MIB Viewer

ACE2002-MIB

1933 objects
No module-level DESCRIPTION found.
Imported Objects
ATM-MIBaal5VccEntry aal5VccVci aal5VccVpi atmVcCrossConnectEntry atmVclEntry atmVclVci atmVclVpi atmVpCrossConnectEntry atmVplVpi
ATMF-CESatmfCESConfEntry
BRIDGE-MIBdot1dBasePortEntry
DS1-MIBdsx1CurrentIndex dsx1IntervalIndex dsx1IntervalNumber dsx1LineIndex dsx1LineStatus dsx1LineStatusLastChange dsx1LoopbackStatus dsx1TotalIndex
FR-ATM-PVC-SERVICE-IWF-MIB MISSINGfrAtmIwfConnectionEntry
IANAifType-MIBIANAifType
IF-MIBifAlias ifIndex InterfaceIndex
IMA-MIBimaGroupFailureStatus imaGroupIndex imaLinkIfIndex
IPOA-MIB MISSINGipoaLisIfMappingEntry
ISDN-MIBisdnSignalingEntry
PerfHist-TC-MIBPerfCurrentCount PerfIntervalCount PerfTotalCount
Q-BRIDGE-MIBPortList VlanIndex
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-SMICounter32 Counter64 enterprises Gauge32 Integer32 IpAddress NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32
SNMPv2-TCDateAndTime DisplayString RowStatus TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.164Noderad
1.3.6.1.4.1.164.1NoderadTokenRing
1.3.6.1.4.1.164.2NoderadFddi
1.3.6.1.4.1.164.3NoderadWan
1.3.6.1.4.1.164.3.1NodewanGen
1.3.6.1.4.1.164.3.1.6NodediverseIfWanGen
1.3.6.1.4.1.164.3.1.6.1NodeethIf
1.3.6.1.4.1.164.3.1.6.1.1TableethIfTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.3.1.6.1.1.1RowethIfEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.6.1.1.1.1ColumnethIfIdxread-onlycurrentA unique index of the ethernet interface/port.
1.3.6.1.4.1.164.3.1.6.1.1.1.2ColumnethModeread-writecurrentThis object indicates the Ethernet mode of operation.
1.3.6.1.4.1.164.3.1.6.1.1.1.3ColumnethBridgingModeread-writecurrentThis object indicates the bridging mode of the Ethernet interface.
1.3.6.1.4.1.164.3.1.6.1.1.1.4ColumnethEncapsulationCRCModeread-writecurrentThis object define the encapsulation type requested for the Ethernet interface. It indicates if we transfer the Ethernet frame to the other side with or withou…
1.3.6.1.4.1.164.3.1.6.1.1.1.5ColumnethBackPressureread-writecurrentThis parameter defines whether to enable or disable Back pressure. Back Pressure is a flow control parameter.
1.3.6.1.4.1.164.3.1.6.1.1.1.6ColumnethLimit4read-writecurrentThis parameter determine the Back off algorithm mode. Every 4 following collisions the Framer will be thrown out (4 times more than usuall).
1.3.6.1.4.1.164.3.1.6.1.1.1.7ColumnethSkipInitResetread-writecurrentThis parameter defines whether read status on reset.
1.3.6.1.4.1.164.3.1.6.1.1.1.8ColumnethMulticastBlockread-writecurrentThis parameter defines whether to send multicast message to WAN from LAN or not.
1.3.6.1.4.1.164.3.1.6.1.1.1.9ColumnethBroadcastBlockread-writecurrentThis parameter defines whether to send broadcast message to WAN from LAN or not.
1.3.6.1.4.1.164.3.1.6.1.1.1.10ColumnethSpeedread-writecurrentThis parameter defines the line speed.
1.3.6.1.4.1.164.3.1.6.1.1.1.11ColumnethRip2read-writecurrentThis parameter defines whether to send RIP II message to WAN from LAN or not
1.3.6.1.4.1.164.3.1.6.1.1.1.12ColumnethPortPriorityread-writecurrentThis parameter defines if priority is to be considered for this Port.
1.3.6.1.4.1.164.3.1.6.1.1.1.13ColumnethPortMngEnableread-writecurrentThis parameter defines whether management data can pass through this Port.
1.3.6.1.4.1.164.3.1.6.1.1.1.14ColumnethFlowCtrlMacAddressread-writecurrentIn case of flow control - transmit frame with this specific MAC address to inform the other end to stop sending frames. Default: 01.80.C2.00.00.01.
1.3.6.1.4.1.164.3.1.6.1.2NodeethIfPerformance
1.3.6.1.4.1.164.3.1.6.1.2.1TableethIfCurrentTablenot-accessiblecurrentThe Ethernet Current table.
1.3.6.1.4.1.164.3.1.6.1.2.1.1RowethIfCurrentEntrynot-accessiblecurrentAn entry in the Ethernet Current table.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.1ColumnethIfCurrentIndexread-onlycurrentThe index of the Ethernet interface. It may be ifIndex.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.2ColumnethIfCurrentStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.3ColumnethIfCurrentInFramesread-onlycurrentThe counter associated with the number of received frames, encountered by the Ethernet interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.4ColumnethIfCurrentInOctetsread-onlycurrentThe counter associated with the number of received octets, encountered by the Ethernet interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.5ColumnethIfCurrentAlignmentErrorsread-onlycurrentThe counter associated with the number of received frames, which are not complete (The result of dividing the number of bits by 8 is not an Integer), encounter…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.6ColumnethIfCurrentFCSErrorsread-onlycurrentThe counter associated with the number of received frames that didn't pass the FCS test, encountered by the Ethernet interface in the current 15 minute interva…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.7ColumnethIfCurrentLengthErrorread-onlycurrentThe counter associated with the number of received frames with length error, encountered by the Ethernet interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.8ColumnethIfCurrentOutFramesread-onlycurrentThe counter associated with the number of transmitted frames, encountered by the Ethernet interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.9ColumnethIfCurrentOutOctetsread-onlycurrentThe counter associated with the number of transmitted octets, encountered by the Ethernet interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.1.2.1.1.10ColumnethIfCurrentSingleCollisionFramesread-onlycurrentThe counter associated with the number of successfully transmitted frames for which transmission was inhibited by exactly one collision, encountered by the Eth…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.11ColumnethIfCurrentMultipleCollisionFramesread-onlycurrentThe counter associated with the number of successfully transmitted frames for which transmission was inhibited by more than one collision, encountered by the E…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.12ColumnethIfCurrentDeferredTransmissionsread-onlycurrentThe counter associated with the number of transmitted frames for which the first transmission attempt was delayed due to a busy media, encountered by the Ether…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.13ColumnethIfCurrentLateCollisionsread-onlycurrentThe counter associated with the number of times that a collision was detected later than the first 64 bytes of the frame, encountered by the Ethernet interface…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.14ColumnethIfCurrentCarrierSenseErrorsread-onlycurrentThe counter associated with the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame, encountered by…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.15ColumnethIfCurrentInputCongestionDroppedread-onlycurrentThe counter associated with the number of frames dropped due to lack of buffers in ingress pool, encountered by the Ethernet interface in the current 15 minute…
1.3.6.1.4.1.164.3.1.6.1.2.1.1.16ColumnethIfCurrentOutputCongestionDroppedread-onlycurrentThe counter associated with the number of dropped frames due to a congestion, encountered by the Transmit direction to the Ethernet interface in the current 15…
1.3.6.1.4.1.164.3.1.6.1.2.2TableethIfIntervalTablenot-accessiblecurrentThe Ethernet Interval table.
1.3.6.1.4.1.164.3.1.6.1.2.2.1RowethIfIntervalEntrynot-accessiblecurrentAn entry in the Ethernet Interval table.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.1ColumnethIfIntervalIndexread-onlycurrentThe index of the Ethernet interface. It may be ifIndex.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.2ColumnethIfIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.3.1.6.1.2.2.1.3ColumnethIfIntervalStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.4ColumnethIfIntervalInFramesread-onlycurrentThe counter associated with the number of received frames, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.5ColumnethIfIntervalInOctetsread-onlycurrentThe counter associated with the number of received octets, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.6ColumnethIfIntervalAlignmentErrorsread-onlycurrentThe counter associated with the number of received frames, which are not complete (The result of dividing the number of bits by 8 is not an Integer), encounter…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.7ColumnethIfIntervalFCSErrorsread-onlycurrentThe counter associated with the number of received frames that didn't pass the FCS test, encountered by the Ethernet interface in one of the previous 96, indiv…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.8ColumnethIfIntervalLengthErrorread-onlycurrentThe counter associated with the number of received frames with length error, encountered by the Ethernet interface in one of the previous 96, individual 15 min…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.9ColumnethIfIntervalOutFramesread-onlycurrentThe counter associated with the number of transmitted frames, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.10ColumnethIfIntervalOutOctetsread-onlycurrentThe counter associated with the number of transmitted octets, encountered by the Ethernet interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.1.2.2.1.11ColumnethIfIntervalSingleCollisionFramesread-onlycurrentThe counter associated with the number of successfully transmitted frames for which transmission was inhibited by exactly one collision, encountered by the Eth…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.12ColumnethIfIntervalMultipleCollisionFramesread-onlycurrentThe counter associated with the number of successfully transmitted frames for which transmission was inhibited by more than one collision, encountered by the E…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.13ColumnethIfIntervalDeferredTransmissionsread-onlycurrentThe counter associated with the number of transmitted frames for which the first transmission attempt was delayed due to a busy media, encountered by the Ether…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.14ColumnethIfIntervalLateCollisionsread-onlycurrentThe counter associated with the number of times that a collision was detected later than the first 64 bytes of the frame, encountered by the Ethernet interface…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.15ColumnethIfIntervalCarrierSenseErrorsread-onlycurrentThe counter associated with the number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame, encountered by…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.16ColumnethIfIntervalInputCongestionDroppedread-onlycurrentThe counter associated with the number of dropped frames due to a congestion, encountered by the Receive direction to the Ethernet interface in one of the prev…
1.3.6.1.4.1.164.3.1.6.1.2.2.1.17ColumnethIfIntervalOutputCongestionDroppedread-onlycurrentThe counter associated with the number of dropped frames due to a congestion, encountered by the Transmit direction to the Ethernet interface in one of the pre…
1.3.6.1.4.1.164.3.1.6.1.2.3ScalarethPerformanceModeread-writecurrentThis object indicates whether OK or Fail statistics will be counted.
1.3.6.1.4.1.164.3.1.6.1.2.4TableethIfPerfTablenot-accessiblecurrentThe Ethernet Performance table.
1.3.6.1.4.1.164.3.1.6.1.2.4.1RowethIfPerfEntrynot-accessiblecurrentAn entry in the Ethernet Performance table.
1.3.6.1.4.1.164.3.1.6.1.2.4.1.1ColumnethIfPerfInOkFramesread-onlycurrentThe counter associated with the number of received OK frames, encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Statis…
1.3.6.1.4.1.164.3.1.6.1.2.4.1.2ColumnethIfPerfOutOkFramesread-onlycurrentThe counter associated with the number of transmitted OK frames, encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Reset Sta…
1.3.6.1.4.1.164.3.1.6.1.2.4.1.3ColumnethIfPerfTotalCollisionsread-onlycurrentThe counter associated with the total number of collisions of any type encountered by the Ethernet interface since ethPerformanceMode Set to countOK (2) or Res…
1.3.6.1.4.1.164.3.1.6.2NodesonetInterface
1.3.6.1.4.1.164.3.1.6.2.1NodeprtSonetPerfHistory
1.3.6.1.4.1.164.3.1.6.2.1.1TableprtSonetMediumTablenot-accessiblecurrentThe SONET Medium table.
1.3.6.1.4.1.164.3.1.6.2.1.1.1RowprtSonetMediumEntrynot-accessiblecurrentAn entry in the SONET Medium table. ifIndex of the lowest SONET layer of type sonet(39).
1.3.6.1.4.1.164.3.1.6.2.1.1.1.1ColumnprtSonetMediumTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the near end current error- measurement period.
1.3.6.1.4.1.164.3.1.6.2.1.1.1.2ColumnprtSonetMediumValidIntervalsread-onlycurrentThe number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 h…
1.3.6.1.4.1.164.3.1.6.2.1.2TableprtSonetSectionLineCurrentTablenot-accessiblecurrentThe SONET Section/Line Current table.
1.3.6.1.4.1.164.3.1.6.2.1.2.1RowprtSectionLineCurrentEntrynot-accessiblecurrentAn entry in the SONET Section/Line Current table. ifIndex of the section/line SONET layer of type sonet(39).
1.3.6.1.4.1.164.3.1.6.2.1.2.1.1ColumnprtSonetCurrentLOSread-onlycurrentThe counter associated with the number of LOS seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.2ColumnprtSonetCurrentLOFread-onlycurrentThe counter associated with the number of LOF seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.3ColumnprtSonetCurrentLineAISread-onlycurrentThe counter associated with the number of Line AIS seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.4ColumnprtSonetCurrentLineFERFread-onlycurrentThe counter associated with the number of Line FERF seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.5ColumnprtSonetCurrentSectionBIPread-onlycurrentThe counter associated with the number of Section BIP errors, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.6ColumnprtSonetCurrentLineBIPread-onlycurrentThe counter associated with the number of Line BIP errors, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.7ColumnprtSonetCurrentLineFEBEread-onlycurrentThe counter associated with the number of Line FEBE errors, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.8ColumnprtSonetCurrentUASread-onlycurrentThe counter associated with the number of UAS encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.9ColumnprtSonetCurrentSESread-onlycurrentThe counter associated with the number of SES encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.10ColumnprtSonetCurrentESread-onlycurrentThe number of Errored Seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.11ColumnprtSonetCurrentStatusread-onlycurrentThe statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.
1.3.6.1.4.1.164.3.1.6.2.1.2.1.12ColumnprtSonetCurrentLSVread-onlycurrentThe counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.3TableprtSonetSectionLineIntervalTablenot-accessiblecurrentThe Section/Line Interval table.
1.3.6.1.4.1.164.3.1.6.2.1.3.1RowprtSectionLineIntervalEntrynot-accessiblecurrentAn entry in the SONET Section/Line Interval table. ifIndex of the section/line SONET layer of type sonet(39).
1.3.6.1.4.1.164.3.1.6.2.1.3.1.1ColumnprtSonetLineIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.3.1.6.2.1.3.1.2ColumnprtSonetIntervalLOSread-onlycurrentThe counter associated with the number of LOS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.3ColumnprtSonetIntervalLOFread-onlycurrentThe counter associated with the number of LOF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.4ColumnprtSonetIntervalLineAISread-onlycurrentThe counter associated with the number of Line AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.5ColumnprtSonetIntervalLineFERFread-onlycurrentThe counter associated with the number of Line FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.6ColumnprtSonetIntervalSectionBIPread-onlycurrentThe counter associated with the number of Section BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.7ColumnprtSonetIntervalLineBIPread-onlycurrentThe counter associated with the number of Line BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.8ColumnprtSonetIntervalLineFEBEread-onlycurrentThe counter associated with the number of Line FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.9ColumnprtSonetIntervalUASread-onlycurrentThe counter associated with the number of UAS encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.10ColumnprtSonetIntervalSESread-onlycurrentThe counter associated with the number of SES encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.11ColumnprtSonetIntervalESread-onlycurrentThe number of Errored Seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.12ColumnprtSonetIntervalStatusread-onlycurrentThe statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.
1.3.6.1.4.1.164.3.1.6.2.1.3.1.13ColumnprtSonetIntervalLSVread-onlycurrentThe counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in one of the previous 96, individual 15 minute…
1.3.6.1.4.1.164.3.1.6.2.1.4TableprtSonetPathCurrentTablenot-accessiblecurrentThe SONET Path Current table.
1.3.6.1.4.1.164.3.1.6.2.1.4.1RowprtPathCurrentEntrynot-accessiblecurrentAn entry in the SONET Path Current table. ifIndex of the Path SONET layer of type sonetPath(50).
1.3.6.1.4.1.164.3.1.6.2.1.4.1.1ColumnprtSonetCurrentPathAISread-onlycurrentThe counter associated with the number of Path AIS seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.4.1.2ColumnprtSonetCurrentPathFERFread-onlycurrentThe counter associated with the number of Path FERF seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.4.1.3ColumnprtSonetCurrentLOPread-onlycurrentThe counter associated with the number LOP seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.4.1.4ColumnprtSonetCurrentSLMread-onlycurrentThe counter associated with the number of SLM seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.4.1.5ColumnprtSonetCurrentLOCread-onlycurrentThe counter associated with the number of LOC seconds, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.4.1.6ColumnprtSonetCurrentPathBIPread-onlycurrentThe counter associated with the number of Path BIP errors, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.4.1.7ColumnprtSonetCurrentPathFEBEread-onlycurrentThe counter associated with the number of Path FEBE errors, encountered by a SONET interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.5TableprtSonetPathIntervalTablenot-accessiblecurrentThe Path Interval table.
1.3.6.1.4.1.164.3.1.6.2.1.5.1RowprtPathIntervalEntrynot-accessiblecurrentAn entry in the SONET Path Interval table.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.1ColumnprtSonetPathIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.3.1.6.2.1.5.1.2ColumnprtSonetIntervalPathAISread-onlycurrentThe counter associated with the number of Path AIS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.3ColumnprtSonetIntervalPathFERFread-onlycurrentThe counter associated with the number of Path FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.4ColumnprtSonetIntervalLOPread-onlycurrentThe counter associated with the number of LOP seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.5ColumnprtSonetIntervalSLMread-onlycurrentThe counter associated with the number of SLM seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.6ColumnprtSonetIntervalLOCread-onlycurrentThe counter associated with the number of LOC seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.7ColumnprtSonetIntervalPathBIPread-onlycurrentThe counter associated with the number of Path BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.5.1.8ColumnprtSonetIntervalPathFEBEread-onlycurrentThe counter associated with the number of Path FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.2.1.6NodevirtualIfStatistics
1.3.6.1.4.1.164.3.1.6.2.1.6.1TablevirtualIfCurrentTablenot-accessiblecurrentThe Virtual Interface Current table.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1RowvirtualIfCurrentEntrynot-accessiblecurrentAn entry in the Virtual Interface Current table.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.1ColumnvirtualIfCurrentMinActiveVCread-onlycurrentThis object holds the minimum number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.2ColumnvirtualIfCurrentMaxActiveVCread-onlycurrentThis object holds the maximum number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.3ColumnvirtualIfCurrentRxFramesread-onlycurrentThis counter is associated with the number of frames received from STS-3/STM-1 by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.4ColumnvirtualIfCurrentTxFramesread-onlycurrentThis counter is associated with the number of frames transmitted to STS-3/STM-1 by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.5ColumnvirtualIfCurrentRxAbortFramesread-onlycurrentThe counter associated with the number of Received Aborted frames encountered by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.6ColumnvirtualIfCurrentTxAbortFramesread-onlycurrentThe counter associated with the number of Transmitted Aborted frames encountered by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.7ColumnvirtualIfCurrentMinLengthViolationread-onlycurrentThis counter is associated with the number of Rx payload Min Length Violation frames encountered by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.8ColumnvirtualIfCurrentMaxLengthViolationread-onlycurrentThis counter is associated with the number of Rx payload Max Length Violation frames encountered by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.9ColumnvirtualIfCurrentFcsErrorread-onlycurrentThe counter is associated with the number of Frame Check Sequence errors encountered by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.10ColumnvirtualIfCurrentByteDestuffingViolationread-onlycurrentThe counter associated with the number of Byte De-stuffing Violations encountered by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.11ColumnvirtualIfCurrentAdressMismatchread-onlycurrentThe counter associated with the number of Adress Mismatch encountered by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.12ColumnvirtualIfCurrentControlMismatchread-onlycurrentThe counter associated with the number of Control Mismatch encountered by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.1.1.13ColumnvirtualIfCurrentActiveVCread-onlycurrentThis object holds the number of active virtual containers (VCs) of the Virtual Concatenation Group in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.2TablevirtualIfIntervalTablenot-accessiblecurrentThe Virtual Interface Interval table.
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1RowvirtualIfIntervalEntrynot-accessiblecurrentAn entry in the Virtual Interface Interval table.
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.1ColumnvirtualIfIntervalNumbernot-accessiblecurrentA number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple…
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.2ColumnvirtualIfIntervalMinActiveVCread-onlycurrentThis object holds the minimum number of active virtual containers (VCs) of the Virtual Concatenation Group, in a particular 15-minute interval in the past 24 h…
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.3ColumnvirtualIfIntervalMaxActiveVCread-onlycurrentThis object holds the maximum number of active virtual containers (VCs) of the Virtual Concatenation Group, in a particular 15-minute interval in the past 24 h…
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.4ColumnvirtualIfIntervalRxFramesread-onlycurrentThis counter is associated with the number of frames received from STS-3/STM-1 by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.5ColumnvirtualIfIntervalTxFramesread-onlycurrentThis counter is associated with the number of frames transmitted to STS-3/STM-1 by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.6ColumnvirtualIfIntervalRxAbortFramesread-onlycurrentThis counter is associated with the number of Received Abort frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.7ColumnvirtualIfIntervalTxAbortFramesread-onlycurrentThis counter is associated with the number of Transmitted Abort frames encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hou…
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.8ColumnvirtualIfIntervalMinLengthViolationread-onlycurrentThis counter is associated with the number of Rx payload Min Length Violation frames encountered by a Virtual Interface in a particular 15-minute interval in t…
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.9ColumnvirtualIfIntervalMaxLengthViolationread-onlycurrentThis counter is associated with the number of Rx payload Max Length Violation frames encountered by a Virtual Interface in a particular 15-minute interval in t…
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.10ColumnvirtualIfIntervalFcsErrorread-onlycurrentThis counter is associated with the number of Frame Check Sequence errors encountered by a Virtual Interface in a particular 15-minute interval in the past 24 …
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.11ColumnvirtualIfIntervalByteDestuffingViolationread-onlycurrentThis counter is associated with the number of Byte De-stuffing Violations encountered by a Virtual Interface in a particular 15-minute interval in the past 24 …
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.12ColumnvirtualIfIntervalAdressMismatchread-onlycurrentThis counter is associated with the number of Address Mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.13ColumnvirtualIfIntervalControlMismatchread-onlycurrentThis counter is associated with the number of Control mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
1.3.6.1.4.1.164.3.1.6.2.1.6.2.1.14ColumnvirtualIfIntervalBelowMinThresholdread-onlycurrentThis counter is associated with the number of seconds that number of active VCs was below minimum threshold defined by vcGroupCnfgNoOfVCs, encountered by Virtu…
1.3.6.1.4.1.164.3.1.6.2.1.6.3TablevirtualIfLAPSCurrentTablenot-accessiblecurrentThe Virtual Interface LAPS Current table.
1.3.6.1.4.1.164.3.1.6.2.1.6.3.1RowvirtualIfLAPSCurrentEntrynot-accessiblecurrentAn entry in the Virtual Interface LAPS Current table.
1.3.6.1.4.1.164.3.1.6.2.1.6.3.1.1ColumnvirtualIfLAPSCurrentSapiMismatchread-onlycurrentThis counter is associated with the number of received SAPI field mismatch encountered by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.4TablevirtualIfLAPSIntervalTablenot-accessiblecurrentThe Virtual Interface LAPS table.
1.3.6.1.4.1.164.3.1.6.2.1.6.4.1RowvirtualIfLAPSIntervalEntrynot-accessiblecurrentAn entry in the Virtual Interface LAPS Interval table.
1.3.6.1.4.1.164.3.1.6.2.1.6.4.1.1ColumnvirtualIfLAPSIntervalSapiMismatchread-onlycurrentThis counter is associated with the number of received SAPI field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24…
1.3.6.1.4.1.164.3.1.6.2.1.6.5TablevirtualIfLAPFCurrentTablenot-accessiblecurrentThe Virtual Interface LAPF Current table.
1.3.6.1.4.1.164.3.1.6.2.1.6.5.1RowvirtualIfLAPFCurrentEntrynot-accessiblecurrentAn entry in the Virtual Interface LAPF Current table.
1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.1ColumnvirtualIfLAPFCurrentNlpidMismatchread-onlycurrentThis counter is associated with the number of received NLPID field mismatch encountered by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.2ColumnvirtualIfLAPFCurrentOuiMismatchread-onlycurrentThis counter is associated with the number of received OUI field mismatch encountered by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.3ColumnvirtualIfLAPFCurrentPidMismatchread-onlycurrentThis counter is associated with the number of received PID field mismatch encountered by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.4ColumnvirtualIfLAPFCurrentDlciMismatchread-onlycurrentThis counter is associated with the number of received DLCI field mismatch encountered by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.5ColumnvirtualIfLAPFCurrentMacRxFramesread-onlycurrentThis counter is associated with the number of frames received from LAN by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.5.1.6ColumnvirtualIfLAPFCurrentMacTxFramesread-onlycurrentThis counter is associated with the number of frames transmitted to LAN by a Virtual Interface in the current 15-minute interval.
1.3.6.1.4.1.164.3.1.6.2.1.6.6TablevirtualIfLAPFIntervalTablenot-accessiblecurrentThe Virtual Interface LAPF Interval table.
1.3.6.1.4.1.164.3.1.6.2.1.6.6.1RowvirtualIfLAPFIntervalEntrynot-accessiblecurrentAn entry in the Virtual Interface Interval table.
1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.1ColumnvirtualIfLAPFIntervalNlpidMismatchread-onlycurrentThis counter is associated with the number of received NLPID field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 2…
1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.2ColumnvirtualIfLAPFIntervalOuiMismatchread-onlycurrentThis counter is associated with the number of received OUI field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 …
1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.3ColumnvirtualIfLAPFIntervalPidMismatchread-onlycurrentThis counter is associated with the number of received PID field mismatch encountered by a Virtual Interface in a particular 15-minute interval in the past 24 …
1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.4ColumnvirtualIfLAPFIntervalDlciMismatchread-onlycurrentThis counter is associated with the number of received DLCI field mismatch by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.5ColumnvirtualIfLAPFIntervalMacRxFramesread-onlycurrentThis counter is associated with the number of frames received from LAN by a Virtual Interface in a particular 15-minute interval in the past 24 hours.
1.3.6.1.4.1.164.3.1.6.2.1.6.6.1.6ColumnvirtualIfLAPFIntervalMacTxFramesread-onlycurrentThis counter is associated with the number of frames transmitted to LAN encountered by a Virtual Interface in a particular 15-minute interval in the past 24 ho…
1.3.6.1.4.1.164.3.1.6.2.1.6.7TablevirtualIfGFPCurrentTablenot-accessiblecurrentThe Virtual Interface GFP Current table.
1.3.6.1.4.1.164.3.1.6.2.1.6.7.1RowvirtualIfGFPCurrentEntrynot-accessiblecurrentAn entry in the Virtual Interface GFP Current table.
1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.1ColumnvirtualIfGFPCurrentIdleFrameErrorread-onlycurrentThis counter is associated with the number of received GFP IDLE frames that are detected to be in error, encountered by a Virtual Interface in the current 15-m…
1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.2ColumnvirtualIfGFPCurrentCHecSbErrorread-onlycurrentThis counter is associated with the number of received GFP frames that are detected to have single-bit errors in the Core header (i.e. cHEC field) only, encoun…
1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.3ColumnvirtualIfGFPCurrentPtiMismatchread-onlycurrentThis counter is associated with the number of rreceived GFP frames that are detected with a mismatch on the PTI field (i.e. value of PTI is not equal to Client…
1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.4ColumnvirtualIfGFPCurrentExiMismatchread-onlycurrentThis counter is associated with the number of received GFP frames that are detected with a mismatch on the EXI field (i.e. value of EXI is not equal to NULL or…
1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.5ColumnvirtualIfGFPCurrentUpiMismatchread-onlycurrentThis counter is associated with the number of received GFP frames that are detected with a mismatch on the UPI field (i.e. value of EXI is not equal to 0000000…
1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.6ColumnvirtualIfGFPCurrentTHecSbErrorread-onlycurrentThis counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Type header (i.e. tHEC field), encoun…
1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.7ColumnvirtualIfGFPCurrentTHecMbErrorread-onlycurrentThis counter is associated with the number of received GFP frames that are detected to only have multi-bit errors in the Type header (i.e. tHEC field), encount…
1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.8ColumnvirtualIfGFPCurrentCidMismatchread-onlycurrentThis counter is associated with the number of received GFP frames that are detected to have a mismatch/unsupported value in the CID field only, encountered by …
1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.9ColumnvirtualIfGFPCurrentEHecSbErrorread-onlycurrentThis counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), e…
1.3.6.1.4.1.164.3.1.6.2.1.6.7.1.10ColumnvirtualIfGFPCurrentEHecMbErrorread-onlycurrentThis counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), e…
1.3.6.1.4.1.164.3.1.6.2.1.6.8TablevirtualIfGFPIntervalTablenot-accessiblecurrentThe Virtual Interface GFP Interval table.
1.3.6.1.4.1.164.3.1.6.2.1.6.8.1RowvirtualIfGFPIntervalEntrynot-accessiblecurrentAn entry in the Virtual Interface GFP Interval table.
1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.1ColumnvirtualIfGFPIntervalIdleFrameErrorread-onlycurrentThis counter is associated with the number of received GFP IDLE frames that are detected to be in error, encountered by a Virtual Interface in a particular 15-…
1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.2ColumnvirtualIfGFPIntervalCHecSbErrorread-onlycurrentThis counter is associated with the number of received GFP frames that are detected to have single-bit errors in the Core header (i.e. cHEC field) only, encoun…
1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.3ColumnvirtualIfGFPIntervalPtiMismatchread-onlycurrentThis counter is associated with the number of rreceived GFP frames that are detected with a mismatch on the PTI field (i.e. value of PTI is not equal to Client…
1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.4ColumnvirtualIfGFPIntervalExiMismatchread-onlycurrentThis counter is associated with the number of received GFP frames that are detected with a mismatch on the EXI field (i.e. value of EXI is not equal to NULL or…
1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.5ColumnvirtualIfGFPIntervalUpiMismatchread-onlycurrentThis counter is associated with the number of received GFP frames that are detected with a mismatch on the UPI field (i.e. value of EXI is not equal to 0000000…
1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.6ColumnvirtualIfGFPIntervalTHecSbErrorread-onlycurrentThis counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Type header (i.e. tHEC field), encoun…
1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.7ColumnvirtualIfGFPIntervalTHecMbErrorread-onlycurrentThis counter is associated withthe number of received GFP frames that are detected to only have multi-bit errors in the Type header (i.e. tHEC field), encounte…
1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.8ColumnvirtualIfGFPIntervalCidMismatchread-onlycurrentThis counter is associated with the number of received GFP frames that are detected to have a mismatch/unsupported value in the CID field only, encountered by …
1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.9ColumnvirtualIfGFPIntervalEHecSbErrorread-onlycurrentThis counter is associated with the number of received GFP frames that are detected to only have single-bit errors in the Extension header (i.e. eHEC field), e…
1.3.6.1.4.1.164.3.1.6.2.1.6.8.1.10ColumnvirtualIfGFPIntervalEHecMbErrorread-onlycurrentThis counter is associated with the the number of received GFP frames that are detected to only have multi-bit errors in the Extension header (i.e. eHEC field)…
1.3.6.1.4.1.164.3.1.6.2.2NodeprtSonetConfig
1.3.6.1.4.1.164.3.1.6.2.2.1NodeprtSonetGen
1.3.6.1.4.1.164.3.1.6.2.2.1.1TableprtSonetGenTablenot-accessiblecurrentSonet/SDH general port configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.1.1.1RowprtSonetGenEntrynot-accessiblecurrentAn entry in the Sonet/SDH general port configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.1ColumnprtSonetGenCnfgIdxread-onlycurrentThis object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati…
1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.2ColumnprtSonetGenIdxread-onlycurrentThis object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.
1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.3ColumnprtSonetGenSdThresholdread-writecurrentSD=Signal Degraded Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10E-4 n5= …
1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.4ColumnprtSonetGenEedThresholdread-writecurrentEED=Excessive Error Defect Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10…
1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.5ColumnprtSonetGenBerEnableread-writecurrentControls the activation of the Line Ber (Bit Error Rate), means whether SD and EED threshold parameters will be enabled.
1.3.6.1.4.1.164.3.1.6.2.2.2NodeprtSonetStm1
1.3.6.1.4.1.164.3.1.6.2.2.2.1TableprtSonetStm1Tablenot-accessiblecurrentSonet/SDH STM-1 port configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1RowprtSonetStm1Entrynot-accessiblecurrentAn entry in the Sonet/SDH STM-1 port configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.1ColumnprtSonetStm1CnfgIdxread-onlycurrentThis object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati…
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.2ColumnprtSonetStm1Idxread-onlycurrentThis object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.3ColumnprtSonetStm1ClockSrcread-writecurrentClock Source of the STM-1 port. lbt = Loop Back Timing.
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.4ColumnprtSonetStm1DccModeread-writecurrentDCC Mode. DCC=Data Communication Channel. d1ToD3 = D1-D3 bytes are used (RS=Regeneration Section). d4ToD12= D4-D12 bytes are used (MS=Multiplexing Section). d1…
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.5ColumnprtSonetStm1RoutingProtread-writecurrentRouting Protocol.
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.6ColumnprtSonetStm1MngProtread-writecurrentManagement Protocol over DCC: Proprietary, PPP or Frame Relay.
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.7ColumnprtSonetStm1OperationalModeread-writecurrentOperational Mode. linear - cannot be selected when there is Redundancy between the STM-1 ports.
1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.8ColumnprtSonetStm1VoiceChannelread-writecurrentThis parameter enable user to select whether voice channel will be transferred using E1 byte, E2 Byte, or not at all.
1.3.6.1.4.1.164.3.1.6.2.2.3NodeprtSonetVc
1.3.6.1.4.1.164.3.1.6.2.2.3.1TableprtSonetVcTablenot-accessiblecurrentSonet/SDH VC port configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1RowprtSonetVcEntrynot-accessiblecurrentAn entry in the Sonet/SDH VC port configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.1ColumnprtSonetVcCnfgIdxread-onlycurrentThis object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati…
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.2ColumnprtSonetVcIdxread-onlycurrentThis object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.3ColumnprtSonetVcJTxPathTraceEnableread-writecurrentEnable/Disable Transmitting Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer.
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.4ColumnprtSonetVcJRxPathTraceEnableread-writecurrentEnable/Disable checking Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer.
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.5ColumnprtSonetVcJPathTraceread-writecurrentJy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer. This object is applicable only if one of the previous 2 objects is 'enable'.
1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.6ColumnprtSonetVcConnectread-writecurrentConnect VCn (n - 11,12,2,3,4) port (yes/no).
1.3.6.1.4.1.164.3.1.6.2.2.3.2TableprtSonetTuTablenot-accessiblecurrentThe write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch).
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1RowprtSonetTuEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.1ColumnprtSonetTuCnfgIdxread-onlycurrentThis object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati…
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.2ColumnprtSonetTuPrtIdxread-onlycurrentThis object indicates a unique port or interface number. For port numbering, see product's spec. For some products, the numbering can equal ifIndex.
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.3ColumnprtSonetTuIdxread-onlycurrentThis object indicates a unique TU (Tributary Unit) within VC-4. The valid TUs are 1..63.
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.4ColumnprtSonetTuConPrtIdxread-onlycurrentThis object indicates the connected port, when prtSonetTuType=connect. For port numbering, see product's spec. For some products, the numbering can equal ifInd…
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.5ColumnprtSonetTuTyperead-createcurrentThe type of TU (Tributary Unit). connect - connected to one of the E1 ports. bypass - bypassed to the other VC4 port. TUs that are not connected or bypassed, w…
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.6ColumnprtSonetTuModeread-createcurrentTU Mode of connection. addAndDrop - Add & Drop add - Add (TU receives from the E1 ports).
1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.7ColumnprtSonetTuRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.3.1.6.2.2.4NodeprtVcGroupCnfg
1.3.6.1.4.1.164.3.1.6.2.2.4.1TablevcGroupCnfgTablenot-accessiblecurrentThe Virtual Concatenation Group configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.4.1.1RowvcGroupCnfgEntrynot-accessiblecurrentAn entry in the Virtual Concatenation Group configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.1ColumnvcGroupCnfgIdxnot-accessiblecurrentThis object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati…
1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.2ColumnvcGroupCnfgNumbernot-accessiblecurrentVirtual Concatenation Group Number. For FCD=155 up to four groups are defined valid values are 1..4
1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.3ColumnvcGroupCnfgRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.4ColumnvcGroupCnfgVcTyperead-createcurrentUser may select type of SDH Virtual Containers (VC) (SONET Virtual Tributaries VT ) to be concatenated in this Virtual Concatenation Group. For SDH, values 2,3…
1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.5ColumnvcGroupCnfgNoOfVCsread-createcurrentUser may select number of Virtual Containers (VC) (SONET Virtual Tributaries VT ) to be concatenated in this Virtual Concatenation Group. Valid range for this …
1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.6ColumnvcGroupCnfgLCASread-createcurrentThis object controls Link Capacity Adjustment Scheme (LCAS) activation.
1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.7ColumnvcGroupCnfgEncapsulationread-createcurrentThis object enables user to select encapsulation method.
1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.8ColumnvcGroupCnfgGroupIfIndexread-onlycurrentThe ifIndex assigend to this group.
1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.9ColumnvcGroupCnfgRip2read-createcurrentThis object controls RIP 2. User may select to send RIP 2 message over selected group or not
1.3.6.1.4.1.164.3.1.6.2.2.4.1.1.10ColumnvcGroupCnfgGfpChIdread-createcurrentGeneric Framing Procedure (GFP) Channel ID, Valid only when vcGroupCnfgEncapsulation = gfp (4) Valid values are 0x00 - oxFF (hex)
1.3.6.1.4.1.164.3.1.6.2.2.4.2TablevcgGfpMuxCnfgTablenot-accessiblecurrentThe Virtual Concatenation Group GFP Mux configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.4.2.1RowvcgGfpMuxCnfgEntrynot-accessiblecurrentAn entry in the Virtual Concatenation Group GFP Mux configuration table.
1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.1ColumnvcgGfpMuxCnfgIdxnot-accessiblecurrentThis object indicates the Index of the configuration being accessed. Index of 255 relates to the Temporary (Scratch) coninguration. For products that support s…
1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.2ColumnvcgGfpMuxCnfgMuxNumbernot-accessiblecurrentVirtual Concatenation Group GFP Mux Number. For FCD=155 up to 2 GFP muxes can be created.
1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.3ColumnvcgGfpMuxCnfgRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.4ColumnvcgGfpMuxCnfgMuxNameread-createcurrentVirtual Concatenation Group, GFP Mux name.
1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.5ColumnvcgGfpMuxCnfgPrimeGroupread-createcurrentIndex of Virtual Concatenation Group used as Primary for the GFP mux created for FCD 155 four Virtual Concatenation Group are defined: 1 -> Virtual Concatenati…
1.3.6.1.4.1.164.3.1.6.2.2.4.2.1.6ColumnvcgGfpMuxCnfgGrpBwAllocread-createcurrentThis object indicates the allocated bandwidth (BW) to each Virtual Concatenation Group (VCG). Each nibble indicates BW percentage, in 12.5% steps, assigned to …
1.3.6.1.4.1.164.3.1.6.2.3NodeprtSonetXConnect
1.3.6.1.4.1.164.3.1.6.2.3.1TableprtSonetXConnectTablenot-accessiblecurrentThe write operation into the Table's Objects is valid only for the TmpCnfg entry (Scratch).
1.3.6.1.4.1.164.3.1.6.2.3.1.1RowprtSonetXConnectEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.1.6.2.3.1.1.1ColumnprtSonetXConnectCnfgIdxread-onlycurrentThis object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati…
1.3.6.1.4.1.164.3.1.6.2.3.1.1.2ColumnprtSonetXConnectPrtIdxread-onlycurrentThis object indicates a unique port or interface number. For port numbering, see product's spec. For some products, the numbering can equal ifIndex.
1.3.6.1.4.1.164.3.1.6.2.3.1.1.3ColumnprtSonetXConnectConPrtIdxread-onlycurrentThis object indicates the connected port. For port numbering, see product's spec. For some products, the numbering can equal ifIndex. notApplicable - will be i…
1.3.6.1.4.1.164.3.1.6.2.3.1.1.4ColumnprtSonetXConnectAUGIdxread-onlycurrentThis object indicates an AUG (Administrative Unit Group) within STM-N. The valid AUGs values are: 1 for STM-1 1...4 for STM-4, 1..16 for STM-16 and 1..64 for S…
1.3.6.1.4.1.164.3.1.6.2.3.1.1.5ColumnprtSonetXConnectTUG3Idxread-onlycurrentThis object indicates a TUG-3 (Tributary Unit Group 3) within VC-4. The valid TUG3s are values are 1..3. and 255 which designates NA
1.3.6.1.4.1.164.3.1.6.2.3.1.1.6ColumnprtSonetXConnectTUG2Idxread-onlycurrentThis object indicates a TUG2 (Tributary Unit Group 2 ) within VC-3. The valid TUG2's values are 1..7 and 255 which designates NA
1.3.6.1.4.1.164.3.1.6.2.3.1.1.7ColumnprtSonetXConnectTUnIdxread-onlycurrentThis object indicates a TUn within TUG-2 or TUG-3 (Tributary Unit n, where n is 2, 12 or 11 within TUG-2, or 3 within TUG-3) valid values are 1 for TU-2 1 for …
1.3.6.1.4.1.164.3.1.6.2.3.1.1.8ColumnprtSonetXConnectRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.3.1.6.2.3.1.1.9ColumnprtSonetXConnectDirectionread-createcurrentTU direction of connection. rx=Drop tx=Add both = Add & Drop
1.3.6.1.4.1.164.3.1.6.2.3.1.1.10ColumnprtSonetXConnectTuNumberread-createcurrentThis object indicates which TU is used in prtSonetXConnectTUnIdx
1.3.6.1.4.1.164.3.1.6.3Nodeds3Interface
1.3.6.1.4.1.164.3.1.6.3.1NodeprtDs3PerfHistory
1.3.6.1.4.1.164.3.1.6.3.1.1TableprtSDs3IfTablenot-accessiblecurrentThe DS3 interface table.
1.3.6.1.4.1.164.3.1.6.3.1.1.1RowprtDs3IfEntrynot-accessiblecurrentAn entry in the DS3 interface table.
1.3.6.1.4.1.164.3.1.6.3.1.1.1.1ColumnprtDs3IfTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the near end current error- measurement period.
1.3.6.1.4.1.164.3.1.6.3.1.1.1.2ColumnprtDs3IfValidIntervalsread-onlycurrentThe number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 h…
1.3.6.1.4.1.164.3.1.6.3.1.2TableprtDs3CurrentTablenot-accessiblecurrentThe DS3 Current table.
1.3.6.1.4.1.164.3.1.6.3.1.2.1RowprtDs3CurrentEntrynot-accessiblecurrentAn entry in the DS3 Current table.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.1ColumnprtDs3CurrentLOSread-onlycurrentThe counter associated with the number of LOS seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.2ColumnprtDs3CurrentOOFread-onlycurrentThe counter associated with the number of OOF seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.3ColumnprtDs3CurrentLOCread-onlycurrentThe counter associated with the number of LOC seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.4ColumnprtDs3CurrentAISread-onlycurrentThe counter associated with the number of AIS seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.5ColumnprtDs3CurrentRDIread-onlycurrentThe counter associated with the number of RDI seconds, encountered by a DS3 interface.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.6ColumnprtDs3CurrentUASread-onlycurrentThe counter associated with the number of UAS, encountered by a SONET interface.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.7ColumnprtDs3CurrentBIPread-onlycurrentThe counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.8ColumnprtDs3CurrentFEBEread-onlycurrentThe counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.9ColumnprtDs3CurrentSLMread-onlycurrentThe counter associated with the number of SLM seconds, encountered by an E3 (only ) interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.10ColumnprtDs3CurrentSESread-onlycurrentThe counter associated with the number of SES encountered by a E3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.11ColumnprtDs3CurrentESread-onlycurrentThe number of Errored Seconds, encountered by a DS3 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.12ColumnprtDs3CurrentBitParityread-onlycurrentBit Parity Error counter. Relevant to T3 only.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.13ColumnprtDs3CurrentPlcpLOFread-onlycurrentThe counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter …
1.3.6.1.4.1.164.3.1.6.3.1.2.1.14ColumnprtDs3CurrentPlcpRAIread-onlycurrentReceiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.15ColumnprtDs3CurrentPlcpBIPread-onlycurrentThe counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (exte…
1.3.6.1.4.1.164.3.1.6.3.1.2.1.16ColumnprtDs3CurrentPlcpFEBEread-onlycurrentThe counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (ext…
1.3.6.1.4.1.164.3.1.6.3.1.2.1.17ColumnprtDs3CurrentBPVread-onlycurrentNumber of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Electrical Line of Fo…
1.3.6.1.4.1.164.3.1.6.3.1.2.1.18ColumnprtDs3CurrentLCEread-onlycurrentNumber of LCE (Link Code Errors) encountered by a DS3 interface in the current 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/T3.
1.3.6.1.4.1.164.3.1.6.3.1.2.1.19ColumnprtDs3CurrentStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.3.1.3TableprtDs3IntervalTablenot-accessiblecurrentThe DS3 Interval table.
1.3.6.1.4.1.164.3.1.6.3.1.3.1RowprtDs3IntervalEntrynot-accessiblecurrentAn entry in the DS3 Interval table.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.1ColumnprtDs3IntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.3.1.6.3.1.3.1.2ColumnprtDs3IntervalLOSread-onlycurrentThe counter associated with the number of LOS seconds , encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.3ColumnprtDs3IntervalOOFread-onlycurrentThe counter associated with the number of OOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.4ColumnprtDs3IntervalLOCread-onlycurrentThe counter associated with the number of LOC seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.5ColumnprtDs3IntervalAISread-onlycurrentThe counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.6ColumnprtDs3IntervalRDIread-onlycurrentThe counter associated with the number of RDI seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.7ColumnprtDs3IntervalUASread-onlycurrentThe counter associated with the number of UAS, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.8ColumnprtDs3IntervalBIPread-onlycurrentThe counter associated with the number of BIP errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.9ColumnprtDs3IntervalFEBEread-onlycurrentThe counter associated with the number of FEBE errors, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.10ColumnprtDs3IntervalSLMread-onlycurrentThe counter associated with the number of SLM seconds, encountered by an E3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.11ColumnprtDs3IntervalSESread-onlycurrentThe counter associated with the number of SES encountered by a E3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.12ColumnprtDs3IntervalESread-onlycurrentThe number of Errored Seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.13ColumnprtDs3IntervalBitParityread-onlycurrentBit Parity Error counter. Relevant to T3 only.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.14ColumnprtDs3IntervalPlcpLOFread-onlycurrentThe counter associated with the number of LOF seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. This counter …
1.3.6.1.4.1.164.3.1.6.3.1.3.1.15ColumnprtDs3IntervalPlcpRAIread-onlycurrentReceiving Yellow/Remote Alarm Indication. This counter is relevant for PLCP (external/internal) frame types only.
1.3.6.1.4.1.164.3.1.6.3.1.3.1.16ColumnprtDs3IntervalPlcpBIPread-onlycurrentThe counter associated with the number of BIP errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (exte…
1.3.6.1.4.1.164.3.1.6.3.1.3.1.17ColumnprtDs3IntervalPlcpFEBEread-onlycurrentThe counter associated with the number of FEBE errors, encountered by a DS3 interface in the current 15 minute interval. This counter is relevant for PLCP (ext…
1.3.6.1.4.1.164.3.1.6.3.1.3.1.18ColumnprtDs3IntervalBPVread-onlycurrentNumber of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Electrical Line of …
1.3.6.1.4.1.164.3.1.6.3.1.3.1.19ColumnprtDs3IntervalLCEread-onlycurrentNumber of LCE (Link Code Errors) encountered by a DS3 interface in the specified 15 minute interval. This object is relevant only for Optical Links of Fomi-E3/…
1.3.6.1.4.1.164.3.1.6.3.1.3.1.20ColumnprtDs3IntervalStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.3.1.4TableprtDs3TotalTablenot-accessiblecurrentA list of Total entries.
1.3.6.1.4.1.164.3.1.6.3.1.4.1RowprtDs3TotalEntrynot-accessiblecurrentAn entry of Total table.
1.3.6.1.4.1.164.3.1.6.3.1.4.1.6ColumnprtDs3TotalUASread-onlycurrentNumber of UASs (Unavailable Seconds) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
1.3.6.1.4.1.164.3.1.6.3.1.4.1.17ColumnprtDs3TotalBPVread-onlycurrentNumber of BPVs (Bi-Polar Violations) , encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
1.3.6.1.4.1.164.3.1.6.3.1.4.1.18ColumnprtDs3TotalLCEread-onlycurrentNumber of LCE (Link Code Errors) encountered by a DS3 interface in the previous 96 intervals. Invalid 15 minute intervals count as 0.
1.3.6.1.4.1.164.3.1.6.4Nodeds1Interface
1.3.6.1.4.1.164.3.1.6.4.1NodeprtDs1PerfHistory
1.3.6.1.4.1.164.3.1.6.4.1.2Tabledsx1XCurrentTablenot-accessiblecurrentA list of current statistics entries. This table contains additional objects for the current table.
1.3.6.1.4.1.164.3.1.6.4.1.2.1Rowdsx1XCurrentEntrynot-accessiblecurrentAn entry containing additional statistical counters applicable to a particular current table.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.1Columndsx1CurrentLOSread-onlycurrentThe counter associated with the number of LOS seconds, encountered by a DS1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.2Columndsx1CurrentLOFread-onlycurrentThe counter associated with the number of LOF seconds, encountered by a DS1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.3Columndsx1CurrentLOCread-onlycurrentLoss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation .
1.3.6.1.4.1.164.3.1.6.4.1.2.1.4Columndsx1CurrentAISread-onlycurrentThe counter associated with the number of AIS seconds, encountered by a DS1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.5Columndsx1CurrentRAIread-onlycurrentRemote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received…
1.3.6.1.4.1.164.3.1.6.4.1.2.1.6Columndsx1CurrentLOMFread-onlycurrentLoss of Multi-Frame sequence in E1 time slot 16.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.7Columndsx1CurrentFEBEread-onlycurrentFar End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.8Columndsx1CurrentStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.4.1.2.1.9Columndsx1CurrentBPVread-onlycurrentThe counter associated with the number of BPVs (Bi-Polar Violations) encountered by a DS1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.2.1.10Columndsx1CurrentLOCRCMFread-onlycurrentLoss of CRC4 Multi-Frame sequence in E1. encountered in the current 15 minute interval
1.3.6.1.4.1.164.3.1.6.4.1.2.1.11Columndsx1CurrentLOFCread-onlycurrentCounts the number of loss of frame events measured. encountered in the current 15 minute interval
1.3.6.1.4.1.164.3.1.6.4.1.2.1.12Columndsx1CurrentCRCErrorsread-onlycurrentCounts the number of CRC error events, encountered in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.4.1.3Tabledsx1XIntervalTablenot-accessiblecurrentA list of Interval entries. This table contains additional objects for the interval table.
1.3.6.1.4.1.164.3.1.6.4.1.3.1Rowdsx1XIntervalEntrynot-accessiblecurrentAn entry containing additional statistical counters applicable to a particular interval table.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.1Columndsx1IntervalLOSread-onlycurrentThe counter associated with the number of LOS seconds , encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.2Columndsx1IntervalLOFread-onlycurrentThe counter associated with the number of OOF seconds, encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.3Columndsx1IntervalLOCread-onlycurrentLoss Of Cell delineation. Counts number of cells the ATM UNI cells receiver lost cells delineation .
1.3.6.1.4.1.164.3.1.6.4.1.3.1.4Columndsx1IntervalAISread-onlycurrentThe counter associated with the number of AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.5Columndsx1IntervalRAIread-onlycurrentRemote Alarm Indication: Transmitted in the outgoing direction (toward the PABX) over FDL bits when the DS1 device detected an incoming Loss Of Frame. Received…
1.3.6.1.4.1.164.3.1.6.4.1.3.1.6Columndsx1IntervalLOMFread-onlycurrentLoss of Multi-Frame sequence in E1 time slot 16.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.7Columndsx1IntervalFEBEread-onlycurrentFar End Block Errors, as reported in the first bit of frames 13 and 15, on multiframe E1 lines with CRC4, in one of the previous 96, individual, 15 minute inte…
1.3.6.1.4.1.164.3.1.6.4.1.3.1.8Columndsx1IntervalStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.4.1.3.1.9Columndsx1IntervalBPVread-onlycurrentThe counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.10Columndsx1IntervalLOCRCMFread-onlycurrentLoss of CRC4 Multi-Frame sequence in E1.
1.3.6.1.4.1.164.3.1.6.4.1.3.1.11Columndsx1IntervalLOFCread-onlycurrentCounts the number of loss of frame events measured in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.4.1.4Tabledsx1XTotalTablenot-accessiblecurrentA list of Total statistics entries. This table contains additional objects for the Total table.
1.3.6.1.4.1.164.3.1.6.4.1.4.1Rowdsx1XTotalEntrynot-accessiblecurrentAn entry containing additional statistical counters applicable to a particular current table.
1.3.6.1.4.1.164.3.1.6.4.1.4.1.9Columndsx1TotalBPVread-onlycurrentThe counter associated with the number of BPV (Bi-Polar Violations) encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute interval…
1.3.6.1.4.1.164.3.1.6.4.1.4.1.11Columndsx1TotalLOFCread-onlycurrentThe counter associated with the number loss of frames encountered by a DS1 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
1.3.6.1.4.1.164.3.1.6.4.2Tabledsx1XConfigTablenot-accessiblecurrentAn extension to the DS1 Configuration table.
1.3.6.1.4.1.164.3.1.6.4.2.1Rowdsx1XConfigEntrynot-accessiblecurrentAn entry containing additional configuration parameters.
1.3.6.1.4.1.164.3.1.6.4.2.1.1Columndsx1IdleCoderead-writecurrentByte pattern of the data received/transmitted in the E1T1 framer idle timeslots. Valid range: (0 - FF HEX).
1.3.6.1.4.1.164.3.1.6.4.2.1.2Columndsx1LineModeread-writecurrentT1 device operation mode. Valid for T1 only.
1.3.6.1.4.1.164.3.1.6.4.2.1.3Columndsx1dBTxGainread-writecurrentTransmit line Gain for T1 CSU line mode.
1.3.6.1.4.1.164.3.1.6.4.2.1.4Columndsx1RxSensitivityread-writecurrentDetermine the maximum attenuation of the receive signal that can be compensated for by the interface receive path. Not applicable for T1.
1.3.6.1.4.1.164.3.1.6.4.2.1.5Columndsx1RestoreTimeread-writecurrentUsed to change the sync. algorithms to reduce the time required for the port to return to normal operation after a RED alarm.
1.3.6.1.4.1.164.3.1.6.4.2.1.6Columndsx1TcFirstSignalread-writecurrentTrunk conditioning signal - value to be sent as a signal during the first 2.5 seconds after alarm detection. Range is 0x0..0xF. 0xFF is a NULL value. Valid for…
1.3.6.1.4.1.164.3.1.6.4.2.1.7Columndsx1TcSignalread-writecurrentTrunk conditioning signal value after alarm detection. Range is 0x1..0xF for E1, and 0x0..0xF for T1.
1.3.6.1.4.1.164.3.1.6.4.2.1.8Columndsx1TcPatternread-writecurrentTrunk conditioning data pattern to be sent upon a DS0 fail. Range is 0x0..0xFF.
1.3.6.1.4.1.164.3.1.6.4.2.1.9Columndsx1Scrambleread-writecurrentScrambling is an operation that randomizes the bits of the payload of the ATM cell by a polynom. This operation helps with the error detection mechanism of the…
1.3.6.1.4.1.164.3.1.6.4.2.1.10Columndsx1LineAdaptiveTimingModeread-writecurrentEnables end to end clock synchronization. Default value - off.
1.3.6.1.4.1.164.3.1.6.4.2.1.11Columndsx1TxClockSourceread-writecurrentThe source of Transmit Clock. 'loopTiming' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' indicates that a local clock…
1.3.6.1.4.1.164.3.1.6.4.2.1.12Columndsx1AisEnableread-writecurrentEnable/ disable AIS transmit when Ethernet cable (for TDMoIP) is out (disconnected).
1.3.6.1.4.1.164.3.1.6.4.2.1.13Columndsx1TsEchoCancelread-writecurrentThis parameter defines for each TS whether Echo-Cancellation is on. Each bit represents one TS as follow: First octet bit'0' = TS#1, bit'7' = TS#8, .. 2nd octe…
1.3.6.1.4.1.164.3.1.6.4.2.1.14Columndsx1EchoCancelerModuleread-onlycurrentThis parameter indicates whether echo-cancellation module exists for this line.
1.3.6.1.4.1.164.3.1.6.4.2.1.15Columndsx1PortFunctionread-writecurrentThis object determines the ATM Mode over the physical port. uni - The port will function as an ATM UNI. ces - The port will function as a CES. ima - The port w…
1.3.6.1.4.1.164.3.1.6.4.2.1.16Columndsx1PortMultiplierread-writecurrentThis object determines the data rate of each TS (Kbps units). This parameter is applicable for T1 only.
1.3.6.1.4.1.164.3.1.6.4.2.1.17Columndsx1LeasedLineread-writecurrentThis parameter defines whether Line mode is regular (non Leased Line mode) or transparent (Leased Line mode).
1.3.6.1.4.1.164.3.1.6.4.2.1.18Columndsx1CsuLoopread-writecurrentThis parameter defines whether CSU loop will be done locally (by IPmux) or will be transferred to the TDM device.
1.3.6.1.4.1.164.3.1.6.5NodehdlcMibObjects
1.3.6.1.4.1.164.3.1.6.5.1TablehdlcTablenot-accessiblecurrentThe HDLC configuration table.
1.3.6.1.4.1.164.3.1.6.5.1.1RowhdlcEntrynot-accessiblecurrentDefines the contents of each line in the RAD HDLC Table.
1.3.6.1.4.1.164.3.1.6.5.1.1.1ColumnhdlcProtocolread-writecurrentThe HDLC protocol type V35 - HDLC encapsulated over V35 X21 - HDLC encapsulated over X21 RS530 - HDLC encapsulated over RS530
1.3.6.1.4.1.164.3.1.6.5.1.1.2ColumnhdlcRateResolutionread-writecurrentThe baud rate of the internal clock.
1.3.6.1.4.1.164.3.1.6.5.1.1.3ColumnhdlcTxClockSourceread-writecurrentThe baud rate of the internal clock.
1.3.6.1.4.1.164.3.1.6.5.1.1.4ColumnhdlcTerminalModeread-writecurrent.
1.3.6.1.4.1.164.3.1.6.5.1.1.5ColumnhdlcLoopbackStateread-writecurrentinternal - All data coming from the network port is looped back external - All data comming from the line is looped back.
1.3.6.1.4.1.164.3.1.6.5.1.1.6ColumnhdlcTxClockPolarityread-writecurrentnormal - The transmitted data is sampled at the middle of bit time inverse - The transmitted data is sampled at the end of the bit time (high data rate/long ca…
1.3.6.1.4.1.164.3.1.6.5.1.1.7ColumnhdlcFlowControlread-writecurrentEnable/Disable the CTS/RTS flow control signals.
1.3.6.1.4.1.164.3.1.6.5.1.1.8ColumnhdlcLineRateread-writecurrentThe rate values for HDLC are n*56/64Kbps, where 1<=n<=32, 64, 128 and the following values: 1544, 3088, 6176. The rate values for HSSI is nMbps, where 1<=n<=52.
1.3.6.1.4.1.164.3.1.6.5.1.1.9ColumnhdlcRxClockModeread-writecurrent.
1.3.6.1.4.1.164.3.1.6.5.1.1.10ColumnhdlcLOFread-onlycurrentTotal number of seconds the port is in Loss Of Frame state.
1.3.6.1.4.1.164.3.1.6.5.1.1.11ColumnhdlcRxClockPolarityread-writecurrentnormal - The received data is sampled at the middle of bit time inverse - The received data is sampled at the end of the bit time (high data rate/long cable).
1.3.6.1.4.1.164.3.1.6.5.2NodehdlcPerformance
1.3.6.1.4.1.164.3.1.6.5.2.1TablehdlcCurrentTablenot-accessiblecurrentThe HDLC Current table.
1.3.6.1.4.1.164.3.1.6.5.2.1.1RowhdlcCurrentEntrynot-accessiblecurrentAn entry in the HDLC Current table.
1.3.6.1.4.1.164.3.1.6.5.2.1.1.1ColumnhdlcCurrentIfIndexread-onlycurrentThe index of the HDLC interface. It may be ifIndex.
1.3.6.1.4.1.164.3.1.6.5.2.1.1.2ColumnhdlcCurrentStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.5.2.1.1.3ColumnhdlcCurrentLOFread-onlycurrentThe counter associated with the number of seconds the port is in Loss Of Frame state, encountered by the HDLC interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.5.2.1.1.4ColumnhdlcCurrentInFramesread-onlycurrentThe counter associated with the number of received frames, encountered by the HDLC interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.5.2.1.1.5ColumnhdlcCurrentInErrorsread-onlycurrentThe counter associated with the number of Errored received frames, encountered by the HDLC interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.5.2.1.1.6ColumnhdlcCurrentOutFramesread-onlycurrentThe counter associated with the number of transmitted frames, encountered by the HDLC interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.5.2.1.1.7ColumnhdlcCurrentAbortedFramesread-onlycurrentThe counter associated with the number of frames, in which at least seven consecutive '1'-s (Abort sequence) were encountered by the HDLC interface in the curr…
1.3.6.1.4.1.164.3.1.6.5.2.1.1.8ColumnhdlcCurrentLengthErrorread-onlycurrentThe counter associated with the number of received frames with length error, encountered by the HDLC interface in the current 15 minute interval.
1.3.6.1.4.1.164.3.1.6.5.2.2TablehdlcIntervalTablenot-accessiblecurrentThe HDLC Interval table.
1.3.6.1.4.1.164.3.1.6.5.2.2.1RowhdlcIntervalEntrynot-accessiblecurrentAn entry in the HDLC Interval table.
1.3.6.1.4.1.164.3.1.6.5.2.2.1.1ColumnhdlcIntervalIfIndexread-onlycurrentThe index of the HDLC interface. It may be ifIndex.
1.3.6.1.4.1.164.3.1.6.5.2.2.1.2ColumnhdlcIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.3.1.6.5.2.2.1.3ColumnhdlcIntervalStatusread-onlycurrentThe statuses of the current interval: 0 - Valid. 1 - redundantLinkSwitch - the link has been switched by a redundancy mechanism. 2 - discontinuity - module was…
1.3.6.1.4.1.164.3.1.6.5.2.2.1.4ColumnhdlcIntervalLOFread-onlycurrentThe counter associated with the number of seconds the port is in Loss Of Frame state, encountered by an HDLC interface in one of the previous 96, individual 15…
1.3.6.1.4.1.164.3.1.6.5.2.2.1.5ColumnhdlcIntervalInFramesread-onlycurrentThe counter associated with the number of received frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.5.2.2.1.6ColumnhdlcIntervalInErrorsread-onlycurrentThe counter associated with the number of Errored received frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.5.2.2.1.7ColumnhdlcIntervalOutFramesread-onlycurrentThe counter associated with the number of transmitted frames, encountered by the HDLC interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.3.1.6.5.2.2.1.8ColumnhdlcIntervalAbortedFramesread-onlycurrentThe counter associated with the number of frames, in which at least seven consecutive '1'-s (Abort sequence) were encountered by the HDLC interface in one of t…
1.3.6.1.4.1.164.3.1.6.5.2.2.1.9ColumnhdlcIntervalLengthErrorread-onlycurrentThe counter associated with the number of received frames with length error, encountered by the HDLC interface in one of the previous 96, individual 15 minute,…
1.3.6.1.4.1.164.3.3NodedacsMux
1.3.6.1.4.1.164.3.3.1NodesystemDacsMux
1.3.6.1.4.1.164.3.3.1.3NodesysStatus
1.3.6.1.4.1.164.3.3.1.3.7ScalarsysSClkSrcread-onlycurrentThis entry indicates the source of the system clock.
1.3.6.1.4.1.164.3.3.1.6NodesysConfig
1.3.6.1.4.1.164.3.3.1.6.1TablesysCClkSrcTablenot-accessiblecurrentAll the entries of this table are identical (have the same value) for all the configurations (1..255) except the TmpCnfg. The write operation into the Table Ob…
1.3.6.1.4.1.164.3.3.1.6.1.1RowsysCClkSrcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.3.3.1.6.1.1.1ColumnsysCClkCnfgIdxread-onlycurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.3.3.1.6.1.1.2ColumnsysCClkSrcIdxread-onlycurrentAn index in the table. There are only two entries in the table. master - refers Master clock parameters fallback - refers Fallback clock parameters
1.3.6.1.4.1.164.3.3.1.6.1.1.3ColumnsysCClkSrcModeread-writecurrentThis entry indicates the source the nodal timing is locked to. none - is an invalid option for Master clock. internal - is an invalid option for Fallback clock…
1.3.6.1.4.1.164.3.3.1.6.1.1.4ColumnsysCClkSrcPrtread-writecurrentThis entry is valid only when working in rxClk mode. For ACE2002 in case of invalid entry the return value will be 0. For other products in case of invalid ent…
1.3.6.1.4.1.164.3.3.1.6.1.1.5ColumnsysCClkStationFreqread-writecurrentThis entry indicates the frequency of the station clock when the source is 'station'. The value will be applicable only when the sysCClkSrcMode is 'station'.
1.3.6.1.4.1.164.3.3.1.6.1.1.6ColumnsysCClkRevertiveTimeoutread-writecurrentThe time in seconds in which the system will monitor the higher level clock source, before decision to revert to that clock. In case the time is zero, revertiv…
1.3.6.1.4.1.164.4NoderadBridges
1.3.6.1.4.1.164.4.1NodegenBridge
1.3.6.1.4.1.164.4.1.1ScalarradBridgeActionread-writecurrentThis variable enables the operator to perform one of the specified actions on the tables maintained by the network device. Send actions are not currently imple…
1.3.6.1.4.1.164.4.1.2ScalarradBridgeInactiveArpTimeOutread-writecurrentThis variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is del…
1.3.6.1.4.1.164.4.1.3TableradBridgeMaskTablenot-accessiblecurrentMask tables enable definition of forwarding restrictions and control of message flow in the internetwork. Each entry in this table defines a mask statement con…
1.3.6.1.4.1.164.4.1.3.1RowradBridgeMaskEntrynot-accessiblecurrentAn entry in table radBridgeMaskTable.
1.3.6.1.4.1.164.4.1.3.1.1ColumnradBridgeMaskTyperead-writecurrentDefines the type of mask entry.
1.3.6.1.4.1.164.4.1.3.1.2ColumnradBridgeMaskIfIndexread-writecurrentSpecifies the if Index of the interface to which the mask is applied.
1.3.6.1.4.1.164.4.1.3.1.3ColumnradBridgeMaskNumread-writecurrentThe Mask entry number, defined by its line number in the mask table.
1.3.6.1.4.1.164.4.1.3.1.4ColumnradBridgeMaskDestread-writecurrentSpecifies the type of destination address carried by the frame to which the mask will be applied. Unassigned-condition deactivates the mask entry.
1.3.6.1.4.1.164.4.1.3.1.5ColumnradBridgeMaskPat1read-writecurrentDescribes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern.
1.3.6.1.4.1.164.4.1.3.1.6ColumnradBridgeMaskActiveBit1read-writecurrentSpecifies the positions of the wild card characters (*) in the radBridgeMaskPat1 field.
1.3.6.1.4.1.164.4.1.3.1.7ColumnradBridgeMaskFrom1read-writecurrentOffset base of radBridgeMaskPat1 within the frame. Net can be in some cases the data start point.
1.3.6.1.4.1.164.4.1.3.1.8ColumnradBridgeMaskOffset1read-writecurrentSpecifies the radBridgeMaskPat1 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm1.The mask offset is an even decimal number in …
1.3.6.1.4.1.164.4.1.3.1.9ColumnradBridgeMaskCond1read-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset1 the packet contains data th…
1.3.6.1.4.1.164.4.1.3.1.10ColumnradBridgeMaskPat2read-writecurrentDescribes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern.
1.3.6.1.4.1.164.4.1.3.1.11ColumnradBridgeMaskActiveBit2read-writecurrentSpecifies the positions of the wild card characters (*) in the radBridgeMaskPat2 field.
1.3.6.1.4.1.164.4.1.3.1.12ColumnradBridgeMaskFrom2read-writecurrentOffset base of radBridgeMaskPat2 within the frame. Net can be in some cases the data start point.
1.3.6.1.4.1.164.4.1.3.1.13ColumnradBridgeMaskOffset2read-writecurrentSpecifies the radBridgeMaskPat2 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm2.The mask offset is an even decimal number in …
1.3.6.1.4.1.164.4.1.3.1.14ColumnradBridgeMaskCond2read-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset2 the packet contains data th…
1.3.6.1.4.1.164.4.1.3.1.15ColumnradBridgeMaskPat3read-writecurrentDescribes the mask field which is either a 16 bit binary pattern, or four digit hexadecimal pattern.
1.3.6.1.4.1.164.4.1.3.1.16ColumnradBridgeMaskActiveBit3read-writecurrentSpecifies the positions of the wild card characters (*) in the radBridgeMaskPat3 field.
1.3.6.1.4.1.164.4.1.3.1.17ColumnradBridgeMaskFrom3read-writecurrentOffset base of radBridgeMaskPat3 within the frame. Net can be in some cases the data start point.
1.3.6.1.4.1.164.4.1.3.1.18ColumnradBridgeMaskOffset3read-writecurrentSpecifies the radBridgeMaskPat3 offset within the frame (in bytes) from the base defined in by radBridgeMaskForm3. The mask offset is an even decimal number in…
1.3.6.1.4.1.164.4.1.3.1.19ColumnradBridgeMaskCond3read-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by radBridgeMaskOffset3 the packet contains data th…
1.3.6.1.4.1.164.4.1.3.1.20ColumnradBridgeMaskOperread-writecurrentThe type of action to be taken if the frame meets the conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is remove…
1.3.6.1.4.1.164.4.1.4NoderadBridgeCOD
1.3.6.1.4.1.164.4.1.4.1TableradBridgeCODParamTablenot-accessiblecurrentThe table of COD parameters
1.3.6.1.4.1.164.4.1.4.1.1RowradBridgeCODEntrynot-accessiblecurrentEach radBridgeCODEntry consists of the following parameters
1.3.6.1.4.1.164.4.1.4.1.1.1ColumnradBridgeCODIfIndexread-onlycurrentThe interface to which this COD entry is applicable.
1.3.6.1.4.1.164.4.1.4.1.1.2ColumnradBridgeCODManualConnectread-writecurrentThe management station can start connection manually by setting this parameter
1.3.6.1.4.1.164.4.1.4.1.1.3ColumnradBridgeCODModeread-writecurrentIn answer mode only one incoming call may be accepted at a time. Other nodes attempting to access the local modem will receive a busy signal until the connecti…
1.3.6.1.4.1.164.4.1.4.1.1.4ColumnradBridgeCODConnectDelayread-writecurrentThe connect delay defines the minimum time period that the link must stay disconnected, between 2 succesive connections (in seconds).
1.3.6.1.4.1.164.4.1.4.1.1.5ColumnradBridgeCODisConnectDelayread-writecurrentThe disconnect delay defines the minimum time period the link must stay connected, between 2 succesive disconnections (in seconds).
1.3.6.1.4.1.164.4.1.4.1.1.6ColumnradBridgeCODImplicitSwitchread-writecurrentThe inplicit switch allows the user to ignore implicit triggers provided by the COD software.
1.3.6.1.4.1.164.4.1.4.1.1.7ColumnradBridgeCODNumAccessread-onlycurrentThe number of successful connections that have been established since the COD has been reset.
1.3.6.1.4.1.164.4.1.4.1.1.8ColumnradBridgeCODTotalConnecTimeread-onlycurrentThe sum of all the connect time intervals since the COD was reset.
1.3.6.1.4.1.164.4.1.4.2TableradBridgeCODTimeTriggerTablenot-accessiblecurrentThe table of COD parameters
1.3.6.1.4.1.164.4.1.4.2.1RowradBridgeCODTimeTriggerEntrynot-accessiblecurrentEach radBridgeCODTimeTriggerEntry consists of the following parameters
1.3.6.1.4.1.164.4.1.4.2.1.1ColumnradBridgeCODTimeIfIndexread-onlycurrentThe interface to which this COD Time Trigger entry is applicable.
1.3.6.1.4.1.164.4.1.4.2.1.2ColumnradBridgeCODDayread-onlycurrentThe day of the week in which the dial up connection operates.
1.3.6.1.4.1.164.4.1.4.2.1.3ColumnradBridgeCODTimeTriggerNumread-onlycurrentEvery day of the week the user can configure 3 dial up connections.
1.3.6.1.4.1.164.4.1.4.2.1.4ColumnradBridgeCODTimeTriggerFromread-writecurrentTime to start Dial Up connection, in format hh:mm.
1.3.6.1.4.1.164.4.1.4.2.1.5ColumnradBridgeCODTimeTriggerToread-writecurrentTime to terminate Dial Up connection, in format HH:MM.
1.3.6.1.4.1.164.4.1.4.2.1.6ColumnradBridgeCODTimeTriggerStatusread-writecurrentThe status of a table entry.
1.3.6.1.4.1.164.4.1.4.3NoderadBridgeCODTraffic
1.3.6.1.4.1.164.4.1.4.3.1TableradBridgeCODTrafficTablenot-accessiblecurrentThe table of COD Traffic trigger
1.3.6.1.4.1.164.4.1.4.3.1.1RowradBridgeCODTrafficEntrynot-accessiblecurrentEach radBridgeCODTrafficEntry consists of the following parameters.
1.3.6.1.4.1.164.4.1.4.3.1.1.1ColumnradBridgeCODProtocolTyperead-writecurrentThe Protocol Type of the Traffic Table
1.3.6.1.4.1.164.4.1.4.3.1.1.2ColumnradBridgeCODTrafficTriggerStatusread-writecurrentCommand of Status of the Protocol Traffic Trigger
1.3.6.1.4.1.164.4.1.4.3.2ScalarradBridgeCODRemoteIPAddrread-writecurrentThis is the Remote IP Address
1.3.6.1.4.1.164.4.1.4.3.3ScalarradBridgeCODIPMaskread-writecurrentThis is the Mask of the Remote IP Address
1.3.6.1.4.1.164.4.1.4.3.4ScalarradBridgeCODTrafficTriggerProtTyperead-writecurrentProtocol Type for the User Defined Protocol Traffic Trigger (3).
1.3.6.1.4.1.164.4.1.4.4TableradBridgeCODCondTablenot-accessiblecurrentThe table of COD Condition parameters
1.3.6.1.4.1.164.4.1.4.4.1RowradBridgeCODCondEntrynot-accessiblecurrentEach radBridgeCODCondEntry consists of the following parameters
1.3.6.1.4.1.164.4.1.4.4.1.1ColumnradBridgeCODCondIfIndexread-onlycurrentThe interface, this COD entry is applicable to.
1.3.6.1.4.1.164.4.1.4.4.1.2ColumnradBridgeCODOriginateConnectConditionread-writecurrentThis condition, allows the user to specify the condition under which the link is connected. The options are onPowerOn - On power on. whenAnyStationOnLan - When…
1.3.6.1.4.1.164.4.1.4.4.1.3ColumnradBridgeCODOriginateDisConnectConditionread-writecurrentThis condition allows the user to specify the condition under which the link is disconnected. The options are: noStationOnLan - When there is no station on lan…
1.3.6.1.4.1.164.4.1.4.4.1.4ColumnradBridgeCODOriginateDisConnectDelayread-writecurrentDelay time in seconds.
1.3.6.1.4.1.164.4.1.4.4.1.5ColumnradBridgeCODAnswerConnectConditionread-writecurrentCODCondAnswerConnect allows the user to specify the condition under which the link is connected. The options are: onPowerOn - On power on. whenAnyStationOnLan …
1.3.6.1.4.1.164.4.1.4.4.1.6ColumnradBridgeCODSpecificOnTrafficOIDConditionread-onlycurrentA reference to a specific entry in the radBridgeMaskTable, which describes the particular COD condition . If Connect or Disconnect Conditions are not onTraffic…
1.3.6.1.4.1.164.4.1.4.4.1.7ColumnradBridgeCODDisConnectMinimunFramesNumberread-writecurrentFrames rate.
1.3.6.1.4.1.164.4.1.5NoderadBridgeIPX
1.3.6.1.4.1.164.4.1.5.1NoderadBridgeIPXdriver
1.3.6.1.4.1.164.4.1.5.1.1ScalarradBridgeIPXForwardingread-writecurrentThe indication of whether this entity is acting as an IPX gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IPX…
1.3.6.1.4.1.164.4.1.5.2NoderadBridgeIPXRip
1.3.6.1.4.1.164.4.1.5.2.1ScalarradBridgeIPXRipOutPacketsread-onlycurrentThe total number of packets transmitted by RIP.
1.3.6.1.4.1.164.4.1.5.2.2ScalarradBridgeIPXRipInPacketsread-onlycurrentThe total number of packets received by RIP. This will include any packets that are subsequently discarded.
1.3.6.1.4.1.164.4.1.5.2.3ScalarradBridgeIPXRipInDiscardsread-onlycurrentThe number of received packets discarded by RIP.
1.3.6.1.4.1.164.4.1.5.2.4ScalarradBridgeIPXRipTblNoOfEntriesread-onlycurrentThe max number of entries that exist in the RIP routing table.
1.3.6.1.4.1.164.4.1.5.2.5ScalarradBridgeIPXRipTblBcastTrigUpdateIntervalread-writecurrentThe default time interval (in seconds)between triggered RIP updates on a broadcast type interface. A triggered update occurs when a change is detected in the r…
1.3.6.1.4.1.164.4.1.5.2.6TableradBridgeIPXRipTablenot-accessiblecurrentThe routing table used by RIP to calculate routes to remote desination networks.
1.3.6.1.4.1.164.4.1.5.2.6.1RowradBridgeIPXRipTableEntrynot-accessiblecurrentThe routing information for one of this entity's destination networks.
1.3.6.1.4.1.164.4.1.5.2.6.1.1ColumnradBridgeIPXRipDestNetworkread-onlycurrentThe destination network address to which this entry's routing information pertains.
1.3.6.1.4.1.164.4.1.5.2.6.1.2ColumnradBridgeIPXRipPolicyread-onlycurrentA value specifying the precidence of the route. A value of zero means that the route is the best route, a value of one means that the route is the second best …
1.3.6.1.4.1.164.4.1.5.2.6.1.3ColumnradBridgeIPXRipForwardingRouterread-writecurrentThe IPX node address of the next hop (router) for the entry's associated destination network.
1.3.6.1.4.1.164.4.1.5.2.6.1.4ColumnradBridgeIPXRipNICread-writecurrentAn interface identifier specifying what IPX interface the next hop can be found on.
1.3.6.1.4.1.164.4.1.5.2.6.1.5ColumnradBridgeIPXRipTickMetricread-writecurrentThe metric, in terms of transit time, associated with the route given by the entry. This time is in terms of 1/18ths of a second.
1.3.6.1.4.1.164.4.1.5.2.6.1.6ColumnradBridgeIPXRipHopMetricread-writecurrentThe metric, in terms of distance , associated with the route given by the entry.
1.3.6.1.4.1.164.4.1.5.2.6.1.7ColumnradBridgeIPXRipAgingTimeread-onlycurrentThe last time that the entry was updated. The time will be provided in terms of the MIB-I object sysUpTime.
1.3.6.1.4.1.164.4.1.5.2.6.1.8ColumnradBridgeIPXRipValueStatusread-writecurrentThe entry status value; whether the entry is permanent (added statically), reachable or unreachable. In the latter two cases it would be added by RIP. A semiDy…
1.3.6.1.4.1.164.4.1.5.2.6.1.9ColumnradBridgeIPXRipForwardTyperead-writecurrentThe type of route. Note that local(2) refers to a route for which the next hop is the final destination; remote(3) refers to a route for which the next hop is …
1.3.6.1.4.1.164.4.1.5.2.7TableradBridgeIPXRipInfTablenot-accessiblecurrentThe RIP interface table.
1.3.6.1.4.1.164.4.1.5.2.7.1RowradBridgeIPXRipInfEntrynot-accessiblecurrentEach entry corresponds to one ifindex.
1.3.6.1.4.1.164.4.1.5.2.7.1.1ColumnradBridgeIPXRipInfIfIndexread-onlycurrentThis value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table.
1.3.6.1.4.1.164.4.1.5.2.7.1.2ColumnradBridgeIPXRipInfBcastUpdateread-writecurrentThe RIP periodic update interval, in seconds. Zero value corresponds to infinite interval.
1.3.6.1.4.1.164.4.1.5.2.7.1.3ColumnradBridgeIPXRipInfAgeMultiplierread-writecurrentThe holding multiplier for information received in RIP periodic updates. Zero value corresponds to infinite aging time.
1.3.6.1.4.1.164.4.1.5.3NoderadBridgeIPXSap
1.3.6.1.4.1.164.4.1.5.3.1ScalarradBridgeIPXSapOutPacketsread-onlycurrentThe total number of packets transmitted by SAP.
1.3.6.1.4.1.164.4.1.5.3.2ScalarradBridgeIPXSapInPacketsread-onlycurrentThe total number of packets received by SAP. This will include any packets that are subsequently discarded.
1.3.6.1.4.1.164.4.1.5.3.3ScalarradBridgeIPXSapInDiscardsread-onlycurrentThe number of received packets discarded by SAP.
1.3.6.1.4.1.164.4.1.5.3.4ScalarradBridgeIPXSapTblNoOfEntriesread-onlycurrentThe max number of entries that exist in the SAP Server Information table.
1.3.6.1.4.1.164.4.1.5.3.5ScalarradBridgeIPXSapTblBcastTrigUpdateIntervalread-writecurrentThe default time interval (in seconds) between triggered SAP updates on a broadcast style interface. A triggered update occurs when a change is detected in the…
1.3.6.1.4.1.164.4.1.5.3.6TableradBridgeIPXSapTablenot-accessiblecurrentThe Server Information table is used by SAP to store information of services which are available on the internetwork.
1.3.6.1.4.1.164.4.1.5.3.6.1RowradBridgeIPXSapTableEntrynot-accessiblecurrentThe server information for one of this entity's server entries.
1.3.6.1.4.1.164.4.1.5.3.6.1.1ColumnradBridgeIPXSapServerTyperead-onlycurrentThe type of the server for which this entry pertains.
1.3.6.1.4.1.164.4.1.5.3.6.1.2ColumnradBridgeIPXSapNameread-onlycurrentThe name of the server for which this entry pertains.
1.3.6.1.4.1.164.4.1.5.3.6.1.3ColumnradBridgeIPXSapNetworkread-writecurrentThe IPX network address of the host on which this server exists.
1.3.6.1.4.1.164.4.1.5.3.6.1.4ColumnradBridgeIPXSapNoderead-writecurrentThe IPX node address of the host on which this server exists.
1.3.6.1.4.1.164.4.1.5.3.6.1.5ColumnradBridgeIPXSapSocketread-writecurrentThe IPX socket number that is being used by the server to which this entry pertains.
1.3.6.1.4.1.164.4.1.5.3.6.1.6ColumnradBridgeIPXSapHopsToServerread-writecurrentThe number of hops to the entity on which this server exists.
1.3.6.1.4.1.164.4.1.5.3.6.1.7ColumnradBridgeIPXSapNICread-writecurrentAn Network Interface Card identifier specifying what IPX interface the next hop can be found on.
1.3.6.1.4.1.164.4.1.5.3.6.1.8ColumnradBridgeIPXSapAgingTimeread-onlycurrentThe last time that the entry was updated. The time will be provided in terms of the MIB-I object sysUpTime.
1.3.6.1.4.1.164.4.1.5.3.6.1.9ColumnradBridgeIPXSapStatusread-writecurrentThe status of the entry.
1.3.6.1.4.1.164.4.1.5.3.7TableradBridgeIPXSapInfTablenot-accessiblecurrentThe Sap interface table.
1.3.6.1.4.1.164.4.1.5.3.7.1RowradBridgeIPXSapInfEntrynot-accessiblecurrentEach entry corresponds to one ifindex.
1.3.6.1.4.1.164.4.1.5.3.7.1.1ColumnradBridgeIPXSapInfIfIndexread-onlycurrentThis value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table.
1.3.6.1.4.1.164.4.1.5.3.7.1.2ColumnradBridgeIPXSapInfBcastUpdateread-writecurrentThe SAP periodic update interval, in seconds. Zero value corresponds to infinite interval.
1.3.6.1.4.1.164.4.1.5.3.7.1.3ColumnradBridgeIPXSapInfAgeMultiplierread-writecurrentThe holding multiplier for information received in SAP periodic updates. Zero value corresponds to infinite aging time.
1.3.6.1.4.1.164.4.1.6NodenewMasking
1.3.6.1.4.1.164.4.1.6.1ScalarmaskingMaxEntriesread-onlycurrentThe maximum number of entries in the masking table.
1.3.6.1.4.1.164.4.1.6.2ScalarmaskingCurrentEntriesread-onlycurrentThe number of entries in the mask table.
1.3.6.1.4.1.164.4.1.6.3TablemaskingTablenot-accessiblecurrentThis is the new masking scheme. Mask tables enable definition of forwarding restrictions and control of message flow in the internetwork. Each entry in this ta…
1.3.6.1.4.1.164.4.1.6.3.1RowmaskingEntrynot-accessiblecurrentDefines the contents of each line in the mask table.
1.3.6.1.4.1.164.4.1.6.3.1.1ColumnmaskingTyperead-writecurrentDefines the type of mask entry.
1.3.6.1.4.1.164.4.1.6.3.1.2ColumnmaskingIfIndexread-writecurrentSpecifies the ifIndex of the interface to which the mask is applied.
1.3.6.1.4.1.164.4.1.6.3.1.3ColumnmaskingIndexread-writecurrentAn index to the masking table. This number should not be greater than maskingMaxEntries
1.3.6.1.4.1.164.4.1.6.3.1.4ColumnmaskingProtocolTyperead-writecurrentThe base protocol for masking. IPX, IP, others.
1.3.6.1.4.1.164.4.1.6.3.1.5ColumnmaskingSmartMaskOIDread-onlycurrentA reference to a specific Smart mask table (old radBridgeMaskTable) which enables a more specific mask type. If this information is not available, its value sh…
1.3.6.1.4.1.164.4.1.6.3.1.6ColumnmaskingFrameTyperead-writecurrentEnables the user to decide about frame type * all frame * just broadcast * just multicast.
1.3.6.1.4.1.164.4.1.6.3.1.7ColumnmaskingFrameTypeConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingFrameType the packet contains data that m…
1.3.6.1.4.1.164.4.1.6.3.1.8ColumnmaskingSourceAddressread-writecurrentThe source address is according to the maskingMacOrNet and maskingProtocolType variables. In case of 'MAC' enter 6 bytes (48 bit) of source address. In case of…
1.3.6.1.4.1.164.4.1.6.3.1.9ColumnmaskingSourceActiveBitsread-writecurrentSpecifies the positions of the wild card characters (*) in the maskingSourceAddress field. Only the 1's bit will be taken in considerations.
1.3.6.1.4.1.164.4.1.6.3.1.10ColumnmaskingSourceMacOrNetread-writecurrentThe variable maskingSourceAddress and maskingSourceActiveBits will be treated as MAC, or NET address. - If maskingProtocolType = 'all', 'sna', 'netbios', dec o…
1.3.6.1.4.1.164.4.1.6.3.1.11ColumnmaskingSourceConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingSourceAddress (in conjunction with maskin…
1.3.6.1.4.1.164.4.1.6.3.1.12ColumnmaskingDestAddressread-writecurrentIf maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. The destination a…
1.3.6.1.4.1.164.4.1.6.3.1.13ColumnmaskingDestActiveBitsread-writecurrentIf maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the pos…
1.3.6.1.4.1.164.4.1.6.3.1.14ColumnmaskingDestMacOrNetread-writecurrentIf maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. - If maskingProto…
1.3.6.1.4.1.164.4.1.6.3.1.15ColumnmaskingDestConditionread-writecurrentIf maskingFrameType = broadcast or multicast, this object is NOT APPLICABLE. If maskingFrameType = all or unknown, this object is applicable. Specifies the log…
1.3.6.1.4.1.164.4.1.6.3.1.16ColumnmaskingLowLevelProtread-writecurrentThis field is set in conjunction with the maskingProtocolType variable. This variable specifies the low level protocol. The IPX socket entered in maskingDestAd…
1.3.6.1.4.1.164.4.1.6.3.1.17ColumnmaskingLowLevelProtConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingLowLevelProt the packet contains data tha…
1.3.6.1.4.1.164.4.1.6.3.1.18ColumnmaskingHighLevelProtread-writecurrentThis field is set in connection to the maskingProtocolType variable. This variable specifies the high level protocols (application). As for today it supports j…
1.3.6.1.4.1.164.4.1.6.3.1.19ColumnmaskingHighLevelProtConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingHighLevelProt the packet contains data th…
1.3.6.1.4.1.164.4.1.6.3.1.20ColumnmaskingPortNumread-writecurrentThe port number is the same as in high level protocol. It specifies the dest. port in IP case or the dest. socket in case of IPX & apple protocols. IP - This o…
1.3.6.1.4.1.164.4.1.6.3.1.21ColumnmaskingPortNumConditionread-writecurrentSpecifies the logical condition of the mask pattern: true - Condition is valid if at the position specified by maskingPortNum the packet contains data that mat…
1.3.6.1.4.1.164.4.1.6.3.1.22ColumnmaskingOperationread-writecurrentThe type of action to be taken if the frame meets the conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is remove…
1.3.6.1.4.1.164.4.1.6.3.1.23ColumnmaskingSrcPortNumread-writecurrentThe source port number. For IP: No Condition. For IPX: This object is applicable only if the socket entered in maskingSourceAddress is don't care (00) and mask…
1.3.6.1.4.1.164.4.1.6.3.1.24ColumnmaskingSrcPortNumConditionread-writecurrentThe same as 'maskingPortNumCondition'. Relates to source port.
1.3.6.1.4.1.164.4.1.7NoderadBridgePerformance
1.3.6.1.4.1.164.4.1.7.1TableradBridgeCurrentTablenot-accessiblecurrentThe RAD Bridge Current table.
1.3.6.1.4.1.164.4.1.7.1.1RowradBridgeCurrentEntrynot-accessiblecurrentAn entry in the RAD Bridge Current table.
1.3.6.1.4.1.164.4.1.7.1.1.1ColumnradBridgeCurrentIndexread-onlycurrentThe index of the Bridge interface. It may be ifIndex.
1.3.6.1.4.1.164.4.1.7.1.1.2ColumnradBridgeCurrentIngressFilteringDiscardedFramesread-onlycurrentThe counter associated with the number of Discarded Frames upon Ingress Filtering, encountered by a Bridge interface in the current 15 minute interval.
1.3.6.1.4.1.164.4.1.7.1.1.3ColumnradBridgeCurrentFrameTypeDiscardedFramesread-onlycurrentThe counter associated with the number of Discarded Frames upon Frame Type and Tagging Mismatch, encountered by a Bridge interface in the current 15 minute int…
1.3.6.1.4.1.164.4.1.7.2TableradBridgeIntervalTablenot-accessiblecurrentThe RAD Bridge Interval table.
1.3.6.1.4.1.164.4.1.7.2.1RowradBridgeIntervalEntrynot-accessiblecurrentAn entry in the RAD Bridge Interval table.
1.3.6.1.4.1.164.4.1.7.2.1.1ColumnradBridgeIntervalIndexread-onlycurrentThe index of the bridge interface. It may be ifIndex.
1.3.6.1.4.1.164.4.1.7.2.1.2ColumnradBridgeIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.4.1.7.2.1.3ColumnradBridgeIntervalIngressFilteringDiscardedFramesread-onlycurrentThe counter associated with the number of Discarded Frames upon Ingress Filtering, encountered by a Bridge interface in one of the previous 96, individual 15 m…
1.3.6.1.4.1.164.4.1.7.2.1.4ColumnradBridgeIntervalFrameTypeDiscardedFramesread-onlycurrentThe counter associated with the number of Discarded Frames upon Frame Type and Tagging Mismatch, encountered by a Bridge interface in one of the previous 96, i…
1.3.6.1.4.1.164.4.1.8NoderadBridgePortBaseVlan
1.3.6.1.4.1.164.4.1.8.1TableradBridgePortBaseVlanTablenot-accessiblecurrentA table containing static configuration information for each VLAN configured into the device by management. All entries are permanent and will be restored afte…
1.3.6.1.4.1.164.4.1.8.1.1RowradBridgePortBaseVlanEntrynot-accessiblecurrentStatic information for a VLAN configured into the device by (local or network) management.
1.3.6.1.4.1.164.4.1.8.1.1.1ColumnradBridgePortBaseVlanCnfgIdxnot-accessiblecurrentThis object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Ag…
1.3.6.1.4.1.164.4.1.8.1.1.2ColumnradBridgePortBaseVlanIdxnot-accessiblecurrentIndex of the port based VLAN.
1.3.6.1.4.1.164.4.1.8.1.1.3ColumnradBridgePortBaseVlanNameread-createcurrentAn administratively assigned string, which may be used to identify the the port based VLAN.
1.3.6.1.4.1.164.4.1.8.1.1.4ColumnradBridgePortBaseVlanEgressPortsread-createcurrentThe set of ports which are permanently assigned to the egress list for this port based VLAN by management. The default value of this object is a string of zero…
1.3.6.1.4.1.164.4.1.8.1.1.5ColumnradBridgePortBaseVlanVirtualGroupsread-createcurrentThe set of Virtual Groups which are permanently assigned to this port based VLAN by management. (read Virtual Group instead of port in PortList Textual Convent…
1.3.6.1.4.1.164.4.1.8.1.1.6ColumnradBridgePortBaseVlanRowStatusread-createcurrentThis object enable user to create/delete entries in this table.
1.3.6.1.4.1.164.4.1.8.1.1.7ColumnradBridgePortBaseVlanMngread-createcurrentThis object allows user to enable/disable management traffic on this VLAN.
1.3.6.1.4.1.164.4.1.8.2TableradBridgePortVlanMemberTablenot-accessiblecurrentThe Bridge Ports-VLAN Membership table. This table enables the user to assign: - Several VLANs to a Port. - Several Ports to a VLAN.
1.3.6.1.4.1.164.4.1.8.2.1RowradBridgePortVlanMemberEntrynot-accessiblecurrentAn entry in the Bridge Ports-VLANs Memebership table.
1.3.6.1.4.1.164.4.1.8.2.1.1ColumnradBridgePortVlanMemberBridgeIdxread-onlycurrentThis object indicates the Bridge Index.
1.3.6.1.4.1.164.4.1.8.2.1.2ColumnradBridgePortVlanMemberPortIdxread-onlycurrentThis object indicates the Bridge's Port Index. For some cases, it can be used as the Port ofIndex.
1.3.6.1.4.1.164.4.1.8.2.1.3ColumnradBridgePortVlanMemberVlanIdread-onlycurrentThis object indicates the VLAN ID.
1.3.6.1.4.1.164.4.1.8.2.1.4ColumnradBridgePortVlanMemberRowStatusread-createcurrentThis object enables the user to create/delete entries in this table.
1.3.6.1.4.1.164.4.1.9NoderadBridgeGenCnfg
1.3.6.1.4.1.164.4.1.9.1TableradBridgeGenFlowTablenot-accessiblecurrentA table containing static configuration information for Bridge configured into the device by (local or network) management. All entries are permanent and will …
1.3.6.1.4.1.164.4.1.9.1.1RowradBridgeGenFlowEntrynot-accessiblecurrentStatic information for a Bridge configured into the device by management.
1.3.6.1.4.1.164.4.1.9.1.1.1ColumnradBridgeGenFlowCnfgIdxnot-accessiblecurrentThis object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Ag…
1.3.6.1.4.1.164.4.1.9.1.1.2ColumnradBridgeGenFlowIdxnot-accessiblecurrentFor Agent having more than one bridge, this index may be used as bridge index
1.3.6.1.4.1.164.4.1.9.1.1.3ColumnradBridgeGenFlowRowStatusread-createcurrentThis object enable user to create/delete entries in this table.
1.3.6.1.4.1.164.4.1.9.1.1.4ColumnradBridgeGenFlowFloodOrBcastMaxRateread-createcurrentThis object controls maximum Flooding or Broadcast Rate: Max number of multicast along with unknown or flooded unicast frames allowed to enter any port. The nu…
1.3.6.1.4.1.164.4.1.9.1.1.5ColumnradBridgeGenFlowQosModeread-createcurrentThis object controls Quality of Service mode. User may select which field(s) (in case of fields - which one has precedence) will affect prioritization of data …
1.3.6.1.4.1.164.4.1.9.1.1.6ColumnradBridgeGenFlowSchedulingModeread-createcurrentThis object controls which scheduling mode is used: Weighted Fair Queuing (WFQ) scheme or Strict Priority (SP).
1.3.6.1.4.1.164.4.1.10NoderadBridgeStatus
1.3.6.1.4.1.164.4.1.10.1TableradBridgeInvBasePortTablenot-accessiblecurrentAn inversed table to dot1dBasePortTable from RFC1493 with reduced information. This table index is known to the NMS and this way the needed information can be …
1.3.6.1.4.1.164.4.1.10.1.1RowradBridgeInvBasePortEntrynot-accessiblecurrentThe bridge port number for each bridge port interface index.
1.3.6.1.4.1.164.4.1.10.1.1.1ColumnradBridgeInvBasePortIfIndexread-onlycurrentThe value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this Bridge port.
1.3.6.1.4.1.164.4.1.10.1.1.2ColumnradBridgeInvBasePortread-onlycurrentThe Bridge port number.
1.3.6.1.4.1.164.5NoderadConverters
1.3.6.1.4.1.164.6NoderadGen
1.3.6.1.4.1.164.6.1Nodesystems
1.3.6.1.4.1.164.6.1.0IdentitysystemsEventscurrentThe events for RAD products.
1.3.6.1.4.1.164.6.1.0.1NotificationtftpStatusChangeTrapcurrentThis trap is sent whenever the status of tftp changed.
1.3.6.1.4.1.164.6.1.0.2NotificationagnStatusChangeTrapcurrentThis trap is sent whenever the state of the entity the agent is responsible for changed. TDM devices will send agnTestStatus variable to indicate the current t…
1.3.6.1.4.1.164.6.1.0.3NotificationprtStatusChangeTrapcurrentThis trap is sent whenever the state of a port changed. Attached, will be parameter/s that indicate the new port status. The attached variables will be specifi…
1.3.6.1.4.1.164.6.1.0.4NotificationswdlStatusResultcurrentThis notification is sent when Software Down Load is finished. The attached object indicates the File Name.
1.3.6.1.4.1.164.6.1.0.5NotificationintSwdlSlotFileMismatchcurrentThis notification is sent when the card in the chosen slot doesn't match the chosen file. The attached object indicates the File Name.
1.3.6.1.4.1.164.6.1.0.6NotificationagnCounterChangecurrentThis notification is sent when the value of a specific Counter is changed. Agent can send as attached object the updated Counter. For details about this Counte…
1.3.6.1.4.1.164.6.1.0.7NotificationprtClkSrcChangeTrapcurrentThis trap is sent upon any port clock change.
1.3.6.1.4.1.164.6.1.0.8NotificationmoduleFailTrapcurrentThis trap is sent upon a module failure.
1.3.6.1.4.1.164.6.1.0.9NotificationmoduleInitFailTrapcurrentThis trap is sent upon a module initialization failure.
1.3.6.1.4.1.164.6.1.0.10NotificationclkSrcChangeTrapcurrentThis trap is sent upon any change in Clock Source.
1.3.6.1.4.1.164.6.1.0.11NotificationagnUploadDataTrapcurrentThis trap is sent upon an upload data session termination. For more details see product specification.
1.3.6.1.4.1.164.6.1.0.12NotificationenrollmentTrapcurrentThis trap is a periodically trap, which sent to manager untill Agent get any response (Get or Set) from this manager.
1.3.6.1.4.1.164.6.1.0.13NotificationagnPowerFailureTrapcurrentThis trap is sent upon power failure. It is applicable for the following devices: 1. Devices having one PS unit, which sense the failure in advance, and still …
1.3.6.1.4.1.164.6.1.1NoderadSysTR
1.3.6.1.4.1.164.6.1.1.1NoderadRADring
1.3.6.1.4.1.164.6.1.1.2NoderadTMA
1.3.6.1.4.1.164.6.1.1.3NoderadRingMonitor
1.3.6.1.4.1.164.6.1.2NoderadSysFddi
1.3.6.1.4.1.164.6.1.2.1NoderadFDX100
1.3.6.1.4.1.164.6.1.3NoderadSysWan
1.3.6.1.4.1.164.6.1.3.0IdentityradSysWanEventscurrentThe events for RAD Wan products.
1.3.6.1.4.1.164.6.1.3.1NoderadMP2100
1.3.6.1.4.1.164.6.1.3.2NoderadMP2104
1.3.6.1.4.1.164.6.1.3.3NoderadMP2100B
1.3.6.1.4.1.164.6.1.3.4NoderadMP2100F
1.3.6.1.4.1.164.6.1.3.5NoderadMP2100H
1.3.6.1.4.1.164.6.1.3.6NoderadMP2104H
1.3.6.1.4.1.164.6.1.3.7NoderadMP2200B
1.3.6.1.4.1.164.6.1.3.8NoderadMP2200F
1.3.6.1.4.1.164.6.1.3.9NoderadMX3000
1.3.6.1.4.1.164.6.1.3.10NoderadMX3004
1.3.6.1.4.1.164.6.1.3.11NoderadMX30
1.3.6.1.4.1.164.6.1.3.12NoderadMX300
1.3.6.1.4.1.164.6.1.3.13NoderadVOIP
1.3.6.1.4.1.164.6.1.3.15NoderadKM2100
1.3.6.1.4.1.164.6.1.3.16NoderadKM2104
1.3.6.1.4.1.164.6.1.3.20NoderadDXC30
1.3.6.1.4.1.164.6.1.3.21NoderadDXC10A
1.3.6.1.4.1.164.6.1.3.22NoderadDXC8R
1.3.6.1.4.1.164.6.1.3.23NoderadDXC30E
1.3.6.1.4.1.164.6.1.3.24NoderadDXC3000
1.3.6.1.4.1.164.6.1.3.25NoderadDXC8RNew
1.3.6.1.4.1.164.6.1.3.28NoderadFcdT1L
1.3.6.1.4.1.164.6.1.3.29NoderadFcdE1L
1.3.6.1.4.1.164.6.1.3.30NoderadFcdT1
1.3.6.1.4.1.164.6.1.3.31NoderadFcdE1
1.3.6.1.4.1.164.6.1.3.32NoderadFcdE1I
1.3.6.1.4.1.164.6.1.3.33NoderadFcdT1M
1.3.6.1.4.1.164.6.1.3.34NoderadFcdE1M
1.3.6.1.4.1.164.6.1.3.35NoderadFcdIP
1.3.6.1.4.1.164.6.1.3.36NoderadFcdT1A
1.3.6.1.4.1.164.6.1.3.37NoderadFcdE1A
1.3.6.1.4.1.164.6.1.3.38NoderadFcdW
1.3.6.1.4.1.164.6.1.3.39NoderadFcdSTM
1.3.6.1.4.1.164.6.1.3.40NoderadHtuE1Sa
1.3.6.1.4.1.164.6.1.3.41NoderadHtuE1
1.3.6.1.4.1.164.6.1.3.42NoderadHtu2Sa
1.3.6.1.4.1.164.6.1.3.43NoderadHtu2
1.3.6.1.4.1.164.6.1.3.44NoderadAsmi450R768Sa
1.3.6.1.4.1.164.6.1.3.45NoderadAsmi450R768
1.3.6.1.4.1.164.6.1.3.46NoderadAsmi450R1152Sa
1.3.6.1.4.1.164.6.1.3.47NoderadAsmi450R1152
1.3.6.1.4.1.164.6.1.3.48NoderadLrs12F
1.3.6.1.4.1.164.6.1.3.49NoderadLrs12B
1.3.6.1.4.1.164.6.1.3.50NoderadLrs52
1.3.6.1.4.1.164.6.1.3.51NoderadHcdE1Sa
1.3.6.1.4.1.164.6.1.3.52NoderadHcdE1
1.3.6.1.4.1.164.6.1.3.53NoderadHtuT1Sa
1.3.6.1.4.1.164.6.1.3.54NoderadHtuT1
1.3.6.1.4.1.164.6.1.3.55NoderadOptimux4E1
1.3.6.1.4.1.164.6.1.3.56NoderadOptimux4T1
1.3.6.1.4.1.164.6.1.3.57NoderadOptimuxXLE1
1.3.6.1.4.1.164.6.1.3.58NoderadOptimuxXLT1
1.3.6.1.4.1.164.6.1.3.59NoderadOptimuxXL16E1
1.3.6.1.4.1.164.6.1.3.60NoderadImx64
1.3.6.1.4.1.164.6.1.3.61NoderadImx6L
1.3.6.1.4.1.164.6.1.3.62NoderadImx2
1.3.6.1.4.1.164.6.1.3.63NoderadImx4T1
1.3.6.1.4.1.164.6.1.3.64NoderadImx4E1
1.3.6.1.4.1.164.6.1.3.65NoderadImx2T1E1
1.3.6.1.4.1.164.6.1.3.66NoderadImxi4
1.3.6.1.4.1.164.6.1.3.67NoderadOptimux155
1.3.6.1.4.1.164.6.1.3.68NoderadOptimux4T1L
1.3.6.1.4.1.164.6.1.3.69NoderadOptimux4E1L
1.3.6.1.4.1.164.6.1.3.70NoderadHtuE1SaV2
1.3.6.1.4.1.164.6.1.3.71NoderadHtuE1V2
1.3.6.1.4.1.164.6.1.3.72NoderadFomiE3
1.3.6.1.4.1.164.6.1.3.73NoderadFomiT3
1.3.6.1.4.1.164.6.1.3.74NoderadOpt4E1C
1.3.6.1.4.1.164.6.1.3.75NoderadOpt4T1C
1.3.6.1.4.1.164.6.1.3.76NoderadPrbiE3
1.3.6.1.4.1.164.6.1.3.77NoderadPrbiT3
1.3.6.1.4.1.164.6.1.3.78NoderadHcd4Sa
1.3.6.1.4.1.164.6.1.3.79NoderadOptimuxT3
1.3.6.1.4.1.164.6.1.3.80NoderadFRmon
1.3.6.1.4.1.164.6.1.3.81NoderadIpMux4
1.3.6.1.4.1.164.6.1.3.82NoderadIpMux1
1.3.6.1.4.1.164.6.1.3.83NoderadIpMux16
1.3.6.1.4.1.164.6.1.3.84NoderadIpMux1E
1.3.6.1.4.1.164.6.1.3.85NoderadVmux2100
1.3.6.1.4.1.164.6.1.3.86NoderadMP104
1.3.6.1.4.1.164.6.1.3.87NoderadMP204
1.3.6.1.4.1.164.6.1.3.88NoderadVmux110
1.3.6.1.4.1.164.6.1.3.90NoderadFcd155
1.3.6.1.4.1.164.6.1.3.91NoderadIpMux8
1.3.6.1.4.1.164.6.1.3.92NoderadOptimux155DS3
1.3.6.1.4.1.164.6.1.3.93NoderadOptimuxT3L
1.3.6.1.4.1.164.6.1.3.95NoderadOp16E1L
1.3.6.1.4.1.164.6.1.3.96NoderadOp16E1LS
1.3.6.1.4.1.164.6.1.3.97NoderadPRBm20
1.3.6.1.4.1.164.6.1.3.98NoderadPRBm22
1.3.6.1.4.1.164.6.1.3.100NoderadOpXLE1
1.3.6.1.4.1.164.6.1.3.101NoderadOpXLT1
1.3.6.1.4.1.164.6.1.3.102NoderadOpXL16E1
1.3.6.1.4.1.164.6.1.4NoderadSysBRG
1.3.6.1.4.1.164.6.1.4.1NoderadTRE1
1.3.6.1.4.1.164.6.1.4.2NoderadTRE1D
1.3.6.1.4.1.164.6.1.4.3NoderadTRE8
1.3.6.1.4.1.164.6.1.4.4NoderadTRE8D
1.3.6.1.4.1.164.6.1.4.5NoderadMBE1
1.3.6.1.4.1.164.6.1.4.6NoderadMBE1D
1.3.6.1.4.1.164.6.1.4.7NoderadMBE8
1.3.6.1.4.1.164.6.1.4.8NoderadMBE8D
1.3.6.1.4.1.164.6.1.4.9NoderadMLBT
1.3.6.1.4.1.164.6.1.4.10NoderadFEB4DAS
1.3.6.1.4.1.164.6.1.4.11NoderadTrimBrg10
1.3.6.1.4.1.164.6.1.4.12NoderadTrimBrg16
1.3.6.1.4.1.164.6.1.4.13NoderadRRTRE8
1.3.6.1.4.1.164.6.1.4.14NoderadRRTRE8D
1.3.6.1.4.1.164.6.1.4.15NoderadRRMLBT
1.3.6.1.4.1.164.6.1.4.16NoderadRRMLBTF
1.3.6.1.4.1.164.6.1.4.17NoderadRRTRE1D
1.3.6.1.4.1.164.6.1.4.18NoderadTRERAS
1.3.6.1.4.1.164.6.1.4.19NoderadTRERASa
1.3.6.1.4.1.164.6.1.4.20NoderadMBERAS
1.3.6.1.4.1.164.6.1.4.21NoderadMBERASa
1.3.6.1.4.1.164.6.1.4.22NoderadFEB4FDX
1.3.6.1.4.1.164.6.1.4.23NoderadFEB4SAS
1.3.6.1.4.1.164.6.1.4.24NoderadRRFTBDAS
1.3.6.1.4.1.164.6.1.4.25NoderadRRFTBSAS
1.3.6.1.4.1.164.6.1.4.26NoderadFTBDAS
1.3.6.1.4.1.164.6.1.4.27NoderadFTBSAS
1.3.6.1.4.1.164.6.1.4.28NoderadFastWay100
1.3.6.1.4.1.164.6.1.5NoderadSysCnvrtr
1.3.6.1.4.1.164.6.1.5.1NoderadSTC1
1.3.6.1.4.1.164.6.1.5.3NoderadSTC2
1.3.6.1.4.1.164.6.1.5.4NoderadSTC1UDP
1.3.6.1.4.1.164.6.1.5.6NoderadSTC2UDP
1.3.6.1.4.1.164.6.1.5.10NoderadFTC1
1.3.6.1.4.1.164.6.1.5.12NoderadFTC2
1.3.6.1.4.1.164.6.1.5.13NoderadFTC1UDP
1.3.6.1.4.1.164.6.1.5.15NoderadFTC2UDP
1.3.6.1.4.1.164.6.1.5.20NoderadSEC1
1.3.6.1.4.1.164.6.1.5.22NoderadSEC2
1.3.6.1.4.1.164.6.1.5.23NoderadSEC1UDP
1.3.6.1.4.1.164.6.1.5.25NoderadSEC2UDP
1.3.6.1.4.1.164.6.1.5.30NoderadFEC1
1.3.6.1.4.1.164.6.1.5.32NoderadFEC2
1.3.6.1.4.1.164.6.1.5.33NoderadFEC1UDP
1.3.6.1.4.1.164.6.1.5.35NoderadFEC2UDP
1.3.6.1.4.1.164.6.1.5.36NoderadRIC155
1.3.6.1.4.1.164.6.1.7NoderadSysStkHub
1.3.6.1.4.1.164.6.1.7.1NoderadRBHE
1.3.6.1.4.1.164.6.1.7.1.0IdentityradRBHEEventscurrentThe events for RAD Stackable products.
1.3.6.1.4.1.164.6.1.7.2NoderadRBHT
1.3.6.1.4.1.164.6.1.7.2.0IdentityradRBHTEventscurrentThe events for RAD Stackable products.
1.3.6.1.4.1.164.6.1.7.3NoderadETS4fddiDAS
1.3.6.1.4.1.164.6.1.7.4NoderadETS4fddiSAS
1.3.6.1.4.1.164.6.1.7.5NoderadSAHEMX
1.3.6.1.4.1.164.6.1.7.6NoderadSAHTM
1.3.6.1.4.1.164.6.1.7.7NoderadETS4
1.3.6.1.4.1.164.6.1.7.8NoderadSAHEMU
1.3.6.1.4.1.164.6.1.7.9Nodeunknown
1.3.6.1.4.1.164.6.1.7.10NoderadSAH16Eint
1.3.6.1.4.1.164.6.1.7.11NoderadSAH16Tint
1.3.6.1.4.1.164.6.1.7.12NoderadSAH16Eext
1.3.6.1.4.1.164.6.1.7.13NoderadSAH16Text
1.3.6.1.4.1.164.6.1.8NoderadSysPS
1.3.6.1.4.1.164.6.1.8.0IdentityradSysPSEventscurrentThe events for RAD Packet Switch (PS) products.
1.3.6.1.4.1.164.6.1.8.1NoderadSPS2
1.3.6.1.4.1.164.6.1.8.2NoderadSPS3
1.3.6.1.4.1.164.6.1.8.3NoderadSPS6
1.3.6.1.4.1.164.6.1.8.4NoderadSPS9
1.3.6.1.4.1.164.6.1.8.5NoderadSPS12
1.3.6.1.4.1.164.6.1.8.6NoderadAPD2
1.3.6.1.4.1.164.6.1.8.7NoderadAPD8
1.3.6.1.4.1.164.6.1.8.8NoderadAPS8
1.3.6.1.4.1.164.6.1.8.9NoderadAPS16
1.3.6.1.4.1.164.6.1.8.10NoderadAPS24
1.3.6.1.4.1.164.6.1.8.11NoderadSPS3S
1.3.6.1.4.1.164.6.1.8.12NoderadFPS8
1.3.6.1.4.1.164.6.1.8.13NoderadFPS12
1.3.6.1.4.1.164.6.1.8.14NoderadSPS3ScSL
1.3.6.1.4.1.164.6.1.8.15NoderadSPS3Sc2S
1.3.6.1.4.1.164.6.1.8.16NoderadFPS8c
1.3.6.1.4.1.164.6.1.8.17NoderadFPS4
1.3.6.1.4.1.164.6.1.9NoderadSysEth
1.3.6.1.4.1.164.6.1.9.1NoderadEP8T
1.3.6.1.4.1.164.6.1.9.2NoderadEP4TAUI
1.3.6.1.4.1.164.6.1.9.3NoderadEP4T2FL
1.3.6.1.4.1.164.6.1.9.4NoderadEP4TFL
1.3.6.1.4.1.164.6.1.9.5NoderadEP4FL
1.3.6.1.4.1.164.6.1.9.7NoderadEPR8T
1.3.6.1.4.1.164.6.1.9.8NoderadEPR4TAUI
1.3.6.1.4.1.164.6.1.9.9NoderadEPR4T2FL
1.3.6.1.4.1.164.6.1.9.10NoderadEPR4TFL
1.3.6.1.4.1.164.6.1.9.11NoderadEPR4FL
1.3.6.1.4.1.164.6.1.11NoderadSysRtr
1.3.6.1.4.1.164.6.1.11.0IdentityradSysRtrEventscurrentThe events for RAD Router products.
1.3.6.1.4.1.164.6.1.11.0.1NotificationrtrFACSViolationcurrentThe trap is sent for every violation of a FACS filter.
1.3.6.1.4.1.164.6.1.11.0.2NotificationrtrSwDwnLoadTrapcurrentThe trap is sent after the tftp download of the software and before the decompression and reset operations.
1.3.6.1.4.1.164.6.1.11.1NoderadRTED
1.3.6.1.4.1.164.6.1.11.2NoderadRTEM
1.3.6.1.4.1.164.6.1.11.3NoderadRTEC
1.3.6.1.4.1.164.6.1.11.4NoderadWebRanger
1.3.6.1.4.1.164.6.1.11.5NoderadTinyRouter
1.3.6.1.4.1.164.6.1.11.6NoderadLA240
1.3.6.1.4.1.164.6.1.11.7NoderadSuperLan
1.3.6.1.4.1.164.6.1.11.8NoderadLA240I
1.3.6.1.4.1.164.6.1.11.9NoderadFcdIsdn
1.3.6.1.4.1.164.6.1.11.10NoderadEFcdIp
1.3.6.1.4.1.164.6.1.11.11NoderadFcdIpD
1.3.6.1.4.1.164.6.1.11.12NoderadFcdIpM
1.3.6.1.4.1.164.6.1.12NoderadSysAtm
1.3.6.1.4.1.164.6.1.12.0IdentityradSysAtmEventscurrentThe events for RAD ATM products.
1.3.6.1.4.1.164.6.1.12.0.6NotificationatmAceSystemTrapcurrentThis trap alerts of major problems in the device.
1.3.6.1.4.1.164.6.1.12.0.7NotificationatmAceAlarmForwardingTrapcurrentThis trap is sent upon starting or stopping Alarm Forwarding Mechanism.
1.3.6.1.4.1.164.6.1.12.0.8NotificationatmAceDateAndTimeRequestcurrentThis trap is sent upon restart. It will send sysObjectID variable. Upon recieving this trap the NMS will set the device's date and time. This trap's purpose is…
1.3.6.1.4.1.164.6.1.12.0.16NotificationatmAceAlarmLOScurrentThis trap indicates Loss Of Signal.
1.3.6.1.4.1.164.6.1.12.0.17NotificationatmAceAlarmLOFcurrentThis trap indicates Loss Of Frame.
1.3.6.1.4.1.164.6.1.12.0.18NotificationatmAceAlarmLCDcurrentThis trap indicates Loss of Cell Delineation.
1.3.6.1.4.1.164.6.1.12.0.19NotificationatmAceAlarmSLMcurrentThis trap indicates Signal Line Mismatch.
1.3.6.1.4.1.164.6.1.12.0.20NotificationatmAceAlarmLOPcurrentThis trap indicates Loss of Pointer.
1.3.6.1.4.1.164.6.1.12.0.21NotificationatmAceAlarmLineAIScurrentThis trap indicates Line AIS.
1.3.6.1.4.1.164.6.1.12.0.22NotificationatmAceAlarmPathAIScurrentThis trap indicates Path AIS.
1.3.6.1.4.1.164.6.1.12.0.23NotificationatmAceAlarmLineRDIcurrentThis trap indicates Line RDI.
1.3.6.1.4.1.164.6.1.12.0.24NotificationatmAceAlarmPathRDIcurrentThis trap indicates Path RDIand Path RAI(Yellow) for DS1 interfaces.
1.3.6.1.4.1.164.6.1.12.0.25NotificationatmAceAlarmSectionBIPcurrentThis trap indicates Section Bit Interleave Parity.
1.3.6.1.4.1.164.6.1.12.0.26NotificationatmAceAlarmLineBIPcurrentThis trap indicates Line Bit Interleave Parity.
1.3.6.1.4.1.164.6.1.12.0.27NotificationatmAceAlarmPathBIPcurrentThis trap indicates Path Bit Interleave Parity.
1.3.6.1.4.1.164.6.1.12.0.28NotificationatmAceAlarmLineFEBEcurrentThis trap indicates Line Far End Block Error.
1.3.6.1.4.1.164.6.1.12.0.29NotificationatmAceAlarmPathFEBEcurrentThis trap indicates Path Far End Block Error.
1.3.6.1.4.1.164.6.1.12.0.30NotificationatmAceAlarmPlcpLOFcurrentThis trap indicates T3 PLCP Loss Of Frame.
1.3.6.1.4.1.164.6.1.12.0.31NotificationatmAceAlarmPlcpYELLOWcurrentThis trap indicates T3 Plcp Yellow.
1.3.6.1.4.1.164.6.1.12.0.32NotificationatmAceAlarmPlcpBIPcurrentThis trap indicates T3 Plcp Bit Interleave Parity.
1.3.6.1.4.1.164.6.1.12.0.33NotificationatmAceAlarmPlcpFEBEcurrentThis trap indicates T3 Plcp Far End Block Error.
1.3.6.1.4.1.164.6.1.12.0.34NotificationatmAceAlarmPlcpP1P2currentThis trap indicates T3 Plcp Parity errors in P1/P2 bytes.
1.3.6.1.4.1.164.6.1.12.0.35NotificationatmAceAlarmUAScurrentThis trap is sent upon UAS start or end per port.
1.3.6.1.4.1.164.6.1.12.0.36NotificationatmAceAlarmClustercurrentThis trap is sent upon atmNteAlarmType start or end, for a cluster of VPs/VCs (according to atmNteLevel) with the same alarm on the same physical port. This tr…
1.3.6.1.4.1.164.6.1.12.0.37NotificationatmAceHwFailurecurrentThis trap is sent upon HW failure per port.
1.3.6.1.4.1.164.6.1.12.0.38NotificationatmAceUnavailableBwTrapcurrentThis trap is sent when Bandwidth allocation is > max possible value for the installed card. For ACE2002 this trap will be sent for the following cases: Card in…
1.3.6.1.4.1.164.6.1.12.0.40NotificationatmAceAlarmVpContinuityLosscurrentThis trap indicates Loss of Continuity Check on a VP Connection.
1.3.6.1.4.1.164.6.1.12.0.41NotificationatmAceAlarmVpAISReceptioncurrentThis trap indicates AIS Reception on a VP Connection.
1.3.6.1.4.1.164.6.1.12.0.42NotificationatmAceAlarmVpRDIReceptioncurrentThis trap indicates RDI Reception on a VP Connection.
1.3.6.1.4.1.164.6.1.12.0.43NotificationatmAceAlarmVpErroredCellscurrentThis trap indicates Errored Cells on a VP Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.44NotificationatmAceAlarmVpLostCellscurrentThis trap indicates Lost Cells on a VP Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.45NotificationatmAceAlarmVpMisinsertedCellscurrentThis trap indicates Misinserted Cells on a VP Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.46NotificationatmAceAlarmVpUAScurrentThis trap is sent upon UAS start or end per VP.
1.3.6.1.4.1.164.6.1.12.0.47NotificationatmAceAlarmVpLoopbackcurrentThis trap is sent upon OAM LoopBack fail status per VP.
1.3.6.1.4.1.164.6.1.12.0.48NotificationatmAceAlarmVpGCRAViolationcurrentThis trap indicates GCRA violation on a VP Connection reported by UPC device.
1.3.6.1.4.1.164.6.1.12.0.56NotificationatmAceAlarmVcContinuityLosscurrentThis trap indicates Loss of Continuity Check on a VC Connection.
1.3.6.1.4.1.164.6.1.12.0.57NotificationatmAceAlarmVcAISReceptioncurrentThis trap indicates AIS Reception on a VC.
1.3.6.1.4.1.164.6.1.12.0.58NotificationatmAceAlarmVcRDIReceptioncurrentThis trap indicates RDI Reception on a VC Connection.
1.3.6.1.4.1.164.6.1.12.0.59NotificationatmAceAlarmVcErroredCellscurrentThis trap indicates Errored Cells on a VC Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.60NotificationatmAceAlarmVcLostCellscurrentThis trap indicates Lost Cells on a VC Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.61NotificationatmAceAlarmVcMisinsertedCellscurrentThis trap indicates Misinserted Cells on a VC Connection reported by PM.
1.3.6.1.4.1.164.6.1.12.0.62NotificationatmAceAlarmVcUnexpectedCellcurrentThis trap indicates an unexpected cell from user or network port.
1.3.6.1.4.1.164.6.1.12.0.63NotificationatmAceAlarmVcUAScurrentThis trap is sent upon UAS start or end per VC.
1.3.6.1.4.1.164.6.1.12.0.64NotificationatmAceAlarmVcLoopbackcurrentThis trap is sent upon OAM LoopBack fail status per VC.
1.3.6.1.4.1.164.6.1.12.0.65NotificationatmAceAlarmVcGCRAViolationcurrentThis trap indicates GCRA violation on a VC Connection reported by UPC device.
1.3.6.1.4.1.164.6.1.12.0.80NotificationatmImaGroupStatusChangeTrapcurrentThis trap indicates IMA Group status change.
1.3.6.1.4.1.164.6.1.12.1NoderadStarSwitch
1.3.6.1.4.1.164.6.1.12.1.1NoderadStarSwitchATM25
1.3.6.1.4.1.164.6.1.12.1.2NoderadStarSwitchATM25L
1.3.6.1.4.1.164.6.1.12.1.3NoderadStarSwitchATM155
1.3.6.1.4.1.164.6.1.12.2NoderadAtmCsuDsu
1.3.6.1.4.1.164.6.1.12.2.1NoderadAmcdE1
1.3.6.1.4.1.164.6.1.12.2.2NoderadAmcdT1
1.3.6.1.4.1.164.6.1.12.2.3NoderadAce20E
1.3.6.1.4.1.164.6.1.12.2.4NoderadAce20T
1.3.6.1.4.1.164.6.1.12.2.5NoderadAce2005
1.3.6.1.4.1.164.6.1.12.2.6NoderadAce2002
1.3.6.1.4.1.164.6.1.12.2.7NoderadAce2002E
1.3.6.1.4.1.164.6.1.12.2.8NoderadAce2E
1.3.6.1.4.1.164.6.1.12.2.9NoderadAce2T
1.3.6.1.4.1.164.6.1.12.2.10NoderadMlAtmE1
1.3.6.1.4.1.164.6.1.12.2.11NoderadMlAtmT1
1.3.6.1.4.1.164.6.1.12.2.12NoderadAmc102
1.3.6.1.4.1.164.6.1.12.2.13NoderadAmc102c
1.3.6.1.4.1.164.6.1.12.2.14NoderadAce202
1.3.6.1.4.1.164.6.1.12.3NoderadAce
1.3.6.1.4.1.164.6.1.12.3.1NoderadAce101
1.3.6.1.4.1.164.6.1.12.3.2NoderadAce102
1.3.6.1.4.1.164.6.1.12.3.3NoderadAce50
1.3.6.1.4.1.164.6.1.12.3.4NoderadAce52
1.3.6.1.4.1.164.6.1.13NoderadSysLA
1.3.6.1.4.1.164.6.1.13.1NoderadLA140
1.3.6.1.4.1.164.6.1.13.2NoderadLA110
1.3.6.1.4.1.164.6.1.13.3NoderadLA104
1.3.6.1.4.1.164.6.1.100NoderadSysTerminal
1.3.6.1.4.1.164.6.2Nodeagnt
1.3.6.1.4.1.164.6.2.1ScalaragnHwVersionread-writecurrentASCII string for description and display of the agent hardware version, as it is known by the agent software.The user can update the version upon request when …
1.3.6.1.4.1.164.6.2.2ScalaragnTrapMaskread-writecurrentThe value of this attribute determines the type of traps the agent should mask and not send to the management console. The value is differently determined for …
1.3.6.1.4.1.164.6.2.3ScalaragnTrapValueread-onlydeprecatedThe value of the trap decoded in internal RAD format. Full description is given in the Trap definition file
1.3.6.1.4.1.164.6.2.4ScalaragnChangeCntread-onlycurrentThe number of changes in system configuration that were reported to the manager since last cold start
1.3.6.1.4.1.164.6.2.5ScalaragnSpecificread-onlycurrentObject identifier of entity containing additional information regarding this instance.
1.3.6.1.4.1.164.6.2.6ScalaragnConfigMsgread-onlycurrentFull configuration message coded in internal RAD application format. This entry describes agent's configuration. For MP-2200 R3, this object describes agent's …
1.3.6.1.4.1.164.6.2.7TablemngTrapIpTablenot-accessiblecurrentThis table indicates the destination address of the traps. Internally it will be limited to ten addresses.
1.3.6.1.4.1.164.6.2.7.1RowmngEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.7.1.1ColumnmngIDread-onlycurrentThis value indicates an index of a specific IP address
1.3.6.1.4.1.164.6.2.7.1.2ColumnmngIPread-writecurrentThis value indicates the destination address of the traps. IP 0.0.0.0 removes the entry.
1.3.6.1.4.1.164.6.2.7.1.3ColumnmngIPMaskread-writedeprecatedThis value indicates the mask of the destination addresses of the traps.
1.3.6.1.4.1.164.6.2.7.1.4ColumnmngTrapMaskread-writecurrentThe value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different prod…
1.3.6.1.4.1.164.6.2.8ScalaragnIndicationread-onlycurrentAttribute describing the state of the entity the agent is responsible for. In case of a modular entity, the value of this attribute will be according to the co…
1.3.6.1.4.1.164.6.2.9ScalaragnMonitorModeCmdread-writecurrentSetting this attribute to ON, will enforce the agent to change its mode of operation to Monitor Mode
1.3.6.1.4.1.164.6.2.10ScalaragnLedread-onlycurrentThis entry specifies the LEDs status of the agent module . Each led will be represented by 4 bits where the first 2 bits (left) will specify the status : (00=N…
1.3.6.1.4.1.164.6.2.11TabletrapTablenot-accessiblecurrentThis table includes the last few traps generated by the agent, for future retrieval. The table has a limited capacity. If traps are not retrieved in proper tim…
1.3.6.1.4.1.164.6.2.11.1RowtrapEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.11.1.1ColumntrapIDread-onlycurrentThis value indicates an index of a specific trap
1.3.6.1.4.1.164.6.2.11.1.2ColumntrapValread-onlycurrentThis value is the actual ASCII description of the trap.
1.3.6.1.4.1.164.6.2.11.1.3ColumntrapTimeSinceOccurrenceread-onlycurrentThis value indicates the amount of time passed since the occurrence of the event that trigger this trap.
1.3.6.1.4.1.164.6.2.12NodefileTransfer
1.3.6.1.4.1.164.6.2.12.1ScalarfileServerIPread-writecurrentThe IP address of the server from which the file is loaded
1.3.6.1.4.1.164.6.2.12.2ScalarfileNameread-writecurrentThe name of the file to be loaded. For protection, read returns NULL.
1.3.6.1.4.1.164.6.2.12.3ScalarfileTransCmdread-writecurrentThe command to be executed on fileName at fileServerIP.
1.3.6.1.4.1.164.6.2.12.4ScalartftpRetryTimeOutread-writecurrentGeneral Retransmission time-out value (seconds)
1.3.6.1.4.1.164.6.2.12.5ScalartftpTotalTimeOutread-writecurrentTotal Retransmission time-out value (seconds)
1.3.6.1.4.1.164.6.2.12.6ScalartftpStatusread-writecurrentStatus of tftp session. When a session ended with success, the tftpStatus should be endedOk(6). Before restarting a tftp session, the NMS should set the tftpSt…
1.3.6.1.4.1.164.6.2.12.7ScalartftpErrorread-onlycurrentThe MSB represents the standard error code. The LSB represents the private error code. 0x0000 is No Error 0x0100 is File Not Found 0x0400 is Illegal TFTP opera…
1.3.6.1.4.1.164.6.2.12.8ScalarfileTransferToSubSystemsread-writecurrentThis object represents the sub-systems the fileTransCmd refers to. It should be used when a system is divided to sub-systems and each sub-system (or part of th…
1.3.6.1.4.1.164.6.2.12.9ScalarfileNameWithinProductread-writecurrentThe file name used by the product within the product file system.
1.3.6.1.4.1.164.6.2.12.10TableintSwdlTablenot-accessiblecurrentThis parameters table is for internal Software down load. It also includes data about all files contained in the Object from which down-load is performed.
1.3.6.1.4.1.164.6.2.12.10.1RowintSwdlEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.12.10.1.1ColumnintSwdlObjIdxread-onlycurrentThe index of the object from which down-load is performed.
1.3.6.1.4.1.164.6.2.12.10.1.2ColumnintSwdlFileIdxread-onlycurrentThe index of the files included in intSwdlObjIdx. One of these files can be selected to be internally downloaded.
1.3.6.1.4.1.164.6.2.12.10.1.3ColumnintSwdlFileNameread-onlycurrentThe name of the file.
1.3.6.1.4.1.164.6.2.12.10.1.4ColumnintSwdlFileSwVerread-onlycurrentThe software version of the file.
1.3.6.1.4.1.164.6.2.12.10.1.5ColumnintSwdlSwDateread-onlycurrentThe software version date of the file.
1.3.6.1.4.1.164.6.2.12.10.1.6ColumnintSwdlSizeread-onlycurrentThe size of the file.
1.3.6.1.4.1.164.6.2.12.10.1.7ColumnintSwdlCmdread-writecurrentThe command to down-load a SW file to an object. The Agent will change the value of this MIB object to off(2) automatically, after accepting the command.
1.3.6.1.4.1.164.6.2.12.10.1.8ColumnintSwdlToSubSystemread-writecurrentThis object defines the subsystem for download. Bit='1'- APPLY to respective sub system. Bit='0'- DO NOT APPLY to respective sub system. For more details see p…
1.3.6.1.4.1.164.6.2.12.11TableswdlStatusTablenot-accessiblecurrentThis parameters table is for software download status. It also includes data about the files down-loaded or attempted to be down-loaded.
1.3.6.1.4.1.164.6.2.12.11.1RowswdlStatusEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.12.11.1.1ColumnswdlStatusTypeIdxread-onlycurrentThe index of the down-load type (e.g. external (1) or internal (2)).
1.3.6.1.4.1.164.6.2.12.11.1.2ColumnswdlStatusIdxread-onlycurrentThe index of the status rows.
1.3.6.1.4.1.164.6.2.12.11.1.3ColumnswdlStatusFileNameread-onlycurrentThe name of the file.
1.3.6.1.4.1.164.6.2.12.11.1.4ColumnswdlStatusSlotread-onlycurrentThe slot of the updated (or attempted to be updated) object.
1.3.6.1.4.1.164.6.2.12.11.1.5ColumnswdlStatusSubSystemread-onlycurrentThe subsystem that updated (or attempted to be updated).
1.3.6.1.4.1.164.6.2.12.11.1.6ColumnswdlStatusStatusread-onlycurrentThe status of the down load process. Value: Fail (2), OK (3), InProcess (4).
1.3.6.1.4.1.164.6.2.12.11.1.7ColumnswdlStatusTimeread-onlycurrentThis MIB parameter indicates the time SW download was finished. The format shuld be YYYY-MM-DD, hh:mm:ss
1.3.6.1.4.1.164.6.2.12.12ScalarclearDwldStatusLogread-writecurrentThis object clears the status log. Value: off(2), external(3), internal(4) The Agent will change the value of this MIB object to off(2) automatically, after ac…
1.3.6.1.4.1.164.6.2.13ScalarsystemResetread-writecurrentReset action to be performed on the system.
1.3.6.1.4.1.164.6.2.14NodesystemTiming
1.3.6.1.4.1.164.6.2.14.1ScalarsystemDateread-writecurrentSystem date.
1.3.6.1.4.1.164.6.2.14.2ScalarsystemTimeread-writecurrentSystem time.
1.3.6.1.4.1.164.6.2.15NodesystemPort
1.3.6.1.4.1.164.6.2.15.1TablephysicalConnectorTablenot-accessiblecurrentThis table includes the connector type of ports or interfaces.
1.3.6.1.4.1.164.6.2.15.1.1RowphysicalConnectorEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.1.1.1ColumnportIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.1.1.2ColumnphysicalConnectorread-onlycurrentThe connector of the port/interface. other - none of the specified connectors none - no connector.
1.3.6.1.4.1.164.6.2.15.1.1.3ColumnportOptWaveLengthread-onlycurrentWave Length of an Optical interface/port in [nm] and specification if Laser or not. notApplicable - for non-optical ports.
1.3.6.1.4.1.164.6.2.15.1.1.4ColumnportOptModeread-onlycurrentLaser Mode of an Optical Laser interface/port. notApplicable - for non-Laser ports.
1.3.6.1.4.1.164.6.2.15.1.1.5ColumnportBalanceread-writecurrentThis object is according to the port Impedance. For T1 - always balanced. For E1 - there are different impedance values for balanced and unbalanced.
1.3.6.1.4.1.164.6.2.15.2NodeprtSupervisory
1.3.6.1.4.1.164.6.2.15.2.1TableprtSpTablenot-accessiblecurrentA table.
1.3.6.1.4.1.164.6.2.15.2.1.1RowprtSpEntrynot-accessiblecurrentSupervisory port parameter table.
1.3.6.1.4.1.164.6.2.15.2.1.1.1ColumnprtSupervisoryIndexread-onlycurrentThe SP port index. For some products, having modules (cards): The LS byte of the integer is the port index 1..255. The MS byte is different than 0 only if the …
1.3.6.1.4.1.164.6.2.15.2.1.1.2ColumnprtSupervisoryRateread-writecurrentThis attribute indicates the operation rate (speed) of the port. auto - automatic rate selection, by the agent.
1.3.6.1.4.1.164.6.2.15.2.1.1.3ColumnprtSupervisoryDataBitsread-writecurrentThis attribute indicates the number of data bits in an async frame
1.3.6.1.4.1.164.6.2.15.2.1.1.4ColumnprtSupervisoryParityread-writecurrentThis attribute indicates the parity mode in an async frame
1.3.6.1.4.1.164.6.2.15.2.1.1.5ColumnprtSupervisoryStopBitsread-writecurrentThis attribute indicates the parity mode in an async frame.
1.3.6.1.4.1.164.6.2.15.2.1.1.6ColumnprtSupervisoryUsageread-writecurrentThis attribute indicates the usage of the SP port.
1.3.6.1.4.1.164.6.2.15.2.1.1.7ColumnprtSupervisoryInterfaceread-writecurrentThis attribute indicates the supervisory port interface.
1.3.6.1.4.1.164.6.2.15.2.1.1.8ColumnprtSupervisoryCTSread-writecurrentCTS line state.
1.3.6.1.4.1.164.6.2.15.2.1.1.9ColumnprtSupervisoryDcdDelayread-writecurrentDCD delay in msec.
1.3.6.1.4.1.164.6.2.15.2.1.1.10ColumnprtSupervisoryDSRread-writecurrentDSR line state.
1.3.6.1.4.1.164.6.2.15.2.1.1.11ColumnprtSupervisoryRoutProtocolread-writecurrentThis attribute indicates the routing protocol of the port. notApplicable - for DP.
1.3.6.1.4.1.164.6.2.15.3NodeprtPerformance
1.3.6.1.4.1.164.6.2.15.3.1TableprtPerfTablenot-accessiblecurrentThis table includes G.826 ports or interfaces.
1.3.6.1.4.1.164.6.2.15.3.1.1RowprtPerfEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.3.1.1.1ColumnprtPerfIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.3.1.1.2ColumnprtPerfPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last prtPerfSaveAndResetCmd received…
1.3.6.1.4.1.164.6.2.15.3.1.1.3ColumnprtPerfElapsedTimeread-onlycurrentElapsed Time in seconds. - for prtPerfPeriodRef=currentPeriod: The period since last prtPerfSaveAndResetCmd received or since Start-up (if no prtPerfSaveAndRes…
1.3.6.1.4.1.164.6.2.15.3.1.1.4ColumnprtPerfUASread-onlycurrentNumber of Unavailable Seconds for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.5ColumnprtPerfESread-onlycurrentNumber of Errored Seconds for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.6ColumnprtPerfSESread-onlycurrentNumber of Severely Errored Seconds for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.7ColumnprtPerfBBEread-onlycurrentNumber of Background Block (or Frame) Errors for the reference period (prtPerfPeriodRef).
1.3.6.1.4.1.164.6.2.15.3.1.1.8ColumnprtPerfBlocksPerSecread-onlycurrentBlocks per second (or frames per second) of the port/interface indicated by portIdx. This object is constant for a certain port/interface. It is not affected b…
1.3.6.1.4.1.164.6.2.15.3.1.1.9ColumnprtPerfTimeTagread-onlycurrentTime Tag of Last Period: sysUpTime when last prtPerfSaveAndResetCmd was executed. This object is applicable only for prtPerfPeriodRef=lastPeriod. For prtPerfPe…
1.3.6.1.4.1.164.6.2.15.3.1.1.10ColumnprtPerfSaveAndResetCmdread-writecurrentA command per port/interface, to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. This object is applica…
1.3.6.1.4.1.164.6.2.15.4NodeprtTest
1.3.6.1.4.1.164.6.2.15.4.1TableprtTestTablenot-accessiblecurrentThis table includes test data for ports or interfaces.
1.3.6.1.4.1.164.6.2.15.4.1.1RowprtTestEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.4.1.1.1ColumnprtTestIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.4.1.1.2ColumnprtTestCmdAndStatusread-writecurrentSetting this object to a value as detailed further on (except 0) will initiate a test on the specific port. The test/s requested will be set according to the r…
1.3.6.1.4.1.164.6.2.15.4.1.1.3ColumnprtBertCounterread-onlycurrentThis object indicates the number of BERT errors encountered during the BERT operation. It is valid only when BERT (Bit Error Rate Test) is active on the specif…
1.3.6.1.4.1.164.6.2.15.4.1.1.4ColumnprtTestInitiatorread-onlycurrentThis object indicates who initiated this port's test/s.
1.3.6.1.4.1.164.6.2.15.4.1.1.5ColumnprtTestTimeoutread-writecurrentThis object is applicable only when a single test is running. It indicates the test activation timeout in minutes. When the timeout expires, the test is stoppe…
1.3.6.1.4.1.164.6.2.15.5NodeprtParam
1.3.6.1.4.1.164.6.2.15.5.1TableprtParamTablenot-accessiblecurrentThis table includes general port parameters. The meaning is different for every product that supports it due to a general parameter - prtControlCnfg. For ACE20…
1.3.6.1.4.1.164.6.2.15.5.1.1RowprtParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.5.1.1.1ColumnprtParamIdxread-onlycurrentThis object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may…
1.3.6.1.4.1.164.6.2.15.5.1.1.2ColumnprtControlCnfgread-writecurrentThis object may be used for port RW general parameter/s. For detailed meaning, see product's spec. Supported by: PRBi-E3/T3. For ACE2002: This parameter will i…
1.3.6.1.4.1.164.6.2.15.5.1.1.3ColumnprtParamClkSrcread-writecurrentThe source of Transmit Clock. 'loopTiming' or 'loopback' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' or 'internal' …
1.3.6.1.4.1.164.6.2.15.5.1.1.4ColumnprtParamPhantomread-writecurrentPower feeding to another device.
1.3.6.1.4.1.164.6.2.15.5.1.1.5ColumnprtParamResetStatsCmdread-writecurrentReset statistics of the selected port.
1.3.6.1.4.1.164.6.2.15.5.1.1.6ColumnprtParamLastResetStatsTimeread-onlycurrentThe value of MIB II's sysUpTime object at the last time that prtParamResetStatsCmd was Set to on(3) for this port. If prtParamResetStatsCmd was never Set to on…
1.3.6.1.4.1.164.6.2.15.5.1.1.7ColumnprtParamInterfaceTyperead-writecurrentThe type of the port.
1.3.6.1.4.1.164.6.2.15.5.1.1.8ColumnprtParamClearAlarmread-writecurrentSetting this attribute to ON, will enforce a clear operation on the Port Alarms. Upon completion, the value will automatically change to off(2).
1.3.6.1.4.1.164.6.2.15.5.1.1.9ColumnprtParamLedsread-onlycurrentThis entry specifies the LEDs status of the port. Each led is represented by 4 bits where the first 2 bits (left) specify the status : (00=NA, 01=OFF, 10=ON, 1…
1.3.6.1.4.1.164.6.2.15.6NodeprtIP
1.3.6.1.4.1.164.6.2.15.6.1TableprtIpParamTablenot-accessiblecurrentA table - Parameters for IP Ports.
1.3.6.1.4.1.164.6.2.15.6.1.1RowprtIpParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.6.1.1.1ColumnprtIpParamConfigIdxread-onlycurrentThis object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). For products having Agent and Edit configuratio…
1.3.6.1.4.1.164.6.2.15.6.1.1.2ColumnprtIpParamSlotIdxread-onlycurrentThis object indicates a unique number of the slot position in which the module is inserted. notApplicable = 255 (for products that don't have slots). For KM: k…
1.3.6.1.4.1.164.6.2.15.6.1.1.3ColumnprtIpParamIdxread-onlycurrentThis object indicates a unique Port Index.
1.3.6.1.4.1.164.6.2.15.6.1.1.4ColumnprtIpParamHostIPread-writecurrentThe host interface IP address.
1.3.6.1.4.1.164.6.2.15.6.1.1.5ColumnprtIpParamHostMaskread-writecurrentThe host interface subnet mask.
1.3.6.1.4.1.164.6.2.15.6.1.1.6ColumnprtIpParamDefaultGatewayread-writecurrentDefault Gateway's IP Address.
1.3.6.1.4.1.164.6.2.15.6.1.1.7ColumnprtIpParamMediaModeread-onlycurrentThis object indicates the real Media Mode.
1.3.6.1.4.1.164.6.2.15.6.1.1.8ColumnprtIpParamMediaRateread-onlycurrentThis object indicates the real Media Rate (Mbps).
1.3.6.1.4.1.164.6.2.15.6.1.1.9ColumnprtIpParamMngVlanSupportread-writecurrentManagement VLAN support (Tagging). no - No support of VLAN Tagging. yes - 4 VLAN bytes will be added to the frame.
1.3.6.1.4.1.164.6.2.15.6.1.1.10ColumnprtIpParamMngVlanIdread-writecurrentManagement VLAN ID.
1.3.6.1.4.1.164.6.2.15.6.1.1.11ColumnprtIpParamMngVlanPriorityread-writecurrentManagement VLAN Frame priority.
1.3.6.1.4.1.164.6.2.15.6.1.1.12ColumnprtIpParamRingModeread-writecurrentThis object indicates If Ring Mode is enabled or not.
1.3.6.1.4.1.164.6.2.15.6.1.1.13ColumnprtIpParamProtIpEnableread-writecurrentThis object indicates whether a list of Protected IP Addresses is enabled or not. This object is applicable only if prtIpParamRingMode=enable.
1.3.6.1.4.1.164.6.2.15.6.1.1.14ColumnprtIpParamTrafficPriorityread-writecurrentThis object indicates the traffic priority of this port.
1.3.6.1.4.1.164.6.2.15.6.1.1.15ColumnprtIpParamRemoteIPread-writecurrentThis is the IP Address of the remote device that is connected to the current device (Point to Point Application). It is used for sending OAM packets on the LAN…
1.3.6.1.4.1.164.6.2.15.6.1.1.16ColumnprtIpParamMaxTxBandwidthread-writecurrentThis object shows the Max Bandwidth allowed on the LAN. Full - means that a Maximum of 100 Mega Byte Rate may go through the LAN. e1(3) means that the maximum …
1.3.6.1.4.1.164.6.2.15.7NodeprtClkSrc
1.3.6.1.4.1.164.6.2.15.7.1TableprtClkSrcTablenot-accessiblecurrentA table - Parameters for master and fallback clock source of ports .
1.3.6.1.4.1.164.6.2.15.7.1.1RowprtClkSrcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.15.7.1.1.1ColumnprtClkSrcCnfgIdxnot-accessiblecurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.6.2.15.7.1.1.2ColumnprtClkSrcPrtIdxnot-accessiblecurrentThis object indicates a unique Port Index (receiving clock). Refer to device specification for port Index
1.3.6.1.4.1.164.6.2.15.7.1.1.3ColumnprtClkSrcIdxnot-accessiblecurrentAn index in the table. master - refers Master clock parameters fallback - refers Fallback clock parameters
1.3.6.1.4.1.164.6.2.15.7.1.1.4ColumnprtClkSrcModeread-writecurrentThis entry indicates the source the nodal timing is locked to.
1.3.6.1.4.1.164.6.2.15.7.1.1.5ColumnprtClkSrcPrtread-writecurrentThis entry is valid only when working in rxClk mode. It specifies the port from which the clock willl be taken. Refer to device specification for source port I…
1.3.6.1.4.1.164.6.2.16ScalarsystemResetAllStatsCmdread-writecurrentReset statistics of all ports and connections of the device.
1.3.6.1.4.1.164.6.2.17ScalarsystemClearTablesCmdread-writecurrenttempCnfgTables - Set *RowStatus = destroy for all entries of some tables having *RowStatus object, for temporary configuration only! (255). For the relevant ta…
1.3.6.1.4.1.164.6.2.18ScalarsystemParameterread-writecurrentThis parameter can be used for different purposes: - TELNET session time-out in seconds. - Ace20: when trying to create row in a table that already has row wit…
1.3.6.1.4.1.164.6.2.19ScalaragnGlobalAlarmMaskread-writecurrentThe value of this attribute determines the alarm traps the agent should mask and not send to the managers. Each bit from a certain octet represents a certain a…
1.3.6.1.4.1.164.6.2.20ScalaralarmSeverityread-onlycurrentThis object specifies the severity of the alarms.
1.3.6.1.4.1.164.6.2.21ScalaralarmStateread-onlycurrent.
1.3.6.1.4.1.164.6.2.22ScalaragnTestStatusread-onlycurrentIndicates the current test status (for all levels: system, card, port). This attribute will be set to: on(3): when there is at least one test in progress on th…
1.3.6.1.4.1.164.6.2.23ScalarsystemSaveAndResetAllStatsCmdread-writecurrenton - a command to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. off - agent will automatically change…
1.3.6.1.4.1.164.6.2.24ScalarsystemDefaultGatewayread-writecurrentDefault Gateway's IP Address.
1.3.6.1.4.1.164.6.2.25TablesystemPsTablenot-accessiblecurrentThis table describes the PS types of a device. Usage of this table is specified in the device's NMS SRS
1.3.6.1.4.1.164.6.2.25.1RowsystemPsEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.25.1.1ColumnsystemPsIndex1read-onlycurrentFirst Index. In HUBs: 1 = PS-A slot 2 = PS-B slot. In SA units: 1 = PS1 2 = PS2 Default = 1
1.3.6.1.4.1.164.6.2.25.1.2ColumnsystemPsIndex2read-onlycurrentSecond Index. In HUBs: 1 always. In SA units: 1 = Local 2 = Remote Default = 1.
1.3.6.1.4.1.164.6.2.25.1.3ColumnsystemPsTyperead-onlycurrentThe type of PS, for a stand-alone product. acDc - AC with rj45 DC. acPF - Power Feeding (phantom) box that is feeding another box by external AC. dcPF - Power …
1.3.6.1.4.1.164.6.2.25.1.4ColumnsystemPsStatusread-onlycurrentThe Status of the PS unit.
1.3.6.1.4.1.164.6.2.25.1.5ColumnsystemPsHotSwapread-onlycurrentIs PS unit hot swap or fixed.
1.3.6.1.4.1.164.6.2.26ScalaragnFansread-onlycurrentThis entry specifies the FANs existence and status. Each fan will be represented by 2 bits, where the first bit (right) will specify the existence: (0= Not exi…
1.3.6.1.4.1.164.6.2.27ScalaragnSendTrapParameterread-writecurrentThis object specifies if the agent will attach a specific parameter to a trap. For ACE2002 the agent will attach or not the openViewSeverity parameter accordin…
1.3.6.1.4.1.164.6.2.28ScalaragnSensorsStatusread-onlycurrentThis entry specifies the Sensors (Temperature sensors or others) existence and status. Each sensor will be represented by 2 bits, where the first bit (right) w…
1.3.6.1.4.1.164.6.2.29ScalaragnStationClockCardread-onlycurrentThis entry specifies the station clock card existence and status. notExist - station clock card (piggy) does not exist. notValid - station clock card exists bu…
1.3.6.1.4.1.164.6.2.30ScalarxcIndexNextread-onlycurrentThis object contains an appropriate value to be used for xcIndex when creating entries in the xcTable. The value 0 indicates that no unassigned entries are ava…
1.3.6.1.4.1.164.6.2.31TablexcTablenot-accessiblecurrentConfiguration of system cross-connect entries. The table follows the behavior described in RFC 2515, RFC 1604 regarding the creation deletion and modification …
1.3.6.1.4.1.164.6.2.31.1RowxcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.31.1.1ColumnxcIndexnot-accessiblecurrentCross Connect Identifier.
1.3.6.1.4.1.164.6.2.31.1.2ColumnxcIfIndex1not-accessiblecurrentThe interface Index from the ifTable, which identify one side of the connection.
1.3.6.1.4.1.164.6.2.31.1.3ColumnxcVpinot-accessiblecurrentThe VPI value.
1.3.6.1.4.1.164.6.2.31.1.4ColumnxcVcinot-accessiblecurrentThe VCI value.
1.3.6.1.4.1.164.6.2.31.1.5ColumnxcIfIndex2not-accessiblecurrentThe interface Index from the ifTable, which identifies the other side of the connection.
1.3.6.1.4.1.164.6.2.31.1.6ColumnxcRowStatusread-createcurrentThis parameter allows NMS to create/delete entries of this table.
1.3.6.1.4.1.164.6.2.31.1.7ColumnxcDescrread-createcurrentA textual string containing information about the xc entry.
1.3.6.1.4.1.164.6.2.31.1.8ColumnxcAdminStatusread-createcurrentThe desired administrative status of this bi-directional cross-connect.
1.3.6.1.4.1.164.6.2.31.1.9ColumnxcOperStatusread-onlycurrentThe operational status of this bi-directional cross-connect.
1.3.6.1.4.1.164.6.2.31.1.10ColumnxcAttachedIfTyperead-onlycurrentThis object indicates if the specific VCC is already attached to any interface, and indicates the type of the interface. This object's purpose is to ease the c…
1.3.6.1.4.1.164.6.2.31.1.11ColumnxcInputPriorityread-createcurrentThis object is the priority, by which the LAN frames will be internaly sent to the ATM HW. This parameter is applicable if atmNteMdlInputPriorityMechanism=enab…
1.3.6.1.4.1.164.6.2.31.1.12ColumnxcBitMappingread-onlycurrentThis object maps this entry to a bit of an octet string. For ACE2002 this object maps the LAN VCC to the bit of the VLAN Port Lists. If the value is '0' then i…
1.3.6.1.4.1.164.6.2.32NodesystemModule
1.3.6.1.4.1.164.6.2.32.1NodemodlParam
1.3.6.1.4.1.164.6.2.32.1.1TablemodlParamTablenot-accessiblecurrentThis table include parameters for system modules.
1.3.6.1.4.1.164.6.2.32.1.1.1RowmodlParamEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.6.2.32.1.1.1.1ColumnmodlParamIndexread-onlycurrentThe module index. The index can be the slot number or any other module index as described in the specifications of the device. For Vmux-2100 device, the index …
1.3.6.1.4.1.164.6.2.32.1.1.1.2ColumnmodlParamResetread-writecurrentReset action to be performed on the module. Set the parameter will be done always to on(3) or factory (4). After performing the Reset operation, Agent will aut…
1.3.6.1.4.1.164.6.2.32.1.1.1.3ColumnmodlParamSwdlStatusread-onlycurrentThis parameter indicates whatever the swdl is in process or not.
1.3.6.1.4.1.164.6.2.32.1.1.1.4ColumnmodlParamLedsread-onlycurrentThis entry specifies the LEDs status of the module. Each led is represented by 4 bits where the first 2 bits (left) specify the status : (00=NA, 01=OFF, 10=ON,…
1.3.6.1.4.1.164.6.2.33ScalaragnNearFarConnectionread-onlycurrentThis parameter describes the connection between near-end and far-end agents.
1.3.6.1.4.1.164.6.2.34NodeagnAccess
1.3.6.1.4.1.164.6.2.34.1ScalaragnTelnetAccessread-writecurrentEnable/Disable accessing the device via Telnet. disable - no one will be allowed to access the device via Telnet. enable - all users are allowed Telnet Access.…
1.3.6.1.4.1.164.6.2.34.2ScalaragnWebAccessread-writecurrentEnable/Disable accessing the device via Web. disable - no one will be allowed to access the device via Web. enable - all users are allowed Web Access. managers…
1.3.6.1.4.1.164.6.2.35NodesystemInterface
1.3.6.1.4.1.164.6.2.35.1TableifCreateTablenot-accessiblecurrentThe Interface Configuration Table. This table enables to create inferfaces of Entities.
1.3.6.1.4.1.164.6.2.35.1.1RowifCreateEntrynot-accessiblecurrentAn entry in the Interface Configuration table.
1.3.6.1.4.1.164.6.2.35.1.1.1ColumnifCreateEntityTyperead-onlycurrentThis object indicates the Entity Type.
1.3.6.1.4.1.164.6.2.35.1.1.2ColumnifCreateEntityIdxread-onlycurrentThis object indicates the Entity Index.
1.3.6.1.4.1.164.6.2.35.1.1.3ColumnifCreateNumberread-onlycurrentThis object indicates the Interface Number.
1.3.6.1.4.1.164.6.2.35.1.1.4ColumnifCreateRowStatusread-createcurrentThis object enables the user to create/delete entries in this table.
1.3.6.1.4.1.164.6.2.35.1.1.5ColumnifCreateTyperead-createcurrentThis object indicates the Interface Type.
1.3.6.1.4.1.164.6.2.35.1.1.6ColumnifCreateIndexread-onlycurrentThis object indicates the ifIndex of the created Interface.
1.3.6.1.4.1.164.6.2.36NodesystemOam
1.3.6.1.4.1.164.6.2.36.1TablesystemOamTablenot-accessiblecurrentThe OAM Configuration Table.
1.3.6.1.4.1.164.6.2.36.1.1RowsystemOamEntrynot-accessiblecurrentAn entry in the OAM table.
1.3.6.1.4.1.164.6.2.36.1.1.1ColumnsystemOamCnfgIdxnot-accessiblecurrentThis attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.
1.3.6.1.4.1.164.6.2.36.1.1.2ColumnsystemOamFrequencyread-writecurrentTime in sec. between 2 OAM packets.
1.3.6.1.4.1.164.6.2.36.1.1.3ColumnsystemOamTimeoutCyclesread-writecurrentNo. of cycles the agent will send OAM packets without receiving a response from the remote device before declaring that the connection to the remote side is do…
1.3.6.1.4.1.164.6.2.38TablebitMappingTablenot-accessiblecurrentThis table maps bits of an octet string to an interface. For ACE-2002 this table is used to map bits of VLAN port lists to LAN VCC's. This table is the opposit…
1.3.6.1.4.1.164.6.2.38.1RowbitMappingEntrynot-accessiblecurrentEach entry in the table describes a correlation of a bit location to an interface. For ACE-2002 - Upon creation of a new LAN VCC the agent will add an entry to…
1.3.6.1.4.1.164.6.2.38.1.1ColumnbitMappingLocationnot-accessiblecurrentThe bit location in an octet string.
1.3.6.1.4.1.164.6.2.38.1.2ColumnbitMappingIndexread-onlycurrentThe interface index or any other index that should be mapped.
1.3.6.1.4.1.164.6.2.39ScalarbitMappingViewread-onlycurrentA view of the bitMappingTable in one object - each entry in the biMappingTable will have the corresponding Bit of this object (bitMappingLocation) = '1'. For A…
1.3.6.1.4.1.164.7NoderadStkHub
1.3.6.1.4.1.164.11NoderadRouter
1.3.6.1.4.1.164.11.1NodertrInterfaces
1.3.6.1.4.1.164.11.1.1TablertrConfigIfTablenot-accessiblecurrentTable of configured interfaces.
1.3.6.1.4.1.164.11.1.1.1RowrtrConfigIfEntrynot-accessiblecurrentEach entry defines a configured interface.
1.3.6.1.4.1.164.11.1.1.1.1ColumnrtrConfigIfIndexread-onlycurrentThis variable uniquely identifies the interface. It is used as a cross reference in other system tables
1.3.6.1.4.1.164.11.1.1.1.2ColumnrtrConfigIfTyperead-createcurrentThis variable identifies the type of the specific entry in the rtrDynamicIfConfigTable. This field is writable only at creation time (i.e., when value of statu…
1.3.6.1.4.1.164.11.1.1.1.3ColumnrtrConfigIfNameread-createcurrentThis variable provides a logical name to a specific entry in rtrConfigIfTable. It is also used in identifying the Driver interfaces.
1.3.6.1.4.1.164.11.1.1.1.4ColumnrtrConfigIfStatusread-createcurrentThe status of the ConfigEntry. The choices are those defined in SNMPv2-TC. Only: active, createAndWait, and destroy will be used. active - The conceptual row i…
1.3.6.1.4.1.164.11.1.2TablertrIfCfgTablenot-accessiblecurrentRouter Interface Configuration Table.
1.3.6.1.4.1.164.11.1.2.1RowrtrIfCfgEntrynot-accessiblecurrentAn entry in the Router Interface Configuration Table.
1.3.6.1.4.1.164.11.1.2.1.1ColumnrtrIfCfgIndexread-createcurrentThis object indicates the Router Interface Index. (In some cases it will be equal to the Router Interface ifIndex).
1.3.6.1.4.1.164.11.1.2.1.2ColumnrtrIfCfgIpAddressread-createcurrentIP Address of the Router Interface.
1.3.6.1.4.1.164.11.1.2.1.3ColumnrtrIfCfgRowStatusread-createcurrentThis object enables the user to create/delete entries of this table.
1.3.6.1.4.1.164.11.1.2.1.4ColumnrtrIfCfgIpMaskread-createcurrentIP Mask Address Router Interface.
1.3.6.1.4.1.164.11.1.2.1.5ColumnrtrIfCfgIfIndexread-createcurrentifIndex of the device interface connected to this Router Interface.
1.3.6.1.4.1.164.11.1.2.1.6ColumnrtrIfCfgTyperead-createcurrentThe Router Interface Type. atm - ATM router interface lis - Logical IP Subnet router interface. ethernet - Ethernet router interface.
1.3.6.1.4.1.164.11.1.2.1.7ColumnrtrIfCfgVlanIdread-createcurrentThe VLAN ID assigned to Tagged frames transmitted from this Router Interface. The value inserted should be a defined VLAN.
1.3.6.1.4.1.164.11.2NodeipSpec
1.3.6.1.4.1.164.11.2.1TablertrIpAddrTablenot-accessiblecurrentThis table is parralel to MIB II IpAddrTable, and is used to add/delete entries to/from that table. In addition it contains private objects.
1.3.6.1.4.1.164.11.2.1.1RowrtrIpAddrEntrynot-accessiblecurrentThe addressing information for one of this entity's IP addresses.
1.3.6.1.4.1.164.11.2.1.1.1ColumnrtrIpAdEntAddrread-onlycurrentThe IP address to which this entry's addressing information pertains.
1.3.6.1.4.1.164.11.2.1.1.2ColumnrtrIpAdEntIfIndexread-createcurrentThe index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the …
1.3.6.1.4.1.164.11.2.1.1.3ColumnrtrIpAdEntNetMaskread-createcurrentThe subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits …
1.3.6.1.4.1.164.11.2.1.1.4ColumnrtrIpAdEntForwardIpBroadcastread-createcurrentThis variable controls forwarding of IP (sub)net-directed broadcasts destined for an attached sub(net).
1.3.6.1.4.1.164.11.2.1.1.5ColumnrtrIpAdEntBackupAddrread-createcurrent
1.3.6.1.4.1.164.11.2.1.1.6ColumnrtrIpAdEntStatusread-createcurrentThe Status variable is used to create and destroy a Ip Addresses.
1.3.6.1.4.1.164.11.2.2NodeicmpSpec
1.3.6.1.4.1.164.11.2.2.1ScalarrtrIcmpGenErrMsgEnableread-writecurrentThis variable controlls the ability to generate ICMP error messages
1.3.6.1.4.1.164.11.2.2.2TablertrIcmpRdTablenot-accessiblecurrentThis table contains ICMP Router Discovery parameters configurated per IP interface.
1.3.6.1.4.1.164.11.2.2.2.1RowrtrIcmpRdEntrynot-accessiblecurrentThe ICMP parameters configurated for IP interface.
1.3.6.1.4.1.164.11.2.2.2.1.1ColumnrtrIcmpRdIpAddrread-onlycurrentThe IP address to which this entry's information pertains.
1.3.6.1.4.1.164.11.2.2.2.1.2ColumnrtrIcmpRdIpAdvertAddrread-writecurrentThe IP destination address to be used for multicast Router Advertisements sent from the interface. The only permissible values are the all-systems multicast ad…
1.3.6.1.4.1.164.11.2.2.2.1.3ColumnrtrIcmpRdMaxAdvertIntervalread-writecurrentThe maximum time allowed between sending multicast Router Advertisements from the interface, in seconds. Must be no less than 4 seconds and no greater than 180…
1.3.6.1.4.1.164.11.2.2.2.1.4ColumnrtrIcmpRdMinAdvertIntervalread-writecurrentThe minimum time allowed between sending unsolicited multicast Router Advertisements from the interface, in seconds. Must be no less than 3 seconds and no grea…
1.3.6.1.4.1.164.11.2.2.2.1.5ColumnrtrIcmpRdAdvertLifetimeread-writecurrentThe maximum length of time that the advertised addresses are to be considered as valid. Must be no less than rtrIcmpRdMaxAdvertInterval and no greater than 900…
1.3.6.1.4.1.164.11.2.2.2.1.6ColumnrtrIcmpRdAdvertiseread-writecurrentA flag indicating whether or not the address is to be advertised.
1.3.6.1.4.1.164.11.2.2.2.1.7ColumnrtrIcmpRdPreferenceLevelread-writecurrentThe preferability of the address as a default router address, relative to other router addresses on the same subnet.
1.3.6.1.4.1.164.11.2.2.2.1.8ColumnrtrIcmpRdEntStatusread-writecurrentSetting of any value to this object set values of all fields to the default values.
1.3.6.1.4.1.164.11.2.3Noderip2Spec
1.3.6.1.4.1.164.11.2.3.1TablertrRip2IfConfTablenot-accessiblecurrentThis table is an extension of rip2IfConfTable (RFC 1724 ,RIP 2). It means that every time somebody creates/destroys a row in the rip2IfConfTable, the same row …
1.3.6.1.4.1.164.11.2.3.1.1RowrtrRip2IfConfEntrynot-accessiblecurrentAn entry in table rtrRip2IfConfTable.
1.3.6.1.4.1.164.11.2.3.1.1.1ColumnrtrRip2IfConfAddressread-onlycurrentThe IP Address of this system on the indicated subnet.
1.3.6.1.4.1.164.11.2.3.1.1.2ColumnrtrRip2IfConfVirtualDisread-writedeprecatedThis variable defines the virtual number of hops assigned to the interface specified by rtrIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm.
1.3.6.1.4.1.164.11.2.3.1.1.3ColumnrtrRip2IfConfAutoSendread-writedeprecatedWhen set to enable only the default route is sent through the interface. When set to disable, regular RIPs are sent.
1.3.6.1.4.1.164.11.2.4NodearpSpec
1.3.6.1.4.1.164.11.2.4.1ScalarrtrArpDeleteTableread-writecurrentSetting this object to any not-null value has the effect of deleting all entries of the ARP table.
1.3.6.1.4.1.164.11.2.4.2ScalarrtrArpInactiveTimeOutread-writecurrentThis variable defines the maximum time period (in second) that can pass between ARP requests concerning an entry in the ARP table. After this time period, the …
1.3.6.1.4.1.164.11.2.4.3ScalarrtrArpProxyread-writecurrentWhen ARP Proxy is enabled, the router can respond to ARP requests for nodes located on a different sub-net, provided they are it its network table. The router …
1.3.6.1.4.1.164.11.2.5NodertrNat
1.3.6.1.4.1.164.11.2.5.1TablertrNatIfConfTablenot-accessiblecurrentA list of interfaces which require separate NAT configuration.
1.3.6.1.4.1.164.11.2.5.1.1RowrtrNatIfConfEntrynot-accessiblecurrentA single routing domain in a single subnet.
1.3.6.1.4.1.164.11.2.5.1.1.1ColumnrtrNatIfVirtualAddressread-onlycurrentThe IP Address of the virtual subnet to be translated by the 'NAT box' attached to this interface.
1.3.6.1.4.1.164.11.2.5.1.1.2ColumnrtrNatIfVirtualMaskread-onlycurrentThe subnet Mask of the virtual subnet.
1.3.6.1.4.1.164.11.2.5.1.1.3ColumnrtrNatIfConfStatusread-createcurrentWriting 'destroy' has the effect of deleting this interface.
1.3.6.1.4.1.164.11.2.5.1.1.4ColumnrtrNatIfRealAddressread-createcurrentThe IP Address of the real subnet which is used by 'NAT box' for translation.
1.3.6.1.4.1.164.11.2.5.1.1.5ColumnrtrNatIfRealMaskread-createcurrentThe subnet Mask of the real subnet.
1.3.6.1.4.1.164.11.2.5.1.1.6ColumnrtrNatIfTyperead-createcurrentNAT type. static - Translate a specific virtual IP network to a specific real IP network. TCP, UDP and ICMP sessions originated both in real and virtual networ…
1.3.6.1.4.1.164.11.2.5.2TablertrPatTablenot-accessiblecurrentPort Address Translation (PAT - single IP NAT) configuration Table.
1.3.6.1.4.1.164.11.2.5.2.1RowrtrPatEntrynot-accessiblecurrentEach entry describe unique mapping between real IP address, range of ports and protocol, to local (virtual) IP address. Ports are used in the TCP (rfc793) to n…
1.3.6.1.4.1.164.11.2.5.2.1.1ColumnrtrPatIdxread-onlycurrentRunning index for PAT table.
1.3.6.1.4.1.164.11.2.5.2.1.2ColumnrtrPatRealAddressread-createcurrentThe real IP Address used for translation
1.3.6.1.4.1.164.11.2.5.2.1.3ColumnrtrPatVirtualAddressread-createcurrentThe virtual IP Address used for translation
1.3.6.1.4.1.164.11.2.5.2.1.4ColumnrtrPatLowestPortread-createcurrentLowest Port number for this PAT entry
1.3.6.1.4.1.164.11.2.5.2.1.5ColumnrtrPatHighestPortread-createcurrentHighest Port number for this PAT entry
1.3.6.1.4.1.164.11.2.5.2.1.6ColumnrtrPatProtocolread-createcurrentProtocol selected. This Protocol and port range (lowest port - highest port) define the application (FTP, Telnet, SMTP etc.). Protocol enumaration numbers corr…
1.3.6.1.4.1.164.11.2.5.2.1.7ColumnrtrPatStatusread-createcurrentThis object enables creating and deleting entries of the table.
1.3.6.1.4.1.164.11.5NodertrFACS
1.3.6.1.4.1.164.11.5.1ScalarrtrFACSDefaultActionread-writecurrentUsed to define the default action for the device, when no FACS statements applicable to a given frame are defined.
1.3.6.1.4.1.164.11.5.2TablertrFACSActTablenot-accessiblecurrentThe table of FACS action.
1.3.6.1.4.1.164.11.5.2.1RowrtrFACSActEntrynot-accessiblecurrentEach rtrFACSActEntry consist of the following parameters
1.3.6.1.4.1.164.11.5.2.1.1ColumnrtrFACSActTyperead-onlycurrentThis parameter indicates on which FACS Table the FACS action will preform.
1.3.6.1.4.1.164.11.5.2.1.2ColumnrtrFACSActIfIndexread-onlycurrentThe interface to which this FACS entry is applicable.
1.3.6.1.4.1.164.11.5.2.1.3ColumnrtrFACSActionread-writecurrentThe management station that sends a SET request for one of these actions with indexes rtrFACSType and rtrFACSIfIndex defines the type and the interface Id for …
1.3.6.1.4.1.164.11.5.2.1.4ColumnrtrFACSActiveDBread-writecurrentThis parameter will point on which Facs DataBase the SNMP agent read. The Active dataBase is Read Only. The user may change FACS statements in the temporary Da…
1.3.6.1.4.1.164.11.5.3TablertrFACSTablenot-accessiblecurrentThe table of FACS statment.
1.3.6.1.4.1.164.11.5.3.1RowrtrFACSEntrynot-accessiblecurrentEach FACS statment consists of the following parameters
1.3.6.1.4.1.164.11.5.3.1.1ColumnrtrFACSIfIndexread-onlycurrentThe interface to which this FACS entry is applicable. For applications this variables is always 0.
1.3.6.1.4.1.164.11.5.3.1.2ColumnrtrFACSProtocolTyperead-onlycurrentThis parameter define the protocol the Security Access Control is applicable.
1.3.6.1.4.1.164.11.5.3.1.3ColumnrtrFACSTyperead-onlycurrentThe Mode of in which this FACS statement operates. For applications this variable is always rx(2).
1.3.6.1.4.1.164.11.5.3.1.4ColumnrtrFACSIndexread-onlycurrentIndex to the FACS Table.
1.3.6.1.4.1.164.11.5.3.1.5ColumnrtrFACSSrcAddread-writecurrentThe size of the octet string will be according to the protocol type defined in rtrFACSProtocolType.
1.3.6.1.4.1.164.11.5.3.1.6ColumnrtrFACSSrcAddMaskread-writecurrentSource-address mask .
1.3.6.1.4.1.164.11.5.3.1.7ColumnrtrFACSDesAddread-writecurrentDestination-address The size of the octet string will be according to the protocol type define in rtrFACSProtocolType .
1.3.6.1.4.1.164.11.5.3.1.8ColumnrtrFACSDesAddMaskread-writecurrentDestination-address mask .
1.3.6.1.4.1.164.11.5.3.1.9ColumnrtrFACSOperationread-writecurrent... .
1.3.6.1.4.1.164.11.5.3.1.10ColumnrtrFACSNetFilteringread-writecurrent... .
1.3.6.1.4.1.164.11.5.3.1.11ColumnrtrFACSSocketNumread-writecurrentPort/socket number for different applications 0 is default meaning not applicable. none(1), ftp(21), telnet(23), smtp(25), tftp(69), snmp(161), snmpTrap(162), …
1.3.6.1.4.1.164.11.5.3.1.12ColumnrtrFACSMask1Idread-writecurrentIndex into RND mask table FACS/COD Type) .
1.3.6.1.4.1.164.11.5.3.1.13ColumnrtrFACSMask2Idread-writecurrentIndex into RND mask table FACS/COD according to the value of rtrFACSType .
1.3.6.1.4.1.164.11.5.3.1.14ColumnrtrFACSStatusread-writecurrentThe status of a table entry.
1.3.6.1.4.1.164.11.5.4ScalarrtrFACSFrameDataread-onlycurrentData from the frame that violated a FACS Filter.
1.3.6.1.4.1.164.11.7NodertrBridge
1.3.6.1.4.1.164.11.7.1TablertrBridgePortConfigTablenot-accessiblecurrentTable of the bridge ports
1.3.6.1.4.1.164.11.7.1.1RowrtrBridgePortConfigEntrynot-accessiblecurrentEach entry defines a bridge port
1.3.6.1.4.1.164.11.7.1.1.1ColumnrtrBridgePortCIndexread-onlycurrentThis is the index of the bridge port. It is the same as 'dot1dBasePort' of the Bridge MIB.
1.3.6.1.4.1.164.11.7.1.1.2ColumnrtrBridgePortCIfread-createcurrentThe config ifIndex the bridge port is sitting on.
1.3.6.1.4.1.164.11.7.1.1.3ColumnrtrBridgePortCStatusread-createcurrentThe status of the RtrBridgePortConfigEntry. Creating and destroying the bridge port is done by this variable.
1.3.6.1.4.1.164.11.7.3NodeipRouter
1.3.6.1.4.1.164.11.7.3.1TablertrIfIpTablenot-accessiblecurrentRouter interfaces table.
1.3.6.1.4.1.164.11.7.3.1.1RowrtrIfIpEntrynot-accessiblecurrentAn entry in table rtrIfIpTable.
1.3.6.1.4.1.164.11.7.3.1.1.1ColumnrtrIfIpread-createcurrentIP Address.
1.3.6.1.4.1.164.11.7.3.1.1.2ColumnrtrIfRowStatusread-createcurrent.
1.3.6.1.4.1.164.11.7.3.1.1.3ColumnrtrIfIpMaskread-createcurrentIP mask Address.
1.3.6.1.4.1.164.11.7.3.1.1.4ColumnrtrIfIndexread-createcurrentThe ifIndex connection, on which the IP is determined.
1.3.6.1.4.1.164.11.7.3.1.1.5ColumnrtrIfMngread-createcurrentAn IP interface might be determined as a management connection (under the product limitations).
1.3.6.1.4.1.164.11.7.3.1.1.6ColumnrtrIfVlanIdread-createcurrentThe VLAN ID assigned to Tagged frames transmitted from this port. The value inserted should be a defined VLAN.
1.3.6.1.4.1.164.11.7.3.2TablebrtrIfTablenot-accessiblecurrentLAN interface table.
1.3.6.1.4.1.164.11.7.3.2.1RowbrtrIfEntrynot-accessiblecurrentThe entries of this table will be created by agent.
1.3.6.1.4.1.164.11.7.3.2.1.1ColumnbrtrIfIndexread-onlycurrentThe index of the interface (LAN or ATM).
1.3.6.1.4.1.164.11.7.3.2.1.2ColumnbrtrIfModeread-writecurrentConnection Mode.
1.3.6.1.4.1.164.11.7.3.2.1.3ColumnbrtrIfMaxFrameSizeread-writecurrentFrame Max Size.
1.3.6.1.4.1.164.11.7.3.3ScalarrtrArpAgingTimeread-writecurrentARP Aging Time. Applicable for a Router Mode and for a Brouter Mode.
1.3.6.1.4.1.164.11.7.3.4TablebrtrLanIfTablenot-accessiblecurrentLAN interface table.
1.3.6.1.4.1.164.11.7.3.4.1RowbrtrLanIfEntrynot-accessiblecurrentThe entries of this table will be created by agent .
1.3.6.1.4.1.164.11.7.3.4.1.1ColumnbrtrLanIfIndexread-onlycurrentThe index of the LAN entity (physical interface).
1.3.6.1.4.1.164.11.7.3.4.1.2ColumnbrtrLanIpAddressread-writecurrentHost IP address. Applicable for bridge mode connection only.
1.3.6.1.4.1.164.11.7.3.4.1.3ColumnbrtrLanIpMaskread-writecurrentHost IP Mask. Applicable for bridge mode connection only.
1.3.6.1.4.1.164.11.7.3.4.1.4ColumnbrtrLanMaxRateEnableread-onlycurrentThis parameter determines the HW ability of the LAN card according to HW.
1.3.6.1.4.1.164.11.7.3.4.1.5ColumnbrtrLanMaxRateread-writecurrentMax Rate.
1.3.6.1.4.1.164.11.7.3.4.1.6ColumnbrtrLanMngread-writecurrentAn IP interface might be determined as a management connection (under the product limitations).
1.3.6.1.4.1.164.11.7.3.4.1.7ColumnbrtrLanDefaultRouterread-writecurrentDefault Router's (Gateway's) IP Address. For each LAN interface there may be a different Default Router.
1.3.6.1.4.1.164.11.7.3.5TablertrIsdnIfTablenot-accessiblecurrentThis table contains ISDN parameters that do not appear in the standard MIBs.
1.3.6.1.4.1.164.11.7.3.5.1RowrtrIsdnIfEntrynot-accessiblecurrentEntries for ISDN parameters that do not appear in the standard MIBs.
1.3.6.1.4.1.164.11.7.3.5.1.1ColumnrtrIsdnIfMinNumBchansread-createcurrentMinimum number of B channels that the ISDN Dialer of the router will use for Dialing out. This parameter will be used for the BOD (Bandwidth On Demand) feature…
1.3.6.1.4.1.164.11.7.3.5.1.2ColumnrtrIsdnIfMaxNumBchansread-createcurrentMaximum number of B channels that the ISDN Dialer of the router will use for Dialing out. This parameter will be used for the BOD (Bandwidth On Demand) feature…
1.3.6.1.4.1.164.11.7.3.6TablertrLcrTablenot-accessiblecurrentLeast Cost Routing Table. The user will be able to set a prefix for an outgoing number that arrives with a predefined prefix in order to redirect the number fo…
1.3.6.1.4.1.164.11.7.3.6.1RowrtrLcrEntrynot-accessiblecurrentLeast Cost Routing Entry.
1.3.6.1.4.1.164.11.7.3.6.1.1ColumnrtrLcrOutIfIndexnot-accessiblecurrentThe outgoing interface Number of the current route. The incoming interface number is the value of ifIndex.
1.3.6.1.4.1.164.11.7.3.6.1.2ColumnrtrLcrRowStatusread-createcurrentRow Status for adding/destroying rows.
1.3.6.1.4.1.164.11.7.3.6.1.3ColumnrtrLcrInPrefixread-createcurrentThis prefix is part of the called number existing in the incoming packet.
1.3.6.1.4.1.164.11.7.3.6.1.4ColumnrtrLcrOutPrefixread-createcurrentThis prefix will be inserted into the outgoing packet.
1.3.6.1.4.1.164.11.8NodemulticastGen
1.3.6.1.4.1.164.11.8.1ScalarmulticastModeread-writecurrentAccording to this mode the packets will be forwarded. If disable (2) is selected, there will be no multicast.
1.3.6.1.4.1.164.11.9NoderadRouterConfig
1.3.6.1.4.1.164.11.9.1TablertrConfigTablenot-accessiblecurrentThe Router's Configuration table.
1.3.6.1.4.1.164.11.9.1.1RowrtrConfigEntrynot-accessiblecurrentAn entry in the Router's Configuration table.
1.3.6.1.4.1.164.11.9.1.1.1ColumnrtrConfigIndexread-onlycurrentThis object indicates the Router's Index.
1.3.6.1.4.1.164.11.9.1.1.3ColumnrtrConfigArpAgingTimeread-writecurrentARP Aging Time.
1.3.6.1.4.1.164.11.9.1.1.5ColumnrtrConfigClassifierTosMaskread-writecurrentThis object indicates the Classifier's TOS Mask, as follows: 0x1C for DTR 0x1E for Cisco 0xE0 for Precedence 0xFC for Diffserv Else for Manual .
1.3.6.1.4.1.164.11.9.3TablertrFwdTablenot-accessiblecurrentThe Router's Forwarding Table.
1.3.6.1.4.1.164.11.9.3.1RowrtrFwdEntrynot-accessiblecurrentAn entry in the Router's Forwarding table.
1.3.6.1.4.1.164.11.9.3.1.1ColumnrtrFwdIdxread-onlycurrentThis object indicates the Router Index.
1.3.6.1.4.1.164.11.9.3.1.2ColumnrtrFwdIpAddressread-onlycurrentThis object indicates the Destination IP Address.
1.3.6.1.4.1.164.11.9.3.1.3ColumnrtrFwdIpMaskread-onlycurrentThis object indicates the Mask IP address.
1.3.6.1.4.1.164.11.9.3.1.4ColumnrtrFwdRuleIdxread-onlycurrentThis object indicates the Rule's Number.
1.3.6.1.4.1.164.11.9.3.1.5ColumnrtrFwdRowStatusread-createcurrentThis object enables the user to create/delete entries in this table. Entry of Type rtrFwdType = staticRouting(3) are created by the user. Only this type of ent…
1.3.6.1.4.1.164.11.9.3.1.6ColumnrtrFwdNextHopread-createcurrentThis object indicates the IP Address of the Next Hop.
1.3.6.1.4.1.164.11.9.3.1.7ColumnrtrFwdIfIndexread-onlycurrentThis object indicates the Interface Index.
1.3.6.1.4.1.164.11.9.3.1.8ColumnrtrFwdTyperead-createcurrentThe type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is …
1.3.6.1.4.1.164.11.9.3.1.9ColumnrtrFwdProtoread-onlycurrentThe routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th…
1.3.6.1.4.1.164.11.9.3.1.10ColumnrtrFwdEthQueueread-createcurrentThis object indicates the ETH Queue number.
1.3.6.1.4.1.164.11.9.3.1.11ColumnrtrFwdMetric1read-createcurrentThe primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's rtrFwdProto value. If t…
1.3.6.1.4.1.164.12NoderadAtm
1.3.6.1.4.1.164.12.2NodeatmGen
1.3.6.1.4.1.164.12.2.1NodeatmPerfHistory
1.3.6.1.4.1.164.12.2.1.1NodeatmIfPerformance
1.3.6.1.4.1.164.12.2.1.1.1TableatmIfDataTablenot-accessiblecurrentThe ATM interface Data table.
1.3.6.1.4.1.164.12.2.1.1.1.1RowatmIfDataEntrynot-accessiblecurrentAn entry in the ATM interface Data table.
1.3.6.1.4.1.164.12.2.1.1.1.1.1ColumnatmIfTimeElapsedread-onlycurrentThe number of seconds that have elapsed since the beginning of the near end current error- measurement period.
1.3.6.1.4.1.164.12.2.1.1.1.1.2ColumnatmIfValidIntervalsread-onlycurrentThe number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 h…
1.3.6.1.4.1.164.12.2.1.1.2TableatmIfCurrentTablenot-accessiblecurrentThe ATM interface Current table.
1.3.6.1.4.1.164.12.2.1.1.2.1RowatmIfCurrentEntrynot-accessiblecurrentAn entry in the ATM interface Current table.
1.3.6.1.4.1.164.12.2.1.1.2.1.1ColumnatmIfCurrentTxCellsread-onlycurrentThe counter associated with the number of transmitted cells, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.2.1.2ColumnatmIfCurrentRxCellsread-onlycurrentThe counter associated with the number of received cells, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.2.1.3ColumnatmIfCurrentCorrectedHecsread-onlycurrentThe counter associated with the number of cells with corrected HEC errors, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.2.1.4ColumnatmIfCurrentUncorrectedHecsread-onlycurrentThe counter associated with the number of cells with uncorrected HEC errors, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.2.1.5ColumnatmIfCurrentHecErrorSecondsread-onlycurrentThe counter associated with the number of seconds with HEC errors, encountered by an ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.3TableatmIfIntervalTablenot-accessiblecurrentThe ATM interface Interval table.
1.3.6.1.4.1.164.12.2.1.1.3.1RowatmIfIntervalEntrynot-accessiblecurrentAn entry in the ATM interface Interval table.
1.3.6.1.4.1.164.12.2.1.1.3.1.1ColumnatmIfIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.1.3.1.2ColumnatmIfIntervalTxCellsread-onlycurrentThe counter associated with the number of transmitted cells , encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.1.3.1.3ColumnatmIfIntervalRxCellsread-onlycurrentThe counter associated with the number of received cells, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.1.3.1.4ColumnatmIfIntervalCorrectedHecsread-onlycurrentThe counter associated with the number of cells with corrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, int…
1.3.6.1.4.1.164.12.2.1.1.3.1.5ColumnatmIfIntervalUncorrectedHecsread-onlycurrentThe counter associated with the number of cells with uncorrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, i…
1.3.6.1.4.1.164.12.2.1.1.3.1.6ColumnatmIfIntervalHecErrorSecondsread-onlycurrentThe counter associated with the number of seconds with HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.1.4Tableaal5VccXTablenot-accessiblecurrentThis table is an extension to AAL5 VCC Table.
1.3.6.1.4.1.164.12.2.1.1.4.1Rowaal5VccXEntrynot-accessiblecurrentThis list contains the additional AAL5 VCC performance parameters and is indexed by ifIndex values of AAL5 interfaces and the associated VPI/VCI values.
1.3.6.1.4.1.164.12.2.1.1.4.1.1Columnaal5VccInFramesread-onlycurrentThe number of frames received via this interface.
1.3.6.1.4.1.164.12.2.1.1.4.1.2Columnaal5VccOutFramesread-onlycurrentThe total number of frames transmitted out of the interface.
1.3.6.1.4.1.164.12.2.1.1.4.1.3Columnaal5VccUnknownProtocolFramesread-onlycurrentThe number of frames that were discarded due to unsupported protocol encapsulation on this VCC.
1.3.6.1.4.1.164.12.2.1.1.5Tableaal5VccCurrentTablenot-accessiblecurrentThe AAL5 Current table.
1.3.6.1.4.1.164.12.2.1.1.5.1Rowaal5VccCurrentEntrynot-accessiblecurrentAn entry in the AAL5 Current table.
1.3.6.1.4.1.164.12.2.1.1.5.1.1Columnaal5VccCurrentInFramesread-onlycurrentThe counter associated with the number of received frames, encountered by the AAL5 interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.5.1.2Columnaal5VccCurrentOutFramesread-onlycurrentThe counter associated with the number of transmitted frames, encountered by the AAL5 interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.5.1.3Columnaal5VccCurrentUnknownProtocolFramesread-onlycurrentThe counter associated with the number of frames that were discarded due to unsupported protocol encapsulation, encountered by the AAL5 interface in the curren…
1.3.6.1.4.1.164.12.2.1.1.5.1.4Columnaal5VccCurrentCrcErrorsread-onlycurrentThe counter associated with the number of AAL5 CPCS PDUs received with CRC-32 errors, encountered by the AAL5 interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.5.1.5Columnaal5VccCurrentLengthErrorread-onlycurrentThe counter associated with the number of received frames with length error, encountered by the AAL5 interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.1.5.1.6Columnaal5VccCurrentInputCongestionDroppedread-onlycurrentThe counter associated with the number of dropped frames due to congestion, encountered by the AAL5 interface on the Receive direction in the current 15 minute…
1.3.6.1.4.1.164.12.2.1.1.5.1.7Columnaal5VccCurrentOutputCongestionDroppedread-onlycurrentThe counter associated with the number of dropped frames due to congestion, encountered by the AAL5 interface on the Transmit direction in the current 15 minut…
1.3.6.1.4.1.164.12.2.1.1.6Tableaal5VccIntervalTablenot-accessiblecurrentThe AAL5 Interval table.
1.3.6.1.4.1.164.12.2.1.1.6.1Rowaal5VccIntervalEntrynot-accessiblecurrentAn entry in the AAL5 Interval table.
1.3.6.1.4.1.164.12.2.1.1.6.1.1Columnaal5VccIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.1.6.1.2Columnaal5VccIntervalInFramesread-onlycurrentThe counter associated with the number of received frames, encountered by the AAL5 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.1.6.1.3Columnaal5VccIntervalOutFramesread-onlycurrentThe counter associated with the number of transmitted frames, encountered by the AAL5 interface in in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.1.6.1.4Columnaal5VccIntervalUnknownProtocolFramesread-onlycurrentThe counter associated with the number of frames that were discarded due to unsupported protocol encapsulation, encountered by the AAL5 interface in one of the…
1.3.6.1.4.1.164.12.2.1.1.6.1.5Columnaal5VccIntervalCrcErrorsread-onlycurrentThe counter associated with the number of AAL5 CPCS PDUs received with CRC-32 errors, encountered by the AAL5 interface in one of the previous 96, individual 1…
1.3.6.1.4.1.164.12.2.1.1.6.1.6Columnaal5VccIntervalLengthErrorread-onlycurrentThe counter associated with the number of received frames with length error, encountered by the AAL5 interface in one of the previous 96, individual 15 minute,…
1.3.6.1.4.1.164.12.2.1.1.6.1.7Columnaal5VccIntervalInputCongestionDroppedread-onlycurrentThe counter associated with the number of dropped frames due to a congestion, encountered by the AAL5 interface on the Receive direction in one of the previous…
1.3.6.1.4.1.164.12.2.1.1.6.1.8Columnaal5VccIntervalOutputCongestionDroppedread-onlycurrentThe counter associated with the number of dropped frames due to a congestion, encountered by the AAL5 interface on the Transmit direction in one of the previou…
1.3.6.1.4.1.164.12.2.1.2NodeatmPvcPerformance
1.3.6.1.4.1.164.12.2.1.2.1NodeatmVpPerformance
1.3.6.1.4.1.164.12.2.1.2.1.1TableatmVpCurrentTablenot-accessiblecurrentThe ATM VP Current table.
1.3.6.1.4.1.164.12.2.1.2.1.1.1RowatmVpCurrentEntrynot-accessiblecurrentAn entry in the ATM VP Current table.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.1ColumnatmVpCurrentVpiread-onlycurrentThe VPI of the VPL.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.2ColumnatmVpCurrentRxCellsClp01read-onlycurrentThe counter associated with the number of transmitted cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.3ColumnatmVpCurrentRxCellsClp0read-onlycurrentThe counter associated with the number of received cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.4ColumnatmVpCurrentGcra0Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA0, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.5ColumnatmVpCurrentGcra1Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA1, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.6ColumnatmVpCurrentRxAISread-onlycurrentThe counter associated with the number of received AIS cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.7ColumnatmVpCurrentTxAISread-onlycurrentThe counter associated with the number of transmitted AIS cells, encountered by the VPL of this ATM interface in the current 15 minute interval. Not Supported …
1.3.6.1.4.1.164.12.2.1.2.1.1.1.8ColumnatmVpCurrentRxRDIread-onlycurrentThe counter associated with the number of received RDI cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.9ColumnatmVpCurrentTxRDIread-onlycurrentThe counter associated with the number of transmitted RDI cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.10ColumnatmVpCurrentContinuityLossread-onlycurrentThe counter associated with the number of loss of continuity cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.11ColumnatmVpCurrentUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.12ColumnatmVpCurrentSESread-onlycurrentThe counter associated with the number of Severerly Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.13ColumnatmVpCurrentCDCread-onlycurrentAmount of cells dropped in the current 15 minute interval of the VP connection.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.14ColumnatmVpCurrentTotalDiscardsread-onlycurrentThe total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.15ColumnatmVpCurrentClp0Discardsread-onlycurrentThe total number of valid ATM cells received with CLP=0 and discarded by the traffic policing entity.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.16ColumnatmVpCurrentTotalCellOutsread-onlycurrentThe total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.17ColumnatmVpCurrentClp0CellOutsread-onlycurrentThe total number of valid ATM cells transmitted with CLP=0 by this VPL.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.18ColumnatmVpCurrentTaggedOutsread-onlycurrentThe total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.19ColumnatmVpCurrentPCRread-onlycurrentThe maximum traffic rate encountered in the last interval of the VP connection (monitored once a second).
1.3.6.1.4.1.164.12.2.1.2.1.1.1.20ColumnatmVpCurrentSCRread-onlycurrentThe average traffic rate during the last interval of the VP connection.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.21ColumnatmVpCurrentMCRread-onlycurrentMCR - The minimum traffic rate encountered in the last interval of the VP connection (monitored once a second).
1.3.6.1.4.1.164.12.2.1.2.1.1.1.22ColumnatmVpCurrentShaperTotalDiscardsread-onlycurrentThe total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.23ColumnatmVpCurrentShaperClp0Discardsread-onlycurrentThe total number of CLP0 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.1.1.1.24ColumnatmVpCurrentShaperClp1Discardsread-onlycurrentThe total number of CLP1 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.1.2TableatmVpPMCurrentTablenot-accessiblecurrentThe ATM VP Current table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.1.2.1RowatmVpPMCurrentEntrynot-accessiblecurrentAn entry in the ATM VP Current table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.1ColumnatmVpPMCurrentVpiread-onlycurrentThe VPI of the VPL.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.2ColumnatmVpPMCurrentDirread-onlycurrentThe direction of performance management.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.3ColumnatmVpPMCurrentTxClp01read-onlycurrentThe counter associated with the number of transmitted CLP 0+1 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.4ColumnatmVpPMCurrentTxClp0read-onlycurrentThe counter associated with the number of transmitted CLP 0 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.5ColumnatmVpPMCurrentRxClp01read-onlycurrentThe counter associated with the number of received CLP 0+1 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.6ColumnatmVpPMCurrentRxClp0read-onlycurrentThe counter associated with the number of received CLP 0 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.7ColumnatmVpPMCurrentErroredCellsread-onlycurrentThe counter associated with the number of errored cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.8ColumnatmVpPMCurrentLostCellsread-onlycurrentThe counter associated with the number of lost cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.9ColumnatmVpPMCurrentMisinsertedCellsread-onlycurrentThe counter associated with the number of misinserted cells, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.10ColumnatmVpPMCurrentECBread-onlycurrentThe counter associated with the number of ECB, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.11ColumnatmVpPMCurrentSECBread-onlycurrentThe counter associated with the number of SECB, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.12ColumnatmVpPMCurrentESread-onlycurrentThe counter associated with the number of Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.13ColumnatmVpPMCurrentSESread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.14ColumnatmVpPMCurrentUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.15ColumnatmVpPMCurrentIntervalQualityread-onlycurrentIf the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.
1.3.6.1.4.1.164.12.2.1.2.1.2.1.16ColumnatmVpPMCurrentLastDayQualityread-onlycurrentIf the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.
1.3.6.1.4.1.164.12.2.1.2.1.3TableatmVpIntervalTablenot-accessiblecurrentThe ATM Vp Interval table.
1.3.6.1.4.1.164.12.2.1.2.1.3.1RowatmVpIntervalEntrynot-accessiblecurrentAn entry in the ATM Vp Interval table.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.1ColumnatmVpIntervalVpiread-onlycurrentThe VPI of the VPL.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.2ColumnatmVpIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.2.1.3.1.3ColumnatmVpIntervalRxCellsClp01read-onlycurrentThe counter associated with the number of transmitted cells , encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.4ColumnatmVpIntervalRxCellsClp0read-onlycurrentThe counter associated with the number of received cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.5ColumnatmVpIntervalGcra0Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA0, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.6ColumnatmVpIntervalGcra1Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA1, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.7ColumnatmVpIntervalRxAISread-onlycurrentThe counter associated with the number of received AIS cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.8ColumnatmVpIntervalTxAISread-onlycurrentThe counter associated with the number of transmitted AIS cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.9ColumnatmVpIntervalRxRDIread-onlycurrentThe counter associated with the number of received RDI cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.10ColumnatmVpIntervalTxRDIread-onlycurrentThe counter associated with the number of transmitted RDI cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.11ColumnatmVpIntervalContinuityLossread-onlycurrentThe counter associated with the number of Continuity Loss cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.12ColumnatmVpIntervalUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.13ColumnatmVpIntervalSESread-onlycurrentThe counter associated with the number of Severerly Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interv…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.14ColumnatmVpIntervalCDCread-onlycurrentAmount of cells dropped in the 15 minute interval of the VP connection.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.15ColumnatmVpIntervalTotalDiscardsread-onlycurrentThe total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.16ColumnatmVpIntervalClp0Discardsread-onlycurrentThe total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.17ColumnatmVpIntervalTotalCellOutsread-onlycurrentThe total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.18ColumnatmVpIntervalClp0CellOutsread-onlycurrentThe total number of valid ATM cells transmitted with CLP=0 by this VPL.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.19ColumnatmVpIntervalTaggedOutsread-onlycurrentThe total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.20ColumnatmVpIntervalPCRread-onlycurrentThe maximum traffic rate encountered in the last interval of the VP connection (monitored once a second) encountered by an ATM interface/VP in one of the previ…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.21ColumnatmVpIntervalSCRread-onlycurrentThe average traffic rate during the last interval of the VP connection , encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, in…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.22ColumnatmVpIntervalMCRread-onlycurrentMCR - The minimum traffic rate encountered in the last interval of the VP connection (monitored once a second) encountered by an ATM interface/VP in one of the…
1.3.6.1.4.1.164.12.2.1.2.1.3.1.23ColumnatmVpIntervalShaperTotalDiscardsread-onlycurrentThe total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.24ColumnatmVpIntervalShaperClp0Discardsread-onlycurrentThe total number of CLP0 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.1.3.1.25ColumnatmVpIntervalShaperClp1Discardsread-onlycurrentThe total number of CLP1 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.1.4TableatmVpPMIntervalTablenot-accessiblecurrentThe ATM Vp Interval table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.1.4.1RowatmVpPMIntervalEntrynot-accessiblecurrentAn entry in the ATM Vp Interval table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.1ColumnatmVpPMIntervalVpiread-onlycurrentThe VPI of the VPL.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.2ColumnatmVpPMIntervalDirread-onlycurrentThe direction of performance management.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.3ColumnatmVpPMIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.2.1.4.1.4ColumnatmVpPMIntervalTxClp01read-onlycurrentThe counter associated with the number of transmitted CLP 0+1 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interv…
1.3.6.1.4.1.164.12.2.1.2.1.4.1.5ColumnatmVpPMIntervalTxClp0read-onlycurrentThe counter associated with the number of transmitted CLP 0 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interval…
1.3.6.1.4.1.164.12.2.1.2.1.4.1.6ColumnatmVpPMIntervalRxClp01read-onlycurrentThe counter associated with the number of received CLP 0+1 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.7ColumnatmVpPMIntervalRxClp0read-onlycurrentThe counter associated with the number of received CLP 0 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.8ColumnatmVpPMIntervalErroredCellsread-onlycurrentThe counter associated with the number of Errored cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.9ColumnatmVpPMIntervalLostCellsread-onlycurrentThe counter associated with the number of Lost cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.10ColumnatmVpPMIntervalMisinsertedCellsread-onlycurrentThe counter associated with the number of Misinserted cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.11ColumnatmVpPMIntervalECBread-onlycurrentThe counter associated with the number of ECBs encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.12ColumnatmVpPMIntervalSECBread-onlycurrentThe counter associated with the number of SECBs encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.13ColumnatmVpPMIntervalESread-onlycurrentThe counter associated with the number of Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.14ColumnatmVpPMIntervalSESread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, interva…
1.3.6.1.4.1.164.12.2.1.2.1.4.1.15ColumnatmVpPMIntervalUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.16ColumnatmVpPMIntervalQualityread-onlycurrentIf the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.
1.3.6.1.4.1.164.12.2.1.2.1.4.1.17ColumnatmVpPMIntervalLastDayQualityread-onlycurrentIf the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.
1.3.6.1.4.1.164.12.2.1.2.1.5TableatmVpQoSTablenot-accessiblecurrentThe VP QoS table.
1.3.6.1.4.1.164.12.2.1.2.1.5.1RowatmVpQoSEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.2.1.2.1.5.1.1ColumnatmVpQoSPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 2 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received…
1.3.6.1.4.1.164.12.2.1.2.1.5.1.2ColumnatmVpQoSElapsedTimeread-onlycurrentElapsed Time in seconds. - for atmVpQoSPeriodRef = currentPeriod: The period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAll…
1.3.6.1.4.1.164.12.2.1.2.1.5.1.3ColumnatmVpQoSUASread-onlycurrentNumber of Unavailable Seconds for the reference period (atmVpQoSPeriodRef).
1.3.6.1.4.1.164.12.2.1.2.1.6TableatmVpPMQoSTablenot-accessiblecurrentThe PM VP QoS table.
1.3.6.1.4.1.164.12.2.1.2.1.6.1RowatmVpPMQoSEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.2.1.2.1.6.1.1ColumnatmVpPMQoSDirectionread-onlycurrentThe direction of performance management.
1.3.6.1.4.1.164.12.2.1.2.1.6.1.2ColumnatmVpPMQoSPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received…
1.3.6.1.4.1.164.12.2.1.2.1.6.1.3ColumnatmVpPMQoSCLRread-onlycurrentCell Loss Ratio counter for the reference period (atmVpPMQoSPeriodRef)- defined in accordance with I.356 , in %. The value will be multipuled by 100.
1.3.6.1.4.1.164.12.2.1.2.1.6.1.4ColumnatmVpPMQoSCERread-onlycurrentCell Error Ratio counter for the reference period (atmVpPMQoSPeriodRef) defined in accordance with I.356 , in %. The value will be multipuled by 100.
1.3.6.1.4.1.164.12.2.1.2.1.6.1.5ColumnatmVpPMQoSCMRread-onlycurrentCell Misinsertion Ratio counter for the reference period (atmVpPMQoSPeriodRef) defined in accordance with I.356 , cells/sec .
1.3.6.1.4.1.164.12.2.1.2.1.7TableatmVpShaperStatTablenot-accessiblecurrentThe ATM VP shaper statistics table.
1.3.6.1.4.1.164.12.2.1.2.1.7.1RowatmVpShaperStatEntrynot-accessiblecurrentAn entry in the ATM VP shaper statistics table.
1.3.6.1.4.1.164.12.2.1.2.1.7.1.1ColumnatmVpShaperDiscardedread-onlycurrentThe number of Cells that were discarded in the shaper on that VPC due to buffer overflow. This counter counts till it reaches its MAX value (20 bits) and then …
1.3.6.1.4.1.164.12.2.1.2.1.7.1.2ColumnatmVpShaperOccupationread-onlycurrentThe number of Cells that are currently stored in the buffer. This parameter is limited to 20 bits.
1.3.6.1.4.1.164.12.2.1.2.1.7.1.3ColumnatmVpShaperMaxOccupationread-onlycurrentThe Maximum number of Cells that were stored in the buffer, since this VP was activated. This parameter is limited to 20 bits.
1.3.6.1.4.1.164.12.2.1.2.1.7.1.4ColumnatmVpShaperLevelread-onlycurrentThe occupation of the buffer according to a predefined threshold. empty - buffer is Empty full - buffer is Full below - buffer is Below the threshold above - b…
1.3.6.1.4.1.164.12.2.1.2.1.7.1.5ColumnatmVpShaperEpdDroppedread-onlycurrentThe number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last second. This parameter is limited to 24 bits. Applicable f…
1.3.6.1.4.1.164.12.2.1.2.1.7.1.6ColumnatmVpShaperTotalEpdDroppedread-onlycurrentThe Total number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last 15 minutes. This counter automatically reset itself …
1.3.6.1.4.1.164.12.2.1.2.2NodeatmVcPerformance
1.3.6.1.4.1.164.12.2.1.2.2.1TableatmVcCurrentTablenot-accessiblecurrentThe ATM VC Current table.
1.3.6.1.4.1.164.12.2.1.2.2.1.1RowatmVcCurrentEntrynot-accessiblecurrentAn entry in the ATM VC Current table.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.1ColumnatmVcCurrentVpiread-onlycurrentThe VPI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.2ColumnatmVcCurrentVciread-onlycurrentThe VCI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.3ColumnatmVcCurrentRxCellsClp01read-onlycurrentThe counter associated with the number of transmitted cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.4ColumnatmVcCurrentRxCellsClp0read-onlycurrentThe counter associated with the number of received cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.5ColumnatmVcCurrentGcra0Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA0, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.6ColumnatmVcCurrentGcra1Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA1, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.7ColumnatmVcCurrentRxAISread-onlycurrentThe counter associated with the number of received AIS cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.8ColumnatmVcCurrentTxAISread-onlycurrentThe counter associated with the number of transmitted AIS cells, encountered by the VCL of this ATM interface in the current 15 minute interval. Not Supported …
1.3.6.1.4.1.164.12.2.1.2.2.1.1.9ColumnatmVcCurrentRxRDIread-onlycurrentThe counter associated with the number of received RDI cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.10ColumnatmVcCurrentTxRDIread-onlycurrentThe counter associated with the number of transmitted RDI cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.11ColumnatmVcCurrentContinuityLossread-onlycurrentThe counter associated with the number of loss of continuity cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.12ColumnatmVcCurrentUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.13ColumnatmVcCurrentSESread-onlycurrentThe counter associated with the number of Severerly Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.14ColumnatmVcCurrentCDCread-onlycurrentAmount of cells dropped in the current 15 minute interval of the VC connection.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.15ColumnatmVcCurrentTotalDiscardsread-onlycurrentThe total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.16ColumnatmVcCurrentClp0Discardsread-onlycurrentThe total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.17ColumnatmVcCurrentTotalCellOutsread-onlycurrentThe total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.18ColumnatmVcCurrentClp0CellOutsread-onlycurrentThe total number of valid ATM cells transmitted with CLP=0 by this VPL.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.19ColumnatmVcCurrentTaggedOutsread-onlycurrentThe total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.20ColumnatmVcCurrentPCRread-onlycurrentThe maximum traffic rate encountered in the last interval of the VC connection (monitored once a second).
1.3.6.1.4.1.164.12.2.1.2.2.1.1.21ColumnatmVcCurrentSCRread-onlycurrentThe average traffic rate during the last interval of the VC connection.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.22ColumnatmVcCurrentMCRread-onlycurrentMCR - The minimum traffic rate encountered in the last interval of the VC connection (monitored once a second).
1.3.6.1.4.1.164.12.2.1.2.2.1.1.23ColumnatmVcCurrentShaperTotalDiscardsread-onlycurrentThe total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.24ColumnatmVcCurrentShaperClp0Discardsread-onlycurrentThe total number of CLP0 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.2.1.1.25ColumnatmVcCurrentShaperClp1Discardsread-onlycurrentThe total number of CLP1 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.2.2TableatmVcPMCurrentTablenot-accessiblecurrentThe ATM VC Current table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.2.1RowatmVcPMCurrentEntrynot-accessiblecurrentAn entry in the ATM VC Current table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.1ColumnatmVcPMCurrentVpiread-onlycurrentThe VPI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.2ColumnatmVcPMCurrentVciread-onlycurrentThe VCI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.3ColumnatmVcPMCurrentDirread-onlycurrentThe direction of Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.4ColumnatmVcPMCurrentTxClp01read-onlycurrentThe counter associated with the number of transmitted CLP 0+1 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.5ColumnatmVcPMCurrentTxClp0read-onlycurrentThe counter associated with the number of transmitted CLP 0 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.6ColumnatmVcPMCurrentRxClp01read-onlycurrentThe counter associated with the number of received CLP 0+1 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.7ColumnatmVcPMCurrentRxClp0read-onlycurrentThe counter associated with the number of received CLP 0 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.8ColumnatmVcPMCurrentErroredCellsread-onlycurrentThe counter associated with the number of errored cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.9ColumnatmVcPMCurrentLostCellsread-onlycurrentThe counter associated with the number of lost cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.10ColumnatmVcPMCurrentMisinsertedCellsread-onlycurrentThe counter associated with the number of misinserted cells, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.11ColumnatmVcPMCurrentECBread-onlycurrentThe counter associated with the number of ECBs encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.12ColumnatmVcPMCurrentSECBread-onlycurrentThe counter associated with the number of SECBs encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.13ColumnatmVcPMCurrentESread-onlycurrentThe counter associated with the number of Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.14ColumnatmVcPMCurrentSESread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.15ColumnatmVcPMCurrentUASread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.16ColumnatmVcPMCurrentIntervalQualityread-onlycurrentIf the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.
1.3.6.1.4.1.164.12.2.1.2.2.2.1.17ColumnatmVcPMCurrentLastDayQualityread-onlycurrentIf the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.
1.3.6.1.4.1.164.12.2.1.2.2.3TableatmVcIntervalTablenot-accessiblecurrentThe ATM Vc Interval table.
1.3.6.1.4.1.164.12.2.1.2.2.3.1RowatmVcIntervalEntrynot-accessiblecurrentAn entry in the ATM Vc Interval table.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.1ColumnatmVcIntervalVpiread-onlycurrentThe VPI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.2ColumnatmVcIntervalVciread-onlycurrentThe VCI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.3ColumnatmVcIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.2.2.3.1.4ColumnatmVcIntervalRxCellsClp01read-onlycurrentThe counter associated with the number of transmitted cells , encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.5ColumnatmVcIntervalRxCellsClp0read-onlycurrentThe counter associated with the number of received cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.6ColumnatmVcIntervalGcra0Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA0, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.7ColumnatmVcIntervalGcra1Violationsread-onlycurrentThe counter associated with the number of cells violating GCRA1, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.8ColumnatmVcIntervalRxAISread-onlycurrentThe counter associated with the number of received AIS cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.9ColumnatmVcIntervalTxAISread-onlycurrentThe counter associated with the number of transmitted AIS cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.10ColumnatmVcIntervalRxRDIread-onlycurrentThe counter associated with the number of received RDI cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.11ColumnatmVcIntervalTxRDIread-onlycurrentThe counter associated with the number of transmitted RDI cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.12ColumnatmVcIntervalContinuityLossread-onlycurrentThe counter associated with the number of Continuity Loss cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.13ColumnatmVcIntervalUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.14ColumnatmVcIntervalSESread-onlycurrentThe counter associated with the number of Severerly Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interv…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.15ColumnatmVcIntervalCDCread-onlycurrentAmount of cells dropped in the 15 minute interval of the VC connection.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.16ColumnatmVcIntervalTotalDiscardsread-onlycurrentThe total number of valid ATM cells discarded by the traffic policing entity. This includes cells originally received with CLP=0 and CLP=1.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.17ColumnatmVcIntervalClp0Discardsread-onlycurrentThe total number of valid ATM cells received with CLP=0 an discarded by the traffic policing entity.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.18ColumnatmVcIntervalTotalCellOutsread-onlycurrentThe total number of valid ATM cells transmitted by this VPL. This includes both CLP=0 and CLP=1 cells.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.19ColumnatmVcIntervalClp0CellOutsread-onlycurrentThe total number of valid ATM cells transmitted with CLP=0 by this VPL.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.20ColumnatmVcIntervalTaggedOutsread-onlycurrentThe total number of valid ATM cells tagged by the traffic policing entity from CLP=0 to CLP=1 and transmitted by this VPL.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.21ColumnatmVcIntervalPCRread-onlycurrentThe maximum traffic rate encountered in the last interval of the VC connection (monitored once a second) encountered by an ATM interface/VC in one of the previ…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.22ColumnatmVcIntervalSCRread-onlycurrentThe average traffic rate during the last interval of the VC connection, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, int…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.23ColumnatmVcIntervalMCRread-onlycurrentMCR - The minimum traffic rate encountered in the last interval of the VC connection (monitored once a second) encountered by an ATM interface/VC in one of the…
1.3.6.1.4.1.164.12.2.1.2.2.3.1.24ColumnatmVcIntervalShaperTotalDiscardsread-onlycurrentThe total number of cells (CLP0 and CLP1) discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.25ColumnatmVcIntervalShaperClp0Discardsread-onlycurrentThe total number of CLP0 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.2.3.1.26ColumnatmVcIntervalShaperClp1Discardsread-onlycurrentThe total number of CLP1 cells discarded due to congestion by the traffic shaper.
1.3.6.1.4.1.164.12.2.1.2.2.4TableatmVcPMIntervalTablenot-accessiblecurrentThe ATM Vc Interval table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.4.1RowatmVcPMIntervalEntrynot-accessiblecurrentAn entry in the ATM Vc Interval table for Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.1ColumnatmVcPMIntervalVpiread-onlycurrentThe VPI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.2ColumnatmVcPMIntervalVciread-onlycurrentThe VCI of the VCL.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.3ColumnatmVcPMIntervalDirread-onlycurrentThe direction of Performance Management.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.4ColumnatmVcPMIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.2.1.2.2.4.1.5ColumnatmVcPMIntervalTxClp01read-onlycurrentThe counter associated with the number of transmitted CLP 0+1 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interv…
1.3.6.1.4.1.164.12.2.1.2.2.4.1.6ColumnatmVcPMIntervalTxClp0read-onlycurrentThe counter associated with the number of transmitted CLP 0 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interval…
1.3.6.1.4.1.164.12.2.1.2.2.4.1.7ColumnatmVcPMIntervalRxClp01read-onlycurrentThe counter associated with the number of received CLP 0+1 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.8ColumnatmVcPMIntervalRxClp0read-onlycurrentThe counter associated with the number of received CLP 0 cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.9ColumnatmVcPMIntervalErroredCellsread-onlycurrentThe counter associated with the number of Errored cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.10ColumnatmVcPMIntervalLostCellsread-onlycurrentThe counter associated with the number of Lost cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.11ColumnatmVcPMIntervalMisinsertedCellsread-onlycurrentThe counter associated with the number of Misinserted cells, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.12ColumnatmVcPMIntervalECBread-onlycurrentThe counter associated with the number of ECBs encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.13ColumnatmVcPMIntervalSECBread-onlycurrentThe counter associated with the number of SECBs encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.14ColumnatmVcPMIntervalESread-onlycurrentThe counter associated with the number of Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.15ColumnatmVcPMIntervalSESread-onlycurrentThe counter associated with the number of Severely Errored Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, interva…
1.3.6.1.4.1.164.12.2.1.2.2.4.1.16ColumnatmVcPMIntervalUASread-onlycurrentThe counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VC in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.17ColumnatmVcPMIntervalQualityread-onlycurrentIf the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.
1.3.6.1.4.1.164.12.2.1.2.2.4.1.18ColumnatmVcPMIntervalLastDayQualityread-onlycurrentIf the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.
1.3.6.1.4.1.164.12.2.1.2.2.6TableatmVcQoSTablenot-accessiblecurrentThe ATM VP QoS table.
1.3.6.1.4.1.164.12.2.1.2.2.6.1RowatmVcQoSEntrynot-accessiblecurrentAn entry in the ATM VP table.
1.3.6.1.4.1.164.12.2.1.2.2.6.1.1ColumnatmVcQoSPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 2 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received…
1.3.6.1.4.1.164.12.2.1.2.2.6.1.2ColumnatmVcQoSElapsedTimeread-onlycurrentElapsed Time in seconds. - for atmVcQoSPeriodRef = currentPeriod: The period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAll…
1.3.6.1.4.1.164.12.2.1.2.2.6.1.3ColumnatmVcQoSUASread-onlycurrentNumber of Unavailable Seconds for the reference period (atmVcQoSPeriodRef).
1.3.6.1.4.1.164.12.2.1.2.2.7TableatmVcPMQoSTablenot-accessiblecurrentThe PM VC QoS table.
1.3.6.1.4.1.164.12.2.1.2.2.7.1RowatmVcPMQoSEntrynot-accessiblecurrentAn entry in the VC PM QoS table.
1.3.6.1.4.1.164.12.2.1.2.2.7.1.1ColumnatmVcPMQoSDirectionread-onlycurrentThe direction of performance management.
1.3.6.1.4.1.164.12.2.1.2.2.7.1.2ColumnatmVcPMQoSPeriodRefread-onlycurrentThis object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received…
1.3.6.1.4.1.164.12.2.1.2.2.7.1.3ColumnatmVcPMQoSCLRread-onlycurrentCell Loss Ratio counter for the reference period (atmVcPMQoSPeriodRef)- defined in accordance with I.356 , in %. The value will be multipuled by 100.
1.3.6.1.4.1.164.12.2.1.2.2.7.1.4ColumnatmVcPMQoSCERread-onlycurrentCell Error Ratio counter for the reference period (atmVcPMQoSPeriodRef) defined in accordance with I.356 , in %. The value will be multipuled by 100.
1.3.6.1.4.1.164.12.2.1.2.2.7.1.5ColumnatmVcPMQoSCMRread-onlycurrentCell Miss-insertion Ratio counter for the reference period (atmVcPMQoSPeriodRef) defined in accordance with I.356 , cells/sec .
1.3.6.1.4.1.164.12.2.1.2.2.8TableatmVcShaperStatTablenot-accessiblecurrentThe ATM VC shaper statistics table.
1.3.6.1.4.1.164.12.2.1.2.2.8.1RowatmVcShaperStatEntrynot-accessiblecurrentAn entry in the ATM VC shaper statistics table.
1.3.6.1.4.1.164.12.2.1.2.2.8.1.1ColumnatmVcShaperDiscardedread-onlycurrentThe number of Cells that were discarded in the shaper on that VCC due to buffer overflow. This counter counts till it reaches its MAX value (20 bits) and then …
1.3.6.1.4.1.164.12.2.1.2.2.8.1.2ColumnatmVcShaperOccupationread-onlycurrentThe number of Cells that are currently stored in the buffer. This parameter is limited to 20 bits.
1.3.6.1.4.1.164.12.2.1.2.2.8.1.3ColumnatmVcShaperMaxOccupationread-onlycurrentThe Maximum number of Cells that were stored in the buffer, since this VC was activated. This parameter is limited to 20 bits.
1.3.6.1.4.1.164.12.2.1.2.2.8.1.4ColumnatmVcShaperLevelread-onlycurrentThe occupation of the buffer according to a predefined threshold. empty - buffer is Empty full - buffer is Full below - buffer is Below the threshold above - b…
1.3.6.1.4.1.164.12.2.1.2.2.8.1.5ColumnatmVcShaperEpdDroppedread-onlycurrentThe number of Cells that were dropped in the shaper on that VCC due to EPD\PPD mechanism in the last second. This parameter is limited to 24 bits. Applicable f…
1.3.6.1.4.1.164.12.2.1.2.2.8.1.6ColumnatmVcShaperTotalEpdDroppedread-onlycurrentThe Total number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last 15 minutes. This counter automatically reset itself …
1.3.6.1.4.1.164.12.2.1.3TableatmIntervalDateTablenot-accessiblecurrentThe agent will keep in this group the date & time corresponding to each interval.
1.3.6.1.4.1.164.12.2.1.3.1RowatmIntervalDateEntrynot-accessiblecurrentThe date & time for the given interval.
1.3.6.1.4.1.164.12.2.1.3.1.1ColumnatmIntervalDateIntervalread-onlycurrentThe interval number defining this entry.
1.3.6.1.4.1.164.12.2.1.3.1.2ColumnatmIntervalDateDateread-onlycurrentThe date corresponding to this interval.
1.3.6.1.4.1.164.12.2.1.3.1.3ColumnatmIntervalDateTimeread-onlycurrentThe time corresponding to this interval.
1.3.6.1.4.1.164.12.2.2NodeatmGenSystem
1.3.6.1.4.1.164.12.2.2.1NodeatmGenSysGen
1.3.6.1.4.1.164.12.2.2.1.1TableatmGenSysSelfTestTablenot-accessiblecurrentA table containing the results of the initial testing of the device.
1.3.6.1.4.1.164.12.2.2.1.1.1RowatmGenSysSelfTestEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.2.2.1.1.1.1ColumnatmGenSysSelfTestIndexread-onlycurrentA running index for the table.
1.3.6.1.4.1.164.12.2.2.1.1.1.2ColumnatmGenSysSelfTestResultread-onlycurrentThe results of the initial testing of the device.
1.3.6.1.4.1.164.12.2.2.1.2ScalaratmGenSysLogClearAllread-writecurrentSetting the variable to clear(3) removes all entries in the Log Buffer of the agent. The agent will immediately reset the variable to off(2).
1.3.6.1.4.1.164.12.2.2.1.3TableatmGenSysLogTablenot-accessiblecurrentA copy of the log buffer.
1.3.6.1.4.1.164.12.2.2.1.3.1RowatmGenSysLogEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.2.2.1.3.1.1ColumnatmGenSysLogIndexread-onlycurrentThe index of the log buffer.
1.3.6.1.4.1.164.12.2.2.1.3.1.2ColumnatmGenSysLogMessageread-onlycurrentThe log buffer entry message text.
1.3.6.1.4.1.164.12.2.2.1.4ScalaratmGenSysSetDefaultConfgread-writecurrentWhen set to on(3), the agent will set all the configuration parameters to their default values. The variable is then reset to off(2) by the agent. The agent mu…
1.3.6.1.4.1.164.12.2.2.1.5TableatmGenSysCxRefTablenot-accessiblecurrentA Cross Reference table. The table maintains an index of an object which is also the table index, and a counter that indicates how many times this object was r…
1.3.6.1.4.1.164.12.2.2.1.5.1RowatmGenSysCxRefEntrynot-accessiblecurrentThe entries will be added by the agent upon an entry addition in the referenced tables (TD table, FR Descriptor etc.)
1.3.6.1.4.1.164.12.2.2.1.5.1.1ColumnatmGenSysCxRefIndexread-onlycurrentThe index specifies an entry in the table of the object.
1.3.6.1.4.1.164.12.2.2.1.5.1.2ColumnatmGenSysCxRefCounterread-onlycurrentThe counter counts the number of references that have been made to the object .
1.3.6.1.4.1.164.12.3NodeatmNte
1.3.6.1.4.1.164.12.3.0IdentityatmNteEventscurrentThe events for RAD ATM products.
1.3.6.1.4.1.164.12.3.0.1NotificationatmAceStatusChangecurrentThe trap is sent every time there is a change in the state of one of the LEDs.
1.3.6.1.4.1.164.12.3.0.2NotificationatmAceAlarmTrapcurrentThe trap is sent whenever there is a transition from a no alarm state to a state with at least one active alarm. An active alarm state exists if: 1) The atmInt…
1.3.6.1.4.1.164.12.3.0.3NotificationatmAceModuleChangeTrapcurrentThe trap is sent every time a module is changed (Hot swapping). The second variable will be atmNteCardType to indicate the type of card that was inserted. The …
1.3.6.1.4.1.164.12.3.0.4NotificationatmAceRedundancyTrapcurrentThe trap is sent upon change in link as a result of redundancy. The ifIndex parameter indicates the current active link.
1.3.6.1.4.1.164.12.3.0.5NotificationatmAceModuleMismatchTrapcurrentThe trap is sent upon starting or stopping of a module mismatch state. A possible mismatch is when the inserted module is other than the programmed one.
1.3.6.1.4.1.164.12.3.1NodeatmNteSys
1.3.6.1.4.1.164.12.3.1.1NodeatmNteSysConfig
1.3.6.1.4.1.164.12.3.1.1.1TableatmNteManagerTablenot-accessiblecurrentThe Manager Table includes all the NMSs that receive traps from this agent. A single manager can receive traps on more than one PVC. The agent will set implici…
1.3.6.1.4.1.164.12.3.1.1.1.1RowatmNteManagerEntrynot-accessiblecurrentA single manager and the PVC for receiving traps.
1.3.6.1.4.1.164.12.3.1.1.1.1.1ColumnatmNteManagerIPread-onlycurrentThe IP address of the NMS.
1.3.6.1.4.1.164.12.3.1.1.1.1.2ColumnatmNteManagerPvcread-onlycurrentA PVC index. The range is 1..8. There are four PVCs on the User Port and four PVCs on the Network Port. The default VPI, VCI values are specified below.
1.3.6.1.4.1.164.12.3.1.1.1.1.3ColumnatmNteManagerIfIndexread-createcurrentThe ATM interface index of the management port.
1.3.6.1.4.1.164.12.3.1.1.1.1.4ColumnatmNteManagerVpiread-createcurrentThe VPI of the management VCL. Default: 0.
1.3.6.1.4.1.164.12.3.1.1.1.1.5ColumnatmNteManagerVciread-createcurrentThe VCI of the management VCL. Defaults: 32,33,34,35.
1.3.6.1.4.1.164.12.3.1.1.1.1.6ColumnatmNteManagerTrapMaskread-createcurrentThe value of this attribute determines the type of traps the agent should mask and not send to this NMS. The value is differently determined for different prod…
1.3.6.1.4.1.164.12.3.1.1.1.1.7ColumnatmNteManagerRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.1.1.1.1.8ColumnatmNteManagerNextHopread-createcurrentThis parameter is relevant to Ethernet out of band host only (PVC=10). The Next Hop IP address of the entry route.
1.3.6.1.4.1.164.12.3.1.1.1.1.9ColumnatmNteManagerVlanSupportread-createcurrentVLAN support (Tagging). no - No support to VLAN. yes - 4 VLAN bytes will be added to the frame.
1.3.6.1.4.1.164.12.3.1.1.1.1.10ColumnatmNteManagerVlanIdentifierread-createcurrentVLAN ID. Range is 0..4095.
1.3.6.1.4.1.164.12.3.1.1.1.1.11ColumnatmNteManagerVlanFramePriorityread-createcurrentVLAN Frame priority.Range is 0..7.
1.3.6.1.4.1.164.12.3.1.1.1.1.12ColumnatmNteManagerAlarmTrapMaskread-createcurrentThe value of this object determines the alarm traps that the agent should mask and not send to this NMS. The value is an Octet String, where each bit is assign…
1.3.6.1.4.1.164.12.3.1.1.1.1.13ColumnatmNteManagerConfigPortsread-createcurrentThis variable defines from which port/s this manager can configure the device. For IPmux 11 the value of this variable will be according to the ports combinati…
1.3.6.1.4.1.164.12.3.1.1.2ScalaratmNteUPLTCRread-writecurrentThe Unacceptable ES Limit threshold for Performance Management.
1.3.6.1.4.1.164.12.3.1.1.3ScalaratmNteDPLTCRread-writecurrentThe Degraded ES Limit threshold for Performance Management.
1.3.6.1.4.1.164.12.3.1.1.4ScalaratmNteSysLogClearAllread-writecurrentSetting the variable to clear(3) removes all entries in the Log Buffer of the agent. The agent will immediately reset the variable to off(2).
1.3.6.1.4.1.164.12.3.1.1.5ScalaratmNteUSESLTCRread-writecurrentThe Unacceptable SES Limit threshold for Performance Management.
1.3.6.1.4.1.164.12.3.1.1.6ScalaratmNteDSESLTCRread-writecurrentThe Degraded ES Limit threshold for Performance Management.
1.3.6.1.4.1.164.12.3.1.1.8NodeatmNteProtection
1.3.6.1.4.1.164.12.3.1.1.8.1ScalaratmNteProtectionModeread-writecurrentProtection Mode. MspOn - Multiplex section protection. pathOn - High order path protection. mspUniOn - Multiplex section Uni-directional protection. mspOneToN …
1.3.6.1.4.1.164.12.3.1.1.8.2ScalaratmNteProtectionWorkingLinkread-writecurrentSelects the working link when atmNteProtectionMode is off.
1.3.6.1.4.1.164.12.3.1.1.8.3ScalaratmNteProtectionSwitchLinkread-writecurrentForceSwitch - will force Switching from the working link to the backup link. Afterwards the agent will set atmNteProtectionSwitchLink back to off(1). atmNtePro…
1.3.6.1.4.1.164.12.3.1.1.9NodeatmNteConfOam
1.3.6.1.4.1.164.12.3.1.1.9.1ScalaratmNteConfOamSupportread-writecurrentOAM support mode, which determines the device location in a segment wise.
1.3.6.1.4.1.164.12.3.1.1.9.2NodeatmNteConfOamTransmission
1.3.6.1.4.1.164.12.3.1.1.9.2.1ScalaratmNteConfOamAISread-writecurrentDefines if a F4 segment OAM cell is transmitted due to problems in the other port, i.e. physical layer alarm or F4 defect. This is valid only when the ACE101 h…
1.3.6.1.4.1.164.12.3.1.1.9.2.2ScalaratmNteConfOamRDIread-writecurrentDefines if an F4 OAM RDI cell is transmitted due to physical layer problems in the port (in addition to F4 RDI cells transmitted due to ATM layer problems). Th…
1.3.6.1.4.1.164.12.3.1.1.9.3NodeatmNteConfOamAddressing
1.3.6.1.4.1.164.12.3.1.1.9.3.1ScalaratmNteConfLoopbackAddModeread-writecurrentLoopback addressing mode. on - will enable loopback addressing. off - will disable loopback addressing.
1.3.6.1.4.1.164.12.3.1.1.9.3.2ScalaratmNteConfLoopbackSourceAddread-writecurrentLoopback source address. This field is relevant when atmNteConfOamAddMode is on.
1.3.6.1.4.1.164.12.3.1.1.9.4TableatmNteConfOamIfTablenot-accessiblecurrentOAM support per ATM interface.
1.3.6.1.4.1.164.12.3.1.1.9.4.1RowatmNteConfOamIfEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.3.1.1.9.4.1.1ColumnatmNteConfOamIfAisRdiread-writecurrentThis parameter controls the generation of F4/F5 AIS and RDI due to lower order problems such as physical layer problems. For AIS: Defines if F4/F5 AIS cell is …
1.3.6.1.4.1.164.12.3.1.1.10NodeatmNteConfCAC
1.3.6.1.4.1.164.12.3.1.1.10.1ScalaratmNteConfCACModeread-writecurrentCAC support mode. For ACE2002, the following are the applicable values: disable(1), enable(2), 10 - 1000.
1.3.6.1.4.1.164.12.3.1.1.11TableatmNteHostIfTablenot-accessiblecurrentHost IP interface table.
1.3.6.1.4.1.164.12.3.1.1.11.1RowatmNteHostIfEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.3.1.1.11.1.1ColumnatmNteHostPvcIndexread-onlycurrentA PVC index. The range is 1..10.
1.3.6.1.4.1.164.12.3.1.1.11.1.2ColumnatmNteHostIPread-createcurrentThe host interface IP address.
1.3.6.1.4.1.164.12.3.1.1.11.1.3ColumnatmNteHostMaskread-createcurrentThe host interface subnet mask.
1.3.6.1.4.1.164.12.3.1.1.11.1.4ColumnatmNteHostAtmIfIndexread-createcurrentATM interface index. Will be 1 for user port, and 2 for network port.
1.3.6.1.4.1.164.12.3.1.1.11.1.5ColumnatmNteHostVpiread-createcurrentVPI of the PVC connected to that host interface.
1.3.6.1.4.1.164.12.3.1.1.11.1.6ColumnatmNteHostVciread-createcurrentVCI of the PVC connected to that host interface.
1.3.6.1.4.1.164.12.3.1.1.11.1.7ColumnatmNteHostRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.1.1.11.1.8ColumnatmNteHostRdnVpiread-createcurrentThe VPI of the redundant management VCL. This parameter is applicable only if atmNteRdnManagement=enable(3).
1.3.6.1.4.1.164.12.3.1.1.11.1.9ColumnatmNteHostRdnVciread-createcurrentThe VCI of the redundant management VCL. This parameter is applicable only if atmNteRdnManagement=enable(3).
1.3.6.1.4.1.164.12.3.1.1.11.1.10ColumnatmNteHostDefaultNextHopread-createcurrentThe host interface Default Next Hop address. This address will be used as default next hop for every Bundle mapped to this Host.
1.3.6.1.4.1.164.12.3.1.1.11.1.11ColumnatmNteHostVlanTaggingread-createcurrentVLAN Tag support. no - No support to VLAN. yes - 4 VLAN bytes will be added to each frame connected to this Host.
1.3.6.1.4.1.164.12.3.1.1.11.1.12ColumnatmNteHostDefaultVlanIDread-createcurrentDefault VLAN ID of this Host.
1.3.6.1.4.1.164.12.3.1.1.11.1.13ColumnatmNteHostDefaultVlanPriorityread-createcurrentDefault VLAN priority for this Host.
1.3.6.1.4.1.164.12.3.1.1.12ScalaratmNteShaperModeread-writecurrentShaper Mode. vpInbandMng - Vcc within a Vp for management.
1.3.6.1.4.1.164.12.3.1.1.13ScalaratmNteOutputRateread-writecurrentAggregate shaping output rate in Cells per Seconds units. Default value is the Network port rate.
1.3.6.1.4.1.164.12.3.1.1.14ScalaratmNteTosModeread-writecurrentTOS Mode.
1.3.6.1.4.1.164.12.3.1.1.15ScalaratmNteTosMaskread-writecurrentThis parameter determines the seqence of bits that will be used for TOS. For ACE101 this parameter is applicable only if atmNteTosMode = enable. Valid only for…
1.3.6.1.4.1.164.12.3.1.1.16ScalaratmNteTosHighPriorityread-writecurrentPriorities options are High or Low. High priority will be represented by bit = 1. Low priority will be represented by bit = 0. Each TOS value will be represent…
1.3.6.1.4.1.164.12.3.1.1.17ScalaratmNtePlugAndPlayActivityread-writecurrentActivity control for Manager Plug And Play. disable - disable the feature. offline - Automatic learn IP address into offline memory. online - Automatic learn I…
1.3.6.1.4.1.164.12.3.1.1.18ScalaratmNteSlotUsageread-writecurrentApplicable to ace2002. Slot 2 might be configured as user slot or as network slot.
1.3.6.1.4.1.164.12.3.1.1.19ScalaratmNteConnectionsMaxNumberread-writecurrentThe MAX number of connections supported by system. Setting this parameter will affect the number of MAX intervals supported. This parameter will affect the sys…
1.3.6.1.4.1.164.12.3.1.1.20ScalaratmNteDefaultVpiread-writecurrentDefault Vpi for management.
1.3.6.1.4.1.164.12.3.1.1.21ScalaratmNteDefaultVciread-writecurrentDefault Vci for management.
1.3.6.1.4.1.164.12.3.1.1.22ScalaratmNteReservedVpiread-writecurrentInternal use VPI, where shaperMode=vpInbandMng.
1.3.6.1.4.1.164.12.3.1.1.23ScalaratmNteRdnManagementread-onlycurrentThe redundancy management status.
1.3.6.1.4.1.164.12.3.1.1.24ScalaratmNtePlugAndPlayIfIndexread-writecurrentThe ifIndex of the Plug and Play VCC.
1.3.6.1.4.1.164.12.3.1.1.25ScalaratmNteLoopbackTimeoutread-writecurrentThe Loopback state timeout in minutes. A value of zero means no timeout (for ever). Default is 5 min.
1.3.6.1.4.1.164.12.3.1.1.26TableatmNteOamTablenot-accessiblecurrentThis table is a static table, which is created by agent once upon initialization. The created entries are actually, only the supported OAM features. This table…
1.3.6.1.4.1.164.12.3.1.1.26.1RowatmNteOamEntrynot-accessiblecurrentAn entry in the OAM table. Each entry in this table will indicate a special OAM.
1.3.6.1.4.1.164.12.3.1.1.26.1.1ColumnatmNteOamModeread-onlycurrentThe OAM cell path. endToEnd(1) - the entire path.
1.3.6.1.4.1.164.12.3.1.1.26.1.2ColumnatmNteOamCellTyperead-onlycurrentThis object indicates a unique Indication Signal. aisAndRdi(1) - Alarm Indication Signal (AIS) and Remote Defect Indication (RDI) cell. loopback(2) - Loopback …
1.3.6.1.4.1.164.12.3.1.1.26.1.3ColumnatmNteOamLevelread-onlycurrentThe level of the OAM cell. f5 (3) - VC level.
1.3.6.1.4.1.164.12.3.1.1.26.1.4ColumnatmNteOamEnableread-writecurrentThis parameter determines if the specified OAM cells will be enabled.
1.3.6.1.4.1.164.12.3.1.1.27ScalaratmNteDefaultLoopbackThresholdread-writecurrentThe Default OAM Loopback Failure Threshold value that will be used for configuration.
1.3.6.1.4.1.164.12.3.1.1.28ScalaratmNteMaxBurstSizeread-writecurrentThe Maximum allowed burst size (cell units). This object is applicable for each Physical port.
1.3.6.1.4.1.164.12.3.1.1.29ScalaratmNteGranularityFactorread-writecurrentThis parameter affects the granularity of the guaranteed Rate (SCR+MCR) in spaced connection (cell/sec units). It is also defines the minimum guaranteed rate i…
1.3.6.1.4.1.164.12.3.1.1.30ScalaratmNteTotalInputRateread-onlycurrentThis parameter indicates the total input rate of the device in cells/sec.
1.3.6.1.4.1.164.12.3.1.1.31ScalaratmNteTotalOutputRateread-onlycurrentThis parameter indicates the total output rate of the device in cells/sec.
1.3.6.1.4.1.164.12.3.1.1.32TableatmAlarmForwardingTablenot-accessiblecurrentThe Alarm Forwarding Mechanism will be operated for this table entries.
1.3.6.1.4.1.164.12.3.1.1.32.1RowatmAlarmForwardingEntrynot-accessiblecurrentEach entry in this table is a pair of ports that the Alarm Forwarding Mechanism is determined for.
1.3.6.1.4.1.164.12.3.1.1.32.1.1ColumnatmAlarmForwardingFailPortnot-accessiblecurrentAn Index of the port on which a fail occurs.
1.3.6.1.4.1.164.12.3.1.1.32.1.2ColumnatmAlarmForwardingToPortnot-accessiblecurrentAn Index of the port that will be affected upon the failure of the atmAlarmForwardingFailPort.
1.3.6.1.4.1.164.12.3.1.1.32.1.3ColumnatmAlarmForwardingRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.1.1.32.1.4ColumnatmAlarmForwardingFailureLevelread-createcurrentThis parameter determines the level of failure that will operate the Alarm Forwarding Mechanism.
1.3.6.1.4.1.164.12.3.1.1.32.1.5ColumnatmAlarmForwardingRecoveryModeread-createcurrentThis parameter determines the Recovery Mode. manual - The user should stop the RDI transmission by using the atmAlarmForwardingRecoveryCommand. automatic - The…
1.3.6.1.4.1.164.12.3.1.1.32.1.6ColumnatmAlarmForwardingRecoveryCommandread-createcurrentThis parameter is a command. It is applicable when atmAlarmForwardingRecoveryMode = manual. on - Will stop the RDI transmission. After setting to 'On' the agen…
1.3.6.1.4.1.164.12.3.1.1.32.1.7ColumnatmAlarmForwardingTimeFilterWindowread-createcurrentThis parameter determines the Time Filter Window, meaning: how much time (in seconds) should the alarm exist in order to start the Alarm Forwarding operation.
1.3.6.1.4.1.164.12.3.1.1.33NodeatmSysConfigCellTest
1.3.6.1.4.1.164.12.3.1.1.33.1ScalaratmSysConfigCellTestPortread-writecurrentAn Index of the port on which the cell test will be sent.
1.3.6.1.4.1.164.12.3.1.1.33.2ScalaratmSysConfigCellTestVpiread-writecurrentThe VPI on which the cell test will be sent.
1.3.6.1.4.1.164.12.3.1.1.33.3ScalaratmSysConfigCellTestVciread-writecurrentThe VCI on which the cell test will be sent.
1.3.6.1.4.1.164.12.3.1.1.33.4ScalaratmSysConfigCellTestPtiread-writecurrentThe cell type.
1.3.6.1.4.1.164.12.3.1.1.33.5ScalaratmSysConfigCellTestClpread-writecurrentThe type of the Cell.
1.3.6.1.4.1.164.12.3.1.1.33.6ScalaratmSysConfigCellTestOamTyperead-writecurrentThe OAM type of the Cell. This object is applicable if atmSysConfigCellTestPti = oamSegment/oamEndToEnd .
1.3.6.1.4.1.164.12.3.1.1.33.7ScalaratmSysConfigCellTestPayloadread-writecurrentThe payload of the cell. For OAM cell the payload is set automatically to 6A.
1.3.6.1.4.1.164.12.3.1.1.33.8ScalaratmSysConfigCellTestQuantityread-writecurrentQuantity of cells to send.
1.3.6.1.4.1.164.12.3.1.1.33.9ScalaratmSysConfigCellTestSendCmdread-writecurrentSetting the variable to send(3) perfroms cell test. The agent will immediately reset the variable to off(2).
1.3.6.1.4.1.164.12.3.1.1.34TableatmVpCrossConnectExtenTablenot-accessiblecurrentAn extension to the ATM VP Cross Connect table (RFC2515 - atmVpCrossConnectTable).
1.3.6.1.4.1.164.12.3.1.1.34.1RowatmVpCrossConnectExtenEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.12.3.1.1.34.1.1ColumnatmVpCrossConnectNameread-createcurrentThe Connection's name.
1.3.6.1.4.1.164.12.3.1.1.35TableatmVcCrossConnectExtenTablenot-accessiblecurrentAn extension to the ATM VC Cross Connect table (RFC2515 - atmVcCrossConnectTable).
1.3.6.1.4.1.164.12.3.1.1.35.1RowatmVcCrossConnectExtenEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.12.3.1.1.35.1.1ColumnatmVcCrossConnectNameread-createcurrentThe Connection's name.
1.3.6.1.4.1.164.12.3.1.1.36TableatmCongestionThresholdTablenot-accessiblecurrentThe Congestion Thresholds Configuration Table.
1.3.6.1.4.1.164.12.3.1.1.36.1RowatmCongestionThresholdEntrynot-accessiblecurrentAn entry in the table.
1.3.6.1.4.1.164.12.3.1.1.36.1.1ColumnatmCongestionThresholdTypenot-accessiblecurrentThe Congestion Threshold Type.
1.3.6.1.4.1.164.12.3.1.1.36.1.2ColumnatmCongestionThresholdServiceCategorynot-accessiblecurrentThe Congestion Threshold Service Category.
1.3.6.1.4.1.164.12.3.1.1.36.1.3ColumnatmCongestionThresholdValueread-writecurrentThe Congestion Threshold Value.
1.3.6.1.4.1.164.12.3.1.1.37ScalaratmNteQosModeread-writecurrentThis variable defines the QoS Mode. disable(1) - QoS is disabled. multipleVc(2) - QoS is enabled and multiple VCs can be bound per bridge port. singleVc(3) - Q…
1.3.6.1.4.1.164.12.3.1.2NodeatmNteSysInfo
1.3.6.1.4.1.164.12.3.1.2.1TableatmNteIdTablenot-accessiblecurrentThe IDs of the cards and of the system.
1.3.6.1.4.1.164.12.3.1.2.1.1RowatmNteIdEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.3.1.2.1.1.1ColumnatmNteIdIndexread-onlycurrentAn Index of the Unit ID table. The following units have IDs in this table: 1 - System 2 - ATM Board 3 - User Card 4 - Trunk 1 card 5 - Trunk 2 card 6 - Shaper …
1.3.6.1.4.1.164.12.3.1.2.1.1.2ColumnatmNteUnitIdread-onlycurrentThe ID of the Unit. For index = 6, the id will describe the validity of a shaper in the system: 0 - Shaper Not exist 1 - Shaper exist. For index = 7, the id wi…
1.3.6.1.4.1.164.12.3.1.2.1.1.3ColumnatmNteUnitVersionread-onlycurrentHardware and Software version of the module.
1.3.6.1.4.1.164.12.3.1.2.1.1.4ColumnatmNteCardTyperead-onlycurrentThe card type.
1.3.6.1.4.1.164.12.3.1.2.1.1.5ColumnatmNteCardStatusread-onlycurrentStatus of the card in the selected slot. notActive - Connections are in NotReady state. No configuration is available for the card. The access to the card HW i…
1.3.6.1.4.1.164.12.3.1.2.1.1.6ColumnatmNteCardCmdread-writecurrentCommand on the card that is installed in the selected slot. The commands are applicable according to the value of atmNteCardStatus. See the specification docum…
1.3.6.1.4.1.164.12.3.1.2.1.1.7ColumnatmNteProgCardTyperead-writecurrentThe programmed card type.
1.3.6.1.4.1.164.12.3.1.2.2ScalaratmSysPSunitsread-onlycurrentThe number of power supply units.
1.3.6.1.4.1.164.12.3.1.2.3ScalaratmSysPSunitsInUseread-onlycurrentThe main power supply in this unit.
1.3.6.1.4.1.164.12.3.1.2.4ScalaratmSysFanUnitsread-onlycurrentThe number of fan units.
1.3.6.1.4.1.164.12.3.1.2.5ScalaratmSysNetPrtsread-onlycurrentThe number of network ports.
1.3.6.1.4.1.164.12.3.1.2.6ScalaratmSysNetPrtInUseread-onlycurrentThe network port in use.
1.3.6.1.4.1.164.12.3.1.2.7ScalaratmNteBridgingModeread-writecurrentBridging mode can be one of the following: ATM <> Ethernet - Bridging is between the Ethernet port and the ATM port (there is no bridging between VCs). ATM <> …
1.3.6.1.4.1.164.12.3.1.2.8NodeatmSysStats
1.3.6.1.4.1.164.12.3.1.2.8.1ScalaratmSysCurrentCdcread-onlycurrentSeconds in which cells dropped was occured in the current 15 minutes interval.
1.3.6.1.4.1.164.12.3.1.2.8.2TableatmSysIntervalTablenot-accessiblecurrentThe system level Interval table.
1.3.6.1.4.1.164.12.3.1.2.8.2.1RowatmSysIntervalEntrynot-accessiblecurrent.
1.3.6.1.4.1.164.12.3.1.2.8.2.1.1ColumnatmSysIntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.3.1.2.8.2.1.2ColumnatmSysIntervalCdcread-onlycurrentSeconds in which cells dropped was occured in 15 minutes interval.
1.3.6.1.4.1.164.12.3.1.2.9ScalaratmNteEventTyperead-onlycurrentThis parameter identifies the event. On - the problem exist. Off - the problem not exist. InvalidLogin - Invalid login on local console. CorrectLogin - Success…
1.3.6.1.4.1.164.12.3.1.2.10ScalaratmNteIntervalMaxNumberread-onlycurrentThe MAX number of connections intervals supported by system. This parameter value is a function of atmNteConnectionsMaxNumber parameter. This parameter should …
1.3.6.1.4.1.164.12.3.1.2.11ScalaratmNteAlarmTyperead-onlycurrentThis object specifies the type of the alarm.
1.3.6.1.4.1.164.12.3.1.2.12ScalaratmNteLevelread-onlycurrentThis object specifies the ATM level.
1.3.6.1.4.1.164.12.3.1.2.13ScalaratmNteConnectionsNumberread-onlycurrentThis object specifies a quantity of connections.
1.3.6.1.4.1.164.12.3.1.2.14ScalaratmNteTotalLbread-onlycurrentThis parameter counts the total number of end-points that were configured with Loopback (LB).
1.3.6.1.4.1.164.12.3.1.2.15ScalaratmNteTotalCcread-onlycurrentThis parameter counts the total number of end-points that were configured with Continuity Check (CC).
1.3.6.1.4.1.164.12.3.1.2.16ScalaratmNteTotalPmread-onlycurrentThis parameter counts the total number of end-points that were configured with PM.
1.3.6.1.4.1.164.12.3.2NodeatmNtePrt
1.3.6.1.4.1.164.12.3.2.1NodeatmNtePrtConfig
1.3.6.1.4.1.164.12.3.2.1.1TableatmNteConfIfTablenot-accessiblecurrentThe Physical interface configuration table.
1.3.6.1.4.1.164.12.3.2.1.1.1RowatmNteConfIfEntrynot-accessiblecurrentAn entry in the Physical interface configuration table. The ifIndex is of the lowest physical layer.
1.3.6.1.4.1.164.12.3.2.1.1.1.1ColumnatmConfIfTransmitClkread-writecurrentThe transmit clock of the port.
1.3.6.1.4.1.164.12.3.2.1.1.1.2ColumnatmConfIfLoopbackread-writecurrentInterface Loopback.
1.3.6.1.4.1.164.12.3.2.1.1.1.3ColumnatmConfIfFrameTyperead-writecurrentThe frame type. Valid values for a 155M interface: sonet(2), sdh(3). Valid values for a T3 interface: direct(4), plcpInternal(5), plcpExternal(6), directNoScrm…
1.3.6.1.4.1.164.12.3.2.1.1.1.4ColumnatmConfIfCardTyperead-onlydeprecatedThe card type.
1.3.6.1.4.1.164.12.3.2.1.1.1.5ColumnatmConfAtmIfVpiVciLimitread-onlycurrentThe limit on the sum of the VPI+VCI bits for this interface.
1.3.6.1.4.1.164.12.3.2.1.1.1.6ColumnatmConfIfHwFeaturesread-writecurrentHW features command.
1.3.6.1.4.1.164.12.3.2.1.1.1.7ColumnatmConfIfOutputRateread-writecurrentThis parameter indicates the output rate in cells/sec, which is supported per port. Successfully setting this parameter is dependent on all other ports values …
1.3.6.1.4.1.164.12.3.2.1.1.1.8ColumnatmConfIfInputRateread-writecurrentThis parameter indicates the input rate in cells/sec, which is supported per port. Successfully setting this parameter is dependent on all other ports values c…
1.3.6.1.4.1.164.12.3.2.1.1.1.9ColumnatmConfAlarmForwardingread-writecurrentEnables Path AIS Alarm forwarding upon a failure detection. The following might be considered as a failure: LOS, LOF, LOC, SLM, LOP, Path AIS and Line AIS. dis…
1.3.6.1.4.1.164.12.3.2.1.1.1.10ColumnatmConfIfAllocatedBwread-onlycurrentTotal VC Bandwidth Allocation.
1.3.6.1.4.1.164.12.3.2.1.1.1.11ColumnatmConfIfLowerVpiread-writecurrentThe Lower possible VPI.
1.3.6.1.4.1.164.12.3.2.1.1.1.12ColumnatmConfIfOamModeread-writecurrentOAM support Mode, which determines the interface's location in a segment wise.
1.3.6.1.4.1.164.12.3.2.1.2TableatmNteAlarmIfTablenot-accessiblecurrentThe interface Alarm table.
1.3.6.1.4.1.164.12.3.2.1.2.1RowatmNteAlarmIfEntrynot-accessiblecurrentAn entry in the interface Alarm table.
1.3.6.1.4.1.164.12.3.2.1.2.1.1ColumnatmInterfaceActiveAlarmsread-onlycurrentA Bit String of the active alarms on this interface. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. Th…
1.3.6.1.4.1.164.12.3.2.1.2.1.2ColumnatmThresholdSectionBIPread-writecurrentWhen Section BIPs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface.
1.3.6.1.4.1.164.12.3.2.1.2.1.3ColumnatmThresholdLineBIPread-writecurrentWhen Line BIPs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface.
1.3.6.1.4.1.164.12.3.2.1.2.1.4ColumnatmThresholdLineFEBEread-writecurrentWhen Line FEBEs are greater than this threshold, an active alarm is raised. N/A for ds3/e3 interface.
1.3.6.1.4.1.164.12.3.2.1.2.1.5ColumnatmThresholdPathBIPread-writecurrentWhen Path BIPs are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.6ColumnatmThresholdPathFEBEread-writecurrentWhen Path FEBEs are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.7ColumnatmThresholdErroredCellsread-writecurrentWhen Errored Cells are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.8ColumnatmThresholdLostCellsread-writecurrentWhen Lost Cells are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.9ColumnatmThresholdMisinsertedCellsread-writecurrentWhen Misinserted Cells are greater than this threshold, an active alarm is raised.
1.3.6.1.4.1.164.12.3.2.1.2.1.10ColumnatmInterfaceAlarmStatusread-onlycurrentThe variable is on(3) when there is any active alarm on this interface.
1.3.6.1.4.1.164.12.3.2.1.2.1.11ColumnatmInterfaceMaskAlarmsread-writecurrentA Bit String of alarms mask on this interface. An up bit (1) means that the respective alarm is masked. A down bit (0) means no mask. The mask is supported for…
1.3.6.1.4.1.164.12.3.2.1.3TableatmNteConfVpTablenot-accessiblecurrentThe ATM VP configuration table. The table is an extension to the atmVplTable of RFC-1695.
1.3.6.1.4.1.164.12.3.2.1.3.1RowatmNteConfVpEntrynot-accessiblecurrentAn entry in the ATM VP configuration table. ifIndex of the ATM layer.
1.3.6.1.4.1.164.12.3.2.1.3.1.1ColumnatmConfVpPolicingread-writecurrentPolicing method desired for this VPL.
1.3.6.1.4.1.164.12.3.2.1.3.1.2ColumnatmConfVpCCAdminStatusread-writecurrentup(2) - Activate Continuity Check (CC). down(3) - Deactivate CC. source(4) - Activate OAM CC(Continuity Check) of local agent ( start sending Oam cells to the …
1.3.6.1.4.1.164.12.3.2.1.3.1.3ColumnatmConfVpLoopbackAdminStatusread-writecurrentup(2) - Start loopback OAM cells. down(3) - Stop sending loopback OAM cells. For ace2002: up(2) - Transmitting LB cells with llid all ones (i.e. FFFF..FF) down…
1.3.6.1.4.1.164.12.3.2.1.3.1.4ColumnatmConfVpLoopbackSinkAddressread-writecurrentDestination address. For ace101: 2 bytes are used. For ace2002: 16 bytes are used.
1.3.6.1.4.1.164.12.3.2.1.3.1.5ColumnatmConfVpCongestionControlread-writecurrentEach bit indicates a selection of one option as the following description. All combinations are possible and legal. The codes are: 1 - EPD 2 - CLP 4 - EFCI
1.3.6.1.4.1.164.12.3.2.1.3.1.6ColumnatmConfVpCCDirectionread-writecurrentboth(2) - Agent send OAM CC cells and check received OAM CC cells source(4)- Agent send OAM CC cells. sink(5) - Agent checks received OAM CC cells.
1.3.6.1.4.1.164.12.3.2.1.3.1.7ColumnatmConfVpCreationTimeread-onlycurrentA date-time in which the VP was created.
1.3.6.1.4.1.164.12.3.2.1.3.1.8ColumnatmConfVpOamSupportread-writecurrentOAM support mode, which determines the device location in a segment wise.
1.3.6.1.4.1.164.12.3.2.1.3.1.9ColumnatmConfVpCCOperStatusread-onlycurrentinitial(1) - The CC activation process is not started. source(4) - Agent sends OAM CC cells. sink(5) - Agent checks received OAM CC cells. both (8) - OAM CC of…
1.3.6.1.4.1.164.12.3.2.1.3.1.10ColumnatmConfVpLoopbackTrafficread-writecurrentThis parameter has both command and status meanings: off(2) - Set to 'Off' will Stop traffic loop. Getting this value means that the loop is not running. on (3…
1.3.6.1.4.1.164.12.3.2.1.3.1.11ColumnatmConfVpLoopbackFailureIndread-writecurrentThis object allows user to define the Indication that will be created upon a LB cell failure. disabled(2) - no indication will be created. segmentAis(3) - will…
1.3.6.1.4.1.164.12.3.2.1.3.1.12ColumnatmConfVpLoopbackFailureThresholdread-writecurrentThe number of the LB failures before starting transmission of the Indication defined by atmConfVcLoopbackFailureInd. Range: 1..16. Default: 1.
1.3.6.1.4.1.164.12.3.2.1.3.1.13ColumnatmConfVpOamDirectionread-writecurrentThe direction of OAM cell insertion. downStream(2) - The OAM cell will be inserted in downStream. upStream(3) - The OAM cell will be inserted in upStream.
1.3.6.1.4.1.164.12.3.2.1.4TableatmNteConfVcTablenot-accessiblecurrentThe ATM VC configuration table. The table is an extension to the atmVclTable of RFC-1695.
1.3.6.1.4.1.164.12.3.2.1.4.1RowatmNteConfVcEntrynot-accessiblecurrentAn entry in the ATM VC configuration table. ifIndex of the ATM layer.
1.3.6.1.4.1.164.12.3.2.1.4.1.1ColumnatmConfVcPolicingread-writecurrentPolicing method desired for this VCL.
1.3.6.1.4.1.164.12.3.2.1.4.1.2ColumnatmConfVcCCAdminStatusread-writecurrentup(2) - Activate Continuity Check (CC). down(3) - Deactivate CC. source(4) - Activate OAM CC(Continuity Check) of local agent ( start sending Oam cells to the …
1.3.6.1.4.1.164.12.3.2.1.4.1.3ColumnatmConfVcLoopbackAdminStatusread-writecurrentup(2) - Start loopback OAM cells. down(3) - Stop sending loopback OAM cells. For ace2002: up(2) - Transmitting LB cells with llid all ones (i.e. FFFF..FF) down…
1.3.6.1.4.1.164.12.3.2.1.4.1.4ColumnatmConfVcLoopbackSinkAddressread-writecurrentDestination address. For ace101: 2 bytes are used. For ace2002: 16 bytes are used.
1.3.6.1.4.1.164.12.3.2.1.4.1.5ColumnatmConfVcCongestionControlread-writecurrentEach bit indicates a selection of one option as the following description. All combinations are possible and legal. The codes are: 1 - EPD 2 - CLP 4 - EFCI. Fo…
1.3.6.1.4.1.164.12.3.2.1.4.1.6ColumnatmConfVcCCDirectionread-writecurrentboth(2) - Agent send OAM CC cells and check receivev OAM CC cells none(3) - Agent does not send and does not check received OAM CC cells. source(4)- Agent send…
1.3.6.1.4.1.164.12.3.2.1.4.1.7ColumnatmConfVcCreationTimeread-onlycurrentA date-time in which the VC was created.
1.3.6.1.4.1.164.12.3.2.1.4.1.8ColumnatmConfVcOamSupportread-writecurrentOAM support mode, which determines the device location in a segment wise. segmentAndEndToEnd - In this mode the OAM cells are generated before the ABM (ATM Buf…
1.3.6.1.4.1.164.12.3.2.1.4.1.9ColumnatmConfVcCCActivationCtrlread-writecurrentmanual(1) - CC Activation process is disable activator(2) - ACE-101 initiate CC Activation process listener(3) - ACE-101 wait to CC Activation request from rem…
1.3.6.1.4.1.164.12.3.2.1.4.1.10ColumnatmConfVcCCOperStatusread-onlycurrentinitial (1) - The CC activation process is not started. up (2) - Continuity Check (CC) activated. down (3) - CC deactivated. source (4) - OAM CC(Continuity Che…
1.3.6.1.4.1.164.12.3.2.1.4.1.11ColumnatmConfVcLoopbackTrafficread-writecurrentThis parameter has both command and status meanings: off(2) - Set to 'Off' will Stop traffic loop. Getting this value means that the loop is not running. on (3…
1.3.6.1.4.1.164.12.3.2.1.4.1.12ColumnatmConfVcLoopbackFailureIndread-writecurrentThis object allows user to define the Indication that will be created upon a LB cell failure. disabled(2) - no indication will be created. segmentAis(3) - will…
1.3.6.1.4.1.164.12.3.2.1.4.1.13ColumnatmConfVcLoopbackFailureThresholdread-writecurrentThe number of the LB failures before starting transmission of the Indication defined by atmConfVcLoopbackFailureInd. Range: 1..16. Default: 1.
1.3.6.1.4.1.164.12.3.2.1.4.1.14ColumnatmConfVcOamDirectionread-writecurrentThe direction of OAM cell insertion. downStream(2) - The OAM cell will be inserted in downStream. upStream(3) - The OAM cell will be inserted in upStream.
1.3.6.1.4.1.164.12.3.2.1.4.1.15ColumnatmConfVcNameread-writecurrentVC Name.
1.3.6.1.4.1.164.12.3.2.1.4.1.16ColumnatmConfVcConnectedread-onlycurrentThis object indicates whether this VC is connected.
1.3.6.1.4.1.164.12.3.2.1.5TableatmNteAlarmVpTablenot-accessiblecurrentThe ATM VP Alarm table.
1.3.6.1.4.1.164.12.3.2.1.5.1RowatmNteAlarmVpEntrynot-accessiblecurrentAn entry in the ATM VP Alarm table. ifIndex of the ATM layer.
1.3.6.1.4.1.164.12.3.2.1.5.1.1ColumnatmNteVpAlarmVpiread-onlycurrentThe VPI on which there is an active alarm.
1.3.6.1.4.1.164.12.3.2.1.5.1.2ColumnatmNteVpActiveAlarmsread-onlycurrentA Bit String of the active alarms on this VP. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meani…
1.3.6.1.4.1.164.12.3.2.1.6TableatmNteAlarmVcTablenot-accessiblecurrentThe ATM VC Alarm table.
1.3.6.1.4.1.164.12.3.2.1.6.1RowatmNteAlarmVcEntrynot-accessiblecurrentAn entry in the ATM VC Alarm table. ifIndex of the ATM layer.
1.3.6.1.4.1.164.12.3.2.1.6.1.1ColumnatmNteVcAlarmVpiread-onlycurrentThe VPI of the VC on which there is an active alarm.
1.3.6.1.4.1.164.12.3.2.1.6.1.2ColumnatmNteVcAlarmVciread-onlycurrentThe VCI of the VC on which there is an active alarm.
1.3.6.1.4.1.164.12.3.2.1.6.1.3ColumnatmNteVcActiveAlarmsread-onlycurrentA Bit String of the active alarms on this VC. An up bit (1) means there is an active alarm of this type. A down bit (0) means there is no such alarm. The meani…
1.3.6.1.4.1.164.12.3.2.2NodeatmNteLoopback
1.3.6.1.4.1.164.12.3.2.2.1TableatmLoopbackVpTablenot-accessiblecurrentThis table contains parameters for an OAM VP loopback test.
1.3.6.1.4.1.164.12.3.2.2.1.1RowatmLoopbackVpEntrynot-accessiblecurrentAn entry in table atmLoopbackVpTable.
1.3.6.1.4.1.164.12.3.2.2.1.1.1ColumnatmLoopbackVpIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.2.1.1.2ColumnatmLoopbackVpVpiread-onlycurrentThe VPI of the OAM VPL.
1.3.6.1.4.1.164.12.3.2.2.1.1.3ColumnatmLoopbackVpOperStatusread-onlycurrent-noActive(1) means that the loopback test has not been activated for this VP. -inProgress(2) means that the test has been activated and there is currently no p…
1.3.6.1.4.1.164.12.3.2.2.1.1.4ColumnatmLoopbackVpCDVread-onlycurrentCell Delay Variation for this sampling.
1.3.6.1.4.1.164.12.3.2.2.1.1.5ColumnatmLoopbackVpAverageDelayread-onlycurrentAverage delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.1.1.6ColumnatmLoopbackVpMaxDelayread-onlycurrentMaximum delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.1.1.7ColumnatmLoopbackVpMinDelayread-onlycurrentMinimum delay.
1.3.6.1.4.1.164.12.3.2.2.1.1.8ColumnatmLoopbackVpErrSessionsread-onlycurrentErrored Sessions. Will be updated once in 5 seconds.
1.3.6.1.4.1.164.12.3.2.2.2TableatmLoopbackVcTablenot-accessiblecurrentThis table contains parameters for an OAM VC loopback test.
1.3.6.1.4.1.164.12.3.2.2.2.1RowatmLoopbackVcEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.2.2.1.1ColumnatmLoopbackVcIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.2.2.1.2ColumnatmLoopbackVcVpiread-onlycurrentThe VPI of the OAM VCL.
1.3.6.1.4.1.164.12.3.2.2.2.1.3ColumnatmLoopbackVcVciread-onlycurrentThe VCI of the OAM VCL.
1.3.6.1.4.1.164.12.3.2.2.2.1.4ColumnatmLoopbackVcOperStatusread-onlycurrent-noActive(1) means that the loopback test has not been activated for this VP. -inProgress(2) means that the test has been activated and there is currently no p…
1.3.6.1.4.1.164.12.3.2.2.2.1.5ColumnatmLoopbackVcCDVread-onlycurrentCell Delay Variation for this sampling.
1.3.6.1.4.1.164.12.3.2.2.2.1.6ColumnatmLoopbackVcAverageDelayread-onlycurrentAverage delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.2.1.7ColumnatmLoopbackVcMaxDelayread-onlycurrentThe maximum delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.2.1.8ColumnatmLoopbackVcMinDelayread-onlycurrentThe minimum delay.
1.3.6.1.4.1.164.12.3.2.2.2.1.9ColumnatmLoopbackVcErrSessionsread-onlycurrentErrored Sessions. Will be updated once in 5 seconds.
1.3.6.1.4.1.164.12.3.2.2.3TableatmLoopbackVpIvlTablenot-accessiblecurrentThis table contains parameters for an OAM VP loopback test, according interval number.
1.3.6.1.4.1.164.12.3.2.2.3.1RowatmLoopbackVpIvlEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.2.3.1.1ColumnatmLoopbackVpIvlIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.2.3.1.2ColumnatmLoopbackVpIvlVpiread-onlycurrentThe VPI of the OAM VPL.
1.3.6.1.4.1.164.12.3.2.2.3.1.3ColumnatmLoopbackVpIvlIvlread-onlycurrentThe relevant interval number.
1.3.6.1.4.1.164.12.3.2.2.3.1.4ColumnatmLoopbackVpIvlOperStatusread-onlycurrent-noActive(1) means that the loopback test has not been activated for this VP during this interval. -inProgress(2) has no meaning for an ended interval. -failed…
1.3.6.1.4.1.164.12.3.2.2.3.1.5ColumnatmLoopbackVpIvlCDVread-onlycurrentCell Delay Variation for this interval.
1.3.6.1.4.1.164.12.3.2.2.3.1.6ColumnatmLoopbackVpIvlAverageDelayread-onlycurrentAverage delay without including lost cells for this interval.
1.3.6.1.4.1.164.12.3.2.2.3.1.7ColumnatmLoopbackVpIvlMaxDelayread-onlycurrentThe maximum delay without including lost cells for this interval.
1.3.6.1.4.1.164.12.3.2.2.3.1.8ColumnatmLoopbackVpIvlMinDelayread-onlycurrentThe minimum delay for this interval.
1.3.6.1.4.1.164.12.3.2.2.3.1.9ColumnatmLoopbackVpIvlErrSessionsread-onlycurrentErrored Sessions. Will be updated once in 5 seconds.
1.3.6.1.4.1.164.12.3.2.2.4TableatmLoopbackVcIvlTablenot-accessiblecurrentThis table contains parameters for an OAM VC loopback test.
1.3.6.1.4.1.164.12.3.2.2.4.1RowatmLoopbackVcIvlEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.2.4.1.1ColumnatmLoopbackVcIvlIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.2.4.1.2ColumnatmLoopbackVcIvlVpiread-onlycurrentThe VPI of the OAM VCL.
1.3.6.1.4.1.164.12.3.2.2.4.1.3ColumnatmLoopbackVcIvlVciread-onlycurrentThe VCI of the OAM VCL.
1.3.6.1.4.1.164.12.3.2.2.4.1.4ColumnatmLoopbackVcIvlIvlread-onlycurrentThe relevant interval number.
1.3.6.1.4.1.164.12.3.2.2.4.1.5ColumnatmLoopbackVcIvlOperStatusread-onlycurrent-noActive(1) means that the loopback test has not been activated for this VC during this interval. -inProgress(2) has no meaning per interval. -failed(3) means…
1.3.6.1.4.1.164.12.3.2.2.4.1.6ColumnatmLoopbackVcIvlCDVread-onlycurrentCell Delay Variation for this interval.
1.3.6.1.4.1.164.12.3.2.2.4.1.7ColumnatmLoopbackVcIvlAverageDelayread-onlycurrentAverage delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.4.1.8ColumnatmLoopbackVcIvlMaxDelayread-onlycurrentThe maximum delay without including lost cells.
1.3.6.1.4.1.164.12.3.2.2.4.1.9ColumnatmLoopbackVcIvlMinDelayread-onlycurrentThe minimum delay.
1.3.6.1.4.1.164.12.3.2.2.4.1.10ColumnatmLoopbackVcIvlErrSessionsread-onlycurrentErrored Sessions. Will be updated once in 5 seconds.
1.3.6.1.4.1.164.12.3.2.3NodeatmNtePM
1.3.6.1.4.1.164.12.3.2.3.1TableatmVpPmTablenot-accessiblecurrentThis table contains parameters for VP performance monitoring.
1.3.6.1.4.1.164.12.3.2.3.1.1RowatmVpPmEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.3.1.1.1ColumnatmVpPmIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.3.1.1.2ColumnatmVpPmVpiread-onlycurrentThe VPI of the Performance Monitoring VPL.
1.3.6.1.4.1.164.12.3.2.3.1.1.3ColumnatmVpPmAdminStatusread-createcurrentup(2) - Activate PM. down(3) - Deactivate PM. listenToActivationCells(4) - . originateActivationCells(5) - .
1.3.6.1.4.1.164.12.3.2.3.1.1.4ColumnatmVpPmDirectionread-createcurrentThe direction of PM.
1.3.6.1.4.1.164.12.3.2.3.1.1.5ColumnatmVpPmBlockSizeread-createcurrentValid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768.
1.3.6.1.4.1.164.12.3.2.3.1.1.6ColumnatmVpPmRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.2.3.1.1.7ColumnatmVpPmSinkread-createcurrentoff (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.
1.3.6.1.4.1.164.12.3.2.3.1.1.8ColumnatmVpPmSourceread-createcurrentoff (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.
1.3.6.1.4.1.164.12.3.2.3.2TableatmVcPmTablenot-accessiblecurrentThis table contains parameters for VC performance monitoring.
1.3.6.1.4.1.164.12.3.2.3.2.1RowatmVcPmEntrynot-accessiblecurrentAn entry in table.
1.3.6.1.4.1.164.12.3.2.3.2.1.1ColumnatmVcPmIfIndexread-onlycurrentThe interface index of the ATM layer.
1.3.6.1.4.1.164.12.3.2.3.2.1.2ColumnatmVcPmVpiread-onlycurrentThe VPI of the Performance Monitoring VCL.
1.3.6.1.4.1.164.12.3.2.3.2.1.3ColumnatmVcPmVciread-onlycurrentThe VCI of the PM VCL.
1.3.6.1.4.1.164.12.3.2.3.2.1.4ColumnatmVcPmAdminStatusread-createcurrentup(2) - Activate PM. down(3) - Deactivate PM. listenToActivationCells(4) - . originateActivationCells(5) - .
1.3.6.1.4.1.164.12.3.2.3.2.1.5ColumnatmVcPmDirectionread-createcurrentThe direction of PM.
1.3.6.1.4.1.164.12.3.2.3.2.1.6ColumnatmVcPmBlockSizeread-createcurrentValid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768.
1.3.6.1.4.1.164.12.3.2.3.2.1.7ColumnatmVcPmRowStatusread-createcurrentCreation/Deletion of rows in the table.
1.3.6.1.4.1.164.12.3.2.3.2.1.8ColumnatmVcPmSinkread-createcurrentoff (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.
1.3.6.1.4.1.164.12.3.2.3.2.1.9ColumnatmVcPmSourceread-createcurrentoff (1) - Deactivate PM. fwd (2) - Activate Forward PM only. fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.
1.3.6.1.4.1.164.12.3.3NodeatmNteMdl
1.3.6.1.4.1.164.12.3.3.1NodeatmNteMdlConfig
1.3.6.1.4.1.164.12.3.3.1.1TableatmNteMdlConfigTablenot-accessiblecurrentModule configuration table.
1.3.6.1.4.1.164.12.3.3.1.1.1RowatmNteMdlConfigEntrynot-accessiblecurrentThere is an entry in this table just for those modules that have parameters that are relevant to module level only.
1.3.6.1.4.1.164.12.3.3.1.1.1.1ColumnatmNteMdlSlotIndexnot-accessiblecurrentThe slot number.
1.3.6.1.4.1.164.12.3.3.1.1.1.2ColumnatmNteMdlPrtCpuSharingread-writecurrentThis object lets the user decide what will be the CPU sharing between the ports of the module. This object is applicable for modules in which the same CPU hand…
1.3.6.1.4.1.164.12.3.3.1.1.1.3ColumnatmNteMdlInputPriorityMechanismread-writecurrentThis object allows the user to Enable/Disable the Input priority mechanism. This object is applicable for modules with more than one port, in which the total p…
1.3.6.1.4.1.164.12.5NoderadAtmIma
1.3.6.1.4.1.164.12.5.1ScalarimaPrimaryClkread-writecurrentClock source to be transmitted to the user side, where user module is in 'External' clock source.
1.3.6.1.4.1.164.12.5.2TableimaXLinkTablenot-accessiblecurrentThe IMA Link Status and Configuration table. This table contains additional objects for the link table.
1.3.6.1.4.1.164.12.5.2.1RowimaXLinkEntrynot-accessiblecurrentAn entry in the IMA Link table.
1.3.6.1.4.1.164.12.5.2.1.1ColumnimaLinkDirectionread-writecurrentthe Link direction.
1.3.6.1.4.1.164.12.5.2.1.2ColumnimaLinkItcLBClkSrcread-writecurrentClock source for the current Tx-line.
1.3.6.1.4.1.164.12.5.3TableimaXGroupTablenot-accessiblecurrentThe IMA group Status and Configuration table. This table contains additional objects for the Group table.
1.3.6.1.4.1.164.12.5.3.1RowimaXGroupEntrynot-accessiblecurrentAn entry in the IMA Group table.
1.3.6.1.4.1.164.12.5.3.1.1ColumnimaGroupVersionread-writecurrentIMA Version.
1.3.6.1.4.1.164.12.5.3.1.2ColumnimaGroupCtcTxClkSrcread-writecurrentThe source of the transmitted, common, Clock Source. Applicable if imaGroupNeTxClkMode=ctc(1). Automatic - Dynamic source, taken from the currently reference l…
1.3.6.1.4.1.164.12.5.3.1.3ColumnimaGroupCtcTxClkSrcPortread-writecurrentThis parameter is valid only when imaGroupCtcTxClkSrc=loopback. The value may be any port identifier.
1.3.6.1.4.1.164.12.7NodeatmLayer2
1.3.6.1.4.1.164.12.7.1TableatmLayer2XVclTablenot-accessiblecurrentThis table is an extension of VCL table, which is created for each LAN VCC.
1.3.6.1.4.1.164.12.7.1.1RowatmLayer2XVclEntrynot-accessiblecurrentConceptual row in atmVclTable. This table augments the RFC2515 VCL table.
1.3.6.1.4.1.164.12.7.1.1.1ColumnatmLayer2XVclConnModeread-createcurrentEach valid LAN VCC is either Main or Sub. This parameter is configured only once on creation of a LAN VCC. It can not be changed after creation. In order to ch…
1.3.6.1.4.1.164.12.7.1.1.2ColumnatmLayer2XVclGroupIdxread-onlycurrentThe group identifier. A VCC Group identifier = 0 if the VCC was not associated with a group yet. This value is updated according to the group identifier set by…
1.3.6.1.4.1.164.12.7.2TableatmLayer2GroupTablenot-accessiblecurrentThis table contains groups and their members. A group is a bundle of VCCs, which acts as different queues. Main and Sub VCCs should have the same ATM slot and …
1.3.6.1.4.1.164.12.7.2.1RowatmLayer2GroupEntrynot-accessiblecurrentConceptual row in atmLayer2GroupTable. The indexes: ifIndex, atmVclVpi and atmVclVci indicate the Network ATM End-Point. Upon a group creation, one Main VCC mu…
1.3.6.1.4.1.164.12.7.2.1.1ColumnatmLayer2GroupIdxread-onlycurrentThe group identifier. 0 is not a valid index.
1.3.6.1.4.1.164.12.7.2.1.2ColumnatmLayer2GroupRowStatusread-createcurrentCreation/Deletion of rows in the table, and indication of the entry's status.
1.3.6.1.4.1.164.12.7.2.1.3ColumnatmLayer2GroupConnModeread-onlycurrentEach valid LAN VCC is either Main or Sub as configured in atmLayer2XVclTable.
1.3.6.1.4.1.164.12.7.2.1.4ColumnatmLayer2GroupConnPriorityread-onlycurrentThis parameter is configured by atmLayer2PriorityRx from atmLayer2PriorityTable. Each bit in the Octet represents a specific priority as follows: MSB 7 6 5 4 3…
1.3.6.1.4.1.164.12.7.2.1.5ColumnatmLayer2GroupNameread-createcurrentGroup name. Configured by the user. The name is unique per system. For atmLayer2GroupIdx=0, the name will be null.
1.3.6.1.4.1.164.12.7.3TableatmLayer2PriorityTablenot-accessiblecurrentThis table maps all priorities inside a group. Several priorities might be mapped to the same VCC. Upon priority change, the agent will update the VCCs of the …
1.3.6.1.4.1.164.12.7.3.1RowatmLayer2PriorityEntrynot-accessiblecurrentConceptual row in atmLayer2PriorityTable. Each entry is a Network ATM End-Point per priority. Upon a group creation, all priorities are mapped to the Main VCC.…
1.3.6.1.4.1.164.12.7.3.1.1ColumnatmLayer2PriorityGroupIdxread-onlycurrentThe group identifier.
1.3.6.1.4.1.164.12.7.3.1.2ColumnatmLayer2PriorityRxread-onlycurrentThe priority values. The used values are 0-7, but since this value is part of the index of the table, and in order to avoid '0' as an index, the index syntax i…
1.3.6.1.4.1.164.12.7.3.1.3ColumnatmLayer2PriorityIfIndexread-createcurrentATM ifIndex of the network End-Point.
1.3.6.1.4.1.164.12.7.3.1.4ColumnatmLayer2PriorityVclVpiread-createcurrentVpi of the network End-Point.
1.3.6.1.4.1.164.12.7.3.1.5ColumnatmLayer2PriorityVclVciread-createcurrentVci of the network End-Point.
1.3.6.1.4.1.164.12.7.4ScalaratmLayer2GroupIndexNextread-onlycurrentThis object contains an appropriate value to be used for atmLayer2GroupIdx when creating entries in the atmLayer2GroupTable. The value 0 indicates that no unas…
1.3.6.1.4.1.164.12.7.5TableatmLayer2CfgTablenot-accessiblecurrentBridge configuration Table. This table supports multi-bridge and bridge features within an ATM device.
1.3.6.1.4.1.164.12.7.5.1RowatmLayer2CfgEntrynot-accessiblecurrentConceptual row in atmLayer2CfgTable. Each entry in this table contains the bridging attributes for both Ethernet and ATM sides. The interface index is the Ethe…
1.3.6.1.4.1.164.12.7.5.1.1ColumnatmLayer2CfgBridgingModeread-writecurrentBridging mode can be one of the following: ATM <> Ethernet - Bridging is between the Ethernet port and the ATM port (there is no bridging between VCs). ATM <> …
1.3.6.1.4.1.164.12.7.5.1.2ColumnatmLayer2CfgVlanModeread-writecurrentVLAN Mode. Upon Mode changing, all LAN VCCs will be deleted by the agent from all tables that include LAN VCCs.
1.3.6.1.4.1.164.12.7.5.1.3ColumnatmLayer2CfgAtmAcceptableFrameTyperead-writecurrentThe Frame Type that will be acceptable by the VCCs that are associated with this Ethernet port. Frames which don't match the selected type will be discarded. a…
1.3.6.1.4.1.164.12.7.5.1.4ColumnatmLayer2CfgAtmIngressFilteringread-writecurrentFor the VCCs that are associated with this Ethernet port, when this is true(1) the device will discard incoming frames for VLANs which do not include this Port…
1.3.6.1.4.1.164.12.7.5.1.5ColumnatmLayer2CfgAtmTxFrameTyperead-writecurrentThe Frame Type that will be transmitted by the VCCs that are associated with this Ethernet port. unTagged - The transmitted frames will be unTagged. tagged - T…
1.3.6.1.4.1.164.12.7.5.1.6ColumnatmLayer2CfgEthAcceptableFrameTyperead-writecurrentThe Frame Type that this Ethernet port will accept. (for ACE-52: the Frame Type that this Bridge will accept) This parameter is notApplicable for atmLayer2Vlan…
1.3.6.1.4.1.164.12.7.5.1.7ColumnatmLayer2CfgBridgeActionread-writecurrentThis object enables to perform the specified action on the selected port.
1.3.6.1.4.1.164.12.7.5.1.8ColumnatmLayer2CfgLearningModeread-writecurrentThis object specifies the mode of the learning process of a bridge. svl - Shared VLAN process. If an individual MAC Address is learned in one VLAN, this inform…
1.3.6.1.4.1.164.12.7.5.1.9ColumnatmLayer2CfgAgingTimeread-writecurrentThe timeout period in seconds for aging out dynamically learned forwarding information.
1.3.6.1.4.1.164.12.8NoderadAtmFr
1.3.6.1.4.1.164.12.8.1TablefrAtmIwfXConnectionTablenot-accessiblecurrentThis table is an extension of frAtmIwfXConnectionTable from RFC2955.
1.3.6.1.4.1.164.12.8.1.1RowfrAtmIwfXConnectionEntrynot-accessiblecurrentConceptual row in frAtmIwfXConnectionTable. This table augments the RFC2955.
1.3.6.1.4.1.164.12.8.1.1.1ColumnfrAtmIwfXConnModeread-createcurrentFR IWF Mode. service - Service InterWorking (FRF.8), network - Network InterWorking (FRF.5).
1.3.6.1.4.1.164.12.8.1.1.2ColumnfrAtmIwfXConnSscsDlciread-createcurrentThis parameter is relevant for frAtmIwfXConnMode=network (FRF.5) only. This parameter allow configuration of the FR SSCS DLCI that is transferred to the remote…
1.3.6.1.4.1.164.12.9NodeatmCes
1.3.6.1.4.1.164.12.9.1NodeatmCesPerformance
1.3.6.1.4.1.164.12.9.1.1TableatmCesAal1CurrentTablenot-accessiblecurrentThe AAL1 Current table.
1.3.6.1.4.1.164.12.9.1.1.1RowatmCesAal1CurrentEntrynot-accessiblecurrentAn entry in the AAL1 Current table.
1.3.6.1.4.1.164.12.9.1.1.1.1ColumnatmCesAal1CurrentIfIndexread-onlycurrentThe index of the AAL1 interface. It may be ifIndex.
1.3.6.1.4.1.164.12.9.1.1.1.2ColumnatmCesAal1CurrentSeqErrorsread-onlycurrentThe counter associated with the number of Discarded cells due to wrong sequence number, encountered by an AAL1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.9.1.1.1.3ColumnatmCesAal1CurrentHdrErrorsread-onlycurrentThe counter associated with the number of Discarded cells due to bad AAL1 header error (including correctable and uncorrectable CRC, and bad parity), encounter…
1.3.6.1.4.1.164.12.9.1.1.1.4ColumnatmCesAal1CurrentPointerReframesread-onlycurrentThe counter associated with the number of events in which a SDT pointer isn't where it is expected to be, and must be reacquired, encountered by an AAL1 interf…
1.3.6.1.4.1.164.12.9.1.1.1.5ColumnatmCesAal1CurrentBufUnderflowsread-onlycurrentThe counter associated with the number of buffer underflow events, encountered by an AAL1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.9.1.1.1.6ColumnatmCesAal1CurrentBufOverflowsread-onlycurrentThe counter associated with the number of buffer overflow events, encountered by an AAL1 interface in the current 15 minute interval.
1.3.6.1.4.1.164.12.9.1.2TableatmCesAal1IntervalTablenot-accessiblecurrentThe AAL1 Interval table.
1.3.6.1.4.1.164.12.9.1.2.1RowatmCesAal1IntervalEntrynot-accessiblecurrentAn entry in the AAL1 Interval table.
1.3.6.1.4.1.164.12.9.1.2.1.1ColumnatmCesAal1IntervalIfIndexread-onlycurrentThe index of the AAL1 interface. It may be ifIndex.
1.3.6.1.4.1.164.12.9.1.2.1.2ColumnatmCesAal1IntervalNumberread-onlycurrentA number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that …
1.3.6.1.4.1.164.12.9.1.2.1.3ColumnatmCesAal1IntervalSeqErrorsread-onlycurrentThe counter associated with the number of Discarded cells due to wrong sequence number, encountered by an AAL1 interface in one of the previous 96, individual …
1.3.6.1.4.1.164.12.9.1.2.1.4ColumnatmCesAal1IntervalHdrErrorsread-onlycurrentThe counter associated with the number of Discarded cells due to bad AAL1 header error (including correctable and uncorrectable CRC, plus bad parity), encounte…
1.3.6.1.4.1.164.12.9.1.2.1.5ColumnatmCesAal1IntervalPointerReframesread-onlycurrentThe counter associated with the number of events in which a SDT pointer isn't where it is expected to be, and must be reacquired, encountered by an AAL1 interf…
1.3.6.1.4.1.164.12.9.1.2.1.6ColumnatmCesAal1IntervalBufUnderflowsread-onlycurrentThe counter associated with the number of buffer underflow events, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.9.1.2.1.7ColumnatmCesAal1IntervalBufOverflowsread-onlycurrentThe counter associated with the number of buffer overflow events, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, intervals.
1.3.6.1.4.1.164.12.9.2NodeatmCesConfiguration
1.3.6.1.4.1.164.12.9.2.1TableatmCesXConfTablenot-accessiblecurrentThis table is an extension of atmfCESConfTable table.
1.3.6.1.4.1.164.12.9.2.1.1RowatmCesXConfEntrynot-accessiblecurrentConceptual row in atmfCESConfTable. A new row is created in this table upon each new CES VCC creation.
1.3.6.1.4.1.164.12.9.2.1.1.1ColumnatmCesXConfCBRModeread-createcurrentThis parameter defines if to use Spaced or Normal CBR. Normal - TD will be allocated from the policing range (described in ACE2002 NMS SRS). The PCR is expande…
1.3.6.1.4.1.164.12.10NoderadAtmRouter
1.3.6.1.4.1.164.12.10.1TableatmIpoaLisIfMappingXTablenot-accessiblecurrentThis table is an extension of a table from RFC 2320: ipoaLisIfMappingTable - The ATM Logical IP Subnet Interface Mapping Table.
1.3.6.1.4.1.164.12.10.1.1RowatmIpoaLisIfMappingXEntrynot-accessiblecurrentConceptual row in ipoaLisIfMappingTable.
1.3.6.1.4.1.164.12.10.1.1.1ColumnatmIpoaLisIfMappingTyperead-createcurrentThis object indicates the Mapping Type.
1.3.6.1.4.1.164.12.10.1.1.2ColumnatmIpoaLisIfMappingIPAddressread-createcurrentThis parameter is applicable for atmIpoaLisIfMappingTypeIP=static(2). This parameter is the IP Address assigned by the user when applicable.
1.3.6.1.4.1.164.12.10.2ScalarradAtmRtrInAtmArpIntervalread-writecurrentThe time interval (in seconds) between sending of two InATMARP requests.
1.3.6.1.4.1.164.12.10.3ScalarradAtmRtrInAtmArpAgingTimeread-writecurrentThe time (in seconds) that passes until an entry is deleted, unless this entry was previously updated by a new inATMARP request or response. This variable valu…
1.3.6.1.4.1.164.20NoderadExperimental
MIB Viewer