HUAWEI-XDSL-LINE-MIB
1552 objects
This mib is used for defining huawei's XDSL line management MIB objects.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.6.115 | IdentityhwXdslMIB | of | This mib is used for defining huawei's XDSL line management MIB objects. | |
| 1.3.6.1.4.1.2011.6.115.1 | NodehwXdsl | |||
| 1.3.6.1.4.1.2011.6.115.1.0 | NodehwXdslNotifications | |||
| 1.3.6.1.4.1.2011.6.115.1.0.1 | NotificationhwXdslLinePerfFECSThreshXtuc | current | This notification indicates that the FEC seconds threshold has been reached/exceeded for the referred xTU-C. | |
| 1.3.6.1.4.1.2011.6.115.1.0.2 | NotificationhwXdslLinePerfFECSThreshXtur | current | This notification indicates that the FEC seconds threshold has been reached/exceeded for the referred xTU-R. | |
| 1.3.6.1.4.1.2011.6.115.1.0.3 | NotificationhwXdslLinePerfESThreshXtuc | current | This notification indicates that the errored seconds threshold has been reached/exceeded for the referred xTU-C. | |
| 1.3.6.1.4.1.2011.6.115.1.0.4 | NotificationhwXdslLinePerfESThreshXtur | current | This notification indicates that the errored seconds threshold has been reached/exceeded for the referred xTU-R. | |
| 1.3.6.1.4.1.2011.6.115.1.0.5 | NotificationhwXdslLinePerfSESThreshXtuc | current | This notification indicates that the severely-errored seconds threshold has been reached/exceeded for the referred xTU-C. | |
| 1.3.6.1.4.1.2011.6.115.1.0.6 | NotificationhwXdslLinePerfSESThreshXtur | current | This notification indicates that the severely-errored seconds threshold has been reached/exceeded for the referred xTU-R. | |
| 1.3.6.1.4.1.2011.6.115.1.0.7 | NotificationhwXdslLinePerfLOSSThreshXtuc | current | This notification indicates that the LOS seconds threshold has been reached/exceeded for the referred xTU-C. | |
| 1.3.6.1.4.1.2011.6.115.1.0.8 | NotificationhwXdslLinePerfLOSSThreshXtur | current | This notification indicates that the LOS seconds threshold has been reached/exceeded for the referred xTU-R. | |
| 1.3.6.1.4.1.2011.6.115.1.0.9 | NotificationhwXdslLinePerfUASThreshXtuc | current | This notification indicates that the unavailable seconds threshold has been reached/exceeded for the referred xTU-C. | |
| 1.3.6.1.4.1.2011.6.115.1.0.10 | NotificationhwXdslLinePerfUASThreshXtur | current | This notification indicates that the unavailable seconds threshold has been reached/exceeded for the referred xTU-R. | |
| 1.3.6.1.4.1.2011.6.115.1.0.11 | NotificationhwXdslLinePerfCodingViolationsThreshXtuc | current | This notification indicates that the coding violations threshold has been reached/exceeded for the referred xTU-C. | |
| 1.3.6.1.4.1.2011.6.115.1.0.12 | NotificationhwXdslLinePerfCodingViolationsThreshXtur | current | This notification indicates that the coding violations threshold has been reached/exceeded for the referred xTU-R. | |
| 1.3.6.1.4.1.2011.6.115.1.0.13 | NotificationhwXdslLinePerfCorrectedThreshXtuc | current | This notification indicates that the corrected blocks (FEC events) threshold has been reached/exceeded for the referred xTU-C. | |
| 1.3.6.1.4.1.2011.6.115.1.0.14 | NotificationhwXdslLinePerfCorrectedThreshXtur | current | This notification indicates that the corrected blocks (FEC events) threshold has been reached/exceeded for the referred xTU-R. | |
| 1.3.6.1.4.1.2011.6.115.1.0.15 | NotificationhwXdslLinePerfFailedFullInitThresh | current | This notification indicates that the failed full initializations threshold has been reached/exceeded for the referred XDSL/XDSL2 or XDSL line. | |
| 1.3.6.1.4.1.2011.6.115.1.0.16 | NotificationhwXdslLinePerfFailedShortInitThresh | current | This notification indicates that the failed short initializations threshold has been reached/exceeded for the referred XDSL or XDSL line. | |
| 1.3.6.1.4.1.2011.6.115.1.0.17 | NotificationhwXdslLineStatusChangeXtuc | current | This notification indicates that a status change is detected for the referred xTU-C. | |
| 1.3.6.1.4.1.2011.6.115.1.0.18 | NotificationhwXdslLineStatusChangeXtur | current | This notification indicates that a status change is detected for the referred xTU-R. | |
| 1.3.6.1.4.1.2011.6.115.1.0.19 | NotificationhwXdslLinePerfFullInitThresh | current | This notification indicates that the full initializations threshold has been reached/exceeded for the referred XDSL/XDSL2 or XDSL line. | |
| 1.3.6.1.4.1.2011.6.115.1.1 | NodehwXdslLine | |||
| 1.3.6.1.4.1.2011.6.115.1.1.1 | TablehwXdslLineCfgTable | not-accessible | current | The table hwXdslLineCfgTable contains configuration, command and status parameters of the XDSL line. The index of this table is ifIndex. |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1 | RowhwXdslLineCfgEntry | not-accessible | current | The table hwXdslLineCfgTable contains configuration, command and status parameters of the XDSL line. The index of this entry is ifIndex. |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.1 | ColumnhwXdslLineCnfgTemplate | read-write | current | The value of this object identifies the row in the XDSL Line Configuration Templates Table, (hwXdslConfTemplatesTable), which applies for this XDSL line. |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.2 | ColumnhwXdslLineAlarmCnfgTemplate | read-write | current | The value of this object identifies the row in the XDSL Line Alarm Configuration Template Table, (hwXdslLineAlarmConfTemplateTable or hwXdslGfastLineAlarmConfT… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.3 | ColumnhwXdslLineCmndConfPmsf | read-write | current | Power management state forced. Defines the line states to be forced by the near-end xTU on this line. Options: 1. l3toL0(0) - Force the line to transition from… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.4 | ColumnhwXdslLineCmndConfLdsf | read-write | current | Loop diagnostics mode forced (LDSF). Defines whether the line should be forced into the loop diagnostics mode by the near-end xTU on this line or only be respo… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.5 | ColumnhwXdslLineCmndConfLdsfFailReason | read-only | current | The status of the recent occasion the Loop diagnostics mode forced (LDSF) was issued for the associated line. Options: 1. none(1) - The default value in case L… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.6 | ColumnhwXdslLineCmndAutomodeColdStart | read-write | current | Automode cold start forced. This parameter is defined in order to improve testing of the performance of ATUs supporting automode when it is enabled in the MIB.… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.7 | ColumnhwXdslLineStatusXtuTransSys | read-only | current | The xTU Transmission System (XTS) in use. This parameter may be derived from the handshaking procedures defined in Recommendation G.994.1. The invalid value is… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.8 | ColumnhwXdslLineStatusPwrMngState | read-only | current | The current power management state. Options: 1. L0 - Synchronized and full transmission 2. L1 - Low Power with reduced net data rate 3. L2 - Low Power with red… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.9 | ColumnhwXdslLineStatusInitResult | read-only | current | Indicates the result of the last full initialization performed on the line. Options: 1. noFail (0) - Successful initialization 2. configError (1) - Configurati… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.10 | ColumnhwXdslLineStatusLastStateDs | read-only | current | The last successful transmitted initialization state in the downstream direction in the last full initialization performed on the line. States are per the spec… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.11 | ColumnhwXdslLineStatusLastStateUs | read-only | current | The last successful transmitted initialization state in the upstream direction in the last full initialization performed on the line. States are per the specif… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.12 | ColumnhwXdslLineStatusXtur | read-only | current | Indicates current state (existing failures) of the xTU-R. This is a bit-map of possible conditions. The various bit positions are: noFailure(0), lossOfFraming(… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.13 | ColumnhwXdslLineStatusXtuc | read-only | current | Indicates current state (existing failures) of the xTU-C. This is a bit-map of possible conditions. This BITS structure can report the following failures: 1. n… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.14 | ColumnhwXdslLineStatusLnAttenDs | read-only | current | The measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub-carriers during diagnostics mode and… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.15 | ColumnhwXdslLineStatusLnAttenUs | read-only | current | The measured difference in the total power transmitted by the xTU-R and the total power received by the xTU-C over all sub- carriers during diagnostics mode an… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.16 | ColumnhwXdslLineStatusSigAttenDs | read-only | current | The measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub- carriers during Showtime. It ranges… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.17 | ColumnhwXdslLineStatusSigAttenUs | read-only | current | The measured difference in the total power transmitted by the xTU-R and the total power received by the xTU-C over all sub- carriers during Showtime. It ranges… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.18 | ColumnhwXdslLineStatusSnrMarginDs | read-only | current | Downstream SNR Margin is the maximum increase in dB of the noise power received at the xTU-R, such that the BER requirements are met for all downstream bearer … |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.19 | ColumnhwXdslLineStatusSnrMarginUs | read-only | current | Upstream SNR Margin is the maximum increase in dB of the noise power received at the xTU-C, such that the BER requirements are met for all downstream bearer ch… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.20 | ColumnhwXdslLineStatusAttainableRateDs | read-only | current | Maximum Attainable Data Rate Downstream. The maximum downstream net data rate currently attainable by the xTU-C transmitter and the xTU-R receiver, coded in bi… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.21 | ColumnhwXdslLineStatusAttainableRateUs | read-only | current | Maximum Attainable Data Rate Upstream. The maximum upstream net data rate currently attainable by the xTU-R transmitter and the xTU-C receiver, coded in bit/s.… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.22 | ColumnhwXdslLineStatusActPsdDs | read-only | current | Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units o… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.23 | ColumnhwXdslLineStatusActPsdUs | read-only | current | Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 … |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.24 | ColumnhwXdslLineStatusActAtpDs | read-only | current | Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.25 | ColumnhwXdslLineStatusActAtpUs | read-only | current | Actual Aggregate Transmit Power Upstream. The total amount of transmit power delivered by the xTU-R at the U-R reference point, at the instant of measurement. … |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.26 | ColumnhwXdslLineBandPlan | read-only | current | Band contains a series of subcarriers. The first octet is the number of bands. Other octets describe the info of each band. Each band info is a pair of values … |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.27 | ColumnhwXdslLinePsdMaskClassSelection | read-only | current | The sub class of XDSL2 PSD Mask. |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.28 | ColumnhwXdslLineCurrentVdsl2Profile | read-only | current | This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. Options: 1. profile8a(1) - Profile 8a 2. profile8b(2… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.29 | ColumnhwXdslLineCnfgServiceProf | read-write | current | The value of this object identifies the row in the XDSL Line Configuration Service Profile Table, (hwXdslServProfTable), which applies for this XDSL line. |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.30 | ColumnhwXdslLineCnfgSpectrumProf | read-write | current | The value of this object identifies the row in the XDSL Line Configuration Spectrum Profile Table, (hwXdslSpectrumProfTable), which applies for this XDSL line. |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.31 | ColumnhwXdslLineCnfgDpboProf | read-write | current | The value of this object identifies the row in the XDSL Line Configuration Dpbo Profile Table, (hwXdslDpboProfTable), which applies for this XDSL line. |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.32 | ColumnhwXdslLineCnfgUpboProf | read-write | current | The value of this object identifies the row in the XDSL Line Configuration Upbo Profile Table, (hwXdslUpboProfTable), which applies for this XDSL line. |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.33 | ColumnhwXdslLineCnfgNoiseMarginProf | read-write | current | The value of this object identifies the row in the XDSL Line Configuration Noise Margin Profile Table, (hwXdslNoiseMarginProfTable), which applies for this XDS… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.34 | ColumnhwXdslLineCnfgDelayINPProf | read-write | current | The value of this object identifies the row in the XDSL Line Configuration Delay-INP Profile Table, (hwXdslDelayInpProfTable), which applies for this XDSL line. |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.35 | ColumnhwXdslUpboProfKl0CpeVal | read-only | current | The actual value of KL0_CPE parameter,it ranges from 0 to 1280 units of 0.1 dB. The invalid value is 4294967295. If data on the port cannot be queried, data on… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.36 | ColumnhwXdslLineStatusCodingGainDs | read-only | current | The actual value of Coding gain downstream parameter,it ranges from 0 to 16 units of 0.5 dB. The invalid value is 4294967295. If data on the port cannot be que… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.37 | ColumnhwXdslLineStatusCodingGainUs | read-only | current | The actual value of Coding gain upstream parameter,it ranges from 0 to 16 units of 0.5 dB. The invalid value is 4294967295. If data on the port cannot be queri… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.38 | ColumnhwXdslLineStatusPcbDs | read-only | current | The actual value of power cut back downstream parameter, it ranges from 0 to 40 units of 1 dB. The invalid value is 4294967295. If data on the port cannot be q… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.39 | ColumnhwxdslDlmDsmprofile | read-write | current | The value of this object identifies the row in the DLM/DSM Profile Table, which applies for this XDSL line. |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.40 | ColumnhwXdslLineActmode | read-only | current | Actived mode after training between co and cpe. Options: 1. ADSL(1) - ETSI,T1.413 G992.1,G992.2 2. ADSL2(2) - G992.3,G992.4 3. ADSL2PLUS(3) - G992.5 4. VDSL(4)… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.41 | ColumnhwXdslUpboProfKl0CoVal | read-only | current | The actual value of KL0_CO parameter, it ranges from 0 to 1280 units of 0.1 dB. The invalid value is 4294967295. If data on the port cannot be queried, data on… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.42 | ColumnhwXdslLineStatusRtxUsedDs | read-only | current | This parameter specifies whether G.998.4 retransmission is used in downstream. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in u… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.43 | ColumnhwXdslLineStatusRtxUsedUs | read-only | current | This parameter specifies whether G.998.4 retransmission is used in upstream. Options: 1. rtxInuse(1) - RTX in use 2. rtxUnusedModeForbidden(2) - RTX not in use… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.44 | ColumnhwXdslLineStatusLastRetrainInfo | read-only | current | Indicates the last retrained information performed on the line. Options: 1. none(1) - No record is available 2. cpeL3Trigger(2) - The terminal initiates a low … |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.45 | ColumnhwXdslUpboRxThreshDs | read-only | current | This parameter reports the downstream received signal level threshold value used in the Alternative Electrical Length Estimation method (ELE-M1). This paramete… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.46 | ColumnhwXdslUpboRxThreshUs | read-only | current | This parameter reports the upstream received signal level threshold value used in the Alternative Electrical Length Estimation method (ELE-M1). This parameter … |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.47 | ColumnhwXdslLineStatusLineRateDs | read-only | current | The actual line rate downstream. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated o… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.48 | ColumnhwXdslLineStatusLineRateUs | read-only | current | The actual line rate upstream. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data is generated on … |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.49 | ColumnhwXdslLineSplitterMode | read-write | current | This parameter indicates which mode will be applied to the port splitter . Options: 1. connect (1) - Splitter mode is connect or no splitter(always connected) … |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.50 | ColumnhwXdslLineBackup | read-write | current | This parameter indicates whether the port backup is enabled. Options: 1. enable(1) - Enable the port backup. 2. disable(2) - Disable the port backup. |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.51 | ColumnhwXdslLineBackupPort | read-only | current | This parameter indicates the backup port ifindex. If data on the port is invalid or no data is generated on the port, the port is not backed up. The invalid va… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.52 | ColumnhwXdslLinePhyRcontrol | read-write | current | This parameter indicates whether the PHY-R retransmission is enabling. In TR165 mode, the H80BVDPM board should be enabled when it works as ADSL mode. Options:… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.53 | ColumnhwXdslLineStatusActPsdLimitMask | read-only | current | (LIMITMASK). This parameter contains the actual G.993.2 limit PSD masks selected during showtime. Options: 1. annexA998D32(1) - D-32 2. annexA998D64(2) - D-64 … |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.54 | ColumnhwXdslLineStatusActRaModeDs | read-only | current | Actual transmit rate adaptation mode downstream. Options: 1. manual(1) - No Rate-Adaptation. The initialization process attempts to synchronize to a specified … |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.55 | ColumnhwXdslLineStatusActRaModeUs | read-only | current | Actual transmit rate adaptation mode upstream. Options: 1. manual(1) - No Rate-Adaptation. The initialization process attempts to synchronize to a specified ra… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.56 | ColumnhwXdslLineStatusActInpRocDs | read-only | current | This parameter reports the actual impulse noise protection (INP) of the ROC in the downstream direction. The value is coded in fractions of DMT symbols with a … |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.57 | ColumnhwXdslLineStatusActInpRocUs | read-only | current | This parameter reports the actual impulse noise protection (INP) of the ROC in the upstream direction. The value is coded in fractions of DMT symbols with a gr… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.58 | ColumnhwXdslLineStatusActSnrmRocDs | read-only | current | This parameter reports the actual SNR Margin of the ROC in the downstream direction. Downstream SNR Margin is the maximum increase in dB of the noise power rec… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.59 | ColumnhwXdslLineStatusActSnrmRocUs | read-only | current | This parameter reports the actual SNR Margin of the ROC in the upstream direction. Upstream SNR Margin is the maximum increase in dB of the noise power receive… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.60 | ColumnhwXdslLineCurrentGfastProfile | read-only | current | This parameter reports the current G.fast profile. Options: 1. fastprofile106(1) - The current G.fast profile is G.fast profile 106. 2. fastprofile212(2) - The… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.61 | ColumnhwXdslLineDetectionResult | read-only | current | Indicates current line detection result (possible failures) of the line. This is a bit-map of possible conditions. The various bit positions are: noFailure(0),… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.62 | ColumnhwXdslLineCurrentGfastSnrMarginRmcDs | read-only | current | This parameter reports the signal-to-noise ratio margin for the RMC in the downstream direction. It ranges from -511 to 511 units of 0.1 dB (Physical values ar… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.63 | ColumnhwXdslLineCurrentGfastSnrMarginRmcUs | read-only | current | This parameter reports the signal-to-noise ratio margin for the RMC in the upstream direction. It ranges from -511 to 511 units of 0.1 dB (Physical values are … |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.64 | ColumnhwXdslBypassAutoRecoverTime | read-write | current | This parameter indicates the automatic recovery time-out duration configuration, which can be configured as 0, or 60-86400 seconds. 0 is the special value indi… |
| 1.3.6.1.4.1.2011.6.115.1.1.1.1.65 | ColumnhwXdslLineVdsl2ProfileFallbackstatus | read-only | current | This parameter reports the G.993.2 profile fallback state. Options: 1. noFallback(1) - The G.993.2 profile fallback is not in use or not configured. 2. fallbac… |
| 1.3.6.1.4.1.2011.6.115.1.1.2 | TablehwOntXdslLineTable | not-accessible | current | The table hwOntXdslLineTable contains configuration, command and status parameters of the ONT XDSL port line. The indexes of this table are ifIndex, hwOntObjec… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1 | RowhwOntXdslLineEntry | not-accessible | current | The table hwOntXdslLineTable contains configuration, command and status parameters of the ONT XDSL port line. The indexes of this entry are ifIndex,hwOntObject… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.1 | ColumnhwOntObjectIndex | not-accessible | current | ONT ID. |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.2 | ColumnhwOntUniPhyType | not-accessible | current | This object indicates the physical type of ONT UNI. Options: 1. vdsl(37) - VDSL |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.3 | ColumnhwOntXdslPortid | not-accessible | current | The ONT XDSL port ID. |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.4 | ColumnhwOntXdslLineCnfgTemplate | read-write | current | The value of this object identifies the row in the XDSL Line Configuration Templates Table, (hwXdslLineConfTemplateTable), which applies for this XDSL line. |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.5 | ColumnhwOntXdslLineAlarmCnfgTemplate | read-write | current | The value of this object identifies the row in the XDSL Line Alarm Configuration Template Table, (hwXdslLineAlarmConfTemplateTable), which applies to this XDSL… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.6 | ColumnhwOntXdslLineAdminStatus | read-write | current | The current operational state of the ONT XDSL port. Options: 1. up(1) - indicates up operation. 2. down(2) - indicates down operation. |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.7 | ColumnhwOntXdslLineOperationStatus | read-only | current | ONT XDSL port status. Options: 1. activated(1) - indicates up status 2. activating(2) - indicates that the port is being activated 3. deactivated(3) - indicate… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.8 | ColumnhwOntXdslLineBandPlan | read-only | current | Band contains a series of subcarriers. The first octet is the number of bands. Other octets describe the info of each band. Each band info is a pair of values … |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.9 | ColumnhwOntXdslLineStatusAttainableRateDs | read-only | current | Maximum Attainable Data Rate Downstream. The maximum downstream net data rate currently attainable by the xTU-C transmitter and the xTU-R receiver, coded in bi… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.10 | ColumnhwOntXdslLineStatusAttainableRateUs | read-only | current | Maximum Attainable Data Rate Upstream. The maximum upstream net data rate currently attainable by the xTU-R transmitter and the xTU-C receiver, coded in bit/s.… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.11 | ColumnhwOntXdslLineStatusXtuTransSys | read-only | current | The xTU Transmission System (XTS) in use. This parameter may be derived from the handshaking procedures defined in Recommendation G.994.1. The invalid value is… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.12 | ColumnhwOntXdslLineStatusPwrMngState | read-only | current | The current power management state. Options: 1. L0 - Synchronized and full transmission 2. L1 - Low Power with reduced net data rate 3. L2 - Low Power with red… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.13 | ColumnhwOntXdslLineStatusInitResult | read-only | current | Indicates the result of the last full initialization performed on the line. Options: 1. noFail (0) - Successful initialization 2. configError (1) - Configurati… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.14 | ColumnhwOntXdslLineStatusActAtpDs | read-only | current | Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.15 | ColumnhwOntXdslLineStatusActAtpUs | read-only | current | Actual Aggregate Transmit Power Upstream. The total amount of transmit power delivered by the xTU-R at the U-R reference point, at the instant of measurement. … |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.16 | ColumnhwOntXdslLineCurrentVdsl2Profile | read-only | current | This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.17 | ColumnhwOntXdslLineStatusLnAttenDs | read-only | current | The measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub-carriers during diagnostics mode and… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.18 | ColumnhwOntXdslLineStatusLnAttenUs | read-only | current | The measured difference in the total power transmitted by the xTU-R and the total power received by the xTU-C over all sub- carriers during diagnostics mode an… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.19 | ColumnhwOntXdslLineStatusSigAttenDs | read-only | current | The measured difference in the total power transmitted by the xTU-C and the total power received by the xTU-R over all sub- carriers during Showtime. It ranges… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.20 | ColumnhwOntXdslLineStatusSigAttenUs | read-only | current | The measured difference in the total power transmitted by the xTU-R and the total power received by the xTU-C over all sub- carriers during Showtime. It ranges… |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.21 | ColumnhwOntXdslLineStatusSnrMarginDs | read-only | current | Downstream SNR Margin is the maximum increase in dB of the noise power received at the xTU-R, such that the BER requirements are met for all downstream bearer … |
| 1.3.6.1.4.1.2011.6.115.1.1.2.1.22 | ColumnhwOntXdslLineStatusSnrMarginUs | read-only | current | Upstream SNR Margin is the maximum increase in dB of the noise power received at the xTU-C, such that the BER requirements are met for all downstream bearer ch… |
| 1.3.6.1.4.1.2011.6.115.1.2 | NodehwXdslStatus | |||
| 1.3.6.1.4.1.2011.6.115.1.2.1 | TablehwXdslChannelStatusTable | not-accessible | current | The table hwXdslChannelStatusTable contains status parameters of XDSL channel. The indexes of this table are ifIndex and hwXdslChStatusUnit. |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1 | RowhwXdslChannelStatusEntry | not-accessible | current | The table hwXdslChannelStatusTable contains status parameters of XDSL channel. The indexes of this entry are ifIndex and hwXdslChStatusUnit. |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.1 | ColumnhwXdslChStatusUnit | not-accessible | current | The termination unit xTU-C(1) or xTU-R(2). |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.2 | ColumnhwXdslChStatusChannelNum | read-only | current | Provides the bearer channel number associated with this row (i.e., the channel ifIndex). This enables determining the channel configuration profile and the cha… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.3 | ColumnhwXdslChStatusActDataRate | read-only | current | If retransmission is not used in a given transmit direction, this parameter reports the actual net data rate at which the bearer channel is operating in L0 pow… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.4 | ColumnhwXdslChStatusPrevDataRate | read-only | current | If retransmission is not used in a given transmit direction, this parameter reports the previous net data rate the bearer channel was operating at just before … |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.5 | ColumnhwXdslChStatusActDelay | read-only | current | If retransmission is not used in a given transmit direction, this parameter is the actual one-way interleaving delay introduced by the PMS-TC excluding delay i… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.6 | ColumnhwXdslChStatusAtmStatus | read-only | current | Indicates current state (existing failures) of the XDSL channel in case its Data Path is ATM. This is a bit-map of possible conditions. Options: 1. noDefect(0)… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.7 | ColumnhwXdslChStatusPtmStatus | read-only | current | Indicates current state (existing failures) of the XDSL channel in case its Data Path is PTM. This is a bit-map of possible conditions. Options: 1. noFailure(0… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.8 | ColumnhwXdslChStatusINP | read-only | current | If retransmission is not used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) on the bearer channel in the L0 s… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.9 | ColumnhwXdslChStatusRSRedundancy | read-only | current | The actual number of Reed-Solomon redundancy bytes per codeword used in the latency path in which the bearer channel is transported. The value is coded in byte… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.10 | ColumnhwXdslChStatusRSSymbols | read-only | current | The DMT Symbol number per codeword used in the latency path in which the bearer channel is transported. The invalid value is 4294967295. If data on the port is… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.11 | ColumnhwXdslChStatusInterDepth | read-only | current | The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The value ranges from 1 to 4096 by step of 1. The va… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.12 | ColumnhwXdslChStatusSymbolLength | read-only | current | The actual number of bits per symbol assigned to the latency path in which the bearer channel is transported. This value does not include trellis overhead. The… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.13 | ColumnhwXdslChStatusRSSize | read-only | current | The actual Reed-Solomon codeword size used in the latency path in which the bearer channel is transported. The invalid value is 4294967295. If data on the port… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.14 | ColumnhwXdslChStatusInterBlockLength | read-only | current | The actual block length of the interleaver used in the latency path in which the bearer channel is transported. The invalid value is 4294967295. If data on the… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.15 | ColumnhwXdslChStatusLPATH | read-only | current | The index of the actual latency path in which the bearer is transported. The invalid value is 4294967295. If data on the port is invalid or no data is generate… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.16 | ColumnhwXdslChStatusPhyRrrcBits | read-only | current | The bits in the channel that used to retransmission. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.17 | ColumnhwXdslChStatusPhyRtxQueue | read-only | current | Queues in send buffer used for retransmission. The invalid value is 4294967295. If data on the port cannot be queried, data on the port is invalid, or no data … |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.18 | ColumnhwXdslChStatusActNetDataRate | read-only | current | In L0 state, this parameter reports the Net Data Rate at which the bearer channel is operating. In L2 state, this parameter contains the Net Data Rate in the p… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.19 | ColumnhwXdslChStatusActINPAgainstREIN | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against REIN (under specific conditio… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.20 | ColumnhwXdslChStatusUnlimitedVersionEtru | read-only | current | The unlimited version of expected throughput in kbit/s:(1 - RTxOH) * NDR. This value is specified in G.998.4 (G.INP). |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.21 | ColumnhwXdslChStatusActEftr | read-only | current | The actual error-free throughput (EFTR). The EFTR shall be measured in Showtime by the receiver. The EFTR shall be calculated every second. The EFTR is not a t… |
| 1.3.6.1.4.1.2011.6.115.1.2.1.1.22 | ColumnhwXdslChStatusInpReportingMode | read-only | current | This parameter reports the method used to compute the ACTINP. If set to 0, the ACTINP is computed according to the INP_no_erasure formula (see clause 9.6 of [I… |
| 1.3.6.1.4.1.2011.6.115.1.2.2 | TablehwXdslPrivSCStatusTable | not-accessible | current | The table hwXdslPrivSCStatusTable contains status parameters of XDSL sub-carriers. The indexes of this table are ifIndex and hwXdslPrivSCStatusDirection. |
| 1.3.6.1.4.1.2011.6.115.1.2.2.1 | RowhwXdslPrivSCStatusEntry | not-accessible | current | The table hwXdslPrivSCStatusTable contains status parameters of XDSL sub-carriers. The indexes of this entry are ifIndex and hwXdslPrivSCStatusDirection. |
| 1.3.6.1.4.1.2011.6.115.1.2.2.1.1 | ColumnhwXdslPrivSCStatusDirection | not-accessible | current | The direction of the sub-carrier either upstream or downstream. |
| 1.3.6.1.4.1.2011.6.115.1.2.2.1.2 | ColumnhwXdslPrivSCStatusMtime | read-only | current | SNR Measurement Time. The number of symbols used to measure the SNR values on the respective transmission direction. It should correspond to the value specifie… |
| 1.3.6.1.4.1.2011.6.115.1.2.2.1.3 | ColumnhwXdslPrivSCStatusSnr | read-only | current | The SNR Margin per sub-carrier, expressing the ratio between the received signal power and received noise power per subscriber. It is an array of 4096 bytes, d… |
| 1.3.6.1.4.1.2011.6.115.1.2.2.1.4 | ColumnhwXdslPrivSCStatusBitsAlloc | read-only | current | The bits allocation per sub-carrier. An array of 2048 bytes, designed for supporting up to 4096 sub-carriers. The number of utilized nibbles on downstream dire… |
| 1.3.6.1.4.1.2011.6.115.1.2.2.1.5 | ColumnhwXdslPrivSCStatusGainAlloc | read-only | current | The gain allocation per sub-carrier. An array of 8192 bytes, designed for supporting up to 4096 sub-carriers. The number of utilized octets on downstream direc… |
| 1.3.6.1.4.1.2011.6.115.1.2.3 | TablehwXdslSCStatusTable | not-accessible | current | The table hwXdslSCStatusTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2/ADSL2+ and FAST that DO NOT refer to specific sub-carriers. In additi… |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1 | RowhwXdslSCStatusEntry | not-accessible | current | The table hwXdslSCStatusTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2/ADSL2+ and FAST that DO NOT refer to specific sub-carriers. In additi… |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.1 | ColumnhwXdslSCStatusDirection | not-accessible | current | The direction of the sub-carrier either upstream or downstream |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.2 | ColumnhwXdslSCStatusLinScale | read-only | current | The scale factor to be applied to the H(f) linear representation values for the respective transmission direction. This parameter is only available after a loo… |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.3 | ColumnhwXdslSCStatusLinScGroupSize | read-only | current | Number of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4, … |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.4 | ColumnhwXdslSCStatusLogMt | read-only | current | The number of symbols used to measure the H(f) logarithmic measurement values for the respective transmission direction. This parameter should correspond to th… |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.5 | ColumnhwXdslSCStatusLogScGroupSize | read-only | current | Number of sub-carriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2… |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.6 | ColumnhwXdslSCStatusQlnMt | read-only | current | The number of symbols used to measure the Quiet Line Noise values on the respective transmission direction. This parameter should correspond to the value speci… |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.7 | ColumnhwXdslSCStatusQlnScGroupSize | read-only | current | Number of sub-carriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4, 8 and 16. … |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.8 | ColumnhwXdslSCStatusMtime | read-only | current | SNR Measurement Time. The number of symbols used to measure the SNR values on the respective transmission direction. It should correspond to the value specifie… |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.9 | ColumnhwXdslSCStatusSnrScGroupSize | read-only | current | Number of sub-carriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4, 8 and 16. For ADSL, this… |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.10 | ColumnhwXdslSCStatusAttainableRate | read-only | current | Maximum Attainable Data Rate. The maximum net data rate currently attainable by the XTU-C transmitter and XTU-R receiver (when referring to downstream directio… |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.11 | ColumnhwXdslSCStatusActAtp | read-only | current | Actual Aggregate Transmit Power from the XTU (XTU-R on downstream direction and XTU-C on upstream direction), at the instant of measurement. It ranges from -31… |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.12 | ColumnhwXdslSCStatusRowStatus | read-create | current | Row Status. The SNMP agent should create rows in this table and in the hwXdslSCStatusTable for storing the results of a DELT performed on the associated line, … |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.13 | ColumnhwXdslSCStatusProfile | read-only | current | This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. |
| 1.3.6.1.4.1.2011.6.115.1.2.3.1.14 | ColumnhwXdslSCStatusClassmask | read-only | current | In order to reduce the number of configuration possibilities, the limit PSD masks are grouped in the following PSD mask classes: - Class 998 Annex A: D-32, D-6… |
| 1.3.6.1.4.1.2011.6.115.1.2.4 | TablehwXdslSCStatusBandTable | not-accessible | current | The table hwXdslSCStatusBandTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2/ADSL2+ and FAST that are grouped per-band. For ADSL/ADSL2/ADSL2+,… |
| 1.3.6.1.4.1.2011.6.115.1.2.4.1 | RowhwXdslSCStatusBandEntry | not-accessible | current | The table hwXdslSCStatusBandTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2/ADSL2+ and FAST that are grouped per-band. For ADSL/ADSL2/ADSL2+,… |
| 1.3.6.1.4.1.2011.6.115.1.2.4.1.1 | ColumnhwXdslSCStatusBand | not-accessible | current | The transmission band. Identifies a band in a VDSL2/ADSL/ADSL2/ADSL2+ and FAST link. For a band in the upstream direction, transmission is from the remote end … |
| 1.3.6.1.4.1.2011.6.115.1.2.4.1.2 | ColumnhwXdslSCStatusBandLnAtten | read-only | current | When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by… |
| 1.3.6.1.4.1.2011.6.115.1.2.4.1.3 | ColumnhwXdslSCStatusBandSigAtten | read-only | current | When referring to a band the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by th… |
| 1.3.6.1.4.1.2011.6.115.1.2.4.1.4 | ColumnhwXdslSCStatusBandSnrMargin | read-only | current | SNR Margin is the maximum increase in dB of the noise power received at the XTU (xTU-R on downstream direction and xTU-C on upstream direction), such that the … |
| 1.3.6.1.4.1.2011.6.115.1.2.4.1.5 | ColumnhwXdslSCStatusBandUpbokle | read-only | current | This parameter is a vector of UPBO electrical length per-band estimates for each supported upstream/downstream band, expressed in dB at 1 MHz (kl0) calculated … |
| 1.3.6.1.4.1.2011.6.115.1.2.5 | TablehwXdslSCStatusSegmentTable | not-accessible | current | The table hwXdslSCStatusSegmentTable contains status parameters of VDSL2/ADSL/ADSL2/ADSL2+ and FAST sub-carriers. Several objects in the table refer to NSus an… |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1 | RowhwXdslSCStatusSegmentEntry | not-accessible | current | The table hwXdslSCStatusSegmentTable contains status parameters of VDSL2/ADSL/ADSL2/ADSL2+ and FAST sub-carriers. Several objects in the table refer to NSus an… |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.1 | ColumnhwXdslSCStatusSegment | not-accessible | current | The segment of the sub-carriers status information provided by this row. Several status parameters in this table are retrieved in segments. The first segment o… |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.2 | ColumnhwXdslSCStatusSegmentLinReal | read-only | current | An array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is designed to support up to 512 … |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.3 | ColumnhwXdslSCStatusSegmentLinImg | read-only | current | An array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is designed to support up to 512 … |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.4 | ColumnhwXdslSCStatusSegmentLog | read-only | current | An array of up to 512 real H(f) logarithmic representation values in dB for the respective transmission direction. It is designed to support up to 512 (downstr… |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.5 | ColumnhwXdslSCStatusSegmentQln | read-only | current | An array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to 512 (downstream) sub-carriers … |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.6 | ColumnhwXdslSCStatusSegmentSnr | read-only | current | The SNR Margin per sub-carrier group, expressing the ratio between the received signal power and received noise power per sub-scriber group. It is an array of … |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.7 | ColumnhwXdslSCStatusSegmentBitsAlloc | read-only | current | The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. When more then 512 sub-… |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.8 | ColumnhwXdslSCStatusSegmentGainAlloc | read-only | current | The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carri… |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.9 | ColumnhwXdslSCStatusSegmentTssi | read-only | current | The transmit spectrum shaping (TSSi) breakpoints expressed as the set of breakpoints exchanged during G.994.1. Each breakpoint is a pair of values occupying 3 … |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.65535 | ColumnhwXdslSCStatusSegmentTxPSD | read-only | current | The TxPSD per sub-carrier. An array of 512 8-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carriers are sup… |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.65536 | ColumnhwXdslSCStatusSegmentSnrMargin | read-only | current | The SnrMargin per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carriers ar… |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.65537 | ColumnhwXdslSCStatusSegmentLogScGroupSize | read-only | current | Number of sub-carriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2… |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.65538 | ColumnhwXdslSCStatusSegmentQlnScGroupSize | read-only | current | Number of sub-carriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4, 8 and 16. … |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.65539 | ColumnhwXdslSCStatusSegmentLinScGroupSize | read-only | current | Number of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4, … |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.65540 | ColumnhwXdslSCStatusSegmentSnrScGroupSize | read-only | current | Number of sub-carriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4, 8 and 16. For ADSL, this… |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.65541 | ColumnhwXdslSCStatusSegmentQlnWithVectoring | read-only | current | An array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to 512 (downstream) sub-carriers … |
| 1.3.6.1.4.1.2011.6.115.1.2.5.1.65542 | ColumnhwXdslSCStatusSegmentBitsAllocRmc | read-only | current | The bit allocation values on RMC sub-carriers in RMC symbols. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers… |
| 1.3.6.1.4.1.2011.6.115.1.2.6 | TablehwXdslVDSLSCFextTable | not-accessible | current | The table hwXdslVDSLSCFextTable contains FEXT coupling function parameters. The indexes of this table are ifIndex, hwXdslVDSLSCFextFromIfindex, and hwXdslVDSLS… |
| 1.3.6.1.4.1.2011.6.115.1.2.6.1 | RowhwXdslVDSLSCFextEntry | not-accessible | current | The table hwXdslVDSLSCFextTable contains FEXT coupling function parameters. The indexes of this entry are ifIndex, hwXdslVDSLSCFextFromIfindex, and hwXdslVDSLS… |
| 1.3.6.1.4.1.2011.6.115.1.2.6.1.1 | ColumnhwXdslVDSLSCFextFromIfindex | not-accessible | current | The hwXdslVDSLSCFextFromIfindex is an interface index where the interface has an ifType of vdsl2(251). |
| 1.3.6.1.4.1.2011.6.115.1.2.6.1.2 | ColumnhwXdslVDSLSCFextRequestXLinScGroupSize | not-accessible | current | This parameter is the requested value of XLING. The valid values are 1, 2, 4, 8, 16, 32, and 64. |
| 1.3.6.1.4.1.2011.6.115.1.2.6.1.3 | ColumnhwXdslVDSLSCFextXLinScaleDs | read-only | current | This parameter is the scale factor to be applied to the downstream Xlinpsds values. It is represented as an unsigned integer in the range from 1 to 2^16 - 1. |
| 1.3.6.1.4.1.2011.6.115.1.2.6.1.4 | ColumnhwXdslVDSLSCFextXlinScGroupSizeDs | read-only | current | This parameter is the number of subcarriers per group used to report Xlinpsds. The valid values are 1, 2, 4, 8, 16, 32, and 64. XLINGds should equal the sub-sa… |
| 1.3.6.1.4.1.2011.6.115.1.2.6.1.5 | ColumnhwXdslVDSLSCFextXLinBandDs | read-only | current | XLINBANDSds contains pairs of (start_subcarrier_index, stop_subcarrier_index) for every band in which XLINpsds is reported. |
| 1.3.6.1.4.1.2011.6.115.1.2.6.1.6 | ColumnhwXdslVDSLSCFextXlinRealDs | read-only | current | For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for downstream FEXT coupling coefficients Xlinds(f… |
| 1.3.6.1.4.1.2011.6.115.1.2.6.1.7 | ColumnhwXdslVDSLSCFextXlinImgDs | read-only | current | For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for downstream FEXT coupling coefficients Xlinds(f… |
| 1.3.6.1.4.1.2011.6.115.1.2.6.1.8 | ColumnhwXdslVDSLSCFextXLinScaleUs | read-only | current | This parameter is the scale factor to be applied to the upstream Xlinpsus values. It is represented as an unsigned integer in the range from 1 to 2^16 - 1. |
| 1.3.6.1.4.1.2011.6.115.1.2.6.1.9 | ColumnhwXdslVDSLSCFextXlinScGroupSizeUs | read-only | current | This parameter is the number of subcarriers per group used to report Xlinpsus. The valid values are 1, 2, 4, 8, 16, 32, and 64. XLINGus should equal the sub-sa… |
| 1.3.6.1.4.1.2011.6.115.1.2.6.1.10 | ColumnhwXdslVDSLSCFextXLinBandUs | read-only | current | XLINBANDSus contains pairs of (start_subcarrier_index, stop_subcarrier_index) for every band in which XLINpsus is reported. |
| 1.3.6.1.4.1.2011.6.115.1.2.6.1.11 | ColumnhwXdslVDSLSCFextXlinRealUs | read-only | current | For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for upstream FEXT coupling coefficients Xlinus(f) … |
| 1.3.6.1.4.1.2011.6.115.1.2.6.1.12 | ColumnhwXdslVDSLSCFextXlinImgUs | read-only | current | For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for upstream FEXT coupling coefficients Xlinus(f) … |
| 1.3.6.1.4.1.2011.6.115.1.2.7 | TablehwOntXdslChannelStatusTable | not-accessible | current | The table hwOntXdslChannelStatusTable contains status parameters of XDSL channel. The indexes of this table are ifIndex, hwOntObjectIndex, hwOntUniPhyType, hwO… |
| 1.3.6.1.4.1.2011.6.115.1.2.7.1 | RowhwOntXdslChannelStatusEntry | not-accessible | current | The table hwOntXdslChannelStatusTable contains status parameters of XDSL channel. The indexes of this entry are ifIndex, hwOntObjectIndex, hwOntUniPhyType, hwO… |
| 1.3.6.1.4.1.2011.6.115.1.2.7.1.1 | ColumnhwOntXdslChannelID | not-accessible | current | Channel ID. |
| 1.3.6.1.4.1.2011.6.115.1.2.7.1.2 | ColumnhwOntXdslChStatusUnit | not-accessible | current | The termination unit xTU-C(1) or xTU-R(2). |
| 1.3.6.1.4.1.2011.6.115.1.2.7.1.3 | ColumnhwOntXdslChStatusActNetDataRate | read-only | current | If retransmission is not used in a given transmit direction, this parameter reports the actual net data rate at which the bearer channel is operating in L0 pow… |
| 1.3.6.1.4.1.2011.6.115.1.2.7.1.4 | ColumnhwOntXdslChStatusPrevNetDataRate | read-only | current | If retransmission is not used in a given transmit direction, this parameter reports the previous net data rate the bearer channel was operating at just before … |
| 1.3.6.1.4.1.2011.6.115.1.2.7.1.5 | ColumnhwOntXdslChStatusActDelay | read-only | current | If retransmission is not used in a given transmit direction, this parameter is the actual one-way interleaving delay introduced by the PMS-TC excluding delay i… |
| 1.3.6.1.4.1.2011.6.115.1.2.7.1.6 | ColumnhwOntXdslChStatusINP | read-only | current | If retransmission is not used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) on the bearer channel in the L0 s… |
| 1.3.6.1.4.1.2011.6.115.1.2.8 | TablehwOntXdslSCStatusBandTable | not-accessible | current | The table hwOntXdslSCStatusBandTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2/ADSL2+ and FAST that are grouped per-band. For ADSL/ADSL2/ADSL… |
| 1.3.6.1.4.1.2011.6.115.1.2.8.1 | RowhwOntXdslSCStatusBandEntry | not-accessible | current | The table hwOntXdslSCStatusBandTable contains sub-carrier status parameters for VDSL2/ADSL/ADSL2/ADSL2+ and FAST that are grouped per-band. For ADSL/ADSL2/ADSL… |
| 1.3.6.1.4.1.2011.6.115.1.2.8.1.1 | ColumnhwOntXdslSCStatusBand | not-accessible | current | The transmission band. Identifies a band in a VDSL2/ADSL/ADSL2/ADSL2+ and FAST link. For a band in the upstream direction, transmission is from the remote end … |
| 1.3.6.1.4.1.2011.6.115.1.2.8.1.2 | ColumnhwOntXdslSCStatusBandLnAtten | read-only | current | When referring to a band in the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by… |
| 1.3.6.1.4.1.2011.6.115.1.2.8.1.3 | ColumnhwOntXdslSCStatusBandSigAtten | read-only | current | When referring to a band the downstream direction, it is the measured difference in the total power transmitted by the xTU-C and the total power received by th… |
| 1.3.6.1.4.1.2011.6.115.1.2.8.1.4 | ColumnhwOntXdslSCStatusBandSnrMargin | read-only | current | SNR Margin is the maximum increase in dB of the noise power received at the XTU (xTU-R on downstream direction and xTU-C on upstream direction), such that the … |
| 1.3.6.1.4.1.2011.6.115.1.2.9 | TablehwXdslSCFextTable | not-accessible | current | The table hwXdslSCFextTable contains FEXT coupling function parameters. The indexes of this table are ifIndex, hwXdslSCFextFromIfindex, hwXdslSCFextRequestXLin… |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1 | RowhwXdslSCFextEntry | not-accessible | current | The table hwXdslSCFextTable contains FEXT coupling function parameters. The indexes of this entry are ifIndex, hwXdslSCFextFromIfindex, hwXdslSCFextRequestXLin… |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1.1 | ColumnhwXdslSCFextFromIfindex | not-accessible | current | The hwXdslSCFextFromIfindex is an interface index where the interface has an ifType of G.fast(279) or vdsl2(251). |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1.2 | ColumnhwXdslSCFextRequestXLinScGroupSize | not-accessible | current | This parameter is the requested value of XLING. The valid values are 1, 2, 4, 8, 16, 32, and 64. |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1.3 | ColumnhwXdslSCFextSegment | not-accessible | current | The segment of the XLING information provided by this row. Several XLING parameters in this table are retrieved in segments. The first segment of the XLING par… |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1.4 | ColumnhwXdslSCFextXLinScaleDs | read-only | current | This parameter is the scale factor to be applied to the downstream Xlinpsds values. It is represented as an unsigned integer in the range from 1 to 2^16 - 1. I… |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1.5 | ColumnhwXdslSCFextXlinScGroupSizeDs | read-only | current | This parameter is the number of subcarriers per group used to report Xlinpsds. The valid values are 1, 2, 4, 8, 16, 32, and 64. XLINGds should equal the sub-sa… |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1.6 | ColumnhwXdslSCFextXLinBandDs | read-only | current | XLINBANDSds contains pairs of (start_subcarrier_index, stop_subcarrier_index) for every band in which XLINpsds is reported. It's available for the first segmen… |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1.7 | ColumnhwXdslSCFextXlinRealDs | read-only | current | An array of 512 32-bits values. For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for downstream FEX… |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1.8 | ColumnhwXdslSCFextXlinImgDs | read-only | current | An array of 512 32-bits values. For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for downstream FEX… |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1.9 | ColumnhwXdslSCFextXLinScaleUs | read-only | current | This parameter is the scale factor to be applied to the upstream Xlinpsus values. It is represented as an unsigned integer in the range from 1 to 2^16 - 1. |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1.10 | ColumnhwXdslSCFextXlinScGroupSizeUs | read-only | current | This parameter is the number of subcarriers per group used to report Xlinpsus. The valid values are 1, 2, 4, 8, 16, 32, and 64. XLINGus should equal the sub-sa… |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1.11 | ColumnhwXdslSCFextXLinBandUs | read-only | current | XLINBANDSus contains pairs of (start_subcarrier_index, stop_subcarrier_index) for every band in which XLINpsus is reported. |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1.12 | ColumnhwXdslSCFextXlinRealUs | read-only | current | An array of 512 32-bits values. For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for upstream FEXT … |
| 1.3.6.1.4.1.2011.6.115.1.2.9.1.13 | ColumnhwXdslSCFextXlinImgUs | read-only | current | An array of 512 32-bits values. For each given VCE port index k, this parameter is a one-dimensional array of complex values in linear scale for upstream FEXT … |
| 1.3.6.1.4.1.2011.6.115.1.2.10 | TablehwOntXdslSCStatusSegmentTable | not-accessible | current | The table hwOntXdslSCStatusSegmentTable contains status parameters of ONT VDSL2 sub-carriers. Several objects in the table refer to NSus and NSds. For G.993.2,… |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1 | RowhwOntXdslSCStatusSegmentEntry | not-accessible | current | The table hwOntXdslSCStatusSegmentTable contains status parameters of ONT VDSL2 sub-carriers. Several objects in the table refer to NSus and NSds. For G.993.2,… |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.1 | ColumnhwOntXdslSCStatusDirection | not-accessible | current | The direction of the ONT sub-carrier either upstream or downstream. |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.2 | ColumnhwOntXdslSCStatusSegment | not-accessible | current | The segment of the sub-carriers status information provided by this row. Several status parameters in this table are retrieved in segments. The first segment o… |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.3 | ColumnhwOntXdslSCStatusSegmentLinReal | read-only | current | An array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is designed to support up to 512 … |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.4 | ColumnhwOntXdslSCStatusSegmentLinImg | read-only | current | An array of up to 512 complex H(f) linear representation values in linear scale for the respective transmission direction. It is designed to support up to 512 … |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.5 | ColumnhwOntXdslSCStatusSegmentLog | read-only | current | An array of up to 512 real H(f) logarithmic representation values in dB for the respective transmission direction. It is designed to support up to 512 (downstr… |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.6 | ColumnhwOntXdslSCStatusSegmentQln | read-only | current | An array of up to 512 real Quiet Line Noise values in dBm/Hz for the respective transmission direction. It is designed for up to 512 (downstream) sub-carriers … |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.7 | ColumnhwOntXdslSCStatusSegmentSnr | read-only | current | The SNR Margin per sub-carrier group, expressing the ratio between the received signal power and received noise power per sub-scriber group. It is an array of … |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.8 | ColumnhwOntXdslSCStatusSegmentBitsAlloc | read-only | current | The bits allocation per sub-carrier. An array of 256 octets (512 nibbles), designed for supporting up to 512 (downstream) sub-carriers. When more then 512 sub-… |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.9 | ColumnhwOntXdslSCStatusSegmentGainAlloc | read-only | current | The gain allocation per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carri… |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.65535 | ColumnhwOntXdslSCStatusSegmentTxPSD | read-only | current | The TxPSD per sub-carrier. An array of 512 8-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carriers are sup… |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.65536 | ColumnhwOntXdslSCStatusSegmentSnrMargin | read-only | current | The SnrMargin per sub-carrier. An array of 512 16-bits values, designed for supporting up to 512 (downstream) sub- carriers. When more then 512 sub-carriers ar… |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.65537 | ColumnhwOntXdslSCStatusSegmentLogScGroupSize | read-only | current | Number of sub-carriers per group used to report the H(f) logarithmic representation values for the respective transmission direction. The valid values are 1, 2… |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.65538 | ColumnhwOntXdslSCStatusSegmentQlnScGroupSize | read-only | current | Number of sub-carriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4, 8 and 16. … |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.65539 | ColumnhwOntXdslSCStatusSegmentLinScGroupSize | read-only | current | Number of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4, … |
| 1.3.6.1.4.1.2011.6.115.1.2.10.1.65540 | ColumnhwOntXdslSCStatusSegmentSnrScGroupSize | read-only | current | Number of sub-carriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4, 8 and 16. For ONT XDSL, … |
| 1.3.6.1.4.1.2011.6.115.1.3 | NodehwXdslInventory | |||
| 1.3.6.1.4.1.2011.6.115.1.3.1 | TablehwXdslLineInventoryTable | not-accessible | current | The table hwXdslLineInventoryTable contains inventory of XDSL2 unit. The indexes of this table are ifIndex and hwXdslLInvUnit. |
| 1.3.6.1.4.1.2011.6.115.1.3.1.1 | RowhwXdslLineInventoryEntry | not-accessible | current | The table hwXdslLineInventoryTable contains inventory of XDSL2 unit. The indexes of this entry are ifIndex and hwXdslLInvUnit. |
| 1.3.6.1.4.1.2011.6.115.1.3.1.1.1 | ColumnhwXdslLInvUnit | not-accessible | current | The termination unit XTUC{1} or XTUR{2}. |
| 1.3.6.1.4.1.2011.6.115.1.3.1.1.2 | ColumnhwXdslLInvG994VendorId | read-only | current | The xTU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocat… |
| 1.3.6.1.4.1.2011.6.115.1.3.1.1.3 | ColumnhwXdslLInvSystemVendorId | read-only | current | The xTU System Vendor ID (identifies the xTU system integrator) as inserted in the Overhead Messages (both xTUs for G.992.3 and G.992.4) or in the Embedded Ope… |
| 1.3.6.1.4.1.2011.6.115.1.3.1.1.4 | ColumnhwXdslLInvVersionNumber | read-only | current | The xTU version number (vendor specific information) as inserted in the Overhead Messages (both xTUs for G.992.3 and G.992.4) or in the Embedded Operations Cha… |
| 1.3.6.1.4.1.2011.6.115.1.3.1.1.5 | ColumnhwXdslLInvSerialNumber | read-only | current | The xTU serial number (vendor specific information) as inserted in the Overhead Messages (both xTUs for G.992.3 and G.992.4) or in the Embedded Operations Chan… |
| 1.3.6.1.4.1.2011.6.115.1.3.1.1.6 | ColumnhwXdslLInvSelfTestResult | read-only | current | The xTU self-test result, coded as a 32-bit integer. The most significant octet of this object is '0' if the self-test passed, and '1' if the self-test failed.… |
| 1.3.6.1.4.1.2011.6.115.1.3.1.1.7 | ColumnhwXdslLInvTransmissionCapabilities | read-only | current | The xTU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' me… |
| 1.3.6.1.4.1.2011.6.115.1.3.1.1.8 | ColumnhwXdslLInvModelId | read-only | current | The XTU model ID. |
| 1.3.6.1.4.1.2011.6.115.1.3.2 | TablehwOntXdslLineInventoryTable | not-accessible | current | The table hwOntXdslLineInventoryTable contains inventory of XDSL unit. The indexes of this table are ifIndex, hwOntObjectIndex, hwOntUniPhyType, hwOntXdslPorti… |
| 1.3.6.1.4.1.2011.6.115.1.3.2.1 | RowhwOntXdslLineInventoryEntry | not-accessible | current | The table hwOntXdslLineInventoryTable contains inventory of XDSL unit. The indexes of this entry are ifIndex, hwOntObjectIndex, hwOntUniPhyType, hwOntXdslPorti… |
| 1.3.6.1.4.1.2011.6.115.1.3.2.1.1 | ColumnhwOntXdslLInvUnit | not-accessible | current | The termination unit XTUC{1} or XTUR{2}. |
| 1.3.6.1.4.1.2011.6.115.1.3.2.1.2 | ColumnhwOntXdslLInvG994VendorId | read-only | current | The xTU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocat… |
| 1.3.6.1.4.1.2011.6.115.1.3.2.1.3 | ColumnhwOntXdslLInvSystemVendorId | read-only | current | The xTU System Vendor ID (identifies the xTU system integrator) as inserted in the Overhead Messages (both xTUs for G.992.3 and G.992.4) or in the Embedded Ope… |
| 1.3.6.1.4.1.2011.6.115.1.3.2.1.4 | ColumnhwOntXdslLInvVersionNumber | read-only | current | The xTU version number (vendor specific information) as inserted in the Overhead Messages (both xTUs for G.992.3 and G.992.4) or in the Embedded Operations Cha… |
| 1.3.6.1.4.1.2011.6.115.1.3.2.1.5 | ColumnhwOntXdslLInvSerialNumber | read-only | current | The xTU serial number (vendor specific information) as inserted in the Overhead Messages (both xTUs for G.992.3 and G.992.4) or in the Embedded Operations Chan… |
| 1.3.6.1.4.1.2011.6.115.1.3.2.1.6 | ColumnhwOntXdslLInvSelfTestResult | read-only | current | The xTU self-test result, coded as a 32-bit integer. The most significant octet of this object is '0' if the self-test passed, and '1' if the self-test failed.… |
| 1.3.6.1.4.1.2011.6.115.1.3.2.1.7 | ColumnhwOntXdslLInvTransmissionCapabilities | read-only | current | The xTU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' me… |
| 1.3.6.1.4.1.2011.6.115.1.3.2.1.8 | ColumnhwOntXdslLInvModelId | read-only | current | The XTU model ID. |
| 1.3.6.1.4.1.2011.6.115.1.4 | NodehwXdslPM | |||
| 1.3.6.1.4.1.2011.6.115.1.4.1 | NodehwXdslPMLine | |||
| 1.3.6.1.4.1.2011.6.115.1.4.1.1 | TablehwXdslPMLineCurrTable | not-accessible | current | The table hwXdslPMLineCurrTable contains current Performance Monitoring results of XDSL line. The indexes of this table are an interface index where the interf… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1 | RowhwXdslPMLineCurrEntry | not-accessible | current | The table hwXdslPMLineCurrTable contains current Performance Monitoring results of XDSL line. The indexes of this entry are an interface index where the interf… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.1 | ColumnhwXdslPMLCurrUnit | not-accessible | current | The termination unit XTUC{1} or XTUR{2}. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.2 | ColumnhwXdslPMLCurrValidIntervals | read-only | current | Valid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.3 | ColumnhwXdslPMLCurrInvalidIntervals | read-only | current | Invalid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.4 | ColumnhwXdslPMLCurr15MTimeElapsed | read-only | current | Total elapsed seconds in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.5 | ColumnhwXdslPMLCurr15MFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibite… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.6 | ColumnhwXdslPMLCurr15MEs | read-only | current | Count of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1 xTU-R: F… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.7 | ColumnhwXdslPMLCurr15MSes | read-only | current | Count of seconds during this interval that there was: xTU-C: If G.998.4 is supported and retransmission is enabled in the near-end received direction, a SES is… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.8 | ColumnhwXdslPMLCurr15MLoss | read-only | current | Count of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.9 | ColumnhwXdslPMLCurr15MUas | read-only | current | Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely-errored seconds, and ends at the on… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.10 | ColumnhwXdslPMLCurr1DayValidIntervals | read-only | current | Valid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.11 | ColumnhwXdslPMLCurr1DayInvalidIntervals | read-only | current | Invalid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.12 | ColumnhwXdslPMLCurr1DayTimeElapsed | read-only | current | Total elapsed seconds in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.13 | ColumnhwXdslPMLCurr1DayFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibite… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.14 | ColumnhwXdslPMLCurr1DayEs | read-only | current | Count of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.15 | ColumnhwXdslPMLCurr1DaySes | read-only | current | Count of seconds during this interval that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.16 | ColumnhwXdslPMLCurr1DayLoss | read-only | current | Count of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.17 | ColumnhwXdslPMLCurr1DayUas | read-only | current | Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the o… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.18 | ColumnhwXdslPMLEverBeforeFecs | read-only | current | Count of seconds since agent reset that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited d… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.19 | ColumnhwXdslPMLEverBeforeEs | read-only | current | Count of seconds since agent reset that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: FEB… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.20 | ColumnhwXdslPMLEverBeforeSes | read-only | current | Count of seconds since agent reset that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.21 | ColumnhwXdslPMLEverBeforeLoss | read-only | current | Count of seconds since agent reset that there was LOS (or LOS-FE for xTU-R). Huawei defined. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.22 | ColumnhwXdslPMLEverBeforeUas | read-only | current | Count of seconds in Unavailability State since agent reset. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the onse… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.23 | ColumnhwXdslPMLCurr15MLofs | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Framing. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.24 | ColumnhwXdslPMLCurr15MLols | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Link. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.25 | ColumnhwXdslPMLCurr15MLops | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Power. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.26 | ColumnhwXdslPMLCurr1DayLofs | read-only | current | Count of the number of seconds when there was Loss of Framing during the current day. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.27 | ColumnhwXdslPMLCurr1DayLols | read-only | current | Count of the number of seconds when there was Loss of Link during the current day. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.28 | ColumnhwXdslPMLCurr1DayLops | read-only | current | Count of the number of seconds when there was Loss of Power during the current day. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.29 | ColumnhwXdslPMLEverBeforeLofs | read-only | current | Count of the number of seconds when there was Loss of Framing since agent reset. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.30 | ColumnhwXdslPMLEverBeforeLols | read-only | current | Count of the number of seconds when there was Loss of Link since agent reset. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.31 | ColumnhwXdslPMLEverBeforeLops | read-only | current | Count of the number of seconds when there was Loss of Power since agent reset. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.32 | ColumnhwXdslPMLCurr15MSosSuccess | read-only | current | If the line is activated as G9701 of hwXdslLineStatusXtuTransSys, the parameter is count of the total number of successful FRA procedures initiated in the curr… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.33 | ColumnhwXdslPMLCurr1DaySosSuccess | read-only | current | If the line is activated as G9701 of hwXdslLineStatusXtuTransSys, the parameter is count of the total number of successful FRA procedures initiated during the … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.34 | ColumnhwXdslPMLEverBeforeSosSuccess | read-only | current | If the line is activated as G9701 of hwXdslLineStatusXtuTransSys, the parameter is count of the total number of successful FRA procedures initiated since agent… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.35 | ColumnhwXdslPMLCurr15MInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 15 minutes. Each INMAINPEQ needs 4 bytes, Each four bytes, arranged … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.36 | ColumnhwXdslPMLCurr15MInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.37 | ColumnhwXdslPMLCurr15MInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line during current 15 minutes. Each INMAIAT needs 4 bytes. Each four bytes, arranged in d… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.38 | ColumnhwXdslPMLCurr1DayInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 1 day. Each INMAINPEQ needs 4 bytes, Each four bytes, arranged in de… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.39 | ColumnhwXdslPMLCurr1DayInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.40 | ColumnhwXdslPMLCurr1DayInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line during current 1 day. Each INMAIAT needs 4 bytes. Each four bytes, arranged in descen… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.41 | ColumnhwXdslPMLEverBeforeInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line ever before. Each INMAINPEQ needs 4 bytes, Each four bytes, arranged in descending … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.42 | ColumnhwXdslPMLEverBeforeInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.43 | ColumnhwXdslPMLEverBeforeInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line ever before. Each INMAIAT needs 4 bytes. Each four bytes, arranged in descending sign… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.44 | ColumnhwXdslPMLineCurr15MStartTime | read-only | current | Start time of the current 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.45 | ColumnhwXdslPMLineCurr1DayStartTime | read-only | current | Start time of the current 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.46 | ColumnhwXdslPMLCurr15MLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 15 min… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.47 | ColumnhwXdslPMLCurr15MEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 15 minutes accumulation p… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.48 | ColumnhwXdslPMLCurr15MMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minute… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.49 | ColumnhwXdslPMLCurr1DayLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 24 hou… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.50 | ColumnhwXdslPMLCurr1DayEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 24 hours accumulation per… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.51 | ColumnhwXdslPMLCurr1DayMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 24 hours … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.52 | ColumnhwXdslPMLEverBeforeLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.53 | ColumnhwXdslPMLEverBeforeEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.54 | ColumnhwXdslPMLEverBeforeMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.55 | ColumnhwXdslPMLEverBeforeSraDownShiftEvent | read-only | current | This parameter is a count of sra down-shift event occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.56 | ColumnhwXdslPMLEverBeforeSraUpShiftEvent | read-only | current | This parameter is a count of sra up-shift event occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.57 | ColumnhwXdslPMLCurr15MSraDownShiftEvent | read-only | current | This parameter is a count of sra down-shift event occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.58 | ColumnhwXdslPMLCurr15MSraUpShiftEvent | read-only | current | This parameter is a count of sra up-shift event occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.59 | ColumnhwXdslPMLCurr1DaySraDownShiftEvent | read-only | current | This parameter is a count of sra down-shift event occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.60 | ColumnhwXdslPMLCurr1DaySraUpShiftEvent | read-only | current | This parameter is a count of sra up-shift event occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.61 | ColumnhwXdslPMLEverBeforeDisorderLeavingEvent | read-only | current | This parameter is a count of disorder leaving event occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.62 | ColumnhwXdslPMLEverBeforeLof | read-only | current | This parameter is a count of loss of frame failure occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.63 | ColumnhwXdslPMLEverBeforeLos | read-only | current | This parameter is a count of loss of signal failure occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.64 | ColumnhwXdslPMLEverBeforeLop | read-only | current | This parameter is a count of loss of power failure occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.65 | ColumnhwXdslPMLEverBeforeLom | read-only | current | This parameter is a count of loss of margin failure occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.66 | ColumnhwXdslPMLCurr15MDisorderLeavingEvent | read-only | current | This parameter is a count of disorder leaving event occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.67 | ColumnhwXdslPMLCurr1DayDisorderLeavingEvent | read-only | current | This parameter is a count of disorder leaving event occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.68 | ColumnhwXdslPMLCurr15MLof | read-only | current | This parameter is a count of loss of frame failure occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.69 | ColumnhwXdslPMLCurr15MLos | read-only | current | This parameter is a count of loss of signal failure occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.70 | ColumnhwXdslPMLCurr15MLop | read-only | current | This parameter is a count of loss of power failure occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.71 | ColumnhwXdslPMLCurr15MLom | read-only | current | This parameter is a count of loss of margin failure occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.72 | ColumnhwXdslPMLCurr1DayLof | read-only | current | This parameter is a count of loss of frame failure occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.73 | ColumnhwXdslPMLCurr1DayLos | read-only | current | This parameter is a count of loss of signal failure occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.74 | ColumnhwXdslPMLCurr1DayLop | read-only | current | This parameter is a count of loss of power failure occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.75 | ColumnhwXdslPMLCurr1DayLom | read-only | current | This parameter is a count of loss of margin failure occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.76 | ColumnhwXdslPMLCurr15MLors | read-only | current | This parameter is a count of LOR second occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.77 | ColumnhwXdslPMLCurr15MLor | read-only | current | This parameter is a count of loss of RMC failure occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.78 | ColumnhwXdslPMLCurr15MRpaSuccess | read-only | current | This parameter is a count of the successful RPA primitives occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.79 | ColumnhwXdslPMLCurr1DayLors | read-only | current | This parameter is a count of LOR second occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.80 | ColumnhwXdslPMLCurr1DayLor | read-only | current | This parameter is a count of loss of RMC failure occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.81 | ColumnhwXdslPMLCurr1DayRpaSuccess | read-only | current | This parameter is a count of the successful RPA primitives occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.82 | ColumnhwXdslPMLEverBeforeLors | read-only | current | This parameter is a count of LOR second occurring on the line during ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.83 | ColumnhwXdslPMLEverBeforeLor | read-only | current | This parameter is a count of loss of RMC failure occurring on the line during ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.84 | ColumnhwXdslPMLEverBeforeRpaSuccess | read-only | current | This parameter is a count of the successful RPA primitives occurring on the line during ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.85 | ColumnhwXdslPMLCurr15MBitswapSuccess | read-only | current | This parameter is a count of the successful bit swap primitives occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.86 | ColumnhwXdslPMLCurr15MTigaSuccess | read-only | current | This parameter is a count of the successful TIGA primitives occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.87 | ColumnhwXdslPMLCurr1DayBitswapSuccess | read-only | current | This parameter is a count of the successful bit swap primitives occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.88 | ColumnhwXdslPMLCurr1DayTigaSuccess | read-only | current | This parameter is a count of the successful TIGA primitives occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.89 | ColumnhwXdslPMLEverBeforeBitswapSuccess | read-only | current | This parameter is a count of the successful bit swap primitives occurring on the line during ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.1.1.90 | ColumnhwXdslPMLEverBeforeTigaSuccess | read-only | current | This parameter is a count of the successful TIGA primitives occurring on the line during ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2 | TablehwXdslPMLineCurrInitTable | not-accessible | current | The table hwXdslPMLineCurrInitTable contains current initialization counters of XDSL line. The indexes of this table are an interface index where the interface… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1 | RowhwXdslPMLineCurrInitEntry | not-accessible | current | The table hwXdslPMLineCurrInitTable contains current initialization counters of XDSL line. The indexes of this entry are an interface index where the interface… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.1 | ColumnhwXdslPMLCurrInit15MTimeElapsed | read-only | current | Total elapsed seconds in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.2 | ColumnhwXdslPMLCurrInit15MFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.3 | ColumnhwXdslPMLCurrInit15MFailedFullInits | read-only | current | Count of failed full initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.4 | ColumnhwXdslPMLCurrInit15MShortInits | read-only | current | Count of short initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.5 | ColumnhwXdslPMLCurrInit15MFailedShortInits | read-only | current | Count of failed short initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.6 | ColumnhwXdslPMLCurrInit1DayTimeElapsed | read-only | current | Total elapsed seconds in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.7 | ColumnhwXdslPMLCurrInit1DayFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.8 | ColumnhwXdslPMLCurrInit1DayFailedFullInits | read-only | current | Count of failed full initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.9 | ColumnhwXdslPMLCurrInit1DayShortInits | read-only | current | Count of short initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.10 | ColumnhwXdslPMLCurrInit1DayFailedShortInits | read-only | current | Count of failed short initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.11 | ColumnhwXdslPMLInitEverBeforeFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) since agent reset. Huawei defined. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.12 | ColumnhwXdslPMLInitEverBeforeFailedFullInits | read-only | current | Count of failed full initializations on the line since agent reset. Huawei defined. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.13 | ColumnhwXdslPMLInitEverBeforeShortInits | read-only | current | Count of short initializations attempted on the line (successful and failed) since agent reset. Huawei defined. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.14 | ColumnhwXdslPMLInitEverBeforeFailedShortInits | read-only | current | Count of failed short initializations on the line since agent reset. Huawei defined. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.15 | ColumnhwXdslPMLineCurrInit15MStartTime | read-only | current | Start time of the current initializations 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.16 | ColumnhwXdslPMLineCurrInit1DayStartTime | read-only | current | Start time of the current initializations 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.17 | ColumnhwXdslPMLineCurrInit15MAbnormalReInit | read-only | current | Count of abnormal re-init on the line during this interval. Huawei defined. The invalid value is 4294967295. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.18 | ColumnhwXdslPMLineCurrInit1DayAbnormalReInit | read-only | current | Count of abnormal re-init on the line during this interval. Huawei defined. The invalid value is 4294967295. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.2.1.19 | ColumnhwXdslPMLineCurrInitEverBeforeAbnormalReInit | read-only | current | Count of abnormal re-init on the line since agent reset. Huawei defined. The invalid value is 4294967295. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3 | TablehwXdslPMLineHist15MinTable | not-accessible | current | The table hwXdslPMLineHist15MinTable contains PM line history for 15min intervals of XDSL line. The indexes of this table are an interface index where the inte… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1 | RowhwXdslPMLineHist15MinEntry | not-accessible | current | The table hwXdslPMLineHist15MinTable contains PM line history for 15min intervals of XDSL line. The indexes of this entry are an interface index where the inte… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.1 | ColumnhwXdslPMLHist15MUnit | not-accessible | current | The termination unit XTUC{1} or XTUR{2}. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.2 | ColumnhwXdslPMLHist15MInterval | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.3 | ColumnhwXdslPMLHist15MMonitoredTime | read-only | current | Total seconds monitored in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.4 | ColumnhwXdslPMLHist15MFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibite… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.5 | ColumnhwXdslPMLHist15MEs | read-only | current | Count of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.6 | ColumnhwXdslPMLHist15MSes | read-only | current | Count of seconds during this interval that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.7 | ColumnhwXdslPMLHist15MLoss | read-only | current | Count of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.8 | ColumnhwXdslPMLHist15MUas | read-only | current | Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the o… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.9 | ColumnhwXdslPMLHist15MValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.10 | ColumnhwXdslPMLHist15MLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.11 | ColumnhwXdslPMLHist15MLols | read-only | current | Count of seconds in the interval when there was Loss of Link. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.12 | ColumnhwXdslPMLHist15MLops | read-only | current | Count of seconds in the interval when there was Loss of Power. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.13 | ColumnhwXdslPMLHist15MSosSuccess | read-only | current | If the line is activated as G9701 of hwXdslLineStatusXtuTransSys, the parameter is count of the total number of successful FRA procedures initiated in the inte… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.14 | ColumnhwXdslPMLHist15MInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line over the 15 minutes accumulation period. Each INMAINPEQ needs 4 bytes, Each four by… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.15 | ColumnhwXdslPMLHist15MInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.16 | ColumnhwXdslPMLHist15MInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line over the 15 minutes accumulation period. Each INMAIAT needs 4 bytes. Each four bytes,… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.17 | ColumnhwXdslPMLHist15MStartTime | read-only | current | Start time of the historical 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.18 | ColumnhwXdslPMLHist15MLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 15 min… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.19 | ColumnhwXdslPMLHist15MEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 15 minutes accumulation p… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.20 | ColumnhwXdslPMLHist15MMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minute… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.21 | ColumnhwXdslPMLHist15MSraDownShiftEvent | read-only | current | This parameter is a count of sra down-shift event occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.22 | ColumnhwXdslPMLHist15MSraUpShiftEvent | read-only | current | This parameter is a count of sra up-shift event occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.23 | ColumnhwXdslPMLHist15MDisorderLeavingEvent | read-only | current | This parameter is a count of disorder leaving event occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.24 | ColumnhwXdslPMLHist15MLof | read-only | current | This parameter is a count of loss of frame failure occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.25 | ColumnhwXdslPMLHist15MLos | read-only | current | This parameter is a count of loss of signal failure occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.26 | ColumnhwXdslPMLHist15MLop | read-only | current | This parameter is a count of loss of power failure occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.27 | ColumnhwXdslPMLHist15MLom | read-only | current | This parameter is a count of loss of margin failure occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.28 | ColumnhwXdslPMLineHist15MLors | read-only | current | This parameter is a count of LOR second occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.29 | ColumnhwXdslPMLineHist15MLor | read-only | current | This parameter is a count of loss of RMC failure occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.30 | ColumnhwXdslPMLineHist15MRpaSuccess | read-only | current | This parameter is a count of the successful RPA primitives occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.31 | ColumnhwXdslPMLineHist15MBitswapSuccess | read-only | current | This parameter is a count of the successful Bitswap primitives occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.3.1.32 | ColumnhwXdslPMLineHist15MTigaSuccess | read-only | current | This parameter is a count of the successful TIGA primitives occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4 | TablehwXdslPMLineHist1DayTable | not-accessible | current | The table hwXdslPMLineHist1DayTable contains PM line history for 24 hours intervals of XDSL line. The indexes of this table are an interface index where the in… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1 | RowhwXdslPMLineHist1DayEntry | not-accessible | current | The table hwXdslPMLineHist1DayTable contains PM line history for 24 hours intervals of XDSL line. The indexes of this entry are an interface index where the in… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.1 | ColumnhwXdslPMLHist1DUnit | not-accessible | current | The termination unit. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.2 | ColumnhwXdslPMLHist1DInterval | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.3 | ColumnhwXdslPMLHist1DMonitoredTime | read-only | current | Total seconds monitored in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.4 | ColumnhwXdslPMLHist1DFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibite… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.5 | ColumnhwXdslPMLHist1DEs | read-only | current | Count of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.6 | ColumnhwXdslPMLHist1DSes | read-only | current | Count of seconds during this interval that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >> 1 OR LPR >= 1 x… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.7 | ColumnhwXdslPMLHist1DLoss | read-only | current | Count of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.8 | ColumnhwXdslPMLHist1DUas | read-only | current | Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the o… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.9 | ColumnhwXdslPMLHist1DValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.10 | ColumnhwXdslPMLHist1DLofs | read-only | current | Count of seconds during this interval that there was Loss of Framing. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.11 | ColumnhwXdslPMLHist1DLols | read-only | current | Count of seconds during this interval that there was Loss of Link. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.12 | ColumnhwXdslPMLHist1DLops | read-only | current | Count of seconds during this interval that there was Loss of Power. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.13 | ColumnhwXdslPMLHist1DSosSuccess | read-only | current | If the line is activated as G9701 of hwXdslLineStatusXtuTransSys, the parameter is count of the total number of successful FRA procedures initiated during this… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.14 | ColumnhwXdslPMLHist1DInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line over the 24 hours accumulation period. Each INMAINPEQ needs 4 bytes, Each four byte… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.15 | ColumnhwXdslPMLHist1DInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.16 | ColumnhwXdslPMLHist1DInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line over the 24 hours accumulation period. Each INMAIAT needs 4 bytes. Each four bytes, a… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.17 | ColumnhwXdslPMLHist1DStartTime | read-only | current | Start time of the historical 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.18 | ColumnhwXdslPMLHist1DLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 24 hou… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.19 | ColumnhwXdslPMLHist1DEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 24 hours accumulation per… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.20 | ColumnhwXdslPMLHist1DMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 24 hours … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.21 | ColumnhwXdslPMLHist1DSraDownShiftEvent | read-only | current | This parameter is a count of sra down-shift event occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.22 | ColumnhwXdslPMLHist1DSraUpShiftEvent | read-only | current | This parameter is a count of sra up-shift event occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.23 | ColumnhwXdslPMLHist1DDisorderLeavingEvent | read-only | current | This parameter is a count of disorder leaving event occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.24 | ColumnhwXdslPMLHist1DLof | read-only | current | This parameter is a count of loss of frame failure occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.25 | ColumnhwXdslPMLHist1DLos | read-only | current | This parameter is a count of loss of signal failure occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.26 | ColumnhwXdslPMLHist1DLop | read-only | current | This parameter is a count of loss of power failure occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.27 | ColumnhwXdslPMLHist1DLom | read-only | current | This parameter is a count of loss of margin failure occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.28 | ColumnhwXdslPMLineHist1DayLors | read-only | current | This parameter is a count of LOR second occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.29 | ColumnhwXdslPMLineHist1DayLor | read-only | current | This parameter is a count of loss of RMC failure occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.30 | ColumnhwXdslPMLineHist1DayRpaSuccess | read-only | current | This parameter is a count of the successful RPA primitives occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.31 | ColumnhwXdslPMLineHist1DayBitswapSuccess | read-only | current | This parameter is a count of the successful Bitswap primitives occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.4.1.32 | ColumnhwXdslPMLineHist1DayTigaSuccess | read-only | current | This parameter is a count of the successful TIGA primitives occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.5 | TablehwXdslPMLineInitHist15MinTable | not-accessible | current | The table hwXdslPMLineInitHist15MinTable contains PM line initialization history for 15 minutes intervals of XDSL line. The indexes of this table are an interf… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.5.1 | RowhwXdslPMLineInitHist15MinEntry | not-accessible | current | The table hwXdslPMLineInitHist15MinTable contains PM line initialization history for 15 minutes intervals of XDSL line. The indexes of this entry are an interf… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.5.1.1 | ColumnhwXdslPMLHistInit15MInterval | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.5.1.2 | ColumnhwXdslPMLHistInit15MMonitoredTime | read-only | current | Total seconds monitored in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.5.1.3 | ColumnhwXdslPMLHistInit15MFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.5.1.4 | ColumnhwXdslPMLHistInit15MFailedFullInits | read-only | current | Count of failed full initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.5.1.5 | ColumnhwXdslPMLHistInit15MShortInits | read-only | current | Count of short initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.5.1.6 | ColumnhwXdslPMLHistInit15MFailedShortInits | read-only | current | Count of failed short initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.5.1.7 | ColumnhwXdslPMLHistInit15MValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.5.1.8 | ColumnhwXdslPMLHistInit15MStartTime | read-only | current | Start time of the historical initializations 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.5.1.9 | ColumnhwXdslPMLHistInit15MAbnormalReInit | read-only | current | Count of abnormal re-init on the line during this interval. The invalid value is 4294967295. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.6 | TablehwXdslPMLineInitHist1DayTable | not-accessible | current | The table hwXdslPMLineInitHist1DayTable contains PM line initialization history for 24 hours intervals of XDSL line. The indexes of this table are an interface… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.6.1 | RowhwXdslPMLineInitHist1DayEntry | not-accessible | current | The table hwXdslPMLineInitHist1DayTable contains PM line initialization history for 24 hours intervals of XDSL line. The indexes of this entry are an interface… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.6.1.1 | ColumnhwXdslPMLHistinit1DInterval | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.6.1.2 | ColumnhwXdslPMLHistinit1DMonitoredTime | read-only | current | Total seconds monitored in this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.6.1.3 | ColumnhwXdslPMLHistinit1DFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.6.1.4 | ColumnhwXdslPMLHistinit1DFailedFullInits | read-only | current | Count of failed full initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.6.1.5 | ColumnhwXdslPMLHistinit1DShortInits | read-only | current | Count of short initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.6.1.6 | ColumnhwXdslPMLHistinit1DFailedShortInits | read-only | current | Count of failed short initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.6.1.7 | ColumnhwXdslPMLHistinit1DValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.6.1.8 | ColumnhwXdslPMLHistinit1DStartTime | read-only | current | Start time of the historical initializations 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.6.1.9 | ColumnhwXdslPMLHistinit1DAbnormalReInit | read-only | current | Count of abnormal re-init on the line during this interval. The invalid value is 4294967295. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7 | TablehwOntXdslPMLineCurrTable | not-accessible | current | The table hwOntXdslPMLineCurrTable contains current Performance Monitoring results of the ONT XDSL port line. The indexes of this table are ifIndex, hwOntObjec… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1 | RowhwOntXdslPMLineCurrEntry | not-accessible | current | The table hwOntXdslPMLineCurrTable contains current Performance Monitoring results of the ONT XDSL port line. The indexes of this entry are ifIndex, hwOntObjec… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.1 | ColumnhwOntXdslPMLCurrUnit | not-accessible | current | The termination unit XTUC{1} or XTUR{2}. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.2 | ColumnhwOntXdslPMLCurrValidIntervals | read-only | current | Valid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.3 | ColumnhwOntXdslPMLCurrInvalidIntervals | read-only | current | Invalid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.4 | ColumnhwOntXdslPMLCurr15MTimeElapsed | read-only | current | Total elapsed seconds in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.5 | ColumnhwOntXdslPMLCurr15MFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibite… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.6 | ColumnhwOntXdslPMLCurr15MEs | read-only | current | Count of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1 xTU-R: F… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.7 | ColumnhwOntXdslPMLCurr15MSes | read-only | current | Count of seconds during this interval that there was: xTU-C: If G.998.4 is supported and retransmission is enabled in the near-end received direction, a SES is… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.8 | ColumnhwOntXdslPMLCurr15MLoss | read-only | current | Count of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.9 | ColumnhwOntXdslPMLCurr15MUas | read-only | current | Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely-errored seconds, and ends at the on… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.10 | ColumnhwOntXdslPMLCurr1DayValidIntervals | read-only | current | Valid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.11 | ColumnhwOntXdslPMLCurr1DayInvalidIntervals | read-only | current | Invalid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.12 | ColumnhwOntXdslPMLCurr1DayTimeElapsed | read-only | current | Total elapsed seconds in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.13 | ColumnhwOntXdslPMLCurr1DayFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibite… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.14 | ColumnhwOntXdslPMLCurr1DayEs | read-only | current | Count of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.15 | ColumnhwOntXdslPMLCurr1DaySes | read-only | current | Count of seconds during this interval that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.16 | ColumnhwOntXdslPMLCurr1DayLoss | read-only | current | Count of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.17 | ColumnhwOntXdslPMLCurr1DayUas | read-only | current | Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the o… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.18 | ColumnhwOntXdslPMLEverBeforeFecs | read-only | current | Count of seconds since agent reset that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited d… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.19 | ColumnhwOntXdslPMLEverBeforeEs | read-only | current | Count of seconds since agent reset that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: FEB… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.20 | ColumnhwOntXdslPMLEverBeforeSes | read-only | current | Count of seconds since agent reset that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.21 | ColumnhwOntXdslPMLEverBeforeLoss | read-only | current | Count of seconds since agent reset that there was LOS (or LOS-FE for xTU-R). Huawei defined. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.22 | ColumnhwOntXdslPMLEverBeforeUas | read-only | current | Count of seconds in Unavailability State since agent reset. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the onse… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.23 | ColumnhwOntXdslPMLCurr15MLofs | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Framing. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.24 | ColumnhwOntXdslPMLCurr15MLols | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Link. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.25 | ColumnhwOntXdslPMLCurr15MLops | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Power. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.26 | ColumnhwOntXdslPMLCurr1DayLofs | read-only | current | Count of the number of seconds when there was Loss of Framing during the current day. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.27 | ColumnhwOntXdslPMLCurr1DayLols | read-only | current | Count of the number of seconds when there was Loss of Link during the current day. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.28 | ColumnhwOntXdslPMLCurr1DayLops | read-only | current | Count of the number of seconds when there was Loss of Power during the current day. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.29 | ColumnhwOntXdslPMLEverBeforeLofs | read-only | current | Count of the number of seconds when there was Loss of Framing since agent reset. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.30 | ColumnhwOntXdslPMLEverBeforeLols | read-only | current | Count of the number of seconds when there was Loss of Link since agent reset. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.31 | ColumnhwOntXdslPMLEverBeforeLops | read-only | current | Count of the number of seconds when there was Loss of Power since agent reset. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.32 | ColumnhwOntXdslPMLCurr15MSosSuccess | read-only | current | Count of the total number of successful SOS procedures initiated in the current 15 minute. Unit: times |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.33 | ColumnhwOntXdslPMLCurr1DaySosSuccess | read-only | current | Count of the total number of successful SOS procedures initiated during the current day. Unit: times |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.34 | ColumnhwOntXdslPMLEverBeforeSosSuccess | read-only | current | Count of the total number of successful SOS procedures initiated since agent reset. Unit: times |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.35 | ColumnhwOntXdslPMLCurr15MInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.36 | ColumnhwOntXdslPMLCurr15MInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.37 | ColumnhwOntXdslPMLCurr15MInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line during current 15 minutes. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.38 | ColumnhwOntXdslPMLCurr1DayInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.39 | ColumnhwOntXdslPMLCurr1DayInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.40 | ColumnhwOntXdslPMLCurr1DayInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line during current 1 day. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.41 | ColumnhwOntXdslPMLEverBeforeInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.42 | ColumnhwOntXdslPMLEverBeforeInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.43 | ColumnhwOntXdslPMLEverBeforeInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line ever before. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.44 | ColumnhwOntXdslPMLineCurr15MStartTime | read-only | current | Start time of the current 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.45 | ColumnhwOntXdslPMLineCurr1DayStartTime | read-only | current | Start time of the current 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.46 | ColumnhwOntXdslPMLCurr15MLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 15 min… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.47 | ColumnhwOntXdslPMLCurr15MEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 15 minutes accumulation p… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.48 | ColumnhwOntXdslPMLCurr15MMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minute… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.49 | ColumnhwOntXdslPMLCurr1DayLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 24 hou… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.50 | ColumnhwOntXdslPMLCurr1DayEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 24 hours accumulation per… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.51 | ColumnhwOntXdslPMLCurr1DayMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 24 hours … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.52 | ColumnhwOntXdslPMLEverBeforeLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed ever before. Cu… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.53 | ColumnhwOntXdslPMLEverBeforeEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed ever before. Currently, this leaf … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.7.1.54 | ColumnhwOntXdslPMLEverBeforeMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed ever before. Curre… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8 | TablehwOntXdslPMLineCurrInitTable | not-accessible | current | The table hwOntXdslPMLineCurrInitTable contains current initialization counters of the ONT XDSL port line. The indexes of this table are ifIndex, hwOntObjectIn… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1 | RowhwOntXdslPMLineCurrInitEntry | not-accessible | current | The table hwOntXdslPMLineCurrInitTable contains current initialization counters of the ONT XDSL port line. The indexes of this entry are ifIndex, hwOntObjectIn… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.1 | ColumnhwOntXdslPMLCurrInit15MTimeElapsed | read-only | current | Total elapsed seconds in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.2 | ColumnhwOntXdslPMLCurrInit15MFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.3 | ColumnhwOntXdslPMLCurrInit15MFailedFullInits | read-only | current | Count of failed full initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.4 | ColumnhwOntXdslPMLCurrInit15MShortInits | read-only | current | Count of short initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.5 | ColumnhwOntXdslPMLCurrInit15MFailedShortInits | read-only | current | Count of failed short initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.6 | ColumnhwOntXdslPMLCurrInit1DayTimeElapsed | read-only | current | Total elapsed seconds in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.7 | ColumnhwOntXdslPMLCurrInit1DayFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.8 | ColumnhwOntXdslPMLCurrInit1DayFailedFullInits | read-only | current | Count of failed full initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.9 | ColumnhwOntXdslPMLCurrInit1DayShortInits | read-only | current | Count of short initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.10 | ColumnhwOntXdslPMLCurrInit1DayFailedShortInits | read-only | current | Count of failed short initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.11 | ColumnhwOntXdslPMLInitEverBeforeFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) since agent reset. Huawei defined. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.12 | ColumnhwOntXdslPMLInitEverBeforeFailedFullInits | read-only | current | Count of failed full initializations on the line since agent reset. Huawei defined. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.13 | ColumnhwOntXdslPMLInitEverBeforeShortInits | read-only | current | Count of short initializations attempted on the line (successful and failed) since agent reset. Huawei defined. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.14 | ColumnhwOntXdslPMLInitEverBeforeFailedShortInits | read-only | current | Count of failed short initializations on the line since agent reset. Huawei defined. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.15 | ColumnhwOntXdslPMLineCurrInit15MStartTime | read-only | current | Start time of the current initializations 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.8.1.16 | ColumnhwOntXdslPMLineCurrInit1DayStartTime | read-only | current | Start time of the current initializations 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9 | TablehwOntXdslPMLineHist15MinTable | not-accessible | current | The table hwOntXdslPMLineHist15MinTable contains PM line history for 15min intervals of the ONT port XDSL line. The indexes of this table are ifIndex, hwOntObj… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1 | RowhwOntXdslPMLineHist15MinEntry | not-accessible | current | The table hwOntXdslPMLineHist15MinTable contains PM line history for 15min intervals of the ONT port XDSL line. The indexes of this entry are ifIndex, hwOntObj… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.1 | ColumnhwOntXdslPMLHist15MUnit | not-accessible | current | The termination unit XTUC{1} or XTUR{2}. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.2 | ColumnhwOntXdslPMLHist15MInterval | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.3 | ColumnhwOntXdslPMLHist15MMonitoredTime | read-only | current | Total seconds monitored in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.4 | ColumnhwOntXdslPMLHist15MFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibite… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.5 | ColumnhwOntXdslPMLHist15MEs | read-only | current | Count of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.6 | ColumnhwOntXdslPMLHist15MSes | read-only | current | Count of seconds during this interval that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.7 | ColumnhwOntXdslPMLHist15MLoss | read-only | current | Count of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.8 | ColumnhwOntXdslPMLHist15MUas | read-only | current | Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the o… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.9 | ColumnhwOntXdslPMLHist15MValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.10 | ColumnhwOntXdslPMLHist15MLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.11 | ColumnhwOntXdslPMLHist15MLols | read-only | current | Count of seconds in the interval when there was Loss of Link. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.12 | ColumnhwOntXdslPMLHist15MLops | read-only | current | Count of seconds in the interval when there was Loss of Power. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.13 | ColumnhwOntXdslPMLHist15MSosSuccess | read-only | current | Count of the total number of successful SOS procedures initiated in the interval. Unit: times |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.14 | ColumnhwOntXdslPMLHist15MInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.15 | ColumnhwOntXdslPMLHist15MInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.16 | ColumnhwOntXdslPMLHist15MInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line over the 15 minutes accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.17 | ColumnhwOntXdslPMLHist15MStartTime | read-only | current | Start time of the historical 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.18 | ColumnhwOntXdslPMLHist15MLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 15 min… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.19 | ColumnhwOntXdslPMLHist15MEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 15 minutes accumulation p… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.9.1.20 | ColumnhwOntXdslPMLHist15MMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 15 minute… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10 | TablehwOntXdslPMLineHist1DayTable | not-accessible | current | The table hwOntXdslPMLineHist1DayTable contains PM line history for 24 hours intervals of the ONT XDSL port line. The indexes of this table are ifIndex, hwOntO… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1 | RowhwOntXdslPMLineHist1DayEntry | not-accessible | current | The table hwOntXdslPMLineHist1DayTable contains PM line history for 24 hours intervals of the ONT XDSL port line. The indexes of this entry are ifIndex, hwOntO… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.1 | ColumnhwOntXdslPMLHist1DUnit | not-accessible | current | The termination unit. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.2 | ColumnhwOntXdslPMLHist1DInterval | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.3 | ColumnhwOntXdslPMLHist1DMonitoredTime | read-only | current | Total seconds monitored in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.4 | ColumnhwOntXdslPMLHist1DFecs | read-only | current | Count of seconds during this interval that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibite… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.5 | ColumnhwOntXdslPMLHist1DEs | read-only | current | Count of seconds during this interval that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >= 1 OR LPR >= 1 xTU-R: … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.6 | ColumnhwOntXdslPMLHist1DSes | read-only | current | Count of seconds during this interval that there was: xTU-C: (CRC-8 summed over all bearer channels) >= 18 OR LOS >= 1 OR SEF >> 1 OR LPR >= 1 x… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.7 | ColumnhwOntXdslPMLHist1DLoss | read-only | current | Count of seconds during this interval that there was LOS (or LOS-FE for xTU-R). Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.8 | ColumnhwOntXdslPMLHist1DUas | read-only | current | Count of seconds in Unavailability State during this interval. Unavailability begins at the onset of 10 contiguous severely -errored seconds, and ends at the o… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.9 | ColumnhwOntXdslPMLHist1DValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.10 | ColumnhwOntXdslPMLHist1DLofs | read-only | current | Count of seconds during this interval that there was Loss of Framing. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.11 | ColumnhwOntXdslPMLHist1DLols | read-only | current | Count of seconds during this interval that there was Loss of Link. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.12 | ColumnhwOntXdslPMLHist1DLops | read-only | current | Count of seconds during this interval that there was Loss of Power. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.13 | ColumnhwOntXdslPMLHist1DSosSuccess | read-only | current | Count of the total number of successful SOS procedures initiated during this interval. Unit: times |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.14 | ColumnhwOntXdslPMLHist1DInmainpeq | read-only | current | This parameter is a count of the INMAINPEQi anomalies occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.15 | ColumnhwOntXdslPMLHist1DInmame | read-only | current | This parameter is a count of the INMAME anomalies occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.16 | ColumnhwOntXdslPMLHist1DInmaiat | read-only | current | This parameter is a count of the INMAIATi anomalies occurring on the line over the 24 hours accumulation period. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.17 | ColumnhwOntXdslPMLHist1DStartTime | read-only | current | Start time of the historical 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.18 | ColumnhwOntXdslPMLHist1DLeftrs | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the seconds with a near-end leftr defect present observed over the 24 hou… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.19 | ColumnhwOntXdslPMLHist1DEfb | read-only | current | If retransmission is used in a given transmit direction, this parameter is a count of the number of error-free bits observed over the 24 hours accumulation per… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.10.1.20 | ColumnhwOntXdslPMLHist1DMinEftr | read-only | current | If retransmission is used in a given transmit direction, this parameter reports the minimum of the EFTR(Error-free throughput rate) observed over the 24 hours … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.11 | TablehwOntXdslPMLineInitHist15MinTable | not-accessible | current | The table hwOntXdslPMLineInitHist15MinTable contains PM line initialization history for 15 minutes intervals of the ONT XDSL port line. The indexes of this tab… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.11.1 | RowhwOntXdslPMLineInitHist15MinEntry | not-accessible | current | The table hwOntXdslPMLineInitHist15MinTable contains PM line initialization history for 15 minutes intervals of the ONT XDSL port line. The indexes of this ent… |
| 1.3.6.1.4.1.2011.6.115.1.4.1.11.1.1 | ColumnhwOntXdslPMLHistInit15MInterval | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.11.1.2 | ColumnhwOntXdslPMLHistInit15MMonitoredTime | read-only | current | Total seconds monitored in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.1.11.1.3 | ColumnhwOntXdslPMLHistInit15MFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.11.1.4 | ColumnhwOntXdslPMLHistInit15MFailedFullInits | read-only | current | Count of failed full initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.11.1.5 | ColumnhwOntXdslPMLHistInit15MShortInits | read-only | current | Count of short initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.11.1.6 | ColumnhwOntXdslPMLHistInit15MFailedShortInits | read-only | current | Count of failed short initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.11.1.7 | ColumnhwOntXdslPMLHistInit15MValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.11.1.8 | ColumnhwOntXdslPMLHistInit15MStartTime | read-only | current | Start time of the historical initializations 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.12 | TablehwOntXdslPMLineInitHist1DayTable | not-accessible | current | The table hwOntXdslPMLineInitHist1DayTable contains PM line initialization history for 24 hours intervals of the ONT XDSL port line. The indexes of this table … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.12.1 | RowhwOntXdslPMLineInitHist1DayEntry | not-accessible | current | The table hwOntXdslPMLineInitHist1DayTable contains PM line initialization history for 24 hours intervals of the ONT XDSL port line. The indexes of this entry … |
| 1.3.6.1.4.1.2011.6.115.1.4.1.12.1.1 | ColumnhwOntXdslPMLHistinit1DInterval | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.12.1.2 | ColumnhwOntXdslPMLHistinit1DMonitoredTime | read-only | current | Total seconds monitored in this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.12.1.3 | ColumnhwOntXdslPMLHistinit1DFullInits | read-only | current | Count of full initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.12.1.4 | ColumnhwOntXdslPMLHistinit1DFailedFullInits | read-only | current | Count of failed full initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.12.1.5 | ColumnhwOntXdslPMLHistinit1DShortInits | read-only | current | Count of short initializations attempted on the line (successful and failed) during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.12.1.6 | ColumnhwOntXdslPMLHistinit1DFailedShortInits | read-only | current | Count of failed short initializations on the line during this interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.12.1.7 | ColumnhwOntXdslPMLHistinit1DValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.2011.6.115.1.4.1.12.1.8 | ColumnhwOntXdslPMLHistinit1DStartTime | read-only | current | Start time of the historical initializations 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.2 | NodehwXdslPMChannel | |||
| 1.3.6.1.4.1.2011.6.115.1.4.2.1 | TablehwXdslPMChCurrTable | not-accessible | current | The table hwXdslPMChCurrTable contains current Performance Monitoring results of XDSL channel. The indexes of this table are an interface index where the inter… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1 | RowhwXdslPMChCurrEntry | not-accessible | current | The table hwXdslPMChCurrTable contains current Performance Monitoring results of XDSL channel. The indexes of this entry are an interface index where the inter… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.1 | ColumnhwXdslPMChCurrUnit | not-accessible | current | The termination unit. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.2 | ColumnhwXdslPMChCurrValidIntervals | read-only | current | Valid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.3 | ColumnhwXdslPMChCurrInvalidIntervals | read-only | current | Invalid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.4 | ColumnhwXdslPMChCurr15MTimeElapsed | read-only | current | Total elapsed seconds in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.5 | ColumnhwXdslPMChCurr15MCodingViolations | read-only | current | Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.6 | ColumnhwXdslPMChCurr15MCorrectedBlocks | read-only | current | Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If … |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.7 | ColumnhwXdslPMChCurr1DayValidIntervals | read-only | current | Valid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.8 | ColumnhwXdslPMChCurr1DayInvalidIntervals | read-only | current | Invalid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.9 | ColumnhwXdslPMChCurr1DayTimeElapsed | read-only | current | Total elapsed seconds in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.10 | ColumnhwXdslPMChCurr1DayCodingViolations | read-only | current | Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.11 | ColumnhwXdslPMChCurr1DayCorrectedBlocks | read-only | current | Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If … |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.12 | ColumnhwXdslPMChEverBeforeCodingViolations | read-only | current | Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If the CRC is applied over… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.13 | ColumnhwXdslPMChEverBeforeCorrectedBlocks | read-only | current | Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If th… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.14 | ColumnhwXdslPMChCurr15MEncodedBlocks | read-only | current | Count of all encoded blocks received on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.15 | ColumnhwXdslPMChCurr15MUncorrectableBlocks | read-only | current | Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.16 | ColumnhwXdslPMChCurr1DayEncodedBlocks | read-only | current | Count of all encoded blocks received on this channel during the current day. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.17 | ColumnhwXdslPMChCurr1DayUncorrectableBlocks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during the current day. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.18 | ColumnhwXdslPMChEverBeforeEncodedBlocks | read-only | current | Count of all encoded blocks received on this channel since agent reset. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.19 | ColumnhwXdslPMChEverBeforeUncorrectableBlocks | read-only | current | Count of all blocks received with uncorrectable errors since agent reset. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.20 | ColumnhwXdslPMChCurr15MAtmCells | read-only | current | Count of Atm Cells received within the current 15 minute interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.21 | ColumnhwXdslPMChCurr15MPtmPackets | read-only | current | Count of Ptm Packet received within the current 15 minute interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.22 | ColumnhwXdslPMChCurr1DayAtmCells | read-only | current | Count of Atm Cells received during the current day. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.23 | ColumnhwXdslPMChCurr1DayPtmPackets | read-only | current | Count of Ptm Packets received during the current day. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.24 | ColumnhwXdslPMChEverBeforeAtmCells | read-only | current | Count of Atm Cells received since agent reset. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.25 | ColumnhwXdslPMChEverBeforePtmPackets | read-only | current | Count of Ptm Packets received since agent reset. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.26 | ColumnhwXdslPMChCurr15MRtxCW | read-only | current | Count of units request retransmission within the current 15 minute interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.27 | ColumnhwXdslPMChCurr15MRtxCorrectedCW | read-only | current | Count of units corrected by retransmission within the current 15 minute interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.28 | ColumnhwXdslPMChCurr15MRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission within the current 15 minute interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.29 | ColumnhwXdslPMChCurr1DayRtxCW | read-only | current | Count of units request retransmission during the current day. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.30 | ColumnhwXdslPMChCurr1DayRtxCorrectedCW | read-only | current | Count of units corrected by retransmission during the current day. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.31 | ColumnhwXdslPMChCurr1DayRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission during the current day. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.32 | ColumnhwXdslPMChEverBeforeRtxCW | read-only | current | Count of units request retransmission since agent reset. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.33 | ColumnhwXdslPMChEverBeforeRtxCorrectedCW | read-only | current | Count of units corrected by retransmission since agent reset. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.34 | ColumnhwXdslPMChEverBeforeRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission since agent reset. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.35 | ColumnhwXdslPMChCurr15MStartTime | read-only | current | Start time of the channel current 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.1.1.36 | ColumnhwXdslPMChCurr1DayStartTime | read-only | current | Start time of the channel current 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2 | TablehwXdslPMChHist15MinTable | not-accessible | current | The table hwXdslPMChHist15MinTable contains PM channel history for 15min intervals of XDSL channel. The indexes of this table are an interface index where the … |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1 | RowhwXdslPMChHist15MinEntry | not-accessible | current | The table hwXdslPMChHist15MinTable contains PM channel history for 15min intervals of XDSL channel. The indexes of this entry are an interface index where the … |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.1 | ColumnhwXdslPMChHist15MUnit | not-accessible | current | The termination unit. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.2 | ColumnhwXdslPMChHist15MInterval | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.3 | ColumnhwXdslPMChHist15MMonitoredTime | read-only | current | Total seconds monitored in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.4 | ColumnhwXdslPMChHist15MCodingViolations | read-only | current | Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.5 | ColumnhwXdslPMChHist15MCorrectedBlocks | read-only | current | Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If … |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.6 | ColumnhwXdslPMChHist15MValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.7 | ColumnhwXdslPMChHist15MEncodedBlocks | read-only | current | Count of all encoded blocks received on this channel during the interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.8 | ColumnhwXdslPMChHist15MUncorrectableBlocks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during the interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.9 | ColumnhwXdslPMChHist15MAtmCells | read-only | current | Count of Atm Cells received on this channel during the interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.10 | ColumnhwXdslPMChHist15MPtmPackets | read-only | current | Count of Ptm Packets received on this channel during the interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.11 | ColumnhwXdslPMChHist15MRtxCW | read-only | current | Count of units request retransmission during the serval 15 minute interval of history. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.12 | ColumnhwXdslPMChHist15MRtxCorrectedCW | read-only | current | Count of units corrected by retransmission during the serval 15 minute interval of history. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.13 | ColumnhwXdslPMChHist15MRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission during the serval 15 minute interval of history. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.2.1.14 | ColumnhwXdslPMChHist15MStartTime | read-only | current | Start time of the channel historical 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3 | TablehwXdslPMChHist1DTable | not-accessible | current | The table hwXdslPMChHist1DTable contains PM channel history for 1 day intervals of XDSL2. The indexes of this table are an interface index where the interface … |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1 | RowhwXdslPMChHist1DEntry | not-accessible | current | The table hwXdslPMChHist1DTable contains PM channel history for 1 day intervals of XDSL2. The indexes of this entry are an interface index where the interface … |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.1 | ColumnhwXdslPMChHist1DUnit | not-accessible | current | The termination unit. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.2 | ColumnhwXdslPMChHist1DInterval | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.3 | ColumnhwXdslPMChHist1DMonitoredTime | read-only | current | Total seconds monitored in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.4 | ColumnhwXdslPMChHist1DCodingViolations | read-only | current | Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.5 | ColumnhwXdslPMChHist1DCorrectedBlocks | read-only | current | Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If … |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.6 | ColumnhwXdslPMChHist1DValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.7 | ColumnhwXdslPMChHist1DEncodedBlocks | read-only | current | Count of all encoded blocks received on this channel during the interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.8 | ColumnhwXdslPMChHist1DUncorrectableBlocks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during the interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.9 | ColumnhwXdslPMChHist1DAtmCells | read-only | current | Count of Atm Cells received on this channel during the interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.10 | ColumnhwXdslPMChHist1DPtmPackets | read-only | current | Count of Ptm Packets received on this channel during the interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.11 | ColumnhwXdslPMChHist1DRtxCW | read-only | current | Count of units request retransmission within the serval one day interval of history. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.12 | ColumnhwXdslPMChHist1DRtxCorrectedCW | read-only | current | Count of units corrected by retransmission during the serval one day interval of history. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.13 | ColumnhwXdslPMChHist1DRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission during the serval one day interval of history. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.3.1.14 | ColumnhwXdslPMChHist1DStartTime | read-only | current | Start time of the channel historical 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.4 | TablehwXdslPMChChipStatTable | not-accessible | current | The table hwXdslPMChChipStatTable contains packets and CRC errors on chipset of upstream and downstream of XDSL channel. The indexes of this table are an inter… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.4.1 | RowhwXdslPMChChipStatEntry | not-accessible | current | The table hwXdslPMChChipStatTable contains packets and CRC errors on chipset of upstream and downstream of XDSL channel. The indexes of this entry are an inter… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.4.1.1 | ColumnhwXdslPMChChipstatUnit | not-accessible | current | The termination unit. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.4.1.2 | ColumnhwXdslPMChPktsDs | read-only | current | The number of downstream packets. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.4.1.3 | ColumnhwXdslPMChPktsUs | read-only | current | The number of upstream packets. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.4.1.4 | ColumnhwXdslPMChCrcErrsDs | read-only | current | The number of downstream CRC errors. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.4.1.5 | ColumnhwXdslPMChCrcErrsUs | read-only | current | The number of upstream CRC errors. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.4.1.6 | ColumnhwXdslPMChStatAdminStatus | read-write | current | Clear the number of packets transmitted and received, CRC errors upstream and downstream. Options: 1. reset(1) - reset statistic data |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5 | TablehwOntXdslPMChCurrTable | not-accessible | current | The table hwOntXdslPMChCurrTable contains current Performance Monitoring results of XDSL channel. The indexes of this table are ifIndex, hwOntObjectIndex, hwOn… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1 | RowhwOntXdslPMChCurrEntry | not-accessible | current | The table hwOntXdslPMChCurrTable contains current Performance Monitoring results of XDSL channel. The indexes of this entry are ifIndex, hwOntObjectIndex, hwOn… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.1 | ColumnhwOntXdslPMChCurrUnit | not-accessible | current | The termination unit xTU-C(1) or xTU-R(2). |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.2 | ColumnhwOntXdslPMChCurrValidIntervals | read-only | current | Valid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.3 | ColumnhwOntXdslPMChCurrInvalidIntervals | read-only | current | Invalid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.4 | ColumnhwOntXdslPMChCurr15MTimeElapsed | read-only | current | Total elapsed seconds in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.5 | ColumnhwOntXdslPMChCurr15MCodingViolations | read-only | current | Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.6 | ColumnhwOntXdslPMChCurr15MCorrectedBlocks | read-only | current | Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If … |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.7 | ColumnhwOntXdslPMChCurr1DayValidIntervals | read-only | current | Valid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.8 | ColumnhwOntXdslPMChCurr1DayInvalidIntervals | read-only | current | Invalid intervals. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.9 | ColumnhwOntXdslPMChCurr1DayTimeElapsed | read-only | current | Total elapsed seconds in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.10 | ColumnhwOntXdslPMChCurr1DayCodingViolations | read-only | current | Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.11 | ColumnhwOntXdslPMChCurr1DayCorrectedBlocks | read-only | current | Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If … |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.12 | ColumnhwOntXdslPMChEverBeforeCodingViolations | read-only | current | Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If the CRC is applied over… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.13 | ColumnhwOntXdslPMChEverBeforeCorrectedBlocks | read-only | current | Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel since agent reset. This parameter is inhibited during UAS or SES. If th… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.14 | ColumnhwOntXdslPMChCurr15MEncodedBlocks | read-only | current | Count of all encoded blocks received on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.15 | ColumnhwOntXdslPMChCurr15MUncorrectableBlocks | read-only | current | Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.16 | ColumnhwOntXdslPMChCurr1DayEncodedBlocks | read-only | current | Count of all encoded blocks received on this channel during the current day. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.17 | ColumnhwOntXdslPMChCurr1DayUncorrectableBlocks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during the current day. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.18 | ColumnhwOntXdslPMChEverBeforeEncodedBlocks | read-only | current | Count of all encoded blocks received on this channel since agent reset. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.19 | ColumnhwOntXdslPMChEverBeforeUncorrectableBlocks | read-only | current | Count of all blocks received with uncorrectable errors since agent reset. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.20 | ColumnhwOntXdslPMChCurr15MAtmCells | read-only | current | Count of Atm Cells received within the current 15 minute interval. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.21 | ColumnhwOntXdslPMChCurr15MPtmPackets | read-only | current | Count of Ptm Packet received within the current 15 minute interval. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.22 | ColumnhwOntXdslPMChCurr1DayAtmCells | read-only | current | Count of Atm Cells received during the current day. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.23 | ColumnhwOntXdslPMChCurr1DayPtmPackets | read-only | current | Count of Ptm Packets received during the current day. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.24 | ColumnhwOntXdslPMChEverBeforeAtmCells | read-only | current | Count of Atm Cells received since agent reset. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.25 | ColumnhwOntXdslPMChEverBeforePtmPackets | read-only | current | Count of Ptm Packets received since agent reset. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.26 | ColumnhwOntXdslPMChCurr15MRtxCW | read-only | current | Count of units request retransmission within the current 15 minute interval. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.27 | ColumnhwOntXdslPMChCurr15MRtxCorrectedCW | read-only | current | Count of units corrected by retransmission within the current 15 minute interval. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.28 | ColumnhwOntXdslPMChCurr15MRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission within the current 15 minute interval. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.29 | ColumnhwOntXdslPMChCurr1DayRtxCW | read-only | current | Count of units request retransmission during the current day. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.30 | ColumnhwOntXdslPMChCurr1DayRtxCorrectedCW | read-only | current | Count of units corrected by retransmission during the current day. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.31 | ColumnhwOntXdslPMChCurr1DayRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission during the current day. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.32 | ColumnhwOntXdslPMChEverBeforeRtxCW | read-only | current | Count of units request retransmission since agent reset. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.33 | ColumnhwOntXdslPMChEverBeforeRtxCorrectedCW | read-only | current | Count of units corrected by retransmission since agent reset. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.34 | ColumnhwOntXdslPMChEverBeforeRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission since agent reset. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.35 | ColumnhwOntXdslPMChCurr15MStartTime | read-only | current | Start time of the channel current 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.5.1.36 | ColumnhwOntXdslPMChCurr1DayStartTime | read-only | current | Start time of the channel current 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6 | TablehwOntXdslPMChHist15MinTable | not-accessible | current | The table hwOntXdslPMChHist15MinTable contains PM channel history for 15min intervals of XDSL channel. The indexes of this table are ifIndex, hwOntObjectIndex,… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1 | RowhwOntXdslPMChHist15MinEntry | not-accessible | current | The table hwOntXdslPMChHist15MinTable contains PM channel history for 15min intervals of XDSL channel. The indexes of this entry are ifIndex, hwOntObjectIndex,… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.1 | ColumnhwOntXdslPMChHist15MUnit | not-accessible | current | The termination unit xTU-C(1) or xTU-R(2). |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.2 | ColumnhwOntXdslPMChHist15MInterval | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.3 | ColumnhwOntXdslPMChHist15MMonitoredTime | read-only | current | Total seconds monitored in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.4 | ColumnhwOntXdslPMChHist15MCodingViolations | read-only | current | Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.5 | ColumnhwOntXdslPMChHist15MCorrectedBlocks | read-only | current | Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If … |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.6 | ColumnhwOntXdslPMChHist15MValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.7 | ColumnhwOntXdslPMChHist15MEncodedBlocks | read-only | current | Count of all encoded blocks received on this channel during the interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.8 | ColumnhwOntXdslPMChHist15MUncorrectableBlocks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during the interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.9 | ColumnhwOntXdslPMChHist15MAtmCells | read-only | current | Count of Atm Cells received on this channel during the interval. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.10 | ColumnhwOntXdslPMChHist15MPtmPackets | read-only | current | Count of Ptm Packets received on this channel during the interval. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.11 | ColumnhwOntXdslPMChHist15MRtxCW | read-only | current | Count of units request retransmission during the serval 15 minute interval of history. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.12 | ColumnhwOntXdslPMChHist15MRtxCorrectedCW | read-only | current | Count of units corrected by retransmission during the serval 15 minute interval of history. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.13 | ColumnhwOntXdslPMChHist15MRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission during the serval 15 minute interval of history. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.6.1.14 | ColumnhwOntXdslPMChHist15MStartTime | read-only | current | Start time of the channel historical 15-minute performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7 | TablehwOntXdslPMChHist1DTable | not-accessible | current | The table hwOntXdslPMChHist1DTable contains PM channel history for 1 day intervals of XDSL2. The indexes of this table are ifIndex, hwOntObjectIndex, hwOntUniP… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1 | RowhwOntXdslPMChHist1DEntry | not-accessible | current | The table hwOntXdslPMChHist1DTable contains PM channel history for 1 day intervals of XDSL2. The indexes of this entry are ifIndex, hwOntObjectIndex, hwOntUniP… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.1 | ColumnhwOntXdslPMChHist1DUnit | not-accessible | current | The termination unit xTU-C(1) or xTU-R(2). |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.2 | ColumnhwOntXdslPMChHist1DInterval | not-accessible | current | The interval number. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.3 | ColumnhwOntXdslPMChHist1DMonitoredTime | read-only | current | Total seconds monitored in this interval. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.4 | ColumnhwOntXdslPMChHist1DCodingViolations | read-only | current | Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov… |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.5 | ColumnhwOntXdslPMChHist1DCorrectedBlocks | read-only | current | Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If … |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.6 | ColumnhwOntXdslPMChHist1DValidInterval | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.7 | ColumnhwOntXdslPMChHist1DEncodedBlocks | read-only | current | Count of all encoded blocks received on this channel during the interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.8 | ColumnhwOntXdslPMChHist1DUncorrectableBlocks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during the interval. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.9 | ColumnhwOntXdslPMChHist1DAtmCells | read-only | current | Count of Atm Cells received on this channel during the interval. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.10 | ColumnhwOntXdslPMChHist1DPtmPackets | read-only | current | Count of Ptm Packets received on this channel during the interval. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.11 | ColumnhwOntXdslPMChHist1DRtxCW | read-only | current | Count of units request retransmission within the serval one day interval of history. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.12 | ColumnhwOntXdslPMChHist1DRtxCorrectedCW | read-only | current | Count of units corrected by retransmission during the serval one day interval of history. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.13 | ColumnhwOntXdslPMChHist1DRtxUncorrectedCW | read-only | current | Count of units uncorrected by retransmission during the serval one day interval of history. Currently, this leaf is reserved, and it is not supported. |
| 1.3.6.1.4.1.2011.6.115.1.4.2.7.1.14 | ColumnhwOntXdslPMChHist1DStartTime | read-only | current | Start time of the channel historical 1-day performance statistics. |
| 1.3.6.1.4.1.2011.6.115.1.5 | NodehwXdslProfile | |||
| 1.3.6.1.4.1.2011.6.115.1.5.1 | NodehwXdslProfileLine | |||
| 1.3.6.1.4.1.2011.6.115.1.5.1.1 | TablehwVdslLineConfTemplateTable | not-accessible | current | The table hwVdslLineConfTemplateTable contains XDSL line configuration template. The index of this table is hwVdslLConfTempTemplateName. A default template wit… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1 | RowhwVdslLineConfTemplateEntry | not-accessible | current | The table hwVdslLineConfTemplateTable contains XDSL line configuration template. The index of this entry is hwVdslLConfTempTemplateName. A default template wit… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.1 | ColumnhwVdslLConfTempTemplateName | accessible-for-notify | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.2 | ColumnhwVdslLConfTempLineProfile | read-create | current | The value of this object identifies the row in the XDSL Line Configuration Profile Table, (hwVdslLineConfProfTable), which applies for this XDSL line. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.3 | ColumnhwVdslLConfTempChan1ConfProfile | read-create | current | The value of this object identifies the row in the XDSL2 Channel Configuration Profile Table, (hwVdslChConfProfileTable) that applies to XDSL bearer channel #1… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.4 | ColumnhwVdslLConfTempChan1RaRatioDs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.5 | ColumnhwVdslLConfTempChan1RaRatioUs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.6 | ColumnhwVdslLConfTempChan2ConfProfile | read-create | current | The value of this object identifies the row in the XDSL2 Channel Configuration Profile Table, (hwVdslChConfProfileTable) that applies to XDSL bearer channel #2… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.7 | ColumnhwVdslLConfTempChan2RaRatioDs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on Downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.8 | ColumnhwVdslLConfTempChan2RaRatioUs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on Upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.9 | ColumnhwVdslLConfTempChan3ConfProfile | read-create | current | The value of this object identifies the row in the XDSL2 Channel Configuration Profile Table, (hwVdslChConfProfileTable) that applies to XDSL bearer channel #3… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.10 | ColumnhwVdslLConfTempChan3RaRatioDs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #3 when performing rate adaptation on Downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.11 | ColumnhwVdslLConfTempChan3RaRatioUs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #3 when performing rate adaptation on Upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.12 | ColumnhwVdslLConfTempChan4ConfProfile | read-create | current | The value of this object identifies the row in the XDSL2 Channel Configuration Profile Table (hwVdslChConfProfileTableDs) that applies to XDSL bearer channel #… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.13 | ColumnhwVdslLConfTempChan4RaRatioDs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #4 when performing rate adaptation on Downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.14 | ColumnhwVdslLConfTempChan4RaRatioUs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #4 when performing rate adaptation on Upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.1.1.15 | ColumnhwVdslLConfTempRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2 | TablehwVdslLineConfProfTable | not-accessible | current | The table hwVdslLineConfProfTable contains XDSL line profile configuration. The index of this table is hwVdslLConfProfProfileName. A default profile with an in… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1 | RowhwVdslLineConfProfEntry | not-accessible | current | The table hwVdslLineConfProfTable contains XDSL line profile configuration. The index of this entry is hwVdslLConfProfProfileName. A default profile with an in… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.1 | ColumnhwVdslLConfProfProfileName | accessible-for-notify | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.2 | ColumnhwVdslLConfProfScMaskDs | read-create | current | Sub-carriers mask. A bitmap of 512 bits that allows masking up to 512 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.3 | ColumnhwVdslLConfProfScMaskUs | read-create | current | Sub-carriers mask. A bitmap of 64 bits that allows masking up to 64 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1',… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.4 | ColumnhwVdslLConfProfRfiBands | read-create | current | The subset of PSD mask breakpoints that shall be used to notch an RFI band. It is a string of bands consist of begin tone index and end tone index. for example… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.5 | ColumnhwVdslLConfProfVDSLtoneblackout | read-create | current | The subset of subcarrier mask that shall be used to mask the subcarriers. It is a string of bands consist of begin tone index and end tone index. for example :… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.6 | ColumnhwVdslLConfProfRaModeDs | read-create | current | The mode of operation of a rate-adaptive xTU-C in the transmit direction. Options: 1. manual(1) - No Rate-Adaptation. The initialization process attempts to sy… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.7 | ColumnhwVdslLConfProfRaModeUs | read-create | current | The mode of operation of a rate-adaptive xTU-R in the transmit direction. Options: 1. manual(1) - No Rate-Adaptation. The initialization process attempts to sy… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.8 | ColumnhwVdslLConfProfRaUsNrmDs | read-create | current | The Downstream Up-Shift Noise Margin value, to be used when hwVdslLConfProfRaModeDs is set to DynamicRa. If the downstream noise margin is above this value and… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.9 | ColumnhwVdslLConfProfRaUsNrmUs | read-create | current | The Upstream Up-Shift Noise Margin value, to be used when hwVdslLConfProfRaModeUs is set to DynamicRa. If the upstream noise margin is above this value and sta… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.10 | ColumnhwVdslLConfProfRaUsTimeDs | read-create | current | The Downstream Up-Shift Time Interval, to be used when hwVdslLConfProfRaModeDs is set to DynamicRa. The interval of time that the downstream noise margin shoul… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.11 | ColumnhwVdslLConfProfRaUsTimeUs | read-create | current | The Upstream Up-Shift Time Interval, to be used when hwVdslLConfProfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should stay ab… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.12 | ColumnhwVdslLConfProfRaDsNrmsDs | read-create | current | The Downstream Down-Shift Noise Margin value, to be used when hwVdslLConfProfRaModeDs is set to DynamicRa. If the downstream noise margin is below this value a… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.13 | ColumnhwVdslLConfProfRaDsNrmsUs | read-create | current | The Upstream Down-shift Noise Margin value, to be used when hwVdslLConfProfRaModeUs is set to DynamicRa. If the upstream noise margin is below this value and s… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.14 | ColumnhwVdslLConfProfRaDsTimeDs | read-create | current | The Downstream Down-shift Time Interval, to be used when hwVdslLConfProfRaModeDs is set to DynamicRa. The interval of time the downstream noise margin should s… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.15 | ColumnhwVdslLConfProfRaDsTimeUs | read-create | current | The Upstream Down-Shift Time Interval, to be used when hwVdslLConfProfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should stay … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.16 | ColumnhwVdslLConfProfTargetSnrmDs | read-create | current | The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.17 | ColumnhwVdslLConfProfTargetSnrmUs | read-create | current | The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete i… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.18 | ColumnhwVdslLConfProfMaxSnrmDs | read-create | current | The maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce the xT… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.19 | ColumnhwVdslLConfProfMaxSnrmUs | read-create | current | The maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce the xT… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.20 | ColumnhwVdslLConfProfMinSnrmDs | read-create | current | The minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.21 | ColumnhwVdslLConfProfMinSnrmUs | read-create | current | The minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.22 | ColumnhwVdslLConfProfMsgMinUs | read-create | current | Minimum Overhead Rate Upstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in upstream direction. Expressed in … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.23 | ColumnhwVdslLConfProfMsgMinDs | read-create | current | Minimum Overhead Rate Downstream. Defines the minimum rate of the message-based overhead that shall be maintained by the xTU in downstream direction. Expressed… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.24 | ColumnhwVdslLConfProfXtuTransSysEna | read-create | current | xTU Transmission System Enabling (XTSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more b… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.25 | ColumnhwVdslLConfProfPmMode | read-create | current | Power management state enabling. Defines the power states the xTU-C or xTU-R may autonomously transition to on this line. Options: 1. allowTransitionsToIdle (0… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.26 | ColumnhwVdslLConfProfL0Time | read-create | current | This minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.27 | ColumnhwVdslLConfProfL2Time | read-create | current | This minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 St… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.28 | ColumnhwVdslLConfProfL2Atpr | read-create | current | The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single Power Trim in the L2 state. It… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.29 | ColumnhwVdslLConfProfL2Atprt | read-create | current | The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at tr… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.30 | ColumnhwVdslLConfProfDpboEpsd | read-create | current | This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number o… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.31 | ColumnhwVdslLConfProfDpboEsel | read-create | current | This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.32 | ColumnhwVdslLConfProfDpboEscm | read-create | current | This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.33 | ColumnhwVdslLConfProfDpboMus | read-create | current | DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shal… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.34 | ColumnhwVdslLConfProfDpboFmin | read-create | current | DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multip… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.35 | ColumnhwVdslLConfProfDpboFmax | read-create | current | DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.36 | ColumnhwVdslLConfProfUpboPsdBand | read-create | current | This parameter defines the UPBO reference PSD used to compute the upstream power back-off for each upstream band except US0. A UPBOPSD defined for each band sh… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.37 | ColumnhwVdslLConfProfUpboKl | read-create | current | This parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value shall be coded as an unsigned 16 bit number… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.38 | ColumnhwVdslLConfProfUpboKlf | read-create | current | This parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB (UPBOKL) to compute the UPBO. The value shall be forced if the f… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.39 | ColumnhwVdslLConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65534 | ColumnhwVdslLConfProfReferenceClock | read-create | current | This object configures the clock reference for the ATU-C in a XDSL Line. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65535 | ColumnhwVdslLConfProfBitSwapDs | read-create | current | Enables or disables the bit swap downstream of a line. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65536 | ColumnhwVdslLConfProfBitSwapUs | read-create | current | Enables or disables the bit swap upstream of a line. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65537 | ColumnhwVdslLConfProfUpboBoostMode | read-create | current | Options: 1. disable(1) - The Equalized FEXT UPBO method is not supported 2. enable(2) - The Equalized FEXT UPBO method is supported |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65538 | ColumnhwVdslLConfProfDpboEselMin | read-create | current | DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and XDSL provision of additional KV… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65539 | ColumnhwVdslLConfProfUpboKl0RefBand | read-create | current | Octets 0+1 - length[1] Octets 2+3 - length[2] Octets 4+5 - length[3] Octets 6+7 - length[4] |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65540 | ColumnhwVdslLConfProfSosTimeDs | read-create | current | The parameter is used in the specification of the receiver initiated SOS. If the value of this parameter is not zero, the standard SOS triggering criteria are … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65541 | ColumnhwVdslLConfProfSosTimeUs | read-create | current | The parameter is used in the specification of the receiver initiated SOS. If the value of this parameter is not zero, the standard SOS triggering criteria are … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65542 | ColumnhwVdslLConfProfSosNtonesDs | read-create | current | This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65543 | ColumnhwVdslLConfProfSosNtonesUs | read-create | current | This parameter is defined as the minimum percentage of tones in the upstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the st… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65544 | ColumnhwVdslLConfProfSosCrcDs | read-create | current | This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub-condition of the sta… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65545 | ColumnhwVdslLConfProfSosCrcUs | read-create | current | This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub-condition of the sta… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65546 | ColumnhwVdslLConfProfMaxSosDs | read-create | current | This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the downstream direction performed within a 120-second interval … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65547 | ColumnhwVdslLConfProfMaxSosUs | read-create | current | This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the upstream direction performed within a 120-second interval ex… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65548 | ColumnhwVdslLConfProfSnrmoffsetRocDs | read-create | current | The parameter is defined as the SNR Margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the Channel In… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65549 | ColumnhwVdslLConfProfSnrmoffsetRocUs | read-create | current | The parameter is defined as the SNR Margin offset for the ROC channel in the upstream direction. The parameter is used in the specification of the Channel Init… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65550 | ColumnhwVdslLConfProfInpminRocDs | read-create | current | This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an intege… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65551 | ColumnhwVdslLConfProfInpminRocUs | read-create | current | This parameter contains the minimum impulse noise protection to apply on the robust ROC in the upstream direction. The minimum impulse noise protection is an i… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65552 | ColumnhwVdslLConfProfInmIatoDs | read-create | current | The parameter of downstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determ… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65553 | ColumnhwVdslLConfProfInmIatsDs | read-create | current | The parameter of downstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65554 | ColumnhwVdslLConfProfInmCcDs | read-create | current | The parameter of Downstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65555 | ColumnhwVdslLConfProfInmInpeqModeDs | read-create | current | The parameter of Downstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65556 | ColumnhwVdslLConfProfInmIatoUs | read-create | current | The parameter of upstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determin… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65557 | ColumnhwVdslLConfProfInmIatsUs | read-create | current | The parameter of upstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine in… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65558 | ColumnhwVdslLConfProfInmCcUs | read-create | current | The parameter of upstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the cl… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65559 | ColumnhwVdslLConfProfInmInpeqModeUs | read-create | current | The parameter of upstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use i… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65560 | ColumnhwVdslLConfProfL3Time | read-create | current | This minimum time (in seconds) between an Entry into the L3 state and the L0 or L2 state. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65561 | ColumnhwVdslLConfProfRtxModeDs | read-create | current | The mode of operation of G.998.4 retransmission in downstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65562 | ColumnhwVdslLConfProfRtxModeUs | read-create | current | The mode of operation of G.998.4 retransmission in upstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998.4… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65563 | ColumnhwVdslLConfProfLeftrThreshDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fracti… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65564 | ColumnhwVdslLConfProfLeftrThreshUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65565 | ColumnhwVdslLConfProfForceInpDs | read-create | current | This parameter indicates that the framer settings of the bearer shall be selected such that the impulse noise protection computed according to the formula spec… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65566 | ColumnhwVdslLConfProfForceInpUs | read-create | current | This parameter indicates that the framer settings of the bearer shall be selected such that the impulse noise protection computed according to the formula spec… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65567 | ColumnhwVdslLConfProfAeleMode | read-create | current | This parameter defines the UPBO electrical length estimation mode to be used in the Alternative Electrical Length Estimation method (ELE-M1) in 7.2.1.3.2.2/G.9… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65568 | ColumnhwVdslLConfProfUpboElmt | read-create | current | This parameter defines the UPBO electrical length minimum threshold percentile in percent used in the Alternative Electrical Length Estimation method (ELE-M1) … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.2.1.65569 | ColumnhwVdslLconfProfUpboKlAuto | read-create | current | This parameter defines the mode in which kl0 is computed when hwVdslLconfProfUpboKlf is auto. Options: 1 2 3 4 4294967295 |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3 | TablehwVdslLineConfProfModeSpecTable | not-accessible | current | The table hwVdslLineConfProfModeSpecTable extends the XDSL line configuration profile by XDSL Mode Specific parameters. A row in this table that has an index o… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1 | RowhwVdslLineConfProfModeSpecEntry | not-accessible | current | The table hwVdslLineConfProfModeSpecTable extends the XDSL line configuration profile by XDSL Mode Specific parameters. A row in this table that has an index o… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.1 | ColumnhwVdslLconfProfVdslMode | not-accessible | current | The XDSL Mode is a way of categorizing the various XDSL transmission modes into groups, each group (XDSL Mode) shares the same PSD configuration. There should … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.2 | ColumnhwVdslLConfProfMaxNomPsdDs | read-create | current | The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical val… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.3 | ColumnhwVdslLConfProfMaxNomPsdUs | read-create | current | The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical value… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.4 | ColumnhwVdslLConfProfMaxNomAtpDs | read-create | current | The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.5 | ColumnhwVdslLConfProfMaxNomAtpUs | read-create | current | The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 p… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.6 | ColumnhwVdslLConfProfMaxAggRxPwrUs | read-create | current | The maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is such that this m… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.7 | ColumnhwVdslLConfProfPsdMaskDs | read-create | current | This configuration parameter defines the downstream PSD mask applicable at the U C2 reference point. This MIB PSD mask may impose PSD restrictions in addition … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.8 | ColumnhwVdslLConfProfPsdMaskUs | read-create | current | This configuration parameter defines the upstream PSD mask applicable at the U R2 reference point. This MIB PSD mask may impose PSD restrictions in addition to… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.9 | ColumnhwVdslLConfProfPsdMaskSelectUs | read-create | current | The selected upstream PSD mask. This parameter is used only for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.10 | ColumnhwVdslLConfProfPSDClassMask | read-create | current | In order to reduce the number of configuration possibilities, the limit PSD masks are grouped in the following PSD mask classes: - Class 998 Annex A: D-32, D-6… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.11 | ColumnhwVdslLConfProfProfiles | read-create | current | This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.12 | ColumnhwVdslLConfProfBandOptUsage | read-create | current | Defines the XDSL link use of the optional frequency range [25kHz - 138kHz] (Opt). Options: 1. unused(1) - indicates Opt is unused 2. used(2) - indicates Opt us… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.13 | ColumnhwVdslLConfProfModeSpecRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65535 | ColumnhwVdslConfProfVirtualNoiseModeDs | read-create | current | This parameter enables the transmitter referred virtual noise in the downstream direction. If set to 1, the virtual noise is disabled. If set to 2, the virtual… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65536 | ColumnhwVdslConfProfVirtualNoiseModeUs | read-create | current | This parameter enables the transmitter referred virtual noise in the upstream direction. If set to 1, the virtual noise is disabled. If set to 2, the virtual n… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65537 | ColumnhwVdslConfProfVirtualNoiseDs | read-create | current | This configuration parameter defines the downstream transmitter referred virtual noise (TXREFVNds). The TXREFVNds shall be specified through a set of breakpoin… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65538 | ColumnhwVdslConfProfVirtualNoiseUs | read-create | current | This configuration parameter defines the upstream transmitter referred virtual noise (TXREFVNus). The TXREFVNus shall be specified through a set of breakpoints… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.3.1.65539 | ColumnhwVdslConfProfAutoProfile | read-create | current | Enable or disable the G.993.2 profiles adaptive function. If set to 1, the G.993.2 profiles adaptive function is disabled. If set to 2, the G.993.2 profiles ad… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.4 | TablehwXdslTR129LineConfTemplateTable | not-accessible | current | The table hwXdslTR129LineConfTemplateTable contains XDSL line configuration template. The index of this table is hwXdslTR129LineConfTempTemplateName. A default… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.4.1 | RowhwXdslTR129LineConfTemplateEntry | not-accessible | current | The table hwXdslTR129LineConfTemplateTable contains XDSL line configuration template. The index of this entry is hwXdslTR129LineConfTempTemplateName. A default… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.4.1.1 | ColumnhwXdslTR129LineConfTempTemplateName | accessible-for-notify | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.4.1.2 | ColumnhwXdslTR129LineConfTempLineProfile | read-create | current | The value of this object identifies the row in the XDSL Line Configuration Profile Table, (hwXdslTR129LineConfProfTable), which applies for this XDSL line. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.4.1.3 | ColumnhwXdslTR129LineConfTempChanConfProfile | read-create | current | The value of this object identifies the row in the XDSL Channel Configuration Profile Table (hwXdslTR129ChConfProfileTable) that applies to XDSL bearer channel… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.4.1.4 | ColumnhwXdslTR129LineConfTempRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5 | TablehwXdslTR129LineConfProfTable | not-accessible | current | The table hwXdslTR129LineConfProfTable contains XDSL line profile configuration. The index of this table is hwXdslTR129LineConfProfProfileName. A default profi… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1 | RowhwXdslTR129LineConfProfEntry | not-accessible | current | The table hwXdslTR129LineConfProfTable contains XDSL line profile configuration. The index of this entry is hwXdslTR129LineConfProfProfileName. A default profi… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.1 | ColumnhwXdslTR129LineConfProfProfileName | accessible-for-notify | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.2 | ColumnhwXdslTR129LineConfProfScMaskDs | read-create | current | Sub-carriers mask. A bitmap of 512 bits that allows masking up to 512 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.3 | ColumnhwXdslTR129LineConfProfScMaskUs | read-create | current | Sub-carriers mask. A bitmap of 64 bits that allows masking up to 64 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1',… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.4 | ColumnhwXdslTR129LineConfProfRfiBands | read-create | current | The subset of PSD mask breakpoints that shall be used to notch an RFI band. It is a string of bands consist of begin tone index and end tone index. for example… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.5 | ColumnhwXdslTR129LineConfProfVDSLtoneblackout | read-create | current | The subset of subcarrier mask that shall be used to mask the subcarriers. It is a string of bands consist of begin tone index and end tone index. for example :… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.6 | ColumnhwXdslTR129LineConfProfRaModeDs | read-create | current | The mode of operation of a rate-adaptive xTU-C in the transmit direction. Options: 1. manual(1) - No Rate-Adaptation.The initialization process attempts to syn… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.7 | ColumnhwXdslTR129LineConfProfRaModeUs | read-create | current | The mode of operation of a rate-adaptive xTU-R in the transmit direction. Options: 1. manual(1) - No Rate-Adaptation.The initialization process attempts to syn… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.8 | ColumnhwXdslTR129LineConfProfRaUsNrmDs | read-create | current | The Downstream Up-Shift Noise Margin value, to be used when hwXdslTR129LineConfProfRaModeDs is set to DynamicRa. If the downstream noise margin is above this v… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.9 | ColumnhwXdslTR129LineConfProfRaUsNrmUs | read-create | current | The Upstream Up-Shift Noise Margin value, to be used when hwXdslTR129LineConfProfRaModeUs is set to DynamicRa. If the upstream noise margin is above this value… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.10 | ColumnhwXdslTR129LineConfProfRaUsTimeDs | read-create | current | The Downstream Up-Shift Time Interval, to be used when hwXdslTR129LineConfProfRaModeDs is set to DynamicRa. The interval of time that the downstream noise marg… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.11 | ColumnhwXdslTR129LineConfProfRaUsTimeUs | read-create | current | The Upstream Up-Shift Time Interval, to be used when hwXdslTR129LineConfProfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.12 | ColumnhwXdslTR129LineConfProfRaDsNrmsDs | read-create | current | The Downstream Down-Shift Noise Margin value, to be used when hwXdslTR129LineConfProfRaModeDs is set to DynamicRa. If the downstream noise margin is below this… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.13 | ColumnhwXdslTR129LineConfProfRaDsNrmsUs | read-create | current | The Upstream Down-shift Noise Margin value, to be used when hwXdslTR129LineConfProfRaModeUs is set to DynamicRa. If the upstream noise margin is below this val… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.14 | ColumnhwXdslTR129LineConfProfRaDsTimeDs | read-create | current | The Downstream Down-shift Time Interval, to be used when hwXdslTR129LineConfProfRaModeDs is set to DynamicRa. The interval of time the downstream noise margin … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.15 | ColumnhwXdslTR129LineConfProfRaDsTimeUs | read-create | current | The Upstream Down-Shift Time Interval, to be used when hwXdslTR129LineConfProfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin shou… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.16 | ColumnhwXdslTR129LineConfProfTargetSnrmDs | read-create | current | The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.17 | ColumnhwXdslTR129LineConfProfTargetSnrmUs | read-create | current | The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete i… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.18 | ColumnhwXdslTR129LineConfProfMaxSnrmDs | read-create | current | The maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce the xT… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.19 | ColumnhwXdslTR129LineConfProfMaxSnrmUs | read-create | current | The maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce the xT… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.20 | ColumnhwXdslTR129LineConfProfMinSnrmDs | read-create | current | The minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.21 | ColumnhwXdslTR129LineConfProfMinSnrmUs | read-create | current | The minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.22 | ColumnhwXdslTR129LineConfProfXtuTransSysEna | read-create | current | xTU Transmission System Enabling (XTSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more b… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.23 | ColumnhwXdslTR129LineConfProfPmMode | read-create | current | Power management state Enabling. Defines the power states the xTU-C or xTU-R may autonomously transition to on this line. Options: 1. allowTransitionsToIdle (0… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.24 | ColumnhwXdslTR129LineConfProfL0Time | read-create | current | This minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.25 | ColumnhwXdslTR129LineConfProfL2Time | read-create | current | This minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 St… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.26 | ColumnhwXdslTR129LineConfProfL2Atpr | read-create | current | The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single Power Trim in the L2 state. It… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.27 | ColumnhwXdslTR129LineConfProfL2Atprt | read-create | current | The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at tr… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.28 | ColumnhwXdslTR129LineConfProfDpboEpsd | read-create | current | This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number o… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.29 | ColumnhwXdslTR129LineConfProfDpboEsel | read-create | current | This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.30 | ColumnhwXdslTR129LineConfProfDpboEscm | read-create | current | This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.31 | ColumnhwXdslTR129LineConfProfDpboMus | read-create | current | DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shal… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.32 | ColumnhwXdslTR129LineConfProfDpboFmin | read-create | current | DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multip… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.33 | ColumnhwXdslTR129LineConfProfDpboFmax | read-create | current | DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.34 | ColumnhwXdslTR129LineConfProfUpboPsdBand | read-create | current | This parameter defines the UPBO reference PSD used to compute the upstream power back-off for each upstream band except US0. A UPBOPSD defined for each band sh… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.35 | ColumnhwXdslTR129LineConfProfUpboKl | read-create | current | This parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value shall be coded as an unsigned 16 bit number… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.36 | ColumnhwXdslTR129LineConfProfUpboKlf | read-create | current | This parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB (UPBOKL) to compute the UPBO. The value shall be forced if the f… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.37 | ColumnhwXdslTR129LineConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.38 | ColumnhwXdslTR129LineConfProfReferenceClock | read-create | current | This object configures the clock reference for the ATU-C in a XDSL Line. Options: 1. freeRun(1) - network timing reference clock mode is freeRun 2. system(2) -… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.39 | ColumnhwXdslTR129LineConfProfBitSwapDs | read-create | current | Enables or disables the bit swap downstream of a line. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.40 | ColumnhwXdslTR129LineConfProfBitSwapUs | read-create | current | Enables or disables the bit swap upstream of a line. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.41 | ColumnhwXdslTR129LineConfProfUpboBoostMode | read-create | current | Options: 1. disable(1) - The Equalized FEXT UPBO method is not supported 2. enable(2) - The Equalized FEXT UPBO method is supported |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.42 | ColumnhwXdslTR129LineConfProfDpboEselMin | read-create | current | DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and XDSL provision of additional KV… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.43 | ColumnhwXdslTR129LineConfProfUpboKl0RefBand | read-create | current | This parameter defines the UPBO reference electrical length used to compute the upstream power back-off for each upstream band except US0, for the optional Equ… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.44 | ColumnhwXdslTR129LineConfProfSosTimeDs | read-create | current | The parameter is used in the specification of the receiver initiated SOS. If the value of this parameter is not zero, the standard SOS triggering criteria are … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.45 | ColumnhwXdslTR129LineConfProfSosTimeUs | read-create | current | The parameter is used in the specification of the receiver initiated SOS. If the value of this parameter is not zero, the standard SOS triggering criteria are … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.46 | ColumnhwXdslTR129LineConfProfSosNtonesDs | read-create | current | This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.47 | ColumnhwXdslTR129LineConfProfSosNtonesUs | read-create | current | This parameter is defined as the minimum percentage of tones in the upstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the st… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.48 | ColumnhwXdslTR129LineConfProfSosCrcDs | read-create | current | This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub-condition of the sta… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.49 | ColumnhwXdslTR129LineConfProfSosCrcUs | read-create | current | This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub-condition of the sta… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.50 | ColumnhwXdslTR129LineConfProfMaxSosDs | read-create | current | This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the downstream direction performed within a 120-second interval … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.51 | ColumnhwXdslTR129LineConfProfMaxSosUs | read-create | current | This parameter is used in G.993.2 de-activation. If the number of successful SOS procedures in the upstream direction performed within a 120-second interval ex… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.52 | ColumnhwXdslTR129LineConfProfSnrmoffsetRocDs | read-create | current | The parameter is defined as the SNR Margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the Channel In… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.53 | ColumnhwXdslTR129LineConfProfSnrmoffsetRocUs | read-create | current | The parameter is defined as the SNR Margin offset for the ROC channel in the upstream direction. The parameter is used in the specification of the Channel Init… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.54 | ColumnhwXdslTR129LineConfProfInpminRocDs | read-create | current | This parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an intege… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.55 | ColumnhwXdslTR129LineConfProfInpminRocUs | read-create | current | This parameter contains the minimum impulse noise protection to apply on the robust ROC in the upstream direction. The minimum impulse noise protection is an i… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.56 | ColumnhwXdslTR129LineConfProfInmIatoDs | read-create | current | The parameter of downstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determ… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.57 | ColumnhwXdslTR129LineConfProfInmIatsDs | read-create | current | The parameter of downstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.58 | ColumnhwXdslTR129LineConfProfInmCcDs | read-create | current | The parameter of Downstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.59 | ColumnhwXdslTR129LineConfProfInmInpeqModeDs | read-create | current | The parameter of Downstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.60 | ColumnhwXdslTR129LineConfProfInmIatoUs | read-create | current | The parameter of upstream impulse noise monitoring inter arrival time offset. This is the Inter Arrival Time Offset that the xTU receiver shall use to determin… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.61 | ColumnhwXdslTR129LineConfProfInmIatsUs | read-create | current | The parameter of upstream impulse noise monitoring inter arrival time step. This is the Inter Arrival Time Step that the xTU receiver shall use to determine in… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.62 | ColumnhwXdslTR129LineConfProfInmCcUs | read-create | current | The parameter of upstream impulse noise monitoring cluster continuation value. This is the Cluster Continuation value that the xTU receiver shall use in the cl… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.63 | ColumnhwXdslTR129LineConfProfInmInpeqModeUs | read-create | current | The parameter of upstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use i… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.64 | ColumnhwXdslTR129LineConfProfL3Time | read-create | current | This minimum time (in seconds) between an Entry into the L3 state and the L0 or L2 state. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.65 | ColumnhwXdslTR129LineConfProfRtxModeDs | read-create | current | The mode of operation of G.998.4 retransmission in downstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.66 | ColumnhwXdslTR129LineConfProfRtxModeUs | read-create | current | The mode of operation of G.998.4 retransmission in upstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998.4… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.67 | ColumnhwXdslTR129LineConfProfLeftrThreshDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fracti… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.68 | ColumnhwXdslTR129LineConfProfLeftrThreshUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.69 | ColumnhwXdslTR129LineConfProfForceInpDs | read-create | current | This parameter indicates that the framer settings of the bearer shall be selected such that the impulse noise protection computed according to the formula spec… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.70 | ColumnhwXdslTR129LineConfProfForceInpUs | read-create | current | This parameter indicates that the framer settings of the bearer shall be selected such that the impulse noise protection computed according to the formula spec… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.71 | ColumnhwXdslTR129LineConfProfAeleMode | read-create | current | This parameter defines the UPBO electrical length estimation mode to be used in the Alternative Electrical Length Estimation method (ELE-M1) in 7.2.1.3.2.2/G.9… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.72 | ColumnhwXdslTR129LineConfProfUpboElmt | read-create | current | This parameter defines the UPBO electrical length minimum threshold percentile in percent used in the Alternative Electrical Length Estimation method (ELE-M1) … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.73 | ColumnhwXdslTR129LineConfProfUpboKlAuto | read-create | current | This parameter defines the mode in which kl0 is computed when hwXdslTR129LineConfProfUpboKlf is auto. Options: 1 2 3 4 4294967295 |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.74 | ColumnhwXdslTR129LineConfProfGfastProfiles | read-create | current | The configuration parameter contains the G.fast profiles to be allowed by the near-end xTU on this line. It is coded in a bitmap representation (0 if not allow… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.75 | ColumnhwXdslTR129LineConfProfGfastLineLowFreqEdgeValueDs | read-create | current | Low-frequency Edge Stop-band Mask(LESM). If a LESM is used, the LESM shall be specified with breakpoints. These breakpoints are specified starting from ftr1, w… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.76 | ColumnhwXdslTR129LineConfProfGfastCarMaskDs | read-create | current | G.fast specific subcarriers mask. This configuration parameter defines the restrictions, additional to the band plan, to determine the set of subcarriers allow… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.77 | ColumnhwXdslTR129LineConfProfGfastUpboKL | read-create | current | This configuration parameter defines the G.fast electrical length expressed in dB at 1MHz, kl0, configured by the DPU-MIB.The value ranges from 0 (coded as 0) … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.78 | ColumnhwXdslTR129LineConfProfGfastUpboKLF | read-create | current | Defines the G.fast upstream power backoff force mode. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.79 | ColumnhwXdslTR129LineConfProfGfastKlAuto | read-create | current | This parameter defines the mode in which kl0 is computed when hwXdslTR129LineConfProfGfastUpboKLF is auto. Options: 1 2 3 4 |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.80 | ColumnhwXdslTR129LineConfProfGfastUpboKLREF | read-create | current | This parameter defines the UPBO reference electrical length used to compute the upstream power back-off, for the optional Equalized FEXT UPBO method. The value… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.81 | ColumnhwXdslTR129LineConfProfGfastUpboPsdA | read-create | current | This configuration parameter defines the 'a' reference parameter of the UPBO reference PSD used to compute the upstream power back-off.A UPBOPSD shall consist … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.82 | ColumnhwXdslTR129LineConfProfGfastUpboPsdB | read-create | current | This configuration parameter defines the 'b' reference parameter of the UPBO reference PSD used to compute the upstream power back-off.A UPBOPSD shall consist … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.83 | ColumnhwXdslTR129LineConfProfGfastRfiBands | read-create | current | This configuration parameter defines the bands where the PSD shall be reduced as specified in ITU-T G.9701 #7.3.1.2. Each band shall be represented by a start … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.84 | ColumnhwXdslTR129LineConfProfGfastIarBands | read-create | current | Defines for each International Amateur Radio (IAR) band whether transmit PSD reduction is enabled or disabled in that band. It is represented as a bitmap (0 if… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.85 | ColumnhwXdslTR129LineConfProfGfastMinSnrmDs | read-create | current | The G.fast minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.86 | ColumnhwXdslTR129LineConfProfGfastMinSnrmUs | read-create | current | The G.fast minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.87 | ColumnhwXdslTR129LineConfProfGfastTargetSnrmDs | read-create | current | The G.fast minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement, to successfully complete initialization. The target noise ma… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.88 | ColumnhwXdslTR129LineConfProfGfastTargetSnrmUs | read-create | current | The G.fast minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement, to successfully complete initialization. The target noise ma… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.89 | ColumnhwXdslTR129LineConfProfGfastMaxSnrmDs | read-create | current | The G.fast maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.90 | ColumnhwXdslTR129LineConfProfGfastMaxSnrmUs | read-create | current | The G.fast maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.91 | ColumnhwXdslTR129LineConfProfGfastRaUsNrmDs | read-create | current | The G.fast Downstream Up-Shift Noise Margin value. If the downstream noise margin is above this value, and stays above it for more than the time specified by t… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.92 | ColumnhwXdslTR129LineConfProfGfastRaUsNrmUs | read-create | current | The G.fast Upstream Up-Shift Noise Margin value. If the upstream noise margin is above this value, and stays above it for more than the time specified by the h… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.93 | ColumnhwXdslTR129LineConfProfGfastRaDsNrmDs | read-create | current | The G.fast Downstream Down-Shift Noise Margin value, to be used when hwXdslTR129LineConfProfGfastRaModeDs is set to dynamicRa. If the downstream noise margin i… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.94 | ColumnhwXdslTR129LineConfProfGfastRaDsNrmUs | read-create | current | The G.fast Upstream Down-shift Noise Margin value. If the upstream noise margin is below this value, and stays below it for more than the time specified by the… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.95 | ColumnhwXdslTR129LineConfProfGfastUsTimeDs | read-create | current | The G.fast Downstream Up-Shift Time Interval, to be used when hwXdslTR129LineConfProfGfastRaModeDs is set to dynamicRa. The interval of time that the downstrea… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.96 | ColumnhwXdslTR129LineConfProfGfastUsTimeUs | read-create | current | The G.fast Upstream Up-Shift Time Interval. The interval of time the upstream noise margin should stay above the Upstream Up-Shift Noise Margin before the xTU-… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.97 | ColumnhwXdslTR129LineConfProfGfastDsTimeDs | read-create | current | The G.fast Downstream Down-shift Time Interval, to be used when hwXdslTR129LineConfProfGfastRaModeDs is set to dynamicRa. The interval of time the downstream n… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.98 | ColumnhwXdslTR129LineConfProfGfastDsTimeUs | read-create | current | The Upstream Down-shift Time Interval. The interval of time the upstream noise margin should stay below the Upstream Down-shift Noise Margin before the xTU-C s… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.99 | ColumnhwXdslTR129LineConfProfGfastSosFraTimeDs | read-create | current | The parameter is used in the specification of the receiver initiated FRA. If the value of this parameter is not zero, the standard FRA triggering criteria are … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.100 | ColumnhwXdslTR129LineConfProfGfastSosFraTimeUs | read-create | current | The parameter is used in the specification of the receiver initiated FRA. If the value of this parameter is not zero, the standard FRA triggering criteria are … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.101 | ColumnhwXdslTR129LineConfProfGfastSosFraNtonesDs | read-create | current | This parameter is defined as the minimum percentage of tones that must be degraded in order to arm the first sub-condition of the standard FRA triggering crite… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.102 | ColumnhwXdslTR129LineConfProfGfastSosFraNtonesUs | read-create | current | This parameter is defined as the minimum percentage of tones that must be degraded in order to arm the first sub-condition of the standard FRA triggering crite… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.103 | ColumnhwXdslTR129LineConfProfGfastSosFraMinRtxUcDs | read-create | current | This parameter is defined as minimum number of rtx-uc anomalies received throughout a time window equal to FRA-TIME-ds in order to arm the second FRA triggerin… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.104 | ColumnhwXdslTR129LineConfProfGfastSosFraMinRtxUcUs | read-create | current | This parameter is defined as the minimum number of rtx-uc anomalies received throughout a time window equal to FRA-TIME-us in order to arm the second FRA trigg… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.105 | ColumnhwXdslTR129LineConfProfGfastCarMaskUs | read-create | current | G.fast specific subcarriers mask. This configuration parameter defines the restrictions, additional to the band plan, to determine the set of subcarriers allow… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.106 | ColumnhwXdslTR129LineConfProfGfastTargetSnrmRmcDs | read-create | current | Defines the downstream RMC noise margin that the FTU-R receiver shall achieve, relative to the BER requirement, or better, to successfully complete initializat… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.107 | ColumnhwXdslTR129LineConfProfGfastTargetSnrmRmcUs | read-create | current | Defines the upstream RMC noise margin that the FTU-O receiver shall achieve, relative to the BER requirement, or better, to successfully complete initializatio… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.108 | ColumnhwXdslTR129LineConfProfGfastMinSnrmRmcDs | read-create | current | Defines the downstream minimum noise margin the FTU-R receiver tolerates for the RMC. If the downstream RMC noise margin falls below this level, the FTU-R init… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.109 | ColumnhwXdslTR129LineConfProfGfastMinSnrmRmcUs | read-create | current | Defines the upstream minimum noise margin the FTU-O receiver tolerates for the RMC. If the upstream RMC noise margin falls below this level, the FTU-O initiate… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.110 | ColumnhwXdslTR129LineConfProfGfastMaxBLRmcDs | read-create | current | Defines the maximum allowed bit-loading for the downstream RMC sub-carriers. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.111 | ColumnhwXdslTR129LineConfProfGfastMaxBLRmcUs | read-create | current | Defines the maximum allowed bit-loading for the upstream RMC sub-carriers. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.112 | ColumnhwXdslTR129LineConfProfGfastSosFraVenDiscDs | read-create | current | Enable or disable vendor discretionary FRA triggering criteria in the downstream direction. Options: 1. disable (1) - Disable vendor discretionary FRA triggeri… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.113 | ColumnhwXdslTR129LineConfProfGfastSosFraVenDiscUs | read-create | current | Enable or disable vendor discretionary FRA triggering criteria in the upstream direction. Options: 1. disable (1) - Disable vendor discretionary FRA triggering… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.5.1.114 | ColumnhwXdslTR129LineConfProfGfastLineLowFreqEdgeValueUs | read-create | current | Low-frequency Edge Stop-band Mask(LESM). If a LESM is used, the LESM shall be specified with breakpoints. These breakpoints are specified starting from ftr1, w… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6 | TablehwXdslTR129LineConfProfModeSpecTable | not-accessible | current | The table hwXdslTR129LineConfProfModeSpecTable extends the XDSL line configuration profile by XDSL Mode Specific parameters. A row in this table that has an in… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1 | RowhwXdslTR129LineConfProfModeSpecEntry | not-accessible | current | The table hwXdslTR129LineConfProfModeSpecTable extends the XDSL line configuration profile by XDSL Mode Specific parameters. A row in this table that has an in… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.1 | ColumnhwXdslTR129LineConfProfMode | not-accessible | current | The XDSL Mode is a way of categorizing the various XDSL transmission modes into groups, each group (XDSL Mode) shares the same PSD configuration. There should … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.2 | ColumnhwXdslTR129LineConfProfMaxNomAtpDs | read-create | current | The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.3 | ColumnhwXdslTR129LineConfProfMaxNomAtpUs | read-create | current | The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 p… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.4 | ColumnhwXdslTR129LineConfProfPsdMaskDs | read-create | current | This configuration parameter defines the downstream PSD mask applicable at the U C2 reference point. This MIB PSD mask may impose PSD restrictions in addition … |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.5 | ColumnhwXdslTR129LineConfProfPsdMaskUs | read-create | current | This configuration parameter defines the upstream PSD mask applicable at the U R2 reference point. This MIB PSD mask may impose PSD restrictions in addition to… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.6 | ColumnhwXdslTR129LineConfProfPsdMaskSelectUs | read-create | current | The selected upstream PSD mask. This parameter is used only for annexes J and M of G.992.3 and G.992.5, and the same selection is used for all relevant enabled… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.7 | ColumnhwXdslTR129LineConfProfPSDClassMask | read-create | current | In order to reduce the number of configuration possibilities, the limit PSD masks are grouped in the following PSD mask classes: - Class 998 Annex A: D-32, D-6… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.8 | ColumnhwXdslTR129LineConfProfProfiles | read-create | current | This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.9 | ColumnhwXdslTR129LineConfProfBandOptUsage | read-create | current | Defines the XDSL link use of the optional frequency range [25kHz - 138kHz] (Opt). Options: 1. unused(1) - indicates Opt is unused 2. used(2) - indicates Opt us… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.10 | ColumnhwXdslTR129LineConfProfModeSpecRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.11 | ColumnhwXdslTR129LineConfProfVirtualNoiseModeDs | read-create | current | This parameter enables the transmitter referred virtual noise in the downstream direction. If set to 1, the virtual noise is disabled. If set to 2, the virtual… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.12 | ColumnhwXdslTR129LineConfProfVirtualNoiseModeUs | read-create | current | This parameter enables the transmitter referred virtual noise in the upstream direction. If set to 1, the virtual noise is disabled. If set to 2, the virtual n… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.13 | ColumnhwXdslTR129LineConfProfVirtualNoiseDs | read-create | current | This configuration parameter defines the downstream transmitter referred virtual noise (TXREFVNds). The TXREFVNds shall be specified through a set of breakpoin… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.14 | ColumnhwXdslTR129LineConfProfVirtualNoiseUs | read-create | current | This configuration parameter defines the upstream transmitter referred virtual noise (TXREFVNus). The TXREFVNus shall be specified through a set of breakpoints… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.15 | ColumnhwXdslTR129LineConfProfAutoProfile | read-create | current | Enable or disable the G.993.2 profiles adaptive function. If set to 1, the G.993.2 profiles adaptive function is disabled. If set to 2, the G.993.2 profiles ad… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.16 | ColumnhwXdslTR129LineConfProfGfastPsdMaskDs | read-create | current | The downstream PSD mask applicable at the U-O2 reference point. This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defi… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.17 | ColumnhwXdslTR129LineConfProfGfastPsdMaskUs | read-create | current | The upstream PSD mask applicable at the U-R2 reference point. This parameter may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask define… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.18 | ColumnhwXdslTR129LineConfProfGfastMaxNomAtpDs | read-create | current | The G.fast maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0… |
| 1.3.6.1.4.1.2011.6.115.1.5.1.6.1.19 | ColumnhwXdslTR129LineConfProfGfastMaxNomAtpUs | read-create | current | The G.fast maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 t… |
| 1.3.6.1.4.1.2011.6.115.1.5.2 | NodehwXdslProfileChannel | |||
| 1.3.6.1.4.1.2011.6.115.1.5.2.1 | TablehwVdslChConfProfileTable | not-accessible | current | The table hwVdslChConfProfileTable contains XDSL channel profile configuration. The index of this table is hwVdslChConfProfProfileName. A default profile with … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1 | RowhwVdslChConfProfileEntry | not-accessible | current | The table hwVdslChConfProfileTable contains XDSL channel profile configuration. The index of this entry is hwVdslChConfProfProfileName. A default profile with … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.1 | ColumnhwVdslChConfProfProfileName | accessible-for-notify | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.2 | ColumnhwVdslChConfProfMinDataRateDs | read-create | current | If retransmission is not used in downstream direction,this parameter specifics minimum data rate for the bearer channel on downstream direction. The rate is co… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.3 | ColumnhwVdslChConfProfMinDataRateUs | read-create | current | If retransmission is not used in upstream direction,this parameter specifics minimum data rate for the bearer channel on upstream direction. The rate is coded … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.4 | ColumnhwVdslChConfProfMinResDataRateDs | read-create | current | Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if t… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.5 | ColumnhwVdslChConfProfMinResDataRateUs | read-create | current | Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.6 | ColumnhwVdslChConfProfMaxDataRateDs | read-create | current | If retransmission is not used in downstream direction,this parameter specifics maximum data rate for the bearer channel on downstream direction. The rate is co… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.7 | ColumnhwVdslChConfProfMaxDataRateUs | read-create | current | If retransmission is not used in upstream direction,this parameter specifics maximum data rate for the bearer channel on upstream direction. The rate is coded … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.8 | ColumnhwVdslChConfProfMinDataRateLowPwrDs | read-create | current | Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.9 | ColumnhwVdslChConfProfMinDataRateLowPwrUs | read-create | current | Minimum Data Rate in Low Power state on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 in… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.10 | ColumnhwVdslChConfProfMaxDelayDs | read-create | current | If retransmission is not used in downstream direction,this parameter is maximum interleave delay on downstream direction. The maximum one-way interleaving dela… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.11 | ColumnhwVdslChConfProfMaxDelayUs | read-create | current | If retransmission is not used in upstream direction,this parameter is maximum interleave delay on upstream direction. The maximum one-way interleaving delay in… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.12 | ColumnhwVdslChConfProfMinProtectionDs | read-create | current | If retransmission is not used in downstream direction,this parameter is minimum impulse noise protection for the bearer channel on downstream direction. The mi… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.13 | ColumnhwVdslChConfProfMinProtectionUs | read-create | current | If retransmission is not used in upstream direction,this parameter is minimum impulse noise protection for the bearer channel on upstream direction. The minimu… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.14 | ColumnhwVdslChConfProfMaxBerDs | read-create | current | Maximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.15 | ColumnhwVdslChConfProfMaxBerUs | read-create | current | Maximum Bit Error Ratio on Upstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the following values (for 1E-3, 1E-5 … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.16 | ColumnhwVdslChConfProfUsDataRateDs | read-create | current | If retransmission is not used in downstream direction,this parameter is data rate threshold up-shift for downstream direction. An 'Up-shift rate change' event … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.17 | ColumnhwVdslChConfProfDsDataRateDs | read-create | current | If retransmission is not used in downstream direction,this parameter is data rate threshold down-shift for downstream direction. A 'Down-shift rate change' eve… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.18 | ColumnhwVdslChConfProfUsDataRateUs | read-create | current | If retransmission is not used in upstream direction,this parameter is data rate threshold up shift for upstream direction. An 'Up-shift rate change' event is t… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.19 | ColumnhwVdslChConfProfDsDataRateUs | read-create | current | If retransmission is not used in upstream direction,this parameter is data rate threshold down-shift for upstream direction. A 'Down-shift rate change' event i… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.20 | ColumnhwVdslChConfProfImaEnabled | read-create | current | IMA Mode Enable. The parameter enables the IMA operation mode in the ATM Data Path. Relevant only if the channel is of ATM Data Path. When in 'enable' state, t… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.21 | ColumnhwVdslChConfProfDataPathMode | read-create | current | The channel data path mode. Options: 1. atm(1) - ATM 2. ptm(2) - PTM 3. both(3) - ATM and PTM Huawei defined. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.22 | ColumnhwVdslChConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.23 | ColumnhwVdslChConfProfPhyRcontrolDs | read-create | current | To enable or disable the retransmission function. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.24 | ColumnhwVdslChConfProfPhyRcontrolUs | read-create | current | To enable or disable the retransmission function. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.25 | ColumnhwVdslChConfProfInpMaxDs | read-create | current | Maximum Impulse Noise Protection on downstream direction. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.26 | ColumnhwVdslChConfProfInpMaxUs | read-create | current | Maximum Impulse Noise Protection on upstream direction. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.27 | ColumnhwVdslChConfProfMinRtxRatioDs | read-create | current | This object is used to config the minimum retransmission band width parameter downstream. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.28 | ColumnhwVdslChConfProfMinRtxRatioUs | read-create | current | This object is used to config the minimum retransmission band width parameter upstream. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.29 | ColumnhwVdslChConfProfMinRSoverheadDs | read-create | current | This object is used to config the minimum RSoverhead parameter downstream.. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.30 | ColumnhwVdslChConfProfMinRSoverheadUs | read-create | current | This object is used to config the minimum RSoverhead parameter upstream.. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.31 | ColumnhwVdslChConfProfErasureDecoding | read-create | current | To enable or disable the erasure decoding of a channel. Options: 1. enable(1) 2. disable(2) |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.32 | ColumnhwVdslChConfProfMinSosBrDs | read-create | current | This parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The valid range of values is from 0 to 65535 K… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.33 | ColumnhwVdslChConfProfMinSosBrUs | read-create | current | This parameter specifies the minimum net data rate required for a valid SOS request in the upstream direction. The valid range of values is from 0 to 65535 Kbp… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.34 | ColumnhwVdslChConfProfMinEtrRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.35 | ColumnhwVdslChConfProfMinEtrRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of 1… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.36 | ColumnhwVdslChConfProfMaxEtrRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.37 | ColumnhwVdslChConfProfMaxEtrRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of 1… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.38 | ColumnhwVdslChConfProfMaxNdrRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the maximum net data rate for the bearer channel. The values range in steps of 1000… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.39 | ColumnhwVdslChConfProfMaxNdrRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the maximum net data rate for the bearer channel.The values range in steps of 1000 bi… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.40 | ColumnhwVdslChConfProfMaxDelayRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (s… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.41 | ColumnhwVdslChConfProfMaxDelayRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.42 | ColumnhwVdslChConfProfMinDelayRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (s… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.43 | ColumnhwVdslChConfProfMinDelayRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.44 | ColumnhwVdslChConfProfMinInpShineRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.45 | ColumnhwVdslChConfProfMinInpShineRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is tr… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.46 | ColumnhwVdslChConfProfMinInp8ShineRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.47 | ColumnhwVdslChConfProfMinInp8ShineRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is tr… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.48 | ColumnhwVdslChConfProfShineRatioRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.49 | ColumnhwVdslChConfProfShineRatioRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 i… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.50 | ColumnhwVdslChConfProfMinInpReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is t… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.51 | ColumnhwVdslChConfProfMinInpReinRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is tra… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.52 | ColumnhwVdslChConfProfMinInp8ReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is t… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.53 | ColumnhwVdslChConfProfMinInp8ReinRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is tra… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.54 | ColumnhwVdslChConfProfIatReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequ… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.55 | ColumnhwVdslChConfProfIatReinRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequen… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.56 | ColumnhwVdslChConfProfInitPolicy | read-create | current | This parameter indicates which policy shall be applied to determine the transceiver configuration parameters at initialization. The valid values for CIPOLICY a… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.57 | ColumnhwVdslChConfProfMaxDataRateLowPwrDs | read-create | current | Maximum Data Rate in Low Power state on Downstream direction. The maximum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.58 | ColumnhwVdslChConfProfL2MinDataRateToL0ActDataRateDs | read-create | current | The ratio between data rate in low power state and data rate in normal state. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.59 | ColumnhwVdslChConfProfMaxDelayOctetSplit | read-create | current | The line configuration parameter MAXDELAYOCTET-split (MDOSPLIT) defines the percentage of the MAXDELAYOCTET_ext if operating in ITU-T G.998.4 or MAXDELAYOCTET … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.1.1.60 | ColumnhwVdslChConfProfMaxDelayVar | read-create | current | This optional XDSL specific parameter specifies the maximum value for the delay variation allowed in an OLR procedure. It is ranges from 1 to 254 units of 0.1 … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2 | TablehwXdslTR129ChConfProfileTable | not-accessible | current | The table hwXdslTR129ChConfProfileTable contains XDSL channel profile configuration. The index of this table is hwXdslTR129ChConfProfProfileName. A default pro… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1 | RowhwXdslTR129ChConfProfileEntry | not-accessible | current | The table hwXdslTR129ChConfProfileTable contains XDSL channel profile configuration. The index of this entry is hwXdslTR129ChConfProfProfileName. A default pro… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.1 | ColumnhwXdslTR129ChConfProfProfileName | accessible-for-notify | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.2 | ColumnhwXdslTR129ChConfProfMinDataRateDs | read-create | current | If retransmission is not used in downstream direction,this parameter specifics minimum data rate for the bearer channel on downstream direction. The rate is co… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.3 | ColumnhwXdslTR129ChConfProfMinDataRateUs | read-create | current | If retransmission is not used in upstream direction,this parameter specifics minimum data rate for the bearer channel on upstream direction. The rate is coded … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.4 | ColumnhwXdslTR129ChConfProfMinResDataRateDs | read-create | current | Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if t… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.5 | ColumnhwXdslTR129ChConfProfMinResDataRateUs | read-create | current | Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.6 | ColumnhwXdslTR129ChConfProfMaxDataRateDs | read-create | current | If retransmission is not used in downstream direction,this parameter specifics maximum data rate for the bearer channel on downstream direction. The rate is co… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.7 | ColumnhwXdslTR129ChConfProfMaxDataRateUs | read-create | current | If retransmission is not used in upstream direction,this parameter specifics maximum data rate for the bearer channel on upstream direction. The rate is coded … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.8 | ColumnhwXdslTR129ChConfProfMinDataRateLowPwrDs | read-create | current | Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.9 | ColumnhwXdslTR129ChConfProfMaxDelayDs | read-create | current | If retransmission is not used in downstream direction,this parameter is maximum interleave delay on downstream direction. The maximum one-way interleaving dela… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.10 | ColumnhwXdslTR129ChConfProfMaxDelayUs | read-create | current | If retransmission is not used in upstream direction,this parameter is maximum interleave delay on upstream direction. The maximum one-way interleaving delay in… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.11 | ColumnhwXdslTR129ChConfProfMinProtectionDs | read-create | current | If retransmission is not used in downstream direction,this parameter is minimum impulse noise protection for the bearer channel on downstream direction. The mi… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.12 | ColumnhwXdslTR129ChConfProfMinProtectionUs | read-create | current | If retransmission is not used in upstream direction,this parameter is minimum impulse noise protection for the bearer channel on upstream direction. The minimu… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.13 | ColumnhwXdslTR129ChConfProfUsDataRateDs | read-create | current | If retransmission is not used in downstream direction,this parameter is data rate threshold up-shift for downstream direction. An 'Up-shift rate change' event … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.14 | ColumnhwXdslTR129ChConfProfDsDataRateDs | read-create | current | If retransmission is not used in downstream direction,this parameter is data rate threshold down-shift for downstream direction. A 'Down-shift rate change' eve… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.15 | ColumnhwXdslTR129ChConfProfUsDataRateUs | read-create | current | If retransmission is not used in upstream direction,this parameter is data rate threshold up shift for upstream direction. An 'Up-shift rate change' event is t… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.16 | ColumnhwXdslTR129ChConfProfDsDataRateUs | read-create | current | If retransmission is not used in upstream direction,this parameter is data rate threshold down-shift for upstream direction. A 'Down-shift rate change' event i… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.17 | ColumnhwXdslTR129ChConfProfDataPathMode | read-create | current | The channel data path mode. Options: 1. atm(1) - ATM 2. ptm(2) - PTM 3. both(3) - ATM and PTM Huawei defined. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.18 | ColumnhwXdslTR129ChConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.19 | ColumnhwXdslTR129ChConfProfPhyRcontrolDs | read-create | current | To enable or disable the retransmission function. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.20 | ColumnhwXdslTR129ChConfProfPhyRcontrolUs | read-create | current | To enable or disable the retransmission function. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.21 | ColumnhwXdslTR129ChConfProfInpMaxDs | read-create | current | Maximum Impulse Noise Protection on downstream direction. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.22 | ColumnhwXdslTR129ChConfProfInpMaxUs | read-create | current | Maximum Impulse Noise Protection on upstream direction. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.23 | ColumnhwXdslTR129ChConfProfMinRtxRatioDs | read-create | current | This object is used to config the minimum retransmission band width parameter downstream. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.24 | ColumnhwXdslTR129ChConfProfMinRtxRatioUs | read-create | current | This object is used to config the minimum retransmission band width parameter upstream. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.25 | ColumnhwXdslTR129ChConfProfMinRSoverheadDs | read-create | current | This object is used to config the minimum RSoverhead parameter downstream.. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.26 | ColumnhwXdslTR129ChConfProfMinRSoverheadUs | read-create | current | This object is used to config the minimum RSoverhead parameter upstream.. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.27 | ColumnhwXdslTR129ChConfProfErasureDecoding | read-create | current | To enable or disable the erasure decoding of a channel. Options: 1. enable(1) 2. disable(2) |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.28 | ColumnhwXdslTR129ChConfProfMinSosBrDs | read-create | current | This parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The valid range of values is from 0 to 65535 K… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.29 | ColumnhwXdslTR129ChConfProfMinSosBrUs | read-create | current | This parameter specifies the minimum net data rate required for a valid SOS request in the upstream direction. The valid range of values is from 0 to 65535 Kbp… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.30 | ColumnhwXdslTR129ChConfProfMinEtrRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.31 | ColumnhwXdslTR129ChConfProfMinEtrRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of 1… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.32 | ColumnhwXdslTR129ChConfProfMaxEtrRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.33 | ColumnhwXdslTR129ChConfProfMaxEtrRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of 1… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.34 | ColumnhwXdslTR129ChConfProfMaxNdrRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the maximum net data rate for the bearer channel. The values range in steps of 1000… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.35 | ColumnhwXdslTR129ChConfProfMaxNdrRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the maximum net data rate for the bearer channel.The values range in steps of 1000 bi… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.36 | ColumnhwXdslTR129ChConfProfMaxDelayRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (s… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.37 | ColumnhwXdslTR129ChConfProfMaxDelayRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.38 | ColumnhwXdslTR129ChConfProfMinDelayRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (s… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.39 | ColumnhwXdslTR129ChConfProfMinDelayRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.40 | ColumnhwXdslTR129ChConfProfMinInpShineRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.41 | ColumnhwXdslTR129ChConfProfMinInpShineRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is tr… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.42 | ColumnhwXdslTR129ChConfProfMinInp8ShineRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.43 | ColumnhwXdslTR129ChConfProfMinInp8ShineRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is tr… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.44 | ColumnhwXdslTR129ChConfProfShineRatioRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.45 | ColumnhwXdslTR129ChConfProfShineRatioRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 i… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.46 | ColumnhwXdslTR129ChConfProfMinInpReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is t… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.47 | ColumnhwXdslTR129ChConfProfMinInpReinRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is tra… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.48 | ColumnhwXdslTR129ChConfProfMinInp8ReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is t… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.49 | ColumnhwXdslTR129ChConfProfMinInp8ReinRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is tra… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.50 | ColumnhwXdslTR129ChConfProfIatReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequ… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.51 | ColumnhwXdslTR129ChConfProfIatReinRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequen… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.52 | ColumnhwXdslTR129ChConfProfInitPolicy | read-create | current | This parameter indicates which policy shall be applied to determine the transceiver configuration parameters at initialization. The valid values for CIPOLICY a… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.53 | ColumnhwXdslTR129ChConfProfMaxDataRateLowPwrDs | read-create | current | Maximum Data Rate in Low Power state on Downstream direction. The maximum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.54 | ColumnhwXdslTR129ChConfProfL2MinDataRateToL0ActDataRateDs | read-create | current | The ratio between data rate in low power state and data rate in normal state. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.55 | ColumnhwXdslTR129ChConfProfMaxDelayOctetSplit | read-create | current | The line configuration parameter MAXDELAYOCTET-split (MDOSPLIT) defines the percentage of the MAXDELAYOCTET_ext if operating in ITU-T G.998.4 or MAXDELAYOCTET … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.56 | ColumnhwXdslTR129ChConfProfMaxDelayVar | read-create | current | This optional XDSL specific parameter specifies the maximum value for the delay variation allowed in an OLR procedure. It is ranges from 1 to 254 units of 0.1 … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.57 | ColumnhwXdslTR129ChConfProfGfastMinEtrDs | read-create | current | This parameter specifies the minimum expected throughput for the downstream bearer channel. The values range in steps of 1000 bit/s. Unit: bit/s |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.58 | ColumnhwXdslTR129ChConfProfGfastfMaxNdrDs | read-create | current | This parameter specifies the G.fast maximum net data rate for the downstream bearer channel. The values range in steps of 1000 bit/s. Unit: bit/s |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.59 | ColumnhwXdslTR129ChConfProfGfastUsDataRateDs | read-create | current | This parameter is a threshold on the G.fast net data rate up-shift achieved over one or more downstream bearer channel data rate adaptations. An up-shift rate … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.60 | ColumnhwXdslTR129ChConfProfGfastDsDataRateDs | read-create | current | This parameter is a threshold on the G.fast net data rate down-shift achieved over one or more bearer channel data rate adaptations. A down-shift rate change a… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.61 | ColumnhwXdslTR129ChConfProfGfastMinEtrUs | read-create | current | This parameter specifies the minimum expected throughput for the upstream bearer channel. The values range in steps of 1000 bit/s. Unit: bit/s |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.62 | ColumnhwXdslTR129ChConfProfGfastfMaxNdrUs | read-create | current | This parameter specifies the G.fast maximum net data rate for the upstream bearer channel. The values range in steps of 1000 bit/s. Unit: bit/s |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.63 | ColumnhwXdslTR129ChConfProfGfastUsDataRateUs | read-create | current | This parameter is a threshold on the G.fast net data rate up-shift achieved over one or more upstream bearer channel data rate adaptations. An up-shift rate ch… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.64 | ColumnhwXdslTR129ChConfProfGfastDsDataRateUs | read-create | current | This parameter is a threshold on the G.fast net data rate down-shift achieved over one or more upstream bearer channel data rate adaptations. A down-shift rate… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.65 | ColumnhwXdslTR129ChConfProfGfastMaxDelayRtxDs | read-create | current | This parameter specifies the G.fast downstream maximum allowed delay for retransmission. The delay values range from 1 to 63 ms in steps of 0.25 ms. Unit: 0.25… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.66 | ColumnhwXdslTR129ChConfProfGfastMaxDelayRtxUs | read-create | current | This parameter specifies the G.fast upstream maximum allowed delay for retransmission. The delay values range from 1 to 63 ms in steps of 0.25 ms. Unit: 0.25 m… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.67 | ColumnhwXdslTR129ChConfProfGfastMinInpShineRtxDs | read-create | current | This parameter specifies the G.fast downstream minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.68 | ColumnhwXdslTR129ChConfProfGfastMinInpShineRtxUs | read-create | current | This parameter specifies the G.fast upstream minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.69 | ColumnhwXdslTR129ChConfProfGfastShineRatioRtxDs | read-create | current | This parameter specifies the G.fast downstream SHINE ratio. The values range from 0 to 0.1 in increments of 0.001. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.70 | ColumnhwXdslTR129ChConfProfGfastShineRatioRtxUs | read-create | current | This parameter specifies the G.fast upstream SHINE ratio. The values range from 0 to 0.1 in increments of 0.001. |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.71 | ColumnhwXdslTR129ChConfProfGfastMinInpReinRtxDs | read-create | current | This parameter specifies the G.fast downstream minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.72 | ColumnhwXdslTR129ChConfProfGfastMinInpReinRtxUs | read-create | current | This parameter specifies the G.fast upstream minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.73 | ColumnhwXdslTR129ChConfProfGfastIatReinRtxDs | read-create | current | This parameter specifies the G.fast downstream inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival t… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.74 | ColumnhwXdslTR129ChConfProfGfastIatReinRtxUs | read-create | current | This parameter specifies the G.fast upstream inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival tim… |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.75 | ColumnhwXdslTR129ChConfProfGfastMinRNRatioRtxDs | read-create | current | This parameter specifies the G.fast downstream minimum Reed-Solomon RFEC/NFEC ratio. The ratio is computed as the number of redundancy bytes (RFEC) divided by … |
| 1.3.6.1.4.1.2011.6.115.1.5.2.2.1.76 | ColumnhwXdslTR129ChConfProfGfastMinRNRatioRtxUs | read-create | current | This parameter specifies the G.fast upstream minimum Reed-Solomon RFEC/NFEC ratio. The ratio is computed as the number of redundancy bytes (RFEC) divided by th… |
| 1.3.6.1.4.1.2011.6.115.1.5.3 | NodehwXdslProfileAlarmConf | |||
| 1.3.6.1.4.1.2011.6.115.1.5.3.1 | TablehwXdslLineAlarmConfTemplateTable | not-accessible | current | The table hwXdslLineAlarmConfTemplateTable contains XDSL line alarm configuration template. The index of this table is hwXdslLAlarmConfTempTemplateName. A defa… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.1.1 | RowhwXdslLineAlarmConfTemplateEntry | not-accessible | current | The table hwXdslLineAlarmConfTemplateTable contains XDSL line alarm configuration template. The index of this entry is hwXdslLAlarmConfTempTemplateName. A defa… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.1.1.1 | ColumnhwXdslLAlarmConfTempTemplateName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.3.1.1.2 | ColumnhwXdslLAlarmConfTempLineProfile | read-create | current | The value of this object identifies the row in the XDSL Line Thresholds Configuration Profile Table (hwXdslLineAlarmConfProfileTable) that applies to this XDSL… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.1.1.3 | ColumnhwXdslLAlarmConfTempChan1ConfProfile | read-create | current | The value of this object identifies the row in the XDSL2 Channel Thresholds Configuration Profile Table (hwXdslChAlarmConfProfileTable) that applies for XDSL b… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.1.1.4 | ColumnhwXdslLAlarmConfTempChan2ConfProfile | read-create | current | The value of this object identifies the row in the XDSL2 Channel Thresholds Configuration Profile Table (hwXdslChAlarmConfProfileTable) that applies for XDSL b… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.1.1.5 | ColumnhwXdslLAlarmConfTempChan3ConfProfile | read-create | current | The value of this object identifies the row in the XDSL2 Channel Thresholds Configuration Profile Table (hwXdslChAlarmConfProfileTable) that applies for XDSL b… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.1.1.6 | ColumnhwXdslLAlarmConfTempChan4ConfProfile | read-create | current | The value of this object identifies the row in the XDSL2 Channel Thresholds Configuration Profile Table (hwXdslChAlarmConfProfileTable) that applies for XDSL b… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.1.1.7 | ColumnhwXdslLAlarmConfTempRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2 | TablehwXdslLineAlarmConfProfileTable | not-accessible | current | The table hwXdslLineAlarmConfProfileTable contains XDSL2 line PM thresholds profiles. The index of this table is hwXdslLineAlarmConfProfileName. A default prof… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1 | RowhwXdslLineAlarmConfProfileEntry | not-accessible | current | The table hwXdslLineAlarmConfProfileTable contains XDSL2 line PM thresholds profiles. The index of this entry is hwXdslLineAlarmConfProfileName. A default prof… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.1 | ColumnhwXdslLineAlarmConfProfileName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.2 | ColumnhwXdslLineAlarmConfProfileXtucThresh15MinFecs | read-create | current | A threshold for the hwXdslPMLCurr15MFecs counter, when hwXdslPMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated count… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.3 | ColumnhwXdslLineAlarmConfProfileXtucThresh15MinEs | read-create | current | A threshold for the hwXdslPMLCurr15MEs counter, when hwXdslPMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.4 | ColumnhwXdslLineAlarmConfProfileXtucThresh15MinSes | read-create | current | A threshold for the hwXdslPMLCurr15MSes counter, when hwXdslPMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counte… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.5 | ColumnhwXdslLineAlarmConfProfileXtucThresh15MinLoss | read-create | current | A threshold for the hwXdslPMLCurr15MLoss counter, when hwXdslPMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated count… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.6 | ColumnhwXdslLineAlarmConfProfileXtucThresh15MinUas | read-create | current | A threshold for the hwXdslPMLCurr15MUas counter, when hwXdslPMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counte… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.7 | ColumnhwXdslLineAlarmConfProfileXturThresh15MinFecs | read-create | current | A threshold for the hwXdslPMLCurr15MFecs counter, when hwXdslPMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated count… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.8 | ColumnhwXdslLineAlarmConfProfileXturThresh15MinEs | read-create | current | A threshold for the hwXdslPMLCurr15MEs counter, when hwXdslPMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.9 | ColumnhwXdslLineAlarmConfProfileXturThresh15MinSes | read-create | current | A threshold for the hwXdslPMLCurr15MSes counter, when hwXdslPMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counte… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.10 | ColumnhwXdslLineAlarmConfProfileXturThresh15MinLoss | read-create | current | A threshold for the hwXdslPMLCurr15MLoss counter, when hwXdslPMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated count… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.11 | ColumnhwXdslLineAlarmConfProfileXturThresh15MinUas | read-create | current | A threshold for the hwXdslPMLCurr15MUas counter, when hwXdslPMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counte… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.12 | ColumnhwXdslLineAlarmConfProfileThresh15MinFailedFullInt | read-create | current | A threshold for the hwXdslPMLCurrInit15MfailedFullInits counter. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.13 | ColumnhwXdslLineAlarmConfProfileThresh15MinFailedShrtInt | read-create | current | A threshold for the hwXdslPMLCurrInit15MFailedShortInits counter. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.14 | ColumnhwXdslLineAlarmConfProfileRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.15 | ColumnhwXdslLineAlarmConfProfileThresh15MinFullInt | read-create | current | A threshold for the hwXdslPMLCurrInit15MFullInits counter. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.16 | ColumnhwXdslLineAlarmConfProfileXtucThresh15MinLeftrs | read-create | current | A threshold for the hwXdslPMLCurr15MLeftrs counter, when hwXdslPMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated cou… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.17 | ColumnhwXdslLineAlarmConfProfileXturThresh15MinLeftrs | read-create | current | A threshold for the hwXdslPMLCurr15MLeftrs counter, when hwXdslPMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated cou… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.18 | ColumnhwXdslLineAlarmConfProfileDyingGaspAlarmSwitch | read-create | current | This object enable/disable the report of LOSS-OF-POWER alarm in a XDSL line. Options: 1. enable(1) - The report of LOSS-OF-POWER alarm in a VDSL line is enable… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.19 | ColumnhwXdslLineAlarmConfProfileActiveFailAlarmSwitch | read-create | current | This object enable/disable the active fail alarm switch. Options: 1. enable(1) - The active fail alarm switch is enabled 2. disable(2) - The active fail alarm … |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.20 | ColumnhwXdslLineAlarmConfProfileRateChangeAlarmSwitch | read-create | current | This object enable/disable the active rate change alarm switch. Options: 1. enable(1) - The active rate change alarm switch is enabled 2. disable(2) - The acti… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.21 | ColumnhwXdslLineAlarmConfProfileLegacyCpeAlarmSwitch | read-create | current | This object enable/disable the legacy cpe alarm switch. Options: 1. enable(1) - The legacy cpe alarm switch is enabled 2. disable(2) - The legacy cpe alarm swi… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.22 | ColumnhwXdslLineAlarmConfProfileVictAbnormalVariationAlarmSwitch | read-create | current | This object enable/disable alarm switch that the port receives abnormal crosstalk. Options: 1. enable(1) - The alarm switch that the port receives abnormal cro… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.23 | ColumnhwXdslLineAlarmConfProfileDistAbnormalVariationAlarmSwitch | read-create | current | This object enable/disable the alarm switch that the port causes abnormal crosstalk. Options: 1. enable(1) - The alarm switch that the port causes abnormal cro… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.24 | ColumnhwXdslLineAlarmConfProfileReceivedESAbnormalAlarmSwitch | read-create | current | This object enable/disable the alarm switch that The port receives abnormal error sample messages. Options: 1. enable(1) - The alarm switch that the port recei… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.25 | ColumnhwXdslLineAlarmConfProfileNonVectoringCPEActivatedAlarmSwitch | read-create | current | This object enable/disable the alarm switch that the port is activated in none-vectoring mode. Options: 1. enable(1) - The alarm switch that the port is activa… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.26 | ColumnhwXdslLineAlarmConfProfileFreqRetrainReachThresholdAlarmSwitch | read-create | current | This object enable/disable the alarm switch that the port frequently retrain times in 15 minutes reach the threshold. Options: 1. enable(1) - The alarm switch … |
| 1.3.6.1.4.1.2011.6.115.1.5.3.2.1.27 | ColumnhwXdslLineAlarmConfProfilePSConfigAbnormalAlarmSwitch | read-create | current | This object enable/disable the pilot sequence configuration abnormal alarm switch. Options: 1. enable(1) - The pilot sequence configuration abnormal alarm swit… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.3 | TablehwXdslChAlarmConfProfileTable | not-accessible | current | The table hwXdslChAlarmConfProfileTable contains XDSL2 channel PM thresholds profiles. The index of this table is hwXdslChAlarmConfProfileName. A default profi… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.3.1 | RowhwXdslChAlarmConfProfileEntry | not-accessible | current | The table hwXdslChAlarmConfProfileTable contains XDSL2 channel PM thresholds profiles. The index of this entry is hwXdslChAlarmConfProfileName. A default profi… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.3.1.1 | ColumnhwXdslChAlarmConfProfileName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.3.3.1.2 | ColumnhwXdslChAlarmConfProfileXtucThresh15MinCodingViolations | read-create | current | A threshold for the hwXdslPMChCurr15MCodingViolations counter, when hwXdslPMChCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the as… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.3.1.3 | ColumnhwXdslChAlarmConfProfileXtucThresh15MinCorrected | read-create | current | A threshold for the hwXdslPMChCurr15MCorrectedBlocks counter, when hwXdslPMChCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the ass… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.3.1.4 | ColumnhwXdslChAlarmConfProfileXturThresh15MinCodingViolations | read-create | current | A threshold for the hwXdslPMChCurr15MCodingViolations counter, when hwXdslPMChCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the as… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.3.1.5 | ColumnhwXdslChAlarmConfProfileXturThresh15MinCorrected | read-create | current | A threshold for the hwXdslPMChCurr15MCorrectedBlocks counter, when hwXdslPMChCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the ass… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.3.1.6 | ColumnhwXdslChAlarmConfProfileMonitoringRateDs | read-create | current | The channel monitoring rate downstream. Huawei defined. When the value you set is larger than the value of the rate downstream defined in the channel profile, … |
| 1.3.6.1.4.1.2011.6.115.1.5.3.3.1.7 | ColumnhwXdslChAlarmConfProfileMonitoringRateUs | read-create | current | The channel monitoring rate upstream. Huawei defined. When the value you set is larger than the value of the rate upstream defined in the channel profile, it w… |
| 1.3.6.1.4.1.2011.6.115.1.5.3.3.1.8 | ColumnhwXdslChAlarmConfProfileRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.4 | NodehwXdslProfileTIMode | |||
| 1.3.6.1.4.1.2011.6.115.1.5.4.1 | TablehwXdslServProfTable | not-accessible | current | The table hwXdslServProfTable contains xDSL line service configuration. The index of this table is hwXdslServProfName. A default profile with an index of 'DEFV… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1 | RowhwXdslServProfEntry | not-accessible | current | The table hwXdslServProfTable contains xDSL line service configuration. The index of this entry is hwXdslServProfName. A default profile with an index of 'DEFV… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.1 | ColumnhwXdslServProfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.2 | ColumnhwXdslServProfDataPathMode | read-create | current | This parameter indicates the XDSL line data path modes. Options: 1. atm (1) - atm mode 2. ptm (2) - ptm mode |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.3 | ColumnhwXdslServProfBitSwapEnablingDs | read-create | current | Enables or disables the bit swap downstream of a line. Options: 1. enable(1) - Enable the bit swap downstream of a line 2. disable(2) - Disable the bit swap do… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.4 | ColumnhwXdslServProfBitSwapEnablingUs | read-create | current | Enables or disables the bit swap upstream of a line. Options: 1. enable(1) - Enable the bit swap upstream of a line. 2. disable(2) - Disable the bit swap upstr… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.5 | ColumnhwXdslServProfRaMode | read-create | current | The mode of operation of a rate-adaptive xTU-R in the transmit direction. Options: 1. manual (1) - No Rate-Adaptation. The initialization process attempts to s… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.6 | ColumnhwXdslServProfCh1Enabling | read-create | current | This parameter indicates whether the bearer 1 of XDSL line is enabling. Options: 1. enable(1) - Enable the bearer 1 of XDSL line. 2. disable(2) - Disable the b… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.7 | ColumnhwXdslServProfCh1MinDataRateDs | read-create | current | If retransmission is not used in downstream direction,this parameter specifics minimum data rate for the bearer channel on downstream direction. coded in bit/s… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.8 | ColumnhwXdslServProfCh1MinDataRateUs | read-create | current | If retransmission is not used in upstream direction,this parameter specifics minimum data rate for the bearer channel on upstream direction. coded in bit/s. Un… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.9 | ColumnhwXdslServProfCh1MinResDataRateDs | read-create | current | Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if t… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.10 | ColumnhwXdslServProfCh1MinResDataRateUs | read-create | current | Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.11 | ColumnhwXdslServProfCh1MaxDataRateDs | read-create | current | If retransmission is not used in downstream direction,this parameter specifics maximum data rate for the bearer channel on downstream direction. coded in bit/s… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.12 | ColumnhwXdslServProfCh1MaxDataRateUs | read-create | current | If retransmission is not used in upstream direction,this parameter specifics maximum data rate for the bearer channel on upstream direction. coded in bit/s. Un… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.13 | ColumnhwXdslServProfCh1MinDataRateLowPwrDs | read-create | current | Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s., during the low power state (L1… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.14 | ColumnhwXdslServProfCh1MinDataRateLowPwrUs | read-create | current | Minimum Data Rate in Low Power state on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 in… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.15 | ColumnhwXdslServProfCh1RaRatioDs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.16 | ColumnhwXdslServProfCh1RaRatioUs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #1 when performing rate adaptation on Upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.17 | ColumnhwXdslServProfCh2Enabling | read-create | current | This parameter indicates whether the bearer 2 of XDSL line is enabling. Options: 1. enable(1) - Enable the bearer 2 of XDSL line. 2. disable(2) - Disable the b… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.18 | ColumnhwXdslServProfCh2MinDataRateDs | read-create | current | Minimum Data Rate on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s. Unit: bits/second |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.19 | ColumnhwXdslServProfCh2MinDataRateUs | read-create | current | Minimum Data Rate on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s. Unit: bits/second |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.20 | ColumnhwXdslServProfCh2MinResDataRateDs | read-create | current | Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if t… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.21 | ColumnhwXdslServProfCh2MinResDataRateUs | read-create | current | Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bit/s. This parameter is used only if the… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.22 | ColumnhwXdslServProfCh2MaxDataRateDs | read-create | current | Maximum Data Rate on Downstream direction. The maximum net data rate for the bearer channel, coded in bit/s. Unit: bits/second |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.23 | ColumnhwXdslServProfCh2MaxDataRateUs | read-create | current | Maximum Data Rate on Upstream direction. The maximum net data rate for the bearer channel, coded in bit/s. Unit: bits/second |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.24 | ColumnhwXdslServProfCh2MinDataRateLowPwrDs | read-create | current | Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.25 | ColumnhwXdslServProfCh2MinDataRateLowPwrUs | read-create | current | Minimum Data Rate in Low Power state on Upstream direction. The minimum net data rate for the bearer channel, coded in bit/s, during the low power state (L1 in… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.26 | ColumnhwXdslServProfCh2RaRatioDs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on Downstream. The ratio re… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.27 | ColumnhwXdslServProfCh2RaRatioUs | read-create | current | Rate Adaptation Ratio. The ratio (in %) that should be taken into account for the bearer channel #2 when performing rate adaptation on Upstream. The ratio refe… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.28 | ColumnhwXdslServProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.29 | ColumnhwXdslServProfMinEtrRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.30 | ColumnhwXdslServProfMinEtrRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of 1… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.31 | ColumnhwXdslServProfMaxEtrRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.32 | ColumnhwXdslServProfMaxEtrRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the maximum expected throughput for the bearer channel.The values range in steps of 1… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.33 | ColumnhwXdslServProfMaxNdrRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the maximum net data rate for the bearer channel. The values range in steps of 1000… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.1.1.34 | ColumnhwXdslServProfMaxNdrRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the maximum net data rate for the bearer channel.The values range in steps of 1000 bi… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.2 | TablehwXdslSpectrumProfTable | not-accessible | current | The table hwXdslSpectrumProfTable contains XDSL line spectrum configuration. The index of this table is hwXdslSpectrumProfName. A default profile with an index… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.2.1 | RowhwXdslSpectrumProfEntry | not-accessible | current | The table hwXdslSpectrumProfTable contains XDSL line spectrum configuration. The index of this entry is hwXdslSpectrumProfName. A default profile with an index… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.2.1.1 | ColumnhwXdslSpectrumProfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.4.2.1.2 | ColumnhwXdslSpectrumProfXtuTransSysEna | read-create | current | xTU Transmission System Enabling (xTSE). A list of the different coding types enabled in this profile. It is coded in a bit-map representation with 1 or more b… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.2.1.3 | ColumnhwXdslSpectrumProfScMaskDs | read-create | current | Sub-carriers mask. A bitmap of 512 bits that allows masking up to 512 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCds) is set to '1… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.2.1.4 | ColumnhwXdslSpectrumProfScMaskUs | read-create | current | Sub-carriers mask. A bitmap of 64 bits that allows masking up to 64 downstream sub-carriers, depending on NSCds. If bit i (0 <= i < NSCus) is set to '1',… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.2.1.5 | ColumnhwXdslSpectrumProfVDSLtoneblackout | read-create | current | The subset of subcarrier mask that shall be used to mask the subcarriers. It is a string of bands consist of begin tone index and end tone index. for example :… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.2.1.6 | ColumnhwXdslSpectrumProfRfiBands | read-create | current | The subset of PSD mask breakpoints that shall be used to notch an RFI band. It is a string of bands consist of begin tone index and end tone index. for example… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.2.1.7 | ColumnhwXdslSpectrumProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.2.1.8 | ColumnhwXdslSpectrumProfRtxModeDs | read-create | current | The mode of operation of G.998.4 retransmission in downstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.2.1.9 | ColumnhwXdslSpectrumProfRtxModeUs | read-create | current | The mode of operation of G.998.4 retransmission in upstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998.4… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.2.1.10 | ColumnhwXdslSpectrumProfProfLeftrThreshDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fracti… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.2.1.11 | ColumnhwXdslSpectrumProfProfLeftrThreshUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3 | TablehwXdslSpectrumProfModeSpecTable | not-accessible | current | The table hwXdslSpectrumProfModeSpecTable extends the XDSL line configuration profile by XDSL Mode Specific parameters. A row in this table that has an index o… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1 | RowhwXdslSpectrumProfModeSpecEntry | not-accessible | current | The table hwXdslSpectrumProfModeSpecTable extends the XDSL line configuration profile by XDSL Mode Specific parameters. A row in this table that has an index o… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.1 | ColumnhwXdslSpectrumProfXdslMode | not-accessible | current | The xDSL Mode is a way of categorizing the various xDSL transmission modes into groups, each group (xDSL Mode) shares the same PSD configuration. There should … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.2 | ColumnhwXdslSpectrumProfMaxNomPsdDs | read-create | current | The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical val… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.3 | ColumnhwXdslSpectrumProfMaxNomPsdUs | read-create | current | The maximum nominal transmit PSD in the upstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical value… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.4 | ColumnhwXdslSpectrumProfMaxNomAtpDs | read-create | current | The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.5 | ColumnhwXdslSpectrumProfMaxNomAtpUs | read-create | current | The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 510 units of 0.1 dBm (0 to 255 p… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.6 | ColumnhwXdslSpectrumProfMaxAggRxPwrUs | read-create | current | The maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is such that this m… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.7 | ColumnhwXdslSpectrumProfPsdMaskDs | read-create | current | This configuration parameter defines the downstream PSD mask applicable at the U-C2 reference point. This MIB PSD mask may impose PSD restrictions in addition … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.8 | ColumnhwXdslSpectrumProfPsdMaskUs | read-create | current | This configuration parameter defines the upstream PSD mask applicable at the U R2 reference point. This MIB PSD mask may impose PSD restrictions in addition to… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.9 | ColumnhwXdslSpectrumProfUpsPsdMaskSelection | read-create | current | This configuration parameter defines which upstream PSD mask is enabled. This parameter is used only for Annexes J and M of ITU T Recs G.992.3 and G.992.5. As … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.10 | ColumnhwXdslSpectrumProfPmMode | read-create | current | Power management state enabling. Defines the power states the ATU-C or ATU-R may autonomously transition to on this line. Options: 1. allowTransitionsToIdle (0… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.11 | ColumnhwXdslSpectrumProfL0Time | read-create | current | This minimum time (in seconds) between an Exit from the L2 state and the next Entry into the L2 state. It ranges from 0 to 255 seconds. Unit: seconds |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.12 | ColumnhwXdslSpectrumProfL2Time | read-create | current | This minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 St… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.13 | ColumnhwXdslSpectrumProfL2Atpr | read-create | current | The maximum aggregate transmit power reduction (in dB) that can be performed at transition of L0 to L2 state or through a single Power Trim in the L2 state. Un… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.14 | ColumnhwXdslSpectrumProfL2Atprt | read-create | current | The total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at tr… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.3.1.15 | ColumnhwXdslSpectrumProfModeSpecRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.4 | TablehwXdslSpectrumProfSubProfTable | not-accessible | current | The table hwXdslSpectrumProfSubProfTable extends the XDSL line configuration profile by profile parameters. The indexes of this table are hwXdslSpectrumProfNam… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.4.1 | RowhwXdslSpectrumProfSubProfEntry | not-accessible | current | The table hwXdslSpectrumProfSubProfTable extends the XDSL line configuration profile by profile parameters. The indexes of this entry are hwXdslSpectrumProfNam… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.4.1.1 | ColumnhwXdslSpectrumProfSubProfiles | not-accessible | current | This configuration parameter contains the G.993.2 profiles to be allowed by the near-end xTU on this line. This object is defaulted Profile17a. |
| 1.3.6.1.4.1.2011.6.115.1.5.4.4.1.2 | ColumnhwXdslSpectrumProfSubProfilesWeight | read-create | current | This configuration parameter contains the G.993.2 profiles' weight to be allowed by the near-end xTU on this line. This object is defaulted priorityWeight1. |
| 1.3.6.1.4.1.2011.6.115.1.5.4.4.1.3 | ColumnhwXdslSpectrumProfPsdClassMask | read-create | current | (CLASSMASK). In order to reduce the number of configuration possibilities, the limit Power Spectral Density masks (see LIMITMASK) are grouped in PSD mask class… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.4.1.4 | ColumnhwXdslSpectrumProfPsdLimitMask | read-create | current | (LIMITMASK). This configuration parameter contains the G.993.2 limit PSD masks of the selected PSD mask class, enabled by the near-end xTU on this line for eac… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.4.1.5 | ColumnhwXdslSpectrumProfUs0PsdMask | read-create | current | This parameter contains the US0 PSD masks to be allowed by the near-end xTU on the line. This parameter is only defined for G.993.2 Annex A. It is represented … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.4.1.6 | ColumnhwXdslSpectrumProfUs0Disable | read-create | current | This configuration parameter indicates if the use of US0 is disabled for each limit PSD mask enabled in the LIMITMASK parameter. This object is defaulted Unuse… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.4.1.7 | ColumnhwXdslSpectrumProfSubProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.5 | TablehwXdslDpboProfTable | not-accessible | current | The table hwXdslDpboProfTable contains XDSL DPBO configuration. The index of this table is hwXdslDpboProfName. A default profile with an index of 'DEFVAL' will… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.5.1 | RowhwXdslDpboProfEntry | not-accessible | current | The table hwXdslDpboProfTable contains XDSL DPBO configuration. The index of this entry is hwXdslDpboProfName. A default profile with an index of 'DEFVAL' will… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.5.1.1 | ColumnhwXdslDpboProfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.4.5.1.2 | ColumnhwXdslDpboProfWkMdMask | read-create | current | This configuration parameter defines the current enabled DPBO working mode mask. DPBO working mode enabling:1-ADSL, 2-ADSL2+ 3-VDSL2. Options: 1. current enabl… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.5.1.3 | ColumnhwXdslDpboProfEpsd | read-create | current | This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number o… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.5.1.4 | ColumnhwXdslDpboProfEsel | read-create | current | This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.5.1.5 | ColumnhwXdslDpboProfEscm | read-create | current | This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency de… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.5.1.6 | ColumnhwXdslDpboProfMus | read-create | current | DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shal… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.5.1.7 | ColumnhwXdslDpboProfFmin | read-create | current | DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multip… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.5.1.8 | ColumnhwXdslDpboProfFmax | read-create | current | DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.5.1.9 | ColumnhwXdslDpboProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.5.1.65535 | ColumnhwXdslDpboProfEselMin | read-create | current | DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and XDSL provision of additional KV… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.6 | TablehwXdslUpboProfTable | not-accessible | current | The table hwXdslUpboProfTable contains XDSL upbo configuration. The index of this table is hwXdslUpboProfName. A default profile with an index of 'DEFVAL' will… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.6.1 | RowhwXdslUpboProfEntry | not-accessible | current | The table hwXdslUpboProfTable contains XDSL upbo configuration . The index of this entry is hwXdslUpboProfName. A default profile with an index of 'DEFVAL' wil… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.6.1.1 | ColumnhwXdslUpboProfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.4.6.1.2 | ColumnhwXdslUpboProfPsdBand | read-create | current | This parameter defines the UPBO reference PSD used to compute the upstream power back-off for each upstream band. A UPBOPSD defined for each band shall consist… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.6.1.3 | ColumnhwXdslUpboProfKl | read-create | current | This parameter defines the electrical loop length expressed in dB at 1MHz, kl0, configured by the CO-MIB. The value shall be coded as an unsigned 16 bit number… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.6.1.4 | ColumnhwXdslUpboProfKlf | read-create | current | This parameter is a flag that forces the VTU-R to use the electrical loop length of the CO-MIB (UPBOKL) to compute the UPBO. The value shall be forced if the f… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.6.1.5 | ColumnhwXdslUpboProfKlAuto | read-create | current | This parameter defines the mode in which kl0 is computed when HwXdslUpboKlf is auto. The value is defined as below: 1-max(kl0CO,kl0CPE) 2-min(kl0CO,kl0CPE) 3-k… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.6.1.6 | ColumnhwXdslUpboProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.6.1.65535 | ColumnhwXdslUpboProfBoostMode | read-create | current | This object indicates whether the equalized FEXT UPBO method is supported or not. Options: 1. disable(1) - The Equalized FEXT UPBO method is not supported 2. e… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.6.1.65536 | ColumnhwXdslUpboProfKl0RefBand | read-create | current | Octets 0+1 - length[1] Octets 2+3 - length[2] Octets 4+5 - length[3] Octets 6+7 - length[4] |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7 | TablehwXdslNoiseMarginProfTable | not-accessible | current | The table hwXdslNoiseMarginProfTable contains XDSL noise margin configuration. The index of this table is hwXdslNoiseMarginProfName. A default profile with an … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1 | RowhwXdslNoiseMarginProfEntry | not-accessible | current | The table hwXdslNoiseMarginProfTable contains XDSL noise margin configuration. The index of this entry is hwXdslNoiseMarginProfName. A default profile with an … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.1 | ColumnhwXdslNoiseMarginProfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.2 | ColumnhwXdslNoiseMarginProfTargetSnrmDs | read-create | current | The minimum Noise Margin the xTU-R receiver shall achieve, relative to the BER requirement for each of the downstream bearer channels, to successfully complete… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.3 | ColumnhwXdslNoiseMarginProfTargetSnrmUs | read-create | current | The minimum Noise Margin the xTU-C receiver shall achieve, relative to the BER requirement for each of the upstream bearer channels, to successfully complete i… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.4 | ColumnhwXdslNoiseMarginProfMaxSnrmDs | read-create | current | The maximum Noise Margin the xTU-R receiver shall try to sustain. If the Noise Margin is above this level, the xTU-R shall request that the xTU-C reduce the xT… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.5 | ColumnhwXdslNoiseMarginProfMaxSnrmUs | read-create | current | The maximum Noise Margin the xTU-C receiver shall try to sustain. If the Noise Margin is above this level, the xTU-C shall request that the xTU-R reduce the xT… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.6 | ColumnhwXdslNoiseMarginProfMinSnrmDs | read-create | current | The minimum Noise Margin the xTU-R receiver shall tolerate. If the noise margin falls below this level, the xTU-R shall request that the xTU-C increase the xTU… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.7 | ColumnhwXdslNoiseMarginProfMinSnrmUs | read-create | current | The minimum Noise Margin the xTU-C receiver shall tolerate. If the noise margin falls below this level, the xTU-C shall request that the xTU-R increase the xTU… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.8 | ColumnhwXdslNoiseMarginProfRaUsNrmDs | read-create | current | The Downstream Up-Shift Noise Margin value, to be used when hwXdslLineConfRaModeDs is set to DynamicRa. If the downstream noise margin is above this value and … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.9 | ColumnhwXdslNoiseMarginProfRaUsNrmUs | read-create | current | The Upstream Up-Shift Noise Margin value, to be used when hwXdslLineConfRaModeUs is set to DynamicRa. If the upstream noise margin is above this value and stay… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.10 | ColumnhwXdslNoiseMarginProfRaUsTimeDs | read-create | current | The Downstream Up-Shift Time Interval, to be used when hwXdslLineConfRaModeDs is set to DynamicRa. The interval of time that the downstream noise margin should… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.11 | ColumnhwXdslNoiseMarginProfRaUsTimeUs | read-create | current | The Upstream Up-Shift Time Interval, to be used when hwXdslLineConfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should stay abo… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.12 | ColumnhwXdslNoiseMarginProfRaDsNrmsDs | read-create | current | The Downstream Down-Shift Noise Margin value, to be used when hwXdslLineConfRaModeDs is set to DynamicRa. If the downstream noise margin is below this value an… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.13 | ColumnhwXdslNoiseMarginProfRaDsNrmsUs | read-create | current | The Upstream Down-shift Noise Margin value, to be used when hwXdslLineConfRaModeUs is set to DynamicRa. If the upstream noise margin is below this value and st… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.14 | ColumnhwXdslNoiseMarginProfRaDsTimeDs | read-create | current | The Downstream Down-shift Time Interval, to be used when hwXdslLineConfRaModeDs is set to DynamicRa. The interval of time the downstream noise margin should st… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.15 | ColumnhwXdslNoiseMarginProfRaDsTimeUs | read-create | current | The Upstream Down-Shift Time Interval, to be used when hwXdslLineConfRaModeUs is set to DynamicRa. The interval of time the upstream noise margin should stay b… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.16 | ColumnhwXdslNoiseMarginProfDsThresholdDs | read-create | current | Data Rate Threshold Down-shift for downstream direction. A 'Down-shift rate change' event is triggered when the actual downstream data rate is below the data r… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.17 | ColumnhwXdslNoiseMarginProfUsThresholdDs | read-create | current | Data Rate Threshold Up shift for downstream direction. An 'Up-shift rate change' event is triggered when the actual downstream data rate exceeds, by more than … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.18 | ColumnhwXdslNoiseMarginProfDsThresholdUs | read-create | current | Data Rate Threshold Down-shift for upstream direction. A 'Down-shift rate change' event is triggered when the actual upstream data rate is below the data rate … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.19 | ColumnhwXdslNoiseMarginProfUsThresholdUs | read-create | current | Data Rate Threshold Up shift for upstream direction. An 'Up-shift rate change' event is triggered when the actual upstream data rate exceeds, by more than the … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.7.1.20 | ColumnhwXdslNoiseMarginProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8 | TablehwXdslDelayInpProfTable | not-accessible | current | The table hwXdslDelayInpProfTable contains XDSL delay inp configuration. The index of this table is hwXdslDelayInpProfName. A default profile with an index of … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1 | RowhwXdslDelayInpProfEntry | not-accessible | current | The table hwXdslDelayInpProfTable contains XDSL delay inp configuration. The index of this entry is hwXdslDelayInpProfName. A default profile with an index of … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.1 | ColumnhwXdslDelayInpProfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.2 | ColumnhwXdslDelayInpProfForceINP | read-create | current | This parameter indicates that the framer settings of the bearer shall be selected such that the impulse noise protection computed according to the formula spec… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.3 | ColumnhwXdslDelayInpProfCh1MaxDelayDs | read-create | current | If retransmission is not used in downstream direction,this parameter is maximum interleave delay on downstream direction. The maximum one-way interleaving dela… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.4 | ColumnhwXdslDelayInpProfCh1MaxDelayUs | read-create | current | If retransmission is not used in upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choo… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.5 | ColumnhwXdslDelayInpProfCh1MinProtectionDs | read-create | current | If retransmission is not used in downstream direction,this parameter is minimum impulse noise protection for the bearer channel on downstream direction. The mi… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.6 | ColumnhwXdslDelayInpProfCh1MinProtectionUs | read-create | current | If retransmission is not used in upstream direction,this parameter is minimum impulse noise protection for the bearer channel on upstream direction. The minimu… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.7 | ColumnhwXdslDelayInpProfCh2MaxDelayDs | read-create | current | Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream direction. The XTUs shall choos… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.8 | ColumnhwXdslDelayInpProfCh2MaxDelayUs | read-create | current | Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream direction. The XTUs shall choose th… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.9 | ColumnhwXdslDelayInpProfCh2MinProtectionDs | read-create | current | Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.10 | ColumnhwXdslDelayInpProfCh2MinProtectionUs | read-create | current | Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can ta… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.11 | ColumnhwXdslDelayInpProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.12 | ColumnhwXdslDelayInpProfCh1PhyRcontrolDs | read-write | current | To enable or disable the retransmission function on downstream direction. |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.13 | ColumnhwXdslDelayInpProfCh1PhyRcontrolUs | read-write | current | To enable or disable the retransmission function on upstream direction. |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.14 | ColumnhwXdslDelayInpProfCh1INPmaxDs | read-write | current | Maximum Impulse Noise Protection on downstream direction. Options: 1. noProtection(1) 2. halfSymbol(2) 3. singleSymbol(3) 4. twoSymbols(4) 5. threeSymbols(5) 6… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.15 | ColumnhwXdslDelayInpProfCh1INPmaxUs | read-write | current | Maximum Impulse Noise Protection on upstream direction. Options: 1. noProtection(1) 2. halfSymbol(2) 3. singleSymbol(3) 4. twoSymbols(4) 5. threeSymbols(5) 6. … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.16 | ColumnhwXdslDelayInpProfCh1MinRtxRatioDs | read-write | current | Minimum rtxratio on downstream direction. Unit: 1/256 |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.17 | ColumnhwXdslDelayInpProfCh1MinRtxRatioUs | read-write | current | Minimum rtxratio on upstream direction. Unit: 1/256 |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.18 | ColumnhwXdslDelayInpProfCh1MinRSoverheadDs | read-write | current | The minimum value of R/N on downstream direction. Unit: 1/256 |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.19 | ColumnhwXdslDelayInpProfCh1MinRSoverheadUs | read-write | current | The minimum value of R/N on upstream direction. Unit: 1/256 |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.20 | ColumnhwXdslDelayInpProfCh2PhyRcontrolDs | read-write | current | To enable or disable the retransmission function on downstream direction. |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.21 | ColumnhwXdslDelayInpProfCh2PhyRcontrolUs | read-write | current | To enable or disable the retransmission function on upstream direction. |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.22 | ColumnhwXdslDelayInpProfCh2INPmaxDs | read-write | current | Maximum Impulse Noise Protection on downstream direction. Options: 1. noProtection(1) 2. halfSymbol(2) 3. singleSymbol(3) 4. twoSymbols(4) 5. threeSymbols(5) 6… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.23 | ColumnhwXdslDelayInpProfCh2INPmaxUs | read-write | current | Maximum Impulse Noise Protection on upstream direction. Options: 1. noProtection(1) 2. halfSymbol(2) 3. singleSymbol(3) 4. twoSymbols(4) 5. threeSymbols(5) 6. … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.24 | ColumnhwXdslDelayInpProfCh2MinRtxRatioDs | read-write | current | Minimum rtxratio on downstream direction. Unit: 1/256 |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.25 | ColumnhwXdslDelayInpProfCh2MinRtxRatioUs | read-write | current | Minimum rtxratio on upstream direction. Unit: 1/256 |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.26 | ColumnhwXdslDelayInpProfCh2MinRSoverheadDs | read-write | current | The minimum value of R/N on downstream direction. Unit: 1/256 |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.27 | ColumnhwXdslDelayInpProfCh2MinRSoverheadUs | read-write | current | The minimum value of R/N on upstream direction. Unit: 1/256 |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.28 | ColumnhwXdslDelayInpProfCh1MaxDelayRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (s… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.29 | ColumnhwXdslDelayInpProfCh1MaxDelayRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.30 | ColumnhwXdslDelayInpProfCh1MinDelayRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (s… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.31 | ColumnhwXdslDelayInpProfCh1MinDelayRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.32 | ColumnhwXdslDelayInpProfCh1MinInpShineRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.33 | ColumnhwXdslDelayInpProfCh1MinInpShineRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is tr… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.34 | ColumnhwXdslDelayInpProfCh1MinInp8ShineRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is … |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.35 | ColumnhwXdslDelayInpProfCh1MinInp8ShineRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is tr… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.36 | ColumnhwXdslDelayInpProfCh1ShineRatioRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.37 | ColumnhwXdslDelayInpProfCh1ShineRatioRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 i… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.38 | ColumnhwXdslDelayInpProfCh1MinInpReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is t… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.39 | ColumnhwXdslDelayInpProfCh1MinInpReinRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is tra… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.40 | ColumnhwXdslDelayInpProfCh1MinInp8ReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is t… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.41 | ColumnhwXdslDelayInpProfCh1MinInp8ReinRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is tra… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.42 | ColumnhwXdslDelayInpProfCh1IatReinRtxDs | read-create | current | If retransmission is used in downstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequ… |
| 1.3.6.1.4.1.2011.6.115.1.5.4.8.1.43 | ColumnhwXdslDelayInpProfCh1IatReinRtxUs | read-create | current | If retransmission is used in upstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequen… |
| 1.3.6.1.4.1.2011.6.115.1.5.5 | NodehwXdslGfastTddProfile | |||
| 1.3.6.1.4.1.2011.6.115.1.5.5.1 | TablehwXdslGfastConfTddProfTable | not-accessible | current | The table hwXdslGfastConfTddProfTable contains G.fast tdd-profile configuration. The index of this table is hwXdslGfastConfTddProfName. A default profile with … |
| 1.3.6.1.4.1.2011.6.115.1.5.5.1.1 | RowhwXdslGfastConfTddProfEntry | not-accessible | current | The table hwXdslGfastConfTddProfTable contains G.fast tdd-profile configuration. The index of this entry is hwXdslGfastConfTddProfName. A default profile with … |
| 1.3.6.1.4.1.2011.6.115.1.5.5.1.1.1 | ColumnhwXdslGfastConfTddProfName | accessible-for-notify | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.5.1.1.2 | ColumnhwXdslGfastConfTddProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.5.1.1.3 | ColumnhwXdslGfastConfTddProfSymbolNumPerTddFrame | read-write | current | The total number of symbol periods in a TDD frame. TDD frame lengths of Mf = 36 and Mf = 23 symbol periods shall be supported. |
| 1.3.6.1.4.1.2011.6.115.1.5.5.1.1.4 | ColumnhwXdslGfastConfTddProfSymbolNumPerTddFrameDs | read-write | current | The total number of symbol positions in a TDD frame allocated for downstream transmission. When Mf is 36, Mds values supported from 10 to 32. When Mf is 23, Md… |
| 1.3.6.1.4.1.2011.6.115.1.5.5.1.1.5 | ColumnhwXdslGfastConfTddProfTtrDs | read-write | current | A parameter received by the FTU-O with the TXOPds primitive, indicating that the first TTRds downstream symbol positions in the logical frame are allocated to … |
| 1.3.6.1.4.1.2011.6.115.1.5.5.1.1.6 | ColumnhwXdslGfastConfTddProfTtrUs | read-write | current | A parameter received by the FTU-O with the TXOPus primitive, indicating that the first TTRus upstream symbol positions in the logical frame are allocated to th… |
| 1.3.6.1.4.1.2011.6.115.1.5.5.1.1.7 | ColumnhwXdslGfastConfTddProfTbudgetDs | read-write | current | A parameter received by the FTU-O with the TXOPds primitive, indicating that the downstream transmission opportunity consists of a total of TBUDGETds symbol po… |
| 1.3.6.1.4.1.2011.6.115.1.5.5.1.1.8 | ColumnhwXdslGfastConfTddProfTbudgetUs | read-write | current | A parameter received by the FTU-O with the TXOPus primitive, indicating that the upstream transmission opportunity consists of a total of TBUDGETus symbol posi… |
| 1.3.6.1.4.1.2011.6.115.1.5.6 | NodehwXdslGfastProfileAlarmConf | |||
| 1.3.6.1.4.1.2011.6.115.1.5.6.1 | TablehwXdslGfastLineAlarmConfTemplateTable | not-accessible | current | The table hwXdslGfastLineAlarmConfTemplateTable contains G.fast line alarm configuration template. The index of this table is hwXdslGfastLAlarmConfTempTemplate… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.1.1 | RowhwXdslGfastLineAlarmConfTemplateEntry | not-accessible | current | The table hwXdslGfastLineAlarmConfTemplateTable contains G.fast line alarm configuration template. The index of this entry is hwXdslGfastLAlarmConfTempTemplate… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.1.1.1 | ColumnhwXdslGfastLAlarmConfTempTemplateName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.6.1.1.2 | ColumnhwXdslGfastLAlarmConfTempLineProfile | read-create | current | The value of this object identifies the row in the G.fast Line Thresholds Configuration Profile Table (hwXdslGfastLAlarmConfProfTable) that applies to this G.f… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.1.1.3 | ColumnhwXdslGfastLAlarmConfTempChanConfProfile | read-create | current | The value of this object identifies the row in the G.fast Channel Thresholds Configuration Profile Table (hwXdslGfastChAlarmConfProfileTable) that applies for … |
| 1.3.6.1.4.1.2011.6.115.1.5.6.1.1.4 | ColumnhwXdslGfastLAlarmConfTempRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2 | TablehwXdslGfastLAlarmConfProfTable | not-accessible | current | The table hwXdslGfastLAlarmConfProfTable contains G.fast line PM thresholds profiles. The index of this table is hwXdslGfastLAlarmConfProfName. A default profi… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1 | RowhwXdslGfastLAlarmConfProfEntry | not-accessible | current | The table hwXdslGfastLAlarmConfProfTable contains G.fast line PM thresholds profiles. The index of this entry is hwXdslGfastLAlarmConfProfName. A default profi… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.1 | ColumnhwXdslGfastLAlarmConfProfName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.2 | ColumnhwXdslGfastLAlarmConfProfXtucThresh15MinFecs | read-create | current | A threshold for the hwXdslPMLCurr15MFecs counter, when hwXdslPMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated count… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.3 | ColumnhwXdslGfastLAlarmConfProfXtucThresh15MinEs | read-create | current | A threshold for the hwXdslPMLCurr15MEs counter, when hwXdslPMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counter… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.4 | ColumnhwXdslGfastLAlarmConfProfXtucThresh15MinSes | read-create | current | A threshold for the hwXdslPMLCurr15MSes counter, when hwXdslPMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counte… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.5 | ColumnhwXdslGfastLAlarmConfProfXtucThresh15MinLoss | read-create | current | A threshold for the hwXdslPMLCurr15MLoss counter, when hwXdslPMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated count… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.6 | ColumnhwXdslGfastLAlarmConfProfXtucThresh15MinUas | read-create | current | A threshold for the hwXdslPMLCurr15MUas counter, when hwXdslPMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated counte… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.7 | ColumnhwXdslGfastLAlarmConfProfXturThresh15MinFecs | read-create | current | A threshold for the hwXdslPMLCurr15MFecs counter, when hwXdslPMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated count… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.8 | ColumnhwXdslGfastLAlarmConfProfXturThresh15MinEs | read-create | current | A threshold for the hwXdslPMLCurr15MEs counter, when hwXdslPMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counter… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.9 | ColumnhwXdslGfastLAlarmConfProfXturThresh15MinSes | read-create | current | A threshold for the hwXdslPMLCurr15MSes counter, when hwXdslPMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counte… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.10 | ColumnhwXdslGfastLAlarmConfProfXturThresh15MinLoss | read-create | current | A threshold for the hwXdslPMLCurr15MLoss counter, when hwXdslPMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated count… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.11 | ColumnhwXdslGfastLAlarmConfProfXturThresh15MinUas | read-create | current | A threshold for the hwXdslPMLCurr15MUas counter, when hwXdslPMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated counte… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.12 | ColumnhwXdslGfastLAlarmConfProfThresh15MinFailedFullInt | read-create | current | A threshold for the hwXdslPMLCurrInit15MfailedFullInits counter. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.13 | ColumnhwXdslGfastLAlarmConfProfThresh15MinFailedShrtInt | read-create | current | A threshold for the hwXdslPMLCurrInit15MFailedShortInits counter. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.14 | ColumnhwXdslGfastLAlarmConfProfRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.15 | ColumnhwXdslGfastLAlarmConfProfThresh15MinFullInt | read-create | current | A threshold for the hwXdslPMLCurrInit15MFullInits counter. The value 0 means that no threshold is specified for the associated counter. |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.16 | ColumnhwXdslGfastLAlarmConfProfXtucThresh15MinLeftrs | read-create | current | A threshold for the hwXdslPMLCurr15MLeftrs counter, when hwXdslPMLCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the associated cou… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.17 | ColumnhwXdslGfastLAlarmConfProfXturThresh15MinLeftrs | read-create | current | A threshold for the hwXdslPMLCurr15MLeftrs counter, when hwXdslPMLCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the associated cou… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.18 | ColumnhwXdslGfastLAlarmConfProfDyingGaspAlarmSwitch | read-create | current | This object enable/disable the report of LOSS-OF-POWER alarm in a G.fast line. Options: 1. enable(1) - The report of LOSS-OF-POWER alarm in a G.fast line is en… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.19 | ColumnhwXdslGfastLAlarmConfProfActiveFailAlarmSwitch | read-create | current | This object enable/disable the active fail alarm switch. Options: 1. enable(1) - The active fail alarm switch is enabled 2. disable(2) - The active fail alarm … |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.20 | ColumnhwXdslGfastLAlarmConfProfRateChangeAlarmSwitch | read-create | current | This object enable/disable the active rate change alarm switch. Options: 1. enable(1) - The active rate change alarm switch is enabled 2. disable(2) - The acti… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.21 | ColumnhwXdslGfastLAlarmConfProfLegacyCpeAlarmSwitch | read-create | current | This object enable/disable the legacy cpe alarm switch. Options: 1. enable(1) - The legacy cpe alarm switch is enabled 2. disable(2) - The legacy cpe alarm swi… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.22 | ColumnhwXdslGfastLAlarmConfProfVictAbnormalVariationAlarmSwitch | read-create | current | This object enable/disable alarm switch that the port receives abnormal crosstalk. Options: 1. enable(1) - The alarm switch that the port receives abnormal cro… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.23 | ColumnhwXdslGfastLAlarmConfProfDistAbnormalVariationAlarmSwitch | read-create | current | This object enable/disable the alarm switch that the port causes abnormal crosstalk. Options: 1. enable(1) - The alarm switch that the port causes abnormal cro… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.24 | ColumnhwXdslGfastLAlarmConfProfReceivedESAbnormalAlarmSwitch | read-create | current | This object enable/disable the alarm switch that The port receives abnormal error sample messages. Options: 1. enable(1) - The alarm switch that the port recei… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.25 | ColumnhwXdslGfastLAlarmConfProfNonVectoringCPEActivatedAlarmSwitch | read-create | current | This object enable/disable the alarm switch that the port is activated in none-vectoring mode. Options: 1. enable(1) - The alarm switch that the port is activa… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.26 | ColumnhwXdslGfastLAlarmConfProfFreqRetrainReachThresholdAlarmSwitch | read-create | current | This object enable/disable the alarm switch that the port frequently retrain times in 15 minutes reach the threshold. Options: 1. enable(1) - The alarm switch … |
| 1.3.6.1.4.1.2011.6.115.1.5.6.2.1.27 | ColumnhwXdslGfastLAlarmConfProfPSConfigAbnormalAlarmSwitch | read-create | current | This object enable/disable the pilot sequence configuration abnormal alarm switch. Options: 1. enable(1) - The pilot sequence configuration abnormal alarm swit… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.3 | TablehwXdslGfastChAlarmConfProfileTable | not-accessible | current | The table hwXdslGfastChAlarmConfProfileTable contains G.fast channel PM thresholds profiles. The index of this table is hwXdslGfastChAlarmConfProfileName. A de… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.3.1 | RowhwXdslGfastChAlarmConfProfileEntry | not-accessible | current | The table hwXdslGfastChAlarmConfProfileTable contains G.fast channel PM thresholds profiles. The index of this entry is hwXdslGfastChAlarmConfProfileName. A de… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.3.1.1 | ColumnhwXdslGfastChAlarmConfProfileName | not-accessible | current | This object identifies a row in this table. |
| 1.3.6.1.4.1.2011.6.115.1.5.6.3.1.2 | ColumnhwXdslGfastChAlarmConfProfileXtucThresh15MinCodingViolations | read-create | current | A threshold for the hwXdslPMChCurr15MCodingViolations counter, when hwXdslPMChCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the as… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.3.1.3 | ColumnhwXdslGfastChAlarmConfProfileXtucThresh15MinCorrected | read-create | current | A threshold for the hwXdslPMChCurr15MCorrectedBlocks counter, when hwXdslPMChCurrUnit is XTUC {1}. The value 0 means that no threshold is specified for the ass… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.3.1.4 | ColumnhwXdslGfastChAlarmConfProfileXturThresh15MinCodingViolations | read-create | current | A threshold for the hwXdslPMChCurr15MCodingViolations counter, when hwXdslPMChCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the as… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.3.1.5 | ColumnhwXdslGfastChAlarmConfProfileXturThresh15MinCorrected | read-create | current | A threshold for the hwXdslPMChCurr15MCorrectedBlocks counter, when hwXdslPMChCurrUnit is XTUR {2}. The value 0 means that no threshold is specified for the ass… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.3.1.6 | ColumnhwXdslGfastChAlarmConfProfileMonitoringRateDs | read-create | current | The channel monitoring rate downstream. Huawei defined. When the value you set is larger than the value of the rate downstream defined in the channel profile, … |
| 1.3.6.1.4.1.2011.6.115.1.5.6.3.1.7 | ColumnhwXdslGfastChAlarmConfProfileMonitoringRateUs | read-create | current | The channel monitoring rate upstream. Huawei defined. When the value you set is larger than the value of the rate upstream defined in the channel profile, it w… |
| 1.3.6.1.4.1.2011.6.115.1.5.6.3.1.8 | ColumnhwXdslGfastChAlarmConfProfileRowStatus | read-create | current | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting this object to 'active'. When '… |
| 1.3.6.1.4.1.2011.6.115.1.6 | NodehwXdslScalar | |||
| 1.3.6.1.4.1.2011.6.115.1.6.1 | NodehwXdslScalarSC | |||
| 1.3.6.1.4.1.2011.6.115.1.6.1.1 | ScalarhwXdslScalarSCMaxInterfaces | read-only | current | This value determines the maximum number of interfaces supported by hwXdslSCStatusTable, hwXdslSCStatusBandTable, and hwXdslSCStatusSegmentTable. |
| 1.3.6.1.4.1.2011.6.115.1.6.1.2 | ScalarhwXdslScalarSCAvailInterfaces | read-only | current | This value determines the currently available number of interfaces listed in hwXdslSCStatusTable, hwXdslSCStatusBandTable, and hwXdslSCStatusSegmentTable. |
| 1.3.6.1.4.1.2011.6.115.1.8 | NodehwXdslConformance | |||
| 1.3.6.1.4.1.2011.6.115.1.8.1 | NodehwXdslGroups | |||
| 1.3.6.1.4.1.2011.6.115.1.8.1.1 | GrouphwXdslLineGroup | current | The group of configuration, status, and commands objects on the line level. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.2 | GrouphwXdslChannelStatusGroup | current | The group of status objects on the channel level. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.3 | GrouphwXdslChannelStatusAtmGroup | current | The group of status objects on the data path level when it is ATM. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.4 | GrouphwXdslChannelStatusPtmGroup | current | The group of status objects on the data path level when it is PTM. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.5 | GrouphwXdslPrivSCStatusGroup | current | The group of status objects on the sub-carrier level. They are updated as a result of a DELT process. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.6 | GrouphwXdslDeltGroup | current | The group of status objects on the sub-carrier level. They are updated as a result of a DELT process. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.7 | GrouphwXdslLineInventoryGroup | current | The group of inventory objects per xTU. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.8 | GrouphwVdslLineConfTemplateGroup | current | The group of objects in a line configuration template. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.9 | GrouphwVdslLineConfProfGroup | current | The group of objects in a line configuration profile. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.10 | GrouphwVdslLineConfProfRaGroup | current | The group of objects required for controlling the rate adaptive behavior of the line. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.11 | GrouphwVdslLineConfProfMsgMinGroup | current | The group of objects required for controlling the rate reserved for Overhead traffic. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.12 | GrouphwVdslLineConfProfModeSpecGroup | current | The group of objects in a line configuration profile that have an instance for each operation mode allowed. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.13 | GrouphwVdslChConfProfileGroup | current | The group of objects in a channel configuration profile. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.14 | GrouphwVdslChConfProfileAtmGroup | current | The group of configuration objects required when the data path is ATM. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.15 | GrouphwVdslChConfProfileMinResGroup | current | The group of configuration objects required for the reserved data rate. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.16 | GrouphwXdslLineAlarmConfTemplateGroup | current | The group of objects in a line alarm template. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.17 | GrouphwXdslLineAlarmConfProfileGroup | current | The group of objects in a line alarm profile. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.18 | GrouphwXdslChAlarmConfProfileGroup | current | The group of objects in a channel alarm profile. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.19 | GrouphwXdslPMLineCurrGroup | current | The group of objects that report the line level counters for current PM intervals. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.20 | GrouphwXdslPMLineCurrInitGroup | current | The group of objects that report the full initializations counters for current PM intervals. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.21 | GrouphwXdslPMLineCurrInitShortGroup | current | The group of objects that report the short initializations counters for current PM intervals. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.22 | GrouphwXdslPMLineHist15MinGroup | current | The group of line level PM counters for the previous 15 minutes intervals. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.23 | GrouphwXdslPMLineHist1DayGroup | current | The group of line level PM counters for the previous 24 hours intervals. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.24 | GrouphwXdslPMLineInitHist15MinGroup | current | The group of PM counters for the previous 15 minutes intervals full initializations. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.25 | GrouphwXdslPMLineInitHist15MinShortGroup | current | The group of PM counters for the previous 15 minutes intervals short initializations. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.26 | GrouphwXdslPMLineInitHist1DayGroup | current | The group of PM counters for the previous 24 hours intervals full initializations. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.27 | GrouphwXdslPMLineInitHist1DayShortGroup | current | The group of PM counters for the previous 24 hours intervals short initializations. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.28 | GrouphwXdslPMChCurrGroup | current | The group of objects that report the channel level counters for current PM intervals. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.29 | GrouphwXdslPMChHist15MinGroup | current | The group of objects that report the channel level counters for previous 15 minutes PM intervals. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.30 | GrouphwXdslPMChHist1DGroup | current | The group of objects that report the channel level counters for previous 24 hours PM intervals. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.31 | GrouphwXdslScalarDeltGroup | current | The group of objects that report the available memory resources for DELT processes. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.32 | GrouphwXdslThreshNotificationGroup | current | This notification indicates alarm when this group supports notifications of significant conditions associated with XDSL2 lines. | |
| 1.3.6.1.4.1.2011.6.115.1.8.1.33 | GrouphwXdslStatusChangeNotificationGroup | current | This notification indicates alarm when this group supports notifications of thresholds crossing associated with XDSL2 lines. | |
| 1.3.6.1.4.1.2011.6.115.1.8.2 | NodehwXdslCompliances | |||
| 1.3.6.1.4.1.2011.6.115.1.8.2.1 | CompliancehwXdslLineMibCompliance | current | The compliance statement for SNMP entities which manage XDSL interfaces. | |
| 1.3.6.1.4.1.2011.6.115.1.9 | NodehwXdslMode | |||
| 1.3.6.1.4.1.2011.6.115.1.9.1 | ScalarhwVdslmodecfg | read-write | current | This object is used to change VDSL management mode. After the mode being changed, system will automatically save data and reboot. |
| 1.3.6.1.4.1.2011.6.115.1.9.2 | ScalarhwGfastModeCfg | read-write | current | This object is used to change G.fast management mode. After the mode being changed, system will automatically save data and reboot. Options: 1. tr165Mode(1) - … |
| 1.3.6.1.4.1.2011.6.115.1.10 | NodehwXdslGlobalConfig | |||
| 1.3.6.1.4.1.2011.6.115.1.10.1 | ScalarhwXdslDpboEselGlobalConfigSwitch | read-write | current | Enable/Disable XDSL port DPBOESEL shall Feature. This object is defaulted disabled(2). Options: 1. enabled(1) - enabled the switch 2. disabled(2) - disabled th… |
| 1.3.6.1.4.1.2011.6.115.1.10.2 | ScalarhwXdslDpboEselGlobalConfigValue | read-write | current | This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility poi… |
| 1.3.6.1.4.1.2011.6.115.1.10.3 | ScalarhwXdslProfileAutoNegotiationSwitch | read-write | current | Enable/Disable the VDSL2 G993.2 profile auto-negotiation function. Default values:disabled(2). Options: 1. enabled(1) - enabled the switch 2. disabled(2) - dis… |
| 1.3.6.1.4.1.2011.6.115.1.10.4 | ScalarhwXdslMaximumInterleavedDepth | read-write | current | Set the XDSL maximum interleaved depth function. Default values:maxInterleavedDepth511(2). Options: 1. maxInterleavedDepth64(1) - it means the interleaving dep… |
| 1.3.6.1.4.1.2011.6.115.1.10.5 | ScalarhwXdslGlobalConfigGfastRfiNotchSwitch | read-write | current | Enable/Disable the global G.fast RFI notch function. Default values:disabled(2). Options: 1. enabled(1) - enabled the switch 2. disabled(2) - disabled the swit… |
| 1.3.6.1.4.1.2011.6.115.1.10.6 | ScalarhwXdslGlobalConfigGfastRfiNotchBands | read-write | current | This configuration parameter defines the bands where the PSD shall be reduced as specified in ITU-T G.9701 #7.3.1.2. Each band shall be represented by a start … |
| 1.3.6.1.4.1.2011.6.115.1.10.7 | ScalarhwXdslGlobalConfigGfastIarNotchBands | read-write | current | Defines for each International Amateur Radio (IAR) band whether transmit PSD reduction is enabled or disabled in that band. It is represented as a bitmap (0 if… |
| 1.3.6.1.4.1.2011.6.115.1.10.8 | ScalarhwXdslGlobalConfigGfastRfiNotchDescription | read-write | current | The global G.fast RFI notch description. |
| 1.3.6.1.4.1.2011.6.115.1.10.9 | ScalarhwXdslVdsl2Profile35bFallbackConfigValue | read-write | current | When the port is configured profile35b and this port does not support profile35b on CPE,the configuration parameter contains the G.993.2 profile to be allowed … |
| 1.3.6.1.4.1.2011.6.115.1.11 | NodehwXdslCfgAutoDeleteProfUnused | |||
| 1.3.6.1.4.1.2011.6.115.1.11.1 | ScalarhwXdslAutoDeleteVdslProfUnusedProfType | read-write | current | The profile type of deleting unused VDSL profile. Options: 1. vdsl2LineConfTemplate(1) - VDSL2 line template 2. vdsl2LineConfProf(2) - VDSL2 line profile 3. vd… |
| 1.3.6.1.4.1.2011.6.115.1.11.2 | ScalarhwXdslAutoDeleteVdslProfUnusedOperType | read-write | current | The operation type of deleting unused XDSL profile. This object is defaulted all(2). Options: 1. first(1) - Delete first profile 2. all(2) - Delete all profile |
| 1.3.6.1.4.1.2011.6.115.1.12 | NodehwXdslGfastConf | |||
| 1.3.6.1.4.1.2011.6.115.1.12.1 | TablehwXdslGfastConfTable | not-accessible | current | The table hwXdslGfastConfTable contains frame configuration parameters of the G.fast tdd-profile name. The index of this table is hwFrameIndex. |
| 1.3.6.1.4.1.2011.6.115.1.12.1.1 | RowhwXdslGfastConfEntry | not-accessible | current | The table hwXdslGfastConfTable contains frame configuration parameters of the G.fast tdd-profile name. The index of this entry is hwFrameIndex. |
| 1.3.6.1.4.1.2011.6.115.1.12.1.1.1 | ColumnhwXdslGfastCnfgTddProfile | read-write | current | The value of this object identifies the row in the G.fast tdd-profile config table (hwXdslGfastConfTddProfTable), which applies to G.fast line. |
| 1.3.6.1.4.1.2011.6.115.1.15 | NodehwXdslCfgTraps | |||
| 1.3.6.1.4.1.2011.6.115.1.15.1 | NodehwXdslCfgCommonTraps | |||
| 1.3.6.1.4.1.2011.6.115.1.15.1.0 | NodehwXdslCfgCommonTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.1 | NotificationhwVdslModeSwitchTrap | current | VDSL mode switch trap. This trap message is generated when the XDSL line mode fails to be switched. | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.2 | NotificationhwVdslCurrentModeTrap | current | VDSL current mode trap. This trap message is generated when the current mode of the VDSL line is reported to the NMS periodically. | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.3 | NotificationhwXdslPortStatusChangeTrap | current | XDSL port status change trap. This trap message is generated when the port status changes, for example from up to down or from down to up.The parameter informa… | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.4 | NotificationhwXdslDeltOperResultTrap | current | XDSL delt trap. This trap message is generated when the result of the DELT performed on the XDSL line is reported. | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.5 | NotificationhwXdslTemplateIDChangeTrap | current | XDSL template change trap. This trap message is generated when the XDSL templete changed. | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.6 | NotificationhwVdslLConfTempTemplateChangeTrap | current | XDSL line template change trap. This trap message is generated when the XDSL line template changed. | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.7 | NotificationhwVdslLConfProfProfileChangeTrap | current | XDSL line profile change trap. This trap message is generated when the XDSL line profile changed. | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.8 | NotificationhwVdslChConfProfProfileChangeTrap | current | XDSL channel profile change trap. This trap message is generated when the XDSL channel profile changed. | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.9 | NotificationhwXdslGfastTddProfileChangeTrap | current | G.fast tdd-profile change trap. This trap message is generated when the G.fast tdd-profile changed. | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.10 | NotificationhwXdslGfastFrameTddProfileConfChangeTrap | current | This trap message is generated when the G.fast tdd-profile ID of the frame is changed. | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.11 | NotificationhwXdslTR129LineTemplateChangeTrap | current | G.Fast line template change trap. This trap message is generated when the G.Fast line template changed. | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.12 | NotificationhwXdslTR129LineProfileChangeTrap | current | G.fast line template change trap. This trap message is generated when the G.fast line template changed. | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.13 | NotificationhwXdslTR129ChannelProfileChangeTrap | current | G.fastline template change trap. This trap message is generated when the G.fast line template changed. | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.14 | NotificationhwGfastModeSwitchTrap | current | G.fast line mode switch trap. This trap message is generated when the G.fast line mode fails to be switched. | |
| 1.3.6.1.4.1.2011.6.115.1.15.1.0.15 | NotificationhwGfastCurrentModeTrap | current | G.fast current mode trap. This trap message is generated when the current mode of the G.fast line is reported to the NMS periodically. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2 | NodehwXdslCfgAlarmTraps | |||
| 1.3.6.1.4.1.2011.6.115.1.15.2.0 | NodehwXdslCfgAlarmTrapsPrefix | |||
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.1 | NotificationhwXdslAutoDeactivateLackLicensesCfgAlarmTrap | current | This trap message is generated when some xDSL ports or all the xDSL ports are automatically deactivated due to lack of licenses. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.2 | NotificationhwXdslPortAutoDeactiveLineFaultAlarmTrap | current | This trap message is generated when the XDSL port is automatically deactivated due to the line fault. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.3 | NotificationhwXdslPortReactiveAfterRecoverAlarmTrap | current | This trap message is generated when the XDSL port is re-activated after the XDSL line recovers. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.4 | NotificationhwXdslPerformanceStatiReachThresholdAlarmTrap | current | This trap message is generated when the line performance statistics of the XDSL port reach the threshold. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.5 | NotificationhwXdslDownstreamRateLowerThresholdAlarmTrap | current | This trap message is generated when the xDSL channel downstream rate is lower than the threshold. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.6 | NotificationhwXdslActivePortFailConfigParaAlarmTrap | current | This trap message is generated when it fails to activate the port by using the XDSL line configuration parameters. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.7 | NotificationhwXdslPerformanceStatisReachThresholdAlarmTrap | current | This trap message is generated when the channel performance statistics of the XDSL port reach the threshold. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.8 | NotificationhwXdslChannelUpstreamLowerThresholdAlarmTrap | current | This trap message is generated when the xDSL channel upstream rate is lower than the threshold. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.9 | NotificationhwXdslXTURPowerOffAlarmTrap | current | This trap message is generated when the VTU-R is powered off. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.10 | NotificationhwXdslPortActiveRateChangeAlarmTrap | current | This trap message is generated when the XDSL port actived rate change. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.11 | NotificationhwXdslChipsetUnavailableAlarmTrap | current | This trap message is generated when the XDSL chipset is unavailable. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.12 | NotificationhwXdslChipsetRecoverAlarmTrap | current | This trap message is generated when the XDSL chipset recovers from unavailability. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.13 | NotificationhwXdslChannelUpstreamExcThreAlarmTrap | current | This trap message is generated when the xDSL channel upstream rate increases to a value higher than the threshold. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.14 | NotificationhwXdslChannelUpstreamRestoreThreAlarmTrap | current | This trap message is generated when the xDSL channel upstream rate decreases to a value lower than the threshold. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.15 | NotificationhwXdslChannelDownstreamExcThreAlarmTrap | current | This trap message is generated when the xDSL channel downstream rate increases to a value higher than the threshold. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.16 | NotificationhwXdslChannelDownstreamRestoreThreAlarmTrap | current | This trap message is generated when the xDSL channel downstream rate decreases to a value lower than the threshold. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.17 | NotificationhwXdslUnSuppVectorPortActFailAlarmTrap | current | When the CPE connected to the port does not support vectoring and cannot be activated in 993.2 mode, this trap is sent. | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.18 | NotificationhwXdslVdsl2Profile35bFallbackFaultAlarmTrap | current | When G.993.2 profile fallback, such as configuring the profile35b, but the CPE only supports profile17a, and the CPE fallback to activate with profile17a, this… | |
| 1.3.6.1.4.1.2011.6.115.1.15.2.0.19 | NotificationhwXdslVdsl2Profile35bFallbackRecoveryAlarmTrap | current | When the CPE restore configuration G.993.2 profile to activate, this trap is send. | |
| 1.3.6.1.4.1.2011.6.115.1.16 | NodehwXdslCfgTrapsVbOids | |||
| 1.3.6.1.4.1.2011.6.115.1.16.1 | ScalarhwXdslLinePMThresholdItem | accessible-for-notify | current | Indicate the threshold item. |
| 1.3.6.1.4.1.2011.6.115.1.16.2 | ScalarhwXdslLinePMThresholdValue | accessible-for-notify | current | XDSL threshold value |
| 1.3.6.1.4.1.2011.6.115.1.16.3 | ScalarhwXdslPortActFailReason | accessible-for-notify | current | Indicate the the reason of the active port fail. |
| 1.3.6.1.4.1.2011.6.115.1.16.4 | ScalarhwXdslChPMThresholdItem | accessible-for-notify | current | Indicate the threshold value of threshold item . |
| 1.3.6.1.4.1.2011.6.115.1.16.5 | ScalarhwXdslChPMCurrentValue | accessible-for-notify | current | Indicate the current value of threshold item. |
| 1.3.6.1.4.1.2011.6.115.1.16.6 | ScalarhwXdslChPMThresholdValue | accessible-for-notify | current | Indicate the threshold value of threshold item. |
| 1.3.6.1.4.1.2011.6.115.1.16.7 | ScalarhwXdslLineActRateUs | accessible-for-notify | current | Indicate the line active data rate in the upstream direction. |
| 1.3.6.1.4.1.2011.6.115.1.16.8 | ScalarhwXdslLineActRateDs | accessible-for-notify | current | Indicate the line active data rate in the downstream direction. |
| 1.3.6.1.4.1.2011.6.115.1.16.9 | ScalarhwXdslChipsetID | accessible-for-notify | current | ChipsetID, the chipset id of the board. |
| 1.3.6.1.4.1.2011.6.115.1.16.10 | ScalarhwXdslModeSwitchResult | accessible-for-notify | current | XDSL mode switch result. Options: 1. success(0) - success 2. fail(1) - fail |
| 1.3.6.1.4.1.2011.6.115.1.16.11 | ScalarhwXdslLinePMCurrentValue | accessible-for-notify | current | Indicate the current value of threshold item. |
| 1.3.6.1.4.1.2011.6.115.1.16.12 | ScalarhwXdslCfgRequestID | accessible-for-notify | current | Request ID |
| 1.3.6.1.4.1.2011.6.115.1.16.13 | ScalarhwACTChngeDesc | accessible-for-notify | current | The XDSL port actived rate change description. |
| 1.3.6.1.4.1.2011.6.115.1.16.14 | ScalarhwXdslTemplateType | accessible-for-notify | current | Type of the XDSL profile ID. Options: 1. lineConfTemplate(1) - VDSL2 line template 2. alarmConfTemplate(2) - VDSL2 alarm template 3. spectrumProf(3) - VDSL2 sp… |
| 1.3.6.1.4.1.2011.6.115.1.16.15 | ScalarhwXdslProfOperType | accessible-for-notify | current | VDSL profile operate type. Options: 1.add(1) - Add a XDSL profile 2.modify(2) - Modify a XDSL profile 3.delete(3) - Delete a XDSL profile |
| 1.3.6.1.4.1.2011.6.115.1.16.16 | ScalarhwXdslPortAutoDeactiveLineRetrainInfo | accessible-for-notify | current | Indicate the last retrain info of the line. |
| 1.3.6.1.4.1.2011.6.115.1.16.17 | ScalarhwXdslLineVdsl2ProfileConfig | accessible-for-notify | current | Indicate the configuration G.993.2 profile. |
| 1.3.6.1.4.1.2011.6.115.1.16.18 | ScalarhwXdslLineVdsl2ProfileFallback | accessible-for-notify | current | Indicate the fallback G.993.2 profile. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HwXdslLineClockReferenceType | INTEGER { freeRun(1), system(2) } | current | The various clock references for the XDSL line. Options: 1. freeRun(1) - network timing reference clock mode is freeRun 2. system(2) - network timing reference clock mode is system |