MIB Viewer

ZYXEL-IES5000-MIB

3486 objects
ZyXEL Private MIB
Imported Objects
BRIDGE-MIBBridgeId dot1dBasePort MacAddress Timeout
IEEE8021-CFM-MIBdot1agCfmMaIndex dot1agCfmMdIndex dot1agCfmMdMdLevel dot1agCfmMepIdentifier dot1agCfmVlanPrimaryVid
IF-MIBInterfaceIndex
INET-ADDRESS-MIBInetAddress InetAddressType
P-BRIDGE-MIBdot1dTrafficClass EnabledStatus
Q-BRIDGE-MIBdot1qVlanIndex PortList VlanIndex
RFC1155-SMIenterprises
RFC1213-MIBDisplayString ifIndex PhysAddress
SNMPv2-SMICounter32 Counter64 Gauge32 Integer32 IpAddress NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCRowStatus TEXTUAL-CONVENTION
VDSL-LINE-MIBvdslChanCurrTxRate vdslLineAlarmConfProfileName vdslLineConfProfileName vdslPhysSide
VDSL2-LINE-MIB MISSING-- RFC4001 xdsl2PMChHist15MUnit xdsl2ChAlarmConfProfileName xdsl2ChConfProfProfileName xdsl2LAlarmConfTempTemplateName xdsl2LConfProfProfileName xdsl2LConfTempTemplateName xdsl2LineAlarmConfProfileName xdsl2LineBand xdsl2PMChHist15MInterval xdsl2PMChHist1DInterval xdsl2PMChHist1DUnit xdsl2PMLCurrUnit xdsl2PMLHist15MInterval xdsl2PMLHist15MUnit xdsl2PMLHist1DInterval xdsl2PMLHist1DUnit xdsl2SCStatusBand xdsl2SCStatusDirection
OIDNameAccessStatusDescription
1.3.6.1.4.1.890Nodezyxel
1.3.6.1.4.1.890.1Nodeproducts
1.3.6.1.4.1.890.1.5NodeaccessSwitch
1.3.6.1.4.1.890.1.5.13NodeiesSeries
1.3.6.1.4.1.890.1.5.13.5Identityies5000ZyXEL Private MIB
1.3.6.1.4.1.890.1.5.13.5.1Nodeacl
1.3.6.1.4.1.890.1.5.13.5.1.1Nodedhcp
1.3.6.1.4.1.890.1.5.13.5.1.1.1ScalardhcpRelayEnableread-writecurrentEnable/disable DHCP relay Option82 function. Note that this object is obsolete in R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.1.2TabledhcpRelay82Tablenot-accessiblecurrentA table that contains DHCP Relay configuration.
1.3.6.1.4.1.890.1.5.13.5.1.1.2.1RowdhcpRelay82Entrynot-accessiblecurrentThe entry of DHCP Relay table.
1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.1ColumndhcpRelay82PrimaryServerread-createcurrentThe IP address of the DHCP Relay primary server.
1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.2ColumndhcpRelay82SecondaryServerread-createcurrentThe IP address of the DHCP Relay secondary server. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.3ColumndhcpRelay82ActiveServerread-createcurrentThe current active DHCP Relay server. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.4ColumndhcpRelay82Enableread-createcurrentEnable/disable DHCP relay and Option82 function. This object is supported by R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.5ColumndhcpRelay82Inforead-createcurrentUser specific Option82 information. This object is supported by R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.6ColumndhcpRelay82RelayModeread-createcurrentDHCP relay mode. This object is supported by R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.7ColumndhcpRelay82RowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.8ColumndhcpRelay82Suboption2Enableread-createcurrentEnable/disable Option 82 sub-option 2. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.9ColumndhcpRelay82Suboption2Inforead-createcurrentUser specified information for Option 82 sub-option 2. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.10ColumndhcpRelay82Option82Moderead-createcurrent
1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.11ColumndhcpRelay82LineCharEnableread-createcurrentEnable/disable option 82 sub-option line characteristic information.
1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.12ColumndhcpRelay82LineCharModeread-createcurrentrate: only bitrate information. full: full line characteristic information.
1.3.6.1.4.1.890.1.5.13.5.1.1.3ScalardhcpRelayInforead-writecurrentUser specific Option82 information. Note that this object is obsolete in R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.1.4ScalarmaxNumOfDhcpRelay82Confread-onlycurrentThe maximum number of rows that can be created in dhcpRelay82Table.
1.3.6.1.4.1.890.1.5.13.5.1.1.5ScalardhcpRelay82Delimiterread-writecurrentTo configure the ASCII value of the delimiter character.
1.3.6.1.4.1.890.1.5.13.5.1.1.6ScalardhcpRelayOption82CheckEnableread-writecurrentEnable/disable system to check option82 in DHCP packets from DHCP server.
1.3.6.1.4.1.890.1.5.13.5.1.1.7Tabledhcprelay82PortTablenot-accessiblecurrentThis table includes dhcprelay82 port configuration.
1.3.6.1.4.1.890.1.5.13.5.1.1.7.1Rowdhcprelay82PortEntrynot-accessiblecurrentAn entry in dhcprelay82PortTable.
1.3.6.1.4.1.890.1.5.13.5.1.1.7.1.1Columnoption82policyread-writecurrentreplace: Replace the original relay information when a DHCP message that already contains one. keep: Keep the original relay information when a DHCP message th…
1.3.6.1.4.1.890.1.5.13.5.1.2Nodedot1x
1.3.6.1.4.1.890.1.5.13.5.1.2.1Scalardot1xEnableread-writecurrentEnable/disable the 802.1x function.
1.3.6.1.4.1.890.1.5.13.5.1.2.2TableradiusServerTablenot-accessiblecurrentA table that contains Radius Server information.
1.3.6.1.4.1.890.1.5.13.5.1.2.2.1RowradiusServerEntrynot-accessiblecurrentThe entry of Radius Server table.
1.3.6.1.4.1.890.1.5.13.5.1.2.2.1.1ColumnradiusServerIndexread-onlycurrentThe identity of the RADIUS server.
1.3.6.1.4.1.890.1.5.13.5.1.2.2.1.2ColumnradiusServerIpread-writecurrentThe IP address of the Radius Server.
1.3.6.1.4.1.890.1.5.13.5.1.2.2.1.3ColumnradiusServerPortread-writecurrentThe UDP port of the Radius Server.
1.3.6.1.4.1.890.1.5.13.5.1.2.2.1.4ColumnradiusServerSecretread-writecurrentThe shared secret of the Radius Server.
1.3.6.1.4.1.890.1.5.13.5.1.2.3Tabledot1xPortTablenot-accessiblecurrentThis table includes 802.1x port configuration.
1.3.6.1.4.1.890.1.5.13.5.1.2.3.1Rowdot1xPortEntrynot-accessiblecurrentAn entry in dot1xPortTable.
1.3.6.1.4.1.890.1.5.13.5.1.2.3.1.1Columndot1xPortEnableread-writecurrentEnable/disable 802.1x for the port.
1.3.6.1.4.1.890.1.5.13.5.1.2.3.1.2Columndot1xPortControlread-writecurrentThe object defines the 802.1x control type for the port.
1.3.6.1.4.1.890.1.5.13.5.1.2.3.1.3Columndot1xPortReAuthEnableread-writecurrentEnable/disable 802.1x re-authentication for the port.
1.3.6.1.4.1.890.1.5.13.5.1.2.3.1.4Columndot1xPortReAuthPeriodread-writecurrentThe object defines the 802.1x re-authentication period for the port.
1.3.6.1.4.1.890.1.5.13.5.1.2.4Nodedot1xBatchSet
1.3.6.1.4.1.890.1.5.13.5.1.2.4.1Scalardot1xTargetread-writecurrentThis managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: the octet specifies …
1.3.6.1.4.1.890.1.5.13.5.1.2.4.2Scalardot1xOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable dot1x BIT 2: disable dot1x BIT 3: set dot1x control to b…
1.3.6.1.4.1.890.1.5.13.5.1.2.4.3Scalardot1xReAuthPeriodForBatchSetread-writecurrentThe object defines the 802.1x re-authentication period for batch setting.
1.3.6.1.4.1.890.1.5.13.5.1.3Nodemacfilter
1.3.6.1.4.1.890.1.5.13.5.1.3.1TablemacFilterPortTablenot-accessiblecurrentThis table includes the status of mac filtering for each port.
1.3.6.1.4.1.890.1.5.13.5.1.3.1.1RowmacFilterPortEntrynot-accessiblecurrentAn entry in macFilterPortTable.
1.3.6.1.4.1.890.1.5.13.5.1.3.1.1.1ColumnmacFilterPortEnableread-writecurrentEnable/disable MAC filtering for the port.
1.3.6.1.4.1.890.1.5.13.5.1.3.1.1.2ColumnmacFilterPortMacCountread-writecurrentThe total number of MAC addresses allowed for the port.
1.3.6.1.4.1.890.1.5.13.5.1.3.1.1.3ColumnmacFilterPortFilterModeread-writecurrentThe mac filter mode (accept or deny) for the port. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.3.2ScalarmaxNumOfMacFiltersInSystemread-onlycurrentThe max number of mac filters supported in the system.
1.3.6.1.4.1.890.1.5.13.5.1.3.3ScalarmaxNumOfMacFiltersPerPortread-onlycurrentThe max number of mac filters supported per port.
1.3.6.1.4.1.890.1.5.13.5.1.3.4ScalarcurrNumOfMacFiltersInSystemread-onlycurrentThe current number of mac filters in the system.
1.3.6.1.4.1.890.1.5.13.5.1.3.5TablemacFilterTablenot-accessiblecurrentA table that contains the mac filter addresses.
1.3.6.1.4.1.890.1.5.13.5.1.3.5.1RowmacFilterEntrynot-accessiblecurrentThe entry of macFilterTable.
1.3.6.1.4.1.890.1.5.13.5.1.3.5.1.1ColumnmacFilterAddrread-onlycurrentThe mac address which can pass through or be rejected from the port.
1.3.6.1.4.1.890.1.5.13.5.1.3.5.1.2ColumnmacFilterRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.13.5.1.3.6NodemacfilterBatchSet
1.3.6.1.4.1.890.1.5.13.5.1.3.6.1ScalarmacfilterTargetread-writecurrentThis managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: the octet specifies …
1.3.6.1.4.1.890.1.5.13.5.1.3.6.2ScalarmacfilterOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: enable mac filter BIT 2: enable mac count filter BIT 3: disable…
1.3.6.1.4.1.890.1.5.13.5.1.3.6.3ScalarmacFilterMacCountForBatchSetread-writecurrentThe total number of MAC addresses allowed for a port.
1.3.6.1.4.1.890.1.5.13.5.1.3.7TableouiFilterTablenot-accessiblecurrentA table that contains the OUI filter addresses.
1.3.6.1.4.1.890.1.5.13.5.1.3.7.1RowouiFilterEntrynot-accessiblecurrentThe entry of ouiFilterTable.
1.3.6.1.4.1.890.1.5.13.5.1.3.7.1.1ColumnouiFilterAddrread-onlycurrentThe first three bytes of the mac address which can pass through or be rejected from the port.
1.3.6.1.4.1.890.1.5.13.5.1.3.7.1.2ColumnouiFilterRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.13.5.1.3.8ScalarmaxNumOfOuiFiltersPerPortread-onlycurrentThe max number of OUI filters supported per port.
1.3.6.1.4.1.890.1.5.13.5.1.3.9TablemacFilterStatusTablenot-accessiblecurrentA table that contains the mac filter addresses.
1.3.6.1.4.1.890.1.5.13.5.1.3.9.1RowmacFilterStatusEntrynot-accessiblecurrentThe entry of macFilterStatusTable.
1.3.6.1.4.1.890.1.5.13.5.1.3.9.1.1ColumnmacFilterStatusIdread-onlycurrentThe index of the entry.
1.3.6.1.4.1.890.1.5.13.5.1.3.9.1.2ColumnmacFilterStatusAddrread-onlycurrentThe mac address which can pass through or be rejected from the port.
1.3.6.1.4.1.890.1.5.13.5.1.3.10TablemacFilterPerPVCTablenot-accessiblecurrentA table for per-PVC macfilter configuration.
1.3.6.1.4.1.890.1.5.13.5.1.3.10.1RowmacFilterPerPVCEntrynot-accessiblecurrentThe entry of macFilterPerPVCTable.
1.3.6.1.4.1.890.1.5.13.5.1.3.10.1.1ColumnmacFilterPerPVCVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.1.3.10.1.2ColumnmacFilterPerPVCVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.1.3.10.1.3ColumnmacFilterPerPVCEnableread-writecurrentEnable/disable MAC filtering for the port-vpi/vci
1.3.6.1.4.1.890.1.5.13.5.1.3.10.1.4ColumnmacFilterPerPVCModeread-writecurrentThe mac filter mode (accept or deny) for the port-vpi/vci.
1.3.6.1.4.1.890.1.5.13.5.1.3.10.1.5ColumnmacFilterPerPVCMacCountread-writecurrentThe total number of MAC addresses allowed for the port-vpi/vci.
1.3.6.1.4.1.890.1.5.13.5.1.3.11TablemacFilterPerPVCMACTablenot-accessiblecurrentA table for per-PVC macfilter configuration.
1.3.6.1.4.1.890.1.5.13.5.1.3.11.1RowmacFilterPerPVCMACEntrynot-accessiblecurrentThe entry of macFilterPerPVCMACTable.
1.3.6.1.4.1.890.1.5.13.5.1.3.11.1.1ColumnmacFilterPerPVCMACVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.1.3.11.1.2ColumnmacFilterPerPVCMACVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.1.3.11.1.3ColumnmacFilterPerPVCMACAddrread-onlycurrentThe mac address which can pass through or be rejected from the port-vpi/vci
1.3.6.1.4.1.890.1.5.13.5.1.3.11.1.4ColumnmacFilterPerPVCMACRowStatusread-writecurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.13.5.1.4Nodepktfilter
1.3.6.1.4.1.890.1.5.13.5.1.4.1TablepktFilterPortTablenot-accessiblecurrentThis table includes packet filtering for each port.
1.3.6.1.4.1.890.1.5.13.5.1.4.1.1RowpktFilterPortEntrynot-accessiblecurrentAn entry in pktFilterPortTable.
1.3.6.1.4.1.890.1.5.13.5.1.4.1.1.1ColumnpktFilterread-writecurrentThe packet filter. The semantic for each bit is: BIT 1: accept all BIT 2: accept PPPoE only BIT 3: reject ARP BIT 4: reject DHCP BIT 5: reject EAPOL BIT 6: rej…
1.3.6.1.4.1.890.1.5.13.5.1.4.2NodepktfilterBatchSet
1.3.6.1.4.1.890.1.5.13.5.1.4.2.1ScalarpktfilterTargetread-writecurrentThis managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: the octet specifies …
1.3.6.1.4.1.890.1.5.13.5.1.4.2.2ScalarpktfilterOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: set packet filter.
1.3.6.1.4.1.890.1.5.13.5.1.4.2.3ScalarpktfilterForBatchSetread-writecurrentThe packet filter for batch setting. The semantic for each bit is identical to the object pktFilter.
1.3.6.1.4.1.890.1.5.13.5.1.4.3TablepktFilterPerPVCTablenot-accessiblecurrentThis table includes per-PVC packet filter configuration.
1.3.6.1.4.1.890.1.5.13.5.1.4.3.1RowpktFilterPerPVCEntrynot-accessiblecurrentAn entry in pktFilterPerPVCTable.
1.3.6.1.4.1.890.1.5.13.5.1.4.3.1.1ColumnpktFilterPerPVCVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.1.4.3.1.2ColumnpktFilterPerPVCVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.1.4.3.1.3ColumnpktFilterPerPVCpktFilterread-writecurrentThe packet filter. The semantic for each bit is: BIT 1: accept all BIT 2: accept PPPoE only BIT 3: reject ARP BIT 4: reject DHCP BIT 5: reject EAPOL BIT 6: rej…
1.3.6.1.4.1.890.1.5.13.5.1.5NodedhcpSnoop
1.3.6.1.4.1.890.1.5.13.5.1.5.1TabledhcpSnoopPortTablenot-accessiblecurrentThis table includes DHCP snooping enable/disable for each port. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.5.1.1RowdhcpSnoopPortEntrynot-accessiblecurrentAn entry of dhcpSnoopPortTable.
1.3.6.1.4.1.890.1.5.13.5.1.5.1.1.1ColumndhcpSnoopEnableread-writecurrentEnable/disable DHCP snooping for a port.
1.3.6.1.4.1.890.1.5.13.5.1.5.2ScalardhcpSnoopTargetread-writecurrentThis managed object is used for identify the target on which the operation should be performed. The target is encoded as: Byte 1: the octet specifies a set of …
1.3.6.1.4.1.890.1.5.13.5.1.5.3ScalardhcpSnoopOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: DHCP snooping table flush.
1.3.6.1.4.1.890.1.5.13.5.1.5.4TabledhcpStaticTablenot-accessiblecurrentThis table defines DHCP static IP addresses. This table is supported by R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.5.4.1RowdhcpStaticEntrynot-accessiblecurrentAn entry of dhcpStaticTable.
1.3.6.1.4.1.890.1.5.13.5.1.5.4.1.1ColumndhcpStaticIpAddrread-onlycurrentThe IP address which can pass through the port.
1.3.6.1.4.1.890.1.5.13.5.1.5.4.1.2ColumndhcpStaticRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.13.5.1.5.5ScalarmaxNumOfDhcpStaticIpread-onlycurrentThe maximum number of DHCP static IP addresses which can be created for a port. This object is supported by R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.5.6TabledhcpSnoopLan2lanTablenot-accessiblecurrentSupport DHCP lan2lan to prevent DHCP service hack if customer installed DHCP server in its subscriber network. This table is supported by R5.05 and later versi…
1.3.6.1.4.1.890.1.5.13.5.1.5.6.1RowdhcpSnoopLan2lanEntrynot-accessiblecurrentThe entry of dhcpSnoopLan2lanTable.
1.3.6.1.4.1.890.1.5.13.5.1.5.6.1.1ColumndhcpSnoopLan2lanEnableread-writecurrentEnable/disable DHCP server on subscriber port
1.3.6.1.4.1.890.1.5.13.5.1.6NodeaclRule
1.3.6.1.4.1.890.1.5.13.5.1.6.1TableaclSetTablenot-accessiblecurrentThis table is supported by R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.6.1.1RowaclSetEntrynot-accessiblecurrentAn entry of aclSetTable.
1.3.6.1.4.1.890.1.5.13.5.1.6.1.1.1ColumnaclSetVpiread-onlycurrentVPI value.
1.3.6.1.4.1.890.1.5.13.5.1.6.1.1.2ColumnaclSetVciread-onlycurrentVCI value.
1.3.6.1.4.1.890.1.5.13.5.1.6.1.1.3ColumnaclSetProfileNameread-onlycurrentACL Profile name.
1.3.6.1.4.1.890.1.5.13.5.1.6.1.1.4ColumnaclSetRowStatusread-createcurrentRowStatus of aclSetEntry.
1.3.6.1.4.1.890.1.5.13.5.1.6.2TableaclNoMatchTablenot-accessiblecurrentThis table is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.6.2.1RowaclNoMatchEntrynot-accessiblecurrentAn entry of aclNoMatchTable.
1.3.6.1.4.1.890.1.5.13.5.1.6.2.1.1ColumnaclNoMatchActionread-writecurrentPass or drop the packet.
1.3.6.1.4.1.890.1.5.13.5.1.7NodepppoeAgent
1.3.6.1.4.1.890.1.5.13.5.1.7.1TablepppoeAgentTablenot-accessiblecurrentA table that contains PPPoE DHCP Relay configuration. This table is supported by R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.7.1.1RowpppoeAgentEntrynot-accessiblecurrentAn entry of pppoeAgentTable.
1.3.6.1.4.1.890.1.5.13.5.1.7.1.1.1ColumnpppoeAgentEnableread-createcurrentEnable/disable DHCP relay and Option82 function.
1.3.6.1.4.1.890.1.5.13.5.1.7.1.1.2ColumnpppoeAgentInforead-createcurrentUser specific Option82 information.
1.3.6.1.4.1.890.1.5.13.5.1.7.1.1.3ColumnpppoeAgentRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.13.5.1.7.1.1.4ColumnpppoeAgentOptionModeread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.1.7.1.1.5ColumnpppoeAgentLineCharEnableread-createcurrentEnable/disable option 82 sub-option line characteristic information.
1.3.6.1.4.1.890.1.5.13.5.1.7.1.1.6ColumnpppoeAgentLineCharModeread-createcurrentrate: only bitrate information. full: full line characteristic information.
1.3.6.1.4.1.890.1.5.13.5.1.7.2ScalarmaxNumOfPppoeDhcpRelay82Confread-onlycurrentThe maximum number of rows that can be created in pppoeAgentTable.
1.3.6.1.4.1.890.1.5.13.5.1.7.3ScalarpppoeAgentDelimiterread-writecurrentTo configure the ASCII value of the delimiter character.
1.3.6.1.4.1.890.1.5.13.5.1.8NodedsBcast
1.3.6.1.4.1.890.1.5.13.5.1.8.1TabledsBcastTablenot-accessiblecurrentA table that contains downstream broadcast forbidden configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.1.8.1.1RowdsBcastEntrynot-accessiblecurrentAn entry of dsBcastTable.
1.3.6.1.4.1.890.1.5.13.5.1.8.1.1.1ColumndsBcastRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.13.5.1.9NodeusBcast
1.3.6.1.4.1.890.1.5.13.5.1.9.1ScalarusBcastCtrlEnableread-writecurrentEnable/disable upstream broadcast control.
1.3.6.1.4.1.890.1.5.13.5.1.9.2ScalarusBcastCtrlRateread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.1.10NodedscpMapping
1.3.6.1.4.1.890.1.5.13.5.1.10.1TabledscpMappingTablenot-accessiblecurrentThe table contains DSCP mapping configuration.
1.3.6.1.4.1.890.1.5.13.5.1.10.1.1RowdscpMappingEntrynot-accessiblecurrentAn entry of dscpMappingTable.
1.3.6.1.4.1.890.1.5.13.5.1.10.1.1.1ColumndscpMappingSrcCodePointread-onlycurrentThe DSCP source code point used for mapping.
1.3.6.1.4.1.890.1.5.13.5.1.10.1.1.2ColumndscpMappingMapPriorityread-writecurrentThe mapping p bits that will replace the source p bits in the incoming packet.
1.3.6.1.4.1.890.1.5.13.5.1.10.2TabledscpPortTablenot-accessiblecurrentThe table contains DSCP port configuration.
1.3.6.1.4.1.890.1.5.13.5.1.10.2.1RowdscpPortEntrynot-accessiblecurrentAn entry of dscpPortTable.
1.3.6.1.4.1.890.1.5.13.5.1.10.2.1.1ColumndscpPortEnableread-writecurrentEnable/disable DSCP.
1.3.6.1.4.1.890.1.5.13.5.1.13ScalarmacAntiSpoofEnableread-writecurrentEnable/disable MAC anti-spoof.
1.3.6.1.4.1.890.1.5.13.5.1.14Nodesubnetvlan
1.3.6.1.4.1.890.1.5.13.5.1.14.1ScalarsubnetvlanStatusread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.1.14.2TablesubnetvlanTablenot-accessiblecurrentA table that contains subnet vlan configuration.
1.3.6.1.4.1.890.1.5.13.5.1.14.2.1RowsubnetvlanEntrynot-accessiblecurrentThe entry of subnet vlan table.
1.3.6.1.4.1.890.1.5.13.5.1.14.2.1.1ColumnsubnetvlanIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.1.14.2.1.2ColumnsubnetvlanMaskread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.1.14.2.1.3ColumnsubnetvlanVidread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.1.14.2.1.4ColumnsubnetvlanPriorityread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.1.14.2.1.5ColumnsubnetvlanNameread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.1.14.2.1.6ColumnsubnetvlanRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.13.5.1.14.3TablesubnetvlanInetTablenot-accessiblecurrentA table that contains IPv4/IPv6 subnet vlan configuration.
1.3.6.1.4.1.890.1.5.13.5.1.14.3.1RowsubnetvlanInetEntrynot-accessiblecurrentThe entry of subnet vlan inet table.
1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.1ColumnsubnetvlanInetAddrTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.2ColumnsubnetvlanInetAddrread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.3ColumnsubnetvlanInetMaskread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.4ColumnsubnetvlanInetVidread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.5ColumnsubnetvlanInetPriorityread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.6ColumnsubnetvlanInetNameread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.7ColumnsubnetvlanInetRowStatusread-createcurrentRow status of the table entry.
1.3.6.1.4.1.890.1.5.13.5.1.15Nodeloopguard
1.3.6.1.4.1.890.1.5.13.5.1.15.1TableloopguardTablenot-accessiblecurrentA table that contains Loopguard configuration.
1.3.6.1.4.1.890.1.5.13.5.1.15.1.1RowloopguardEntrynot-accessiblecurrentThe entry of Loopguard table.
1.3.6.1.4.1.890.1.5.13.5.1.15.1.1.1ColumnloopguardStatusread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.1.15.1.1.2ColumnloopguardModeread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.1.15.1.1.3ColumnloopguardRecoverTimeread-writecurrentseconds
1.3.6.1.4.1.890.1.5.13.5.1.16NodeusStorm
1.3.6.1.4.1.890.1.5.13.5.1.16.1TableusStormTablenot-accessiblecurrentA table that contains UsStorm configuration.
1.3.6.1.4.1.890.1.5.13.5.1.16.1.1RowusStormEntrynot-accessiblecurrentThe entry of UsStorm table.
1.3.6.1.4.1.890.1.5.13.5.1.16.1.1.1ColumnusStormBcastThreshread-writecurrent0~1488096 pkt/s, -1 means no limit
1.3.6.1.4.1.890.1.5.13.5.1.16.1.1.2ColumnusStormMcastThreshread-writecurrent0~1488096 pkt/s, -1 means no limit
1.3.6.1.4.1.890.1.5.13.5.1.16.1.1.3ColumnusStormUcastThreshread-writecurrent0~1488096 pkt/s, -1 means no limit
1.3.6.1.4.1.890.1.5.13.5.1.17NodearpInspection
1.3.6.1.4.1.890.1.5.13.5.1.17.1TablearpInspectionTablenot-accessiblecurrentSupport ARP inspection to filter unauthorized ARP packets on the network. This can prevent many kinds of man-in-the-middle attacks. This table is supported by …
1.3.6.1.4.1.890.1.5.13.5.1.17.1.1RowarpInspectionEntrynot-accessiblecurrentThe entry of arpInspectionTable.
1.3.6.1.4.1.890.1.5.13.5.1.17.1.1.1ColumnarpInspectionEnableread-writecurrentEnable/disable arp inspection on the specified subscriber port.
1.3.6.1.4.1.890.1.5.13.5.1.18NodemacFF
1.3.6.1.4.1.890.1.5.13.5.1.18.1TablemacFFStaticTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.1.18.1.1RowmacFFStaticEntrynot-accessiblecurrentThe entry of macFFStaticTable.
1.3.6.1.4.1.890.1.5.13.5.1.18.1.1.1ColumnmacFFStaticIndexread-onlycurrentThe macFF static entry index 1 ~ 24
1.3.6.1.4.1.890.1.5.13.5.1.18.1.1.2ColumnmacFFStaticSrcIPread-writecurrentMatched range for static subscriber's IP in ARP request
1.3.6.1.4.1.890.1.5.13.5.1.18.1.1.3ColumnmacFFStaticMaskread-writecurrentMatched range for static subscriber's IP in ARP request
1.3.6.1.4.1.890.1.5.13.5.1.18.1.1.4ColumnmacFFStaticArasIPread-writecurrentIP of static macFF Access Router/App Server
1.3.6.1.4.1.890.1.5.13.5.1.18.1.1.5ColumnmacFFStaticVidread-writecurrentvlan ID of macFF Access Router/App Server
1.3.6.1.4.1.890.1.5.13.5.1.18.1.1.6ColumnmacFFStaticRowStatusread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.1.18.2TablemacFFDynamicTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.1.18.2.1RowmacFFDynamicEntrynot-accessiblecurrentThe entry of macFFDynamicTable.
1.3.6.1.4.1.890.1.5.13.5.1.18.2.1.1ColumnmacFFDynamicIndexread-onlycurrentThe macFF entry index 1 ~ 24
1.3.6.1.4.1.890.1.5.13.5.1.18.2.1.2ColumnmacFFDynamicSrcIPread-onlycurrentMatched range for dynamic subscriber's IP in ARP request
1.3.6.1.4.1.890.1.5.13.5.1.18.2.1.3ColumnmacFFDynamicMaskread-onlycurrentMatched range for dynamic subscriber's IP in ARP request
1.3.6.1.4.1.890.1.5.13.5.1.18.2.1.4ColumnmacFFDynamicArasIPread-onlycurrentIP of dynamic macFF Access Router/App Server
1.3.6.1.4.1.890.1.5.13.5.1.18.2.1.5ColumnmacFFDynamicVidread-onlycurrentvlan ID of macFF Access Router/App Server
1.3.6.1.4.1.890.1.5.13.5.1.18.3TablemacFFVlanTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.1.18.3.1RowmacFFVlanEntrynot-accessiblecurrentThe entry of macFFVlanTable.
1.3.6.1.4.1.890.1.5.13.5.1.18.3.1.1ColumnmacFFVlanVidread-onlycurrentVlan ID of macFF Access Router/App Server
1.3.6.1.4.1.890.1.5.13.5.1.18.3.1.2ColumnmacFFVlanRowStatusread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.1.18.4ScalarmacFFFlushread-writecurrentSet the object to n to flush the slot n's macff arp table(not include the MSC slot). macFFArpStatusUplinkTable(1.3.6.1.4.1.890.1.5.13.5.13.23.1) macFFArpStatus…
1.3.6.1.4.1.890.1.5.13.5.1.19Nodedhcpv6
1.3.6.1.4.1.890.1.5.13.5.1.19.1Tabledhcpv6RelayTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.1.19.1.1Rowdhcpv6RelayEntrynot-accessiblecurrentThe entry of dhcpv6RelayTable.
1.3.6.1.4.1.890.1.5.13.5.1.19.1.1.1Columndhcpv6RelayLdraStateread-createcurrentEnable/disable DHCPv6 LDRA function
1.3.6.1.4.1.890.1.5.13.5.1.19.1.1.2Columndhcpv6RelayRowStatusread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.1.19.2Tabledhcpv6RelayOptionTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.1.19.2.1Rowdhcpv6RelayOptionEntrynot-accessiblecurrentThe entry of dhcpv6RelayOptionTable.
1.3.6.1.4.1.890.1.5.13.5.1.19.2.1.1Columndhcpv6RelayOptionIdread-onlycurrentDHCPv6 option ID
1.3.6.1.4.1.890.1.5.13.5.1.19.2.1.2Columndhcpv6RelayOptionStateread-writecurrentEnable/disable DHCPv6 option
1.3.6.1.4.1.890.1.5.13.5.1.19.2.1.3Columndhcpv6RelayOptionFormatread-writecurrentUser specific Option format '%' treated as a beginner of predefined runtime variable the rule is below: %%: equals character % %0x00~0xFF: represents byte valu…
1.3.6.1.4.1.890.1.5.13.5.1.19.3Tabledhcpv6RelayPortTablenot-accessiblecurrentThis table includes dhcpv6relay port configuration.
1.3.6.1.4.1.890.1.5.13.5.1.19.3.1Rowdhcpv6RelayPortEntrynot-accessiblecurrentAn entry in dhcpv6RelayPortTable.
1.3.6.1.4.1.890.1.5.13.5.1.19.3.1.1Columndhcpv6RelayOptLdraPortPolicyread-writecurrentdrop: drop the packet when a DHCPv6 message that already contains relay-forward header. replace: replace the original relay information when a DHCPv6 message t…
1.3.6.1.4.1.890.1.5.13.5.1.20Nodebpductrl
1.3.6.1.4.1.890.1.5.13.5.1.20.1TablebpduenableTablenot-accessiblecurrentThis table includes bpdu ctrl enable/disable for each port.
1.3.6.1.4.1.890.1.5.13.5.1.20.1.1RowbpduEntrynot-accessiblecurrentAn entry in bpduenableTable.
1.3.6.1.4.1.890.1.5.13.5.1.20.1.1.1Columnbpductrlenableread-writecurrentEnable/Disable BpduCtrl.
1.3.6.1.4.1.890.1.5.13.5.2Nodealarmconf
1.3.6.1.4.1.890.1.5.13.5.2.1ScalaralarmOpsread-writecurrentThe manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. …
1.3.6.1.4.1.890.1.5.13.5.2.2TablealarmConfTablenot-accessiblecurrentThis table includes alarm configuration.
1.3.6.1.4.1.890.1.5.13.5.2.2.1RowalarmConfEntrynot-accessiblecurrentAn entry in alarmConfTable.
1.3.6.1.4.1.890.1.5.13.5.2.2.1.1ColumnalarmConfIdread-onlycurrent3: dslLineUp 4: dslLineDown 7: dslLineLdmStart 8: dslLineLdmDone 9: dslLinePowerDownL2 10:dslLinePowerDownL0 11:dslLineFailure 14:adslPerfLolThresh 17:adslPerf…
1.3.6.1.4.1.890.1.5.13.5.2.2.1.2ColumnalarmConfFacilityread-writecurrentAlarm facility.
1.3.6.1.4.1.890.1.5.13.5.2.2.1.3ColumnalarmConfTargetread-writecurrentThe destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog
1.3.6.1.4.1.890.1.5.13.5.2.2.1.4ColumnalarmConfSeverityread-writecurrentAlarm severity
1.3.6.1.4.1.890.1.5.13.5.2.2.1.5ColumnalarmConfClearableread-writecurrentSetting the object to one indicates that the alarm is to be cleared when user submits alarm clear.
1.3.6.1.4.1.890.1.5.13.5.2.3TablealarmCurrTablenot-accessiblecurrentThis table includes current alarm information.
1.3.6.1.4.1.890.1.5.13.5.2.3.1RowalarmCurrEntrynot-accessiblecurrentAn entry in alarmCurrTable.
1.3.6.1.4.1.890.1.5.13.5.2.3.1.1ColumnalarmCurrIndexread-onlycurrentIndex of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.3.1.2ColumnalarmCurrOccurTimeread-onlycurrentAlarm occurence time (in hundredths of a second) since the system was last re-initialized.
1.3.6.1.4.1.890.1.5.13.5.2.3.1.3ColumnalarmCurrTrapOidread-onlycurrentTrap OID of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.3.1.4ColumnalarmCurrParam1read-onlycurrentThe 1st parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.3.1.5ColumnalarmCurrParam2read-onlycurrentThe 2nd parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.3.1.6ColumnalarmCurrParam3read-onlycurrentThe 3rd parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.3.1.7ColumnalarmCurrParam4read-onlycurrentThe 4th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.3.1.8ColumnalarmCurrParam5read-onlycurrentThe 5th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.3.1.9ColumnalarmCurrParam6read-onlycurrentThe 6th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.3.1.10ColumnalarmCurrParam7read-onlycurrentThe 7th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.3.1.11ColumnalarmCurrParam8read-onlycurrentThe 8th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.3.1.12ColumnalarmCurrTimeDescrread-onlycurrentThe string representation of occurence time (YYYY/MM/DD HH:MM:SS).
1.3.6.1.4.1.890.1.5.13.5.2.3.1.13ColumnalarmCurrSeverityread-onlycurrentThe severity of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.3.1.14ColumnalarmCurrDescrread-onlycurrentThe description of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.4TablealarmSeverityPortTablenot-accessiblecurrentThis table includes the configuration of alarm reporting severity threshold for each port.
1.3.6.1.4.1.890.1.5.13.5.2.4.1RowalarmSeverityPortEntrynot-accessiblecurrentAn entry in alarmSeverityPortTable.
1.3.6.1.4.1.890.1.5.13.5.2.4.1.1ColumnseverityThreshread-writecurrentThe minimum alarm severity that is reported.
1.3.6.1.4.1.890.1.5.13.5.2.5TableexternalAlarmTablenot-accessiblecurrentThis table includes the configuration of external alarms.
1.3.6.1.4.1.890.1.5.13.5.2.5.1RowexternalAlarmEntrynot-accessiblecurrentAn entry in externalAlarmTable.
1.3.6.1.4.1.890.1.5.13.5.2.5.1.1ColumnexternalAlarmIndexread-onlycurrentThe external alarm index.
1.3.6.1.4.1.890.1.5.13.5.2.5.1.2ColumnexternalAlarmNameread-writecurrentThe external alarm name.
1.3.6.1.4.1.890.1.5.13.5.2.6ScalaralarmTargetread-writecurrentThe manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. …
1.3.6.1.4.1.890.1.5.13.5.2.7TablealarmHisTablenot-accessiblecurrentThis table that contains alarm history data. This table is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.2.7.1RowalarmHisEntrynot-accessiblecurrentAn entry in alarmHisTable.
1.3.6.1.4.1.890.1.5.13.5.2.7.1.1ColumnalarmHisIndexread-onlycurrentIndex of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.7.1.2ColumnalarmHisOccurTimeread-onlycurrentAlarm occurence time (in hundredths of a second) since the system was last re-initialized.
1.3.6.1.4.1.890.1.5.13.5.2.7.1.3ColumnalarmHisTrapOidread-onlycurrentTrap OID of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.7.1.4ColumnalarmHisParam1read-onlycurrentThe 1st parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.7.1.5ColumnalarmHisParam2read-onlycurrentThe 2nd parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.7.1.6ColumnalarmHisParam3read-onlycurrentThe 3rd parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.7.1.7ColumnalarmHisParam4read-onlycurrentThe 4th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.7.1.8ColumnalarmHisParam5read-onlycurrentThe 5th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.7.1.9ColumnalarmHisParam6read-onlycurrentThe 6th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.7.1.10ColumnalarmHisParam7read-onlycurrentThe 7th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.7.1.11ColumnalarmHisParam8read-onlycurrentThe 8th parameter of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.7.1.12ColumnalarmHisTimeDescrread-onlycurrentThe string representation of occurence time (YYYY/MM/DD HH:MM:SS).
1.3.6.1.4.1.890.1.5.13.5.2.7.1.13ColumnalarmHisSeverityread-onlycurrentThe severity of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.7.1.14ColumnalarmHisDescrread-onlycurrentThe description of the alarm.
1.3.6.1.4.1.890.1.5.13.5.2.8NodealarmHisFilter
1.3.6.1.4.1.890.1.5.13.5.2.8.1ScalaralarmHisFilterByIfIndexread-writecurrentifIndex Filter for alarmHisTable.
1.3.6.1.4.1.890.1.5.13.5.3Nodeconfig
1.3.6.1.4.1.890.1.5.13.5.3.1ScalarconfigOpsread-writecurrentThe manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. …
1.3.6.1.4.1.890.1.5.13.5.4Nodediagnostic
1.3.6.1.4.1.890.1.5.13.5.4.1Nodeloopback
1.3.6.1.4.1.890.1.5.13.5.4.1.1ScalarloopbackTargetread-writecurrentIfIndex of the port which would be performed loopback test.
1.3.6.1.4.1.890.1.5.13.5.4.1.2ScalarloopbackOpsread-writecurrentThe manager sets the corresponding bit value to 1 to start the loopback test and the agent clears the object to zero when loopback test is successfully complet…
1.3.6.1.4.1.890.1.5.13.5.4.1.3ScalarloopbackVpiread-writecurrentVPI of the virtual channel which would be performed loopback test.
1.3.6.1.4.1.890.1.5.13.5.4.1.4ScalarloopbackVciread-writecurrentVCI of the virtual channel which would be performed loopback test.
1.3.6.1.4.1.890.1.5.13.5.4.1.5ScalarloopbackStatusread-onlycurrentLoopback test status message.
1.3.6.1.4.1.890.1.5.13.5.4.2Nodeldm
1.3.6.1.4.1.890.1.5.13.5.4.2.1ScalarldmTargetread-writecurrentIfIndex of the port which would be performed ldm test.
1.3.6.1.4.1.890.1.5.13.5.4.2.2ScalarldmOpsread-writecurrentThe manager sets the object to 1 to start the ldm test and the agent clears the object to zero when ldm test is successfully completed.
1.3.6.1.4.1.890.1.5.13.5.4.2.3ScalarldmStatusread-onlycurrentStatus description of ldm test result.
1.3.6.1.4.1.890.1.5.13.5.4.2.4ScalarldmAtucLoopAttenuationread-onlycurrentLoop Attenuation.
1.3.6.1.4.1.890.1.5.13.5.4.2.5ScalarldmAtucSignalAttenuationread-onlycurrentSignal Attenuation.
1.3.6.1.4.1.890.1.5.13.5.4.2.6ScalarldmAtucSignalMarginread-onlycurrentSignal Margin.
1.3.6.1.4.1.890.1.5.13.5.4.2.7ScalarldmAtucAggregateTxPowerread-onlycurrentActual Aggregate Transmit Power.
1.3.6.1.4.1.890.1.5.13.5.4.2.8ScalarldmAtucAttainableBitRateread-onlycurrentAttainable Bit Rate.
1.3.6.1.4.1.890.1.5.13.5.4.2.9ScalarldmAturLoopAttenuationread-onlycurrentLoop Attenuation.
1.3.6.1.4.1.890.1.5.13.5.4.2.10ScalarldmAturSignalAttenuationread-onlycurrentSignal Attenuation.
1.3.6.1.4.1.890.1.5.13.5.4.2.11ScalarldmAturSignalMarginread-onlycurrentSignal Margin.
1.3.6.1.4.1.890.1.5.13.5.4.2.12ScalarldmAturAggregateTxPowerread-onlycurrentActual Aggregate Transmit Power.
1.3.6.1.4.1.890.1.5.13.5.4.2.13ScalarldmAturAttainableBitRateread-onlycurrentAttainable Bit Rate.
1.3.6.1.4.1.890.1.5.13.5.4.2.14ScalarldmAtucNumOfSubcarriersPerPortread-onlycurrentThe number of subcarriers per port for ATU-C.
1.3.6.1.4.1.890.1.5.13.5.4.2.15ScalarldmAturNumOfSubcarriersPerPortread-onlycurrentThe number of subcarriers per port for ATU-R.
1.3.6.1.4.1.890.1.5.13.5.4.2.16ScalarldmAtucHlinScaleread-onlycurrentScale of Hlin.
1.3.6.1.4.1.890.1.5.13.5.4.2.17ScalarldmAtucHlinReal1read-onlycurrentThe object provides real part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.4.2.18ScalarldmAtucHlinReal2read-onlycurrentThe object provides real part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.4.2.19ScalarldmAtucHlinImage1read-onlycurrentThe object provides image part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.4.2.20ScalarldmAtucHlinImage2read-onlycurrentThe object provides image part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.4.2.21ScalarldmAtucHlog1read-onlycurrentThe object provides Hlog for the first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measureme…
1.3.6.1.4.1.890.1.5.13.5.4.2.22ScalarldmAtucHlog2read-onlycurrentThe object provides Hlog for the last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measuremen…
1.3.6.1.4.1.890.1.5.13.5.4.2.23ScalarldmAtucQln1read-onlycurrentThe object provides QLN for the first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measurement cou…
1.3.6.1.4.1.890.1.5.13.5.4.2.24ScalarldmAtucQln2read-onlycurrentThe object provides QLN for the last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measurement coul…
1.3.6.1.4.1.890.1.5.13.5.4.2.25ScalarldmAtucSnr1read-onlycurrentThe object provides SNR for the first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measuremen…
1.3.6.1.4.1.890.1.5.13.5.4.2.26ScalarldmAtucSnr2read-onlycurrentThe object provides SNR for the last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement…
1.3.6.1.4.1.890.1.5.13.5.4.2.27ScalarldmAturHlinScaleread-onlycurrentScale of Hlin.
1.3.6.1.4.1.890.1.5.13.5.4.2.28ScalarldmAturHlinRealread-onlycurrentReal part of Hlin. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.4.2.29ScalarldmAturHlinImageread-onlycurrentImage part of Hlin. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.4.2.30ScalarldmAturHlogread-onlycurrentHlog of subcarrier. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier…
1.3.6.1.4.1.890.1.5.13.5.4.2.31ScalarldmAturQlnread-onlycurrentQLN of subcarrier. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.2.32ScalarldmAturSnrread-onlycurrentSNR of subcarrier. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier …
1.3.6.1.4.1.890.1.5.13.5.4.3Nodeselt
1.3.6.1.4.1.890.1.5.13.5.4.3.1ScalarseltTargetread-writecurrentIfIndex of the port which would be performed single end loopback test.
1.3.6.1.4.1.890.1.5.13.5.4.3.2ScalarseltOpsread-writecurrentThe manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is successfully completed.
1.3.6.1.4.1.890.1.5.13.5.4.3.3ScalarseltStatusread-onlycurrentStatus description of the selt result.
1.3.6.1.4.1.890.1.5.13.5.4.3.4ScalarseltCableTyperead-onlycurrentThe cable type that selt result indicates.
1.3.6.1.4.1.890.1.5.13.5.4.3.5ScalarseltLoopEstimateLengthFtread-onlycurrentThe estimated loop length that selt result indicates.
1.3.6.1.4.1.890.1.5.13.5.4.3.6ScalarseltLoopEstimateLengthMeterread-onlycurrentThe estimated loop length that selt result indicates.
1.3.6.1.4.1.890.1.5.13.5.4.4Nodemlt
1.3.6.1.4.1.890.1.5.13.5.4.4.1ScalarmltTargetread-writecurrentIfIndex of the port which would be performed Metallic Link Test.
1.3.6.1.4.1.890.1.5.13.5.4.4.2ScalarmltOpsread-writecurrentThe manager sets the object to 1 to start the mlt and the agent clears the object to zero when mlt is successfully completed.
1.3.6.1.4.1.890.1.5.13.5.4.4.3ScalarmltOptionread-writecurrentall : test all items vac: test AC voltage vdc: test DC voltage rload: test load resistance riso: test isolation resistance cap: test capacitor ren: test REN va…
1.3.6.1.4.1.890.1.5.13.5.4.4.4ScalarmltForceread-writecurrentForce test even the port is in use.
1.3.6.1.4.1.890.1.5.13.5.4.4.5NodemltResult
1.3.6.1.4.1.890.1.5.13.5.4.4.5.1ScalarmltVacTipread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.2ScalarmltVacRingread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.3ScalarmltVacDiffread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.4ScalarmltVdcTipread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.5ScalarmltVdcRingread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.6ScalarmltVdcDiffread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.7ScalarmltRLoopread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.8ScalarmltRtgread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.9ScalarmltRrgread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.10ScalarmltRtrread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.11ScalarmltCtgread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.12ScalarmltCrgread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.13ScalarmltCtrread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.14ScalarmltRenread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.15ScalarmltVRingread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.16ScalarmltVMeteringread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.17ScalarmltDialToneDetectedread-onlycurrentValue List: 1 : Yes. 2 : No. 3 : Test failed 4 : No result.
1.3.6.1.4.1.890.1.5.13.5.4.4.5.18ScalarmltDetectedDtmfCountread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.19ScalarmltDialToneDelayread-onlycurrent[Special value]: 250000016 : No result. 250000032 : Test failed. 250000048 : 'Not Measured' reason # 1: Can't start the test when port is enabled and force not…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.20ScalarmltReceiverStateread-onlycurrent[Normal Value]: 1 : On hook. 2 : Off hook. 3 : circuit short or fault. 4 : circuit open. [Special value]: 250000016 : No result. 250000032 : Test failed. 25000…
1.3.6.1.4.1.890.1.5.13.5.4.4.5.21ScalarmltDetectedDtmfDigitread-onlycurrentThe DTMF digit string be detected in MLT test.
1.3.6.1.4.1.890.1.5.13.5.4.4.5.22ScalarmltErrorMsgread-onlycurrentThe error message when fail to start MLT test.
1.3.6.1.4.1.890.1.5.13.5.4.4.6TablemltRelayTablenot-accessiblecurrentPerform specified MLT relay function, or turn off MLT relay function in specified subscriber.
1.3.6.1.4.1.890.1.5.13.5.4.4.6.1RowmltRelayEntrynot-accessiblecurrentAn entry of mltRelayTable.
1.3.6.1.4.1.890.1.5.13.5.4.4.6.1.1ColumnmltRelaySetread-writecurrentBy default, relay function is turned off.
1.3.6.1.4.1.890.1.5.13.5.4.4.6.1.2ColumnmltRelayTimeoutread-writecurrentRelays will be turned off automatically while the specified timer is timeout. This object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.4.4.6.1.3ColumnmltRelayForceread-writecurrentSet to 1 to force to set relays even the port is in use. This object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.4.4.7ScalarmltTyperead-writecurrentoption(All) : all(0), test vac, vdc, riso, cap(1) option(Ring) : normal(0), start to ring(1), stop to ring(2) option(Digit) : normal(0), user input dtmf(1)
1.3.6.1.4.1.890.1.5.13.5.4.4.8ScalarmltCountread-writecurrentWhen test mltOption digit(11) and mltType set to user input dtmf(1), set the number of digit for testing.
1.3.6.1.4.1.890.1.5.13.5.4.4.9ScalarmltAbortread-writecurrentSet the slot id of a VoIP Card to terminate MLT test on it.
1.3.6.1.4.1.890.1.5.13.5.4.5Nodeoamloopback
1.3.6.1.4.1.890.1.5.13.5.4.5.1ScalaroamloopbackTargetread-writecurrentIfIndex of the port which would be performed oamloopback test.
1.3.6.1.4.1.890.1.5.13.5.4.5.2ScalaroamloopbackOpsread-writecurrentThe manager sets the corresponding bit value to 1 to start the oamloopback test and the agent clears the object to zero when oamloopback test is completed.
1.3.6.1.4.1.890.1.5.13.5.4.5.3ScalaroamloopbackPacketNumberread-writecurrentNumber of packets to be sent. 1~100000
1.3.6.1.4.1.890.1.5.13.5.4.5.4ScalaroamloopbackPacketSizeread-writecurrentSize of each packet. 64~1518
1.3.6.1.4.1.890.1.5.13.5.4.5.5NodeoamloopbackResult
1.3.6.1.4.1.890.1.5.13.5.4.5.5.1ScalaroamloopbackRecvCntread-onlycurrentNumber of packets received.
1.3.6.1.4.1.890.1.5.13.5.4.5.5.2ScalaroamloopbackElapseTimeread-onlycurrentoamloopback test elapsed time.
1.3.6.1.4.1.890.1.5.13.5.4.5.5.3ScalaroamloopbackErrorStatusread-onlycurrentoamloopback test status.
1.3.6.1.4.1.890.1.5.13.5.4.6Nodevdslldm
1.3.6.1.4.1.890.1.5.13.5.4.6.1ScalarvdslldmTargetread-writecurrentIfIndex of the port which would be performed vdsl ldm test.
1.3.6.1.4.1.890.1.5.13.5.4.6.2ScalarvdslldmOpsread-writecurrentThe manager sets the object to 1 to start the vdsl ldm test and the agent clears the object to zero when ldm test is successfully completed.
1.3.6.1.4.1.890.1.5.13.5.4.6.3ScalarvdslldmStatusread-onlycurrentStatus description of vdsl ldm test result.
1.3.6.1.4.1.890.1.5.13.5.4.6.4ScalarldmVtuNeLoopAttenuationUS0read-onlycurrentLoop Attenuation at US0 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.5ScalarldmVtuNeLoopAttenuationUS1read-onlycurrentLoop Attenuation at US1 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.6ScalarldmVtuNeLoopAttenuationUS2read-onlycurrentLoop Attenuation at US2 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.7ScalarldmVtuNeLoopAttenuationUS3read-onlycurrentLoop Attenuation at US3 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.8ScalarldmVtuNeSignalAttenuationUS0read-onlycurrentSignal Attenuation at US0 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.9ScalarldmVtuNeSignalAttenuationUS1read-onlycurrentSignal Attenuation at US1 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.10ScalarldmVtuNeSignalAttenuationUS2read-onlycurrentSignal Attenuation at US2 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.11ScalarldmVtuNeSignalAttenuationUS3read-onlycurrentSignal Attenuation at US3 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.12ScalarldmVtuNeSignalMarginUS0read-onlycurrentSignal Margin at US0 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.13ScalarldmVtuNeSignalMarginUS1read-onlycurrentSignal Margin at US1 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.14ScalarldmVtuNeSignalMarginUS2read-onlycurrentSignal Margin at US2 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.15ScalarldmVtuNeSignalMarginUS3read-onlycurrentSignal Margin at US3 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.16ScalarldmVtuNeAggregateTxPowerread-onlycurrentActual Aggregate Transmit Power. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.17ScalarldmVtuNeAttainableBitRateread-onlycurrentAttainable Bit Rate.
1.3.6.1.4.1.890.1.5.13.5.4.6.18ScalarldmVtuFeLoopAttenuationDS1read-onlycurrentLoop Attenuation at DS1 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.19ScalarldmVtuFeLoopAttenuationDS2read-onlycurrentLoop Attenuation at DS2 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.20ScalarldmVtuFeLoopAttenuationDS3read-onlycurrentLoop Attenuation at DS3 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.21ScalarldmVtuFeSignalAttenuationDS1read-onlycurrentSignal Attenuation at DS1 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.22ScalarldmVtuFeSignalAttenuationDS2read-onlycurrentSignal Attenuation at DS2 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.23ScalarldmVtuFeSignalAttenuationDS3read-onlycurrentSignal Attenuation at DS3 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.24ScalarldmVtuFeSignalMarginDS1read-onlycurrentSignal Margin at DS1 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.25ScalarldmVtuFeSignalMarginDS2read-onlycurrentSignal Margin at DS2 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.26ScalarldmVtuFeSignalMarginDS3read-onlycurrentSignal Margin at DS3 band. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.27ScalarldmVtuFeAggregateTxPowerread-onlycurrentActual Aggregate Transmit Power. A special value -32768 indicates that no measurement could be done for the sub-carrier group.
1.3.6.1.4.1.890.1.5.13.5.4.6.28ScalarldmVtuFeAttainableBitRateread-onlycurrentAttainable Bit Rate.
1.3.6.1.4.1.890.1.5.13.5.4.6.29ScalarldmVtuNeHlinScaleread-onlycurrentScale of Hlin.
1.3.6.1.4.1.890.1.5.13.5.4.6.30ScalarldmVtuNeHlinRealread-onlycurrentThe object provides real part of Hlin for the subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.4.6.31ScalarldmVtuNeHlinImageread-onlycurrentThe object provides image part of Hlin for the subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.4.6.32ScalarldmVtuNeHlogread-onlycurrentThe object provides Hlog for the subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could b…
1.3.6.1.4.1.890.1.5.13.5.4.6.33ScalarldmVtuNeQlnread-onlycurrentThe object provides QLN for the subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.4.6.34ScalarldmVtuNeSnrread-onlycurrentThe object provides SNR for the subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be…
1.3.6.1.4.1.890.1.5.13.5.4.6.35ScalarldmVtuFeHlinScaleread-onlycurrentScale of Hlin.
1.3.6.1.4.1.890.1.5.13.5.4.6.36ScalarldmVtuFeHlinRealread-onlycurrentReal part of Hlin. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.4.6.37ScalarldmVtuFeHlinImageread-onlycurrentImage part of Hlin. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.4.6.38ScalarldmVtuFeHlogread-onlycurrentHlog of subcarrier. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier…
1.3.6.1.4.1.890.1.5.13.5.4.6.39ScalarldmVtuFeQlnread-onlycurrentQLN of subcarrier. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.4.6.40ScalarldmVtuFeSnrread-onlycurrentSNR of subcarrier. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier …
1.3.6.1.4.1.890.1.5.13.5.4.6.41ScalarldmVtuNeHlinGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4 a…
1.3.6.1.4.1.890.1.5.13.5.4.6.42ScalarldmVtuFeHlinGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4 a…
1.3.6.1.4.1.890.1.5.13.5.4.6.43ScalarldmVtuNeHlogGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4 a…
1.3.6.1.4.1.890.1.5.13.5.4.6.44ScalarldmVtuFeHlogGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4 a…
1.3.6.1.4.1.890.1.5.13.5.4.6.45ScalarldmVtuNeQlnGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. This…
1.3.6.1.4.1.890.1.5.13.5.4.6.46ScalarldmVtuFeQlnGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. This…
1.3.6.1.4.1.890.1.5.13.5.4.6.47ScalarldmVtuNeSnrGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. This object is sup…
1.3.6.1.4.1.890.1.5.13.5.4.6.48ScalarldmVtuFeSnrGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. This object is sup…
1.3.6.1.4.1.890.1.5.13.5.4.7NodeimaOamF5Loopback
1.3.6.1.4.1.890.1.5.13.5.4.7.1ScalarimaOamF5LoopbackTargetGroupIndexread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.4.7.2ScalarimaOamF5LoopbackTargetVpiread-writecurrentVPI of the virtual channel which would be performed imaOamF5Loopback test.
1.3.6.1.4.1.890.1.5.13.5.4.7.3ScalarimaOamF5LoopbackTargetVciread-writecurrentVCI of the virtual channel which would be performed imaOamF5Loopback test.
1.3.6.1.4.1.890.1.5.13.5.4.7.4ScalarimaOamF5LoopbackTyperead-writecurrent
1.3.6.1.4.1.890.1.5.13.5.4.7.5ScalarimaOamF5LoopbackOpsread-writecurrentThe manager sets the corresponding bit value to 1 to start the imaOamF5Loopback test and the agent clears the object to zero when loopback test is successfully…
1.3.6.1.4.1.890.1.5.13.5.4.7.6ScalarimaOamF5LoopbackSegmentIdread-writecurrent16 bytes segment id.
1.3.6.1.4.1.890.1.5.13.5.4.7.7ScalarimaOamF5LoopbackStatusread-onlycurrentStatus description of IMA OAM F5 Loopback test result.
1.3.6.1.4.1.890.1.5.13.5.4.8Nodexdsl2ExtStatus
1.3.6.1.4.1.890.1.5.13.5.4.8.1Tablexdsl2ExtSCStatusTablenot-accessiblecurrentThe table xdsl2ExtSCStatusTable extends xdsl2SCStatusTable for ZyXEL product.
1.3.6.1.4.1.890.1.5.13.5.4.8.1.1Rowxdsl2ExtSCStatusEntrynot-accessiblecurrentThe table xdsl2ExtSCStatusTable contains extra subcarrier status parameters besides those in xdsl2LineSegmentTable.
1.3.6.1.4.1.890.1.5.13.5.4.8.1.1.1Columnxdsl2SCStatusActAtpread-onlycurrentActual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement…
1.3.6.1.4.1.890.1.5.13.5.4.8.2Tablexdsl2ExtSCStatusBandTablenot-accessiblecurrentThe table xdsl2ExtSCStatusBandTable extends xdsl2SCStatusBandTable for ZyXEL product.
1.3.6.1.4.1.890.1.5.13.5.4.8.2.1Rowxdsl2ExtSCStatusBandEntrynot-accessiblecurrentThe table xdsl2ExtSCStatusBandTable contains extra subcarrier status parameters that are grouped per-band besides those in xdsl2SCStatusBandTable.
1.3.6.1.4.1.890.1.5.13.5.4.8.2.1.1Columnxdsl2SCStatusBandSnrMarginread-onlycurrentSNR Margin is the maximum increase in dB of the noise power received at the xTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstr…
1.3.6.1.4.1.890.1.5.13.5.5Nodeipconf
1.3.6.1.4.1.890.1.5.13.5.5.1NodestaticRoute
1.3.6.1.4.1.890.1.5.13.5.5.1.1ScalarmaxNumOfStaticRoutesread-onlycurrentThe maximum number of static routes supported by the system.
1.3.6.1.4.1.890.1.5.13.5.5.1.2TablestaticRouteTablenot-accessiblecurrentA table that contains information about static routes.
1.3.6.1.4.1.890.1.5.13.5.5.1.2.1RowstaticRouteEntrynot-accessiblecurrentA list of static route entry.
1.3.6.1.4.1.890.1.5.13.5.5.1.2.1.1ColumnstaticRouteNameread-onlycurrentThe name of the static route.
1.3.6.1.4.1.890.1.5.13.5.5.1.2.1.2ColumnstaticRouteDestread-createcurrentThe destination IP address of the static route.
1.3.6.1.4.1.890.1.5.13.5.5.1.2.1.3ColumnstaticRouteMaskread-createcurrentThe subnet mask of the static route.
1.3.6.1.4.1.890.1.5.13.5.5.1.2.1.4ColumnstaticRouteGatewayread-createcurrentThe gateway IP address of the static route.
1.3.6.1.4.1.890.1.5.13.5.5.1.2.1.5ColumnstaticRouteMetricread-createcurrentThe routing metric of the static route.
1.3.6.1.4.1.890.1.5.13.5.5.1.2.1.6ColumnstaticRouteRowStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', , and is deac…
1.3.6.1.4.1.890.1.5.13.5.5.2NodestaticIp
1.3.6.1.4.1.890.1.5.13.5.5.2.1ScalarstaticIpInbandIpread-writecurrentInband IP Address. Not immediately apply. Use staticIpOps to apply the object setting on device.
1.3.6.1.4.1.890.1.5.13.5.5.2.2ScalarstaticIpInbandMaskread-writecurrentInband IP Mask. Not immediately apply. Use staticIpOps to apply the object setting on device.
1.3.6.1.4.1.890.1.5.13.5.5.2.3ScalarstaticIpInbandVlanread-writecurrentInband IP Vlan. Not immediately apply. Use staticIpOps to apply the object setting on device.
1.3.6.1.4.1.890.1.5.13.5.5.2.4ScalarstaticIpOutbandIpread-writecurrentOutband IP Address. Not immediately apply. Use staticIpOps to apply the object setting on device.
1.3.6.1.4.1.890.1.5.13.5.5.2.5ScalarstaticIpOutbandMaskread-writecurrentOutband IP Mask. Not immediately apply. Use staticIpOps to apply the object setting on device.
1.3.6.1.4.1.890.1.5.13.5.5.2.6ScalarstaticIpGatewayIPread-writecurrentGateway IP Address. Not immediately apply. Use staticIpOps to apply the object setting on device.
1.3.6.1.4.1.890.1.5.13.5.5.2.7ScalarstaticIpOpsread-writecurrentThe manager setting will temporary saved but not set into Device. Set value of staticIpOps to 1 to apply the setting of IpTable on device. Set value of staticI…
1.3.6.1.4.1.890.1.5.13.5.6Nodelcm
1.3.6.1.4.1.890.1.5.13.5.6.1ScalarnumOfChassisread-onlycurrentThe number of chassis in the system.
1.3.6.1.4.1.890.1.5.13.5.6.2TablechassisTablenot-accessiblecurrentThe table which contains the chassis information in the system.
1.3.6.1.4.1.890.1.5.13.5.6.2.1RowchassisEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.6.2.1.1ColumnchassisIdread-onlycurrentThe Chassis ID.
1.3.6.1.4.1.890.1.5.13.5.6.2.1.2ColumnchassisFrameNumberread-writecurrentThe Frame ID.
1.3.6.1.4.1.890.1.5.13.5.6.2.1.3ColumnchassisSerialNumberread-onlycurrentThe Chassis Serial Number.
1.3.6.1.4.1.890.1.5.13.5.6.2.1.4ColumnchassisNumberread-writecurrentThe Chassis Number which is defined by the system administrator for management purpose.
1.3.6.1.4.1.890.1.5.13.5.6.2.1.5ColumnchassisStatusread-onlycurrentThe current status of the chassis.
1.3.6.1.4.1.890.1.5.13.5.6.3TableslotTablenot-accessiblecurrentThe table which contains the slot information in a chassis.
1.3.6.1.4.1.890.1.5.13.5.6.3.1RowslotEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.6.3.1.1ColumnslotIdread-onlycurrentIdentity of the slot.
1.3.6.1.4.1.890.1.5.13.5.6.3.1.2ColumnslotModuleTyperead-onlycurrentCard type of the plug-in card.
1.3.6.1.4.1.890.1.5.13.5.6.3.1.3ColumnslotModuleDescrread-onlycurrentThe descriptions of the plug-in card.
1.3.6.1.4.1.890.1.5.13.5.6.3.1.4ColumnslotModuleFWVersionread-onlycurrentThe firmware version of the plug-in card.
1.3.6.1.4.1.890.1.5.13.5.6.3.1.5ColumnslotModuleDriverVersionread-onlycurrentThe DSL driver of the plug-in card.
1.3.6.1.4.1.890.1.5.13.5.6.3.1.6ColumnslotModuleModemCodeVersionread-onlycurrentThe DSL modem code version of the plug-in card.
1.3.6.1.4.1.890.1.5.13.5.6.3.1.7ColumnslotModuleStatusread-onlycurrentThe module state of the plug-in card.
1.3.6.1.4.1.890.1.5.13.5.6.3.1.8ColumnslotModuleAlarmStatusread-onlycurrentThis variable indicates the alarm status of the module. It is a bit map represented a sum, therefore, it can represent multiple defects simultaneously. The mod…
1.3.6.1.4.1.890.1.5.13.5.6.3.1.9ColumnslotModuleSerialNumberread-onlycurrentThe serial number of the plug-in card.
1.3.6.1.4.1.890.1.5.13.5.6.3.1.10ColumnslotModuleHWVersionread-onlycurrentThe hardware version of the plug-in card.
1.3.6.1.4.1.890.1.5.13.5.6.3.1.11ColumnslotModuleUpTimeread-onlycurrentThe time (in seconds) since the plug-in card was last re-initialized.
1.3.6.1.4.1.890.1.5.13.5.6.3.1.12ColumnslotModuleMacAddressread-onlycurrentThe MAC Address of the plug-in card.
1.3.6.1.4.1.890.1.5.13.5.6.3.1.13ColumnslotModuleMacAddress2read-onlycurrentThe MAC Address of the plug-in card.
1.3.6.1.4.1.890.1.5.13.5.6.4TablemscPortTablenot-accessiblecurrentThe table contains MSC port status.
1.3.6.1.4.1.890.1.5.13.5.6.4.1RowmscPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.6.4.1.1ColumnmscPortIdread-onlycurrentIdentity of the MSC port.
1.3.6.1.4.1.890.1.5.13.5.6.4.1.2ColumnmscPortTyperead-onlycurrentType of the MSC port.
1.3.6.1.4.1.890.1.5.13.5.7Nodemulticast
1.3.6.1.4.1.890.1.5.13.5.7.1ScalarigmpEnableread-writecurrentEnable/disable IGMP protocol.
1.3.6.1.4.1.890.1.5.13.5.7.2NodestaticMulticast
1.3.6.1.4.1.890.1.5.13.5.7.2.1ScalarmaxNumberOfMcastGroupsread-onlycurrentThe max number of static multicast groups supported by the system.
1.3.6.1.4.1.890.1.5.13.5.7.2.2TablemcastGroupTablenot-accessiblecurrentA table that contains static multicast group information.
1.3.6.1.4.1.890.1.5.13.5.7.2.2.1RowmcastGroupEntrynot-accessiblecurrentThe entry of multicast group table.
1.3.6.1.4.1.890.1.5.13.5.7.2.2.1.1ColumnmcastGroupIpread-onlycurrentThe multicast IP address of the group.
1.3.6.1.4.1.890.1.5.13.5.7.2.2.1.2ColumnmcastGroupFixedPortsread-createcurrentThe port list which specify the ports joining the multicast group.
1.3.6.1.4.1.890.1.5.13.5.7.2.2.1.3ColumnmcastGroupForbiddenPortsread-createcurrentThe port list which specify the ports prohibited by the multicast group.
1.3.6.1.4.1.890.1.5.13.5.7.2.2.1.4ColumnmcastGroupRowStatusread-createcurrentThe row status of the multicast group entry.
1.3.6.1.4.1.890.1.5.13.5.7.2.3ScalarmaxNumberOfMacMcastGroupsread-onlycurrentThe maximum number of row entries that user can create in macMcastGroupTable. This object is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.7.2.4TablemacMcastGroupTablenot-accessiblecurrentThis table specify the static multicast group with MAC address. This table is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.7.2.4.1RowmacMcastGroupEntrynot-accessiblecurrentAn entry of macMcastGroupTable.
1.3.6.1.4.1.890.1.5.13.5.7.2.4.1.1ColumnmacMcastGroupMacread-onlycurrentThe multicast MAC address of the group.
1.3.6.1.4.1.890.1.5.13.5.7.2.4.1.2ColumnmacMcastGroupFixedPortsread-createcurrentThe port list which specify the ports joining the multicast group.
1.3.6.1.4.1.890.1.5.13.5.7.2.4.1.3ColumnmacMcastGroupRowStatusread-createcurrentThe row status of the MAC multicast group entry.
1.3.6.1.4.1.890.1.5.13.5.7.2.5TablemcastInetGroupTablenot-accessiblecurrentA table that contains static multicast group information.
1.3.6.1.4.1.890.1.5.13.5.7.2.5.1RowmcastInetGroupEntrynot-accessiblecurrentThe entry of multicast group table.
1.3.6.1.4.1.890.1.5.13.5.7.2.5.1.1ColumnmcastGroupInetAddrTyperead-onlycurrentThe multicast IP address type of the group.
1.3.6.1.4.1.890.1.5.13.5.7.2.5.1.2ColumnmcastGroupInetAddrread-onlycurrentThe multicast IP address of the group.
1.3.6.1.4.1.890.1.5.13.5.7.2.5.1.3ColumnmcastGroupInetFixedPortsread-createcurrentThe port list which specify the ports joining the multicast group.
1.3.6.1.4.1.890.1.5.13.5.7.2.5.1.4ColumnmcastGroupInetForbiddenPortsread-createcurrentThe port list which specify the ports prohibited by the multicast group.
1.3.6.1.4.1.890.1.5.13.5.7.2.5.1.5ColumnmcastGroupInetRowStatusread-createcurrentThe row status of the multicast group entry.
1.3.6.1.4.1.890.1.5.13.5.7.3NodeigmpFilter
1.3.6.1.4.1.890.1.5.13.5.7.3.1ScalarmaxNumOfIgmpFiltersread-onlycurrentThe max number of IGMP filters supported by the system.
1.3.6.1.4.1.890.1.5.13.5.7.3.2TableigmpFilterTablenot-accessiblecurrentA table that contains IGMP filters.
1.3.6.1.4.1.890.1.5.13.5.7.3.2.1RowigmpFilterEntrynot-accessiblecurrentThe entry of IGMP filter table.
1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.1ColumnigmpFilterNameread-onlycurrentThe IGMP filter name.
1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.2ColumnigmpFilterIndexread-onlycurrentThe index which specif the filter rule.
1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.3ColumnigmpFilterStartIpread-createcurrentThe start IP of the filter rule.
1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.4ColumnigmpFilterEndIpread-createcurrentThe end IP of the filter rule.
1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.5ColumnigmpFilterRowStatusread-createcurrentThe row status of the IGMP filter entry.
1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.6ColumnigmpFilterInetAddrTyperead-createcurrentThe IP Address type.
1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.7ColumnigmpFilterInetAddrStartread-createcurrentThe start IP of the filter rule.
1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.8ColumnigmpFilterInetAddrEndread-createcurrentThe end IP of the filter rule.
1.3.6.1.4.1.890.1.5.13.5.7.3.3TableigmpFilterPortTablenot-accessiblecurrentThis table specif the IGMP filter of the port.
1.3.6.1.4.1.890.1.5.13.5.7.3.3.1RowigmpFilterPortEntrynot-accessiblecurrentAn entry in igmpFilterPortTable.
1.3.6.1.4.1.890.1.5.13.5.7.3.3.1.1ColumnigmpFilterPortFilterNameread-writecurrentThe IGMP filter name of the port.
1.3.6.1.4.1.890.1.5.13.5.7.3.4NodeigmpfilterBatchSet
1.3.6.1.4.1.890.1.5.13.5.7.3.4.1ScalarigmpfilterTargetread-writecurrentThis managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: the octet specifies …
1.3.6.1.4.1.890.1.5.13.5.7.3.4.2ScalarigmpfilterOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: set IGMP filter.
1.3.6.1.4.1.890.1.5.13.5.7.3.4.3ScalarigmpfilterForBatchSetread-writecurrentThe IGMP filter name.
1.3.6.1.4.1.890.1.5.13.5.7.4NodemcastBandwidth
1.3.6.1.4.1.890.1.5.13.5.7.4.1ScalarmcastDefaultBandwidthread-writecurrentDefault bandwidth requirement for a multicast channel. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.7.4.2ScalarmaxNumOfMcastBwread-onlycurrentThe maximum number of row entries that user can create in mcastBwTable. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.7.4.3TablemcastBwTablenot-accessiblecurrentThis table defines bandwidth budget for a range of multicast IP channels. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.7.4.3.1RowmcastBwEntrynot-accessiblecurrentAn entry of mcastBwTable.
1.3.6.1.4.1.890.1.5.13.5.7.4.3.1.1ColumnmcastBwIndexread-onlycurrentThe index which specify the entry.
1.3.6.1.4.1.890.1.5.13.5.7.4.3.1.2ColumnmcastBwStartIpread-onlycurrentThe start multicast IP of the bandwidth control range.
1.3.6.1.4.1.890.1.5.13.5.7.4.3.1.3ColumnmcastBwEndIpread-onlycurrentThe end multicast IP of the bandwidth control range.
1.3.6.1.4.1.890.1.5.13.5.7.4.3.1.4ColumnmcastBwBandwidthread-createcurrentThe bandwidth budget for the multicast IP channels.
1.3.6.1.4.1.890.1.5.13.5.7.4.3.1.5ColumnmcastBwRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.13.5.7.4.4TablemcastBwPortTablenot-accessiblecurrentThis table specify the multicast bandwidth control of the port. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.7.4.4.1RowmcastBwPortEntrynot-accessiblecurrentAn entry of mcastBwPortTable.
1.3.6.1.4.1.890.1.5.13.5.7.4.4.1.1ColumnmcastBwPortEnableread-writecurrentEnable/disable multicast bandwidth control for a port.
1.3.6.1.4.1.890.1.5.13.5.7.4.4.1.2ColumnmcastBwPortBandwidthread-writecurrentSet bandwidth threshold for a port.
1.3.6.1.4.1.890.1.5.13.5.7.4.5TablemcastBwInetTablenot-accessiblecurrentThis table defines bandwidth budget for a range of multicast IP channels for IPv6. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.7.4.5.1RowmcastBwInetEntrynot-accessiblecurrentAn entry of mcastBwInetTable.
1.3.6.1.4.1.890.1.5.13.5.7.4.5.1.1ColumnmcastBwInetIndexread-onlycurrentThe index which specify the entry.
1.3.6.1.4.1.890.1.5.13.5.7.4.5.1.2ColumnmcastBwInetAddrTyperead-onlycurrentThe ip address type of multicast IP.
1.3.6.1.4.1.890.1.5.13.5.7.4.5.1.3ColumnmcastBwInetAddrStartread-onlycurrentThe start multicast IP of the bandwidth control range.
1.3.6.1.4.1.890.1.5.13.5.7.4.5.1.4ColumnmcastBwInetAddrEndread-onlycurrentThe end multicast IP of the bandwidth control range.
1.3.6.1.4.1.890.1.5.13.5.7.4.5.1.5ColumnmcastBwInetBandwidthread-createcurrentThe bandwidth budget for the multicast IP channels.
1.3.6.1.4.1.890.1.5.13.5.7.4.5.1.6ColumnmcastBwInetRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.13.5.7.5NodeigmpCount
1.3.6.1.4.1.890.1.5.13.5.7.5.1TableigmpCountPortTablenot-accessiblecurrentThis table specify the IGMP count limiting of the port. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.7.5.1.1RowigmpCountPortEntrynot-accessiblecurrentAn entry of igmpCountPortTable.
1.3.6.1.4.1.890.1.5.13.5.7.5.1.1.1ColumnigmpCountPortEnableread-writecurrentEnable/disable IGMP count limiting for a port.
1.3.6.1.4.1.890.1.5.13.5.7.5.1.1.2ColumnigmpCountPortLimitread-writecurrentThe maximum allowed IGMP report count for a port.
1.3.6.1.4.1.890.1.5.13.5.7.5.2TableigmpMessageCountPortTablenot-accessiblecurrentThis table specify the IGMP message count limiting of the port.
1.3.6.1.4.1.890.1.5.13.5.7.5.2.1RowigmpMessageCountPortEntrynot-accessiblecurrentAn entry of igmpMessageCountPortTable.
1.3.6.1.4.1.890.1.5.13.5.7.5.2.1.1ColumnigmpMessageCountPortEnableread-writecurrentEnable/disable IGMP message count limiting for a port.
1.3.6.1.4.1.890.1.5.13.5.7.5.2.1.2ColumnigmpMessageCountPortLimitread-writecurrentThe maximum allowed IGMP message count for a port.
1.3.6.1.4.1.890.1.5.13.5.7.6Nodemvlan
1.3.6.1.4.1.890.1.5.13.5.7.6.1ScalarmaxNumOfMvlanread-onlycurrentThe maximum number of row entries that user can create in mvlanTable.
1.3.6.1.4.1.890.1.5.13.5.7.6.2TablemvlanTablenot-accessiblecurrentA table containing static configuration information for each multicast VLAN configured into the device.
1.3.6.1.4.1.890.1.5.13.5.7.6.2.1RowmvlanEntrynot-accessiblecurrentAn entry of mvlanTable.
1.3.6.1.4.1.890.1.5.13.5.7.6.2.1.1ColumnmvlanIndexread-onlycurrentThe VLAN-ID refering to this VLAN.
1.3.6.1.4.1.890.1.5.13.5.7.6.2.1.2ColumnmvlanNameread-createcurrentAn administratively assigned string, which may be used to identify the VLAN.
1.3.6.1.4.1.890.1.5.13.5.7.6.2.1.3ColumnmvlanEgressPortsread-createcurrentThe set of ports which are permanently assigned to the egress list for this multicast VLAN.
1.3.6.1.4.1.890.1.5.13.5.7.6.2.1.4ColumnmvlanRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.890.1.5.13.5.7.6.2.1.5Columnmvlan8021pPriorityread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.7.6.3TablemvlanTranslateTablenot-accessiblecurrentA table that contains multicast to VLAN translation.
1.3.6.1.4.1.890.1.5.13.5.7.6.3.1RowmvlanTranslateEntrynot-accessiblecurrentAn entry of mvlanTranslateTable.
1.3.6.1.4.1.890.1.5.13.5.7.6.3.1.1ColumnmvlanTranslateIndexread-onlycurrentThe index which specif the entry.
1.3.6.1.4.1.890.1.5.13.5.7.6.3.1.2ColumnmvlanTranslateStartIpread-writecurrentThe start IP of the multicast VLAN translation.
1.3.6.1.4.1.890.1.5.13.5.7.6.3.1.3ColumnmvlanTranslateEndIpread-writecurrentThe end IP of the multicast VLAN translation.
1.3.6.1.4.1.890.1.5.13.5.7.6.3.1.4ColumnmvlanTranslateInetAddrTyperead-writecurrentThe IP Address type.
1.3.6.1.4.1.890.1.5.13.5.7.6.3.1.5ColumnmvlanTranslateInetAddrStartread-writecurrentThe start IP of the multicast VLAN translation.
1.3.6.1.4.1.890.1.5.13.5.7.6.3.1.6ColumnmvlanTranslateInetAddrEndread-writecurrentThe end IP of the multicast VLAN translation.
1.3.6.1.4.1.890.1.5.13.5.7.6.4TablemvlanExtTablenot-accessiblecurrentA table that contains MVLAN.
1.3.6.1.4.1.890.1.5.13.5.7.6.4.1RowmvlanExtEntrynot-accessiblecurrentAn entry of mvlanExtTable.
1.3.6.1.4.1.890.1.5.13.5.7.6.4.1.1ColumnmvlanExtRegread-writecurrentEgress or forbid to the Multicast VLAN.
1.3.6.1.4.1.890.1.5.13.5.7.6.4.1.2ColumnmvlanExtCvidread-writecurrentCustomer VLAN
1.3.6.1.4.1.890.1.5.13.5.7.6.5ScalarmvlanNonmemberPortread-writecurrentset this object to 'discard' so that the system discards IGMP/MLD reports if the subscriber port is not a member of the MVLAN which the group address belong to…
1.3.6.1.4.1.890.1.5.13.5.7.7NodequeryVid
1.3.6.1.4.1.890.1.5.13.5.7.7.1ScalarmaxNumOfQryVidread-onlycurrentThe maximum number of row entries that user can create in qryVidConfTable. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.7.7.2TableqryVidConfTablenot-accessiblecurrentThis table defines statically set VLANs used for response IGMP report. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.7.7.2.1RowqryVidConfEntrynot-accessiblecurrentAn entry in qryVidConfTable.
1.3.6.1.4.1.890.1.5.13.5.7.7.2.1.1ColumnqryVidread-onlycurrentVLAN ID.
1.3.6.1.4.1.890.1.5.13.5.7.7.2.1.2ColumnqryVidRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.890.1.5.13.5.7.7.3TableqryVidStatusTablenot-accessiblecurrentThis table shows statically set or dynamically learned VLANs used for response IGMP report.
1.3.6.1.4.1.890.1.5.13.5.7.7.3.1RowqryVidStatusEntrynot-accessiblecurrentAn entry in qryVidStatusTable.
1.3.6.1.4.1.890.1.5.13.5.7.7.3.1.1ColumnqryVidTyperead-onlycurrentVLAN type.
1.3.6.1.4.1.890.1.5.13.5.7.8ScalarigmpModeread-writecurrentSetting IGMP with aggresive mode will issue an IGMP report from new active port when topology change occurs, while normal mode won't.
1.3.6.1.4.1.890.1.5.13.5.7.9ScalarigmpVersionread-writecurrentSetting IGMP version. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.7.10ScalarigmpFastLeaveEnableread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.7.11ScalarigmpFastLeaveTimerread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.7.12ScalarunknownMulticastread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.7.13Scalaripv6PassThroughread-writecurrentSet IPv6 packet transparent passthrough.
1.3.6.1.4.1.890.1.5.13.5.7.14ScalarreservedGroupread-writecurrentSet reserved packets transparent passthrougth
1.3.6.1.4.1.890.1.5.13.5.7.15TableigmpHistoryTablenot-accessiblecurrentThis table contains multicast IGMP/MLD history configuration.
1.3.6.1.4.1.890.1.5.13.5.7.15.1RowigmpHistoryEntrynot-accessiblecurrentThe entry of multicast igmp history table.
1.3.6.1.4.1.890.1.5.13.5.7.15.1.1Columnigmphistoryenableread-writecurrentEnable/disable IGMP/MLD multicast group join/leave history logging.
1.3.6.1.4.1.890.1.5.13.5.8Nodeport
1.3.6.1.4.1.890.1.5.13.5.8.1TablesubrPortTablenot-accessiblecurrentThis table includes subscriber attributes for the port.
1.3.6.1.4.1.890.1.5.13.5.8.1.1RowsubrPortEntrynot-accessiblecurrentAn entry in subrPortTable.
1.3.6.1.4.1.890.1.5.13.5.8.1.1.1ColumnsubrPortNameread-writecurrentName of the subscriber.
1.3.6.1.4.1.890.1.5.13.5.8.1.1.2ColumnsubrPortTelread-writecurrentTelephone number of the subscriber.
1.3.6.1.4.1.890.1.5.13.5.8.1.1.3ColumnsubrPortMdfread-writecurrentMDF information of this subscriber port
1.3.6.1.4.1.890.1.5.13.5.8.2NodeadslPort
1.3.6.1.4.1.890.1.5.13.5.8.2.1TableadslLineConfTablenot-accessiblecurrentThis table includes common attributes describing the ADSL line.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1RowadslLineConfEntrynot-accessiblecurrentAn entry in adslLineConfTable.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.1ColumnadslLineConfAdslModeread-writecurrentG.lite and T1.413 are only applicable to annex A board. ETSI is only applicable to annex B board.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.2ColumnadslLineConfAnnexLread-writecurrentEnable/disable annex L for the port.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.3ColumnadslLineConfAnnexMread-writecurrentEnable/disable annex M for the port.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.4ColumnadslLineConfAnnexIread-writecurrentEnable/disable annex I for the port.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.5ColumnadslLineConfOptionMaskread-writecurrentThe semantic for each bit is: BIT 1 : Disable Trellis BIT 2 : Disable Reed-Solomon BIT 3 : Disable upstream bitswap BIT 4 : Disable downstream bitswap BIT 5 : …
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.6ColumnadslLineConfPowerMgmtread-writecurrentEnable/disable power management for the port.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.7ColumnadslLineConfPowerModeread-writecurrentThe power mode of the ADSL line.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.8ColumnadslLineConfAturMaxTxPowerread-writecurrentThe maximum allowed transmit power of ATU-R.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.9ColumnadslLineConfAtucMaxTxPowerread-writecurrentThe maximum allowed transmit power of ATU-C.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.10ColumnadslLineConfMaxRxPowerread-writecurrentThe maximum aggregate received power.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.11ColumnadslLineConfAturCarrierMaskread-writecurrentThe upstream carrier mask from bin 0 to 63. Bit set to 1 indicates the bin is masked off.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.12ColumnadslLineConfAtucCarrierMask0read-writecurrentThe downstream carrier mask from bin 32 to 255. Bit set to 1 indicates the bin is masked off.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.13ColumnadslLineConfAtucCarrierMask1read-writecurrentThe downstream carrier mask from bin 256 to 511. Bit set to 1 indicates the bin is masked off.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.14ColumnadslLineConfAturInpread-writecurrentThe upstream Impulse Noise Protection minimum setting in unit of DMT symbol.
1.3.6.1.4.1.890.1.5.13.5.8.2.1.1.15ColumnadslLineConfAtucInpread-writecurrentThe downstream Impulse Noise Protection minimum setting in unit of DMT symbol.
1.3.6.1.4.1.890.1.5.13.5.8.2.2NodebitLoad
1.3.6.1.4.1.890.1.5.13.5.8.2.2.1TablebitLoadTablenot-accessiblecurrentThis table provides the number of bits per carrier for each ADSL port.
1.3.6.1.4.1.890.1.5.13.5.8.2.2.1.1RowbitLoadEntrynot-accessiblecurrentAn entry in bitLoadTable.
1.3.6.1.4.1.890.1.5.13.5.8.2.2.1.1.1ColumnbitLoadBitsread-onlycurrentThis object provides the number of bits for all carriers in the port. The first octet specify the number of bits for carrier 1, and the second octet specify th…
1.3.6.1.4.1.890.1.5.13.5.8.2.2.1.1.2ColumnbitLoadAtucNumOfCarriersread-onlycurrentThe number of carriers for ATU-C.
1.3.6.1.4.1.890.1.5.13.5.8.2.2.1.1.3ColumnbitLoadAturNumOfCarriersread-onlycurrentThe number of carriers for ATU-R.
1.3.6.1.4.1.890.1.5.13.5.8.2.3NodeadslPortBatchSet
1.3.6.1.4.1.890.1.5.13.5.8.2.3.1ScalaradslPortTargetread-writecurrentThe managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: the octet specifies a…
1.3.6.1.4.1.890.1.5.13.5.8.2.3.2ScalaradslPortOpsread-writecurrentThe managed object is for ADSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the correspond…
1.3.6.1.4.1.890.1.5.13.5.8.2.3.3ScalaradslModeForBatchSetread-writecurrentG.lite and T1.413 are only applicable to annex A board. ETSI is only applicable to annex B board.
1.3.6.1.4.1.890.1.5.13.5.8.2.3.4ScalaradslLineProfileForBatchSetread-writecurrentThe ADSL line profile.
1.3.6.1.4.1.890.1.5.13.5.8.2.3.5ScalaradslAlarmProfileForBatchSetread-writecurrentThe ADSL alarm profile.
1.3.6.1.4.1.890.1.5.13.5.8.2.3.6ScalaradslOptionMaskForBatchSetread-writecurrentThe semantic for each bit is identical to the object adslLineConfOptionMask.
1.3.6.1.4.1.890.1.5.13.5.8.2.3.7ScalaradslAturMaxTxPowerForBatchSetread-writecurrentThe maximum allowed transmit power of ATU-R.
1.3.6.1.4.1.890.1.5.13.5.8.2.3.8ScalaradslAtucMaxTxPowerForBatchSetread-writecurrentThe maximum allowed transmit power of ATU-C.
1.3.6.1.4.1.890.1.5.13.5.8.2.3.9ScalaradslMaxRxPowerForBatchSetread-writecurrentThe maximum aggregate received power.
1.3.6.1.4.1.890.1.5.13.5.8.2.3.10ScalaradslAturCarrierMaskForBatchSetread-writecurrentThe upstream carrier mask from bin 0 to 63. Bit set to 1 indicates the bin is masked off.
1.3.6.1.4.1.890.1.5.13.5.8.2.3.11ScalaradslAtucCarrierMask0ForBatchSetread-writecurrentThe downstream carrier mask from bin 32 to 255. Bit set to 1 indicates the bin is masked off.
1.3.6.1.4.1.890.1.5.13.5.8.2.3.12ScalaradslAtucCarrierMask1ForBatchSetread-writecurrentThe downstream carrier mask from bin 256 to 511. Bit set to 1 indicates the bin is masked off.
1.3.6.1.4.1.890.1.5.13.5.8.2.3.13ScalaradslAturInpForBatchSetread-writecurrentThe upstream Impulse Noise Protection minimum setting in unit of DMT symbol.
1.3.6.1.4.1.890.1.5.13.5.8.2.3.14ScalaradslAtucInpForBatchSetread-writecurrentThe downstream Impulse Noise Protection minimum setting in unit of DMT symbol.
1.3.6.1.4.1.890.1.5.13.5.8.2.4TableadslLineStatusTablenot-accessiblecurrentThis table includes the ADSL line status.
1.3.6.1.4.1.890.1.5.13.5.8.2.4.1RowadslLineStatusEntrynot-accessiblecurrentAn entry in adslLineStatusTable.
1.3.6.1.4.1.890.1.5.13.5.8.2.4.1.1ColumnadslLineStatusModeread-onlycurrentThe link up mode of the ADSL line. The following items is added from R5.05 8: adsl2Annexi(8) 9: adsl2Annexl(9) 10: adsl2AnnexlNarrow(10) 11: adsl2Annexm(11) 12…
1.3.6.1.4.1.890.1.5.13.5.8.2.4.1.2ColumnadslLineStatusUpTimeread-onlycurrentThe time since the ADSL line link up.
1.3.6.1.4.1.890.1.5.13.5.8.2.4.1.3ColumnadslLineStatusAturInpread-onlycurrentThe upstream Impulse Noise Protection in unit of 0.1 DMT symbol.
1.3.6.1.4.1.890.1.5.13.5.8.2.4.1.4ColumnadslLineStatusAtucInpread-onlycurrentThe downstream Impulse Noise Protection in unit of 0.1 DMT symbol.
1.3.6.1.4.1.890.1.5.13.5.8.2.5TablepowerMgmtParamTablenot-accessiblecurrentThis table defines L0 to L2 power transition parameters. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.2.5.1RowpowerMgmtParamEntrynot-accessiblecurrentAn entry in powerMgmtParamTable.
1.3.6.1.4.1.890.1.5.13.5.8.2.5.1.1ColumnpowerMgmtL0Timeread-writecurrentThe object specifies the minimum time in L0 mode before L2 mode may be entered.
1.3.6.1.4.1.890.1.5.13.5.8.2.5.1.2ColumnpowerMgmtL2Timeread-writecurrentThe object specifies the minimum time in L2 mode before trimming and in between power trims.
1.3.6.1.4.1.890.1.5.13.5.8.2.5.1.3ColumnpowerMgmtL2Atprread-writecurrentThe maximum aggregate transmit power.
1.3.6.1.4.1.890.1.5.13.5.8.2.5.1.4ColumnpowerMgmtL2Atprtread-writecurrentThe maximum total aggregate transmit power.
1.3.6.1.4.1.890.1.5.13.5.8.2.5.1.5ColumnpowerMgmtL2MinRateread-writecurrentThe object specifies the minimum L2 rate.
1.3.6.1.4.1.890.1.5.13.5.8.2.5.1.6ColumnpowerMgmtL2MaxRateread-writecurrentThe object specifies the maximum L2 rate.
1.3.6.1.4.1.890.1.5.13.5.8.2.5.1.7ColumnpowerMgmtL2ThreshRateread-writecurrentThe object specifies the rate threshold that triggers the line entering L0 or L2 mode.
1.3.6.1.4.1.890.1.5.13.5.8.2.6TablepowerMgmtPSDTablenot-accessiblecurrentThis table provides the PSD setting for both ATU-C and ATU-R. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.2.6.1RowpowerMgmtPSDEntrynot-accessiblecurrentAn entry in powerMgmtPSDTable.
1.3.6.1.4.1.890.1.5.13.5.8.2.6.1.1ColumnpowerMgmtAtucMaxPSDread-writecurrentThe object specifies the maximum ATU-C PSD.
1.3.6.1.4.1.890.1.5.13.5.8.2.6.1.2ColumnpowerMgmtAturMaxPSDread-writecurrentThe object specifies the maximum ATU-R PSD.
1.3.6.1.4.1.890.1.5.13.5.8.3NodeshdslPort
1.3.6.1.4.1.890.1.5.13.5.8.3.1TableshdslLineConfTablenot-accessiblecurrentThis table includes common attributes describing the SHDSL line.
1.3.6.1.4.1.890.1.5.13.5.8.3.1.1RowshdslLineConfEntrynot-accessiblecurrentAn entry in shdslLineConfTable.
1.3.6.1.4.1.890.1.5.13.5.8.3.1.1.1ColumnshdslLineConfShdslModeread-writecurrentMode of the SHDSL port. This MIB object is not supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.3.1.1.2ColumnshdslLineConfPmmsread-writecurrentNegotiated noise margin mode of the SHDSL port.
1.3.6.1.4.1.890.1.5.13.5.8.3.1.1.3ColumnshdslLineConfPboModeread-writecurrentPower backoff mode of the SHDSL port.
1.3.6.1.4.1.890.1.5.13.5.8.3.1.1.4ColumnshdslLineConfPboValueread-writecurrentPower backoff value of the SHDSL port.
1.3.6.1.4.1.890.1.5.13.5.8.3.1.1.5ColumnshdslLineConfModulationread-writecurrentModulation mode of the SHDSL port. This MIB object is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.3.1.1.6ColumnshdslLineConfTCModeread-writecurrentTransmission Convergence layer. This MIB object is supported by R5.05 and later versions. 1: atm 2: efm
1.3.6.1.4.1.890.1.5.13.5.8.3.2NodeshdslPortBatchSet
1.3.6.1.4.1.890.1.5.13.5.8.3.2.1ScalarshdslPortTargetread-writecurrentThe managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: the octet specifies a…
1.3.6.1.4.1.890.1.5.13.5.8.3.2.2ScalarshdslPortOpsread-writecurrentThe managed object is for SHDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the correspon…
1.3.6.1.4.1.890.1.5.13.5.8.3.2.3ScalarshdslModeForBatchSetread-writecurrentMode of the SHDSL port.
1.3.6.1.4.1.890.1.5.13.5.8.3.2.4ScalarshdslLineProfileForBatchSetread-writecurrentThe SHDSL line profile.
1.3.6.1.4.1.890.1.5.13.5.8.3.2.5ScalarshdslAlarmProfileForBatchSetread-writecurrentThe SHDSL alarm profile.
1.3.6.1.4.1.890.1.5.13.5.8.3.2.6ScalarshdslPboValueForBatchSetread-writecurrentPower backoff value of the SHDSL port.
1.3.6.1.4.1.890.1.5.13.5.8.3.3TableshdslLineStatusTablenot-accessiblecurrentThis table includes the SHDSL line status.
1.3.6.1.4.1.890.1.5.13.5.8.3.3.1RowshdslLineStatusEntrynot-accessiblecurrentAn entry in shdslLineStatusTable.
1.3.6.1.4.1.890.1.5.13.5.8.3.3.1.1ColumnshdslLineStatusWirePairread-onlycurrentThe link-up wire pair of the SHDSL line.
1.3.6.1.4.1.890.1.5.13.5.8.4Nodepvc
1.3.6.1.4.1.890.1.5.13.5.8.4.1ScalarmaxNumOfPvcsread-onlycurrentThe maximum number of PVCs which could be created on a port.
1.3.6.1.4.1.890.1.5.13.5.8.4.2TablepvcTablenot-accessiblecurrentThis table includes PVC configuration.
1.3.6.1.4.1.890.1.5.13.5.8.4.2.1RowpvcEntrynot-accessiblecurrentAn entry in pvcTable.
1.3.6.1.4.1.890.1.5.13.5.8.4.2.1.1ColumnpvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.4.2.1.2ColumnpvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.4.2.1.3ColumnpvcPvidread-onlycurrentDefault VID of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.4.2.1.4ColumnpvcEncapread-createcurrentEncapsulation of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.4.2.1.5ColumnpvcPriorityread-createcurrent802.1p default priority of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.4.2.1.6ColumnpvcProfileread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc.
1.3.6.1.4.1.890.1.5.13.5.8.4.2.1.7ColumnpvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.4.2.1.8ColumnpvcMvlanEnableread-createcurrentEnable/disable multicast VLAN function for the PVC. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.4.2.1.9ColumnpvcAcNameread-createcurrentAccess concentrator name.
1.3.6.1.4.1.890.1.5.13.5.8.4.2.1.10ColumnpvcServiceNameread-createcurrentService name.
1.3.6.1.4.1.890.1.5.13.5.8.4.2.1.11ColumnpvcHelloTimeread-createcurrentThe system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
1.3.6.1.4.1.890.1.5.13.5.8.4.3TablepvcVlanTablenot-accessiblecurrentThis table includes the VLAN configuration for each PVC.
1.3.6.1.4.1.890.1.5.13.5.8.4.3.1RowpvcVlanEntrynot-accessiblecurrentAn entry in pvcVlanTable.
1.3.6.1.4.1.890.1.5.13.5.8.4.3.1.1ColumnpvcVlanRegread-createcurrentThe PVC is egress or forbidden for this VLAN.
1.3.6.1.4.1.890.1.5.13.5.8.4.3.1.2ColumnpvcVlanTagread-createcurrentThe PVC should transmit egress packets for this VLAN as tagged or untagged.
1.3.6.1.4.1.890.1.5.13.5.8.4.3.1.3ColumnpvcVlanRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.4.4TablepvcUsRateLimitTablenot-accessiblecurrentThis table defines the upstream rate limit for each PVC. This table is supported by R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.4.4.1RowpvcUsRateLimitEntrynot-accessiblecurrentAn entry in pvcUsRateLimitTable.
1.3.6.1.4.1.890.1.5.13.5.8.4.4.1.1ColumnpvcUsRateLimitEnableread-writecurrentEnable/disable upstream rate limit for a PVC.
1.3.6.1.4.1.890.1.5.13.5.8.4.4.1.2ColumnpvcUsRateLimitread-writecurrentUpstream rate limit in Kbps for a PVC.
1.3.6.1.4.1.890.1.5.13.5.8.4.5TablepvcPvlanTablenot-accessiblecurrentThis table includes the PVLAN configuration for each PVC.
1.3.6.1.4.1.890.1.5.13.5.8.4.5.1RowpvcPvlanEntrynot-accessiblecurrentAn entry in pvcPvlanTable.
1.3.6.1.4.1.890.1.5.13.5.8.4.5.1.1ColumnpvcPvlanEtyperead-onlycurrentPVC PVLAN Etype(0600~FFFF).
1.3.6.1.4.1.890.1.5.13.5.8.4.5.1.2ColumnpvcPvlanVidread-onlycurrentPVC PVLAN Vid(1~4094).
1.3.6.1.4.1.890.1.5.13.5.8.4.5.1.3ColumnpvcPvlanPriorityread-createcurrentPVC PVLAN Priority(0~7).
1.3.6.1.4.1.890.1.5.13.5.8.4.5.1.4ColumnpvcPvlanRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.4.6TablepvcXvlanTablenot-accessiblecurrentThis table includes the XVLAN configuration for each PVC.
1.3.6.1.4.1.890.1.5.13.5.8.4.6.1RowpvcXvlanEntrynot-accessiblecurrentAn entry in pvcXvlanTable.
1.3.6.1.4.1.890.1.5.13.5.8.4.6.1.1ColumnpvcXvlanCvidread-onlycurrentPVC XVLAN Cvid(1~4094).
1.3.6.1.4.1.890.1.5.13.5.8.4.6.1.2ColumnpvcXvlanSvidread-onlycurrentPVC XVLAN Svid(1~4094).
1.3.6.1.4.1.890.1.5.13.5.8.4.6.1.3ColumnpvcXvlanCvidsread-onlycurrentPVC XVLAN Cvids(1~4094).
1.3.6.1.4.1.890.1.5.13.5.8.4.6.1.4ColumnpvcXvlanRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.5Nodeppvc
1.3.6.1.4.1.890.1.5.13.5.8.5.1ScalarmaxNumOfPriorityPvcsread-onlycurrentThe maximum number of priority PVCs which could be created on a port.
1.3.6.1.4.1.890.1.5.13.5.8.5.2TableppvcTablenot-accessiblecurrentThis table includes priority PVC configuration.
1.3.6.1.4.1.890.1.5.13.5.8.5.2.1RowppvcEntrynot-accessiblecurrentAn entry in ppvcTable.
1.3.6.1.4.1.890.1.5.13.5.8.5.2.1.1ColumnppvcVpiread-onlycurrentVPI of the ppvc.
1.3.6.1.4.1.890.1.5.13.5.8.5.2.1.2ColumnppvcVciread-onlycurrentVCI of the ppvc.
1.3.6.1.4.1.890.1.5.13.5.8.5.2.1.3ColumnppvcPvidread-onlycurrentDefault VID of the ppvc.
1.3.6.1.4.1.890.1.5.13.5.8.5.2.1.4ColumnppvcEncapread-createcurrentEncapsulation of the ppvc.
1.3.6.1.4.1.890.1.5.13.5.8.5.2.1.5ColumnppvcPriorityread-createcurrent802.1p default priority of the ppvc.
1.3.6.1.4.1.890.1.5.13.5.8.5.2.1.6ColumnppvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.5.3TableppvcVlanTablenot-accessiblecurrentThis table includes the VLAN configuration for each priority PVC.
1.3.6.1.4.1.890.1.5.13.5.8.5.3.1RowppvcVlanEntrynot-accessiblecurrentAn entry in ppvcVlanTable.
1.3.6.1.4.1.890.1.5.13.5.8.5.3.1.1ColumnppvcVlanRegread-createcurrentThe PVC is egress or forbidden for this VLAN.
1.3.6.1.4.1.890.1.5.13.5.8.5.3.1.2ColumnppvcVlanTagread-createcurrentThe PVC should transmit egress packets for this VLAN as tagged or untagged.
1.3.6.1.4.1.890.1.5.13.5.8.5.3.1.3ColumnppvcVlanRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.5.4TableppvcMemberTablenot-accessiblecurrentThis table includes priority PVC member configuration.
1.3.6.1.4.1.890.1.5.13.5.8.5.4.1RowppvcMemberEntrynot-accessiblecurrentAn entry in ppvcMemberTable.
1.3.6.1.4.1.890.1.5.13.5.8.5.4.1.1ColumnppvcMemberVpiread-onlycurrentVPI of the member ppvc.
1.3.6.1.4.1.890.1.5.13.5.8.5.4.1.2ColumnppvcMemberVciread-onlycurrentVCI of the member ppvc.
1.3.6.1.4.1.890.1.5.13.5.8.5.4.1.3ColumnppvcMemberPriorityread-onlycurrent802.1p default priority of the member ppvc.
1.3.6.1.4.1.890.1.5.13.5.8.5.4.1.4ColumnppvcMemberProfileread-createcurrentThe profile of the member ppvc.
1.3.6.1.4.1.890.1.5.13.5.8.5.4.1.5ColumnppvcMemberRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.6NodeportOperation
1.3.6.1.4.1.890.1.5.13.5.8.6.1ScalarportTargetread-writecurrentThe managed object is used for identify the target on which the port configuration should be performed. The target is encoded as: Byte 1: the octet specifies a…
1.3.6.1.4.1.890.1.5.13.5.8.6.2ScalarportOpsread-writecurrentThe managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the correspond…
1.3.6.1.4.1.890.1.5.13.5.8.7NodepvcStats
1.3.6.1.4.1.890.1.5.13.5.8.7.1TablepvcStatsTablenot-accessiblecurrentThis table includes PVC statistics.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1RowpvcStatsEntrynot-accessiblecurrentAn entry in pvcStatsTable.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.1ColumnpvcStatsTxRateread-onlycurrentTransmission Rate (byte/sec) on the PVC.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.2ColumnpvcStatsRxRateread-onlycurrentReceive rate (byte/sec) on the PVC.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.3ColumnpvcStatsTxCellsread-onlycurrentThe number of transmitted cells on the PVC since last counter reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.4ColumnpvcStatsRxCellsread-onlycurrentThe number of received packets on the PVC since last counter reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.5ColumnpvcStatsCrcErrorsread-onlycurrentThe number of detected CRC errors on the PVC since last counter reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.6ColumnpvcStatsTxPacketsread-onlycurrentThis object is supported by R1.02 and later versions. The number of transmitted packets on the PVC since last counter reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.7ColumnpvcStatsRxPacketsread-onlycurrentThis object is supported by R1.02 and later versions. The number of received packets on the PVC since last counter reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.8ColumnpvcStatsTxUnicastread-onlycurrentThis object is supported by R1.02 and later versions. The number of transmitted unicast packets on the PVC since last counter reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.9ColumnpvcStatsRxUnicastread-onlycurrentThis object is supported by R1.02 and later versions. The number of received unicast packets on the PVC since last counter reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.10ColumnpvcStatsTxMulticastread-onlycurrentThis object is supported by R1.02 and later versions. The number of transmitted multicast packets on the PVC since last counter reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.11ColumnpvcStatsRxMulticastread-onlycurrentThis object is supported by R1.02 and later versions. The number of received multicast packets on the PVC since last counter reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.12ColumnpvcStatsTxBroadcastread-onlycurrentThis object is supported by R1.02 and later versions. The number of transmitted broadcast packets on the PVC since last counter reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.13ColumnpvcStatsRxBroadcastread-onlycurrentThis object is supported by R1.02 and later versions. The number of received broadcast packets on the PVC since last counter reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.14ColumnpvcStatsTxDiscardread-onlycurrentThis object is supported by R1.02 and later versions. The number of discarded packets when transmitted on the PVC since last counter reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.1.1.15ColumnpvcStatsRxDiscardread-onlycurrentThis object is supported by R1.02 and later versions. The number of discarded packets when received on the PVC since last counter reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.2ScalarpvcCounterIfIndexread-writecurrentIfIndex of the PVC whose counters would be reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.3ScalarpvcCounterVpiread-writecurrentVPI of the PVC whose counters would be reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.4ScalarpvcCounterVciread-writecurrentVCI of the PVC whose counters would be reset.
1.3.6.1.4.1.890.1.5.13.5.8.7.5ScalarpvcCounterResetread-writecurrentSet the object to 1 to reset PVC counters for the PVC which is identified by pvcCounterIfIndex, pvcCounterVpi, and pvcCounterVci.
1.3.6.1.4.1.890.1.5.13.5.8.8Nodepaepvc
1.3.6.1.4.1.890.1.5.13.5.8.8.1TablepaepvcTablenot-accessiblecurrentThis table includes PPPoAoE PVC configuration. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.8.1.1RowpaepvcEntrynot-accessiblecurrentAn entry of paepvcTable.
1.3.6.1.4.1.890.1.5.13.5.8.8.1.1.1ColumnpaepvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.8.1.1.2ColumnpaepvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.8.1.1.3ColumnpaepvcPvidread-onlycurrentDefault VID of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.8.1.1.4ColumnpaepvcEncapread-createcurrentEncapsulation of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.8.1.1.5ColumnpaepvcPriorityread-createcurrent802.1p default priority of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.8.1.1.6ColumnpaepvcProfileread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc.
1.3.6.1.4.1.890.1.5.13.5.8.8.1.1.7ColumnpaepvcAcNameread-createcurrentAccess concentrator name.
1.3.6.1.4.1.890.1.5.13.5.8.8.1.1.8ColumnpaepvcServiceNameread-createcurrentService name.
1.3.6.1.4.1.890.1.5.13.5.8.8.1.1.9ColumnpaepvcHelloTimeread-createcurrentThe system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
1.3.6.1.4.1.890.1.5.13.5.8.8.1.1.10ColumnpaepvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.9Nodetlspvc
1.3.6.1.4.1.890.1.5.13.5.8.9.1TabletlspvcTablenot-accessiblecurrentThis table includes Transparent LAN Service (TLS) PVC configuration. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.9.1.1RowtlspvcEntrynot-accessiblecurrentAn entry of tlspvcTable.
1.3.6.1.4.1.890.1.5.13.5.8.9.1.1.1ColumntlspvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.9.1.1.2ColumntlspvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.9.1.1.3ColumntlspvcSvidread-onlycurrents-tag VLAN ID of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.9.1.1.4ColumntlspvcEncapread-createcurrentEncapsulation of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.9.1.1.5ColumntlspvcSpriorityread-createcurrents-tag priority of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.9.1.1.6ColumntlspvcProfileread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc.
1.3.6.1.4.1.890.1.5.13.5.8.9.1.1.7ColumntlspvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.10NodevdslPort
1.3.6.1.4.1.890.1.5.13.5.8.10.1TablevdslLineConfTablenot-accessiblecurrentThis table includes common attributes describing the VDSL line. This table is supported by R2.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1RowvdslLineConfEntrynot-accessiblecurrentAn entry in vdslLineConfTable.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.1ColumnvdslLineConfUpboread-writecurrentEnable/disable upstream power backoff control.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.2ColumnvdslLineConfVdslProfileread-writecurrentSet VDSL profile.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.3ColumnvdslLineConfFrequencyPlanread-writecurrentSet VDSL frequency plan.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.4ColumnvdslLineConfRfiBandread-writecurrentSet VDSL customized RFI configuration. disable: not apply RFI notch to port ansi: use pre-defined ANSI RFI notch etsi: use pre-defined ETSI notch custom: user …
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.5ColumnvdslLineConfIpqosProfileread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.6ColumnvdslLineConfVturInpread-writecurrentThis object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.7ColumnvdslLineConfVtucInpread-writecurrentThis object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.8ColumnvdslLineConfOptionMaskread-writecurrentThis object is supported by R5.01 and later versions. Bit1: disable Trellis coding in ADSL mode Bit2: disable Reed-Solomon coding for ADSL Bit3: disable upstre…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.9ColumnvdslLineConfUpboForceLengthread-writecurrent-1 means auto electric length. This object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.10ColumnvdslLineConfPsdShaperead-writecurrentThis object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.11ColumnvdslLineConfDpboread-writecurrentThis object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.12ColumnvdslLineConfDpboParamEselread-writecurrentThis object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.13ColumnvdslLineConfDpboParamEscmaread-writecurrent-1~-1.5 in step of 1/256. This object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.14ColumnvdslLineConfDpboParamEscmbread-writecurrent-1~-1.5 in step of 1/256. This object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.15ColumnvdslLineConfDpboParamEscmcread-writecurrent-1~-1.5 in step of 1/256. This object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.16ColumnvdslLineConfDpboParamMusread-writecurrentThis object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.17ColumnvdslLineConfDpboParamFminread-writecurrentThis object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.18ColumnvdslLineConfDpboParamFmaxread-writecurrentThis object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.19ColumnvdslLineConfDpboParamPsdIdread-writecurrentAlways return 0 when read. This object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.20ColumnvdslLineConfCompatibleread-writecurrentCompatible to spectrum usage of adsl2 or adsl2+ line. The object is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.21ColumnvdslLineConfPowerModeread-writecurrentThe power mode of the VDSL line. This MIB object is supported by R5.05 and later versions. 1: fix 2: priorityToPower 3: priorityToRate
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.22ColumnvdslLineConfVturMaxTxPowerread-writecurrentThe maximum allowed transmit power of VTU-R. -130~200
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.23ColumnvdslLineConfVtucMaxTxPowerread-writecurrentThe maximum allowed transmit power of VTU-C. -50~200
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.24ColumnvdslLineConfMaxRxPowerread-writecurrentThe maximum aggregate received power. -255~255
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.25ColumnvdslLineConfPMaskread-writecurrentTo configure a bit mask to select preferred protocols : 0x00000001~0xffffffff 0x00000001 G.992.1 A|B 0x00000002 G.992.2 A 0x00000004 G.992.3 A|B 0x00000010 G.9…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.26ColumnvdslLineConfAturCarrierMaskread-writecurrentSub-carrier masking for ADSL2+ fallback, Upstream sub-carrier mask.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.27ColumnvdslLineConfAtucCarrierMask0read-writecurrentSub-carrier masking for ADSL2+ fallback, Downstream sub-carrier mask.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.28ColumnvdslLineConfAtucCarrierMask1read-writecurrentSub-carrier masking for ADSL2+ fallback, Downstream sub-carrier mask.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.29ColumnvdslLineConfSnrModeDsread-writecurrentTo enable the transmitter referred virtual noise in the downstream direction. 1: enable(1) 2: disable(2)
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.30ColumnvdslLineConfSnrModeUsread-writecurrentTo enable the transmitter referred virtual noise in the upstream direction. 1: enable(1) 2: disable(2)
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.31ColumnvdslLineConfTxRefVnDsread-writecurrentTo configure downstream transmitter referred virtual noise.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.32ColumnvdslLineConfTxRefVnUsread-writecurrentTo configure upstream transmitter referred virtual noise.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.33ColumnvdslLineConfTpstcTypeAdslread-writecurrentTPS-TC type for ADSL mode VLC. 1: atm(1) 2: ptm(2)
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.34ColumnvdslLineConfTpstcTypeVdslread-writecurrentTPS-TC type for VDSL mode VLC. 1: atm(1) 2: ptm(2)
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.35ColumnvdslLineConfVturInmEqread-writecurrentThe INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM_INPEQ_MODE defines the way of computation of Equivalent INP, as defined in ITU-T…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.36ColumnvdslLineConfVtucInmEqread-writecurrentThe INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM_INPEQ_MODE defines the way of computation of Equivalent INP, as defined in ITU-T…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.37ColumnvdslLineConfInmVturCCread-writecurrentThe INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbo…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.38ColumnvdslLineConfInmVtucCCread-writecurrentThe INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbo…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.39ColumnvdslLineConfInmVturIATOread-writecurrentThe INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.40ColumnvdslLineConfInmVtucIATOread-writecurrentThe INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.41ColumnvdslLineConfInmVturIATSread-writecurrentThe INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.42ColumnvdslLineConfInmVtucIATSread-writecurrentThe INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.43ColumnvdslLineConfInmVtucISDBUSread-writecurrentISDD sensitivity of VTU-C,-128~127 in unit of 0.1dB.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.44ColumnvdslLineConfGinpRtxModeDsread-writecurrentG.inp(G.998.4) support setting on downstream direction. The possible values are: Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is sup…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.45ColumnvdslLineConfGinpRtxModeUsread-writecurrentG.inp(G.998.4) support setting on upstream direction. The possible values are: Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is suppo…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.46ColumnvdslLineConfGinpEtrMaxDsread-writecurrentDefines the maximum allowed value for the ETR (Effective Throughput Rate).
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.47ColumnvdslLineConfGinpEtrMaxUsread-writecurrentDefines the maximum allowed value for the ETR (Effective Throughput Rate).
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.48ColumnvdslLineConfGinpEtrMinDsread-writecurrentDefines the minimum value for the ETR (Effective Throughput Rate).
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.49ColumnvdslLineConfGinpEtrMinUsread-writecurrentDefines the minimum value for the ETR (Effective Throughput Rate).
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.50ColumnvdslLineConfGinpNdrMaxDsread-writecurrentOverrules the wanted maximum data rate provided in the SetLineTrafficConfiguration
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.51ColumnvdslLineConfGinpNdrMaxUsread-writecurrentOverrules the wanted maximum data rate provided in the SetLineTrafficConfiguration
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.52ColumnvdslLineConfGinpShineRatioDsread-writecurrentThe assumed fraction (0.001 to 0.255) of NDR necessary to correct SHINE noise.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.53ColumnvdslLineConfGinpShineRatioUsread-writecurrentThe assumed fraction (0.001 to 0.255) of NDR necessary to correct SHINE noise.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.54ColumnvdslLineConfGinpLeftrThresholdDsread-writecurrentThe rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.55ColumnvdslLineConfGinpLeftrThresholdUsread-writecurrentThe rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.56ColumnvdslLineConfGinpMaxDelayDsread-writecurrentG.inp-specific value that overrules the traffic configuration setting.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.57ColumnvdslLineConfGinpMaxDelayUsread-writecurrentG.inp-specific value that overrules the traffic configuration setting.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.58ColumnvdslLineConfGinpMinDelayDsread-writecurrentG.inp-specific value that overrules the traffic configuration setting.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.59ColumnvdslLineConfGinpMinDelayUsread-writecurrentG.inp-specific value that overrules the traffic configuration setting.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.60ColumnvdslLineConfGinpInpMinDsread-writecurrentG.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0-31
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.61ColumnvdslLineConfGinpInpMinUsread-writecurrentG.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0-31
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.62ColumnvdslLineConfGinpReinCfgInpDsread-writecurrentG.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0-7
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.63ColumnvdslLineConfGinpReinCfgInpUsread-writecurrentG.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0-7
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.64ColumnvdslLineConfGinpReinCfgFreqDsread-writecurrentG.inp-specific value that overrules the traffic configuration setting. Unit is Hz. The possible values are: 100 - 100Hz 120 - 120Hz
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.65ColumnvdslLineConfGinpReinCfgFreqUsread-writecurrentG.inp-specific value that overrules the traffic configuration setting. Unit is Hz. The possible values are: 100 - 100Hz 120 - 120Hz
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.66ColumnvdslLineConfSosMinRateB0Dsread-writecurrentThis parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The value shall be coded as an unsigned intege…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.67ColumnvdslLineConfSosMinRateB0Usread-writecurrentThis parameter specifies the minimum net data rate required for a valid SOS request in the upstream direction. The value shall be coded as an unsigned integer …
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.68ColumnvdslLineConfSosTimeDsread-writecurrentThe parameter SOS-TIME-ds is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2). If the value of this parameter is not zero, the stan…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.69ColumnvdslLineConfSosTimeUsread-writecurrentThe parameter SOS-TIME-ds is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2). If the value of this parameter is not zero, the stan…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.70ColumnvdslLineConfSosCrcDsread-writecurrentThis parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub condition of the sta…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.71ColumnvdslLineConfSosCrcUsread-writecurrentThis parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub condition of the sta…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.72ColumnvdslLineConfSosNToneDsread-writecurrentThis parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the …
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.73ColumnvdslLineConfSosNToneUsread-writecurrentThis parameter is defined as the minimum percentage of tones in the upstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the st…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.74ColumnvdslLineConfSosMaxDsread-writecurrentThis parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the downstream direction performed within a…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.75ColumnvdslLineConfSosMaxUsread-writecurrentThis parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the upstream direction performed within a 1…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.76ColumnvdslLineConfSosMultiStepDsread-writecurrentIndicates the capabilities of the VTU-R to execute the SOS request in one step or in multiple steps in the downstream direction. The field is formatted as [ggg…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.77ColumnvdslLineConfSosMultiStepUsread-writecurrentIndicates the capabilities of the VTU-R to execute the SOS request in one step or in multiple steps in the upstream direction. The field is formatted as [gggg …
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.78ColumnvdslLineConfRocEnableDsread-writecurrentEnable the robust overhead channel. disable(1), enable(2)
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.79ColumnvdslLineConfRocEnableUsread-writecurrentEnable the robust overhead channel. disable(1), enable(2)
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.80ColumnvdslLineConfRocSnrmDsread-writecurrentThe parameter is defined as the SNR margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the channel in…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.81ColumnvdslLineConfRocSnrmUsread-writecurrentThe parameter is defined as the SNR margin offset for the ROC channel in the upstream direction. The parameter is used in the specification of the channel init…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.82ColumnvdslLineConfRocMinInpDsread-writecurrentThis parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an intege…
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.83ColumnvdslLineConfRocMinInpUsread-writecurrentThis parameter contains the minimum impulse noise protection to apply on the ROC in the upstream direction. The minimum impulse noise protection is an integer …
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.84ColumnvdslLineConfSosEnableDsread-writecurrentEnable the emergency rate reduction. disable(1), enable(2)
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.85ColumnvdslLineConfSosEnableUsread-writecurrentEnable the emergency rate reduction. disable(1), enable(2)
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.86ColumnvdslLineConfDynamicDepthDsread-writecurrentEnable the dynamic change of interleave depth.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.87ColumnvdslLineConfDynamicDepthUsread-writecurrentEnable the dynamic change of interleave depth.
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.88ColumnvdslLineConfDpboParamTyperead-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.89ColumnvdslLineConfDpboParamEselMinread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.90ColumnvdslLineConfHsTxA43Psdread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.91ColumnvdslLineConfHsTxB43Psdread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.92ColumnvdslLineConfHsTxA43cB43cPsdread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.93ColumnvdslLineConfHsTxV43Carrier257Psdread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.94ColumnvdslLineConfHsTxV43Carrier383Psdread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.95ColumnvdslLineConfHsTxV43Carrier511Psdread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.2NodevdslVlan
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1TablevdslPortConfTablenot-accessiblecurrentThis table includes common attributes describing the VDSL port. This table is supported by R2.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1.1RowvdslPortConfEntrynot-accessiblecurrentAn entry in vdslPortConfTable.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1.1.1ColumnvdslPortConfPvidread-writecurrentThe PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1.1.2ColumnvdslPortConfPriorityread-writecurrentThe default ingress User Priority for this port.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1.1.3ColumnvdslPortConfAcceptableFrameTyperead-writecurrentWhen this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames …
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1.1.4ColumnvdslPortConfTlsEnableread-writecurrentEnable/disable the transparent LAN service.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1.1.5ColumnvdslPortConfTlsVidread-writecurrentThe transparent LAN service s-tag VID.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1.1.6ColumnvdslPortConfTlsPriorityread-writecurrentThe transparent LAN service s-tag priority.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1.1.7ColumnvdslPortConfDtEnableread-writecurrentEnable/disable double tag service on the specified subscriber port. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1.1.8ColumnvdslPortConfDtSvidread-writecurrentThe service provider VLAN ID. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1.1.9ColumnvdslPortConfDtSpriorityread-writecurrentThe service VLAN priority. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1.1.10ColumnvdslPortConfDtCvidread-writecurrentThe system-side customer VID. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1.1.11ColumnvdslPortConfDtCpriorityread-writecurrentThe customer VLAN priority. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.1.1.12ColumnvdslPortConfTlsPrioCopyEnableread-writecurrentEnable/disable the priority copy of TLS.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.2TablevdslPortVlanTablenot-accessiblecurrentThis table includes common attributes describing the VDSL port. This table is supported by R2.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.2.1RowvdslPortVlanEntrynot-accessiblecurrentAn entry in vdslPortVlanTable.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.2.1.1ColumnvdslPortVlanRegread-createcurrentThe port is egress or forbidden for this VLAN.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.2.1.2ColumnvdslPortVlanTagread-createcurrentThe port should transmit egress packets for this VLAN as tagged or untagged.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.2.1.3ColumnvdslPortVlanRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.3TablevdslVlanStaticTablenot-accessiblecurrentA table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and wi…
1.3.6.1.4.1.890.1.5.13.5.8.10.2.3.1RowvdslVlanStaticEntrynot-accessiblecurrentAn entry in vdslVlanStaticTable.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.3.1.1ColumnvdslVlanStaticEgressPortsread-createcurrentThe set of ports which are permanently assigned to the egress list for this VLAN by management.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.3.1.2ColumnvdslVlanStaticUntaggedPortsread-createcurrentThe set of ports which should transmit egress packets for this VLAN as untagged.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.3.1.3ColumnvdslVlanStaticRowStatusread-createcurrentThis object indicates the status of this entry.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.4TablevdslPortPvlanTablenot-accessiblecurrentThis table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.4.1RowvdslPortPvlanEntrynot-accessiblecurrentAn entry in vdslPortPvlanTable.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.4.1.1ColumnvdslPortPvlanEtyperead-onlycurrent0~0xffff.
1.3.6.1.4.1.890.1.5.13.5.8.10.2.4.1.2ColumnvdslPortPvlanVidread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.2.4.1.3ColumnvdslPortPvlanPriorityread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.2.4.1.4ColumnvdslPortPvlanRowStatusread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.3TablevdslRfiCustomTablenot-accessiblecurrentThis table includes VDSL customized RFI configuration. This table is supported by R2.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.3.1RowvdslRfiCustomEntrynot-accessiblecurrentAn entry in vdslRfiCustomTable.
1.3.6.1.4.1.890.1.5.13.5.8.10.3.1.1ColumnvdslRfiCustomIndexread-onlycurrentIndex of the table.
1.3.6.1.4.1.890.1.5.13.5.8.10.3.1.2ColumnvdslRfiCustomStartFreqread-writecurrentThe start value of the customized frequency range.
1.3.6.1.4.1.890.1.5.13.5.8.10.3.1.3ColumnvdslRfiCustomEndFreqread-writecurrentThe end value of the customized frequency range.
1.3.6.1.4.1.890.1.5.13.5.8.10.3.1.4ColumnvdslRfiCustomEnableread-writecurrentEnable or disable the customized frequency range setting.
1.3.6.1.4.1.890.1.5.13.5.8.10.3.1.5ColumnvdslRfiCustomModeread-writecurrentNotch : sent at -80 dBm in the specified frequency bands. Gap : cut the power completely in the specified frequency bands. 1: notch(1) 2: gap(2)
1.3.6.1.4.1.890.1.5.13.5.8.10.4TablevdslLineConfUpboParamTablenot-accessiblecurrentThis table includes VDSL UPBO configuration. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.4.1RowvdslLineConfUpboParamEntrynot-accessiblecurrentAn entry in vdslLineConfUpboParamTable.
1.3.6.1.4.1.890.1.5.13.5.8.10.4.1.1ColumnvdslLineConfUpboParamBandread-onlycurrentIndex of the table.
1.3.6.1.4.1.890.1.5.13.5.8.10.4.1.2ColumnvdslLineConfUpboParamAread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.4.1.3ColumnvdslLineConfUpboParamBread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.5TablevdslLineConfDpboTablenot-accessiblecurrentThis table includes VDSL DPBO configuration. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.10.5.1RowvdslLineConfDpboEntrynot-accessiblecurrentAn entry in vdslLineConfDpboTable.
1.3.6.1.4.1.890.1.5.13.5.8.10.5.1.1ColumnvdslLineConfDpboIndexread-onlycurrentIndex of the table.
1.3.6.1.4.1.890.1.5.13.5.8.10.5.1.2ColumnvdslLineConfDpboToneread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.10.5.1.3ColumnvdslLineConfDpboPsdread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.11Nodeipbpvc
1.3.6.1.4.1.890.1.5.13.5.8.11.1TableipbpvcDomainTablenot-accessiblecurrentThis table includes ipbpvc domain configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.1.1RowipbpvcDomainEntrynot-accessiblecurrentAn entry of ipbpvcDomainTable.
1.3.6.1.4.1.890.1.5.13.5.8.11.1.1.1ColumnipbpvcDomainNameread-onlycurrentName of the domain.
1.3.6.1.4.1.890.1.5.13.5.8.11.1.1.2ColumnipbpvcDomainRowStatusread-createcurrentRow status of the table.
1.3.6.1.4.1.890.1.5.13.5.8.11.2TableipbpvcDomainVlanTablenot-accessiblecurrentThis table includes ipbpvc domain VLAN configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.2.1RowipbpvcDomainVlanEntrynot-accessiblecurrentAn entry of ipbpvcDomainVlanTable.
1.3.6.1.4.1.890.1.5.13.5.8.11.2.1.1ColumnipbpvcDomainVlanIdread-onlycurrentSet VLAN to join or leave the specified domain.
1.3.6.1.4.1.890.1.5.13.5.8.11.2.1.2ColumnipbpvcDomainDhcpVlanEnableread-createcurrentEnable/disable DHCP VLAN in a domain.
1.3.6.1.4.1.890.1.5.13.5.8.11.2.1.3ColumnipbpvcDomainVlanRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.13.5.8.11.3TableipbpvcEdgeRouterTablenot-accessiblecurrentThis table includes ipbpvc edge router configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.3.1RowipbpvcEdgeRouterEntrynot-accessiblecurrentAn entry of ipbpvcEdgeRouterTable.
1.3.6.1.4.1.890.1.5.13.5.8.11.3.1.1ColumnipbpvcEdgeRouterIpread-onlycurrentIP address of the edge router.
1.3.6.1.4.1.890.1.5.13.5.8.11.3.1.2ColumnipbpvcEdgeRouterVidread-onlycurrentVLAN ID of the edge router.
1.3.6.1.4.1.890.1.5.13.5.8.11.3.1.3ColumnipbpvcEdgeRouterMaskread-onlycurrentNetmask of the edge router.
1.3.6.1.4.1.890.1.5.13.5.8.11.3.1.4ColumnipbpvcEdgeRouterRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.13.5.8.11.4TableipbpvcInterfaceTablenot-accessiblecurrentThis table includes ipbpvc interface configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.4.1RowipbpvcInterfaceEntrynot-accessiblecurrentAn entry of ipbpvcInterfaceTable.
1.3.6.1.4.1.890.1.5.13.5.8.11.4.1.1ColumnipbpvcInterfaceIpread-onlycurrentIP address of the interface.
1.3.6.1.4.1.890.1.5.13.5.8.11.4.1.2ColumnipbpvcInterfaceMaskread-onlycurrentNetmask of the interface.
1.3.6.1.4.1.890.1.5.13.5.8.11.4.1.3ColumnipbpvcInterfaceVidread-onlycurrentVLAN ID of the interface.
1.3.6.1.4.1.890.1.5.13.5.8.11.4.1.4ColumnipbpvcInterfaceIfIndexread-createcurrentIfIndex of the interface.
1.3.6.1.4.1.890.1.5.13.5.8.11.4.1.5ColumnipbpvcInterfaceVpiread-createcurrentVPI of the interface.
1.3.6.1.4.1.890.1.5.13.5.8.11.4.1.6ColumnipbpvcInterfaceVciread-createcurrentVCI of the interface.
1.3.6.1.4.1.890.1.5.13.5.8.11.4.1.7ColumnipbpvcInterfaceRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.13.5.8.11.5TableipbpvcRouteTablenot-accessiblecurrentThis table includes ipbpvc route configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.5.1RowipbpvcRouteEntrynot-accessiblecurrentAn entry of ipbpvcRouteTable.
1.3.6.1.4.1.890.1.5.13.5.8.11.5.1.1ColumnipbpvcRouteIpread-onlycurrentIP address of the route.
1.3.6.1.4.1.890.1.5.13.5.8.11.5.1.2ColumnipbpvcRouteMaskread-onlycurrentNetmask of the route.
1.3.6.1.4.1.890.1.5.13.5.8.11.5.1.3ColumnipbpvcRouteNextHopread-onlycurrentNext hop IP address of the route.
1.3.6.1.4.1.890.1.5.13.5.8.11.5.1.4ColumnipbpvcRouteMetricread-createcurrentMetric of the route.
1.3.6.1.4.1.890.1.5.13.5.8.11.5.1.5ColumnipbpvcRoutePriorityread-createcurrentPriority of the route. Note that the default value of this object is 8, which means we keep the original priority of the packet(frame).
1.3.6.1.4.1.890.1.5.13.5.8.11.5.1.6ColumnipbpvcRouteRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.13.5.8.11.6TableipbpvcTablenot-accessiblecurrentThis table includes ipbpvc configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.6.1RowipbpvcEntrynot-accessiblecurrentAn entry of ipbpvcTable.
1.3.6.1.4.1.890.1.5.13.5.8.11.6.1.1ColumnipbpvcVpiread-onlycurrentVPI of the PVC.
1.3.6.1.4.1.890.1.5.13.5.8.11.6.1.2ColumnipbpvcVciread-onlycurrentVCI of the PVC.
1.3.6.1.4.1.890.1.5.13.5.8.11.6.1.3ColumnipbpvcPvidread-onlycurrentPVID of the PVC.
1.3.6.1.4.1.890.1.5.13.5.8.11.6.1.4ColumnipbpvcEncapread-createcurrentType of the PVC.
1.3.6.1.4.1.890.1.5.13.5.8.11.6.1.5ColumnipbpvcPriorityread-createcurrentPriority of the PVC.
1.3.6.1.4.1.890.1.5.13.5.8.11.6.1.6ColumnipbpvcProfileread-createcurrentProfile of the PVC.
1.3.6.1.4.1.890.1.5.13.5.8.11.6.1.7ColumnipbpvcRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.13.5.8.11.7TableipbpvcVlanTablenot-accessiblecurrentThis table includes ipbpvc VLAN configuration. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.7.1RowipbpvcVlanEntrynot-accessiblecurrentAn entry of ipbpvcVlanTable.
1.3.6.1.4.1.890.1.5.13.5.8.11.7.1.1ColumnipbpvcVlanRegread-createcurrentThe PVC is egress or forbidden for this VLAN.
1.3.6.1.4.1.890.1.5.13.5.8.11.7.1.2ColumnipbpvcVlanTagread-createcurrentThe PVC should transmit egress packets for this VLAN as tagged or untagged.
1.3.6.1.4.1.890.1.5.13.5.8.11.7.1.3ColumnipbpvcVlanRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.11.8Nodearpproxy
1.3.6.1.4.1.890.1.5.13.5.8.11.8.1ScalararpproxyAgeread-writecurrentAging time of the ARP proxy. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.8.2NodearpproxyFlush
1.3.6.1.4.1.890.1.5.13.5.8.11.8.2.1ScalararpproxyFlushTargetread-writecurrentThe target whose ARP table to be flushed. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.8.2.2ScalararpproxyFlushOpsread-writecurrentSet the object to 1 to start flushing. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.8.2.3ScalararpproxyFlushEdgeRouterIpread-writecurrentFlush ARP table for the specified edge router. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.8.2.4ScalararpproxyFlushEdgeRouterVidread-writecurrentFlush ARP table for the specified edge router. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.8.2.5ScalararpproxyFlushInterfaceIpread-writecurrentFlush ARP table for the specified interface. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.8.2.6ScalararpproxyFlushInterfaceMaskread-writecurrentFlush ARP table for the specified interface. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.11.8.2.7ScalararpproxyFlushInterfaceVidread-writecurrentFlush ARP table for the specified interface. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.12NodevoipPort
1.3.6.1.4.1.890.1.5.13.5.8.12.1TablevoipSipLineConfTablenot-accessiblecurrentThis table includes common attributes describing the VoIP line.
1.3.6.1.4.1.890.1.5.13.5.8.12.1.1RowvoipSipLineConfEntrynot-accessiblecurrentAn entry in voipSipLineConfTable.
1.3.6.1.4.1.890.1.5.13.5.8.12.1.1.1ColumnvoipSipLineConfSipProfileread-writecurrentSIP profile name.
1.3.6.1.4.1.890.1.5.13.5.8.12.1.1.2ColumnvoipSipLineConfSipCallSvcProfileread-writecurrentSIP call service profile name.
1.3.6.1.4.1.890.1.5.13.5.8.12.1.1.3ColumnvoipSipLineConfDspProfileread-writecurrentDSP profile name.
1.3.6.1.4.1.890.1.5.13.5.8.12.1.1.4ColumnvoipSipLineConfAccountread-writecurrentAccount for SIP registration. This object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.12.1.1.5ColumnvoipSipLineConfPasswordread-writecurrentPassword for SIP registration. This object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.12.1.1.6ColumnvoipSipLineConfDataProfileread-writecurrentDSP profile name of data mode, up to 31 characters.
1.3.6.1.4.1.890.1.5.13.5.8.12.2NodevoipPortH248
1.3.6.1.4.1.890.1.5.13.5.8.12.2.1TablevoipH248LineConfTablenot-accessiblecurrentThis table includes common attributes describing the VoIP line. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.12.2.1.1RowvoipH248LineConfEntrynot-accessiblecurrentAn entry in voipH248LineConfTable.
1.3.6.1.4.1.890.1.5.13.5.8.12.2.1.1.1ColumnvoipH248LineConfMgNameread-writecurrentMG name.
1.3.6.1.4.1.890.1.5.13.5.8.12.2.1.1.2ColumnvoipH248LineConfDspProfileread-writecurrentDSP profile.
1.3.6.1.4.1.890.1.5.13.5.8.12.2.1.1.3ColumnvoipH248LineConfDataProfileread-writecurrentDSP profile name of data mode, up to 31 characters. This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.12.2.2TablevoipH248TerminationTablenot-accessiblecurrentThis table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.12.2.2.1RowvoipH248TerminationEntrynot-accessiblecurrentAn entry in voipH248TerminationTable.
1.3.6.1.4.1.890.1.5.13.5.8.12.2.2.1.1ColumnvoipH248TerminationNameread-writecurrentTermination name.
1.3.6.1.4.1.890.1.5.13.5.8.12.3TablevoipPotsImpedanceConfTablenot-accessiblecurrentThis table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.12.3.1RowvoipPotsImpedanceConfEntrynot-accessiblecurrentAn entry in voipPotsImpedanceConfTable.
1.3.6.1.4.1.890.1.5.13.5.8.12.3.1.1ColumnvoipPotsImpedanceread-writecurrentDefault impedance is from impedance of country code.
1.3.6.1.4.1.890.1.5.13.5.8.12.4TablevoipPotsGainConfTablenot-accessiblecurrentThis table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.12.4.1RowvoipPotsGainConfEntrynot-accessiblecurrentAn entry in voipPotsGainConfTable.
1.3.6.1.4.1.890.1.5.13.5.8.12.4.1.1ColumnvoipPotsTxGainread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.12.4.1.2ColumnvoipPotsRxGainread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.12.4.1.3ColumnvoipPotsDataTxGainread-writecurrentThis MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.12.4.1.4ColumnvoipPotsDataRxGainread-writecurrentThis MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.12.5TablevoipOpmodeConfTablenot-accessiblecurrentThis table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.12.5.1RowvoipOpmodeConfEntrynot-accessiblecurrentAn entry in voipOpmodeConfTable.
1.3.6.1.4.1.890.1.5.13.5.8.12.5.1.1ColumnvoipOpModeread-writecurrentConfigure operation mode to specified subscribers. Default is normal SIP server and v5sip is V5.2 access gateway.
1.3.6.1.4.1.890.1.5.13.5.8.12.6TablevoipPolarityReverseConfTablenot-accessiblecurrentThis table is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.12.6.1RowvoipPolarityReverseConfEntrynot-accessiblecurrentAn entry in voipPolarityReverseConfTable.
1.3.6.1.4.1.890.1.5.13.5.8.12.6.1.1ColumnvoipPolarityReverseread-writecurrentEnable/disable polarity reverse function. Polarity reverse is feature to reversed tip and ring after call establish and terminate.
1.3.6.1.4.1.890.1.5.13.5.8.12.7TablevoipPotsCidConfTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.12.7.1RowvoipPotsCidConfEntrynot-accessiblecurrentAn entry in voipPotsCidConfTable.
1.3.6.1.4.1.890.1.5.13.5.8.12.7.1.1ColumnvoipPotsCidASTyperead-writecurrent0: DEFVAL (use the setting of country code) 1: CID during ring 2: DTAS CID before ring 3: RPAS CID before ring 4: LR DTAS CID before ring 5: LR CID before ring…
1.3.6.1.4.1.890.1.5.13.5.8.12.7.1.2ColumnvoipPotsCidPayloadTyperead-writecurrent0: DEFVAL (use the setting of country code) 1: MDMF 2: SDMF 3: ETSI MDMF 4: ETSI SDMF 5: DTMF 6: UK MDMF 7: UK SDMF 8: Japanese MDMF
1.3.6.1.4.1.890.1.5.13.5.8.12.8TablevoipPotsLineConfTablenot-accessiblecurrentper-interface table for pots configuration
1.3.6.1.4.1.890.1.5.13.5.8.12.8.1RowvoipPotsLineConfEntrynot-accessiblecurrentAn entry in voipPotsLineConfTable.
1.3.6.1.4.1.890.1.5.13.5.8.12.8.1.1ColumnvoipPotsLineFlashDefaultread-writecurrentset positive non-zero value to configure default flash timer settings
1.3.6.1.4.1.890.1.5.13.5.8.12.8.1.2ColumnvoipPotsLineFlashMaxread-writecurrentminimum flash period in ms
1.3.6.1.4.1.890.1.5.13.5.8.12.8.1.3ColumnvoipPotsLineFlashMinread-writecurrentmaximum flash period in ms
1.3.6.1.4.1.890.1.5.13.5.8.12.8.1.4ColumnvoipPotsLineLoopread-writecurrentmaximum loop resistance value
1.3.6.1.4.1.890.1.5.13.5.8.13NodeenetPort
1.3.6.1.4.1.890.1.5.13.5.8.13.1TableenetLineConfTablenot-accessiblecurrentThe table contains ethernet line configuration.
1.3.6.1.4.1.890.1.5.13.5.8.13.1.1RowenetLineConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.1.1.1ColumnenetLineConfBandWidthIngressread-writecurrent0~99968Kbps in step of 64Kbps, 0 means no limit.
1.3.6.1.4.1.890.1.5.13.5.8.13.1.1.2ColumnenetLineConfBandWidthEgressread-writecurrent0~99968Kbps in step of 64Kbps, 0 means no limit.
1.3.6.1.4.1.890.1.5.13.5.8.13.1.1.3ColumnenetLineConfFlowCtrlEnableread-writecurrentEnable/disable flow control.
1.3.6.1.4.1.890.1.5.13.5.8.13.1.1.4ColumnenetLineConfSpeedread-writecurrentPort spd/dplx configuration.
1.3.6.1.4.1.890.1.5.13.5.8.13.1.1.5ColumnenetLineConfAutoNegoEnableread-writecurrentEnable/disable auto negotiation.
1.3.6.1.4.1.890.1.5.13.5.8.13.2TableenetPortConfTablenot-accessiblecurrentThe table contains ethernet line configuration.
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1RowenetPortConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.1ColumnenetPortConfPriorityread-writecurrentThe default ingress User Priority for this port.
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.2ColumnenetPortConfPvidread-writecurrentThe PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port.
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.3ColumnenetPortConfAcceptableFrameTyperead-writecurrentWhen this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1), untagged frames …
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.4ColumnenetPortConfTlsEnableread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.5ColumnenetPortConfTlsVidread-writecurrentThe transparent LAN VID.
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.6ColumnenetPortConfTlsPriorityread-writecurrentThe transparent LAN priority.
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.7ColumnenetPortConfRateLimitProfileread-writecurrentRate Limit Profile name. This object is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.8ColumnenetPortConfQueueRateLimitProfileread-writecurrentSet queue rate limit profile.
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.9ColumnenetPortConfDtEnableread-writecurrentEnable/disable double tag service on the specified subscriber port.
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.10ColumnenetPortConfDtSvidread-writecurrentThe service provider VLAN ID.
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.11ColumnenetPortConfDtSpriorityread-writecurrentThe service VLAN priority.
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.12ColumnenetPortConfDtCvidread-writecurrentThe system-side customer VID.
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.13ColumnenetPortConfTrunkdtEnableread-writecurrentEnable/disable trunkdt service on the specified subscriber port.
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.14ColumnenetPortConfTrunkdtVidread-writecurrentThe service provider VLAN ID.
1.3.6.1.4.1.890.1.5.13.5.8.13.2.1.15ColumnenetPortConfTrunkdtPriorityread-writecurrentThe service VLAN priority.
1.3.6.1.4.1.890.1.5.13.5.8.13.3TableenetPortVlanTablenot-accessiblecurrentThe table contains ethernet line vlan configuration.
1.3.6.1.4.1.890.1.5.13.5.8.13.3.1RowenetPortVlanEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.3.1.1ColumnenetPortVlanRegread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.3.1.2ColumnenetPortVlanTagread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.3.1.3ColumnenetPortVlanRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.13.4NodeelcDot3ad
1.3.6.1.4.1.890.1.5.13.5.8.13.4.1TableelcDot3adTablenot-accessiblecurrentThe table contains dot3ad configuration. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.13.4.1.1RowelcDot3adEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.4.1.1.1ColumnelcDot3adSlotIdread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.4.1.1.2ColumnelcDot3adGroupIdread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.4.1.1.3ColumnelcDot3adEnableread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.4.2TableelcAggPortTablenot-accessiblecurrentThe table contains port aggregation configuration. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.13.4.2.1RowelcAggPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.4.2.1.1ColumnelcAggPortJoinread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.5NodeenetQoS
1.3.6.1.4.1.890.1.5.13.5.8.13.5.1TableenetQScheduleTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.5.1.1RowenetQScheduleEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.5.1.1.1ColumnenetQScheduleTyperead-writecurrentQueue scheduling type (strictly priority queue or weighted round robin).
1.3.6.1.4.1.890.1.5.13.5.8.13.5.2TableenetQueueWeightTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.5.2.1RowenetQueueWeightEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.5.2.1.1ColumnenetQueueWeightread-writecurrentWeight for the priority queue, 0 means strict priority
1.3.6.1.4.1.890.1.5.13.5.8.13.6TableenetPortPvlanTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.6.1RowenetPortPvlanEntrynot-accessiblecurrentAn entry in enetPortPvlanTable.
1.3.6.1.4.1.890.1.5.13.5.8.13.6.1.1ColumnenetPortPvlanEtyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.6.1.2ColumnenetPortPvlanVidread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.6.1.3ColumnenetPortPvlanPriorityread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.6.1.4ColumnenetPortPvlanRowStatusread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.7TableenetPortXvlanTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.7.1RowenetPortXvlanEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.13.7.1.1ColumnenetPortXvlanCvidread-onlycurrentthe original vlan id in the 8021q tag, 1~4094
1.3.6.1.4.1.890.1.5.13.5.8.13.7.1.2ColumnenetPortXvlanSvidread-onlycurrentthe result vlan id in the 8021q tag, or in the QinQ S-tag, 1~4094
1.3.6.1.4.1.890.1.5.13.5.8.13.7.1.3ColumnenetPortXvlanRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.14TablegbondGroupTablenot-accessiblecurrentThe table contains bonding group configuration. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.14.1RowgbondGroupEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.14.1.1ColumngbondGroupNameread-onlycurrentAn administratively assigned string, which may be used to identify bonding group.
1.3.6.1.4.1.890.1.5.13.5.8.14.1.2ColumngbondGroupPortsread-createcurrentThe set of ports which are currently assigned to the bonding group of specified group name. Each bit in the octet specifies a port from MSB to LSB. For example…
1.3.6.1.4.1.890.1.5.13.5.8.14.1.3ColumngbondGroupRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.15Nodedtpvc
1.3.6.1.4.1.890.1.5.13.5.8.15.1TabledtpvcTablenot-accessiblecurrentThis table includes Double Tagging PVC configuration. This table is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.15.1.1RowdtpvcEntrynot-accessiblecurrentAn entry of dtpvcTable.
1.3.6.1.4.1.890.1.5.13.5.8.15.1.1.1ColumndtpvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.15.1.1.2ColumndtpvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.15.1.1.3ColumndtpvcSvidread-onlycurrents-tag of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.15.1.1.4ColumndtpvcCvidread-onlycurrentc-tag of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.15.1.1.5ColumndtpvcEncapread-createcurrentEncapsulation of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.15.1.1.6ColumndtpvcSPriorityread-createcurrents-priority of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.15.1.1.7ColumndtpvcCPriorityread-createcurrentc-priority of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.15.1.1.8ColumndtpvcProfileread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc.
1.3.6.1.4.1.890.1.5.13.5.8.15.1.1.9ColumndtpvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.15.1.1.10ColumndtpvcMvlanEnableread-createcurrentEnable/disable multicast VLAN function for the DTPVC.
1.3.6.1.4.1.890.1.5.13.5.8.16Nodee1Port
1.3.6.1.4.1.890.1.5.13.5.8.16.1Tablee1PortConfTablenot-accessiblecurrentThis table is supported by R5.03 and later versions. The table contains E1 line configuration.
1.3.6.1.4.1.890.1.5.13.5.8.16.1.1Rowe1PortConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.16.1.1.1Columne1PortConfAdminStatusread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.16.1.1.2Columne1PortConfAlarmProfileread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.16.1.1.3Columne1PortConfImpedanceread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.16.1.1.4Columne1PortConfTimingSrcread-writecurrent0: local, 1~8 E1 port: the timing source port id
1.3.6.1.4.1.890.1.5.13.5.8.17Nodexvlan
1.3.6.1.4.1.890.1.5.13.5.8.17.1TablexvlanTablenot-accessiblecurrentThis table is supported by R5.04 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.17.1.1RowxvlanEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.17.1.1.1ColumnxvlanCvidread-onlycurrentthe original vlan id in the 8021q tag, 1~4094
1.3.6.1.4.1.890.1.5.13.5.8.17.1.1.2ColumnxvlanSvidread-onlycurrentthe result vlan id in the 8021q tag, or in the QinQ S-tag, 1~4094
1.3.6.1.4.1.890.1.5.13.5.8.17.1.1.3ColumnxvlanCvidsread-onlycurrentthe result vlan id in the QinQ C-tag, 0~4094, 0 means single tag
1.3.6.1.4.1.890.1.5.13.5.8.17.1.1.4ColumnxvlanRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.18Nodevdsl2Port
1.3.6.1.4.1.890.1.5.13.5.8.18.1Tablevdsl2LineConfTablenot-accessiblecurrentThis table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.18.1.1Rowvdsl2LineConfEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.18.1.1.1Columnvdsl2LineConfRateLimitProfileread-writecurrentSet rate limit profile
1.3.6.1.4.1.890.1.5.13.5.8.18.1.1.2Columnvdsl2LineConfQueueRateLimitProfileread-writecurrentSet queue rate limit profile
1.3.6.1.4.1.890.1.5.13.5.8.18.2Nodevdsl2Pvc
1.3.6.1.4.1.890.1.5.13.5.8.18.2.1Tablevdsl2PvcTablenot-accessiblecurrentThis table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.18.2.1.1Rowvdsl2PvcEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.18.2.1.1.1Columnvdsl2PvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.18.2.1.1.2Columnvdsl2PvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.18.2.1.1.3Columnvdsl2PvcPvidread-onlycurrentDefault VID of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.18.2.1.1.4Columnvdsl2PvcEncapread-writecurrentEncapsulation of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.18.2.1.1.5Columnvdsl2PvcPriorityread-writecurrent802.1p default priority of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.18.2.1.1.6Columnvdsl2PvcSuperread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.8.18.2.1.1.7Columnvdsl2PvcRowStatusread-writecurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.18.3Nodevdsl2QSchedule
1.3.6.1.4.1.890.1.5.13.5.8.18.3.1Tablevdsl2QScheduleTablenot-accessiblecurrentThe table contains queue schedule configuration for the vdsl2 ports.
1.3.6.1.4.1.890.1.5.13.5.8.18.3.1.1Rowvdsl2QScheduleEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.18.3.1.1.1Columnvdsl2QScheduleTyperead-writecurrentQueue scheduling type (strictly priority queue or weighted round robin).
1.3.6.1.4.1.890.1.5.13.5.8.18.3.2Tablevdsl2QueueWeightTablenot-accessiblecurrentThe table contains weight configuration for the priority queues.
1.3.6.1.4.1.890.1.5.13.5.8.18.3.2.1Rowvdsl2QueueWeightEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.18.3.2.1.1Columnvdsl2QueueWeightread-writecurrentWeight for the priority queue, 0 means strict priority
1.3.6.1.4.1.890.1.5.13.5.8.18.4Nodevdsl2Paepvc
1.3.6.1.4.1.890.1.5.13.5.8.18.4.1Tablevdsl2PaepvcTablenot-accessiblecurrentThis table includes PPPoAoE PVC configuration. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.8.18.4.1.1Rowvdsl2PaepvcEntrynot-accessiblecurrentAn entry of vdsl2PaepvcTable.
1.3.6.1.4.1.890.1.5.13.5.8.18.4.1.1.1Columnvdsl2PaepvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.18.4.1.1.2Columnvdsl2PaepvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.18.4.1.1.3Columnvdsl2PaepvcPvidread-onlycurrentDefault VID of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.18.4.1.1.4Columnvdsl2PaepvcEncapread-createcurrentEncapsulation of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.18.4.1.1.5Columnvdsl2PaepvcPriorityread-createcurrent802.1p default priority of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.18.4.1.1.6Columnvdsl2PaepvcAcNameread-createcurrentAccess concentrator name.
1.3.6.1.4.1.890.1.5.13.5.8.18.4.1.1.7Columnvdsl2PaepvcServiceNameread-createcurrentService name.
1.3.6.1.4.1.890.1.5.13.5.8.18.4.1.1.8Columnvdsl2PaepvcHelloTimeread-createcurrentThe system will close the PVC if there are not any LCP echo messages passed through during the LCP hello time.
1.3.6.1.4.1.890.1.5.13.5.8.18.4.1.1.9Columnvdsl2PaepvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.8.19NodepvcAll
1.3.6.1.4.1.890.1.5.13.5.8.19.1ScalarpvcAllFilterread-writecurrentIfindex to filter pvc, value 0 indicates to display all.
1.3.6.1.4.1.890.1.5.13.5.8.19.2TablepvcAllTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.19.2.1RowpvcAllEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.8.19.2.1.1ColumnpvcAllVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.19.2.1.2ColumnpvcAllVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.19.2.1.3ColumnpvcAllEncapread-onlycurrentEncapsulation of the pvc.
1.3.6.1.4.1.890.1.5.13.5.8.19.2.1.4ColumnpvcAllTyperead-onlycurrentType of the pvc.
1.3.6.1.4.1.890.1.5.13.5.9Nodeprofile
1.3.6.1.4.1.890.1.5.13.5.9.1NodeadslProfile
1.3.6.1.4.1.890.1.5.13.5.9.1.1ScalarmaxNumOfAdslLineProfilesread-onlycurrentThe maximum number of ADSL line profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.1.2ScalarmaxNumOfAdslAlarmProfilesread-onlycurrentThe maximum number of ADSL alarm profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.2NodeshdslProfile
1.3.6.1.4.1.890.1.5.13.5.9.2.1ScalarmaxNumOfShdslLineProfilesread-onlycurrentThe maximum number of SHDSL line profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.2.2ScalarmaxNumOfShdslAlarmProfilesread-onlycurrentThe maximum number of SHDSL alarm profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.3NodeatmProfile
1.3.6.1.4.1.890.1.5.13.5.9.3.1ScalarmaxNumOfAtmProfilesread-onlycurrentThe maximum number of ATM profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.3.2TableatmProfileTablenot-accessiblecurrentThis table contains information on the PVC configuration. One entry in this table reflects a profile which can be used to configure the PVC.
1.3.6.1.4.1.890.1.5.13.5.9.3.2.1RowatmProfileEntrynot-accessiblecurrentAn entry in atmProfileTable.
1.3.6.1.4.1.890.1.5.13.5.9.3.2.1.1ColumnatmProfileNameread-onlycurrentThis object is used by the ATM profile table in order to identify a row of this table.
1.3.6.1.4.1.890.1.5.13.5.9.3.2.1.2ColumnatmProfileAALread-createcurrentATM Adaptation Layer policy.
1.3.6.1.4.1.890.1.5.13.5.9.3.2.1.3ColumnatmProfileClassread-createcurrentATM traffic class, including constant bit rate, real-time variable bit rate, non real-time variable bit rate, unspecified bit rate, and available bit rate.
1.3.6.1.4.1.890.1.5.13.5.9.3.2.1.4ColumnatmProfilePcrread-createcurrentPeak Cell Rate.
1.3.6.1.4.1.890.1.5.13.5.9.3.2.1.5ColumnatmProfileCdvtread-createcurrentCell Delay Variation Tolerance.
1.3.6.1.4.1.890.1.5.13.5.9.3.2.1.6ColumnatmProfileScrMcrread-createcurrentSustain Cell Rate for vbr or Minimum Cell Rate for abr.
1.3.6.1.4.1.890.1.5.13.5.9.3.2.1.7ColumnatmProfileBtread-createcurrentBurst Tolerance for vbr.
1.3.6.1.4.1.890.1.5.13.5.9.3.2.1.8ColumnatmProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.9.4Nodeprofsvr
1.3.6.1.4.1.890.1.5.13.5.9.4.1ScalarprofileServerModeread-writecurrentThe object indicates the system is running profile server with server mode or client mode.
1.3.6.1.4.1.890.1.5.13.5.9.4.2ScalarprofileServerIpread-writecurrentIP address of the profile server.
1.3.6.1.4.1.890.1.5.13.5.9.4.3TableprofsvrClientTablenot-accessiblecurrentThis table includes the clients to be provisioned.
1.3.6.1.4.1.890.1.5.13.5.9.4.3.1RowprofsvrClientEntrynot-accessiblecurrentAn entry of profsvrClientTable.
1.3.6.1.4.1.890.1.5.13.5.9.4.3.1.1ColumnprofsvrClientIpread-onlycurrentIP address of the client to be provisioned.
1.3.6.1.4.1.890.1.5.13.5.9.4.3.1.2ColumnprofsvrClientTyperead-createcurrentProvision type to decide whether deleting unmapped profiles in client or not.
1.3.6.1.4.1.890.1.5.13.5.9.4.3.1.3ColumnprofsvrClientRowStatusread-createcurrentThe row status is used to create or delete a client.
1.3.6.1.4.1.890.1.5.13.5.9.4.4ScalarprofileServerSyncread-writecurrentThe manager sets the object to be one to start profile synchronization. The agent should clear the object to be zero when the operation is completed.
1.3.6.1.4.1.890.1.5.13.5.9.5NodeaclProfile
1.3.6.1.4.1.890.1.5.13.5.9.5.1TableaclProfileTablenot-accessiblecurrentThis table is supported by R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1RowaclProfileEntrynot-accessiblecurrentAn entry of aclProfileTable.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.1ColumnaclProfileRuleNameread-onlycurrentProfile rule name
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.2ColumnaclProfileRuleNumberread-createcurrentThe managed object is for acl profile rule configuration. etype <etype> vlan <vid> (1), etype <etype> smac <mac> (2), etype <etype> dmac <mac> (3), vlan <vid> …
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.3ColumnaclProfileActionNumberread-createcurrentProfile action number. Bit 1: rate Bit 2: rvlan Bit 3: rpri Bit 4: deny Bit 1, Bit 2 & Bit 3 can multiple selection.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.4ColumnaclProfileRuleParamMaskread-createcurrentProfile rule parameter mask. BIT 1: srcip <ip>/<mask> BIT 2: dstip <ip>/<mask> BIT 3: tos <stos> <etos> BIT 4: srcport <sport> <eport> BIT 5: dstport <sport> <…
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.5ColumnaclProfileRuleEtyperead-createcurrentProfile rule etype.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.6ColumnaclProfileRuleVidread-createcurrentProfile rule vid.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.7ColumnaclProfileRuleSmacread-createcurrentProfile rule source MAC.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.8ColumnaclProfileRuleDmacread-createcurrentProfile rule destination MAC.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.9ColumnaclProfileRulePriorityread-createcurrentProfile rule priority.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.10ColumnaclProfileRuleProtocolread-createcurrentProfile rule protocol. icmp(1),igmp(2),ip(4),tcp(6),udp(17),gre(47),ospf(89), and other protocol types.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.11ColumnaclProfileRuleSrcIPread-createcurrentProfile rule source IP
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.12ColumnaclProfileRuleSrcIPMaskread-createcurrentThe subnet mask of source IP mask.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.13ColumnaclProfileRuleDestIPread-createcurrentProfile rule source IP.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.14ColumnaclProfileRuleDestIPMaskread-createcurrentThe subnet mask of destination IP mask.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.15ColumnaclProfileRuleStartTosread-createcurrentProfile rule start type of service.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.16ColumnaclProfileRuleEndTosread-createcurrentProfile rule end type of service.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.17ColumnaclProfileRuleSrcStartPortread-createcurrentProfile rule source start port.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.18ColumnaclProfileRuleSrcEndPortread-createcurrentProfile rule source end port.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.19ColumnaclProfileRuleDestStartPortread-createcurrentProfile rule destination start port.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.20ColumnaclProfileRuleDestEndPortread-createcurrentProfile rule destination end port.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.21ColumnaclProfileActionRateread-createcurrentProfile action to replace to this rate.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.22ColumnaclProfileActionrvlanread-createcurrentProfile action to replace to this vlan.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.23ColumnaclProfileActionrpriread-createcurrentProfile action to replace to this priority.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.24ColumnaclProfileRowStatusread-createcurrentThe row status of the entry.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.25ColumnaclProfileRuleSipread-createcurrentSource IP.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.26ColumnaclProfileRuleDipread-createcurrentDestination IP.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.27ColumnaclProfileRuleSportread-createcurrentSource port.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.28ColumnaclProfileRuleDportread-createcurrentDestination port.
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.29ColumnaclProfileRuleSrcIp6read-createcurrentsrcip <ip6> for RuleNumber (21).
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.30ColumnaclProfileRuleDstIp6read-createcurrentdstip <ip6> for RuleNumber (21).
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.31ColumnaclProfileRuleSip6read-createcurrentsip <ip6> for RuleNumber (19), (22).
1.3.6.1.4.1.890.1.5.13.5.9.5.1.1.32ColumnaclProfileRuleDip6read-createcurrentdip <ip6> for RuleNumber (20), (23).
1.3.6.1.4.1.890.1.5.13.5.9.6NodevdslProfile
1.3.6.1.4.1.890.1.5.13.5.9.6.1ScalarmaxNumOfVdslLineProfilesread-onlycurrentThe maximum number of VDSL line profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.6.2ScalarmaxNumOfVdslAlarmProfilesread-onlycurrentThe maximum number of VDSL alarm profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.6.3TablevdslLineConfProfileExtendedTablenot-accessiblecurrentThis table contains information on the VDSL line profile extension configuration. This table is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.6.3.1RowvdslLineConfProfileExtendedEntrynot-accessiblecurrentAn entry in vdslLineConfProfileExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.1Columnvdsl2LConfProfRaModeDsread-writecurrent(RA-MODEds). The mode of operation of a rate-adaptive xTU-C in the transmit direction. The parameter can take three values: manual(1), raInit(2), dynamicRa(3).
1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.2Columnvdsl2LConfProfRaModeUsread-writecurrent(RA-MODEus). The mode of operation of a rate-adaptive xTU-R in the transmit direction. The parameter can take three values: manual(1), raInit(2), dynamicRa(3).
1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.3Columnvdsl2LConfProfRaUsNrmDsread-writecurrent(RA-USNRMds). The Downstream Up-Shift Noise Margin value, to be used when xdsl2LConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is above t…
1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.4Columnvdsl2LConfProfRaUsNrmUsread-writecurrent(RA-USNRMus). The Upstream Up-Shift Noise Margin value, to be used when xdsl2LConfProfRaModeUs is set to dynamicRa. If the upstream noise margin is above this …
1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.5Columnvdsl2LConfProfRaDsNrmDsread-writecurrent(RA-DSNRMds). The Downstream Down-Shift Noise Margin value, to be used when xdsl2LConfProfRaModeDs is set to dynamicRa. If the downstream noise margin is below…
1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.6Columnvdsl2LConfProfRaDsNrmUsread-writecurrent(RA-DSNRMus). The Upstream Downshift Noise Margin value, to be used when xdsl2LConfProfRaModeUs is set to dynamicRa. If the upstream noise margin is below this…
1.3.6.1.4.1.890.1.5.13.5.9.6.3.1.7Columnvdsl2LConfProfProfileNameread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.9.6.4TablevdslLineAlarmConfProfileExtendedTablenot-accessiblecurrentThis table contains information on the VDSL line alarm profile extension configuration. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.6.4.1RowvdslLineAlarmConfProfileExtendedEntrynot-accessiblecurrentAn entry in vdslLineAlarmConfProfileExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.9.6.4.1.1ColumnvdslLAlarmConfProfProfileNameread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.9.7NodevoipProfile
1.3.6.1.4.1.890.1.5.13.5.9.7.1NodesipProfile
1.3.6.1.4.1.890.1.5.13.5.9.7.1.1ScalarmaxNumOfSipProfilesread-onlycurrentThe maximum number of SIP profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2TablesipProfileTablenot-accessiblecurrentThis table includes SIP protocol related configuration. This table is supported by R4.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1RowsipProfileEntrynot-accessiblecurrentAn entry in sipProfileTable.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.1ColumnsipProfileNameread-onlycurrentThis object is used by the SIP profile table in order to identify a row of this table.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.2ColumnsipProfileSipSvrread-createcurrentIP used for SIP registration or SIP domain name.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.3ColumnsipProfileRegSvrread-createcurrentRegistration server IP or registration server domain name.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.4ColumnsipProfileProxySvrread-createcurrentProxy server IP or proxy server doamin name.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.5ColumnsipProfileSipPortread-createcurrentSIP UA port number.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.6ColumnsipProfileRegSvrPortread-createcurrentRegistration server port number.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.7ColumnsipProfileProxySvrPortread-createcurrentProxy server port number.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.8ColumnsipProfileUriTyperead-createcurrent
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.9ColumnsipProfilePbitread-createcurrent802.1p bit for SIP and RTP packet.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.10ColumnsipProfileDscpread-createcurrentDSCP for SIP and RTP packet.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.11ColumnsipProfileKeepAliveread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.12ColumnsipProfileSeread-createcurrentSession expiration time in seconds.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.13ColumnsipProfilePrackread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.14ColumnsipProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.15ColumnsipProfileReSendread-createcurrentresend factor of session expiration time. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.16ColumnsipProfileNonceCountKeepread-createcurrentThis MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.17ColumnsipProfileQopQuoteread-createcurrentThis MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.18ColumnsipProfileRefertobracketread-createcurrentThis MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.19ColumnsipProfileRefertodotread-createcurrentThis MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.20ColumnsipProfileRtpStartPortread-createcurrentstart of RTP port number. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.2.1.21ColumnsipProfileRtpEndPortread-createcurrentend of RTP port number. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.3ScalarmaxNumOfSipCallSvcProfilesread-onlycurrentThe maximum number of SIP call service profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4TablesipCallSvcProfileTablenot-accessiblecurrentThis table includes SIP call service related configuration. This table is supported by R4.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1RowsipCallSvcProfileEntrynot-accessiblecurrentAn entry in sipCallSvcProfileTable.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.1ColumnsipCallSvcProfileNameread-onlycurrentThis object is used by the SIP call service profile table in order to identify a row of this table.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.2ColumnsipCallSvcProfilePasswdOnread-createcurrentPassword is necessary or not for SIP registration.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.3ColumnsipCallSvcProfilePasswdread-createcurrentSIP registration password.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.4ColumnsipCallSvcProfileNumberPlanOnread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.5ColumnsipCallSvcProfileNumberPlanCcread-createcurrentCountry code, only digit 0..9 are allowed.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.6ColumnsipCallSvcProfileNumberPlanNdcread-createcurrentNational destination code, only digit 0..9 are allowed.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.7ColumnsipCallSvcProfileNumberPlanTableread-createcurrentNumbering plan table name.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.8ColumnsipCallSvcProfileStateMaskread-createcurrentBit 1 reserved : reserved Bit 2 callhold : call hold Bit 3 callwait : call waiting Bit 4 callreturn : call return Bit 5 calltransfer : call transfer Bit 6 clip…
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.9ColumnsipCallSvcProfileDtmfread-createcurrentdtmf bypass : bypass DTMF tone dtmf rfc2833 : DTMF tone relay according to RFC2833 dtmf rfc2833like : DTMF tone relay by SIP INFO message, but RFC2833 payload …
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.10ColumnsipCallSvcProfileFaxread-createcurrentfax g711 : FAX service pass through by ITU-T G.711 fax t38 : FAX service by ITU-T T.38 UDP fax t38rtp : FAX service by ITU-T T.38 RTP
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.11ColumnsipCallSvcProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.12ColumnsipCallSvcProfileKeypatternread-createcurrentKey pattern table name. This object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.13ColumnsipCallSvcProfileRegTimeread-createcurrentRegistration expiration time in seconds.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.14ColumnsipCallSvcProfileFlashread-createcurrentflash invite : send SIP INVITE message flash rfc2833 : flash relay according to RFC2833 flash rfc2833like : flash relay by SIP INFO message, but RFC2833 payloa…
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.15ColumnsipCallSvcProfileFlashPatternread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.16ColumnsipCallSvcProfileReanswerTimeread-createcurrentReanswer time. The time period after user hangs up and before call is disconnected.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.17ColumnsipCallSvcProfileFirstDigitread-createcurrentfirst digit timeout. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.4.1.18ColumnsipCallSvcProfileInterdigitread-createcurrentinter digit timeout. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.5TablesipCallSvcProfileLocalHelpTablenot-accessiblecurrentThis table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.5.1RowsipCallSvcProfileLocalHelpEntrynot-accessiblecurrentAn entry in sipCallSvcProfileLocalHelpTable.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.5.1.1ColumnsipCallSvcProfileLocalHelpIndexread-onlycurrentIndex number.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.5.1.2ColumnsipCallSvcProfileLocalHelpTableNameread-writecurrentLocal help table name.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.5.1.3ColumnsipCallSvcProfileLocalHelpTableTelread-writecurrentLocal help telephone number. Only digit characters are allowed. Note that sipCallSvcProfileLocalHelpTableName and sipCallSvcProfileLocalHelpTableTel must be se…
1.3.6.1.4.1.890.1.5.13.5.9.7.1.6ScalarmaxNumOfSipDialPlanProfilesread-onlycurrentThe maximum number of SIP dial plan profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.7TablesipDialPlanProfileTablenot-accessiblecurrentConfigure dial plan related configuration of specified profile. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.7.1RowsipDialPlanProfileEntrynot-accessiblecurrentAn entry in sipDialPlanProfileTable.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.7.1.1ColumnsipDialPlanProfileNameread-onlycurrentProfile name.
1.3.6.1.4.1.890.1.5.13.5.9.7.1.7.1.2ColumnsipDialPlanProfileIndexread-onlycurrentIndex number. 1-32 means dialplan pattern, 255 means default SIP server profile name
1.3.6.1.4.1.890.1.5.13.5.9.7.1.7.1.3ColumnsipDialPlanProfileDialPlanTableNameread-writecurrentDial plan table name. 1-32 means dialplan pattern, 255 means default SIP server profile name
1.3.6.1.4.1.890.1.5.13.5.9.7.1.7.1.4ColumnsipDialPlanProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.13.5.9.7.2ScalarmaxNumOfDspProfilesread-onlycurrentThe maximum number of DSP profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.7.3TabledspProfileTablenot-accessiblecurrentThis table includes DSP related configuration. This table is supported by R4.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1RowdspProfileEntrynot-accessiblecurrentAn entry in dspProfileTable.
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.1ColumndspProfileNameread-onlycurrentThis object is used by the DSP profile table in order to identify a row of this table.
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.2ColumndspProfileCodecread-createcurrentBit 1: g711a Bit 2: g711mu Bit 3: g723 Bit 4: g726-16 Bit 5: g726-24 Bit 6: g726-32 Bit 7: g726-40 Bit 8: g729ab
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.3ColumndspProfilePlayBufferMinDelayread-createcurrentPlay buffer minimum delay in milliseconds. It should be less than or equal to dspProfilePlayBufferMaxDelay.
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.4ColumndspProfilePlayBufferMaxDelayread-createcurrentPlay buffer maximum delay in milliseconds. It should be greater than or equal to dspProfilePlayBufferMinDelay.
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.5ColumndspProfileEchoTailread-createcurrentEcho cancellation echo tail period in milliseconds.
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.6ColumndspProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.7ColumndspProfileEchocancelOnread-createcurrentEcho cancellation.
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.8ColumndspProfileVadOnread-createcurrentvoice activity detection.
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.9ColumndspProfileg711vpiread-createcurrentG.711 voice packet interval time in milliseconds.
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.10ColumndspProfileg723vpiread-createcurrentG.723 voice packet interval time in milliseconds.
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.11ColumndspProfileg726vpiread-createcurrentG.726 voice packet interval time in milliseconds.
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.12ColumndspProfileg729vpiread-createcurrentG.729 voice packet interval time in milliseconds.
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.13ColumndspProfilePbitread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.14ColumndspProfileDscpread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.9.7.3.1.15ColumndspProfileCodecPriorityread-createcurrentevery octet mean a codec, the order of octets means codec priority. 0x1: g711a 0x2: g711mu 0x3: g723 0x4: g726-16 0x5: g726-24 0x6: g726-32 0x7: g726-40 0x8: g…
1.3.6.1.4.1.890.1.5.13.5.9.7.4Nodeh248Profile
1.3.6.1.4.1.890.1.5.13.5.9.7.4.1ScalarmaxNumOfH248Profilesread-onlycurrentThe maximum number of H.248 profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2Tableh248ProfileTablenot-accessiblecurrentThis table includes H.248 protocol related configuration. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1Rowh248ProfileEntrynot-accessiblecurrentAn entry in h248ProfileTable.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.1Columnh248ProfileNameread-onlycurrentThis object is used by the H.248 profile table in order to identify a row of this table.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.2Columnh248ProfileMgcread-createcurrentMGC IP or domain name.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.3Columnh248ProfileMgcPortread-createcurrentMGC port number.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.4Columnh248ProfileMgc2Onread-createcurrentSecondary MGC on/off.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.5Columnh248ProfileMgc2read-createcurrentSecondary MGC IP or domain name.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.6Columnh248ProfileMgc2Portread-createcurrentSecondary MGC port.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.7Columnh248ProfileTransportread-createcurrentTransport protocol.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.8Columnh248ProfileEncoderead-createcurrentH.248 coding type.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.9Columnh248ProfilePbitread-createcurrent802.1p bit for H.248 and RTP packet.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.10Columnh248ProfileDscpread-createcurrentDSCP for H.248 and RTP packet.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.11Columnh248ProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.12Columnh248ProfileSoftswitchread-createcurrentThis MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.13Columnh248ProfileInactivityTimerread-createcurrentThis MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.14Columnh248ProfilePrefixNameread-createcurrentephemeral termination prefix, up to 31 characters. This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.15Columnh248ProfileRtpPortStartread-createcurrentstart port of RTP 4000 ~ 64000 This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.16Columnh248ProfileRtpPortEndread-createcurrentend port of RTP 5000 ~ 65000 This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.17Columnh248ProfileInitRetranTimeread-createcurrentinit retransmit time 100 ~ 20000 ms This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.18Columnh248ProfileMinRetranTimeread-createcurrentmin retransmit time 100 ~ 1000 ms This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.19Columnh248ProfileMaxRetranTimeread-createcurrentmax retransmit time 1000 ~ 20000 ms This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.20Columnh248ProfileRetranWindowread-createcurrentretransmit window 1000 ~ 60000 ms This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.21Columnh248ProfileStartTimeoutread-createcurrentstart timeout 0 ~ 99 seconds This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.22Columnh248ProfileShortTimeoutread-createcurrentshort timeout 1 ~ 99 seconds This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.23Columnh248ProfileLongTimeoutread-createcurrentlong timeout 1 ~ 99 seconds This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.24Columnh248ProfileVBDread-createcurrentVBD mode support enable/disable This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.25Columnh248ProfileSuffixStartNumread-createcurrentsuffix start number 1 ~ 15. This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.26Columnh248ProfileSuffixSuffixLenread-createcurrentsuffix length 0 ~ 15 This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.27Columnh248ProfileRFC2833read-createcurrentrfc2833 mode support enable/disable This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.28Columnh248ProfileRFC2833PTread-createcurrentrfc2833 payload type 96~127 This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.29Columnh248ProfileT38read-createcurrentfax t.38 mode support enable/disable This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.30Columnh248ProfileForceVersionread-createcurrentforce using h.248 version 1 This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.31Columnh248ProfileLocalcallread-writecurrentTurn on the localcall utility This MIB object is supported by R5.08 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.7.4.2.1.32Columnh248ProfileCallthroughread-writecurrentTurn on the callthrough utility This MIB object is supported by R5.08 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.8NodeipqosProfile
1.3.6.1.4.1.890.1.5.13.5.9.8.1ScalarmaxNumOfIpqosProfilesread-onlycurrentThe maximum number of IPQOS profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.8.2TableipqosProfileTablenot-accessiblecurrentThis table includes IPQOS related configuration.
1.3.6.1.4.1.890.1.5.13.5.9.8.2.1RowipqosProfileEntrynot-accessiblecurrentAn entry in ipqosProfileTable.
1.3.6.1.4.1.890.1.5.13.5.9.8.2.1.1ColumnipqosProfileNameread-onlycurrentThis object is used by the IPQOS profile table in order to identify a row of this table.
1.3.6.1.4.1.890.1.5.13.5.9.8.2.1.2ColumnipqosProfileNumOfQueueread-onlycurrentThe number of IPQOS queues.
1.3.6.1.4.1.890.1.5.13.5.9.8.2.1.3ColumnipqosProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.13.5.9.8.3TableipqosProfileQueueTablenot-accessiblecurrentThis table includes IPQOS queue related configuration.
1.3.6.1.4.1.890.1.5.13.5.9.8.3.1RowipqosProfileQueueEntrynot-accessiblecurrentAn entry in ipqosProfileQueueTable.
1.3.6.1.4.1.890.1.5.13.5.9.8.3.1.1ColumnipqosProfileQueueIndexread-onlycurrentIPQOS queue index.
1.3.6.1.4.1.890.1.5.13.5.9.8.3.1.2ColumnipqosProfileQueuePIRread-writecurrentPeak rate.
1.3.6.1.4.1.890.1.5.13.5.9.8.3.1.3ColumnipqosProfileQueueCIRread-writecurrentCommited rate.
1.3.6.1.4.1.890.1.5.13.5.9.8.3.1.4ColumnipqosProfileQueuePBSread-writecurrentPeak burst size.
1.3.6.1.4.1.890.1.5.13.5.9.8.3.1.5ColumnipqosProfileQueueCBSread-writecurrentCommited burst size.
1.3.6.1.4.1.890.1.5.13.5.9.8.3.1.6ColumnipqosProfileQueueLevelread-writecurrentQueue level.
1.3.6.1.4.1.890.1.5.13.5.9.8.3.1.7ColumnipqosProfileQueueWeightread-writecurrentQueue weight.
1.3.6.1.4.1.890.1.5.13.5.9.9NoderateLimitProfile
1.3.6.1.4.1.890.1.5.13.5.9.9.1ScalarmaxNumOfRateLimitProfilesread-onlycurrentThe maximum number of Rate Limit profiles supported by the system. This object is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.9.2TablerateLimitProfileTablenot-accessiblecurrentThis table includes Rate Limit related configuration. This table is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.9.2.1RowrateLimitProfileEntrynot-accessiblecurrentAn entry in rateLimitProfileTable.
1.3.6.1.4.1.890.1.5.13.5.9.9.2.1.1ColumnrateLimitProfileNameread-onlycurrentThis object is used by the Rate Limit profile table in order to identify a row of this table.
1.3.6.1.4.1.890.1.5.13.5.9.9.2.1.2ColumnrateLimitProfileIngressRateread-writecurrentIngress rate between 0~100032 in kbps in step of 64, '0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.9.2.1.3ColumnrateLimitProfileEgressRateread-writecurrentEgress rate between 0~100032 in kbps in step of 64, '0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.9.2.1.4ColumnrateLimitProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.13.5.9.10Nodee1AlarmProfile
1.3.6.1.4.1.890.1.5.13.5.9.10.1ScalarmaxNumOfE1AlarmProfileread-onlycurrentThe maximum number of E1 Alarm profiles supported by the system. This object is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.10.2Tablee1AlarmProfileTablenot-accessiblecurrentThis table includes Rate Limit related configuration. This table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.10.2.1Rowe1AlarmProfileEntrynot-accessiblecurrentAn entry in e1AlarmProfileTable.
1.3.6.1.4.1.890.1.5.13.5.9.10.2.1.1Columne1AlarmProfileNameread-onlycurrentThis object is used by the E1 Alarm profile table in order to identify a row of this table.
1.3.6.1.4.1.890.1.5.13.5.9.10.2.1.2Columne1AlarmProfileQEsread-writecurrent15Min error second
1.3.6.1.4.1.890.1.5.13.5.9.10.2.1.3Columne1AlarmProfileQSesread-writecurrent15Min severe error second
1.3.6.1.4.1.890.1.5.13.5.9.10.2.1.4Columne1AlarmProfileQUasread-writecurrent15Min un-available second
1.3.6.1.4.1.890.1.5.13.5.9.10.2.1.5Columne1AlarmProfileDayEsread-writecurrent1Day error second
1.3.6.1.4.1.890.1.5.13.5.9.10.2.1.6Columne1AlarmProfileDaySesread-writecurrent1Day severe error second
1.3.6.1.4.1.890.1.5.13.5.9.10.2.1.7Columne1AlarmProfileDayUasread-writecurrent1Day un-available second
1.3.6.1.4.1.890.1.5.13.5.9.10.2.1.8Columne1AlarmProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.13.5.9.11Nodevdsl2Profile
1.3.6.1.4.1.890.1.5.13.5.9.11.1ScalarmaxNumOfVdsl2TemplateProfilesread-onlycurrentThe maximum number of VDSL2 template profiles supported by the system. This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.11.2ScalarmaxNumOfVdsl2LineProfilesread-onlycurrentThe maximum number of VDSL2 line profiles supported by the system. This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.11.3ScalarmaxNumOfVdsl2ChanProfilesread-onlycurrentThe maximum number of VDSL2 chan profiles supported by the system. This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.11.4ScalarmaxNumOfVdsl2AlarmTemplateProfilesread-onlycurrentThe maximum number of VDSL2 alarm template profiles supported by the system. This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.11.5ScalarmaxNumOfVdsl2AlarmLineProfilesread-onlycurrentThe maximum number of VDSL2 alarm line profiles supported by the system. This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.11.6ScalarmaxNumOfVdsl2AlarmChanProfilesread-onlycurrentThe maximum number of VDSL2 alarm chan profiles supported by the system. This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.11.7Tablevdsl2LineConfProfileExtendedTablenot-accessiblecurrentThis table contains information on the VDSL2 line profile extension configuration. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1Rowvdsl2LineConfProfileExtendedEntrynot-accessiblecurrentAn entry in vdsl2LineProfileExtendedEntry.
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.1Columnvdsl2LineProfDpboEPsdIDread-writecurrentstandard psd shape id for psd toolbox
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.2Columnvdsl2LineProfBitSwapDsread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.3Columnvdsl2LineProfBitSwapUsread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.4Columnvdsl2LineProfProfileNameread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.5Columnvdsl2LineProfDynamicDepthEnableDsread-writecurrentEnable the dynamic change of interleave depth.
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.6Columnvdsl2LineProfDynamicDepthEnableUsread-writecurrentEnable the dynamic change of interleave depth.
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.7Columnvdsl2LineProfSosTimeDsread-writecurrentThe parameter SOS-TIME-ds is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2). If the value of this parameter is not zero, the stan…
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.8Columnvdsl2LineProfSosTimeUsread-writecurrentThe parameter SOS-TIME-u s is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2). If the value of this parameter is not zero, the sta…
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.9Columnvdsl2LineProfSosCrcDsread-writecurrentThis parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub condition of the sta…
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.10Columnvdsl2LineProfSosCrcUsread-writecurrentThis parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds in order to arm the second sub condition of the sta…
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.11Columnvdsl2LineProfSosNToneDsread-writecurrentThis parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the …
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.12Columnvdsl2LineProfSosNToneUsread-writecurrentThis parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be degraded in order to arm the first sub-condition of the …
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.13Columnvdsl2LineProfSosMaxDsread-writecurrentThis parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the downstream direction performed within a…
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.14Columnvdsl2LineProfSosMaxUsread-writecurrentThis parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures in the downstream direction performed within a…
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.15Columnvdsl2LineProfSosMultiStepDsread-writecurrentIndicates the capabilities of the VTU-R to execute the SOS request in one step or in multiple steps in the downstream direction. The field is formatted as [ggg…
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.16Columnvdsl2LineProfSosMultiStepUsread-writecurrentIndicates the capabilities of the VTU-R to execute the SOS request in one step or in multiple steps in the downstream direction. The field is formatted as [ggg…
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.17Columnvdsl2LineProfRocEnableDsread-writecurrentEnable the robust overhead channel.
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.18Columnvdsl2LineProfRocEnableUsread-writecurrentEnable the robust overhead channel.
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.19Columnvdsl2LineProfRocSnrmDsread-writecurrentThe parameter is defined as the SNR margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the channel in…
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.20Columnvdsl2LineProfRocSnrmUsread-writecurrentThe parameter is defined as the SNR margin offset for the ROC channel in the downstream direction. The parameter is used in the specification of the channel in…
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.21Columnvdsl2LineProfRocMinInpDsread-writecurrentThis parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an intege…
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.22Columnvdsl2LineProfRocMinInpUsread-writecurrentThis parameter contains the minimum impulse noise protection to apply on the ROC in the downstream direction. The minimum impulse noise protection is an intege…
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.23Columnvdsl2LineProfDpboTyperead-writecurrent
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.24Columnvdsl2LineProfDpboEselMinread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.25Columnvdsl2LineProfCompatibleread-writecurrentCompatible to spectrum usage of adsl2 or adsl2+ line.
1.3.6.1.4.1.890.1.5.13.5.9.11.7.1.26Columnvdsl2LineProfTransmissionTyperead-writecurrentConfigure the desired transmission types. They are: vdsl2(0) adsl2+(1) adsl2(2) gdmt(3) t1413(4) glite(5) annex-m(6) annex-l(7)
1.3.6.1.4.1.890.1.5.13.5.9.11.8Tablevdsl2ChanConfProfileExtendedTablenot-accessiblecurrentThis table contains information on the VDSL2 channel profile extension configuration. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1Rowvdsl2ChanConfProfileExtendedEntrynot-accessiblecurrentAn entry in vdsl2ChanConfProfileExtendedEntry.
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.1Columnvdsl2ChanConfProfphyRdsread-writecurrentretransmission mode
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.2Columnvdsl2ChanConfProfphyRusread-writecurrentretransmission mode
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.3Columnvdsl2ChanConfProfProfileNameread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.4Columnvdsl2ChanConfProfGinpRtxModeDsread-createcurrentG.inp(G.998.4) support setting on downstream direction. The possible values are: Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is sup…
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.5Columnvdsl2ChanConfProfGinpRtxModeUsread-createcurrentG.inp(G.998.4) support setting on upstream direction. The possible values are: Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is suppo…
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.6Columnvdsl2ChanConfProfGinpEtrMaxDsread-createcurrentDefines the maximum allowed value for the ETR (Effective Throughput Rate).
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.7Columnvdsl2ChanConfProfGinpEtrMaxUsread-createcurrentDefines the maximum allowed value for the ETR (Effective Throughput Rate).
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.8Columnvdsl2ChanConfProfGinpEtrMinDsread-createcurrentDefines the minimum value for the ETR (Effective Throughput Rate).
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.9Columnvdsl2ChanConfProfGinpEtrMinUsread-createcurrentDefines the minimum value for the ETR (Effective Throughput Rate).
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.10Columnvdsl2ChanConfProfGinpNdrMaxDsread-createcurrentOverrules the wanted maximum data rate provided in the SetLineTrafficConfiguration
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.11Columnvdsl2ChanConfProfGinpNdrMaxUsread-createcurrentOverrules the wanted maximum data rate provided in the SetLineTrafficConfiguration
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.12Columnvdsl2ChanConfProfGinpShineRatioDsread-createcurrentThe assumed fraction (0.001 to 0.255) of NDR necessary to correct SHINE noise.
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.13Columnvdsl2ChanConfProfGinpShineRatioUsread-createcurrentThe assumed fraction (0.001 to 0.255) of NDR necessary to correct SHINE noise.
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.14Columnvdsl2ChanConfProfGinpLeftrThresholdDsread-createcurrentThe rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared.
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.15Columnvdsl2ChanConfProfGinpLeftrThresholdUsread-createcurrentThe rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared.
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.16Columnvdsl2ChanConfProfGinpMaxDelayDsread-createcurrentG.inp-specific value that overrules the traffic configuration setting.
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.17Columnvdsl2ChanConfProfGinpMaxDelayUsread-createcurrentG.inp-specific value that overrules the traffic configuration setting.
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.18Columnvdsl2ChanConfProfGinpMinDelayDsread-createcurrentG.inp-specific value that overrules the traffic configuration setting.
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.19Columnvdsl2ChanConfProfGinpMinDelayUsread-createcurrentG.inp-specific value that overrules the traffic configuration setting.
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.20Columnvdsl2ChanConfProfGinpInpMinDsread-createcurrentG.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0-31
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.21Columnvdsl2ChanConfProfGinpInpMinUsread-createcurrentG.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0-31
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.22Columnvdsl2ChanConfProfGinpReinCfgInpDsread-createcurrentG.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0-7
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.23Columnvdsl2ChanConfProfGinpReinCfgInpUsread-createcurrentG.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0-7
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.24Columnvdsl2ChanConfProfGinpReinCfgFreqDsread-createcurrentG.inp-specific value that overrules the traffic configuration setting. Unit is Hz. The possible values are: 100 - 100Hz 120 - 120Hz
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.25Columnvdsl2ChanConfProfGinpReinCfgFreqUsread-createcurrentG.inp-specific value that overrules the traffic configuration setting. Unit is Hz. The possible values are: 100 - 100Hz 120 - 120Hz
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.26Columnvdsl2ChanConfProfSosMinRateB0Dsread-createcurrentThis parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The value shall be coded as an unsigned intege…
1.3.6.1.4.1.890.1.5.13.5.9.11.8.1.27Columnvdsl2ChanConfProfSosMinRateB0Usread-createcurrentThis parameter specifies the minimum net data rate required for a valid SOS request in the downstream direction. The value shall be coded as an unsigned intege…
1.3.6.1.4.1.890.1.5.13.5.9.11.9Tablevdsl2LineAlarmConfProfileExtendedTablenot-accessiblecurrentThis table contains information on the VDSL2 line alarm profile extension configuration. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.11.9.1Rowvdsl2LineAlarmConfProfileExtendedEntrynot-accessiblecurrentAn entry in vdsl2LineAlarmConfProfileExtendedEntry.
1.3.6.1.4.1.890.1.5.13.5.9.11.9.1.1Columnxdsl2LineAlarmConfProfileXtucThresh15MinLofsread-writecurrentA threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtuc 1. The value 0 means that no threshold is specified for the associated counter. …
1.3.6.1.4.1.890.1.5.13.5.9.11.9.1.2Columnxdsl2LineAlarmConfProfileXturThresh15MinLofsread-writecurrentA threshold for the xdsl2PMLCurr15MLofs counter, when xdsl2PMLCurrUnit is xtur 2. The value 0 means that no threshold is specified for the associated counter. …
1.3.6.1.4.1.890.1.5.13.5.9.11.9.1.3Columnxdsl2LineAlarmConfProfileThresh15MinLprsread-writecurrentA threshold for the xdsl2PMLCurr15MLprs counter. The value 0 means that no threshold is specified for the associated counter. Units:seconds
1.3.6.1.4.1.890.1.5.13.5.9.11.9.1.4Columnxdsl2LineAlarmConfProfileProfileNameread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.9.11.9.1.5Columnxdsl2LineAlarmConfProfileXtucThresh15MinLolsread-writecurrentA threshold for the xdsl2PMLCurr15MLols counter, when xdsl2PMLCurrUnit is xtuc. The value 0 means that no threshold is specified for the associated counter. Un…
1.3.6.1.4.1.890.1.5.13.5.9.11.10Tablevdsl2LineConfTempExtendedTablenot-accessiblecurrentThis table contains information on the VDSL2 line template profile extension configuration. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.11.10.1Rowvdsl2LineConfTempExtendedEntrynot-accessiblecurrentAn entry in vdsl2LineConfTempExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.9.11.10.1.1Columnvdsl2LineConfTempTemplateNameread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.9.11.10.1.2Columnvdsl2LineConfTempTemplatePortMapread-onlycurrentProfile mapping port list
1.3.6.1.4.1.890.1.5.13.5.9.11.10.1.3Columnvdsl2LineConfTempInmProfileread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.9.11.11Tablevdsl2AlarmConfTempExtendedTablenot-accessiblecurrentThis table contains information on the VDSL2 line alarm template profile extension configuration. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.11.11.1Rowvdsl2AlarmConfTempExtendedEntrynot-accessiblecurrentAn entry in vdsl2AlarmConfTempExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.9.11.11.1.1Columnvdsl2AlarmConfTempTemplateNameread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.9.11.12Tablevdsl2ChanAlarmConfProfileExtendedTablenot-accessiblecurrentThis table contains information on the VDSL2 channel alarm profile extension configuration. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.11.12.1Rowvdsl2ChanAlarmConfProfileExtendedEntrynot-accessiblecurrentAn entry in vdsl2ChanAlarmConfProfileExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.9.11.12.1.1Columnvdsl2ChanAlarmConfProfProfileNameread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.9.11.13ScalarmaxNumOfVdsl2InmProfilesread-onlycurrentThe maximum number of VDSL2 Inm profiles supported by the system. This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.9.11.14Tablevdsl2InmConfProfileExtendedTablenot-accessiblecurrentvdsl2InmConfProfileExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.9.11.14.1Rowvdsl2InmConfProfileExtendedEntrynot-accessiblecurrentvdsl2InmConfProfileExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.9.11.14.1.1Columnxdsl2InmConfProfProfileNamenot-accessiblecurrentThis object identifies a row in this table.
1.3.6.1.4.1.890.1.5.13.5.9.11.14.1.2Columnxdsl2InmConfProfVtucInpEqread-writecurrentThe INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM_INPEQ_MODE defines the way of computation of Equivalent INP, as defined in ITU-T…
1.3.6.1.4.1.890.1.5.13.5.9.11.14.1.3Columnxdsl2InmConfProfVturInpEqread-writecurrentThe INM Inmpulse Noise Protection Equivalent Mode. Configuration parameter INM_INPEQ_MODE defines the way of computation of Equivalent INP, as defined in ITU-T…
1.3.6.1.4.1.890.1.5.13.5.9.11.14.1.4Columnxdsl2InmConfProfVtucCCread-writecurrentThe INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbo…
1.3.6.1.4.1.890.1.5.13.5.9.11.14.1.5Columnxdsl2InmConfProfVturCCread-writecurrentThe INM Cluster Continuation. The valid values for INMCC range from 0 from 64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded symbo…
1.3.6.1.4.1.890.1.5.13.5.9.11.14.1.6Columnxdsl2InmConfProfVtucIATOread-writecurrentThe INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol.
1.3.6.1.4.1.890.1.5.13.5.9.11.14.1.7Columnxdsl2InmConfProfVturIATOread-writecurrentThe INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol.
1.3.6.1.4.1.890.1.5.13.5.9.11.14.1.8Columnxdsl2InmConfProfVtucIATSread-writecurrentThe INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival…
1.3.6.1.4.1.890.1.5.13.5.9.11.14.1.9Columnxdsl2InmConfProfVturIATSread-writecurrentThe INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for INMIATS range from 0 from 7 in steps. The range of values of inter-arrival…
1.3.6.1.4.1.890.1.5.13.5.9.11.14.1.10Columnxdsl2InmConfProfRowStatusread-createcurrentThis object is used to create a new row or to modify or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.9.11.14.1.11Columnxdsl2InmConfProfVtucISDBUSread-writecurrentISDD sensitivity of VTU-C, -128~127 in unit of 0.1dB.
1.3.6.1.4.1.890.1.5.13.5.9.12NodequeueRateLimitProfile
1.3.6.1.4.1.890.1.5.13.5.9.12.1ScalarmaxNumOfQueueRateLimitProfilesread-onlycurrentThe maximum number of Queue Rate Limit profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.12.2TablequeueRateLimitProfileTablenot-accessiblecurrentThis table includes Queue Rate Limit related configuration.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1RowqueueRateLimitProfileEntrynot-accessiblecurrentAn entry in queueRateLimitProfileTable.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.1ColumnqueueRateLimitProfileNameread-onlycurrentThis object is used by the Queue Rate Limit profile table and Queue Rate Limit Profile Queue table in order to identify a row of these table.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.2ColumnqueueRateLimitProfileQueue0CIRread-writecurrentCIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.3ColumnqueueRateLimitProfileQueue0PIRread-writecurrentPIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.4ColumnqueueRateLimitProfileQueue1CIRread-writecurrentCIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.5ColumnqueueRateLimitProfileQueue1PIRread-writecurrentPIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.6ColumnqueueRateLimitProfileQueue2CIRread-writecurrentCIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.7ColumnqueueRateLimitProfileQueue2PIRread-writecurrentPIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.8ColumnqueueRateLimitProfileQueue3CIRread-writecurrentCIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.9ColumnqueueRateLimitProfileQueue3PIRread-writecurrentPIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.10ColumnqueueRateLimitProfileQueue4CIRread-writecurrentCIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.11ColumnqueueRateLimitProfileQueue4PIRread-writecurrentPIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.12ColumnqueueRateLimitProfileQueue5CIRread-writecurrentCIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.13ColumnqueueRateLimitProfileQueue5PIRread-writecurrentPIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.14ColumnqueueRateLimitProfileQueue6CIRread-writecurrentCIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.15ColumnqueueRateLimitProfileQueue6PIRread-writecurrentPIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.16ColumnqueueRateLimitProfileQueue7CIRread-writecurrentCIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.17ColumnqueueRateLimitProfileQueue7PIRread-writecurrentPIR of a queue between 0~99968 in kbps in step of 64,'0' means no limiting.
1.3.6.1.4.1.890.1.5.13.5.9.12.2.1.18ColumnqueueRateLimitProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.13.5.9.13Nodeipqos2Profile
1.3.6.1.4.1.890.1.5.13.5.9.13.1ScalarmaxNumOfIpqos2Profilesread-onlycurrentThe maximum number of IPQoS2 profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.9.13.2Tableipqos2ProfileTablenot-accessiblecurrentThis table includes IPQoS2 profiles.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1Rowipqos2ProfileEntrynot-accessiblecurrentAn entry in ipqos2ProfileTable.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.1Columnipqos2ProfileNameread-onlycurrentprofile name.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.2Columnipqos2ProfileAlgorithmread-writecurrent1:sp, 2:wfq, 3-sp+wfq, 4:shaping, 5:vc-shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.3Columnipqos2ProfileVcLevelread-writecurrentlevel of the PVC. For vc-shaping only. Displayed as -1 when ipqos2ProfileAlgorithm is not vc-shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.4Columnipqos2ProfileVcMaxRateread-writecurrentmax rate of the queues of PVCs. For vc-shaping only. Displayed as -1 when ipqos2ProfileAlgorithm is not vc-shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.5Columnipqos2ProfileVcDepthread-writecurrentdepth of queues of PVCs. For vc-shaping only. Displayed as -1 when ipqos2ProfileAlgorithm is not vc-shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.6Columnipqos2ProfileQueue0Weightread-writecurrentweight of queue 0 of PVCs. For wfq, sp+wfq only. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.7Columnipqos2ProfileQueue0MaxRateread-writecurrentmax rate of queue 0 of PVCs. For shaping only. Displayed as -1 when ipqos2ProfileAlgorithm is not shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.8Columnipqos2ProfileQueue0Depthread-writecurrentdepth of queue 0 of PVCs. For wfq, sp+wfq, shaping. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq, shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.9Columnipqos2ProfileQueue1Weightread-writecurrentweight of queue 1 of PVCs. For wfq, sp+wfq only. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.10Columnipqos2ProfileQueue1MaxRateread-writecurrentmax rate of queue 1 of PVCs. For shaping only. Displayed as -1 when ipqos2ProfileAlgorithm is not shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.11Columnipqos2ProfileQueue1Depthread-writecurrentdepth of queue 1 of PVCs. For wfq, sp+wfq, shaping. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq, shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.12Columnipqos2ProfileQueue2Weightread-writecurrentweight of queue 2 of PVCs. For wfq, sp+wfq only. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.13Columnipqos2ProfileQueue2MaxRateread-writecurrentmax rate of queue 2 of PVCs. For shaping only. Displayed as -1 when ipqos2ProfileAlgorithm is not shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.14Columnipqos2ProfileQueue2Depthread-writecurrentdepth of queue 2 of PVCs. For wfq, sp+wfq, shaping. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq, shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.15Columnipqos2ProfileQueue3Weightread-writecurrentweight of queue 3 of PVCs. For wfq, sp+wfq only. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.16Columnipqos2ProfileQueue3MaxRateread-writecurrentmax rate of queue 3 of PVCs. For shaping only. Displayed as -1 when ipqos2ProfileAlgorithm is not shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.17Columnipqos2ProfileQueue3Depthread-writecurrentdepth of queue 3 of PVCs. For wfq, sp+wfq, shaping. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq, shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.18Columnipqos2ProfileQueue4Weightread-writecurrentweight of queue 4 of PVCs. For wfq, sp+wfq only. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.19Columnipqos2ProfileQueue4MaxRateread-writecurrentmax rate of queue 4 of PVCs. For shaping only. Displayed as -1 when ipqos2ProfileAlgorithm is not shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.20Columnipqos2ProfileQueue4Depthread-writecurrentdepth of queue 4 of PVCs. For wfq, sp+wfq, shaping. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq, shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.21Columnipqos2ProfileQueue5Weightread-writecurrentweight of queue 5 of PVCs. For wfq, sp+wfq only. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq, shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.22Columnipqos2ProfileQueue5MaxRateread-writecurrentmax rate of queue 5 of PVCs. For shaping only. Displayed as -1 when ipqos2ProfileAlgorithm is not shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.23Columnipqos2ProfileQueue5Depthread-writecurrentdepth of queue 5 of PVCs. For wfq, sp+wfq, shaping. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq, shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.24Columnipqos2ProfileQueue6Weightread-writecurrentweight of queue 6 of PVCs. For wfq, sp+wfq only. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.25Columnipqos2ProfileQueue6MaxRateread-writecurrentmax rate of queue 6 of PVCs. For shaping only. Displayed as -1 when ipqos2ProfileAlgorithm is not shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.26Columnipqos2ProfileQueue6Depthread-writecurrentdepth of queue 6 of PVCs. For wfq, sp+wfq, shaping. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq, shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.27Columnipqos2ProfileQueue7Weightread-writecurrentweight of queue 7 of PVCs. For wfq, sp+wfq only. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.28Columnipqos2ProfileQueue7MaxRateread-writecurrentmax rate of queue 7 of PVCs. For shaping only. Displayed as -1 when ipqos2ProfileAlgorithm is not shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.29Columnipqos2ProfileQueue7Depthread-writecurrentdepth of queue 7 of PVCs. For wfq, sp+wfq, shaping. Displayed as -1 when ipqos2ProfileAlgorithm is not wfq, sp+wfq, shaping.
1.3.6.1.4.1.890.1.5.13.5.9.13.2.1.30Columnipqos2ProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.13.5.10Nodeswitch
1.3.6.1.4.1.890.1.5.13.5.10.1ScalarmanagementVLANIdread-writecurrentThe VLAN ID for management.
1.3.6.1.4.1.890.1.5.13.5.10.2ScalarmaxNumOfStaticVlansread-onlycurrentThe maximum number of VLANs supported by the system.
1.3.6.1.4.1.890.1.5.13.5.10.3Nodeenetport
1.3.6.1.4.1.890.1.5.13.5.10.3.1TableenetPortTablenot-accessiblecurrentThe table contains ethernet port information.
1.3.6.1.4.1.890.1.5.13.5.10.3.1.1RowenetPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.10.3.1.1.1ColumnenetPortSpeedread-writecurrentSpeed configuration of the ethernet port.
1.3.6.1.4.1.890.1.5.13.5.10.3.1.1.2ColumnenetPortFlowControlread-writecurrentEnable/disable flow control for the ethernet port.
1.3.6.1.4.1.890.1.5.13.5.10.3.1.1.3ColumnenetPortModeread-writecurrentThe operational mode for uplink and subtending ports.
1.3.6.1.4.1.890.1.5.13.5.10.3.1.1.4ColumnenetPortVLANTrunkEnableread-writecurrentEnable/disable VLAN trunking for the ethernet port.
1.3.6.1.4.1.890.1.5.13.5.10.3.1.1.5ColumnenetPortDscpEnableread-writecurrentEnable/disable DSCP mapping for the ethernet port. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.3.1.1.6ColumnenetPortTpidread-writecurrentSet TPID value for the ethernet port, 0x0000 ~ 0xffff.
1.3.6.1.4.1.890.1.5.13.5.10.3.2TableenetPortSfpTablenot-accessiblecurrentThe table contains ethernet SFP port information.
1.3.6.1.4.1.890.1.5.13.5.10.3.2.1RowenetPortSfpEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.10.3.2.1.1ColumnsfpTempLowread-writecurrenttemperature low threshold in 0.001 degree.
1.3.6.1.4.1.890.1.5.13.5.10.3.2.1.2ColumnsfpTempHighread-writecurrenttemperature high threshold in 0.001 degree.
1.3.6.1.4.1.890.1.5.13.5.10.3.2.1.3ColumnsfpVccLowread-writecurrentvoltage low threshold in 0.0001V.
1.3.6.1.4.1.890.1.5.13.5.10.3.2.1.4ColumnsfpVccHighread-writecurrentvoltage high threshold in 0.0001V.
1.3.6.1.4.1.890.1.5.13.5.10.3.2.1.5ColumnsfpTxBiasLowread-writecurrentbias current low threshold in uA.
1.3.6.1.4.1.890.1.5.13.5.10.3.2.1.6ColumnsfpTxBiasHighread-writecurrentbias current high threshold in uA.
1.3.6.1.4.1.890.1.5.13.5.10.3.2.1.7ColumnsfpTxPowerLowread-writecurrenttx power low threshold in 0.001 uW.
1.3.6.1.4.1.890.1.5.13.5.10.3.2.1.8ColumnsfpTxPowerHighread-writecurrenttx power high threshold in 0.001 uW.
1.3.6.1.4.1.890.1.5.13.5.10.3.2.1.9ColumnsfpRxPowerLowread-writecurrenttx power low threshold in 0.001 uW.
1.3.6.1.4.1.890.1.5.13.5.10.3.2.1.10ColumnsfpRxPowerHighread-writecurrenttx power high threshold in 0.001 uW.
1.3.6.1.4.1.890.1.5.13.5.10.4Nodebandwidth
1.3.6.1.4.1.890.1.5.13.5.10.4.1TablebwPortTablenot-accessiblecurrentThe table contains bandwidth configuration for the ethernet ports.
1.3.6.1.4.1.890.1.5.13.5.10.4.1.1RowbwPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.10.4.1.1.1ColumnbwPortEnableread-writecurrentEnable/disable bandwidth control for the ethernet port.
1.3.6.1.4.1.890.1.5.13.5.10.4.1.1.2ColumnbwPortIngressRateread-writecurrentThe ingress rate for the ethernet port.
1.3.6.1.4.1.890.1.5.13.5.10.4.1.1.3ColumnbwPortEgressRateread-writecurrentThe egress rate for the ethernet port.
1.3.6.1.4.1.890.1.5.13.5.10.5Nodeqschedule
1.3.6.1.4.1.890.1.5.13.5.10.5.1TableqschedulePortTablenot-accessiblecurrentThe table contains queue schedule configuration for the ethernet ports.
1.3.6.1.4.1.890.1.5.13.5.10.5.1.1RowqschedulePortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.10.5.1.1.1ColumnqschedulePortTyperead-writecurrentQueue scheduling type (strictly priority queue or weighted round robin).
1.3.6.1.4.1.890.1.5.13.5.10.5.2TablequeueWeightTablenot-accessiblecurrentThe table contains weight configuration for the priority queues.
1.3.6.1.4.1.890.1.5.13.5.10.5.2.1RowqueueWeightEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.10.5.2.1.1ColumnqueueWeightread-writecurrentWeight for the priority queue.
1.3.6.1.4.1.890.1.5.13.5.10.6Nodedot3ad
1.3.6.1.4.1.890.1.5.13.5.10.6.1Tabledot3adTablenot-accessiblecurrentThe table contains 802.3ad configuration.
1.3.6.1.4.1.890.1.5.13.5.10.6.1.1Rowdot3adEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.10.6.1.1.1Columndot3adGroupIdread-onlycurrentGroup ID 1 for subtending group and 2 for uplink group in IES-5000/5005. Group ID 1~4 in IES-6000.
1.3.6.1.4.1.890.1.5.13.5.10.6.1.1.2Columndot3adEnableread-writecurrentEnable/disable 802.3ad function.
1.3.6.1.4.1.890.1.5.13.5.10.6.1.1.3Columndot3adGroupNameread-onlycurrentThe trunking group name.
1.3.6.1.4.1.890.1.5.13.5.10.6.1.1.4Columndot3adGroupPortListread-onlycurrentThe port list which joins the trunking group.
1.3.6.1.4.1.890.1.5.13.5.10.6.2ScalarlacpPriorityread-writecurrentLACP system priority.
1.3.6.1.4.1.890.1.5.13.5.10.6.3ScalarlacpTimeoutread-writecurrentThe time interval to exchange LACP packets in order to check that the peer port in the trunk group is still up.
1.3.6.1.4.1.890.1.5.13.5.10.6.4TableportTrunkingTablenot-accessiblecurrentThe table contains current status of port trunking.
1.3.6.1.4.1.890.1.5.13.5.10.6.4.1RowportTrunkingEntrynot-accessiblecurrentAn entry of portTrunkingTable.
1.3.6.1.4.1.890.1.5.13.5.10.6.4.1.1ColumnportTrunkingGroupIdread-onlycurrentGroup ID 1 for subtending group and 2 for uplink group in IES-5000/5005. Group ID 1~4 in IES-6000.
1.3.6.1.4.1.890.1.5.13.5.10.6.4.1.2ColumnportTrunkingStatusread-onlycurrentPort trunking status.
1.3.6.1.4.1.890.1.5.13.5.10.6.4.1.3ColumnportTrunkingPortListread-onlycurrentThe port list which actually joins the trunking group.
1.3.6.1.4.1.890.1.5.13.5.10.6.5TableaggPortTablenot-accessiblecurrentThe table specifies the setting of port trunking.
1.3.6.1.4.1.890.1.5.13.5.10.6.5.1RowaggPortEntrynot-accessiblecurrentAn entry of aggPortTable.
1.3.6.1.4.1.890.1.5.13.5.10.6.5.1.1ColumnaggPortJoinread-writecurrentJoin/disjoin the trunking group.
1.3.6.1.4.1.890.1.5.13.5.10.6.6TableelcPortTrunkingTablenot-accessiblecurrentThe table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.6.6.1RowelcPortTrunkingEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.10.6.6.1.1ColumnelcPortTrunkingSlotread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.10.6.6.1.2ColumnelcPortTrunkingGroupIdread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.10.6.6.1.3ColumnelcPortTrunkingStatusread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.10.6.6.1.4ColumnelcPortTrunkingPortListread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.10.7Nodestp
1.3.6.1.4.1.890.1.5.13.5.10.7.1ScalarrstpEnableread-writecurrentEnable/disable RSTP protocol.
1.3.6.1.4.1.890.1.5.13.5.10.8NodebcastCtrl
1.3.6.1.4.1.890.1.5.13.5.10.8.1TablebctrlPortTablenot-accessiblecurrentThe table contains broadcast storm control configuration for the ethernet ports.
1.3.6.1.4.1.890.1.5.13.5.10.8.1.1RowbctrlPortEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.10.8.1.1.1ColumnbctrlPortBcastEnableread-writecurrentEnable/disable storm control for broadcast packets.
1.3.6.1.4.1.890.1.5.13.5.10.8.1.1.2ColumnbctrlPortMcastEnableread-writecurrentEnable/disable storm control for multicast packets.
1.3.6.1.4.1.890.1.5.13.5.10.8.1.1.3ColumnbctrlPortUcastEnableread-writecurrentEnable/disable storm control for unicast packets.
1.3.6.1.4.1.890.1.5.13.5.10.8.1.1.4ColumnbctrlPortBcastThreshread-writecurrentThe threshold of broadcast storm control.
1.3.6.1.4.1.890.1.5.13.5.10.8.1.1.5ColumnbctrlPortMcastThreshread-writecurrentThe threshold of multicast storm control.
1.3.6.1.4.1.890.1.5.13.5.10.8.1.1.6ColumnbctrlPortUcastThreshread-writecurrentThe threshold of unicast storm control.
1.3.6.1.4.1.890.1.5.13.5.10.9NodeportIsolation
1.3.6.1.4.1.890.1.5.13.5.10.9.1ScalarportIsolationEnableread-writecurrentEnable/disable port isolation.
1.3.6.1.4.1.890.1.5.13.5.10.10Nodedscp
1.3.6.1.4.1.890.1.5.13.5.10.10.1TabledscpMappingPortTablenot-accessiblecurrentThe table contains DSCP mapping configuration for the ethernet ports. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.10.1.1RowdscpMappingPortEntrynot-accessiblecurrentAn entry of dscpMappingPortTable.
1.3.6.1.4.1.890.1.5.13.5.10.10.1.1.1ColumndscpMappingPortSrcCodePointread-onlycurrentThe DSCP source code point used for mapping.
1.3.6.1.4.1.890.1.5.13.5.10.10.1.1.2ColumndscpMappingPortMapCodePointread-writecurrentThe mapping code point that will replace the source code point in the incoming packet.
1.3.6.1.4.1.890.1.5.13.5.10.10.1.1.3ColumndscpMappingPortMapPriorityread-writecurrentThe mapping p bits that will replace the source p bits in the incoming packet.
1.3.6.1.4.1.890.1.5.13.5.10.11Nodemstp
1.3.6.1.4.1.890.1.5.13.5.10.11.1ScalarmstpEnableread-writecurrentEnable/disable MSTP protocol. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.11.2ScalarmstpProtocolVersionread-writecurrentThe MSTP protocol version. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.11.3ScalarmstpBridgeMaxAgeread-writecurrentThe value that all bridges use for MaxAge when this bridge is acting as the root. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.11.4ScalarmstpBridgeHelloTimeread-writecurrentThe value that all bridges use for HelloTime when this bridge is acting as the root. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.11.5ScalarmstpBridgeForwardDelayread-writecurrentThe value that all bridges use for ForwardDelay when this bridge is acting as the root. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.11.6ScalarmstpMaxHopsread-writecurrentThe maximum hops that is allowed. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.11.7ScalarmstpCfgNameread-writecurrentThe configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier. This object is s…
1.3.6.1.4.1.890.1.5.13.5.10.11.8ScalarmstpCfgRevLevelread-writecurrentThis object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier.…
1.3.6.1.4.1.890.1.5.13.5.10.11.9ScalarmstpCfgDigestread-onlycurrentConfiguration Digest. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.11.10TablemstpMapTablenot-accessiblecurrentThis table contains one entry for each instance of MSTP. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.11.10.1RowmstpMapEntrynot-accessiblecurrentA conceptual row containing the status of the MSTP instance.
1.3.6.1.4.1.890.1.5.13.5.10.11.10.1.1ColumnmstpMapIndexread-onlycurrentUniquely identifies an instance.
1.3.6.1.4.1.890.1.5.13.5.10.11.10.1.2ColumnmstpMapVlans1kread-writecurrentA string of octets containing one bit per VLAN for VLANS with VlanIndex values 0 through 1023. The first octet corresponds to VLANs with VlanIndex values 0 thr…
1.3.6.1.4.1.890.1.5.13.5.10.11.10.1.3ColumnmstpMapVlans2kread-writecurrentA string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 10…
1.3.6.1.4.1.890.1.5.13.5.10.11.10.1.4ColumnmstpMapVlans3kread-writecurrentA string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values 20…
1.3.6.1.4.1.890.1.5.13.5.10.11.10.1.5ColumnmstpMapVlans4kread-writecurrentA string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 30…
1.3.6.1.4.1.890.1.5.13.5.10.11.11TablemstpVlanTablenot-accessiblecurrentThis table contains one entry for each VlanId. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.11.11.1RowmstpVlanEntrynot-accessiblecurrentInformation regarding the instance to which each Vlan is mapped.
1.3.6.1.4.1.890.1.5.13.5.10.11.11.1.1ColumnmstpVlanIndexread-onlycurrentThe VlanId for which this entry contains the instance mapped.
1.3.6.1.4.1.890.1.5.13.5.10.11.11.1.2ColumnmstpVlanMstIndexread-onlycurrentAn integer with values ranging from 0 to 64 that identify a the CIST/MSTI instance to which this VLAN is mapped
1.3.6.1.4.1.890.1.5.13.5.10.11.12TablemstpPortTablenot-accessiblecurrentA table that contains port-specific MSTP information. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.11.12.1RowmstpPortEntrynot-accessiblecurrentA list of MSTP information maintained by each port.
1.3.6.1.4.1.890.1.5.13.5.10.11.12.1.1ColumnmstpPortAdminEdgePortread-writecurrentThe administrative value of the Edge Port parameter. A value of true(1) indicates that this port should be assumed as an edge-port and a value of false(2) indi…
1.3.6.1.4.1.890.1.5.13.5.10.11.12.1.2ColumnmstpPortAdminPointToPointread-writecurrentThe administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as…
1.3.6.1.4.1.890.1.5.13.5.10.11.13TablemstpXstTablenot-accessiblecurrentBridge priority configuration for multiple spanning trees. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.11.13.1RowmstpXstEntrynot-accessiblecurrentAn entry of mstpXstTable.
1.3.6.1.4.1.890.1.5.13.5.10.11.13.1.1ColumnmstpXstIdread-onlycurrentIdentifies a spanning tree.
1.3.6.1.4.1.890.1.5.13.5.10.11.13.1.2ColumnmstpXstBridgePriorityread-writecurrentBridge priority, in steps of 4096.
1.3.6.1.4.1.890.1.5.13.5.10.11.14TablemstpXstPortTablenot-accessiblecurrentPort configuration for multiple spanning trees. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.11.14.1RowmstpXstPortEntrynot-accessiblecurrentAn entry of mstpXstPortTable.
1.3.6.1.4.1.890.1.5.13.5.10.11.14.1.1ColumnmstpXstPortXstIdread-onlycurrentIdentifies a spanning tree.
1.3.6.1.4.1.890.1.5.13.5.10.11.14.1.2ColumnmstpXstPortIndexread-onlycurrentThe port number of the port for which this entry contains MSTP management information.
1.3.6.1.4.1.890.1.5.13.5.10.11.14.1.3ColumnmstpXstPortEnableread-writecurrentThe enabled/disabled status of the port.
1.3.6.1.4.1.890.1.5.13.5.10.11.14.1.4ColumnmstpXstPortPriorityread-writecurrentThe value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
1.3.6.1.4.1.890.1.5.13.5.10.11.14.1.5ColumnmstpXstPortAdminPathCostread-writecurrentThe contribution of this port to the path cost of paths towards the spanning tree root which include this port. 0 menas it is determined by link speed.
1.3.6.1.4.1.890.1.5.13.5.10.12NodevlanIsolation
1.3.6.1.4.1.890.1.5.13.5.10.12.1TablevlanIsolationTablenot-accessiblecurrentA table contains configuration of isolated VLAN. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.12.1.1RowvlanIsolationEntrynot-accessiblecurrentAn entry of vlanIsolationTable.
1.3.6.1.4.1.890.1.5.13.5.10.12.1.1.1ColumnvlanIsolationRowStatusread-createcurrentRow status of the table used to create/delete an entry.
1.3.6.1.4.1.890.1.5.13.5.10.13Nodemac
1.3.6.1.4.1.890.1.5.13.5.10.13.1ScalarmacAgingTimeread-writecurrentThe mac aging time in seconds.
1.3.6.1.4.1.890.1.5.13.5.10.14Nodecfm
1.3.6.1.4.1.890.1.5.13.5.10.14.1TablecfmLoopbackPortTablenot-accessiblecurrentA table that contains CFM information. This table is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.14.1.1RowcfmLoopbackPortEntrynot-accessiblecurrentAn entry in cfmLoopbackPortTable.
1.3.6.1.4.1.890.1.5.13.5.10.14.1.1.1ColumncfmLoopbackPortStateread-writecurrentCFM loopback enable/disable on the port.
1.3.6.1.4.1.890.1.5.13.5.10.14.2TablecfmMIPTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.10.14.2.1RowcfmMIPEntrynot-accessiblecurrentAn entry in cfmMIPTable.
1.3.6.1.4.1.890.1.5.13.5.10.14.2.1.1ColumncfmLevelread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.10.14.2.1.2ColumncfmVlanIDread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.10.14.2.1.3ColumncfmPortread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.10.14.2.1.4ColumncfmMIPRowStatusread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.10.14.2.1.5ColumncfmMIPMacAddressread-createcurrentMAC address of maintenance domain intermediate point
1.3.6.1.4.1.890.1.5.13.5.10.14.3ScalarcfmActionEnableStatusread-writecurrentCFM Action enable status for the CO device
1.3.6.1.4.1.890.1.5.13.5.10.14.4ScalarcfmModeread-writecurrentThe compliant CFM standard
1.3.6.1.4.1.890.1.5.13.5.10.14.5ScalarcfmMIPRespondMcastLbmread-writecurrentThe status indicate whether a MIP respond to mulcast lbms or not.
1.3.6.1.4.1.890.1.5.13.5.10.14.6ScalarcfmLoopbackTimeoutread-writecurrentCFM loopback timeout value.
1.3.6.1.4.1.890.1.5.13.5.10.14.7TablecfmLbrTablenot-accessiblecurrentThis table contains a list of Loopback replies received by a specific MEP in response to a loopback message.
1.3.6.1.4.1.890.1.5.13.5.10.14.7.1RowcfmLbrEntrynot-accessiblecurrentThe Loopback Reply table entry.
1.3.6.1.4.1.890.1.5.13.5.10.14.7.1.1ColumncfmLbrSeqNumbernot-accessiblecurrentTransaction identifier/Sequence number returned by a previous transmit loopback message command, indicating which LBM's response is going to be returned.
1.3.6.1.4.1.890.1.5.13.5.10.14.7.1.2ColumncfmLbrReceiveOrdernot-accessiblecurrentAn index to distinguish among multiple LBRs with the same LBR Transaction Identifier field value. cfmLbrReceiveOrder are assigned sequentially from 1, in the o…
1.3.6.1.4.1.890.1.5.13.5.10.14.7.1.3ColumncfmLbrSrcMacread-onlycurrentSource MAC address returned in the LBR.
1.3.6.1.4.1.890.1.5.13.5.10.15Nodeoam
1.3.6.1.4.1.890.1.5.13.5.10.15.1TableremoteLoopbackTablenot-accessiblecurrentA table that contains OAM information. This table is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.15.1.1RowremoteLoopbackEntrynot-accessiblecurrentAn entry in remoteLoopbackTable.
1.3.6.1.4.1.890.1.5.13.5.10.15.1.1.1ColumnremoteLoopbackEnableread-writecurrentOAM remote loopback enable/disable on the port.
1.3.6.1.4.1.890.1.5.13.5.10.16Nodevlanpriority
1.3.6.1.4.1.890.1.5.13.5.10.16.1ScalarvlanpriorityEnableread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.10.16.2TablevlanpriorityTablenot-accessiblecurrentA table that contains VLAN Priority information. This table is supported by R5.04 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.16.2.1RowvlanpriorityEntrynot-accessiblecurrentAn entry in vlanpriorityTable.
1.3.6.1.4.1.890.1.5.13.5.10.16.2.1.1ColumnvlanpriorityVidread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.10.16.2.1.2ColumnvlanpriorityPriread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.10.16.2.1.3ColumnvlanpriorityRowStatusread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.10.17Nodemirror
1.3.6.1.4.1.890.1.5.13.5.10.17.1ScalarmirrorEnableread-writecurrentset to 'enable' to enable mirroring
1.3.6.1.4.1.890.1.5.13.5.10.17.2ScalarmirrorMonitorPortread-writecurrentmonitor port
1.3.6.1.4.1.890.1.5.13.5.10.17.3TablemirrorPortTablenot-accessiblecurrentThis table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.10.17.3.1RowmirrorPortEntrynot-accessiblecurrentAn entry in mirrorPortTable.
1.3.6.1.4.1.890.1.5.13.5.10.17.3.1.1ColumnmirrorPortDirectionread-writecurrentSet to 'ingress' to mirror ingress traffic, 'egress' to mirror egress traffic, 'both' to mirror bi-directional traffic, 'none' to disable mirroring in this port
1.3.6.1.4.1.890.1.5.13.5.10.18Nodelldp
1.3.6.1.4.1.890.1.5.13.5.10.18.1ScalarlldpEnableread-writecurrentset to 'enable' to enable lldp
1.3.6.1.4.1.890.1.5.13.5.11Nodesys
1.3.6.1.4.1.890.1.5.13.5.11.1NodesysState
1.3.6.1.4.1.890.1.5.13.5.11.1.1ScalarsystemStatusread-onlycurrentThis variable indicates the alarm status of the module. It is a bit map represented a sum, therefore, it can represent multiple defects simultaneously. The mod…
1.3.6.1.4.1.890.1.5.13.5.11.1.2NodeledStatus
1.3.6.1.4.1.890.1.5.13.5.11.1.2.1ScalarledAlarmStatusread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.11.1.3NodechassisStats
1.3.6.1.4.1.890.1.5.13.5.11.1.3.1ScalardcPowerStatusread-onlycurrentThis variable indicates the status of DC Power Status. The dcPowerStatus is a bit map represented as a sum, therefore, it can represent multiple defects simult…
1.3.6.1.4.1.890.1.5.13.5.11.1.4ScalarextAlarmStatusread-onlycurrentThis variable indicates the status of the external alarm. Every bit record one kind of external alarm, and there are totally 4 kind of them. Every bit of the v…
1.3.6.1.4.1.890.1.5.13.5.11.2NodesysOperation
1.3.6.1.4.1.890.1.5.13.5.11.2.1ScalarsysTargetread-writecurrentIfIndex of the operation target.
1.3.6.1.4.1.890.1.5.13.5.11.2.2ScalarsysOpsread-writecurrentThe manager sets the corresponding bit value to 1 to start the operation and the agent clears the object to zero when the operation is successfully completed. …
1.3.6.1.4.1.890.1.5.13.5.11.2.3ScalarsysRebootTimeread-writecurrentWrite a non-zero value to schedule a reboot. Write '0' to cancel it. When read, it returns the remaining time to the schedule reboot.
1.3.6.1.4.1.890.1.5.13.5.11.3NodehwMonitor
1.3.6.1.4.1.890.1.5.13.5.11.3.1TablefanRpmTablenot-accessiblecurrentA table that contains rpm information about the fans.
1.3.6.1.4.1.890.1.5.13.5.11.3.1.1RowfanRpmEntrynot-accessiblecurrentA list of rpm information for each fan.
1.3.6.1.4.1.890.1.5.13.5.11.3.1.1.1ColumnfanRpmIndexread-onlycurrentThe identity of the fan.
1.3.6.1.4.1.890.1.5.13.5.11.3.1.1.2ColumnfanRpmCurValueread-onlycurrentThe current rpm of the fan.
1.3.6.1.4.1.890.1.5.13.5.11.3.1.1.3ColumnfanRpmMaxValueread-onlycurrentThe maximum rpm ever performed by the fan.
1.3.6.1.4.1.890.1.5.13.5.11.3.1.1.4ColumnfanRpmMinValueread-onlycurrentThe minimum rpm ever performed by the fan.
1.3.6.1.4.1.890.1.5.13.5.11.3.1.1.5ColumnfanRpmLowThreshread-writecurrentThe low threshold of the rpm of the fan.
1.3.6.1.4.1.890.1.5.13.5.11.3.1.1.6ColumnfanRpmDescrread-onlycurrentThe description of the fan (e.g. location, function, etc.).
1.3.6.1.4.1.890.1.5.13.5.11.3.1.1.7ColumnfanRpmHighThreshread-writecurrentThe high threshold of the rpm of the fan.
1.3.6.1.4.1.890.1.5.13.5.11.3.2TablevoltageTablenot-accessiblecurrentA table that contains voltage information about the system.
1.3.6.1.4.1.890.1.5.13.5.11.3.2.1RowvoltageEntrynot-accessiblecurrentA list of voltage information for each sensor.
1.3.6.1.4.1.890.1.5.13.5.11.3.2.1.1ColumnvoltageIndexread-onlycurrentThe identity of the sensor.
1.3.6.1.4.1.890.1.5.13.5.11.3.2.1.2ColumnvoltageCurValueread-onlycurrentThe current voltage detected by the sensor.
1.3.6.1.4.1.890.1.5.13.5.11.3.2.1.3ColumnvoltageMaxValueread-onlycurrentThe maximum voltage ever detected by the sensor.
1.3.6.1.4.1.890.1.5.13.5.11.3.2.1.4ColumnvoltageMinValueread-onlycurrentThe minimum voltage ever detected by the sensor.
1.3.6.1.4.1.890.1.5.13.5.11.3.2.1.5ColumnvoltageNominalValueread-onlycurrentThe nominal voltage which the power should supply.
1.3.6.1.4.1.890.1.5.13.5.11.3.2.1.6ColumnvoltageLowThreshread-writecurrentThe low threshold of the voltage.
1.3.6.1.4.1.890.1.5.13.5.11.3.2.1.7ColumnvoltageDescrread-onlycurrentThe description of the voltage (e.g. location, nominal value, etc.).
1.3.6.1.4.1.890.1.5.13.5.11.3.2.1.8ColumnvoltageHighThreshread-writecurrentThe high threshold of the voltage.
1.3.6.1.4.1.890.1.5.13.5.11.3.3TabletemperatureTablenot-accessiblecurrentA table that contains temperature information.
1.3.6.1.4.1.890.1.5.13.5.11.3.3.1RowtemperatureEntrynot-accessiblecurrentA list of temperature information for each sensor.
1.3.6.1.4.1.890.1.5.13.5.11.3.3.1.1ColumntemperatureIndexread-onlycurrentThe identity of the sensor.
1.3.6.1.4.1.890.1.5.13.5.11.3.3.1.2ColumntemperatureCurValueread-onlycurrentThe current temperature detected by the sensor.
1.3.6.1.4.1.890.1.5.13.5.11.3.3.1.3ColumntemperatureMaxValueread-onlycurrentThe maximum temperature ever detected by the sensor.
1.3.6.1.4.1.890.1.5.13.5.11.3.3.1.4ColumntemperatureMinValueread-onlycurrentThe minimum temperature ever detected by the sensor.
1.3.6.1.4.1.890.1.5.13.5.11.3.3.1.5ColumntemperatureHighThreshread-writecurrentThe high threshold of the temperature.
1.3.6.1.4.1.890.1.5.13.5.11.3.3.1.6ColumntemperatureDescrread-onlycurrentThe description of the temperature sensor (e.g. location, function, etc.).
1.3.6.1.4.1.890.1.5.13.5.11.3.3.1.7ColumntemperatureLowThreshread-writecurrentThe low threshold of the temperature.
1.3.6.1.4.1.890.1.5.13.5.11.3.4TablecpuUtilizationTablenot-accessiblecurrentA table that contains CPU utilization information. This table is supported by R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.11.3.4.1RowcpuUtilizationEntrynot-accessiblecurrentAn entry of cpuUtilizationTable.
1.3.6.1.4.1.890.1.5.13.5.11.3.4.1.1ColumncpuIndexread-onlycurrentThe identity of the CPU.
1.3.6.1.4.1.890.1.5.13.5.11.3.4.1.2ColumncpuCurValueread-onlycurrentThe CPU utilization in the past 60 seconds.
1.3.6.1.4.1.890.1.5.13.5.11.3.4.1.3ColumncpuMaxValueread-onlycurrentThe maximum CPU utilization ever detected.
1.3.6.1.4.1.890.1.5.13.5.11.3.4.1.4ColumncpuHighThreshread-writecurrentThe high threshold of CPU usage. If cpuCurValue is larger than the threshold, the device will initiate the eqptCpuHigh trap. This trap is supported by R1.03 an…
1.3.6.1.4.1.890.1.5.13.5.11.3.4.1.5ColumncpuDescrread-onlycurrentThe description of the CPU. This trap is supported by R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.11.3.5TablepacketBufferUsageTablenot-accessiblecurrentA table that contains packet buffer usage information.
1.3.6.1.4.1.890.1.5.13.5.11.3.5.1RowpacketBufferUsageEntrynot-accessiblecurrentAn entry of packetBufferUsageTable.
1.3.6.1.4.1.890.1.5.13.5.11.3.5.1.1ColumnpacketBufferIndexread-onlycurrentThe identity of the packet buffer.
1.3.6.1.4.1.890.1.5.13.5.11.3.5.1.2ColumnpacketBufferCurValueread-onlycurrentThe packet buffer usage in the past 60 seconds.
1.3.6.1.4.1.890.1.5.13.5.11.3.5.1.3ColumnpacketBufferMaxValueread-onlycurrentThe maximum packet buffer usage ever detected.
1.3.6.1.4.1.890.1.5.13.5.11.3.5.1.4ColumnpacketBufferHighThreshread-writecurrentThe high threshold of packet buffer usage. If packetBufferCurValue is larger than the threshold, the device will initiate the eqptPacketBufferUsageHigh trap.
1.3.6.1.4.1.890.1.5.13.5.11.3.5.1.5ColumnpacketBufferDescrread-onlycurrentThe description of the packet buffer.
1.3.6.1.4.1.890.1.5.13.5.11.3.6TablememoryUsageTablenot-accessiblecurrentA table that contains memory usage information.
1.3.6.1.4.1.890.1.5.13.5.11.3.6.1RowmemoryUsageEntrynot-accessiblecurrentAn entry of memoryUsageTable.
1.3.6.1.4.1.890.1.5.13.5.11.3.6.1.1ColumnmemoryIndexread-onlycurrentThe identity of the memory.
1.3.6.1.4.1.890.1.5.13.5.11.3.6.1.2ColumnmemoryCurValueread-onlycurrentThe memory usage in the past 60 seconds.
1.3.6.1.4.1.890.1.5.13.5.11.3.6.1.3ColumnmemoryMaxValueread-onlycurrentThe maximum memory usage ever detected.
1.3.6.1.4.1.890.1.5.13.5.11.3.6.1.4ColumnmemoryHighThreshread-writecurrentThe high threshold of memory usage. If memoryCurValue is larger than the threshold, the device will initiate the eqptMemoryUsageHigh trap.
1.3.6.1.4.1.890.1.5.13.5.11.3.6.1.5ColumnmemoryDescrread-onlycurrentThe description of the memory.
1.3.6.1.4.1.890.1.5.13.5.11.3.7ScalarfanPositionread-onlycurrentfan airflow is only supported on IES-6100
1.3.6.1.4.1.890.1.5.13.5.11.4NodetimeSetup
1.3.6.1.4.1.890.1.5.13.5.11.4.1ScalartimeServerModeread-writecurrentThe mechanism of Time Server when the system boots up.
1.3.6.1.4.1.890.1.5.13.5.11.4.2ScalartimeServerIPread-writecurrentThe IP Address of Time Server.
1.3.6.1.4.1.890.1.5.13.5.11.4.3ScalarsystemTimeread-writecurrentThe system time in the format 'HH:MM:SS'.
1.3.6.1.4.1.890.1.5.13.5.11.4.4ScalarsystemDateread-writecurrentThe system date in the format 'YYYY-MM-DD'
1.3.6.1.4.1.890.1.5.13.5.11.4.5ScalarsystemTimeZoneread-writecurrentThe system time zone.
1.3.6.1.4.1.890.1.5.13.5.11.4.6ScalartimeServerSyncread-writecurrentSet the object to 1 to synchronize with the time server.
1.3.6.1.4.1.890.1.5.13.5.11.4.7NodedayLightSaving
1.3.6.1.4.1.890.1.5.13.5.11.4.7.1ScalardayLightSavingAdminStatusread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.4.7.2NodedayLightSavingStartTime
1.3.6.1.4.1.890.1.5.13.5.11.4.7.2.1ScalardayLightSavingStartMonthread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.4.7.2.2ScalardayLightSavingStartWeekread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.4.7.2.3ScalardayLightSavingStartWdayread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.4.7.2.4ScalardayLightSavingStartHourread-writecurrent1: 01:00, 2: 02:00 3: 03:00 4: 04:00 5: 05:00 6: 06:00 7: 07:00 8: 08:00 9: 09:00 10: 10:00 11: 11:00 12: 12:00 13: 13:00 14: 14:00 15: 15:00 16: 16:00 17: 17:…
1.3.6.1.4.1.890.1.5.13.5.11.4.7.3NodedayLightSavingEndTime
1.3.6.1.4.1.890.1.5.13.5.11.4.7.3.1ScalardayLightSavingEndMonthread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.4.7.3.2ScalardayLightSavingEndWeekread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.4.7.3.3ScalardayLightSavingEndWdayread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.4.7.3.4ScalardayLightSavingEndHourread-writecurrent1: 01:00, 2: 02:00 3: 03:00 4: 04:00 5: 05:00 6: 06:00 7: 07:00 8: 08:00 9: 09:00 10: 10:00 11: 11:00 12: 12:00 13: 13:00 14: 14:00 15: 15:00 16: 16:00 17: 17:…
1.3.6.1.4.1.890.1.5.13.5.11.4.8ScalartimeServerInetAddrTyperead-writecurrentThe IP Address type.
1.3.6.1.4.1.890.1.5.13.5.11.4.9ScalartimeServerInetAddrread-writecurrentThe IP Address of Time Server.
1.3.6.1.4.1.890.1.5.13.5.11.5NodeaccessCtrl
1.3.6.1.4.1.890.1.5.13.5.11.5.1TableaccessCtrlTablenot-accessiblecurrentA table that contains information about service access control.
1.3.6.1.4.1.890.1.5.13.5.11.5.1.1RowaccessCtrlEntrynot-accessiblecurrentA list of access control entry.
1.3.6.1.4.1.890.1.5.13.5.11.5.1.1.1ColumnaccessCtrlServiceread-onlycurrentThe service type of the access control entry.
1.3.6.1.4.1.890.1.5.13.5.11.5.1.1.2ColumnaccessCtrlEnableread-writecurrentEnable/disable the service.
1.3.6.1.4.1.890.1.5.13.5.11.5.1.1.3ColumnaccessCtrlPortread-writecurrentThe port number which the service uses.
1.3.6.1.4.1.890.1.5.13.5.11.5.2TablesecuredClientTablenot-accessiblecurrentA table that contains information about secured clients.
1.3.6.1.4.1.890.1.5.13.5.11.5.2.1RowsecuredClientEntrynot-accessiblecurrentA list of secured client entry.
1.3.6.1.4.1.890.1.5.13.5.11.5.2.1.1ColumnsecuredClientIndexread-onlycurrentThe index of the entry.
1.3.6.1.4.1.890.1.5.13.5.11.5.2.1.2ColumnsecuredClientStartIpread-writecurrentThe starting IP address of the secured client set.
1.3.6.1.4.1.890.1.5.13.5.11.5.2.1.3ColumnsecuredClientEndIpread-writecurrentThe ending IP address of the secured client set.
1.3.6.1.4.1.890.1.5.13.5.11.5.2.1.4ColumnsecuredClientServiceread-writecurrentEach bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1…
1.3.6.1.4.1.890.1.5.13.5.11.5.2.1.5ColumnsecuredClientEnableread-writecurrentEnable/disable the entry.
1.3.6.1.4.1.890.1.5.13.5.11.5.3TablesecuredClientInetTablenot-accessiblecurrentA table that contains information about secured clients.
1.3.6.1.4.1.890.1.5.13.5.11.5.3.1RowsecuredClientInetEntrynot-accessiblecurrentA list of secured client inet entry.
1.3.6.1.4.1.890.1.5.13.5.11.5.3.1.1ColumnsecuredClientInetIndexread-onlycurrentThe index of the entry.
1.3.6.1.4.1.890.1.5.13.5.11.5.3.1.2ColumnsecuredClientInetAddrTyperead-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.5.3.1.3ColumnsecuredClientInetAddrread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.5.3.1.4ColumnsecuredClientInetMaskread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.5.3.1.5ColumnsecuredClientInetServiceread-writecurrentEach bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1…
1.3.6.1.4.1.890.1.5.13.5.11.5.3.1.6ColumnsecuredClientInetEnableread-writecurrentEnable/disable the entry.
1.3.6.1.4.1.890.1.5.13.5.11.6Nodesyslog
1.3.6.1.4.1.890.1.5.13.5.11.6.1ScalarsyslogEnableread-writecurrentEnable/disable syslog function.
1.3.6.1.4.1.890.1.5.13.5.11.6.2TablesyslogTablenot-accessiblecurrentA table that contains syslog configuration.
1.3.6.1.4.1.890.1.5.13.5.11.6.2.1RowsyslogEntrynot-accessiblecurrentA list of syslog entry.
1.3.6.1.4.1.890.1.5.13.5.11.6.2.1.1ColumnsyslogFacilityread-onlycurrentLog facility.
1.3.6.1.4.1.890.1.5.13.5.11.6.2.1.2ColumnsyslogServerread-writecurrentIP address of the syslog server.
1.3.6.1.4.1.890.1.5.13.5.11.6.2.1.3ColumnsyslogServerInetAddrTyperead-writecurrentThe IP Address type.
1.3.6.1.4.1.890.1.5.13.5.11.6.2.1.4ColumnsyslogServerInetAddrread-writecurrentIP address of the syslog server.
1.3.6.1.4.1.890.1.5.13.5.11.7Nodesnmp
1.3.6.1.4.1.890.1.5.13.5.11.7.1TabletrapDestTablenot-accessiblecurrentA table that contains SNMP trap destination information.
1.3.6.1.4.1.890.1.5.13.5.11.7.1.1RowtrapDestEntrynot-accessiblecurrentThe entry of SNMP trap destination table.
1.3.6.1.4.1.890.1.5.13.5.11.7.1.1.1ColumntrapDestIndexread-onlycurrentThe index of the entry.
1.3.6.1.4.1.890.1.5.13.5.11.7.1.1.2ColumntrapDestIpread-writecurrentThe IP address of the trap destination.
1.3.6.1.4.1.890.1.5.13.5.11.7.1.1.3ColumntrapDestPortread-writecurrentThe UDP port of the trap destination.
1.3.6.1.4.1.890.1.5.13.5.11.7.1.1.4ColumntrapDestSnmpVersionread-writecurrentThe SNMP protocol version to send traps.
1.3.6.1.4.1.890.1.5.13.5.11.7.1.1.5ColumntrapDestUserNameread-writecurrentThe user name for sending SNMPv3 traps.
1.3.6.1.4.1.890.1.5.13.5.11.7.1.1.6ColumntrapDestInetAddrTyperead-writecurrentThe IP Address type.
1.3.6.1.4.1.890.1.5.13.5.11.7.1.1.7ColumntrapDestInetAddrread-writecurrentThe IP address of the trap destination.
1.3.6.1.4.1.890.1.5.13.5.11.7.2ScalarsnmpGetCommunityread-writecurrentThe SNMP get community.
1.3.6.1.4.1.890.1.5.13.5.11.7.3ScalarsnmpSetCommunityread-writecurrentThe SNMP set community.
1.3.6.1.4.1.890.1.5.13.5.11.7.4ScalarsnmpTrapCommunityread-writecurrentThe SNMP trap community.
1.3.6.1.4.1.890.1.5.13.5.11.7.5TablesnmpUserTablenot-accessiblecurrentA table that contains SNMPv3 user information.
1.3.6.1.4.1.890.1.5.13.5.11.7.5.1RowsnmpUserEntrynot-accessiblecurrentAn entry of snmpUserTable.
1.3.6.1.4.1.890.1.5.13.5.11.7.5.1.1ColumnsnmpUserNameread-onlycurrentThe user name.
1.3.6.1.4.1.890.1.5.13.5.11.7.5.1.2ColumnsnmpUserSecurityLevelread-writecurrentThe level of security at which SNMP messages can be sent or with which operations are being processed.
1.3.6.1.4.1.890.1.5.13.5.11.7.5.1.3ColumnsnmpUserAuthProtocolread-writecurrentThe type of authentication protocol to be used.
1.3.6.1.4.1.890.1.5.13.5.11.7.5.1.4ColumnsnmpUserPrivProtocolread-writecurrentThe type of privacy protocol to be used.
1.3.6.1.4.1.890.1.5.13.5.11.7.6ScalarsnmpVersionread-writecurrentThe SNMP version to be used. v3v2c means that the manager can get/set by SNMPv3 and can get by SNMPv2c.
1.3.6.1.4.1.890.1.5.13.5.11.7.7ScalarsnmpCommunityProtectread-writecurrentEnable the protection of get and trap community in UI and the config file
1.3.6.1.4.1.890.1.5.13.5.11.8Nodeuser
1.3.6.1.4.1.890.1.5.13.5.11.8.5TableuserTablenot-accessiblecurrentA table that contains user information.
1.3.6.1.4.1.890.1.5.13.5.11.8.5.1RowuserEntrynot-accessiblecurrentAn entry of userTable.
1.3.6.1.4.1.890.1.5.13.5.11.8.5.1.1ColumnuserNameread-onlycurrentThe user name.
1.3.6.1.4.1.890.1.5.13.5.11.8.5.1.2ColumnuserPasswordread-createcurrentThe user password.
1.3.6.1.4.1.890.1.5.13.5.11.8.5.1.3ColumnuserPriviledgeread-createcurrentThe user privilege to decide what operation the user can and cannot do.
1.3.6.1.4.1.890.1.5.13.5.11.8.5.1.4ColumnuserRowStatusread-createcurrentThe row status used to create or delete a user.
1.3.6.1.4.1.890.1.5.13.5.11.9Nodeaaa
1.3.6.1.4.1.890.1.5.13.5.11.9.1Nodeauth
1.3.6.1.4.1.890.1.5.13.5.11.9.1.1ScalarloginMethod1read-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.1.2ScalarloginMethod2read-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.1.3ScalarloginMethod3read-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.1.4ScalarenableMethod1read-writecurrentThe first method of enable authentication. This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.11.9.1.5ScalarenableMethod2read-writecurrentThe second method of enable authentication. This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.11.9.1.6ScalarloginTryContread-writecurrentSet to '1' so that the system try next login method only when previous method is not available. Set to '2' so that the system will try next login method when p…
1.3.6.1.4.1.890.1.5.13.5.11.9.2Nodeacct
1.3.6.1.4.1.890.1.5.13.5.11.9.2.1ScalarsystemActiveread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.2.2ScalarsystemMethodread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.2.3ScalarsystemBroadcastread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.2.4ScalarexecActiveread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.2.5ScalarexecMethodread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.2.6ScalarexecModeread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.2.7ScalarexecBroadcastread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.2.8ScalarcommandsActiveread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.2.9ScalarcommandsPrivilegeread-writecurrent1~14
1.3.6.1.4.1.890.1.5.13.5.11.9.2.10ScalarcommandsBroadcastread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.2.11ScalarupdatePeriodread-writecurrent1~2147483647 minutes
1.3.6.1.4.1.890.1.5.13.5.11.9.3Noderadius
1.3.6.1.4.1.890.1.5.13.5.11.9.3.1NoderadiusAuth
1.3.6.1.4.1.890.1.5.13.5.11.9.3.1.1ScalarradiusAuthRedundantModeread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.3.1.2ScalarradiusAuthTimeoutPeriodread-writecurrent1~1000 seconds
1.3.6.1.4.1.890.1.5.13.5.11.9.3.1.3TableradiusAuthServerTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.3.1.3.1RowradiusAuthServerEntrynot-accessiblecurrentAn entry of radiusAuthServerTable.
1.3.6.1.4.1.890.1.5.13.5.11.9.3.1.3.1.1ColumnradiusAuthServerIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.3.1.3.1.2ColumnradiusAuthServerIPread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.3.1.3.1.3ColumnradiusAuthServerPortread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.3.1.3.1.4ColumnradiusAuthServerSecretread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.3.2NoderadiusAcct
1.3.6.1.4.1.890.1.5.13.5.11.9.3.2.1ScalarradiusAcctTimeoutPeriodread-writecurrent1~1000 seconds
1.3.6.1.4.1.890.1.5.13.5.11.9.3.2.2TableradiusAcctServerTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.3.2.2.1RowradiusAcctServerEntrynot-accessiblecurrentAn entry of radiusAcctServerTable.
1.3.6.1.4.1.890.1.5.13.5.11.9.3.2.2.1.1ColumnradiusAcctServerIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.3.2.2.1.2ColumnradiusAcctServerIPread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.3.2.2.1.3ColumnradiusAcctServerPortread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.3.2.2.1.4ColumnradiusAcctServerSecretread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.3.2.3ScalarradiusAcctRedundantModeread-writecurrentRedundant mode of accounting via RADIUS. This MIB object is supported by R5.06 and later versions
1.3.6.1.4.1.890.1.5.13.5.11.9.4Nodetacacsplus
1.3.6.1.4.1.890.1.5.13.5.11.9.4.1NodetacacsplusAuth
1.3.6.1.4.1.890.1.5.13.5.11.9.4.1.1ScalartacacsplusAuthRedundantModeread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.4.1.2ScalartacacsplusAuthTimeoutPeriodread-writecurrent1~1000 seconds
1.3.6.1.4.1.890.1.5.13.5.11.9.4.1.3TabletacacsplusAuthServerTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.4.1.3.1RowtacacsplusAuthServerEntrynot-accessiblecurrentAn entry of tacacsplusAuthServerTable.
1.3.6.1.4.1.890.1.5.13.5.11.9.4.1.3.1.1ColumntacscsplusAuthServerIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.4.1.3.1.2ColumntacscsplusAuthServerIPread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.4.1.3.1.3ColumntacscsplusAuthServerPortread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.4.1.3.1.4ColumntacscsplusAuthServerSecretread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.4.2NodetacacsplusAcct
1.3.6.1.4.1.890.1.5.13.5.11.9.4.2.1ScalartacacsplusAcctTimeoutPeriodread-writecurrent1~1000 seconds.
1.3.6.1.4.1.890.1.5.13.5.11.9.4.2.2TabletacacsplusAcctServerTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.4.2.2.1RowtacacsplusAcctServerEntrynot-accessiblecurrentAn entry of tacacsplusAcctServerTable.
1.3.6.1.4.1.890.1.5.13.5.11.9.4.2.2.1.1ColumntacacsplusAcctServerIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.4.2.2.1.2ColumntacacsplusAcctServerIPread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.4.2.2.1.3ColumntacacsplusAcctServerPortread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.4.2.2.1.4ColumntacacsplusAcctServerSecretread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.4.2.3ScalartacacsplusAcctRedundantModeread-writecurrentRedundant mode of accounting via TACACS+. This MIB object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.11.9.4.3NodetacacsplusAuthor
1.3.6.1.4.1.890.1.5.13.5.11.9.4.3.1ScalartacacsplusAuthorRedundantModeread-writecurrentRedundant mode of command authorization via TACACS+ This MIB Object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.11.9.4.3.2ScalartacacsplusAuthorTimeoutPeriodread-writecurrentTimeout period (second) of command authorization via TACACS+. 1~1000 seconds This MIB Object is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.11.9.4.3.3TabletacacsplusAuthorServerTablenot-accessiblecurrentThis table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.11.9.4.3.3.1RowtacacsplusAuthorServerEntrynot-accessiblecurrentAn entry of tacacsplusAuthorServerEntry. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.11.9.4.3.3.1.1ColumntacscsplusAuthorServerIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.11.9.4.3.3.1.2ColumntacscsplusAuthorServerIPread-writecurrentTACACS+ server IP for command authorization.
1.3.6.1.4.1.890.1.5.13.5.11.9.4.3.3.1.3ColumntacscsplusAuthorServerPortread-writecurrentTACACS+ server port for command authorization.
1.3.6.1.4.1.890.1.5.13.5.11.9.4.3.3.1.4ColumntacscsplusAuthorServerSecretread-writecurrentTACACS+ server secret key for command authorization.
1.3.6.1.4.1.890.1.5.13.5.11.9.5Nodeauthor
1.3.6.1.4.1.890.1.5.13.5.11.9.5.1TableauthorCmdMethodTablenot-accessiblecurrentThis table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.11.9.5.1.1RowauthorCmdMethodEntrynot-accessiblecurrentAn entry of authorCmdMethodEntry.
1.3.6.1.4.1.890.1.5.13.5.11.9.5.1.1.1ColumnauthorCmdMethodread-writecurrentMethod mode of command authorization in each privilege level.
1.3.6.1.4.1.890.1.5.13.5.11.9.5.2ScalarauthorExecread-writecurrentenable: 1. User login via Web GUI: 1.1. Tacacs+ account with privilege 14, get the privilege as 14. 1.2. Tacacs+ account with privilege lower than 14, get the …
1.3.6.1.4.1.890.1.5.13.5.11.10Nodesession
1.3.6.1.4.1.890.1.5.13.5.11.10.1ScalarsessionTimeOutread-writecurrentConfigurable Web, telnet and SSH session timeout.
1.3.6.1.4.1.890.1.5.13.5.11.10.2ScalarsessionLoginMessageread-writecurrentLogin message in 128 characters.
1.3.6.1.4.1.890.1.5.13.5.11.11Nodebootimage
1.3.6.1.4.1.890.1.5.13.5.11.11.1ScalarsysBootImageread-writecurrentBoot from the first image or the second image.
1.3.6.1.4.1.890.1.5.13.5.11.12NodekeepAlive
1.3.6.1.4.1.890.1.5.13.5.11.12.1ScalarkeepAliveEnableread-writecurrentEnable/Diable keep-alive.
1.3.6.1.4.1.890.1.5.13.5.11.12.2ScalarkeepAlivePeriodread-writecurrentThe period for polling the defualt gateway.
1.3.6.1.4.1.890.1.5.13.5.12Nodetrap
1.3.6.1.4.1.890.1.5.13.5.12.1Nodeobject
1.3.6.1.4.1.890.1.5.13.5.12.1.1Scalareqpt48VPowerIndexread-onlycurrentThe index of DC 48V power supply.
1.3.6.1.4.1.890.1.5.13.5.12.1.2ScalareqptAlarmInputIndexread-onlycurrentThe index of alarm input.
1.3.6.1.4.1.890.1.5.13.5.12.1.3ScalareqptDslDeviceIndexread-onlycurrentThe index of DSL device.
1.3.6.1.4.1.890.1.5.13.5.12.1.4ScalareqptShdslSubDeviceIndexread-onlycurrentThe sub-device index of SHDSL device.
1.3.6.1.4.1.890.1.5.13.5.12.1.5ScalarsysUserread-onlycurrentThe user capable of administering this NE with different priority level.
1.3.6.1.4.1.890.1.5.13.5.12.1.6ScalarsysAccessPointread-onlycurrentThe access point to this NE.
1.3.6.1.4.1.890.1.5.13.5.12.1.7ScalarsysAccessPointIndexread-onlycurrentThe access point index to this NE.
1.3.6.1.4.1.890.1.5.13.5.12.1.8ScalarsysUserLoginIpread-onlycurrentThe IP address from which the user login.
1.3.6.1.4.1.890.1.5.13.5.12.1.9ScalareqptLTResetSourceread-onlycurrentThe source that triggers LT reset.
1.3.6.1.4.1.890.1.5.13.5.12.1.10ScalarsysProfSyncIpAddressread-onlycurrentThe server IP address to be synchronized or the client IP address to synchronize.
1.3.6.1.4.1.890.1.5.13.5.12.1.11ScalarsysMacAntiSpoofOrigread-onlycurrentThe original port of Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.13.5.12.1.12ScalarsysMacAntiSpoofNewread-onlycurrentThe new port of Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.13.5.12.1.13ScalarsysMacAntiSpoofMacread-onlycurrentThe mac address of Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.13.5.12.1.14ScalarintfCfmCcmErrorCauseread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.12.1.15Scalare1AlarmStatusread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.12.1.16Scalare1AlarmCurrentValueread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.12.1.17Scalare1AlarmThresholdread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.12.1.18ScalardslMacAntiSpoofOrigread-onlycurrentThe original port of xDSL Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.13.5.12.1.19ScalardslMacAntiSpoofMacread-onlycurrentThe mac address of xDSL Mac-AntiSpoofing.
1.3.6.1.4.1.890.1.5.13.5.12.1.20ScalarvopTermPhoneStateread-onlycurrentPhone Status
1.3.6.1.4.1.890.1.5.13.5.12.1.21ScalarvopRingTimerSegmentread-onlycurrentRing Timer Segment ID
1.3.6.1.4.1.890.1.5.13.5.12.1.22ScalarvopRingTimerIdread-onlycurrentRing Timer ID
1.3.6.1.4.1.890.1.5.13.5.12.1.23ScalarvopDscCodecTyperead-onlycurrentCodec Type
1.3.6.1.4.1.890.1.5.13.5.12.1.24ScalarvopMcMediaIdread-onlycurrentMedia Card ID
1.3.6.1.4.1.890.1.5.13.5.12.1.25ScalarvopMcPortread-onlycurrentport number
1.3.6.1.4.1.890.1.5.13.5.12.1.26ScalarvopDropCallTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.12.1.27ScalarsysUserLoginInetAddrTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.12.1.28ScalarsysUserLoginInetAddrread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.12.1.29ScalarvopDeviceIdread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.12.1.30ScalarvopBatteryNumread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.12.1.31ScalarvopRingerShortCountread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.12.1.32ScalarvopMgcIPread-onlycurrentThe IP address of Mgc.
1.3.6.1.4.1.890.1.5.13.5.12.1.33ScalareqptSptMstiInstanceIdread-onlycurrentspanning tree msti instance number.
1.3.6.1.4.1.890.1.5.13.5.12.1.34ScalareqptSptPortStateOrigread-onlycurrentThe original port state of spanning tree .
1.3.6.1.4.1.890.1.5.13.5.12.1.35ScalareqptSptPortStateNewread-onlycurrentThe new port state of spanning tree.
1.3.6.1.4.1.890.1.5.13.5.12.1.36ScalareqptSptPortRoleOrigread-onlycurrentThe original port role of spanning tree.
1.3.6.1.4.1.890.1.5.13.5.12.1.37ScalareqptSptPortRoleNewread-onlycurrentThe new port role of spanning tree.
1.3.6.1.4.1.890.1.5.13.5.12.2Nodedsl
1.3.6.1.4.1.890.1.5.13.5.12.2.1NotificationdslLineEnablecurrentThe line is enabled by administrator.
1.3.6.1.4.1.890.1.5.13.5.12.2.2NotificationdslLineDisablecurrentThe line is disabled by administrator.
1.3.6.1.4.1.890.1.5.13.5.12.2.3NotificationdslLineBelowPlannedRatecurrentThe payload rate is below planned rate.
1.3.6.1.4.1.890.1.5.13.5.12.2.4NotificationdslLineLdmStartcurrentThe line enters loop diagnosis mode.
1.3.6.1.4.1.890.1.5.13.5.12.2.5NotificationdslLineLdmDonecurrentThe line exits loop diagnosis mode.
1.3.6.1.4.1.890.1.5.13.5.12.2.6NotificationdslLinePowerDownL2currentThe line enters power down L2 mode.
1.3.6.1.4.1.890.1.5.13.5.12.2.7NotificationdslLinePowerDownL0currentThe line enters power down L0 mode.
1.3.6.1.4.1.890.1.5.13.5.12.2.8NotificationdslLineFailurecurrentThe line is failed.
1.3.6.1.4.1.890.1.5.13.5.12.2.9NotificationdslLineEnterTestcurrentThe line enters testing mode.
1.3.6.1.4.1.890.1.5.13.5.12.2.10NotificationdslLineExitTestcurrentThe line exits testing mode.
1.3.6.1.4.1.890.1.5.13.5.12.2.12NotificationdslLineVdslRateChangecurrentThis notification indicates VDSL link rate change.
1.3.6.1.4.1.890.1.5.13.5.12.2.13NotificationdslLoopGuardcurrentLoop guard is traggered.
1.3.6.1.4.1.890.1.5.13.5.12.2.14NotificationdslMacAntiSpoofcurrentxDsl MAC spoofing is traggered.
1.3.6.1.4.1.890.1.5.13.5.12.2.15NotificationdslLineVturInfoReadycurrentThe vtur info is ready.
1.3.6.1.4.1.890.1.5.13.5.12.2.16NotificationdslLineVturLprcurrentCPE is down.
1.3.6.1.4.1.890.1.5.13.5.12.3Nodeequipment
1.3.6.1.4.1.890.1.5.13.5.12.3.1Notificationeqpt48VPowerFailurecurrentThe power supply of DC 48V is failed.
1.3.6.1.4.1.890.1.5.13.5.12.3.2Notificationeqpt48VPowerNormalcurrentThe power supply of DC 48V is normal.
1.3.6.1.4.1.890.1.5.13.5.12.3.3NotificationeqptVoltageErrorcurrentThe voltage is abnormal.
1.3.6.1.4.1.890.1.5.13.5.12.3.4NotificationeqptVoltageNormalcurrentThe voltage is normal.
1.3.6.1.4.1.890.1.5.13.5.12.3.5NotificationeqptTempErrorcurrentThe temperature is abnormal.
1.3.6.1.4.1.890.1.5.13.5.12.3.6NotificationeqptTempNormalcurrentThe temperature is normal.
1.3.6.1.4.1.890.1.5.13.5.12.3.7NotificationeqptFanErrorcurrentThe fan RPM is abnormal.
1.3.6.1.4.1.890.1.5.13.5.12.3.8NotificationeqptFanNormalcurrentThe fan RPM is normal.
1.3.6.1.4.1.890.1.5.13.5.12.3.9NotificationeqptTempLowFanStopcurrentThe fan is stopped due to low temperature.
1.3.6.1.4.1.890.1.5.13.5.12.3.10NotificationeqptHWMonitorFailurecurrentHardware monitor diagnosis is failed.
1.3.6.1.4.1.890.1.5.13.5.12.3.11NotificationeqptExternalAlarmInputcurrentExternal alarm input.
1.3.6.1.4.1.890.1.5.13.5.12.3.12NotificationeqptTopologyChangecurrentThe change of spanning tree topology is detected.
1.3.6.1.4.1.890.1.5.13.5.12.3.13NotificationeqptFWUploadOKcurrentUploading firmware is completed.
1.3.6.1.4.1.890.1.5.13.5.12.3.14NotificationeqptFWUploadFailurecurrentUploading firmware is failed.
1.3.6.1.4.1.890.1.5.13.5.12.3.15NotificationeqptLTPlugIncurrentLT is plugged in.
1.3.6.1.4.1.890.1.5.13.5.12.3.16NotificationeqptLTPullOutcurrentLT is pulled out.
1.3.6.1.4.1.890.1.5.13.5.12.3.17NotificationeqptLTActivecurrentLT is active.
1.3.6.1.4.1.890.1.5.13.5.12.3.18NotificationeqptLTInactivecurrentLT is inactive.
1.3.6.1.4.1.890.1.5.13.5.12.3.19NotificationeqptLTFWUploadOKcurrentUploading firmware to LT is completed.
1.3.6.1.4.1.890.1.5.13.5.12.3.20NotificationeqptLTFWUploadFailurecurrentUploading firmware to LT is failed.
1.3.6.1.4.1.890.1.5.13.5.12.3.21NotificationeqptLTDslDeviceFailurecurrentLT DSL device is failed.
1.3.6.1.4.1.890.1.5.13.5.12.3.22NotificationeqptLTDslDeviceRedownloadcurrentThe firmware of LT DSL device is re-downloaded.
1.3.6.1.4.1.890.1.5.13.5.12.3.23NotificationeqptLTShdslDeviceRedownloadcurrentThe firmware of LT DSL device is re-downloaded.
1.3.6.1.4.1.890.1.5.13.5.12.3.24NotificationeqptLTEnablecurrentLT is enabled.
1.3.6.1.4.1.890.1.5.13.5.12.3.25NotificationeqptLTDisablecurrentLT is disabled.
1.3.6.1.4.1.890.1.5.13.5.12.3.26NotificationeqptLTResetcurrentLT is reset.
1.3.6.1.4.1.890.1.5.13.5.12.3.27NotificationeqptExternalAlarmInputReleasecurrentExternal alarm input is released.
1.3.6.1.4.1.890.1.5.13.5.12.3.28NotificationeqptNTSwitchOKcurrentThe trap signifies that MSC card is switched over successfully. The value of slotId is the slot ID of the current working MSC.
1.3.6.1.4.1.890.1.5.13.5.12.3.29NotificationeqptCpuUtilizationHighcurrentThe CPU utilization is over its high threshold.
1.3.6.1.4.1.890.1.5.13.5.12.3.30NotificationeqptCpuUtilizationNormalcurrentThe CPU utilization is normal.
1.3.6.1.4.1.890.1.5.13.5.12.3.31NotificationeqptPacketBufferUsageHighcurrentThe packet buffer usage is over its high threshold.
1.3.6.1.4.1.890.1.5.13.5.12.3.32NotificationeqptPacketBufferUsageNormalcurrentThe packet buffer usage is normal.
1.3.6.1.4.1.890.1.5.13.5.12.3.33NotificationeqptMemoryUsageHighcurrentThe memory usage is over its high threshold.
1.3.6.1.4.1.890.1.5.13.5.12.3.34NotificationeqptMemoryUsageNormalcurrentThe memory usage is normal.
1.3.6.1.4.1.890.1.5.13.5.12.3.35NotificationeqptDbInactivecurrentThe control card daughter board is inactive.
1.3.6.1.4.1.890.1.5.13.5.12.3.36NotificationeqptDbNormalcurrentThe control card daughter board is normal.
1.3.6.1.4.1.890.1.5.13.5.12.3.37NotificationeqptDbResetcurrentThe control card daughter board is reset.
1.3.6.1.4.1.890.1.5.13.5.12.3.38NotificationeqptSptPortStateChangecurrentThe spanning tree msti port state change.
1.3.6.1.4.1.890.1.5.13.5.12.3.39NotificationeqptSptPortRoleChangecurrentThe spanning tree msti port role change.
1.3.6.1.4.1.890.1.5.13.5.12.4Nodesystrap
1.3.6.1.4.1.890.1.5.13.5.12.4.1NotificationsysRebootcurrentSystem reboot.
1.3.6.1.4.1.890.1.5.13.5.12.4.2NotificationsysConfigChangecurrentSystem configuration is changed.
1.3.6.1.4.1.890.1.5.13.5.12.4.3NotificationsysConfigUploadOKcurrentUploading system configuration is completed.
1.3.6.1.4.1.890.1.5.13.5.12.4.4NotificationsysConfigUploadFailurecurrentUploading system configuration is failed.
1.3.6.1.4.1.890.1.5.13.5.12.4.5NotificationsysTimeSyncFailurecurrentSynchronizing time with the time server is failed.
1.3.6.1.4.1.890.1.5.13.5.12.4.6NotificationsysAlarmCutoffEnablecurrentAlarm cutoff is activated.
1.3.6.1.4.1.890.1.5.13.5.12.4.7NotificationsysAlarmClearEnablecurrentAlarm clear is activated.
1.3.6.1.4.1.890.1.5.13.5.12.4.8NotificationsysLoginFailurecurrentUser login is failed.
1.3.6.1.4.1.890.1.5.13.5.12.4.9NotificationsysLogincurrentUser logins.
1.3.6.1.4.1.890.1.5.13.5.12.4.10NotificationsysUserAddedcurrentUser added.
1.3.6.1.4.1.890.1.5.13.5.12.4.11NotificationsysUserDeletedcurrentUser deleted.
1.3.6.1.4.1.890.1.5.13.5.12.4.12NotificationsysUserModifiedcurrentUser modified.
1.3.6.1.4.1.890.1.5.13.5.12.4.13NotificationsysSvrSyncProfOKcurrentServer synchronize profiles successfully.
1.3.6.1.4.1.890.1.5.13.5.12.4.14NotificationsysSvrSyncProfFailcurrentServer failed to synchronize profiles to a client.
1.3.6.1.4.1.890.1.5.13.5.12.4.15NotificationsysCliSyncProfOKcurrentClient synchronize profiles from server successfully.
1.3.6.1.4.1.890.1.5.13.5.12.4.16NotificationsysCliSyncProfFailcurrentClient failed to synchronize profiles from server.
1.3.6.1.4.1.890.1.5.13.5.12.4.17NotificationsysMacAntiSpoofingcurrentMAC Anti-spoofing.
1.3.6.1.4.1.890.1.5.13.5.12.4.18NotificationsysClusterMemberAddcurrentCluster member is added.
1.3.6.1.4.1.890.1.5.13.5.12.4.19NotificationsysClusterMemberDeletecurrentCluster member is deleted.
1.3.6.1.4.1.890.1.5.13.5.12.4.20NotificationsysClusterMemberActivecurrentCluster member is active.
1.3.6.1.4.1.890.1.5.13.5.12.4.21NotificationsysClusterMemberInactivecurrentCluster member is inactive.
1.3.6.1.4.1.890.1.5.13.5.12.4.22NotificationsysLoginInetcurrentUser logins.
1.3.6.1.4.1.890.1.5.13.5.12.4.23NotificationsysLoginFailureInetcurrentUser login is failed.
1.3.6.1.4.1.890.1.5.13.5.12.5Nodeenet
1.3.6.1.4.1.890.1.5.13.5.12.5.1NotificationenetEnablecurrentGigabit Ethernet interface is enabled.
1.3.6.1.4.1.890.1.5.13.5.12.5.2NotificationenetDisablecurrentGigabit Ethernet interface is disabled.
1.3.6.1.4.1.890.1.5.13.5.12.5.3NotificationenetLoopGuardcurrentLoop guard is traggered.
1.3.6.1.4.1.890.1.5.13.5.12.5.4NotificationenetSfpErrorcurrentSFP DDMI parameters out of range.
1.3.6.1.4.1.890.1.5.13.5.12.5.5NotificationenetSfpNormalcurrentSFP DDMI parameters back to range.
1.3.6.1.4.1.890.1.5.13.5.12.5.6NotificationenetSfpTxEnablecurrentSFP TX power is enabled.
1.3.6.1.4.1.890.1.5.13.5.12.5.7NotificationenetSfpTxDisablecurrentSFP TX power is disabled.
1.3.6.1.4.1.890.1.5.13.5.12.6Nodeinterface
1.3.6.1.4.1.890.1.5.13.5.12.6.1NotificationcfmCcmErrorcurrent
1.3.6.1.4.1.890.1.5.13.5.12.6.2NotificationmacCountcurrent
1.3.6.1.4.1.890.1.5.13.5.12.7Nodetdm
1.3.6.1.4.1.890.1.5.13.5.12.7.1Notificatione1AlarmLinkLOScurrent
1.3.6.1.4.1.890.1.5.13.5.12.7.2Notificatione1AlarmPathLOFcurrent
1.3.6.1.4.1.890.1.5.13.5.12.7.3Notificatione1AlarmPathAIScurrent
1.3.6.1.4.1.890.1.5.13.5.12.7.4Notificatione1AlarmPathRDIcurrent
1.3.6.1.4.1.890.1.5.13.5.12.7.5Notificatione1AlarmPathOCASMFcurrent
1.3.6.1.4.1.890.1.5.13.5.12.7.6Notificatione1AlarmPathOCRCMFcurrent
1.3.6.1.4.1.890.1.5.13.5.12.7.7Notificatione1AlarmLinkSFcurrent
1.3.6.1.4.1.890.1.5.13.5.12.7.8Notificatione1AlarmLinkSDcurrent
1.3.6.1.4.1.890.1.5.13.5.12.7.9Notificatione1AlarmTCAQuarterEScurrent
1.3.6.1.4.1.890.1.5.13.5.12.7.10Notificatione1AlarmTCAQuarterSEScurrent
1.3.6.1.4.1.890.1.5.13.5.12.7.11Notificatione1AlarmTCAQuarterUAScurrent
1.3.6.1.4.1.890.1.5.13.5.12.7.12Notificatione1AlarmTCADayEScurrent
1.3.6.1.4.1.890.1.5.13.5.12.7.13Notificatione1AlarmTCADaySEScurrent
1.3.6.1.4.1.890.1.5.13.5.12.7.14Notificatione1AlarmTCADayUAScurrent
1.3.6.1.4.1.890.1.5.13.5.12.8Nodevoiptrap
1.3.6.1.4.1.890.1.5.13.5.12.8.1NotificationvopTempErrorcurrenttemperature out of low or high threshold
1.3.6.1.4.1.890.1.5.13.5.12.8.2NotificationvopTempNormalcurrenttemperature normal
1.3.6.1.4.1.890.1.5.13.5.12.8.3NotificationvopDCFailcurrentDC power feed got problem
1.3.6.1.4.1.890.1.5.13.5.12.8.4NotificationvopDCNormalcurrentDC power feed normal
1.3.6.1.4.1.890.1.5.13.5.12.8.5NotificationvopACFailcurrentAC power feed got problem
1.3.6.1.4.1.890.1.5.13.5.12.8.6NotificationvopACNormalcurrentAC power feed normal
1.3.6.1.4.1.890.1.5.13.5.12.8.7NotificationvopRingTimercurrentRinger timer got problem
1.3.6.1.4.1.890.1.5.13.5.12.8.8NotificationvopRingResourcecurrentRinger electrical load exceed REN (Ring Equivalent number)
1.3.6.1.4.1.890.1.5.13.5.12.8.9NotificationvopRingOverHeadcurrentHigh load indication of RI (Ring Indicator, control signal from modem to computer, indicate phone line is ringing)
1.3.6.1.4.1.890.1.5.13.5.12.8.10NotificationvopNoFreeDSPChannelcurrentDSP resource is not enough for voice processing
1.3.6.1.4.1.890.1.5.13.5.12.8.11NotificationvopMCMissingcurrentSignal Card detects Media Card missing
1.3.6.1.4.1.890.1.5.13.5.12.8.12NotificationvopSCMissingcurrentMedia Card detects Signaling Card missing
1.3.6.1.4.1.890.1.5.13.5.12.8.13NotificationvopTermNameDupcurrentDuplicate termination name used
1.3.6.1.4.1.890.1.5.13.5.12.8.14NotificationvopNoProtectioncurrentCan not find protection card on specified slot
1.3.6.1.4.1.890.1.5.13.5.12.8.15NotificationvopProtectionSwitchcurrentSignal Card protection switch happened
1.3.6.1.4.1.890.1.5.13.5.12.8.16NotificationvopDropCallcurrentPhone call exceed short / long term limit
1.3.6.1.4.1.890.1.5.13.5.12.8.17NotificationvopBatteryFailcurrentCODEC/SLIC module report Battery power failed
1.3.6.1.4.1.890.1.5.13.5.12.8.18NotificationvopBatteryNormalcurrentCODEC/SLIC module report Battery power normal
1.3.6.1.4.1.890.1.5.13.5.12.8.19NotificationvopClockFailcurrentVCP chip CLOCK failed or missing
1.3.6.1.4.1.890.1.5.13.5.12.8.20NotificationvopClockNormalcurrentVCP chip CLOCK normal
1.3.6.1.4.1.890.1.5.13.5.12.8.21NotificationvopRingerFailcurrentCODEC/SLIC module external ringer does not work
1.3.6.1.4.1.890.1.5.13.5.12.8.22NotificationvopRingerNormalcurrentCODEC/SLIC module external ringer work normal
1.3.6.1.4.1.890.1.5.13.5.12.8.23NotificationvopMgcMissingcurrentIndicate the state of mgc. Missing trap will be issue when mg had registered to mgc, and disconnected happened.
1.3.6.1.4.1.890.1.5.13.5.12.8.24NotificationvopMgcNormalcurrentIndicate the state of mgc. Normal trap will be issue when missing trap is not clear and mg registered to mgc again.
1.3.6.1.4.1.890.1.5.13.5.12.8.25NotificationvopMgEnablecurrentIndicate the state of mg. Mg enable trap will be issued when user enable the mg in manual.
1.3.6.1.4.1.890.1.5.13.5.12.8.26NotificationvopMgDisablecurrentIndicate the state of mg. Mg disable trap will be issued when user disable the mg in manual.
1.3.6.1.4.1.890.1.5.13.5.12.8.27NotificationvopPortMissingcurrentnone.
1.3.6.1.4.1.890.1.5.13.5.12.8.28NotificationvopPortNormalcurrentnone.
1.3.6.1.4.1.890.1.5.13.5.12.8.29NotificationvopMcNormalcurrentMC is normal.
1.3.6.1.4.1.890.1.5.13.5.12.8.30NotificationvopScNormalcurrentSC is normal.
1.3.6.1.4.1.890.1.5.13.5.12.8.31NotificationvopScBulkSyncReadycurrentSC bulk sync completed.
1.3.6.1.4.1.890.1.5.13.5.12.8.32NotificationvopProtectionReadycurrentSC redundancy is ready.
1.3.6.1.4.1.890.1.5.13.5.13Nodestatistics
1.3.6.1.4.1.890.1.5.13.5.13.1NodedhcpStats
1.3.6.1.4.1.890.1.5.13.5.13.1.1TabledhcpSnoopIpTablenot-accessiblecurrentThis table shows the IP addresses and netmasks offered by the DHCP server. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.1.1.1RowdhcpSnoopIpEntrynot-accessiblecurrentAn entry of dhcpSnoopIpTable.
1.3.6.1.4.1.890.1.5.13.5.13.1.1.1.1ColumndhcpSnoopIpread-onlycurrentThe snooped IP address.
1.3.6.1.4.1.890.1.5.13.5.13.1.1.1.2ColumndhcpSnoopMacread-onlycurrentThe snooped MAC address.
1.3.6.1.4.1.890.1.5.13.5.13.1.1.1.3ColumndhcpSnoopVidread-onlycurrentThe snooped VLAN ID.
1.3.6.1.4.1.890.1.5.13.5.13.1.2TabledhcpSnoopCounterTablenot-accessiblecurrentThis table shows the DHCP statistics. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1RowdhcpSnoopCounterEntrynot-accessiblecurrentAn entry of dhcpSnoopCounterTable.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.1ColumndhcpDiscoveryread-onlycurrentThe total number of received DHCP server discovery packets.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.2ColumndhcpOfferread-onlycurrentThe total number of received DHCP server offer packets.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.3ColumndhcpRequestread-onlycurrentThe total number of received DHCP IP request packets.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.4ColumndhcpAckread-onlycurrentThe total number of received DHCP IP acknowledge packets.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.5ColumndhcpAckBySnoopFullread-onlycurrentThe total number of received DHCP IP acknowledge packets that replace the oldest snooping entry in snooping table due to table full.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.6Columndhcpv6Solicitread-onlycurrentThe total number of received DHCPv6 solicit packets.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.7Columndhcpv6Advertiseread-onlycurrentThe total number of received DHCPv6 advertise packets.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.8Columndhcpv6Requestread-onlycurrentThe total number of received DHCPv6 request packets.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.9Columndhcpv6Replyread-onlycurrentThe total number of received DHCPv6 reply packets.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.10Columndhcpv6Renewread-onlycurrentThe total number of received DHCPv6 renew packets.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.11Columndhcpv6Rebindread-onlycurrentThe total number of received DHCPv6 rebind packets.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.12Columndhcpv6Releaseread-onlycurrentThe total number of received DHCPv6 release packets.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.13Columndhcpv6RelayFwdread-onlycurrentThe total number of received DHCPv6 relay-forward packets.
1.3.6.1.4.1.890.1.5.13.5.13.1.2.1.14Columndhcpv6RelayReplyread-onlycurrentThe total number of received DHCPv6 relay-reply packets.
1.3.6.1.4.1.890.1.5.13.5.13.1.3Tabledhcpv6SnoopIpTablenot-accessiblecurrentThis table shows LDRA statistics.
1.3.6.1.4.1.890.1.5.13.5.13.1.3.1Rowdhcpv6SnoopIpEntrynot-accessiblecurrentAn entry of dhcpv6SnoopIpTable.
1.3.6.1.4.1.890.1.5.13.5.13.1.3.1.1Columndhcpv6SnoopInetAddrTyperead-onlycurrentThe snooped IP address type.
1.3.6.1.4.1.890.1.5.13.5.13.1.3.1.2Columndhcpv6SnoopInetAddrread-onlycurrentThe snooped IP address.
1.3.6.1.4.1.890.1.5.13.5.13.1.3.1.3Columndhcpv6SnoopMacread-onlycurrentThe snooped MAC address.
1.3.6.1.4.1.890.1.5.13.5.13.1.3.1.4Columndhcpv6SnoopVidread-onlycurrentThe snooped VLAN ID.
1.3.6.1.4.1.890.1.5.13.5.13.2NodeigmpStats
1.3.6.1.4.1.890.1.5.13.5.13.2.1ScalarigmpQueryCntTotalread-onlycurrentThe total number of IGMP query messages received. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.2ScalarigmpReportCntTotalread-onlycurrentThe total number of IGMP report messages received. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.3ScalarigmpLeaveCntTotalread-onlycurrentThe total number of IGMP leave messages received. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.4ScalarigmpNumOfActiveGroupsread-onlycurrentThe total number of IGMP learned groups. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.5TableigmpGroupTablenot-accessiblecurrentA table that displays IGMP learned group member information. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.5.1RowigmpGroupEntrynot-accessiblecurrentAn entry of igmpGroupTable.
1.3.6.1.4.1.890.1.5.13.5.13.2.5.1.1ColumnigmpGroupVidread-onlycurrentThe IGMP group VLAN ID.
1.3.6.1.4.1.890.1.5.13.5.13.2.5.1.2ColumnigmpGroupIpread-onlycurrentThe multicast IP address.
1.3.6.1.4.1.890.1.5.13.5.13.2.5.1.3ColumnigmpGroupNumOfMembersread-onlycurrentThe number of member ports in the group.
1.3.6.1.4.1.890.1.5.13.5.13.2.5.1.4ColumnigmpGroupMemberPortsread-onlycurrentThe member port list of the group.
1.3.6.1.4.1.890.1.5.13.5.13.2.6TableigmpGroupPortTablenot-accessiblecurrentA table that displays IGMP joined groups in this port. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.6.1RowigmpGroupPortEntrynot-accessiblecurrentAn entry of igmpGroupPortTable.
1.3.6.1.4.1.890.1.5.13.5.13.2.6.1.1ColumnigmpGroupPortVidread-onlycurrentThe IGMP group VLAN ID.
1.3.6.1.4.1.890.1.5.13.5.13.2.6.1.2ColumnigmpGroupPortIpread-onlycurrentThe multicast IP address.
1.3.6.1.4.1.890.1.5.13.5.13.2.6.1.3ColumnigmpGroupPortSourceIpread-onlycurrentThe source IP address that joins the IGMP group.
1.3.6.1.4.1.890.1.5.13.5.13.2.7TableigmpPortCtrlPduTablenot-accessiblecurrentA table that displays IGMP related counter values in this port. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.7.1RowigmpPortCtrlPduEntrynot-accessiblecurrentAn entry of igmpPortCtrlPduTable.
1.3.6.1.4.1.890.1.5.13.5.13.2.7.1.1ColumnigmpPortCtrlPduQueryCntread-onlycurrentThe total number of IGMP query messages received in this port.
1.3.6.1.4.1.890.1.5.13.5.13.2.7.1.2ColumnigmpPortCtrlPduReportCntread-onlycurrentThe total number of IGMP report messages received in this port.
1.3.6.1.4.1.890.1.5.13.5.13.2.7.1.3ColumnigmpPortCtrlPduLeaveCntread-onlycurrentThe total number of IGMP leave messages received in this port.
1.3.6.1.4.1.890.1.5.13.5.13.2.7.1.4ColumnigmpPortNumOfActiveGroupsread-onlycurrentThe total number of active IGMP groups in this port.
1.3.6.1.4.1.890.1.5.13.5.13.2.7.1.5ColumnigmpPortCtrlPduV2SuccessJoinCntread-onlycurrentThe total number of IGMP V2 success joins in this port. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.7.1.6ColumnigmpPortCtrlPduV2UnsuccJoinCntread-onlycurrentThe total number of IGMP V2 unsuccess joins in this port. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.7.1.7ColumnigmpPortCtrlPduGenQryCntread-onlycurrentThe total number of IGMP general queries in this port. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.7.1.8ColumnigmpPortCtrlPduSpecQryCntread-onlycurrentThe total number of IGMP specific queries in this port. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.7.1.9ColumnigmpPortCtrlPduV3SuccessReportCntread-onlycurrentThe total number of IGMP V3 success joins in this port. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.7.1.10ColumnigmpPortCtrlPduV3UnsuccReportCntread-onlycurrentThe total number of IGMP V3 unsuccess joins in this port. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.7.1.11ColumnigmpPortCtrlPduInvalidCntread-onlycurrentThe total number of IGMP invalid in this port. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.8TableigmpVlanStatsTablenot-accessiblecurrentA table that displays IGMP related counter values per VLAN.
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1RowigmpVlanStatsEntrynot-accessiblecurrentAn entry of igmpVlanStatsTable.
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1.1ColumnigmpVlanStatsVlanIndexread-onlycurrentVLAN ID.
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1.2ColumnigmpVlanStatsQueryCntread-onlycurrentThe total number of IGMP query messages received in this VLAN.
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1.3ColumnigmpVlanStatsReportCntread-onlycurrentThe total number of IGMP report messages received in this VLAN.
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1.4ColumnigmpVlanStatsLeaveCntread-onlycurrentThe total number of IGMP leave messages received in this VLAN.
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1.5ColumnigmpVlanStatsNumOfActiveGroupsread-onlycurrentThe total number of active IGMP groups in this VLAN.
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1.6ColumnigmpVlanStatsQueryPortread-onlycurrentThe received Port of IGMP Router
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1.7ColumnigmpVlanStatsQuerierIpread-onlycurrentThe IP address of IGMP Router
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1.8ColumnigmpVlanStatsUnsuccessReportCntread-onlycurrentTotal number of successful joins from users. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1.9ColumnigmpVlanStatsSuccessReportCntread-onlycurrentTotal number of unsuccessful joins from users. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1.10ColumnigmpVlanStatsGeneralQueryInCntread-onlycurrentTotal number of general queries sent to users. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1.11ColumnigmpVlanStatsGeneralQueryOutCntread-onlycurrentTotal number of general queries received from network. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1.12ColumnigmpVlanStatsSpecificQueryInCntread-onlycurrentTotal number of specific queries sent to users. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.8.1.13ColumnigmpVlanStatsSpecificQueryOutCntread-onlycurrentTotal number of specific queries received from network. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.2.9ScalarigmpQueryOutCntread-onlycurrentThe total number of IGMP query messages transmitted.
1.3.6.1.4.1.890.1.5.13.5.13.2.10ScalarigmpReportOutCntread-onlycurrentThe total number of IGMP report messages transmitted.
1.3.6.1.4.1.890.1.5.13.5.13.2.11ScalarigmpLeaveOutCntread-onlycurrentThe total number of IGMP leave messages transmitted.
1.3.6.1.4.1.890.1.5.13.5.13.2.12ScalarigmpQueryDropCntread-onlycurrentThe total number of IGMP query messages dropped.
1.3.6.1.4.1.890.1.5.13.5.13.2.13ScalarigmpReportDropCntread-onlycurrentThe total number of IGMP report messages dropped.
1.3.6.1.4.1.890.1.5.13.5.13.2.14ScalarigmpLeaveDropCntread-onlycurrentThe total number of IGMP leave messages dropped.
1.3.6.1.4.1.890.1.5.13.5.13.3NodemacStats
1.3.6.1.4.1.890.1.5.13.5.13.3.1ScalarmacDisplayTargetread-writecurrentThis managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. Ifindex is used to specify a specific interf…
1.3.6.1.4.1.890.1.5.13.5.13.3.2TablemacTablenot-accessiblecurrentA table that contains information about unicast entries for which the bridge has forwarding and/or filtering information. This information is used by the trans…
1.3.6.1.4.1.890.1.5.13.5.13.3.2.1RowmacEntrynot-accessiblecurrentAn entry of macTable.
1.3.6.1.4.1.890.1.5.13.5.13.3.2.1.1ColumnmacAddressread-onlycurrentA unicast MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.890.1.5.13.5.13.3.2.1.2ColumnmacPortread-onlycurrentThe port from which the mac address has been learned.
1.3.6.1.4.1.890.1.5.13.5.13.3.2.1.3ColumnmacStatusread-onlycurrentThe status of this entry.
1.3.6.1.4.1.890.1.5.13.5.13.3.3ScalarmacFlushread-writecurrentSet the object to 1 to flush mac table.
1.3.6.1.4.1.890.1.5.13.5.13.4NodeadslStats
1.3.6.1.4.1.890.1.5.13.5.13.4.1ScalaradslLineStatsAtucNumOfSubcarriersPerPortread-onlycurrentThe number of subcarriers per port for ATU-C.
1.3.6.1.4.1.890.1.5.13.5.13.4.2ScalaradslLineStatsAturNumOfSubcarriersPerPortread-onlycurrentThe number of subcarriers per port for ATU-R.
1.3.6.1.4.1.890.1.5.13.5.13.4.3TableadslLineStatsTablenot-accessiblecurrentThe table displays ADSL line subcarrier status. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1RowadslLineStatsEntrynot-accessiblecurrentAn entry of adslLineStatsTable.
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.1ColumnadslLineStatsAtucHlog1read-onlycurrentThe object provides Hlog for the ATU-C first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no mea…
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.2ColumnadslLineStatsAtucHlog2read-onlycurrentThe object provides Hlog for the ATU-C last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no meas…
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.3ColumnadslLineStatsAturHlogread-onlycurrentThe object provides Hlog for the ATU-R subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement c…
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.4ColumnadslLineStatsAtucQln1read-onlycurrentThe object provides QLN for the ATU-C first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measureme…
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.5ColumnadslLineStatsAtucQln2read-onlycurrentThe object provides QLN for the ATU-C last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measuremen…
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.6ColumnadslLineStatsAturQlnread-onlycurrentThe object provides QLN for the ATU-R subcarriers. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measurement could b…
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.7ColumnadslLineStatsAtucTssi1read-onlycurrentThe object provides TSSI for the ATU-C first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.8ColumnadslLineStatsAtucTssi2read-onlycurrentThe object provides TSSI for the ATU-C last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.9ColumnadslLineStatsAturTssiread-onlycurrentThe object provides TSSI for the ATU-R subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.10ColumnadslLineStatsAtucGain1read-onlycurrentThe object provides GAIN for the ATU-C first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.11ColumnadslLineStatsAtucGain2read-onlycurrentThe object provides GAIN for the ATU-C last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.12ColumnadslLineStatsAturGainread-onlycurrentThe object provides GAIN for the ATU-R subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.13ColumnadslLineStatsAtucBits1read-onlycurrentThe object provides BITS for the ATU-C first 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.14ColumnadslLineStatsAtucBits2read-onlycurrentThe object provides BITS for the ATU-C last 256 subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.13.4.3.1.15ColumnadslLineStatsAturBitsread-onlycurrentThe object provides BITS for the ATU-R subcarriers. Each subcarrier takes two octets to store the value.
1.3.6.1.4.1.890.1.5.13.5.13.4.4TableadslLinePerfTablenot-accessiblecurrentThe table displays ADSL line performance.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1RowadslLinePerfEntrynot-accessiblecurrentAn entry of adslLinePerfTable.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.1ColumnadslLinePerfAtucCrcFastread-onlycurrentThe total number of CRC errors in fast mode.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.2ColumnadslLinePerfAturCrcFastread-onlycurrentThe total number of CRC errors in fast mode.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.3ColumnadslLinePerfAtucFecFastread-onlycurrentThe total number of FEC errors in fast mode.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.4ColumnadslLinePerfAturFecFastread-onlycurrentThe total number of FEC errors in fast mode.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.5ColumnadslLinePerfAtucCrcInterleaveread-onlycurrentThe total number of CRC errors in interleave mode.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.6ColumnadslLinePerfAturCrcInterleaveread-onlycurrentThe total number of CRC errors in interleave mode.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.7ColumnadslLinePerfAtucFecInterleaveread-onlycurrentThe total number of FEC errors in interleave mode.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.8ColumnadslLinePerfAturFecInterleaveread-onlycurrentThe total number of FEC errors in interleave mode.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.9ColumnadslLinePerfAtucEsread-onlycurrentCount of the number of Errored Seconds since link up.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.10ColumnadslLinePerfAturEsread-onlycurrentCount of the number of Errored Seconds since link up.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.11ColumnadslLinePerfAtucSesread-onlycurrentCount of the number of Severely Errored Seconds since link up.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.12ColumnadslLinePerfAturSesread-onlycurrentCount of the number of Severely Errored Seconds since link up.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.13ColumnadslLinePerfAtucUasread-onlycurrentCount of the number of Unavailable Seconds since link up.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.14ColumnadslLinePerfAturUasread-onlycurrentCount of the number of Unavailable Seconds since link up.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.15ColumnadslLinePerfAtucLofsread-onlycurrentCount of the number of Loss of Framing failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.16ColumnadslLinePerfAturLofsread-onlycurrentCount of the number of Loss of Framing failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.17ColumnadslLinePerfAtucLossread-onlycurrentCount of the number of Loss of Signal failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.18ColumnadslLinePerfAturLossread-onlycurrentCount of the number of Loss of Signal failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.19ColumnadslLinePerfAtucLprsread-onlycurrentCount of the number of Loss of Power failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.4.4.1.20ColumnadslLinePerfAturLprsread-onlycurrentCount of the number of Loss of Power failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.5NodeshdslStats
1.3.6.1.4.1.890.1.5.13.5.13.5.1TableshdslLinePerfTablenot-accessiblecurrentThe table displays SHDSL line performance.
1.3.6.1.4.1.890.1.5.13.5.13.5.1.1RowshdslLinePerfEntrynot-accessiblecurrentAn entry of shdslLinePerfTable.
1.3.6.1.4.1.890.1.5.13.5.13.5.1.1.1ColumnshdslLinePerfEsread-onlycurrentCount of Errored Seconds (ES) on this endpoint since link up.
1.3.6.1.4.1.890.1.5.13.5.13.5.1.1.2ColumnshdslLinePerfSesread-onlycurrentCount of Severely Errored Seconds (SES) on this endpoint since link up.
1.3.6.1.4.1.890.1.5.13.5.13.5.1.1.3ColumnshdslLinePerfCrcread-onlycurrentCount of CRC anomalies on this endpoint since link up.
1.3.6.1.4.1.890.1.5.13.5.13.5.1.1.4ColumnshdslLinePerfLoswsread-onlycurrentCount of Loss of Sync Word (LOSW) Seconds on this endpoint since link up.
1.3.6.1.4.1.890.1.5.13.5.13.5.1.1.5ColumnshdslLinePerfUasread-onlycurrentCount of Unavailable Seconds (UAS) on this endpoint since link up.
1.3.6.1.4.1.890.1.5.13.5.13.5.1.1.6ColumnshdslLinePerfSegmentAnomaliesread-onlycurrentCount of Segment Anomalies on this endpoint since link up.
1.3.6.1.4.1.890.1.5.13.5.13.5.1.1.7ColumnshdslLinePerfSegmentDefectread-onlycurrentCount of Segment Defects on this endpoint since link up.
1.3.6.1.4.1.890.1.5.13.5.13.5.2TableshdslPerfCurrTablenot-accessiblecurrentThe table displays SHDSL current performance. This table is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.5.2.1RowshdslPerfCurrEntrynot-accessiblecurrentAn entry of shdslPerfCurrTable.
1.3.6.1.4.1.890.1.5.13.5.13.5.2.1.1ColumnshdslPerfCurrSturLPRread-onlycurrentCount of the number of Loss of Power failures since agent reset.
1.3.6.1.4.1.890.1.5.13.5.13.6NodeipStats
1.3.6.1.4.1.890.1.5.13.5.13.6.1TableipInterfaceTablenot-accessiblecurrentThe table displays IP interface statistics.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1RowipInterfaceEntrynot-accessiblecurrentAn entry of ipInterfaceTable.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.1ColumnipInterfaceread-onlycurrentThe IP inband/outband interface.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.2ColumnipAddressread-onlycurrentIP address of the interface.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.3ColumnipNetmaskread-onlycurrentNetmask of the interface.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.4ColumnipBroadcastread-onlycurrentBroadcast address of the interface.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.5ColumnipMturead-onlycurrentThe size of the largest datagram which can be sent/received on the interface, specified in octets.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.6ColumnipVidread-onlycurrentManagement VLAN ID of the interface.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.7ColumnipInOctetread-onlycurrentThe total number of octets received on the interface.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.8ColumnipInUnicastread-onlycurrentThe number of subnetwork-unicast packets delivered to a higher-layer protocol.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.9ColumnipInMulticastread-onlycurrentThe number of subnetwork-multicast packets delivered to a higher-layer protocol.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.10ColumnipInDiscardread-onlycurrentThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr…
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.11ColumnipInErrorread-onlycurrentThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.12ColumnipInUnknownread-onlycurrentThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.13ColumnipOutOctetread-onlycurrentThe total number of octets transmitted out of the interface.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.14ColumnipOutUnicastread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se…
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.15ColumnipOutMulticastread-onlycurrentThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-multicast address, including those that were discarded or not …
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.16ColumnipOutDiscardread-onlycurrentThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted.
1.3.6.1.4.1.890.1.5.13.5.13.6.1.1.17ColumnipOutErrorread-onlycurrentThe number of outbound packets that could not be transmitted because of errors.
1.3.6.1.4.1.890.1.5.13.5.13.7NodemstpStats
1.3.6.1.4.1.890.1.5.13.5.13.7.1ScalarmstpExternalRootIdread-onlycurrentThe bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide…
1.3.6.1.4.1.890.1.5.13.5.13.7.2ScalarmstpExternalRootCostread-onlycurrentThe cost of the path to the root as seen from this bridge. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.7.3ScalarmstpExternalRootPortIdread-onlycurrentThe port number of the port which offers the lowest cost path from this bridge to the root bridge. This object is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.7.4ScalarmstpExternalRootMaxAgeread-onlycurrentThe maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is …
1.3.6.1.4.1.890.1.5.13.5.13.7.5ScalarmstpExternalRootHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become …
1.3.6.1.4.1.890.1.5.13.5.13.7.6ScalarmstpExternalRootForwardDelayread-onlycurrentThis time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The…
1.3.6.1.4.1.890.1.5.13.5.13.7.7TablemstpPortStatsTablenot-accessiblecurrentA table that contains port-specific MSTP statistics. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.7.7.1RowmstpPortStatsEntrynot-accessiblecurrentA list of MSTP statistics maintained by each port.
1.3.6.1.4.1.890.1.5.13.5.13.7.7.1.1ColumnmstpPortStatsExternalRootIdread-onlycurrentThe unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po…
1.3.6.1.4.1.890.1.5.13.5.13.7.7.1.2ColumnmstpPortStatsExternalRootCostread-onlycurrentThe path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.890.1.5.13.5.13.7.7.1.3ColumnmstpPortStatsExternalPortCostread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.7.7.1.4ColumnmstpPortStatsOperEdgePortread-onlycurrentThe operational value of the Edge Port parameter.
1.3.6.1.4.1.890.1.5.13.5.13.7.7.1.5ColumnmstpPortStatsOperPoint2Pointread-onlycurrentThe operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection o…
1.3.6.1.4.1.890.1.5.13.5.13.7.7.1.6ColumnmstpPortStatsMACOperationalread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.7.7.1.7ColumnmstpPortStatsRecvInternalread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.7.7.1.8ColumnmstpPortStatsRxStpCfgBPDUread-onlycurrentThe total number of received Configuration BPDUs.
1.3.6.1.4.1.890.1.5.13.5.13.7.7.1.9ColumnmstpPortStatsRxStpTcnBPDUread-onlycurrentThe total number of received Topology Change Notification (TCN) Messages.
1.3.6.1.4.1.890.1.5.13.5.13.7.7.1.10ColumnmstpPortStatsRxRstpBPDUread-onlycurrentThe total number of received RST BPDUs.
1.3.6.1.4.1.890.1.5.13.5.13.7.7.1.11ColumnmstpPortStatsRxMstpBPDUread-onlycurrentThe total number of received MST BPDUs.
1.3.6.1.4.1.890.1.5.13.5.13.7.8TablemstpXstStatsTablenot-accessiblecurrentA table that contains MSTP statistics for multiple spanning trees. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.7.8.1RowmstpXstStatsEntrynot-accessiblecurrentAn entry of mstpXstStatsTable.
1.3.6.1.4.1.890.1.5.13.5.13.7.8.1.1ColumnmstpXstStatsBridgeIdread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.7.8.1.2ColumnmstpXstStatsTimeSinceTopologyChangeread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.7.8.1.3ColumnmstpXstStatsTopologyChangesCountread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.7.8.1.4ColumnmstpXstStatsInternalRootPortIdread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.7.8.1.5ColumnmstpXstStatsInternalRootIdread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.7.8.1.6ColumnmstpXstStatsInternalRootCostread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.7.9TablemstpXstPortStatsTablenot-accessiblecurrentA table that contains MSTP port statistics for multiple spanning trees. This table is supported by R1.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.7.9.1RowmstpXstPortStatsEntrynot-accessiblecurrentAn entry of mstpXstPortStatsTable.
1.3.6.1.4.1.890.1.5.13.5.13.7.9.1.1ColumnmstpXstPortStatsUptimeread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.7.9.1.2ColumnmstpXstPortStatsPortIdread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.7.9.1.3ColumnmstpXstPortStatsStateread-onlycurrentThe port's current state.
1.3.6.1.4.1.890.1.5.13.5.13.7.9.1.4ColumnmstpXstPortStatsDesignatedBridgeIdread-onlycurrentThe Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.890.1.5.13.5.13.7.9.1.5ColumnmstpXstPortStatsDesignatedPortIdread-onlycurrentThe Port Identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.890.1.5.13.5.13.7.9.1.6ColumnmstpXstPortStatsInternalPortCostread-onlycurrentThe path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.890.1.5.13.5.13.7.9.1.7ColumnmstpXstPortStatsInternalRootIdread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.8NodevdslStats
1.3.6.1.4.1.890.1.5.13.5.13.8.1TablevdslLinePerfTablenot-accessiblecurrentThe table displays VDSL line performance. This table is supported by R2.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1RowvdslLinePerfEntrynot-accessiblecurrentAn entry of vdslLinePerfTable.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.1ColumnvdslLinePerfVtucCrcread-onlycurrentThe number of CRC errors since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.2ColumnvdslLinePerfVturCrcread-onlycurrentThe number of CRC errors since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.3ColumnvdslLinePerfVtucFecread-onlycurrentThe number of FEC errors since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.4ColumnvdslLinePerfVturFecread-onlycurrentThe number of FEC errors since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.5ColumnvdslLinePerfVtucLofsread-onlycurrentCount of the number of Loss of Framing failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.6ColumnvdslLinePerfVturLofsread-onlycurrentCount of the number of Loss of Framing failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.7ColumnvdslLinePerfVtucLossread-onlycurrentCount of the number of Loss of Signal failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.8ColumnvdslLinePerfVturLossread-onlycurrentCount of the number of Loss of Signal failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.9ColumnvdslLinePerfVtucLprsread-onlycurrentCount of the number of Loss of Power failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.10ColumnvdslLinePerfVturLprsread-onlycurrentCount of the number of Loss of Power failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.11ColumnvdslLinePerfVtucLolsread-onlycurrentCount of the number of Loss of Link failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.12ColumnvdslLinePerfVturLolsread-onlycurrentCount of the number of Loss of Link failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.13ColumnvdslLinePerfVtucESsread-onlycurrentCount of the number of Errored Seconds since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.14ColumnvdslLinePerfVturESsread-onlycurrentCount of the number of Errored Seconds since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.15ColumnvdslLinePerfVtucSESsread-onlycurrentCount of the number of Severely Errored Seconds since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.16ColumnvdslLinePerfVturSESsread-onlycurrentCount of the number of Severely Errored Seconds since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.17ColumnvdslLinePerfVtucUASsread-onlycurrentCount of the number of Unavailable Seconds since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.18ColumnvdslLinePerfVturUASsread-onlycurrentCount of the number of Unavailable Seconds since link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.19ColumnvdslLinePerfInmVtucEqInpread-onlycurrentThe INM Equivalent Inp histogram since last link up. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 t…
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.20ColumnvdslLinePerfInmVturEqInpread-onlycurrentThe INM Equivalent Inp histogram since last link up. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 t…
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.21ColumnvdslLinePerfInmVtucIATread-onlycurrentThe INM Inter Arrival Time histogram since last link up. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from…
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.22ColumnvdslLinePerfInmVturIATread-onlycurrentThe INM Inter Arrival Time histogram since last link up. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from…
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.23ColumnvdslLinePerfInmVtucMEread-onlycurrentThe INM total measurement since last link up. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value …
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.24ColumnvdslLinePerfInmVturMEread-onlycurrentThe INM total measurement since last link up. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value …
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.25ColumnvdslLinePerfVtucRxread-onlycurrentNumber of codewords retransmitted since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.26ColumnvdslLinePerfVturRxread-onlycurrentNumber of codewords retransmitted since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.27ColumnvdslLinePerfVtucRxCorrectedread-onlycurrentNumber of codewords corrected through retransmission since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.28ColumnvdslLinePerfVturRxCorrectedread-onlycurrentNumber of codewords corrected through retransmission since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.29ColumnvdslLinePerfVtucRxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.30ColumnvdslLinePerfVturRxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.31ColumnvdslLinePerfVtucLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.32ColumnvdslLinePerfVturLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.33ColumnvdslLinePerfVtucErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC x 2(-16) since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.34ColumnvdslLinePerfVturErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC x 2(-16) since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.35ColumnvdslLinePerfVtucMinEftrread-onlycurrentLowest EFTR of VTU-C observed since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.1.1.36ColumnvdslLinePerfVturMinEftrread-onlycurrentLowest EFTR of VTU-R observed since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.8.2TablevdslLineStatsTablenot-accessiblecurrentThe table displays VDSL line statistics. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1RowvdslLineStatsEntrynot-accessiblecurrentAn entry of vdslLineStatsTable.
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.1ColumnvdslLineStatsVtucBits1read-onlycurrentThe object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.2ColumnvdslLineStatsVtucBits2read-onlycurrentThe object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.3ColumnvdslLineStatsVtucBits3read-onlycurrentThe object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.4ColumnvdslLineStatsVtucBits4read-onlycurrentThe object provides Bits for the VTU-C 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.5ColumnvdslLineStatsVturBits1read-onlycurrentThe object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.6ColumnvdslLineStatsVturBits2read-onlycurrentThe object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.7ColumnvdslLineStatsVturBits3read-onlycurrentThe object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.8ColumnvdslLineStatsVturBits4read-onlycurrentThe object provides Bits for the VTU-R 1024 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 15.
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.9ColumnvdslLineStatsVtucGain1read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.10ColumnvdslLineStatsVtucGain2read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.11ColumnvdslLineStatsVtucGain3read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.12ColumnvdslLineStatsVtucGain4read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.13ColumnvdslLineStatsVtucGain5read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.14ColumnvdslLineStatsVtucGain6read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.15ColumnvdslLineStatsVtucGain7read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.16ColumnvdslLineStatsVtucGain8read-onlycurrentThe object provides Gain for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.17ColumnvdslLineStatsVturGain1read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.18ColumnvdslLineStatsVturGain2read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.19ColumnvdslLineStatsVturGain3read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.20ColumnvdslLineStatsVturGain4read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.21ColumnvdslLineStatsVturGain5read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.22ColumnvdslLineStatsVturGain6read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.23ColumnvdslLineStatsVturGain7read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.24ColumnvdslLineStatsVturGain8read-onlycurrentThe object provides Gain for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The value is in the range 0 to 4093. Each value in…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.25ColumnvdslLineStatsVtucHlogread-onlycurrentThe object provides Hlog for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The real Hlog(f) value is represented as (6-m(i)/1…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.26ColumnvdslLineStatsVturHlogread-onlycurrentThe object provides Hlog for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The real Hlog(f) value is represented as (6-m(i)/1…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.27ColumnvdslLineStatsVtucQlnread-onlycurrentThe object provides Qln for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. The QLN(f) is represented as ( -23-n(i)/2), with n(…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.28ColumnvdslLineStatsVturQlnread-onlycurrentThe object provides Qln for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. The QLN(f) is represented as ( -23-n(i)/2), with n(…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.29ColumnvdslLineStatsVtucSnrread-onlycurrentThe object provides Snr for the VTU-C 512 subcarriers. Each subcarrier takes one octets to store the value. Octet i is set to a value in the range 0 to 254 (-3…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.30ColumnvdslLineStatsVturSnrread-onlycurrentThe object provides Snr for the VTU-R 512 subcarriers. Each subcarrier takes one octets to store the value. Octet i is set to a value in the range 0 to 254 (-3…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.31ColumnvdslLineStatsVtucTssiread-onlycurrentThe object provides Tssi for the VTU-C 512 subcarriers. Each subcarrier takes two octets to store the value. Each value in this array is 16 bits wide. The tssi…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.32ColumnvdslLineStatsVturTssiread-onlycurrentThe object provides Tssi for the VTU-R 512 subcarriers. Each subcarrier takes two octets to store the value. Each value in this array is 16 bits wide. The tssi…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.33ColumnvdslLineStatsProtocolread-onlycurrentThe actual line protocol.
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.34ColumnvdslLineStatsUsCodingModeread-onlycurrentThe upstream coding mode of the line. This object is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.35ColumnvdslLineStatsDsCodingModeread-onlycurrentThe downstream coding mode of the line. This object is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.36ColumnvdslLineStatsVtucHlogGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4 a…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.37ColumnvdslLineStatsVturHlogGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the H(f) linear representation values for the respective transmission direction. The valid values are 1, 2, 4 a…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.38ColumnvdslLineStatsVtucQlnGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. This…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.39ColumnvdslLineStatsVturQlnGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the Quiet Line Noise values for the respective transmission direction. The valid values are 1, 2, 4 and 8. This…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.40ColumnvdslLineStatsVtucSnrGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. This object is sup…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.41ColumnvdslLineStatsVturSnrGroupSizeread-onlycurrentNumber of sub-carriers per group used to report the SNR values on the respective transmission direction. The valid values are 1, 2, 4 and 8. This object is sup…
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.42ColumnvdslLineStatsVtucRxPowerread-onlycurrentReceive power of vtuc (in unit of 0.1 dBm).
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.43ColumnvdslLineStatsVturRxPowerread-onlycurrentReceive power of vtur (in unit of 0.1 dBm).
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.44ColumnvdslLineStatsVtucSnrMarginread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.45ColumnvdslLineStatsVturSnrMarginread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.46ColumnvdslLineStatsVtucSigAttenread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.47ColumnvdslLineStatsVturSigAttenread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.48ColumnvdslLineStatsVtucLineAttenread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.8.2.1.49ColumnvdslLineStatsVturLineAttenread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.8.3TablevdslLineUsBandPlanTablenot-accessiblecurrentThe table displays VDSL line actual band plan. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.8.3.1RowvdslLineUsBandPlanEntrynot-accessiblecurrentAn entry of vdslLineUsBandPlanTable.
1.3.6.1.4.1.890.1.5.13.5.13.8.3.1.1ColumnvdslLineUsBandIdread-onlycurrentIhe id of the upstream pass band, starting from 1.
1.3.6.1.4.1.890.1.5.13.5.13.8.3.1.2ColumnvdslLineUsBandStartToneIdread-onlycurrentThe starting tone of the band.
1.3.6.1.4.1.890.1.5.13.5.13.8.3.1.3ColumnvdslLineUsBandStopToneIdread-onlycurrentThe stopping tone of the band.
1.3.6.1.4.1.890.1.5.13.5.13.8.4TablevdslLineDsBandPlanTablenot-accessiblecurrentThe table displays VDSL line actual band plan. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.8.4.1RowvdslLineDsBandPlanEntrynot-accessiblecurrentAn entry of vdslLineDsBandPlanTable.
1.3.6.1.4.1.890.1.5.13.5.13.8.4.1.1ColumnvdslLineDsBandIdread-onlycurrentIhe id of the downstream pass band, starting from 1.
1.3.6.1.4.1.890.1.5.13.5.13.8.4.1.2ColumnvdslLineDsBandStartToneIdread-onlycurrentThe starting tone of the band.
1.3.6.1.4.1.890.1.5.13.5.13.8.4.1.3ColumnvdslLineDsBandStopToneIdread-onlycurrentThe stopping tone of the band.
1.3.6.1.4.1.890.1.5.13.5.13.8.5TablevdslLineUsResultMaskTablenot-accessiblecurrentThe table displays VDSL line actual PSD mask. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.8.5.1RowvdslLineUsResultMaskEntrynot-accessiblecurrentAn entry of vdslLineUsResultMaskTable.
1.3.6.1.4.1.890.1.5.13.5.13.8.5.1.1ColumnvdslLineUsMaskIdread-onlycurrentThe id of the turning point of the mask, starting from 1.
1.3.6.1.4.1.890.1.5.13.5.13.8.5.1.2ColumnvdslLineUsMaskToneread-onlycurrentThe tone id.
1.3.6.1.4.1.890.1.5.13.5.13.8.5.1.3ColumnvdslLineUsMaskPsdread-onlycurrentThe psd, in 0.1 dBm/Hz.
1.3.6.1.4.1.890.1.5.13.5.13.8.6TablevdslLineDsResultMaskTablenot-accessiblecurrentThe table displays VDSL line actual PSD mask. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.8.6.1RowvdslLineDsResultMaskEntrynot-accessiblecurrentAn entry of vdslLineDsResultMaskTable.
1.3.6.1.4.1.890.1.5.13.5.13.8.6.1.1ColumnvdslLineDsMaskIdread-onlycurrentThe id of the turning point of the mask, starting from 1.
1.3.6.1.4.1.890.1.5.13.5.13.8.6.1.2ColumnvdslLineDsMaskToneread-onlycurrentThe tone id.
1.3.6.1.4.1.890.1.5.13.5.13.8.6.1.3ColumnvdslLineDsMaskPsdread-onlycurrentThe psd, in 0.1 dBm/Hz.
1.3.6.1.4.1.890.1.5.13.5.13.8.7TablevdslLinePerfCurrTablenot-accessiblecurrentThe table displays VDSL line current GINP/SOS/INM performance statistics.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1RowvdslLinePerfCurrEntrynot-accessiblecurrentAn entry of vdslLinePerfCurrTable.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.1ColumnvdslLinePerfCurrInmVtucEqInpread-onlycurrentThe INM Equivalent Inp histogram since system boot up. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.2ColumnvdslLinePerfCurrInmVturEqInpread-onlycurrentThe INM Equivalent Inp histogram since system boot up. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.3ColumnvdslLinePerfCurr15MInmVtucEqInpread-onlycurrentThe INM Equivalent Inp histogram during this 15 minutes interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for suppor…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.4ColumnvdslLinePerfCurr15MInmVturEqInpread-onlycurrentThe INM Equivalent Inp histogram during this 15 minutes interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for suppor…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.5ColumnvdslLinePerfCurr1DayInmVtucEqInpread-onlycurrentThe INM Equivalent Inp histogram during this 1 day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting …
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.6ColumnvdslLinePerfCurr1DayInmVturEqInpread-onlycurrentThe INM Equivalent Inp histogram during this 1 day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting …
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.7ColumnvdslLinePerfCurrInmVtucIATread-onlycurrentThe INM Inter Arrival Time histogram since system boot up. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting fr…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.8ColumnvdslLinePerfCurrInmVturIATread-onlycurrentThe INM Inter Arrival Time histogram since system boot up. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting fr…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.9ColumnvdslLinePerfCurr15MInmVtucIATread-onlycurrentThe INM Inter Arrival Time histogram during this 15 minutes interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for su…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.10ColumnvdslLinePerfCurr15MInmVturIATread-onlycurrentThe INM Inter Arrival Time histogram during this 15 minutes interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for su…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.11ColumnvdslLinePerfCurr1DayInmVtucIATread-onlycurrentThe INM Inter Arrival Time histogram during this 1 day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for support…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.12ColumnvdslLinePerfCurr1DayInmVturIATread-onlycurrentThe INM Inter Arrival Time histogram during this 1 day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for support…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.13ColumnvdslLinePerfCurrInmVtucMEread-onlycurrentThe INM total measurement since system boot up. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the valu…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.14ColumnvdslLinePerfCurrInmVturMEread-onlycurrentThe INM total measurement since system boot up. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the valu…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.15ColumnvdslLinePerfCurr15MInmVtucMEread-onlycurrentThe INM total measurement during this 15 minutes interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range …
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.16ColumnvdslLinePerfCurr15MInmVturMEread-onlycurrentThe INM total measurement during this 15 minutes interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range …
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.17ColumnvdslLinePerfCurr1DayInmVtucMEread-onlycurrentThe INM total measurement during this 1 day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of th…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.18ColumnvdslLinePerfCurr1DayInmVturMEread-onlycurrentThe INM total measurement during this 1 day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of th…
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.19ColumnvdslLinePerfCurrVtucRxread-onlycurrentNumber of codewords retransmitted since system boot up.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.20ColumnvdslLinePerfCurrVturRxread-onlycurrentNumber of codewords retransmitted since system boot up.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.21ColumnvdslLinePerfCurr15MVtucRxread-onlycurrentNumber of codewords retransmitted during this 15 minutes interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.22ColumnvdslLinePerfCurr15MVturRxread-onlycurrentNumber of codewords retransmitted during this 15 minutes interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.23ColumnvdslLinePerfCurr1DayVtucRxread-onlycurrentNumber of codewords retransmitted during this 1 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.24ColumnvdslLinePerfCurr1DayVturRxread-onlycurrentNumber of codewords retransmitted during this 1 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.25ColumnvdslLinePerfCurrVtucRxCorrectedread-onlycurrentNumber of codewords corrected through retransmission since system boot up.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.26ColumnvdslLinePerfCurrVturRxCorrectedread-onlycurrentNumber of codewords corrected through retransmission since system boot up.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.27ColumnvdslLinePerfCurr15MVtucRxCorrectedread-onlycurrentNumber of codewords corrected through retransmission during this 15 minutes interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.28ColumnvdslLinePerfCurr15MVturRxCorrectedread-onlycurrentNumber of codewords corrected through retransmission during this 15 minutes interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.29ColumnvdslLinePerfCurr1DayVtucRxCorrectedread-onlycurrentNumber of codewords corrected through retransmission during this 1 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.30ColumnvdslLinePerfCurr1DayVturRxCorrectedread-onlycurrentNumber of codewords corrected through retransmission during this 1 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.31ColumnvdslLinePerfCurrVtucRxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission since system boot up.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.32ColumnvdslLinePerfCurrVturRxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission since system boot up.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.33ColumnvdslLinePerfCurr15MVtucRxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission during this 15 minutes interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.34ColumnvdslLinePerfCurr15MVturRxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission during this 15 minutes interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.35ColumnvdslLinePerfCurr1DayVtucRxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission during this 1 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.36ColumnvdslLinePerfCurr1DayVturRxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission during this 1 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.37ColumnvdslLinePerfCurrVtucLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds since system boot up.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.38ColumnvdslLinePerfCurrVturLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds since system boot up.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.39ColumnvdslLinePerfCurr15MVtucLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds during this 15 minutes interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.40ColumnvdslLinePerfCurr15MVturLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds during this 15 minutes interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.41ColumnvdslLinePerfCurr1DayVtucLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds during this 1 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.42ColumnvdslLinePerfCurr1DayVturLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds during this 1 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.43ColumnvdslLinePerfCurrVtucErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC x 2(-16) since system boot up.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.44ColumnvdslLinePerfCurrVturErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC x 2(-16) since system boot up.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.45ColumnvdslLinePerfCurr15MVtucErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC x 2(-16) during this 15 minutes interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.46ColumnvdslLinePerfCurr15MVturErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC x 2(-16) during this 15 minutes interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.47ColumnvdslLinePerfCurr1DayVtucErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC x 2(-16) this 1 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.48ColumnvdslLinePerfCurr1DayVturErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC x 2(-16) this 1 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.49ColumnvdslLinePerfCurrVtucMinEftrread-onlycurrentLowest EFTR of VTU-C observed in the current interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.50ColumnvdslLinePerfCurrVturMinEftrread-onlycurrentLowest EFTR of VTU-R observed in the current interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.51ColumnvdslLinePerfCurr15MinVtucMinEftrread-onlycurrentLowest EFTR of VTU-C observed in the current 15 minutes interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.52ColumnvdslLinePerfCurr15MinVturMinEftrread-onlycurrentLowest EFTR of VTU-R observed in the current 15 minutes interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.53ColumnvdslLinePerfCurr1DayVtucMinEftrread-onlycurrentLowest EFTR of VTU-C observed in the current 1 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.7.1.54ColumnvdslLinePerfCurr1DayVturMinEftrread-onlycurrentLowest EFTR of VTU-R observed in the current 1 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.8TablevdslLinePerfHist15MinTablenot-accessiblecurrentThe table displays VDSL line 15-Min SOS/GINP/INM performance stats.
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1RowvdslLinePerfHist15MinEntrynot-accessiblecurrentAn entry of vdslLinePerfCurrTable.
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.1ColumnvdslLinePerfHist15MInmVtucEqInpread-onlycurrentThe INM Equivalent Inp histogram during 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from …
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.2ColumnvdslLinePerfHist15MInmVturEqInpread-onlycurrentThe INM Equivalent Inp histogram during 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from …
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.3ColumnvdslLinePerfHist15MInmVtucIATread-onlycurrentThe INM Inter Arrival Time histogram during 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting f…
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.4ColumnvdslLinePerfHist15MInmVturIATread-onlycurrentThe INM Inter Arrival Time histogram during 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting f…
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.5ColumnvdslLinePerfHist15MInmVtucMEread-onlycurrentThe INM total measurement during 15min interval.This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the valu…
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.6ColumnvdslLinePerfHist15MInmVturMEread-onlycurrentThe INM total measurement during 15min interval.This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the valu…
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.7ColumnvdslLinePerfHist15MVtucRtxread-onlycurrentNumber of codewords retransmitted during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.8ColumnvdslLinePerfHist15MVturRtxread-onlycurrentNumber of codewords retransmitted during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.9ColumnvdslLinePerfHist15MVtucRtxCorrectedread-onlycurrentNumber of codewords corrected through retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.10ColumnvdslLinePerfHist15MVturRtxCorrectedread-onlycurrentNumber of codewords corrected through retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.11ColumnvdslLinePerfHist15MVtucRtxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.12ColumnvdslLinePerfHist15MVturRtxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.13ColumnvdslLinePerfHist15MVtucLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.14ColumnvdslLinePerfHist15MVturLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.15ColumnvdslLinePerfHist15MVtucErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC x 2(-16) during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.16ColumnvdslLinePerfHist15MVturErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC x 2(-16) during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.17ColumnvdslLinePerfHist15MVtucMinEftrread-onlycurrentLowest EFTR of VTU-C observed during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.8.1.18ColumnvdslLinePerfHist15MVturMinEftrread-onlycurrentLowest EFTR of VTU-R observed during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.9TablevdslLinePerfHist1DayTablenot-accessiblecurrentThe table displays VDSL line 1-Day SOS/GINP/INM performance stats.
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1RowvdslLinePerfHist1DayEntrynot-accessiblecurrentAn entry of vdslLinePerfHist1DayTable.
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.1ColumnvdslLinePerfHist1DayInmVtucEqInpread-onlycurrentThe INM Equivalent Inp histogram during 1 day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from …
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.2ColumnvdslLinePerfHist1DayInmVturEqInpread-onlycurrentThe INM Equivalent Inp histogram during 1 day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from …
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.3ColumnvdslLinePerfHist1DayInmVtucIATread-onlycurrentThe INM Inter Arrival Time histogram during 1 day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting f…
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.4ColumnvdslLinePerfHist1DayInmVturIATread-onlycurrentThe INM Inter Arrival Time histogram during 1 day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting f…
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.5ColumnvdslLinePerfHist1DayInmVtucMEread-onlycurrentThe INM total measurement during 1 day interval.This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the valu…
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.6ColumnvdslLinePerfHist1DayInmVturMEread-onlycurrentThe INM total measurement during 1 day interval.This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the valu…
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.7ColumnvdslLinePerfHist1DayVtucRtxread-onlycurrentNumber of codewords retransmitted during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.8ColumnvdslLinePerfHist1DayVturRtxread-onlycurrentNumber of codewords retransmitted during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.9ColumnvdslLinePerfHist1DayVtucRtxCorrectedread-onlycurrentNumber of codewords corrected through retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.10ColumnvdslLinePerfHist1DayVturRtxCorrectedread-onlycurrentNumber of codewords corrected through retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.11ColumnvdslLinePerfHist1DayVtucRtxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.12ColumnvdslLinePerfHist1DayVturRtxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.13ColumnvdslLinePerfHist1DayVtucLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.14ColumnvdslLinePerfHist1DayVturLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.15ColumnvdslLinePerfHist1DayVtucErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC x 2(-16) during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.16ColumnvdslLinePerfHist1DayVturErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC x 2(-16) during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.17ColumnvdslLinePerfHist1DayVtucMinEftrread-onlycurrentLowest EFTR of VTU-C observed during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.9.1.18ColumnvdslLinePerfHist1DayVturMinEftrread-onlycurrentLowest EFTR of VTU-R observed during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.8.10TablevdslChanStatsTablenot-accessiblecurrentThe table displays VDSL channel Status.
1.3.6.1.4.1.890.1.5.13.5.13.8.10.1RowvdslChanStatsEntrynot-accessiblecurrentAn entry of vdslChanStatsTable.
1.3.6.1.4.1.890.1.5.13.5.13.8.10.1.2ColumnvdslChanActualRaModeread-onlycurrentThe actual RA mode. The possible values are: fixedRateMode(1) - Fixed rate mode raInit(2) - Adaptive rate mode at initialization dynamicRa(3) - Dynamic rate ad…
1.3.6.1.4.1.890.1.5.13.5.13.8.10.1.3ColumnvdslChanRetransmissionModeread-onlycurrentRTX_USED operational data parameter. The possible values are: rtxInUse(1) - RTX in use. rtxForbidden(2) - RTX not in use because RTX_MODE = FORBIDDEN. rtxNotSu…
1.3.6.1.4.1.890.1.5.13.5.13.8.10.1.4ColumnvdslChanRetransmissionOverheadread-onlycurrentExpected retransmission overhead in G.inp due to REIN and SHINE noise. Unit is kbps.
1.3.6.1.4.1.890.1.5.13.5.13.9NodepaepvcStats
1.3.6.1.4.1.890.1.5.13.5.13.9.1TablepaepvcSessionTablenot-accessiblecurrentThis table shows the paepvc session statistics. This table is supported by R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.9.1.1RowpaepvcSessionEntrynot-accessiblecurrentAn entry of paepvcSessionTable.
1.3.6.1.4.1.890.1.5.13.5.13.9.1.1.1ColumnpaepvcSessionVpiread-onlycurrentThe PAEPVC VPI.
1.3.6.1.4.1.890.1.5.13.5.13.9.1.1.2ColumnpaepvcSessionVciread-onlycurrentThe PAEPVC VCI.
1.3.6.1.4.1.890.1.5.13.5.13.9.1.1.3ColumnpaepvcSessionStateread-onlycurrentThe PAEPVC status.
1.3.6.1.4.1.890.1.5.13.5.13.9.1.1.4ColumnpaepvcSessionIdread-onlycurrentThe PAEPVC session ID.
1.3.6.1.4.1.890.1.5.13.5.13.9.1.1.5ColumnpaepvcSessionUpTimeread-onlycurrentThe PAEPVC session uptime.
1.3.6.1.4.1.890.1.5.13.5.13.9.1.1.6ColumnpaepvcSessionAcNameread-onlycurrentAccess concentrator name.
1.3.6.1.4.1.890.1.5.13.5.13.9.1.1.7ColumnpaepvcSessionSrvcNameread-onlycurrentService name.
1.3.6.1.4.1.890.1.5.13.5.13.9.2TablepaepvcCountTablenot-accessiblecurrentThis table shows the paepvc counters. This table is supported by R1.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1RowpaepvcCountEntrynot-accessiblecurrentAn entry of paepvcCountTable.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.1ColumnpaepvcCountVpiread-onlycurrentThe PAEPVC VPI.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.2ColumnpaepvcCountVciread-onlycurrentThe PAEPVC VCI.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.3ColumnpaepvcCountPppLcpCfgReqRxread-onlycurrentThe number of ppp lcp config-request received.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.4ColumnpaepvcCountPppLcpEchoReqRxread-onlycurrentThe number of ppp lcp echo-request received.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.5ColumnpaepvcCountPppLcpEchoReplyRxread-onlycurrentThe number of ppp lcp echo-reply received.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.6ColumnpaepvcCountPadiTxread-onlycurrentThe number of pppoe padi transfered.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.7ColumnpaepvcCountPadoRxread-onlycurrentThe number of pppoe pado received.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.8ColumnpaepvcCountPadrTxread-onlycurrentThe number of pppoe padr received.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.9ColumnpaepvcCountPadsRxread-onlycurrentThe number of pppoe pads received.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.10ColumnpaepvcCountPadtTxread-onlycurrentThe number of pppoe padt transfered.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.11ColumnpaepvcCountPadtRxread-onlycurrentThe number of pppoe padt received.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.12ColumnpaepvcCountSrvcnameErrRxread-onlycurrentThe number of pppoe service name error received.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.13ColumnpaepvcCountAcnameErrRxread-onlycurrentThe number of pppoe access concentrator name error received.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.14ColumnpaepvcCountGenericErrTxread-onlycurrentThe number of pppoe generic error transfered.
1.3.6.1.4.1.890.1.5.13.5.13.9.2.1.15ColumnpaepvcCountGenericErrRxread-onlycurrentThe number of pppoe generic error received.
1.3.6.1.4.1.890.1.5.13.5.13.10NodevlanMacStats
1.3.6.1.4.1.890.1.5.13.5.13.10.1ScalarvlanMacDisplayTargetread-writecurrentThis managed object is a filter used for identify the target from which the MAC addresses are learned in macTable. Ifindex is used to specify a specific interf…
1.3.6.1.4.1.890.1.5.13.5.13.10.2ScalarvlanMacDisplayVidread-writecurrentThis object is supported by R1.03 and later versions. This managed object is a filter used for identifying the target from which the MAC addresses are learned …
1.3.6.1.4.1.890.1.5.13.5.13.10.3TablevlanMacTablenot-accessiblecurrentThis table is supported by R1.03 and later versions. A table that contains information about unicast entries for which the bridge has forwarding and/or filteri…
1.3.6.1.4.1.890.1.5.13.5.13.10.3.1RowvlanMacEntrynot-accessiblecurrentAn entry of vlanMacTable.
1.3.6.1.4.1.890.1.5.13.5.13.10.3.1.1ColumnvlanMacAddressread-onlycurrentA unicast MAC address for which the bridge has forwarding and/or filtering information.
1.3.6.1.4.1.890.1.5.13.5.13.10.3.1.2ColumnvlanMacPortread-onlycurrentThe port from which the mac address has been learned.
1.3.6.1.4.1.890.1.5.13.5.13.10.3.1.3ColumnvlanMacStatusread-onlycurrentThe status of this entry.
1.3.6.1.4.1.890.1.5.13.5.13.11NodeipbpvcStats
1.3.6.1.4.1.890.1.5.13.5.13.11.1TablearpproxyTablenot-accessiblecurrentDisplay ARP table. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.11.1.1RowarpproxyEntrynot-accessiblecurrentAn entry of arpproxyTable.
1.3.6.1.4.1.890.1.5.13.5.13.11.1.1.1ColumnarpproxyIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.1.1.2ColumnarpproxyMacread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.1.1.3ColumnarpproxyIfIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.1.1.4ColumnarpproxyVpiread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.1.1.5ColumnarpproxyVciread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.1.1.6ColumnarpproxyInterfaceIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.1.1.7ColumnarpproxyInterfaceMaskread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.1.1.8ColumnarpproxyInterfaceVidread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.1.1.9ColumnarpproxyDhcpIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.1.1.10ColumnarpproxyTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.2TableipbpvcIfDynamicTablenot-accessiblecurrentDisplay runtime interfaces. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.11.2.1RowipbpvcIfDynamicEntrynot-accessiblecurrentAn entry of ipbpvcIfDynamicTable.
1.3.6.1.4.1.890.1.5.13.5.13.11.2.1.1ColumnipbpvcIfDynamicIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.2.1.2ColumnipbpvcIfDynamicMaskread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.2.1.3ColumnipbpvcIfDynamicIfIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.2.1.4ColumnipbpvcIfDynamicVpiread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.2.1.5ColumnipbpvcIfDynamicVciread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.3TableipbpvcRouteDynamicTablenot-accessiblecurrentDisplay runtime routing table. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.11.3.1RowipbpvcRouteDynamicEntrynot-accessiblecurrentAn entry of ipbpvcRouteDynamicTable.
1.3.6.1.4.1.890.1.5.13.5.13.11.3.1.1ColumnipbpvcRouteDynamicTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.3.1.2ColumnipbpvcRouteDynamicIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.3.1.3ColumnipbpvcRouteDynamicMaskread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.3.1.4ColumnipbpvcRouteDynamicNextHopread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.3.1.5ColumnipbpvcRouteDynamicMetricread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.11.3.1.6ColumnipbpvcRouteDynamicPriorityread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12NodevoipStats
1.3.6.1.4.1.890.1.5.13.5.13.12.1TablevoipLineStatusTablenot-accessiblecurrentThe table displays VoIP line status. This table is supported by R4.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.12.1.1RowvoipLineStatusEntrynot-accessiblecurrentAn entry of voipLineStatusTable.
1.3.6.1.4.1.890.1.5.13.5.13.12.1.1.1ColumnvoipLineStatusFxsStatusread-onlycurrentFXS status of the line.
1.3.6.1.4.1.890.1.5.13.5.13.12.1.1.2ColumnvoipLineStatusServiceStatusread-onlycurrentService status of the line.
1.3.6.1.4.1.890.1.5.13.5.13.12.2TablevoipLineInfoTablenot-accessiblecurrentThe table displays VoIP line information. This table is supported by R4.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1RowvoipLineInfoEntrynot-accessiblecurrentAn entry of voipLineInfoTable.
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1.1ColumnvoipLineInfoSipLocalUriread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1.2ColumnvoipLineInfoSipRemoteUriread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1.3ColumnvoipLineInfoRtpTxCodecTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1.4ColumnvoipLineInfoRtpRxCodecTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1.5ColumnvoipLineInfoRtpTxPtread-onlycurrent1: g711mu(0) 2: g711a(8) 3: g723(4) 4: g729(18) 5: g726_16(96) 6: g726_24(97) 7: g728_32(98) 8: g728_40(99)
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1.6ColumnvoipLineInfoRtpRxPtread-onlycurrent1: g711mu(0) 2: g711a(8) 3: g723(4) 4: g729(18) 5: g726_16(96) 6: g726_24(97) 7: g728_32(98) 8: g728_40(99)
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1.7ColumnvoipLineInfoRtpLocalIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1.8ColumnvoipLineInfoRtpRemoteIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1.9ColumnvoipLineInfoRtpLocalPortread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1.10ColumnvoipLineInfoRtpRemotePortread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1.11ColumnvoipLineInfoLastCidModeread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1.12ColumnvoipLineInfoPlaySignalTelread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.2.1.13ColumnvoipLineInfoPlaySignalNetread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.3TablevoipH248StatTablenot-accessiblecurrentThe table displays registration status of media gateway. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.12.3.1RowvoipH248StatEntrynot-accessiblecurrentAn entry of voipH248StatTable.
1.3.6.1.4.1.890.1.5.13.5.13.12.3.1.1ColumnvoipH248StatSlotread-onlycurrentLine card slot number.
1.3.6.1.4.1.890.1.5.13.5.13.12.3.1.2ColumnvoipH248StatMgNameread-onlycurrentMG name.
1.3.6.1.4.1.890.1.5.13.5.13.12.3.1.3ColumnvoipH248StatMgStateread-onlycurrentMG state.
1.3.6.1.4.1.890.1.5.13.5.13.12.4TablevoipSipStatTablenot-accessiblecurrentThe table displays the status of SIP proxy server while local call feature is enabled. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.12.4.1RowvoipSipStatEntrynot-accessiblecurrentAn entry of voipSipStatTable.
1.3.6.1.4.1.890.1.5.13.5.13.12.4.1.1ColumnvoipSipStatSlotread-onlycurrentLine card slot number.
1.3.6.1.4.1.890.1.5.13.5.13.12.4.1.2ColumnvoipSipStatProxyIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.4.1.3ColumnvoipSipStatProxySvrread-onlycurrentProxy server IP or proxy server doamin name.
1.3.6.1.4.1.890.1.5.13.5.13.12.4.1.4ColumnvoipSipStatProxyPortread-onlycurrentProxy server port.
1.3.6.1.4.1.890.1.5.13.5.13.12.4.1.5ColumnvoipSipStatStateread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.5TablevoipH248InterfaceStatTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.5.1RowvoipH248InterfaceStatEntrynot-accessiblecurrentAn entry of voipH248InterfaceStatTable.
1.3.6.1.4.1.890.1.5.13.5.13.12.5.1.1ColumnvoipH248InterfaceStatIdread-onlycurrentLine card slot number.
1.3.6.1.4.1.890.1.5.13.5.13.12.5.1.2ColumnvoipH248InterfaceStatMgStateread-onlycurrentMg State
1.3.6.1.4.1.890.1.5.13.5.13.12.5.1.3ColumnvoipH248InterfaceStatPrimarySlotread-onlycurrentPrimary Slot
1.3.6.1.4.1.890.1.5.13.5.13.12.5.1.4ColumnvoipH248InterfaceStatSecondarySlotread-onlycurrentSecondary Slot
1.3.6.1.4.1.890.1.5.13.5.13.12.5.1.5ColumnvoipH248InterfaceStatPrimaryProtectionStateread-onlycurrentPrimary Protection State
1.3.6.1.4.1.890.1.5.13.5.13.12.5.1.6ColumnvoipH248InterfaceStatSecondaryProtectionStateread-onlycurrentSecondary Protection State
1.3.6.1.4.1.890.1.5.13.5.13.12.5.1.7ColumnvoipH248InterfaceStatRedundantStateread-onlycurrentRedundant State
1.3.6.1.4.1.890.1.5.13.5.13.12.6TablevoipH248MediaStatTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.6.1RowvoipH248MediaStatEntrynot-accessiblecurrentAn entry of voipH248MediaStatTable.
1.3.6.1.4.1.890.1.5.13.5.13.12.6.1.1ColumnvoipH248MediaStatInterfaceIdread-onlycurrentInterface ID.
1.3.6.1.4.1.890.1.5.13.5.13.12.6.1.2ColumnvoipH248MediaStatSlaveIdread-onlycurrentMedia ID
1.3.6.1.4.1.890.1.5.13.5.13.12.6.1.3ColumnvoipH248MediaStatSlaveIpread-onlycurrentMedia Ip
1.3.6.1.4.1.890.1.5.13.5.13.12.6.1.4ColumnvoipH248MediaStatMgmtInbandIpread-onlycurrentManagement Inband Ip
1.3.6.1.4.1.890.1.5.13.5.13.12.6.1.5ColumnvoipH248MediaStatMgmtOutbandIpread-onlycurrentManagement Onband Ip
1.3.6.1.4.1.890.1.5.13.5.13.12.6.1.6ColumnvoipH248MediaStatSlotIdread-onlycurrentslot id
1.3.6.1.4.1.890.1.5.13.5.13.12.6.1.7ColumnvoipH248MediaStatPortCountread-onlycurrentport count
1.3.6.1.4.1.890.1.5.13.5.13.12.6.1.8ColumnvoipH248MediaStatStateread-onlycurrentstate
1.3.6.1.4.1.890.1.5.13.5.13.12.7TablevoipH248TerminationStatTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.7.1RowvoipH248TerminationStatEntrynot-accessiblecurrentAn entry of voipH248TerminationStatStateTable.
1.3.6.1.4.1.890.1.5.13.5.13.12.7.1.1ColumnvoipH248TerminationStatStateIdread-onlycurrentInterface Id of the termination.
1.3.6.1.4.1.890.1.5.13.5.13.12.7.1.2ColumnvoipH248TerminationStatStateMediaIdread-onlycurrentMedia Card Id of the termination.
1.3.6.1.4.1.890.1.5.13.5.13.12.7.1.3ColumnvoipH248TerminationStatStatePortNumberread-onlycurrentPort number the termination.
1.3.6.1.4.1.890.1.5.13.5.13.12.7.1.4ColumnvoipH248TerminationStatNameread-onlycurrentTermination Name.
1.3.6.1.4.1.890.1.5.13.5.13.12.7.1.5ColumnvoipH248TerminationStatPhoneStateread-onlycurrentPhone State
1.3.6.1.4.1.890.1.5.13.5.13.12.7.1.6ColumnvoipH248TerminationStatCallServiceStateread-onlycurrentCall Service State
1.3.6.1.4.1.890.1.5.13.5.13.12.8NodevoipH248TerminationStatQuery
1.3.6.1.4.1.890.1.5.13.5.13.12.8.1ScalarvoipH248TerminationStatQueryInterfaceIdread-writecurrentInterface Id
1.3.6.1.4.1.890.1.5.13.5.13.12.8.2ScalarvoipH248TerminationStatQueryTerminationNameread-writecurrentTermination Name
1.3.6.1.4.1.890.1.5.13.5.13.12.8.3ScalarvoipH248TerminationStatQuerySlaveIdread-onlycurrentSlave Id
1.3.6.1.4.1.890.1.5.13.5.13.12.8.4ScalarvoipH248TerminationStatQuerySlaveIpread-onlycurrentSlave Ip
1.3.6.1.4.1.890.1.5.13.5.13.12.8.5ScalarvoipH248TerminationStatQueryMgmtInbandIpread-onlycurrentManagement Inband Ip
1.3.6.1.4.1.890.1.5.13.5.13.12.8.6ScalarvoipH248TerminationStatQueryMgmtOutbandIpread-onlycurrentManagement Outband Ip
1.3.6.1.4.1.890.1.5.13.5.13.12.8.7ScalarvoipH248TerminationStatQuerySlotIdread-onlycurrentSlot Id
1.3.6.1.4.1.890.1.5.13.5.13.12.8.8ScalarvoipH248TerminationStatQueryPortCountread-onlycurrentPort Count
1.3.6.1.4.1.890.1.5.13.5.13.12.8.9ScalarvoipH248TerminationStatQueryStateread-onlycurrentState
1.3.6.1.4.1.890.1.5.13.5.13.12.8.10ScalarvoipH248TerminationStatQueryPortNumberread-onlycurrentPort Number
1.3.6.1.4.1.890.1.5.13.5.13.12.8.11ScalarvoipH248TerminationStatQueryPhoneStateread-onlycurrentPhone State
1.3.6.1.4.1.890.1.5.13.5.13.12.8.12ScalarvoipH248TerminationStatQueryCallServiceStateread-onlycurrentCallService State
1.3.6.1.4.1.890.1.5.13.5.13.12.9TablevoipRtpStatTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.9.1RowvoipRtpStatEntrynot-accessiblecurrentAn entry of voipRtpStatTable.
1.3.6.1.4.1.890.1.5.13.5.13.12.9.1.1ColumnvoipRtpStatTxRateread-onlycurrentreal-time RTP tx packet rate in bps.
1.3.6.1.4.1.890.1.5.13.5.13.12.9.1.2ColumnvoipRtpStatRxRateread-onlycurrentreal-time RTP rx packet rate in bps.
1.3.6.1.4.1.890.1.5.13.5.13.12.9.1.3ColumnvoipRtpStatTxPktCntread-onlycurrenttotal RTP tx packet counter for current/last call.
1.3.6.1.4.1.890.1.5.13.5.13.12.9.1.4ColumnvoipRtpStatRxPktCntread-onlycurrenttotal RTP rx packet counter for current/last call.
1.3.6.1.4.1.890.1.5.13.5.13.12.9.1.5ColumnvoipRtpStatTxFracLostread-onlycurrentRTP Tx packet lost in percentage
1.3.6.1.4.1.890.1.5.13.5.13.12.9.1.6ColumnvoipRtpStatRxFracLostread-onlycurrentRTP Rx packet lost in percentage
1.3.6.1.4.1.890.1.5.13.5.13.12.9.1.7ColumnvoipRtpStatTxJitterread-onlycurrentTX jitter in micro-second
1.3.6.1.4.1.890.1.5.13.5.13.12.9.1.8ColumnvoipRtpStatRxJitterread-onlycurrentRx jitter in micro-second
1.3.6.1.4.1.890.1.5.13.5.13.12.9.1.9ColumnvoipRtpStatTxAvgDelayread-onlycurrentAverage Tx delay in ms
1.3.6.1.4.1.890.1.5.13.5.13.12.9.1.10ColumnvoipRtpStatRxAvgDelayread-onlycurrentAverage Rx delay in ms
1.3.6.1.4.1.890.1.5.13.5.13.12.10NodevoipCdrStat
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1NodevoipCdrStatFilter
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.1ScalarvoipCdrStatFilterInterfaceread-writecurrentInterface id.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.2ScalarvoipCdrStatFilterIndexEnableread-writecurrentSet 0 to clear voipCdrStatFilterIndex. It will show 1 if voipCdrStatFilterIndex had been set before.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.3ScalarvoipCdrStatFilterIndexread-writecurrentIndex filter.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.4ScalarvoipCdrStatFilterSlotPortEnableread-writecurrentSet 0 to clear voipCdrStatFilterSlot and voipCdrStatFilterPort. It will show 1 if voipCdrStatFilterSlot and voipCdrStatFilterPort had been set before.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.5ScalarvoipCdrStatFilterSlotread-writecurrentSlot filter.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.6ScalarvoipCdrStatFilterPortread-writecurrentPort filter, 0 mean select all port
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.7ScalarvoipCdrStatFilterRtpElpasedTimeEnableread-writecurrentSet 0 to clear voipCdrStatFilterRtpElpasedTimeMin and voipCdrStatFilterRtpElpasedTimeMax. It will show 1 if any of them had been set before.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.8ScalarvoipCdrStatFilterRtpElpasedTimeMinread-writecurrentin unit of second
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.9ScalarvoipCdrStatFilterRtpElpasedTimeMaxread-writecurrentin unit of second
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.10ScalarvoipCdrStatFilterTelEnableread-writecurrentSet 0 to clear voipCdrStatFilterTel. It will show 1 if voipCdrStatFilterTel had been set before.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.11ScalarvoipCdrStatFilterTelread-writecurrentTelephone number filter, max length is 24.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.12ScalarvoipCdrStatFilterOffhookEnableread-writecurrentSet 0 to clear voipCdrStatFilterOffhookDateMin, voipCdrStatFilterOffhookTimeMin, voipCdrStatFilterOffhookDateMax, and voipCdrStatFilterOffhookDateMax . It will…
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.13ScalarvoipCdrStatFilterOffhookDateMinread-writecurrentMinimum offhook date filter, format example:20120101
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.14ScalarvoipCdrStatFilterOffhookTimeMinread-writecurrentMinimum offhook time filter, format example:235959
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.15ScalarvoipCdrStatFilterOffhookDateMaxread-writecurrentMaximum offhook date filter, format example:20120101
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.16ScalarvoipCdrStatFilterOffhookTimeMaxread-writecurrentMaximum offhook time filter, format example:235959
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.17ScalarvoipCdrStatFilterCodeEnableread-writecurrentSet 0 to clear voipCdrStatFilterCode. It will show 1 if voipCdrStatFilterCode had been set before.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.18ScalarvoipCdrStatFilterCoderead-writecurrentCode filter. It is a bit map of the call state record. bit 6(0x20): offhook bit 5(0x10): remote ringback tone bit 4(0x08): local ringback tone bit 3(0x04): dia…
1.3.6.1.4.1.890.1.5.13.5.13.12.10.1.19ScalarvoipCdrStatFilterErrCodeEnableread-writecurrentSet 1 to ebable H.248 errcode filter. Set 0 to disable it.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2TablevoipCdrStatResultTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1RowvoipCdrStatResultEntrynot-accessiblecurrentAn entry of voipCdrStatResultTable.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.1ColumnvoipCdrStatResultIndexread-onlycurrentIndex of record. Index of the newest record will show first.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.2ColumnvoipCdrStatResultSlotread-onlycurrentRecord Slot
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.3ColumnvoipCdrStatResultPortread-onlycurrentRecord port
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.4ColumnvoipCdrStatResultTermNameread-onlycurrentThe termination name used for this record.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.5ColumnvoipCdrStatResultLineDirectionread-onlycurrent1: Call in 2: Dial out
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.6ColumnvoipCdrStatResultLocalNumberread-onlycurrentThe local phone number set by manager and use for localcall
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.7ColumnvoipCdrStatResultRemoteNumberread-onlycurrentThe remote phone number which assigned by mgc
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.8ColumnvoipCdrStatResultOffHookDatetimeread-onlycurrentIn format YYYYMMDDhhmmss
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.9ColumnvoipCdrStatResultOnHookDatetimeread-onlycurrentIn format YYYYMMDDhhmmss
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.10ColumnvoipCdrStatResultRingStartDatetimeread-onlycurrentIn format YYYYMMDDhhmmss
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.11ColumnvoipCdrStatResultRingStopDatetimeread-onlycurrentIn format YYYYMMDDhhmmss
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.12ColumnvoipCdrStatResultRtpStartDatetimeread-onlycurrentIn format YYYYMMDDhhmmss
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.13ColumnvoipCdrStatResultRtpStopDatetimeread-onlycurrentIn format YYYYMMDDhhmmss
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.14ColumnvoipCdrStatResultRtpElapsedTimeread-onlycurrentIn unit of second
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.15ColumnvoipCdrStatResultTxRateread-onlycurrentreal-time RTP tx packet rate in bps
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.16ColumnvoipCdrStatResultRxRateread-onlycurrentreal-time RTP rx packet rate in bps
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.17ColumnvoipCdrStatResultTxPktCntread-onlycurrenttotal RTP tx packet counter
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.18ColumnvoipCdrStatResultRxPktCntread-onlycurrenttotal RTP rx packet counter
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.19ColumnvoipCdrStatResultTxFracLostread-onlycurrentRTP tx packet lost in percentage
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.20ColumnvoipCdrStatResultRxFracLostread-onlycurrentRTP rx packet lost in percentage
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.21ColumnvoipCdrStatResultTxJitterread-onlycurrentTx Jitter in micro-second
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.22ColumnvoipCdrStatResultRxJitterread-onlycurrentRx Jitter in micro-second
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.23ColumnvoipCdrStatResultTxAvgDelayread-onlycurrentAverage tx delay in ms
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.24ColumnvoipCdrStatResultRxAvgDelayread-onlycurrentAverage rx delay in ms
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.25ColumnvoipCdrStatResultCoderead-onlycurrentBit map of the call state record. bit 6(0x20): offhook bit 5(0x10): remote ringback tone bit 4(0x08): local ringback tone bit 3(0x04): dial tone bit 2(0x02): r…
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.26ColumnvoipCdrStatResultErrCoderead-onlycurrentErrcode of H.248 protocol. 0 mean no error.
1.3.6.1.4.1.890.1.5.13.5.13.12.10.2.1.27ColumnvoipCdrStatResultTerminationCauseread-onlycurrentTermination Cause
1.3.6.1.4.1.890.1.5.13.5.13.12.11NodevoipH248Statistics
1.3.6.1.4.1.890.1.5.13.5.13.12.11.1ScalarvoipH248StatisticsInterfaceread-writecurrentInterface id.
1.3.6.1.4.1.890.1.5.13.5.13.12.11.2ScalarvoipH248StatisticsMsgSentread-onlycurrentNumber of sent protocol message, include reset and error.
1.3.6.1.4.1.890.1.5.13.5.13.12.11.3ScalarvoipH248StatisticsMsgRecvread-onlycurrentNumber of received message.
1.3.6.1.4.1.890.1.5.13.5.13.12.11.4ScalarvoipH248StatisticsMsgLostread-onlycurrentNumber of message without reply.
1.3.6.1.4.1.890.1.5.13.5.13.12.11.5ScalarvoipH248StatisticsMsgResentread-onlycurrentNumber of resent message.
1.3.6.1.4.1.890.1.5.13.5.13.12.11.6ScalarvoipH248StatisticsErrorMsgread-onlycurrentNumber of error message sent.
1.3.6.1.4.1.890.1.5.13.5.13.12.11.7ScalarvoipH248StatisticsUnIdentifiedMsgread-onlycurrentNumber of parse fail message.
1.3.6.1.4.1.890.1.5.13.5.13.13NodeenetStats
1.3.6.1.4.1.890.1.5.13.5.13.13.1TableenetPortStatusTablenot-accessiblecurrentThe table displays ethernet port status.
1.3.6.1.4.1.890.1.5.13.5.13.13.1.1RowenetPortStatusEntrynot-accessiblecurrentAn entry of enetPortStatusTable.
1.3.6.1.4.1.890.1.5.13.5.13.13.1.1.1ColumnenetPortStatusLinkUpTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.13.1.1.2ColumnenetPortStatusLinkUpTimeread-onlycurrentThe time since the enet port up.
1.3.6.1.4.1.890.1.5.13.5.13.13.1.1.3ColumnenetPortStatusLinkSpeedread-onlycurrentLink speed in Mbps.
1.3.6.1.4.1.890.1.5.13.5.13.13.1.1.4ColumnenetPortStatusLinkDuplexread-onlycurrentLink full/half duplex.
1.3.6.1.4.1.890.1.5.13.5.13.13.1.1.5ColumnenetPortStatusDataRateTxread-onlycurrentTX data rate in kbps.
1.3.6.1.4.1.890.1.5.13.5.13.13.1.1.6ColumnenetPortStatusDataRateRxread-onlycurrentRX data rate in kbps.
1.3.6.1.4.1.890.1.5.13.5.13.13.1.1.7ColumnenetPortStatusDataUtilTxread-onlycurrentTX throughput utilization in percentage.
1.3.6.1.4.1.890.1.5.13.5.13.13.1.1.8ColumnenetPortStatusDataUtilRxread-onlycurrentRX throughput utilization in percentage.
1.3.6.1.4.1.890.1.5.13.5.13.13.2TablesfpPortStatusTablenot-accessiblecurrentThe table displays SFP ethernet port status. This table is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1RowsfpPortStatusEntrynot-accessiblecurrentAn entry of sfpPortStatusTable.
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1.1ColumnsfpIdread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1.2ColumnsfpConnectorread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1.3ColumnsfpTransceiverread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1.4ColumnsfpEncodingread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1.5ColumnsfpNameread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1.6ColumnsfpPartNumberread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1.7ColumnsfpRevisionread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1.8ColumnsfpSerialNumberread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1.9ColumnsfpTemperatureread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1.10ColumnsfpSupplyVoltageread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1.11ColumnsfpTxBiasCurrentread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1.12ColumnsfpTxPowerread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.13.2.1.13ColumnsfpRxPowerread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.14NodeifStats
1.3.6.1.4.1.890.1.5.13.5.13.14.1TableifStatusTablenot-accessiblecurrentThe table displays port interface status. This table is supported by R5.02 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.14.1.1RowifStatusEntrynot-accessiblecurrentAn entry of ifStatusTable.
1.3.6.1.4.1.890.1.5.13.5.13.14.1.1.1ColumnifInRateread-onlycurrentThe real-time receiving data rate in kbps
1.3.6.1.4.1.890.1.5.13.5.13.14.1.1.2ColumnifOutRateread-onlycurrentThe real-time transmitting data rate in kbps
1.3.6.1.4.1.890.1.5.13.5.13.14.1.1.3ColumnifCurrentStatusread-onlycurrentCurrent status of an interface
1.3.6.1.4.1.890.1.5.13.5.13.14.1.1.4ColumnifUpTimeread-onlycurrentThe time since the line link up.
1.3.6.1.4.1.890.1.5.13.5.13.15NodeimaStats
1.3.6.1.4.1.890.1.5.13.5.13.15.1TableimaPvcStatsTablenot-accessiblecurrentThe table displays IMA Group PVC status. This table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1RowimaPvcStatsEntrynot-accessiblecurrentAn entry of imaPvcStatsTable.
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1.1ColumnimaPvcStatsGroupIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1.2ColumnimaPvcStatsVpiread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1.3ColumnimaPvcStatsVciread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1.4ColumnimaPvcStatsTxPacketsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1.5ColumnimaPvcStatsRxPacketsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1.6ColumnimaPvcStatsTxUnicastread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1.7ColumnimaPvcStatsRxUnicastread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1.8ColumnimaPvcStatsTxMulticastread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1.9ColumnimaPvcStatsRxMulticastread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1.10ColumnimaPvcStatsTxBroadcastread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1.11ColumnimaPvcStatsRxBroadcastread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1.12ColumnimaPvcStatsTxDiscardread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.1.1.13ColumnimaPvcStatsRxDiscardread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.2TableimaGroupStatsTablenot-accessiblecurrentThe table displays IMA Group status. This table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.15.2.1RowimaGroupStatsEntrynot-accessiblecurrentAn entry of imaGroupStatsTable.
1.3.6.1.4.1.890.1.5.13.5.13.15.2.1.1ColumnimaGroupStatsGroupIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.2.1.2ColumnimaGroupStatsTxCellsread-onlycurrentTx Cells since reset
1.3.6.1.4.1.890.1.5.13.5.13.15.2.1.3ColumnimaGroupStatsRxCellsread-onlycurrentRx Cells since reset
1.3.6.1.4.1.890.1.5.13.5.13.15.2.1.4ColumnimaGroupStatsTxRateread-onlycurrentTx data rate in Bytes/s
1.3.6.1.4.1.890.1.5.13.5.13.15.2.1.5ColumnimaGroupStatsRxRateread-onlycurrentRx data rate in Bytes/s
1.3.6.1.4.1.890.1.5.13.5.13.15.2.1.6ColumnimaGroupStatsCrcErrread-onlycurrentCRC errors since reset
1.3.6.1.4.1.890.1.5.13.5.13.15.3TableimaGroupCurrDayTablenot-accessiblecurrentThe table displays IMA Group Current Day Counters. This table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.15.3.1RowimaGroupCurrDayEntrynot-accessiblecurrentAn entry of imaGroupCurrDayTable.
1.3.6.1.4.1.890.1.5.13.5.13.15.3.1.1ColumnimaGroupCurrDayGroupIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.3.1.2ColumnimaGroupCurrDayUnavailSecsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.3.1.3ColumnimaGroupCurrDayNeNumFailuresread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.3.1.4ColumnimaGroupCurrDayFeNumFailuresread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4TableimaLinkCurrDayTablenot-accessiblecurrentThe table displays IMA Link Current Day Counters. This table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1RowimaLinkCurrDayEntrynot-accessiblecurrentAn entry of imaLinkCurrDayTable.
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.1ColumnimaLinkCurrDayIfindexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.2ColumnimaLinkCurrDayImaViolationsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.3ColumnimaLinkCurrDayOifAnomaliesread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.4ColumnimaLinkCurrDayNeSevErroredSecsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.5ColumnimaLinkCurrDayFeSevErroredSecsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.6ColumnimaLinkCurrDayNeUnavailSecsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.7ColumnimaLinkCurrDayFeUnavailSecsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.8ColumnimaLinkCurrDayNeTxUnusableSecsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.9ColumnimaLinkCurrDayNeRxUnusableSecsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.10ColumnimaLinkCurrDayFeTxUnusableSecsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.11ColumnimaLinkCurrDayFeRxUnusableSecsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.12ColumnimaLinkCurrDayNeTxNumFailuresread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.13ColumnimaLinkCurrDayNeRxNumFailuresread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.14ColumnimaLinkCurrDayFeTxNumFailuresread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.15ColumnimaLinkCurrDayFeRxNumFailuresread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.16ColumnimaLinkCurrDayTxStuffsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.4.1.17ColumnimaLinkCurrDayRxStuffsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.5TableimaGroupConfReadyTablenot-accessiblecurrentThe table displays IMA Group Configuration Ready status. This table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.15.5.1RowimaGroupConfReadyEntrynot-accessiblecurrentAn entry of imaGroupConfReadyTable.
1.3.6.1.4.1.890.1.5.13.5.13.15.5.1.1ColumnimaGroupConfReadyIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.5.1.2ColumnimaGroupConfReadyStateread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.6TableimaGroupStatusTablenot-accessiblecurrentThe table displays IMA Group status. This table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.15.6.1RowimaGroupStatusEntrynot-accessiblecurrentAn entry of imaGroupConfReadyTable.
1.3.6.1.4.1.890.1.5.13.5.13.15.6.1.1ColumnimaGroupStatusGroupIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.15.6.1.2ColumnimaGroupStatusTxPayloadRateread-onlycurrentMaximum tx data rate in kbps
1.3.6.1.4.1.890.1.5.13.5.13.15.6.1.3ColumnimaGroupStatusRxPayloadRateread-onlycurrentMaximum rx data rate in kbps
1.3.6.1.4.1.890.1.5.13.5.13.16Nodee1Stats
1.3.6.1.4.1.890.1.5.13.5.13.16.1Tablee1CurrDayTablenot-accessiblecurrentThe table displays E1 Port Current Day Counters. This table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.16.1.1Rowe1CurrDayEntrynot-accessiblecurrentAn entry of e1CurrDayTable.
1.3.6.1.4.1.890.1.5.13.5.13.16.1.1.1Columne1CurrDayIfindexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.16.1.1.2Columne1CurrDayLCVsread-onlycurrentLine Coding Violation
1.3.6.1.4.1.890.1.5.13.5.13.16.1.1.3Columne1CurrDayPCVsread-onlycurrentPath Coding Violation, a.k.a. Error Blocks
1.3.6.1.4.1.890.1.5.13.5.13.16.1.1.4Columne1CurrDayESsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.16.1.1.5Columne1CurrDaySESsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.16.1.1.6Columne1CurrDayUASsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.16.2Tablee1StatusTablenot-accessiblecurrentThe table displays E1 Port Status. This table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.16.2.1Rowe1StatusEntrynot-accessiblecurrentAn entry of e1StatusTable.
1.3.6.1.4.1.890.1.5.13.5.13.16.2.1.1Columne1StatusIfindexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.16.2.1.2Columne1StatusTxPayloadRateread-onlycurrentMaximum tx data rate in kbps
1.3.6.1.4.1.890.1.5.13.5.13.16.2.1.3Columne1StatusRxPayloadRateread-onlycurrentMaximum rx data rate in kbps
1.3.6.1.4.1.890.1.5.13.5.13.16.2.1.4Columne1StatusUpTimeread-onlycurrentThe uplink time.
1.3.6.1.4.1.890.1.5.13.5.13.18NodeloopguardStats
1.3.6.1.4.1.890.1.5.13.5.13.18.1TableloopguardStatsTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.13.18.1.1RowloopguardStatsEntrynot-accessiblecurrentAn entry of loopguardStatsTable.
1.3.6.1.4.1.890.1.5.13.5.13.18.1.1.1ColumnloopguardStatsPortread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.18.1.1.2ColumnloopguardStatsPortStatusread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.18.1.1.3ColumnloopguardStatsLoopguardStatusread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.18.1.1.4ColumnloopguardStatsTotalTxPacketsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.18.1.1.5ColumnloopguardStatsTotalRxPacketsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.18.1.1.6ColumnloopguardStatsBadPacketsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.18.1.1.7ColumnloopguardStatsShutdownTimeread-onlycurrentseconds
1.3.6.1.4.1.890.1.5.13.5.13.19NodestpStats
1.3.6.1.4.1.890.1.5.13.5.13.19.1TablestpPortStatsTablenot-accessiblecurrentThe table displays STP Port Status. This table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.19.1.1RowstpPortStatsEntrynot-accessiblecurrentAn entry of stpPortStatsTable.
1.3.6.1.4.1.890.1.5.13.5.13.19.1.1.1ColumnstpPortStatusread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.19.2NodestpStatsPortNum
1.3.6.1.4.1.890.1.5.13.5.13.19.2.1ScalarstpStatsPortNumForwardingread-onlycurrentthe number of forwarding ports. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.19.2.2ScalarstpStatsPortNumLearningread-onlycurrentthe number of learning ports. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.19.2.3ScalarstpStatsPortNumDiscardingread-onlycurrentthe number of discarding ports. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.19.2.4ScalarstpStatsPortNumDownread-onlycurrentthe number of link-down ports. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.20NodegbondStats
1.3.6.1.4.1.890.1.5.13.5.13.20.1TablegbondStatsTablenot-accessiblecurrentThe table displays G.Bond Status. This table is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.20.1.1RowgbondStatsEntrynot-accessiblecurrentAn entry of gbondStatsTable.
1.3.6.1.4.1.890.1.5.13.5.13.20.1.1.1ColumngbondStatsNameread-onlycurrentAn administratively assigned string, which identifies the bonding group.
1.3.6.1.4.1.890.1.5.13.5.13.20.1.1.2ColumngbondStatsUpRateread-onlycurrentThe current up stream rate.
1.3.6.1.4.1.890.1.5.13.5.13.20.1.1.3ColumngbondStatsDownRateread-onlycurrentThe current down stream rate.
1.3.6.1.4.1.890.1.5.13.5.13.20.1.1.4ColumngbondStatsMemberread-onlycurrentIndicate if the port is a member port of the bonding group. Each bit in the octet specifies a port from MSB to LSB. for example: 32(hex) = 50(dec) = 00110010(b…
1.3.6.1.4.1.890.1.5.13.5.13.20.1.1.5ColumngbondStatslinkupread-onlycurrentIndicate if the link status of port is bidirectional. Each bit in the octet specifies a port from MSB to LSB. for example: 32(hex) = 50(dec) = 00110010(bin) me…
1.3.6.1.4.1.890.1.5.13.5.13.20.1.1.6ColumngbondStatsTxread-onlycurrentIndicate if the link status of port is Tx only. Each bit in the octet specifies a port from MSB to LSB. for example: 32(hex) = 50(dec) = 00110010(bin) means th…
1.3.6.1.4.1.890.1.5.13.5.13.20.1.1.7ColumngbondStatsRxread-onlycurrentIndicate if the link status of port is Rx only. Each bit in the octet specifies a port from MSB to LSB. for example: 32(hex) = 50(dec) = 00110010(bin) means th…
1.3.6.1.4.1.890.1.5.13.5.13.20.1.1.8ColumngbondStatslinkdownread-onlycurrentIndicate if the link status of the port is down. Each bit in the octet specifies a port from MSB to LSB. for example: 32(hex) = 50(dec) = 00110010(bin) means t…
1.3.6.1.4.1.890.1.5.13.5.13.20.1.1.9ColumngbondStatsTCModeread-onlycurrentTransmission Convergence layer.
1.3.6.1.4.1.890.1.5.13.5.13.20.1.1.10ColumngbondStatsTxRateread-onlycurrentThe tx packet rate.
1.3.6.1.4.1.890.1.5.13.5.13.20.1.1.11ColumngbondStatsRxRateread-onlycurrentThe rx packet rate.
1.3.6.1.4.1.890.1.5.13.5.13.21Nodevdsl2Stats
1.3.6.1.4.1.890.1.5.13.5.13.21.1TablevdslChanExtendedTablenot-accessiblecurrentThe table displays VDSL2 channel Status. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.21.1.1RowvdslChanExtendedEntrynot-accessiblecurrentAn entry of vdslChanExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.13.21.1.1.1Columnvdsl2ChanPrevTxRateread-onlycurrentUnits: kbps
1.3.6.1.4.1.890.1.5.13.5.13.21.1.1.2Columnvdsl2ChanActualRaModeread-onlycurrentThe actual RA mode. The possible values are: fixedRateMode(1) - Fixed rate mode raInit(2) - Adaptive rate mode at initialization dynamicRa(3) - Dynamic rate ad…
1.3.6.1.4.1.890.1.5.13.5.13.21.1.1.3Columnvdsl2ChanRetransmissionModeread-onlycurrentRTX_USED operational data parameter. The possible values are: rtxInUse(1) - RTX in use. rtxForbidden(2) - RTX not in use because RTX_MODE = FORBIDDEN. rtxNotSu…
1.3.6.1.4.1.890.1.5.13.5.13.21.1.1.4Columnvdsl2ChanRetransmissionOverheadread-onlycurrentExpected retransmission overhead in G.inp due to REIN and SHINE noise. Unit is kbps.
1.3.6.1.4.1.890.1.5.13.5.13.21.1.1.5Columnvdsl2ChanGinpFramingTyperead-onlycurrentThis parameter is equal to zero if G.inp is not enabled. If G.inp is enabled, it reports the framing type in use (1, 2, 3, or 4).
1.3.6.1.4.1.890.1.5.13.5.13.21.1.1.6Columnvdsl2ChanActualInpAgainstREINread-onlycurrentThis parameter reports the actual INP against REIN noise. Unit is 1/2 symbol.
1.3.6.1.4.1.890.1.5.13.5.13.21.1.1.7Columnvdsl2ChanReedSolomonCodeWordPerDturead-onlycurrentThis parameter reports the number of RS codewords per DTU. It is equal to D when PhyR is enabled.
1.3.6.1.4.1.890.1.5.13.5.13.21.2TablevdslPerfDataExtendedTablenot-accessiblecurrentThe table displays VDSL2 Performance Data. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.21.2.1RowvdslPerfDataExtendedEntrynot-accessiblecurrentAn entry of vdslPerfDataExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.13.21.2.1.1ColumnvdslPerfDataFECsread-onlycurrentUnits: kbps
1.3.6.1.4.1.890.1.5.13.5.13.21.3TablevdslChanPerfDataExtendedTablenot-accessiblecurrentThe table displays VDSL2 Channel Performance Data. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.21.3.1RowvdslChanPerfDataExtendedEntrynot-accessiblecurrentAn entry of vdslPerfDataExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.13.21.3.1.1ColumnvdslChanPerfDataCorrectedBlksread-onlycurrentCount of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data. Units: blocks
1.3.6.1.4.1.890.1.5.13.5.13.21.3.1.2ColumnvdslChanPerfDataUncorrectBlksread-onlycurrentCount of all blocks received with uncorrectable errors since agent reset. Units: blocks
1.3.6.1.4.1.890.1.5.13.5.13.21.3.1.3ColumnvdslChanPerfDataCodeViolationsread-onlycurrentCount of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied ov…
1.3.6.1.4.1.890.1.5.13.5.13.21.4Nodexdsl2PMEx
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1Nodexdsl2PMLineEx
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1Tablexdsl2PMLineCurrExtendedTablenot-accessiblecurrentThe table displays VDSL2 Line Current Performance Data. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1Rowxdsl2PMLineCurrExtendedEntrynot-accessiblecurrentAn entry of xdsl2PMLineCurrExtendedEntry.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.1Columnxdsl2PMLCurr15MMonitoredTimeread-onlycurrentUnits: seconds
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.2Columnxdsl2PMLCurr15MLofsread-onlycurrentCount of the number of Loss of Framing failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.3Columnxdsl2PMLCurr15MLolsread-onlycurrentCount of the number of Loss of Link failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.4Columnxdsl2PMLCurr15MLolread-onlycurrentCount of the number of Loss of Link failures.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.5Columnxdsl2PMLCurr15MLprsread-onlycurrentCount of the number of Loss of Power failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.6Columnxdsl2PMLCurr15MLprread-onlycurrentCount of the number of Loss of Power failures.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.7Columnxdsl2PMLCurr15MInitsread-onlycurrentCount of the line initialization attempts since link up. Includes both successful and failed attempts.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.8Columnxdsl2PMLCurr1DayMonitoredTimeread-onlycurrentUnits: seconds
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.9Columnxdsl2PMLCurr1DayLofsread-onlycurrentCount of the number of Loss of Framing failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.10Columnxdsl2PMLCurr1DayLolsread-onlycurrentCount of the number of Loss of Link failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.11Columnxdsl2PMLCurr1DayLolread-onlycurrentCount of the number of Loss of Link failures.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.12Columnxdsl2PMLCurr1DayLprsread-onlycurrentCount of the number of Loss of Power failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.13Columnxdsl2PMLCurr1DayLprread-onlycurrentCount of the number of Loss of Power failures.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.14Columnxdsl2PMLCurr1DayInitsread-onlycurrentCount of the line initialization attempts since link up. Includes both successful and failed attempts.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.15Columnxdsl2PMLSinceLinkInmEqInpread-onlycurrentThe INM Equivalent Inp histogram since last link up. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1 t…
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.16Columnxdsl2PMLSinceLinkInmIATread-onlycurrentThe INM Inter Arrival Time histogram since last link up. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting from…
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.17Columnxdsl2PMLSinceLinkInmMEread-onlycurrentThe INM total measurement since last link up. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the value …
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.18Columnxdsl2PMLCurr15MInmEqInpread-onlycurrentThe INM Equivalent Inp histogram during this 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting …
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.19Columnxdsl2PMLCurr15MInmIATread-onlycurrentThe INM Inter Arrival Time histogram during this 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for support…
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.20Columnxdsl2PMLCurr15MInmMEread-onlycurrentThe INM total measurement during this 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of th…
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.21Columnxdsl2PMLCurr1DayInmEqInpread-onlycurrentThe INM Equivalent Inp histogram during this 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting f…
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.22Columnxdsl2PMLCurr1DayInmIATread-onlycurrentThe INM Inter Arrival Time histogram during this 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporti…
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.23Columnxdsl2PMLCurr1DayInmMEread-onlycurrentThe INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the…
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.24Columnxdsl2PMLSinceInitLofsread-onlycurrentCount of seconds of Loss of Framing failures since initialized.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.25Columnxdsl2PMLSinceInitLolsread-onlycurrentCount of seconds of Loss of Link failures since initialized.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.26Columnxdsl2PMLSinceInitLolread-onlycurrentCount of the number of Loss of Link failures since initialized.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.27Columnxdsl2PMLSinceInitLprsread-onlycurrentCount of seconds of Loss of Power failures since initialized.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.28Columnxdsl2PMLSinceInitLprread-onlycurrentCount of the number of Loss of Power failures since initialized.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.1.1.29Columnxdsl2PMLSinceInitInitsread-onlycurrentCount of the line initialization attempts since initialized. Includes both successful and failed attempts.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.2Tablexdsl2PMLineHist15MinExtendedTablenot-accessiblecurrentThe table displays VDSL2 Line History 15 minute Performance Data. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.2.1Rowxdsl2PMLineHist15MinExtendedEntrynot-accessiblecurrentAn entry of xdsl2PMLineHist15MinExtendedEntry.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.2.1.1Columnxdsl2PMLHist15MLofsread-onlycurrentCount of the number of Loss of Framing failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.2.1.2Columnxdsl2PMLHist15MLolsread-onlycurrentCount of the number of Loss of Link failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.2.1.3Columnxdsl2PMLHist15MLolread-onlycurrentCount of the number of Loss of Link failures.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.2.1.4Columnxdsl2PMLHist15MLprsread-onlycurrentCount of the number of Loss of Power failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.2.1.5Columnxdsl2PMLHist15MLprread-onlycurrentCount of the number of Loss of Power failures.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.2.1.6Columnxdsl2PMLHist15MInitsread-onlycurrentCount of the line initialization attempts since link up. Includes both successful and failed attempts.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.2.1.7Columnxdsl2PMLHist15MInmEqInpread-onlycurrentThe INM Equivalent Inp histogram during 15min interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from …
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.2.1.8Columnxdsl2PMLHist15MInmIATread-onlycurrentThe INM Inter Arrival Time histogram during 15min interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting f…
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.2.1.9Columnxdsl2PMLHist15MInmMEread-onlycurrentThe INM total measurement during 15min interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the val…
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.3Tablexdsl2PMLineHist1DayExtendedTablenot-accessiblecurrentThe table displays VDSL2 Line History 1 day Performance Data. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.3.1Rowxdsl2PMLineHist1DayExtendedEntrynot-accessiblecurrentAn entry of xdsl2PMLineHist1DayExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.3.1.1Columnxdsl2PMLHist1DLofsread-onlycurrentCount of the number of Loss of Framing failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.3.1.2Columnxdsl2PMLHist1DLolsread-onlycurrentCount of the number of Loss of Link failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.3.1.3Columnxdsl2PMLHist1DLolread-onlycurrentCount of the number of Loss of Link failures.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.3.1.4Columnxdsl2PMLHist1DLprsread-onlycurrentCount of the number of Loss of Power failures since link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.3.1.5Columnxdsl2PMLHist1DLprread-onlycurrentCount of the number of Loss of Power failures.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.3.1.6Columnxdsl2PMLHist1DInitsread-onlycurrentCount of the line initialization attempts since link up. Includes both successful and failed attempts.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.3.1.7Columnxdsl2PMLHist1DInmEqInpread-onlycurrentThe INM Equivalent Inp histogram during 1Day interval. An array of 68 octets (each 4 octets means amount of a bin of histogram), designed for supporting from 1…
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.3.1.8Columnxdsl2PMLHist1DInmIATread-onlycurrentThe INM Inter Arrival Time histogram during 1Day interval. An array of 32 octets (each 4 octets means amount of a bin of histogram), designed for supporting fr…
1.3.6.1.4.1.890.1.5.13.5.13.21.4.1.3.1.9Columnxdsl2PMLHist1DInmMEread-onlycurrentThe INM total measurement during this 1Day interval. This indication occurs every time a data symbol is processed by the Impulse Noise Sensor. The range of the…
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2Nodexdsl2PMLineChannelEx
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1Tablexdsl2PMChCurrExtendedTablenot-accessiblecurrentThe table displays VDSL2 Channel Current Performance Data. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1Rowxdsl2PMChCurrExtendedEntrynot-accessiblecurrentAn entry of xdsl2PMChHist15MinExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.1Columnxdsl2PMChCurr15MUncorrectBlksread-onlycurrentCount of all blocks received with uncorrectable errors on this channel within the current 15 minute interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.2Columnxdsl2PMChCurr1DayUncorrectBlksread-onlycurrentCount of all blocks received with uncorrectable errors on this channel within the current 7 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.3Columnxdsl2PMChSinceLinkRtxread-onlycurrentNumber of codewords retransmitted since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.4Columnxdsl2PMChCurr15MRtxread-onlycurrentNumber of codewords retransmitted during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.5Columnxdsl2PMChCurr1DayRtxread-onlycurrentNumber of codewords retransmitted during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.6Columnxdsl2PMChSinceLinkRtxCorrectedread-onlycurrentNumber of codewords corrected through retransmission since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.7Columnxdsl2PMChCurr15MRtxCorrectedread-onlycurrentNumber of codewords corrected through retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.8Columnxdsl2PMChCurr1DayRtxCorrectedread-onlycurrentNumber of codewords corrected through retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.9Columnxdsl2PMChSinceLinkRtxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.10Columnxdsl2PMChCurr15MRtxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.11Columnxdsl2PMChCurr1DayRtxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.12Columnxdsl2PMChSinceLinkLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.13Columnxdsl2PMChCurr15MLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.14Columnxdsl2PMChCurr1DayLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.15Columnxdsl2PMChSinceLinkMinEFTRread-onlycurrentLowest EFTR observed since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.16Columnxdsl2PMChCurr15MMinEFTRread-onlycurrentLowest EFTR observed in the current interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.17Columnxdsl2PMChCurr1DayMinEFTRread-onlycurrentLowest EFTR observed in the current interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.18Columnxdsl2PMChSinceLinkErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC i??i?? 2(i??V16) since last link up.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.19Columnxdsl2PMChCurr15MErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC i??i?? 2(i??V16) during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.2.1.1.20Columnxdsl2PMChCurr1DayErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC i??i?? 2(i??V16) during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3Nodexdsl2PMChannelEx
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.1Tablexdsl2PMChHist15MinExtendedTablenot-accessiblecurrentThe table displays VDSL2 Channel History 15 minute Performance Data. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.1.1Rowxdsl2PMChHist15MinExtendedEntrynot-accessiblecurrentAn entry of xdsl2PMChHist15MinExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.1.1.1Columnxdsl2PMChHist15MUncorrectBlksread-onlycurrentCount of all blocks received with uncorrectable errors on this channel within the history 15 minute interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.1.1.2Columnxdsl2PMChHist15MRtxread-onlycurrentNumber of codewords retransmitted during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.1.1.3Columnxdsl2PMChHist15MRtxCorrectedread-onlycurrentNumber of codewords corrected through retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.1.1.4Columnxdsl2PMChHist15MRtxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.1.1.5Columnxdsl2PMChHist15MLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.1.1.6Columnxdsl2PMChHist15MMinEFTRread-onlycurrentLowest EFTR observed in the current interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.1.1.7Columnxdsl2PMChHist15MErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC i??i?? 2(i??V16) during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.2Tablexdsl2PMChHist1DExtendedTablenot-accessiblecurrentThe table displays VDSL2 Channel History 1 day Performance Data. This table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.2.1Rowxdsl2PMChHist1DExtendedEntrynot-accessiblecurrentAn entry of xdsl2PMChHist1DExtendedTable.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.2.1.1Columnxdsl2PMChHist1DUncorrectBlksread-onlycurrentCount of all blocks received with uncorrectable errors on this channel within the history 1 day interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.2.1.2Columnxdsl2PMChHist1DayRtxread-onlycurrentNumber of codewords retransmitted during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.2.1.3Columnxdsl2PMChHist1DayRtxCorrectedread-onlycurrentNumber of codewords corrected through retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.2.1.4Columnxdsl2PMChHist1DayRtxUncorrectedread-onlycurrentNumber of codewords left uncorrected after retransmission during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.2.1.5Columnxdsl2PMChHist1DayLEFTRsread-onlycurrentLow Error-Free Throughput Rate Seconds during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.2.1.6Columnxdsl2PMChHist1DayMinEFTRread-onlycurrentLowest EFTR observed in the current interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.4.3.2.1.7Columnxdsl2PMChHist1DayErrFreeBitsread-onlycurrentThe number of bits belonging to correct DTUs leaving the Rx PMS-TC i??i?? 2(i??V16) during this interval.
1.3.6.1.4.1.890.1.5.13.5.13.21.5Tablexdsl2LineBandExtTablenot-accessiblecurrentThis table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.21.5.1Rowxdsl2LineBandExtEntrynot-accessiblecurrentAn entry of xdsl2LineBandExtTable.
1.3.6.1.4.1.890.1.5.13.5.13.21.5.1.1Columnxdsl2LineBandTxPowerread-onlycurrentXdsl line band Tx power (in unit of 0.1 Dbm, -1280 indicates that power is empty)
1.3.6.1.4.1.890.1.5.13.5.13.21.5.1.2Columnxdsl2LineBandRxPowerread-onlycurrentXdsl line band Rx power (in unit of 0.1 Dbm, -1280 indicates that power is empty)
1.3.6.1.4.1.890.1.5.13.5.13.22NodemldStats
1.3.6.1.4.1.890.1.5.13.5.13.22.1ScalarmldStatsV1QueryInCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.2ScalarmldStatsV1ReportInCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.3ScalarmldStatsV1DoneInCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.4ScalarmldStatsV1QueryInDropCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.5ScalarmldStatsV1ReportInDropCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.6ScalarmldStatsV1DoneInDropCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.7ScalarmldStatsV1QueryOutCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.8ScalarmldStatsV1ReportOutCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.9ScalarmldStatsV1DoneOutCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.10ScalarmldStatsV2QueryInCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.11ScalarmldStatsV2ReportInCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.12ScalarmldStatsV2QueryInDropCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.13ScalarmldStatsV2ReportInDropCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.14ScalarmldStatsV2QueryOutCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.15ScalarmldStatsV2ReportOutCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.16ScalarmldNumOfActiveGroupsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.17TablemldGroupTablenot-accessiblecurrentThis table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.22.17.1RowmldGroupEntrynot-accessiblecurrentAn entry of mldGroupTable.
1.3.6.1.4.1.890.1.5.13.5.13.22.17.1.1ColumnmldGroupVidread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.17.1.2ColumnmldGroupIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.17.1.3ColumnmldGroupNumOfMembersread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.17.1.4ColumnmldGroupMemberPortsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.17.1.5ColumnmldGroupNumOfActiveUsersread-onlycurrentNumber of active users.
1.3.6.1.4.1.890.1.5.13.5.13.22.18TablemldGroupPortTablenot-accessiblecurrentThis table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.22.18.1RowmldGroupPortEntrynot-accessiblecurrentAn entry of mldGroupPortTable.
1.3.6.1.4.1.890.1.5.13.5.13.22.18.1.1ColumnmldGroupPortVidread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.18.1.2ColumnmldGroupPortIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.18.1.3ColumnmldGroupPortSourceIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.19TablemldPortCtrlPduTablenot-accessiblecurrentThis table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.22.19.1RowmldPortCtrlPduEntrynot-accessiblecurrentAn entry of mldPortCtrlPduTable.
1.3.6.1.4.1.890.1.5.13.5.13.22.19.1.1ColumnmldPortCtrlPduQueryCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.19.1.2ColumnmldPortCtrlPduReportCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.19.1.3ColumnmldPortCtrlPduLeaveCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.19.1.4ColumnmldPortNumOfActiveGroupsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.19.1.5ColumnmldPortCtrlPduV1SuccessJoinCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.19.1.6ColumnmldPortCtrlPduV1UnsuccJoinCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.19.1.7ColumnmldPortCtrlPduGenQryCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.19.1.8ColumnmldPortCtrlPduSpecQryCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.19.1.9ColumnmldPortCtrlPduV2SuccessReportCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.19.1.10ColumnmldPortCtrlPduV2UnsuccReportCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.19.1.11ColumnmldPortCtrlPduInvalidCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20TablemldVlanStatsTablenot-accessiblecurrentThis table is supported by R5.06 and later versions.
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1RowmldVlanStatsuEntrynot-accessiblecurrentAn entry of mldVlanStatsTable.
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.1ColumnmldVlanStatsVlanIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.2ColumnmldVlanStatsNumOfActiveGroupsread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.3ColumnmldVlanStatsQueryPortread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.4ColumnmldVlanStatsQuerierIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.5ColumnmldVlanStatsV1QueryInCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.6ColumnmldVlanStatsV1ReportInCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.7ColumnmldVlanStatsV1DoneInCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.8ColumnmldVlanStatsV1QueryInDropCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.9ColumnmldVlanStatsV1ReportInDropCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.10ColumnmldVlanStatsV1DoneInDropCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.11ColumnmldVlanStatsV1QueryOutCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.12ColumnmldVlanStatsV1ReportOutCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.13ColumnmldVlanStatsV1DoneOutCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.14ColumnmldVlanStatsV2QueryInCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.15ColumnmldVlanStatsV2ReportInCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.16ColumnmldVlanStatsV2QueryInDropCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.17ColumnmldVlanStatsV2ReportInDropCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.18ColumnmldVlanStatsV2QueryOutCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.22.20.1.19ColumnmldVlanStatsV2ReportOutCntread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.23NodemacFFStats
1.3.6.1.4.1.890.1.5.13.5.13.23.1TablemacFFArpStatusUplinkTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.13.23.1.1RowmacFFArpStatusUplinkEntrynot-accessiblecurrentThe entry of macFFArpStatusUplinkTable.
1.3.6.1.4.1.890.1.5.13.5.13.23.1.1.1ColumnmacFFArpStatusUplinkIpAddrread-onlycurrentmacFF arp ip address from uplink
1.3.6.1.4.1.890.1.5.13.5.13.23.1.1.2ColumnmacFFArpStatusUplinkMacAddrread-onlycurrentmacFF arp mac address from uplink
1.3.6.1.4.1.890.1.5.13.5.13.23.1.1.3ColumnmacFFArpStatusUplinkMacVidread-onlycurrentmacFF arp vid from uplink
1.3.6.1.4.1.890.1.5.13.5.13.23.2TablemacFFArpStatusSlotTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.13.23.2.1RowmacFFArpStatusSlotEntrynot-accessiblecurrentThe entry of macFFArpStatusSlotTable.
1.3.6.1.4.1.890.1.5.13.5.13.23.2.1.1ColumnmacFFArpStatusSlotIpAddrread-onlycurrentmacFF arp ip address from subscrib port
1.3.6.1.4.1.890.1.5.13.5.13.23.2.1.2ColumnmacFFArpStatusSlotMacAddrread-onlycurrentmacFF arp mac address from subscrib port
1.3.6.1.4.1.890.1.5.13.5.13.23.2.1.3ColumnmacFFArpStatusSlotMacVidread-onlycurrentmacFF arp vid from subscrib port
1.3.6.1.4.1.890.1.5.13.5.13.23.2.1.4ColumnmacFFArpStatusSlotPortread-onlycurrentmacFF arp learnt subscrib port
1.3.6.1.4.1.890.1.5.13.5.13.23.3TablemacFFArpCntUplinkTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.13.23.3.1RowmacFFArpCntUplinkEntrynot-accessiblecurrentThe entry of macFFArpCntUplinkTable.
1.3.6.1.4.1.890.1.5.13.5.13.23.3.1.1ColumnmacFFArpCntUplinkReqRxread-onlycurrentmacFF arp request rx counter from uplink
1.3.6.1.4.1.890.1.5.13.5.13.23.3.1.2ColumnmacFFArpCntUplinkReqTxread-onlycurrentmacFF arp request tx counter from uplink
1.3.6.1.4.1.890.1.5.13.5.13.23.3.1.3ColumnmacFFArpCntUplinkReqRxDropread-onlycurrentmacFF arp request rx drop counter from uplink
1.3.6.1.4.1.890.1.5.13.5.13.23.3.1.4ColumnmacFFArpCntUplinkRpyRxread-onlycurrentmacFF arp reply rx counter from uplink
1.3.6.1.4.1.890.1.5.13.5.13.23.3.1.5ColumnmacFFArpCntUplinkRpyTxread-onlycurrentmacFF arp reply tx counter from uplink
1.3.6.1.4.1.890.1.5.13.5.13.23.3.1.6ColumnmacFFArpCntUplinkRpyRxDropread-onlycurrentmacFF arp reply rx drop counter from uplink
1.3.6.1.4.1.890.1.5.13.5.13.23.4TablemacFFArpCntPortTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.13.23.4.1RowmacFFArpCntPortEntrynot-accessiblecurrentThe entry of macFFArpCntPortTable.
1.3.6.1.4.1.890.1.5.13.5.13.23.4.1.1ColumnmacFFArpCntPortReqRxread-onlycurrentmacFF arp request rx counter from subscrib port
1.3.6.1.4.1.890.1.5.13.5.13.23.4.1.2ColumnmacFFArpCntPortReqTxread-onlycurrentmacFF arp request tx counter from subscrib port
1.3.6.1.4.1.890.1.5.13.5.13.23.4.1.3ColumnmacFFArpCntPortReqRxDropread-onlycurrentmacFF arp request rx drop counter from subscrib port
1.3.6.1.4.1.890.1.5.13.5.13.23.4.1.4ColumnmacFFArpCntPortRpyRxread-onlycurrentmacFF arp reply rx counter from subscrib port
1.3.6.1.4.1.890.1.5.13.5.13.23.4.1.5ColumnmacFFArpCntPortRpyTxread-onlycurrentmacFF arp reply tx counter from subscrib port
1.3.6.1.4.1.890.1.5.13.5.13.23.4.1.6ColumnmacFFArpCntPortRpyRxDropread-onlycurrentmacFF reply rx drop counter from subscrib port
1.3.6.1.4.1.890.1.5.13.5.13.24NodeimageStats
1.3.6.1.4.1.890.1.5.13.5.13.24.1ScalarsysBootUpFwIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.24.2ScalarsysBootUpFwVersionread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.13.24.3TablesysFlashFwInfoTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.13.24.3.1RowsysFlashFwInfoEntrynot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.13.24.3.1.1ColumnsysFlashFwIndexnot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.13.24.3.1.2ColumnsysFlashFwVersionread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.14Nodeclear
1.3.6.1.4.1.890.1.5.13.5.14.1ScalarcounterClearTargetread-writecurrentThis object is supported by R1.02 and later versions. This managed object is used for identify the target on which the counter would be cleared. The target is …
1.3.6.1.4.1.890.1.5.13.5.14.2ScalarcounterClearOpsread-writecurrentThis object is supported by R1.02 and later versions. The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 1: clear int…
1.3.6.1.4.1.890.1.5.13.5.14.3ScalarcounterClearVpiread-writecurrentThis object is supported by R1.02 and later versions. VPI of the pvc whose counters would be cleared.
1.3.6.1.4.1.890.1.5.13.5.14.4ScalarcounterClearVciread-writecurrentThis object is supported by R1.02 and later versions. VCI of the pvc whose counters would be cleared.
1.3.6.1.4.1.890.1.5.13.5.14.5NodeimaClear
1.3.6.1.4.1.890.1.5.13.5.14.5.1ScalarimaClearOpsread-writecurrentThis object is supported by R5.03 and later versions. The corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 0: clear pvc…
1.3.6.1.4.1.890.1.5.13.5.14.5.2ScalarimaClearTargetGroupIndexread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.14.5.3ScalarimaClearTargetLinkIndexread-writecurrent1~8, link index in the group
1.3.6.1.4.1.890.1.5.13.5.14.5.4ScalarimaClearTargetVpiread-writecurrentThis object is supported by R5.03 and later versions. VPI of the pvc whose counters would be cleared.
1.3.6.1.4.1.890.1.5.13.5.14.5.5ScalarimaClearTargetVciread-writecurrentThis object is supported by R5.03 and later versions. VCI of the pvc whose counters would be cleared.
1.3.6.1.4.1.890.1.5.13.5.14.5.6ScalarimaClearTargetIfindexread-writecurrentThis object is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.14.6NodevoipClear
1.3.6.1.4.1.890.1.5.13.5.14.6.1ScalarvoipClearOpsread-writecurrentThe corresponding bit is set to 1 to start the operation. The various bit positions are: BIT 0: clear call detail records BIT 1: clear H248 statistics
1.3.6.1.4.1.890.1.5.13.5.14.6.2ScalarvoipClearH248TargetInterfaceread-writecurrentInterface Id
1.3.6.1.4.1.890.1.5.13.5.15Nodecluster
1.3.6.1.4.1.890.1.5.13.5.15.1ScalarclusterEnableread-writecurrentEnable/disable clustering. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.15.2ScalarclusterNameread-writecurrentName of the cluster. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.15.3ScalarclusterMemberPasswordread-writecurrentPassword of the member. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.15.4ScalarclusterVlanread-writecurrentSetting cluster VLAN ID. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.15.5NodeclusterCandidate
1.3.6.1.4.1.890.1.5.13.5.15.5.1ScalarclusterCandidateFlushread-writecurrentSetting the object to be 1 to flush the candidate table and re-discover candidates. This object is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.15.5.2TableclusterCandidateTablenot-accessiblecurrentA table that contains information about cluster candidates. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.15.5.2.1RowclusterCandidateEntrynot-accessiblecurrentAn entry of clusterCandidateTable.
1.3.6.1.4.1.890.1.5.13.5.15.5.2.1.1ColumnclusterCandidateMacAddrread-onlycurrentThe MAC address of the candidate.
1.3.6.1.4.1.890.1.5.13.5.15.5.2.1.2ColumnclusterCandidateHostNameread-onlycurrentThe host name of the candidate.
1.3.6.1.4.1.890.1.5.13.5.15.5.2.1.3ColumnclusterCandidateModelNameread-onlycurrentThe model name of the candidate.
1.3.6.1.4.1.890.1.5.13.5.15.5.2.1.4ColumnclusterCandidateDeviceTyperead-onlycurrentThe device type of the candidate.
1.3.6.1.4.1.890.1.5.13.5.15.6TableclusterMemberConfTablenot-accessiblecurrentA table that contains configuration about cluster members. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.15.6.1RowclusterMemberConfEntrynot-accessiblecurrentAn entry of clusterMemberConfTable.
1.3.6.1.4.1.890.1.5.13.5.15.6.1.1ColumnclusterMemberConfIdread-onlycurrentThe identity of the entry.
1.3.6.1.4.1.890.1.5.13.5.15.6.1.2ColumnclusterMemberConfMacAddrread-writecurrentThe MAC address of the member which will join the cluster.
1.3.6.1.4.1.890.1.5.13.5.15.6.1.3ColumnclusterMemberConfPasswdread-writecurrentThe password of the member which will join the cluster.
1.3.6.1.4.1.890.1.5.13.5.15.7TableclusterMemberStatusTablenot-accessiblecurrentA table that contains information about cluster members. This table is supported by R3.00 and later versions.
1.3.6.1.4.1.890.1.5.13.5.15.7.1RowclusterMemberStatusEntrynot-accessiblecurrentAn entry of clusterMemberStatusTable.
1.3.6.1.4.1.890.1.5.13.5.15.7.1.1ColumnclusterMemberStatusStateread-onlycurrentThe state of the member.
1.3.6.1.4.1.890.1.5.13.5.15.7.1.2ColumnclusterMemberStatusMacAddrread-onlycurrentThe MAC address of the member.
1.3.6.1.4.1.890.1.5.13.5.15.7.1.3ColumnclusterMemberStatusHostNameread-onlycurrentThe host name of the member.
1.3.6.1.4.1.890.1.5.13.5.15.7.1.4ColumnclusterMemberStatusModelNameread-onlycurrentThe model name of the member.
1.3.6.1.4.1.890.1.5.13.5.15.7.1.5ColumnclusterMemberStatusDeviceTyperead-onlycurrentThe device type of the member.
1.3.6.1.4.1.890.1.5.13.5.15.7.1.6ColumnclusterMemberStatusFWVersionread-onlycurrentThe F/W version of the member.
1.3.6.1.4.1.890.1.5.13.5.15.7.1.7ColumnclusterMemberStatusUpTimeread-onlycurrentThe time since the member joined the cluster.
1.3.6.1.4.1.890.1.5.13.5.16Nodevoip
1.3.6.1.4.1.890.1.5.13.5.16.1NodevoipArp
1.3.6.1.4.1.890.1.5.13.5.16.1.1ScalarvoipArpFlushTargetread-writecurrentFlush arp entries in the specified slot.
1.3.6.1.4.1.890.1.5.13.5.16.1.2ScalarvoipArpFlushOpsread-writecurrentSet the object to 1 to start flushing.
1.3.6.1.4.1.890.1.5.13.5.16.1.3TablevoipArpShowTablenot-accessiblecurrentDisplay ARP entries learnt in specified slot.
1.3.6.1.4.1.890.1.5.13.5.16.1.3.1RowvoipArpShowEntrynot-accessiblecurrentAn entry of voipArpShowTable.
1.3.6.1.4.1.890.1.5.13.5.16.1.3.1.1ColumnvoipArpShowIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.1.3.1.2ColumnvoipArpShowMacread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.1.3.1.3ColumnvoipArpShowTimerread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.2NodevoipSip
1.3.6.1.4.1.890.1.5.13.5.16.2.1ScalarmaxNumOfVoipNumberPlanread-onlycurrentThe maximum number of VoIP number plan supported by the system.
1.3.6.1.4.1.890.1.5.13.5.16.2.2TablevoipNumberPlanTablenot-accessiblecurrentConfigure numbering plan entry of specified index in specified payphone charging table.
1.3.6.1.4.1.890.1.5.13.5.16.2.2.1RowvoipNumberPlanEntrynot-accessiblecurrentAn entry of voipNumberPlanTable.
1.3.6.1.4.1.890.1.5.13.5.16.2.2.1.1ColumnvoipNumberPlanNameread-onlycurrentNumbering plan table name.
1.3.6.1.4.1.890.1.5.13.5.16.2.2.1.2ColumnvoipNumberPlanIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.2.2.1.3ColumnvoipNumberPlanPatternread-createcurrentup to 47 characters, allow digit, '*', and '#' characters and meaning characters that include 'x', '.', '|' and range format characters that include '~', ',' a…
1.3.6.1.4.1.890.1.5.13.5.16.2.2.1.4ColumnvoipNumberPlanRuleread-createcurrentAllowed characters are 0~9, and '\c' stand for country code, '\d' stand for national destination code, '\1' stand for matched string enclosed by the parenthesi…
1.3.6.1.4.1.890.1.5.13.5.16.2.2.1.5ColumnvoipNumberPlanRowStatusread-createcurrentThis object is used to create a new entry or delete an existing entry in this table.
1.3.6.1.4.1.890.1.5.13.5.16.2.3ScalarmaxNumOfVoipDialPlanread-onlycurrentThe maximum number of VoIP dial plan supported by the system.
1.3.6.1.4.1.890.1.5.13.5.16.2.4TablevoipDialPlanTablenot-accessiblecurrentConfigure dial plan related configuration. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.2.4.1RowvoipDialPlanEntrynot-accessiblecurrentAn entry of voipDialPlanTable.
1.3.6.1.4.1.890.1.5.13.5.16.2.4.1.1ColumnvoipDialPlanNameread-onlycurrentDial plan table name.
1.3.6.1.4.1.890.1.5.13.5.16.2.4.1.2ColumnvoipDialPlanPatternread-createcurrentonly 63 DTMF characters that include digits, '*', '#' and meaning characters that include 'x', '.', '|' and characters of range format that include '~', ',' an…
1.3.6.1.4.1.890.1.5.13.5.16.2.4.1.3ColumnvoipDialPlanNumOfPrefixCutread-createcurrentThe number of digits at the beginning of the dialed number that will be removed.
1.3.6.1.4.1.890.1.5.13.5.16.2.4.1.4ColumnvoipDialPlanSipServerread-createcurrentSIP profile name.
1.3.6.1.4.1.890.1.5.13.5.16.2.4.1.5ColumnvoipDialPlanPrefixAddDigitsread-createcurrentOnly digit characters are allowed or use two quotation mark to indicate no prefix added digits.
1.3.6.1.4.1.890.1.5.13.5.16.2.4.1.6ColumnvoipDialPlanNumberOfInterdigitread-createcurrentThe number of dialing digits.
1.3.6.1.4.1.890.1.5.13.5.16.2.4.1.7ColumnvoipDialPlanInterdigitTimeoutread-createcurrentInter-digit timeout in seconds.
1.3.6.1.4.1.890.1.5.13.5.16.2.4.1.8ColumnvoipDialPlanRowStatusread-createcurrentThis object is used to create a new entry or delete an existing entry in this table.
1.3.6.1.4.1.890.1.5.13.5.16.2.5ScalarmaxNumOfVoipKeyPatternread-onlycurrentThe maximum number of VoIP key patterns supported by the system.
1.3.6.1.4.1.890.1.5.13.5.16.2.6TablevoipKeyPatternTablenot-accessiblecurrentConfigure key pattern related configuration. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.2.6.1RowvoipKeyPatternEntrynot-accessiblecurrentAn entry of voipKeyPatternTable.
1.3.6.1.4.1.890.1.5.13.5.16.2.6.1.1ColumnvoipKeyPatternNameread-onlycurrentKey pattern table name.
1.3.6.1.4.1.890.1.5.13.5.16.2.6.1.2ColumnvoipKeyPatternServiceTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.2.6.1.3ColumnvoipKeyPatternPatternread-createcurrentAllowed characters are 0~9, *, and #.
1.3.6.1.4.1.890.1.5.13.5.16.2.6.1.4ColumnvoipKeyPatternRowStatusread-createcurrentThis object is used to create a new entry or delete an existing entry in this table.
1.3.6.1.4.1.890.1.5.13.5.16.2.7NodevoipLocalCall
1.3.6.1.4.1.890.1.5.13.5.16.2.7.1ScalarvoipLocalCallSyncread-writecurrentSet the object to 1 to synchronize msc local call file with SIP linecard.
1.3.6.1.4.1.890.1.5.13.5.16.2.7.2ScalarvoipLocalCallEnterTimeread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.16.2.7.3ScalarvoipLocalCallExitTimeread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.16.2.8ScalarmaxNumOfVoipLocalHelpread-onlycurrentThe maximum number of VoIP local help entries supported by the system.
1.3.6.1.4.1.890.1.5.13.5.16.2.9TablevoipLocalHelpTablenot-accessiblecurrentConfigure telephone number of specified index in specified local help table. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.2.9.1RowvoipLocalHelpEntrynot-accessiblecurrentAn entry of voipLocalHelpTable.
1.3.6.1.4.1.890.1.5.13.5.16.2.9.1.1ColumnvoipLocalHelpNameread-onlycurrentLocal help table name.
1.3.6.1.4.1.890.1.5.13.5.16.2.9.1.2ColumnvoipLocalHelpIndexread-onlycurrentIndex number.
1.3.6.1.4.1.890.1.5.13.5.16.2.9.1.3ColumnvoipLocalHelpTelNumberread-createcurrentOnly digits are allowed.
1.3.6.1.4.1.890.1.5.13.5.16.2.9.1.4ColumnvoipLocalHelpRowStatusread-createcurrentThis object is used to create a new entry or delete an existing entry in this table.
1.3.6.1.4.1.890.1.5.13.5.16.3TablevoipIpSetTablenot-accessiblecurrentConfigure IP address and VLAN ID of specified slot.
1.3.6.1.4.1.890.1.5.13.5.16.3.1RowvoipIpSetEntrynot-accessiblecurrentAn entry of voipIpSetTable.
1.3.6.1.4.1.890.1.5.13.5.16.3.1.1ColumnvoipIpSetIpread-writecurrentIP address.
1.3.6.1.4.1.890.1.5.13.5.16.3.1.2ColumnvoipIpSetVidread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.16.3.1.3ColumnvoipIpSetMaskread-writecurrentNetwork mask.
1.3.6.1.4.1.890.1.5.13.5.16.4TablevoipDnsTablenot-accessiblecurrentConfigure DNS server IP of specified slot.
1.3.6.1.4.1.890.1.5.13.5.16.4.1RowvoipDnsEntrynot-accessiblecurrentAn entry of voipDnsTable.
1.3.6.1.4.1.890.1.5.13.5.16.4.1.1ColumnvoipDnsIpread-writecurrentIP address.
1.3.6.1.4.1.890.1.5.13.5.16.7ScalarmaxNumOfVoipRouteread-onlycurrentThe maximum number of VoIP routing entries in a slot.
1.3.6.1.4.1.890.1.5.13.5.16.8TablevoipRouteTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.16.8.1RowvoipRouteEntrynot-accessiblecurrentAn entry of voipRouteTable.
1.3.6.1.4.1.890.1.5.13.5.16.8.1.1ColumnvoipRouteSlotread-onlycurrentSpecified slot number.
1.3.6.1.4.1.890.1.5.13.5.16.8.1.2ColumnvoipRouteIpread-onlycurrentIP address.
1.3.6.1.4.1.890.1.5.13.5.16.8.1.3ColumnvoipRouteGatewayread-onlycurrentGateway IP.
1.3.6.1.4.1.890.1.5.13.5.16.8.1.4ColumnvoipRouteMaskread-onlycurrentNetwork mask.
1.3.6.1.4.1.890.1.5.13.5.16.8.1.5ColumnvoipRouteMetricread-createcurrentMetric number of the route.
1.3.6.1.4.1.890.1.5.13.5.16.8.1.6ColumnvoipRouteRowStatusread-createcurrentThis object is used to create a new entry or delete an existing entry in this table.
1.3.6.1.4.1.890.1.5.13.5.16.9ScalarvoipCountryCoderead-writecurrentConfigure country code (information) for VoIP services.
1.3.6.1.4.1.890.1.5.13.5.16.10NodevoipH248
1.3.6.1.4.1.890.1.5.13.5.16.10.1TablevoipH248MgConfTablenot-accessiblecurrentThis table is used to create MG instance at specified slot with specified MGC profile. This table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.10.1.1RowvoipH248MgConfEntrynot-accessiblecurrentAn entry in voipH248MgConfTable.
1.3.6.1.4.1.890.1.5.13.5.16.10.1.1.1ColumnvoipH248MgConfSlotread-onlycurrentLine card slot number.
1.3.6.1.4.1.890.1.5.13.5.16.10.1.1.2ColumnvoipH248MgConfNameread-onlycurrentMG name.
1.3.6.1.4.1.890.1.5.13.5.16.10.1.1.3ColumnvoipH248MgConfEnableread-createcurrentEnable/disable MG.
1.3.6.1.4.1.890.1.5.13.5.16.10.1.1.4ColumnvoipH248MgConfH248Profileread-createcurrentH.248 profile name.
1.3.6.1.4.1.890.1.5.13.5.16.10.1.1.5ColumnvoipH248MgConfPortread-createcurrentMG port number.
1.3.6.1.4.1.890.1.5.13.5.16.10.1.1.6ColumnvoipH248MgConfRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table..
1.3.6.1.4.1.890.1.5.13.5.16.10.2TablevoipH248InterfaceConfTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.16.10.2.1RowvoipH248InterfaceConfEntrynot-accessiblecurrentAn entry in voipH248InterfaceConfTable.
1.3.6.1.4.1.890.1.5.13.5.16.10.2.1.1ColumnvoipH248InterfaceConfIdread-onlycurrentLine card slot number.
1.3.6.1.4.1.890.1.5.13.5.16.10.2.1.2ColumnvoipH248InterfaceConfMgNameread-writecurrentMG name.
1.3.6.1.4.1.890.1.5.13.5.16.10.2.1.3ColumnvoipH248InterfaceConfMgEnableread-writecurrentEnable/disable MG.
1.3.6.1.4.1.890.1.5.13.5.16.10.2.1.4ColumnvoipH248InterfaceConfH248Profileread-writecurrentH.248 profile name.
1.3.6.1.4.1.890.1.5.13.5.16.10.2.1.5ColumnvoipH248InterfaceConfPortread-writecurrentMG port number.
1.3.6.1.4.1.890.1.5.13.5.16.10.2.1.6ColumnvoipH248InterfaceConfIpread-writecurrentInterface Ip
1.3.6.1.4.1.890.1.5.13.5.16.10.2.1.7ColumnvoipH248InterfaceConfMasklenread-writecurrentnetwork mask, 0~32
1.3.6.1.4.1.890.1.5.13.5.16.10.2.1.8ColumnvoipH248InterfaceConfVidread-writecurrent1~4094
1.3.6.1.4.1.890.1.5.13.5.16.10.2.1.9ColumnvoipH248InterfaceConfPrimaryread-writecurrentslot id
1.3.6.1.4.1.890.1.5.13.5.16.10.2.1.10ColumnvoipH248InterfaceConfSecondaryread-writecurrentslot id
1.3.6.1.4.1.890.1.5.13.5.16.10.2.1.11ColumnvoipH248InterfaceConfBhcaPeakread-writecurrentpeak call attempt allowance in one second , 0~30
1.3.6.1.4.1.890.1.5.13.5.16.10.2.1.12ColumnvoipH248InterfaceConfBhcaAverageread-writecurrentaverage call attempt allowance in one hour, 0~60000
1.3.6.1.4.1.890.1.5.13.5.16.10.3TablevoipH248SlotConfTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.16.10.3.1RowvoipH248SlotConfEntrynot-accessiblecurrentAn entry in voipH248ConfSlotTable.
1.3.6.1.4.1.890.1.5.13.5.16.10.3.1.1ColumnvoipH248SlotConfIdread-onlycurrentLine card slot number.
1.3.6.1.4.1.890.1.5.13.5.16.10.3.1.2ColumnvoipH248SlotConfMasterIp1read-writecurrentMaster Ip
1.3.6.1.4.1.890.1.5.13.5.16.10.3.1.3ColumnvoipH248SlotConfMasterIp2read-writecurrentMaster Ip
1.3.6.1.4.1.890.1.5.13.5.16.10.3.1.4ColumnvoipH248SlotConfOpmoderead-writecurrentOpmode
1.3.6.1.4.1.890.1.5.13.5.16.10.3.1.5ColumnvoipH248SlotConf8021pPrioread-writecurrent802.1p bit for H.248 internal message packet, 0 ~ 7
1.3.6.1.4.1.890.1.5.13.5.16.10.3.1.6ColumnvoipH248SlotConfPriorityDscpread-writecurrentDSCP for H.248 internal message packet, 0 ~ 63
1.3.6.1.4.1.890.1.5.13.5.16.10.4TablevoipH248SlaveConfTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.16.10.4.1RowvoipH248SlaveConfEntrynot-accessiblecurrentAn entry in voipH248InterfaceSlaveTable.
1.3.6.1.4.1.890.1.5.13.5.16.10.4.1.1ColumnvoipH248SlaveConfInterfaceIdread-onlycurrentLine card slot number.
1.3.6.1.4.1.890.1.5.13.5.16.10.4.1.2ColumnvoipH248SlaveConfSlaveIdread-writecurrentSlave Member
1.3.6.1.4.1.890.1.5.13.5.16.10.4.1.3ColumnvoipH248SlaveConfSlaveIpread-writecurrentSlave Ip
1.3.6.1.4.1.890.1.5.13.5.16.10.5NodevoipH248Localcall
1.3.6.1.4.1.890.1.5.13.5.16.10.5.1ScalarvoipH248LocalcallEnterTimeread-writecurrentThe time to enter localcall utility after MGC missing. 1~60, in unit of minutes
1.3.6.1.4.1.890.1.5.13.5.16.10.5.2ScalarvoipH248LocalcallExistTimeread-writecurrentThe time to exist localcall utility after MGC reconnected. 1~60, in unit of minutes
1.3.6.1.4.1.890.1.5.13.5.16.11NodevoipCountryCodeParam
1.3.6.1.4.1.890.1.5.13.5.16.11.1Scalarlawread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.2Scalarimpedanceread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.3ScalarloopCurrentread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.4ScalartaxTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.5ScalarringFrequencyread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.6ScalarringAmplituderead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.7ScalarringOnTime1read-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.8ScalarringOffTime1read-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.9ScalarringOnTime2read-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.10ScalarringOffTime2read-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.11ScalarflashMinread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.12ScalarflashMaxread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.13ScalarbreakMinread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.14ScalarbreakMaxread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.15ScalarmakeMinread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.16ScalarmakeMaxread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.17ScalarinterDigitMinread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.18ScalarmeterFrequencyread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.19ScalarmeterOnTimeread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.20ScalarmeterOffTimeread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.21ScalarcidTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.22ScalarpayloadTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.23ScalarfirstTASTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.24ScalarsecondTASTyperead-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.25ScalarfirstTASIntervalread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.26ScalarsecondTASIntervalread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.27ScalarstartToRingread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.28ScalardialToneread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.29ScalarringBackToneread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.30ScalarbusyToneread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.31ScalarcongestionToneread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.32ScalarcallWaitingTone1read-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.33ScalarcallWaitingTone2read-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.34ScalarspecialDialToneread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.35ScalarhowlerToneread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.36ScalarwarningToneread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.37ScalarconfirmationToneread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.38ScalarholdingToneread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.39ScalarnumberUnobtainableToneread-onlycurrentThis object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.11.40ScalarrecallDialToneread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.11.41ScalarspecialInformationToneread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.12NodevoipPots
1.3.6.1.4.1.890.1.5.13.5.16.12.1TablevoipPotsRingTablenot-accessiblecurrentThis table is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.12.1.1RowvoipPotsRingEntrynot-accessiblecurrentAn entry in voipPotsRingEntry.
1.3.6.1.4.1.890.1.5.13.5.16.12.1.1.1ColumnvoipPotsRingConfIdread-onlycurrentindex
1.3.6.1.4.1.890.1.5.13.5.16.12.1.1.2ColumnvoipPotsRingConfNameDefvalread-writecurrentConfigure pots ring name to use default value. 1 : enable 2 : disable
1.3.6.1.4.1.890.1.5.13.5.16.12.1.1.3ColumnvoipPotsRingConfNameread-writecurrentname
1.3.6.1.4.1.890.1.5.13.5.16.12.1.1.4ColumnvoipPotsRingConfPatternDefvalread-writecurrentConfigure pots ring pattern to use default value. 1 : enable 2 : disable
1.3.6.1.4.1.890.1.5.13.5.16.12.1.1.5ColumnvoipPotsRingConfPatternOn1read-writecurrentfirst on time
1.3.6.1.4.1.890.1.5.13.5.16.12.1.1.6ColumnvoipPotsRingConfPatternOff1read-writecurrentfirst off time
1.3.6.1.4.1.890.1.5.13.5.16.12.1.1.7ColumnvoipPotsRingConfPatternOn2read-writecurrentsecond on time
1.3.6.1.4.1.890.1.5.13.5.16.12.1.1.8ColumnvoipPotsRingConfPatternOff2read-writecurrentsecond off time
1.3.6.1.4.1.890.1.5.13.5.16.12.1.1.9ColumnvoipPotsRingConfPatternOn3read-writecurrentthird on time
1.3.6.1.4.1.890.1.5.13.5.16.12.1.1.10ColumnvoipPotsRingConfPatternOff3read-writecurrentthird off time
1.3.6.1.4.1.890.1.5.13.5.16.12.2NodevoipPotsFlash
1.3.6.1.4.1.890.1.5.13.5.16.12.2.1ScalarvoipPotsFlashDefvalread-writecurrentConfigure pots flash to use default setting. 1 : enable 2 : disable
1.3.6.1.4.1.890.1.5.13.5.16.12.2.2ScalarvoipPotsFlashMinTimeread-writecurrentMinimum time of hook-flash detection period.
1.3.6.1.4.1.890.1.5.13.5.16.12.2.3ScalarvoipPotsFlashMaxTimeread-writecurrentMaximum time of hook-flash detection period.
1.3.6.1.4.1.890.1.5.13.5.16.12.3ScalarvoipPotsRingVoltageread-writecurrentThe ring output voltage of pots 25~90, in unit of Vrms. 0 means set to default value.
1.3.6.1.4.1.890.1.5.13.5.16.13NodevoipIfindexMap
1.3.6.1.4.1.890.1.5.13.5.16.13.1TablevoipInterfaceMapTablenot-accessiblecurrentA list of interface entries map voip interface indexes to interface indexes.
1.3.6.1.4.1.890.1.5.13.5.16.13.1.1RowvoipInterfaceMapEntrynot-accessiblecurrentAn entry in voipInterfaceMapTable.
1.3.6.1.4.1.890.1.5.13.5.16.13.1.1.1ColumnvoipIfIndexnot-accessiblecurrentvoip index interface
1.3.6.1.4.1.890.1.5.13.5.16.13.1.1.2ColumnifIndexValueread-onlycurrentMapped interface index value for a voip interface index.
1.3.6.1.4.1.890.1.5.13.5.16.13.2TablevoipIfTablenot-accessiblecurrentA list of interface entries map interface indexes to voip interface indexes.
1.3.6.1.4.1.890.1.5.13.5.16.13.2.1RowvoipIfEntrynot-accessiblecurrentAn entry in voipData2PotsIndexMapEntry.
1.3.6.1.4.1.890.1.5.13.5.16.13.2.1.1ColumnvoipIfIndexValueread-onlycurrentMapped voip interface index value for a interface index.
1.3.6.1.4.1.890.1.5.13.5.16.14NodevoipSingleIp
1.3.6.1.4.1.890.1.5.13.5.16.14.1NodevoipExtH248
1.3.6.1.4.1.890.1.5.13.5.16.14.1.1NodevoipExtH248InterfaceConf
1.3.6.1.4.1.890.1.5.13.5.16.14.1.1.1ScalarvoipExtH248InterfaceConfMgNameread-writecurrentMG name.
1.3.6.1.4.1.890.1.5.13.5.16.14.1.1.2ScalarvoipExtH248InterfaceConfMgEnableread-writecurrentEnable/disable MG.
1.3.6.1.4.1.890.1.5.13.5.16.14.1.1.3ScalarvoipExtH248InterfaceConfH248Profileread-writecurrentH.248 profile name.
1.3.6.1.4.1.890.1.5.13.5.16.14.1.1.4ScalarvoipExtH248InterfaceConfPortread-writecurrentMG port number.
1.3.6.1.4.1.890.1.5.13.5.16.14.1.1.5ScalarvoipExtH248InterfaceConfSignalIpread-writecurrentSignaling Ip
1.3.6.1.4.1.890.1.5.13.5.16.14.1.1.6ScalarvoipExtH248InterfaceConfSignalMasklenread-writecurrentSignaling network mask, 0~32
1.3.6.1.4.1.890.1.5.13.5.16.14.1.1.7ScalarvoipExtH248InterfaceConfSignalVidread-writecurrent1~4094
1.3.6.1.4.1.890.1.5.13.5.16.14.1.1.8ScalarvoipExtH248InterfaceConfMediaIpread-writecurrentMedia Ip
1.3.6.1.4.1.890.1.5.13.5.16.14.1.1.9ScalarvoipExtH248InterfaceConfMediaMasklenread-writecurrentMedia network mask, 0~32
1.3.6.1.4.1.890.1.5.13.5.16.14.1.1.10ScalarvoipExtH248InterfaceConfMediaVidread-writecurrent1~4094
1.3.6.1.4.1.890.1.5.13.5.16.14.1.1.11ScalarvoipExtH248InterfaceConfDnsIpread-writecurrentDNS Ip
1.3.6.1.4.1.890.1.5.13.5.16.14.1.1.12ScalarvoipExtH248InterfaceConfRegisterRetryread-writecurrentRegister retry time interval, in unit of minute. range is 1 to 1440.
1.3.6.1.4.1.890.1.5.13.5.16.14.1.2ScalarvoipExtH248InterfaceMaxNumOfVoipRouteread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.1.3TablevoipExtH248InterfaceRouteTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.1.3.1RowvoipExtH248InterfaceRouteEntrynot-accessiblecurrentAn entry of voipExtH248InterfaceRouteTable.
1.3.6.1.4.1.890.1.5.13.5.16.14.1.3.1.1ColumnvoipExtH248InterfaceRouteIpread-onlycurrentIP address.
1.3.6.1.4.1.890.1.5.13.5.16.14.1.3.1.2ColumnvoipExtH248InterfaceRouteGatewayread-onlycurrentGateway IP.
1.3.6.1.4.1.890.1.5.13.5.16.14.1.3.1.3ColumnvoipExtH248InterfaceRouteMaskread-onlycurrentNetwork mask.
1.3.6.1.4.1.890.1.5.13.5.16.14.1.3.1.4ColumnvoipExtH248InterfaceRouteMetricread-createcurrentMetric number of the route.
1.3.6.1.4.1.890.1.5.13.5.16.14.1.3.1.5ColumnvoipExtH248InterfaceRouteRowStatusread-createcurrentThis object is used to create a new entry or delete an existing entry in this table.
1.3.6.1.4.1.890.1.5.13.5.16.14.2NodevoipExtStats
1.3.6.1.4.1.890.1.5.13.5.16.14.2.1NodevoipExtH248InterfaceStat
1.3.6.1.4.1.890.1.5.13.5.16.14.2.1.1ScalarvoipExtH248InterfaceStatMgStateread-onlycurrentMg State
1.3.6.1.4.1.890.1.5.13.5.16.14.2.1.2ScalarvoipExtH248InterfaceStatPrimaryProtectionStateread-onlycurrentPrimary Protection State
1.3.6.1.4.1.890.1.5.13.5.16.14.2.1.3ScalarvoipExtH248InterfaceStatSecondaryProtectionStateread-onlycurrentSecondary Protection State
1.3.6.1.4.1.890.1.5.13.5.16.14.2.1.4ScalarvoipExtH248InterfaceStatRedundantStateread-onlycurrentRedundant State
1.3.6.1.4.1.890.1.5.13.5.16.14.2.1.5ScalarvoipExtH248InterfaceStatMgcIpread-onlycurrentMGC IP address.
1.3.6.1.4.1.890.1.5.13.5.16.14.2.1.6ScalarvoipExtH248InterfaceStatMgH248Macread-onlycurrentThe MAC used by megaco packets.
1.3.6.1.4.1.890.1.5.13.5.16.14.2.1.7ScalarvoipExtH248InterfaceStatLocalcallStatread-onlycurrentLocal call state.
1.3.6.1.4.1.890.1.5.13.5.16.14.2.2TablevoipExtH248MediaStatTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.2.2.1RowvoipExtH248MediaStatEntrynot-accessiblecurrentAn entry of voipExtH248MediaStatTable.
1.3.6.1.4.1.890.1.5.13.5.16.14.2.2.1.1ColumnvoipExtH248MediaStatSlotIdread-onlycurrentSlot ID
1.3.6.1.4.1.890.1.5.13.5.16.14.2.2.1.2ColumnvoipExtH248MediaStatPortCountread-onlycurrentport count
1.3.6.1.4.1.890.1.5.13.5.16.14.2.2.1.3ColumnvoipExtH248MediaStatStateread-onlycurrentstate
1.3.6.1.4.1.890.1.5.13.5.16.14.2.3TablevoipExtH248TerminationStatTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.2.3.1RowvoipExtH248TerminationStatEntrynot-accessiblecurrentAn entry of voipExtH248TerminationStatStateTable.
1.3.6.1.4.1.890.1.5.13.5.16.14.2.3.1.1ColumnvoipExtH248TerminationStatStateSlotIdread-onlycurrentMedia Card Id of the termination.
1.3.6.1.4.1.890.1.5.13.5.16.14.2.3.1.2ColumnvoipExtH248TerminationStatStatePortNumberread-onlycurrentPort number the termination.
1.3.6.1.4.1.890.1.5.13.5.16.14.2.3.1.3ColumnvoipExtH248TerminationStatNameread-onlycurrentTermination Name.
1.3.6.1.4.1.890.1.5.13.5.16.14.2.3.1.4ColumnvoipExtH248TerminationStatPhoneStateread-onlycurrentPhone State
1.3.6.1.4.1.890.1.5.13.5.16.14.2.3.1.5ColumnvoipExtH248TerminationStatCallServiceStateread-onlycurrentCall Service State
1.3.6.1.4.1.890.1.5.13.5.16.14.2.4NodevoipExtH248TerminationStatQuery
1.3.6.1.4.1.890.1.5.13.5.16.14.2.4.1ScalarvoipExtH248TerminationStatQueryTerminationNameread-writecurrentTermination Name
1.3.6.1.4.1.890.1.5.13.5.16.14.2.4.2ScalarvoipExtH248TerminationStatQuerySlotIdread-onlycurrentSlot Id
1.3.6.1.4.1.890.1.5.13.5.16.14.2.4.3ScalarvoipExtH248TerminationStatQueryPortNumberread-onlycurrentPort Number
1.3.6.1.4.1.890.1.5.13.5.16.14.2.4.4ScalarvoipExtH248TerminationStatQueryPhoneStateread-onlycurrentPhone State
1.3.6.1.4.1.890.1.5.13.5.16.14.2.4.5ScalarvoipExtH248TerminationStatQueryCallServiceStateread-onlycurrentCallService State
1.3.6.1.4.1.890.1.5.13.5.16.14.3NodevoipExtSipProfile
1.3.6.1.4.1.890.1.5.13.5.16.14.3.1ScalarvoipExtMaxNumOfSipProfilesread-onlycurrentThe maximum number of SIP profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2TablevoipExtSipProfileTablenot-accessiblecurrentThis table includes SIP protocol related configuration. This table is supported by R4.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1RowvoipExtSipProfileEntrynot-accessiblecurrentAn entry in voipExtSipProfileTable.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.1ColumnvoipExtSipProfileNameread-onlycurrentThis object is used by the SIP profile table in order to identify a row of this table.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.2ColumnvoipExtSipProfileSipSvrread-createcurrentIP used for SIP registration or SIP domain name.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.3ColumnvoipExtSipProfileRegSvrread-createcurrentRegistration server IP or registration server domain name.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.4ColumnvoipExtSipProfileProxySvrread-createcurrentProxy server IP or proxy server doamin name.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.5ColumnvoipExtSipProfileSipPortread-createcurrentSIP UA port number.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.6ColumnvoipExtSipProfileRegSvrPortread-createcurrentRegistration server port number.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.7ColumnvoipExtSipProfileProxySvrPortread-createcurrentProxy server port number.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.8ColumnvoipExtSipProfilePbitread-createcurrent802.1p bit for SIP and RTP packet.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.9ColumnvoipExtSipProfileDscpread-createcurrentDSCP for SIP and RTP packet.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.10ColumnvoipExtSipProfileKeepAliveread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.11ColumnvoipExtSipProfilePrackread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.12ColumnvoipExtSipProfileSeread-createcurrentSession expiration time in seconds.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.13ColumnvoipExtSipProfileSwitchTyperead-createcurrentSwitch type
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.14ColumnvoipExtSipProfileRtpStartPortread-createcurrentstart of RTP port number. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.15ColumnvoipExtSipProfileRtpEndPortread-createcurrentend of RTP port number. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.16ColumnvoipExtSipProfileRegistrationExpireread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.17ColumnvoipExtSipProfileRegistrationExpireTimeread-createcurrentregistration expiration time under registered state, 120~65535 seconds
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.18ColumnvoipExtSipProfileRegistrationRetryTimeread-createcurrentregistration retry time under un-registered state, 120~900 seconds
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.19ColumnvoipExtSipProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.2.1.20ColumnvoipExtSipProfilePrefixAddDigitsread-onlycurrentThe prefix digits add before tel number
1.3.6.1.4.1.890.1.5.13.5.16.14.3.3ScalarvoipExtMaxNumOfSipCallSvcProfilesread-onlycurrentThe maximum number of SIP call service profiles supported by the system.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4TablevoipExtSipCallSvcProfileTablenot-accessiblecurrentThis table includes SIP call service related configuration. This table is supported by R4.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1RowvoipExtSipCallSvcProfileEntrynot-accessiblecurrentAn entry in sipCallSvcProfileTable.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.1ColumnvoipExtSipCallSvcProfileNameread-onlycurrentThis object is used by the SIP call service profile table in order to identify a row of this table.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.2ColumnvoipExtSipCallSvcProfileKeypatternread-createcurrentKey pattern table name. This object is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.3ColumnvoipExtSipCallSvcProfileDialPlanOnread-createcurrentPlease set CC, NDC, and dialplan table first.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.4ColumnvoipExtSipCallSvcProfileDialPlanCcread-createcurrentCountry code, only digit 0..9 are allowed.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.5ColumnvoipExtSipCallSvcProfileDialPlanNdcread-createcurrentNational destination code, only digit 0..9 are allowed.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.6ColumnvoipExtSipCallSvcProfileDialPlanTableread-createcurrentNumbering plan table name.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.7ColumnvoipExtSipCallSvcProfileDndOnread-createcurrentDo not Distrurb.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.8ColumnvoipExtSipCallSvcProfileDtmfread-createcurrentdtmf bypass : bypass DTMF tone dtmf rfc2833 : DTMF tone relay according to RFC2833 dtmf rfc2833like : DTMF tone relay by SIP INFO message, but RFC2833 payload …
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.9ColumnvoipExtSipCallSvcProfileDtmfRfc2833Payloadread-createcurrentdtmf rfc2833 payload type, 96~100
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.11ColumnvoipExtSipCallSvcProfileCallWaitOnread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.12ColumnvoipExtSipCallSvcProfileClipOnread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.13ColumnvoipExtSipCallSvcProfileClirOnread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.14ColumnvoipExtSipCallSvcProfileCallTransferOnread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.15ColumnvoipExtSipCallSvcProfileCallConferenceOnread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.16ColumnvoipExtSipCallSvcProfileFaxread-createcurrentfax g711 : FAX service pass through by ITU-T G.711 fax t38 : FAX service by ITU-T T.38 UDP
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.17ColumnvoipExtSipCallSvcProfileFirstDigitread-createcurrentfirst digit timeout. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.18ColumnvoipExtSipCallSvcProfileInterdigitread-createcurrentinter digit timeout. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.19ColumnvoipExtSipCallSvcProfileMatchdigitread-createcurrentmatch digit timeout. This MIB object is supported by R5.05 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.20ColumnvoipExtSipCallSvcProfileFlashread-createcurrentflash invite : send SIP INVITE message flash rfc2833 : flash relay according to RFC2833 flash rfc2833like : flash relay by SIP INFO message, but RFC2833 payloa…
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.21ColumnvoipExtSipCallSvcProfileFlashPatternread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.22ColumnvoipExtSipCallSvcProfileLocalCallOnread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.23ColumnvoipExtSipCallSvcProfileMWIOnread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.24ColumnvoipExtSipCallSvcProfileCentrexOnread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.3.4.1.25ColumnvoipExtSipCallSvcProfileRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in the table.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.5TablevoipExtSipCallSvcProfileLocalHelpTablenot-accessiblecurrentThis table is supported by R5.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.5.1RowvoipExtSipCallSvcProfileLocalHelpEntrynot-accessiblecurrentAn entry in sipCallSvcProfileLocalHelpTable.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.5.1.1ColumnvoipExtSipCallSvcProfileLocalHelpIndexread-onlycurrentIndex number.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.5.1.2ColumnvoipExtSipCallSvcProfileLocalHelpTableNameread-writecurrentLocal help table name.
1.3.6.1.4.1.890.1.5.13.5.16.14.3.5.1.3ColumnvoipExtSipCallSvcProfileLocalHelpTableTelread-writecurrentLocal help telephone number. Only digit characters are allowed. Note that sipCallSvcProfileLocalHelpTableName and sipCallSvcProfileLocalHelpTableTel must be se…
1.3.6.1.4.1.890.1.5.13.5.16.14.4ScalarvoipExtMaxNumOfVoipDialPlanread-onlycurrentThe maximum number of VoIP dial plan supported by the system.
1.3.6.1.4.1.890.1.5.13.5.16.14.5TablevoipExtDialPlanTablenot-accessiblecurrentConfigure dialing plan entry of specified index in specified payphone charging table.
1.3.6.1.4.1.890.1.5.13.5.16.14.5.1RowvoipExtDialPlanEntrynot-accessiblecurrentAn entry of voipExtDialPlanTable.
1.3.6.1.4.1.890.1.5.13.5.16.14.5.1.1ColumnvoipExtDialPlanNameread-onlycurrentDialing plan table name.
1.3.6.1.4.1.890.1.5.13.5.16.14.5.1.2ColumnvoipExtDialPlanIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.5.1.3ColumnvoipExtDialPlanPatternread-createcurrentup to 47 characters, allow digit, '*', and '#' characters and meaning characters that include 'x', '.', '|' and range format characters that include '~', ',' a…
1.3.6.1.4.1.890.1.5.13.5.16.14.5.1.4ColumnvoipExtDialPlanRuleread-createcurrentAllowed characters are 0~9, and '\c' stand for country code, '\d' stand for national destination code, '\1' stand for matched string enclosed by the parenthesi…
1.3.6.1.4.1.890.1.5.13.5.16.14.5.1.5ColumnvoipExtDialPlanRowStatusread-createcurrentThis object is used to create a new entry or delete an existing entry in this table.
1.3.6.1.4.1.890.1.5.13.5.16.14.6NodevoipExtSip
1.3.6.1.4.1.890.1.5.13.5.16.14.6.1NodevoipExtSipIp
1.3.6.1.4.1.890.1.5.13.5.16.14.6.1.1ScalarvoipExtSipSignalIpread-writecurrentSignaling Ip
1.3.6.1.4.1.890.1.5.13.5.16.14.6.1.2ScalarvoipExtSipSignalMaskread-writecurrentSignaling network mask, 0~32
1.3.6.1.4.1.890.1.5.13.5.16.14.6.1.3ScalarvoipExtSipSignalVidread-writecurrent1~4094
1.3.6.1.4.1.890.1.5.13.5.16.14.6.1.4ScalarvoipExtSipMediaIpread-writecurrentRTP IP
1.3.6.1.4.1.890.1.5.13.5.16.14.6.1.5ScalarvoipExtSipMediaMaskread-writecurrentRTP network mask, 0~32
1.3.6.1.4.1.890.1.5.13.5.16.14.6.1.6ScalarvoipExtSipMediaVidread-writecurrent1~4094
1.3.6.1.4.1.890.1.5.13.5.16.14.6.1.7ScalarvoipExtSipDnsIpread-writecurrentPrimary DNS IP. Set to '0.0.0.0' will clear both voipExtSipDnsIp and voipExtSipDnsIp2
1.3.6.1.4.1.890.1.5.13.5.16.14.6.1.8ScalarvoipExtSipDnsIp2read-writecurrentSecondary DNS IP. could not be set when voipExtSipDnsIp is '0.0.0.0', set voipExtSipDnsIp or voipExtSipDnsIp2 with '0.0.0.0' to clear.
1.3.6.1.4.1.890.1.5.13.5.16.14.6.2ScalarvoipExtSipMaxNumOfVoipRouteread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.6.3TablevoipExtSipRouteTablenot-accessiblecurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.6.3.1RowvoipExtSipRouteEntrynot-accessiblecurrentAn entry of voipExtSipRouteTable.
1.3.6.1.4.1.890.1.5.13.5.16.14.6.3.1.1ColumnvoipExtSipRouteIpread-onlycurrentIP address.
1.3.6.1.4.1.890.1.5.13.5.16.14.6.3.1.2ColumnvoipExtSipRouteGatewayread-onlycurrentGateway IP.
1.3.6.1.4.1.890.1.5.13.5.16.14.6.3.1.3ColumnvoipExtSipRouteMaskread-onlycurrentNetwork mask.
1.3.6.1.4.1.890.1.5.13.5.16.14.6.3.1.4ColumnvoipExtSipRouteMetricread-createcurrentMetric number of the route.
1.3.6.1.4.1.890.1.5.13.5.16.14.6.3.1.5ColumnvoipExtSipRouteRowStatusread-createcurrentThis object is used to create a new entry or delete an existing entry in this table.
1.3.6.1.4.1.890.1.5.13.5.16.14.6.4ScalarvoipExtSipRegcountread-writecurrentregister times per second, 1~255. 0 means off.
1.3.6.1.4.1.890.1.5.13.5.16.14.6.5ScalarvoipExtSipCptReorderread-writecurrentTimeout of re-order tone, 5~300
1.3.6.1.4.1.890.1.5.13.5.16.14.6.6ScalarvoipExtSipCptHowlerread-writecurrentTimeout of re-order tone, 5~300
1.3.6.1.4.1.890.1.5.13.5.16.14.6.7ScalarvoipExtSipCptAlertingread-writecurrentTimeout of re-order tone, 60~1200
1.3.6.1.4.1.890.1.5.13.5.16.14.6.8ScalarvoipExtSipPktLogread-writecurrentSIP packet log on/off
1.3.6.1.4.1.890.1.5.13.5.16.14.6.9ScalarvoipExtSipPktLogClearread-writecurrentSet 1 to clear SIP packet log
1.3.6.1.4.1.890.1.5.13.5.16.14.7TablevoipExtSipLineConfTablenot-accessiblecurrentThis table includes common attributes describing the VoIP line.
1.3.6.1.4.1.890.1.5.13.5.16.14.7.1RowvoipExtSipLineConfEntrynot-accessiblecurrentAn entry in voipExtSipLineConfTable.
1.3.6.1.4.1.890.1.5.13.5.16.14.7.1.1ColumnvoipExtSipLineConfHotlineOnread-writecurrent
1.3.6.1.4.1.890.1.5.13.5.16.14.7.1.2ColumnvoipExtSipLineConfHotlineNoread-writecurrentonly alphanumeric characters and '+' are allowed, or use two quotation marks () to clear the field. Note: '+' only is allowed at the first character
1.3.6.1.4.1.890.1.5.13.5.16.14.7.1.3ColumnvoipExtSipLineConfHotlineTimeoutread-writecurrent0~255 seconds, 0 means dialling immediately.
1.3.6.1.4.1.890.1.5.13.5.16.14.7.1.4ColumnvoipExtSipLineConfTaxread-writecurrentmetering mode
1.3.6.1.4.1.890.1.5.13.5.16.14.8TablevoipExtSipLineStatusTablenot-accessiblecurrentThe table displays VoIP line status. This table is supported by R4.01 and later versions.
1.3.6.1.4.1.890.1.5.13.5.16.14.8.1RowvoipExtSipLineStatusEntrynot-accessiblecurrentAn entry of voipExtSipLineStatTable.
1.3.6.1.4.1.890.1.5.13.5.16.14.8.1.1ColumnvoipExtSipLineStatusFxsStatusread-onlycurrentFXS status of the line.
1.3.6.1.4.1.890.1.5.13.5.16.14.8.1.2ColumnvoipExtSipLineStatusServiceStatusread-onlycurrentService status of the line.
1.3.6.1.4.1.890.1.5.13.5.16.14.8.1.3ColumnvoipExtSipLineStatusLocalcallStatusread-onlycurrentLocalcall status of the line.
1.3.6.1.4.1.890.1.5.13.5.17Nodeima
1.3.6.1.4.1.890.1.5.13.5.17.1TableimaGroupTablenot-accessiblecurrentThis table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.17.1.1RowimaGroupEntrynot-accessiblecurrentAn entry of imaGroupTable.
1.3.6.1.4.1.890.1.5.13.5.17.1.1.1ColumnimaGroupIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.17.1.1.2ColumnimaGroupClkModeread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.17.1.1.3ColumnimaGroupVersionread-createcurrent
1.3.6.1.4.1.890.1.5.13.5.17.2NodeimaGroupChan
1.3.6.1.4.1.890.1.5.13.5.17.2.1TableimaGroupChanNumTablenot-accessiblecurrentThis table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.17.2.1.1RowimaGroupChanNumEntrynot-accessiblecurrentAn entry of ImaGroupChanNumTable.
1.3.6.1.4.1.890.1.5.13.5.17.2.1.1.1ColumnimaGroupChanNumSlotread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.17.2.1.1.2ColumnimaGroupChanNumMaximumread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.17.2.1.1.3ColumnimaGroupChanNumCurrentTotalread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.17.2.1.1.4ColumnimaGroupChanNumCurrentPvcread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.17.2.1.1.5ColumnimaGroupChanNumCurrentDtpvcread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.17.2.2TableimaGroupPvcTablenot-accessiblecurrentThis table includes IMA Group PVC configuration. This table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.17.2.2.1RowimaGroupPvcEntrynot-accessiblecurrentAn entry of imaGroupPvcTable.
1.3.6.1.4.1.890.1.5.13.5.17.2.2.1.1ColumnimaGroupPvcGroupIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.17.2.2.1.2ColumnimaGroupPvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.2.1.3ColumnimaGroupPvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.2.1.4ColumnimaGroupPvcPvidread-onlycurrentPVID of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.2.1.5ColumnimaGroupPvcEncapread-createcurrentEncapsulation of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.2.1.6ColumnimaGroupPvcPriorityread-createcurrentpriority of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.2.1.7ColumnimaGruopPvcProfileread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.2.1.8ColumnimaGroupPvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.17.2.2.1.9ColumnimaGroupPvcEgressTagread-createcurrentEncapsulation of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.3TableimaGroupDtPvcTablenot-accessiblecurrentThis table includes IMA Group Double Tagging PVC configuration. This table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.17.2.3.1RowimaGroupDtPvcEntrynot-accessiblecurrentAn entry of imaGroupDtPvcTable.
1.3.6.1.4.1.890.1.5.13.5.17.2.3.1.1ColumnimaGroupDTPvcGroupIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.17.2.3.1.2ColumnimaGroupDtPvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.3.1.3ColumnimaGroupDtPvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.3.1.4ColumnimaGroupDtPvcSvidread-onlycurrents-tag of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.3.1.5ColumnimaGroupDtPvcCvidread-onlycurrentc-tag of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.3.1.6ColumnimaGroupDtPvcEncapread-createcurrentEncapsulation of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.3.1.7ColumnimaGroupDtPvcSPriorityread-createcurrents-priority of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.3.1.8ColumnimaGroupDtPvcCPriorityread-createcurrentc-priority of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.3.1.9ColumnimaGroupDtPvcProfileread-createcurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc.
1.3.6.1.4.1.890.1.5.13.5.17.2.3.1.10ColumnimaGroupDtPvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.17.3TableimaMgmtPvcTablenot-accessiblecurrentThis table includes IMA Management PVC configuration. This table is supported by R5.03 and later versions.
1.3.6.1.4.1.890.1.5.13.5.17.3.1RowimaMgmtPvcEntrynot-accessiblecurrentAn entry of imaMgmtPvcTable.
1.3.6.1.4.1.890.1.5.13.5.17.3.1.1ColumnimaMgmtPvcGroupIndexread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.17.3.1.2ColumnimaMgmtPvcVpiread-onlycurrentVPI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.3.1.3ColumnimaMgmtPvcVciread-onlycurrentVCI of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.3.1.4ColumnimaMgmtPvcPvidread-onlycurrentPVID of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.3.1.5ColumnimaMgmtPvcEncapread-writecurrentEncapsulation of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.3.1.6ColumnimaMgmtPvcPriorityread-writecurrentpriority of the pvc.
1.3.6.1.4.1.890.1.5.13.5.17.3.1.7ColumnimaMgmtPvcProfileread-writecurrentThe value of this object identifies the row in the atmProfileTable, which applies for this pvc.
1.3.6.1.4.1.890.1.5.13.5.17.3.1.8ColumnimaMgmtPvcRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table.
1.3.6.1.4.1.890.1.5.13.5.17.3.1.9ColumnimaMgmtPvcManagedIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.5.17.3.1.10ColumnimaMgmtPvcGatewayIpread-onlycurrent
1.3.6.1.4.1.890.1.5.13.7Nodeies5005
1.3.6.1.4.1.890.1.5.13.8Nodeies6000
Type Definitions
NameSyntaxStatusDescription
Unsigned64Counter64currentA non-negative 64-bit bit integer, without counter semantics.
Xdsl2ConfigRtxModeINTEGER { forbidden(0), preferred(1), forced(2), test(3) }currentForbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is supported by the far-end, it is enabled. Forced(2) - The line will only train if G998.4 can be enabled. Test(3) - G998.4 is enabled in test mode…
Xdsl2StatusActualRaModeINTEGER { none(0), fixedRateMode(1), raInit(2), dynamicRa(3), sosEnabled(4) }currentfixedRateMode(1) - Fixed rate mode raInit(2) - Adaptive rate mode at initialization dynamicRa(3) - Dynamic rate adaptation sosEnabled(4) - SOS enabled
Xdsl2StatusRtxModeINTEGER { none(0), rtxInUse(1), rtxForbidden(2), rtxNotSupportedXtuC(3), rtxNotSupportedXtuR(4), rtxNotSupportedBoth(5) }currentrtxInUse(1) - RTX in use. rtxForbidden(2) - RTX not in use because RTX_MODE = FORBIDDEN. rtxNotSupportedXtuC(3) - RTX not in use because it is not supported by the XTU-C. rtxNotSupportedXtuR(4) - RTX not in use because …
MIB Viewer