RAD-Webranger-MIB
134 objects
RAD MIB.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.11.7.2 | Identitywebranger | RAD MIB. | ||
| 1.3.6.1.4.1.164.11.7.2.1 | NodewrSysConfig | |||
| 1.3.6.1.4.1.164.11.7.2.1.1 | ScalarwrBraodcastCtrlCmd | read-write | current | This parameter is a command to the webranger CPU. It enables blocking or forwarding broadcast frames, which may cause a trigger to a connection. block (1) - bl… |
| 1.3.6.1.4.1.164.11.7.2.1.2 | ScalarwrFrSelfLearningMode | read-write | current | This parameter enables the webranger to learn the DLCi's configuration and maintanance protocol. off - will get the configuration by setting it. on - disables … |
| 1.3.6.1.4.1.164.11.7.2.1.3 | ScalarwrGratuitousArp | read-write | current | This parameter enables/disables the Gratuitous ARP feature. When enabled, the feature means: when receiving ARP with sender's Source IP Address that already ex… |
| 1.3.6.1.4.1.164.11.7.2.2 | NodewrIpRouterInfo | |||
| 1.3.6.1.4.1.164.11.7.2.2.1 | NodewrConfigIpDhcp | |||
| 1.3.6.1.4.1.164.11.7.2.2.1.1 | ScalarwrDhcpAction | read-write | current | Activating (disable/enable) DHCP server operation. Since DHCP Server and DHCP Relay cannot reside in same device, DHCP Relay may be enabled (per interface), on… |
| 1.3.6.1.4.1.164.11.7.2.2.1.2 | TablewrDhcpTable | not-accessible | current | A list of DHCP entries. The number of entries is up to DHCP current entries, according to the WEBRANger model. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1 | RowwrDhcpEntry | not-accessible | current | DHCP parameters per entry of the DHCP table. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.1 | ColumnwrDhcpLowIpAddress | read-only | current | DHCP Low Ip Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.2 | ColumnwrDhcpHighIpAddress | read-create | current | DHCP High Ip Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.3 | ColumnwrDhcpIpMaskAddress | read-create | current | IP mask Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.4 | ColumnwrDhcpDefaultGateway | read-create | current | Default Gateway's IP Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.5 | ColumnwrDhcpPrimaryDNS | read-create | current | Primary DNS. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.6 | ColumnwrDhcpSecondaryDNS | read-create | current | Secondary DNS. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.7 | ColumnwrDhcpInterface | read-create | current | The IP addresse allocation is done according to the interface type from which the DHCP request arrives. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.8 | ColumnwrDhcpRowStatus | read-create | current | This attribute allows to create/delete a row in this table. For creating a row, the NMS should set wrDhcpRowStatus.id = active(1). For destroying a row, the NM… |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.9 | ColumnwrDhcpIpAddressLeaseTime | read-create | current | Allocated IP Address lease time in seconds. A zero value specifies no time limitation. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.10 | ColumnwrDhcpPoolName | read-create | current | DHCP pool name - string with max length of 10 characters |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.11 | ColumnwrDhcpTftpServerIp | read-create | current | DHCP pool - TFTP-server IP Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.2.1.12 | ColumnwrDhcpConfigFileName | read-create | current | TFTP-name of the configuration File Name for DHCP pool. |
| 1.3.6.1.4.1.164.11.7.2.2.1.3 | TabledhcpPoolAllocTable | not-accessible | current | A list of DHCP Pool Allocation entries. Each entry (row) consist of a single IP Address belonging to DHCP pool whose lowest IP address is dhcpPoolAllocLowIpAdd… |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1 | RowdhcpPoolAllocEntry | not-accessible | current | DHCP Pool Allocation parameters per entry of the DHCP Pool Allocation table. |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1.1 | ColumndhcpPoolAllocLowIpAddress | read-only | current | Lowest IP address of this pool, value eqaul to wrDhcpLowIpAddress for the pool. |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1.2 | ColumndhcpPoolAllocLeasingIpAddress | read-only | current | Single IP Address belonging to dhcp pool whose Lowest Ip Address is dhcpPoolAllocLowIpAddress. This IP address may be offered for leasing or may be leased by H… |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1.3 | ColumndhcpPoolAllocMacAddress | read-only | current | MAC Address to which the IP address has been leased |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1.4 | ColumndhcpPoolAllocTimeLeft | read-only | current | IP address leasing time left in seconds |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1.5 | ColumndhcpPoolAllocFlags | read-only | current | These flags indicates status of each IP address. User may change value to free, via dhcpPoolAllocFreeCmd |
| 1.3.6.1.4.1.164.11.7.2.2.1.3.1.6 | ColumndhcpPoolAllocFreeCmd | read-write | current | Setting this attribute to On (3), will enforce the agent to Free this entry. The Agent will change the value of this MIB object to off(2) automatically, after … |
| 1.3.6.1.4.1.164.11.7.2.2.1.4 | TabledhcpRelayTable | not-accessible | current | A list of DHCP relay entries. |
| 1.3.6.1.4.1.164.11.7.2.2.1.4.1 | RowdhcpRelayEntry | not-accessible | current | DHCP Relay parameters per entry of the DHCP relay table. |
| 1.3.6.1.4.1.164.11.7.2.2.1.4.1.1 | ColumndhcpRelayAction | read-write | current | Setting this attribute to enable (3), will enable DHCP Relay action for this interface (Only if DHCP Server is disabled for device - wrDhcpAction=disable). dhc… |
| 1.3.6.1.4.1.164.11.7.2.2.1.4.1.2 | ColumndhcpRelayServerIpAddress | read-write | current | DHCP Server IP Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.4.1.3 | ColumndhcpRelayMaxHop | read-write | current | Maximum number of hops till DHCP Server. upper limit is 16 hops |
| 1.3.6.1.4.1.164.11.7.2.2.1.5 | ScalarwrDhcpPort | read-write | current | This parameter defines the port that DHCP flow will be actiavted. |
| 1.3.6.1.4.1.164.11.7.2.2.1.6 | TabledhcpClientTable | not-accessible | current | A list of DHCP client entries. |
| 1.3.6.1.4.1.164.11.7.2.2.1.6.1 | RowdhcpClientEntry | not-accessible | current | DHCP Client parameters per entry of the DHCP Client table. |
| 1.3.6.1.4.1.164.11.7.2.2.1.6.1.1 | ColumndhcpClientAction | read-write | current | This parameter default value is enable(3). Setting this attribute to disable (2), will disable DHCP Client action for this interface. This parameter can be cha… |
| 1.3.6.1.4.1.164.11.7.2.2.1.6.1.2 | ColumndhcpClientServerIpAddress | read-write | current | DHCP Server IP Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.6.1.3 | ColumndhcpClientLeaseExpirationTime | read-only | current | This parameter holds the time (in minutes) left until lease expiration. |
| 1.3.6.1.4.1.164.11.7.2.2.1.6.1.4 | ColumndhcpClientStatus | read-only | current | This parametr displays the DHCP status. |
| 1.3.6.1.4.1.164.11.7.2.2.1.7 | TabledhcpIfClientTable | not-accessible | current | DHCP client entries for each Interface. |
| 1.3.6.1.4.1.164.11.7.2.2.1.7.1 | RowdhcpIfClientEntry | not-accessible | current | DHCP Clients per entry of the DHCP Interface Client table. |
| 1.3.6.1.4.1.164.11.7.2.2.1.7.1.2 | ColumndhcpIfClientIpAddress | read-only | current | DHCP Client IP Address. |
| 1.3.6.1.4.1.164.11.7.2.2.1.7.1.3 | ColumndhcpIfClientRowStatus | read-create | current | The row status used for creating, modifying, and deleting instances of the columnar objects in the dhcpIfClientTable. For Vmux Devices, it will be possible onl… |
| 1.3.6.1.4.1.164.11.7.2.2.1.8 | ScalardhcpServerAction | read-write | current | This variable enables the operator to perform one of the specified actions on the Server. deleteAllClients (3) is an option that is used for a device functioni… |
| 1.3.6.1.4.1.164.11.7.2.2.1.9 | TabledhcpClientNTable | not-accessible | current | The DHCP Client table (New). The number of entries is determined by the number of router interface in the system. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1 | RowdhcpClientNEntry | not-accessible | current | An entry of this table. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.1 | ColumndhcpClientIndex | not-accessible | current | The DHCP Client index. Index can be ifIndex and/or index of a router interface or host. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.2 | ColumndhcpClientAdminStatus | read-write | current | The Administrative Status of DHCP client. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.3 | ColumndhcpClientOperStatus | read-only | current | The Operational Status of DHCP client. notHoldingLease: No IP address is allocated in the router interface holdingLease: The router interface has a valid lease… |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.4 | ColumndhcpClientAddressType | read-write | current | The Address Type of all InetAddress objects. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.5 | ColumndhcpClientAddress | read-only | current | The DHCP Client Address, which is assigned by the DHCP server. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.6 | ColumndhcpClientAddressMask | read-only | current | The DHCP Client Address Mask, which is assigned by the DHCP server. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.7 | ColumndhcpClientNextHop | read-only | current | The Next Hop (Default Gateway) of the DHCP client. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.8 | ColumndhcpClientServerAddress | read-write | current | The DHCP Server Address. Although object is defined as read-write, current support is read-only. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.9 | ColumndhcpClientActualLeaseTime | read-only | current | The Actual Lease Time (for Address received from the server), measured in seconds. Value=FFFFFFFF represents an infinite actual lease time. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.10 | ColumndhcpClientRemainLeaseTime | read-only | current | The Remaining Lease Time (for Address received from the server), measured in seconds. Value=FFFFFFFF represents an infinite remaining lease time. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.11 | ColumndhcpClientCommand | read-write | current | The possible commands of DHCP client to DHCP server. Upon performing a command, value should be automatically returned to off(2). |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.12 | ColumndhcpClientOpAdminStatus | read-write | current | The Administrative Status of the different options. Bit=1 means that respective option is enabled/activated. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.13 | ColumndhcpClientOpVendorClassId | read-write | current | The Vendor Class Identifier. Identifier should include at least 1 character. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.14 | ColumndhcpClientOpIpAddrLeaseTime | read-write | current | The IP Address Lease Time, measured in seconds. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.15 | ColumndhcpClientOpServerId | read-write | current | The Server Identifier (reported IP Address). |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.16 | ColumndhcpClientOpClientIdType | read-write | current | Client Identifier type (the ID itself is set in dhcpClientOpClientId). 0 - user-configured identifier. 1 - Device MAC. 255 - RAD ID default identifier |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.17 | ColumndhcpClientOpClientId | read-write | current | The Client Identifier. Identifier should include at least 1 character. When dhcpClientOpClientIdType=1 it means that current object is irrelevant and shall be … |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.18 | ColumndhcpClientOpHostName | read-write | current | The Host Name. Name should include at least 1 character. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.19 | ColumndhcpClientOpDns | read-only | current | The Domain Name Server (DNS), which is a list of servers available to the client. This object should include at least 4 octets and must always be a multiple of… |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.20 | ColumndhcpClientOpTftpServerName | read-only | current | The TFTP Server Name. Name should include at least 1 character. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.21 | ColumndhcpClientOpBootFileName | read-only | current | The Boot File Name. Name should include at least 1 character. |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.22 | ColumndhcpClientLeaseObtainTime | read-only | current | The Lease Obtainment Time (composed of date and time). |
| 1.3.6.1.4.1.164.11.7.2.2.1.9.1.23 | ColumndhcpClientLeaseExpireTime | read-only | current | The Lease Expiration Time (composed of date and time). |
| 1.3.6.1.4.1.164.11.7.2.2.1.10 | TabledhcpReceivedOptionTable | not-accessible | current | The table holds an DHCP option data that arrived from an DHCP server.The DHCP request is defined in dhcpClientNTable. |
| 1.3.6.1.4.1.164.11.7.2.2.1.10.1 | RowdhcpReceivedOptionEntry | not-accessible | current | An entry of this table represents the DHCP options received from the DHCP server. |
| 1.3.6.1.4.1.164.11.7.2.2.1.10.1.1 | ColumndhcpReceivedOptionClientIndex | not-accessible | current | This object represents the unique identifier of the router interface. The value shall be equal to dhcpClientIndex and rtrIfCfgIndex. |
| 1.3.6.1.4.1.164.11.7.2.2.1.10.1.2 | ColumndhcpReceivedOptionNumber | not-accessible | current | An index value that uniquely identifies the received DHCP option number. |
| 1.3.6.1.4.1.164.11.7.2.2.1.10.1.3 | ColumndhcpReceivedOptionInput | read-only | current | The DHCP information that was received from the DHCP server. |
| 1.3.6.1.4.1.164.11.7.2.2.1.12 | Tabledhcpv6ClientTable | not-accessible | current | The DHCPv6 Client table. The number of entries is determined by the number of router interface in the system. |
| 1.3.6.1.4.1.164.11.7.2.2.1.12.1 | Rowdhcpv6ClientEntry | not-accessible | current | DHCPv6 client entry. |
| 1.3.6.1.4.1.164.11.7.2.2.1.12.1.1 | Columndhcpv6ClientIndex | not-accessible | current | The DHCPv6 Client index. Index can be ifIndex and/or index of a router interface or host. |
| 1.3.6.1.4.1.164.11.7.2.2.1.12.1.2 | Columndhcpv6ClientIndex2 | not-accessible | current | DHCPv6 Client second index for case where getting multiple parameters of the same type. |
| 1.3.6.1.4.1.164.11.7.2.2.1.12.1.3 | Columndhcpv6ClientAddressType | read-only | current | The Address Type of all InetAddress objects. |
| 1.3.6.1.4.1.164.11.7.2.2.1.12.1.4 | Columndhcpv6ClientAddress | read-only | current | The DHCPv6 Client Address, which is assigned by the DHCPv6 server. |
| 1.3.6.1.4.1.164.11.7.2.2.1.12.1.5 | Columndhcpv6ClientPrefixLength | read-only | current | The DHCPv6 Client Address prefix length, which is assigned by the DHCPv6 server. |
| 1.3.6.1.4.1.164.11.7.2.2.1.12.1.6 | Columndhcpv6ClientServerDuid | read-only | current | The DHCPv6 Server DUID. |
| 1.3.6.1.4.1.164.11.7.2.2.1.13 | Tabledhcpv6ReceivedOptionTable | not-accessible | current | The table holds DHCPv6 option data that arrived from a DHCPv6 server.The DHCPv6 request is defined in dhcpv6ClientTable. |
| 1.3.6.1.4.1.164.11.7.2.2.1.13.1 | Rowdhcpv6ReceivedOptionEntry | not-accessible | current | An entry of this table represents the DHCPv6 options received from the DHCPv6 server. |
| 1.3.6.1.4.1.164.11.7.2.2.1.13.1.1 | Columndhcpv6ClientOptionIndex | not-accessible | current | DHCPv6 Client option index for case where getting multiple options or sub-options of the same type. |
| 1.3.6.1.4.1.164.11.7.2.2.1.13.1.2 | Columndhcpv6ReceivedOptionNumber | not-accessible | current | An index value that uniquely identifies the received DHCPv6 option number. |
| 1.3.6.1.4.1.164.11.7.2.2.1.13.1.3 | Columndhcpv6ReceivedSubOptionNumber | not-accessible | current | An index value that uniquely identifies the received DHCPv6 sub-option number. |
| 1.3.6.1.4.1.164.11.7.2.2.1.13.1.4 | Columndhcpv6ReceivedOptionInput | read-only | current | The DHCPv6 information that was received from the DHCPv6 server. |
| 1.3.6.1.4.1.164.11.7.2.2.2 | NodewrConfigIpDNS | |||
| 1.3.6.1.4.1.164.11.7.2.2.2.1 | ScalarwrDNSRelayAction | read-write | current | When Enabled, device will act as a DNS Relay: whenever the device receives a DNS request from its host, it will forward it to the DNS server as if the request … |
| 1.3.6.1.4.1.164.11.7.2.3 | NodewrConfigIpxRouterInfo | |||
| 1.3.6.1.4.1.164.11.7.2.3.1 | ScalarwrAutoLearnLanIpxNets | read-write | current | Activating (disable/enable) the auto-learn operation. |
| 1.3.6.1.4.1.164.11.7.2.3.2 | TablewrLanIpxNetTable | not-accessible | current | Lan IPX nets Table. |
| 1.3.6.1.4.1.164.11.7.2.3.2.1 | RowwrLanIpxNetEntry | not-accessible | current | IPX Nets per frame type & LAN port. The table entries will be created by the agent |
| 1.3.6.1.4.1.164.11.7.2.3.2.1.1 | ColumnwrLanifIndex | read-only | current | LAN port ifIndex. |
| 1.3.6.1.4.1.164.11.7.2.3.2.1.2 | ColumnwrLanIpxFrameType | read-only | current | Frame Type |
| 1.3.6.1.4.1.164.11.7.2.3.2.1.3 | ColumnwrIpxNetAddress | read-write | current | Net address per Frame Type & LAN port. |
| 1.3.6.1.4.1.164.11.7.2.3.3 | ScalarwrDialInIpxNet | read-write | current | Net address through a link. |
| 1.3.6.1.4.1.164.11.7.2.3.4 | TableripSapIfConfTable | not-accessible | current | A list of Interfaces which require separate configuration in RIP/SAP. |
| 1.3.6.1.4.1.164.11.7.2.3.4.1 | RowripSapIfConfEntry | not-accessible | current | A Single Routing Domain in a single Subnet. |
| 1.3.6.1.4.1.164.11.7.2.3.4.1.1 | ColumnripSapIfConfIfIndex | read-only | current | The interface ifIndex. |
| 1.3.6.1.4.1.164.11.7.2.3.4.1.2 | ColumnripSapIfConfMode | read-create | current | The ifIndex RIP/SAP mode. |
| 1.3.6.1.4.1.164.11.7.2.3.4.1.3 | ColumnripSapIfConfStatus | read-create | current | This attribute allows to create/delete a row in this table. For creating a row, the NMS should set ripSapIfConfStatus.id1 = active(1). For destroying a row, th… |
| 1.3.6.1.4.1.164.11.7.2.4 | NodewrInterface | |||
| 1.3.6.1.4.1.164.11.7.2.4.1 | TablewrIpAddressTable | not-accessible | current | Link IP addresses Table. |
| 1.3.6.1.4.1.164.11.7.2.4.1.1 | RowwrIpAddressEntry | not-accessible | current | Ip Address per Link |
| 1.3.6.1.4.1.164.11.7.2.4.1.1.1 | ColumnwrIpIfIndex | read-only | current | Port interface index. |
| 1.3.6.1.4.1.164.11.7.2.4.1.1.2 | ColumnwrIpAddress | read-create | current | Link IP Address. |
| 1.3.6.1.4.1.164.11.7.2.4.1.1.3 | ColumnwrIpMask | read-create | current | Link IP mask Address. |
| 1.3.6.1.4.1.164.11.7.2.4.1.1.4 | ColumnwrIpRowStatus | read-create | current | This attribute allows to create/delete a row in this table. For creating a row, the NMS should set wrIpRowStatus.id1 = active(1). For destroying a row, the NMS… |
| 1.3.6.1.4.1.164.11.7.2.4.2 | TablewrSpoofingTable | not-accessible | current | Spoofing Table. |
| 1.3.6.1.4.1.164.11.7.2.4.2.1 | RowwrSpoofingEntry | not-accessible | current | Spoofing per Link |
| 1.3.6.1.4.1.164.11.7.2.4.2.1.1 | ColumnwrSpoofingIfIndex | read-only | current | Port interface index. |
| 1.3.6.1.4.1.164.11.7.2.4.2.1.2 | ColumnwrSpoofingAction | read-create | current | |
| 1.3.6.1.4.1.164.11.7.2.4.2.1.3 | ColumnwrSpoofingAgingStation | read-create | current | |
| 1.3.6.1.4.1.164.11.7.2.4.2.1.4 | ColumnwrSpoofingRowStatus | read-create | current | This attribute allows to create/delete a row in this table. For creating a row, the NMS should set wrSpoofingRowStatus.id1 = active(1). For destroying a row, t… |
| 1.3.6.1.4.1.164.11.7.2.4.3 | TablewrLanIfTable | not-accessible | current | Link IP addresses Table. |
| 1.3.6.1.4.1.164.11.7.2.4.3.1 | RowwrLanIfEntry | not-accessible | current | Ip Address per Link |
| 1.3.6.1.4.1.164.11.7.2.4.3.1.1 | ColumnwrLanIfIndex | read-only | current | Port interface index. |
| 1.3.6.1.4.1.164.11.7.2.4.3.1.2 | ColumnwrLanBridgeRouterMode | read-write | current | This parameter indicates whether the link is Bridge or Router and specifies the Router's type. |
| 1.3.6.1.4.1.164.11.7.2.4.3.1.3 | ColumnwrLanIfState | read-write | current | The LAN is disabled or enabled. For LAN 2 it can be also 'redundancy'. |
| 1.3.6.1.4.1.164.11.7.2.4.3.1.4 | ColumnwrLanIfRdnTimeout | read-write | current | LAN Redundancy Timeout in seconds. Applicable when wrLanIfState=redundancy. |
| 1.3.6.1.4.1.164.11.7.2.4.4 | TablewrSyncCnfgTable | not-accessible | current | Configuration table for Async interface. |
| 1.3.6.1.4.1.164.11.7.2.4.4.1 | RowwrSyncCnfgEntry | not-accessible | current | Configuration table |
| 1.3.6.1.4.1.164.11.7.2.4.4.1.1 | ColumnwrSyncIfIndex | read-only | current | Sync interface index. |
| 1.3.6.1.4.1.164.11.7.2.4.4.1.2 | ColumnwrSyncClkMode | read-write | current | Clock Mode. |
| 1.3.6.1.4.1.164.11.7.2.4.4.1.3 | ColumnwrSyncClkRate | read-write | current | Clock Rate in. Rate can be changed if Clock Mode is Program only. |
| 1.3.6.1.4.1.164.11.7.2.4.5 | TablewrFrCnfgTable | not-accessible | current | Configuration table for Fr parameters that do not exist in RFC2115. |
| 1.3.6.1.4.1.164.11.7.2.4.5.1 | RowwrFrCnfgEntry | not-accessible | current | Configuration entry for Fr parameters that do not exist in RFC2115. |
| 1.3.6.1.4.1.164.11.7.2.4.5.1.1 | ColumnwrFrDlciLearningMode | read-write | current | This parameter enables the webranger to learn the DLCi's configuration and maintanance protocol for the current interface. off - the WR will read the user's co… |
| 1.3.6.1.4.1.164.11.7.2.4.5.1.2 | ColumnwrFrCllmMessages | read-write | current | This parameter enables/disables the Webranger to Tx/Rx CLLM (Consolidated Link Layer Management) messages via DLCI 1023. The CLLM messages are link layer contr… |