HIRSCHMANN-MMP4-ROUTING-MIB
176 objects
The Hirschmann Private Platform4 Routing MIB definitions for Platform devices.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.15.2 | IdentityhmPlatform4Routing | The Hirschmann Private Platform4 Routing MIB definitions for Platform devices. | ||
| 1.3.6.1.4.1.248.15.2.1 | NodehmAgentSwitchArpGroup | |||
| 1.3.6.1.4.1.248.15.2.1.1 | ScalarhmAgentSwitchArpAgeoutTime | read-write | current | Configures the ARP entry ageout time in seconds. Allowable range: 15-21600 |
| 1.3.6.1.4.1.248.15.2.1.2 | ScalarhmAgentSwitchArpResponseTime | read-write | current | Configures the ARP request response timeout in seconds. Allowable range: 1-10 |
| 1.3.6.1.4.1.248.15.2.1.3 | ScalarhmAgentSwitchArpMaxRetries | read-write | current | Configures the ARP count of maximum request for retries. Allowable range: 0-10 |
| 1.3.6.1.4.1.248.15.2.1.4 | ScalarhmAgentSwitchArpCacheSize | read-write | current | Configures the ARP maximum number of entries in the cache. Allowable range is platform-specific. |
| 1.3.6.1.4.1.248.15.2.1.5 | ScalarhmAgentSwitchArpDynamicRenew | read-write | current | This indicates the current setting of ARP dynamic renew mode. |
| 1.3.6.1.4.1.248.15.2.1.6 | ScalarhmAgentSwitchArpTotalEntryCountCurrent | read-only | current | Current number of entries in the ARP cache. |
| 1.3.6.1.4.1.248.15.2.1.7 | ScalarhmAgentSwitchArpTotalEntryCountPeak | read-only | current | Peak number of entries recorded in the ARP cache over time. This value is restarted whenever the ARP cache size is changed. |
| 1.3.6.1.4.1.248.15.2.1.8 | ScalarhmAgentSwitchArpStaticEntryCountCurrent | read-only | current | Current number of configured static ARP entries. |
| 1.3.6.1.4.1.248.15.2.1.9 | ScalarhmAgentSwitchArpStaticEntryCountMax | read-only | current | Maximum number of configurable static ARP entries. |
| 1.3.6.1.4.1.248.15.2.1.10 | TablehmAgentSwitchArpTable | not-accessible | current | This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information. |
| 1.3.6.1.4.1.248.15.2.1.10.1 | RowhmAgentSwitchArpEntry | not-accessible | current | The entry of the hmAgentSwitchArpTable. |
| 1.3.6.1.4.1.248.15.2.1.10.1.1 | ColumnhmAgentSwitchArpAge | read-only | current | This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries a… |
| 1.3.6.1.4.1.248.15.2.1.10.1.2 | ColumnhmAgentSwitchArpIpAddress | read-only | current | The IP Address assigned to each interface. |
| 1.3.6.1.4.1.248.15.2.1.10.1.3 | ColumnhmAgentSwitchArpMacAddress | read-create | current | The hardware MAX Address that each interface maps to. |
| 1.3.6.1.4.1.248.15.2.1.10.1.4 | ColumnhmAgentSwitchArpInterface | read-only | current | The Associated IfIndex which identified the ARP Entry. |
| 1.3.6.1.4.1.248.15.2.1.10.1.5 | ColumnhmAgentSwitchArpType | read-only | current | The type of ARP entry. |
| 1.3.6.1.4.1.248.15.2.1.10.1.6 | ColumnhmAgentSwitchArpStatus | read-write | current | The status of this ARP entry. Setting this object destroy will remove the entry. |
| 1.3.6.1.4.1.248.15.2.1.11 | ScalarhmAgentSwitchArpSparseLearn | read-write | current | This indicates the current setting of ARP sparse learn mode. |
| 1.3.6.1.4.1.248.15.2.2 | NodehmAgentSwitchIpGroup | |||
| 1.3.6.1.4.1.248.15.2.2.1 | ScalarhmAgentSwitchIpRoutingMode | read-write | current | Administratively enables/disables routing on the switch. |
| 1.3.6.1.4.1.248.15.2.2.2 | ScalarhmAgentSwitchIpVRRPMode | read-write | current | Administratively enables/disables VRRP on the switch. |
| 1.3.6.1.4.1.248.15.2.2.3 | TablehmAgentSwitchIpInterfaceTable | not-accessible | current | The hmAgentSwitchIpInterfaceTable. |
| 1.3.6.1.4.1.248.15.2.2.3.1 | RowhmAgentSwitchIpInterfaceEntry | not-accessible | current | The entry of the hmAgentSwitchIpInterfaceTable. |
| 1.3.6.1.4.1.248.15.2.2.3.1.1 | ColumnhmAgentSwitchIpInterfaceIfIndex | read-only | current | The IfIndex associated with this instance. |
| 1.3.6.1.4.1.248.15.2.2.3.1.2 | ColumnhmAgentSwitchIpInterfaceIpAddress | read-write | current | The IpAddress assigned to this interface. When setting this value, the value of hmAgentSwitchIpInterfaceNetMask must be set at the same time. |
| 1.3.6.1.4.1.248.15.2.2.3.1.3 | ColumnhmAgentSwitchIpInterfaceNetMask | read-write | current | The NetMask assigned to this interface. When setting this value, the value of hmAgentSwitchIpInterfaceIpAddress must be set at the same time. |
| 1.3.6.1.4.1.248.15.2.2.3.1.4 | ColumnhmAgentSwitchIpInterfaceClearIp | read-write | current | Sets the interface's primary IpAddress and NetMask back to 0.0.0.0. The primary ip address can be removed if and only if there are no configured secondary addr… |
| 1.3.6.1.4.1.248.15.2.2.3.1.5 | ColumnhmAgentSwitchIpInterfaceRoutingMode | read-write | current | Enables or disables routing for this interface. |
| 1.3.6.1.4.1.248.15.2.2.3.1.6 | ColumnhmAgentSwitchIpInterfaceProxyARPMode | read-write | current | Enables or disables Proxy ARP for this interface. |
| 1.3.6.1.4.1.248.15.2.2.3.1.7 | ColumnhmAgentSwitchIpInterfaceMtuValue | read-write | current | Configures the MTU value for this interface. If the value returned is 0 this interface is not enabled for routing. It is not valid to set this value to 0 if ro… |
| 1.3.6.1.4.1.248.15.2.2.3.1.8 | ColumnhmAgentSwitchIpInterfaceSlotNum | read-only | current | The Slot Number associated with this instance. |
| 1.3.6.1.4.1.248.15.2.2.3.1.9 | ColumnhmAgentSwitchIpInterfacePortNum | read-only | current | The Port Number associated with this instance. |
| 1.3.6.1.4.1.248.15.2.2.3.1.10 | ColumnhmAgentSwitchIpInterfaceNetdirectedBCMode | read-write | current | Enables or disables netdirected broadcasts for this interface. |
| 1.3.6.1.4.1.248.15.2.2.4 | TablehmAgentSwitchIpRouterDiscoveryTable | not-accessible | current | There is no global administrative flag for router discovery. The global routing flag (hmAgentSwitchIpRoutingMode) will be used for this purpose. If routing is … |
| 1.3.6.1.4.1.248.15.2.2.4.1 | RowhmAgentSwitchIpRouterDiscoveryEntry | not-accessible | current | The entry of the hmAgentSwitchIpRouterDiscoveryTable. |
| 1.3.6.1.4.1.248.15.2.2.4.1.1 | ColumnhmAgentSwitchIpRouterDiscoveryIfIndex | read-only | current | Interface Number to configure Router Discovery on. |
| 1.3.6.1.4.1.248.15.2.2.4.1.2 | ColumnhmAgentSwitchIpRouterDiscoveryAdvertiseMode | read-write | current | Enable or disable router discovery on the interface. |
| 1.3.6.1.4.1.248.15.2.2.4.1.3 | ColumnhmAgentSwitchIpRouterDiscoveryMaxAdvertisementInterval | read-write | current | Maximum time allowed between sending router advertisements from the interface. |
| 1.3.6.1.4.1.248.15.2.2.4.1.4 | ColumnhmAgentSwitchIpRouterDiscoveryMinAdvertisementInterval | read-write | current | Minimum time allowed between sending router advertisements from the interface. This value must be less than or equal to hmAgentSwitchIpRouterDiscoveryMaxAdvert… |
| 1.3.6.1.4.1.248.15.2.2.4.1.5 | ColumnhmAgentSwitchIpRouterDiscoveryAdvertisementLifetime | read-write | current | Value of lifetime field of router advertsisement sent from the interface. This value must be greater than or equal to hmAgentSwitchIpRouterDiscoveryMaxAdvertis… |
| 1.3.6.1.4.1.248.15.2.2.4.1.6 | ColumnhmAgentSwitchIpRouterDiscoveryPreferenceLevel | read-write | current | Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher t… |
| 1.3.6.1.4.1.248.15.2.2.4.1.7 | ColumnhmAgentSwitchIpRouterDiscoveryAdvertisementAddress | read-write | current | Address used when sending router advertisements from the interface. |
| 1.3.6.1.4.1.248.15.2.2.5 | TablehmAgentSwitchIpVlanTable | not-accessible | current | The hmAgentSwitchIpVlanTable. |
| 1.3.6.1.4.1.248.15.2.2.5.1 | RowhmAgentSwitchIpVlanEntry | not-accessible | current | A Static VLAN for which routing can be enabled/disabled. |
| 1.3.6.1.4.1.248.15.2.2.5.1.1 | ColumnhmAgentSwitchIpVlanId | read-only | current | The Vlan's Id. |
| 1.3.6.1.4.1.248.15.2.2.5.1.2 | ColumnhmAgentSwitchIpVlanIfIndex | read-only | current | The IfIndex associated with this VLAN. |
| 1.3.6.1.4.1.248.15.2.2.5.1.3 | ColumnhmAgentSwitchIpVlanRoutingStatus | read-create | current | Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing |
| 1.3.6.1.4.1.248.15.2.2.6 | TablehmAgentSwitchSecondaryAddressTable | not-accessible | current | Contains a list of secondary IP Addresses associated with an interface. |
| 1.3.6.1.4.1.248.15.2.2.6.1 | RowhmAgentSwitchSecondaryAddressEntry | not-accessible | current | A secondary IP Address for a given interface. This IP Address must not conflict with the IP Address configured in the hmAgentSwitchIpInterfaceTable. |
| 1.3.6.1.4.1.248.15.2.2.6.1.1 | ColumnhmAgentSwitchSecondaryIpAddress | not-accessible | current | The Secondary IP Address assigned to this interface. |
| 1.3.6.1.4.1.248.15.2.2.6.1.2 | ColumnhmAgentSwitchSecondaryNetMask | read-create | current | The Secondary Net Mask assigned to this interface. This value must be set during creation, and can not be changed. |
| 1.3.6.1.4.1.248.15.2.2.6.1.3 | ColumnhmAgentSwitchSecondaryStatus | read-create | current | Creates a new entry in the Secondary Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given i… |
| 1.3.6.1.4.1.248.15.2.2.7 | TablehmAgentSwitchIpRoutePreferenceTable | not-accessible | current | This table contains the MIB objects required to configure the preferences/ administrative distances for the various routing protocols: |
| 1.3.6.1.4.1.248.15.2.2.7.1 | RowhmAgentSwitchIpRoutePreferenceEntry | not-accessible | current | The entry of the hmAgentSwitchIpRoutePreferenceTable. |
| 1.3.6.1.4.1.248.15.2.2.7.1.1 | ColumnhmAgentSwitchIpRoutePreferenceSource | read-only | current | Routing protocol for which this entry belongs |
| 1.3.6.1.4.1.248.15.2.2.7.1.2 | ColumnhmAgentSwitchIpRoutePreferenceValue | read-write | current | Adminstrative distance for this routing protocol. |
| 1.3.6.1.4.1.248.15.2.2.8 | TablehmAgentSwitchIpRouteStaticTable | not-accessible | current | ...... |
| 1.3.6.1.4.1.248.15.2.2.8.1 | RowhmAgentSwitchIpRouteStaticEntry | not-accessible | current | The entry of the hmAgentSwitchIpRouteStaticTable. |
| 1.3.6.1.4.1.248.15.2.2.8.1.1 | ColumnhmAgentSwitchIpRouteStaticDestination | not-accessible | current | ..... |
| 1.3.6.1.4.1.248.15.2.2.8.1.2 | ColumnhmAgentSwitchIpRouteStaticDestinationMask | not-accessible | current | ..... |
| 1.3.6.1.4.1.248.15.2.2.8.1.3 | ColumnhmAgentSwitchIpRouteStaticNextHop | not-accessible | current | ..... |
| 1.3.6.1.4.1.248.15.2.2.8.1.4 | ColumnhmAgentSwitchIpRouteStaticPreference | read-write | current | ..... |
| 1.3.6.1.4.1.248.15.2.2.8.1.5 | ColumnhmAgentSwitchIpRouteStaticStatus | read-write | current | ..... |
| 1.3.6.1.4.1.248.15.2.2.8.1.6 | ColumnhmAgentSwitchIpRouteStaticTrackId | read-write | current | The trackId of the object that should be tracked by this nexthop. If the object goes down, the nexthop is removed from the routing table, it is added again if … |
| 1.3.6.1.4.1.248.15.2.2.100 | ScalarhmAgentSwitchIpVlanSingleMacMode | read-write | current | If enabled, all vlan routing interfaces use the same MAC address. |
| 1.3.6.1.4.1.248.15.2.2.101 | NodehmAgentSwitchIpTableSizesGroup | |||
| 1.3.6.1.4.1.248.15.2.2.101.1 | ScalarhmAgentSwitchIpTableSizeArp | read-write | current | Sets the maximum size of the ARP table for routing |
| 1.3.6.1.4.1.248.15.2.2.101.2 | ScalarhmAgentSwitchIpTableSizeUCRoutes | read-write | current | Sets the size of the unicast route table |
| 1.3.6.1.4.1.248.15.2.2.101.3 | ScalarhmAgentSwitchIpTableSizeMCRoutes | read-write | current | Sets the size of the multicast route table |
| 1.3.6.1.4.1.248.15.2.2.101.4 | ScalarhmAgentSwitchIpCurrentTableSizeArp | read-only | current | The current size of the ARP table for routing |
| 1.3.6.1.4.1.248.15.2.2.101.5 | ScalarhmAgentSwitchIpCurrentTableSizeUCRoutes | read-only | current | The current size of the unicast route table |
| 1.3.6.1.4.1.248.15.2.2.101.6 | ScalarhmAgentSwitchIpCurrentTableSizeMCRoutes | read-only | current | The current size of the multicast route table |
| 1.3.6.1.4.1.248.15.2.3 | NodehmAgentRouterRipConfigGroup | |||
| 1.3.6.1.4.1.248.15.2.3.1 | ScalarhmAgentRouterRipAdminState | read-write | current | Sets the administrative mode of RIP in the router. |
| 1.3.6.1.4.1.248.15.2.3.2 | ScalarhmAgentRouterRipSplitHorizonMode | read-write | current | Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split… |
| 1.3.6.1.4.1.248.15.2.3.3 | ScalarhmAgentRouterRipAutoSummaryMode | read-write | current | Sets the RIP auto summarization mode in the router. A value of enable(1) means that routes advertized by this RIP router are combined, or summarized, whenever … |
| 1.3.6.1.4.1.248.15.2.3.4 | ScalarhmAgentRouterRipHostRoutesAcceptMode | read-write | current | Sets the RIP host route acceptance mode in the router. A value of enable(1) means that host routes advertized to this RIP router will be accepted (learned) int… |
| 1.3.6.1.4.1.248.15.2.3.5 | ScalarhmAgentRouterRipDefaultMetric | read-write | current | Default metric of redistributed routes, when RIP redistributes from other protocols. |
| 1.3.6.1.4.1.248.15.2.3.6 | ScalarhmAgentRouterRipDefaultMetricConfigured | read-write | current | Flag to determine whether RIP default-metric is configured or not. |
| 1.3.6.1.4.1.248.15.2.3.7 | ScalarhmAgentRouterRipDefaultInfoOriginate | read-write | current | Flag to determine, whether RIP can advertise a default-route learned from another protocol. |
| 1.3.6.1.4.1.248.15.2.3.8 | TablehmAgentRipRouteRedistTable | not-accessible | current | This table contains the MIB objects required to configure route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be a… |
| 1.3.6.1.4.1.248.15.2.3.8.1 | RowhmAgentRipRouteRedistEntry | not-accessible | current | The entry of the hmAgentRipRouteRedistTable. |
| 1.3.6.1.4.1.248.15.2.3.8.1.1 | ColumnhmAgentRipRouteRedistSource | read-only | current | Source route, from which RIP can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry. |
| 1.3.6.1.4.1.248.15.2.3.8.1.2 | ColumnhmAgentRipRouteRedistMode | read-write | current | User enabels/disables route-redistribution for a particular source protocol. |
| 1.3.6.1.4.1.248.15.2.3.8.1.3 | ColumnhmAgentRipRouteRedistMetric | read-write | current | Metric used for redistributing a particular source protocol route into RIP. |
| 1.3.6.1.4.1.248.15.2.3.8.1.4 | ColumnhmAgentRipRouteRedistMetricConfigured | read-write | current | Flag to determine whether RIP redistribute-metric is configured or not. |
| 1.3.6.1.4.1.248.15.2.3.8.1.5 | ColumnhmAgentRipRouteRedistMatchInternal | read-write | current | If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.248.15.2.3.8.1.6 | ColumnhmAgentRipRouteRedistMatchExternal1 | read-write | current | If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.248.15.2.3.8.1.7 | ColumnhmAgentRipRouteRedistMatchExternal2 | read-write | current | If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.248.15.2.3.8.1.8 | ColumnhmAgentRipRouteRedistMatchNSSAExternal1 | read-write | current | If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.248.15.2.3.8.1.9 | ColumnhmAgentRipRouteRedistMatchNSSAExternal2 | read-write | current | If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf. |
| 1.3.6.1.4.1.248.15.2.3.8.1.10 | ColumnhmAgentRipRouteRedistDistList | read-write | current | Access-list number of the access-list, which filters routes received from a source-protocol. |
| 1.3.6.1.4.1.248.15.2.3.8.1.11 | ColumnhmAgentRipRouteRedistDistListConfigured | read-write | current | Flag to determine whether Access-list is configured or not. |
| 1.3.6.1.4.1.248.15.2.3.9 | TablehmAgentRip2IfConfTable | not-accessible | current | A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable in the RIPv2-MIB. |
| 1.3.6.1.4.1.248.15.2.3.9.1 | RowhmAgentRip2IfConfEntry | not-accessible | current | A Single Routing Domain in a single Subnet. Augments rip2IfConfEntry in RIPv2-MIB. |
| 1.3.6.1.4.1.248.15.2.3.9.1.1 | ColumnhmAgentRip2IfConfAuthKeyId | read-create | current | The identifier for the authentication key used on this interface. This field is only meaningful when the RIPv2-MIB rip2IfConfAuthType is md5(3); otherwise, the… |
| 1.3.6.1.4.1.248.15.2.3.10 | TablehmAgentRip2InterfaceTable | not-accessible | current | The hmAgentRip2InterfaceTable. |
| 1.3.6.1.4.1.248.15.2.3.10.1 | RowhmAgentRip2InterfaceEntry | not-accessible | current | The entry of the hmAgentRip2InterfaceTable. |
| 1.3.6.1.4.1.248.15.2.3.10.1.1 | ColumnhmAgentRip2InterfaceIfIndex | read-only | current | The IfIndex associated with this instance. |
| 1.3.6.1.4.1.248.15.2.3.10.1.2 | ColumnhmAgentRip2InterfaceAuthType | read-write | current | The type of Authentication used on this interface. |
| 1.3.6.1.4.1.248.15.2.3.10.1.3 | ColumnhmAgentRip2InterfaceAuthKey | read-write | current | The value to be used as the Authentication Key whenever the corresponding instance of hmAgentRip2InterfaceAuthType has a value other than noAuthentication. A m… |
| 1.3.6.1.4.1.248.15.2.3.10.1.4 | ColumnhmAgentRip2InterfaceAuthKeyId | read-write | current | The identifier for the authentication key used on this interface. This field is only meaningful when the hmAgentRip2InterfaceAuthType is md5(3); otherwise, the… |
| 1.3.6.1.4.1.248.15.2.3.10.1.5 | ColumnhmAgentRip2InterfaceSendVersion | read-write | current | What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates usi… |
| 1.3.6.1.4.1.248.15.2.3.10.1.6 | ColumnhmAgentRip2InterfaceReceiveVersion | read-write | current | This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets. |
| 1.3.6.1.4.1.248.15.2.3.10.1.7 | ColumnhmAgentRip2InterfaceAdminState | read-write | current | Enables/disables RIP on the interface |
| 1.3.6.1.4.1.248.15.2.3.10.1.8 | ColumnhmAgentRip2RcvBadPackets | read-only | current | ...... |
| 1.3.6.1.4.1.248.15.2.3.10.1.9 | ColumnhmAgentRip2RcvBadRoutes | read-only | current | .... |
| 1.3.6.1.4.1.248.15.2.3.10.1.10 | ColumnhmAgentRip2SentUpdates | read-only | current | .... |
| 1.3.6.1.4.1.248.15.2.3.50 | ScalarhmAgentRouterRipUpdateTimerInterval | read-write | current | Sets the RIP update timer interval in the router. This is the time in seconds between two full routing table update packets. |
| 1.3.6.1.4.1.248.15.2.4 | NodehmAgentRouterOspfConfigGroup | |||
| 1.3.6.1.4.1.248.15.2.4.1 | ScalarhmAgentOspfDefaultMetric | read-write | current | Default metric of redistributed routes, when OSPF redistributes from other protocols. |
| 1.3.6.1.4.1.248.15.2.4.2 | ScalarhmAgentOspfDefaultMetricConfigured | read-write | current | Flag to determine whether OSPF default-metric is configured or not. |
| 1.3.6.1.4.1.248.15.2.4.3 | ScalarhmAgentOspfDefaultInfoOriginate | read-write | current | Flag to determine, whether OSPF can advertise a default-route learned from another protocol. |
| 1.3.6.1.4.1.248.15.2.4.4 | ScalarhmAgentOspfDefaultInfoOriginateAlways | read-write | current | When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding … |
| 1.3.6.1.4.1.248.15.2.4.5 | ScalarhmAgentOspfDefaultInfoOriginateMetric | read-write | current | Metric of the default route,which OSPF advertises when learned from other protocol. |
| 1.3.6.1.4.1.248.15.2.4.6 | ScalarhmAgentOspfDefaultInfoOriginateMetricConfigured | read-write | current | Flag to determine whether OSPF default-info originate metric is configured or not. |
| 1.3.6.1.4.1.248.15.2.4.7 | ScalarhmAgentOspfDefaultInfoOriginateMetricType | read-write | current | Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2). |
| 1.3.6.1.4.1.248.15.2.4.8 | TablehmAgentOspfRouteRedistTable | not-accessible | current | This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be… |
| 1.3.6.1.4.1.248.15.2.4.8.1 | RowhmAgentOspfRouteRedistEntry | not-accessible | current | The entry of the hmAgentOspfRouteRedistTable. |
| 1.3.6.1.4.1.248.15.2.4.8.1.1 | ColumnhmAgentOspfRouteRedistSource | read-only | current | Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry. |
| 1.3.6.1.4.1.248.15.2.4.8.1.2 | ColumnhmAgentOspfRouteRedistMode | read-write | current | User enabels/disables route-redistribution for a particular source protocol. |
| 1.3.6.1.4.1.248.15.2.4.8.1.3 | ColumnhmAgentOspfRouteRedistMetric | read-write | current | Metric used for redistributing a particular source protocol route into OSPF. |
| 1.3.6.1.4.1.248.15.2.4.8.1.4 | ColumnhmAgentOspfRouteRedistMetricConfigured | read-write | current | Flag to determine whether OSPF redistribute-metric is configured or not. |
| 1.3.6.1.4.1.248.15.2.4.8.1.5 | ColumnhmAgentOspfRouteRedistMetricType | read-write | current | Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2). |
| 1.3.6.1.4.1.248.15.2.4.8.1.6 | ColumnhmAgentOspfRouteRedistTag | read-write | current | It specifies the tag field in routes redistributed by OSPF. |
| 1.3.6.1.4.1.248.15.2.4.8.1.7 | ColumnhmAgentOspfRouteRedistSubnets | read-write | current | If this value is false, then OSPF will not redistribute subnetted routes. |
| 1.3.6.1.4.1.248.15.2.4.8.1.8 | ColumnhmAgentOspfRouteRedistDistList | read-write | current | Access-list number of the access-list, which filters routes received from a source-protocol. |
| 1.3.6.1.4.1.248.15.2.4.8.1.9 | ColumnhmAgentOspfRouteRedistDistListConfigured | read-write | current | Flag to determine whether Access-list is configured or not. |
| 1.3.6.1.4.1.248.15.2.4.9 | TablehmAgentOspfIfTable | not-accessible | current | The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB. |
| 1.3.6.1.4.1.248.15.2.4.9.1 | RowhmAgentOspfIfEntry | not-accessible | current | The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB. |
| 1.3.6.1.4.1.248.15.2.4.9.1.1 | ColumnhmAgentOspfIfAuthKeyId | read-create | current | The identifier for the authentication key used on this interface. This field is only meaningful when the OSPF-MIB ospfIfAuthType is md5(2); otherwise, the valu… |
| 1.3.6.1.4.1.248.15.2.4.9.1.2 | ColumnhmAgentOspfIfIpMtuIgnoreFlag | read-write | current | Configures the IP MTU Ignore Flag value for this OSPF interface. |
| 1.3.6.1.4.1.248.15.2.4.10 | TablehmAgentOspfVirtIfTable | not-accessible | current | Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB. |
| 1.3.6.1.4.1.248.15.2.4.10.1 | RowhmAgentOspfVirtIfEntry | not-accessible | current | Information about a single Virtual Interface. Augments ospfVirtIfEntry in OSPF-MIB. |
| 1.3.6.1.4.1.248.15.2.4.10.1.1 | ColumnhmAgentOspfVirtIfAuthKeyId | read-create | current | The identifier for the authentication key used on this virtual interface. This field is only meaningful when the OSPF-MIB ospfVirtIfAuthType is md5(2); otherwi… |
| 1.3.6.1.4.1.248.15.2.4.11 | ScalarhmAgentRouterOspfRFC1583CompatibilityMode | read-write | current | From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'e… |
| 1.3.6.1.4.1.248.15.2.5 | NodehmAgentSnmpTrapFlagsConfigGroupLayer3 | |||
| 1.3.6.1.4.1.248.15.2.5.1 | ScalarhmAgentSnmpVRRPNewMasterTrapFlag | read-write | current | This flag enables the sending of VRRP new master notification traps. |
| 1.3.6.1.4.1.248.15.2.5.2 | ScalarhmAgentSnmpVRRPAuthFailureTrapFlag | read-write | current | This flag enables the sending of VRRP authentication failure notification traps. |
| 1.3.6.1.4.1.248.15.2.7 | NodehmAgentECMPGroup | |||
| 1.3.6.1.4.1.248.15.2.7.1 | ScalarhmAgentECMPOspfMaxPaths | read-write | current | It sets the number of paths that OSPF can report for a given destination where maxpaths is platform-dependent. |
| 1.3.6.1.4.1.248.15.2.8 | NodehmAgentRouterVrrpConfigGroup | |||
| 1.3.6.1.4.1.248.15.2.8.1 | ScalarhmAgentRouterVrrpAdminState | read-write | current | Sets the administrative mode of VRRP in the router. |
| 1.3.6.1.4.1.248.15.2.9 | NodehmVrrpExtGroup | |||
| 1.3.6.1.4.1.248.15.2.9.1 | TablehmVrrpTrackingTable | not-accessible | current | This table contains variables to define an entry in the VRRP Tracking database. |
| 1.3.6.1.4.1.248.15.2.9.1.1 | RowhmVrrpTrackingEntry | not-accessible | current | The entry of the hmVrrpTrackingTable. |
| 1.3.6.1.4.1.248.15.2.9.1.1.1 | ColumnhmVrrpTrackIfIndex | not-accessible | current | DURABLE: { 1:all } The interface number of the virtual router |
| 1.3.6.1.4.1.248.15.2.9.1.1.2 | ColumnhmVrrpTrackVrid | not-accessible | current | DURABLE: { 1:all } The virtual router id for this virtual router |
| 1.3.6.1.4.1.248.15.2.9.1.1.3 | ColumnhmVrrpTrackId | not-accessible | current | DURABLE: { 1:all } The id of the object being tracked |
| 1.3.6.1.4.1.248.15.2.9.1.1.4 | ColumnhmVrrpTrackDecrement | read-write | current | DURABLE: { 1:all } The value by wich the current priority of the virtual router is decremented when the tracked object goes DOWN. |
| 1.3.6.1.4.1.248.15.2.9.1.1.5 | ColumnhmVrrpTrackOperStatus | read-only | current | Shows if the tracked object is currently UP od DOWN |
| 1.3.6.1.4.1.248.15.2.9.1.1.6 | ColumnhmVrrpTrackRowStatus | read-create | current | DURABLE: { 1:all } Defines the status of a vrrp tracking database entry. Set to createAndGo(4) to create a new row. Set to destroy(6) to delete an entry. Reads… |
| 1.3.6.1.4.1.248.15.2.9.2 | TablehmVrrpExtTable | not-accessible | current | This table contains variables to define an entry in the VRRP enhancements database. |
| 1.3.6.1.4.1.248.15.2.9.2.1 | RowhmVrrpExtEntry | not-accessible | current | The entry of the hmVrrpExtTable. |
| 1.3.6.1.4.1.248.15.2.9.2.1.1 | ColumnhmVrrpExtIfIndex | not-accessible | current | DURABLE: { 1:all } The interface number of the virtual router |
| 1.3.6.1.4.1.248.15.2.9.2.1.2 | ColumnhmVrrpExtVrid | not-accessible | current | DURABLE: { 1:all } The virtual router id for this virtual router |
| 1.3.6.1.4.1.248.15.2.9.2.1.3 | ColumnhmVrrpExtDomainId | read-write | current | DURABLE: { 1:all } The domain this virtual router is a member of. If set to 0, the virtual router is not a member of any domain. |
| 1.3.6.1.4.1.248.15.2.9.2.1.4 | ColumnhmVrrpExtDomainRole | read-write | current | DURABLE: { 1:all } The role of this virtual router in its domain. This is none(1) if the virtual router is not member of a domain, supervisor(3) if it is the s… |
| 1.3.6.1.4.1.248.15.2.9.2.1.5 | ColumnhmVrrpExtDomainStatus | read-only | current | Shows if the domain configuration is correct for this virtual router |
| 1.3.6.1.4.1.248.15.2.9.2.1.6 | ColumnhmVrrpExtAdvertAddress | read-write | current | DURABLE: { 1:all } The IP address advertisements of the virtual router are sent to |
| 1.3.6.1.4.1.248.15.2.9.2.1.7 | ColumnhmVrrpExtAdvertTimer | read-write | current | DURABLE: { 1:all } This is used to set the interval between advertisements in milliseconds. This accesses the same value as vrrpOperAdvertisementInterval. |
| 1.3.6.1.4.1.248.15.2.9.2.1.8 | ColumnhmVrrpExtOperPriority | read-only | current | DURABLE: { 1:all } The current operating priority of the virtual router. This can be different from the configured priority if tracked objects are down. For do… |
| 1.3.6.1.4.1.248.15.2.9.2.1.9 | ColumnhmVrrpExtNotifyAddress | read-write | current | DURABLE: { 1:all } The IP address notifications of the virtual router are sent to |
| 1.3.6.1.4.1.248.15.2.9.2.1.10 | ColumnhmVrrpExtNotifyLinkdown | read-write | current | DURABLE: { 1:all } Enables or disables sending of notification messages if the virtual router's interface goes down. |
| 1.3.6.1.4.1.248.15.2.9.2.1.11 | ColumnhmVrrpExtPreemptionDelay | read-write | current | DURABLE: { 1:all } Time (in seconds) after startup of the virtual router by which the preemption of a Master with a lower priority is delayed. |
| 1.3.6.1.4.1.248.15.2.9.3 | TablehmVrrpDomainTable | not-accessible | current | This table contains variables to define an entry in the VRRP domain database. |
| 1.3.6.1.4.1.248.15.2.9.3.1 | RowhmVrrpDomainEntry | not-accessible | current | |
| 1.3.6.1.4.1.248.15.2.9.3.1.1 | ColumnhmVrrpDomainId | not-accessible | current | The domain ID. |
| 1.3.6.1.4.1.248.15.2.9.3.1.2 | ColumnhmVrrpDomainMemberSendAdv | read-write | current | DURABLE: { 1:all } Determines if the members of this domain send advertisement packets. If set to disabled(2), only the supervisor of the domain sends packets. |
| 1.3.6.1.4.1.248.15.2.9.3.1.3 | ColumnhmVrrpDomainStatus | read-only | current | Shows if the configuration of the domain is complete. |
| 1.3.6.1.4.1.248.15.2.9.3.1.4 | ColumnhmVrrpDomainSupervisorIfIndex | read-only | current | The interface number of the supervisor of the domain |
| 1.3.6.1.4.1.248.15.2.9.3.1.5 | ColumnhmVrrpDomainSupervisorVrid | read-only | current | The virtual router id of the supervisor of the domain |
| 1.3.6.1.4.1.248.15.2.9.3.1.6 | ColumnhmVrrpDomainOperPriority | read-only | current | The current operating priority of the domain. This can be different from the configured priority if tracked objects are down. For domain members this is the pr… |
| 1.3.6.1.4.1.248.15.2.9.3.1.7 | ColumnhmVrrpDomainSupervisorOperState | read-only | current | Shows the current operational state of the domain supervisor. |