MIB Viewer

IBM-ELAN-MIB

26 objects
No module-level DESCRIPTION found.
OIDNameAccessStatusDescription
1.3.6.1.4.1.2.6.118.1.2.1.4NodeibmElanMIB
1.3.6.1.4.1.2.6.118.1.2.1.4.1NodeibmElanAdminGroup
1.3.6.1.4.1.2.6.118.1.2.1.4.2NodeibmElanConfGroup
1.3.6.1.4.1.2.6.118.1.2.1.4.2.2TableibmElanLesTablenot-accessiblemandatoryThis table contains configuration information for the all LESs for each ELAN specified in the elanConfTable. This table is used by the LECS to know if a backup…
1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1RowibmElanLesEntrynot-accessiblemandatoryEach entry represents a LES/Emulated LAN pair this agent maintains.
1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1.1ColumnibmBackupLesAtmAddrValidread-writemandatoryWhen True specifies the backup LES is specified by ibmBackupLesAtmAddr. When False specifies no backup LES is configured.
1.3.6.1.4.1.2.6.118.1.2.1.4.2.2.1.2ColumnibmBackupLesAtmAddrread-writemandatoryThe ATM address of the backup LES.
1.3.6.1.4.1.2.6.118.1.2.1.4.3NodeibmElanLecsGroup
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1NodeibmElanLecsConfGroup
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1TableibmLecsConfTablenot-accessiblemandatoryThis table contains configuration information the LECSs within the scope of the agent.
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1RowibmLecsConfEntrynot-accessiblemandatoryEach entry represents a LECS this agent maintains. Objects lecsUseBurnedInEsi, lecsConfiguredEsi, and lecsConfiguredSelector cannot be modified unless the lecs…
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.1ColumnlecsUseBurnedInEsiread-writemandatorySpecifies whether a MAC Address burned into the ATM device should be used as the End System Identifier component of the LECS ATM Address.
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.2ColumnlecsConfiguredEsiread-writemandatoryLocally Administered End System Identifier that is to be used as the ESI component of the LECS's ATM Address.
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.3ColumnlecsConfiguredSelectorread-writemandatorySpecifies value to be used as Selector field component of LECS's ATM address.
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.4ColumnlecsValidateBestEffortPcrread-writemandatoryWhen false, Best Effort Configuration Direct VCCs will be accepted without regard to the signalled forward Peak Cell Rate (PCR). When true, Best Effort VCCs wi…
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.5ColumnconfigDirectMaxReservedBwread-writemandatoryDefines the maximum acceptable Sustained Cell Rate (SCR) for a Configuration Direct VCC; if SCR is not specified on the incoming call, then this parameter defi…
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.6ColumnatmDevLineSpeedread-onlymandatoryLine Speed of LECS ATM Device. This should not exposed to the user.
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.7ColumnidleVccTimeread-writemandatoryWhen the maximum number of VCCs is exceeded at the LECS, VCCs are released (see lecsMaxVccs). All active VCCs at the LECS are scanned. If a VCC has been inacti…
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.8ColumnlecsMaxVccsread-writemandatoryThis is the maximum number of simultaneous VCCs supported by the LECS. If this number is exceeded, then VCCs will be released (see idleVccTime).
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.9ColumnlecsDomainNameread-writemandatoryThis is the name to associate with the Domain of the LECS
1.3.6.1.4.1.2.6.118.1.2.1.4.4NodeibmElanMIBConformance
1.3.6.1.4.1.2.6.118.1.2.1.4.4.1NodeibmElanMIBGroups
1.3.6.1.4.1.2.6.118.1.2.1.4.4.1.1NodeibmElanCConfGroup
1.3.6.1.4.1.2.6.118.1.2.1.4.4.1.2NodeibmLecsCGroup
1.3.6.1.4.1.2.6.118.1.2.1.4.4.2NodeibmElanMIBCompliances
1.3.6.1.4.1.2.6.118.1.2.1.4.4.2.1NodeibmElanMIBCompliance