MIB Viewer

HUAWEI-ADSL-MIB

381 objects
This MIB is used for defining Huawei's ADSL management MIB objects.
Imported Objects
ADSL-LINE-EXT-MIBadslLineExtEntry
ADSL-LINE-MIBadslAtucChanEntry adslAtucChanIntervalEntry adslAtucChanPerfDataEntry adslAtucIntervalEntry adslAtucPerfDataEntry adslAtucPhysEntry adslAturChanEntry adslAturChanIntervalEntry adslAturChanPerfDataEntry adslAturPhysEntry adslLineAlarmConfProfileEntry adslLineConfProfileEntry adslLineConfProfileName adslLineEntry adslLineMib adslMibObjects adslTraps
ADSL2-LINE-TC-MIBAdsl2PsdMaskDs Adsl2PsdMaskUs Adsl2SymbolProtection Adsl2TransmissionModeType
HUAWEI-DEVICE-MIBhwFrameIndex hwPortIndex hwSlotIndex hwSubslotIndex
HUAWEI-MIBhuaweiUtility
HUAWEI-TC-MIBhwAlarmId hwAlarmSn hwAlarmTime hwCauseId hwTrapType
HWMUSA-DEV-MIBhwIasConfigChangeTrapID
IF-MIBifIndex ifType
PerfHist-TC-MIBPerfIntervalCount
SNMPv2-MIBsysName
SNMPv2-SMICounter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime PhysAddress RowStatus TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.2.1.10.94.1.1.1.1.65536ScalarhwadslLineExtConfProfileread-writecurrentThe value of this object identifies the row in the ADSL Extend Line Configuration Profile Table, (adslLineExtConfProfileTable), which applies to this ADSL line…
1.3.6.1.2.1.10.94.1.1.1.1.65537ScalarhwadslLineDynamicProfileread-writecurrentThe value of this object identifies the row in the ADSL Dynamic Profile Table,which applies to this ADSL line, and channels if applicable. NULL - indicates tha…
1.3.6.1.2.1.10.94.1.1.2.1.65536ScalarhwAdslAtucCurrTransModeread-onlycurrentA set of ADSL line transmission modes.
1.3.6.1.2.1.10.94.1.1.2.1.65537ScalarhwAdslAtucCurrSignalAtnread-onlycurrentCurrent signal attenuation of the ATU-C, indicating the difference between the transmit signal of the ATU-R and the receive signal of the ATU-C. Range: 0-630 U…
1.3.6.1.2.1.10.94.1.1.3.1.65535ScalarhwadslAturTransmissionCapabilitiesread-onlycurrentThe ATU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' me…
1.3.6.1.2.1.10.94.1.1.3.1.65536ScalarhwAdslAturCurrSignalAtnread-onlycurrentThe signal attenuation value on ATUR: It indicates the difference between the transmit signal of the ATU-C and the receive signal of the ATU-R. Range: 0-630 Un…
1.3.6.1.2.1.10.94.1.1.4.1.65536ScalarhwadslAtucChanCurrINPread-onlycurrentIndicates Impulse Noise Protection on downstream direction. The value multiply 1/10000 is the real value. Unit: DMT Symbol
1.3.6.1.2.1.10.94.1.1.4.1.65537ScalarhwadslAtucChanRsSymbolsread-onlycurrentIndicates Reed-Solomon symbols on downstream direction. The value multiply 1/10000 is the real value. Unit: byte
1.3.6.1.2.1.10.94.1.1.4.1.65538ScalarhwadslAtucChanRsRedundancyread-onlycurrentIndicates Reed-Solomon redundancy on downstream direction. Unit: byte
1.3.6.1.2.1.10.94.1.1.4.1.65539ScalarhwadslAtucChanRsDepthread-onlycurrentIndicates Reed-Solomon depth on downstream direction. Unit: byte
1.3.6.1.2.1.10.94.1.1.4.1.65540ScalarhwadslAtucChanSymbolLengthread-onlycurrentIndicates the Bit Number of the DMT Symbol on downstream direction. Unit: bit
1.3.6.1.2.1.10.94.1.1.4.1.65541ScalarhwadslAtucChanPhyRrrcBitsread-onlycurrentThe bits in the channel that used to retransmission on downstream direction.
1.3.6.1.2.1.10.94.1.1.4.1.65542ScalarhwadslAtucChanPhyRtxQueueread-onlycurrentQueues in send buffer on downstream direction.
1.3.6.1.2.1.10.94.1.1.4.1.65543ScalarhwadslAtucChanRsSizeread-onlycurrentIndicates Reed-Solomon Codeword Size on downstream direction . Range: 0-255 Unit: byte
1.3.6.1.2.1.10.94.1.1.4.1.65544ScalarhwadslAtucChanCodeGainread-onlycurrentIndicates Code Gain on downstream direction. It ranges from 0 to 16 units of 0.5 dB (physical values are 0 to 8 dB).
1.3.6.1.2.1.10.94.1.1.4.1.65545ScalarhwadslAtucChanPcbread-onlycurrentIndicates Power Cut-back on downstream direction. It ranges from 0 to 400 units of 0.1 dB(physical values are 0 to 40 dB). Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.5.1.65536ScalarhwadslAturChanCurrINPread-onlycurrentIndicates Impulse Noise Protection on upstream direction. The value multiply 1/10000 is the real value. Unit: DMT Symbol
1.3.6.1.2.1.10.94.1.1.5.1.65537ScalarhwadslAturChanRsSymbolsread-onlycurrentIndicates Reed-Solomon symbols on upstream direction. The value multiply 1/10000 is the real value. Unit: byte
1.3.6.1.2.1.10.94.1.1.5.1.65538ScalarhwadslAturChanRsRedundancyread-onlycurrentIndicates Reed-Solomon redundancy on upstream direction. Unit: byte
1.3.6.1.2.1.10.94.1.1.5.1.65539ScalarhwadslAturChanRsDepthread-onlycurrentIndicates Reed-Solomon depth on upstream direction. Unit: byte
1.3.6.1.2.1.10.94.1.1.5.1.65540ScalarhwadslAturChanSymbolLengthread-onlycurrentIndicates the Bit Number of the DMT Symbol on upstream direction. Unit: bit
1.3.6.1.2.1.10.94.1.1.5.1.65541ScalarhwadslAturChanPhyRrrcBitsread-onlycurrentThe bits in the channel that used to retransmission on upstream direction.
1.3.6.1.2.1.10.94.1.1.5.1.65542ScalarhwadslAturChanPhyRtxQueueread-onlycurrentQueues in send buffer on upstream direction.
1.3.6.1.2.1.10.94.1.1.5.1.65543ScalarhwadslAturChanRsSizeread-onlycurrentIndicates Reed-Solomon Codeword Size on upstream direction. Range: 0-255 Unit: byte
1.3.6.1.2.1.10.94.1.1.5.1.65544ScalarhwadslAturChanCodeGainread-onlycurrentIndicates Code Gain on upstream direction. It ranges from 0 to 16 units of 0.5 dB (physical values are 0 to 8 dB).
1.3.6.1.2.1.10.94.1.1.6.1.65535ScalarhwAdslAtucPerfFailFullInitsread-onlycurrentCount of the line initialization failed attempts since agent reset.
1.3.6.1.2.1.10.94.1.1.6.1.65536ScalarhwAdslAtucPerfCurr15MinFailFullInitsread-onlycurrentCount of the line initialization failed attempts in the current 15 minute interval.
1.3.6.1.2.1.10.94.1.1.6.1.65537ScalarhwAdslAtucPerfCurr1DayFailFullInitsread-onlycurrentCount of the line initialization failed attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed.
1.3.6.1.2.1.10.94.1.1.6.1.65538ScalarhwAdslAtucPerfPrev1DayFailFullInitsread-onlycurrentCount of the line initialization failed attempts in the most recent previous 1-day period.
1.3.6.1.2.1.10.94.1.1.8.1.65535ScalarhwAdslAtucIntervalFailFullInitsread-onlycurrentCount of the line initialization failed attempts during the interval.
1.3.6.1.2.1.10.94.1.1.10.1.65536ScalarhwadslAtucChanFecBlksread-onlycurrentCount of all blocks received with FEC anomalies since agent reset.
1.3.6.1.2.1.10.94.1.1.10.1.65537ScalarhwadslAtucChanHecBlksread-onlycurrentCount of all blocks received with HEC anomalies since agent reset.
1.3.6.1.2.1.10.94.1.1.10.1.65538ScalarhwadslAtucChanCrcBlksread-onlycurrentCount of all blocks received with CRC anomalies since agent reset.
1.3.6.1.2.1.10.94.1.1.10.1.65539ScalarhwadslAtucChanPerfCurr15MinFecBlksread-onlycurrentCount of all blocks received with FEC anomalies on this channel within the current 15 minute interval.
1.3.6.1.2.1.10.94.1.1.10.1.65540ScalarhwadslAtucChanPerfCurr15MinHecBlksread-onlycurrentCount of all blocks received with HEC anomalies on this channel within the current 15 minute interval.
1.3.6.1.2.1.10.94.1.1.10.1.65541ScalarhwadslAtucChanPerfCurr15MinCrcBlksread-onlycurrentCount of all blocks received with CRC anomalies on this channel within the current 15 minute interval.
1.3.6.1.2.1.10.94.1.1.10.1.65542ScalarhwadslAtucChanPerfCurr1DayFecBlksread-onlycurrentCount of all blocks received with FEC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
1.3.6.1.2.1.10.94.1.1.10.1.65543ScalarhwadslAtucChanPerfCurr1DayHecBlksread-onlycurrentCount of all blocks received with HEC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
1.3.6.1.2.1.10.94.1.1.10.1.65544ScalarhwadslAtucChanPerfCurr1DayCrcBlksread-onlycurrentCount of all blocks received with CRC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
1.3.6.1.2.1.10.94.1.1.10.1.65545ScalarhwadslAtucChanPerfPrev1DayFecBlksread-onlycurrentCount of all blocks received with FEC anomalies on this channel within the most recent previous 1-day period.
1.3.6.1.2.1.10.94.1.1.10.1.65546ScalarhwadslAtucChanPerfPrev1DayHecBlksread-onlycurrentCount of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period.
1.3.6.1.2.1.10.94.1.1.10.1.65547ScalarhwadslAtucChanPerfPrev1DayCrcBlksread-onlycurrentCount of all blocks received with CRC anomalies on this channel within the most recent previous 1-day period.
1.3.6.1.2.1.10.94.1.1.10.1.65548ScalarhwadslAtucChanRtxCWread-onlycurrentCount of units request retransmission since agent reset.
1.3.6.1.2.1.10.94.1.1.10.1.65549ScalarhwadslAtucChanRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission since agent reset.
1.3.6.1.2.1.10.94.1.1.10.1.65550ScalarhwadslAtucChanRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission since agent reset.
1.3.6.1.2.1.10.94.1.1.10.1.65551ScalarhwadslAtucChanPerfCurr15MinRtxCWread-onlycurrentCount of units request retransmission on this channel within the current 15 minute interval.
1.3.6.1.2.1.10.94.1.1.10.1.65552ScalarhwadslAtucChanPerfCurr15MinRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission on this channel within the current 15 minute interval.
1.3.6.1.2.1.10.94.1.1.10.1.65553ScalarhwadslAtucChanPerfCurr15MinRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission on this channel within the current 15 minute interval.
1.3.6.1.2.1.10.94.1.1.10.1.65554ScalarhwadslAtucChanPerfCurr1DayRtxCWread-onlycurrentCount of units request retransmission on this channel during the current day.
1.3.6.1.2.1.10.94.1.1.10.1.65555ScalarhwadslAtucChanPerfCurr1DayRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission on this channel during the current day.
1.3.6.1.2.1.10.94.1.1.10.1.65556ScalarhwadslAtucChanPerfCurr1DayRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission on this channel during the current day.
1.3.6.1.2.1.10.94.1.1.10.1.65557ScalarhwadslAtucChanPerfPrev1DayRtxCWread-onlycurrentCount of units request retransmission on this channel within the most recent previous 1-day period.
1.3.6.1.2.1.10.94.1.1.10.1.65558ScalarhwadslAtucChanPerfPrev1DayRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission on this channel within the most recent previous 1-day period.
1.3.6.1.2.1.10.94.1.1.10.1.65559ScalarhwadslAtucChanPerfPrev1DayRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission on this channel within the most recent previous 1-day period.
1.3.6.1.2.1.10.94.1.1.11.1.65536ScalarhwadslAturChanFecBlksread-onlycurrentCount of all blocks received with FEC anomalies since agent reset.
1.3.6.1.2.1.10.94.1.1.11.1.65537ScalarhwadslAturChanHecBlksread-onlycurrentCount of all blocks received with HEC anomalies since agent reset.
1.3.6.1.2.1.10.94.1.1.11.1.65538ScalarhwadslAturChanCrcBlksread-onlycurrentCount of all blocks received with CRC anomalies since agent reset.
1.3.6.1.2.1.10.94.1.1.11.1.65539ScalarhwadslAturChanPerfCurr15MinFecBlksread-onlycurrentCount of all blocks received with FEC anomalies on this channel within the current 15 minute interval.
1.3.6.1.2.1.10.94.1.1.11.1.65540ScalarhwadslAturChanPerfCurr15MinHecBlksread-onlycurrentCount of all blocks received with HEC anomalies on this channel within the current 15 minute interval.
1.3.6.1.2.1.10.94.1.1.11.1.65541ScalarhwadslAturChanPerfCurr15MinCrcBlksread-onlycurrentCount of all blocks received with CRC anomalies on this channel within the current 15 minute interval.
1.3.6.1.2.1.10.94.1.1.11.1.65542ScalarhwadslAturChanPerfCurr1DayFecBlksread-onlycurrentCount of all blocks received with FEC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
1.3.6.1.2.1.10.94.1.1.11.1.65543ScalarhwadslAturChanPerfCurr1DayHecBlksread-onlycurrentCount of all blocks received with HEC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
1.3.6.1.2.1.10.94.1.1.11.1.65544ScalarhwadslAturChanPerfCurr1DayCrcBlksread-onlycurrentCount of all blocks received with CRC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
1.3.6.1.2.1.10.94.1.1.11.1.65545ScalarhwadslAturChanPerfPrev1DayFecBlksread-onlycurrentCount of all blocks received with FEC anomalies on this channel within the most recent previous 1-day period.
1.3.6.1.2.1.10.94.1.1.11.1.65546ScalarhwadslAturChanPerfPrev1DayHecBlksread-onlycurrentCount of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period.
1.3.6.1.2.1.10.94.1.1.11.1.65547ScalarhwadslAturChanPerfPrev1DayCrcBlksread-onlycurrentCount of all blocks received with CRC anomalies on this channel within the most recent previous 1-day period.
1.3.6.1.2.1.10.94.1.1.11.1.65548ScalarhwadslAturChanRtxCWread-onlycurrentCount of units request retransmission since agent reset.
1.3.6.1.2.1.10.94.1.1.11.1.65549ScalarhwadslAturChanRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission since agent reset.
1.3.6.1.2.1.10.94.1.1.11.1.65550ScalarhwadslAturChanRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission since agent reset.
1.3.6.1.2.1.10.94.1.1.11.1.65551ScalarhwadslAturChanPerfCurr15MinRtxCWread-onlycurrentCount of units request retransmission on this channel within the current 15 minute interval.
1.3.6.1.2.1.10.94.1.1.11.1.65552ScalarhwadslAturChanPerfCurr15MinRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission on this channel within the current 15 minute interval.
1.3.6.1.2.1.10.94.1.1.11.1.65553ScalarhwadslAturChanPerfCurr15MinRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission on this channel within the current 15 minute interval.
1.3.6.1.2.1.10.94.1.1.11.1.65554ScalarhwadslAturChanPerfCurr1DayRtxCWread-onlycurrentCount of units request retransmission on this channel during the current day.
1.3.6.1.2.1.10.94.1.1.11.1.65555ScalarhwadslAturChanPerfCurr1DayRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission on this channel during the current day.
1.3.6.1.2.1.10.94.1.1.11.1.65556ScalarhwadslAturChanPerfCurr1DayRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission on this channel during the current day.
1.3.6.1.2.1.10.94.1.1.11.1.65557ScalarhwadslAturChanPerfPrev1DayRtxCWread-onlycurrentCount of units request retransmission on this channel within the most recent previous 1-day period.
1.3.6.1.2.1.10.94.1.1.11.1.65558ScalarhwadslAturChanPerfPrev1DayRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission on this channel within the most recent previous 1-day period.
1.3.6.1.2.1.10.94.1.1.11.1.65559ScalarhwadslAturChanPerfPrev1DayRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission on this channel within the most recent previous 1-day period.
1.3.6.1.2.1.10.94.1.1.12.1.65536ScalarhwadslAtucChanIntervalFecBlksread-onlycurrentCount of all blocks received with FRC anomalies on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.12.1.65537ScalarhwadslAtucChanIntervalHecBlksread-onlycurrentCount of all blocks received with HRC anomalies on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.12.1.65538ScalarhwadslAtucChanIntervalCrcBlksread-onlycurrentCount of all blocks received with CRC anomalies on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.12.1.65539ScalarhwadslAtucChanIntervalRtxCWread-onlycurrentCount of units request retransmission on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.12.1.65540ScalarhwadslAtucChanIntervalRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.12.1.65541ScalarhwadslAtucChanIntervalRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.13.1.65536ScalarhwadslAturChanIntervalFecBlksread-onlycurrentCount of all blocks received with FRC anomalies on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.13.1.65537ScalarhwadslAturChanIntervalHecBlksread-onlycurrentCount of all blocks received with HRC anomalies on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.13.1.65538ScalarhwadslAturChanIntervalCrcBlksread-onlycurrentCount of all blocks received with CRC anomalies on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.13.1.65539ScalarhwadslAturChanIntervalRtxCWread-onlycurrentCount of units request retransmission on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.13.1.65540ScalarhwadslAturChanIntervalRtxCorrectedCWread-onlycurrentCount of units corrected by retransmission on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.13.1.65541ScalarhwadslAturChanIntervalRtxUncorrectedCWread-onlycurrentCount of units uncorrected by retransmission on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.14.1.65536ScalarhwAdslAtucConfDownBitSwapread-createcurrentEnables and disables the down bitswap of a template. Options: 1. enabled(1) - Indicates that the downstream bit swap is enabled 2. disabled(2) - Indicates that…
1.3.6.1.2.1.10.94.1.1.14.1.65537ScalarhwAdslAtucConfUpBitSwapread-createcurrentEnables and disables the up bitswap of a template. Options: 1. enabled(1) - Indicates that the upstream bit swap is enabled 2. disabled(2) - Indicates that the…
1.3.6.1.2.1.10.94.1.1.14.1.65538ScalarhwAdslTrellionsModeEnableread-createcurrentEnables and disables the Trellions mode. Options: 1. enabled(1) - Indicates that the trellis coding is enabled 2. disabled(2) - Indicates that the trellis codi…
1.3.6.1.2.1.10.94.1.1.14.1.65539ScalarhwAdslTransmissionModeread-createcurrentIndicates the transmission mode of this channel. Options: 1. all(1) - All (G992.1, G992.2, T1.413)(Default) 2. fullRate(2) - Full rate(G992.1 or T1.413) 3. gli…
1.3.6.1.2.1.10.94.1.1.15.1.65536ScalarhwadslLineAlarmConfProfileDyingGaspread-createcurrentThis object enables/disables the report of LOSS-OF-POWER alarm in an ADSL line, This object is defaulted enable(1). Options: 1. enable (1) - The LOSS-OF-POWER …
1.3.6.1.2.1.10.94.1.1.65536TablehwAdslLinePvcTablenot-accessiblecurrentPVC configuration table of the ADSL port and used to configure the VPI and VCI of the ADSL port. The indexes of this table are ifIndex,hwAdsllinePvcVpi,and hwA…
1.3.6.1.2.1.10.94.1.1.65536.1RowhwAdslLinePvcEntrynot-accessiblecurrentPVC configuration table of the ADSL port and used to configure the VPI and VCI of the ADSL port. The indexes of this entry are ifIndex,hwAdsllinePvcVpi,and hwA…
1.3.6.1.2.1.10.94.1.1.65536.1.1ColumnhwAdsllinePvcVpiread-onlycurrentThe VPI of the adsl line.
1.3.6.1.2.1.10.94.1.1.65536.1.2ColumnhwAdslLinePvcVciread-onlycurrentThe VCI of the adsl line.
1.3.6.1.2.1.10.94.1.1.65536.1.3ColumnhwAdslLinePvcVlanIdread-writecurrentThe VLAN ID of the adsl line PVC. Range: 1-4000
1.3.6.1.2.1.10.94.1.1.65536.1.4ColumnhwAdslLinePvcPriorityread-writecurrentThe Priority value of the adsl line PVC. Range: 0-7
1.3.6.1.2.1.10.94.1.1.65536.1.5ColumnhwAdslLinePvcDsBandread-writecurrentThe down stream band of the adsl line PVC. Range: 0-450
1.3.6.1.2.1.10.94.1.1.65536.1.6ColumnhwAdslLinePvcUsBandread-writecurrentThe up stream band of the adsl line PVC. Range: 0-450
1.3.6.1.2.1.10.94.1.1.65536.1.7ColumnhwAdslLinePvcMCastEnableread-writecurrentThis object allows the adsl line PVC to support multicast. Options: 1. enable(1) - Indicates that the PVC of the ADSL port is enabled to support the multicast …
1.3.6.1.2.1.10.94.1.1.65536.1.8ColumnhwAdslLinePvcIGMPEnableread-writecurrentThis object allows the adsl line PVC to support IGMP. Options: 1. enable(1) - Indicates that the PVC of the ADSL port is enabled to support IGMP 2. disable(2) …
1.3.6.1.2.1.10.94.1.1.65536.1.9ColumnhwAdslLinePvcIndexread-writecurrentThe index of the adsl line PVC. Range: 1-8
1.3.6.1.2.1.10.94.1.1.65536.1.10ColumnhwAdslLinePvcConnectTyperead-onlycurrentThe Connected type of the adsl line PVC. Options: 1. auto(0) - The Connected type of the adsl line PVC is auto 2. llc1483B(1) - The Connected type of the adsl …
1.3.6.1.2.1.10.94.1.1.65536.1.11ColumnhwAdslLinePvcRowStatusread-createcurrentRow status. Add or delete a table item.
1.3.6.1.2.1.10.94.1.1.65537TablehwAdslLineBitAllocationTablenot-accessiblecurrentThe hwAdslLineBitAllocationTable contains the detailed bit-allocation information for the current link. This information can be used to determine whether a giv…
1.3.6.1.2.1.10.94.1.1.65537.1RowhwAdslLineBitAllocationEntrynot-accessiblecurrentThe hwAdslLineBitAllocationTable contains the detailed bit-allocation information for the current link. This information can be used to determine whether a giv…
1.3.6.1.2.1.10.94.1.1.65537.1.1ColumnhwAdslLineDownStreamBitsPerFrameread-onlycurrentNumber of bits required per frame in the downstream data path for the current configuration.
1.3.6.1.2.1.10.94.1.1.65537.1.2ColumnhwAdslLineUpStreamBitsPerFrameread-onlycurrentNumber of bits required per frame in the upstream data path for the current configuration.
1.3.6.1.2.1.10.94.1.1.65537.1.3ColumnhwAdslLineDownStreamBitAllocLowread-onlycurrentwhen used to Adsl board This object contains the first 128 downstream sub-carrier bit allocations (sub-carrier # 1-128). This object is 64 bytes in length, whe…
1.3.6.1.2.1.10.94.1.1.65537.1.4ColumnhwAdslLineDownStreamBitAllocHighread-onlycurrentwhen used to Adsl board This object contains the second 128 downstream sub-carrier bit allocations (sub-carrier # 129-256). This object is 64 bytes in length, …
1.3.6.1.2.1.10.94.1.1.65537.1.5ColumnhwAdslLineUpStreamBitAllocread-onlycurrentwhen used to Adsl board This Object contains 64 upstream sub-carrier bit allocations (sub-carrier # 1-64). This Object is 32 bytes in length, where each byte c…
1.3.6.1.2.1.10.94.1.1.65538TablehwXdslPortTablenot-accessiblecurrentThis table includes xDSL(e.g. adsl,g.shdsl,vdsl...)port information, Used to support common attributes of the ADSL, G.SHDSL, and VDSL ports. The index of this …
1.3.6.1.2.1.10.94.1.1.65538.1RowhwXdslPortEntrynot-accessiblecurrentThis table includes xDSL(e.g. adsl,g.shdsl,vdsl...)port information, Used to support common attributes of the ADSL, G.SHDSL, and VDSL ports. The index of this …
1.3.6.1.2.1.10.94.1.1.65538.1.1ColumnhwXdslPortMaxMacLearnread-writecurrentSet Max MAC count on the XDSL port. Range: 0-255 Default: 255
1.3.6.1.2.1.10.94.1.1.65538.1.2ColumnhwXdslPortRateMonitorThresholdread-writecurrentSet Port monitoring rate threshold percent. Including upstream and downstream. Range: 0-100 Default: 0
1.3.6.1.2.1.10.94.1.1.65538.1.4ColumnhwXdslPortUpThresholdTxRateread-writecurrentSet Port monitoring upstream rate threshold value. Default: 0 Unit: bps
1.3.6.1.2.1.10.94.1.1.65538.1.5ColumnhwXdslPortDownThresholdTxRateread-writecurrentSet Port monitoring downstream rate threshold value. Default: 0 Unit: bps
1.3.6.1.2.1.10.94.1.1.65538.1.6ColumnhwXdslPortRateMonitorAlarmEnableread-writecurrentEnables/Disables port rate monitor alarm. Options: 1. enabled(1) - The port rate monitor alarm is enabled 2. disabled(2) - The port rate monitor alarm is disab…
1.3.6.1.2.1.10.94.1.1.65538.1.7ColumnhwXdslPortUpTimeread-onlycurrentDuration of the xDSL port activation. Unit: seconds
1.3.6.1.2.1.10.94.1.1.65538.1.8ColumnhwXdslPortNTEPowerStatusread-onlycurrentNTE power status, this object is defaulted off(2). Options: 1. on(1) - NTE power on 2. off(2) - NTE power off 3. unknown(3) - Unknown status
1.3.6.1.2.1.10.94.1.1.65538.1.500ColumnhwXdslPortCurrentUpRateaccessible-for-notifycurrentXdsl Port Current Upstream Value. Range: 0-30000 Default: 0
1.3.6.1.2.1.10.94.1.1.65538.1.501ColumnhwXdslPortCurrentDownRateaccessible-for-notifycurrentXdsl Port Current Downstream Value. Range: 0-30000 Default: 0
1.3.6.1.2.1.10.94.1.1.65538.1.600ColumnhwXdslPortFarEndRunStateread-onlycurrentXdsl port far end Run state, This object is defaulted unknown(1). Options: 1. unknown(1) - Unknown status 2. noModem(2) - Port is not connected to modem 3. han…
1.3.6.1.2.1.10.94.1.1.65538.1.601ColumnhwXdslPortPowerStateread-onlycurrentXdsl port power state. Options: 1. l0(1) - Full-on state 2. l2(2) - Low power state 3. l3(3) - Idle state 4. l1(4) - Low power state 5. invalidValue(-1) - Inva…
1.3.6.1.2.1.10.94.1.1.65538.1.700ColumnhwXdslPortUpCntread-onlycurrentThe up counts of Xdsl port.
1.3.6.1.2.1.10.94.1.1.65538.1.701ColumnhwXdslPortUpCntAdminStatusread-writecurrentAdmin the up counts of xDSL port. Options: 1. reset(0) - Reset the up counts of xDSL port
1.3.6.1.2.1.10.94.1.1.65538.1.702ColumnhwXdslPortLastUpTimeread-onlycurrentLast up time of a Xdsl port.
1.3.6.1.2.1.10.94.1.1.65538.1.703ColumnhwXdslPortLastDownTimeread-onlycurrentLast down time of a Xdsl port.
1.3.6.1.2.1.10.94.1.1.65538.1.704ColumnhwXdslPortClearUpCntTimeread-onlycurrentThe time when up counts of a Xdsl port is cleared.
1.3.6.1.2.1.10.94.1.1.65538.1.705ColumnhwXdslPortRetrainCntread-onlycurrentThe retrain counts of Xdsl Line.
1.3.6.1.2.1.10.94.1.1.65538.1.706ColumnhwXdslPortLastRetrainReasonread-onlycurrentThe last retrain reson of Xdsl Line, coded as bit mask. Only one bit can be set valid, all bits set valid means invalid retrain reason.
1.3.6.1.2.1.10.94.1.1.65538.1.800ColumnhwXdslPortLoopFlagread-onlycurrentLoop flag. Options: 1. false(0) - No loop 2. true (1) - Loop
1.3.6.1.2.1.10.94.1.1.65538.1.810ColumnhwXdslPortUpThresholdread-writecurrentSet Port monitoring upstream rate threshold percent value. Range: 0-100
1.3.6.1.2.1.10.94.1.1.65538.1.811ColumnhwXdslPortDownThresholdread-writecurrentSet Port monitoring downstream rate threshold percent value. Range: 0-100
1.3.6.1.2.1.10.94.1.1.65539TablehwAdslLinePreActParaTablenot-accessiblecurrentThis table provides one row for each ADSL PORT. Each row contains the preactived Parameters. The index of this table is ifIndex.
1.3.6.1.2.1.10.94.1.1.65539.1RowhwAdslLinePreActParaEntrynot-accessiblecurrentThis table provides one row for each ADSL PORT. Each row contains the preactived Parameters. The index of this entry is ifIndex.
1.3.6.1.2.1.10.94.1.1.65539.1.1ColumnhwAdslAtucPrevSnrMgnread-onlycurrentNoise Margin as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65539.1.2ColumnhwAdslAturPrevSnrMgnread-onlycurrentNoise Margin as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65539.1.3ColumnhwAdslAtucPrevAttainableRateread-onlycurrentIndicates the maximum attainable data rate by the ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: bps
1.3.6.1.2.1.10.94.1.1.65539.1.4ColumnhwAdslAturPrevAttainableRateread-onlycurrentIndicates the maximum attainable data rate by the ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: bps
1.3.6.1.2.1.10.94.1.1.65539.1.5ColumnhwAdslAtucPreAtnread-onlycurrentMeasured difference in the total power transmitted as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. in tenth dB. Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65539.1.6ColumnhwAdslAturPreAtnread-onlycurrentMeasured difference in the total power transmitted as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. in tenth dB. Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65539.1.7ColumnhwAdslPreActiveTimeread-onlycurrentThe last time at that the port was activated.
1.3.6.1.2.1.10.94.1.1.65540TablehwPortThreePriorityTablenot-accessibleobsoleteAdsl port three priority table. The index of this table is ifIndex.
1.3.6.1.2.1.10.94.1.1.65540.1RowhwPortThreePriorityEntrynot-accessibleobsoleteAdsl port three priority table. The index of this entry is ifIndex.
1.3.6.1.2.1.10.94.1.1.65540.1.1ColumnhwPortThreePriorityEnableread-writeobsoleteThree Priority status of the interface. Options: 1. enable(1) - Adsl port three priority is enabled 2. disable(2) - Adsl port three priority is disabled
1.3.6.1.2.1.10.94.1.1.65541TablehwSlotMacMaxNoLimitTablenot-accessibleobsoleteMax mac learning no limit table. The index of this table is hwFrameIndex and hwSlotIndex.
1.3.6.1.2.1.10.94.1.1.65541.1RowhwSlotMacMaxNoLimitEntrynot-accessibleobsoleteMax mac learning no limit table. The index of this entry is hwFrameIndex and hwSlotIndex.
1.3.6.1.2.1.10.94.1.1.65541.1.1ColumnhwSlotMacMaxNoLimitEnableread-writeobsoleteThis object is used to set whether all the ports in the slot limits the maximum number of learning MAC addresses. Options: 1. enable(1) - Don't limit the max N…
1.3.6.1.2.1.10.94.1.1.65542TablehwXdslPortStateStatisticTablenot-accessiblecurrentXDSL port state statistic table, used to support the statistics information about the status mapping and status of ports on the service boards, such as the ADS…
1.3.6.1.2.1.10.94.1.1.65542.1RowhwXdslPortStateStatisticEntrynot-accessiblecurrentXDSL port state statistic table, used to support the statistics information about the status mapping and status of ports on the service boards, such as the ADS…
1.3.6.1.2.1.10.94.1.1.65542.1.1ColumnhwXdslPortStatePortNumberread-onlycurrentThis Object is Port Number of One Slot.
1.3.6.1.2.1.10.94.1.1.65542.1.2ColumnhwXdslPortStateBitmapListread-onlycurrentThe type of port status: 2 failed; 8 testing; 9 activated; 10 activating; 11 deactivated; 18 localloopback; 19 remoteloopback; 20 blocked; 37 utopialoopback; 3…
1.3.6.1.2.1.10.94.1.1.65542.1.3ColumnhwXdslTotalOfActivatedPortsread-onlycurrentThe total of the activated ports.
1.3.6.1.2.1.10.94.1.1.65542.1.4ColumnhwXdslTotalOfDeactivatedPortsread-onlycurrentThe total of the deactivated ports.
1.3.6.1.2.1.10.94.1.1.65542.1.5ColumnhwXdslTotalOfActivatingPortsread-onlycurrentThe total of the activating ports.
1.3.6.1.2.1.10.94.1.1.65542.1.6ColumnhwXdslTotalOfTestingPortsread-onlycurrentThe total of the Testing ports.
1.3.6.1.2.1.10.94.1.1.65542.1.7ColumnhwXdslTotalOfBlockedPortsread-onlycurrentThe total of the blocked ports.
1.3.6.1.2.1.10.94.1.1.65542.1.8ColumnhwXdslTotalOfLocalLoopbackPortsread-onlycurrentThe total of the local testing ports.
1.3.6.1.2.1.10.94.1.1.65542.1.9ColumnhwXdslTotalOfRemoteLoopbackPortsread-onlycurrentThe total of the remote testing ports.
1.3.6.1.2.1.10.94.1.1.65542.1.10ColumnhwXdslTotalOfFailedPortsread-onlycurrentThe total of the failed ports.
1.3.6.1.2.1.10.94.1.1.65542.1.11ColumnhwXdslTotalOfUnknownPortsread-onlycurrentThe total of the unknown testing ports.
1.3.6.1.2.1.10.94.1.1.65543TablehwadslLineExtConfProfileTablenot-accessiblecurrentThis table contains information on the ADSL extend line configuration. One entry in this table reflects a extend line profile defined by a manager which can be…
1.3.6.1.2.1.10.94.1.1.65543.1RowhwadslLineExtConfProfileEntrynot-accessiblecurrentThis table contains information on the ADSL extend line configuration. One entry in this table reflects a extend line profile defined by a manager which can be…
1.3.6.1.2.1.10.94.1.1.65543.1.1ColumnhwadslLineExtConfProfileNamenot-accessiblecurrentThis object is used by the hwadslLineExtConfProfileTable in order to identify a row of this table. This object indicates the name of the extended line profile.
1.3.6.1.2.1.10.94.1.1.65543.1.2ColumnhwadslLineDisableToneSection1Beginread-createcurrentThe begin index of section1. Range: 0-511
1.3.6.1.2.1.10.94.1.1.65543.1.3ColumnhwadslLineDisableToneSection1Endread-createcurrentThe end index of section1. Range: 0-511
1.3.6.1.2.1.10.94.1.1.65543.1.4ColumnhwadslLineDisableToneSection1Flagread-createcurrentThe enable flag of section1. Options: 1. enabled(1) - The first tone section is enabled 2. disabled(2) - The first tone section is disabled
1.3.6.1.2.1.10.94.1.1.65543.1.5ColumnhwadslLineDisableToneSection2Beginread-createcurrentThe begin index of section2. Range: 0-511
1.3.6.1.2.1.10.94.1.1.65543.1.6ColumnhwadslLineDisableToneSection2Endread-createcurrentThe end index of section2. Range: 0-511
1.3.6.1.2.1.10.94.1.1.65543.1.7ColumnhwadslLineDisableToneSection2Flagread-createcurrentThe enable flag of section2. Options: 1. enabled(1) - The second tone section is enabled 2. disabled(2) - The second tone section is disabled
1.3.6.1.2.1.10.94.1.1.65543.1.8ColumnhwadslLineDisableToneSection3Beginread-createcurrentThe begin index of section3. Range: 0-511
1.3.6.1.2.1.10.94.1.1.65543.1.9ColumnhwadslLineDisableToneSection3Endread-createcurrentThe end index of section3. Range: 0-511
1.3.6.1.2.1.10.94.1.1.65543.1.10ColumnhwadslLineDisableToneSection3Flagread-createcurrentThe enable flag of the third section. Options: 1. enabled(1) - The third tone section is enabled 2. disabled(2) - The third tone section is disabled
1.3.6.1.2.1.10.94.1.1.65543.1.11ColumnhwadslLineDisableToneSection4Beginread-createcurrentThe begin index of the fourth section. Range: 0-511
1.3.6.1.2.1.10.94.1.1.65543.1.12ColumnhwadslLineDisableToneSection4Endread-createcurrentThe end index of the fourth section. Range: 0-511
1.3.6.1.2.1.10.94.1.1.65543.1.13ColumnhwadslLineDisableToneSection4Flagread-createcurrentThe enable flag of the fourth section. Range: 0-511 Options: 1. enabled(1) - The fourth tone section is enabled 2. disabled(2) - The fourth tone section is dis…
1.3.6.1.2.1.10.94.1.1.65543.1.14Columnhwadsl2ChConfProfMinProtectionDsread-writecurrentMinimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can …
1.3.6.1.2.1.10.94.1.1.65543.1.15Columnhwadsl2ChConfProfMinProtectionUsread-writecurrentMinimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can ta…
1.3.6.1.2.1.10.94.1.1.65543.1.16ColumnhwAdslExtDsMinTrainSnrMgnread-createcurrentMaximum Trainning Margin in downstream. Range: 0-310 Default: 30 Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65543.1.17ColumnhwAdslExtUsMinTrainSnrMgnread-createcurrentMaximum Trainning Margin in upstream. Range: 0-310 Default: 30 Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65543.1.18ColumnhwAdslExtDsMaxPsdread-createcurrentMaximum PSD margin in downstream.
1.3.6.1.2.1.10.94.1.1.65543.1.19Columnhwadsl2TSSiPsdMaskDsread-writecurrentThe downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G992.3 or G992.5 and it may impose PSD restrictions (breakpoint…
1.3.6.1.2.1.10.94.1.1.65543.1.20Columnhwadsl2TranMissionStardardMaskread-writecurrentThe tranmission stardard mask. The Mask bit and the corresponding Transmission Standard: 0x 1 1 1 1 1 1 ETSI T1.413 G992.5 G992.3 G992.2 G992.1 The Default Bit…
1.3.6.1.2.1.10.94.1.1.65543.1.21Columnhwadsl2TransMissionAnnexMaskread-writecurrentThe transMission annex Mask. The Mask bit and the corresponding Transmission Annex: 0x 1 1 1 1 1 Annex .J Annex .M Annex .L Annex .B Annex .A The Default BitMa…
1.3.6.1.2.1.10.94.1.1.65543.1.22Columnhwadsl2TransMissionAnnexMScoperead-createcurrentAnnex M expand scope: 1-Tone Index(7~32) 2-Tone Index(7~36) 3-Tone Index(7~40) 4-Tone Index(7~44) 5-Tone Index(7~48) 6-Tone Index(7~52) 7-Tone Index(7~56) 8-To…
1.3.6.1.2.1.10.94.1.1.65543.1.23Columnhwadsl2L2ModeStateread-createcurrentThe state of L2 power management mode. Options: 1. disabled(1) - L2 power management mode is disabled 2. enabled(2) - L2 power management mode is enabled 3. fo…
1.3.6.1.2.1.10.94.1.1.65543.1.24Columnhwadsl2L2ModeMinDataRateread-createcurrentMinimum Data Rate in L2 Mode. Range: 128-16384 Unit: Kbps
1.3.6.1.2.1.10.94.1.1.65543.1.25Columnhwadsl2L2ModeMaxDataRateread-createcurrentMaximum Data Rate in L2 Mode. Range: 128-16384 Default: 1024 Unit: Kbps
1.3.6.1.2.1.10.94.1.1.65543.1.26Columnhwadsl2L2ModePayloadRateThresholdread-createcurrentThreshold for the Payload Rate Ratio. Range: 128-16384 Default: 128 Unit: Kbps
1.3.6.1.2.1.10.94.1.1.65543.1.27Columnhwadsl2L2ModeGuardTimeread-createcurrentGuard Time before entering L2 Mode. Range: 0-1024 Default: 60 Unit: seconds
1.3.6.1.2.1.10.94.1.1.65543.1.28Columnhwadsl2L2ModeIntervalTimeread-createcurrentThe minimum interval between two records of L2 mode. Range: 0-255 Default: 255 Unit: seconds
1.3.6.1.2.1.10.94.1.1.65543.1.29Columnhwadsl2L2ModeIntervalPowerValueread-createcurrentMaximum aggregate transmit power reduction per L2 request or L2 power trim. Range: 0-31 Default: 3 Unit: db
1.3.6.1.2.1.10.94.1.1.65543.1.30Columnhwadsl2L2ModeTotalPowerValueread-createcurrentTotal maximum aggregate transmit power reduction in L2. Range: 0-31 Default: 9 Unit: db
1.3.6.1.2.1.10.94.1.1.65543.1.31ColumnhwadslExtUsPhyRcontrolread-writecurrentTo enable or disable the PHY-R function on upstream direction. Options: 1. enable(1) - The PHY-R function on upstream direction is enabled 2. disable(2) - The …
1.3.6.1.2.1.10.94.1.1.65543.1.32ColumnhwadslExtUsINPmaxread-writecurrentMaximum Impulse Noise Protection on upstream direction. The parameter can take the following values: noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbol…
1.3.6.1.2.1.10.94.1.1.65543.1.33ColumnhwadslExtUsMinRtxRatioread-writecurrentMinimum rtxratio on upstream direction. Range: 0-255 Default: 0 Unit: 1/256
1.3.6.1.2.1.10.94.1.1.65543.1.34ColumnhwadslExtUsMinRSoverheadread-writecurrentThe minimum value of R/N on upstream direction. Range: 0-128 Default: 0 Unit: 1/256
1.3.6.1.2.1.10.94.1.1.65543.1.35ColumnhwadslExtDsPhyRcontrolread-writecurrentTo enable or disable the PHY-R function on downstream direction. Options: 1. enable(1) - The PHY-R function on downstream direction is enabled 2. disable(2) - …
1.3.6.1.2.1.10.94.1.1.65543.1.36ColumnhwadslExtDsINPmaxread-writecurrentMaximum Impulse Noise Protection on downstream direction. The parameter can take the following values: noProtection(1), halfSymbol(2), singleSymbol(3), twoSymb…
1.3.6.1.2.1.10.94.1.1.65543.1.37ColumnhwadslExtDsMinRtxRatioread-writecurrentMinimum rtxratio on downstream direction. Range: 0-255 Default: 0 Unit: 1/256
1.3.6.1.2.1.10.94.1.1.65543.1.38ColumnhwadslExtDsMinRSoverheadread-writecurrentThe minimum value of R/N on downstream direction. Range: 0-128 Default: 0 Unit: 1/256
1.3.6.1.2.1.10.94.1.1.65543.1.39Columnhwadsl2TSSiPsdMaskUsread-writecurrentThe upstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G992.3 or G992.5 and it may impose PSD restrictions (breakpoints)…
1.3.6.1.2.1.10.94.1.1.65543.1.40ColumnhwadslLConfProfAdslModeread-writecurrentThe ADSL2 management model specified includes an ADSL Mode attribute which identifies an instance of ADSL Mode-Specific PSD Configuration object in the ADSL Li…
1.3.6.1.2.1.10.94.1.1.65543.1.65535ColumnhwadslLineExtConfProfileRowStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active…
1.3.6.1.2.1.10.94.1.1.65543.1.65536Columnhwadsl2L2ModeL2Timeread-createcurrentThis minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 St…
1.3.6.1.2.1.10.94.1.1.65544TablehwAdslLineLatestActParaTablenot-accessiblecurrentThis table provides one row for each ADSL PORT. Each row contains the latest actived Parameters. The index of this table is ifIndex.
1.3.6.1.2.1.10.94.1.1.65544.1RowhwAdslLineLatestActParaEntrynot-accessiblecurrentThis table provides one row for each ADSL PORT. Each row contains the latest actived Parameters. The index of this entry is ifIndex.
1.3.6.1.2.1.10.94.1.1.65544.1.1ColumnhwAdslLineLatestActiveTimeread-onlycurrentActual time when latest actived.
1.3.6.1.2.1.10.94.1.1.65544.1.2ColumnhwAdslLineLatestDeactiveTimeread-onlycurrentActual time when latest deactived. If port is actived, the value is invalid.
1.3.6.1.2.1.10.94.1.1.65544.1.3ColumnhwAdslAtucLatestTxRateread-onlycurrentActual transmit rate on this channel when latest actived. Unit: bps
1.3.6.1.2.1.10.94.1.1.65544.1.4ColumnhwAdslAturLatestTxRateread-onlycurrentActual transmit rate on this channel when latest actived. Unit: bps
1.3.6.1.2.1.10.94.1.1.65544.1.5ColumnhwAdslAtucLatestSnrMgnread-onlycurrentNoise Margin as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. in tenth dB. Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65544.1.6ColumnhwAdslAturLatestSnrMgnread-onlycurrentNoise Margin as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. in tenth dB. Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65544.1.7ColumnhwAdslAtucLatestAtnread-onlycurrentMeasured difference in the total power transmitted as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. in tenth dB. Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65544.1.8ColumnhwAdslAturLatestAtnread-onlycurrentMeasured difference in the total power transmitted as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. in tenth dB. Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65544.1.9ColumnhwAdslAtucLatestAttainableRateread-onlycurrentIndicates the maximum attainable data rate by the ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: bps
1.3.6.1.2.1.10.94.1.1.65544.1.10ColumnhwAdslAturLatestAttainableRateread-onlycurrentIndicates the maximum attainable data rate by the ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: bps
1.3.6.1.2.1.10.94.1.1.65544.1.11ColumnhwAdslAtucLatestConfTxRateread-onlycurrentConfigured transmit rate for ADSL port, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rate…
1.3.6.1.2.1.10.94.1.1.65544.1.12ColumnhwAdslAturLatestConfTxRateread-onlycurrentConfigured receive rate for ADSL port, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates…
1.3.6.1.2.1.10.94.1.1.65544.1.13ColumnhwAdslAtucLatestInterleaveDelayread-onlycurrentInterleave Delay for this channel when latest actived. Unit: milliseconds
1.3.6.1.2.1.10.94.1.1.65544.1.14ColumnhwAdslAturLatestInterleaveDelayread-onlycurrentInterleave Delay for this channel when latest actived. Unit: milliseconds
1.3.6.1.2.1.10.94.1.1.65544.1.15ColumnhwAdslAtucLatestTargetSnrMgnread-onlycurrentPort Signal/Noise Margin. Range: 0-310 Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65544.1.16ColumnhwAdslAturLatestTargetSnrMgnread-onlycurrentPort Signal/Noise Margin. Range: 0-310 Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65544.1.17ColumnhwAdslAtucLatestTxRateThresholdread-onlycurrentPort down stream threshold. Unit: bps
1.3.6.1.2.1.10.94.1.1.65544.1.18ColumnhwAdslAturLatestTxRateThresholdread-onlycurrentPort up stream threshold. Unit: bps
1.3.6.1.2.1.10.94.1.1.65545TablehwXdslPortPerformanceStatTablenot-accessiblecurrentXDSL port performance statistic table. The indexes of this table are ifIndex and hwXdslPort15minutesPerformanceInterval.
1.3.6.1.2.1.10.94.1.1.65545.1RowhwXdslPortPerformanceStatEntrynot-accessiblecurrentXDSL port performance statistic table. The indexes of this entry are ifIndex and hwXdslPort15minutesPerformanceInterval.
1.3.6.1.2.1.10.94.1.1.65545.1.1ColumnhwXdslPort15minutesPerformanceIntervalnot-accessiblecurrentThe index of the interval which is queried. Range: 0-96
1.3.6.1.2.1.10.94.1.1.65545.1.2ColumnhwXdslPort15minutesPerformanceInBytesread-onlycurrentRead the receive bytes of xDSL port during 15 minutes.
1.3.6.1.2.1.10.94.1.1.65545.1.3ColumnhwXdslPort15minutesPerformanceOutBytesread-onlycurrentRead the transmit bytes of xDSL port during 15 minutes.
1.3.6.1.2.1.10.94.1.1.65545.1.4ColumnhwXdslPortSyncSuccNumberread-onlycurrentNumber of successful activations of the xDSL port within 15 minutes.
1.3.6.1.2.1.10.94.1.1.65545.1.5ColumnhwXdslPortSyncFailNumberread-onlycurrentNumber of failed activations of the xDSL port within 15 minutes.
1.3.6.1.2.1.10.94.1.1.65545.1.6ColumnhwXdslPortAtucCodeViolationread-onlycurrentNumber of head errors of the ATUC cell within 15 minutes.
1.3.6.1.2.1.10.94.1.1.65545.1.7ColumnhwXdslPortAturCodeViolationread-onlycurrentNumber of head errors of the ATUR cell within 15 minutes.
1.3.6.1.2.1.10.94.1.1.65545.1.8ColumnhwXdslPortAtucFecSecondsread-onlycurrentSeconds of the ATUC FEC errors within 15 minutes.
1.3.6.1.2.1.10.94.1.1.65545.1.9ColumnhwXdslPortAturFecSecondsread-onlycurrentSeconds of the ATUR FEC errors within 15 minutes.
1.3.6.1.2.1.10.94.1.1.65545.1.10ColumnhwXdslPortCurrent15minutesStatTimeread-onlycurrentSeconds passed within the current 15 minutes.
1.3.6.1.2.1.10.94.1.1.65546TablehwAdslPortPerformanceStatTablenot-accessiblecurrentThis table is used to describe the performance statistics of the ADSL port within 15 minutes. The indexes of this table are ifIndex and hwAdslPort15minutesPerf…
1.3.6.1.2.1.10.94.1.1.65546.1RowhwAdslPortPerformanceStatEntrynot-accessiblecurrentThis table is used to describe the performance statistics of the ADSL port within 15 minutes. The indexes of this entry are ifIndex and hwAdslPort15minutesPerf…
1.3.6.1.2.1.10.94.1.1.65546.1.1ColumnhwAdslPort15minutesPerformanceIntervalnot-accessiblecurrentThe index of the interval which is queried. Range: 0-96
1.3.6.1.2.1.10.94.1.1.65546.1.2ColumnhwAdslPort15minutesPerformanceInBytesread-onlycurrentRead the receive bytes of xDSL port during 15 minutes.
1.3.6.1.2.1.10.94.1.1.65546.1.3ColumnhwAdslPort15minutesPerformanceOutBytesread-onlycurrentRead the transmit bytes of xDSL port during 15 minutes.
1.3.6.1.2.1.10.94.1.1.65546.1.4ColumnhwAdslPortSyncSuccNumberread-onlycurrentNumber of successful activations within 15 minutes.
1.3.6.1.2.1.10.94.1.1.65546.1.5ColumnhwAdslPortSyncFailNumberread-onlycurrentNumber of failed activations within 15 minutes.
1.3.6.1.2.1.10.94.1.1.65546.1.6ColumnhwAdslPortAtucCodeViolationread-onlycurrentSeconds of head errors of the ATUC cell within 15 minutes.
1.3.6.1.2.1.10.94.1.1.65546.1.7ColumnhwAdslPortAturCodeViolationread-onlycurrentSeconds of head errors of the ATUC cell within 15 minutes.
1.3.6.1.2.1.10.94.1.1.65546.1.8ColumnhwAdslPortAtucFecSecondsread-onlycurrentSeconds of the ATUC FEC errors within 15 minutes.
1.3.6.1.2.1.10.94.1.1.65546.1.9ColumnhwAdslPortAturFecSecondsread-onlycurrentError seconds of the ATUR FEC within 15 minutes.
1.3.6.1.2.1.10.94.1.1.65546.1.10ColumnhwAdslPortCurrent15minutesTimeElapseread-onlycurrentSeconds that is passed within the current 15 minutes.
1.3.6.1.2.1.10.94.1.1.65546.1.11ColumnhwAdslPortAtucHecDropCellsCntread-onlycurrentATUC cells discarded with HEC Errors.
1.3.6.1.2.1.10.94.1.1.65546.1.12ColumnhwAdslPortAturHecDropCellsCntread-onlycurrentATUR cells discarded with HEC Errors.
1.3.6.1.2.1.10.94.1.1.65546.1.13ColumnhwAdslLineConfProfileread-onlycurrentThe value of this object identifies the row in the ADSL Line Configuration Profile Table, (adslLineConfProfileTable), which applies for this ADSL line, and cha…
1.3.6.1.2.1.10.94.1.1.65546.1.14ColumnhwAdslPort15minUpTimeread-onlycurrentUp time in the interval. Unit: seconds
1.3.6.1.2.1.10.94.1.1.65546.1.15ColumnhwAdslAtucCurrAtnread-onlycurrentMeasured difference in the total power transmitted by the peer ATU and the total power received by this ATU. Range: 0-630 Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65546.1.16ColumnhwAdslAtucCurrSnrMgnread-onlycurrentNoise Margin as seen by this ATU with respect to its received signal in tenth dB. Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65546.1.17ColumnhwAdslAtucCurrAttainableRateread-onlycurrentIndicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. Unit: bps
1.3.6.1.2.1.10.94.1.1.65546.1.18ColumnhwAdslAtucChanCurrTxRateread-onlycurrentActual transmit rate on this channel. Unit: bps
1.3.6.1.2.1.10.94.1.1.65546.1.19ColumnhwAdslAturCurrAtnread-onlycurrentMeasured difference in the total power transmitted by the peer ATU and the total power received by this ATU. Range: 0-630 Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65546.1.20ColumnhwAdslAturCurrSnrMgnread-onlycurrentNoise Margin as seen by this ATU with respect to its received signal in tenth dB. Unit: tenth dB
1.3.6.1.2.1.10.94.1.1.65546.1.21ColumnhwAdslAturCurrAttainableRateread-onlycurrentIndicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. Unit: bps
1.3.6.1.2.1.10.94.1.1.65546.1.22ColumnhwAdslAturChanCurrTxRateread-onlycurrentActual transmit rate on this channel. Unit: bps
1.3.6.1.2.1.10.94.1.1.65546.1.23ColumnhwAdslAtucIntervalESsread-onlycurrentCount of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more …
1.3.6.1.2.1.10.94.1.1.65546.1.24ColumnhwAdslAtucIntervalLofsread-onlycurrentCount of seconds in the interval when there was Loss of Framing. Unit: seconds
1.3.6.1.2.1.10.94.1.1.65546.1.25ColumnhwAdslAtucIntervalLolsread-onlycurrentCount of seconds in the interval when there was Loss of Link. Unit: seconds
1.3.6.1.2.1.10.94.1.1.65546.1.26ColumnhwAdslAtucIntervalLossread-onlycurrentCount of seconds in the interval when there was Loss of Signal. Unit: seconds
1.3.6.1.2.1.10.94.1.1.65546.1.27ColumnhwAdslAtucIntervalLprsread-onlycurrentCount of seconds in the interval when there was Loss of Power. Unit: seconds
1.3.6.1.2.1.10.94.1.1.65546.1.28ColumnhwAdslAturIntervalESsread-onlycurrentCount of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more …
1.3.6.1.2.1.10.94.1.1.65546.1.29ColumnhwAdslAturIntervalLofsread-onlycurrentCount of seconds in the interval when there was Loss of Framing. Unit: seconds
1.3.6.1.2.1.10.94.1.1.65546.1.30ColumnhwAdslAturIntervalLossread-onlycurrentCount of seconds in the interval when there was Loss of Signal. Unit: seconds
1.3.6.1.2.1.10.94.1.1.65546.1.31ColumnhwAdslAturIntervalLprsread-onlycurrentCount of seconds in the interval when there was Loss of Power. Unit: seconds
1.3.6.1.2.1.10.94.1.1.65546.1.32ColumnhwAdslAtucChanIntervalReceivedBlksread-onlycurrentCount of all encoded blocks received on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.65546.1.33ColumnhwAdslAtucChanIntervalTransmittedBlksread-onlycurrentCount of all encoded blocks transmitted on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.65546.1.34ColumnhwAdslAtucChanIntervalCorrectedBlksread-onlycurrentCount of all blocks received with errors that were corrected on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.65546.1.35ColumnhwAdslAtucChanIntervalUncorrectBlksread-onlycurrentCount of all blocks received with uncorrectable errors on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.65546.1.36ColumnhwAdslAturChanIntervalReceivedBlksread-onlycurrentCount of all encoded blocks received on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.65546.1.37ColumnhwAdslAturChanIntervalTransmittedBlksread-onlycurrentCount of all encoded blocks transmitted on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.65546.1.38ColumnhwAdslAturChanIntervalCorrectedBlksread-onlycurrentCount of all blocks received with errors that were corrected on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.65546.1.39ColumnhwAdslAturChanIntervalUncorrectBlksread-onlycurrentCount of all blocks received with uncorrectable errors on this channel during this interval.
1.3.6.1.2.1.10.94.1.1.65546.1.40ColumnhwAdslAtucIntervalSesLread-onlycurrentFor the each interval, adslAtucIntervalSesL reports the number of seconds during which there have been severely errored seconds-line. Unit: seconds
1.3.6.1.2.1.10.94.1.1.65546.1.41ColumnhwAdslAtucIntervalUasLread-onlycurrentFor the each interval, adslAtucIntervalUasL reports the number of seconds during which there have been unavailable seconds-line. Unit: seconds
1.3.6.1.2.1.10.94.1.1.65546.1.42ColumnhwAdslAturIntervalSesLread-onlycurrentFor the each interval, adslAturIntervalSesL reports the number of seconds during which there have been severely errored seconds-line. Unit: seconds
1.3.6.1.2.1.10.94.1.1.65546.1.43ColumnhwAdslAturIntervalUasLread-onlycurrentFor the each interval, adslAturIntervalUasL reports the number of seconds during which there have been unavailable seconds-line. Unit: seconds
1.3.6.1.2.1.10.94.1.1.65546.1.44ColumnhwAdslPortCurrentActModeread-onlycurrentInstantaneous value of the technology type that line is currently trained up under. Options: 1. adsl(1) - Indicates that line is currently trained up under ads…
1.3.6.1.2.1.10.94.1.1.65547TablehwAdslPortRateChangeTrapParaTablenot-accessiblecurrentADSL line rate change trap parameter table. The index of this table is ifIndex.
1.3.6.1.2.1.10.94.1.1.65547.1RowhwAdslPortRateChangeTrapParaEntrynot-accessiblecurrentADSL line rate change trap parameter table. The index of this entry is ifIndex.
1.3.6.1.2.1.10.94.1.1.65547.1.1ColumnhwAdslPortRateChangeTrapIPIAIDaccessible-for-notifycurrentThe port IPIAID is reported when the port rate changes.
1.3.6.1.2.1.10.94.1.1.65547.1.2ColumnhwAdslPortRateChangeTrapMUXIDaccessible-for-notifycurrentThe port MUXID is reported when the port rate changes.
1.3.6.1.2.1.10.94.1.1.65547.1.3ColumnhwAdslPortRateChangeTrapTimeStampaccessible-for-notifycurrentThe time stamp of Line rate change trap. Standard Unix format; as the number of seconds since 1/1/1970 (UNIT:Second).
1.3.6.1.2.1.10.94.1.1.65547.1.4ColumnhwAdslPortRateChangeTrapDSLineRateaccessible-for-notifycurrentDown stream line rate after line rate change.
1.3.6.1.2.1.10.94.1.1.65547.1.5ColumnhwAdslPortRateChangeTrapUSLineRateaccessible-for-notifycurrentUp stream line rate after line rate change.
1.3.6.1.2.1.10.94.1.1.65547.1.6ColumnhwAdslPortRateChangeTrapEventTypeaccessible-for-notifycurrentEvent type reported during the previous change of the rate. If both the upstream and downstream rates change, this leaf object outputs character string 'DU'. I…
1.3.6.1.2.1.10.94.1.1.65547.1.7ColumnhwAdslPortRateChangeTrapDslTypeaccessible-for-notifycurrentDSL line type of the port whose rate changes.
1.3.6.1.2.1.10.94.1.1.65548NodehwXdslSysManagementParaTable
1.3.6.1.2.1.10.94.1.1.65548.1ScalarhwAdslPortRateChangeTrapConfigread-writecurrentEnable or disable ADSL port line-rate change trap feature. Options: 1. enabled(1) - ADSL port line-rate change trap feature is enabled 2. disabled(2) - ADSL po…
1.3.6.1.2.1.10.94.1.1.65549TablehwAdsl2SCStateTablenot-accessiblecurrentThe table adsl2SCStatusTable contains status parameters of the ADSL2 sub-carriers. The indexes of this table are ifIndex and hwAdsl2SCStatusDirection.
1.3.6.1.2.1.10.94.1.1.65549.1RowhwAdsl2SCStateEntrynot-accessiblecurrentThe table adsl2SCStatusTable contains status parameters of the ADSL2 sub-carriers. The indexes of this entry are ifIndex and hwAdsl2SCStatusDirection.
1.3.6.1.2.1.10.94.1.1.65549.1.1ColumnhwAdsl2SCStatusDirectionnot-accessiblecurrentThe direction of the sub-carrier is either upstream or downstream. Options: 1. upstream(1) - Upstream sub-carrier 2. downstream(2) - Downstream sub-carrier
1.3.6.1.2.1.10.94.1.1.65549.1.2ColumnhwAdsl2SCStatusSnrread-onlycurrentThe SNR Margin per sub-carrier, expressing the ratio between the received signal power and received noise power per subscriber. It is an array of 512 octets, d…
1.3.6.1.2.1.10.94.1.1.65549.1.3ColumnhwAdsl2SCStatusBitsAllocread-onlycurrentThe bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. The number of utilized …
1.3.6.1.2.1.10.94.1.1.65549.1.4ColumnhwAdsl2SCStatusGainAllocread-onlycurrentThe gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. The number of utilized octet…
1.3.6.1.2.1.10.94.1.1.65549.1.5ColumnhwAdsl2SCStatusLogread-onlycurrentAn array of up to 512 real H(f) logarithmic representation values in dB for the respective transmission direction. It is designed to support up to 512 (downstr…
1.3.6.1.2.1.10.94.1.1.65549.1.6ColumnhwAdsl2SCStatusQlnread-onlycurrentAn array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to 512 (downstream) sub-carriers.…
1.3.6.1.2.1.10.94.1.1.65549.1.7ColumnhwAdsl2SCStatusSnrMarginread-onlycurrentSNR Margin is the maximum increase in dB of the noise power received at the ATU (ATU-R on downstream direction and ATU-C on upstream direction), such that the …
1.3.6.1.2.1.10.94.1.1.65549.1.8ColumnhwAdsl2SCStatusTxPSDread-onlycurrentThe PSD MASK per sub-carrier.An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub-carriers. It ranges from -1400 to -300 units of…
1.3.6.1.2.1.10.94.1.1.65550TablehwxdslDynamicProfTablenot-accessiblecurrentThis table includes common parameters of the xdsl Dynamic profile. The index of this table is hwxdslDynamicProfProfileName.
1.3.6.1.2.1.10.94.1.1.65550.1RowhwxdslDynamicProfEntrynot-accessiblecurrentThis table includes common parameters of the xdsl Dynamic profile. The index of this entry is hwxdslDynamicProfProfileName.
1.3.6.1.2.1.10.94.1.1.65550.1.1ColumnhwxdslDynamicProfProfileNamenot-accessiblecurrentThe name of xdsl Dynamic Profile.
1.3.6.1.2.1.10.94.1.1.65550.1.2ColumnhwxdslDynamicProfXtuTransSysEnaread-createcurrentXtu Transmission System Enabling (ATSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more b…
1.3.6.1.2.1.10.94.1.1.65550.1.3ColumnhwxdslDynamicProfBitSwapDSread-createcurrentEnables or disables the bit swap downstream of a line. Options: 1. disable(1) - The bit swap downstream of a line is disabled 2. enable(2) - The bit swap downs…
1.3.6.1.2.1.10.94.1.1.65550.1.4ColumnhwxdslDynamicProfBitSwapUSread-createcurrentEnables or disables the bit swap upstream of a line. Options: 1. disable(1) - The bit swap upstream of a line is disabled 2. enable(2) - The bit swap upstream …
1.3.6.1.2.1.10.94.1.1.65550.1.5ColumnhwxdslDynamicProfTargetSnrmDsread-createcurrentThe target Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete …
1.3.6.1.2.1.10.94.1.1.65550.1.6ColumnhwxdslDynamicProfTargetSnrmUsread-createcurrentThe target Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete …
1.3.6.1.2.1.10.94.1.1.65550.1.7ColumnhwxdslDynamicProfMaxSnrmDsread-createcurrentThe maximum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete…
1.3.6.1.2.1.10.94.1.1.65550.1.8ColumnhwxdslDynamicProfMaxSnrmUsread-createcurrentThe maximum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete…
1.3.6.1.2.1.10.94.1.1.65550.1.9ColumnhwxdslDynamicProfMinSnrmDsread-createcurrentThe minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete…
1.3.6.1.2.1.10.94.1.1.65550.1.10ColumnhwxdslDynamicProfMinSnrmUsread-createcurrentThe minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete…
1.3.6.1.2.1.10.94.1.1.65550.1.11ColumnhwxdslDynamicProfCh1MinProtectionDsread-createcurrentMinimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can …
1.3.6.1.2.1.10.94.1.1.65550.1.12ColumnhwxdslDynamicProfCh1MinProtectionUsread-createcurrentMinimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can ta…
1.3.6.1.2.1.10.94.1.1.65550.1.13ColumnhwxdslDynamicProfCh1MaxDelayDsread-createcurrentMaximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The XTUs shall choos…
1.3.6.1.2.1.10.94.1.1.65550.1.14ColumnhwxdslDynamicProfCh1MaxDelayUsread-createcurrentMaximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choose th…
1.3.6.1.2.1.10.94.1.1.65550.1.15ColumnhwxdslDynamicProfCh2MinProtectionDsread-createcurrentMinimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can …
1.3.6.1.2.1.10.94.1.1.65550.1.16ColumnhwxdslDynamicProfCh2MinProtectionUsread-createcurrentMinimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can ta…
1.3.6.1.2.1.10.94.1.1.65550.1.17ColumnhwxdslDynamicProfCh2MaxDelayDsread-createcurrentMaximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The XTUs shall choos…
1.3.6.1.2.1.10.94.1.1.65550.1.18ColumnhwxdslDynamicProfCh2MaxDelayUsread-createcurrentMaximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choose th…
1.3.6.1.2.1.10.94.1.1.65550.1.19ColumnhwxdslDynamicProfPmModeread-createcurrentPower management state Enabling. Defines the power states the xTU-C or xTU-R may autonomously transition to on this line. The various bit positions are: allowT…
1.3.6.1.2.1.10.94.1.1.65550.1.20ColumnhwxdslDynamicProfL0Timeread-createcurrentThis minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state. It ranges from 0 to 255 seconds. The invalid value is 65…
1.3.6.1.2.1.10.94.1.1.65550.1.21ColumnhwxdslDynamicProfL2Timeread-createcurrentThis minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 St…
1.3.6.1.2.1.10.94.1.1.65550.1.22ColumnhwxdslDynamicProfL2Atprread-createcurrentThe maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single Power Trim in the L2 state. It…
1.3.6.1.2.1.10.94.1.1.65550.1.23ColumnhwxdslDynamicProfL2Atprtread-createcurrentThe total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at tr…
1.3.6.1.2.1.10.94.1.1.65550.1.24ColumnhwxdslDynamicProfDpboEPsdread-createcurrentThis parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds. The maximum number …
1.3.6.1.2.1.10.94.1.1.65550.1.25ColumnhwxdslDynamicProfDpboEsELread-createcurrentThis configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi…
1.3.6.1.2.1.10.94.1.1.65550.1.26ColumnhwxdslDynamicProfDpboEscmread-createcurrentThis configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de…
1.3.6.1.2.1.10.94.1.1.65550.1.27ColumnhwxdslDynamicProfDpboMusread-createcurrentDPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shal…
1.3.6.1.2.1.10.94.1.1.65550.1.28ColumnhwxdslDynamicProfDpboFMinread-createcurrentDPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multip…
1.3.6.1.2.1.10.94.1.1.65550.1.29ColumnhwxdslDynamicProfDpboFMaxread-createcurrentDPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.…
1.3.6.1.2.1.10.94.1.1.65550.1.30ColumnhwxdslDynamicProfUpboPsdBandread-createcurrentThis parameter defines the UPBO reference PSD used to compute the upstream power back-off for each upstream band except US0. A UPBOPSD defined for each band ah…
1.3.6.1.2.1.10.94.1.1.65550.1.31ColumnhwxdslDynamicProfUpboKLFread-createcurrentThis parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB (UPBOKL) to compute the UPBO. The value shall be forced if the f…
1.3.6.1.2.1.10.94.1.1.65550.1.32ColumnhwxdslDynamicProfUpboKLread-createcurrentThis parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value shall be coded as an unsigned 16 bit number…
1.3.6.1.2.1.10.94.1.1.65550.1.33ColumnhwxdslDynamicProfRfiBandsread-createcurrentThe subset of PSD mask breakpoints that shall be used to notch an RFI band. It is a string of bands consist of begin tone index and end tone index. for example…
1.3.6.1.2.1.10.94.1.1.65550.1.34ColumnhwxdslDynamicProfToneBlackOutread-createcurrentThe subset of subcarriermask that shall be used to mask the subcarriers. It is a string of bands consist of begin tone index and end tone index. for example :0…
1.3.6.1.2.1.10.94.1.1.65550.1.35ColumnhwxdslDynamicProfCarMaskDSread-createcurrentSub-carriers mask. A bitmap of 512 bits that allows masking up to 512 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1…
1.3.6.1.2.1.10.94.1.1.65550.1.36ColumnhwxdslDynamicProfCarMaskUSread-createcurrentSub-carriers mask. A bitmap of 64 bits that allows masking up to 64 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1',…
1.3.6.1.2.1.10.94.1.1.65550.1.37ColumnhwxdslDynamicProfXdslModeread-createcurrentThe XDSL Mode is a way of categorizing the various XDSL transmission modes into groups, each group (XDSL Mode) shares the same PSD configuration. Options: 1. d…
1.3.6.1.2.1.10.94.1.1.65550.1.38ColumnhwxdslDynamicProfMaxNomPsdDsread-createcurrentThe maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz(physical value…
1.3.6.1.2.1.10.94.1.1.65550.1.39ColumnhwxdslDynamicProfMaxNomPsdUsread-createcurrentThe maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz(physical values …
1.3.6.1.2.1.10.94.1.1.65550.1.40ColumnhwxdslDynamicProfMaxNomAtpDsread-createcurrentThe maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical…
1.3.6.1.2.1.10.94.1.1.65550.1.41ColumnhwxdslDynamicProfMaxNomAtpUsread-createcurrentThe maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical v…
1.3.6.1.2.1.10.94.1.1.65550.1.42ColumnhwxdslDynamicProfPsdMaskDsread-createcurrentThis configuration parameter defines the downstream PSD mask applicable at the U C2 reference point. This MIB PSD mask may impose PSD restrictions in addition …
1.3.6.1.2.1.10.94.1.1.65550.1.43ColumnhwxdslDynamicProfPsdMaskUsread-createcurrentThis configuration parameter defines the upstream PSD mask applicable at the U R2 reference point. This MIB PSD mask may impose PSD restrictions in addition to…
1.3.6.1.2.1.10.94.1.1.65550.1.44ColumnhwxdslDynamicProfLimitMaskread-createcurrentThis configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. Options: 1. profile8a (1) - The G.993.2 profile is p…
1.3.6.1.2.1.10.94.1.1.65550.1.45ColumnhwxdslDynamicProfClassMaskread-createcurrentIn order to reduce the number of configuration possibilities, the limit PSD masks are grouped in the following PSD mask classes: Options: 1. annexA998D32(1) - …
1.3.6.1.2.1.10.94.1.1.65550.1.46ColumnhwxdslDynamicProfBandOptUsageread-createcurrentDefines the VDSL link use of the optional frequency range [25kHz - 138kHz] (Opt). Options: 1. disable(1) - Indicates Opt is unused 2. enable(2) - Indicates Opt…
1.3.6.1.2.1.10.94.1.1.65550.1.47ColumnhwxdslDynamicProfVirtualNoiseModeDsread-createcurrentDefines the Virtual Noise of downsteam. Options: 1. disable(1) - Unused 2. enable(2) - Used 3. invalidValue(-1) - Invalid value
1.3.6.1.2.1.10.94.1.1.65550.1.48ColumnhwxdslDynamicProfVirtualNoiseModeUsread-createcurrentDefines the Virtual Noise of upstream. Options: 1. disable(1) - Unused 2. enable(2) - Used 3. invalidValue(-1) - Invalid value
1.3.6.1.2.1.10.94.1.1.65550.1.49ColumnhwxdslDynamicProfVirtualNoiseDsread-createcurrentThe Virtual Noise of downsteam. This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of…
1.3.6.1.2.1.10.94.1.1.65550.1.50ColumnhwxdslDynamicProfVirtualNoiseUsread-createcurrentThe Virtual Noise of upsteam. This is a string of 16 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a…
1.3.6.1.2.1.10.94.1.1.65550.1.51ColumnhwxdslDynamicProfRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '…
1.3.6.1.2.1.10.94.1.1.65551TablehwXdslPortIopCaptureTablenot-accessiblecurrentThe table hwXdslPortIopCaptureTable implement xDSL port IOP information capture. The index of this table is ifIndex.
1.3.6.1.2.1.10.94.1.1.65551.1RowhwXdslPortIopCaptureEntrynot-accessiblecurrentThe table hwXdslPortIopCaptureTable implement xDSL port IOP information capture. The index of this entry is ifIndex.
1.3.6.1.2.1.10.94.1.1.65551.1.1ColumnhwXdslPortIopCaptureOperTyperead-writecurrentStart or stop IOP information capture of xDSL port. Options: 1. start(1) - Start IOP information capture of xDSL port 2. stop(2) - Stop IOP information capture…
1.3.6.1.2.1.10.94.1.1.65551.1.2ColumnhwXdslPortIopCaptureOperStatusread-onlycurrentPort IOP capture status. Options: 1. noCapture(1) - Indicates that the capture is not performed 2. capturing(2) - Indicates that the capture is being performed…
1.3.6.1.2.1.10.94.1.1.65552TablehwXdslDynamicInfoCollectTablenot-accessibledeprecatedThe table hwXdslDynamicInfoCollectTable implement xDSL port Dynamic information collect. The index of this table is hwFrameIndex and hwSlotIndex.
1.3.6.1.2.1.10.94.1.1.65552.1RowhwXdslDynamicInfoCollectEntrynot-accessibledeprecatedThe table hwXdslDynamicInfoCollectTable implement xDSL port Dynamic information collect. The index of this entry is hwFrameIndex and hwSlotIndex.
1.3.6.1.2.1.10.94.1.1.65552.1.1ColumnhwXdslDynamicInfoCollectread-writedeprecatedStart Dynamic information collecting of Xdsl port. Options: 1. start(1) - Indicates that collecting data starts 2. invalid(-1) - Invalid value
1.3.6.1.2.1.10.94.1.1.65552.1.2ColumnhwXdslDynamicInfoCollectStatusread-onlydeprecatedBoard Dynamic information collecting status. Options: 1. noCollect(1) - Indicates that collecting data is not performed 2. collecting(2) - Indicates that colle…
1.3.6.1.2.1.10.94.1.1.65552.1.3ColumnhwXdslDynamicInfoCollectTimeread-onlydeprecatedTime when collecting the optimization information is complete.
1.3.6.1.2.1.10.94.1.2.65536NodehwAdslTraps
1.3.6.1.2.1.10.94.1.2.65536.1NodehwAdslGeneralTraps
1.3.6.1.2.1.10.94.1.2.65536.1.0NodehwAdslGeneralTrapsOIDs
1.3.6.1.2.1.10.94.1.2.65536.1.0.1NotificationhwAdslPortActRateMonitorTrapcurrentDefinition of the trap reported when the ADSL port rate fails to meet the requirement. If ADSL act rate is lower than threshold, hwTrapType is 1. Otherwise, hw…
1.3.6.1.2.1.10.94.1.2.65536.1.0.2NotificationhwAdslPortRateChangeTrapcurrentADSL act rate is change trap. This trap message is generated when the ADSL port rate change.
1.3.6.1.2.1.10.94.3.1.17.1.65555Scalarhwadsl2LineTransAtucActualread-onlycurrentThe actual transmission mode of the ATU-C. During ADSL line initialization, the ADSL Transceiver Unit - Remote terminal end (ATU-R) will determine the mode use…
1.3.6.1.4.1.2011.6.31IdentityhwAdslThis MIB is used for defining Huawei's ADSL management MIB objects.
Type Definitions
NameSyntaxStatusDescription
HWADSL2ANNEXMSCOPEINTEGER { toneIndex7to32(1), toneIndex7to36(2), toneIndex7to40(3), toneIndex7to44(4), toneIndex7to48(5), toneIndex7to52(6), toneIndex7to56(7), toneIndex7to60(8), toneIndex7to64(9), invalidValue(-1) }currentDefine HWADSL2ANNEXMSCOPE. Options: 1. toneIndex7to32(1) 2. toneIndex7to36(2) 3. toneIndex7to40(3) 4. toneIndex7to44(4) 5. toneIndex7to48(5) 6. toneIndex7to52(6) 7. toneIndex7to56(7) 8. toneIndex7to60(8) 9. toneIndex7to…
HWADSLSYMBOLPROTECTIONINTEGER { noProtection(0), halfSymbol(1), singleSymbol(2), twoSymbols(4), threeSymbols(6), fourSymbols(8), fiveSymbols(10), sixSymbols(12), sevenSymbols(14), eightSymbols(16), nineSymbols(18), tenSymbols(20), elevenSymbols(22), twelveSymbols(24), thirteenSymbols(26), fourteenSymbols(28), fifteenSymbols(30), sixteenSymbols(32), null(65535) }currentDefine HWADSLSYMBOLPROTECTION. Options: 1. noProtection(0) 2. halfSymbol(1) 3. singleSymbol(2) 4. twoSymbols(4) 5. threeSymbols(6) 6. fourSymbols(8) 7. fiveSymbols(10) 8. sixSymbols(12) 9. sevenSymbols(14) 10. eightSymb…
HWADSLTRANSMISSIONMODETYPEINTEGER { none(0), q9921gdmt(1), q9922glite(2), ansit1413(3), q9923adsl2a(4), q9925adsl2plus(5), q9923adsl2l(6) }currentDefine HWADSLTRANSMISSIONMODETYPE. Options: 1. none(0) - Unknown 2. q9921gdmt(1) - G992.1-Annex A 3. q9922glite(2) - G992.2-Annex A 4. ansit1413(3) - T1.413 5. q9923adsl2a(4) - G992.3-Annex A 6. q9925adsl2plus(5) - G992…
MIB Viewer