F3-PWE3-MIB
128 objects
This module provides the F3 Pseudo Wire definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Imported Objects
| ADVA-MIB | fsp150cm |
| CM-COMMON-MIB | AdminState CmPmBinAction CmPmIntervalType IpPriorityMapMode IpVersion OperationalState PerfCounter64 SecondaryState VlanId VlanPriority |
| CM-ENTITY-MIB | neIndex shelfIndex slotIndex |
| CM-FACILITY-MIB | cmEthernetAccPortIndex cmEthernetNetPortIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus StorageType TEXTUAL-CONVENTION TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.12.19 | Identityf3Pwe3MIB | This module provides the F3 Pseudo Wire definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||
| 1.3.6.1.4.1.2544.1.12.19.1 | Nodef3Pwe3ConfigObjects | |||
| 1.3.6.1.4.1.2544.1.12.19.1.1 | Tablef3Pwe3IdlePatternProfileTable | not-accessible | current | A list of entries corresponding to the PWE3 Idle Pattern Profile entities. |
| 1.3.6.1.4.1.2544.1.12.19.1.1.1 | Rowf3Pwe3IdlePatternProfileEntry | not-accessible | current | An entry containing information applicable to a particular PWE3 Idle Pattern Profile Entity. These profiles are used by PWE3 SAToP entities. |
| 1.3.6.1.4.1.2544.1.12.19.1.1.1.1 | Columnf3Pwe3IdlePatternProfileIndex | not-accessible | current | Unique index value associated with the PWE3 Idle Pattern Profile. |
| 1.3.6.1.4.1.2544.1.12.19.1.1.1.2 | Columnf3Pwe3IdlePatternProfileByte | read-write | current | This object allows SNMP management entities to specify the Idle Pattern Profile information. |
| 1.3.6.1.4.1.2544.1.12.19.1.2 | Tablef3Pwe3ResyncProfileTable | not-accessible | current | A list of entries corresponding to the PWE3 Resync Profile entities. |
| 1.3.6.1.4.1.2544.1.12.19.1.2.1 | Rowf3Pwe3ResyncProfileEntry | not-accessible | current | An entry containing information applicable to a particular PWE3 Resync Profile Entity. These profiles are used by PWE3 SAToP entities. |
| 1.3.6.1.4.1.2544.1.12.19.1.2.1.1 | Columnf3Pwe3ResyncProfileIndex | not-accessible | current | Unique index value associated with the PWE3 Resync Profile. |
| 1.3.6.1.4.1.2544.1.12.19.1.2.1.2 | Columnf3Pwe3ResyncProfileIncreaseFactor | read-write | current | This object allows SNMP management entities to specify the PWE3 Resync Profile Increase Factor. This is used to define the fill rate of the leaky bucket algori… |
| 1.3.6.1.4.1.2544.1.12.19.1.2.1.3 | Columnf3Pwe3ResyncProfileDecreaseFactor | read-write | current | This object allows SNMP management entities to specify the PWE3 Resync Profile Decrease Factor. This is used to define the leak rate for the leaky bucket algor… |
| 1.3.6.1.4.1.2544.1.12.19.1.2.1.4 | Columnf3Pwe3ResyncProfileResyncThreshold | read-write | current | This object allows SNMP management entities to specify the PWE3 Resync Profile Resync Threshold. This is the threshold value at which point the pseudo-wire con… |
| 1.3.6.1.4.1.2544.1.12.19.1.3 | Tablef3Pwe3LoopbackProfileTable | not-accessible | current | A list of entries corresponding to the PWE3 Loopback Profile entities. |
| 1.3.6.1.4.1.2544.1.12.19.1.3.1 | Rowf3Pwe3LoopbackProfileEntry | not-accessible | current | An entry containing information applicable to a particular PWE3 Loopback Profile Entity. These profiles are used by PWE3 T1/E1 interfaces. |
| 1.3.6.1.4.1.2544.1.12.19.1.3.1.1 | Columnf3Pwe3LoopbackProfileIndex | not-accessible | current | Unique index value associated with the PWE3 Loopback Profile. |
| 1.3.6.1.4.1.2544.1.12.19.1.3.1.2 | Columnf3Pwe3LoopbackProfileLength | read-write | current | This object allows SNMP management entities to specify the PWE3 Loopback Length. |
| 1.3.6.1.4.1.2544.1.12.19.1.3.1.3 | Columnf3Pwe3LoopbackProfilePattern | read-write | current | This object allows SNMP management entities to specify the PWE3 Loopback Pattern. |
| 1.3.6.1.4.1.2544.1.12.19.1.3.1.4 | Columnf3Pwe3LoopbackProfileRepeatTime | read-write | current | This object allows SNMP management entities to specify the PWE3 Loopback Profile Repeat Time (Duration). |
| 1.3.6.1.4.1.2544.1.12.19.1.3.1.5 | Columnf3Pwe3LoopbackProfileClearLength | read-write | current | This object allows SNMP management entities to specify the Loopback PWE3 Clear Length. |
| 1.3.6.1.4.1.2544.1.12.19.1.3.1.6 | Columnf3Pwe3LoopbackProfileClearPattern | read-write | current | This object allows SNMP management entities to specify the PWE3 Loopback Clear Pattern. |
| 1.3.6.1.4.1.2544.1.12.19.1.4 | Tablef3Pwe3LossProfileTable | not-accessible | current | A list of entries corresponding to the PWE3 Loss Profile entities. |
| 1.3.6.1.4.1.2544.1.12.19.1.4.1 | Rowf3Pwe3LossProfileEntry | not-accessible | current | An entry containing information applicable to a particular PWE3 Loss Profile Entity. These profiles are used by PWE3 SAToP entities. |
| 1.3.6.1.4.1.2544.1.12.19.1.4.1.1 | Columnf3Pwe3LossProfileIndex | not-accessible | current | Unique index value associated with the PWE3 Loss Profile. |
| 1.3.6.1.4.1.2544.1.12.19.1.4.1.2 | Columnf3Pwe3LossProfileLossStateEnterTime | read-write | current | This object allows SNMP management entities to specify the holdoff time that will be applied prior to the SAToP instance entering a Loss State. |
| 1.3.6.1.4.1.2544.1.12.19.1.4.1.3 | Columnf3Pwe3LossProfileLossStateExitTime | read-write | current | This object allows SNMP management entities to specify the holdon time that will be applied when the conditon causing the loss state clears. |
| 1.3.6.1.4.1.2544.1.12.19.1.5 | Tablef3Pwe3AisStabilizationProfileTable | not-accessible | current | A list of entries corresponding to the PWE3 AisStabilization Profile entities. |
| 1.3.6.1.4.1.2544.1.12.19.1.5.1 | Rowf3Pwe3AisStabilizationProfileEntry | not-accessible | current | An entry containing information applicable to a particular PWE3 AisStabilization Profile Entity. These profiles are used by PWE3 SAToP entities. |
| 1.3.6.1.4.1.2544.1.12.19.1.5.1.1 | Columnf3Pwe3AisStabilizationProfileIndex | not-accessible | current | Unique index value associated with the PWE3 AIS Stabilization Profile. |
| 1.3.6.1.4.1.2544.1.12.19.1.5.1.2 | Columnf3Pwe3AisStabilizationProfileEnterTime | read-write | current | This object allows SNMP management entities to specify the time (in hundreds of milliseconds) that will be applied on a LOS event, before the SAToP instance tr… |
| 1.3.6.1.4.1.2544.1.12.19.1.5.1.3 | Columnf3Pwe3AisStabilizationProfileExitTime | read-write | current | This object allows SNMP management entities to specify the holdon time that will be applied when leaving the AIS Stabilization period. Range 0 to 3 seconds in … |
| 1.3.6.1.4.1.2544.1.12.19.1.6 | Tablef3Pwe3SatopTable | not-accessible | current | A list of entries corresponding to the PWE3 SAToP entities. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1 | Rowf3Pwe3SatopEntry | not-accessible | current | An entry containing information applicable to a particular PWE3 SAToP Entity. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.1 | Columnf3Pwe3SatopIndex | not-accessible | current | Unique index value associated with the SAToP Entity. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.2 | Columnf3Pwe3SatopAlias | read-create | current | This object allows SNMP management entities to provide an alias to the PWE3 SAToP entity. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.3 | Columnf3Pwe3SatopAdminState | read-write | current | This object represents the Administrative State of the PWE3 SAToP entity. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.4 | Columnf3Pwe3SatopOperationalState | read-only | current | This object represents the Operational State of the PWE3 SAToP entity. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.5 | Columnf3Pwe3SatopSecondaryState | read-only | current | This object represents the Secondary State of the PWE3 SAToP entity. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.6 | Columnf3Pwe3SatopTDMEntity | read-create | current | This object allows specification of the T1/E1 entity associated with the SAToP. This is only used at SATop creation time. Result of get operation on this objec… |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.7 | Columnf3Pwe3SatopDiscoveryType | read-create | current | This object allows ability to statically/dynamically determine the MAC address of the remote IP Address associated with the SAToP. In the case of static discov… |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.8 | Columnf3Pwe3SatopRemoteIpAddress | read-create | current | This object allows ability to specify the remote IP Address. This is used in the PWE payload. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.9 | Columnf3Pwe3SatopRemoteMacAddress | read-create | current | This object allows ability to specify the remote Layer 2 MAC Address. This must be specified in case of f3Pwe3SatopDiscoveryType as static. This is derived dyn… |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.10 | Columnf3Pwe3SatopEncapsulationType | read-create | current | This object allows ability to specify the encapsulation type of the SATop. It can be encapsulated with VLAN and single MPLS label(vlan-one-mpls-label), VLAN an… |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.11 | Columnf3Pwe3SatopRTPEnabled | read-create | current | This object enables/disables RTP header for this SATop instance. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.12 | Columnf3Pwe3SatopRTPUpdateFrequency | read-create | current | When f3Pwe3SatopRTPEnabled is true, this object allows specification of the RTP clock update frequency. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.13 | Columnf3Pwe3SatopControlWordEnabled | read-create | current | This object is used for 3rd party interoperability, since earlier versions of PWE do not support control-word. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.14 | Columnf3Pwe3SatopJitterBufferSize | read-create | current | This object allows definition of size of the jitter buffer in microseconds for this SATop instance. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.15 | Columnf3Pwe3SatopPayloadSize | read-create | current | This object allows specification of the SATop payload size. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.16 | Columnf3Pwe3SatopVlanId | read-create | current | This object allows specification of the SATop VLAN Id. Applicable for vlan based encapsulation types. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.17 | Columnf3Pwe3SatopVlanPriority | read-create | current | This object allows specification of the SATop VLAN Priority. Applicable for vlan based encapsulation types. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.18 | Columnf3Pwe3SatopRxMplsLabel1 | read-create | current | This object allows specification of the expected receive MPLS Label. Applicable for single MPLS label encapsulation type. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.19 | Columnf3Pwe3SatopRxMplsLabel2 | read-create | current | This object allows specification of the expected receive MPLS Label. Applicable for dual MPLS label encapsulation types. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.20 | Columnf3Pwe3SatopTxMplsLabel1 | read-create | current | This object allows specification of the transmitted MPLS Label, used for multiplexing. Applicable for single MPLS label encapsulation type. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.21 | Columnf3Pwe3SatopTxMplsLabel2 | read-create | current | This object allows specification of the transmitted MPLS Label, used for multiplexing. Applicable for dual MPLS label encapsulation type. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.22 | Columnf3Pwe3SatopAisStabilizationProfile | read-create | current | This object allows specification of the AIS stabilization Profile object. If no profile is associated, this value should be 0.0. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.23 | Columnf3Pwe3SatopResyncProfile | read-create | current | This object allows specification of the Resync Profile object. If no profile is associated, this value should be 0.0. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.24 | Columnf3Pwe3SatopLossProfile | read-create | current | This object allows specification of the Loss Profile object. If no profile is associated, this value should be 0.0. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.25 | Columnf3Pwe3SatopTransportMode | read-create | current | This object allows specification of the SATop transport mode. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.26 | Columnf3Pwe3SatopStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.19.1.6.1.27 | Columnf3Pwe3SatopRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.19.1.7 | Tablef3Pwe3SatopTDMEntitiesTable | not-accessible | current | A list of entries corresponding to the PWE3 SATop TDM entities . |
| 1.3.6.1.4.1.2544.1.12.19.1.7.1 | Rowf3Pwe3SatopTDMEntitiesEntry | not-accessible | current | An entry containing information applicable to a particular PWE3 SATop TDM entity. |
| 1.3.6.1.4.1.2544.1.12.19.1.7.1.1 | Columnf3Pwe3SatopTDMEntityIndex | not-accessible | current | Unique index value associated with the PWE3 SATOP TDM Entity. |
| 1.3.6.1.4.1.2544.1.12.19.1.7.1.2 | Columnf3Pwe3SatopTDMEntityObject | read-write | current | This object points to the PWE3 SATOP TDM Entity. This is OID of the actual T1/E1 interface. |
| 1.3.6.1.4.1.2544.1.12.19.1.7.1.3 | Columnf3Pwe3SatopTDMEntityStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.19.1.7.1.4 | Columnf3Pwe3SatopTDMEntityRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.19.2 | Nodef3Pwe3PerformanceObjects | |||
| 1.3.6.1.4.1.2544.1.12.19.2.1 | Tablef3Pwe3SatopStatsTable | not-accessible | current | The PWE3 SATop Current data. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1 | Rowf3Pwe3SatopStatsEntry | not-accessible | current | A conceptual row in the f3Pwe3SatopStatsTable. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.1 | Columnf3Pwe3SatopStatsIndex | not-accessible | current | An index of the SATop current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.2 | Columnf3Pwe3SatopStatsIntervalType | read-only | current | Indicates the type of collection, i.e. whether it is 15 Min, 1 Day. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.3 | Columnf3Pwe3SatopStatsValid | read-only | current | Indicates the validity of the bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.4 | Columnf3Pwe3SatopStatsAction | read-write | current | Allows the Manager to clear the bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.5 | Columnf3Pwe3SatopStatsESs | read-only | current | The counter associated with the number of Errored Seconds encountered by the SATop in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.6 | Columnf3Pwe3SatopStatsSESs | read-only | current | The counter associated with the number of Severely Errored Seconds encountered by the SATop in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.7 | Columnf3Pwe3SatopStatsEBs | read-only | current | The counter associated with the number of Errored Blocsk encountered by the SATop in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.8 | Columnf3Pwe3SatopStatsResyncs | read-only | current | The counter associated with the number of Resync count events encountered by the SATop in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.9 | Columnf3Pwe3SatopStatsMaxJitter | read-only | current | The maximum absolute jitter on SATop in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.10 | Columnf3Pwe3SatopStatsFramesTx | read-only | current | The counter associated with the number of Frames Transmitted in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.11 | Columnf3Pwe3SatopStatsPayloadOctetsTx | read-only | current | The counter associated with the number of Payload Octets Transmitted in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.12 | Columnf3Pwe3SatopStatsFramesRx | read-only | current | The counter associated with the number of Frames Received in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.13 | Columnf3Pwe3SatopStatsPayloadOctetsRx | read-only | current | The counter associated with the number of Payload Octets Received in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.14 | Columnf3Pwe3SatopStatsOutOfSeqFramesRx | read-only | current | The counter associated with the number of Out of Sequence Frames Received in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.15 | Columnf3Pwe3SatopStatsLostFrames | read-only | current | The counter associated with the number of Lost Frames detected in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.16 | Columnf3Pwe3SatopStatsLostFramesStateTrans | read-only | current | The counter associated with the number of transitions to Lost Frame State detected in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.17 | Columnf3Pwe3SatopStatsMalformedFramesRx | read-only | current | The counter associated with the number of Malformed Frames received in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.1.1.18 | Columnf3Pwe3SatopStatsJitterBufferLateFrames | read-only | current | The counter associated with the number of Jitter Buffer Late Frames in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2 | Tablef3Pwe3SatopHistoryTable | not-accessible | current | The PWE3 SATop History data. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1 | Rowf3Pwe3SatopHistoryEntry | not-accessible | current | A conceptual row in the f3Pwe3SatopHistoryTable. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.1 | Columnf3Pwe3SatopHistoryIndex | not-accessible | current | An index of the SATop current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.2 | Columnf3Pwe3SatopHistoryTime | read-only | current | Indicates the time of history bin creation. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.3 | Columnf3Pwe3SatopHistoryValid | read-only | current | Indicates the validity of the bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.4 | Columnf3Pwe3SatopHistoryAction | read-write | current | Allows the Manager to clear the bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.5 | Columnf3Pwe3SatopHistoryESs | read-only | current | The counter associated with the number of Errored Seconds encountered by the SATop in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.6 | Columnf3Pwe3SatopHistorySESs | read-only | current | The counter associated with the number of Severely Errored Seconds encountered by the SATop in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.7 | Columnf3Pwe3SatopHistoryEBs | read-only | current | The counter associated with the number of Errored Blocsk encountered by the SATop in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.8 | Columnf3Pwe3SatopHistoryResyncs | read-only | current | The counter associated with the number of Resync count events encountered by the SATop in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.9 | Columnf3Pwe3SatopHistoryMaxJitter | read-only | current | The maximum absolute jitter on SATop in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.10 | Columnf3Pwe3SatopHistoryFramesTx | read-only | current | The counter associated with the number of Frames Transmitted in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.11 | Columnf3Pwe3SatopHistoryPayloadOctetsTx | read-only | current | The counter associated with the number of Payload Octets Transmitted in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.12 | Columnf3Pwe3SatopHistoryFramesRx | read-only | current | The counter associated with the number of Frames Received in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.13 | Columnf3Pwe3SatopHistoryPayloadOctetsRx | read-only | current | The counter associated with the number of Payload Octets Received in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.14 | Columnf3Pwe3SatopHistoryOutOfSeqFramesRx | read-only | current | The counter associated with the number of Out of Sequence Frames Received in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.15 | Columnf3Pwe3SatopHistoryLostFrames | read-only | current | The counter associated with the number of Lost Frames detected in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.16 | Columnf3Pwe3SatopHistoryLostFramesStateTrans | read-only | current | The counter associated with the number of transitions to Lost Frame State detected in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.17 | Columnf3Pwe3SatopHistoryMalformedFramesRx | read-only | current | The counter associated with the number of Malformed Frames received in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.2.1.18 | Columnf3Pwe3SatopHistoryJitterBufferLateFrames | read-only | current | The counter associated with the number of Jitter Buffer Overruns in the current bin. |
| 1.3.6.1.4.1.2544.1.12.19.2.3 | Tablef3Pwe3SatopThresholdTable | not-accessible | current | A table of entries that allow manageability of SATop Thresholds. |
| 1.3.6.1.4.1.2544.1.12.19.2.3.1 | Rowf3Pwe3SatopThresholdEntry | not-accessible | current | A conceptual row in the f3Pwe3SatopThresholdTable. |
| 1.3.6.1.4.1.2544.1.12.19.2.3.1.1 | Columnf3Pwe3SatopThresholdIndex | not-accessible | current | An index that uniquely identifies an entry in the f3Pwe3SatopThresholdTable. |
| 1.3.6.1.4.1.2544.1.12.19.2.3.1.2 | Columnf3Pwe3SatopThresholdInterval | read-only | current | The interval over which monitored value is sampled and compared with the specified threshold. |
| 1.3.6.1.4.1.2544.1.12.19.2.3.1.3 | Columnf3Pwe3SatopThresholdVariable | read-only | current | The object identifier of the particular variable to be sampled. |
| 1.3.6.1.4.1.2544.1.12.19.2.3.1.4 | Columnf3Pwe3SatopThresholdValueLo | read-write | current | Lower 32 bits of the threshold value. |
| 1.3.6.1.4.1.2544.1.12.19.2.3.1.5 | Columnf3Pwe3SatopThresholdValueHi | read-write | current | Higher 32 bits of the threshold value. |
| 1.3.6.1.4.1.2544.1.12.19.2.3.1.6 | Columnf3Pwe3SatopThresholdMonValue | read-only | current | Monitored value corresponding to f3Pwe3SatopThresholdVariable. |
| 1.3.6.1.4.1.2544.1.12.19.3 | Nodef3Pwe3PerformanceNotifications | |||
| 1.3.6.1.4.1.2544.1.12.19.3.1 | Notificationf3Pwe3SatopThresholdCrossingAlert | current | This trap is sent each time a threshold on a PM condition on an PWE3 SATop is crossed. | |
| 1.3.6.1.4.1.2544.1.12.19.4 | Nodef3Pwe3Conformance | |||
| 1.3.6.1.4.1.2544.1.12.19.4.1 | Nodef3Pwe3Compliances | |||
| 1.3.6.1.4.1.2544.1.12.19.4.1.1 | Compliancef3Pwe3Compliance | current | Describes the requirements for conformance to the F3 PWE3 group. | |
| 1.3.6.1.4.1.2544.1.12.19.4.2 | Nodef3Pwe3Groups | |||
| 1.3.6.1.4.1.2544.1.12.19.4.2.1 | Groupf3Pwe3ObjectGroup | current | A collection of objects used to manage the F3 PWE3 Configuration data. | |
| 1.3.6.1.4.1.2544.1.12.19.4.2.2 | Groupf3Pwe3PerfObjectGroup | current | A collection of objects used to manage the F3 PWE3 Performance data. | |
| 1.3.6.1.4.1.2544.1.12.19.4.2.3 | Groupf3Pwe3PerfNotifGroup | current | A collection of notifications related to F3 PWE3 Threshold Crossing Alerts. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MplsLabel | Unsigned32 | current | Definition of MPLS Label. The bits in network order (left-to-right) are, Label(20-bits):QOS(3-bits):Bottom-of-Stack(1-bit):TTL(8-bits) These constitute the 32-bit unsigned integer. |
| PWE3SatopDiscoveryType | INTEGER { dynamic(1), static(2) } | current | Enumerations for PWE3 SATop Discovery Type. |
| PWE3SatopEncapsulationType | INTEGER { vlan-one-mpls-label(1), vlan-two-mpls-label(2), novlan-two-mpls-label(3) } | current | Enumerations for PWE3 SATop Encapsulation Type. |
| PWE3SatopRTPTSUpdateFreqType | INTEGER { freq-8kHz (1), freq-16kHz (2), freq-32kHz (3), freq-64kHz (4), freq-128kHz (5), freq-256kHz (6), freq-512kHz (7), freq-1024kHz (8) } | current | Enumerations for PWE3 SATop RTP Update Frequency. |
| PWE3SatopTransportMode | INTEGER { satop-e1 (1), satop-t1 (2), satop-octetalignt1 (3) } | current | Enumerations for PWE3 SATop Transport Mode. |