F3-SYNCJACK-MIB
378 objects
This module defines the Sync Jack MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Imported Objects
| ADVA-MIB | fsp150cm |
| CM-COMMON-MIB | AdminState CmPmBinAction CmPmIntervalType IpPriorityMapMode IpVersion OperationalState PerfCounter32 PerfCounter64 SchedActivityStatus ScheduleType SecondaryState |
| CM-ENTITY-MIB | neIndex shelfIndex slotIndex |
| F3-PTP-MIB | ScaledNanoseconds |
| F3-SYNC-MIB | SSMQualityLevel |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus StorageType TEXTUAL-CONVENTION TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.12.22 | Identityf3SyncJMIB | This module defines the Sync Jack MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||
| 1.3.6.1.4.1.2544.1.12.22.1 | Nodef3SyncJConfigObjects | |||
| 1.3.6.1.4.1.2544.1.12.22.1.1 | Tablef3SyncJClockProbeTable | not-accessible | current | A list of entries corresponding to the SyncJack Clock Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1 | Rowf3SyncJClockProbeEntry | not-accessible | current | An entry containing information applicable to a particular SyncJack Clock Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.1 | Columnf3SyncJClockProbeIndex | not-accessible | current | Unique index value associated with the Clock Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.2 | Columnf3SyncJClockProbeName | read-create | current | This object allows SNMP management entities to provide a name to the Clock Probe entity. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.3 | Columnf3SyncJClockProbeSource | read-write | current | This object allows setting up of the TIE Source Entity. Clock Probe compares this with the f3SyncJClockProbeReference and computes TIE, MTIE. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.4 | Columnf3SyncJClockProbeReference | read-write | current | This object allows setting up of the TIE Reference Entity. Clock Probe compares this with the f3SyncJClockProbeSource and computes TIE, MTIE. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.5 | Columnf3SyncJClockProbeExpectedQL | read-write | current | This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.6 | Columnf3SyncJClockProbeSourceType | read-create | current | This object represents the Clock Probe source type. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.7 | Columnf3SyncJClockProbeMeasurementRate | read-only | current | This object represents the actual Clock Probe measurement rate. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.8 | Columnf3SyncJClockProbeMTIEMaskType | read-write | current | This object represents the MTIE Mask Type. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.9 | Columnf3SyncJClockProbeMTIEMaskMargin | read-write | current | This object specifies the MTIE Mask Margin in percentage below the MTIE mask for alarm report. Value of 0 means no margin. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.10 | Columnf3SyncJClockProbeScheduler | read-only | current | This object provides the associated scheduler instance, if one exists, with this Clock Probe. This value is 0.0, if there is no scheduler associated with the C… |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.11 | Columnf3SyncJClockProbeTestState | read-only | current | This object provides the Clock Probe test state. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.12 | Columnf3SyncJClockProbeLastTIEResult | read-only | current | This object provides last TIE result in nanoseconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.13 | Columnf3SyncJClockProbeLastTIEResultTime | read-only | current | This object provides the time associated with the last TIE result. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.14 | Columnf3SyncJClockProbeSourceFailure | read-only | current | This object provides information on whether the source failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.15 | Columnf3SyncJClockProbeReferenceFailure | read-only | current | This object provides information on whether the reference failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.16 | Columnf3SyncJClockProbeActualTestStartTime | read-only | current | This object provides information on the actual test start time. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.17 | Columnf3SyncJClockProbeActualTestDuration | read-only | current | This object provides information on the actual test duration in seconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.18 | Columnf3SyncJClockProbeMTIEMaskCrossedTime | read-only | current | This object provides the time when the MTIE mask was crossed. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.19 | Columnf3SyncJClockProbeMTIEMaskMarginCrossedTime | read-only | current | This object provides the time when the MTIE mask margin was crossed. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.20 | Columnf3SyncJClockProbeStatusMTIEMaskFailed | read-only | current | This object provides the result status, whether MTIE Mask has failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.21 | Columnf3SyncJClockProbeStatusMTIEMarginFailed | read-only | current | This object provides the result status, whether MTIE Margin has failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.22 | Columnf3SyncJClockProbeStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.23 | Columnf3SyncJClockProbeRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.24 | Columnf3SyncJClockProbeFfoTarget | read-write | current | The FFO target for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.25 | Columnf3SyncJClockProbeFfoObserWindow | read-write | current | The FFO obserwer window for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.26 | Columnf3SyncJClockProbeLastFFOResult | read-only | current | The last FFO result for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.27 | Columnf3SyncJClockProbeTimeOfLastFFOResult | read-only | current | The time of last FFO result for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.28 | Columnf3SyncJClockProbeRawDataCollectionEnabled | read-write | current | The raw data collection enabled for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.29 | Columnf3SyncJClockProbeTeAlertThreshold | read-write | deprecated | The TE alert threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.30 | Columnf3SyncJClockProbeTeAlertClearThreshold | read-write | deprecated | The TE alert clear threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.31 | Columnf3SyncJClockProbeLastTEAlertTime | read-only | deprecated | The last TE alert time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.32 | Columnf3SyncJClockProbeLastTEAlertClearTime | read-only | deprecated | The last TE alert clear time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.33 | Columnf3SyncJClockProbeRunningFailedCount | read-only | current | The running failed count for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.34 | Columnf3SyncJClockProbeMeasurementType | read-write | current | The measurement type configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.35 | Columnf3SyncJClockProbeConstTEThreshold | read-write | current | The Constant Time Error Alert threshold (ns). |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.36 | Columnf3SyncJClockProbeConstTEClrThreshold | read-write | current | The Constant Time Error Alert Clear threshold (ns). |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.37 | Columnf3SyncJClockProbeConstTEWindow | read-write | current | The Averaging window used for Constant TE calculation (sec). |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.38 | Columnf3SyncJClockProbeMaxTETotAlarmTime | read-only | current | The Total time in seconds Max TE has been measured |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.39 | Columnf3SyncJClockProbeConstTETotAlarmTime | read-only | current | The Total time in seconds Constant TE has been measured. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.40 | Columnf3SyncJClockProbeConstTEMeasurementTime | read-only | current | The Const TE Measurement Time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.41 | Columnf3SyncJClockProbeMaxTEMeasurementTime | read-only | current | The Max TE Measurement Time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.42 | Columnf3SyncJClockProbeMaxTEThreshold | read-write | current | The TE Max threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.1.1.43 | Columnf3SyncJClockProbeMaxTEClrThreshold | read-write | current | The TE Max clear threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.2 | Tablef3SyncJClockProbeMTIEValueTable | not-accessible | current | A list of entries corresponding to the Clock Probe's MTIE Result Values. |
| 1.3.6.1.4.1.2544.1.12.22.1.2.1 | Rowf3SyncJClockProbeMTIEValueEntry | not-accessible | current | An entry containing information applicable to a particular Clock Probe's MTIE Result Value. |
| 1.3.6.1.4.1.2544.1.12.22.1.2.1.1 | Columnf3SyncJClockProbeMTIEValueIndex | not-accessible | current | Unique index value associated with the Clock Probe Result Value. |
| 1.3.6.1.4.1.2544.1.12.22.1.2.1.2 | Columnf3SyncJClockProbeMTIEValue | read-only | current | This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.3 | Tablef3SyncJClockProbeResHistoryTable | not-accessible | current | A list of entries corresponding to the SyncJack Clock Probe Result History. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1 | Rowf3SyncJClockProbeResHistoryEntry | not-accessible | current | An entry containing information applicable to a particular SyncJack Clock Probe Result History. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.1 | Columnf3SyncJClockProbeResHistoryIndex | not-accessible | current | Unique index value associated with the Clock Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.2 | Columnf3SyncJClockProbeResHistoryAlias | read-write | current | This object provides alias of the Clock Probe result history. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.3 | Columnf3SyncJClockProbeResHistorySource | read-only | current | This object provides the source for TIE computation. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.4 | Columnf3SyncJClockProbeResHistoryReference | read-only | current | This object provides the reference for TIE computation. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.5 | Columnf3SyncJClockProbeResHistoryExpectedQL | read-only | current | This object provides the minimum expected Quality Level when bits-in and sync-e PHY are references. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.6 | Columnf3SyncJClockProbeResHistorySourceType | read-only | current | This object provides the Clock Probe source type. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.7 | Columnf3SyncJClockProbeResHistoryMeasurementRate | read-only | current | This object provides the actual Clock Probe measurement rate. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.8 | Columnf3SyncJClockProbeResHistoryMTIEMaskType | read-only | current | This object provides the MTIE Mask Type. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.9 | Columnf3SyncJClockProbeResHistoryMTIEMaskMargin | read-only | current | This object provides the MTIE Mask Margin. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.10 | Columnf3SyncJClockProbeResHistorySourceFailure | read-only | current | This object provides information on whether the source failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.11 | Columnf3SyncJClockProbeResHistoryReferenceFailure | read-only | current | This object provides information on whether the reference failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.12 | Columnf3SyncJClockProbeResHistoryActualTestStartTime | read-only | current | This object provides information on the actual test start time. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.13 | Columnf3SyncJClockProbeResHistoryActualTestDuration | read-only | current | This object provides information on the actual test duration in seconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.14 | Columnf3SyncJClockProbeResHistoryMTIEMaskCrossedTime | read-only | current | This object provides the time when the MTIE mask was crossed. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.15 | Columnf3SyncJClockProbeResHistoryMTIEMaskMarginCrossedTime | read-only | current | This object provides the time when the MTIE mask margin was crossed. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.16 | Columnf3SyncJClockProbeResHistoryStatusMTIEMaskFailed | read-only | current | This object provides the result status, whether MTIE Mask has failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.17 | Columnf3SyncJClockProbeResHistoryStatusMTIEMarginFailed | read-only | current | This object provides the result status, whether MTIE Margin has failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.18 | Columnf3SyncJClockProbeResHistoryStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.19 | Columnf3SyncJClockProbeResHistoryRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.20 | Columnf3SyncJClockProbeResHistoryMinFFO | read-only | current | The Min FFO configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.21 | Columnf3SyncJClockProbeResHistoryMaxFFO | read-only | current | The Max FFO configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.22 | Columnf3SyncJClockProbeResHistoryAvgFFO | read-only | current | The average FFO configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.23 | Columnf3SyncJClockProbeResHistoryOutOfTargetFFOTime | read-only | current | The out of target FFO time configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.24 | Columnf3SyncJClockProbeResHistoryTotalFFOTime | read-only | current | The total FFO time configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.25 | Columnf3SyncJClockProbeResHistoryMinPhaseOffset | read-only | current | The Min phase offset configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.26 | Columnf3SyncJClockProbeResHistoryMaxPhaseOffset | read-only | current | The Max phase offset configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.27 | Columnf3SyncJClockProbeResHistoryAvgPhaseOffset | read-only | current | The average phase offset configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.28 | Columnf3SyncJClockProbeResHistoryOutOfTargetPhaseOffsetTime | read-only | current | The out of target phase offset time configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.29 | Columnf3SyncJClockProbeResHistoryTotalPhaseOffsetTime | read-only | current | The total phase offset time configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.30 | Columnf3SyncJClockProbeResHistoryMeasurementType | read-only | current | The measurement type configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.31 | Columnf3SyncJClockProbeResHistoryTeAlertThreshold | read-only | deprecated | The TE alert threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.32 | Columnf3SyncJClockProbeResHistoryTeAlertClearThreshold | read-only | deprecated | The TE alert clear threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.33 | Columnf3SyncJClockProbeResHistoryLastTEAlertTime | read-only | deprecated | The last TE alert time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.34 | Columnf3SyncJClockProbeResHistoryLastTEAlertClearTime | read-only | deprecated | The last TE alert clear time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.35 | Columnf3SyncJClockProbeResHistoryRunningFailedCount | read-only | current | The running failed count for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.36 | Columnf3SyncJClockProbeResHistoryConstTEThreshold | read-only | current | The Constant Time Error Alert threshold (ns). |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.37 | Columnf3SyncJClockProbeResHistoryConstTEClrThreshold | read-only | current | The Constant Time Error Alert Clear threshold (ns). |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.38 | Columnf3SyncJClockProbeResHistoryConstTEWindow | read-only | current | The Averaging window used for Constant TE calculation (sec). |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.39 | Columnf3SyncJClockProbeResHistoryMaxTETotAlarmTime | read-only | current | The Total time in seconds Max TE has been measured |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.40 | Columnf3SyncJClockProbeResHistoryConstTETotAlarmTime | read-only | current | The Total time in seconds Constant TE has been measured. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.41 | Columnf3SyncJClockProbeResHistoryConstTEMeasurementTime | read-only | current | The Const TE Measurement Time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.42 | Columnf3SyncJClockProbeResHistoryMaxTEMeasurementTime | read-only | current | The Max TE Measurement Time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.43 | Columnf3SyncJClockProbeResHistoryMaxTEThreshold | read-write | current | The TE Max threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.3.1.44 | Columnf3SyncJClockProbeResHistoryMaxTEClrThreshold | read-write | current | The TE Max clear threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.4 | Tablef3SyncJClockProbeResHistoryMTIEValueTable | not-accessible | current | A list of histgory entries corresponding to the Clock Probe's MTIE Result Values. |
| 1.3.6.1.4.1.2544.1.12.22.1.4.1 | Rowf3SyncJClockProbeResHistoryMTIEValueEntry | not-accessible | current | An entry containing information applicable to a particular Clock Probe's MTIE Result Value. |
| 1.3.6.1.4.1.2544.1.12.22.1.4.1.1 | Columnf3SyncJClockProbeResHistoryMTIEValueIndex | not-accessible | current | Unique index value associated with the Clock Probe History Result Value. |
| 1.3.6.1.4.1.2544.1.12.22.1.4.1.2 | Columnf3SyncJClockProbeResHistoryMTIEValue | read-only | current | This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.5 | Tablef3SyncJPTPClockProbeTable | not-accessible | current | A list of entries corresponding to the SyncJack PTP Clock Probes. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1 | Rowf3SyncJPTPClockProbeEntry | not-accessible | current | An entry containing information applicable to a particular SyncJack PTP Clock Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.1 | Columnf3SyncJPTPClockProbeIndex | not-accessible | current | Unique index value associated with the PTP Clock Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.2 | Columnf3SyncJPTPClockProbeName | read-create | current | This object allows SNMP management entities to provide an name to the PTP Clock Probe entity. This is used for creation of the underlying IP Interface associat… |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.3 | Columnf3SyncJPTPClockProbeMeasurementDirection | read-write | current | This object allows SNMP management entities to specify the Measurement Direction to the PTP Clock Probe entity. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.4 | Columnf3SyncJPTPClockProbePTPFlowPoint | read-create | current | This object allows SNMP management entities to specify the PTP Flow Point to use as source for PTP Clock Probe measurements. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.5 | Columnf3SyncJPTPClockProbeIpPrototocol | read-write | current | This object allows SNMP management entities to specify the IP Protocol used for PTP communication. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.6 | Columnf3SyncJPTPClockProbeSlaveIpV4Address | read-write | current | This object allows SNMP management entities to specify the Slave IP Address associated with the PTP Clock Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.7 | Columnf3SyncJPTPClockProbeMasterIpV4Address | read-write | current | This object allows SNMP management entities to specify the Master IP Address associated with the PTP Clock Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.8 | Columnf3SyncJPTPClockProbeReference | read-write | current | This object allows setting up of the PTP Clock Probe TIE Reference Entity. PTP Clock Probe compares this with the PTP Master/Slave entity configured using f3Sy… |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.9 | Columnf3SyncJPTPClockProbeExpectedQL | read-write | current | This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.10 | Columnf3SyncJPTPClockProbeMTIEMaskType | read-write | current | This object represents the MTIE Mask Type. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.11 | Columnf3SyncJPTPClockProbeMTIEMaskMargin | read-write | current | This object represents the MTIE Mask Margin. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.12 | Columnf3SyncJPTPClockProbeScheduler | read-only | current | This object provides the associated scheduler instance, if one exists, with this PTP Clock Probe. This value is 0.0, if there is no scheduler associated with t… |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.13 | Columnf3SyncJPTPClockProbeTestState | read-only | current | This object provides the PTP Clock Probe test state. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.14 | Columnf3SyncJPTPClockProbeLastTIEResult | read-only | current | This object provides last TIE result in nanoseconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.15 | Columnf3SyncJPTPClockProbeLastTIEResultTime | read-only | current | This object provides the time associated with the last TIE result. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.16 | Columnf3SyncJPTPClockProbeNoTimestampFailure | read-only | current | This object provides information on whether the measured PTP source indicated a no-timestamp failure. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.17 | Columnf3SyncJPTPClockProbeNoEventMessageFailure | read-only | current | This object provides information on whether the measured PTP source indicated a no-event message failure. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.18 | Columnf3SyncJPTPClockProbeReferenceFailure | read-only | current | This object provides information on whether the reference failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.19 | Columnf3SyncJPTPClockProbeActualTestStartTime | read-only | current | This object provides information on the actual test start time. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.20 | Columnf3SyncJPTPClockProbeActualTestDuration | read-only | current | This object provides information on the actual test duration in seconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.21 | Columnf3SyncJPTPClockProbeMTIEMaskCrossedTime | read-only | current | This object provides the time when the MTIE mask was crossed. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.22 | Columnf3SyncJPTPClockProbeMTIEMaskMarginCrossedTime | read-only | current | This object provides the time when the MTIE mask margin was crossed. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.23 | Columnf3SyncJPTPClockProbeStatusMTIEMaskFailed | read-only | current | This object provides the result status, whether MTIE Mask has failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.24 | Columnf3SyncJPTPClockProbeStatusMTIEMarginFailed | read-only | current | This object provides the result status, whether MTIE Margin has failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.25 | Columnf3SyncJPTPClockProbeStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.26 | Columnf3SyncJPTPClockProbeRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.27 | Columnf3SyncJPTPClockProbeFfoTarget | read-write | current | The FFO target for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.28 | Columnf3SyncJPTPClockProbeFfoObserWindow | read-write | current | The FFO obserwer window for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.29 | Columnf3SyncJPTPClockProbeLastFFOResult | read-only | current | The last FFO result for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.30 | Columnf3SyncJPTPClockProbeTimeOfLastFFOResult | read-only | current | The time of last FFO result for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.31 | Columnf3SyncJPTPClockProbeRawDataCollectionEnabled | read-write | current | The raw data collection enabled for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.32 | Columnf3SyncJPTPClockProbeTeAlertThreshold | read-write | deprecated | The TE alert threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.33 | Columnf3SyncJPTPClockProbeTeAlertClearThreshold | read-write | deprecated | The TE alert clear threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.34 | Columnf3SyncJPTPClockProbeLastTEAlertTime | read-only | deprecated | The last TE alert time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.35 | Columnf3SyncJPTPClockProbeLastTEAlertClearTime | read-only | deprecated | The last TE alert clear time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.36 | Columnf3SyncJPTPClockProbeRunningFailedCount | read-only | current | The running failed count for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.37 | Columnf3SyncJPTPClockProbeMeasurementType | read-write | current | The measurement type configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.38 | Columnf3SyncJPTPClockProbeDelayMS | read-write | deprecated | The delay MS for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.39 | Columnf3SyncJPTPClockProbeDelaySM | read-write | deprecated | The delay SM for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.40 | Columnf3SyncJPTPClockProbeTAsymmetry | read-write | deprecated | The Slave to Master Delay Asymmetry configured for this entity. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.41 | Columnf3SyncJPTPClockProbeDelayCompensation | read-write | current | The Delay Compensation configured for this entity. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.42 | Columnf3SyncJPTPClockProbeConstTEThreshold | read-write | current | The Constant Time Error Alert threshold (ns). |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.43 | Columnf3SyncJPTPClockProbeConstTEClrThreshold | read-write | current | The Constant Time Error Alert Clear threshold (ns). |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.44 | Columnf3SyncJPTPClockProbeConstTEWindow | read-write | current | The Averaging window used for Constant TE calculation (sec). |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.45 | Columnf3SyncJPTPClockProbeInstTEThreshold | read-write | current | The Instant Time Error Alert threshold (ns). |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.46 | Columnf3SyncJPTPClockProbeInstTEClrThreshold | read-write | current | The Instant Time Error Alert Clear threshold (ns). |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.47 | Columnf3SyncJPTPClockProbeMaxTETotAlarmTime | read-only | current | The Total time in seconds Max TE has been measured |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.48 | Columnf3SyncJPTPClockProbeConstTETotAlarmTime | read-only | current | The Total time in seconds Constant TE has been measured. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.49 | Columnf3SyncJPTPClockProbeInstTETotAlarmTime | read-only | current | The Total time in seconds Instant TE has been measured. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.50 | Columnf3SyncJPTPClockProbeSlavePortIdentity | read-write | current | The Tested Slave Port Identity. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.51 | Columnf3SyncJPTPClockProbeMasterPortIdentity | read-write | current | The Tested Master Port Identity. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.52 | Columnf3SyncJPTPClockProbeConstTEMeasurementTime | read-only | current | The Const TE Measurement Time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.53 | Columnf3SyncJPTPClockProbeMaxTEMeasurementTime | read-only | current | The Max TE Measurement Time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.54 | Columnf3SyncJPTPClockProbeInstTEMeasurementTime | read-only | current | The Inst TE Measurement Time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.55 | Columnf3SyncJPTPClockProbeMaxTEThreshold | read-write | current | The TE Max threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.5.1.56 | Columnf3SyncJPTPClockProbeMaxTEClrThreshold | read-write | current | The TE Max clear threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.6 | Tablef3SyncJPTPClockProbeMTIEValueTable | not-accessible | current | A list of entries corresponding to the PTP Clock Probe's MTIE Result Values. |
| 1.3.6.1.4.1.2544.1.12.22.1.6.1 | Rowf3SyncJPTPClockProbeMTIEValueEntry | not-accessible | current | An entry containing information applicable to a particular PTP Clock Probe's MTIE Result Value. |
| 1.3.6.1.4.1.2544.1.12.22.1.6.1.1 | Columnf3SyncJPTPClockProbeMTIEValueIndex | not-accessible | current | Unique index value associated with the PTP Clock Probe Result Value. |
| 1.3.6.1.4.1.2544.1.12.22.1.6.1.2 | Columnf3SyncJPTPClockProbeMTIEValue | read-only | current | This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.7 | Tablef3SyncJPTPClockProbeResHistoryTable | not-accessible | current | A list of entries corresponding to the SyncJack PTP Clock Probe Result History. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1 | Rowf3SyncJPTPClockProbeResHistoryEntry | not-accessible | current | An entry containing information applicable to a particular SyncJack PTP Clock Probe Result History. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.1 | Columnf3SyncJPTPClockProbeResHistoryIndex | not-accessible | current | Unique index value associated with the PTP Clock Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.2 | Columnf3SyncJPTPClockProbeResHistoryAlias | read-write | current | This object provides alias of the PTP Clock Probe result history. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.3 | Columnf3SyncJPTPClockProbeResHistoryMeasurementDirection | read-only | current | This object specifies the Measurement Direction to the PTP Clock Probe entity. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.4 | Columnf3SyncJPTPClockProbeResHistoryPTPFlowPoint | read-only | current | This object indicates the PTP Flow Point used as source for PTP Clock Probe measurements. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.5 | Columnf3SyncJPTPClockProbeResHistoryIpPrototocol | read-only | current | This object indicates the IP Protocol used for PTP communication. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.6 | Columnf3SyncJPTPClockProbeResHistorySlaveIpV4Address | read-only | current | This object indicates the Slave IP Address associated with the PTP Clock Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.7 | Columnf3SyncJPTPClockProbeResHistoryMasterIpV4Address | read-only | current | This object indicates the Master IP Address associated with the PTP Clock Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.8 | Columnf3SyncJPTPClockProbeResHistoryReference | read-only | current | This object indicates the PTP Clock Probe PTP Clock Probe Entity. PTP Clock Probe compares this with the PTP Master/Slave entity configured using f3SyncJPTPClo… |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.9 | Columnf3SyncJPTPClockProbeResHistoryExpectedQL | read-only | current | This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.10 | Columnf3SyncJPTPClockProbeResHistoryMTIEMaskType | read-only | current | This object represents the MTIE Mask Type. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.11 | Columnf3SyncJPTPClockProbeResHistoryMTIEMaskMargin | read-only | current | This object represents the MTIE Mask Margin. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.12 | Columnf3SyncJPTPClockProbeResHistoryNoTimestampFailure | read-only | current | This object provides information on whether the measured PTP source indicated a no-timestamp failure. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.13 | Columnf3SyncJPTPClockProbeResHistoryNoEventMessageFailure | read-only | current | This object provides information on whether the measured PTP source indicated a no-event message failure. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.14 | Columnf3SyncJPTPClockProbeResHistoryReferenceFailure | read-only | current | This object provides information on whether the reference failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.15 | Columnf3SyncJPTPClockProbeResHistoryActualTestStartTime | read-only | current | This object provides the time when the actual test was started. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.16 | Columnf3SyncJPTPClockProbeResHistoryActualTestDuration | read-only | current | This object provides information on the actual test duration in seconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.17 | Columnf3SyncJPTPClockProbeResHistoryMTIEMaskCrossedTime | read-only | current | This object provides the time when the MTIE mask was crossed. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.18 | Columnf3SyncJPTPClockProbeResHistoryMTIEMaskMarginCrossedTime | read-only | current | This object provides the time when the MTIE mask margin was crossed. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.19 | Columnf3SyncJPTPClockProbeResHistoryStatusMTIEMaskFailed | read-only | current | This object provides the result status, whether MTIE Mask has failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.20 | Columnf3SyncJPTPClockProbeResHistoryStatusMTIEMarginFailed | read-only | current | This object provides the result status, whether MTIE Margin has failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.21 | Columnf3SyncJPTPClockProbeResHistoryStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.22 | Columnf3SyncJPTPClockProbeResHistoryRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.23 | Columnf3SyncJPTPClockProbeResHistoryMinFFO | read-only | current | The Min FFO configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.24 | Columnf3SyncJPTPClockProbeResHistoryMaxFFO | read-only | current | The Max FFO configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.25 | Columnf3SyncJPTPClockProbeResHistoryAvgFFO | read-only | current | The average FFO configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.26 | Columnf3SyncJPTPClockProbeResHistoryOutOfTargetFFOTime | read-only | current | The out of target FFO time configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.27 | Columnf3SyncJPTPClockProbeResHistoryTotalFFOTime | read-only | current | The total FFO time configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.28 | Columnf3SyncJPTPClockProbeResHistoryMinPhaseOffset | read-only | current | The Min phase offset configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.29 | Columnf3SyncJPTPClockProbeResHistoryMaxPhaseOffset | read-only | current | The Max phase offset configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.30 | Columnf3SyncJPTPClockProbeResHistoryAvgPhaseOffset | read-only | current | The average phase offset configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.31 | Columnf3SyncJPTPClockProbeResHistoryOutOfTargetPhaseOffsetTime | read-only | current | The out of target phase offset time configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.32 | Columnf3SyncJPTPClockProbeResHistoryTotalPhaseOffsetTime | read-only | current | The total phase offset time configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.33 | Columnf3SyncJPTPClockProbeResHistoryTeAlertThreshold | read-only | deprecated | The TE alert threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.34 | Columnf3SyncJPTPClockProbeResHistoryTeAlertClearThreshold | read-only | deprecated | The TE alert clear threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.35 | Columnf3SyncJPTPClockProbeResHistoryLastTEAlertTime | read-only | deprecated | The last TE alert time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.36 | Columnf3SyncJPTPClockProbeResHistoryLastTEAlertClearTime | read-only | deprecated | The last TE alert clear time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.37 | Columnf3SyncJPTPClockProbeResHistoryRunningFailedCount | read-only | current | The running failed count for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.38 | Columnf3SyncJPTPClockProbeResHistoryMeasurementType | read-only | current | The measurement type configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.39 | Columnf3SyncJPTPClockProbeResHistoryConstTEThreshold | read-only | current | The Constant Time Error Alert threshold (ns). |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.40 | Columnf3SyncJPTPClockProbeResHistoryConstTEClrThreshold | read-only | current | The Constant Time Error Alert Clear threshold (ns). |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.41 | Columnf3SyncJPTPClockProbeResHistoryConstTEWindow | read-only | current | The Averaging window used for Constant TE calculation (sec). |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.42 | Columnf3SyncJPTPClockProbeResHistoryInstTEThreshold | read-only | current | The Instant Time Error Alert threshold (ns). |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.43 | Columnf3SyncJPTPClockProbeResHistoryInstTEClrThreshold | read-only | current | The Instant Time Error Alert Clear threshold (ns). |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.44 | Columnf3SyncJPTPClockProbeResHistoryMaxTETotAlarmTime | read-only | current | The Total time in seconds Max TE has been measured |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.45 | Columnf3SyncJPTPClockProbeResHistoryConstTETotAlarmTime | read-only | current | The Total time in seconds Constant TE has been measured. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.46 | Columnf3SyncJPTPClockProbeResHistoryInstTETotAlarmTime | read-only | current | The Total time in seconds Instant TE has been measured. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.47 | Columnf3SyncJPTPClockProbeResHistorySlavePortIdentity | read-only | current | The Tested Slave Port Identity. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.48 | Columnf3SyncJPTPClockProbeResHistoryMasterPortIdentity | read-only | current | The Tested Master Port Identity. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.49 | Columnf3SyncJPTPClockProbeResHistoryConstTEMeasurementTime | read-only | current | The Const TE Measurement Time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.50 | Columnf3SyncJPTPClockProbeResHistoryMaxTEMeasurementTime | read-only | current | The Max TE Measurement Time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.51 | Columnf3SyncJPTPClockProbeResHistoryInstTEMeasurementTime | read-only | current | The Inst TE Measurement Time for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.52 | Columnf3SyncJPTPClockProbeResHistoryMaxTEThreshold | read-write | current | The TE Max threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.7.1.53 | Columnf3SyncJPTPClockProbeResHistoryMaxTEClrThreshold | read-write | current | The TE Max clear threshold configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.8 | Tablef3SyncJPTPClockProbeResHistoryMTIEValueTable | not-accessible | current | A list of histgory entries corresponding to the PTP Clock Probe's MTIE Result Values. |
| 1.3.6.1.4.1.2544.1.12.22.1.8.1 | Rowf3SyncJPTPClockProbeResHistoryMTIEValueEntry | not-accessible | current | An entry containing information applicable to a particular PTP Clock Probe's MTIE Result Value. |
| 1.3.6.1.4.1.2544.1.12.22.1.8.1.1 | Columnf3SyncJPTPClockProbeResHistoryMTIEValueIndex | not-accessible | current | Unique index value associated with the PTP Clock Probe History Result Value. |
| 1.3.6.1.4.1.2544.1.12.22.1.8.1.2 | Columnf3SyncJPTPClockProbeResHistoryMTIEValue | read-only | current | This object allows SNMP management entities to retrieve MTIE Result Values in nanoseconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.9 | Tablef3SyncJPTPNetworkProbeTable | not-accessible | current | A list of entries corresponding to the SyncJack PTP Network Probes. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1 | Rowf3SyncJPTPNetworkProbeEntry | not-accessible | current | An entry containing information applicable to a particular SyncJack PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.1 | Columnf3SyncJPTPNetworkProbeIndex | not-accessible | current | Unique index value associated with the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.2 | Columnf3SyncJPTPNetworkProbeName | read-create | current | This object allows SNMP management entities to provide a name to the PTP Network Probe entity. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.3 | Columnf3SyncJPTPNetworkProbeAdminState | read-only | current | This object represents the Administrative State of the PTP Network Probe. This is not externally managed. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.4 | Columnf3SyncJPTPNetworkProbeOperationalState | read-only | current | This object represents the Operational State of the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.5 | Columnf3SyncJPTPNetworkProbeSecondaryState | read-only | current | This object represents the Secondary State of the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.6 | Columnf3SyncJPTPNetworkProbePTPFlowPoint | read-create | current | This object allows SNMP management entities to specify the PTP Flow Point to use as source for PTP Network Probe measurements. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.7 | Columnf3SyncJPTPNetworkProbeIpPrototocol | read-write | current | This object allows SNMP management entities to specify the IP Protocol used for PTP communication. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.8 | Columnf3SyncJPTPNetworkProbeSlaveIpV4Address | read-write | current | This object allows SNMP management entities to specify the Slave IP Address associated with the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.9 | Columnf3SyncJPTPNetworkProbeMasterIpV4Address | read-write | current | This object allows SNMP management entities to specify the Master IP Address associated with the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.10 | Columnf3SyncJPTPNetworkProbeReference | read-write | current | This object allows setting up of the PTP Network Probe Reference Entity. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.11 | Columnf3SyncJPTPNetworkProbeExpectedQL | read-write | current | This object represents the minimum expected Quality Level when bits-in and sync-e PHY are references. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.12 | Columnf3SyncJPTPNetworkProbeActualTestStartTime | read-only | current | This object provides information on the actual test start time. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.13 | Columnf3SyncJPTPNetworkProbeActualTestDuration | read-only | current | This object provides information on the actual test duration in seconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.14 | Columnf3SyncJPTPNetworkProbePDVAssuredHi | read-write | current | This object allows configuration of the higher order 32 bits of the assured level packet delay variation network limit for the PTP Network Probe, in nanosecond… |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.15 | Columnf3SyncJPTPNetworkProbePDVAssuredLo | read-write | current | This object allows configuration of the lower order 32 bits of the assured level packet delay variation network limit for the PTP Network Probe, in nanoseconds… |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.16 | Columnf3SyncJPTPNetworkProbePDVSatisfiedHi | read-write | current | This object allows configuration of the higher order 32 bits of the satisfied level of packet delay variation network limit for the PTP Network Probe, in nanos… |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.17 | Columnf3SyncJPTPNetworkProbePDVSatisfiedLo | read-write | current | This object allows configuration of the lower order 32 bits of the satisfied level of packet delay variation network limit for the PTP Network Probe, in nanose… |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.18 | Columnf3SyncJPTPNetworkProbeResPDVFwdLowRange | read-write | current | This object allows configuration of the low range for Residual Path Delay Variation statistics in the forward direction (i.e. master to slave), in nanoseconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.19 | Columnf3SyncJPTPNetworkProbeResPDVFwdMediumRange | read-write | current | This object allows configuration of the medium range for Residual Path Delay Variation statistics in the forward direction (i.e. master to slave), in nanosecon… |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.20 | Columnf3SyncJPTPNetworkProbeResPDVFwdHighRange | read-write | current | This object allows configuration of the high range for Residual Path Delay Variation statistics in the forward direction (i.e. master to slave), in nanoseconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.21 | Columnf3SyncJPTPNetworkProbeResPDVRevLowRange | read-write | current | This object allows configuration of the low range for Residual Path Delay Variation statistics in the reverse direction (i.e. slave to master), in nanoseconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.22 | Columnf3SyncJPTPNetworkProbeResPDVRevMediumRange | read-write | current | This object allows configuration of the medium range for Residual Path Delay Variation statistics in the reverse direction (i.e. slave to master), in nanosecon… |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.23 | Columnf3SyncJPTPNetworkProbeResPDVRevHighRange | read-write | current | This object allows configuration of the high range for Residual Path Delay Variation statistics in the reverse direction (i.e. slave to master), in nanoseconds. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.24 | Columnf3SyncJPTPNetworkProbeScheduler | read-only | current | This object provides the associated scheduler instance, if one exists, with this PTP Network Probe. This value is 0.0, if there is no scheduler associated with… |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.25 | Columnf3SyncJPTPNetworkProbeTestState | read-only | current | This object provides the PTP Network Probe test state. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.26 | Columnf3SyncJPTPNetworkProbeNoTimestampFailure | read-only | current | This object provides information on whether the measured PTP source indicated a no-timestamp failure. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.27 | Columnf3SyncJPTPNetworkProbeNoEventMessageFailure | read-only | current | This object provides information on whether the measured PTP source indicated a no-event message failure. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.28 | Columnf3SyncJPTPNetworkProbeFwdScore | read-only | current | This object provides the current score in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.29 | Columnf3SyncJPTPNetworkProbeRevScore | read-only | current | This object provides the current score in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.30 | Columnf3SyncJPTPNetworkProbeReferenceFailure | read-only | current | This object provides information on whether the reference failed. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.31 | Columnf3SyncJPTPNetworkProbeStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.32 | Columnf3SyncJPTPNetworkProbeRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.22.1.9.1.33 | Columnf3SyncJPTPNetworkProbeResultsAvailable | read-only | current | The results available configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.10 | Tablef3SyncJScheduleGroupTable | not-accessible | current | A list of entries that allow a set of SyncJack Clock Probes, PTP Clock Probes and PTP Network Probes to be scheduled. |
| 1.3.6.1.4.1.2544.1.12.22.1.10.1 | Rowf3SyncJScheduleGroupEntry | not-accessible | current | A row in f3SyncJScheduleGroupTable. Entries are created in this table by management application action. |
| 1.3.6.1.4.1.2544.1.12.22.1.10.1.1 | Columnf3SyncJScheduleGroupIndex | not-accessible | current | A unique index to distinguish the SyncJack Schedule Group. |
| 1.3.6.1.4.1.2544.1.12.22.1.10.1.2 | Columnf3SyncJScheduleGroupDescr | read-create | current | Description of the SyncJack schedule group. |
| 1.3.6.1.4.1.2544.1.12.22.1.10.1.3 | Columnf3SyncJScheduleGroupEntityList | read-create | current | A comma separated list of Clock Probes, PTP Clock Probes and PTP Network Probes, that will have the same schedule. |
| 1.3.6.1.4.1.2544.1.12.22.1.10.1.4 | Columnf3SyncJScheduleGroupType | read-create | current | This object allows to specify the schedule group type of the SyncJack Schedule group. Only 'one-shot' is supported. |
| 1.3.6.1.4.1.2544.1.12.22.1.10.1.5 | Columnf3SyncJScheduleGroupStartTime | read-create | current | This object allows specification of the start time of the SyncJack Schedule Group. Value of time less than current system time will equate to current time. Whe… |
| 1.3.6.1.4.1.2544.1.12.22.1.10.1.6 | Columnf3SyncJScheduleGroupDuration | read-create | current | This object allows specification of the duration in 'seconds' for SyncJack Schedule Group run. Note that a value of 4294967295 means Duration as FOREVER. |
| 1.3.6.1.4.1.2544.1.12.22.1.10.1.7 | Columnf3SyncJScheduleGroupStatus | read-only | current | This object indicates the current status of the SyncJack Schedule Group. |
| 1.3.6.1.4.1.2544.1.12.22.1.10.1.8 | Columnf3SyncJScheduleGroupStorageType | read-create | current | The type of storage configured for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.1.10.1.9 | Columnf3SyncJScheduleGroupRowStatus | read-create | current | The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description … |
| 1.3.6.1.4.1.2544.1.12.22.2 | Nodef3SyncJPerformanceObjects | |||
| 1.3.6.1.4.1.2544.1.12.22.2.1 | Tablef3SyncJPTPNetworkProbeStatsTable | not-accessible | current | A collection of SyncJack PTP Network Probe statistics. These reflect the current data. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1 | Rowf3SyncJPTPNetworkProbeStatsEntry | not-accessible | current | A conceptual row in the f3SyncJPTPNetworkProbeStatsTable. Entries exist in this table for each PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.1 | Columnf3SyncJPTPNetworkProbeStatsIndex | not-accessible | current | An arbitrary integer index value used to uniquely identify this PTPNetworkProbe statistics entry. Index 1 corresponds to 15minute, index 2 to 1 day and index 3… |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.2 | Columnf3SyncJPTPNetworkProbeStatsIntervalType | read-only | current | Indicates the type of collection, i.e. whether it is 15 Min, 1 Day or rollover. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.3 | Columnf3SyncJPTPNetworkProbeStatsValid | read-only | current | Indicates the validity of the bin. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.4 | Columnf3SyncJPTPNetworkProbeStatsAction | read-write | current | Allows the Manager to clear the bin. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.5 | Columnf3SyncJPTPNetworkProbeStatsSyncMsgsRx | read-only | current | Number of PTP Sync messages received at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.6 | Columnf3SyncJPTPNetworkProbeStatsDelayRspMsgsRx | read-only | current | Number of PTP Delay Response messages received at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.7 | Columnf3SyncJPTPNetworkProbeStatsLostSyncMsgs | read-only | current | Number of PTP Sync messages counted as lost at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.8 | Columnf3SyncJPTPNetworkProbeStatsLostDelayRspMsgs | read-only | current | Number of PTP Delay Response messages counted as lost at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.9 | Columnf3SyncJPTPNetworkProbeStatsMinMeanPathDelay | read-only | current | Minimum Mean Path Delay in nanoseconds computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.10 | Columnf3SyncJPTPNetworkProbeStatsMaxMeanPathDelay | read-only | current | Maximum Mean Path Delay in nanoseconds computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.11 | Columnf3SyncJPTPNetworkProbeStatsAvgMeanPathDelay | read-only | current | Average Mean Path Delay in nanoseconds computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.12 | Columnf3SyncJPTPNetworkProbeStatsMinSyncPathDelay | read-only | current | Minimum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.13 | Columnf3SyncJPTPNetworkProbeStatsMaxSyncPathDelay | read-only | current | Maximum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.14 | Columnf3SyncJPTPNetworkProbeStatsAvgSyncPathDelay | read-only | current | Average Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.15 | Columnf3SyncJPTPNetworkProbeStatsAvgResPDVFwd | read-only | current | Average Residual Packet Delay Variation in nanoseconds in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.16 | Columnf3SyncJPTPNetworkProbeStatsResPDVFwdLow | read-only | current | Total number of Low Range Residual Packet Delay Variation results in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.17 | Columnf3SyncJPTPNetworkProbeStatsResPDVFwdMedium | read-only | current | Total number of Medium Range Residual Packet Delay Variation results in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.18 | Columnf3SyncJPTPNetworkProbeStatsResPDVFwdHigh | read-only | current | Total number of High Range Residual Packet Delay Variation results in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.19 | Columnf3SyncJPTPNetworkProbeStatsResPDVFwdTotal | read-only | current | Total number of Residual Packet Delay Variation results in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.20 | Columnf3SyncJPTPNetworkProbeStatsFwdScore5 | read-only | current | Total time the network usability score is 5 in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.21 | Columnf3SyncJPTPNetworkProbeStatsFwdScore4 | read-only | current | Total time the network usability score is 4 in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.22 | Columnf3SyncJPTPNetworkProbeStatsFwdScore3 | read-only | current | Total time the network usability score is 3 in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.23 | Columnf3SyncJPTPNetworkProbeStatsAvgResPDVRev | read-only | current | Average Residual Packet Delay Variation in nanoseconds in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.24 | Columnf3SyncJPTPNetworkProbeStatsResPDVRevLow | read-only | current | Total number of Low Range Residual Packet Delay Variation results in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.25 | Columnf3SyncJPTPNetworkProbeStatsResPDVRevMedium | read-only | current | Total number of Medium Range Residual Packet Delay Variation results in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.26 | Columnf3SyncJPTPNetworkProbeStatsResPDVRevHigh | read-only | current | Total number of High Range Residual Packet Delay Variation results in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.27 | Columnf3SyncJPTPNetworkProbeStatsResPDVRevTotal | read-only | current | Total number of Residual Packet Delay Variation results in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.28 | Columnf3SyncJPTPNetworkProbeStatsRevScore5 | read-only | current | Total time the network usability score is 5 in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.29 | Columnf3SyncJPTPNetworkProbeStatsRevScore4 | read-only | current | Total time the network usability score is 4 in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.30 | Columnf3SyncJPTPNetworkProbeStatsRevScore3 | read-only | current | Total time the network usability score is 3 in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.31 | Columnf3SyncJPTPNetworkProbeStatsMinRPDVFwd | read-only | current | Minimum Residual PDV in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.32 | Columnf3SyncJPTPNetworkProbeStatsMinRPDVRev | read-only | current | Minimum Residual PDV in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.33 | Columnf3SyncJPTPNetworkProbeStatsMinPathAsymmetry | read-write | current | The min path asymmetry for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.34 | Columnf3SyncJPTPNetworkProbeStatsMaxPathAsymmetry | read-write | current | The max path asymmetry for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.35 | Columnf3SyncJPTPNetworkProbeStatsAvgPathAsymmetry | read-write | current | The average path asymmetry for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.36 | Columnf3SyncJPTPNetworkProbeStatsPathLossSecondsFwd | read-write | current | The path loss seconds forwarded for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.37 | Columnf3SyncJPTPNetworkProbeStatsPathLossSecondsRev | read-write | current | The path loss seconds reverted for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.38 | Columnf3SyncJPTPNetworkProbeStatsMinDelayReqPathDelay | read-only | current | Minimum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.39 | Columnf3SyncJPTPNetworkProbeStatsMaxDelayReqPathDelay | read-only | current | Maximum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.1.1.40 | Columnf3SyncJPTPNetworkProbeStatsAvgDelayReqPathDelay | read-only | current | Average Delay Req Path Delay in nanoseconds computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2 | Tablef3SyncJPTPNetworkProbeHistoryTable | not-accessible | current | A collection of SyncJack PTP Network Probe statistics. These reflect the history data. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1 | Rowf3SyncJPTPNetworkProbeHistoryEntry | not-accessible | current | A conceptual row in the f3SyncJPTPNetworkProbeHistoryTable. Entries exist in this table for each PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.1 | Columnf3SyncJPTPNetworkProbeHistoryIndex | not-accessible | current | An arbitrary integer index value used to uniquely identify this SyncJack PTP Network Probe PM history entry. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.2 | Columnf3SyncJPTPNetworkProbeHistoryTime | read-only | current | Indicates the time of history bin creation. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.3 | Columnf3SyncJPTPNetworkProbeHistoryValid | read-only | current | Indicates the validity of the bin. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.4 | Columnf3SyncJPTPNetworkProbeHistoryAction | read-write | current | Allows the Manager to clear the bin. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.5 | Columnf3SyncJPTPNetworkProbeHistorySyncMsgsRx | read-only | current | Number of PTP Sync messages received at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.6 | Columnf3SyncJPTPNetworkProbeHistoryDelayRspMsgsRx | read-only | current | Number of PTP Delay Response messages received at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.7 | Columnf3SyncJPTPNetworkProbeHistoryLostSyncMsgs | read-only | current | Number of PTP Sync messages counted as lost at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.8 | Columnf3SyncJPTPNetworkProbeHistoryLostDelayRspMsgs | read-only | current | Number of PTP Delay Response messages counted as lost at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.9 | Columnf3SyncJPTPNetworkProbeHistoryMinMeanPathDelay | read-only | current | Minimum Mean Path Delay in nanoseconds computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.10 | Columnf3SyncJPTPNetworkProbeHistoryMaxMeanPathDelay | read-only | current | Maximum Mean Path Delay in nanoseconds computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.11 | Columnf3SyncJPTPNetworkProbeHistoryAvgMeanPathDelay | read-only | current | Average Mean Path Delay in nanoseconds computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.12 | Columnf3SyncJPTPNetworkProbeHistoryMinSyncPathDelay | read-only | current | Minimum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.13 | Columnf3SyncJPTPNetworkProbeHistoryMaxSyncPathDelay | read-only | current | Maximum Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.14 | Columnf3SyncJPTPNetworkProbeHistoryAvgSyncPathDelay | read-only | current | Average Path Delay in nanoseconds of Sync messages computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.15 | Columnf3SyncJPTPNetworkProbeHistoryAvgResPDVFwd | read-only | current | Average Residual Packet Delay Variation in nanoseconds in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.16 | Columnf3SyncJPTPNetworkProbeHistoryResPDVFwdLow | read-only | current | Total number of Low Range Residual Packet Delay Variation results in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.17 | Columnf3SyncJPTPNetworkProbeHistoryResPDVFwdMedium | read-only | current | Total number of Medium Range Residual Packet Delay Variation results in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.18 | Columnf3SyncJPTPNetworkProbeHistoryResPDVFwdHigh | read-only | current | Total number of High Range Residual Packet Delay Variation results in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.19 | Columnf3SyncJPTPNetworkProbeHistoryResPDVFwdTotal | read-only | current | Total number of Residual Packet Delay Variation results in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.20 | Columnf3SyncJPTPNetworkProbeHistoryFwdScore5 | read-only | current | Total time the network usability score is 5 in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.21 | Columnf3SyncJPTPNetworkProbeHistoryFwdScore4 | read-only | current | Total time the network usability score is 4 in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.22 | Columnf3SyncJPTPNetworkProbeHistoryFwdScore3 | read-only | current | Total time the network usability score is 3 in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.23 | Columnf3SyncJPTPNetworkProbeHistoryAvgResPDVRev | read-only | current | Average Residual Packet Delay Variation in nanoseconds in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.24 | Columnf3SyncJPTPNetworkProbeHistoryResPDVRevLow | read-only | current | Total number of Low Range Residual Packet Delay Variation results in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.25 | Columnf3SyncJPTPNetworkProbeHistoryResPDVRevMedium | read-only | current | Total number of Medium Range Residual Packet Delay Variation results in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.26 | Columnf3SyncJPTPNetworkProbeHistoryResPDVRevHigh | read-only | current | Total number of High Range Residual Packet Delay Variation results in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.27 | Columnf3SyncJPTPNetworkProbeHistoryResPDVRevTotal | read-only | current | Total number of Residual Packet Delay Variation results in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.28 | Columnf3SyncJPTPNetworkProbeHistoryRevScore5 | read-only | current | Total time the network usability score is 5 in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.29 | Columnf3SyncJPTPNetworkProbeHistoryRevScore4 | read-only | current | Total time the network usability score is 4 in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.30 | Columnf3SyncJPTPNetworkProbeHistoryRevScore3 | read-only | current | Total time the network usability score is 3 in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.31 | Columnf3SyncJPTPNetworkProbeHistoryMinRPDVFwd | read-only | current | Minimum Residual PDV in the forward direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.32 | Columnf3SyncJPTPNetworkProbeHistoryMinRPDVRev | read-only | current | Minimum Residual PDV in the reverse direction. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.33 | Columnf3SyncJPTPNetworkProbeHistoryMinPathAsymmetry | read-only | current | The min path asymmetry for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.34 | Columnf3SyncJPTPNetworkProbeHistoryMaxPathAsymmetry | read-only | current | The max path asymmetry for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.35 | Columnf3SyncJPTPNetworkProbeHistoryAvgPathAsymmetry | read-only | current | The average path asymmetry for this entry. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.36 | Columnf3SyncJPTPNetworkProbeHistoryMinDelayReqPathDelay | read-only | current | Minimum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.37 | Columnf3SyncJPTPNetworkProbeHistoryMaxDelayReqPathDelay | read-only | current | Maximum Delay Req Path Delay in nanoseconds computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.2.1.38 | Columnf3SyncJPTPNetworkProbeHistoryAvgDelayReqPathDelay | read-only | current | Average Delay Req Path Delay in nanoseconds computed at the PTP Network Probe. |
| 1.3.6.1.4.1.2544.1.12.22.2.3 | Tablef3SyncJPTPNetworkProbeThresholdTable | not-accessible | current | A table of entries that allow support the PTP Network Probe Thresholds. |
| 1.3.6.1.4.1.2544.1.12.22.2.3.1 | Rowf3SyncJPTPNetworkProbeThresholdEntry | not-accessible | current | A conceptual row in the f3SyncJPTPNetworkProbeThresholdTable. |
| 1.3.6.1.4.1.2544.1.12.22.2.3.1.1 | Columnf3SyncJPTPNetworkProbeThresholdIndex | not-accessible | current | An index that uniquely identifies an entry in the f3SyncJPTPNetworkProbeThresholdTable. |
| 1.3.6.1.4.1.2544.1.12.22.2.3.1.2 | Columnf3SyncJPTPNetworkProbeThresholdInterval | read-only | current | The interval over which monitored value is sampled and compared with the specified threshold. |
| 1.3.6.1.4.1.2544.1.12.22.2.3.1.3 | Columnf3SyncJPTPNetworkProbeThresholdVariable | read-only | current | The object identifier of the particular variable to be sampled. |
| 1.3.6.1.4.1.2544.1.12.22.2.3.1.4 | Columnf3SyncJPTPNetworkProbeThresholdValueLo | read-write | current | Lower 32 bits of the threshold value. |
| 1.3.6.1.4.1.2544.1.12.22.2.3.1.5 | Columnf3SyncJPTPNetworkProbeThresholdValueHi | read-write | current | Higher 32 bits of the threshold value. |
| 1.3.6.1.4.1.2544.1.12.22.2.3.1.6 | Columnf3SyncJPTPNetworkProbeThresholdMonValue | read-only | current | Monitored value corresponding to f3SyncJPTPNetworkProbeThresholdVariable. |
| 1.3.6.1.4.1.2544.1.12.22.3 | Nodef3SyncJNotifications | |||
| 1.3.6.1.4.1.2544.1.12.22.3.1 | Notificationf3SyncJPTPNetworkProbeThresholdCrossingAlert | current | This trap is sent each time a threshold on a PM condition on an PTP Network Probe is crossed. | |
| 1.3.6.1.4.1.2544.1.12.22.3.2 | Notificationf3SyncJClockProbeStatusChangeTrap | current | This trap is sent each time any status changes happen on a SyncJack Clock Probe. | |
| 1.3.6.1.4.1.2544.1.12.22.3.3 | Notificationf3SyncJPTPClockProbeStatusChangeTrap | current | This trap is sent each time any status changes happen on a SyncJack PTP Clock Probe. | |
| 1.3.6.1.4.1.2544.1.12.22.3.4 | Notificationf3SyncJPTPNetworkProbeStatusChangeTrap | current | This trap is sent each time any status changes happen on a SyncJack PTP Network Probe. | |
| 1.3.6.1.4.1.2544.1.12.22.4 | Nodef3SyncJConformance | |||
| 1.3.6.1.4.1.2544.1.12.22.4.1 | Nodef3SyncJCompliances | |||
| 1.3.6.1.4.1.2544.1.12.22.4.1.1 | Compliancef3SyncJCompliance | current | Describes the requirements for conformance to the F3 SyncJack group. | |
| 1.3.6.1.4.1.2544.1.12.22.4.2 | Nodef3SyncJGroups | |||
| 1.3.6.1.4.1.2544.1.12.22.4.2.1 | Groupf3SyncJObjectGroup | current | A collection of objects used to manage the F3 SyncJack Configuration data. | |
| 1.3.6.1.4.1.2544.1.12.22.4.2.2 | Groupf3SyncJPerfObjectGroup | current | A collection of objects used to manage the F3 SyncJack Performance data. | |
| 1.3.6.1.4.1.2544.1.12.22.4.2.3 | Groupf3SyncJNotifGroup | current | A collection of notifications related to F3 SyncJack functionality. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FFOObserWindow | INTEGER { window-100s(1), window-200s(2), window-500s(3), window-1000s(4), window-2000s(5), window-5000s(6), window-10000s(7) } | current | Enumerations for FFO obser window. |
| MeasurementType | INTEGER { phase(1), frequency(2) } | current | Enumerations for Measurement Type. |
| MTIEMaskType | INTEGER { g823-e1-ssu(1), g823-e1-sec(2), g823-e1-traffic(3), g823-pdh(4), g824-t1-sync(5), g824-t1-traffic(6), g8261-e1-case1(7), g8261-t1-case1(8), g8261-e1-case2(9), g8261-eec-opt1(10), g8263-const-temp(11), g8272-prtc(12), g8261-1(13), g8262-eec-opt1(14), g8262-eec-opt1-temp(15), g8262-eec-opt2(16), g8262-eec-opt1-tolerrance(17), g8263-var-temp(18), g8273-2(19), g8271-1(20) } | current | Enumerations for Maximum Time Interval Error Mask. |
| PTPMeasurementDirection | INTEGER { master2slave(1), slave2master(2), twoways(3), master2slave-t4(4) } | current | Enumerations for PTP Measurement Direction. |
| SyncJackTestState | INTEGER { waiting (1), running (2), completed (3), failed (4), suspended (5), notscheduled (6) } | current | Enumerations for Time Interval Error Test State. |
| TIEMeasurementRate | INTEGER { meas-10per1sec(1), meas-1per1sec(2), meas-1per2sec(3) } | current | Enumerations for TIE Measurement Rate. |
| TIESourceType | INTEGER { phase(1), frequency(2) } | current | Enumerations for TIE Source Type. |