F3-JDSU-MIB
86 objects
This module defines the JDSU MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Imported Objects
| ADVA-MIB | fsp150cm |
| CM-COMMON-MIB | AdminState OperationalState SecondaryState VlanId VlanPriority |
| CM-ENTITY-MIB | neIndex shelfIndex slotIndex |
| CM-FACILITY-MIB | cmEthernetTrafficPortEntry cmEthernetTrafficPortIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus StorageType TEXTUAL-CONVENTION TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.12.31 | Identityf3JdsuMIB | This module defines the JDSU MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||
| 1.3.6.1.4.1.2544.1.12.31.1 | Nodef3JdsuObjects | |||
| 1.3.6.1.4.1.2544.1.12.31.1.1 | Scalarf3JdsuGeneratorPort | read-write | current | This object describes the port which will raise a JDSU discovery. |
| 1.3.6.1.4.1.2544.1.12.31.1.2 | Scalarf3JdsuGeneratorOuterVlanEnabled | read-write | current | This object describes whether the filter's Outer Vlan enabled. |
| 1.3.6.1.4.1.2544.1.12.31.1.3 | Scalarf3JdsuGeneratorOuterVlanId | read-write | current | This object describes the filter's Outer VlanId. |
| 1.3.6.1.4.1.2544.1.12.31.1.4 | Scalarf3JdsuGeneratorOuterVlanPri | read-write | current | This object describes the filter's Outer Vlan Priority. |
| 1.3.6.1.4.1.2544.1.12.31.1.5 | Scalarf3JdsuGeneratorOuterVlanEtherType | read-write | current | This object describes the filter's Outer Vlan Ether Type. |
| 1.3.6.1.4.1.2544.1.12.31.1.6 | Scalarf3JdsuGeneratorInnerVlan1Enabled | read-write | current | This object describes whether the filter's Inner Vlan1 enabled. |
| 1.3.6.1.4.1.2544.1.12.31.1.7 | Scalarf3JdsuGeneratorInnerVlan1Id | read-write | current | This object describes the filter's Inner Vlan1 ID. |
| 1.3.6.1.4.1.2544.1.12.31.1.8 | Scalarf3JdsuGeneratorInnerVlan1Pri | read-write | current | This object describes the filter's Inner Vlan1 Priority. |
| 1.3.6.1.4.1.2544.1.12.31.1.9 | Scalarf3JdsuGeneratorInnerVlan1EtherType | read-write | current | This object describes the filter's Inner Vlan1 Ether Type. |
| 1.3.6.1.4.1.2544.1.12.31.1.10 | Scalarf3JdsuGeneratorInnerVlan2Enabled | read-write | current | This object describes whether the filter's Inner Vlan2 enabled. |
| 1.3.6.1.4.1.2544.1.12.31.1.11 | Scalarf3JdsuGeneratorInnerVlan2Id | read-write | current | This object describes the filter's Inner Vlan2 ID. |
| 1.3.6.1.4.1.2544.1.12.31.1.12 | Scalarf3JdsuGeneratorInnerVlan2Pri | read-write | current | This object describes the filter's Inner Vlan2 Priority. |
| 1.3.6.1.4.1.2544.1.12.31.1.13 | Scalarf3JdsuGeneratorInnerVlan2EtherType | read-write | current | This object describes the filter's Inner Vlan2 Ether Type. |
| 1.3.6.1.4.1.2544.1.12.31.1.14 | Scalarf3JdsuGeneratorFrameType | read-write | current | This object describe the filter's frame type. Its default value is 802.3. |
| 1.3.6.1.4.1.2544.1.12.31.1.15 | Scalarf3JdsuGeneratorPayloadType | read-write | current | Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short con… |
| 1.3.6.1.4.1.2544.1.12.31.1.16 | Scalarf3JdsuGeneratorFrameLength | read-write | current | Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600. |
| 1.3.6.1.4.1.2544.1.12.31.1.17 | Scalarf3JdsuGeneratorDiscoveryAction | read-write | current | Indicates the discovery action on the JDSU generator. |
| 1.3.6.1.4.1.2544.1.12.31.1.18 | Tablef3JdsuGeneratorDiscoverTable | not-accessible | current | A list of entries corresponding to JDSU Generator Discover Information. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1 | Rowf3JdsuGeneratorDiscoverEntry | not-accessible | current | A conceptual row in the f3JdsuGeneratorDiscoverTable. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.1 | Columnf3JdsuGeneratorDiscoverDestMacAddr | not-accessible | current | This object describes the destination MAC address for the test frames. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.2 | Columnf3JdsuGeneratorDiscoverOuterVlanEnabled | read-only | current | This object describes whether the filter's Outer Vlan enabled. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.3 | Columnf3JdsuGeneratorDiscoverOuterVlanId | read-only | current | This object describes the filter's Outer Vlan ID. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.4 | Columnf3JdsuGeneratorDiscoverOuterVlanPri | read-only | current | This object describes the filter's Outer Vlan Priority. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.5 | Columnf3JdsuGeneratorDiscoverOuterVlanEtherType | read-only | current | This object describe the filter's Outer Vlan Ether Type. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.6 | Columnf3JdsuGeneratorDiscoverInnerVlan1Enabled | read-only | current | This object describes whether the filter's Inner Vlan1 enabled. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.7 | Columnf3JdsuGeneratorDiscoverInnerVlan1Id | read-only | current | This object describe the filter's Inner Vlan1 ID. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.8 | Columnf3JdsuGeneratorDiscoverInnerVlan1Pri | read-only | current | This object describes the filter's Inner Vlan1 Priority. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.9 | Columnf3JdsuGeneratorDiscoverInnerVlan1EtherType | read-only | current | This object describes the filter's Inner Vlan1 Ether Type. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.10 | Columnf3JdsuGeneratorDiscoverInnerVlan2Enabled | read-only | current | This object describes whether the filter's Inner Vlan2 enabled. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.11 | Columnf3JdsuGeneratorDiscoverInnerVlan2Id | read-only | current | This object describes the filter's Inner Vlan2 ID. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.12 | Columnf3JdsuGeneratorDiscoverInnerVlan2Pri | read-only | current | This object describes the filter's Inner Vlan2 Priority. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.13 | Columnf3JdsuGeneratorDiscoverInnerVlan2EtherType | read-only | current | This object describes the filter's Inner Vlan2 Ether Type. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.14 | Columnf3JdsuGeneratorDiscoverFrameType | read-only | current | This object describes the filter's frame type. Its default value is 802.3. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.15 | Columnf3JdsuGeneratorDiscoverPayloadType | read-only | current | Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short con… |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.16 | Columnf3JdsuGeneratorDiscoverFrameLength | read-write | current | Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.17 | Columnf3JdsuGeneratorDiscoverUnitTextId | read-only | current | Indicates the string from remote device. Normally it is system name of remote device. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.18 | Columnf3JdsuGeneratorDiscoverIfReachable | read-only | current | Indicate whether the mac can be discovered or not exactly. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.19 | Columnf3JdsuGeneratorDiscoverGeneratorStatus | read-only | current | Indicates the generator status. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.20 | Columnf3JdsuGeneratorDiscoverItemOperation | read-write | current | action save the discoverd items. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.21 | Columnf3JdsuGeneratorDiscoverItemIfSaved | read-only | current | Indicates whether the discoverd item saved status. |
| 1.3.6.1.4.1.2544.1.12.31.1.18.1.22 | Columnf3JdsuGeneratorDiscoverGeneratorAction | read-write | current | Indicates looup or lookdown action. |
| 1.3.6.1.4.1.2544.1.12.31.1.19 | Tablef3JdsuGeneratorConfigureTable | not-accessible | current | A list of entries corresponding to JDSU Generator Configure Information. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1 | Rowf3JdsuGeneratorConfigureEntry | not-accessible | current | A conceptual row in the f3JdsuGeneratorConfigureTable. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.1 | Columnf3JdsuGeneratorConfigureDestMacAddr | not-accessible | current | This object describes the destination MAC address for the test frames. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.2 | Columnf3JdsuGeneratorConfigureOuterVlanEnabled | read-only | current | This object describes whether the filter's Outer Vlan enabled. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.3 | Columnf3JdsuGeneratorConfigureOuterVlanId | read-only | current | This object describes the filter's Outer Vlan ID. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.4 | Columnf3JdsuGeneratorConfigureOuterVlanPri | read-only | current | This object describes the filter's Outer Vlan Priority. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.5 | Columnf3JdsuGeneratorConfigureOuterVlanEtherType | read-only | current | This object describes the filter's Outer Vlan Ether Type. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.6 | Columnf3JdsuGeneratorConfigureInnerVlan1Enabled | read-only | current | This object describes whether the filter's Inner Vlan1 enabled. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.7 | Columnf3JdsuGeneratorConfigureInnerVlan1Id | read-only | current | This object describes the filter's Inner Vlan1 ID. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.8 | Columnf3JdsuGeneratorConfigureInnerVlan1Pri | read-only | current | This object describes the filter's Inner Vlan1 Priority. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.9 | Columnf3JdsuGeneratorConfigureInnerVlan1EtherType | read-only | current | This object describes the filter's Inner Vlan1 Ether Type. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.10 | Columnf3JdsuGeneratorConfigureInnerVlan2Enabled | read-only | current | This object describes whether the filter's Inner Vlan2 enabled. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.11 | Columnf3JdsuGeneratorConfigureInnerVlan2Id | read-only | current | This object describes the filter's Inner Vlan2 ID. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.12 | Columnf3JdsuGeneratorConfigureInnerVlan2Pri | read-only | current | This object describes the filter's Inner Vlan2 Priority. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.13 | Columnf3JdsuGeneratorConfigureInnerVlan2EtherType | read-only | current | This object describes the filter's Inner Vlan2 Ether Type. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.14 | Columnf3JdsuGeneratorConfigureFrameType | read-only | current | This object describes the filter's frame type. Its default value is 802.3. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.15 | Columnf3JdsuGeneratorConfigurePayloadType | read-only | current | Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short con… |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.16 | Columnf3JdsuGeneratorConfigureFrameLength | read-write | current | Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.17 | Columnf3JdsuGeneratorConfigureUnitTextId | read-only | current | Indicates the string from remote device. Normally it is system name of remote device. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.18 | Columnf3JdsuGeneratorConfigureIfReachable | read-only | current | Indicates whether the mac can be Configureed or not exactly. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.19 | Columnf3JdsuGeneratorConfigureReachableUpdate | read-write | current | Action on update the reachable status of the related item. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.20 | Columnf3JdsuGeneratorConfigureStatus | read-only | current | Indicates the generator status exactly. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.21 | Columnf3JdsuGeneratorConfigureGeneratorAction | read-write | current | Indicates JDSU Generator lookup or lookdown action. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.22 | Columnf3JdsuGeneratorConfigureStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.31.1.19.1.23 | Columnf3JdsuGeneratorConfigureRowStatus | read-create | current | The status of this row. Note: one row can be deleted by set this item as destoryed. |
| 1.3.6.1.4.1.2544.1.12.31.1.20 | Tablef3EthernetTrafficPortJdsuExtTable | not-accessible | current | A list of entries corresponding to Ethernet Traffic Port Facilities for JDSU configuration purposes. |
| 1.3.6.1.4.1.2544.1.12.31.1.20.1 | Rowf3EthernetTrafficPortJdsuExtEntry | not-accessible | current | A conceptual row in the cmEthernetTrafficPortJdsuExtTable. |
| 1.3.6.1.4.1.2544.1.12.31.1.20.1.1 | Columnf3EthernetTrafficPortJdsuLoopbackEnabled | read-write | current | Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo re… |
| 1.3.6.1.4.1.2544.1.12.31.1.20.1.2 | Columnf3EthernetTrafficPortJdsuGenerationEanbled | read-write | current | This object describes whether the user would to raise a JDSU discovery action. When JDSU Loopback Enabled, this attribute cann't be enabled. |
| 1.3.6.1.4.1.2544.1.12.31.1.20.1.3 | Columnf3EthernetTrafficPortJdsuLoopbackVlanList | read-only | current | In EG-X, up to 12 loopback can be supported and also up to 2 layer VLAN can be supported. The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid… |
| 1.3.6.1.4.1.2544.1.12.31.2 | Nodef3JdsuNotifications | |||
| 1.3.6.1.4.1.2544.1.12.31.3 | Nodef3JdsuConformance | |||
| 1.3.6.1.4.1.2544.1.12.31.3.1 | Nodef3JdsuCompliances | |||
| 1.3.6.1.4.1.2544.1.12.31.3.1.1 | Compliancef3JdsuCompliance | current | Describes the requirements for conformance to the f3 jdsu group. | |
| 1.3.6.1.4.1.2544.1.12.31.3.2 | Nodef3JdsuGroups | |||
| 1.3.6.1.4.1.2544.1.12.31.3.2.1 | Groupf3JdsuGroup | current | A collection of objects used to manage the JDSU functionality. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DiscoveryAction | INTEGER { notApplicable(1), discover(2) } | current | The lookup or lookdown action of JDSU generator. |
| GeneratorAction | INTEGER { notApplicable(1), loopUp(2), loopDown(3) } | current | The lookup or lookdown action of JDSU generator. |
| GeneratorStatus | INTEGER { none(1), initial(2), helloIngress(3), helloCompleted(4), helloFailed(5), lookupIngress(6), lookupCompleted(7), lookupFailed(8), lookdownIngress(9), lookdownCompleted(10), lookdownFailed(11) } | current | The exact generator status. |
| ItemOperation | INTEGER { notApplicable(1), save(2) } | current | Indicate the save action. |
| JdsuGeneratorFrameType | INTEGER { none(1), frameType8023(2) } | current | The frame type of JDSU generator. frameType8023 means 802.3 |
| JdsuGeneratorPayloadType | INTEGER { none(1), fixed(2), random(3) } | current | The frame type of JDSU generator. |
| UpdateReachStatus | INTEGER { notApplicable(1), update(2) } | current | Action on update reachable status. |