accessible | current | A conceptual row in the cmEthernetAccPortJdsuExtTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.67.1.1 | ColumncmEthernetAccPortJDSUControlFramesSnoopingEnabled | read-write | current | Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo re… |
| 1.3.6.1.4.1.2544.1.12.4.1.67.1.2 | ColumncmEthernetAccPortJDSULoopbackVlan | read-only | current | Applicable when port in JDSU VLAN loopback. |
| 1.3.6.1.4.1.2544.1.12.4.1.68 | TablecmEthernetNetPortJdsuExtTable | not-accessible | current | A list of entries corresponding to Ethernet Network Port Facilities for JDSU configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.68.1 | RowcmEthernetNetPortJdsuExtEntry | not-accessible | current | A conceptual row in the cmEthernetNetPortJdsuExtTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.68.1.1 | ColumncmEthernetNetPortJDSUControlFramesSnoopingEnabled | read-write | current | Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo re… |
| 1.3.6.1.4.1.2544.1.12.4.1.68.1.2 | ColumncmEthernetNetPortJDSULoopbackVlan | read-only | current | Applicable when port in JDSU VLAN loopback. |
| 1.3.6.1.4.1.2544.1.12.4.1.69 | TablecmEthernetTrafficPortLpbkTable | not-accessible | current | A list of entries corresponding to Vlan loopback on Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.69.1 | RowcmEthernetTrafficPortLpbkEntry | not-accessible | current | A conceptual row in the cmEthernetTrafficPortLpbkTable. These entries represent Vlan loopback on the Ethernet Traffic Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.69.1.1 | ColumncmEthernetTrafficPortLpbkIndex | not-accessible | current | An integer index value used to uniquely identify this vlan loopback entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.69.1.2 | ColumncmEthernetTrafficPortLpbkInnerVlanEnabled | read-write | current | This object represent the inner vlan whether enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.69.1.3 | ColumncmEthernetTrafficPortLpbkInnerVlanTag | read-write | current | This object represent the inner vlanid value and priority value. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN P… |
| 1.3.6.1.4.1.2544.1.12.4.1.69.1.4 | ColumncmEthernetTrafficPortLpbkOuterVlanEnabled | read-write | current | This object represent the outter vlan whether enabled. |
| 1.3.6.1.4.1.2544.1.12.4.1.69.1.5 | ColumncmEthernetTrafficPortLpbkOuterVlanTag | read-write | current | This object represent the outter vlanid value and priority value. The value to be specified should be in the form X-Y where X is the VLAN Id and Y is the VLAN … |
| 1.3.6.1.4.1.2544.1.12.4.1.69.1.6 | ColumncmEthernetTrafficPortLpbkTime | read-write | current | This object represent the vlan loopback time. |
| 1.3.6.1.4.1.2544.1.12.4.1.69.1.7 | ColumncmEthernetTrafficPortLpbkStatus | read-only | current | This object represent the vlan loopback status. |
| 1.3.6.1.4.1.2544.1.12.4.1.69.1.8 | ColumncmEthernetTrafficPortLpbkConfig | read-write | current | This object represent the vlan loopback action. |
| 1.3.6.1.4.1.2544.1.12.4.1.70 | TablecmPrioMapV2ProfileTable | not-accessible | current | A list of entries corresponding to Ethernet Priority Mappings V2 Profile. |
| 1.3.6.1.4.1.2544.1.12.4.1.70.1 | RowcmPrioMapV2ProfileEntry | not-accessible | current | A conceptual row in the cmPrioMapV2ProfileTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.70.1.1 | ColumncmPrioMapV2ProfileIndex | not-accessible | current | The integer index value describes the profile index. |
| 1.3.6.1.4.1.2544.1.12.4.1.70.1.2 | ColumncmPrioMapV2ProfileAlias | read-write | current | The integer index value describes the profile alias. |
| 1.3.6.1.4.1.2544.1.12.4.1.70.1.3 | ColumncmPrioMapV2ProfileMapModeType | read-write | current | The integer index value describes the profile PriorityMapMode. |
| 1.3.6.1.4.1.2544.1.12.4.1.70.1.4 | ColumncmPrioMapV2ProfileStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.70.1.5 | ColumncmPrioMapV2ProfileRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.70.1.6 | ColumncmPrioMapV2ProfileIngressCosPriority | read-create | deprecated | This object is used to specify whether the profile uses the inner-tag or the outer-tag in determining the COS (Class of Service). |
| 1.3.6.1.4.1.2544.1.12.4.1.70.1.7 | ColumncmPrioMapV2ProfileCosMapModeType | read-write | current | This object is used to specify Cos mapping mode type. |
| 1.3.6.1.4.1.2544.1.12.4.1.70.1.8 | ColumncmPrioMapV2ProfileCosMapControl | read-write | current | This object is used to control whether has cmPrioMapV2PrioMappingCOSTable in profile. |
| 1.3.6.1.4.1.2544.1.12.4.1.70.1.9 | ColumncmPrioMapV2ProfileDefaultCos | read-write | current | This object is used to specify the Default COS to be used when the Ingress Priority Mapping function does not match. |
| 1.3.6.1.4.1.2544.1.12.4.1.71 | TablecmPrioMapV2IngressPrioMappingTable | not-accessible | current | A list of entries corresponding to Ethernet Priority Mappings. |
| 1.3.6.1.4.1.2544.1.12.4.1.71.1 | RowcmPrioMapV2IngressPrioMappingEntry | not-accessible | current | A conceptual row in the cmPrioMapV2IngressPrioMappingTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.71.1.1 | ColumncmPrioMapV2IngressPrioMappingIndex | not-accessible | current | The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of D… |
| 1.3.6.1.4.1.2544.1.12.4.1.71.1.2 | ColumncmPrioMapV2IngressPrioMappingInPriority | read-write | current | The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of D… |
| 1.3.6.1.4.1.2544.1.12.4.1.71.1.3 | ColumncmPrioMapV2IngressPrioMappingCOS | read-write | current | This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.72 | TablecmPrioMapV2PrioMappingCOSTable | not-accessible | current | A list of entries corresponding to Ethernet Priority Mappings. |
| 1.3.6.1.4.1.2544.1.12.4.1.72.1 | RowcmPrioMapV2PrioMappingCOSEntry | not-accessible | current | A conceptual row in the cmPrioMapV2PrioMappingCOSTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.72.1.1 | ColumncmPrioMapV2PrioMappingCOSIndex | not-accessible | current | The index of this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.72.1.2 | ColumncmPrioMapV2PrioMappingCOSValue | read-only | current | This allows specification of the COS Value, i.e. this helps in determining the appropriate COS Policer for the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.72.1.3 | ColumncmPrioMapV2PrioMappingCOSOuterTagPri | read-write | current | This allows specification of the VLAN priority that will replace the outgoing (A2N direction) outer-tag's priority. |
| 1.3.6.1.4.1.2544.1.12.4.1.72.1.4 | ColumncmPrioMapV2PrioMappingCOSInnerTagPri | read-write | current | This allows specification of the VLAN priority that will replace the outgoing (A2N direction) inner-tag's (i.e. second tag) priority. |
| 1.3.6.1.4.1.2544.1.12.4.1.72.1.5 | ColumncmPrioMapV2PrioMappingEncapOuterTagPriority | read-write | current | This object allows configuring encapsulation outer tag priority value of ingress cos mapping. |
| 1.3.6.1.4.1.2544.1.12.4.1.72.1.6 | ColumncmPrioMapV2PrioMappingEncapInnerTagPriority | read-write | current | This object allows configuring encapsulation inner tag priority value of ingress cos mapping. |
| 1.3.6.1.4.1.2544.1.12.4.1.72.1.7 | ColumncmPrioMapV2PrioMappingEncapOuterDscpValue | read-write | current | This object allows configuring encapsulation outer DSCP value of ingress cos mapping. |
| 1.3.6.1.4.1.2544.1.12.4.1.72.1.8 | ColumncmPrioMapV2PrioMappingDscpValue | read-write | current | This object allows configuring DSCP value of ingress cos mapping. |
| 1.3.6.1.4.1.2544.1.12.4.1.73 | TablecmPrioMapV2PrioMappingPriTable | not-accessible | current | A list of entries corresponding to Ethernet Priority Mappings. |
| 1.3.6.1.4.1.2544.1.12.4.1.73.1 | RowcmPrioMapV2PrioMappingPriEntry | not-accessible | current | A conceptual row in the cmPrioMapV2PrioMappingPriTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.73.1.1 | ColumncmPrioMapV2PrioMappingPriIndex | not-accessible | current | The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 1 to 8, in case of D… |
| 1.3.6.1.4.1.2544.1.12.4.1.73.1.2 | ColumncmPrioMapV2PrioMappingPriInPrio | read-write | current | The integer index value corresponding to a priority value based on the cmPrioMapV2ProfileMode. In case of TOS and 8021P, valid indices are 0 to 7, in case of D… |
| 1.3.6.1.4.1.2544.1.12.4.1.73.1.3 | ColumncmPrioMapV2PrioMappingPriPrioControl | read-write | current | This allows specification of whether the priority of incoming X-TAG should be swapped with cmPrioMapV2XTagPriority. |
| 1.3.6.1.4.1.2544.1.12.4.1.73.1.4 | ColumncmPrioMapV2PrioMappingPriXTagPrio | read-write | current | This allows specification of the VLAN priority that will replace the incoming X-TAG's priority. This is applicable with cmPrioMapV2XTagControl as 'swap'. |
| 1.3.6.1.4.1.2544.1.12.4.1.73.1.5 | ColumncmPrioMapV2PrioMappingPriCOS | read-write | current | This allows specification of the COS Priority, i.e. this helps in determining the appropriate COS Policer for the Flow. |
| 1.3.6.1.4.1.2544.1.12.4.1.74 | TablecmPrioMapV2ProfileAppliedObjTable | not-accessible | current | A list of entries corresponding to Ethernet Priority Mappings V2 Profile AppliedObj. |
| 1.3.6.1.4.1.2544.1.12.4.1.74.1 | RowcmPrioMapV2ProfileAppliedObjEntry | not-accessible | current | A conceptual row in the cmPrioMapV2ProfileAppliedObjTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.74.1.1 | ColumncmPrioMapV2ProfileAppliedObj | read-only | current | The object describe the profile Applied to. It maybe the access port or network port or flow etc. |
| 1.3.6.1.4.1.2544.1.12.4.1.75 | TablecmAccPortExtTable | not-accessible | current | A list of entries corresponding to Access Port for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.75.1 | RowcmAccPortExtEntry | not-accessible | current | A conceptual row in the cmAccPortExtTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.75.1.1 | ColumncmAccPortExtMcastRateLimitEnabled | read-write | current | Whether multicast packets need be limited on this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.75.1.2 | ColumncmAccPortExtMcastRateLimitSpeedLo | read-write | current | The rate limiting for multicast packets per port When cmAccPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.75.1.3 | ColumncmAccPortExtMcastRateLimitSpeedHi | read-write | current | The rate limiting for multicast packets per port When cmAccPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.75.1.4 | ColumncmAccPortExtBcastRateLimitEnabled | read-write | current | Whether broadcast packets need be limited per port. |
| 1.3.6.1.4.1.2544.1.12.4.1.75.1.5 | ColumncmAccPortExtBcastRateLimitSpeedLo | read-write | current | The rate limiting for broadcast packets per port When cmAccPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.75.1.6 | ColumncmAccPortExtBcastRateLimitSpeedHi | read-write | current | The rate limiting for broadcast packets per port When cmAccPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.75.1.7 | ColumncmAccPortExtCombinedRateLimitEnabled | read-write | current | Whether multicast and broadcast packets need be limited per port. |
| 1.3.6.1.4.1.2544.1.12.4.1.75.1.8 | ColumncmAccPortExtCombinedRateLimitSpeedLo | read-write | current | The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits. |
| 1.3.6.1.4.1.2544.1.12.4.1.75.1.9 | ColumncmAccPortExtCombinedRateLimitSpeedHi | read-write | current | The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits. |
| 1.3.6.1.4.1.2544.1.12.4.1.75.1.10 | ColumncmAccPortExtRefPrioMapProfile | read-write | current | This object allows to set priority map profile. |
| 1.3.6.1.4.1.2544.1.12.4.1.76 | TablecmNetPortExtTable | not-accessible | current | A list of entries corresponding to Network Port for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.76.1 | RowcmNetPortExtEntry | not-accessible | current | A conceptual row in the cmNetPortExtTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.76.1.1 | ColumncmNetPortExtMcastRateLimitEnabled | read-write | current | Whether multicast packets need be limited on this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.76.1.2 | ColumncmNetPortExtMcastRateLimitSpeedLo | read-write | current | The rate limiting for multicast packets per port When cmNetPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.76.1.3 | ColumncmNetPortExtMcastRateLimitSpeedHi | read-write | current | The rate limiting for multicast packets per port When cmNetPortExtMcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.76.1.4 | ColumncmNetPortExtBcastRateLimitEnabled | read-write | current | Whether broadcast packets need be limited per port. |
| 1.3.6.1.4.1.2544.1.12.4.1.76.1.5 | ColumncmNetPortExtBcastRateLimitSpeedLo | read-write | current | The rate limiting for broadcast packets per port When cmNetPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.76.1.6 | ColumncmNetPortExtBcastRateLimitSpeedHi | read-write | current | The rate limiting for broadcast packets per port When cmNetPortExtBcastRateLimitEnabled and the value is 0, it means all multicast frame are dropped. This obje… |
| 1.3.6.1.4.1.2544.1.12.4.1.76.1.7 | ColumncmNetPortExtCombinedRateLimitEnabled | read-write | current | Whether multicast and broadcast packets need be limited per port. |
| 1.3.6.1.4.1.2544.1.12.4.1.76.1.8 | ColumncmNetPortExtCombinedRateLimitSpeedLo | read-write | current | The rate limiting for multicast and broadcast packets per port. This objects only represents low 32 bits. |
| 1.3.6.1.4.1.2544.1.12.4.1.76.1.9 | ColumncmNetPortExtCombinedRateLimitSpeedHi | read-write | current | The rate limiting for multicast and broadcast packets per port. This objects only represents high 32 bits. |
| 1.3.6.1.4.1.2544.1.12.4.1.76.1.10 | ColumncmNetPortExtRefPrioMapProfile | read-write | current | This object allows to set priority map profile. |
| 1.3.6.1.4.1.2544.1.12.4.1.77 | Tablef3UsbWIFIDonglePortTable | not-accessible | current | A list of entries corresponding to wifi dongle Port for configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1 | Rowf3UsbWIFIDonglePortEntry | not-accessible | current | A conceptual row in the f3UsbWIFIDonglePortTable. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.1 | Columnf3UsbWIFIDonglePortIndex | not-accessible | current | An integer index value used to uniquely identify WIFI dongle port. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.2 | Columnf3UsbWIFIDonglePortIfIndex | read-only | current | This object has the same value as ifIndex for WIFI dongle Port. An integer index value used to uniquely identify this Port |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.3 | Columnf3UsbWIFIDonglePortEntityIndex | read-only | current | Entity Index from ENTITY-MIB for this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.4 | Columnf3UsbWIFIDonglePortAdminState | read-write | current | This object represents the Administrative State of this Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.5 | Columnf3UsbWIFIDonglePortOperationalState | read-only | current | This object represents the Operational State of this Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.6 | Columnf3UsbWIFIDonglePortSecondaryState | read-only | current | This object represents the Secondary State of this Port. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.7 | Columnf3UsbWIFIDonglePortSSID | read-write | current | This object represents the SSID value of this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.8 | Columnf3UsbWIFIDonglePortPassword | read-write | current | This object represents the password value of this SSID. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.9 | Columnf3UsbWIFIDonglePortEncryption | read-write | current | The encryption type of this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.10 | Columnf3UsbWIFIDonglePortIPAddress | read-write | current | The IP address of this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.11 | Columnf3UsbWIFIDonglePortwWIFIIPNetMask | read-write | current | The IP address mask of this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.12 | Columnf3UsbWIFIDonglePortWIFIDHCPRole | read-only | current | The DHCP role type of this port. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.13 | Columnf3UsbWIFIDonglePortWIFIAllocatedIPFrom | read-write | current | The start IP address could be allocated. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.14 | Columnf3UsbWIFIDonglePortWIFIAllocatedIPEnd | read-write | current | The last IP address could be allocated. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.15 | Columnf3UsbWIFIDonglePortStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.16 | Columnf3UsbWIFIDonglePortRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.4.1.77.1.17 | Columnf3UsbWIFIDonglePortAccessdUsers | read-only | current | The users list of accessed via WIFI dongle port. |
| 1.3.6.1.4.1.2544.1.12.4.2 | NodecmFacilityConformance | |||
| 1.3.6.1.4.1.2544.1.12.4.2.1 | NodecmFacilityCompliances | |||
| 1.3.6.1.4.1.2544.1.12.4.2.1.1 | CompliancecmFacilityCompliance | current | Describes the requirements for conformance to the CM Facility group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2 | NodecmFacilityGroups | |||
| 1.3.6.1.4.1.2544.1.12.4.2.2.1 | GroupcmFacilityObjectGroup | deprecated | *********************THIS GROUP IS NOW DEPRECATED ********************* A collection of objects used to manage the CM Facility group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.2 | GroupethernetAccessPortGroup | current | A collection of objects used to manage the F3 Ethernet Access Port function. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.3 | GroupethernetNetworkPortGroup | current | A collection of objects used to manage the F3 Ethernet Network Port function. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.4 | GroupethernetMgmtPortGroup | current | A collection of objects used to manage the F3 Ethernet Management Port function. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.5 | GroupbitsPortGroup | current | A collection of objects used to manage the F3 Bits Port function. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.6 | GrouptrafficGroup | current | A collection of objects used to manage the F3 traffic path, consists of Flows, Policers and Shapers. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.7 | GroupprioMapGroup | current | A collection of objects used to manage the F3 Priority Mapping function. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.8 | GrouppcpEncodeGroup | current | A collection of objects used to manage the F3 Priority Mapping function. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.9 | GroupcpdV2Group | current | A collection of objects used to manage the Control Protocol Disposition version 2 function. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.10 | GrouptrafficGroupCmHub | current | A collection of objects used to manage the F3 traffic path, consists of Flows, Policers and Shapers. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.11 | GroupocnStmGroup | current | A collection of objects used to manage the OCN/STM Line. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.12 | GroupstsVcPathGroup | current | A collection of objects used to manage the STS/VC Higher Order Path. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.13 | GroupvtVcPathGroup | current | A collection of objects used to manage the VT/VC Lower Order Path. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.14 | Groupe1t1InterfaceGroup | current | A collection of objects used to manage the E1/T1 Interface Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.15 | Groupe3t3InterfaceGroup | current | A collection of objects used to manage the E3/T3 Interface Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.16 | Groupf3PulsePerSecondPortGroup | current | A collection of objects used to manage the F3 Pulse Per Second Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.17 | Groupf3TimeOfDayPortGroup | current | A collection of objects used to manage the F3 Time of Day Port Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.18 | Groupf3Gps10MhzPortGroup | current | A collection of objects used to manage the F3 GPS 10 Mhz Port Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.19 | GroupethernetNetworkPortExtGroup | current | A collection of objects used to manage the F3 Ethernet Network Port extense function. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.20 | Groupf3GPSReceiverPortGroup | current | A collection of objects used to manage the F3 GPS Receiver Port Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.21 | GroupcmPsePortGroup | current | A collection of objects used to manage the pse port ext entry Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.22 | GroupcmPseEXTGroup | current | A collection of objects used to manage the pse group ext entry Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.23 | GroupcmMPFlowGroup | current | A collection of objects used to manage the MP flow entry Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.24 | GroupcmMPFlowMemberGroup | current | A collection of objects used to manage the MP flow Member entry Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.25 | GroupcmEthernetTrafficPortPcpGroup | current | A collection of objects used to manage the traffic port pcp Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.26 | GroupneTMParamsGroup | current | A collection of objects used to manage the ne facility entry Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.27 | GroupcmEthernetTrafficPortGroup | current | A collection of objects used to manage the traffic port entry Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.28 | GroupcmFlowPointGroup | current | A collection of objects used to manage the flow point entry Group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.29 | GroupethernetAccessPortJdsuExtGroup | current | A collection of objects used to manage the F3 Ethernet Access Port JDSU extense function. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.30 | GroupethernetNetworkPortJdsuExtGroup | current | A collection of objects used to manage the F3 Ethernet Network Port JDSU extense function. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.31 | GroupcmTrafficPortLpbkGroup | current | A collection of objects used to manage the traffic port lpbk group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.32 | GroupcmPrioMapV2ProfileGroup | current | A collection of objects used to manage the priority map profile group. | |
| 1.3.6.1.4.1.2544.1.12.4.2.2.33 | GroupcmPrioMapV2IngressPrioMappingGroup | current | A collection of objects used to manage the priority map group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BandwidthProfileMode | INTEGER { lineRate (1), informationRate (2) } | current | A Network Element level Frame Rate Bandwidth Profile Mode shall be supported which will indicate if the CIR/EIR is interpreted as Information Rate (IR) or Line Rate (LR). In IR mode BWP is enforced based on number of by… |
| BitErrRate | INTEGER { none (0), ber-1e-1 (1), ber-1e-2 (2), ber-1e-3 (3), ber-1e-4 (4), ber-1e-5 (5), ber-1e-6 (6), ber-1e-7 (7), ber-1e-8 (8), ber-1e-9 (9), ber-1e-10 (10) } | current | . |
| BitsFrameFormat | INTEGER { none(1), t1-sf(2), t1-esf(3), e1-unframed(4), e1-crc4(5), e1-dualframe(6) } | current | Enumerations for Bits Frame Format. none, t1-sf, t1-esf, e1-unframed, e1-crc4, e1-dualframe. |
| BitsPortImpedanceMode | INTEGER { bits-120Ohm(1), bits-100Ohm(2) } | current | Describes the impedance mode of the BITS-IN and BITS-OUT interfaces: 120OHM. |
| BitsPortLineCode | INTEGER { none(1), t1-b8zs (2), t1-ami (3), e1-hdb3 (4), e1-ami (5) } | current | Enumerations for BITS Line Code. none, t1-b8zs, t1-ami, e1-hdb3, e1-ami. |
| BitsPortLineType | INTEGER { t1(1), e1(2), type-2048kHz(3) } | current | Enumerations for BITS Line Type. t1, e1, 2048kHz. |
| BitsPortType | INTEGER { bits-in(1), bits-out(2) } | current | Enumerations for BITS Port Type. bits-in, bits-out. |
| CmAclConfiguration | INTEGER { all-bk-l2 (1), all-bk-l2-ipv4 (2), two-bk-l2-ipv4 (3), one-bk-l2-ipv4 (4), none-bk-l2-ipv4(5) } | current | This object is defined to set traffic acl resource allocation. Supported actions are: all-bk-l2 (1) - all bank allocated to l2. all-bk-l2-ipv4(2) - all bank allocated to l2/ipv4. two-bk-l2-ipv4(3) - two thirds allocated… |
| CmActiveControlProtocolsType | BITS { ciscoGroup(1), isl(2), pagp(3), udld(4), cdp(5), vtp(6), dtp(7), pvstpplus(8), uplinkfast(9), vlanbridge(10), l2pt(11), bridgegroup(12), bpdu(13), pause(14), lacp(15), lacpmarker(16), efmoam(17), ssm(18), portauthen(19), bridgereserved(20), lanbridges(21), garpgroup(22), gmrp(23), gvrp(24), garp(25), lldp(26), elmi(27), mac00(28), mac01(29), mac02(30), mac03(31), mac04(32), mac05(33), mac06(34), mac07(35), mac08(36), mac09(37), mac0A(38), mac0B(39), mac0C(40), mac0D(41), mac0E(42), mac0F(43), nearestlldp(44), nontpmrlldp(45), customerlldp(46), ptpNonfwdUntagged(47), ptpNonfwdTagged(48) } | current | Remote Link Ids used to match for Link Loss Forwarding. |
| CmAfpType | INTEGER { tagged (1), untagged (2), all (3) } | current | Describes the Ethernet Acceptable Framing Policy Type. |
| CmControlProtocolDispType | INTEGER { not-applicable(0), discard (1), peer (2), pass-thru (3), use-group-setting(4), not-active(5), use-port-setting(6), pass-thru-l2pt(7), useMacSetting(8) } | current | Describes the Protocol Disposition Type on an interface. |
| CmControlProtocolFilterType | INTEGER { efmoam(1), pause(2) } | current | Describes the Control Protocol Filter Types. |
| CmDiagAutoNegCondType | INTEGER { not-applicable(0), autonegok (1), autonegfailed (2), autonegnotrun (3) } | current | Describes the Ethernet Diagnosis Auto Negotiation Condition Result. |
| CmDiagCableCondType | INTEGER { not-applicable(0), cableshort (1), cableopen (2), cableimpedance (3), cablenotfound (4), cableok (5), cablefailed (6), cablenotrun(7) } | current | Describes the Ethernet Diagnosis Cable Condition Result. |
| CmDiagEfmOamLpbkCondType | INTEGER { not-applicable(0), efmlpbkok (1), efmlpbkfailed (2), efmlpbkfailednendNA (3), efmlpbkfailedfendNA (4), efmlpbknotrun (5) } | current | Describes the Ethernet Diagnosis EFM OAM Loopback Condition Result. |
| CmDiagLpbkCondType | INTEGER { not-applicable(0), lpbkok(1), lpbkfailed (2), lpbknotrun (3) } | current | Describes the Ethernet Diagnosis Loopback Condition Result. |
| CmDiagTestStatus | INTEGER { not-applicable(0), initial (1), in-progress (2), stopped (3), completed (4), aborted (5) } | current | ECPA Test Status. |
| CmEthernetDiagAction | INTEGER { not-applicable(0), autoneg (1), cable (2), loopback (3), efm-oam-lpbk (4), all (5) } | current | Describes the Ethernet Diagnosis Action. autoNeg - Auto negotiation capability, cable - Cable diagnostics, cable fault loopback- Terminal loopback with traffic injection and monitoring efm-oam-lpbk- EFM OAM loopback all… |
| CmEthernetMDIXType | INTEGER { not-applicable (1), auto-mdix (2), crossed (3), uncrossed (4), notAvailable (5) } | current | Describes the Ethernet MDIX Type. auto-mdix - Auto MDIX crossed - Crossed uncrossed - Uncrossed. |
| CmEthernetSvcPortMode | INTEGER { connection-oriented (1), connection-less (2) } | current | Describes the Ethernet Service Port Mode Type. |
| CmEthernetSvcType | INTEGER { epl (1), evpl (2) } | current | Describes the Ethernet Service Type. epl - Ethernet Private Linei, Port-based, all-to-one bundling evpl - Ethernet Virtual Private Line, VLAN based, service multiplexed. |
| CmEthernetTrafficSvcType | INTEGER { all-to-one(1), service-multiplexing(2) } | current | Describes the Ethernet Service Type, including port-based and vlan-based. |
| CmFlowType | INTEGER { portbased (1), regular (2), default (3) } | current | Describes the Ethernet Flow Type. portbased - Port based Flow with full bandwidth of port; this Flow does not do VLAN/MAC based processing regular - Connection-oriented, VLAN based service default - Connection-oriented,… |
| CmLinkLossFwdSignalType | INTEGER { not-applicable(0), llf-efm-signal(1), llf-link-down(2), llf-odu-ais(3), llf-odu-lck(4), llf-odu-tim(5), llf-odu-bdi(6), llf-opu-plm(7), llf-opu-csf(8), llf-eth-epc(9) } | current | Describes the Link Loss Forwarding Signal Types. |
| CmLinkLossFwdTriggerTypes | BITS { trig-efm-signal(1), trig-link-down(2), trig-odu-ais(3), trig-odu-lck(4), trig-odu-tim(5), trig-odu-bdi(6), trig-opu-plm(7), trig-opu-csf(8) } | current | Describes the Link Loss Forwarding Trigger Types. |
| CmLinkLossFwdTxActionType | INTEGER { not-applicable(0), llf-tx-no-action(1), llf-tx-efm-signal(2), llf-tx-link-down(3), llf-odu-ais(4), llf-opu-csf(5), llf-otu-ais(6) } | current | Describes the Link Loss Forwarding Tx Action Types. |
| CmLoopbackType | INTEGER { lpbk-none (1), efm-oam-remote(2), efm-oam-remote-timed(3), facility-port(4), facility-port-timed(5), facility-vlan(6), terminal-port(7), terminal-port-timed(8), terminal-vlan(9), efm-oam-tailend(10), facility-payload(11), facility-payload-timed(12), remote-facility(13), remote-facility-payload(14), tailend-facility(15), tailend-facility-payload(16), terminal-itag(17), facility-itag(18), jdsu-terminal-port-tailend(19), jdsu-terminal-vlan-tailend(20), jdsu-facility-port-tailend(21), jdsu-facility-vlan-tailend(22), facility-och(23), facility-och-timed(24), terminal-och(25), terminal-och-timed(26) } | current | Describes the Loopback Types. |
| CmOamAdminState | INTEGER { not-applicable(0), enabled (1), disabled (2) } | current | Describes the OAM Admin State. |
| CmOamDiscoveryState | INTEGER { unknown (0), fault (1), activesendlocal (2), passivewait (3), sendlocalremote (4), sendlocalremoteok (5), sendany (6) } | current | Describes the OAM Discovery State. |
| CmOamMode | INTEGER { unknown (0), active (1), passive (2) } | current | Describes the OAM Mode. |
| CmRemoteLinkIds | BITS { remoteLinkId1(1), remoteLinkId2(2), remoteLinkId3(3), remoteLinkId4(4), remoteLinkId5(5), remoteLinkId6(6), remoteLinkId7(7), remoteLinkId8(8), remoteLinkId9(9), remoteLinkId10(10), remoteLinkId11(11), remoteLinkId12(12), remoteLinkId13(13), remoteLinkId14(14), remoteLinkId15(15), remoteLinkId16(16) } | current | Remote Link Ids used to match for Link Loss Forwarding. |
| CmSwapSADAType | INTEGER { not-applicable(0), noswapSADA(1), swapSADA (2), swapDAOverrideSA (3), swapSADAMacOnly (4), swapDAOverridesSAMacOnly (5), swapIP(6), swapTCPUDP(7) } | current | Describes the SWAP SADA Types supported. no-swapSADA - No swapping of Source MAC and Destination MAC swapSADA - Do swapping of Source MAC and Destination MAC swapDAOverrideSA - Swap Destination MAC as Source MAC, overri… |
| ConstellationType | INTEGER { gps-only(1), glonass-only(2), gps-and-glonass(3) } | current | Constellation Type of GPS Antenna |
| ConstellationTypesBitMap | BITS { gps(0), glonass(1), beidou(2), galileo(3), sbas(4) } | current | Indicates GNSS constellation types supported by a GNSS Receiver Port. The valid bits must be set in order for this attribute to contain valid information. The representation of each bit setting (0 or 1) is indicated bel… |
| CosMappingMode | INTEGER { ethernet (1), eompls (2), vxlan (3) } | current | EoMpls Cos Mapping mode |
| DeiOuterTagType | INTEGER { stag (1), ctagOrStag (2) } | current | DEI Outer Tag Type. |
| DHCPType | INTEGER { client(1), server(2) } | current | DHCP role type |
| E1T1FrameFormat | INTEGER { none(1), t1-sf(2), t1-esf(3), e1-unframed(4), e1-crc4(5), e1-dualframe(6), t1-unframed(7), e1-basicframe(8) } | current | Enumerations for E1/T1 Frame Format. none, t1-sf, t1-esf, e1-unframed, e1-crc4, e1-dualframe, e1-basicframe. |
| E1T1LineCode | INTEGER { none(1), t1-b8zs (2), t1-ami (3), e1-hdb3 (4), e1-ami (5) } | current | Enumerations for E1/T1 Line Code. none, t1-b8zs, t1-ami, e1-hdb3, e1-ami. |
| E1T1LineType | INTEGER { t1(1), e1(2) } | current | Enumerations for E1/T1 Line Type. t1, e1 |
| E1T1RcvSensitivity | INTEGER { high-range(1), low-range(2) } | current | Enumerations for E1/T1 Receive Sensitivity high-range, low-range |
| E3T3FrameFormat | INTEGER { none(0), dsx3CbitParity (1), g832 (2), e3Unframed (3), dsx3M23 (4), g751 (5), dsx3Unframed (6) } | current | Describes the Frame Format of E3/T3. |
| E3T3Type | INTEGER { none (0), e3 (1), t3 (2) } | current | Describes the type of the E3/T3. |
| EoTDMMode | INTEGER { not-applicable (0), eosdh (1), eopdh (2) } | current | Describes the EoTDM Mode. |
| EthernetPortTrafficModel | INTEGER { accessFlow(1), flowpoint(2) } | current | Traffic Model for Ethernet Port. |
| F3Usb3GDCNPINCodeActionType | INTEGER { not-applicable(0), enable-pin(1), disable-pin(2), change-pin(3), authentication-pin(4), unlock-pin(5) } | current | Describes the 3G Dcn Pin Code Action Types. |
| F3Usb3GNetworkConnectionState | INTEGER { not-applicable(0), connecting(1), connected(2), disconnected(3) } | current | Describes the Connection State of the 3G Usb Modem. |
| F3Usb3GRecvSignalStrengthInd | INTEGER { not-applicable(0), high(1), medium(2), low(3), none(4) } | current | Describes the Recived Signal Strength of the 3G Usb Modem. |
| F3Usb3GSimCardState | INTEGER { not-applicable(0), ok(1), notinserted(2), networkrejected(3), unknown(4) } | current | Describes the 3G Usb Sim Card States. |
| FlowConfigType | INTEGER { access(1), passThru(2) } | current | Defines types of Flow. |
| FlowTagControl | INTEGER { none (1), push (2), swapvid (3), pushvid (4), pop(5), pushisid(6) } | current | Describes the Ethernet Flow Tag Control Type. |
| FlowTrafficType | INTEGER { shaped-only (1), policed-shaped (2), policed-only (3) } | current | Describes the Flow Traffic Type. shaped-only, policed-shaped, policed-only. |
| FlowVlanActionType | INTEGER { no-action (1), add-vlan (2), remove-vlan (3) } | current | Describes the Ethernet Flow Action. Used for adding/removing VLAN members |
| G3AuthStatus | INTEGER { disabled (1), ok (2), input-pin (3), input-puk (4), locked (5), none (6) } | current | Disabled (PIN protection is disabled) OK (PIN protection is enabled and PIN code is correct) Input PIN (input PIN to unlock) Input PUK (PIN code is locked, input PUK to unlock) Locked (must contact with SIM provider). |
| GFPEncapsulationType | INTEGER { none(0), gfp (1), gfp-fcs (2), gfp-novcat (3), gfp-zerovcat (4), gfp-fcs-novcat (5), gfp-fcs-zerovcat (6), x86 (7) } | current | Describes the GFP Encapsulation of the traffic port. |
| GPSAntennaStatus | INTEGER { open(1), short(2), normal(3), unavailable(4) } | current | Enumerations for GPS Antenna Status |
| InstallationType | INTEGER { full-sky-view(1), limited-sky-view(2) } | current | Installation Type of GPS Antenna |
| LearningAction | INTEGER { block (1), forward (2) } | current | Describes Action on ingress frames when the number of MAC Table entires has reached the maximum defined by tableSize |
| LearningConfigAction | INTEGER { noAction (1), flushFwdTable (2), clearBlock (3), resetAgingTimer(4) } | current | Learning Action: noAction - No Action flushFwdTable - Removes all dynamic entries from the Forwarding table of a Flow. clearBlock - removes the secondary state of BLCKD and transitions the flow to a state where frames a… |
| LineBuildOut | INTEGER { none(0), lbo-0-133ft(1), lbo-133-266ft(2), lbo-266-399ft(3), lbo-399-533ft(4), lbo-533-655ft(5), lbo-7dot5db(6), lbo-15db(7), lbo-22dot5db(8) } | current | none, 0-133ft, 133-266ft, 266-399ft, 399-533ft, 533-655ft, 7dot5db, 15db, 22dot5db. |
| MultiplexingStructure | INTEGER { not-applicable (0), vt-sts1 (1), sts1spe-sts1 (2), sts3cspe-sts3c (3), vc12-vc4-aug (4), vc12-vc3-aug (5), vc3-aug (6), vc3-vc4-aug (7), vc4-aug (8), custom (9) } | current | Describes the Multiplexing Structure. |
| OCNSTMPortType | INTEGER { oc12(1), oc3(2), stm4(3), stm1(4) } | current | OCN/STM Port Type. |
| PcpDEEncType | INTEGER { enc-none(1), enc-7p1d(2), enc-6p2d(3), enc-5p3d(4), enc-custom(5) } | current | Enumerations for PCP Drop Eligibility Encode Type. enc-none, enc-7p1d, enc-6p2d, enc-5p3d, enc-custom. |
| PcpDEPairsAction | INTEGER { none(0), apply-pairs(1) } | current | none, apply-pairs. |
| PolicerAlgorithmType | INTEGER { srTCM (1), trTCM (2) } | current | Describes the Policer Algorithm Type. |
| PolicerColorMode | INTEGER { color-aware (1), color-blind (2) } | current | Describes the Policer Color Mode. |
| PolicingControl | INTEGER { a2n(1), n2a(2), a2nN2a(3), n2n(4) } | current | Defines Policing Control options. |
| PPSGenCondition | INTEGER { tracked-1sat(1), tracked-3sat(2) } | current | Enumerations for PPS Generation Condition tracked-1sat, tracked-3sat |
| PPSInputRate | INTEGER { pulse-per-sec(1), pulse-per-2sec(2) } | current | Describes the PPS Input Rate. |
| PPSPhyInterfaceType | INTEGER { none(0), pps(1), tod(2) } | current | Describes the PPS physical interface type. |
| PrioMapControlType | INTEGER { none (1), swap (2) } | current | Describes the Priority Mapping Control Type. |
| PSENonStandardPD | INTEGER { enabled (1), disabled (2) } | current | Enumerations for NonStandardPD disabled:don't support non-standard PD, enabled:support non-standard PD |
| PsePowerLevel | INTEGER { class1 (1), class2 (2), class0andclass3 (3), class4 (4) } | current | Defines the power level for pse port. class1 (4.00 Watts) :0 class2 (7.00 Watts) :1 class0andclass 3 (15.4 Watts):2 class4 (30 Watts):3. |
| RxDeiAction | INTEGER { ignore (1), use (2) } | current | Receive DEI Action. |
| SaBitDesignation | INTEGER { none(1), bit4(2), bit5(3), bit6(4), bit7(5), bit8(6) } | current | Enumerations for SA Bit Desgination. none, bit4, bit5, bit6, bit7, bit8. |
| SfpChannelIdentifier | INTEGER { not-applicable (0), none(1), frequency-19610 (2), frequency-19595 (3), frequency-19585 (4), frequency-19575 (5), frequency-19565 (6), frequency-19555 (7), frequency-19545 (8), frequency-19535 (9), frequency-19525 (10), frequency-19515 (11), frequency-19505 (12), frequency-19495 (13), frequency-19485 (14), frequency-19475 (15), frequency-19465 (16), frequency-19455 (17), frequency-19445 (18), frequency-19435 (19), frequency-19425 (20), frequency-19415 (21), frequency-19405 (22), frequency-19395 (23), frequency-19385 (24), frequency-19375 (25), frequency-19365 (26), frequency-19355 (27), frequency-19345 (28), frequency-19335 (29), frequency-19325 (30), frequency-19315 (31), frequency-19305 (32), frequency-19295 (33), frequency-19285 (34), frequency-19275 (35), frequency-19265 (36), frequency-19255 (37), frequency-19245 (38), frequency-19235 (39), frequency-19225 (40), frequency-19215 (41), frequency-19205 (42), frequency-19600 (43), frequency-19590 (44), frequency-19580 (45), frequency-19570 (46), frequency-19560 (47), frequency-19550 (48), frequency-19540 (49), frequency-19530 (50), frequency-19520 (51), frequency-19510 (52), frequency-19500 (53), frequency-19490 (54), frequency-19480 (55), frequency-19470 (56), frequency-19460 (57), frequency-19450 (58), frequency-19440 (59), frequency-19430 (60), frequency-19420 (61), frequency-19410 (62), frequency-19400 (63), frequency-19390 (64), frequency-19380 (65), frequency-19370 (66), frequency-19360 (67), frequency-19350 (68), frequency-19340 (69), frequency-19330 (70), frequency-19320 (71), frequency-19310 (72), frequency-19300 (73), frequency-19290 (74), frequency-19280 (75), frequency-19270 (76), frequency-19260 (77), frequency-19250 (78), frequency-19240 (79), frequency-19230 (80), frequency-19220 (81), frequency-19210 (82), frequency-19200 (83), frequency-19195 (84), frequency-19190 (85), frequency-19185 (86), frequency-19180 (87), frequency-19175 (88), frequency-19170 (89), frequency-19165 (90), frequency-19160 (91), frequency-19155 (92), frequency-19150 (93), frequency-19145 (94), frequency-19140 (95), frequency-19135 (96), frequency-19130 (97), frequency-19125 (98) } | current | Describes Channel number of WDM tunable XFP setting. |
| ShapingType | INTEGER { port-based(1), flow-based(2), llq(3) } | current | port-based - traffic shaping at Port level flow-based - traffic shaping at Flow level llq - low latency queuing |
| TDMPathType | INTEGER { none (0), t1 (1), e1 (2), t3 (3), e3 (4), vc12 (5), vc3 (6), vc4 (7), vt15 (8), sts1 (9), sts3c (10) } | current | Describes the path type. |
| TrafficPortDeleteEntitiesAction | INTEGER { no-action (1), delete-esa-entities (2), delete-cfm-entities (3) } | current | Learning Action: no-action - No Action delete-esa-entities - Removes all esa entities relate to this port. delete-cfm-entities - Removes all cfm entities relate to this port. |
| TrailTraceFormat | INTEGER { not-applicable (0), onebytemode (1), sixteenbytemode (2), sixtyfourbytemode (3) } | current | Describes the Trail Trace Format. |
| TxDeiAction | INTEGER { setToZero (1), markColor (2), noChange (3) } | current | Transmit DEI Action. |
| UsbDCNMobileNetworkType | INTEGER { none (1), secondGeneration (2), thirdGeneration (3), fourthGeneration (4), notApplicable(5) } | current | Mobile network type: none secondGeneration - 2G. thirdGeneration - 3G, fourthGeneration - 4G, notApplicable. |
| WIFIEncryptionType | INTEGER { notApplicable(0), wpa-psk(1), wpa2-psk(2), wpa-wpa2-psk(3) } | current | Type of WIFI encryption |
| XgePhyType | INTEGER { not-applicable(0), lan(1), wan(2), otn(3) } | current | Specifies the Ethernet 10G port PHY type. not-applicable - for non-10G ports lan - 10G LAN-PHY mode (10GBASE-R) operating at 10Gb/sec wan - 10G WAN-PHY mode (10GBASE-W) operating at 9.29Gb/sec |