fs-MIB
1960 objects
The MIB module for fs-Series of FS.com Inc.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642 | Nodefs | |||
| 1.3.6.1.4.1.52642.2 | Nodefsnetworks | |||
| 1.3.6.1.4.1.52642.2.1 | NodefsNetworksMgt | |||
| 1.3.6.1.4.1.52642.2.1.45 | IdentityfsMIB | The MIB module for fs-Series of FS.com Inc. | ||
| 1.3.6.1.4.1.52642.2.1.45.1 | NodefsMIBObjects | |||
| 1.3.6.1.4.1.52642.2.1.45.1.1 | NodeswitchMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.1.2 | ScalarswitchNumber | read-only | current | The total number of switches present on this system. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3 | TableswitchInfoTable | not-accessible | current | Table of descriptive and status information about the switch units in this system. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1 | RowswitchInfoEntry | not-accessible | current | Table providing descriptions and status information for switch units. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1.1 | ColumnswUnitIndex | not-accessible | current | This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1.2 | ColumnswHardwareVer | read-only | current | Hardware version of the main board. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1.3 | ColumnswMicrocodeVer | read-only | current | Microcode version of the main board. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1.4 | ColumnswLoaderVer | read-only | current | Loader version of the main board. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1.6 | ColumnswOpCodeVer | read-only | current | Operation code version of the main board. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1.7 | ColumnswPortNumber | read-only | current | The number of ports on this switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1.8 | ColumnswPowerStatus | read-only | current | Indicates the switch using internalPower(1), redundantPower(2) or both(3) |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1.9 | ColumnswRoleInSystem | read-only | current | Indicates the switch is master(1), backupMaster(2) or slave(3) in this system. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1.10 | ColumnswSerialNumber | read-only | current | Serial number of the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1.13 | ColumnswServiceTag | read-only | current | Service tag serial-number of the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1.14 | ColumnswModelNumber | read-only | current | Model number of the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1.15 | ColumnswEpldVer | read-only | current | The EPLD version of the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.3.1.17 | ColumnswLinuxVersion | read-only | current | The Linux Kernel version of the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.4 | ScalarswitchOperState | read-only | current | Global operation state of the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.5 | NodeswitchProductId | |||
| 1.3.6.1.4.1.52642.2.1.45.1.1.5.1 | ScalarswProdName | read-only | current | The product name of this switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.5.2 | ScalarswProdManufacturer | read-only | current | The product manufacturer of this switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.5.3 | ScalarswProdDescription | read-only | current | The product description of this switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.5.4 | ScalarswProdVersion | read-only | current | The runtime code version of this switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.5.5 | ScalarswProdUrl | read-only | current | The URL of this switch, which we can connect through a web browser. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.5.6 | ScalarswIdentifier | read-only | current | A unique identifier of which switch in the chassis is currently being looked at. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.5.7 | ScalarswChassisServiceTag | read-only | current | The service tag of the chassis this switch resides in. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.6 | TableswitchIndivPowerTable | not-accessible | current | Table about the status of individual powers. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.6.1 | RowswitchIndivPowerEntry | not-accessible | current | Table about the status of individual power. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.6.1.1 | ColumnswIndivPowerUnitIndex | accessible-for-notify | current | This is defined as swUnitIndex. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.6.1.2 | ColumnswIndivPowerIndex | accessible-for-notify | current | 1 means internal power, 2 means external power. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.6.1.3 | ColumnswIndivPowerStatus | read-only | current | notPresent(1) means not present, green(2) means up, red(3) means down. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.7 | ScalarswitchJumboFrameStatus | read-write | current | enable(1) means the Jumbo Frame has enabled, disabled(2) means the Jumbo Frame has disabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.8 | NodematmMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.1.8.3 | ScalarmatmMacAddrAgingStatus | read-write | current | If this is enabled(1), the MAC address table will age out according to its timer. If this is disabled(2), the MAC address table will not age out. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.9 | TableswitchFanTable | not-accessible | current | The fan status table. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.9.1 | RowswitchFanEntry | not-accessible | current | A conceptual row of the switchFanTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.9.1.1 | ColumnswitchUnitIndex | accessible-for-notify | current | The unit of the switch for the stackable device. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.9.1.2 | ColumnswitchFanIndex | accessible-for-notify | current | The unit number of the fan. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.9.1.3 | ColumnswitchFanStatus | read-only | current | Indicating the status of the fan, 1:ok; 2:failure. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.9.1.6 | ColumnswitchFanOperSpeed | read-only | current | The operational value of the fan speed, measured in rpm (rotations per minute). |
| 1.3.6.1.4.1.52642.2.1.45.1.1.11 | TableswitchThermalTempTable | not-accessible | current | The table which collects switch temperature information. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.11.1 | RowswitchThermalTempEntry | not-accessible | current | A conceptual row of the switchThermalTempTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.11.1.1 | ColumnswitchThermalTempUnitIndex | accessible-for-notify | current | The unit of the switch for stackable device. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.11.1.2 | ColumnswitchThermalTempThermalIndex | accessible-for-notify | current | The thermal index of the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.11.1.3 | ColumnswitchThermalTempValue | read-only | current | The temperature of the device in degrees Celsius. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.12 | TableswitchThermalActionTable | not-accessible | current | The table for configuring the thermal action. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.12.1 | RowswitchThermalActionEntry | not-accessible | current | A conceptual row of the switchThermalActionTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.12.1.1 | ColumnswitchThermalActionUnitIndex | accessible-for-notify | current | The unit of the switch for stackable device. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.12.1.2 | ColumnswitchThermalActionThermalIndex | accessible-for-notify | current | The thermal index of the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.12.1.3 | ColumnswitchThermalActionIndex | accessible-for-notify | current | The action index of the switchTheramlActionTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.12.1.4 | ColumnswitchThermalActionRisingThreshold | read-create | current | The rising threshold of the switch temperature. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.12.1.5 | ColumnswitchThermalActionFallingThreshold | read-create | current | The falling threshold of the switch temperature. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.12.1.6 | ColumnswitchThermalActionAction | read-create | current | The action that will be taken when the temperature exceeds the rising threshold or falls below the falling threshold. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.12.1.7 | ColumnswitchThermalActionStatus | read-create | current | Set valid(1) to create an entry, Set Invalid(2) to delete an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.14 | ScalarswitchRenumberUnitID | read-write | current | The value renumber will automatically assign an ID to units in the stack; all UNIT IDs will be contiguous. The system configurations are not changed but the sy… |
| 1.3.6.1.4.1.52642.2.1.45.1.1.19 | TableswitchAlarmInputTable | not-accessible | current | Table about the status of alarm input. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.19.1 | RowswitchAlarmInputEntry | not-accessible | current | Table about the status of AlarmInput. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.19.1.1 | ColumnswAlarmUnitIndex | not-accessible | current | This is defined as swUnitIndex. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.19.1.2 | ColumnswAlarmInputType | not-accessible | current | The parameter indicates which alarm input event triggers the trap. |
| 1.3.6.1.4.1.52642.2.1.45.1.1.19.1.3 | ColumnswAlarmInputStatus | read-only | current | The parameter indicates which event triggers the trap. |
| 1.3.6.1.4.1.52642.2.1.45.1.2 | NodeportMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.2.1 | TableportTable | not-accessible | current | Table of descriptive and status information describing the configuration of each switch port. This table also contains information about each trunk. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1 | RowportEntry | not-accessible | current | An entry in the table, describing the configuration of one switch port or trunk. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.1 | ColumnportIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.2 | ColumnportName | read-write | current | The name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later). |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.3 | ColumnportType | read-only | current | Indicates the port type of the configuration of the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.4 | ColumnportSpeedDpxCfg | read-write | current | Configures the speed and duplex mode for a port or trunk, according to: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex … |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.5 | ColumnportFlowCtrlCfg | read-write | current | (1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDu… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.6 | ColumnportCapabilities | read-write | current | Port or trunk capabilities. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.7 | ColumnportAutonegotiation | read-write | current | Whether auto-negotiation is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.8 | ColumnportSpeedDpxStatus | read-only | current | The operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the memb… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.9 | ColumnportFlowCtrlStatus | read-only | current | (2) BackPressure flow control mechanism is used. (3) IEEE 802.3 flow control mechanism is used. (4) Flow control mechanism is disabled. If the entry represents… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.10 | ColumnportTrunkIndex | read-only | current | The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.12 | ColumnportComboForcedMode | read-write | current | This determines the running mode of a combo port. For a non-combo port, this variable has a value of none(1), and setting this variable to none(1) has no effec… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.16 | ColumnportMtu | read-write | current | Maximum frame size of port. If the size of the incoming packet is larger than this value, the packet will be discarded. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.17 | ColumnportMacAddrLearningStatus | read-write | current | Set this variable to enabled(1) to start to learn MAC addresses. Set this variable to disabled(2) to stop to learn MAC addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.18 | ColumnportMacAddrLearningCount | read-only | current | The current number of learned MAC addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.19 | ColumnportUpTime | read-only | current | The port up time (in hundredths of a second). |
| 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.20 | ColumnportShutdownReason | read-only | current | The reason of port shutdown. The value is 0 if no shutdown action is applied to this port. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3 | NodecableDiagMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.1 | ScalarcableDiagCtlAction | read-write | current | To execute cable diagnostics on a port, assign cableDiagCtlAction to the value of ifIndex defined by the ifIndex in the IF-MIB. When read, this object always r… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.2 | TablecableDiagResultTable | not-accessible | current | Table for cable diagnostics result. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.2.1 | RowcableDiagResultEntry | not-accessible | current | Entry for cable diagnostics result. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.2.1.1 | ColumncableDiagResultIfIndex | not-accessible | current | This is defined as the ifIndex. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.2.1.2 | ColumncableDiagResultStatusPairA | read-only | current | The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) mea… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.2.1.3 | ColumncableDiagResultStatusPairB | read-only | current | The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) mea… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.2.1.4 | ColumncableDiagResultStatusPairC | read-only | current | The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) mea… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.2.1.5 | ColumncableDiagResultStatusPairD | read-only | current | The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) mea… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.2.1.6 | ColumncableDiagResultDistancePairA | read-only | current | Displays the fault distance of pair A of the cable in meters. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.2.1.7 | ColumncableDiagResultDistancePairB | read-only | current | Displays the fault distance of pair B of the cable in meters. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.2.1.8 | ColumncableDiagResultDistancePairC | read-only | current | Displays the fault distance of pair C of the cable in meters. If the port is 10/100 type, value of the node is zero. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.2.1.9 | ColumncableDiagResultDistancePairD | read-only | current | Displays the fault distance of pair D of the cable in meters. If the port is 10/100 type, value of the node is zero. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.2.1.10 | ColumncableDiagResultDistanceAccuracy | read-only | current | Displays the accuracy in meters of the cable testing. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.3.2.1.11 | ColumncableDiagResultTime | read-only | current | Displays the last time of cable diagnostics. For example, 'Jan 1 02:03:04 2002'. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.4 | NodeloopbackTestMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.2.4.1 | ScalarloopInternalCtlAction | read-write | current | To execute internal loopback test on a port, assign loopInternalCtlAction to the value of ifIndex defined by the ifIndex in the IF-MIB. When read, this object … |
| 1.3.6.1.4.1.52642.2.1.45.1.2.4.2 | TableloopInternalResultTable | not-accessible | current | Table for internal loopback test result. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.4.2.1 | RowloopInternalResultEntry | not-accessible | current | Entry for internal loopback test result. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.4.2.1.1 | ColumnloopInternalResultIfIndex | not-accessible | current | This is defined as the ifIndex. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.4.2.1.2 | ColumnloopInternalResultStatus | read-only | current | The result of internal loopback. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.4.2.1.3 | ColumnloopInternalResultTime | read-only | current | Displays the last time of internal loopback. For example, 'Jan 1 02:03:04 2002'. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.6 | TableportUtilTable | not-accessible | current | Dispalys port utilization during recent 300 seconds. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.6.1 | RowportUtilEntry | not-accessible | current | Dispalys port utilization during recent 300 seconds. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.6.1.1 | ColumnportUtilIfIndex | not-accessible | current | The port and trunk interface of the portUtilTable. The interface identified by a particular value of this index is the same interface identified by the same va… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.6.1.2 | ColumnportInOctetRate | read-only | current | The input octet rate (kbits/sec) of the port. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.6.1.3 | ColumnportInPacketRate | read-only | current | The input packet rate (pkts/sec) of the port. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.6.1.4 | ColumnportInUtil | read-only | current | The input utilization of the port, in one per hundred. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.6.1.5 | ColumnportOutOctetRate | read-only | current | The output octet rate (kbits/sec) of the port. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.6.1.6 | ColumnportOutPacketRate | read-only | current | The output packet rate (pkts/sec) of the port. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.6.1.7 | ColumnportOutUtil | read-only | current | The output utilization of the port, in one per hundred. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.7 | TableportVlanTrunkingTable | not-accessible | current | Configures vlan trunking feature. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.7.1 | RowportVlanTrunkingEntry | not-accessible | current | Configures vlan trunking feature. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.7.1.1 | ColumnportVlanTrunkingIfIndex | not-accessible | current | The port and trunk interface of the portVlanTrunkingTable. The interface identified by a particular value of this index is the same interface identified by the… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.7.1.2 | ColumnportVlanTrunkingStatus | read-write | current | Whether vlan trunking is enabled(1) or disabled(2). |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8 | NodeportHist | |||
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.1 | TableportHistControlTable | not-accessible | current | A list of history control entries. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.1.1 | RowportHistControlEntry | not-accessible | current | A list of parameters that set up a periodic sampling of statistics. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.1.1.1 | ColumnportHistControlIndex | read-only | current | An index that uniquely identifies an entry in the portHistControl table. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.1.1.2 | ColumnportHistControlName | read-create | current | A textual name of the entity. It is mandatory that this only contain printable ASCII characters. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.1.1.3 | ColumnportHistControlDataSource | read-create | current | This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this portHistControlEnt… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.1.1.4 | ColumnportHistControlInterval | read-create | current | The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this portHistControlEntry. This … |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.1.1.5 | ColumnportHistControlBucketsRequested | read-create | current | The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this portHistControlEntr… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.1.1.6 | ColumnportHistControlBucketsGranted | read-only | current | The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this portHistControlEntry. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.1.1.7 | ColumnportHistControlStatus | read-create | current | The status of this portHistControl entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2 | TableportHistCurrentTable | not-accessible | current | A list of Ethernet history entries. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1 | RowportHistCurrentEntry | not-accessible | current | An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the portHistControlEntry which set up the parame… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.1 | ColumnportHistCurrentIndex | read-only | current | The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of po… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.2 | ColumnportHistCurrentSampleIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same portHistControlEntry. This index start… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.3 | ColumnportHistCurrentIntervalStart | read-only | current | The value of sysUpTime at the start of the interval over which this sample was measured. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.4 | ColumnportHistCurrentInOctets | read-only | current | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.5 | ColumnportHistCurrentInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.6 | ColumnportHistCurrentInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.7 | ColumnportHistCurrentInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.8 | ColumnportHistCurrentInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.9 | ColumnportHistCurrentInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.10 | ColumnportHistCurrentInUnknownProtos | read-only | current | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For charac… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.11 | ColumnportHistCurrentOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.12 | ColumnportHistCurrentOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.13 | ColumnportHistCurrentOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.14 | ColumnportHistCurrentOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.15 | ColumnportHistCurrentOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.16 | ColumnportHistCurrentOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.17 | ColumnportHistCurrentInUtilization | read-only | current | The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.2.1.18 | ColumnportHistCurrentOutUtilization | read-only | current | The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3 | TableportHistPreviousTable | not-accessible | current | A list of Ethernet history entries. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1 | RowportHistPreviousEntry | not-accessible | current | An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the portHistControlEntry which set up the parame… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.1 | ColumnportHistPreviousIndex | read-only | current | The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of po… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.2 | ColumnportHistPreviousSampleIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same portHistControlEntry. This index start… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.3 | ColumnportHistPreviousIntervalStart | read-only | current | The value of sysUpTime at the start of the interval over which this sample was measured. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.4 | ColumnportHistPreviousInOctets | read-only | current | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.5 | ColumnportHistPreviousInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.6 | ColumnportHistPreviousInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.7 | ColumnportHistPreviousInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.8 | ColumnportHistPreviousInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.9 | ColumnportHistPreviousInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.10 | ColumnportHistPreviousInUnknownProtos | read-only | current | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For charac… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.11 | ColumnportHistPreviousOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.12 | ColumnportHistPreviousOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.13 | ColumnportHistPreviousOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.14 | ColumnportHistPreviousOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.15 | ColumnportHistPreviousOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.16 | ColumnportHistPreviousOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.17 | ColumnportHistPreviousInUtilization | read-only | current | The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.8.3.1.18 | ColumnportHistPreviousOutUtilization | read-only | current | The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.10 | TableportMediaInfoTable | not-accessible | current | This table lists the information of the media device (SFP/XFP/Copper) installed in the physical port. Only the ifIndices of Ethernet ports those are associated… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.10.1 | RowportMediaInfoEntry | not-accessible | current | An entry in the Interface Media Information table. The ifIndices of ethernet interfaces will be used to index this table. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.10.1.1 | ColumnportMediaInfoIfIndex | not-accessible | current | ifindex. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.10.1.2 | ColumnportMediaInfoConnectorType | read-only | current | The connector type. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.10.1.3 | ColumnportMediaInfoFiberType | read-only | current | The fiber type. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.10.1.4 | ColumnportMediaInfoEthComplianceCodes | read-only | current | The ethernet compliance codes. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.10.1.5 | ColumnportMediaInfoBaudRate | read-only | current | The baud rate. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.10.1.6 | ColumnportMediaInfoVendorOUI | read-only | current | The OUI of the vendor. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.10.1.7 | ColumnportMediaInfoVendorName | read-only | current | The media vendor name, full name of the corporation. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.10.1.8 | ColumnportMediaInfoPartNumber | read-only | current | The media vendor part number. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.10.1.9 | ColumnportMediaInfoRevision | read-only | current | The media vendor product version number. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.10.1.10 | ColumnportMediaInfoSerialNumber | read-only | current | The vendor serial number of the media device. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.10.1.11 | ColumnportMediaInfoDateCode | read-only | current | The date code of the media device. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.11 | TableportOpticalMonitoringInfoTable | not-accessible | current | This table lists the instrumented parameters of all optical interfaces. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.11.1 | RowportOpticalMonitoringInfoEntry | not-accessible | current | Only the ifIndices of optical interfaces whose parameters need to be monitored will be used to index this table. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.11.1.1 | ColumnportOpticalMonitoringInfoIfIndex | not-accessible | current | ifindex. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.11.1.2 | ColumnportOpticalMonitoringInfoTemperature | read-only | current | This object holds the value of the transmitter laser diode temperature for the interface. This object indicates the health of the transmitter. The format is xx… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.11.1.3 | ColumnportOpticalMonitoringInfoVcc | read-only | current | This object holds the value of the Vcc. It is measured in V. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, … |
| 1.3.6.1.4.1.52642.2.1.45.1.2.11.1.4 | ColumnportOpticalMonitoringInfoTxBiasCurrent | read-only | current | Tx Bias Current. It is measured in mA. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or high… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.11.1.5 | ColumnportOpticalMonitoringInfoTxPower | read-only | current | This object holds the value of the transmitter optical signal power for the interface, measured in dBm. If the device supports ALARM WARNING TRAP, then followe… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.11.1.6 | ColumnportOpticalMonitoringInfoRxPower | read-only | current | This object holds the value of the receiver optical signal power for the interface, measured in dBm. If the device support ALARM WARNING TRAP, then followed by… |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12 | TableportTransceiverThresholdInfoTable | not-accessible | current | This table lists the threshold of transceivers. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1 | RowportTransceiverThresholdInfoEntry | not-accessible | current | Identify the index of the transceiver |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.1 | ColumnportTransceiverThresholdInfoIfIndex | not-accessible | current | ifindex. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.2 | ColumnportTransceiverThresholdInfoTemperatureLowAlarm | read-write | current | This object holds the low alarm threshold of the transmitter laser diode temperature for the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.3 | ColumnportTransceiverThresholdInfoTemperatureLowWarn | read-write | current | This object holds the low warning threshold of the transmitter laser diode temperature for the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.4 | ColumnportTransceiverThresholdInfoTemperatureHighWarn | read-write | current | This object holds the high warning threshold of the transmitter laser diode temperature for the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.5 | ColumnportTransceiverThresholdInfoTemperatureHighAlarm | read-write | current | This object holds the high alarm threshold of the transmitter laser diode temperature for the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.6 | ColumnportTransceiverThresholdInfoVccLowAlarm | read-write | current | This object holds the low alarm threshold of the Vcc. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.7 | ColumnportTransceiverThresholdInfoVccLowWarn | read-write | current | This object holds the low warning threshold of the Vcc. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.8 | ColumnportTransceiverThresholdInfoVccHighWarn | read-write | current | This object holds the high warning threshold of the Vcc. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.9 | ColumnportTransceiverThresholdInfoVccHighAlarm | read-write | current | This object holds the high alarm threshold of the Vcc. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.10 | ColumnportTransceiverThresholdInfoTxBiasCurrentLowAlarm | read-write | current | low alarm threshold of Tx Bias Current. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.11 | ColumnportTransceiverThresholdInfoTxBiasCurrentLowWarn | read-write | current | low warning threshold of Tx Bias Current. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.12 | ColumnportTransceiverThresholdInfoTxBiasCurrentHighWarn | read-write | current | high warning threshold of Tx Bias Current. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.13 | ColumnportTransceiverThresholdInfoTxBiasCurrentHighAlarm | read-write | current | high alarm threshold of Tx Bias Current. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.14 | ColumnportTransceiverThresholdInfoTxPowerLowAlarm | read-write | current | This object holds the low alarm threshold of the transmitter optical signal power for theinterface. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.15 | ColumnportTransceiverThresholdInfoTxPowerLowWarn | read-write | current | This object holds the low warning threshold of the transmitter optical signal power for the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.16 | ColumnportTransceiverThresholdInfoTxPowerHighWarn | read-write | current | This object holds the high warning threshold of the transmitter optical signal power for the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.17 | ColumnportTransceiverThresholdInfoTxPowerHighAlarm | read-write | current | This object holds the high alarm threshold of the transmitter optical signal power for the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.18 | ColumnportTransceiverThresholdInfoRxPowerLowAlarm | read-write | current | This object holds the low alarm threshold of the receiver optical signal power for the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.19 | ColumnportTransceiverThresholdInfoRxPowerLowWarn | read-write | current | This object holds the low warning threshold of the receiver optical signal power for the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.20 | ColumnportTransceiverThresholdInfoRxPowerHighWarn | read-write | current | This object holds the high warning threshold of the receiver optical signal power for the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.21 | ColumnportTransceiverThresholdInfoRxPowerHighAlarm | read-write | current | This object holds the high alarm threshold of the receiver optical signal power for the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.2.12.1.22 | ColumnportTransceiverThresholdAutoMode | read-write | current | Indicate the transceiver threshold is retrieved from EEPROM or configured by user. |
| 1.3.6.1.4.1.52642.2.1.45.1.3 | NodetrunkMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.3.1 | ScalartrunkMaxId | read-only | current | The maximum number for a trunk identifier. |
| 1.3.6.1.4.1.52642.2.1.45.1.3.2 | ScalartrunkValidNumber | read-only | current | The number of valid trunks. |
| 1.3.6.1.4.1.52642.2.1.45.1.3.3 | TabletrunkTable | not-accessible | current | Table describing the configuration and status of each trunk. |
| 1.3.6.1.4.1.52642.2.1.45.1.3.3.1 | RowtrunkEntry | not-accessible | current | An entry describing the configuration and status of a particular trunk. |
| 1.3.6.1.4.1.52642.2.1.45.1.3.3.1.1 | ColumntrunkIndex | not-accessible | current | Identifies the trunk within the switch that is described by the table entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.3.3.1.2 | ColumntrunkPorts | read-create | current | The complete set of ports currently associated with this trunk. |
| 1.3.6.1.4.1.52642.2.1.45.1.3.3.1.3 | ColumntrunkCreation | read-only | current | A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk. |
| 1.3.6.1.4.1.52642.2.1.45.1.3.3.1.4 | ColumntrunkStatus | read-create | current | Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. A trunk created by LACP cannot be manually destroyed or (re)configured. |
| 1.3.6.1.4.1.52642.2.1.45.1.3.4 | ScalartrunkBalanceMode | read-write | current | This defines the load balancing mode of trunks in the system. It may be based on source and/or destination MAC address or IP address. macSrc(1) means source MA… |
| 1.3.6.1.4.1.52642.2.1.45.1.4 | NodelacpMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.4.1 | TablelacpPortTable | not-accessible | current | Table for LACP port configuration. |
| 1.3.6.1.4.1.52642.2.1.45.1.4.1.1 | RowlacpPortEntry | not-accessible | current | Entry for LACP port configuration. While an entry may exist for a particular port, the port may not support LACP and an attempt to enable LACP may result in fa… |
| 1.3.6.1.4.1.52642.2.1.45.1.4.1.1.1 | ColumnlacpPortIndex | not-accessible | current | The port interface of the lacpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of … |
| 1.3.6.1.4.1.52642.2.1.45.1.4.1.1.2 | ColumnlacpPortStatus | read-write | current | Whether 802.3ad LACP is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.5 | NodestaMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.5.1 | ScalarstaSystemStatus | read-write | current | Global spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2 | TablestaPortTable | not-accessible | current | The table manages port settings for Spanning Tree Protocol 802.1d, 802.1w or 802.1s depending on the value specified by staProtocolType. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1 | RowstaPortEntry | not-accessible | current | The conceptual entry of staPortTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.3 | ColumnstaPortProtocolMigration | read-write | current | When operating in RSTP (version 2) mode, writing true(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effe… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.5 | ColumnstaPortOperEdgePort | read-only | current | The operational value of the edge port parameter. The object is initialized to the value of staPortAdminEdgePort and is set false when a BPDU is received. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.6 | ColumnstaPortAdminPointToPoint | read-write | current | The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.7 | ColumnstaPortOperPointToPoint | read-only | current | The operational point-to-point status of the LAN segment attached to this port. This indicates whether a port is considered to have a point-to-point connection… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.9 | ColumnstaPortSystemStatus | read-write | current | Per-port spanning tree status. (1) Spanning tree protocol is enabled. (2) Spanning tree protocol is disabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.10 | ColumnstaPortLongAdminPathCost | read-write | current | The admin value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.11 | ColumnstaPortLongOperPathCost | read-only | current | The oper value of the RSTP path cost or MST external pathcost. The contribution of this port to the path cost (in 32 bits value) of paths towards the spanning … |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.12 | ColumnstaPortBpduFlooding | read-write | current | This parameter is used to configure the capability of BPDUs flooding. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.15 | ColumnstaPortBpduGuard | read-write | current | A value of enabled(1) indicates that BPDU port guard feature is enabled for each port. A value of disabled(2) indicates that the feature is disabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.16 | ColumnstaPortAdminEdgePortWithAuto | read-write | current | The administrative value of the edge port parameter. A value of enable(1) indicates that this port should be assumed as an edge-port, a value of disable(2) ind… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.17 | ColumnstaPortBpduFilter | read-write | current | The administrative value of the BPDU filter parameter. A value of enabled(1) indicates that this port will avoid transmitting BPDUs on edge-port and the value … |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.18 | ColumnstaPortRootGuardStatus | read-write | current | Specifies the desired status of the root guard. This variable configures the root guard feature to enforce the root bridge placement in the network. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.19 | ColumnstaPortBpduGuardAutoRecovery | read-write | current | A value of enabled(1) indicates that BPDU port guard auto recovery mechanism is enabled for this port. A value of disabled(2) indicates that the mechanism is d… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.20 | ColumnstaPortBpduGuardAutoRecoveryInterval | read-write | current | The interval in seconds used by BPDU guard auto recovery mechanism. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.2.1.21 | ColumnstaPortTcPropStop | read-write | current | Stop topology change progate on this ifindex. Don't enable on potentially ring port. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.3 | ScalarstaProtocolType | read-write | current | The version of Spanning Tree Protocol the bridge is currently running. The value 'stp(1)' indicates the Spanning Tree Protocol is as specified in IEEE 802.1D,'… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.4 | ScalarstaTxHoldCount | read-write | current | The value used by the Port Transmit state machine to limit the maximum transmission rate. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.5 | ScalarstaPathCostMethod | read-write | current | Indicates the type of spanning tree path cost mode configured on the switch. This mode applies to all instances of the spanning tree protocol running on the sw… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6 | NodexstMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.1 | ScalarmstName | read-write | current | The name of the Multiple Spanning Tree region. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.2 | ScalarmstRevision | read-write | current | The Revision number of the Multiple Spanning Tree region. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.3 | ScalarmstMaxHops | read-write | current | The max hop number counts of the Multiple Spanning Tree region. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4 | TablexstInstanceCfgTable | not-accessible | current | This table is used to configure the property of a specific instance in Multiple Spanning Tree or Rapid Spanning Tree. If Rapid Spanning Tree protocol is in use… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1 | RowxstInstanceCfgEntry | not-accessible | current | A conceptual row containing the property of the RST or MST instance. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.1 | ColumnxstInstanceCfgIndex | not-accessible | current | An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.2 | ColumnxstInstanceCfgPriority | read-write | current | The priority of a specific spanning tree instance. The value assigned should be in the range 0-61440 in steps of 4096. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.3 | ColumnxstInstanceCfgTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the last topology change detected by the bridge entity in RST or MST. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.4 | ColumnxstInstanceCfgTopChanges | read-only | current | The total number of topology changes detected by this bridge in RST or MST since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.5 | ColumnxstInstanceCfgDesignatedRoot | read-only | current | The bridge identifier of the root of the spanning tree as determined by the Multiple Spanning Tree Protocol. (802.1s) or Rapid Spanning Tree Protocol (802.1w) … |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.6 | ColumnxstInstanceCfgRootCost | read-only | current | The cost of the path to the root as seen from this bridge of the RST or MST. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.7 | ColumnxstInstanceCfgRootPort | read-only | current | The number of the port which offers the lowest cost path from this bridge to the root bridge of the RST or MST. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.8 | ColumnxstInstanceCfgMaxAge | read-only | current | The maximum age of Multiple Spanning Tree Protocol (802.1s) or Rapid Spanning Tree Protocol (802.1w) information learned from the network on any port before it… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.9 | ColumnxstInstanceCfgHelloTime | read-only | current | The amount of time between the transmission of configuration bridge PDUs by this node on any port when it is the root of the specific spanning tree or trying t… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.10 | ColumnxstInstanceCfgHoldTime | read-only | current | This time value determines the interval length during which no more than two configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.11 | ColumnxstInstanceCfgForwardDelay | read-only | current | For RST or MST protocol, this time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards … |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.12 | ColumnxstInstanceCfgBridgeMaxAge | read-only | current | For RST or MST protocol, the time (in hundredths of second) that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 speci… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.13 | ColumnxstInstanceCfgBridgeHelloTime | read-only | current | For RST or MST protocol,the time (in hundredths of a second) that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.14 | ColumnxstInstanceCfgBridgeForwardDelay | read-only | current | For RST or MST protocol, the time (in hundredths of a second) that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-19… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.15 | ColumnxstInstanceCfgTxHoldCount | read-only | current | For RST or MST protocol, the value used by the port transmit state machine to limit the maximum transmission rate. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.4.1.16 | ColumnxstInstanceCfgPathCostMethod | read-only | current | For RST or MST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree pro… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.5 | TablexstInstancePortTable | not-accessible | current | The extension table for dot1dStpPortEntry to provide additional Spanning Tree information and configuration. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.5.1 | RowxstInstancePortEntry | not-accessible | current | The conceptual row for xstInstancePortTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.5.1.3 | ColumnxstInstancePortPriority | read-write | current | Defines the priority used for this port in the Spanning Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest prior… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.5.1.4 | ColumnxstInstancePortState | read-only | current | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame: discard… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.5.1.5 | ColumnxstInstancePortEnable | read-only | current | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.5.1.7 | ColumnxstInstancePortDesignatedRoot | read-only | current | The unique bridge identifier of the bridge recorded as the root in the configuration BPDUs transmitted by the designated bridge for the segment to which the po… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.5.1.8 | ColumnxstInstancePortDesignatedCost | read-only | current | The path cost of the designated port of the segment connected to this port. This value is compared to the root path cost field in received bridge PDUs. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.5.1.9 | ColumnxstInstancePortDesignatedBridge | read-only | current | The bridge identifier of the bridge which this port considers to be the designated bridge for this port's segment. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.5.1.10 | ColumnxstInstancePortDesignatedPort | read-only | current | The port identifier of the port on the designated bridge for this port's segment. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.5.1.11 | ColumnxstInstancePortForwardTransitions | read-only | current | The number of times this port has transitioned from the learning state to the forwarding state. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.5.1.12 | ColumnxstInstancePortPortRole | read-only | current | The role of the port in the RST or MST protocol: (1) The port has no role within the spanning tree (2) The port is part of the active topology connecting the b… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.5.1.13 | ColumnxstInstancePortAdminPathCost | read-write | current | The admin value of the MST internal path cost, in the range of 1 to 200000000. 0 indicate the pathcost is dynamically determined by attribute of the port. This… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.5.1.14 | ColumnxstInstancePortOperPathCost | read-only | current | The oper value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices.… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.6 | TablemstInstanceEditTable | not-accessible | current | The instance table for the Multiple Spanning Tree region |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.6.1 | RowmstInstanceEditEntry | not-accessible | current | A conceptual row containing the status of the MSTP instance. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.6.1.1 | ColumnmstInstanceEditIndex | not-accessible | current | An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.6.1.2 | ColumnmstInstanceEditVlansMap | read-create | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through … |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.6.1.3 | ColumnmstInstanceEditVlansMap2k | read-create | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.6.1.4 | ColumnmstInstanceEditVlansMap3k | read-create | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.6.1.5 | ColumnmstInstanceEditVlansMap4k | read-create | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.6.1.6 | ColumnmstInstanceEditRemainingHops | read-only | current | The remaining hop count for this MST instance. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.7 | TablemstInstanceOperTable | not-accessible | current | The Multiple Spanning Tree region instance vlan mapped table. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.7.1 | RowmstInstanceOperEntry | not-accessible | current | A conceptual row containing the status of the MSTP instance. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.7.1.1 | ColumnmstInstanceOperIndex | not-accessible | current | An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.7.1.2 | ColumnmstInstanceOperVlansMap | read-only | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through … |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.7.1.3 | ColumnmstInstanceOperVlansMap2k | read-only | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.7.1.4 | ColumnmstInstanceOperVlansMap3k | read-only | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.6.7.1.5 | ColumnmstInstanceOperVlansMap4k | read-only | current | A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.8 | TablestaLoopbackDetectionPortTable | not-accessible | current | A table provides the mechanism to configure the spanning tree loopback detection of each port or trunk |
| 1.3.6.1.4.1.52642.2.1.45.1.5.8.1 | RowstaLoopbackDetectionPortEntry | not-accessible | current | A conceptual row of staLoopbackDetectionPortTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.8.1.1 | ColumnstaLoopbackDetectionPortIfIndex | accessible-for-notify | current | The port and the trunk interfaces of the portTable. The interface identified by a particular value of this index is the same interface as identified by the sam… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.8.1.2 | ColumnstaLoopbackDetectionPortStatus | read-write | current | Status of the port on whether spanning tree loopback detection is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.8.1.3 | ColumnstaLoopbackDetectionPortTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the loopback BPDUs have been detected. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.8.1.4 | ColumnstaLoopbackDetectionPortReleaseMode | read-write | current | Setting it to auto(1) indicates that this port can be released from discarding state automatically after loopback has occurred. Setting it to manual(2) indicat… |
| 1.3.6.1.4.1.52642.2.1.45.1.5.8.1.5 | ColumnstaLoopbackDetectionPortRelease | read-write | current | Set this to release(2) to release the port from discarding state. noRelease(1) will always be obtained when reading this variable. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.8.1.7 | ColumnstaLoopbackDetectionPortShutdownInterval | read-write | current | Set the interval used when loopback detection action is shutdown. |
| 1.3.6.1.4.1.52642.2.1.45.1.5.9 | ScalarstaSystemBPDUFlooding | read-write | current | Global BPDU flooding behavior configuration. When BPDU is received on spanning tree disabled port. (1) BPDU is flooded to all other spanning tree disabled port… |
| 1.3.6.1.4.1.52642.2.1.45.1.7 | NoderestartMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.7.1 | ScalarrestartOpCodeFile | read-write | current | Name of op-code file for start-up. |
| 1.3.6.1.4.1.52642.2.1.45.1.7.2 | ScalarrestartConfigFile | read-write | current | Name of configuration file for start-up. |
| 1.3.6.1.4.1.52642.2.1.45.1.7.3 | ScalarrestartControl | read-write | current | Setting this object to warmBoot(2) causes the device to reinitialize itself such that neither the agent configuration nor the protocol entity implementation is… |
| 1.3.6.1.4.1.52642.2.1.45.1.8 | NodemirrorMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.8.1 | TablemirrorTable | not-accessible | current | Table for port mirroring, enabling a port to be mirrored to/from another port. Not all ports can be mirrored and limitations may apply as to which ports can be… |
| 1.3.6.1.4.1.52642.2.1.45.1.8.1.1 | RowmirrorEntry | not-accessible | current | The conceptual row of mirrorTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.8.1.1.1 | ColumnmirrorDestinationPort | not-accessible | current | The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the sa… |
| 1.3.6.1.4.1.52642.2.1.45.1.8.1.1.2 | ColumnmirrorSourcePort | not-accessible | current | The source port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same va… |
| 1.3.6.1.4.1.52642.2.1.45.1.8.1.1.3 | ColumnmirrorType | read-create | current | If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and… |
| 1.3.6.1.4.1.52642.2.1.45.1.8.1.1.4 | ColumnmirrorStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.8.3 | TablerspanTable | not-accessible | current | A table that contains the settings of RSPAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.8.3.1 | RowrspanEntry | not-accessible | current | The conceptual row of rspanTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.8.3.1.1 | ColumnrspanSessionId | not-accessible | current | The session ID that may specify an entry in the table which contains destination port(s) information. |
| 1.3.6.1.4.1.52642.2.1.45.1.8.3.1.2 | ColumnrspanSrcTxPorts | read-create | current | Specifies the source port list in tx mode. |
| 1.3.6.1.4.1.52642.2.1.45.1.8.3.1.3 | ColumnrspanSrcRxPorts | read-create | current | Specifies the source port list in rx mode. |
| 1.3.6.1.4.1.52642.2.1.45.1.8.3.1.4 | ColumnrspanDstPort | read-create | current | The port number of a destination port. The interface identified by a particular value of this index is the same interface as identified by the same value of if… |
| 1.3.6.1.4.1.52642.2.1.45.1.8.3.1.5 | ColumnrspanDstPortTag | read-create | current | Specifies the traffic which is sent out from source port with RSPAN VLAN ID or not. |
| 1.3.6.1.4.1.52642.2.1.45.1.8.3.1.6 | ColumnrspanSwitchRole | read-create | current | Specifies the role of current switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.8.3.1.7 | ColumnrspanRemotePorts | read-create | current | Specifies the uplink port list. |
| 1.3.6.1.4.1.52642.2.1.45.1.8.3.1.8 | ColumnrspanRemoteVlanId | read-create | current | Specifies the ID of a RSPAN VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.8.3.1.9 | ColumnrspanOperStatus | read-only | current | The operational status of the entry. A status of up(1) means the setting of a session is complete and it has started performing its function. A status of down(… |
| 1.3.6.1.4.1.52642.2.1.45.1.8.3.1.10 | ColumnrspanStatus | read-create | current | Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.9 | NodeigmpSnoopMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.9.1 | ScalarigmpSnoopStatus | read-write | current | Parameter to enable or disable IGMP snooping on the device. When enabled, the device will examine IGMP packets and set up filters for IGMP ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.2 | ScalarigmpSnoopQuerier | read-write | current | Enables (disables) whether the switch acts as an IGMP querier. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.6 | ScalarigmpSnoopRouterPortExpireTime | read-write | current | Sets the time (in seconds) the switch waits after the previous querier has stopped querying before the router port (which received query packets from previous … |
| 1.3.6.1.4.1.52642.2.1.45.1.9.7 | ScalarigmpSnoopVersion | read-write | current | IGMP version snooped |
| 1.3.6.1.4.1.52642.2.1.45.1.9.8 | TableigmpSnoopRouterCurrentTable | not-accessible | current | Table for current router ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.8.1 | RowigmpSnoopRouterCurrentEntry | not-accessible | current | Entry for current router ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.8.1.1 | ColumnigmpSnoopRouterCurrentVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.52642.2.1.45.1.9.8.1.2 | ColumnigmpSnoopRouterCurrentPorts | read-only | current | The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.8.1.3 | ColumnigmpSnoopRouterCurrentStatus | read-only | current | The set of ports which are static multicast router ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.9 | TableigmpSnoopRouterStaticTable | not-accessible | current | Table for static router ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.9.1 | RowigmpSnoopRouterStaticEntry | not-accessible | current | Entry for static router ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.9.1.1 | ColumnigmpSnoopRouterStaticVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.52642.2.1.45.1.9.9.1.2 | ColumnigmpSnoopRouterStaticPorts | read-create | current | The set of ports which are static router ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.9.1.3 | ColumnigmpSnoopRouterStaticStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.11 | TableigmpSnoopMulticastStaticTable | not-accessible | current | Table for static multicast addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.11.1 | RowigmpSnoopMulticastStaticEntry | not-accessible | current | Entry for static multicast addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.11.1.1 | ColumnigmpSnoopMulticastStaticVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.52642.2.1.45.1.9.11.1.2 | ColumnigmpSnoopMulticastStaticIpAddress | not-accessible | current | IP address of multicast group. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.11.1.3 | ColumnigmpSnoopMulticastStaticPorts | read-create | current | The set of ports which are members. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.11.1.4 | ColumnigmpSnoopMulticastStaticStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14 | TableigmpSnoopCurrentVlanTable | not-accessible | current | Table for enabling or disabling IGMP snooping per VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1 | RowigmpSnoopCurrentVlanEntry | not-accessible | current | Entry for enabling or disabling IGMP snooping. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1.1 | ColumnigmpSnoopCurrentVlanIndex | not-accessible | current | Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1.2 | ColumnigmpSnoopCurrentVlanStatus | read-write | current | The parameter to enable or disable the Snooping Status on this VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1.3 | ColumnigmpSnoopCurrentVlanImmediateLeave | read-write | current | The parameter to enable or disable the Immediate-Leave feature on this VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1.4 | ColumnigmpSnoopCurrentVlanGeneralQuerySuppression | read-write | current | The parameter to enable or disable the general query suppresion on this VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1.5 | ColumnigmpSnoopCurrentVlanLastMemQueryCount | read-write | current | Represents the number of queries sent by the switch before it assumes there are no local members. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1.6 | ColumnigmpSnoopCurrentVlanLastMemQueryIntvl | read-write | current | The last member query interval is the max response time inserted into group-specific queries sent in response to leave group messages,and is also the the max r… |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1.7 | ColumnigmpSnoopCurrentVlanProxyAddress | read-write | current | Represents the address of queries sent by the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1.8 | ColumnigmpSnoopCurrentVlanQueryIntvl | read-write | current | Represents the query interval of queries sent by the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1.9 | ColumnigmpSnoopCurrentVlanQueryRespIntvl | read-write | current | Represents the query response interval of queries sent by the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1.10 | ColumnigmpSnoopCurrentVlanProxyReporting | read-write | current | Set this variable to enabled(1) to enable the feature. Set this variable to disabled(2) to disable the feature. Set this variable to default(3), the status of … |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1.11 | ColumnigmpSnoopCurrentVlanVersion | read-write | current | the version of igmp packets is supported by this vlan. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1.12 | ColumnigmpSnoopCurrentVlanVersionExclusive | read-write | current | Enable/disable control of the IGMP Snooping exclusive supported version. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.14.1.13 | ColumnigmpSnoopCurrentVlanReportSupression | read-write | current | Set this variable to enabled(1) to enable the feature. Set this variable to disabled(2) to disable the feature. Set this variable to default(0), the status of … |
| 1.3.6.1.4.1.52642.2.1.45.1.9.15 | TableigmpSnoopMulticastGroupTable | not-accessible | current | Table for current multicast addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.15.1 | RowigmpSnoopMulticastGroupEntry | not-accessible | current | Entry for Group multicast addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.15.1.1 | ColumnigmpSnoopMulticastGroupVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.52642.2.1.45.1.9.15.1.2 | ColumnigmpSnoopMulticastGroupIpAddress | not-accessible | current | IP address of multicast group. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.15.1.3 | ColumnigmpSnoopMulticastGroupSourceIPAddress | not-accessible | current | Source IP address of source. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.15.1.4 | ColumnigmpSnoopMulticastGroupPorts | read-only | current | The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.15.1.5 | ColumnigmpSnoopMulticastGroupStatus | read-only | current | The set of ports which are static IGMP member ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.17 | ScalarigmpSnoopFilterStatus | read-write | current | Parameter to enable or disable IGMP filtering on the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.18 | TableigmpSnoopProfileTable | not-accessible | current | The table for configuring the IGMP snooping profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.18.1 | RowigmpSnoopProfileEntry | not-accessible | current | The entry for configuring the IGMP snooping profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.18.1.1 | ColumnigmpSnoopProfileId | not-accessible | current | The ID of the IGMP snooping profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.18.1.2 | ColumnigmpSnoopProfileAction | read-write | current | The access mode of the IGMP snooping profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.18.1.3 | ColumnigmpSnoopProfileStatus | read-write | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.19 | NodeigmpSnoopProfileCtl | |||
| 1.3.6.1.4.1.52642.2.1.45.1.9.19.1 | ScalarigmpSnoopProfileCtlId | read-write | current | The ID of the IGMP snooping profile. The default value is zero, meaning that no ID is specified. In order to create a profile, a non-zero value must be specifi… |
| 1.3.6.1.4.1.52642.2.1.45.1.9.19.2 | ScalarigmpSnoopProfileCtlInetAddressType | read-write | current | The address type is associated with this agent. Only ipv4(1) type is supported. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.19.3 | ScalarigmpSnoopProfileCtlStartInetAddress | read-write | current | The specified addresses in the start of the controlled IP multicast addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.19.4 | ScalarigmpSnoopProfileCtlEndInetAddress | read-write | current | The specified addresses in the end of the controlled IP multicast addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.19.5 | ScalarigmpSnoopProfileCtlAction | read-write | current | Setting it to create(2) creates the range of the controlled IP multicast addresses. Setting it to destroy(3) destroys the range of the controlled IP multicast … |
| 1.3.6.1.4.1.52642.2.1.45.1.9.20 | TableigmpSnoopProfileRangeTable | not-accessible | current | The table for configuring the range of the IGMP snooping profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.20.1 | RowigmpSnoopProfileRangeEntry | not-accessible | current | The entry for configuring the range of the IGMP snooping profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.20.1.1 | ColumnigmpSnoopProfileRangeProfileId | not-accessible | current | This is defined as igmpSnoopProfileId. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.20.1.2 | ColumnigmpSnoopProfileRangeInetAddressType | not-accessible | current | The address type is associated with this agent. Only ipv4(1) type is supported. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.20.1.3 | ColumnigmpSnoopProfileRangeStartInetAddress | not-accessible | current | The specified addresses in the start of the controlled IP multicast addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.20.1.4 | ColumnigmpSnoopProfileRangeEndInetAddress | read-only | current | The specified addresses in the end of the controlled IP multicast addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.20.1.5 | ColumnigmpSnoopProfileRangeAction | read-only | current | The access mode of the IGMP snooping profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.21 | TableigmpSnoopFilterPortTable | not-accessible | current | Table for port configuration in IGMP filtering. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.21.1 | RowigmpSnoopFilterPortEntry | not-accessible | current | Entry for port configuration in IGMP filtering. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.21.1.1 | ColumnigmpSnoopFilterPortIndex | not-accessible | current | The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface ide… |
| 1.3.6.1.4.1.52642.2.1.45.1.9.21.1.2 | ColumnigmpSnoopFilterPortProfileId | read-write | current | The igmpSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the igmpSnoopProfileId object. I… |
| 1.3.6.1.4.1.52642.2.1.45.1.9.22 | TableigmpSnoopThrottlePortTable | not-accessible | current | Table for port configuration in IGMP throttling. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.22.1 | RowigmpSnoopThrottlePortEntry | not-accessible | current | Entry for port configuration in IGMP throttling. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.22.1.1 | ColumnigmpSnoopThrottlePortIndex | not-accessible | current | The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface ide… |
| 1.3.6.1.4.1.52642.2.1.45.1.9.22.1.2 | ColumnigmpSnoopThrottlePortRunningStatus | read-only | current | Describes the running status of the IGMP throttling to the switch. A value of true(1) indicates the IGMP throttling mechanism is active. A value of false(2) in… |
| 1.3.6.1.4.1.52642.2.1.45.1.9.22.1.3 | ColumnigmpSnoopThrottlePortAction | read-write | current | The action mode of the IGMP throttling. A value of replace(1) means to replace a joined multicast group randomly when an interface receives an IGMP report and … |
| 1.3.6.1.4.1.52642.2.1.45.1.9.22.1.4 | ColumnigmpSnoopThrottlePortMaxGroups | read-write | current | The maximum number of IGMP groups that the interface can join. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.22.1.5 | ColumnigmpSnoopThrottlePortCurrentGroups | read-only | current | The current number of IGMP groups that the interface has joined. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27 | TableigmpSnoopPortTable | not-accessible | current | Table of IGMP Snooping service per port. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1 | RowigmpSnoopPortEntry | not-accessible | current | Entry of IGMP Snooping service per port. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.1 | ColumnigmpSnoopPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same … |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.3 | ColumnigmpSnoopQueryDrop | read-write | current | Parameter to enable or disable dropping IGMP Query packet. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.4 | ColumnigmpSnoopMulticastDataDrop | read-write | current | Parameter to enable or disable dropping IP multicast data |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.5 | ColumnigmpSnoopPortNumGroups | read-only | current | Current learned groups |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.6 | ColumnigmpSnoopPortNumJoinSend | read-only | current | Number of join send |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.7 | ColumnigmpSnoopPortNumJoins | read-only | current | Number of join recieved |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.8 | ColumnigmpSnoopPortNumJoinSuccess | read-only | current | Number of join group success |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.9 | ColumnigmpSnoopPortNumLeavesSend | read-only | current | Number of leave send |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.10 | ColumnigmpSnoopPortNumLeaves | read-only | current | Number of leave received |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.11 | ColumnigmpSnoopPortNumGeneralQuerySend | read-only | current | Number of general query send. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.12 | ColumnigmpSnoopPortNumGeneralQueryRecevied | read-only | current | Number of general query received. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.13 | ColumnigmpSnoopPortNumSepcificQuerySend | read-only | current | Number of specific query send. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.14 | ColumnigmpSnoopPortNumSpecificQueryReceived | read-only | current | Number of specific query received. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.15 | ColumnigmpSnoopPortNumInvalidReport | read-only | current | Number of invalid report received. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.16 | ColumnigmpSnoopPortClearStatistics | read-write | current | Clear this VLAN all statistics |
| 1.3.6.1.4.1.52642.2.1.45.1.9.27.1.17 | ColumnigmpSnoopAuthentication | read-write | current | Parameter to enable or disable IGMP Authentication |
| 1.3.6.1.4.1.52642.2.1.45.1.9.28 | NodeigmpSnoopGlobalMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.9.28.1 | ScalarigmpSnoopProxyReporting | read-write | current | Parameter to enable or disable IGMP snooping proxy reporting on the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.28.2 | ScalarigmpSnoopRouterAlertOptionCheck | read-write | current | Parameter to enable or disable IGMP snooping router alert option check on the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.28.3 | ScalarigmpSnoopTcnFlood | read-write | current | Parameter to enable or disable IGMP snooping tcn flood on the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.28.4 | ScalarigmpSnoopTcnQuerySolicit | read-write | current | Parameter to enable or disable IGMP snooping tcn query solicit on the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.28.5 | ScalarigmpSnoopUnregisteredDataFlood | read-write | current | Parameter to enable or disable IGMP snooping Unregistered data flood solicit on the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.28.6 | ScalarigmpSnoopUnsolicitedReportInterval | read-write | current | Setting this value to specify how long (in seconds) the uplink ports should transmit unsolicited reports. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.28.7 | ScalarigmpSnoopVersionExclusive | read-write | current | Parameter to enable or disable IGMP snooping version exclusive on the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.28.8 | ScalarigmpSnoopMrouterForwardMode | read-write | current | Paremete to set IGMP snooping Mrouter port forward mode. When set dynamic, IGMP snooping Mrouter port won't forward multicast streams received from other mrout… |
| 1.3.6.1.4.1.52642.2.1.45.1.9.29 | ScalarigmpSnoopForwardingPriority | read-write | current | Configure IGMP snooping multicast stream forwarding priority. If value is 65535, it means the priority is disabled |
| 1.3.6.1.4.1.52642.2.1.45.1.9.30 | TableigmpSnoopQueryDropTable | not-accessible | current | Table of IGMP Snooping query drop per vlan and per vlan configuration. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.30.1 | RowigmpSnoopQueryDropEntry | not-accessible | current | Entry of IGMP Snooping service per port and per VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.30.1.1 | ColumnigmpSnoopQueryDropPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same … |
| 1.3.6.1.4.1.52642.2.1.45.1.9.30.1.2 | ColumnigmpSnoopQueryDropVlanBitmap | read-write | current | The VLAN bitmap which query drop applied on this port. If all zero, it means disable, For all VLAN, please use igmpSnoopPortTable to configure. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.32 | ScalarigmpSnoopClearDynamicGroups | read-write | current | The current number of IGMP groups that the interface has joined. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33 | TableigmpSnoopVlanTable | not-accessible | current | Table of IGMP Snooping service per port. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1 | RowigmpSnoopVlanEntry | not-accessible | current | Entry of IGMP Snooping service per VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1.1 | ColumnigmpSnoopVlanIndex | not-accessible | current | VLAN ID |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1.2 | ColumnigmpSnoopVlanNumGroups | read-only | current | Current learned groups |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1.3 | ColumnigmpSnoopVlanNumJoinSend | read-only | current | Number of join send. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1.4 | ColumnigmpSnoopVlanNumJoins | read-only | current | Number of join received |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1.5 | ColumnigmpSnoopVlanNumJoinSuccess | read-only | current | Number of jion success |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1.6 | ColumnigmpSnoopVlanNumLeavesSend | read-only | current | Number of leave send. |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1.7 | ColumnigmpSnoopVlanNumLeaves | read-only | current | Number of leave received |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1.8 | ColumnigmpSnoopVlanNumGeneralQuerySend | read-only | current | Number of general query send |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1.9 | ColumnigmpSnoopVlanNumGeneralQueryRecevied | read-only | current | Number of general query received |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1.10 | ColumnigmpSnoopVlanNumSepcificQuerySend | read-only | current | Number of specific query send |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1.11 | ColumnigmpSnoopVlanNumSpecificQueryReceived | read-only | current | Number of sepcific query received |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1.12 | ColumnigmpSnoopVlanNumInvalidReport | read-only | current | Number of invalid report received |
| 1.3.6.1.4.1.52642.2.1.45.1.9.33.1.13 | ColumnigmpSnoopVlanClearStatistics | read-write | current | Clear this VLAN statistics |
| 1.3.6.1.4.1.52642.2.1.45.1.10 | NodeipMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.10.2 | ScalarnetDefaultGateway | read-write | current | The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.3 | ScalaripHttpState | read-write | current | Whether HTTP is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.4 | ScalaripHttpPort | read-write | current | The port number for HTTP. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.5 | ScalaripDhcpRestart | read-write | current | When set to restart(1) the DHCP server will restart. When read, this value always returns noRestart(2). |
| 1.3.6.1.4.1.52642.2.1.45.1.10.6 | ScalaripHttpsState | read-write | current | Whether HTTPS is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.7 | ScalaripHttpsPort | read-write | current | The port number for HTTPS. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.11 | NodedhcpMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.10.11.1 | NodedhcpClient | |||
| 1.3.6.1.4.1.52642.2.1.45.1.10.11.1.1 | NodedhcpcOptions | |||
| 1.3.6.1.4.1.52642.2.1.45.1.10.11.1.1.1 | TabledhcpcInterfaceTable | not-accessible | current | Table for DHCP client information listed by interface. Depending on the nature of the product, this table may have only one entry(e.g. for the management VLAN)… |
| 1.3.6.1.4.1.52642.2.1.45.1.10.11.1.1.1.1 | RowdhcpcInterfaceEntry | not-accessible | current | Entry for DHCP client information listed by interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.11.1.1.1.1.1 | ColumndhcpcIfIndex | not-accessible | current | This is defined by ifIndex in the IF-MIB.(static vlan if index) |
| 1.3.6.1.4.1.52642.2.1.45.1.10.11.1.1.1.1.4 | ColumndhcpcIfVendorClassIdMode | read-write | current | Whether the vendor class ID is in text mode or in Hex mode. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.11.1.1.1.1.5 | ColumndhcpcIfVendorClassId | read-write | current | The value that the DHCP client sets in the vendor class_id option of DHCPDISCOVER and DHCPREQUEST messages. This value may be used by DHCP servers to identify … |
| 1.3.6.1.4.1.52642.2.1.45.1.10.11.6 | ScalardhcpDynamicProvisionStatus | read-write | current | A per-system enable/disable configuration to decide whether to use the specified configuration file in DHCP packet. It shall use the specified configuration fi… |
| 1.3.6.1.4.1.52642.2.1.45.1.10.15 | NodepingMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.10.15.1 | ScalarpingIpAddress | read-write | current | Specifies the IP address of the device that is planned to ping. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.15.2 | ScalarpingPacketSize | read-write | current | Specifies the size of each data potion of ping packets in bytes. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.15.4 | ScalarpingCompleted | read-only | current | A value of true(1) will be read when this ping operation has been either responded to or changed to the time-out status. A value of false(2) will be read when … |
| 1.3.6.1.4.1.52642.2.1.45.1.10.15.5 | ScalarpingAction | read-write | current | The action of the pingMgt operation. Sets these objects to pingStart(2) to begin the ping operation. Once the action is set to pingStart(2), the associated pin… |
| 1.3.6.1.4.1.52642.2.1.45.1.10.15.6 | ScalarpingProbeCount | read-write | current | Specifies the number of times to perform a ping operation at a remote host. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.15.7 | ScalarpingSentPackets | read-only | current | The value of this object reflects the number of probes sent. The value of this object must be reported as 0 when no probes have been sent. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.15.8 | ScalarpingReceivedPackets | read-only | current | Number of responses received. The value of this object must be reported as 0 when no probe responses have been received. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.15.9 | ScalarpingPacketLossRate | read-only | current | Packet loss rate of this ping operation. This variable is calculated by pingReceivedPackets and pingSentPackets. The rate is expressed as a percentage. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.15.10 | TablepingHistoryTable | not-accessible | current | Contains the executive result information for the ping operation. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.15.10.1 | RowpingHistoryEntry | not-accessible | current | A conceptual row in the pingHistory table. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.15.10.1.1 | ColumnpingHistoryIndex | not-accessible | current | A new entry in this table is created when the result of a ping probe is determined. The old entries will be cleared when a new ping action is started. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.15.10.1.2 | ColumnpingHistoryResponse | read-only | current | This variable represents the round trip time and is measured in milliseconds. The variable is the difference between received time and sent time for a ping pro… |
| 1.3.6.1.4.1.52642.2.1.45.1.10.16 | TableiPAddrTable | not-accessible | current | A table of iPAddrEntry. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.16.1 | RowiPAddrEntry | not-accessible | current | A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is … |
| 1.3.6.1.4.1.52642.2.1.45.1.10.16.1.1 | ColumniPAddrIfIndex | not-accessible | current | The VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.16.1.2 | ColumniPAddrIPAddress | not-accessible | current | The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask is 0.0.0.0, then when the… |
| 1.3.6.1.4.1.52642.2.1.45.1.10.16.1.3 | ColumniPAddrSubnetMask | not-accessible | current | The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask are 0.0.0.0, then when t… |
| 1.3.6.1.4.1.52642.2.1.45.1.10.16.1.4 | ColumniPAddrPrimaryInterface | read-create | current | Whether this is a primary interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.16.1.5 | ColumniPAddrUnnumbered | read-only | current | Whether this is an unnumbered interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.10.16.1.6 | ColumniPAddrStatus | read-create | current | The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.52642.2.1.45.1.12 | NodevlanMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.12.1 | TablevlanTable | not-accessible | current | Table for VLAN configuration. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.1.1 | RowvlanEntry | not-accessible | current | Entry for VLAN configuration. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.1.1.1 | ColumnvlanIndex | not-accessible | current | Based on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.1.1.2 | ColumnvlanAddressMethod | read-write | current | Method to get the IP address. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.2 | TablevlanPortTable | not-accessible | current | Table for port configuration in VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.2.1 | RowvlanPortEntry | not-accessible | current | Entry for port configuration in VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.2.1.1 | ColumnvlanPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.52642.2.1.45.1.12.2.1.2 | ColumnvlanPortMode | read-write | current | This variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to access(3) set… |
| 1.3.6.1.4.1.52642.2.1.45.1.12.2.1.3 | ColumnvlanPortPrivateVlanType | read-write | current | The port type defined for private VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6 | NodevoiceVlanMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.1 | TablevoiceVlanOuiTable | not-accessible | current | A table containing the mac address which can be identified by Voice VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.1.1 | RowvoiceVlanOuiEntry | not-accessible | current | A table containing the mac address which can be identified by Voice VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.1.1.1 | ColumnvoiceVlanOuiAddress | read-only | current | MAC address can be identified by voice vlan. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.1.1.2 | ColumnvoiceVlanOuiMask | read-write | current | The mask of MAC address. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.1.1.3 | ColumnvoiceVlanOuiDescription | read-write | current | The description of OUI. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.1.1.4 | ColumnvoiceVlanOuiStatus | read-create | current | Current operation status of the row. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.2 | ScalarvoiceVlanEnabledId | read-write | current | Voice VLAN enabled status and VLAN ID: enabled (1..4093), disabled (-1). |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.3 | ScalarvoiceVlanAgingTime | read-write | current | Voice VLAN aging time, the unit of which is minute. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.7 | TablevoiceVlanPortTable | not-accessible | current | A list of voice VLAN port entries. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.7.1 | RowvoiceVlanPortEntry | not-accessible | current | An entry containing Voice VLAN port information, which is applicable to a Voice VLAN enabled interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.7.1.1 | ColumnvoiceVlanPortIfIndex | not-accessible | current | The index of interface on which Voice VLAN function is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.7.1.2 | ColumnvoiceVlanPortMode | read-write | current | Voice VLAN configuration mode status. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.7.1.3 | ColumnvoiceVlanPortSecurity | read-write | current | If the security is enabled, the port only allows voice traffic for the Voice VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.7.1.4 | ColumnvoiceVlanPortPriority | read-write | current | The priority of the voice vlan traffic in the port. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.7.1.5 | ColumnvoiceVlanPortRuleOui | read-write | current | The address of voice device is learned from OUI table. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.7.1.6 | ColumnvoiceVlanPortRuleLldp | read-write | current | The address of voice device is learned from LLDP discovery. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.6.7.1.7 | ColumnvoiceVlanPortRemainAge | read-only | current | Remaining aging time, the unit of which is minute. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.8 | NodevlanDot1qTunnelGlobalConfig | |||
| 1.3.6.1.4.1.52642.2.1.45.1.12.8.1 | ScalarvlanDot1qTunnelStatus | read-write | current | This parameter is used to globally enable/disable 802.1Q Tunneling on the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.9 | TablevlanDot1qTunnelPortTable | not-accessible | current | Table for port configuration in 802.1Q Tunneling. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.9.1 | RowvlanDot1qTunnelPortEntry | not-accessible | current | Entry for port configuration in 802.1Q Tunneling. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.9.1.1 | ColumnvlanDot1qTunnelPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.52642.2.1.45.1.12.9.1.2 | ColumnvlanDot1qTunnelPortMode | read-write | current | This variable sets the 802.1Q Tunneling mode. Setting it to none(1) indicates no mode in this port. Setting it to access(2) sets as dot1q-tunnel mode port whic… |
| 1.3.6.1.4.1.52642.2.1.45.1.12.9.1.3 | ColumnvlanDot1qTunnelPortEtherType | read-write | current | TPID for 802.1Q encapsulation. It's used to select a nonstandard (nondefault) 2-byte ethertype to identify 802.1Q tagged frames. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.9.1.4 | ColumnvlanDot1qTunnelPortPriorityMapStatus | read-write | current | Status of priority mapping. Set to enabled(1) to use 802.1p priority of inner tag as packet's priority instead of using outer tag. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.11 | TablemacVlanTable | not-accessible | current | A table that contains the settings for MAC-based VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.11.1 | RowmacVlanEntry | not-accessible | current | A conceptual row in the macVlanTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.11.1.1 | ColumnmacVlanMacAddress | not-accessible | current | The MAC address that may specify an entry in the table which contains MAC-based VLAN information. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.11.1.2 | ColumnmacVlanId | read-create | current | Specifies the VLAN ID which the MAC address associates with. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.11.1.3 | ColumnmacVlanPriority | read-create | current | Specifies the priority whcich the MAC address associates with. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.11.1.4 | ColumnmacVlanStatus | read-create | current | Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.12 | ScalarmacVlanClearAction | read-write | current | Action for clearing macVlanTable. When this object is set to clear(2), all entries in macVlanTable will be cleared. When this object is read, the value of this… |
| 1.3.6.1.4.1.52642.2.1.45.1.12.13 | TablesubnetVlanTable | not-accessible | current | A table that contains the settings for IP subnet-based VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.13.1 | RowsubnetVlanEntry | not-accessible | current | A conceptual row in the subnetVlanTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.13.1.1 | ColumnsubnetVlanIpAddress | not-accessible | current | The IPv4 address of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of … |
| 1.3.6.1.4.1.52642.2.1.45.1.12.13.1.2 | ColumnsubnetVlanMask | not-accessible | current | The netmask of a subnet. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x wit… |
| 1.3.6.1.4.1.52642.2.1.45.1.12.13.1.3 | ColumnsubnetVlanId | read-create | current | Specifies the VLAN ID which the subnet associates with. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.13.1.4 | ColumnsubnetVlanPriority | read-create | current | Specifies the priority whcich the subnet associates with. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.13.1.5 | ColumnsubnetVlanStatus | read-create | current | Set this to valid(1) to create an entry. Set this to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.14 | ScalarsubnetVlanClearAction | read-write | current | Action for clearing subnetVlanTable. When this object is set to clear(2), all entries in subnetVlanTable will be cleared. When this object is read, the value o… |
| 1.3.6.1.4.1.52642.2.1.45.1.12.15 | TablevlanStaticExtTable | not-accessible | current | The extension table of dot1qVlanStaticTable. This table enhances the original table with extra vlanStaticExtRspanStatus to create and destroy RSPAN VLAN(s). |
| 1.3.6.1.4.1.52642.2.1.45.1.12.15.1 | RowvlanStaticExtEntry | not-accessible | current | A conceptual row in the vlanStaticExtTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.15.1.1 | ColumnvlanStaticExtRspanStatus | read-create | current | Displays type of a VLAN is vlan(2) or rspanVlan(3). Set this to destroy(1) to destroy a RSPAN VLAN. Set this to rspanVlan(3) to create a RSPAN VLAN. Setting th… |
| 1.3.6.1.4.1.52642.2.1.45.1.12.17 | TablevlanStaticTable | not-accessible | current | Table for static VLAN configuration including VLAN aggregation support. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.17.1 | RowvlanStaticEntry | not-accessible | current | Static information for a VLAN configured on the device by (local or network) management. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.17.1.1 | ColumnvlanStaticIndex | not-accessible | current | The VLAN ID of the VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.17.1.2 | ColumnvlanStaticInterfaceType | read-create | current | The interface type of the VLAN (there is a subtype of IANAifType). l2vlan(135) refers to L2 interface and can't accept any L3 related configuration. l3ipvlan(1… |
| 1.3.6.1.4.1.52642.2.1.45.1.12.18 | TablevlanDot1qTunnelSrvCvidPortTable | not-accessible | current | Table for port configuration to specify how to insert outer tag by matching customer VLAN ID. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.18.1 | RowvlanDot1qTunnelSrvCvidPortEntry | not-accessible | current | Entry for port configuration to specify how to insert outer tag by matching customer VLAN ID. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.18.1.1 | ColumnvlanDot1qTunnelSrvCvidPortIndex | not-accessible | current | The port interface of the vlanDot1qTunnelSrvCvidPortTable. The interface identified by a particular value of this index is the same interface as identified by … |
| 1.3.6.1.4.1.52642.2.1.45.1.12.18.1.2 | ColumnvlanDot1qTunnelSrvCvidPortCvid | not-accessible | current | Specifies customer VLAN ID. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.18.1.3 | ColumnvlanDot1qTunnelSrvCvidPortSvid | read-create | current | Specifies service VLAN ID. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.18.1.5 | ColumnvlanDot1qTunnelSrvCvidPortStatus | read-create | current | Set to valid(1) to create an entry. Set to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.18.1.6 | ColumnvlanDot1qTunnelSrvCvidPortAction | read-create | current | Sets action of this entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.22 | TablevlanDot1qTunnelSrvDfltPortTable | not-accessible | current | Table for port configuration to specify the behavior of default service. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.22.1 | RowvlanDot1qTunnelSrvDfltPortEntry | not-accessible | current | Entry for port configuration to specify the behavior of default service. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.22.1.1 | ColumnvlanDot1qTunnelSrvDfltPortIndex | not-accessible | current | The port interface of the vlanDot1qTunnelSrvDfltPortTable. The interface identified by a particular value of this index is the same interface as identified by … |
| 1.3.6.1.4.1.52642.2.1.45.1.12.22.1.2 | ColumnvlanDot1qTunnelSrvDfltPortStatus | read-create | current | Set to valid(1) to create an entry. Set to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.12.22.1.3 | ColumnvlanDot1qTunnelSrvDfltPortAction | read-create | current | Sets action of this entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.13 | NodepriorityMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.13.12 | TableprioWrrPortTable | not-accessible | current | Table for per port weighted round robin (WRR). |
| 1.3.6.1.4.1.52642.2.1.45.1.13.12.1 | RowprioWrrPortEntry | not-accessible | current | Entry for per port weighted round robin (WRR). |
| 1.3.6.1.4.1.52642.2.1.45.1.13.12.1.1 | ColumnprioWrrPortIfIndex | not-accessible | current | The port interface of the prioWrrPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value … |
| 1.3.6.1.4.1.52642.2.1.45.1.13.12.1.2 | ColumnprioWrrPortTrafficClass | not-accessible | current | Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTraf… |
| 1.3.6.1.4.1.52642.2.1.45.1.13.12.1.3 | ColumnprioWrrPortWeight | read-write | current | Weight for this entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.13.15 | TableprioSchedModePortTable | not-accessible | current | Table for per port scheduling mode. |
| 1.3.6.1.4.1.52642.2.1.45.1.13.15.1 | RowprioSchedModePortEntry | not-accessible | current | Entry for per port scheduling mode. |
| 1.3.6.1.4.1.52642.2.1.45.1.13.15.1.1 | ColumnprioSchedModePortIndex | not-accessible | current | The port interface of the prioSchedModePortEntry. |
| 1.3.6.1.4.1.52642.2.1.45.1.13.15.1.2 | ColumnprioSchedModePort | read-write | current | The scheduling mode status of ethernet port. wrr(1), strict(2), strict-wrr(4) |
| 1.3.6.1.4.1.52642.2.1.45.1.14 | NodetrapDestMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.14.2 | NodetrapVar | |||
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.6 | ScalartrapIpFilterRejectMode | accessible-for-notify | current | This variable is for trap var binding, indicated the ipfilter reject mode. web(1), snmp(2), telnet(3). |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.7 | ScalartrapIpFilterRejectIp | accessible-for-notify | current | This variable is for trap var binding, indicating the IP address that rejected by the ipfilter. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.10 | ScalartrapVarMacAddr | accessible-for-notify | current | The MAC address. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.11 | ScalartrapVarLoginUserName | accessible-for-notify | current | The name of the user who logs into the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.12 | ScalartrapVarSessionType | accessible-for-notify | current | The method by which the user logs in to control the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.15 | ScalartrapVarLoginInetAddressType | accessible-for-notify | current | The address type of the address associated with this agent. Only IPv4 and IPv6 types are supported. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.16 | ScalartrapVarLoginInetAddress | accessible-for-notify | current | The IP address from which the user logs into the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.17 | ScalartrapIpFilterRejectInetAddressType | accessible-for-notify | current | This variable is for trap var binding, indicating the IP address that was rejected by the IP filter. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.18 | ScalartrapIpFilterRejectInetAddress | accessible-for-notify | current | This variable is for trap var binding, indicating the IP address that was rejected by the IP filter. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.29 | ScalartrapPortSecurityIntrusionMac | accessible-for-notify | current | This variable indicates the intrusion MAC address. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.62 | ScalartrapDhcpClientPortIfIndex | accessible-for-notify | current | ifIndex for the port connected to DHCP rogue server. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.63 | ScalartrapDhcpServerIpAddress | accessible-for-notify | current | The IP address of the rogue server. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.64 | ScalartrapSfpThresholdAlarmWarnIfIndex | accessible-for-notify | current | ifIndex for the port issued alarm/warning trap. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.65 | ScalartrapSfpThresholdAlarmWarnType | accessible-for-notify | current | SFP's alarm/warning type . |
| 1.3.6.1.4.1.52642.2.1.45.1.14.2.66 | ScalartrapUdldPortShutdownReason | accessible-for-notify | current | This variable is for trap var binding, indicated the reason for the UDLD port shutdown. unidirectionalLink(1): unidirectional link detected, mismatchWithNeighb… |
| 1.3.6.1.4.1.52642.2.1.45.1.14.5 | NodealarmMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.14.5.1 | ScalaralarmMajorType | accessible-for-notify | current | The parameter indicates which event triggers the trap. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.5.2 | ScalaralarmMajorStatus | read-only | current | The parameter indicates which event triggers the trap. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.5.3 | ScalaralarmMinorType | accessible-for-notify | current | The parameter indicates which event triggers the trap. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.5.4 | ScalaralarmMinorStatus | read-only | current | The parameter indicates which event triggers the trap. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.5.5 | ScalaralarmMajorRecoveryType | accessible-for-notify | current | The parameter indicates which event triggers the trap. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.5.6 | ScalaralarmMajorRecoveryStatus | read-only | current | The parameter indicates which event triggers the trap. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.5.7 | ScalaralarmInputType | accessible-for-notify | current | The parameter indicates which alarm input event triggers the trap. |
| 1.3.6.1.4.1.52642.2.1.45.1.14.5.8 | ScalaralarmInputStatus | read-only | current | The parameter indicates which event triggers the trap. |
| 1.3.6.1.4.1.52642.2.1.45.1.16 | NodeqosMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.16.1 | NoderateLimitMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.16.1.2 | TablerateLimitPortTable | not-accessible | current | Table for rate limit of each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.1.2.1 | RowrateLimitPortEntry | not-accessible | current | Entry for rate limit of each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.1.2.1.1 | ColumnrlPortIndex | not-accessible | current | The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface … |
| 1.3.6.1.4.1.52642.2.1.45.1.16.1.2.1.6 | ColumnrlPortInputStatus | read-write | current | Whether input rate limit is enabled for this port. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.1.2.1.7 | ColumnrlPortOutputStatus | read-write | current | Whether output rate limit is enabled for this port. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.1.2.1.10 | ColumnrlPortInputLimitInKilo | read-write | current | Value of the input rate limit. Its unit is kilobits per second. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.1.2.1.11 | ColumnrlPortOutputLimitInKilo | read-write | current | Value of the output rate limit. Its unit is kilobits per second. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3 | NodecosMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.2 | TableprioIfClassificationModeTable | not-accessible | current | Table for setting the interface Qos mapping classification mode. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.2.1 | RowprioIfClassificationModeEntry | not-accessible | current | Entry for setting the interface Qos mapping classification mode. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.2.1.1 | ColumnprioIfClassificationModeIf | not-accessible | current | The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value o… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.2.1.2 | ColumnprioIfClassificationModeStatus | read-write | current | The Qos mapping classification mode of the interface. cos mode means that the internal priority is mapped from priority field of packet's VLAN tag if a VLAN ta… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.3 | TableprioCosToDscpTable | not-accessible | current | Table for CoS/CFI to internal QoS label mapping. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.3.1 | RowprioCosToDscpEntry | not-accessible | current | Entry for CoS/CFI to internal QoS label mapping. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.3.1.1 | ColumnprioCosToDscpIfValue | not-accessible | current | The port or the trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same val… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.3.1.2 | ColumnprioCosToDscpCosValue | not-accessible | current | The CoS value (0~7) mapped to an internal QoS label value which is composed of PHB(3 bits) and drop precedence(2 bits). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.3.1.3 | ColumnprioCosToDscpCFIValue | not-accessible | current | The CFI value (0 or 1) mapped to an internal QoS label value which is composed of PHB(3 bits) and drop precedence(2 bits). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.3.1.5 | ColumnprioCosToDscpPhbValue | read-write | current | The PHB value of internal QoS label. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.3.1.6 | ColumnprioCosToDscpColorValue | read-write | current | The drop precedence value of internal QoS label. Green(0), Yellow(3), Red(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.4 | TableprioPrecToDscpTable | not-accessible | current | Table for IP precedence to internal QoS label mapping. This table setting will take effect only when the interface QoS mapping classification mode is set to IP… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.4.1 | RowprioPrecToDscpEntry | not-accessible | current | Entry for IP precedence to internal QoS label mapping. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.4.1.1 | ColumnprioPrecToDscpIfValue | not-accessible | current | The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value o… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.4.1.2 | ColumnprioPrecToDscpPrecValue | not-accessible | current | The IP precedence value mapped to internal QoS label value which is composed of PHB (3 bits) and drop precedence (2 bits). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.4.1.4 | ColumnprioPrecToDscpPhbValue | read-write | current | The PHB value of internal QoS label. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.4.1.5 | ColumnprioPrecToDscpColorValue | read-write | current | The drop precedence value of internal QoS label. Green(0), Yellow(3), Red(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.5 | TableprioDscpToDscpTable | not-accessible | current | Table for DSCP to internal QoS label mapping. This table setting will take effect only when the interface Qos mapping classification mode is set to DSCP mode. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.5.1 | RowprioDscpToDscpEntry | not-accessible | current | Entry for ingress DSCP to internal QoS label mapping. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.5.1.1 | ColumnprioDscpToDscpIfValue | not-accessible | current | The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value o… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.5.1.2 | ColumnprioDscpToDscpIngressDscpValue | not-accessible | current | The ingress DSCP value which will be mapped to internal QoS label value. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.5.1.4 | ColumnprioDscpToDscpPhbValue | read-write | current | The PHB value of internal QoS label. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.5.1.5 | ColumnprioDscpToDscpColorValue | read-write | current | The drop precedence value of internal QoS label. Green(0), Yellow(3), Red(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.6 | TableprioDstPortToDscpTable | not-accessible | current | Table for TCP/UDP destination port number to internal Qos label mapping. This table setting will always take effect for TCP/UDP packets no matter of what inter… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.6.1 | RowprioDstPortToDscpEntry | not-accessible | current | Entry for TCP/UDP destination port to internal QoS label mapping. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.6.1.1 | ColumnprioDstPortToDscpIfValue | not-accessible | current | The port or the trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same val… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.6.1.2 | ColumnprioDstPortToDscpProtocolValue | not-accessible | current | The protocol value (TCP:6, UDP:17) which will be mapped to internal QoS label value. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.6.1.3 | ColumnprioDstPortToDscpDstPortValue | not-accessible | current | The destination port number value which will be mapped to internal QoS label value. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.6.1.5 | ColumnprioDstPortToDscpPhbValue | read-write | current | The PHB value of internal QoS label. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.6.1.6 | ColumnprioDstPortToDscpColorValue | read-write | current | The drop precedence value of internal QoS label. Green(0), Yellow(3), Red(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.7 | TableprioDscpToCosTable | not-accessible | current | Table for internal QoS label to CoS and CFI mapping. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.7.1 | RowprioDscpToCosEntry | not-accessible | current | Entry for internal QoS label to CoS and CFI mapping. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.7.1.1 | ColumnprioDscpToCosIfValue | not-accessible | current | The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value o… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.7.1.2 | ColumnprioDscpToCosPHBValue | not-accessible | current | The PHB value of internal QoS label. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.7.1.3 | ColumnprioDscpToCosDropPrecedenceValue | not-accessible | current | The drop precedence value of internal QoS label. Green(0), Yellow(3), Red(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.7.1.4 | ColumnprioDscpToCosCFICosValue | read-write | current | The remarked CFI and CoS value mapped from the internal Qos label value when the packet leaves the device. The egress remarked CFI value equals to (prioDscpToC… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.8 | TableprioPrioToDropPrecTable | not-accessible | current | Table for packet priority to drop precedence mapping. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.8.1 | RowprioPrioToDropPrecEntry | not-accessible | current | Entry for packet priority to drop precedence mapping. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.8.1.1 | ColumnprioPrioToDropPrecIfValue | not-accessible | current | The port or the trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same val… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.8.1.2 | ColumnprioPrioToDropPrecPriorityValue | not-accessible | current | The value of packet default priority. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.8.1.3 | ColumnprioPrioToDropPrecPrecValue | read-write | current | The drop precedence value of internal QoS label. Green(0),Yellow(3), Red(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.9 | TableprioDscpToQueueTable | not-accessible | current | Table for PHB to queue mapping. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.9.1 | RowprioDscpToQueueEntry | not-accessible | current | Entry for PHB to queue mapping. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.9.1.1 | ColumnprioDscpToQueueIfValue | not-accessible | current | The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value o… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.9.1.2 | ColumnprioDscpToQueuePHBValue | not-accessible | current | The PHB value of internal QoS label. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.3.9.1.3 | ColumnprioDscpToQueueQueueValue | read-write | current | The queue value which is mapped from the PHB value of QoS label. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4 | NodediffServMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.10 | TablediffServPolicyMapTable | not-accessible | current | Table for policy map. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.10.1 | RowdiffServPolicyMapEntry | not-accessible | current | Entry for policy map. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.10.1.1 | ColumndiffServPolicyMapIndex | not-accessible | current | An index that uniquely identifies an entry in this table. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.10.1.2 | ColumndiffServPolicyMapName | read-create | current | The name of this entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.10.1.3 | ColumndiffServPolicyMapDescription | read-create | current | The description of this entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.10.1.4 | ColumndiffServPolicyMapElementIndexList | read-only | current | The octet string containes the diffServPolicyMapElementEntry indexes. Two octets express one index and it is represented in network order. This index list indi… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.10.1.5 | ColumndiffServPolicyMapStatus | read-create | current | This object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has si… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.11 | NodediffServPolicyMapAttachCtl | |||
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.11.1 | ScalardiffServPolicyMapAttachCtlIndex | read-write | current | Index for attachment control. Specifies the policy map as the target to relate with the policy map element. The policy map identified by a particular value of … |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.11.2 | ScalardiffServPolicyMapAttachCtlElementIndex | read-write | current | Element Index for attachment control.Specifies the policy map element to relate with the policy map. The policy map element identified by a particular value of… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.11.3 | ScalardiffServPolicyMapAttachCtlAction | read-write | current | Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular policy map element is attached to a particu… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.12 | TablediffServPolicyMapElementTable | not-accessible | current | Table for policy map element. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.12.1 | RowdiffServPolicyMapElementEntry | not-accessible | current | Entry for policy map element. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.12.1.1 | ColumndiffServPolicyMapElementIndex | not-accessible | current | An index that uniquely identifies an entry in this table. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.12.1.2 | ColumndiffServPolicyMapElementClassMapIndex | read-create | current | Specifies the class map binding to this entry. The class map identified by a particular value of this index is associated with the same diffServClassMapEntry a… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.12.1.3 | ColumndiffServPolicyMapElementMeterIndex | read-create | current | Specifies the meter binding to this entry. The meter identified by a particular value of this index is associated with the same diffServMeterEntry as identifie… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.12.1.4 | ColumndiffServPolicyMapElementActionIndex | read-create | current | Specifies the action binding to this entry. The action identified by a particular value of this index is associated with the same diffServActionEntry as identi… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.12.1.5 | ColumndiffServPolicyMapElementStatus | read-create | current | This object is used to create a new row, or modify or delete an existing row, in this table. The status column has six defined values: The status column has si… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.13 | TablediffServClassMapTable | not-accessible | current | Table for class map. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.13.1 | RowdiffServClassMapEntry | not-accessible | current | Entry for class map. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.13.1.1 | ColumndiffServClassMapIndex | not-accessible | current | An index that uniquely identifies an entry in this table. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.13.1.2 | ColumndiffServClassMapName | read-create | current | The name of this entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.13.1.3 | ColumndiffServClassMapDescription | read-create | current | The description of this entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.13.1.4 | ColumndiffServClassMapMatchType | read-create | current | The map match type of this entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.13.1.5 | ColumndiffServClassMapElementIndexTypeList | read-only | current | The octet string containes the type of class map element indexes. Two octets which are represented in network order express one type of the class map element i… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.13.1.6 | ColumndiffServClassMapElementIndexList | read-only | current | The octet string containes the class map element indexes. Two octets express one index and it is represented in network order. This index list indicates the pa… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.13.1.7 | ColumndiffServClassMapStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table.The status column has six defined values: The status column has six d… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.14 | NodediffServClassMapAttachCtl | |||
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.14.1 | ScalardiffServClassMapAttachCtlIndex | read-write | current | Index for attachment control. Specifies the class map as the target to relate with class map elements. The class map identified by a particular value of this i… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.14.2 | ScalardiffServClassMapAttachCtlElementIndexType | read-write | current | Element Index for attachment control. Specifies the type of class map element to relate with the class map. When type is macAce(1), the index of diffServClassM… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.14.3 | ScalardiffServClassMapAttachCtlElementIndex | read-write | current | Element Index for attachment control. Specifies the class map element related with the class map. The class map element uses type to indicate diffServAclEntry,… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.14.4 | ScalardiffServClassMapAttachCtlAction | read-write | current | Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular class map element is attached to a particul… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.15 | TablediffServAclTable | not-accessible | current | Table for ACL. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.15.1 | RowdiffServAclEntry | not-accessible | current | Entry for ACL. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.15.1.1 | ColumndiffServAclIndex | not-accessible | current | An index that uniquely identifies an entry in the ACL table. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.15.1.2 | ColumndiffServAclName | read-create | current | The name of this entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.15.1.3 | ColumndiffServAclType | read-create | current | The type of this entry. When the value of ACL type is modified, then the ACEs in the diffServAclAceIndexList of this entry will be auto-removed, and this entry… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.15.1.4 | ColumndiffServAclAceIndexList | read-only | current | The octet string containes the ACE indexes. Two octets express one index and it is represented in network order. This index list indicates the particular ACEs … |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.15.1.5 | ColumndiffServAclStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: - 'active', which indicate… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.16 | NodediffServAclAttachCtl | |||
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.16.1 | ScalardiffServAclAttachCtlIndex | read-write | current | Index for attachment control. Specifies the ACL as the target to relate with the IP ACE, the MAC ACE or IPv6 ACE. The ACL identified by a particular value of t… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.16.2 | ScalardiffServAclAttachCtlAceType | read-write | current | Type for attachment control. Specifies the type of diffServAclAttachCtlAceIndex to relate with the diffServAclAttachCtlIndex. When the type is macAce(1), the i… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.16.3 | ScalardiffServAclAttachCtlAceIndex | read-write | current | Index for attachment control. Specifies the ACE to relate with the diffServAclAttachCtlIndex. When diffServAclAttachCtlAceType is macAce(1), the value of diffS… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.16.4 | ScalardiffServAclAttachCtlAction | read-write | current | Action for attachment control. When setting this object to attach(2) to begin the attaching operation, a particular ACE is attached to a particular ACL. When s… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17 | TablediffServIpAceTable | not-accessible | current | Table for IP ACE. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1 | RowdiffServIpAceEntry | not-accessible | current | Entry for IP ACE. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.1 | ColumndiffServIpAceIndex | not-accessible | current | An index that uniquely identifies an entry in the IP ACE table. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.2 | ColumndiffServIpAceType | read-create | current | The specified IP ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the diffServAclEntry and the not supporting field… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.3 | ColumndiffServIpAceAccess | read-create | current | Indicates the action to be taken if a packet matches this ACE. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.4 | ColumndiffServIpAceSourceIpAddr | read-create | current | The specified source IP address. The packet's source address is AND-ed with the value of IpAceSourceIpAddrBitmask and then compared against the value of this o… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.5 | ColumndiffServIpAceSourceIpAddrBitmask | read-create | current | The specified source IP address mask. The packet's source address is AND-ed with the value of IpAceSourceIpAddr and then compared against the value of this obj… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.6 | ColumndiffServIpAceDestIpAddr | read-create | current | The specified destination IP address. The packet's destination address is AND-ed with the value of diffServIpAceDestIpAddrBitmask and then compared against the… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.7 | ColumndiffServIpAceDestIpAddrBitmask | read-create | current | The specified destination IP address mask. This object may not be modified if the associated diffServIpAceType object is equal to standard(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.8 | ColumndiffServIpAceProtocol | read-create | current | The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value of 0 matches every IP packet. The objec… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.9 | ColumndiffServIpAcePrec | read-create | current | Specifies the IP precedence value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 8. This object may no… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.10 | ColumndiffServIpAceTos | read-create | current | Specifies the IP ToS facility value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 9. This object may … |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.11 | ColumndiffServIpAceDscp | read-create | current | Specifies the DSCP value to match against. The value of this object is ignored whenever the value of diffServIpAcePrec object is 64. This object may not be mod… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.12 | ColumndiffServIpAceSourcePortOp | read-create | current | Indicates how a packet's source TCP/UDP port number is to be compared. noOperator(1), which is the default value, means no comparison is to be made with the so… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.13 | ColumndiffServIpAceMinSourcePort | read-create | current | If the diffServIpAceSourcePortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the ass… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.15 | ColumndiffServIpAceSourcePortBitmask | read-create | current | If the diffServIpAceSourcePortOp is equal(2), this indicates the bitmask of the diffServIpAceMinSourcePort. This object may not be modified if the associated d… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.16 | ColumndiffServIpAceDestPortOp | read-create | current | Indicates how a packet's destination TCP/UDP port number is to be compared. noOperator(1), which is the default value, means that no comparison is to be made w… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.17 | ColumndiffServIpAceMinDestPort | read-create | current | If the diffServIpAceDestPortOp is range(3), this indicates the lower bound of the TCP/UDP port number value range. This object may not be modified if the assoc… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.19 | ColumndiffServIpAceDestPortBitmask | read-create | current | If the diffServIpAceDestPortOp is equal(2), this indicates the bitmask of the diffServIpAceMinDestPort. This object may not be modified if the associated diffS… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.20 | ColumndiffServIpAceControlCode | read-create | current | Indicates how the control flags of TCP packets are to be compared. diffServIpAceControlCode is AND-ed with diffServIpAceControlCodeBitmask. This object may not… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.21 | ColumndiffServIpAceControlCodeBitmask | read-create | current | Indicates how the control flags of TCP packets are to be compared. It can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by the sum of FIN… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.17.1.22 | ColumndiffServIpAceStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six … |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18 | TablediffServMacAceTable | not-accessible | current | Table for MAC ACE. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1 | RowdiffServMacAceEntry | not-accessible | current | Entry for MAC ACE. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.1 | ColumndiffServMacAceIndex | not-accessible | current | An index that uniquely identifies an entry in the MAC ACE table. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.2 | ColumndiffServMacAceAccess | read-create | current | Indicates the action to be taken if a packet matches this ACE. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.3 | ColumndiffServMacAcePktformat | read-create | current | Used to check the packet format of the packets. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.4 | ColumndiffServMacAceSourceMacAddr | read-create | current | Indicates the 48-bit source MAC address. The specified source MAC of the packet. The packet's source MAC address is AND-ed with the value of diffServMacAceSour… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.5 | ColumndiffServMacAceSourceMacAddrBitmask | read-create | current | The specified source MAC address mask. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.6 | ColumndiffServMacAceDestMacAddr | read-create | current | Indicates the 48-bit destination MAC address. The specified destination MAC of the packet. The packet's destination MAC address is AND-ed with the value of dif… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.7 | ColumndiffServMacAceDestMacAddrBitmask | read-create | current | The specified destination MAC address mask. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.8 | ColumndiffServMacAceVidOp | read-create | current | Indicates how a packet's VID is to be compared. This object cannot be configured when the status of the entry, diffServMacAceStatus, is active(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.9 | ColumndiffServMacAceMinVid | read-create | current | Indicates the lower bound of the VID value range if the diffServMacAceVidOp is range(3). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.10 | ColumndiffServMacAceVidBitmask | read-create | current | The bit mask of the VID. The default value is 0. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.12 | ColumndiffServMacAceEtherTypeOp | read-create | current | Indicates how a packet's ether type is to be compared. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.13 | ColumndiffServMacAceEtherTypeBitmask | read-create | current | The bit mask of Ether type. The default value is 0. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.14 | ColumndiffServMacAceMinEtherType | read-create | current | Indicates the lower bound of the ether type value range if the diffServMacAceEtherTypeOp is range(3). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.16 | ColumndiffServMacAceStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six … |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.17 | ColumndiffServMacAceCosOp | read-create | current | Indicates how a packet's CoS is compared. If the object type of diffServMacAceCosOp is equal(2), diffServMacAceMinCos indicates the CoS value for comparing, an… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.18 | ColumndiffServMacAceCosBitmask | read-create | current | Indicates the bitmask of the CoS value if the object type of diffServMacAceCosOp is equal(2). The default value is 0. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.18.1.19 | ColumndiffServMacAceMinCos | read-create | current | If the object type of diffServMacAceCosOp is equal(2), diffServMacAceMinCos indicates the CoS value for comparing. If the object type of diffServMacAceCosOp is… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.19 | TablediffServActionTable | not-accessible | current | Table for action. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.19.1 | RowdiffServActionEntry | not-accessible | current | Entry for action. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.19.1.1 | ColumndiffServActionIndex | not-accessible | current | An index that uniquely identifies an entry in the action table. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.19.1.2 | ColumndiffServActionList | read-create | current | The bitmap value used to identify which action capabilities are enabled on the entry. The actionPktNewPri and actionPktNewDscp can not be enabled at the same t… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.19.1.3 | ColumndiffServActionPktNewPri | read-create | current | Specifies the new priority value for the packet when the action is satisfied. If the actionPktNewPri bit of the diffServActionList is not enabled, this object … |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.19.1.4 | ColumndiffServActionPktPhb | read-create | current | Specifies the inner priority value for the packet when the action is satisfied. If the actionPktPhb bit of the diffServActionList is not enabled, this object c… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.19.1.5 | ColumndiffServActionGreenPktTransmit | read-create | current | The actionGreenPktTransmit bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the green marking packet will … |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.19.1.6 | ColumndiffServActionGreenPktNewDscp | read-create | current | Specifies the new DSCP value for the packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionGreenPktNewDs… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.19.1.7 | ColumndiffServActionYellowPktNewDscp | read-create | current | Specifies the new DSCP value for the packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionYellowPktNewD… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.19.1.8 | ColumndiffServActionYellowDrop | read-create | current | The actionYellowDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dropp… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.19.1.9 | ColumndiffServActionRedPktNewDscp | read-create | current | Specifies the new DSCP value for the red marking packet when the action is satisfied. The value of this object is ignored whenever the value of diffServActionR… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.19.1.10 | ColumndiffServActionRedDrop | read-create | current | The actionRedDrop bit of the diffServActionList is for configuring this object. If the value of this object is enabled, the red marking packet will be dropped. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.19.1.11 | ColumndiffServActionStatus | read-create | current | This object is used to create a new row, modify or delete an existing row in this table. The status column has six defined values: The status column has six de… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.20 | TablediffServMeterTable | not-accessible | current | Table for meter. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.20.1 | RowdiffServMeterEntry | not-accessible | current | Entry for meter. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.20.1.1 | ColumndiffServMeterIndex | not-accessible | current | An entry that describes a single set of token bucket parameters. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.20.1.2 | ColumndiffServMeterModel | read-create | current | The Metering algorithm associated with the Token Bucket parameters. The zeroDotZero indicates this is unknown. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.20.1.3 | ColumndiffServMeterRate | read-create | current | The token-bucket rate, in kilobits per second (kbps). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.20.1.4 | ColumndiffServMeterBurstSize | read-create | current | The maximum number of bytes in a single transmission burst. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.20.1.6 | ColumndiffServMeterStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six … |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.20.1.7 | ColumndiffServMeterPeakRate | read-create | current | The token-bucket rate, in kilobits per second (kbps). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.20.1.8 | ColumndiffServMeterPeakBurstSize | read-create | current | The maximum number of bytes in a double transmission burst. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.21 | TablediffServIpv6AceTable | not-accessible | current | Table for IPv6 ACE. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.21.1 | RowdiffServIpv6AceEntry | not-accessible | current | Entry fo IPv6 ACE. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.21.1.1 | ColumndiffServIpv6AceIndex | not-accessible | current | An index that uniquely identifies an entry in the IPv6 table. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.21.1.2 | ColumndiffServIpv6AceType | read-create | current | The specified IP v6 ACE type. When the type of this entry is modified, then this entry will be auto-unbound from the diffServAclEntry and the not supporting fi… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.21.1.3 | ColumndiffServIpv6AceAccess | read-create | current | Indicates the action to be taken if a packet matches this ACE. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.21.1.4 | ColumndiffServIpv6AceSourceIpAddr | read-create | current | Specifies the source IPv6 address. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.21.1.5 | ColumndiffServIpv6AceSourceIpAddrPrefixLen | read-create | current | The length (in bits) associated with the source IPv6 address prefix of this entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.21.1.6 | ColumndiffServIpv6AceDestIpAddr | read-create | current | Specifies the destination IPv6 address. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.21.1.7 | ColumndiffServIpv6AceDestIpAddrPrefixLen | read-create | current | The length (in bits) associated with the destination IPv6 address prefix of this entry. This object may not be modified if the associated diffServIpv6AceType o… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.21.1.9 | ColumndiffServIpv6AceDscp | read-create | current | Specifies the DSCP value to match against. This object may not be modified if the associated diffServIpv6AceType object is equal to standard(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.21.1.11 | ColumndiffServIpv6AceStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. The status column has six defined values: The status column has six … |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.26 | TablediffServAclHwCounterTable | not-accessible | current | Table for differentiated services hardware counter on each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.26.1 | RowdiffServAclHwCounterEntry | not-accessible | current | Entry for differentiated services hardware counter on each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.26.1.1 | ColumndiffServAclHwCounterIfIndex | read-only | current | This object is the interface index of diffServPortEntry. The interface identified by a particular value of this index is the same interface as identified by th… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.26.1.2 | ColumndiffServAclHwCounterDirection | read-only | current | Indicates a particular direction of traffic. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.26.1.3 | ColumndiffServAclHwCounterAclIndex | read-only | current | An index that uniquely identifies an entry in the ACL table. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.26.1.4 | ColumndiffServAclHwCounterAceIndex | read-only | current | An index that uniquely identifies an entry of an ACL. This entry might be a compressed ACE (which index is bigger than SYS_ADPT_MAX_NBRS_OF_ACE_OF_SYSTEM) with… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.26.1.5 | ColumndiffServAclHwCounterAceHitCount | read-only | current | Specifies the hardware counter of an ACE entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.27 | TablediffServPolicyMapPortTable | not-accessible | current | Table for policy map of each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.27.1 | RowdiffServPolicyMapPortEntry | not-accessible | current | Entry for diffServPolicyMapPortTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.27.1.1 | ColumndiffServPolicyMapPortIfIndex | not-accessible | current | This object is the interface index of DiffServPolicyMapPortEntry. The interface identified by a particular value of this index is the same interface as identif… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.27.1.2 | ColumndiffServPolicyMapPortDirection | not-accessible | current | Indicates this policy map effect to which direction of traffic. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.27.1.3 | ColumndiffServPolicyMapPortPolicyMapIndex | read-write | current | Specifies the policy map index binded to the interface. The policy map identified by a particular value of this index is associated with the same DiffServPolic… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.27.1.4 | ColumndiffServPolicyMapPortStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table.The status column has six defined values: The status column has six d… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.28 | TablediffServAccessGroupTable | not-accessible | current | Table for specifies access group for ACL on each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.28.1 | RowdiffServAccessGroupEntry | not-accessible | current | Entry for diffServAccessGroupTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.28.1.1 | ColumndiffServAccessGroupIfIndex | not-accessible | current | This object is the interface index of diffServAccessGroupEntry. The interface identified by a particular value of this index is the same interface as identifie… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.28.1.2 | ColumndiffServAccessGroupDirection | not-accessible | current | Indicates this access group effect to which direction of traffic. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.28.1.3 | ColumndiffServAccessGroupType | not-accessible | current | Specifies the access group type, only support bind one ACL per type on a port. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.28.1.4 | ColumndiffServAccessGroupAclIndex | read-write | current | Specifies the ACL index apply to this access group. The index uniquely identifies an entry in diffServAclTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.28.1.5 | ColumndiffServAccessGroupTimeRangeName | read-write | current | The name of the time range entry bound to the access group. This object should be equal to one of the timeRangeName objects in timeRangeTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.28.1.6 | ColumndiffServAccessGroupCounterStatus | read-write | current | The acl counter enable status of this access group. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.28.1.7 | ColumndiffServAccessGroupStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table.The status column has six defined values: The status column has six d… |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.29 | TablediffServTcamTable | not-accessible | current | The conceptual table of all of DiffServTcamEntry. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.29.1 | RowdiffServTcamEntry | not-accessible | current | The conceptual row for diffServTcamTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.29.1.1 | ColumndiffServTcamUnit | not-accessible | current | This object identifies the switch within the system for which this entry contains information. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.29.1.2 | ColumndiffServTcamDevice | not-accessible | current | The device id of the specified unit. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.29.1.3 | ColumndiffServTcamPool | not-accessible | current | The TCAM pool index of the specified unit and device. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.29.1.4 | ColumndiffServTcamPoolCapability | read-only | current | The bitmap value used to identify which functions supported on this pool. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.29.1.5 | ColumndiffServTcamTotal | read-only | current | The total number of TCAM pool entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.29.1.6 | ColumndiffServTcamFree | read-only | current | The free number of TCAM pool entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.16.4.29.1.7 | ColumndiffServTcamUsed | read-only | current | The used number of TCAM pool entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17 | NodesecurityMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.1 | NodeprivateVlanMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.1 | ScalarprivateVlanStatus | read-write | current | This controls whether private VLAN is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.2 | ScalarprivateVlanUplinkPorts | read-write | current | This is the list of uplink ports for private VLAN. They should not overlap with privateVlanDownlinkPorts. Only one port can be set, no multiple ports. 0 will b… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.3 | ScalarprivateVlanDownlinkPorts | read-write | current | This is the list of downlink ports for private VLAN. They should not overlap with privateVlanUplinkPorts. Multiple port setting is permitted. 0 will be display… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.4 | TableprivateVlanVlanTable | not-accessible | current | A table containing private VLAN information on the VLANs which currently exist. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.4.1 | RowprivateVlanVlanEntry | not-accessible | current | A conceptual row containing the private VLAN information on the VLANs for a particular management domain. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.4.1.1 | ColumnprivateVlanVlanIndex | not-accessible | current | The VLAN ID of this private VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.4.1.2 | ColumnprivateVlanVlanType | read-create | current | The VLAN type as defined for Private VLAN feature. Set the value to invalid(1) to destroy an entry. Set other values to create an entry. If an index already ex… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.4.1.3 | ColumnprivateVlanAssoicatedPrimaryVlan | read-create | current | The VLAN ID of the associated primary VLAN used for the private VLAN feature if privateVlanVlanType has the value of isolated(3), community(4). If privateVlanV… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.5 | TableprivateVlanPrivatePortTable | not-accessible | current | A table containing information on the configuration of secondary VLANs on the device ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.5.1 | RowprivateVlanPrivatePortEntry | not-accessible | current | A conceptual row containing information of the configuration of secondary VLANs for each port. An entry is created by the managed system for each interface whi… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.5.1.1 | ColumnprivateVlanPrivatePortIfIndex | not-accessible | current | This is defined as the ifIndex. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.5.1.2 | ColumnprivateVlanPrivatePortSecondaryVlan | read-write | current | The VLAN ID of the secondary VLAN configured on this private port. A private port is a port that allows ingress traffic of the secondary VLAN as well as egress… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.6 | TableprivateVlanPromPortTable | not-accessible | current | A table containing secondary VLAN to primary VLAN remapping information on ports of the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.6.1 | RowprivateVlanPromPortEntry | not-accessible | current | A conceptual row containing secondary VLAN to primary VLAN remapping information for each port. An entry is created by the managed system for each interface wh… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.6.1.1 | ColumnprivateVlanPromPortIfIndex | not-accessible | current | This is defined as ifIndex. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.6.1.2 | ColumnprivateVlanPromPortPrimaryVlanId | read-write | current | The primary VLAN ID of the promiscous port. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.6.1.3 | ColumnprivateVlanPromPortSecondaryRemap | read-only | current | A string of octets containing one bit per VLAN in the management domain on this port. The first octet corresponds to VLANs with VlanIndexOrZero values of 0 thr… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.6.1.4 | ColumnprivateVlanPromPortSecondaryRemap2k | read-only | current | A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 1024 through 2047 in the management domain on this port. The first octe… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.6.1.5 | ColumnprivateVlanPromPortSecondaryRemap3k | read-only | current | A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 2048 through 3071 in the management domain on this port. The first octe… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.6.1.6 | ColumnprivateVlanPromPortSecondaryRemap4k | read-only | current | A string of octets containing one bit per VLAN for VLANs with VlanIndexOrZero values of 3072 through 4095 in the management domain on this port. The first octe… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.8 | TableprivateVlanSessionTable | not-accessible | current | Contains the settings for private VLAN Session. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.8.1 | RowprivateVlanSessionEntry | not-accessible | current | A conceptual row in the privateVlanSession table. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.8.1.1 | ColumnprivateVlanSessionId | not-accessible | current | The session ID that may specifiy certain entry in the table which contains private VLAN session information. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.8.1.2 | ColumnprivateVlanSessionUplinkPorts | read-create | current | This is the list of uplink ports for a session of private VLAN. They should not overlap with the privateVlanSessionPortDownlink of the same session, and they a… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.8.1.3 | ColumnprivateVlanSessionDownlinkPorts | read-create | current | This is the list of downlink ports for a session of private VLAN. They should not overlap with the privateVlanSessionPortUplink of the same session, and they a… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.8.1.4 | ColumnprivateVlanSessionStatus | read-create | current | Set this to valid(1) to create an entry. Sets this to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.9 | ScalarprivateVlanUplinkToUplink | read-write | current | Sets this to blocking(2) to deny the traffic of uplink ports between different sessions. Set this to forwarding(1) to allow the traffic of uplink ports between… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.10 | TableprivateVlanEdgePortTable | not-accessible | current | Contains the settings for Private VLAN Edge. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.10.1 | RowprivateVlanEdgePortEntry | not-accessible | current | A conceptual row in the privateVlanEdgePortTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.10.1.1 | ColumnpvePortIfIndex | not-accessible | current | The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIn… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.1.10.1.2 | ColumnpvePortStatus | read-write | current | This controls whether Private VLAN Edge is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.2 | NodeportSecurityMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.2.1 | TableportSecPortTable | not-accessible | current | The port security(MAC binding) Table. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.2.1.1 | RowportSecPortEntry | not-accessible | current | The entry of portSecPortTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.2.1.1.1 | ColumnportSecPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.2.1.1.2 | ColumnportSecPortStatus | read-write | current | Set enabled(1) to enable port security and set disabled(2) to disable port security. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.2.1.1.3 | ColumnportSecAction | read-write | current | The corresponding actions that will take place when a port is under intrusion, when this variable is set to none(1), no action will be performed, when this var… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.2.1.1.4 | ColumnportSecMaxMacCount | read-write | current | The maximun number of MAC addresses that will be learned and locked. When we change the value of this variable, if the portSecPortStatus is enabled, we will di… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.2.6 | NodeportSecMacAsPermanentMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.2.6.1 | ScalarportSecMacAsPermanentPortIndex | read-write | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.2.6.2 | ScalarportSecMacAsPermanentAction | read-write | current | Set action(2) to convert the learnt secured MAC address into manual configured. When action finsh or no action, the value of this object is noAction(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4 | NoderadiusMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.1 | ScalarradiusServerGlobalAuthPort | read-write | current | Aauthentication port number for RADIUS server. When specified radius server do not set aauthentication port number, this value is used. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.2 | ScalarradiusServerGlobalAcctPort | read-write | current | Accounting port number of RADIUS server. When specified radius server do not set accounting port number, this value is used. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.3 | ScalarradiusServerGlobalKey | read-write | current | Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. When specified radius server do not set … |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.4 | ScalarradiusServerGlobalRetransmit | read-write | current | Maximum number of retransmissions for RADIUS. When specified radius server do not set maximum number of retransmissions, this value is used. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.5 | ScalarradiusServerGlobalTimeout | read-write | current | Timeout for RADIUS. When specified radius server do not set timeout, this value is used. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.7 | TableradiusServerTable | not-accessible | current | The table for RADIUS server. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.7.1 | RowradiusServerEntry | not-accessible | current | The conceptual row for radiusServerTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.7.1.1 | ColumnradiusServerIndex | not-accessible | current | The RADIUS server index in the table. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.7.1.2 | ColumnradiusServerAddress | read-create | current | IP address of a RADIUS server. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.7.1.3 | ColumnradiusServerAuthPortNumber | read-create | current | Authentication port number of RADIUS server. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.7.1.4 | ColumnradiusServerAcctPortNumber | read-create | current | Accounting port number of RADIUS server. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.7.1.5 | ColumnradiusServerKey | read-write | current | Key for RADIUS. This variable can only be written. When this variable is read, it always returns a zero-length string. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.7.1.6 | ColumnradiusServerRetransmit | read-write | current | Timeout for RADIUS. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.7.1.7 | ColumnradiusServerTimeout | read-write | current | Timeout for RADIUS. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.4.7.1.8 | ColumnradiusServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.5 | NodetacacsMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.5.2 | ScalartacacsPlusServerGlobalPortNumber | read-write | current | TCP port number of TACACS+ server. When specified TACACS+ server do not set TCP port number, this this value is used. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.5.3 | ScalartacacsPlusServerGlobalKey | read-write | current | The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When thi… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.5.4 | TabletacacsPlusServerTable | not-accessible | current | The table for TACACS+ server. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.5.4.1 | RowtacacsPlusServerEntry | not-accessible | current | The conceptual row for tacacsPlusServerTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.5.4.1.1 | ColumntacacsPlusServerIndex | not-accessible | current | TACACS+ server index. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.5.4.1.2 | ColumntacacsPlusServerAddress | read-create | current | IP address of a TACACS+ server. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.5.4.1.3 | ColumntacacsPlusServerPortNumber | read-create | current | TCP port number of a TACACS+ server. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.5.4.1.4 | ColumntacacsPlusServerKey | read-create | current | The encryption key used to encrpt the traffic between client and TACACS+ server. Do not use blank spaces in the string. This variable can only be set. When thi… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.5.4.1.8 | ColumntacacsPlusServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6 | NodesshMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.1 | ScalarsshServerStatus | read-write | current | The status of Secure Shell Server. Set this value to enabled(1) to enable SSH server, set this value to disabled(2) to disable the SSH server. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.2 | ScalarsshServerMajorVersion | read-only | current | The major version of the SSH Server. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.3 | ScalarsshServerMinorVersion | read-only | current | The minor version of the SSH Server. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.4 | ScalarsshTimeout | read-write | current | The time interval that the router waits for the SSH client to respond. The range is 1-120. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.5 | ScalarsshAuthRetries | read-write | current | The number of attempts after which the interface is reset. The range is 1-5. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.6 | TablesshConnInfoTable | not-accessible | current | The table for Secure Shell Connection. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.6.1 | RowsshConnInfoEntry | not-accessible | current | The conceptual row for sshConnInfoTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.6.1.1 | ColumnsshConnID | not-accessible | current | The connection ID of the Secure Shell Connection. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.6.1.2 | ColumnsshConnMajorVersion | read-only | current | The SSH major version. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.6.1.3 | ColumnsshConnMinorVersion | read-only | current | The SSH minor version. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.6.1.5 | ColumnsshConnStatus | read-only | current | The SSH connection State. negotiationStart(1) means the SSH is in its negotiation start state, authenticationStart(2) means the SSH is in authentication start … |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.6.1.6 | ColumnsshConnUserName | read-only | current | The user name of the connection. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.6.1.7 | ColumnsshDisconnect | read-write | current | Set the variable to disconnect the connection, noDisconnect(1) will always be obtained when reading this variable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.6.1.8 | ColumnsshConnEncryptionTypeStr | read-only | current | The encryption type of the SSH. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.7 | ScalarsshKeySize | read-write | current | The SSH server key size. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.8 | ScalarsshRsaHostKey1 | read-only | current | The RSA host key segment 1. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.9 | ScalarsshRsaHostKey2 | read-only | current | The RSA host key segment 2. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.10 | ScalarsshRsaHostKey3 | read-only | current | The RSA host key segment 3. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.11 | ScalarsshRsaHostKey4 | read-only | current | The RSA host key segment 4. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.12 | ScalarsshRsaHostKey5 | read-only | current | The RSA host key segment 5. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.13 | ScalarsshRsaHostKey6 | read-only | current | The RSA host key segment 6. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.14 | ScalarsshRsaHostKey7 | read-only | current | The RSA host key segment 7. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.15 | ScalarsshRsaHostKey8 | read-only | current | The RSA host key segment 8. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.16 | ScalarsshDsaHostKey1 | read-only | current | The DSA host key segment 1. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.17 | ScalarsshDsaHostKey2 | read-only | current | The DSA host key segment 2. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.18 | ScalarsshDsaHostKey3 | read-only | current | The DSA host key segment 3. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.19 | ScalarsshDsaHostKey4 | read-only | current | The DSA host key segment 4. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.20 | ScalarsshDsaHostKey5 | read-only | current | The DSA host key segment 5. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.21 | ScalarsshDsaHostKey6 | read-only | current | The DSA host key segment 6. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.22 | ScalarsshDsaHostKey7 | read-only | current | The DSA host key segment 7. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.23 | ScalarsshDsaHostKey8 | read-only | current | The DSA host key segment 8. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.24 | ScalarsshHostKeyGenAction | read-write | current | This variable is for host key generating. For the set behavior: Set it to genRsaKey(2) to generate the RSA host key, and to genDsaKey(3) to generate the DSA ho… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.25 | ScalarsshHostKeyGenStatus | read-only | current | The result of the last KeyGen status. if no key gen action has been performed. you will get unknown(1) status. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.26 | ScalarsshHostKeySaveAction | read-write | current | To save host key from memory to flash. For the set behavior: Set it to save(2) to perform the save operation. For the get behavior: You will get save(1) when t… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.27 | ScalarsshHostKeySaveStatus | read-only | current | The result of the last savekey status. If no save action has been performed, you will get unknown(1) status. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.28 | ScalarsshHostKeyDelAction | read-write | current | To delete the host key. For the set behavior: Set it to delRsaKey(2) to delete the RSA host key, to delDsaKey(3) to delete the DSA host key, or to delBothKeys(… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29 | TablesshUserTable | not-accessible | current | The conceptual table of all of sshUserEntry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1 | RowsshUserEntry | not-accessible | current | The conceptual row for sshUserTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.1 | ColumnsshUserName | not-accessible | current | User Name. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.2 | ColumnsshUserRsaKey1 | read-only | current | The RSA user key segment 1. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.3 | ColumnsshUserRsaKey2 | read-only | current | The RSA user key segment 2. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.4 | ColumnsshUserRsaKey3 | read-only | current | The RSA user key segment 3. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.5 | ColumnsshUserRsaKey4 | read-only | current | The RSA user key segment 4. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.6 | ColumnsshUserRsaKey5 | read-only | current | The RSA user key segment 5. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.7 | ColumnsshUserRsaKey6 | read-only | current | The RSA user key segment 6. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.8 | ColumnsshUserRsaKey7 | read-only | current | The RSA user key segment 7. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.9 | ColumnsshUserRsaKey8 | read-only | current | The RSA user key segment 8. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.10 | ColumnsshUserDsaKey1 | read-only | current | The DSA user key segment 1. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.11 | ColumnsshUserDsaKey2 | read-only | current | The DSA user key segment 2. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.12 | ColumnsshUserDsaKey3 | read-only | current | The DSA user key segment 3. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.13 | ColumnsshUserDsaKey4 | read-only | current | The DSA user key segment 4. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.14 | ColumnsshUserDsaKey5 | read-only | current | The DSA user key segment 5. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.15 | ColumnsshUserDsaKey6 | read-only | current | The DSA user key segment 6. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.16 | ColumnsshUserDsaKey7 | read-only | current | The DSA user key segment 7. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.17 | ColumnsshUserDsaKey8 | read-only | current | The DSA user key segment 8. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.6.29.1.18 | ColumnsshUserKeyDelAction | read-write | current | To delete the user key. For the set behavior: Set it to delRsaKey(2) to delete the RSA user key, to delDsaKey(3) to delete the DSA user key, or to delBothKeys(… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9 | NodeipFilterMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.12 | TableipFilterSnmpInetTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.12.1 | RowipFilterSnmpInetEntry | not-accessible | current | This entry includes an IP address range which the system will allow to connect to this device through SNMP. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.12.1.1 | ColumnipFilterSnmpInetAddressType | not-accessible | current | The type of IP address filter. Only supports IPv4 and IPv6 address types. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.12.1.2 | ColumnipFilterSnmpInetAddressStart | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.12.1.3 | ColumnipFilterSnmpInetAddressEnd | read-create | current | The end IP address. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.12.1.4 | ColumnipFilterSnmpInetStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.13 | TableipFilterHttpInetTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.13.1 | RowipFilterHttpInetEntry | not-accessible | current | This entry includes an IP address range which the system will allow to connect to this device through SNMP. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.13.1.1 | ColumnipFilterHttpInetAddressType | not-accessible | current | The type of IP address filter . Only supports IPv4 and IPv6 address types. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.13.1.2 | ColumnipFilterHttpInetAddressStart | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.13.1.3 | ColumnipFilterHttpInetAddressEnd | read-create | current | The end IP address. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.13.1.4 | ColumnipFilterHttpInetStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.14 | TableipFilterTelnetInetTable | not-accessible | current | A list of IP address entries. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.14.1 | RowipFilterTelnetInetEntry | not-accessible | current | This entry includes an IP address range which the system will allow them to connect to this device through SNMP. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.14.1.1 | ColumnipFilterTelnetInetAddressType | not-accessible | current | The type of IP address filter . Only supports IPv4 and IPv6 address types. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.14.1.2 | ColumnipFilterTelnetInetAddressStart | not-accessible | current | The start IP address. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.14.1.3 | ColumnipFilterTelnetInetAddressEnd | read-create | current | The end IP address. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.14.1.4 | ColumnipFilterTelnetInetStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.15 | NodeipFilterAllClientCtl | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.15.1 | ScalaripFilterAllClientCtlInetAddressType | read-write | current | The type of IP address filter. Only supports IPv4 and IPv6 address types. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.15.2 | ScalaripFilterAllClientCtlInetAddressStart | read-write | current | The start IP address. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.15.3 | ScalaripFilterAllClientCtlInetAddressEnd | read-write | current | The end IP address. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.9.15.4 | ScalaripFilterAllClientCtlAction | read-write | current | Action for IP filter control. Set this object to create(2) to create entries in the ipFilterSnmpInetTable, ipFilterHttpInetTable and ipFilterTelnetInetTable. S… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.10 | NodeuserAuthMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.10.3 | ScalaruserAuthEnablePassword | read-write | current | Set enable password or delete enable password. NULL is used to delete the enable password. The password is starting with alphanumeric. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.10.4 | ScalaruserAuthMethod | read-write | current | Set user authencation method for system. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.10.5 | TableuserAuthTable | not-accessible | current | This table is for creating the new user. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.10.5.1 | RowuserAuthEntry | not-accessible | current | Entries in this table correspond to the users entries in system. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.10.5.1.1 | ColumnuserAuthUserName | not-accessible | current | The name of the user. The user name is starting with alphanumeric. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.10.5.1.2 | ColumnuserAuthPassword | read-create | current | Specifies the user password. zero length input will set the user enrty without password. If the user is not exist, it will create the user with the giving pass… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.10.5.1.3 | ColumnuserAuthPrivilege | read-create | current | Specifies the user level. If the user is not exist, it will create the user with the giving privilege with none password. Privilege 15 is maximum privilege tha… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.10.5.1.4 | ColumnuserAuthPublicKey | read-only | current | User public key, the value can be 'RSA' or 'DSA' or 'Both' or 'None'. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.10.5.1.5 | ColumnuserAuthStatus | read-create | current | This node is used to create the user entry by '1' and to delete one user entry by '0'. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.11 | Nodedot1xMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.11.1 | Tabledot1xAuthConfigExtTable | not-accessible | current | The extension table of dot1xAuthConfigTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.11.1.1 | Rowdot1xAuthConfigExtEntry | not-accessible | current | The entry of dot1xAuthConfigExtTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.11.1.1.1 | Columndot1xAuthConfigExtOperMode | read-write | current | The operation mode of dot1x port which allows host connection to 802.1x-authorized ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.11.1.1.2 | Columndot1xAuthConfigExtMultiHostMaxCnt | read-write | current | The maximum number of hosts when the dot1xAuthConfigExtOperMode is multiHost(2). When the operation Mode is singleHost(1), we can ignore this variables. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.11.1.1.3 | Columndot1xAuthConfigExtPortIntrusionAction | read-write | current | Responses to intrusion when the authentication is failed; block-traffic(1) means that to block traffic when the authentication is failed and guest-vlan(2) mean… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.11.3 | Scalardot1xEapolPassThrough | read-write | current | When this variable is enabled(1), EAPOL frames will be forwarded to all ports where the Spanning Tree status is forwarding. When this variable is disabled(2), … |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12 | NodeaaaMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.1 | TableaaaMethodTable | not-accessible | current | Contains the settings needed for accounting. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.1.1 | RowaaaMethodEntry | not-accessible | current | A conceptual row in the aaaMethodTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.1.1.1 | ColumnaaaMethodIndex | not-accessible | current | Specifies the index for the entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.1.1.2 | ColumnaaaMethodName | read-create | current | Name for the method. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.1.1.3 | ColumnaaaMethodGroupName | read-create | current | Name for the server to use, pointing to aaaRadiusGroupName or aaaTacacsPlusGroupName. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.1.1.4 | ColumnaaaMethodMode | read-create | current | start-stop(1),sends a 'start' accounting notice at the beginning of a process and a 'stop' accounting notice at the end of a process. The 'start' accounting re… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.1.1.5 | ColumnaaaMethodStatus | read-create | current | Set to 1 to initiate the aaaMethodTable, 2 to destroy the table. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.1.1.6 | ColumnaaaMethodClientType | read-create | current | dot1x(1): Provides accounting service for 802.1x activity; exec(2): Provides accounting service for EXEC connection such as Telnet, SSH or console. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.2 | TableaaaRadiusGroupTable | not-accessible | current | Uses a subset of RADIUS servers for accounting as defined by the server group |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.2.1 | RowaaaRadiusGroupEntry | not-accessible | current | A conceptual row of aaaRadiusGroupEntry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.2.1.1 | ColumnaaaRadiusGroupIndex | not-accessible | current | Specifies the index for the entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.2.1.2 | ColumnaaaRadiusGroupServerBitMap | read-create | current | Identifies which RADIUS sever to use, each bit points to each radius server. 80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radi… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.2.1.3 | ColumnaaaRadiusGroupName | read-create | current | Uses a subset of servers for accounting as defined by the server group. The same name as aaaTacasPlusGroupName is not allowed. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.2.1.4 | ColumnaaaRadiusGroupStatus | read-create | current | Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.3 | TableaaaTacacsPlusGroupTable | not-accessible | current | Uses a subset of TACACS+ servers for accounting as defined by the server group |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.3.1 | RowaaaTacacsPlusGroupEntry | not-accessible | current | A conceptual row of aaaTacacsPlusGroupEntry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.3.1.1 | ColumnaaaTacacsPlusGroupIndex | not-accessible | current | Specifies the index for the entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.3.1.2 | ColumnaaaTacacsPlusGroupServerBitMap | read-create | current | Identifies which TACACS+ sever to use. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.3.1.3 | ColumnaaaTacacsPlusGroupName | read-create | current | Uses a subset of servers for accounting as defined by the server group. We can't have the same name as aaaRadiusGroupName |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.3.1.4 | ColumnaaaTacacsPlusGroupStatus | read-create | current | Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.4 | ScalaraaaUpdate | read-write | current | Specifies the periodic interim accounting records to be sent to the accounting server and periodic intervals to send accounting update records(in minutes). |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.5 | TableaaaAccountTable | not-accessible | current | Specifies an interface or a set of interfaces that the accounting method list will be applied to. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.5.1 | RowaaaAccountEntry | not-accessible | current | A conceptual row of aaaAccountTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.5.1.1 | ColumnaaaAccountIfIndex | not-accessible | current | Defined as the ifIndex |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.5.1.2 | ColumnaaaAccountMethodName | read-create | current | Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.5.1.3 | ColumnaaaAccountProtocol | read-only | current | Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.5.1.4 | ColumnaaaAccountStatus | read-create | current | Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.9 | TableaaaAccExecTable | not-accessible | current | Specifies an interface or a set of interfaces that the accounting method list will be applied to. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.9.1 | RowaaaAccExecEntry | not-accessible | current | A conceptual row of aaaAccExecTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.9.1.1 | ColumnaaaAccExecIndex | not-accessible | current | The method of accessing CLI management. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.12.9.1.2 | ColumnaaaAccExecMethodName | read-create | current | Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13 | NodenetworkAccessMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.2 | TablenetworkAccessPortTable | not-accessible | current | A table contains the information of network access about every port. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.2.1 | RownetworkAccessPortEntry | not-accessible | current | A conceptual row in the networkAccessPort table. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.2.1.1 | ColumnnetworkAccessPortPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this port index is the same inte… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.2.1.2 | ColumnnetworkAccessPortDynamicVlan | read-write | current | Sets enabled(1) to enable dynamic VLAN assigment and sets disabled(2) to disable dynamic VLAN assigment. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.2.1.3 | ColumnnetworkAccessPortMaxMacCount | read-write | current | Specifies the maximum number of authenticated MAC address. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.2.1.4 | ColumnnetworkAccessPortMode | read-write | current | Specifies the secure port mode. enabled(1) means that Mac address authentication is used and disabled(2) means that the authentication is disabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.2.1.5 | ColumnnetworkAccessPortMacFilter | read-write | current | Specifies the MAC filter ID, Set this variable to zero to disable MAC filter. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.2.1.6 | ColumnnetworkAccessPortGuestVlan | read-write | current | Specifies the guest VLAN ID. To disable the VLAN, set the value to 0. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.2.1.7 | ColumnnetworkAccessPortLinkDetectionStatus | read-write | current | Set this object to enabled(1) to enable link detection. Set this object to disabled(2) to disable link detection. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.2.1.8 | ColumnnetworkAccessPortLinkDetectionMode | read-write | current | Specifies the detection event for a port. Set this object to linkUp(1) to detect a link-up event. Set this object to linkDown(2) to detect a link-down event. S… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.2.1.9 | ColumnnetworkAccessPortLinkDetectionAciton | read-write | current | Specifies the action to take when a networkAccessPortLinkDetection event is triggered. Set this object to trap(1) to send a trap when a networkAccessPortLinkDe… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.2.1.10 | ColumnnetworkAccessPortDynamicQos | read-write | current | Set this object to enabled(1) to enable Dynamic QoS. Set this object to disabled(2) to disable Dynamic QoS. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.3 | NodenetworkAccessClearMacAddressMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.3.1 | ScalarnetworkAccessClearMacAddressAttribute | read-write | current | Attribute for clearing Mac address. Specifies the certain attribute in Mac address table. all(1) indicates both reauthorized and learnt secure MAC address; sta… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.3.2 | ScalarnetworkAccessClearMacAddressMacAddress | read-write | current | Specifies MAC address in the MAC address table for clearing MAC address. '000000' represents that no MAC address is specified. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.3.3 | ScalarnetworkAccessClearMacAddressPort | read-write | current | The specifies port in the MAC address table for clearing MAC address. '0' represents that no port is specified. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.3.4 | ScalarnetworkAccessClearMacAddressAction | read-write | current | Action for clearing MAC address . When setting this object to clear(2) to begin the clearing MAC address operation, a particular MAC address is cleared from th… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.4 | TablenetworkAccessMacAddressTable | not-accessible | current | Contains the information of network access MAC addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.4.1 | RownetworkAccessMacAddressEntry | not-accessible | current | A conceptual row in the networkAccessMacAddress table. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.4.1.1 | ColumnnetworkAccessMacAddressAddress | not-accessible | current | Specifies the authenticated MAC address. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.4.1.2 | ColumnnetworkAccessMacAddressPort | not-accessible | current | Specifies the port of authenticated MAC address. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.4.1.3 | ColumnnetworkAccessMacAddressInetAddressType | read-only | current | This object indicates the type of IP address denoted in networkAccessMacAddressRadiusServerInetAddress type. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.4.1.4 | ColumnnetworkAccessMacAddressRadiusServerInetAddress | read-only | current | Displays the IP address of radius server that authenticates the specified Mac address. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.4.1.5 | ColumnnetworkAccessMacAddressTime | read-only | current | Displays the authentication time of the authenticated MAC address. The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'. 'yyyy' is a four-digit year… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.4.1.6 | ColumnnetworkAccessMacAddressAttribute | read-only | current | Displays the attribute of an authenticated MAC address. static(1) indicates resauthorized secure MAC address. dynamic(2) indicates learnt secure MAC address. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.5 | ScalarnetworkAccessAging | read-write | current | Set this object to enabled(1) to enable MAC address aging feature. Set this object to disabled(2) to disable MAC address aging feature. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.6 | TablenetworkAccessMacFilterWithMaskTable | not-accessible | current | Contains the settings for MAC filter. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.6.1 | RownetworkAccessMacFilterWithMaskEntry | not-accessible | current | A conceptual row in the networkAccessMacFilterWithMaskTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.6.1.1 | ColumnnetworkAccessMacFilterWithMaskID | not-accessible | current | Specifies the MAC filter ID. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.6.1.2 | ColumnnetworkAccessMacFilterWithMaskMacAddress | not-accessible | current | Specifies the MAC address to be filtered. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.6.1.3 | ColumnnetworkAccessMacFilterWithMaskMacAddressMask | not-accessible | current | Specifies the MAC mask to be filtered. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.13.6.1.4 | ColumnnetworkAccessMacFilterWithMaskStatus | read-create | current | Set this object to valid(1) to create an entry. Set this object to invalid(2) to destroy an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.14 | NodemacAuthMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.14.1 | ScalarmacAuthReauthTime | read-write | current | Specifies the reauthentication time period. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.14.2 | TablemacAuthPortTable | not-accessible | current | Contains the settings for mac authentication of each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.14.2.1 | RowmacAuthPortEntry | not-accessible | current | A conceptual row in the macAuthPort table. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.14.2.1.1 | ColumnmacAuthPortIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the port table. The interface identified by a particular value of this index is the same interfac… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.14.2.1.2 | ColumnmacAuthPortMaxMacCount | read-write | current | Specifies the maximum number of authenticated MAC addresses for MAC authentication. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.14.2.1.3 | ColumnmacAuthPortIntrusionAction | read-write | current | Responses to intrusion when the authentication is failed. block-traffic(1) : denies network access to an unauthorized client; pass-traffic(2) : allows unauthor… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15 | NodewebAuthMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.1 | ScalarwebAuthSystemAuthControl | read-write | current | Sets enabled(1) to enable WebAuth feature and sets disabled(2) to disable WebAuth feature. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.5 | ScalarwebAuthSessionTimeout | read-write | current | For authenticated success users, they can use internet service during a certain period. Whenever this period expires, users need to be re-authenticated again. … |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.6 | ScalarwebAuthQuietPeriod | read-write | current | Specifies the re-authentication interval when the authentication fail attempts reach the webAuthLoginAttempts value. Unauthenticated user won't be authenticate… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.7 | ScalarwebAuthLoginAttempts | read-write | current | Specifies the counter that configures the authentication fail times for a client. If authentication fail times reaches the specified value, the client are not … |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.8 | NodewebAuthReauthenticateMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.8.1 | ScalarwebAuthReauthenticatePort | read-write | current | Specifies the port to re-authenticate for all of its authenticated hosts. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.8.2 | ScalarwebAuthReauthenticateInetAddressType | read-write | current | Specifies host type to re-authenticate. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.8.3 | ScalarwebAuthReauthenticateInetAddress | read-write | current | Specificies host to re-authenticate. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.8.4 | ScalarwebAuthReauthenticateAction | read-write | current | Action for WebAuth re-authenication. When setting this object to reauth(2) to begin the re-authenticated operation, a particular user is re-authenticated. When… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.9 | TablewebAuthPortConfigTable | not-accessible | current | Contains the settings for web authentication of each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.9.1 | RowwebAuthPortConfigEntry | not-accessible | current | A conceptual row in the webAuthPortConfigTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.9.1.1 | ColumnwebAuthPortConfigPortIndex | not-accessible | current | The port number of the port that may specify certain entry in the table which contains web authentication information. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.9.1.2 | ColumnwebAuthPortConfigStatus | read-write | current | Sets enabled(1) to enable web authentication feature for each port and sets disabled(2) to disable web authentication for each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.9.1.3 | ColumnwebAuthPortConfigAuthenticatedHostCount | read-only | current | Displays the authenticated host counts for each port |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.10 | TablewebAuthPortInfoTable | not-accessible | current | Contains the information for web authentication of each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.10.1 | RowwebAuthPortInfoEntry | not-accessible | current | A conceptual row in the webAuthPortTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.10.1.1 | ColumnwebAuthPortInfoPortIndex | not-accessible | current | The port number for which this entry contains web authentication information. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.10.1.2 | ColumnwebAuthPortInfoPortAuthSuccessIndex | not-accessible | current | The authentication success number of port for which this entry contains web authentication information. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.10.1.3 | ColumnwebAuthPortInfoInetAddressType | read-only | current | This object indicates the type of IP address denoted in webAuthPortInfoIpAddress type. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.10.1.4 | ColumnwebAuthPortInfoInetAddress | read-only | current | The IP address which may specify the entry containing web authentication information. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.10.1.5 | ColumnwebAuthPortInfoRemainingSessiontime | read-only | current | The remaining session time for authenticated hosts. During this period, they may use internet resource. When the session time expires, they will need to re-aut… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.15.10.1.6 | ColumnwebAuthPortInfoStatus | read-only | current | Displays the web authentication status for each port. authenticated (1) means the user is authenticated. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.16 | NodedosMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.16.1 | Nodesystem | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.16.1.2 | NodedosLand | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.16.1.2.1 | ScalardosLandStatus | read-write | current | The status of Land protection. Set this to enabled(1) to enable the feature, and set this to disabled(2) to disable the feature. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.16.1.5 | NodedosTcpNullScan | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.16.1.5.1 | ScalardosTcpNullScanStatus | read-write | current | The status of TCP Null-scan protection. Set this to enabled(1) to enable the feature, and set this to disabled(2) to disable the feature. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.16.1.6 | NodedosTcpSynFinScan | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.16.1.6.1 | ScalardosTcpSynFinScanStatus | read-write | current | The status of TCP SYN FIN scan protection. Set this to enabled(1) to enable the feature, and set this to disabled(2) to disable the feature. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.16.1.7 | NodedosTcpXmasScan | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.16.1.7.1 | ScalardosTcpXmasScanStatus | read-write | current | The status of TCP Xmas-scan protection. Set this to enabled(1) to enable the feature, and set this to disabled(2) to disable the feature. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.17 | NodeappFilterMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.17.17.1 | TableappFilterPortTable | not-accessible | current | The application filter Table. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.17.1.1 | RowappFilterPortEntry | not-accessible | current | The entry of appFilterPortTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.17.17.1.1.1 | ColumnappFilterPortIndex | not-accessible | current | The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIn… |
| 1.3.6.1.4.1.52642.2.1.45.1.17.17.1.1.2 | ColumnappFilterProtocolType | not-accessible | current | The protocol type define some specific packets which are supported on this function |
| 1.3.6.1.4.1.52642.2.1.45.1.17.17.1.1.3 | ColumnappFilterPktStatus | read-write | current | Set discard(1) to discard packet and set default(0) to transmit packet in default behavior. |
| 1.3.6.1.4.1.52642.2.1.45.1.19 | NodesysLogMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.19.1 | ScalarsysLogStatus | read-write | current | Whether the system log is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.2 | ScalarsysLogHistoryFlashLevel | read-write | current | Severity level for logging to flash. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.3 | ScalarsysLogHistoryRamLevel | read-write | current | Severity level for logging to RAM. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.6 | NoderemoteLogMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.19.6.1 | ScalarremoteLogStatus | read-write | current | Whether the remote log system is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.6.2 | ScalarremoteLogLevel | read-write | current | Severity level for remote log. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.6.3 | ScalarremoteLogFacilityType | read-write | current | The facility type for remote log. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.6.7 | TableremoteLogServerInetTable | not-accessible | current | A table for storing the remote log server list. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.6.7.1 | RowremoteLogServerInetEntry | not-accessible | current | A conceptual row for remoteLogServerInetTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.6.7.1.1 | ColumnremoteLogServerInetAddressType | not-accessible | current | Indicates the type of address denoted in remoteLogServerInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.6.7.1.2 | ColumnremoteLogServerInetAddress | not-accessible | current | The IP address of the remote log Server. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.6.7.1.3 | ColumnremoteLogServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.6.7.1.4 | ColumnremoteLogServerUdpPort | read-write | current | The UDP port number of the remote log Server |
| 1.3.6.1.4.1.52642.2.1.45.1.19.7 | NodesmtpMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.19.7.1 | ScalarsmtpStatus | read-write | current | Set enabled(1) to enable the SMTP, set disabled(2) to disable the SMTP. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.7.2 | ScalarsmtpSeverityLevel | read-write | current | Specify the SMTP minimum severity level to send the event message. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.7.3 | ScalarsmtpSourceEMail | read-write | current | SMTP source email address, the sender's mail address that appears in the 'From' field of the mail. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.7.4 | TablesmtpServerIpTable | not-accessible | current | The SMTP server IP table. The maximum servers to be added is 3. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.7.4.1 | RowsmtpServerIpEntry | not-accessible | current | A conceptual row of the smtpServerIpTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.7.4.1.1 | ColumnsmtpServerIp | accessible-for-notify | current | SMTP mail server's IP address. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.7.4.1.2 | ColumnsmtpServerIpStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.7.5 | TablesmtpDestEMailTable | not-accessible | current | The table of the destination e-mail address. The maximum numbers of destination email address to be added is 5. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.7.5.1 | RowsmtpDestEMailEntry | not-accessible | current | A conceptual row of the smtpDestEMailTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.7.5.1.1 | ColumnsmtpDestEMail | not-accessible | current | SMTP destination e-mail address. |
| 1.3.6.1.4.1.52642.2.1.45.1.19.7.5.1.2 | ColumnsmtpDestEMailStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.20 | NodelineMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.20.1 | NodeconsoleMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.20.1.1 | ScalarconsoleDataBits | read-write | current | Number of data bits. |
| 1.3.6.1.4.1.52642.2.1.45.1.20.1.2 | ScalarconsoleParity | read-write | current | Defines the generation of a parity bit. |
| 1.3.6.1.4.1.52642.2.1.45.1.20.1.3 | ScalarconsoleBaudRate | read-write | current | Baud rate: Valid values are 115200, 57600, 38400, 19200, and 9600. |
| 1.3.6.1.4.1.52642.2.1.45.1.20.1.4 | ScalarconsoleStopBits | read-write | current | The console stop bits, valid values are stopbits1(1) or stopbits2(2) |
| 1.3.6.1.4.1.52642.2.1.45.1.20.1.5 | ScalarconsoleExecTimeout | read-write | current | In a serial console, use the consoleExecTimeout variable to set the interval that the EXEC command interpreter waits until user input is detected; set the valu… |
| 1.3.6.1.4.1.52642.2.1.45.1.20.1.6 | ScalarconsolePasswordThreshold | read-write | current | The number of failed console logon attempts that may be made before the system will not accept a further attempt in the time specified by consoleSilentTime. A … |
| 1.3.6.1.4.1.52642.2.1.45.1.20.1.7 | ScalarconsoleSilentTime | read-write | current | The length of time that the management console is inaccessible after the number of failed logon attempts has reached consolePasswordThreshold. A value of 0 dis… |
| 1.3.6.1.4.1.52642.2.1.45.1.20.1.10 | ScalarconsoleLoginResponseTimeout | read-write | current | Console login response timeout setting. |
| 1.3.6.1.4.1.52642.2.1.45.1.20.2 | NodetelnetMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.20.2.4 | ScalartelnetStatus | read-write | current | To enable or disable the telnet function. Any new telnet request will be rejected and all current telnet sessions will be terminated if this status is set to d… |
| 1.3.6.1.4.1.52642.2.1.45.1.20.2.5 | ScalartelnetPortNumber | read-write | current | The telnet session port number. |
| 1.3.6.1.4.1.52642.2.1.45.1.20.3 | NodevtyMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.20.3.1 | ScalarvtyExecTimeout | read-write | current | Specifies the interval that the system waits for user input before terminating the current session. |
| 1.3.6.1.4.1.52642.2.1.45.1.20.3.2 | ScalarvtyPasswordThreshold | read-write | current | The number of failed logon attempts that may be made before the system will not accept a further attempt to log on. Setting to 0 means disabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.20.3.3 | ScalarvtyLoginResponseTimeout | read-write | current | Login response timeout setting. |
| 1.3.6.1.4.1.52642.2.1.45.1.20.3.4 | ScalarvtyMaxSession | read-write | current | The maximum number of allowed sessions. |
| 1.3.6.1.4.1.52642.2.1.45.1.20.3.5 | ScalarvtySilentTime | read-write | current | The time the system waits before etablishing a new session after the number of failed logins reaches the specified limit. Setting to 0 means disabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.23 | NodesysTimeMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.23.1 | NodesntpMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.23.1.1 | ScalarsntpStatus | read-write | current | Set enabled(1) to enable the SNTP, set disabled(2) to disable the SNTP. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.1.2 | ScalarsntpServiceMode | read-only | current | Service mode. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.1.3 | ScalarsntpPollInterval | read-write | current | Polling interval. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.1.4 | TablesntpServerTable | not-accessible | current | Table for SNTP servers. IP addresses must occupy contiguous indexes, starting from 1. If a removed entry is not the last entry, the table will be shifted to co… |
| 1.3.6.1.4.1.52642.2.1.45.1.23.1.4.1 | RowsntpServerEntry | not-accessible | current | Entry for SNTP servers. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.1.4.1.1 | ColumnsntpServerIndex | not-accessible | current | The index of a server. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.1.4.1.4 | ColumnsntpServerInetAddressType | read-write | current | Indicates the type of address denoted in sntpServerInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.1.4.1.5 | ColumnsntpServerInetAddress | read-write | current | The IP address of a time server. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.1.4.1.6 | ColumnsntpServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.2 | ScalarsysCurrentTime | read-write | current | This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the English name of the month. '_d' is… |
| 1.3.6.1.4.1.52642.2.1.45.1.23.3 | ScalarsysTimeZone | read-write | current | This is a text string in the following form: '[s]hh:mm'. '[s]' is a plus-or-minus sign. For UTC, this is omitted. For a positive offset, this is '+'. For a neg… |
| 1.3.6.1.4.1.52642.2.1.45.1.23.4 | ScalarsysTimeZoneName | read-write | current | The name of the time zone. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5 | NodentpMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.1 | ScalarntpStatus | read-write | current | Set enabled(1) to enable the NTP, set disabled(2) to disable the NTP. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.2 | ScalarntpServiceMode | read-only | current | Service mode. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.3 | ScalarntpPollInterval | read-only | current | Polling interval in seconds. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.4 | ScalarntpAuthenticateStatus | read-write | current | Set enabled(1) to enable the NTP Authenticate, set disabled(2) to disable the NTP. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.5 | TablentpServerTable | not-accessible | current | Table for NTP servers |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.5.1 | RowntpServerEntry | not-accessible | current | Entry for NTP servers. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.5.1.1 | ColumnntpServerIpAddress | not-accessible | current | The IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index is 0. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.5.1.2 | ColumnntpServerVersion | read-only | current | NTP version. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.5.1.3 | ColumnntpServerKeyId | read-write | current | Key for a NTP server. This variable can only be written. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.5.1.4 | ColumnntpServerStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.6 | TablentpAuthKeyTable | not-accessible | current | Table for NTP Authentication keys |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.6.1 | RowntpAuthKeyEntry | not-accessible | current | Entry for NTP Authentication keys. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.6.1.1 | ColumnntpAuthKeyId | not-accessible | current | The index of a Authentication key. This table has fixed size. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.6.1.2 | ColumnntpAuthKeyWord | read-create | current | The Authentication key word is used to created a key by the MD5 And the max length is 32. |
| 1.3.6.1.4.1.52642.2.1.45.1.23.5.6.1.3 | ColumnntpAuthKeyStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.24 | NodefileMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.24.1 | NodefileCopyMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.24.1.1 | ScalarfileCopySrcOperType | read-write | current | |
| 1.3.6.1.4.1.52642.2.1.45.1.24.1.2 | ScalarfileCopySrcFileName | read-write | current | The source file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has been… |
| 1.3.6.1.4.1.52642.2.1.45.1.24.1.3 | ScalarfileCopyDestOperType | read-write | current | See the description for fileCopySrcOperType. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.1.4 | ScalarfileCopyDestFileName | read-write | current | The destination file name for fileCopyMgt when a copy operation is next requested via this MIB. This value is set to a zero length string when no file name has… |
| 1.3.6.1.4.1.52642.2.1.45.1.24.1.5 | ScalarfileCopyFileType | read-write | current | Type of file to copy in fileCopyMgt. opcode(1) indicates operation code, config(2) indicates configuration file. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.1.7 | ScalarfileCopyUnitId | read-write | current | Specifies the switch unit for stackable devices. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.1.8 | ScalarfileCopyAction | read-write | current | Set this object to copy(2) to begin the copy operation. When the device is not copying, this object will have a value of notCopying(1). Setting this object to … |
| 1.3.6.1.4.1.52642.2.1.45.1.24.1.9 | ScalarfileCopyStatus | read-only | current | The status of the last copy procedure, if any. This object will have a value of fileCopyUnknown(18) if no copy operation has been performed. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.1.20 | ScalarfileCopyServerInetAddressType | read-write | current | Internet address type of the remote server. Only ipv4(1) type is supported. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.1.21 | ScalarfileCopyServerInetAddress | read-write | current | Internet address of the remote server. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.1.22 | ScalarfileCopyServerUserName | read-write | current | Login user name for the remote server. When this variable is empty, the system will use 'anonymous' as user name to log in to the remote server. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.1.23 | ScalarfileCopyServerPassword | read-write | current | Login password for the remote server. This variable can only be written. When this variable is read, it always returns a zero-length string. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.2 | NodefileInfoMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.24.2.1 | TablefileInfoTable | not-accessible | current | This table contain the information of the file system; we can also perform the delete, set startup file operation. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.2.1.1 | RowfileInfoEntry | not-accessible | current | A conceptually row for fileInfoTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.2.1.1.1 | ColumnfileInfoUnitID | not-accessible | current | The switch unit in a stacking system, in a non-stacking system, this value is always 1. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.2.1.1.2 | ColumnfileInfoFileName | not-accessible | current | The file Name of the file System in the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.2.1.1.3 | ColumnfileInfoFileType | read-only | current | The file type of the file System in the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.2.1.1.4 | ColumnfileInfoIsStartUp | read-write | current | This flag indicate whether this file is a startup file. Set this object to true(1) to indicate that this is a startup file. Setting this object to false(2) is … |
| 1.3.6.1.4.1.52642.2.1.45.1.24.2.1.1.5 | ColumnfileInfoFileSize | read-only | current | The sizes( in bytes) of the file. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.2.1.1.6 | ColumnfileInfoCreationTime | read-only | current | The creation time of the file, This is a text string in the following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters of the Eng… |
| 1.3.6.1.4.1.52642.2.1.45.1.24.2.1.1.7 | ColumnfileInfoDelete | read-write | current | Write this object to delete(2) to delete a file, when read, this always return noDelete(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.24.3 | TablefileAutoDownloadResultTable | not-accessible | current | This table contains file auto download result information. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.3.1 | RowfileAutoDownloadResultEntry | not-accessible | current | A conceptual row for fileAutoDownloadResultTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.3.1.1 | ColumnfileAutoDownloadResultUnitID | not-accessible | current | The switch unit in a stacking system, in a non-stacking system, this value is always 1. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.3.1.2 | ColumnfileAutoDownloadResultAction | read-only | current | The status of the auto download action. value copying(2) will be obtained if the auto download action is currently processing, or value notCopying(1) will be o… |
| 1.3.6.1.4.1.52642.2.1.45.1.24.3.1.3 | ColumnfileAutoDownloadResultStatus | read-only | current | The last auto download result status. value fileCopyUnknown(18) will be obtained if no download action has been performed before. |
| 1.3.6.1.4.1.52642.2.1.45.1.24.4 | NodefileAutoUpgradeMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.24.4.1 | ScalarfileAutoUpgradeOpCodeStatus | read-write | current | Set this variable to enabled(1) to enable the device to automatically upgrade the current software image when a new version is detected. Set this variable to d… |
| 1.3.6.1.4.1.52642.2.1.45.1.24.4.2 | ScalarfileAutoUpgradeOpCodePath | read-write | current | The URL (Universal Resource Location) of the image file location for automatic upgrades. The URL schema can be set to TFTP. The Hostname is the IP address of t… |
| 1.3.6.1.4.1.52642.2.1.45.1.24.4.3 | ScalarfileAutoUpgradeOpCodeFileName | read-only | current | The file name of the image file. |
| 1.3.6.1.4.1.52642.2.1.45.1.26 | NodednsMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.26.1 | ScalardnsDomainLookup | read-write | current | To enable the IP Domain Naming System (DNS)-based host name-to-address translation. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.2 | ScalardnsDomainName | read-write | current | To define a default domain name to complete unqualified host names (names without a dotted-decimal domain name). |
| 1.3.6.1.4.1.52642.2.1.45.1.26.7 | TablednsCacheTable | not-accessible | current | To display the RRs in DNS cache. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.7.1 | RowdnsCacheEntry | not-accessible | current | A conceptual row for the dnsCacheTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.7.1.1 | ColumndnsCacheIndex | not-accessible | current | The entry sequence number. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.7.1.2 | ColumndnsCacheFlag | read-only | current | Always get 4, means this record is unreliable. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.7.1.3 | ColumndnsCacheType | read-only | current | Cache Type: address(1); cname(2). |
| 1.3.6.1.4.1.52642.2.1.45.1.26.7.1.5 | ColumndnsCacheTtl | read-only | current | The DNS cache TTL. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.7.1.6 | ColumndnsCacheDomain | read-only | current | The DNS cache domain. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.7.1.7 | ColumndnsCacheInetAddressType | read-only | current | Indicates the type of address denoted in dnsHostAddrInetAddress type. Only ipv4(1) and ipv6(2) types are supported. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.7.1.8 | ColumndnsCacheInetAddress | read-only | current | IP address of DNS cache item. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.8 | TablednsHostTable | not-accessible | current | The conceptual table of dnsHostEntry. The dnsHostTable and dnsHostAddrTable are used to define static host name-to-address mapping. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.8.1 | RowdnsHostEntry | not-accessible | current | A conceptual row for the dnsHostTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.8.1.1 | ColumndnsHostIndex | not-accessible | current | The entry sequence number. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.8.1.2 | ColumndnsHostName | read-create | current | Host name. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.8.1.3 | ColumndnsHostStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.9 | TablednsHostAddrTable | not-accessible | current | The conceptual table of dnsHostAddrEntry. The dnsHostTable and dnsHostAddrTable are used to define static host name-to-address mapping. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.9.1 | RowdnsHostAddrEntry | not-accessible | current | A conceptual row for the dnsHostAddrTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.9.1.1 | ColumndnsHostAddrInetAddressType | not-accessible | current | Indicates the type of address denoted in dnsHostAddrInetAddress type. Only ipv4(1), ipv6(2) and ipv6z(4) type are supported. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.9.1.2 | ColumndnsHostAddrInetAddress | not-accessible | current | Specifies the address of the host. Adding one address to two different hosts is not allowed. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.9.1.3 | ColumndnsHostAddrStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.10 | TablednsDomainListTable | not-accessible | current | This table defines a list of default domain names to complete unqualified host names. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.10.1 | RowdnsDomainListEntry | not-accessible | current | A conceptual row for the dnsDomainListTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.10.1.1 | ColumndnsDomainListIndex | not-accessible | current | The entry sequence number. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.10.1.2 | ColumndnsDomainListName | read-create | current | Domain name. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.10.1.3 | ColumndnsDomainListStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.11 | TablednsNameServerInetTable | not-accessible | current | Specifies the address of one or more name servers to use for name and address resolution. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.11.1 | RowdnsNameServerInetEntry | not-accessible | current | A conceptual row for dnsNameServerInetTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.11.1.1 | ColumndnsNameServerInetAddressType | not-accessible | current | Type of address. Only ipv4(1), ipv6(2) and ipv6z(4) types are supported. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.11.1.2 | ColumndnsNameServerInetAddress | not-accessible | current | IP address of name server. |
| 1.3.6.1.4.1.52642.2.1.45.1.26.11.1.3 | ColumndnsNameServerInetStatus | read-create | current | Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.28 | NodepoeMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.28.5 | TablepethPseMainExtTable | not-accessible | current | A table of objects that display and control attributes of the main power source in a PSE device. Ethernet switches are one example of boxes that would support … |
| 1.3.6.1.4.1.52642.2.1.45.1.28.5.1 | RowpethPseMainExtEntry | not-accessible | current | A set of objects that display and control the Main power of a PSE. |
| 1.3.6.1.4.1.52642.2.1.45.1.28.5.1.1 | ColumnpethPseMainExtDllPowerType | read-only | current | Indicates whether the local system is a PSE or a PD and whether it is Type 1 or Type 2. |
| 1.3.6.1.4.1.52642.2.1.45.1.28.5.1.2 | ColumnpethPseMainExtDllPowerSource | read-only | current | The power sources of the local system. |
| 1.3.6.1.4.1.52642.2.1.45.1.28.6 | TablepethPsePortExtTable | not-accessible | current | A table of objects that display and control the power characteristics of power Ethernet ports on a Power Source Entity (PSE) device. This group will be impleme… |
| 1.3.6.1.4.1.52642.2.1.45.1.28.6.1 | RowpethPsePortExtEntry | not-accessible | current | A set of objects that display and control the power characteristics of a power Ethernet PSE port. |
| 1.3.6.1.4.1.52642.2.1.45.1.28.6.1.4 | ColumnpethPsePortExtMirroredDllPdRequestedPowerValue | read-only | current | Returns the PD requested power value received from the remote system. The definition and encoding of PD requested power value is the same as described in pethP… |
| 1.3.6.1.4.1.52642.2.1.45.1.28.6.1.6 | ColumnpethPsePortExtDllPseAllocatedPowerValue | read-only | current | Returns the PSE allocated power value that the local system has currently allocated to the remote system. The PSE allocated power value is the maximum input av… |
| 1.3.6.1.4.1.52642.2.1.45.1.28.6.1.11 | ColumnpethPsePortTimeRange | read-write | current | The name of the time range entry bound to the port. This object should be equal to one of the timeRangeName objects in timeRangeTable. The object works when pe… |
| 1.3.6.1.4.1.52642.2.1.45.1.28.6.1.12 | ColumnpethPsePortTimeRangeStatus | read-only | current | If no time range entry is bound to the port, value of this object is none(0). If PoE time range of the port is active, value of this object is active(1). If Po… |
| 1.3.6.1.4.1.52642.2.1.45.1.28.6.1.13 | ColumnpethPsePortExtMaximumPowerValue | read-write | current | Returns the user-configurable maximum power value that the local system has currently allocated to the remote system. The unit of this variable is milliwatts. |
| 1.3.6.1.4.1.52642.2.1.45.1.28.6.1.14 | ColumnpethPsePortExtUsedPowerValue | read-only | current | Returns the currently used power value that the local system is delivering to the remote system. The unit of this variable is milliwatts. |
| 1.3.6.1.4.1.52642.2.1.45.1.33 | NodestormMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.33.1 | NodemcastStormMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.33.1.1 | TablemcastStormTable | not-accessible | current | Table to manage the control of multicast storms for ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.1.1.1 | RowmcastStormEntry | not-accessible | current | The conceptual row of multiStormTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.1.1.1.1 | ColumnmcastStormIfIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.52642.2.1.45.1.33.1.1.1.2 | ColumnmcastStormStatus | read-write | current | Whether multicast storm protection is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.1.1.1.4 | ColumnmcastStormPktRate | read-write | current | Multicast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. The range is 500 to 262143. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.3 | NodebcastStormMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.33.3.1 | TablebcastStormTable | not-accessible | current | Table to manage the control of broadcast storms for ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.3.1.1 | RowbcastStormEntry | not-accessible | current | The conceptual row of bcastStormTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.3.1.1.1 | ColumnbcastStormIfIndex | not-accessible | current | The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.52642.2.1.45.1.33.3.1.1.2 | ColumnbcastStormStatus | read-write | current | Whether broadcast storm protection is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.3.1.1.4 | ColumnbcastStormPktRate | read-write | current | Broadcast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port. The range is 500 to 262143. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.4 | NodeunknownUcastStormMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.33.4.1 | TableunknownUcastStormTable | not-accessible | current | Table to manage the unknown unicast storm control. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.4.1.1 | RowunknownUcastStormEntry | not-accessible | current | The conceptual row of unknownUcastStormTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.4.1.1.1 | ColumnunknownUcastStormIfIndex | not-accessible | current | The port or trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same valu… |
| 1.3.6.1.4.1.52642.2.1.45.1.33.4.1.1.2 | ColumnunknownUcastStormStatus | read-write | current | The parameter indicates that the unknown unicast storm protection is enabled/disabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.4.1.1.4 | ColumnunknownUcastStormPktRate | read-write | current | The parameter indicates the packet rate(packet per second) of the storm protection. The range is 500 to 262143. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5 | NodeatcMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.1 | ScalaratcBcastStormTcApplyTime | read-write | current | The parameter indicates the timing when the ATC (Auto Traffic Control) is activated after the broadcast traffic being detected as the storm. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.2 | ScalaratcBcastStormTcReleaseTime | read-write | current | The parameter indicates the timing when the ATC is released after the broadcast traffic being detected as no storm. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3 | TableatcBcastStormTable | not-accessible | current | The table contains the Auto Traffic Control configuration and the status for broadcast traffic. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3.1 | RowatcBcastStormEntry | not-accessible | current | The conceptual row of the table. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3.1.1 | ColumnatcBcastStormIfIndex | accessible-for-notify | current | The specified port on which the ATC is applied. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3.1.2 | ColumnatcBcastStormEnable | read-write | current | The parameter indicates whether the ATC of the broadcast traffic is applied. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3.1.3 | ColumnatcBcastStormAutoRelease | read-write | current | The parameter indicates whether the Auto-Release feature of ATC is applied. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3.1.4 | ColumnatcBcastStormSampleType | read-write | current | The parameter indicates the unit of traffic rate and threshold. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3.1.5 | ColumnatcBcastStormCurrentTrafficRate | read-only | current | The parameter indicates the current broadcast traffic rate. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3.1.6 | ColumnatcBcastStormAlarmFireThreshold | read-write | current | The parameter indicates that if the current broadcast traffic rate exceeds the specified threshold, it will be treated as the storm. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3.1.7 | ColumnatcBcastStormAlarmClearThreshold | read-write | current | The parameter indicates that if the current broadcast traffic falls below the specified threshold it will be treated as the normal traffic. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3.1.8 | ColumnatcBcastStormTcAction | read-write | current | The parameter indicates the protecting action which ATC will applied to the specified port. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3.1.9 | ColumnatcBcastStormAlarmFireTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the broadcast storm has been detected. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3.1.10 | ColumnatcBcastStormAlarmClearTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the broadcast storm has been detected as the normal traffic. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3.1.11 | ColumnatcBcastStormTcApplyTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the ATC is activated. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.3.1.12 | ColumnatcBcastStormTcReleaseTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the ATC is released. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.4 | ScalaratcMcastStormTcApplyTime | read-write | current | The parameter indicates the timing when the ATC (Auto Traffic Control) is activated after the broadcast traffic being detected as the storm. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.5 | ScalaratcMcastStormTcReleaseTime | read-write | current | The parameter indicates the timing when the ATC is released after the broadcast traffic being detected as no storm. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6 | TableatcMcastStormTable | not-accessible | current | The table contains the Auto Traffic Control configuration and the status for mulicast traffic. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6.1 | RowatcMcastStormEntry | not-accessible | current | The conceptual row of the table. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6.1.1 | ColumnatcMcastStormIfIndex | accessible-for-notify | current | The specified port on which the ATC is applied. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6.1.2 | ColumnatcMcastStormEnable | read-write | current | The parameter indicates whether the ATC of the mulicast traffic is applied. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6.1.3 | ColumnatcMcastStormAutoRelease | read-write | current | The parameter indicates whether the Auto-Release feature of ATC is applied. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6.1.4 | ColumnatcMcastStormSampleType | read-write | current | The parameter indicates the unit of traffic rate and threshold. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6.1.5 | ColumnatcMcastStormCurrentTrafficRate | read-only | current | The parameter indicates the current mulicast traffic rate. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6.1.6 | ColumnatcMcastStormAlarmFireThreshold | read-write | current | The parameter indicates that if the current mulicast traffic rate exceeds the specified threshold, it will be treated as the storm. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6.1.7 | ColumnatcMcastStormAlarmClearThreshold | read-write | current | The parameter indicates that if the current mulicast traffic falls below the specified threshold it will be treated as the normal traffic. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6.1.8 | ColumnatcMcastStormTcAction | read-write | current | The parameter indicates the protecting action which ATC will applied to the specified port. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6.1.9 | ColumnatcMcastStormAlarmFireTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the mulicast storm has been detected. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6.1.10 | ColumnatcMcastStormAlarmClearTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the mulicast storm has been detected as the normal traffic. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6.1.11 | ColumnatcMcastStormTcApplyTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the ATC is activated. |
| 1.3.6.1.4.1.52642.2.1.45.1.33.5.6.1.12 | ColumnatcMcastStormTcReleaseTrapStatus | read-write | current | The parameter indicates whether the trap has to be sent when the ATC is released. |
| 1.3.6.1.4.1.52642.2.1.45.1.39 | NodesysResourceMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.39.2 | NodecpuStatus | |||
| 1.3.6.1.4.1.52642.2.1.45.1.39.2.1 | ScalarcpuCurrentUti | read-only | current | The current CPU utilization in percent in the past 5 seconds. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.2.2 | ScalarcpuStatMaxUti | read-only | current | The maximum CPU utilization in percent in the past 60 seconds. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.2.3 | ScalarcpuStatAvgUti | read-only | current | The average CPU utilization in percent in the past 60 seconds. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.2.4 | ScalarcpuPeakTime | read-only | current | The time when the CPU utilization reaches cpuUtiRisingThreshold in the format of 'Mmm _d hh:mm:ss yyyy' as defined in sysCurrentTime of this MIB. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.2.5 | ScalarcpuPeakDuration | read-only | current | The duration from the CPU utilization reaches cpuUtiRisingThreshold to reaches cpuUtiFallingThreshold, in seconds. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.2.6 | ScalarcpuUtiRisingThreshold | read-write | current | The rising threshold of the cpu utilization. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.2.7 | ScalarcpuUtiFallingThreshold | read-write | current | The falling threshold of the cpu utilization. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.3 | NodememoryStatus | |||
| 1.3.6.1.4.1.52642.2.1.45.1.39.3.1 | ScalarmemoryTotal | read-only | current | The total amount of the memory in kilobytes. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.3.2 | ScalarmemoryAllocated | read-only | current | The amount of the memory allocated in kilobytes. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.3.3 | ScalarmemoryFreed | read-only | current | The amount of the free memory in kilobytes. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.3.4 | ScalarmemoryFreedInPercent | read-only | current | the memory freed in proportion to the total memory. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.3.5 | ScalarmemoryUtiRisingThreshold | read-write | current | The rising threshold of the memory utilization. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.3.6 | ScalarmemoryUtiFallingThreshold | read-write | current | The falling threshold of the memory utilization. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.4 | TabletaskCpuTable | not-accessible | current | Table of descriptive and status information describing the CPU utilization of each task. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.4.1 | RowtaskCpuEntry | not-accessible | current | An entry in the table, describing the CPU utilization of one task. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.4.1.1 | ColumntaskCpuName | not-accessible | current | The name of the task. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.4.1.2 | ColumntaskCpuCurrentUti | read-only | current | The current CPU utilization in hundredths of a percent in the past 5 seconds. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.4.1.3 | ColumntaskCpuStatMaxUti | read-only | current | The maximum CPU utilization in hundredths of a percent in the past 60 seconds. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.4.1.4 | ColumntaskCpuStatAvgUti | read-only | current | The average CPU utilization in hundredths of a percent in the past 60 seconds. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.5 | NodecpuGuard | |||
| 1.3.6.1.4.1.52642.2.1.45.1.39.5.1 | ScalarcpuGuardStatus | read-write | current | The CPU guard status. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.5.2 | ScalarcpuGuardHighWatermark | read-write | current | The CPU guard high-watermark. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.5.3 | ScalarcpuGuardLowWatermark | read-write | current | The CPU guard low-watermark. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.5.4 | ScalarcpuGuardMaxThreshold | read-write | current | The CPU guard maximum threshold. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.5.5 | ScalarcpuGuardMinThreshold | read-write | current | The CPU guard minimum threshold. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.5.6 | ScalarcpuGuardTrapStatus | read-write | current | The CPU guard trap status. |
| 1.3.6.1.4.1.52642.2.1.45.1.39.5.7 | ScalarcpuGuardCurrentThreshold | read-only | current | The current CPU guard threshold. |
| 1.3.6.1.4.1.52642.2.1.45.1.44 | NodemvrMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.44.18 | ScalarmvrForwardingPriority | read-write | current | Configure MVR multicast stream forwarding priority. If value is 65535, it means the priority is disabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.20 | TablemvrDomainTable | not-accessible | current | The table for configuring the MVR port. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.20.1 | RowmvrDomainEntry | not-accessible | current | The entry for configuring the MVR Domain. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.20.1.1 | ColumnmvrDomainId | not-accessible | current | Speicfies which MVR domain to configure. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.20.1.2 | ColumnmvrDomainStatus | read-write | current | Parameter to enable or disable MVR(Multicast VLAN Registration) on the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.20.1.3 | ColumnmvrDomainRunningStatus | read-only | current | Describes the running status of MVR (Multicast VLAN Registration) to the switch. A value of active(1) indicates that all necessary conditions in the MVR enviro… |
| 1.3.6.1.4.1.52642.2.1.45.1.44.20.1.4 | ColumnmvrDomainVlanId | read-write | current | To set VLAN for MVR.The VLAN identified by a particular value of this index is the same VLAN as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-… |
| 1.3.6.1.4.1.52642.2.1.45.1.44.20.1.5 | ColumnmvrDomainUpstreamSourceIp | read-write | current | Set the source IP address which MVR will carry in IP header when send IGMP packet to upstream router through MVR source port. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.20.1.6 | ColumnmvrDomainClearDynamicGroups | read-write | current | Clear dynamic learned groups |
| 1.3.6.1.4.1.52642.2.1.45.1.44.21 | TablemvrDomainPortTable | not-accessible | current | The table for configuring the MVR port. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.21.1 | RowmvrDomainPortEntry | not-accessible | current | The entry for configuring the MVR port. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.21.1.1 | ColumnmvrPortDomainId | not-accessible | current | Speicfies which MVR domain to configure. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.21.1.2 | ColumnmvrDomainIfIndex | not-accessible | current | The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIn… |
| 1.3.6.1.4.1.52642.2.1.45.1.44.21.1.3 | ColumnmvrDomainPortType | read-write | current | For configuring the MVR port type. To disable the MVR port type, use the none(0). |
| 1.3.6.1.4.1.52642.2.1.45.1.44.21.1.4 | ColumnmvrDomainPortImmediateLeave | read-write | current | To enable immediate leave on MVR port. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.21.1.5 | ColumnmvrDomainPortActive | read-only | current | To indicate if the port is associated with the MVR group. If the port is the MVR receiver port or the MVR source port in MVR vlan, the status is active(1); oth… |
| 1.3.6.1.4.1.52642.2.1.45.1.44.22 | NodemvrProfileTable | |||
| 1.3.6.1.4.1.52642.2.1.45.1.44.22.1 | TablemvrProfileCtlTable | not-accessible | current | The entry for configuring the MVR profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.22.1.1 | RowmvrProfileCtlEntry | not-accessible | current | The entry for configuring the MVR profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.22.1.1.1 | ColumnmvrProfileCtlId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.52642.2.1.45.1.44.22.1.1.2 | ColumnmvrProfileName | read-write | current | MVR Profile name which identify a group range. NOTE: All mvrProfileCtlEntry use the same buffer to temply store the mvrProfileName before mvrProfileCtlAction r… |
| 1.3.6.1.4.1.52642.2.1.45.1.44.22.1.1.5 | ColumnmvrProfileCtlAction | read-write | current | Set this object to create(2) to create profile. Set this object to destory(3) to delete profile. When the action is complete, this object becomes noAction(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.44.22.2 | TablemvrProfileGroupCtlTable | not-accessible | current | The entry for configuring the MVR group ranges for MVR profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.22.2.1 | RowmvrProfileGroupCtlEntry | not-accessible | current | The entry for configuring the group ranges on MVR profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.22.2.1.1 | ColumnmvrProfileGropuCtlProfileId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.52642.2.1.45.1.44.22.2.1.2 | ColumnmvrProfileGroupCtlId | not-accessible | current | Profile ID to index which group range in MVR profile |
| 1.3.6.1.4.1.52642.2.1.45.1.44.22.2.1.3 | ColumnmvrProfileGroupStartIPAddress | read-write | current | MVR Profile range start IP address. NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileStartIPAddress before mvrProfileGroupCt… |
| 1.3.6.1.4.1.52642.2.1.45.1.44.22.2.1.4 | ColumnmvrProfileGroupEndIPAddress | read-write | current | MVR Profile range end IP address. NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileEndIPAddress before mvrProfileGroupCtlAct… |
| 1.3.6.1.4.1.52642.2.1.45.1.44.22.2.1.5 | ColumnmvrProfileGroupCtlAction | read-write | current | Set this object to create(2) to create group range. Set this object to destory(3) to delete group range. When the action is complete, this object becomes noAct… |
| 1.3.6.1.4.1.52642.2.1.45.1.44.23 | TablemvrDomainAssociatedProfileTable | not-accessible | current | Configure MVR domain associate which MVR profile |
| 1.3.6.1.4.1.52642.2.1.45.1.44.23.1 | RowmvrDomainAssociatedProfileEntry | not-accessible | current | The entry for configuring MVR domain associate MVR profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.23.1.1 | ColumnmvrProfileDomainId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.52642.2.1.45.1.44.23.1.2 | ColumnmvrProfileId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.52642.2.1.45.1.44.23.1.3 | ColumnmvrProfileAction | read-write | current | Set this object to create(1) to associate profile. Set this object to destory(2) to deassociate profile. When the action is complete, this object becomes noAct… |
| 1.3.6.1.4.1.52642.2.1.45.1.44.24 | TablemvrDomainGroupStaticTable | not-accessible | current | The table for configuring the static members of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.24.1 | RowmvrDomainGroupStaticEntry | not-accessible | current | The entry for configuring the static members of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.24.1.1 | ColumnmvrGroupStaticDomainId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.52642.2.1.45.1.44.24.1.2 | ColumnmvrDomainGroupStaticAddress | not-accessible | current | The multicast address of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.24.1.3 | ColumnmvrDomainGroupStaticReceiverVlan | not-accessible | current | The receiver vlan of this MVR group |
| 1.3.6.1.4.1.52642.2.1.45.1.44.24.1.4 | ColumnmvrDomainGroupStaticPorts | read-write | current | The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.25 | TablemvrDomainGroupCurrentTable | not-accessible | current | The table for the current members of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.25.1 | RowmvrDomainGroupCurrentEntry | not-accessible | current | The entry for the current members of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.25.1.1 | ColumnmvrGroupCurrenDomainId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.52642.2.1.45.1.44.25.1.2 | ColumnmvrDomainGroupCurrentAddress | not-accessible | current | The multicast address of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.25.1.3 | ColumnmvrDomainGroupCurrentReceiverVlan | not-accessible | current | This object indicates the receiver VLAN of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.25.1.4 | ColumnmvrDomainGroupCurrentPorts | read-only | current | The complete set of ports currently associated with this MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.27 | ScalarmvrProxySwitching | read-write | current | Parameter to enable or disable MVR(Multicast VLAN Registration) proxy switching ability on the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.28 | ScalarmvrRobustnessValue | read-write | current | Paremete to set IGMP robustness value. This value apply to proxy-switching for how many IGMP report/leave will be send out from source port, and how many g-s q… |
| 1.3.6.1.4.1.52642.2.1.45.1.44.29 | ScalarmvrProxyQueryInterval | read-write | current | Set the query interval that active receiver port will use to send out general query |
| 1.3.6.1.4.1.52642.2.1.45.1.44.30 | ScalarmvrSourcePortmode | read-write | current | Paremete to set MVR Source Port forward mode. When set dynamic, MVR source port won't forward multicast streams received from other source port. When set forwa… |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32 | TablemvrPortStatisticsTable | not-accessible | current | Table of service per port. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1 | RowmvrPortStatisticsEntry | not-accessible | current | Entry of service per port. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.1 | ColumnmvrPortStatisticsDomainId | not-accessible | current | MVR domain ID. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.2 | ColumnmvrPortStatisticsPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the mvrPortTable. The interface identified by a particular value of this index is the same interf… |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.3 | ColumnmvrPortStatisticsNumGroups | read-only | current | Current learned groups |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.4 | ColumnmvrPortStatisticsNumJoinSend | read-only | current | Number of join send |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.5 | ColumnmvrPortStatisticsNumJoins | read-only | current | Number of join recieved |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.6 | ColumnmvrPortStatisticsNumJoinSuccess | read-only | current | Number of join group success |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.7 | ColumnmvrPortStatisticsNumLeavesSend | read-only | current | Number of leave send |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.8 | ColumnmvrPortStatisticsNumLeaves | read-only | current | Number of leave received |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.9 | ColumnmvrPortStatisticsNumGeneralQuerySend | read-only | current | Number of general query send. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.10 | ColumnmvrPortStatisticsNumGeneralQueryRecevied | read-only | current | Number of general query received. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.11 | ColumnmvrPortStatisticsNumSepcificQuerySend | read-only | current | Number of specific query send. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.12 | ColumnmvrPortStatisticsNumSpecificQueryReceived | read-only | current | Number of specific query received. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.13 | ColumnmvrPortStatisticsNumInvalidReport | read-only | current | Number of invalid report received. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.32.1.14 | ColumnmvrPortStatisticsClearStatistics | read-write | current | Clear this VLAN all statistics |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33 | TablemvrVlanStatisticsTable | not-accessible | current | Table of Mvr statistics VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1 | RowmvrVlanStatisticsEntry | not-accessible | current | Entry of Mvr statistics VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.1 | ColumnmvrVlanStatisticsDomainId | not-accessible | current | VLAN ID |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.2 | ColumnmvrVlanStatisticsVlanId | not-accessible | current | VLAN ID |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.3 | ColumnmvrVlanStatisticsNumGroups | read-only | current | Current learned groups |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.4 | ColumnmvrVlanStatisticsNumJoinSend | read-only | current | Number of join send. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.5 | ColumnmvrVlanStatisticsNumJoins | read-only | current | Number of join received |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.6 | ColumnmvrVlanStatisticsNumJoinSuccess | read-only | current | Number of jion success |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.7 | ColumnmvrVlanStatisticsNumLeavesSend | read-only | current | Number of leave send. |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.8 | ColumnmvrVlanStatisticsNumLeaves | read-only | current | Number of leave received |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.9 | ColumnmvrVlanStatisticsNumGeneralQuerySend | read-only | current | Number of general query send |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.10 | ColumnmvrVlanStatisticsNumGeneralQueryRecevied | read-only | current | Number of general query received |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.11 | ColumnmvrVlanStatisticsNumSepcificQuerySend | read-only | current | Number of specific query send |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.12 | ColumnmvrVlanStatisticsNumSpecificQueryReceived | read-only | current | Number of sepcific query received |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.13 | ColumnmvrVlanStatisticsNumInvalidReport | read-only | current | Number of invalid report received |
| 1.3.6.1.4.1.52642.2.1.45.1.44.33.1.14 | ColumnmvrVlanStatisticsClearStatistics | read-write | current | Clear this VLAN statistics |
| 1.3.6.1.4.1.52642.2.1.45.1.45 | NodeegressPacketBlockMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.45.1 | TableegressPacketBlockUnknownMcastTable | not-accessible | current | Table to manage the control of unknown multicast egress packet block for ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.45.1.1 | RowegressPacketBlockUnknownMcastEntry | not-accessible | current | The conceptual row of egressPacketBlockUnknownMcastTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.45.1.1.1 | ColumnegressPacketBlockUnknownMcastIfIndex | not-accessible | current | The port and the trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same… |
| 1.3.6.1.4.1.52642.2.1.45.1.45.1.1.2 | ColumnegressPacketBlockUnknownMcastStatus | read-write | current | Whether unknown multicast egress packet block protection is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.45.2 | TableegressPacketBlockUnknownUcastTable | not-accessible | current | Table to manage the control of unknown unicast egress packet block for ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.45.2.1 | RowegressPacketBlockUnknownUcastEntry | not-accessible | current | The conceptual row of egressPacketBlockUnknownUcastEntry. |
| 1.3.6.1.4.1.52642.2.1.45.1.45.2.1.1 | ColumnegressPacketBlockUnknownUcastIfIndex | not-accessible | current | The port and the trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same… |
| 1.3.6.1.4.1.52642.2.1.45.1.45.2.1.2 | ColumnegressPacketBlockUnknownUcastStatus | read-write | current | Whether unknown unicast egress packet block protection is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.45.3 | TableegressPacketBlockBcastTable | not-accessible | current | Table to manage the control of broadcast egress packet block for ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.45.3.1 | RowegressPacketBlockBcastEntry | not-accessible | current | The conceptual row of egressPacketBlockBcastTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.45.3.1.1 | ColumnegressPacketBlockBcastIfIndex | not-accessible | current | The port and the trunk interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same… |
| 1.3.6.1.4.1.52642.2.1.45.1.45.3.1.2 | ColumnegressPacketBlockBcastStatus | read-write | current | Whether broadcast egress packet block protection is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.46 | NodedhcpSnoopMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.46.1 | NodedhcpSnoopGlobal | |||
| 1.3.6.1.4.1.52642.2.1.45.1.46.1.1 | ScalardhcpSnoopEnable | read-write | current | This object indicates whether the DHCP Snooping feature is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.1.2 | ScalardhcpSnoopVerifyMacAddressEnable | read-write | current | This object indicates whether DHCP Snooping Mac address verification is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.1.3 | ScalardhcpSnoopInformationOptionEnable | read-write | current | This object indicates whether the DHCP snooping information option(option 82) feature is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.1.4 | ScalardhcpSnoopInformationOptionPolicy | read-write | current | This object indicates which reforwarding policy shall be used for DHCP snooping information option(option 82). A value of drop(1) means to drop the DHCP reques… |
| 1.3.6.1.4.1.52642.2.1.45.1.46.1.5 | ScalardhcpSnoopBindingsTableCtlAction | read-write | current | Set this to store(2) to store DHCP snooping binding entries to flash. Set this to clear(3) to clear DHCP snooping binding entries from flash. noAction(1) will … |
| 1.3.6.1.4.1.52642.2.1.45.1.46.1.6 | ScalardhcpSnoopLimitRate | read-write | current | This object indicates the limit rate that DHCP packet redirected to CPU. Set this to 0 means no rate limit for DHCP packet. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.1.7 | ScalardhcpSnoopInformationOptionRID | read-write | current | This object indicates the option that is inserted in the relay agent information remote ID sub-option. A value of tr101IP(6) means that the RID format is '<IP>… |
| 1.3.6.1.4.1.52642.2.1.45.1.46.1.8 | ScalardhcpSnoopInformationOptionRIDString | read-write | current | Inserts string in remote ID sub-option. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.1.9 | ScalardhcpSnoopInformationOptionRIDTr101VlanField | read-write | current | This object indicates whether the remote ID TR101 VLAN field is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.1.10 | ScalardhcpSnoopInformationOptionTr101BoardID | read-write | current | This object indicates the TR101 board ID. The value 255 means board ID is none, packet doesn't carry board ID information. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.2 | NodedhcpSnoopVlan | |||
| 1.3.6.1.4.1.52642.2.1.45.1.46.2.1 | TabledhcpSnoopVlanConfigTable | not-accessible | current | A table contains DHCP Snooping configurations of existing VLANs. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.2.1.1 | RowdhcpSnoopVlanConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable DHCP Snooping at each existing VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.2.1.1.1 | ColumndhcpSnoopVlanIndex | not-accessible | current | This object indicates the VLAN ID on which DHCP Snooping feature is configured. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.2.1.1.2 | ColumndhcpSnoopVlanEnable | read-write | current | This object indicates whether DHCP Snooping is enabled in this VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.3 | NodedhcpSnoopInterface | |||
| 1.3.6.1.4.1.52642.2.1.45.1.46.3.1 | TabledhcpSnoopPortConfigTable | not-accessible | current | A table provides the mechanism to configure the trust state of each port or trunk for DHCP Snooping purpose. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.3.1.1 | RowdhcpSnoopPortConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable trust state of each port or trunk for DHCP Snooping purpose. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.3.1.1.1 | ColumndhcpSnoopPortIfIndex | not-accessible | current | The ifIndex value of the port or trunk. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.3.1.1.2 | ColumndhcpSnoopPortTrustEnable | read-write | current | This object indicates whether the port or trunk is trusted for DHCP Snooping purpose. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.3.1.1.3 | ColumndhcpSnoopPortInformationOptionCID | read-write | current | This object indicates the option that is inserted in the relay agent information circuit ID sub-option. A value of tr101IP(3) means that the RID format is '<IP… |
| 1.3.6.1.4.1.52642.2.1.45.1.46.3.1.1.4 | ColumndhcpSnoopPortInformationOptionCIDString | read-write | current | Inserts string in circuit ID sub-option. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.3.1.1.5 | ColumndhcpSnoopPortInformationOptionCIDTr101VlanField | read-write | current | This object indicates whether the circuit ID TR101 VLAN field is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.4 | NodedhcpSnoopBindings | |||
| 1.3.6.1.4.1.52642.2.1.45.1.46.4.1 | TabledhcpSnoopBindingsTable | not-accessible | current | A table contains the DHCP bindings information learnt by the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.4.1.1 | RowdhcpSnoopBindingsEntry | not-accessible | current | An instance contains the Mac address, IP address type, IP address, VLAN number, interface number, leased time and status. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.4.1.1.1 | ColumndhcpSnoopBindingsVlanIndex | not-accessible | current | This object indicates the VLAN which a DHCP client host belongs to. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.4.1.1.2 | ColumndhcpSnoopBindingsMacAddress | not-accessible | current | This object indicates the MAC address of a DHCP client host. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.4.1.1.3 | ColumndhcpSnoopBindingsAddrType | read-only | current | This object indicates the type of IP address denoted in dhcpSnoopBindingsIpAddress type. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.4.1.1.4 | ColumndhcpSnoopBindingsEntryType | read-only | current | This object indicates that this binding is obtained from dynamically learning or is a static configuraion. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.4.1.1.5 | ColumndhcpSnoopBindingsIpAddress | read-only | current | This object indicates the allocated IP address of a DHCP client host. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.4.1.1.6 | ColumndhcpSnoopBindingsPortIfIndex | read-only | current | This object indicates the port or trunk where a DHCP client host connects to. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.4.1.1.7 | ColumndhcpSnoopBindingsLeaseTime | read-only | current | This object indicates the leased time of this DHCP bindings. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.5 | NodedhcpSnoopStatistics | |||
| 1.3.6.1.4.1.52642.2.1.45.1.46.5.1 | ScalardhcpSnoopTotalForwardedPkts | read-only | current | Indicates the total number of packets subjected to DHCP Snooping is forwarded. |
| 1.3.6.1.4.1.52642.2.1.45.1.46.5.3 | ScalardhcpSnoopUntrustedPortDroppedPkts | read-only | current | Indicates the number of packets subjected to DHCP Snooping is dropped because they come from untrusted interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.47 | NodeclusterMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.47.1 | ScalarclusterEnable | read-write | current | Enables or disables clustering on the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.2 | ScalarclusterCommanderEnable | read-write | current | Enables or disables the device as commander in a cluster. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.4 | ScalarclusterIpPool | read-write | current | The start internal IP address of a cluster pool. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.5 | ScalarclusterClearCandidateTable | read-write | current | Setting this object to clear(2) starts to clear the candidate table. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.6 | ScalarclusterRole | read-only | current | The current role of the device in a cluster. commander(1) : The switch is the controlling device in a cluster. candidate(2) : The switch has been discovered by… |
| 1.3.6.1.4.1.52642.2.1.45.1.47.7 | ScalarclusterMemberCount | read-only | current | The total number of members in a cluster. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.8 | ScalarclusterCandidateCount | read-only | current | The total number of candidates in a cluster. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.9 | TableclusterCandidateTable | not-accessible | current | A table listing cluster candidates. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.9.1 | RowclusterCandidateEntry | not-accessible | current | A conceptual row containing the information of the candidate. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.9.1.1 | ColumnclusterCandidateMacAddr | not-accessible | current | The MAC address of the candidate. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.9.1.3 | ColumnclusterCandidateDesc | read-only | current | The description of the candidate. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.9.1.4 | ColumnclusterCandidateRole | read-only | current | The role of the candidate. candidate(2) : The switch is discovered by the commander, but it has not been manually configured for access from the commander. act… |
| 1.3.6.1.4.1.52642.2.1.45.1.47.10 | TableclusterMemberTable | not-accessible | current | A table listing clustering members. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.10.1 | RowclusterMemberEntry | not-accessible | current | A conceptual row containing the information of the member. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.10.1.1 | ColumnclusterMemberId | not-accessible | current | The ID of the member. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.10.1.2 | ColumnclusterMemberMacAddr | read-only | current | The MAC address of the member. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.10.1.3 | ColumnclusterMemberDesc | read-only | current | The description of the member. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.10.1.4 | ColumnclusterMemberActive | read-only | current | The active status of the member. activeMember(3) : The switch is manually configured for access from the commander and it is active in the cluster. inactiveMem… |
| 1.3.6.1.4.1.52642.2.1.45.1.47.11 | NodeclusterMemberAddCtl | |||
| 1.3.6.1.4.1.52642.2.1.45.1.47.11.1 | ScalarclusterMemberAddCtlMacAddr | read-write | current | The MAC address of the device associated with clusterMemberAddCtlAction. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.11.2 | ScalarclusterMemberAddCtlId | read-write | current | The member id associated with clusterMemberAddCtlAction. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.11.5 | ScalarclusterMemberAddCtlAction | read-write | current | Adds the device to members that can be accessed from the commander. The MAC of the device is the current value of clusterMemberAddCtlMacAddr and the assigned m… |
| 1.3.6.1.4.1.52642.2.1.45.1.47.12 | NodeclusterMemberRemoveCtl | |||
| 1.3.6.1.4.1.52642.2.1.45.1.47.12.1 | ScalarclusterMemberRemoveCtlId | read-write | current | The member ID associated with clusterMemberRemoveCtlAction. |
| 1.3.6.1.4.1.52642.2.1.45.1.47.12.2 | ScalarclusterMemberRemoveCtlAction | read-write | current | Removes the device from members that can be accessed from the commander. The member ID is the current value of clusterMemberRemoveCtlId. Set this object to rem… |
| 1.3.6.1.4.1.52642.2.1.45.1.48 | NodeipSrcGuardMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.48.1 | TableipSrcGuardConfigTable | not-accessible | current | A table contains the configurations to enable or disable IP Source Guard at each port or trunk. |
| 1.3.6.1.4.1.52642.2.1.45.1.48.1.1 | RowipSrcGuardConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable IP Source Guard at each port or trunk. |
| 1.3.6.1.4.1.52642.2.1.45.1.48.1.1.1 | ColumnipSrcGuardPortIfIndex | not-accessible | current | This object idents the port or trunk which is capable of IP Source Guard feature. |
| 1.3.6.1.4.1.52642.2.1.45.1.48.1.1.2 | ColumnipSrcGuardMode | read-write | current | This object indicates whether Ip Source Guard is enabled at this interface. If the value equals 0, it means Ip Source Guard is disabled. If the value equals 1,… |
| 1.3.6.1.4.1.52642.2.1.45.1.48.3 | TableipSrcGuardAclTable | not-accessible | current | A table contains the IP Source Guard ACL binding information learned by the device or configured by the user. |
| 1.3.6.1.4.1.52642.2.1.45.1.48.3.1 | RowipSrcGuardAclEntry | not-accessible | current | An instance contains the IP address, Mac address, entry type, VLAN number, interface number and status. |
| 1.3.6.1.4.1.52642.2.1.45.1.48.3.1.1 | ColumnipSrcGuardAclBindingIpAddress | not-accessible | current | This object indicates the IP address of a ACL binding entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.48.3.1.2 | ColumnipSrcGuardAclBindingMacAddress | not-accessible | current | This object indicates the MAC address of a ACL binding entry. |
| 1.3.6.1.4.1.52642.2.1.45.1.48.3.1.3 | ColumnipSrcGuardAclBindingEntryType | not-accessible | current | This object indicates that this binding is obtained from dynamically learning or is a static configuraion. |
| 1.3.6.1.4.1.52642.2.1.45.1.48.3.1.4 | ColumnipSrcGuardAclBindingVlanIndex | read-create | current | This object indicates the VLAN which a ACL binding belongs to. |
| 1.3.6.1.4.1.52642.2.1.45.1.48.3.1.5 | ColumnipSrcGuardAclBindingPortIfIndex | read-create | current | This object indicates the port or trunk where a ACL binding associated. |
| 1.3.6.1.4.1.52642.2.1.45.1.48.3.1.6 | ColumnipSrcGuardAclBindingStatus | read-create | current | The status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.52642.2.1.45.1.52 | NodeoamMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.52.3 | TableoamPortClearStatTable | not-accessible | current | A table contains the information of clear OAM statistics at each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.52.3.1 | RowoamPortClearStatEntry | not-accessible | current | An entry contains the information of clear OAM statistics at each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.52.3.1.1 | ColumnoamPortClearStatIndex | not-accessible | current | This object shows the ifIndex value of the port excluding trunk. |
| 1.3.6.1.4.1.52642.2.1.45.1.52.3.1.2 | ColumnoamClearStatistics | read-write | current | This variable is used to clear the counters for OAM. Set this variable to clear(2) to perform the clear operation, noClear(1) will always be displayed when rea… |
| 1.3.6.1.4.1.52642.2.1.45.1.52.4 | TableoamLoopbackTable | not-accessible | current | Table for OAM remote loopback test. |
| 1.3.6.1.4.1.52642.2.1.45.1.52.4.1 | RowoamLoopbackEntry | not-accessible | current | Entry for OAM remote loopback test. |
| 1.3.6.1.4.1.52642.2.1.45.1.52.4.1.1 | ColumnoamLoopbackTestIfIndex | not-accessible | current | The ifIndex value of the port (excluding trunk and trunk members). The interface identified by a particular value of this index is the same interface as identi… |
| 1.3.6.1.4.1.52642.2.1.45.1.52.4.1.2 | ColumnoamLoopbackTestPacketNumber | read-write | current | Setting the packet number when performing loopback test. |
| 1.3.6.1.4.1.52642.2.1.45.1.52.4.1.3 | ColumnoamLoopbackTestPacketSize | read-write | current | Setting the packet size when performing loopback test. |
| 1.3.6.1.4.1.52642.2.1.45.1.52.4.1.4 | ColumnoamLoopbackTestAction | read-write | current | Setting this object to test(2) to begin the loopback test. This object will be noTest(1) when the loopback test is canceled or the loopback test has finished. |
| 1.3.6.1.4.1.52642.2.1.45.1.52.4.1.5 | ColumnoamLoopbackTestResultTx | read-only | current | A count of the the total number of loopback frames transmitted at last loopback test on this interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.52.4.1.6 | ColumnoamLoopbackTestResultRx | read-only | current | A count of the the total number of loopback frames received at last loopback test on this interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.52.4.1.7 | ColumnoamLoopbackTestResultLossRate | read-only | current | Packet loss rate of this loopback test operation in hundredths of a percent. This variable is calculated by oamLoopbackTestResultRx and oamLoopbackTestResultTx. |
| 1.3.6.1.4.1.52642.2.1.45.1.52.6 | TableoamPortClearEventLogTable | not-accessible | current | A table containing the information of clear OAM event log at each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.52.6.1 | RowoamPortClearEventLogEntry | not-accessible | current | An entry containing the information of clear OAM event log at each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.52.6.1.1 | ColumnoamPortClearEventLogIndex | not-accessible | current | The ifIndex value of the port (excluding trunk and trunk members). The interface identified by a particular value of this index is the same interface as identi… |
| 1.3.6.1.4.1.52642.2.1.45.1.52.6.1.2 | ColumnoamPortClearEventLogAction | read-write | current | This variable is used to clear the event log for OAM. Set this variable to clear(2) to perform the clear operation. noClear(1) will always be displayed when re… |
| 1.3.6.1.4.1.52642.2.1.45.1.54 | NodemldSnoopMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.54.1 | ScalarmldSnoopStatus | read-write | current | Parameter to enable or disable MLD snooping on the device. When enabled, the device will examine MLD packets and set up filters for MLD ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.2 | ScalarmldSnoopQuerier | read-write | current | Enables (disables) whether the switch acts as an MLD querier. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.3 | ScalarmldSnoopRobustness | read-write | current | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. … |
| 1.3.6.1.4.1.52642.2.1.45.1.54.4 | ScalarmldSnoopQueryInterval | read-write | current | The interval (in seconds) between MLD host-query messages sent by the switch. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.5 | ScalarmldSnoopQueryMaxResponseTime | read-write | current | The time after a query, during which a response is expected from an endstation. If a querier has sent a number of queries defined by mldSnoopRobustness, but an… |
| 1.3.6.1.4.1.52642.2.1.45.1.54.6 | ScalarmldSnoopRouterPortExpireTime | read-write | current | Sets the time (in seconds) the switch waits after the previous querier has stopped querying before the router port (which received query packets from previous … |
| 1.3.6.1.4.1.52642.2.1.45.1.54.7 | ScalarmldSnoopVersion | read-write | current | MLD version snooped |
| 1.3.6.1.4.1.52642.2.1.45.1.54.8 | ScalarmldSnoopUnknownMcastMode | read-write | current | Sets the mldSnoopUnknownMcastMode to define the flooding behavior when receive the unknown multicast traffic. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.9 | TablemldSnoopRouterCurrentTable | not-accessible | current | Table for current router ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.9.1 | RowmldSnoopRouterCurrentEntry | not-accessible | current | Entry for current router ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.9.1.1 | ColumnmldSnoopRouterCurrentVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.52642.2.1.45.1.54.9.1.2 | ColumnmldSnoopRouterCurrentPorts | read-only | current | The set of ports which are current router ports, including static router ports. Please refer to mldSnoopRouterStaticTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.10 | TablemldSnoopRouterStaticTable | not-accessible | current | Table for static router ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.10.1 | RowmldSnoopRouterStaticEntry | not-accessible | current | Entry for static router ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.10.1.1 | ColumnmldSnoopRouterStaticVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.52642.2.1.45.1.54.10.1.2 | ColumnmldSnoopRouterStaticPorts | read-create | current | The set of ports which are static router ports. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.11 | TablemldSnoopMulticastCurrentTable | not-accessible | current | Table for current multicast addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.11.1 | RowmldSnoopMulticastCurrentEntry | not-accessible | current | Entry for current multicast addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.11.1.1 | ColumnmldSnoopMulticastCurrentVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.52642.2.1.45.1.54.11.1.2 | ColumnmldSnoopMulticastCurrentIpAddress | not-accessible | current | IPv6 address of multicast group. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.11.1.3 | ColumnmldSnoopMulticastCurrentSourceIpAddress | not-accessible | current | IPv6 address of the source. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.11.1.4 | ColumnmldSnoopMulticastCurrentPorts | read-only | current | The set of ports which are members of a multicast group, including static members. Please refer to mldSnoopMulticastStaticTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.12 | TablemldSnoopMulticastStaticTable | not-accessible | current | Table for static multicast addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.12.1 | RowmldSnoopMulticastStaticEntry | not-accessible | current | Entry for static multicast addresses. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.12.1.1 | ColumnmldSnoopMulticastStaticVlanIndex | not-accessible | current | The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The e… |
| 1.3.6.1.4.1.52642.2.1.45.1.54.12.1.2 | ColumnmldSnoopMulticastStaticIpAddress | not-accessible | current | IPv6 address of multicast group. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.12.1.3 | ColumnmldSnoopMulticastStaticPorts | read-create | current | The set of ports which are members. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.13 | TablemldSnoopCurrentVlanTable | not-accessible | current | Table for configuring MLD snooping for each VLAN which exists in the device by (local or network) management, or dynamically created as a result of GVRP reques… |
| 1.3.6.1.4.1.52642.2.1.45.1.54.13.1 | RowmldSnoopCurrentVlanEntry | not-accessible | current | Entry for configuring MLD snooping. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.13.1.1 | ColumnmldSnoopCurrentVlanIndex | not-accessible | current | Same is dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.13.1.2 | ColumnmldSnoopCurrentVlanImmediateLeave | read-write | current | The parameter to enable or disable the Immediate-Leave feature on this VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16 | TablemldSnoopPortTable | not-accessible | current | Table of MLD Snooping service per port. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1 | RowmldSnoopPortEntry | not-accessible | current | Entry of MLD Snooping service per port. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1.1 | ColumnmldSnoopPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the mldsnpPortTable. The interface identified by a particular value of this index is the same int… |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1.5 | ColumnmldSnoopPortNumGroups | read-only | current | Current learned groups |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1.6 | ColumnmldSnoopPortNumJoinSend | read-only | current | Number of join send |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1.7 | ColumnmldSnoopPortNumJoins | read-only | current | Number of join recieved |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1.8 | ColumnmldSnoopPortNumJoinSuccess | read-only | current | Number of join group success |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1.9 | ColumnmldSnoopPortNumLeavesSend | read-only | current | Number of leave send |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1.10 | ColumnmldSnoopPortNumLeaves | read-only | current | Number of leave received |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1.11 | ColumnmldSnoopPortNumGeneralQuerySend | read-only | current | Number of general query send. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1.12 | ColumnmldSnoopPortNumGeneralQueryRecevied | read-only | current | Number of general query received. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1.13 | ColumnmldSnoopPortNumSepcificQuerySend | read-only | current | Number of specific query send. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1.14 | ColumnmldsnoopPortNumSpecificQueryReceived | read-only | current | Number of specific query received. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1.15 | ColumnmldSnoopPortNumInvalidReport | read-only | current | Number of invalid report received. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.16.1.16 | ColumnmldSnoopPortClearStatistics | read-write | current | Clear this VLAN all statistics |
| 1.3.6.1.4.1.52642.2.1.45.1.54.23 | ScalarmldSnoopClearDynamicGroups | read-write | current | The current number of MLD groups that the interface has joined. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24 | TablemldSnoopVlanTable | not-accessible | current | Table of MLD Snooping service per port. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1 | RowmldSnoopVlanEntry | not-accessible | current | Entry of MLD Snooping service per VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1.1 | ColumnmldSnoopVlanIndex | not-accessible | current | VLAN ID |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1.2 | ColumnmldSnoopVlanNumGroups | read-only | current | Current learned groups |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1.3 | ColumnmldSnoopVlanNumJoinSend | read-only | current | Number of join send. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1.4 | ColumnmldSnoopVlanNumJoins | read-only | current | Number of join received |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1.5 | ColumnmldSnoopVlanNumJoinSuccess | read-only | current | Number of jion success |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1.6 | ColumnmldSnoopVlanNumLeavesSend | read-only | current | Number of leave send. |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1.7 | ColumnmldSnoopVlanNumLeaves | read-only | current | Number of leave received |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1.8 | ColumnmldSnoopVlanNumGeneralQuerySend | read-only | current | Number of general query send |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1.9 | ColumnmldSnoopVlanNumGeneralQueryRecevied | read-only | current | Number of general query received |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1.10 | ColumnmldSnoopVlanNumSepcificQuerySend | read-only | current | Number of specific query send |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1.11 | ColumnmldsnoopVlanNumSpecificQueryReceived | read-only | current | Number of sepcific query received |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1.12 | ColumnmldSnoopVlanNumInvalidReport | read-only | current | Number of invalid report received |
| 1.3.6.1.4.1.52642.2.1.45.1.54.24.1.13 | ColumnmldSnoopVlanClearStatistics | read-write | current | Clear this VLAN statistics |
| 1.3.6.1.4.1.52642.2.1.45.1.56 | NodedynamicArpInspectionMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.56.1 | NodedaiGlobal | |||
| 1.3.6.1.4.1.52642.2.1.45.1.56.1.1 | ScalardaiGlobalStatus | read-write | current | Set enabled(1) to enable dynamic ARP inspection. Set disabled(2) to disable dynamic ARP inspection. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.1.2 | ScalardaiGlobalSrcMacValidation | read-write | current | Set enabled(1) to enable validation of source MAC address. Set disabled(2) to disable validation of source MAC address. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.1.3 | ScalardaiGlobalDestMacValidation | read-write | current | Set enabled(1) to enable validation of destination MAC address. Set disabled(2) to disable validation of destination MAC address. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.1.4 | ScalardaiGlobalIpAddrValidation | read-write | current | Set enabled(1) to enable validation of IP address. Set disabled(2) to disable validation of IP address. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.1.5 | ScalardaiGlobalLogNumber | read-write | current | The number of log buffers for saving log message. The value 0 means not generating system messages. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.1.6 | ScalardaiGlobalLogInterval | read-write | current | The value of the time interval for saving log messages. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.1.7 | ScalardaiGlobalAdditionalValidStatus | read-only | current | The vaule of this object is disabled(2) when the status of daiGlobalSrcMacValidation, daiGlobalDestMacValidation, and daiGlobalIpAddrValidation are disabled; e… |
| 1.3.6.1.4.1.52642.2.1.45.1.56.2 | NodedaiVlan | |||
| 1.3.6.1.4.1.52642.2.1.45.1.56.2.1 | TabledaiVlanTable | not-accessible | current | A table contains dynamic ARP inspection configurations for existing VLANs. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.2.1.1 | RowdaiVlanEntry | not-accessible | current | An instance containing the configuration of dynamic ARP inspection for each existing VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.2.1.1.1 | ColumndaiVlanIndex | not-accessible | current | This object indicates the VLAN ID on which dynamic ARP inspection is configured. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.2.1.1.2 | ColumndaiVlanStatus | read-write | current | This object indicates whether dynamic ARP inspection is enabled in this VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.2.1.1.3 | ColumndaiVlanArpAclName | read-write | current | Specifies the ARP ACL name bound to the interface. The default value of daiVlanArpAclStatus is dynamic(2). |
| 1.3.6.1.4.1.52642.2.1.45.1.56.2.1.1.4 | ColumndaiVlanArpAclStatus | read-write | current | Set to static(1) means packets not matching the ACL are dropped. Set to dynamic(2) means packets not matching the ACL are validated by the DHCP snooping bindin… |
| 1.3.6.1.4.1.52642.2.1.45.1.56.3 | NodedaiInterface | |||
| 1.3.6.1.4.1.52642.2.1.45.1.56.3.1 | TabledaiPortTable | not-accessible | current | A table containing dynamic ARP inspection configurations for port interfaces. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.3.1.1 | RowdaiPortEntry | not-accessible | current | An instance containing the configuration of dynamic ARP inspection at each port interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.3.1.1.1 | ColumndaiPortIfIndex | not-accessible | current | The ifIndex value of the port. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.3.1.1.2 | ColumndaiPortTrustStatus | read-write | current | This object indicates whether the port is trusted for dynamic ARP inspection. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.3.1.1.3 | ColumndaiPortRateLimit | read-write | current | The value of rate limit threshold per second of disposing ARP messages. Set the value 0xFFFFFFFF as no rate limit. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.4 | NodedaiLog | |||
| 1.3.6.1.4.1.52642.2.1.45.1.56.4.1 | TabledaiLogTable | not-accessible | current | A table containing dynamic ARP inspection log information. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.4.1.1 | RowdaiLogEntry | not-accessible | current | An instance containing log information of dynamic ARP inspection at each VLAN interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.4.1.1.1 | ColumndaiLogIndex | not-accessible | current | This object indicates the index of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.4.1.1.2 | ColumndaiLogVlan | read-only | current | This object indicates the VLAN ID of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.4.1.1.3 | ColumndaiLogPort | read-only | current | This object indicates the ifIndex of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.4.1.1.4 | ColumndaiLogSrcIpAddress | read-only | current | The source IP address of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.4.1.1.5 | ColumndaiLogDestIpAddress | read-only | current | The destination IP address of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.4.1.1.6 | ColumndaiLogSrcMacAddress | read-only | current | The source MAC address of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.4.1.1.7 | ColumndaiLogDestMacAddress | read-only | current | The destination MAC address of dynamic ARP inspection log information. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.5 | NodedaiStatistics | |||
| 1.3.6.1.4.1.52642.2.1.45.1.56.5.1 | ScalardaiTotalReceivedPkts | read-only | current | Indicates the total number of ARP packets received before rate limiting. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.5.2 | ScalardaiTotalDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped due to rate limt. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.5.3 | ScalardaiTotalProcessedPkts | read-only | current | Indicates the total number of ARP packets processed by ARP inspection. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.5.4 | ScalardaiTotalSrcMacDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by source MAC address validation. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.5.5 | ScalardaiTotalDestMacDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by destination MAC address validation. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.5.6 | ScalardaiTotalIpAddrDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by IP address validation. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.5.7 | ScalardaiTotalArpAclDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by ARP ACL. |
| 1.3.6.1.4.1.52642.2.1.45.1.56.5.8 | ScalardaiTotalDhcpSnoopingDroppedPkts | read-only | current | Indicates the total number of ARP packets dropped by DHCP snooping. |
| 1.3.6.1.4.1.52642.2.1.45.1.60 | NodepppoeiaMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.60.1 | NodepppoeiaGlobal | |||
| 1.3.6.1.4.1.52642.2.1.45.1.60.1.1 | ScalarpppoeiaGlobalStatus | read-write | current | Set enabled(1) to enable global status of PPPoE Intermediate Agent. Set disbaled(2) to disable global status of PPPoE Intermediate Agent. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.1.2 | ScalarpppoeiaGlobalAccessNodeId | read-write | current | Specifies access node identifier. Use empty to revert to default value. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.1.3 | ScalarpppoeiaGlobalOperAccessNodeId | read-only | current | The operational access node identifier. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.1.4 | ScalarpppoeiaGlobalGenericErrorMsg | read-write | current | Specifies generic error message. Use empty to revert to default value. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.1.5 | ScalarpppoeiaGlobalOperGenericErrorMsg | read-only | current | The operational generic error message. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.1.6 | ScalarpppoeiaGlobalClearStatisticsAction | read-write | current | This variable is used to clear the counters of all interfaces. Set clear(1) to perform the clear operation. The value noClear(2) will always be displayed when … |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2 | TablepppoeiaPortTable | not-accessible | current | Table for port configuration in PPPoE Intermediate Agent. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1 | RowpppoeiaPortEntry | not-accessible | current | Entry for port configuration in PPPoE Intermediate Agent. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1.1 | ColumnpppoeiaPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1.2 | ColumnpppoeiaPortStatus | read-write | current | This parameter is used to enable/disable PPPoE Intermediate Agent on interfaces. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1.3 | ColumnpppoeiaPortTrustStatus | read-write | current | This parameter is used to enable/disable trust mode of PPPoE Intermediate Agent on interfaces. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1.4 | ColumnpppoeiaPortVendorTagStrip | read-write | current | This parameter is used to enable/disable stripping of vendor tag status of PPPoE Intermediate Agent on interfaces. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1.5 | ColumnpppoeiaPortCircuitId | read-write | current | Specifies circuit ID of PPPoE Intermediate Agent on interfaces. Use empty to revert to default value. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1.6 | ColumnpppoeiaPortOperCircuitId | read-only | current | The operational circuit ID of PPPoE Intermediate Agent on interfaces. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1.7 | ColumnpppoeiaPortRemoteId | read-write | current | Specifies remote ID of PPPoE Intermediate Agent on interfaces. Use empty to revert to default value. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1.8 | ColumnpppoeiaPortOperRemoteId | read-only | current | The operational remote ID of PPPoE Intermediate Agent on interfaces. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1.9 | ColumnpppoeiaPortRemoteIdDelimiterEnable | read-write | current | This parameter is used to enable/disable delimiter for remote ID of PPPoE Intermediate Agent on interfaces. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1.10 | ColumnpppoeiaPortRemoteIdDelimiterAscii | read-write | current | Specifies the ASCII code of delimiter for remote ID of PPPoE Intermediate Agent on interfaces. Use 256 to revert to default value. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1.11 | ColumnpppoeiaPortCircuitIdMode | read-write | current | This object indicates the different option that is inserted to relay agent information circuit ID sub-option. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1.12 | ColumnpppoeiaPortRemoteIdMode | read-write | current | This object indicates the different option that insert to relay agent information remote ID sub-option. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.2.1.13 | ColumnpppoeiaPortOptionCarryToClient | read-write | current | This parameter is used to enable/disable carry option to client. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.3 | TablepppoeiaPortStatsTable | not-accessible | current | Table for port statistics in PPPoE Intermediate Agent. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.3.1 | RowpppoeiaPortStatsEntry | not-accessible | current | Entry for port statistics in PPPoE Intermediate Agent. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.3.1.1 | ColumnpppoeiaPortStatsIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.52642.2.1.45.1.60.3.1.2 | ColumnpppoeiaPortStatsRecvPkts | read-only | current | Indicates the total number of received packets of the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.3.1.3 | ColumnpppoeiaPortStatsRecvPadiPkts | read-only | current | Indicates the total number of received PPPoE Active Discovery Initiation packets of the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.3.1.4 | ColumnpppoeiaPortStatsRecvPadoPkts | read-only | current | Indicates the total number of received PPPoE Active Discovery Offer packets of the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.3.1.5 | ColumnpppoeiaPortStatsRecvPadrPkts | read-only | current | Indicates the total number of received PPPoE Active Discovery Request packets of the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.3.1.6 | ColumnpppoeiaPortStatsRecvPadsPkts | read-only | current | Indicates the total number of received PPPoE Active Discovery Session-confirmation packets of the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.3.1.7 | ColumnpppoeiaPortStatsRecvPadtPkts | read-only | current | Indicates the total number of received PPPoE Active Discovery Terminate packets of the interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.3.1.8 | ColumnpppoeiaPortStatsDropUntrustRespPkts | read-only | current | Indicates the total number of response packets dropped because they were untrusted. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.3.1.9 | ColumnpppoeiaPortStatsDropUntrustReqPkts | read-only | current | Indicates the total number of request packets dropped because they were untrusted. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.3.1.10 | ColumnpppoeiaPortStatsDropMalformedPkts | read-only | current | Indicates the total number of malformed packets dropped because they were untrusted. |
| 1.3.6.1.4.1.52642.2.1.45.1.60.3.1.11 | ColumnpppoeiaPortStatsClearAction | read-write | current | This variable is used to clear the counters of specified interface. Set clear(1) to perform the clear operation. The value noClear(2) will always be displayed … |
| 1.3.6.1.4.1.52642.2.1.45.1.62 | NodeerpsMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.62.1 | ScalarerpsGlobalStatus | read-write | current | Configures the ERPS function for an entire switch. Note that the ERPS domain will not take effect unless it becomes active and the global status is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2 | TableerpsDomainTable | not-accessible | current | Table for ERPS domain configuration. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1 | RowerpsDomainEntry | not-accessible | current | Entry for ERPS domain configuration. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.1 | ColumnerpsDomainIndex | not-accessible | current | An index that uniquely identifies an entry in the erpsDomainTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.2 | ColumnerpsDomainName | read-create | current | The domain name that uniquely identifies an entry in the erpsDomainTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.3 | ColumnerpsDomainMegLevel | read-create | current | Configures the maintenance entity group (MEG) level which is used to provide a communication channel for ring automatic protection switching (R-APS) informatio… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.4 | ColumnerpsDomainNodeId | read-create | current | Configures the node id whcih is a MAC address unique to the ring node. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.5 | ColumnerpsDomainWestRingPort | read-create | current | Each node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the west port for the s… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.6 | ColumnerpsDomainEastRingPort | read-create | current | Each node on the ring connects to the ring through two ports. As part of the protection switching scheme, one port can be configured as the east port for the s… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.8 | ColumnerpsDomainRplPort | read-only | current | This value displays the port for ring protection link which under normal conditions, i.e., without any failure or request, is blocked for traffic channel, to p… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.9 | ColumnerpsDomainGuardTimer | read-create | current | Configures the value of the guard timer which is used to prevent ring nodes from receiving outdated R-APS messages. The range is in 10 ms steps between 10 ms a… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.10 | ColumnerpsDomainHoldoffTimer | read-create | current | Configures the value of the holdoff timer which is used to prevent reporting error event immediately to protection switching if the provisioned holdoff timer v… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.11 | ColumnerpsDomainWtrTimer | read-create | current | Configures the value of the wait-to-restore timer which is used by the RPL owner node to prevent frequent switching operations that may be caused by intermitte… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.12 | ColumnerpsDomainControlVlanID | read-create | current | This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB. Configures one control VLAN for each ERPS domain. The control VLAN is used only to send and receive ERPS… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.13 | ColumnerpsDomainNodeState | read-only | current | |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.14 | ColumnerpsDomainWestRingPortState | read-only | current | This value displays the west ring port's current state. It displays one of the following states (1) unknown (The port's current state will stay in unknown stat… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.15 | ColumnerpsDomainEastRingPortState | read-only | current | This value displays the east ring port's current state. It displays one of the following states (1) unknown (The port's current state will stay in unknown stat… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.16 | ColumnerpsDomainRowStatus | read-create | current | The status of this conceptual row entry. This object is used to manage the creation and deletion of conceptual rows. The status column has six defined values: … |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.17 | ColumnerpsDomainMajorDomainIndex | read-create | current | An index that uniquely identifies an entry in the erpsDomainTable. A value of 0 means this domain has no major domain. Notes: This objest can not be configured… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.18 | ColumnerpsDomainPropagateTC | read-create | current | Set to enabled(1) to transmit topology change signal to the major domain. It will not take effect, if erpsDomainMajorDomainIndex has a value of 0. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.20 | ColumnerpsDomainWestMepId | read-create | current | Configures a CFM Down MEP on west ring port. A down MEP can be uniquely select by given a MEPID, domain's MEG level, and domain's control VLAN ID. A value of 0… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.21 | ColumnerpsDomainEastMepId | read-create | current | Configures a CFM Down MEP on east ring port. A down MEP can be uniquely select by given a MEPID, domain's MEG level, and domain's control VLAN ID. A value of 0… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.22 | ColumnerpsDomainNonErpsDevProtect | read-create | current | Set to enabled(1) to use non-standard protection mechanism for network containing non-ERPS devices. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.23 | ColumnerpsDomainNodeType | read-create | current | Set to none(1) to make this node act as a normal node. Set to owner(2) to make this node act as an RPL owner. Set to neighbor(3) to make this node act as an RP… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.24 | ColumnerpsDomainNonRevertive | read-create | current | Set to enabled(1) to enable non-revertive mode operation. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.25 | ColumnerpsDomainRapsDefMac | read-create | current | Set to enabled(1) to use R-APS default MAC. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.26 | ColumnerpsDomainRapsWithoutVc | read-create | current | Set to enabled(1) to enable R-APS sub ring without virtual-channel for a sub domain. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.27 | ColumnerpsDomainVersion | read-create | current | Set to v2(2) to enable ERPS v2 operation. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.28 | ColumnerpsDomainForcedSwitch | read-create | current | Set to west(2) to perform the forced switch command on west ring port of specified domain. Set to east(3) to perform the forced switch command on east ring por… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.29 | ColumnerpsDomainManualSwitch | read-create | current | Set to west(2) to perform the manual switch command on west ring port of specified domain. Set to east(3) to perform the manual switch command on east ring por… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.30 | ColumnerpsDomainClear | read-create | current | Set to clear(1) to perform the clear command on specified domain. The value noClear(2) will always be displayed when reading. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.31 | ColumnerpsDomainStatsClearAction | read-write | current | This variable is used to clear the counters of specified domain. Set to clear(1) to perform the clear operation. The value noClear(2) will always be displayed … |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.32 | ColumnerpsDomainWtbTimer | read-only | current | Displays the value of the wait-to-block timer in ms which is used by the RPL owner node when recovering from an operator command (i.e. FS or MS). This object w… |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.33 | ColumnerpsDomainWtbExpire | read-only | current | Displays the time remaining in ms until the wait-to-block timer countdown expires. A value of 0 means no countdown is running. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.34 | ColumnerpsDomainWtrExpire | read-only | current | Displays the time remaining in seconds until the wait-to-restore timer countdown expires. A value of 0 means no countdown is running. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.35 | ColumnerpsDomainWestRingPortSf | read-only | current | |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.36 | ColumnerpsDomainEastRingPortSf | read-only | current | |
| 1.3.6.1.4.1.52642.2.1.45.1.62.2.1.37 | ColumnerpsDomainMultiRplOwnerWarn | read-only | current | |
| 1.3.6.1.4.1.52642.2.1.45.1.62.3 | ScalarerpsGlobalClearStatisticsAction | read-write | current | This variable is used to clear the counters of all ERPS domains. Set to clear(1) to perform the clear operation. The value noClear(2) will always be displayed … |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4 | TableerpsPortStatsTable | not-accessible | current | Table for port statistics in ERPS. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1 | RowerpsPortStatsEntry | not-accessible | current | Entry for port statistics in ERPS. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.1 | ColumnerpsPortStatsDomainIndex | not-accessible | current | An index that uniquely identifies an entry in the erpsDomainTable. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.2 | ColumnerpsPortStatsPortIndex | not-accessible | current | This object indicates the port in an ERPS domain. The value west(1) means the west ring port. The value east(2) means the east ring port. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.3 | ColumnerpsPortStatsLocalSfCount | read-only | current | Indicates the total number of local SF events that occurred on this ring port. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.4 | ColumnerpsPortStatsLocalClrSfCount | read-only | current | Indicates the total number of local Clear SF events that occurred on this ring port. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.5 | ColumnerpsPortStatsSentSfPkts | read-only | current | Indicates the total number of R-APS SF messages sent via this ring port (not including the forwarded ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.6 | ColumnerpsPortStatsSentNrPkts | read-only | current | Indicates the total number of R-APS NR messages sent via this ring port (not including the forwarded ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.7 | ColumnerpsPortStatsSentNrRbPkts | read-only | current | Indicates the total number of R-APS NR-RB messages sent via this ring port (not including the forwarded ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.8 | ColumnerpsPortStatsSentFsPkts | read-only | current | Indicates the total number of R-APS FS messages sent via this ring port (not including the forwarded ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.9 | ColumnerpsPortStatsSentMsPkts | read-only | current | Indicates the total number of R-APS MS messages sent via this ring port (not including the forwarded ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.10 | ColumnerpsPortStatsSentEventPkts | read-only | current | Indicates the total number of R-APS EVENT messages sent via this ring port (not including the forwarded ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.11 | ColumnerpsPortStatsSentHealthPkts | read-only | current | Indicates the total number of non-standard health-check messages sent via this ring port (not including the forwarded ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.12 | ColumnerpsPortStatsRecvSfPkts | read-only | current | Indicates the total number of R-APS SF messages received via this ring port (not including the ignored ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.13 | ColumnerpsPortStatsRecvNrPkts | read-only | current | Indicates the total number of R-APS NR messages received via this ring port (not including the ignored ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.14 | ColumnerpsPortStatsRecvNrRbPkts | read-only | current | Indicates the total number of R-APS NR-RB messages received via this ring port (not including the ignored ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.15 | ColumnerpsPortStatsRecvFsPkts | read-only | current | Indicates the total number of R-APS FS messages received via this ring port (not including the ignored ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.16 | ColumnerpsPortStatsRecvMsPkts | read-only | current | Indicates the total number of R-APS MS messages received via this ring port (not including the ignored ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.17 | ColumnerpsPortStatsRecvEventPkts | read-only | current | Indicates the total number of R-APS EVENT messages received via this ring port (not including the ignored ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.18 | ColumnerpsPortStatsRecvHealthPkts | read-only | current | Indicates the total number of non-standard health-check messages received via this ring port (not including the ignored ones). |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.19 | ColumnerpsPortStatsIgnoreSfPkts | read-only | current | Indicates the total number of R-APS SF messages ignored by this ring port because they have been timed out or for other reasons. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.20 | ColumnerpsPortStatsIgnoreNrPkts | read-only | current | Indicates the total number of R-APS NR messages ignored by this ring port because they have been timed out or for other reasons. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.21 | ColumnerpsPortStatsIgnoreNrRbPkts | read-only | current | Indicates the total number of R-APS NR-RB messages ignored by this ring port because they have been timed out or for other reasons. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.22 | ColumnerpsPortStatsIgnoreFsPkts | read-only | current | Indicates the total number of R-APS FS messages ignored by this ring port because they have been timed out or for other reasons. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.23 | ColumnerpsPortStatsIgnoreMsPkts | read-only | current | Indicates the total number of R-APS MS messages ignored by this ring port because they have been timed out or for other reasons. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.24 | ColumnerpsPortStatsIgnoreEventPkts | read-only | current | Indicates the total number of R-APS EVENT messages ignored by this ring port because they have been timed out or for other reasons. |
| 1.3.6.1.4.1.52642.2.1.45.1.62.4.1.25 | ColumnerpsPortStatsIgnoreHealthPkts | read-only | current | Indicates the total number of non-standard health-check messages ignored by this ring port because they have been timed out or for other reasons. |
| 1.3.6.1.4.1.52642.2.1.45.1.63 | NodelbdMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.63.1 | NodelbdGlobal | |||
| 1.3.6.1.4.1.52642.2.1.45.1.63.1.1 | ScalarlbdGlobalStatus | read-write | current | Set enabled(1) to enable global LBD status. Set disabled(2) to disable global LBD status. |
| 1.3.6.1.4.1.52642.2.1.45.1.63.1.2 | ScalarlbdTransmitInterval | read-write | current | The transmission interval for LBD control frames. |
| 1.3.6.1.4.1.52642.2.1.45.1.63.1.3 | ScalarlbdRecoverTime | read-write | current | The recover time used by LBD auto recovery mechanism. A value of 0 disables auto recovery. |
| 1.3.6.1.4.1.52642.2.1.45.1.63.1.5 | ScalarlbdAction | read-write | current | The protection action of LBD. |
| 1.3.6.1.4.1.52642.2.1.45.1.63.1.6 | ScalarlbdTrap | read-write | current | The kind of SNMP traps for LBD will be sent. |
| 1.3.6.1.4.1.52642.2.1.45.1.63.2 | NodelbdInterface | |||
| 1.3.6.1.4.1.52642.2.1.45.1.63.2.1 | TablelbdPortTable | not-accessible | current | A table containing LBD configurations for all interfaces. |
| 1.3.6.1.4.1.52642.2.1.45.1.63.2.1.1 | RowlbdPortEntry | not-accessible | current | An instance containing the configuration of LBD at each interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.63.2.1.1.1 | ColumnlbdPortIfIndex | not-accessible | current | The ifIndex value of the port. |
| 1.3.6.1.4.1.52642.2.1.45.1.63.2.1.1.2 | ColumnlbdPortAdminState | read-write | current | The LBD administrative port status. |
| 1.3.6.1.4.1.52642.2.1.45.1.63.2.1.1.3 | ColumnlbdPortOperState | read-only | current | The LBD operative port status. |
| 1.3.6.1.4.1.52642.2.1.45.1.63.2.1.1.4 | ColumnlbdPortLoopedVlan | read-only | current | The list of VLANs on which loopback is detected. Only when oper state is looped and mode is VLAN-based, the value is nonzero. |
| 1.3.6.1.4.1.52642.2.1.45.1.66 | Nodemvr6Mgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.66.1 | Tablemvr6DomainTable | not-accessible | current | The table for configuring the MVR port. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.1.1 | Rowmvr6DomainEntry | not-accessible | current | The entry for configuring the MVR Domain. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.1.1.1 | Columnmvr6DomainId | not-accessible | current | Speicfies which MVR domain to configure. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.1.1.2 | Columnmvr6DomainStatus | read-write | current | Parameter to enable or disable MVR(Multicast VLAN Registration) on the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.1.1.3 | Columnmvr6DomainRunningStatus | read-only | current | Describes the running status of MVR (Multicast VLAN Registration) to the switch. A value of active(1) indicates that all necessary conditions in the MVR enviro… |
| 1.3.6.1.4.1.52642.2.1.45.1.66.1.1.4 | Columnmvr6DomainVlanId | read-write | current | To set VLAN for MVR.The VLAN identified by a particular value of this index is the same VLAN as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-… |
| 1.3.6.1.4.1.52642.2.1.45.1.66.1.1.5 | Columnmvr6DomainUpstreamSourceIpv6 | read-write | current | Set the source IP address which MVR will carry in IP header when send IGMP packet to upstream router through MVR source port. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.1.1.6 | Columnmvr6DomainClearDynamicGroups | read-write | current | Clear dynamic learned groups |
| 1.3.6.1.4.1.52642.2.1.45.1.66.2 | Tablemvr6DomainPortTable | not-accessible | current | The table for configuring the MVR port. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.2.1 | Rowmvr6DomainPortEntry | not-accessible | current | The entry for configuring the MVR port. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.2.1.1 | Columnmvr6PortDomainId | not-accessible | current | Speicfies which MVR domain to configure. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.2.1.2 | Columnmvr6DomainIfIndex | not-accessible | current | The port interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIn… |
| 1.3.6.1.4.1.52642.2.1.45.1.66.2.1.3 | Columnmvr6DomainPortType | read-write | current | For configuring the MVR port type. To disable the MVR port type, use the none(0). |
| 1.3.6.1.4.1.52642.2.1.45.1.66.2.1.4 | Columnmvr6DomainPortImmediateLeave | read-write | current | To enable immediate leave on MVR port. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.2.1.5 | Columnmvr6DomainPortActive | read-only | current | To indicate if the port is associated with the MVR group. If the port is the MVR receiver port or the MVR source port in MVR vlan, the status is active(1); oth… |
| 1.3.6.1.4.1.52642.2.1.45.1.66.4 | Tablemvr6DomainAssociatedProfileTable | not-accessible | current | Configure MVR domain associate which MVR profile |
| 1.3.6.1.4.1.52642.2.1.45.1.66.4.1 | Rowmvr6DomainAssociatedProfileEntry | not-accessible | current | The entry for configuring MVR domain associate MVR profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.4.1.1 | Columnmvr6ProfileDomainId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.52642.2.1.45.1.66.4.1.2 | Columnmvr6ProfileId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.52642.2.1.45.1.66.4.1.3 | Columnmvr6ProfileAction | read-write | current | Set this object to create(1) to associate profile. Set this object to destory(2) to deassociate profile. When the action is complete, this object becomes noAct… |
| 1.3.6.1.4.1.52642.2.1.45.1.66.5 | Tablemvr6DomainGroupStaticTable | not-accessible | current | The table for configuring the static members of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.5.1 | Rowmvr6DomainGroupStaticEntry | not-accessible | current | The entry for configuring the static members of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.5.1.1 | Columnmvr6GroupStaticDomainId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.52642.2.1.45.1.66.5.1.2 | Columnmvr6DomainGroupStaticAddress | not-accessible | current | The multicast address of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.5.1.3 | Columnmvr6DomainGroupStaticReceiverVlan | not-accessible | current | The receiver vlan of this MVR group |
| 1.3.6.1.4.1.52642.2.1.45.1.66.5.1.4 | Columnmvr6DomainGroupStaticPorts | read-write | current | The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.6 | Tablemvr6DomainGroupCurrentTable | not-accessible | current | The table for the current members of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.6.1 | Rowmvr6DomainGroupCurrentEntry | not-accessible | current | The entry for the current members of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.6.1.1 | Columnmvr6GroupCurrenDomainId | not-accessible | current | Profile ID to index which MVR profile |
| 1.3.6.1.4.1.52642.2.1.45.1.66.6.1.2 | Columnmvr6DomainGroupCurrentAddress | not-accessible | current | The multicast address of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.6.1.3 | Columnmvr6DomainGroupCurrentReceiverVlan | not-accessible | current | This object indicates the receiver VLAN of the MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.6.1.4 | Columnmvr6DomainGroupCurrentPorts | read-only | current | The complete set of ports currently associated with this MVR group. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.16 | Scalarmvr6ProxySwitching | read-write | current | Parameter to enable or disable MVR(Multicast VLAN Registration) proxy switching ability on the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.17 | Scalarmvr6RobustnessValue | read-write | current | Paremete to set IGMP robustness value. This value apply to proxy-switching for how many IGMP report/leave will be send out from source port, and how many g-s q… |
| 1.3.6.1.4.1.52642.2.1.45.1.66.22 | Nodemvr6ProfileTable | |||
| 1.3.6.1.4.1.52642.2.1.45.1.66.22.1 | Tablemvr6ProfileCtlTable | not-accessible | current | The entry for configuring the MVR6 profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.22.1.1 | Rowmvr6ProfileCtlEntry | not-accessible | current | The entry for configuring the MVR6 profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.22.1.1.1 | Columnmvr6ProfileCtlId | not-accessible | current | Profile ID to index which MVR6 profile |
| 1.3.6.1.4.1.52642.2.1.45.1.66.22.1.1.2 | Columnmvr6ProfileName | read-write | current | MVR6 Profile name which identify a group range. NOTE: All mvr6ProfileCtlEntry use the same buffer to temply store the mvrProfileName before mvr6ProfileCtlActio… |
| 1.3.6.1.4.1.52642.2.1.45.1.66.22.1.1.5 | Columnmvr6ProfileCtlAction | read-write | current | Set this object to create(2) to create profile. Set this object to destory(3) to delete profile. When the action is complete, this object becomes noAction(1). |
| 1.3.6.1.4.1.52642.2.1.45.1.66.22.2 | Tablemvr6ProfileGroupCtlTable | not-accessible | current | The entry for configuring the MVR group ranges for MVR6 profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.22.2.1 | Rowmvr6ProfileGroupCtlEntry | not-accessible | current | The entry for configuring the group ranges on MVR6 profile. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.22.2.1.1 | Columnmvr6ProfileGropuCtlProfileId | not-accessible | current | Profile ID to index which MVR6 profile |
| 1.3.6.1.4.1.52642.2.1.45.1.66.22.2.1.2 | Columnmvr6ProfileGroupCtlId | not-accessible | current | Profile ID to index which group range in MVR6 profile |
| 1.3.6.1.4.1.52642.2.1.45.1.66.22.2.1.3 | Columnmvr6ProfileGroupStartIPAddress | read-write | current | MVR Profile range start IP address. NOTE: All Mvr6ProfileGroupCtlEntry use the same buffer to temply store the mvr6ProfileStartIPAddress before mvr6ProfileGrou… |
| 1.3.6.1.4.1.52642.2.1.45.1.66.22.2.1.4 | Columnmvr6ProfileGroupEndIPAddress | read-write | current | MVR6 Profile range end IP address. NOTE: All Mvr6ProfileGroupCtlEntry use the same buffer to temply store the mvr6ProfileEndIPAddress before mvr6ProfileGroupCt… |
| 1.3.6.1.4.1.52642.2.1.45.1.66.22.2.1.5 | Columnmvr6ProfileGroupCtlAction | read-write | current | Set this object to create(2) to create group range. Set this object to destory(3) to delete group range. When the action is complete, this object becomes noAct… |
| 1.3.6.1.4.1.52642.2.1.45.1.66.23 | Scalarmvr6ProxyQueryInterval | read-write | current | Set the query interval that active receiver port will use to send out general query |
| 1.3.6.1.4.1.52642.2.1.45.1.66.24 | Scalarmvr6SourcePortMode | read-write | current | Dynamic means active source port will only forward multicast stream when it has group joined. Forward means active source port will always forward MVR group ra… |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26 | Tablemvr6PortStatisticsTable | not-accessible | current | Table of Mvr6 statistics VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1 | Rowmvr6PortStatisticsEntry | not-accessible | current | Entry of Mvr6 statistics VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.1 | Columnmvr6PortStatisticsDomainId | not-accessible | current | The port and the trunk (excluding trunk members) interface of the mvr6PortTable. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.2 | Columnmvr6PortStatisticsPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the mvr6PortTable. The interface identified by a particular value of this index is the same inter… |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.3 | Columnmvr6PortStatisticsNumGroups | read-only | current | Current learned groups |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.4 | Columnmvr6PortStatisticsNumJoinSend | read-only | current | Number of join send |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.5 | Columnmvr6PortStatisticsNumJoins | read-only | current | Number of join recieved |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.6 | Columnmvr6PortStatisticsNumJoinSuccess | read-only | current | Number of join group success |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.7 | Columnmvr6PortStatisticsNumLeavesSend | read-only | current | Number of leave send |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.8 | Columnmvr6PortStatisticsNumLeaves | read-only | current | Number of leave received |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.9 | Columnmvr6PortStatisticsNumGeneralQuerySend | read-only | current | Number of general query send. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.10 | Columnmvr6PortStatisticsNumGeneralQueryRecevied | read-only | current | Number of general query received. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.11 | Columnmvr6PortStatisticsNumSepcificQuerySend | read-only | current | Number of specific query send. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.12 | Columnmvr6PortStatisticsNumSpecificQueryReceived | read-only | current | Number of specific query received. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.13 | Columnmvr6PortStatisticsNumInvalidReport | read-only | current | Number of invalid report received. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.26.1.14 | Columnmvr6PortStatisticsClearStatistics | read-write | current | Clear this VLAN all statistics |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27 | Tablemvr6VlanStatisticsTable | not-accessible | current | Table of Mvr6 statistics VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1 | Rowmvr6VlanStatisticsEntry | not-accessible | current | Entry of Mvr6 statistics VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.1 | Columnmvr6VlanStatisticsDomainId | not-accessible | current | domain ID |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.2 | Columnmvr6VlanStatisticsVlanId | not-accessible | current | VLAN ID |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.3 | Columnmvr6VlanStatisticsNumGroups | read-only | current | Current learned groups |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.4 | Columnmvr6VlanStatisticsNumJoinSend | read-only | current | Number of join send. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.5 | Columnmvr6VlanStatisticsNumJoins | read-only | current | Number of join received |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.6 | Columnmvr6VlanStatisticsNumJoinSuccess | read-only | current | Number of jion success |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.7 | Columnmvr6VlanStatisticsNumLeavesSend | read-only | current | Number of leave send. |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.8 | Columnmvr6VlanStatisticsNumLeaves | read-only | current | Number of leave received |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.9 | Columnmvr6VlanStatisticsNumGeneralQuerySend | read-only | current | Number of general query send |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.10 | Columnmvr6VlanStatisticsNumGeneralQueryRecevied | read-only | current | Number of general query received |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.11 | Columnmvr6VlanStatisticsNumSepcificQuerySend | read-only | current | Number of specific query send |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.12 | Columnmvr6VlanStatisticsNumSpecificQueryReceived | read-only | current | Number of sepcific query received |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.13 | Columnmvr6VlanStatisticsNumInvalidReport | read-only | current | Number of invalid report received |
| 1.3.6.1.4.1.52642.2.1.45.1.66.27.1.14 | Columnmvr6VlanStatisticsClearStatistics | read-write | current | Clear this VLAN statistics |
| 1.3.6.1.4.1.52642.2.1.45.1.66.28 | Scalarmvr6ForwardingPriority | read-write | current | Configure MVR multicast stream forwarding priority. If value is 65535, it means the priority is disabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.67 | Nodeipv6RaGuardMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.67.1 | Tableipv6RaGuardPortTable | not-accessible | current | Table for IPv6 RA Guard port configuration. |
| 1.3.6.1.4.1.52642.2.1.45.1.67.1.1 | Rowipv6RaGuardPortEntry | not-accessible | current | Entry for IPv6 RA Guard port configuration. |
| 1.3.6.1.4.1.52642.2.1.45.1.67.1.1.1 | Columnipv6RaGuardPortIndex | not-accessible | current | The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface… |
| 1.3.6.1.4.1.52642.2.1.45.1.67.1.1.2 | Columnipv6RaGuardPortStatus | read-write | current | A value of enabled (1) indicates that IPv6 RA Guard feature is enabled on interfaces. A value of disabled (2) indicates that the feature is disabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.69 | NodeudldMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.69.1 | ScalarudldGlobalMessageInterval | read-write | current | The message interval (in seconds) between UDLD probe messages on ports that are in advertisement phase and are determined to be bidirectional. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.2 | TableudldPortTable | not-accessible | current | Table for port configuration of UDLD. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.2.1 | RowudldPortEntry | not-accessible | current | Entry for port configuration of UDLD. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.2.1.1 | ColumnudldPortIndex | accessible-for-notify | current | The port (excluding trunk and trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as … |
| 1.3.6.1.4.1.52642.2.1.45.1.69.2.1.2 | ColumnudldPortStatus | read-write | current | This parameter is used to enable/disable UDLD on this interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.2.1.3 | ColumnudldPortAggressiveStatus | read-write | current | This parameter is used to enable/disable aggressive mode of UDLD on this interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.2.1.4 | ColumnudldPortOperState | read-only | current | The operational state of UDLD on this interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.2.1.5 | ColumnudldPortPortState | read-only | current | The port state of UDLD on this interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.2.1.6 | ColumnudldPortOperMessageInterval | read-only | current | The operational message interval (in seconds) used by UDLD on this interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.2.1.7 | ColumnudldPortOperTimeout | read-only | current | The operational timeout interval (in seconds) used by UDLD to decide the basic length of the detection phase on this interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.2.1.8 | ColumnudldPortNeighborDevCount | read-only | current | The total number of neighbor devices discovered on this interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.3 | TableudldPortNeighborDevTable | not-accessible | current | Table of neighbor devices discovered by UDLD for each interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.3.1 | RowudldPortNeighborDevEntry | not-accessible | current | A conceptual row containing the information of a neighbor device. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.3.1.1 | ColumnudldPortNeighborDevPortIndex | not-accessible | current | The port (excluding trunk and trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as … |
| 1.3.6.1.4.1.52642.2.1.45.1.69.3.1.2 | ColumnudldPortNeighborDevIndex | not-accessible | current | A 32-bit integer uniquely identifying the nieghbor device discovered by UDLD on a port interface. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.3.1.3 | ColumnudldPortNeighborDevDevID | read-only | current | The device ID of this neighbor device. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.3.1.4 | ColumnudldPortNeighborDevPortID | read-only | current | The port ID of this neighbor device. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.3.1.5 | ColumnudldPortNeighborDevDevName | read-only | current | The device name of this neighbor device. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.3.1.6 | ColumnudldPortNeighborDevNeighborState | read-only | current | The neighbor state of this neighbor device. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.3.1.7 | ColumnudldPortNeighborDevExpire | read-only | current | The amount of time remaining (in seconds) before this entry should expire. Whenever this period expires, this entry will be removed. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.3.1.8 | ColumnudldPortNeighborDevMessageInterval | read-only | current | The message interval (in seconds) of this neighbor device. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.3.1.9 | ColumnudldPortNeighborDevTimeout | read-only | current | The timeout interval (in seconds) of this neighbor device. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.4 | ScalarudldGlobalDetectionInterval | read-write | current | The detection interval (in seconds) used for UDLD detection process. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.5 | ScalarudldGlobalRecoveryInterval | read-write | current | The recovery interval (in seconds) used to recover interface shut down by UDLD automatically. |
| 1.3.6.1.4.1.52642.2.1.45.1.69.6 | ScalarudldGlobalRecovery | read-write | current | This parameter is used to enable/disable auto recovery feature. |
| 1.3.6.1.4.1.52642.2.1.45.1.71 | Nodedhcpv6SnoopMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.71.1 | Nodedhcpv6SnoopGlobal | |||
| 1.3.6.1.4.1.52642.2.1.45.1.71.1.1 | Scalardhcpv6SnoopEnable | read-write | current | This object indicates whether the DHCPv6 Snooping feature is enabled. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.1.2 | Scalardhcpv6SnoopBindingTableClearAction | read-write | current | Action for clearing dhcpv6SnoopBindingTable. When this object is set to clear(2), all dynamic entries in dhcpv6SnoopBindingTable will be cleared. When this obj… |
| 1.3.6.1.4.1.52642.2.1.45.1.71.1.3 | Scalardhcpv6SnoopStatisticsClearAction | read-write | current | Action for clearing dhcpSnoopStatistics. When this object is set to clear(2), statistics in dhcpSnoopStatistics will be cleared. When this object is read, the … |
| 1.3.6.1.4.1.52642.2.1.45.1.71.2 | Nodedhcpv6SnoopVlan | |||
| 1.3.6.1.4.1.52642.2.1.45.1.71.2.1 | Tabledhcpv6SnoopVlanConfigTable | not-accessible | current | A table contains DHCPv6 Snooping configurations of existing VLANs. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.2.1.1 | Rowdhcpv6SnoopVlanConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable DHCPv6 Snooping at each existing VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.2.1.1.1 | Columndhcpv6SnoopVlanIndex | not-accessible | current | This object indicates the VLAN ID on which DHCPv6 Snooping feature is configured. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.2.1.1.2 | Columndhcpv6SnoopVlanEnable | read-write | current | This object indicates whether DHCPv6 Snooping is enabled in this VLAN. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.3 | Nodedhcpv6SnoopInterface | |||
| 1.3.6.1.4.1.52642.2.1.45.1.71.3.1 | Tabledhcpv6SnoopPortConfigTable | not-accessible | current | A table provides the mechanism to configure the trust state of each port or trunk for DHCPv6 Snooping purpose. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.3.1.1 | Rowdhcpv6SnoopPortConfigEntry | not-accessible | current | An instance contains the configuration to enable or disable trust state of each port or trunk for DHCPv6 Snooping purpose. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.3.1.1.1 | Columndhcpv6SnoopPortIfIndex | not-accessible | current | The ifIndex value of the port or trunk. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.3.1.1.2 | Columndhcpv6SnoopPortTrustEnable | read-write | current | This object indicates whether the port or trunk is trusted for DHCP Snooping purpose. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.3.1.1.3 | Columndhcpv6SnoopPortMaxBinding | read-write | current | The maximum number of binding entries of the port or trunk |
| 1.3.6.1.4.1.52642.2.1.45.1.71.3.1.1.4 | Columndhcpv6SnoopPortCurrentBinding | read-only | current | The number of dynamic binding entrires learned on the port or trunk. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.4 | Nodedhcpv6SnoopBinding | |||
| 1.3.6.1.4.1.52642.2.1.45.1.71.4.1 | Tabledhcpv6SnoopBindingTable | not-accessible | current | A table contains the DHCPv6 binding entries information learned by the device. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.4.1.1 | Rowdhcpv6SnoopBindingEntry | not-accessible | current | An instance contains the link-layer address, ia type, ia id, IPv6 address, VLAN number, interface number, lifetime. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.4.1.1.1 | Columndhcpv6SnoopBindingLinkLayerAddress | not-accessible | current | This object indicates the link-layer address of a DHCPv6 client host. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.4.1.1.2 | Columndhcpv6SnoopBindingIaType | not-accessible | current | This object indicates the IPv6 address ia type of a DHCPv6 client host. na - Non-temporary address, ta - temporary address |
| 1.3.6.1.4.1.52642.2.1.45.1.71.4.1.1.3 | Columndhcpv6SnoopBindingIaId | not-accessible | current | This object indicates the IPv6 address ia id of a DHCPv6 client host. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.4.1.1.4 | Columndhcpv6SnoopBindingIpv6Address | not-accessible | current | This object indicates the IPv6 address of a DHCPv6 client host. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.4.1.1.5 | Columndhcpv6SnoopBindingVlanIndex | read-only | current | This object indicates the VLAN which a DHCPv6 client host belongs to. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.4.1.1.6 | Columndhcpv6SnoopBindingPortIfIndex | read-only | current | This object indicates the port or trunk where a DHCPv6 client host connects to. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.4.1.1.7 | Columndhcpv6SnoopBindingLifeTime | read-only | current | This object indicates the life time of this DHCPv6 binding. |
| 1.3.6.1.4.1.52642.2.1.45.1.71.5 | Nodedhcpv6SnoopStatistics | |||
| 1.3.6.1.4.1.52642.2.1.45.1.71.5.1 | ScalardhcpSnoopRecvClientPkts | read-only | current | Indicates the received number of client packets |
| 1.3.6.1.4.1.52642.2.1.45.1.71.5.2 | ScalardhcpSnoopSentClientPkts | read-only | current | Indicates the sent number of client packets |
| 1.3.6.1.4.1.52642.2.1.45.1.71.5.3 | ScalardhcpSnoopDroppedClientPkts | read-only | current | Indicates the dropped number of client packets |
| 1.3.6.1.4.1.52642.2.1.45.1.71.5.4 | ScalardhcpSnoopRecvServerPkts | read-only | current | Indicates the received number of server packets |
| 1.3.6.1.4.1.52642.2.1.45.1.71.5.5 | ScalardhcpSnoopSentServerPkts | read-only | current | Indicates the sent number of server packets |
| 1.3.6.1.4.1.52642.2.1.45.1.71.5.6 | ScalardhcpSnoopDroppedServerPkts | read-only | current | Indicates the dropped number of server packets |
| 1.3.6.1.4.1.52642.2.1.45.1.71.5.7 | ScalardhcpSnoopRecvRelayPkts | read-only | current | Indicates the received number of relay packets |
| 1.3.6.1.4.1.52642.2.1.45.1.71.5.8 | ScalardhcpSnoopSentRelayPkts | read-only | current | Indicates the sent number of relay packets |
| 1.3.6.1.4.1.52642.2.1.45.1.71.5.9 | ScalardhcpSnoopDroppedRelayPkts | read-only | current | Indicates the dropped number of relay packets |
| 1.3.6.1.4.1.52642.2.1.45.1.74 | Nodeip6SrcGuardMgt | |||
| 1.3.6.1.4.1.52642.2.1.45.1.74.1 | Tableip6SrcGuardConfigTable | not-accessible | current | A table contains the configurations to set IPv6 Source Guard at each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.74.1.1 | Rowip6SrcGuardConfigEntry | not-accessible | current | An instance contains the configuration to set IPv6 Source Guard at each port. |
| 1.3.6.1.4.1.52642.2.1.45.1.74.1.1.1 | Columnip6SrcGuardPortIfIndex | not-accessible | current | This object idents the port which is capable of IPv6 Source Guard feature. |
| 1.3.6.1.4.1.52642.2.1.45.1.74.1.1.2 | Columnip6SrcGuardMode | read-write | current | This object indicates whether IPv6 Source Guard is enabled at this interface. If the value equals 1, it means IPv6 Source Guard is disabled. If the value equal… |
| 1.3.6.1.4.1.52642.2.1.45.1.74.1.1.3 | Columnip6SrcGuardMaxBinding | read-write | current | This object indicates the maximum number of bindings associated with the port. |
| 1.3.6.1.4.1.52642.2.1.45.1.74.2 | Tableip6SrcGuardAddrTable | not-accessible | current | A table contains the IPv6 Source Guard bindings information learnt by the device or configured by the user. |
| 1.3.6.1.4.1.52642.2.1.45.1.74.2.1 | Rowip6SrcGuardAddrEntry | not-accessible | current | An instance contains the Mac address, binding type, IPv6 address, VLAN id, interface id, and status. |
| 1.3.6.1.4.1.52642.2.1.45.1.74.2.1.1 | Columnip6SrcGuardBindingType | not-accessible | current | This object indicates the binding type of the associated client. |
| 1.3.6.1.4.1.52642.2.1.45.1.74.2.1.2 | Columnip6SrcGuardBindingMacAddress | not-accessible | current | This object indicates the MAC address of the associated client. |
| 1.3.6.1.4.1.52642.2.1.45.1.74.2.1.3 | Columnip6SrcGuardBindingIpv6Address | not-accessible | current | This object indicates the IPv6 address of the associated client. |
| 1.3.6.1.4.1.52642.2.1.45.1.74.2.1.4 | Columnip6SrcGuardBindingVlanIndex | read-create | current | This object indicates the VLAN id of the associated client. |
| 1.3.6.1.4.1.52642.2.1.45.1.74.2.1.5 | Columnip6SrcGuardBindingPortIfIndex | read-create | current | This object indicates the port of the associated client. |
| 1.3.6.1.4.1.52642.2.1.45.1.74.2.1.6 | Columnip6SrcGuardBindingStatus | read-create | current | The status of this conceptual row entry. This object issued to manage the creation and deletion of conceptual rows. The status column has six defined values: -… |
| 1.3.6.1.4.1.52642.2.1.45.2 | NodefsNotifications | |||
| 1.3.6.1.4.1.52642.2.1.45.2.1 | NodefsTraps | |||
| 1.3.6.1.4.1.52642.2.1.45.2.1.0 | NodefsTrapsPrefix | |||
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.1 | NotificationswPowerStatusChangeTrap | current | This trap is sent when the power state changes. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.17 | NotificationswFanFailureTrap | current | This trap is sent when the fan is failure. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.18 | NotificationswFanRecoverTrap | current | This trap is sent when fan failure has recovered. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.36 | NotificationswPortSecurityTrap | current | This trap is sent when the port is being intruded. This trap will only be sent when the portSecAction is set to trap(2) or trapAndShutdown(4). | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.40 | NotificationswIpFilterRejectTrap | current | This trap is sent when an incorrect IP address is rejected by the ipfilter. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.41 | NotificationswSmtpConnFailureTrap | current | This trap is triggered if the SMTP system cannot open a connection to the mail server successfully. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.43 | NotificationpethPsePortOnOffNotification | current | This Notification indicates if a Pse Port is delivering power to the PD. This notification SHOULD be sent on every status change except in searching mode. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.44 | NotificationpethPsePortPowerMaintenanceStatusNotification | current | This Notification indicates a Port Change Status and SHOULD be sent on every status change. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.45 | NotificationpethMainPowerUsageOnNotification | current | This Notification indicates PSE Threshold usage indication is on; the power usage is above the threshold. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.46 | NotificationpethMainPowerUsageOffNotification | current | This Notification indicates that the PSE Threshold usage indication is off; the usage power is below the threshold. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.58 | NotificationswThermalRisingNotification | current | This trap is sent when the temperature is over the switchThermalActionRisingThreshold. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.59 | NotificationswThermalFallingNotification | current | This trap is sent when the temperature is below the switchThermalActionFallingThreshold. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.70 | NotificationswAtcBcastStormAlarmFireTrap | current | When the broadcast traffic is detected as the storm, this trap will be fired. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.71 | NotificationswAtcBcastStormAlarmClearTrap | current | When the broadcast storm is detected as the normal traffic, this trap will be fired. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.72 | NotificationswAtcBcastStormTcApplyTrap | current | When the ATC is activated, this trap will be fired. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.73 | NotificationswAtcBcastStormTcReleaseTrap | current | When the ATC is released, this trap will be fired. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.74 | NotificationswAtcMcastStormAlarmFireTrap | current | When the multicast traffic is detected as the storm, this trap will be fired. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.75 | NotificationswAtcMcastStormAlarmClearTrap | current | When the multicast storm is detected as the normal traffic, this trap will be fired. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.76 | NotificationswAtcMcastStormTcApplyTrap | current | When the ATC is activated, this trap will be fired. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.77 | NotificationswAtcMcastStormTcReleaseTrap | current | When the ATC is released, this trap will be fired. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.91 | NotificationstpBpduGuardPortShutdownTrap | current | This trap will be sent when an interface is shut down because of BPDU guard. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.95 | NotificationswLoopbackDetectionTrap | current | This trap will be sent when loopback BPDUs have been detected. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.96 | NotificationnetworkAccessPortLinkDetectionTrap | current | This trap is sent when a networkAccessPortLinkDetection event is triggered. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.97 | Notificationdot1agCfmMepUpTrap | current | This trap is sent when a new remote MEP is discovered. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.98 | Notificationdot1agCfmMepDownTrap | current | This trap is sent when port status or interface status TLV received from remote MEP indicates it is not up. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.99 | Notificationdot1agCfmConfigFailTrap | current | This trap is sent when a MEP receives a CCM with MPID which already exists on the same MA in this switch. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.100 | Notificationdot1agCfmLoopFindTrap | current | This trap is sent when a MEP receives its own CCMs. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.101 | Notificationdot1agCfmMepUnknownTrap | current | This trap is sent when a CCM is received from an unexpected MEP. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.102 | Notificationdot1agCfmMepMissingTrap | current | This trap is sent when the cross-check enable timer expires and no CCMs were received from an expected (configured) MEP. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.103 | Notificationdot1agCfmMaUpTrap | current | This trap is sent when all expected remote MEPs are up. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.104 | NotificationautoUpgradeTrap | current | This trap is sent when auto upgrade is executed. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.107 | NotificationswCpuUtiRisingNotification | current | This notification indicates that the CPU utilization crossed cpuUtiRisingThreshold. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.108 | NotificationswCpuUtiFallingNotification | current | This notification indicates that the CPU utilization crossed cpuUtiFallingThreshold. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.109 | NotificationswMemoryUtiRisingThresholdNotification | current | This notification indicates that the memory utilization crossed memoryUtiRisingThreshold. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.110 | NotificationswMemoryUtiFallingThresholdNotification | current | This notification indicates that the memory utilization crossed memoryUtiFallingThreshold. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.114 | NotificationdhcpRogueServerAttackTrap | current | This trap is sent when receiving a DHCP packet from a rogue server. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.138 | NotificationmacNotificationTrap | current | This trap is sent when there are changes of the dynamic MAC addresses on the switch. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.141 | NotificationlbdDetectionTrap | current | This trap is sent when a loopback condition is detected by LBD. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.142 | NotificationlbdRecoveryTrap | current | This trap is sent when a recovery is done by LBD. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.189 | NotificationsfpThresholdAlarmWarnTrap | current | This trap is sent when the sfp's A/D quantity is not within alarm/warning thresholds. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.192 | NotificationudldPortShutdownTrap | current | This trap is sent when the port is shut down by UDLD. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.199 | NotificationuserAuthenticationFailureTrap | current | This trap will be triggered if authentication is fail. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.200 | NotificationuserAuthenticationSuccessTrap | current | This trap will be triggered if authentication is successful. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.201 | NotificationloginTrap | current | This trap is sent when user login. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.202 | NotificationlogoutTrap | current | This trap is sent when user logout. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.208 | NotificationfileCopyTrap | current | This trap is sent when file copy is executed. If the copy action is triggered by system, the login user information(trapVarLoginUserName/ trapVarSessionType/tr… | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.209 | NotificationuserauthCreateUserTrap | current | This trap is sent when create user account. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.210 | NotificationuserauthDeleteUserTrap | current | This trap is sent when delete user account. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.211 | NotificationuserauthModifyUserPrivilegeTrap | current | This trap is sent when modify user privilege. | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.213 | NotificationcpuGuardControlTrap | current | This trap is sent when CPU utilization rises above the high-watermark first time or when CPU utilization rises from below the low-watermark to above the high-w… | |
| 1.3.6.1.4.1.52642.2.1.45.2.1.0.214 | NotificationcpuGuardReleaseTrap | current | This trap is sent when CPU utilization falls from above the high-watermark to below the low-watermark. | |
| 1.3.6.1.4.1.52642.2.1.45.3 | NodefsConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AreaID | IpAddress | current | An OSPF Area Identifier. |
| BigMetric | Integer32 (0..'FFFFFF'h) | current | The OSPF External Metric. |
| DesignatedRouterPriority | Integer32 (0..'FF'h) | current | The values defined for the priority of a system for becoming the designated router. |
| HelloRange | Integer32 (1..'FFFF'h) | current | The range of intervals on which hello messages are exchanged. |
| KeySegment | DisplayString(SIZE(0..128)) | current | The total length of the key is 1024 characters, it is divided into 8 parts and stored in 8 separated mib variables as below: Key1: part 1 of the key (1-128) Key2: part 2 of the key (129-256) Key3: part 3 of the key (257… |
| OspfAuthenticationType | INTEGER { none (0), simplePassword (1), md5 (2) } | current | The authentication type. |
| PositiveInteger | Integer32 (0..'7FFFFFFF'h) | current | A positive integer. Values in excess are precluded as unnecessary and prone to interoperability issues. |
| RouterID | IpAddress | current | A OSPF Router Identifier. |
| StaPathCostMode | INTEGER { short(1), long(2) } | current | The path cost mode of a spanning tree algorithm, short(1) indicates that we retrieve/configure the spanning tree path cost as a 16 bit value and long(2) indicates that we retrieve/configure the spanning tree path cost a… |
| Status | INTEGER { enabled (1), disabled (2) } | current | The status of an interface: 'enabled' indicates that it is willing to communicate with other OSPF Routers, while 'disabled' indicates that it is not. |
| UpToMaxAge | Integer32 (0..3600) | current | The values that one might find or configure for variables bounded by the maximum age of an LSA. |
| ValidStatus | INTEGER { valid(1), invalid(2) } | current | A simple status value for the object to create and destroy a table entry. This is a simplified variant of RowStatus as it supports only two values. Setting it to valid(1) creates an entry. Setting it to invalid(2) destr… |